summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--cmd/nand.c41
-rw-r--r--common/fb_nand.c2
-rw-r--r--common/spl/spl_nand.c7
-rw-r--r--doc/README.nand10
-rw-r--r--drivers/mtd/nand/Kconfig21
-rw-r--r--drivers/mtd/nand/am335x_spl_bch.c2
-rw-r--r--drivers/mtd/nand/atmel_nand.c2
-rw-r--r--drivers/mtd/nand/lpc32xx_nand_mlc.c2
-rw-r--r--drivers/mtd/nand/mxs_nand_spl.c2
-rw-r--r--drivers/mtd/nand/nand_spl_simple.c2
-rw-r--r--drivers/mtd/nand/nand_util.c2
-rw-r--r--drivers/mtd/nand/sunxi_nand_spl.c480
12 files changed, 383 insertions, 190 deletions
diff --git a/cmd/nand.c b/cmd/nand.c
index 583a18f..ffdeea4 100644
--- a/cmd/nand.c
+++ b/cmd/nand.c
@@ -647,6 +647,9 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
#ifdef CONFIG_CMD_NAND_TORTURE
if (strcmp(cmd, "torture") == 0) {
+ loff_t endoff;
+ unsigned int failed = 0, passed = 0;
+
if (argc < 3)
goto usage;
@@ -655,12 +658,37 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
return 1;
}
- printf("\nNAND torture: device %d offset 0x%llx size 0x%x\n",
- dev, off, mtd->erasesize);
- ret = nand_torture(mtd, off);
- printf(" %s\n", ret ? "Failed" : "Passed");
+ size = mtd->erasesize;
+ if (argc > 3) {
+ if (!str2off(argv[3], &size)) {
+ puts("Size is not a valid number\n");
+ return 1;
+ }
+ }
- return ret == 0 ? 0 : 1;
+ endoff = off + size;
+ if (endoff > mtd->size) {
+ puts("Arguments beyond end of NAND\n");
+ return 1;
+ }
+
+ off = round_down(off, mtd->erasesize);
+ endoff = round_up(endoff, mtd->erasesize);
+ size = endoff - off;
+ printf("\nNAND torture: device %d offset 0x%llx size 0x%llx (block size 0x%x)\n",
+ dev, off, size, mtd->erasesize);
+ while (off < endoff) {
+ ret = nand_torture(mtd, off);
+ if (ret) {
+ failed++;
+ printf(" block at 0x%llx failed\n", off);
+ } else {
+ passed++;
+ }
+ off += mtd->erasesize;
+ }
+ printf(" Passed: %u, failed: %u\n", passed, failed);
+ return failed != 0;
}
#endif
@@ -775,7 +803,8 @@ static char nand_help_text[] =
"nand bad - show bad blocks\n"
"nand dump[.oob] off - dump page\n"
#ifdef CONFIG_CMD_NAND_TORTURE
- "nand torture off - torture block at offset\n"
+ "nand torture off - torture one block at offset\n"
+ "nand torture off [size] - torture blocks from off to off+size\n"
#endif
"nand scrub [-y] off size | scrub.part partition | scrub.chip\n"
" really clean NAND erasing bad blocks (UNSAFE)\n"
diff --git a/common/fb_nand.c b/common/fb_nand.c
index e55ea38..ae34f48 100644
--- a/common/fb_nand.c
+++ b/common/fb_nand.c
@@ -34,7 +34,7 @@ __weak int board_fastboot_write_partition_setup(char *name)
}
static int fb_nand_lookup(const char *partname, char *response,
- struct mtd_info **nand,
+ struct mtd_info **mtd,
struct part_info **part)
{
struct mtd_device *dev;
diff --git a/common/spl/spl_nand.c b/common/spl/spl_nand.c
index 7cf0d1b..0e35e0f 100644
--- a/common/spl/spl_nand.c
+++ b/common/spl/spl_nand.c
@@ -134,6 +134,13 @@ int spl_nand_load_image(void)
#endif
/* Load u-boot */
err = spl_nand_load_element(CONFIG_SYS_NAND_U_BOOT_OFFS, header);
+#ifdef CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND
+#if CONFIG_SYS_NAND_U_BOOT_OFFS != CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND
+ if (err)
+ err = spl_nand_load_element(CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND,
+ header);
+#endif
+#endif
nand_deselect();
return err;
}
diff --git a/doc/README.nand b/doc/README.nand
index 96ffc48..f1c20ff 100644
--- a/doc/README.nand
+++ b/doc/README.nand
@@ -137,7 +137,7 @@ Configuration Options:
init:
/* chip is struct nand_chip, and is now provided by the driver. */
- mtd = &chip.mtd;
+ mtd = nand_to_mtd(&chip);
/*
* Fill in appropriate values if this driver uses these fields,
@@ -271,7 +271,7 @@ Platform specific options
However, for 4K pagesize NAND
NAND_PAGESIZE = 4096
- NAND_OOBSIZE = 64
+ NAND_OOBSIZE = 224
ECC_BYTES = 26
2 + (4096 / 512) * 26 = 210 < NAND_OOBSIZE
Thus BCH16 can be supported on 4K page NAND.
