diff options
460 files changed, 9745 insertions, 15591 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 59599b8..9734b1d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -201,6 +201,8 @@ Frank Gottschling <fgottschling@eltec.de> Wolfgang Grandegger <wg@denx.de> + ipek01 MPC5200 + CCM MPC855 PN62 MPC8240 @@ -543,6 +545,10 @@ Rick Bronson <rick@efn.org> AT91RM9200DK at91rm9200 +Po-Yu Chuang <ratbert@faraday-tech.com> + + a320evb FA526 (ARM920T-like) (a320 SoC) + George G. Davis <gdavis@mvista.com> assabet SA1100 @@ -712,6 +718,10 @@ Andrea Scian <andrea.scian@dave-tech.it> B2 ARM7TDMI (S3C44B0X) +Nick Thompson <nick.thompson@gefanuc.com> + + da830evm ARM926EJS (DA830/OMAP-L137) + Albin Tonnerre <albin.tonnerre@free-electrons.com> sbc35_a9g20 ARM926EJS (AT91SAM9G20 SoC) @@ -64,6 +64,7 @@ LIST_5xxx=" \ icecube_5100 \ icecube_5200 \ inka4x0 \ + ipek01 \ lite5200b \ mcc200 \ mecp5200 \ @@ -539,6 +540,7 @@ LIST_ARM7=" \ ######################################################################### LIST_ARM9=" \ + a320evb \ ap920t \ ap922_XA10 \ ap926ejs \ @@ -549,6 +551,7 @@ LIST_ARM9=" \ cp926ejs \ cp946es \ cp966 \ + da830evm \ imx27lite \ lpd7a400 \ mv88f6281gtw_ge \ @@ -606,6 +606,9 @@ jupiter_config: unconfig inka4x0_config: unconfig @$(MKCONFIG) inka4x0 ppc mpc5xxx inka4x0 +ipek01_config: unconfig + @$(MKCONFIG) -a ipek01 ppc mpc5xxx ipek01 + lite5200b_config \ lite5200b_PM_config \ lite5200b_LOWBOOT_config: unconfig @@ -2693,6 +2696,9 @@ shannon_config : unconfig ## ARM92xT Systems ######################################################################### +a320evb_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm920t a320evb faraday a320 + ######################################################################### ## Atmel AT91RM9200 Systems ######################################################################### @@ -2927,6 +2933,9 @@ cp922_XA10_config \ cp1026_config: unconfig @board/armltd/integrator/split_by_variant.sh cp $@ +da830evm_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs da830evm davinci davinci + davinci_dvevm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci @@ -777,7 +777,7 @@ The following options need to be configured: CONFIG_LBA48 Set this to enable support for disks larger than 137GB - Also look at CONFIG_SYS_64BIT_LBA ,CONFIG_SYS_64BIT_VSPRINTF and CONFIG_SYS_64BIT_STRTOUL + Also look at CONFIG_SYS_64BIT_LBA. Whithout these , LBA48 support uses 32bit variables and will 'only' support disks up to 2.1TB. @@ -2524,13 +2524,6 @@ use the "saveenv" command to store a valid environment. - CONFIG_SYS_FAULT_MII_ADDR: MII address of the PHY to check for the Ethernet link state. -- CONFIG_SYS_64BIT_VSPRINTF: - Makes vsprintf (and all *printf functions) support printing - of 64bit values by using the L quantifier - -- CONFIG_SYS_64BIT_STRTOUL: - Adds simple_strtoull that returns a 64bit value - - CONFIG_NS16550_MIN_FUNCTIONS: Define this if you desire to only have use of the NS16550_init and NS16550_putc functions for the serial driver located at diff --git a/board/Marvell/sheevaplug/kwbimage.cfg b/board/Marvell/sheevaplug/kwbimage.cfg index 6c47d62..3b9c53f 100644 --- a/board/Marvell/sheevaplug/kwbimage.cfg +++ b/board/Marvell/sheevaplug/kwbimage.cfg @@ -74,11 +74,11 @@ DATA 0xFFD0140C 0x00000a33 # DDR Timing (High) # bit12-11: TW2W # bit31-13: zero required -DATA 0xFFD01410 0x00000099 # DDR Address Control -# bit1-0: 01, Cs0width=x16 -# bit3-2: 10, Cs0size=512Mb -# bit5-4: 01, Cs1width=x16 -# bit7-6: 10, Cs1size=512Mb +DATA 0xFFD01410 0x000000cc # DDR Address Control +# bit1-0: 00, Cs0width=x8 +# bit3-2: 11, Cs0size=1Gb +# bit5-4: 00, Cs1width=x8 +# bit7-6: 11, Cs1size=1Gb # bit9-8: 00, Cs2width=nonexistent # bit11-10: 00, Cs2size =nonexistent # bit13-12: 00, Cs3width=nonexistent diff --git a/board/amcc/acadia/config.mk b/board/amcc/acadia/config.mk index 290415c..01db41c 100644 --- a/board/amcc/acadia/config.mk +++ b/board/amcc/acadia/config.mk @@ -34,3 +34,7 @@ endif ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG endif + +ifdef CONFIG_NAND_U_BOOT +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds +endif diff --git a/board/amcc/acadia/u-boot.lds b/board/amcc/acadia/u-boot.lds deleted file mode 100644 index d37200d..0000000 --- a/board/amcc/acadia/u-boot.lds +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index 2598f2c..c90f86b 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -466,166 +466,6 @@ phys_size_t initdram (int board_type) #endif } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB3 devices to 0. - | Set PLB3 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB4 devices to 0. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /*-------------------------------------------------------------------------+ - | Set Nebula PLB4 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Set up Direct MMIO registers - *--------------------------------------------------------------------------*/ - /*--------------------------------------------------------------------------+ - | PowerPC440 EP PCI Master configuration. - | Map one 1Gig range of PLB/processor addresses to PCI memory space. - | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF - | Use byte reversed out routines to handle endianess. - | Make this region non-prefetchable. - +--------------------------------------------------------------------------*/ - out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /*--------------------------------------------------------------------------+ - * Set up Configuration registers - *--------------------------------------------------------------------------*/ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -/************************************************************************* - * pci_master_init - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /*--------------------------------------------------------------------------+ - | Write the PowerPC440 EP PCI Configuration regs. - | Enable PowerPC440 EP to be a master on the PCI bus (PMM). - | Enable PowerPC440 EP to act as a PCI memory target (PTM). - +--------------------------------------------------------------------------*/ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* Bamboo is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - /*----------------------------------------------------------------------------+ | is_powerpc440ep_pass1. +----------------------------------------------------------------------------*/ diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk index a37636a..72b6bc0 100644 --- a/board/amcc/bamboo/config.mk +++ b/board/amcc/bamboo/config.mk @@ -36,3 +36,7 @@ endif ifeq ($(dbcr),1) PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 endif + +ifdef CONFIG_NAND_U_BOOT +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds +endif diff --git a/board/amcc/bamboo/u-boot.lds b/board/amcc/bamboo/u-boot.lds deleted file mode 100644 index bcde534..0000000 --- a/board/amcc/bamboo/u-boot.lds +++ /dev/null @@ -1,143 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/bamboo/init.o (.text) - board/amcc/bamboo/bamboo.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/bubinga/u-boot.lds b/board/amcc/bubinga/u-boot.lds deleted file mode 100644 index d37200d..0000000 --- a/board/amcc/bubinga/u-boot.lds +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 91fae19..13a0dac 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -326,141 +326,17 @@ phys_size_t initdram(int board_type) } #endif -/* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /* - * Disable everything - */ - out_le32((void *)PCIL0_PIM0SA, 0); /* disable */ - out_le32((void *)PCIL0_PIM1SA, 0); /* disable */ - out_le32((void *)PCIL0_PIM2SA, 0); /* disable */ - out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */ - - /* - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 - * strapping options to not support sizes such as 128/256 MB. - */ - out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out_le32((void *)PCIL0_PIM0LAH, 0); - out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); - out_le32((void *)PCIL0_BAR0, 0); - - /* - * Program the board's subsystem id/vendor id - */ - out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - - out_le16((void *)PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - #if defined(CONFIG_PCI) -/* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - */ -int is_pci_host(struct pci_controller *hose) +int board_pcie_first(void) { - /* Board is always configured as host. */ - return (1); -} - -static struct pci_controller pcie_hose[2] = {{0},{0}}; - -void pcie_setup_hoses(int busno) -{ - struct pci_controller *hose; - int i, bus; - int ret = 0; - char *env; - unsigned int delay; - int start; - - /* - * assume we're called after the PCIX hose is initialized, which takes - * bus ID 0 and therefore start numbering PCIe's from 1. - */ - bus = busno; - /* * Canyonlands with SATA enabled has only one PCIe slot * (2nd one). */ if (gd->board_type == BOARD_CANYONLANDS_SATA) - start = 1; - else - start = 0; - - for (i = start; i <= 1; i++) { + return 1; - if (is_end_point(i)) - ret = ppc4xx_init_pcie_endport(i); - else - ret = ppc4xx_init_pcie_rootport(i); - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv ("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } - - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } - } + return 0; } #endif /* CONFIG_PCI */ diff --git a/board/amcc/canyonlands/config.mk b/board/amcc/canyonlands/config.mk index 551a817..7a58665 100644 --- a/board/amcc/canyonlands/config.mk +++ b/board/amcc/canyonlands/config.mk @@ -39,3 +39,7 @@ endif ifeq ($(dbcr),1) PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 endif + +ifdef CONFIG_NAND_U_BOOT +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds +endif diff --git a/board/amcc/canyonlands/u-boot.lds b/board/amcc/canyonlands/u-boot.lds deleted file mode 100644 index 22fb8b8..0000000 --- a/board/amcc/canyonlands/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2008 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/canyonlands/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c index 0ca1acc..923dbca 100644 --- a/board/amcc/ebony/ebony.c +++ b/board/amcc/ebony/ebony.c @@ -164,96 +164,3 @@ long int fixed_sdram(void) return (128 * 1024 * 1024); /* 128 MB */ } #endif /* !defined(CONFIG_SPD_EEPROM) */ - -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long strap; - - /*--------------------------------------------------------------------------+ - * The ebony board is always configured as the host & requires the - * PCI arbiter to be enabled. - *--------------------------------------------------------------------------*/ - strap = mfdcr(CPC0_STRP1); - if ((strap & 0x00100000) == 0) { - printf("PCI: CPC0_STRP1[PAE] not set.\n"); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r(PCIL0_PIM0SA, 0); /* disable */ - out32r(PCIL0_PIM1SA, 0); /* disable */ - out32r(PCIL0_PIM2SA, 0); /* disable */ - out32r(PCIL0_EROMBA, 0); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r(PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out32r(PCIL0_PIM0LAH, 0); - out32r(PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); - - out32r(PCIL0_BAR0, 0); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r(PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out16r(PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - - out16r(PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* The ebony board is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ diff --git a/board/amcc/ebony/u-boot.lds b/board/amcc/ebony/u-boot.lds deleted file mode 100644 index 4cb2e6c..0000000 --- a/board/amcc/ebony/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/ebony/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/katmai/Makefile b/board/amcc/katmai/Makefile index 318016d..168bab5 100644 --- a/board/amcc/katmai/Makefile +++ b/board/amcc/katmai/Makefile @@ -25,9 +25,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o cmd_katmai.o +COBJS-y := $(BOARD).o +COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o SOBJS = init.o +COBJS := $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/amcc/katmai/chip_config.c b/board/amcc/katmai/chip_config.c new file mode 100644 index 0000000..efaf378 --- /dev/null +++ b/board/amcc/katmai/chip_config.c @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/ppc4xx_config.h> + +struct ppc4xx_config ppc4xx_config_val[] = { + { + "400-133","CPU: 400 PLB: 133 OPB: 66 EBC: 66", + { 0x86, 0x78, 0xc2, 0xc6, 0x05, 0xa5, 0x04, 0xe1 } + }, + { + "500-166","CPU: 500 PLB: 166 OPB: 83 EBC: 83", + { 0x87, 0x78, 0xf2, 0xc6, 0x05, 0xa5, 0x04, 0xe1 } + }, + { + "533-133","CPU: 533 PLB: 133 OPB: 66 EBC: 66", + { 0x87, 0x79, 0x02, 0x52, 0x05, 0xa5, 0x04, 0xe1 } + }, + { + "667-133","CPU: 667 PLB: 133 OPB: 66 EBC: 66", + { 0x87, 0x79, 0x42, 0x56, 0x05, 0xa5, 0x04, 0xe1 } + }, + { + "667-166","CPU: 667 PLB: 166 OPB: 83 EBC: 83", + { 0x87, 0x79, 0x42, 0x06, 0x05, 0xa5, 0x04, 0xe1 } + }, + { + "800-160","CPU: 800 PLB: 160 OPB: 53 EBC: 17", + { 0x86, 0x79, 0x81, 0xa7, 0x07, 0xa5, 0x04, 0xe1 } + }, +}; + +int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val); diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c deleted file mode 100644 index 335d30c..0000000 --- a/board/amcc/katmai/cmd_katmai.c +++ /dev/null @@ -1,218 +0,0 @@ -/* - * (C) Copyright 2007 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - * - */ - -#include <common.h> -#include <command.h> -#include <i2c.h> -#include <asm/byteorder.h> - -#define CONFIG_STRESS /* enable 667 MHz CPU freq selection */ -#define DEBUG - -static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - uchar chip; - ulong data; - int nbytes; - extern char console_buffer[]; - - char sysClock[4]; - char cpuClock[4]; - char plbClock[4]; - char pcixClock[4]; - - if (argc < 3) { - cmd_usage(cmdtp); - return 1; - } - - if (strcmp(argv[2], "prom0") == 0) - chip = IIC0_BOOTPROM_ADDR; - else - chip = IIC0_ALT_BOOTPROM_ADDR; - - /* on Katmai SysClk is always 33MHz */ - strcpy(sysClock, "33"); - - do { -#ifdef CONFIG_STRESS - printf("enter cpu clock frequency 400, 500, 533, 667 MHz or quit to abort\n"); -#else - printf("enter cpu clock frequency 400, 500, 533 MHz or quit to abort\n"); -#endif - nbytes = readline (" ? "); - - if (strcmp(console_buffer, "quit") == 0) - return 0; - - if ((strcmp(console_buffer, "400") != 0) && - (strcmp(console_buffer, "500") != 0) && - (strcmp(console_buffer, "533") != 0) -#ifdef CONFIG_STRESS - && (strcmp(console_buffer, "667") != 0) -#endif - ) { - nbytes = 0; - } - - strcpy(cpuClock, console_buffer); - - } while (nbytes == 0); - - if (strcmp(cpuClock, "500") == 0) - strcpy(plbClock, "166"); - else if (strcmp(cpuClock, "533") == 0) - strcpy(plbClock, "133"); - else { - do { - if (strcmp(cpuClock, "400") == 0) - printf("enter plb clock frequency 100, 133 MHz or quit to abort\n"); - -#ifdef CONFIG_STRESS - if (strcmp(cpuClock, "667") == 0) - printf("enter plb clock frequency 133, 166 MHz or quit to abort\n"); - -#endif - nbytes = readline (" ? "); - - if (strcmp(console_buffer, "quit") == 0) - return 0; - - if (strcmp(cpuClock, "400") == 0) { - if ((strcmp(console_buffer, "100") != 0) && - (strcmp(console_buffer, "133") != 0)) - nbytes = 0; - } -#ifdef CONFIG_STRESS - if (strcmp(cpuClock, "667") == 0) { - if ((strcmp(console_buffer, "133") != 0) && - (strcmp(console_buffer, "166") != 0)) - nbytes = 0; - } -#endif - strcpy(plbClock, console_buffer); - - } while (nbytes == 0); - } - - do { - printf("enter Pci-X clock frequency 33, 66, 100 or 133 MHz or quit to abort\n"); - nbytes = readline (" ? "); - - if (strcmp(console_buffer, "quit") == 0) - return 0; - - if ((strcmp(console_buffer, "33") != 0) && - (strcmp(console_buffer, "66") != 0) && - (strcmp(console_buffer, "100") != 0) && - (strcmp(console_buffer, "133") != 0)) { - nbytes = 0; - } - strcpy(pcixClock, console_buffer); - - } while (nbytes == 0); - - printf("\nsys clk = %s MHz\n", sysClock); - printf("cpu clk = %s MHz\n", cpuClock); - printf("plb clk = %s MHz\n", plbClock); - printf("Pci-X clk = %s MHz\n", pcixClock); - - do { - printf("\npress [y] to write I2C bootstrap \n"); - printf("or [n] to abort. \n"); - printf("Don't forget to set board switches \n"); - printf("according to your choice before re-starting \n"); - printf("(refer to 440spe_uboot_kit_um_1_01.pdf) \n"); - - nbytes = readline (" ? "); - if (strcmp(console_buffer, "n") == 0) - return 0; - - } while (nbytes == 0); - - if (strcmp(sysClock, "33") == 0) { - if ((strcmp(cpuClock, "400") == 0) && - (strcmp(plbClock, "100") == 0)) - data = 0x8678c206; - - if ((strcmp(cpuClock, "400") == 0) && - (strcmp(plbClock, "133") == 0)) - data = 0x8678c2c6; - - if ((strcmp(cpuClock, "500") == 0)) - data = 0x8778f2c6; - - if ((strcmp(cpuClock, "533") == 0)) - data = 0x87790252; -#ifdef CONFIG_STRESS - if ((strcmp(cpuClock, "667") == 0) && - (strcmp(plbClock, "133") == 0)) - data = 0x87794256; - - if ((strcmp(cpuClock, "667") == 0) && - (strcmp(plbClock, "166") == 0)) - data = 0x87794206; -#endif - } -#ifdef DEBUG - printf(" pin strap0 to write in i2c = %lx\n", data); -#endif /* DEBUG */ - - if (i2c_write(chip, 0, 1, (uchar *)&data, 4) != 0) - printf("Error writing strap0 in %s\n", argv[2]); - - if (strcmp(pcixClock, "33") == 0) - data = 0x000007E1; - - if (strcmp(pcixClock, "66") == 0) - data = 0x000006E1; - - if (strcmp(pcixClock, "100") == 0) - data = 0x000005E1; - - if (strcmp(pcixClock, "133") == 0) - data = 0x000004E1; - - if (strcmp(plbClock, "166") == 0) -/* data |= 0x05950000; */ /* this set's DDR2 clock == PLB clock */ - data |= 0x05A50000; /* this set's DDR2 clock == 2 * PLB clock */ - else - data |= 0x05A50000; - -#ifdef DEBUG - printf(" pin strap1 to write in i2c = %lx\n", data); -#endif /* DEBUG */ - - udelay(1000); - if (i2c_write(chip, 4, 1, (uchar *)&data, 4) != 0) - printf("Error writing strap1 in %s\n", argv[2]); - - return 0; -} - -U_BOOT_CMD( - bootstrap, 3, 1, do_bootstrap, - "program the serial device strap", - "wrclk [prom0|prom1] - program the serial device strap" -); diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index 908f1a5..54e2a39 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007-2008 + * (C) Copyright 2007-2009 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -260,98 +260,8 @@ u32 ddr_clktr(u32 default_val) { return (SDRAM_CLKTR_CLKP_90_DEG_ADV); } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - unsigned long strap; - - /*-------------------------------------------------------------------+ - * The katmai board is always configured as the host & requires the - * PCI arbiter to be enabled. - *-------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*-------------------------------------------------------------------+ - * Disable everything - *-------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*-------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 - * strapping options to not support sizes such as 128/256 MB. - *-------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - out32r( PCIL0_BAR0, 0 ); - - /*-------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *-------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - #if defined(CONFIG_PCI) -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -int is_pci_host(struct pci_controller *hose) -{ - /* The katmai board is always configured as host. */ - return 1; -} - -static int katmai_pcie_card_present(int port) +int board_pcie_card_present(int port) { u32 val; @@ -367,91 +277,8 @@ static int katmai_pcie_card_present(int port) return 0; } } - -static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; - -void pcie_setup_hoses(int busno) -{ - struct pci_controller *hose; - int i, bus; - int ret = 0; - char *env; - unsigned int delay; - - /* - * assume we're called after the PCIX hose is initialized, which takes - * bus ID 0 and therefore start numbering PCIe's from 1. - */ - bus = busno; - for (i = 0; i <= 2; i++) { - /* Check for katmai card presence */ - if (!katmai_pcie_card_present(i)) - continue; - - if (is_end_point(i)) - ret = ppc4xx_init_pcie_endport(i); - else - ret = ppc4xx_init_pcie_rootport(i); - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv ("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } - - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } - } -} #endif /* defined(CONFIG_PCI) */ -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return (ctrlc()); -} -#endif - int board_eth_init(bd_t *bis) { cpu_eth_init(bis); diff --git a/board/amcc/katmai/u-boot.lds b/board/amcc/katmai/u-boot.lds deleted file mode 100644 index f2231c2..0000000 --- a/board/amcc/katmai/u-boot.lds +++ /dev/null @@ -1,138 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - board/amcc/katmai/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/kilauea/config.mk b/board/amcc/kilauea/config.mk index f5800eb..b3d3f22 100644 --- a/board/amcc/kilauea/config.mk +++ b/board/amcc/kilauea/config.mk @@ -30,3 +30,7 @@ endif ifeq ($(debug),1) PLATFORM_CPPFLAGS += -DDEBUG endif + +ifdef CONFIG_NAND_U_BOOT +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds +endif diff --git a/board/amcc/kilauea/kilauea.c b/board/amcc/kilauea/kilauea.c index 5cd822a..8ce2445 100644 --- a/board/amcc/kilauea/kilauea.c +++ b/board/amcc/kilauea/kilauea.c @@ -252,15 +252,19 @@ int board_emac_count(void) return 2; } -static int board_pcie_count(void) +/* + * Override the weak default implementation and return the + * last PCIe slot number (max number - 1). + */ +int board_pcie_last(void) { /* * 405EXr only has one EMAC interface, 405EX has two */ if (is_405exr()) - return 1; + return 1 - 1; else - return 2; + return 2 - 1; } int checkboard (void) @@ -280,100 +284,3 @@ int checkboard (void) return (0); } - -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - return 0; -} -#endif /* defined(CONFIG_PCI) */ - -#ifdef CONFIG_PCI -static struct pci_controller pcie_hose[2] = {{0},{0}}; - -void pcie_setup_hoses(int busno) -{ - struct pci_controller *hose; - int i, bus; - int ret = 0; - bus = busno; - char *env; - unsigned int delay; - - for (i = 0; i < board_pcie_count(); i++) { - - if (is_end_point(i)) - ret = ppc4xx_init_pcie_endport(i); - else - ret = ppc4xx_init_pcie_rootport(i); - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv ("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } - - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } - } -} -#endif - -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ diff --git a/board/amcc/kilauea/u-boot.lds b/board/amcc/kilauea/u-boot.lds deleted file mode 100644 index bebb2b2..0000000 --- a/board/amcc/kilauea/u-boot.lds +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ -/* To compile successfully, uncomment the following section. - * To go in ram, remove the section. - * Added by SunHe. - */ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index a04f2af..332d170 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -127,102 +127,6 @@ u32 ddr_clktr(u32 default_val) { } /************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init( struct pci_controller *hose ) -{ - unsigned long strap; - - /*--------------------------------------------------------------------------+ - * The luan board is always configured as the host & requires the - * PCI arbiter to be enabled. - *--------------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); - - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - - out32r( PCIL0_BAR0, 0 ); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - - -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - return 1; -} -#endif /* defined(CONFIG_PCI) */ - - -/************************************************************************* * hw_watchdog_reset * * This routine is called to reset (keep alive) the watchdog timer diff --git a/board/amcc/luan/u-boot.lds b/board/amcc/luan/u-boot.lds deleted file mode 100644 index 12c5b60..0000000 --- a/board/amcc/luan/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/luan/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/makalu/makalu.c b/board/amcc/makalu/makalu.c index d4277dd..4afe091 100644 --- a/board/amcc/makalu/makalu.c +++ b/board/amcc/makalu/makalu.c @@ -236,100 +236,3 @@ int checkboard (void) return (0); } - -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - return 0; -} -#endif /* defined(CONFIG_PCI) */ - -#ifdef CONFIG_PCI -static struct pci_controller pcie_hose[2] = {{0},{0}}; - -void pcie_setup_hoses(int busno) -{ - struct pci_controller *hose; - int i, bus; - int ret = 0; - bus = busno; - char *env; - unsigned int delay; - - for (i = 0; i < 2; i++) { - - if (is_end_point(i)) - ret = ppc4xx_init_pcie_endport(i); - else - ret = ppc4xx_init_pcie_rootport(i); - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv ("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } - - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } - } -} -#endif - -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ diff --git a/board/amcc/makalu/u-boot.lds b/board/amcc/makalu/u-boot.lds deleted file mode 100644 index bebb2b2..0000000 --- a/board/amcc/makalu/u-boot.lds +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ -/* To compile successfully, uncomment the following section. - * To go in ram, remove the section. - * Added by SunHe. - */ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c index 0aa317e..7bffa3c 100644 --- a/board/amcc/ocotea/ocotea.c +++ b/board/amcc/ocotea/ocotea.c @@ -275,102 +275,6 @@ long int fixed_sdram (void) } #endif /* !defined(CONFIG_SPD_EEPROM) */ - -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - unsigned long strap; - - /*--------------------------------------------------------------------------+ - * The ocotea board is always configured as the host & requires the - * PCI arbiter to be enabled. - *--------------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - - out32r( PCIL0_BAR0, 0 ); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - - -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* The ocotea board is always configured as host. */ - return(1); -} -#endif /* defined(CONFIG_PCI) */ - - void fpga_init(void) { unsigned long group; @@ -496,15 +400,3 @@ void fpga_init(void) return; } - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - - return (ctrlc()); -} -#endif diff --git a/board/amcc/ocotea/u-boot.lds b/board/amcc/ocotea/u-boot.lds deleted file mode 100644 index b0b4c00..0000000 --- a/board/amcc/ocotea/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/ocotea/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/redwood/u-boot.lds b/board/amcc/redwood/u-boot.lds deleted file mode 100644 index 7bda06e..0000000 --- a/board/amcc/redwood/u-boot.lds +++ /dev/null @@ -1,145 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/redwood/init.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/sequoia/config.mk b/board/amcc/sequoia/config.mk index 6c748c9..b57e473 100644 --- a/board/amcc/sequoia/config.mk +++ b/board/amcc/sequoia/config.mk @@ -43,3 +43,7 @@ endif ifeq ($(dbcr),1) PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 endif + +ifdef CONFIG_NAND_U_BOOT +LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds +endif diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 00f6408..6756a27 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -364,183 +364,12 @@ int checkboard(void) /* * Assign interrupts to PCI devices. */ -void sequoia_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIRQ2); } #endif -/* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - */ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /* - * Set priority for all PLB3 devices to 0. - * Set PLB3 arbiter to fair mode. - */ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /* - * Set priority for all PLB4 devices to 0. - */ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /* - * Set Nebula PLB4 arbiter to fair mode. - */ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - -#ifdef CONFIG_PCI_PNP - hose->fixup_irq = sequoia_pci_fixup_irq; -#endif - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /* - * Set up Direct MMIO registers - */ - /* - * PowerPC440EPX PCI Master configuration. - * Map one 1Gig range of PLB/processor addresses to PCI memory space. - * PLB address 0xA0000000-0xDFFFFFFF - * ==> PCI address 0xA0000000-0xDFFFFFFF - * Use byte reversed out routines to handle endianess. - * Make this region non-prefetchable. - */ - out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ - /* - disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ - /* and enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ - /* - disabled b4 setting */ - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ - /* and enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /* - * Set up Configuration registers - */ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /* - * Write the PowerPC440 EP PCI Configuration regs. - * Enable PowerPC440 EP to be a master on the PCI bus (PMM). - * Enable PowerPC440 EP to act as a PCI memory target (PTM). - */ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - -/* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - */ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* Cactus is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ - #if defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_SYS_RAMBOOT) /* * On NAND-booting sequoia, we need to patch the chips select numbers diff --git a/board/amcc/sequoia/u-boot.lds b/board/amcc/sequoia/u-boot.lds deleted file mode 100644 index b9ec56b..0000000 --- a/board/amcc/sequoia/u-boot.lds +++ /dev/null @@ -1,142 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/taihu/u-boot.lds b/board/amcc/taihu/u-boot.lds deleted file mode 100644 index d37200d..0000000 --- a/board/amcc/taihu/u-boot.lds +++ /dev/null @@ -1,134 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c index 0c20faf..cac7a78 100644 --- a/board/amcc/taishan/taishan.c +++ b/board/amcc/taishan/taishan.c @@ -209,110 +209,6 @@ int checkboard (void) return (0); } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - unsigned long strap; - - /*--------------------------------------------------------------------------+ - * The ocotea board is always configured as the host & requires the - * PCI arbiter to be enabled. - *--------------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - - out32r( PCIL0_BAR0, 0 ); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* The ocotea board is always configured as host. */ - return(1); -} -#endif /* defined(CONFIG_PCI) */ - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return (ctrlc()); -} -#endif - int board_eth_init(bd_t *bis) { cpu_eth_init(bis); diff --git a/board/amcc/taishan/u-boot.lds b/board/amcc/taishan/u-boot.lds deleted file mode 100644 index c043f69..0000000 --- a/board/amcc/taishan/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/taishan/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/walnut/u-boot.lds b/board/amcc/walnut/u-boot.lds deleted file mode 100644 index d7a7857..0000000 --- a/board/amcc/walnut/u-boot.lds +++ /dev/null @@ -1,135 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/yosemite/u-boot.lds b/board/amcc/yosemite/u-boot.lds deleted file mode 100644 index b8646d5..0000000 --- a/board/amcc/yosemite/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/yosemite/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index ccbeb0e..98c1f3b 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -353,166 +353,6 @@ phys_size_t initdram(int board) } /************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB3 devices to 0. - | Set PLB3 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB4 devices to 0. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /*-------------------------------------------------------------------------+ - | Set Nebula PLB4 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Set up Direct MMIO registers - *--------------------------------------------------------------------------*/ - /*--------------------------------------------------------------------------+ - | PowerPC440 EP PCI Master configuration. - | Map one 1Gig range of PLB/processor addresses to PCI memory space. - | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF - | Use byte reversed out routines to handle endianess. - | Make this region non-prefetchable. - +--------------------------------------------------------------------------*/ - out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /*--------------------------------------------------------------------------+ - * Set up Configuration registers - *--------------------------------------------------------------------------*/ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -/************************************************************************* - * pci_master_init - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /*--------------------------------------------------------------------------+ - | Write the PowerPC440 EP PCI Configuration regs. - | Enable PowerPC440 EP to be a master on the PCI bus (PMM). - | Enable PowerPC440 EP to act as a PCI memory target (PTM). - +--------------------------------------------------------------------------*/ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* Bamboo is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* * hw_watchdog_reset * * This routine is called to reset (keep alive) the watchdog timer diff --git a/board/amcc/yucca/u-boot.lds b/board/amcc/yucca/u-boot.lds deleted file mode 100644 index 2d44c64..0000000 --- a/board/amcc/yucca/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/amcc/yucca/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index d8f4bcb..67a0167 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -588,98 +588,8 @@ u32 ddr_clktr(u32 default_val) { return default_val; } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ #if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - unsigned long strap; - - /*-------------------------------------------------------------------+ - * The yucca board is always configured as the host & requires the - * PCI arbiter to be enabled. - *-------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ) { - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*-------------------------------------------------------------------+ - * Disable everything - *-------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*-------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 - * strapping options to not support sizes such as 128/256 MB. - *-------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - out32r( PCIL0_BAR0, 0 ); - - /*-------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *-------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -#if defined(CONFIG_PCI) -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -int is_pci_host(struct pci_controller *hose) -{ - /* The yucca board is always configured as host. */ - return 1; -} - -static int yucca_pcie_card_present(int port) +int board_pcie_card_present(int port) { u16 reg; @@ -697,185 +607,54 @@ static int yucca_pcie_card_present(int port) } /* - * For the given slot, set rootpoint mode, send power to the slot, - * turn on the green LED and turn off the yellow LED, enable the clock - * and turn off reset. - */ -void yucca_setup_pcie_fpga_rootpoint(int port) -{ - u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; - - switch(port) { - case 0: - rootpoint = FPGA_REG1C_PE0_ROOTPOINT; - endpoint = 0; - power = FPGA_REG1A_PE0_PWRON; - green_led = FPGA_REG1A_PE0_GLED; - clock = FPGA_REG1A_PE0_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE0_YLED; - reset_off = FPGA_REG1C_PE0_PERST; - break; - case 1: - rootpoint = 0; - endpoint = FPGA_REG1C_PE1_ENDPOINT; - power = FPGA_REG1A_PE1_PWRON; - green_led = FPGA_REG1A_PE1_GLED; - clock = FPGA_REG1A_PE1_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE1_YLED; - reset_off = FPGA_REG1C_PE1_PERST; - break; - case 2: - rootpoint = 0; - endpoint = FPGA_REG1C_PE2_ENDPOINT; - power = FPGA_REG1A_PE2_PWRON; - green_led = FPGA_REG1A_PE2_GLED; - clock = FPGA_REG1A_PE2_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE2_YLED; - reset_off = FPGA_REG1C_PE2_PERST; - break; - - default: - return; - } - - out_be16((u16 *)FPGA_REG1A, - ~(power | clock | green_led) & - (yellow_led | in_be16((u16 *)FPGA_REG1A))); - - out_be16((u16 *)FPGA_REG1C, - ~(endpoint | reset_off) & - (rootpoint | in_be16((u16 *)FPGA_REG1C))); - /* - * Leave device in reset for a while after powering on the - * slot to give it a chance to initialize. - */ - udelay(250 * 1000); - - out_be16((u16 *)FPGA_REG1C, reset_off | in_be16((u16 *)FPGA_REG1C)); -} -/* * For the given slot, set endpoint mode, send power to the slot, - * turn on the green LED and turn off the yellow LED, enable the clock - * .In end point mode reset bit is read only. + * turn on the green LED and turn off the yellow LED, enable the + * clock. In end point mode reset bit is read only. */ -void yucca_setup_pcie_fpga_endpoint(int port) +void board_pcie_setup_port(int port, int rootpoint) { - u16 power, clock, green_led, yellow_led, reset_off, rootpoint, endpoint; + u16 power, clock, green_led, yellow_led, + reset_off, rp, ep; - switch(port) { + switch (port) { case 0: - rootpoint = FPGA_REG1C_PE0_ROOTPOINT; - endpoint = 0; - power = FPGA_REG1A_PE0_PWRON; - green_led = FPGA_REG1A_PE0_GLED; - clock = FPGA_REG1A_PE0_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE0_YLED; - reset_off = FPGA_REG1C_PE0_PERST; + rp = FPGA_REG1C_PE0_ROOTPOINT; + ep = 0; break; case 1: - rootpoint = 0; - endpoint = FPGA_REG1C_PE1_ENDPOINT; - power = FPGA_REG1A_PE1_PWRON; - green_led = FPGA_REG1A_PE1_GLED; - clock = FPGA_REG1A_PE1_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE1_YLED; - reset_off = FPGA_REG1C_PE1_PERST; + rp = 0; + ep = FPGA_REG1C_PE1_ENDPOINT; break; case 2: - rootpoint = 0; - endpoint = FPGA_REG1C_PE2_ENDPOINT; - power = FPGA_REG1A_PE2_PWRON; - green_led = FPGA_REG1A_PE2_GLED; - clock = FPGA_REG1A_PE2_REFCLK_ENABLE; - yellow_led = FPGA_REG1A_PE2_YLED; - reset_off = FPGA_REG1C_PE2_PERST; + rp = 0; + ep = FPGA_REG1C_PE2_ENDPOINT; break; default: return; } - out_be16((u16 *)FPGA_REG1A, - ~(power | clock | green_led) & - (yellow_led | in_be16((u16 *)FPGA_REG1A))); - - out_be16((u16 *)FPGA_REG1C, - ~(rootpoint | reset_off) & - (endpoint | in_be16((u16 *)FPGA_REG1C))); -} + power = FPGA_REG1A_PWRON_ENCODE(port); + green_led = FPGA_REG1A_GLED_ENCODE(port); + clock = FPGA_REG1A_REFCLK_ENCODE(port); + yellow_led = FPGA_REG1A_YLED_ENCODE(port); + reset_off = FPGA_REG1C_PERST_ENCODE(port); -static struct pci_controller pcie_hose[3] = {{0},{0},{0}}; + out_be16((u16 *)FPGA_REG1A, ~(power | clock | green_led) & + (yellow_led | in_be16((u16 *)FPGA_REG1A))); -void pcie_setup_hoses(int busno) -{ - struct pci_controller *hose; - int i, bus; - int ret = 0; - char *env; - unsigned int delay; + out_be16((u16 *)FPGA_REG1C, ~(ep | reset_off) & + (rp | in_be16((u16 *)FPGA_REG1C))); - /* - * assume we're called after the PCIX hose is initialized, which takes - * bus ID 0 and therefore start numbering PCIe's from 1. - */ - bus = busno; - for (i = 0; i <= 2; i++) { - /* Check for yucca card presence */ - if (!yucca_pcie_card_present(i)) - continue; - - if (is_end_point(i)) { - yucca_setup_pcie_fpga_endpoint(i); - ret = ppc4xx_init_pcie_endport(i); - } else { - yucca_setup_pcie_fpga_rootpoint(i); - ret = ppc4xx_init_pcie_rootport(i); - } - if (ret == -ENODEV) - continue; - if (ret) { - printf("PCIE%d: initialization as %s failed\n", i, - is_end_point(i) ? "endpoint" : "root-complex"); - continue; - } - - hose = &pcie_hose[i]; - hose->first_busno = bus; - hose->last_busno = bus; - hose->current_busno = bus; - - /* setup mem resource */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, - CONFIG_SYS_PCIE_MEMSIZE, - PCI_REGION_MEM); - hose->region_count = 1; - pci_register_hose(hose); - - if (is_end_point(i)) { - ppc4xx_setup_pcie_endpoint(hose, i); - /* - * Reson for no scanning is endpoint can not generate - * upstream configuration accesses. - */ - } else { - ppc4xx_setup_pcie_rootpoint(hose, i); - env = getenv("pciscandelay"); - if (env != NULL) { - delay = simple_strtoul(env, NULL, 10); - if (delay > 5) - printf("Warning, expect noticable delay before " - "PCIe scan due to 'pciscandelay' value!\n"); - mdelay(delay * 1000); - } + if (rootpoint) { + /* + * Leave device in reset for a while after powering on the + * slot to give it a chance to initialize. + */ + udelay(250 * 1000); - /* - * Config access can only go down stream - */ - hose->last_busno = pci_hose_scan(hose); - bus = hose->last_busno + 1; - } + out_be16((u16 *)FPGA_REG1C, + reset_off | in_be16((u16 *)FPGA_REG1C)); } } #endif /* defined(CONFIG_PCI) */ @@ -929,17 +708,6 @@ void fpga_init(void) return; } -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return (ctrlc()); -} -#endif - /*---------------------------------------------------------------------------+ | onboard_pci_arbiter_selected => from EPLD +---------------------------------------------------------------------------*/ diff --git a/board/amirix/ap1000/config.mk b/board/amirix/ap1000/config.mk index c09783a..09c6efa 100644 --- a/board/amirix/ap1000/config.mk +++ b/board/amirix/ap1000/config.mk @@ -25,3 +25,6 @@ # like it's not in RAM. This is a bit of voodoo to allow it to be # run from RAM instead of Flash. TEXT_BASE = 0x08000000 + +# Use board specific linker script +LDSCRIPT := $(SRCTREE)/board/amirix/ap1000/u-boot.lds diff --git a/board/armltd/integrator/timer.c b/board/armltd/integrator/timer.c index 087cf59..7562ffa 100644 --- a/board/armltd/integrator/timer.c +++ b/board/armltd/integrator/timer.c @@ -124,7 +124,7 @@ void set_timer (ulong ticks) } /* delay usec useconds */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo, tmp; diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c index 9e2f1a5..5ebcd66 100644 --- a/board/cm5200/cm5200.c +++ b/board/cm5200/cm5200.c @@ -271,13 +271,6 @@ static void ft_blob_update(void *blob, bd_t *bd) if (ret < 0) printf("ft_blob_update(): cannot set /model property err:%s\n", fdt_strerror(ret)); - - ret = fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); - - if (ret < 0) { - printf("ft_blob_update(): cannot set /memory/reg " - "property err:%s\n", fdt_strerror(ret)); - } } #endif /* defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_OF_LIBFDT) */ @@ -330,14 +323,6 @@ int board_early_init_r(void) } -#ifdef CONFIG_POST -int post_hotkeys_pressed(void) -{ - return 0; -} -#endif /* CONFIG_POST */ - - #if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) void post_word_store(ulong a) { diff --git a/board/cray/L1/u-boot.lds b/board/cray/L1/u-boot.lds deleted file mode 100644 index bd80df6..0000000 --- a/board/cray/L1/u-boot.lds +++ /dev/null @@ -1,150 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/cray/L1/init.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/*. = env_offset;*/ - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/csb272/u-boot.lds b/board/csb272/u-boot.lds deleted file mode 100644 index b58ccc5..0000000 --- a/board/csb272/u-boot.lds +++ /dev/null @@ -1,151 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/csb272/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - - lib_ppc/extable.o (.text) - lib_ppc/board.o (.text) - lib_generic/zlib.o (.text) -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/csb472/u-boot.lds b/board/csb472/u-boot.lds deleted file mode 100644 index ba37c1b..0000000 --- a/board/csb472/u-boot.lds +++ /dev/null @@ -1,151 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/csb472/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - - lib_ppc/extable.o (.text) - lib_ppc/board.o (.text) - lib_generic/zlib.o (.text) -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds deleted file mode 100644 index ee7f59e..0000000 --- a/board/dave/PPChameleonEVB/u-boot.lds +++ /dev/null @@ -1,153 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); - . = 0xFFFF8000; - .ppcenv : - { - common/env_embedded.o(.ppcenv); - } - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/davedenx/aria/aria.c b/board/davedenx/aria/aria.c index cc69c9d..f17df60 100644 --- a/board/davedenx/aria/aria.c +++ b/board/davedenx/aria/aria.c @@ -196,6 +196,5 @@ int checkboard (void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/davinci/common/misc.c b/board/davinci/common/misc.c index ffdc20b..9fab76f 100644 --- a/board/davinci/common/misc.c +++ b/board/davinci/common/misc.c @@ -1,6 +1,7 @@ /* * Miscelaneous DaVinci functions. * + * Copyright (C) 2009 Nick Thompson, GE Fanuc Ltd, <nick.thompson@gefanuc.com> * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> * Copyright (C) 2008 Lyrtech <www.lyrtech.com> * Copyright (C) 2004 Texas Instruments. @@ -27,7 +28,8 @@ #include <i2c.h> #include <net.h> #include <asm/arch/hardware.h> - +#include <asm/io.h> +#include "misc.h" DECLARE_GLOBAL_DATA_PTR; @@ -109,3 +111,47 @@ void dv_configure_mac_address(uint8_t *rom_enetaddr) } #endif /* DAVINCI_EMAC */ + +/* + * Change the setting of a pin multiplexer field. + * + * Takes an array of pinmux settings similar to: + * + * struct pinmux_config uart_pins[] = { + * { &davinci_syscfg_regs->pinmux[8], 2, 7 }, + * { &davinci_syscfg_regs->pinmux[9], 2, 0 } + * }; + * + * Stepping through the array, each pinmux[n] register has the given value + * set in the pin mux field specified. + * + * The number of pins in the array must be passed (ARRAY_SIZE can provide + * this value conveniently). + * + * Returns 0 if all field numbers and values are in the correct range, + * else returns -1. + */ +int davinci_configure_pin_mux(const struct pinmux_config *pins, + const int n_pins) +{ + int i; + + /* check for invalid pinmux values */ + for (i = 0; i < n_pins; i++) { + if (pins[i].field >= PIN_MUX_NUM_FIELDS || + (pins[i].value & ~PIN_MUX_FIELD_MASK) != 0) + return -1; + } + + /* configure the pinmuxes */ + for (i = 0; i < n_pins; i++) { + const int offset = pins[i].field * PIN_MUX_FIELD_SIZE; + const unsigned int value = pins[i].value << offset; + const unsigned int mask = PIN_MUX_FIELD_MASK << offset; + const dv_reg *mux = pins[i].mux; + + writel(value | (readl(mux) & (~mask)), mux); + } + + return 0; +} diff --git a/board/davinci/common/misc.h b/board/davinci/common/misc.h index dc3cc41..f6d8b1b 100644 --- a/board/davinci/common/misc.h +++ b/board/davinci/common/misc.h @@ -22,8 +22,20 @@ #ifndef __MISC_H #define __MISC_H +/* pin muxer definitions */ +#define PIN_MUX_NUM_FIELDS 8 /* Per register */ +#define PIN_MUX_FIELD_SIZE 4 /* n in bits */ +#define PIN_MUX_FIELD_MASK ((1 << PIN_MUX_FIELD_SIZE) - 1) + +/* pin definition */ +struct pinmux_config { + dv_reg *mux; /* Address of mux register */ + unsigned char value; /* Value to set in field */ + unsigned char field; /* field number */ +}; int dvevm_read_mac_address(uint8_t *buf); void dv_configure_mac_address(uint8_t *rom_enetaddr); +int davinci_configure_pin_mux(const struct pinmux_config *pins, int n_pins); #endif /* __MISC_H */ diff --git a/board/davinci/da830evm/Makefile b/board/davinci/da830evm/Makefile new file mode 100644 index 0000000..02636fa --- /dev/null +++ b/board/davinci/da830evm/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := da830evm.