diff options
36 files changed, 896 insertions, 298 deletions
diff --git a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c b/arch/arm/cpu/arm926ejs/kirkwood/mpp.c index 03eb2de..0ba6f09 100644 --- a/arch/arm/cpu/arm926ejs/kirkwood/mpp.c +++ b/arch/arm/cpu/arm926ejs/kirkwood/mpp.c @@ -31,7 +31,7 @@ static u32 kirkwood_variant(void) #define MPP_CTRL(i) (KW_MPP_BASE + (i* 4)) #define MPP_NR_REGS (1 + MPP_MAX/8) -void kirkwood_mpp_conf(u32 *mpp_list, u32 *mpp_save) +void kirkwood_mpp_conf(const u32 *mpp_list, u32 *mpp_save) { u32 mpp_ctrl[MPP_NR_REGS]; unsigned int variant_mask; diff --git a/arch/arm/include/asm/arch-kirkwood/cpu.h b/arch/arm/include/asm/arch-kirkwood/cpu.h index 57bfe8e..009a6bb 100644 --- a/arch/arm/include/asm/arch-kirkwood/cpu.h +++ b/arch/arm/include/asm/arch-kirkwood/cpu.h @@ -33,7 +33,7 @@ | (attr << 8) | (kw_winctrl_calcsize(size) << 16)) #define KWGBE_PORT_SERIAL_CONTROL1_REG(_x) \ - ((_x ? KW_EGIGA0_BASE : KW_EGIGA1_BASE) + 0x44c) + ((_x ? KW_EGIGA1_BASE : KW_EGIGA0_BASE) + 0x44c) #define KW_REG_PCIE_DEVID (KW_REG_PCIE_BASE + 0x00) #define KW_REG_PCIE_REVID (KW_REG_PCIE_BASE + 0x08) diff --git a/arch/arm/include/asm/arch-kirkwood/mpp.h b/arch/arm/include/asm/arch-kirkwood/mpp.h index 8ceea7b..48d1477 100644 --- a/arch/arm/include/asm/arch-kirkwood/mpp.h +++ b/arch/arm/include/asm/arch-kirkwood/mpp.h @@ -312,6 +312,6 @@ #define MPP_MAX 49 -void kirkwood_mpp_conf(u32 *mpp_list, u32 *mpp_save); +void kirkwood_mpp_conf(const u32 *mpp_list, u32 *mpp_save); #endif diff --git a/board/LaCie/net2big_v2/net2big_v2.c b/board/LaCie/net2big_v2/net2big_v2.c index 0e06c29..e524f35 100644 --- a/board/LaCie/net2big_v2/net2big_v2.c +++ b/board/LaCie/net2big_v2/net2big_v2.c @@ -39,7 +39,7 @@ int board_early_init_f(void) NET2BIG_V2_OE_LOW, NET2BIG_V2_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_SPI_SCn, MPP1_SPI_MOSI, MPP2_SPI_SCK, diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c index 101a80a..0aa5345 100644 --- a/board/LaCie/netspace_v2/netspace_v2.c +++ b/board/LaCie/netspace_v2/netspace_v2.c @@ -39,7 +39,7 @@ int board_early_init_f(void) NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_SPI_SCn, MPP1_SPI_MOSI, MPP2_SPI_SCK, diff --git a/board/LaCie/wireless_space/Makefile b/board/LaCie/wireless_space/Makefile new file mode 100644 index 0000000..b43c3d3 --- /dev/null +++ b/board/LaCie/wireless_space/Makefile @@ -0,0 +1,46 @@ +# +# Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> +# +# Based on Kirkwood support: +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <prafulla@marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif + +LIB = $(obj)lib$(BOARD).o + +COBJS := $(BOARD).o ../common/common.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/LaCie/wireless_space/kwbimage.cfg b/board/LaCie/wireless_space/kwbimage.cfg new file mode 100644 index 0000000..0daf5b5 --- /dev/null +++ b/board/LaCie/wireless_space/kwbimage.cfg @@ -0,0 +1,82 @@ +# +# Copyright (C) 2012 Albert ARIBAUD <albert.u.boot@aribaud.net> +# +# Based on netspace_v2 kwbimage.cfg: +# Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> +# +# Based on Kirkwood support: +# (C) Copyright 2009 +# Marvell Semiconductor <www.marvell.com> +# Written-by: Prafulla Wadaskar <prafulla@marvell.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM nand # Boot from NAND flash +NAND_PAGE_SIZE 800 + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +# Values taken from image original LaCie U-Boot header dump! + +# Configure RGMII-0 interface pad voltage to 1.8V +DATA 0xFFD100e0 0x1B1B1B9B + +#Dram initalization for SINGLE x16 CL=5 @ 400MHz +DATA 0xFFD01400 0x43000c30 # DDR Configuration register + +DATA 0xFFD01404 0x37743000 # DDR Controller Control Low + +DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1) + +DATA 0xFFD0140C 0x00000A19 # DDR Timing (High) + +DATA 0xFFD01410 0x0000CCCC # DDR Address Control + +DATA 0xFFD01414 0x00000000 # DDR Open Pages Control + +DATA 0xFFD01418 0x00000000 # DDR Operation + +DATA 0xFFD0141C 0x00000662 # DDR Mode + +DATA 0xFFD01420 0x00000004 # DDR Extended Mode + +DATA 0xFFD01424 0x0000F07F # DDR Controller Control High + +DATA 0xFFD01428 0x00096630 # DDR2 ODT Read Timing (default values) + +DATA 0xFFD0147C 0x00009663 # DDR2 ODT Write Timing (default values) + +DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size +DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 0x0 +DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled +DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled +DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled +DATA 0xFFD01494 0x00120012 # DDR ODT Control (Low) +DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) +DATA 0xFFD0149C 0x0000E40F # CPU ODT Control +DATA 0xFFD01480 0x00000001 # DDR Initialization Control +DATA 0xFFD20134 0x66666666 +DATA 0xFFD20138 0x66666666 +DATA 0xFFD10000 0x01112222 +DATA 0xFFD1000C 0x00000000 +DATA 0xFFD10104 0x00000000 +DATA 0xFFD10100 0x40000000 +# End of Header extension +DATA 0x0 0x0 diff --git a/board/LaCie/wireless_space/wireless_space.c b/board/LaCie/wireless_space/wireless_space.c new file mode 100644 index 0000000..2080658 --- /dev/null +++ b/board/LaCie/wireless_space/wireless_space.c @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> + * + * Based on Kirkwood support: + * (C) Copyright 2009 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <command.h> +#include <asm/arch/cpu.h> +#include <asm/arch/kirkwood.h> +#include <asm/arch/mpp.h> +#include <asm/arch/gpio.h> + +#include "../common/common.h" +#include "netdev.