@@ -307,7 +307,7 @@ Miscellaneous and testing commands:
DANGEROUS!!! Factory set bad blocks will be lost. Use only
to remove artificial bad blocks created with the "markbad" command.
- "torture offset"
+ "torture offset [size]"
Torture block to determine if it is still reliable.
Enabled by the CONFIG_CMD_NAND_TORTURE configuration option.
This command returns 0 if the block is still reliable, else 1.
@@ -324,6 +324,10 @@ Miscellaneous and testing commands:
automate actions following a nand->write() error. This would e.g. be required
in order to program or update safely firmware to NAND, especially for the UBI
part of such firmware.
+ Optionally, a second parameter size can be given to test multiple blocks with
+ one call. If size is not a multiple of the NAND's erase size, then the block
+ that contains offset + size will be tested in full. If used with size, this
+ command returns 0 if all tested blocks have been found reliable, else 1.
NAND locking command (for chips with active LOCKPRE pin)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 2fc73ef..8c46a2f 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -99,16 +99,31 @@ config SYS_NAND_BUSWIDTH_16BIT
not available while configuring controller. So a static CONFIG_NAND_xx
is needed to know the device's bus-width in advance.
-# Enhance depends when converting drivers to Kconfig which use this config
+if SPL
+
+config SYS_NAND_U_BOOT_LOCATIONS
+ bool "Define U-boot binaries locations in NAND"
+ help
+ Enable CONFIG_SYS_NAND_U_BOOT_OFFS though Kconfig.
+ This option should not be enabled when compiling U-boot for boards
+ defining CONFIG_SYS_NAND_U_BOOT_OFFS in their include/configs/<board>.h
+ file.
+
config SYS_NAND_U_BOOT_OFFS
hex "Location in NAND to read U-Boot from"
default 0x8000 if NAND_SUNXI
- depends on NAND_SUNXI
+ depends on SYS_NAND_U_BOOT_LOCATIONS
help
Set the offset from the start of the nand where u-boot should be
loaded from.
-if SPL
+config SYS_NAND_U_BOOT_OFFS_REDUND
+ hex "Location in NAND to read U-Boot from"
+ default SYS_NAND_U_BOOT_OFFS
+ depends on SYS_NAND_U_BOOT_LOCATIONS
+ help
+ Set the offset from the start of the nand where the redundant u-boot
+ should be loaded from.
config SPL_NAND_DENALI
bool "Support Denali NAND controller for SPL"
diff --git a/drivers/mtd/nand/am335x_spl_bch.c b/drivers/mtd/nand/am335x_spl_bch.c
index f8770e0..a8a7a66 100644
--- a/drivers/mtd/nand/am335x_spl_bch.c
+++ b/drivers/mtd/nand/am335x_spl_bch.c
@@ -223,7 +223,7 @@ void nand_init(void)
/*
* Init board specific nand support
*/
- mtd = &nand_chip.mtd;
+ mtd = nand_to_mtd(&nand_chip);
nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
(void __iomem *)CONFIG_SYS_NAND_BASE;
board_nand_init(&nand_chip);
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
index ad5ded3..8669432 100644
--- a/drivers/mtd/nand/atmel_nand.c
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -1449,7 +1449,7 @@ int board_nand_init(struct nand_chip *nand)
void nand_init(void)
{
- mtd = &nand_chip.mtd;
+ mtd = nand_to_mtd(&nand_chip);
