diff options
50 files changed, 1716 insertions, 334 deletions
diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 9a5a974..8f85862 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -120,8 +120,8 @@ endif ifdef CONFIG_ARM64 OBJCOPYFLAGS += -j .text -j .rodata -j .data -j .u_boot_list -j .rela.dyn else -OBJCOPYFLAGS += -j .text -j .secure_text -j .rodata -j .hash -j .data -j \ - .got -j .got.plt -j .u_boot_list -j .rel.dyn +OBJCOPYFLAGS += -j .text -j .secure_text -j .secure_data -j .rodata -j .hash \ + -j .data -j .got -j .got.plt -j .u_boot_list -j .rel.dyn endif ifdef CONFIG_OF_EMBED diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index ddd8d12..0d4bfbc 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -19,7 +19,7 @@ endif endif obj-$(CONFIG_ARMV7_NONSEC) += nonsec_virt.o virt-v7.o virt-dt.o -obj-$(CONFIG_ARMV7_PSCI) += psci.o +obj-$(CONFIG_ARMV7_PSCI) += psci.o psci-common.o obj-$(CONFIG_IPROC) += iproc-common/ obj-$(CONFIG_KONA) += kona-common/ diff --git a/arch/arm/cpu/armv7/ls102xa/psci.S b/arch/arm/cpu/armv7/ls102xa/psci.S index cf5cd48..f9b26b4 100644 --- a/arch/arm/cpu/armv7/ls102xa/psci.S +++ b/arch/arm/cpu/armv7/ls102xa/psci.S @@ -29,16 +29,16 @@ @ r2 = target PC .globl psci_cpu_on psci_cpu_on: - push {lr} + push {r4, r5, r6, lr} @ Clear and Get the correct CPU number @ r1 = 0xf01 - and r1, r1, #0xff + and r4, r1, #0xff - mov r0, r1 - bl psci_get_cpu_stack_top - str r2, [r0] - dsb + mov r0, r4 + mov r1, r2 + bl psci_save_target_pc + mov r1, r4 @ Get DCFG base address movw r4, #(CONFIG_SYS_FSL_GUTS_ADDR & 0xffff) @@ -101,7 +101,7 @@ holdoff_release: @ Return mov r0, #ARM_PSCI_RET_SUCCESS - pop {lr} + pop {r4, r5, r6, lr} bx lr .globl psci_cpu_off @@ -111,16 +111,4 @@ psci_cpu_off: 1: wfi b 1b -.globl psci_arch_init -psci_arch_init: - mov r6, lr - - bl psci_get_cpu_id - bl psci_get_cpu_stack_top - mov sp, r0 - - bx r6 - - .globl psci_text_end -psci_text_end: .popsection diff --git a/arch/arm/cpu/armv7/mx7/psci-mx7.c b/arch/arm/cpu/armv7/mx7/psci-mx7.c index 9a33047..502552d 100644 --- a/arch/arm/cpu/armv7/mx7/psci-mx7.c +++ b/arch/arm/cpu/armv7/mx7/psci-mx7.c @@ -1,9 +1,9 @@ #include <asm/io.h> #include <asm/psci.h> +#include <asm/secure.h> #include <asm/arch/imx-regs.h> #include <common.h> -#define __secure __attribute__((section("._secure.text"))) #define GPC_CPU_PGC_SW_PDN_REQ 0xfc #define GPC_CPU_PGC_SW_PUP_REQ 0xf0 diff --git a/arch/arm/cpu/armv7/mx7/psci.S b/arch/arm/cpu/armv7/mx7/psci.S index 34c6ab3..96e88d6 100644 --- a/arch/arm/cpu/armv7/mx7/psci.S +++ b/arch/arm/cpu/armv7/mx7/psci.S @@ -9,35 +9,22 @@ .arch_extension sec - @ r1 = target CPU - @ r2 = target PC - -.globl psci_arch_init -psci_arch_init: - mov r6, lr - - bl psci_get_cpu_id - bl psci_get_cpu_stack_top - mov sp, r0 - - bx r6 - - @ r1 = target CPU - @ r2 = target PC - .globl psci_cpu_on psci_cpu_on: - push {lr} + push {r4, r5, lr} + mov r4, r0 + mov r5, r1 mov r0, r1 - bl psci_get_cpu_stack_top - str r2, [r0] - dsb + mov r1, r2 + bl psci_save_target_pc + mov r0, r4 + mov r1, r5 ldr r2, =psci_cpu_entry bl imx_cpu_on - pop {pc} + pop {r4, r5, pc} .globl psci_cpu_off psci_cpu_off: @@ -49,6 +36,4 @@ psci_cpu_off: 1: wfi b 1b - .globl psci_text_end -psci_text_end: .popsection diff --git a/arch/arm/cpu/armv7/nonsec_virt.S b/arch/arm/cpu/armv7/nonsec_virt.S index b7563ed..95ce938 100644 --- a/arch/arm/cpu/armv7/nonsec_virt.S +++ b/arch/arm/cpu/armv7/nonsec_virt.S @@ -49,8 +49,13 @@ _secure_monitor: mcr p15, 0, r5, c12, c0, 1 isb - @ Obtain a secure stack, and configure the PSCI backend + @ Obtain a secure stack + bl psci_stack_setup + + @ Configure the PSCI backend + push {r0, r1, r2, ip} bl psci_arch_init + pop {r0, r1, r2, ip} #endif #ifdef CONFIG_ARM_ERRATA_773022 diff --git a/arch/arm/cpu/armv7/psci-common.c b/arch/arm/cpu/armv7/psci-common.c new file mode 100644 index 0000000..d14b693 --- /dev/null +++ b/arch/arm/cpu/armv7/psci-common.c @@ -0,0 +1,39 @@ +/* + * Common PSCI functions + * + * Copyright (C) 2016 Chen-Yu Tsai + * Author: Chen-Yu Tsai <wens@csie.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <config.h> +#include <asm/armv7.h> +#include <asm/macro.h> +#include <asm/psci.h> +#include <asm/secure.h> +#include <linux/linkage.h> + +static u32 psci_target_pc[CONFIG_ARMV7_PSCI_NR_CPUS] __secure_data = { 0 }; + +void __secure psci_save_target_pc(int cpu, u32 pc) +{ + psci_target_pc[cpu] = pc; + DSB; +} + +u32 __secure psci_get_target_pc(int cpu) +{ + return psci_target_pc[cpu]; +} + diff --git a/arch/arm/cpu/armv7/psci.S b/arch/arm/cpu/armv7/psci.S index ab40837..350b75c 100644 --- a/arch/arm/cpu/armv7/psci.S +++ b/arch/arm/cpu/armv7/psci.S @@ -196,29 +196,56 @@ ENTRY(psci_cpu_off_common) bx lr ENDPROC(psci_cpu_off_common) -@ expects CPU ID in r0 and returns stack top in r0 -ENTRY(psci_get_cpu_stack_top) - mov r3, #0x400 @ 1kB of stack per CPU - mul r0, r0, r3 - - ldr r3, =psci_text_end @ end of monitor text - add r3, r3, #0x2000 @ Skip two pages - lsr r3, r3, #12 @ Align to start of page - lsl r3, r3, #12 - sub r3, r3, #4 @ reserve 1 word for target PC - sub r0, r3, r0 @ here's our stack! - +@ The stacks are allocated in reverse order, i.e. +@ the stack for CPU0 has the highest memory address. +@ +@ -------------------- __secure_stack_end +@ | CPU0 target PC | +@ |------------------| +@ | | +@ | CPU0 stack | +@ | | +@ |------------------| __secure_stack_end - 1KB +@ | . | +@ | . | +@ | . | +@ | . | +@ -------------------- __secure_stack_start +@ +@ This expects CPU ID in r0 and returns stack top in r0 +LENTRY(psci_get_cpu_stack_top) + @ stack top = __secure_stack_end - (cpuid << ARM_PSCI_STACK_SHIFT) + ldr r3, =__secure_stack_end + sub r0, r3, r0, LSL #ARM_PSCI_STACK_SHIFT + sub r0, r0, #4 @ Save space for target PC bx lr ENDPROC(psci_get_cpu_stack_top) +@ {r0, r1, r2, ip} from _do_nonsec_entry(kernel_entry, 0, machid, r2) in +@ arch/arm/lib/bootm.c:boot_jump_linux() must remain unchanged across +@ this function. +ENTRY(psci_stack_setup) + mov r6, lr + mov r7, r0 + bl psci_get_cpu_id @ CPU ID => r0 + bl psci_get_cpu_stack_top @ stack top => r0 + mov sp, r0 + mov r0, r7 + bx r6 +ENDPROC(psci_stack_setup) + +ENTRY(psci_arch_init) + mov pc, lr +ENDPROC(psci_arch_init) +.weak psci_arch_init + ENTRY(psci_cpu_entry) bl psci_enable_smp bl _nonsec_init bl psci_get_cpu_id @ CPU ID => r0 - bl psci_get_cpu_stack_top @ stack top => r0 - ldr r0, [r0] @ target PC at stack top + bl psci_get_target_pc @ target PC => r0 b _do_nonsec_entry ENDPROC(psci_cpu_entry) diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile index c208510..b35b9df 100644 --- a/arch/arm/cpu/armv7/sunxi/Makefile +++ b/arch/arm/cpu/armv7/sunxi/Makefile @@ -14,7 +14,6 @@ obj-$(CONFIG_MACH_SUN8I_H3) += tzpc.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_ARMV7_PSCI) += psci.o -obj-$(CONFIG_ARMV7_PSCI) += psci_head.o endif ifdef CONFIG_SPL_BUILD diff --git a/arch/arm/cpu/armv7/sunxi/psci.c b/arch/arm/cpu/armv7/sunxi/psci.c index a118e9d..7ac8406 100644 --- a/arch/arm/cpu/armv7/sunxi/psci.c +++ b/arch/arm/cpu/armv7/sunxi/psci.c @@ -17,11 +17,11 @@ #include <asm/gic.h> #include <asm/io.h> #include <asm/psci.h> +#include <asm/secure.h> #include <asm/system.h> #include <linux/bitops.h> -#define __secure __attribute__ ((section ("._secure.text"))) #define __irq __attribute__ ((interrupt ("IRQ"))) #define GICD_BASE (SUNXI_GIC400_BASE + GIC_DIST_OFFSET) @@ -209,9 +209,8 @@ int __secure psci_cpu_on(u32 __always_unused unused, u32 mpidr, u32 pc) (struct sunxi_cpucfg_reg *)SUNXI_CPUCFG_BASE; u32 cpu = (mpidr & 0x3); - /* store target PC at target CPU stack top */ - writel(pc, psci_get_cpu_stack_top(cpu)); - DSB; + /* store target PC */ + psci_save_target_pc(cpu, pc); /* Set secondary core power on PC */ writel((u32)&psci_cpu_entry, &cpucfg->priv0); @@ -250,7 +249,7 @@ void __secure psci_cpu_off(void) wfi(); } -void __secure sunxi_gic_init(void) +void __secure psci_arch_init(void) { u32 reg; diff --git a/arch/arm/cpu/armv7/sunxi/psci_head.S b/arch/arm/cpu/armv7/sunxi/psci_head.S deleted file mode 100644 index 8fa823d..0000000 --- a/arch/arm/cpu/armv7/sunxi/psci_head.S +++ /dev/null @@ -1,66 +0,0 @@ -/* - * Copyright (C) 2013 - ARM Ltd - * Author: Marc Zyngier <marc.zyngier@arm.com> - * - * Based on code by Carl van Schaik <carl@ok-labs.com>. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <config.h> -#include <linux/linkage.h> - -#include <asm/arch-armv7/generictimer.h> -#include <asm/gic.h> -#include <asm/macro.h> -#include <asm/psci.h> -#include <asm/arch/cpu.h> - -/* - * Memory layout: - * - * SECURE_RAM to text_end : - * ._secure_text section - * text_end to ALIGN_PAGE(text_end): - * nothing - * ALIGN_PAGE(text_end) to ALIGN_PAGE(text_end) + 0x1000) - * 1kB of stack per CPU (4 CPUs max). - */ - - .pushsection ._secure.text, "ax" - - .arch_extension sec - -#define GICD_BASE (SUNXI_GIC400_BASE + 0x1000) -#define GICC_BASE (SUNXI_GIC400_BASE + 0x2000) - -@ {r0, r1, r2, ip} from _do_nonsec_entry(kernel_entry, 0, machid, r2) in -@ arch/arm/lib/bootm.c:boot_jump_linux() must remain unchanged across -@ this function. -ENTRY(psci_arch_init) - mov r6, lr - mov r7, r0 - bl psci_get_cpu_id @ CPU ID => r0 - bl psci_get_cpu_stack_top @ stack top => r0 - sub r0, r0, #4 @ Save space for target PC - mov sp, r0 - mov r0, r7 - mov lr, r6 - - push {r0, r1, r2, ip, lr} - bl sunxi_gic_init - pop {r0, r1, r2, ip, pc} -ENDPROC(psci_arch_init) - -ENTRY(psci_text_end) - .popsection diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds index 1769b6e..36c9fd0 100644 --- a/arch/arm/cpu/u-boot.lds +++ b/arch/arm/cpu/u-boot.lds @@ -8,6 +8,7 @@ */ #include <config.h> +#include <asm/psci.h> OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") OUTPUT_ARCH(arm) @@ -48,34 +49,67 @@ SECTIONS #ifdef CONFIG_ARMV7_NONSEC + /* Align the secure section only if we're going to use it in situ */ + .__secure_start : +#ifndef CONFIG_ARMV7_SECURE_BASE + ALIGN(CONSTANT(COMMONPAGESIZE)) +#endif + { + KEEP(*(.__secure_start)) + } + #ifndef CONFIG_ARMV7_SECURE_BASE #define CONFIG_ARMV7_SECURE_BASE #define __ARMV7_PSCI_STACK_IN_RAM #endif - .__secure_start : { - . = ALIGN(0x1000); - *(.__secure_start) - } - .secure_text CONFIG_ARMV7_SECURE_BASE : AT(ADDR(.__secure_start) + SIZEOF(.__secure_start)) { *(._secure.text) } - . = LOADADDR(.__secure_start) + - SIZEOF(.__secure_start) + - SIZEOF(.secure_text); + .secure_data : AT(LOADADDR(.secure_text) + SIZEOF(.secure_text)) + { + *(._secure.data) + } + .secure_stack ALIGN(ADDR(.secure_data) + SIZEOF(.secure_data), + CONSTANT(COMMONPAGESIZE)) (NOLOAD) : #ifdef __ARMV7_PSCI_STACK_IN_RAM - /* Align to page boundary and skip 2 pages */ - . = (. & ~ 0xfff) + 0x2000; -#undef __ARMV7_PSCI_STACK_IN_RAM + AT(ADDR(.secure_stack)) +#else + AT(LOADADDR(.secure_data) + SIZEOF(.secure_data)) +#endif + { + KEEP(*(.__secure_stack_start)) + + /* Skip addreses for stack */ + . = . + CONFIG_ARMV7_PSCI_NR_CPUS * ARM_PSCI_STACK_SIZE; + + /* Align end of stack section to page boundary */ + . = ALIGN(CONSTANT(COMMONPAGESIZE)); + + KEEP(*(.__secure_stack_end)) + +#ifdef CONFIG_ARMV7_SECURE_MAX_SIZE + /* + * We are not checking (__secure_end - __secure_start) here, + * as these are the load addresses, and do not include the + * stack section. Instead, use the end of the stack section + * and the start of the text section. + */ + ASSERT((. - ADDR(.secure_text)) <= CONFIG_ARMV7_SECURE_MAX_SIZE, + "Error: secure section exceeds secure memory size"); +#endif + } + +#ifndef __ARMV7_PSCI_STACK_IN_RAM + /* Reset VMA but don't allocate space if we have secure SRAM */ + . = LOADADDR(.secure_stack); #endif - __secure_end_lma = .; - .__secure_end : AT(__secure_end_lma) { + .__secure_end : AT(ADDR(.__secure_end)) { *(.__secure_end) LONG(0x1d1071c); /* Must output something to reset LMA */ } diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index ef573ec..acecb7c 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -242,6 +242,7 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \ sun8i-a83t-sinovoip-bpi-m3.dtb dtb-$(CONFIG_MACH_SUN8I_H3) += \ sun8i-h3-orangepi-2.dtb \ + sun8i-h3-orangepi-lite.dtb \ sun8i-h3-orangepi-one.dtb \ sun8i-h3-orangepi-pc.dtb \ sun8i-h3-orangepi-plus.dtb diff --git a/arch/arm/dts/sun50i-a64-pine64-plus.dts b/arch/arm/dts/sun50i-a64-pine64-plus.dts index 549dc15..389c609 100644 --- a/arch/arm/dts/sun50i-a64-pine64-plus.dts +++ b/arch/arm/dts/sun50i-a64-pine64-plus.dts @@ -57,3 +57,16 @@ reg = <0x40000000 0x40000000>; }; }; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + diff --git a/arch/arm/dts/sun50i-a64.dtsi b/arch/arm/dts/sun50i-a64.dtsi index 1bd436f..7d0dc76 100644 --- a/arch/arm/dts/sun50i-a64.dtsi +++ b/arch/arm/dts/sun50i-a64.dtsi @@ -506,6 +506,25 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + rmii_pins: rmii_pins { + allwinner,pins = "PD10", "PD11", "PD13", "PD14", + "PD17", "PD18", "PD19", "PD20", + "PD22", "PD23"; + allwinner,function = "emac"; + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + rgmii_pins: rgmii_pins { + allwinner,pins = "PD8", "PD9", "PD10", "PD11", + "PD12", "PD13", "PD15", + "PD16", "PD17", "PD18", "PD19", + "PD20", "PD21", "PD22", "PD23"; + allwinner,function = "emac"; + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; ahb_rst: reset@1c202c0 { @@ -620,5 +639,19 @@ #address-cells = <1>; #size-cells = <0>; }; + + emac: ethernet@01c30000 { + compatible = "allwinner,sun50i-a64-emac"; + reg = <0x01c30000 0x2000>, <0x01c00030 0x4>; + reg-names = "emac", "syscon"; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ahb_rst 17>; + reset-names = "ahb"; + clocks = <&bus_gates 17>; + clock-names = "ahb"; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; }; }; diff --git a/arch/arm/dts/sun8i-h3-orangepi-2.dts b/arch/arm/dts/sun8i-h3-orangepi-2.dts index f93f5d1..d3f8f55 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-2.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-2.dts @@ -184,3 +184,16 @@ usb1_vbus-supply = <®_usb1_vbus>; status = "okay"; }; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy = <&phy1>; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + diff --git a/arch/arm/dts/sun8i-h3-orangepi-lite.dts b/arch/arm/dts/sun8i-h3-orangepi-lite.dts new file mode 100644 index 0000000..ac71749 --- /dev/null +++ b/arch/arm/dts/sun8i-h3-orangepi-lite.dts @@ -0,0 +1,178 @@ +/* + * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun8i-h3.dtsi" +#include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Xunlong Orange Pi Lite"; + compatible = "xunlong,orangepi-lite", "allwinner,sun8i-h3"; + + aliases { + /* The H3 emac is not used so the wifi is ethernet0 */ + ethernet1 = &rtl8189ftv; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&leds_opc>, <&leds_r_opc>; + + pwr_led { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status_led { + label = "orangepi:red:status"; + gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; + }; + }; + + r_gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&sw_r_opc>; + + sw4 { + label = "sw4"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ + cd-inverted; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + non-removable; + status = "okay"; + + /* + * Explicitly define the sdio device, so that we can add an ethernet + * alias for it (which e.g. makes u-boot set a mac-address). + */ + rtl8189ftv: sdio_wifi@1 { + reg = <1>; + }; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&pio { + leds_opc: led_pins@0 { + allwinner,pins = "PA15"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&r_pio { + leds_r_opc: led_pins@0 { + allwinner,pins = "PL10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + + sw_r_opc: key_pins@0 { + allwinner,pins = "PL3"; + allwinner,function = "gpio_in"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&usbphy { + /* USB VBUS is always on */ + status = "okay"; +}; diff --git a/arch/arm/dts/sun8i-h3-orangepi-pc.dts b/arch/arm/dts/sun8i-h3-orangepi-pc.dts index 30ccca0..0a74a91 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-pc.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-pc.dts @@ -173,3 +173,15 @@ /* USB VBUS is always on */ status = "okay"; }; + +&emac { + phy = <&phy1>; + phy-mode = "mii"; + allwinner,use-internal-phy; + allwinner,leds-active-low; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; diff --git a/arch/arm/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/dts/sun8i-h3-orangepi-plus.dts index 900ec4f..28f74f6 100644 --- a/arch/arm/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/dts/sun8i-h3-orangepi-plus.dts @@ -40,26 +40,13 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -/dts-v1/; -#include "sun8i-h3.dtsi" -#include "sunxi-common-regulators.dtsi" - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/input/input.