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* GPIO configuration: start FAN at low speed, USB and HDD */ + +#define WIRELESS_SPACE_OE_LOW 0xFF006808 +#define WIRELESS_SPACE_OE_HIGH 0x0000F989 +#define WIRELESS_SPACE_OE_VAL_LOW 0x00010080 +#define WIRELESS_SPACE_OE_VAL_HIGH 0x00000240 + +#define WIRELESS_SPACE_REAR_BUTTON 13 +#define WIRELESS_SPACE_FRONT_BUTTON 43 + +const u32 kwmpp_config[] = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Fan speed (bit 1) */ + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_GPIO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP15_SATA0_ACTn, + MPP16_GPIO, /* SATA 0 power */ + MPP17_GPIO, /* SATA 1 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GE1_0, /* Gigabit Ethernet 1 */ + MPP21_GE1_1, + MPP22_GE1_2, + MPP23_GE1_3, + MPP24_GE1_4, + MPP25_GE1_5, + MPP26_GE1_6, + MPP27_GE1_7, + MPP28_GE1_8, + MPP29_GE1_9, + MPP30_GE1_10, + MPP31_GE1_11, + MPP32_GE1_12, + MPP33_GE1_13, + MPP34_GE1_14, + MPP35_GE1_15, + MPP36_GPIO, /* Fan speed (bit 2) */ + MPP37_GPIO, /* Fan speed (bit 0) */ + MPP38_GPIO, /* Fan power */ + MPP39_GPIO, /* Fan rotation fail */ + MPP40_GPIO, /* Ethernet switch link */ + MPP41_GPIO, /* USB enable host vbus */ + MPP42_GPIO, /* LED clock control */ + MPP43_GPIO, /* WPS button (0=Pushed, 1=Released) */ + MPP44_GPIO, /* Red LED on/off */ + MPP45_GPIO, /* Red LED timer blink (on=off=100ms) */ + MPP46_GPIO, /* Green LED on/off */ + MPP47_GPIO, /* LED (blue, green) SATA activity blink */ + MPP48_GPIO, /* Blue LED on/off */ + 0 +}; + +struct mv88e61xx_config swcfg = { + .name = "egiga0", + .vlancfg = MV88E61XX_VLANCFG_ROUTER, + .rgmii_delay = MV88E61XX_RGMII_DELAY_EN, + .led_init = MV88E61XX_LED_INIT_EN, + .mdip = MV88E61XX_MDIP_NOCHANGE, + .portstate = MV88E61XX_PORTSTT_FORWARDING, + .cpuport = 0x20, + .ports_enabled = 0x3F, +}; + +int board_early_init_f(void) +{ + /* Gpio configuration */ + kw_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH, + WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH); + + /* Multi-Purpose Pins Functionality configuration */ + kirkwood_mpp_conf(kwmpp_config, NULL); + + return 0; +} + +int board_init(void) +{ + /* Machine number */ + gd->bd->bi_arch_number = CONFIG_MACH_TYPE; + + /* Boot parameters address */ + gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; + + return 0; +} + +#if defined(CONFIG_MISC_INIT_R) +int misc_init_r(void) +{ +#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) + if (!getenv("ethaddr")) { + uchar mac[6]; + if (lacie_read_mac_address(mac) == 0) + eth_setenv_enetaddr("ethaddr", mac); + } +#endif + return 0; +} +#endif + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) +/* Configure and initialize PHY */ +void reset_phy(void) +{ + /* configure switch on egiga0 */ + mv88e61xx_switch_initialize(&swcfg); +} +#endif + +#if defined(CONFIG_KIRKWOOD_GPIO) && defined(CONFIG_WIRELESS_SPACE_CMD) +/* Return GPIO button status */ +static int +do_ws(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + if (strcmp(argv[1], "button") == 0) { + if (strcmp(argv[2], "rear") == 0) + /* invert GPIO result for intuitive while/until use */ + return !kw_gpio_get_value(WIRELESS_SPACE_REAR_BUTTON); + else if (strcmp(argv[2], "front") == 0) + return kw_gpio_get_value(WIRELESS_SPACE_FRONT_BUTTON); + else + return -1; + } else { + return -1; + } +} + +U_BOOT_CMD(ws, 3, 0, do_ws, + "Return GPIO button status 0=off 1=on", + "- ws button rear|front: test buttons' states\n" +); +#endif diff --git a/board/Marvell/dreamplug/dreamplug.c b/board/Marvell/dreamplug/dreamplug.c index d6497aa..0caf34f 100644 --- a/board/Marvell/dreamplug/dreamplug.c +++ b/board/Marvell/dreamplug/dreamplug.c @@ -46,7 +46,7 @@ int board_early_init_f(void) DREAMPLUG_OE_LOW, DREAMPLUG_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_SPI_SCn, /* SPI Flash */ MPP1_SPI_MOSI, MPP2_SPI_SCK, diff --git a/board/Marvell/guruplug/guruplug.c b/board/Marvell/guruplug/guruplug.c index f5c1c3c..3a52ab2 100644 --- a/board/Marvell/guruplug/guruplug.c +++ b/board/Marvell/guruplug/guruplug.c @@ -43,7 +43,7 @@ int board_early_init_f(void) GURUPLUG_OE_LOW, GURUPLUG_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c index 43852f6..fb57faa 100644 --- a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c +++ b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c @@ -45,7 +45,7 @@ int board_early_init_f(void) MV88F6281GTW_GE_OE_LOW, MV88F6281GTW_GE_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_SPI_SCn, MPP1_SPI_MOSI, MPP2_SPI_SCK, diff --git a/board/Marvell/openrd/openrd.c b/board/Marvell/openrd/openrd.c index d48f05a..c59a326 100644 --- a/board/Marvell/openrd/openrd.c +++ b/board/Marvell/openrd/openrd.c @@ -48,7 +48,7 @@ int board_early_init_f(void) OPENRD_OE_LOW, OPENRD_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/Marvell/rd6281a/rd6281a.c b/board/Marvell/rd6281a/rd6281a.c index 1fd7677..adaa6a1 100644 --- a/board/Marvell/rd6281a/rd6281a.c +++ b/board/Marvell/rd6281a/rd6281a.c @@ -44,7 +44,7 @@ int board_early_init_f(void) RD6281A_OE_LOW, RD6281A_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c index 688d308..16efe64 100644 --- a/board/Marvell/sheevaplug/sheevaplug.c +++ b/board/Marvell/sheevaplug/sheevaplug.c @@ -43,7 +43,7 @@ int board_early_init_f(void) SHEEVAPLUG_OE_LOW, SHEEVAPLUG_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/Seagate/dockstar/dockstar.c b/board/Seagate/dockstar/dockstar.c index fc88520..4f1f899 100644 --- a/board/Seagate/dockstar/dockstar.c +++ b/board/Seagate/dockstar/dockstar.c @@ -47,7 +47,7 @@ int board_early_init_f(void) DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/buffalo/lsxl/lsxl.c b/board/buffalo/lsxl/lsxl.c index 57776fb..83eea04 100644 --- a/board/buffalo/lsxl/lsxl.c +++ b/board/buffalo/lsxl/lsxl.c @@ -49,9 +49,8 @@ * you can do this only with a working network connection. Therefore, a random * ethernet address is generated if none is set and a DHCP request is sent. * After a successful DHCP response is received, the network settings are - * configured and the ncip parameter is set to the serverip. Eg. for a working - * resuce mode, you should set 'next-server' to the host where the netconsole - * client is started. + * configured and the ncip is unset. Therefore, all netconsole packets are + * broadcasted. * Additionally, the bootsource is set to 'rescue'. */ @@ -76,7 +75,7 @@ int board_early_init_f(void) * Multi-Purpose