mtd->writesize = CONFIG_SYS_NAND_PAGE_SIZE;
mtd->oobsize = CONFIG_SYS_NAND_OOBSIZE;
nand_chip.IO_ADDR_R = (void __iomem *)CONFIG_SYS_NAND_BASE;
diff --git a/drivers/mtd/nand/lpc32xx_nand_mlc.c b/drivers/mtd/nand/lpc32xx_nand_mlc.c
index 4262029..a793115 100644
--- a/drivers/mtd/nand/lpc32xx_nand_mlc.c
+++ b/drivers/mtd/nand/lpc32xx_nand_mlc.c
@@ -541,7 +541,7 @@ static struct nand_chip lpc32xx_chip;
void board_nand_init(void)
{
- struct mtd_info *mtd = &lpc32xx_chip.mtd;
+ struct mtd_info *mtd = nand_to_mtd(&lpc32xx_chip);
int ret;
/* Set all BOARDSPECIFIC (actually core-specific) fields */
diff --git a/drivers/mtd/nand/mxs_nand_spl.c b/drivers/mtd/nand/mxs_nand_spl.c
index a8a3084..ff28df4 100644
--- a/drivers/mtd/nand/mxs_nand_spl.c
+++ b/drivers/mtd/nand/mxs_nand_spl.c
@@ -147,7 +147,7 @@ static int mxs_nand_init(void)
/* init mxs nand driver */
board_nand_init(&nand_chip);
- mtd = &nand_chip.mtd;
+ mtd = nand_to_mtd(&nand_chip);
/* set mtd functions */
nand_chip.cmdfunc = mxs_nand_command;
nand_chip.numchips = 1;
diff --git a/drivers/mtd/nand/nand_spl_simple.c b/drivers/mtd/nand/nand_spl_simple.c
index b023e00..60a7607 100644
--- a/drivers/mtd/nand/nand_spl_simple.c
+++ b/drivers/mtd/nand/nand_spl_simple.c
@@ -249,7 +249,7 @@ void nand_init(void)
/*
* Init board specific nand support
*/
- mtd = &nand_chip.mtd;
+ mtd = nand_to_mtd(&nand_chip);
nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W =
(void __iomem *)CONFIG_SYS_NAND_BASE;
board_nand_init(&nand_chip);
diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c
index 5bba66a..e8bcc34 100644
--- a/drivers/mtd/nand/nand_util.c
+++ b/drivers/mtd/nand/nand_util.c
@@ -820,7 +820,7 @@ int nand_torture(struct mtd_info *mtd, loff_t offset)
{
u_char patterns[] = {0xa5, 0x5a, 0x00};
struct erase_info instr = {
- .mtd = nand,
+ .mtd = mtd,
.addr = offset,
.len = mtd->erasesize,
};
diff --git a/drivers/mtd/nand/sunxi_nand_spl.c b/drivers/mtd/nand/sunxi_nand_spl.c
index b0e07aa..1ef7366 100644
--- a/drivers/mtd/nand/sunxi_nand_spl.c
+++ b/drivers/mtd/nand/sunxi_nand_spl.c
@@ -66,6 +66,8 @@
#define NFC_ROW_AUTO_INC (1 << 27)
#define NFC_SEND_CMD3 (1 << 28)
#define NFC_SEND_CMD4 (1 << 29)
+#define NFC_RAW_CMD (0 << 30)
+#define NFC_PAGE_CMD (2 << 30)
#define NFC_ST_CMD_INT_FLAG (1 << 1)
#define NFC_ST_DMA_INT_FLAG (1 << 2)
@@ -78,9 +80,6 @@
#define NFC_CMD_RNDOUT 0x05
#define NFC_CMD_READSTART 0x30
-
-#define NFC_PAGE_CMD (2 << 30)
-
#define SUNXI_DMA_CFG_REG0 0x300
#define SUNXI_DMA_SRC_START_ADDR_REG0 0x304
#define SUNXI_DMA_DEST_START_ADDRR_REG0 0x308
@@ -97,6 +96,16 @@
#define SUNXI_DMA_DDMA_PARA_REG_SRC_WAIT_CYC (0x0F << 0)
#define SUNXI_DMA_DDMA_PARA_REG_SRC_BLK_SIZE (0x7F << 8)
+struct nfc_config {
+ int page_size;
+ int ecc_strength;
+ int ecc_size;
+ int addr_cycles;
+ int nseeds;
+ bool randomize;
+ bool valid;
+};
+
/* minimal "boot0" style NAND support for Allwinner A20 */
/* random seed used by linux */
@@ -119,38 +128,31 @@ const uint16_t random_seed[128] = {
0x7c57, 0x0fbe, 0x46ce, 0x4939, 0x6b17, 0x37bb, 0x3e91, 0x76db,
};
-/* random seed used for syndrome calls */
