diff options
76 files changed, 3248 insertions, 390 deletions
@@ -529,6 +529,12 @@ LIST_sparc="$(targets_by_arch sparc)" LIST_nds32="$(targets_by_arch nds32)" +######################################################################### +## ARC Systems +######################################################################### + +LIST_arc="$(targets_by_arch arc)" + #----------------------------------------------------------------------- get_target_location() { diff --git a/arch/arc/config.mk b/arch/arc/config.mk new file mode 100644 index 0000000..76f4f7c --- /dev/null +++ b/arch/arc/config.mk @@ -0,0 +1,31 @@ +# +# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifndef CONFIG_SYS_BIG_ENDIAN +CONFIG_SYS_LITTLE_ENDIAN = 1 +endif + +ifdef CONFIG_SYS_LITTLE_ENDIAN +CROSS_COMPILE ?= arc-buildroot-linux-uclibc- +endif + +ifdef CONFIG_SYS_BIG_ENDIAN +CROSS_COMPILE ?= arceb-buildroot-linux-uclibc- +PLATFORM_LDFLAGS += -EB +endif + +PLATFORM_CPPFLAGS += -ffixed-r25 -D__ARC__ -DCONFIG_ARC -gdwarf-2 + +LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds + +# Needed for relocation +LDFLAGS_FINAL += -pie + +# Load address for standalone apps +CONFIG_STANDALONE_LOAD_ADDR ?= 0x82000000 + +# Support generic board on ARC +__HAVE_ARCH_GENERIC_BOARD := y diff --git a/arch/arc/cpu/arc700/Makefile b/arch/arc/cpu/arc700/Makefile new file mode 100644 index 0000000..cdc5002 --- /dev/null +++ b/arch/arc/cpu/arc700/Makefile @@ -0,0 +1,13 @@ +# +# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +extra-y += start.o + +obj-y += cache.o +obj-y += cpu.o +obj-y += interrupts.o +obj-y += reset.o +obj-y += timer.o diff --git a/arch/arc/cpu/arc700/cache.c b/arch/arc/cpu/arc700/cache.c new file mode 100644 index 0000000..39d522d --- /dev/null +++ b/arch/arc/cpu/arc700/cache.c @@ -0,0 +1,138 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <config.h> +#include <asm/arcregs.h> + +/* Bit values in IC_CTRL */ +#define IC_CTRL_CACHE_DISABLE (1 << 0) + +/* Bit values in DC_CTRL */ +#define DC_CTRL_CACHE_DISABLE (1 << 0) +#define DC_CTRL_INV_MODE_FLUSH (1 << 6) +#define DC_CTRL_FLUSH_STATUS (1 << 8) + +int icache_status(void) +{ + return (read_aux_reg(ARC_AUX_IC_CTRL) & IC_CTRL_CACHE_DISABLE) != + IC_CTRL_CACHE_DISABLE; +} + +void icache_enable(void) +{ + write_aux_reg(ARC_AUX_IC_CTRL, read_aux_reg(ARC_AUX_IC_CTRL) & + ~IC_CTRL_CACHE_DISABLE); +} + +void icache_disable(void) +{ + write_aux_reg(ARC_AUX_IC_CTRL, read_aux_reg(ARC_AUX_IC_CTRL) | + IC_CTRL_CACHE_DISABLE); +} + +void invalidate_icache_all(void) +{ +#ifndef CONFIG_SYS_ICACHE_OFF + /* Any write to IC_IVIC register triggers invalidation of entire I$ */ + write_aux_reg(ARC_AUX_IC_IVIC, 1); +#endif /* CONFIG_SYS_ICACHE_OFF */ +} + +int dcache_status(void) +{ + return (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_CACHE_DISABLE) != + DC_CTRL_CACHE_DISABLE; +} + +void dcache_enable(void) +{ + write_aux_reg(ARC_AUX_DC_CTRL, read_aux_reg(ARC_AUX_DC_CTRL) & + ~(DC_CTRL_INV_MODE_FLUSH | DC_CTRL_CACHE_DISABLE)); +} + +void dcache_disable(void) +{ + write_aux_reg(ARC_AUX_DC_CTRL, read_aux_reg(ARC_AUX_DC_CTRL) | + DC_CTRL_CACHE_DISABLE); +} + +void flush_dcache_all(void) +{ + /* Do flush of entire cache */ + write_aux_reg(ARC_AUX_DC_FLSH, 1); + + /* Wait flush end */ + while (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_FLUSH_STATUS) + ; +} + +#ifndef CONFIG_SYS_DCACHE_OFF +static void dcache_flush_line(unsigned addr) +{ +#if (CONFIG_ARC_MMU_VER > 2) + write_aux_reg(ARC_AUX_DC_PTAG, addr); +#endif + write_aux_reg(ARC_AUX_DC_FLDL, addr); + + /* Wait flush end */ + while (read_aux_reg(ARC_AUX_DC_CTRL) & DC_CTRL_FLUSH_STATUS) + ; + +#ifndef CONFIG_SYS_ICACHE_OFF + /* + * Invalidate I$ for addresses range just flushed from D$. + * If we try to execute data flushed above it will be valid/correct + */ +#if (CONFIG_ARC_MMU_VER > 2) + write_aux_reg(ARC_AUX_IC_PTAG, addr); +#endif + write_aux_reg(ARC_AUX_IC_IVIL, addr); +#endif /* CONFIG_SYS_ICACHE_OFF */ +} +#endif /* CONFIG_SYS_DCACHE_OFF */ + +void flush_dcache_range(unsigned long start, unsigned long end) +{ +#ifndef CONFIG_SYS_DCACHE_OFF + unsigned int addr; + + start = start & (~(CONFIG_SYS_CACHELINE_SIZE - 1)); + end = end & (~(CONFIG_SYS_CACHELINE_SIZE - 1)); + + for (addr = start; addr <= end; addr += CONFIG_SYS_CACHELINE_SIZE) + dcache_flush_line(addr); +#endif /* CONFIG_SYS_DCACHE_OFF */ +} + +void invalidate_dcache_range(unsigned long start, unsigned long end) +{ +#ifndef CONFIG_SYS_DCACHE_OFF + unsigned int addr; + + start = start & (~(CONFIG_SYS_CACHELINE_SIZE - 1)); + end = end & (~(CONFIG_SYS_CACHELINE_SIZE - 1)); + + for (addr = start; addr <= end; addr += CONFIG_SYS_CACHELINE_SIZE) { +#if (CONFIG_ARC_MMU_VER > 2) + write_aux_reg(ARC_AUX_DC_PTAG, addr); +#endif + write_aux_reg(ARC_AUX_DC_IVDL, addr); + } +#endif /* CONFIG_SYS_DCACHE_OFF */ +} + +void invalidate_dcache_all(void) +{ +#ifndef CONFIG_SYS_DCACHE_OFF + /* Write 1 to DC_IVDC register triggers invalidation of entire D$ */ + write_aux_reg(ARC_AUX_DC_IVDC, 1); +#endif /* CONFIG_SYS_DCACHE_OFF */ +} + +void flush_cache(unsigned long start, unsigned long size) +{ + flush_dcache_range(start, start + size); +} diff --git a/arch/arc/cpu/arc700/config.mk b/arch/arc/cpu/arc700/config.mk new file mode 100644 index 0000000..3206ff4 --- /dev/null +++ b/arch/arc/cpu/arc700/config.mk @@ -0,0 +1,7 @@ +# +# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +PLATFORM_CPPFLAGS += -mA7 diff --git a/arch/arc/cpu/arc700/cpu.c b/arch/arc/cpu/arc700/cpu.c new file mode 100644 index 0000000..50634b8 --- /dev/null +++ b/arch/arc/cpu/arc700/cpu.c @@ -0,0 +1,47 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arcregs.h> +#include <asm/cache.h> + +DECLARE_GLOBAL_DATA_PTR; + +int arch_cpu_init(void) +{ +#ifdef CONFIG_SYS_ICACHE_OFF + icache_disable(); +#else + icache_enable(); + invalidate_icache_all(); +#endif + + flush_dcache_all(); +#ifdef CONFIG_SYS_DCACHE_OFF + dcache_disable(); +#else + dcache_enable(); +#endif + timer_init(); + +/* In simulation (ISS) "CHIPID" and "ARCNUM" are all "ff" */ + if ((read_aux_reg(ARC_AUX_IDENTITY) & 0xffffff00) == 0xffffff00) + gd->arch.running_on_hw = 0; + else + gd->arch.running_on_hw = 1; + + gd->cpu_clk = CONFIG_SYS_CLK_FREQ; + gd->ram_size = CONFIG_SYS_SDRAM_SIZE; + + return 0; +} + +int arch_early_init_r(void) +{ + gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; + gd->bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE; + return 0; +} diff --git a/arch/arc/cpu/arc700/interrupts.c b/arch/arc/cpu/arc700/interrupts.c new file mode 100644 index 0000000..d93a6eb --- /dev/null +++ b/arch/arc/cpu/arc700/interrupts.c @@ -0,0 +1,142 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/arcregs.h> +#include <asm/ptrace.h> + +/* Bit values in STATUS32 */ +#define E1_MASK (1 << 1) /* Level 1 interrupts enable */ +#define E2_MASK (1 << 2) /* Level 2 interrupts enable */ + +int interrupt_init(void) +{ + return 0; +} + +/* + * returns true if interrupts had been enabled before we disabled them + */ +int disable_interrupts(void) +{ + int status = read_aux_reg(ARC_AUX_STATUS32); + int state = (status | E1_MASK | E2_MASK) ? 1 : 0; + + status &= ~(E1_MASK | E2_MASK); + /* STATUS32 register is updated indirectly with "FLAG" instruction */ + __asm__("flag %0" : : "r" (status)); + return state; +} + +void enable_interrupts(void) +{ + unsigned int status = read_aux_reg(ARC_AUX_STATUS32); + + status |= E1_MASK | E2_MASK; + /* STATUS32 register is updated indirectly with "FLAG" instruction */ + __asm__("flag %0" : : "r" (status)); +} + +static void print_reg_file(long *reg_rev, int start_num) +{ + unsigned int i; + + /* Print 3 registers per line */ + for (i = start_num; i < start_num + 25; i++) { + printf("r%02u: 0x%08lx\t", i, (unsigned long)*reg_rev); + if (((i + 1) % 3) == 0) + printf("\n"); + + /* Because pt_regs has registers reversed */ + reg_rev--; + } + + /* Add new-line if none was inserted in the end of loop above */ + if (((i + 1) % 3) != 0) + printf("\n"); +} + +void show_regs(struct pt_regs *regs) +{ + printf("RET:\t0x%08lx\nBLINK:\t0x%08lx\nSTAT32:\t0x%08lx\n", + regs->ret, regs->blink, regs->status32); + printf("GP: 0x%08lx\t r25: 0x%08lx\t\n", regs->r26, regs->r25); + printf("BTA: 0x%08lx\t SP: 0x%08lx\t FP: 0x%08lx\n", regs->bta, + regs->sp, regs->fp); + printf("LPS: 0x%08lx\tLPE: 0x%08lx\tLPC: 0x%08lx\n", regs->lp_start, + regs->lp_end, regs->lp_count); + + print_reg_file(&(regs->r0), 0); +} + +void bad_mode(struct pt_regs *regs) +{ + if (regs) + show_regs(regs); + + panic("Resetting CPU ...\n"); +} + +void do_memory_error(unsigned long address, struct pt_regs *regs) +{ + printf("Memory error exception @ 0x%lx\n", address); + bad_mode(regs); +} + +void do_instruction_error(unsigned long address, struct pt_regs *regs) +{ + printf("Instruction error exception @ 0x%lx\n", address); + bad_mode(regs); +} + +void do_machine_check_fault(unsigned long address, struct pt_regs *regs) +{ + printf("Machine check exception @ 0x%lx\n", address); + bad_mode(regs); +} + +void do_interrupt_handler(void) +{ + printf("Interrupt fired\n"); + bad_mode(0); +} + +void do_itlb_miss(struct pt_regs *regs) +{ + printf("I TLB miss exception\n"); + bad_mode(regs); +} + +void do_dtlb_miss(struct pt_regs *regs) +{ + printf("D TLB miss exception\n"); + bad_mode(regs); +} + +void do_tlb_prot_violation(unsigned long address, struct pt_regs *regs) +{ + printf("TLB protection violation or misaligned access @ 0x%lx\n", + address); + bad_mode(regs); +} + +void do_privilege_violation(struct pt_regs *regs) +{ + printf("Privilege violation exception\n"); + bad_mode(regs); +} + +void do_trap(struct pt_regs *regs) +{ + printf("Trap exception\n"); + bad_mode(regs); +} + +void do_extension(struct pt_regs *regs) +{ + printf("Extension instruction exception\n"); + bad_mode(regs); +} diff --git a/arch/arc/cpu/arc700/reset.c b/arch/arc/cpu/arc700/reset.c new file mode 100644 index 0000000..98ebf1d --- /dev/null +++ b/arch/arc/cpu/arc700/reset.c @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <command.h> +#include <common.h> + +int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + printf("Put your restart handler here\n"); + +#ifdef DEBUG + /* Stop debug session here */ + __asm__("brk"); +#endif + return 0; +} diff --git a/arch/arc/cpu/arc700/start.S b/arch/arc/cpu/arc700/start.S new file mode 100644 index 0000000..563513b --- /dev/null +++ b/arch/arc/cpu/arc700/start.S @@ -0,0 +1,241 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm-offsets.h> +#include <config.h> +#include <asm/arcregs.h> + +/* + * Note on the LD/ST addressing modes with address register write-back + * + * LD.a same as LD.aw + * + * LD.a reg1, [reg2, x] => Pre Incr + * Eff Addr for load = [reg2 + x] + * + * LD.ab reg1, [reg2, x] => Post Incr + * Eff Addr for load = [reg2] + */ + +.macro PUSH reg + st.a \reg, [%sp, -4] +.endm + +.macro PUSHAX aux + lr %r9, [\aux] + PUSH %r9 +.endm + +.macro SAVE_R1_TO_R24 + PUSH %r1 + PUSH %r2 + PUSH %r3 + PUSH %r4 + PUSH %r5 + PUSH %r6 + PUSH %r7 + PUSH %r8 + PUSH %r9 + PUSH %r10 + PUSH %r11 + PUSH %r12 + PUSH %r13 + PUSH %r14 + PUSH %r15 + PUSH %r16 + PUSH %r17 + PUSH %r18 + PUSH %r19 + PUSH %r20 + PUSH %r21 + PUSH %r22 + PUSH %r23 + PUSH %r24 +.endm + +.macro SAVE_ALL_SYS + + st %r0, [%sp] + lr %r0, [%ecr] + st %r0, [%sp, 8] /* ECR */ + st %sp, [%sp, 4] + + SAVE_R1_TO_R24 + PUSH %r25 + PUSH %gp + PUSH %fp + PUSH %blink + PUSHAX %eret + PUSHAX %erstatus + PUSH %lp_count + PUSHAX %lp_end + PUSHAX %lp_start + PUSHAX %erbta +.endm + +.align 4 +.globl _start +_start: + /* Critical system events */ + j reset /* 0 - 0x000 */ + j memory_error /* 1 - 0x008 */ + j instruction_error /* 2 - 0x010 */ + + /* Device interrupts */ +.rept 29 + j interrupt_handler /* 3:31 - 0x018:0xF8 */ +.endr + /* Exceptions */ + j EV_MachineCheck /* 0x100, Fatal Machine check (0x20) */ + j EV_TLBMissI /* 0x108, Intruction TLB miss (0x21) */ + j EV_TLBMissD /* 0x110, Data TLB miss (0x22) */ + j EV_TLBProtV /* 0x118, Protection Violation (0x23) + or Misaligned Access */ + j EV_PrivilegeV /* 0x120, Privilege Violation (0x24) */ + j EV_Trap /* 0x128, Trap exception (0x25) */ + j EV_Extension /* 0x130, Extn Intruction Excp (0x26) */ + +memory_error: + SAVE_ALL_SYS + lr %r0, [%efa] + mov %r1, %sp + j do_memory_error + +instruction_error: + SAVE_ALL_SYS + lr %r0, [%efa] + mov %r1, %sp + j do_instruction_error + +interrupt_handler: + /* Todo - save and restore CPU context when interrupts will be in use */ + bl do_interrupt_handler + rtie + +EV_MachineCheck: + SAVE_ALL_SYS + lr %r0, [%efa] + mov %r1, %sp + j do_machine_check_fault + +EV_TLBMissI: + SAVE_ALL_SYS + mov %r0, %sp + j do_itlb_miss + +EV_TLBMissD: + SAVE_ALL_SYS + mov %r0, %sp + j do_dtlb_miss + +EV_TLBProtV: + SAVE_ALL_SYS + lr %r0, [%efa] + mov %r1, %sp + j do_tlb_prot_violation + +EV_PrivilegeV: + SAVE_ALL_SYS + mov %r0, %sp + j do_privilege_violation + +EV_Trap: + SAVE_ALL_SYS + mov %r0, %sp + j do_trap + +EV_Extension: + SAVE_ALL_SYS + mov %r0, %sp + j do_extension + + +reset: + /* Setup interrupt vector base that matches "__text_start" */ + sr __text_start, [ARC_AUX_INTR_VEC_BASE] + + /* Setup stack pointer */ + mov %sp, CONFIG_SYS_INIT_SP_ADDR + mov %fp, %sp + + /* Clear bss */ + mov %r0, __bss_start + mov %r1, __bss_end + +clear_bss: + st.ab 0, [%r0, 4] + brlt %r0, %r1, clear_bss + + /* Zero the one and only argument of "board_init_f" */ + mov_s %r0, 0 + j board_init_f + +/* + * void relocate_code (addr_sp, gd, addr_moni) + * + * This "function" does not return, instead it continues in RAM + * after relocating the monitor code. + * + * r0 = start_addr_sp + * r1 = new__gd + * r2 = relocaddr + */ +.align 4 +.globl relocate_code +relocate_code: + /* + * r0-r12 might be clobbered by C functions + * so we use r13-r16 for storage here + */ + mov %r13, %r0 /* save addr_sp */ + mov %r14, %r1 /* save addr of gd */ + mov %r15, %r2 /* save addr of destination */ + + mov %r16, %r2 /* %r9 - relocation offset */ + sub %r16, %r16, __image_copy_start + +/* Set up the stack */ +stack_setup: + mov %sp, %r13 + mov %fp, %sp + +/* Check if monitor is loaded right in place for relocation */ + mov %r0, __image_copy_start + cmp %r0, %r15 /* skip relocation if code loaded */ + bz do_board_init_r /* in target location already */ + +/* Copy data (__image_copy_start - __image_copy_end) to new location */ + mov %r1, %r15 + mov %r2, __image_copy_end + sub %r2, %r2, %r0 /* r3 <- amount of bytes to copy */ + asr %r2, %r2, 2 /* r3 <- amount of words to copy */ + mov %lp_count, %r2 + lp copy_end + ld.ab %r2,[%r0,4] + st.ab %r2,[%r1,4] +copy_end: + +/* Fix relocations related issues */ + bl do_elf_reloc_fixups +#ifndef CONFIG_SYS_ICACHE_OFF + bl invalidate_icache_all +#endif +#ifndef CONFIG_SYS_DCACHE_OFF + bl flush_dcache_all +#endif + +/* Update position of intterupt vector table */ + lr %r0, [ARC_AUX_INTR_VEC_BASE] /* Read current position */ + add %r0, %r0, %r16 /* Update address */ + sr %r0, [ARC_AUX_INTR_VEC_BASE] /* Write new position */ + +do_board_init_r: +/* Prepare for exection of "board_init_r" in relocated monitor */ + mov %r2, board_init_r /* old address of "board_init_r()" */ + add %r2, %r2, %r16 /* new address of "board_init_r()" */ + mov %r0, %r14 /* 1-st parameter: gd_t */ + mov %r1, %r15 /* 2-nd parameter: dest_addr */ + j [%r2] diff --git a/arch/arc/cpu/arc700/timer.c b/arch/arc/cpu/arc700/timer.c new file mode 100644 index 0000000..a0acbbc --- /dev/null +++ b/arch/arc/cpu/arc700/timer.c @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arcregs.h> + +#define NH_MODE (1 << 1) /* Disable timer if CPU is halted */ + +int timer_init(void) +{ + write_aux_reg(ARC_AUX_TIMER0_CTRL, NH_MODE); + /* Set max value for counter/timer */ + write_aux_reg(ARC_AUX_TIMER0_LIMIT, 0xffffffff); + /* Set initial count value and restart counter/timer */ + write_aux_reg(ARC_AUX_TIMER0_CNT, 0); + return 0; +} + +unsigned long timer_read_counter(void) +{ + return read_aux_reg(ARC_AUX_TIMER0_CNT); +} diff --git a/arch/arc/cpu/arc700/u-boot.lds b/arch/arc/cpu/arc700/u-boot.lds new file mode 100644 index 0000000..2d01b21 --- /dev/null +++ b/arch/arc/cpu/arc700/u-boot.lds @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +OUTPUT_FORMAT("elf32-littlearc", "elf32-littlearc", "elf32-littlearc") +OUTPUT_ARCH(arc) +ENTRY(_start) +SECTIONS +{ + . = ALIGN(4); + .text : { + *(.__text_start) + *(.__image_copy_start) + CPUDIR/start.o (.text*) + *(.text*) + } + + . = ALIGN(4); + .text_end : + { + *(.__text_end) + } + + . = ALIGN(4); + .rodata : { + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } + + . = ALIGN(4); + .data : { + *(.data*) + } + + . = ALIGN(4); + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } + + . = ALIGN(4); + .rel_dyn_start : { + *(.__rel_dyn_start) + } + + .rela.dyn : { + *(.rela.dyn) + } + + .rel_dyn_end : { + *(.__rel_dyn_end) + } + + . = ALIGN(4); + .bss_start : { + *(.__bss_start); + } + + .bss : { + *(.bss*) + } + + .bss_end : { + *(.__bss_end); + } + + . = ALIGN(4); + .image_copy_end : { + *(.__image_copy_end) + *(.__init_end) + } +} diff --git a/arch/arc/include/asm/arch-arc700/hardware.h b/arch/arc/include/asm/arch-arc700/hardware.h new file mode 100644 index 0000000..8ec13a8 --- /dev/null +++ b/arch/arc/include/asm/arch-arc700/hardware.h @@ -0,0 +1,10 @@ +/* + * Copyright (C) 2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * This file is only required to allow compilation of "designware_i2c" driver. + * Which explicitly includes <asm/arch/hardware.h>. + */ diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h new file mode 100644 index 0000000..5d48d11 --- /dev/null +++ b/arch/arc/include/asm/arcregs.h @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARC_ARCREGS_H +#define _ASM_ARC_ARCREGS_H + +/* + * ARC architecture has additional address space - auxiliary registers. + * These registers are mostly used for configuration purposes. + * These registers are not memory mapped and special commands are used for + * access: "lr"/"sr". + */ + +#define ARC_AUX_IDENTITY 0x04 +#define ARC_AUX_STATUS32 0x0a + +/* Instruction cache related auxiliary registers */ +#define ARC_AUX_IC_IVIC 0x10 +#define ARC_AUX_IC_CTRL 0x11 +#define ARC_AUX_IC_IVIL 0x19 +#if (CONFIG_ARC_MMU_VER > 2) +#define ARC_AUX_IC_PTAG 0x1E +#endif + +/* Timer related auxiliary registers */ +#define ARC_AUX_TIMER0_CNT 0x21 /* Timer 0 count */ +#define ARC_AUX_TIMER0_CTRL 0x22 /* Timer 0 control */ +#define ARC_AUX_TIMER0_LIMIT 0x23 /* Timer 0 limit */ + +#define ARC_AUX_INTR_VEC_BASE 0x25 + +/* Data cache related auxiliary registers */ +#define ARC_AUX_DC_IVDC 0x47 +#define ARC_AUX_DC_CTRL 0x48 + +#define ARC_AUX_DC_IVDL 0x4A +#define ARC_AUX_DC_FLSH 0x4B +#define ARC_AUX_DC_FLDL 0x4C +#if (CONFIG_ARC_MMU_VER > 2) +#define ARC_AUX_DC_PTAG 0x5C +#endif + +#ifndef __ASSEMBLY__ +/* Accessors for auxiliary registers */ +#define read_aux_reg(reg) __builtin_arc_lr(reg) + +/* gcc builtin sr needs reg param to be long immediate */ +#define write_aux_reg(reg_immed, val) \ + __builtin_arc_sr((unsigned int)val, reg_immed) +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_ARC_ARCREGS_H */ diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h new file mode 100644 index 0000000..85721aa --- /dev/null +++ b/arch/arc/include/asm/bitops.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_BITOPS_H +#define __ASM_ARC_BITOPS_H + +/* + * hweightN: returns the hamming weight (i.e. the number + * of bits set) of a N-bit word + */ + +#define hweight32(x) generic_hweight32(x) +#define hweight16(x) generic_hweight16(x) +#define hweight8(x) generic_hweight8(x) + +#endif /* __ASM_ARC_BITOPS_H */ diff --git a/arch/arc/include/asm/byteorder.h b/arch/arc/include/asm/byteorder.h new file mode 100644 index 0000000..2fa9776 --- /dev/null +++ b/arch/arc/include/asm/byteorder.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_BYTEORDER_H +#define __ASM_ARC_BYTEORDER_H + +#include <asm/types.h> + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) + #define __BYTEORDER_HAS_U64__ + #define __SWAB_64_THRU_32__ +#endif + +#ifdef __LITTLE_ENDIAN__ + #include <linux/byteorder/little_endian.h> +#else + #include <linux/byteorder/big_endian.h> +#endif /* CONFIG_SYS_BIG_ENDIAN */ + +#endif /* ASM_ARC_BYTEORDER_H */ diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h new file mode 100644 index 0000000..16e7568 --- /dev/null +++ b/arch/arc/include/asm/cache.h @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_CACHE_H +#define __ASM_ARC_CACHE_H + +#include <config.h> + +/* + * The current upper bound for ARC L1 data cache line sizes is 128 bytes. + * We use that value for aligning DMA buffers unless the board config has + * specified an alternate cache line size. + */ +#ifdef CONFIG_SYS_CACHELINE_SIZE +#define ARCH_DMA_MINALIGN CONFIG_SYS_CACHELINE_SIZE +#else +#define ARCH_DMA_MINALIGN 128 +#endif + +#endif /* __ASM_ARC_CACHE_H */ diff --git a/arch/arc/include/asm/config.h b/arch/arc/include/asm/config.h new file mode 100644 index 0000000..5761def --- /dev/null +++ b/arch/arc/include/asm/config.h @@ -0,0 +1,12 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_CONFIG_H_ +#define __ASM_ARC_CONFIG_H_ + +#define CONFIG_LMB + +#endif /*__ASM_ARC_CONFIG_H_ */ diff --git a/arch/arc/include/asm/errno.h b/arch/arc/include/asm/errno.h new file mode 100644 index 0000000..4c82b50 --- /dev/null +++ b/arch/arc/include/asm/errno.h @@ -0,0 +1 @@ +#include <asm-generic/errno.h> diff --git a/arch/arc/include/asm/global_data.h b/arch/arc/include/asm/global_data.h new file mode 100644 index 0000000..d644e80 --- /dev/null +++ b/arch/arc/include/asm/global_data.h @@ -0,0 +1,19 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_GLOBAL_DATA_H +#define __ASM_ARC_GLOBAL_DATA_H + +/* Architecture-specific global data */ +struct arch_global_data { + int running_on_hw; +}; + +#include <asm-generic/global_data.h> + +#define DECLARE_GLOBAL_DATA_PTR register volatile gd_t *gd asm ("r25") + +#endif /* __ASM_ARC_GLOBAL_DATA_H */ diff --git a/arch/arc/include/asm/io.h b/arch/arc/include/asm/io.h new file mode 100644 index 0000000..24b7337 --- /dev/null +++ b/arch/arc/include/asm/io.h @@ -0,0 +1,218 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_IO_H +#define __ASM_ARC_IO_H + +#include <linux/types.h> +#include <asm/byteorder.h> + +static inline void sync(void) +{ + /* Not yet implemented */ +} + +static inline u8 __raw_readb(const volatile void __iomem *addr) +{ + u8 b; + + __asm__ __volatile__("ldb%U1 %0, %1\n" + : "=r" (b) + : "m" (*(volatile u8 __force *)addr) + : "memory"); + return b; +} + +static inline u16 __raw_readw(const volatile void __iomem *addr) +{ + u16 s; + + __asm__ __volatile__("ldw%U1 %0, %1\n" + : "=r" (s) + : "m" (*(volatile u16 __force *)addr) + : "memory"); + return s; +} + +static inline u32 __raw_readl(const volatile void __iomem *addr) +{ + u32 w; + + __asm__ __volatile__("ld%U1 %0, %1\n" + : "=r" (w) + : "m" (*(volatile u32 __force *)addr) + : "memory"); + return w; +} + +#define readb __raw_readb + +static inline u16 readw(const volatile void __iomem *addr) +{ + return __le16_to_cpu(__raw_readw(addr)); +} + +static inline u32 readl(const volatile void __iomem *addr) +{ + return __le32_to_cpu(__raw_readl(addr)); +} + +static inline void __raw_writeb(u8 b, volatile void __iomem *addr) +{ + __asm__ __volatile__("stb%U1 %0, %1\n" + : + : "r" (b), "m" (*(volatile u8 __force *)addr) + : "memory"); +} + +static inline void __raw_writew(u16 s, volatile void __iomem *addr) +{ + __asm__ __volatile__("stw%U1 %0, %1\n" + : + : "r" (s), "m" (*(volatile u16 __force *)addr) + : "memory"); +} + +static inline void __raw_writel(u32 w, volatile void __iomem *addr) +{ + __asm__ __volatile__("st%U1 %0, %1\n" + : + : "r" (w), "m" (*(volatile u32 __force *)addr) + : "memory"); +} + +#define writeb __raw_writeb +#define writew(b, addr) __raw_writew(__cpu_to_le16(b), addr) +#define writel(b, addr) __raw_writel(__cpu_to_le32(b), addr) + +static inline int __raw_readsb(unsigned int addr, void *data, int bytelen) +{ + __asm__ __volatile__ ("1:ld.di r8, [r0]\n" + "sub.f r2, r2, 1\n" + "bnz.d 1b\n" + "stb.ab r8, [r1, 1]\n" + : + : "r" (addr), "r" (data), "r" (bytelen) + : "r8"); + return bytelen; +} + +static inline int __raw_readsw(unsigned int addr, void *data, int wordlen) +{ + __asm__ __volatile__ ("1:ld.di r8, [r0]\n" + "sub.f r2, r2, 1\n" + "bnz.d 1b\n" + "stw.ab r8, [r1, 2]\n" + : + : "r" (addr), "r" (data), "r" (wordlen) + : "r8"); + return wordlen; +} + +static inline int __raw_readsl(unsigned int addr, void *data, int longlen) +{ + __asm__ __volatile__ ("1:ld.di r8, [r0]\n" + "sub.f r2, r2, 1\n" + "bnz.d 1b\n" + "st.ab r8, [r1, 4]\n" + : + : "r" (addr), "r" (data), "r" (longlen) + : "r8"); + return longlen; +} + +static inline int __raw_writesb(unsigned int addr, void *data, int bytelen) +{ + __asm__ __volatile__ ("1:ldb.ab r8, [r1, 1]\n" + "sub.f r2, r2, 1\n" + "bnz.d 1b\n" + "st.di r8, [r0, 0]\n" + : + : "r" (addr), "r" (data), "r" (bytelen) + : "r8"); + return bytelen; +} + +static inline int __raw_writesw(unsigned int addr, void *data, int wordlen) +{ + __asm__ __volatile__ ("1:ldw.ab r8, [r1, 2]\n" + "sub.f r2, r2, 1\n" + "bnz.d 1b\n" + "st.ab.di r8, [r0, 0]\n" + : + : "r" (addr), "r" (data), "r" (wordlen) + : "r8"); + return wordlen; +} + +static inline int __raw_writesl(unsigned int addr, void *data, int longlen) +{ + __asm__ __volatile__ ("1:ld.ab r8, [r1, 4]\n" + "sub.f r2, r2, 1\n" + "bnz.d 1b\n" + "st.ab.di r8, [r0, 0]\n" + : + : "r" (addr), "r" (data), "r" (longlen) + : "r8"); + return longlen; +} + +#define out_arch(type, endian, a, v) __raw_write##type(cpu_to_##endian(v), a) +#define in_arch(type, endian, a) endian##_to_cpu(__raw_read##type(a)) + +#define out_le32(a, v) out_arch(l, le32, a, v) +#define out_le16(a, v) out_arch(w, le16, a, v) + +#define in_le32(a) in_arch(l, le32, a) +#define in_le16(a) in_arch(w, le16, a) + +#define out_be32(a, v) out_arch(l, be32, a, v) +#define out_be16(a, v) out_arch(w, be16, a, v) + +#define in_be32(a) in_arch(l, be32, a) +#define in_be16(a) in_arch(w, be16, a) + +#define out_8(a, v) __raw_writeb(v, a) +#define in_8(a) __raw_readb(a) + +/* + * Clear and set bits in one shot. These macros can be used to clear and + * set multiple bits in a register using a single call. These macros can + * also be used to set a multiple-bit bit pattern using a mask, by + * specifying the mask in the 'clear' parameter and the new bit pattern + * in the 'set' parameter. + */ + +#define clrbits(type, addr, clear) \ + out_##type((addr), in_##type(addr) & ~(clear)) + +#define setbits(type, addr, set) \ + out_##type((addr), in_##type(addr) | (set)) + +#define clrsetbits(type, addr, clear, set) \ + out_##type((addr), (in_##type(addr) & ~(clear)) | (set)) + +#define clrbits_be32(addr, clear) clrbits(be32, addr, clear) +#define setbits_be32(addr, set) setbits(be32, addr, set) +#define clrsetbits_be32(addr, clear, set) clrsetbits(be32, addr, clear, set) + +#define clrbits_le32(addr, clear) clrbits(le32, addr, clear) +#define setbits_le32(addr, set) setbits(le32, addr, set) +#define clrsetbits_le32(addr, clear, set) clrsetbits(le32, addr, clear, set) + +#define clrbits_be16(addr, clear) clrbits(be16, addr, clear) +#define setbits_be16(addr, set) setbits(be16, addr, set) +#define clrsetbits_be16(addr, clear, set) clrsetbits(be16, addr, clear, set) + +#define clrbits_le16(addr, clear) clrbits(le16, addr, clear) +#define setbits_le16(addr, set) setbits(le16, addr, set) +#define clrsetbits_le16(addr, clear, set) clrsetbits(le16, addr, clear, set) + +#define clrbits_8(addr, clear) clrbits(8, addr, clear) +#define setbits_8(addr, set) setbits(8, addr, set) +#define clrsetbits_8(addr, clear, set) clrsetbits(8, addr, clear, set) + +#endif /* __ASM_ARC_IO_H */ diff --git a/arch/arc/include/asm/posix_types.h b/arch/arc/include/asm/posix_types.h new file mode 100644 index 0000000..20415f0 --- /dev/null +++ b/arch/arc/include/asm/posix_types.h @@ -0,0 +1,39 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_POSIX_TYPES_H +#define __ASM_ARC_POSIX_TYPES_H + +typedef unsigned short __kernel_dev_t; +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_daddr_t; +typedef char *__kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +#endif /* __ASM_ARC_POSIX_TYPES_H */ diff --git a/arch/arc/include/asm/ptrace.h b/arch/arc/include/asm/ptrace.h new file mode 100644 index 0000000..8f73b31 --- /dev/null +++ b/arch/arc/include/asm/ptrace.h @@ -0,0 +1,50 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_PTRACE_H +#define __ASM_ARC_PTRACE_H + +struct pt_regs { + long bta; + long lp_start; + long lp_end; + long lp_count; + long status32; + long ret; + long blink; + long fp; + long r26; /* gp */ + long r25; + long r24; + long r23; + long r22; + long r21; + long r20; + long r19; + long r18; + long r17; + long r16; + long r15; + long r14; + long r13; + long r12; + long r11; + long r10; + long r9; + long r8; + long r7; + long r6; + long r5; + long r4; + long r3; + long r2; + long r1; + long r0; + long sp; + long ecr; +}; + +#endif /* __ASM_ARC_PTRACE_H */ diff --git a/arch/arc/include/asm/sections.h b/arch/arc/include/asm/sections.h new file mode 100644 index 0000000..18484a1 --- /dev/null +++ b/arch/arc/include/asm/sections.h @@ -0,0 +1,14 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_SECTIONS_H +#define __ASM_ARC_SECTIONS_H + +#include <asm-generic/sections.h> + +extern ulong __text_end; + +#endif /* __ASM_ARC_SECTIONS_H */ diff --git a/arch/arc/include/asm/string.h b/arch/arc/include/asm/string.h new file mode 100644 index 0000000..909129c --- /dev/null +++ b/arch/arc/include/asm/string.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_STRING_H +#define __ASM_ARC_STRING_H + +#define __HAVE_ARCH_MEMSET +#define __HAVE_ARCH_MEMCPY +#define __HAVE_ARCH_MEMCMP +#define __HAVE_ARCH_STRCHR +#define __HAVE_ARCH_STRCPY +#define __HAVE_ARCH_STRCMP +#define __HAVE_ARCH_STRLEN + +extern void *memset(void *ptr, int, __kernel_size_t); +extern void *memcpy(void *, const void *, __kernel_size_t); +extern void memzero(void *ptr, __kernel_size_t n); +extern int memcmp(const void *, const void *, __kernel_size_t); +extern char *strchr(const char *s, int c); +extern char *strcpy(char *dest, const char *src); +extern int strcmp(const char *cs, const char *ct); +extern __kernel_size_t strlen(const char *); + +#endif /* __ASM_ARC_STRING_H */ diff --git a/arch/arc/include/asm/types.h b/arch/arc/include/asm/types.h new file mode 100644 index 0000000..24eeb76 --- /dev/null +++ b/arch/arc/include/asm/types.h @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_TYPES_H +#define __ASM_ARC_TYPES_H + +typedef unsigned short umode_t; + +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +typedef __signed__ long long __s64; +typedef unsigned long long __u64; +#endif + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +typedef signed char s8; +typedef unsigned char u8; + +typedef signed short s16; +typedef unsigned short u16; + +typedef signed int s32; +typedef unsigned int u32; + +typedef signed long long s64; +typedef unsigned long long u64; + +#define BITS_PER_LONG 32 + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +typedef unsigned long phys_addr_t; +typedef unsigned long phys_size_t; + +#endif /* __ASM_ARC_TYPES_H */ diff --git a/arch/arc/include/asm/u-boot-arc.h b/arch/arc/include/asm/u-boot-arc.h new file mode 100644 index 0000000..0c0e8e6 --- /dev/null +++ b/arch/arc/include/asm/u-boot-arc.h @@ -0,0 +1,12 @@ +/* + * Copyright (C) 2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_U_BOOT_ARC_H__ +#define __ASM_ARC_U_BOOT_ARC_H__ + +int arch_early_init_r(void); + +#endif /* __ASM_ARC_U_BOOT_ARC_H__ */ diff --git a/arch/arc/include/asm/u-boot.h b/arch/arc/include/asm/u-boot.h new file mode 100644 index 0000000..e354edf --- /dev/null +++ b/arch/arc/include/asm/u-boot.h @@ -0,0 +1,15 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_ARC_U_BOOT_H__ +#define __ASM_ARC_U_BOOT_H__ + +#include <asm-generic/u-boot.h> + +/* For image.h:image_check_target_arch() */ +#define IH_ARCH_DEFAULT IH_ARCH_ARC + +#endif /* __ASM_ARC_U_BOOT_H__ */ diff --git a/arch/arc/include/asm/unaligned.h b/arch/arc/include/asm/unaligned.h new file mode 100644 index 0000000..6cecbbb --- /dev/null +++ b/arch/arc/include/asm/unaligned.h @@ -0,0 +1 @@ +#include <asm-generic/unaligned.h> diff --git a/arch/arc/lib/Makefile b/arch/arc/lib/Makefile new file mode 100644 index 0000000..7675f85 --- /dev/null +++ b/arch/arc/lib/Makefile @@ -0,0 +1,16 @@ +# +# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += sections.o +obj-y += relocate.o +obj-y += strchr-700.o +obj-y += strcmp.o +obj-y += strcpy-700.o +obj-y += strlen.o +obj-y += memcmp.o +obj-y += memcpy-700.o +obj-y += memset.o +obj-$(CONFIG_CMD_BOOTM) += bootm.o diff --git a/arch/arc/lib/bootm.c b/arch/arc/lib/bootm.c new file mode 100644 index 0000000..d185a50 --- /dev/null +++ b/arch/arc/lib/bootm.c @@ -0,0 +1,106 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> + +DECLARE_GLOBAL_DATA_PTR; + +static ulong get_sp(void) +{ + ulong ret; + + asm("mov %0, sp" : "=r"(ret) : ); + return ret; +} + +void arch_lmb_reserve(struct lmb *lmb) +{ + ulong sp; + + /* + * Booting a (Linux) kernel image + * + * Allocate space for command line and board info - the + * address should be as high as possible within the reach of + * the kernel (see CONFIG_SYS_BOOTMAPSZ settings), but in unused + * memory, which means far enough below the current stack + * pointer. + */ + sp = get_sp(); + debug("## Current stack ends at 0x%08lx ", sp); + + /* adjust sp by 4K to be safe */ + sp -= 4096; + lmb_reserve(lmb, sp, (CONFIG_SYS_SDRAM_BASE + gd->ram_size - sp)); +} + +static int cleanup_before_linux(void) +{ + disable_interrupts(); + flush_dcache_all(); + invalidate_icache_all(); + + return 0; +} + +/* Subcommand: PREP */ +static void boot_prep_linux(bootm_headers_t *images) +{ + if (image_setup_linux(images)) + hang(); +} + +/* Subcommand: GO */ +static void boot_jump_linux(bootm_headers_t *images, int flag) +{ + void (*kernel_entry)(int zero, int arch, uint params); + unsigned int r0, r2; + int fake = (flag & BOOTM_STATE_OS_FAKE_GO); + + kernel_entry = (void (*)(int, int, uint))images->ep; + + debug("## Transferring control to Linux (at address %08lx)...\n", + (ulong) kernel_entry); + bootstage_mark(BOOTSTAGE_ID_RUN_OS); + + printf("\nStarting kernel ...%s\n\n", fake ? + "(fake run for tracing)" : ""); + bootstage_mark_name(BOOTSTAGE_ID_BOOTM_HANDOFF, "start_kernel"); + + cleanup_before_linux(); + + if (IMAGE_ENABLE_OF_LIBFDT && images->ft_len) { + r0 = 2; + r2 = (unsigned int)images->ft_addr; + } else { + r0 = 1; + r2 = (unsigned int)getenv("bootargs"); + } + + if (!fake) + kernel_entry(r0, 0, r2); +} + +int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images) +{ + /* No need for those on ARC */ + if ((flag & BOOTM_STATE_OS_BD_T) || (flag & BOOTM_STATE_OS_CMDLINE)) + return -1; + + if (flag & BOOTM_STATE_OS_PREP) { + boot_prep_linux(images); + return 0; + } + + if (flag & (BOOTM_STATE_OS_GO | BOOTM_STATE_OS_FAKE_GO)) { + boot_jump_linux(images, flag); + return 0; + } + + boot_prep_linux(images); + boot_jump_linux(images, flag); + return 0; +} diff --git a/arch/arc/lib/memcmp.S b/arch/arc/lib/memcmp.S new file mode 100644 index 0000000..fa5aac5 --- /dev/null +++ b/arch/arc/lib/memcmp.S @@ -0,0 +1,121 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifdef __LITTLE_ENDIAN__ +#define WORD2 r2 +#define SHIFT r3 +#else /* __BIG_ENDIAN__ */ +#define WORD2 r3 +#define SHIFT r2 +#endif /* _ENDIAN__ */ + +.global memcmp +.align 4 +memcmp: + or %r12, %r0, %r1 + asl_s %r12, %r12, 30 + sub %r3, %r2, 1 + brls %r2, %r12, .Lbytewise + ld %r4, [%r0, 0] + ld %r5, [%r1, 0] + lsr.f %lp_count, %r3, 3 + lpne .Loop_end + ld_s WORD2, [%r0, 4] + ld_s %r12, [%r1, 4] + brne %r4, %r5, .Leven + ld.a %r4, [%r0, 8] + ld.a %r5, [%r1, 8] + brne WORD2, %r12, .Lodd +.Loop_end: + asl_s SHIFT, SHIFT, 3 + bhs_s .Last_cmp + brne %r4, %r5, .Leven + ld %r4, [%r0, 4] + ld %r5, [%r1, 4] +#ifdef __LITTLE_ENDIAN__ + nop_s + /* one more load latency cycle */ +.Last_cmp: + xor %r0, %r4, %r5 + bset %r0, %r0, SHIFT + sub_s %r1, %r0, 1 + bic_s %r1, %r1, %r0 + norm %r1, %r1 + b.d .Leven_cmp + and %r1, %r1, 24 +.Leven: + xor %r0, %r4, %r5 + sub_s %r1, %r0, 1 + bic_s %r1, %r1, %r0 + norm %r1, %r1 + /* slow track insn */ + and %r1, %r1, 24 +.Leven_cmp: + asl %r2, %r4, %r1 + asl %r12, %r5, %r1 + lsr_s %r2, %r2, 1 + lsr_s %r12, %r12, 1 + j_s.d [%blink] + sub %r0, %r2, %r12 + .balign 4 +.Lodd: + xor %r0, WORD2, %r12 + sub_s %r1, %r0, 1 + bic_s %r1, %r1, %r0 + norm %r1, %r1 + /* slow track insn */ + and %r1, %r1, 24 + asl_s %r2, %r2, %r1 + asl_s %r12, %r12, %r1 + lsr_s %r2, %r2, 1 + lsr_s %r12, %r12, 1 + j_s.d [%blink] + sub %r0, %r2, %r12 +#else /* __BIG_ENDIAN__ */ +.Last_cmp: + neg_s SHIFT, SHIFT + lsr %r4, %r4, SHIFT + lsr %r5, %r5, SHIFT + /* slow track insn */ +.Leven: + sub.f %r0, %r4, %r5 + mov.ne %r0, 1 + j_s.d [%blink] + bset.cs %r0, %r0, 31 +.Lodd: + cmp_s WORD2, %r12 + + mov_s %r0, 1 + j_s.d [%blink] + bset.cs %r0, %r0, 31 +#endif /* _ENDIAN__ */ + .balign 4 +.Lbytewise: + breq %r2, 0, .Lnil + ldb %r4, [%r0, 0] + ldb %r5, [%r1, 0] + lsr.f %lp_count, %r3 + lpne .Lbyte_end + ldb_s %r3, [%r0, 1] + ldb %r12, [%r1, 1] + brne %r4, %r5, .Lbyte_even + ldb.a %r4, [%r0, 2] + ldb.a %r5, [%r1, 2] + brne %r3, %r12, .Lbyte_odd +.Lbyte_end: + bcc .Lbyte_even + brne %r4, %r5, .Lbyte_even + ldb_s %r3, [%r0, 1] + ldb_s %r12, [%r1, 1] +.Lbyte_odd: + j_s.d [%blink] + sub %r0, %r3, %r12 +.Lbyte_even: + j_s.d [%blink] + sub %r0, %r4, %r5 +.Lnil: + j_s.d [%blink] + mov %r0, 0 diff --git a/arch/arc/lib/memcpy-700.S b/arch/arc/lib/memcpy-700.S new file mode 100644 index 0000000..51dd73a --- /dev/null +++ b/arch/arc/lib/memcpy-700.S @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +.global memcpy +.align 4 +memcpy: + or %r3, %r0, %r1 + asl_s %r3, %r3, 30 + mov_s %r5, %r0 + brls.d %r2, %r3, .Lcopy_bytewise + sub.f %r3, %r2, 1 + ld_s %r12, [%r1, 0] + asr.f %lp_count, %r3, 3 + bbit0.d %r3, 2, .Lnox4 + bmsk_s %r2, %r2, 1 + st.ab %r12, [%r5, 4] + ld.a %r12, [%r1, 4] +.Lnox4: + lppnz .Lendloop + ld_s %r3, [%r1, 4] + st.ab %r12, [%r5, 4] + ld.a %r12, [%r1, 8] + st.ab %r3, [%r5, 4] +.Lendloop: + breq %r2, 0, .Last_store + ld %r3, [%r5, 0] +#ifdef __LITTLE_ENDIAN__ + add3 %r2, -1, %r2 + /* uses long immediate */ + xor_s %r12, %r12, %r3 + bmsk %r12, %r12, %r2 + xor_s %r12, %r12, %r3 +#else /* __BIG_ENDIAN__ */ + sub3 %r2, 31, %r2 + /* uses long immediate */ + xor_s %r3, %r3, %r12 + bmsk %r3, %r3, %r2 + xor_s %r12, %r12, %r3 +#endif /* _ENDIAN__ */ +.Last_store: + j_s.d [%blink] + st %r12, [%r5, 0] + + .balign 4 +.Lcopy_bytewise: + jcs [%blink] + ldb_s %r12, [%r1, 0] + lsr.f %lp_count, %r3 + bhs_s .Lnox1 + stb.ab %r12, [%r5, 1] + ldb.a %r12, [%r1, 1] +.Lnox1: + lppnz .Lendbloop + ldb_s %r3, [%r1, 1] + stb.ab %r12, [%r5, 1] + ldb.a %r12, [%r1, 2] + stb.ab %r3, [%r5, 1] +.Lendbloop: + j_s.d [%blink] + stb %r12, [%r5, 0] diff --git a/arch/arc/lib/memset.S b/arch/arc/lib/memset.S new file mode 100644 index 0000000..017e8af --- /dev/null +++ b/arch/arc/lib/memset.S @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#define SMALL 7 /* Must be at least 6 to deal with alignment/loop issues. */ + +.global memset +.align 4 +memset: + mov_s %r4, %r0 + or %r12, %r0, %r2 + bmsk.f %r12, %r12, 1 + extb_s %r1, %r1 + asl %r3, %r1, 8 + beq.d .Laligned + or_s %r1, %r1, %r3 + brls %r2, SMALL, .Ltiny + add %r3, %r2, %r0 + stb %r1, [%r3, -1] + bclr_s %r3, %r3, 0 + stw %r1, [%r3, -2] + bmsk.f %r12, %r0, 1 + add_s %r2, %r2, %r12 + sub.ne %r2, %r2, 4 + stb.ab %r1, [%r4, 1] + and %r4, %r4, -2 + stw.ab %r1, [%r4, 2] + and %r4, %r4, -4 + + .balign 4 +.Laligned: + asl %r3, %r1, 16 + lsr.f %lp_count, %r2, 2 + or_s %r1, %r1, %r3 + lpne .Loop_end + st.ab %r1, [%r4, 4] +.Loop_end: + j_s [%blink] + + .balign 4 +.Ltiny: + mov.f %lp_count, %r2 + lpne .Ltiny_end + stb.ab %r1, [%r4, 1] +.Ltiny_end: + j_s [%blink] + +/* + * memzero: @r0 = mem, @r1 = size_t + * memset: @r0 = mem, @r1 = char, @r2 = size_t + */ + +.global memzero +.align 4 +memzero: + /* adjust bzero args to memset args */ + mov %r2, %r1 + mov %r1, 0 + /* tail call so need to tinker with blink */ + b memset diff --git a/arch/arc/lib/relocate.c b/arch/arc/lib/relocate.c new file mode 100644 index 0000000..956aa14 --- /dev/null +++ b/arch/arc/lib/relocate.c @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <elf.h> +#include <asm/sections.