diff options
226 files changed, 3949 insertions, 1892 deletions
@@ -47,8 +47,8 @@ /errlog /reloc_off -!/spl/Makefile /spl/* +!/spl/Makefile /tpl/ # @@ -6,9 +6,9 @@ # VERSION = 2014 -PATCHLEVEL = 04 +PATCHLEVEL = 07 SUBLEVEL = -EXTRAVERSION = +EXTRAVERSION = -rc1 NAME = # *DOCUMENTATION* @@ -285,7 +285,7 @@ export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD # cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< # # If $(quiet) is empty, the whole command will be printed. -# If it is set to "quiet_", only the short version will be printed. +# If it is set to "quiet_", only the short version will be printed. # If it is set to "silent_", nothing will be printed at all, since # the variable $(silent_cmd_cc_o_c) doesn't exist. # @@ -578,6 +578,9 @@ KBUILD_AFLAGS += -Wa,-gstabs,-S endif endif +# Prohibit date/time macros, which would make the build non-deterministic +KBUILD_CFLAGS += $(call cc-option,-Werror=date-time) + ifneq ($(CONFIG_SYS_TEXT_BASE),) KBUILD_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) endif @@ -995,7 +998,7 @@ ifeq ($(CONFIG_KALLSYMS),y) $(call cmd,u-boot__) common/system_map.o endif -# The actual objects are generated when descending, +# The actual objects are generated when descending, # make sure no implicit rule kicks in $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ; @@ -1434,7 +1437,7 @@ endif $(build)=$(build-dir) $(@:.ko=.o) $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost -# FIXME Should go into a make.lib or something +# FIXME Should go into a make.lib or something # =========================================================================== quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN $(wildcard $(rm-dirs))) @@ -264,6 +264,17 @@ e.g. "make cogent_mpc8xx_config". And also configure the cogent directory according to the instructions in cogent/README. +Sandbox Environment: +-------------------- + +U-Boot can be built natively to run on a Linux host using the 'sandbox' +board. This allows feature development which is not board- or architecture- +specific to be undertaken on a native platform. The sandbox is also used to +run some of U-Boot's tests. + +See board/sandbox/sandbox/README.sandbox for more details. + + Configuration Options: ---------------------- @@ -440,6 +451,12 @@ The following options need to be configured: supported, core will start to execute uboot when wakes up. - Generic CPU options: + CONFIG_SYS_GENERIC_GLOBAL_DATA + Defines global data is initialized in generic board board_init_f(). + If this macro is defined, global data is created and cleared in + generic board board_init_f(). Without this macro, architecture/board + should initialize global data before calling board_init_f(). + CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN Defines the endianess of the CPU. Implementation of those @@ -740,6 +757,10 @@ The following options need to be configured: boot loader that has already initialized the UART. Define this variable to flush the UART at init time. + CONFIG_SERIAL_HW_FLOW_CONTROL + + Define this variable to enable hw flow control in serial driver. + Current user of this option is drivers/serial/nsl16550.c driver - Console Interface: Depending on board, define exactly one serial port diff --git a/arch/arc/include/asm/config.h b/arch/arc/include/asm/config.h index 5761def..3d331cc 100644 --- a/arch/arc/include/asm/config.h +++ b/arch/arc/include/asm/config.h @@ -7,6 +7,8 @@ #ifndef __ASM_ARC_CONFIG_H_ #define __ASM_ARC_CONFIG_H_ +#define CONFIG_SYS_GENERIC_GLOBAL_DATA + #define CONFIG_LMB #endif /*__ASM_ARC_CONFIG_H_ */ diff --git a/arch/arm/include/asm/config.h b/arch/arm/include/asm/config.h index abf79e5..2a20a77 100644 --- a/arch/arm/include/asm/config.h +++ b/arch/arm/include/asm/config.h @@ -7,6 +7,8 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_SYS_GENERIC_GLOBAL_DATA + #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH diff --git a/arch/arm/include/asm/u-boot.h b/arch/arm/include/asm/u-boot.h index cb81232..43cc494 100644 --- a/arch/arm/include/asm/u-boot.h +++ b/arch/arm/include/asm/u-boot.h @@ -27,7 +27,6 @@ #ifndef __ASSEMBLY__ typedef struct bd_info { - unsigned int bi_baudrate; /* serial console baudrate */ ulong bi_arch_number; /* unique id for this board */ ulong bi_boot_params; /* where this board expects params */ unsigned long bi_arm_freq; /* arm frequency */ diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 92e85c4..9b473b5 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -445,7 +445,6 @@ void board_init_f(ulong bootflag) post_run(NULL, POST_ROM | post_bootmode_get(0)); #endif - gd->bd->bi_baudrate = gd->baudrate; /* Ram ist board specific, so move it to board code ... */ dram_init_banksize(); display_dram_config(); /* and display it */ diff --git a/arch/avr32/include/asm/u-boot.h b/arch/avr32/include/asm/u-boot.h index bff17d5..6aef808 100644 --- a/arch/avr32/include/asm/u-boot.h +++ b/arch/avr32/include/asm/u-boot.h @@ -7,7 +7,6 @@ #define __ASM_U_BOOT_H__ 1 typedef struct bd_info { - unsigned int bi_baudrate; unsigned char bi_phy_id[4]; unsigned long bi_board_number; void *bi_boot_params; diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c index 28c2ec0..7680102 100644 --- a/arch/avr32/lib/board.c +++ b/arch/avr32/lib/board.c @@ -220,7 +220,6 @@ void board_init_f(ulong board_type) */ bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; bd->bi_dram[0].size = sdram_size; - bd->bi_baudrate = gd->baudrate; memcpy(new_gd, gd, sizeof(gd_t)); diff --git a/arch/blackfin/include/asm/net.h b/arch/blackfin/include/asm/net.h deleted file mode 100644 index 97cb466..0000000 --- a/arch/blackfin/include/asm/net.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * net.h - misc Blackfin network helpers - * - * Copyright (c) 2008-2009 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef __ASM_BFIN_RAND_MAC__ -#define __ASM_BFIN_RAND_MAC__ - -/* If the board does not have a real MAC assigned to it, then generate a - * locally administrated pseudo-random one based on CYCLES and compile date. - */ -static inline void bfin_gen_rand_mac(uchar *mac_addr) -{ - /* make something up */ - const char s[] = __DATE__; - size_t i; - u32 cycles; - for (i = 0; i < 6; ++i) { - asm("%0 = CYCLES;" : "=r" (cycles)); - mac_addr[i] = cycles ^ s[i]; - } - mac_addr[0] = (mac_addr[0] | 0x02) & ~0x01; /* make it local unicast */ -} - -#endif diff --git a/arch/blackfin/include/asm/u-boot.h b/arch/blackfin/include/asm/u-boot.h index fc36ced..acaeee9 100644 --- a/arch/blackfin/include/asm/u-boot.h +++ b/arch/blackfin/include/asm/u-boot.h @@ -13,7 +13,6 @@ #define _U_BOOT_H_ 1 typedef struct bd_info { - unsigned int bi_baudrate; /* serial console baudrate */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ phys_size_t bi_memsize; /* size of DRAM memory in bytes */ diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c index 6234201..8784255 100644 --- a/arch/blackfin/lib/board.c +++ b/arch/blackfin/lib/board.c @@ -69,7 +69,6 @@ static int display_banner(void) static int init_baudrate(void) { gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); - gd->bd->bi_baudrate = gd->baudrate; return 0; } @@ -92,7 +91,6 @@ static void display_global_data(void) printf(" |-env_valid: %lx\n", gd->env_valid); printf(" |-jt(%p): %p\n", gd->jt, *(gd->jt)); printf(" \\-bd: %p\n", gd->bd); - printf(" |-bi_baudrate: %x\n", bd->bi_baudrate); printf(" |-bi_boot_params: %lx\n", bd->bi_boot_params); printf(" |-bi_memstart: %lx\n", bd->bi_memstart); printf(" |-bi_memsize: %lx\n", bd->bi_memsize); diff --git a/arch/m68k/include/asm/u-boot.h b/arch/m68k/include/asm/u-boot.h index 99de31a..983cb2d 100644 --- a/arch/m68k/include/asm/u-boot.h +++ b/arch/m68k/include/asm/u-boot.h @@ -44,7 +44,6 @@ typedef struct bd_info { unsigned long bi_vcofreq; /* vco Freq in MHz */ unsigned long bi_flbfreq; /* Flexbus Freq in MHz */ #endif - unsigned int bi_baudrate; /* Console Baudrate */ } bd_t; #endif /* __ASSEMBLY__ */ diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index e75b6a9..318ca01 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -342,7 +342,6 @@ board_init_f (ulong bootflag) bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */ bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */ #endif - bd->bi_baudrate = gd->baudrate; /* Console Baudrate */ #ifdef CONFIG_SYS_EXTBDINFO strncpy (bd->bi_s_version, "1.2", sizeof (bd->bi_s_version)); diff --git a/arch/microblaze/include/asm/u-boot.h b/arch/microblaze/include/asm/u-boot.h index ab3f232..54d415e 100644 --- a/arch/microblaze/include/asm/u-boot.h +++ b/arch/microblaze/include/asm/u-boot.h @@ -24,7 +24,6 @@ typedef struct bd_info { unsigned long bi_flashoffset; /* reserved area for startup monitor */ unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ - unsigned int bi_baudrate; /* Console Baudrate */ ulong bi_boot_params; /* where this board expects params */ } bd_t; diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index fafeeae..600c80a 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -78,7 +78,6 @@ void board_init_f(ulong not_used) memset((void *)bd, 0, GENERATED_BD_INFO_SIZE); gd->bd = bd; gd->baudrate = CONFIG_BAUDRATE; - bd->bi_baudrate = CONFIG_BAUDRATE; bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE; gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ diff --git a/arch/mips/include/asm/config.h b/arch/mips/include/asm/config.h index 3a891ba..1c8a42b 100644 --- a/arch/mips/include/asm/config.h +++ b/arch/mips/include/asm/config.h @@ -7,6 +7,8 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_SYS_GENERIC_GLOBAL_DATA + #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH diff --git a/arch/mips/include/asm/u-boot.h b/arch/mips/include/asm/u-boot.h index 0eb170d..4909a2a 100644 --- a/arch/mips/include/asm/u-boot.h +++ b/arch/mips/include/asm/u-boot.h @@ -23,7 +23,6 @@ #else /* !CONFIG_SYS_GENERIC_BOARD */ typedef struct bd_info { - unsigned int bi_baudrate; /* serial console baudrate */ unsigned long bi_arch_number; /* unique id for this board */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c index 3200d87..3feb020 100644 --- a/arch/mips/lib/board.c +++ b/arch/mips/lib/board.c @@ -204,7 +204,6 @@ void board_init_f(ulong bootflag) */ bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM */ bd->bi_memsize = gd->ram_size; /* size of DRAM in bytes */ - bd->bi_baudrate = gd->baudrate; /* Console Baudrate */ memcpy(id, (void *)gd, sizeof(gd_t)); diff --git a/arch/nds32/include/asm/u-boot.h b/arch/nds32/include/asm/u-boot.h index 8170d28..44e72d4 100644 --- a/arch/nds32/include/asm/u-boot.h +++ b/arch/nds32/include/asm/u-boot.h @@ -23,7 +23,6 @@ #include <environment.h> typedef struct bd_info { - unsigned int bi_baudrate; /* serial console baudrate */ unsigned long bi_arch_number; /* unique id for this board */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c index 2d4c623..4c06a48 100644 --- a/arch/nds32/lib/board.c +++ b/arch/nds32/lib/board.c @@ -255,7 +255,6 @@ void board_init_f(ulong bootflag) addr_sp &= ~0x07; debug("New Stack Pointer is: %08lx\n", addr_sp); - gd->bd->bi_baudrate = gd->baudrate; /* Ram isn't board specific, so move it to board code ... */ dram_init_banksize(); display_dram_config(); /* and display it */ diff --git a/arch/nios2/include/asm/u-boot.h b/arch/nios2/include/asm/u-boot.h index 6849b4a..51f6c30 100644 --- a/arch/nios2/include/asm/u-boot.h +++ b/arch/nios2/include/asm/u-boot.h @@ -23,7 +23,6 @@ typedef struct bd_info { unsigned long bi_flashoffset; /* reserved area for startup monitor */ unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ - unsigned int bi_baudrate; /* Console Baudrate */ } bd_t; /* For image.h:image_check_target_arch() */ diff --git a/arch/nios2/lib/board.c b/arch/nios2/lib/board.c index bb1a8a7..f24218f 100644 --- a/arch/nios2/lib/board.c +++ b/arch/nios2/lib/board.c @@ -92,7 +92,6 @@ void board_init(void) bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; #endif - bd->bi_baudrate = CONFIG_BAUDRATE; for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { WATCHDOG_RESET(); diff --git a/arch/openrisc/include/asm/u-boot.h b/arch/openrisc/include/asm/u-boot.h index 5c288a8..cdb8ff9 100644 --- a/arch/openrisc/include/asm/u-boot.h +++ b/arch/openrisc/include/asm/u-boot.h @@ -16,7 +16,6 @@ #define _U_BOOT_H_ typedef struct bd_info { - unsigned int bi_baudrate; /* serial console baudrate */ unsigned long bi_arch_number; /* unique id for this board */ unsigned long bi_boot_params; /* where this board expects params */ unsigned long bi_memstart; /* start of DRAM memory */ diff --git a/arch/openrisc/lib/board.c b/arch/openrisc/lib/board.c index 391d1e1..2346685 100644 --- a/arch/openrisc/lib/board.c +++ b/arch/openrisc/lib/board.c @@ -84,7 +84,6 @@ void board_init(void) bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; #endif - bd->bi_baudrate = CONFIG_BAUDRATE; for (i = 0; i < ARRAY_SIZE(init_sequence); i++) { WATCHDOG_RESET(); diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile index 4094785..ad26b43 100644 --- a/arch/powerpc/cpu/mpc85xx/Makefile +++ b/arch/powerpc/cpu/mpc85xx/Makefile @@ -44,6 +44,7 @@ obj-$(CONFIG_PPC_P5020) += p5020_ids.o obj-$(CONFIG_PPC_P5040) += p5040_ids.o obj-$(CONFIG_PPC_T4240) += t4240_ids.o obj-$(CONFIG_PPC_T4160) += t4240_ids.o +obj-$(CONFIG_PPC_T4080) += t4240_ids.o obj-$(CONFIG_PPC_B4420) += b4860_ids.o obj-$(CONFIG_PPC_B4860) += b4860_ids.o obj-$(CONFIG_PPC_T1040) += t1040_ids.o @@ -88,6 +89,7 @@ obj-$(CONFIG_PPC_P5020) += p5020_serdes.o obj-$(CONFIG_PPC_P5040) += p5040_serdes.o obj-$(CONFIG_PPC_T4240) += t4240_serdes.o obj-$(CONFIG_PPC_T4160) += t4240_serdes.o +obj-$(CONFIG_PPC_T4080) += t4240_serdes.o obj-$(CONFIG_PPC_B4420) += b4860_serdes.o obj-$(CONFIG_PPC_B4860) += b4860_serdes.o obj-$(CONFIG_BSC9132) += bsc9132_serdes.o diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 9d8acd0..3d37a76 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -299,6 +299,9 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #ifdef CONFIG_SYS_FSL_ERRATUM_A007212 check_erratum_a007212(); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A005434 + puts("Work-around for Erratum A-005434 enabled\n"); +#endif return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c index 12e8e10..684d400 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu.c +++ b/arch/powerpc/cpu/mpc85xx/cpu.c @@ -77,6 +77,30 @@ int checkcpu (void) major = SVR_MAJ(svr); minor = SVR_MIN(svr); +#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500) + if (SVR_SOC_VER(svr) == SVR_T4080) { + ccsr_rcpm_t *rcpm = + (void __iomem *)(CONFIG_SYS_FSL_CORENET_RCPM_ADDR); + + setbits_be32(&gur->devdisr2, FSL_CORENET_DEVDISR2_DTSEC1_6 || + FSL_CORENET_DEVDISR2_DTSEC1_9); + setbits_be32(&gur->devdisr3, FSL_CORENET_DEVDISR3_PCIE3); + setbits_be32(&gur->devdisr5, FSL_CORENET_DEVDISR5_DDR3); + + /* It needs SW to disable core4~7 as HW design sake on T4080 */ + for (i = 4; i < 8; i++) + cpu_disable(i); + + /* request core4~7 into PH20 state, prior to entering PCL10 + * state, all cores in cluster should be placed in PH20 state. + */ + setbits_be32(&rcpm->pcph20setr, 0xf0); + + /* put the 2nd cluster into PCL10 state */ + setbits_be32(&rcpm->clpcl10setr, 1 << 1); + } +#endif + if (cpu_numcores() > 1) { #ifndef CONFIG_MP puts("Unicore software on multiprocessor system!!\n" diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c index 36ef232..d6cf885 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c @@ -368,12 +368,12 @@ void fsl_erratum_a007212_workaround(void) } #endif -void cpu_init_f (void) +ulong cpu_init_f(void) { + ulong flag = 0; extern void m8560_cpm_reset (void); #ifdef CONFIG_SYS_DCSRBAR_PHYS ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); #endif #if defined(CONFIG_SECURE_BOOT) struct law_entry law; @@ -442,13 +442,14 @@ void cpu_init_f (void) #ifdef CONFIG_DEEP_SLEEP /* disable the console if boot from deep sleep */ if (in_be32(&gur->scrtsr[0]) & (1 << 3)) - gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE; + flag = GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE; #endif #endif #ifdef CONFIG_SYS_FSL_ERRATUM_A007212 fsl_erratum_a007212_workaround(); #endif + return flag; } /* Implement a dummy function for those platforms w/o SERDES */ @@ -462,10 +463,17 @@ __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void); int enable_cluster_l2(void) { int i = 0; - u32 cluster; + u32 cluster, svr = get_svr(); ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); struct ccsr_cluster_l2 __iomem *l2cache; + /* only the L2 of first cluster should be enabled as expected on T4080, + * but there is no EOC in the first cluster as HW sake, so return here + * to skip enabling L2 cache of the 2nd cluster. + */ + if (SVR_SOC_VER(svr) == SVR_T4080) + return 0; + cluster = in_be32(&gur->tp_cluster[i].lower); if (cluster & TP_CLUSTER_EOC) return 0; @@ -888,6 +896,7 @@ skip_l2: } #endif + init_used_tlb_cams(); return 0; } diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c index 998781b..47b712d 100644 --- a/arch/powerpc/cpu/mpc85xx/cpu_init_early.c +++ b/arch/powerpc/cpu/mpc85xx/cpu_init_early.c @@ -102,11 +102,13 @@ void cpu_init_early_f(void *fdt) for (i = 0; i < sizeof(gd_t); i++) ((char *)gd)[i] = 0; +#ifdef CONFIG_QEMU_E500 /* * CONFIG_SYS_CCSRBAR_PHYS below may use gd->fdt_blob on ePAPR systems, * so we need to populate it before it accesses it. */ gd->fdt_blob = fdt; +#endif mas0 = MAS0_TLBSEL(1) | MAS0_ESEL(13); mas1 = MAS1_VALID | MAS1_TID(0) | MAS1_TS | MAS1_TSIZE(BOOKE_PAGESZ_1M); diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c index 0cc21c7..ed80a84 100644 --- a/arch/powerpc/cpu/mpc85xx/fdt.c +++ b/arch/powerpc/cpu/mpc85xx/fdt.c @@ -674,7 +674,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_CPM2 do_fixup_by_compat_u32(blob, "fsl,cpm2-scc-uart", - "current-speed", bd->bi_baudrate, 1); + "current-speed", gd->baudrate, 1); do_fixup_by_compat_u32(blob, "fsl,cpm2-brg", "clock-frequency", bd->bi_brgfreq, 1); diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c index d516d4e..3236f6a 100644 --- a/arch/powerpc/cpu/mpc85xx/speed.c +++ b/arch/powerpc/cpu/mpc85xx/speed.c @@ -123,7 +123,8 @@ void get_sys_info(sys_info_t *sys_info) * T4240/T4160 Rev1.0. eg. It's 12 in Rev1.0, however, for Rev2.0 * it uses 6. */ -#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) +#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) || \ + defined(CONFIG_PPC_T4080) if (SVR_MAJ(get_svr()) >= 2) mem_pll_rat *= 2; #endif diff --git a/arch/powerpc/cpu/mpc85xx/spl_minimal.c b/arch/powerpc/cpu/mpc85xx/spl_minimal.c index 9e4c6c9..cc45f71 100644 --- a/arch/powerpc/cpu/mpc85xx/spl_minimal.c +++ b/arch/powerpc/cpu/mpc85xx/spl_minimal.c @@ -12,7 +12,7 @@ DECLARE_GLOBAL_DATA_PTR; -void cpu_init_f(void) +ulong cpu_init_f(void) { #ifdef CONFIG_SYS_INIT_L2_ADDR ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR; @@ -27,6 +27,8 @@ void cpu_init_f(void) out_be32(&l2cache->l2ctl, (MPC85xx_L2CTL_L2E | MPC85xx_L2CTL_L2SRAM_ENTIRE)); #endif + + return 0; } #ifndef CONFIG_SYS_FSL_TBCLK_DIV diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 0e3c86a..d8c9fb6 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -314,7 +314,7 @@ l2_disabled: #endif mtspr HID0,r0 -#ifndef CONFIG_E500MC +#if !defined(CONFIG_E500MC) && !defined(CONFIG_QEMU_E500) li r0,(HID1_ASTME|HID1_ABE)@l /* Addr streaming & broadcast */ mfspr r3,PVR andi. r3,r3, 0xff @@ -1158,7 +1158,7 @@ _start_cont: mtmsr r3 isync - bl cpu_init_f + bl cpu_init_f /* return boot_flag for calling board_init_f */ bl board_init_f isync diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c index f181315..1a3cb33 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_ids.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c @@ -64,11 +64,13 @@ struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = { }; #endif +#ifdef CONFIG_SYS_SRIO struct srio_liodn_id_table srio_liodn_tbl[] = { SET_SRIO_LIODN_BASE(1, 307), SET_SRIO_LIODN_BASE(2, 387), }; int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl); +#endif struct liodn_id_table liodn_tbl[] = { #ifdef CONFIG_SYS_DPAA_QBMAN diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c index ff55e3c..1f99a0a 100644 --- a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c +++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c @@ -172,7 +172,7 @@ static const struct serdes_config serdes4_cfg_tbl[] = { {18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}}, {} }; -#elif defined(CONFIG_PPC_T4160) +#elif defined(CONFIG_PPC_T4160) || defined(CONFIG_PPC_T4080) static const struct serdes_config serdes1_cfg_tbl[] = { /* SerDes 1 */ {1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9, diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds index d77a6dc..f933b21 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds @@ -4,7 +4,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include "config.h" /* CONFIG_BOARDDIR */ +#include "config.h" #ifndef CONFIG_SYS_MONITOR_LEN #define CONFIG_SYS_MONITOR_LEN 0x80000 diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds index 844f7e9..b83c553 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds @@ -7,7 +7,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include "config.h" /* CONFIG_BOARDDIR */ +#include "config.h" OUTPUT_ARCH(powerpc) SECTIONS diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds index 8453f3a..5ae7b3e 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot-spl.lds @@ -7,7 +7,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include "config.h" /* CONFIG_BOARDDIR */ +#include "config.h" OUTPUT_ARCH(powerpc) #ifdef CONFIG_SYS_MPC85XX_NO_RESETVEC diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds index 0b9086d..2cf0b25 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds @@ -4,7 +4,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include "config.h" /* CONFIG_BOARDDIR */ +#include "config.h" #ifdef CONFIG_RESET_VECTOR_ADDRESS #define RESET_VECTOR_ADDRESS CONFIG_RESET_VECTOR_ADDRESS diff --git a/arch/powerpc/cpu/mpc86xx/start.S b/arch/powerpc/cpu/mpc86xx/start.S index e33672a..ec5f4a7 100644 --- a/arch/powerpc/cpu/mpc86xx/start.S +++ b/arch/powerpc/cpu/mpc86xx/start.S @@ -273,6 +273,7 @@ diag_done: /* bl l2cache_enable */ /* run 1st part of board init code (from Flash) */ + li r3, 0 /* clear boot_flag for calling board_init_f */ bl board_init_f sync diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c index 35795c4..15561a1 100644 --- a/arch/powerpc/cpu/mpc8xxx/cpu.c +++ b/arch/powerpc/cpu/mpc8xxx/cpu.c @@ -62,10 +62,12 @@ static struct cpu_type cpu_type_list[] = { CPU_TYPE_ENTRY(T4240, T4240, 0), CPU_TYPE_ENTRY(T4120, T4120, 0), CPU_TYPE_ENTRY(T4160, T4160, 0), + CPU_TYPE_ENTRY(T4080, T4080, 4), CPU_TYPE_ENTRY(B4860, B4860, 0), CPU_TYPE_ENTRY(G4860, G4860, 0), CPU_TYPE_ENTRY(G4060, G4060, 0), CPU_TYPE_ENTRY(B4440, B4440, 0), + CPU_TYPE_ENTRY(B4460, B4460, 0), CPU_TYPE_ENTRY(G4440, G4440, 0), CPU_TYPE_ENTRY(B4420, B4420, 0), CPU_TYPE_ENTRY(B4220, B4220, 0), @@ -176,7 +178,7 @@ struct cpu_type *identify_cpu(u32 ver) /* * Return a 32-bit mask indicating which cores are present on this SOC. */ -u32 cpu_mask(void) +__weak u32 cpu_mask(void) { ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR; struct cpu_type *cpu = gd->arch.cpu; @@ -195,7 +197,7 @@ u32 cpu_mask(void) /* * Return the number of cores on this SOC. */ -int cpu_numcores(void) +__weak int cpu_numcores(void) { struct cpu_type *cpu = gd->arch.cpu; diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 864e74c..34fc8fb 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -247,7 +247,9 @@ #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 #define CONFIG_SYS_FSL_ERRATUM_A005125 +#ifndef CONFIG_USB_MAX_CONTROLLER_COUNT #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 +#endif #elif defined(CONFIG_P1021) #define CONFIG_MAX_CPUS 2 @@ -591,11 +593,13 @@ #define CONFIG_SYS_FSL_ESDHC_P1010_BROKEN_SDCLK #define CONFIG_SYS_FSL_PCIE_COMPAT "fsl,qoriq-pcie-v2.2" #define CONFIG_SYS_FSL_ERRATUM_A005125 +#define CONFIG_SYS_FSL_ERRATUM_A005434 #define CONFIG_SYS_FSL_ERRATUM_I2C_A004447 #define CONFIG_SYS_FSL_A004447_SVR_REV 0x11 #define CONFIG_ESDHC_HC_BLK_ADDR -#elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) +#elif defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) || \ + defined(CONFIG_PPC_T4080) #define CONFIG_E6500 #define CONFIG_SYS_PPC64 /* 64-bit core */ #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ @@ -611,13 +615,18 @@ #define CONFIG_SYS_NUM_FM2_10GEC 2 #define CONFIG_NUM_DDR_CONTROLLERS 3 #else -#define CONFIG_MAX_CPUS 8 -#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1 } -#define CONFIG_SYS_NUM_FM1_DTSEC 7 +#define CONFIG_SYS_NUM_FM1_DTSEC 6 #define CONFIG_SYS_NUM_FM1_10GEC 1 -#define CONFIG_SYS_NUM_FM2_DTSEC 7 +#define CONFIG_SYS_NUM_FM2_DTSEC 8 #define CONFIG_SYS_NUM_FM2_10GEC 1 #define CONFIG_NUM_DDR_CONTROLLERS 2 +#if defined(CONFIG_PPC_T4160) +#define CONFIG_MAX_CPUS 8 +#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1, 1 } +#elif defined(CONFIG_PPC_T4080) +#define CONFIG_MAX_CPUS 4 +#define CONFIG_SYS_FSL_CLUSTER_CLOCKS { 1 } +#endif #endif #define CONFIG_SYS_FSL_NUM_CC_PLLS 5 #define CONFIG_SYS_FSL_NUM_LAWS 32 @@ -798,6 +807,9 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define CONFIG_SYS_FSL_SFP_VER_3_0 #define CONFIG_SYS_FSL_ISBC_VER 2 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 +#define CONFIG_SYS_FSL_ERRATUM_A006261 +#define CONFIG_SYS_FSL_ERRATUM_A006593 +#define CONFIG_SYS_FSL_ERRATUM_A006379 #define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE diff --git a/arch/powerpc/include/asm/fsl_errata.h b/arch/powerpc/include/asm/fsl_errata.h index 4eba85c..64da4bb 100644 --- a/arch/powerpc/include/asm/fsl_errata.h +++ b/arch/powerpc/include/asm/fsl_errata.h @@ -16,6 +16,7 @@ static inline bool has_erratum_a006379(void) u32 svr = get_svr(); if (((SVR_SOC_VER(svr) == SVR_T4240) && SVR_MAJ(svr) <= 1) || ((SVR_SOC_VER(svr) == SVR_T4160) && SVR_MAJ(svr) <= 1) || + ((SVR_SOC_VER(svr) == SVR_T4080) && SVR_MAJ(svr) <= 1) || ((SVR_SOC_VER(svr) == SVR_B4860) && SVR_MAJ(svr) <= 2) || ((SVR_SOC_VER(svr) == SVR_B4420) && SVR_MAJ(svr) <= 2) || ((SVR_SOC_VER(svr) == SVR_T2080) && SVR_MAJ(svr) <= 1) || @@ -49,9 +50,13 @@ static inline bool has_erratum_a006261(void) return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); case SVR_T4240: case SVR_T4160: + case SVR_T4080: return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); case SVR_T1040: return IS_SVR_REV(svr, 1, 0); + case SVR_T2080: + case SVR_T2081: + return IS_SVR_REV(svr, 1, 0); case SVR_P5040: return IS_SVR_REV(svr, 1, 0); } diff --git a/arch/powerpc/include/asm/fsl_secure_boot.h b/arch/powerpc/include/asm/fsl_secure_boot.h index 29bef91..74c5d8f 100644 --- a/arch/powerpc/include/asm/fsl_secure_boot.h +++ b/arch/powerpc/include/asm/fsl_secure_boot.h @@ -20,8 +20,9 @@ #if defined(CONFIG_B4860QDS) || \ defined(CONFIG_T4240QDS) || \ defined(CONFIG_T2080QDS) || \ + defined(CONFIG_T2080RDB) || \ defined(CONFIG_T1040QDS) || \ - defined(CONFIG_T1040RDB) + defined(CONFIG_T104xRDB) #define CONFIG_SYS_CPC_REINIT_F #undef CONFIG_SYS_INIT_L3_ADDR #define CONFIG_SYS_INIT_L3_ADDR 0xbff00000 diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h index 741b861..eff573b 100644 --- a/arch/powerpc/include/asm/immap_85xx.h +++ b/arch/powerpc/include/asm/immap_85xx.h @@ -1748,7 +1748,8 @@ typedef struct ccsr_gur { /* use reserved bits 18~23 as scratch space to host DDR PLL ratio */ #define FSL_CORENET_RCWSR0_MEM_PLL_RAT_RESV_SHIFT 8 #define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x3f -#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) +#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) || \ + defined(CONFIG_PPC_T4080) #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfc000000 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 26 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000 @@ -1848,7 +1849,8 @@ defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022) #define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII 0x00100000 #define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_NONE 0x00180000 #endif -#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) +#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) || \ + defined(CONFIG_PPC_T4080) #define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */ #define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000 #define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000 diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h index 72f30fe..edd7375 100644 --- a/arch/powerpc/include/asm/processor.h +++ b/arch/powerpc/include/asm/processor.h @@ -1111,11 +1111,13 @@ #define SVR_T4240 0x824000 #define SVR_T4120 0x824001 #define SVR_T4160 0x824100 +#define SVR_T4080 0x824102 #define SVR_C291 0x850000 #define SVR_C292 0x850020 #define SVR_C293 0x850030 #define SVR_B4860 0X868000 #define SVR_G4860 0x868001 +#define SVR_B4460 0x868003 #define SVR_G4060 0x868003 #define SVR_B4440 0x868100 #define SVR_G4440 0x868101 diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h index f4d4a6b..e1b566f 100644 --- a/arch/powerpc/include/asm/u-boot.h +++ b/arch/powerpc/include/asm/u-boot.h @@ -64,7 +64,6 @@ typedef struct bd_info { unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ #endif - unsigned int bi_baudrate; /* Console Baudrate */ #if defined(CONFIG_405) || \ defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || \ diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index 8b03d3a..57b4a09 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -547,7 +547,6 @@ void board_init_f(ulong bootflag) bd->bi_ipbfreq = gd->arch.ipb_clk; bd->bi_pcifreq = gd->pci_clk; #endif /* CONFIG_MPC5xxx */ - bd->bi_baudrate = gd->baudrate; /* Console Baudrate */ #ifdef CONFIG_SYS_EXTBDINFO strncpy((char *) bd->bi_s_version, "1.2", sizeof(bd->bi_s_version)); diff --git a/arch/sandbox/config.mk b/arch/sandbox/config.mk index e094ae2..c3f889f 100644 --- a/arch/sandbox/config.mk +++ b/arch/sandbox/config.mk @@ -18,3 +18,9 @@ cmd_u-boot__ = $(CC) -o $@ -T u-boot.lds \ $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map CONFIG_ARCH_DEVICE_TREE := sandbox + +# Define this to avoid linking with SDL, which requires SDL libraries +# This can solve 'sdl-config: Command not found' errors +ifneq ($(NO_SDL),) +PLATFORM_CPPFLAGS += -DSANDBOX_NO_SDL +endif diff --git a/arch/sandbox/dts/.gitignore b/arch/sandbox/dts/.gitignore new file mode 100644 index 0000000..b60ed20 --- /dev/null +++ b/arch/sandbox/dts/.gitignore @@ -0,0 +1 @@ +*.dtb diff --git a/arch/sandbox/include/asm/config.h b/arch/sandbox/include/asm/config.h index ec7729e..6c1bff9 100644 --- a/arch/sandbox/include/asm/config.h +++ b/arch/sandbox/include/asm/config.h @@ -7,6 +7,7 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ +#define CONFIG_SYS_GENERIC_GLOBAL_DATA #define CONFIG_SANDBOX_ARCH /* Used by drivers/spi/sandbox_spi.c and arch/sandbox/include/asm/state.h */ diff --git a/arch/sh/include/asm/u-boot.h b/arch/sh/include/asm/u-boot.h index 81d5161..ea37c24 100644 --- a/arch/sh/include/asm/u-boot.h +++ b/arch/sh/include/asm/u-boot.h @@ -20,7 +20,6 @@ typedef struct bd_info { unsigned long bi_flashoffset; /* reserved area for startup monitor */ unsigned long bi_sramstart; /* start of SRAM memory */ unsigned long bi_sramsize; /* size of SRAM memory */ - unsigned int bi_baudrate; /* Console Baudrate */ unsigned long bi_boot_params; /* where this board expects params */ } bd_t; diff --git a/arch/sh/lib/board.c b/arch/sh/lib/board.c index 8498153..1eb7afb 100644 --- a/arch/sh/lib/board.c +++ b/arch/sh/lib/board.c @@ -155,7 +155,6 @@ void sh_generic_init(void) bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; #endif - bd->bi_baudrate = CONFIG_BAUDRATE; for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { WATCHDOG_RESET(); diff --git a/arch/sparc/cpu/leon2/cpu_init.c b/arch/sparc/cpu/leon2/cpu_init.c index de310fb..6e07fe6 100644 --- a/arch/sparc/cpu/leon2/cpu_init.c +++ b/arch/sparc/cpu/leon2/cpu_init.c @@ -13,6 +13,9 @@ #include <config.h> +#define TIMER_BASE_CLK 1000000 +#define US_PER_TICK (1000000 / CONFIG_SYS_HZ) + DECLARE_GLOBAL_DATA_PTR; /* reset CPU (jump to 0, without reset) */ @@ -90,7 +93,7 @@ void cpu_wait_ticks(unsigned long ticks) while (get_timer(start) < ticks) ; } -/* initiate and setup timer0 interrupt to 1MHz +/* initiate and setup timer0 interrupt to configured HZ. Base clock is 1MHz. * Return irq number for timer int or a negative number for * dealing with self */ @@ -98,28 +101,31 @@ int timer_interrupt_init_cpu(void) { LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS; - /* 1ms ticks */ + /* SYS_HZ ticks per second */ leon2->Timer_Counter_1 = 0; - leon2->Timer_Reload_1 = 999; /* (((1000000 / 100) - 1)) */ + leon2->Timer_Reload_1 = (TIMER_BASE_CLK / CONFIG_SYS_HZ) - 1; leon2->Timer_Control_1 = (LEON2_TIMER_CTRL_EN | LEON2_TIMER_CTRL_RS | LEON2_TIMER_CTRL_LD); return LEON2_TIMER1_IRQNO; } +ulong get_tbclk(void) +{ + return TIMER_BASE_CLK; +} + /* * This function is intended for SHORT delays only. */ unsigned long cpu_usec2ticks(unsigned long usec) { - /* timer set to 1kHz ==> 1 clk tick = 1 msec */ - if (usec < 1000) + if (usec < US_PER_TICK) return 1; - return (usec / 1000); + return usec / US_PER_TICK; } unsigned long cpu_ticks2usec(unsigned long ticks) { - /* 1tick = 1usec */ - return ticks * 1000; + return ticks * US_PER_TICK; } diff --git a/arch/sparc/cpu/leon3/cpu_init.c b/arch/sparc/cpu/leon3/cpu_init.c index 4720f42..2f41d88 100644 --- a/arch/sparc/cpu/leon3/cpu_init.c +++ b/arch/sparc/cpu/leon3/cpu_init.c @@ -14,6 +14,9 @@ #include <config.h> +#define TIMER_BASE_CLK 1000000 +#define US_PER_TICK (1000000 / CONFIG_SYS_HZ) + DECLARE_GLOBAL_DATA_PTR; /* reset CPU (jump to 0, without reset) */ @@ -203,15 +206,15 @@ void cpu_wait_ticks(unsigned long ticks) while (get_timer(start) < ticks) ; } -/* initiate and setup timer0 interrupt to 1MHz +/* initiate and setup timer0 interrupt to configured HZ. Base clock is 1MHz. * Return irq number for timer int or a negative number for * dealing with self */ int timer_interrupt_init_cpu(void) { - /* 1ms ticks */ + /* SYS_HZ ticks per second */ gptimer->e[0].val = 0; - gptimer->e[0].rld = 999; /* (((1000000 / 100) - 1)) */ + gptimer->e[0].rld = (TIMER_BASE_CLK / CONFIG_SYS_HZ) - 1; gptimer->e[0].ctrl = (LEON3_GPTIMER_EN | LEON3_GPTIMER_RL | LEON3_GPTIMER_LD | LEON3_GPTIMER_IRQEN); @@ -219,19 +222,22 @@ int timer_interrupt_init_cpu(void) return gptimer_irq; } +ulong get_tbclk(void) +{ + return TIMER_BASE_CLK; +} + /* * This function is intended for SHORT delays only. */ unsigned long cpu_usec2ticks(unsigned long usec) { - /* timer set to 1kHz ==> 1 clk tick = 1 msec */ - if (usec < 1000) + if (usec < US_PER_TICK) return 1; - return (usec / 1000); + return usec / US_PER_TICK; } unsigned long cpu_ticks2usec(unsigned long ticks) { - /* 1tick = 1usec */ - return ticks * 1000; + return ticks * US_PER_TICK; } diff --git a/arch/sparc/include/asm/u-boot.h b/arch/sparc/include/asm/u-boot.h index 66cf4b0..5f12e58 100644 --- a/arch/sparc/include/asm/u-boot.h +++ b/arch/sparc/include/asm/u-boot.h @@ -40,7 +40,6 @@ typedef struct bd_info { unsigned short bi_ethspeed; /* Ethernet speed in Mbps */ unsigned long bi_intfreq; /* Internal Freq, in MHz */ unsigned long bi_busfreq; /* Bus Freq, in MHz */ - unsigned int bi_baudrate; /* Console Baudrate */ } bd_t; #endif /* __ASSEMBLY__ */ diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c index c778ba2..b311a94 100644 --- a/arch/sparc/lib/board.c +++ b/arch/sparc/lib/board.c @@ -173,7 +173,6 @@ void board_init_f(ulong bootflag) bd->bi_sramstart = CONFIG_SYS_SRAM_BASE; bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE; #endif - bd->bi_baudrate = CONFIG_BAUDRATE; bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */ gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ diff --git a/board/amcc/acadia/acadia.c b/board/amcc/acadia/acadia.c index 9c6deea..2eb18df 100644 --- a/board/amcc/acadia/acadia.c +++ b/board/amcc/acadia/acadia.c @@ -39,12 +39,10 @@ int board_early_init_f(void) { unsigned int reg; -#if !defined(CONFIG_NAND_U_BOOT) /* don't reinit PLL when booting via I2C bootstrap option */ mfsdr(SDR0_PINSTP, reg); if (reg != 0xf0000000) board_pll_init_f(); -#endif acadia_gpio_init(); diff --git a/board/amcc/acadia/u-boot-nand.lds b/board/amcc/acadia/u-boot-nand.lds deleted file mode 100644 index 9a331c5..0000000 --- a/board/amcc/acadia/u-boot-nand.lds +++ /dev/null @@ -1,87 +0,0 @@ -/* - * (C) Copyright 2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/ppc4xx/start.o (.text*) - - /* Align to next NAND block */ - . = ALIGN(0x4000); - common/env_embedded.o (.ppcenv) - /* Keep some space here for redundant env and potential bad env blocks */ - . = ALIGN(0x10000); - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - KEEP(*(.got)) - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/bamboo/u-boot-nand.lds b/board/amcc/bamboo/u-boot-nand.lds deleted file mode 100644 index 5e84369..0000000 --- a/board/amcc/bamboo/u-boot-nand.lds +++ /dev/null @@ -1,88 +0,0 @@ -/* - * (C) Copyright 2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/ppc4xx/start.o (.text*) - board/amcc/bamboo/init.o (.text*) - - /* Align to next NAND block */ - . = ALIGN(0x4000); - common/env_embedded.o (.ppcenv) - /* Keep some space here for redundant env and potential bad env blocks */ - . = ALIGN(0x10000); - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - KEEP(*(.got)) - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/canyonlands/u-boot-nand.lds b/board/amcc/canyonlands/u-boot-nand.lds deleted file mode 100644 index 31a2123..0000000 --- a/board/amcc/canyonlands/u-boot-nand.lds +++ /dev/null @@ -1,88 +0,0 @@ -/* - * (C) Copyright 2008 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/ppc4xx/start.o (.text) - board/amcc/canyonlands/init.o (.text*) - - /* Align to next NAND block */ - . = ALIGN(0x20000); - common/env_embedded.o (.ppcenv) - /* Keep some space here for redundant env and potential bad env blocks */ - . = ALIGN(0x80000); - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - KEEP(*(.got)) - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/kilauea/u-boot-nand.lds b/board/amcc/kilauea/u-boot-nand.lds deleted file mode 100644 index 9a331c5..0000000 --- a/board/amcc/kilauea/u-boot-nand.lds +++ /dev/null @@ -1,87 +0,0 @@ -/* - * (C) Copyright 2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/ppc4xx/start.o (.text*) - - /* Align to next NAND block */ - . = ALIGN(0x4000); - common/env_embedded.o (.ppcenv) - /* Keep some space here for redundant env and potential bad env blocks */ - . = ALIGN(0x10000); - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - KEEP(*(.got)) - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds deleted file mode 100644 index f4d752c..0000000 --- a/board/amcc/sequoia/u-boot-nand.lds +++ /dev/null @@ -1,88 +0,0 @@ -/* - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/ppc4xx/start.o (.text) - board/amcc/sequoia/init.o (.text*) - - /* Align to next NAND block */ - . = ALIGN(0x4000); - common/env_embedded.o (.ppcenv) - /* Keep some space here for redundant env and potential bad env blocks */ - . = ALIGN(0x10000); - - *(.text*) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - KEEP(*(.got)) - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/armadeus/apf27/fpga.c b/board/armadeus/apf27/fpga.c index 0c08c06..65a4812 100644 --- a/board/armadeus/apf27/fpga.c +++ b/board/armadeus/apf27/fpga.c @@ -26,7 +26,7 @@ * Spartan2 code is used to download our Spartan 3 :) code is compatible. * Just take care about the file size */ -Xilinx_Spartan3_Slave_Parallel_fns fpga_fns = { +xilinx_spartan3_slave_parallel_fns fpga_fns = { fpga_pre_fn, fpga_pgm_fn, fpga_init_fn, @@ -42,12 +42,13 @@ Xilinx_Spartan3_Slave_Parallel_fns fpga_fns = { fpga_post_fn, }; -Xilinx_desc fpga[CONFIG_FPGA_COUNT] = { - {Xilinx_Spartan3, +xilinx_desc fpga[CONFIG_FPGA_COUNT] = { + {xilinx_spartan3, slave_parallel, 1196128l/8, (void *)&fpga_fns, 0, + &spartan3_op, "3s200aft256"} }; diff --git a/board/astro/mcf5373l/fpga.c b/board/astro/mcf5373l/fpga.c index c679ad7..1d044d9 100644 --- a/board/astro/mcf5373l/fpga.c +++ b/board/astro/mcf5373l/fpga.c @@ -203,7 +203,7 @@ int astro5373l_altera_load(void) } /* Set the FPGA's PROG_B line to the specified level */ -int xilinx_pgm_fn(int assert, int flush, int cookie) +int xilinx_pgm_config_fn(int assert, int flush, int cookie) { gpio_t *gpiop = (gpio_t *)MMAP_GPIO; @@ -218,7 +218,7 @@ int xilinx_pgm_fn(int assert, int flush, int cookie) * Test the state of the active-low FPGA INIT line. Return 1 on INIT * asserted (low). */ -int xilinx_init_fn(int cookie) +int xilinx_init_config_fn(int cookie) { gpio_t *gpiop = (gpio_t *)MMAP_GPIO; @@ -226,7 +226,7 @@ int xilinx_init_fn(int cookie) } /* Test the state of the active-high FPGA DONE pin */ -int xilinx_done_fn(int cookie) +int xilinx_done_config_fn(int cookie) { gpio_t *gpiop = (gpio_t *)MMAP_GPIO; @@ -234,7 +234,7 @@ int xilinx_done_fn(int cookie) } /* Abort an FPGA operation */ -int xilinx_abort_fn(int cookie) +int xilinx_abort_config_fn(int cookie) { gpio_t *gpiop = (gpio_t *)MMAP_GPIO; /* ensure all SPI peripherals and FPGAs are deselected */ @@ -300,7 +300,7 @@ int xilinx_post_config_fn(int cookie) return rc; } -int xilinx_clk_fn(int assert_clk, int flush, int cookie) +int xilinx_clk_config_fn(int assert_clk, int flush, int cookie) { gpio_t *gpiop = (gpio_t *)MMAP_GPIO; @@ -311,7 +311,7 @@ int xilinx_clk_fn(int assert_clk, int flush, int cookie) return assert_clk; } -int xilinx_wr_fn(int assert_write, int flush, int cookie) +int xilinx_wr_config_fn(int assert_write, int flush, int cookie) { gpio_t *gpiop = (gpio_t *)MMAP_GPIO; @@ -322,7 +322,7 @@ int xilinx_wr_fn(int assert_write, int flush, int cookie) return assert_write; } -int xilinx_fastwr_fn(void *buf, size_t len, int flush, int cookie) +int xilinx_fastwr_config_fn(void *buf, size_t len, int flush, int cookie) { size_t bytecount = 0; gpio_t *gpiop = (gpio_t *)MMAP_GPIO; @@ -363,23 +363,24 @@ int xilinx_fastwr_fn(void *buf, size_t len, int flush, int cookie) * relocated at runtime. * FIXME: relocation not yet working for coldfire, see below! */ -Xilinx_Spartan3_Slave_Serial_fns xilinx_fns = { +xilinx_spartan3_slave_serial_fns xilinx_fns = { xilinx_pre_config_fn, - xilinx_pgm_fn, - xilinx_clk_fn, - xilinx_init_fn, - xilinx_done_fn, - xilinx_wr_fn, + xilinx_pgm_config_fn, + xilinx_clk_config_fn, + xilinx_init_config_fn, + xilinx_done_config_fn, + xilinx_wr_config_fn, 0, - xilinx_fastwr_fn + xilinx_fastwr_config_fn }; -Xilinx_desc xilinx_fpga[CONFIG_FPGA_COUNT] = { - {Xilinx_Spartan3, +xilinx_desc xilinx_fpga[CONFIG_FPGA_COUNT] = { + {xilinx_spartan3, slave_serial, XILINX_XC3S4000_SIZE, (void *)&xilinx_fns, - 0} + 0, + &spartan3_op} }; /* Initialize the fpga. Return 1 on success, 0 on failure. */ @@ -395,12 +396,12 @@ int astro5373l_xilinx_load(void) * so set stuff here instead of static initialisation: */ xilinx_fns.pre = xilinx_pre_config_fn; - xilinx_fns.pgm = xilinx_pgm_fn; - xilinx_fns.clk = xilinx_clk_fn; - xilinx_fns.init = xilinx_init_fn; - xilinx_fns.done = xilinx_done_fn; - xilinx_fns.wr = xilinx_wr_fn; - xilinx_fns.bwr = xilinx_fastwr_fn; + xilinx_fns.pgm = xilinx_pgm_config_fn; + xilinx_fns.clk = xilinx_clk_config_fn; + xilinx_fns.init = xilinx_init_config_fn; + xilinx_fns.done = xilinx_done_config_fn; + xilinx_fns.wr = xilinx_wr_config_fn; + xilinx_fns.bwr = xilinx_fastwr_config_fn; xilinx_fpga[i].iface_fns = (void *)&xilinx_fns; fpga_add(fpga_xilinx, &xilinx_fpga[i]); } diff --git a/board/balloon3/balloon3.c b/board/balloon3/balloon3.c index 04e0574..aa108ca 100644 --- a/board/balloon3/balloon3.c +++ b/board/balloon3/balloon3.c @@ -191,7 +191,7 @@ int fpga_cs_fn(int assert_clk, int flush, int cookie) return assert_clk; } -Xilinx_Spartan3_Slave_Parallel_fns balloon3_fpga_fns = { +xilinx_spartan3_slave_parallel_fns balloon3_fpga_fns = { fpga_pre_config_fn, fpga_pgm_fn, fpga_init_fn, @@ -207,7 +207,7 @@ Xilinx_Spartan3_Slave_Parallel_fns balloon3_fpga_fns = { fpga_post_config_fn, }; -Xilinx_desc fpga = XILINX_XC3S1000_DESC(slave_parallel, +xilinx_desc fpga = XILINX_XC3S1000_DESC(slave_parallel, (void *)&balloon3_fpga_fns, 0); /* Initialize the FPGA */ diff --git a/board/bct-brettl2/bct-brettl2.c b/board/bct-brettl2/bct-brettl2.c index de5b9ff..6be9b18 100644 --- a/board/bct-brettl2/bct-brettl2.c +++ b/board/bct-brettl2/bct-brettl2.c @@ -12,7 +12,6 @@ #include <asm/blackfin.h> #include <asm/portmux.h> #include <asm/gpio.h> -#include <asm/net.h> #include <net.h> #include <netdev.h> #include <miiphy.h> @@ -33,7 +32,7 @@ int checkboard(void) static void board_init_enetaddr(uchar *mac_addr) { puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(mac_addr); + eth_random_addr(mac_addr); eth_setenv_enetaddr("ethaddr", mac_addr); } diff --git a/board/bf518f-ezbrd/bf518f-ezbrd.c b/board/bf518f-ezbrd/bf518f-ezbrd.c index 09a2353..3a94a57 100644 --- a/board/bf518f-ezbrd/bf518f-ezbrd.c +++ b/board/bf518f-ezbrd/bf518f-ezbrd.c @@ -13,7 +13,6 @@ #include <netdev.h> #include <spi.h> #include <asm/blackfin.h> -#include <asm/net.h> #include <asm/portmux.h> #include <asm/mach-common/bits/otp.h> #include <asm/sdh.h> @@ -48,7 +47,7 @@ static void board_init_enetaddr(uchar *mac_addr) if (!valid_mac) { puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(mac_addr); + eth_random_addr(mac_addr); } eth_setenv_enetaddr("ethaddr", mac_addr); diff --git a/board/bf526-ezbrd/bf526-ezbrd.c b/board/bf526-ezbrd/bf526-ezbrd.c index 4695b11..368d6be 100644 --- a/board/bf526-ezbrd/bf526-ezbrd.c +++ b/board/bf526-ezbrd/bf526-ezbrd.c @@ -12,7 +12,6 @@ #include <net.h> #include <netdev.h> #include <asm/blackfin.h> -#include <asm/net.h> #include <asm/mach-common/bits/otp.h> DECLARE_GLOBAL_DATA_PTR; @@ -45,7 +44,7 @@ static void board_init_enetaddr(uchar *mac_addr) if (!valid_mac) { puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(mac_addr); + eth_random_addr(mac_addr); } eth_setenv_enetaddr("ethaddr", mac_addr); diff --git a/board/bf527-ezkit/bf527-ezkit.c b/board/bf527-ezkit/bf527-ezkit.c index 211cf24..88e1869 100644 --- a/board/bf527-ezkit/bf527-ezkit.c +++ b/board/bf527-ezkit/bf527-ezkit.c @@ -13,7 +13,6 @@ #include <netdev.h> #include <asm/blackfin.h> #include <asm/gpio.h> -#include <asm/net.h> #include <asm/mach-common/bits/otp.h> DECLARE_GLOBAL_DATA_PTR; @@ -47,7 +46,7 @@ static void board_init_enetaddr(uchar *mac_addr) if (!valid_mac) { puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(mac_addr); + eth_random_addr(mac_addr); } eth_setenv_enetaddr("ethaddr", mac_addr); diff --git a/board/bf537-minotaur/bf537-minotaur.c b/board/bf537-minotaur/bf537-minotaur.c index 920429c..ca61ef9 100644 --- a/board/bf537-minotaur/bf537-minotaur.c +++ b/board/bf537-minotaur/bf537-minotaur.c @@ -12,7 +12,6 @@ #include <netdev.h> #include <net.h> #include <asm/blackfin.h> -#include <asm/net.h> DECLARE_GLOBAL_DATA_PTR; @@ -27,7 +26,7 @@ int checkboard(void) static void board_init_enetaddr(uchar *mac_addr) { puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(mac_addr); + eth_random_addr(mac_addr); eth_setenv_enetaddr("ethaddr", mac_addr); } diff --git a/board/bf537-pnav/bf537-pnav.c b/board/bf537-pnav/bf537-pnav.c index c512528..df00110 100644 --- a/board/bf537-pnav/bf537-pnav.c +++ b/board/bf537-pnav/bf537-pnav.c @@ -12,7 +12,6 @@ #include <netdev.h> #include <net.h> #include <asm/blackfin.h> -#include <asm/net.h> DECLARE_GLOBAL_DATA_PTR; @@ -27,7 +26,7 @@ int checkboard(void) static void board_init_enetaddr(uchar *mac_addr) { puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(mac_addr); + eth_random_addr(mac_addr); eth_setenv_enetaddr("ethaddr", mac_addr); } diff --git a/board/bf537-srv1/bf537-srv1.c b/board/bf537-srv1/bf537-srv1.c index 04d3891..725296a 100644 --- a/board/bf537-srv1/bf537-srv1.c +++ b/board/bf537-srv1/bf537-srv1.c @@ -12,7 +12,6 @@ #include <netdev.h> #include <net.h> #include <asm/blackfin.h> -#include <asm/net.h> DECLARE_GLOBAL_DATA_PTR; @@ -27,7 +26,7 @@ int checkboard(void) static void board_init_enetaddr(uchar *mac_addr) { puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(mac_addr); + eth_random_addr(mac_addr); eth_setenv_enetaddr("ethaddr", mac_addr); } diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c index 5fdf837..32045a9 100644 --- a/board/bf537-stamp/bf537-stamp.c +++ b/board/bf537-stamp/bf537-stamp.c @@ -13,7 +13,6 @@ #include <config.h> #include <command.h> #include <asm/blackfin.h> -#include <asm/net.h> #include <net.h> #include <asm/mach-common/bits/bootrom.h> #include <netdev.h> @@ -48,7 +47,7 @@ static void board_init_enetaddr(uchar *mac_addr) if (!valid_mac) { puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(mac_addr); + eth_random_addr(mac_addr); } eth_setenv_enetaddr("ethaddr", mac_addr); diff --git a/board/buffalo/lsxl/lsxl.c b/board/buffalo/lsxl/lsxl.c index eca1683..659a124 100644 --- a/board/buffalo/lsxl/lsxl.c +++ b/board/buffalo/lsxl/lsxl.c @@ -231,7 +231,7 @@ static void rescue_mode(void) printf("Entering rescue mode..\n"); #ifdef CONFIG_RANDOM_MACADDR if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { - eth_random_enetaddr(enetaddr); + eth_random_addr(enetaddr); if (eth_setenv_enetaddr("ethaddr", enetaddr)) { printf("Failed to set ethernet address\n"); set_led(LED_ALARM_BLINKING); diff --git a/board/cm-bf527/cm-bf527.c b/board/cm-bf527/cm-bf527.c index a5f70a4..1533eb9 100644 --- a/board/cm-bf527/cm-bf527.c +++ b/board/cm-bf527/cm-bf527.c @@ -11,7 +11,6 @@ #include <net.h> #include <netdev.h> #include <asm/blackfin.h> -#include <asm/net.h> #include <asm/mach-common/bits/otp.h> #include "../cm-bf537e/gpio_cfi_flash.h" @@ -46,7 +45,7 @@ static void board_init_enetaddr(uchar *mac_addr) if (!valid_mac) { puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(mac_addr); + eth_random_addr(mac_addr); } eth_setenv_enetaddr("ethaddr", mac_addr); diff --git a/board/cm-bf537e/cm-bf537e.c b/board/cm-bf537e/cm-bf537e.c index 8daf3ad..e79f90f 100644 --- a/board/cm-bf537e/cm-bf537e.c +++ b/board/cm-bf537e/cm-bf537e.c @@ -12,7 +12,6 @@ #include <net.h> #include <netdev.h> #include <asm/blackfin.h> -#include <asm/net.h> #include "gpio_cfi_flash.h" DECLARE_GLOBAL_DATA_PTR; @@ -32,7 +31,7 @@ static void board_init_enetaddr(char *var) return; printf("Warning: %s: generating 'random' MAC address\n", var); - bfin_gen_rand_mac(enetaddr); + eth_random_addr(enetaddr); eth_setenv_enetaddr(var, enetaddr); } diff --git a/board/cm-bf537u/cm-bf537u.c b/board/cm-bf537u/cm-bf537u.c index 5941b5f..632cbda 100644 --- a/board/cm-bf537u/cm-bf537u.c +++ b/board/cm-bf537u/cm-bf537u.c @@ -12,7 +12,6 @@ #include <net.h> #include <netdev.h> #include <asm/blackfin.h> -#include <asm/net.h> #include "../cm-bf537e/gpio_cfi_flash.h" DECLARE_GLOBAL_DATA_PTR; @@ -32,7 +31,7 @@ static void board_init_enetaddr(char *var) return; printf("Warning: %s: generating 'random' MAC address\n", var); - bfin_gen_rand_mac(enetaddr); + eth_random_addr(enetaddr); eth_setenv_enetaddr(var, enetaddr); } diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds index 5af55e9..94b7076 100644 --- a/board/dave/PPChameleonEVB/u-boot.lds +++ b/board/dave/PPChameleonEVB/u-boot.lds @@ -4,7 +4,7 @@ * SPDX-License-Identifier: GPL-2.0+ */ -#include "config.h" /* CONFIG_BOARDDIR */ +#include "config.h" #ifndef RESET_VECTOR_ADDRESS #define RESET_VECTOR_ADDRESS 0xfffffffc diff --git a/board/dnp5370/dnp5370.c b/board/dnp5370/dnp5370.c index 4b3873b..df721c9 100644 --- a/board/dnp5370/dnp5370.c +++ b/board/dnp5370/dnp5370.c @@ -14,7 +14,6 @@ #include <common.h> #include <config.h> #include <asm/blackfin.h> -#include <asm/net.h> #include <net.h> #include <netdev.h> #include <asm/gpio.h> @@ -55,7 +54,7 @@ static void board_init_enetaddr(uchar *mac_addr) if (!valid_mac) { puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(mac_addr); + eth_random_addr(mac_addr); } eth_setenv_enetaddr("ethaddr", mac_addr); diff --git a/board/esd/pmc440/fpga.c b/board/esd/pmc440/fpga.c index b7b62dd..f876da8 100644 --- a/board/esd/pmc440/fpga.c +++ b/board/esd/pmc440/fpga.c @@ -20,7 +20,7 @@ DECLARE_GLOBAL_DATA_PTR; #define USE_SP_CODE #ifdef USE_SP_CODE -Xilinx_Spartan3_Slave_Parallel_fns pmc440_fpga_fns = { +xilinx_spartan3_slave_parallel_fns pmc440_fpga_fns = { fpga_pre_config_fn, fpga_pgm_fn, fpga_init_fn, @@ -36,7 +36,7 @@ Xilinx_Spartan3_Slave_Parallel_fns pmc440_fpga_fns = { fpga_post_config_fn, }; #else -Xilinx_Spartan3_Slave_Serial_fns pmc440_fpga_fns = { +xilinx_spartan3_slave_serial_fns pmc440_fpga_fns = { fpga_pre_config_fn, fpga_pgm_fn, fpga_clk_fn, @@ -47,7 +47,7 @@ Xilinx_Spartan3_Slave_Serial_fns pmc440_fpga_fns = { }; #endif -Xilinx_Spartan2_Slave_Serial_fns ngcc_fpga_fns = { +xilinx_spartan2_slave_serial_fns ngcc_fpga_fns = { ngcc_fpga_pre_config_fn, ngcc_fpga_pgm_fn, ngcc_fpga_clk_fn, @@ -57,7 +57,7 @@ Xilinx_Spartan2_Slave_Serial_fns ngcc_fpga_fns = { ngcc_fpga_post_config_fn }; -Xilinx_desc fpga[CONFIG_FPGA_COUNT] = { +xilinx_desc fpga[CONFIG_FPGA_COUNT] = { XILINX_XC3S1200E_DESC( #ifdef USE_SP_CODE slave_parallel, diff --git a/board/esd/pmc440/u-boot-nand.lds b/board/esd/pmc440/u-boot-nand.lds deleted file mode 100644 index bd801cc..0000000 --- a/board/esd/pmc440/u-boot-nand.lds +++ /dev/null @@ -1,118 +0,0 @@ -/* - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/ppc4xx/start.o (.text) - - /* Align to next NAND block */ - . = ALIGN(0x4000); - common/env_embedded.o (.ppcenv) - /* Keep some space here for redundant env and potential bad env blocks */ - . = ALIGN(0x10000); - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/freescale/b4860qds/b4860qds.c b/board/freescale/b4860qds/b4860qds.c index d9c88a0..b2d5378 100644 --- a/board/freescale/b4860qds/b4860qds.c +++ b/board/freescale/b4860qds/b4860qds.c @@ -23,6 +23,7 @@ #include "../common/qixis.h" #include "../common/vsc3316_3308.h" #include "../common/idt8t49n222a_serdes_clk.h" +#include "../common/zm7300.h" #include "b4860qds.h" #include "b4860qds_qixis.h" #include "b4860qds_crossbar_con.h" @@ -94,6 +95,238 @@ int select_i2c_ch_pca(u8 ch) return 0; } +/* + * read_voltage from sensor on I2C bus + * We use average of 4 readings, waiting for 532us befor another reading + */ +#define WAIT_FOR_ADC 532 /* wait for 532 microseconds for ADC */ +#define NUM_READINGS 4 /* prefer to be power of 2 for efficiency */ + +static inline int read_voltage(void) +{ + int i, ret, voltage_read = 0; + u16 vol_mon; + + for (i = 0; i < NUM_READINGS; i++) { + ret = i2c_read(I2C_VOL_MONITOR_ADDR, + I2C_VOL_MONITOR_BUS_V_OFFSET, 1, (void *)&vol_mon, 2); + if (ret) { + printf("VID: failed to read core voltage\n"); + return ret; + } + if (vol_mon & I2C_VOL_MONITOR_BUS_V_OVF) { + printf("VID: Core voltage sensor error\n"); + return -1; + } + debug("VID: bus voltage reads 0x%04x\n", vol_mon); + /* LSB = 4mv */ + voltage_read += (vol_mon >> I2C_VOL_MONITOR_BUS_V_SHIFT) * 4; + udelay(WAIT_FOR_ADC); + } + /* calculate the average */ + voltage_read /= NUM_READINGS; + + return voltage_read; +} + +static int adjust_vdd(ulong vdd_override) +{ + int re_enable = disable_interrupts(); + ccsr_gur_t __iomem *gur = + (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 fusesr; + u8 vid; + int vdd_target, vdd_last; + int existing_voltage, temp_voltage, voltage; /* all in 1/10 mV */ + int ret; + unsigned int orig_i2c_speed; + unsigned long vdd_string_override; + char *vdd_string; + static const uint16_t vdd[32] = { + 0, /* unused */ + 9875, /* 0.9875V */ + 9750, + 9625, + 9500, + 9375, + 9250, + 9125, + 9000, + 8875, + 8750, + 8625, + 8500, + 8375, + 8250, + 8125, + 10000, /* 1.0000V */ + 10125, + 10250, + 10375, + 10500, + 10625, + 10750, + 10875, + 11000, + 0, /* reserved */ + }; + struct vdd_drive { + u8 vid; + unsigned voltage; + }; + + ret = select_i2c_ch_pca(I2C_MUX_CH_VOL_MONITOR); + if (ret) { + printf("VID: I2c failed to switch channel\n"); + ret = -1; + goto exit; + } + + /* get the voltage ID from fuse status register */ + fusesr = in_be32(&gur->dcfg_fusesr); + vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_VID_SHIFT) & + FSL_CORENET_DCFG_FUSESR_VID_MASK; + if (vid == FSL_CORENET_DCFG_FUSESR_VID_MASK) { + vid = (fusesr >> FSL_CORENET_DCFG_FUSESR_ALTVID_SHIFT) & + FSL_CORENET_DCFG_FUSESR_ALTVID_MASK; + } + vdd_target = vdd[vid]; + debug("VID:Reading from from fuse,vid=%x vdd is %dmV\n", + vid, vdd_target/10); + + /* check override variable for overriding VDD */ + vdd_string = getenv("b4qds_vdd_mv"); + if (vdd_override == 0 && vdd_string && + !strict_strtoul(vdd_string, 10, &vdd_string_override)) + vdd_override = vdd_string_override; + if (vdd_override >= 819 && vdd_override <= 1212) { + vdd_target = vdd_override * 10; /* convert to 1/10 mV */ + debug("VDD override is %lu\n", vdd_override); + } else if (vdd_override != 0) { + printf("Invalid value.\n"); + } + + if (vdd_target == 0) { + printf("VID: VID not used\n"); + ret = 0; + goto exit; + } + + /* + * Read voltage monitor to check real voltage. + * Voltage monitor LSB is 4mv. + */ + vdd_last = read_voltage(); + if (vdd_last < 0) { + printf("VID: abort VID adjustment\n"); + ret = -1; + goto exit; + } + + debug("VID: Core voltage is at %d mV\n", vdd_last); + ret = select_i2c_ch_pca(I2C_MUX_CH_DPM); + if (ret) { + printf("VID: I2c failed to switch channel to DPM\n"); + ret = -1; + goto exit; + } + + /* Round up to the value of step of Voltage regulator */ + voltage = roundup(vdd_target, ZM_STEP); + debug("VID: rounded up voltage = %d\n", voltage); + + /* lower the speed to 100kHz to access ZM7300 device */ + debug("VID: Setting bus speed to 100KHz if not already set\n"); + orig_i2c_speed = i2c_get_bus_speed(); + if (orig_i2c_speed != 100000) + i2c_set_bus_speed(100000); + + /* Read the existing level on board, if equal to requsted one, + no need to re-set */ + existing_voltage = zm_read_voltage(); + + /* allowing the voltage difference of one step 0.0125V acceptable */ + if ((existing_voltage >= voltage) && + (existing_voltage < (voltage + ZM_STEP))) { + debug("VID: voltage already set as requested,returning\n"); + ret = existing_voltage; + goto out; + } + debug("VID: Changing voltage for board from %dmV to %dmV\n", + existing_voltage/10, voltage/10); + + if (zm_disable_wp() < 0) { + ret = -1; + goto out; + } + /* Change Voltage: the change is done through all the steps in the + way, to avoid reset to the board due to power good signal fail + in big voltage change gap jump. + */ + if (existing_voltage > voltage) { + temp_voltage = existing_voltage - ZM_STEP; + while (temp_voltage >= voltage) { + ret = zm_write_voltage(temp_voltage); + if (ret == temp_voltage) { + temp_voltage -= ZM_STEP; + } else { + /* ZM7300 device failed to set + * the voltage */ + printf + ("VID:Stepping down vol failed:%dmV\n", + temp_voltage/10); + ret = -1; + goto out; + } + } + } else { + temp_voltage = existing_voltage + ZM_STEP; + while (temp_voltage < (voltage + ZM_STEP)) { + ret = zm_write_voltage(temp_voltage); + if (ret == temp_voltage) { + temp_voltage += ZM_STEP; + } else { + /* ZM7300 device failed to set + * the voltage */ + printf + ("VID:Stepping up vol failed:%dmV\n", + temp_voltage/10); + ret = -1; + goto out; + } + } + } + + if (zm_enable_wp() < 0) + ret = -1; + + /* restore the speed to 400kHz */ +out: debug("VID: Restore the I2C bus speed to %dKHz\n", + orig_i2c_speed/1000); + i2c_set_bus_speed(orig_i2c_speed); + if (ret < 0) + goto exit; + + ret = select_i2c_ch_pca(I2C_MUX_CH_VOL_MONITOR); + if (ret) { + printf("VID: I2c failed to switch channel\n"); + ret = -1; + goto exit; + } + vdd_last = read_voltage(); + select_i2c_ch_pca(I2C_CH_DEFAULT); + + if (vdd_last > 0) + printf("VID: Core voltage %d mV\n", vdd_last); + else + ret = -1; + +exit: + if (re_enable) + enable_interrupts(); + return ret; +} + int configure_vsc3316_3308(void) { ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); @@ -697,6 +930,13 @@ int board_early_init_r(void) #ifdef CONFIG_SYS_DPAA_QBMAN setup_portals(); #endif + /* + * Adjust core voltage according to voltage ID + * This function changes I2C mux to channel 2. + */ + if (adjust_vdd(0) < 0) + printf("Warning: Adjusting core voltage failed\n"); + /* SerDes1 refclks need to be set again, as default clks * are not suitable for CPRI and onboard SGMIIs to work * simultaneously. diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index f6a0879..22b57cc 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_P5020DS) += ics307_clk.o obj-$(CONFIG_P5040DS) += ics307_clk.o obj-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o obj-$(CONFIG_IDT8T49N222A) += idt8t49n222a_serdes_clk.o +obj-$(CONFIG_ZM7300) += zm7300.o # deal with common files for P-series corenet based devices obj-$(CONFIG_P2041RDB) += p_corenet/ diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index 9c18dd8..6144c53 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -21,7 +21,7 @@ /* some boards with non-256-bytes EEPROM have special define */ /* for MAX_NUM_PORTS in board-specific file */ #ifndef MAX_NUM_PORTS -#define MAX_NUM_PORTS 23 +#define MAX_NUM_PORTS 16 #endif #define NXID_VERSION 1 #endif @@ -58,8 +58,9 @@ static struct __attribute__ ((__packed__)) eeprom { u8 res_1[21]; /* 0x2b - 0x3f Reserved */ u8 mac_count; /* 0x40 Number of MAC addresses */ u8 mac_flag; /* 0x41 MAC table flags */ - u8 mac[MAX_NUM_PORTS][6]; /* 0x42 - x MAC addresses */ - u32 crc; /* x+1 CRC32 checksum */ + u8 mac[MAX_NUM_PORTS][6]; /* 0x42 - 0xa1 MAC addresses */ + u8 res_2[90]; /* 0xa2 - 0xfb Reserved */ + u32 crc; /* 0xfc - 0xff CRC32 checksum */ #endif } e; @@ -425,13 +426,13 @@ int mac_read_from_eeprom(void) if (read_eeprom()) { printf("Read failed.\n"); - return -1; + return 0; } if (!is_valid) { printf("Invalid ID (%02x %02x %02x %02x)\n", e.id[0], e.id[1], e.id[2], e.id[3]); - return -1; + return 0; } #ifdef CONFIG_SYS_I2C_EEPROM_NXID @@ -447,7 +448,7 @@ int mac_read_from_eeprom(void) crcp = (void *)&e + crc_offset; if (crc != be32_to_cpu(*crcp)) { printf("CRC mismatch (%08x != %08x)\n", crc, be32_to_cpu(e.crc)); - return -1; + return 0; } #ifdef CONFIG_SYS_I2C_EEPROM_NXID diff --git a/board/freescale/common/zm7300.c b/board/freescale/common/zm7300.c new file mode 100644 index 0000000..be5953a --- /dev/null +++ b/board/freescale/common/zm7300.c @@ -0,0 +1,235 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* Power-One ZM7300 DPM */ +#include "zm7300.h" + +#define DPM_WP 0x96 +#define WRP_OPCODE 0x01 +#define WRM_OPCODE 0x02 +#define RRP_OPCODE 0x11 + +#define DPM_SUCCESS 0x01 +#define DPM_EXEC_FAIL 0x00 + +static const uint16_t hex_to_1_10mv[] = { + 5000, + 5125, + 5250, + 5375, + 5500, + 5625, + 5750, + 5875, + 6000, + 6125, + 6250, + 6375, + 6500, + 6625, + 6750, + 6875, + 7000, + 7125, + 7250, + 7375, + 7500, + 7625, + 7750, + 7875, + 8000, + 8125, + 8250, + 8375, + 8500, + 8625, + 8750, + 8875, + 9000, + 9125, + 9250, + 9375, + 9500, /* 0.95mV */ + 9625, + 9750, + 9875, + 10000, /* 1.0V */ + 10125, + 10250, + 10375, + 10500, + 10625, + 10750, + 10875, + 11000, + 11125, + 11250, + 11375, + 11500, + 11625, + 11750, + 11875, + 12000, + 12125, + 12250, + 12375, + 0, /* reserved */ +}; + + +/* Read Data d from Register r of POL p */ +u8 dpm_rrp(uchar r) +{ + u8 ret[5]; + + ret[0] = RRP_OPCODE; + /* POL is 0 */ + ret[1] = 0; + ret[2] = r; + i2c_read(I2C_DPM_ADDR, 0, -3, ret, 2); + if (ret[1] == DPM_SUCCESS) { /* the DPM returned success as status */ + debug("RRP_OPCODE returned success data is %x\n", ret[0]); + return ret[0]; + } else { + return -1; + } +} + +/* Write Data d into DPM register r (RAM) */ +int dpm_wrm(u8 r, u8 d) +{ + u8 ret[5]; + + ret[0] = WRM_OPCODE; + ret[1] = r; + ret[2] = d; + i2c_read(I2C_DPM_ADDR, 0, -3, ret, 1); + if (ret[0] == DPM_SUCCESS) { /* the DPM returned success as status */ + debug("WRM_OPCODE returned success data is %x\n", ret[0]); + return ret[0]; + } else { + return -1; + } +} + +/* Write Data d into Register r of POL(s) a */ +int dpm_wrp(u8 r, u8 d) +{ + u8 ret[7]; + + ret[0] = WRP_OPCODE; + /* only POL0 is present */ + ret[1] = 0x01; + ret[2] = 0x00; + ret[3] = 0x00; + ret[4] = 0x00; + ret[5] = r; + ret[6] = d; + i2c_read(I2C_DPM_ADDR, 0, -7, ret, 1); + if (ret[0] == DPM_SUCCESS) { /* the DPM returned success as status */ + debug("WRP_OPCODE returned success data is %x\n", ret[0]); + return 0; + } else { + return -1; + } +} + +/* Uses the DPM command RRP */ +u8 zm_read(uchar reg) +{ + u8 d; + d = dpm_rrp(reg); + return d; +} + +/* ZM_write -- + Steps: + a. Write data to the register + b. Read data from register and compare to written value + c. Return return_code & voltage_read +*/ +u8 zm_write(u8 reg, u8 data) +{ + u8 d; + + /* write data to register */ + dpm_wrp(reg, data); + + /* read register and compare to written value */ + d = dpm_rrp(reg); + if (d != data) { + printf("zm_write : Comparison register data failed\n"); + return -1; + } + + return d; +} + +/* zm_write_out_voltage + * voltage in 1/10 mV + */ +int zm_write_voltage(int voltage) +{ + u8 reg = 0x7, vid; + uint16_t voltage_read; + u8 ret; + + vid = (voltage - 5000) / ZM_STEP; + + ret = zm_write(reg, vid); + if (ret != -1) { + voltage_read = hex_to_1_10mv[ret]; + debug("voltage set to %dmV\n", voltage_read/10); + return voltage_read; + } + return -1; +} + +/* zm_read_out_voltage + * voltage in 1/10 mV + */ +int zm_read_voltage(void) +{ + u8 reg = 0x7; + u8 ret; + int voltage; + + ret = zm_read(reg); + if (ret != -1) { + voltage = hex_to_1_10mv[ret]; + debug("Voltage read is %dmV\n", voltage/10); + return voltage; + } else { + return -1; + } +} + +int zm_disable_wp() +{ + u8 new_wp_value; + + /* Disable using Write-Protect register 0x96 */ + new_wp_value = 0x8; + if ((dpm_wrm(DPM_WP, new_wp_value)) < 0) { + printf("Disable Write-Protect register failed\n"); + return -1; + } + return 0; +} + +int zm_enable_wp() +{ + u8 orig_wp_value; + orig_wp_value = 0x0; + + /* Enable using Write-Protect register 0x96 */ + if ((dpm_wrm(DPM_WP, orig_wp_value)) < 0) { + printf("Enable Write-Protect register failed\n"); + return -1; + } + return 0; +} + diff --git a/board/freescale/common/zm7300.h b/board/freescale/common/zm7300.h new file mode 100644 index 0000000..6b4d035 --- /dev/null +++ b/board/freescale/common/zm7300.h @@ -0,0 +1,22 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ZM7300_H_ +#define __ZM7300_H 1_ + +#include <common.h> +#include <i2c.h> +#include <errno.h> +#include <asm/io.h> + +#define ZM_STEP 125 +int zm7300_set_voltage(int voltage_1_10mv); +int zm_write_voltage(int voltage); +int zm_read_voltage(void); +int zm_disable_wp(void); +int zm_enable_wp(void); + +#endif /* __ZM7300_H_ */ diff --git a/board/freescale/p1_p2_rdb/Makefile b/board/freescale/p1_p2_rdb/Makefile index f7b568a..a97bf45 100644 --- a/board/freescale/p1_p2_rdb/Makefile +++ b/board/freescale/p1_p2_rdb/Makefile @@ -4,8 +4,27 @@ # SPDX-License-Identifier: GPL-2.0+ # +MINIMAL= + +ifdef CONFIG_SPL_BUILD +ifdef CONFIG_SPL_INIT_MINIMAL +MINIMAL=y +endif +endif + +ifdef MINIMAL + +obj-y += spl_minimal.o tlb.o law.o + +else +ifdef CONFIG_SPL_BUILD +obj-y += spl.o +else obj-y += p1_p2_rdb.o +obj-$(CONFIG_PCI) += pci.o +endif obj-y += ddr.o obj-y += law.o -obj-$(CONFIG_PCI) += pci.o obj-y += tlb.o + +endif diff --git a/board/freescale/p1_p2_rdb/ddr.c b/board/freescale/p1_p2_rdb/ddr.c index 17d3bea..98ee5f1 100644 --- a/board/freescale/p1_p2_rdb/ddr.c +++ b/board/freescale/p1_p2_rdb/ddr.c @@ -180,27 +180,22 @@ fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = { phys_size_t fixed_sdram (void) { - char buf[32]; fsl_ddr_cfg_regs_t ddr_cfg_regs; size_t ddr_size; struct cpu_type *cpu; ulong ddr_freq, ddr_freq_mhz; cpu = gd->arch.cpu; - /* P1020 and it's derivatives support max 32bit DDR width */ - if (cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1011) { - ddr_size = (CONFIG_SYS_SDRAM_SIZE * 1024 * 1024 / 2); - } else { - ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - } + + ddr_size = CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; + #if defined(CONFIG_SYS_RAMBOOT) return ddr_size; #endif ddr_freq = get_ddr_freq(0); ddr_freq_mhz = ddr_freq / 1000000; - printf("Configuring DDR for %s MT/s data rate\n", - strmhz(buf, ddr_freq)); + printf("Configuring DDR for %ld T/s data rate\n", ddr_freq); if(ddr_freq_mhz <= 400) memcpy(&ddr_cfg_regs, &ddr_cfg_regs_400, sizeof(ddr_cfg_regs)); @@ -211,8 +206,7 @@ phys_size_t fixed_sdram (void) else if(ddr_freq_mhz <= 800) memcpy(&ddr_cfg_regs, &ddr_cfg_regs_800, sizeof(ddr_cfg_regs)); else - panic("Unsupported DDR data rate %s MT/s data rate\n", - strmhz(buf, ddr_freq)); + panic("Unsupported DDR data rate %ld T/s\n", ddr_freq); /* P1020 and it's derivatives support max 32bit DDR width */ if (cpu->soc_ver == SVR_P1020 || cpu->soc_ver == SVR_P1011) { diff --git a/board/freescale/p1_p2_rdb/spl.c b/board/freescale/p1_p2_rdb/spl.c new file mode 100644 index 0000000..f30c5fe --- /dev/null +++ b/board/freescale/p1_p2_rdb/spl.c @@ -0,0 +1,141 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <ns16550.h> +#include <malloc.h> +#include <mmc.h> +#include <nand.h> +#include <i2c.h> +#include <fsl_esdhc.h> +#include <spi_flash.