-const uint16_t random_seed_syndrome = 0x4a80;
-
-#define MAX_RETRIES 10
+#define DEFAULT_TIMEOUT_US 100000
static int check_value_inner(int offset, int expected_bits,
- int max_number_of_retries, int negation)
+ int timeout_us, int negation)
{
- int retries = 0;
do {
int val = readl(offset) & expected_bits;
if (negation ? !val : val)
return 1;
- mdelay(1);
- retries++;
- } while (retries < max_number_of_retries);
+ udelay(1);
+ } while (--timeout_us);
return 0;
}
static inline int check_value(int offset, int expected_bits,
- int max_number_of_retries)
+ int timeout_us)
{
- return check_value_inner(offset, expected_bits,
- max_number_of_retries, 0);
+ return check_value_inner(offset, expected_bits, timeout_us, 0);
}
static inline int check_value_negated(int offset, int unexpected_bits,
- int max_number_of_retries)
+ int timeout_us)
{
- return check_value_inner(offset, unexpected_bits,
- max_number_of_retries, 1);
+ return check_value_inner(offset, unexpected_bits, timeout_us, 1);
}
void nand_init(void)
@@ -165,7 +167,7 @@ void nand_init(void)
SUNXI_NFC_BASE + NFC_CTL);
if (!check_value_negated(SUNXI_NFC_BASE + NFC_CTL,
- NFC_CTL_RESET, MAX_RETRIES)) {
+ NFC_CTL_RESET, DEFAULT_TIMEOUT_US)) {
printf("Couldn't initialize nand\n");
}
@@ -175,64 +177,97 @@ void nand_init(void)
SUNXI_NFC_BASE + NFC_CMD);
if (!check_value(SUNXI_NFC_BASE + NFC_ST, NFC_ST_CMD_INT_FLAG,
- MAX_RETRIES)) {
+ DEFAULT_TIMEOUT_US)) {
printf("Error timeout waiting for nand reset\n");
return;
}
writel(NFC_ST_CMD_INT_FLAG, SUNXI_NFC_BASE + NFC_ST);
}
-static int nand_read_page(int page_size, int ecc_strength, int ecc_page_size,
- int addr_cycles, uint32_t real_addr, dma_addr_t dst, int syndrome)
+static void nand_apply_config(const struct nfc_config *conf)
{
- uint32_t val;
- int i, ecc_off = 0;
- uint16_t ecc_mode = 0;
- uint16_t rand_seed;
- uint32_t page;
- uint16_t column;
- static const u8 strengths[] = { 16, 24, 28, 32, 40, 48, 56, 60, 64 };
-
- for (i = 0; i < ARRAY_SIZE(strengths); i++) {
- if (ecc_strength == strengths[i]) {
- ecc_mode = i;
- break;
- }
+ u32 val;
+
+ val = readl(SUNXI_NFC_BASE + NFC_CTL);
+ val &= ~NFC_CTL_PAGE_SIZE_MASK;
+ writel(val | NFC_CTL_RAM_METHOD | NFC_CTL_PAGE_SIZE(conf->page_size),
+ SUNXI_NFC_BASE + NFC_CTL);
+ writel(conf->ecc_size, SUNXI_NFC_BASE + NFC_CNT);
+ writel(conf->page_size, SUNXI_NFC_BASE + NFC_SPARE_AREA);
+}
+
+static int nand_load_page(const struct nfc_config *conf, u32 offs)
+{
+ int page = offs / conf->page_size;
+
+ writel((NFC_CMD_RNDOUTSTART << NFC_RANDOM_READ_CMD1_OFFSET) |
+ (NFC_CMD_RNDOUT << NFC_RANDOM_READ_CMD0_OFFSET) |
+ (NFC_CMD_READSTART << NFC_READ_CMD_OFFSET),
+ SUNXI_NFC_BASE + NFC_RCMD_SET);
+ writel(((page & 0xFFFF) << 16), SUNXI_NFC_BASE + NFC_ADDR_LOW);
+ writel((page >> 16) & 0xFF, SUNXI_NFC_BASE + NFC_ADDR_HIGH);
+ writel(NFC_ST_CMD_INT_FLAG, SUNXI_NFC_BASE + NFC_ST);
+ writel(NFC_SEND_CMD1 | NFC_SEND_CMD2 | NFC_RAW_CMD | NFC_WAIT_FLAG |
+ ((conf->addr_cycles - 1) << NFC_ADDR_NUM_OFFSET) | NFC_SEND_ADR,
+ SUNXI_NFC_BASE + NFC_CMD);
+