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak *~ .depend + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/davinci/da830evm/config.mk b/board/davinci/da830evm/config.mk new file mode 100644 index 0000000..6da29a9 --- /dev/null +++ b/board/davinci/da830evm/config.mk @@ -0,0 +1,43 @@ +# +# (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/ +# +# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> +# +# (C) Copyright 2002 +# Gary Jennejohn, DENX Software Engineering, <gj@denx.de> +# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# Texas Instruments DA8xx EVM board (ARM925EJS) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# DA8xx EVM has 1 bank of 64 MB SDRAM (2 16Meg x16 chips). +# Physical Address: +# C000'0000 to C400'0000 +# +# Linux-Kernel is expected to be at C000'8000, entry C000'8000 +# (mem base + reserved) +# +# we load ourself to C108 '0000 + + +#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0xC1080000 diff --git a/board/davinci/da830evm/da830evm.c b/board/davinci/da830evm/da830evm.c new file mode 100644 index 0000000..bb8cc3c --- /dev/null +++ b/board/davinci/da830evm/da830evm.c @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com> + * + * Base on code from TI. Original Notices follow: + * + * (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/ + * + * Modified for DA8xx EVM. + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * Parts are shamelessly stolen from various TI sources, original copyright + * follows: + * ----------------------------------------------------------------- + * + * Copyright (C) 2004 Texas Instruments. + * + * ---------------------------------------------------------------------------- + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + */ + +#include <common.h> +#include <i2c.h> +#include <asm/arch/hardware.h> +#include <asm/io.h> +#include "../common/misc.h" + +DECLARE_GLOBAL_DATA_PTR; + +#define pinmux &davinci_syscfg_regs->pinmux + +#ifdef CONFIG_SPI_FLASH +/* SPI0 pin muxer settings */ +const struct pinmux_config spi0_pins[] = { + { pinmux[7], 1, 3 }, + { pinmux[7], 1, 4 }, + { pinmux[7], 1, 5 }, + { pinmux[7], 1, 6 }, + { pinmux[7], 1, 7 } +}; +#endif + +/* UART pin muxer settings */ +const struct pinmux_config uart_pins[] = { + { pinmux[8], 2, 7 }, + { pinmux[9], 2, 0 } +}; + +/* I2C pin muxer settings */ +const struct pinmux_config i2c_pins[] = { + { pinmux[9], 2, 3 }, + { pinmux[9], 2, 4 } +}; + +int board_init(void) +{ +#ifndef CONFIG_USE_IRQ + /* + * Mask all IRQs by clearing the global enable and setting + * the enable clear for all the 90 interrupts. + */ + + writel(0, &davinci_aintc_regs->ger); + + writel(0, &davinci_aintc_regs->hier); + + writel(0xffffffff, &davinci_aintc_regs->ecr1); + writel(0xffffffff, &davinci_aintc_regs->ecr2); + writel(0xffffffff, &davinci_aintc_regs->ecr3); +#endif + + /* arch number of the board */ + gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA830_EVM; + + /* address of boot parameters */ + gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR; + + /* + * Power on required peripherals + * ARM does not have access by default to PSC0 and PSC1 + * assuming here that the DSP bootloader has set the IOPU + * such that PSC access is available to ARM + */ + lpsc_on(DAVINCI_LPSC_AEMIF); /* NAND, NOR */ + lpsc_on(DAVINCI_LPSC_SPI0); /* Serial Flash */ + lpsc_on(DAVINCI_LPSC_EMAC); /* image download */ + lpsc_on(DAVINCI_LPSC_UART2); /* console */ + lpsc_on(DAVINCI_LPSC_GPIO); + + /* setup the SUSPSRC for ARM to control emulation suspend */ + writel(readl(&davinci_syscfg_regs->suspsrc) & + ~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C | + DAVINCI_SYSCFG_SUSPSRC_SPI0 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 | + DAVINCI_SYSCFG_SUSPSRC_UART2), + &davinci_syscfg_regs->suspsrc); + +#ifdef CONFIG_SPI_FLASH + if (davinci_configure_pin_mux(spi0_pins, ARRAY_SIZE(spi0_pins)) != 0) + return 1; +#endif + + if (davinci_configure_pin_mux(uart_pins, ARRAY_SIZE(uart_pins)) != 0) + return 1; + + if (davinci_configure_pin_mux(i2c_pins, ARRAY_SIZE(i2c_pins)) != 0) + return 1; + + /* enable the console UART */ + writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST | + DAVINCI_UART_PWREMU_MGMT_UTRST), + &davinci_uart2_ctrl_regs->pwremu_mgmt); + + return(0); +} diff --git a/board/davinci/dm6467evm/dm6467evm.c b/board/davinci/dm6467evm/dm6467evm.c index ac3b282..994a9aa 100644 --- a/board/davinci/dm6467evm/dm6467evm.c +++ b/board/davinci/dm6467evm/dm6467evm.c @@ -18,6 +18,8 @@ #include <common.h> #include <asm/io.h> +#include <nand.h> +#include <asm/arch/nand_defs.h> DECLARE_GLOBAL_DATA_PTR; @@ -28,3 +30,12 @@ int board_init(void) return 0; } + +#ifdef CONFIG_NAND_DAVINCI +int board_nand_init(struct nand_chip *nand) +{ + davinci_nand_init(nand); + + return 0; +} +#endif diff --git a/board/eNET/config.mk b/board/eNET/config.mk index a763841..5c64804 100644 --- a/board/eNET/config.mk +++ b/board/eNET/config.mk @@ -22,3 +22,7 @@ # TEXT_BASE = 0x38040000 +CFLAGS_dlmalloc.o += -Wa,--no-warn -fno-strict-aliasing +PLATFORM_RELFLAGS += -fvisibility=hidden +PLATFORM_CPPFLAGS += -fno-dwarf2-cfi-asm +PLATFORM_LDFLAGS += -pic --emit-relocs -Bsymbolic -Bsymbolic-functions diff --git a/board/eNET/eNET.c b/board/eNET/eNET.c index 29cf295..6d0b15a 100644 --- a/board/eNET/eNET.c +++ b/board/eNET/eNET.c @@ -47,7 +47,6 @@ void init_sc520_enet (void) { /* Set CPU Speed to 100MHz */ sc520_mmcr->cpuctl = 0x01; - gd->cpu_clk = 100000000; /* wait at least one millisecond */ asm("movl $0x2000,%%ecx\n" @@ -67,7 +66,7 @@ void init_sc520_enet (void) /* * Miscellaneous platform dependent initializations */ -int board_init(void) +int board_early_init_f(void) { init_sc520_enet(); @@ -117,6 +116,14 @@ int board_init(void) sc520_mmcr->sysarbctl = 0x06; sc520_mmcr->sysarbmenb = 0x0003; + return 0; +} + +int board_early_init_r(void) +{ + /* CPU Speed to 100MHz */ + gd->cpu_clk = 100000000; + /* Crystal is 33.000MHz */ gd->bus_clk = 33000000; diff --git a/board/eNET/eNET_start16.S b/board/eNET/eNET_start16.S index 48e4d83..af2c132 100644 --- a/board/eNET/eNET_start16.S +++ b/board/eNET/eNET_start16.S @@ -71,6 +71,8 @@ board_init16: .section .bios, "ax" .code16 .globl realmode_reset +.hidden realmode_reset +.type realmode_reset, @function realmode_reset: /* Alias MMCR to 0xdf000 */ movw $0xfffc, %dx diff --git a/board/eNET/u-boot.lds b/board/eNET/u-boot.lds index 4ea424d..0d74021 100644 --- a/board/eNET/u-boot.lds +++ b/board/eNET/u-boot.lds @@ -28,28 +28,48 @@ ENTRY(_start) SECTIONS { . = 0x38040000; /* Location of bootcode in flash */ + _i386boot_text_start = .; .text : { *(.text); } . = ALIGN(4); .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } _i386boot_text_size = SIZEOF(.text) + SIZEOF(.rodata); + . = ALIGN(4); + + .data : { *(.data) } + . = ALIGN(4); + + .interp : { *(.interp) } + . = ALIGN(4); + + .dynsym : { *(.dynsym) } + . = ALIGN(4); - . = 0x03FF0000; /* Ram data segment to use */ - _i386boot_romdata_dest = ABSOLUTE(.); - .data : AT ( LOADADDR(.rodata) + SIZEOF(.rodata) ) { *(.data) } - _i386boot_romdata_start = LOADADDR(.data); + .dynstr : { *(.dynstr) } + . = ALIGN(4); + + .hash : { *(.hash) } + . = ALIGN(4); + .got : { *(.got) } . = ALIGN(4); - .got : AT ( LOADADDR(.data) + SIZEOF(.data) ) { *(.got) } + .got.plt : { *(.got.plt) } . = ALIGN(4); + + .dynamic (NOLOAD) : { *(.dynamic) } + . = ALIGN(4); + __u_boot_cmd_start = .; .u_boot_cmd : { *(.u_boot_cmd) } + . = ALIGN(4); __u_boot_cmd_end = .; _i386boot_cmd_start = LOADADDR(.u_boot_cmd); - _i386boot_romdata_size = SIZEOF(.data) + SIZEOF(.got) + SIZEOF(.u_boot_cmd); + _i386boot_rel_dyn_start = .; + .rel.dyn : { *(.rel.dyn) } + _i386boot_rel_dyn_end = .; . = ALIGN(4); _i386boot_bss_start = ABSOLUTE(.); @@ -57,7 +77,7 @@ SECTIONS _i386boot_bss_size = SIZEOF(.bss); /* 16bit realmode trampoline code */ - .realmode 0x7c0 : AT ( LOADADDR(.got) + SIZEOF(.got) + SIZEOF(.u_boot_cmd)) { *(.realmode) } + .realmode 0x7c0 : AT ( LOADADDR(.rel.dyn) + SIZEOF(.rel.dyn) ) { *(.realmode) } _i386boot_realmode = LOADADDR(.realmode); _i386boot_realmode_size = SIZEOF(.realmode); diff --git a/board/eric/Makefile b/board/eric/Makefile index 81a4552..c2a6872 100644 --- a/board/eric/Makefile +++ b/board/eric/Makefile @@ -33,7 +33,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/eric/u-boot.lds b/board/eric/u-boot.lds deleted file mode 100644 index 261ccfb..0000000 --- a/board/eric/u-boot.lds +++ /dev/null @@ -1,150 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/eric/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/adciop/u-boot.lds b/board/esd/adciop/u-boot.lds deleted file mode 100644 index 9207fe0..0000000 --- a/board/esd/adciop/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/apc405/u-boot.lds b/board/esd/apc405/u-boot.lds deleted file mode 100644 index 0799275..0000000 --- a/board/esd/apc405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/ar405/u-boot.lds b/board/esd/ar405/u-boot.lds deleted file mode 100644 index 2247109..0000000 --- a/board/esd/ar405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/ash405/u-boot.lds b/board/esd/ash405/u-boot.lds deleted file mode 100644 index 285c901..0000000 --- a/board/esd/ash405/u-boot.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/canbt/u-boot.lds b/board/esd/canbt/u-boot.lds deleted file mode 100644 index 2247109..0000000 --- a/board/esd/canbt/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/cms700/u-boot.lds b/board/esd/cms700/u-boot.lds deleted file mode 100644 index 0799275..0000000 --- a/board/esd/cms700/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/cpci2dp/u-boot.lds b/board/esd/cpci2dp/u-boot.lds deleted file mode 100644 index 0799275..0000000 --- a/board/esd/cpci2dp/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/cpci405/u-boot.lds b/board/esd/cpci405/u-boot.lds deleted file mode 100644 index 0799275..0000000 --- a/board/esd/cpci405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/cpciiser4/u-boot.lds b/board/esd/cpciiser4/u-boot.lds deleted file mode 100644 index 0799275..0000000 --- a/board/esd/cpciiser4/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/dasa_sim/config.mk b/board/esd/dasa_sim/config.mk index ae855dc..4fe3774 100644 --- a/board/esd/dasa_sim/config.mk +++ b/board/esd/dasa_sim/config.mk @@ -21,3 +21,6 @@ # MA 02111-1307 USA # TEXT_BASE = 0xFFFC0000 + +# Use board specific linker script +LDSCRIPT := $(SRCTREE)/board/esd/dasa_sim/u-boot.lds diff --git a/board/esd/dp405/u-boot.lds b/board/esd/dp405/u-boot.lds deleted file mode 100644 index 0799275..0000000 --- a/board/esd/dp405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/du405/u-boot.lds b/board/esd/du405/u-boot.lds deleted file mode 100644 index 65ad2f2..0000000 --- a/board/esd/du405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index d0e52cb..111cce5 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -360,165 +360,6 @@ int checkboard(void) return (0); } -/* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - */ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /* - * Set priority for all PLB3 devices to 0. - * Set PLB3 arbiter to fair mode. - */ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /* - * Set priority for all PLB4 devices to 0. - */ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /* - * Set Nebula PLB4 arbiter to fair mode. - */ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /* - * Set up Direct MMIO registers - */ - /* - * PowerPC440EPX PCI Master configuration. - * Map one 1Gig range of PLB/processor addresses to PCI memory space. - * PLB address 0xA0000000-0xDFFFFFFF - * ==> PCI address 0xA0000000-0xDFFFFFFF - * Use byte reversed out routines to handle endianess. - * Make this region non-prefetchable. - */ - out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ - /* - disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ - /* and enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ - /* - disabled b4 setting */ - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ - /* and enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /* - * Set up Configuration registers - */ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - PCI_VENDOR_ID_ESDGMBH); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, PCI_DEVICE_ID_DU440); - - pci_write_config_word(0, PCI_CLASS_SUB_CODE, PCI_CLASS_BRIDGE_HOST); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /* - * Write the PowerPC440 EP PCI Configuration regs. - * Enable PowerPC440 EP to be a master on the PCI bus (PMM). - * Enable PowerPC440 EP to act as a PCI memory target (PTM). - */ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - -/* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - */ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - int last_stage_init(void) { int e, i; diff --git a/board/esd/du440/du440.h b/board/esd/du440/du440.h index a124a7e..37697ec 100644 --- a/board/esd/du440/du440.h +++ b/board/esd/du440/du440.h @@ -38,6 +38,3 @@ #define PWR_RDY 0x10 #define CPLD_IRQ (32+30) - -#define PCI_VENDOR_ID_ESDGMBH 0x12fe -#define PCI_DEVICE_ID_DU440 0x0444 diff --git a/board/esd/du440/u-boot.lds b/board/esd/du440/u-boot.lds deleted file mode 100644 index 3b6c096..0000000 --- a/board/esd/du440/u-boot.lds +++ /dev/null @@ -1,139 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/hh405/u-boot.lds b/board/esd/hh405/u-boot.lds deleted file mode 100644 index 0799275..0000000 --- a/board/esd/hh405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/hub405/u-boot.lds b/board/esd/hub405/u-boot.lds deleted file mode 100644 index 285c901..0000000 --- a/board/esd/hub405/u-boot.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c index 5139358..748ad7c 100644 --- a/board/esd/mecp5123/mecp5123.c +++ b/board/esd/mecp5123/mecp5123.c @@ -273,6 +273,5 @@ int checkboard(void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/esd/ocrtc/u-boot.lds b/board/esd/ocrtc/u-boot.lds deleted file mode 100644 index 34884b6..0000000 --- a/board/esd/ocrtc/u-boot.lds +++ /dev/null @@ -1,147 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/pci405/u-boot.lds b/board/esd/pci405/u-boot.lds deleted file mode 100644 index 0799275..0000000 --- a/board/esd/pci405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/plu405/Makefile b/board/esd/plu405/Makefile index c57d90c..98acb4b 100644 --- a/board/esd/plu405/Makefile +++ b/board/esd/plu405/Makefile @@ -31,7 +31,6 @@ LIB = $(obj)lib$(BOARD).a COBJS = $(BOARD).o flash.o \ ../common/misc.o \ ../common/esd405ep_nand.o \ - ../common/auto_update.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index c733587..fcffdf6 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -46,50 +46,6 @@ const unsigned char fpgadata[] = */ #include "../common/fpga.c" -/* - * include common auto-update code (for esd boards) - */ -#include "../common/auto_update.h" - -au_image_t au_image[] = { - {"plu405/preinst.img", 0, -1, AU_SCRIPT}, - {"plu405/u-boot.img", 0xfffc0000, 0x00040000, AU_FIRMWARE}, - {"plu405/pImage_${bd_type}", 0x00000000, 0x00100000, AU_NAND}, - {"plu405/pImage.initrd", 0x00100000, 0x00200000, AU_NAND}, - {"plu405/yaffsmt2.img", 0x00300000, 0x01c00000, AU_NAND}, - {"plu405/postinst.img", 0, 0, AU_SCRIPT}, -}; - -int N_AU_IMAGES = (sizeof(au_image) / sizeof(au_image[0])); - -/* - * generate a short spike on the CAN tx line - * to bring the couplers in sync - */ -void init_coupler(u32 addr) -{ - struct sja1000_basic_s *ctrl = (struct sja1000_basic_s *)addr; - - /* reset */ - out_8(&ctrl->cr, CR_RR); - - /* dominant */ - out_8(&ctrl->btr0, 0x00); /* btr setup is required */ - out_8(&ctrl->btr1, 0x14); /* we use 1Mbit/s */ - out_8(&ctrl->oc, OC_TP1 | OC_TN1 | OC_POL1 | - OC_TP0 | OC_TN0 | OC_POL0 | OC_MODE1); - out_8(&ctrl->cr, 0x00); - - /* delay */ - in_8(&ctrl->cr); - in_8(&ctrl->cr); - in_8(&ctrl->cr); - in_8(&ctrl->cr); - - /* reset */ - out_8(&ctrl->cr, CR_RR); -} - /* Prototypes */ int gunzip(void *, int, unsigned char *, unsigned long *); diff --git a/board/esd/plu405/u-boot.lds b/board/esd/plu405/u-boot.lds deleted file mode 100644 index 285c901..0000000 --- a/board/esd/plu405/u-boot.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/pmc405/u-boot.lds b/board/esd/pmc405/u-boot.lds deleted file mode 100644 index 178a755..0000000 --- a/board/esd/pmc405/u-boot.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/pmc405de/u-boot.lds b/board/esd/pmc405de/u-boot.lds deleted file mode 100644 index 0799275..0000000 --- a/board/esd/pmc405de/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/pmc440/config.mk b/board/esd/pmc440/config.mk index 0c4d582..91e65ec 100644 --- a/board/esd/pmc440/config.mk +++ b/board/esd/pmc440/config.mk @@ -20,10 +20,6 @@ # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA # -# -# AMCC 440EPx Reference Platform (Sequoia) board -# - sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp ifndef TEXT_BASE diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index ec92552..bd43a9a 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -39,6 +39,8 @@ #include <miiphy.h> #endif #include <serial.h> +#include <asm/4xx_pci.h> + #include "fpga.h" #include "pmc440.h" @@ -478,7 +480,7 @@ int checkboard(void) /* * Assign interrupts to PCI devices. Some OSs rely on this. */ -void pmc440_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { unsigned char int_line[] = {IRQ_PCIC, IRQ_PCID, IRQ_PCIA, IRQ_PCIB}; @@ -488,64 +490,6 @@ void pmc440_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) #endif /* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - */ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /* - * Set priority for all PLB3 devices to 0. - * Set PLB3 arbiter to fair mode. - */ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /* - * Set priority for all PLB4 devices to 0. - */ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /* - * Set Nebula PLB4 arbiter to fair mode. - */ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - -#ifdef CONFIG_PCI_PNP - hose->fixup_irq = pmc440_pci_fixup_irq; -#endif - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/* * pci_target_init * * The bootstrap configuration provides default settings for the pci @@ -658,24 +602,16 @@ void pci_target_init(struct pci_controller *hose) #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ /* - * pci_master_init + * Override weak default pci_master_init() */ #if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) void pci_master_init(struct pci_controller *hose) { - unsigned short temp_short; - /* - * Write the PowerPC440 EP PCI Configuration regs. - * Enable PowerPC440 EP to be a master on the PCI bus (PMM). - * Enable PowerPC440 EP to act as a PCI memory target (PTM). + * Only configure the master in monach mode */ - if (is_monarch()) { - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); - } + if (is_monarch()) + __pci_master_init(hose); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ @@ -712,7 +648,7 @@ static void wait_for_pci_ready(void) } /* - * is_pci_host + * Override weak is_pci_host() * * This routine is called to determine if a pci scan should be * performed. With various hardware environments (especially cPCI and @@ -741,17 +677,6 @@ int is_pci_host(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) */ -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ - #ifdef CONFIG_RESET_PHY_R void reset_phy(void) { diff --git a/board/esd/pmc440/u-boot.lds b/board/esd/pmc440/u-boot.lds deleted file mode 100644 index 3b6c096..0000000 --- a/board/esd/pmc440/u-boot.lds +++ /dev/null @@ -1,139 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/voh405/u-boot.lds b/board/esd/voh405/u-boot.lds deleted file mode 100644 index 0799275..0000000 --- a/board/esd/voh405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/vom405/u-boot.lds b/board/esd/vom405/u-boot.lds deleted file mode 100644 index 0799275..0000000 --- a/board/esd/vom405/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/esd/wuh405/u-boot.lds b/board/esd/wuh405/u-boot.lds deleted file mode 100644 index 285c901..0000000 --- a/board/esd/wuh405/u-boot.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/exbitgen/u-boot.lds b/board/exbitgen/u-boot.lds deleted file mode 100644 index d2b28e1..0000000 --- a/board/exbitgen/u-boot.lds +++ /dev/null @@ -1,149 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/exbitgen/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ - common/env_embedded.o(.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - . = ALIGN(4); - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/faraday/a320evb/Makefile b/board/faraday/a320evb/Makefile new file mode 100644 index 0000000..74f660d --- /dev/null +++ b/board/faraday/a320evb/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := a320evb.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/faraday/a320evb/a320evb.c b/board/faraday/a320evb/a320evb.c new file mode 100644 index 0000000..85b11b9 --- /dev/null +++ b/board/faraday/a320evb/a320evb.c @@ -0,0 +1,73 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <ratbert@faraday-tech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <netdev.h> +#include <asm/io.h> + +#include <asm/arch/ftsmc020.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Miscellaneous platform dependent initialisations + */ + +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE_FARADAY; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + ftsmc020_init(); /* initialize Flash */ + return 0; +} + +int dram_init(void) +{ + unsigned long sdram_base = PHYS_SDRAM_1; + unsigned long expected_size = PHYS_SDRAM_1_SIZE; + unsigned long actual_size; + + actual_size = get_ram_size((void *)sdram_base, expected_size); + + gd->bd->bi_dram[0].start = sdram_base; + gd->bd->bi_dram[0].size = actual_size; + + if (expected_size != actual_size) + printf("Warning: Only %lu of %lu MiB SDRAM is working\n", + actual_size >> 20, expected_size >> 20); + + return 0; +} + +int board_eth_init(bd_t *bd) +{ + return ftmac100_initialize(bd); +} + +ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) +{ + if (banknum == 0) { /* non-CFI boot flash */ + info->portwidth = FLASH_CFI_8BIT; + info->chipwidth = FLASH_CFI_BY8; + info->interface = FLASH_CFI_X8; + return 1; + } else + return 0; +} diff --git a/board/faraday/a320evb/config.mk b/board/faraday/a320evb/config.mk new file mode 100644 index 0000000..aa25b98 --- /dev/null +++ b/board/faraday/a320evb/config.mk @@ -0,0 +1,35 @@ +# +# (C) Copyright 2009 Faraday Technology +# Po-Yu Chuang <ratbert@faraday-tech.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# Faraday A320 board with FA526/FA626TE/ARM926EJ-S cpus +# +# see http://www.faraday-tech.com/ for more information + +# A320 has 1 bank of 64 MB DRAM +# +# 1000'0000 to 1400'0000 +# +# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 +# +# we load ourself to 13f8'0000 +# +# download area is 1200'0000 + +TEXT_BASE = 0x13f80000 diff --git a/board/faraday/a320evb/lowlevel_init.S b/board/faraday/a320evb/lowlevel_init.S new file mode 100644 index 0000000..97718c0 --- /dev/null +++ b/board/faraday/a320evb/lowlevel_init.S @@ -0,0 +1,118 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <ratbert@faraday-tech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <config.h> +#include <version.h> + +#include <asm/macro.h> +#include <asm/arch/ftsdmc020.h> + +/* + * parameters for the SDRAM controller + */ +#define TP0_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_TP0) +#define TP1_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_TP1) +#define CR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_CR) +#define B0_BSR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_BANK0_BSR) +#define ACR_A (CONFIG_FTSDMC020_BASE + FTSDMC020_OFFSET_ACR) + +#define TP0_D CONFIG_SYS_FTSDMC020_TP0 +#define TP1_D CONFIG_SYS_FTSDMC020_TP1 +#define CR_D1 FTSDMC020_CR_IPREC +#define CR_D2 FTSDMC020_CR_ISMR +#define CR_D3 FTSDMC020_CR_IREF + +#define B0_BSR_D (CONFIG_SYS_FTSDMC020_BANK0_BSR | \ + FTSDMC020_BANK_BASE(PHYS_SDRAM_1)) +#define ACR_D FTSDMC020_ACR_TOC(0x18) + +/* + * numeric 7 segment display + */ +.macro led, num + write32 CONFIG_DEBUG_LED, \num +.endm + +/* + * Waiting for SDRAM to set up + */ +.macro wait_sdram + ldr r0, =CONFIG_FTSDMC020_BASE +1: + ldr r1, [r0, #FTSDMC020_OFFSET_CR] + cmp r1, #0 + bne 1b +.endm + +.globl lowlevel_init +lowlevel_init: + mov r11, lr + + led 0x0 + + bl init_sdmc + + led 0x1 + + /* everything is fine now */ + mov lr, r11 + mov pc, lr + +/* + * memory initialization + */ +init_sdmc: + led 0x10 + + /* set SDRAM register */ + + write32 TP0_A, TP0_D + led 0x11 + + write32 TP1_A, TP1_D + led 0x12 + + /* set to precharge */ + write32 CR_A, CR_D1 + led 0x13 + + wait_sdram + led 0x14 + + /* set mode register */ + write32 CR_A, CR_D2 + led 0x15 + + wait_sdram + led 0x16 + + /* set to refresh */ + write32 CR_A, CR_D3 + led 0x17 + + wait_sdram + led 0x18 + + write32 B0_BSR_A, B0_BSR_D + led 0x19 + + write32 ACR_A, ACR_D + led 0x1a + + mov pc, lr diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c index 2fa3650..2e13ea8 100644 --- a/board/freescale/mpc5121ads/mpc5121ads.c +++ b/board/freescale/mpc5121ads/mpc5121ads.c @@ -350,6 +350,5 @@ int checkboard (void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c index cb13829..0c4fd68 100644 --- a/board/freescale/mpc8313erdb/sdram.c +++ b/board/freescale/mpc8313erdb/sdram.c @@ -72,7 +72,7 @@ static long fixed_sdram(void) * Erratum DDR3 requires a 50ms delay after clearing DDRCDR[DDR_cfg], * or the DDR2 controller may fail to initialize correctly. */ - udelay(50000); + __udelay(50000); im->ddr.csbnds[0].csbnds = (msize - 1) >> 24; im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG; diff --git a/board/g2000/u-boot.lds b/board/g2000/u-boot.lds deleted file mode 100644 index 0799275..0000000 --- a/board/g2000/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/gdsys/dlvision/u-boot.lds b/board/gdsys/dlvision/u-boot.lds deleted file mode 100644 index 689c808..0000000 --- a/board/gdsys/dlvision/u-boot.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/gdsys/gdppc440etx/gdppc440etx.c b/board/gdsys/gdppc440etx/gdppc440etx.c index 90dbe52..ecbc3c3 100644 --- a/board/gdsys/gdppc440etx/gdppc440etx.c +++ b/board/gdsys/gdppc440etx/gdppc440etx.c @@ -29,6 +29,7 @@ #include <ppc4xx.h> #include <asm/processor.h> #include <asm/io.h> +#include <asm/4xx_pci.h> DECLARE_GLOBAL_DATA_PTR; @@ -158,55 +159,13 @@ int checkboard(void) } /* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * + * Override weak pci_pre_init() */ #if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller *hose) { - unsigned long addr; - - /* - * Set priority for all PLB3 devices to 0. - * Set PLB3 arbiter to fair mode. - */ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /* - * Set priority for all PLB4 devices to 0. - */ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /* - * Set Nebula PLB4 arbiter to fair mode. - */ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); + /* First call common code */ + __pci_pre_init(hose); /* enable 66 MHz ext. Clock */ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x00008000); @@ -215,109 +174,3 @@ int pci_pre_init(struct pci_controller *hose) return 1; } #endif /* defined(CONFIG_PCI) */ - -/* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /* - * Set up Direct MMIO registers - */ - - /* - * PowerPC440 EP PCI Master configuration. - * Map one 1Gig range of PLB/processor addresses to PCI memory space. - * PLB address 0xA0000000-0xDFFFFFFF - * ==> PCI address 0xA0000000-0xDFFFFFFF - * Use byte reversed out routines to handle endianess. - * Make this region non-prefetchable. - */ - out32r(PCIL0_PMM0MA, 0x00000000); /* disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); - out32r(PCIL0_PMM0PCIHA, 0x00000000); - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M, no prefetch, enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* disabled b4 setting */ - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); - out32r(PCIL0_PMM1PCIHA, 0x00000000); - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M, no prefetch, enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); - out32r(PCIL0_PTM1LA, 0); - out32r(PCIL0_PTM2MS, 0); - out32r(PCIL0_PTM2LA, 0); - - /* - * Set up Configuration registers - */ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -/* - * pci_master_init - * - */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /* - * Write the PowerPC440 EP PCI Configuration regs. - * Enable PowerPC440 EP to be a master on the PCI bus (PMM). - * Enable PowerPC440 EP to act as a PCI memory target (PTM). - */ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - -/* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - */ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - return 1; -} -#endif /* defined(CONFIG_PCI) */ diff --git a/board/gdsys/gdppc440etx/u-boot.lds b/board/gdsys/gdppc440etx/u-boot.lds deleted file mode 100644 index 6ab36ee..0000000 --- a/board/gdsys/gdppc440etx/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/gdsys/gdppc440etx/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/gdsys/intip/intip.c b/board/gdsys/intip/intip.c index b42e908..23a10c4 100644 --- a/board/gdsys/intip/intip.c +++ b/board/gdsys/intip/intip.c @@ -141,64 +141,6 @@ int checkboard(void) return 0; } -/* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /* - * Disable everything - */ - out_le32((void *)PCIL0_PIM0SA, 0); /* disable */ - out_le32((void *)PCIL0_PIM1SA, 0); /* disable */ - out_le32((void *)PCIL0_PIM2SA, 0); /* disable */ - out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */ - - /* - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 - * strapping options to not support sizes such as 128/256 MB. - */ - out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out_le32((void *)PCIL0_PIM0LAH, 0); - out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); - out_le32((void *)PCIL0_BAR0, 0); - - /* - * Program the board's subsystem id/vendor id - */ - out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - - out_le16((void *)PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -#if defined(CONFIG_PCI) -/* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - */ -int is_pci_host(struct pci_controller *hose) -{ - /* Board is always configured as host. */ - return 1; -} -#endif /* CONFIG_PCI */ - int board_early_init_r(void) { /* diff --git a/board/gdsys/intip/u-boot.lds b/board/gdsys/intip/u-boot.lds deleted file mode 100644 index 624c4c1..0000000 --- a/board/gdsys/intip/u-boot.lds +++ /dev/null @@ -1,143 +0,0 @@ -/* - * (C) Copyright 2008 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/gdsys/intip/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/gdsys/neo/u-boot.lds b/board/gdsys/neo/u-boot.lds deleted file mode 100644 index 75202ca..0000000 --- a/board/gdsys/neo/u-boot.lds +++ /dev/null @@ -1,129 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/gen860t/gen860t.c b/board/gen860t/gen860t.c index 008f765..b37a0f2 100644 --- a/board/gen860t/gen860t.c +++ b/board/gen860t/gen860t.c @@ -292,14 +292,3 @@ void board_poweroff (void) puts ("### Please power off the board ###\n"); while (1); } - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed (void) -{ - return 0; /* No hotkeys supported */ -} -#endif diff --git a/board/ipek01/Makefile b/board/ipek01/Makefile new file mode 100644 index 0000000..ddfd2ef --- /dev/null +++ b/board/ipek01/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2003-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ipek01/config.mk b/board/ipek01/config.mk new file mode 100644 index 0000000..c8ecb29 --- /dev/null +++ b/board/ipek01/config.mk @@ -0,0 +1,30 @@ +# +# (C) Copyright 2003-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# IPEK01 board +# + +TEXT_BASE = 0xfc000000 + +PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board diff --git a/board/ipek01/ipek01.c b/board/ipek01/ipek01.c new file mode 100644 index 0000000..463a81b --- /dev/null +++ b/board/ipek01/ipek01.c @@ -0,0 +1,282 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2006 + * MicroSys GmbH + * + * (C) Copyright 2009 + * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc5xxx.h> +#include <pci.h> +#include <netdev.h> +#include <miiphy.h> +#include <libfdt.h> +#include <mb862xx.h> +#include <video_fb.h> +#include <asm/processor.h> +#include <asm/io.h> + +#ifdef CONFIG_OF_LIBFDT +#include <fdt_support.h> +#endif /* CONFIG_OF_LIBFDT */ + +/* mt46v16m16-75 */ +#ifdef CONFIG_MPC5200_DDR +/* Settings for XLB = 132 MHz */ +#define SDRAM_MODE 0x018D0000 +#define SDRAM_EMODE 0x40090000 +#define SDRAM_CONTROL 0x714f0f00 +#define SDRAM_CONFIG1 0x73722930 +#define SDRAM_CONFIG2 0x47770000 +#define SDRAM_TAPDELAY 0x10000000 +#else +#error SDRAM is not supported on this board +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static void sdram_start (int hi_addr) +{ + struct mpc5xxx_sdram *sdram = (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000000 | hi_addr_bit); + + /* precharge all banks */ + out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit); + + /* set mode register: extended mode */ + out_be32 (&sdram->mode, SDRAM_EMODE); + + /* set mode register: reset DLL */ + out_be32 (&sdram->mode, SDRAM_MODE | 0x04000000); + + /* precharge all banks */ + out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit); + + /* auto refresh */ + out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000004 | hi_addr_bit); + + /* set mode register */ + out_be32 (&sdram->mode, SDRAM_MODE); + + /* normal operation */ + out_be32 (&sdram->ctrl, SDRAM_CONTROL | hi_addr_bit); +} + +/* + * ATTENTION: Although partially referenced initdram does NOT make real + * use of CONFIG_SYS_SDRAM_BASE. The code does not work if + * CONFIG_SYS_SDRAM_BASE is something else than 0x00000000. + */ + +phys_size_t initdram (int board_type) +{ + struct mpc5xxx_mmap_ctl *mmap_ctl = + (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; + struct mpc5xxx_sdram *sdram = (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; + struct mpc5xxx_cdm *cdm = (struct mpc5xxx_cdm *)MPC5XXX_CDM; + ulong dramsize = 0; + ulong dramsize2 = 0; + ulong test1, test2; + + /* setup SDRAM chip selects */ + out_be32 (&mmap_ctl->sdram0, 0x0000001e); /* 2G at 0x0 */ + out_be32 (&mmap_ctl->sdram1, 0x00000000); /* disabled */ + + /* setup config registers */ + out_be32 (&sdram->config1, SDRAM_CONFIG1); + out_be32 (&sdram->config2, SDRAM_CONFIG2); + + /* set tap delay */ + out_be32 (&cdm->porcfg, SDRAM_TAPDELAY); + + /* find RAM size using SDRAM CS0 only */ + sdram_start (0); + test1 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); + sdram_start (1); + test2 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); + if (test1 > test2) { + sdram_start (0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) + dramsize = 0; + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) + out_be32 (&mmap_ctl->sdram0, + 0x13 + __builtin_ffs (dramsize >> 20) - 1); + else + out_be32 (&mmap_ctl->sdram1, 0); /* disabled */ + + /* + * On MPC5200B we need to set the special configuration delay in the + * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM + * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: + * + * "The SDelay should be written to a value of 0x00000004. It is + * required to account for changes caused by normal wafer processing + * parameters." + */ + out_be32 (&sdram->sdelay, 0x04); + + return dramsize + dramsize2; +} + +int checkboard (void) +{ + puts ("Board: IPEK01 \n"); + return 0; +} + +void flash_preinit (void) +{ + struct mpc5xxx_lpb *lpb = (struct mpc5xxx_lpb *)MPC5XXX_LPB; + + /* + * Now, when we are in RAM, enable flash write + * access for detection process. + * Note that CS_BOOT cannot be cleared when + * executing in flash. + */ + clrbits_be32 (&lpb->cs0_cfg, 0x1); /* clear RO */ +} + +void flash_afterinit (ulong start, ulong size) +{ + struct mpc5xxx_mmap_ctl *mmap_ctl = + (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; + +#if defined(CONFIG_BOOT_ROM) + /* adjust mapping */ + out_be32 (&mmap_ctl->cs1_start, START_REG (start)); + out_be32 (&mmap_ctl->cs1_stop, STOP_REG (start, size)); +#else + /* adjust mapping */ + out_be32 (&mmap_ctl->boot_start, START_REG (start)); + out_be32 (&mmap_ctl->cs0_start, START_REG (start)); + out_be32 (&mmap_ctl->boot_stop, STOP_REG (start, size)); + out_be32 (&mmap_ctl->cs0_stop, STOP_REG (start, size)); +#endif +} + +extern flash_info_t flash_info[]; /* info for FLASH chips */ + +int misc_init_r (void) +{ + /* adjust flash start */ + gd->bd->bi_flashstart = flash_info[0].start[0]; + return (0); +} + +#ifdef CONFIG_PCI +static struct pci_controller hose; + +extern void pci_mpc5xxx_init (struct pci_controller *); + +void pci_init_board (void) +{ + pci_mpc5xxx_init (&hose); +} +#endif + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup (void *blob, bd_t * bd) +{ + ft_cpu_setup (blob, bd); + fdt_fixup_memory (blob, (u64) bd->bi_memstart, (u64) bd->bi_memsize); +} +#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ + +int board_eth_init(bd_t *bis) +{ + cpu_eth_init(bis); /* Built in FEC comes first */ + return pci_eth_init(bis); +} + +#ifdef CONFIG_VIDEO +extern GraphicDevice mb862xx; + +static const gdc_regs init_regs[] = { + {0x0100, 0x00000900}, + {0x0020, 0x80190257}, + {0x0024, 0x00000000}, + {0x0028, 0x00000000}, + {0x002c, 0x00000000}, + {0x0110, 0x00000000}, + {0x0114, 0x00000000}, + {0x0118, 0x02570320}, + {0x0004, 0x041f0000}, + {0x0008, 0x031f031f}, + {0x000c, 0x067f0347}, + {0x0010, 0x02780000}, + {0x0014, 0x0257025c}, + {0x0018, 0x00000000}, + {0x001c, 0x02570320}, + {0x0100, 0x80010900}, + {0x0, 0x0} +}; + +const gdc_regs *board_get_regs (void) +{ + return init_regs; +} + +/* Returns Lime base address */ +unsigned int board_video_init (void) +{ + if (mb862xx_probe (CONFIG_SYS_LIME_BASE) != MB862XX_TYPE_LIME) + return 0; + + mb862xx.winSizeX = 800; + mb862xx.winSizeY = 600; + mb862xx.gdfIndex = GDF_15BIT_555RGB; + mb862xx.gdfBytesPP = 2; + + return CONFIG_SYS_LIME_BASE; +} + +#if defined(CONFIG_CONSOLE_EXTRA_INFO) +/* + * Return text to be printed besides the logo. + */ +void video_get_info_str (int line_number, char *info) +{ + if (line_number == 1) + strcpy (info, " Board: IPEK01"); + else + info[0] = '\0'; +} +#endif +#endif /* CONFIG_VIDEO */ diff --git a/board/jse/Makefile b/board/jse/Makefile index 6be03ac..fc71601 100644 --- a/board/jse/Makefile +++ b/board/jse/Makefile @@ -33,7 +33,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/jse/u-boot.lds b/board/jse/u-boot.lds deleted file mode 100644 index 6d0a21c..0000000 --- a/board/jse/u-boot.lds +++ /dev/null @@ -1,140 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : { - /* The start.o file includes the initial jump vector that - must be located in the beginning. It is the basic run- - time function that calls all other functions. */ - cpu/ppc4xx/start.o (.text) - - board/jse/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/korat/korat.c b/board/korat/korat.c index 8c674a2..d5260dc 100644 --- a/board/korat/korat.c +++ b/board/korat/korat.c @@ -35,6 +35,7 @@ #include <asm/io.h> #include <asm/ppc4xx-uic.h> #include <asm/processor.h> +#include <asm/4xx_pci.h> DECLARE_GLOBAL_DATA_PTR; @@ -594,71 +595,13 @@ int checkboard(void) /* * Assign interrupts to PCI devices. */ -void korat_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) +void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) { pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIRQ2); } #endif /* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - */ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /* - * Set priority for all PLB3 devices to 0. - * Set PLB3 arbiter to fair mode. - */ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /* - * Set priority for all PLB4 devices to 0. - */ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /* - * Set Nebula PLB4 arbiter to fair mode. - */ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - -#if defined(CONFIG_PCI_PNP) - hose->fixup_irq = korat_pci_fixup_irq; -#endif - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/* * pci_target_init * * The bootstrap configuration provides default settings for the pci @@ -668,60 +611,8 @@ int pci_pre_init(struct pci_controller *hose) #if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { - /* - * Set up Direct MMIO registers - */ - /* - * PowerPC440EPX PCI Master configuration. - * Map one 1Gig range of PLB/processor addresses to PCI memory space. - * PLB address 0x80000000-0xBFFFFFFF - * ==> PCI address 0x80000000-0xBFFFFFFF - * Use byte reversed out routines to handle endianess. - * Make this region non-prefetchable. - */ - out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ - /* - disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_PMM0PCILA, - CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ - /* and enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ - /* - disabled b4 setting */ - out32r(PCIL0_PMM1LA, - CONFIG_SYS_PCI_MEMBASE + 0x20000000); /* PMM0 Local Address */ - out32r(PCIL0_PMM1PCILA, - CONFIG_SYS_PCI_MEMBASE + 0x20000000); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ - /* and enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /* - * Set up Configuration registers - */ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); + /* First do 440EP(x) common setup */ + __pci_target_init(hose); /* * Set up Configuration registers for on-board NEC uPD720101 USB @@ -731,55 +622,6 @@ void pci_target_init(struct pci_controller *hose) } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /* - * Write the PowerPC440 EP PCI Configuration regs. - * Enable PowerPC440 EP to be a master on the PCI bus (PMM). - * Enable PowerPC440 EP to act as a PCI memory target (PTM). - */ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif - -/* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - */ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* Korat is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ - #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/korat/u-boot.lds b/board/korat/u-boot.lds deleted file mode 100644 index b9ec56b..0000000 --- a/board/korat/u-boot.lds +++ /dev/null @@ -1,142 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/kup/common/kup.c b/board/kup/common/kup.c index fec5407..2418d59 100644 --- a/board/kup/common/kup.c +++ b/board/kup/common/kup.c @@ -70,14 +70,3 @@ void poweron_key (void) else setenv ("key1", "on"); } - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed (void) -{ - return (0); -} -#endif diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index ef7f2e8..415e036 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -275,166 +275,6 @@ int checkboard(void) return (0); } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB3 devices to 0. - | Set PLB3 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB4 devices to 0. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /*-------------------------------------------------------------------------+ - | Set Nebula PLB4 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Set up Direct MMIO registers - *--------------------------------------------------------------------------*/ - /*--------------------------------------------------------------------------+ - | PowerPC440EPX PCI Master configuration. - | Map one 1Gig range of PLB/processor addresses to PCI memory space. - | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF - | Use byte reversed out routines to handle endianess. - | Make this region non-prefetchable. - +--------------------------------------------------------------------------*/ - out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /*--------------------------------------------------------------------------+ - * Set up Configuration registers - *--------------------------------------------------------------------------*/ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -/************************************************************************* - * pci_master_init - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /*--------------------------------------------------------------------------+ - | Write the PowerPC440 EP PCI Configuration regs. - | Enable PowerPC440 EP to be a master on the PCI bus (PMM). - | Enable PowerPC440 EP to act as a PCI memory target (PTM). - +--------------------------------------------------------------------------*/ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* Cactus is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - void hw_watchdog_reset(void) { int val; @@ -532,13 +372,6 @@ unsigned int board_video_init (void) udelay(500); gpio_write_bit(CONFIG_SYS_GPIO_LIME_RST, 1); - /* Lime memory clock adjusted to 100MHz */ - out_be32((void *)CONFIG_SYS_LIME_SDRAM_CLOCK, CONFIG_SYS_LIME_CLOCK_100MHZ); - /* Wait untill time expired. Because of requirements in lime manual */ - udelay(300); - /* Write lime controller memory parameters */ - out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_LIME_MMR_VALUE); - mb862xx.winSizeX = 640; mb862xx.winSizeY = 480; mb862xx.gdfBytesPP = 2; diff --git a/board/lwmon5/u-boot.lds b/board/lwmon5/u-boot.lds deleted file mode 100644 index b9ec56b..0000000 --- a/board/lwmon5/u-boot.lds +++ /dev/null @@ -1,142 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFF8000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/matrix_vision/mvbc_p/mvbc_p.c b/board/matrix_vision/mvbc_p/mvbc_p.c index 0cbe900..4392176 100644 --- a/board/matrix_vision/mvbc_p/mvbc_p.c +++ b/board/matrix_vision/mvbc_p/mvbc_p.c @@ -262,7 +262,6 @@ void show_boot_progress(int val) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } int board_eth_init(bd_t *bis) diff --git a/board/ml2/Makefile b/board/ml2/Makefile index 2a93666..59644db 100644 --- a/board/ml2/Makefile +++ b/board/ml2/Makefile @@ -33,7 +33,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/ml2/config.mk b/board/ml2/config.mk index 41118d5..5e0bdae 100644 --- a/board/ml2/config.mk +++ b/board/ml2/config.mk @@ -27,3 +27,6 @@ #TEXT_BASE = 0xFFFE0000 TEXT_BASE = 0x18000000 + +# Use board specific linker script +LDSCRIPT := $(SRCTREE)/board/ml2/u-boot.lds diff --git a/board/mpl/mip405/Makefile b/board/mpl/mip405/Makefile index 53bf846..18a8d86 100644 --- a/board/mpl/mip405/Makefile +++ b/board/mpl/mip405/Makefile @@ -38,7 +38,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index 495e9bd..af3a98a 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -706,17 +706,6 @@ void print_mip405_rev (void) } -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif - extern int mk_date (char *, struct rtc_time *); int last_stage_init (void) diff --git a/board/mpl/mip405/u-boot.lds b/board/mpl/mip405/u-boot.lds deleted file mode 100644 index cc8bed0..0000000 --- a/board/mpl/mip405/u-boot.lds +++ /dev/null @@ -1,154 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - .bootpg 0xFFFFF000 : - { - board/mpl/mip405/init.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/mpl/mip405/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/mpl/pip405/Makefile b/board/mpl/pip405/Makefile index 590c7da..774b59f 100644 --- a/board/mpl/pip405/Makefile +++ b/board/mpl/pip405/Makefile @@ -41,7 +41,7 @@ OBJS := $(addprefix $(obj),$(COBJS)) SOBJS := $(addprefix $(obj),$(SOBJS)) $(LIB): $(OBJS) $(SOBJS) - $(AR) $(ARFLAGS) $@ $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) clean: rm -f $(SOBJS) $(OBJS) diff --git a/board/mpl/pip405/u-boot.lds b/board/mpl/pip405/u-boot.lds deleted file mode 100644 index 92290d8..0000000 --- a/board/mpl/pip405/u-boot.lds +++ /dev/null @@ -1,149 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/mpl/pip405/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c index 4d8b579..1835677 100644 --- a/board/mpl/vcma9/vcma9.c +++ b/board/mpl/vcma9/vcma9.c @@ -27,7 +27,7 @@ #include <common.h> #include <netdev.h> -#include <s3c2410.h> +#include <asm/arch/s3c24x0_cpu.h> #include <stdio_dev.h> #include <i2c.h> diff --git a/board/mpl/vcma9/vcma9.h b/board/mpl/vcma9/vcma9.h index f46e0e4..94fd2fa 100644 --- a/board/mpl/vcma9/vcma9.h +++ b/board/mpl/vcma9/vcma9.h @@ -25,7 +25,7 @@ * Global routines used for VCMA9 *****************************************************************************/ -#include <s3c2410.h> +#include <asm/arch/s3c24x0_cpu.h> extern int mem_test(unsigned long start, unsigned long ramsize,int mode); @@ -118,13 +118,13 @@ static inline u32 NF_Read_ECC(void) /* VCMA9 PLD regsiters */ typedef struct { - S3C24X0_REG8 ID; - S3C24X0_REG8 NIC; - S3C24X0_REG8 CAN; - S3C24X0_REG8 MISC; - S3C24X0_REG8 GPCD; - S3C24X0_REG8 BOARD; - S3C24X0_REG8 SDRAM; + u8 ID; + u8 NIC; + u8 CAN; + u8 MISC; + u8 GPCD; + u8 BOARD; + u8 SDRAM; } /*__attribute__((__packed__))*/ VCMA9_PLD; #define VCMA9_PLD_BASE 0x2C000100 diff --git a/board/mucmc52/mucmc52.c b/board/mucmc52/mucmc52.c index b4ed735..66973f0 100644 --- a/board/mucmc52/mucmc52.c +++ b/board/mucmc52/mucmc52.c @@ -404,6 +404,5 @@ void pci_init_board (void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/netstal/hcu4/hcu4.c b/board/netstal/hcu4/hcu4.c index ba3e9c3..8efbc23 100644 --- a/board/netstal/hcu4/hcu4.c +++ b/board/netstal/hcu4/hcu4.c @@ -174,17 +174,6 @@ phys_size_t initdram(int board_type) return dram_size; } -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ - #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/netstal/hcu4/u-boot.lds b/board/netstal/hcu4/u-boot.lds deleted file mode 100644 index f748ec3..0000000 --- a/board/netstal/hcu4/u-boot.lds +++ /dev/null @@ -1,137 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : { - /* The start.o file includes the initial jump vector that - must be located in the beginning. It is the basic run- - time function that calls all other functions. */ - cpu/ppc4xx/start.