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Base functionality is taken from x86 version with added ARC-specifics + */ +int do_elf_reloc_fixups(void) +{ + Elf32_Rela *re_src = (Elf32_Rela *)(&__rel_dyn_start); + Elf32_Rela *re_end = (Elf32_Rela *)(&__rel_dyn_end); + + Elf32_Addr *offset_ptr_rom, *last_offset = NULL; + Elf32_Addr *offset_ptr_ram; + + do { + /* Get the location from the relocation entry */ + offset_ptr_rom = (Elf32_Addr *)re_src->r_offset; + + /* Check that the location of the relocation is in .text */ + if (offset_ptr_rom >= (Elf32_Addr *)CONFIG_SYS_TEXT_BASE && + offset_ptr_rom > last_offset) { + unsigned int val; + /* Switch to the in-RAM version */ + offset_ptr_ram = (Elf32_Addr *)((ulong)offset_ptr_rom + + gd->reloc_off); + + /* + * Use "memcpy" because target location might be + * 16-bit aligned on ARC so we may need to read + * byte-by-byte. On attempt to read entire word by + * CPU throws an exception + */ + memcpy(&val, offset_ptr_ram, sizeof(int)); + + /* If location in ".text" section swap value */ + if ((unsigned int)offset_ptr_rom < + (unsigned int)&__text_end) + val = (val << 16) | (val >> 16); + + /* Check that the target points into .text */ + if (val >= CONFIG_SYS_TEXT_BASE && val <= + (unsigned int)&__bss_end) { + val += gd->reloc_off; + /* If location in ".text" section swap value */ + if ((unsigned int)offset_ptr_rom < + (unsigned int)&__text_end) + val = (val << 16) | (val >> 16); + memcpy(offset_ptr_ram, &val, sizeof(int)); + } else { + debug(" %p: rom reloc %x, ram %p, value %x, limit %x\n", + re_src, re_src->r_offset, offset_ptr_ram, + val, (unsigned int)&__bss_end); + } + } else { + debug(" %p: rom reloc %x, last %p\n", re_src, + re_src->r_offset, last_offset); + } + last_offset = offset_ptr_rom; + + } while (++re_src < re_end); + + return 0; +} diff --git a/arch/arc/lib/sections.c b/arch/arc/lib/sections.c new file mode 100644 index 0000000..b0b46a4 --- /dev/null +++ b/arch/arc/lib/sections.c @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * For some reason linker sets linker-generated symbols to zero in PIE mode. + * A work-around is substitution of linker-generated symbols with + * compiler-generated symbols which are properly handled by linker in PAE mode. + */ + +char __bss_start[0] __attribute__((section(".__bss_start"))); +char __bss_end[0] __attribute__((section(".__bss_end"))); +char __image_copy_start[0] __attribute__((section(".__image_copy_start"))); +char __image_copy_end[0] __attribute__((section(".__image_copy_end"))); +char __rel_dyn_start[0] __attribute__((section(".__rel_dyn_start"))); +char __rel_dyn_end[0] __attribute__((section(".__rel_dyn_end"))); +char __text_start[0] __attribute__((section(".__text_start"))); +char __text_end[0] __attribute__((section(".__text_end"))); +char __init_end[0] __attribute__((section(".__init_end"))); diff --git a/arch/arc/lib/strchr-700.S b/arch/arc/lib/strchr-700.S new file mode 100644 index 0000000..55fcc9f --- /dev/null +++ b/arch/arc/lib/strchr-700.S @@ -0,0 +1,141 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * ARC700 has a relatively long pipeline and branch prediction, so we want + * to avoid branches that are hard to predict. On the other hand, the + * presence of the norm instruction makes it easier to operate on whole + * words branch-free. + */ + +.global strchr +.align 4 +strchr: + extb_s %r1, %r1 + asl %r5, %r1, 8 + bmsk %r2, %r0, 1 + or %r5, %r5, %r1 + mov_s %r3, 0x01010101 + breq.d %r2, %r0, .Laligned + asl %r4, %r5, 16 + sub_s %r0, %r0, %r2 + asl %r7, %r2, 3 + ld_s %r2, [%r0] +#ifdef __LITTLE_ENDIAN__ + asl %r7, %r3, %r7 +#else /* __BIG_ENDIAN__ */ + lsr %r7, %r3, %r7 +#endif /* _ENDIAN__ */ + or %r5, %r5, %r4 + ror %r4, %r3 + sub %r12, %r2, %r7 + bic_s %r12, %r12, %r2 + and %r12, %r12, %r4 + brne.d %r12, 0, .Lfound0_ua + xor %r6, %r2, %r5 + ld.a %r2, [%r0, 4] + sub %r12, %r6, %r7 + bic %r12, %r12, %r6 +#ifdef __LITTLE_ENDIAN__ + and %r7, %r12, %r4 + /* For speed, we want this branch to be unaligned. */ + breq %r7, 0, .Loop + /* Likewise this one */ + b .Lfound_char +#else /* __BIG_ENDIAN__ */ + and %r12, %r12, %r4 + /* For speed, we want this branch to be unaligned. */ + breq %r12, 0, .Loop + lsr_s %r12, %r12, 7 + bic %r2, %r7, %r6 + b.d .Lfound_char_b + and_s %r2, %r2, %r12 +#endif /* _ENDIAN__ */ + /* We require this code address to be unaligned for speed... */ +.Laligned: + ld_s %r2, [%r0] + or %r5, %r5, %r4 + ror %r4, %r3 + /* ... so that this code address is aligned, for itself and ... */ +.Loop: + sub %r12, %r2, %r3 + bic_s %r12, %r12, %r2 + and %r12, %r12, %r4 + brne.d %r12, 0, .Lfound0 + xor %r6, %r2, %r5 + ld.a %r2, [%r0, 4] + sub %r12, %r6, %r3 + bic %r12, %r12, %r6 + and %r7, %r12, %r4 + breq %r7, 0, .Loop + /* + *... so that this branch is unaligned. + * Found searched-for character. + * r0 has already advanced to next word. + */ +#ifdef __LITTLE_ENDIAN__ + /* + * We only need the information about the first matching byte + * (i.e. the least significant matching byte) to be exact, + * hence there is no problem with carry effects. + */ +.Lfound_char: + sub %r3, %r7, 1 + bic %r3, %r3, %r7 + norm %r2, %r3 + sub_s %r0, %r0, 1 + asr_s %r2, %r2, 3 + j.d [%blink] + sub_s %r0, %r0, %r2 + + .balign 4 +.Lfound0_ua: + mov %r3, %r7 +.Lfound0: + sub %r3, %r6, %r3 + bic %r3, %r3, %r6 + and %r2, %r3, %r4 + or_s %r12, %r12, %r2 + sub_s %r3, %r12, 1 + bic_s %r3, %r3, %r12 + norm %r3, %r3 + add_s %r0, %r0, 3 + asr_s %r12, %r3, 3 + asl.f 0, %r2, %r3 + sub_s %r0, %r0, %r12 + j_s.d [%blink] + mov.pl %r0, 0 +#else /* __BIG_ENDIAN__ */ +.Lfound_char: + lsr %r7, %r7, 7 + + bic %r2, %r7, %r6 +.Lfound_char_b: + norm %r2, %r2 + sub_s %r0, %r0, 4 + asr_s %r2, %r2, 3 + j.d [%blink] + add_s %r0, %r0, %r2 + +.Lfound0_ua: + mov_s %r3, %r7 +.Lfound0: + asl_s %r2, %r2, 7 + or %r7, %r6, %r4 + bic_s %r12, %r12, %r2 + sub %r2, %r7, %r3 + or %r2, %r2, %r6 + bic %r12, %r2, %r12 + bic.f %r3, %r4, %r12 + norm %r3, %r3 + + add.pl %r3, %r3, 1 + asr_s %r12, %r3, 3 + asl.f 0, %r2, %r3 + add_s %r0, %r0, %r12 + j_s.d [%blink] + mov.mi %r0, 0 +#endif /* _ENDIAN__ */ diff --git a/arch/arc/lib/strcmp.S b/arch/arc/lib/strcmp.S new file mode 100644 index 0000000..8cb7d2f --- /dev/null +++ b/arch/arc/lib/strcmp.S @@ -0,0 +1,97 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * This is optimized primarily for the ARC700. + * It would be possible to speed up the loops by one cycle / word + * respective one cycle / byte by forcing double source 1 alignment, unrolling + * by a factor of two, and speculatively loading the second word / byte of + * source 1; however, that would increase the overhead for loop setup / finish, + * and strcmp might often terminate early. + */ + +.global strcmp +.align 4 +strcmp: + or %r2, %r0, %r1 + bmsk_s %r2, %r2, 1 + brne %r2, 0, .Lcharloop + mov_s %r12, 0x01010101 + ror %r5, %r12 +.Lwordloop: + ld.ab %r2, [%r0, 4] + ld.ab %r3, [%r1, 4] + nop_s + sub %r4, %r2, %r12 + bic %r4, %r4, %r2 + and %r4, %r4, %r5 + brne %r4, 0, .Lfound0 + breq %r2 ,%r3, .Lwordloop +#ifdef __LITTLE_ENDIAN__ + xor %r0, %r2, %r3 /* mask for difference */ + sub_s %r1, %r0, 1 + bic_s %r0, %r0, %r1 /* mask for least significant difference bit */ + sub %r1, %r5, %r0 + xor %r0, %r5, %r1 /* mask for least significant difference byte */ + and_s %r2, %r2, %r0 + and_s %r3, %r3, %r0 +#endif /* _ENDIAN__ */ + cmp_s %r2, %r3 + mov_s %r0, 1 + j_s.d [%blink] + bset.lo %r0, %r0, 31 + + .balign 4 +#ifdef __LITTLE_ENDIAN__ +.Lfound0: + xor %r0, %r2, %r3 /* mask for difference */ + or %r0, %r0, %r4 /* or in zero indicator */ + sub_s %r1, %r0, 1 + bic_s %r0, %r0, %r1 /* mask for least significant difference bit */ + sub %r1, %r5, %r0 + xor %r0, %r5, %r1 /* mask for least significant difference byte */ + and_s %r2, %r2, %r0 + and_s %r3, %r3, %r0 + sub.f %r0, %r2, %r3 + mov.hi %r0, 1 + j_s.d [%blink] + bset.lo %r0, %r0, 31 +#else /* __BIG_ENDIAN__ */ + /* + * The zero-detection above can mis-detect 0x01 bytes as zeroes + * because of carry-propagateion from a lower significant zero byte. + * We can compensate for this by checking that bit0 is zero. + * This compensation is not necessary in the step where we + * get a low estimate for r2, because in any affected bytes + * we already have 0x00 or 0x01, which will remain unchanged + * when bit 7 is cleared. + */ + .balign 4 +.Lfound0: + lsr %r0, %r4, 8 + lsr_s %r1, %r2 + bic_s %r2, %r2, %r0 /* get low estimate for r2 and get ... */ + bic_s %r0, %r0, %r1 /* <this is the adjusted mask for zeros> */ + or_s %r3, %r3, %r0 /* ... high estimate r3 so that r2 > r3 will */ + cmp_s %r3, %r2 /* ... be independent of trailing garbage */ + or_s %r2, %r2, %r0 /* likewise for r3 > r2 */ + bic_s %r3, %r3, %r0 + rlc %r0, 0 /* r0 := r2 > r3 ? 1 : 0 */ + cmp_s %r2, %r3 + j_s.d [%blink] + bset.lo %r0, %r0, 31 +#endif /* _ENDIAN__ */ + + .balign 4 +.Lcharloop: + ldb.ab %r2,[%r0,1] + ldb.ab %r3,[%r1,1] + nop_s + breq %r2, 0, .Lcmpend + breq %r2, %r3, .Lcharloop +.Lcmpend: + j_s.d [%blink] + sub %r0, %r2, %r3 diff --git a/arch/arc/lib/strcpy-700.S b/arch/arc/lib/strcpy-700.S new file mode 100644 index 0000000..41bb53e --- /dev/null +++ b/arch/arc/lib/strcpy-700.S @@ -0,0 +1,67 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * If dst and src are 4 byte aligned, copy 8 bytes at a time. + * If the src is 4, but not 8 byte aligned, we first read 4 bytes to get + * it 8 byte aligned. Thus, we can do a little read-ahead, without + * dereferencing a cache line that we should not touch. + * Note that short and long instructions have been scheduled to avoid + * branch stalls. + * The beq_s to r3z could be made unaligned & long to avoid a stall + * there, but it is not likely to be taken often, and it would also be likely + * to cost an unaligned mispredict at the next call. + */ + +.global strcpy +.align 4 +strcpy: + or %r2, %r0, %r1 + bmsk_s %r2, %r2, 1 + brne.d %r2, 0, charloop + mov_s %r10, %r0 + ld_s %r3, [%r1, 0] + mov %r8, 0x01010101 + bbit0.d %r1, 2, loop_start + ror %r12, %r8 + sub %r2, %r3, %r8 + bic_s %r2, %r2, %r3 + tst_s %r2,%r12 + bne r3z + mov_s %r4,%r3 + .balign 4 +loop: + ld.a %r3, [%r1, 4] + st.ab %r4, [%r10, 4] +loop_start: + ld.a %r4, [%r1, 4] + sub %r2, %r3, %r8 + bic_s %r2, %r2, %r3 + tst_s %r2, %r12 + bne_s r3z + st.ab %r3, [%r10, 4] + sub %r2, %r4, %r8 + bic %r2, %r2, %r4 + tst %r2, %r12 + beq loop + mov_s %r3, %r4 +#ifdef __LITTLE_ENDIAN__ +r3z: bmsk.f %r1, %r3, 7 + lsr_s %r3, %r3, 8 +#else /* __BIG_ENDIAN__ */ +r3z: lsr.f %r1, %r3, 24 + asl_s %r3, %r3, 8 +#endif /* _ENDIAN__ */ + bne.d r3z + stb.ab %r1, [%r10, 1] + j_s [%blink] + + .balign 4 +charloop: + ldb.ab %r3, [%r1, 1] + brne.d %r3, 0, charloop + stb.ab %r3, [%r10, 1] + j [%blink] diff --git a/arch/arc/lib/strlen.S b/arch/arc/lib/strlen.S new file mode 100644 index 0000000..666e22c --- /dev/null +++ b/arch/arc/lib/strlen.S @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2004, 2007-2010, 2011-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +.global strlen +.align 4 +strlen: + or %r3, %r0, 7 + ld %r2, [%r3, -7] + ld.a %r6, [%r3, -3] + mov %r4, 0x01010101 + /* uses long immediate */ +#ifdef __LITTLE_ENDIAN__ + asl_s %r1, %r0, 3 + btst_s %r0, 2 + asl %r7, %r4, %r1 + ror %r5, %r4 + sub %r1, %r2, %r7 + bic_s %r1, %r1, %r2 + mov.eq %r7, %r4 + sub %r12, %r6, %r7 + bic %r12, %r12, %r6 + or.eq %r12, %r12, %r1 + and %r12, %r12, %r5 + brne %r12, 0, .Learly_end +#else /* __BIG_ENDIAN__ */ + ror %r5, %r4 + btst_s %r0, 2 + mov_s %r1, 31 + sub3 %r7, %r1, %r0 + sub %r1, %r2, %r4 + bic_s %r1, %r1, %r2 + bmsk %r1, %r1, %r7 + sub %r12, %r6, %r4 + bic %r12, %r12, %r6 + bmsk.ne %r12, %r12, %r7 + or.eq %r12, %r12, %r1 + and %r12, %r12, %r5 + brne %r12, 0, .Learly_end +#endif /* _ENDIAN__ */ + +.Loop: + ld_s %r2, [%r3, 4] + ld.a %r6, [%r3, 8] + /* stall for load result */ + sub %r1, %r2, %r4 + bic_s %r1, %r1, %r2 + sub %r12, %r6, %r4 + bic %r12, %r12, %r6 + or %r12, %r12, %r1 + and %r12, %r12, %r5 + breq %r12, 0, .Loop +.Lend: + and.f %r1, %r1, %r5 + sub.ne %r3, %r3, 4 + mov.eq %r1, %r12 +#ifdef __LITTLE_ENDIAN__ + sub_s %r2, %r1, 1 + bic_s %r2, %r2, %r1 + norm %r1, %r2 + sub_s %r0, %r0, 3 + lsr_s %r1, %r1, 3 + sub %r0, %r3, %r0 + j_s.d [%blink] + sub %r0, %r0, %r1 +#else /* __BIG_ENDIAN__ */ + lsr_s %r1, %r1, 7 + mov.eq %r2, %r6 + bic_s %r1, %r1, %r2 + norm %r1, %r1 + sub %r0, %r3, %r0 + lsr_s %r1, %r1, 3 + j_s.d [%blink] + add %r0, %r0, %r1 +#endif /* _ENDIAN */ +.Learly_end: + b.d .Lend + sub_s.ne %r1, %r1, %r1 diff --git a/arch/blackfin/cpu/initcode.h b/arch/blackfin/cpu/initcode.h index 1fec7f3..ab7fa45 100644 --- a/arch/blackfin/cpu/initcode.h +++ b/arch/blackfin/cpu/initcode.h @@ -49,7 +49,7 @@ program_async_controller(ADI_BOOT_DATA *bs) serial_putc('a'); -#ifdef __ADSPBF60x__ +#ifndef __ADSPBF60x__ /* Program the async banks controller. */ #ifdef EBIU_AMGCTL bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL); @@ -74,7 +74,7 @@ program_async_controller(ADI_BOOT_DATA *bs) serial_putc('c'); -#else /* __ADSPBF60x__ */ +#else /* __ADSPBF60x__ */ /* Program the static memory controller. */ # ifdef CONFIG_SMC_GCTL_VAL bfin_write_SMC_GCTL(CONFIG_SMC_GCTL_VAL); @@ -116,7 +116,7 @@ program_async_controller(ADI_BOOT_DATA *bs) bfin_write_SMC_B3ETIM(CONFIG_SMC_B3ETIM_VAL); # endif -#endif +#endif /* __ADSPBF60x__ */ serial_putc('d'); } diff --git a/arch/blackfin/cpu/start.S b/arch/blackfin/cpu/start.S index c99cf49..29a7c23 100644 --- a/arch/blackfin/cpu/start.S +++ b/arch/blackfin/cpu/start.S @@ -190,6 +190,7 @@ ENTRY(_start) call _memcpy_ASM; #endif +.Lnorelocate: /* Initialize BSS section ... we know that memset() does not * use the BSS, so it is safe to call here. The bootrom LDR * takes care of clearing things for us. @@ -202,7 +203,6 @@ ENTRY(_start) r2.h = __bss_len; call _memset; -.Lnorelocate: /* Setup the actual stack in external memory */ sp.h = HI(CONFIG_STACKBASE); diff --git a/arch/blackfin/include/asm/mach-common/bits/emac.h b/arch/blackfin/include/asm/mach-common/bits/emac.h index 7a43bbb..4c9bc9d 100644 --- a/arch/blackfin/include/asm/mach-common/bits/emac.h +++ b/arch/blackfin/include/asm/mach-common/bits/emac.h @@ -217,4 +217,7 @@ #define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */ #define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */ +/*default value for EMAC_VLANx reg*/ +#define EMAC_VLANX_DEF_VAL 0xFFFF + #endif diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index 392d72d..facbc7a 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -142,7 +142,8 @@ void init_cplbtables(void) ++i; #if defined(__ADSPBF60x__) icplb_add(0x0, 0x0); - dcplb_add(CONFIG_SYS_FLASH_BASE, SDRAM_EBIU); + dcplb_add(CONFIG_SYS_FLASH_BASE, PAGE_SIZE_16MB | CPLB_DIRTY | + CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID); ++i; #endif diff --git a/board/bf609-ezkit/bf609-ezkit.c b/board/bf609-ezkit/bf609-ezkit.c index cfc64fe..43a4330 100644 --- a/board/bf609-ezkit/bf609-ezkit.c +++ b/board/bf609-ezkit/bf609-ezkit.c @@ -41,12 +41,12 @@ int board_eth_init(bd_t *bis) if (CONFIG_DW_PORTS & 1) { static const unsigned short pins[] = P_RMII0; if (!peripheral_request_list(pins, "emac0")) - ret += designware_initialize(0, EMAC0_MACCFG, 1, 0); + ret += designware_initialize(EMAC0_MACCFG, 0); } if (CONFIG_DW_PORTS & 2) { static const unsigned short pins[] = P_RMII1; if (!peripheral_request_list(pins, "emac1")) - ret += designware_initialize(1, EMAC1_MACCFG, 1, 0); + ret += designware_initialize(EMAC1_MACCFG, 0); } return ret; diff --git a/board/spear/spear300/spear300.c b/board/spear/spear300/spear300.c index e25aba2..6b6bd9f 100644 --- a/board/spear/spear300/spear300.c +++ b/board/spear/spear300/spear300.c @@ -53,8 +53,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_DESIGNWARE_ETH) u32 interface = PHY_INTERFACE_MODE_MII; - if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY, - interface) >= 0) + if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0) ret++; #endif return ret; diff --git a/board/spear/spear310/spear310.c b/board/spear/spear310/spear310.c index 70f9aa1..a4c6a8e 100644 --- a/board/spear/spear310/spear310.c +++ b/board/spear/spear310/spear310.c @@ -54,8 +54,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_DESIGNWARE_ETH) u32 interface = PHY_INTERFACE_MODE_MII; - if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY, - interface) >= 0) + if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0) ret++; #endif #if defined(CONFIG_MACB) diff --git a/board/spear/spear320/spear320.c b/board/spear/spear320/spear320.c index f6b1fdd..ab732a7 100644 --- a/board/spear/spear320/spear320.c +++ b/board/spear/spear320/spear320.c @@ -65,8 +65,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_DESIGNWARE_ETH) u32 interface = PHY_INTERFACE_MODE_MII; - if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY, - interface) >= 0) + if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0) ret++; #endif #if defined(CONFIG_MACB) diff --git a/board/spear/spear600/spear600.c b/board/spear/spear600/spear600.c index e996a0e..8472002 100644 --- a/board/spear/spear600/spear600.c +++ b/board/spear/spear600/spear600.c @@ -51,8 +51,7 @@ int board_eth_init(bd_t *bis) #if defined(CONFIG_DW_AUTONEG) interface = PHY_INTERFACE_MODE_GMII; #endif - if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_DW0_PHY, - interface) >= 0) + if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0) ret++; #endif return ret; diff --git a/board/spear/x600/x600.c b/board/spear/x600/x600.c index 044d204..b8edfcd 100644 --- a/board/spear/x600/x600.c +++ b/board/spear/x600/x600.c @@ -67,31 +67,32 @@ void board_nand_init(void) fsmc_nand_init(nand); } -int designware_board_phy_init(struct eth_device *dev, int phy_addr, - int (*mii_write)(struct eth_device *, u8, u8, u16), - int dw_reset_phy(struct eth_device *)) +int board_phy_config(struct phy_device *phydev) { /* Extended PHY control 1, select GMII */ - mii_write(dev, phy_addr, 23, 0x0020); + phy_write(phydev, MDIO_DEVAD_NONE, 23, 0x0020); /* Software reset necessary after GMII mode selction */ - dw_reset_phy(dev); + phy_reset(phydev); /* Enable extended page register access */ - mii_write(dev, phy_addr, 31, 0x0001); + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0001); /* 17e: Enhanced LED behavior, needs to be written twice */ - mii_write(dev, phy_addr, 17, 0x09ff); - mii_write(dev, phy_addr, 17, 0x09ff); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x09ff); + phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x09ff); /* 16e: Enhanced LED method select */ - mii_write(dev, phy_addr, 16, 0xe0ea); + phy_write(phydev, MDIO_DEVAD_NONE, 16, 0xe0ea); /* Disable extended page register access */ - mii_write(dev, phy_addr, 31, 0x0000); + phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0000); /* Enable clock output pin */ - mii_write(dev, phy_addr, 18, 0x0049); + phy_write(phydev, MDIO_DEVAD_NONE, 18, 0x0049); + + if (phydev->drv->config) + phydev->drv->config(phydev); return 0; } @@ -100,7 +101,7 @@ int board_eth_init(bd_t *bis) { int ret = 0; - if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_PHY_ADDR, + if (designware_initialize(CONFIG_SPEAR_ETHBASE, PHY_INTERFACE_MODE_GMII) >= 0) ret++; diff --git a/board/synopsys/arcangel4/Makefile b/board/synopsys/arcangel4/Makefile new file mode 100644 index 0000000..575e58f --- /dev/null +++ b/board/synopsys/arcangel4/Makefile @@ -0,0 +1,11 @@ +# +# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +# This board is mostly used for debugging U-Boot in simulation (ISS). +# The only peripheral which is used on this board is a serial port which +# requires no initialization except those in "include/configs/arcangel4.h". +# And now there's no specific initializations for this board. +# So this Makefile is only required for satisfaction of U-Boot build system. diff --git a/board/synopsys/axs101/Makefile b/board/synopsys/axs101/Makefile new file mode 100644 index 0000000..f0965f7 --- /dev/null +++ b/board/synopsys/axs101/Makefile @@ -0,0 +1,8 @@ +# +# Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += axs101.o +obj-$(CONFIG_CMD_NAND) += nand.o diff --git a/board/synopsys/axs101/axs101.c b/board/synopsys/axs101/axs101.c new file mode 100644 index 0000000..4dbeaea --- /dev/null +++ b/board/synopsys/axs101/axs101.c @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <dwmmc.h> +#include <malloc.h> +#include <netdev.h> +#include <phy.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_mmc_init(bd_t *bis) +{ + struct dwmci_host *host = NULL; + + host = malloc(sizeof(struct dwmci_host)); + if (!host) { + printf("dwmci_host malloc fail!\n"); + return 1; + } + + memset(host, 0, sizeof(struct dwmci_host)); + host->name = "Synopsys Mobile storage"; + host->ioaddr = (void *)ARC_DWMMC_BASE; + host->buswidth = 4; + host->dev_index = 0; + host->bus_hz = 25000000; + + add_dwmci(host, 52000000, 400000); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + if (designware_initialize(0, ARC_DWGMAC_BASE, 0, + PHY_INTERFACE_MODE_RGMII) >= 0) + return 1; + + return 0; +} diff --git a/board/synopsys/axs101/nand.c b/board/synopsys/axs101/nand.c new file mode 100644 index 0000000..8672803 --- /dev/null +++ b/board/synopsys/axs101/nand.c @@ -0,0 +1,226 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <bouncebuf.h> +#include <common.h> +#include <malloc.h> +#include <nand.h> +#include <asm/io.h> + +#define BUS_WIDTH 8 /* AXI data bus width in bytes */ + +/* DMA buffer descriptor bits & masks */ +#define BD_STAT_OWN (1 << 31) +#define BD_STAT_BD_FIRST (1 << 3) +#define BD_STAT_BD_LAST (1 << 2) +#define BD_SIZES_BUFFER1_MASK 0xfff + +#define BD_STAT_BD_COMPLETE (BD_STAT_BD_FIRST | BD_STAT_BD_LAST) + +/* Controller command flags */ +#define B_WFR (1 << 19) /* 1b - Wait for ready */ +#define B_LC (1 << 18) /* 1b - Last cycle */ +#define B_IWC (1 << 13) /* 1b - Interrupt when complete */ + +/* NAND cycle types */ +#define B_CT_ADDRESS (0x0 << 16) /* Address operation */ +#define B_CT_COMMAND (0x1 << 16) /* Command operation */ +#define B_CT_WRITE (0x2 << 16) /* Write operation */ +#define B_CT_READ (0x3 << 16) /* Write operation */ + +enum nand_isr_t { + NAND_ISR_DATAREQUIRED = 0, + NAND_ISR_TXUNDERFLOW, + NAND_ISR_TXOVERFLOW, + NAND_ISR_DATAAVAILABLE, + NAND_ISR_RXUNDERFLOW, + NAND_ISR_RXOVERFLOW, + NAND_ISR_TXDMACOMPLETE, + NAND_ISR_RXDMACOMPLETE, + NAND_ISR_DESCRIPTORUNAVAILABLE, + NAND_ISR_CMDDONE, + NAND_ISR_CMDAVAILABLE, + NAND_ISR_CMDERROR, + NAND_ISR_DATATRANSFEROVER, + NAND_ISR_NONE +}; + +enum nand_regs_t { + AC_FIFO = 0, /* address and command fifo */ + IDMAC_BDADDR = 0x18, /* idmac descriptor list base address */ + INT_STATUS = 0x118, /* interrupt status register */ + INT_CLR_STATUS = 0x120, /* interrupt clear status register */ +}; + +struct nand_bd { + uint32_t status; /* DES0 */ + uint32_t sizes; /* DES1 */ + uint32_t buffer_ptr0; /* DES2 */ + uint32_t buffer_ptr1; /* DES3 */ +}; + +#define NAND_REG_WRITE(r, v) writel(v, CONFIG_SYS_NAND_BASE + r) +#define NAND_REG_READ(r) readl(CONFIG_SYS_NAND_BASE + r) + +static struct nand_bd *bd; /* DMA buffer descriptors */ + +/** + * axs101_nand_write_buf - write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static uint32_t nand_flag_is_set(uint32_t flag) +{ + uint32_t reg = NAND_REG_READ(INT_STATUS); + + if (reg & (1 << NAND_ISR_CMDERROR)) + return 0; + + if (reg & (1 << flag)) { + NAND_REG_WRITE(INT_CLR_STATUS, 1 << flag); + return 1; + } + + return 0; +} + +/** + * axs101_nand_write_buf - write buffer to chip + * @mtd: MTD device structure + * @buf: data buffer + * @len: number of bytes to write + */ +static void axs101_nand_write_buf(struct mtd_info *mtd, const u_char *buf, + int len) +{ + struct bounce_buffer bbstate; + + bounce_buffer_start(&bbstate, (void *)buf, len, GEN_BB_READ); + + /* Setup buffer descriptor */ + writel(BD_STAT_OWN | BD_STAT_BD_COMPLETE, &bd->status); + writel(ALIGN(len, BUS_WIDTH) & BD_SIZES_BUFFER1_MASK, &bd->sizes); + writel(bbstate.bounce_buffer, &bd->buffer_ptr0); + writel(0, &bd->buffer_ptr1); + + /* Issue "write" command */ + NAND_REG_WRITE(AC_FIFO, B_CT_WRITE | B_WFR | B_IWC | B_LC | (len-1)); + + /* Wait for NAND command and DMA to complete */ + while (!nand_flag_is_set(NAND_ISR_CMDDONE)) + ; + while (!nand_flag_is_set(NAND_ISR_TXDMACOMPLETE)) + ; + + bounce_buffer_stop(&bbstate); +} + +/** + * axs101_nand_read_buf - read chip data into buffer + * @mtd: MTD device structure + * @buf: buffer to store data + * @len: number of bytes to read + */ +static void axs101_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + struct bounce_buffer bbstate; + + bounce_buffer_start(&bbstate, buf, len, GEN_BB_WRITE); + + /* Setup buffer descriptor */ + writel(BD_STAT_OWN | BD_STAT_BD_COMPLETE, &bd->status); + writel(ALIGN(len, BUS_WIDTH) & BD_SIZES_BUFFER1_MASK, &bd->sizes); + writel(bbstate.bounce_buffer, &bd->buffer_ptr0); + writel(0, &bd->buffer_ptr1); + + /* Issue "read" command */ + NAND_REG_WRITE(AC_FIFO, B_CT_READ | B_WFR | B_IWC | B_LC | (len - 1)); + + /* Wait for NAND command and DMA to complete */ + while (!nand_flag_is_set(NAND_ISR_CMDDONE)) + ; + while (!nand_flag_is_set(NAND_ISR_RXDMACOMPLETE)) + ; + + bounce_buffer_stop(&bbstate); +} + +/** + * axs101_nand_read_byte - read one byte from the chip + * @mtd: MTD device structure + */ +static u_char axs101_nand_read_byte(struct mtd_info *mtd) +{ + u8 byte; + + axs101_nand_read_buf(mtd, (uchar *)&byte, sizeof(byte)); + return byte; +} + +/** + * axs101_nand_read_word - read one word from the chip + * @mtd: MTD device structure + */ +static u16 axs101_nand_read_word(struct mtd_info *mtd) +{ + u16 word; + + axs101_nand_read_buf(mtd, (uchar *)&word, sizeof(word)); + return word; +} + +/** + * axs101_nand_hwcontrol - NAND control functions wrapper. + * @mtd: MTD device structure + * @cmd: Command + */ +static void axs101_nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, + unsigned int ctrl) +{ + if (cmd == NAND_CMD_NONE) + return; + + cmd = cmd & 0xff; + + switch (ctrl & (NAND_ALE | NAND_CLE)) { + /* Address */ + case NAND_ALE: + cmd |= B_CT_ADDRESS; + break; + + /* Command */ + case NAND_CLE: + cmd |= B_CT_COMMAND | B_WFR; + + break; + + default: + debug("%s: unknown ctrl %#x\n", __func__, ctrl); + } + + NAND_REG_WRITE(AC_FIFO, cmd | B_LC); + while (!nand_flag_is_set(NAND_ISR_CMDDONE)) + ; +} + +int