+ if (!check_value(SUNXI_NFC_BASE + NFC_ST, NFC_ST_CMD_INT_FLAG,
+ DEFAULT_TIMEOUT_US)) {
+ printf("Error while initializing dma interrupt\n");
+ return -EIO;
}
- /* HW ECC always request ECC bytes for 1024 bytes blocks */
- ecc_off = DIV_ROUND_UP(ecc_strength * fls(8 * 1024), 8);
- /* HW ECC always work with even numbers of ECC bytes */
- ecc_off += (ecc_off & 1);
- ecc_off += 4; /* prepad */
+ return 0;
+}
+
+static int nand_reset_column(void)
+{
+ writel((NFC_CMD_RNDOUTSTART << NFC_RANDOM_READ_CMD1_OFFSET) |
+ (NFC_CMD_RNDOUT << NFC_RANDOM_READ_CMD0_OFFSET) |
+ (NFC_CMD_RNDOUTSTART << NFC_READ_CMD_OFFSET),
+ SUNXI_NFC_BASE + NFC_RCMD_SET);
+ writel(0, SUNXI_NFC_BASE + NFC_ADDR_LOW);
+ writel(NFC_SEND_CMD1 | NFC_SEND_CMD2 | NFC_RAW_CMD |
+ (1 << NFC_ADDR_NUM_OFFSET) | NFC_SEND_ADR | NFC_CMD_RNDOUT,
+ SUNXI_NFC_BASE + NFC_CMD);
- page = real_addr / page_size;
- column = real_addr % page_size;
+ if (!check_value(SUNXI_NFC_BASE + NFC_ST, NFC_ST_CMD_INT_FLAG,
+ DEFAULT_TIMEOUT_US)) {
+ printf("Error while initializing dma interrupt\n");
+ return -1;
+ }
- if (syndrome)
- column += (column / ecc_page_size) * ecc_off;
+ return 0;
+}
+
+static int nand_read_page(const struct nfc_config *conf, u32 offs,
+ void *dest, int len)
+{
+ dma_addr_t dst = (dma_addr_t)dest;
+ int nsectors = len / conf->ecc_size;
+ u16 rand_seed;
+ u32 val;
+ int page;
+
+ page = offs / conf->page_size;
+
+ if (offs % conf->page_size || len % conf->ecc_size ||
+ len > conf->page_size || len < 0)
+ return -EINVAL;
/* clear ecc status */
writel(0, SUNXI_NFC_BASE + NFC_ECC_ST);
/* Choose correct seed */
- if (syndrome)
- rand_seed = random_seed_syndrome;
- else
- rand_seed = random_seed[page % 128];
+ rand_seed = random_seed[page % conf->nseeds];
- writel((rand_seed << 16) | NFC_ECC_RANDOM_EN | NFC_ECC_EN
- | NFC_ECC_PIPELINE | (ecc_mode << 12),
+ writel((rand_seed << 16) | (conf->ecc_strength << 12) |
+ (conf->randomize ? NFC_ECC_RANDOM_EN : 0) |
+ (conf->ecc_size == 512 ? NFC_ECC_BLOCK_SIZE : 0) |
+ NFC_ECC_EN | NFC_ECC_PIPELINE | NFC_ECC_EXCEPTION,
SUNXI_NFC_BASE + NFC_ECC_CTL);
- val = readl(SUNXI_NFC_BASE + NFC_CTL);
- writel(val | NFC_CTL_RAM_METHOD, SUNXI_NFC_BASE + NFC_CTL);
-
- if (!syndrome)
- writel(page_size + (column / ecc_page_size) * ecc_off,
- SUNXI_NFC_BASE + NFC_SPARE_AREA);
-
- flush_dcache_range(dst, ALIGN(dst + ecc_page_size, ARCH_DMA_MINALIGN));
+ flush_dcache_range(dst, ALIGN(dst + conf->ecc_size, ARCH_DMA_MINALIGN));
/* SUNXI_DMA */
writel(0x0, SUNXI_DMA_BASE + SUNXI_DMA_CFG_REG0); /* clr dma cmd */
@@ -241,158 +276,261 @@ static int nand_read_page(int page_size, int ecc_strength, int ecc_page_size,
SUNXI_DMA_BASE + SUNXI_DMA_SRC_START_ADDR_REG0);
/* read to RAM */
writel(dst, SUNXI_DMA_BASE + SUNXI_DMA_DEST_START_ADDRR_REG0);
- writel(SUNXI_DMA_DDMA_PARA_REG_SRC_WAIT_CYC
- | SUNXI_DMA_DDMA_PARA_REG_SRC_BLK_SIZE,
- SUNXI_DMA_BASE + SUNXI_DMA_DDMA_PARA_REG0);
- writel(ecc_page_size,
- SUNXI_DMA_BASE + SUNXI_DMA_DDMA_BC_REG0); /* 1kB */
- writel(SUNXI_DMA_DDMA_CFG_REG_LOADING
- | SUNXI_DMA_DDMA_CFG_REG_DMA_DEST_DATA_WIDTH_32
