diff options
-rw-r--r-- | drivers/gpio/Makefile | 1 | ||||
-rw-r--r-- | drivers/gpio/mvmfp.c | 87 | ||||
-rw-r--r-- | include/mvmfp.h | 100 |
3 files changed, 188 insertions, 0 deletions
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 398024c..a5fa2b5 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -27,6 +27,7 @@ LIB := $(obj)libgpio.o COBJS-$(CONFIG_AT91_GPIO) += at91_gpio.o COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o +COBJS-$(CONFIG_MARVELL_MFP) += mvmfp.o COBJS-$(CONFIG_MXC_GPIO) += mxc_gpio.o COBJS-$(CONFIG_PCA953X) += pca953x.o COBJS-$(CONFIG_S5P) += s5p_gpio.o diff --git a/drivers/gpio/mvmfp.c b/drivers/gpio/mvmfp.c new file mode 100644 index 0000000..5646ed4 --- /dev/null +++ b/drivers/gpio/mvmfp.c @@ -0,0 +1,87 @@ +/* + * (C) Copyright 2010 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com>, + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <mvmfp.h> +#include <asm/arch/mfp.h> +#ifdef CONFIG_ARMADA100 +#include <asm/arch/armada100.h> +#else +#error Unsupported SoC... +#endif + +/* + * mfp_config + * + * On most of Marvell SoCs (ex. ARMADA100) there is Multi-Funtion-Pin + * configuration registers to configure each GPIO/Function pin on the + * SoC. + * + * This function reads the array of values for + * MFPR_X registers and programms them into respective + * Multi-Function Pin registers. + * It supports - Alternate Function Selection programming. + * + * Whereas, + * The Configureation value is constructed using MFP() + * array consists of 32bit values as defined in MFP(xx,xx..) macro + */ +void mfp_config(u32 *mfp_cfgs) +{ + u32 *p_mfpr = NULL; + u32 cfg_val, val; + + do { + cfg_val = *mfp_cfgs++; + /* exit if End of configuration table detected */ + if (cfg_val == MFP_EOC) + break; + + p_mfpr = (u32 *)(MV_MFPR_BASE + + MFP_REG_GET_OFFSET(cfg_val)); + + /* Write a mfg register as per configuration */ + val = 0; + if (cfg_val & MFP_AF_FLAG) + /* Abstract and program Afternate-Func Selection */ + val |= cfg_val & MFP_AF_MASK; + if (cfg_val & MFP_EDGE_FLAG) + /* Abstract and program Edge configuration */ + val |= cfg_val & MFP_LPM_EDGE_MASK; + if (cfg_val & MFP_DRIVE_FLAG) + /* Abstract and program Drive configuration */ + val |= cfg_val & MFP_DRIVE_MASK; + if (cfg_val & MFP_PULL_FLAG) + /* Abstract and program Pullup/down configuration */ + val |= cfg_val & MFP_PULL_MASK; + + writel(val, p_mfpr); + } while (1); + /* + * perform a read-back of any MFPR register to make sure the + * previous writings are finished + */ + readl(p_mfpr); +} diff --git a/include/mvmfp.h b/include/mvmfp.h new file mode 100644 index 0000000..0b36393 --- /dev/null +++ b/include/mvmfp.h @@ -0,0 +1,100 @@ +/* + * (C) Copyright 2010 + * Marvell Semiconductor <www.marvell.com> + * Written-by: Prafulla Wadaskar <prafulla@marvell.