board_nand_init(struct nand_chip *nand) +{ + bd = (struct nand_bd *)memalign(ARCH_DMA_MINALIGN, + sizeof(struct nand_bd)); + + /* Set buffer descriptor address in IDMAC */ + NAND_REG_WRITE(IDMAC_BDADDR, bd); + + nand->ecc.mode = NAND_ECC_SOFT; + nand->cmd_ctrl = axs101_nand_hwcontrol; + nand->read_byte = axs101_nand_read_byte; + nand->read_word = axs101_nand_read_word; + nand->write_buf = axs101_nand_write_buf; + nand->read_buf = axs101_nand_read_buf; + + return 0; +} @@ -1230,6 +1230,9 @@ Active sparc leon3 - gaisler - Active sparc leon3 - gaisler - gr_xc3s_1500 - - Active sparc leon3 - gaisler - grsim - - Active x86 x86 coreboot chromebook-x86 coreboot coreboot-x86 coreboot:SYS_TEXT_BASE=0x01110000 - +Active arc arc700 - synopsys - axs101 - Alexey Brodkin <abrodkin@synopsys.com> +Active arc arc700 - synopsys - arcangel4 - Alexey Brodkin <abrodkin@synopsys.com> +Active arc arc700 - synopsys arcangel4 arcangel4-be - Alexey Brodkin <abrodkin@synopsys.com> Orphan arm arm1136 mx31 - imx31_phycore imx31_phycore_eet imx31_phycore:IMX31_PHYCORE_EET (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de> Orphan arm arm1136 mx31 freescale - mx31ads - (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de> Orphan arm pxa - - - lubbock - (dead address) Kyle Harris <kharris@nexus-tech.net> diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 713de14..15119a7 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -517,6 +517,24 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return 0; } +#elif defined(CONFIG_ARC700) + +int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + bd_t *bd = gd->bd; + + print_num("mem start", bd->bi_memstart); + print_lnum("mem size", bd->bi_memsize); + +#if defined(CONFIG_CMD_NET) + print_eth(0); + printf("ip_addr = %s\n", getenv("ipaddr")); +#endif + printf("baudrate = %d bps\n", bd->bi_baudrate); + + return 0; +} + #else #error "a case for this architecture does not exist!" #endif diff --git a/common/image.c b/common/image.c index ae95c3f..9c6bec5 100644 --- a/common/image.c +++ b/common/image.c @@ -82,6 +82,7 @@ static const table_entry_t uimage_arch[] = { { IH_ARCH_OPENRISC, "or1k", "OpenRISC 1000",}, { IH_ARCH_SANDBOX, "sandbox", "Sandbox", }, { IH_ARCH_ARM64, "arm64", "AArch64", }, + { IH_ARCH_ARC, "arc", "ARC", }, { -1, "", "", }, }; diff --git a/doc/README.ARC b/doc/README.ARC new file mode 100644 index 0000000..5f414fb --- /dev/null +++ b/doc/README.ARC @@ -0,0 +1,27 @@ +Synopsys' DesignWare(r) ARC(r) Processors are a family of 32-bit CPUs +that SoC designers can optimize for a wide range of uses, from deeply embedded +to high-performance host applications. + +More information on ARC cores avaialble here: +http://www.synopsys.com/IP/ProcessorIP/ARCProcessors/Pages/default.aspx + +Designers can differentiate their products by using patented configuration +technology to tailor each ARC processor instance to meet specific performance, +power and area requirements. + +The DesignWare ARC processors are also extendable, allowing designers to add +their own custom instructions that dramatically increase performance. + +Synopsys' ARC processors have been used by over 170 customers worldwide who +collectively ship more than 1 billion ARC-based chips annually. + +All DesignWare ARC processors utilize a 16-/32-bit ISA that provides excellent +performance and code density for embedded and host SoC applications. + +The RISC microprocessors are synthesizable and can be implemented in any foundry +or process, and are supported by a complete suite of development tools. + +The ARC GNU toolchain with support for all ARC Processors can be downloaded +from here (available pre-built toolchains as well): + +https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases diff --git a/doc/README.designware_eth b/doc/README.designware_eth deleted file mode 100644 index 25ec6bd..0000000 --- a/doc/README.designware_eth +++ /dev/null @@ -1,25 +0,0 @@ -This driver supports Designware Ethernet Controller provided by Synopsis. - -The driver is enabled by CONFIG_DESIGNWARE_ETH. - -The driver has been developed and tested on SPEAr platforms. By default, the -MDIO interface works at 100/Full. #defining the below options in board -configuration file changes this behavior. - -Call an subroutine from respective board/.../board.c -designware_initialize(u32 id, ulong base_addr, u32 phy_addr); - -The various options suported by the driver are -1. CONFIG_DW_ALTDESCRIPTOR - Define this to use the Alternate/Enhanced Descriptor configurations. -1. CONFIG_DW_AUTONEG - Define this to autonegotiate with the host before proceeding with mac - level configuration. This obviates the definitions of CONFIG_DW_SPEED10M - and CONFIG_DW_DUPLEXHALF. -2. CONFIG_DW_SPEED10M - Define this to change the default behavior from 100Mbps to 10Mbps. -3. CONFIG_DW_DUPLEXHALF - Define this to change the default behavior from Full Duplex to Half. -4. CONFIG_DW_SEARCH_PHY - Define this to search the phy address. This would overwrite the value - passed as 3rd arg from designware_initialize routine. diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 0ffd59d..42e208c 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -259,6 +259,8 @@ static int bfin_miiphy_init(struct eth_device *dev, int *opmode) *opmode = 0; bfin_write_EMAC_MMC_CTL(RSTC | CROLL); + bfin_write_EMAC_VLAN1(EMAC_VLANX_DEF_VAL); + bfin_write_EMAC_VLAN2(EMAC_VLANX_DEF_VAL); /* Initialize the TX DMA channel registers */ bfin_write_DMA2_X_COUNT(0); diff --git a/drivers/net/designware.c b/drivers/net/designware.c index 22155b4..c45593b 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -17,7 +17,75 @@ #include <asm/io.h> #include "designware.h" -static int configure_phy(struct eth_device *dev); +#if !defined(CONFIG_PHYLIB) +# error "DesignWare Ether MAC requires PHYLIB - missing CONFIG_PHYLIB" +#endif + +static int dw_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) +{ + struct eth_mac_regs *mac_p = bus->priv; + ulong start; + u16 miiaddr; + int timeout = CONFIG_MDIO_TIMEOUT; + + miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | + ((reg << MIIREGSHIFT) & MII_REGMSK); + + writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr); + + start = get_timer(0); + while (get_timer(start) < timeout) { + if (!(readl(&mac_p->miiaddr) & MII_BUSY)) + return readl(&mac_p->miidata); + udelay(10); + }; + + return -1; +} + +static int dw_mdio_write(struct mii_dev *bus, int addr, int devad, int reg, + u16 val) +{ + struct eth_mac_regs *mac_p = bus->priv; + ulong start; + u16 miiaddr; + int ret = -1, timeout = CONFIG_MDIO_TIMEOUT; + + writel(val, &mac_p->miidata); + miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | + ((reg << MIIREGSHIFT) & MII_REGMSK) | MII_WRITE; + + writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr); + + start = get_timer(0); + while (get_timer(start) < timeout) { + if (!(readl(&mac_p->miiaddr) & MII_BUSY)) { + ret = 0; + break; + } + udelay(10); + }; + + return ret; +} + +static int dw_mdio_init(char *name, struct eth_mac_regs *mac_regs_p) +{ + struct mii_dev *bus = mdio_alloc(); + + if (!bus) { + printf("Failed to allocate MDIO bus\n"); + return -1; + } + + bus->read = dw_mdio_read; + bus->write = dw_mdio_write; + sprintf(bus->name, name); + + bus->priv = (void *)mac_regs_p; + + return mdio_register(bus); +} static void tx_descs_init(struct eth_device *dev) { @@ -51,7 +119,13 @@ static void tx_descs_init(struct eth_device *dev) /* Correcting the last pointer of the chain */ desc_p->dmamac_next = &desc_table_p[0]; + /* Flush all Tx buffer descriptors at once */ + flush_dcache_range((unsigned int)priv->tx_mac_descrtable, + (unsigned int)priv->tx_mac_descrtable + + sizeof(priv->tx_mac_descrtable)); + writel((ulong)&desc_table_p[0], &dma_p->txdesclistaddr); + priv->tx_currdescnum = 0; } static void rx_descs_init(struct eth_device *dev) @@ -63,6 +137,15 @@ static void rx_descs_init(struct eth_device *dev) struct dmamacdescr *desc_p; u32 idx; + /* Before passing buffers to GMAC we need to make sure zeros + * written there right after "priv" structure allocation were + * flushed into RAM. + * Otherwise there's a chance to get some of them flushed in RAM when + * GMAC is already pushing data to RAM via DMA. This way incoming from + * GMAC data will be corrupted. */ + flush_dcache_range((unsigned int)rxbuffs, (unsigned int)rxbuffs + + RX_TOTAL_BUFSIZE); + for (idx = 0; idx < CONFIG_RX_DESCR_NUM; idx++) { desc_p = &desc_table_p[idx]; desc_p->dmamac_addr = &rxbuffs[idx * CONFIG_ETH_BUFSIZE]; @@ -78,56 +161,68 @@ static void rx_descs_init(struct eth_device *dev) /* Correcting the last pointer of the chain */ desc_p->dmamac_next = &desc_table_p[0]; + /* Flush all Rx buffer descriptors at once */ + flush_dcache_range((unsigned int)priv->rx_mac_descrtable, + (unsigned int)priv->rx_mac_descrtable + + sizeof(priv->rx_mac_descrtable)); + writel((ulong)&desc_table_p[0], &dma_p->rxdesclistaddr); + priv->rx_currdescnum = 0; } -static void descs_init(struct eth_device *dev) +static int dw_write_hwaddr(struct eth_device *dev) { - tx_descs_init(dev); - rx_descs_init(dev); + struct dw_eth_dev *priv = dev->priv; + struct eth_mac_regs *mac_p = priv->mac_regs_p; + u32 macid_lo, macid_hi; + u8 *mac_id = &dev->enetaddr[0]; + + macid_lo = mac_id[0] + (mac_id[1] << 8) + (mac_id[2] << 16) + + (mac_id[3] << 24); + macid_hi = mac_id[4] + (mac_id[5] << 8); + + writel(macid_hi, &mac_p->macaddr0hi); + writel(macid_lo, &mac_p->macaddr0lo); + + return 0; } -static int mac_reset(struct eth_device *dev) +static void dw_adjust_link(struct eth_mac_regs *mac_p, + struct phy_device *phydev) { - struct dw_eth_dev *priv = dev->priv; - struct eth_mac_regs *mac_p = priv->mac_regs_p; - struct eth_dma_regs *dma_p = priv->dma_regs_p; + u32 conf = readl(&mac_p->conf) | FRAMEBURSTENABLE | DISABLERXOWN; - ulong start; - int timeout = CONFIG_MACRESET_TIMEOUT; + if (!phydev->link) { + printf("%s: No link.\n", phydev->dev->name); + return; + } - writel(readl(&dma_p->busmode) | DMAMAC_SRST, &dma_p->busmode); + if (phydev->speed != 1000) + conf |= MII_PORTSELECT; - if (priv->interface != PHY_INTERFACE_MODE_RGMII) - writel(MII_PORTSELECT, &mac_p->conf); + if (phydev->speed == 100) + conf |= FES_100; - start = get_timer(0); - while (get_timer(start) < timeout) { - if (!(readl(&dma_p->busmode) & DMAMAC_SRST)) - return 0; + if (phydev->duplex) + conf |= FULLDPLXMODE; - /* Try again after 10usec */ - udelay(10); - }; + writel(conf, &mac_p->conf); - return -1; + printf("Speed: %d, %s duplex%s\n", phydev->speed, + (phydev->duplex) ? "full" : "half", + (phydev->port == PORT_FIBRE) ? ", fiber mode" : ""); } -static int dw_write_hwaddr(struct eth_device *dev) +static void dw_eth_halt(struct eth_device *dev) { struct dw_eth_dev *priv = dev->priv; struct eth_mac_regs *mac_p = priv->mac_regs_p; - u32 macid_lo, macid_hi; - u8 *mac_id = &dev->enetaddr[0]; - - macid_lo = mac_id[0] + (mac_id[1] << 8) + \ - (mac_id[2] << 16) + (mac_id[3] << 24); - macid_hi = mac_id[4] + (mac_id[5] << 8); + struct eth_dma_regs *dma_p = priv->dma_regs_p; - writel(macid_hi, &mac_p->macaddr0hi); - writel(macid_lo, &mac_p->macaddr0lo); + writel(readl(&mac_p->conf) & ~(RXENABLE | TXENABLE), &mac_p->conf); + writel(readl(&dma_p->opmode) & ~(RXSTART | TXSTART), &dma_p->opmode); - return 0; + phy_shutdown(priv->phydev); } static int dw_eth_init(struct eth_device *dev, bd_t *bis) @@ -135,55 +230,43 @@ static int dw_eth_init(struct eth_device *dev, bd_t *bis) struct dw_eth_dev *priv = dev->priv; struct eth_mac_regs *mac_p = priv->mac_regs_p; struct eth_dma_regs *dma_p = priv->dma_regs_p; - u32 conf; + unsigned int start; - if (priv->phy_configured != 1) - configure_phy(dev); + writel(readl(&dma_p->busmode) | DMAMAC_SRST, &dma_p->busmode); - /* Print link status only once */ - if (!priv->link_printed) { - printf("ENET Speed is %d Mbps - %s duplex connection\n", - priv->speed, (priv->duplex == HALF) ? "HALF" : "FULL"); - priv->link_printed = 1; - } + start = get_timer(0); + while (readl(&dma_p->busmode) & DMAMAC_SRST) { + if (get_timer(start) >= CONFIG_MACRESET_TIMEOUT) + return -1; - /* Reset ethernet hardware */ - if (mac_reset(dev) < 0) - return -1; + mdelay(100); + }; - /* Resore the HW MAC address as it has been lost during MAC reset */ + /* Soft reset above clears HW address registers. + * So we have to set it here once again */ dw_write_hwaddr(dev); - writel(FIXEDBURST | PRIORXTX_41 | BURST_16, - &dma_p->busmode); - - writel(readl(&dma_p->opmode) | FLUSHTXFIFO | STOREFORWARD | - TXSECONDFRAME, &dma_p->opmode); + rx_descs_init(dev); + tx_descs_init(dev); - conf = FRAMEBURSTENABLE | DISABLERXOWN; + writel(FIXEDBURST | PRIORXTX_41 | BURST_16, &dma_p->busmode); - if (priv->speed != 1000) - conf |= MII_PORTSELECT; + writel(readl(&dma_p->opmode) | FLUSHTXFIFO | STOREFORWARD, + &dma_p->opmode); - if ((priv->interface != PHY_INTERFACE_MODE_MII) && - (priv->interface != PHY_INTERFACE_MODE_GMII)) { + writel(readl(&dma_p->opmode) | RXSTART | TXSTART, &dma_p->opmode); - if (priv->speed == 100) - conf |= FES_100; + /* Start up the PHY */ + if (phy_startup(priv->phydev)) { + printf("Could not initialize PHY %s\n", + priv->phydev->dev->name); + return -1; } - if (priv->duplex == FULL) - conf |= FULLDPLXMODE; - - writel(conf, &mac_p->conf); - - descs_init(dev); + dw_adjust_link(mac_p, priv->phydev); - /* - * Start/Enable