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> +/* The Orange Pi Plus is an extended version of the Orange Pi 2 */ +#include "sun8i-h3-orangepi-2.dts" / { - model = "Xunlong Orange Pi Plus"; + model = "Xunlong Orange Pi Plus / Plus 2 / Plus 2E"; compatible = "xunlong,orangepi-plus", "allwinner,sun8i-h3"; - aliases { - serial0 = &uart0; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - reg_usb3_vbus: usb3-vbus { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -71,75 +58,42 @@ enable-active-high; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; }; +}; - leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_opc>; - - status_led { - label = "status:red:user"; - gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; - }; - }; - - r_leds { - compatible = "gpio-leds"; - pinctrl-names = "default"; - pinctrl-0 = <&leds_r_opc>; - - tx { - label = "pwr:green:user"; - gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; - default-state = "on"; - }; - }; - - r_gpio_keys { - compatible = "gpio-keys"; - input-name = "sw4"; - - pinctrl-names = "default"; - pinctrl-0 = <&sw_r_opc>; +&ehci2 { + status = "okay"; +}; - sw4@0 { - label = "sw4"; - linux,code = <BTN_0>; - gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; - }; - }; +&ehci3 { + status = "okay"; }; -&pio { - leds_opc: led_pins@0 { - allwinner,pins = "PA15"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_8bit_pins>; + vmmc-supply = <®_vcc3v3>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; }; -&r_pio { - leds_r_opc: led_pins@0 { - allwinner,pins = "PL10"; - allwinner,function = "gpio_out"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; +&mmc2_8bit_pins { + /* Increase drive strength for DDR modes */ + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + /* eMMC is missing pull-ups */ + allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; +}; - sw_r_opc: key_pins@0 { - allwinner,pins = "PL03"; - allwinner,function = "gpio_in"; - allwinner,drive = <SUN4I_PINCTRL_10_MA>; - allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; - }; +&ohci1 { + status = "okay"; }; -&ehci1 { +&ohci2 { status = "okay"; }; -&ehci3 { +&ohci3 { status = "okay"; }; @@ -152,33 +106,6 @@ }; }; -&mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; - vmmc-supply = <®_vcc3v3>; - bus-width = <4>; - cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */ - cd-inverted; - status = "okay"; -}; - -®_usb1_vbus { - gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; - status = "okay"; -}; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&uart0_pins_a>; - status = "okay"; -}; - -&usb1_vbus_pin_a { - allwinner,pins = "PG13"; -}; - &usbphy { - usb1_vbus-supply = <®_usb1_vbus>; usb3_vbus-supply = <®_usb3_vbus>; - status = "okay"; }; diff --git a/arch/arm/dts/sun8i-h3.dtsi b/arch/arm/dts/sun8i-h3.dtsi index c2f63c5..72c0920 100644 --- a/arch/arm/dts/sun8i-h3.dtsi +++ b/arch/arm/dts/sun8i-h3.dtsi @@ -501,6 +501,17 @@ interrupt-controller; #interrupt-cells = <3>; + rgmii_pins: rgmii_pins { + allwinner,pins = "PD0", "PD1", "PD2", "PD3", + "PD4", "PD5", "PD7", + "PD8", "PD9", "PD10", + "PD12", "PD13", "PD15", + "PD16", "PD17"; + allwinner,function = "emac"; + allwinner,drive = <SUN4I_PINCTRL_40_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; + uart0_pins_a: uart0@0 { allwinner,pins = "PA4", "PA5"; allwinner,function = "uart0"; @@ -530,6 +541,16 @@ allwinner,drive = <SUN4I_PINCTRL_30_MA>; allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; }; + + mmc2_8bit_pins: mmc2_8bit { + allwinner,pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15", "PC16"; + allwinner,function = "mmc2"; + allwinner,drive = <SUN4I_PINCTRL_30_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; ahb_rst: reset@01c202c0 { @@ -616,6 +637,20 @@ status = "disabled"; }; + emac: ethernet@01c30000 { + compatible = "allwinner,sun8i-h3-emac"; + reg = <0x01c30000 0x2000>, <0x01c00030 0x4>; + reg-names = "emac", "syscon"; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + resets = <&ahb_rst 17>, <&ahb_rst 66>; + reset-names = "ahb", "ephy"; + clocks = <&bus_gates 17>, <&bus_gates 128>; + clock-names = "ahb", "ephy"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + gic: interrupt-controller@01c81000 { compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; reg = <0x01c81000 0x1000>, diff --git a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h index c2e72f5..d4dff1e 100644 --- a/arch/arm/include/asm/arch-sunxi/clock_sun6i.h +++ b/arch/arm/include/asm/arch-sunxi/clock_sun6i.h @@ -40,7 +40,8 @@ struct sunxi_ccm_reg { u32 ahb_gate1; /* 0x64 ahb module clock gating 1 */ u32 apb1_gate; /* 0x68 apb1 module clock gating */ u32 apb2_gate; /* 0x6c apb2 module clock gating */ - u32 reserved9[4]; + u32 bus_gate4; /* 0x70 gate 4 module clock gating */ + u8 res3[0xc]; u32 nand0_clk_cfg; /* 0x80 nand0 clock control */ u32 nand1_clk_cfg; /* 0x84 nand1 clock control */ u32 sd0_clk_cfg; /* 0x88 sd0 clock control */ @@ -387,6 +388,7 @@ struct sunxi_ccm_reg { #define AHB_RESET_OFFSET_LCD0 4 /* ahb_reset2 offsets */ +#define AHB_RESET_OFFSET_EPHY 2 #define AHB_RESET_OFFSET_LVDS 0 /* apb2 reset */ diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h index c5e9d88..cd009d7 100644 --- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h +++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h @@ -87,7 +87,8 @@ #define SUNXI_KEYPAD_BASE 0x01c23000 #define SUNXI_TZPC_BASE 0x01c23400 -#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3) +#if defined(CONFIG_MACH_SUN8I_A83T) || defined(CONFIG_MACH_SUN8I_H3) || \ +defined(CONFIG_MACH_SUN50I) /* SID address space starts at 0x01c1400, but e-fuse is at offset 0x200 */ #define SUNXI_SID_BASE 0x01c14200 #else diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h index 1ace548..bff7d14 100644 --- a/arch/arm/include/asm/arch-sunxi/gpio.h +++ b/arch/arm/include/asm/arch-sunxi/gpio.h @@ -141,6 +141,7 @@ enum sunxi_gpio_number { /* GPIO pin function config */ #define SUNXI_GPIO_INPUT 0 #define SUNXI_GPIO_OUTPUT 1 +#define SUNXI_GPIO_DISABLE 7 #define SUNXI_GPA_EMAC 2 #define SUN6I_GPA_GMAC 2 @@ -162,8 +163,10 @@ enum sunxi_gpio_number { #define SUN50I_GPB_UART0 4 #define SUNXI_GPC_NAND 2 +#define SUNXI_GPC_SPI0 3 #define SUNXI_GPC_SDC2 3 #define SUN6I_GPC_SDC3 4 +#define SUN50I_GPC_SPI0 4 #define SUN8I_GPD_SDC1 3 #define SUNXI_GPD_LCD0 2 diff --git a/arch/arm/include/asm/arch-sunxi/mmc.h b/arch/arm/include/asm/arch-sunxi/mmc.h index 3da360b..cb52e64 100644 --- a/arch/arm/include/asm/arch-sunxi/mmc.h +++ b/arch/arm/include/asm/arch-sunxi/mmc.h @@ -127,5 +127,4 @@ struct sunxi_mmc { #define SUNXI_MMC_COMMON_RESET (1 << 18) struct mmc *sunxi_mmc_init(int sdc_no); -int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc); #endif /* _SUNXI_MMC_H */ diff --git a/arch/arm/include/asm/arch-sunxi/spl.h b/arch/arm/include/asm/arch-sunxi/spl.h index ec73379..5d7ab55 100644 --- a/arch/arm/include/asm/arch-sunxi/spl.h +++ b/arch/arm/include/asm/arch-sunxi/spl.h @@ -51,7 +51,14 @@ struct boot_file_head { uint8_t spl_signature[4]; }; uint32_t fel_script_address; - uint32_t reserved1[3]; + /* + * If the fel_uEnv_length member below is set to a non-zero value, + * it specifies the size (byte count) of data at fel_script_address. + * At the same time this indicates that the data is in uEnv.txt + * compatible format, ready to be imported via "env import -t". + */ + uint32_t fel_uEnv_length; + uint32_t reserved1[2]; uint32_t boot_media; /* written here by the boot ROM */ uint32_t reserved2[5]; /* padding, align to 64 bytes */ }; diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h index 423fc70..a20702e 100644 --- a/arch/arm/include/asm/armv7.h +++ b/arch/arm/include/asm/armv7.h @@ -126,6 +126,8 @@ void _smp_pen(void); extern char __secure_start[]; extern char __secure_end[]; +extern char __secure_stack_start[]; +extern char __secure_stack_end[]; #endif /* CONFIG_ARMV7_NONSEC */ diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h index bc5edda..7ba7ce3 100644 --- a/arch/arm/include/asm/psci.h +++ b/arch/arm/include/asm/psci.h @@ -47,12 +47,19 @@ #define ARM_PSCI_0_2_FN_SYSTEM_OFF ARM_PSCI_0_2_FN(8) #define ARM_PSCI_0_2_FN_SYSTEM_RESET ARM_PSCI_0_2_FN(9) +/* 1KB stack per core */ +#define ARM_PSCI_STACK_SHIFT 10 +#define ARM_PSCI_STACK_SIZE (1 << ARM_PSCI_STACK_SHIFT) + #ifndef __ASSEMBLY__ #include <asm/types.h> +/* These 2 helper functions assume cpu < CONFIG_ARMV7_PSCI_NR_CPUS */ +u32 psci_get_target_pc(int cpu); +void psci_save_target_pc(int cpu, u32 pc); + void psci_cpu_entry(void); u32 psci_get_cpu_id(void); -u32 psci_get_cpu_stack_top(int cpu); void psci_cpu_off_common(void); int psci_update_dt(void *fdt); diff --git a/arch/arm/include/asm/secure.h b/arch/arm/include/asm/secure.h index effdb18..5a403bc 100644 --- a/arch/arm/include/asm/secure.h +++ b/arch/arm/include/asm/secure.h @@ -3,6 +3,9 @@ #include <config.h> +#define __secure __attribute__ ((section ("._secure.text"))) +#define __secure_data __attribute__ ((section ("._secure.data"))) + #ifdef CONFIG_ARMV7_SECURE_BASE /* * Warning, horror ahead. diff --git a/arch/arm/lib/sections.c b/arch/arm/lib/sections.c index 6a94522..952e8ae 100644 --- a/arch/arm/lib/sections.c +++ b/arch/arm/lib/sections.c @@ -27,6 +27,8 @@ char __rel_dyn_start[0] __attribute__((section(".__rel_dyn_start"))); char __rel_dyn_end[0] __attribute__((section(".__rel_dyn_end"))); char __secure_start[0] __attribute__((section(".__secure_start"))); char __secure_end[0] __attribute__((section(".__secure_end"))); +char __secure_stack_start[0] __attribute__((section(".__secure_stack_start"))); +char __secure_stack_end[0] __attribute__((section(".__secure_stack_end"))); char __efi_runtime_start[0] __attribute__((section(".