- | SUNXI_DMA_DDMA_CFG_REG_DDMA_DST_DRQ_TYPE_DRAM
- | SUNXI_DMA_DDMA_CFG_REG_DMA_SRC_DATA_WIDTH_32
- | SUNXI_DMA_DDMA_CFG_REG_DMA_SRC_ADDR_MODE_IO
- | SUNXI_DMA_DDMA_CFG_REG_DDMA_SRC_DRQ_TYPE_NFC,
- SUNXI_DMA_BASE + SUNXI_DMA_CFG_REG0);
-
- writel((NFC_CMD_RNDOUTSTART << NFC_RANDOM_READ_CMD1_OFFSET)
- | (NFC_CMD_RNDOUT << NFC_RANDOM_READ_CMD0_OFFSET)
- | (NFC_CMD_READSTART | NFC_READ_CMD_OFFSET), SUNXI_NFC_BASE
- + NFC_RCMD_SET);
- writel(1, SUNXI_NFC_BASE + NFC_SECTOR_NUM);
- writel(((page & 0xFFFF) << 16) | column,
- SUNXI_NFC_BASE + NFC_ADDR_LOW);
- writel((page >> 16) & 0xFF, SUNXI_NFC_BASE + NFC_ADDR_HIGH);
+ writel(SUNXI_DMA_DDMA_PARA_REG_SRC_WAIT_CYC |
+ SUNXI_DMA_DDMA_PARA_REG_SRC_BLK_SIZE,
+ SUNXI_DMA_BASE + SUNXI_DMA_DDMA_PARA_REG0);
+ writel(len, SUNXI_DMA_BASE + SUNXI_DMA_DDMA_BC_REG0);
+ writel(SUNXI_DMA_DDMA_CFG_REG_LOADING |
+ SUNXI_DMA_DDMA_CFG_REG_DMA_DEST_DATA_WIDTH_32 |
+ SUNXI_DMA_DDMA_CFG_REG_DDMA_DST_DRQ_TYPE_DRAM |
+ SUNXI_DMA_DDMA_CFG_REG_DMA_SRC_DATA_WIDTH_32 |
+ SUNXI_DMA_DDMA_CFG_REG_DMA_SRC_ADDR_MODE_IO |
+ SUNXI_DMA_DDMA_CFG_REG_DDMA_SRC_DRQ_TYPE_NFC,
+ SUNXI_DMA_BASE + SUNXI_DMA_CFG_REG0);
+
+ writel(nsectors, SUNXI_NFC_BASE + NFC_SECTOR_NUM);
writel(NFC_ST_DMA_INT_FLAG, SUNXI_NFC_BASE + NFC_ST);
- writel(NFC_SEND_CMD1 | NFC_SEND_CMD2 | NFC_DATA_TRANS |
- NFC_PAGE_CMD | NFC_WAIT_FLAG |
- ((addr_cycles - 1) << NFC_ADDR_NUM_OFFSET) |
- NFC_SEND_ADR | NFC_DATA_SWAP_METHOD | (syndrome ? NFC_SEQ : 0),
- SUNXI_NFC_BASE + NFC_CMD);
+ writel(NFC_DATA_TRANS | NFC_PAGE_CMD | NFC_DATA_SWAP_METHOD,
+ SUNXI_NFC_BASE + NFC_CMD);
if (!check_value(SUNXI_NFC_BASE + NFC_ST, NFC_ST_DMA_INT_FLAG,
- MAX_RETRIES)) {
+ DEFAULT_TIMEOUT_US)) {
printf("Error while initializing dma interrupt\n");
- return -1;
+ return -EIO;
}
writel(NFC_ST_DMA_INT_FLAG, SUNXI_NFC_BASE + NFC_ST);
if (!check_value_negated(SUNXI_DMA_BASE + SUNXI_DMA_CFG_REG0,
- SUNXI_DMA_DDMA_CFG_REG_LOADING, MAX_RETRIES)) {
+ SUNXI_DMA_DDMA_CFG_REG_LOADING,
+ DEFAULT_TIMEOUT_US)) {
printf("Error while waiting for dma transfer to finish\n");
- return -1;
+ return -EIO;
}
invalidate_dcache_range(dst,
- ALIGN(dst + ecc_page_size, ARCH_DMA_MINALIGN));
+ ALIGN(dst + conf->ecc_size, ARCH_DMA_MINALIGN));
- if (readl(SUNXI_NFC_BASE + NFC_ECC_ST))
- return -1;
+ val = readl(SUNXI_NFC_BASE + NFC_ECC_ST);
- return 0;
+ /* ECC error detected. */
+ if (val & 0xffff)
+ return -EIO;
+
+ /*
+ * Return 1 if the page is empty.
+ * We consider the page as empty if the first ECC block is marked
+ * empty.
+ */
+ return (val & 0x10000) ? 1 : 0;
}
-static int nand_read_ecc(int page_size, int ecc_strength, int ecc_page_size,
- int addr_cycles, uint32_t offs, uint32_t size, void *dest, int syndrome)
+static int nand_max_ecc_strength(struct nfc_config *conf)
{
- void *end = dest + size;
+ static const int ecc_bytes[] = { 32, 46, 54, 60, 74, 88, 102, 110, 116 };
+ int max_oobsize, max_ecc_bytes;
+ int nsectors = conf->page_size / conf->ecc_size;
+ int i;
+
+ /*
+ * ECC strength is limited by the size of the OOB area which is
+ * correlated with the page size.