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define SYSCLK_MASK 0x00200000 +#define BOARDREV_MASK 0x10100000 + +#define SYSCLK_66 66666666 +#define SYSCLK_100 100000000 + +unsigned long get_board_sys_clk(ulong dummy) +{ + ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); + u32 val_gpdat, sysclk_gpio; + + val_gpdat = in_be32(&pgpio->gpdat); + sysclk_gpio = val_gpdat & SYSCLK_MASK; + + if (sysclk_gpio == 0) + return SYSCLK_66; + else + return SYSCLK_100; + + return 0; +} + +phys_size_t get_effective_memsize(void) +{ + return CONFIG_SYS_L2_SIZE; +} + +void board_init_f(ulong bootflag) +{ + u32 plat_ratio, bus_clk; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + + console_init_f(); + + /* Set pmuxcr to allow both i2c1 and i2c2 */ + setbits_be32(&gur->pmuxcr, in_be32(&gur->pmuxcr) | 0x1000); + setbits_be32(&gur->pmuxcr, + in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA); + + /* Read back the register to synchronize the write. */ + in_be32(&gur->pmuxcr); + +#ifdef CONFIG_SPL_SPI_BOOT + clrbits_be32(&gur->pmuxcr, MPC85xx_PMUXCR_SD_DATA); +#endif + + /* initialize selected port with appropriate baud rate */ + plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; + plat_ratio >>= 1; + bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; + gd->bus_clk = bus_clk; + + NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, + bus_clk / 16 / CONFIG_BAUDRATE); +#ifdef CONFIG_SPL_MMC_BOOT + puts("\nSD boot...\n"); +#elif defined(CONFIG_SPL_SPI_BOOT) + puts("\nSPI Flash boot...\n"); +#endif + + /* copy code to RAM and jump to it - this should not return */ + /* NOTE - code has to be copied out of NAND buffer before + * other blocks can be read. + */ + relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); +} + +void board_init_r(gd_t *gd, ulong dest_addr) +{ + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *)CONFIG_SPL_GD_ADDR; + bd_t *bd; + + memset(gd, 0, sizeof(gd_t)); + bd = (bd_t *)(CONFIG_SPL_GD_ADDR + sizeof(gd_t)); + memset(bd, 0, sizeof(bd_t)); + gd->bd = bd; + bd->bi_memstart = CONFIG_SYS_INIT_L2_ADDR; + bd->bi_memsize = CONFIG_SYS_L2_SIZE; + + probecpu(); + get_clocks(); + mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR, + CONFIG_SPL_RELOC_MALLOC_SIZE); + +#ifdef CONFIG_SPL_MMC_BOOT + mmc_initialize(bd); +#endif + /* relocate environment function pointers etc. */ +#ifdef CONFIG_SPL_NAND_BOOT + nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_ENV_ADDR); +#endif +#ifdef CONFIG_SPL_NAND_BOOT + nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_ENV_ADDR); +#endif +#ifdef CONFIG_SPL_MMC_BOOT + mmc_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_ENV_ADDR); +#endif +#ifdef CONFIG_SPL_SPI_BOOT + spi_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE, + (uchar *)CONFIG_ENV_ADDR); +#endif + + gd->env_addr = (ulong)(CONFIG_ENV_ADDR); + gd->env_valid = 1; + + gd->ram_size = initdram(0); +#ifdef CONFIG_SPL_NAND_BOOT + puts("Tertiary program loader running in sram..."); +#else + puts("Second program loader running in sram...\n"); +#endif + +#ifdef CONFIG_SPL_MMC_BOOT + mmc_boot(); +#elif defined(CONFIG_SPL_SPI_BOOT) + spi_boot(); +#elif defined(CONFIG_SPL_NAND_BOOT) + nand_boot(); +#endif +} diff --git a/board/freescale/p1_p2_rdb/spl_minimal.c b/board/freescale/p1_p2_rdb/spl_minimal.c new file mode 100644 index 0000000..96a4d1c --- /dev/null +++ b/board/freescale/p1_p2_rdb/spl_minimal.c @@ -0,0 +1,84 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <ns16550.h> +#include <asm/io.h> +#include <nand.h> +#include <linux/compiler.h> +#include <asm/fsl_law.h> +#include <fsl_ddr_sdram.h> +#include <asm/global_data.h> + +DECLARE_GLOBAL_DATA_PTR; +#define SYSCLK_MASK 0x00200000 +#define BOARDREV_MASK 0x10100000 + +#define SYSCLK_66 66666666 +#define SYSCLK_100 100000000 + +unsigned long get_board_sys_clk(ulong dummy) +{ + ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); + u32 val_gpdat, sysclk_gpio; + + val_gpdat = in_be32(&pgpio->gpdat); + sysclk_gpio = val_gpdat & SYSCLK_MASK; + + if (sysclk_gpio == 0) + return SYSCLK_66; + else + return SYSCLK_100; + + return 0; +} + +void board_init_f(ulong bootflag) +{ + u32 plat_ratio; + ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; + +#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM) + set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM); + set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM); +#endif + + /* initialize selected port with appropriate baud rate */ + plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO; + plat_ratio >>= 1; + gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio; + + NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, + gd->bus_clk / 16 / CONFIG_BAUDRATE); + + puts("\nNAND boot... "); + + /* copy code to RAM and jump to it - this should not return */ + /* NOTE - code has to be copied out of NAND buffer before + * other blocks can be read. + */ + relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE); +} + +void board_init_r(gd_t *gd, ulong dest_addr) +{ + puts("\nSecond program loader running in sram..."); + nand_boot(); +} + +void putc(char c) +{ + if (c == '\n') + NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); + + NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); +} + +void puts(const char *str) +{ + while (*str) + putc(*str++); +} diff --git a/board/freescale/p1_p2_rdb/tlb.c b/board/freescale/p1_p2_rdb/tlb.c index bc98972..73f5729 100644 --- a/board/freescale/p1_p2_rdb/tlb.c +++ b/board/freescale/p1_p2_rdb/tlb.c @@ -37,6 +37,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 1, BOOKE_PAGESZ_1M, 1), +#ifndef CONFIG_SPL_BUILD /* W**G* - Flash/promjet, localbus */ /* This will be changed to *I*G* after relocation to RAM. */ SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, @@ -55,6 +56,7 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 4, BOOKE_PAGESZ_256K, 1), #endif /* #if defined(CONFIG_PCI) */ +#endif /* *I*G - NAND */ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, @@ -65,7 +67,21 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_1M, 1), -#if defined(CONFIG_SYS_RAMBOOT) +#ifdef CONFIG_SYS_INIT_L2_ADDR + /* *I*G - L2SRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, + 0, 11, BOOKE_PAGESZ_256K, 1), +#if CONFIG_SYS_L2_SIZE >= (256 << 10) + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, + CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 12, BOOKE_PAGESZ_256K, 1), +#endif +#endif + +#if defined(CONFIG_SYS_RAMBOOT) || \ + (defined(CONFIG_SPL) && !defined(CONFIG_SPL_COMMON_INIT_DDR)) SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE, MAS3_SX|MAS3_SW|MAS3_SR, 0, 0, 7, BOOKE_PAGESZ_1G, 1) diff --git a/board/freescale/qemu-ppce500/qemu-ppce500.c b/board/freescale/qemu-ppce500/qemu-ppce500.c index 3dbb0cf..230870d 100644 --- a/board/freescale/qemu-ppce500/qemu-ppce500.c +++ b/board/freescale/qemu-ppce500/qemu-ppce500.c @@ -346,3 +346,23 @@ ulong get_bus_freq (ulong dummy) get_sys_info(&sys_info); return sys_info.freq_systembus; } + +/* + * Return the number of cores on this SOC. + */ +int cpu_numcores(void) +{ + /* + * The QEMU u-boot target only needs to drive the first core, + * spinning and device tree nodes get driven by QEMU itself + */ + return 1; +} + +/* + * Return a 32-bit mask indicating which cores are present on this SOC. + */ +u32 cpu_mask(void) +{ + return (1 << cpu_numcores()) - 1; +} diff --git a/board/freescale/t104xrdb/t104xrdb.c b/board/freescale/t104xrdb/t104xrdb.c index fb5b849..a5e5fff 100644 --- a/board/freescale/t104xrdb/t104xrdb.c +++ b/board/freescale/t104xrdb/t104xrdb.c @@ -109,6 +109,8 @@ void ft_board_setup(void *blob, bd_t *bd) #ifdef CONFIG_DEEP_SLEEP void board_mem_sleep_setup(void) { + /* does not provide HW signals for power management */ + CPLD_WRITE(misc_ctl_status, (CPLD_READ(misc_ctl_status) & ~0x40)); /* Disable MCKE isolation */ gpio_set_value(2, 0); udelay(1); diff --git a/board/freescale/t4rdb/Makefile b/board/freescale/t4rdb/Makefile new file mode 100644 index 0000000..f7f7fc0 --- /dev/null +++ b/board/freescale/t4rdb/Makefile @@ -0,0 +1,12 @@ +# +# Copyright 2014 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_T4240RDB) += t4240rdb.o +obj-y += ddr.o +obj-y += eth.o +obj-$(CONFIG_PCI) += pci.o +obj-y += law.o +obj-y += tlb.o diff --git a/board/freescale/t4rdb/ddr.c b/board/freescale/t4rdb/ddr.c new file mode 100644 index 0000000..5a43c1b --- /dev/null +++ b/board/freescale/t4rdb/ddr.c @@ -0,0 +1,118 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <i2c.h> +#include <hwconfig.h> +#include <asm/mmu.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> +#include <asm/fsl_law.h> +#include "ddr.h" + +DECLARE_GLOBAL_DATA_PTR; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + ulong ddr_freq; + + if (ctrl_num > 2) { + printf("Not supported controller number %d\n", ctrl_num); + return; + } + if (!pdimm->n_ranks) + return; + + /* + * we use identical timing for all slots. If needed, change the code + * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num]; + */ + if (popts->registered_dimm_en) + pbsp = rdimms[0]; + else + pbsp = udimms[0]; + + + /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks && + (pdimm->rank_density >> 30) >= pbsp->rank_gb) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found for data\n" + "rate %lu MT/s\n" + "Trying to use the highest speed (%u) parameters\n", + ddr_freq, pbsp_highest->datarate_mhz_high); + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + } else { + panic("DIMM is not supported by this board"); + } +found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n" + "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x,\n" + "wrlvl_ctrl_3 0x%x\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, + pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, + pbsp->wrlvl_ctl_3); + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + + /* DHC_EN =1, ODT = 75 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +} + +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size; + + puts("Initializing....using SPD\n"); + + dram_size = fsl_ddr_sdram(); + + dram_size = setup_ddr_tlbs(dram_size / 0x100000); + dram_size *= 0x100000; + + puts(" DDR: "); + return dram_size; +} diff --git a/board/freescale/t4rdb/ddr.h b/board/freescale/t4rdb/ddr.h new file mode 100644 index 0000000..7b85476 --- /dev/null +++ b/board/freescale/t4rdb/ddr.h @@ -0,0 +1,78 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DDR_H__ +#define __DDR_H__ +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {2, 1350, 4, 4, 8, 0x0809090b, 0x0c0c0d0a}, + {2, 1350, 0, 5, 7, 0x0709090b, 0x0c0c0d09}, + {2, 1666, 4, 4, 8, 0x080a0a0d, 0x0d10100b}, + {2, 1666, 0, 5, 7, 0x080a0a0c, 0x0d0d0e0a}, + {2, 1900, 0, 4, 8, 0x090a0b0e, 0x0f11120c}, + {2, 2140, 0, 4, 8, 0x090a0b0e, 0x0f11120c}, + {1, 1350, 0, 5, 8, 0x0809090b, 0x0c0c0d0a}, + {1, 1700, 0, 5, 8, 0x080a0a0c, 0x0c0d0e0a}, + {1, 1900, 0, 4, 8, 0x080a0a0c, 0x0e0e0f0a}, + {1, 2140, 0, 4, 8, 0x090a0b0c, 0x0e0f100b}, + {} +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {4, 1350, 0, 5, 9, 0x08070605, 0x06070806}, + {4, 1666, 0, 5, 11, 0x0a080706, 0x07090906}, + {4, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07}, + {2, 1350, 0, 5, 9, 0x08070605, 0x06070806}, + {2, 1666, 0, 5, 11, 0x0a090806, 0x08090a06}, + {2, 2140, 0, 5, 12, 0x0b090807, 0x080a0b07}, + {1, 1350, 0, 5, 9, 0x08070605, 0x06070806}, + {1, 1666, 0, 5, 11, 0x0a090806, 0x08090a06}, + {1, 2140, 0, 4, 12, 0x0b090807, 0x080a0b07}, + {} +}; + +/* + * The three slots have slightly different timing. The center values are good + * for all slots. We use identical speed tables for them. In future use, if + * DIMMs require separated tables, make more entries as needed. + */ +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +/* + * The three slots have slightly different timing. See comments above. + */ +static const struct board_specific_parameters *rdimms[] = { + rdimm0, +}; + + +#endif diff --git a/board/freescale/t4rdb/eth.c b/board/freescale/t4rdb/eth.c new file mode 100644 index 0000000..d220475 --- /dev/null +++ b/board/freescale/t4rdb/eth.c @@ -0,0 +1,146 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * Chunhe Lan <Chunhe.Lan@freescale.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <netdev.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <fsl_ddr_sdram.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> +#include <malloc.h> +#include <fm_eth.h> +#include <fsl_mdio.h> +#include <miiphy.h> +#include <phy.h> +#include <asm/fsl_dtsec.h> +#include <asm/fsl_serdes.h> +#include <hwconfig.h> + +#include "../common/fman.h" +#include "t4rdb.h" + +void fdt_fixup_board_enet(void *fdt) +{ + return; +} + +int board_eth_init(bd_t *bis) +{ +#if defined(CONFIG_FMAN_ENET) + int i, interface; + struct memac_mdio_info dtsec_mdio_info; + struct memac_mdio_info tgec_mdio_info; + struct mii_dev *dev; + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_prtcl_s1, srds_prtcl_s2; + + srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS2_PRTCL; + srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT; + + dtsec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM2_DTSEC_MDIO_ADDR; + + dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; + + /* Register the 1G MDIO bus */ + fm_memac_mdio_init(bis, &dtsec_mdio_info); + + tgec_mdio_info.regs = + (struct memac_mdio_controller *)CONFIG_SYS_FM2_TGEC_MDIO_ADDR; + tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; + + /* Register the 10G MDIO bus */ + fm_memac_mdio_init(bis, &tgec_mdio_info); + + if (srds_prtcl_s1 == 28) { + /* SGMII */ + fm_info_set_phy_address(FM1_DTSEC1, SGMII_PHY_ADDR1); + fm_info_set_phy_address(FM1_DTSEC2, SGMII_PHY_ADDR2); + fm_info_set_phy_address(FM1_DTSEC3, SGMII_PHY_ADDR3); + fm_info_set_phy_address(FM1_DTSEC4, SGMII_PHY_ADDR4); + } else { + puts("Invalid SerDes1 protocol for T4240RDB\n"); + } + + for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { + interface = fm_info_get_enet_if(i); + switch (interface) { + case PHY_INTERFACE_MODE_SGMII: + dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); + fm_info_set_mdio(i, dev); + break; + default: + break; + } + } + + for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME); + fm_info_set_mdio(i, dev); + break; + default: + break; + } + } + +#if (CONFIG_SYS_NUM_FMAN == 2) + if (srds_prtcl_s2 == 56) { + /* SGMII && XFI */ + fm_info_set_phy_address(FM2_DTSEC1, SGMII_PHY_ADDR5); + fm_info_set_phy_address(FM2_DTSEC2, SGMII_PHY_ADDR6); + fm_info_set_phy_address(FM2_DTSEC3, SGMII_PHY_ADDR7); + fm_info_set_phy_address(FM2_DTSEC4, SGMII_PHY_ADDR8); + fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); + fm_info_set_phy_address(FM1_10GEC2, FM1_10GEC2_PHY_ADDR); + fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC2_PHY_ADDR); + fm_info_set_phy_address(FM2_10GEC2, FM2_10GEC1_PHY_ADDR); + } else { + puts("Invalid SerDes2 protocol for T4240RDB\n"); + } + + for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { + interface = fm_info_get_enet_if(i); + switch (interface) { + case PHY_INTERFACE_MODE_SGMII: + dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); + fm_info_set_mdio(i, dev); + break; + default: + break; + } + } + + for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) { + switch (fm_info_get_enet_if(i)) { + case PHY_INTERFACE_MODE_XGMII: + dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME); + fm_info_set_mdio(i, dev); + break; + default: + break; + } + } +#endif /* CONFIG_SYS_NUM_FMAN */ + + cpu_eth_init(bis); +#endif /* CONFIG_FMAN_ENET */ + + return pci_eth_init(bis); +} diff --git a/board/freescale/t4rdb/law.c b/board/freescale/t4rdb/law.c new file mode 100644 index 0000000..1f58768 --- /dev/null +++ b/board/freescale/t4rdb/law.c @@ -0,0 +1,28 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC), +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN), +#endif +#ifdef CONFIG_SYS_DCSRBAR_PHYS + /* Limit DCSR to 32M to access NPC Trace Buffer */ + SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_DCSR), +#endif +#ifdef CONFIG_SYS_NAND_BASE_PHYS + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_IFC), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/t4rdb/pci.c b/board/freescale/t4rdb/pci.c new file mode 100644 index 0000000..6387a20 --- /dev/null +++ b/board/freescale/t4rdb/pci.c @@ -0,0 +1,23 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <pci.h> +#include <asm/fsl_pci.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/fsl_serdes.h> + +void pci_init_board(void) +{ + fsl_pcie_init_board(0); +} + +void pci_of_setup(void *blob, bd_t *bd) +{ + FT_FSL_PCI_SETUP; +} diff --git a/board/freescale/t4rdb/t4240rdb.c b/board/freescale/t4rdb/t4240rdb.c new file mode 100644 index 0000000..5448c86 --- /dev/null +++ b/board/freescale/t4rdb/t4240rdb.c @@ -0,0 +1,125 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <command.h> +#include <i2c.h> +#include <netdev.h> +#include <linux/compiler.h> +#include <asm/mmu.h> +#include <asm/processor.h> +#include <asm/cache.h> +#include <asm/immap_85xx.h> +#include <asm/fsl_law.h> +#include <asm/fsl_serdes.h> +#include <asm/fsl_portals.h> +#include <asm/fsl_liodn.h> +#include <fm_eth.h> + +#include "t4rdb.h" + +DECLARE_GLOBAL_DATA_PTR; + +int checkboard(void) +{ + struct cpu_type *cpu = gd->arch.cpu; + + printf("Board: %sRDB, ", cpu->name); + + puts("SERDES Reference Clocks:\n"); + printf(" SERDES1=100MHz SERDES2=156.25MHz\n" + " SERDES3=100MHz SERDES4=100MHz\n"); + + return 0; +} + +int board_early_init_r(void) +{ + const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; + const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); + + /* + * Remap Boot flash + PROMJET region to caching-inhibited + * so that flash can be erased properly. + */ + + /* Flush d-cache and invalidate i-cache of any FLASH data */ + flush_dcache(); + invalidate_icache(); + + /* invalidate existing TLB entry for flash + promjet */ + disable_tlb(flash_esel); + + set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, flash_esel, BOOKE_PAGESZ_256M, 1); + + set_liodns(); +#ifdef CONFIG_SYS_DPAA_QBMAN + setup_portals(); +#endif + + return 0; +} + +int misc_init_r(void) +{ + return 0; +} + +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + ft_cpu_setup(blob, bd); + + base = getenv_bootm_low(); + size = getenv_bootm_size(); + + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_PCI + pci_of_setup(blob, bd); +#endif + + fdt_fixup_liodn(blob); + fdt_fixup_dr_usb(blob, bd); + +#ifdef CONFIG_SYS_DPAA_FMAN + fdt_fixup_fman_ethernet(blob); + fdt_fixup_board_enet(blob); +#endif +} + +/* + * This function is called by bdinfo to print detail board information. + * As an exmaple for future board, we organize the messages into + * several sections. If applicable, the message is in the format of + * <name> = <value> + * It should aligned with normal output of bdinfo command. + * + * Voltage: Core, DDR and another configurable voltages + * Clock : Critical clocks which are not printed already + * RCW : RCW source if not printed already + * Misc : Other important information not in above catagories + */ +void board_detail(void) +{ + int rcwsrc; + + /* RCW section SW3[4] */ + rcwsrc = 0x0; + puts("RCW source = "); + switch (rcwsrc & 0x1) { + case 0x1: + puts("SDHC/eMMC\n"); + break; + default: + puts("I2C normal addressing\n"); + break; + } +} diff --git a/board/freescale/t4rdb/t4_pbi.cfg b/board/freescale/t4rdb/t4_pbi.cfg new file mode 100644 index 0000000..c9f8ced --- /dev/null +++ b/board/freescale/t4rdb/t4_pbi.cfg @@ -0,0 +1,31 @@ +# +# Copyright 2014 Freescale Semiconductor, Inc. +# +# SPDX-License-Identifier: GPL-2.0+ +# + +#PBI commands +#Initialize CPC1 +09010000 00200400 +09138000 00000000 +091380c0 00000100 +#512KB SRAM +09010100 00000000 +09010104 fff80009 +09010f00 08000000 +#enable CPC1 +09010000 80000000 +#Configure LAW for CPC1 +09000d00 00000000 +09000d04 fff80000 +09000d08 81000012 +#slow mdio clock +095fc030 00008148 +095fd030 00808148 +#Configure alternate space +09000010 00000000 +09000014 ff000000 +09000018 81000000 +#Flush PBL data +09138000 00000000 +091380c0 00000000 diff --git a/board/freescale/t4rdb/t4_rcw.cfg b/board/freescale/t4rdb/t4_rcw.cfg new file mode 100644 index 0000000..13408bd --- /dev/null +++ b/board/freescale/t4rdb/t4_rcw.cfg @@ -0,0 +1,7 @@ +#PBL preamble and RCW header +aa55aa55 010e0100 +#serdes protocol 28_56_2_10 +16070019 18101916 00000000 00000000 +70701050 00448c00 6c020000 f5000000 +00000000 ee0000ee 00000000 000287fc +00000000 50000000 00000000 00000028 diff --git a/board/freescale/t4rdb/t4rdb.h b/board/freescale/t4rdb/t4rdb.h new file mode 100644 index 0000000..fb25d43 --- /dev/null +++ b/board/freescale/t4rdb/t4rdb.h @@ -0,0 +1,18 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __T4RDB_H__ +#define __T4RDB_H__ + +#undef CONFIG_SYS_NUM_FM1_DTSEC +#undef CONFIG_SYS_NUM_FM2_DTSEC +#define CONFIG_SYS_NUM_FM1_DTSEC 4 +#define CONFIG_SYS_NUM_FM2_DTSEC 4 + +void fdt_fixup_board_enet(void *blob); +void pci_of_setup(void *blob, bd_t *bd); + +#endif diff --git a/board/freescale/t4rdb/tlb.c b/board/freescale/t4rdb/tlb.c new file mode 100644 index 0000000..4b50bcd --- /dev/null +++ b/board/freescale/t4rdb/tlb.c @@ -0,0 +1,111 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/mmu.h> + +struct fsl_e_tlb_entry tlb_table[] = { + /* TLB 0 - for temp stack in cache */ + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, + CONFIG_SYS_INIT_RAM_ADDR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, + CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 0, BOOKE_PAGESZ_4K, 0), + + /* TLB 1 */ + /* *I*** - Covers boot page */ +#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR) + /* + * *I*G - L3SRAM. When L3 is used as 512K SRAM */ + SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_512K, 1), +#else + SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 0, BOOKE_PAGESZ_4K, 1), +#endif + + /* *I*G* - CCSRBAR */ + SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 1, BOOKE_PAGESZ_16M, 1), + + /* *I*G* - Flash, localbus */ + /* This will be changed to *I*G* after relocation to RAM. */ + SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, + MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 3, BOOKE_PAGESZ_1G, 1), + + /* *I*G* - PCI */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000, + CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), + + /* *I*G* - PCI I/O */ + SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 6, BOOKE_PAGESZ_256K, 1), + + /* Bman/Qman */ +#ifdef CONFIG_SYS_BMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 9, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 10, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_QMAN_MEM_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, 0, + 0, 11, BOOKE_PAGESZ_16M, 1), + SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000, + CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 12, BOOKE_PAGESZ_16M, 1), +#endif +#ifdef CONFIG_SYS_DCSRBAR_PHYS + SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 13, BOOKE_PAGESZ_32M, 1), +#endif +#ifdef CONFIG_SYS_NAND_BASE + /* + * *I*G - NAND + * entry 14 and 15 has been used hard coded, they will be disabled + * in cpu_init_f, so we use entry 16 for nand. + */ + SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, + MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, + 0, 16, BOOKE_PAGESZ_64K, 1), +#endif +}; + +int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/gen860t/fpga.c b/board/gen860t/fpga.c index b7984dd..dd0ef70 100644 --- a/board/gen860t/fpga.c +++ b/board/gen860t/fpga.c @@ -40,7 +40,7 @@ DECLARE_GLOBAL_DATA_PTR; /* Note that these are pointers to code that is in Flash. They will be * relocated at runtime. */ -Xilinx_Virtex2_Slave_SelectMap_fns fpga_fns = { +xilinx_virtex2_slave_selectmap_fns fpga_fns = { fpga_pre_config_fn, fpga_pgm_fn, fpga_init_fn, @@ -56,8 +56,8 @@ Xilinx_Virtex2_Slave_SelectMap_fns fpga_fns = { fpga_post_config_fn }; -Xilinx_desc fpga[CONFIG_FPGA_COUNT] = { - {Xilinx_Virtex2, +xilinx_desc fpga[CONFIG_FPGA_COUNT] = { + {xilinx_virtex2, slave_selectmap, XILINX_XC2V3000_SIZE, (void *) &fpga_fns, diff --git a/board/ip04/ip04.c b/board/ip04/ip04.c index c8ae512..ae52633 100644 --- a/board/ip04/ip04.c +++ b/board/ip04/ip04.c @@ -13,7 +13,6 @@ #include <common.h> #include <net.h> #include <netdev.h> -#include <asm/net.h> int checkboard(void) { @@ -33,7 +32,7 @@ int misc_init_r(void) uchar enetaddr[6]; if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(enetaddr); + eth_random_addr(enetaddr); eth_setenv_enetaddr("ethaddr", enetaddr); } diff --git a/board/keymile/kmp204x/kmp204x.c b/board/keymile/kmp204x/kmp204x.c index 95a19cd..6bc8eb8 100644 --- a/board/keymile/kmp204x/kmp204x.c +++ b/board/keymile/kmp204x/kmp204x.c @@ -79,7 +79,7 @@ int get_scl(void) #define ZL30158_RST 8 -#define ZL30343_RST 9 +#define BFTIC4_RST 0 int board_early_init_f(void) { @@ -88,13 +88,15 @@ int board_early_init_f(void) /* board only uses the DDR_MCK0, so disable the DDR_MCK1/2/3 */ setbits_be32(&gur->ddrclkdr, 0x001f000f); - /* take the Zarlinks out of reset as soon as possible */ - qrio_prst(ZL30158_RST, false, false); - qrio_prst(ZL30343_RST, false, false); + /* set the BFTIC's prstcfg to reset at power-up and unit reset only */ + qrio_prstcfg(BFTIC4_RST, PRSTCFG_POWUP_UNIT_RST); + /* and enable WD on it */ + qrio_wdmask(BFTIC4_RST, true); - /* and set their reset to power-up only */ - qrio_prstcfg(ZL30158_RST, PRSTCFG_POWUP_RST); - qrio_prstcfg(ZL30343_RST, PRSTCFG_POWUP_RST); + /* set the ZL30138's prstcfg to reset at power-up and unit reset only */ + qrio_prstcfg(ZL30158_RST, PRSTCFG_POWUP_UNIT_RST); + /* and take it out of reset as soon as possible (needed for Hooper) */ + qrio_prst(ZL30158_RST, false, false); return 0; } @@ -113,6 +115,12 @@ int board_early_init_r(void) if (ret) printf("error triggering PCIe FPGA config\n"); + /* enable the Unit LED (red) & Boot LED (on) */ + qrio_set_leds(); + + /* enable Application Buffer */ + qrio_enable_app_buffer(); + return ret; } @@ -121,16 +129,37 @@ unsigned long get_board_sys_clk(unsigned long dummy) return 66666666; } +#define ETH_FRONT_PHY_RST 15 +#define QSFP2_RST 11 +#define QSFP1_RST 10 +#define ZL30343_RST 9 + int misc_init_f(void) { /* configure QRIO pis for i2c deblocking */ i2c_deblock_gpio_cfg(); + /* configure the front phy's prstcfg and take it out of reset */ + qrio_prstcfg(ETH_FRONT_PHY_RST, PRSTCFG_POWUP_UNIT_CORE_RST); + qrio_prst(ETH_FRONT_PHY_RST, false, false); + + /* set the ZL30343 prstcfg to reset at power-up and unit reset only */ + qrio_prstcfg(ZL30343_RST, PRSTCFG_POWUP_UNIT_RST); + /* and enable the WD on it */ + qrio_wdmask(ZL30343_RST, true); + + /* set the QSFPs' prstcfg to reset at power-up and unit rst only */ + qrio_prstcfg(QSFP1_RST, PRSTCFG_POWUP_UNIT_RST); + qrio_prstcfg(QSFP2_RST, PRSTCFG_POWUP_UNIT_RST); + + /* and enable the WD on them */ + qrio_wdmask(QSFP1_RST, true); + qrio_wdmask(QSFP2_RST, true); + return 0; } #define NUM_SRDS_BANKS 2 -#define PHY_RST 15 int misc_init_r(void) { @@ -151,9 +180,6 @@ int misc_init_r(void) } } - /* take the mgmt eth phy out of reset */ - qrio_prst(PHY_RST, false, false); - return 0; } @@ -166,9 +192,23 @@ int hush_init_var(void) #endif #if defined(CONFIG_LAST_STAGE_INIT) + int last_stage_init(void) { +#if defined(CONFIG_KMCOGE4) + /* on KMCOGE4, the BFTIC4 is on the LBAPP2 */ + struct bfticu_iomap *bftic4 = + (struct bfticu_iomap *)CONFIG_SYS_LBAPP2_BASE; + u8 dip_switch = in_8((u8 *)&(bftic4->mswitch)) & BFTICU_DIPSWITCH_MASK; + + if (dip_switch != 0) { + /* start bootloader */ + puts("DIP: Enabled\n"); + setenv("actual_bank", "0"); + } +#endif set_km_env(); + return 0; } #endif @@ -232,3 +272,16 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_fman_mac_addresses(blob); #endif } + +#if defined(CONFIG_POST) + +/* DIC26_SELFTEST GPIO used to start factory test sw */ +#define SELFTEST_PORT GPIO_A +#define SELFTEST_PIN 31 + +int post_hotkeys_pressed(void) +{ + qrio_gpio_direction_input(SELFTEST_PORT, SELFTEST_PIN); + return qrio_get_gpio(SELFTEST_PORT, SELFTEST_PIN); +} +#endif diff --git a/board/keymile/kmp204x/kmp204x.h b/board/keymile/kmp204x/kmp204x.h index 0267596..afede99 100644 --- a/board/keymile/kmp204x/kmp204x.h +++ b/board/keymile/kmp204x/kmp204x.h @@ -20,6 +20,9 @@ void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr); #define PRSTCFG_POWUP_RST 0x3 void qrio_prst(u8 bit, bool en, bool wden); +void qrio_wdmask(u8 bit, bool wden); void qrio_prstcfg(u8 bit, u8 mode); +void qrio_set_leds(void); +void qrio_enable_app_buffer(void); void pci_of_setup(void *blob, bd_t *bd); diff --git a/board/keymile/kmp204x/pbi.cfg b/board/keymile/kmp204x/pbi.cfg index 9af8bd5..1e0a171 100644 --- a/board/keymile/kmp204x/pbi.cfg +++ b/board/keymile/kmp204x/pbi.cfg @@ -8,16 +8,47 @@ # #PBI commands -#Workaround for A-006559 needed for rev 2.0 of P2041 silicon -#Freescale's errarta sheet suggests it may be done with PBI +#Configure ALTCBAR for DCSR -> DCSR@89000000 +091380c0 000009C4 09000010 00000000 +091380c0 000009C4 09000014 00000000 +091380c0 000009C4 09000018 81d00000 -09021008 0000f000 -09021028 0000f000 -09021048 0000f000 -09021068 0000f000 +#Workaround for A-004849 +091380c0 000009C4 +890B0050 00000002 +091380c0 000009C4 +890B0054 00000002 +091380c0 000009C4 +890B0058 00000002 +091380c0 000009C4 +890B005C 00000002 +091380c0 000009C4 +890B0090 00000002 +091380c0 000009C4 +890B0094 00000002 +091380c0 000009C4 +890B0098 00000002 +091380c0 000009C4 +890B009C 00000002 +091380c0 000009C4 +890B0108 00000012 +091380c0 000009C4 +#Workaround for A-006559 needed for rev 2.0 of P2041 silicon +89021008 0000f000 +091380c0 000009C4 +89021028 0000f000 +091380c0 000009C4 +89021048 0000f000 +091380c0 000009C4 +89021068 0000f000 +091380c0 000009C4 +#Flush PBL data +09138000 00000000 +#Disable ALTCBAR 09000018 00000000 +091380c0 000009C4 #Initialize CPC1 as 1MB SRAM 09010000 00200400 09138000 00000000 diff --git a/board/keymile/kmp204x/pci.c b/board/keymile/kmp204x/pci.c index a484eb5..2b0b054 100644 --- a/board/keymile/kmp204x/pci.c +++ b/board/keymile/kmp204x/pci.c @@ -94,20 +94,23 @@ err_out: } #define PCIE_SW_RST 14 -#define PEXHC_SW_RST 13 -#define HOOPER_SW_RST 12 +#define PEXHC_RST 13 +#define HOOPER_RST 12 void pci_init_board(void) { - /* first wait for the PCIe FPGA to be configured + qrio_prstcfg(PCIE_SW_RST, PRSTCFG_POWUP_UNIT_CORE_RST); + qrio_prstcfg(PEXHC_RST, PRSTCFG_POWUP_UNIT_CORE_RST); + qrio_prstcfg(HOOPER_RST, PRSTCFG_POWUP_UNIT_CORE_RST); + + /* wait for the PCIe FPGA to be configured * it has been triggered earlier in board_early_init_r */ - int ret = wait_for_fpga_config(); - if (ret) + if (wait_for_fpga_config()) printf("error finishing PCIe FPGA config\n"); qrio_prst(PCIE_SW_RST, false, false); - qrio_prst(PEXHC_SW_RST, false, false); - qrio_prst(HOOPER_SW_RST, false, false); + qrio_prst(PEXHC_RST, false, false); + qrio_prst(HOOPER_RST, false, false); /* Hooper is not direcly PCIe capable */ mdelay(50); diff --git a/board/keymile/kmp204x/qrio.c b/board/keymile/kmp204x/qrio.c index 49f9aa2..b6ba93a 100644 --- a/board/keymile/kmp204x/qrio.c +++ b/board/keymile/kmp204x/qrio.c @@ -91,7 +91,7 @@ void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val) #define WDMASK_OFF 0x16 -static void qrio_wdmask(u8 bit, bool wden) +void qrio_wdmask(u8 bit, bool wden) { u16 wdmask; void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; @@ -144,3 +144,32 @@ void qrio_prstcfg(u8 bit, u8 mode) out_be32(qrio_base + PRSTCFG_OFF, prstcfg); } + +#define CTRLH_OFF 0x02 +#define CTRLH_WRL_BOOT 0x01 +#define CTRLH_WRL_UNITRUN 0x02 + +void qrio_set_leds(void) +{ + u8 ctrlh; + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + /* set UNIT LED to RED and BOOT LED to ON */ + ctrlh = in_8(qrio_base + CTRLH_OFF); + ctrlh |= (CTRLH_WRL_BOOT | CTRLH_WRL_UNITRUN); + out_8(qrio_base + CTRLH_OFF, ctrlh); +} + +#define CTRLL_OFF 0x03 +#define CTRLL_WRB_BUFENA 0x20 + +void qrio_enable_app_buffer(void) +{ + u8 ctrll; + void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE; + + /* enable application buffer */ + ctrll = in_8(qrio_base + CTRLL_OFF); + ctrll |= (CTRLL_WRB_BUFENA); + out_8(qrio_base + CTRLL_OFF, ctrll); +} diff --git a/board/keymile/kmp204x/rcw_kmp204x.cfg b/board/keymile/kmp204x/rcw_kmp204x.cfg index 2d4c48c..236d513 100644 --- a/board/keymile/kmp204x/rcw_kmp204x.cfg +++ b/board/keymile/kmp204x/rcw_kmp204x.cfg @@ -7,5 +7,5 @@ aa55aa55 010e0100 #64 bytes RCW data 14600000 00000000 28200000 00000000 148E70CF CFC02000 58000000 41000000 -00000000 00000000 00000000 F0428002 +00000000 00000000 00000000 F0428816 00000000 00000000 00000000 00000000 diff --git a/board/matrix_vision/mvsmr/fpga.c b/board/matrix_vision/mvsmr/fpga.c index 88035a9..5189925 100644 --- a/board/matrix_vision/mvsmr/fpga.c +++ b/board/matrix_vision/mvsmr/fpga.c @@ -16,7 +16,7 @@ #include "fpga.h" #include "mvsmr.h" -Xilinx_Spartan3_Slave_Serial_fns fpga_fns = { +xilinx_spartan3_slave_serial_fns fpga_fns = { fpga_pre_config_fn, fpga_pgm_fn, fpga_clk_fn, @@ -26,8 +26,8 @@ Xilinx_Spartan3_Slave_Serial_fns fpga_fns = { 0 }; -Xilinx_desc spartan3 = { - Xilinx_Spartan2, +xilinx_desc spartan3 = { + xilinx_spartan2, slave_serial, XILINX_XC3S200_SIZE, (void *) &fpga_fns, diff --git a/board/muas3001/muas3001.c b/board/muas3001/muas3001.c index 42b0a03..08eb5e8 100644 --- a/board/muas3001/muas3001.c +++ b/board/muas3001/muas3001.c @@ -286,6 +286,8 @@ int board_early_init_r (void) } #if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) +DECLARE_GLOBAL_DATA_PTR; + /* * update "memory" property in the blob */ @@ -314,7 +316,7 @@ void ft_blob_update (void *blob, bd_t *bd) /* baudrate */ nodeoffset = fdt_path_offset (blob, "/soc/cpm/serial"); if (nodeoffset >= 0) { - speed = cpu_to_be32 (bd->bi_baudrate); + speed = cpu_to_be32 (gd->baudrate); ret = fdt_setprop (blob, nodeoffset, "current-speed", &speed, sizeof (unsigned long)); if (ret < 0) diff --git a/board/mvblue/mvblue.c b/board/mvblue/mvblue.c index 69abb06..63503e8 100644 --- a/board/mvblue/mvblue.c +++ b/board/mvblue/mvblue.c @@ -58,7 +58,6 @@ int checkboard (void) u32 BoardType = get_BoardType (); char *BoardName[2] = { "mvBlueBOX", "mvBlueLYNX" }; char *p; - bd_t *bd = gd->bd; hw_watchdog_reset (); @@ -71,8 +70,8 @@ int checkboard (void) if ((p = getenv ("console_nr")) != NULL) { unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3; - bd->bi_baudrate &= ~3; - bd->bi_baudrate |= con_nr & 3; + gd->baudrate &= ~3; + gd->baudrate |= con_nr & 3; } return 0; } diff --git a/board/sandbox/sandbox/Makefile b/board/sandbox/Makefile index a0b9880..a0b9880 100644 --- a/board/sandbox/sandbox/Makefile +++ b/board/sandbox/Makefile diff --git a/board/sandbox/README.sandbox b/board/sandbox/README.sandbox new file mode 100644 index 0000000..529c447 --- /dev/null +++ b/board/sandbox/README.sandbox @@ -0,0 +1,299 @@ +/* + * Copyright (c) 2014 The Chromium OS Authors. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +Native Execution of U-Boot +========================== + +The 'sandbox' architecture is designed to allow U-Boot to run under Linux on +almost any hardware. To achieve this it builds U-Boot (so far as possible) +as a normal C application with a main() and normal C libraries. + +All of U-Boot's architecture-specific code therefore cannot be built as part +of the sandbox U-Boot. The purpose of running U-Boot under Linux is to test +all the generic code, not specific to any one architecture. The idea is to +create unit tests which we can run to test this upper level code. + +CONFIG_SANDBOX is defined when building a native board. + +The chosen vendor and board names are also 'sandbox', so there is a single +board in board/sandbox/sandbox. + +CONFIG_SANDBOX_BIG_ENDIAN should be defined when running on big-endian +machines. + +Note that standalone/API support is not available at present. + + +Basic Operation +--------------- + +To run sandbox U-Boot use something like: + + make sandbox_config all + ./u-boot + +Note: + If you get errors about 'sdl-config: Command not found' you may need to + install libsdl1.2-dev or similar to get SDL support. Alternatively you can + build sandbox without SDL (i.e. no display/keyboard support) by removing + the CONFIG_SANDBOX_SDL line in include/configs/sandbox.h or using: + + make sandbox_config all NO_SDL=1 + ./u-boot + + +U-Boot will start on your computer, showing a sandbox emulation of the serial +console: + + +U-Boot 2014.04 (Mar 20 2014 - 19:06:00) + +DRAM: 128 MiB +Using default environment + +In: serial +Out: lcd +Err: lcd +=> + +You can issue commands as your would normally. If the command you want is +not supported you can add it to include/configs/sandbox.h. + +To exit, type 'reset' or press Ctrl-C. + + +Console / LCD support +--------------------- + +Assuming that CONFIG_SANDBOX_SDL is defined when building, you can run the +sandbox with LCD and keyboard emulation, using something like: + + ./u-boot -d u-boot.dtb -l + +This will start U-Boot with a window showing the contents of the LCD. If +that window has the focus then you will be able to type commands as you +would on the console. You can adjust the display settings in the device +tree file - see arch/sandbox/dts/sandbox.dts. + + +Command-line Options +-------------------- + +Various options are available, mostly for test purposes. Use -h to see +available options. Some of these are described below. + +The terminal is normally in what is called 'raw-with-sigs' mode. This means +that you can use arrow keys for command editing and history, but if you +press Ctrl-C, U-Boot will exit instead of handling this as a keypress. + +Other options are 'raw' (so Ctrl-C is handled within U-Boot) and 'cooked' +(where the terminal is in cooked mode and cursor keys will not work, Ctrl-C +will exit). + +As mentioned above, -l causes the LCD emulation window to be shown. + +A device tree binary file can be provided with -d. If you edit the source +(it is stored at arch/sandbox/dts/sandbox.dts) you must rebuild U-Boot to +recreate the binary file. + +To execute commands directly, use the -c option. You can specify a single +command, or multiple commands separated by a semicolon, as is normal in +U-Boot. Be careful with quoting as the shall will normally process and +swallow quotes. When -c is used, U-Boot exists after the command is complete, +but you can force it to go to interactive mode instead with -i. + + +Memory Emulation +---------------- + +Memory emulation is supported, with the size set by CONFIG_SYS_SDRAM_SIZE. +The -m option can be used to read memory from a file on start-up and write +it when shutting down. This allows preserving of memory contents across +test runs. You can tell U-Boot to remove the memory file after it is read +(on start-up) with the --rm_memory option. + +To access U-Boot's emulated memory within the code, use map_sysmem(). This +function is used throughout U-Boot to ensure that emulated memory is used +rather than the U-Boot application memory. This provides memory starting +at 0 and extending to the size of the emulation. + + +Storing State +------------- + +With sandbox you can write drivers which emulate the operation of drivers on +real devices. Some of these drivers may want to record state which is +preserved across U-Boot runs. This is particularly useful for testing. For +example, the contents of a SPI flash chip should not disappear just because +U-Boot exits. + +State is stored in a device tree file in a simple format which is driver- +specific. You then use the -s option to specify the state file. Use -r to +make U-Boot read the state on start-up (otherwise it starts empty) and -w +to write it on exit (otherwise the stored state is left unchanged and any +changes U-Boot made will be lost). You can also use -n to tell U-Boot to +ignore any problems with missing state. This is useful when first running +since the state file will be empty. + +The device tree file has one node for each driver - the driver can store +whatever properties it likes in there. See 'Writing Sandbox Drivers' below +for more details on how to get drivers to read and write their state. + + +Running and Booting +------------------- + +Since there is no machine architecture, sandbox U-Boot cannot actually boot +a kernel, but it does support the bootm command. Filesystems, memory +commands, hashing, FIT images, verified boot and many other features are +supported. + +When 'bootm' runs a kernel, sandbox will exit, as U-Boot does on a real +machine. Of course in this case, no kernel is run. + +It is also possible to tell U-Boot that it has jumped from a temporary +previous U-Boot binary, with the -j option. That binary is automatically +removed by the U-Boot that gets the -j option. This allows you to write +tests which emulate the action of chain-loading U-Boot, typically used in +a situation where a second 'updatable' U-Boot is stored on your board. It +is very risky to overwrite or upgrade the only U-Boot on a board, since a +power or other failure will brick the board and require return to the +manufacturer in the case of a consumer device. + + +Supported Drivers +----------------- + +U-Boot sandbox supports these emulations: + +- Block devices +- Chrome OS EC +- GPIO +- Host filesystem (access files on the host from within U-Boot) +- Keyboard (Chrome OS) +- LCD +- Serial (for console only) +- Sound (incomplete - see sandbox_sdl_sound_init() for details) +- SPI +- SPI flash +- TPM (Trusted Platform Module) + +Notable omissions are networking and I2C. + +A wide range of commands is implemented. Filesystems which use a block +device are supported. + +Also sandbox uses generic board (CONFIG_SYS_GENERIC_BOARD) and supports +driver model (CONFIG_DM) and associated commands. + + +SPI Emulation +------------- + +Sandbox supports SPI and SPI flash emulation. + +This is controlled by the spi_sf argument, the format of which is: + + bus:cs:device:file + + bus - SPI bus number + cs - SPI chip select number + device - SPI device emulation name + file - File on disk containing the data + +For example: + + dd if=/dev/zero of=spi.bin bs=1M count=4 + ./u-boot --spi_sf 0:0:M25P16:spi.bin + +With this setup you can issue SPI flash commands as normal: + +=>sf probe +SF: Detected M25P16 with page size 64 KiB, total 2 MiB +=>sf read 0 0 10000 +SF: 65536 bytes @ 0x0 Read: OK +=> + +Since this is a full SPI emulation (rather than just flash), you can +also use low-level SPI commands: + +=>sspi 0:0 32 9f +FF202015 + +This is issuing a READ_ID command and getting back 20 (ST Micro) part +0x2015 (the M25P16). + +Drivers are connected to a particular bus/cs using sandbox's state +structure (see the 'spi' member). A set of operations must be provided +for each driver. + + +Configuration settings for the curious are: + +CONFIG_SANDBOX_SPI_MAX_BUS + The maximum number of SPI buses supported by the driver (default 1). + +CONFIG_SANDBOX_SPI_MAX_CS + The maximum number of chip selects supported by the driver + (default 10). + +CONFIG_SPI_IDLE_VAL + The idle value on the SPI bus + + +Writing Sandbox Drivers +----------------------- + +Generally you should put your driver in a file containing the word 'sandbox' +and put it in the same directory as other drivers of its type. You can then +implement the same hooks as the other drivers. + +To access U-Boot's emulated memory, use map_sysmem() as mentioned above. + +If your driver needs to store configuration or state (such as SPI flash +contents or emulated chip registers), you can use the device tree as +described above. Define handlers for this with the SANDBOX_STATE_IO macro. +See arch/sandbox/include/asm/state.h for documentation. In short you provide +a node name, compatible string and functions to read and write the state. +Since writing the state can expand the device tree, you may need to use +state_setprop() which does this automatically and avoids running out of +space. See existing code for examples. + + +Testing +------- + +U-Boot sandbox can be used to run various tests, mostly in the test/ +directory. These include: + + command_ut + - Unit tests for command parsing and handling + compression + - Unit tests for U-Boot's compression algorithms, useful for + security checking. It supports gzip, bzip2, lzma and lzo. + driver model + - test/dm/test-dm.sh to run these. + image + - Unit tests for images: + test/image/test-imagetools.sh - multi-file images + test/image/test-fit.py - FIT images + tracing + - test/trace/test-trace.sh tests the tracing system (see README.trace) + verified boot + - See test/vboot/vboot_test.sh for this + +If you change or enhance any of the above subsystems, you shold write or +expand a test and include it with your patch series submission. Test +coverage in U-Boot is limited, as we need to work to improve it. + +Note that many of these tests are implemented as commands which you can +run natively on your board if desired (and enabled). + +It would be useful to have a central script to run all of these. + +-- +Simon Glass <sjg@chromium.org> +Updated 22-Mar-14 diff --git a/board/sandbox/sandbox/sandbox.c b/board/sandbox/sandbox.c index e4d4e02..e4d4e02 100644 --- a/board/sandbox/sandbox/sandbox.c +++ b/board/sandbox/sandbox.c diff --git a/board/sandbox/sandbox/README.sandbox b/board/sandbox/sandbox/README.sandbox deleted file mode 100644 index 6989557..0000000 --- a/board/sandbox/sandbox/README.sandbox +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright (c) 2011 The Chromium OS Authors. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -Native Execution of U-Boot -========================== - -The 'sandbox' architecture is designed to allow U-Boot to run under Linux on -almost any hardware. To achieve this it builds U-Boot (so far as possible) -as a normal C application with a main() and normal C libraries. - -All of U-Boot's architecture-specific code therefore cannot be built as part -of the sandbox U-Boot. The purpose of running U-Boot under Linux is to test -all the generic code, not specific to any one architecture. The idea is to -create unit tests which we can run to test this upper level code. - -CONFIG_SANDBOX is defined when building a native board. - -The chosen vendor and board names are also 'sandbox', so there is a single -board in board/sandbox/sandbox. - -CONFIG_SANDBOX_BIG_ENDIAN should be defined when running on big-endian -machines. - -Note that standalone/API support is not available at present. - -The serial driver is a very simple implementation which reads and writes to -the console. It does not set the terminal into raw mode, so cursor keys and -history will not work yet. - - -SPI Emulation -------------- - -Sandbox supports SPI and SPI flash emulation. - -This is controlled by the spi_sf argument, the format of which is: - - bus:cs:device:file - - bus - SPI bus number - cs - SPI chip select number - device - SPI device emulation name - file - File on disk containing the data - -For example: - - dd if=/dev/zero of=spi.bin bs=1M count=4 - ./u-boot --spi_sf 0:0:M25P16:spi.bin - -With this setup you can issue SPI flash commands as normal: - -=>sf probe -SF: Detected M25P16 with page size 64 KiB, total 2 MiB -=>sf read 0 0 10000 -SF: 65536 bytes @ 0x0 Read: OK -=> - -Since this is a full SPI emulation (rather than just flash), you can -also use low-level SPI commands: - -=>sspi 0:0 32 9f -FF202015 - -This is issuing a READ_ID command and getting back 20 (ST Micro) part -0x2015 (the M25P16). - -Drivers are connected to a particular bus/cs using sandbox's state -structure (see the 'spi' member). A set of operations must be provided -for each driver. - - -Configuration settings for the curious are: - -CONFIG_SANDBOX_SPI_MAX_BUS - The maximum number of SPI buses supported by the driver (default 1). - -CONFIG_SANDBOX_SPI_MAX_CS - The maximum number of chip selects supported by the driver - (default 10). - -CONFIG_SPI_IDLE_VAL - The idle value on the SPI bus - - -Tests ------ - -So far we have no tests, but when we do these will be documented here. diff --git a/board/spear/x600/fpga.c b/board/spear/x600/fpga.c index c06c994..b256222 100644 --- a/board/spear/x600/fpga.c +++ b/board/spear/x600/fpga.c @@ -163,7 +163,7 @@ static int fpga_wr_fn(int assert_write, int flush, int cookie) return assert_write; } -static Xilinx_Spartan3_Slave_Serial_fns x600_fpga_fns = { +static xilinx_spartan3_slave_serial_fns x600_fpga_fns = { fpga_pre_config_fn, fpga_pgm_fn, fpga_clk_fn, @@ -173,7 +173,7 @@ static Xilinx_Spartan3_Slave_Serial_fns x600_fpga_fns = { fpga_post_config_fn, }; -static Xilinx_desc fpga[CONFIG_FPGA_COUNT] = { +static xilinx_desc fpga[CONFIG_FPGA_COUNT] = { XILINX_XC3S1200E_DESC(slave_serial, &x600_fpga_fns, 0) }; diff --git a/board/tcm-bf518/tcm-bf518.c b/board/tcm-bf518/tcm-bf518.c index 5964059..5d25fcd 100644 --- a/board/tcm-bf518/tcm-bf518.c +++ b/board/tcm-bf518/tcm-bf518.c @@ -11,7 +11,6 @@ #include <net.h> #include <netdev.h> #include <asm/blackfin.h> -#include <asm/net.h> #include <asm/mach-common/bits/otp.h> #include <asm/sdh.h> @@ -47,7 +46,7 @@ static void board_init_enetaddr(uchar *mac_addr) if (!valid_mac) { puts("Warning: Generating 'random' MAC address\n"); - bfin_gen_rand_mac(mac_addr); + eth_random_addr(mac_addr); } eth_setenv_enetaddr("ethaddr", mac_addr); diff --git a/board/tcm-bf537/tcm-bf537.c b/board/tcm-bf537/tcm-bf537.c index 38aaae6..a4f0f71 100644 --- a/board/tcm-bf537/tcm-bf537.c +++ b/board/tcm-bf537/tcm-bf537.c @@ -12,7 +12,6 @@ #include <net.h> #include <netdev.h> #include <asm/blackfin.h> -#include <asm/net.h> #include "../cm-bf537e/gpio_cfi_flash.h" DECLARE_GLOBAL_DATA_PTR; @@ -32,7 +31,7 @@ static void board_init_enetaddr(char *var) return; printf("Warning: %s: generating 'random' MAC address\n", var); - bfin_gen_rand_mac(enetaddr); + eth_random_addr(enetaddr); eth_setenv_enetaddr(var, enetaddr); } diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c index c32d554..b4a0a72 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.c +++ b/board/teejet/mt_ventoux/mt_ventoux.c @@ -190,7 +190,7 @@ int fpga_clk_fn(int assert_clk, int flush, int cookie) return assert_clk; } -Xilinx_Spartan3_Slave_Serial_fns mt_ventoux_fpga_fns = { +xilinx_spartan3_slave_serial_fns mt_ventoux_fpga_fns = { fpga_pre_config_fn, fpga_pgm_fn, fpga_clk_fn, @@ -200,7 +200,7 @@ Xilinx_Spartan3_Slave_Serial_fns mt_ventoux_fpga_fns = { fpga_post_config_fn, }; -Xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial, +xilinx_desc fpga = XILINX_XC6SLX4_DESC(slave_serial, (void *)&mt_ventoux_fpga_fns, 0); /* Initialize the FPGA */ diff --git a/board/xilinx/zynq/board.c b/board/xilinx/zynq/board.c index 485a5e4..c8cc2bc 100644 --- a/board/xilinx/zynq/board.c +++ b/board/xilinx/zynq/board.c @@ -14,15 +14,15 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_FPGA -Xilinx_desc fpga; +xilinx_desc fpga; /* It can be done differently */ -Xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10); -Xilinx_desc fpga015 = XILINX_XC7Z015_DESC(0x15); -Xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20); -Xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30); -Xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45); -Xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100); +xilinx_desc fpga010 = XILINX_XC7Z010_DESC(0x10); +xilinx_desc fpga015 = XILINX_XC7Z015_DESC(0x15); +xilinx_desc fpga020 = XILINX_XC7Z020_DESC(0x20); +xilinx_desc fpga030 = XILINX_XC7Z030_DESC(0x30); +xilinx_desc fpga045 = XILINX_XC7Z045_DESC(0x45); +xilinx_desc fpga100 = XILINX_XC7Z100_DESC(0x100); #endif int board_init(void) @@ -371,6 +371,7 @@ Active arm armv7 omap5 ti omap5_uevm Active arm armv7 rmobile atmark-techno armadillo-800eva armadillo-800eva - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Active arm armv7 rmobile kmc kzm9g kzm9g - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>:Tetsuyuki Kobayashi <koba@kmckk.co.jp> Active arm armv7 rmobile renesas koelsch koelsch - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> +Active arm armv7 rmobile renesas koelsch koelsch_nor koelsch:NORFLASH Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Active arm armv7 rmobile renesas lager lager - Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Active arm armv7 rmobile renesas lager lager_nor lager:NORFLASH Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> Active arm armv7 s5pc1xx samsung goni s5p_goni - Przemyslaw Marczak <p.marczak@samsung.com> @@ -815,8 +816,8 @@ Active powerpc mpc85xx - freescale mpc8568mds Active powerpc mpc85xx - freescale mpc8569mds MPC8569MDS - - Active powerpc mpc85xx - freescale mpc8569mds MPC8569MDS_ATM MPC8569MDS:ATM - Active powerpc mpc85xx - freescale mpc8569mds MPC8569MDS_NAND MPC8569MDS:NAND - -Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS - - -Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS_36BIT MPC8572DS:36BIT - +Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS - York Sun <yorksun@freescale.com> +Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS_36BIT MPC8572DS:36BIT York Sun <yorksun@freescale.com> Active powerpc mpc85xx - freescale mpc8572ds MPC8572DS_NAND MPC8572DS:NAND - Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_NAND P1010RDB:P1010RDB_PA,36BIT,NAND - Active powerpc mpc85xx - freescale p1010rdb P1010RDB-PA_36BIT_NAND_SECBOOT P1010RDB:P1010RDB_PA,36BIT,NAND_SECBOOT,SECURE_BOOT - @@ -972,6 +973,7 @@ Active powerpc mpc85xx - freescale t208xqds Active powerpc mpc85xx - freescale t208xrdb T2080RDB T208xRDB:PPC_T2080 - Active powerpc mpc85xx - freescale t208xrdb T2080RDB_NAND T208xRDB:PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,NAND - Active powerpc mpc85xx - freescale t208xrdb T2080RDB_SDCARD T208xRDB:PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SDCARD - +Active powerpc mpc85xx - freescale t208xrdb T2080RDB_SECURE_BOOT T208xRDB:PPC_T2080,SECURE_BOOT Aneesh Bansal <aneesh.bansal@freescale.com> Active powerpc mpc85xx - freescale t208xrdb T2080RDB_SPIFLASH T208xRDB:PPC_T2080,RAMBOOT_PBL,SPL_FSL_PBL,SPIFLASH - Active powerpc mpc85xx - freescale t208xrdb T2080RDB_SRIO_PCIE_BOOT T208xRDB:PPC_T2080,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale t4qds T4160QDS T4240QDS:PPC_T4160 - @@ -986,6 +988,8 @@ Active powerpc mpc85xx - freescale t4qds Active powerpc mpc85xx - freescale t4qds T4240QDS_SECURE_BOOT T4240QDS:PPC_T4240,SECURE_BOOT Aneesh Bansal <aneesh.bansal@freescale.com> Active powerpc mpc85xx - freescale t4qds T4240QDS_SPIFLASH T4240QDS:PPC_T4240,RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF40000 - Active powerpc mpc85xx - freescale t4qds T4240QDS_SRIO_PCIE_BOOT T4240QDS:PPC_T4240,SRIO_PCIE_BOOT_SLAVE,SYS_TEXT_BASE=0xFFF40000 - +Active powerpc mpc85xx - freescale t4rdb T4160RDB T4240RDB:PPC_T4160 Chunhe Lan <Chunhe.Lan@freescale.com> +Active powerpc mpc85xx - freescale t4rdb T4240RDB T4240RDB:PPC_T4240 Chunhe Lan <Chunhe.Lan@freescale.com> Active powerpc mpc85xx - gdsys p1022 controlcenterd_36BIT_SDCARD controlcenterd:36BIT,SDCARD Dirk Eibach <eibach@gdsys.de> Active powerpc mpc85xx - gdsys p1022 controlcenterd_36BIT_SDCARD_DEVELOP controlcenterd:36BIT,SDCARD,DEVELOP Dirk Eibach <eibach@gdsys.de> Active powerpc mpc85xx - gdsys p1022 controlcenterd_TRAILBLAZER controlcenterd:TRAILBLAZER,SPIFLASH Dirk Eibach <eibach@gdsys.de> @@ -1185,7 +1189,7 @@ Active powerpc ppc4xx - xilinx ppc405-generic Active powerpc ppc4xx - xilinx ppc405-generic xilinx-ppc405-generic_flash xilinx-ppc405-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC Ricardo Ribalda <ricardo.ribalda@uam.es> Active powerpc ppc4xx - xilinx ppc440-generic xilinx-ppc440-generic xilinx-ppc440-generic:SYS_TEXT_BASE=0x04000000,RESET_VECTOR_ADDRESS=0x04100000,BOOT_FROM_XMD=1 Ricardo Ribalda <ricardo.ribalda@uam.es> Active powerpc ppc4xx - xilinx ppc440-generic xilinx-ppc440-generic_flash xilinx-ppc440-generic:SYS_TEXT_BASE=0xF7F60000,RESET_VECTOR_ADDRESS=0xF7FFFFFC Ricardo Ribalda <ricardo.ribalda@uam.es> -Active sandbox sandbox - sandbox sandbox sandbox - Simon Glass <sjg@chromium.org> +Active sandbox sandbox - - sandbox sandbox - Simon Glass <sjg@chromium.org> Active sh sh2 - renesas rsk7203 rsk7203 - Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>:Nobuhiro Iwamatsu <iwamatsu@nigauri.org> Active sh sh2 - renesas rsk7264 rsk7264 - Phil Edworthy <phil.edworthy@renesas.com> Active sh sh2 - renesas rsk7269 rsk7269 - - diff --git a/common/board_f.c b/common/board_f.c index cbdf06f..4ea4cb2 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -194,7 +194,7 @@ static int init_func_ram(void) static int show_dram_config(void) { - ulong size; + unsigned long long size; #ifdef CONFIG_NR_DRAM_BANKS int i; @@ -708,14 +708,6 @@ static int init_post(void) } #endif -static int setup_baud_rate(void) -{ - /* Ick, can we get rid of this line? */ - gd->bd->bi_baudrate = gd->baudrate; - - return 0; -} - static int setup_dram_config(void) { /* Ram is board specific, so move it to board code ... */ @@ -954,7 +946,6 @@ static init_fnc_t init_sequence_f[] = { INIT_FUNC_WATCHDOG_RESET setup_board_part2, #endif - setup_baud_rate, display_new_sp, #ifdef CONFIG_SYS_EXTBDINFO setup_board_extra, @@ -970,20 +961,22 @@ static init_fnc_t init_sequence_f[] = { void board_init_f(ulong boot_flags) { -#ifndef CONFIG_X86 +#ifdef CONFIG_SYS_GENERIC_GLOBAL_DATA + /* + * For some archtectures, global data is initialized and used before + * calling this function. The data should be preserved. For others, + * CONFIG_SYS_GENERIC_GLOBAL_DATA should be defined and use the stack + * here to host global data until relocation. + */ gd_t data; gd = &data; -#endif /* * Clear global data before it is accessed at debug print * in initcall_run_list. Otherwise the debug print probably * get the wrong vaule of gd->have_console. */ -#if !defined(CONFIG_CPM2) && !defined(CONFIG_MPC512X) && \ - !defined(CONFIG_MPC83xx) && !defined(CONFIG_MPC85xx) && \ - !defined(CONFIG_MPC86xx) && !defined(CONFIG_X86) zero_global_data(); #endif diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 238cadb..f283a16 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -148,7 +148,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_mhz("ethspeed", bd->bi_ethspeed); #endif printf("IP addr = %s\n", getenv("ipaddr")); - printf("baudrate = %6u bps\n", bd->bi_baudrate); + printf("baudrate = %6u bps\n", gd->baudrate); print_num("relocaddr", gd->relocaddr); board_detail(); return 0; @@ -176,7 +176,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %u bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", gd->baudrate); return 0; } @@ -198,7 +198,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_CMD_NET) print_eths(); #endif - printf("baudrate = %u bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", gd->baudrate); return 0; } @@ -231,7 +231,7 @@ int do_bdinfo(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %6u bps\n", bd->bi_baudrate); + printf("baudrate = %6u bps\n", gd->baudrate); return 0; } @@ -277,7 +277,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %u bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", gd->baudrate); return 0; } @@ -304,7 +304,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); - printf("baudrate = %u bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", gd->baudrate); return 0; } @@ -324,7 +324,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); - printf("baudrate = %u bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", gd->baudrate); return 0; } @@ -344,7 +344,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); - printf("baudrate = %u bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", gd->baudrate); return 0; } @@ -368,7 +368,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_CMD_NET) print_eths(); #endif - printf("baudrate = %u bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", gd->baudrate); #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) print_num("TLB addr", gd->arch.tlb_addr); #endif @@ -406,7 +406,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %u bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", gd->baudrate); return 0; } @@ -440,7 +440,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("ip_addr = %s\n", getenv("ipaddr")); print_mhz("ethspeed", bd->bi_ethspeed); #endif - printf("baudrate = %u bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", gd->baudrate); return 0; } @@ -490,7 +490,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %u bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", gd->baudrate); return 0; } @@ -512,7 +512,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %u bps\n", bd->bi_baudrate); + printf("baudrate = %u bps\n", gd->baudrate); return 0; } @@ -530,7 +530,7 @@ int do_bdinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) print_eth(0); printf("ip_addr = %s\n", getenv("ipaddr")); #endif - printf("baudrate = %d bps\n", bd->bi_baudrate); + printf("baudrate = %d bps\n", gd->baudrate); return 0; } diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index c243a5b..e683af3 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -388,7 +388,7 @@ static int bootm_load_os(bootm_headers_t *images, unsigned long *load_end, image_buf = map_sysmem(image_start, image_len); switch (comp) { case IH_COMP_NONE: - if (load == blob_start || load == image_start) { + if (load == image_start) { printf(" XIP %s ... ", type_name); no_overlap = 1; } else { diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index c53601c..f4e306c 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -33,6 +33,7 @@ #include <watchdog.h> #include <linux/stddef.h> #include <asm/byteorder.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -846,7 +847,8 @@ static int do_env_export(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { char buf[32]; - char *addr, *cmd, *res; + ulong addr; + char *ptr, *cmd, *res; size_t size = 0; ssize_t len; env_t *envp; @@ -891,10 +893,11 @@ NXTARG: ; if (argc < 1) return CMD_RET_USAGE; - addr = (char *)simple_strtoul(argv[0], NULL, 16); + addr = simple_strtoul(argv[0], NULL, 16); + ptr = map_sysmem(addr, size); if (size) - memset(addr, '\0', size); + memset(ptr, '\0', size); argc--; argv++; @@ -902,7 +905,7 @@ NXTARG: ; if (sep) { /* export as text file */ len = hexport_r(&env_htab, sep, H_MATCH_KEY | H_MATCH_IDENT, - &addr, size, argc, argv); + &ptr, size, argc, argv); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); return 1; @@ -913,12 +916,12 @@ NXTARG: ; return 0; } - envp = (env_t *)addr; + envp = (env_t *)ptr; if (chk) /* export as checksum protected block */ res = (char *)envp->data; else /* export as raw binary data */ - res = addr; + res = ptr; len = hexport_r(&env_htab, '\0', H_MATCH_KEY | H_MATCH_IDENT, @@ -960,7 +963,8 @@ sep_err: static int do_env_import(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - char *cmd, *addr; + ulong addr; + char *cmd, *ptr; char sep = '\n'; int chk = 0; int fmt = 0; @@ -1004,7 +1008,8 @@ static int do_env_import(cmd_tbl_t *cmdtp, int flag, if (!fmt) printf("## Warning: defaulting to text format\n"); - addr = (char *)simple_strtoul(argv[0], NULL, 16); + addr = simple_strtoul(argv[0], NULL, 16); + ptr = map_sysmem(addr, 0); if (argc == 2) { size = simple_strtoul(argv[1], NULL, 16); @@ -1012,7 +1017,7 @@ static int do_env_import(cmd_tbl_t *cmdtp, int flag, puts("## Error: external checksum format must pass size\n"); return CMD_RET_FAILURE; } else { - char *s = addr; + char *s = ptr; size = 0; @@ -1032,7 +1037,7 @@ static int do_env_import(cmd_tbl_t *cmdtp, int flag, if (chk) { uint32_t crc; - env_t *ep = (env_t *)addr; + env_t *ep = (env_t *)ptr; size -= offsetof(env_t, data); memcpy(&crc, &ep->crc, sizeof(crc)); @@ -1041,11 +1046,11 @@ static int do_env_import(cmd_tbl_t *cmdtp, int flag, puts("## Error: bad CRC, import failed\n"); return 1; } - addr = (char *)ep->data; + ptr = (char *)ep->data; } - if (himport_r(&env_htab, addr, size, sep, del ? 