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 946c3f3..c545cc0 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -22,6 +22,8 @@ #include <asm/processor.h> #include <ppc440.h> #include <asm/io.h> +#include <asm/4xx_pci.h> + #include "../common/nm.h" DECLARE_GLOBAL_DATA_PTR; @@ -377,121 +379,17 @@ int pci_pre_init(struct pci_controller *hose) } /* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - */ -void pci_target_init(struct pci_controller *hose) -{ - if (!board_with_pci()) { return; } - /* - * Set up Direct MMIO registers - * - * PowerPC440EPX PCI Master configuration. - * Map one 1Gig range of PLB/processor addresses to PCI memory space. - * PLB address 0xA0000000-0xDFFFFFFF ==> PCI address - * 0xA0000000-0xDFFFFFFF - * Use byte reversed out routines to handle endianess. - * Make this region non-prefetchable. - */ - /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM0MA, 0x00000000); - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - /* 512M + No prefetching, and enable region */ - out32r(PCIL0_PMM0MA, 0xE0000001); - - /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM1MA, 0x00000000); - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - /* 512M + No prefetching, and enable region */ - out32r(PCIL0_PMM1MA, 0xE0000001); - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /* - * Set up Configuration registers - */ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); -} - -/* - * pci_master_init - * + * Override weak default pci_master_init() */ void pci_master_init(struct pci_controller *hose) { - unsigned short temp_short; - if (!board_with_pci()) { return; } - - /*--------------------------------------------------------------- - * Write the PowerPC440 EP PCI Configuration regs. - * Enable PowerPC440 EP to be a master on the PCI bus (PMM). - * Enable PowerPC440 EP to act as a PCI memory target (PTM). - *--------------------------------------------------------------*/ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} + if (!board_with_pci()) + return; -/* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - */ -int is_pci_host(struct pci_controller *hose) -{ - return 1; + __pci_master_init(hose); } #endif /* defined(CONFIG_PCI) */ -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ - #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/netstal/hcu5/u-boot.lds b/board/netstal/hcu5/u-boot.lds deleted file mode 100644 index bdc6e70..0000000 --- a/board/netstal/hcu5/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); - - _end = . ; - PROVIDE (end = .); -} diff --git a/board/netstal/mcu25/mcu25.c b/board/netstal/mcu25/mcu25.c index 945d79a..c66ab97 100644 --- a/board/netstal/mcu25/mcu25.c +++ b/board/netstal/mcu25/mcu25.c @@ -173,17 +173,6 @@ phys_size_t initdram(int board_type) return dram_size; } -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ - #if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) void ft_board_setup(void *blob, bd_t *bd) { diff --git a/board/netstal/mcu25/u-boot.lds b/board/netstal/mcu25/u-boot.lds deleted file mode 100644 index 2cf3361..0000000 --- a/board/netstal/mcu25/u-boot.lds +++ /dev/null @@ -1,137 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : { - /* The start.o file includes the initial jump vector that - must be located in the beginning. It is the basic run- - time function that calls all other functions. */ - cpu/ppc4xx/start.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/netta/netta.c b/board/netta/netta.c index 38c9d89..5c935f4 100644 --- a/board/netta/netta.c +++ b/board/netta/netta.c @@ -564,17 +564,6 @@ int pcmcia_init(void) #endif -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif - #ifdef CONFIG_HW_WATCHDOG void hw_watchdog_reset(void) diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index b70827e..ce1e616 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -551,166 +551,6 @@ phys_size_t initdram (int board_type) } /************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long addr; - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB3 devices to 0. - | Set PLB3 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); - - /*-------------------------------------------------------------------------+ - | Set priority for all PLB4 devices to 0. - +-------------------------------------------------------------------------*/ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); - - /*-------------------------------------------------------------------------+ - | Set Nebula PLB4 arbiter to fair mode. - +-------------------------------------------------------------------------*/ - /* Segment0 */ - addr = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; - addr = (addr & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; - addr = (addr & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; - addr = (addr & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; - mtdcr(PLB0_ACR, addr); - - /* Segment1 */ - addr = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; - addr = (addr & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; - addr = (addr & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; - addr = (addr & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; - mtdcr(PLB1_ACR, addr); - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Set up Direct MMIO registers - *--------------------------------------------------------------------------*/ - /*--------------------------------------------------------------------------+ - | PowerPC440 EP PCI Master configuration. - | Map one 1Gig range of PLB/processor addresses to PCI memory space. - | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF - | Use byte reversed out routines to handle endianess. - | Make this region non-prefetchable. - +--------------------------------------------------------------------------*/ - out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ - - /*--------------------------------------------------------------------------+ - * Set up Configuration registers - *--------------------------------------------------------------------------*/ - - /* Program the board's subsystem id/vendor id */ - pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CONFIG_SYS_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); - - /* Configure command register as bus master */ - pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); - - /* 240nS PCI clock */ - pci_write_config_word(0, PCI_LATENCY_TIMER, 1); - - /* No error reporting */ - pci_write_config_word(0, PCI_ERREN, 0); - - pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); - -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -/************************************************************************* - * pci_master_init - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) -void pci_master_init(struct pci_controller *hose) -{ - unsigned short temp_short; - - /*--------------------------------------------------------------------------+ - | Write the PowerPC440 EP PCI Configuration regs. - | Enable PowerPC440 EP to be a master on the PCI bus (PMM). - | Enable PowerPC440 EP to act as a PCI memory target (PTM). - +--------------------------------------------------------------------------*/ - pci_read_config_word(0, PCI_COMMAND, &temp_short); - pci_write_config_word(0, PCI_COMMAND, - temp_short | PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - -/************************************************************************* - * is_pci_host - * - * This routine is called to determine if a pci scan should be - * performed. With various hardware environments (especially cPCI and - * PPMC) it's insufficient to depend on the state of the arbiter enable - * bit in the strap register, or generic host/adapter assumptions. - * - * Rather than hard-code a bad assumption in the general 440 code, the - * 440 pci code requires the board to decide at runtime. - * - * Return 0 for adapter mode, non-zero for host (monarch) mode. - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* PCS440EP is always configured as host. */ - return (1); -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* * hw_watchdog_reset * * This routine is called to reset (keep alive) the watchdog timer diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index 51335c4..060e7eb 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -29,6 +29,7 @@ #include <ppc4xx_enet.h> #include <miiphy.h> #include <asm/processor.h> +#include <asm/4xx_pci.h> DECLARE_GLOBAL_DATA_PTR; @@ -144,81 +145,23 @@ int checkboard (void) return (0); } -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ #if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) +/* + * Override weak pci_pre_init() + */ +int pci_pre_init(struct pci_controller *hose) { - unsigned long strap; - - /*--------------------------------------------------------------------------+ - * The ocotea board is always configured as the host & requires the - * PCI arbiter to be enabled. - *--------------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); + if (__pci_pre_init(hose) == 0) return 0; - } /* FPGA Init */ - alpr_fpga_init (); + alpr_fpga_init(); return 1; } -#endif /* defined(CONFIG_PCI) */ /************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - - out32r( PCIL0_BAR0, 0 ); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -/************************************************************************* - * is_pci_host + * Override weak is_pci_host() * * This routine is called to determine if a pci scan should be * performed. With various hardware environments (especially cPCI and @@ -232,8 +175,6 @@ void pci_target_init(struct pci_controller * hose ) * * ************************************************************************/ -#if defined(CONFIG_PCI) - static void wait_for_pci_ready(void) { /* @@ -287,15 +228,3 @@ void pci_master_init(struct pci_controller *hose) out32r(PCIL0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - - return (ctrlc()); -} -#endif diff --git a/board/prodrive/alpr/u-boot.lds b/board/prodrive/alpr/u-boot.lds deleted file mode 100644 index 6633f91..0000000 --- a/board/prodrive/alpr/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/prodrive/alpr/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c index 9a07852..020f66d 100644 --- a/board/prodrive/p3p440/p3p440.c +++ b/board/prodrive/p3p440/p3p440.c @@ -165,77 +165,7 @@ int misc_init_r (void) } /************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller *hose) -{ - unsigned long strap; - - /*--------------------------------------------------------------------------+ - * The P3P440 board is always configured as the host & requires the - * PCI arbiter to be disabled because it's an PMC module. - *--------------------------------------------------------------------------*/ - strap = mfdcr(CPC0_STRP1); - if (strap & 0x00100000) { - printf("PCI: CPC0_STRP1[PAE] set.\n"); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r(PCIL0_PIM0SA, 0); /* disable */ - out32r(PCIL0_PIM1SA, 0); /* disable */ - out32r(PCIL0_PIM2SA, 0); /* disable */ - out32r(PCIL0_EROMBA, 0); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r(PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out32r(PCIL0_PIM0LAH, 0); - out32r(PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); - - out32r(PCIL0_BAR0, 0); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r(PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out16r(PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - - out16r(PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -/************************************************************************* - * is_pci_host + * Override weak is_pci_host() * * This routine is called to determine if a pci scan should be * performed. With various hardware environments (especially cPCI and diff --git a/board/prodrive/p3p440/u-boot.lds b/board/prodrive/p3p440/u-boot.lds deleted file mode 100644 index b1c2dff..0000000 --- a/board/prodrive/p3p440/u-boot.lds +++ /dev/null @@ -1,141 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/prodrive/p3p440/init.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/quad100hd/u-boot.lds b/board/quad100hd/u-boot.lds deleted file mode 100644 index 4f359b7..0000000 --- a/board/quad100hd/u-boot.lds +++ /dev/null @@ -1,131 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c index 2513937..49d8bba 100644 --- a/board/sacsng/sacsng.c +++ b/board/sacsng/sacsng.c @@ -869,15 +869,3 @@ void spi_cs_deactivate(struct spi_slave *slave) #endif #endif /* CONFIG_MISC_INIT_R */ - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} - -#endif diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c index 42bf008..1294d3f 100644 --- a/board/samsung/smdk2400/smdk2400.c +++ b/board/samsung/smdk2400/smdk2400.c @@ -27,7 +27,7 @@ #include <common.h> #include <netdev.h> -#include <s3c2400.h> +#include <asm/arch/s3c24x0_cpu.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c index fde7730..5d1a8bb 100644 --- a/board/samsung/smdk2410/smdk2410.c +++ b/board/samsung/smdk2410/smdk2410.c @@ -27,7 +27,7 @@ #include <common.h> #include <netdev.h> -#include <s3c2410.h> +#include <asm/arch/s3c24x0_cpu.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/samsung/smdk6400/lowlevel_init.S b/board/samsung/smdk6400/lowlevel_init.S index 47f72f6..30d8878 100644 --- a/board/samsung/smdk6400/lowlevel_init.S +++ b/board/samsung/smdk6400/lowlevel_init.S @@ -34,7 +34,7 @@ #include <config.h> #include <version.h> -#include <s3c6400.h> +#include <asm/arch/s3c6400.h> #ifdef CONFIG_SERIAL1 #define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART0_OFFSET) diff --git a/board/samsung/smdk6400/smdk6400.c b/board/samsung/smdk6400/smdk6400.c index 561c0c8..78aaa9e 100644 --- a/board/samsung/smdk6400/smdk6400.c +++ b/board/samsung/smdk6400/smdk6400.c @@ -30,7 +30,7 @@ #include <common.h> #include <netdev.h> -#include <s3c6400.h> +#include <asm/arch/s3c6400.h> /* ------------------------------------------------------------------------- */ #define CS8900_Tacs 0x0 /* 0clk address set-up */ diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c index a484874..6b91074 100644 --- a/board/sandburst/common/sb_common.c +++ b/board/sandburst/common/sb_common.c @@ -300,91 +300,6 @@ long int fixed_sdram (void) } #endif /* !defined(CONFIG_SPD_EEPROM) */ - -/************************************************************************* - * pci_pre_init - * - * This routine is called just prior to registering the hose and gives - * the board the opportunity to check things. Returning a value of zero - * indicates that things are bad & PCI initialization should be aborted. - * - * Different boards may wish to customize the pci controller structure - * (add regions, override default access routines, etc) or perform - * certain pre-initialization actions. - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int pci_pre_init(struct pci_controller * hose ) -{ - unsigned long strap; - - /*--------------------------------------------------------------------------+ - * The metrobox is always configured as the host & requires the - * PCI arbiter to be enabled. - *--------------------------------------------------------------------------*/ - mfsdr(SDR0_SDSTP1, strap); - if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ - printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); - return 0; - } - - return 1; -} -#endif /* defined(CONFIG_PCI) */ - -/************************************************************************* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - * - ************************************************************************/ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller * hose ) -{ - /*--------------------------------------------------------------------------+ - * Disable everything - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0SA, 0 ); /* disable */ - out32r( PCIL0_PIM1SA, 0 ); /* disable */ - out32r( PCIL0_PIM2SA, 0 ); /* disable */ - out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ - - /*--------------------------------------------------------------------------+ - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - *--------------------------------------------------------------------------*/ - out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIL0_PIM0LAH, 0 ); - out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - - out32r( PCIL0_BAR0, 0 ); - - /*--------------------------------------------------------------------------+ - * Program the board's subsystem id/vendor id - *--------------------------------------------------------------------------*/ - out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - - out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - - -/************************************************************************* - * is_pci_host - * - * - ************************************************************************/ -#if defined(CONFIG_PCI) -int is_pci_host(struct pci_controller *hose) -{ - /* The metrobox is always configured as host. */ - return(1); -} -#endif /* defined(CONFIG_PCI) */ - /************************************************************************* * board_get_enetaddr * diff --git a/board/sandburst/karef/u-boot.lds b/board/sandburst/karef/u-boot.lds deleted file mode 100644 index f22ece2..0000000 --- a/board/sandburst/karef/u-boot.lds +++ /dev/null @@ -1,156 +0,0 @@ -/* - * (C) Copyright 2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/sandburst/karef/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/sandburst/metrobox/u-boot.lds b/board/sandburst/metrobox/u-boot.lds deleted file mode 100644 index c5851f2..0000000 --- a/board/sandburst/metrobox/u-boot.lds +++ /dev/null @@ -1,156 +0,0 @@ -/* - * (C) Copyright 2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/sandburst/metrobox/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c index 7452c1f..3a93677 100644 --- a/board/sbc2410x/sbc2410x.c +++ b/board/sbc2410x/sbc2410x.c @@ -30,7 +30,7 @@ #include <common.h> #include <netdev.h> -#include <s3c2410.h> +#include <asm/arch/s3c24x0_cpu.h> #if defined(CONFIG_CMD_NAND) #include <linux/mtd/nand.h> diff --git a/board/sbc405/u-boot.lds b/board/sbc405/u-boot.lds deleted file mode 100644 index 89edd67..0000000 --- a/board/sbc405/u-boot.lds +++ /dev/null @@ -1,147 +0,0 @@ -/* - * (C) Copyright 2000, 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - -/* . = env_offset;*/ -/* common/env_embedded.o(.text)*/ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index 51d66d5..9183c15 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -268,17 +268,6 @@ ft_board_setup(void *blob, bd_t *bd) } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ -#define CONFIG_SYS_LIME_SRST ((CONFIG_SYS_LIME_BASE) + 0x01FC002C) -#define CONFIG_SYS_LIME_CCF ((CONFIG_SYS_LIME_BASE) + 0x01FC0038) -#define CONFIG_SYS_LIME_MMR ((CONFIG_SYS_LIME_BASE) + 0x01FCFFFC) -/* Lime clock frequency */ -#define CONFIG_SYS_LIME_CLK_100MHZ 0x00000 -#define CONFIG_SYS_LIME_CLK_133MHZ 0x10000 -/* SDRAM parameter */ -#define CONFIG_SYS_LIME_MMR_VALUE 0x4157BA63 - -#define DISPLAY_WIDTH 800 -#define DISPLAY_HEIGHT 480 #define DEFAULT_BRIGHTNESS 25 #define BACKLIGHT_ENABLE (1 << 31) @@ -308,14 +297,12 @@ const gdc_regs *board_get_regs (void) return init_regs; } -#define CONFIG_SYS_LIME_CID ((CONFIG_SYS_LIME_BASE) + 0x01FC00F0) -#define CONFIG_SYS_LIME_REV ((CONFIG_SYS_LIME_BASE) + 0x01FF8084) int lime_probe(void) { volatile ccsr_lbc_t *memctl = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR); uint cfg_br2; uint cfg_or2; - uint reg; + int type; cfg_br2 = memctl->br2; cfg_or2 = memctl->or2; @@ -325,21 +312,15 @@ int lime_probe(void) memctl->or2 = 0xfc000410; memctl->br2 = (CONFIG_SYS_LIME_BASE) | 0x00001901; - /* Try to access GDC ID/Revision registers */ - reg = in_be32((void *)CONFIG_SYS_LIME_CID); - reg = in_be32((void *)CONFIG_SYS_LIME_CID); - if (reg == 0x303) { - reg = in_be32((void *)CONFIG_SYS_LIME_REV); - reg = in_be32((void *)CONFIG_SYS_LIME_REV); - reg = ((reg & ~0xff) == 0x20050100) ? 1 : 0; - } else - reg = 0; + /* Get controller type */ + type = mb862xx_probe(CONFIG_SYS_LIME_BASE); /* Restore previous CS2 configuration */ memctl->br2 = 0; memctl->or2 = cfg_or2; memctl->br2 = cfg_br2; - return reg; + + return (type == MB862XX_TYPE_LIME) ? 1 : 0; } /* Returns Lime base address */ @@ -348,21 +329,8 @@ unsigned int board_video_init (void) if (!lime_probe()) return 0; - /* - * Reset Lime controller - */ - out_be32((void *)CONFIG_SYS_LIME_SRST, 0x1); - udelay(200); - - /* Set Lime clock to 133MHz */ - out_be32((void *)CONFIG_SYS_LIME_CCF, CONFIG_SYS_LIME_CLK_133MHZ); - /* Delay required */ - udelay(300); - /* Set memory parameters */ - out_be32((void *)CONFIG_SYS_LIME_MMR, CONFIG_SYS_LIME_MMR_VALUE); - - mb862xx.winSizeX = DISPLAY_WIDTH; - mb862xx.winSizeY = DISPLAY_HEIGHT; + mb862xx.winSizeX = 800; + mb862xx.winSizeY = 480; mb862xx.gdfIndex = GDF_15BIT_555RGB; mb862xx.gdfBytesPP = 2; diff --git a/board/ssv/adnpesc1/adnpesc1.c b/board/ssv/adnpesc1/adnpesc1.c index 72810d0..802bfba 100644 --- a/board/ssv/adnpesc1/adnpesc1.c +++ b/board/ssv/adnpesc1/adnpesc1.c @@ -91,17 +91,6 @@ void spi_cs_deactivate(struct spi_slave *slave) #endif -#if defined(CONFIG_POST) -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - return 0; /* No hotkeys supported */ -} -#endif /* CONFIG_POST */ - #ifdef CONFIG_CMD_NET int board_eth_init(bd_t *bis) { diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c index 5a091c4..d90bae8 100644 --- a/board/tqc/tqm5200/tqm5200.c +++ b/board/tqc/tqm5200/tqm5200.c @@ -745,7 +745,6 @@ int board_get_height (void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index 04a3607..472d7d8 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -25,7 +25,7 @@ #include <common.h> #include <command.h> -#include <s3c2400.h> +#include <asm/arch/s3c24x0_cpu.h> #include <rtc.h> /* diff --git a/board/trab/rs485.c b/board/trab/rs485.c index 7d5c0a2..ad0c136 100644 --- a/board/trab/rs485.c +++ b/board/trab/rs485.c @@ -22,7 +22,7 @@ */ #include <common.h> -#include <s3c2400.h> +#include <asm/arch/s3c24x0_cpu.h> #include "rs485.h" static void rs485_setbrg (void); diff --git a/board/trab/rs485.h b/board/trab/rs485.h index 9f0a5b9..16d69bb 100644 --- a/board/trab/rs485.h +++ b/board/trab/rs485.h @@ -24,7 +24,7 @@ #ifndef _RS485_H_ #define _RS485_H_ -#include <s3c2400.h> +#include <asm/arch/s3c24x0_cpu.h> int rs485_init (void); int rs485_getc (void); diff --git a/board/trab/trab.c b/board/trab/trab.c index ea782a9..71fd22c 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -26,7 +26,7 @@ #include <common.h> #include <netdev.h> #include <malloc.h> -#include <s3c2400.h> +#include <asm/arch/s3c24x0_cpu.h> #include <command.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c index dc2a8d7..2df9a04 100644 --- a/board/trab/trab_fkt.c +++ b/board/trab/trab_fkt.c @@ -26,7 +26,7 @@ #include <common.h> #include <exports.h> #include <timestamp.h> -#include <s3c2400.h> +#include <asm/arch/s3c24x0_cpu.h> #include "tsc2000.h" #include "rs485.h" diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c index fc501a8..5890624 100644 --- a/board/trab/tsc2000.c +++ b/board/trab/tsc2000.c @@ -26,7 +26,7 @@ */ #include <common.h> -#include <s3c2400.h> +#include <asm/arch/s3c24x0_cpu.h> #include <asm/io.h> #include <div64.h> #include "tsc2000.h" diff --git a/board/trab/vfd.c b/board/trab/vfd.c index d5ad5bb..b7eb8cc 100644 --- a/board/trab/vfd.c +++ b/board/trab/vfd.c @@ -37,7 +37,7 @@ #include <stdarg.h> #include <linux/types.h> #include <stdio_dev.h> -#include <s3c2400.h> +#include <asm/arch/s3c24x0_cpu.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/board/uc100/uc100.c b/board/uc100/uc100.c index 38c7be6..4dba290 100644 --- a/board/uc100/uc100.c +++ b/board/uc100/uc100.c @@ -268,15 +268,3 @@ int misc_init_r (void) return 0; } - - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed (void) -{ - return 0; /* No hotkeys supported */ -} -#endif diff --git a/board/uc101/uc101.c b/board/uc101/uc101.c index 1485c02..c7dfb7b 100644 --- a/board/uc101/uc101.c +++ b/board/uc101/uc101.c @@ -377,6 +377,5 @@ void hw_watchdog_reset(void) void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/w7o/u-boot.lds b/board/w7o/u-boot.lds deleted file mode 100644 index d953fd4..0000000 --- a/board/w7o/u-boot.lds +++ /dev/null @@ -1,132 +0,0 @@ -/* - * (C) Copyright 2001 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - board/w7o/init.o (.text) - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/xes/xpedite1000/u-boot.lds b/board/xes/xpedite1000/u-boot.lds deleted file mode 100644 index 73f65d6..0000000 --- a/board/xes/xpedite1000/u-boot.lds +++ /dev/null @@ -1,151 +0,0 @@ -/* - * (C) Copyright 2002-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - cpu/ppc4xx/start.o (.text) - board/xes/xpedite1000/init.o (.text) - cpu/ppc4xx/kgdb.o (.text) - cpu/ppc4xx/traps.o (.text) - cpu/ppc4xx/interrupts.o (.text) - cpu/ppc4xx/4xx_uart.o (.text) - cpu/ppc4xx/cpu_init.o (.text) - cpu/ppc4xx/speed.o (.text) - common/dlmalloc.o (.text) - lib_generic/crc32.o (.text) - lib_ppc/extable.o (.text) - lib_generic/zlib.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.eh_frame) - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/board/xes/xpedite1000/xpedite1000.c b/board/xes/xpedite1000/xpedite1000.c index 04949bb..b4cbb2f 100644 --- a/board/xes/xpedite1000/xpedite1000.c +++ b/board/xes/xpedite1000/xpedite1000.c @@ -136,6 +136,8 @@ phys_size_t initdram(int board_type) } /* + * Override weak pci_pre_init() + * * This routine is called just prior to registering the hose and gives * the board the opportunity to check things. Returning a value of zero * indicates that things are bad & PCI initialization should be aborted. @@ -144,7 +146,6 @@ phys_size_t initdram(int board_type) * (add regions, override default access routines, etc) or perform * certain pre-initialization actions. */ - #if defined(CONFIG_PCI) int pci_pre_init(struct pci_controller * hose) { @@ -166,40 +167,10 @@ int pci_pre_init(struct pci_controller * hose) } #endif /* defined(CONFIG_PCI) */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -/* - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - */ -void pci_target_init(struct pci_controller * hose) -{ - /* Disable everything */ - out32r(PCIL0_PIM0SA, 0); - out32r(PCIL0_PIM1SA, 0); - out32r(PCIL0_PIM2SA, 0); - out32r(PCIL0_EROMBA, 0); /* disable expansion rom */ - - /* - * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping - * options to not support sizes such as 128/256 MB. - */ - out32r(PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out32r(PCIL0_PIM0LAH, 0); - out32r(PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); - - out32r(PCIL0_BAR0, 0); - - /* Program the board's subsystem id/vendor id */ - out16r(PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out16r(PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - - out16r(PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - #if defined(CONFIG_PCI) /* + * Override weak is_pci_host() + * * This routine is called to determine if a pci scan should be * performed. With various hardware environments (especially cPCI and * PPMC) it's insufficient to depend on the state of the arbiter enable diff --git a/board/xilinx/ml300/config.mk b/board/xilinx/ml300/config.mk index 57ddb2f..208a25ba 100644 --- a/board/xilinx/ml300/config.mk +++ b/board/xilinx/ml300/config.mk @@ -27,3 +27,6 @@ #TEXT_BASE = 0xFFFE0000 TEXT_BASE = 0x04000000 + +# Use board specific linker script +LDSCRIPT := $(SRCTREE)/board/xilinx/ml300/u-boot.lds diff --git a/board/zeus/u-boot.lds b/board/zeus/u-boot.lds deleted file mode 100644 index f3ccd33..0000000 --- a/board/zeus/u-boot.lds +++ /dev/null @@ -1,130 +0,0 @@ -/* - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - _end = . ; - PROVIDE (end = .); -} diff --git a/common/Makefile b/common/Makefile index 47f6a71..7784180 100644 --- a/common/Makefile +++ b/common/Makefile @@ -44,7 +44,9 @@ COBJS-y += xyzModem.o # core command COBJS-y += cmd_boot.o COBJS-y += cmd_bootm.o +COBJS-y += cmd_help.o COBJS-y += cmd_nvedit.o +COBJS-y += cmd_version.o # environment COBJS-y += env_common.o @@ -83,9 +85,11 @@ COBJS-$(CONFIG_CMD_DIAG) += cmd_diag.o endif COBJS-$(CONFIG_CMD_DISPLAY) += cmd_display.o COBJS-$(CONFIG_CMD_DTT) += cmd_dtt.o +COBJS-$(CONFIG_CMD_ECHO) += cmd_echo.o COBJS-$(CONFIG_ENV_IS_IN_EEPROM) += cmd_eeprom.o COBJS-$(CONFIG_CMD_EEPROM) += cmd_eeprom.o COBJS-$(CONFIG_CMD_ELF) += cmd_elf.o +COBJS-$(CONFIG_SYS_HUSH_PARSER) += cmd_exit.o COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o COBJS-$(CONFIG_CMD_FDC)$(CONFIG_CMD_FDOS) += cmd_fdc.o @@ -115,7 +119,7 @@ COBJS-$(CONFIG_CMD_MISC) += cmd_misc.o COBJS-$(CONFIG_CMD_MMC) += cmd_mmc.o COBJS-$(CONFIG_MP) += cmd_mp.o COBJS-$(CONFIG_CMD_MTDPARTS) += cmd_mtdparts.o -COBJS-y += cmd_nand.o +COBJS-$(CONFIG_CMD_NAND) += cmd_nand.o COBJS-$(CONFIG_CMD_NET) += cmd_net.o COBJS-$(CONFIG_CMD_ONENAND) += cmd_onenand.o COBJS-$(CONFIG_CMD_OTP) += cmd_otp.o @@ -134,6 +138,7 @@ COBJS-$(CONFIG_CMD_SPI) += cmd_spi.o COBJS-$(CONFIG_CMD_SPIBOOTLDR) += cmd_spibootldr.o COBJS-$(CONFIG_CMD_STRINGS) += cmd_strings.o COBJS-$(CONFIG_CMD_TERMINAL) += cmd_terminal.o +COBJS-$(CONFIG_SYS_HUSH_PARSER) += cmd_test.o COBJS-$(CONFIG_CMD_TSI148) += cmd_tsi148.o COBJS-$(CONFIG_CMD_UBI) += cmd_ubi.o COBJS-$(CONFIG_CMD_UBIFS) += cmd_ubifs.o diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index e16552e..efd6aec 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -57,6 +57,10 @@ #include <lzma/LzmaTools.h> #endif /* CONFIG_LZMA */ +#ifdef CONFIG_LZO +#include <linux/lzo.h> +#endif /* CONFIG_LZO */ + DECLARE_GLOBAL_DATA_PTR; extern int gunzip (void *dst, int dstlen, unsigned char *src, unsigned long *lenp); @@ -405,6 +409,24 @@ static int bootm_load_os(image_info_t os, ulong *load_end, int boot_progress) *load_end = load + unc_len; break; #endif /* CONFIG_LZMA */ +#ifdef CONFIG_LZO + case IH_COMP_LZO: + printf (" Uncompressing %s ... ", type_name); + + int ret = lzop_decompress((const unsigned char *)image_start, + image_len, (unsigned char *)load, + &unc_len); + if (ret != LZO_E_OK) { + printf ("LZO: uncompress or overwrite error %d " + "- must RESET board to recover\n", ret); + if (boot_progress) + show_boot_progress (-6); + return BOOTM_ERR_RESET; + } + + *load_end = load + unc_len; + break; +#endif /* CONFIG_LZO */ default: printf ("Unimplemented compression type %d\n", comp); return BOOTM_ERR_UNIMPLEMENTED; diff --git a/common/cmd_echo.c b/common/cmd_echo.c new file mode 100644 index 0000000..3ec4d48 --- /dev/null +++ b/common/cmd_echo.c @@ -0,0 +1,58 @@ +/* + * Copyright 2000-2009 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> + +int do_echo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int i; + int putnl = 1; + + for (i = 1; i < argc; i++) { + char *p = argv[i], c; + + if (i > 1) + putc(' '); + while ((c = *p++) != '\0') { + if (c == '\\' && *p == 'c') { + putnl = 0; + p++; + } else { + putc(c); + } + } + } + + if (putnl) + putc('\n'); + + return 0; +} + +U_BOOT_CMD( + echo, CONFIG_SYS_MAXARGS, 1, do_echo, + "echo args to console", + "[args..]\n" + " - echo args to console; \\c suppresses newline" +); diff --git a/common/cmd_exit.c b/common/cmd_exit.c new file mode 100644 index 0000000..ed876d8 --- /dev/null +++ b/common/cmd_exit.c @@ -0,0 +1,42 @@ +/* + * Copyright 2000-2009 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> + +int do_exit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + int r; + + r = 0; + if (argc > 1) + r = simple_strtoul(argv[1], NULL, 10); + + return -r - 2; +} + +U_BOOT_CMD( + exit, 2, 1, do_exit, + "exit script", + "" +); diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c index 919a0bf..5df79ae 100644 --- a/common/cmd_fdt.c +++ b/common/cmd_fdt.c @@ -364,13 +364,8 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } else if (strncmp(argv[1], "me", 2) == 0) { uint64_t addr, size; int err; -#ifdef CONFIG_SYS_64BIT_STRTOUL - addr = simple_strtoull(argv[2], NULL, 16); - size = simple_strtoull(argv[3], NULL, 16); -#else - addr = simple_strtoul(argv[2], NULL, 16); - size = simple_strtoul(argv[3], NULL, 16); -#endif + addr = simple_strtoull(argv[2], NULL, 16); + size = simple_strtoull(argv[3], NULL, 16); err = fdt_fixup_memory(working_fdt, addr, size); if (err < 0) return err; @@ -402,13 +397,8 @@ int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) } else if (argv[2][0] == 'a') { uint64_t addr, size; int err; -#ifdef CONFIG_SYS_64BIT_STRTOUL addr = simple_strtoull(argv[3], NULL, 16); size = simple_strtoull(argv[4], NULL, 16); -#else - addr = simple_strtoul(argv[3], NULL, 16); - size = simple_strtoul(argv[4], NULL, 16); -#endif err = fdt_add_mem_rsv(working_fdt, addr, size); if (err < 0) { diff --git a/common/cmd_help.c b/common/cmd_help.c new file mode 100644 index 0000000..e860dfb --- /dev/null +++ b/common/cmd_help.c @@ -0,0 +1,50 @@ +/* + * Copyright 2000-2009 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> + +int do_help(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +{ + return _do_help(&__u_boot_cmd_start, + &__u_boot_cmd_end - &__u_boot_cmd_start, + cmdtp, flag, argc, argv); +} + +U_BOOT_CMD( + help, CONFIG_SYS_MAXARGS, 1, do_help, + "print command description/usage", + "\n" + " - print brief description of all commands\n" + "help command ...\n" + " - print detailed usage of 'command'" +); + +/* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */ +cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = { + "?", CONFIG_SYS_MAXARGS, 1, do_help, + "alias for 'help'", +#ifdef CONFIG_SYS_LONGHELP + "" +#endif /* CONFIG_SYS_LONGHELP */ +}; diff --git a/common/cmd_ide.c b/common/cmd_ide.c index ec9a1df..093ca9f 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -1354,7 +1354,7 @@ ulong ide_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer) } if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) { -#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF) +#if defined(CONFIG_SYS_64BIT_LBA) printf ("Error (no IRQ) dev %d blk %Ld: status 0x%02x\n", device, blknr, c); #else @@ -1444,7 +1444,7 @@ ulong ide_write (int device, lbaint_t blknr, ulong blkcnt, void *buffer) c = ide_wait (device, IDE_TIME_OUT); /* can't take over 500 ms */ if ((c&(ATA_STAT_DRQ|ATA_STAT_BUSY|ATA_STAT_ERR)) != ATA_STAT_DRQ) { -#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF) +#if defined(CONFIG_SYS_64BIT_LBA) printf ("Error (no IRQ) dev %d blk %Ld: status 0x%02x\n", device, blknr, c); #else diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 158a55f..075a8af 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -9,18 +9,7 @@ */ #include <common.h> - - -/* - * - * New NAND support - * - */ -#include <common.h> #include <linux/mtd/mtd.h> - -#if defined(CONFIG_CMD_NAND) - #include <command.h> #include <watchdog.h> #include <malloc.h> @@ -686,4 +675,3 @@ U_BOOT_CMD(nboot, 4, 1, do_nandboot, "boot from NAND device", "[partition] | [[[loadAddr] dev] offset]" ); -#endif diff --git a/common/cmd_onenand.c b/common/cmd_onenand.c index 9090940..565257c 100644 --- a/common/cmd_onenand.c +++ b/common/cmd_onenand.c @@ -19,10 +19,6 @@ #include <asm/io.h> -#if !defined(CONFIG_SYS_64BIT_VSPRINTF) -#warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output! -#endif - static struct mtd_info *mtd; static loff_t next_ofs; diff --git a/common/cmd_test.c b/common/cmd_test.c new file mode 100644 index 0000000..d886f89 --- /dev/null +++ b/common/cmd_test.c @@ -0,0 +1,173 @@ +/* + * Copyright 2000-2009 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> + +int do_test(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + char **ap; + int left, adv, expr, last_expr, neg, last_cmp; + + /* args? */ + if (argc < 3) + return 1; + +#if 0 + { + printf("test:"); + left = 1; + while (argv[left]) + printf(" %s", argv[left++]); + } +#endif + + last_expr = 0; + left = argc - 1; ap = argv + 1; + if (left > 0 && strcmp(ap[0], "!") == 0) { + neg = 1; + ap++; + left--; + } else + neg = 0; + + expr = -1; + last_cmp = -1; + last_expr = -1; + while (left > 0) { + + if (strcmp(ap[0], "-o") == 0 || strcmp(ap[0], "-a") == 0) + adv = 1; + else if (strcmp(ap[0], "-z") == 0 || strcmp(ap[0], "-n") == 0) + adv = 2; + else + adv = 3; + + if (left < adv) { + expr = 1; + break; + } + + if (adv == 1) { + if (strcmp(ap[0], "-o") == 0) { + last_expr = expr; + last_cmp = 0; + } else if (strcmp(ap[0], "-a") == 0) { + last_expr = expr; + last_cmp = 1; + } else { + expr = 1; + break; + } + } + + if (adv == 2) { + if (strcmp(ap[0], "-z") == 0) + expr = strlen(ap[1]) == 0 ? 1 : 0; + else if (strcmp(ap[0], "-n") == 0) + expr = strlen(ap[1]) == 0 ? 0 : 1; + else { + expr = 1; + break; + } + + if (last_cmp == 0) + expr = last_expr || expr; + else if (last_cmp == 1) + expr = last_expr && expr; + last_cmp = -1; + } + + if (adv == 3) { + if (strcmp(ap[1], "=") == 0) + expr = strcmp(ap[0], ap[2]) == 0; + else if (strcmp(ap[1], "!=") == 0) + expr = strcmp(ap[0], ap[2]) != 0; + else if (strcmp(ap[1], ">") == 0) + expr = strcmp(ap[0], ap[2]) > 0; + else if (strcmp(ap[1], "<") == 0) + expr = strcmp(ap[0], ap[2]) < 0; + else if (strcmp(ap[1], "-eq") == 0) + expr = simple_strtol(ap[0], NULL, 10) == simple_strtol(ap[2], NULL, 10); + else if (strcmp(ap[1], "-ne") == 0) + expr = simple_strtol(ap[0], NULL, 10) != simple_strtol(ap[2], NULL, 10); + else if (strcmp(ap[1], "-lt") == 0) + expr = simple_strtol(ap[0], NULL, 10) < simple_strtol(ap[2], NULL, 10); + else if (strcmp(ap[1], "-le") == 0) + expr = simple_strtol(ap[0], NULL, 10) <= simple_strtol(ap[2], NULL, 10); + else if (strcmp(ap[1], "-gt") == 0) + expr = simple_strtol(ap[0], NULL, 10) > simple_strtol(ap[2], NULL, 10); + else if (strcmp(ap[1], "-ge") == 0) + expr = simple_strtol(ap[0], NULL, 10) >= simple_strtol(ap[2], NULL, 10); + else { + expr = 1; + break; + } + + if (last_cmp == 0) + expr = last_expr || expr; + else if (last_cmp == 1) + expr = last_expr && expr; + last_cmp = -1; + } + + ap += adv; left -= adv; + } + + if (neg) + expr = !expr; + + expr = !expr; + + debug (": returns %d\n", expr); + + return expr; +} + +U_BOOT_CMD( + test, CONFIG_SYS_MAXARGS, 1, do_test, + "minimal test like /bin/sh", + "[args..]" +); + +int do_false(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + return 1; +} + +U_BOOT_CMD( + false, CONFIG_SYS_MAXARGS, 1, do_false, + "do nothing, unsuccessfully", + NULL +); + +int do_true(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + return 0; +} + +U_BOOT_CMD( + true, CONFIG_SYS_MAXARGS, 1, do_true, + "do nothing, successfully", + NULL +); diff --git a/common/cmd_version.c b/common/cmd_version.c new file mode 100644 index 0000000..7f165c7 --- /dev/null +++ b/common/cmd_version.c @@ -0,0 +1,40 @@ +/* + * Copyright 2000-2009 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> + +extern char version_string[]; + +int do_version(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +{ + printf("\n%s\n", version_string); + + return 0; +} + +U_BOOT_CMD( + version, 1, 1, do_version, + "print monitor version", + "" +); diff --git a/common/command.c b/common/command.c index b57f8df..0c66b7a 100644 --- a/common/command.c +++ b/common/command.c @@ -28,206 +28,6 @@ #include <common.h> #include <command.h> -int -do_version (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - extern char version_string[]; - printf ("\n%s\n", version_string); - return 0; -} - -U_BOOT_CMD( - version, 1, 1, do_version, - "print monitor version", - "" -); - -#if defined(CONFIG_CMD_ECHO) - -int -do_echo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - int i, putnl = 1; - - for (i = 1; i < argc; i++) { - char *p = argv[i], c; - - if (i > 1) - putc(' '); - while ((c = *p++) != '\0') { - if (c == '\\' && *p == 'c') { - putnl = 0; - p++; - } else { - putc(c); - } - } - } - - if (putnl) - putc('\n'); - return 0; -} - -U_BOOT_CMD( - echo, CONFIG_SYS_MAXARGS, 1, do_echo, - "echo args to console", - "[args..]\n" - " - echo args to console; \\c suppresses newline" -); - -#endif - -#ifdef CONFIG_SYS_HUSH_PARSER - -int -do_test (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - char **ap; - int left, adv, expr, last_expr, neg, last_cmp; - - /* args? */ - if (argc < 3) - return 1; - -#if 0 - { - printf("test:"); - left = 1; - while (argv[left]) - printf(" %s", argv[left++]); - } -#endif - - last_expr = 0; - left = argc - 1; ap = argv + 1; - if (left > 0 && strcmp(ap[0], "!") == 0) { - neg = 1; - ap++; - left--; - } else - neg = 0; - - expr = -1; - last_cmp = -1; - last_expr = -1; - while (left > 0) { - - if (strcmp(ap[0], "-o") == 0 || strcmp(ap[0], "-a") == 0) - adv = 1; - else if (strcmp(ap[0], "-z") == 0 || strcmp(ap[0], "-n") == 0) - adv = 2; - else - adv = 3; - - if (left < adv) { - expr = 1; - break; - } - - if (adv == 1) { - if (strcmp(ap[0], "-o") == 0) { - last_expr = expr; - last_cmp = 0; - } else if (strcmp(ap[0], "-a") == 0) { - last_expr = expr; - last_cmp = 1; - } else { - expr = 1; - break; - } - } - - if (adv == 2) { - if (strcmp(ap[0], "-z") == 0) - expr = strlen(ap[1]) == 0 ? 1 : 0; - else if (strcmp(ap[0], "-n") == 0) - expr = strlen(ap[1]) == 0 ? 0 : 1; - else { - expr = 1; - break; - } - - if (last_cmp == 0) - expr = last_expr || expr; - else if (last_cmp == 1) - expr = last_expr && expr; - last_cmp = -1; - } - - if (adv == 3) { - if (strcmp(ap[1], "=") == 0) - expr = strcmp(ap[0], ap[2]) == 0; - else if (strcmp(ap[1], "!=") == 0) - expr = strcmp(ap[0], ap[2]) != 0; - else if (strcmp(ap[1], ">") == 0) - expr = strcmp(ap[0], ap[2]) > 0; - else if (strcmp(ap[1], "<") == 0) - expr = strcmp(ap[0], ap[2]) < 0; - else if (strcmp(ap[1], "-eq") == 0) - expr = simple_strtol(ap[0], NULL, 10) == simple_strtol(ap[2], NULL, 10); - else if (strcmp(ap[1], "-ne") == 0) - expr = simple_strtol(ap[0], NULL, 10) != simple_strtol(ap[2], NULL, 10); - else if (strcmp(ap[1], "-lt") == 0) - expr = simple_strtol(ap[0], NULL, 10) < simple_strtol(ap[2], NULL, 10); - else if (strcmp(ap[1], "-le") == 0) - expr = simple_strtol(ap[0], NULL, 10) <= simple_strtol(ap[2], NULL, 10); - else if (strcmp(ap[1], "-gt") == 0) - expr = simple_strtol(ap[0], NULL, 10) > simple_strtol(ap[2], NULL, 10); - else if (strcmp(ap[1], "-ge") == 0) - expr = simple_strtol(ap[0], NULL, 10) >= simple_strtol(ap[2], NULL, 10); - else { - expr = 1; - break; - } - - if (last_cmp == 0) - expr = last_expr || expr; - else if (last_cmp == 1) - expr = last_expr && expr; - last_cmp = -1; - } - - ap += adv; left -= adv; - } - - if (neg) - expr = !expr; - - expr = !expr; - - debug (": returns %d\n", expr); - - return expr; -} - -U_BOOT_CMD( - test, CONFIG_SYS_MAXARGS, 1, do_test, - "minimal test like /bin/sh", - "[args..]" -); - -int -do_exit (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) -{ - int r; - - r = 0; - if (argc > 1) - r = simple_strtoul(argv[1], NULL, 10); - - return -r - 2; -} - -U_BOOT_CMD( - exit, 2, 1, do_exit, - "exit script", - "" -); - - -#endif - /* * Use puts() instead of printf() to avoid printf buffer overflow * for long help messages @@ -297,39 +97,6 @@ int _do_help (cmd_tbl_t *cmd_start, int cmd_items, cmd_tbl_t * cmdtp, int return rcode; } -int do_help (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) -{ - return _do_help(&__u_boot_cmd_start, - &__u_boot_cmd_end - &__u_boot_cmd_start, - cmdtp, flag, argc, argv); -} - - -U_BOOT_CMD( - help, CONFIG_SYS_MAXARGS, 1, do_help, - "print online help", - "[command ...]\n" - " - show help information (for 'command')\n" - "'help' prints online help for the monitor commands.\n\n" - "Without arguments, it prints a short usage message for all commands.\n\n" - "To get detailed help information for specific commands you can type\n" - "'help' with one or more command names as arguments." -); - -/* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */ -#ifdef CONFIG_SYS_LONGHELP -cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = { - "?", CONFIG_SYS_MAXARGS, 1, do_help, - "alias for 'help'", - "" -}; -#else -cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = { - "?", CONFIG_SYS_MAXARGS, 1, do_help, - "alias for 'help'" -}; -#endif /* CONFIG_SYS_LONGHELP */ - /*************************************************************************** * find command table entry for a command */ diff --git a/common/dlmalloc.c b/common/dlmalloc.c index ca088a1..735b344 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -1522,11 +1522,6 @@ void *sbrk(ptrdiff_t increment) return (void *)old; } -#ifndef CONFIG_X86 -/* - * x86 boards use a slightly different init sequence thus they implement - * their own version of mem_malloc_init() - */ void mem_malloc_init(ulong start, ulong size) { mem_malloc_start = start; @@ -1535,7 +1530,6 @@ void mem_malloc_init(ulong start, ulong size) memset((void *)mem_malloc_start, 0, size); } -#endif /* field-extraction macros */ diff --git a/common/env_onenand.c b/common/env_onenand.c index dcf09de..23d2caa 100644 --- a/common/env_onenand.c +++ b/common/env_onenand.c @@ -60,11 +60,14 @@ uchar env_get_char_spec(int index) void env_relocate_spec(void) { struct mtd_info *mtd = &onenand_mtd; + struct onenand_chip *this = &onenand_chip; loff_t env_addr; int use_default = 0; size_t retlen; env_addr = CONFIG_ENV_ADDR; + if (FLEXONENAND(this)) + env_addr = CONFIG_ENV_ADDR_FLEX; /* Check OneNAND exist */ if (mtd->writesize) @@ -91,6 +94,7 @@ void env_relocate_spec(void) int saveenv(void) { struct mtd_info *mtd = &onenand_mtd; + struct onenand_chip *this = &onenand_chip; loff_t env_addr = CONFIG_ENV_ADDR; struct erase_info instr = { .callback = NULL, @@ -98,6 +102,12 @@ int saveenv(void) size_t retlen; instr.len = CONFIG_ENV_SIZE; + if (FLEXONENAND(this)) { + env_addr = CONFIG_ENV_ADDR_FLEX; + instr.len = CONFIG_ENV_SIZE_FLEX; + instr.len <<= onenand_mtd.eraseregions[0].numblocks == 1 ? + 1 : 0; + } instr.addr = env_addr; instr.mtd = mtd; if (mtd->erase(mtd, &instr)) { diff --git a/common/exports.c b/common/exports.c index b3b6e1f..60bba75 100644 --- a/common/exports.c +++ b/common/exports.c @@ -12,38 +12,34 @@ unsigned long get_version(void) return XF_VERSION; } -void jumptable_init (void) -{ - int i; - - gd->jt = (void **) malloc (XF_MAX * sizeof (void *)); - for (i = 0; i < XF_MAX; i++) - gd->jt[i] = (void *) dummy; +/* Reuse _exports.h with a little trickery to avoid bitrot */ +#define EXPORT_FUNC(sym) gd->jt[XF_##sym] = (void *)sym; - gd->jt[XF_get_version] = (void *) get_version; - gd->jt[XF_malloc] = (void *) malloc; - gd->jt[XF_free] = (void *) free; - gd->jt[XF_getenv] = (void *) getenv; - gd->jt[XF_setenv] = (void *) setenv; - gd->jt[XF_get_timer] = (void *) get_timer; - gd->jt[XF_simple_strtoul] = (void *) simple_strtoul; - gd->jt[XF_udelay] = (void *) udelay; - gd->jt[XF_simple_strtol] = (void *) simple_strtol; - gd->jt[XF_strcmp] = (void *) strcmp; -#if defined(CONFIG_I386) || defined(CONFIG_PPC) - gd->jt[XF_install_hdlr] = (void *) irq_install_handler; - gd->jt[XF_free_hdlr] = (void *) irq_free_handler; -#endif /* I386 || PPC */ -#if defined(CONFIG_CMD_I2C) - gd->jt[XF_i2c_write] = (void *) i2c_write; - gd->jt[XF_i2c_read] = (void *) i2c_read; +#if !defined(CONFIG_I386) && !defined(CONFIG_PPC) +# define install_hdlr dummy +# define free_hdlr dummy +#else /* kludge for non-standard function naming */ +# define install_hdlr irq_install_handler +# define free_hdlr irq_free_handler +#endif +#ifndef CONFIG_CMD_I2C +# define i2c_write dummy +# define i2c_read dummy #endif -#ifdef CONFIG_CMD_SPI - gd->jt[XF_spi_init] = (void *) spi_init; - gd->jt[XF_spi_setup_slave] = (void *) spi_setup_slave; - gd->jt[XF_spi_free_slave] = (void *) spi_free_slave; - gd->jt[XF_spi_claim_bus] = (void *) spi_claim_bus; - gd->jt[XF_spi_release_bus] = (void *) spi_release_bus; - gd->jt[XF_spi_xfer] = (void *) spi_xfer; +#ifndef CONFIG_CMD_SPI +# define spi_init dummy +# define spi_setup_slave dummy +# define spi_free_slave dummy +# define spi_claim_bus dummy +# define spi_release_bus dummy +# define spi_xfer dummy #endif +#ifndef CONFIG_HAS_UID +# define forceenv dummy +#endif + +void jumptable_init(void) +{ + gd->jt = malloc(XF_MAX * sizeof(void *)); +#include <_exports.h> } diff --git a/common/image.c b/common/image.c index 6eaf41e..82e7aa4 100644 --- a/common/image.c +++ b/common/image.c @@ -148,6 +148,7 @@ static table_entry_t uimage_comp[] = { { IH_COMP_BZIP2, "bzip2", "bzip2 compressed", }, { IH_COMP_GZIP, "gzip", "gzip compressed", }, { IH_COMP_LZMA, "lzma", "lzma compressed", }, + { IH_COMP_LZO, "lzo", "lzo compressed", }, { -1, "", "", }, }; @@ -435,11 +436,7 @@ phys_size_t getenv_bootm_size(void) char *s = getenv ("bootm_size"); if (s) { phys_size_t tmp; -#ifdef CONFIG_SYS_64BIT_STRTOUL tmp = (phys_size_t)simple_strtoull (s, NULL, 16); -#else - tmp = (phys_size_t)simple_strtoul (s, NULL, 16); -#endif return tmp; } @@ -46,13 +46,41 @@ PLATFORM_LDFLAGS = ######################################################################### +HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer \ + $(HOSTCPPFLAGS) +HOSTSTRIP = strip + +# +# Mac OS X / Darwin's C preprocessor is Apple specific. It +# generates numerous errors and warnings. We want to bypass it +# and use GNU C's cpp. To do this we pass the -traditional-cpp +# option to the compiler. Note that the -traditional-cpp flag +# DOES NOT have the same semantics as GNU C's flag, all it does +# is invoke the GNU preprocessor in stock ANSI/ISO C fashion. +# +# Apple's linker is similar, thanks to the new 2 stage linking +# multiple symbol definitions are treated as errors, hence the +# -multiply_defined suppress option to turn off this error. +# + ifeq ($(HOSTOS),darwin) HOSTCC = cc +HOSTCFLAGS += -traditional-cpp +HOSTLDFLAGS += -multiply_defined suppress else HOSTCC = gcc endif -HOSTCFLAGS = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -HOSTSTRIP = strip + +ifeq ($(HOSTOS),cygwin) +HOSTCFLAGS += -ansi +endif + +# We build some files with extra pedantic flags to try to minimize things +# that won't build on some weird host compiler -- though there are lots of +# exceptions for files that aren't complaint. + +HOSTCFLAGS_NOPED = $(filter-out -pedantic,$(HOSTCFLAGS)) +HOSTCFLAGS += -pedantic ######################################################################### # @@ -200,7 +228,7 @@ endif ######################################################################### -export HOSTCC HOSTCFLAGS CROSS_COMPILE \ +export HOSTCC HOSTCFLAGS HOSTLDFLAGS PEDCFLAGS HOSTSTRIP CROSS_COMPILE \ AS LD CC CPP AR NM STRIP OBJCOPY OBJDUMP MAKE export TEXT_BASE PLATFORM_CPPFLAGS PLATFORM_RELFLAGS CPPFLAGS CFLAGS AFLAGS diff --git a/cpu/arm1136/mx31/timer.c b/cpu/arm1136/mx31/timer.c index 29b484e..7972ba0 100644 --- a/cpu/arm1136/mx31/timer.c +++ b/cpu/arm1136/mx31/timer.c @@ -152,7 +152,7 @@ void set_timer (ulong t) } /* delay x useconds AND perserve advance timstamp value */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { unsigned long long tmp; ulong tmo; diff --git a/cpu/arm1136/omap24xx/timer.c b/cpu/arm1136/omap24xx/timer.c index 8dd8d7b..6754749 100644 --- a/cpu/arm1136/omap24xx/timer.c +++ b/cpu/arm1136/omap24xx/timer.c @@ -74,7 +74,7 @@ void set_timer (ulong t) } /* delay x useconds AND perserve advance timstamp value */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo, tmp; diff --git a/cpu/arm1176/cpu.c b/cpu/arm1176/cpu.c index d1a3327..2c0014f 100644 --- a/cpu/arm1176/cpu.c +++ b/cpu/arm1176/cpu.c @@ -33,7 +33,7 @@ #include <common.h> #include <command.h> -#include <s3c6400.h> +#include <asm/arch/s3c6400.h> #include <asm/system.h> static void cache_flush (void); diff --git a/cpu/arm1176/s3c64xx/cpu_init.S b/cpu/arm1176/s3c64xx/cpu_init.S index 32bb467..df88cba 100644 --- a/cpu/arm1176/s3c64xx/cpu_init.S +++ b/cpu/arm1176/s3c64xx/cpu_init.S @@ -24,7 +24,7 @@ */ #include <config.h> -#include <s3c6400.h> +#include <asm/arch/s3c6400.h> .globl mem_ctrl_asm_init mem_ctrl_asm_init: diff --git a/cpu/arm1176/s3c64xx/reset.S b/cpu/arm1176/s3c64xx/reset.S index 315b13f..eae572e 100644 --- a/cpu/arm1176/s3c64xx/reset.S +++ b/cpu/arm1176/s3c64xx/reset.S @@ -21,7 +21,7 @@ * MA 02111-1307 USA */ -#include <s3c6400.h> +#include <asm/arch/s3c6400.h> .globl reset_cpu reset_cpu: diff --git a/cpu/arm1176/s3c64xx/speed.c b/cpu/arm1176/s3c64xx/speed.c index 5c335a5..11962ac 100644 --- a/cpu/arm1176/s3c64xx/speed.c +++ b/cpu/arm1176/s3c64xx/speed.c @@ -31,7 +31,7 @@ */ #include <common.h> -#include <s3c6400.h> +#include <asm/arch/s3c6400.h> #define APLL 0 #define MPLL 1 diff --git a/cpu/arm1176/s3c64xx/timer.c b/cpu/arm1176/s3c64xx/timer.c index 22a5b77..9768319 100644 --- a/cpu/arm1176/s3c64xx/timer.c +++ b/cpu/arm1176/s3c64xx/timer.c @@ -40,7 +40,7 @@ #include <common.h> #include <asm/proc-armv/ptrace.h> -#include <s3c6400.h> +#include <asm/arch/s3c6400.h> #include <div64.h> static ulong timer_load_val; @@ -164,7 +164,7 @@ void set_timer(ulong t) timestamp = t * (timer_load_val / (100 * CONFIG_SYS_HZ)); } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { unsigned long long tmp; ulong tmo; diff --git a/cpu/arm1176/start.S b/cpu/arm1176/start.S index cb891df..68a356d 100644 --- a/cpu/arm1176/start.S +++ b/cpu/arm1176/start.S @@ -35,7 +35,7 @@ #ifdef CONFIG_ENABLE_MMU #include <asm/proc/domain.h> #endif -#include <s3c6400.h> +#include <asm/arch/s3c6400.h> #if !defined(CONFIG_ENABLE_MMU) && !defined(CONFIG_SYS_PHY_UBOOT_BASE) #define CONFIG_SYS_PHY_UBOOT_BASE CONFIG_SYS_UBOOT_BASE @@ -241,16 +241,11 @@ mmu_enable: skip_hw_init: /* Set up the stack */ stack_setup: -#ifdef CONFIG_MEMORY_UPPER_CODE - ldr sp, =(CONFIG_SYS_UBOOT_BASE + CONFIG_SYS_UBOOT_SIZE - 0xc) -#else - ldr r0, _TEXT_BASE /* upper 128 KiB: relocated uboot */ + ldr r0, =CONFIG_SYS_UBOOT_BASE /* base of copy in DRAM */ sub r0, r0, #CONFIG_SYS_MALLOC_LEN /* malloc area */ sub r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo */ sub sp, r0, #12 /* leave 3 words for abort-stack */ -#endif - clear_bss: ldr r0, _bss_start /* find start of bss segment */ ldr r1, _bss_end /* stop here */ diff --git a/cpu/arm720t/interrupts.c b/cpu/arm720t/interrupts.c index 91d552c..eb8d425 100644 --- a/cpu/arm720t/interrupts.c +++ b/cpu/arm720t/interrupts.c @@ -224,7 +224,7 @@ void set_timer (ulong t) timestamp = t; } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo; @@ -296,7 +296,7 @@ ulong get_timer (ulong base) return timestamp - base; } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { u32 ticks; diff --git a/cpu/arm920t/a320/Makefile b/cpu/arm920t/a320/Makefile new file mode 100644 index 0000000..f030c53 --- /dev/null +++ b/cpu/arm920t/a320/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(SOC).a + +SOBJS += reset.o +COBJS += timer.o +COBJS += ftsmc020.