diff options
441 files changed, 2675 insertions, 1311 deletions
@@ -91,7 +91,7 @@ config SYS_EXTRA_OPTIONS depends on !SPL_BUILD help The old configuration infrastructure (= mkconfig + boards.cfg) - provided the extra options field. It you have something like + provided the extra options field. If you have something like "HAS_BAR,BAZ=64", the optional options #define CONFIG_HAS #define CONFIG_BAZ 64 @@ -103,3 +103,15 @@ config SYS_EXTRA_OPTIONS endmenu # Boot images source "arch/Kconfig" + +source "common/Kconfig" + +source "dts/Kconfig" + +source "net/Kconfig" + +source "drivers/Kconfig" + +source "fs/Kconfig" + +source "lib/Kconfig" @@ -613,11 +613,9 @@ libs-y += fs/ libs-y += net/ libs-y += disk/ libs-y += drivers/ -libs-$(CONFIG_DM) += drivers/core/ libs-y += drivers/dma/ libs-y += drivers/gpio/ libs-y += drivers/i2c/ -libs-y += drivers/input/ libs-y += drivers/mmc/ libs-y += drivers/mtd/ libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/ @@ -649,7 +647,6 @@ libs-$(CONFIG_API) += api/ libs-$(CONFIG_HAS_POST) += post/ libs-y += test/ libs-y += test/dm/ -libs-$(CONFIG_DM_DEMO) += drivers/demo/ ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610)) libs-y += arch/$(ARCH)/imx-common/ @@ -1635,6 +1635,16 @@ The following options need to be configured: downloads. This buffer should be as large as possible for a platform. Define this to the size available RAM for fastboot. + CONFIG_FASTBOOT_FLASH + The fastboot protocol includes a "flash" command for writing + the downloaded image to a non-volatile storage device. Define + this to enable the "fastboot flash" command. + + CONFIG_FASTBOOT_FLASH_MMC_DEV + The fastboot "flash" command requires additional information + regarding the non-volatile storage device. Define this to + the eMMC device that fastboot should use to store the image. + - Journaling Flash filesystem support: CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, CONFIG_JFFS2_NAND_DEV diff --git a/arch/Kconfig b/arch/Kconfig index c9ccb7d..bf26764 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -7,6 +7,7 @@ config ARC config ARM bool "ARM architecture" + select SUPPORT_OF_CONTROL config AVR32 bool "AVR32 architecture" @@ -19,6 +20,7 @@ config M68K config MICROBLAZE bool "MicroBlaze architecture" + select SUPPORT_OF_CONTROL config MIPS bool "MIPS architecture" @@ -37,6 +39,7 @@ config PPC config SANDBOX bool "Sandbox" + select SUPPORT_OF_CONTROL config SH bool "SuperH architecture" @@ -46,6 +49,7 @@ config SPARC config X86 bool "x86 architecture" + select SUPPORT_OF_CONTROL endchoice diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 106aed9..3efede2 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -462,6 +462,7 @@ config ZYNQ config TEGRA bool "NVIDIA Tegra" select SPL + select OF_CONTROL if !SPL_BUILD config TARGET_VEXPRESS_AEMV8A bool "Support vexpress_aemv8a" diff --git a/arch/arm/cpu/arm1176/tnetv107x/clock.c b/arch/arm/cpu/arm1176/tnetv107x/clock.c index 3708b6f..47c23bb 100644 --- a/arch/arm/cpu/arm1176/tnetv107x/clock.c +++ b/arch/arm/cpu/arm1176/tnetv107x/clock.c @@ -362,7 +362,7 @@ static void init_pll(const struct pll_init_data *data) pllctl_reg_write(data->pll, ctl, tmp); mult = data->pll_freq / fpll; - for (mult = MAX(mult, 1); mult <= MAX_MULT; mult++) { + for (mult = max(mult, 1); mult <= MAX_MULT; mult++) { div = (fpll * mult) / data->pll_freq; if (div < 1 || div > MAX_DIV) continue; diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index d132f03..e7c93d8 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -23,18 +23,23 @@ config TARGET_ODROID config TARGET_ARNDALE bool "Exynos5250 Arndale board" + select OF_CONTROL if !SPL_BUILD config TARGET_SMDK5250 bool "SMDK5250 board" + select OF_CONTROL if !SPL_BUILD config TARGET_SNOW bool "Snow board" + select OF_CONTROL if !SPL_BUILD config TARGET_SMDK5420 bool "SMDK5420 board" + select OF_CONTROL if !SPL_BUILD config TARGET_PEACH_PIT bool "Peach Pi board" + select OF_CONTROL if !SPL_BUILD endchoice diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c index 7b5c1e4..7a9b03a 100644 --- a/arch/arm/cpu/armv7/mx6/ddr.c +++ b/arch/arm/cpu/armv7/mx6/ddr.c @@ -247,47 +247,47 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo, switch (ddr3_cfg->mem_speed) { case 800: - txp = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1; + txp = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1; + tcke = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1; if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(40000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1; } else { tfaw = DIV_ROUND_UP(50000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1; } break; case 1066: - txp = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3 * clkper, 5625), clkper) - 1; + txp = DIV_ROUND_UP(max(3 * clkper, 7500), clkper) - 1; + tcke = DIV_ROUND_UP(max(3 * clkper, 5625), clkper) - 1; if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(37500, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1; } else { tfaw = DIV_ROUND_UP(50000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 10000), clkper) - 1; } break; case 1333: - txp = DIV_ROUND_UP(MAX(3 * clkper, 6000), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3 * clkper, 5625), clkper) - 1; + txp = DIV_ROUND_UP(max(3 * clkper, 6000), clkper) - 1; + tcke = DIV_ROUND_UP(max(3 * clkper, 5625), clkper) - 1; if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(30000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 6000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 6000), clkper) - 1; } else { tfaw = DIV_ROUND_UP(45000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1; } break; case 1600: - txp = DIV_ROUND_UP(MAX(3 * clkper, 6000), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3 * clkper, 5000), clkper) - 1; + txp = DIV_ROUND_UP(max(3 * clkper, 6000), clkper) - 1; + tcke = DIV_ROUND_UP(max(3 * clkper, 5000), clkper) - 1; if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(30000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 6000), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 6000), clkper) - 1; } else { tfaw = DIV_ROUND_UP(40000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1; + trrd = DIV_ROUND_UP(max(4 * clkper, 7500), clkper) - 1; } break; default: @@ -295,18 +295,18 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo, hang(); break; } - txpdll = DIV_ROUND_UP(MAX(10 * clkper, 24000), clkper) - 1; - tcksre = DIV_ROUND_UP(MAX(5 * clkper, 10000), clkper); + txpdll = DIV_ROUND_UP(max(10 * clkper, 24000), clkper) - 1; + tcksre = DIV_ROUND_UP(max(5 * clkper, 10000), clkper); taonpd = DIV_ROUND_UP(2000, clkper) - 1; tcksrx = tcksre; taofpd = taonpd; twr = DIV_ROUND_UP(15000, clkper) - 1; - tmrd = DIV_ROUND_UP(MAX(12 * clkper, 15000), clkper) - 1; + tmrd = DIV_ROUND_UP(max(12 * clkper, 15000), clkper) - 1; trc = DIV_ROUND_UP(ddr3_cfg->trcmin, clkper / 10) - 1; tras = DIV_ROUND_UP(ddr3_cfg->trasmin, clkper / 10) - 1; tcl = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 3; trp = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 1; - twtr = ROUND(MAX(4 * clkper, 7500) / clkper, 1) - 1; + twtr = ROUND(max(4 * clkper, 7500) / clkper, 1) - 1; trcd = trp; trtp = twtr; cs0_end = 4 * sysinfo->cs_density - 1; diff --git a/arch/arm/include/asm/arch-kirkwood/spi.h b/arch/arm/include/asm/arch-kirkwood/spi.h index b1cf614..e512dce 100644 --- a/arch/arm/include/asm/arch-kirkwood/spi.h +++ b/arch/arm/include/asm/arch-kirkwood/spi.h @@ -43,10 +43,10 @@ struct kwspi_registers { #define KWSPI_XFERLEN_2BYTE (1 << 5) #define KWSPI_XFERLEN_MASK (1 << 5) #define KWSPI_ADRLEN_1BYTE 0 -#define KWSPI_ADRLEN_2BYTE 1 << 8 -#define KWSPI_ADRLEN_3BYTE 2 << 8 -#define KWSPI_ADRLEN_4BYTE 3 << 8 -#define KWSPI_ADRLEN_MASK 3 << 8 +#define KWSPI_ADRLEN_2BYTE (1 << 8) +#define KWSPI_ADRLEN_3BYTE (2 << 8) +#define KWSPI_ADRLEN_4BYTE (3 << 8) +#define KWSPI_ADRLEN_MASK (3 << 8) #define KWSPI_TIMEOUT 10000 #endif /* __KW_SPI_H__ */ diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk index 6329b6c..fec02f2 100644 --- a/arch/powerpc/config.mk +++ b/arch/powerpc/config.mk @@ -11,6 +11,7 @@ endif CONFIG_STANDALONE_LOAD_ADDR ?= 0x40000 LDFLAGS_FINAL += --gc-sections +LDFLAGS_FINAL += --bss-plt PLATFORM_RELFLAGS += -fpic -mrelocatable -ffunction-sections -fdata-sections \ -meabi PLATFORM_CPPFLAGS += -D__powerpc__ -ffixed-r2 diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c index d1fc76a..8edf5bb 100644 --- a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c @@ -186,11 +186,6 @@ u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift) #endif cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask; - /* Is serdes enabled at all? */ - if (!cfg) { - printf("SERDES%d is not enabled\n", sd + 1); - return 0; - } /* Erratum A-007186 * Freescale Scratch Pad Fuse Register n (SFP_FSPFR0) diff --git a/board/ip860/u-boot.lds b/arch/powerpc/cpu/mpc8xx/u-boot.lds index 0eb2fba..0eb2fba 100644 --- a/board/ip860/u-boot.lds +++ b/arch/powerpc/cpu/mpc8xx/u-boot.lds diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c index 9273745..4cec5e1 100644 --- a/arch/powerpc/cpu/mpc8xxx/fdt.c +++ b/arch/powerpc/cpu/mpc8xxx/fdt.c @@ -1,5 +1,5 @@ /* - * Copyright 2009-2012 Freescale Semiconductor, Inc. + * Copyright 2009-2014 Freescale Semiconductor, Inc. * * This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and * arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains @@ -123,14 +123,14 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) { const char *modes[] = { "host", "peripheral", "otg" }; const char *phys[] = { "ulpi", "utmi" }; - const char *dr_mode_type = NULL; - const char *dr_phy_type = NULL; int usb_mode_off = -1; int usb_phy_off = -1; char str[5]; int i, j; for (i = 1; i <= CONFIG_USB_MAX_CONTROLLER_COUNT; i++) { + const char *dr_mode_type = NULL; + const char *dr_phy_type = NULL; int mode_idx = -1, phy_idx = -1; snprintf(str, 5, "%s%d", "usb", i); if (hwconfig(str)) { @@ -150,18 +150,16 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) } } - if (mode_idx < 0 || phy_idx < 0) { - puts("ERROR: wrong usb mode/phy defined!!\n"); - return; - } - - dr_mode_type = modes[mode_idx]; - dr_phy_type = phys[phy_idx]; - if (mode_idx < 0 && phy_idx < 0) { printf("WARNING: invalid phy or mode\n"); return; } + + if (mode_idx > -1) + dr_mode_type = modes[mode_idx]; + + if (phy_idx > -1) + dr_phy_type = phys[phy_idx]; } usb_mode_off = fdt_fixup_usb_mode_phy_type(blob, diff --git a/arch/x86/lib/physmem.c b/arch/x86/lib/physmem.c index 59b3fe9..b57b2c3 100644 --- a/arch/x86/lib/physmem.c +++ b/arch/x86/lib/physmem.c @@ -189,7 +189,7 @@ phys_addr_t arch_phys_memset(phys_addr_t start, int c, phys_size_t size) /* Handle memory below 4GB. */ if (start <= max_addr) { - phys_size_t low_size = MIN(max_addr + 1 - start, size); + phys_size_t low_size = min(max_addr + 1 - start, size); void *start_ptr = (void *)(uintptr_t)start; assert(((phys_addr_t)(uintptr_t)start) == start); @@ -208,7 +208,7 @@ phys_addr_t arch_phys_memset(phys_addr_t start, int c, phys_size_t size) /* Handle the first partial page. */ if (offset) { phys_addr_t end = - MIN(map_addr + LARGE_PAGE_SIZE, start + size); + min(map_addr + LARGE_PAGE_SIZE, start + size); phys_size_t cur_size = end - start; x86_phys_memset_page(map_addr, offset, c, cur_size); size -= cur_size; diff --git a/board/LaCie/net2big_v2/MAINTAINERS b/board/LaCie/net2big_v2/MAINTAINERS index 1afaa5c..205c75e 100644 --- a/board/LaCie/net2big_v2/MAINTAINERS +++ b/board/LaCie/net2big_v2/MAINTAINERS @@ -1,5 +1,5 @@ NET2BIG_V2 BOARD -M: - +#M: - S: Maintained F: board/LaCie/net2big_v2/ F: include/configs/lacie_kw.h diff --git a/board/LaCie/netspace_v2/MAINTAINERS b/board/LaCie/netspace_v2/MAINTAINERS index ad3dfa1..55fd50d 100644 --- a/board/LaCie/netspace_v2/MAINTAINERS +++ b/board/LaCie/netspace_v2/MAINTAINERS @@ -8,7 +8,7 @@ F: configs/netspace_max_v2_defconfig F: configs/netspace_v2_defconfig NETSPACE_LITE_V2 BOARD -M: - +#M: - S: Maintained F: configs/netspace_lite_v2_defconfig F: configs/netspace_mini_v2_defconfig diff --git a/board/LaCie/wireless_space/MAINTAINERS b/board/LaCie/wireless_space/MAINTAINERS index 8b36bff..8a27b9a 100644 --- a/board/LaCie/wireless_space/MAINTAINERS +++ b/board/LaCie/wireless_space/MAINTAINERS @@ -1,5 +1,5 @@ WIRELESS_SPACE BOARD -M: - +#M: - S: Maintained F: board/LaCie/wireless_space/ F: include/configs/wireless_space.h diff --git a/board/Marvell/db64360/MAINTAINERS b/board/Marvell/db64360/MAINTAINERS index 7383207..af3eb24 100644 --- a/board/Marvell/db64360/MAINTAINERS +++ b/board/Marvell/db64360/MAINTAINERS @@ -1,5 +1,5 @@ DB64360 BOARD -M: - +#M: - S: Maintained F: board/Marvell/db64360/ F: include/configs/DB64360.h diff --git a/board/Marvell/db64460/MAINTAINERS b/board/Marvell/db64460/MAINTAINERS index 751aac2..a30c51c 100644 --- a/board/Marvell/db64460/MAINTAINERS +++ b/board/Marvell/db64460/MAINTAINERS @@ -1,5 +1,5 @@ DB64460 BOARD -M: - +#M: - S: Maintained F: board/Marvell/db64460/ F: include/configs/DB64460.h diff --git a/board/Marvell/openrd/MAINTAINERS b/board/Marvell/openrd/MAINTAINERS index 7a52a8e..7a189ab 100644 --- a/board/Marvell/openrd/MAINTAINERS +++ b/board/Marvell/openrd/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/openrd.h F: configs/openrd_base_defconfig OPENRD_CLIENT BOARD -M: - +#M: - S: Maintained F: configs/openrd_client_defconfig F: configs/openrd_ultimate_defconfig diff --git a/board/a3000/MAINTAINERS b/board/a3000/MAINTAINERS index 2d8560f..303e5fd 100644 --- a/board/a3000/MAINTAINERS +++ b/board/a3000/MAINTAINERS @@ -1,5 +1,5 @@ A3000 BOARD -M: - +#M: - S: Maintained F: board/a3000/ F: include/configs/A3000.h diff --git a/board/amcc/bluestone/MAINTAINERS b/board/amcc/bluestone/MAINTAINERS index 4a329e9..9eb9bbd 100644 --- a/board/amcc/bluestone/MAINTAINERS +++ b/board/amcc/bluestone/MAINTAINERS @@ -1,5 +1,5 @@ BLUESTONE BOARD -M: Tirumala Marri <tmarri@apm.com> +#M: Tirumala Marri <tmarri@apm.com> S: Orphan (since 2014-03) F: board/amcc/bluestone/ F: include/configs/bluestone.h diff --git a/board/amcc/bubinga/MAINTAINERS b/board/amcc/bubinga/MAINTAINERS index 9d5ace2..3299cc3 100644 --- a/board/amcc/bubinga/MAINTAINERS +++ b/board/amcc/bubinga/MAINTAINERS @@ -1,5 +1,5 @@ BUBINGA BOARD -M: - +#M: - S: Maintained F: board/amcc/bubinga/ F: include/configs/bubinga.h diff --git a/board/amcc/yucca/MAINTAINERS b/board/amcc/yucca/MAINTAINERS index 0663003..1cbdb0e 100644 --- a/board/amcc/yucca/MAINTAINERS +++ b/board/amcc/yucca/MAINTAINERS @@ -1,5 +1,5 @@ YUCCA BOARD -M: - +#M: - S: Maintained F: board/amcc/yucca/ F: include/configs/yucca.h diff --git a/board/armltd/versatile/MAINTAINERS b/board/armltd/versatile/MAINTAINERS index f390e53..a56dd99 100644 --- a/board/armltd/versatile/MAINTAINERS +++ b/board/armltd/versatile/MAINTAINERS @@ -1,5 +1,5 @@ VERSATILE BOARD -M: - +#M: - S: Maintained F: board/armltd/versatile/ F: include/configs/versatile.h diff --git a/board/armltd/vexpress/MAINTAINERS b/board/armltd/vexpress/MAINTAINERS index e730f4f..a6943d7 100644 --- a/board/armltd/vexpress/MAINTAINERS +++ b/board/armltd/vexpress/MAINTAINERS @@ -1,12 +1,12 @@ VEXPRESS BOARD -M: - +#M: - S: Maintained F: board/armltd/vexpress/ F: include/configs/vexpress_ca15_tc2.h F: configs/vexpress_ca15_tc2_defconfig VEXPRESS_CA5X2 BOARD -M: Matt Waddel <matt.waddel@linaro.org> +#M: Matt Waddel <matt.waddel@linaro.org> S: Orphan (since 2014-08) F: include/configs/vexpress_ca5x2.h F: configs/vexpress_ca5x2_defconfig diff --git a/board/atmel/atngw100/MAINTAINERS b/board/atmel/atngw100/MAINTAINERS index dd698ea..1c319f6 100644 --- a/board/atmel/atngw100/MAINTAINERS +++ b/board/atmel/atngw100/MAINTAINERS @@ -1,5 +1,5 @@ ATNGW100 BOARD -M: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +#M: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> S: Orphan (since 2014-06) F: board/atmel/atngw100/ F: include/configs/atngw100.h diff --git a/board/atmel/atstk1000/MAINTAINERS b/board/atmel/atstk1000/MAINTAINERS index 76365b0..378e1b3 100644 --- a/board/atmel/atstk1000/MAINTAINERS +++ b/board/atmel/atstk1000/MAINTAINERS @@ -1,5 +1,5 @@ ATSTK1000 BOARD -M: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> +#M: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> S: Orphan (since 2014-06) F: board/atmel/atstk1000/ F: include/configs/atstk1002.h diff --git a/board/bc3450/MAINTAINERS b/board/bc3450/MAINTAINERS index e2a8363..81a7076 100644 --- a/board/bc3450/MAINTAINERS +++ b/board/bc3450/MAINTAINERS @@ -1,5 +1,5 @@ BC3450 BOARD -M: - +#M: - S: Maintained F: board/bc3450/ F: include/configs/BC3450.h diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 60a09f4..7edfe19 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -328,6 +328,11 @@ int board_mmc_init(bd_t *bis) #endif #ifdef CONFIG_MXC_SPI +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -1; +} + iomux_v3_cfg_t const ecspi1_pads[] = { /* SS1 */ MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), diff --git a/board/calao/sbc35_a9g20/MAINTAINERS b/board/calao/sbc35_a9g20/MAINTAINERS index d275230..0ac8225 100644 --- a/board/calao/sbc35_a9g20/MAINTAINERS +++ b/board/calao/sbc35_a9g20/MAINTAINERS @@ -1,5 +1,5 @@ SBC35_A9G20 BOARD -M: Albin Tonnerre <albin.tonnerre@free-electrons.com> +#M: Albin Tonnerre <albin.tonnerre@free-electrons.com> S: Orphan (since 2014-06) F: board/calao/sbc35_a9g20/ F: include/configs/sbc35_a9g20.h diff --git a/board/calao/tny_a9260/MAINTAINERS b/board/calao/tny_a9260/MAINTAINERS index 5a71b8e..1f24e39 100644 --- a/board/calao/tny_a9260/MAINTAINERS +++ b/board/calao/tny_a9260/MAINTAINERS @@ -1,5 +1,5 @@ TNY_A9260 BOARD -M: Albin Tonnerre <albin.tonnerre@free-electrons.com> +#M: Albin Tonnerre <albin.tonnerre@free-electrons.com> S: Orphan (since 2014-06) F: board/calao/tny_a9260/ F: include/configs/tny_a9260.h diff --git a/board/canmb/MAINTAINERS b/board/canmb/MAINTAINERS index aa4eb30..71750ea 100644 --- a/board/canmb/MAINTAINERS +++ b/board/canmb/MAINTAINERS @@ -1,5 +1,5 @@ CANMB BOARD -M: - +#M: - S: Maintained F: board/canmb/ F: include/configs/canmb.h diff --git a/board/cm-bf527/MAINTAINERS b/board/cm-bf527/MAINTAINERS index 789f5c4..fefcfcf 100644 --- a/board/cm-bf527/MAINTAINERS +++ b/board/cm-bf527/MAINTAINERS @@ -1,5 +1,5 @@ CM-BF527 BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/cm-bf527/ F: include/configs/cm-bf527.h diff --git a/board/cm-bf533/MAINTAINERS b/board/cm-bf533/MAINTAINERS index f643043..0bf51fb 100644 --- a/board/cm-bf533/MAINTAINERS +++ b/board/cm-bf533/MAINTAINERS @@ -1,5 +1,5 @@ CM-BF533 BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/cm-bf533/ F: include/configs/cm-bf533.h diff --git a/board/cm-bf537e/MAINTAINERS b/board/cm-bf537e/MAINTAINERS index 44735fa..63d2428 100644 --- a/board/cm-bf537e/MAINTAINERS +++ b/board/cm-bf537e/MAINTAINERS @@ -1,5 +1,5 @@ CM-BF537E BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/cm-bf537e/ F: include/configs/cm-bf537e.h diff --git a/board/cm-bf537u/MAINTAINERS b/board/cm-bf537u/MAINTAINERS index da925f8..a89cfca 100644 --- a/board/cm-bf537u/MAINTAINERS +++ b/board/cm-bf537u/MAINTAINERS @@ -1,5 +1,5 @@ CM-BF537U BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/cm-bf537u/ F: include/configs/cm-bf537u.h diff --git a/board/cm-bf548/MAINTAINERS b/board/cm-bf548/MAINTAINERS index 4cd83df..b7f5779 100644 --- a/board/cm-bf548/MAINTAINERS +++ b/board/cm-bf548/MAINTAINERS @@ -1,5 +1,5 @@ CM-BF548 BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/cm-bf548/ F: include/configs/cm-bf548.h diff --git a/board/cm-bf561/MAINTAINERS b/board/cm-bf561/MAINTAINERS index a4606ff..9c86c8d 100644 --- a/board/cm-bf561/MAINTAINERS +++ b/board/cm-bf561/MAINTAINERS @@ -1,5 +1,5 @@ CM-BF561 BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/cm-bf561/ F: include/configs/cm-bf561.h diff --git a/board/cm41xx/MAINTAINERS b/board/cm41xx/MAINTAINERS index f308b0f..f10eeb5 100644 --- a/board/cm41xx/MAINTAINERS +++ b/board/cm41xx/MAINTAINERS @@ -1,5 +1,5 @@ CM41XX BOARD -M: - +#M: - S: Maintained F: board/cm41xx/ F: include/configs/cm41xx.h diff --git a/board/cm5200/MAINTAINERS b/board/cm5200/MAINTAINERS index 9fc5365..1e1df3f 100644 --- a/board/cm5200/MAINTAINERS +++ b/board/cm5200/MAINTAINERS @@ -1,5 +1,5 @@ CM5200 BOARD -M: - +#M: - S: Maintained F: board/cm5200/ F: include/configs/cm5200.h diff --git a/board/cmi/MAINTAINERS b/board/cmi/MAINTAINERS index ab33d5d..60701bf 100644 --- a/board/cmi/MAINTAINERS +++ b/board/cmi/MAINTAINERS @@ -1,5 +1,5 @@ CMI BOARD -M: - +#M: - S: Maintained F: board/cmi/ F: include/configs/cmi_mpc5xx.h diff --git a/board/cobra5272/MAINTAINERS b/board/cobra5272/MAINTAINERS index 00942fc..a064da2 100644 --- a/board/cobra5272/MAINTAINERS +++ b/board/cobra5272/MAINTAINERS @@ -1,5 +1,5 @@ COBRA5272 BOARD -M: - +#M: - S: Maintained F: board/cobra5272/ F: include/configs/cobra5272.h diff --git a/board/congatec/cgtqmx6eval/MAINTAINERS b/board/congatec/cgtqmx6eval/MAINTAINERS index 53ad759..35f4a2a 100644 --- a/board/congatec/cgtqmx6eval/MAINTAINERS +++ b/board/congatec/cgtqmx6eval/MAINTAINERS @@ -1,5 +1,5 @@ CGTQMX6EVAL BOARD -M: Leo Sartre <lsartre@adeneo-embedded.com> +#M: Leo Sartre <lsartre@adeneo-embedded.com> S: Orphan (since 2014-06) F: board/congatec/cgtqmx6eval/ F: include/configs/cgtqmx6eval.h diff --git a/board/cpu87/MAINTAINERS b/board/cpu87/MAINTAINERS index 6e84f60..32804ea 100644 --- a/board/cpu87/MAINTAINERS +++ b/board/cpu87/MAINTAINERS @@ -1,5 +1,5 @@ CPU87 BOARD -M: - +#M: - S: Maintained F: board/cpu87/ F: include/configs/CPU87.h diff --git a/board/cray/L1/MAINTAINERS b/board/cray/L1/MAINTAINERS index e93819e..e43e91f 100644 --- a/board/cray/L1/MAINTAINERS +++ b/board/cray/L1/MAINTAINERS @@ -1,5 +1,5 @@ L1 BOARD -M: David Updegraff <dave@cray.com> +#M: David Updegraff <dave@cray.com> S: Orphan (since 2014-03) F: board/cray/L1/ F: include/configs/CRAYL1.h diff --git a/board/dave/PPChameleonEVB/MAINTAINERS b/board/dave/PPChameleonEVB/MAINTAINERS index 3af5b57..d43c6d0 100644 --- a/board/dave/PPChameleonEVB/MAINTAINERS +++ b/board/dave/PPChameleonEVB/MAINTAINERS @@ -1,5 +1,5 @@ PPCHAMELEONEVB BOARD -M: - +#M: - S: Maintained F: board/dave/PPChameleonEVB/ F: include/configs/CATcenter.h diff --git a/board/davinci/dm355evm/MAINTAINERS b/board/davinci/dm355evm/MAINTAINERS index ef586b3..c017e09 100644 --- a/board/davinci/dm355evm/MAINTAINERS +++ b/board/davinci/dm355evm/MAINTAINERS @@ -1,5 +1,5 @@ DM355EVM BOARD -M: Sandeep Paulraj <s-paulraj@ti.com> +#M: Sandeep Paulraj <s-paulraj@ti.com> S: Orphan (since 2014-08) F: board/davinci/dm355evm/ F: include/configs/davinci_dm355evm.h diff --git a/board/davinci/dm355leopard/MAINTAINERS b/board/davinci/dm355leopard/MAINTAINERS index 2fc1e00..ed04d43 100644 --- a/board/davinci/dm355leopard/MAINTAINERS +++ b/board/davinci/dm355leopard/MAINTAINERS @@ -1,5 +1,5 @@ DM355LEOPARD BOARD -M: Sandeep Paulraj <s-paulraj@ti.com> +#M: Sandeep Paulraj <s-paulraj@ti.com> S: Orphan (since 2014-08) F: board/davinci/dm355leopard/ F: include/configs/davinci_dm355leopard.h diff --git a/board/davinci/dm365evm/MAINTAINERS b/board/davinci/dm365evm/MAINTAINERS index 0bfe02d..97c3ed3 100644 --- a/board/davinci/dm365evm/MAINTAINERS +++ b/board/davinci/dm365evm/MAINTAINERS @@ -1,5 +1,5 @@ DM365EVM BOARD -M: Sandeep Paulraj <s-paulraj@ti.com> +#M: Sandeep Paulraj <s-paulraj@ti.com> S: Orphan (since 2014-08) F: board/davinci/dm365evm/ F: include/configs/davinci_dm365evm.h diff --git a/board/davinci/dm6467evm/MAINTAINERS b/board/davinci/dm6467evm/MAINTAINERS index bb40536..8ca53c4 100644 --- a/board/davinci/dm6467evm/MAINTAINERS +++ b/board/davinci/dm6467evm/MAINTAINERS @@ -1,5 +1,5 @@ DM6467EVM BOARD -M: Sandeep Paulraj <s-paulraj@ti.com> +#M: Sandeep Paulraj <s-paulraj@ti.com> S: Orphan (since 2014-08) F: board/davinci/dm6467evm/ F: include/configs/davinci_dm6467evm.h diff --git a/board/davinci/dvevm/MAINTAINERS b/board/davinci/dvevm/MAINTAINERS index 4b3ce45..a718b90 100644 --- a/board/davinci/dvevm/MAINTAINERS +++ b/board/davinci/dvevm/MAINTAINERS @@ -1,5 +1,5 @@ DVEVM BOARD -M: - +#M: - S: Maintained F: board/davinci/dvevm/ F: include/configs/davinci_dvevm.h diff --git a/board/davinci/schmoogie/MAINTAINERS b/board/davinci/schmoogie/MAINTAINERS index b1fc29c..808e7fc 100644 --- a/board/davinci/schmoogie/MAINTAINERS +++ b/board/davinci/schmoogie/MAINTAINERS @@ -1,5 +1,5 @@ SCHMOOGIE BOARD -M: - +#M: - S: Maintained F: board/davinci/schmoogie/ F: include/configs/davinci_schmoogie.h diff --git a/board/davinci/sffsdr/MAINTAINERS b/board/davinci/sffsdr/MAINTAINERS index 428d003..5c7e132 100644 --- a/board/davinci/sffsdr/MAINTAINERS +++ b/board/davinci/sffsdr/MAINTAINERS @@ -1,5 +1,5 @@ SFFSDR BOARD -M: - +#M: - S: Maintained F: board/davinci/sffsdr/ F: include/configs/davinci_sffsdr.h diff --git a/board/davinci/sonata/MAINTAINERS b/board/davinci/sonata/MAINTAINERS index 625978c..40659e5 100644 --- a/board/davinci/sonata/MAINTAINERS +++ b/board/davinci/sonata/MAINTAINERS @@ -1,5 +1,5 @@ SONATA BOARD -M: - +#M: - S: Maintained F: board/davinci/sonata/ F: include/configs/davinci_sonata.h diff --git a/board/earthlcd/favr-32-ezkit/MAINTAINERS b/board/earthlcd/favr-32-ezkit/MAINTAINERS index 30453c6..89ba862 100644 --- a/board/earthlcd/favr-32-ezkit/MAINTAINERS +++ b/board/earthlcd/favr-32-ezkit/MAINTAINERS @@ -1,5 +1,5 @@ FAVR-32-EZKIT BOARD -M: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> +#M: Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com> S: Orphan (since 2014-06) F: board/earthlcd/favr-32-ezkit/ F: include/configs/favr-32-ezkit.h diff --git a/board/eltec/elppc/MAINTAINERS b/board/eltec/elppc/MAINTAINERS index 5258b3a..e3b35f1 100644 --- a/board/eltec/elppc/MAINTAINERS +++ b/board/eltec/elppc/MAINTAINERS @@ -1,5 +1,5 @@ ELPPC BOARD -M: - +#M: - S: Maintained F: board/eltec/elppc/ F: include/configs/ELPPC.h diff --git a/board/eltec/mhpc/u-boot.lds b/board/eltec/mhpc/u-boot.lds deleted file mode 100644 index 7ae91ff..0000000 --- a/board/eltec/mhpc/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2001-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/embest/mx6boards/mx6boards.c b/board/embest/mx6boards/mx6boards.c index 530ea4f..a725f15 100644 --- a/board/embest/mx6boards/mx6boards.c +++ b/board/embest/mx6boards/mx6boards.c @@ -285,6 +285,11 @@ iomux_v3_cfg_t const ecspi1_pads[] = { MX6_PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL), }; +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(2, 30)) : -1; +} + static void setup_spi(void) { imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); diff --git a/board/emk/top860/u-boot.lds b/board/emk/top860/u-boot.lds deleted file mode 100644 index 79fcbf4..0000000 --- a/board/emk/top860/u-boot.lds +++ /dev/null @@ -1,83 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/ep8260/MAINTAINERS b/board/ep8260/MAINTAINERS index bb273df..bfa923c 100644 --- a/board/ep8260/MAINTAINERS +++ b/board/ep8260/MAINTAINERS @@ -1,5 +1,5 @@ EP8260 BOARD -M: Frank Panno <fpanno@delphintech.com> +#M: Frank Panno <fpanno@delphintech.com> S: Orphan (since 2014-06) F: board/ep8260/ F: include/configs/ep8260.h diff --git a/board/ep82xxm/MAINTAINERS b/board/ep82xxm/MAINTAINERS index 822261b..c053df9 100644 --- a/board/ep82xxm/MAINTAINERS +++ b/board/ep82xxm/MAINTAINERS @@ -1,5 +1,5 @@ EP82XXM BOARD -M: - +#M: - S: Maintained F: board/ep82xxm/ F: include/configs/ep82xxm.h diff --git a/board/esg/ima3-mx53/MAINTAINERS b/board/esg/ima3-mx53/MAINTAINERS index c434eb9..96de081 100644 --- a/board/esg/ima3-mx53/MAINTAINERS +++ b/board/esg/ima3-mx53/MAINTAINERS @@ -1,5 +1,5 @@ IMA3-MX53 BOARD -M: - +#M: - S: Maintained F: board/esg/ima3-mx53/ F: include/configs/ima3-mx53.h diff --git a/board/espt/MAINTAINERS b/board/espt/MAINTAINERS index ff6e20c..fdbbc3e 100644 --- a/board/espt/MAINTAINERS +++ b/board/espt/MAINTAINERS @@ -1,5 +1,5 @@ ESPT BOARD -M: - +#M: - S: Maintained F: board/espt/ F: include/configs/espt.h diff --git a/board/evb64260/MAINTAINERS b/board/evb64260/MAINTAINERS index f8307cc..d50dda5 100644 --- a/board/evb64260/MAINTAINERS +++ b/board/evb64260/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/P3G4.h F: configs/P3G4_defconfig ZUMA BOARD -M: Nye Liu <nyet@zumanetworks.com> +#M: Nye Liu <nyet@zumanetworks.com> S: Orphan (since 2014-04) F: include/configs/ZUMA.h F: configs/ZUMA_defconfig diff --git a/board/exmeritus/hww1u1a/MAINTAINERS b/board/exmeritus/hww1u1a/MAINTAINERS index e2fe2a6..b37f10b 100644 --- a/board/exmeritus/hww1u1a/MAINTAINERS +++ b/board/exmeritus/hww1u1a/MAINTAINERS @@ -1,5 +1,5 @@ HWW1U1A BOARD -M: Kyle Moffett <Kyle.D.Moffett@boeing.com> +#M: Kyle Moffett <Kyle.D.Moffett@boeing.com> S: Orphan (since 2014-06) F: board/exmeritus/hww1u1a/ F: include/configs/HWW1U1A.h diff --git a/board/freescale/b4860qds/MAINTAINERS b/board/freescale/b4860qds/MAINTAINERS index 9f9a612..ac02bb7 100644 --- a/board/freescale/b4860qds/MAINTAINERS +++ b/board/freescale/b4860qds/MAINTAINERS @@ -1,5 +1,5 @@ B4860QDS BOARD -M: - +#M: - S: Maintained F: board/freescale/b4860qds/ F: include/configs/B4860QDS.h diff --git a/board/freescale/common/ics307_clk.c b/board/freescale/common/ics307_clk.c index 6789efb..e683be3 100644 --- a/board/freescale/common/ics307_clk.c +++ b/board/freescale/common/ics307_clk.c @@ -67,7 +67,7 @@ unsigned long ics307_sysclk_calculator(unsigned long out_freq) continue; /* Calculate the temp out frequency */ tmp_out = input_freq * 2 * vdw / (rdw * od * 1000); - diff = MAX(out_freq, tmp_out) - MIN(out_freq, tmp_out); + diff = max(out_freq, tmp_out) - min(out_freq, tmp_out); /* * calculate the percent, the precision is 1/1000 * If greater than 1/1000, continue diff --git a/board/freescale/corenet_ds/MAINTAINERS b/board/freescale/corenet_ds/MAINTAINERS index 841d82f..c8ca674 100644 --- a/board/freescale/corenet_ds/MAINTAINERS +++ b/board/freescale/corenet_ds/MAINTAINERS @@ -1,5 +1,5 @@ CORENET_DS BOARD -M: - +#M: - S: Maintained F: board/freescale/corenet_ds/ F: include/configs/P3041DS.h diff --git a/board/freescale/m5208evbe/MAINTAINERS b/board/freescale/m5208evbe/MAINTAINERS index 65d04df..c9c3c88 100644 --- a/board/freescale/m5208evbe/MAINTAINERS +++ b/board/freescale/m5208evbe/MAINTAINERS @@ -1,5 +1,5 @@ M5208EVBE BOARD -M: - +#M: - S: Maintained F: board/freescale/m5208evbe/ F: include/configs/M5208EVBE.h diff --git a/board/freescale/m5249evb/MAINTAINERS b/board/freescale/m5249evb/MAINTAINERS index 22301b7..c2273c3 100644 --- a/board/freescale/m5249evb/MAINTAINERS +++ b/board/freescale/m5249evb/MAINTAINERS @@ -1,5 +1,5 @@ M5249EVB BOARD -M: - +#M: - S: Maintained F: board/freescale/m5249evb/ F: include/configs/M5249EVB.h diff --git a/board/freescale/m5253evbe/MAINTAINERS b/board/freescale/m5253evbe/MAINTAINERS index 1c21b03..74acd1e 100644 --- a/board/freescale/m5253evbe/MAINTAINERS +++ b/board/freescale/m5253evbe/MAINTAINERS @@ -1,5 +1,5 @@ M5253EVBE BOARD -M: Hayden Fraser <Hayden.Fraser@freescale.com> +#M: Hayden Fraser <Hayden.Fraser@freescale.com> S: Orphan (since 2014-06) F: board/freescale/m5253evbe/ F: include/configs/M5253EVBE.h diff --git a/board/freescale/m5272c3/MAINTAINERS b/board/freescale/m5272c3/MAINTAINERS index aa4739f..e586630 100644 --- a/board/freescale/m5272c3/MAINTAINERS +++ b/board/freescale/m5272c3/MAINTAINERS @@ -1,5 +1,5 @@ M5272C3 BOARD -M: - +#M: - S: Maintained F: board/freescale/m5272c3/ F: include/configs/M5272C3.h diff --git a/board/freescale/m5275evb/MAINTAINERS b/board/freescale/m5275evb/MAINTAINERS index b87d52c..4e6dbb1 100644 --- a/board/freescale/m5275evb/MAINTAINERS +++ b/board/freescale/m5275evb/MAINTAINERS @@ -1,5 +1,5 @@ M5275EVB BOARD -M: - +#M: - S: Maintained F: board/freescale/m5275evb/ F: include/configs/M5275EVB.h diff --git a/board/freescale/m5282evb/MAINTAINERS b/board/freescale/m5282evb/MAINTAINERS index f945ab4..305e748 100644 --- a/board/freescale/m5282evb/MAINTAINERS +++ b/board/freescale/m5282evb/MAINTAINERS @@ -1,5 +1,5 @@ M5282EVB BOARD -M: - +#M: - S: Maintained F: board/freescale/m5282evb/ F: include/configs/M5282EVB.h diff --git a/board/freescale/m54418twr/MAINTAINERS b/board/freescale/m54418twr/MAINTAINERS index 37b24c7..f88aed9 100644 --- a/board/freescale/m54418twr/MAINTAINERS +++ b/board/freescale/m54418twr/MAINTAINERS @@ -1,5 +1,5 @@ M54418TWR BOARD -M: - +#M: - S: Maintained F: board/freescale/m54418twr/ F: include/configs/M54418TWR.h diff --git a/board/freescale/m54451evb/MAINTAINERS b/board/freescale/m54451evb/MAINTAINERS index be14549..52a2681 100644 --- a/board/freescale/m54451evb/MAINTAINERS +++ b/board/freescale/m54451evb/MAINTAINERS @@ -1,5 +1,5 @@ M54451EVB BOARD -M: - +#M: - S: Maintained F: board/freescale/m54451evb/ F: include/configs/M54451EVB.h diff --git a/board/freescale/mpc5121ads/MAINTAINERS b/board/freescale/mpc5121ads/MAINTAINERS index 0c7f682..d4aab8f 100644 --- a/board/freescale/mpc5121ads/MAINTAINERS +++ b/board/freescale/mpc5121ads/MAINTAINERS @@ -1,5 +1,5 @@ MPC5121ADS BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc5121ads/ F: include/configs/mpc5121ads.h diff --git a/board/freescale/mpc8313erdb/MAINTAINERS b/board/freescale/mpc8313erdb/MAINTAINERS index 923ba95..807fb0b 100644 --- a/board/freescale/mpc8313erdb/MAINTAINERS +++ b/board/freescale/mpc8313erdb/MAINTAINERS @@ -1,5 +1,5 @@ MPC8313ERDB BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8313erdb/ F: include/configs/MPC8313ERDB.h diff --git a/board/freescale/mpc8349itx/MAINTAINERS b/board/freescale/mpc8349itx/MAINTAINERS index ed6e4e5..d0388ad 100644 --- a/board/freescale/mpc8349itx/MAINTAINERS +++ b/board/freescale/mpc8349itx/MAINTAINERS @@ -1,5 +1,5 @@ MPC8349ITX BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8349itx/ F: include/configs/MPC8349ITX.h diff --git a/board/freescale/mpc8360erdk/MAINTAINERS b/board/freescale/mpc8360erdk/MAINTAINERS index cb075d6..e5b5995 100644 --- a/board/freescale/mpc8360erdk/MAINTAINERS +++ b/board/freescale/mpc8360erdk/MAINTAINERS @@ -1,5 +1,5 @@ MPC8360ERDK BOARD -M: Anton Vorontsov <avorontsov@ru.mvista.com> +#M: Anton Vorontsov <avorontsov@ru.mvista.com> S: Orphan (since 2014-03) F: board/freescale/mpc8360erdk/ F: include/configs/MPC8360ERDK.h diff --git a/board/freescale/mpc837xerdb/MAINTAINERS b/board/freescale/mpc837xerdb/MAINTAINERS index c216d8d..8592a2c 100644 --- a/board/freescale/mpc837xerdb/MAINTAINERS +++ b/board/freescale/mpc837xerdb/MAINTAINERS @@ -1,5 +1,5 @@ MPC837XERDB BOARD -M: Joe D'Abbraccio <ljd015@freescale.com> +#M: Joe D'Abbraccio <ljd015@freescale.com> S: Orphan (since 2014-06) F: board/freescale/mpc837xerdb/ F: include/configs/MPC837XERDB.h diff --git a/board/freescale/mpc8536ds/MAINTAINERS b/board/freescale/mpc8536ds/MAINTAINERS index 51d7cd7..953072c 100644 --- a/board/freescale/mpc8536ds/MAINTAINERS +++ b/board/freescale/mpc8536ds/MAINTAINERS @@ -1,5 +1,5 @@ MPC8536DS BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8536ds/ F: include/configs/MPC8536DS.h diff --git a/board/freescale/mpc8540ads/MAINTAINERS b/board/freescale/mpc8540ads/MAINTAINERS index 41a2191..acc4821 100644 --- a/board/freescale/mpc8540ads/MAINTAINERS +++ b/board/freescale/mpc8540ads/MAINTAINERS @@ -1,5 +1,5 @@ MPC8540ADS BOARD -M: Kumar Gala <kumar.gala@freescale.com> +#M: Kumar Gala <kumar.gala@freescale.com> S: Orphan (since 2014-06) F: board/freescale/mpc8540ads/ F: include/configs/MPC8540ADS.h diff --git a/board/freescale/mpc8541cds/MAINTAINERS b/board/freescale/mpc8541cds/MAINTAINERS index 073210d..d421b12 100644 --- a/board/freescale/mpc8541cds/MAINTAINERS +++ b/board/freescale/mpc8541cds/MAINTAINERS @@ -1,5 +1,5 @@ MPC8541CDS BOARD -M: Kumar Gala <kumar.gala@freescale.com> +#M: Kumar Gala <kumar.gala@freescale.com> S: Orphan (since 2014-06) F: board/freescale/mpc8541cds/ F: include/configs/MPC8541CDS.h diff --git a/board/freescale/mpc8544ds/MAINTAINERS b/board/freescale/mpc8544ds/MAINTAINERS index 81b664c..328be7f 100644 --- a/board/freescale/mpc8544ds/MAINTAINERS +++ b/board/freescale/mpc8544ds/MAINTAINERS @@ -1,5 +1,5 @@ MPC8544DS BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8544ds/ F: include/configs/MPC8544DS.h diff --git a/board/freescale/mpc8548cds/MAINTAINERS b/board/freescale/mpc8548cds/MAINTAINERS index 89b2425..6f22922 100644 --- a/board/freescale/mpc8548cds/MAINTAINERS +++ b/board/freescale/mpc8548cds/MAINTAINERS @@ -1,5 +1,5 @@ MPC8548CDS BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8548cds/ F: include/configs/MPC8548CDS.h diff --git a/board/freescale/mpc8555cds/MAINTAINERS b/board/freescale/mpc8555cds/MAINTAINERS index 14470d7..1ef6690 100644 --- a/board/freescale/mpc8555cds/MAINTAINERS +++ b/board/freescale/mpc8555cds/MAINTAINERS @@ -1,5 +1,5 @@ MPC8555CDS BOARD -M: Kumar Gala <kumar.gala@freescale.com> +#M: Kumar Gala <kumar.gala@freescale.com> S: Orphan (since 2014-06) F: board/freescale/mpc8555cds/ F: include/configs/MPC8555CDS.h diff --git a/board/freescale/mpc8560ads/MAINTAINERS b/board/freescale/mpc8560ads/MAINTAINERS index 836def2..96e6da2 100644 --- a/board/freescale/mpc8560ads/MAINTAINERS +++ b/board/freescale/mpc8560ads/MAINTAINERS @@ -1,5 +1,5 @@ MPC8560ADS BOARD -M: Kumar Gala <kumar.gala@freescale.com> +#M: Kumar Gala <kumar.gala@freescale.com> S: Orphan (since 2014-06) F: board/freescale/mpc8560ads/ F: include/configs/MPC8560ADS.h diff --git a/board/freescale/mpc8568mds/MAINTAINERS b/board/freescale/mpc8568mds/MAINTAINERS index 72c25f5..379d8cc 100644 --- a/board/freescale/mpc8568mds/MAINTAINERS +++ b/board/freescale/mpc8568mds/MAINTAINERS @@ -1,5 +1,5 @@ MPC8568MDS BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8568mds/ F: include/configs/MPC8568MDS.h diff --git a/board/freescale/mpc8569mds/MAINTAINERS b/board/freescale/mpc8569mds/MAINTAINERS index b5478db..c181407 100644 --- a/board/freescale/mpc8569mds/MAINTAINERS +++ b/board/freescale/mpc8569mds/MAINTAINERS @@ -1,5 +1,5 @@ MPC8569MDS BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8569mds/ F: include/configs/MPC8569MDS.h diff --git a/board/freescale/mpc8610hpcd/MAINTAINERS b/board/freescale/mpc8610hpcd/MAINTAINERS index 993c02a..de6ab89 100644 --- a/board/freescale/mpc8610hpcd/MAINTAINERS +++ b/board/freescale/mpc8610hpcd/MAINTAINERS @@ -1,5 +1,5 @@ MPC8610HPCD BOARD -M: - +#M: - S: Maintained F: board/freescale/mpc8610hpcd/ F: include/configs/MPC8610HPCD.h diff --git a/board/freescale/mpc8641hpcn/MAINTAINERS b/board/freescale/mpc8641hpcn/MAINTAINERS index 34bcc6c..9790247 100644 --- a/board/freescale/mpc8641hpcn/MAINTAINERS +++ b/board/freescale/mpc8641hpcn/MAINTAINERS @@ -1,5 +1,5 @@ MPC8641HPCN BOARD -M: Kumar Gala <kumar.gala@freescale.com> +#M: Kumar Gala <kumar.gala@freescale.com> S: Orphan (since 2014-06) F: board/freescale/mpc8641hpcn/ F: include/configs/MPC8641HPCN.h diff --git a/board/freescale/mx31ads/MAINTAINERS b/board/freescale/mx31ads/MAINTAINERS index e9c8fe7..5f6ec26 100644 --- a/board/freescale/mx31ads/MAINTAINERS +++ b/board/freescale/mx31ads/MAINTAINERS @@ -1,5 +1,5 @@ MX31ADS BOARD -M: (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de> +#M: (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de> S: Orphan (since 2013-09) F: board/freescale/mx31ads/ F: include/configs/mx31ads.h diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index 928dadf..836d722 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -259,6 +259,13 @@ int board_init(void) return 0; } +#ifdef CONFIG_MXC_SPI +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1; +} +#endif + #ifdef CONFIG_CMD_BMODE static const struct boot_mode board_boot_modes[] = { /* 4 bit bus width */ diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index 80c8ebd..81dcd6e 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -513,6 +513,13 @@ static int pfuze_init(void) return 0; } +#ifdef CONFIG_MXC_SPI +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 9)) : -1; +} +#endif + #ifdef CONFIG_CMD_BMODE static const struct boot_mode board_boot_modes[] = { /* 4 bit bus width */ diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index a990b4c..a0832f4 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -82,6 +82,11 @@ static iomux_v3_cfg_t ecspi1_pads[] = { MX6_PAD_ECSPI1_SS0__GPIO4_IO11 | MUX_PAD_CTRL(NO_PAD_CTRL), }; +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(4, 11)) : -1; +} + static void setup_spi(void) { imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); diff --git a/board/freescale/p1010rdb/MAINTAINERS b/board/freescale/p1010rdb/MAINTAINERS index 579e775..db00143 100644 --- a/board/freescale/p1010rdb/MAINTAINERS +++ b/board/freescale/p1010rdb/MAINTAINERS @@ -1,5 +1,5 @@ P1010RDB BOARD -M: - +#M: - S: Maintained F: board/freescale/p1010rdb/ F: include/configs/P1010RDB.h diff --git a/board/freescale/p1023rdb/MAINTAINERS b/board/freescale/p1023rdb/MAINTAINERS index 81501aa..c06bac6 100644 --- a/board/freescale/p1023rdb/MAINTAINERS +++ b/board/freescale/p1023rdb/MAINTAINERS @@ -1,5 +1,5 @@ P1023RDB BOARD -M: - +#M: - S: Maintained F: board/freescale/p1023rdb/ F: include/configs/P1023RDB.h diff --git a/board/freescale/p1_p2_rdb/MAINTAINERS b/board/freescale/p1_p2_rdb/MAINTAINERS index ad0a858..aabf587 100644 --- a/board/freescale/p1_p2_rdb/MAINTAINERS +++ b/board/freescale/p1_p2_rdb/MAINTAINERS @@ -1,5 +1,5 @@ P1_P2_RDB BOARD -M: - +#M: - S: Maintained F: board/freescale/p1_p2_rdb/ F: include/configs/P1_P2_RDB.h diff --git a/board/freescale/p1_p2_rdb_pc/MAINTAINERS b/board/freescale/p1_p2_rdb_pc/MAINTAINERS index 4d429fe..c2e9247 100644 --- a/board/freescale/p1_p2_rdb_pc/MAINTAINERS +++ b/board/freescale/p1_p2_rdb_pc/MAINTAINERS @@ -1,5 +1,5 @@ P1_P2_RDB_PC BOARD -M: - +#M: - S: Maintained F: board/freescale/p1_p2_rdb_pc/ F: include/configs/p1_p2_rdb_pc.h diff --git a/board/freescale/p1_twr/MAINTAINERS b/board/freescale/p1_twr/MAINTAINERS index 2d7d7e1..c19d436 100644 --- a/board/freescale/p1_twr/MAINTAINERS +++ b/board/freescale/p1_twr/MAINTAINERS @@ -1,5 +1,5 @@ P1_TWR BOARD -M: - +#M: - S: Maintained F: board/freescale/p1_twr/ F: include/configs/p1_twr.h diff --git a/board/freescale/p2020ds/MAINTAINERS b/board/freescale/p2020ds/MAINTAINERS index 42cb18d..cb61fc5 100644 --- a/board/freescale/p2020ds/MAINTAINERS +++ b/board/freescale/p2020ds/MAINTAINERS @@ -1,5 +1,5 @@ P2020DS BOARD -M: - +#M: - S: Maintained F: board/freescale/p2020ds/ F: include/configs/P2020DS.h diff --git a/board/freescale/p2041rdb/MAINTAINERS b/board/freescale/p2041rdb/MAINTAINERS index bb5bb83..d93cb0b 100644 --- a/board/freescale/p2041rdb/MAINTAINERS +++ b/board/freescale/p2041rdb/MAINTAINERS @@ -1,5 +1,5 @@ P2041RDB BOARD -M: - +#M: - S: Maintained F: board/freescale/p2041rdb/ F: include/configs/P2041RDB.h diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c index 1929bba..06d9086 100644 --- a/board/freescale/t1040qds/eth.c +++ b/board/freescale/t1040qds/eth.c @@ -241,6 +241,8 @@ static void initialize_lane_to_slot(void) break; case 0xA7: lane_to_slot[1] = 7; + lane_to_slot[2] = 6; + lane_to_slot[3] = 5; lane_to_slot[7] = 7; break; case 0xAA: @@ -410,6 +412,8 @@ void t1040_handle_phy_interface_sgmii(int i) fm_info_set_phy_address(i, riser_phy_addr[1]); if (FM1_DTSEC3 == i) fm_info_set_phy_address(i, riser_phy_addr[2]); + if (FM1_DTSEC5 == i) + fm_info_set_phy_address(i, riser_phy_addr[3]); mdio_mux[i] = EMI1_SLOT7; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); diff --git a/board/freescale/t104xrdb/MAINTAINERS b/board/freescale/t104xrdb/MAINTAINERS index 364b0a9..b61e1c0 100644 --- a/board/freescale/t104xrdb/MAINTAINERS +++ b/board/freescale/t104xrdb/MAINTAINERS @@ -6,12 +6,13 @@ F: include/configs/T104xRDB.h F: configs/T1040RDB_defconfig F: configs/T1040RDB_NAND_defconfig F: configs/T1040RDB_SPIFLASH_defconfig +F: configs/T1042RDB_defconfig F: configs/T1042RDB_PI_defconfig F: configs/T1042RDB_PI_NAND_defconfig F: configs/T1042RDB_PI_SPIFLASH_defconfig T1040RDB_SDCARD BOARD -M: - +#M: - S: Maintained F: configs/T1040RDB_SDCARD_defconfig F: configs/T1042RDB_PI_SDCARD_defconfig diff --git a/board/freescale/t104xrdb/README b/board/freescale/t104xrdb/README index cdbe1fa..ac95b5e 100644 --- a/board/freescale/t104xrdb/README +++ b/board/freescale/t104xrdb/README @@ -4,10 +4,23 @@ The T1040RDB is a Freescale reference board that hosts the T1040 SoC (and variants). Variants inclued T1042 presonality of T1040, in which case T1040RDB can also be called T1042RDB. +The T1042RDB is a Freescale reference board that hosts the T1042 SoC +(and variants). The board is similar to T1040RDB, T1040 is a reduced +personality of T1040 SoC without Integrated 8-port Gigabit(L2 Switch). + The T1042RDB_PI is a Freescale reference board that hosts the T1042 SoC. (a personality of T1040 SoC). The board is similar to T1040RDB but is designed specially with low power features targeted for Printing Image Market. +Basic difference's among T1040RDB, T1042RDB_PI, T1042RDB +------------------------------------------------------------------------- +Board Si Protocol Targeted Market +------------------------------------------------------------------------- +T1040RDB T1040 0x66 Networking +T1040RDB T1042 0x86 Networking +T1042RDB_PI T1042 0x06 Printing & Imaging + + T1040 SoC Overview ------------------ The QorIQ T1040/T1042 processor support four integrated 64-bit e5500 PA @@ -194,10 +207,10 @@ The below commands apply to the board Commands for switching to alternate bank. 1. To change from vbank0 to vbank4 - => qixis_reset altbank (it will boot using vbank4) + => cpld reset altbank (it will boot using vbank4) 2.To change from vbank4 to vbank0 - => qixis reset (it will boot using vbank0) + => cpld reset (it will boot using vbank0) NAND boot with 2 Stage boot loader ---------------------------------- @@ -259,15 +272,15 @@ Switch Settings: (ON is 0, OFF is 1) =============== NAND boot SW setting: SW1: 10001000 -SW2: 00111001 +SW2: 00111011 SW3: 11110001 SPI boot SW setting: SW1: 00100010 -SW2: 10111001 +SW2: 10111011 SW3: 11100001 SD boot SW setting: SW1: 00100000 -SW2: 00111001 +SW2: 00111011 SW3: 11100001 diff --git a/board/freescale/t104xrdb/ddr.c b/board/freescale/t104xrdb/ddr.c index 34c9224..2c331ee 100644 --- a/board/freescale/t104xrdb/ddr.c +++ b/board/freescale/t104xrdb/ddr.c @@ -105,8 +105,8 @@ found: popts->zq_en = 1; /* DHC_EN =1, ODT = 75 Ohm */ - popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_OFF); - popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_OFF); + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); } phys_size_t initdram(int board_type) diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c index 63e5f90..c8b6c67 100644 --- a/board/freescale/t104xrdb/eth.c +++ b/board/freescale/t104xrdb/eth.c @@ -43,6 +43,16 @@ int board_eth_init(bd_t *bis) CONFIG_SYS_SGMII1_PHY_ADDR); break; #endif +#ifdef CONFIG_T1042RDB + case PHY_INTERFACE_MODE_SGMII: + /* T1042RDB doesn't supports SGMII on DTSEC1 & DTSEC2 */ + if ((FM1_DTSEC1 == i) || (FM1_DTSEC2 == i)) + fm_info_set_phy_address(i, 0); + /* T1042RDB only supports SGMII on DTSEC3 */ + fm_info_set_phy_address(FM1_DTSEC3, + CONFIG_SYS_SGMII1_PHY_ADDR); + break; +#endif case PHY_INTERFACE_MODE_RGMII: if (FM1_DTSEC4 == i) phy_addr = CONFIG_SYS_RGMII1_PHY_ADDR; diff --git a/board/freescale/t104xrdb/t1042_pi_rcw.cfg b/board/freescale/t104xrdb/t1042_pi_rcw.cfg new file mode 100644 index 0000000..57de89a --- /dev/null +++ b/board/freescale/t104xrdb/t1042_pi_rcw.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 010e0100 +# serdes protocol 0x06 +0c18000e 0e000000 00000000 00000000 +06000002 00400002 e8106000 01000000 +00000000 00000000 00000000 00030810 +00000000 01fe0a06 00000000 00000000 diff --git a/board/freescale/t104xrdb/t1042_rcw.cfg b/board/freescale/t104xrdb/t1042_rcw.cfg index a3ea8ad..db4d52f 100644 --- a/board/freescale/t104xrdb/t1042_rcw.cfg +++ b/board/freescale/t104xrdb/t1042_rcw.cfg @@ -1,7 +1,7 @@ #PBL preamble and RCW header aa55aa55 010e0100 -# serdes protocol 0x66 +# serdes protocol 0x86 0c18000e 0e000000 00000000 00000000 -06000002 00400002 e8106000 01000000 -00000000 00000000 00000000 00030810 -00000000 01fe0a06 00000000 00000000 +86000002 80000002 ec027000 01000000 +00000000 00000000 00000000 00032810 +00000000 0342500f 00000000 00000000 diff --git a/board/freescale/t208xqds/MAINTAINERS b/board/freescale/t208xqds/MAINTAINERS index 643926f..deda092 100644 --- a/board/freescale/t208xqds/MAINTAINERS +++ b/board/freescale/t208xqds/MAINTAINERS @@ -1,5 +1,5 @@ T208XQDS BOARD -M: - +#M: - S: Maintained F: board/freescale/t208xqds/ F: include/configs/T208xQDS.h diff --git a/board/freescale/t208xrdb/MAINTAINERS b/board/freescale/t208xrdb/MAINTAINERS index 5987143..1642879 100644 --- a/board/freescale/t208xrdb/MAINTAINERS +++ b/board/freescale/t208xrdb/MAINTAINERS @@ -1,5 +1,5 @@ T208XRDB BOARD -M: - +#M: - S: Maintained F: board/freescale/t208xrdb/ F: include/configs/T208xRDB.h diff --git a/board/freescale/t4qds/MAINTAINERS b/board/freescale/t4qds/MAINTAINERS index da796bd..f88ee7d 100644 --- a/board/freescale/t4qds/MAINTAINERS +++ b/board/freescale/t4qds/MAINTAINERS @@ -1,5 +1,5 @@ T4QDS BOARD -M: - +#M: - S: Maintained F: board/freescale/t4qds/ F: include/configs/T4240QDS.h diff --git a/board/funkwerk/vovpn-gw/MAINTAINERS b/board/funkwerk/vovpn-gw/MAINTAINERS index 9af5f78..34d1cc1 100644 --- a/board/funkwerk/vovpn-gw/MAINTAINERS +++ b/board/funkwerk/vovpn-gw/MAINTAINERS @@ -1,5 +1,5 @@ VOVPN-GW BOARD -M: - +#M: - S: Maintained F: board/funkwerk/vovpn-gw/ F: include/configs/VoVPN-GW.h diff --git a/board/gaisler/gr_cpci_ax2000/MAINTAINERS b/board/gaisler/gr_cpci_ax2000/MAINTAINERS index 493c31e..df55a4c 100644 --- a/board/gaisler/gr_cpci_ax2000/MAINTAINERS +++ b/board/gaisler/gr_cpci_ax2000/MAINTAINERS @@ -1,5 +1,5 @@ GR_CPCI_AX2000 BOARD -M: - +#M: - S: Maintained F: board/gaisler/gr_cpci_ax2000/ F: include/configs/gr_cpci_ax2000.h diff --git a/board/gaisler/gr_ep2s60/MAINTAINERS b/board/gaisler/gr_ep2s60/MAINTAINERS index 151bef1..7acd5f4 100644 --- a/board/gaisler/gr_ep2s60/MAINTAINERS +++ b/board/gaisler/gr_ep2s60/MAINTAINERS @@ -1,5 +1,5 @@ GR_EP2S60 BOARD -M: - +#M: - S: Maintained F: board/gaisler/gr_ep2s60/ F: include/configs/gr_ep2s60.h diff --git a/board/gaisler/gr_xc3s_1500/MAINTAINERS b/board/gaisler/gr_xc3s_1500/MAINTAINERS index 187f323..c4179d2 100644 --- a/board/gaisler/gr_xc3s_1500/MAINTAINERS +++ b/board/gaisler/gr_xc3s_1500/MAINTAINERS @@ -1,5 +1,5 @@ GR_XC3S_1500 BOARD -M: - +#M: - S: Maintained F: board/gaisler/gr_xc3s_1500/ F: include/configs/gr_xc3s_1500.h diff --git a/board/gaisler/grsim/MAINTAINERS b/board/gaisler/grsim/MAINTAINERS index acb863c..4b3312e 100644 --- a/board/gaisler/grsim/MAINTAINERS +++ b/board/gaisler/grsim/MAINTAINERS @@ -1,5 +1,5 @@ GRSIM BOARD -M: - +#M: - S: Maintained F: board/gaisler/grsim/ F: include/configs/grsim.h diff --git a/board/gaisler/grsim_leon2/MAINTAINERS b/board/gaisler/grsim_leon2/MAINTAINERS index 6da9b78..bf4a950 100644 --- a/board/gaisler/grsim_leon2/MAINTAINERS +++ b/board/gaisler/grsim_leon2/MAINTAINERS @@ -1,5 +1,5 @@ GRSIM_LEON2 BOARD -M: - +#M: - S: Maintained F: board/gaisler/grsim_leon2/ F: include/configs/grsim_leon2.h diff --git a/board/galaxy5200/MAINTAINERS b/board/galaxy5200/MAINTAINERS index f070132..614625d 100644 --- a/board/galaxy5200/MAINTAINERS +++ b/board/galaxy5200/MAINTAINERS @@ -1,5 +1,5 @@ GALAXY5200 BOARD -M: Eric Millbrandt <emillbrandt@dekaresearch.com> +#M: Eric Millbrandt <emillbrandt@dekaresearch.com> S: Orphan (since 2014-06) F: board/galaxy5200/ F: include/configs/galaxy5200.h diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c index 8d086f8..1038d9d 100644 --- a/board/gateworks/gw_ventana/gw_ventana.c +++ b/board/gateworks/gw_ventana/gw_ventana.c @@ -356,9 +356,14 @@ iomux_v3_cfg_t const ecspi1_pads[] = { IOMUX_PADS(PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL)), }; +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(3, 19)) : -1; +} + static void setup_spi(void) { - gpio_direction_output(CONFIG_SF_DEFAULT_CS, 1); + gpio_direction_output(IMX_GPIO_NR(3, 19), 1); SETUP_IOMUX_PADS(ecspi1_pads); } #endif diff --git a/board/genesi/mx51_efikamx/MAINTAINERS b/board/genesi/mx51_efikamx/MAINTAINERS index a85df77..f1398c4 100644 --- a/board/genesi/mx51_efikamx/MAINTAINERS +++ b/board/genesi/mx51_efikamx/MAINTAINERS @@ -1,5 +1,5 @@ MX51_EFIKAMX BOARD -M: - +#M: - S: Maintained F: board/genesi/mx51_efikamx/ F: include/configs/mx51_efikamx.h diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c index 16769e5..137e4ed 100644 --- a/board/genesi/mx51_efikamx/efikamx.c +++ b/board/genesi/mx51_efikamx/efikamx.c @@ -152,6 +152,11 @@ static iomux_v3_cfg_t const efikamx_spi_pads[] = { * PMIC configuration */ #ifdef CONFIG_MXC_SPI +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 1) ? 121 : -1; +} + static void power_init(void) { unsigned int val; diff --git a/board/icecube/MAINTAINERS b/board/icecube/MAINTAINERS index 02e6c04..8a24eb4 100644 --- a/board/icecube/MAINTAINERS +++ b/board/icecube/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/IceCube.h F: configs/icecube_5200_defconfig ICECUBE_5200_DDR BOARD -M: - +#M: - S: Maintained F: configs/icecube_5200_DDR_defconfig F: configs/icecube_5200_DDR_LOWBOOT_defconfig diff --git a/board/imx31_phycore/MAINTAINERS b/board/imx31_phycore/MAINTAINERS index efd5e77..41f6cae 100644 --- a/board/imx31_phycore/MAINTAINERS +++ b/board/imx31_phycore/MAINTAINERS @@ -1,11 +1,11 @@ IMX31_PHYCORE BOARD -M: - +#M: - S: Maintained F: board/imx31_phycore/ F: include/configs/imx31_phycore.h F: configs/imx31_phycore_defconfig IMX31_PHYCORE_EET BOARD -M: (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de> +#M: (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de> S: Orphan (since 2013-09) F: configs/imx31_phycore_eet_defconfig diff --git a/board/ip04/MAINTAINERS b/board/ip04/MAINTAINERS index 278072b..c37b011 100644 --- a/board/ip04/MAINTAINERS +++ b/board/ip04/MAINTAINERS @@ -1,5 +1,5 @@ IP04 BOARD -M: Brent Kandetzki <brentk@teleco.com> +#M: Brent Kandetzki <brentk@teleco.com> S: Orphan (since 2014-06) F: board/ip04/ F: include/configs/ip04.h diff --git a/board/isee/igep00x0/MAINTAINERS b/board/isee/igep00x0/MAINTAINERS index fe4a8cd..3fc2c6c 100644 --- a/board/isee/igep00x0/MAINTAINERS +++ b/board/isee/igep00x0/MAINTAINERS @@ -8,7 +8,7 @@ F: configs/igep0030_defconfig F: configs/igep0032_defconfig IGEP0020_NAND BOARD -M: - +#M: - S: Maintained F: configs/igep0020_nand_defconfig F: configs/igep0030_nand_defconfig diff --git a/board/ivm/u-boot.lds b/board/ivm/u-boot.lds deleted file mode 100644 index 3d4fc8a..0000000 --- a/board/ivm/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/karo/tk71/MAINTAINERS b/board/karo/tk71/MAINTAINERS index 39b2b1d..ac85d6b 100644 --- a/board/karo/tk71/MAINTAINERS +++ b/board/karo/tk71/MAINTAINERS @@ -1,5 +1,5 @@ TK71 BOARD -M: - +#M: - S: Maintained F: board/karo/tk71/ F: include/configs/tk71.h diff --git a/board/kup/kup4k/u-boot.lds b/board/kup/kup4k/u-boot.lds deleted file mode 100644 index 0eb2fba..0000000 --- a/board/kup/kup4k/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/logicpd/imx31_litekit/MAINTAINERS b/board/logicpd/imx31_litekit/MAINTAINERS index 98cc7bd..8e3608e 100644 --- a/board/logicpd/imx31_litekit/MAINTAINERS +++ b/board/logicpd/imx31_litekit/MAINTAINERS @@ -1,5 +1,5 @@ IMX31_LITEKIT BOARD -M: - +#M: - S: Maintained F: board/logicpd/imx31_litekit/ F: include/configs/imx31_litekit.h diff --git a/board/lwmon/u-boot.lds b/board/lwmon/u-boot.lds deleted file mode 100644 index 90e2e2e..0000000 --- a/board/lwmon/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2001-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/manroland/hmi1001/MAINTAINERS b/board/manroland/hmi1001/MAINTAINERS index bdfdc01..a66a981 100644 --- a/board/manroland/hmi1001/MAINTAINERS +++ b/board/manroland/hmi1001/MAINTAINERS @@ -1,5 +1,5 @@ HMI1001 BOARD -M: - +#M: - S: Maintained F: board/manroland/hmi1001/ F: include/configs/hmi1001.h diff --git a/board/manroland/uc100/u-boot.lds b/board/manroland/uc100/u-boot.lds deleted file mode 100644 index 47f2de8..0000000 --- a/board/manroland/uc100/u-boot.lds +++ /dev/null @@ -1,85 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/matrix_vision/mergerbox/MAINTAINERS b/board/matrix_vision/mergerbox/MAINTAINERS index 22be981..20bd073 100644 --- a/board/matrix_vision/mergerbox/MAINTAINERS +++ b/board/matrix_vision/mergerbox/MAINTAINERS @@ -1,5 +1,5 @@ MERGERBOX BOARD -M: Andre Schwarz <andre.schwarz@matrix-vision.de> +#M: Andre Schwarz <andre.schwarz@matrix-vision.de> S: Orphan (since 2014-03) F: board/matrix_vision/mergerbox/ F: include/configs/MERGERBOX.h diff --git a/board/matrix_vision/mvbc_p/MAINTAINERS b/board/matrix_vision/mvbc_p/MAINTAINERS index 9e76b57..aad14ed 100644 --- a/board/matrix_vision/mvbc_p/MAINTAINERS +++ b/board/matrix_vision/mvbc_p/MAINTAINERS @@ -1,5 +1,5 @@ MVBC_P BOARD -M: Andre Schwarz <andre.schwarz@matrix-vision.de> +#M: Andre Schwarz <andre.schwarz@matrix-vision.de> S: Orphan (since 2014-03) F: board/matrix_vision/mvbc_p/ F: include/configs/MVBC_P.h diff --git a/board/matrix_vision/mvblm7/MAINTAINERS b/board/matrix_vision/mvblm7/MAINTAINERS index 4f7ca50..947a14e 100644 --- a/board/matrix_vision/mvblm7/MAINTAINERS +++ b/board/matrix_vision/mvblm7/MAINTAINERS @@ -1,5 +1,5 @@ MVBLM7 