0 : H_NOCLEAR, - 0, NULL) == 0) { + if (himport_r(&env_htab, ptr, size, sep, del ? 0 : H_NOCLEAR, 0, + NULL) == 0) { error("Environment import failed: errno = %d\n", errno); return 1; } diff --git a/common/cmd_time.c b/common/cmd_time.c index 5180cb4..de57e3b 100644 --- a/common/cmd_time.c +++ b/common/cmd_time.c @@ -21,8 +21,7 @@ static void report_time(ulong cycles) printf("\ntime:"); if (minutes) printf(" %lu minutes,", minutes); - printf(" %lu.%03lu seconds, %lu ticks\n", - seconds, milliseconds, cycles); + printf(" %lu.%03lu seconds\n", seconds, milliseconds); } static int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) diff --git a/common/hush.c b/common/hush.c index df10267..5b43224 100644 --- a/common/hush.c +++ b/common/hush.c @@ -996,7 +996,7 @@ static void get_user_input(struct in_str *i) i->p = the_command; #else int n; - static char the_command[CONFIG_SYS_CBSIZE]; + static char the_command[CONFIG_SYS_CBSIZE + 1]; #ifdef CONFIG_BOOT_RETRY_TIME # ifndef CONFIG_RESET_TO_RETRY diff --git a/common/main.c b/common/main.c index e54f63b..9bee7bd 100644 --- a/common/main.c +++ b/common/main.c @@ -1550,7 +1550,7 @@ int do_run (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) return 1; } - if (run_command(arg, flag) != 0) + if (run_command_list(arg, -1, flag) != 0) return 1; } return 0; diff --git a/disk/part_efi.c b/disk/part_efi.c index 216a292..c74b7b9 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -93,7 +93,15 @@ void print_part_efi(block_dev_desc_t * dev_desc) if (is_gpt_valid(dev_desc, GPT_PRIMARY_PARTITION_TABLE_LBA, gpt_head, &gpt_pte) != 1) { printf("%s: *** ERROR: Invalid GPT ***\n", __func__); - return; + if (is_gpt_valid(dev_desc, (dev_desc->lba - 1), + gpt_head, &gpt_pte) != 1) { + printf("%s: *** ERROR: Invalid Backup GPT ***\n", + __func__); + return; + } else { + printf("%s: *** Using Backup GPT ***\n", + __func__); + } } debug("%s: gpt-entry at %p\n", __func__, gpt_pte); @@ -142,7 +150,15 @@ int get_partition_info_efi(block_dev_desc_t * dev_desc, int part, if (is_gpt_valid(dev_desc, GPT_PRIMARY_PARTITION_TABLE_LBA, gpt_head, &gpt_pte) != 1) { printf("%s: *** ERROR: Invalid GPT ***\n", __func__); - return -1; + if (is_gpt_valid(dev_desc, (dev_desc->lba - 1), + gpt_head, &gpt_pte) != 1) { + printf("%s: *** ERROR: Invalid Backup GPT ***\n", + __func__); + return -1; + } else { + printf("%s: *** Using Backup GPT ***\n", + __func__); + } } if (part > le32_to_cpu(gpt_head->num_partition_entries) || @@ -252,7 +268,7 @@ int write_gpt_table(block_dev_desc_t *dev_desc, != pte_blk_cnt) goto err; - /* recalculate the values for the Second GPT Header */ + /* recalculate the values for the Backup GPT Header */ val = le64_to_cpu(gpt_h->my_lba); gpt_h->my_lba = gpt_h->alternate_lba; gpt_h->alternate_lba = cpu_to_le64(val); diff --git a/doc/README.generic-board b/doc/README.generic-board index 50d3a26..17da0b9 100644 --- a/doc/README.generic-board +++ b/doc/README.generic-board @@ -17,7 +17,7 @@ architecture-specific board.c file before October 2014. Background ---------- -U-Boot has tranditionally had a board.c file for each architecture. This has +U-Boot has traditionally had a board.c file for each architecture. This has introduced quite a lot of duplication, with each architecture tending to do initialisation slightly differently. To address this, a new 'generic board init' feature was introduced a year ago in March 2013 (further motivation is diff --git a/doc/README.gpt b/doc/README.gpt index f822894..ec0156d 100644 --- a/doc/README.gpt +++ b/doc/README.gpt @@ -66,14 +66,14 @@ GPT brief explanation: |Partition n | | | ---------------------------------------------------------- - LBA -34 |Entry 1|Entry 2| Entry 3| Entry 4| Secondary - -------------------------------------------------- (bkp) - LBA -33 |Entries 5 - 128 | GPT + LBA -34 |Entry 1|Entry 2| Entry 3| Entry 4| Backup + -------------------------------------------------- GPT + LBA -33 |Entries 5 - 128 | | | | | LBA -2 | | -------------------------------------------------- - LBA -1 |Secondary GPT Header | + LBA -1 |Backup GPT Header | ---------------------------------------------------------- For a legacy reasons, GPT's LBA 0 sector has a MBR structure. It is called @@ -86,7 +86,7 @@ It is possible to define 128 linearly placed partition entries. "LBA -1" means the last addressable block (in the mmc subsystem: "dev_desc->lba - 1") -Primary/Secondary GPT header: +Primary/Backup GPT header: ---------------------------- Offset Size Description @@ -115,7 +115,7 @@ IMPORTANT: GPT headers and partition entries are protected by CRC32 (the POSIX CRC32). -Primary GPT header and Secondary GPT header have swapped values of "Current LBA" +Primary GPT header and Backup GPT header have swapped values of "Current LBA" and "Backup LBA" and therefore different CRC32 check-sum. CRC32 for GPT headers (field "CRC of header") are calculated up till @@ -125,7 +125,7 @@ CRC32 for partition entries (field "CRC32 of partition array") is calculated for the whole array entry ( Number_of_partition_entries * sizeof(partition_entry_size (usually 128))) -Observe, how Secondary GPT is placed in the memory. It is NOT a mirror reflect +Observe, how Backup GPT is placed in the memory. It is NOT a mirror reflect of the Primary. Partition Entry Format: diff --git a/drivers/fpga/spartan2.c b/drivers/fpga/spartan2.c index 6eab1b5..7054056 100644 --- a/drivers/fpga/spartan2.c +++ b/drivers/fpga/spartan2.c @@ -31,29 +31,29 @@ #define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100 /* 10 ms */ #endif -static int Spartan2_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize); -static int Spartan2_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -/* static int Spartan2_sp_info(Xilinx_desc *desc ); */ +static int spartan2_sp_load(xilinx_desc *desc, const void *buf, size_t bsize); +static int spartan2_sp_dump(xilinx_desc *desc, const void *buf, size_t bsize); +/* static int spartan2_sp_info(xilinx_desc *desc ); */ -static int Spartan2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize); -static int Spartan2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -/* static int Spartan2_ss_info(Xilinx_desc *desc ); */ +static int spartan2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize); +static int spartan2_ss_dump(xilinx_desc *desc, const void *buf, size_t bsize); +/* static int spartan2_ss_info(xilinx_desc *desc ); */ /* ------------------------------------------------------------------------- */ /* Spartan-II Generic Implementation */ -int Spartan2_load(Xilinx_desc *desc, const void *buf, size_t bsize) +static int spartan2_load(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; switch (desc->iface) { case slave_serial: PRINTF ("%s: Launching Slave Serial Load\n", __FUNCTION__); - ret_val = Spartan2_ss_load (desc, buf, bsize); + ret_val = spartan2_ss_load(desc, buf, bsize); break; case slave_parallel: PRINTF ("%s: Launching Slave Parallel Load\n", __FUNCTION__); - ret_val = Spartan2_sp_load (desc, buf, bsize); + ret_val = spartan2_sp_load(desc, buf, bsize); break; default: @@ -64,19 +64,19 @@ int Spartan2_load(Xilinx_desc *desc, const void *buf, size_t bsize) return ret_val; } -int Spartan2_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +static int spartan2_dump(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; switch (desc->iface) { case slave_serial: PRINTF ("%s: Launching Slave Serial Dump\n", __FUNCTION__); - ret_val = Spartan2_ss_dump (desc, buf, bsize); + ret_val = spartan2_ss_dump(desc, buf, bsize); break; case slave_parallel: PRINTF ("%s: Launching Slave Parallel Dump\n", __FUNCTION__); - ret_val = Spartan2_sp_dump (desc, buf, bsize); + ret_val = spartan2_sp_dump(desc, buf, bsize); break; default: @@ -87,7 +87,7 @@ int Spartan2_dump(Xilinx_desc *desc, const void *buf, size_t bsize) return ret_val; } -int Spartan2_info( Xilinx_desc *desc ) +static int spartan2_info(xilinx_desc *desc) { return FPGA_SUCCESS; } @@ -96,10 +96,10 @@ int Spartan2_info( Xilinx_desc *desc ) /* ------------------------------------------------------------------------- */ /* Spartan-II Slave Parallel Generic Implementation */ -static int Spartan2_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) +static int spartan2_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; /* assume the worst */ - Xilinx_Spartan2_Slave_Parallel_fns *fn = desc->iface_fns; + xilinx_spartan2_slave_parallel_fns *fn = desc->iface_fns; PRINTF ("%s: start with interface functions @ 0x%p\n", __FUNCTION__, fn); @@ -248,10 +248,10 @@ static int Spartan2_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) return ret_val; } -static int Spartan2_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +static int spartan2_sp_dump(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; /* assume the worst */ - Xilinx_Spartan2_Slave_Parallel_fns *fn = desc->iface_fns; + xilinx_spartan2_slave_parallel_fns *fn = desc->iface_fns; if (fn) { unsigned char *data = (unsigned char *) buf; @@ -296,10 +296,10 @@ static int Spartan2_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize) /* ------------------------------------------------------------------------- */ -static int Spartan2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) +static int spartan2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; /* assume the worst */ - Xilinx_Spartan2_Slave_Serial_fns *fn = desc->iface_fns; + xilinx_spartan2_slave_serial_fns *fn = desc->iface_fns; int i; unsigned char val; @@ -439,7 +439,7 @@ static int Spartan2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) return ret_val; } -static int Spartan2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +static int spartan2_ss_dump(xilinx_desc *desc, const void *buf, size_t bsize) { /* Readback is only available through the Slave Parallel and */ /* boundary-scan interfaces. */ @@ -447,3 +447,9 @@ static int Spartan2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize) __FUNCTION__); return FPGA_FAIL; } + +struct xilinx_fpga_op spartan2_op = { + .load = spartan2_load, + .dump = spartan2_dump, + .info = spartan2_info, +}; diff --git a/drivers/fpga/spartan3.c b/drivers/fpga/spartan3.c index 3edc5c2..5c9412c 100644 --- a/drivers/fpga/spartan3.c +++ b/drivers/fpga/spartan3.c @@ -35,29 +35,29 @@ #define CONFIG_SYS_FPGA_WAIT CONFIG_SYS_HZ/100 /* 10 ms */ #endif -static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize); -static int Spartan3_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -/* static int Spartan3_sp_info(Xilinx_desc *desc ); */ +static int spartan3_sp_load(xilinx_desc *desc, const void *buf, size_t bsize); +static int spartan3_sp_dump(xilinx_desc *desc, const void *buf, size_t bsize); +/* static int spartan3_sp_info(xilinx_desc *desc ); */ -static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize); -static int Spartan3_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -/* static int Spartan3_ss_info(Xilinx_desc *desc); */ +static int spartan3_ss_load(xilinx_desc *desc, const void *buf, size_t bsize); +static int spartan3_ss_dump(xilinx_desc *desc, const void *buf, size_t bsize); +/* static int spartan3_ss_info(xilinx_desc *desc); */ /* ------------------------------------------------------------------------- */ /* Spartan-II Generic Implementation */ -int Spartan3_load(Xilinx_desc *desc, const void *buf, size_t bsize) +static int spartan3_load(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; switch (desc->iface) { case slave_serial: PRINTF ("%s: Launching Slave Serial Load\n", __FUNCTION__); - ret_val = Spartan3_ss_load (desc, buf, bsize); + ret_val = spartan3_ss_load(desc, buf, bsize); break; case slave_parallel: PRINTF ("%s: Launching Slave Parallel Load\n", __FUNCTION__); - ret_val = Spartan3_sp_load (desc, buf, bsize); + ret_val = spartan3_sp_load(desc, buf, bsize); break; default: @@ -68,19 +68,19 @@ int Spartan3_load(Xilinx_desc *desc, const void *buf, size_t bsize) return ret_val; } -int Spartan3_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +static int spartan3_dump(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; switch (desc->iface) { case slave_serial: PRINTF ("%s: Launching Slave Serial Dump\n", __FUNCTION__); - ret_val = Spartan3_ss_dump (desc, buf, bsize); + ret_val = spartan3_ss_dump(desc, buf, bsize); break; case slave_parallel: PRINTF ("%s: Launching Slave Parallel Dump\n", __FUNCTION__); - ret_val = Spartan3_sp_dump (desc, buf, bsize); + ret_val = spartan3_sp_dump(desc, buf, bsize); break; default: @@ -91,7 +91,7 @@ int Spartan3_dump(Xilinx_desc *desc, const void *buf, size_t bsize) return ret_val; } -int Spartan3_info( Xilinx_desc *desc ) +static int spartan3_info(xilinx_desc *desc) { return FPGA_SUCCESS; } @@ -100,10 +100,10 @@ int Spartan3_info( Xilinx_desc *desc ) /* ------------------------------------------------------------------------- */ /* Spartan-II Slave Parallel Generic Implementation */ -static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) +static int spartan3_sp_load(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; /* assume the worst */ - Xilinx_Spartan3_Slave_Parallel_fns *fn = desc->iface_fns; + xilinx_spartan3_slave_parallel_fns *fn = desc->iface_fns; PRINTF ("%s: start with interface functions @ 0x%p\n", __FUNCTION__, fn); @@ -254,10 +254,10 @@ static int Spartan3_sp_load(Xilinx_desc *desc, const void *buf, size_t bsize) return ret_val; } -static int Spartan3_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +static int spartan3_sp_dump(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; /* assume the worst */ - Xilinx_Spartan3_Slave_Parallel_fns *fn = desc->iface_fns; + xilinx_spartan3_slave_parallel_fns *fn = desc->iface_fns; if (fn) { unsigned char *data = (unsigned char *) buf; @@ -302,10 +302,10 @@ static int Spartan3_sp_dump(Xilinx_desc *desc, const void *buf, size_t bsize) /* ------------------------------------------------------------------------- */ -static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) +static int spartan3_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; /* assume the worst */ - Xilinx_Spartan3_Slave_Serial_fns *fn = desc->iface_fns; + xilinx_spartan3_slave_serial_fns *fn = desc->iface_fns; int i; unsigned char val; @@ -457,7 +457,7 @@ static int Spartan3_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) return ret_val; } -static int Spartan3_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +static int spartan3_ss_dump(xilinx_desc *desc, const void *buf, size_t bsize) { /* Readback is only available through the Slave Parallel and */ /* boundary-scan interfaces. */ @@ -465,3 +465,9 @@ static int Spartan3_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize) __FUNCTION__); return FPGA_FAIL; } + +struct xilinx_fpga_op spartan3_op = { + .load = spartan3_load, + .dump = spartan3_dump, + .info = spartan3_info, +}; diff --git a/drivers/fpga/virtex2.c b/drivers/fpga/virtex2.c index b5a895d..e092147 100644 --- a/drivers/fpga/virtex2.c +++ b/drivers/fpga/virtex2.c @@ -84,25 +84,25 @@ #define CONFIG_SYS_FPGA_WAIT_CONFIG CONFIG_SYS_HZ/5 /* 200 ms */ #endif -static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize); -static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize); +static int virtex2_ssm_load(xilinx_desc *desc, const void *buf, size_t bsize); +static int virtex2_ssm_dump(xilinx_desc *desc, const void *buf, size_t bsize); -static int Virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize); -static int Virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize); +static int virtex2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize); +static int virtex2_ss_dump(xilinx_desc *desc, const void *buf, size_t bsize); -int Virtex2_load(Xilinx_desc *desc, const void *buf, size_t bsize) +static int virtex2_load(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; switch (desc->iface) { case slave_serial: PRINTF ("%s: Launching Slave Serial Load\n", __FUNCTION__); - ret_val = Virtex2_ss_load (desc, buf, bsize); + ret_val = virtex2_ss_load(desc, buf, bsize); break; case slave_selectmap: PRINTF ("%s: Launching Slave Parallel Load\n", __FUNCTION__); - ret_val = Virtex2_ssm_load (desc, buf, bsize); + ret_val = virtex2_ssm_load(desc, buf, bsize); break; default: @@ -112,19 +112,19 @@ int Virtex2_load(Xilinx_desc *desc, const void *buf, size_t bsize) return ret_val; } -int Virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +static int virtex2_dump(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; switch (desc->iface) { case slave_serial: PRINTF ("%s: Launching Slave Serial Dump\n", __FUNCTION__); - ret_val = Virtex2_ss_dump (desc, buf, bsize); + ret_val = virtex2_ss_dump(desc, buf, bsize); break; case slave_parallel: PRINTF ("%s: Launching Slave Parallel Dump\n", __FUNCTION__); - ret_val = Virtex2_ssm_dump (desc, buf, bsize); + ret_val = virtex2_ssm_dump(desc, buf, bsize); break; default: @@ -134,7 +134,7 @@ int Virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize) return ret_val; } -int Virtex2_info (Xilinx_desc * desc) +static int virtex2_info(xilinx_desc *desc) { return FPGA_SUCCESS; } @@ -153,10 +153,10 @@ int Virtex2_info (Xilinx_desc * desc) * INIT_B and DONE lines. If both are high, configuration has * succeeded. Congratulations! */ -static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize) +static int virtex2_ssm_load(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; - Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns; + xilinx_virtex2_slave_selectmap_fns *fn = desc->iface_fns; PRINTF ("%s:%d: Start with interface functions @ 0x%p\n", __FUNCTION__, __LINE__, fn); @@ -352,10 +352,10 @@ static int Virtex2_ssm_load(Xilinx_desc *desc, const void *buf, size_t bsize) /* * Read the FPGA configuration data */ -static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +static int virtex2_ssm_dump(xilinx_desc *desc, const void *buf, size_t bsize) { int ret_val = FPGA_FAIL; - Xilinx_Virtex2_Slave_SelectMap_fns *fn = desc->iface_fns; + xilinx_virtex2_slave_selectmap_fns *fn = desc->iface_fns; if (fn) { unsigned char *data = (unsigned char *) buf; @@ -404,16 +404,22 @@ static int Virtex2_ssm_dump(Xilinx_desc *desc, const void *buf, size_t bsize) return ret_val; } -static int Virtex2_ss_load(Xilinx_desc *desc, const void *buf, size_t bsize) +static int virtex2_ss_load(xilinx_desc *desc, const void *buf, size_t bsize) { printf ("%s: Slave Serial Loading is unsupported\n", __FUNCTION__); return FPGA_FAIL; } -static int Virtex2_ss_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +static int virtex2_ss_dump(xilinx_desc *desc, const void *buf, size_t bsize) { printf ("%s: Slave Serial Dumping is unsupported\n", __FUNCTION__); return FPGA_FAIL; } /* vim: set ts=4 tw=78: */ + +struct xilinx_fpga_op virtex2_op = { + .load = virtex2_load, + .dump = virtex2_dump, + .info = virtex2_info, +}; diff --git a/drivers/fpga/xilinx.c b/drivers/fpga/xilinx.c index 2e0db53..8837f5c 100644 --- a/drivers/fpga/xilinx.c +++ b/drivers/fpga/xilinx.c @@ -19,19 +19,8 @@ #include <spartan3.h> #include <zynqpl.h> -#if 0 -#define FPGA_DEBUG -#endif - -/* Define FPGA_DEBUG to get debug printf's */ -#ifdef FPGA_DEBUG -#define PRINTF(fmt,args...) printf (fmt ,##args) -#else -#define PRINTF(fmt,args...) -#endif - /* Local Static Functions */ -static int xilinx_validate (Xilinx_desc * desc, char *fn); +static int xilinx_validate(xilinx_desc *desc, char *fn); /* ------------------------------------------------------------------------- */ @@ -43,7 +32,7 @@ int fpga_loadbitstream(int devnum, char *fpgadata, size_t size) unsigned char *dataptr; unsigned int i; const fpga_desc *desc; - Xilinx_desc *xdesc; + xilinx_desc *xdesc; dataptr = (unsigned char *)fpgadata; /* Find out fpga_description */ @@ -94,7 +83,7 @@ int fpga_loadbitstream(int devnum, char *fpgadata, size_t size) return FPGA_FAIL; } } else { - printf("%s: Please fill correct device ID to Xilinx_desc\n", + printf("%s: Please fill correct device ID to xilinx_desc\n", __func__); } printf(" part number = \"%s\"\n", buffer); @@ -141,134 +130,40 @@ int fpga_loadbitstream(int devnum, char *fpgadata, size_t size) return fpga_load(devnum, dataptr, swapsize); } -int xilinx_load(Xilinx_desc *desc, const void *buf, size_t bsize) +int xilinx_load(xilinx_desc *desc, const void *buf, size_t bsize) { - int ret_val = FPGA_FAIL; /* assume a failure */ - if (!xilinx_validate (desc, (char *)__FUNCTION__)) { printf ("%s: Invalid device descriptor\n", __FUNCTION__); - } else - switch (desc->family) { - case Xilinx_Spartan2: -#if defined(CONFIG_FPGA_SPARTAN2) - PRINTF ("%s: Launching the Spartan-II Loader...\n", - __FUNCTION__); - ret_val = Spartan2_load (desc, buf, bsize); -#else - printf ("%s: No support for Spartan-II devices.\n", - __FUNCTION__); -#endif - break; - case Xilinx_Spartan3: -#if defined(CONFIG_FPGA_SPARTAN3) - PRINTF ("%s: Launching the Spartan-III Loader...\n", - __FUNCTION__); - ret_val = Spartan3_load (desc, buf, bsize); -#else - printf ("%s: No support for Spartan-III devices.\n", - __FUNCTION__); -#endif - break; - case Xilinx_Virtex2: -#if defined(CONFIG_FPGA_VIRTEX2) - PRINTF ("%s: Launching the Virtex-II Loader...\n", - __FUNCTION__); - ret_val = Virtex2_load (desc, buf, bsize); -#else - printf ("%s: No support for Virtex-II devices.\n", - __FUNCTION__); -#endif - break; - case xilinx_zynq: -#if defined(CONFIG_FPGA_ZYNQPL) - PRINTF("%s: Launching the Zynq PL Loader...\n", - __func__); - ret_val = zynq_load(desc, buf, bsize); -#else - printf("%s: No support for Zynq devices.\n", - __func__); -#endif - break; - - default: - printf ("%s: Unsupported family type, %d\n", - __FUNCTION__, desc->family); - } + return FPGA_FAIL; + } - return ret_val; + return desc->operations->load(desc, buf, bsize); } -int xilinx_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +int xilinx_dump(xilinx_desc *desc, const void *buf, size_t bsize) { - int ret_val = FPGA_FAIL; /* assume a failure */ - if (!xilinx_validate (desc, (char *)__FUNCTION__)) { printf ("%s: Invalid device descriptor\n", __FUNCTION__); - } else - switch (desc->family) { - case Xilinx_Spartan2: -#if defined(CONFIG_FPGA_SPARTAN2) - PRINTF ("%s: Launching the Spartan-II Reader...\n", - __FUNCTION__); - ret_val = Spartan2_dump (desc, buf, bsize); -#else - printf ("%s: No support for Spartan-II devices.\n", - __FUNCTION__); -#endif - break; - case Xilinx_Spartan3: -#if defined(CONFIG_FPGA_SPARTAN3) - PRINTF ("%s: Launching the Spartan-III Reader...\n", - __FUNCTION__); - ret_val = Spartan3_dump (desc, buf, bsize); -#else - printf ("%s: No support for Spartan-III devices.\n", - __FUNCTION__); -#endif - break; - case Xilinx_Virtex2: -#if defined( CONFIG_FPGA_VIRTEX2) - PRINTF ("%s: Launching the Virtex-II Reader...\n", - __FUNCTION__); - ret_val = Virtex2_dump (desc, buf, bsize); -#else - printf ("%s: No support for Virtex-II devices.\n", - __FUNCTION__); -#endif - break; - case xilinx_zynq: -#if defined(CONFIG_FPGA_ZYNQPL) - PRINTF("%s: Launching the Zynq PL Reader...\n", - __func__); - ret_val = zynq_dump(desc, buf, bsize); -#else - printf("%s: No support for Zynq devices.\n", - __func__); -#endif - break; - - default: - printf ("%s: Unsupported family type, %d\n", - __FUNCTION__, desc->family); - } + return FPGA_FAIL; + } - return ret_val; + return desc->operations->dump(desc, buf, bsize); } -int xilinx_info (Xilinx_desc * desc) +int xilinx_info(xilinx_desc *desc) { int ret_val = FPGA_FAIL; if (xilinx_validate (desc, (char *)__FUNCTION__)) { printf ("Family: \t"); switch (desc->family) { - case Xilinx_Spartan2: + case xilinx_spartan2: printf ("Spartan-II\n"); break; - case Xilinx_Spartan3: + case xilinx_spartan3: printf ("Spartan-III\n"); break; - case Xilinx_Virtex2: + case xilinx_virtex2: printf ("Virtex-II\n"); break; case xilinx_zynq: @@ -315,47 +210,7 @@ int xilinx_info (Xilinx_desc * desc) if (desc->iface_fns) { printf ("Device Function Table @ 0x%p\n", desc->iface_fns); - switch (desc->family) { - case Xilinx_Spartan2: -#if defined(CONFIG_FPGA_SPARTAN2) - Spartan2_info (desc); -#else - /* just in case */ - printf ("%s: No support for Spartan-II devices.\n", - __FUNCTION__); -#endif - break; - case Xilinx_Spartan3: -#if defined(CONFIG_FPGA_SPARTAN3) - Spartan3_info (desc); -#else - /* just in case */ - printf ("%s: No support for Spartan-III devices.\n", - __FUNCTION__); -#endif - break; - case Xilinx_Virtex2: -#if defined(CONFIG_FPGA_VIRTEX2) - Virtex2_info (desc); -#else - /* just in case */ - printf ("%s: No support for Virtex-II devices.\n", - __FUNCTION__); -#endif - break; - case xilinx_zynq: -#if defined(CONFIG_FPGA_ZYNQPL) - zynq_info(desc); -#else - /* just in case */ - printf("%s: No support for Zynq devices.\n", - __func__); -#endif - /* Add new family types here */ - default: - /* we don't need a message here - we give one up above */ - ; - } + desc->operations->info(desc); } else printf ("No Device Function Table.\n"); @@ -369,7 +224,7 @@ int xilinx_info (Xilinx_desc * desc) /* ------------------------------------------------------------------------- */ -static int xilinx_validate (Xilinx_desc * desc, char *fn) +static int xilinx_validate(xilinx_desc *desc, char *fn) { int ret_val = false; diff --git a/drivers/fpga/zynqpl.c b/drivers/fpga/zynqpl.c index 923a158..c066f21 100644 --- a/drivers/fpga/zynqpl.c +++ b/drivers/fpga/zynqpl.c @@ -36,7 +36,7 @@ #define CONFIG_SYS_FPGA_PROG_TIME (CONFIG_SYS_HZ * 4) /* 4 s */ #endif -int zynq_info(Xilinx_desc *desc) +static int zynq_info(xilinx_desc *desc) { return FPGA_SUCCESS; } @@ -147,76 +147,57 @@ static void *check_data(u8 *buf, size_t bsize, u32 *swap) } /* Loop can be huge - support CTRL + C */ if (ctrlc()) - return 0; + return NULL; } - return 0; + return NULL; } - -int zynq_load(Xilinx_desc *desc, const void *buf, size_t bsize) +static int zynq_dma_transfer(u32 srcbuf, u32 srclen, u32 dstbuf, u32 dstlen) { - unsigned long ts; /* Timestamp */ - u32 partialbit = 0; - u32 i, control, isr_status, status, swap, diff; - u32 *buf_start; - - /* Detect if we are going working with partial or full bitstream */ - if (bsize != desc->size) { - printf("%s: Working with partial bitstream\n", __func__); - partialbit = 1; - } + unsigned long ts; + u32 isr_status; - buf_start = check_data((u8 *)buf, bsize, &swap); - if (!buf_start) - return FPGA_FAIL; - - /* Check if data is postpone from start */ - diff = (u32)buf_start - (u32)buf; - if (diff) { - printf("%s: Bitstream is not validated yet (diff %x)\n", - __func__, diff); - return FPGA_FAIL; - } + /* Set up the transfer */ + writel((u32)srcbuf, &devcfg_base->dma_src_addr); + writel(dstbuf, &devcfg_base->dma_dst_addr); + writel(srclen, &devcfg_base->dma_src_len); + writel(dstlen, &devcfg_base->dma_dst_len); - if ((u32)buf < SZ_1M) { - printf("%s: Bitstream has to be placed up to 1MB (%x)\n", - __func__, (u32)buf); - return FPGA_FAIL; - } + isr_status = readl(&devcfg_base->int_sts); - if ((u32)buf != ALIGN((u32)buf, ARCH_DMA_MINALIGN)) { - u32 *new_buf = (u32 *)ALIGN((u32)buf, ARCH_DMA_MINALIGN); + /* Polling the PCAP_INIT status for Set */ + ts = get_timer(0); + while (!(isr_status & DEVCFG_ISR_DMA_DONE)) { + if (isr_status & DEVCFG_ISR_ERROR_FLAGS_MASK) { + debug("%s: Error: isr = 0x%08X\n", __func__, + isr_status); + debug("%s: Write count = 0x%08X\n", __func__, + readl(&devcfg_base->write_count)); + debug("%s: Read count = 0x%08X\n", __func__, + readl(&devcfg_base->read_count)); - /* - * This might be dangerous but permits to flash if - * ARCH_DMA_MINALIGN is greater than header size - */ - if (new_buf > buf_start) { - debug("%s: Aligned buffer is after buffer start\n", - __func__); - new_buf -= ARCH_DMA_MINALIGN; + return FPGA_FAIL; } + if (get_timer(ts) > CONFIG_SYS_FPGA_PROG_TIME) { + printf("%s: Timeout wait for DMA to complete\n", + __func__); + return FPGA_FAIL; + } + isr_status = readl(&devcfg_base->int_sts); + } - printf("%s: Align buffer at %x to %x(swap %d)\n", __func__, - (u32)buf_start, (u32)new_buf, swap); - - for (i = 0; i < (bsize/4); i++) - new_buf[i] = load_word(&buf_start[i], swap); - - swap = SWAP_DONE; - buf = new_buf; - } else if (swap != SWAP_DONE) { - /* For bitstream which are aligned */ - u32 *new_buf = (u32 *)buf; + debug("%s: DMA transfer is done\n", __func__); - printf("%s: Bitstream is not swapped(%d) - swap it\n", __func__, - swap); + /* Clear out the DMA status */ + writel(DEVCFG_ISR_DMA_DONE, &devcfg_base->int_sts); - for (i = 0; i < (bsize/4); i++) - new_buf[i] = load_word(&buf_start[i], swap); + return FPGA_SUCCESS; +} - swap = SWAP_DONE; - } +static int zynq_dma_xfer_init(u32 partialbit) +{ + u32 status, control, isr_status; + unsigned long ts; /* Clear loopback bit */ clrbits_le32(&devcfg_base->mctrl, DEVCFG_MCTRL_PCAP_LPBK); @@ -298,6 +279,101 @@ int zynq_load(Xilinx_desc *desc, const void *buf, size_t bsize) writel(DEVCFG_STATUS_DMA_DONE_CNT_MASK, &devcfg_base->status); } + return FPGA_SUCCESS; +} + +static u32 *zynq_align_dma_buffer(u32 *buf, u32 len, u32 swap) +{ + u32 *new_buf; + u32 i; + + if ((u32)buf != ALIGN((u32)buf, ARCH_DMA_MINALIGN)) { + new_buf = (u32 *)ALIGN((u32)buf, ARCH_DMA_MINALIGN); + + /* + * This might be dangerous but permits to flash if + * ARCH_DMA_MINALIGN is greater than header size + */ + if (new_buf > buf) { + debug("%s: Aligned buffer is after buffer start\n", + __func__); + new_buf -= ARCH_DMA_MINALIGN; + } + printf("%s: Align buffer at %x to %x(swap %d)\n", __func__, + (u32)buf, (u32)new_buf, swap); + + for (i = 0; i < (len/4); i++) + new_buf[i] = load_word(&buf[i], swap); + + buf = new_buf; + } else if (swap != SWAP_DONE) { + /* For bitstream which are aligned */ + u32 *new_buf = (u32 *)buf; + + printf("%s: Bitstream is not swapped(%d) - swap it\n", __func__, + swap); + + for (i = 0; i < (len/4); i++) + new_buf[i] = load_word(&buf[i], swap); + } + + return buf; +} + +static int zynq_validate_bitstream(xilinx_desc *desc, const void *buf, + size_t bsize, u32 blocksize, u32 *swap, + u32 *partialbit) +{ + u32 *buf_start; + u32 diff; + + /* Detect if we are going working with partial or full bitstream */ + if (bsize != desc->size) { + printf("%s: Working with partial bitstream\n", __func__); + *partialbit = 1; + } + buf_start = check_data((u8 *)buf, blocksize, swap); + + if (!buf_start) + return FPGA_FAIL; + + /* Check if data is postpone from start */ + diff = (u32)buf_start - (u32)buf; + if (diff) { + printf("%s: Bitstream is not validated yet (diff %x)\n", + __func__, diff); + return FPGA_FAIL; + } + + if ((u32)buf < SZ_1M) { + printf("%s: Bitstream has to be placed up to 1MB (%x)\n", + __func__, (u32)buf); + return FPGA_FAIL; + } + + if (zynq_dma_xfer_init(*partialbit)) + return FPGA_FAIL; + + return 0; +} + + +static int zynq_load(xilinx_desc *desc, const void *buf, size_t bsize) +{ + unsigned long ts; /* Timestamp */ + u32 partialbit = 0; + u32 isr_status, swap; + + /* + * send bsize inplace of blocksize as it was not a bitstream + * in chunks + */ + if (zynq_validate_bitstream(desc, buf, bsize, bsize, &swap, + &partialbit)) + return FPGA_FAIL; + + buf = zynq_align_dma_buffer((u32 *)buf, bsize, swap); + debug("%s: Source = 0x%08X\n", __func__, (u32)buf); debug("%s: Size = %zu\n", __func__, bsize); @@ -305,37 +381,10 @@ int zynq_load(Xilinx_desc *desc, const void *buf, size_t bsize) flush_dcache_range((u32)buf, (u32)buf + roundup(bsize, ARCH_DMA_MINALIGN)); - /* Set up the transfer */ - writel((u32)buf | 1, &devcfg_base->dma_src_addr); - writel(0xFFFFFFFF, &devcfg_base->dma_dst_addr); - writel(bsize >> 2, &devcfg_base->dma_src_len); - writel(0, &devcfg_base->dma_dst_len); + if (zynq_dma_transfer((u32)buf | 1, bsize >> 2, 0xffffffff, 0)) + return FPGA_FAIL; isr_status = readl(&devcfg_base->int_sts); - - /* Polling the PCAP_INIT status for Set */ - ts = get_timer(0); - while (!(isr_status & DEVCFG_ISR_DMA_DONE)) { - if (isr_status & DEVCFG_ISR_ERROR_FLAGS_MASK) { - debug("%s: Error: isr = 0x%08X\n", __func__, - isr_status); - debug("%s: Write count = 0x%08X\n", __func__, - readl(&devcfg_base->write_count)); - debug("%s: Read count = 0x%08X\n", __func__, - readl(&devcfg_base->read_count)); - - return FPGA_FAIL; - } - if (get_timer(ts) > CONFIG_SYS_FPGA_PROG_TIME) { - printf("%s: Timeout wait for DMA to complete\n", - __func__); - return FPGA_FAIL; - } - isr_status = readl(&devcfg_base->int_sts); - } - - debug("%s: DMA transfer is done\n", __func__); - /* Check FPGA configuration completion */ ts = get_timer(0); while (!