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA + */ + +#ifndef __MVMFP_H +#define __MVMFP_H + +/* + * Header file for MultiFunctionPin (MFP) Configururation framework + * + * Processors Supported: + * 1. Marvell ARMADA100 Processors + * + * processor to be supported should be added here + */ + +/* + * MFP configuration is represented by a 32-bit unsigned integer + */ +#define MFP(_off, _pull, _pF, _drv, _dF, _edge, _eF, _afn, _aF) ( \ + /* bits 31..16 - MFP Register Offset */ (((_off) & 0xffff) << 16) | \ + /* bits 15..13 - Run Mode Pull State */ (((_pull) & 0x7) << 13) | \ + /* bit 12 - Unused */ \ + /* bits 11..10 - Driver Strength */ (((_drv) & 0x3) << 10) | \ + /* bit 09 - Pull State flag */ (((_pF) & 0x1) << 9) | \ + /* bit 08 - Drv-strength flag */ (((_dF) & 0x1) << 8) | \ + /* bit 07 - Edge-det flag */ (((_eF) & 0x1) << 7) | \ + /* bits 06..04 - Edge Detection */ (((_edge) & 0x7) << 4) | \ + /* bits 03..00 - Alt-fun flag */ (((_aF) & 0x1) << 3) | \ + /* bits Alternate-fun select */ ((_afn) & 0x7)) + +/* + * to facilitate the definition, the following macros are provided + * + * offset, pull,pF, drv,dF, edge,eF ,afn,aF + */ +#define MFP_OFFSET_MASK MFP(0xffff, 0,0, 0,0, 0,0, 0,0) +#define MFP_REG(x) MFP(x, 0,0, 0,0, 0,0, 0,0) +#define MFP_REG_GET_OFFSET(x) ((x & MFP_OFFSET_MASK) >> 16) + +#define MFP_AF_FLAG MFP(0x0000, 0,0, 0,0, 0,0, 0,1) +#define MFP_DRIVE_FLAG MFP(0x0000, 0,0, 0,1, 0,0, 0,0) +#define MFP_EDGE_FLAG MFP(0x0000, 0,0, 0,0, 0,1, 0,0) +#define MFP_PULL_FLAG MFP(0x0000, 0,1, 0,0, 0,0, 0,0) + +#define MFP_AF0 MFP(0x0000, 0,0, 0,0, 0,0, 0,1) +#define MFP_AF1 MFP(0x0000, 0,0, 0,0, 0,0, 1,1) +#define MFP_AF2 MFP(0x0000, 0,0, 0,0, 0,0, 2,1) +#define MFP_AF3 MFP(0x0000, 0,0, 0,0, 0,0, 3,1) +#define MFP_AF4 MFP(0x0000, 0,0, 0,0, 0,0, 4,1) +#define MFP_AF5 MFP(0x0000, 0,0, 0,0, 0,0, 5,1) +#define MFP_AF6 MFP(0x0000, 0,0, 0,0, 0,0, 6,1) +#define MFP_AF7 MFP(0x0000, 0,0, 0,0, 0,0, 7,1) +#define MFP_AF_MASK MFP(0x0000, 0,0, 0,0, 0,0, 7,0) + +#define MFP_LPM_EDGE_NONE MFP(0x0000, 0,0, 0,0, 0,1, 0,0) +#define MFP_LPM_EDGE_RISE MFP(0x0000, 0,0, 0,0, 1,1, 0,0) +#define MFP_LPM_EDGE_FALL MFP(0x0000, 0,0, 0,0, 2,1, 0,0) +#define MFP_LPM_EDGE_BOTH MFP(0x0000, 0,0, 0,0, 3,1, 0,0) +#define MFP_LPM_EDGE_MASK MFP(0x0000, 0,0, 0,0, 3,0, 0,0) + +#define MFP_DRIVE_VERY_SLOW MFP(0x0000, 0,0, 0,1, 0,0, 0,0) +#define MFP_DRIVE_SLOW MFP(0x0000, 0,0, 1,1, 0,0, 0,0) +#define MFP_DRIVE_MEDIUM MFP(0x0000, 0,0, 2,1, 0,0, 0,0) +#define MFP_DRIVE_FAST MFP(0x0000, 0,0, 3,1, 0,0, 0,0) +#define MFP_DRIVE_MASK MFP(0x0000, 0,0, 3,0, 0,0, 0,0) + +#define MFP_PULL_NONE MFP(0x0000, 0,1, 0,0, 0,0, 0,0) +#define MFP_PULL_LOW MFP(0x0000, 1,1, 0,0, 0,0, 0,0) +#define MFP_PULL_HIGH MFP(0x0000, 2,1, 0,0, 0,0, 0,0) +#define MFP_PULL_BOTH MFP(0x0000, 3,1, 0,0, 0,0, 0,0) +#define MFP_PULL_FLOAT MFP(0x0000, 4,1, 0,0, 0,0, 0,0) +#define MFP_PULL_MASK MFP(0x0000, 7,0, 0,0, 0,0, 0,0) + +#define MFP_EOC 0xffffffff /* indicates end-of-conf */ + +/* Functions */ +void mfp_config(u32 *mfp_cfgs); + +#endif /* __MVMFP_H */ |