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/cpu/arm920t/a320/ftsmc020.c b/cpu/arm920t/a320/ftsmc020.c new file mode 100644 index 0000000..7646537 --- /dev/null +++ b/cpu/arm920t/a320/ftsmc020.c @@ -0,0 +1,51 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <ratbert@faraday-tech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/arch/ftsmc020.h> + +struct ftsmc020_config { + unsigned int config; + unsigned int timing; +}; + +static struct ftsmc020_config config[] = CONFIG_SYS_FTSMC020_CONFIGS; + +static struct ftsmc020 *smc = (struct ftsmc020 *)CONFIG_FTSMC020_BASE; + +static void ftsmc020_setup_bank(unsigned int bank, struct ftsmc020_config *cfg) +{ + if (bank > 3) { + printf("bank # %u invalid\n", bank); + return; + } + + writel(cfg->config, &smc->bank[bank].cr); + writel(cfg->timing, &smc->bank[bank].tpr); +} + +void ftsmc020_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(config); i++) + ftsmc020_setup_bank(i, &config[i]); +} diff --git a/cpu/arm920t/a320/reset.S b/cpu/arm920t/a320/reset.S new file mode 100644 index 0000000..12ca527 --- /dev/null +++ b/cpu/arm920t/a320/reset.S @@ -0,0 +1,22 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <ratbert@faraday-tech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +.global reset_cpu +reset_cpu: + b reset_cpu diff --git a/cpu/arm920t/a320/timer.c b/cpu/arm920t/a320/timer.c new file mode 100644 index 0000000..bb65593 --- /dev/null +++ b/cpu/arm920t/a320/timer.c @@ -0,0 +1,193 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <ratbert@faraday-tech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/ftpmu010.h> +#include <asm/arch/fttmr010.h> + +static ulong timestamp; +static ulong lastdec; + +static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE; +static struct ftpmu010 *pmu = (struct ftpmu010 *)CONFIG_FTPMU010_BASE; + +#define TIMER_CLOCK 32768 +#define TIMER_LOAD_VAL 0xffffffff + +int timer_init(void) +{ + unsigned int oscc; + unsigned int cr; + + debug("%s()\n", __func__); + + /* disable timers */ + writel(0, &tmr->cr); + + /* + * use 32768Hz oscillator for RTC, WDT, TIMER + */ + + /* enable the 32768Hz oscillator */ + oscc = readl(&pmu->OSCC); + oscc &= ~(FTPMU010_OSCC_OSCL_OFF | FTPMU010_OSCC_OSCL_TRI); + writel(oscc, &pmu->OSCC); + + /* wait until ready */ + while (!(readl(&pmu->OSCC) & FTPMU010_OSCC_OSCL_STABLE)) + ; + + /* select 32768Hz oscillator */ + oscc = readl(&pmu->OSCC); + oscc |= FTPMU010_OSCC_OSCL_RTCLSEL; + writel(oscc, &pmu->OSCC); + + /* setup timer */ + writel(TIMER_LOAD_VAL, &tmr->timer3_load); + writel(TIMER_LOAD_VAL, &tmr->timer3_counter); + writel(0, &tmr->timer3_match1); + writel(0, &tmr->timer3_match2); + + /* we don't want timer to issue interrupts */ + writel(FTTMR010_TM3_MATCH1 | + FTTMR010_TM3_MATCH2 | + FTTMR010_TM3_OVERFLOW, + &tmr->interrupt_mask); + + cr = readl(&tmr->cr); + cr |= FTTMR010_TM3_CLOCK; /* use external clock */ + cr |= FTTMR010_TM3_ENABLE; + writel(cr, &tmr->cr); + + /* init the timestamp and lastdec value */ + reset_timer_masked(); + + return 0; +} + +/* + * timer without interrupts + */ + +/* + * reset time + */ +void reset_timer_masked(void) +{ + /* capure current decrementer value time */ + lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ); + timestamp = 0; /* start "advancing" time stamp from 0 */ + + debug("%s(): lastdec = %lx\n", __func__, lastdec); +} + +void reset_timer(void) +{ + debug("%s()\n", __func__); + reset_timer_masked(); +} + +/* + * return timer ticks + */ +ulong get_timer_masked(void) +{ + /* current tick value */ + ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ); + + debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec); + + if (lastdec >= now) { + /* + * normal mode (non roll) + * move stamp fordward with absoulte diff ticks + */ + timestamp += lastdec - now; + } else { + /* + * we have overflow of the count down timer + * + * nts = ts + ld + (TLV - now) + * ts=old stamp, ld=time that passed before passing through -1 + * (TLV-now) amount of time after passing though -1 + * nts = new "advancing time stamp"...it could also roll and + * cause problems. + */ + timestamp += lastdec + TIMER_LOAD_VAL - now; + } + + lastdec = now; + + debug("%s() returns %lx\n", __func__, timestamp); + + return timestamp; +} + +/* + * return difference between timer ticks and base + */ +ulong get_timer(ulong base) +{ + debug("%s(%lx)\n", __func__, base); + return get_timer_masked() - base; +} + +void set_timer(ulong t) +{ + debug("%s(%lx)\n", __func__, t); + timestamp = t; +} + +/* delay x useconds AND perserve advance timstamp value */ +void udelay(unsigned long usec) +{ + long tmo = usec * (TIMER_CLOCK / 1000) / 1000; + unsigned long now, last = readl(&tmr->timer3_counter); + + debug("%s(%lu)\n", __func__, usec); + while (tmo > 0) { + now = readl(&tmr->timer3_counter); + if (now > last) /* count down timer overflow */ + tmo -= TIMER_LOAD_VAL + last - now; + else + tmo -= last - now; + last = now; + } +} + +/* + * This function is derived from PowerPC code (read timebase as long long). + * On ARM it just returns the timer value. + */ +unsigned long long get_ticks(void) +{ + debug("%s()\n", __func__); + return get_timer(0); +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + debug("%s()\n", __func__); + return CONFIG_SYS_HZ; +} diff --git a/cpu/arm920t/at91rm9200/timer.c b/cpu/arm920t/at91rm9200/timer.c index 235d107..9c54bbe 100644 --- a/cpu/arm920t/at91rm9200/timer.c +++ b/cpu/arm920t/at91rm9200/timer.c @@ -87,7 +87,7 @@ void set_timer (ulong t) timestamp = t; } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { udelay_masked(usec); } diff --git a/cpu/arm920t/imx/timer.c b/cpu/arm920t/imx/timer.c index 31ec588..b06b518 100644 --- a/cpu/arm920t/imx/timer.c +++ b/cpu/arm920t/imx/timer.c @@ -89,7 +89,7 @@ void udelay_masked (unsigned long usec) } while (diff >= 0); } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { udelay_masked(usec); } diff --git a/cpu/arm920t/ks8695/timer.c b/cpu/arm920t/ks8695/timer.c index 22987bc..886e370 100644 --- a/cpu/arm920t/ks8695/timer.c +++ b/cpu/arm920t/ks8695/timer.c @@ -81,7 +81,7 @@ void set_timer(ulong t) timer_ticks = t; } -void udelay(ulong usec) +void __udelay(ulong usec) { ulong start = get_timer_masked(); ulong end; diff --git a/cpu/arm920t/s3c24x0/interrupts.c b/cpu/arm920t/s3c24x0/interrupts.c index 9148946..879fda6 100644 --- a/cpu/arm920t/s3c24x0/interrupts.c +++ b/cpu/arm920t/s3c24x0/interrupts.c @@ -31,11 +31,7 @@ #include <common.h> -#if defined(CONFIG_S3C2400) -#include <s3c2400.h> -#elif defined(CONFIG_S3C2410) -#include <s3c2410.h> -#endif +#include <asm/arch/s3c24x0_cpu.h> #include <asm/proc-armv/ptrace.h> void do_irq (struct pt_regs *pt_regs) diff --git a/cpu/arm920t/s3c24x0/speed.c b/cpu/arm920t/s3c24x0/speed.c index 136c779..b13283a 100644 --- a/cpu/arm920t/s3c24x0/speed.c +++ b/cpu/arm920t/s3c24x0/speed.c @@ -30,15 +30,10 @@ */ #include <common.h> -#if defined(CONFIG_S3C2400) || defined (CONFIG_S3C2410) || defined (CONFIG_TRAB) +#ifdef CONFIG_S3C24X0 #include <asm/io.h> - -#if defined(CONFIG_S3C2400) -#include <s3c2400.h> -#elif defined(CONFIG_S3C2410) -#include <s3c2410.h> -#endif +#include <asm/arch/s3c24x0_cpu.h> #define MPLL 0 #define UPLL 1 @@ -100,6 +95,4 @@ ulong get_UCLK(void) return get_PLLCLK(UPLL); } -#endif /* defined(CONFIG_S3C2400) || - defined (CONFIG_S3C2410) || - defined (CONFIG_TRAB) */ +#endif /* CONFIG_S3C24X0 */ diff --git a/cpu/arm920t/s3c24x0/timer.c b/cpu/arm920t/s3c24x0/timer.c index a27f0e2..7d47354 100644 --- a/cpu/arm920t/s3c24x0/timer.c +++ b/cpu/arm920t/s3c24x0/timer.c @@ -30,17 +30,10 @@ */ #include <common.h> -#if defined(CONFIG_S3C2400) || \ - defined(CONFIG_S3C2410) || \ - defined(CONFIG_TRAB) +#ifdef CONFIG_S3C24X0 #include <asm/io.h> - -#if defined(CONFIG_S3C2400) -#include <s3c2400.h> -#elif defined(CONFIG_S3C2410) -#include <s3c2410.h> -#endif +#include <asm/arch/s3c24x0_cpu.h> int timer_load_val = 0; static ulong timer_clk; @@ -106,7 +99,7 @@ void set_timer(ulong t) timestamp = t; } -void udelay(unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo; ulong start = get_ticks(); @@ -227,6 +220,4 @@ void reset_cpu(ulong ignored) /*NOTREACHED*/ } -#endif /* defined(CONFIG_S3C2400) || - defined (CONFIG_S3C2410) || - defined (CONFIG_TRAB) */ +#endif /* CONFIG_S3C24X0 */ diff --git a/cpu/arm920t/s3c24x0/usb.c b/cpu/arm920t/s3c24x0/usb.c index b5ba8c4..e468ed0 100644 --- a/cpu/arm920t/s3c24x0/usb.c +++ b/cpu/arm920t/s3c24x0/usb.c @@ -23,15 +23,11 @@ #include <common.h> -#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) -# if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) - -#if defined(CONFIG_S3C2400) -# include <s3c2400.h> -#elif defined(CONFIG_S3C2410) -# include <s3c2410.h> -#endif +#if defined(CONFIG_USB_OHCI_NEW) && \ + defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \ + defined(CONFIG_S3C24X0) +#include <asm/arch/s3c24x0_cpu.h> #include <asm/io.h> int usb_cpu_init(void) @@ -70,5 +66,6 @@ int usb_cpu_init_fail(void) return 0; } -# endif /* defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) */ -#endif /* defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */ +#endif /* defined(CONFIG_USB_OHCI_NEW) && \ + defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \ + defined(CONFIG_S3C24X0) */ diff --git a/cpu/arm920t/s3c24x0/usb_ohci.c b/cpu/arm920t/s3c24x0/usb_ohci.c index 7672e4c..5aa8d64 100644 --- a/cpu/arm920t/s3c24x0/usb_ohci.c +++ b/cpu/arm920t/s3c24x0/usb_ohci.c @@ -36,14 +36,9 @@ #include <common.h> /* #include <pci.h> no PCI on the S3C24X0 */ -#ifdef CONFIG_USB_OHCI - -#if defined(CONFIG_S3C2400) -#include <s3c2400.h> -#elif defined(CONFIG_S3C2410) -#include <s3c2410.h> -#endif +#if defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0) +#include <asm/arch/s3c24x0_cpu.h> #include <asm/io.h> #include <malloc.h> #include <usb.h> @@ -1757,4 +1752,4 @@ int usb_lowlevel_stop(void) return 0; } -#endif /* CONFIG_USB_OHCI */ +#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0) */ diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S index 114427a..779f192 100644 --- a/cpu/arm920t/start.S +++ b/cpu/arm920t/start.S @@ -131,7 +131,7 @@ copyex: bne copyex #endif -#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) +#ifdef CONFIG_S3C24X0 /* turn off the watchdog */ # if defined(CONFIG_S3C2400) @@ -166,7 +166,7 @@ copyex: ldr r0, =CLKDIVN mov r1, #3 str r1, [r0] -#endif /* CONFIG_S3C2400 || CONFIG_S3C2410 */ +#endif /* CONFIG_S3C24X0 */ /* * we do sys-critical inits only at reboot, diff --git a/cpu/arm925t/timer.c b/cpu/arm925t/timer.c index c16ef25..7dfe2b5 100644 --- a/cpu/arm925t/timer.c +++ b/cpu/arm925t/timer.c @@ -81,7 +81,7 @@ void set_timer (ulong t) } /* delay x useconds AND preserve advance timestamp value */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { int32_t tmo = usec * (TIMER_CLOCK / 1000) / 1000; uint32_t now, last = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM); diff --git a/cpu/arm926ejs/at91/timer.c b/cpu/arm926ejs/at91/timer.c index 811bb3c..7352b5c 100644 --- a/cpu/arm926ejs/at91/timer.c +++ b/cpu/arm926ejs/at91/timer.c @@ -105,7 +105,7 @@ ulong get_timer_masked(void) return tick_to_time(get_ticks()); } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { unsigned long long tmp; ulong tmo; diff --git a/cpu/arm926ejs/davinci/cpu.c b/cpu/arm926ejs/davinci/cpu.c index 390cab8..fc3551c 100644 --- a/cpu/arm926ejs/davinci/cpu.c +++ b/cpu/arm926ejs/davinci/cpu.c @@ -23,7 +23,7 @@ #include <common.h> #include <netdev.h> #include <asm/arch/hardware.h> - +#include <asm/io.h> /* offsets from PLL controller base */ #define PLLC_PLLCTL 0x100 @@ -60,6 +60,54 @@ #define DDR_PLLDIV PLLC_PLLDIV1 #endif +#ifdef CONFIG_SOC_DA8XX +const dv_reg * const sysdiv[7] = { + &davinci_pllc_regs->plldiv1, &davinci_pllc_regs->plldiv2, + &davinci_pllc_regs->plldiv3, &davinci_pllc_regs->plldiv4, + &davinci_pllc_regs->plldiv5, &davinci_pllc_regs->plldiv6, + &davinci_pllc_regs->plldiv7 +}; + +int clk_get(enum davinci_clk_ids id) +{ + int pre_div; + int pllm; + int post_div; + int pll_out; + + pll_out = CONFIG_SYS_OSCIN_FREQ; + + if (id == DAVINCI_AUXCLK_CLKID) + goto out; + + /* + * Lets keep this simple. Combining operations can result in + * unexpected approximations + */ + pre_div = (readl(&davinci_pllc_regs->prediv) & + DAVINCI_PLLC_DIV_MASK) + 1; + pllm = readl(&davinci_pllc_regs->pllm) + 1; + + pll_out /= pre_div; + pll_out *= pllm; + + if (id == DAVINCI_PLLM_CLKID) + goto out; + + post_div = (readl(&davinci_pllc_regs->postdiv) & + DAVINCI_PLLC_DIV_MASK) + 1; + + pll_out /= post_div; + + if (id == DAVINCI_PLLC_CLKID) + goto out; + + pll_out /= (readl(sysdiv[id - 1]) & DAVINCI_PLLC_DIV_MASK) + 1; + +out: + return pll_out; +} +#endif /* CONFIG_SOC_DA8XX */ #ifdef CONFIG_DISPLAY_CPUINFO diff --git a/cpu/arm926ejs/davinci/psc.c b/cpu/arm926ejs/davinci/psc.c index 5bb972f..8273a7f 100644 --- a/cpu/arm926ejs/davinci/psc.c +++ b/cpu/arm926ejs/davinci/psc.c @@ -25,6 +25,7 @@ #include <common.h> #include <asm/arch/hardware.h> +#include <asm/io.h> /* * The PSC manages three inputs to a "module" which may be a peripheral or @@ -47,21 +48,45 @@ /* Works on Always On power domain only (no PD argument) */ void lpsc_on(unsigned int id) { - dv_reg_p mdstat, mdctl; + dv_reg_p mdstat, mdctl, ptstat, ptcmd; +#ifdef CONFIG_SOC_DA8XX + struct davinci_psc_regs *psc_regs; +#endif +#ifndef CONFIG_SOC_DA8XX if (id >= DAVINCI_LPSC_GEM) return; /* Don't work on DSP Power Domain */ mdstat = REG_P(PSC_MDSTAT_BASE + (id * 4)); mdctl = REG_P(PSC_MDCTL_BASE + (id * 4)); + ptstat = REG_P(PSC_PTSTAT); + ptcmd = REG_P(PSC_PTCMD); +#else + if (id < DAVINCI_LPSC_PSC1_BASE) { + if (id >= PSC_PSC0_MODULE_ID_CNT) + return; + psc_regs = davinci_psc0_regs; + mdstat = &psc_regs->psc0.mdstat[id]; + mdctl = &psc_regs->psc0.mdctl[id]; + } else { + id -= DAVINCI_LPSC_PSC1_BASE; + if (id >= PSC_PSC1_MODULE_ID_CNT) + return; + psc_regs = davinci_psc1_regs; + mdstat = &psc_regs->psc1.mdstat[id]; + mdctl = &psc_regs->psc1.mdctl[id]; + } + ptstat = &psc_regs->ptstat; + ptcmd = &psc_regs->ptcmd; +#endif - while (REG(PSC_PTSTAT) & 0x01) + while (readl(ptstat) & 0x01) continue; - if ((*mdstat & 0x1f) == 0x03) - return; /* Already on and enabled */ + if ((readl(mdstat) & 0x1f) == 0x03) + return; /* Already on and enabled */ - *mdctl |= 0x03; + writel(readl(mdctl) | 0x03, mdctl); switch (id) { #ifdef CONFIG_SOC_DM644X @@ -80,16 +105,16 @@ void lpsc_on(unsigned int id) case DAVINCI_LPSC_MEMSTICK: case DAVINCI_LPSC_McBSP: case DAVINCI_LPSC_GPIO: - *mdctl |= 0x200; + writel(readl(mdctl) | 0x200, mdctl); break; #endif } - REG(PSC_PTCMD) = 0x01; + writel(0x01, ptcmd); - while (REG(PSC_PTSTAT) & 0x03) + while (readl(ptstat) & 0x01) continue; - while ((*mdstat & 0x1f) != 0x03) /* Probably an overkill... */ + while ((readl(mdstat) & 0x1f) != 0x03) continue; } diff --git a/cpu/arm926ejs/davinci/timer.c b/cpu/arm926ejs/davinci/timer.c index 80751ad..9da7443 100644 --- a/cpu/arm926ejs/davinci/timer.c +++ b/cpu/arm926ejs/davinci/timer.c @@ -38,8 +38,9 @@ */ #include <common.h> +#include <asm/io.h> -typedef volatile struct { +struct davinci_timer { u_int32_t pid12; u_int32_t emumgt; u_int32_t na1; @@ -51,9 +52,10 @@ typedef volatile struct { u_int32_t tcr; u_int32_t tgcr; u_int32_t wdtcr; -} davinci_timer; +}; -davinci_timer *timer = (davinci_timer *)CONFIG_SYS_TIMERBASE; +static struct davinci_timer * const timer = + (struct davinci_timer *)CONFIG_SYS_TIMERBASE; #define TIMER_LOAD_VAL (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ) #define TIM_CLK_DIV 16 @@ -64,30 +66,30 @@ static ulong lastinc; int timer_init(void) { /* We are using timer34 in unchained 32-bit mode, full speed */ - timer->tcr = 0x0; - timer->tgcr = 0x0; - timer->tgcr = 0x06 | ((TIM_CLK_DIV - 1) << 8); - timer->tim34 = 0x0; - timer->prd34 = TIMER_LOAD_VAL; + writel(0x0, &timer->tcr); + writel(0x0, &timer->tgcr); + writel(0x06 | ((TIM_CLK_DIV - 1) << 8), &timer->tgcr); + writel(0x0, &timer->tim34); + writel(TIMER_LOAD_VAL, &timer->prd34); lastinc = 0; timestamp = 0; - timer->tcr = 2 << 22; + writel(2 << 22, &timer->tcr); return(0); } void reset_timer(void) { - timer->tcr = 0x0; - timer->tim34 = 0; + writel(0x0, &timer->tcr); + writel(0x0, &timer->tim34); lastinc = 0; timestamp = 0; - timer->tcr = 2 << 22; + writel(2 << 22, &timer->tcr); } static ulong get_timer_raw(void) { - ulong now = timer->tim34; + ulong now = readl(&timer->tim34); if (now >= lastinc) { /* normal mode */ @@ -110,7 +112,7 @@ void set_timer(ulong t) timestamp = t; } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { ulong tmo; ulong endtime; diff --git a/cpu/arm926ejs/kirkwood/timer.c b/cpu/arm926ejs/kirkwood/timer.c index 817ff42..2ec6a93 100644 --- a/cpu/arm926ejs/kirkwood/timer.c +++ b/cpu/arm926ejs/kirkwood/timer.c @@ -125,7 +125,7 @@ void set_timer(ulong t) timestamp = t; } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { uint current; ulong delayticks; diff --git a/cpu/arm926ejs/mx27/timer.c b/cpu/arm926ejs/mx27/timer.c index 9011058..8f1d47b 100644 --- a/cpu/arm926ejs/mx27/timer.c +++ b/cpu/arm926ejs/mx27/timer.c @@ -177,7 +177,7 @@ void set_timer (ulong t) } /* delay x useconds AND preserve advance timstamp value */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { unsigned long long tmp; ulong tmo; diff --git a/cpu/arm926ejs/nomadik/timer.c b/cpu/arm926ejs/nomadik/timer.c index 16067c9..047b9e3 100644 --- a/cpu/arm926ejs/nomadik/timer.c +++ b/cpu/arm926ejs/nomadik/timer.c @@ -59,7 +59,7 @@ ulong get_timer(ulong base) } /* Delay x useconds */ -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { ulong ini, end; diff --git a/cpu/arm926ejs/omap/timer.c b/cpu/arm926ejs/omap/timer.c index 392b158..2ac38c4 100644 --- a/cpu/arm926ejs/omap/timer.c +++ b/cpu/arm926ejs/omap/timer.c @@ -80,7 +80,7 @@ void set_timer (ulong t) } /* delay x useconds AND perserve advance timstamp value */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo, tmp; diff --git a/cpu/arm926ejs/versatile/timer.c b/cpu/arm926ejs/versatile/timer.c index 50c1335..563db36 100755 --- a/cpu/arm926ejs/versatile/timer.c +++ b/cpu/arm926ejs/versatile/timer.c @@ -109,7 +109,7 @@ void set_timer (ulong t) } /* delay x useconds AND perserve advance timstamp value */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo, tmp; diff --git a/cpu/arm_cortexa8/omap3/mem.c b/cpu/arm_cortexa8/omap3/mem.c index 8b8cd6d..dfb7e4c 100644 --- a/cpu/arm_cortexa8/omap3/mem.c +++ b/cpu/arm_cortexa8/omap3/mem.c @@ -161,10 +161,11 @@ void do_sdrc_init(u32 cs, u32 early) writel(0, &sdrc_base->sysconfig); /* setup sdrc to ball mux */ - writel(SDP_SDRC_SHARING, &sdrc_base->sharing); + writel(SDRC_SHARING, &sdrc_base->sharing); /* Disable Power Down of CKE cuz of 1 CKE on combo part */ - writel(SRFRONRESET | PAGEPOLICY_HIGH, &sdrc_base->power); + writel(WAKEUPPROC | PWDNEN | SRFRONRESET | PAGEPOLICY_HIGH, + &sdrc_base->power); writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); sdelay(0x20000); diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c index 31b2003..08fb32e 100644 --- a/cpu/arm_cortexa8/omap3/sys_info.c +++ b/cpu/arm_cortexa8/omap3/sys_info.c @@ -109,7 +109,7 @@ u32 get_cpu_rev(void) ****************************************************/ u32 is_mem_sdr(void) { - if (readl(&sdrc_base->cs[CS0].mr) == SDP_SDRC_MR_0_SDR) + if (readl(&sdrc_base->cs[CS0].mr) == SDRC_MR_0_SDR) return 1; return 0; } diff --git a/cpu/arm_cortexa8/omap3/timer.c b/cpu/arm_cortexa8/omap3/timer.c index 12a16b3..401bfe6 100644 --- a/cpu/arm_cortexa8/omap3/timer.c +++ b/cpu/arm_cortexa8/omap3/timer.c @@ -82,7 +82,7 @@ void set_timer(ulong t) } /* delay x useconds */ -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { long tmo = usec * (TIMER_CLOCK / 1000) / 1000; unsigned long now, last = readl(&timer_base->tcrr); diff --git a/cpu/arm_cortexa8/s5pc1xx/timer.c b/cpu/arm_cortexa8/s5pc1xx/timer.c index cdba5d9..c5df5c5 100644 --- a/cpu/arm_cortexa8/s5pc1xx/timer.c +++ b/cpu/arm_cortexa8/s5pc1xx/timer.c @@ -115,7 +115,7 @@ void set_timer(unsigned long t) } /* delay x useconds */ -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { unsigned long tmo, tmp; diff --git a/cpu/at32ap/Makefile b/cpu/at32ap/Makefile index e08f273..60899c7 100644 --- a/cpu/at32ap/Makefile +++ b/cpu/at32ap/Makefile @@ -30,7 +30,7 @@ LIB := $(obj)lib$(CPU).a START-y += start.o COBJS-y += cpu.o -COBJS-y += hsdramc.o +COBJS-$(CONFIG_SYS_HSDRAMC) += hsdramc.o COBJS-y += exception.o COBJS-y += cache.o COBJS-y += interrupts.o diff --git a/cpu/at32ap/hsdramc.c b/cpu/at32ap/hsdramc.c index f74121c..b6eae66 100644 --- a/cpu/at32ap/hsdramc.c +++ b/cpu/at32ap/hsdramc.c @@ -21,7 +21,6 @@ */ #include <common.h> -#ifdef CONFIG_SYS_HSDRAMC #include <asm/io.h> #include <asm/sdram.h> @@ -116,5 +115,3 @@ unsigned long sdram_init(void *sdram_base, const struct sdram_config *config) return sdram_size; } - -#endif /* CONFIG_SYS_HSDRAMC */ diff --git a/cpu/at32ap/interrupts.c b/cpu/at32ap/interrupts.c index 75cc39e..c6d8d16 100644 --- a/cpu/at32ap/interrupts.c +++ b/cpu/at32ap/interrupts.c @@ -96,7 +96,7 @@ void set_timer(unsigned long t) /* * For short delays only. It will overflow after a few seconds. */ -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { unsigned long cycles; unsigned long base; diff --git a/cpu/blackfin/interrupts.c b/cpu/blackfin/interrupts.c index 19456e5..921bfe0 100644 --- a/cpu/blackfin/interrupts.c +++ b/cpu/blackfin/interrupts.c @@ -64,7 +64,7 @@ int disable_interrupts(void) return 1; } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { unsigned long delay, start, stop; unsigned long cclk; diff --git a/cpu/i386/Makefile b/cpu/i386/Makefile index e98bd3d..c658c6e 100644 --- a/cpu/i386/Makefile +++ b/cpu/i386/Makefile @@ -29,7 +29,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(CPU).a START = start.o start16.o resetvec.o -COBJS = serial.o interrupts.o exceptions.o cpu.o +COBJS = serial.o interrupts.o cpu.o SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) diff --git a/cpu/i386/cpu.c b/cpu/i386/cpu.c index d91e33b..3010519 100644 --- a/cpu/i386/cpu.c +++ b/cpu/i386/cpu.c @@ -37,7 +37,7 @@ #include <command.h> #include <asm/interrupt.h> -int cpu_init(void) +int cpu_init_f(void) { /* initialize FPU, reset EM, set MP and NE */ asm ("fninit\n" \ @@ -46,10 +46,13 @@ int cpu_init(void) "orl $0x22, %eax\n" \ "movl %eax, %cr0\n" ); + return 0; +} + +int cpu_init_r(void) +{ /* Initialize core interrupt and exception functionality of CPU */ cpu_init_interrupts (); - cpu_init_exceptions (); - return 0; } @@ -74,6 +77,8 @@ void __attribute__ ((regparm(0))) generate_gpf(void); /* segment 0x70 is an arbitrary segment which does not exist */ asm(".globl generate_gpf\n" + ".hidden generate_gpf\n" + ".type generate_gpf, @function\n" "generate_gpf:\n" "ljmp $0x70, $0x47114711\n"); diff --git a/cpu/i386/exceptions.c b/cpu/i386/exceptions.c deleted file mode 100644 index bc3d434..0000000 --- a/cpu/i386/exceptions.c +++ /dev/null @@ -1,229 +0,0 @@ -/* - * (C) Copyright 2002 - * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/interrupt.h> - -asm (".globl exp_return\n" - "exp_return:\n" - " addl $12, %esp\n" - " pop %esp\n" - " popa\n" - " iret\n"); - -char exception_stack[4096]; - -/* - * For detailed description of each exception, refer to: - * Intel® 64 and IA-32 Architectures Software Developer's Manual - * Volume 1: Basic Architecture - * Order Number: 253665-029US, November 2008 - * Table 6-1. Exceptions and Interrupts - */ -DECLARE_EXCEPTION(0, divide_error_entry); -DECLARE_EXCEPTION(1, debug_entry); -DECLARE_EXCEPTION(2, nmi_interrupt_entry); -DECLARE_EXCEPTION(3, breakpoint_entry); -DECLARE_EXCEPTION(4, overflow_entry); -DECLARE_EXCEPTION(5, bound_range_exceeded_entry); -DECLARE_EXCEPTION(6, invalid_opcode_entry); -DECLARE_EXCEPTION(7, device_not_available_entry); -DECLARE_EXCEPTION(8, double_fault_entry); -DECLARE_EXCEPTION(9, coprocessor_segment_overrun_entry); -DECLARE_EXCEPTION(10, invalid_tss_entry); -DECLARE_EXCEPTION(11, segment_not_present_entry); -DECLARE_EXCEPTION(12, stack_segment_fault_entry); -DECLARE_EXCEPTION(13, general_protection_entry); -DECLARE_EXCEPTION(14, page_fault_entry); -DECLARE_EXCEPTION(15, reserved_exception_entry); -DECLARE_EXCEPTION(16, floating_point_error_entry); -DECLARE_EXCEPTION(17, alignment_check_entry); -DECLARE_EXCEPTION(18, machine_check_entry); -DECLARE_EXCEPTION(19, simd_floating_point_exception_entry); -DECLARE_EXCEPTION(20, reserved_exception_entry); -DECLARE_EXCEPTION(21, reserved_exception_entry); -DECLARE_EXCEPTION(22, reserved_exception_entry); -DECLARE_EXCEPTION(23, reserved_exception_entry); -DECLARE_EXCEPTION(24, reserved_exception_entry); -DECLARE_EXCEPTION(25, reserved_exception_entry); -DECLARE_EXCEPTION(26, reserved_exception_entry); -DECLARE_EXCEPTION(27, reserved_exception_entry); -DECLARE_EXCEPTION(28, reserved_exception_entry); -DECLARE_EXCEPTION(29, reserved_exception_entry); -DECLARE_EXCEPTION(30, reserved_exception_entry); -DECLARE_EXCEPTION(31, reserved_exception_entry); - -__isr__ reserved_exception_entry(int cause, int ip, int seg) -{ - printf("Reserved Exception %d at %04x:%08x\n", cause, seg, ip); -} - -__isr__ divide_error_entry(int cause, int ip, int seg) -{ - printf("Divide Error (Division by zero) at %04x:%08x\n", seg, ip); - while(1); -} - -__isr__ debug_entry(int cause, int ip, int seg) -{ - printf("Debug Interrupt (Single step) at %04x:%08x\n", seg, ip); -} - -__isr__ nmi_interrupt_entry(int cause, int ip, int seg) -{ - printf("NMI Interrupt at %04x:%08x\n", seg, ip); -} - -__isr__ breakpoint_entry(int cause, int ip, int seg) -{ - printf("Breakpoint at %04x:%08x\n", seg, ip); -} - -__isr__ overflow_entry(int cause, int ip, int seg) -{ - printf("Overflow at %04x:%08x\n", seg, ip); - while(1); -} - -__isr__ bound_range_exceeded_entry(int cause, int ip, int seg) -{ - printf("BOUND Range Exceeded at %04x:%08x\n", seg, ip); - while(1); -} - -__isr__ invalid_opcode_entry(int cause, int ip, int seg) -{ - printf("Invalid Opcode (UnDefined Opcode) at %04x:%08x\n", seg, ip); - while(1); -} - -__isr__ device_not_available_entry(int cause, int ip, int seg) -{ - printf("Device Not Available (No Math Coprocessor) at %04x:%08x\n", seg, ip); - while(1); -} - -__isr__ double_fault_entry(int cause, int ip, int seg) -{ - printf("Double fault at %04x:%08x\n", seg, ip); - while(1); -} - -__isr__ coprocessor_segment_overrun_entry(int cause, int ip, int seg) -{ - printf("Co-processor segment overrun at %04x:%08x\n", seg, ip); - while(1); -} - -__isr__ invalid_tss_entry(int cause, int ip, int seg) -{ - printf("Invalid TSS at %04x:%08x\n", seg, ip); -} - -__isr__ segment_not_present_entry(int cause, int ip, int seg) -{ - printf("Segment Not Present at %04x:%08x\n", seg, ip); - while(1); -} - -__isr__ stack_segment_fault_entry(int cause, int ip, int seg) -{ - printf("Stack Segment Fault at %04x:%08x\n", seg, ip); - while(1); -} - -__isr__ general_protection_entry(int cause, int ip, int seg) -{ - printf("General Protection at %04x:%08x\n", seg, ip); -} - -__isr__ page_fault_entry(int cause, int ip, int seg) -{ - printf("Page fault at %04x:%08x\n", seg, ip); - while(1); -} - -__isr__ floating_point_error_entry(int cause, int ip, int seg) -{ - printf("Floating-Point Error (Math Fault) at %04x:%08x\n", seg, ip); -} - -__isr__ alignment_check_entry(int cause, int ip, int seg) -{ - printf("Alignment check at %04x:%08x\n", seg, ip); -} - -__isr__ machine_check_entry(int cause, int ip, int seg) -{ - printf("Machine Check at %04x:%08x\n", seg, ip); -} - -__isr__ simd_floating_point_exception_entry(int cause, int ip, int seg) -{ - printf("SIMD Floating-Point Exception at %04x:%08x\n", seg, ip); -} - -int cpu_init_exceptions(void) -{ - /* Just in case... */ - disable_interrupts(); - - /* Setup exceptions */ - set_vector(0x00, exp_0); - set_vector(0x01, exp_1); - set_vector(0x02, exp_2); - set_vector(0x03, exp_3); - set_vector(0x04, exp_4); - set_vector(0x05, exp_5); - set_vector(0x06, exp_6); - set_vector(0x07, exp_7); - set_vector(0x08, exp_8); - set_vector(0x09, exp_9); - set_vector(0x0a, exp_10); - set_vector(0x0b, exp_11); - set_vector(0x0c, exp_12); - set_vector(0x0d, exp_13); - set_vector(0x0e, exp_14); - set_vector(0x0f, exp_15); - set_vector(0x10, exp_16); - set_vector(0x11, exp_17); - set_vector(0x12, exp_18); - set_vector(0x13, exp_19); - set_vector(0x14, exp_20); - set_vector(0x15, exp_21); - set_vector(0x16, exp_22); - set_vector(0x17, exp_23); - set_vector(0x18, exp_24); - set_vector(0x19, exp_25); - set_vector(0x1a, exp_26); - set_vector(0x1b, exp_27); - set_vector(0x1c, exp_28); - set_vector(0x1d, exp_29); - set_vector(0x1e, exp_30); - set_vector(0x1f, exp_31); - - /* It is now safe to enable interrupts */ - enable_interrupts(); - - return 0; -} diff --git a/cpu/i386/interrupts.c b/cpu/i386/interrupts.c index 063ea42..4b57437 100644 --- a/cpu/i386/interrupts.c +++ b/cpu/i386/interrupts.c @@ -1,4 +1,7 @@ /* + * (C) Copyright 2008 + * Graeme Russ, graeme.russ@gmail.com. + * * (C) Copyright 2002 * Daniel Engström, Omicron Ceti AB, daniel@omicron.se. * @@ -24,6 +27,16 @@ #include <common.h> #include <asm/interrupt.h> +#define DECLARE_INTERRUPT(x) \ + ".globl irq_"#x"\n" \ + ".hidden irq_"#x"\n" \ + ".type irq_"#x", @function\n" \ + "irq_"#x":\n" \ + "pushl %ebp\n" \ + "movl %esp,%ebp\n" \ + "pusha\n" \ + "pushl $"#x"\n" \ + "jmp irq_common_entry\n" struct idt_entry { u16 base_low; @@ -33,35 +46,37 @@ struct idt_entry { u16 base_high; } __attribute__ ((packed)); +struct desc_ptr { + unsigned short size; + unsigned long address; + unsigned short segment; +} __attribute__((packed)); struct idt_entry idt[256]; +struct desc_ptr idt_ptr; -asm (".globl irq_return\n" - "irq_return:\n" - " addl $4, %esp\n" - " popa\n" - " iret\n"); - -void __attribute__ ((regparm(0))) default_isr(void); -asm ("default_isr: iret\n"); - -asm ("idt_ptr:\n" - ".word 0x800\n" /* size of the table 8*256 bytes */ - ".long idt\n" /* offset */ - ".word 0x18\n");/* data segment */ +static inline void load_idt(const struct desc_ptr *dtr) +{ + asm volatile("cs lidt %0"::"m" (*dtr)); +} void set_vector(u8 intnum, void *routine) { - idt[intnum].base_high = (u16)((u32)(routine + gd->reloc_off) >> 16); - idt[intnum].base_low = (u16)((u32)(routine + gd->reloc_off) & 0xffff); + idt[intnum].base_high = (u16)((u32)(routine) >> 16); + idt[intnum].base_low = (u16)((u32)(routine) & 0xffff); } +void irq_0(void); +void irq_1(void); int cpu_init_interrupts(void) { int i; + int irq_entry_size = irq_1 - irq_0; + void *irq_entry = (void *)irq_0; + /* Just in case... */ disable_interrupts(); @@ -70,10 +85,15 @@ int cpu_init_interrupts(void) idt[i].access = 0x8e; idt[i].res = 0; idt[i].selector = 0x10; - set_vector(i, default_isr); + set_vector(i, irq_entry); + irq_entry += irq_entry_size; } - asm ("cs lidt idt_ptr\n"); + idt_ptr.size = 256 * 8; + idt_ptr.address = (unsigned long) idt; + idt_ptr.segment = 0x18; + + load_idt(&idt_ptr); /* It is now safe to enable interrupts */ enable_interrupts(); @@ -81,6 +101,12 @@ int cpu_init_interrupts(void) return 0; } +void __do_irq(int irq) +{ + printf("Unhandled IRQ : %d\n", irq); +} +void do_irq(int irq) __attribute__((weak, alias("__do_irq"))); + void enable_interrupts(void) { asm("sti\n"); @@ -94,3 +120,382 @@ int disable_interrupts(void) return (flags&0x200); /* IE flags is bit 9 */ } + +/* IRQ Low-Level Service Routine */ +__isr__ irq_llsr(int ip, int seg, int irq) +{ + /* + * For detailed description of each exception, refer to: + * Intel® 64 and IA-32 Architectures Software Developer's Manual + * Volume 1: Basic Architecture + * Order Number: 253665-029US, November 2008 + * Table 6-1. Exceptions and Interrupts + */ + switch (irq) { + case 0x00: + printf("Divide Error (Division by zero) at %04x:%08x\n", seg, ip); + while(1); + break; + case 0x01: + printf("Debug Interrupt (Single step) at %04x:%08x\n", seg, ip); + break; + case 0x02: + printf("NMI Interrupt at %04x:%08x\n", seg, ip); + break; + case 0x03: + printf("Breakpoint at %04x:%08x\n", seg, ip); + break; + case 0x04: + printf("Overflow at %04x:%08x\n", seg, ip); + while(1); + break; + case 0x05: + printf("BOUND Range Exceeded at %04x:%08x\n", seg, ip); + while(1); + break; + case 0x06: + printf("Invalid Opcode (UnDefined Opcode) at %04x:%08x\n", seg, ip); + while(1); + break; + case 0x07: + printf("Device Not Available (No Math Coprocessor) at %04x:%08x\n", seg, ip); + while(1); + break; + case 0x08: + printf("Double fault at %04x:%08x\n", seg, ip); + while(1); + break; + case 0x09: + printf("Co-processor segment overrun at %04x:%08x\n", seg, ip); + while(1); + break; + case 0x0a: + printf("Invalid TSS at %04x:%08x\n", seg, ip); + break; + case 0x0b: + printf("Segment Not Present at %04x:%08x\n", seg, ip); + while(1); + break; + case 0x0c: + printf("Stack Segment Fault at %04x:%08x\n", seg, ip); + while(1); + break; + case 0x0d: + printf("General Protection at %04x:%08x\n", seg, ip); + break; + case 0x0e: + printf("Page fault at %04x:%08x\n", seg, ip); + while(1); + break; + case 0x0f: + printf("Floating-Point Error (Math Fault) at %04x:%08x\n", seg, ip); + break; + case 0x10: + printf("Alignment check at %04x:%08x\n", seg, ip); + break; + case 0x11: + printf("Machine Check at %04x:%08x\n", seg, ip); + break; + case 0x12: + printf("SIMD Floating-Point Exception at %04x:%08x\n", seg, ip); + break; + case 0x13: + case 0x14: + case 0x15: + case 0x16: + case 0x17: + case 0x18: + case 0x19: + case 0x1a: + case 0x1b: + case 0x1c: + case 0x1d: + case 0x1e: + case 0x1f: + printf("Reserved Exception %d at %04x:%08x\n", irq, seg, ip); + break; + + default: + /* Hardware or User IRQ */ + do_irq(irq); + } +} + +/* + * OK - This looks really horrible, but it serves a purpose - It helps create + * fully relocatable code. + * - The call to irq_llsr will be a relative jump + * - The IRQ entries will be guaranteed to be in order + * It's a bit annoying that we need to waste 3 bytes per interrupt entry + * (total of 768 code bytes), but we MUST create a Stack Frame and this is + * the easiest way I could do it. Maybe it can be made better later. + */ +asm(".globl irq_common_entry\n" \ + ".hidden irq_common_entry\n" \ + ".type irq_common_entry, @function\n" \ + "irq_common_entry:\n" \ + "pushl $0\n" \ + "pushl $0\n" \ + "call irq_llsr\n" \ + "popl %eax\n" \ + "popl %eax\n" \ + "popl %eax\n" \ + "popa\n" \ + "leave\n"\ + "iret\n" \ + DECLARE_INTERRUPT(0) \ + DECLARE_INTERRUPT(1) \ + DECLARE_INTERRUPT(2) \ + DECLARE_INTERRUPT(3) \ + DECLARE_INTERRUPT(4) \ + DECLARE_INTERRUPT(5) \ + DECLARE_INTERRUPT(6) \ + DECLARE_INTERRUPT(7) \ + DECLARE_INTERRUPT(8) \ + DECLARE_INTERRUPT(9) \ + DECLARE_INTERRUPT(10) \ + DECLARE_INTERRUPT(11) \ + DECLARE_INTERRUPT(12) \ + DECLARE_INTERRUPT(13) \ + DECLARE_INTERRUPT(14) \ + DECLARE_INTERRUPT(15) \ + DECLARE_INTERRUPT(16) \ + DECLARE_INTERRUPT(17) \ + DECLARE_INTERRUPT(18) \ + DECLARE_INTERRUPT(19) \ + DECLARE_INTERRUPT(20) \ + DECLARE_INTERRUPT(21) \ + DECLARE_INTERRUPT(22) \ + DECLARE_INTERRUPT(23) \ + DECLARE_INTERRUPT(24) \ + DECLARE_INTERRUPT(25) \ + DECLARE_INTERRUPT(26) \ + DECLARE_INTERRUPT(27) \ + DECLARE_INTERRUPT(28) \ + DECLARE_INTERRUPT(29) \ + DECLARE_INTERRUPT(30) \ + DECLARE_INTERRUPT(31) \ + DECLARE_INTERRUPT(32) \ + DECLARE_INTERRUPT(33) \ + DECLARE_INTERRUPT(34) \ + DECLARE_INTERRUPT(35) \ + DECLARE_INTERRUPT(36) \ + DECLARE_INTERRUPT(37) \ + DECLARE_INTERRUPT(38) \ + DECLARE_INTERRUPT(39) \ + DECLARE_INTERRUPT(40) \ + DECLARE_INTERRUPT(41) \ + DECLARE_INTERRUPT(42) \ + DECLARE_INTERRUPT(43) \ + DECLARE_INTERRUPT(44) \ + DECLARE_INTERRUPT(45) \ + DECLARE_INTERRUPT(46) \ + DECLARE_INTERRUPT(47) \ + DECLARE_INTERRUPT(48) \ + DECLARE_INTERRUPT(49) \ + DECLARE_INTERRUPT(50) \ + DECLARE_INTERRUPT(51) \ + DECLARE_INTERRUPT(52) \ + DECLARE_INTERRUPT(53) \ + DECLARE_INTERRUPT(54) \ + DECLARE_INTERRUPT(55) \ + DECLARE_INTERRUPT(56) \ + DECLARE_INTERRUPT(57) \ + DECLARE_INTERRUPT(58) \ + DECLARE_INTERRUPT(59) \ + DECLARE_INTERRUPT(60) \ + DECLARE_INTERRUPT(61) \ + DECLARE_INTERRUPT(62) \ + DECLARE_INTERRUPT(63) \ + DECLARE_INTERRUPT(64) \ + DECLARE_INTERRUPT(65) \ + DECLARE_INTERRUPT(66) \ + DECLARE_INTERRUPT(67) \ + DECLARE_INTERRUPT(68) \ + DECLARE_INTERRUPT(69) \ + DECLARE_INTERRUPT(70) \ + DECLARE_INTERRUPT(71) \ + DECLARE_INTERRUPT(72) \ + DECLARE_INTERRUPT(73) \ + DECLARE_INTERRUPT(74) \ + DECLARE_INTERRUPT(75) \ + DECLARE_INTERRUPT(76) \ + DECLARE_INTERRUPT(77) \ + DECLARE_INTERRUPT(78) \ + DECLARE_INTERRUPT(79) \ + DECLARE_INTERRUPT(80) \ + DECLARE_INTERRUPT(81) \ + DECLARE_INTERRUPT(82) \ + DECLARE_INTERRUPT(83) \ + DECLARE_INTERRUPT(84) \ + DECLARE_INTERRUPT(85) \ + DECLARE_INTERRUPT(86) \ + DECLARE_INTERRUPT(87) \ + DECLARE_INTERRUPT(88) \ + DECLARE_INTERRUPT(89) \ + DECLARE_INTERRUPT(90) \ + DECLARE_INTERRUPT(91) \ + DECLARE_INTERRUPT(92) \ + DECLARE_INTERRUPT(93) \ + DECLARE_INTERRUPT(94) \ + DECLARE_INTERRUPT(95) \ + DECLARE_INTERRUPT(97) \ + DECLARE_INTERRUPT(96) \ + DECLARE_INTERRUPT(98) \ + DECLARE_INTERRUPT(99) \ + DECLARE_INTERRUPT(100) \ + DECLARE_INTERRUPT(101) \ + DECLARE_INTERRUPT(102) \ + DECLARE_INTERRUPT(103) \ + DECLARE_INTERRUPT(104) \ + DECLARE_INTERRUPT(105) \ + DECLARE_INTERRUPT(106) \ + DECLARE_INTERRUPT(107) \ + DECLARE_INTERRUPT(108) \ + DECLARE_INTERRUPT(109) \ + DECLARE_INTERRUPT(110) \ + DECLARE_INTERRUPT(111) \ + DECLARE_INTERRUPT(112) \ + DECLARE_INTERRUPT(113) \ + DECLARE_INTERRUPT(114) \ + DECLARE_INTERRUPT(115) \ + DECLARE_INTERRUPT(116) \ + DECLARE_INTERRUPT(117) \ + DECLARE_INTERRUPT(118) \ + DECLARE_INTERRUPT(119) \ + DECLARE_INTERRUPT(120) \ + DECLARE_INTERRUPT(121) \ + DECLARE_INTERRUPT(122) \ + DECLARE_INTERRUPT(123) \ + DECLARE_INTERRUPT(124) \ + DECLARE_INTERRUPT(125) \ + DECLARE_INTERRUPT(126) \ + DECLARE_INTERRUPT(127) \ + DECLARE_INTERRUPT(128) \ + DECLARE_INTERRUPT(129) \ + DECLARE_INTERRUPT(130) \ + DECLARE_INTERRUPT(131) \ + DECLARE_INTERRUPT(132) \ + DECLARE_INTERRUPT(133) \ + DECLARE_INTERRUPT(134) \ + DECLARE_INTERRUPT(135) \ + DECLARE_INTERRUPT(136) \ + DECLARE_INTERRUPT(137) \ + DECLARE_INTERRUPT(138) \ + DECLARE_INTERRUPT(139) \ + DECLARE_INTERRUPT(140) \ + DECLARE_INTERRUPT(141) \ + DECLARE_INTERRUPT(142) \ + DECLARE_INTERRUPT(143) \ + DECLARE_INTERRUPT(144) \ + DECLARE_INTERRUPT(145) \ + DECLARE_INTERRUPT(146) \ + DECLARE_INTERRUPT(147) \ + DECLARE_INTERRUPT(148) \ + DECLARE_INTERRUPT(149) \ + DECLARE_INTERRUPT(150) \ + DECLARE_INTERRUPT(151) \ + DECLARE_INTERRUPT(152) \ + DECLARE_INTERRUPT(153) \ + DECLARE_INTERRUPT(154) \ + DECLARE_INTERRUPT(155) \ + DECLARE_INTERRUPT(156) \ + DECLARE_INTERRUPT(157) \ + DECLARE_INTERRUPT(158) \ + DECLARE_INTERRUPT(159) \ + DECLARE_INTERRUPT(160) \ + DECLARE_INTERRUPT(161) \ + DECLARE_INTERRUPT(162) \ + DECLARE_INTERRUPT(163) \ + DECLARE_INTERRUPT(164) \ + DECLARE_INTERRUPT(165) \ + DECLARE_INTERRUPT(166) \ + DECLARE_INTERRUPT(167) \ + DECLARE_INTERRUPT(168) \ + DECLARE_INTERRUPT(169) \ + DECLARE_INTERRUPT(170) \ + DECLARE_INTERRUPT(171) \ + DECLARE_INTERRUPT(172) \ + DECLARE_INTERRUPT(173) \ + DECLARE_INTERRUPT(174) \ + DECLARE_INTERRUPT(175) \ + DECLARE_INTERRUPT(176) \ + DECLARE_INTERRUPT(177) \ + DECLARE_INTERRUPT(178) \ + DECLARE_INTERRUPT(179) \ + DECLARE_INTERRUPT(180) \ + DECLARE_INTERRUPT(181) \ + DECLARE_INTERRUPT(182) \ + DECLARE_INTERRUPT(183) \ + DECLARE_INTERRUPT(184) \ + DECLARE_INTERRUPT(185) \ + DECLARE_INTERRUPT(186) \ + DECLARE_INTERRUPT(187) \ + DECLARE_INTERRUPT(188) \ + DECLARE_INTERRUPT(189) \ + DECLARE_INTERRUPT(190) \ + DECLARE_INTERRUPT(191) \ + DECLARE_INTERRUPT(192) \ + DECLARE_INTERRUPT(193) \ + DECLARE_INTERRUPT(194) \ + DECLARE_INTERRUPT(195) \ + DECLARE_INTERRUPT(196) \ + DECLARE_INTERRUPT(197) \ + DECLARE_INTERRUPT(198) \ + DECLARE_INTERRUPT(199) \ + DECLARE_INTERRUPT(200) \ + DECLARE_INTERRUPT(201) \ + DECLARE_INTERRUPT(202) \ + DECLARE_INTERRUPT(203) \ + DECLARE_INTERRUPT(204) \ + DECLARE_INTERRUPT(205) \ + DECLARE_INTERRUPT(206) \ + DECLARE_INTERRUPT(207) \ + DECLARE_INTERRUPT(208) \ + DECLARE_INTERRUPT(209) \ + DECLARE_INTERRUPT(210) \ + DECLARE_INTERRUPT(211) \ + DECLARE_INTERRUPT(212) \ + DECLARE_INTERRUPT(213) \ + DECLARE_INTERRUPT(214) \ + DECLARE_INTERRUPT(215) \ + DECLARE_INTERRUPT(216) \ + DECLARE_INTERRUPT(217) \ + DECLARE_INTERRUPT(218) \ + DECLARE_INTERRUPT(219) \ + DECLARE_INTERRUPT(220) \ + DECLARE_INTERRUPT(221) \ + DECLARE_INTERRUPT(222) \ + DECLARE_INTERRUPT(223) \ + DECLARE_INTERRUPT(224) \ + DECLARE_INTERRUPT(225) \ + DECLARE_INTERRUPT(226) \ + DECLARE_INTERRUPT(227) \ + DECLARE_INTERRUPT(228) \ + DECLARE_INTERRUPT(229) \ + DECLARE_INTERRUPT(230) \ + DECLARE_INTERRUPT(231) \ + DECLARE_INTERRUPT(232) \ + DECLARE_INTERRUPT(233) \ + DECLARE_INTERRUPT(234) \ + DECLARE_INTERRUPT(235) \ + DECLARE_INTERRUPT(236) \ + DECLARE_INTERRUPT(237) \ + DECLARE_INTERRUPT(238) \ + DECLARE_INTERRUPT(239) \ + DECLARE_INTERRUPT(240) \ + DECLARE_INTERRUPT(241) \ + DECLARE_INTERRUPT(242) \ + DECLARE_INTERRUPT(243) \ + DECLARE_INTERRUPT(244) \ + DECLARE_INTERRUPT(245) \ + DECLARE_INTERRUPT(246) \ + DECLARE_INTERRUPT(247) \ + DECLARE_INTERRUPT(248) \ + DECLARE_INTERRUPT(249) \ + DECLARE_INTERRUPT(250) \ + DECLARE_INTERRUPT(251) \ + DECLARE_INTERRUPT(252) \ + DECLARE_INTERRUPT(253) \ + DECLARE_INTERRUPT(254) \ + DECLARE_INTERRUPT(255)); diff --git a/cpu/i386/sc520/sc520_timer.c b/cpu/i386/sc520/sc520_timer.c index 23de14b..93b5b55 100644 --- a/cpu/i386/sc520/sc520_timer.c +++ b/cpu/i386/sc520/sc520_timer.c @@ -35,6 +35,12 @@ void sc520_timer_isr(void) int timer_init(void) { + /* Register the SC520 specific timer interrupt handler */ + register_timer_isr (sc520_timer_isr); + + /* Install interrupt handler for GP Timer 1 */ + irq_install_handler (0, timer_isr, NULL); + /* Map GP Timer 1 to Master PIC IR0 */ sc520_mmcr->gp_tmr_int_map[1] = 0x01; @@ -54,11 +60,6 @@ int timer_init(void) sc520_mmcr->gptmr1maxcmpa = 100; sc520_mmcr->gptmr1ctl = 0xe009; - /* Register the SC520 specific timer interrupt handler */ - register_timer_isr (sc520_timer_isr); - - /* Install interrupt handler for GP Timer 1 */ - irq_install_handler (0, timer_isr, NULL); unmask_irq (0); /* Clear the GP Timer 1 status register to get the show rolling*/ @@ -67,7 +68,7 @@ int timer_init(void) return 0; } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { int m = 0; long u; diff --git a/cpu/i386/start.S b/cpu/i386/start.S index 59089ef..25d32e6 100644 --- a/cpu/i386/start.S +++ b/cpu/i386/start.S @@ -63,11 +63,8 @@ early_board_init_ret: jmp mem_init mem_init_ret: - /* check ammount of configured memory - * (we need atleast bss start+bss size+stack size) */ - movl $_i386boot_bss_start, %ecx /* BSS start */ - addl $_i386boot_bss_size, %ecx /* BSS size */ - addl $CONFIG_SYS_STACK_SIZE, %ecx + /* Check we have enough memory for stack */ + movl $CONFIG_SYS_STACK_SIZE, %ecx cmpl %ecx, %eax jae mem_ok @@ -78,6 +75,8 @@ mem_init_ret: .progress0a: jmp die mem_ok: + /* Set stack pointer to upper memory limit*/ + movl %eax, %esp /* indicate progress */ movw $0x02, %ax @@ -85,12 +84,7 @@ mem_ok: jmp show_boot_progress_asm .progress1: - /* create a stack after the bss */ - movl $_i386boot_bss_start, %eax - addl $_i386boot_bss_size, %eax - addl $CONFIG_SYS_STACK_SIZE, %eax - movl %eax, %esp - + /* Test the stack */ pushl $0 popl %eax cmpl $0, %eax @@ -116,115 +110,19 @@ stack_ok: jmp show_boot_progress_asm .progress2: - /* copy data section to ram, size must be 4-byte aligned */ - movl $_i386boot_romdata_dest, %edi /* destination address */ - movl $_i386boot_romdata_start, %esi /* source address */ - movl $_i386boot_romdata_size, %ecx /* number of bytes to copy */ - movl %ecx, %eax - andl $3, %eax - jnz data_fail - - shrl $2, %ecx /* copy 4 byte each time */ - cld - cmpl $0, %ecx - je data_ok -data_segment: - movsl - loop data_segment - jmp data_ok -data_fail: - /* indicate (lack of) progress */ - movw $0x83, %ax - movl $.progress2a, %ebp - jmp show_boot_progress_asm -.progress2a: - jmp die - -data_ok: - - /* indicate progress */ - movw $0x04, %ax - movl $.progress3, %ebp - jmp show_boot_progress_asm -.progress3: - - /* clear bss section in ram, size must be 4-byte aligned */ - movl $_i386boot_bss_start, %edi /* MK_CHG BSS start */ - movl $_i386boot_bss_size, %ecx /* BSS size */ - movl %ecx, %eax - andl $3, %eax - jnz bss_fail - shrl $2, %ecx /* clear 4 byte each time */ - cld - cmpl $0, %ecx - je bss_ok -bss: - movl $0, (%edi) - add $4, %edi - loop bss - jmp bss_ok - -bss_fail: - /* indicate (lack of) progress */ - movw $0x84, %ax - movl $.progress3a, %ebp - jmp show_boot_progress_asm -.progress3a: - jmp die - -bss_ok: -#ifndef CONFIG_SKIP_RELOCATE_UBOOT - /* indicate progress */ - movw $0x06, %ax - movl $.progress6, %ebp - jmp show_boot_progress_asm -.progress6: - - /* copy text section to ram, size must be 4-byte aligned */ - movl $CONFIG_SYS_BL_START_RAM, %edi /* destination address */ - movl $TEXT_BASE, %esi /* source address */ - movl $_i386boot_text_size, %ecx /* number of bytes to copy */ - movl %ecx, %eax - andl $3, %eax - jz text_copy /* Already 4-byte aligned */ - subl $4, %eax /* Add extra bytes to size */ - addl %eax, %ecx -text_copy: - shrl $2, %ecx /* copy 4 byte each time */ - cld - cmpl $0, %ecx - je text_ok -text_segment: - movsl - loop text_segment - jmp text_ok -text_fail: - /* indicate (lack of) progress */ - movw $0x86, %ax - movl $.progress5a, %ebp - jmp show_boot_progress_asm -.progress5a: - jmp die - -text_ok: -#endif wbinvd + /* Get upper memory limit */ + movl %esp, %ecx + subl $CONFIG_SYS_STACK_SIZE, %ecx - /* indicate progress */ - movw $0x05, %ax - movl $.progress4, %ebp - jmp show_boot_progress_asm -.progress4: - -#ifndef CONFIG_SKIP_RELOCATE_UBOOT - /* Jump to the RAM copy of start_i386boot */ - movl $start_i386boot, %ebp - addl $(CONFIG_SYS_BL_START_RAM - TEXT_BASE), %ebp - call *%ebp /* Enter, U-boot! */ -#else - call start_i386boot /* Enter, U-boot! */ -#endif + /* Create a Stack Frame */ + pushl %ebp + movl %esp, %ebp + + /* stack_limit parameter */ + pushl %ecx + call board_init_f /* Enter, U-boot! */ /* indicate (lack of) progress */ movw $0x85, %ax diff --git a/cpu/ixp/start.S b/cpu/ixp/start.S index 196ba5d..5ebce53 100644 --- a/cpu/ixp/start.S +++ b/cpu/ixp/start.S @@ -505,8 +505,8 @@ reset_endless: /* * 0 <= r0 <= 2000 */ -.globl udelay -udelay: +.globl __udelay +__udelay: mov r2, #0x6800 orr r2, r2, #0x00db mul r0, r2, r0 diff --git a/cpu/ixp/timer.c b/cpu/ixp/timer.c index 6856149..edf341f 100644 --- a/cpu/ixp/timer.c +++ b/cpu/ixp/timer.c @@ -99,7 +99,7 @@ void ixp425_udelay(unsigned long usec) while (!