diff options
| -rw-r--r-- | board/freescale/mx51evk/mx51evk.c | 59 | ||||
| -rw-r--r-- | include/configs/mx51evk.h | 13 |
2 files changed, 71 insertions, 1 deletions
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index b505a71..bc7f057 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -36,6 +36,12 @@ #include <fsl_pmic.h> #include <mc13892.h> #include <usb/ehci-fsl.h> +#include <linux/fb.h> +#include <ipu_pixfmt.h> + +#define MX51EVK_LCD_3V3 (3 * 32 + 9) /* GPIO4_9 */ +#define MX51EVK_LCD_5V (3 * 32 + 10) /* GPIO4_10 */ +#define MX51EVK_LCD_BACKLIGHT (2 * 32 + 4) /* GPIO3_4 */ DECLARE_GLOBAL_DATA_PTR; @@ -453,6 +459,54 @@ int board_mmc_init(bd_t *bis) } #endif +static struct fb_videomode claa_wvga = { + .name = "CLAA07LC0ACW", + .refresh = 57, + .xres = 800, + .yres = 480, + .pixclock = 37037, + .left_margin = 40, + .right_margin = 60, + .upper_margin = 10, + .lower_margin = 10, + .hsync_len = 20, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +}; + +void lcd_iomux(void) +{ + /* DI2_PIN15 */ + mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4); + + /* Pad settings for MX51_PIN_DI2_DISP_CLK */ + mxc_iomux_set_pad(MX51_PIN_DI2_DISP_CLK, PAD_CTL_HYS_NONE | + PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER | + PAD_CTL_DRV_MAX | PAD_CTL_SRE_SLOW); + + /* Turn on 3.3V voltage for LCD */ + mxc_request_iomux(MX51_PIN_CSI2_D12, IOMUX_CONFIG_ALT3); + gpio_direction_output(MX51EVK_LCD_3V3, 1); + + /* Turn on 5V voltage for LCD */ + mxc_request_iomux(MX51_PIN_CSI2_D13, IOMUX_CONFIG_ALT3); + gpio_direction_output(MX51EVK_LCD_5V, 1); + + /* Turn on GPIO backlight */ + mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4); + mxc_iomux_set_input(MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT, + INPUT_CTL_PATH1); + gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1); +} + +void lcd_enable(void) +{ + int ret = mx51_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565); + if (ret) + printf("LCD cannot be configured: %d\n", ret); +} + int board_early_init_f(void) { setup_iomux_uart(); @@ -460,6 +514,7 @@ int board_early_init_f(void) #ifdef CONFIG_USB_EHCI_MX5 setup_usb_h1(); #endif + lcd_iomux(); return 0; } @@ -469,6 +524,8 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + lcd_enable(); + return 0; } @@ -479,6 +536,8 @@ int board_late_init(void) setup_iomux_spi(); power_init(); #endif + setenv("stdout", "serial"); + return 0; } #endif diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 1477b21..58b6f1c 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -51,7 +51,7 @@ /* * Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) +#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) #define CONFIG_BOARD_LATE_INIT @@ -123,6 +123,17 @@ #define CONFIG_MXC_USB_PORTSC PORT_PTS_ULPI #define CONFIG_MXC_USB_FLAGS MXC_EHCI_POWER_PINS_ENABLED +/* Framebuffer and LCD */ +#define CONFIG_PREBOOT +#define CONFIG_VIDEO +#define CONFIG_VIDEO_MX5 +#define CONFIG_CFB_CONSOLE +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_VIDEO_BMP_RLE8 +#define CONFIG_SPLASH_SCREEN +#define CONFIG_BMP_16BPP +#define CONFIG_VIDEO_LOGO + /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_CONS_INDEX 1 |