__efi_runtime_start"))); char __efi_runtime_stop[0] __attribute__((section(".__efi_runtime_stop"))); char __efi_runtime_rel_start[0] __attribute__((section(".__efi_runtime_rel_start"))); diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c index 66e028e..06a1986 100644 --- a/arch/arm/mach-sunxi/board.c +++ b/arch/arm/mach-sunxi/board.c @@ -203,7 +203,8 @@ DECLARE_GLOBAL_DATA_PTR; */ u32 spl_boot_device(void) { - __maybe_unused struct mmc *mmc0, *mmc1; + int boot_source; + /* * When booting from the SD card or NAND memory, the "eGON.BT0" * signature is expected to be found in memory at the address 0x0004 @@ -223,27 +224,19 @@ u32 spl_boot_device(void) if (!is_boot0_magic(SPL_ADDR + 4)) /* eGON.BT0 */ return BOOT_DEVICE_BOARD; - /* The BROM will try to boot from mmc0 first, so try that first. */ -#ifdef CONFIG_MMC - mmc_initialize(gd->bd); - mmc0 = find_mmc_device(0); - if (sunxi_mmc_has_egon_boot_signature(mmc0)) + boot_source = readb(SPL_ADDR + 0x28); + switch (boot_source) { + case SUNXI_BOOTED_FROM_MMC0: return BOOT_DEVICE_MMC1; -#endif - - /* Fallback to booting NAND if enabled. */ - if (IS_ENABLED(CONFIG_SPL_NAND_SUPPORT)) + case SUNXI_BOOTED_FROM_NAND: return BOOT_DEVICE_NAND; - -#ifdef CONFIG_MMC - if (CONFIG_MMC_SUNXI_SLOT_EXTRA == 2) { - mmc1 = find_mmc_device(1); - if (sunxi_mmc_has_egon_boot_signature(mmc1)) - return BOOT_DEVICE_MMC2; + case SUNXI_BOOTED_FROM_MMC2: + return BOOT_DEVICE_MMC2; + case SUNXI_BOOTED_FROM_SPI: + return BOOT_DEVICE_SPI; } -#endif - panic("Could not determine boot source\n"); + panic("Unknown boot source %d\n", boot_source); return -1; /* Never reached */ } diff --git a/arch/arm/mach-tegra/psci.S b/arch/arm/mach-tegra/psci.S index b836da1..645d08f 100644 --- a/arch/arm/mach-tegra/psci.S +++ b/arch/arm/mach-tegra/psci.S @@ -61,9 +61,6 @@ ENTRY(psci_arch_init) ldrne r7, [r5] mcrne p15, 0, r7, c14, c0, 0 @ write CNTFRQ to CPU1..3 - bl psci_get_cpu_stack_top @ stack top => r0 - mov sp, r0 - bx r6 ENDPROC(psci_arch_init) @@ -88,12 +85,13 @@ _loop: wfi ENDPROC(psci_cpu_off) ENTRY(psci_cpu_on) - push {lr} + push {r4, r5, r6, lr} + mov r4, r1 mov r0, r1 - bl psci_get_cpu_stack_top @ get stack top of target CPU - str r2, [r0] @ store target PC at stack top - dsb + mov r1, r2 + bl psci_save_target_pc @ store target PC + mov r1, r4 ldr r6, =TEGRA_RESET_EXCEPTION_VECTOR ldr r5, =psci_cpu_entry @@ -106,9 +104,7 @@ ENTRY(psci_cpu_on) str r5, [r6, r2] mov r0, #ARM_PSCI_RET_SUCCESS @ Return PSCI_RET_SUCCESS - pop {pc} + pop {r4, r5, r6, pc} ENDPROC(psci_cpu_on) - .globl psci_text_end -psci_text_end: .popsection diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index d2dfebe..0dc84f6 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -56,6 +56,7 @@ F: configs/ga10h_v1_1_defconfig F: configs/gt90h_v4_defconfig F: configs/inet86dz_defconfig F: configs/orangepi_2_defconfig +F: configs/orangepi_lite_defconfig F: configs/orangepi_one_defconfig F: configs/orangepi_pc_defconfig F: configs/orangepi_plus_defconfig diff --git a/board/sunxi/board.c b/board/sunxi/board.c index c8bf316..f6e28b0 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -20,12 +20,15 @@ #include <asm/arch/dram.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/spl.h> #include <asm/arch/usb_phy.h> #ifndef CONFIG_ARM64 #include <asm/armv7.h> #endif #include <asm/gpio.h> #include <asm/io.h> +#include <environment.h> +#include <libfdt.h> #include <nand.h> #include <net.h> #include <sy8106a.h> @@ -366,8 +369,7 @@ int board_mmc_init(bd_t *bis) * are searched there first. Note we only do this for u-boot proper, * not for the SPL, see spl_boot_device(). */ - if (!sunxi_mmc_has_egon_boot_signature(mmc0) && - sunxi_mmc_has_egon_boot_signature(mmc1)) { + if (readb(SPL_ADDR + 0x28) == SUNXI_BOOTED_FROM_MMC2) { /* Booting from emmc / mmc2, swap */ mmc0->block_dev.devnum = 1; mmc1->block_dev.devnum = 0; @@ -571,9 +573,6 @@ void get_board_serial(struct tag_serialnr *serialnr) } #endif -#if !defined(CONFIG_SPL_BUILD) -#include <asm/arch/spl.h> - /* * Check the SPL header for the "sunxi" variant. If found: parse values * that might have been passed by the loader ("fel" utility), and update @@ -582,50 +581,67 @@ void get_board_serial(struct tag_serialnr *serialnr) static void parse_spl_header(const uint32_t spl_addr) { struct boot_file_head *spl = (void *)(ulong)spl_addr; - if (memcmp(spl->spl_signature, SPL_SIGNATURE, 3) == 0) { - uint8_t spl_header_version = spl->spl_signature[3]; - if (spl_header_version == SPL_HEADER_VERSION) { - if (spl->fel_script_address) - setenv_hex("fel_scriptaddr", - spl->fel_script_address); - return; - } + if (memcmp(spl->spl_signature, SPL_SIGNATURE, 3) != 0) + return; /* signature mismatch, no usable header */ + + uint8_t spl_header_version = spl->spl_signature[3]; + if (spl_header_version != SPL_HEADER_VERSION) { printf("sunxi SPL version mismatch: expected %u, got %u\n", SPL_HEADER_VERSION, spl_header_version); + return; } + if (!spl->fel_script_address) + return; + + if (spl->fel_uEnv_length != 0) { + /* + * data is expected in uEnv.txt compatible format, so "env + * import -t" the string(s) at fel_script_address right away. + */ + himport_r(&env_htab, (char *)spl->fel_script_address, + spl->fel_uEnv_length, '\n', H_NOCLEAR, 0, 0, NULL); + return; + } + /* otherwise assume .scr format (mkimage-type script) */ + setenv_hex("fel_scriptaddr", spl->fel_script_address); } -#endif -#ifdef CONFIG_MISC_INIT_R -int misc_init_r(void) +/* + * Note this function gets called multiple times. + * It must not make any changes to env variables which already exist. + */ +static void setup_environment(const void *fdt) { char serial_string[17] = { 0 }; unsigned int sid[4]; uint8_t mac_addr[6]; - int ret; - -#if !defined(CONFIG_SPL_BUILD) - setenv("fel_booted", NULL); - setenv("fel_scriptaddr", NULL); - /* determine if we are running in FEL mode */ - if (!is_boot0_magic(SPL_ADDR + 4)) { /* eGON.BT0 */ - setenv("fel_booted", "1"); - parse_spl_header(SPL_ADDR); - } -#endif + char ethaddr[16]; + int i, ret; ret = sunxi_get_sid(sid); if (ret == 0 && sid[0] != 0 && sid[3] != 0) { - if (!getenv("ethaddr")) { + for (i = 0; i < 4; i++) { + sprintf(ethaddr, "ethernet%d", i); + if (!fdt_get_alias(fdt, ethaddr)) + continue; + + if (i == 0) + strcpy(ethaddr, "ethaddr"); + else + sprintf(ethaddr, "eth%daddr", i); + + if (getenv(ethaddr)) + continue; + /* Non OUI / registered MAC address */ - mac_addr[0] = 0x02; + mac_addr[0] = (i << 4) | 0x02; mac_addr[1] = (sid[0] >> 0) & 0xff; mac_addr[2] = (sid[3] >> 24) & 0xff; mac_addr[3] = (sid[3] >> 16) & 0xff; mac_addr[4] = (sid[3] >> 8) & 0xff; mac_addr[5] = (sid[3] >> 0) & 0xff; - eth_setenv_enetaddr("ethaddr", mac_addr); + eth_setenv_enetaddr(ethaddr, mac_addr); } if (!getenv("serial#")) { @@ -635,6 +651,21 @@ int misc_init_r(void) setenv("serial#", serial_string); } } +} + +int misc_init_r(void) +{ + __maybe_unused int ret; + + setenv("fel_booted", NULL); + setenv("fel_scriptaddr", NULL); + /* determine if we are running in FEL mode */ + if (!is_boot0_magic(SPL_ADDR + 4)) { /* eGON.BT0 */ + setenv("fel_booted", "1"); + parse_spl_header(SPL_ADDR); + } + + setup_environment(gd->fdt_blob); #ifndef CONFIG_MACH_SUN9I ret = sunxi_usb_phy_probe(); @@ -645,12 +676,17 @@ int misc_init_r(void) return 0; } -#endif int ft_board_setup(void *blob, bd_t *bd) { int __maybe_unused r; + /* + * Call setup_environment again in case the boot fdt has + * ethernet aliases the u-boot copy does not have. + */ + setup_environment(blob); + #ifdef CONFIG_VIDEO_DT_SIMPLEFB r = sunxi_simplefb_setup(blob); if (r) diff --git a/common/spl/spl.c b/common/spl/spl.c index 12aed02..14320fe 100644 --- a/common/spl/spl.c +++ b/common/spl/spl.c @@ -270,7 +270,7 @@ struct boot_device_name boot_name_table[] = { #ifdef CONFIG_SPL_YMODEM_SUPPORT { BOOT_DEVICE_UART, "UART" }, #endif -#ifdef CONFIG_SPL_SPI_SUPPORT +#if defined(CONFIG_SPL_SPI_SUPPORT) || defined(CONFIG_SPL_SPI_FLASH_SUPPORT) { BOOT_DEVICE_SPI, "SPI" }, #endif #ifdef CONFIG_SPL_ETH_SUPPORT @@ -346,7 +346,7 @@ static int spl_load_image(u32 boot_device) case BOOT_DEVICE_UART: return spl_ymodem_load_image(); #endif -#ifdef CONFIG_SPL_SPI_SUPPORT +#if defined(CONFIG_SPL_SPI_SUPPORT) || defined(CONFIG_SPL_SPI_FLASH_SUPPORT) case BOOT_DEVICE_SPI: return spl_spi_load_image(); #endif diff --git a/configs/orangepi_lite_defconfig b/configs/orangepi_lite_defconfig new file mode 100644 index 0000000..417e4f6 --- /dev/null +++ b/configs/orangepi_lite_defconfig @@ -0,0 +1,15 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_MACH_SUN8I_H3=y +CONFIG_DRAM_CLK=672 +CONFIG_DRAM_ZQ=3881979 +CONFIG_DRAM_ODT_EN=y +CONFIG_MMC0_CD_PIN="PF6" +# CONFIG_VIDEO is not set +CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-lite" +# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set +CONFIG_SPL=y +# CONFIG_CMD_IMLS is not set +# CONFIG_CMD_FLASH is not set +# CONFIG_CMD_FPGA is not set +CONFIG_USB_EHCI_HCD=y diff --git a/configs/orangepi_pc_defconfig b/configs/orangepi_pc_defconfig index 7eaa795..43ec927 100644 --- a/configs/orangepi_pc_defconfig +++ b/configs/orangepi_pc_defconfig @@ -4,6 +4,8 @@ CONFIG_MACH_SUN8I_H3=y CONFIG_DRAM_CLK=624 CONFIG_DRAM_ZQ=3881979 CONFIG_DRAM_ODT_EN=y +CONFIG_MMC0_CD_PIN="PF6" +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 # CONFIG_VIDEO is not set CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-orangepi-pc" # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set @@ -13,3 +15,4 @@ CONFIG_SPL=y # CONFIG_CMD_FPGA is not set CONFIG_SY8106A_POWER=y CONFIG_USB_EHCI_HCD=y +CONFIG_SUN8I_EMAC=y diff --git a/configs/pine64_plus_defconfig b/configs/pine64_plus_defconfig index 0bf79bf..5c97de1 100644 --- a/configs/pine64_plus_defconfig +++ b/configs/pine64_plus_defconfig @@ -10,3 +10,4 @@ CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-pine64-plus" # CONFIG_CMD_FLASH is not set # CONFIG_CMD_FPGA is not set CONFIG_ENABLE_ARM_SOC_BOOT0_HOOK=y +CONFIG_SUN8I_EMAC=y diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c index ce2dc4a..5d8abdc 100644 --- a/drivers/mmc/sunxi_mmc.c +++ b/drivers/mmc/sunxi_mmc.c @@ -269,18 +269,18 @@ static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data) unsigned i; unsigned *buff = (unsigned int *)(reading ? data->dest : data->src); unsigned byte_cnt = data->blocksize * data->blocks; - unsigned timeout_msecs = byte_cnt >> 8; - if (timeout_msecs < 2000) - timeout_msecs = 2000; + unsigned timeout_usecs = (byte_cnt >> 8) * 1000; + if (timeout_usecs < 2000000) + timeout_usecs = 2000000; /* Always read / write data through the CPU */ setbits_le32(&mmchost->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB); for (i = 0; i < (byte_cnt >> 2); i++) { while (readl(&mmchost->reg->status) & status_bit) { - if (!timeout_msecs--) + if (!timeout_usecs--) return -1; - udelay(1000); + udelay(1); } if (reading) @@ -445,23 +445,6 @@ static int sunxi_mmc_getcd(struct mmc *mmc) return !gpio_get_value(cd_pin); } -int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc) -{ - char *buf = malloc(512); - int valid_signature = 0; - - if (buf == NULL) - panic("Failed to allocate memory\n"); - - if (mmc_getcd(mmc) && mmc_init(mmc) == 0 && - mmc->block_dev.block_read(&mmc->block_dev, 16, 1, buf) == 1 && - strncmp(&buf[4], "eGON.BT0", 8) == 0) - valid_signature = 1; - - free(buf); - return valid_signature; -} - static const struct mmc_ops sunxi_mmc_ops = { .send_cmd = sunxi_mmc_send_cmd, .set_ios = sunxi_mmc_set_ios, diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig index 3f7433c..1f23c8e 100644 --- a/drivers/mtd/spi/Kconfig +++ b/drivers/mtd/spi/Kconfig @@ -128,4 +128,16 @@ config SPI_FLASH_MTD If unsure, say N +if SPL + +config SPL_SPI_SUNXI + bool "Support for SPI Flash on Allwinner SoCs in SPL" + depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I_H3 || MACH_SUN50I + ---help--- + Enable support for SPI Flash. This option allows SPL to read from + sunxi SPI Flash. It uses the same method as the boot ROM, so does + not need any extra configuration. + +endif + endmenu # menu "SPI Flash Support" diff --git a/drivers/mtd/spi/Makefile b/drivers/mtd/spi/Makefile index c665836..6f47a66 100644 --- a/drivers/mtd/spi/Makefile +++ b/drivers/mtd/spi/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_DM_SPI_FLASH) += sf-uclass.o ifdef CONFIG_SPL_BUILD obj-$(CONFIG_SPL_SPI_LOAD) += spi_spl_load.o obj-$(CONFIG_SPL_SPI_BOOT) += fsl_espi_spl.o +obj-$(CONFIG_SPL_SPI_SUNXI) += sunxi_spi_spl.o endif obj-$(CONFIG_SPI_FLASH) += sf_probe.o spi_flash.o sf_params.o sf.o diff --git a/drivers/mtd/spi/sunxi_spi_spl.c b/drivers/mtd/spi/sunxi_spi_spl.c new file mode 100644 index 0000000..e3ded5b --- /dev/null +++ b/drivers/mtd/spi/sunxi_spi_spl.c @@ -0,0 +1,283 @@ +/* + * Copyright (C) 2016 Siarhei Siamashka <siarhei.siamashka@gmail.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <spl.h> +#include <asm/gpio.h> +#include <asm/io.h> + +#ifdef CONFIG_SPL_OS_BOOT +#error CONFIG_SPL_OS_BOOT is not supported yet +#endif + +/* + * This is a very simple U-Boot image loading implementation, trying to + * replicate what the boot ROM is doing when loading the SPL. Because we + * know the exact pins where the SPI Flash is connected and also know + * that the Read Data Bytes (03h) command is supported, the hardware + * configuration is very simple and we don't need the extra flexibility + * of the SPI framework. Moreover, we rely on the default settings of + * the SPI controler hardware registers and only adjust what needs to + * be changed. This is good for the code size and this implementation + * adds less than 400 bytes to the SPL. + * + * There are two variants of the SPI controller in Allwinner SoCs: + * A10/A13/A20 (sun4i variant) and everything else (sun6i variant). + * Both of them are supported. + * + * The pin mixing part is SoC specific and only A10/A13/A20/H3/A64 are + * supported at the moment. + */ + +/*****************************************************************************/ +/* SUN4I variant of the SPI controller */ +/*****************************************************************************/ + +#define SUN4I_SPI0_CCTL (0x01C05000 + 0x1C) +#define SUN4I_SPI0_CTL (0x01C05000 + 0x08) +#define SUN4I_SPI0_RX (0x01C05000 + 0x00) +#define SUN4I_SPI0_TX (0x01C05000 + 0x04) +#define SUN4I_SPI0_FIFO_STA (0x01C05000 + 0x28) +#define SUN4I_SPI0_BC (0x01C05000 + 0x20) +#define SUN4I_SPI0_TC (0x01C05000 + 0x24) + +#define SUN4I_CTL_ENABLE BIT(0) +#define SUN4I_CTL_MASTER BIT(1) +#define SUN4I_CTL_TF_RST BIT(8) +#define SUN4I_CTL_RF_RST BIT(9) +#define SUN4I_CTL_XCH BIT(10) + +/*****************************************************************************/ +/* SUN6I variant of the SPI controller */ +/*****************************************************************************/ + +#define SUN6I_SPI0_CCTL (0x01C68000 + 0x24) +#define SUN6I_SPI0_GCR (0x01C68000 + 0x04) +#define SUN6I_SPI0_TCR (0x01C68000 + 0x08) +#define SUN6I_SPI0_FIFO_STA (0x01C68000 + 0x1C) +#define SUN6I_SPI0_MBC (0x01C68000 + 0x30) +#define SUN6I_SPI0_MTC (0x01C68000 + 0x34) +#define SUN6I_SPI0_BCC (0x01C68000 + 0x38) +#define SUN6I_SPI0_TXD (0x01C68000 + 0x200) +#define SUN6I_SPI0_RXD (0x01C68000 + 0x300) + +#define SUN6I_CTL_ENABLE BIT(0) +#define SUN6I_CTL_MASTER BIT(1) +#define SUN6I_CTL_SRST BIT(31) +#define SUN6I_TCR_XCH BIT(31) + +/*****************************************************************************/ + +#define CCM_AHB_GATING0 (0x01C20000 + 0x60) +#define CCM_SPI0_CLK (0x01C20000 + 0xA0) +#define SUN6I_BUS_SOFT_RST_REG0 (0x01C20000 + 0x2C0) + +#define AHB_RESET_SPI0_SHIFT 20 +#define AHB_GATE_OFFSET_SPI0 20 + +#define SPI0_CLK_DIV_BY_2 0x1000 +#define SPI0_CLK_DIV_BY_4 0x1001 + +/*****************************************************************************/ + +/* + * Allwinner A10/A20 SoCs were using pins PC0,PC1,PC2,PC23 for booting + * from SPI Flash, everything else is using pins PC0,PC1,PC2,PC3. + */ +static void spi0_pinmux_setup(unsigned int pin_function) +{ + unsigned int pin; + + for (pin = SUNXI_GPC(0); pin <= SUNXI_GPC(2); pin++) + sunxi_gpio_set_cfgpin(pin, pin_function); + + if (IS_ENABLED(CONFIG_MACH_SUN4I) || IS_ENABLED(CONFIG_MACH_SUN7I)) + sunxi_gpio_set_cfgpin(SUNXI_GPC(23), pin_function); + else + sunxi_gpio_set_cfgpin(SUNXI_GPC(3), pin_function); +} + +/* + * Setup 6 MHz from OSC24M (because the BROM is doing the same). + */ +static void spi0_enable_clock(void) +{ + /* Deassert SPI0 reset on SUN6I */ + if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) + setbits_le32(SUN6I_BUS_SOFT_RST_REG0, + (1 << AHB_RESET_SPI0_SHIFT)); + + /* Open the SPI0 gate */ + setbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0)); + + /* Divide by 4 */ + writel(SPI0_CLK_DIV_BY_4, IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I) ? + SUN6I_SPI0_CCTL : SUN4I_SPI0_CCTL); + /* 24MHz from OSC24M */ + writel((1 << 31), CCM_SPI0_CLK); + + if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) { + /* Enable SPI in the master mode and do a soft reset */ + setbits_le32(SUN6I_SPI0_GCR, SUN6I_CTL_MASTER | + SUN6I_CTL_ENABLE | + SUN6I_CTL_SRST); + /* Wait for completion */ + while (readl(SUN6I_SPI0_GCR) & SUN6I_CTL_SRST) + ; + } else { + /* Enable SPI in the master mode and reset FIFO */ + setbits_le32(SUN4I_SPI0_CTL, SUN4I_CTL_MASTER | + SUN4I_CTL_ENABLE | + SUN4I_CTL_TF_RST | + SUN4I_CTL_RF_RST); + } +} + +static void spi0_disable_clock(void) +{ + /* Disable the SPI0 controller */ + if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) + clrbits_le32(SUN6I_SPI0_GCR, SUN6I_CTL_MASTER | + SUN6I_CTL_ENABLE); + else + clrbits_le32(SUN4I_SPI0_CTL, SUN4I_CTL_MASTER | + SUN4I_CTL_ENABLE); + + /* Disable the SPI0 clock */ + writel(0, CCM_SPI0_CLK); + + /* Close the SPI0 gate */ + clrbits_le32(CCM_AHB_GATING0, (1 << AHB_GATE_OFFSET_SPI0)); + + /* Assert SPI0 reset on SUN6I */ + if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) + clrbits_le32(SUN6I_BUS_SOFT_RST_REG0, + (1 << AHB_RESET_SPI0_SHIFT)); +} + +static int spi0_init(void) +{ + unsigned int pin_function = SUNXI_GPC_SPI0; + if (IS_ENABLED(CONFIG_MACH_SUN50I)) + pin_function = SUN50I_GPC_SPI0; + + spi0_pinmux_setup(pin_function); + spi0_enable_clock(); +} + +static void spi0_deinit(void) +{ + /* New SoCs can disable pins, older could only set them as input */ + unsigned int pin_function = SUNXI_GPIO_INPUT; + if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) + pin_function = SUNXI_GPIO_DISABLE; + + spi0_disable_clock(); + spi0_pinmux_setup(pin_function); +} + +/*****************************************************************************/ + +#define SPI_READ_MAX_SIZE 60 /* FIFO size, minus 4 bytes of the header */ + +static void sunxi_spi0_read_data(u8 *buf, u32 addr, u32 bufsize, + u32 spi_ctl_reg, + u32 spi_ctl_xch_bitmask, + u32 spi_fifo_reg, + u32 spi_tx_reg, + u32 spi_rx_reg, + u32 spi_bc_reg, + u32 spi_tc_reg, + u32 spi_bcc_reg) +{ + writel(4 + bufsize, spi_bc_reg); /* Burst counter (total bytes) */ + writel(4, spi_tc_reg); /* Transfer counter (bytes to send) */ + if (spi_bcc_reg) + writel(4, spi_bcc_reg); /* SUN6I also needs this */ + + /* Send the Read Data Bytes (03h) command header */ + writeb(0x03, spi_tx_reg); + writeb((u8)(addr >> 16), spi_tx_reg); + writeb((u8)(addr >> 8), spi_tx_reg); + writeb((u8)(addr), spi_tx_reg); + + /* Start the data transfer */ + setbits_le32(spi_ctl_reg, spi_ctl_xch_bitmask); + + /* Wait until everything is received in the RX FIFO */ + while ((readl(spi_fifo_reg) & 0x7F) < 4 + bufsize) + ; + + /* Skip 4 bytes */ + readl(spi_rx_reg); + + /* Read the data */ + while (bufsize-- > 0) + *buf++ = readb(spi_rx_reg); + + /* tSHSL time is up to 100 ns in various SPI flash datasheets */ + udelay(1); +} + +static void spi0_read_data(void *buf, u32 addr, u32 len) +{ + u8 *buf8 = buf; + u32 chunk_len; + + while (len > 0) { + chunk_len = len; + if (chunk_len > SPI_READ_MAX_SIZE) + chunk_len = SPI_READ_MAX_SIZE; + + if (IS_ENABLED(CONFIG_SUNXI_GEN_SUN6I)) { + sunxi_spi0_read_data(buf8, addr, chunk_len, + SUN6I_SPI0_TCR, + SUN6I_TCR_XCH, + SUN6I_SPI0_FIFO_STA, + SUN6I_SPI0_TXD, + SUN6I_SPI0_RXD, + SUN6I_SPI0_MBC, + SUN6I_SPI0_MTC, + SUN6I_SPI0_BCC); + } else { + sunxi_spi0_read_data(buf8, addr, chunk_len, + SUN4I_SPI0_CTL, + SUN4I_CTL_XCH, + SUN4I_SPI0_FIFO_STA, + SUN4I_SPI0_TX, + SUN4I_SPI0_RX, + SUN4I_SPI0_BC, + SUN4I_SPI0_TC, + 0); + } + + len -= chunk_len; + buf8 += chunk_len; + addr += chunk_len; + } +} + +/*****************************************************************************/ + +int spl_spi_load_image(void) +{ + int err; + struct image_header *header; + header = (struct image_header *)(CONFIG_SYS_TEXT_BASE); + + spi0_init(); + + spi0_read_data((void *)header, CONFIG_SYS_SPI_U_BOOT_OFFS, 0x40); + err = spl_parse_image_header(header); + if (err) + return err; + + spi0_read_data((void *)spl_image.load_addr, CONFIG_SYS_SPI_U_BOOT_OFFS, + spl_image.size); + + spi0_deinit(); + return 0; +} diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index c1cb689..88d8e83 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -152,6 +152,15 @@ config RTL8169 This driver supports Realtek 8169 series gigabit ethernet family of PCI/PCIe chipsets/adapters. +config SUN8I_EMAC + bool "Allwinner Sun8i Ethernet MAC support" + depends on DM_ETH + select PHYLIB + help + This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC. + It can be found in H3/A64/A83T based SoCs and compatible with both + External and Internal PHY's. + config XILINX_AXIEMAC depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) select PHYLIB diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 5702592..a448526 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -24,6 +24,7 @@ obj-$(CONFIG_E1000) += e1000.o obj-$(CONFIG_E1000_SPI) += e1000_spi.o obj-$(CONFIG_EEPRO100) += eepro100.o obj-$(CONFIG_SUNXI_EMAC) += sunxi_emac.o +obj-$(CONFIG_SUN8I_EMAC) += sun8i_emac.o obj-$(CONFIG_ENC28J60) += enc28j60.o obj-$(CONFIG_EP93XX) += ep93xx_eth.o obj-$(CONFIG_ETHOC) += ethoc.o diff --git a/drivers/net/sun8i_emac.c b/drivers/net/sun8i_emac.c new file mode 100644 index 0000000..4bed50d --- /dev/null +++ b/drivers/net/sun8i_emac.c @@ -0,0 +1,789 @@ +/* + * (C) Copyright 2016 + * Author: Amit Singh Tomar, amittomer25@gmail.com + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Ethernet driver for H3/A64/A83T based SoC's + * + * It is derived from the work done by + * LABBE Corentin & Chen-Yu Tsai for Linux, THANKS! + * +*/ + +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <common.h> +#include <dm.h> +#include <fdt_support.h> +#include <linux/err.h> +#include <malloc.h> +#include <miiphy.h> +#include <net.h> + +#define SCTL_EMAC_TX_CLK_SRC_MII BIT(0) +#define SCTL_EMAC_EPIT_MII BIT(2) +#define SCTL_EMAC_CLK_SEL BIT(18) /* 25 Mhz */ + +#define MDIO_CMD_MII_BUSY BIT(0) +#define MDIO_CMD_MII_WRITE BIT(1) + +#define MDIO_CMD_MII_PHY_REG_ADDR_MASK 0x000001f0 +#define MDIO_CMD_MII_PHY_REG_ADDR_SHIFT 4 +#define MDIO_CMD_MII_PHY_ADDR_MASK 0x0001f000 +#define MDIO_CMD_MII_PHY_ADDR_SHIFT 12 + +#define CONFIG_TX_DESCR_NUM 32 +#define CONFIG_RX_DESCR_NUM 32 +#define CONFIG_ETH_BUFSIZE 2024 + +#define TX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_TX_DESCR_NUM) +#define RX_TOTAL_BUFSIZE (CONFIG_ETH_BUFSIZE * CONFIG_RX_DESCR_NUM) + +#define H3_EPHY_DEFAULT_VALUE 0x58000 +#define H3_EPHY_DEFAULT_MASK GENMASK(31, 15) +#define H3_EPHY_ADDR_SHIFT 20 +#define REG_PHY_ADDR_MASK GENMASK(4, 0) +#define H3_EPHY_LED_POL BIT(17) /* 1: active low, 0: active high */ +#define H3_EPHY_SHUTDOWN BIT(16) /* 1: shutdown, 0: power up */ +#define H3_EPHY_SELECT BIT(15) /* 1: internal PHY, 0: external PHY */ + +#define SC_RMII_EN BIT(13) +#define SC_EPIT BIT(2) /* 1: RGMII, 0: MII */ +#define SC_ETCS_MASK GENMASK(1, 0) +#define SC_ETCS_EXT_GMII 0x1 +#define SC_ETCS_INT_GMII 0x2 + +#define CONFIG_MDIO_TIMEOUT (3 * CONFIG_SYS_HZ) + +#define AHB_GATE_OFFSET_EPHY 0 + +#if defined(CONFIG_MACH_SUN8I_H3) +#define SUN8I_GPD8_GMAC 2 +#else +#define SUN8I_GPD8_GMAC 4 +#endif + +/* H3/A64 EMAC Register's offset */ +#define EMAC_CTL0 0x00 +#define EMAC_CTL1 0x04 +#define EMAC_INT_STA 0x08 +#define EMAC_INT_EN 0x0c +#define EMAC_TX_CTL0 0x10 +#define EMAC_TX_CTL1 0x14 +#define EMAC_TX_FLOW_CTL 0x1c +#define EMAC_TX_DMA_DESC 0x20 +#define EMAC_RX_CTL0 0x24 +#define EMAC_RX_CTL1 0x28 +#define EMAC_RX_DMA_DESC 0x34 +#define EMAC_MII_CMD 0x48 +#define EMAC_MII_DATA 0x4c +#define EMAC_ADDR0_HIGH 0x50 +#define EMAC_ADDR0_LOW 0x54 +#define EMAC_TX_DMA_STA 0xb0 +#define EMAC_TX_CUR_DESC 0xb4 +#define EMAC_TX_CUR_BUF 0xb8 +#define EMAC_RX_DMA_STA 0xc0 +#define EMAC_RX_CUR_DESC 0xc4 + +DECLARE_GLOBAL_DATA_PTR; + +enum emac_variant { + A83T_EMAC = 1, + H3_EMAC, + A64_EMAC, +}; + +struct emac_dma_desc { + u32 status; + u32 st; + u32 buf_addr; + u32 next; +} __aligned(ARCH_DMA_MINALIGN); + +struct emac_eth_dev { + struct emac_dma_desc rx_chain[CONFIG_TX_DESCR_NUM]; + struct emac_dma_desc tx_chain[CONFIG_RX_DESCR_NUM]; + char rxbuffer[RX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN); + char txbuffer[TX_TOTAL_BUFSIZE] __aligned(ARCH_DMA_MINALIGN); + + u32 interface; + u32 phyaddr; + u32 link; + u32 speed; + u32 duplex; + u32 phy_configured; + u32 tx_currdescnum; + u32 rx_currdescnum; + u32 addr; + u32 tx_slot; + bool use_internal_phy; + + enum emac_variant variant; + void *mac_reg; + phys_addr_t sysctl_reg; + struct phy_device *phydev; + struct mii_dev *bus; +}; + +static int sun8i_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) +{ + struct emac_eth_dev *priv = bus->priv; + ulong start; + u32 miiaddr = 0; + int timeout = CONFIG_MDIO_TIMEOUT; + + miiaddr &= ~MDIO_CMD_MII_WRITE; + miiaddr &= ~MDIO_CMD_MII_PHY_REG_ADDR_MASK; + miiaddr |= (reg << MDIO_CMD_MII_PHY_REG_ADDR_SHIFT) & + MDIO_CMD_MII_PHY_REG_ADDR_MASK; + + miiaddr &= ~MDIO_CMD_MII_PHY_ADDR_MASK; + + miiaddr |= (addr << MDIO_CMD_MII_PHY_ADDR_SHIFT) & + MDIO_CMD_MII_PHY_ADDR_MASK; + + miiaddr |= MDIO_CMD_MII_BUSY; + + writel(miiaddr, priv->mac_reg + EMAC_MII_CMD); + + start = get_timer(0); + while (get_timer(start) < timeout) { + if (!