(*IXP425_OSST & IXP425_OSST_TIMER_1_PEND)); } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { while (usec--) ixp425_udelay(1); } diff --git a/cpu/lh7a40x/timer.c b/cpu/lh7a40x/timer.c index f9b5be0..2691315 100644 --- a/cpu/lh7a40x/timer.c +++ b/cpu/lh7a40x/timer.c @@ -90,7 +90,7 @@ void set_timer (ulong t) timestamp = t; } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo,tmp; diff --git a/cpu/mcf547x_8x/slicetimer.c b/cpu/mcf547x_8x/slicetimer.c index 67e8189..8dc010a 100644 --- a/cpu/mcf547x_8x/slicetimer.c +++ b/cpu/mcf547x_8x/slicetimer.c @@ -40,7 +40,7 @@ static ulong timestamp; #endif extern void dtimer_intr_setup(void); -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { volatile slt_t *timerp = (slt_t *) (CONFIG_SYS_UDELAY_BASE); u32 now, freq; diff --git a/cpu/mpc512x/cpu.c b/cpu/mpc512x/cpu.c index 42ccd81..dac48db 100644 --- a/cpu/mpc512x/cpu.c +++ b/cpu/mpc512x/cpu.c @@ -197,6 +197,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CONFIG_HAS_ETH0 fdt_fixup_ethernet(blob); #endif + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c index efa64c7..2a28df4 100644 --- a/cpu/mpc5xxx/cpu.c +++ b/cpu/mpc5xxx/cpu.c @@ -157,6 +157,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) } #endif + fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); } #endif diff --git a/cpu/mpc85xx/mp.c b/cpu/mpc85xx/mp.c index 00b6450..7626eb8 100644 --- a/cpu/mpc85xx/mp.c +++ b/cpu/mpc85xx/mp.c @@ -90,11 +90,7 @@ int cpu_release(int nr, int argc, char *argv[]) return 1; } -#ifdef CONFIG_SYS_64BIT_STRTOUL boot_addr = simple_strtoull(argv[0], NULL, 16); -#else - boot_addr = simple_strtoul(argv[0], NULL, 16); -#endif /* handle pir, r3, r6 */ for (i = 1; i < 4; i++) { diff --git a/cpu/mpc85xx/u-boot-nand.lds b/cpu/mpc85xx/u-boot-nand.lds index a0fc8f1..b4c63e2 100644 --- a/cpu/mpc85xx/u-boot-nand.lds +++ b/cpu/mpc85xx/u-boot-nand.lds @@ -58,7 +58,6 @@ SECTIONS .text : { *(.text) - *(.fixup) *(.got1) } :text _etext = .; diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c index fa521f0..eed4534 100644 --- a/cpu/ppc4xx/4xx_pci.c +++ b/cpu/ppc4xx/4xx_pci.c @@ -73,23 +73,30 @@ #include <common.h> #include <command.h> -#if !defined(CONFIG_440) #include <asm/4xx_pci.h> -#endif #include <asm/processor.h> +#include <asm/io.h> #include <pci.h> #ifdef CONFIG_PCI DECLARE_GLOBAL_DATA_PTR; +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) + +#if defined(CONFIG_PMC405) +ushort pmc405_pci_subsys_deviceid(void); +#endif + +/*#define DEBUG*/ + /* * Board-specific pci initialization * Platform code can reimplement pci_pre_init() if needed */ int __pci_pre_init(struct pci_controller *hose) { -#if defined (CONFIG_405EP) +#if defined(CONFIG_405EP) /* * Enable the internal PCI arbiter by default. * @@ -105,15 +112,8 @@ int __pci_pre_init(struct pci_controller *hose) return 1; } -int pci_pre_init(struct pci_controller *hose) __attribute__((weak, alias("__pci_pre_init"))); - -#if defined(CONFIG_405GP) || defined(CONFIG_405EP) - -#if defined(CONFIG_PMC405) -ushort pmc405_pci_subsys_deviceid(void); -#endif - -/*#define DEBUG*/ +int pci_pre_init(struct pci_controller *hose) + __attribute__((weak, alias("__pci_pre_init"))); int __is_pci_host(struct pci_controller *hose) { @@ -231,7 +231,7 @@ void pci_405gp_init(struct pci_controller *hose) pciauto_region_init(hose->pci_fb); /* Let board change/modify hose & do initial checks */ - if (pci_pre_init (hose) == 0) { + if (pci_pre_init(hose) == 0) { printf("PCI: Board-specific initialization failed.\n"); printf("PCI: Configuration aborted.\n"); return; @@ -478,6 +478,231 @@ void pci_init_board(void) static struct pci_controller ppc440_hose = {0}; +/* + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * Weak default implementation: "Normal" boards implement the PCI + * host functionality. This can be overridden for PCI adapter boards. + */ +int __is_pci_host(struct pci_controller *hose) +{ + return 1; +} +int is_pci_host(struct pci_controller *hose) + __attribute__((weak, alias("__is_pci_host"))); + +#if defined(CONFIG_440EP) || defined(CONFIG_440EPX) || \ + defined(CONFIG_440GR) || defined(CONFIG_440GRX) + +#if defined(CONFIG_SYS_PCI_TARGET_INIT) +/* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + */ +void __pci_target_init(struct pci_controller *hose) +{ + /* + * Set up Direct MMIO registers + */ + + /* + * PowerPC440 EP PCI Master configuration. + * Map one 1Gig range of PLB/processor addresses to PCI memory space. + * PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF + * Use byte reversed out routines to handle endianess. + * Make this region non-prefetchable. + */ + /* PMM0 Mask/Attribute - disabled b4 setting */ + out_le32((void *)PCIL0_PMM0MA, 0x00000000); + /* PMM0 Local Address */ + out_le32((void *)PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); + /* PMM0 PCI Low Address */ + out_le32((void *)PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); + /* PMM0 PCI High Address */ + out_le32((void *)PCIL0_PMM0PCIHA, 0x00000000); + /* 512M + No prefetching, and enable region */ + out_le32((void *)PCIL0_PMM0MA, 0xE0000001); + + /* PMM1 Mask/Attribute - disabled b4 setting */ + out_le32((void *)PCIL0_PMM1MA, 0x00000000); + /* PMM1 Local Address */ + out_le32((void *)PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); + /* PMM1 PCI Low Address */ + out_le32((void *)PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); + /* PMM1 PCI High Address */ + out_le32((void *)PCIL0_PMM1PCIHA, 0x00000000); + /* 512M + No prefetching, and enable region */ + out_le32((void *)PCIL0_PMM1MA, 0xE0000001); + + out_le32((void *)PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out_le32((void *)PCIL0_PTM1LA, 0); /* Local Addr. Reg */ + out_le32((void *)PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ + out_le32((void *)PCIL0_PTM2LA, 0); /* Local Addr. Reg */ + + /* + * Set up Configuration registers + */ + + /* Program the board's subsystem id/vendor id */ + pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, + CONFIG_SYS_PCI_SUBSYS_VENDORID); + pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); + + /* Configure command register as bus master */ + pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); + + /* 240nS PCI clock */ + pci_write_config_word(0, PCI_LATENCY_TIMER, 1); + + /* No error reporting */ + pci_write_config_word(0, PCI_ERREN, 0); + + pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101); +} +#endif /* CONFIG_SYS_PCI_TARGET_INIT */ + +/* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + */ +int __pci_pre_init(struct pci_controller *hose) +{ + u32 reg; + + /* + * Set priority for all PLB3 devices to 0. + * Set PLB3 arbiter to fair mode. + */ + mfsdr(SD0_AMP1, reg); + mtsdr(SD0_AMP1, (reg & 0x000000FF) | 0x0000FF00); + reg = mfdcr(PLB3_ACR); + mtdcr(PLB3_ACR, reg | 0x80000000); + + /* + * Set priority for all PLB4 devices to 0. + */ + mfsdr(SD0_AMP0, reg); + mtsdr(SD0_AMP0, (reg & 0x000000FF) | 0x0000FF00); + reg = mfdcr(PLB4_ACR) | 0xa0000000; + mtdcr(PLB4_ACR, reg); + + /* + * Set Nebula PLB4 arbiter to fair mode. + */ + /* Segment0 */ + reg = (mfdcr(PLB0_ACR) & ~PLB0_ACR_PPM_MASK) | PLB0_ACR_PPM_FAIR; + reg = (reg & ~PLB0_ACR_HBU_MASK) | PLB0_ACR_HBU_ENABLED; + reg = (reg & ~PLB0_ACR_RDP_MASK) | PLB0_ACR_RDP_4DEEP; + reg = (reg & ~PLB0_ACR_WRP_MASK) | PLB0_ACR_WRP_2DEEP; + mtdcr(PLB0_ACR, reg); + + /* Segment1 */ + reg = (mfdcr(PLB1_ACR) & ~PLB1_ACR_PPM_MASK) | PLB1_ACR_PPM_FAIR; + reg = (reg & ~PLB1_ACR_HBU_MASK) | PLB1_ACR_HBU_ENABLED; + reg = (reg & ~PLB1_ACR_RDP_MASK) | PLB1_ACR_RDP_4DEEP; + reg = (reg & ~PLB1_ACR_WRP_MASK) | PLB1_ACR_WRP_2DEEP; + mtdcr(PLB1_ACR, reg); + +#if defined(CONFIG_SYS_PCI_BOARD_FIXUP_IRQ) + hose->fixup_irq = board_pci_fixup_irq; +#endif + + return 1; +} + +#else /* defined(CONFIG_440EP) ... */ + +#if defined(CONFIG_SYS_PCI_TARGET_INIT) +void __pci_target_init(struct pci_controller * hose) +{ + /* + * Disable everything + */ + out_le32((void *)PCIL0_PIM0SA, 0); /* disable */ + out_le32((void *)PCIL0_PIM1SA, 0); /* disable */ + out_le32((void *)PCIL0_PIM2SA, 0); /* disable */ + out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */ + + /* + * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 + * strapping options do not support sizes such as 128/256 MB. + */ + out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); + out_le32((void *)PCIL0_PIM0LAH, 0); + out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); + out_le32((void *)PCIL0_BAR0, 0); + + /* + * Program the board's subsystem id/vendor id + */ + out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); + out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); + + out_le16((void *)PCIL0_CMD, in_le16((void *)PCIL0_CMD) | + PCI_COMMAND_MEMORY); +} +#endif /* CONFIG_SYS_PCI_TARGET_INIT */ + +int __pci_pre_init(struct pci_controller *hose) +{ + /* + * This board is always configured as the host & requires the + * PCI arbiter to be enabled. + */ + if (!pci_arbiter_enabled()) { + printf("PCI: PCI Arbiter disabled!\n"); + return 0; + } + + return 1; +} + +#endif /* defined(CONFIG_440EP) ... */ + +#if defined(CONFIG_SYS_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller * hose) + __attribute__((weak, alias("__pci_target_init"))); +#endif /* CONFIG_SYS_PCI_TARGET_INIT */ + +int pci_pre_init(struct pci_controller *hose) + __attribute__((weak, alias("__pci_pre_init"))); + +#if defined(CONFIG_SYS_PCI_MASTER_INIT) +void __pci_master_init(struct pci_controller *hose) +{ + u16 reg; + + /* + * Write the PowerPC440 EP PCI Configuration regs. + * Enable PowerPC440 EP to be a master on the PCI bus (PMM). + * Enable PowerPC440 EP to act as a PCI memory target (PTM). + */ + pci_read_config_word(0, PCI_COMMAND, ®); + pci_write_config_word(0, PCI_COMMAND, reg | + PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY); +} +void pci_master_init(struct pci_controller *hose) + __attribute__((weak, alias("__pci_master_init"))); +#endif /* CONFIG_SYS_PCI_MASTER_INIT */ int pci_440_init (struct pci_controller *hose) { @@ -548,7 +773,7 @@ int pci_440_init (struct pci_controller *hose) pci_setup_indirect(hose, PCIL0_CFGADR, PCIL0_CFGDATA); /* Let board change/modify hose & do initial checks */ - if (pci_pre_init (hose) == 0) { + if (pci_pre_init(hose) == 0) { printf("PCI: Board-specific initialization failed.\n"); printf("PCI: Configuration aborted.\n"); return -1; diff --git a/cpu/ppc4xx/4xx_pcie.c b/cpu/ppc4xx/4xx_pcie.c index 19d2c7d..d9605c3 100644 --- a/cpu/ppc4xx/4xx_pcie.c +++ b/cpu/ppc4xx/4xx_pcie.c @@ -48,6 +48,125 @@ enum { LNKW_X8 = 0x8 }; +static struct pci_controller pcie_hose[CONFIG_SYS_PCIE_NR_PORTS]; + +/* + * Per default, all cards are present, so we need to check if the + * link comes up. + */ +int __board_pcie_card_present(int port) +{ + return 1; +} +int board_pcie_card_present(int port) + __attribute__((weak, alias("__board_pcie_card_present"))); + +/* + * Some boards have runtime detection of the first and last PCIe + * slot used, so let's provide weak default functions for the + * common version. + */ +int __board_pcie_first(void) +{ + return 0; +} +int board_pcie_first(void) + __attribute__((weak, alias("__board_pcie_first"))); + +int __board_pcie_last(void) +{ + return CONFIG_SYS_PCIE_NR_PORTS - 1; +} +int board_pcie_last(void) + __attribute__((weak, alias("__board_pcie_last"))); + +void __board_pcie_setup_port(int port, int rootpoint) +{ + /* noting in this weak default implementation */ +} +void board_pcie_setup_port(int port, int rootpoint) + __attribute__((weak, alias("__board_pcie_setup_port"))); + +void pcie_setup_hoses(int busno) +{ + struct pci_controller *hose; + int i, bus; + int ret = 0; + char *env; + unsigned int delay; + int first = board_pcie_first(); + int last = board_pcie_last(); + + /* + * Assume we're called after the PCI(X) hose(s) are initialized, + * which takes bus ID 0... and therefore start numbering PCIe's + * from the next number. + */ + bus = busno; + + for (i = first; i <= last; i++) { + /* + * Some boards (e.g. Katmai) can detects via hardware + * if a PCIe card is plugged, so let's check this. + */ + if (!board_pcie_card_present(i)) + continue; + + if (is_end_point(i)) { + board_pcie_setup_port(i, 0); + ret = ppc4xx_init_pcie_endport(i); + } else { + board_pcie_setup_port(i, 1); + ret = ppc4xx_init_pcie_rootport(i); + } + if (ret == -ENODEV) + continue; + if (ret) { + printf("PCIE%d: initialization as %s failed\n", i, + is_end_point(i) ? "endpoint" : "root-complex"); + continue; + } + + hose = &pcie_hose[i]; + hose->first_busno = bus; + hose->last_busno = bus; + hose->current_busno = bus; + + /* setup mem resource */ + pci_set_region(hose->regions + 0, + CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, + CONFIG_SYS_PCIE_MEMBASE + i * CONFIG_SYS_PCIE_MEMSIZE, + CONFIG_SYS_PCIE_MEMSIZE, + PCI_REGION_MEM); + hose->region_count = 1; + pci_register_hose(hose); + + if (is_end_point(i)) { + ppc4xx_setup_pcie_endpoint(hose, i); + /* + * Reson for no scanning is endpoint can not generate + * upstream configuration accesses. + */ + } else { + ppc4xx_setup_pcie_rootpoint(hose, i); + env = getenv ("pciscandelay"); + if (env != NULL) { + delay = simple_strtoul(env, NULL, 10); + if (delay > 5) + printf("Warning, expect noticable delay before " + "PCIe scan due to 'pciscandelay' value!\n"); + mdelay(delay * 1000); + } + + /* + * Config access can only go down stream + */ + hose->last_busno = pci_hose_scan(hose); + bus = hose->last_busno + 1; + } + } +} + static int validate_endpoint(struct pci_controller *hose) { if (hose->cfg_data == (u8 *)CONFIG_SYS_PCIE0_CFGBASE) diff --git a/cpu/ppc4xx/cmd_chip_config.c b/cpu/ppc4xx/cmd_chip_config.c index d360d5b..ba57211 100644 --- a/cpu/ppc4xx/cmd_chip_config.c +++ b/cpu/ppc4xx/cmd_chip_config.c @@ -52,6 +52,12 @@ static int do_chip_config(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) int cur_config_nr = -1; u8 cur_config[CONFIG_4xx_CONFIG_BLOCKSIZE]; + /* + * First switch to correct I2C bus. This is I2C bus 0 + * for all currently available 4xx derivats. + */ + I2C_SET_BUS(0); + #ifdef CONFIG_CMD_EEPROM ret = eeprom_read(CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR, CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET, diff --git a/cpu/ppc4xx/config.mk b/cpu/ppc4xx/config.mk index 00ad39b..979004b 100644 --- a/cpu/ppc4xx/config.mk +++ b/cpu/ppc4xx/config.mk @@ -32,3 +32,6 @@ PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440 else PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405 endif + +# Use default linker script. Board port can override in board/*/config.mk +LDSCRIPT := $(SRCTREE)/cpu/ppc4xx/u-boot.lds diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index e1b00a7..73d4d06 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -81,7 +81,7 @@ static int pci_async_enabled(void) #if defined(CONFIG_PCI) && !defined(CONFIG_IOP480) && \ !defined(CONFIG_405) && !defined(CONFIG_405EX) -static int pci_arbiter_enabled(void) +int pci_arbiter_enabled(void) { #if defined(CONFIG_405GP) return (mfdcr(CPC0_PSR) & PSR_PCI_ARBIT_EN); diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c index e3e1bab..7976e75 100644 --- a/cpu/ppc4xx/i2c.c +++ b/cpu/ppc4xx/i2c.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2009 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * based on work by Anne Sophie Harnois <anne-sophie.harnois@nextream.fr> @@ -37,7 +37,8 @@ DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_I2C_MULTI_BUS) -/* Initialize the bus pointer to whatever one the SPD EEPROM is on. +/* + * Initialize the bus pointer to whatever one the SPD EEPROM is on. * Default is bus 0. This is necessary because the DDR initialization * runs from ROM, and we can't switch buses because we can't modify * the global variables. @@ -45,59 +46,63 @@ DECLARE_GLOBAL_DATA_PTR; #ifndef CONFIG_SYS_SPD_BUS_NUM #define CONFIG_SYS_SPD_BUS_NUM 0 #endif -static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = CONFIG_SYS_SPD_BUS_NUM; +static unsigned int i2c_bus_num __attribute__ ((section (".data"))) = + CONFIG_SYS_SPD_BUS_NUM; #endif /* CONFIG_I2C_MULTI_BUS */ static void _i2c_bus_reset(void) { + struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR; int i; u8 dc; /* Reset status register */ /* write 1 in SCMP and IRQA to clear these fields */ - out_8((u8 *)IIC_STS, 0x0A); + out_8(&i2c->sts, 0x0A); /* write 1 in IRQP IRQD LA ICT XFRA to clear these fields */ - out_8((u8 *)IIC_EXTSTS, 0x8F); + out_8(&i2c->extsts, 0x8F); /* Place chip in the reset state */ - out_8((u8 *)IIC_XTCNTLSS, IIC_XTCNTLSS_SRST); + out_8(&i2c->xtcntlss, IIC_XTCNTLSS_SRST); /* Check if bus is free */ - dc = in_8((u8 *)IIC_DIRECTCNTL); + dc = in_8(&i2c->directcntl); if (!DIRCTNL_FREE(dc)){ /* Try to set bus free state */ - out_8((u8 *)IIC_DIRECTCNTL, IIC_DIRCNTL_SDAC | IIC_DIRCNTL_SCC); + out_8(&i2c->directcntl, IIC_DIRCNTL_SDAC | IIC_DIRCNTL_SCC); /* Wait until we regain bus control */ for (i = 0; i < 100; ++i) { - dc = in_8((u8 *)IIC_DIRECTCNTL); + dc = in_8(&i2c->directcntl); if (DIRCTNL_FREE(dc)) break; /* Toggle SCL line */ dc ^= IIC_DIRCNTL_SCC; - out_8((u8 *)IIC_DIRECTCNTL, dc); + out_8(&i2c->directcntl, dc); udelay(10); dc ^= IIC_DIRCNTL_SCC; - out_8((u8 *)IIC_DIRECTCNTL, dc); + out_8(&i2c->directcntl, dc); } } /* Remove reset */ - out_8((u8 *)IIC_XTCNTLSS, 0); + out_8(&i2c->xtcntlss, 0); } -void i2c_init(int speed, int slaveadd) +void i2c_init(int speed, int slaveaddr) { - unsigned long freqOPB; + struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR; int val, divisor; int bus; #ifdef CONFIG_SYS_I2C_INIT_BOARD - /* call board specific i2c bus reset routine before accessing the */ - /* environment, which might be in a chip on that bus. For details */ - /* about this problem see doc/I2C_Edge_Conditions. */ + /* + * Call board specific i2c bus reset routine before accessing the + * environment, which might be in a chip on that bus. For details + * about this problem see doc/I2C_Edge_Conditions. + */ i2c_init_board(); #endif @@ -109,54 +114,52 @@ void i2c_init(int speed, int slaveadd) _i2c_bus_reset(); /* clear lo master address */ - out_8((u8 *)IIC_LMADR, 0); + out_8(&i2c->lmadr, 0); /* clear hi master address */ - out_8((u8 *)IIC_HMADR, 0); + out_8(&i2c->hmadr, 0); /* clear lo slave address */ - out_8((u8 *)IIC_LSADR, 0); + out_8(&i2c->lsadr, 0); /* clear hi slave address */ - out_8((u8 *)IIC_HSADR, 0); + out_8(&i2c->hsadr, 0); /* Clock divide Register */ - /* get OPB frequency */ - freqOPB = get_OPB_freq(); - /* set divisor according to freqOPB */ - divisor = (freqOPB - 1) / 10000000; + /* set divisor according to freq_opb */ + divisor = (get_OPB_freq() - 1) / 10000000; if (divisor == 0) divisor = 1; - out_8((u8 *)IIC_CLKDIV, divisor); + out_8(&i2c->clkdiv, divisor); /* no interrupts */ - out_8((u8 *)IIC_INTRMSK, 0); + out_8(&i2c->intrmsk, 0); /* clear transfer count */ - out_8((u8 *)IIC_XFRCNT, 0); + out_8(&i2c->xfrcnt, 0); /* clear extended control & stat */ /* write 1 in SRC SRS SWC SWS to clear these fields */ - out_8((u8 *)IIC_XTCNTLSS, 0xF0); + out_8(&i2c->xtcntlss, 0xF0); /* Mode Control Register Flush Slave/Master data buffer */ - out_8((u8 *)IIC_MDCNTL, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB); + out_8(&i2c->mdcntl, IIC_MDCNTL_FSDB | IIC_MDCNTL_FMDB); - val = in_8((u8 *)IIC_MDCNTL); + val = in_8(&i2c->mdcntl); /* Ignore General Call, slave transfers are ignored, * disable interrupts, exit unknown bus state, enable hold * SCL 100kHz normaly or FastMode for 400kHz and above */ - val |= IIC_MDCNTL_EUBS|IIC_MDCNTL_HSCL; + val |= IIC_MDCNTL_EUBS | IIC_MDCNTL_HSCL; if (speed >= 400000) val |= IIC_MDCNTL_FSM; - out_8((u8 *)IIC_MDCNTL, val); + out_8(&i2c->mdcntl, val); /* clear control reg */ - out_8((u8 *)IIC_CNTL, 0x00); + out_8(&i2c->cntl, 0x00); } /* set to SPD bus as default bus upon powerup */ @@ -195,13 +198,14 @@ static int i2c_transfer(unsigned char cmd_type, unsigned char data[], unsigned short data_len) { - unsigned char* ptr; + struct ppc4xx_i2c *i2c = (struct ppc4xx_i2c *)I2C_BASE_ADDR; + u8 *ptr; int reading; - int tran,cnt; + int tran, cnt; int result; int status; int i; - uchar creg; + u8 creg; if (data == 0 || data_len == 0) { /* Don't support data transfer of no length or to address 0 */ @@ -219,12 +223,13 @@ static int i2c_transfer(unsigned char cmd_type, } /* Clear Stop Complete Bit */ - out_8((u8 *)IIC_STS, IIC_STS_SCMP); + out_8(&i2c->sts, IIC_STS_SCMP); + /* Check init */ i = 10; do { /* Get status */ - status = in_8((u8 *)IIC_STS); + status = in_8(&i2c->sts); i--; } while ((status & IIC_STS_PT) && (i > 0)); @@ -232,13 +237,16 @@ static int i2c_transfer(unsigned char cmd_type, result = IIC_NOK_TOUT; return(result); } + /* flush the Master/Slave Databuffers */ - out_8((u8 *)IIC_MDCNTL, ((in_8((u8 *)IIC_MDCNTL))|IIC_MDCNTL_FMDB|IIC_MDCNTL_FSDB)); + out_8(&i2c->mdcntl, in_8(&i2c->mdcntl) | + IIC_MDCNTL_FMDB | IIC_MDCNTL_FSDB); + /* need to wait 4 OPB clocks? code below should take that long */ /* 7-bit adressing */ - out_8((u8 *)IIC_HMADR, 0); - out_8((u8 *)IIC_LMADR, chip); + out_8(&i2c->hmadr, 0); + out_8(&i2c->lmadr, chip); tran = 0; result = IIC_OK; @@ -247,9 +255,10 @@ static int i2c_transfer(unsigned char cmd_type, while (tran != cnt && (result == IIC_OK)) { int bc,j; - /* Control register = - * Normal transfer, 7-bits adressing, Transfer up to bc bytes, Normal start, - * Transfer is a sequence of transfers + /* + * Control register = + * Normal transfer, 7-bits adressing, Transfer up to + * bc bytes, Normal start, Transfer is a sequence of transfers */ creg |= IIC_CNTL_PT; @@ -259,32 +268,36 @@ static int i2c_transfer(unsigned char cmd_type, if ((!cmd_type && (ptr == addr)) || ((tran + bc) != cnt)) creg |= IIC_CNTL_CHT; - if (reading) + if (reading) { creg |= IIC_CNTL_READ; - else - for(j=0; j < bc; j++) + } else { + for(j = 0; j < bc; j++) { /* Set buffer */ - out_8((u8 *)IIC_MDBUF, ptr[tran+j]); - out_8((u8 *)IIC_CNTL, creg); + out_8(&i2c->mdbuf, ptr[tran + j]); + } + } + out_8(&i2c->cntl, creg); - /* Transfer is in progress + /* + * Transfer is in progress * we have to wait for upto 5 bytes of data * 1 byte chip address+r/w bit then bc bytes * of data. * udelay(10) is 1 bit time at 100khz * Doubled for slop. 20 is too small. */ - i = 2*5*8; + i = 2 * 5 * 8; do { /* Get status */ - status = in_8((u8 *)IIC_STS); + status = in_8(&i2c->sts); udelay(10); i--; - } while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR) && (i > 0)); + } while ((status & IIC_STS_PT) && !(status & IIC_STS_ERR) && + (i > 0)); if (status & IIC_STS_ERR) { result = IIC_NOK; - status = in_8((u8 *)IIC_EXTSTS); + status = in_8(&i2c->extsts); /* Lost arbitration? */ if (status & IIC_EXTSTS_LA) result = IIC_NOK_LA; @@ -297,19 +310,21 @@ static int i2c_transfer(unsigned char cmd_type, } else if ( status & IIC_STS_PT) { result = IIC_NOK_TOUT; } + /* Command is reading => get buffer */ if ((reading) && (result == IIC_OK)) { /* Are there data in buffer */ if (status & IIC_STS_MDBS) { /* - * even if we have data we have to wait 4OPB clocks - * for it to hit the front of the FIFO, after that - * we can just read. We should check XFCNT here and - * if the FIFO is full there is no need to wait. + * even if we have data we have to wait 4OPB + * clocks for it to hit the front of the FIFO, + * after that we can just read. We should check + * XFCNT here and if the FIFO is full there is + * no need to wait. */ udelay(1); - for (j=0; j<bc; j++) - ptr[tran+j] = in_8((u8 *)IIC_MDBUF); + for (j = 0; j < bc; j++) + ptr[tran + j] = in_8(&i2c->mdbuf); } else result = IIC_NOK_DATA; } @@ -324,7 +339,7 @@ static int i2c_transfer(unsigned char cmd_type, creg = IIC_CNTL_RPST; } } - return (result); + return result; } int i2c_probe(uchar chip) @@ -338,17 +353,17 @@ int i2c_probe(uchar chip) * address was <ACK>ed (i.e. there was a chip at that address which * drove the data line low). */ - return (i2c_transfer(1, chip << 1, 0,0, buf, 1) != 0); + return (i2c_transfer(1, chip << 1, 0, 0, buf, 1) != 0); } - -int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len) +static int ppc4xx_i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer, + int len, int read) { uchar xaddr[4]; int ret; if (alen > 4) { - printf ("I2C read: addr len %d not supported\n", alen); + printf("I2C: addr len %d not supported\n", alen); return 1; } @@ -373,50 +388,30 @@ int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len) * hidden in the chip address. */ if (alen > 0) - chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); + chip |= ((addr >> (alen * 8)) & + CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); #endif - if ((ret = i2c_transfer(1, chip<<1, &xaddr[4-alen], alen, buffer, len)) != 0) { - if (gd->have_console) - printf( "I2c read: failed %d\n", ret); + if ((ret = i2c_transfer(read, chip << 1, &xaddr[4 - alen], alen, + buffer, len)) != 0) { + if (gd->have_console) { + printf("I2C %s: failed %d\n", + read ? "read" : "write", ret); + } + return 1; } + return 0; } -int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len) +int i2c_read(uchar chip, uint addr, int alen, uchar * buffer, int len) { - uchar xaddr[4]; - - if (alen > 4) { - printf ("I2C write: addr len %d not supported\n", alen); - return 1; - - } - - if (alen > 0) { - xaddr[0] = (addr >> 24) & 0xFF; - xaddr[1] = (addr >> 16) & 0xFF; - xaddr[2] = (addr >> 8) & 0xFF; - xaddr[3] = addr & 0xFF; - } - -#ifdef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW - /* - * EEPROM chips that implement "address overflow" are ones - * like Catalyst 24WC04/08/16 which has 9/10/11 bits of - * address and the extra bits end up in the "chip address" - * bit slots. This makes a 24WC08 (1Kbyte) chip look like - * four 256 byte chips. - * - * Note that we consider the length of the address field to - * still be one byte because the extra address bits are - * hidden in the chip address. - */ - if (alen > 0) - chip |= ((addr >> (alen * 8)) & CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW); -#endif + return ppc4xx_i2c_transfer(chip, addr, alen, buffer, len, 1); +} - return (i2c_transfer(0, chip<<1, &xaddr[4-alen], alen, buffer, len ) != 0); +int i2c_write(uchar chip, uint addr, int alen, uchar * buffer, int len) +{ + return ppc4xx_i2c_transfer(chip, addr, alen, buffer, len, 0); } #if defined(CONFIG_I2C_MULTI_BUS) diff --git a/board/pcs440ep/u-boot.lds b/cpu/ppc4xx/u-boot.lds index 2f61091..2b47934 100644 --- a/board/pcs440ep/u-boot.lds +++ b/cpu/ppc4xx/u-boot.lds @@ -1,6 +1,5 @@ /* - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * Copyright 2007-2009 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -21,21 +20,23 @@ * MA 02111-1307 USA */ +#include "config.h" /* CONFIG_BOARDDIR */ + +#ifndef RESET_VECTOR_ADDRESS +#define RESET_VECTOR_ADDRESS 0xfffffffc +#endif + OUTPUT_ARCH(powerpc) /* Do we need any of these for elf? __DYNAMIC = 0; */ -SECTIONS +PHDRS { - .resetvec 0xFFFFFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xFFFFF000 : - { - cpu/ppc4xx/start.o (.bootpg) - } = 0xffff + text PT_LOAD; + bss PT_LOAD; +} +SECTIONS +{ /* Read-only sections, merged into text segment: */ . = + SIZEOF_HEADERS; .interp : { *(.interp) } @@ -62,20 +63,16 @@ SECTIONS .plt : { *(.plt) } .text : { - cpu/ppc4xx/start.o (.text) - board/pcs440ep/init.o (.text) - lib_generic/sha1.o (.text) - *(.text) *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { + } :text + _etext = .; + PROVIDE (etext = .); + .rodata : + { *(.eh_frame) *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } + } :text .fini : { *(.fini) } =0 .ctors : { *(.ctors) } .dtors : { *(.dtors) } @@ -124,6 +121,39 @@ SECTIONS . = ALIGN(256); __init_end = .; +#ifdef CONFIG_440 + .bootpg RESET_VECTOR_ADDRESS - 0xffc : + { + cpu/ppc4xx/start.o (.bootpg) + + /* + * PPC440 board need a board specific object with the + * TLB definitions. This needs to get included right after + * start.o, since the first shadow TLB only covers 4k + * of address space. + */ + CONFIG_BOARDDIR/init.o (.bootpg) + } :text = 0xffff +#endif + + .resetvec RESET_VECTOR_ADDRESS : + { + *(.resetvec) + } :text = 0xffff + + . = RESET_VECTOR_ADDRESS + 0x4; + + /* + * Make sure that the bss segment isn't linked at 0x0, otherwise its + * address won't be updated during relocation fixups. Note that + * this is a temporary fix. Code to dynamically the fixup the bss + * location will be added in the future. When the bss relocation + * fixup code is present this workaround should be removed. + */ +#if (RESET_VECTOR_ADDRESS == 0xfffffffc) + . |= 0x10; +#endif + __bss_start = .; .bss (NOLOAD) : { @@ -131,9 +161,9 @@ SECTIONS *(.dynbss) *(.bss) *(COMMON) - . = ALIGN(4); - } + } :bss + . = ALIGN(4); _end = . ; PROVIDE (end = .); } diff --git a/cpu/pxa/timer.c b/cpu/pxa/timer.c index e2df3a5..8d0f826 100644 --- a/cpu/pxa/timer.c +++ b/cpu/pxa/timer.c @@ -78,7 +78,7 @@ void set_timer (ulong t) /* nop */ } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { udelay_masked (usec); } diff --git a/cpu/s3c44b0/timer.c b/cpu/s3c44b0/timer.c index 34184ab..6f1d8f6 100644 --- a/cpu/s3c44b0/timer.c +++ b/cpu/s3c44b0/timer.c @@ -75,7 +75,7 @@ void set_timer (ulong t) timestamp = t; } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { ulong tmo; diff --git a/cpu/sa1100/timer.c b/cpu/sa1100/timer.c index 3f77e81..0207501 100644 --- a/cpu/sa1100/timer.c +++ b/cpu/sa1100/timer.c @@ -49,7 +49,7 @@ void set_timer (ulong t) /* nop */ } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { udelay_masked (usec); } diff --git a/disk/part.c b/disk/part.c index 9ced452..b6bae17 100644 --- a/disk/part.c +++ b/disk/part.c @@ -196,7 +196,7 @@ void dev_print (block_dev_desc_t *dev_desc) if (dev_desc->lba48) printf (" Supports 48-bit addressing\n"); #endif -#if defined(CONFIG_SYS_64BIT_LBA) && defined(CONFIG_SYS_64BIT_VSPRINTF) +#if defined(CONFIG_SYS_64BIT_LBA) printf (" Capacity: %ld.%ld MB = %ld.%ld GB (%Ld x %ld)\n", mb_quot, mb_rem, gb_quot, gb_rem, diff --git a/doc/README.davinci b/doc/README.davinci new file mode 100644 index 0000000..506f0d4 --- /dev/null +++ b/doc/README.davinci @@ -0,0 +1,116 @@ +Summary +======= + +This README is about U-Boot support for TI's ARM 926EJS based family of SoCs. +These SOCs are used for cameras, video security and surveillance, DVR's, etc. +DaVinci SOC's comprise of DM644x, DM646x, DM35x and DM36x series of SOC's +Additionally there are some SOCs meant for the audio market which though have +an OMAP part number are very similar to the DaVinci series of SOC's +Additionally, some family members contain a TI DSP and/or graphics +co processors along with a host of other peripherals. + +Currently the following boards are supported: + +* TI DaVinci DM644x EVM + +* TI DaVinci DM646x EVM + +* TI DaVinci DM355 EVM + +* TI DaVinci DM365 EVM + +* TI DA830 EVM + +* DM355 based Leopard board + +* DM644x based schmoogie board + +* DM644x based sffsdr board + +* DM644x based sonata board + +Build +===== + +* TI DaVinci DM644x EVM: + +make davinci_dvevm_config +make + +* TI DaVinci DM646x EVM: + +make davinci_dm6467evm_config +make + +* TI DaVinci DM355 EVM: + +make davinci_dm355evm_config +make + +* TI DaVinci DM365 EVM: + +make davinci_dm365evm_config +make + +* TI DA830 EVM: + +make da830evm_config +make + +* DM355 based Leopard board: + +make davinci_dm355leopard_config +make + +* DM644x based schmoogie board: + +make davinci_schmoogie_config +make + +* DM644x based sffsdr board: + +make davinci_sffsdr_config +make + +* DM644x based sonata board: + +make davinci_sonata_config +make + +Bootloaders +=============== + +The DaVinci SOC's use 2 bootloaders. The low level initialization +is done by a UBL(user boot loader). The UBL is written to a NAND/NOR/SPI flash +by a programmer. During initial bootup, the ROM Bootloader reads the UBL +from a storage device and loads it into the IRAM. The UBL then loads the U-Boot +into the RAM. +The programmers and UBL are always released as part of any standard TI +software release associated with an SOC. + +Links +===== + +1) TI DaVinci DM355 EVM: +http://focus.ti.com/docs/prod/folders/print/tms320dm355.html +http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=203&osCsid=c499af6087317f11b3da19b4e8f1af32 + +2) TI DaVinci DM365 EVM: +http://focus.ti.com/docs/prod/folders/print/tms320dm365.html?247SEM= +http://support.spectrumdigital.com/boards/evmdm365/revc/ + +3) DaVinci DM355 based leopard board +http://designsomething.org/leopardboard/default.aspx +http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=192&osCsid=67c20335668ffc57cb35727106eb24b1 + +4) TI DaVinci DM6467 EVM: +http://focus.ti.com/docs/prod/folders/print/tms320dm6467.html +http://support.spectrumdigital.com/boards/evmdm6467/revf/ + +5) TI DaVinci DM6446 EVM: +http://focus.ti.com/docs/prod/folders/print/tms320dm6446.html +http://www.spectrumdigital.com/product_info.php?cPath=103&products_id=222 + +6) TI DA830 EVM +http://focus.ti.com/apps/docs/gencontent.tsp?appId=1&contentId=52385 +http://www.spectrumdigital.com/product_info.php?cPath=37&products_id=214 diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 4a12976..b860e89 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -33,6 +33,7 @@ COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o +COBJS-$(CONFIG_PCA9564_I2C) += pca9564_i2c.o COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o diff --git a/drivers/i2c/bfin-twi_i2c.c b/drivers/i2c/bfin-twi_i2c.c index e790634..73a78d2 100644 --- a/drivers/i2c/bfin-twi_i2c.c +++ b/drivers/i2c/bfin-twi_i2c.c @@ -26,6 +26,7 @@ #ifdef TWI0_CLKDIV #define bfin_write_TWI_CLKDIV(val) bfin_write_TWI0_CLKDIV(val) +#define bfin_read_TWI_CLKDIV(val) bfin_read_TWI0_CLKDIV(val) #define bfin_write_TWI_CONTROL(val) bfin_write_TWI0_CONTROL(val) #define bfin_read_TWI_CONTROL(val) bfin_read_TWI0_CONTROL(val) #define bfin_write_TWI_MASTER_ADDR(val) bfin_write_TWI0_MASTER_ADDR(val) @@ -44,8 +45,21 @@ #ifdef CONFIG_TWICLK_KHZ # error do not define CONFIG_TWICLK_KHZ ... use CONFIG_SYS_I2C_SPEED #endif -#if CONFIG_SYS_I2C_SPEED > 400000 -# error The Blackfin I2C hardware can only operate at 400KHz max + +/* + * The way speed is changed into duty often results in integer truncation + * with 50% duty, so we'll force rounding up to the next duty by adding 1 + * to the max. In practice this will get us a speed of something like + * 385 KHz. The other limit is easy to handle as it is only 8 bits. + */ +#define I2C_SPEED_MAX 400000 +#define I2C_SPEED_TO_DUTY(speed) (5000000 / (speed)) +#define I2C_DUTY_MAX (I2C_SPEED_TO_DUTY(I2C_SPEED_MAX) + 1) +#define I2C_DUTY_MIN 0xff /* 8 bit limited */ +#define SYS_I2C_DUTY I2C_SPEED_TO_DUTY(CONFIG_SYS_I2C_SPEED) +/* Note: duty is inverse of speed, so the comparisons below are correct */ +#if SYS_I2C_DUTY < I2C_DUTY_MAX || SYS_I2C_DUTY > I2C_DUTY_MIN +# error "The Blackfin I2C hardware can only operate 20KHz - 400KHz" #endif /* All transfers are described by this data structure */ @@ -60,6 +74,9 @@ struct i2c_msg { u8 *abuf; /* addr buffer */ }; +/* Allow msec timeout per ~byte transfer */ +#define I2C_TIMEOUT 10 + /** * wait_for_completion - manage the actual i2c transfer * @msg: the i2c msg @@ -67,8 +84,9 @@ struct i2c_msg { static int wait_for_completion(struct i2c_msg *msg) { uint16_t int_stat; + ulong timebase = get_timer(0); - while (!ctrlc()) { + do { int_stat = bfin_read_TWI_INT_STAT(); if (int_stat & XMTSERV) { @@ -103,7 +121,7 @@ static int wait_for_completion(struct i2c_msg *msg) debugi("processing MERR"); bfin_write_TWI_INT_STAT(MERR); SSYNC(); - break; + return msg->len; } if (int_stat & MCOMP) { debugi("processing MCOMP"); @@ -116,7 +134,12 @@ static int wait_for_completion(struct i2c_msg *msg) } else break; } - } + + /* If we were able to do something, reset timeout */ + if (int_stat) + timebase = get_timer(0); + + } while (get_timer(timebase) < I2C_TIMEOUT); return msg->len; } @@ -204,7 +227,36 @@ static int i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer, int len, return ret; } -/* +/** + * i2c_set_bus_speed - set i2c bus speed + * @speed: bus speed (in HZ) + */ +int i2c_set_bus_speed(unsigned int speed) +{ + u16 clkdiv = I2C_SPEED_TO_DUTY(speed); + + /* Set TWI interface clock */ + if (clkdiv < I2C_DUTY_MAX || clkdiv > I2C_DUTY_MIN) + return -1; + bfin_write_TWI_CLKDIV((clkdiv << 8) | (clkdiv & 0xff)); + + /* Don't turn it on */ + bfin_write_TWI_MASTER_CTL(speed > 100000 ? FAST : 0); + + return 0; +} + +/** + * i2c_get_bus_speed - get i2c bus speed + * @speed: bus speed (in HZ) + */ +unsigned int i2c_get_bus_speed(void) +{ + /* 10 MHz / (2 * CLKDIV) -> 5 MHz / CLKDIV */ + return 5000000 / (bfin_read_TWI_CLKDIV() & 0xff); +} + +/** * i2c_init - initialize the i2c bus * @speed: bus speed (in HZ) * @slaveaddr: address of device in slave mode (0 - not slave) @@ -220,15 +272,9 @@ void i2c_init(int speed, int slaveaddr) bfin_write_TWI_CONTROL(prescale); /* Set TWI interface clock as specified */ - bfin_write_TWI_CLKDIV( - ((5 * 1024 / (speed / 1000)) << 8) | - ((5 * 1024 / (speed / 1000)) & 0xFF) - ); - - /* Don't turn it on */ - bfin_write_TWI_MASTER_CTL(speed > 100000 ? FAST : 0); + i2c_set_bus_speed(speed); - /* But enable it */ + /* Enable it */ bfin_write_TWI_CONTROL(TWI_ENA | prescale); SSYNC(); diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index 1a4c8c9..ff18991 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -29,6 +29,11 @@ static void wait_for_bb (void); static u16 wait_for_pin (void); static void flush_fifo(void); +static struct i2c *i2c_base = (struct i2c *)I2C_DEFAULT_BASE; + +static unsigned int bus_initialized[I2C_BUS_MAX]; +static unsigned int current_bus; + void i2c_init (int speed, int slaveadd) { int psc, fsscll, fssclh; @@ -95,30 +100,32 @@ void i2c_init (int speed, int slaveadd) sclh = (unsigned int)fssclh; } - writew(0x2, I2C_SYSC); /* for ES2 after soft reset */ + writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */ udelay(1000); - writew(0x0, I2C_SYSC); /* will probably self clear but */ + writew(0x0, &i2c_base->sysc); /* will probably self clear but */ - if (readw (I2C_CON) & I2C_CON_EN) { - writew (0, I2C_CON); + if (readw (&i2c_base->con) & I2C_CON_EN) { + writew (0, &i2c_base->con); udelay (50000); } - writew(psc, I2C_PSC); - writew(scll, I2C_SCLL); - writew(sclh, I2C_SCLH); + writew(psc, &i2c_base->psc); + writew(scll, &i2c_base->scll); + writew(sclh, &i2c_base->sclh); /* own address */ - writew (slaveadd, I2C_OA); - writew (I2C_CON_EN, I2C_CON); + writew (slaveadd, &i2c_base->oa); + writew (I2C_CON_EN, &i2c_base->con); /* have to enable intrrupts or OMAP i2c module doesn't work */ writew (I2C_IE_XRDY_IE | I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | - I2C_IE_NACK_IE | I2C_IE_AL_IE, I2C_IE); + I2C_IE_NACK_IE | I2C_IE_AL_IE, &i2c_base->ie); udelay (1000); flush_fifo(); - writew (0xFFFF, I2C_STAT); - writew (0, I2C_CNT); + writew (0xFFFF, &i2c_base->stat); + writew (0, &i2c_base->cnt); + + bus_initialized[current_bus] = 1; } static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value) @@ -130,19 +137,19 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value) wait_for_bb (); /* one byte only */ - writew (1, I2C_CNT); + writew (1, &i2c_base->cnt); /* set slave address */ - writew (devaddr, I2C_SA); + writew (devaddr, &i2c_base->sa); /* no stop bit needed here */ - writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, I2C_CON); + writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX, &i2c_base->con); status = wait_for_pin (); if (status & I2C_STAT_XRDY) { /* Important: have to use byte access */ - writeb (regoffset, I2C_DATA); + writeb (regoffset, &i2c_base->data); udelay (20000); - if (readw (I2C_STAT) & I2C_STAT_NACK) { + if (readw (&i2c_base->stat) & I2C_STAT_NACK) { i2c_error = 1; } } else { @@ -151,28 +158,28 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value) if (!i2c_error) { /* free bus, otherwise we can't use a combined transction */ - writew (0, I2C_CON); - while (readw (I2C_STAT) || (readw (I2C_CON) & I2C_CON_MST)) { + writew (0, &i2c_base->con); + while (readw (&i2c_base->stat) || (readw (&i2c_base->con) & I2C_CON_MST)) { udelay (10000); /* Have to clear pending interrupt to clear I2C_STAT */ - writew (0xFFFF, I2C_STAT); + writew (0xFFFF, &i2c_base->stat); } wait_for_bb (); /* set slave address */ - writew (devaddr, I2C_SA); + writew (devaddr, &i2c_base->sa); /* read one byte from slave */ - writew (1, I2C_CNT); + writew (1, &i2c_base->cnt); /* need stop bit here */ writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, - I2C_CON); + &i2c_base->con); status = wait_for_pin (); if (status & I2C_STAT_RRDY) { #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) - *value = readb (I2C_DATA); + *value = readb (&i2c_base->data); #else - *value = readw (I2C_DATA); + *value = readw (&i2c_base->data); #endif udelay (20000); } else { @@ -180,17 +187,17 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value) } if (!i2c_error) { - writew (I2C_CON_EN, I2C_CON); - while (readw (I2C_STAT) - || (readw (I2C_CON) & I2C_CON_MST)) { + writew (I2C_CON_EN, &i2c_base->con); + while (readw (&i2c_base->stat) + || (readw (&i2c_base->con) & I2C_CON_MST)) { udelay (10000); - writew (0xFFFF, I2C_STAT); + writew (0xFFFF, &i2c_base->stat); } } } flush_fifo(); - writew (0xFFFF, I2C_STAT); - writew (0, I2C_CNT); + writew (0xFFFF, &i2c_base->stat); + writew (0, &i2c_base->cnt); return i2c_error; } @@ -203,12 +210,12 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value) wait_for_bb (); /* two bytes */ - writew (2, I2C_CNT); + writew (2, &i2c_base->cnt); /* set slave address */ - writew (devaddr, I2C_SA); + writew (devaddr, &i2c_base->sa); /* stop bit needed here */ writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | - I2C_CON_STP, I2C_CON); + I2C_CON_STP, &i2c_base->con); /* wait until state change */ status = wait_for_pin (); @@ -216,24 +223,24 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value) if (status & I2C_STAT_XRDY) { #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) /* send out 1 byte */ - writeb (regoffset, I2C_DATA); - writew (I2C_STAT_XRDY, I2C_STAT); + writeb (regoffset, &i2c_base->data); + writew (I2C_STAT_XRDY, &i2c_base->stat); status = wait_for_pin (); if ((status & I2C_STAT_XRDY)) { /* send out next 1 byte */ - writeb (value, I2C_DATA); - writew (I2C_STAT_XRDY, I2C_STAT); + writeb (value, &i2c_base->data); + writew (I2C_STAT_XRDY, &i2c_base->stat); } else { i2c_error = 1; } #else /* send out two bytes */ - writew ((value << 8) + regoffset, I2C_DATA); + writew ((value << 8) + regoffset, &i2c_base->data); #endif /* must have enough delay to allow BB bit to go low */ udelay (50000); - if (readw (I2C_STAT) & I2C_STAT_NACK) { + if (readw (&i2c_base->stat) & I2C_STAT_NACK) { i2c_error = 1; } } else { @@ -243,18 +250,18 @@ static int i2c_write_byte (u8 devaddr, u8 regoffset, u8 value) if (!i2c_error) { int eout = 200; - writew (I2C_CON_EN, I2C_CON); - while ((stat = readw (I2C_STAT)) || (readw (I2C_CON) & I2C_CON_MST)) { + writew (I2C_CON_EN, &i2c_base->con); + while ((stat = readw (&i2c_base->stat)) || (readw (&i2c_base->con) & I2C_CON_MST)) { udelay (1000); /* have to read to clear intrrupt */ - writew (0xFFFF, I2C_STAT); + writew (0xFFFF, &i2c_base->stat); if(--eout == 0) /* better leave with error than hang */ break; } } flush_fifo(); - writew (0xFFFF, I2C_STAT); - writew (0, I2C_CNT); + writew (0xFFFF, &i2c_base->stat); + writew (0, &i2c_base->cnt); return i2c_error; } @@ -265,14 +272,14 @@ static void flush_fifo(void) * you get a bus error */ while(1){ - stat = readw(I2C_STAT); + stat = readw(&i2c_base->stat); if(stat == I2C_STAT_RRDY){ #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) - readb(I2C_DATA); + readb(&i2c_base->data); #else - readw(I2C_DATA); + readw(&i2c_base->data); #endif - writew(I2C_STAT_RRDY,I2C_STAT); + writew(I2C_STAT_RRDY,&i2c_base->stat); udelay(1000); }else break; @@ -283,7 +290,7 @@ int i2c_probe (uchar chip) { int res = 1; /* default = fail */ - if (chip == readw (I2C_OA)) { + if (chip == readw (&i2c_base->oa)) { return res; } @@ -291,27 +298,27 @@ int i2c_probe (uchar chip) wait_for_bb (); /* try to read one byte */ - writew (1, I2C_CNT); + writew (1, &i2c_base->cnt); /* set slave address */ - writew (chip, I2C_SA); + writew (chip, &i2c_base->sa); /* stop bit needed here */ - writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, I2C_CON); + writew (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP, &i2c_base->con); /* enough delay for the NACK bit set */ udelay (50000); - if (!(readw (I2C_STAT) & I2C_STAT_NACK)) { + if (!(readw (&i2c_base->stat) & I2C_STAT_NACK)) { res = 0; /* success case */ flush_fifo(); - writew(0xFFFF, I2C_STAT); + writew(0xFFFF, &i2c_base->stat); } else { - writew(0xFFFF, I2C_STAT); /* failue, clear sources*/ - writew (readw (I2C_CON) | I2C_CON_STP, I2C_CON); /* finish up xfer */ + writew(0xFFFF, &i2c_base->stat); /* failue, clear sources*/ + writew (readw (&i2c_base->con) | I2C_CON_STP, &i2c_base->con); /* finish up xfer */ udelay(20000); wait_for_bb (); } flush_fifo(); - writew (0, I2C_CNT); /* don't allow any more data in...we don't want it.*/ - writew(0xFFFF, I2C_STAT); + writew (0, &i2c_base->cnt); /* don't allow any more data in...we don't want it.*/ + writew(0xFFFF, &i2c_base->stat); return res; } @@ -370,17 +377,17 @@ static void wait_for_bb (void) int timeout = 10; u16 stat; - writew(0xFFFF, I2C_STAT); /* clear current interruts...*/ - while ((stat = readw (I2C_STAT) & I2C_STAT_BB) && timeout--) { - writew (stat, I2C_STAT); + writew(0xFFFF, &i2c_base->stat); /* clear current interruts...*/ + while ((stat = readw (&i2c_base->stat) & I2C_STAT_BB) && timeout--) { + writew (stat, &i2c_base->stat); udelay (50000); } if (timeout <= 0) { printf ("timed out in wait_for_bb: I2C_STAT=%x\n", - readw (I2C_STAT)); + readw (&i2c_base->stat)); } - writew(0xFFFF, I2C_STAT); /* clear delayed stuff*/ + writew(0xFFFF, &i2c_base->stat); /* clear delayed stuff*/ } static u16 wait_for_pin (void) @@ -390,7 +397,7 @@ static u16 wait_for_pin (void) do { udelay (1000); - status = readw (I2C_STAT); + status = readw (&i2c_base->stat); } while ( !