(isr_status & DEVCFG_ISR_PCFG_DONE)) { @@ -349,16 +398,19 @@ int zynq_load(Xilinx_desc *desc, const void *buf, size_t bsize) debug("%s: FPGA config done\n", __func__); - /* Clear out the DMA status */ - writel(DEVCFG_ISR_DMA_DONE, &devcfg_base->int_sts); - if (!partialbit) zynq_slcr_devcfg_enable(); return FPGA_SUCCESS; } -int zynq_dump(Xilinx_desc *desc, const void *buf, size_t bsize) +static int zynq_dump(xilinx_desc *desc, const void *buf, size_t bsize) { return FPGA_FAIL; } + +struct xilinx_fpga_op zynq_op = { + .load = zynq_load, + .dump = zynq_dump, + .info = zynq_info, +}; diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c index 90c8387..5ba0e03 100644 --- a/drivers/i2c/mvtwsi.c +++ b/drivers/i2c/mvtwsi.c @@ -216,21 +216,7 @@ static int twsi_stop(int status) */ #define TWSI_FREQUENCY(m, n) \ - ((u8) (CONFIG_SYS_TCLK / (10 * (m + 1) * 2 * (1 << n)))) - -/* - * These are required to be reprogrammed before enabling the controller - * because a reset loses them. - * Default values come from the spec, but a twsi_reset will change them. - * twsi_slave_address left uninitialized lest checkpatch.pl complains. - */ - -/* Baudrate generator: m (bits 7..4) =4, n (bits 3..0) =4 */ -static u8 twsi_baud_rate = 0x44; /* baudrate at controller reset */ -/* Default frequency corresponding to default m=4, n=4 */ -static u8 twsi_actual_speed = TWSI_FREQUENCY(4, 4); -/* Default slave address is 0 (so is an uninitialized static) */ -static u8 twsi_slave_address; + (CONFIG_SYS_TCLK / (10 * (m + 1) * (1 << n))) /* * Reset controller. @@ -238,7 +224,7 @@ static u8 twsi_slave_address; * Controller reset also resets the baud rate and slave address, so * re-establish them. */ -static void twsi_reset(void) +static void twsi_reset(u8 baud_rate, u8 slave_address) { /* ensure controller will be enabled by any twsi*() function */ twsi_control_flags = MVTWSI_CONTROL_TWSIEN; @@ -247,9 +233,9 @@ static void twsi_reset(void) /* wait 2 ms -- this is what the Marvell LSP does */ udelay(20000); /* set baud rate */ - writel(twsi_baud_rate, &twsi->baudrate); + writel(baud_rate, &twsi->baudrate); /* set slave address even though we don't use it */ - writel(twsi_slave_address, &twsi->slave_address); + writel(slave_address, &twsi->slave_address); writel(0, &twsi->xtnd_slave_addr); /* assert STOP but don't care for the result */ (void) twsi_stop(0); @@ -277,12 +263,8 @@ void i2c_init(int requested_speed, int slaveadd) } } } - /* save baud rate and slave for later calls to twsi_reset */ - twsi_baud_rate = baud; - twsi_actual_speed = highest_speed; - twsi_slave_address = slaveadd; /* reset controller */ - twsi_reset(); + twsi_reset(baud, slaveadd); } /* diff --git a/drivers/i2c/zynq_i2c.c b/drivers/i2c/zynq_i2c.c index f1f6513..b3264af 100644 --- a/drivers/i2c/zynq_i2c.c +++ b/drivers/i2c/zynq_i2c.c @@ -142,7 +142,7 @@ static u32 zynq_i2c_wait(struct zynq_i2c_registers *zynq_i2c, u32 mask) break; } #ifdef DEBUG - zynq_i2c_debug_status(zynq_i2c)); + zynq_i2c_debug_status(zynq_i2c); #endif /* Clear interrupt status flags */ writel(int_status & mask, &zynq_i2c->interrupt_status); @@ -235,7 +235,7 @@ static int zynq_i2c_read(struct i2c_adapter *adap, u8 dev, uint addr, clrbits_le32(&zynq_i2c->control, ZYNQ_I2C_CONTROL_HOLD); #ifdef DEBUG - zynq_i2c_debug_status(); + zynq_i2c_debug_status(zynq_i2c); #endif return 0; } diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 4c3b93d..50cba64 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -96,7 +96,7 @@ static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data) else if (cmd->resp_type & MMC_RSP_PRESENT) xfertyp |= XFERTYP_RSPTYP_48; -#if defined(CONFIG_MX53) || defined(CONFIG_T4240QDS) +#if defined(CONFIG_MX53) || defined(CONFIG_PPC_T4240) if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION) xfertyp |= XFERTYP_CMDTYP_ABORT; #endif diff --git a/drivers/net/designware.c b/drivers/net/designware.c index c45593b..78751b2 100644 --- a/drivers/net/designware.c +++ b/drivers/net/designware.c @@ -390,6 +390,8 @@ static int dw_phy_init(struct eth_device *dev) if (!phydev) return -1; + phy_connect_dev(phydev, dev); + phydev->supported &= PHY_GBIT_FEATURES; phydev->advertising = phydev->supported; diff --git a/drivers/net/dm9000x.c b/drivers/net/dm9000x.c index b68d808..4de9d41 100644 --- a/drivers/net/dm9000x.c +++ b/drivers/net/dm9000x.c @@ -345,7 +345,7 @@ static int dm9000_init(struct eth_device *dev, bd_t *bd) if (!is_valid_ether_addr(dev->enetaddr)) { #ifdef CONFIG_RANDOM_MACADDR printf("Bad MAC address (uninitialized EEPROM?), randomizing\n"); - eth_random_enetaddr(dev->enetaddr); + eth_random_addr(dev->enetaddr); printf("MAC: %pM\n", dev->enetaddr); #else printf("WARNING: Bad MAC address (uninitialized EEPROM?)\n"); diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile index ee5d768..5ae3b16 100644 --- a/drivers/net/fm/Makefile +++ b/drivers/net/fm/Makefile @@ -32,5 +32,6 @@ obj-$(CONFIG_PPC_T2080) += t2080.o obj-$(CONFIG_PPC_T2081) += t2080.o obj-$(CONFIG_PPC_T4240) += t4240.o obj-$(CONFIG_PPC_T4160) += t4240.o +obj-$(CONFIG_PPC_T4080) += t4240.o obj-$(CONFIG_PPC_B4420) += b4860.o obj-$(CONFIG_PPC_B4860) += b4860.o diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c index 2f4bc11..de9c0e9 100644 --- a/drivers/net/fm/memac_phy.c +++ b/drivers/net/fm/memac_phy.c @@ -29,10 +29,8 @@ int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr, c45 = 0; /* clause 22 */ dev_addr = regnum & 0x1f; clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC); - } else { + } else setbits_be32(®s->mdio_stat, MDIO_STAT_ENC); - setbits_be32(®s->mdio_stat, MDIO_STAT_HOLD_15_CLK); - } /* Wait till the bus is free */ while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY) @@ -76,10 +74,8 @@ int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr, c45 = 0; /* clause 22 */ dev_addr = regnum & 0x1f; clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC); - } else { + } else setbits_be32(®s->mdio_stat, MDIO_STAT_ENC); - setbits_be32(®s->mdio_stat, MDIO_STAT_HOLD_15_CLK); - } /* Wait till the bus is free */ while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY) diff --git a/drivers/net/ftmac110.c b/drivers/net/ftmac110.c index 8eee272..98c4f09 100644 --- a/drivers/net/ftmac110.c +++ b/drivers/net/ftmac110.c @@ -425,7 +425,7 @@ int ftmac110_initialize(bd_t *bis) dev->recv = ftmac110_recv; if (!eth_getenv_enetaddr_by_index("eth", card_nr, dev->enetaddr)) - eth_random_enetaddr(dev->enetaddr); + eth_random_addr(dev->enetaddr); /* allocate tx descriptors (it must be 16 bytes aligned) */ chip->txd = dma_alloc_coherent( diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c index abd4e5b..d509e30 100644 --- a/drivers/net/phy/atheros.c +++ b/drivers/net/phy/atheros.c @@ -31,9 +31,7 @@ static int ar8035_config(struct phy_device *phydev) regval = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e); phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, (regval|0x0100)); - genphy_config_aneg(phydev); - - phy_reset(phydev); + phydev->supported = phydev->drv->features; return 0; } diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index c691fbb..230ed97 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -18,6 +18,7 @@ #include <phy.h> #include <errno.h> #include <linux/err.h> +#include <linux/compiler.h> /* Generic PHY support and helper functions */ @@ -577,7 +578,7 @@ static struct phy_device *phy_device_create(struct mii_dev *bus, int addr, * Description: Reads the ID registers of the PHY at @addr on the * @bus, stores it in @phy_id and returns zero on success. */ -static int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) +int __weak get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id) { int phy_reg; diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index 3a55d27..c58fe50 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -58,6 +58,14 @@ #define MIIM_VSC8514_18G_QSGMII 0x80e0 #define MIIM_VSC8514_18G_CMDSTAT 0x8000 +/* Vitesse VSC8664 Control/Status Register */ +#define MIIM_VSC8664_SERDES_AND_SIGDET 0x13 +#define MIIM_VSC8664_ADDITIONAL_DEV 0x16 +#define MIIM_VSC8664_EPHY_CON 0x17 +#define MIIM_VSC8664_LED_CON 0x1E + +#define PHY_EXT_PAGE_ACCESS_EXTENDED 0x0001 + /* CIS8201 */ static int vitesse_config(struct phy_device *phydev) { @@ -244,6 +252,33 @@ static int vsc8514_config(struct phy_device *phydev) return 0; } +static int vsc8664_config(struct phy_device *phydev) +{ + u32 val; + + /* Enable MAC interface auto-negotiation */ + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_EPHY_CON); + val |= (1 << 13); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_EPHY_CON, val); + + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, + PHY_EXT_PAGE_ACCESS_EXTENDED); + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_SERDES_AND_SIGDET); + val |= (1 << 11); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_SERDES_AND_SIGDET, val); + phy_write(phydev, MDIO_DEVAD_NONE, PHY_EXT_PAGE_ACCESS, 0); + + /* Enable LED blink */ + val = phy_read(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_LED_CON); + val &= ~(1 << 2); + phy_write(phydev, MDIO_DEVAD_NONE, MIIM_VSC8664_LED_CON, val); + + genphy_config_aneg(phydev); + + return 0; +} + static struct phy_driver VSC8211_driver = { .name = "Vitesse VSC8211", .uid = 0xfc4b0, @@ -334,6 +369,16 @@ static struct phy_driver VSC8662_driver = { .shutdown = &genphy_shutdown, }; +static struct phy_driver VSC8664_driver = { + .name = "Vitesse VSC8664", + .uid = 0x70660, + .mask = 0xffff0, + .features = PHY_GBIT_FEATURES, + .config = &vsc8664_config, + .startup = &vitesse_startup, + .shutdown = &genphy_shutdown, +}; + /* Vitesse bought Cicada, so we'll put these here */ static struct phy_driver cis8201_driver = { .name = "CIS8201", @@ -366,6 +411,7 @@ int phy_vitesse_init(void) phy_register(&VSC8574_driver); phy_register(&VSC8514_driver); phy_register(&VSC8662_driver); + phy_register(&VSC8664_driver); phy_register(&cis8201_driver); phy_register(&cis8204_driver); diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index 6317fb1..3a41b0e 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -49,8 +49,13 @@ static void set_inbound_window(volatile pit_t *pi, u64 size) { u32 sz = (__ilog2_u64(size) - 1); - u32 flag = PIWAR_EN | PIWAR_LOCAL | - PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; +#ifdef CONFIG_SYS_FSL_ERRATUM_A005434 + u32 flag = 0; +#else + u32 flag = PIWAR_LOCAL; +#endif + + flag |= PIWAR_EN | PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP; out_be32(&pi->pitar, r->phys_start >> 12); out_be32(&pi->piwbar, r->bus_start >> 12); diff --git a/drivers/power/tps6586x.c b/drivers/power/tps6586x.c index 704c243..d29d969 100644 --- a/drivers/power/tps6586x.c +++ b/drivers/power/tps6586x.c @@ -32,7 +32,7 @@ enum { }; #define MAX_I2C_RETRY 3 -int tps6586x_read(int reg) +static int tps6586x_read(int reg) { int i; uchar data; @@ -61,7 +61,7 @@ exit: return retval; } -int tps6586x_write(int reg, uchar *data, uint len) +static int tps6586x_write(int reg, uchar *data, uint len) { int i; int retval = -1; diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index b1da75e..9c5fbd1 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -14,6 +14,8 @@ #include "asm/immap_qe.h" #include "qe.h" +#define MPC85xx_DEVDISR_QE_DISABLE 0x1 + qe_map_t *qe_immr = NULL; static qe_snum_t snums[QE_NUM_OF_SNUM]; @@ -317,7 +319,9 @@ int qe_upload_firmware(const struct qe_firmware *firmware) size_t calc_size = sizeof(struct qe_firmware); size_t length; const struct qe_header *hdr; - +#ifdef CONFIG_DEEP_SLEEP + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#endif if (!firmware) { printf("Invalid address\n"); return -EINVAL; @@ -330,6 +334,9 @@ int qe_upload_firmware(const struct qe_firmware *firmware) if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || (hdr->magic[2] != 'F')) { printf("Not a microcode\n"); +#ifdef CONFIG_DEEP_SLEEP + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_QE_DISABLE); +#endif return -EPERM; } diff --git a/drivers/serial/ns16550.c b/drivers/serial/ns16550.c index 8a13454..f26979d 100644 --- a/drivers/serial/ns16550.c +++ b/drivers/serial/ns16550.c @@ -33,6 +33,12 @@ #if defined(CONFIG_K2HK_EVM) #define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0 #define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0)) +#undef UART_MCRVAL +#ifdef CONFIG_SERIAL_HW_FLOW_CONTROL +#define UART_MCRVAL (UART_MCR_RTS | UART_MCR_AFE) +#else +#define UART_MCRVAL (UART_MCR_RTS) +#endif #endif #ifndef CONFIG_SYS_NS16550_IER diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index c4fb59c..fd61a5e 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -74,9 +74,6 @@ static int on_baudrate(const char *name, const char *value, enum env_op op, } gd->baudrate = baudrate; -#if defined(CONFIG_PPC) || defined(CONFIG_MCF52x2) - gd->bd->bi_baudrate = baudrate; -#endif serial_setbrg(); @@ -502,12 +499,11 @@ int uart_post_test(int flags) unsigned char c; int ret, saved_baud, b; struct serial_device *saved_dev, *s; - bd_t *bd = gd->bd; /* Save current serial state */ ret = 0; saved_dev = serial_current; - saved_baud = bd->bi_baudrate; + saved_baud = gd->baudrate; for (s = serial_devices; s; s = s->next) { /* If this driver doesn't support loop back, skip it */ @@ -530,7 +526,7 @@ int uart_post_test(int flags) /* Test every available baud rate */ for (b = 0; b < ARRAY_SIZE(bauds); ++b) { - bd->bi_baudrate = bauds[b]; + gd->baudrate = bauds[b]; serial_setbrg(); /* @@ -572,7 +568,7 @@ int uart_post_test(int flags) done: /* Restore previous serial state */ serial_current = saved_dev; - bd->bi_baudrate = saved_baud; + gd->baudrate = saved_baud; serial_reinit_all(); serial_setbrg(); diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 6cb4d98..45062e6 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -104,15 +104,20 @@ int ehci_hcd_init(int index, enum usb_init_type init, if (!strncmp(phy_type, "utmi", 4)) { #if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY) - setbits_be32(&ehci->control, PHY_CLK_SEL_UTMI); - setbits_be32(&ehci->control, UTMI_PHY_EN); + clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, + PHY_CLK_SEL_UTMI); + clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, + UTMI_PHY_EN); udelay(1000); /* delay required for PHY Clk to appear */ #endif out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI); - setbits_be32(&ehci->control, USB_EN); + clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, + USB_EN); } else { - setbits_be32(&ehci->control, PHY_CLK_SEL_ULPI); - clrsetbits_be32(&ehci->control, UTMI_PHY_EN, USB_EN); + clrsetbits_be32(&ehci->control, CONTROL_REGISTER_W1C_MASK, + PHY_CLK_SEL_ULPI); + clrsetbits_be32(&ehci->control, UTMI_PHY_EN | + CONTROL_REGISTER_W1C_MASK, USB_EN); udelay(1000); /* delay required for PHY Clk to appear */ if (!usb_phy_clk_valid(ehci)) return -EINVAL; diff --git a/drivers/video/atmel_hlcdfb.c b/drivers/video/atmel_hlcdfb.c index 853303b..bb4d7d8 100644 --- a/drivers/video/atmel_hlcdfb.c +++ b/drivers/video/atmel_hlcdfb.c @@ -128,12 +128,12 @@ void lcd_ctrl_init(void *lcdbase) value |= LCDC_LCDCFG1_HSPW(panel_info.vl_hsync_len - 1); lcdc_writel(®s->lcdc_lcdcfg1, value); - value = LCDC_LCDCFG2_VBPW(panel_info.vl_lower_margin); - value |= LCDC_LCDCFG2_VFPW(panel_info.vl_upper_margin - 1); + value = LCDC_LCDCFG2_VBPW(panel_info.vl_upper_margin); + value |= LCDC_LCDCFG2_VFPW(panel_info.vl_lower_margin - 1); lcdc_writel(®s->lcdc_lcdcfg2, value); - value = LCDC_LCDCFG3_HBPW(panel_info.vl_right_margin - 1); - value |= LCDC_LCDCFG3_HFPW(panel_info.vl_left_margin - 1); + value = LCDC_LCDCFG3_HBPW(panel_info.vl_left_margin - 1); + value |= LCDC_LCDCFG3_HFPW(panel_info.vl_right_margin - 1); lcdc_writel(®s->lcdc_lcdcfg3, value); /* Display size */ diff --git a/drivers/video/mxc_ipuv3_fb.c b/drivers/video/mxc_ipuv3_fb.c index 3e21fb2..f75d770 100644 --- a/drivers/video/mxc_ipuv3_fb.c +++ b/drivers/video/mxc_ipuv3_fb.c @@ -13,6 +13,7 @@ #include <common.h> #include <asm/errno.h> +#include <asm/global_data.h> #include <linux/string.h> #include <linux/list.h> #include <linux/fb.h> @@ -24,6 +25,8 @@ #include "mxcfb.h" #include "ipu_regs.h" +DECLARE_GLOBAL_DATA_PTR; + static int mxcfb_map_video_memory(struct fb_info *fbi); static int mxcfb_unmap_video_memory(struct fb_info *fbi); @@ -415,6 +418,8 @@ static int mxcfb_map_video_memory(struct fb_info *fbi) fbi->screen_size = fbi->fix.smem_len; + gd->fb_base = fbi->fix.smem_start; + /* Clear the screen */ memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); diff --git a/fs/ext4/ext4_common.c b/fs/ext4/ext4_common.c index 02da75c..1c11721 100644 --- a/fs/ext4/ext4_common.c +++ b/fs/ext4/ext4_common.c @@ -904,10 +904,8 @@ long int ext4fs_get_new_blk_no(void) restart: fs->curr_blkno++; /* get the blockbitmap index respective to blockno */ - if (fs->blksz != 1024) { - bg_idx = fs->curr_blkno / blk_per_grp; - } else { - bg_idx = fs->curr_blkno / blk_per_grp; + bg_idx = fs->curr_blkno / blk_per_grp; + if (fs->blksz == 1024) { remainder = fs->curr_blkno % blk_per_grp; if (!remainder) bg_idx--; @@ -1843,16 +1841,20 @@ long int read_allocated_block(struct ext2_inode *inode, int fileblock) return blknr; } -void ext4fs_close(void) +/** + * ext4fs_reinit_global() - Reinitialize values of ext4 write implementation's + * global pointers + * + * This function assures that for a file with the same name but different size + * the sequential store on the ext4 filesystem will be correct. + * + * In this function the global data, responsible for internal representation + * of the ext4 data are initialized to the reset state. Without this, during + * replacement of the smaller file with the bigger truncation of new file was + * performed. + */ +void ext4fs_reinit_global(void) { - if ((ext4fs_file != NULL) && (ext4fs_root != NULL)) { - ext4fs_free_node(ext4fs_file, &ext4fs_root->diropen); - ext4fs_file = NULL; - } - if (ext4fs_root != NULL) { - free(ext4fs_root); - ext4fs_root = NULL; - } if (ext4fs_indir1_block != NULL) { free(ext4fs_indir1_block); ext4fs_indir1_block = NULL; @@ -1872,6 +1874,19 @@ void ext4fs_close(void) ext4fs_indir3_blkno = -1; } } +void ext4fs_close(void) +{ + if ((ext4fs_file != NULL) && (ext4fs_root != NULL)) { + ext4fs_free_node(ext4fs_file, &ext4fs_root->diropen); + ext4fs_file = NULL; + } + if (ext4fs_root != NULL) { + free(ext4fs_root); + ext4fs_root = NULL; + } + + ext4fs_reinit_global(); +} int ext4fs_iterate_dir(struct ext2fs_node *dir, char *name, struct ext2fs_node **fnode, int *ftype) diff --git a/fs/ext4/ext4_write.c b/fs/ext4/ext4_write.c index b674b6f..c42add9 100644 --- a/fs/ext4/ext4_write.c +++ b/fs/ext4/ext4_write.c @@ -116,10 +116,8 @@ static void delete_single_indirect_block(struct ext2_inode *inode) if (inode->b.blocks.indir_block != 0) { debug("SIPB releasing %u\n", inode->b.blocks.indir_block); blknr = inode->b.blocks.indir_block; - if (fs->blksz != 1024) { - bg_idx = blknr / blk_per_grp; - } else { - bg_idx = blknr / blk_per_grp; + bg_idx = blknr / blk_per_grp; + if (fs->blksz == 1024) { remainder = blknr % blk_per_grp; if (!remainder) bg_idx--; @@ -181,11 +179,9 @@ static void delete_double_indirect_block(struct ext2_inode *inode) break; debug("DICB releasing %u\n", *di_buffer); - if (fs->blksz != 1024) { - bg_idx = (*di_buffer) / blk_per_grp; - } else { - bg_idx = (*di_buffer) / blk_per_grp; - remainder = (*di_buffer) % blk_per_grp; + bg_idx = *di_buffer / blk_per_grp; + if (fs->blksz == 1024) { + remainder = *di_buffer % blk_per_grp; if (!remainder) bg_idx--; } @@ -213,10 +209,8 @@ static void delete_double_indirect_block(struct ext2_inode *inode) /* removing the parent double indirect block */ blknr = inode->b.blocks.double_indir_block; - if (fs->blksz != 1024) { - bg_idx = blknr / blk_per_grp; - } else { - bg_idx = blknr / blk_per_grp; + bg_idx = blknr / blk_per_grp; + if (fs->blksz == 1024) { remainder = blknr % blk_per_grp; if (!remainder) bg_idx--; @@ -293,12 +287,9 @@ static void delete_triple_indirect_block(struct ext2_inode *inode) for (j = 0; j < fs->blksz / sizeof(int); j++) { if (*tip_buffer == 0) break; - if (fs->blksz != 1024) { - bg_idx = (*tip_buffer) / blk_per_grp; - } else { - bg_idx = (*tip_buffer) / blk_per_grp; - - remainder = (*tip_buffer) % blk_per_grp; + bg_idx = *tip_buffer / blk_per_grp; + if (fs->blksz == 1024) { + remainder = *tip_buffer % blk_per_grp; if (!remainder) bg_idx--; } @@ -336,12 +327,9 @@ static void delete_triple_indirect_block(struct ext2_inode *inode) * removing the grand parent blocks * which is connected to inode */ - if (fs->blksz != 1024) { - bg_idx = (*tigp_buffer) / blk_per_grp; - } else { - bg_idx = (*tigp_buffer) / blk_per_grp; - - remainder = (*tigp_buffer) % blk_per_grp; + bg_idx = *tigp_buffer / blk_per_grp; + if (fs->blksz == 1024) { + remainder = *tigp_buffer % blk_per_grp; if (!remainder) bg_idx--; } @@ -371,10 +359,8 @@ static void delete_triple_indirect_block(struct ext2_inode *inode) /* removing the grand parent triple indirect block */ blknr = inode->b.blocks.triple_indir_block; - if (fs->blksz != 1024) { - bg_idx = blknr / blk_per_grp; - } else { - bg_idx = blknr / blk_per_grp; + bg_idx = blknr / blk_per_grp; + if (fs->blksz == 1024) { remainder = blknr % blk_per_grp; if (!remainder) bg_idx--; @@ -452,10 +438,8 @@ static int ext4fs_delete_file(int inodeno) for (i = 0; i < no_blocks; i++) { blknr = read_allocated_block(&(node_inode->inode), i); - if (fs->blksz != 1024) { - bg_idx = blknr / blk_per_grp; - } else { - bg_idx = blknr / blk_per_grp; + bg_idx = blknr / blk_per_grp; + if (fs->blksz == 1024) { remainder = blknr % blk_per_grp; if (!remainder) bg_idx--; @@ -499,10 +483,8 @@ static int ext4fs_delete_file(int inodeno) no_blocks++; for (i = 0; i < no_blocks; i++) { blknr = read_allocated_block(&inode, i); - if (fs->blksz != 1024) { - bg_idx = blknr / blk_per_grp; - } else { - bg_idx = blknr / blk_per_grp; + bg_idx = blknr / blk_per_grp; + if (fs->blksz == 1024) { remainder = blknr % blk_per_grp; if (!remainder) bg_idx--; @@ -580,6 +562,7 @@ static int ext4fs_delete_file(int inodeno) ext4fs_update(); ext4fs_deinit(); + ext4fs_reinit_global(); if (ext4fs_init() != 0) { printf("error in File System init\n"); diff --git a/fs/fat/fat_write.c b/fs/fat/fat_write.c index 9f5e911..ba7e3ae 100644 --- a/fs/fat/fat_write.c +++ b/fs/fat/fat_write.c @@ -139,6 +139,11 @@ static __u32 get_fatent_value(fsdata *mydata, __u32 entry) __u32 ret = 0x00; __u16 val1, val2; + if (CHECK_CLUST(entry, mydata->fatsize)) { + printf("Error: Invalid FAT entry: 0x%08x\n", entry); + return ret; + } + switch (mydata->fatsize) { case 32: bufnum = entry / FAT32BUFSIZE; @@ -881,8 +886,30 @@ static dir_entry *find_directory_entry(fsdata *mydata, int startsect, return dentptr; } + /* + * In FAT16/12, the root dir is locate before data area, shows + * in following: + * ------------------------------------------------------------- + * | Boot | FAT1 & 2 | Root dir | Data (start from cluster #2) | + * ------------------------------------------------------------- + * + * As a result if curclust is in Root dir, it is a negative + * number or 0, 1. + * + */ + if (mydata->fatsize != 32 && (int)curclust <= 1) { + /* Current clust is in root dir, set to next clust */ + curclust++; + if ((int)curclust <= 1) + continue; /* continue to find */ + + /* Reach the end of root dir */ + empty_dentptr = dentptr; + return NULL; + } + curclust = get_fatent_value(mydata, dir_curclust); - if ((curclust >= 0xffffff8) || (curclust >= 0xfff8)) { + if (IS_LAST_CLUST(curclust, mydata->fatsize)) { empty_dentptr = dentptr; return NULL; } @@ -952,7 +979,7 @@ static int do_fat_write(const char *filename, void *buffer, } mydata->fatbufnum = -1; - mydata->fatbuf = malloc(FATBUFSIZE); + mydata->fatbuf = memalign(ARCH_DMA_MINALIGN, FATBUFSIZE); if (mydata->fatbuf == NULL) { debug("Error: allocating memory\n"); return -1; diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index 67f115f..748ab67 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -734,7 +734,6 @@ static int mount_ubifs(struct ubifs_info *c) ubifs_msg("reserved for root: %llu bytes (%llu KiB)", c->report_rp_size, c->report_rp_size >> 10); - dbg_msg("compiled on: " __DATE__ " at " __TIME__); dbg_msg("min. I/O unit size: %d bytes", c->min_io_size); dbg_msg("LEB size: %d bytes (%d KiB)", c->leb_size, c->leb_size >> 10); diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index c18e4ca..62cb1ea 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -66,7 +66,6 @@ typedef struct bd_info { unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ #endif - unsigned int bi_baudrate; /* Console Baudrate */ #if defined(CONFIG_405) || \ defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || \ diff --git a/include/common.h b/include/common.h index 5fb0bb2..13e5dc7 100644 --- a/include/common.h +++ b/include/common.h @@ -729,9 +729,12 @@ void get_sys_info ( sys_info_t * ); #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) void cpu_init_f (volatile immap_t *immr); #endif -#if defined(CONFIG_4xx) || defined(CONFIG_MPC85xx) || defined(CONFIG_MCF52x2) ||defined(CONFIG_MPC86xx) +#if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx) void cpu_init_f (void); #endif +#ifdef CONFIG_MPC85xx +ulong cpu_init_f(void); +#endif int cpu_init_r (void); #if defined(CONFIG_MPC8260) @@ -820,12 +823,10 @@ char * strmhz(char *buf, unsigned long hz); #include <u-boot/crc.h> /* lib/rand.c */ -#if defined(CONFIG_LIB_RAND) || defined(CONFIG_LIB_HW_RAND) #define RAND_MAX -1U void srand(unsigned int seed); unsigned int rand(void); unsigned int rand_r(unsigned int *seedp); -#endif /* common/console.c */ int console_init_f(void); /* Before relocation; uses the serial stuff */ diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h index e6fb47b..b304a41 100644 --- a/include/config_fallbacks.h +++ b/include/config_fallbacks.h @@ -71,6 +71,10 @@ #define CONFIG_LIB_RAND #endif +#if defined(CONFIG_API) && defined(CONFIG_LCD) +#define CONFIG_CMD_BMP +#endif + #ifndef CONFIG_SYS_PROMPT #define CONFIG_SYS_PROMPT "=> " #endif diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index df371b7..1af9ba6 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -7,6 +7,9 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + /* * B4860 QDS board configuration file */ @@ -115,6 +118,17 @@ #define IDT_SERDES1_ADDRESS 0x6E #define IDT_SERDES2_ADDRESS 0x6C +/* Voltage monitor on channel 2*/ +#define I2C_MUX_CH_VOL_MONITOR 0xa +#define I2C_VOL_MONITOR_ADDR 0x40 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +#define CONFIG_ZM7300 +#define I2C_MUX_CH_DPM 0xa +#define I2C_DPM_ADDR 0x28 + #define CONFIG_ENV_OVERWRITE #ifdef CONFIG_SYS_NO_FLASH @@ -547,15 +561,15 @@ unsigned long get_board_ddr_clk(void); * for slave u-boot IMAGE instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull /* * for slave UCODE and ENV instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ @@ -824,8 +838,7 @@ unsigned long get_board_ddr_clk(void); "ramdiskfile=b4860qds/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=b4860qds/b4860qds.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" /* For emulation this causes u-boot to jump to the start of the proof point app code automatically */ diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index e76a04b..7bb5d33 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -360,7 +360,7 @@ combinations. this should be removed later #endif /* Set up IFC registers for boot location NOR/NAND */ -#if defined(CONFIG_NAND) +#if defined(CONFIG_NAND) || defined(CONFIG_NAND_SECBOOT) #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index f15e162..72f5fde 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -11,6 +11,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #include "../board/freescale/common/ics307_clk.h" #ifdef CONFIG_36BIT diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 7b63945..48ae9d4 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -11,6 +11,9 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + #include "../board/freescale/common/ics307_clk.h" #ifdef CONFIG_36BIT @@ -30,7 +33,7 @@ #endif #ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xeff80000 +#define CONFIG_SYS_TEXT_BASE 0xeff40000 #endif #ifndef CONFIG_RESET_VECTOR_ADDRESS diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index 7443ace..a0d7d52 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -16,6 +16,9 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + /* High Level Configuration Options */ #define CONFIG_MPC8641 1 /* MPC8641 specific */ #define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */ diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index 0f04067..110ba5f 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -20,39 +20,119 @@ #ifdef CONFIG_P1011RDB #define CONFIG_P1011 +#define CONFIG_SYS_L2_SIZE (256 << 10) #endif #ifdef CONFIG_P1020RDB #define CONFIG_P1020 +#define CONFIG_SYS_L2_SIZE (256 << 10) #endif #ifdef CONFIG_P2010RDB #define CONFIG_P2010 +#define CONFIG_SYS_L2_SIZE (512 << 10) #endif #ifdef CONFIG_P2020RDB #define CONFIG_P2020 -#endif - -#ifdef CONFIG_NAND -#define CONFIG_NAND_U_BOOT 1 -#define CONFIG_RAMBOOT_NAND 1 -#ifdef CONFIG_NAND_SPL -#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000 -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */ -#else -#define CONFIG_SYS_LDSCRIPT $(CPUDIR)/u-boot-nand.lds -#define CONFIG_SYS_TEXT_BASE 0xf8f82000 -#endif /* CONFIG_NAND_SPL */ +#define CONFIG_SYS_L2_SIZE (512 << 10) #endif #ifdef CONFIG_SDCARD -#define CONFIG_RAMBOOT_SDCARD 1 -#define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc +#define CONFIG_SPL +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SPL_MMC_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_PAD_TO 0x20000 +#define CONFIG_SPL_MAX_SIZE (128 * 1024) +#define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) +#define CONFIG_SYS_MMC_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_MMC_U_BOOT_START (0x11000000) +#define CONFIG_SYS_MMC_U_BOOT_OFFS (129 << 10) +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" +#define CONFIG_SPL_MMC_BOOT +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_COMMON_INIT_DDR +#endif #endif #ifdef CONFIG_SPIFLASH -#define CONFIG_RAMBOOT_SPIFLASH 1 -#define CONFIG_SYS_TEXT_BASE 0x11000000 -#define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc +#define CONFIG_SPL +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_FLASH_MINIMAL +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_PAD_TO 0x20000 +#define CONFIG_SPL_MAX_SIZE (128 * 1024) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x11000000) +#define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (128 << 10) +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" +#define CONFIG_SPL_SPI_BOOT +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SPL_COMMON_INIT_DDR +#endif +#endif + +#ifdef CONFIG_NAND +#define CONFIG_SPL +#define CONFIG_TPL +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SPL_NAND_BOOT +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_NAND_INIT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_COMMON_INIT_DDR +#define CONFIG_SPL_MAX_SIZE (128 << 10) +#define CONFIG_SPL_TEXT_BASE 0xf8f81000 +#define CONFIG_SYS_MPC85XX_NO_RESETVEC +#define CONFIG_SYS_NAND_U_BOOT_SIZE (832 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_START (0x11000000) +#define CONFIG_SYS_NAND_U_BOOT_OFFS ((128 + 128) << 10) +#elif defined(CONFIG_SPL_BUILD) +#define CONFIG_SPL_INIT_MINIMAL +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_FLUSH_IMAGE +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_TEXT_BASE 0xff800000 +#define CONFIG_SPL_MAX_SIZE 4096 +#define CONFIG_SYS_NAND_U_BOOT_SIZE (128 << 10) +#define CONFIG_SYS_NAND_U_BOOT_DST 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_START 0xf8f80000 +#define CONFIG_SYS_NAND_U_BOOT_OFFS (128 << 10) +#endif /* not CONFIG_TPL_BUILD */ + +#define CONFIG_SPL_PAD_TO 0x20000 +#define CONFIG_TPL_PAD_TO 0x20000 +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SYS_TEXT_BASE 0x11001000 +#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" #endif #ifndef CONFIG_SYS_TEXT_BASE @@ -64,8 +144,12 @@ #endif #ifndef CONFIG_SYS_MONITOR_BASE +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #endif +#endif /* High Level Configuration Options */ #define CONFIG_BOOKE 1 /* BOOKE */ @@ -120,22 +204,45 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_MEMTEST_END 0x1fffffff #define CONFIG_PANIC_HANG /* do not reset board on panic */ - /* - * Config the L2 Cache as L2 SRAM - */ +/* + * Config the L2 Cache as L2 SRAM +*/ +#if defined(CONFIG_SPL_BUILD) +#if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8f80000ull +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024) +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024) +#define CONFIG_SPL_RELOC_STACK_SIZE (32 << 10) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024) +#if defined(CONFIG_P2020RDB) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (364 << 10) +#else +#define CONFIG_SPL_RELOC_MALLOC_SIZE (108 << 10) +#endif +#elif defined(CONFIG_NAND) +#ifdef CONFIG_TPL_BUILD +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 +#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE 0xf8f81000 +#define CONFIG_SPL_RELOC_STACK (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024) +#define CONFIG_SPL_RELOC_MALLOC_SIZE (48 << 10) +#define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024) #else +#define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 #define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR +#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) +#define CONFIG_SPL_RELOC_TEXT_BASE (CONFIG_SYS_INIT_L2_END - 0x2000) +#define CONFIG_SPL_RELOC_STACK ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) +#endif /* CONFIG_TPL_BUILD */ +#endif #endif -#define CONFIG_SYS_L2_SIZE (512 << 10) -#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE) - -#define CONFIG_SYS_CCSRBAR 0xffe00000 -#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR -#if defined(CONFIG_NAND_SPL) +#ifdef CONFIG_SPL_BUILD #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE #endif @@ -146,7 +253,15 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_MEM_INIT_VALUE 0xDeadBeef -#define CONFIG_SYS_SDRAM_SIZE 1024 /* DDR size on P1_P2 RDBs */ +#if defined(CONFIG_P1011RDB) || defined(CONFIG_P1020RDB) +/* + * P1020 and it's derivatives support max 32bit DDR width + * So Reduce available DDR size +*/ +#define CONFIG_SYS_SDRAM_SIZE 512 +#else +#define CONFIG_SYS_SDRAM_SIZE 1024 +#endif #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE @@ -201,14 +316,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ -#if defined(CONFIG_RAMBOOT_NAND) || defined(CONFIG_RAMBOOT_SDCARD) || \ - defined(CONFIG_RAMBOOT_SPIFLASH) -#define CONFIG_SYS_RAMBOOT -#define CONFIG_SYS_EXTRA_ENV_RELOC -#else -#undef CONFIG_SYS_RAMBOOT -#endif - #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_EMPTY_INFO @@ -241,21 +348,12 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_MONITOR_LEN (768 * 1024) #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc*/ -#ifndef CONFIG_NAND_SPL -#define CONFIG_SYS_NAND_BASE 0xffa00000 +#define CONFIG_SYS_NAND_BASE 0xff800000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull +#define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull #else #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE #endif -#else -#define CONFIG_SYS_NAND_BASE 0xfff00000 -#ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_NAND_BASE_PHYS 0xffff00000ull -#else -#define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE -#endif -#endif #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} @@ -264,15 +362,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (16 * 1024) -/* NAND boot: 4K NAND loader config */ -#define CONFIG_SYS_NAND_SPL_SIZE 0x1000 -#define CONFIG_SYS_NAND_U_BOOT_SIZE ((768 << 10) - 0x2000) -#define CONFIG_SYS_NAND_U_BOOT_DST (CONFIG_SYS_INIT_L2_ADDR) -#define CONFIG_SYS_NAND_U_BOOT_START (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE) -#define CONFIG_SYS_NAND_U_BOOT_OFFS (0) -#define CONFIG_SYS_NAND_U_BOOT_RELOC (CONFIG_SYS_INIT_L2_END - 0x2000) -#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF) - /* NAND flash config */ #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ @@ -288,7 +377,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); | OR_FCM_TRLX \ | OR_FCM_EHTR) -#ifdef CONFIG_RAMBOOT_NAND +#ifdef CONFIG_NAND #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ @@ -323,7 +412,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) -#ifdef CONFIG_NAND_SPL +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL) #define CONFIG_NS16550_MIN_FUNCTIONS #endif @@ -490,33 +579,45 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* * Environment */ -#if defined(CONFIG_SYS_RAMBOOT) -#if defined(CONFIG_RAMBOOT_NAND) - #define CONFIG_ENV_IS_IN_NAND 1 - #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE - #define CONFIG_ENV_OFFSET ((768*1024)+CONFIG_SYS_NAND_BLOCK_SIZE) -#elif defined(CONFIG_RAMBOOT_SDCARD) +#ifdef CONFIG_SPIFLASH +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) +#elif defined(CONFIG_SDCARD) #define CONFIG_ENV_IS_IN_MMC #define CONFIG_FSL_FIXED_MMC_LOCATION -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_SYS_MMC_ENV_DEV 0 -#elif defined(CONFIG_RAMBOOT_SPIFLASH) - #define CONFIG_ENV_IS_IN_SPI_FLASH - #define CONFIG_ENV_SPI_BUS 0 - #define CONFIG_ENV_SPI_CS 0 - #define CONFIG_ENV_SPI_MAX_HZ 10000000 - #define CONFIG_ENV_SPI_MODE 0 - #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ - #define CONFIG_ENV_SECT_SIZE 0x10000 - #define CONFIG_ENV_SIZE 0x2000 -#endif +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_OFFSET (512 * 0x800) +#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) +#elif defined(CONFIG_NAND) +#ifdef CONFIG_TPL_BUILD +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_INIT_L2_ADDR + (160 << 10)) #else - #define CONFIG_ENV_IS_IN_FLASH 1 - #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) - #define CONFIG_ENV_SIZE 0x2000 - #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#endif +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET (1024 * 1024) +#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE) +#elif defined(CONFIG_SYS_RAMBOOT) +#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) +#define CONFIG_ENV_SIZE 0x2000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ #endif + #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index 54e6493..16f7525 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -381,15 +381,15 @@ unsigned long get_board_sys_clk(unsigned long dummy); * for slave u-boot IMAGE instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull /* * for slave UCODE and ENV instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ @@ -713,8 +713,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); "ramdiskfile=p2041rdb/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=p2041rdb/p2041rdb.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" #define CONFIG_HDBOOT \ "setenv bootargs root=/dev/$bdev rw " \ diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 522653b..2215ac8 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -767,8 +767,7 @@ unsigned long get_board_ddr_clk(void); "ramdiskfile=t1040qds/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=t1040qds/t1040qds.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" #define CONFIG_LINUX \ "setenv bootargs root=/dev/ram rw " \ diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 81b4f31..e564cb7 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -779,8 +779,7 @@ "ramdiskfile=" __stringify(RAMDISKFILE) "\0" \ "fdtaddr=c00000\0" \ "fdtfile=" __stringify(FDTFILE) "\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" #define CONFIG_LINUX \ "setenv bootargs root=/dev/ram rw " \ diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index 8bf0843..8dd2e49 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -505,15 +505,15 @@ unsigned long get_board_ddr_clk(void); * for slave u-boot IMAGE instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull /* * for slave UCODE and ENV instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ @@ -837,8 +837,7 @@ unsigned long get_board_ddr_clk(void); "ramdiskfile=t2080qds/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=t2080qds/t2080qds.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" /* * For emulation this causes u-boot to jump to the start of the diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index 73d82ed..3a1c49c 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -461,15 +461,15 @@ unsigned long get_board_ddr_clk(void); * for slave u-boot IMAGE instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull /* * for slave UCODE and ENV instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ @@ -721,6 +721,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA #define CONFIG_CMD_MII #define CONFIG_CMD_I2C #define CONFIG_CMD_PING @@ -750,7 +751,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ -#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks*/ /* * For booting Linux, the board info and command line data @@ -797,8 +797,7 @@ unsigned long get_board_ddr_clk(void); "ramdiskfile=t2080rdb/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=t2080rdb/t2080rdb.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" /* * For emulation this causes u-boot to jump to the start of the diff --git a/include/configs/T4240EMU.h b/include/configs/T4240EMU.h index ad5a9a6..53c69b0 100644 --- a/include/configs/T4240EMU.h +++ b/include/configs/T4240EMU.h @@ -128,8 +128,7 @@ "ramdiskfile=t4240emu/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=t4240emu/t4240emu.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" /* * For emulation this causes u-boot to jump to the start of the proof point diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index e4eb30f..a770dd0 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -375,15 +375,15 @@ unsigned long get_board_ddr_clk(void); * for slave u-boot IMAGE instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull /* * for slave UCODE and ENV instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ @@ -572,8 +572,7 @@ unsigned long get_board_ddr_clk(void); "ramdiskfile=t4240qds/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=t4240qds/t4240qds.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" #define CONFIG_HVBOOT \ "setenv bootargs config-addr=0x60000000; " \ diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h new file mode 100644 index 0000000..183255d --- /dev/null +++ b/include/configs/T4240RDB.h @@ -0,0 +1,756 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/* + * T4240 RDB board configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +#define CONFIG_T4240RDB +#define CONFIG_PHYS_64BIT + +#define CONFIG_FSL_SATA_V2 +#define CONFIG_PCIE4 + +#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ + +#ifdef CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_rcw.cfg +#endif + +#define CONFIG_DDR_ECC + +#define CONFIG_CMD_REGINFO + +/* High Level Configuration Options */ +#define CONFIG_BOOKE +#define CONFIG_E500 /* BOOKE e500 family */ +#define CONFIG_E500MC /* BOOKE e500mc family */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_MP /* support multiple processors */ + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xeff40000 +#endif + +#ifndef CONFIG_RESET_VECTOR_ADDRESS +#define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc +#endif + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS +#define CONFIG_FSL_IFC /* Enable IFC Support */ +#define CONFIG_PCI /* Enable PCI/PCIE */ +#define CONFIG_PCIE1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 /* PCIE controler 2 */ +#define CONFIG_PCIE3 /* PCIE controler 3 */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_FSL_LAW /* Use common FSL init code */ + +#define CONFIG_ENV_OVERWRITE + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BTB /* toggle branch predition */ +#ifdef CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#endif + +#define CONFIG_ENABLE_36BIT_PHYS + +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ + +#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00400000 +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_PANIC_HANG /* do not reset board on panic */ + +/* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE + +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE + +/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 4 +#define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE + +#define CONFIG_DDR_SPD +#define CONFIG_SYS_FSL_DDR3 + + +/* + * IFC Definitions + */ +#define CONFIG_SYS_FLASH_BASE 0xe0000000 +#define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) + + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE + +#define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ +#define CONFIG_MISC_INIT_R + +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe0ec000 +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +/* Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) + +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) + +/* Use the HUSH parser */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT +#define CONFIG_OF_BOARD_SETUP +#define CONFIG_OF_STDOUT_VIA_ALIAS + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ + +/* I2C */ +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_FSL +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 +#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* controller 2, Slot 2, tgtid 2, Base address 201000 */ +#define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +/* controller 4, Base address 203000 */ +#define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull +#define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull +#define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ + +#ifdef CONFIG_PCI +#define CONFIG_PCI_INDIRECT_BRIDGE +#define CONFIG_NET_MULTI +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_E1000 + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CONFIG_DOS_PARTITION +#endif /* CONFIG_PCI */ + +/* SATA */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* + * Environment + */ +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_ELF +#define CONFIG_CMD_ERRATA +#define CONFIG_CMD_GREPENV +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_I2C +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_PCI +#define CONFIG_CMD_PCI +#define CONFIG_CMD_NET +#endif + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#endif + +/* + * Environment Configuration + */ +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_BOOTFILE "uImage" +#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ + +/* default location for tftp and bootm */ +#define CONFIG_LOADADDR 1000000 + + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#ifdef CONFIG_SYS_NO_FLASH +#ifndef CONFIG_RAMBOOT_PBL +#define CONFIG_ENV_IS_NOWHERE +#endif +#else +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#endif + +#if defined(CONFIG_SPIFLASH) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_BUS 0 +#define CONFIG_ENV_SPI_CS 0 +#define CONFIG_ENV_SPI_MAX_HZ 10000000 +#define CONFIG_ENV_SPI_MODE 0 +#define CONFIG_ENV_SIZE 0x2000 /* 8KB */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ +#define CONFIG_ENV_SECT_SIZE 0x10000 +#elif defined(CONFIG_SDCARD) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_MMC +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_OFFSET (512 * 1658) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_EXTRA_ENV_RELOC +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE +#define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) +#elif defined(CONFIG_ENV_IS_NOWHERE) +#define CONFIG_ENV_SIZE 0x2000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ +#endif + +#define CONFIG_SYS_CLK_FREQ 66666666 +#define CONFIG_DDR_CLK_FREQ 133333333 + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(void); +unsigned long get_board_ddr_clk(void); +#endif + +/* + * DDR Setup + */ +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS1 0x52 +#define SPD_EEPROM_ADDRESS2 0x54 +#define SPD_EEPROM_ADDRESS3 0x56 +#define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +/* + * IFC Definitions + */ +#define CONFIG_SYS_NOR0_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR1_CSPR_EXT (0xf) +#define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ + CSPR_PORT_SIZE_16 | \ + CSPR_MSEL_NOR | \ + CSPR_V) +#define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) +/* NOR Flash Timing Params */ +#define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 + +#define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ + FTIM0_NOR_TEADC(0x5) | \ + FTIM0_NOR_TEAHC(0x5)) +#define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ + FTIM1_NOR_TRAD_NOR(0x1A) |\ + FTIM1_NOR_TSEQRAD_NOR(0x13)) +#define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ + FTIM2_NOR_TCH(0x4) | \ + FTIM2_NOR_TWPH(0x0E) | \ + FTIM2_NOR_TWP(0x1c)) +#define CONFIG_SYS_NOR_FTIM3 0x0 + +#define CONFIG_SYS_FLASH_QUIET_TEST +#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ + +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ + +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ + + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} + +/* NAND Flash on IFC */ +#define CONFIG_NAND_FSL_IFC +#define CONFIG_SYS_NAND_MAX_ECCPOS 256 +#define CONFIG_SYS_NAND_MAX_OOBFREE 2 +#define CONFIG_SYS_NAND_BASE 0xff800000 +#define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) + +#define CONFIG_SYS_NAND_CSPR_EXT (0xf) +#define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ + | CSPR_MSEL_NAND /* MSEL = NAND */ \ + | CSPR_V) +#define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) + +#define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ + | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ + | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ + | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ + | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ + | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ + | CSOR_NAND_PB(128)) /*Page Per Block = 128*/ + +#define CONFIG_SYS_NAND_ONFI_DETECTION + +/* ONFI NAND Flash mode0 Timing Params */ +#define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ + FTIM0_NAND_TWP(0x18) | \ + FTIM0_NAND_TWCHT(0x07) | \ + FTIM0_NAND_TWH(0x0a)) +#define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ + FTIM1_NAND_TWBE(0x39) | \ + FTIM1_NAND_TRR(0x0e) | \ + FTIM1_NAND_TRP(0x18)) +#define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ + FTIM2_NAND_TREH(0x0a) | \ + FTIM2_NAND_TWHRE(0x1e)) +#define CONFIG_SYS_NAND_FTIM3 0x0 + +#define CONFIG_SYS_NAND_DDR_LAW 11 +#define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_MTD_NAND_VERIFY_WRITE +#define CONFIG_CMD_NAND + +#define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) + +#if defined(CONFIG_NAND) +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 +#else +#define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT +#define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR +#define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 +#define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT +#define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR +#define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK +#define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR +#define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 +#define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 +#define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 +#define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 +#endif +#define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT +#define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR +#define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK +#define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR +#define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 +#define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 +#define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 +#define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 + +#if defined(CONFIG_RAMBOOT_PBL) +#define CONFIG_SYS_RAMBOOT +#endif + + +/* I2C */ +#define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ +#define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ +#define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ +#define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ + +#define I2C_MUX_CH_DEFAULT 0x8 +#define I2C_MUX_CH_VOL_MONITOR 0xa +#define I2C_MUX_CH_VSC3316_FS 0xc +#define I2C_MUX_CH_VSC3316_BS 0xd + +/* Voltage monitor on channel 2*/ +#define I2C_VOL_MONITOR_ADDR 0x40 +#define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 +#define I2C_VOL_MONITOR_BUS_V_OVF 0x1 +#define I2C_VOL_MONITOR_BUS_V_SHIFT 3 + +/* + * eSPI - Enhanced SPI + */ +#define CONFIG_FSL_ESPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_SST +#define CONFIG_CMD_SF +#define CONFIG_SF_DEFAULT_SPEED 10000000 +#define CONFIG_SF_DEFAULT_MODE 0 + + +/* Qman/Bman */ +#ifndef CONFIG_NOBQFMAN +#define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 50 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 +#define CONFIG_SYS_QMAN_NUM_PORTALS 50 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +#define CONFIG_SYS_PMAN +#define CONFIG_SYS_DPAA_DCE +#define CONFIG_SYS_DPAA_RMAN +#define CONFIG_SYS_INTERLAKEN + +/* Default address of microcode for the Linux Fman driver */ +#if defined(CONFIG_SPIFLASH) +/* + * env is stored at 0x100000, sector size is 0x10000, ucode is stored after + * env, so we got 0x110000. + */ +#define CONFIG_SYS_QE_FW_IN_SPIFLASH +#define CONFIG_SYS_FMAN_FW_ADDR 0x110000 +#elif defined(CONFIG_SDCARD) +/* + * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is + * about 825KB (1650 blocks), Env is stored after the image, and the env size is + * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680. + */ +#define CONFIG_SYS_QE_FMAN_FW_IN_MMC +#define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680) +#elif defined(CONFIG_NAND) +#define CONFIG_SYS_QE_FMAN_FW_IN_NAND +#define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) +#else +#define CONFIG_SYS_QE_FMAN_FW_IN_NOR +#define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 +#endif +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) +#endif /* CONFIG_NOBQFMAN */ + +#ifdef CONFIG_SYS_DPAA_FMAN +#define CONFIG_FMAN_ENET +#define CONFIG_PHYLIB_10G +#define CONFIG_PHY_VITESSE +#define CONFIG_PHY_CORTINA +#define CONFIG_CORTINA_FW_ADDR 0xefe00000 +#define CONFIG_CORTINA_FW_LENGTH 0x40000 +#define CONFIG_PHY_TERANETICS +#define SGMII_PHY_ADDR1 0x0 +#define SGMII_PHY_ADDR2 0x1 +#define SGMII_PHY_ADDR3 0x2 +#define SGMII_PHY_ADDR4 0x3 +#define SGMII_PHY_ADDR5 0x4 +#define SGMII_PHY_ADDR6 0x5 +#define SGMII_PHY_ADDR7 0x6 +#define SGMII_PHY_ADDR8 0x7 +#define FM1_10GEC1_PHY_ADDR 0x10 +#define FM1_10GEC2_PHY_ADDR 0x11 +#define FM2_10GEC1_PHY_ADDR 0x12 +#define FM2_10GEC2_PHY_ADDR 0x13 +#define CORTINA_PHY_ADDR1 FM1_10GEC1_PHY_ADDR +#define CORTINA_PHY_ADDR2 FM1_10GEC2_PHY_ADDR +#define CORTINA_PHY_ADDR3 FM2_10GEC1_PHY_ADDR +#define CORTINA_PHY_ADDR4 FM2_10GEC2_PHY_ADDR +#endif + + +/* SATA */ +#ifdef CONFIG_FSL_SATA_V2 +#define CONFIG_LIBATA +#define CONFIG_FSL_SATA + +#define CONFIG_SYS_SATA_MAX_DEVICE 2 +#define CONFIG_SATA1 +#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR +#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA +#define CONFIG_SATA2 +#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR +#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA + +#define CONFIG_LBA48 +#define CONFIG_CMD_SATA +#define CONFIG_DOS_PARTITION +#define CONFIG_CMD_EXT2 +#endif + +#ifdef CONFIG_FMAN_ENET +#define CONFIG_MII /* MII PHY management */ +#define CONFIG_ETHPRIME "FM1@DTSEC1" +#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ +#endif + +/* +* USB +*/ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#define CONFIG_HAS_FSL_DR_USB + +#define CONFIG_MMC + +#ifdef CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR +#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION +#endif + +#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ + +#define __USB_PHY_TYPE utmi + +/* + * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be + * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way + * interleaving. It can be cacheline, page, bank, superbank. + * See doc/README.fsl-ddr for details. + */ +#ifdef CONFIG_PPC_T4240 +#define CTRL_INTLV_PREFERED 3way_4KB +#else +#define CTRL_INTLV_PREFERED cacheline +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:" \ + "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ + "bank_intlv=auto;" \ + "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ + "netdev=eth0\0" \ + "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ + "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ + "tftpflash=tftpboot $loadaddr $uboot && " \ + "protect off $ubootaddr +$filesize && " \ + "erase $ubootaddr +$filesize && " \ + "cp.b $loadaddr $ubootaddr $filesize && " \ + "protect on $ubootaddr +$filesize && " \ + "cmp.b $loadaddr $ubootaddr $filesize\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=t4240rdb/ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=t4240rdb/t4240rdb.dtb\0" \ + "bdev=sda3\0" + +#define CONFIG_HVBOOT \ + "setenv bootargs config-addr=0x60000000; " \ + "bootm 0x01000000 - 0x00f00000" + +#define CONFIG_LINUX \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "setenv ramdiskaddr 0x02000000;" \ + "setenv fdtaddr 0x00c00000;" \ + "setenv loadaddr 0x1000000;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_HDBOOT \ + "setenv bootargs root=/dev/$bdev rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_LINUX + +#include <asm/fsl_secure_boot.h> + +#ifdef CONFIG_SECURE_BOOT +/* Secure Boot target was not getting build for T4240 because of + * increased binary size. So the size is being reduced by removing USB + * which is anyways not used in Secure Environment. + */ +#undef CONFIG_CMD_USB +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/bct-brettl2.h b/include/configs/bct-brettl2.h index 06f095c..c1eda96 100644 --- a/include/configs/bct-brettl2.h +++ b/include/configs/bct-brettl2.h @@ -75,6 +75,7 @@ #define CONFIG_ROOTPATH "/romfs/brettl2" /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ +#define CONFIG_LIB_RAND #endif diff --git a/include/configs/bf518f-ezbrd.h b/include/configs/bf518f-ezbrd.h index 9eb85eb..9e374c4 100644 --- a/include/configs/bf518f-ezbrd.h +++ b/include/configs/bf518f-ezbrd.h @@ -89,7 +89,7 @@ #define CONFIG_PHY_ADDR 3 /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/bf526-ezbrd.h b/include/configs/bf526-ezbrd.h index 3065d22..972eca9 100644 --- a/include/configs/bf526-ezbrd.h +++ b/include/configs/bf526-ezbrd.h @@ -87,7 +87,7 @@ #define CONFIG_HOSTNAME bf526-ezbrd /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/bf527-ezkit.h b/include/configs/bf527-ezkit.h index 748ddb3..92c183e 100644 --- a/include/configs/bf527-ezkit.h +++ b/include/configs/bf527-ezkit.h @@ -85,7 +85,7 @@ #define CONFIG_HOSTNAME bf527-ezkit /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/bf537-minotaur.h b/include/configs/bf537-minotaur.h index 156eeab..3bc364c 100644 --- a/include/configs/bf537-minotaur.h +++ b/include/configs/bf537-minotaur.h @@ -89,6 +89,7 @@ /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:42 */ +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/bf537-pnav.h b/include/configs/bf537-pnav.h index 3aa3d50..ba74a69 100644 --- a/include/configs/bf537-pnav.h +++ b/include/configs/bf537-pnav.h @@ -67,7 +67,7 @@ #define CONFIG_HOSTNAME bf537-pnav /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:24:21:18 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/bf537-srv1.h b/include/configs/bf537-srv1.h index e12d761..0b723cf 100644 --- a/include/configs/bf537-srv1.h +++ b/include/configs/bf537-srv1.h @@ -88,7 +88,7 @@ #define CONFIG_ROOTPATH "/romfs" /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:42 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/bf537-stamp.h b/include/configs/bf537-stamp.h index e1705ca..a302f83 100644 --- a/include/configs/bf537-stamp.h +++ b/include/configs/bf537-stamp.h @@ -67,7 +67,7 @@ #define CONFIG_HOSTNAME bf537-stamp /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/cm-bf527.h b/include/configs/cm-bf527.h index 384d871..8d3ae49 100644 --- a/include/configs/cm-bf527.h +++ b/include/configs/cm-bf527.h @@ -85,7 +85,7 @@ #define CONFIG_HOSTNAME cm-bf527 /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/cm-bf537e.h b/include/configs/cm-bf537e.h index 67cf801..47967d7 100644 --- a/include/configs/cm-bf537e.h +++ b/include/configs/cm-bf537e.h @@ -73,7 +73,7 @@ #define CONFIG_HOSTNAME cm-bf537e /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/cm-bf537u.h b/include/configs/cm-bf537u.h index 34ce75b..88c9982 100644 --- a/include/configs/cm-bf537u.h +++ b/include/configs/cm-bf537u.h @@ -71,7 +71,7 @@ #define CONFIG_HOSTNAME cm-bf537u /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index db6b9be..12b3296 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -10,6 +10,9 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + #include "../board/freescale/common/ics307_clk.h" #ifdef CONFIG_RAMBOOT_PBL @@ -376,15 +379,15 @@ * for slave u-boot IMAGE instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000 /* 512K */ -#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ +#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull /* * for slave UCODE and ENV instored in master memory space, * PHYS must be aligned based on the SIZE */ -#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull +#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ @@ -712,8 +715,7 @@ "ramdiskfile=p4080ds/ramdisk.uboot\0" \ "fdtaddr=c00000\0" \ "fdtfile=p4080ds/p4080ds.dtb\0" \ - "bdev=sda3\0" \ - "c=ffe\0" + "bdev=sda3\0" #define CONFIG_HDBOOT \ "setenv bootargs root=/dev/$bdev rw " \ diff --git a/include/configs/dnp5370.h b/include/configs/dnp5370.h index 4f2c742..3f1f9f3 100644 --- a/include/configs/dnp5370.h +++ b/include/configs/dnp5370.h @@ -55,6 +55,8 @@ #define CONFIG_CMD_MII #define CONFIG_CMD_PING + +#define CONFIG_LIB_RAND #endif /* diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 613f7e1..c1b3b63 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -474,7 +474,6 @@ #define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo" #define CONFIG_BAUDRATE 115200 -#define CONFIG_SYS_HZ 1000 /* Initial Memory map for Linux*/ #define CONFIG_SYS_BOOTMAPSZ (256 << 20) diff --git a/include/configs/ip04.h b/include/configs/ip04.h index 0efa2b7..3767502 100644 --- a/include/configs/ip04.h +++ b/include/configs/ip04.h @@ -77,6 +77,7 @@ #define DM9000_IO CONFIG_DM9000_BASE #define DM9000_DATA (CONFIG_DM9000_BASE + 2) +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 418e3d1..efd9635 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -85,11 +85,7 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_ADDR_MAP #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ -#define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00800000 -#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_PANIC_HANG /* do not reset board on panic */ +#define CONFIG_POST CONFIG_SYS_POST_MEM_REGIONS /* POST memory regions test */ /* * Config the L3 Cache as L3 SRAM @@ -143,10 +139,12 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_KM_PNVRAM 0x80000 /* physical RAM MTD size [hex] */ #define CONFIG_KM_PHRAM 0x100000 -/* resereved pram area at the end of memroy [hex] */ -#define CONFIG_KM_RESERVED_PRAM 0x0 -/* enable protected RAM */ -#define CONFIG_PRAM 0 +/* reserved pram area at the end of memory [hex] + * u-boot reserves some memory for the MP boot page */ +#define CONFIG_KM_RESERVED_PRAM 0x1000 +/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable + * is not valid yet, which is the case for when u-boot copies itself to RAM */ +#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10) #define CONFIG_KM_CRAMFS_ADDR 0x2000000 #define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */ @@ -383,6 +381,7 @@ int get_scl(void); */ #define CONFIG_CMD_PCI #define CONFIG_CMD_NET +#define CONFIG_CMD_ERRATA /* we don't need flash support */ #define CONFIG_SYS_NO_FLASH diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index e745945..185df77 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -10,6 +10,9 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO + #ifdef CONFIG_36BIT #define CONFIG_PHYS_64BIT #endif @@ -883,6 +886,10 @@ #endif #endif +#if defined(CONFIG_P1020RDB_PD) +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 +#endif + #define CONFIG_MMC #ifdef CONFIG_MMC diff --git a/include/configs/qemu-ppce500.h b/include/configs/qemu-ppce500.h index 10e014d..763a47a 100644 --- a/include/configs/qemu-ppce500.h +++ b/include/configs/qemu-ppce500.h @@ -19,6 +19,7 @@ #undef CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_TEXT_BASE 0xf01000 /* 15 MB */ +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_MPC85XX_NO_RESETVEC diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index 91cc7d8..41c946d 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -17,7 +17,6 @@ /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ -#define CONFIG_SYS_HZ 1000 #define CONFIG_AT91FAMILY #define CONFIG_ARCH_CPU_INIT diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index fa62cb6..6bb2546 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -140,8 +140,6 @@ #define CONFIG_CROS_EC #define CONFIG_CMD_CROS_EC #define CONFIG_CROS_EC_SANDBOX -#define CONFIG_KEYBOARD -#define CONFIG_CROS_EC_KEYB #define CONFIG_ARCH_EARLY_INIT_R #define CONFIG_BOARD_LATE_INIT @@ -149,7 +147,12 @@ #define CONFIG_SOUND_SANDBOX #define CONFIG_CMD_SOUND +#ifndef SANDBOX_NO_SDL #define CONFIG_SANDBOX_SDL +#endif + +/* LCD and keyboard require SDL support */ +#ifdef CONFIG_SANDBOX_SDL #define CONFIG_LCD #define CONFIG_VIDEO_SANDBOX_SDL #define CONFIG_CMD_BMP @@ -158,9 +161,18 @@ #define CONFIG_SYS_CONSOLE_IS_IN_ENV #define LCD_BPP LCD_COLOR16 +#define CONFIG_CROS_EC_KEYB +#define CONFIG_KEYBOARD + #define CONFIG_EXTRA_ENV_SETTINGS "stdin=serial,cros-ec-keyb\0" \ "stdout=serial,lcd\0" \ "stderr=serial,lcd\0" +#else + +#define CONFIG_EXTRA_ENV_SETTINGS "stdin=serial\0" \ + "stdout=serial,lcd\0" \ + "stderr=serial,lcd\0" +#endif #define CONFIG_GZIP_COMPRESSED #define CONFIG_BZIP2 diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h index 36bc529..75609b9 100644 --- a/include/configs/t4qds.h +++ b/include/configs/t4qds.h @@ -10,6 +10,8 @@ #ifndef __T4QDS_H #define __T4QDS_H +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_BOARDINFO #define CONFIG_CMD_REGINFO /* High Level Configuration Options */ diff --git a/include/configs/tcm-bf518.h b/include/configs/tcm-bf518.h index 1ff34d5..a77ba69 100644 --- a/include/configs/tcm-bf518.h +++ b/include/configs/tcm-bf518.h @@ -68,7 +68,7 @@ #define CONFIG_HOSTNAME tcm-bf518 /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/configs/tcm-bf537.h b/include/configs/tcm-bf537.h index 370d97f..c4c1c57 100644 --- a/include/configs/tcm-bf537.h +++ b/include/configs/tcm-bf537.h @@ -73,7 +73,7 @@ #define CONFIG_HOSTNAME tcm-bf537 /* Uncomment next line to use fixed MAC address */ /* #define CONFIG_ETHADDR 02:80:ad:20:31:e8 */ - +#define CONFIG_LIB_RAND /* * Flash Settings diff --git a/include/ext4fs.h b/include/ext4fs.h index aacb147..fbbb002 100644 --- a/include/ext4fs.h +++ b/include/ext4fs.h @@ -133,6 +133,7 @@ int ext4fs_open(const char *filename); int ext4fs_read(char *buf, unsigned len); int ext4fs_mount(unsigned part_length); void ext4fs_close(void); +void ext4fs_reinit_global(void); int ext4fs_ls(const char *dirname); int ext4fs_exists(const char *filename); void ext4fs_free_node(struct ext2fs_node *node, struct ext2fs_node *currroot); diff --git a/include/fat.h b/include/fat.h index c8eb7cc..81d9790 100644 --- a/include/fat.h +++ b/include/fat.h @@ -84,8 +84,13 @@ #define START(dent) (FAT2CPU16((dent)->start) \ + (mydata->fatsize != 32 ? 