(readl(priv->mac_reg + EMAC_MII_CMD) & MDIO_CMD_MII_BUSY)) + return readl(priv->mac_reg + EMAC_MII_DATA); + udelay(10); + }; + + return -1; +} + +static int sun8i_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, + u16 val) +{ + struct emac_eth_dev *priv = bus->priv; + ulong start; + u32 miiaddr = 0; + int ret = -1, timeout = CONFIG_MDIO_TIMEOUT; + + miiaddr &= ~MDIO_CMD_MII_PHY_REG_ADDR_MASK; + miiaddr |= (reg << MDIO_CMD_MII_PHY_REG_ADDR_SHIFT) & + MDIO_CMD_MII_PHY_REG_ADDR_MASK; + + miiaddr &= ~MDIO_CMD_MII_PHY_ADDR_MASK; + miiaddr |= (addr << MDIO_CMD_MII_PHY_ADDR_SHIFT) & + MDIO_CMD_MII_PHY_ADDR_MASK; + + miiaddr |= MDIO_CMD_MII_WRITE; + miiaddr |= MDIO_CMD_MII_BUSY; + + writel(miiaddr, priv->mac_reg + EMAC_MII_CMD); + writel(val, priv->mac_reg + EMAC_MII_DATA); + + start = get_timer(0); + while (get_timer(start) < timeout) { + if (!(readl(priv->mac_reg + EMAC_MII_CMD) & + MDIO_CMD_MII_BUSY)) { + ret = 0; + break; + } + udelay(10); + }; + + return ret; +} + +static int _sun8i_write_hwaddr(struct emac_eth_dev *priv, u8 *mac_id) +{ + u32 macid_lo, macid_hi; + + macid_lo = mac_id[0] + (mac_id[1] << 8) + (mac_id[2] << 16) + + (mac_id[3] << 24); + macid_hi = mac_id[4] + (mac_id[5] << 8); + + writel(macid_hi, priv->mac_reg + EMAC_ADDR0_HIGH); + writel(macid_lo, priv->mac_reg + EMAC_ADDR0_LOW); + + return 0; +} + +static void sun8i_adjust_link(struct emac_eth_dev *priv, + struct phy_device *phydev) +{ + u32 v; + + v = readl(priv->mac_reg + EMAC_CTL0); + + if (phydev->duplex) + v |= BIT(0); + else + v &= ~BIT(0); + + v &= ~0x0C; + + switch (phydev->speed) { + case 1000: + break; + case 100: + v |= BIT(2); + v |= BIT(3); + break; + case 10: + v |= BIT(3); + break; + } + writel(v, priv->mac_reg + EMAC_CTL0); +} + +static int sun8i_emac_set_syscon_ephy(struct emac_eth_dev *priv, u32 *reg) +{ + if (priv->use_internal_phy) { + /* H3 based SoC's that has an Internal 100MBit PHY + * needs to be configured and powered up before use + */ + *reg &= ~H3_EPHY_DEFAULT_MASK; + *reg |= H3_EPHY_DEFAULT_VALUE; + *reg |= priv->phyaddr << H3_EPHY_ADDR_SHIFT; + *reg &= ~H3_EPHY_SHUTDOWN; + *reg |= H3_EPHY_SELECT; + } else + /* This is to select External Gigabit PHY on + * the boards with H3 SoC. + */ + *reg &= ~H3_EPHY_SELECT; + + return 0; +} + +static int sun8i_emac_set_syscon(struct emac_eth_dev *priv) +{ + int ret; + u32 reg; + + reg = readl(priv->sysctl_reg); + + if (priv->variant == H3_EMAC) { + ret = sun8i_emac_set_syscon_ephy(priv, ®); + if (ret) + return ret; + } + + reg &= ~(SC_ETCS_MASK | SC_EPIT); + if (priv->variant == H3_EMAC || priv->variant == A64_EMAC) + reg &= ~SC_RMII_EN; + + switch (priv->interface) { + case PHY_INTERFACE_MODE_MII: + /* default */ + break; + case PHY_INTERFACE_MODE_RGMII: + reg |= SC_EPIT | SC_ETCS_INT_GMII; + break; + case PHY_INTERFACE_MODE_RMII: + if (priv->variant == H3_EMAC || + priv->variant == A64_EMAC) { + reg |= SC_RMII_EN | SC_ETCS_EXT_GMII; + break; + } + /* RMII not supported on A83T */ + default: + debug("%s: Invalid PHY interface\n", __func__); + return -EINVAL; + } + + writel(reg, priv->sysctl_reg); + + return 0; +} + +static int sun8i_phy_init(struct emac_eth_dev *priv, void *dev) +{ + struct phy_device *phydev; + + phydev = phy_connect(priv->bus, priv->phyaddr, dev, priv->interface); + if (!phydev) + return -ENODEV; + + phy_connect_dev(phydev, dev); + + priv->phydev = phydev; + phy_config(priv->phydev); + + return 0; +} + +static void rx_descs_init(struct emac_eth_dev *priv) +{ + struct emac_dma_desc *desc_table_p = &priv->rx_chain[0]; + char *rxbuffs = &priv->rxbuffer[0]; + struct emac_dma_desc *desc_p; + u32 idx; + + /* flush Rx buffers */ + flush_dcache_range((uintptr_t)rxbuffs, (ulong)rxbuffs + + RX_TOTAL_BUFSIZE); + + for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) { + desc_p = &desc_table_p[idx]; + desc_p->buf_addr = (uintptr_t)&rxbuffs[idx * CONFIG_ETH_BUFSIZE] + ; + desc_p->next = (uintptr_t)&desc_table_p[idx + 1]; + desc_p->st |= CONFIG_ETH_BUFSIZE; + desc_p->status = BIT(31); + } + + /* Correcting the last pointer of the chain */ + desc_p->next = (uintptr_t)&desc_table_p[0]; + + flush_dcache_range((uintptr_t)priv->rx_chain, + (uintptr_t)priv->rx_chain + + sizeof(priv->rx_chain)); + + writel((uintptr_t)&desc_table_p[0], (priv->mac_reg + EMAC_RX_DMA_DESC)); + priv->rx_currdescnum = 0; +} + +static void tx_descs_init(struct emac_eth_dev *priv) +{ + struct emac_dma_desc *desc_table_p = &priv->tx_chain[0]; + char *txbuffs = &priv->txbuffer[0]; + struct emac_dma_desc *desc_p; + u32 idx; + + for (idx = 0; idx < CONFIG_TX_DESCR_NUM; idx++) { + desc_p = &desc_table_p[idx]; + desc_p->buf_addr = (uintptr_t)&txbuffs[idx * CONFIG_ETH_BUFSIZE] + ; + desc_p->next = (uintptr_t)&desc_table_p[idx + 1]; + desc_p->status = (1 << 31); + desc_p->st = 0; + } + + /* Correcting the last pointer of the chain */ + desc_p->next = (uintptr_t)&desc_table_p[0]; + + /* Flush all Tx buffer descriptors */ + flush_dcache_range((uintptr_t)priv->tx_chain, + (uintptr_t)priv->tx_chain + + sizeof(priv->tx_chain)); + + writel((uintptr_t)&desc_table_p[0], priv->mac_reg + EMAC_TX_DMA_DESC); + priv->tx_currdescnum = 0; +} + +static int _sun8i_emac_eth_init(struct emac_eth_dev *priv, u8 *enetaddr) +{ + u32 reg, v; + int timeout = 100; + + reg = readl((priv->mac_reg + EMAC_CTL1)); + + if (!(reg & 0x1)) { + /* Soft reset MAC */ + setbits_le32((priv->mac_reg + EMAC_CTL1), 0x1); + do { + reg = readl(priv->mac_reg + EMAC_CTL1); + } while ((reg & 0x01) != 0 && (--timeout)); + if (!timeout) { + printf("%s: Timeout\n", __func__); + return -1; + } + } + + /* Rewrite mac address after reset */ + _sun8i_write_hwaddr(priv, enetaddr); + + v = readl(priv->mac_reg + EMAC_TX_CTL1); + /* TX_MD Transmission starts after a full frame located in TX DMA FIFO*/ + v |= BIT(1); + writel(v, priv->mac_reg + EMAC_TX_CTL1); + + v = readl(priv->mac_reg + EMAC_RX_CTL1); + /* RX_MD RX DMA reads data from RX DMA FIFO to host memory after a + * complete frame has been written to RX DMA FIFO + */ + v |= BIT(1); + writel(v, priv->mac_reg + EMAC_RX_CTL1); + + /* DMA */ + writel(8 << 24, priv->mac_reg + EMAC_CTL1); + + /* Initialize rx/tx descriptors */ + rx_descs_init(priv); + tx_descs_init(priv); + + /* PHY Start Up */ + genphy_parse_link(priv->phydev); + + sun8i_adjust_link(priv, priv->phydev); + + /* Start RX DMA */ + v = readl(priv->mac_reg + EMAC_RX_CTL1); + v |= BIT(30); + writel(v, priv->mac_reg + EMAC_RX_CTL1); + /* Start TX DMA */ + v = readl(priv->mac_reg + EMAC_TX_CTL1); + v |= BIT(30); + writel(v, priv->mac_reg + EMAC_TX_CTL1); + + /* Enable RX/TX */ + setbits_le32(priv->mac_reg + EMAC_RX_CTL0, BIT(31)); + setbits_le32(priv->mac_reg + EMAC_TX_CTL0, BIT(31)); + + return 0; +} + +static int parse_phy_pins(struct udevice *dev) +{ + int offset; + const char *pin_name; + int drive, pull, i; + + offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset, + "pinctrl-0"); + if (offset < 0) { + printf("WARNING: emac: cannot find pinctrl-0 node\n"); + return offset; + } + + drive = fdt_getprop_u32_default_node(gd->fdt_blob, offset, 0, + "allwinner,drive", 4); + pull = fdt_getprop_u32_default_node(gd->fdt_blob, offset, 0, + "allwinner,pull", 0); + for (i = 0; ; i++) { + int pin; + + if (fdt_get_string_index(gd->fdt_blob, offset, + "allwinner,pins", i, &pin_name)) + break; + if (pin_name[0] != 'P') + continue; + pin = (pin_name[1] - 'A') << 5; + if (pin >= 26 << 5) + continue; + pin += simple_strtol(&pin_name[2], NULL, 10); + + sunxi_gpio_set_cfgpin(pin, SUN8I_GPD8_GMAC); + sunxi_gpio_set_drv(pin, drive); + sunxi_gpio_set_pull(pin, pull); + } + + if (!i) { + printf("WARNING: emac: cannot find allwinner,pins property\n"); + return -2; + } + + return 0; +} + +static int _sun8i_eth_recv(struct emac_eth_dev *priv, uchar **packetp) +{ + u32 status, desc_num = priv->rx_currdescnum; + struct emac_dma_desc *desc_p = &priv->rx_chain[desc_num]; + int length = -EAGAIN; + int good_packet = 1; + uintptr_t desc_start = (uintptr_t)desc_p; + uintptr_t desc_end = desc_start + + roundup(sizeof(*desc_p), ARCH_DMA_MINALIGN); + + ulong data_start = (uintptr_t)desc_p->buf_addr; + ulong data_end; + + /* Invalidate entire buffer descriptor */ + invalidate_dcache_range(desc_start, desc_end); + + status = desc_p->status; + + /* Check for DMA own bit */ + if (!