(status & (I2C_STAT_ROVR | I2C_STAT_XUDF | I2C_STAT_XRDY | I2C_STAT_RRDY | I2C_STAT_ARDY | I2C_STAT_NACK | @@ -398,8 +405,33 @@ static u16 wait_for_pin (void) if (timeout <= 0) { printf ("timed out in wait_for_pin: I2C_STAT=%x\n", - readw (I2C_STAT)); - writew(0xFFFF, I2C_STAT); + readw (&i2c_base->stat)); + writew(0xFFFF, &i2c_base->stat); } return status; } + +int i2c_set_bus_num(unsigned int bus) +{ + if ((bus < 0) || (bus >= I2C_BUS_MAX)) { + printf("Bad bus: %d\n", bus); + return -1; + } + +#if I2C_BUS_MAX==3 + if (bus == 2) + i2c_base = (struct i2c *)I2C_BASE3; + else +#endif + if (bus == 1) + i2c_base = (struct i2c *)I2C_BASE2; + else + i2c_base = (struct i2c *)I2C_BASE1; + + current_bus = bus; + + if(!bus_initialized[current_bus]) + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + + return 0; +} diff --git a/drivers/i2c/pca9564_i2c.c b/drivers/i2c/pca9564_i2c.c new file mode 100644 index 0000000..199a9ee --- /dev/null +++ b/drivers/i2c/pca9564_i2c.c @@ -0,0 +1,189 @@ +/* + * File: drivers/i2c/pca9564.c + * Based on: drivers/i2c/s3c44b0_i2c.c + * Author: + * + * Created: 2009-06-23 + * Description: PCA9564 i2c bridge driver + * + * Modified: + * Copyright 2009 CJSC "NII STT", http://www.niistt.ru/ + * + * Bugs: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <common.h> +#include <i2c.h> +#include <pca9564.h> +#include <asm/io.h> + +#define PCA_STA (CONFIG_PCA9564_BASE + 0) +#define PCA_TO (CONFIG_PCA9564_BASE + 0) +#define PCA_DAT (CONFIG_PCA9564_BASE + (1 << 2)) +#define PCA_ADR (CONFIG_PCA9564_BASE + (2 << 2)) +#define PCA_CON (CONFIG_PCA9564_BASE + (3 << 2)) + +static unsigned char pca_read_reg(unsigned int reg) +{ + return readb((void *)reg); +} + +static void pca_write_reg(unsigned int reg, unsigned char value) +{ + writeb(value, (void *)reg); +} + +static int pca_wait_busy(void) +{ + unsigned int timeout = 10000; + + while (!(pca_read_reg(PCA_CON) & PCA_CON_SI) && --timeout) + udelay(1); + + if (timeout == 0) + debug("I2C timeout!\n"); + + debug("CON = 0x%02x, STA = 0x%02x\n", pca_read_reg(PCA_CON), + pca_read_reg(PCA_STA)); + + return timeout ? 0 : 1; +} + +/*=====================================================================*/ +/* Public Functions */ +/*=====================================================================*/ + +/*----------------------------------------------------------------------- + * Initialization + */ +void i2c_init(int speed, int slaveaddr) +{ + pca_write_reg(PCA_CON, PCA_CON_ENSIO | speed); +} + +/* + * Probe the given I2C chip address. Returns 0 if a chip responded, + * not 0 on failure. + */ + +int i2c_probe(uchar chip) +{ + unsigned char res; + + pca_write_reg(PCA_CON, PCA_CON_STA | PCA_CON_ENSIO); + pca_wait_busy(); + + pca_write_reg(PCA_CON, PCA_CON_STA | PCA_CON_ENSIO); + + pca_write_reg(PCA_DAT, (chip << 1) | 1); + res = pca_wait_busy(); + + if ((res == 0) && (pca_read_reg(PCA_STA) == 0x48)) + res = 1; + + pca_write_reg(PCA_CON, PCA_CON_STO | PCA_CON_ENSIO); + + return res; +} + +/* + * Read/Write interface: + * chip: I2C chip address, range 0..127 + * addr: Memory (register) address within the chip + * alen: Number of bytes to use for addr (typically 1, 2 for larger + * memories, 0 for register type devices with only one + * register) + * buffer: Where to read/write the data + * len: How many bytes to read/write + * + * Returns: 0 on success, not 0 on failure + */ +int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) +{ + int i; + + pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STA); + pca_wait_busy(); + + pca_write_reg(PCA_CON, PCA_CON_ENSIO); + + pca_write_reg(PCA_DAT, (chip << 1)); + pca_wait_busy(); + pca_write_reg(PCA_CON, PCA_CON_ENSIO); + + if (alen > 0) { + pca_write_reg(PCA_DAT, addr); + pca_wait_busy(); + pca_write_reg(PCA_CON, PCA_CON_ENSIO); + } + + pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STO); + + udelay(500); + + pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STA); + pca_wait_busy(); + pca_write_reg(PCA_CON, PCA_CON_ENSIO); + + pca_write_reg(PCA_DAT, (chip << 1) | 1); + pca_wait_busy(); + + for (i = 0; i < len; ++i) { + if (i == len - 1) + pca_write_reg(PCA_CON, PCA_CON_ENSIO); + else + pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_AA); + + pca_wait_busy(); + buffer[i] = pca_read_reg(PCA_DAT); + + } + + pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STO); + + return 0; +} + +int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) +{ + int i; + + pca_write_reg(PCA_CON, PCA_CON_ENSIO | PCA_CON_STA); + pca_wait_busy(); + pca_write_reg(PCA_CON, PCA_CON_ENSIO); + + pca_write_reg(PCA_DAT, chip << 1); + pca_wait_busy(); + pca_write_reg(PCA_CON, PCA_CON_ENSIO); + + if (alen > 0) { + pca_write_reg(PCA_DAT, addr); + pca_wait_busy(); + pca_write_reg(PCA_CON, PCA_CON_ENSIO); + } + + for (i = 0; i < len; ++i) { + pca_write_reg(PCA_DAT, buffer[i]); + pca_wait_busy(); + pca_write_reg(PCA_CON, PCA_CON_ENSIO); + } + + pca_write_reg(PCA_CON, PCA_CON_STO | PCA_CON_ENSIO); + + return 0; +} diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index 55c6a12..c8371cf 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -27,11 +27,7 @@ */ #include <common.h> -#if defined(CONFIG_S3C2400) -#include <s3c2400.h> -#elif defined(CONFIG_S3C2410) -#include <s3c2410.h> -#endif +#include <asm/arch/s3c24x0_cpu.h> #include <asm/io.h> #include <i2c.h> diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index 59883a5..9a48783 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -34,6 +34,11 @@ #include <asm/io.h> #include <asm/arch/hardware.h> #endif +#ifdef CONFIG_AT91SAM9263 /* only valid for AT91SAM9263 */ +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#endif #ifdef CONFIG_IXP425 /* only valid for IXP425 */ #include <asm/arch/ixp425.h> #endif diff --git a/drivers/mmc/omap3_mmc.c b/drivers/mmc/omap3_mmc.c index 513dd25..96c0e65 100644 --- a/drivers/mmc/omap3_mmc.c +++ b/drivers/mmc/omap3_mmc.c @@ -63,7 +63,9 @@ unsigned char mmc_board_init(void) { t2_t *t2_base = (t2_t *)T2_BASE; +#if defined(CONFIG_TWL4030_POWER) twl4030_power_mmc_init(); +#endif writel(readl(&t2_base->pbias_lite) | PBIASLITEPWRDNZ1 | PBIASSPEEDCTRL0 | PBIASLITEPWRDNZ0, diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index eabaf3e..41a9568 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -182,13 +182,7 @@ static int nand_davinci_correct_data(struct mtd_info *mtd, u_char *dat, u_char * #ifdef CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST static struct nand_ecclayout nand_davinci_4bit_layout_oobfirst = { -/* - * TI uses a different layout for 4K page deviecs. Since the - * eccpos filed can hold only a limited number of entries, adding - * support for 4K page will result in compilation warnings - * 4K Support will be added later - */ -#ifdef CONFIG_SYS_NAND_PAGE_2K +#if defined(CONFIG_SYS_NAND_PAGE_2K) .eccbytes = 40, .eccpos = { 24, 25, 26, 27, 28, @@ -200,6 +194,21 @@ static struct nand_ecclayout nand_davinci_4bit_layout_oobfirst = { .oobfree = { {.offset = 2, .length = 22, }, }, +#elif defined(CONFIG_SYS_NAND_PAGE_4K) + .eccbytes = 80, + .eccpos = { + 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, + 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, + 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, + 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, + 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, + 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, + 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, + 118, 119, 120, 121, 122, 123, 124, 125, 126, 127, + }, + .oobfree = { + {.offset = 2, .length = 46, }, + }, #endif }; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 50cb4aa..146e9bf 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -766,9 +766,6 @@ int board_nand_init(struct nand_chip *nand) nand->waitfunc = fsl_elbc_wait; /* set up nand options */ - /* redirect the pointer of bbt pattern to RAM */ - bbt_main_descr.pattern = bbt_pattern; - bbt_mirror_descr.pattern = mirror_pattern; nand->bbt_td = &bbt_main_descr; nand->bbt_md = &bbt_mirror_descr; @@ -815,7 +812,6 @@ int board_nand_init(struct nand_chip *nand) /* Large-page-specific setup */ if (or & OR_FCM_PGS) { priv->page_size = 1; - largepage_memorybased.pattern = scan_ff_pattern; nand->badblock_pattern = &largepage_memorybased; /* adjust ecc setup if needed */ diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 426bb95..7171bdd 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -893,6 +893,9 @@ static int nand_wait(struct mtd_info *mtd, struct nand_chip *this) * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read + * + * Not for syndrome calculating ecc controllers, which use a special oob layout */ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int page) @@ -903,10 +906,53 @@ static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, } /** + * nand_read_page_raw_syndrome - [Intern] read raw page data without ecc + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: buffer to store read data + * @page: page number to read + * + * We need a special oob layout and handling even when OOB isn't used. + */ +static int nand_read_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int page) +{ + int eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + uint8_t *oob = chip->oob_poi; + int steps, size; + + for (steps = chip->ecc.steps; steps > 0; steps--) { + chip->read_buf(mtd, buf, eccsize); + buf += eccsize; + + if (chip->ecc.prepad) { + chip->read_buf(mtd, oob, chip->ecc.prepad); + oob += chip->ecc.prepad; + } + + chip->read_buf(mtd, oob, eccbytes); + oob += eccbytes; + + if (chip->ecc.postpad) { + chip->read_buf(mtd, oob, chip->ecc.postpad); + oob += chip->ecc.postpad; + } + } + + size = mtd->oobsize - (oob - chip->oob_poi); + if (size) + chip->read_buf(mtd, oob, size); + + return 0; +} + +/** * nand_read_page_swecc - [REPLACABLE] software ecc based page read function * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read */ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int page) @@ -946,9 +992,9 @@ static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, * nand_read_subpage - [REPLACABLE] software ecc based sub-page read function * @mtd: mtd info structure * @chip: nand chip info structure - * @dataofs offset of requested data within the page - * @readlen data length - * @buf: buffer to store read data + * @data_offs: offset of requested data within the page + * @readlen: data length + * @bufpoi: buffer to store read data */ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi) { @@ -1015,7 +1061,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3 int stat; stat = chip->ecc.correct(mtd, p, &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]); - if (stat < 0) + if (stat == -1) mtd->ecc_stats.failed++; else mtd->ecc_stats.corrected += stat; @@ -1028,6 +1074,7 @@ static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip, uint3 * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * Not for syndrome calculating ecc controllers which need a special oob layout */ @@ -1059,7 +1106,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, int stat; stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); - if (stat == -1) + if (stat < 0) mtd->ecc_stats.failed++; else mtd->ecc_stats.corrected += stat; @@ -1072,6 +1119,7 @@ static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * Hardware ECC for large page chips, require OOB to be read first. * For this ECC mode, the write_page method is re-used from ECC_HW. @@ -1120,6 +1168,7 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: buffer to store read data + * @page: page number to read * * The hw generator calculates the error syndrome automatically. Therefor * we need a special oob layout and handling. @@ -1677,6 +1726,8 @@ static int nand_read_oob(struct mtd_info *mtd, loff_t from, * @mtd: mtd info structure * @chip: nand chip info structure * @buf: data buffer + * + * Not for syndrome calculating ecc controllers, which use a special oob layout */ static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf) @@ -1686,6 +1737,44 @@ static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, } /** + * nand_write_page_raw_syndrome - [Intern] raw page write function + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: data buffer + * + * We need a special oob layout and handling even when ECC isn't checked. + */ +static void nand_write_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf) +{ + int eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + uint8_t *oob = chip->oob_poi; + int steps, size; + + for (steps = chip->ecc.steps; steps > 0; steps--) { + chip->write_buf(mtd, buf, eccsize); + buf += eccsize; + + if (chip->ecc.prepad) { + chip->write_buf(mtd, oob, chip->ecc.prepad); + oob += chip->ecc.prepad; + } + + chip->read_buf(mtd, oob, eccbytes); + oob += eccbytes; + + if (chip->ecc.postpad) { + chip->write_buf(mtd, oob, chip->ecc.postpad); + oob += chip->ecc.postpad; + } + } + + size = mtd->oobsize - (oob - chip->oob_poi); + if (size) + chip->write_buf(mtd, oob, size); +} +/** * nand_write_page_swecc - [REPLACABLE] software ecc based page write function * @mtd: mtd info structure * @chip: nand chip info structure @@ -2211,13 +2300,15 @@ static int nand_erase(struct mtd_info *mtd, struct erase_info *instr) int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, int allowbbt) { - int page, len, status, pages_per_block, ret, chipnr; + int page, status, pages_per_block, ret, chipnr; struct nand_chip *chip = mtd->priv; - int rewrite_bbt[CONFIG_SYS_NAND_MAX_CHIPS]={0}; + loff_t rewrite_bbt[CONFIG_SYS_NAND_MAX_CHIPS] = {0}; unsigned int bbt_masked_page = 0xffffffff; + loff_t len; - MTDDEBUG (MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%08x, len = %i\n", - (unsigned int) instr->addr, (unsigned int) instr->len); + MTDDEBUG(MTD_DEBUG_LEVEL3, "nand_erase: start = 0x%012llx, " + "len = %llu\n", (unsigned long long) instr->addr, + (unsigned long long) instr->len); /* Start address must align on block boundary */ if (instr->addr & ((1 << chip->phys_erase_shift) - 1)) { @@ -2313,7 +2404,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_erase: " "Failed erase, page 0x%08x\n", page); instr->state = MTD_ERASE_FAILED; - instr->fail_addr = (page << chip->page_shift); + instr->fail_addr = ((loff_t)page << chip->page_shift); goto erase_exit; } @@ -2323,7 +2414,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, */ if (bbt_masked_page != 0xffffffff && (page & BBT_PAGE_MASK) == bbt_masked_page) - rewrite_bbt[chipnr] = (page << chip->page_shift); + rewrite_bbt[chipnr] = + ((loff_t)page << chip->page_shift); /* Increment page address and decrement length */ len -= (1 << chip->phys_erase_shift); @@ -2370,8 +2462,8 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, continue; /* update the BBT for chip */ MTDDEBUG (MTD_DEBUG_LEVEL0, "nand_erase_nand: nand_update_bbt " - "(%d:0x%0x 0x%0x)\n", chipnr, rewrite_bbt[chipnr], - chip->bbt_td->pages[chipnr]); + "(%d:0x%0llx 0x%0x)\n", chipnr, rewrite_bbt[chipnr], + chip->bbt_td->pages[chipnr]); nand_update_bbt(mtd, rewrite_bbt[chipnr]); } @@ -2566,7 +2658,7 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, if (!mtd->name) mtd->name = type->name; - chip->chipsize = type->chipsize << 20; + chip->chipsize = (uint64_t)type->chipsize << 20; /* Newer devices have all the information in additional id bytes */ if (!type->pagesize) { @@ -2624,7 +2716,10 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, chip->bbt_erase_shift = chip->phys_erase_shift = ffs(mtd->erasesize) - 1; - chip->chip_shift = ffs(chip->chipsize) - 1; + if (chip->chipsize & 0xffffffff) + chip->chip_shift = ffs((unsigned)chip->chipsize) - 1; + else + chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32)) + 31; /* Set the bad block position */ chip->badblockpos = mtd->writesize > 512 ? @@ -2722,7 +2817,6 @@ int nand_scan_ident(struct mtd_info *mtd, int maxchips) /** * nand_scan_tail - [NAND Interface] Scan for the NAND device * @mtd: MTD device structure - * @maxchips: Number of chips to scan for * * This is the second phase of the normal nand_scan() function. It * fills out all the uninitialized function pointers with the defaults @@ -2761,7 +2855,6 @@ int nand_scan_tail(struct mtd_info *mtd) default: printk(KERN_WARNING "No oob scheme defined for " "oobsize %d\n", mtd->oobsize); -/* BUG(); */ } } @@ -2772,10 +2865,6 @@ int nand_scan_tail(struct mtd_info *mtd) * check ECC mode, default to software if 3byte/512byte hardware ECC is * selected and we have 256 byte pagesize fallback to software ECC */ - if (!chip->ecc.read_page_raw) - chip->ecc.read_page_raw = nand_read_page_raw; - if (!chip->ecc.write_page_raw) - chip->ecc.write_page_raw = nand_write_page_raw; switch (chip->ecc.mode) { case NAND_ECC_HW_OOB_FIRST: @@ -2795,6 +2884,10 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.read_page = nand_read_page_hwecc; if (!chip->ecc.write_page) chip->ecc.write_page = nand_write_page_hwecc; + if (!chip->ecc.read_page_raw) + chip->ecc.read_page_raw = nand_read_page_raw; + if (!chip->ecc.write_page_raw) + chip->ecc.write_page_raw = nand_write_page_raw; if (!chip->ecc.read_oob) chip->ecc.read_oob = nand_read_oob_std; if (!chip->ecc.write_oob) @@ -2816,6 +2909,10 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.read_page = nand_read_page_syndrome; if (!chip->ecc.write_page) chip->ecc.write_page = nand_write_page_syndrome; + if (!chip->ecc.read_page_raw) + chip->ecc.read_page_raw = nand_read_page_raw_syndrome; + if (!chip->ecc.write_page_raw) + chip->ecc.write_page_raw = nand_write_page_raw_syndrome; if (!chip->ecc.read_oob) chip->ecc.read_oob = nand_read_oob_syndrome; if (!chip->ecc.write_oob) @@ -2834,6 +2931,8 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.read_page = nand_read_page_swecc; chip->ecc.read_subpage = nand_read_subpage; chip->ecc.write_page = nand_write_page_swecc; + chip->ecc.read_page_raw = nand_read_page_raw; + chip->ecc.write_page_raw = nand_write_page_raw; chip->ecc.read_oob = nand_read_oob_std; chip->ecc.write_oob = nand_write_oob_std; chip->ecc.size = 256; @@ -2846,6 +2945,8 @@ int nand_scan_tail(struct mtd_info *mtd) chip->ecc.read_page = nand_read_page_raw; chip->ecc.write_page = nand_write_page_raw; chip->ecc.read_oob = nand_read_oob_std; + chip->ecc.read_page_raw = nand_read_page_raw; + chip->ecc.write_page_raw = nand_write_page_raw; chip->ecc.write_oob = nand_write_oob_std; chip->ecc.size = mtd->writesize; chip->ecc.bytes = 0; @@ -2862,7 +2963,8 @@ int nand_scan_tail(struct mtd_info *mtd) * the out of band area */ chip->ecc.layout->oobavail = 0; - for (i = 0; chip->ecc.layout->oobfree[i].length; i++) + for (i = 0; chip->ecc.layout->oobfree[i].length + && i < ARRAY_SIZE(chip->ecc.layout->oobfree); i++) chip->ecc.layout->oobavail += chip->ecc.layout->oobfree[i].length; mtd->oobavail = chip->ecc.layout->oobavail; @@ -2890,6 +2992,7 @@ int nand_scan_tail(struct mtd_info *mtd) break; case 4: case 8: + case 16: mtd->subpage_sft = 2; break; } diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index d68a315f..2fe68ab 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -182,16 +182,19 @@ static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num, if (tmp == msk) continue; if (reserved_block_code && (tmp == reserved_block_code)) { - printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%08x\n", - ((offs << 2) + (act >> 1)) << this->bbt_erase_shift); + printk(KERN_DEBUG "nand_read_bbt: Reserved block at 0x%012llx\n", + (loff_t)((offs << 2) + + (act >> 1)) << + this->bbt_erase_shift); this->bbt[offs + (act >> 3)] |= 0x2 << (act & 0x06); mtd->ecc_stats.bbtblocks++; continue; } /* Leave it for now, if its matured we can move this * message to MTD_DEBUG_LEVEL0 */ - printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%08x\n", - ((offs << 2) + (act >> 1)) << this->bbt_erase_shift); + printk(KERN_DEBUG "nand_read_bbt: Bad block at 0x%012llx\n", + (loff_t)((offs << 2) + (act >> 1)) << + this->bbt_erase_shift); /* Factory marked bad or worn out ? */ if (tmp == 0) this->bbt[offs + (act >> 3)] |= 0x3 << (act & 0x06); @@ -295,8 +298,8 @@ static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf, /* Read the primary version, if available */ if (td->options & NAND_BBT_VERSION) { - scan_read_raw(mtd, buf, td->pages[0] << this->page_shift, - mtd->writesize); + scan_read_raw(mtd, buf, (loff_t)td->pages[0] << + this->page_shift, mtd->writesize); td->version[0] = buf[mtd->writesize + td->veroffs]; printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", td->pages[0], td->version[0]); @@ -304,8 +307,8 @@ static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf, /* Read the mirror version, if available */ if (md && (md->options & NAND_BBT_VERSION)) { - scan_read_raw(mtd, buf, md->pages[0] << this->page_shift, - mtd->writesize); + scan_read_raw(mtd, buf, (loff_t)md->pages[0] << + this->page_shift, mtd->writesize); md->version[0] = buf[mtd->writesize + md->veroffs]; printk(KERN_DEBUG "Bad block table at page %d, version 0x%02X\n", md->pages[0], md->version[0]); @@ -422,7 +425,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, numblocks = this->chipsize >> (this->bbt_erase_shift - 1); startblock = chip * numblocks; numblocks += startblock; - from = startblock << (this->bbt_erase_shift - 1); + from = (loff_t)startblock << (this->bbt_erase_shift - 1); } for (i = startblock; i < numblocks;) { @@ -440,8 +443,8 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, if (ret) { this->bbt[i >> 3] |= 0x03 << (i & 0x6); MTDDEBUG (MTD_DEBUG_LEVEL0, - "Bad eraseblock %d at 0x%08x\n", - i >> 1, (unsigned int)from); + "Bad eraseblock %d at 0x%012llx\n", + i >> 1, (unsigned long long)from); mtd->ecc_stats.badblocks++; } @@ -507,7 +510,7 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr for (block = 0; block < td->maxblocks; block++) { int actblock = startblock + dir * block; - loff_t offs = actblock << this->bbt_erase_shift; + loff_t offs = (loff_t)actblock << this->bbt_erase_shift; /* Read first page */ scan_read_raw(mtd, buf, offs, mtd->writesize); @@ -731,7 +734,7 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf, memset(&einfo, 0, sizeof(einfo)); einfo.mtd = mtd; - einfo.addr = (unsigned long)to; + einfo.addr = to; einfo.len = 1 << this->bbt_erase_shift; res = nand_erase_nand(mtd, &einfo, 1); if (res < 0) @@ -741,8 +744,9 @@ static int write_bbt(struct mtd_info *mtd, uint8_t *buf, if (res < 0) goto outerr; - printk(KERN_DEBUG "Bad block table written to 0x%08x, version " - "0x%02X\n", (unsigned int)to, td->version[chip]); + printk(KERN_DEBUG "Bad block table written to 0x%012llx, " + "version 0x%02X\n", (unsigned long long)to, + td->version[chip]); /* Mark it as used */ td->pages[chip] = page; @@ -922,7 +926,8 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td) newval = oldval | (0x2 << (block & 0x06)); this->bbt[(block >> 3)] = newval; if ((oldval != newval) && td->reserved_block_code) - nand_update_bbt(mtd, block << (this->bbt_erase_shift - 1)); + nand_update_bbt(mtd, (loff_t)block << + (this->bbt_erase_shift - 1)); continue; } update = 0; @@ -943,7 +948,8 @@ static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td) new ones have been marked, then we need to update the stored bbts. This should only happen once. */ if (update && td->reserved_block_code) - nand_update_bbt(mtd, (block - 2) << (this->bbt_erase_shift - 1)); + nand_update_bbt(mtd, (loff_t)(block - 2) << + (this->bbt_erase_shift - 1)); } } @@ -1039,7 +1045,6 @@ int nand_update_bbt(struct mtd_info *mtd, loff_t offs) if (!this->bbt || !td) return -EINVAL; - len = mtd->size >> (this->bbt_erase_shift + 2); /* Allocate a temporary buffer for one eraseblock incl. oob */ len = (1 << this->bbt_erase_shift); len += (len >> this->page_shift) * mtd->oobsize; diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index 61bf7e6..29c42f7 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -41,10 +41,6 @@ #include <nand.h> #include <jffs2/jffs2.h> -#if !defined(CONFIG_SYS_64BIT_VSPRINTF) -#warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output! -#endif - typedef struct erase_info erase_info_t; typedef struct mtd_info mtd_info_t; diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c index f2f3e72..a27d47e 100644 --- a/drivers/mtd/nand/s3c2410_nand.c +++ b/drivers/mtd/nand/s3c2410_nand.c @@ -21,7 +21,7 @@ #include <common.h> #include <nand.h> -#include <s3c2410.h> +#include <asm/arch/s3c24x0_cpu.h> #include <asm/io.h> #define S3C2410_NFCONF_EN (1<<15) @@ -36,6 +36,21 @@ #define S3C2410_ADDR_NALE 4 #define S3C2410_ADDR_NCLE 8 +#ifdef CONFIG_NAND_SPL + +/* in the early stage of NAND flash booting, printf() is not available */ +#define printf(fmt, args...) + +static void nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + int i; + struct nand_chip *this = mtd->priv; + + for (i = 0; i < len; i++) + buf[i] = readb(this->IO_ADDR_R); +} +#endif + static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { struct nand_chip *chip = mtd->priv; @@ -83,9 +98,10 @@ void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode) static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) { - ecc_code[0] = NFECC0; - ecc_code[1] = NFECC1; - ecc_code[2] = NFECC2; + struct s3c2410_nand *nand = s3c2410_get_base_nand(); + ecc_code[0] = readb(&nand->NFECC); + ecc_code[1] = readb(&nand->NFECC + 1); + ecc_code[2] = readb(&nand->NFECC + 2); debugX(1, "s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n", mtd , ecc_code[0], ecc_code[1], ecc_code[2]); @@ -130,8 +146,13 @@ int board_nand_init(struct nand_chip *nand) /* initialize nand_chip data structure */ nand->IO_ADDR_R = nand->IO_ADDR_W = (void *)&nand_reg->NFDATA; + nand->select_chip = NULL; + /* read_buf and write_buf are default */ /* read_byte and write_byte are default */ +#ifdef CONFIG_NAND_SPL + nand->read_buf = nand_read_buf; +#endif /* hwcontrol always must be implemented */ nand->cmd_ctrl = s3c2410_hwcontrol; @@ -142,7 +163,9 @@ int board_nand_init(struct nand_chip *nand) nand->ecc.hwctl = s3c2410_nand_enable_hwecc; nand->ecc.calculate = s3c2410_nand_calculate_ecc; nand->ecc.correct = s3c2410_nand_correct_data; - nand->ecc.mode = NAND_ECC_HW3_512; + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; + nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; #else nand->ecc.mode = NAND_ECC_SOFT; #endif diff --git a/drivers/mtd/nand/s3c64xx.c b/drivers/mtd/nand/s3c64xx.c index edaf55a..084e475 100644 --- a/drivers/mtd/nand/s3c64xx.c +++ b/drivers/mtd/nand/s3c64xx.c @@ -28,7 +28,7 @@ #include <common.h> #include <nand.h> -#include <s3c6400.h> +#include <asm/arch/s3c6400.h> #include <asm/io.h> #include <asm/errno.h> diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 368fa6e..f9273ab 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -9,6 +9,11 @@ * auto-placement support, read-while load support, various fixes * Copyright (C) Nokia Corporation, 2007 * + * Rohit Hagargundgi <h.rohit at samsung.com>, + * Amul Kumar Saha <amul.saha@samsung.com>: + * Flex-OneNAND support + * Copyright (C) Samsung Electronics, 2009 + * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. @@ -24,7 +29,7 @@ #include <malloc.h> /* It should access 16-bit instead of 8-bit */ -static inline void *memcpy_16(void *dst, const void *src, unsigned int len) +static void *memcpy_16(void *dst, const void *src, unsigned int len) { void *ret = dst; short *d = dst; @@ -37,6 +42,27 @@ static inline void *memcpy_16(void *dst, const void *src, unsigned int len) } /** + * onenand_oob_128 - oob info for Flex-Onenand with 4KB page + * For now, we expose only 64 out of 80 ecc bytes + */ +static struct nand_ecclayout onenand_oob_128 = { + .eccbytes = 64, + .eccpos = { + 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, + 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, + 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, + 102, 103, 104, 105 + }, + .oobfree = { + {2, 4}, {18, 4}, {34, 4}, {50, 4}, + {66, 4}, {82, 4}, {98, 4}, {114, 4} + } +}; + +/** * onenand_oob_64 - oob info for large (2KB) page */ static struct nand_ecclayout onenand_oob_64 = { @@ -74,6 +100,14 @@ static const unsigned char ffchars[] = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 48 */ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 64 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 80 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 96 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 112 */ + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 128 */ }; /** @@ -180,6 +214,85 @@ static int onenand_buffer_address(int dataram1, int sectors, int count) } /** + * flexonenand_block - Return block number for flash address + * @param this - OneNAND device structure + * @param addr - Address for which block number is needed + */ +static unsigned int flexonenand_block(struct onenand_chip *this, loff_t addr) +{ + unsigned int boundary, blk, die = 0; + + if (ONENAND_IS_DDP(this) && addr >= this->diesize[0]) { + die = 1; + addr -= this->diesize[0]; + } + + boundary = this->boundary[die]; + + blk = addr >> (this->erase_shift - 1); + if (blk > boundary) + blk = (blk + boundary + 1) >> 1; + + blk += die ? this->density_mask : 0; + return blk; +} + +unsigned int onenand_block(struct onenand_chip *this, loff_t addr) +{ + if (!FLEXONENAND(this)) + return addr >> this->erase_shift; + return flexonenand_block(this, addr); +} + +/** + * flexonenand_addr - Return address of the block + * @this: OneNAND device structure + * @block: Block number on Flex-OneNAND + * + * Return address of the block + */ +static loff_t flexonenand_addr(struct onenand_chip *this, int block) +{ + loff_t ofs = 0; + int die = 0, boundary; + + if (ONENAND_IS_DDP(this) && block >= this->density_mask) { + block -= this->density_mask; + die = 1; + ofs = this->diesize[0]; + } + + boundary = this->boundary[die]; + ofs += (loff_t) block << (this->erase_shift - 1); + if (block > (boundary + 1)) + ofs += (loff_t) (block - boundary - 1) + << (this->erase_shift - 1); + return ofs; +} + +loff_t onenand_addr(struct onenand_chip *this, int block) +{ + if (!FLEXONENAND(this)) + return (loff_t) block << this->erase_shift; + return flexonenand_addr(this, block); +} + +/** + * flexonenand_region - [Flex-OneNAND] Return erase region of addr + * @param mtd MTD device structure + * @param addr address whose erase region needs to be identified + */ +int flexonenand_region(struct mtd_info *mtd, loff_t addr) +{ + int i; + + for (i = 0; i < mtd->numeraseregions; i++) + if (addr < mtd->eraseregions[i].offset) + break; + return i - 1; +} + +/** * onenand_get_density - [DEFAULT] Get OneNAND density * @param dev_id OneNAND device ID * @@ -205,10 +318,11 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, size_t len) { struct onenand_chip *this = mtd->priv; - int value, readcmd = 0; + int value; int block, page; + /* Now we use page size operation */ - int sectors = 4, count = 4; + int sectors = 0, count = 0; /* Address translation */ switch (cmd) { @@ -220,15 +334,28 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, page = -1; break; + case FLEXONENAND_CMD_PI_ACCESS: + /* addr contains die index */ + block = addr * this->density_mask; + page = -1; + break; + case ONENAND_CMD_ERASE: case ONENAND_CMD_BUFFERRAM: - block = (int)(addr >> this->erase_shift); + block = onenand_block(this, addr); page = -1; break; + case FLEXONENAND_CMD_READ_PI: + cmd = ONENAND_CMD_READ; + block = addr * this->density_mask; + page = 0; + break; + default: - block = (int)(addr >> this->erase_shift); - page = (int)(addr >> this->page_shift); + block = onenand_block(this, addr); + page = (int) (addr + - onenand_addr(this, block)) >> this->page_shift; page &= this->page_mask; break; } @@ -240,8 +367,11 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); - /* Switch to the next data buffer */ - ONENAND_SET_NEXT_BUFFERRAM(this); + if (ONENAND_IS_MLC(this)) + ONENAND_SET_BUFFERRAM0(this); + else + /* Switch to the next data buffer */ + ONENAND_SET_NEXT_BUFFERRAM(this); return 0; } @@ -252,7 +382,7 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); - /* Write 'DFS, FBA' of Flash */ + /* Select DataRAM for DDP */ value = onenand_bufferram_address(this, block); this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); @@ -262,10 +392,14 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, int dataram; switch (cmd) { + case FLEXONENAND_CMD_RECOVER_LSB: case ONENAND_CMD_READ: case ONENAND_CMD_READOOB: - dataram = ONENAND_SET_NEXT_BUFFERRAM(this); - readcmd = 1; + if (ONENAND_IS_MLC(this)) + dataram = ONENAND_SET_BUFFERRAM0(this); + else + dataram = ONENAND_SET_NEXT_BUFFERRAM(this); + break; default: @@ -292,6 +426,29 @@ static int onenand_command(struct mtd_info *mtd, int cmd, loff_t addr, } /** + * onenand_read_ecc - return ecc status + * @param this onenand chip structure + */ +static int onenand_read_ecc(struct onenand_chip *this) +{ + int ecc, i; + + if (!FLEXONENAND(this)) + return this->read_word(this->base + ONENAND_REG_ECC_STATUS); + + for (i = 0; i < 4; i++) { + ecc = this->read_word(this->base + + ((ONENAND_REG_ECC_STATUS + i) << 1)); + if (likely(!ecc)) + continue; + if (ecc & FLEXONENAND_UNCORRECTABLE_ERROR) + return ONENAND_ECC_2BIT_ALL; + } + + return 0; +} + +/** * onenand_wait - [DEFAULT] wait until the command is done * @param mtd MTD device structure * @param state state to select the max. timeout value @@ -305,7 +462,7 @@ static int onenand_wait(struct mtd_info *mtd, int state) struct onenand_chip *this = mtd->priv; unsigned int flags = ONENAND_INT_MASTER; unsigned int interrupt = 0; - unsigned int ctrl, ecc; + unsigned int ctrl; while (1) { interrupt = this->read_word(this->base + ONENAND_REG_INTERRUPT); @@ -315,6 +472,14 @@ static int onenand_wait(struct mtd_info *mtd, int state) ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS); + if (interrupt & ONENAND_INT_READ) { + int ecc = onenand_read_ecc(this); + if (ecc & ONENAND_ECC_2BIT_ALL) { + printk("onenand_wait: ECC error = 0x%04x\n", ecc); + return -EBADMSG; + } + } + if (ctrl & ONENAND_CTRL_ERROR) { printk("onenand_wait: controller error = 0x%04x\n", ctrl); if (ctrl & ONENAND_CTRL_LOCK) @@ -324,14 +489,6 @@ static int onenand_wait(struct mtd_info *mtd, int state) return -EIO; } - if (interrupt & ONENAND_INT_READ) { - ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS); - if (ecc & ONENAND_ECC_2BIT_ALL) { - MTDDEBUG (MTD_DEBUG_LEVEL0, - "onenand_wait: ECC error = 0x%04x\n", ecc); - return -EBADMSG; - } - } return 0; } @@ -499,7 +656,7 @@ static int onenand_check_bufferram(struct mtd_info *mtd, loff_t addr) if (found && ONENAND_IS_DDP(this)) { /* Select DataRAM for DDP */ - int block = (int) (addr >> this->erase_shift); + int block = onenand_block(this, addr); int value = onenand_bufferram_address(this, block); this->write_word(value, this->base + ONENAND_REG_START_ADDRESS2); } @@ -632,6 +789,45 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, } /** + * onenand_recover_lsb - [Flex-OneNAND] Recover LSB page data + * @param mtd MTD device structure + * @param addr address to recover + * @param status return value from onenand_wait + * + * MLC NAND Flash cell has paired pages - LSB page and MSB page. LSB page has + * lower page address and MSB page has higher page address in paired pages. + * If power off occurs during MSB page program, the paired LSB page data can + * become corrupt. LSB page recovery read is a way to read LSB page though page + * data are corrupted. When uncorrectable error occurs as a result of LSB page + * read after power up, issue LSB page recovery read. + */ +static int onenand_recover_lsb(struct mtd_info *mtd, loff_t addr, int status) +{ + struct onenand_chip *this = mtd->priv; + int i; + + /* Recovery is only for Flex-OneNAND */ + if (!FLEXONENAND(this)) + return status; + + /* check if we failed due to uncorrectable error */ + if (status != -EBADMSG && status != ONENAND_BBT_READ_ECC_ERROR) + return status; + + /* check if address lies in MLC region */ + i = flexonenand_region(mtd, addr); + if (mtd->eraseregions[i].erasesize < (1 << this->erase_shift)) + return status; + + printk("onenand_recover_lsb:" + "Attempting to recover from uncorrectable read\n"); + + /* Issue the LSB page recovery command */ + this->command(mtd, FLEXONENAND_CMD_RECOVER_LSB, addr, this->writesize); + return this->wait(mtd, FL_READING); +} + +/** * onenand_read_ops_nolock - [OneNAND Interface] OneNAND read main and/or out-of-band * @param mtd MTD device structure * @param from offset to read from @@ -673,6 +869,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from, stats = mtd->ecc_stats; /* Read-while-load method */ + /* Note: We can't use this feature in MLC */ /* Do first load to bufferRAM */ if (read < len) { @@ -680,6 +877,8 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from, this->main_buf = buf; this->command(mtd, ONENAND_CMD_READ, from, writesize); ret = this->wait(mtd, FL_READING); + if (unlikely(ret)) + ret = onenand_recover_lsb(mtd, from, ret); onenand_update_bufferram(mtd, from, !ret); if (ret == -EBADMSG) ret = 0; @@ -694,7 +893,7 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from, while (!ret) { /* If there is more to load then start next load */ from += thislen; - if (read + thislen < len) { + if (!ONENAND_IS_MLC(this) && read + thislen < len) { this->main_buf = buf + thislen; this->command(mtd, ONENAND_CMD_READ, from, writesize); /* @@ -728,6 +927,16 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from, oobcolumn = 0; } + if (ONENAND_IS_MLC(this) && (read + thislen < len)) { + this->command(mtd, ONENAND_CMD_READ, from, writesize); + ret = this->wait(mtd, FL_READING); + if (unlikely(ret)) + ret = onenand_recover_lsb(mtd, from, ret); + onenand_update_bufferram(mtd, from, !ret); + if (ret == -EBADMSG) + ret = 0; + } + /* See if we are done */ read += thislen; if (read == len) @@ -735,16 +944,19 @@ static int onenand_read_ops_nolock(struct mtd_info *mtd, loff_t from, /* Set up for next read from bufferRAM */ if (unlikely(boundary)) this->write_word(ONENAND_DDP_CHIP1, this->base + ONENAND_REG_START_ADDRESS2); - ONENAND_SET_NEXT_BUFFERRAM(this); + if (!ONENAND_IS_MLC(this)) + ONENAND_SET_NEXT_BUFFERRAM(this); buf += thislen; thislen = min_t(int, writesize, len - read); column = 0; - /* Now wait for load */ - ret = this->wait(mtd, FL_READING); - onenand_update_bufferram(mtd, from, !ret); - if (ret == -EBADMSG) - ret = 0; + if (!ONENAND_IS_MLC(this)) { + /* Now wait for load */ + ret = this->wait(mtd, FL_READING); + onenand_update_bufferram(mtd, from, !ret); + if (ret == -EBADMSG) + ret = 0; + } } /* @@ -781,7 +993,7 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from, size_t len = ops->ooblen; mtd_oob_mode_t mode = ops->mode; u_char *buf = ops->oobbuf; - int ret = 0; + int ret = 0, readcmd; from += ops->ooboffs; @@ -812,16 +1024,21 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from, stats = mtd->ecc_stats; + readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; + while (read < len) { thislen = oobsize - column; thislen = min_t(int, thislen, len); this->spare_buf = buf; - this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize); + this->command(mtd, readcmd, from, mtd->oobsize); onenand_update_bufferram(mtd, from, 0); ret = this->wait(mtd, FL_READING); + if (unlikely(ret)) + ret = onenand_recover_lsb(mtd, from, ret); + if (ret && ret != -EBADMSG) { printk(KERN_ERR "onenand_read_oob_nolock: read failed = 0x%x\n", ret); break; @@ -945,9 +1162,12 @@ static int onenand_bbt_wait(struct mtd_info *mtd, int state) ctrl = this->read_word(this->base + ONENAND_REG_CTRL_STATUS); if (interrupt & ONENAND_INT_READ) { - int ecc = this->read_word(this->base + ONENAND_REG_ECC_STATUS); - if (ecc & ONENAND_ECC_2BIT_ALL) + int ecc = onenand_read_ecc(this); + if (ecc & ONENAND_ECC_2BIT_ALL) { + printk(KERN_INFO "onenand_bbt_wait: ecc error = 0x%04x" + ", controller = 0x%04x\n", ecc, ctrl); return ONENAND_BBT_READ_ERROR; + } } else { printk(KERN_ERR "onenand_bbt_wait: read timeout!" "ctrl=0x%04x intr=0x%04x\n", ctrl, interrupt); @@ -976,12 +1196,14 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, { struct onenand_chip *this = mtd->priv; int read = 0, thislen, column; - int ret = 0; + int ret = 0, readcmd; size_t len = ops->ooblen; u_char *buf = ops->oobbuf; MTDDEBUG(MTD_DEBUG_LEVEL3, "onenand_bbt_read_oob: from = 0x%08x, len = %zi\n", (unsigned int) from, len); + readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; + /* Initialize return value */ ops->oobretlen = 0; @@ -1002,11 +1224,14 @@ int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, thislen = min_t(int, thislen, len); this->spare_buf = buf; - this->command(mtd, ONENAND_CMD_READOOB, from, mtd->oobsize); + this->command(mtd, readcmd, from, mtd->oobsize); onenand_update_bufferram(mtd, from, 0); ret = this->bbt_wait(mtd, FL_READING); + if (unlikely(ret)) + ret = onenand_recover_lsb(mtd, from, ret); + if (ret) break; @@ -1044,9 +1269,11 @@ static int onenand_verify_oob(struct mtd_info *mtd, const u_char *buf, loff_t to { struct onenand_chip *this = mtd->priv; u_char *oob_buf = this->oob_buf; - int status, i; + int status, i, readcmd; - this->command(mtd, ONENAND_CMD_READOOB, to, mtd->oobsize); + readcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_READ : ONENAND_CMD_READOOB; + + this->command(mtd, readcmd, to, mtd->oobsize); onenand_update_bufferram(mtd, to, 0); status = this->wait(mtd, FL_READING); if (status) @@ -1291,7 +1518,7 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to, { struct onenand_chip *this = mtd->priv; int column, ret = 0, oobsize; - int written = 0; + int written = 0, oobcmd; u_char *oobbuf; size_t len = ops->ooblen; const u_char *buf = ops->oobbuf; @@ -1333,6 +1560,8 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to, oobbuf = this->oob_buf; + oobcmd = ONENAND_IS_MLC(this) ? ONENAND_CMD_PROG : ONENAND_CMD_PROGOOB; + /* Loop until all data write */ while (written < len) { int thislen = min_t(int, oobsize, len - written); @@ -1348,7 +1577,14 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to, memcpy(oobbuf + column, buf, thislen); this->write_bufferram(mtd, 0, ONENAND_SPARERAM, oobbuf, 0, mtd->oobsize); - this->command(mtd, ONENAND_CMD_PROGOOB, to, mtd->oobsize); + if (ONENAND_IS_MLC(this)) { + /* Set main area of DataRAM to 0xff*/ + memset(this->page_buf, 0xff, mtd->writesize); + this->write_bufferram(mtd, 0, ONENAND_DATARAM, + this->page_buf, 0, mtd->writesize); + } + + this->command(mtd, oobcmd, to, mtd->oobsize); onenand_update_bufferram(mtd, to, 0); if (ONENAND_IS_2PLANE(this)) { @@ -1475,34 +1711,54 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) { struct onenand_chip *this = mtd->priv; unsigned int block_size; - loff_t addr; - int len; - int ret = 0; - - MTDDEBUG (MTD_DEBUG_LEVEL3, - "onenand_erase: start = 0x%08x, len = %i\n", - (unsigned int)instr->addr, (unsigned int)instr->len); + loff_t addr = instr->addr; + unsigned int len = instr->len; + int ret = 0, i; + struct mtd_erase_region_info *region = NULL; + unsigned int region_end = 0; - block_size = (1 << this->erase_shift); + MTDDEBUG(MTD_DEBUG_LEVEL3, "onenand_erase: start = 0x%08x, len = %i\n", + (unsigned int) addr, len); - /* Start address must align on block boundary */ - if (unlikely(instr->addr & (block_size - 1))) { - MTDDEBUG (MTD_DEBUG_LEVEL0, - "onenand_erase: Unaligned address\n"); + /* Do not allow erase past end of device */ + if (unlikely((len + addr) > mtd->size)) { + MTDDEBUG(MTD_DEBUG_LEVEL0, "onenand_erase:" + "Erase past end of device\n"); return -EINVAL; } - /* Length must align on block boundary */ - if (unlikely(instr->len & (block_size - 1))) { - MTDDEBUG (MTD_DEBUG_LEVEL0, - "onenand_erase: Length not block aligned\n"); - return -EINVAL; + if (FLEXONENAND(this)) { + /* Find the eraseregion of this address */ + i = flexonenand_region(mtd, addr); + region = &mtd->eraseregions[i]; + + block_size = region->erasesize; + region_end = region->offset + + region->erasesize * region->numblocks; + + /* Start address within region must align on block boundary. + * Erase region's start offset is always block start address. + */ + if (unlikely((addr - region->offset) & (block_size - 1))) { + MTDDEBUG(MTD_DEBUG_LEVEL0, "onenand_erase:" + " Unaligned address\n"); + return -EINVAL; + } + } else { + block_size = 1 << this->erase_shift; + + /* Start address must align on block boundary */ + if (unlikely(addr & (block_size - 1))) { + MTDDEBUG(MTD_DEBUG_LEVEL0, "onenand_erase:" + "Unaligned address\n"); + return -EINVAL; + } } - /* Do not allow erase past end of device */ - if (unlikely((instr->len + instr->addr) > mtd->size)) { + /* Length must align on block boundary */ + if (unlikely(len & (block_size - 1))) { MTDDEBUG (MTD_DEBUG_LEVEL0, - "onenand_erase: Erase past end of device\n"); + "onenand_erase: Length not block aligned\n"); return -EINVAL; } @@ -1512,9 +1768,6 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) onenand_get_device(mtd, FL_ERASING); /* Loop throught the pages */ - len = instr->len; - addr = instr->addr; - instr->state = MTD_ERASING; while (len) { @@ -1541,14 +1794,7 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) else MTDDEBUG (MTD_DEBUG_LEVEL0, "onenand_erase: " "Failed erase, block %d\n", - (unsigned)(addr >> this->erase_shift)); - if (ret == -EPERM) - printk("onenand_erase: " - "Device is write protected!!!