Pins Functionality configuration * These strappings are taken from the original vendor uboot port. */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_SPI_SCn, MPP1_SPI_MOSI, MPP2_SPI_SCK, diff --git a/board/cloudengines/pogo_e02/pogo_e02.c b/board/cloudengines/pogo_e02/pogo_e02.c index bac9ce5..3b1c8ec 100644 --- a/board/cloudengines/pogo_e02/pogo_e02.c +++ b/board/cloudengines/pogo_e02/pogo_e02.c @@ -45,7 +45,7 @@ int board_early_init_f(void) POGO_E02_OE_LOW, POGO_E02_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/d-link/dns325/dns325.c b/board/d-link/dns325/dns325.c index 11260fe..4187901 100644 --- a/board/d-link/dns325/dns325.c +++ b/board/d-link/dns325/dns325.c @@ -44,7 +44,7 @@ int board_early_init_f(void) DNS325_OE_LOW, DNS325_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/iomega/iconnect/iconnect.c b/board/iomega/iconnect/iconnect.c index 8cfb4e6..c54c95d 100644 --- a/board/iomega/iconnect/iconnect.c +++ b/board/iomega/iconnect/iconnect.c @@ -41,7 +41,7 @@ int board_early_init_f(void) ICONNECT_OE_LOW, ICONNECT_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/karo/tk71/tk71.c b/board/karo/tk71/tk71.c index 96410d7..7a4e7b3 100644 --- a/board/karo/tk71/tk71.c +++ b/board/karo/tk71/tk71.c @@ -47,7 +47,7 @@ int board_early_init_f(void) TK71_OE_LOW, TK71_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index a90f112..6f407b7 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -121,7 +121,7 @@ int i2c_make_abort(void) { #if defined(CONFIG_HARD_I2C) && !defined(MACH_TYPE_KM_KIRKWOOD) - immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; + immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; /* diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 0c4dddc..eda9199 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -54,7 +54,7 @@ DECLARE_GLOBAL_DATA_PTR; #define MASK_RBI_DEFECT_16 0x01 /* Multi-Purpose Pins Functionality configuration */ -u32 kwmpp_config[] = { +static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, @@ -193,15 +193,6 @@ void set_bootcount_addr(void) int misc_init_r(void) { - char *str; - int mach_type; - - str = getenv("mach_type"); - if (str != NULL) { - mach_type = simple_strtoul(str, NULL, 10); - printf("Overwriting MACH_TYPE with %d!!!\n", mach_type); - gd->bd->bi_arch_number = mach_type; - } #if defined(CONFIG_KM_MGCOGE3UN) char *wait_for_ne; wait_for_ne = getenv("waitforne"); @@ -258,11 +249,6 @@ int board_early_init_f(void) int board_init(void) { - /* - * arch number of board - */ - gd->bd->bi_arch_number = MACH_TYPE_KM_KIRKWOOD; - /* address of boot parameters */ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; diff --git a/board/keymile/km_arm/kwbimage-memphis.cfg b/board/keymile/km_arm/kwbimage-memphis.cfg index 6df2ad7..5aa0de2 100644 --- a/board/keymile/km_arm/kwbimage-memphis.cfg +++ b/board/keymile/km_arm/kwbimage-memphis.cfg @@ -55,9 +55,9 @@ DATA 0xFFD10008 0x00001100 # MPP Control 2 Register DATA 0xFFD100E0 0x1B1B1B1B # IO Configuration 0 Register DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register -DATA 0xFFD20154 0x00000200 # CPU RAM Management Control3 Register -DATA 0xFFD2014C 0x00001C00 # CPU RAM Management Control1 Register -DATA 0xFFD20148 0x00000001 # CPU RAM Management Control0 Register + +# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched! +# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage #Dram initalization DATA 0xFFD01400 0x430004E0 # SDRAM Configuration Register diff --git a/board/keymile/km_arm/kwbimage.cfg b/board/keymile/km_arm/kwbimage.cfg index b2f5193..e5e9942 100644 --- a/board/keymile/km_arm/kwbimage.cfg +++ b/board/keymile/km_arm/kwbimage.cfg @@ -52,9 +52,9 @@ DATA 0xFFD10008 0x00001100 # MPP Control 2 Register DATA 0xFFD100E0 0x1B1B1B1B # IO Configuration 0 Register DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register -DATA 0xFFD20154 0x00000200 # CPU RAM Management Control3 Register -DATA 0xFFD2014C 0x00001C00 # CPU RAM Management Control1 Register -DATA 0xFFD20148 0x00000001 # CPU RAM Management Control0 Register + +# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched! +# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage #Dram initalization DATA 0xFFD01400 0x43000400 # SDRAM Configuration Register diff --git a/board/keymile/km_arm/kwbimage_128M16_1.cfg b/board/keymile/km_arm/kwbimage_128M16_1.cfg index bcce907..5de8df7 100644 --- a/board/keymile/km_arm/kwbimage_128M16_1.cfg +++ b/board/keymile/km_arm/kwbimage_128M16_1.cfg @@ -98,29 +98,8 @@ DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register # bit 19-18: 1, ECC RAM WTC RAM0 # bit 31-20: ???,Reserve -DATA 0xFFD20154 0x00000200 # CPU RAM Management Control3 Register -# bit 23-0: 0x000200, Addr Config tuning -# bit 31-24: 0, Reserved - -# ??? Missing register # CPU RAM Management Control2 Register - -DATA 0xFFD2014C 0x00001C00 # CPU RAM Management Control1 Register -# bit 15-0: 0x1C00, Opmux Tuning -# bit 31-16: 0, Pc Dp Tuning - -DATA 0xFFD20148 0x00000001 # CPU RAM Management Control0 Register -# bit 1-0: 1, addr clk tune -# bit 3-2: 0, reserved -# bit 5-4: 0, dtcmp clk tune -# bit 7-6: 0, reserved -# bit 9-8: 0, macdrv clk tune -# bit 11-10: 0, opmuxgm2 clk tune -# bit 15-14: 0, rf clk tune -# bit 17-16: 0, rfbypass clk tune -# bit 19-18: 0, pc dp clk tune -# bit 23-20: 0, icache clk tune -# bit 27:24: 0, dcache clk tune -# bit 31:28: 0, regfile tunin +# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched! +# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage # SDRAM initalization DATA 0xFFD01400 0x430004E0 # SDRAM Configuration Register diff --git a/board/keymile/km_arm/kwbimage_256M8_1.cfg b/board/keymile/km_arm/kwbimage_256M8_1.cfg index 3e1237b..d0a09f6 100644 --- a/board/keymile/km_arm/kwbimage_256M8_1.cfg +++ b/board/keymile/km_arm/kwbimage_256M8_1.cfg @@ -100,29 +100,8 @@ DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register # bit 19-18: 1, ECC RAM WTC RAM0 # bit 31-20: ?,Reserved -DATA 0xFFD20154 0x00000200 # CPU RAM