BOARD -M: Andre Schwarz <andre.schwarz@matrix-vision.de> +#M: Andre Schwarz <andre.schwarz@matrix-vision.de> S: Orphan (since 2014-03) F: board/matrix_vision/mvblm7/ F: include/configs/MVBLM7.h diff --git a/board/matrix_vision/mvsmr/MAINTAINERS b/board/matrix_vision/mvsmr/MAINTAINERS index 9659730..ae3cf9c 100644 --- a/board/matrix_vision/mvsmr/MAINTAINERS +++ b/board/matrix_vision/mvsmr/MAINTAINERS @@ -1,5 +1,5 @@ MVSMR BOARD -M: Andre Schwarz <andre.schwarz@matrix-vision.de> +#M: Andre Schwarz <andre.schwarz@matrix-vision.de> S: Orphan (since 2014-03) F: board/matrix_vision/mvsmr/ F: include/configs/MVSMR.h diff --git a/board/mcc200/MAINTAINERS b/board/mcc200/MAINTAINERS index 3d02bc6..a59a498 100644 --- a/board/mcc200/MAINTAINERS +++ b/board/mcc200/MAINTAINERS @@ -1,5 +1,5 @@ MCC200 BOARD -M: - +#M: - S: Maintained F: board/mcc200/ F: include/configs/mcc200.h diff --git a/board/micronas/vct/MAINTAINERS b/board/micronas/vct/MAINTAINERS index 4b825d3..cbaa585 100644 --- a/board/micronas/vct/MAINTAINERS +++ b/board/micronas/vct/MAINTAINERS @@ -1,5 +1,5 @@ VCT BOARD -M: - +#M: - S: Maintained F: board/micronas/vct/ F: include/configs/vct.h diff --git a/board/motionpro/MAINTAINERS b/board/motionpro/MAINTAINERS index 10a97cc..2f8b5cb 100644 --- a/board/motionpro/MAINTAINERS +++ b/board/motionpro/MAINTAINERS @@ -1,5 +1,5 @@ MOTIONPRO BOARD -M: - +#M: - S: Maintained F: board/motionpro/ F: include/configs/motionpro.h diff --git a/board/mpl/pati/MAINTAINERS b/board/mpl/pati/MAINTAINERS index f7c1bd8..19ad05d 100644 --- a/board/mpl/pati/MAINTAINERS +++ b/board/mpl/pati/MAINTAINERS @@ -1,5 +1,5 @@ PATI BOARD -M: - +#M: - S: Maintained F: board/mpl/pati/ F: include/configs/PATI.h diff --git a/board/munices/MAINTAINERS b/board/munices/MAINTAINERS index b8f5761..50d3e7e 100644 --- a/board/munices/MAINTAINERS +++ b/board/munices/MAINTAINERS @@ -1,5 +1,5 @@ MUNICES BOARD -M: - +#M: - S: Maintained F: board/munices/ F: include/configs/munices.h diff --git a/board/musenki/MAINTAINERS b/board/musenki/MAINTAINERS index 03a1fe7..4196c80 100644 --- a/board/musenki/MAINTAINERS +++ b/board/musenki/MAINTAINERS @@ -1,5 +1,5 @@ MUSENKI BOARD -M: Jim Thompson <jim@musenki.com> +#M: Jim Thompson <jim@musenki.com> S: Orphan (since 2014-04) F: board/musenki/ F: include/configs/MUSENKI.h diff --git a/board/mvblue/MAINTAINERS b/board/mvblue/MAINTAINERS index a809ba5..5955f1a 100644 --- a/board/mvblue/MAINTAINERS +++ b/board/mvblue/MAINTAINERS @@ -1,5 +1,5 @@ MVBLUE BOARD -M: - +#M: - S: Maintained F: board/mvblue/ F: include/configs/MVBLUE.h diff --git a/board/netvia/u-boot.lds b/board/netvia/u-boot.lds deleted file mode 100644 index 0dff5a4..0000000 --- a/board/netvia/u-boot.lds +++ /dev/null @@ -1,82 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - arch/powerpc/cpu/mpc8xx/start.o (.text*) - arch/powerpc/cpu/mpc8xx/traps.o (.text*) - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4); - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/palmtreo680/MAINTAINERS b/board/palmtreo680/MAINTAINERS index bdc034e..b0ff9d0 100644 --- a/board/palmtreo680/MAINTAINERS +++ b/board/palmtreo680/MAINTAINERS @@ -1,5 +1,5 @@ PALMTREO680 BOARD -M: Mike Dunn <mikedunn@newsguy.com> +#M: Mike Dunn <mikedunn@newsguy.com> S: Orphan (since 2014-06) F: board/palmtreo680/ F: include/configs/palmtreo680.h diff --git a/board/pb1x00/MAINTAINERS b/board/pb1x00/MAINTAINERS index 6c5c2bb..8326cc7 100644 --- a/board/pb1x00/MAINTAINERS +++ b/board/pb1x00/MAINTAINERS @@ -1,5 +1,5 @@ PB1X00 BOARD -M: - +#M: - S: Maintained F: board/pb1x00/ F: include/configs/pb1x00.h diff --git a/board/pm828/MAINTAINERS b/board/pm828/MAINTAINERS index 767a84d..97c1ccc 100644 --- a/board/pm828/MAINTAINERS +++ b/board/pm828/MAINTAINERS @@ -1,5 +1,5 @@ PM828 BOARD -M: - +#M: - S: Maintained F: board/pm828/ F: include/configs/PM828.h diff --git a/board/ppmc7xx/MAINTAINERS b/board/ppmc7xx/MAINTAINERS index 5b21aa7..a0c1f44 100644 --- a/board/ppmc7xx/MAINTAINERS +++ b/board/ppmc7xx/MAINTAINERS @@ -1,5 +1,5 @@ PPMC7XX BOARD -M: - +#M: - S: Maintained F: board/ppmc7xx/ F: include/configs/ppmc7xx.h diff --git a/board/ppmc8260/MAINTAINERS b/board/ppmc8260/MAINTAINERS index 768d092..8b896af 100644 --- a/board/ppmc8260/MAINTAINERS +++ b/board/ppmc8260/MAINTAINERS @@ -1,5 +1,5 @@ PPMC8260 BOARD -M: Brad Kemp <Brad.Kemp@seranoa.com> +#M: Brad Kemp <Brad.Kemp@seranoa.com> S: Orphan (since 2014-04) F: board/ppmc8260/ F: include/configs/ppmc8260.h diff --git a/board/qemu-mips/MAINTAINERS b/board/qemu-mips/MAINTAINERS index 079949a..334f9d8 100644 --- a/board/qemu-mips/MAINTAINERS +++ b/board/qemu-mips/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/qemu-mips.h F: configs/qemu_mips_defconfig QEMU_MIPSEL BOARD -M: - +#M: - S: Maintained F: configs/qemu_mipsel_defconfig F: include/configs/qemu-mips64.h diff --git a/board/renesas/MigoR/MAINTAINERS b/board/renesas/MigoR/MAINTAINERS index 9368b05..21ee5e2 100644 --- a/board/renesas/MigoR/MAINTAINERS +++ b/board/renesas/MigoR/MAINTAINERS @@ -1,5 +1,5 @@ MIGOR BOARD -M: - +#M: - S: Maintained F: board/renesas/MigoR/ F: include/configs/MigoR.h diff --git a/board/renesas/rsk7269/MAINTAINERS b/board/renesas/rsk7269/MAINTAINERS index d3c77c3..698fbdb 100644 --- a/board/renesas/rsk7269/MAINTAINERS +++ b/board/renesas/rsk7269/MAINTAINERS @@ -1,5 +1,5 @@ RSK7269 BOARD -M: - +#M: - S: Maintained F: board/renesas/rsk7269/ F: include/configs/rsk7269.h diff --git a/board/renesas/sh7752evb/MAINTAINERS b/board/renesas/sh7752evb/MAINTAINERS index 8910669..9840477 100644 --- a/board/renesas/sh7752evb/MAINTAINERS +++ b/board/renesas/sh7752evb/MAINTAINERS @@ -1,5 +1,5 @@ SH7752EVB BOARD -M: - +#M: - S: Maintained F: board/renesas/sh7752evb/ F: include/configs/sh7752evb.h diff --git a/board/renesas/sh7753evb/MAINTAINERS b/board/renesas/sh7753evb/MAINTAINERS index 03e6c8c..b6c85ee 100644 --- a/board/renesas/sh7753evb/MAINTAINERS +++ b/board/renesas/sh7753evb/MAINTAINERS @@ -1,5 +1,5 @@ SH7753EVB BOARD -M: - +#M: - S: Maintained F: board/renesas/sh7753evb/ F: include/configs/sh7753evb.h diff --git a/board/renesas/sh7757lcr/MAINTAINERS b/board/renesas/sh7757lcr/MAINTAINERS index bbdd6d0..20aca67 100644 --- a/board/renesas/sh7757lcr/MAINTAINERS +++ b/board/renesas/sh7757lcr/MAINTAINERS @@ -1,5 +1,5 @@ SH7757LCR BOARD -M: - +#M: - S: Maintained F: board/renesas/sh7757lcr/ F: include/configs/sh7757lcr.h diff --git a/board/renesas/sh7785lcr/MAINTAINERS b/board/renesas/sh7785lcr/MAINTAINERS index 0d99de6..17578e0 100644 --- a/board/renesas/sh7785lcr/MAINTAINERS +++ b/board/renesas/sh7785lcr/MAINTAINERS @@ -1,5 +1,5 @@ SH7785LCR BOARD -M: - +#M: - S: Maintained F: board/renesas/sh7785lcr/ F: include/configs/sh7785lcr.h diff --git a/board/sacsng/MAINTAINERS b/board/sacsng/MAINTAINERS index c2c8ee3..b76e462 100644 --- a/board/sacsng/MAINTAINERS +++ b/board/sacsng/MAINTAINERS @@ -1,5 +1,5 @@ SACSNG BOARD -M: Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com> +#M: Jerry Van Baren <gerald.vanbaren@smiths-aerospace.com> S: Orphan (since 2014-06) F: board/sacsng/ F: include/configs/sacsng.h diff --git a/board/sandburst/karef/MAINTAINERS b/board/sandburst/karef/MAINTAINERS index 4c29ae7..21510e8 100644 --- a/board/sandburst/karef/MAINTAINERS +++ b/board/sandburst/karef/MAINTAINERS @@ -1,5 +1,5 @@ KAREF BOARD -M: Travis Sawyer <travis.sawyer@sandburst.com> +#M: Travis Sawyer <travis.sawyer@sandburst.com> S: Orphan (since 2014-03) F: board/sandburst/karef/ F: include/configs/KAREF.h diff --git a/board/sandburst/metrobox/MAINTAINERS b/board/sandburst/metrobox/MAINTAINERS index f5734ba..71d18f9 100644 --- a/board/sandburst/metrobox/MAINTAINERS +++ b/board/sandburst/metrobox/MAINTAINERS @@ -1,5 +1,5 @@ METROBOX BOARD -M: Travis Sawyer <travis.sawyer@sandburst.com> +#M: Travis Sawyer <travis.sawyer@sandburst.com> S: Orphan (since 2014-03) F: board/sandburst/metrobox/ F: include/configs/METROBOX.h diff --git a/board/sandpoint/MAINTAINERS b/board/sandpoint/MAINTAINERS index f28c309..569cf42 100644 --- a/board/sandpoint/MAINTAINERS +++ b/board/sandpoint/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/Sandpoint8240.h F: configs/Sandpoint8240_defconfig SANDPOINT8245 BOARD -M: Jim Thompson <jim@musenki.com> +#M: Jim Thompson <jim@musenki.com> S: Orphan (since 2014-04) F: include/configs/Sandpoint8245.h F: configs/Sandpoint8245_defconfig diff --git a/board/sbc405/MAINTAINERS b/board/sbc405/MAINTAINERS index dbb4451..2abad25 100644 --- a/board/sbc405/MAINTAINERS +++ b/board/sbc405/MAINTAINERS @@ -1,5 +1,5 @@ SBC405 BOARD -M: - +#M: - S: Maintained F: board/sbc405/ F: include/configs/sbc405.h diff --git a/board/socrates/MAINTAINERS b/board/socrates/MAINTAINERS index fc3e11d..293b8e6 100644 --- a/board/socrates/MAINTAINERS +++ b/board/socrates/MAINTAINERS @@ -1,5 +1,5 @@ SOCRATES BOARD -M: - +#M: - S: Maintained F: board/socrates/ F: include/configs/socrates.h diff --git a/board/spear/spear300/MAINTAINERS b/board/spear/spear300/MAINTAINERS index 15164fe..07152ae 100644 --- a/board/spear/spear300/MAINTAINERS +++ b/board/spear/spear300/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/spear3xx_evb.h F: configs/spear300_defconfig SPEAR300_NAND BOARD -M: - +#M: - S: Maintained F: configs/spear300_nand_defconfig F: configs/spear300_usbtty_defconfig diff --git a/board/spear/spear310/MAINTAINERS b/board/spear/spear310/MAINTAINERS index 3a7e610..4f9aa15 100644 --- a/board/spear/spear310/MAINTAINERS +++ b/board/spear/spear310/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/spear3xx_evb.h F: configs/spear310_defconfig SPEAR310_NAND BOARD -M: - +#M: - S: Maintained F: configs/spear310_nand_defconfig F: configs/spear310_pnor_defconfig diff --git a/board/spear/spear320/MAINTAINERS b/board/spear/spear320/MAINTAINERS index 414beca..bf78092 100644 --- a/board/spear/spear320/MAINTAINERS +++ b/board/spear/spear320/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/spear3xx_evb.h F: configs/spear320_defconfig SPEAR320_NAND BOARD -M: - +#M: - S: Maintained F: configs/spear320_nand_defconfig F: configs/spear320_pnor_defconfig diff --git a/board/spear/spear600/MAINTAINERS b/board/spear/spear600/MAINTAINERS index a978fdd..ddcd11a 100644 --- a/board/spear/spear600/MAINTAINERS +++ b/board/spear/spear600/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/spear6xx_evb.h F: configs/spear600_defconfig SPEAR600_NAND BOARD -M: - +#M: - S: Maintained F: configs/spear600_nand_defconfig F: configs/spear600_usbtty_defconfig diff --git a/board/st-ericsson/u8500/MAINTAINERS b/board/st-ericsson/u8500/MAINTAINERS index 54e7921..e2581eb 100644 --- a/board/st-ericsson/u8500/MAINTAINERS +++ b/board/st-ericsson/u8500/MAINTAINERS @@ -1,5 +1,5 @@ U8500 BOARD -M: - +#M: - S: Maintained F: board/st-ericsson/u8500/ F: include/configs/u8500_href.h diff --git a/board/stx/stxgp3/MAINTAINERS b/board/stx/stxgp3/MAINTAINERS index 6f485d4..bd5743c 100644 --- a/board/stx/stxgp3/MAINTAINERS +++ b/board/stx/stxgp3/MAINTAINERS @@ -1,5 +1,5 @@ STXGP3 BOARD -M: Dan Malek <dan@embeddedalley.com> +#M: Dan Malek <dan@embeddedalley.com> S: Orphan (since 2014-06) F: board/stx/stxgp3/ F: include/configs/stxgp3.h diff --git a/board/stx/stxssa/MAINTAINERS b/board/stx/stxssa/MAINTAINERS index f56adf0..b7cc89b 100644 --- a/board/stx/stxssa/MAINTAINERS +++ b/board/stx/stxssa/MAINTAINERS @@ -1,5 +1,5 @@ STXSSA BOARD -M: Dan Malek <dan@embeddedalley.com> +#M: Dan Malek <dan@embeddedalley.com> S: Orphan (since 2014-06) F: board/stx/stxssa/ F: include/configs/stxssa.h diff --git a/board/tcm-bf518/MAINTAINERS b/board/tcm-bf518/MAINTAINERS index f649b06..1690122 100644 --- a/board/tcm-bf518/MAINTAINERS +++ b/board/tcm-bf518/MAINTAINERS @@ -1,5 +1,5 @@ TCM-BF518 BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/tcm-bf518/ F: include/configs/tcm-bf518.h diff --git a/board/tcm-bf537/MAINTAINERS b/board/tcm-bf537/MAINTAINERS index 9ee557d..1cd4845 100644 --- a/board/tcm-bf537/MAINTAINERS +++ b/board/tcm-bf537/MAINTAINERS @@ -1,5 +1,5 @@ TCM-BF537 BOARD -M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> +#M: Bluetechnix Tinyboards <bluetechnix@blackfin.uclinux.org> S: Orphan (since 2014-03) F: board/tcm-bf537/ F: include/configs/tcm-bf537.h diff --git a/board/ti/evm/MAINTAINERS b/board/ti/evm/MAINTAINERS index b2ebadc..d0b2788 100644 --- a/board/ti/evm/MAINTAINERS +++ b/board/ti/evm/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/omap3_evm.h F: configs/omap3_evm_defconfig OMAP3_EVM_QUICK_MMC BOARD -M: - +#M: - S: Maintained F: include/configs/omap3_evm_quick_mmc.h F: configs/omap3_evm_quick_mmc_defconfig diff --git a/board/ti/ti816x/MAINTAINERS b/board/ti/ti816x/MAINTAINERS index 8bf6122..d3de144 100644 --- a/board/ti/ti816x/MAINTAINERS +++ b/board/ti/ti816x/MAINTAINERS @@ -1,5 +1,5 @@ TI816X BOARD -M: - +#M: - S: Maintained F: board/ti/ti816x/ F: include/configs/ti816x_evm.h diff --git a/board/ti/tnetv107xevm/MAINTAINERS b/board/ti/tnetv107xevm/MAINTAINERS index 76ccfdc..8a92c6b 100644 --- a/board/ti/tnetv107xevm/MAINTAINERS +++ b/board/ti/tnetv107xevm/MAINTAINERS @@ -1,5 +1,5 @@ TNETV107XEVM BOARD -M: Chan-Taek Park <c-park@ti.com> +#M: Chan-Taek Park <c-park@ti.com> S: Orphan (since 2014-06) F: board/ti/tnetv107xevm/ F: include/configs/tnetv107x_evm.h diff --git a/board/total5200/MAINTAINERS b/board/total5200/MAINTAINERS index 983b96d..afb0058 100644 --- a/board/total5200/MAINTAINERS +++ b/board/total5200/MAINTAINERS @@ -1,5 +1,5 @@ TOTAL5200 BOARD -M: - +#M: - S: Maintained F: board/total5200/ F: include/configs/Total5200.h diff --git a/board/tqc/tqm5200/MAINTAINERS b/board/tqc/tqm5200/MAINTAINERS index 581ef95..d3eb543 100644 --- a/board/tqc/tqm5200/MAINTAINERS +++ b/board/tqc/tqm5200/MAINTAINERS @@ -1,5 +1,5 @@ TQM5200 BOARD -M: - +#M: - S: Maintained F: board/tqc/tqm5200/ F: include/configs/aev.h diff --git a/board/tqc/tqm8272/MAINTAINERS b/board/tqc/tqm8272/MAINTAINERS index a660de1..988d2b1 100644 --- a/board/tqc/tqm8272/MAINTAINERS +++ b/board/tqc/tqm8272/MAINTAINERS @@ -1,5 +1,5 @@ TQM8272 BOARD -M: - +#M: - S: Maintained F: board/tqc/tqm8272/ F: include/configs/TQM8272.h diff --git a/board/tqc/tqm834x/MAINTAINERS b/board/tqc/tqm834x/MAINTAINERS index 10c14f3..543ab1b 100644 --- a/board/tqc/tqm834x/MAINTAINERS +++ b/board/tqc/tqm834x/MAINTAINERS @@ -1,5 +1,5 @@ TQM834X BOARD -M: - +#M: - S: Maintained F: board/tqc/tqm834x/ F: include/configs/TQM834x.h diff --git a/board/tqc/tqm8xx/MAINTAINERS b/board/tqc/tqm8xx/MAINTAINERS index 161fa68..fe4a212 100644 --- a/board/tqc/tqm8xx/MAINTAINERS +++ b/board/tqc/tqm8xx/MAINTAINERS @@ -39,7 +39,7 @@ F: configs/virtlab2_defconfig F: configs/wtk_defconfig NSCU BOARD -M: - +#M: - S: Maintained F: include/configs/NSCU.h F: configs/NSCU_defconfig diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c index b4d3994..b5249e7 100644 --- a/board/ttcontrol/vision2/vision2.c +++ b/board/ttcontrol/vision2/vision2.c @@ -144,6 +144,11 @@ static void setup_uart(void) } #ifdef CONFIG_MXC_SPI +int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return (bus == 0 && cs == 1) ? 121 : -1; +} + void spi_io_init(void) { static const iomux_v3_cfg_t spi_pads[] = { diff --git a/board/v38b/MAINTAINERS b/board/v38b/MAINTAINERS index 1b12d0b..d1a6ae6 100644 --- a/board/v38b/MAINTAINERS +++ b/board/v38b/MAINTAINERS @@ -1,5 +1,5 @@ V38B BOARD -M: - +#M: - S: Maintained F: board/v38b/ F: include/configs/v38b.h diff --git a/board/woodburn/MAINTAINERS b/board/woodburn/MAINTAINERS index 715f2ca..4fbf6bb 100644 --- a/board/woodburn/MAINTAINERS +++ b/board/woodburn/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/woodburn.h F: configs/woodburn_defconfig WOODBURN_SD BOARD -M: - +#M: - S: Maintained F: include/configs/woodburn_sd.h F: configs/woodburn_sd_defconfig diff --git a/board/xaeniax/MAINTAINERS b/board/xaeniax/MAINTAINERS index f2fa4bf..44bb588 100644 --- a/board/xaeniax/MAINTAINERS +++ b/board/xaeniax/MAINTAINERS @@ -1,5 +1,5 @@ XAENIAX BOARD -M: - +#M: - S: Maintained F: board/xaeniax/ F: include/configs/xaeniax.h diff --git a/board/xes/xpedite517x/MAINTAINERS b/board/xes/xpedite517x/MAINTAINERS index c74fdf4..035cb14 100644 --- a/board/xes/xpedite517x/MAINTAINERS +++ b/board/xes/xpedite517x/MAINTAINERS @@ -1,5 +1,5 @@ XPEDITE517X BOARD -M: - +#M: - S: Maintained F: board/xes/xpedite517x/ F: include/configs/xpedite517x.h diff --git a/board/xes/xpedite520x/MAINTAINERS b/board/xes/xpedite520x/MAINTAINERS index 7f9bf9a..2fd4ac0 100644 --- a/board/xes/xpedite520x/MAINTAINERS +++ b/board/xes/xpedite520x/MAINTAINERS @@ -1,5 +1,5 @@ XPEDITE520X BOARD -M: - +#M: - S: Maintained F: board/xes/xpedite520x/ F: include/configs/xpedite520x.h diff --git a/board/xes/xpedite537x/MAINTAINERS b/board/xes/xpedite537x/MAINTAINERS index a13dcf1..45a420d 100644 --- a/board/xes/xpedite537x/MAINTAINERS +++ b/board/xes/xpedite537x/MAINTAINERS @@ -1,5 +1,5 @@ XPEDITE537X BOARD -M: - +#M: - S: Maintained F: board/xes/xpedite537x/ F: include/configs/xpedite537x.h diff --git a/board/xes/xpedite550x/MAINTAINERS b/board/xes/xpedite550x/MAINTAINERS index 12d321e..b22f0e6 100644 --- a/board/xes/xpedite550x/MAINTAINERS +++ b/board/xes/xpedite550x/MAINTAINERS @@ -1,5 +1,5 @@ XPEDITE550X BOARD -M: - +#M: - S: Maintained F: board/xes/xpedite550x/ F: include/configs/xpedite550x.h diff --git a/common/Kconfig b/common/Kconfig new file mode 100644 index 0000000..216a8de --- /dev/null +++ b/common/Kconfig @@ -0,0 +1,34 @@ +menu "Command line interface" + depends on !SPL_BUILD + +config CMD_BOOTM + bool "Enable bootm command" + default y + help + Boot an application image from the memory. + +config CMD_CRC32 + bool "Enable crc32 command" + default y + help + Compute CRC32. + +config CMD_EXPORTENV + bool "Enable env export command" + default y + help + Export environments. + +config CMD_IMPORTENV + bool "Enable env import command" + default y + help + Import environments. + +config CMD_GO + bool "Enable go command" + default y + help + Start an application at a given address. + +endmenu diff --git a/common/Makefile b/common/Makefile index aca0f7f..b19d379 100644 --- a/common/Makefile +++ b/common/Makefile @@ -243,13 +243,8 @@ obj-y += cmd_nvedit.o #environment obj-y += env_common.o #others -ifdef CONFIG_DDR_SPD -SPD := y -endif -ifdef CONFIG_SPD_EEPROM -SPD := y -endif -obj-$(SPD) += ddr_spd.o +obj-$(CONFIG_DDR_SPD) += ddr_spd.o +obj-$(CONFIG_SPD_EEPROM) += ddr_spd.o obj-$(CONFIG_HWCONFIG) += hwconfig.o obj-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o obj-y += console.o @@ -264,4 +259,10 @@ obj-$(CONFIG_IO_TRACE) += iotrace.o obj-y += memsize.o obj-y += stdio.o +# This option is not just y/n - it can have a numeric value +ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV +obj-y += aboot.o +obj-y += fb_mmc.o +endif + CFLAGS_env_embedded.o := -Wa,--no-warn -DENV_CRC=$(shell tools/envcrc 2>/dev/null) diff --git a/common/cmd_fastboot.c b/common/cmd_fastboot.c index 83fa7bd..909616d 100644 --- a/common/cmd_fastboot.c +++ b/common/cmd_fastboot.c @@ -30,7 +30,8 @@ static int do_fastboot(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) } U_BOOT_CMD( - fastboot, 1, 1, do_fastboot, - "fastboot - enter USB Fastboot protocol", - "" + fastboot, 1, 0, do_fastboot, + "use USB Fastboot protocol", + "\n" + " - run as a fastboot usb device" ); diff --git a/common/cmd_nand.c b/common/cmd_nand.c index f9ced9d..7f962dc 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -647,8 +647,6 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */ printf("\nNAND %s: ", read ? "read" : "write"); - nand = &nand_info[dev]; - s = strchr(cmd, '.'); if (s && !strcmp(s, ".raw")) { @@ -657,6 +655,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (arg_off(argv[3], &dev, &off, &size, &maxsize)) return 1; + nand = &nand_info[dev]; + if (argc > 4 && !str2long(argv[4], &pagecount)) { printf("'%s' is not a number\n", argv[4]); return 1; @@ -679,6 +679,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) rwsize = size; } + nand = &nand_info[dev]; + if (!s || !strcmp(s, ".jffs2") || !strcmp(s, ".e") || !strcmp(s, ".i")) { if (read) diff --git a/common/cmd_sf.c b/common/cmd_sf.c index b4ceb71..c60e8d1 100644 --- a/common/cmd_sf.c +++ b/common/cmd_sf.c @@ -13,19 +13,6 @@ #include <asm/io.h> -#ifndef CONFIG_SF_DEFAULT_SPEED -# define CONFIG_SF_DEFAULT_SPEED 1000000 -#endif -#ifndef CONFIG_SF_DEFAULT_MODE -# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 -#endif -#ifndef CONFIG_SF_DEFAULT_CS -# define CONFIG_SF_DEFAULT_CS 0 -#endif -#ifndef CONFIG_SF_DEFAULT_BUS -# define CONFIG_SF_DEFAULT_BUS 0 -#endif - static struct spi_flash *flash; diff --git a/common/console.c b/common/console.c index 898da39..5a2f411 100644 --- a/common/console.c +++ b/common/console.c @@ -524,6 +524,7 @@ static int ctrlc_disabled = 0; /* see disable_ctrl() */ static int ctrlc_was_pressed = 0; int ctrlc(void) { +#ifndef CONFIG_SANDBOX if (!ctrlc_disabled && gd->have_console) { if (tstc()) { switch (getc()) { @@ -535,6 +536,8 @@ int ctrlc(void) } } } +#endif + return 0; } /* Reads user's confirmation. diff --git a/common/fb_mmc.c b/common/fb_mmc.c new file mode 100644 index 0000000..fb06d8a --- /dev/null +++ b/common/fb_mmc.c @@ -0,0 +1,92 @@ +/* + * Copyright 2014 Broadcom Corporation. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <fb_mmc.h> +#include <part.h> +#include <aboot.h> +#include <sparse_format.h> + +/* The 64 defined bytes plus the '\0' */ +#define RESPONSE_LEN (64 + 1) + +static char *response_str; + +void fastboot_fail(const char *s) +{ + strncpy(response_str, "FAIL", 4); + strncat(response_str, s, RESPONSE_LEN - 4 - 1); +} + +void fastboot_okay(const char *s) +{ + strncpy(response_str, "OKAY", 4); + strncat(response_str, s, RESPONSE_LEN - 4 - 1); +} + +static void write_raw_image(block_dev_desc_t *dev_desc, disk_partition_t *info, + const char *part_name, void *buffer, + unsigned int download_bytes) +{ + lbaint_t blkcnt; + lbaint_t blks; + + /* determine number of blocks to write */ + blkcnt = ((download_bytes + (info->blksz - 1)) & ~(info->blksz - 1)); + blkcnt = blkcnt / info->blksz; + + if (blkcnt > info->size) { + error("too large for partition: '%s'\n", part_name); + fastboot_fail("too large for partition"); + return; + } + + puts("Flashing Raw Image\n"); + + blks = dev_desc->block_write(dev_desc->dev, info->start, blkcnt, + buffer); + if (blks != blkcnt) { + error("failed writing to device %d\n", dev_desc->dev); + fastboot_fail("failed writing to device"); + return; + } + + printf("........ wrote " LBAFU " bytes to '%s'\n", blkcnt * info->blksz, + part_name); + fastboot_okay(""); +} + +void fb_mmc_flash_write(const char *cmd, void *download_buffer, + unsigned int download_bytes, char *response) +{ + int ret; + block_dev_desc_t *dev_desc; + disk_partition_t info; + + /* initialize the response buffer */ + response_str = response; + + dev_desc = get_dev("mmc", CONFIG_FASTBOOT_FLASH_MMC_DEV); + if (!dev_desc || dev_desc->type == DEV_TYPE_UNKNOWN) { + error("invalid mmc device\n"); + fastboot_fail("invalid mmc device"); + return; + } + + ret = get_partition_info_efi_by_name(dev_desc, cmd, &info); + if (ret) { + error("cannot find partition: '%s'\n", cmd); + fastboot_fail("cannot find partition"); + return; + } + + if (is_sparse_image(download_buffer)) + write_sparse_image(dev_desc, &info, cmd, download_buffer, + download_bytes); + else + write_raw_image(dev_desc, &info, cmd, download_buffer, + download_bytes); +} @@ -53,6 +53,10 @@ ifdef BOARD sinclude $(srctree)/board/$(BOARDDIR)/config.mk # include board specific rules endif +ifdef FTRACE +PLATFORM_CPPFLAGS += -finstrument-functions -DFTRACE +endif + ######################################################################### RELFLAGS := $(PLATFORM_RELFLAGS) diff --git a/configs/T1042RDB_defconfig b/configs/T1042RDB_defconfig new file mode 100644 index 0000000..85eceb9 --- /dev/null +++ b/configs/T1042RDB_defconfig @@ -0,0 +1,4 @@ +CONFIG_SYS_EXTRA_OPTIONS="PPC_T1042,T1042RDB" +CONFIG_PPC=y +CONFIG_MPC85xx=y +CONFIG_TARGET_T104XRDB=y diff --git a/configs/am335x_boneblack_vboot_defconfig b/configs/am335x_boneblack_vboot_defconfig index 00317c4..e257143 100644 --- a/configs/am335x_boneblack_vboot_defconfig +++ b/configs/am335x_boneblack_vboot_defconfig @@ -2,3 +2,5 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT,ENABLE_VBOOT" +S:CONFIG_ARM=y +S:CONFIG_TARGET_AM335X_EVM=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="am335x-boneblack" diff --git a/configs/arndale_defconfig b/configs/arndale_defconfig index 7ea5c0d..fc30508 100644 --- a/configs/arndale_defconfig +++ b/configs/arndale_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_EXYNOS=y +S:CONFIG_TARGET_ARNDALE=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5250-arndale" diff --git a/configs/bct-brettl2_defconfig b/configs/bct-brettl2_defconfig index 3676306..26b145d 100644 --- a/configs/bct-brettl2_defconfig +++ b/configs/bct-brettl2_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BCT_BRETTL2=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/beaver_defconfig b/configs/beaver_defconfig index 7c9d94b..ab615a8 100644 --- a/configs/beaver_defconfig +++ b/configs/beaver_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA30=y +S:CONFIG_TARGET_BEAVER=y +CONFIG_DEFAULT_DEVICE_TREE="tegra30-beaver" diff --git a/configs/bf506f-ezkit_defconfig b/configs/bf506f-ezkit_defconfig index f81f412..f164e06 100644 --- a/configs/bf506f-ezkit_defconfig +++ b/configs/bf506f-ezkit_defconfig @@ -1,2 +1,5 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF506F_EZKIT=y +# CONFIG_CMD_BOOTM is not set +# CONFIG_CMD_EXPORTENV is not set +# CONFIG_CMD_IMPORTENV is not set diff --git a/configs/bf518f-ezbrd_defconfig b/configs/bf518f-ezbrd_defconfig index a93eed0..fb35ad0 100644 --- a/configs/bf518f-ezbrd_defconfig +++ b/configs/bf518f-ezbrd_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF518F_EZBRD=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf526-ezbrd_defconfig b/configs/bf526-ezbrd_defconfig index 4a45223..da06d3a 100644 --- a/configs/bf526-ezbrd_defconfig +++ b/configs/bf526-ezbrd_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF526_EZBRD=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf527-ad7160-eval_defconfig b/configs/bf527-ad7160-eval_defconfig index d9db715..47f53c9 100644 --- a/configs/bf527-ad7160-eval_defconfig +++ b/configs/bf527-ad7160-eval_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_AD7160_EVAL=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf527-ezkit-v2_defconfig b/configs/bf527-ezkit-v2_defconfig index aedbb96..e250e10 100644 --- a/configs/bf527-ezkit-v2_defconfig +++ b/configs/bf527-ezkit-v2_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="BF527_EZKIT_REV_2_1" CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_EZKIT=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf527-ezkit_defconfig b/configs/bf527-ezkit_defconfig index 3ed77a6..69f6ef7 100644 --- a/configs/bf527-ezkit_defconfig +++ b/configs/bf527-ezkit_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_EZKIT=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf527-sdp_defconfig b/configs/bf527-sdp_defconfig index 0f8c28c..57f47e9 100644 --- a/configs/bf527-sdp_defconfig +++ b/configs/bf527-sdp_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF527_SDP=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf533-ezkit_defconfig b/configs/bf533-ezkit_defconfig index 217d4c3..57f8da1 100644 --- a/configs/bf533-ezkit_defconfig +++ b/configs/bf533-ezkit_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF533_EZKIT=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf533-stamp_defconfig b/configs/bf533-stamp_defconfig index a99b3c7..1bcf3d3 100644 --- a/configs/bf533-stamp_defconfig +++ b/configs/bf533-stamp_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF533_STAMP=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf537-stamp_defconfig b/configs/bf537-stamp_defconfig index d9daf7e..9b9a92f 100644 --- a/configs/bf537-stamp_defconfig +++ b/configs/bf537-stamp_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF537_STAMP=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf538f-ezkit_defconfig b/configs/bf538f-ezkit_defconfig index 0507cb2..1892151 100644 --- a/configs/bf538f-ezkit_defconfig +++ b/configs/bf538f-ezkit_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF538F_EZKIT=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf548-ezkit_defconfig b/configs/bf548-ezkit_defconfig index 7bb4064..5236984 100644 --- a/configs/bf548-ezkit_defconfig +++ b/configs/bf548-ezkit_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF548_EZKIT=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf561-acvilon_defconfig