xfer at dma as well as mac level - */ - writel(readl(&dma_p->opmode) | RXSTART, &dma_p->opmode); - writel(readl(&dma_p->opmode) | TXSTART, &dma_p->opmode); + if (!priv->phydev->link) + return -1; writel(readl(&mac_p->conf) | RXENABLE | TXENABLE, &mac_p->conf); @@ -197,6 +280,11 @@ static int dw_eth_send(struct eth_device *dev, void *packet, int length) u32 desc_num = priv->tx_currdescnum; struct dmamacdescr *desc_p = &priv->tx_mac_descrtable[desc_num]; + /* Invalidate only "status" field for the following check */ + invalidate_dcache_range((unsigned long)&desc_p->txrx_status, + (unsigned long)&desc_p->txrx_status + + sizeof(desc_p->txrx_status)); + /* Check if the descriptor is owned by CPU */ if (desc_p->txrx_status & DESC_TXSTS_OWNBYDMA) { printf("CPU not owner of tx frame\n"); @@ -205,6 +293,10 @@ static int dw_eth_send(struct eth_device *dev, void *packet, int length) memcpy((void *)desc_p->dmamac_addr, packet, length); + /* Flush data to be sent */ + flush_dcache_range((unsigned long)desc_p->dmamac_addr, + (unsigned long)desc_p->dmamac_addr + length); + #if defined(CONFIG_DW_ALTDESCRIPTOR) desc_p->txrx_status |= DESC_TXSTS_TXFIRST | DESC_TXSTS_TXLAST; desc_p->dmamac_cntl |= (length << DESC_TXCTRL_SIZE1SHFT) & \ @@ -220,6 +312,10 @@ static int dw_eth_send(struct eth_device *dev, void *packet, int length) desc_p->txrx_status = DESC_TXSTS_OWNBYDMA; #endif + /* Flush modified buffer descriptor */ + flush_dcache_range((unsigned long)desc_p, + (unsigned long)desc_p + sizeof(struct dmamacdescr)); + /* Test the wrap-around condition. */ if (++desc_num >= CONFIG_TX_DESCR_NUM) desc_num = 0; @@ -235,18 +331,28 @@ static int dw_eth_send(struct eth_device *dev, void *packet, int length) static int dw_eth_recv(struct eth_device *dev) { struct dw_eth_dev *priv = dev->priv; - u32 desc_num = priv->rx_currdescnum; + u32 status, desc_num = priv->rx_currdescnum; struct dmamacdescr *desc_p = &priv->rx_mac_descrtable[desc_num]; - - u32 status = desc_p->txrx_status; int length = 0; + /* Invalidate entire buffer descriptor */ + invalidate_dcache_range((unsigned long)desc_p, + (unsigned long)desc_p + + sizeof(struct dmamacdescr)); + + status = desc_p->txrx_status; + /* Check if the owner is the CPU */ if (!(status & DESC_RXSTS_OWNBYDMA)) { length = (status & DESC_RXSTS_FRMLENMSK) >> \ DESC_RXSTS_FRMLENSHFT; + /* Invalidate received data */ + invalidate_dcache_range((unsigned long)desc_p->dmamac_addr, + (unsigned long)desc_p->dmamac_addr + + length); + NetReceive(desc_p->dmamac_addr, length); /* @@ -255,6 +361,11 @@ static int dw_eth_recv(struct eth_device *dev) */ desc_p->txrx_status |= DESC_RXSTS_OWNBYDMA; + /* Flush only status field - others weren't changed */ + flush_dcache_range((unsigned long)&desc_p->txrx_status, + (unsigned long)&desc_p->txrx_status + + sizeof(desc_p->txrx_status)); + /* Test the wrap-around condition. */ if (++desc_num >= CONFIG_RX_DESCR_NUM) desc_num = 0; @@ -265,251 +376,30 @@ static int dw_eth_recv(struct eth_device *dev) return length; } -static void dw_eth_halt(struct eth_device *dev) -{ - struct dw_eth_dev *priv = dev->priv; - - mac_reset(dev); - priv->tx_currdescnum = priv->rx_currdescnum = 0; -} - -static int eth_mdio_read(struct eth_device *dev, u8 addr, u8 reg, u16 *val) -{ - struct dw_eth_dev *priv = dev->priv; - struct eth_mac_regs *mac_p = priv->mac_regs_p; - ulong start; - u32 miiaddr; - int timeout = CONFIG_MDIO_TIMEOUT; - - miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \ - ((reg << MIIREGSHIFT) & MII_REGMSK); - - writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr); - - start = get_timer(0); - while (get_timer(start) < timeout) { - if (!(readl(&mac_p->miiaddr) & MII_BUSY)) { - *val = readl(&mac_p->miidata); - return 0; - } - - /* Try again after 10usec */ - udelay(10); - }; - - return -1; -} - -static int eth_mdio_write(struct eth_device *dev, u8 addr, u8 reg, u16 val) +static int dw_phy_init(struct eth_device *dev) { struct dw_eth_dev *priv = dev->priv; - struct eth_mac_regs *mac_p = priv->mac_regs_p; - ulong start; - u32 miiaddr; - int ret = -1, timeout = CONFIG_MDIO_TIMEOUT; - u16 value; - - writel(val, &mac_p->miidata); - miiaddr = ((addr << MIIADDRSHIFT) & MII_ADDRMSK) | \ - ((reg << MIIREGSHIFT) & MII_REGMSK) | MII_WRITE; - - writel(miiaddr | MII_CLKRANGE_150_250M | MII_BUSY, &mac_p->miiaddr); - - start = get_timer(0); - while (get_timer(start) < timeout) { - if (!(readl(&mac_p->miiaddr) & MII_BUSY)) { - ret = 0; - break; - } + struct phy_device *phydev; + int mask = 0xffffffff; - /* Try again after 10usec */ - udelay(10); - }; - - /* Needed as a fix for ST-Phy */ - eth_mdio_read(dev, addr, reg, &value); - - return ret; -} - -#if defined(CONFIG_DW_SEARCH_PHY) -static int find_phy(struct eth_device *dev) -{ - int phy_addr = 0; - u16 ctrl, oldctrl; - - do { - eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl); - oldctrl = ctrl & BMCR_ANENABLE; - - ctrl ^= BMCR_ANENABLE; - eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl); - eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl); - ctrl &= BMCR_ANENABLE; - - if (ctrl == oldctrl) { - phy_addr++; - } else { - ctrl ^= BMCR_ANENABLE; - eth_mdio_write(dev, phy_addr, MII_BMCR, ctrl); - - return phy_addr; - } - } while (phy_addr < 32); - - return -1; -} +#ifdef CONFIG_PHY_ADDR + mask = 1 << CONFIG_PHY_ADDR; #endif -static int dw_reset_phy(struct eth_device *dev) -{ - struct dw_eth_dev *priv = dev->priv; - u16 ctrl; - ulong start; - int timeout = CONFIG_PHYRESET_TIMEOUT; - u32 phy_addr = priv->address; - - eth_mdio_write(dev, phy_addr, MII_BMCR, BMCR_RESET); - - start = get_timer(0); - while (get_timer(start) < timeout) { - eth_mdio_read(dev, phy_addr, MII_BMCR, &ctrl); - if (!(ctrl & BMCR_RESET)) - break; - - /* Try again after 10usec */ - udelay(10); - }; - - if (get_timer(start) >= CONFIG_PHYRESET_TIMEOUT) + phydev = phy_find_by_mask(priv->bus, mask, priv->interface); + if (!phydev) return -1; -#ifdef CONFIG_PHY_RESET_DELAY - udelay(CONFIG_PHY_RESET_DELAY); -#endif - return 0; -} + phydev->supported &= PHY_GBIT_FEATURES; + phydev->advertising = phydev->supported; -/* - * Add weak default function for board specific PHY configuration - */ -int __weak designware_board_phy_init(struct eth_device *dev, int phy_addr, - int (*mii_write)(struct eth_device *, u8, u8, u16), - int dw_reset_phy(struct eth_device *)) -{ - return 0; -} - -static int configure_phy(struct eth_device *dev) -{ - struct dw_eth_dev *priv = dev->priv; - int phy_addr; - u16 bmcr; -#if defined(CONFIG_DW_AUTONEG) - u16 bmsr; - u32 timeout; - ulong start; -#endif - -#if defined(CONFIG_DW_SEARCH_PHY) - phy_addr = find_phy(dev); - if (phy_addr >= 0) - priv->address = phy_addr; - else - return -1; -#else - phy_addr = priv->address; -#endif - - /* - * Some boards need board specific PHY initialization. This is - * after the main driver init code but before the auto negotiation - * is run. - */ - if (designware_board_phy_init(dev, phy_addr, - eth_mdio_write, dw_reset_phy) < 0) - return -1; - - if (dw_reset_phy(dev) < 0) - return -1; - -#if defined(CONFIG_DW_AUTONEG) - /* Set Auto-Neg Advertisement capabilities to 10/100 half/full */ - eth_mdio_write(dev, phy_addr, MII_ADVERTISE, 0x1E1); - - bmcr = BMCR_ANENABLE | BMCR_ANRESTART; -#else - bmcr = BMCR_SPEED100 | BMCR_FULLDPLX; - -#if defined(CONFIG_DW_SPEED10M) - bmcr &= ~BMCR_SPEED100; -#endif -#if defined(CONFIG_DW_DUPLEXHALF) - bmcr &= ~BMCR_FULLDPLX; -#endif -#endif - if (eth_mdio_write(dev, phy_addr, MII_BMCR, bmcr) < 0) - return -1; - - /* Read the phy status register and populate priv structure */ -#if defined(CONFIG_DW_AUTONEG) - timeout = CONFIG_AUTONEG_TIMEOUT; - start = get_timer(0); - puts("Waiting for PHY auto negotiation to complete"); - while (get_timer(start) < timeout) { - eth_mdio_read(dev, phy_addr, MII_BMSR, &bmsr); - if (bmsr & BMSR_ANEGCOMPLETE) { - priv->phy_configured = 1; - break; - } + priv->phydev = phydev; + phy_config(phydev); - /* Print dot all 1s to show progress */ - if ((get_timer(start) % 1000) == 0) - putc('.'); - - /* Try again after 1msec */ - udelay(1000); - }; - - if (!(bmsr & BMSR_ANEGCOMPLETE)) - puts(" TIMEOUT!\n"); - else - puts(" done\n"); -#else - priv->phy_configured = 1; -#endif - - priv->speed = miiphy_speed(dev->name, phy_addr); - priv->duplex = miiphy_duplex(dev->name, phy_addr); - - return 0; -} - -#if defined(CONFIG_MII) -static int dw_mii_read(const char *devname, u8 addr, u8 reg, u16 *val) -{ - struct eth_device *dev; - - dev = eth_get_dev_by_name(devname); - if (dev) - eth_mdio_read(dev, addr, reg, val); - - return 0; -} - -static int dw_mii_write(const char *devname, u8 addr, u8 reg, u16 val) -{ - struct eth_device *dev; - - dev = eth_get_dev_by_name(devname); - if (dev) - eth_mdio_write(dev, addr, reg, val); - - return 0; + return 1; } -#endif -int designware_initialize(u32 id, ulong base_addr, u32 phy_addr, u32 interface) +int designware_initialize(ulong base_addr, u32 interface) { struct eth_device *dev; struct dw_eth_dev *priv; @@ -531,19 +421,14 @@ int designware_initialize(u32 id, ulong base_addr, u32 phy_addr, u32 interface) memset(dev, 0, sizeof(struct eth_device)); memset(priv, 0, sizeof(struct dw_eth_dev)); - sprintf(dev->name, "mii%d", id); + sprintf(dev->name, "dwmac.%lx", base_addr); dev->iobase = (int)base_addr; dev->priv = priv; - eth_getenv_enetaddr_by_index("eth", id, &dev->enetaddr[0]); - priv->dev = dev; priv->mac_regs_p = (struct eth_mac_regs *)base_addr; priv->dma_regs_p = (struct eth_dma_regs *)(base_addr + DW_DMA_BASE_OFFSET); - priv->address = phy_addr; - priv->phy_configured = 0; - priv->interface = interface; dev->init = dw_eth_init; dev->send = dw_eth_send; @@ -553,8 +438,10 @@ int designware_initialize(u32 id, ulong base_addr, u32 phy_addr, u32 interface) eth_register(dev); -#if defined(CONFIG_MII) - miiphy_register(dev->name, dw_mii_read, dw_mii_write); -#endif - return 1; + priv->interface = interface; + + dw_mdio_init(dev->name, priv->mac_regs_p); + priv->bus = miiphy_get_dev_by_name(dev->name); + + return dw_phy_init(dev); } diff --git a/drivers/net/designware.h b/drivers/net/designware.h index 5440c92..afeacce 100644 --- a/drivers/net/designware.h +++ b/drivers/net/designware.h @@ -16,8 +16,6 @@ #define CONFIG_MACRESET_TIMEOUT (3 * CONFIG_SYS_HZ) #define CONFIG_MDIO_TIMEOUT (3 * CONFIG_SYS_HZ) -#define CONFIG_PHYRESET_TIMEOUT (3 * CONFIG_SYS_HZ) -#define CONFIG_AUTONEG_TIMEOUT (5 * CONFIG_SYS_HZ) struct eth_mac_regs { u32 conf; /* 0x00 */ @@ -217,14 +215,9 @@ struct dmamacdescr { #endif struct dw_eth_dev { - u32 address; u32 interface; - u32 speed; - u32 duplex; u32 tx_currdescnum; u32 rx_currdescnum; - u32 phy_configured; - u32 link_printed; struct dmamacdescr tx_mac_descrtable[CONFIG_TX_DESCR_NUM]; struct dmamacdescr rx_mac_descrtable[CONFIG_RX_DESCR_NUM]; @@ -236,15 +229,8 @@ struct dw_eth_dev { struct eth_dma_regs *dma_regs_p; struct eth_device *dev; + struct phy_device *phydev; + struct mii_dev *bus; }; -/* Speed specific definitions */ -#define SPEED_10M 1 -#define SPEED_100M 2 -#define SPEED_1000M 3 - -/* Duplex mode specific definitions */ -#define HALF_DUPLEX 1 -#define FULL_DUPLEX 2 - #endif diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 6b4cade..5eb4601 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -34,6 +34,7 @@ obj-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o obj-$(CONFIG_BFIN_SERIAL) += serial_bfin.o obj-$(CONFIG_FSL_LPUART) += serial_lpuart.o obj-$(CONFIG_MXS_AUART) += mxs_auart.o +obj-$(CONFIG_ARC_SERIAL) += serial_arc.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_USB_TTY) += usbtty.o diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index df2b84a..05cb369 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -160,6 +160,7 @@ serial_initfunc(sa1100_serial_initialize); serial_initfunc(sh_serial_initialize); serial_initfunc(arm_dcc_initialize); serial_initfunc(mxs_auart_initialize); +serial_initfunc(arc_serial_initialize); /** * serial_register() - Register serial driver with serial driver core @@ -253,6 +254,7 @@ void serial_initialize(void) sh_serial_initialize(); arm_dcc_initialize(); mxs_auart_initialize(); + arc_serial_initialize(); serial_assign(default_serial_console()->name); } diff --git a/drivers/serial/serial_arc.c b/drivers/serial/serial_arc.c new file mode 100644 index 0000000..e63d25d --- /dev/null +++ b/drivers/serial/serial_arc.c @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2013 Synopsys, Inc. (www.synopsys.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <common.h> +#include <serial.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct arc_serial_regs { + unsigned int id0; + unsigned int id1; + unsigned int id2; + unsigned int id3; + unsigned int data; + unsigned int status; + unsigned int baudl; + unsigned int baudh; +}; + +/* Bit definitions of STATUS register */ +#define UART_RXEMPTY (1 << 5) +#define UART_OVERFLOW_ERR (1 << 1) +#define UART_TXEMPTY (1 << 7) + +struct arc_serial_regs *regs; + +static void arc_serial_setbrg(void) +{ + int arc_console_baud; + + if (!gd->baudrate) + gd->baudrate = CONFIG_BAUDRATE; + + arc_console_baud = gd->cpu_clk / (gd->baudrate * 4) - 1; + writel(arc_console_baud & 0xff, ®s->baudl); + writel((arc_console_baud & 0xff00) >> 8, ®s->baudh); +} + +static int arc_serial_init(void) +{ + regs = (struct arc_serial_regs *)CONFIG_ARC_UART_BASE; + serial_setbrg(); + return 0; +} + +static void arc_serial_putc(const char c) +{ + if (c == '\n') + arc_serial_putc('\r'); + + while (!