diff options
| -rw-r--r-- | drivers/net/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/ns7520_eth.c | 850 | ||||
| -rw-r--r-- | include/ns7520_eth.h | 336 | ||||
| -rw-r--r-- | net/eth.c | 4 |
4 files changed, 0 insertions, 1191 deletions
diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 2651e5f..3f845d6 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -61,7 +61,6 @@ COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o COBJS-$(CONFIG_DRIVER_NETARMETH) += netarm_eth.o COBJS-$(CONFIG_NETCONSOLE) += netconsole.o -COBJS-$(CONFIG_DRIVER_NS7520_ETHERNET) += ns7520_eth.o COBJS-$(CONFIG_NS8382X) += ns8382x.o COBJS-$(CONFIG_DRIVER_NS9750_ETHERNET) += ns9750_eth.o COBJS-$(CONFIG_PCNET) += pcnet.o diff --git a/drivers/net/ns7520_eth.c b/drivers/net/ns7520_eth.c deleted file mode 100644 index de82b04..0000000 --- a/drivers/net/ns7520_eth.c +++ /dev/null @@ -1,850 +0,0 @@ -/*********************************************************************** - * - * Copyright (C) 2005 by Videon Central, Inc. - * - * $Id$ - * @Author: Arthur Shipkowski - * @Descr: Ethernet driver for the NS7520. Uses polled Ethernet, like - * the older netarmeth driver. Note that attempting to filter - * broadcast and multicast out in the SAFR register will cause - * bad things due to released errata. - * @References: [1] NS7520 Hardware Reference, December 2003 - * [2] Intel LXT971 Datasheet #249414 Rev. 02 - * - ***********************************************************************/ - -#include <common.h> - -#include <net.h> /* NetSendPacket */ -#include <asm/arch/netarm_registers.h> -#include <asm/arch/netarm_dma_module.h> - -#include "ns7520_eth.h" /* for Ethernet and PHY */ - -/** - * Send an error message to the terminal. - */ -#define ERROR(x) \ -do { \ - char *__foo = strrchr(__FILE__, '/'); \ - \ - printf("%s: %d: %s(): ", (__foo == NULL ? __FILE__ : (__foo + 1)), \ - __LINE__, __FUNCTION__); \ - printf x; printf("\n"); \ -} while (0); - -/* some definition to make transistion to linux easier */ - -#define NS7520_DRIVER_NAME "eth" -#define KERN_WARNING "Warning:" -#define KERN_ERR "Error:" -#define KERN_INFO "Info:" - -#if 1 -# define DEBUG -#endif - -#ifdef DEBUG -# define printk printf - -# define DEBUG_INIT 0x0001 -# define DEBUG_MINOR 0x0002 -# define DEBUG_RX 0x0004 -# define DEBUG_TX 0x0008 -# define DEBUG_INT 0x0010 -# define DEBUG_POLL 0x0020 -# define DEBUG_LINK 0x0040 -# define DEBUG_MII 0x0100 -# define DEBUG_MII_LOW 0x0200 -# define DEBUG_MEM 0x0400 -# define DEBUG_ERROR 0x4000 -# define DEBUG_ERROR_CRIT 0x8000 - -static int nDebugLvl = DEBUG_ERROR_CRIT; - -# define DEBUG_ARGS0( FLG, a0 ) if( ( nDebugLvl & (FLG) ) == (FLG) ) \ - printf("%s: " a0, __FUNCTION__, 0, 0, 0, 0, 0, 0 ) -# define DEBUG_ARGS1( FLG, a0, a1 ) if( ( nDebugLvl & (FLG) ) == (FLG)) \ - printf("%s: " a0, __FUNCTION__, (int)(a1), 0, 0, 0, 0, 0 ) -# define DEBUG_ARGS2( FLG, a0, a1, a2 ) if( (nDebugLvl & (FLG)) ==(FLG))\ - printf("%s: " a0, __FUNCTION__, (int)(a1), (int)(a2), 0, 0,0,0 ) -# define DEBUG_ARGS3( FLG, a0, a1, a2, a3 ) if((nDebugLvl &(FLG))==(FLG))\ - printf("%s: "a0,__FUNCTION__,(int)(a1),(int)(a2),(int)(a3),0,0,0) -# define DEBUG_FN( FLG ) if( (nDebugLvl & (FLG)) == (FLG) ) \ - printf("\r%s:line %d\n", (int)__FUNCTION__, __LINE__, 0,0,0,0); -# define ASSERT( expr, func ) if( !( expr ) ) { \ - printf( "Assertion failed! %s:line %d %s\n", \ - (int)__FUNCTION__,__LINE__,(int)(#expr),0,0,0); \ - func } -#else /* DEBUG */ -# define printk(...) -# define DEBUG_ARGS0( FLG, a0 ) -# define DEBUG_ARGS1( FLG, a0, a1 ) -# define DEBUG_ARGS2( FLG, a0, a1, a2 ) -# define DEBUG_ARGS3( FLG, a0, a1, a2, a3 ) -# define DEBUG_FN( n ) -# define ASSERT(expr, func) -#endif /* DEBUG */ - -#define NS7520_MII_NEG_DELAY (5*CONFIG_SYS_HZ) /* in s */ -#define TX_TIMEOUT (5*CONFIG_SYS_HZ) /* in s */ -#define RX_STALL_WORKAROUND_CNT 100 - -static int ns7520_eth_reset(void); - -static void ns7520_link_auto_negotiate(void); -static void ns7520_link_update_egcr(void); -static void ns7520_link_print_changed(void); - -/* the PHY stuff */ - -static char ns7520_mii_identify_phy(void); -static unsigned short ns7520_mii_read(unsigned short uiRegister); -static void ns7520_mii_write(unsigned short uiRegister, - unsigned short uiData); -static unsigned int ns7520_mii_get_clock_divisor(unsigned int - unMaxMDIOClk); -static unsigned int ns7520_mii_poll_busy(void); - -static unsigned int nPhyMaxMdioClock = PHY_MDIO_MAX_CLK; -static unsigned int uiLastLinkStatus; -static PhyType phyDetected = PHY_NONE; - -/*********************************************************************** - * @Function: eth_init - * @Return: -1 on failure otherwise 0 - * @Descr: Initializes the ethernet engine and uses either FS Forth's default - * MAC addr or the one in environment - ***********************************************************************/ - -int eth_init(bd_t * pbis) -{ - unsigned char aucMACAddr[6]; - char *pcTmp = getenv("ethaddr"); - char *pcEnd; - int i; - - DEBUG_FN(DEBUG_INIT); - - /* no need to check for hardware */ - - if (!ns7520_eth_reset()) - return -1; - - if (NULL == pcTmp) - return -1; - - for (i = 0; i < 6; i++) { - aucMACAddr[i] = - pcTmp ? simple_strtoul(pcTmp, &pcEnd, 16) : 0; - pcTmp = (*pcTmp) ? pcEnd + 1 : pcEnd; - } - - /* configure ethernet address */ - - *get_eth_reg_addr(NS7520_ETH_SA1) = - aucMACAddr[5] << 8 | aucMACAddr[4]; - *get_eth_reg_addr(NS7520_ETH_SA2) = - aucMACAddr[3] << 