b/configs/bf561-acvilon_defconfig index ba8a418..098f31f 100644 --- a/configs/bf561-acvilon_defconfig +++ b/configs/bf561-acvilon_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF561_ACVILON=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/bf561-ezkit_defconfig b/configs/bf561-ezkit_defconfig index 7ceb1d9..5665288 100644 --- a/configs/bf561-ezkit_defconfig +++ b/configs/bf561-ezkit_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BF561_EZKIT=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/br4_defconfig b/configs/br4_defconfig index 9d91933..5655d54 100644 --- a/configs/br4_defconfig +++ b/configs/br4_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_BR4=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cardhu_defconfig b/configs/cardhu_defconfig index bb042b4..4466e98 100644 --- a/configs/cardhu_defconfig +++ b/configs/cardhu_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA30=y +S:CONFIG_TARGET_CARDHU=y +CONFIG_DEFAULT_DEVICE_TREE="tegra30-cardhu" diff --git a/configs/cm-bf527_defconfig b/configs/cm-bf527_defconfig index cb5110c..a6830b5 100644 --- a/configs/cm-bf527_defconfig +++ b/configs/cm-bf527_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF527=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cm-bf533_defconfig b/configs/cm-bf533_defconfig index aa38d0e..b9508ae 100644 --- a/configs/cm-bf533_defconfig +++ b/configs/cm-bf533_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF533=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cm-bf537e_defconfig b/configs/cm-bf537e_defconfig index b9deaae..a44eab7 100644 --- a/configs/cm-bf537e_defconfig +++ b/configs/cm-bf537e_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF537E=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cm-bf537u_defconfig b/configs/cm-bf537u_defconfig index 16f7ae1..29c33b9 100644 --- a/configs/cm-bf537u_defconfig +++ b/configs/cm-bf537u_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF537U=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cm-bf548_defconfig b/configs/cm-bf548_defconfig index e60306a..525f2e7 100644 --- a/configs/cm-bf548_defconfig +++ b/configs/cm-bf548_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF548=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/cm-bf561_defconfig b/configs/cm-bf561_defconfig index 1b9301c..062bfeb 100644 --- a/configs/cm-bf561_defconfig +++ b/configs/cm-bf561_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_CM_BF561=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/colibri_t20_iris_defconfig b/configs/colibri_t20_iris_defconfig index b2a21e1..b76f78b 100644 --- a/configs/colibri_t20_iris_defconfig +++ b/configs/colibri_t20_iris_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_COLIBRI_T20_IRIS=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-colibri_t20_iris" diff --git a/configs/colibri_t30_defconfig b/configs/colibri_t30_defconfig index abb41f3..b955303 100644 --- a/configs/colibri_t30_defconfig +++ b/configs/colibri_t30_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA30=y +S:CONFIG_TARGET_COLIBRI_T30=y +CONFIG_DEFAULT_DEVICE_TREE="tegra30-colibri" diff --git a/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig b/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig index be1a371..c8695ab 100644 --- a/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig +++ b/configs/controlcenterd_TRAILBLAZER_DEVELOP_defconfig @@ -2,3 +2,4 @@ CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH,DEVELOP" CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_CONTROLCENTERD=y +# CONFIG_CMD_BOOTM is not set diff --git a/configs/controlcenterd_TRAILBLAZER_defconfig b/configs/controlcenterd_TRAILBLAZER_defconfig index ab548a6..730b96e 100644 --- a/configs/controlcenterd_TRAILBLAZER_defconfig +++ b/configs/controlcenterd_TRAILBLAZER_defconfig @@ -2,3 +2,4 @@ CONFIG_SYS_EXTRA_OPTIONS="TRAILBLAZER,SPIFLASH" CONFIG_PPC=y CONFIG_MPC85xx=y CONFIG_TARGET_CONTROLCENTERD=y +# CONFIG_CMD_BOOTM is not set diff --git a/configs/coreboot-x86_defconfig b/configs/coreboot-x86_defconfig index a06c527..6249db7 100644 --- a/configs/coreboot-x86_defconfig +++ b/configs/coreboot-x86_defconfig @@ -1,3 +1,5 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x01110000" CONFIG_X86=y CONFIG_TARGET_COREBOOT=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="link" diff --git a/configs/dalmore_defconfig b/configs/dalmore_defconfig index 70677aa..f704c75 100644 --- a/configs/dalmore_defconfig +++ b/configs/dalmore_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA114=y +S:CONFIG_TARGET_DALMORE=y +CONFIG_DEFAULT_DEVICE_TREE="tegra114-dalmore" diff --git a/configs/harmony_defconfig b/configs/harmony_defconfig index a52231b..d99b429 100644 --- a/configs/harmony_defconfig +++ b/configs/harmony_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_HARMONY=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-harmony" diff --git a/configs/ip04_defconfig b/configs/ip04_defconfig index 4f9895a..ba737ae 100644 --- a/configs/ip04_defconfig +++ b/configs/ip04_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_IP04=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/jetson-tk1_defconfig b/configs/jetson-tk1_defconfig index 00eac92..ef1d41c 100644 --- a/configs/jetson-tk1_defconfig +++ b/configs/jetson-tk1_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA124=y +S:CONFIG_TARGET_JETSON_TK1=y +CONFIG_DEFAULT_DEVICE_TREE="tegra124-jetson-tk1" diff --git a/configs/kwb_defconfig b/configs/kwb_defconfig index 5082ff7..106a24f 100644 --- a/configs/kwb_defconfig +++ b/configs/kwb_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1" +S:CONFIG_ARM=y +S:CONFIG_TARGET_KWB=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/medcom-wide_defconfig b/configs/medcom-wide_defconfig index e9a3930..35963e9 100644 --- a/configs/medcom-wide_defconfig +++ b/configs/medcom-wide_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_MEDCOM_WIDE=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-medcom-wide" diff --git a/configs/microblaze-generic_defconfig b/configs/microblaze-generic_defconfig index 7f23786..5cfd596 100644 --- a/configs/microblaze-generic_defconfig +++ b/configs/microblaze-generic_defconfig @@ -1,3 +1,6 @@ CONFIG_SPL=y +S:CONFIG_MICROBLAZE=y +S:CONFIG_TARGET_MICROBLAZE_GENERIC=y +CONFIG_OF_CONTROL=y +CONFIG_OF_EMBED=y +CONFIG_DEFAULT_DEVICE_TREE="microblaze-generic" diff --git a/configs/odroid_defconfig b/configs/odroid_defconfig index a1c7ac5..a842837 100644 --- a/configs/odroid_defconfig +++ b/configs/odroid_defconfig @@ -1,3 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_ODROID=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="exynos4412-odroid" diff --git a/configs/origen_defconfig b/configs/origen_defconfig index aa92381..2a7f83b 100644 --- a/configs/origen_defconfig +++ b/configs/origen_defconfig @@ -2,3 +2,5 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_EXYNOS=y +S:CONFIG_TARGET_ORIGEN=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="exynos4210-origen" diff --git a/configs/paz00_defconfig b/configs/paz00_defconfig index 05974eb..d2d36a5 100644 --- a/configs/paz00_defconfig +++ b/configs/paz00_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_PAZ00=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-paz00" diff --git a/configs/peach-pit_defconfig b/configs/peach-pit_defconfig index 797d5e0..b944b3b 100644 --- a/configs/peach-pit_defconfig +++ b/configs/peach-pit_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_EXYNOS=y +S:CONFIG_TARGET_PEACH_PIT=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5420-peach-pit" diff --git a/configs/plutux_defconfig b/configs/plutux_defconfig index 60e80ff..d2743b8 100644 --- a/configs/plutux_defconfig +++ b/configs/plutux_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_PLUTUX=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-plutux" diff --git a/configs/pr1_defconfig b/configs/pr1_defconfig index a8784c1..793a4e8 100644 --- a/configs/pr1_defconfig +++ b/configs/pr1_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_PR1=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/s5pc210_universal_defconfig b/configs/s5pc210_universal_defconfig index a9a3446..cdce39f 100644 --- a/configs/s5pc210_universal_defconfig +++ b/configs/s5pc210_universal_defconfig @@ -1,3 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_S5PC210_UNIVERSAL=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="exynos4210-universal_c210" diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index e69de29..47d8400 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -0,0 +1,3 @@ +CONFIG_OF_CONTROL=y +CONFIG_OF_HOSTFILE=y +CONFIG_DEFAULT_DEVICE_TREE="sandbox" diff --git a/configs/seaboard_defconfig b/configs/seaboard_defconfig index 516e760..ddf2cd6 100644 --- a/configs/seaboard_defconfig +++ b/configs/seaboard_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_SEABOARD=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-seaboard" diff --git a/configs/smdk5250_defconfig b/configs/smdk5250_defconfig index 465a75a..9b76d0d 100644 --- a/configs/smdk5250_defconfig +++ b/configs/smdk5250_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_EXYNOS=y +S:CONFIG_TARGET_SMDK5250=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5250-smdk5250" diff --git a/configs/smdk5420_defconfig b/configs/smdk5420_defconfig index 9dc43f2..8cf673d 100644 --- a/configs/smdk5420_defconfig +++ b/configs/smdk5420_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_EXYNOS=y +S:CONFIG_TARGET_SMDK5420=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5420-smdk5420" diff --git a/configs/snow_defconfig b/configs/snow_defconfig index 2d59046..14ed793 100644 --- a/configs/snow_defconfig +++ b/configs/snow_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ARCH_EXYNOS=y +S:CONFIG_TARGET_SNOW=y +CONFIG_DEFAULT_DEVICE_TREE="exynos5250-snow" diff --git a/configs/tcm-bf518_defconfig b/configs/tcm-bf518_defconfig index a9d5da0..0c9ae4d 100644 --- a/configs/tcm-bf518_defconfig +++ b/configs/tcm-bf518_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_TCM_BF518=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/tcm-bf537_defconfig b/configs/tcm-bf537_defconfig index fe9de13..6d604b6 100644 --- a/configs/tcm-bf537_defconfig +++ b/configs/tcm-bf537_defconfig @@ -1,2 +1,3 @@ CONFIG_BLACKFIN=y CONFIG_TARGET_TCM_BF537=y +CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED=y diff --git a/configs/tec-ng_defconfig b/configs/tec-ng_defconfig index e4a31cc..fabd34a 100644 --- a/configs/tec-ng_defconfig +++ b/configs/tec-ng_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA30=y +S:CONFIG_TARGET_TEC_NG=y +CONFIG_DEFAULT_DEVICE_TREE="tegra30-tec-ng" diff --git a/configs/tec_defconfig b/configs/tec_defconfig index 62a9542..d3cafa7 100644 --- a/configs/tec_defconfig +++ b/configs/tec_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_TEC=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-tec" diff --git a/configs/trats2_defconfig b/configs/trats2_defconfig index fa82724..1b98b73 100644 --- a/configs/trats2_defconfig +++ b/configs/trats2_defconfig @@ -1,3 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_TRATS2=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="exynos4412-trats2" diff --git a/configs/trats_defconfig b/configs/trats_defconfig index f888a51..901a014 100644 --- a/configs/trats_defconfig +++ b/configs/trats_defconfig @@ -1,3 +1,5 @@ CONFIG_ARM=y CONFIG_ARCH_EXYNOS=y CONFIG_TARGET_TRATS=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="exynos4210-trats" diff --git a/configs/trimslice_defconfig b/configs/trimslice_defconfig index 94f23e3..0b2a6d0 100644 --- a/configs/trimslice_defconfig +++ b/configs/trimslice_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_TRIMSLICE=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-trimslice" diff --git a/configs/tseries_mmc_defconfig b/configs/tseries_mmc_defconfig index ea70705..6eda869 100644 --- a/configs/tseries_mmc_defconfig +++ b/configs/tseries_mmc_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,EMMC_BOOT" +S:CONFIG_ARM=y +S:CONFIG_TARGET_TSERIES=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/tseries_nand_defconfig b/configs/tseries_nand_defconfig index 599d52c..bd06d83 100644 --- a/configs/tseries_nand_defconfig +++ b/configs/tseries_nand_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND" +S:CONFIG_ARM=y +S:CONFIG_TARGET_TSERIES=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/tseries_spi_defconfig b/configs/tseries_spi_defconfig index 7e57020..32ccc4e 100644 --- a/configs/tseries_spi_defconfig +++ b/configs/tseries_spi_defconfig @@ -2,3 +2,4 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT" +S:CONFIG_ARM=y +S:CONFIG_TARGET_TSERIES=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_platinum_onenand_small_defconfig b/configs/vct_platinum_onenand_small_defconfig index f7b3a91..58c7995 100644 --- a/configs/vct_platinum_onenand_small_defconfig +++ b/configs/vct_platinum_onenand_small_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUM,VCT_ONENAND,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_platinum_small_defconfig b/configs/vct_platinum_small_defconfig index 15eef48..f4f56c4 100644 --- a/configs/vct_platinum_small_defconfig +++ b/configs/vct_platinum_small_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUM,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_platinumavc_onenand_small_defconfig b/configs/vct_platinumavc_onenand_small_defconfig index e0e8e44..31b4c9a 100644 --- a/configs/vct_platinumavc_onenand_small_defconfig +++ b/configs/vct_platinumavc_onenand_small_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUMAVC,VCT_ONENAND,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_platinumavc_small_defconfig b/configs/vct_platinumavc_small_defconfig index d8209d1..23f6561 100644 --- a/configs/vct_platinumavc_small_defconfig +++ b/configs/vct_platinumavc_small_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="VCT_PLATINUMAVC,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_premium_onenand_small_defconfig b/configs/vct_premium_onenand_small_defconfig index 220f875..354793e 100644 --- a/configs/vct_premium_onenand_small_defconfig +++ b/configs/vct_premium_onenand_small_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="VCT_PREMIUM,VCT_ONENAND,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/vct_premium_small_defconfig b/configs/vct_premium_small_defconfig index 5335472..a23ddb7 100644 --- a/configs/vct_premium_small_defconfig +++ b/configs/vct_premium_small_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="VCT_PREMIUM,VCT_SMALL_IMAGE" CONFIG_MIPS=y CONFIG_TARGET_VCT=y +# CONFIG_CMD_CRC32 is not set diff --git a/configs/venice2_defconfig b/configs/venice2_defconfig index dfc5407..c12dae9 100644 --- a/configs/venice2_defconfig +++ b/configs/venice2_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA124=y +S:CONFIG_TARGET_VENICE2=y +CONFIG_DEFAULT_DEVICE_TREE="tegra124-venice2" diff --git a/configs/ventana_defconfig b/configs/ventana_defconfig index 845e241..f62ab6b 100644 --- a/configs/ventana_defconfig +++ b/configs/ventana_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_VENTANA=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-ventana" diff --git a/configs/vexpress_aemv8a_defconfig b/configs/vexpress_aemv8a_defconfig index 9e0a175..b463a33 100644 --- a/configs/vexpress_aemv8a_defconfig +++ b/configs/vexpress_aemv8a_defconfig @@ -1,2 +1,3 @@ CONFIG_ARM=y CONFIG_TARGET_VEXPRESS_AEMV8A=y +CONFIG_DEFAULT_DEVICE_TREE="vexpress64" diff --git a/configs/vexpress_aemv8a_semi_defconfig b/configs/vexpress_aemv8a_semi_defconfig index 8fdf4e0..0035ccd 100644 --- a/configs/vexpress_aemv8a_semi_defconfig +++ b/configs/vexpress_aemv8a_semi_defconfig @@ -1,3 +1,4 @@ CONFIG_SYS_EXTRA_OPTIONS="SEMIHOSTING,BASE_FVP" CONFIG_ARM=y CONFIG_TARGET_VEXPRESS_AEMV8A=y +CONFIG_DEFAULT_DEVICE_TREE="vexpress64" diff --git a/configs/whistler_defconfig b/configs/whistler_defconfig index 8c07c18..9553eb8 100644 --- a/configs/whistler_defconfig +++ b/configs/whistler_defconfig @@ -2,3 +2,4 @@ +S:CONFIG_TEGRA=y +S:CONFIG_TEGRA20=y +S:CONFIG_TARGET_WHISTLER=y +CONFIG_DEFAULT_DEVICE_TREE="tegra20-whistler" diff --git a/configs/zynq_microzed_defconfig b/configs/zynq_microzed_defconfig index 3aedb35..9588849 100644 --- a/configs/zynq_microzed_defconfig +++ b/configs/zynq_microzed_defconfig @@ -2,3 +2,5 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_MICROZED=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynq-microzed" diff --git a/configs/zynq_zc70x_defconfig b/configs/zynq_zc70x_defconfig index 04c8def..cf50730 100644 --- a/configs/zynq_zc70x_defconfig +++ b/configs/zynq_zc70x_defconfig @@ -2,3 +2,5 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZC70X=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynq-zc702" diff --git a/configs/zynq_zc770_xm010_defconfig b/configs/zynq_zc770_xm010_defconfig index 1178b40..8bb405d 100644 --- a/configs/zynq_zc770_xm010_defconfig +++ b/configs/zynq_zc770_xm010_defconfig @@ -3,3 +3,5 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM010" +S:CONFIG_ARM=y +S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZC770=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm010" diff --git a/configs/zynq_zc770_xm012_defconfig b/configs/zynq_zc770_xm012_defconfig index 52c2121..0ba5da5 100644 --- a/configs/zynq_zc770_xm012_defconfig +++ b/configs/zynq_zc770_xm012_defconfig @@ -3,3 +3,5 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM012" +S:CONFIG_ARM=y +S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZC770=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm012" diff --git a/configs/zynq_zc770_xm013_defconfig b/configs/zynq_zc770_xm013_defconfig index 836809a..13f8112 100644 --- a/configs/zynq_zc770_xm013_defconfig +++ b/configs/zynq_zc770_xm013_defconfig @@ -3,3 +3,5 @@ CONFIG_SYS_EXTRA_OPTIONS="ZC770_XM013" +S:CONFIG_ARM=y +S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZC770=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynq-zc770-xm013" diff --git a/configs/zynq_zed_defconfig b/configs/zynq_zed_defconfig index 2337906..eb057fa 100644 --- a/configs/zynq_zed_defconfig +++ b/configs/zynq_zed_defconfig @@ -2,3 +2,5 @@ CONFIG_SPL=y +S:CONFIG_ARM=y +S:CONFIG_ZYNQ=y +S:CONFIG_TARGET_ZYNQ_ZED=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="zynq-zed" diff --git a/disk/part.c b/disk/part.c index ecc5e7e..cfd77b0 100644 --- a/disk/part.c +++ b/disk/part.c @@ -133,7 +133,7 @@ typedef lbaint_t lba512_t; * Overflowless variant of (block_count * mul_by / div_by) * when div_by > mul_by */ -static lba512_t lba512_muldiv (lba512_t block_count, lba512_t mul_by, lba512_t div_by) +static lba512_t lba512_muldiv(lba512_t block_count, lba512_t mul_by, lba512_t div_by) { lba512_t bc_quot, bc_rem; @@ -215,7 +215,8 @@ void dev_print (block_dev_desc_t *dev_desc) lba512 = (lba * (dev_desc->blksz/512)); /* round to 1 digit */ - mb = lba512_muldiv(lba512, 10, 2048); /* 2048 = (1024 * 1024) / 512 MB */ + /* 2048 = (1024 * 1024) / 512 MB */ + mb = lba512_muldiv(lba512, 10, 2048); mb_quot = mb / 10; mb_rem = mb - (10 * mb_quot); @@ -248,7 +249,7 @@ void dev_print (block_dev_desc_t *dev_desc) #ifdef HAVE_BLOCK_DEVICE -void init_part (block_dev_desc_t * dev_desc) +void init_part(block_dev_desc_t *dev_desc) { #ifdef CONFIG_ISO_PARTITION if (test_part_iso(dev_desc) == 0) { @@ -295,7 +296,7 @@ void init_part (block_dev_desc_t * dev_desc) defined(CONFIG_AMIGA_PARTITION) || \ defined(CONFIG_EFI_PARTITION) -static void print_part_header (const char *type, block_dev_desc_t * dev_desc) +static void print_part_header(const char *type, block_dev_desc_t *dev_desc) { puts ("\nPartition Map for "); switch (dev_desc->if_type) { diff --git a/doc/README.android-fastboot b/doc/README.android-fastboot index 4045727..1677609 100644 --- a/doc/README.android-fastboot +++ b/doc/README.android-fastboot @@ -6,8 +6,9 @@ Overview The protocol that is used over USB is described in README.android-fastboot-protocol in same directory. -The current implementation does not yet support the flash and erase -commands. +The current implementation does not yet support the erase command or the +"oem format" command, and there is minimal support for the flash command; +it only supports eMMC devices. Client installation =================== diff --git a/doc/README.clang b/doc/README.clang index 9ad689f..52495d3 100644 --- a/doc/README.clang +++ b/doc/README.clang @@ -34,21 +34,21 @@ make HOSTCC=clang CC="clang -target $TRIPLET -mllvm -arm-use-movt=0 -no-integrat FreeBSD 11 (Current): -------------------- Since llvm 3.4 is currently in the base system, the integrated as is -incapable of building U-Boot. Therefore gas from devel/arm-eabi-binutils +incapable of building U-Boot. Therefore gas from devel/arm-gnueabi-binutils is used instead. It needs a symlinks to be picked up correctly though: -ln -s /usr/local/bin/arm-eabi-as /usr/bin/arm-freebsd-eabi-as +ln -s /usr/local/bin/arm-gnueabi-freebsd-as /usr/bin/arm-freebsd-eabi-as # The following commands compile U-Boot using the clang xdev toolchain. # NOTE: CROSS_COMPILE and target differ on purpose! -export CROSS_COMPILE=arm-eabi- +export CROSS_COMPILE=arm-gnueabi-freebsd- gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" rpi_b_defconfig gmake CC="clang -target arm-freebsd-eabi --sysroot /usr/arm-freebsd -no-integrated-as -mllvm -arm-use-movt=0" -j8 Given that u-boot will default to gcc, above commands can be simplified with a simple wrapper script, listed below. -/usr/local/bin/arm-eabi-gcc +/usr/local/bin/arm-gnueabi-freebsd-gcc --- #!/bin/sh diff --git a/doc/README.nand b/doc/README.nand index e29188f..320d752 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -215,6 +215,12 @@ Configuration Options: Platform specific options ========================= + CONFIG_NAND_DENALI + Enables the denali.c driver. + + CONFIG_SYS_NAND_DENALI_64BIT + Indicates that the Denali NAND controller is the 64-bit variant. + CONFIG_NAND_OMAP_GPMC Enables omap_gpmc.c driver for OMAPx and AMxxxx platforms. GPMC controller is used for parallel NAND flash devices, and can diff --git a/drivers/Kconfig b/drivers/Kconfig new file mode 100644 index 0000000..128736d --- /dev/null +++ b/drivers/Kconfig @@ -0,0 +1,51 @@ +menu "Device Drivers" + +source "drivers/core/Kconfig" + +source "drivers/pci/Kconfig" + +source "drivers/pcmcia/Kconfig" + +source "drivers/mtd/Kconfig" + +source "drivers/block/Kconfig" + +source "drivers/misc/Kconfig" + +source "drivers/net/Kconfig" + +source "drivers/input/Kconfig" + +source "drivers/serial/Kconfig" + +source "drivers/tpm/Kconfig" + +source "drivers/i2c/Kconfig" + +source "drivers/spi/Kconfig" + +source "drivers/gpio/Kconfig" + +source "drivers/power/Kconfig" + +source "drivers/hwmon/Kconfig" + +source "drivers/watchdog/Kconfig" + +source "drivers/video/Kconfig" + +source "drivers/sound/Kconfig" + +source "drivers/usb/Kconfig" + +source "drivers/dfu/Kconfig" + +source "drivers/mmc/Kconfig" + +source "drivers/rtc/Kconfig" + +source "drivers/dma/Kconfig" + +source "drivers/crypto/Kconfig" + +endmenu diff --git a/drivers/Makefile b/drivers/Makefile index b22b109..d8361d9 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -1,3 +1,5 @@ +obj-$(CONFIG_DM) += core/ +obj-$(CONFIG_DM_DEMO) += demo/ obj-$(CONFIG_BIOSEMU) += bios_emulator/ obj-y += block/ obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/ @@ -16,3 +18,4 @@ obj-y += watchdog/ obj-$(CONFIG_QE) += qe/ obj-y += memory/ obj-y += pwm/ +obj-y += input/ diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/block/Kconfig diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/core/Kconfig diff --git a/drivers/core/Makefile b/drivers/core/Makefile index 90b2a7f..c7905b1 100644 --- a/drivers/core/Makefile +++ b/drivers/core/Makefile @@ -4,4 +4,4 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_DM) := device.o lists.o root.o uclass.o util.o +obj-y := device.o lists.o root.o uclass.o util.o diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/crypto/Kconfig diff --git a/drivers/demo/Makefile b/drivers/demo/Makefile index baaa2ba..171ddf3 100644 --- a/drivers/demo/Makefile +++ b/drivers/demo/Makefile @@ -4,6 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-$(CONFIG_DM_DEMO) += demo-uclass.o demo-pdata.o +obj-y += demo-uclass.o demo-pdata.o obj-$(CONFIG_DM_DEMO_SIMPLE) += demo-simple.o obj-$(CONFIG_DM_DEMO_SHAPE) += demo-shape.o diff --git a/drivers/dfu/Kconfig b/drivers/dfu/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/dfu/Kconfig diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/dma/Kconfig diff --git a/drivers/dma/fsl_dma.c b/drivers/dma/fsl_dma.c index 45e49c7..7ef7f12 100644 --- a/drivers/dma/fsl_dma.c +++ b/drivers/dma/fsl_dma.c @@ -96,7 +96,7 @@ int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) { uint xfer_size; while (count) { - xfer_size = MIN(FSL_DMA_MAX_SIZE, count); + xfer_size = min(FSL_DMA_MAX_SIZE, count); out_dma32(&dma->dar, (u32) (dest & 0xFFFFFFFF)); out_dma32(&dma->sar, (u32) (src & 0xFFFFFFFF)); diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/gpio/Kconfig diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/hwmon/Kconfig diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/i2c/Kconfig diff --git a/drivers/i2c/ihs_i2c.c b/drivers/i2c/ihs_i2c.c index fe66ce2..19fbe59 100644 --- a/drivers/i2c/ihs_i2c.c +++ b/drivers/i2c/ihs_i2c.c @@ -84,7 +84,7 @@ static int ihs_i2c_address(uchar chip, uint addr, int alen, bool hold_bus) int shift = (alen-1) * 8; while (alen) { - int transfer = MIN(alen, 2); + int transfer = min(alen, 2); uchar buf[2]; bool is_last = alen <= transfer; @@ -113,7 +113,7 @@ static int ihs_i2c_access(struct i2c_adapter *adap, uchar chip, uint addr, return 1; while (len) { - int transfer = MIN(len, 2); + int transfer = min(len, 2); if (ihs_i2c_transfer(chip, buffer, transfer, read, len <= transfer)) diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/input/Kconfig diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/misc/Kconfig diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/mmc/Kconfig diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 97d0389..2640607 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -610,7 +610,7 @@ int fsl_esdhc_initialize(bd_t *bis, struct fsl_esdhc_cfg *cfg) #endif cfg->cfg.f_min = 400000; - cfg->cfg.f_max = MIN(gd->arch.sdhc_clk, 52000000); + cfg->cfg.f_max = min(gd->arch.sdhc_clk, 52000000); cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT; diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/mtd/Kconfig diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index bf1312a..f298f84 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -42,6 +42,7 @@ obj-$(CONFIG_NAND_ECC_BCH) += nand_bch.o obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o obj-$(CONFIG_DRIVER_NAND_BFIN) += bfin_nand.o obj-$(CONFIG_NAND_DAVINCI) += davinci_nand.o +obj-$(CONFIG_NAND_DENALI) += denali.o obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o obj-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o diff --git a/drivers/mtd/nand/am335x_spl_bch.c b/drivers/mtd/nand/am335x_spl_bch.c index ce65d8e..bf8b2ee 100644 --- a/drivers/mtd/nand/am335x_spl_bch.c +++ b/drivers/mtd/nand/am335x_spl_bch.c @@ -64,14 +64,18 @@ static int nand_command(int block, int page, uint32_t offs, NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */ hwctrl(&nand_info[0], (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */ /* Row address */ - hwctrl(&nand_info[0], (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */ - hwctrl(&nand_info[0], ((page_addr >> 8) & 0xff), + if (cmd != NAND_CMD_RNDOUT) { + hwctrl(&nand_info[0], (page_addr & 0xff), + NAND_CTRL_ALE); /* A[19:12] */ + hwctrl(&nand_info[0], ((page_addr >> 8) & 0xff), NAND_CTRL_ALE); /* A[27:20] */ #ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE - /* One more address cycle for devices > 128MiB */ - hwctrl(&nand_info[0], (page_addr >> 16) & 0x0f, + /* One more address cycle for devices > 128MiB */ + hwctrl(&nand_info[0], (page_addr >> 16) & 0x0f, NAND_CTRL_ALE); /* A[31:28] */ #endif + } + hwctrl(&nand_info[0], NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); if (cmd == NAND_CMD_READ0) { diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c new file mode 100644 index 0000000..ba3de1a --- /dev/null +++ b/drivers/mtd/nand/denali.c @@ -0,0 +1,1205 @@ +/* + * Copyright (C) 2014 Panasonic Corporation + * Copyright (C) 2013-2014, Altera Corporation <www.altera.com> + * Copyright (C) 2009-2010, Intel Corporation and its suppliers. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <malloc.h> +#include <nand.h> +#include <asm/errno.h> +#include <asm/io.h> + +#include "denali.h" + +#define NAND_DEFAULT_TIMINGS -1 + +static int onfi_timing_mode = NAND_DEFAULT_TIMINGS; + +/* We define a macro here that combines all interrupts this driver uses into + * a single constant value, for convenience. */ +#define DENALI_IRQ_ALL (INTR_STATUS__DMA_CMD_COMP | \ + INTR_STATUS__ECC_TRANSACTION_DONE | \ + INTR_STATUS__ECC_ERR | \ + INTR_STATUS__PROGRAM_FAIL | \ + INTR_STATUS__LOAD_COMP | \ + INTR_STATUS__PROGRAM_COMP | \ + INTR_STATUS__TIME_OUT | \ + INTR_STATUS__ERASE_FAIL | \ + INTR_STATUS__RST_COMP | \ + INTR_STATUS__ERASE_COMP | \ + INTR_STATUS__ECC_UNCOR_ERR | \ + INTR_STATUS__INT_ACT | \ + INTR_STATUS__LOCKED_BLK) + +/* indicates whether or not the internal value for the flash bank is + * valid or not */ +#define CHIP_SELECT_INVALID -1 + +#define SUPPORT_8BITECC 1 + +/* + * this macro allows us to convert from an MTD structure to our own + * device context (denali) structure. + */ +#define mtd_to_denali(m) (((struct nand_chip *)mtd->priv)->priv) + +/* These constants are defined by the driver to enable common driver + * configuration options. */ +#define SPARE_ACCESS 0x41 +#define MAIN_ACCESS 0x42 +#define MAIN_SPARE_ACCESS 0x43 + +#define DENALI_UNLOCK_START 0x10 +#define DENALI_UNLOCK_END 0x11 +#define DENALI_LOCK 0x21 +#define DENALI_LOCK_TIGHT 0x31 +#define DENALI_BUFFER_LOAD 0x60 +#define DENALI_BUFFER_WRITE 0x62 + +#define DENALI_READ 0 +#define DENALI_WRITE 0x100 + +/* types of device accesses. We can issue commands and get status */ +#define COMMAND_CYCLE 0 +#define ADDR_CYCLE 1 +#define STATUS_CYCLE 2 + +/* this is a helper macro that allows us to + * format the bank into the proper bits for the controller */ +#define BANK(x) ((x) << 24) + +/* Interrupts are cleared by writing a 1 to the appropriate status bit */ +static inline void clear_interrupt(struct denali_nand_info *denali, + uint32_t irq_mask) +{ + uint32_t intr_status_reg; + + intr_status_reg = INTR_STATUS(denali->flash_bank); + + writel(irq_mask, denali->flash_reg + intr_status_reg); +} + +static uint32_t read_interrupt_status(struct denali_nand_info *denali) +{ + uint32_t intr_status_reg; + + intr_status_reg = INTR_STATUS(denali->flash_bank); + + return readl(denali->flash_reg + intr_status_reg); +} + +static void clear_interrupts(struct denali_nand_info *denali) +{ + uint32_t status; + + status = read_interrupt_status(denali); + clear_interrupt(denali, status); + + denali->irq_status = 0; +} + +static void denali_irq_enable(struct denali_nand_info *denali, + uint32_t int_mask) +{ + int i; + + for (i = 0; i < denali->max_banks; ++i) + writel(int_mask, denali->flash_reg + INTR_EN(i)); +} + +static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask) +{ + unsigned long timeout = 1000000; + uint32_t intr_status; + + do { + intr_status = read_interrupt_status(denali) & DENALI_IRQ_ALL; + if (intr_status & irq_mask) { + denali->irq_status &= ~irq_mask; + /* our interrupt was detected */ + break; + } + udelay(1); + timeout--; + } while (timeout != 0); + + if (timeout == 0) { + /* timeout */ + printf("Denali timeout with interrupt status %08x\n", + read_interrupt_status(denali)); + intr_status = 0; + } + return intr_status; +} + +/* + * Certain operations for the denali NAND controller use an indexed mode to + * read/write data. The operation is performed by writing the address value + * of the command to the device memory followed by the data. This function + * abstracts this common operation. +*/ +static void index_addr(struct denali_nand_info *denali, + uint32_t address, uint32_t data) +{ + writel(address, denali->flash_mem + INDEX_CTRL_REG); + writel(data, denali->flash_mem + INDEX_DATA_REG); +} + +/* Perform an indexed read of the device */ +static void index_addr_read_data(struct denali_nand_info *denali, + uint32_t address, uint32_t *pdata) +{ + writel(address, denali->flash_mem + INDEX_CTRL_REG); + *pdata = readl(denali->flash_mem + INDEX_DATA_REG); +} + +/* We need to buffer some data for some of the NAND core routines. + * The operations manage buffering that data. */ +static void reset_buf(struct denali_nand_info *denali) +{ + denali->buf.head = 0; + denali->buf.tail = 0; +} + +static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte) +{ + denali->buf.buf[denali->buf.tail++] = byte; +} + +/* resets a specific device connected to the core */ +static void reset_bank(struct denali_nand_info *denali) +{ + uint32_t irq_status; + uint32_t irq_mask = INTR_STATUS__RST_COMP | + INTR_STATUS__TIME_OUT; + + clear_interrupts(denali); + + writel(1 << denali->flash_bank, denali->flash_reg + DEVICE_RESET); + + irq_status = wait_for_irq(denali, irq_mask); + if (irq_status & INTR_STATUS__TIME_OUT) + debug("reset bank failed.\n"); +} + +/* Reset the flash controller */ +static uint32_t denali_nand_reset(struct denali_nand_info *denali) +{ + uint32_t i; + + for (i = 0; i < denali->max_banks; i++) + writel(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT, + denali->flash_reg + INTR_STATUS(i)); + + for (i = 0; i < denali->max_banks; i++) { + writel(1 << i, denali->flash_reg + DEVICE_RESET); + while (!(readl(denali->flash_reg + INTR_STATUS(i)) & + (INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT))) + if (readl(denali->flash_reg + INTR_STATUS(i)) & + INTR_STATUS__TIME_OUT) + debug("NAND Reset operation timed out on bank" + " %d\n", i); + } + + for (i = 0; i < denali->max_banks; i++) + writel(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT, + denali->flash_reg + INTR_STATUS(i)); + + return 0; +} + +/* + * this routine calculates the ONFI timing values for a given mode and + * programs the clocking register accordingly. The mode is determined by + * the get_onfi_nand_para routine. + */ +static void nand_onfi_timing_set(struct denali_nand_info *denali, + uint16_t mode) +{ + uint32_t trea[6] = {40, 30, 25, 20, 20, 16}; + uint32_t trp[6] = {50, 25, 17, 15, 12, 10}; + uint32_t treh[6] = {30, 15, 15, 10, 10, 7}; + uint32_t trc[6] = {100, 50, 35, 30, 25, 20}; + uint32_t trhoh[6] = {0, 15, 15, 15, 15, 15}; + uint32_t trloh[6] = {0, 0, 0, 0, 5, 5}; + uint32_t tcea[6] = {100, 45, 30, 25, 25, 25}; + uint32_t tadl[6] = {200, 100, 100, 100, 70, 70}; + uint32_t trhw[6] = {200, 100, 100, 100, 100, 100}; + uint32_t trhz[6] = {200, 100, 100, 100, 100, 100}; + uint32_t twhr[6] = {120, 80, 80, 60, 60, 60}; + uint32_t tcs[6] = {70, 35, 25, 25, 20, 15}; + + uint32_t tclsrising = 1; + uint32_t data_invalid_rhoh, data_invalid_rloh, data_invalid; + uint32_t dv_window = 0; + uint32_t en_lo, en_hi; + uint32_t acc_clks; + uint32_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt; + + en_lo = DIV_ROUND_UP(trp[mode], CLK_X); + en_hi = DIV_ROUND_UP(treh[mode], CLK_X); + if ((en_hi * CLK_X) < (treh[mode] + 2)) + en_hi++; + + if ((en_lo + en_hi) * CLK_X < trc[mode]) + en_lo += DIV_ROUND_UP((trc[mode] - (en_lo + en_hi) * CLK_X), + CLK_X); + + if ((en_lo + en_hi) < CLK_MULTI) + en_lo += CLK_MULTI - en_lo - en_hi; + + while (dv_window < 8) { + data_invalid_rhoh = en_lo * CLK_X + trhoh[mode]; + + data_invalid_rloh = (en_lo + en_hi) * CLK_X + trloh[mode]; + + data_invalid = + data_invalid_rhoh < + data_invalid_rloh ? data_invalid_rhoh : data_invalid_rloh; + + dv_window = data_invalid - trea[mode]; + + if (dv_window < 8) + en_lo++; + } + + acc_clks = DIV_ROUND_UP(trea[mode], CLK_X); + + while (((acc_clks * CLK_X) - trea[mode]) < 3) + acc_clks++; + + if ((data_invalid - acc_clks * CLK_X) < 2) + debug("%s, Line %d: Warning!\n", __FILE__, __LINE__); + + addr_2_data = DIV_ROUND_UP(tadl[mode], CLK_X); + re_2_we = DIV_ROUND_UP(trhw[mode], CLK_X); + re_2_re = DIV_ROUND_UP(trhz[mode], CLK_X); + we_2_re = DIV_ROUND_UP(twhr[mode], CLK_X); + cs_cnt = DIV_ROUND_UP((tcs[mode] - trp[mode]), CLK_X); + if (!tclsrising) + cs_cnt = DIV_ROUND_UP(tcs[mode], CLK_X); + if (cs_cnt == 0) + cs_cnt = 1; + + if (tcea[mode]) { + while (((cs_cnt * CLK_X) + trea[mode]) < tcea[mode]) + cs_cnt++; + } + + /* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */ + if ((readl(denali->flash_reg + MANUFACTURER_ID) == 0) && + (readl(denali->flash_reg + DEVICE_ID) == 0x88)) + acc_clks = 6; + + writel(acc_clks, denali->flash_reg + ACC_CLKS); + writel(re_2_we, denali->flash_reg + RE_2_WE); + writel(re_2_re, denali->flash_reg + RE_2_RE); + writel(we_2_re, denali->flash_reg + WE_2_RE); + writel(addr_2_data, denali->flash_reg + ADDR_2_DATA); + writel(en_lo, denali->flash_reg + RDWR_EN_LO_CNT); + writel(en_hi, denali->flash_reg + RDWR_EN_HI_CNT); + writel(cs_cnt, denali->flash_reg + CS_SETUP_CNT); +} + +/* queries the NAND device to see what ONFI modes it supports. */ +static uint32_t get_onfi_nand_para(struct denali_nand_info *denali) +{ + int i; + /* + * we needn't to do a reset here because driver has already + * reset all the banks before + */ + if (!(readl(denali->flash_reg + ONFI_TIMING_MODE) & + ONFI_TIMING_MODE__VALUE)) + return -EIO; + + for (i = 5; i > 0; i--) { + if (readl(denali->flash_reg + ONFI_TIMING_MODE) & + (0x01 << i)) + break; + } + + nand_onfi_timing_set(denali, i); + + /* By now, all the ONFI devices we know support the page cache */ + /* rw feature. So here we enable the pipeline_rw_ahead feature */ + return 0; +} + +static void get_samsung_nand_para(struct denali_nand_info *denali, + uint8_t device_id) +{ + if (device_id == 0xd3) { /* Samsung K9WAG08U1A */ + /* Set timing register values according to datasheet */ + writel(5, denali->flash_reg + ACC_CLKS); + writel(20, denali->flash_reg + RE_2_WE); + writel(12, denali->flash_reg + WE_2_RE); + writel(14, denali->flash_reg + ADDR_2_DATA); + writel(3, denali->flash_reg + RDWR_EN_LO_CNT); + writel(2, denali->flash_reg + RDWR_EN_HI_CNT); + writel(2, denali->flash_reg + CS_SETUP_CNT); + } +} + +static void get_toshiba_nand_para(struct denali_nand_info *denali) +{ + uint32_t tmp; + + /* Workaround to fix a controller bug which reports a wrong */ + /* spare area size for some kind of Toshiba NAND device */ + if ((readl(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) && + (readl(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) { + writel(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); + tmp = readl(denali->flash_reg + DEVICES_CONNECTED) * + readl(denali->flash_reg + DEVICE_SPARE_AREA_SIZE); + writel(tmp, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE); + } +} + +static void get_hynix_nand_para(struct denali_nand_info *denali, + uint8_t device_id) +{ + uint32_t main_size, spare_size; + + switch (device_id) { + case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */ + case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */ + writel(128, denali->flash_reg + PAGES_PER_BLOCK); + writel(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE); + writel(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE); + main_size = 4096 * + readl(denali->flash_reg + DEVICES_CONNECTED); + spare_size = 224 * + readl(denali->flash_reg + DEVICES_CONNECTED); + writel(main_size, denali->flash_reg + LOGICAL_PAGE_DATA_SIZE); + writel(spare_size, denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE); + writel(0, denali->flash_reg + DEVICE_WIDTH); + break; + default: + debug("Spectra: Unknown Hynix NAND (Device ID: 0x%x)." + "Will use default parameter values instead.\n", + device_id); + } +} + +/* + * determines how many NAND chips are connected to the controller. Note for + * Intel CE4100 devices we don't support more than one device. + */ +static void find_valid_banks(struct denali_nand_info *denali) +{ + uint32_t id[denali->max_banks]; + int i; + + denali->total_used_banks = 1; + for (i = 0; i < denali->max_banks; i++) { + index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 0), 0x90); + index_addr(denali, (uint32_t)(MODE_11 | (i << 24) | 1), 0); + index_addr_read_data(denali, + (uint32_t)(MODE_11 | (i << 24) | 2), + &id[i]); + + if (i == 0) { + if (!(id[i] & 0x0ff)) + break; + } else { + if ((id[i] & 0x0ff) == (id[0] & 0x0ff)) + denali->total_used_banks++; + else + break; + } + } +} + +/* + * Use the configuration feature register to determine the maximum number of + * banks that the hardware supports. + */ +static void detect_max_banks(struct denali_nand_info *denali) +{ + uint32_t features = readl(denali->flash_reg + FEATURES); + denali->max_banks = 2 << (features & FEATURES__N_BANKS); +} + +static void detect_partition_feature(struct denali_nand_info *denali) +{ + /* + * For MRST platform, denali->fwblks represent the + * number of blocks firmware is taken, + * FW is in protect partition and MTD driver has no + * permission to access it. So let driver know how many + * blocks it can't touch. + */ + if (readl(denali->flash_reg + FEATURES) & FEATURES__PARTITION) { + if ((readl(denali->flash_reg + PERM_SRC_ID(1)) & + PERM_SRC_ID__SRCID) == SPECTRA_PARTITION_ID) { + denali->fwblks = + ((readl(denali->flash_reg + MIN_MAX_BANK(1)) & + MIN_MAX_BANK__MIN_VALUE) * + denali->blksperchip) + + + (readl(denali->flash_reg + MIN_BLK_ADDR(1)) & + MIN_BLK_ADDR__VALUE); + } else { + denali->fwblks = SPECTRA_START_BLOCK; + } + } else { + denali->fwblks = SPECTRA_START_BLOCK; + } +} + +static uint32_t denali_nand_timing_set(struct denali_nand_info *denali) +{ + uint32_t id_bytes[5], addr; + uint8_t i, maf_id, device_id; + + /* Use read id method to get device ID and other + * params. For some NAND chips, controller can't + * report the correct device ID by reading from + * DEVICE_ID register + * */ + addr = (uint32_t)MODE_11 | BANK(denali->flash_bank); + index_addr(denali, (uint32_t)addr | 0, 0x90); + index_addr(denali, (uint32_t)addr | 1, 0); + for (i = 0; i < 5; i++) + index_addr_read_data(denali, addr | 2, &id_bytes[i]); + maf_id = id_bytes[0]; + device_id = id_bytes[1]; + + if (readl(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) & + ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */ + if (get_onfi_nand_para(denali)) + return -EIO; + } else if (maf_id == 0xEC) { /* Samsung NAND */ + get_samsung_nand_para(denali, device_id); + } else if (maf_id == 0x98) { /* Toshiba NAND */ + get_toshiba_nand_para(denali); + } else if (maf_id == 0xAD) { /* Hynix NAND */ + get_hynix_nand_para(denali, device_id); + } + + find_valid_banks(denali); + + detect_partition_feature(denali); + + /* If the user specified to override the default timings + * with a specific ONFI mode, we apply those changes here. + */ + if (onfi_timing_mode != NAND_DEFAULT_TIMINGS) + nand_onfi_timing_set(denali, onfi_timing_mode); + + return 0; +} + +/* validation function to verify that the controlling software is making + * a valid request + */ +static inline bool is_flash_bank_valid(int flash_bank) +{ + return flash_bank >= 0 && flash_bank < 4; +} + +static void denali_irq_init(struct denali_nand_info *denali) +{ + uint32_t int_mask = 0; + int i; + + /* Disable global interrupts */ + writel(0, denali->flash_reg + GLOBAL_INT_ENABLE); + + int_mask = DENALI_IRQ_ALL; + + /* Clear all status bits */ + for (i = 0; i < denali->max_banks; ++i) + writel(0xFFFF, denali->flash_reg + INTR_STATUS(i)); + + denali_irq_enable(denali, int_mask); +} + +/* This helper function setups the registers for ECC and whether or not + * the spare area will be transferred. */ +static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en, + bool transfer_spare) +{ + int ecc_en_flag = 0, transfer_spare_flag = 0; + + /* set ECC, transfer spare bits if needed */ + ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0; + transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0; + + /* Enable spare area/ECC per user's request. */ + writel(ecc_en_flag, denali->flash_reg + ECC_ENABLE); + /* applicable for MAP01 only */ + writel(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG); +} + +/* sends a pipeline command operation to the controller. See the Denali NAND + * controller's user guide for more information (section 4.2.3.6). + */ +static int denali_send_pipeline_cmd(struct denali_nand_info *denali, + bool ecc_en, bool transfer_spare, + int access_type, int op) +{ + uint32_t addr, cmd, irq_status; + static uint32_t page_count = 1; + + setup_ecc_for_xfer(denali, ecc_en, transfer_spare); + + /* clear interrupts */ + clear_interrupts(denali); + + addr = BANK(denali->flash_bank) | denali->page; + + /* setup the acccess type */ + cmd = MODE_10 | addr; + index_addr(denali, cmd, access_type); + + /* setup the pipeline command */ + index_addr(denali, cmd, 0x2000 | op | page_count); + + cmd = MODE_01 | addr; + writel(cmd, denali->flash_mem + INDEX_CTRL_REG); + + if (op == DENALI_READ) { + /* wait for command to be accepted */ + irq_status = wait_for_irq(denali, INTR_STATUS__LOAD_COMP); + + if (irq_status == 0) + return -EIO; + } + + return 0; +} + +/* helper function that simply writes a buffer to the flash */ +static int write_data_to_flash_mem(struct denali_nand_info *denali, + const uint8_t *buf, int len) +{ + uint32_t i = 0, *buf32; + + /* verify that the len is a multiple of 4. see comment in + * read_data_from_flash_mem() */ + BUG_ON((len % 4) != 0); + + /* write the data to the flash memory */ + buf32 = (uint32_t *)buf; + for (i = 0; i < len / 4; i++) + writel(*buf32++, denali->flash_mem + INDEX_DATA_REG); + return i * 4; /* intent is to return the number of bytes read */ +} + +/* helper function that simply reads a buffer from the flash */ +static int read_data_from_flash_mem(struct denali_nand_info *denali, + uint8_t *buf, int len) +{ + uint32_t i, *buf32; + + /* + * we assume that len will be a multiple of 4, if not + * it would be nice to know about it ASAP rather than + * have random failures... + * This assumption is based on the fact that this + * function is designed to be used to read flash pages, + * which are typically multiples of 4... + */ + + BUG_ON((len % 4) != 0); + + /* transfer the data from the flash */ + buf32 = (uint32_t *)buf; + for (i = 0; i < len / 4; i++) + *buf32++ = readl(denali->flash_mem + INDEX_DATA_REG); + + return i * 4; /* intent is to return the number of bytes read */ +} + +static void denali_mode_main_access(struct denali_nand_info *denali) +{ + uint32_t addr, cmd; + + addr = BANK(denali->flash_bank) | denali->page; + cmd = MODE_10 | addr; + index_addr(denali, cmd, MAIN_ACCESS); +} + +static void denali_mode_main_spare_access(struct denali_nand_info *denali) +{ + uint32_t addr, cmd; + + addr = BANK(denali->flash_bank) | denali->page; + cmd = MODE_10 | addr; + index_addr(denali, cmd, MAIN_SPARE_ACCESS); +} + +/* writes OOB data to the device */ +static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t irq_status; + uint32_t irq_mask = INTR_STATUS__PROGRAM_COMP | + INTR_STATUS__PROGRAM_FAIL; + int status = 0; + + denali->page = page; + + if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, + DENALI_WRITE) == 0) { + write_data_to_flash_mem(denali, buf, mtd->oobsize); + + /* wait for operation to complete */ + irq_status = wait_for_irq(denali, irq_mask); + + if (irq_status == 0) { + dev_err(denali->dev, "OOB write failed\n"); + status = -EIO; + } + } else { + printf("unable to send pipeline command\n"); + status = -EIO; + } + return status; +} + +/* reads OOB data from the device */ +static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t irq_mask = INTR_STATUS__LOAD_COMP, + irq_status = 0, addr = 0x0, cmd = 0x0; + + denali->page = page; + + if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, + DENALI_READ) == 0) { + read_data_from_flash_mem(denali, buf, mtd->oobsize); + + /* wait for command to be accepted + * can always use status0 bit as the mask is identical for each + * bank. */ + irq_status = wait_for_irq(denali, irq_mask); + + if (irq_status == 0) + printf("page on OOB timeout %d\n", denali->page); + + /* We set the device back to MAIN_ACCESS here as I observed + * instability with the controller if you do a block erase + * and the last transaction was a SPARE_ACCESS. Block erase + * is reliable (according to the MTD test infrastructure) + * if you are in MAIN_ACCESS. + */ + addr = BANK(denali->flash_bank) | denali->page; + cmd = MODE_10 | addr; + index_addr(denali, cmd, MAIN_ACCESS); + } +} + +/* this function examines buffers to see if they contain data that + * indicate that the buffer is part of an erased region of flash. + */ +static bool is_erased(uint8_t *buf, int len) +{ + int i = 0; + for (i = 0; i < len; i++) + if (buf[i] != 0xFF) + return false; + return true; +} + +/* programs the controller to either enable/disable DMA transfers */ +static void denali_enable_dma(struct denali_nand_info *denali, bool en) +{ + uint32_t reg_val = 0x0; + + if (en) + reg_val = DMA_ENABLE__FLAG; + + writel(reg_val, denali->flash_reg + DMA_ENABLE); + readl(denali->flash_reg + DMA_ENABLE); +} + +/* setups the HW to perform the data DMA */ +static void denali_setup_dma(struct denali_nand_info *denali, int op) +{ + uint32_t mode; + const int page_count = 1; + uint32_t addr = (uint32_t)denali->buf.dma_buf; + + flush_dcache_range(addr, addr + sizeof(denali->buf.dma_buf)); + +/* For Denali controller that is 64 bit bus IP core */ +#ifdef CONFIG_SYS_NAND_DENALI_64BIT + mode = MODE_10 | BANK(denali->flash_bank) | denali->page; + + /* DMA is a three step process */ + + /* 1. setup transfer type, interrupt when complete, + burst len = 64 bytes, the number of pages */ + index_addr(denali, mode, 0x01002000 | (64 << 16) | op | page_count); + + /* 2. set memory low address bits 31:0 */ + index_addr(denali, mode, addr); + + /* 3. set memory high address bits 64:32 */ + index_addr(denali, mode, 0); +#else + mode = MODE_10 | BANK(denali->flash_bank); + + /* DMA is a four step process */ + + /* 1. setup transfer type and # of pages */ + index_addr(denali, mode | denali->page, 0x2000 | op | page_count); + + /* 2. set memory high address bits 23:8 */ + index_addr(denali, mode | ((uint32_t)(addr >> 16) << 8), 0x2200); + + /* 3. set memory low address bits 23:8 */ + index_addr(denali, mode | ((uint32_t)addr << 8), 0x2300); + + /* 4. interrupt when complete, burst len = 64 bytes*/ + index_addr(denali, mode | 0x14000, 0x2400); +#endif +} + +/* Common DMA function */ +static uint32_t denali_dma_configuration(struct denali_nand_info *denali, + uint32_t ops, bool raw_xfer, + uint32_t irq_mask, int oob_required) +{ + uint32_t irq_status = 0; + /* setup_ecc_for_xfer(bool ecc_en, bool transfer_spare) */ + setup_ecc_for_xfer(denali, !raw_xfer, oob_required); + + /* clear any previous interrupt flags */ + clear_interrupts(denali); + + /* enable the DMA */ + denali_enable_dma(denali, true); + + /* setup the DMA */ + denali_setup_dma(denali, ops); + + /* wait for operation to complete */ + irq_status = wait_for_irq(denali, irq_mask); + + /* if ECC fault happen, seems we need delay before turning off DMA. + * If not, the controller will go into non responsive condition */ + if (irq_status & INTR_STATUS__ECC_UNCOR_ERR) + udelay(100); + + /* disable the DMA */ + denali_enable_dma(denali, false); + + return irq_status; +} + +static int write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, bool raw_xfer, int oob_required) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + + uint32_t irq_status = 0; + uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP; + + denali->status = 0; + + /* copy buffer into DMA buffer */ + memcpy(denali->buf.dma_buf, buf, mtd->writesize); + + /* need extra memcpy for raw transfer */ + if (raw_xfer) + memcpy(denali->buf.dma_buf + mtd->writesize, + chip->oob_poi, mtd->oobsize); + + /* setting up DMA */ + irq_status = denali_dma_configuration(denali, DENALI_WRITE, raw_xfer, + irq_mask, oob_required); + + /* if timeout happen, error out */ + if (!(irq_status & INTR_STATUS__DMA_CMD_COMP)) { + debug("DMA timeout for denali write_page\n"); + denali->status = NAND_STATUS_FAIL; + return -EIO; + } + + if (irq_status & INTR_STATUS__LOCKED_BLK) { + debug("Failed as write to locked block\n"); + denali->status = NAND_STATUS_FAIL; + return -EIO; + } + return 0; +} + +/* NAND core entry points */ + +/* + * this is the callback that the NAND core calls to write a page. Since + * writing a page with ECC or without is similar, all the work is done + * by write_page above. + */ +static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + + /* + * for regular page writes, we let HW handle all the ECC + * data written to the device. + */ + if (oob_required) + /* switch to main + spare access */ + denali_mode_main_spare_access(denali); + else + /* switch to main access only */ + denali_mode_main_access(denali); + + return write_page(mtd, chip, buf, false, oob_required); +} + +/* + * This is the callback that the NAND core calls to write a page without ECC. + * raw access is similar to ECC page writes, so all the work is done in the + * write_page() function above. + */ +static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + + /* + * for raw page writes, we want to disable ECC and simply write + * whatever data is in the buffer. + */ + + if (oob_required) + /* switch to main + spare access */ + denali_mode_main_spare_access(denali); + else + /* switch to main access only */ + denali_mode_main_access(denali); + + return write_page(mtd, chip, buf, true, oob_required); +} + +static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip, + int page) +{ + return write_oob_data(mtd, chip->oob_poi, page); +} + +/* raw include ECC value and all the spare area */ +static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + + uint32_t irq_status, irq_mask = INTR_STATUS__DMA_CMD_COMP; + + if (denali->page != page) { + debug("Missing NAND_CMD_READ0 command\n"); + return -EIO; + } + + if (oob_required) + /* switch to main + spare access */ + denali_mode_main_spare_access(denali); + else + /* switch to main access only */ + denali_mode_main_access(denali); + + /* setting up the DMA where ecc_enable is false */ + irq_status = denali_dma_configuration(denali, DENALI_READ, true, + irq_mask, oob_required); + + /* if timeout happen, error out */ + if (!