(readl(®s->status) & UART_TXEMPTY)) + ; + + writel(c, ®s->data); +} + +static int arc_serial_tstc(void) +{ + return !(readl(®s->status) & UART_RXEMPTY); +} + +static int arc_serial_getc(void) +{ + while (!arc_serial_tstc()) + ; + + /* Check for overflow errors */ + if (readl(®s->status) & UART_OVERFLOW_ERR) + return 0; + + return readl(®s->data) & 0xFF; +} + +static void arc_serial_puts(const char *s) +{ + while (*s) + arc_serial_putc(*s++); +} + +static struct serial_device arc_serial_drv = { + .name = "arc_serial", + .start = arc_serial_init, + .stop = NULL, + .setbrg = arc_serial_setbrg, + .putc = arc_serial_putc, + .puts = arc_serial_puts, + .getc = arc_serial_getc, + .tstc = arc_serial_tstc, +}; + +void arc_serial_initialize(void) +{ + serial_register(&arc_serial_drv); +} + +__weak struct serial_device *default_serial_console(void) +{ + return &arc_serial_drv; +} diff --git a/examples/standalone/stubs.c b/examples/standalone/stubs.c index 32a19ce..c5c025d 100644 --- a/examples/standalone/stubs.c +++ b/examples/standalone/stubs.c @@ -210,6 +210,19 @@ gd_t *global_data; " l.jr r13\n" \ " l.nop\n" \ : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r13"); +#elif defined(CONFIG_ARC) +/* + * r25 holds the pointer to the global_data. r10 is call clobbered. + */ +#define EXPORT_FUNC(x) \ + asm volatile( \ +" .align 4\n" \ +" .globl " #x "\n" \ +#x ":\n" \ +" ld r10, [r25, %0]\n" \ +" ld r10, [r10, %1]\n" \ +" j [r10]\n" \ + : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "r10"); #else /*" addi $sp, $sp, -24\n" \ " br $r16\n" \*/ diff --git a/include/common.h b/include/common.h index d5ebb25..221b776 100644 --- a/include/common.h +++ b/include/common.h @@ -408,6 +408,9 @@ static inline int setenv_addr(const char *varname, const void *addr) #ifdef CONFIG_MIPS # include <asm/u-boot-mips.h> #endif /* CONFIG_MIPS */ +#ifdef CONFIG_ARC +# include <asm/u-boot-arc.h> +#endif /* CONFIG_ARC */ #ifdef CONFIG_AUTO_COMPLETE int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf); diff --git a/include/configs/arcangel4-be.h b/include/configs/arcangel4-be.h new file mode 100644 index 0000000..88d27db --- /dev/null +++ b/include/configs/arcangel4-be.h @@ -0,0 +1,92 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_ARCANGEL4_H_ +#define _CONFIG_ARCANGEL4_H_ + +/* + * CPU configuration + */ +#define CONFIG_SYS_BIG_ENDIAN +#define CONFIG_ARC700 +#define CONFIG_ARC_MMU_VER 3 +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_SYS_CLK_FREQ 70000000 +#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ + +/* + * Board configuration + */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ + +#define CONFIG_ARCH_EARLY_INIT_R + +/* + * Memory configuration + */ +#define CONFIG_SYS_TEXT_BASE 0x81000000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_SDRAM_SIZE 0x10000000 /* 256 Mb */ + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_MALLOC_LEN 0x200000 /* 2 MB */ +#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */ +#define CONFIG_SYS_LOAD_ADDR 0x82000000 + +#define CONFIG_SYS_NO_FLASH + +/* + * UART configuration + * + */ +#define CONFIG_ARC_SERIAL +#define CONFIG_ARC_UART_BASE 0xC0FC1000 +#define CONFIG_BAUDRATE 115200 + +/* + * Command line configuration + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF + +#define CONFIG_OF_LIBFDT + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_MAXARGS 16 + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x00200 /* 512 bytes */ +#define CONFIG_ENV_OFFSET 0 + +/* + * Environment configuration + */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyARC0,115200n8" +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR + +/* + * Console configuration + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "arcangel4# " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +#endif /* _CONFIG_ARCANGEL4_H_ */ diff --git a/include/configs/arcangel4.h b/include/configs/arcangel4.h new file mode 100644 index 0000000..4579eb9 --- /dev/null +++ b/include/configs/arcangel4.h @@ -0,0 +1,91 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_ARCANGEL4_H_ +#define _CONFIG_ARCANGEL4_H_ + +/* + * CPU configuration + */ +#define CONFIG_ARC700 +#define CONFIG_ARC_MMU_VER 3 +#define CONFIG_SYS_CACHELINE_SIZE 64 +#define CONFIG_SYS_CLK_FREQ 70000000 +#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ + +/* + * Board configuration + */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ + +#define CONFIG_ARCH_EARLY_INIT_R + +/* + * Memory configuration + */ +#define CONFIG_SYS_TEXT_BASE 0x81000000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_SDRAM_SIZE 0x10000000 /* 256 Mb */ + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_MALLOC_LEN 0x200000 /* 2 MB */ +#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */ +#define CONFIG_SYS_LOAD_ADDR 0x82000000 + +#define CONFIG_SYS_NO_FLASH + +/* + * UART configuration + * + */ +#define CONFIG_ARC_SERIAL +#define CONFIG_ARC_UART_BASE 0xC0FC1000 +#define CONFIG_BAUDRATE 115200 + +/* + * Command line configuration + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ELF + +#define CONFIG_OF_LIBFDT + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_MAXARGS 16 + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_SIZE 0x00200 /* 512 bytes */ +#define CONFIG_ENV_OFFSET 0 + +/* + * Environment configuration + */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyARC0,115200n8" +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR + +/* + * Console configuration + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "arcangel4# " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +#endif /* _CONFIG_ARCANGEL4_H_ */ diff --git a/include/configs/axs101.h b/include/configs/axs101.h new file mode 100644 index 0000000..af2e63b --- /dev/null +++ b/include/configs/axs101.h @@ -0,0 +1,181 @@ +/* + * Copyright (C) 2013-2014 Synopsys, Inc. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _CONFIG_AXS101_H_ +#define _CONFIG_AXS101_H_ + +/* + * CPU configuration + */ +#define CONFIG_ARC700 +#define CONFIG_ARC_MMU_VER 3 +#define CONFIG_SYS_CACHELINE_SIZE 32 +#define CONFIG_SYS_CLK_FREQ 750000000 +#define CONFIG_SYS_TIMER_RATE CONFIG_SYS_CLK_FREQ + +/* dwgmac doesn't work with D$ enabled now */ +#define CONFIG_SYS_DCACHE_OFF + +/* + * Board configuration + */ +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_SKIP_LOWLEVEL_INIT /* U-Boot is in RAM already */ + +#define CONFIG_ARCH_EARLY_INIT_R + +#define ARC_FPGA_PERIPHERAL_BASE 0xE0000000 +#define ARC_APB_PERIPHERAL_BASE 0xF0000000 +#define ARC_DWMMC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x15000) +#define ARC_DWGMAC_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x18000) + +/* + * Memory configuration + */ +#define CONFIG_SYS_TEXT_BASE 0x81000000 +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_SYS_SDRAM_SIZE 0x10000000 /* 256 Mb */ + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 0x1000 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_MALLOC_LEN 0x200000 /* 2 MB */ +#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MB */ +#define CONFIG_SYS_LOAD_ADDR 0x82000000 + +/* + * NAND Flash configuration + */ +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_NAND_BASE (ARC_FPGA_PERIPHERAL_BASE + 0x16000) +#define CONFIG_SYS_MAX_NAND_DEVICE 1 + +/* + * UART configuration + * + * CONFIG_CONS_INDEX = 1 - Debug UART + * CONFIG_CONS_INDEX = 4 - FPGA UART connected to FTDI/USB + */ +#define CONFIG_CONS_INDEX 4 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#if (CONFIG_CONS_INDEX == 1) + /* Debug UART */ +# define CONFIG_SYS_NS16550_CLK 33333000 +#else + /* FPGA UARTs use different clock */ +# define CONFIG_SYS_NS16550_CLK 33333333 +#endif +#define CONFIG_SYS_NS16550_COM1 (ARC_APB_PERIPHERAL_BASE + 0x5000) +#define CONFIG_SYS_NS16550_COM2 (ARC_FPGA_PERIPHERAL_BASE + 0x20000) +#define CONFIG_SYS_NS16550_COM3 (ARC_FPGA_PERIPHERAL_BASE + 0x21000) +#define CONFIG_SYS_NS16550_COM4 (ARC_FPGA_PERIPHERAL_BASE + 0x22000) +#define CONFIG_SYS_NS16550_MEM32 + +#define CONFIG_BAUDRATE 115200 +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C +#define CONFIG_DW_I2C +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_ENV_EEPROM_BUS 2 +#define CONFIG_SYS_I2C_SPEED 100000 +#define CONFIG_SYS_I2C_SLAVE 0 +#define CONFIG_SYS_I2C_BASE 0xE001D000 +#define CONFIG_SYS_I2C_BASE1 0xE001E000 +#define CONFIG_SYS_I2C_BASE2 0xE001F000 +#define CONFIG_SYS_I2C_BUS_MAX 3 +#define IC_CLK 50 + +/* + * EEPROM configuration + */ +#define CONFIG_SYS_I2C_MULTI_EEPROMS +#define CONFIG_SYS_I2C_EEPROM_ADDR (0xA8 >> 1) +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 32 + +/* + * SD/MMC configuration + */ +#define CONFIG_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_DWMMC +#define CONFIG_DOS_PARTITION + +/* + * Ethernet PHY configuration + */ +#define CONFIG_PHYLIB +#define CONFIG_MII +#define CONFIG_PHY_GIGE + +/* + * Ethernet configuration + */ +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_AUTONEG +#define CONFIG_DW_SEARCH_PHY +#define CONFIG_NET_MULTI + +/* + * Command line configuration + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_FAT +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MMC +#define CONFIG_CMD_NAND +#define CONFIG_CMD_PING +#define CONFIG_CMD_RARP + +#define CONFIG_OF_LIBFDT + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_MAXARGS 16 + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_IN_EEPROM +#define CONFIG_ENV_SIZE 0x00200 /* 512 bytes */ +#define CONFIG_ENV_OFFSET 0 + +/* + * Environment configuration + */ +#define CONFIG_BOOTDELAY 3 +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_BOOTARGS "console=ttyS3,115200n8" +#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR + +/* + * Console configuration + */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_PROMPT "axs# " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* + * Misc utility configuration + */ +#define CONFIG_BOUNCE_BUFFER + +#endif /* _CONFIG_AXS101_H_ */ diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h index 1a43e1b..12192ff 100644 --- a/include/configs/bf609-ezkit.h +++ b/include/configs/bf609-ezkit.h @@ -72,12 +72,13 @@ #define CONFIG_NET_MULTI #define CONFIG_HOSTNAME "bf609-ezkit" #define CONFIG_DESIGNWARE_ETH +#define CONFIG_PHY_ADDR 1 #define CONFIG_DW_PORTS 1 -#define CONFIG_DW_AUTONEG #define CONFIG_DW_ALTDESCRIPTOR #define CONFIG_CMD_NET #define CONFIG_CMD_MII #define CONFIG_MII +#define CONFIG_PHYLIB /* i2c Settings */ #define CONFIG_BFIN_TWI_I2C diff --git a/include/configs/spear-common.h b/include/configs/spear-common.h index 23f7ad7..e090a37 100644 --- a/include/configs/spear-common.h +++ b/include/configs/spear-common.h @@ -17,11 +17,9 @@ /* Ethernet driver configuration */ #define CONFIG_MII #define CONFIG_DESIGNWARE_ETH -#define CONFIG_DW_SEARCH_PHY -#define CONFIG_DW0_PHY 1 #define CONFIG_NET_MULTI +#define CONFIG_PHYLIB #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ -#define CONFIG_DW_AUTONEG #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ /* USBD driver configuration */ diff --git a/include/configs/spear6xx_evb.h b/include/configs/spear6xx_evb.h index 7f4dc58..28dddcc 100644 --- a/include/configs/spear6xx_evb.h +++ b/include/configs/spear6xx_evb.h @@ -37,6 +37,9 @@ #define CONFIG_SYS_FSMC_NAND_8BIT #define CONFIG_SYS_NAND_BASE 0xD2000000 +/* Ethernet PHY configuration */ +#define CONFIG_PHY_NATSEMI + /* Environment Settings */ #define CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_USBTTY diff --git a/include/configs/x600.h b/include/configs/x600.h index 39540e3..00b938a 100644 --- a/include/configs/x600.h +++ b/include/configs/x600.h @@ -74,10 +74,9 @@ /* Ethernet config options */ #define CONFIG_MII #define CONFIG_DESIGNWARE_ETH -#define CONFIG_DW_SEARCH_PHY #define CONFIG_NET_MULTI +#define CONFIG_PHYLIB #define CONFIG_PHY_RESET_DELAY 10000 /* in usec */ -#define CONFIG_DW_AUTONEG #define CONFIG_PHY_ADDR 0 /* PHY address */ #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ diff --git a/include/image.h b/include/image.h index 7de2bb2..3ba8c2e 100644 --- a/include/image.h +++ b/include/image.h @@ -157,6 +157,7 @@ struct lmb; #define IH_ARCH_NDS32 20 /* ANDES Technology - NDS32 */ #define IH_ARCH_OPENRISC 21 /* OpenRISC 1000 */ #define IH_ARCH_ARM64 22 /* ARM64 */ +#define IH_ARCH_ARC 23 /* Synopsys DesignWare ARC */ /* * Image Types diff --git a/include/netdev.h b/include/netdev.h index 47fa80d..3705629 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -36,7 +36,7 @@ int calxedaxgmac_initialize(u32 id, ulong base_addr); int cs8900_initialize(u8 dev_num, int base_addr); int davinci_emac_initialize(void); int dc21x4x_initialize(bd_t *bis); -int designware_initialize(u32 id, ulong base_addr, u32 phy_addr, u32 interface); +int designware_initialize(ulong base_addr, u32 interface); int dm9000_initialize(bd_t *bis); int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr); int e1000_initialize(bd_t *bis); @@ -279,7 +279,7 @@ int eth_initialize(bd_t *bis) eth_current = NULL; bootstage_mark(BOOTSTAGE_ID_NET_ETH_START); -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) +#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) || defined(CONFIG_PHYLIB) miiphy_init(); #endif |