8 | aucMACAddr[2]; - *get_eth_reg_addr(NS7520_ETH_SA3) = - aucMACAddr[1] << 8 | aucMACAddr[0]; - - /* enable hardware */ - - *get_eth_reg_addr(NS7520_ETH_MAC1) = NS7520_ETH_MAC1_RXEN; - *get_eth_reg_addr(NS7520_ETH_SUPP) = NS7520_ETH_SUPP_JABBER; - *get_eth_reg_addr(NS7520_ETH_MAC1) = NS7520_ETH_MAC1_RXEN; - - /* the linux kernel may give packets < 60 bytes, for example arp */ - *get_eth_reg_addr(NS7520_ETH_MAC2) = NS7520_ETH_MAC2_CRCEN | - NS7520_ETH_MAC2_PADEN | NS7520_ETH_MAC2_HUGE; - - /* Broadcast/multicast allowed; if you don't set this even unicast chokes */ - /* Based on NS7520 errata documentation */ - *get_eth_reg_addr(NS7520_ETH_SAFR) = - NS7520_ETH_SAFR_BROAD | NS7520_ETH_SAFR_PRM; - - /* enable receive and transmit FIFO, use 10/100 Mbps MII */ - *get_eth_reg_addr(NS7520_ETH_EGCR) |= - NS7520_ETH_EGCR_ETXWM_75 | - NS7520_ETH_EGCR_ERX | - NS7520_ETH_EGCR_ERXREG | - NS7520_ETH_EGCR_ERXBR | NS7520_ETH_EGCR_ETX; - - return 0; -} - -/*********************************************************************** - * @Function: eth_send - * @Return: -1 on timeout otherwise 1 - * @Descr: sends one frame by DMA - ***********************************************************************/ - -int eth_send(volatile void *pPacket, int nLen) -{ - int i, length32, retval = 1; - char *pa; - unsigned int *pa32, lastp = 0, rest; - unsigned int status; - - pa = (char *) pPacket; - pa32 = (unsigned int *) pPacket; - length32 = nLen / 4; - rest = nLen % 4; - - /* make sure there's no garbage in the last word */ - switch (rest) { - case 0: - lastp = pa32[length32 - 1]; - length32--; - break; - case 1: - lastp = pa32[length32] & 0x000000ff; - break; - case 2: - lastp = pa32[length32] & 0x0000ffff; - break; - case 3: - lastp = pa32[length32] & 0x00ffffff; - break; - } - - while (((*get_eth_reg_addr(NS7520_ETH_EGSR)) & - NS7520_ETH_EGSR_TXREGE) - == 0) { - } - - /* write to the fifo */ - for (i = 0; i < length32; i++) - *get_eth_reg_addr(NS7520_ETH_FIFO) = pa32[i]; - - /* the last word is written to an extra register, this - starts the transmission */ - *get_eth_reg_addr(NS7520_ETH_FIFOL) = lastp; - - /* Wait for it to be done */ - while ((*get_eth_reg_addr(NS7520_ETH_EGSR) & NS7520_ETH_EGSR_TXBC) - == 0) { - } - status = (*get_eth_reg_addr(NS7520_ETH_ETSR)); - *get_eth_reg_addr(NS7520_ETH_EGSR) = NS7520_ETH_EGSR_TXBC; /* Clear it now */ - - if (status & NS7520_ETH_ETSR_TXOK) { - retval = 0; /* We're OK! */ - } else if (status & NS7520_ETH_ETSR_TXDEF) { - printf("Deferred, we'll see.\n"); - retval = 0; - } else if (status & NS7520_ETH_ETSR_TXAL) { - printf("Late collision error, %d collisions.\n", - (*get_eth_reg_addr(NS7520_ETH_ETSR)) & - NS7520_ETH_ETSR_TXCOLC); - } else if (status & NS7520_ETH_ETSR_TXAEC) { - printf("Excessive collisions: %d\n", - (*get_eth_reg_addr(NS7520_ETH_ETSR)) & - NS7520_ETH_ETSR_TXCOLC); - } else if (status & NS7520_ETH_ETSR_TXAED) { - printf("Excessive deferral on xmit.\n"); - } else if (status & NS7520_ETH_ETSR_TXAUR) { - printf("Packet underrun.\n"); - } else if (status & NS7520_ETH_ETSR_TXAJ) { - printf("Jumbo packet error.\n"); - } else { - printf("Error: Should never get here.\n"); - } - - return (retval); -} - -/*********************************************************************** - * @Function: eth_rx - * @Return: size of last frame in bytes or 0 if no frame available - * @Descr: gives one frame to U-Boot which has been copied by DMA engine already - * to NetRxPackets[ 0 ]. - ***********************************************************************/ - -int eth_rx(void) -{ - int i; - unsigned short rxlen; - unsigned short totrxlen = 0; - unsigned int *addr; - unsigned int rxstatus, lastrxlen; - char *pa; - - /* If RXBR is 1, data block was received */ - while (((*get_eth_reg_addr(NS7520_ETH_EGSR)) & - NS7520_ETH_EGSR_RXBR) == NS7520_ETH_EGSR_RXBR) { - - /* get status register and the length of received block */ - rxstatus = *get_eth_reg_addr(NS7520_ETH_ERSR); - rxlen = (rxstatus & NS7520_ETH_ERSR_RXSIZE) >> 16; - - /* clear RXBR to make fifo available */ - *get_eth_reg_addr(NS7520_ETH_EGSR) = NS7520_ETH_EGSR_RXBR; - - if (rxstatus & NS7520_ETH_ERSR_ROVER) { - printf("Receive overrun, resetting FIFO.\n"); - *get_eth_reg_addr(NS7520_ETH_EGCR) &= - ~NS7520_ETH_EGCR_ERX; - udelay(20); - *get_eth_reg_addr(NS7520_ETH_EGCR) |= - NS7520_ETH_EGCR_ERX; - } - if (rxlen == 0) { - printf("Nothing.\n"); - return 0; - } - - addr = (unsigned int *) NetRxPackets[0]; - pa = (char *) NetRxPackets[0]; - - /* read the fifo */ - for (i = 0; i < rxlen / 4; i++) { - *addr = *get_eth_reg_addr(NS7520_ETH_FIFO); - addr++; - } - - if ((*get_eth_reg_addr(NS7520_ETH_EGSR)) & - NS7520_ETH_EGSR_RXREGR) { - /* RXFDB indicates wether the last word is 1,2,3 or 4 bytes long */ - lastrxlen = - ((*get_eth_reg_addr(NS7520_ETH_EGSR)) & - NS7520_ETH_EGSR_RXFDB_MA) >> 28; - *addr = *get_eth_reg_addr(NS7520_ETH_FIFO); - switch (lastrxlen) { - case 1: - *addr &= 0xff000000; - break; - case 2: - *addr &= 0xffff0000; - break; - case 3: - *addr &= 0xffffff00; - break; - } - } - - /* Pass the packet up to the protocol layers. */ - NetReceive(NetRxPackets[0], rxlen - 4); - totrxlen += rxlen - 4; - } - - return totrxlen; -} - -/*********************************************************************** - * @Function: eth_halt - * @Return: n/a - * @Descr: stops the ethernet engine - ***********************************************************************/ - -void eth_halt(void) -{ - DEBUG_FN(DEBUG_INIT); - - *get_eth_reg_addr(NS7520_ETH_MAC1) &= ~NS7520_ETH_MAC1_RXEN; - *get_eth_reg_addr(NS7520_ETH_EGCR) &= ~(NS7520_ETH_EGCR_ERX | - NS7520_ETH_EGCR_ERXDMA | - NS7520_ETH_EGCR_ERXREG | - NS7520_ETH_EGCR_ERXBR | - NS7520_ETH_EGCR_ETX | - NS7520_ETH_EGCR_ETXDMA); -} - -/*********************************************************************** - * @Function: ns7520_eth_reset - * @Return: 0 on failure otherwise 1 - * @Descr: resets the ethernet interface and the PHY, - * performs auto negotiation or fixed modes - ***********************************************************************/ - -static int ns7520_eth_reset(void) -{ - DEBUG_FN(DEBUG_MINOR); - - /* Reset important registers */ - *get_eth_reg_addr(NS7520_ETH_EGCR) = 0; /* Null it out! */ - *get_eth_reg_addr(NS7520_ETH_MAC1) &= NS7520_ETH_MAC1_SRST; - *get_eth_reg_addr(NS7520_ETH_MAC2) = 0; - /* Reset MAC */ - *get_eth_reg_addr(NS7520_ETH_EGCR) |= NS7520_ETH_EGCR_MAC_RES; - udelay(5); - *get_eth_reg_addr(NS7520_ETH_EGCR) &= ~NS7520_ETH_EGCR_MAC_RES; - - /* reset and initialize PHY */ - - *get_eth_reg_addr(NS7520_ETH_MAC1) &= ~NS7520_ETH_MAC1_SRST; - - /* we don't support hot plugging of PHY, therefore we don't reset - phyDetected and nPhyMaxMdioClock here. The risk is if the setting is - incorrect the first open - may detect the PHY correctly but succeding will fail - For reseting the PHY and identifying we have to use the standard - MDIO CLOCK value 2.5 MHz only after hardware reset - After having identified the PHY we will do faster */ - - *get_eth_reg_addr(NS7520_ETH_MCFG) = - ns7520_mii_get_clock_divisor(nPhyMaxMdioClock); - - /* reset PHY */ - ns7520_mii_write(MII_BMCR, BMCR_RESET); - ns7520_mii_write(MII_BMCR, 0); - - udelay(3000); /* [2] p.70 says at least 300us reset recovery time. */ - - /* MII clock has been setup to default, ns7520_mii_identify_phy should - work for all */ - - if (!ns7520_mii_identify_phy()) { - printk(KERN_ERR NS7520_DRIVER_NAME - ": Unsupported PHY, aborting\n"); - return 0; - } - - /* now take the highest MDIO clock possible after detection */ - *get_eth_reg_addr(NS7520_ETH_MCFG) = - ns7520_mii_get_clock_divisor(nPhyMaxMdioClock); - - /* PHY has been detected, so there can be no abort reason and we can - finish initializing ethernet */ - - uiLastLinkStatus = 0xff; /* undefined */ - - ns7520_link_auto_negotiate(); - - if (phyDetected == PHY_LXT971A) - /* set LED2 to link mode */ - ns7520_mii_write(PHY_LXT971_LED_CFG, - (PHY_LXT971_LED_CFG_LINK_ACT << - PHY_LXT971_LED_CFG_SHIFT_LED2) | - (PHY_LXT971_LED_CFG_TRANSMIT << - PHY_LXT971_LED_CFG_SHIFT_LED1)); - - return 1; -} - -/*********************************************************************** - * @Function: ns7520_link_auto_negotiate - * @Return: void - * @Descr: performs auto-negotation of link. - ***********************************************************************/ - -static void ns7520_link_auto_negotiate(void) -{ - unsigned long ulStartJiffies; - unsigned short uiStatus; - - DEBUG_FN(DEBUG_LINK); - - /* run auto-negotation */ - /* define what we are capable of */ - ns7520_mii_write(MII_ADVERTISE, - LPA_100FULL | - LPA_100HALF | - LPA_10FULL | - LPA_10HALF | - PHY_ANLPAR_PSB_802_3); - /* start auto-negotiation */ - ns7520_mii_write(MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART); - - /* wait for completion */ - - ulStartJiffies = get_timer(0); - while (get_timer(0) < ulStartJiffies + NS7520_MII_NEG_DELAY) { - uiStatus = ns7520_mii_read(MII_BMSR); - if ((uiStatus & - (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) == - (BMSR_ANEGCOMPLETE | BMSR_LSTATUS)) { - /* lucky we are, auto-negotiation succeeded */ - ns7520_link_print_changed(); - ns7520_link_update_egcr(); - return; - } - } - - DEBUG_ARGS0(DEBUG_LINK, "auto-negotiation timed out\n"); - /* ignore invalid link settings */ -} - -/*********************************************************************** - * @Function: ns7520_link_update_egcr - * @Return: void - * @Descr: updates the EGCR and MAC2 link status after mode change or - * auto-negotation - ***********************************************************************/ - -static void ns7520_link_update_egcr(void) -{ - unsigned int unEGCR; - unsigned int unMAC2; - unsigned int unIPGT; - - DEBUG_FN(DEBUG_LINK); - - unEGCR = *get_eth_reg_addr(NS7520_ETH_EGCR); - unMAC2 = *get_eth_reg_addr(NS7520_ETH_MAC2); - unIPGT = - *get_eth_reg_addr(NS7520_ETH_IPGT) & ~NS7520_ETH_IPGT_IPGT; - - unEGCR &= ~NS7520_ETH_EGCR_EFULLD; - unMAC2 &= ~NS7520_ETH_MAC2_FULLD; - if ((uiLastLinkStatus & PHY_LXT971_STAT2_DUPLEX_MODE) - == PHY_LXT971_STAT2_DUPLEX_MODE) { - unEGCR |= NS7520_ETH_EGCR_EFULLD; - unMAC2 |= NS7520_ETH_MAC2_FULLD; - unIPGT |= 0x15; /* see [1] p. 167 */ - } else - unIPGT |= 0x12; /* see [1] p. 167 */ - - *get_eth_reg_addr(NS7520_ETH_MAC2) = unMAC2; - *get_eth_reg_addr(NS7520_ETH_EGCR) = unEGCR; - *get_eth_reg_addr(NS7520_ETH_IPGT) = unIPGT; -} - -/*********************************************************************** - * @Function: ns7520_link_print_changed - * @Return: void - * @Descr: checks whether the link status has changed and if so prints - * the new mode - ***********************************************************************/ - -static void ns7520_link_print_changed(void) -{ - unsigned short uiStatus; - unsigned short uiControl; - - DEBUG_FN(DEBUG_LINK); - - uiControl = ns7520_mii_read(MII_BMCR); - - if ((uiControl & BMCR_ANENABLE) == BMCR_ANENABLE) { - /* BMSR_LSTATUS is only set on autonegotiation */ - uiStatus = ns7520_mii_read(MII_BMSR); - - if (!