0 : \ (FAT2CPU16((dent)->starthi) << 16))) +#define IS_LAST_CLUST(x, fatsize) ((x) >= ((fatsize) != 32 ? \ + ((fatsize) != 16 ? 0xff8 : 0xfff8) : \ + 0xffffff8)) #define CHECK_CLUST(x, fatsize) ((x) <= 1 || \ - (x) >= ((fatsize) != 32 ? 0xfff0 : 0xffffff0)) + (x) >= ((fatsize) != 32 ? \ + ((fatsize) != 16 ? 0xff0 : 0xfff0) : \ + 0xffffff0)) typedef struct boot_sector { __u8 ignored[3]; /* Bootstrap code */ diff --git a/include/net.h b/include/net.h index 0802fad..735b0b9 100644 --- a/include/net.h +++ b/include/net.h @@ -130,23 +130,6 @@ extern int eth_setenv_enetaddr(char *name, const uchar *enetaddr); extern int eth_getenv_enetaddr_by_index(const char *base_name, int index, uchar *enetaddr); -#ifdef CONFIG_RANDOM_MACADDR -/* - * The u-boot policy does not allow hardcoded ethernet addresses. Under the - * following circumstances a random generated address is allowed: - * - in emergency cases, where you need a working network connection to set - * the ethernet address. - * Eg. you want a rescue boot and don't have a serial port to access the - * CLI to set environment variables. - * - * In these cases, we generate a random locally administered ethernet address. - * - * Args: - * enetaddr - returns 6 byte hardware address - */ -extern void eth_random_enetaddr(uchar *enetaddr); -#endif - extern int usb_eth_initialize(bd_t *bi); extern int eth_init(bd_t *bis); /* Initialize the device */ extern int eth_send(void *packet, int length); /* Send a packet */ @@ -674,6 +657,25 @@ static inline int is_valid_ether_addr(const u8 *addr) return !is_multicast_ether_addr(addr) && !is_zero_ether_addr(addr); } +/** + * eth_random_addr - Generate software assigned random Ethernet address + * @addr: Pointer to a six-byte array containing the Ethernet address + * + * Generate a random Ethernet address (MAC) that is not multicast + * and has the local assigned bit set. + */ +static inline void eth_random_addr(uchar *addr) +{ + int i; + unsigned int seed = get_timer(0); + + for (i = 0; i < 6; i++) + addr[i] = rand_r(&seed); + + addr[0] &= 0xfe; /* clear multicast bit */ + addr[0] |= 0x02; /* set local assignment bit (IEEE802) */ +} + /* Convert an IP address to a string */ extern void ip_to_string(IPaddr_t x, char *s); diff --git a/include/ns16550.h b/include/ns16550.h index 51cb5b4..17f829f 100644 --- a/include/ns16550.h +++ b/include/ns16550.h @@ -100,6 +100,7 @@ typedef struct NS16550 *NS16550_t; #define UART_MCR_OUT1 0x04 /* Out 1 */ #define UART_MCR_OUT2 0x08 /* Out 2 */ #define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ +#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS */ #define UART_MCR_DMA_EN 0x04 #define UART_MCR_TX_DFR 0x08 diff --git a/include/spartan2.h b/include/spartan2.h index 087a27d..2aca954 100644 --- a/include/spartan2.h +++ b/include/spartan2.h @@ -10,37 +10,35 @@ #include <xilinx.h> -extern int Spartan2_load(Xilinx_desc *desc, const void *image, size_t size); -extern int Spartan2_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -extern int Spartan2_info(Xilinx_desc *desc); - /* Slave Parallel Implementation function table */ typedef struct { - Xilinx_pre_fn pre; - Xilinx_pgm_fn pgm; - Xilinx_init_fn init; - Xilinx_err_fn err; - Xilinx_done_fn done; - Xilinx_clk_fn clk; - Xilinx_cs_fn cs; - Xilinx_wr_fn wr; - Xilinx_rdata_fn rdata; - Xilinx_wdata_fn wdata; - Xilinx_busy_fn busy; - Xilinx_abort_fn abort; - Xilinx_post_fn post; -} Xilinx_Spartan2_Slave_Parallel_fns; + xilinx_pre_fn pre; + xilinx_pgm_fn pgm; + xilinx_init_fn init; + xilinx_err_fn err; + xilinx_done_fn done; + xilinx_clk_fn clk; + xilinx_cs_fn cs; + xilinx_wr_fn wr; + xilinx_rdata_fn rdata; + xilinx_wdata_fn wdata; + xilinx_busy_fn busy; + xilinx_abort_fn abort; + xilinx_post_fn post; +} xilinx_spartan2_slave_parallel_fns; /* Slave Serial Implementation function table */ typedef struct { - Xilinx_pre_fn pre; - Xilinx_pgm_fn pgm; - Xilinx_clk_fn clk; - Xilinx_init_fn init; - Xilinx_done_fn done; - Xilinx_wr_fn wr; - Xilinx_post_fn post; -} Xilinx_Spartan2_Slave_Serial_fns; + xilinx_pre_fn pre; + xilinx_pgm_fn pgm; + xilinx_clk_fn clk; + xilinx_init_fn init; + xilinx_done_fn done; + xilinx_wr_fn wr; + xilinx_post_fn post; +} xilinx_spartan2_slave_serial_fns; + +extern struct xilinx_fpga_op spartan2_op; /* Device Image Sizes *********************************************************************/ @@ -63,36 +61,36 @@ typedef struct { *********************************************************************/ /* Spartan-II devices */ #define XILINX_XC2S15_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S15_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S15_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S30_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S30_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S30_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S50_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S50_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S50_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S100_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S100_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S100_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S150_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S150_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S150_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S200_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S200_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S200_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S50E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S50E_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S50E_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S100E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S100E_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S100E_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S150E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S150E_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S150E_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S200E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S200E_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S200E_SIZE, fn_table, cookie, &spartan2_op } #define XILINX_XC2S300E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan2, iface, XILINX_XC2S300E_SIZE, fn_table, cookie } +{ xilinx_spartan2, iface, XILINX_XC2S300E_SIZE, fn_table, cookie, &spartan2_op } #endif /* _SPARTAN2_H_ */ diff --git a/include/spartan3.h b/include/spartan3.h index 72e7c0d..d6d67a6 100644 --- a/include/spartan3.h +++ b/include/spartan3.h @@ -10,39 +10,37 @@ #include <xilinx.h> -extern int Spartan3_load(Xilinx_desc *desc, const void *image, size_t size); -extern int Spartan3_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -extern int Spartan3_info(Xilinx_desc *desc); - /* Slave Parallel Implementation function table */ typedef struct { - Xilinx_pre_fn pre; - Xilinx_pgm_fn pgm; - Xilinx_init_fn init; - Xilinx_err_fn err; - Xilinx_done_fn done; - Xilinx_clk_fn clk; - Xilinx_cs_fn cs; - Xilinx_wr_fn wr; - Xilinx_rdata_fn rdata; - Xilinx_wdata_fn wdata; - Xilinx_busy_fn busy; - Xilinx_abort_fn abort; - Xilinx_post_fn post; -} Xilinx_Spartan3_Slave_Parallel_fns; + xilinx_pre_fn pre; + xilinx_pgm_fn pgm; + xilinx_init_fn init; + xilinx_err_fn err; + xilinx_done_fn done; + xilinx_clk_fn clk; + xilinx_cs_fn cs; + xilinx_wr_fn wr; + xilinx_rdata_fn rdata; + xilinx_wdata_fn wdata; + xilinx_busy_fn busy; + xilinx_abort_fn abort; + xilinx_post_fn post; +} xilinx_spartan3_slave_parallel_fns; /* Slave Serial Implementation function table */ typedef struct { - Xilinx_pre_fn pre; - Xilinx_pgm_fn pgm; - Xilinx_clk_fn clk; - Xilinx_init_fn init; - Xilinx_done_fn done; - Xilinx_wr_fn wr; - Xilinx_post_fn post; - Xilinx_bwr_fn bwr; /* block write function */ - Xilinx_abort_fn abort; -} Xilinx_Spartan3_Slave_Serial_fns; + xilinx_pre_fn pre; + xilinx_pgm_fn pgm; + xilinx_clk_fn clk; + xilinx_init_fn init; + xilinx_done_fn done; + xilinx_wr_fn wr; + xilinx_post_fn post; + xilinx_bwr_fn bwr; /* block write function */ + xilinx_abort_fn abort; +} xilinx_spartan3_slave_serial_fns; + +extern struct xilinx_fpga_op spartan3_op; /* Device Image Sizes *********************************************************************/ @@ -73,46 +71,48 @@ typedef struct { *********************************************************************/ /* Spartan-III devices */ #define XILINX_XC3S50_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S50_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S50_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S200_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S200_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S200_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S400_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S400_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S400_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S1000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S1000_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S1000_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S1500_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S1500_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S1500_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S2000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S2000_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S2000_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S4000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S4000_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S4000_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S5000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S5000_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S5000_SIZE, fn_table, cookie, &spartan3_op } /* Spartan-3E devices */ #define XILINX_XC3S100E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S100E_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S100E_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S250E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S250E_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S250E_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S500E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S500E_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S500E_SIZE, fn_table, cookie, &spartan3_op } #define XILINX_XC3S1200E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S1200E_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S1200E_SIZE, fn_table, cookie, \ + &spartan3_op } #define XILINX_XC3S1600E_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINX_XC3S1600E_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINX_XC3S1600E_SIZE, fn_table, cookie, \ + &spartan3_op } #define XILINX_XC6SLX4_DESC(iface, fn_table, cookie) \ -{ Xilinx_Spartan3, iface, XILINK_XC6SLX4_SIZE, fn_table, cookie } +{ xilinx_spartan3, iface, XILINK_XC6SLX4_SIZE, fn_table, cookie, &spartan3_op } #endif /* _SPARTAN3_H_ */ diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h index c9ee1d5..dd77ad6 100644 --- a/include/usb/ehci-fsl.h +++ b/include/usb/ehci-fsl.h @@ -11,6 +11,8 @@ #include <asm/processor.h> +#define CONTROL_REGISTER_W1C_MASK 0x00020000 /* W1C: PHY_CLK_VALID */ + /* Global offsets */ #define FSL_SKIP_PCI 0x100 diff --git a/include/virtex2.h b/include/virtex2.h index 2e9a4f5..7b7825f 100644 --- a/include/virtex2.h +++ b/include/virtex2.h @@ -11,36 +11,34 @@ #include <xilinx.h> -extern int Virtex2_load(Xilinx_desc *desc, const void *image, size_t size); -extern int Virtex2_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -extern int Virtex2_info(Xilinx_desc *desc); +extern struct xilinx_fpga_op virtex2_op; /* * Slave SelectMap Implementation function table. */ typedef struct { - Xilinx_pre_fn pre; - Xilinx_pgm_fn pgm; - Xilinx_init_fn init; - Xilinx_err_fn err; - Xilinx_done_fn done; - Xilinx_clk_fn clk; - Xilinx_cs_fn cs; - Xilinx_wr_fn wr; - Xilinx_rdata_fn rdata; - Xilinx_wdata_fn wdata; - Xilinx_busy_fn busy; - Xilinx_abort_fn abort; - Xilinx_post_fn post; -} Xilinx_Virtex2_Slave_SelectMap_fns; + xilinx_pre_fn pre; + xilinx_pgm_fn pgm; + xilinx_init_fn init; + xilinx_err_fn err; + xilinx_done_fn done; + xilinx_clk_fn clk; + xilinx_cs_fn cs; + xilinx_wr_fn wr; + xilinx_rdata_fn rdata; + xilinx_wdata_fn wdata; + xilinx_busy_fn busy; + xilinx_abort_fn abort; + xilinx_post_fn post; +} xilinx_virtex2_slave_selectmap_fns; /* Slave Serial Implementation function table */ typedef struct { - Xilinx_pgm_fn pgm; - Xilinx_clk_fn clk; - Xilinx_rdata_fn rdata; - Xilinx_wdata_fn wdata; -} Xilinx_Virtex2_Slave_Serial_fns; + xilinx_pgm_fn pgm; + xilinx_clk_fn clk; + xilinx_rdata_fn rdata; + xilinx_wdata_fn wdata; +} xilinx_virtex2_slave_serial_fns; /* Device Image Sizes (in bytes) *********************************************************************/ @@ -60,39 +58,39 @@ typedef struct { /* Descriptor Macros *********************************************************************/ #define XILINX_XC2V40_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V40_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V40_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V80_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V80_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V80_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V250_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V250_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V250_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V500_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V500_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V500_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V1000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V1000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V1000_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V1500_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V1500_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V1500_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V2000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V2000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V2000_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V3000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V3000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V3000_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V4000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V4000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V4000_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V6000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V6000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V6000_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V8000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V8000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V8000_SIZE, fn_table, cookie, &virtex2_op } #define XILINX_XC2V10000_DESC(iface, fn_table, cookie) \ -{ Xilinx_Virtex2, iface, XILINX_XC2V10000_SIZE, fn_table, cookie } +{ xilinx_virtex2, iface, XILINX_XC2V10000_SIZE, fn_table, cookie, &virtex2_op } #endif /* _VIRTEX2_H_ */ diff --git a/include/xilinx.h b/include/xilinx.h index 00a585e..9801267 100644 --- a/include/xilinx.h +++ b/include/xilinx.h @@ -12,7 +12,7 @@ /* Xilinx types *********************************************************************/ -typedef enum { /* typedef Xilinx_iface */ +typedef enum { /* typedef xilinx_iface */ min_xilinx_iface_type, /* low range check value */ slave_serial, /* serial data and external clock */ master_serial, /* serial data w/ internal clock (not used) */ @@ -22,48 +22,55 @@ typedef enum { /* typedef Xilinx_iface */ slave_selectmap, /* slave SelectMap (virtex2) */ devcfg, /* devcfg interface (zynq) */ max_xilinx_iface_type /* insert all new types before this */ -} Xilinx_iface; /* end, typedef Xilinx_iface */ +} xilinx_iface; /* end, typedef xilinx_iface */ -typedef enum { /* typedef Xilinx_Family */ +typedef enum { /* typedef xilinx_family */ min_xilinx_type, /* low range check value */ - Xilinx_Spartan2, /* Spartan-II Family */ - Xilinx_VirtexE, /* Virtex-E Family */ - Xilinx_Virtex2, /* Virtex2 Family */ - Xilinx_Spartan3, /* Spartan-III Family */ + xilinx_spartan2, /* Spartan-II Family */ + xilinx_virtexE, /* Virtex-E Family */ + xilinx_virtex2, /* Virtex2 Family */ + xilinx_spartan3, /* Spartan-III Family */ xilinx_zynq, /* Zynq Family */ max_xilinx_type /* insert all new types before this */ -} Xilinx_Family; /* end, typedef Xilinx_Family */ +} xilinx_family; /* end, typedef xilinx_family */ -typedef struct { /* typedef Xilinx_desc */ - Xilinx_Family family; /* part type */ - Xilinx_iface iface; /* interface type */ +typedef struct { /* typedef xilinx_desc */ + xilinx_family family; /* part type */ + xilinx_iface iface; /* interface type */ size_t size; /* bytes of data part can accept */ void *iface_fns; /* interface function table */ int cookie; /* implementation specific cookie */ + struct xilinx_fpga_op *operations; /* operations */ char *name; /* device name in bitstream */ -} Xilinx_desc; /* end, typedef Xilinx_desc */ +} xilinx_desc; /* end, typedef xilinx_desc */ + +struct xilinx_fpga_op { + int (*load)(xilinx_desc *, const void *, size_t); + int (*dump)(xilinx_desc *, const void *, size_t); + int (*info)(xilinx_desc *); +}; /* Generic Xilinx Functions *********************************************************************/ -extern int xilinx_load(Xilinx_desc *desc, const void *image, size_t size); -extern int xilinx_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -extern int xilinx_info(Xilinx_desc *desc); +int xilinx_load(xilinx_desc *desc, const void *image, size_t size); +int xilinx_dump(xilinx_desc *desc, const void *buf, size_t bsize); +int xilinx_info(xilinx_desc *desc); /* Board specific implementation specific function types *********************************************************************/ -typedef int (*Xilinx_pgm_fn)( int assert_pgm, int flush, int cookie ); -typedef int (*Xilinx_init_fn)( int cookie ); -typedef int (*Xilinx_err_fn)( int cookie ); -typedef int (*Xilinx_done_fn)( int cookie ); -typedef int (*Xilinx_clk_fn)( int assert_clk, int flush, int cookie ); -typedef int (*Xilinx_cs_fn)( int assert_cs, int flush, int cookie ); -typedef int (*Xilinx_wr_fn)( int assert_write, int flush, int cookie ); -typedef int (*Xilinx_rdata_fn)( unsigned char *data, int cookie ); -typedef int (*Xilinx_wdata_fn)( unsigned char data, int flush, int cookie ); -typedef int (*Xilinx_busy_fn)( int cookie ); -typedef int (*Xilinx_abort_fn)( int cookie ); -typedef int (*Xilinx_pre_fn)( int cookie ); -typedef int (*Xilinx_post_fn)( int cookie ); -typedef int (*Xilinx_bwr_fn)( void *buf, size_t len, int flush, int cookie ); +typedef int (*xilinx_pgm_fn)(int assert_pgm, int flush, int cookie); +typedef int (*xilinx_init_fn)(int cookie); +typedef int (*xilinx_err_fn)(int cookie); +typedef int (*xilinx_done_fn)(int cookie); +typedef int (*xilinx_clk_fn)(int assert_clk, int flush, int cookie); +typedef int (*xilinx_cs_fn)(int assert_cs, int flush, int cookie); +typedef int (*xilinx_wr_fn)(int assert_write, int flush, int cookie); +typedef int (*xilinx_rdata_fn)(unsigned char *data, int cookie); +typedef int (*xilinx_wdata_fn)(unsigned char data, int flush, int cookie); +typedef int (*xilinx_busy_fn)(int cookie); +typedef int (*xilinx_abort_fn)(int cookie); +typedef int (*xilinx_pre_fn)(int cookie); +typedef int (*xilinx_post_fn)(int cookie); +typedef int (*xilinx_bwr_fn)(void *buf, size_t len, int flush, int cookie); #endif /* _XILINX_H_ */ diff --git a/include/zynqpl.h b/include/zynqpl.h index c81446e..8a9ec32 100644 --- a/include/zynqpl.h +++ b/include/zynqpl.h @@ -12,9 +12,7 @@ #include <xilinx.h> -extern int zynq_load(Xilinx_desc *desc, const void *image, size_t size); -extern int zynq_dump(Xilinx_desc *desc, const void *buf, size_t bsize); -extern int zynq_info(Xilinx_desc *desc); +extern struct xilinx_fpga_op zynq_op; #define XILINX_ZYNQ_7010 0x2 #define XILINX_ZYNQ_7015 0x1b @@ -33,21 +31,21 @@ extern int zynq_info(Xilinx_desc *desc); /* Descriptor Macros */ #define XILINX_XC7Z010_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z010_SIZE, NULL, cookie, "7z010" } +{ xilinx_zynq, devcfg, XILINX_XC7Z010_SIZE, NULL, cookie, &zynq_op, "7z010" } #define XILINX_XC7Z015_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z015_SIZE, NULL, cookie, "7z015" } +{ xilinx_zynq, devcfg, XILINX_XC7Z015_SIZE, NULL, cookie, &zynq_op, "7z015" } #define XILINX_XC7Z020_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z020_SIZE, NULL, cookie, "7z020" } +{ xilinx_zynq, devcfg, XILINX_XC7Z020_SIZE, NULL, cookie, &zynq_op, "7z020" } #define XILINX_XC7Z030_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z030_SIZE, NULL, cookie, "7z030" } +{ xilinx_zynq, devcfg, XILINX_XC7Z030_SIZE, NULL, cookie, &zynq_op, "7z030" } #define XILINX_XC7Z045_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z045_SIZE, NULL, cookie, "7z045" } +{ xilinx_zynq, devcfg, XILINX_XC7Z045_SIZE, NULL, cookie, &zynq_op, "7z045" } #define XILINX_XC7Z100_DESC(cookie) \ -{ xilinx_zynq, devcfg, XILINX_XC7Z100_SIZE, NULL, cookie, "7z100" } +{ xilinx_zynq, devcfg, XILINX_XC7Z100_SIZE, NULL, cookie, &zynq_op, "7z100" } #endif /* _ZYNQPL_H_ */ diff --git a/lib/sha256.c b/lib/sha256.c index 3212bab..b1085ea 100644 --- a/lib/sha256.c +++ b/lib/sha256.c @@ -8,9 +8,11 @@ #ifndef USE_HOSTCC #include <common.h> +#include <linux/string.h> +#else +#include <string.h> #endif /* USE_HOSTCC */ #include <watchdog.h> -#include <linux/string.h> #include <sha256.h> /* diff --git a/nand_spl/board/freescale/p1_p2_rdb/Makefile b/nand_spl/board/freescale/p1_p2_rdb/Makefile deleted file mode 100644 index 9f33802..0000000 --- a/nand_spl/board/freescale/p1_p2_rdb/Makefile +++ /dev/null @@ -1,91 +0,0 @@ -# -# (C) Copyright 2007 -# Stefan Roese, DENX Software Engineering, sr@denx.de. -# -# Copyright 2009-2011 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -CONFIG_SYS_TEXT_BASE_SPL := 0xfff00000 -PAD_TO := 0xfff01000 - -nandobj := $(objtree)/nand_spl/ - -LDSCRIPT= $(srctree)/$(CPUDIR)/u-boot-nand_spl.lds -LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \ - $(LDFLAGS) $(LDFLAGS_FINAL) -asflags-y += -DCONFIG_NAND_SPL -ccflags-y += -DCONFIG_NAND_SPL - -SOBJS = start.o resetvec.o -COBJS = cache.o cpu_init_early.o spl_minimal.o fsl_law.o law.o \ - nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o - -OBJS := $(addprefix $(obj)/,$(SOBJS) $(COBJS)) -__OBJS := $(SOBJS) $(COBJS) -LNDIR := $(nandobj)board/$(BOARDDIR) - -targets += $(__OBJS) - -all: $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin - -$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) --pad-to=$(PAD_TO) -O binary $< $@ - -$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl - $(OBJCOPY) $(OBJCOPYFLAGS) -O binary $< $@ - -$(nandobj)u-boot-spl: $(OBJS) $(nandobj)u-boot-nand_spl.lds - cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \ - -Map $(nandobj)u-boot-spl.map -o $@ - -$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) - $(CPP) $(cpp_flags) $(LDPPFLAGS) -I$(nandobj)/board/$(BOARDDIR) \ - -ansi -D__ASSEMBLY__ -P - <$< >$@ - -# create symbolic links for common files - -$(obj)/cache.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/lib/cache.c $@ - -$(obj)/cpu_init_early.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/cpu_init_early.c $@ - -$(obj)/spl_minimal.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/spl_minimal.c $@ - -$(obj)/fsl_law.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc8xxx/law.c $@ - -$(obj)/law.c: - @rm -f $@ - ln -sf $(srctree)/board/$(BOARDDIR)/law.c $@ - -$(obj)/nand_boot_fsl_elbc.c: - @rm -f $@ - ln -sf $(srctree)/nand_spl/nand_boot_fsl_elbc.c $@ - -$(obj)/ns16550.c: - @rm -f $@ - ln -sf $(srctree)/drivers/serial/ns16550.c $@ - -$(obj)/resetvec.S: - @rm -f $@ - ln -s $(srctree)/$(CPUDIR)/resetvec.S $@ - -$(obj)/start.S: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/start.S $@ - -$(obj)/tlb.c: - @rm -f $@ - ln -sf $(srctree)/arch/powerpc/cpu/mpc85xx/tlb.c $@ - -$(obj)/tlb_table.c: - @rm -f $@ - ln -sf $(srctree)/board/$(BOARDDIR)/tlb.c $@ diff --git a/nand_spl/board/freescale/p1_p2_rdb/nand_boot.c b/nand_spl/board/freescale/p1_p2_rdb/nand_boot.c deleted file mode 100644 index f7e8438..0000000 --- a/nand_spl/board/freescale/p1_p2_rdb/nand_boot.c +++ /dev/null @@ -1,82 +0,0 @@ -/* - * Copyright 2009 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <common.h> -#include <mpc85xx.h> -#include <asm/io.h> -#include <ns16550.h> -#include <nand.h> -#include <asm/mmu.h> -#include <asm/immap_85xx.h> -#include <fsl_ddr_sdram.h> -#include <asm/fsl_law.h> - -#define SYSCLK_MASK 0x00200000 -#define BOARDREV_MASK 0x10100000 -#define BOARDREV_B 0x10100000 -#define BOARDREV_C 0x00100000 - -#define SYSCLK_66 66666666 -#define SYSCLK_50 50000000 -#define SYSCLK_100 100000000 - -DECLARE_GLOBAL_DATA_PTR; - -void board_init_f(ulong bootflag) -{ - uint plat_ratio, bus_clk, sys_clk = 0; - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - volatile ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - uint val, temp, sysclk_mask; - - val = pgpio->gpdat; - sysclk_mask = val & SYSCLK_MASK; - temp = val & BOARDREV_MASK; - if (temp == BOARDREV_C) { - if(sysclk_mask == 0) - sys_clk = SYSCLK_66; - else - sys_clk = SYSCLK_100; - } else if (temp == BOARDREV_B) { - if(sysclk_mask == 0) - sys_clk = SYSCLK_66; - else - sys_clk = SYSCLK_50; - } - - plat_ratio = gur->porpllsr & 0x0000003e; - plat_ratio >>= 1; - bus_clk = plat_ratio * sys_clk; - NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1, - bus_clk / 16 / CONFIG_BAUDRATE); - - puts("\nNAND boot... "); - - /* copy code to DDR and jump to it - this should not return */ - /* NOTE - code has to be copied out of NAND buffer before - * other blocks can be read. - */ - relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0, - CONFIG_SYS_NAND_U_BOOT_RELOC); -} - -void board_init_r(gd_t *gd, ulong dest_addr) -{ - nand_boot(); -} - -void putc(char c) -{ - if (c == '\n') - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r'); - - NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c); -} - -void puts(const char *str) -{ - while (*str) - putc(*str++); -} @@ -63,28 +63,6 @@ static int eth_mac_skip(int index) return ((skip_state = getenv(enetvar)) != NULL); } -#ifdef CONFIG_RANDOM_MACADDR -void eth_random_enetaddr(uchar *enetaddr) -{ - uint32_t rval; - - srand(get_timer(0)); - - rval = rand(); - enetaddr[0] = rval & 0xff; - enetaddr[1] = (rval >> 8) & 0xff; - enetaddr[2] = (rval >> 16) & 0xff; - - rval = rand(); - enetaddr[3] = rval & 0xff; - enetaddr[4] = (rval >> 8) & 0xff; - enetaddr[5] = (rval >> 16) & 0xff; - - /* make sure it's local and unicast */ - enetaddr[0] = (enetaddr[0] | 0x02) & ~0x01; -} -#endif - /* * CPU and board-specific Ethernet initializations. Aliased function * signals caller to move on diff --git a/spl/Makefile b/spl/Makefile index a4d9737..55500fd 100644 --- a/spl/Makefile +++ b/spl/Makefile @@ -88,7 +88,7 @@ libs-y += $(CPUDIR)/ ifdef SOC libs-y += $(CPUDIR)/$(SOC)/ endif -libs-y += board/$(BOARDDIR)/ +libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/) libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/ libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/ diff --git a/tools/env/aes.c b/tools/env/aes.c new file mode 100644 index 0000000..9e42679 --- /dev/null +++ b/tools/env/aes.c @@ -0,0 +1 @@ +#include "../../lib/aes.c" diff --git a/tools/logos/syteco.bmp b/tools/logos/syteco.bmp Binary files differindex 9a994fe..14031f2 100644 --- a/tools/logos/syteco.bmp +++ b/tools/logos/syteco.bmp diff --git a/tools/patman/README b/tools/patman/README index b3aba13..5fb508b 100644 --- a/tools/patman/README +++ b/tools/patman/README @@ -192,6 +192,7 @@ END A sign-off is added automatically to your patches (this is probably a bug). If you put this tag in your patches, it will override the default signoff that patman automatically adds. + Multiple duplicate signoffs will be removed. Tested-by: Their Name <email> Reviewed-by: Their Name <email> diff --git a/tools/patman/commit.py b/tools/patman/commit.py index 89cce7f..3e0adb8 100644 --- a/tools/patman/commit.py +++ b/tools/patman/commit.py @@ -29,6 +29,7 @@ class Commit: self.tags = [] self.changes = {} self.cc_list = [] + self.signoff_set = set() self.notes = [] def AddChange(self, version, info): @@ -72,3 +73,16 @@ class Commit: cc_list: List of aliases or email addresses """ self.cc_list += cc_list + + def CheckDuplicateSignoff(self, signoff): + """Check a list of signoffs we have send for this patch + + Args: + signoff: Signoff line + Returns: + True if this signoff is new, False if we have already seen it. + """ + if signoff in self.signoff_set: + return False + self.signoff_set.add(signoff) + return True diff --git a/tools/patman/gitutil.py b/tools/patman/gitutil.py index 5dcbaa3..3ea256d 100644 --- a/tools/patman/gitutil.py +++ b/tools/patman/gitutil.py @@ -11,6 +11,7 @@ import subprocess import sys import terminal +import checkpatch import settings @@ -193,6 +194,7 @@ def ApplyPatch(verbose, fname): Args: fname: filename of patch file to apply """ + col = terminal.Color() cmd = ['git', 'am', fname] pipe = subprocess.Popen(cmd, stdout=subprocess.PIPE, stderr=subprocess.PIPE) @@ -203,8 +205,8 @@ def ApplyPatch(verbose, fname): print line match = re_error.match(line) if match: - print GetWarningMsg('warning', match.group(1), int(match.group(2)), - 'Patch failed') + print checkpatch.GetWarningMsg(col, 'warning', match.group(1), + int(match.group(2)), 'Patch failed') return pipe.returncode == 0, stdout def ApplyPatches(verbose, args, start_point): diff --git a/tools/patman/patchstream.py b/tools/patman/patchstream.py index c4017e0..3228719 100644 --- a/tools/patman/patchstream.py +++ b/tools/patman/patchstream.py @@ -21,7 +21,7 @@ re_remove = re.compile('^BUG=|^TEST=|^BRANCH=|^Change-Id:|^Review URL:' re_allowed_after_test = re.compile('^Signed-off-by:') # Signoffs -re_signoff = re.compile('^Signed-off-by:') +re_signoff = re.compile('^Signed-off-by: *(.*)') # The start of the cover letter re_cover = re.compile('^Cover-letter:') @@ -159,6 +159,7 @@ class PatchStream: commit_tag_match = re_commit_tag.match(line) commit_match = re_commit.match(line) if self.is_log else None cover_cc_match = re_cover_cc.match(line) + signoff_match = re_signoff.match(line) tag_match = None if self.state == STATE_PATCH_HEADER: tag_match = re_tag.match(line) @@ -223,7 +224,7 @@ class PatchStream: if is_blank: # Blank line ends this change list self.in_change = 0 - elif line == '---' or re_signoff.match(line): + elif line == '---': self.in_change = 0 out = self.ProcessLine(line) else: @@ -272,6 +273,12 @@ class PatchStream: else: self.tags.append(line); + # Suppress duplicate signoffs + elif signoff_match: + if (self.is_log or + self.commit.CheckDuplicateSignoff(signoff_match.group(1))): + out = [line] + # Well that means this is an ordinary line else: pos = 1 |