Management Control3 Register -# bit 23-0: 0x000200, Addr Config tuning -# bit 31-24: 0, Reserved - -# ??? Missing register # CPU RAM Management Control2 Register - -DATA 0xFFD2014C 0x00001C00 # CPU RAM Management Control1 Register -# bit 15-0: 0x1C00, Opmux Tuning -# bit 31-16: 0, Pc Dp Tuning - -DATA 0xFFD20148 0x00000001 # CPU RAM Management Control0 Register -# bit 1-0: 1, addr clk tune -# bit 3-2: 0, reserved -# bit 5-4: 0, dtcmp clk tune -# bit 7-6: 0, reserved -# bit 9-8: 0, macdrv clk tune -# bit 11-10: 0, opmuxgm2 clk tune -# bit 15-14: 0, rf clk tune -# bit 17-16: 0, rfbypass clk tune -# bit 19-18: 0, pc dp clk tune -# bit 23-20: 0, icache clk tune -# bit 27:24: 0, dcache clk tune -# bit 31:28: 0, regfile tunin +# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched! +# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage # SDRAM initalization DATA 0xFFD01400 0x430004E0 # SDRAM Configuration Register diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c index 5f0f396..cf4ca51 100644 --- a/board/raidsonic/ib62x0/ib62x0.c +++ b/board/raidsonic/ib62x0/ib62x0.c @@ -45,7 +45,7 @@ int board_early_init_f(void) /* Set SATA activity LEDs to default off */ writel(MVSATAHC_LED_POLARITY_CTRL, MVSATAHC_LED_CONF_REG); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, @@ -171,6 +171,7 @@ netspace_lite_v2 arm arm926ejs netspace_v2 LaCie netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MAX_V2 netspace_mini_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MINI_V2 netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2 +wireless_space arm arm926ejs wireless_space LaCie kirkwood dreamplug arm arm926ejs - Marvell kirkwood guruplug arm arm926ejs - Marvell kirkwood mv88f6281gtw_ge arm arm926ejs - Marvell kirkwood diff --git a/drivers/net/phy/mv88e61xx.c b/drivers/net/phy/mv88e61xx.c index 483a920..e8da66d 100644 --- a/drivers/net/phy/mv88e61xx.c +++ b/drivers/net/phy/mv88e61xx.c @@ -26,6 +26,14 @@ #include <netdev.h> #include "mv88e61xx.h" +/* + * Uncomment either of the following line for local debug control; + * otherwise global debug control will apply. + */ + +/* #undef DEBUG */ +/* #define DEBUG */ + #ifdef CONFIG_MV88E61XX_MULTICHIP_ADRMODE /* Chip Address mode * The Switch support two modes of operation @@ -52,7 +60,8 @@ static int mv88e61xx_busychk_multic(char *name, u32 devaddr) return 0; } -static void mv88e61xx_wr_phy(char *name, u32 phy_adr, u32 reg_ofs, u16 data) +static void mv88e61xx_switch_write(char *name, u32 phy_adr, + u32 reg_ofs, u16 data) { u16 mii_dev_addr; @@ -70,7 +79,8 @@ static void mv88e61xx_wr_phy(char *name, u32 phy_adr, u32 reg_ofs, u16 data) 15)); } -static void mv88e61xx_rd_phy(char *name, u32 phy_adr, u32 reg_ofs, u16 * data) +static void mv88e61xx_switch_read(char *name, u32 phy_adr, + u32 reg_ofs, u16 *data) { u16 mii_dev_addr; @@ -90,110 +100,51 @@ static void mv88e61xx_rd_phy(char *name, u32 phy_adr, u32 reg_ofs, u16 * data) } #endif /* CONFIG_MV88E61XX_MULTICHIP_ADRMODE */ -static void mv88e61xx_port_vlan_config(struct mv88e61xx_config *swconfig, - u32 max_prtnum, u32 ports_ofs) -{ - u32 prt; - u16 reg; - char *name = swconfig->name; - u32 cpu_port = swconfig->cpuport; - u32 port_mask = swconfig->ports_enabled; - enum mv88e61xx_cfg_vlan vlancfg = swconfig->vlancfg; - - /* be sure all ports are disabled */ - for (prt = 0; prt < max_prtnum; prt++) { - RD_PHY(name, ports_ofs + prt, MV88E61XX_PRT_CTRL_REG, ®); - reg &= ~0x3; - WR_PHY(name, ports_ofs + prt, MV88E61XX_PRT_CTRL_REG, reg); - - if (!(cpu_port & (1 << prt))) - continue; - /* Set CPU port VID to 0x1 */ - RD_PHY(name, (ports_ofs + prt), MV88E61XX_PRT_VID_REG, ®); - reg &= ~0xfff; - reg |= 0x1; - WR_PHY(name, (ports_ofs + prt), MV88E61XX_PRT_VID_REG, reg); - } - - /* Setting Port default priority for all ports to zero */ - for (prt = 0; prt < max_prtnum; prt++) { - RD_PHY(name, ports_ofs + prt, MV88E61XX_PRT_VID_REG, ®); - reg &= ~0xc000; - WR_PHY(name, ports_ofs + prt, MV88E61XX_PRT_VID_REG, reg); - } - /* Setting VID and VID map for all ports except CPU port */ - for (prt = 0; prt < max_prtnum; prt++) { - /* only for enabled ports */ - if ((1 << prt) & port_mask) { - /* skip CPU port */ - if ((1 << prt) & cpu_port) { - /* - * Set Vlan map table for cpu_port to see - * all ports - */ - RD_PHY(name, (ports_ofs + prt), - MV88E61XX_PRT_VMAP_REG, ®); - reg &= ~((1 << max_prtnum) - 1); - reg |= port_mask & ~(1 << prt); - WR_PHY(name, (ports_ofs + prt), - MV88E61XX_PRT_VMAP_REG, reg); - } else { - - /* - * set Ports VLAN Mapping. - * port prt <--> cpu_port VLAN #prt+1. - */ - RD_PHY(name, ports_ofs + prt, - MV88E61XX_PRT_VID_REG, ®); - reg &= ~0x0fff; - reg |= (prt + 1); - WR_PHY(name, ports_ofs + prt, - MV88E61XX_PRT_VID_REG, reg); - - RD_PHY(name, ports_ofs + prt, - MV88E61XX_PRT_VMAP_REG, ®); - if (vlancfg == MV88E61XX_VLANCFG_DEFAULT) { - /* - * all any port can send frames to all other ports - * ref: sec 3.2.1.1 of datasheet - */ - reg |= 0x03f; - reg &= ~(1 << prt); - } else if (vlancfg == MV88E61XX_VLANCFG_ROUTER) { - /* - * all other ports can send frames to CPU port only - * ref: sec 3.2.1.2 of datasheet - */ - reg &= ~((1 << max_prtnum) - 1); - reg |= cpu_port; - } - WR_PHY(name, ports_ofs + prt, - MV88E61XX_PRT_VMAP_REG, reg); - } - } - } +/* + * Convenience macros for switch device/port reads/writes + * These macros output valid 'mv88e61xx' U_BOOT_CMDs + */ - /* - * enable only appropriate ports to forwarding mode - * and disable the others - */ - for (prt = 0; prt < max_prtnum; prt++) { - if ((1 << prt) & port_mask) { - RD_PHY(name, ports_ofs + prt, - MV88E61XX_PRT_CTRL_REG, ®); - reg |= 0x3; - WR_PHY(name, ports_ofs + prt, - MV88E61XX_PRT_CTRL_REG, reg); - } else { - /* Disable port */ - RD_PHY(name, ports_ofs + prt, - MV88E61XX_PRT_CTRL_REG, ®); - reg &= ~0x3; - WR_PHY(name, ports_ofs + prt, - MV88E61XX_PRT_CTRL_REG, reg); - } - } +#ifndef DEBUG +#define WR_SWITCH_REG wr_switch_reg +#define RD_SWITCH_REG rd_switch_reg +#define WR_SWITCH_PORT_REG(n, p, r, d) \ + WR_SWITCH_REG(n, (MV88E61XX_PRT_OFST+p), r, d) +#define RD_SWITCH_PORT_REG(n, p, r, d) \ + RD_SWITCH_REG(n, (MV88E61XX_PRT_OFST+p), r, d) +#else +static void WR_SWITCH_REG(char *name, u32 dev_adr, u32 reg_ofs, u16 data) +{ + printf("mv88e61xx %s dev %02x reg %02x write %04x\n", + name, dev_adr, reg_ofs, data); + wr_switch_reg(name, dev_adr, reg_ofs, data); } +static void RD_SWITCH_REG(char *name, u32 dev_adr, u32 reg_ofs, u16 *data) +{ + rd_switch_reg(name, dev_adr, reg_ofs, data); + printf("mv88e61xx %s dev %02x reg %02x read %04x\n", + name, dev_adr, reg_ofs, *data); +} +static void WR_SWITCH_PORT_REG(char *name, u32 prt_adr, u32 reg_ofs, + u16 data) +{ + printf("mv88e61xx %s port %02x reg %02x write %04x\n", + name, prt_adr, reg_ofs, data); + wr_switch_reg(name, (MV88E61XX_PRT_OFST+prt_adr), reg_ofs, data); +} +static void RD_SWITCH_PORT_REG(char *name, u32 prt_adr, u32 reg_ofs, + u16 *data) +{ + rd_switch_reg(name, (MV88E61XX_PRT_OFST+prt_adr), reg_ofs, data); + printf("mv88e61xx %s port %02x reg %02x read %04x\n", + name, prt_adr, reg_ofs, *data); +} +#endif + +/* + * Local functions to read/write registers on the switch PHYs. + * NOTE! This goes through switch, not direct miiphy, writes and reads! + */ /* * Make sure SMIBusy bit cleared before another @@ -204,7 +155,7 @@ static int mv88e61xx_busychk(char *name) u16 reg = 0; u32 timeout = MV88E61XX_PHY_TIMEOUT; do { - RD_PHY(name, MV88E61XX_GLB2REG_DEVADR, + rd_switch_reg(name, MV88E61XX_GLB2REG_DEVADR, MV88E61XX_PHY_CMD, ®); if (timeout-- == 0) { printf("SMI busy timeout\n"); @@ -214,34 +165,110 @@ static int mv88e61xx_busychk(char *name) return 0; } +static inline int mv88e61xx_switch_miiphy_write(char *name, u32 phy, + u32 reg, u16 data) +{ + /* write switch data reg then cmd reg then check completion */ + wr_switch_reg(name, MV88E61XX_GLB2REG_DEVADR, MV88E61XX_PHY_DATA, + data); + wr_switch_reg(name, MV88E61XX_GLB2REG_DEVADR, MV88E61XX_PHY_CMD, + (MV88E61XX_PHY_WRITE_CMD | (phy << 5) | reg)); + return mv88e61xx_busychk(name); +} + +static inline int mv88e61xx_switch_miiphy_read(char *name, u32 phy, + u32 reg, u16 *data) +{ + /* write switch cmd reg, check for completion */ + wr_switch_reg(name, MV88E61XX_GLB2REG_DEVADR, MV88E61XX_PHY_CMD, + (MV88E61XX_PHY_READ_CMD | (phy << 5) | reg)); + if (mv88e61xx_busychk(name)) + return -1; + /* read switch data reg and return success */ + rd_switch_reg(name, MV88E61XX_GLB2REG_DEVADR, MV88E61XX_PHY_DATA, data); + return 0; +} + +/* + * Convenience macros for switch PHY reads/writes + */ + +#ifndef DEBUG +#define WR_SWITCH_PHY_REG mv88e61xx_switch_miiphy_write +#define RD_SWITCH_PHY_REG mv88e61xx_switch_miiphy_read +#else +static inline int WR_SWITCH_PHY_REG(char *name, u32 phy_adr, + u32 reg_ofs, u16 data) +{ + int r = mv88e61xx_switch_miiphy_write(name, phy_adr, reg_ofs, data); + if (r) + printf("** ERROR writing mv88e61xx %s phy %02x reg %02x\n", + name, phy_adr, reg_ofs); + else + printf("mv88e61xx %s phy %02x reg %02x write %04x\n", + name, phy_adr, reg_ofs, data); + return r; +} +static inline int RD_SWITCH_PHY_REG(char *name, u32 phy_adr, + u32 reg_ofs, u16 *data) +{ + int r = mv88e61xx_switch_miiphy_read(name, phy_adr, reg_ofs, data); + if (r) + printf("** ERROR reading mv88e61xx %s phy %02x reg %02x\n", + name, phy_adr, reg_ofs); + else + printf("mv88e61xx %s phy %02x reg %02x read %04x\n", + name, phy_adr, reg_ofs, *data); + return r; +} +#endif + +static void mv88e61xx_port_vlan_config(struct mv88e61xx_config *swconfig) +{ + u32 prt; + u16 reg; + char *name = swconfig->name; + u32 port_mask = swconfig->ports_enabled; + + /* apply internal vlan config */ + for (prt = 0; prt < MV88E61XX_MAX_PORTS_NUM; prt++) { + /* only for enabled ports */ + if ((1 << prt) & port_mask) { + /* take vlan map from swconfig */ + u8 vlanmap = swconfig->vlancfg[prt]; + /* remove disabled ports from vlan map */ + vlanmap &= swconfig->ports_enabled; + /* apply vlan map to port */ + RD_SWITCH_PORT_REG(name, prt, + MV88E61XX_PRT_VMAP_REG, ®); + reg &= ~((1 << MV88E61XX_MAX_PORTS_NUM) - 1); + reg |= vlanmap; + WR_SWITCH_PORT_REG(name, prt, + MV88E61XX_PRT_VMAP_REG, reg); + } + } +} + /* * Power up the specified port and reset PHY */ -static int mv88361xx_powerup(struct mv88e61xx_config *swconfig, u32 prt) +static int mv88361xx_powerup(struct mv88e61xx_config *swconfig, u32 phy) { char *name = swconfig->name; - /* Write Copper Specific control reg1 (0x14) for- + /* Write Copper Specific control reg1 (0x10) for- * Enable Phy power up * Energy Detect on (sense&Xmit NLP Periodically * reset other settings default */ - WR_PHY(name, MV88E61XX_GLB2REG_DEVADR, MV88E61XX_PHY_DATA, 0x3360); - WR_PHY(name, MV88E61XX_GLB2REG_DEVADR, - MV88E61XX_PHY_CMD, (0x9410 | (prt << 5))); - - if (mv88e61xx_busychk(name)) + if (WR_SWITCH_PHY_REG(name, phy, 0x10, 0x3360)) return -1; /* Write PHY ctrl reg (0x0) to apply * Phy reset (set bit 15 low) * reset other default values */ - WR_PHY(name, MV88E61XX_GLB2REG_DEVADR, MV88E61XX_PHY_DATA, 0x1140); - WR_PHY(name, MV88E61XX_GLB2REG_DEVADR, - MV88E61XX_PHY_CMD, (0x9400 | (prt << 5))); - - if (mv88e61xx_busychk(name)) + if (WR_SWITCH_PHY_REG(name, phy, 0x00, 0x9140)) return -1; return 0; @@ -256,48 +283,26 @@ static int mv88361xx_powerup(struct mv88e61xx_config *swconfig, u32 prt) * to setup PHY LEDs default configuration to detect 10/100/1000Mb/s * Link status */ -static int mv88361xx_led_init(struct mv88e61xx_config *swconfig, u32 prt) +static int mv88361xx_led_init(struct mv88e61xx_config *swconfig, u32 phy) { char *name = swconfig->name; - u16 reg; if (swconfig->led_init != MV88E61XX_LED_INIT_EN) return 0; /* set page address to 3 */ - reg = 3; - WR_PHY(name, MV88E61XX_GLB2REG_DEVADR, MV88E61XX_PHY_DATA, reg); - WR_PHY(name, MV88E61XX_GLB2REG_DEVADR, - MV88E61XX_PHY_CMD, (1 << MV88E61XX_BUSY_OFST | - 1 << MV88E61XX_MODE_OFST | - 1 << MV88E61XX_OP_OFST | - prt << MV88E61XX_ADDR_OFST | 22)); - - if (mv88e61xx_busychk(name)) + if (WR_SWITCH_PHY_REG(name, phy, 0x16, 0x0003)) return -1; - /* set LED Func Ctrl reg */ - reg = 1; /* LED[0] On-Link, Blink-Activity, Off-NoLink */ - WR_PHY(name, MV88E61XX_GLB2REG_DEVADR, MV88E61XX_PHY_DATA, reg); - WR_PHY(name, MV88E61XX_GLB2REG_DEVADR, - MV88E61XX_PHY_CMD, (1 << MV88E61XX_BUSY_OFST | - 1 << MV88E61XX_MODE_OFST | - 1 << MV88E61XX_OP_OFST | - prt << MV88E61XX_ADDR_OFST | 16)); - - if (mv88e61xx_busychk(name)) + /* + * set LED Func Ctrl reg + * value 0x0001 = LED[0] On-Link, Blink-Activity, Off-NoLink + */ + if (WR_SWITCH_PHY_REG(name, phy, 0x10, 0x0001)) return -1; /* set page address to 0 */ - reg = 0; - WR_PHY(name, MV88E61XX_GLB2REG_DEVADR, MV88E61XX_PHY_DATA, reg); - WR_PHY(name, MV88E61XX_GLB2REG_DEVADR, - MV88E61XX_PHY_CMD, (1 << MV88E61XX_BUSY_OFST | - 1 << MV88E61XX_MODE_OFST | - 1 << MV88E61XX_OP_OFST | - prt << MV88E61XX_ADDR_OFST | 22)); - - if (mv88e61xx_busychk(name)) + if (WR_SWITCH_PHY_REG(name, phy, 0x16, 0x0000)) return -1; return 0; @@ -312,23 +317,15 @@ static int mv88361xx_led_init(struct mv88e61xx_config *swconfig, u32 prt) * This is optional settings may be needed on some boards * for PHY<->magnetics h/w tuning */ -static int mv88361xx_reverse_mdipn(struct mv88e61xx_config *swconfig, u32 prt) +static int mv88361xx_reverse_mdipn(struct mv88e61xx_config *swconfig, u32 phy) { char *name = swconfig->name; - u16 reg; if (swconfig->mdip != MV88E61XX_MDIP_REVERSE) return 0; - reg = 0x0f; /*Reverse MDIP/N[3:0] bits */ - WR_PHY(name, MV88E61XX_GLB2REG_DEVADR, MV88E61XX_PHY_DATA, reg); - WR_PHY(name, MV88E61XX_GLB2REG_DEVADR, - MV88E61XX_PHY_CMD, (1 << MV88E61XX_BUSY_OFST | - 1 << MV88E61XX_MODE_OFST | - 1 << MV88E61XX_OP_OFST | - prt << MV88E61XX_ADDR_OFST | 20)); - - if (mv88e61xx_busychk(name)) + /*Reverse MDIP/N[3:0] bits */ + if (WR_SWITCH_PHY_REG(name, phy, 0x14, 0x000f)) return -1; return 0; @@ -343,6 +340,7 @@ int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig) u16 reg; char *idstr; char *name = swconfig->name; + int time; if (miiphy_set_current_dev(name)) { printf("%s failed\n", __FUNCTION__); @@ -354,7 +352,7 @@ int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig) printf("Invalid cpu port config, using default port5\n"); } - RD_PHY(name, MV88E61XX_PRT_OFST, MII_PHYSID2, ®); + RD_SWITCH_PORT_REG(name, 0, MII_PHYSID2, ®); switch (reg &= 0xfff0) { case 0x1610: idstr = "88E6161"; @@ -373,46 +371,183 @@ int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig) break; } - /* Port based VLANs configuration */ - if ((swconfig->vlancfg == MV88E61XX_VLANCFG_DEFAULT) - || (swconfig->vlancfg == MV88E61XX_VLANCFG_ROUTER)) - mv88e61xx_port_vlan_config(swconfig, MV88E61XX_MAX_PORTS_NUM, - MV88E61XX_PRT_OFST); - else { - printf("Unsupported mode %s failed\n", __FUNCTION__); - return -1; + /* be sure all ports are disabled */ + for (prt = 0; prt < MV88E61XX_MAX_PORTS_NUM; prt++) { + RD_SWITCH_PORT_REG(name, prt, MV88E61XX_PRT_CTRL_REG, ®); + reg &= ~0x3; + WR_SWITCH_PORT_REG(name, prt, MV88E61XX_PRT_CTRL_REG, reg); } + /* wait 2 ms for queues to drain */ + udelay(2000); + + /* reset switch */ + RD_SWITCH_REG(name, MV88E61XX_GLBREG_DEVADR, MV88E61XX_SGCR, ®); + reg |= 0x8000; + WR_SWITCH_REG(name, MV88E61XX_GLBREG_DEVADR, MV88E61XX_SGCR, reg); + + /* wait up to 1 second for switch reset complete */ + for (time = 1000; time; time--) { + RD_SWITCH_REG(name, MV88E61XX_GLBREG_DEVADR, MV88E61XX_SGSR, + ®); + if ((reg & 0xc800) == 0xc800) + break; + udelay(1000); + } + if (!time) + return -1; + + /* Port based VLANs configuration */ + mv88e61xx_port_vlan_config(swconfig); + if (swconfig->rgmii_delay == MV88E61XX_RGMII_DELAY_EN) { /* * Enable RGMII delay on Tx and Rx for CPU port * Ref: sec 9.5 of chip datasheet-02 */ - WR_PHY(name, MV88E61XX_PRT_OFST + 5, - MV88E61XX_RGMII_TIMECTRL_REG, 0x18); - WR_PHY(name, MV88E61XX_PRT_OFST + 4, - MV88E61XX_RGMII_TIMECTRL_REG, 0xc1e7); + /*Force port link down */ + WR_SWITCH_PORT_REG(name, 5, MV88E61XX_PCS_CTRL_REG, 0x10); + /* configure port RGMII delay */ + WR_SWITCH_PORT_REG(name, 4, + MV88E61XX_RGMII_TIMECTRL_REG, 0x81e7); + RD_SWITCH_PORT_REG(name, 5, + MV88E61XX_RGMII_TIMECTRL_REG, ®); + WR_SWITCH_PORT_REG(name, 5, + MV88E61XX_RGMII_TIMECTRL_REG, reg | 0x18); + WR_SWITCH_PORT_REG(name, 4, + MV88E61XX_RGMII_TIMECTRL_REG, 0xc1e7); + /* Force port to RGMII FDX 1000Base then up */ + WR_SWITCH_PORT_REG(name, 5, MV88E61XX_PCS_CTRL_REG, 0x1e); + WR_SWITCH_PORT_REG(name, 5, MV88E61XX_PCS_CTRL_REG, 0x3e); } for (prt = 0; prt < MV88E61XX_MAX_PORTS_NUM; prt++) { - if (!((1 << prt) & swconfig->cpuport)) { - if (mv88361xx_led_init(swconfig, prt)) + /* configure port's PHY */ + if (!((1 << prt) & swconfig->cpuport)) { + /* port 4 has phy 6, not 4 */ + int phy = (prt == 4) ? 6 : prt; + if (mv88361xx_powerup(swconfig, phy)) return -1; - if (mv88361xx_reverse_mdipn(swconfig, prt)) + if (mv88361xx_reverse_mdipn(swconfig, phy)) return -1; - if (mv88361xx_powerup(swconfig, prt)) + if (mv88361xx_led_init(swconfig, phy)) return -1; } + /* set port VID to port+1 except for cpu port */ + if (!((1 << prt) & swconfig->cpuport)) { + RD_SWITCH_PORT_REG(name, prt, + MV88E61XX_PRT_VID_REG, ®); + WR_SWITCH_PORT_REG(name, prt, + MV88E61XX_PRT_VID_REG, + (reg & ~1023) | (prt+1)); + } + /*Program port state */ - RD_PHY(name, MV88E61XX_PRT_OFST + prt, - MV88E61XX_PRT_CTRL_REG, ®); - WR_PHY(name, MV88E61XX_PRT_OFST + prt, - MV88E61XX_PRT_CTRL_REG, - reg | (swconfig->portstate & 0x03)); + RD_SWITCH_PORT_REG(name, prt, + MV88E61XX_PRT_CTRL_REG, ®); + WR_SWITCH_PORT_REG(name, prt, + MV88E61XX_PRT_CTRL_REG, + reg | (swconfig->portstate & 0x03)); + } printf("%s Initialized on %s\n", idstr, name); return 0; } + +#ifdef CONFIG_MV88E61XX_CMD +static int +do_switch(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + char *name, *endp; + int write = 0; + enum { dev, prt, phy } target = dev; + u32 addrlo, addrhi, addr; + u32 reglo, reghi, reg; + u16 data, rdata; + + if (argc < 7) + return -1; + + name = argv[1]; + + if (strcmp(argv[2], "phy") == 0) + target = phy; + else if (strcmp(argv[2], "port") == 0) + target = prt; + else if (strcmp(argv[2], "dev") != 0) + return 1; + + addrlo = simple_strtoul(argv[3], &endp, 16); + + if (!