(uiStatus & BMSR_LSTATUS)) { - printk(KERN_WARNING NS7520_DRIVER_NAME - ": link down\n"); - /* @TODO Linux: carrier_off */ - } else { - /* @TODO Linux: carrier_on */ - if (phyDetected == PHY_LXT971A) { - uiStatus = - ns7520_mii_read(PHY_LXT971_STAT2); - uiStatus &= - (PHY_LXT971_STAT2_100BTX | - PHY_LXT971_STAT2_DUPLEX_MODE | - PHY_LXT971_STAT2_AUTO_NEG); - - /* mask out all uninteresting parts */ - } - /* other PHYs must store there link information in - uiStatus as PHY_LXT971 */ - } - } else { - /* mode has been forced, so uiStatus should be the same as the - last link status, enforce printing */ - uiStatus = uiLastLinkStatus; - uiLastLinkStatus = 0xff; - } - - if (uiStatus != uiLastLinkStatus) { - /* save current link status */ - uiLastLinkStatus = uiStatus; - - /* print new link status */ - - printk(KERN_INFO NS7520_DRIVER_NAME - ": link mode %i Mbps %s duplex %s\n", - (uiStatus & PHY_LXT971_STAT2_100BTX) ? 100 : 10, - (uiStatus & PHY_LXT971_STAT2_DUPLEX_MODE) ? "full" : - "half", - (uiStatus & PHY_LXT971_STAT2_AUTO_NEG) ? "(auto)" : - ""); - } -} - -/*********************************************************************** - * the MII low level stuff - ***********************************************************************/ - -/*********************************************************************** - * @Function: ns7520_mii_identify_phy - * @Return: 1 if supported PHY has been detected otherwise 0 - * @Descr: checks for supported PHY and prints the IDs. - ***********************************************************************/ - -static char ns7520_mii_identify_phy(void) -{ - unsigned short uiID1; - unsigned short uiID2; - unsigned char *szName; - char cRes = 0; - - DEBUG_FN(DEBUG_MII); - - phyDetected = (PhyType) uiID1 = ns7520_mii_read(MII_PHYSID1); - - switch (phyDetected) { - case PHY_LXT971A: - szName = "LXT971A"; - uiID2 = ns7520_mii_read(MII_PHYSID2); - nPhyMaxMdioClock = PHY_LXT971_MDIO_MAX_CLK; - cRes = 1; - break; - case PHY_NONE: - default: - /* in case uiID1 == 0 && uiID2 == 0 we may have the wrong - address or reset sets the wrong NS7520_ETH_MCFG_CLKS */ - - uiID2 = 0; - szName = "unknown"; - nPhyMaxMdioClock = PHY_MDIO_MAX_CLK; - phyDetected = PHY_NONE; - } - - printk(KERN_INFO NS7520_DRIVER_NAME - ": PHY (0x%x, 0x%x) = %s detected\n", uiID1, uiID2, szName); - - return cRes; -} - -/*********************************************************************** - * @Function: ns7520_mii_read - * @Return: the data read from PHY register uiRegister - * @Descr: the data read may be invalid if timed out. If so, a message - * is printed but the invalid data is returned. - * The fixed device address is being used. - ***********************************************************************/ - -static unsigned short ns7520_mii_read(unsigned short uiRegister) -{ - DEBUG_FN(DEBUG_MII_LOW); - - /* write MII register to be read */ - *get_eth_reg_addr(NS7520_ETH_MADR) = - CONFIG_PHY_ADDR << 8 | uiRegister; - - *get_eth_reg_addr(NS7520_ETH_MCMD) = NS7520_ETH_MCMD_READ; - - if (!ns7520_mii_poll_busy()) - printk(KERN_WARNING NS7520_DRIVER_NAME - ": MII still busy in read\n"); - /* continue to read */ - - *get_eth_reg_addr(NS7520_ETH_MCMD) = 0; - - return (unsigned short) (*get_eth_reg_addr(NS7520_ETH_MRDD)); -} - -/*********************************************************************** - * @Function: ns7520_mii_write - * @Return: nothing - * @Descr: writes the data to the PHY register. In case of a timeout, - * no special handling is performed but a message printed - * The fixed device address is being used. - ***********************************************************************/ - -static void ns7520_mii_write(unsigned short uiRegister, - unsigned short uiData) -{ - DEBUG_FN(DEBUG_MII_LOW); - - /* write MII register to be written */ - *get_eth_reg_addr(NS7520_ETH_MADR) = - CONFIG_PHY_ADDR << 8 | uiRegister; - - *get_eth_reg_addr(NS7520_ETH_MWTD) = uiData; - - if (!ns7520_mii_poll_busy()) { - printf(KERN_WARNING NS7520_DRIVER_NAME - ": MII still busy in write\n"); - } -} - -/*********************************************************************** - * @Function: ns7520_mii_get_clock_divisor - * @Return: the clock divisor that should be used in NS7520_ETH_MCFG_CLKS - * @Descr: if no clock divisor can be calculated for the - * current SYSCLK and the maximum MDIO Clock, a warning is printed - * and the greatest divisor is taken - ***********************************************************************/ - -static unsigned int ns7520_mii_get_clock_divisor(unsigned int unMaxMDIOClk) -{ - struct { - unsigned int unSysClkDivisor; - unsigned int unClks; /* field for NS7520_ETH_MCFG_CLKS */ - } PHYClockDivisors[] = { - { - 4, NS7520_ETH_MCFG_CLKS_4}, { - 6, NS7520_ETH_MCFG_CLKS_6}, { - 8, NS7520_ETH_MCFG_CLKS_8}, { - 10, NS7520_ETH_MCFG_CLKS_10}, { - 14, NS7520_ETH_MCFG_CLKS_14}, { - 20, NS7520_ETH_MCFG_CLKS_20}, { - 28, NS7520_ETH_MCFG_CLKS_28} - }; - - int nIndexSysClkDiv; - int nArraySize = - sizeof(PHYClockDivisors) / sizeof(PHYClockDivisors[0]); - unsigned int unClks = NS7520_ETH_MCFG_CLKS_28; /* defaults to - greatest div */ - - DEBUG_FN(DEBUG_INIT); - - for (nIndexSysClkDiv = 0; nIndexSysClkDiv < nArraySize; - nIndexSysClkDiv++) { - /* find first sysclock divisor that isn't higher than 2.5 MHz - clock */ - if (NETARM_XTAL_FREQ / - PHYClockDivisors[nIndexSysClkDiv].unSysClkDivisor <= - unMaxMDIOClk) { - unClks = PHYClockDivisors[nIndexSysClkDiv].unClks; - break; - } - } - - DEBUG_ARGS2(DEBUG_INIT, - "Taking MDIO Clock bit mask 0x%0x for max clock %i\n", - unClks, unMaxMDIOClk); - - /* return greatest divisor */ - return unClks; -} - -/*********************************************************************** - * @Function: ns7520_mii_poll_busy - * @Return: 0 if timed out otherwise the remaing timeout - * @Descr: waits until the MII has completed a command or it times out - * code may be interrupted by hard interrupts. - * It is not checked what happens on multiple actions when - * the first is still being busy and we timeout. - ***********************************************************************/ - -static unsigned int ns7520_mii_poll_busy(void) -{ - unsigned int unTimeout = 1000; - - DEBUG_FN(DEBUG_MII_LOW); - - while (((*get_eth_reg_addr(NS7520_ETH_MIND) & NS7520_ETH_MIND_BUSY) - == NS7520_ETH_MIND_BUSY) && unTimeout) - unTimeout--; - - return unTimeout; -} - -/* ---------------------------------------------------------------------------- - * Net+ARM ethernet MII functionality. - */ -#if defined(CONFIG_MII) - -/** - * Maximum MII address we support - */ -#define MII_ADDRESS_MAX (31) - -/** - * Maximum MII register address we support - */ -#define MII_REGISTER_MAX (31) - -/** - * Ethernet MII interface return values for public functions. - */ -enum mii_status { - MII_STATUS_SUCCESS = 0, - MII_STATUS_FAILURE = 1, -}; - -/** - * Read a 16-bit value from an MII register. - */ -extern int ns7520_miiphy_read(const char *devname, unsigned char const addr, - unsigned char const reg, unsigned short *const value) -{ - int ret = MII_STATUS_FAILURE; - - /* Parameter checks */ - if (addr > MII_ADDRESS_MAX) { - ERROR(("invalid addr, 0x%02X", addr)); - goto miiphy_read_failed_0; - } - - if (reg > MII_REGISTER_MAX) { - ERROR(("invalid reg, 0x%02X", reg)); - goto miiphy_read_failed_0; - } - - if (value == NULL) { - ERROR(("NULL value")); - goto miiphy_read_failed_0; - } - - DEBUG_FN(DEBUG_MII_LOW); - - /* write MII register to be read */ - *get_eth_reg_addr(NS7520_ETH_MADR) = (addr << 8) | reg; - - *get_eth_reg_addr(NS7520_ETH_MCMD) = NS7520_ETH_MCMD_READ; - - if (!ns7520_mii_poll_busy()) - printk(KERN_WARNING NS7520_DRIVER_NAME - ": MII still busy in read\n"); - /* continue to read */ - - *get_eth_reg_addr(NS7520_ETH_MCMD) = 0; - - *value = (*get_eth_reg_addr(NS7520_ETH_MRDD)); - ret = MII_STATUS_SUCCESS; - /* Fall through */ - - miiphy_read_failed_0: - return (ret); -} - -/** - * Write a 16-bit value to an MII register. - */ -extern int ns7520_miiphy_write(const char *devname, unsigned char const addr, - unsigned char const reg, unsigned short const value) -{ - int ret = MII_STATUS_FAILURE; - - /* Parameter checks */ - if (addr > MII_ADDRESS_MAX) { - ERROR(("invalid addr, 0x%02X", addr)); - goto miiphy_write_failed_0; - } - - if (reg > MII_REGISTER_MAX) { - ERROR(("invalid reg, 0x%02X", reg)); - goto miiphy_write_failed_0; - } - - /* write MII register to be written */ - *get_eth_reg_addr(NS7520_ETH_MADR) = (addr << 8) | reg; - - *get_eth_reg_addr(NS7520_ETH_MWTD) = value; - - if (!ns7520_mii_poll_busy()) { - printf(KERN_WARNING NS7520_DRIVER_NAME - ": MII still busy in write\n"); - } - - ret = MII_STATUS_SUCCESS; - /* Fall through */ - - miiphy_write_failed_0: - return (ret); -} -#endif /* defined(CONFIG_MII) */ - -int ns7520_miiphy_initialize(bd_t *bis) -{ -#if defined(CONFIG_MII) - miiphy_register("ns7520phy", ns7520_miiphy_read, ns7520_miiphy_write); -#endif - return 0; -} diff --git a/include/ns7520_eth.h b/include/ns7520_eth.h deleted file mode 100644 index b509697..0000000 --- a/include/ns7520_eth.h +++ /dev/null @@ -1,336 +0,0 @@ -/*********************************************************************** - * - * Copyright 2003 by FS Forth-Systeme GmbH. - * All rights reserved. - * - * $Id$ - * @Author: Markus Pietrek - * @Descr: Defines the NS7520 ethernet registers. - * Stick with the old ETH prefix names instead going to the - * new EFE names in the manual. - * NS7520_ETH_* refer to NS7520 Hardware - * Reference/January 2003 [1] - * PHY_LXT971_* refer to Intel LXT971 Datasheet - * #249414 Rev. 02 [2] - * Partly derived from netarm_eth_module.h - * - * Modified by Arthur Shipkowski <art@videon-central.com> from the - * Linux version to be properly formatted for U-Boot (i.e. no C++ comments) - * - ***********************************************************************/ - -#ifndef FS_NS7520_ETH_H -#define FS_NS7520_ETH_H - -#ifdef CONFIG_DRIVER_NS7520_ETHERNET - -#include <miiphy.h> -#include "lxt971a.h" - -/* The port addresses */ - -#define NS7520_ETH_MODULE_BASE (0xFF800000) - -#define get_eth_reg_addr(c) \ - ((volatile unsigned int*) ( NS7520_ETH_MODULE_BASE+(unsigned int) (c))) -#define NS7520_ETH_EGCR (0x0000) /* Ethernet Gen Control */ -#define NS7520_ETH_EGSR (0x0004) /* Ethernet Gen Status */ -#define NS7520_ETH_FIFO (0x0008) /* FIFO Data */ -#define NS7520_ETH_FIFOL (0x000C) /* FIFO Data Last */ -#define NS7520_ETH_ETSR (0x0010) /* Ethernet Transmit Status */ -#define NS7520_ETH_ERSR (0x0014) /* Ethernet Receive Status */ -#define NS7520_ETH_MAC1 (0x0400) /* MAC Config 1 */ -#define NS7520_ETH_MAC2 (0x0404) /* MAC Config 2 */ -#define NS7520_ETH_IPGT (0x0408) /* Back2Back InterPacket Gap */ -#define NS7520_ETH_IPGR (0x040C) /* non back2back InterPacket Gap */ -#define NS7520_ETH_CLRT (0x0410) /* Collision Window/Retry */ -#define NS7520_ETH_MAXF (0x0414) /* Maximum Frame Register */ -#define NS7520_ETH_SUPP (0x0418) /* PHY Support */ -#define NS7520_ETH_TEST (0x041C) /* Test Register */ -#define NS7520_ETH_MCFG (0x0420) /* MII Management Configuration */ -#define NS7520_ETH_MCMD (0x0424) /* MII Management Command */ -#define NS7520_ETH_MADR (0x0428) /* MII Management Address */ -#define NS7520_ETH_MWTD (0x042C) /* MII Management Write Data */ -#define NS7520_ETH_MRDD (0x0430) /* MII Management Read Data */ -#define NS7520_ETH_MIND (0x0434) /* MII Management Indicators */ -#define NS7520_ETH_SMII (0x0438) /* SMII Status Register */ -#define NS7520_ETH_SA1 (0x0440) /* Station Address 1 */ -#define NS7520_ETH_SA2 (0x0444) /* Station Address 2 */ -#define NS7520_ETH_SA3 (0x0448) /* Station Address 3 */ -#define NS7520_ETH_SAFR (0x05C0) /* Station Address Filter */ -#define NS7520_ETH_HT1 (0x05D0) /* Hash Table 1 */ -#define NS7520_ETH_HT2 (0x05D4) /* Hash Table 2 */ -#define NS7520_ETH_HT3 (0x05D8) /* Hash Table 3 */ -#define NS7520_ETH_HT4 (0x05DC) /* Hash Table 4 */ - -/* EGCR Ethernet General Control Register Bit Fields*/ - -#define NS7520_ETH_EGCR_ERX (0x80000000) /* Enable Receive FIFO */ -#define NS7520_ETH_EGCR_ERXDMA (0x40000000) /* Enable Receive DMA */ -#define NS7520_ETH_EGCR_ERXLNG (0x20000000) /* Accept Long packets */ -#define NS7520_ETH_EGCR_ERXSHT (0x10000000) /* Accept Short packets */ -#define NS7520_ETH_EGCR_ERXREG (0x08000000) /* Enable Receive Data Interrupt */ -#define NS7520_ETH_EGCR_ERFIFOH (0x04000000) /* Enable Receive Half-Full Int */ -#define NS7520_ETH_EGCR_ERXBR (0x02000000) /* Enable Receive buffer ready */ -#define NS7520_ETH_EGCR_ERXBAD (0x01000000) /* Accept bad receive packets */ -#define NS7520_ETH_EGCR_ETX (0x00800000) /* Enable Transmit FIFO */ -#define NS7520_ETH_EGCR_ETXDMA (0x00400000) /* Enable Transmit DMA */ -#define NS7520_ETH_EGCR_ETXWM_R (0x00300000) /* Enable Transmit FIFO mark Reserv */ -#define NS7520_ETH_EGCR_ETXWM_75 (0x00200000) /* Enable Transmit FIFO mark 75% */ -#define NS7520_ETH_EGCR_ETXWM_50 (0x00100000) /* Enable Transmit FIFO mark 50% */ -#define NS7520_ETH_EGCR_ETXWM_25 (0x00000000) /* Enable Transmit FIFO mark 25% */ -#define NS7520_ETH_EGCR_ETXREG (0x00080000) /* Enable Transmit Data Read Int */ -#define NS7520_ETH_EGCR_ETFIFOH (0x00040000) /* Enable Transmit Fifo Half Int */ -#define NS7520_ETH_EGCR_ETXBC (0x00020000) /* Enable Transmit Buffer Compl Int */ -#define NS7520_ETH_EGCR_EFULLD (0x00010000) /* Enable Full Duplex Operation */ -#define NS7520_ETH_EGCR_MODE_MA (0x0000C000) /* Mask */ -#define NS7520_ETH_EGCR_MODE_SEE (0x0000C000) /* 10 Mbps SEEQ ENDEC PHY */ -#define NS7520_ETH_EGCR_MODE_LEV (0x00008000) /* 10 Mbps Level1 ENDEC PHY */ -#define NS7520_ETH_EGCR_RES1 (0x00002000) /* Reserved */ -#define NS7520_ETH_EGCR_RXCINV (0x00001000) /* Invert the receive clock input */ -#define NS7520_ETH_EGCR_TXCINV (0x00000800) /* Invert the transmit clock input */ -#define NS7520_ETH_EGCR_PNA (0x00000400) /* pSOS pNA buffer */ -#define NS7520_ETH_EGCR_MAC_RES (0x00000200) /* MAC Software reset */ -#define NS7520_ETH_EGCR_ITXA (0x00000100) /* Insert Transmit Source Address */ -#define NS7520_ETH_EGCR_ENDEC_MA (0x000000FC) /* ENDEC media control bits */ -#define NS7520_ETH_EGCR_EXINT_MA (0x00000003) /* Mask */ -#define NS7520_ETH_EGCR_EXINT_RE (0x00000003) /* Reserved */ -#define NS7520_ETH_EGCR_EXINT_TP (0x00000002) /* TP-PMD Mode */ -#define NS7520_ETH_EGCR_EXINT_10 (0x00000001) /* 10-MBit Mode */ -#define NS7520_ETH_EGCR_EXINT_NO (0x00000000) /* MII normal operation */ - -/* EGSR Ethernet General Status Register Bit Fields*/ - -#define NS7520_ETH_EGSR_RES1 (0xC0000000) /* Reserved */ -#define NS7520_ETH_EGSR_RXFDB_MA (0x30000000) /* Receive FIFO mask */ -#define NS7520_ETH_EGSR_RXFDB_3 (0x30000000) /* Receive FIFO 3 bytes available */ -#define NS7520_ETH_EGSR_RXFDB_2 (0x20000000) /* Receive FIFO 2 bytes available */ -#define NS7520_ETH_EGCR_RXFDB_1 (0x10000000) /* Receive FIFO 1 Bytes available */ -#define NS7520_ETH_EGCR_RXFDB_4 (0x00000000) /* Receive FIFO 4 Bytes available */ -#define NS7520_ETH_EGSR_RXREGR (0x08000000) /* Receive Register Ready */ -#define NS7520_ETH_EGSR_RXFIFOH (0x04000000) /* Receive FIFO Half Full */ -#define NS7520_ETH_EGSR_RXBR (0x02000000) /* Receive Buffer Ready */ -#define NS7520_ETH_EGSR_RXSKIP (0x01000000) /* Receive Buffer Skip */ -#define NS7520_ETH_EGSR_RES2 (0x00F00000) /* Reserved */ -#define NS7520_ETH_EGSR_TXREGE (0x00080000) /* Transmit Register Empty */ -#define NS7520_ETH_EGSR_TXFIFOH (0x00040000) /* Transmit FIFO half empty */ -#define NS7520_ETH_EGSR_TXBC (0x00020000) /* Transmit buffer complete */ -#define NS7520_ETH_EGSR_TXFIFOE (0x00010000) /* Transmit FIFO empty */ -#define NS7520_ETH_EGSR_RXPINS (0x0000FC00) /* ENDEC Phy Status */ -#define NS7520_ETH_EGSR_RES3 (0x000003FF) /* Reserved */ - -/* ETSR Ethernet Transmit Status Register Bit Fields*/ - -#define NS7520_ETH_ETSR_RES1 (0xFFFF0000) /* Reserved */ -#define NS7520_ETH_ETSR_TXOK (0x00008000) /* Packet transmitted OK */ -#define NS7520_ETH_ETSR_TXBR (0x00004000) /* Broadcast packet transmitted */ -#define NS7520_ETH_ETSR_TXMC (0x00002000) /* Multicast packet transmitted */ -#define NS7520_ETH_ETSR_TXAL (0x00001000) /* Transmit abort - late collision */ -#define NS7520_ETH_ETSR_TXAED (0x00000800) /* Transmit abort - deferral */ -#define NS7520_ETH_ETSR_TXAEC (0x00000400) /* Transmit abort - exc collisions */ -#define NS7520_ETH_ETSR_TXAUR (0x00000200) /* Transmit abort - underrun */ -#define NS7520_ETH_ETSR_TXAJ (0x00000100) /* Transmit abort - jumbo */ -#define NS7520_ETH_ETSR_RES2 (0x00000080) /* Reserved */ -#define NS7520_ETH_ETSR_TXDEF (0x00000040) /* Transmit Packet Deferred */ -#define NS7520_ETH_ETSR_TXCRC (0x00000020) /* Transmit CRC error */ -#define NS7520_ETH_ETSR_RES3 (0x00000010) /* Reserved */ -#define NS7520_ETH_ETSR_TXCOLC (0x0000000F) /* Transmit Collision Count */ - -/* ERSR Ethernet Receive Status Register Bit Fields*/ - -#define NS7520_ETH_ERSR_RXSIZE (0xFFFF0000) /* Receive Buffer Size */ -#define NS7520_ETH_ERSR_RXCE (0x00008000) /* Receive Carrier Event */ -#define NS7520_ETH_ERSR_RXDV (0x00004000) /* Receive Data Violation Event */ -#define NS7520_ETH_ERSR_RXOK (0x00002000) /* Receive Packet OK */ -#define NS7520_ETH_ERSR_RXBR (0x00001000) /* Receive Broadcast Packet */ -#define NS7520_ETH_ERSR_RXMC (0x00000800) /* Receive Multicast Packet */ -#define NS7520_ETH_ERSR_RXCRC (0x00000400) /* Receive Packet has CRC error */ -#define NS7520_ETH_ERSR_RXDR (0x00000200) /* Receive Packet has dribble error */ -#define NS7520_ETH_ERSR_RXCV (0x00000100) /* Receive Packet code violation */ -#define NS7520_ETH_ERSR_RXLNG (0x00000080) /* Receive Packet too long */ -#define NS7520_ETH_ERSR_RXSHT (0x00000040) /* Receive Packet too short */ -#define NS7520_ETH_ERSR_ROVER (0x00000020) /* Recive overflow */ -#define NS7520_ETH_ERSR_RES (0x0000001F) /* Reserved */ - -/* MAC1 MAC Configuration Register 1 Bit Fields*/ - -#define NS7520_ETH_MAC1_RES1 (0xFFFF0000) /* Reserved */ -#define NS7520_ETH_MAC1_SRST (0x00008000) /* Soft Reset */ -#define NS7520_ETH_MAC1_SIMMRST (0x00004000) /* Simulation Reset */ -#define NS7520_ETH_MAC1_RES2 (0x00003000) /* Reserved */ -#define NS7520_ETH_MAC1_RPEMCSR (0x00000800) /* Reset PEMCS/RX */ -#define NS7520_ETH_MAC1_RPERFUN (0x00000400) /* Reset PERFUN */ -#define NS7520_ETH_MAC1_RPEMCST (0x00000200) /* Reset PEMCS/TX */ -#define NS7520_ETH_MAC1_RPETFUN (0x00000100) /* Reset PETFUN */ -#define NS7520_ETH_MAC1_RES3 (0x000000E0) /* Reserved */ -#define NS7520_ETH_MAC1_LOOPBK (0x00000010) /* Internal Loopback */ -#define NS7520_ETH_MAC1_TXFLOW (0x00000008) /* TX flow control */ -#define NS7520_ETH_MAC1_RXFLOW (0x00000004) /* RX flow control */ -#define NS7520_ETH_MAC1_PALLRX (0x00000002) /* Pass ALL receive frames */ -#define NS7520_ETH_MAC1_RXEN (0x00000001) /* Receive enable */ - -/* MAC Configuration Register 2 Bit Fields*/ - -#define NS7520_ETH_MAC2_RES1 (0xFFFF8000) /* Reserved */ -#define NS7520_ETH_MAC2_EDEFER (0x00004000) /* Excess Deferral */ -#define NS7520_ETH_MAC2_BACKP (0x00002000) /* Backpressure/NO back off */ -#define NS7520_ETH_MAC2_NOBO (0x00001000) /* No back off */ -#define NS7520_ETH_MAC2_RES2 (0x00000C00) /* Reserved */ -#define NS7520_ETH_MAC2_LONGP (0x00000200) /* Long Preable enforcement */ -#define NS7520_ETH_MAC2_PUREP (0x00000100) /* Pure preamble enforcement */ -#define NS7520_ETH_MAC2_AUTOP (0x00000080) /* Auto detect PAD enable */ -#define NS7520_ETH_MAC2_VLANP (0x00000040) /* VLAN pad enable */ -#define NS7520_ETH_MAC2_PADEN (0x00000020) /* PAD/CRC enable */ -#define NS7520_ETH_MAC2_CRCEN (0x00000010) /* CRC enable */ -#define NS7520_ETH_MAC2_DELCRC (0x00000008) /* Delayed CRC */ -#define NS7520_ETH_MAC2_HUGE (0x00000004) /* Huge frame enable */ -#define NS7520_ETH_MAC2_FLENC (0x00000002) /* Frame length checking */ -#define NS7520_ETH_MAC2_FULLD (0x00000001) /* Full duplex */ - -/* IPGT Back-to-Back Inter-Packet-Gap Register Bit Fields*/ - -#define NS7520_ETH_IPGT_RES (0xFFFFFF80) /* Reserved */ -#define NS7520_ETH_IPGT_IPGT (0x0000007F) /* Back-to-Back Interpacket Gap */ - -/* IPGR Non Back-to-Back Inter-Packet-Gap Register Bit Fields*/ - -#define NS7520_ETH_IPGR_RES1 (0xFFFF8000) /* Reserved */ -#define NS7520_ETH_IPGR_IPGR1 (0x00007F00) /* Non Back-to-back Interpacket Gap */ -#define NS7520_ETH_IPGR_RES2 (0x00000080) /* Reserved */ -#define NS7520_ETH_IPGR_IPGR2 (0x0000007F) /* Non back-to-back Interpacket Gap */ - -/* CLRT Collision Windows/Collision Retry Register Bit Fields*/ - -#define NS7520_ETH_CLRT_RES1 (0xFFFFC000) /* Reserved */ -#define NS7520_ETH_CLRT_CWIN (0x00003F00) /* Collision Windows */ -#define NS7520_ETH_CLRT_RES2 (0x000000F0) /* Reserved */ -#define NS7520_ETH_CLRT_RETX (0x0000000F) /* Retransmission maximum */ - -/* MAXF Maximum Frame Register Bit Fields*/ - -#define NS7520_ETH_MAXF_RES1 (0xFFFF0000) /* Reserved */ -#define NS7520_ETH_MAXF_MAXF (0x0000FFFF) /* Maximum frame length */ - -/* SUPP PHY Support Register Bit Fields*/ - -#define NS7520_ETH_SUPP_RES1 (0xFFFFFF00) /* Reserved */ -#define NS7520_ETH_SUPP_RPE100X (0x00000080) /* Reset PE100X module */ -#define NS7520_ETH_SUPP_FORCEQ (0x00000040) /* Force Quit */ -#define NS7520_ETH_SUPP_NOCIPH (0x00000020) /* No Cipher */ -#define NS7520_ETH_SUPP_DLINKF (0x00000010) /* Disable link fail */ -#define NS7520_ETH_SUPP_RPE10T (0x00000008) /* Reset PE10T module */ -#define NS7520_ETH_SUPP_RES2 (0x00000004) /* Reserved */ -#define NS7520_ETH_SUPP_JABBER (0x00000002) /* Enable Jabber