+ */
+ switch (conf->page_size) {
+ case 2048:
+ max_oobsize = 64;
+ break;
+ case 4096:
+ max_oobsize = 256;
+ break;
+ case 8192:
+ max_oobsize = 640;
+ break;
+ case 16384:
+ max_oobsize = 1664;
+ break;
+ default:
+ return -EINVAL;
+ }
- clrsetbits_le32(SUNXI_NFC_BASE + NFC_CTL, NFC_CTL_PAGE_SIZE_MASK,
- NFC_CTL_PAGE_SIZE(page_size));
+ max_ecc_bytes = max_oobsize / nsectors;
- for ( ;dest < end; dest += ecc_page_size, offs += ecc_page_size) {
- if (nand_read_page(page_size, ecc_strength, ecc_page_size,
- addr_cycles, offs, (dma_addr_t)dest,
- syndrome))
- return -1;
+ for (i = 0; i < ARRAY_SIZE(ecc_bytes); i++) {
+ if (ecc_bytes[i] > max_ecc_bytes)
+ break;
}
- return 0;
+ if (!i)
+ return -EINVAL;
+
+ return i - 1;
}
-static int nand_read_buffer(uint32_t offs, unsigned int size, void *dest,
- int syndrome)
+static int nand_detect_ecc_config(struct nfc_config *conf, u32 offs,
+ void *dest)
{
- const struct {
- int page_size;
- int ecc_strength;
- int ecc_page_size;
- int addr_cycles;
- } nand_configs[] = {
- { 8192, 40, 1024, 5 },
- { 16384, 56, 1024, 5 },
- { 8192, 24, 1024, 5 },
- { 4096, 24, 1024, 5 },
- };
- static int nand_config = -1;
- int i;
+ /* NAND with pages > 4k will likely require 1k sector size. */
+ int min_ecc_size = conf->page_size > 4096 ? 1024 : 512;
+ int page = offs / conf->page_size;
+ int ret;
- if (nand_config == -1) {
- for (i = 0; i < ARRAY_SIZE(nand_configs); i++) {
- debug("nand: trying page %d ecc %d / %d addr %d: ",
- nand_configs[i].page_size,
- nand_configs[i].ecc_strength,
- nand_configs[i].ecc_page_size,
- nand_configs[i].addr_cycles);
- if (nand_read_ecc(nand_configs[i].page_size,
- nand_configs[i].ecc_strength,
- nand_configs[i].ecc_page_size,
- nand_configs[i].addr_cycles,
- offs, size, dest, syndrome) == 0) {
- debug("success\n");
- nand_config = i;
+ /*
+ * In most cases, 1k sectors are preferred over 512b ones, start
+ * testing this config first.
+ */
+ for (conf->ecc_size = 1024; conf->ecc_size >= min_ecc_size;
+ conf->ecc_size >>= 1) {
+ int max_ecc_strength = nand_max_ecc_strength(conf);
+
+ nand_apply_config(conf);
+
+ /*
+ * We are starting from the maximum ECC strength because
+ * most of the time NAND vendors provide an OOB area that
+ * barely meets the ECC requirements.
+ */
+ for (conf->ecc_strength = max_ecc_strength;
+ conf->ecc_strength >= 0;
+ conf->ecc_strength--) {
+ conf->randomize = false;
+ if (nand_reset_column())
+ return -EIO;
+
+ /*
+ * Only read the first sector to speedup detection.
+ */
+ ret = nand_read_page(conf, offs, dest, conf->ecc_size);
+ if (!ret) {
return 0;
+ } else if (ret > 0) {
+ /*
+ * If page is empty we can't deduce anything
+ * about the ECC config => stop the detection.
+ */
+ return -EINVAL;
}
- debug("failed\n");
+
+ conf->randomize = true;
+ conf->nseeds = ARRAY_SIZE(random_seed);
+ do {
+ if (nand_reset_column())
+ return -EIO;
+
+ if (!nand_read_page(conf, offs, dest,
+ conf->ecc_size))
+ return 0;
+
+ /*
+ * Find the next ->nseeds value that would
+ * change the randomizer seed for the page
+ * we're trying to read.