(irq_status & INTR_STATUS__DMA_CMD_COMP)) { + debug("DMA timeout for denali_read_page_raw\n"); + return -EIO; + } + + /* splitting the content to destination buffer holder */ + memcpy(chip->oob_poi, (denali->buf.dma_buf + mtd->writesize), + mtd->oobsize); + memcpy(buf, denali->buf.dma_buf, mtd->writesize); + + return 0; +} + +static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t irq_status, irq_mask = INTR_STATUS__DMA_CMD_COMP; + + if (denali->page != page) { + debug("Missing NAND_CMD_READ0 command\n"); + return -EIO; + } + + if (oob_required) + /* switch to main + spare access */ + denali_mode_main_spare_access(denali); + else + /* switch to main access only */ + denali_mode_main_access(denali); + + /* setting up the DMA where ecc_enable is true */ + irq_status = denali_dma_configuration(denali, DENALI_READ, false, + irq_mask, oob_required); + + memcpy(buf, denali->buf.dma_buf, mtd->writesize); + + /* check whether any ECC error */ + if (irq_status & INTR_STATUS__ECC_UNCOR_ERR) { + /* is the ECC cause by erase page, check using read_page_raw */ + debug(" Uncorrected ECC detected\n"); + denali_read_page_raw(mtd, chip, buf, oob_required, + denali->page); + + if (is_erased(buf, mtd->writesize) == true && + is_erased(chip->oob_poi, mtd->oobsize) == true) { + debug(" ECC error cause by erased block\n"); + /* false alarm, return the 0xFF */ + } else { + return -EIO; + } + } + memcpy(buf, denali->buf.dma_buf, mtd->writesize); + return 0; +} + +static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip, + int page) +{ + read_oob_data(mtd, chip->oob_poi, page); + + return 0; +} + +static uint8_t denali_read_byte(struct mtd_info *mtd) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t addr, result; + + addr = (uint32_t)MODE_11 | BANK(denali->flash_bank); + index_addr_read_data(denali, addr | 2, &result); + return (uint8_t)result & 0xFF; +} + +static void denali_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t i, addr, result; + + /* delay for tR (data transfer from Flash array to data register) */ + udelay(25); + + /* ensure device completed else additional delay and polling */ + wait_for_irq(denali, INTR_STATUS__INT_ACT); + + addr = (uint32_t)MODE_11 | BANK(denali->flash_bank); + for (i = 0; i < len; i++) { + index_addr_read_data(denali, (uint32_t)addr | 2, &result); + write_byte_to_buf(denali, result); + } + memcpy(buf, denali->buf.buf, len); +} + +static void denali_select_chip(struct mtd_info *mtd, int chip) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + + denali->flash_bank = chip; +} + +static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + int status = denali->status; + denali->status = 0; + + return status; +} + +static void denali_erase(struct mtd_info *mtd, int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t cmd, irq_status; + + /* clear interrupts */ + clear_interrupts(denali); + + /* setup page read request for access type */ + cmd = MODE_10 | BANK(denali->flash_bank) | page; + index_addr(denali, cmd, 0x1); + + /* wait for erase to complete or failure to occur */ + irq_status = wait_for_irq(denali, INTR_STATUS__ERASE_COMP | + INTR_STATUS__ERASE_FAIL); + + if (irq_status & INTR_STATUS__ERASE_FAIL || + irq_status & INTR_STATUS__LOCKED_BLK) + denali->status = NAND_STATUS_FAIL; + else + denali->status = 0; +} + +static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col, + int page) +{ + struct denali_nand_info *denali = mtd_to_denali(mtd); + uint32_t addr; + + switch (cmd) { + case NAND_CMD_PAGEPROG: + break; + case NAND_CMD_STATUS: + addr = MODE_11 | BANK(denali->flash_bank); + index_addr(denali, addr | 0, cmd); + break; + case NAND_CMD_PARAM: + clear_interrupts(denali); + case NAND_CMD_READID: + reset_buf(denali); + /* sometimes ManufactureId read from register is not right + * e.g. some of Micron MT29F32G08QAA MLC NAND chips + * So here we send READID cmd to NAND insteand + * */ + addr = MODE_11 | BANK(denali->flash_bank); + index_addr(denali, addr | 0, cmd); + index_addr(denali, addr | 1, col & 0xFF); + break; + case NAND_CMD_READ0: + case NAND_CMD_SEQIN: + denali->page = page; + break; + case NAND_CMD_RESET: + reset_bank(denali); + break; + case NAND_CMD_READOOB: + /* TODO: Read OOB data */ + break; + case NAND_CMD_ERASE1: + /* + * supporting block erase only, not multiblock erase as + * it will cross plane and software need complex calculation + * to identify the block count for the cross plane + */ + denali_erase(mtd, page); + break; + case NAND_CMD_ERASE2: + /* nothing to do here as it was done during NAND_CMD_ERASE1 */ + break; + case NAND_CMD_UNLOCK1: + addr = MODE_10 | BANK(denali->flash_bank) | page; + index_addr(denali, addr | 0, DENALI_UNLOCK_START); + break; + case NAND_CMD_UNLOCK2: + addr = MODE_10 | BANK(denali->flash_bank) | page; + index_addr(denali, addr | 0, DENALI_UNLOCK_END); + break; + case NAND_CMD_LOCK: + addr = MODE_10 | BANK(denali->flash_bank); + index_addr(denali, addr | 0, DENALI_LOCK); + break; + default: + printf(": unsupported command received 0x%x\n", cmd); + break; + } +} +/* end NAND core entry points */ + +/* Initialization code to bring the device up to a known good state */ +static void denali_hw_init(struct denali_nand_info *denali) +{ + /* + * tell driver how many bit controller will skip before writing + * ECC code in OOB. This is normally used for bad block marker + */ + writel(CONFIG_NAND_DENALI_SPARE_AREA_SKIP_BYTES, + denali->flash_reg + SPARE_AREA_SKIP_BYTES); + detect_max_banks(denali); + denali_nand_reset(denali); + writel(0x0F, denali->flash_reg + RB_PIN_ENABLED); + writel(CHIP_EN_DONT_CARE__FLAG, + denali->flash_reg + CHIP_ENABLE_DONT_CARE); + writel(0xffff, denali->flash_reg + SPARE_AREA_MARKER); + + /* Should set value for these registers when init */ + writel(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES); + writel(1, denali->flash_reg + ECC_ENABLE); + denali_nand_timing_set(denali); + denali_irq_init(denali); +} + +static struct nand_ecclayout nand_oob; + +static int denali_nand_init(struct nand_chip *nand) +{ + struct denali_nand_info *denali; + + denali = malloc(sizeof(*denali)); + if (!denali) + return -ENOMEM; + + nand->priv = denali; + + denali->flash_reg = (void __iomem *)CONFIG_SYS_NAND_REGS_BASE; + denali->flash_mem = (void __iomem *)CONFIG_SYS_NAND_DATA_BASE; + +#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT + /* check whether flash got BBT table (located at end of flash). As we + * use NAND_BBT_NO_OOB, the BBT page will start with + * bbt_pattern. We will have mirror pattern too */ + nand->bbt_options |= NAND_BBT_USE_FLASH; + /* + * We are using main + spare with ECC support. As BBT need ECC support, + * we need to ensure BBT code don't write to OOB for the BBT pattern. + * All BBT info will be stored into data area with ECC support. + */ + nand->bbt_options |= NAND_BBT_NO_OOB; +#endif + + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.size = CONFIG_NAND_DENALI_ECC_SIZE; + nand->ecc.read_oob = denali_read_oob; + nand->ecc.write_oob = denali_write_oob; + nand->ecc.read_page = denali_read_page; + nand->ecc.read_page_raw = denali_read_page_raw; + nand->ecc.write_page = denali_write_page; + nand->ecc.write_page_raw = denali_write_page_raw; + /* + * Tell driver the ecc strength. This register may be already set + * correctly. So we read this value out. + */ + nand->ecc.strength = readl(denali->flash_reg + ECC_CORRECTION); + switch (nand->ecc.size) { + case 512: + nand->ecc.bytes = (nand->ecc.strength * 13 + 15) / 16 * 2; + break; + case 1024: + nand->ecc.bytes = (nand->ecc.strength * 14 + 15) / 16 * 2; + break; + default: + pr_err("Unsupported ECC size\n"); + return -EINVAL; + } + nand_oob.eccbytes = nand->ecc.bytes; + nand->ecc.layout = &nand_oob; + + /* Set address of hardware control function */ + nand->cmdfunc = denali_cmdfunc; + nand->read_byte = denali_read_byte; + nand->read_buf = denali_read_buf; + nand->select_chip = denali_select_chip; + nand->waitfunc = denali_waitfunc; + denali_hw_init(denali); + return 0; +} + +int board_nand_init(struct nand_chip *chip) +{ + return denali_nand_init(chip); +} diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h new file mode 100644 index 0000000..3277da7 --- /dev/null +++ b/drivers/mtd/nand/denali.h @@ -0,0 +1,467 @@ +/* + * Copyright (C) 2013-2014 Altera Corporation <www.altera.com> + * Copyright (C) 2009-2010, Intel Corporation and its suppliers. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <linux/mtd/nand.h> + +#define DEVICE_RESET 0x0 +#define DEVICE_RESET__BANK0 0x0001 +#define DEVICE_RESET__BANK1 0x0002 +#define DEVICE_RESET__BANK2 0x0004 +#define DEVICE_RESET__BANK3 0x0008 + +#define TRANSFER_SPARE_REG 0x10 +#define TRANSFER_SPARE_REG__FLAG 0x0001 + +#define LOAD_WAIT_CNT 0x20 +#define LOAD_WAIT_CNT__VALUE 0xffff + +#define PROGRAM_WAIT_CNT 0x30 +#define PROGRAM_WAIT_CNT__VALUE 0xffff + +#define ERASE_WAIT_CNT 0x40 +#define ERASE_WAIT_CNT__VALUE 0xffff + +#define INT_MON_CYCCNT 0x50 +#define INT_MON_CYCCNT__VALUE 0xffff + +#define RB_PIN_ENABLED 0x60 +#define RB_PIN_ENABLED__BANK0 0x0001 +#define RB_PIN_ENABLED__BANK1 0x0002 +#define RB_PIN_ENABLED__BANK2 0x0004 +#define RB_PIN_ENABLED__BANK3 0x0008 + +#define MULTIPLANE_OPERATION 0x70 +#define MULTIPLANE_OPERATION__FLAG 0x0001 + +#define MULTIPLANE_READ_ENABLE 0x80 +#define MULTIPLANE_READ_ENABLE__FLAG 0x0001 + +#define COPYBACK_DISABLE 0x90 +#define COPYBACK_DISABLE__FLAG 0x0001 + +#define CACHE_WRITE_ENABLE 0xa0 +#define CACHE_WRITE_ENABLE__FLAG 0x0001 + +#define CACHE_READ_ENABLE 0xb0 +#define CACHE_READ_ENABLE__FLAG 0x0001 + +#define PREFETCH_MODE 0xc0 +#define PREFETCH_MODE__PREFETCH_EN 0x0001 +#define PREFETCH_MODE__PREFETCH_BURST_LENGTH 0xfff0 + +#define CHIP_ENABLE_DONT_CARE 0xd0 +#define CHIP_EN_DONT_CARE__FLAG 0x01 + +#define ECC_ENABLE 0xe0 +#define ECC_ENABLE__FLAG 0x0001 + +#define GLOBAL_INT_ENABLE 0xf0 +#define GLOBAL_INT_EN_FLAG 0x01 + +#define WE_2_RE 0x100 +#define WE_2_RE__VALUE 0x003f + +#define ADDR_2_DATA 0x110 +#define ADDR_2_DATA__VALUE 0x003f + +#define RE_2_WE 0x120 +#define RE_2_WE__VALUE 0x003f + +#define ACC_CLKS 0x130 +#define ACC_CLKS__VALUE 0x000f + +#define NUMBER_OF_PLANES 0x140 +#define NUMBER_OF_PLANES__VALUE 0x0007 + +#define PAGES_PER_BLOCK 0x150 +#define PAGES_PER_BLOCK__VALUE 0xffff + +#define DEVICE_WIDTH 0x160 +#define DEVICE_WIDTH__VALUE 0x0003 + +#define DEVICE_MAIN_AREA_SIZE 0x170 +#define DEVICE_MAIN_AREA_SIZE__VALUE 0xffff + +#define DEVICE_SPARE_AREA_SIZE 0x180 +#define DEVICE_SPARE_AREA_SIZE__VALUE 0xffff + +#define TWO_ROW_ADDR_CYCLES 0x190 +#define TWO_ROW_ADDR_CYCLES__FLAG 0x0001 + +#define MULTIPLANE_ADDR_RESTRICT 0x1a0 +#define MULTIPLANE_ADDR_RESTRICT__FLAG 0x0001 + +#define ECC_CORRECTION 0x1b0 +#define ECC_CORRECTION__VALUE 0x001f + +#define READ_MODE 0x1c0 +#define READ_MODE__VALUE 0x000f + +#define WRITE_MODE 0x1d0 +#define WRITE_MODE__VALUE 0x000f + +#define COPYBACK_MODE 0x1e0 +#define COPYBACK_MODE__VALUE 0x000f + +#define RDWR_EN_LO_CNT 0x1f0 +#define RDWR_EN_LO_CNT__VALUE 0x001f + +#define RDWR_EN_HI_CNT 0x200 +#define RDWR_EN_HI_CNT__VALUE 0x001f + +#define MAX_RD_DELAY 0x210 +#define MAX_RD_DELAY__VALUE 0x000f + +#define CS_SETUP_CNT 0x220 +#define CS_SETUP_CNT__VALUE 0x001f + +#define SPARE_AREA_SKIP_BYTES 0x230 +#define SPARE_AREA_SKIP_BYTES__VALUE 0x003f + +#define SPARE_AREA_MARKER 0x240 +#define SPARE_AREA_MARKER__VALUE 0xffff + +#define DEVICES_CONNECTED 0x250 +#define DEVICES_CONNECTED__VALUE 0x0007 + +#define DIE_MASK 0x260 +#define DIE_MASK__VALUE 0x00ff + +#define FIRST_BLOCK_OF_NEXT_PLANE 0x270 +#define FIRST_BLOCK_OF_NEXT_PLANE__VALUE 0xffff + +#define WRITE_PROTECT 0x280 +#define WRITE_PROTECT__FLAG 0x0001 + +#define RE_2_RE 0x290 +#define RE_2_RE__VALUE 0x003f + +#define MANUFACTURER_ID 0x300 +#define MANUFACTURER_ID__VALUE 0x00ff + +#define DEVICE_ID 0x310 +#define DEVICE_ID__VALUE 0x00ff + +#define DEVICE_PARAM_0 0x320 +#define DEVICE_PARAM_0__VALUE 0x00ff + +#define DEVICE_PARAM_1 0x330 +#define DEVICE_PARAM_1__VALUE 0x00ff + +#define DEVICE_PARAM_2 0x340 +#define DEVICE_PARAM_2__VALUE 0x00ff + +#define LOGICAL_PAGE_DATA_SIZE 0x350 +#define LOGICAL_PAGE_DATA_SIZE__VALUE 0xffff + +#define LOGICAL_PAGE_SPARE_SIZE 0x360 +#define LOGICAL_PAGE_SPARE_SIZE__VALUE 0xffff + +#define REVISION 0x370 +#define REVISION__VALUE 0xffff + +#define ONFI_DEVICE_FEATURES 0x380 +#define ONFI_DEVICE_FEATURES__VALUE 0x003f + +#define ONFI_OPTIONAL_COMMANDS 0x390 +#define ONFI_OPTIONAL_COMMANDS__VALUE 0x003f + +#define ONFI_TIMING_MODE 0x3a0 +#define ONFI_TIMING_MODE__VALUE 0x003f + +#define ONFI_PGM_CACHE_TIMING_MODE 0x3b0 +#define ONFI_PGM_CACHE_TIMING_MODE__VALUE 0x003f + +#define ONFI_DEVICE_NO_OF_LUNS 0x3c0 +#define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS 0x00ff +#define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE 0x0100 + +#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L 0x3d0 +#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE 0xffff + +#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U 0x3e0 +#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE 0xffff + +#define FEATURES 0x3f0 +#define FEATURES__N_BANKS 0x0003 +#define FEATURES__ECC_MAX_ERR 0x003c +#define FEATURES__DMA 0x0040 +#define FEATURES__CMD_DMA 0x0080 +#define FEATURES__PARTITION 0x0100 +#define FEATURES__XDMA_SIDEBAND 0x0200 +#define FEATURES__GPREG 0x0400 +#define FEATURES__INDEX_ADDR 0x0800 + +#define TRANSFER_MODE 0x400 +#define TRANSFER_MODE__VALUE 0x0003 + +#define INTR_STATUS(__bank) (0x410 + ((__bank) * 0x50)) +#define INTR_EN(__bank) (0x420 + ((__bank) * 0x50)) + +/* + * Some versions of the IP have the ECC fixup handled in hardware. In this + * configuration we only get interrupted when the error is uncorrectable. + * Unfortunately this bit replaces INTR_STATUS__ECC_TRANSACTION_DONE from the + * old IP. + */ +#define INTR_STATUS__ECC_UNCOR_ERR 0x0001 +#define INTR_STATUS__ECC_TRANSACTION_DONE 0x0001 +#define INTR_STATUS__ECC_ERR 0x0002 +#define INTR_STATUS__DMA_CMD_COMP 0x0004 +#define INTR_STATUS__TIME_OUT 0x0008 +#define INTR_STATUS__PROGRAM_FAIL 0x0010 +#define INTR_STATUS__ERASE_FAIL 0x0020 +#define INTR_STATUS__LOAD_COMP 0x0040 +#define INTR_STATUS__PROGRAM_COMP 0x0080 +#define INTR_STATUS__ERASE_COMP 0x0100 +#define INTR_STATUS__PIPE_CPYBCK_CMD_COMP 0x0200 +#define INTR_STATUS__LOCKED_BLK 0x0400 +#define INTR_STATUS__UNSUP_CMD 0x0800 +#define INTR_STATUS__INT_ACT 0x1000 +#define INTR_STATUS__RST_COMP 0x2000 +#define INTR_STATUS__PIPE_CMD_ERR 0x4000 +#define INTR_STATUS__PAGE_XFER_INC 0x8000 + +#define INTR_EN__ECC_TRANSACTION_DONE 0x0001 +#define INTR_EN__ECC_ERR 0x0002 +#define INTR_EN__DMA_CMD_COMP 0x0004 +#define INTR_EN__TIME_OUT 0x0008 +#define INTR_EN__PROGRAM_FAIL 0x0010 +#define INTR_EN__ERASE_FAIL 0x0020 +#define INTR_EN__LOAD_COMP 0x0040 +#define INTR_EN__PROGRAM_COMP 0x0080 +#define INTR_EN__ERASE_COMP 0x0100 +#define INTR_EN__PIPE_CPYBCK_CMD_COMP 0x0200 +#define INTR_EN__LOCKED_BLK 0x0400 +#define INTR_EN__UNSUP_CMD 0x0800 +#define INTR_EN__INT_ACT 0x1000 +#define INTR_EN__RST_COMP 0x2000 +#define INTR_EN__PIPE_CMD_ERR 0x4000 +#define INTR_EN__PAGE_XFER_INC 0x8000 + +#define PAGE_CNT(__bank) (0x430 + ((__bank) * 0x50)) +#define ERR_PAGE_ADDR(__bank) (0x440 + ((__bank) * 0x50)) +#define ERR_BLOCK_ADDR(__bank) (0x450 + ((__bank) * 0x50)) + +#define DATA_INTR 0x550 +#define DATA_INTR__WRITE_SPACE_AV 0x0001 +#define DATA_INTR__READ_DATA_AV 0x0002 + +#define DATA_INTR_EN 0x560 +#define DATA_INTR_EN__WRITE_SPACE_AV 0x0001 +#define DATA_INTR_EN__READ_DATA_AV 0x0002 + +#define GPREG_0 0x570 +#define GPREG_0__VALUE 0xffff + +#define GPREG_1 0x580 +#define GPREG_1__VALUE 0xffff + +#define GPREG_2 0x590 +#define GPREG_2__VALUE 0xffff + +#define GPREG_3 0x5a0 +#define GPREG_3__VALUE 0xffff + +#define ECC_THRESHOLD 0x600 +#define ECC_THRESHOLD__VALUE 0x03ff + +#define ECC_ERROR_BLOCK_ADDRESS 0x610 +#define ECC_ERROR_BLOCK_ADDRESS__VALUE 0xffff + +#define ECC_ERROR_PAGE_ADDRESS 0x620 +#define ECC_ERROR_PAGE_ADDRESS__VALUE 0x0fff +#define ECC_ERROR_PAGE_ADDRESS__BANK 0xf000 + +#define ECC_ERROR_ADDRESS 0x630 +#define ECC_ERROR_ADDRESS__OFFSET 0x0fff +#define ECC_ERROR_ADDRESS__SECTOR_NR 0xf000 + +#define ERR_CORRECTION_INFO 0x640 +#define ERR_CORRECTION_INFO__BYTEMASK 0x00ff +#define ERR_CORRECTION_INFO__DEVICE_NR 0x0f00 +#define ERR_CORRECTION_INFO__ERROR_TYPE 0x4000 +#define ERR_CORRECTION_INFO__LAST_ERR_INFO 0x8000 + +#define DMA_ENABLE 0x700 +#define DMA_ENABLE__FLAG 0x0001 + +#define IGNORE_ECC_DONE 0x710 +#define IGNORE_ECC_DONE__FLAG 0x0001 + +#define DMA_INTR 0x720 +#define DMA_INTR__TARGET_ERROR 0x0001 +#define DMA_INTR__DESC_COMP_CHANNEL0 0x0002 +#define DMA_INTR__DESC_COMP_CHANNEL1 0x0004 +#define DMA_INTR__DESC_COMP_CHANNEL2 0x0008 +#define DMA_INTR__DESC_COMP_CHANNEL3 0x0010 +#define DMA_INTR__MEMCOPY_DESC_COMP 0x0020 + +#define DMA_INTR_EN 0x730 +#define DMA_INTR_EN__TARGET_ERROR 0x0001 +#define DMA_INTR_EN__DESC_COMP_CHANNEL0 0x0002 +#define DMA_INTR_EN__DESC_COMP_CHANNEL1 0x0004 +#define DMA_INTR_EN__DESC_COMP_CHANNEL2 0x0008 +#define DMA_INTR_EN__DESC_COMP_CHANNEL3 0x0010 +#define DMA_INTR_EN__MEMCOPY_DESC_COMP 0x0020 + +#define TARGET_ERR_ADDR_LO 0x740 +#define TARGET_ERR_ADDR_LO__VALUE 0xffff + +#define TARGET_ERR_ADDR_HI 0x750 +#define TARGET_ERR_ADDR_HI__VALUE 0xffff + +#define CHNL_ACTIVE 0x760 +#define CHNL_ACTIVE__CHANNEL0 0x0001 +#define CHNL_ACTIVE__CHANNEL1 0x0002 +#define CHNL_ACTIVE__CHANNEL2 0x0004 +#define CHNL_ACTIVE__CHANNEL3 0x0008 + +#define ACTIVE_SRC_ID 0x800 +#define ACTIVE_SRC_ID__VALUE 0x00ff + +#define PTN_INTR 0x810 +#define PTN_INTR__CONFIG_ERROR 0x0001 +#define PTN_INTR__ACCESS_ERROR_BANK0 0x0002 +#define PTN_INTR__ACCESS_ERROR_BANK1 0x0004 +#define PTN_INTR__ACCESS_ERROR_BANK2 0x0008 +#define PTN_INTR__ACCESS_ERROR_BANK3 0x0010 +#define PTN_INTR__REG_ACCESS_ERROR 0x0020 + +#define PTN_INTR_EN 0x820 +#define PTN_INTR_EN__CONFIG_ERROR 0x0001 +#define PTN_INTR_EN__ACCESS_ERROR_BANK0 0x0002 +#define PTN_INTR_EN__ACCESS_ERROR_BANK1 0x0004 +#define PTN_INTR_EN__ACCESS_ERROR_BANK2 0x0008 +#define PTN_INTR_EN__ACCESS_ERROR_BANK3 0x0010 +#define PTN_INTR_EN__REG_ACCESS_ERROR 0x0020 + +#define PERM_SRC_ID(__bank) (0x830 + ((__bank) * 0x40)) +#define PERM_SRC_ID__SRCID 0x00ff +#define PERM_SRC_ID__DIRECT_ACCESS_ACTIVE 0x0800 +#define PERM_SRC_ID__WRITE_ACTIVE 0x2000 +#define PERM_SRC_ID__READ_ACTIVE 0x4000 +#define PERM_SRC_ID__PARTITION_VALID 0x8000 + +#define MIN_BLK_ADDR(__bank) (0x840 + ((__bank) * 0x40)) +#define MIN_BLK_ADDR__VALUE 0xffff + +#define MAX_BLK_ADDR(__bank) (0x850 + ((__bank) * 0x40)) +#define MAX_BLK_ADDR__VALUE 0xffff + +#define MIN_MAX_BANK(__bank) (0x860 + ((__bank) * 0x40)) +#define MIN_MAX_BANK__MIN_VALUE 0x0003 +#define MIN_MAX_BANK__MAX_VALUE 0x000c + +/* lld.h */ +#define GOOD_BLOCK 0 +#define DEFECTIVE_BLOCK 1 +#define READ_ERROR 2 + +#define CLK_X 5 +#define CLK_MULTI 4 + +/* spectraswconfig.h */ +#define CMD_DMA 0 + +#define SPECTRA_PARTITION_ID 0 +/**** Block Table and Reserved Block Parameters *****/ +#define SPECTRA_START_BLOCK 3 +#define NUM_FREE_BLOCKS_GATE 30 + +/* KBV - Updated to LNW scratch register address */ +#define SCRATCH_REG_ADDR CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR +#define SCRATCH_REG_SIZE 64 + +#define GLOB_HWCTL_DEFAULT_BLKS 2048 + +#define CUSTOM_CONF_PARAMS 0 + +#ifndef _LLD_NAND_ +#define _LLD_NAND_ + +#define INDEX_CTRL_REG 0x0 +#define INDEX_DATA_REG 0x10 + +#define MODE_00 0x00000000 +#define MODE_01 0x04000000 +#define MODE_10 0x08000000 +#define MODE_11 0x0C000000 + + +#define DATA_TRANSFER_MODE 0 +#define PROTECTION_PER_BLOCK 1 +#define LOAD_WAIT_COUNT 2 +#define PROGRAM_WAIT_COUNT 3 +#define ERASE_WAIT_COUNT 4 +#define INT_MONITOR_CYCLE_COUNT 5 +#define READ_BUSY_PIN_ENABLED 6 +#define MULTIPLANE_OPERATION_SUPPORT 7 +#define PRE_FETCH_MODE 8 +#define CE_DONT_CARE_SUPPORT 9 +#define COPYBACK_SUPPORT 10 +#define CACHE_WRITE_SUPPORT 11 +#define CACHE_READ_SUPPORT 12 +#define NUM_PAGES_IN_BLOCK 13 +#define ECC_ENABLE_SELECT 14 +#define WRITE_ENABLE_2_READ_ENABLE 15 +#define ADDRESS_2_DATA 16 +#define READ_ENABLE_2_WRITE_ENABLE 17 +#define TWO_ROW_ADDRESS_CYCLES 18 +#define MULTIPLANE_ADDRESS_RESTRICT 19 +#define ACC_CLOCKS 20 +#define READ_WRITE_ENABLE_LOW_COUNT 21 +#define READ_WRITE_ENABLE_HIGH_COUNT 22 + +#define ECC_SECTOR_SIZE 512 + +#define DENALI_BUF_SIZE (NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE) + +struct nand_buf { + int head; + int tail; + /* seprating dma_buf as buf can be used for status read purpose */ + uint8_t dma_buf[DENALI_BUF_SIZE] __aligned(64); + uint8_t buf[DENALI_BUF_SIZE]; +}; + +#define INTEL_CE4100 1 +#define INTEL_MRST 2 +#define DT 3 + +struct denali_nand_info { + struct mtd_info mtd; + struct nand_chip *nand; + + int flash_bank; /* currently selected chip */ + int status; + int platform; + struct nand_buf buf; + struct device *dev; + int total_used_banks; + uint32_t block; /* stored for future use */ + uint32_t page; + void __iomem *flash_reg; /* Mapped io reg base address */ + void __iomem *flash_mem; /* Mapped io reg base address */ + + /* elements used by ISR */ + /*struct completion complete;*/ + + uint32_t irq_status; + int irq_debug_array[32]; + int idx; + int irq; + + uint32_t devnum; /* represent how many nands connected */ + uint32_t fwblks; /* represent how many blocks FW used */ + uint32_t totalblks; + uint32_t blksperchip; + uint32_t bbtskipbytes; + uint32_t max_banks; +}; + +#endif /*_LLD_NAND_*/ diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 7153e3c..0b6e7ee 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -308,8 +308,7 @@ static void ioread16_rep(void *addr, void *buf, int len) { int i; u16 *p = (u16 *) buf; - len >>= 1; - + for (i = 0; i < len; i++) p[i] = readw(addr); } @@ -318,7 +317,6 @@ static void iowrite16_rep(void *addr, void *buf, int len) { int i; u16 *p = (u16 *) buf; - len >>= 1; for (i = 0; i < len; i++) writew(p[i], addr); diff --git a/drivers/mtd/spi/sf_params.c b/drivers/mtd/spi/sf_params.c index 856eb4c..453edf0 100644 --- a/drivers/mtd/spi/sf_params.c +++ b/drivers/mtd/spi/sf_params.c @@ -68,9 +68,12 @@ const struct spi_flash_params spi_flash_params_table[] = { {"M25P40", 0x202013, 0x0, 64 * 1024, 8, 0, 0}, {"M25P80", 0x202014, 0x0, 64 * 1024, 16, 0, 0}, {"M25P16", 0x202015, 0x0, 64 * 1024, 32, 0, 0}, + {"M25PE16", 0x208015, 0x1000, 64 * 1024, 32, 0, 0}, + {"M25PX16", 0x207115, 0x1000, 64 * 1024, 32, RD_EXTN, 0}, {"M25P32", 0x202016, 0x0, 64 * 1024, 64, 0, 0}, {"M25P64", 0x202017, 0x0, 64 * 1024, 128, 0, 0}, {"M25P128", 0x202018, 0x0, 256 * 1024, 64, 0, 0}, + {"M25PX64", 0x207117, 0x0, 64 * 1024, 128, 0, SECT_4K}, {"N25Q32", 0x20ba16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, {"N25Q32A", 0x20bb16, 0x0, 64 * 1024, 64, RD_FULL, WR_QPP | SECT_4K}, {"N25Q64", 0x20ba17, 0x0, 64 * 1024, 128, RD_FULL, WR_QPP | SECT_4K}, diff --git a/drivers/mtd/spi/spi_spl_load.c b/drivers/mtd/spi/spi_spl_load.c index 1954b7e..59cca0f 100644 --- a/drivers/mtd/spi/spi_spl_load.c +++ b/drivers/mtd/spi/spi_spl_load.c @@ -56,8 +56,10 @@ void spl_spi_load_image(void) * Load U-Boot image from SPI flash into RAM */ - flash = spi_flash_probe(CONFIG_SPL_SPI_BUS, CONFIG_SPL_SPI_CS, - CONFIG_SF_DEFAULT_SPEED, SPI_MODE_3); + flash = spi_flash_probe(CONFIG_SF_DEFAULT_BUS, + CONFIG_SF_DEFAULT_CS, + CONFIG_SF_DEFAULT_SPEED, + CONFIG_SF_DEFAULT_MODE); if (!flash) { puts("SPI probe failed.\n"); hang(); diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/net/Kconfig diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 0eba57c..6e8765c 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -5362,7 +5362,9 @@ e1000_initialize(bd_t * bis) hw->autoneg_failed = 0; hw->autoneg = 1; hw->get_link_status = true; +#ifndef CONFIG_E1000_NO_NVM hw->eeprom_semaphore_present = true; +#endif hw->hw_addr = pci_map_bar(devno, PCI_BASE_ADDRESS_0, PCI_REGION_MEM); hw->mac_type = e1000_undefined; diff --git a/drivers/net/fm/t1040.c b/drivers/net/fm/t1040.c index bcc871d..4cce46d 100644 --- a/drivers/net/fm/t1040.c +++ b/drivers/net/fm/t1040.c @@ -49,8 +49,6 @@ phy_interface_t fman_port_enet_if(enum fm_port port) else if ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) == FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_MII) return PHY_INTERFACE_MODE_MII; - else - return PHY_INTERFACE_MODE_NONE; } switch (port) { diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/pci/Kconfig diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/pcmcia/Kconfig diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/power/Kconfig diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/rtc/Kconfig diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/serial/Kconfig diff --git a/drivers/serial/usbtty.c b/drivers/serial/usbtty.c index b030526..7fb0b92 100644 --- a/drivers/serial/usbtty.c +++ b/drivers/serial/usbtty.c @@ -475,7 +475,7 @@ static void __usbtty_puts (const char *str, int len) if (space) { write_buffer (&usbtty_output); - n = MIN (space, MIN (len, maxlen)); + n = min(space, min(len, maxlen)); buf_push (&usbtty_output, str, n); str += n; @@ -882,7 +882,7 @@ static int write_buffer (circbuf_t * buf) space_avail = current_urb->buffer_length - current_urb->actual_length; - popnum = MIN (space_avail, buf->size); + popnum = min(space_avail, buf->size); if (popnum == 0) break; diff --git a/drivers/sound/Kconfig b/drivers/sound/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/sound/Kconfig diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/spi/Kconfig diff --git a/drivers/spi/kirkwood_spi.c b/drivers/spi/kirkwood_spi.c index 942a208..3d58bcc 100644 --- a/drivers/spi/kirkwood_spi.c +++ b/drivers/spi/kirkwood_spi.c @@ -18,7 +18,7 @@ static struct kwspi_registers *spireg = (struct kwspi_registers *)KW_SPI_BASE; -u32 cs_spi_mpp_back[2]; +static u32 cs_spi_mpp_back[2]; struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, unsigned int max_hz, unsigned int mode) @@ -37,7 +37,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!slave) return NULL; - writel(~KWSPI_CSN_ACT | KWSPI_SMEMRDY, &spireg->ctrl); + writel(KWSPI_SMEMRDY, &spireg->ctrl); /* calculate spi clock prescaller using max_hz */ data = ((CONFIG_SYS_TCLK / 2) / max_hz) + 0x10; @@ -46,7 +46,7 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, /* program spi clock prescaller using max_hz */ writel(KWSPI_ADRLEN_3BYTE | data, &spireg->cfg); - debug("data = 0x%08x \n", data); + debug("data = 0x%08x\n", data); writel(KWSPI_SMEMRDIRQ, &spireg->irq_cause); writel(KWSPI_IRQMASK, &spireg->irq_mask); @@ -100,7 +100,6 @@ int spi_claim_bus(struct spi_slave *slave) /* set new spi mpp and save current mpp config */ kirkwood_mpp_conf(spi_mpp_config, spi_mpp_backup); - #endif return board_spi_claim_bus(slave); @@ -127,7 +126,7 @@ void spi_release_bus(struct spi_slave *slave) */ int spi_cs_is_valid(unsigned int bus, unsigned int cs) { - return (bus == 0 && (cs == 0 || cs == 1)); + return bus == 0 && (cs == 0 || cs == 1); } #endif @@ -137,12 +136,12 @@ void spi_init(void) void spi_cs_activate(struct spi_slave *slave) { - writel(readl(&spireg->ctrl) | KWSPI_IRQUNMASK, &spireg->ctrl); + setbits_le32(&spireg->ctrl, KWSPI_CSN_ACT); } void spi_cs_deactivate(struct spi_slave *slave) { - writel(readl(&spireg->ctrl) & KWSPI_IRQMASK, &spireg->ctrl); + clrbits_le32(&spireg->ctrl, KWSPI_CSN_ACT); } int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, @@ -161,8 +160,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, * handle data in 8-bit chunks * TBD: 2byte xfer mode to be enabled */ - writel(((readl(&spireg->cfg) & ~KWSPI_XFERLEN_MASK) | - KWSPI_XFERLEN_1BYTE), &spireg->cfg); + clrsetbits_le32(&spireg->cfg, KWSPI_XFERLEN_MASK, KWSPI_XFERLEN_1BYTE); while (bitlen > 4) { debug("loopstart bitlen %d\n", bitlen); @@ -170,9 +168,9 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, /* Shift data so it's msb-justified */ if (dout) - tmpdout = *(u32 *) dout & 0x0ff; + tmpdout = *(u32 *)dout & 0xff; - writel(~KWSPI_SMEMRDIRQ, &spireg->irq_cause); + clrbits_le32(&spireg->irq_cause, KWSPI_SMEMRDIRQ); writel(tmpdout, &spireg->dout); /* Write the data out */ debug("*** spi_xfer: ... %08x written, bitlen %d\n", tmpdout, bitlen); @@ -186,12 +184,11 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, if (readl(&spireg->irq_cause) & KWSPI_SMEMRDIRQ) { isread = 1; tmpdin = readl(&spireg->din); - debug - ("spi_xfer: din %p..%08x read\n", - din, tmpdin); + debug("spi_xfer: din %p..%08x read\n", + din, tmpdin); if (din) { - *((u8 *) din) = (u8) tmpdin; + *((u8 *)din) = (u8)tmpdin; din += 1; } if (dout) diff --git a/drivers/spi/mxc_spi.c b/drivers/spi/mxc_spi.c index 2d5f385..026f680 100644 --- a/drivers/spi/mxc_spi.c +++ b/drivers/spi/mxc_spi.c @@ -25,6 +25,11 @@ static unsigned long spi_bases[] = { MXC_SPI_BASE_ADDRESSES }; +__weak int board_spi_cs_gpio(unsigned bus, unsigned cs) +{ + return -1; +} + #define OUT MXC_GPIO_DIRECTION_OUT #define reg_read readl @@ -371,31 +376,30 @@ void spi_init(void) { } -static int decode_cs(struct mxc_spi_slave *mxcs, unsigned int cs) +/* + * Some SPI devices require active chip-select over multiple + * transactions, we achieve this using a GPIO. Still, the SPI + * controller has to be configured to use one of its own chipselects. + * To use this feature you have to implement board_spi_cs_gpio() to assign + * a gpio value for each cs (-1 if cs doesn't need to use gpio). + * You must use some unused on this SPI controller cs between 0 and 3. + */ +static int setup_cs_gpio(struct mxc_spi_slave *mxcs, + unsigned int bus, unsigned int cs) { int ret; - /* - * Some SPI devices require active chip-select over multiple - * transactions, we achieve this using a GPIO. Still, the SPI - * controller has to be configured to use one of its own chipselects. - * To use this feature you have to call spi_setup_slave() with - * cs = internal_cs | (gpio << 8), and you have to use some unused - * on this SPI controller cs between 0 and 3. - */ - if (cs > 3) { - mxcs->gpio = cs >> 8; - cs &= 3; - ret = gpio_direction_output(mxcs->gpio, !(mxcs->ss_pol)); - if (ret) { - printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio); - return -EINVAL; - } - } else { - mxcs->gpio = -1; + mxcs->gpio = board_spi_cs_gpio(bus, cs); + if (mxcs->gpio == -1) + return 0; + + ret = gpio_direction_output(mxcs->gpio, !(mxcs->ss_pol)); + if (ret) { + printf("mxc_spi: cannot setup gpio %d\n", mxcs->gpio); + return -EINVAL; } - return cs; + return 0; } struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, @@ -415,14 +419,12 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, mxcs->ss_pol = (mode & SPI_CS_HIGH) ? 