protection */ -#define NS7520_ETH_SUPP_BITMODE (0x00000001) /* Bit Mode */ - -/* TEST Register Bit Fields*/ - -#define NS7520_ETH_TEST_RES1 (0xFFFFFFF8) /* Reserved */ -#define NS7520_ETH_TEST_TBACK (0x00000004) /* Test backpressure */ -#define NS7520_ETH_TEST_TPAUSE (0x00000002) /* Test Pause */ -#define NS7520_ETH_TEST_SPQ (0x00000001) /* Shortcut pause quanta */ - -/* MCFG MII Management Configuration Register Bit Fields*/ - -#define NS7520_ETH_MCFG_RES1 (0xFFFF0000) /* Reserved */ -#define NS7520_ETH_MCFG_RMIIM (0x00008000) /* Reset MII management */ -#define NS7520_ETH_MCFG_RES2 (0x00007FE0) /* Reserved */ -#define NS7520_ETH_MCFG_CLKS_MA (0x0000001C) /* Clock Select */ -#define NS7520_ETH_MCFG_CLKS_4 (0x00000004) /* Sysclk / 4 */ -#define NS7520_ETH_MCFG_CLKS_6 (0x00000008) /* Sysclk / 6 */ -#define NS7520_ETH_MCFG_CLKS_8 (0x0000000C) /* Sysclk / 8 */ -#define NS7520_ETH_MCFG_CLKS_10 (0x00000010) /* Sysclk / 10 */ -#define NS7520_ETH_MCFG_CLKS_14 (0x00000014) /* Sysclk / 14 */ -#define NS7520_ETH_MCFG_CLKS_20 (0x00000018) /* Sysclk / 20 */ -#define NS7520_ETH_MCFG_CLKS_28 (0x0000001C) /* Sysclk / 28 */ -#define NS7520_ETH_MCFG_SPRE (0x00000002) /* Suppress preamble */ -#define NS7520_ETH_MCFG_SCANI (0x00000001) /* Scan increment */ - -/* MCMD MII Management Command Register Bit Fields*/ - -#define NS7520_ETH_MCMD_RES1 (0xFFFFFFFC) /* Reserved */ -#define NS7520_ETH_MCMD_SCAN (0x00000002) /* Automatically Scan for Read Data */ -#define NS7520_ETH_MCMD_READ (0x00000001) /* Single scan for Read Data */ - -/* MCMD MII Management Address Register Bit Fields*/ - -#define NS7520_ETH_MADR_RES1 (0xFFFFE000) /* Reserved */ -#define NS7520_ETH_MADR_DADR (0x00001F00) /* MII PHY device address */ -#define NS7520_ETH_MADR_RES2 (0x000000E0) /* Reserved */ -#define NS7520_ETH_MADR_RADR (0x0000001F) /* MII PHY register address */ - -/* MWTD MII Management Write Data Register Bit Fields*/ - -#define NS7520_ETH_MWTD_RES1 (0xFFFF0000) /* Reserved */ -#define NS7520_ETH_MWTD_MWTD (0x0000FFFF) /* MII Write Data */ - -/* MRRD MII Management Read Data Register Bit Fields*/ - -#define NS7520_ETH_MRRD_RES1 (0xFFFF0000) /* Reserved */ -#define NS7520_ETH_MRRD_MRDD (0x0000FFFF) /* MII Read Data */ - -/* MIND MII Management Indicators Register Bit Fields*/ - -#define NS7520_ETH_MIND_RES1 (0xFFFFFFF8) /* Reserved */ -#define NS7520_ETH_MIND_NVALID (0x00000004) /* Read Data not valid */ -#define NS7520_ETH_MIND_SCAN (0x00000002) /* Automatically scan for read data */ -#define NS7520_ETH_MIND_BUSY (0x00000001) /* MII interface busy */ - -/* SMII Status Register Bit Fields*/ - -#define NS7520_ETH_SMII_RES1 (0xFFFFFFE0) /* Reserved */ -#define NS7520_ETH_SMII_CLASH (0x00000010) /* MAC-to-MAC with PHY */ -#define NS7520_ETH_SMII_JABBER (0x00000008) /* Jabber condition present */ -#define NS7520_ETH_SMII_LINK (0x00000004) /* Link OK */ -#define NS7520_ETH_SMII_DUPLEX (0x00000002) /* Full-duplex operation */ -#define NS7520_ETH_SMII_SPEED (0x00000001) /* 100 Mbps */ - -/* SA1 Station Address 1 Register Bit Fields*/ - -#define NS7520_ETH_SA1_RES1 (0xFFFF0000) /* Reserved */ -#define NS7520_ETH_SA1_OCTET1 (0x0000FF00) /* Station Address octet 1 */ -#define NS7520_ETH_SA1_OCTET2 (0x000000FF) /* Station Address octet 2 */ - -/* SA2 Station Address 2 Register Bit Fields*/ - -#define NS7520_ETH_SA2_RES1 (0xFFFF0000) /* Reserved */ -#define NS7520_ETH_SA2_OCTET3 (0x0000FF00) /* Station Address octet 3 */ -#define NS7520_ETH_SA2_OCTET4 (0x000000FF) /* Station Address octet 4 */ - -/* SA3 Station Address 3 Register Bit Fields*/ - -#define NS7520_ETH_SA3_RES1 (0xFFFF0000) /* Reserved */ -#define NS7520_ETH_SA3_OCTET5 (0x0000FF00) /* Station Address octet 5 */ -#define NS7520_ETH_SA3_OCTET6 (0x000000FF) /* Station Address octet 6 */ - -/* SAFR Station Address Filter Register Bit Fields*/ - -#define NS7520_ETH_SAFR_RES1 (0xFFFFFFF0) /* Reserved */ -#define NS7520_ETH_SAFR_PRO (0x00000008) /* Enable Promiscuous mode */ -#define NS7520_ETH_SAFR_PRM (0x00000004) /* Accept ALL multicast packets */ -#define NS7520_ETH_SAFR_PRA (0x00000002) /* Accept multicast packets table */ -#define NS7520_ETH_SAFR_BROAD (0x00000001) /* Accept ALL Broadcast packets */ - -/* HT1 Hash Table 1 Register Bit Fields*/ - -#define NS7520_ETH_HT1_RES1 (0xFFFF0000) /* Reserved */ -#define NS7520_ETH_HT1_HT1 (0x0000FFFF) /* CRC value 15-0 */ - -/* HT2 Hash Table 2 Register Bit Fields*/ - -#define NS7520_ETH_HT2_RES1 (0xFFFF0000) /* Reserved */ -#define NS7520_ETH_HT2_HT2 (0x0000FFFF) /* CRC value 31-16 */ - -/* HT3 Hash Table 3 Register Bit Fields*/ - -#define NS7520_ETH_HT3_RES1 (0xFFFF0000) /* Reserved */ -#define NS7520_ETH_HT3_HT3 (0x0000FFFF) /* CRC value 47-32 */ - -/* HT4 Hash Table 4 Register Bit Fields*/ - -#define NS7520_ETH_HT4_RES1 (0xFFFF0000) /* Reserved */ -#define NS7520_ETH_HT4_HT4 (0x0000FFFF) /* CRC value 63-48 */ - -#endif /* CONFIG_DRIVER_NS7520_ETHERNET */ - -#endif /* FS_NS7520_ETH_H */ @@ -541,7 +541,6 @@ char *eth_get_name (void) #warning Ethernet driver is deprecated. Please update to use CONFIG_NET_MULTI extern int mcf52x2_miiphy_initialize(bd_t *bis); -extern int ns7520_miiphy_initialize(bd_t *bis); int eth_initialize(bd_t *bis) @@ -553,9 +552,6 @@ int eth_initialize(bd_t *bis) #if defined(CONFIG_MCF52x2) mcf52x2_miiphy_initialize(bis); #endif -#if defined(CONFIG_DRIVER_NS7520_ETHERNET) - ns7520_miiphy_initialize(bis); -#endif return 0; } #endif |