*endp) { + addrhi = addrlo; + } else { + while (*endp < '0' || *endp > '9') + endp++; + addrhi = simple_strtoul(endp, NULL, 16); + } + + reglo = simple_strtoul(argv[5], &endp, 16); + if (!*endp) { + reghi = reglo; + } else { + while (*endp < '0' || *endp > '9') + endp++; + reghi = simple_strtoul(endp, NULL, 16); + } + + if (strcmp(argv[6], "write") == 0) + write = 1; + else if (strcmp(argv[6], "read") != 0) + return 1; + + data = simple_strtoul(argv[7], NULL, 16); + + for (addr = addrlo; addr <= addrhi; addr++) { + for (reg = reglo; reg <= reghi; reg++) { + if (write) { + if (target == phy) + mv88e61xx_switch_miiphy_write( + name, addr, reg, data); + else if (target == prt) + wr_switch_reg(name, + addr+MV88E61XX_PRT_OFST, + reg, data); + else + wr_switch_reg(name, addr, reg, data); + } else { + if (target == phy) + mv88e61xx_switch_miiphy_read( + name, addr, reg, &rdata); + else if (target == prt) + rd_switch_reg(name, + addr+MV88E61XX_PRT_OFST, + reg, &rdata); + else + rd_switch_reg(name, addr, reg, &rdata); + printf("%s %s %s %02x %s %02x %s %04x\n", + argv[0], argv[1], argv[2], addr, + argv[4], reg, argv[6], rdata); + if (write && argc == 7 && rdata != data) + return 1; + } + } + } + return 0; +} + +U_BOOT_CMD(mv88e61xx, 8, 0, do_switch, + "Read or write mv88e61xx switch registers", + "<ethdevice> dev|port|phy <addr> reg <reg> write <data>\n" + "<ethdevice> dev|port|phy <addr> reg <reg> read [<data>]\n" + " - read/write switch device, port or phy at (addr,reg)\n" + " addr=0..0x1C for dev, 0..5 for port or phy.\n" + " reg=0..0x1F.\n" + " data=0..0xFFFF (tested if present against actual read).\n" + " All numeric parameters are assumed to be hex.\n" + " <addr> and <<reg> arguments can be ranges (x..y)" +); +#endif /* CONFIG_MV88E61XX_CMD */ diff --git a/drivers/net/phy/mv88e61xx.h b/drivers/net/phy/mv88e61xx.h index 57762b6..55ded7e 100644 --- a/drivers/net/phy/mv88e61xx.h +++ b/drivers/net/phy/mv88e61xx.h @@ -28,35 +28,50 @@ #include <miiphy.h> #define MV88E61XX_CPU_PORT 0x5 -#define MV88E61XX_MAX_PORTS_NUM 0x6 #define MV88E61XX_PHY_TIMEOUT 100000 -#define MV88E61XX_PRT_STS_REG 0x1 +/* port dev-addr (= port + 0x10) */ +#define MV88E61XX_PRT_OFST 0x10 +/* port registers */ +#define MV88E61XX_PCS_CTRL_REG 0x1 #define MV88E61XX_PRT_CTRL_REG 0x4 #define MV88E61XX_PRT_VMAP_REG 0x6 #define MV88E61XX_PRT_VID_REG 0x7 +#define MV88E61XX_RGMII_TIMECTRL_REG 0x1A -#define MV88E61XX_PRT_OFST 0x10 +/* global registers dev-addr */ +#define MV88E61XX_GLBREG_DEVADR 0x1B +/* global registers */ +#define MV88E61XX_SGSR 0x00 +#define MV88E61XX_SGCR 0x04 + +/* global 2 registers dev-addr */ +#define MV88E61XX_GLB2REG_DEVADR 0x1C +/* global 2 registers */ #define MV88E61XX_PHY_CMD 0x18 #define MV88E61XX_PHY_DATA 0x19 -#define MV88E61XX_RGMII_TIMECTRL_REG 0x1A -#define MV88E61XX_GLB2REG_DEVADR 0x1C +/* global 2 phy commands */ +#define MV88E61XX_PHY_WRITE_CMD 0x9400 +#define MV88E61XX_PHY_READ_CMD 0x9800 #define MV88E61XX_BUSY_OFST 15 #define MV88E61XX_MODE_OFST 12 -#define MV88E61XX_OP_OFST 10 +#define MV88E61XX_OP_OFST 10 #define MV88E61XX_ADDR_OFST 5 #ifdef CONFIG_MV88E61XX_MULTICHIP_ADRMODE static int mv88e61xx_busychk_multic(char *name, u32 devaddr); -static void mv88e61xx_wr_phy(char *name, u32 phy_adr, u32 reg_ofs, u16 data); -static void mv88e61xx_rd_phy(char *name, u32 phy_adr, u32 reg_ofs, u16 * data); -#define WR_PHY mv88e61xx_wr_phy -#define RD_PHY mv88e61xx_rd_phy +static void mv88e61xx_switch_write(char *name, u32 phy_adr, + u32 reg_ofs, u16 data); +static void mv88e61xx_switch_read(char *name, u32 phy_adr, + u32 reg_ofs, u16 *data); +#define wr_switch_reg mv88e61xx_switch_write +#define rd_switch_reg mv88e61xx_switch_read #else -#define WR_PHY miiphy_write -#define RD_PHY miiphy_read +/* switch appears a s simple PHY and can thus use miiphy */ +#define wr_switch_reg miiphy_write +#define rd_switch_reg miiphy_read #endif /* CONFIG_MV88E61XX_MULTICHIP_ADRMODE */ #endif /* _MV88E61XX_H */ diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c index a7cda75..de81064 100644 --- a/drivers/spi/kirkwood_spi.c +++ b/drivers/spi/kirkwood_spi.c @@ -41,7 +41,10 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, { struct spi_slave *slave; u32 data; - u32 kwspi_mpp_config[] = { 0, 0 }; + static const u32 kwspi_mpp_config[2][2] = { + { MPP0_SPI_SCn, 0 }, /* if cs == 0 */ + { MPP7_SPI_SCn, 0 } /* if cs != 0 */ + }; if (!spi_cs_is_valid(bus, cs)) return NULL; @@ -68,12 +71,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, writel(KWSPI_IRQMASK, &spireg->irq_mask); /* program mpp registers to select SPI_CSn */ - if (cs) { - kwspi_mpp_config[0] = MPP7_SPI_SCn; - } else { - kwspi_mpp_config[0] = MPP0_SPI_SCn; - } - kirkwood_mpp_conf(kwspi_mpp_config, cs_spi_mpp_back); + kirkwood_mpp_conf(kwspi_mpp_config[cs ? 1 : 0], cs_spi_mpp_back); return slave; } diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index 05480d4..f64748e 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -253,9 +253,6 @@ "load=tftpboot ${load_addr_r} ${u-boot}\0" \ "mtdids=" MTDIDS_DEFAULT "\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "stderr=serial\0" \ - "stdin=serial\0" \ - "stdout=serial\0" \ "" #endif /* CONFIG_KM_DEF_ENV */ diff --git a/include/configs/lsxl.h b/include/configs/lsxl.h index 8097f28..59f151a 100644 --- a/include/configs/lsxl.h +++ b/include/configs/lsxl.h @@ -146,7 +146,7 @@ "config_nc_dhcp=setenv autoload_old ${autoload}; " \ "setenv autoload no " \ "&& bootp " \ - "&& setenv ncip ${serverip} " \ + "&& setenv ncip " \ "&& setenv autoload ${autoload_old}; " \ "setenv autoload_old\0" \ "standard_env=setenv ipaddr; setenv netmask; setenv serverip; " \ diff --git a/include/configs/mv-common.h b/include/configs/mv-common.h index 7086d1d..405a842 100644 --- a/include/configs/mv-common.h +++ b/include/configs/mv-common.h @@ -92,7 +92,7 @@ /* * Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* 1MiB for malloc() */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024 * 4) /* 4MiB for malloc() */ /* * Other required minimal configurations diff --git a/include/configs/wireless_space.h b/include/configs/wireless_space.h new file mode 100644 index 0000000..eb20492 --- /dev/null +++ b/include/configs/wireless_space.h @@ -0,0 +1,194 @@ +/* + * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net> + * + * Based on the netspace_v2 code which is + * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _CONFIG_WIRELESS_SPACE_H +#define _CONFIG_WIRELESS_SPACE_H + +/* + * Machine number definition + */ +#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */ +#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE +#define CONFIG_IDENT_STRING " Wireless Space" + +/* + * High Level Configuration Options (easy to change) + */ +#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ +#define CONFIG_KIRKWOOD /* SoC Family Name */ +/* SoC name */ +#define CONFIG_KW88F6281 +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ + +/* + * Commands configuration + */ +#define CONFIG_SYS_NO_FLASH /* no NOR or SPI flash */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_PING +#define CONFIG_CMD_NAND +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IDE +#define CONFIG_CMD_USB + +/* + * Core clock definition + */ +#define CONFIG_SYS_TCLK 166000000 /* 166MHz */ + +/* + * SDRAM configuration + */ +#define CONFIG_NR_DRAM_BANKS 1 + +/* + * Different SDRAM configuration and size for some of the boards derived + * from the Network Space v2 + */ + +/* + * mv-common.h should be defined after CMD configs since it used them + * to enable certain macros + */ +#include "mv-common.h" + +/* Remove or override few declarations from mv-common.h */ +#undef CONFIG_RBTREE +#undef CONFIG_SYS_IDE_MAXBUS +#undef CONFIG_SYS_IDE_MAXDEVICE +#define CONFIG_SYS_IDE_MAXBUS 1 +#define CONFIG_SYS_IDE_MAXDEVICE 1 +#undef CONFIG_SYS_PROMPT +#define CONFIG_SYS_PROMPT "ws> " + +/* + * Ethernet Driver configuration + */ +#ifdef CONFIG_CMD_NET +#define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */ +#define CONFIG_MVGBE_PORTS {1, 0} /* enable only egiga0... */ +#define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */ +#define CONFIG_PHY_BASE_ADR 0xa /* ... through a 'fake' PHY */ +#define CONFIG_MII +#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN +#define CONFIG_NETCONSOLE +#define CONFIG_MV88E61XX_SWITCH +#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE +#define CONFIG_MV88E61XX_CMD +#define CONFIG_CMD_TFTPPUT +#endif /* CONFIG_CMD_NET */ + +/* + * SATA Driver configuration + */ +#ifdef CONFIG_MVSATA_IDE +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET +#endif /* CONFIG_MVSATA_IDE */ + +/* + * Enable GPI0 support + */ +#define CONFIG_KIRKWOOD_GPIO + +/* + * Enable I2C support + */ +#ifdef CONFIG_CMD_I2C +/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */ +#define CONFIG_CMD_EEPROM +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */ +#endif /* CONFIG_CMD_I2C */ + +/* + * Partition support + */ +#define CONFIG_DOS_PARTITION +#define CONFIG_EFI_PARTITION + +/* + * File systems support + */ +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT + +/* + * Use the HUSH parser + */ +#define CONFIG_SYS_HUSH_PARSER + +/* + * Console configuration + */ +#define CONFIG_CONSOLE_MUX +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/* + * Enable device tree support + */ +#define CONFIG_OF_LIBFDT + +/* + * Environment variables configurations + */ + +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */ +#define CONFIG_ENV_SIZE 0x20000 /* 128KB */ +#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ + +/* + * Board-specific command to make using buttons etc easier + */ + +#define CONFIG_WIRELESS_SPACE_CMD + +/* + * Default environment variables + */ +#define CONFIG_PREBOOT + +#define CONFIG_BOOTARGS "console=ttyS0,115200" + +#define CONFIG_BOOTCOMMAND \ + "if run usbload || run diskload; then bootm; fi" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" \ + "bootfile=uImage\0" \ + "loadaddr=0x800000\0" \ + "autoload=no\0" \ + "netconsole=" \ + "set stdin $stdin,nc; " \ + "set stdout $stdout,nc; " \ + "set stderr $stderr,nc;\0" \ + "diskload=ide reset && " \ + "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \ + "usbload=usb start && " \ + "fatload usb 0:1 $loadaddr /boot/$bootfile\0" \ + "preboot=" \ + "dhcp && run netconsole\0" + +#endif /* _CONFIG_WIRELESS_SPACE_H */ diff --git a/include/netdev.h b/include/netdev.h index b8d303d..7f158d4 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -163,10 +163,9 @@ static inline int pci_eth_init(bd_t *bis) * the stuct and enums here are used to specify switch configuration params */ #if defined(CONFIG_MV88E61XX_SWITCH) -enum mv88e61xx_cfg_vlan { - MV88E61XX_VLANCFG_DEFAULT, - MV88E61XX_VLANCFG_ROUTER -}; + +/* constants for any 88E61xx switch */ +#define MV88E61XX_MAX_PORTS_NUM 6 enum mv88e61xx_cfg_mdip { MV88E61XX_MDIP_NOCHANGE, @@ -192,7 +191,7 @@ enum mv88e61xx_cfg_prtstt { struct mv88e61xx_config { char *name; - enum mv88e61xx_cfg_vlan vlancfg; + u8 vlancfg[MV88E61XX_MAX_PORTS_NUM]; enum mv88e61xx_cfg_rgmiid rgmii_delay; enum mv88e61xx_cfg_prtstt portstate; enum mv88e61xx_cfg_ledinit led_init; @@ -201,6 +200,18 @@ struct mv88e61xx_config { u8 cpuport; }; +/* + * Common mappings for Internal VLANs + * These mappings consider that all ports are useable; the driver + * will mask inexistent/unused ports. + */ + +/* Switch mode : routes any port to any port */ +#define MV88E61XX_VLANCFG_SWITCH { 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F } + +/* Router mode: routes only CPU port 5 to/from non-CPU ports 0-4 */ +#define MV88E61XX_VLANCFG_ROUTER { 0x20, 0x20, 0x20, 0x20, 0x20, 0x1F } + int mv88e61xx_switch_initialize(struct mv88e61xx_config *swconfig); #endif /* CONFIG_MV88E61XX_SWITCH */ |