(status & BIT(31))) { + length = (desc_p->status >> 16) & 0x3FFF; + + if (length < 0x40) { + good_packet = 0; + debug("RX: Bad Packet (runt)\n"); + } + + data_end = data_start + length; + /* Invalidate received data */ + invalidate_dcache_range(rounddown(data_start, + ARCH_DMA_MINALIGN), + roundup(data_end, + ARCH_DMA_MINALIGN)); + if (good_packet) { + if (length > CONFIG_ETH_BUFSIZE) { + printf("Received packet is too big (len=%d)\n", + length); + return -EMSGSIZE; + } + *packetp = (uchar *)(ulong)desc_p->buf_addr; + return length; + } + } + + return length; +} + +static int _sun8i_emac_eth_send(struct emac_eth_dev *priv, void *packet, + int len) +{ + u32 v, desc_num = priv->tx_currdescnum; + struct emac_dma_desc *desc_p = &priv->tx_chain[desc_num]; + uintptr_t desc_start = (uintptr_t)desc_p; + uintptr_t desc_end = desc_start + + roundup(sizeof(*desc_p), ARCH_DMA_MINALIGN); + + uintptr_t data_start = (uintptr_t)desc_p->buf_addr; + uintptr_t data_end = data_start + + roundup(len, ARCH_DMA_MINALIGN); + + /* Invalidate entire buffer descriptor */ + invalidate_dcache_range(desc_start, desc_end); + + desc_p->st = len; + /* Mandatory undocumented bit */ + desc_p->st |= BIT(24); + + memcpy((void *)data_start, packet, len); + + /* Flush data to be sent */ + flush_dcache_range(data_start, data_end); + + /* frame end */ + desc_p->st |= BIT(30); + desc_p->st |= BIT(31); + + /*frame begin */ + desc_p->st |= BIT(29); + desc_p->status = BIT(31); + + /*Descriptors st and status field has changed, so FLUSH it */ + flush_dcache_range(desc_start, desc_end); + + /* Move to next Descriptor and wrap around */ + if (++desc_num >= CONFIG_TX_DESCR_NUM) + desc_num = 0; + priv->tx_currdescnum = desc_num; + + /* Start the DMA */ + v = readl(priv->mac_reg + EMAC_TX_CTL1); + v |= BIT(31);/* mandatory */ + v |= BIT(30);/* mandatory */ + writel(v, priv->mac_reg + EMAC_TX_CTL1); + + return 0; +} + +static int sun8i_eth_write_hwaddr(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_platdata(dev); + struct emac_eth_dev *priv = dev_get_priv(dev); + + return _sun8i_write_hwaddr(priv, pdata->enetaddr); +} + +static void sun8i_emac_board_setup(struct emac_eth_dev *priv) +{ + struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; + + if (priv->use_internal_phy) { + /* Set clock gating for ephy */ + setbits_le32(&ccm->bus_gate4, BIT(AHB_GATE_OFFSET_EPHY)); + + /* Set Tx clock source as MII with rate 25 MZ */ + setbits_le32(priv->sysctl_reg, SCTL_EMAC_TX_CLK_SRC_MII | + SCTL_EMAC_EPIT_MII | SCTL_EMAC_CLK_SEL); + /* Deassert EPHY */ + setbits_le32(&ccm->ahb_reset2_cfg, BIT(AHB_RESET_OFFSET_EPHY)); + } + + /* Set clock gating for emac */ + setbits_le32(&ccm->ahb_gate0, BIT(AHB_GATE_OFFSET_GMAC)); + + /* Set EMAC clock */ + setbits_le32(&ccm->axi_gate, (BIT(1) | BIT(0))); + + /* De-assert EMAC */ + setbits_le32(&ccm->ahb_reset0_cfg, BIT(AHB_RESET_OFFSET_GMAC)); +} + +static int sun8i_mdio_init(const char *name, struct emac_eth_dev *priv) +{ + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + debug("Failed to allocate MDIO bus\n"); + return -ENOMEM; + } + + bus->read = sun8i_mdio_read; + bus->write = sun8i_mdio_write; + snprintf(bus->name, sizeof(bus->name), name); + bus->priv = (void *)priv; + + return mdio_register(bus); +} + +static int sun8i_emac_eth_start(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_platdata(dev); + + return _sun8i_emac_eth_init(dev->priv, pdata->enetaddr); +} + +static int sun8i_emac_eth_send(struct udevice *dev, void *packet, int length) +{ + struct emac_eth_dev *priv = dev_get_priv(dev); + + return _sun8i_emac_eth_send(priv, packet, length); +} + +static int sun8i_emac_eth_recv(struct udevice *dev, int flags, uchar **packetp) +{ + struct emac_eth_dev *priv = dev_get_priv(dev); + + return _sun8i_eth_recv(priv, packetp); +} + +static int _sun8i_free_pkt(struct emac_eth_dev *priv) +{ + u32 desc_num = priv->rx_currdescnum; + struct emac_dma_desc *desc_p = &priv->rx_chain[desc_num]; + uintptr_t desc_start = (uintptr_t)desc_p; + uintptr_t desc_end = desc_start + + roundup(sizeof(u32), ARCH_DMA_MINALIGN); + + /* Make the current descriptor valid again */ + desc_p->status |= BIT(31); + + /* Flush Status field of descriptor */ + flush_dcache_range(desc_start, desc_end); + + /* Move to next desc and wrap-around condition. */ + if (++desc_num >= CONFIG_RX_DESCR_NUM) + desc_num = 0; + priv->rx_currdescnum = desc_num; + + return 0; +} + +static int sun8i_eth_free_pkt(struct udevice *dev, uchar *packet, + int length) +{ + struct emac_eth_dev *priv = dev_get_priv(dev); + + return _sun8i_free_pkt(priv); +} + +static void sun8i_emac_eth_stop(struct udevice *dev) +{ + struct emac_eth_dev *priv = dev_get_priv(dev); + + /* Stop Rx/Tx transmitter */ + clrbits_le32(priv->mac_reg + EMAC_RX_CTL0, BIT(31)); + clrbits_le32(priv->mac_reg + EMAC_TX_CTL0, BIT(31)); + + /* Stop TX DMA */ + clrbits_le32(priv->mac_reg + EMAC_TX_CTL1, BIT(30)); + + phy_shutdown(priv->phydev); +} + +static int sun8i_emac_eth_probe(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_platdata(dev); + struct emac_eth_dev *priv = dev_get_priv(dev); + + priv->mac_reg = (void *)pdata->iobase; + + sun8i_emac_board_setup(priv); + + sun8i_mdio_init(dev->name, priv); + priv->bus = miiphy_get_dev_by_name(dev->name); + + sun8i_emac_set_syscon(priv); + + return sun8i_phy_init(priv, dev); +} + +static const struct eth_ops sun8i_emac_eth_ops = { + .start = sun8i_emac_eth_start, + .write_hwaddr = sun8i_eth_write_hwaddr, + .send = sun8i_emac_eth_send, + .recv = sun8i_emac_eth_recv, + .free_pkt = sun8i_eth_free_pkt, + .stop = sun8i_emac_eth_stop, +}; + +static int sun8i_emac_eth_ofdata_to_platdata(struct udevice *dev) +{ + struct eth_pdata *pdata = dev_get_platdata(dev); + struct emac_eth_dev *priv = dev_get_priv(dev); + const char *phy_mode; + int offset = 0; + + pdata->iobase = dev_get_addr_name(dev, "emac"); + priv->sysctl_reg = dev_get_addr_name(dev, "syscon"); + + pdata->phy_interface = -1; + priv->phyaddr = -1; + priv->use_internal_phy = false; + + offset = fdtdec_lookup_phandle(gd->fdt_blob, dev->of_offset, + "phy"); + if (offset > 0) + priv->phyaddr = fdtdec_get_int(gd->fdt_blob, offset, "reg", + -1); + + phy_mode = fdt_getprop(gd->fdt_blob, dev->of_offset, "phy-mode", NULL); + + if (phy_mode) + pdata->phy_interface = phy_get_interface_by_name(phy_mode); + printf("phy interface%d\n", pdata->phy_interface); + + if (pdata->phy_interface == -1) { + debug("%s: Invalid PHY interface '%s'\n", __func__, phy_mode); + return -EINVAL; + } + + priv->variant = dev_get_driver_data(dev); + + if (!priv->variant) { + printf("%s: Missing variant '%s'\n", __func__, + (char *)priv->variant); + return -EINVAL; + } + + if (priv->variant == H3_EMAC) { + if (fdt_getprop(gd->fdt_blob, dev->of_offset, + "allwinner,use-internal-phy", NULL)) + priv->use_internal_phy = true; + } + + priv->interface = pdata->phy_interface; + + if (!priv->use_internal_phy) + parse_phy_pins(dev); + + return 0; +} + +static const struct udevice_id sun8i_emac_eth_ids[] = { + {.compatible = "allwinner,sun8i-h3-emac", .data = (uintptr_t)H3_EMAC }, + {.compatible = "allwinner,sun50i-a64-emac", + .data = (uintptr_t)A64_EMAC }, + {.compatible = "allwinner,sun8i-a83t-emac", + .data = (uintptr_t)A83T_EMAC }, + { } +}; + +U_BOOT_DRIVER(eth_sun8i_emac) = { + .name = "eth_sun8i_emac", + .id = UCLASS_ETH, + .of_match = sun8i_emac_eth_ids, + .ofdata_to_platdata = sun8i_emac_eth_ofdata_to_platdata, + .probe = sun8i_emac_eth_probe, + .ops = &sun8i_emac_eth_ops, + .priv_auto_alloc_size = sizeof(struct emac_eth_dev), + .platdata_auto_alloc_size = sizeof(struct eth_pdata), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index 953c088..2b172a5 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -61,6 +61,7 @@ #include "tegra-common-post.h" #define CONFIG_ARMV7_PSCI 1 +#define CONFIG_ARMV7_PSCI_NR_CPUS 4 /* Reserve top 1M for secure RAM */ #define CONFIG_ARMV7_SECURE_BASE 0xfff00000 #define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000 diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index db684d2..eb444eb 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -10,6 +10,7 @@ #define CONFIG_LS102XA #define CONFIG_ARMV7_PSCI +#define CONFIG_ARMV7_PSCI_NR_CPUS CONFIG_MAX_CPUS #define CONFIG_SYS_FSL_CLK diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index 0fb28ef..616aebb 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -10,6 +10,7 @@ #define CONFIG_LS102XA #define CONFIG_ARMV7_PSCI +#define CONFIG_ARMV7_PSCI_NR_CPUS CONFIG_MAX_CPUS #define CONFIG_SYS_FSL_CLK diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index 95ccc35..0625502 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -25,6 +25,7 @@ #define CONFIG_ARMV7_PSCI 1 #define CONFIG_ARMV7_PSCI_NR_CPUS 4 #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE +#define CONFIG_ARMV7_SECURE_MAX_SIZE (64 * 1024) /* 64 KB */ /* * Include common sunxi configuration where most the settings are diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 0dd2902..e9074d5 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -21,7 +21,9 @@ #define CONFIG_SUNXI_USB_PHYS 3 #define CONFIG_ARMV7_PSCI 1 +#define CONFIG_ARMV7_PSCI_NR_CPUS 2 #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE +#define CONFIG_ARMV7_SECURE_MAX_SIZE (64 * 1024) /* 64 KB */ /* * Include common sunxi configuration where most the settings are diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 94275a7..6358901 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -137,6 +137,11 @@ #define CONFIG_SPL_NAND_SUPPORT 1 #endif +#ifdef CONFIG_SPL_SPI_SUNXI +#define CONFIG_SPL_SPI_FLASH_SUPPORT 1 +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 +#endif + /* mmc config */ #ifdef CONFIG_MMC #define CONFIG_GENERIC_MMC |