+ */
+ while (conf->nseeds >= 16) {
+ int seed = page % conf->nseeds;
+
+ conf->nseeds >>= 1;
+ if (seed != page % conf->nseeds)
+ break;
+ }
+ } while (conf->nseeds >= 16);
}
- return -1;
}
- return nand_read_ecc(nand_configs[nand_config].page_size,
- nand_configs[nand_config].ecc_strength,
- nand_configs[nand_config].ecc_page_size,
- nand_configs[nand_config].addr_cycles,
- offs, size, dest, syndrome);
+ return -EINVAL;
}
-int nand_spl_load_image(uint32_t offs, unsigned int size, void *dest)
+static int nand_detect_config(struct nfc_config *conf, u32 offs, void *dest)
{
-#if CONFIG_SYS_NAND_U_BOOT_OFFS == CONFIG_SPL_PAD_TO
- /*
- * u-boot-dtb.bin appended to SPL, use syndrome (like the BROM does)
- * and try different erase block sizes to find the backup.
- */
- const uint32_t boot_offsets[] = {
- 0 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS,
- 1 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS,
- 2 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS,
- 4 * 1024 * 1024 + CONFIG_SYS_NAND_U_BOOT_OFFS,
- };
- const int syndrome = 1;
-#else
+ if (conf->valid)
+ return 0;
+
/*
- * u-boot-dtb.bin on its own partition, do not use syndrome, u-boot
- * partition sits after 2 eraseblocks (spl, spl-backup), look for
- * backup u-boot 1 erase block further.
+ * Modern NANDs are more likely than legacy ones, so we start testing
+ * with 5 address cycles.
*/
- const uint32_t eraseblock_size = CONFIG_SYS_NAND_U_BOOT_OFFS / 2;
- const uint32_t boot_offsets[] = {
- CONFIG_SYS_NAND_U_BOOT_OFFS,
- CONFIG_SYS_NAND_U_BOOT_OFFS + eraseblock_size,
- };
- const int syndrome = 0;
-#endif
- int i;
-
- if (offs == CONFIG_SYS_NAND_U_BOOT_OFFS) {
- for (i = 0; i < ARRAY_SIZE(boot_offsets); i++) {
- if (nand_read_buffer(boot_offsets[i], size,
- dest, syndrome) == 0)
+ for (conf->addr_cycles = 5;
+ conf->addr_cycles >= 4;
+ conf->addr_cycles--) {
+ int max_page_size = conf->addr_cycles == 4 ? 2048 : 16384;
+
+ /*
+ * Ignoring 1k pages cause I'm not even sure this case exist
+ * in the real world.
+ */
+ for (conf->page_size = 2048; conf->page_size <= max_page_size;
+ conf->page_size <<= 1) {
+ if (nand_load_page(conf, offs))
+ return -1;
+
+ if (!nand_detect_ecc_config(conf, offs, dest)) {
+ conf->valid = true;
return 0;
+ }
}
- return -1;
}
- return nand_read_buffer(offs, size, dest, syndrome);
+ return -EINVAL;
+}
+
+static int nand_read_buffer(struct nfc_config *conf, uint32_t offs,
+ unsigned int size, void *dest)
+{
+ int first_seed, page, ret;
+
+ size = ALIGN(size, conf->page_size);
+ page = offs / conf->page_size;
+ first_seed = page % conf->nseeds;
+
+ for (; size; size -= conf->page_size) {
+ if (nand_load_page(conf, offs))
+ return -1;
+
+ ret = nand_read_page(conf, offs, dest, conf->page_size);
+ /*
+ * The ->nseeds value should be equal to the number of pages
+ * in an eraseblock. Since we don't know this information in
+ * advance we might have picked a wrong value.
+ */
+ if (ret < 0 && conf->randomize) {
+ int cur_seed = page % conf->nseeds;
+
+ /*
+ * We already tried all the seed values => we are
+ * facing a real corruption.
+ */
+ if (cur_seed < first_seed)
+ return -EIO;
+
+ /* Try to adjust ->nseeds and read the page again... */
+ conf->nseeds = cur_seed;
+
+ if (nand_reset_column())
+ return -EIO;
+
+ /* ... it still fails => it's a real corruption. */
+ if (nand_read_page(conf, offs, dest, conf->page_size))
+ return -EIO;
+ } else if (ret && conf->randomize) {
+ memset(dest, 0xff, conf->page_size);
+ }
+
+ page++;
+ offs += conf->page_size;
+ dest += conf->page_size;
+ }
+
+ return 0;
+}
+
+int nand_spl_load_image(uint32_t offs, unsigned int size, void *dest)
+{
+ static struct nfc_config conf = { };
+ int ret;
+
+ ret = nand_detect_config(&conf, offs, dest);
+ if (ret)
+ return ret;
+
+ return nand_read_buffer(&conf, offs, size, dest);
}
void nand_deselect(void)
generated by cgit v1.1 at 2024-11-30 15:57:01 +0000