1 : 0; - ret = decode_cs(mxcs, cs); + ret = setup_cs_gpio(mxcs, bus, cs); if (ret < 0) { free(mxcs); return NULL; } - cs = ret; - mxcs->base = spi_bases[bus]; ret = spi_cfg_mxc(mxcs, cs, max_hz, mode); diff --git a/drivers/tpm/Kconfig b/drivers/tpm/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/tpm/Kconfig diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/usb/Kconfig diff --git a/drivers/usb/gadget/designware_udc.c b/drivers/usb/gadget/designware_udc.c index b7c1038..3559400 100644 --- a/drivers/usb/gadget/designware_udc.c +++ b/drivers/usb/gadget/designware_udc.c @@ -269,7 +269,7 @@ static void dw_write_noniso_tx_fifo(struct usb_endpoint_instance UDCDBGA("urb->buffer %p, buffer_length %d, actual_length %d", urb->buffer, urb->buffer_length, urb->actual_length); - last = MIN(urb->actual_length - endpoint->sent, + last = min(urb->actual_length - endpoint->sent, endpoint->tx_packetSize); if (last) { @@ -285,7 +285,7 @@ static void dw_write_noniso_tx_fifo(struct usb_endpoint_instance align = ((ulong)cp % sizeof(int)); if (align) - last = MIN(last, sizeof(int) - align); + last = min(last, sizeof(int) - align); UDCDBGA("endpoint->sent %d, tx_packetSize %d, last %d", endpoint->sent, endpoint->tx_packetSize, last); diff --git a/drivers/usb/gadget/ep0.c b/drivers/usb/gadget/ep0.c index b321488..4ba2f3d 100644 --- a/drivers/usb/gadget/ep0.c +++ b/drivers/usb/gadget/ep0.c @@ -315,7 +315,7 @@ static int ep0_get_descriptor (struct usb_device_instance *device, /*copy_config(urb, &report_descriptor->bData[0], report_descriptor->wLength, max); */ if (max - urb->actual_length > 0) { int length = - MIN (report_descriptor->wLength, + min(report_descriptor->wLength, max - urb->actual_length); memcpy (urb->buffer + urb->actual_length, &report_descriptor->bData[0], length); diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c index 7a1acb9..38c0965 100644 --- a/drivers/usb/gadget/f_fastboot.c +++ b/drivers/usb/gadget/f_fastboot.c @@ -10,6 +10,7 @@ * * SPDX-License-Identifier: GPL-2.0+ */ +#include <config.h> #include <common.h> #include <errno.h> #include <malloc.h> @@ -19,6 +20,9 @@ #include <linux/compiler.h> #include <version.h> #include <g_dnl.h> +#ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV +#include <fb_mmc.h> +#endif #define FASTBOOT_VERSION "0.4" @@ -38,7 +42,7 @@ struct f_fastboot { struct usb_function usb_function; - /* IN/OUT EP's and correspoinding requests */ + /* IN/OUT EP's and corresponding requests */ struct usb_ep *in_ep, *out_ep; struct usb_request *in_req, *out_req; }; @@ -290,7 +294,7 @@ static int fastboot_add(struct usb_configuration *c) } DECLARE_GADGET_BIND_CALLBACK(usb_dnl_fastboot, fastboot_add); -int fastboot_tx_write(const char *buffer, unsigned int buffer_size) +static int fastboot_tx_write(const char *buffer, unsigned int buffer_size) { struct usb_request *in_req = fastboot_func->in_req; int ret; @@ -338,6 +342,7 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req) strsep(&cmd, ":"); if (!cmd) { + error("missing variable\n"); fastboot_tx_write_str("FAILmissing var"); return; } @@ -358,6 +363,7 @@ static void cb_getvar(struct usb_ep *ep, struct usb_request *req) else strcpy(response, "FAILValue not set"); } else { + error("unknown variable: %s\n", cmd); strcpy(response, "FAILVariable not implemented"); } fastboot_tx_write_str(response); @@ -469,6 +475,28 @@ static void cb_boot(struct usb_ep *ep, struct usb_request *req) fastboot_tx_write_str("OKAY"); } +#ifdef CONFIG_FASTBOOT_FLASH +static void cb_flash(struct usb_ep *ep, struct usb_request *req) +{ + char *cmd = req->buf; + char response[RESPONSE_LEN]; + + strsep(&cmd, ":"); + if (!cmd) { + error("missing partition name\n"); + fastboot_tx_write_str("FAILmissing partition name"); + return; + } + + strcpy(response, "FAILno flash device defined"); +#ifdef CONFIG_FASTBOOT_FLASH_MMC_DEV + fb_mmc_flash_write(cmd, (void *)CONFIG_USB_FASTBOOT_BUF_ADDR, + download_bytes, response); +#endif + fastboot_tx_write_str(response); +} +#endif + struct cmd_dispatch_info { char *cmd; void (*cb)(struct usb_ep *ep, struct usb_request *req); @@ -488,6 +516,12 @@ static const struct cmd_dispatch_info cmd_dispatch_info[] = { .cmd = "boot", .cb = cb_boot, }, +#ifdef CONFIG_FASTBOOT_FLASH + { + .cmd = "flash", + .cb = cb_flash, + }, +#endif }; static void rx_handler_command(struct usb_ep *ep, struct usb_request *req) @@ -503,10 +537,12 @@ static void rx_handler_command(struct usb_ep *ep, struct usb_request *req) } } - if (!func_cb) + if (!func_cb) { + error("unknown command: %s\n", cmdbuf); fastboot_tx_write_str("FAILunknown command"); - else + } else { func_cb(ep, req); + } if (req->status == 0) { *cmdbuf = '\0'; diff --git a/drivers/usb/gadget/mpc8xx_udc.c b/drivers/usb/gadget/mpc8xx_udc.c index 7f72972..b3e178a 100644 --- a/drivers/usb/gadget/mpc8xx_udc.c +++ b/drivers/usb/gadget/mpc8xx_udc.c @@ -897,7 +897,7 @@ static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi) pkt_len = urb->actual_length - epi->sent; if (pkt_len > epi->tx_packetSize || pkt_len > EP_MAX_PKT) { - pkt_len = MIN (epi->tx_packetSize, EP_MAX_PKT); + pkt_len = min(epi->tx_packetSize, EP_MAX_PKT); } for (x = 0; x < pkt_len; x++) { @@ -942,7 +942,7 @@ static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi) /* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */ epi->sent += pkt_len; - epi->last = MIN (urb->actual_length - epi->sent, epi->tx_packetSize); + epi->last = min(urb->actual_length - epi->sent, epi->tx_packetSize); TOGGLE_TX_PID (ep_ref[ep].pid); if (epi->sent >= epi->tx_urb->actual_length) { diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 733558d..efd5c7f 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -65,7 +65,7 @@ static int udc_write_urb(struct usb_endpoint_instance *endpoint) if (!urb || !urb->actual_length) return -1; - n = MIN(urb->actual_length - endpoint->sent, endpoint->tx_packetSize); + n = min(urb->actual_length - endpoint->sent, endpoint->tx_packetSize); if (n <= 0) return -1; diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/video/Kconfig diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/drivers/watchdog/Kconfig diff --git a/dts/Kconfig b/dts/Kconfig new file mode 100644 index 0000000..83ba7a6 --- /dev/null +++ b/dts/Kconfig @@ -0,0 +1,55 @@ +# +# Device Tree Control +# +# TODO: +# This feature is not currently supported for SPL, +# but this restriction should be removed in the future. + +config SUPPORT_OF_CONTROL + bool + +menu "Device Tree Control" + depends on !SPL_BUILD + depends on SUPPORT_OF_CONTROL + +config OF_CONTROL + bool "Run-time configuration via Device Tree" + help + This feature provides for run-time configuration of U-Boot + via a flattened device tree. + +choice + prompt "Provider of DTB for DT control" + depends on OF_CONTROL + +config OF_SEPARATE + bool "Separate DTB for DT control" + depends on !SANDBOX + help + If this option is enabled, the device tree will be built and + placed as a separate u-boot.dtb file alongside the U-Boot image. + +config OF_EMBED + bool "Embedded DTB for DT control" + help + If this option is enabled, the device tree will be picked up and + built into the U-Boot image. + +config OF_HOSTFILE + bool "Host filed DTB for DT control" + depends on SANDBOX + help + If this option is enabled, DTB will be read from a file on startup. + This is only useful for Sandbox. Use the -d flag to U-Boot to + specify the file to read. + +endchoice + +config DEFAULT_DEVICE_TREE + string "Default Device Tree for DT control" + help + This option specifies the default Device Tree used for DT control. + It can be overrided from the command line: + $ make DEVICE_TREE=<device-tree-name> + +endmenu diff --git a/fs/Kconfig b/fs/Kconfig new file mode 100644 index 0000000..41bb0b9 --- /dev/null +++ b/fs/Kconfig @@ -0,0 +1,19 @@ +# +# File system configuration +# + +menu "File systems" + +source "fs/ext4/Kconfig" + +source "fs/reiserfs/Kconfig" + +source "fs/fat/Kconfig" + +source "fs/jffs2/Kconfig" + +source "fs/ubifs/Kconfig" + +source "fs/cramfs/Kconfig" + +endmenu diff --git a/fs/cramfs/Kconfig b/fs/cramfs/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/fs/cramfs/Kconfig diff --git a/fs/ext4/Kconfig b/fs/ext4/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/fs/ext4/Kconfig diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/fs/fat/Kconfig diff --git a/fs/jffs2/Kconfig b/fs/jffs2/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/fs/jffs2/Kconfig diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/fs/reiserfs/Kconfig diff --git a/fs/ubifs/Kconfig b/fs/ubifs/Kconfig new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/fs/ubifs/Kconfig diff --git a/fs/zfs/zfs.c b/fs/zfs/zfs.c index 099d517..818d3d9 100644 --- a/fs/zfs/zfs.c +++ b/fs/zfs/zfs.c @@ -772,7 +772,7 @@ zap_leaf_array_equal(zap_leaf_phys_t *l, zfs_endian_t endian, while (bseen < array_len) { struct zap_leaf_array *la = &ZAP_LEAF_CHUNK(l, blksft, chunk).l_array; - int toread = MIN(array_len - bseen, ZAP_LEAF_ARRAY_BYTES); + int toread = min(array_len - bseen, ZAP_LEAF_ARRAY_BYTES); if (chunk >= ZAP_LEAF_NUMCHUNKS(blksft)) return 0; @@ -794,7 +794,7 @@ zap_leaf_array_get(zap_leaf_phys_t *l, zfs_endian_t endian, int blksft, while (bseen < array_len) { struct zap_leaf_array *la = &ZAP_LEAF_CHUNK(l, blksft, chunk).l_array; - int toread = MIN(array_len - bseen, ZAP_LEAF_ARRAY_BYTES); + int toread = min(array_len - bseen, ZAP_LEAF_ARRAY_BYTES); if (chunk >= ZAP_LEAF_NUMCHUNKS(blksft)) /* Don't use errno because this error is to be ignored. */ @@ -2118,7 +2118,7 @@ zfs_read(zfs_file_t file, char *buf, uint64_t len) data->file_start = blkid * blksz; data->file_end = data->file_start + blksz; - movesize = MIN(length, data->file_end - (int) file->offset - red); + movesize = min(length, data->file_end - (int)file->offset - red); memmove(buf, data->file_buf + file->offset + red - data->file_start, movesize); diff --git a/include/common.h b/include/common.h index 97c04df..d5020c8 100644 --- a/include/common.h +++ b/include/common.h @@ -181,9 +181,6 @@ typedef void (interrupt_handler_t)(void *); typeof(Y) __y = (Y); \ (__x > __y) ? __x : __y; }) -#define MIN(x, y) min(x, y) -#define MAX(x, y) max(x, y) - #define min3(X, Y, Z) \ ({ typeof(X) __x = (X); \ typeof(Y) __y = (Y); \ @@ -198,9 +195,6 @@ typedef void (interrupt_handler_t)(void *); __x > __y ? (__x > __z ? __x : __z) : \ (__y > __z ? __y : __z); }) -#define MIN3(x, y, z) min3(x, y, z) -#define MAX3(x, y, z) max3(x, y, z) - /* * Return the absolute value of a number. * diff --git a/include/compiler.h b/include/compiler.h index 9afc11b..1451916 100644 --- a/include/compiler.h +++ b/include/compiler.h @@ -129,9 +129,6 @@ typedef unsigned long int uintptr_t; #endif /* USE_HOSTCC */ -/* compiler options */ -#define uninitialized_var(x) x = x - #define likely(x) __builtin_expect(!!(x), 1) #define unlikely(x) __builtin_expect(!!(x), 0) diff --git a/include/config_cmd_defaults.h b/include/config_cmd_defaults.h deleted file mode 100644 index a55b268..0000000 --- a/include/config_cmd_defaults.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * config_cmd_defaults.h - sane defaults for everyone - * - * Copyright (c) 2010-2011 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef _CONFIG_CMD_DEFAULTS_H_ -#define _CONFIG_CMD_DEFAULTS_H_ - -#define CONFIG_CMD_BOOTM 1 -#define CONFIG_CMD_CRC32 1 -#define CONFIG_CMD_EXPORTENV 1 -#define CONFIG_CMD_GO 1 -#define CONFIG_CMD_IMPORTENV 1 - -#endif diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h index 90d9901..be616e8 100644 --- a/include/config_distro_bootcmd.h +++ b/include/config_distro_bootcmd.h @@ -53,10 +53,23 @@ #endif #ifdef CONFIG_CMD_SCSI -#define BOOTENV_SHARED_SCSI BOOTENV_SHARED_BLKDEV(scsi) +#define BOOTENV_RUN_SCSI_INIT "run scsi_init; " +#define BOOTENV_SET_SCSI_NEED_INIT "setenv scsi_need_init; " +#define BOOTENV_SHARED_SCSI \ + "scsi_init=" \ + "if ${scsi_need_init}; then " \ + "setenv scsi_need_init false; " \ + "scsi scan; " \ + "fi\0" \ + \ + "scsi_boot=" \ + BOOTENV_RUN_SCSI_INIT \ + BOOTENV_SHARED_BLKDEV_BODY(scsi) #define BOOTENV_DEV_SCSI BOOTENV_DEV_BLKDEV #define BOOTENV_DEV_NAME_SCSI BOOTENV_DEV_NAME_BLKDEV #else +#define BOOTENV_RUN_SCSI_INIT +#define BOOTENV_SET_SCSI_NEED_INIT #define BOOTENV_SHARED_SCSI #define BOOTENV_DEV_SCSI \ BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI @@ -189,7 +202,7 @@ \ BOOT_TARGET_DEVICES(BOOTENV_DEV) \ \ - "bootcmd=" BOOTENV_SET_USB_NEED_INIT \ + "bootcmd=" BOOTENV_SET_USB_NEED_INIT BOOTENV_SET_SCSI_NEED_INIT \ "for target in ${boot_targets}; do " \ "run bootcmd_${target}; " \ "done\0" diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 953d06b..9063c57 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -227,6 +227,7 @@ unsigned long get_board_ddr_clk(void); #endif /* EEPROM */ +#define CONFIG_ID_EEPROM #define CONFIG_SYS_I2C_EEPROM_NXID #define CONFIG_SYS_EEPROM_BUS_NUM 0 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 @@ -819,9 +820,16 @@ unsigned long get_board_ddr_clk(void); #define __USB_PHY_TYPE ulpi +#ifdef CONFIG_PPC_B4860 +#define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null," \ + "bank_intlv=cs0_cs1;" \ + "en_cpc:cpc2;" +#else +#define HWCONFIG "hwconfig=fsl_ddr:ctlr_intlv=null,bank_intlv=cs0_cs1;" +#endif + #define CONFIG_EXTRA_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=null," \ - "bank_intlv=cs0_cs1;" \ + HWCONFIG \ "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ "netdev=eth0\0" \ "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 0ee0ff2..5e2c100 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -19,6 +19,9 @@ #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1040_rcw.cfg #endif #ifdef CONFIG_T1042RDB_PI +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_pi_rcw.cfg +#endif +#ifdef CONFIG_T1042RDB #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t104xrdb/t1042_rcw.cfg #endif @@ -477,7 +480,7 @@ /* I2C bus multiplexer */ #define I2C_MUX_PCA_ADDR 0x70 -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #define I2C_MUX_CH_DEFAULT 0x8 #endif @@ -503,6 +506,7 @@ #define CONFIG_FSL_ESPI #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_STMICRO +#define CONFIG_SPI_FLASH_BAR #define CONFIG_CMD_SF #define CONFIG_SF_DEFAULT_SPEED 10000000 #define CONFIG_SF_DEFAULT_MODE 0 @@ -633,7 +637,7 @@ #define CONFIG_SYS_DPAA_FMAN #define CONFIG_SYS_DPAA_PME -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #define CONFIG_QE #define CONFIG_U_QE #endif @@ -662,7 +666,7 @@ #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 #endif -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #if defined(CONFIG_SPIFLASH) #define CONFIG_SYS_QE_FW_ADDR 0x130000 #elif defined(CONFIG_SDCARD) @@ -686,7 +690,7 @@ #endif #ifdef CONFIG_FMAN_ENET -#ifdef CONFIG_T1040RDB +#if defined(CONFIG_T1040RDB) || defined(CONFIG_T1042RDB) #define CONFIG_SYS_SGMII1_PHY_ADDR 0x03 #endif #define CONFIG_SYS_RGMII1_PHY_ADDR 0x01 @@ -788,13 +792,14 @@ #define CONFIG_BAUDRATE 115200 #define __USB_PHY_TYPE utmi +#define RAMDISKFILE "t104xrdb/ramdisk.uboot" #ifdef CONFIG_T1040RDB #define FDTFILE "t1040rdb/t1040rdb.dtb" -#define RAMDISKFILE "t1040rdb/ramdisk.uboot" -#elif CONFIG_T1042RDB_PI -#define FDTFILE "t1040rdb_pi/t1040rdb_pi.dtb" -#define RAMDISKFILE "t1040rdb_pi/ramdisk.uboot" +#elif defined(CONFIG_T1042RDB_PI) +#define FDTFILE "t1042rdb_pi/t1042rdb_pi.dtb" +#elif defined(CONFIG_T1042RDB) +#define FDTFILE "t1042rdb/t1042rdb.dtb" #endif #ifdef CONFIG_FSL_DIU_FB diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index aef0ad3..e2f7ead 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -23,9 +23,6 @@ # define CONFIG_TIMESTAMP # define CONFIG_LZO # ifdef CONFIG_ENABLE_VBOOT -# define CONFIG_OF_CONTROL -# define CONFIG_OF_SEPARATE -# define CONFIG_DEFAULT_DEVICE_TREE am335x-boneblack # define CONFIG_FIT_SIGNATURE # define CONFIG_RSA # endif @@ -405,8 +402,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/arndale.h b/include/configs/arndale.h index 75f9933..43077cf 100644 --- a/include/configs/arndale.h +++ b/include/configs/arndale.h @@ -22,8 +22,6 @@ #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE /* Allow tracing to be enabled */ #define CONFIG_TRACE @@ -226,7 +224,6 @@ #define CONFIG_POWER_I2C #define CONFIG_POWER_MAX77686 -#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-arndale #define CONFIG_PREBOOT diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index c1eda96..d0828d5 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -137,7 +137,6 @@ #define CONFIG_MTD_DEVICE #define CONFIG_MTD_PARTITIONS #define CONFIG_SYS_HUSH_PARSER -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/beaver.h b/include/configs/beaver.h index d8ed717..164b2dd 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -24,11 +24,6 @@ /* VDD core PMIC */ #define CONFIG_TEGRA_VDD_CORE_TPS62366A_SET1 -/* Enable fdt support for Beaver. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-beaver -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra30 (Beaver) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Beaver" diff --git a/include/configs/bf506f-ezkit.h b/include/configs/bf506f-ezkit.h index 5db1819..0b66cdb 100644 --- a/include/configs/bf506f-ezkit.h +++ b/include/configs/bf506f-ezkit.h @@ -85,8 +85,6 @@ */ #define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_SIZE 0x400 -#undef CONFIG_CMD_EXPORTENV -#undef CONFIG_CMD_IMPORTENV /* @@ -102,7 +100,6 @@ #define CONFIG_CMD_MEMORY #undef CONFIG_GZIP #undef CONFIG_ZLIB -#undef CONFIG_CMD_BOOTM #undef CONFIG_BOOTM_RTEMS #undef CONFIG_BOOTM_LINUX diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 9e374c4..20f6ed1 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -155,7 +155,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 972eca9..c33d035 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -153,7 +153,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* define to enable run status via led */ /* #define CONFIG_STATUS_LED */ diff --git a/include/configs/bf527-ad7160-eval.h b/include/configs/bf527-ad7160-eval.h index c0dfe26..b497f26 100644 --- a/include/configs/bf527-ad7160-eval.h +++ b/include/configs/bf527-ad7160-eval.h @@ -136,7 +136,6 @@ */ #define CONFIG_MISC_INIT_R #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 92c183e..0bca53f 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -179,7 +179,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf527-sdp.h b/include/configs/bf527-sdp.h index 458868a..9d43b81 100644 --- a/include/configs/bf527-sdp.h +++ b/include/configs/bf527-sdp.h @@ -112,7 +112,6 @@ */ #define CONFIG_MISC_INIT_R #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf533-ezkit.h b/include/configs/bf533-ezkit.h index b503528..0fda967 100644 --- a/include/configs/bf533-ezkit.h +++ b/include/configs/bf533-ezkit.h @@ -110,7 +110,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf533-stamp.h b/include/configs/bf533-stamp.h index 3d36d84..ae4d83a 100644 --- a/include/configs/bf533-stamp.h +++ b/include/configs/bf533-stamp.h @@ -186,7 +186,6 @@ */ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* FLASH/ETHERNET uses the same async bank */ #define SHARED_RESOURCES 1 diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index a302f83..29f9316 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -254,7 +254,6 @@ #define CONFIG_MISC_INIT_R #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* Define if want to do post memory test */ #undef CONFIG_POST diff --git a/include/configs/bf538f-ezkit.h b/include/configs/bf538f-ezkit.h index 32df5ec..a655282 100644 --- a/include/configs/bf538f-ezkit.h +++ b/include/configs/bf538f-ezkit.h @@ -135,7 +135,6 @@ */ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h index 1a245a2..da5f029 100644 --- a/include/configs/bf548-ezkit.h +++ b/include/configs/bf548-ezkit.h @@ -181,7 +181,6 @@ #define CONFIG_RTC_BFIN #define CONFIG_UART_CONSOLE 1 #define CONFIG_BFIN_SPI_IMG_SIZE 0x50000 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #define CONFIG_ADI_GPIO2 diff --git a/include/configs/bf561-acvilon.h b/include/configs/bf561-acvilon.h index 3db917e..6871d8c 100644 --- a/include/configs/bf561-acvilon.h +++ b/include/configs/bf561-acvilon.h @@ -160,7 +160,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BAUDRATE 57600 #define CONFIG_SYS_PROMPT "Acvilon> " -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bf561-ezkit.h b/include/configs/bf561-ezkit.h index 0a309d9..fb6f948 100644 --- a/include/configs/bf561-ezkit.h +++ b/include/configs/bf561-ezkit.h @@ -102,7 +102,6 @@ * Misc Settings */ #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Run core 1 from L1 SRAM start address when init uboot on core 0 diff --git a/include/configs/br4.h b/include/configs/br4.h index f8d3158..3f24008 100644 --- a/include/configs/br4.h +++ b/include/configs/br4.h @@ -135,7 +135,6 @@ #define CONFIG_BOOTCOMMAND "run nandboot" #define CONFIG_BOOTDELAY 2 #define CONFIG_LOADADDR 0x2000000 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h index 3f889f8..e9d5d01 100644 --- a/include/configs/bur_am335x_common.h +++ b/include/configs/bur_am335x_common.h @@ -151,7 +151,6 @@ #undef CONFIG_CMD_NFS #undef CONFIG_CMD_SETGETDCR #undef CONFIG_CMD_XIMG -#undef CONFIG_CMD_CRC32 /* define command we need always */ #define CONFIG_CMD_ECHO #define CONFIG_CMD_SOURCE diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 59f429c..09129c7 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -24,11 +24,6 @@ /* VDD core PMIC */ #define CONFIG_TEGRA_VDD_CORE_TPS62361B_SET3 -/* Enable fdt support for Cardhu. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-cardhu -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra30 (Cardhu) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Cardhu" diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index 8d3ae49..f5351ad 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -128,7 +128,6 @@ #define FLASHBOOT_ENV_SETTINGS \ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf533.h b/include/configs/cm-bf533.h index 8bd499a..485f01a 100644 --- a/include/configs/cm-bf533.h +++ b/include/configs/cm-bf533.h @@ -97,7 +97,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 47967d7..1729b44 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -146,7 +146,6 @@ "flashboot=flread 20040000 1000000 3c0000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index 88c9982..272aa74 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -143,7 +143,6 @@ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/cm-bf548.h b/include/configs/cm-bf548.h index 346e27f..7f27eda 100644 --- a/include/configs/cm-bf548.h +++ b/include/configs/cm-bf548.h @@ -117,7 +117,6 @@ #define CONFIG_UART_CONSOLE 1 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #define CONFIG_ADI_GPIO2 diff --git a/include/configs/cm-bf561.h b/include/configs/cm-bf561.h index 5265e5f..96910a7 100644 --- a/include/configs/cm-bf561.h +++ b/include/configs/cm-bf561.h @@ -99,7 +99,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h index 6f9e08c..2b876fe 100644 --- a/include/configs/colibri_t20_iris.h +++ b/include/configs/colibri_t20_iris.h @@ -9,11 +9,6 @@ #include "tegra20-common.h" -/* Enable FDT support */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-colibri_t20_iris -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Colibri) # " #define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T20 on Iris" diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h index eacff5b..782b9d1 100644 --- a/include/configs/colibri_t30.h +++ b/include/configs/colibri_t30.h @@ -11,9 +11,6 @@ #include "tegra30-common.h" -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-colibri -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE #define V_PROMPT "Colibri T30 # " #define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T30" diff --git a/include/configs/controlcenterd.h b/include/configs/controlcenterd.h index 7eaaf69..bfcfa0c 100644 --- a/include/configs/controlcenterd.h +++ b/include/configs/controlcenterd.h @@ -434,7 +434,6 @@ #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_LAST_STAGE_INIT -#undef CONFIG_CMD_BOOTM #endif /* CONFIG_TRAILBLAZER */ diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index a1a63a0..936be14 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -28,9 +28,6 @@ #define CONFIG_LMB #define CONFIG_OF_LIBFDT -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE -#define CONFIG_DEFAULT_DEVICE_TREE link #define CONFIG_BOOTSTAGE #define CONFIG_BOOTSTAGE_REPORT diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 1252d7a..5f85755 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -157,8 +157,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x30000 #endif @@ -376,8 +374,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SPL_SERIAL_SUPPORT #define CONFIG_SPL_LIBCOMMON_SUPPORT #define CONFIG_SPL_LIBGENERIC_SUPPORT diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index fd774a3..ff7ec4a 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -21,11 +21,6 @@ #include "tegra114-common.h" -/* Enable fdt support for Dalmore. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra114-dalmore -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra114 (Dalmore) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Dalmore" diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 4143a4d..2eaabde 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -116,8 +116,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x40000 #define CONFIG_SUPPORT_EMMC_BOOT diff --git a/include/configs/embestmx6boards.h b/include/configs/embestmx6boards.h index a7fd43b..185edbe 100644 --- a/include/configs/embestmx6boards.h +++ b/include/configs/embestmx6boards.h @@ -102,7 +102,7 @@ #define CONFIG_SPI_FLASH_SST #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(2, 30) << 8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif diff --git a/include/configs/exynos4-dt.h b/include/configs/exynos4-dt.h index 7dac1a3..99472ac 100644 --- a/include/configs/exynos4-dt.h +++ b/include/configs/exynos4-dt.h @@ -22,10 +22,6 @@ #define CONFIG_BOARD_COMMON #define CONFIG_SYS_GENERIC_BOARD -/* Enable fdt support */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - #define CONFIG_SYS_CACHELINE_SIZE 32 /* input clock of PLL: EXYNOS4 boards have 24MHz input clock */ diff --git a/include/configs/exynos5-dt.h b/include/configs/exynos5-dt.h index a7c6292..1dc3002 100644 --- a/include/configs/exynos5-dt.h +++ b/include/configs/exynos5-dt.h @@ -24,10 +24,6 @@ #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_EXYNOS_SPL -/* Enable fdt support for Exynos5250 */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* Allow tracing to be enabled */ #define CONFIG_TRACE #define CONFIG_CMD_TRACE diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 0e5c200..620f950 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -61,7 +61,7 @@ #define CONFIG_SPI_FLASH_BAR #define CONFIG_SPI_FLASH_WINBOND #define CONFIG_SF_DEFAULT_BUS 0 - #define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8)) + #define CONFIG_SF_DEFAULT_CS 0 /* GPIO 3-19 (21248) */ #define CONFIG_SF_DEFAULT_SPEED 30000000 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) diff --git a/include/configs/h2200.h b/include/configs/h2200.h index 9470ad6..109cee9 100644 --- a/include/configs/h2200.h +++ b/include/configs/h2200.h @@ -116,7 +116,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 } -#define CONFIG_CMD_IMPORTENV 1 #define CONFIG_CMD_LOADB #define CONFIG_CMD_SOURCE #define CONFIG_CMD_RUN diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 3ec0e41..ff9fbc9 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Harmony. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-harmony -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Harmony) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Harmony" diff --git a/include/configs/ip04.h b/include/configs/ip04.h index 3767502..ec510bd 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -133,7 +133,6 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_MISC_INIT_R /* needed for MAC address */ #define CONFIG_UART_CONSOLE 0 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED #undef CONFIG_SHOW_BOOT_PROGRESS /* Enable this if bootretry required; currently it's disabled */ diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index d03a66c..d67c025 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -12,11 +12,6 @@ #include "tegra124-common.h" -/* Enable fdt support for Jetson TK1. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra124-jetson-tk1 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra124 (Jetson TK1) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Jetson TK1" diff --git a/include/configs/ks2_evm.h b/include/configs/ks2_evm.h index 43db581..51926f7 100644 --- a/include/configs/ks2_evm.h +++ b/include/configs/ks2_evm.h @@ -58,8 +58,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_BOARD_INIT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS CONFIG_SPL_PAD_TO #define CONFIG_SPL_FRAMEWORK diff --git a/include/configs/kwb.h b/include/configs/kwb.h index 0860434..29b263f 100644 --- a/include/configs/kwb.h +++ b/include/configs/kwb.h @@ -89,7 +89,6 @@ #undef CONFIG_BOOTM_RTEMS #undef CONFIG_GZIP #undef CONFIG_ZLIB -#undef CONFIG_CMD_CRC32 /* USB configuration */ #define CONFIG_USB_MUSB_DSPS diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index 40155c3..ac5208f 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -12,11 +12,6 @@ #include "tegra20-common.h" -/* Enable fdt support for Medcom-Wide. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-medcom-wide -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Medcom-Wide) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Medcom-Wide" diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h index 1a82a57..bb07060 100644 --- a/include/configs/microblaze-generic.h +++ b/include/configs/microblaze-generic.h @@ -14,11 +14,6 @@ /* MicroBlaze CPU */ #define MICROBLAZE_V5 1 -/* Open Firmware DTS */ -#define CONFIG_OF_CONTROL 1 -#define CONFIG_OF_EMBED 1 -#define CONFIG_DEFAULT_DEVICE_TREE microblaze-generic - /* linear and spi flash memory */ #ifdef XILINX_FLASH_START #define FLASH diff --git a/include/configs/mx51_efikamx.h b/include/configs/mx51_efikamx.h index 0f2a4ef..fce7ead 100644 --- a/include/configs/mx51_efikamx.h +++ b/include/configs/mx51_efikamx.h @@ -96,11 +96,11 @@ #define CONFIG_SPI_FLASH #define CONFIG_SPI_FLASH_SST -#define CONFIG_SF_DEFAULT_CS (1 | 121 << 8) +#define CONFIG_SF_DEFAULT_CS 1 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) #define CONFIG_SF_DEFAULT_SPEED 25000000 -#define CONFIG_ENV_SPI_CS (1 | 121 << 8) +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_MAX_HZ 25000000 #define CONFIG_ENV_SPI_MODE (SPI_MODE_0) diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index e59a3b4..2d93d6c 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -74,7 +74,7 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(4, 9) << 8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 194d7bd..4208ba1 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -205,7 +205,7 @@ #define CONFIG_SPI_FLASH_STMICRO #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(4, 11) << 8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 20000000 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #endif diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index d4b0ac9..39d5bb3 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -53,7 +53,7 @@ #define CONFIG_SPI_FLASH_SST #define CONFIG_MXC_SPI #define CONFIG_SF_DEFAULT_BUS 0 -#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 19)<<8)) +#define CONFIG_SF_DEFAULT_CS 0 #define CONFIG_SF_DEFAULT_SPEED 25000000 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) #endif diff --git a/include/configs/odroid.h b/include/configs/odroid.h index 29dcc4a..b616ac2 100644 --- a/include/configs/odroid.h +++ b/include/configs/odroid.h @@ -16,8 +16,6 @@ #define CONFIG_SYS_PROMPT "Odroid # " /* Monitor Command Prompt */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4412-odroid #define CONFIG_SYS_L2CACHE_OFF #ifndef CONFIG_SYS_L2CACHE_OFF diff --git a/include/configs/origen.h b/include/configs/origen.h index 5d24916..fb1536c 100644 --- a/include/configs/origen.h +++ b/include/configs/origen.h @@ -13,8 +13,6 @@ #define CONFIG_SYS_PROMPT "ORIGEN # " -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-origen /* High Level Configuration Options */ #define CONFIG_EXYNOS4210 1 /* which is a EXYNOS4210 SoC */ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index dd0abf8..45bb470 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -20,11 +20,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Paz00. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-paz00 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Paz00) MOD # " #define CONFIG_TEGRA_BOARD_STRING "Compal Paz00" diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h index 5efcd76..7d102a4 100644 --- a/include/configs/pcm051.h +++ b/include/configs/pcm051.h @@ -128,8 +128,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 #endif diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h index 88c093f..987cef5 100644 --- a/include/configs/peach-pit.h +++ b/include/configs/peach-pit.h @@ -13,8 +13,6 @@ #include <configs/exynos5420.h> -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5420-peach-pit /* select serial console configuration */ #define CONFIG_SERIAL3 /* use SERIAL 3 */ diff --git a/include/configs/plutux.h b/include/configs/plutux.h index a473f23..b663b89 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -12,11 +12,6 @@ #include "tegra20-common.h" -/* Enable fdt support for Plutux. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-plutux -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Plutux) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Plutux" diff --git a/include/configs/pr1.h b/include/configs/pr1.h index e96ed4b..0f57e86 100644 --- a/include/configs/pr1.h +++ b/include/configs/pr1.h @@ -135,7 +135,6 @@ #define CONFIG_BOOTCOMMAND "run nandboot" #define CONFIG_BOOTDELAY 2 #define CONFIG_LOADADDR 0x2000000 -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 20985da..082d51c 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -14,8 +14,6 @@ #define CONFIG_SYS_PROMPT "Universal # " /* Monitor Command Prompt */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-universal_c210 #define CONFIG_TIZEN /* TIZEN lib */ diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index 0104d5f..c46baf2 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -298,8 +298,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400 #endif diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index f5fa4b3..5d36416 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -38,15 +38,12 @@ /* Number of bits in a C 'long' on this architecture */ #define CONFIG_SANDBOX_BITS_PER_LONG 64 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_HOSTFILE #define CONFIG_OF_LIBFDT #define CONFIG_LMB #define CONFIG_FIT #define CONFIG_FIT_SIGNATURE #define CONFIG_RSA #define CONFIG_CMD_FDT -#define CONFIG_DEFAULT_DEVICE_TREE sandbox #define CONFIG_ANDROID_BOOT_IMAGE #define CONFIG_FS_FAT diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index fc4f976..04e4f82 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -19,11 +19,6 @@ #include "tegra20-common.h" -/* Enable fdt support for Seaboard. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-seaboard -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (SeaBoard) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Seaboard" diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index b8fb77e..bf9752f 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -167,8 +167,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index 66fa179..6117094 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -11,8 +11,6 @@ #include <configs/exynos5250-dt.h> -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-smdk5250 /* Enable FIT support and comparison */ #define CONFIG_FIT diff --git a/include/configs/smdk5420.h b/include/configs/smdk5420.h index 606739b..36a156f 100644 --- a/include/configs/smdk5420.h +++ b/include/configs/smdk5420.h @@ -15,8 +15,6 @@ #define CONFIG_SMDK5420 /* which is in a SMDK5420 */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5420-smdk5420 /* select serial console configuration */ #define CONFIG_SERIAL3 /* use SERIAL 3 */ diff --git a/include/configs/snow.h b/include/configs/snow.h index 673fa14..fbaaa59 100644 --- a/include/configs/snow.h +++ b/include/configs/snow.h @@ -11,8 +11,6 @@ #include <configs/exynos5250-dt.h> -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos5250-snow /* Enable FIT support and comparison */ #define CONFIG_FIT diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index a77ba69..6673026 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -116,7 +116,6 @@ #define CONFIG_UART_CONSOLE 0 #define CONFIG_BOOTCOMMAND "run flashboot" #define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0x20040000\0" -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index c4c1c57..9998343 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -145,7 +145,6 @@ "flashboot=flread 20040000 1000000 300000;" \ "bootm 0x1000000\0" #define CONFIG_BOARD_SIZE_LIMIT $$((384 * 1024)) -#define CONFIG_CC_OPTIMIZE_LIBS_FOR_SPEED /* * Pull in common ADI header for remaining command/environment setup diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h index 13baa76..51f87da 100644 --- a/include/configs/tec-ng.h +++ b/include/configs/tec-ng.h @@ -10,11 +10,6 @@ #include "tegra30-common.h" -/* Enable fdt support for tec-ng. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra30-tec-ng -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra30 (TEC-NG) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten™ NG Evaluation Carrier" diff --git a/include/configs/tec.h b/include/configs/tec.h index 90e7b7a..9ea4ff4 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -12,11 +12,6 @@ #include "tegra20-common.h" -/* Enable fdt support for TEC. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-tec -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (TEC) # " #define CONFIG_TEGRA_BOARD_STRING "Avionic Design Tamonten Evaluation Carrier" diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index c337e30..23e3c8a 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -69,7 +69,6 @@ /* remove devicetree support */ #ifdef CONFIG_OF_CONTROL -#undef CONFIG_OF_CONTROL #endif /* remove I2C support */ diff --git a/include/configs/trats.h b/include/configs/trats.h index 6fa646b..43751e7 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -16,8 +16,6 @@ #define CONFIG_TRATS -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4210-trats #define CONFIG_TIZEN /* TIZEN lib */ diff --git a/include/configs/trats2.h b/include/configs/trats2.h index 1450865..e9a04f7 100644 --- a/include/configs/trats2.h +++ b/include/configs/trats2.h @@ -15,8 +15,6 @@ #define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */ -#undef CONFIG_DEFAULT_DEVICE_TREE -#define CONFIG_DEFAULT_DEVICE_TREE exynos4412-trats2 #define CONFIG_TIZEN /* TIZEN lib */ diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index f81cfa2..7c00642 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for TrimSlice. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-trimslice -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (TrimSlice) # " #define CONFIG_TEGRA_BOARD_STRING "Compulab Trimslice" diff --git a/include/configs/tseries.h b/include/configs/tseries.h index 1dd13fd..9a62070 100644 --- a/include/configs/tseries.h +++ b/include/configs/tseries.h @@ -222,8 +222,6 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_FLASH_SUPPORT #define CONFIG_SPL_SPI_LOAD -#define CONFIG_SPL_SPI_BUS 0 -#define CONFIG_SPL_SPI_CS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000 #undef CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_IS_IN_SPI_FLASH diff --git a/include/configs/vct.h b/include/configs/vct.h index 5ab4de3..217ba2f 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -296,7 +296,6 @@ int vct_gpio_get(int pin); #undef CONFIG_CMD_BEDBUG #undef CONFIG_CMD_CACHE #undef CONFIG_CMD_CONSOLE -#undef CONFIG_CMD_CRC32 #undef CONFIG_CMD_DHCP #undef CONFIG_CMD_EEPROM #undef CONFIG_CMD_EEPROM diff --git a/include/configs/venice2.h b/include/configs/venice2.h index 6d4e999..6897aa8 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -12,11 +12,6 @@ #include "tegra124-common.h" -/* Enable fdt support for Venice2. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra124-venice2 -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra124 (Venice2) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Venice2" diff --git a/include/configs/ventana.h b/include/configs/ventana.h index edf3720..f195f8a 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Ventana. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-ventana -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Ventana) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Ventana" diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 0897932..f3af971 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -51,7 +51,6 @@ /* Flat Device Tree Definitions */ #define CONFIG_OF_LIBFDT -#define CONFIG_DEFAULT_DEVICE_TREE vexpress64 /* SMP Spin Table Definitions */ #ifdef CONFIG_BASE_FVP diff --git a/include/configs/vision2.h b/include/configs/vision2.h index 6891bf8..3f35076 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -57,11 +57,11 @@ * Use gpio 4 pin 25 as chip select for SPI flash * This corresponds to gpio 121 */ -#define CONFIG_SF_DEFAULT_CS (1 | (121 << 8)) +#define CONFIG_SF_DEFAULT_CS 1 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 #define CONFIG_SF_DEFAULT_SPEED 25000000 -#define CONFIG_ENV_SPI_CS (1 | (121 << 8)) +#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS #define CONFIG_ENV_SPI_BUS 0 #define CONFIG_ENV_SPI_MAX_HZ 25000000 #define CONFIG_ENV_SPI_MODE SPI_MODE_0 diff --git a/include/configs/whistler.h b/include/configs/whistler.h index 9e09f03..10e70d2 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -11,11 +11,6 @@ #include <linux/sizes.h> #include "tegra20-common.h" -/* Enable fdt support for Whistler. Flash the image in u-boot-dtb.bin */ -#define CONFIG_DEFAULT_DEVICE_TREE tegra20-whistler -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE - /* High-level configuration options */ #define V_PROMPT "Tegra20 (Whistler) # " #define CONFIG_TEGRA_BOARD_STRING "NVIDIA Whistler" diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index 875cb43..0b4dd66 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -227,8 +227,6 @@ #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */ /* FDT support */ -#define CONFIG_OF_CONTROL -#define CONFIG_OF_SEPARATE #define CONFIG_DISPLAY_BOARDINFO_LATE /* RSA support */ @@ -273,18 +271,13 @@ #define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1 #define CONFIG_SPL_LIBDISK_SUPPORT #define CONFIG_SPL_FAT_SUPPORT -#if defined(CONFIG_OF_CONTROL) && defined(CONFIG_OF_SEPARATE) -# define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot-dtb.img" -#else -# define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" -#endif +#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot-dtb.img" #endif /* Disable dcache for SPL just for sure */ #ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_DCACHE_OFF #undef CONFIG_FPGA -#undef CONFIG_OF_CONTROL #endif /* Address in RAM where the parameters must be copied by SPL. */ @@ -303,9 +296,7 @@ #define CONFIG_SPL_SPI_SUPPORT #define CONFIG_SPL_SPI_LOAD #define CONFIG_SPL_SPI_FLASH_SUPPORT -#define CONFIG_SPL_SPI_BUS 0 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000 -#define CONFIG_SPL_SPI_CS 0 #endif /* for booting directly linux */ diff --git a/include/configs/zynq_microzed.h b/include/configs/zynq_microzed.h index b0328a2..549a664 100644 --- a/include/configs/zynq_microzed.h +++ b/include/configs/zynq_microzed.h @@ -19,7 +19,6 @@ #define CONFIG_SYS_NO_FLASH #define CONFIG_ZYNQ_SDHCI0 -#define CONFIG_DEFAULT_DEVICE_TREE zynq-microzed #include <configs/zynq-common.h> diff --git a/include/configs/zynq_zc70x.h b/include/configs/zynq_zc70x.h index 291a5fe..b659054 100644 --- a/include/configs/zynq_zc70x.h +++ b/include/configs/zynq_zc70x.h @@ -23,7 +23,6 @@ #define CONFIG_ZYNQ_I2C0 #define CONFIG_ZYNQ_EEPROM #define CONFIG_ZYNQ_BOOT_FREEBSD -#define CONFIG_DEFAULT_DEVICE_TREE zynq-zc702 #include <configs/zynq-common.h> diff --git a/include/configs/zynq_zc770.h b/include/configs/zynq_zc770.h index 8aa96e7..16b9047 100644 --- a/include/configs/zynq_zc770.h +++ b/include/configs/zynq_zc770.h @@ -20,18 +20,15 @@ # define CONFIG_ZYNQ_GEM_PHY_ADDR0 7 # define CONFIG_ZYNQ_SDHCI0 # define CONFIG_ZYNQ_SPI -# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm010 #elif defined(CONFIG_ZC770_XM012) # define CONFIG_ZYNQ_SERIAL_UART1 # undef CONFIG_SYS_NO_FLASH -# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm012 #elif defined(CONFIG_ZC770_XM013) # define CONFIG_ZYNQ_SERIAL_UART0 # define CONFIG_ZYNQ_GEM1 # define CONFIG_ZYNQ_GEM_PHY_ADDR1 7 -# define CONFIG_DEFAULT_DEVICE_TREE zynq-zc770-xm013 #else # define CONFIG_ZYNQ_SERIAL_UART0 diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h index ce17d40..946de95 100644 --- a/include/configs/zynq_zed.h +++ b/include/configs/zynq_zed.h @@ -21,7 +21,6 @@ #define CONFIG_ZYNQ_USB #define CONFIG_ZYNQ_SDHCI0 #define CONFIG_ZYNQ_BOOT_FREEBSD -#define CONFIG_DEFAULT_DEVICE_TREE zynq-zed #include <configs/zynq-common.h> diff --git a/include/fb_mmc.h b/include/fb_mmc.h new file mode 100644 index 0000000..1ad1d13 --- /dev/null +++ b/include/fb_mmc.h @@ -0,0 +1,8 @@ +/* + * Copyright 2014 Broadcom Corporation. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +void fb_mmc_flash_write(const char *cmd, void *download_buffer, + unsigned int download_bytes, char *response); diff --git a/include/linker_lists.h b/include/linker_lists.h index 557e627..507d61b 100644 --- a/include/linker_lists.h +++ b/include/linker_lists.h @@ -28,11 +28,11 @@ * together. Assuming _list and _entry are the list and entry names, * then the corresponding input section name is * - * _u_boot_list + _2_ + @_list + _2_ + @_entry + * .u_boot_list_ + 2_ + @_list + _2_ + @_entry * * and the C variable name is * - * .u_boot_list_ + 2_ + @_list + _2_ + @_entry + * _u_boot_list + _2_ + @_list + _2_ + @_entry * * This ensures uniqueness for both input section and C variable name. * diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h index 02ae99e..e057bd2 100644 --- a/include/linux/compiler-gcc.h +++ b/include/linux/compiler-gcc.h @@ -64,8 +64,12 @@ #endif #define __deprecated __attribute__((deprecated)) +#ifndef __packed #define __packed __attribute__((packed)) +#endif +#ifndef __weak #define __weak __attribute__((weak)) +#endif /* * it doesn't make sense on ARM (currently the only user of __naked) to trace @@ -91,8 +95,12 @@ * would be. * [...] */ +#ifndef __pure #define __pure __attribute__((pure)) +#endif +#ifndef __aligned #define __aligned(x) __attribute__((aligned(x))) +#endif #define __printf(a, b) __attribute__((format(printf, a, b))) #define __scanf(a, b) __attribute__((format(scanf, a, b))) #define noinline __attribute__((noinline)) @@ -115,4 +123,6 @@ */ #define uninitialized_var(x) x = x +#ifndef __always_inline #define __always_inline inline __attribute__((always_inline)) +#endif diff --git a/include/spi_flash.h b/include/spi_flash.h index 2db53c7..408a5b4 100644 --- a/include/spi_flash.h +++ b/include/spi_flash.h @@ -19,6 +19,19 @@ #include <linux/types.h> #include <linux/compiler.h> +#ifndef CONFIG_SF_DEFAULT_SPEED +# define CONFIG_SF_DEFAULT_SPEED 1000000 +#endif +#ifndef CONFIG_SF_DEFAULT_MODE +# define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 +#endif +#ifndef CONFIG_SF_DEFAULT_CS +# define CONFIG_SF_DEFAULT_CS 0 +#endif +#ifndef CONFIG_SF_DEFAULT_BUS +# define CONFIG_SF_DEFAULT_BUS 0 +#endif + /* sf param flags */ #define SECT_4K 1 << 1 #define SECT_32K 1 << 2 diff --git a/lib/Kconfig b/lib/Kconfig new file mode 100644 index 0000000..88e5da7 --- /dev/null +++ b/lib/Kconfig @@ -0,0 +1,11 @@ +menu "Library routines" + +config CC_OPTIMIZE_LIBS_FOR_SPEED + bool "Optimize libraries for speed" + help + Enabling this option will pass "-O2" to gcc when compiling + under "lib" directory. + + If unsure, say N. + +endmenu diff --git a/net/Kconfig b/net/Kconfig new file mode 100644 index 0000000..22b9eaa --- /dev/null +++ b/net/Kconfig @@ -0,0 +1,10 @@ +# +# Network configuration +# + +menuconfig NET + bool "Networking support" + +if NET + +endif # if NET diff --git a/scripts/Makefile.autoconf b/scripts/Makefile.autoconf index 44c3997..ced2b9a 100644 --- a/scripts/Makefile.autoconf +++ b/scripts/Makefile.autoconf @@ -74,7 +74,6 @@ define filechk_config_h | sed '/=/ {s/=/ /;q; } ; { s/$$/ 1/; }'; \ done; \ echo \#define CONFIG_BOARDDIR board/$(if $(VENDOR),$(VENDOR)/)$(BOARD);\ - echo \#include \<config_cmd_defaults.h\>; \ echo \#include \<config_defaults.h\>; \ echo \#include \<configs/$(CONFIG_SYS_CONFIG_NAME).h\>; \ echo \#include \<asm/config.h\>; \ diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 3fed5e4..74db2e2 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -2148,7 +2148,7 @@ sub process { "please, no space before tabs\n" . $herevet) && $fix) { while ($fixed[$linenr - 1] =~ - s/(^\+.*) {8,8}+\t/$1\t\t/) {} + s/(^\+.*) {8,8}\t/$1\t\t/) {} while ($fixed[$linenr - 1] =~ s/(^\+.*) +\t/$1\t/) {} } diff --git a/test/cmd_repeat.sh b/test/cmd_repeat.sh new file mode 100755 index 0000000..990e799 --- /dev/null +++ b/test/cmd_repeat.sh @@ -0,0 +1,29 @@ +#!/bin/sh + +# Test for U-Boot cli including command repeat + +BASE="$(dirname $0)" +. $BASE/common.sh + +run_test() { + ./${OUTPUT_DIR}/u-boot <<END +setenv ctrlc_ignore y +md 0 + +reset +END +} +check_results() { + echo "Check results" + + grep -q 00000100 ${tmp} || fail "Command did not repeat" +} + +echo "Test CLI repeat" +echo +tmp="$(tempfile)" +build_uboot +run_test >${tmp} +check_results ${tmp} +rm ${tmp} +echo "Test passed" diff --git a/test/common.sh b/test/common.sh new file mode 100644 index 0000000..702d1ed --- /dev/null +++ b/test/common.sh @@ -0,0 +1,20 @@ +#!/bin/sh + +OUTPUT_DIR=sandbox + +fail() { + echo "Test failed: $1" + if [ -n ${tmp} ]; then + rm ${tmp} + fi + exit 1 +} + +build_uboot() { + echo "Build sandbox" + OPTS="O=${OUTPUT_DIR} $1" + NUM_CPUS=$(grep -c processor /proc/cpuinfo) + echo ${OPTS} + make ${OPTS} sandbox_config + make ${OPTS} -s -j${NUM_CPUS} +} diff --git a/test/trace/test-trace.sh b/test/trace/test-trace.sh index aa02f09..3e8651e 100755 --- a/test/trace/test-trace.sh +++ b/test/trace/test-trace.sh @@ -5,39 +5,25 @@ # Simple test script for tracing with sandbox -OUTPUT_DIR=sandbox TRACE_OPT="FTRACE=1" -fail() { - echo "Test failed: $1" - if [ -n ${tmp} ]; then - rm ${tmp} - fi - exit 1 -} - -build_uboot() { - echo "Build sandbox" - OPTS="O=${OUTPUT_DIR} ${TRACE_OPT}" - NUM_CPUS=$(grep -c processor /proc/cpuinfo) - make ${OPTS} sandbox_config - make ${OPTS} -s -j${NUM_CPUS} -} +BASE="$(dirname $0)/.." +. $BASE/common.sh run_trace() { echo "Run trace" ./${OUTPUT_DIR}/u-boot <<END - trace stats - hash sha256 0 10000 - trace pause - trace stats - hash sha256 0 10000 - trace stats - trace resume - hash sha256 0 10000 - trace pause - trace stats - reset +trace stats +hash sha256 0 10000 +trace pause +trace stats +hash sha256 0 10000 +trace stats +trace resume +hash sha256 0 10000 +trace pause +trace stats +reset END } @@ -69,7 +55,7 @@ check_results() { echo "Simple trace test / sanity check using sandbox" echo tmp="$(tempfile)" -build_uboot +build_uboot "${TRACE_OPT}" run_trace >${tmp} check_results ${tmp} rm ${tmp} diff --git a/tools/env/Makefile b/tools/env/Makefile index 4927489..40164f7 100644 --- a/tools/env/Makefile +++ b/tools/env/Makefile @@ -21,14 +21,16 @@ HOST_EXTRACFLAGS += -DMTD_OLD endif always := fw_printenv -hostprogs-y := fw_printenv_unstripped +hostprogs-y := fw_printenv -fw_printenv_unstripped-objs := fw_env.o fw_env_main.o \ +fw_printenv-objs := fw_env.o fw_env_main.o \ crc32.o ctype.o linux_string.o \ env_attr.o env_flags.o aes.o -quiet_cmd_strip = STRIP $@ - cmd_strip = $(STRIP) -o $@ $< +quiet_cmd_crosstools_strip = STRIP $^ + cmd_crosstools_strip = $(STRIP) $^; touch $@ -$(obj)/fw_printenv: $(obj)/fw_printenv_unstripped FORCE - $(call if_changed,strip) +$(obj)/.strip: $(obj)/fw_printenv + $(call cmd,crosstools_strip) + +always += .strip diff --git a/tools/genboardscfg.py b/tools/genboardscfg.py index 654100b..23c956b 100755 --- a/tools/genboardscfg.py +++ b/tools/genboardscfg.py @@ -328,6 +328,9 @@ class MaintainersDatabase: maintainers = [] status = '-' for line in open(file): + # Check also commented maintainers + if line[:3] == '#M:': + line = line[1:] tag, rest = line[:2], line[2:].strip() if tag == 'M:': maintainers.append(rest) diff --git a/tools/reformat.py b/tools/reformat.py deleted file mode 100755 index 61306d0..0000000 --- a/tools/reformat.py +++ /dev/null @@ -1,132 +0,0 @@ -#! /usr/bin/python -######################################################################## -# -# reorder and reformat a file in columns -# -# this utility takes lines from its standard input and reproduces them, -# partially reordered and reformatted, on its standard output. -# -# It has the same effect as a 'sort | column -t', with the exception -# that empty lines, as well as lines which start with a '#' sign, are -# not affected, i.e. they keep their position and formatting, and act -# as separators, i.e. the parts before and after them are each sorted -# separately (but overall field widths are computed across the whole -# input). -# -# Options: -# -i: -# --ignore-case: -# Do not consider case when sorting. -# -d: -# --default: -# What to chage empty fields to. -# -s <N>: -# --split=<N>: -# Treat only the first N whitespace sequences as separators. -# line content after the Nth separator will count as only one -# field even if it contains whitespace. -# Example : '-s 2' causes input 'a b c d e' to be split into -# three fields, 'a', 'b', and 'c d e'. -# -# boards.cfg requires -ids 6. -# -######################################################################## - -import sys, getopt, locale - -# ensure we sort using the C locale. - -locale.setlocale(locale.LC_ALL, 'C') - -# check options - -maxsplit = 0 -ignore_case = 0 -default_field ='' - -try: - opts, args = getopt.getopt(sys.argv[1:], "id:s:", - ["ignore-case","default","split="]) -except getopt.GetoptError as err: - print str(err) # will print something like "option -a not recognized" - sys.exit(2) - -for o, a in opts: - if o in ("-s", "--split"): - maxsplit = eval(a) - elif o in ("-i", "--ignore-case"): - ignore_case = 1 - elif o in ("-d", "--default"): - default_field = a - else: - assert False, "unhandled option" - -# collect all lines from standard input and, for the ones which must be -# reformatted and sorted, count their fields and compute each field's -# maximum size - -input_lines = [] -field_width = [] - -for line in sys.stdin: - # remove final end of line - input_line = line.strip('\n') - if (len(input_line)>0) and (input_line[0] != '#'): - # sortable line: split into fields - fields = input_line.split(None,maxsplit) - # if there are new fields, top up field_widths - for f in range(len(field_width), len(fields)): - field_width.append(0) - # compute the maximum witdh of each field - for f in range(len(fields)): - field_width[f] = max(field_width[f],len(fields[f])) - # collect the line for next stage - input_lines.append(input_line) - -# run through collected input lines, collect the ones which must be -# reformatted and sorted, and whenever a non-reformattable, non-sortable -# line is met, sort the collected lines before it and append them to the -# output lines, then add the non-sortable line too. - -output_lines = [] -sortable_lines = [] -for input_line in input_lines: - if (len(input_line)>0) and (input_line[0] != '#'): - # this line should be reformatted and sorted - input_fields = input_line.split(None,maxsplit) - output_fields = []; - # reformat each field to this field's column width - for f in range(len(input_fields)): - output_field = input_fields[f]; - output_fields.append(output_field.ljust(field_width[f])) - # any missing field is set to default if it exists - if default_field != '': - for f in range(len(input_fields),len(field_width)): - output_fields.append(default_field.ljust(field_width[f])) - # join fields using two spaces, like column -t would - output_line = ' '.join(output_fields); - # collect line for later - sortable_lines.append(output_line) - else: - # this line is non-sortable - # sort collected sortable lines - if ignore_case!=0: - sortable_lines.sort(key=lambda x: str.lower(locale.strxfrm(x))) - else: - sortable_lines.sort(key=lambda x: locale.strxfrm(x)) - # append sortable lines to the final output - output_lines.extend(sortable_lines) - sortable_lines = [] - # append non-sortable line to the final output - output_lines.append(input_line) -# maybe we had sortable lines pending, so append them to the final output -if ignore_case!=0: - sortable_lines.sort(key=lambda x: str.lower(locale.strxfrm(x))) -else: - sortable_lines.sort(key=lambda x: locale.strxfrm(x)) -output_lines.extend(sortable_lines) - -# run through output lines and print them, except rightmost whitespace - -for output_line in output_lines: - print output_line.rstrip() |