\n"); - else - printk("onenand_erase: " - "Failed erase, block %d\n", - (unsigned)(addr >> this->erase_shift)); + onenand_block(this, addr)); instr->state = MTD_ERASE_FAILED; instr->fail_addr = addr; @@ -1557,6 +1803,23 @@ int onenand_erase(struct mtd_info *mtd, struct erase_info *instr) len -= block_size; addr += block_size; + + if (addr == region_end) { + if (!len) + break; + region++; + + block_size = region->erasesize; + region_end = region->offset + + region->erasesize * region->numblocks; + + if (len & (block_size - 1)) { + /* This has been checked at MTD + * partitioning level. */ + printk("onenand_erase: Unaligned address\n"); + goto erase_exit; + } + } } instr->state = MTD_ERASE_DONE; @@ -1634,7 +1897,7 @@ static int onenand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) int block; /* Get block number */ - block = ((int) ofs) >> bbm->bbt_erase_shift; + block = onenand_block(this, ofs); if (bbm->bbt) bbm->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); @@ -1682,8 +1945,8 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int int start, end, block, value, status; int wp_status_mask; - start = ofs >> this->erase_shift; - end = len >> this->erase_shift; + start = onenand_block(this, ofs); + end = onenand_block(this, ofs + len); if (cmd == ONENAND_CMD_LOCK) wp_status_mask = ONENAND_WP_LS; @@ -1718,7 +1981,7 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int } /* Block lock scheme */ - for (block = start; block < start + end; block++) { + for (block = start; block < end; block++) { /* Set block address */ value = onenand_block_address(this, block); this->write_word(value, this->base + ONENAND_REG_START_ADDRESS1); @@ -1831,7 +2094,7 @@ static void onenand_unlock_all(struct mtd_info *mtd) { struct onenand_chip *this = mtd->priv; loff_t ofs = 0; - size_t len = this->chipsize; + size_t len = mtd->size; if (this->options & ONENAND_HAS_UNLOCK_ALL) { /* Set start block address */ @@ -1847,14 +2110,12 @@ static void onenand_unlock_all(struct mtd_info *mtd) & ONENAND_CTRL_ONGO) continue; - return; - /* Check lock status */ if (onenand_check_lock_status(this)) return; /* Workaround for all block unlock in DDP */ - if (ONENAND_IS_DDP(this)) { + if (ONENAND_IS_DDP(this) && !FLEXONENAND(this)) { /* All blocks on another chip */ ofs = this->chipsize >> 1; len = this->chipsize >> 1; @@ -1906,6 +2167,14 @@ static void onenand_check_features(struct mtd_info *mtd) break; } + if (ONENAND_IS_MLC(this)) + this->options &= ~ONENAND_HAS_2PLANE; + + if (FLEXONENAND(this)) { + this->options &= ~ONENAND_HAS_CONT_LOCK; + this->options |= ONENAND_HAS_UNLOCK_ALL; + } + if (this->options & ONENAND_HAS_CONT_LOCK) printk(KERN_DEBUG "Lock scheme is Continuous Lock\n"); if (this->options & ONENAND_HAS_UNLOCK_ALL) @@ -1922,16 +2191,18 @@ static void onenand_check_features(struct mtd_info *mtd) */ char *onenand_print_device_info(int device, int version) { - int vcc, demuxed, ddp, density; + int vcc, demuxed, ddp, density, flexonenand; char *dev_info = malloc(80); char *p = dev_info; vcc = device & ONENAND_DEVICE_VCC_MASK; demuxed = device & ONENAND_DEVICE_IS_DEMUX; ddp = device & ONENAND_DEVICE_IS_DDP; - density = device >> ONENAND_DEVICE_DENSITY_SHIFT; - p += sprintf(dev_info, "%sOneNAND%s %dMB %sV 16-bit (0x%02x)", + density = onenand_get_density(device); + flexonenand = device & DEVICE_IS_FLEXONENAND; + p += sprintf(dev_info, "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)", demuxed ? "" : "Muxed ", + flexonenand ? "Flex-" : "", ddp ? "(DDP)" : "", (16 << density), vcc ? "2.65/3.3" : "1.8", device); @@ -1957,7 +2228,7 @@ static int onenand_check_maf(int manuf) char *name; int i; - for (i = 0; size; i++) + for (i = 0; i < size; i++) if (manuf == onenand_manuf_ids[i].id) break; @@ -1974,6 +2245,265 @@ static int onenand_check_maf(int manuf) } /** +* flexonenand_get_boundary - Reads the SLC boundary +* @param onenand_info - onenand info structure +* +* Fill up boundary[] field in onenand_chip +**/ +static int flexonenand_get_boundary(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + unsigned int die, bdry; + int ret, syscfg, locked; + + /* Disable ECC */ + syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1); + this->write_word((syscfg | 0x0100), this->base + ONENAND_REG_SYS_CFG1); + + for (die = 0; die < this->dies; die++) { + this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0); + this->wait(mtd, FL_SYNCING); + + this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0); + ret = this->wait(mtd, FL_READING); + + bdry = this->read_word(this->base + ONENAND_DATARAM); + if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3) + locked = 0; + else + locked = 1; + this->boundary[die] = bdry & FLEXONENAND_PI_MASK; + + this->command(mtd, ONENAND_CMD_RESET, 0, 0); + ret = this->wait(mtd, FL_RESETING); + + printk(KERN_INFO "Die %d boundary: %d%s\n", die, + this->boundary[die], locked ? "(Locked)" : "(Unlocked)"); + } + + /* Enable ECC */ + this->write_word(syscfg, this->base + ONENAND_REG_SYS_CFG1); + return 0; +} + +/** + * flexonenand_get_size - Fill up fields in onenand_chip and mtd_info + * boundary[], diesize[], mtd->size, mtd->erasesize, + * mtd->eraseregions + * @param mtd - MTD device structure + */ +static void flexonenand_get_size(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + int die, i, eraseshift, density; + int blksperdie, maxbdry; + loff_t ofs; + + density = onenand_get_density(this->device_id); + blksperdie = ((loff_t)(16 << density) << 20) >> (this->erase_shift); + blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0; + maxbdry = blksperdie - 1; + eraseshift = this->erase_shift - 1; + + mtd->numeraseregions = this->dies << 1; + + /* This fills up the device boundary */ + flexonenand_get_boundary(mtd); + die = 0; + ofs = 0; + i = -1; + for (; die < this->dies; die++) { + if (!die || this->boundary[die-1] != maxbdry) { + i++; + mtd->eraseregions[i].offset = ofs; + mtd->eraseregions[i].erasesize = 1 << eraseshift; + mtd->eraseregions[i].numblocks = + this->boundary[die] + 1; + ofs += mtd->eraseregions[i].numblocks << eraseshift; + eraseshift++; + } else { + mtd->numeraseregions -= 1; + mtd->eraseregions[i].numblocks += + this->boundary[die] + 1; + ofs += (this->boundary[die] + 1) << (eraseshift - 1); + } + if (this->boundary[die] != maxbdry) { + i++; + mtd->eraseregions[i].offset = ofs; + mtd->eraseregions[i].erasesize = 1 << eraseshift; + mtd->eraseregions[i].numblocks = maxbdry ^ + this->boundary[die]; + ofs += mtd->eraseregions[i].numblocks << eraseshift; + eraseshift--; + } else + mtd->numeraseregions -= 1; + } + + /* Expose MLC erase size except when all blocks are SLC */ + mtd->erasesize = 1 << this->erase_shift; + if (mtd->numeraseregions == 1) + mtd->erasesize >>= 1; + + printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions); + for (i = 0; i < mtd->numeraseregions; i++) + printk(KERN_INFO "[offset: 0x%08llx, erasesize: 0x%05x," + " numblocks: %04u]\n", mtd->eraseregions[i].offset, + mtd->eraseregions[i].erasesize, + mtd->eraseregions[i].numblocks); + + for (die = 0, mtd->size = 0; die < this->dies; die++) { + this->diesize[die] = (loff_t) (blksperdie << this->erase_shift); + this->diesize[die] -= (loff_t) (this->boundary[die] + 1) + << (this->erase_shift - 1); + mtd->size += this->diesize[die]; + } +} + +/** + * flexonenand_check_blocks_erased - Check if blocks are erased + * @param mtd_info - mtd info structure + * @param start - first erase block to check + * @param end - last erase block to check + * + * Converting an unerased block from MLC to SLC + * causes byte values to change. Since both data and its ECC + * have changed, reads on the block give uncorrectable error. + * This might lead to the block being detected as bad. + * + * Avoid this by ensuring that the block to be converted is + * erased. + */ +static int flexonenand_check_blocks_erased(struct mtd_info *mtd, + int start, int end) +{ + struct onenand_chip *this = mtd->priv; + int i, ret; + int block; + struct mtd_oob_ops ops = { + .mode = MTD_OOB_PLACE, + .ooboffs = 0, + .ooblen = mtd->oobsize, + .datbuf = NULL, + .oobbuf = this->oob_buf, + }; + loff_t addr; + + printk(KERN_DEBUG "Check blocks from %d to %d\n", start, end); + + for (block = start; block <= end; block++) { + addr = flexonenand_addr(this, block); + if (onenand_block_isbad_nolock(mtd, addr, 0)) + continue; + + /* + * Since main area write results in ECC write to spare, + * it is sufficient to check only ECC bytes for change. + */ + ret = onenand_read_oob_nolock(mtd, addr, &ops); + if (ret) + return ret; + + for (i = 0; i < mtd->oobsize; i++) + if (this->oob_buf[i] != 0xff) + break; + + if (i != mtd->oobsize) { + printk(KERN_WARNING "Block %d not erased.\n", block); + return 1; + } + } + + return 0; +} + +/** + * flexonenand_set_boundary - Writes the SLC boundary + * @param mtd - mtd info structure + */ +int flexonenand_set_boundary(struct mtd_info *mtd, int die, + int boundary, int lock) +{ + struct onenand_chip *this = mtd->priv; + int ret, density, blksperdie, old, new, thisboundary; + loff_t addr; + + if (die >= this->dies) + return -EINVAL; + + if (boundary == this->boundary[die]) + return 0; + + density = onenand_get_density(this->device_id); + blksperdie = ((16 << density) << 20) >> this->erase_shift; + blksperdie >>= ONENAND_IS_DDP(this) ? 1 : 0; + + if (boundary >= blksperdie) { + printk("flexonenand_set_boundary:" + "Invalid boundary value. " + "Boundary not changed.\n"); + return -EINVAL; + } + + /* Check if converting blocks are erased */ + old = this->boundary[die] + (die * this->density_mask); + new = boundary + (die * this->density_mask); + ret = flexonenand_check_blocks_erased(mtd, min(old, new) + + 1, max(old, new)); + if (ret) { + printk(KERN_ERR "flexonenand_set_boundary: Please erase blocks before boundary change\n"); + return ret; + } + + this->command(mtd, FLEXONENAND_CMD_PI_ACCESS, die, 0); + this->wait(mtd, FL_SYNCING); + + /* Check is boundary is locked */ + this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0); + ret = this->wait(mtd, FL_READING); + + thisboundary = this->read_word(this->base + ONENAND_DATARAM); + if ((thisboundary >> FLEXONENAND_PI_UNLOCK_SHIFT) != 3) { + printk(KERN_ERR "flexonenand_set_boundary: boundary locked\n"); + goto out; + } + + printk(KERN_INFO "flexonenand_set_boundary: Changing die %d boundary: %d%s\n", + die, boundary, lock ? "(Locked)" : "(Unlocked)"); + + boundary &= FLEXONENAND_PI_MASK; + boundary |= lock ? 0 : (3 << FLEXONENAND_PI_UNLOCK_SHIFT); + + addr = die ? this->diesize[0] : 0; + this->command(mtd, ONENAND_CMD_ERASE, addr, 0); + ret = this->wait(mtd, FL_ERASING); + if (ret) { + printk("flexonenand_set_boundary:" + "Failed PI erase for Die %d\n", die); + goto out; + } + + this->write_word(boundary, this->base + ONENAND_DATARAM); + this->command(mtd, ONENAND_CMD_PROG, addr, 0); + ret = this->wait(mtd, FL_WRITING); + if (ret) { + printk("flexonenand_set_boundary:" + "Failed PI write for Die %d\n", die); + goto out; + } + + this->command(mtd, FLEXONENAND_CMD_PI_UPDATE, die, 0); + ret = this->wait(mtd, FL_WRITING); +out: + this->write_word(ONENAND_CMD_RESET, this->base + ONENAND_REG_COMMAND); + this->wait(mtd, FL_RESETING); + if (!ret) + /* Recalculate device size on boundary change*/ + flexonenand_get_size(mtd); + + return ret; +} + +/** * onenand_probe - [OneNAND Interface] Probe the OneNAND device * @param mtd MTD device structure * @@ -2016,48 +2546,69 @@ static int onenand_probe(struct mtd_info *mtd) maf_id = this->read_word(this->base + ONENAND_REG_MANUFACTURER_ID); dev_id = this->read_word(this->base + ONENAND_REG_DEVICE_ID); ver_id = this->read_word(this->base + ONENAND_REG_VERSION_ID); + this->technology = this->read_word(this->base + ONENAND_REG_TECHNOLOGY); /* Check OneNAND device */ if (maf_id != bram_maf_id || dev_id != bram_dev_id) return -ENXIO; - /* FIXME : Current OneNAND MTD doesn't support Flex-OneNAND */ - if (dev_id & (1 << 9)) { - printk("Not yet support Flex-OneNAND\n"); - return -ENXIO; - } - /* Flash device information */ mtd->name = onenand_print_device_info(dev_id, ver_id); this->device_id = dev_id; this->version_id = ver_id; density = onenand_get_density(dev_id); + if (FLEXONENAND(this)) { + this->dies = ONENAND_IS_DDP(this) ? 2 : 1; + /* Maximum possible erase regions */ + mtd->numeraseregions = this->dies << 1; + mtd->eraseregions = malloc(sizeof(struct mtd_erase_region_info) + * (this->dies << 1)); + if (!mtd->eraseregions) + return -ENOMEM; + } + + /* + * For Flex-OneNAND, chipsize represents maximum possible device size. + * mtd->size represents the actual device size. + */ this->chipsize = (16 << density) << 20; - /* Set density mask. it is used for DDP */ - if (ONENAND_IS_DDP(this)) - this->density_mask = (1 << (density + 6)); - else - this->density_mask = 0; /* OneNAND page size & block size */ /* The data buffer size is equal to page size */ mtd->writesize = this->read_word(this->base + ONENAND_REG_DATA_BUFFER_SIZE); + /* We use the full BufferRAM */ + if (ONENAND_IS_MLC(this)) + mtd->writesize <<= 1; + mtd->oobsize = mtd->writesize >> 5; /* Pagers per block is always 64 in OneNAND */ mtd->erasesize = mtd->writesize << 6; + /* + * Flex-OneNAND SLC area has 64 pages per block. + * Flex-OneNAND MLC area has 128 pages per block. + * Expose MLC erase size to find erase_shift and page_mask. + */ + if (FLEXONENAND(this)) + mtd->erasesize <<= 1; this->erase_shift = ffs(mtd->erasesize) - 1; this->page_shift = ffs(mtd->writesize) - 1; this->ppb_shift = (this->erase_shift - this->page_shift); this->page_mask = (mtd->erasesize / mtd->writesize) - 1; + /* Set density mask. it is used for DDP */ + if (ONENAND_IS_DDP(this)) + this->density_mask = this->chipsize >> (this->erase_shift + 1); /* It's real page size */ this->writesize = mtd->writesize; /* REVIST: Multichip handling */ - mtd->size = this->chipsize; + if (FLEXONENAND(this)) + flexonenand_get_size(mtd); + else + mtd->size = this->chipsize; /* Check OneNAND features */ onenand_check_features(mtd); @@ -2149,6 +2700,11 @@ int onenand_scan(struct mtd_info *mtd, int maxchips) * Allow subpage writes up to oobsize. */ switch (mtd->oobsize) { + case 128: + this->ecclayout = &onenand_oob_128; + mtd->subpage_sft = 0; + break; + case 64: this->ecclayout = &onenand_oob_64; mtd->subpage_sft = 2; diff --git a/drivers/mtd/onenand/onenand_bbt.c b/drivers/mtd/onenand/onenand_bbt.c index d538f95..1354877 100644 --- a/drivers/mtd/onenand/onenand_bbt.c +++ b/drivers/mtd/onenand/onenand_bbt.c @@ -69,6 +69,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t * buf, loff_t from; size_t readlen, ooblen; struct mtd_oob_ops ops; + int rgn; printk(KERN_INFO "Scanning device for bad blocks\n"); @@ -82,7 +83,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t * buf, /* Note that numblocks is 2 * (real numblocks) here; * see i += 2 below as it makses shifting and masking less painful */ - numblocks = mtd->size >> (bbm->bbt_erase_shift - 1); + numblocks = this->chipsize >> (bbm->bbt_erase_shift - 1); startblock = 0; from = 0; @@ -115,7 +116,12 @@ static int create_bbt(struct mtd_info *mtd, uint8_t * buf, } } i += 2; - from += (1 << bbm->bbt_erase_shift); + + if (FLEXONENAND(this)) { + rgn = flexonenand_region(mtd, from); + from += mtd->eraseregions[rgn].erasesize; + } else + from += (1 << bbm->bbt_erase_shift); } return 0; @@ -152,7 +158,7 @@ static int onenand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt) uint8_t res; /* Get block number * 2 */ - block = (int)(offs >> (bbm->bbt_erase_shift - 1)); + block = (int) (onenand_block(this, offs) << 1); res = (bbm->bbt[block >> 3] >> (block & 0x06)) & 0x03; MTDDEBUG (MTD_DEBUG_LEVEL2, @@ -191,7 +197,7 @@ int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd) struct bbm_info *bbm = this->bbm; int len, ret = 0; - len = mtd->size >> (this->erase_shift + 2); + len = this->chipsize >> (this->erase_shift + 2); /* Allocate memory (2bit per block) */ bbm->bbt = malloc(len); if (!bbm->bbt) { diff --git a/drivers/mtd/onenand/onenand_uboot.c b/drivers/mtd/onenand/onenand_uboot.c index 9823b5b..c642016 100644 --- a/drivers/mtd/onenand/onenand_uboot.c +++ b/drivers/mtd/onenand/onenand_uboot.c @@ -40,8 +40,10 @@ void onenand_init(void) onenand_scan(&onenand_mtd, 1); + if (onenand_chip.device_id & DEVICE_IS_FLEXONENAND) + puts("Flex-"); puts("OneNAND: "); - print_size(onenand_mtd.size, "\n"); + print_size(onenand_chip.chipsize, "\n"); #ifdef CONFIG_MTD_DEVICE /* diff --git a/drivers/rtc/ftrtc010.c b/drivers/rtc/ftrtc010.c index c3c0bc2..7738a7a 100644 --- a/drivers/rtc/ftrtc010.c +++ b/drivers/rtc/ftrtc010.c @@ -47,15 +47,15 @@ struct ftrtc010 { static struct ftrtc010 *rtc = (struct ftrtc010 *)CONFIG_FTRTC010_BASE; -static void ftrtc010_enable (void) +static void ftrtc010_enable(void) { - writel (FTRTC010_CR_ENABLE, &rtc->cr); + writel(FTRTC010_CR_ENABLE, &rtc->cr); } /* * return current time in seconds */ -static unsigned long ftrtc010_time (void) +static unsigned long ftrtc010_time(void) { unsigned long day; unsigned long hour; @@ -64,11 +64,11 @@ static unsigned long ftrtc010_time (void) unsigned long second2; do { - second = readl (&rtc->sec); - day = readl (&rtc->day); - hour = readl (&rtc->hour); - minute = readl (&rtc->min); - second2 = readl (&rtc->sec); + second = readl(&rtc->sec); + day = readl(&rtc->day); + hour = readl(&rtc->hour); + minute = readl(&rtc->min); + second2 = readl(&rtc->sec); } while (second != second2); return day * 24 * 60 * 60 + hour * 60 * 60 + minute * 60 + second; @@ -78,16 +78,16 @@ static unsigned long ftrtc010_time (void) * Get the current time from the RTC */ -int rtc_get (struct rtc_time *tmp) +int rtc_get(struct rtc_time *tmp) { unsigned long now; - debug ("%s(): record register: %x\n", - __func__, readl (&rtc->record)); + debug("%s(): record register: %x\n", + __func__, readl(&rtc->record)); - now = ftrtc010_time () + readl (&rtc->record); + now = ftrtc010_time() + readl(&rtc->record); - to_tm (now, tmp); + to_tm(now, tmp); return 0; } @@ -95,30 +95,30 @@ int rtc_get (struct rtc_time *tmp) /* * Set the RTC */ -int rtc_set (struct rtc_time *tmp) +int rtc_set(struct rtc_time *tmp) { unsigned long new; unsigned long now; - debug ("%s(): DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", - __func__, - tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, - tmp->tm_hour, tmp->tm_min, tmp->tm_sec); + debug("%s(): DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + __func__, + tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, + tmp->tm_hour, tmp->tm_min, tmp->tm_sec); - new = mktime (tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_hour, - tmp->tm_min, tmp->tm_sec); + new = mktime(tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_hour, + tmp->tm_min, tmp->tm_sec); - now = ftrtc010_time (); + now = ftrtc010_time(); - debug ("%s(): write %lx to record register\n", __func__, new - now); + debug("%s(): write %lx to record register\n", __func__, new - now); - writel (new - now, &rtc->record); + writel(new - now, &rtc->record); return 0; } -void rtc_reset (void) +void rtc_reset(void) { - debug ("%s()\n", __func__); - ftrtc010_enable (); + debug("%s()\n", __func__); + ftrtc010_enable(); } diff --git a/drivers/rtc/m41t94.c b/drivers/rtc/m41t94.c index 02b41d9..5b665bb 100644 --- a/drivers/rtc/m41t94.c +++ b/drivers/rtc/m41t94.c @@ -120,5 +120,4 @@ void rtc_reset(void) * Could not be tested as the reset pin is not wired on * the sbc35-ag20 board */ - return 0; } diff --git a/drivers/rtc/s3c24x0_rtc.c b/drivers/rtc/s3c24x0_rtc.c index 1ce34e3..04de5ca 100644 --- a/drivers/rtc/s3c24x0_rtc.c +++ b/drivers/rtc/s3c24x0_rtc.c @@ -30,11 +30,7 @@ #if (defined(CONFIG_CMD_DATE)) -#if defined(CONFIG_S3C2400) -#include <s3c2400.h> -#elif defined(CONFIG_S3C2410) -#include <s3c2410.h> -#endif +#include <asm/arch/s3c24x0_cpu.h> #include <rtc.h> #include <asm/io.h> diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c index 1b974e0..6d22df7 100644 --- a/drivers/serial/s3c64xx.c +++ b/drivers/serial/s3c64xx.c @@ -23,7 +23,7 @@ #include <common.h> -#include <s3c6400.h> +#include <asm/arch/s3c6400.h> #ifdef CONFIG_SERIAL1 #define UART_NR S3C64XX_UART0 diff --git a/drivers/serial/serial_s3c24x0.c b/drivers/serial/serial_s3c24x0.c index c2c72e4..5dd4dd8 100644 --- a/drivers/serial/serial_s3c24x0.c +++ b/drivers/serial/serial_s3c24x0.c @@ -19,11 +19,7 @@ */ #include <common.h> -#if defined(CONFIG_S3C2400) || defined(CONFIG_TRAB) -#include <s3c2400.h> -#elif defined(CONFIG_S3C2410) -#include <s3c2410.h> -#endif +#include <asm/arch/s3c24x0_cpu.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/drivers/serial/serial_s5pc1xx.c b/drivers/serial/serial_s5pc1xx.c index 68c06a9..73669a9 100644 --- a/drivers/serial/serial_s5pc1xx.c +++ b/drivers/serial/serial_s5pc1xx.c @@ -98,14 +98,24 @@ int serial_init_dev(const int dev_index) return 0; } -static int serial_err_check(const int dev_index) +static int serial_err_check(const int dev_index, int op) { struct s5pc1xx_uart *const uart = s5pc1xx_get_base_uart(dev_index); + unsigned int mask; + + /* + * UERSTAT + * Break Detect [3] + * Frame Err [2] : receive operation + * Parity Err [1] : receive operation + * Overrun Err [0] : receive operation + */ + if (op) + mask = 0x8; + else + mask = 0xf; - if (readl(&uart->uerstat) & 0xf) - return 1; - - return 0; + return readl(&uart->uerstat) & mask; } /* @@ -119,7 +129,7 @@ int serial_getc_dev(const int dev_index) /* wait for character to arrive */ while (!(readl(&uart->utrstat) & 0x1)) { - if (serial_err_check(dev_index)) + if (serial_err_check(dev_index, 0)) return 0; } @@ -135,7 +145,7 @@ void serial_putc_dev(const char c, const int dev_index) /* wait for room in the tx FIFO */ while (!(readl(&uart->utrstat) & 0x2)) { - if (serial_err_check(dev_index)) + if (serial_err_check(dev_index, 1)) return; } diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 67d478f..b03a600 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -65,8 +65,7 @@ #endif #if defined(CONFIG_ARM920T) || \ - defined(CONFIG_S3C2400) || \ - defined(CONFIG_S3C2410) || \ + defined(CONFIG_S3C24X0) || \ defined(CONFIG_S3C6400) || \ defined(CONFIG_440EP) || \ defined(CONFIG_PCI_OHCI) || \ diff --git a/drivers/usb/host/s3c64xx-hcd.c b/drivers/usb/host/s3c64xx-hcd.c index 274a4ed..cd295da 100644 --- a/drivers/usb/host/s3c64xx-hcd.c +++ b/drivers/usb/host/s3c64xx-hcd.c @@ -25,7 +25,7 @@ */ #include <common.h> -#include <s3c6400.h> +#include <asm/arch/s3c6400.h> int usb_cpu_init(void) { diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c index fbc4df9..16d6689 100644 --- a/drivers/video/cfb_console.c +++ b/drivers/video/cfb_console.c @@ -146,9 +146,11 @@ CONFIG_VIDEO_HW_CURSOR: - Uses the hardware cursor capability of the #ifdef CONFIG_VIDEO_CORALP #define VIDEO_FB_LITTLE_ENDIAN #endif +#ifdef CONFIG_VIDEO_MB862xx_ACCEL #define VIDEO_HW_RECTFILL #define VIDEO_HW_BITBLT #endif +#endif /*****************************************************************************/ /* Include video_fb.h after definitions of VIDEO_HW_RECTFILL etc */ @@ -319,7 +321,7 @@ void console_cursor (int state); #else #define SWAP16(x) (x) #define SWAP32(x) (x) -#if defined(VIDEO_FB_16BPP_PIXEL_SWAP) +#if defined(VIDEO_FB_16BPP_WORD_SWAP) #define SHORTSWAP32(x) ( ((x) >> 16) | ((x) << 16) ) #else #define SHORTSWAP32(x) (x) diff --git a/drivers/video/mb862xx.c b/drivers/video/mb862xx.c index a8676cc..edf34aa 100644 --- a/drivers/video/mb862xx.c +++ b/drivers/video/mb862xx.c @@ -89,6 +89,7 @@ unsigned int fr_div[] = { 0x00000f00, 0x00000900, 0x00000500 }; (GC_DISP_BASE | GC_L0PAL0) + \ ((idx) << 2)), (val)) +#if defined(CONFIG_VIDEO_MB862xx_ACCEL) static void gdc_sw_reset (void) { GraphicDevice *dev = &mb862xx; @@ -129,6 +130,7 @@ static void de_wait_slots (int slots) break; } } +#endif #if !defined(CONFIG_VIDEO_CORALP) static void board_disp_init (void) @@ -144,11 +146,13 @@ static void board_disp_init (void) #endif /* - * Init drawing engine + * Init drawing engine if accel enabled. + * Also clears visible framebuffer. */ static void de_init (void) { GraphicDevice *dev = &mb862xx; +#if defined(CONFIG_VIDEO_MB862xx_ACCEL) int cf = (dev->gdfBytesPP == 1) ? 0x0000 : 0x8000; dev->dprBase = dev->frameAdrs + GC_DRAW_BASE; @@ -174,6 +178,14 @@ static void de_init (void) DE_WR_FIFO (dev->winSizeY << 16 | dev->winSizeX); /* sync with SW access to framebuffer */ de_wait (); +#else + unsigned int i, *p; + + i = dev->winSizeX * dev->winSizeY; + p = (unsigned int *)dev->frameAdrs; + while (i--) + *p++ = 0; +#endif } #if defined(CONFIG_VIDEO_CORALP) @@ -340,6 +352,30 @@ unsigned int card_init (void) } #endif + +#if !defined(CONFIG_VIDEO_CORALP) +int mb862xx_probe(unsigned int addr) +{ + GraphicDevice *dev = &mb862xx; + unsigned int reg; + + dev->frameAdrs = addr; + dev->dprBase = dev->frameAdrs + GC_DRAW_BASE; + + /* Try to access GDC ID/Revision registers */ + reg = HOST_RD_REG (GC_CID); + reg = HOST_RD_REG (GC_CID); + if (reg == 0x303) { + reg = DE_RD_REG(GC_REV); + reg = DE_RD_REG(GC_REV); + if ((reg & ~0xff) == 0x20050100) + return MB862XX_TYPE_LIME; + } + + return 0; +} +#endif + void *video_hw_init (void) { GraphicDevice *dev = &mb862xx; @@ -359,8 +395,16 @@ void *video_hw_init (void) if ((dev->frameAdrs = board_video_init ()) == 0) { puts ("Controller not found!\n"); return NULL; - } else + } else { puts ("Lime\n"); + + /* Set Change of Clock Frequency Register */ + HOST_WR_REG (GC_CCF, CONFIG_SYS_MB862xx_CCF); + /* Delay required */ + udelay(300); + /* Set Memory I/F Mode Register) */ + HOST_WR_REG (GC_MMR, CONFIG_SYS_MB862xx_MMR); + } #endif de_init (); @@ -389,6 +433,7 @@ void video_set_lut (unsigned int index, unsigned char r, L0PAL_WR_REG (index, (r << 16) | (g << 8) | (b)); } +#if defined(CONFIG_VIDEO_MB862xx_ACCEL) /* * Drawing engine Fill and BitBlt screen region */ @@ -430,3 +475,4 @@ void video_hw_bitblt (unsigned int bpp, unsigned int src_x, DE_WR_FIFO ((height << 16) | width); de_wait (); /* sync */ } +#endif diff --git a/examples/api/Makefile b/examples/api/Makefile index 04a270b..d4c5ca2 100644 --- a/examples/api/Makefile +++ b/examples/api/Makefile @@ -44,6 +44,7 @@ EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/crc32.o EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/ctype.o EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/div64.o EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/string.o +EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/time.o EXT_COBJ_FILES-$(CONFIG_API) += lib_generic/vsprintf.o ifeq ($(ARCH),ppc) EXT_SOBJ_FILES-$(CONFIG_API) += lib_ppc/ppcstring.o diff --git a/examples/api/libgenwrap.c b/examples/api/libgenwrap.c index 2b62bad..2b107d9 100644 --- a/examples/api/libgenwrap.c +++ b/examples/api/libgenwrap.c @@ -74,7 +74,7 @@ void putc (const char c) ub_putc(c); } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { ub_udelay(usec); } diff --git a/fs/ubifs/ubifs.c b/fs/ubifs/ubifs.c index 82f1c54..3fc7990 100644 --- a/fs/ubifs/ubifs.c +++ b/fs/ubifs/ubifs.c @@ -26,10 +26,6 @@ #include "ubifs.h" #include <u-boot/zlib.h> -#if !defined(CONFIG_SYS_64BIT_VSPRINTF) -#warning Please define CONFIG_SYS_64BIT_VSPRINTF for correct output! -#endif - DECLARE_GLOBAL_DATA_PTR; /* compress.c */ diff --git a/include/4xx_i2c.h b/include/4xx_i2c.h index 070657f..0c6c926 100644 --- a/include/4xx_i2c.h +++ b/include/4xx_i2c.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 + * (C) Copyright 2007-2009 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * See file CREDITS for list of people who contributed to this @@ -52,22 +52,26 @@ #define I2C_BASE_ADDR (0xEF600500 + I2C_BUS_OFFS) #endif -#define I2C_REGISTERS_BASE_ADDRESS I2C_BASE_ADDR -#define IIC_MDBUF (I2C_REGISTERS_BASE_ADDRESS+IICMDBUF) -#define IIC_SDBUF (I2C_REGISTERS_BASE_ADDRESS+IICSDBUF) -#define IIC_LMADR (I2C_REGISTERS_BASE_ADDRESS+IICLMADR) -#define IIC_HMADR (I2C_REGISTERS_BASE_ADDRESS+IICHMADR) -#define IIC_CNTL (I2C_REGISTERS_BASE_ADDRESS+IICCNTL) -#define IIC_MDCNTL (I2C_REGISTERS_BASE_ADDRESS+IICMDCNTL) -#define IIC_STS (I2C_REGISTERS_BASE_ADDRESS+IICSTS) -#define IIC_EXTSTS (I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS) -#define IIC_LSADR (I2C_REGISTERS_BASE_ADDRESS+IICLSADR) -#define IIC_HSADR (I2C_REGISTERS_BASE_ADDRESS+IICHSADR) -#define IIC_CLKDIV (I2C_REGISTERS_BASE_ADDRESS+IIC0_CLKDIV) -#define IIC_INTRMSK (I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK) -#define IIC_XFRCNT (I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT) -#define IIC_XTCNTLSS (I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS) -#define IIC_DIRECTCNTL (I2C_REGISTERS_BASE_ADDRESS+IICDIRECTCNTL) +struct ppc4xx_i2c { + u8 mdbuf; + u8 res1; + u8 sdbuf; + u8 res2; + u8 lmadr; + u8 hmadr; + u8 cntl; + u8 mdcntl; + u8 sts; + u8 extsts; + u8 lsadr; + u8 hsadr; + u8 clkdiv; + u8 intrmsk; + u8 xfrcnt; + u8 xtcntlss; + u8 directcntl; + u8 intr; +}; /* MDCNTL Register Bit definition */ #define IIC_MDCNTL_HSCL 0x01 diff --git a/include/asm-arm/arch-a320/a320.h b/include/asm-arm/arch-a320/a320.h new file mode 100644 index 0000000..5c0a097 --- /dev/null +++ b/include/asm-arm/arch-a320/a320.h @@ -0,0 +1,35 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <ratbert@faraday-tech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __A320_H +#define __A320_H + +/* + * Hardware register bases + */ +#define CONFIG_FTSMC020_BASE 0x90200000 /* Static Memory Controller */ +#define CONFIG_DEBUG_LED 0x902ffffc /* Debug LED */ +#define CONFIG_FTSDMC020_BASE 0x90300000 /* SDRAM Controller */ +#define CONFIG_FTMAC100_BASE 0x90900000 /* Ethernet */ +#define CONFIG_FTPMU010_BASE 0x98100000 /* Power Management Unit */ +#define CONFIG_FTTMR010_BASE 0x98400000 /* Timer */ +#define CONFIG_FTRTC010_BASE 0x98600000 /* Real Time Clock*/ + +#endif /* __A320_H */ + diff --git a/include/asm-arm/arch-a320/ftpmu010.h b/include/asm-arm/arch-a320/ftpmu010.h new file mode 100644 index 0000000..8ef7a37 --- /dev/null +++ b/include/asm-arm/arch-a320/ftpmu010.h @@ -0,0 +1,146 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <ratbert@faraday-tech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Power Management Unit + */ +#ifndef __FTPMU010_H +#define __FTPMU010_H + +struct ftpmu010 { + unsigned int IDNMBR0; /* 0x00 */ + unsigned int reserved0; /* 0x04 */ + unsigned int OSCC; /* 0x08 */ + unsigned int PMODE; /* 0x0C */ + unsigned int PMCR; /* 0x10 */ + unsigned int PED; /* 0x14 */ + unsigned int PEDSR; /* 0x18 */ + unsigned int reserved1; /* 0x1C */ + unsigned int PMSR; /* 0x20 */ + unsigned int PGSR; /* 0x24 */ + unsigned int MFPSR; /* 0x28 */ + unsigned int MISC; /* 0x2C */ + unsigned int PDLLCR0; /* 0x30 */ + unsigned int PDLLCR1; /* 0x34 */ + unsigned int AHBMCLKOFF; /* 0x38 */ + unsigned int APBMCLKOFF; /* 0x3C */ + unsigned int DCSRCR0; /* 0x40 */ + unsigned int DCSRCR1; /* 0x44 */ + unsigned int DCSRCR2; /* 0x48 */ + unsigned int SDRAMHTC; /* 0x4C */ + unsigned int PSPR0; /* 0x50 */ + unsigned int PSPR1; /* 0x54 */ + unsigned int PSPR2; /* 0x58 */ + unsigned int PSPR3; /* 0x5C */ + unsigned int PSPR4; /* 0x60 */ + unsigned int PSPR5; /* 0x64 */ + unsigned int PSPR6; /* 0x68 */ + unsigned int PSPR7; /* 0x6C */ + unsigned int PSPR8; /* 0x70 */ + unsigned int PSPR9; /* 0x74 */ + unsigned int PSPR10; /* 0x78 */ + unsigned int PSPR11; /* 0x7C */ + unsigned int PSPR12; /* 0x80 */ + unsigned int PSPR13; /* 0x84 */ + unsigned int PSPR14; /* 0x88 */ + unsigned int PSPR15; /* 0x8C */ + unsigned int AHBDMA_RACCS; /* 0x90 */ + unsigned int reserved2; /* 0x94 */ + unsigned int reserved3; /* 0x98 */ + unsigned int JSS; /* 0x9C */ + unsigned int CFC_RACC; /* 0xA0 */ + unsigned int SSP1_RACC; /* 0xA4 */ + unsigned int UART1TX_RACC; /* 0xA8 */ + unsigned int UART1RX_RACC; /* 0xAC */ + unsigned int UART2TX_RACC; /* 0xB0 */ + unsigned int UART2RX_RACC; /* 0xB4 */ + unsigned int SDC_RACC; /* 0xB8 */ + unsigned int I2SAC97_RACC; /* 0xBC */ + unsigned int IRDATX_RACC; /* 0xC0 */ + unsigned int reserved4; /* 0xC4 */ + unsigned int USBD_RACC; /* 0xC8 */ + unsigned int IRDARX_RACC; /* 0xCC */ + unsigned int IRDA_RACC; /* 0xD0 */ + unsigned int ED0_RACC; /* 0xD4 */ + unsigned int ED1_RACC; /* 0xD8 */ +}; + +/* + * ID Number 0 Register + */ +#define FTPMU010_ID_A320A 0x03200000 +#define FTPMU010_ID_A320C 0x03200010 +#define FTPMU010_ID_A320D 0x03200030 + +/* + * OSC Control Register + */ +#define FTPMU010_OSCC_OSCH_TRI (1 << 11) +#define FTPMU010_OSCC_OSCH_STABLE (1 << 9) +#define FTPMU010_OSCC_OSCH_OFF (1 << 8) + +#define FTPMU010_OSCC_OSCL_TRI (1 << 3) +#define FTPMU010_OSCC_OSCL_RTCLSEL (1 << 2) +#define FTPMU010_OSCC_OSCL_STABLE (1 << 1) +#define FTPMU010_OSCC_OSCL_OFF (1 << 0) + +/* + * Power Mode Register + */ +#define FTPMU010_PMODE_DIVAHBCLK_MASK (0x7 << 4) +#define FTPMU010_PMODE_DIVAHBCLK_2 (0x0 << 4) +#define FTPMU010_PMODE_DIVAHBCLK_3 (0x1 << 4) +#define FTPMU010_PMODE_DIVAHBCLK_4 (0x2 << 4) +#define FTPMU010_PMODE_DIVAHBCLK_6 (0x3 << 4) +#define FTPMU010_PMODE_DIVAHBCLK_8 (0x4 << 4) +#define FTPMU010_PMODE_DIVAHBCLK(pmode) (((pmode) >> 4) & 0x7) +#define FTPMU010_PMODE_FCS (1 << 2) +#define FTPMU010_PMODE_TURBO (1 << 1) +#define FTPMU010_PMODE_SLEEP (1 << 0) + +/* + * Power Manager Status Register + */ +#define FTPMU010_PMSR_SMR (1 << 10) + +#define FTPMU010_PMSR_RDH (1 << 2) +#define FTPMU010_PMSR_PH (1 << 1) +#define FTPMU010_PMSR_CKEHLOW (1 << 0) + +/* + * Multi-Function Port Setting Register + */ +#define FTPMU010_MFPSR_MODEMPINSEL (1 << 14) +#define FTPMU010_MFPSR_AC97CLKOUTSEL (1 << 13) +#define FTPMU010_MFPSR_AC97PINSEL (1 << 3) + +/* + * PLL/DLL Control Register 0 + */ +#define FTPMU010_PDLLCR0_HCLKOUTDIS(cr0) (((cr0) >> 20) & 0xf) +#define FTPMU010_PDLLCR0_DLLFRAG (1 << 19) +#define FTPMU010_PDLLCR0_DLLSTSEL (1 << 18) +#define FTPMU010_PDLLCR0_DLLSTABLE (1 << 17) +#define FTPMU010_PDLLCR0_DLLDIS (1 << 16) +#define FTPMU010_PDLLCR0_PLL1NS(cr0) (((cr0) >> 3) & 0x1ff) +#define FTPMU010_PDLLCR0_PLL1STSEL (1 << 2) +#define FTPMU010_PDLLCR0_PLL1STABLE (1 << 1) +#define FTPMU010_PDLLCR0_PLL1DIS (1 << 0) + +#endif /* __FTPMU010_H */ diff --git a/include/asm-arm/arch-a320/ftsdmc020.h b/include/asm-arm/arch-a320/ftsdmc020.h new file mode 100644 index 0000000..0699772 --- /dev/null +++ b/include/asm-arm/arch-a320/ftsdmc020.h @@ -0,0 +1,103 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <ratbert@faraday-tech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * SDRAM Controller + */ +#ifndef __FTSDMC020_H +#define __FTSDMC020_H + +#define FTSDMC020_OFFSET_TP0 0x00 +#define FTSDMC020_OFFSET_TP1 0x04 +#define FTSDMC020_OFFSET_CR 0x08 +#define FTSDMC020_OFFSET_BANK0_BSR 0x0C +#define FTSDMC020_OFFSET_BANK1_BSR 0x10 +#define FTSDMC020_OFFSET_BANK2_BSR 0x14 +#define FTSDMC020_OFFSET_BANK3_BSR 0x18 +#define FTSDMC020_OFFSET_BANK4_BSR 0x1C +#define FTSDMC020_OFFSET_BANK5_BSR 0x20 +#define FTSDMC020_OFFSET_BANK6_BSR 0x24 +#define FTSDMC020_OFFSET_BANK7_BSR 0x28 +#define FTSDMC020_OFFSET_ACR 0x34 + +/* + * Timing Parametet 0 Register + */ +#define FTSDMC020_TP0_TCL(x) ((x) & 0x3) +#define FTSDMC020_TP0_TWR(x) (((x) & 0x3) << 4) +#define FTSDMC020_TP0_TRF(x) (((x) & 0xf) << 8) +#define FTSDMC020_TP0_TRCD(x) (((x) & 0x7) << 12) +#define FTSDMC020_TP0_TRP(x) (((x) & 0xf) << 16) +#define FTSDMC020_TP0_TRAS(x) (((x) & 0xf) << 20) + +/* + * Timing Parametet 1 Register + */ +#define FTSDMC020_TP1_REF_INTV(x) ((x) & 0xffff) +#define FTSDMC020_TP1_INI_REFT(x) (((x) & 0xf) << 16) +#define FTSDMC020_TP1_INI_PREC(x) (((x) & 0xf) << 20) + +/* + * Configuration Register + */ +#define FTSDMC020_CR_SREF (1 << 0) +#define FTSDMC020_CR_PWDN (1 << 1) +#define FTSDMC020_CR_ISMR (1 << 2) +#define FTSDMC020_CR_IREF (1 << 3) +#define FTSDMC020_CR_IPREC (1 << 4) +#define FTSDMC020_CR_REFTYPE (1 << 5) + +/* + * SDRAM External Bank Base/Size Register + */ +#define FTSDMC020_BANK_ENABLE (1 << 28) + +#define FTSDMC020_BANK_BASE(addr) (((addr) >> 20) << 16) + +#define FTSDMC020_BANK_DDW_X4 (0 << 12) +#define FTSDMC020_BANK_DDW_X8 (1 << 12) +#define FTSDMC020_BANK_DDW_X16 (2 << 12) +#define FTSDMC020_BANK_DDW_X32 (3 << 12) + +#define FTSDMC020_BANK_DSZ_16M (0 << 8) +#define FTSDMC020_BANK_DSZ_64M (1 << 8) +#define FTSDMC020_BANK_DSZ_128M (2 << 8) +#define FTSDMC020_BANK_DSZ_256M (3 << 8) + +#define FTSDMC020_BANK_MBW_8 (0 << 4) +#define FTSDMC020_BANK_MBW_16 (1 << 4) +#define FTSDMC020_BANK_MBW_32 (2 << 4) + +#define FTSDMC020_BANK_SIZE_1M 0x0 +#define FTSDMC020_BANK_SIZE_2M 0x1 +#define FTSDMC020_BANK_SIZE_4M 0x2 +#define FTSDMC020_BANK_SIZE_8M 0x3 +#define FTSDMC020_BANK_SIZE_16M 0x4 +#define FTSDMC020_BANK_SIZE_32M 0x5 +#define FTSDMC020_BANK_SIZE_64M 0x6 +#define FTSDMC020_BANK_SIZE_128M 0x7 +#define FTSDMC020_BANK_SIZE_256M 0x8 + +/* + * Arbiter Control Register + */ +#define FTSDMC020_ACR_TOC(x) ((x) & 0x1f) +#define FTSDMC020_ACR_TOE (1 << 8) + +#endif /* __FTSDMC020_H */ diff --git a/include/asm-arm/arch-a320/ftsmc020.h b/include/asm-arm/arch-a320/ftsmc020.h new file mode 100644 index 0000000..95d9500 --- /dev/null +++ b/include/asm-arm/arch-a320/ftsmc020.h @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <ratbert@faraday-tech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Static Memory Controller + */ +#ifndef __FTSMC020_H +#define __FTSMC020_H + +#ifndef __ASSEMBLY__ + +struct ftsmc020 { + struct { + unsigned int cr; /* 0x00, 0x08, 0x10, 0x18 */ + unsigned int tpr; /* 0x04, 0x0c, 0x14, 0x1c */ + } bank[4]; + unsigned int pad[8]; /* 0x20 - 0x3c */ + unsigned int ssr; /* 0x40 */ +}; + +void ftsmc020_init(void); + +#endif /* __ASSEMBLY__ */ + +/* + * Memory Bank Configuration Register + */ +#define FTSMC020_BANK_ENABLE (1 << 28) +#define FTSMC020_BANK_BASE(x) ((x) & 0x0fff1000) + +#define FTSMC020_BANK_WPROT (1 << 11) + +#define FTSMC020_BANK_SIZE_32K (0xb << 4) +#define FTSMC020_BANK_SIZE_64K (0xc << 4) +#define FTSMC020_BANK_SIZE_128K (0xd << 4) +#define FTSMC020_BANK_SIZE_256K (0xe << 4) +#define FTSMC020_BANK_SIZE_512K (0xf << 4) +#define FTSMC020_BANK_SIZE_1M (0x0 << 4) +#define FTSMC020_BANK_SIZE_2M (0x1 << 4) +#define FTSMC020_BANK_SIZE_4M (0x2 << 4) +#define FTSMC020_BANK_SIZE_8M (0x3 << 4) +#define FTSMC020_BANK_SIZE_16M (0x4 << 4) +#define FTSMC020_BANK_SIZE_32M (0x5 << 4) + +#define FTSMC020_BANK_MBW_8 (0x0 << 0) +#define FTSMC020_BANK_MBW_16 (0x1 << 0) +#define FTSMC020_BANK_MBW_32 (0x2 << 0) + +/* + * Memory Bank Timing Parameter Register + */ +#define FTSMC020_TPR_ETRNA(x) (((x) & 0xf) << 28) +#define FTSMC020_TPR_EATI(x) (((x) & 0xf) << 24) +#define FTSMC020_TPR_RBE (1 << 20) +#define FTSMC020_TPR_AST(x) (((x) & 0x3) << 18) +#define FTSMC020_TPR_CTW(x) (((x) & 0x3) << 16) +#define FTSMC020_TPR_ATI(x) (((x) & 0xf) << 12) +#define FTSMC020_TPR_AT2(x) (((x) & 0x3) << 8) +#define FTSMC020_TPR_WTC(x) (((x) & 0x3) << 6) +#define FTSMC020_TPR_AHT(x) (((x) & 0x3) << 4) +#define FTSMC020_TPR_TRNA(x) (((x) & 0xf) << 0) + +#endif /* __FTSMC020_H */ diff --git a/include/asm-arm/arch-a320/fttmr010.h b/include/asm-arm/arch-a320/fttmr010.h new file mode 100644 index 0000000..72abcb3 --- /dev/null +++ b/include/asm-arm/arch-a320/fttmr010.h @@ -0,0 +1,73 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <ratbert@faraday-tech.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * Timer + */ +#ifndef __FTTMR010_H +#define __FTTMR010_H + +struct fttmr010 { + unsigned int timer1_counter; /* 0x00 */ + unsigned int timer1_load; /* 0x04 */ + unsigned int timer1_match1; /* 0x08 */ + unsigned int timer1_match2; /* 0x0c */ + unsigned int timer2_counter; /* 0x10 */ + unsigned int timer2_load; /* 0x14 */ + unsigned int timer2_match1; /* 0x18 */ + unsigned int timer2_match2; /* 0x1c */ + unsigned int timer3_counter; /* 0x20 */ + unsigned int timer3_load; /* 0x24 */ + unsigned int timer3_match1; /* 0x28 */ + unsigned int timer3_match2; /* 0x2c */ + unsigned int cr; /* 0x30 */ + unsigned int interrupt_state; /* 0x34 */ + unsigned int interrupt_mask; /* 0x38 */ +}; + +/* + * Timer Control Register + */ +#define FTTMR010_TM3_UPDOWN (1 << 11) +#define FTTMR010_TM2_UPDOWN (1 << 10) +#define FTTMR010_TM1_UPDOWN (1 << 9) +#define FTTMR010_TM3_OFENABLE (1 << 8) +#define FTTMR010_TM3_CLOCK (1 << 7) +#define FTTMR010_TM3_ENABLE (1 << 6) +#define FTTMR010_TM2_OFENABLE (1 << 5) +#define FTTMR010_TM2_CLOCK (1 << 4) +#define FTTMR010_TM2_ENABLE (1 << 3) +#define FTTMR010_TM1_OFENABLE (1 << 2) +#define FTTMR010_TM1_CLOCK (1 << 1) +#define FTTMR010_TM1_ENABLE (1 << 0) + +/* + * Timer Interrupt State & Mask Registers + */ +#define FTTMR010_TM3_OVERFLOW (1 << 8) +#define FTTMR010_TM3_MATCH2 (1 << 7) +#define FTTMR010_TM3_MATCH1 (1 << 6) +#define FTTMR010_TM2_OVERFLOW (1 << 5) +#define FTTMR010_TM2_MATCH2 (1 << 4) +#define FTTMR010_TM2_MATCH1 (1 << 3) +#define FTTMR010_TM1_OVERFLOW (1 << 2) +#define FTTMR010_TM1_MATCH2 (1 << 1) +#define FTTMR010_TM1_MATCH1 (1 << 0) + +#endif /* __FTTMR010_H */ diff --git a/include/asm-arm/arch-davinci/hardware.h b/include/asm-arm/arch-davinci/hardware.h index acf12ea..81cc8ab 100644 --- a/include/asm-arm/arch-davinci/hardware.h +++ b/include/asm-arm/arch-davinci/hardware.h @@ -49,6 +49,8 @@ typedef volatile unsigned int * dv_reg_p; * on other DaVinci chips. Double check them before you try * using the addresses ... or PSC module identifiers, etc. */ +#ifndef CONFIG_SOC_DA8XX + #define DAVINCI_DMA_3PCC_BASE (0x01c00000) #define DAVINCI_DMA_3PTC0_BASE (0x01c10000) #define DAVINCI_DMA_3PTC1_BASE (0x01c10400) @@ -116,10 +118,46 @@ typedef volatile unsigned int * dv_reg_p; #endif +#else /* CONFIG_SOC_DA8XX */ + +#define DAVINCI_UART0_BASE 0x01c42000 +#define DAVINCI_UART1_BASE 0x01d0c000 +#define DAVINCI_UART2_BASE 0x01d0d000 +#define DAVINCI_I2C0_BASE 0x01c22000 +#define DAVINCI_I2C1_BASE 0x01e28000 +#define DAVINCI_TIMER0_BASE 0x01c20000 +#define DAVINCI_TIMER1_BASE 0x01c21000 +#define DAVINCI_WDOG_BASE 0x01c21000 +#define DAVINCI_PLL_CNTRL0_BASE 0x01c11000 +#define DAVINCI_PSC0_BASE 0x01c10000 +#define DAVINCI_PSC1_BASE 0x01e27000 +#define DAVINCI_SPI0_BASE 0x01c41000 +#define DAVINCI_USB_OTG_BASE 0x01e00000 +#define DAVINCI_SPI1_BASE 0x01e12000 +#define DAVINCI_GPIO_BASE 0x01e26000 +#define DAVINCI_EMAC_CNTRL_REGS_BASE 0x01e23000 +#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE 0x01e22000 +#define DAVINCI_EMAC_WRAPPER_RAM_BASE 0x01e20000 +#define DAVINCI_MDIO_CNTRL_REGS_BASE 0x01e24000 +#define DAVINCI_ASYNC_EMIF_CNTRL_BASE 0x68000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x40000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x60000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x62000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE4_BASE 0x64000000 +#define DAVINCI_ASYNC_EMIF_DATA_CE5_BASE 0x66000000 +#define DAVINCI_DDR_EMIF_CTRL_BASE 0xb0000000 +#define DAVINCI_DDR_EMIF_DATA_BASE 0xc0000000 +#define DAVINCI_INTC_BASE 0xfffee000 +#define DAVINCI_BOOTCFG_BASE 0x01c14000 + +#endif /* CONFIG_SOC_DA8XX */ + /* Power and Sleep Controller (PSC) Domains */ #define DAVINCI_GPSC_ARMDOMAIN 0 #define DAVINCI_GPSC_DSPDOMAIN 1 +#ifndef CONFIG_SOC_DA8XX + #define DAVINCI_LPSC_VPSSMSTR 0 #define DAVINCI_LPSC_VPSSSLV 1 #define DAVINCI_LPSC_TPCC 2 @@ -166,6 +204,52 @@ typedef volatile unsigned int * dv_reg_p; #define DAVINCI_DM646X_LPSC_UART0 26 #define DAVINCI_DM646X_LPSC_I2C 31 +#else /* CONFIG_SOC_DA8XX */ + +enum davinci_lpsc_ids { + DAVINCI_LPSC_TPCC = 0, + DAVINCI_LPSC_TPTC0, + DAVINCI_LPSC_TPTC1, + DAVINCI_LPSC_AEMIF, + DAVINCI_LPSC_SPI0, + DAVINCI_LPSC_MMC_SD, + DAVINCI_LPSC_AINTC, + DAVINCI_LPSC_ARM_RAM_ROM, + DAVINCI_LPSC_SECCTL_KEYMGR, + DAVINCI_LPSC_UART0, + DAVINCI_LPSC_SCR0, + DAVINCI_LPSC_SCR1, + DAVINCI_LPSC_SCR2, + DAVINCI_LPSC_DMAX, + DAVINCI_LPSC_ARM, + DAVINCI_LPSC_GEM, + /* for LPSCs in PSC1, offset from 32 for differentiation */ + DAVINCI_LPSC_PSC1_BASE = 32, + DAVINCI_LPSC_USB11, + DAVINCI_LPSC_USB20, + DAVINCI_LPSC_GPIO, + DAVINCI_LPSC_UHPI, + DAVINCI_LPSC_EMAC, + DAVINCI_LPSC_DDR_EMIF, + DAVINCI_LPSC_McASP0, + DAVINCI_LPSC_McASP1, + DAVINCI_LPSC_McASP2, + DAVINCI_LPSC_SPI1, + DAVINCI_LPSC_I2C1, + DAVINCI_LPSC_UART1, + DAVINCI_LPSC_UART2, + DAVINCI_LPSC_LCDC, + DAVINCI_LPSC_ePWM, + DAVINCI_LPSC_eCAP, + DAVINCI_LPSC_eQEP, + DAVINCI_LPSC_SCR_P0, + DAVINCI_LPSC_SCR_P1, + DAVINCI_LPSC_CR_P3, + DAVINCI_LPSC_L3_CBA_RAM +}; + +#endif /* CONFIG_SOC_DA8XX */ + void lpsc_on(unsigned int id); void dsp_on(void); @@ -174,6 +258,8 @@ void davinci_enable_emac(void); void davinci_enable_i2c(void); void davinci_errata_workarounds(void); +#ifndef CONFIG_SOC_DA8XX + /* Some PSC defines */ #define PSC_CHP_SHRTSW (0x01c40038) #define PSC_GBLCTL (0x01c41010) @@ -194,6 +280,39 @@ void davinci_errata_workarounds(void); #define PSC_SILVER_BULLET (0x01c41a20) +#else /* CONFIG_SOC_DA8XX */ + +#define PSC_PSC0_MODULE_ID_CNT 16 +#define PSC_PSC1_MODULE_ID_CNT 32 + +struct davinci_psc_regs { + dv_reg revid; + dv_reg rsvd0[71]; + dv_reg ptcmd; + dv_reg rsvd1; + dv_reg ptstat; + dv_reg rsvd2[437]; + union { + struct { + dv_reg mdstat[PSC_PSC0_MODULE_ID_CNT]; + dv_reg rsvd3[112]; + dv_reg mdctl[PSC_PSC0_MODULE_ID_CNT]; + } psc0; + struct { + dv_reg mdstat[PSC_PSC1_MODULE_ID_CNT]; + dv_reg rsvd3[96]; + dv_reg mdctl[PSC_PSC1_MODULE_ID_CNT]; + } psc1; + }; +}; + +#define davinci_psc0_regs ((struct davinci_psc_regs *)DAVINCI_PSC0_BASE) +#define davinci_psc1_regs ((struct davinci_psc_regs *)DAVINCI_PSC1_BASE) + +#endif /* CONFIG_SOC_DA8XX */ + +#ifndef CONFIG_SOC_DA8XX + /* Miscellania... */ #define VBPR (0x20000020) @@ -206,4 +325,122 @@ void davinci_errata_workarounds(void); #define PINMUX3 0x01c4000c #define PINMUX4 0x01c40010 +#else /* CONFIG_SOC_DA8XX */ + +struct davinci_pllc_regs { + dv_reg revid; + dv_reg rsvd1[56]; + dv_reg rstype; + dv_reg rsvd2[6]; + dv_reg pllctl; + dv_reg ocsel; + dv_reg rsvd3[2]; + dv_reg pllm; + dv_reg prediv; + dv_reg plldiv1; + dv_reg plldiv2; + dv_reg plldiv3; + dv_reg oscdiv; + dv_reg postdiv; + dv_reg rsvd4[3]; + dv_reg pllcmd; + dv_reg pllstat; + dv_reg alnctl; + dv_reg dchange; + dv_reg cken; + dv_reg ckstat; + dv_reg systat; + dv_reg rsvd5[3]; + dv_reg plldiv4; + dv_reg plldiv5; + dv_reg plldiv6; + dv_reg plldiv7; + dv_reg rsvd6[32]; + dv_reg emucnt0; + dv_reg emucnt1; +}; + +#define davinci_pllc_regs ((struct davinci_pllc_regs *)DAVINCI_PLL_CNTRL0_BASE) +#define DAVINCI_PLLC_DIV_MASK 0x1f + +/* Clock IDs */ +enum davinci_clk_ids { + DAVINCI_SPI0_CLKID = 2, + DAVINCI_UART2_CLKID = 2, + DAVINCI_MDIO_CLKID = 4, + DAVINCI_ARM_CLKID = 6, + DAVINCI_PLLM_CLKID = 0xff, + DAVINCI_PLLC_CLKID = 0x100, + DAVINCI_AUXCLK_CLKID = 0x101 +}; + +int clk_get(enum davinci_clk_ids id); + +/* Boot config */ +struct davinci_syscfg_regs { + dv_reg revid; + dv_reg rsvd[71]; + dv_reg pinmux[20]; + dv_reg suspsrc; + dv_reg chipsig; + dv_reg chipsig_clr; + dv_reg cfgchip0; + dv_reg cfgchip1; + dv_reg cfgchip2; + dv_reg cfgchip3; + dv_reg cfgchip4; +}; + +#define davinci_syscfg_regs \ + ((struct davinci_syscfg_regs *)DAVINCI_BOOTCFG_BASE) + +/* Emulation suspend bits */ +#define DAVINCI_SYSCFG_SUSPSRC_EMAC (1 << 5) +#define DAVINCI_SYSCFG_SUSPSRC_I2C (1 << 16) +#define DAVINCI_SYSCFG_SUSPSRC_SPI0 (1 << 21) +#define DAVINCI_SYSCFG_SUSPSRC_UART2 (1 << 20) +#define DAVINCI_SYSCFG_SUSPSRC_TIMER0 (1 << 27) + +/* Interrupt controller */ +struct davinci_aintc_regs { + dv_reg revid; + dv_reg cr; + dv_reg dummy0[2]; + dv_reg ger; + dv_reg dummy1[219]; + dv_reg ecr1; + dv_reg ecr2; + dv_reg ecr3; + dv_reg dummy2[1117]; + dv_reg hier; +}; + +#define davinci_aintc_regs ((struct davinci_aintc_regs *)DAVINCI_INTC_BASE) + +struct davinci_uart_ctrl_regs { + dv_reg revid1; + dv_reg revid2; + dv_reg pwremu_mgmt; + dv_reg mdr; +}; + +#define DAVINCI_UART_CTRL_BASE 0x28 +#define DAVINCI_UART0_CTRL_ADDR (DAVINCI_UART0_BASE + DAVINCI_UART_CTRL_BASE) +#define DAVINCI_UART1_CTRL_ADDR (DAVINCI_UART1_BASE + DAVINCI_UART_CTRL_BASE) +#define DAVINCI_UART2_CTRL_ADDR (DAVINCI_UART2_BASE + DAVINCI_UART_CTRL_BASE) + +#define davinci_uart0_ctrl_regs \ + ((struct davinci_uart_ctrl_regs *)DAVINCI_UART0_CTRL_ADDR) +#define davinci_uart1_ctrl_regs \ + ((struct davinci_uart_ctrl_regs *)DAVINCI_UART1_CTRL_ADDR) +#define davinci_uart2_ctrl_regs \ + ((struct davinci_uart_ctrl_regs *)DAVINCI_UART2_CTRL_ADDR) + +/* UART PWREMU_MGMT definitions */ +#define DAVINCI_UART_PWREMU_MGMT_FREE (1 << 0) +#define DAVINCI_UART_PWREMU_MGMT_URRST (1 << 13) +#define DAVINCI_UART_PWREMU_MGMT_UTRST (1 << 14) + +#endif /* CONFIG_SOC_DA8XX */ + #endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/include/asm-arm/arch-davinci/i2c_defs.h b/include/asm-arm/arch-davinci/i2c_defs.h index 2e902e1..24cd268 100644 --- a/include/asm-arm/arch-davinci/i2c_defs.h +++ b/include/asm-arm/arch-davinci/i2c_defs.h @@ -28,7 +28,11 @@ #define I2C_WRITE 0 #define I2C_READ 1 +#ifndef CONFIG_SOC_DA8XX #define I2C_BASE 0x01c21000 +#else +#define I2C_BASE 0x01c22000 +#endif #define I2C_OA (I2C_BASE + 0x00) #define I2C_IE (I2C_BASE + 0x04) @@ -88,6 +92,7 @@ #define I2C_CON_XA (1 << 8) /* Expand address */ #define I2C_CON_STP (1 << 11) /* Stop condition (master mode only) */ #define I2C_CON_STT (1 << 13) /* Start condition (master mode only) */ +#define I2C_CON_FREE (1 << 14) /* Free run on emulation */ #define I2C_TIMEOUT 0xffff0000 /* Timeout mask for poll_i2c_irq() */ diff --git a/include/asm-arm/arch-omap24xx/i2c.h b/include/asm-arm/arch-omap24xx/i2c.h index 44db7a2..19046aa 100644 --- a/include/asm-arm/arch-omap24xx/i2c.h +++ b/include/asm-arm/arch-omap24xx/i2c.h @@ -23,24 +23,45 @@ #ifndef _OMAP24XX_I2C_H_ #define _OMAP24XX_I2C_H_ -#define I2C_BASE 0x48070000 +#define I2C_BASE1 0x48070000 #define I2C_BASE2 0x48072000 /* nothing hooked up on h4 */ -#define I2C_REV (I2C_BASE + 0x00) -#define I2C_IE (I2C_BASE + 0x04) -#define I2C_STAT (I2C_BASE + 0x08) -#define I2C_IV (I2C_BASE + 0x0c) -#define I2C_BUF (I2C_BASE + 0x14) -#define I2C_CNT (I2C_BASE + 0x18) -#define I2C_DATA (I2C_BASE + 0x1c) -#define I2C_SYSC (I2C_BASE + 0x20) -#define I2C_CON (I2C_BASE + 0x24) -#define I2C_OA (I2C_BASE + 0x28) -#define I2C_SA (I2C_BASE + 0x2c) -#define I2C_PSC (I2C_BASE + 0x30) -#define I2C_SCLL (I2C_BASE + 0x34) -#define I2C_SCLH (I2C_BASE + 0x38) -#define I2C_SYSTEST (I2C_BASE + 0x3c) +#define I2C_DEFAULT_BASE I2C_BASE1 + +struct i2c { + unsigned short rev; /* 0x00 */ + unsigned short res1; + unsigned short ie; /* 0x04 */ + unsigned short res2; + unsigned short stat; /* 0x08 */ + unsigned short res3; + unsigned short iv; /* 0x0C */ + unsigned short res4[3]; + unsigned short buf; /* 0x14 */ + unsigned short res5; + unsigned short cnt; /* 0x18 */ + unsigned short res6; + unsigned short data; /* 0x1C */ + unsigned short res7; + unsigned short sysc; /* 0x20 */ + unsigned short res8; + unsigned short con; /* 0x24 */ + unsigned short res9; + unsigned short oa; /* 0x28 */ + unsigned short res10; + unsigned short sa; /* 0x2C */ + unsigned short res11; + unsigned short psc; /* 0x30 */ + unsigned short res12; + unsigned short scll; /* 0x34 */ + unsigned short res13; + unsigned short sclh; /* 0x38 */ + unsigned short res14; + unsigned short systest; /* 0x3c */ + unsigned short res15; +}; + +#define I2C_BUS_MAX 2 /* I2C masks */ diff --git a/include/asm-arm/arch-omap3/cpu.h b/include/asm-arm/arch-omap3/cpu.h index 8ab2e39..e51c4f3 100644 --- a/include/asm-arm/arch-omap3/cpu.h +++ b/include/asm-arm/arch-omap3/cpu.h @@ -222,6 +222,7 @@ struct sdrc { #define PAGEPOLICY_HIGH (0x1 << 0) #define SRFRONRESET (0x1 << 7) +#define PWDNEN (0x1 << 2) #define WAKEUPPROC (0x1 << 26) #define DDR_SDRAM (0x1 << 0) diff --git a/include/asm-arm/arch-omap3/i2c.h b/include/asm-arm/arch-omap3/i2c.h index 8b339cc..490e03b 100644 --- a/include/asm-arm/arch-omap3/i2c.h +++ b/include/asm-arm/arch-omap3/i2c.h @@ -25,21 +25,40 @@ #define I2C_DEFAULT_BASE I2C_BASE1 -#define I2C_REV (I2C_DEFAULT_BASE + 0x00) -#define I2C_IE (I2C_DEFAULT_BASE + 0x04) -#define I2C_STAT (I2C_DEFAULT_BASE + 0x08) -#define I2C_IV (I2C_DEFAULT_BASE + 0x0c) -#define I2C_BUF (I2C_DEFAULT_BASE + 0x14) -#define I2C_CNT (I2C_DEFAULT_BASE + 0x18) -#define I2C_DATA (I2C_DEFAULT_BASE + 0x1c) -#define I2C_SYSC (I2C_DEFAULT_BASE + 0x20) -#define I2C_CON (I2C_DEFAULT_BASE + 0x24) -#define I2C_OA (I2C_DEFAULT_BASE + 0x28) -#define I2C_SA (I2C_DEFAULT_BASE + 0x2c) -#define I2C_PSC (I2C_DEFAULT_BASE + 0x30) -#define I2C_SCLL (I2C_DEFAULT_BASE + 0x34) -#define I2C_SCLH (I2C_DEFAULT_BASE + 0x38) -#define I2C_SYSTEST (I2C_DEFAULT_BASE + 0x3c) +struct i2c { + unsigned short rev; /* 0x00 */ + unsigned short res1; + unsigned short ie; /* 0x04 */ + unsigned short res2; + unsigned short stat; /* 0x08 */ + unsigned short res3; + unsigned short iv; /* 0x0C */ + unsigned short res4[3]; + unsigned short buf; /* 0x14 */ + unsigned short res5; + unsigned short cnt; /* 0x18 */ + unsigned short res6; + unsigned short data; /* 0x1C */ + unsigned short res7; + unsigned short sysc; /* 0x20 */ + unsigned short res8; + unsigned short con; /* 0x24 */ + unsigned short res9; + unsigned short oa; /* 0x28 */ + unsigned short res10; + unsigned short sa; /* 0x2C */ + unsigned short res11; + unsigned short psc; /* 0x30 */ + unsigned short res12; + unsigned short scll; /* 0x34 */ + unsigned short res13; + unsigned short sclh; /* 0x38 */ + unsigned short res14; + unsigned short systest; /* 0x3c */ + unsigned short res15; +}; + +#define I2C_BUS_MAX 3 /* I2C masks */ diff --git a/include/asm-arm/arch-omap3/mem.h b/include/asm-arm/arch-omap3/mem.h index 5b9ac75..9439758 100644 --- a/include/asm-arm/arch-omap3/mem.h +++ b/include/asm-arm/arch-omap3/mem.h @@ -40,11 +40,8 @@ enum { #define EARLY_INIT 1 /* Slower full frequency range default timings for x32 operation*/ -#define SDP_SDRC_SHARING 0x00000100 -#define SDP_SDRC_MR_0_SDR 0x00000031 - -/* optimized timings good for current shipping parts */ -#define SDP_3430_SDRC_RFR_CTRL_165MHz 0x0004e201 /* 7.8us/6ns - 50=0x4e2 */ +#define SDRC_SHARING 0x00000100 +#define SDRC_MR_0_SDR 0x00000031 #define DLL_OFFSET 0 #define DLL_WRITEDDRCLKX2DIS 1 @@ -71,29 +68,78 @@ enum { * TCKE = 2 * XSR = 120/6 = 20 */ -#define TDAL_165 6 -#define TDPL_165 3 -#define TRRD_165 2 -#define TRCD_165 3 -#define TRP_165 3 -#define TRAS_165 7 -#define TRC_165 10 -#define TRFC_165 21 -#define V_ACTIMA_165 ((TRFC_165 << 27) | (TRC_165 << 22) | \ - (TRAS_165 << 18) | (TRP_165 << 15) | \ - (TRCD_165 << 12) | (TRRD_165 << 9) | \ - (TDPL_165 << 6) | (TDAL_165)) - -#define TWTR_165 1 -#define TCKE_165 1 -#define TXP_165 5 -#define XSR_165 23 -#define V_ACTIMB_165 (((TCKE_165 << 12) | (XSR_165 << 0)) | \ - (TXP_165 << 8) | (TWTR_165 << 16)) - -#define SDP_SDRC_ACTIM_CTRLA_0 V_ACTIMA_165 -#define SDP_SDRC_ACTIM_CTRLB_0 V_ACTIMB_165 -#define SDP_SDRC_RFR_CTRL SDP_3430_SDRC_RFR_CTRL_165MHz +#define INFINEON_TDAL_165 6 +#define INFINEON_TDPL_165 3 +#define INFINEON_TRRD_165 2 +#define INFINEON_TRCD_165 3 +#define INFINEON_TRP_165 3 +#define INFINEON_TRAS_165 7 +#define INFINEON_TRC_165 10 +#define INFINEON_TRFC_165 12 +#define INFINEON_V_ACTIMA_165 ((INFINEON_TRFC_165 << 27) | \ + (INFINEON_TRC_165 << 22) | (INFINEON_TRAS_165 << 18) | \ + (INFINEON_TRP_165 << 15) | (INFINEON_TRCD_165 << 12) | \ + (INFINEON_TRRD_165 << 9) | (INFINEON_TDPL_165 << 6) | \ + (INFINEON_TDAL_165)) + +#define INFINEON_TWTR_165 1 +#define INFINEON_TCKE_165 2 +#define INFINEON_TXP_165 2 +#define INFINEON_XSR_165 20 +#define INFINEON_V_ACTIMB_165 ((INFINEON_TCKE_165 << 12) | \ + (INFINEON_XSR_165 << 0) | (INFINEON_TXP_165 << 8) | \ + (INFINEON_TWTR_165 << 16)) + +/* Micron part of 3430 EVM (165MHz optimized) 6.06ns + * ACTIMA + * TDAL = Twr/Tck + Trp/tck= 15/6 + 18 /6 = 2.5 + 3 = 5.5 -> 6 + * TDPL (Twr) = 15/6 = 2.5 -> 3 + * TRRD = 12/6 = 2 + * TRCD = 18/6 = 3 + * TRP = 18/6 = 3 + * TRAS = 42/6 = 7 + * TRC = 60/6 = 10 + * TRFC = 125/6 = 21 + * ACTIMB + * TWTR = 1 + * TCKE = 1 + * TXSR = 138/6 = 23 + * TXP = 25/6 = 4.1 ~5 + */ +#define MICRON_TDAL_165 6 +#define MICRON_TDPL_165 3 +#define MICRON_TRRD_165 2 +#define MICRON_TRCD_165 3 +#define MICRON_TRP_165 3 +#define MICRON_TRAS_165 7 +#define MICRON_TRC_165 10 +#define MICRON_TRFC_165 21 +#define MICRON_V_ACTIMA_165 ((MICRON_TRFC_165 << 27) | \ + (MICRON_TRC_165 << 22) | (MICRON_TRAS_165 << 18) | \ + (MICRON_TRP_165 << 15) | (MICRON_TRCD_165 << 12) | \ + (MICRON_TRRD_165 << 9) | (MICRON_TDPL_165 << 6) | \ + (MICRON_TDAL_165)) + +#define MICRON_TWTR_165 1 +#define MICRON_TCKE_165 1 +#define MICRON_XSR_165 23 +#define MICRON_TXP_165 5 +#define MICRON_V_ACTIMB_165 ((MICRON_TCKE_165 << 12) | \ + (MICRON_XSR_165 << 0) | (MICRON_TXP_165 << 8) | \ + (MICRON_TWTR_165 << 16)) + +#ifdef CONFIG_OMAP3_INFINEON_DDR +#define V_ACTIMA_165 INFINEON_V_ACTIMA_165 +#define V_ACTIMB_165 INFINEON_V_ACTIMB_165 +#endif +#ifdef CONFIG_OMAP3_MICRON_DDR +#define V_ACTIMA_165 MICRON_V_ACTIMA_165 +#define V_ACTIMB_165 MICRON_V_ACTIMB_165 +#endif + +#if !defined(V_ACTIMA_165) || !defined(V_ACTIMB_165) +#error "Please choose the right DDR type in config header" +#endif /* * GPMC settings - diff --git a/include/s3c2400.h b/include/asm-arm/arch-s3c24x0/s3c2400.h index 062259d..2678be1 100644 --- a/include/s3c2400.h +++ b/include/asm-arm/arch-s3c24x0/s3c2400.h @@ -60,74 +60,90 @@ enum s3c24x0_uarts_nr { #define S3C2400_MMC_BASE 0x15A00000 /* include common stuff */ -#include <s3c24x0.h> +#include <asm/arch/s3c24x0.h> static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void) { return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE; } + static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void) { return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE; } + static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void) { return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE; } + static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void) { return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE; } + static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void) { return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE; } + static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) { return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; } + static inline struct s3c24x0_uart *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n) { return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000)); } + static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void) { return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE; } + static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void) { return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE; } + static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void) { return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE; } + static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void) { return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE; } + static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void) { return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE; } + static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void) { return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE; } + static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void) { return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE; } + static inline struct s3c2400_adc *s3c2400_get_base_adc(void) { return (struct s3c2400_adc *)S3C24X0_ADC_BASE; } + static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void) { return (struct s3c24x0_spi *)S3C24X0_SPI_BASE; } + static inline struct s3c2400_mmc *s3c2400_get_base_mmc(void) { return (struct s3c2400_mmc *)S3C2400_MMC_BASE; diff --git a/include/s3c2410.h b/include/asm-arm/arch-s3c24x0/s3c2410.h index 03b33b4..0543fe1 100644 --- a/include/s3c2410.h +++ b/include/asm-arm/arch-s3c24x0/s3c2410.h @@ -66,78 +66,95 @@ enum s3c24x0_uarts_nr { /* include common stuff */ -#include <s3c24x0.h> +#include <asm/arch/s3c24x0.h> static inline struct s3c24x0_memctl *s3c24x0_get_base_memctl(void) { return (struct s3c24x0_memctl *)S3C24X0_MEMCTL_BASE; } + static inline struct s3c24x0_usb_host *s3c24x0_get_base_usb_host(void) { return (struct s3c24x0_usb_host *)S3C24X0_USB_HOST_BASE; } + static inline struct s3c24x0_interrupt *s3c24x0_get_base_interrupt(void) { return (struct s3c24x0_interrupt *)S3C24X0_INTERRUPT_BASE; } + static inline struct s3c24x0_dmas *s3c24x0_get_base_dmas(void) { return (struct s3c24x0_dmas *)S3C24X0_DMA_BASE; } + static inline struct s3c24x0_clock_power *s3c24x0_get_base_clock_power(void) { return (struct s3c24x0_clock_power *)S3C24X0_CLOCK_POWER_BASE; } + static inline struct s3c24x0_lcd *s3c24x0_get_base_lcd(void) { return (struct s3c24x0_lcd *)S3C24X0_LCD_BASE; } + static inline struct s3c2410_nand *s3c2410_get_base_nand(void) { return (struct s3c2410_nand *)S3C2410_NAND_BASE; } + static inline struct s3c24x0_uart *s3c24x0_get_base_uart(enum s3c24x0_uarts_nr n) { return (struct s3c24x0_uart *)(S3C24X0_UART_BASE + (n * 0x4000)); } + static inline struct s3c24x0_timers *s3c24x0_get_base_timers(void) { return (struct s3c24x0_timers *)S3C24X0_TIMER_BASE; } + static inline struct s3c24x0_usb_device *s3c24x0_get_base_usb_device(void) { return (struct s3c24x0_usb_device *)S3C24X0_USB_DEVICE_BASE; } + static inline struct s3c24x0_watchdog *s3c24x0_get_base_watchdog(void) { return (struct s3c24x0_watchdog *)S3C24X0_WATCHDOG_BASE; } + static inline struct s3c24x0_i2c *s3c24x0_get_base_i2c(void) { return (struct s3c24x0_i2c *)S3C24X0_I2C_BASE; } + static inline struct s3c24x0_i2s *s3c24x0_get_base_i2s(void) { return (struct s3c24x0_i2s *)S3C24X0_I2S_BASE; } + static inline struct s3c24x0_gpio *s3c24x0_get_base_gpio(void) { return (struct s3c24x0_gpio *)S3C24X0_GPIO_BASE; } + static inline struct s3c24x0_rtc *s3c24x0_get_base_rtc(void) { return (struct s3c24x0_rtc *)S3C24X0_RTC_BASE; } + static inline struct s3c2410_adc *s3c2410_get_base_adc(void) { return (struct s3c2410_adc *)S3C2410_ADC_BASE; } + static inline struct s3c24x0_spi *s3c24x0_get_base_spi(void) { return (struct s3c24x0_spi *)S3C24X0_SPI_BASE; } + static inline struct s3c2410_sdi *s3c2410_get_base_sdi(void) { return (struct s3c2410_sdi *)S3C2410_SDI_BASE; diff --git a/include/asm-arm/arch-s3c24x0/s3c24x0.h b/include/asm-arm/arch-s3c24x0/s3c24x0.h new file mode 100644 index 0000000..15f53dd --- /dev/null +++ b/include/asm-arm/arch-s3c24x0/s3c24x0.h @@ -0,0 +1,652 @@ +/* + * (C) Copyright 2003 + * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************ + * NAME : s3c24x0.h + * Version : 31.3.2003 + * + * common stuff for SAMSUNG S3C24X0 SoC + ************************************************/ + +#ifndef __S3C24X0_H__ +#define __S3C24X0_H__ + +/* Memory controller (see manual chapter 5) */ +struct s3c24x0_memctl { + u32 BWSCON; + u32 BANKCON[8]; + u32 REFRESH; + u32 BANKSIZE; + u32 MRSRB6; + u32 MRSRB7; +}; + + +/* USB HOST (see manual chapter 12) */ +struct s3c24x0_usb_host { + u32 HcRevision; + u32 HcControl; + u32 HcCommonStatus; + u32 HcInterruptStatus; + u32 HcInterruptEnable; + u32 HcInterruptDisable; + u32 HcHCCA; + u32 HcPeriodCuttendED; + u32 HcControlHeadED; + u32 HcControlCurrentED; + u32 HcBulkHeadED; + u32 HcBuldCurrentED; + u32 HcDoneHead; + u32 HcRmInterval; + u32 HcFmRemaining; + u32 HcFmNumber; + u32 HcPeriodicStart; + u32 HcLSThreshold; + u32 HcRhDescriptorA; + u32 HcRhDescriptorB; + u32 HcRhStatus; + u32 HcRhPortStatus1; + u32 HcRhPortStatus2; +}; + + +/* INTERRUPT (see manual chapter 14) */ +struct s3c24x0_interrupt { + u32 SRCPND; + u32 INTMOD; + u32 INTMSK; + u32 PRIORITY; + u32 INTPND; + u32 INTOFFSET; +#ifdef CONFIG_S3C2410 + u32 SUBSRCPND; + u32 INTSUBMSK; +#endif +}; + + +/* DMAS (see manual chapter 8) */ +struct s3c24x0_dma { + u32 DISRC; +#ifdef CONFIG_S3C2410 + u32 DISRCC; +#endif + u32 DIDST; +#ifdef CONFIG_S3C2410 + u32 DIDSTC; +#endif + u32 DCON; + u32 DSTAT; + u32 DCSRC; + u32 DCDST; + u32 DMASKTRIG; +#ifdef CONFIG_S3C2400 + u32 res[1]; +#endif +#ifdef CONFIG_S3C2410 + u32 res[7]; +#endif +}; + +struct s3c24x0_dmas { + struct s3c24x0_dma dma[4]; +}; + + +/* CLOCK & POWER MANAGEMENT (see S3C2400 manual chapter 6) */ +/* (see S3C2410 manual chapter 7) */ +struct s3c24x0_clock_power { + u32 LOCKTIME; + u32 MPLLCON; + u32 UPLLCON; + u32 CLKCON; + u32 CLKSLOW; + u32 CLKDIVN; +}; + + +/* LCD CONTROLLER (see manual chapter 15) */ +struct s3c24x0_lcd { + u32 LCDCON1; + u32 LCDCON2; + u32 LCDCON3; + u32 LCDCON4; + u32 LCDCON5; + u32 LCDSADDR1; + u32 LCDSADDR2; + u32 LCDSADDR3; + u32 REDLUT; + u32 GREENLUT; + u32 BLUELUT; + u32 res[8]; + u32 DITHMODE; + u32 TPAL; +#ifdef CONFIG_S3C2410 + u32 LCDINTPND; + u32 LCDSRCPND; + u32 LCDINTMSK; + u32 LPCSEL; +#endif +}; + + +/* NAND FLASH (see S3C2410 manual chapter 6) */ +struct s3c2410_nand { + u32 NFCONF; + u32 NFCMD; + u32 NFADDR; + u32 NFDATA; + u32 NFSTAT; + u32 NFECC; +}; + + +/* UART (see manual chapter 11) */ +struct s3c24x0_uart { + u32 ULCON; + u32 UCON; + u32 UFCON; + u32 UMCON; + u32 UTRSTAT; + u32 UERSTAT; + u32 UFSTAT; + u32 UMSTAT; +#ifdef __BIG_ENDIAN + u8 res1[3]; + u8 UTXH; + u8 res2[3]; + u8 URXH; +#else /* Little Endian */ + u8 UTXH; + u8 res1[3]; + u8 URXH; + u8 res2[3]; +#endif + u32 UBRDIV; +}; + + +/* PWM TIMER (see manual chapter 10) */ +struct s3c24x0_timer { + u32 TCNTB; + u32 TCMPB; + u32 TCNTO; +}; + +struct s3c24x0_timers { + u32 TCFG0; + u32 TCFG1; + u32 TCON; + struct s3c24x0_timer ch[4]; + u32 TCNTB4; + u32 TCNTO4; +}; + + +/* USB DEVICE (see manual chapter 13) */ +struct s3c24x0_usb_dev_fifos { +#ifdef __BIG_ENDIAN + u8 res[3]; + u8 EP_FIFO_REG; +#else /* little endian */ + u8 EP_FIFO_REG; + u8 res[3]; +#endif +}; + +struct s3c24x0_usb_dev_dmas { +#ifdef __BIG_ENDIAN + u8 res1[3]; + u8 EP_DMA_CON; + u8 res2[3]; + u8 EP_DMA_UNIT; + u8 res3[3]; + u8 EP_DMA_FIFO; + u8 res4[3]; + u8 EP_DMA_TTC_L; + u8 res5[3]; + u8 EP_DMA_TTC_M; + u8 res6[3]; + u8 EP_DMA_TTC_H; +#else /* little endian */ + u8 EP_DMA_CON; + u8 res1[3]; + u8 EP_DMA_UNIT; + u8 res2[3]; + u8 EP_DMA_FIFO; + u8 res3[3]; + u8 EP_DMA_TTC_L; + u8 res4[3]; + u8 EP_DMA_TTC_M; + u8 res5[3]; + u8 EP_DMA_TTC_H; + u8 res6[3]; +#endif +}; + +struct s3c24x0_usb_device { +#ifdef __BIG_ENDIAN + u8 res1[3]; + u8 FUNC_ADDR_REG; + u8 res2[3]; + u8 PWR_REG; + u8 res3[3]; + u8 EP_INT_REG; + u8 res4[15]; + u8 USB_INT_REG; + u8 res5[3]; + u8 EP_INT_EN_REG; + u8 res6[15]; + u8 USB_INT_EN_REG; + u8 res7[3]; + u8 FRAME_NUM1_REG; + u8 res8[3]; + u8 FRAME_NUM2_REG; + u8 res9[3]; + u8 INDEX_REG; + u8 res10[7]; + u8 MAXP_REG; + u8 res11[3]; + u8 EP0_CSR_IN_CSR1_REG; + u8 res12[3]; + u8 IN_CSR2_REG; + u8 res13[7]; + u8 OUT_CSR1_REG; + u8 res14[3]; + u8 OUT_CSR2_REG; + u8 res15[3]; + u8 OUT_FIFO_CNT1_REG; + u8 res16[3]; + u8 OUT_FIFO_CNT2_REG; +#else /* little endian */ + u8 FUNC_ADDR_REG; + u8 res1[3]; + u8 PWR_REG; + u8 res2[3]; + u8 EP_INT_REG; + u8 res3[15]; + u8 USB_INT_REG; + u8 res4[3]; + u8 EP_INT_EN_REG; + u8 res5[15]; + u8 USB_INT_EN_REG; + u8 res6[3]; + u8 FRAME_NUM1_REG; + u8 res7[3]; + u8 FRAME_NUM2_REG; + u8 res8[3]; + u8 INDEX_REG; + u8 res9[7]; + u8 MAXP_REG; + u8 res10[7]; + u8 EP0_CSR_IN_CSR1_REG; + u8 res11[3]; + u8 IN_CSR2_REG; + u8 res12[3]; + u8 OUT_CSR1_REG; + u8 res13[7]; + u8 OUT_CSR2_REG; + u8 res14[3]; + u8 OUT_FIFO_CNT1_REG; + u8 res15[3]; + u8 OUT_FIFO_CNT2_REG; + u8 res16[3]; +#endif /* __BIG_ENDIAN */ + struct s3c24x0_usb_dev_fifos fifo[5]; + struct s3c24x0_usb_dev_dmas dma[5]; +}; + + +/* WATCH DOG TIMER (see manual chapter 18) */ +struct s3c24x0_watchdog { + u32 WTCON; + u32 WTDAT; + u32 WTCNT; +}; + + +/* IIC (see manual chapter 20) */ +struct s3c24x0_i2c { + u32 IICCON; + u32 IICSTAT; + u32 IICADD; + u32 IICDS; +}; + + +/* IIS (see manual chapter 21) */ +struct s3c24x0_i2s { +#ifdef __BIG_ENDIAN + u16 res1; + u16 IISCON; + u16 res2; + u16 IISMOD; + u16 res3; + u16 IISPSR; + u16 res4; + u16 IISFCON; + u16 res5; + u16 IISFIFO; +#else /* little endian */ + u16 IISCON; + u16 res1; + u16 IISMOD; + u16 res2; + u16 IISPSR; + u16 res3; + u16 IISFCON; + u16 res4; + u16 IISFIFO; + u16 res5; +#endif +}; + + +/* I/O PORT (see manual chapter 9) */ +struct s3c24x0_gpio { +#ifdef CONFIG_S3C2400 + u32 PACON; + u32 PADAT; + + u32 PBCON; + u32 PBDAT; + u32 PBUP; + + u32 PCCON; + u32 PCDAT; + u32 PCUP; + + u32 PDCON; + u32 PDDAT; + u32 PDUP; + + u32 PECON; + u32 PEDAT; + u32 PEUP; + + u32 PFCON; + u32 PFDAT; + u32 PFUP; + + u32 PGCON; + u32 PGDAT; + u32 PGUP; + + u32 OPENCR; + + u32 MISCCR; + u32 EXTINT; +#endif +#ifdef CONFIG_S3C2410 + u32 GPACON; + u32 GPADAT; + u32 res1[2]; + u32 GPBCON; + u32 GPBDAT; + u32 GPBUP; + u32 res2; + u32 GPCCON; + u32 GPCDAT; + u32 GPCUP; + u32 res3; + u32 GPDCON; + u32 GPDDAT; + u32 GPDUP; + u32 res4; + u32 GPECON; + u32 GPEDAT; + u32 GPEUP; + u32 res5; + u32 GPFCON; + u32 GPFDAT; + u32 GPFUP; + u32 res6; + u32 GPGCON; + u32 GPGDAT; + u32 GPGUP; + u32 res7; + u32 GPHCON; + u32 GPHDAT; + u32 GPHUP; + u32 res8; + + u32 MISCCR; + u32 DCLKCON; + u32 EXTINT0; + u32 EXTINT1; + u32 EXTINT2; + u32 EINTFLT0; + u32 EINTFLT1; + u32 EINTFLT2; + u32 EINTFLT3; + u32 EINTMASK; + u32 EINTPEND; + u32 GSTATUS0; + u32 GSTATUS1; + u32 GSTATUS2; + u32 GSTATUS3; + u32 GSTATUS4; +#endif +}; + + +/* RTC (see manual chapter 17) */ +struct s3c24x0_rtc { +#ifdef __BIG_ENDIAN + u8 res1[67]; + u8 RTCCON; + u8 res2[3]; + u8 TICNT; + u8 res3[11]; + u8 RTCALM; + u8 res4[3]; + u8 ALMSEC; + u8 res5[3]; + u8 ALMMIN; + u8 res6[3]; + u8 ALMHOUR; + u8 res7[3]; + u8 ALMDATE; + u8 res8[3]; + u8 ALMMON; + u8 res9[3]; + u8 ALMYEAR; + u8 res10[3]; + u8 RTCRST; + u8 res11[3]; + u8 BCDSEC; + u8 res12[3]; + u8 BCDMIN; + u8 res13[3]; + u8 BCDHOUR; + u8 res14[3]; + u8 BCDDATE; + u8 res15[3]; + u8 BCDDAY; + u8 res16[3]; + u8 BCDMON; + u8 res17[3]; + u8 BCDYEAR; +#else /* little endian */ + u8 res0[64]; + u8 RTCCON; + u8 res1[3]; + u8 TICNT; + u8 res2[11]; + u8 RTCALM; + u8 res3[3]; + u8 ALMSEC; + u8 res4[3]; + u8 ALMMIN; + u8 res5[3]; + u8 ALMHOUR; + u8 res6[3]; + u8 ALMDATE; + u8 res7[3]; + u8 ALMMON; + u8 res8[3]; + u8 ALMYEAR; + u8 res9[3]; + u8 RTCRST; + u8 res10[3]; + u8 BCDSEC; + u8 res11[3]; + u8 BCDMIN; + u8 res12[3]; + u8 BCDHOUR; + u8 res13[3]; + u8 BCDDATE; + u8 res14[3]; + u8 BCDDAY; + u8 res15[3]; + u8 BCDMON; + u8 res16[3]; + u8 BCDYEAR; + u8 res17[3]; +#endif +}; + + +/* ADC (see manual chapter 16) */ +struct s3c2400_adc { + u32 ADCCON; + u32 ADCDAT; +}; + + +/* ADC (see manual chapter 16) */ +struct s3c2410_adc { + u32 ADCCON; + u32 ADCTSC; + u32 ADCDLY; + u32 ADCDAT0; + u32 ADCDAT1; +}; + + +/* SPI (see manual chapter 22) */ +struct s3c24x0_spi_channel { + u8 SPCON; + u8 res1[3]; + u8 SPSTA; + u8 res2[3]; + u8 SPPIN; + u8 res3[3]; + u8 SPPRE; + u8 res4[3]; + u8 SPTDAT; + u8 res5[3]; + u8 SPRDAT; + u8 res6[3]; + u8 res7[16]; +}; + +struct s3c24x0_spi { + struct s3c24x0_spi_channel ch[S3C24X0_SPI_CHANNELS]; +}; + + +/* MMC INTERFACE (see S3C2400 manual chapter 19) */ +struct s3c2400_mmc { +#ifdef __BIG_ENDIAN + u8 res1[3]; + u8 MMCON; + u8 res2[3]; + u8 MMCRR; + u8 res3[3]; + u8 MMFCON; + u8 res4[3]; + u8 MMSTA; + u16 res5; + u16 MMFSTA; + u8 res6[3]; + u8 MMPRE; + u16 res7; + u16 MMLEN; + u8 res8[3]; + u8 MMCR7; + u32 MMRSP[4]; + u8 res9[3]; + u8 MMCMD0; + u32 MMCMD1; + u16 res10; + u16 MMCR16; + u8 res11[3]; + u8 MMDAT; +#else + u8 MMCON; + u8 res1[3]; + u8 MMCRR; + u8 res2[3]; + u8 MMFCON; + u8 res3[3]; + u8 MMSTA; + u8 res4[3]; + u16 MMFSTA; + u16 res5; + u8 MMPRE; + u8 res6[3]; + u16 MMLEN; + u16 res7; + u8 MMCR7; + u8 res8[3]; + u32 MMRSP[4]; + u8 MMCMD0; + u8 res9[3]; + u32 MMCMD1; + u16 MMCR16; + u16 res10; + u8 MMDAT; + u8 res11[3]; +#endif +}; + + +/* SD INTERFACE (see S3C2410 manual chapter 19) */ +struct s3c2410_sdi { + u32 SDICON; + u32 SDIPRE; + u32 SDICARG; + u32 SDICCON; + u32 SDICSTA; + u32 SDIRSP0; + u32 SDIRSP1; + u32 SDIRSP2; + u32 SDIRSP3; + u32 SDIDTIMER; + u32 SDIBSIZE; + u32 SDIDCON; + u32 SDIDCNT; + u32 SDIDSTA; + u32 SDIFSTA; +#ifdef __BIG_ENDIAN + u8 res[3]; + u8 SDIDAT; +#else + u8 SDIDAT; + u8 res[3]; +#endif + u32 SDIIMSK; +}; + +#endif /*__S3C24X0_H__*/ diff --git a/include/asm-arm/arch-s3c24x0/s3c24x0_cpu.h b/include/asm-arm/arch-s3c24x0/s3c24x0_cpu.h new file mode 100644 index 0000000..c37d4a1 --- /dev/null +++ b/include/asm-arm/arch-s3c24x0/s3c24x0_cpu.h @@ -0,0 +1,27 @@ +/* + * (C) Copyright 2009 + * Kevin Morfitt, Fearnside Systems Ltd, <kevin.morfitt@fearnside-systems.co.uk> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifdef CONFIG_S3C2400 + #include <asm/arch/s3c2400.h> +#elif defined CONFIG_S3C2410 + #include <asm/arch/s3c2410.h> +#else + #error Please define the s3c24x0 cpu type +#endif diff --git a/include/s3c6400.h b/include/asm-arm/arch-s3c64xx/s3c6400.h index e527c08..e527c08 100644 --- a/include/s3c6400.h +++ b/include/asm-arm/arch-s3c64xx/s3c6400.h diff --git a/include/s3c64x0.h b/include/asm-arm/arch-s3c64xx/s3c64x0.h index 0bbf1d0..0bbf1d0 100644 --- a/include/s3c64x0.h +++ b/include/asm-arm/arch-s3c64xx/s3c64x0.h diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h index 6c1f5ac..f1f7d93 100644 --- a/include/asm-arm/mach-types.h +++ b/include/asm-arm/mach-types.h @@ -1,9 +1,6 @@ /* - * This was automagically generated from mach-types! + * This was automagically generated from arch/arm/tools/mach-types! * Do NOT edit - * - * Last update: Fri Sep 4 22:16:22 2009 - * */ #ifndef __ASM_ARM_MACH_TYPE_H @@ -1637,7 +1634,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_AML_M8050 1644 #define MACH_TYPE_MX35_3DS 1645 #define MACH_TYPE_MARS 1646 -#define MACH_TYPE_NTOSD_644XA 1647 +#define MACH_TYPE_NEUROS_OSD2 1647 #define MACH_TYPE_BADGER 1648 #define MACH_TYPE_TRIZEPS4WL 1649 #define MACH_TYPE_TRIZEPS5 1650 @@ -1653,7 +1650,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_ZORAN43XX 1660 #define MACH_TYPE_SONIX926 1661 #define MACH_TYPE_CELESTIALSEMI 1662 -#define MACH_TYPE_CC9M2443 1663 +#define MACH_TYPE_CC9M2443JS 1663 #define MACH_TYPE_TW5334 1664 #define MACH_TYPE_HTCARTEMIS 1665 #define MACH_TYPE_NAL_HLITE 1666 @@ -1775,6 +1772,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_WDG002 1785 #define MACH_TYPE_SG560ADSL 1786 #define MACH_TYPE_NEXTIO_N2800_ICA 1787 +#define MACH_TYPE_MACH_MARVELL_NEW1 1788 #define MACH_TYPE_MARVELL_NEWDB 1789 #define MACH_TYPE_VANDIHUD 1790 #define MACH_TYPE_MAGX_E8 1791 @@ -1801,7 +1799,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_RD88F5181L_GE 1812 #define MACH_TYPE_SIFMAIN 1813 #define MACH_TYPE_SAM9_L9261 1814 -#define MACH_TYPE_CC9M2443JS 1815 +#define MACH_TYPE_CC9M2443 1815 #define MACH_TYPE_XARIA300 1816 #define MACH_TYPE_IT9200 1817 #define MACH_TYPE_RD88F5181L_FXO 1818 @@ -2401,6 +2399,154 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_MULTIBUS_MASTER 2416 #define MACH_TYPE_MULTIBUS_PBK 2417 #define MACH_TYPE_TNETV107X 2418 +#define MACH_TYPE_SNAKE 2419 +#define MACH_TYPE_CWMX27 2420 +#define MACH_TYPE_SCH_M480 2421 +#define MACH_TYPE_PLATYPUS 2422 +#define MACH_TYPE_PSS2 2423 +#define MACH_TYPE_DAVINCI_APM150 2424 +#define MACH_TYPE_STR9100 2425 +#define MACH_TYPE_NET5BIG 2426 +#define MACH_TYPE_SEABED9263 2427 +#define MACH_TYPE_MX51_M2ID 2428 +#define MACH_TYPE_OCTVOCPLUS_EB 2429 +#define MACH_TYPE_KLK_FIREFOX 2430 +#define MACH_TYPE_KLK_WIRMA_MODULE 2431 +#define MACH_TYPE_KLK_WIRMA_MMI 2432 +#define MACH_TYPE_SUPERSONIC 2433 +#define MACH_TYPE_LIBERTY 2434 +#define MACH_TYPE_MH355 2435 +#define MACH_TYPE_PC7802 2436 +#define MACH_TYPE_GNET_SGC 2437 +#define MACH_TYPE_EINSTEIN15 2438 +#define MACH_TYPE_CMPD 2439 +#define MACH_TYPE_DAVINCI_HASE1 2440 +#define MACH_TYPE_LGEINCITEPHONE 2441 +#define MACH_TYPE_EA313X 2442 +#define MACH_TYPE_FWBD_39064 2443 +#define MACH_TYPE_FWBD_390128 2444 +#define MACH_TYPE_PELCO_MOE 2445 +#define MACH_TYPE_MINIMIX27 2446 +#define MACH_TYPE_OMAP3_THUNDER 2447 +#define MACH_TYPE_PASSIONC 2448 +#define MACH_TYPE_MX27AMATA 2449 +#define MACH_TYPE_BGAT1 2450 +#define MACH_TYPE_BUZZ 2451 +#define MACH_TYPE_MB9G20 2452 +#define MACH_TYPE_YUSHAN 2453 +#define MACH_TYPE_LIZARD 2454 +#define MACH_TYPE_OMAP3POLYCOM 2455 +#define MACH_TYPE_SMDKV210 2456 +#define MACH_TYPE_BRAVO 2457 +#define MACH_TYPE_SIOGENTOO1 2458 +#define MACH_TYPE_SIOGENTOO2 2459 +#define MACH_TYPE_SM3K 2460 +#define MACH_TYPE_ACER_TEMPO_F900 2461 +#define MACH_TYPE_SST61VC010_DEV 2462 +#define MACH_TYPE_GLITTERTIND 2463 +#define MACH_TYPE_OMAP_ZOOM3 2464 +#define MACH_TYPE_OMAP_3630SDP 2465 +#define MACH_TYPE_CYBOOK2440 2466 +#define MACH_TYPE_TORINO_S 2467 +#define MACH_TYPE_HAVANA 2468 +#define MACH_TYPE_BEAUMONT_11 2469 +#define MACH_TYPE_VANGUARD 2470 +#define MACH_TYPE_S5PC110_DRACO 2471 +#define MACH_TYPE_CARTESIO_TWO 2472 +#define MACH_TYPE_ASTER 2473 +#define MACH_TYPE_VOGUESV210 2474 +#define MACH_TYPE_ACM500X 2475 +#define MACH_TYPE_KM9260 2476 +#define MACH_TYPE_NIDEFLEXG1 2477 +#define MACH_TYPE_CTERA_PLUG_IO 2478 +#define MACH_TYPE_SMARTQ7 2479 +#define MACH_TYPE_AT91SAM9G10EK2 2480 +#define MACH_TYPE_ASUSP527 2481 +#define MACH_TYPE_AT91SAM9G20MPM2 2482 +#define MACH_TYPE_TOPASA900 2483 +#define MACH_TYPE_ELECTRUM_100 2484 +#define MACH_TYPE_MX51GRB 2485 +#define MACH_TYPE_XEA300 2486 +#define MACH_TYPE_HTCSTARTREK 2487 +#define MACH_TYPE_LIMA 2488 +#define MACH_TYPE_CSB740 2489 +#define MACH_TYPE_USB_S8815 2490 +#define MACH_TYPE_WATSON_EFM_PLUGIN 2491 +#define MACH_TYPE_MILKYWAY 2492 +#define MACH_TYPE_G4EVM 2493 +#define MACH_TYPE_PICOMOD6 2494 +#define MACH_TYPE_OMAPL138_HAWKBOARD 2495 +#define MACH_TYPE_IP6000 2496 +#define MACH_TYPE_IP6010 2497 +#define MACH_TYPE_UTM400 2498 +#define MACH_TYPE_OMAP3_ZYBEX 2499 +#define MACH_TYPE_WIRELESS_SPACE 2500 +#define MACH_TYPE_SX560 2501 +#define MACH_TYPE_TS41X 2502 +#define MACH_TYPE_ELPHEL10373 2503 +#define MACH_TYPE_RHOBOT 2504 +#define MACH_TYPE_MX51_REFRESH 2505 +#define MACH_TYPE_LS9260 2506 +#define MACH_TYPE_SHANK 2507 +#define MACH_TYPE_QSD8X50_ST1 2508 +#define MACH_TYPE_AT91SAM9M10EKES 2509 +#define MACH_TYPE_HIRAM 2510 +#define MACH_TYPE_PHY3250 2511 +#define MACH_TYPE_EA3250 2512 +#define MACH_TYPE_FDI3250 2513 +#define MACH_TYPE_WHITESTONE 2514 +#define MACH_TYPE_AT91SAM9263NIT 2515 +#define MACH_TYPE_CCMX51 2516 +#define MACH_TYPE_CCMX51JS 2517 +#define MACH_TYPE_CCWMX51 2518 +#define MACH_TYPE_CCWMX51JS 2519 +#define MACH_TYPE_MINI6410 2520 +#define MACH_TYPE_TINY6410 2521 +#define MACH_TYPE_NANO6410 2522 +#define MACH_TYPE_AT572D940HFNLDB 2523 +#define MACH_TYPE_HTCLEO 2524 +#define MACH_TYPE_AVP13 2525 +#define MACH_TYPE_XXSVIDEOD 2526 +#define MACH_TYPE_VPNEXT 2527 +#define MACH_TYPE_SWARCO_ITC3 2528 +#define MACH_TYPE_TX51 2529 +#define MACH_TYPE_DOLBY_CAT1021 2530 +#define MACH_TYPE_MX28EVK 2531 +#define MACH_TYPE_PHOENIX260 2532 +#define MACH_TYPE_UVACA_STORK 2533 +#define MACH_TYPE_SMARTQ5 2534 +#define MACH_TYPE_ALL3078 2535 +#define MACH_TYPE_CTERA_2BAY_DS 2536 +#define MACH_TYPE_SIOGENTOO3 2537 +#define MACH_TYPE_EPB5000 2538 +#define MACH_TYPE_HY9263 2539 +#define MACH_TYPE_ACER_TEMPO_M900 2540 +#define MACH_TYPE_ACER_TEMPO_DX900 2541 +#define MACH_TYPE_ACER_TEMPO_X960 2542 +#define MACH_TYPE_ACER_ETEN_V900 2543 +#define MACH_TYPE_ACER_ETEN_X900 2544 +#define MACH_TYPE_BONNELL 2545 +#define MACH_TYPE_OHT_MX27 2546 +#define MACH_TYPE_HTCQUARTZ 2547 +#define MACH_TYPE_DAVINCI_DM6467TEVM 2548 +#define MACH_TYPE_C3AX03 2549 +#define MACH_TYPE_MXT_TD60 2550 +#define MACH_TYPE_ESYX 2551 +#define MACH_TYPE_DOVE_DB 2552 +#define MACH_TYPE_BULLDOG 2553 +#define MACH_TYPE_DERELL_ME2000 2554 +#define MACH_TYPE_BCMRING_BASE 2555 +#define MACH_TYPE_BCMRING_EVM 2556 +#define MACH_TYPE_BCMRING_EVM_JAZZ 2557 +#define MACH_TYPE_BCMRING_SP 2558 +#define MACH_TYPE_BCMRING_SV 2559 +#define MACH_TYPE_BCMRING_SV_JAZZ 2560 +#define MACH_TYPE_BCMRING_TABLET 2561 +#define MACH_TYPE_BCMRING_VP 2562 +#define MACH_TYPE_BCMRING_EVM_SEIKOR 2563 +#define MACH_TYPE_BCMRING_SP_WQVGA 2564 +#define MACH_TYPE_BCMRING_CUSTOM 2565 +#define MACH_TYPE_ACER_S200 2566 #ifdef CONFIG_ARCH_EBSA110 # ifdef machine_arch_type @@ -13353,9 +13499,9 @@ extern unsigned int __machine_arch_type; # else # define machine_arch_type MACH_TYPE_REA_2D # endif -# define machine_is_rea_2d() (machine_arch_type == MACH_TYPE_REA_2D) +# define machine_is_rea_cpu2() (machine_arch_type == MACH_TYPE_REA_2D) #else -# define machine_is_rea_2d() (0) +# define machine_is_rea_cpu2() (0) #endif #ifdef CONFIG_MACH_TI3E524 @@ -21866,16 +22012,16 @@ extern unsigned int __machine_arch_type; # define machine_is_mars() (0) #endif -#ifdef CONFIG_MACH_NTOSD_644XA +#ifdef CONFIG_MACH_NEUROS_OSD2 # ifdef machine_arch_type # undef machine_arch_type # define machine_arch_type __machine_arch_type # else -# define machine_arch_type MACH_TYPE_NTOSD_644XA +# define machine_arch_type MACH_TYPE_NEUROS_OSD2 # endif -# define machine_is_ntosd_644xa() (machine_arch_type == MACH_TYPE_NTOSD_644XA) +# define machine_is_neuros_osd2() (machine_arch_type == MACH_TYPE_NEUROS_OSD2) #else -# define machine_is_ntosd_644xa() (0) +# define machine_is_neuros_osd2() (0) #endif #ifdef CONFIG_MACH_BADGER @@ -22058,16 +22204,16 @@ extern unsigned int __machine_arch_type; # define machine_is_celestialsemi() (0) #endif -#ifdef CONFIG_MACH_CC9M2443 +#ifdef CONFIG_MACH_CC9M2443JS # ifdef machine_arch_type # undef machine_arch_type # define machine_arch_type __machine_arch_type # else -# define machine_arch_type MACH_TYPE_CC9M2443 +# define machine_arch_type MACH_TYPE_CC9M2443JS # endif -# define machine_is_cc9m2443() (machine_arch_type == MACH_TYPE_CC9M2443) +# define machine_is_cc9m2443js() (machine_arch_type == MACH_TYPE_CC9M2443JS) #else -# define machine_is_cc9m2443() (0) +# define machine_is_cc9m2443js() (0) #endif #ifdef CONFIG_MACH_TW5334 @@ -23522,6 +23668,18 @@ extern unsigned int __machine_arch_type; # define machine_is_nextio_n2800_ica() (0) #endif +#ifdef CONFIG_MACH_MACH_MARVELL_NEW1 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MACH_MARVELL_NEW1 +# endif +# define machine_is_dove_db() (machine_arch_type == MACH_TYPE_MACH_MARVELL_NEW1) +#else +# define machine_is_dove_db() (0) +#endif + #ifdef CONFIG_MACH_MARVELL_NEWDB # ifdef machine_arch_type # undef machine_arch_type @@ -23834,16 +23992,16 @@ extern unsigned int __machine_arch_type; # define machine_is_sam9_l9261() (0) #endif -#ifdef CONFIG_MACH_CC9M2443JS +#ifdef CONFIG_MACH_CC9M2443 # ifdef machine_arch_type # undef machine_arch_type # define machine_arch_type __machine_arch_type # else -# define machine_arch_type MACH_TYPE_CC9M2443JS +# define machine_arch_type MACH_TYPE_CC9M2443 # endif -# define machine_is_cc9m2443js() (machine_arch_type == MACH_TYPE_CC9M2443JS) +# define machine_is_cc9m2443() (machine_arch_type == MACH_TYPE_CC9M2443) #else -# define machine_is_cc9m2443js() (0) +# define machine_is_cc9m2443() (0) #endif #ifdef CONFIG_MACH_XARIA300 @@ -31034,6 +31192,1782 @@ extern unsigned int __machine_arch_type; # define machine_is_tnetv107x() (0) #endif +#ifdef CONFIG_MACH_SNAKE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SNAKE +# endif +# define machine_is_snake() (machine_arch_type == MACH_TYPE_SNAKE) +#else +# define machine_is_snake() (0) +#endif + +#ifdef CONFIG_MACH_CWMX27 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CWMX27 +# endif +# define machine_is_cwmx27() (machine_arch_type == MACH_TYPE_CWMX27) +#else +# define machine_is_cwmx27() (0) +#endif + +#ifdef CONFIG_MACH_SCH_M480 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SCH_M480 +# endif +# define machine_is_sch_m480() (machine_arch_type == MACH_TYPE_SCH_M480) +#else +# define machine_is_sch_m480() (0) +#endif + +#ifdef CONFIG_MACH_PLATYPUS +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PLATYPUS +# endif +# define machine_is_platypus() (machine_arch_type == MACH_TYPE_PLATYPUS) +#else +# define machine_is_platypus() (0) +#endif + +#ifdef CONFIG_MACH_PSS2 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PSS2 +# endif +# define machine_is_pss2() (machine_arch_type == MACH_TYPE_PSS2) +#else +# define machine_is_pss2() (0) +#endif + +#ifdef CONFIG_MACH_DAVINCI_APM150 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DAVINCI_APM150 +# endif +# define machine_is_davinci_apm150() (machine_arch_type == MACH_TYPE_DAVINCI_APM150) +#else +# define machine_is_davinci_apm150() (0) +#endif + +#ifdef CONFIG_MACH_STR9100 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_STR9100 +# endif +# define machine_is_str9100() (machine_arch_type == MACH_TYPE_STR9100) +#else +# define machine_is_str9100() (0) +#endif + +#ifdef CONFIG_MACH_NET5BIG +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NET5BIG +# endif +# define machine_is_net5big() (machine_arch_type == MACH_TYPE_NET5BIG) +#else +# define machine_is_net5big() (0) +#endif + +#ifdef CONFIG_MACH_SEABED9263 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SEABED9263 +# endif +# define machine_is_seabed9263() (machine_arch_type == MACH_TYPE_SEABED9263) +#else +# define machine_is_seabed9263() (0) +#endif + +#ifdef CONFIG_MACH_MX51_M2ID +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MX51_M2ID +# endif +# define machine_is_mx51_m2id() (machine_arch_type == MACH_TYPE_MX51_M2ID) +#else +# define machine_is_mx51_m2id() (0) +#endif + +#ifdef CONFIG_MACH_OCTVOCPLUS_EB +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OCTVOCPLUS_EB +# endif +# define machine_is_octvocplus_eb() (machine_arch_type == MACH_TYPE_OCTVOCPLUS_EB) +#else +# define machine_is_octvocplus_eb() (0) +#endif + +#ifdef CONFIG_MACH_KLK_FIREFOX +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_KLK_FIREFOX +# endif +# define machine_is_klk_firefox() (machine_arch_type == MACH_TYPE_KLK_FIREFOX) +#else +# define machine_is_klk_firefox() (0) +#endif + +#ifdef CONFIG_MACH_KLK_WIRMA_MODULE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_KLK_WIRMA_MODULE +# endif +# define machine_is_klk_wirma_module() (machine_arch_type == MACH_TYPE_KLK_WIRMA_MODULE) +#else +# define machine_is_klk_wirma_module() (0) +#endif + +#ifdef CONFIG_MACH_KLK_WIRMA_MMI +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_KLK_WIRMA_MMI +# endif +# define machine_is_klk_wirma_mmi() (machine_arch_type == MACH_TYPE_KLK_WIRMA_MMI) +#else +# define machine_is_klk_wirma_mmi() (0) +#endif + +#ifdef CONFIG_MACH_SUPERSONIC +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SUPERSONIC +# endif +# define machine_is_supersonic() (machine_arch_type == MACH_TYPE_SUPERSONIC) +#else +# define machine_is_supersonic() (0) +#endif + +#ifdef CONFIG_MACH_LIBERTY +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_LIBERTY +# endif +# define machine_is_liberty() (machine_arch_type == MACH_TYPE_LIBERTY) +#else +# define machine_is_liberty() (0) +#endif + +#ifdef CONFIG_MACH_MH355 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MH355 +# endif +# define machine_is_mh355() (machine_arch_type == MACH_TYPE_MH355) +#else +# define machine_is_mh355() (0) +#endif + +#ifdef CONFIG_MACH_PC7802 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PC7802 +# endif +# define machine_is_pc7802() (machine_arch_type == MACH_TYPE_PC7802) +#else +# define machine_is_pc7802() (0) +#endif + +#ifdef CONFIG_MACH_GNET_SGC +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_GNET_SGC +# endif +# define machine_is_gnet_sgc() (machine_arch_type == MACH_TYPE_GNET_SGC) +#else +# define machine_is_gnet_sgc() (0) +#endif + +#ifdef CONFIG_MACH_EINSTEIN15 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_EINSTEIN15 +# endif +# define machine_is_einstein15() (machine_arch_type == MACH_TYPE_EINSTEIN15) +#else +# define machine_is_einstein15() (0) +#endif + +#ifdef CONFIG_MACH_CMPD +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CMPD +# endif +# define machine_is_cmpd() (machine_arch_type == MACH_TYPE_CMPD) +#else +# define machine_is_cmpd() (0) +#endif + +#ifdef CONFIG_MACH_DAVINCI_HASE1 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DAVINCI_HASE1 +# endif +# define machine_is_davinci_hase1() (machine_arch_type == MACH_TYPE_DAVINCI_HASE1) +#else +# define machine_is_davinci_hase1() (0) +#endif + +#ifdef CONFIG_MACH_LGEINCITEPHONE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_LGEINCITEPHONE +# endif +# define machine_is_lgeincitephone() (machine_arch_type == MACH_TYPE_LGEINCITEPHONE) +#else +# define machine_is_lgeincitephone() (0) +#endif + +#ifdef CONFIG_MACH_EA313X +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_EA313X +# endif +# define machine_is_ea313x() (machine_arch_type == MACH_TYPE_EA313X) +#else +# define machine_is_ea313x() (0) +#endif + +#ifdef CONFIG_MACH_FWBD_39064 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_FWBD_39064 +# endif +# define machine_is_fwbd_39064() (machine_arch_type == MACH_TYPE_FWBD_39064) +#else +# define machine_is_fwbd_39064() (0) +#endif + +#ifdef CONFIG_MACH_FWBD_390128 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_FWBD_390128 +# endif +# define machine_is_fwbd_390128() (machine_arch_type == MACH_TYPE_FWBD_390128) +#else +# define machine_is_fwbd_390128() (0) +#endif + +#ifdef CONFIG_MACH_PELCO_MOE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PELCO_MOE +# endif +# define machine_is_pelco_moe() (machine_arch_type == MACH_TYPE_PELCO_MOE) +#else +# define machine_is_pelco_moe() (0) +#endif + +#ifdef CONFIG_MACH_MINIMIX27 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MINIMIX27 +# endif +# define machine_is_minimix27() (machine_arch_type == MACH_TYPE_MINIMIX27) +#else +# define machine_is_minimix27() (0) +#endif + +#ifdef CONFIG_MACH_OMAP3_THUNDER +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP3_THUNDER +# endif +# define machine_is_omap3_thunder() (machine_arch_type == MACH_TYPE_OMAP3_THUNDER) +#else +# define machine_is_omap3_thunder() (0) +#endif + +#ifdef CONFIG_MACH_PASSIONC +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PASSIONC +# endif +# define machine_is_passionc() (machine_arch_type == MACH_TYPE_PASSIONC) +#else +# define machine_is_passionc() (0) +#endif + +#ifdef CONFIG_MACH_MX27AMATA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MX27AMATA +# endif +# define machine_is_mx27amata() (machine_arch_type == MACH_TYPE_MX27AMATA) +#else +# define machine_is_mx27amata() (0) +#endif + +#ifdef CONFIG_MACH_BGAT1 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BGAT1 +# endif +# define machine_is_bgat1() (machine_arch_type == MACH_TYPE_BGAT1) +#else +# define machine_is_bgat1() (0) +#endif + +#ifdef CONFIG_MACH_BUZZ +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BUZZ +# endif +# define machine_is_buzz() (machine_arch_type == MACH_TYPE_BUZZ) +#else +# define machine_is_buzz() (0) +#endif + +#ifdef CONFIG_MACH_MB9G20 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MB9G20 +# endif +# define machine_is_mb9g20() (machine_arch_type == MACH_TYPE_MB9G20) +#else +# define machine_is_mb9g20() (0) +#endif + +#ifdef CONFIG_MACH_YUSHAN +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_YUSHAN +# endif +# define machine_is_yushan() (machine_arch_type == MACH_TYPE_YUSHAN) +#else +# define machine_is_yushan() (0) +#endif + +#ifdef CONFIG_MACH_LIZARD +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_LIZARD +# endif +# define machine_is_lizard() (machine_arch_type == MACH_TYPE_LIZARD) +#else +# define machine_is_lizard() (0) +#endif + +#ifdef CONFIG_MACH_OMAP3POLYCOM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP3POLYCOM +# endif +# define machine_is_omap3polycom() (machine_arch_type == MACH_TYPE_OMAP3POLYCOM) +#else +# define machine_is_omap3polycom() (0) +#endif + +#ifdef CONFIG_MACH_SMDKV210 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SMDKV210 +# endif +# define machine_is_smdkv210() (machine_arch_type == MACH_TYPE_SMDKV210) +#else +# define machine_is_smdkv210() (0) +#endif + +#ifdef CONFIG_MACH_BRAVO +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BRAVO +# endif +# define machine_is_bravo() (machine_arch_type == MACH_TYPE_BRAVO) +#else +# define machine_is_bravo() (0) +#endif + +#ifdef CONFIG_MACH_SIOGENTOO1 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SIOGENTOO1 +# endif +# define machine_is_siogentoo1() (machine_arch_type == MACH_TYPE_SIOGENTOO1) +#else +# define machine_is_siogentoo1() (0) +#endif + +#ifdef CONFIG_MACH_SIOGENTOO2 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SIOGENTOO2 +# endif +# define machine_is_siogentoo2() (machine_arch_type == MACH_TYPE_SIOGENTOO2) +#else +# define machine_is_siogentoo2() (0) +#endif + +#ifdef CONFIG_MACH_SM3K +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SM3K +# endif +# define machine_is_sm3k() (machine_arch_type == MACH_TYPE_SM3K) +#else +# define machine_is_sm3k() (0) +#endif + +#ifdef CONFIG_MACH_ACER_TEMPO_F900 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ACER_TEMPO_F900 +# endif +# define machine_is_acer_tempo_f900() (machine_arch_type == MACH_TYPE_ACER_TEMPO_F900) +#else +# define machine_is_acer_tempo_f900() (0) +#endif + +#ifdef CONFIG_MACH_SST61VC010_DEV +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SST61VC010_DEV +# endif +# define machine_is_sst61vc010_dev() (machine_arch_type == MACH_TYPE_SST61VC010_DEV) +#else +# define machine_is_sst61vc010_dev() (0) +#endif + +#ifdef CONFIG_MACH_GLITTERTIND +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_GLITTERTIND +# endif +# define machine_is_glittertind() (machine_arch_type == MACH_TYPE_GLITTERTIND) +#else +# define machine_is_glittertind() (0) +#endif + +#ifdef CONFIG_MACH_OMAP_ZOOM3 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP_ZOOM3 +# endif +# define machine_is_omap_zoom3() (machine_arch_type == MACH_TYPE_OMAP_ZOOM3) +#else +# define machine_is_omap_zoom3() (0) +#endif + +#ifdef CONFIG_MACH_OMAP_3630SDP +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP_3630SDP +# endif +# define machine_is_omap_3630sdp() (machine_arch_type == MACH_TYPE_OMAP_3630SDP) +#else +# define machine_is_omap_3630sdp() (0) +#endif + +#ifdef CONFIG_MACH_CYBOOK2440 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CYBOOK2440 +# endif +# define machine_is_cybook2440() (machine_arch_type == MACH_TYPE_CYBOOK2440) +#else +# define machine_is_cybook2440() (0) +#endif + +#ifdef CONFIG_MACH_TORINO_S +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TORINO_S +# endif +# define machine_is_torino_s() (machine_arch_type == MACH_TYPE_TORINO_S) +#else +# define machine_is_torino_s() (0) +#endif + +#ifdef CONFIG_MACH_HAVANA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HAVANA +# endif +# define machine_is_havana() (machine_arch_type == MACH_TYPE_HAVANA) +#else +# define machine_is_havana() (0) +#endif + +#ifdef CONFIG_MACH_BEAUMONT_11 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BEAUMONT_11 +# endif +# define machine_is_beaumont_11() (machine_arch_type == MACH_TYPE_BEAUMONT_11) +#else +# define machine_is_beaumont_11() (0) +#endif + +#ifdef CONFIG_MACH_VANGUARD +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_VANGUARD +# endif +# define machine_is_vanguard() (machine_arch_type == MACH_TYPE_VANGUARD) +#else +# define machine_is_vanguard() (0) +#endif + +#ifdef CONFIG_MACH_S5PC110_DRACO +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_S5PC110_DRACO +# endif +# define machine_is_s5pc110_draco() (machine_arch_type == MACH_TYPE_S5PC110_DRACO) +#else +# define machine_is_s5pc110_draco() (0) +#endif + +#ifdef CONFIG_MACH_CARTESIO_TWO +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CARTESIO_TWO +# endif +# define machine_is_cartesio_two() (machine_arch_type == MACH_TYPE_CARTESIO_TWO) +#else +# define machine_is_cartesio_two() (0) +#endif + +#ifdef CONFIG_MACH_ASTER +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ASTER +# endif +# define machine_is_aster() (machine_arch_type == MACH_TYPE_ASTER) +#else +# define machine_is_aster() (0) +#endif + +#ifdef CONFIG_MACH_VOGUESV210 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_VOGUESV210 +# endif +# define machine_is_voguesv210() (machine_arch_type == MACH_TYPE_VOGUESV210) +#else +# define machine_is_voguesv210() (0) +#endif + +#ifdef CONFIG_MACH_ACM500X +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ACM500X +# endif +# define machine_is_acm500x() (machine_arch_type == MACH_TYPE_ACM500X) +#else +# define machine_is_acm500x() (0) +#endif + +#ifdef CONFIG_MACH_KM9260 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_KM9260 +# endif +# define machine_is_km9260() (machine_arch_type == MACH_TYPE_KM9260) +#else +# define machine_is_km9260() (0) +#endif + +#ifdef CONFIG_MACH_NIDEFLEXG1 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NIDEFLEXG1 +# endif +# define machine_is_nideflexg1() (machine_arch_type == MACH_TYPE_NIDEFLEXG1) +#else +# define machine_is_nideflexg1() (0) +#endif + +#ifdef CONFIG_MACH_CTERA_PLUG_IO +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CTERA_PLUG_IO +# endif +# define machine_is_ctera_plug_io() (machine_arch_type == MACH_TYPE_CTERA_PLUG_IO) +#else +# define machine_is_ctera_plug_io() (0) +#endif + +#ifdef CONFIG_MACH_SMARTQ7 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SMARTQ7 +# endif +# define machine_is_smartq7() (machine_arch_type == MACH_TYPE_SMARTQ7) +#else +# define machine_is_smartq7() (0) +#endif + +#ifdef CONFIG_MACH_AT91SAM9G10EK2 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AT91SAM9G10EK2 +# endif +# define machine_is_at91sam9g10ek2() (machine_arch_type == MACH_TYPE_AT91SAM9G10EK2) +#else +# define machine_is_at91sam9g10ek2() (0) +#endif + +#ifdef CONFIG_MACH_ASUSP527 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ASUSP527 +# endif +# define machine_is_asusp527() (machine_arch_type == MACH_TYPE_ASUSP527) +#else +# define machine_is_asusp527() (0) +#endif + +#ifdef CONFIG_MACH_AT91SAM9G20MPM2 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AT91SAM9G20MPM2 +# endif +# define machine_is_at91sam9g20mpm2() (machine_arch_type == MACH_TYPE_AT91SAM9G20MPM2) +#else +# define machine_is_at91sam9g20mpm2() (0) +#endif + +#ifdef CONFIG_MACH_TOPASA900 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TOPASA900 +# endif +# define machine_is_topasa900() (machine_arch_type == MACH_TYPE_TOPASA900) +#else +# define machine_is_topasa900() (0) +#endif + +#ifdef CONFIG_MACH_ELECTRUM_100 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ELECTRUM_100 +# endif +# define machine_is_electrum_100() (machine_arch_type == MACH_TYPE_ELECTRUM_100) +#else +# define machine_is_electrum_100() (0) +#endif + +#ifdef CONFIG_MACH_MX51GRB +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MX51GRB +# endif +# define machine_is_mx51grb() (machine_arch_type == MACH_TYPE_MX51GRB) +#else +# define machine_is_mx51grb() (0) +#endif + +#ifdef CONFIG_MACH_XEA300 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_XEA300 +# endif +# define machine_is_xea300() (machine_arch_type == MACH_TYPE_XEA300) +#else +# define machine_is_xea300() (0) +#endif + +#ifdef CONFIG_MACH_HTCSTARTREK +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HTCSTARTREK +# endif +# define machine_is_htcstartrek() (machine_arch_type == MACH_TYPE_HTCSTARTREK) +#else +# define machine_is_htcstartrek() (0) +#endif + +#ifdef CONFIG_MACH_LIMA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_LIMA +# endif +# define machine_is_lima() (machine_arch_type == MACH_TYPE_LIMA) +#else +# define machine_is_lima() (0) +#endif + +#ifdef CONFIG_MACH_CSB740 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CSB740 +# endif +# define machine_is_csb740() (machine_arch_type == MACH_TYPE_CSB740) +#else +# define machine_is_csb740() (0) +#endif + +#ifdef CONFIG_MACH_USB_S8815 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_USB_S8815 +# endif +# define machine_is_usb_s8815() (machine_arch_type == MACH_TYPE_USB_S8815) +#else +# define machine_is_usb_s8815() (0) +#endif + +#ifdef CONFIG_MACH_WATSON_EFM_PLUGIN +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_WATSON_EFM_PLUGIN +# endif +# define machine_is_watson_efm_plugin() (machine_arch_type == MACH_TYPE_WATSON_EFM_PLUGIN) +#else +# define machine_is_watson_efm_plugin() (0) +#endif + +#ifdef CONFIG_MACH_MILKYWAY +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MILKYWAY +# endif +# define machine_is_milkyway() (machine_arch_type == MACH_TYPE_MILKYWAY) +#else +# define machine_is_milkyway() (0) +#endif + +#ifdef CONFIG_MACH_G4EVM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_G4EVM +# endif +# define machine_is_g4evm() (machine_arch_type == MACH_TYPE_G4EVM) +#else +# define machine_is_g4evm() (0) +#endif + +#ifdef CONFIG_MACH_PICOMOD6 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PICOMOD6 +# endif +# define machine_is_picomod6() (machine_arch_type == MACH_TYPE_PICOMOD6) +#else +# define machine_is_picomod6() (0) +#endif + +#ifdef CONFIG_MACH_OMAPL138_HAWKBOARD +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAPL138_HAWKBOARD +# endif +# define machine_is_omapl138_hawkboard() (machine_arch_type == MACH_TYPE_OMAPL138_HAWKBOARD) +#else +# define machine_is_omapl138_hawkboard() (0) +#endif + +#ifdef CONFIG_MACH_IP6000 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_IP6000 +# endif +# define machine_is_ip6000() (machine_arch_type == MACH_TYPE_IP6000) +#else +# define machine_is_ip6000() (0) +#endif + +#ifdef CONFIG_MACH_IP6010 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_IP6010 +# endif +# define machine_is_ip6010() (machine_arch_type == MACH_TYPE_IP6010) +#else +# define machine_is_ip6010() (0) +#endif + +#ifdef CONFIG_MACH_UTM400 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_UTM400 +# endif +# define machine_is_utm400() (machine_arch_type == MACH_TYPE_UTM400) +#else +# define machine_is_utm400() (0) +#endif + +#ifdef CONFIG_MACH_OMAP3_ZYBEX +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OMAP3_ZYBEX +# endif +# define machine_is_omap3_zybex() (machine_arch_type == MACH_TYPE_OMAP3_ZYBEX) +#else +# define machine_is_omap3_zybex() (0) +#endif + +#ifdef CONFIG_MACH_WIRELESS_SPACE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_WIRELESS_SPACE +# endif +# define machine_is_wireless_space() (machine_arch_type == MACH_TYPE_WIRELESS_SPACE) +#else +# define machine_is_wireless_space() (0) +#endif + +#ifdef CONFIG_MACH_SX560 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SX560 +# endif +# define machine_is_sx560() (machine_arch_type == MACH_TYPE_SX560) +#else +# define machine_is_sx560() (0) +#endif + +#ifdef CONFIG_MACH_TS41X +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TS41X +# endif +# define machine_is_ts41x() (machine_arch_type == MACH_TYPE_TS41X) +#else +# define machine_is_ts41x() (0) +#endif + +#ifdef CONFIG_MACH_ELPHEL10373 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ELPHEL10373 +# endif +# define machine_is_elphel10373() (machine_arch_type == MACH_TYPE_ELPHEL10373) +#else +# define machine_is_elphel10373() (0) +#endif + +#ifdef CONFIG_MACH_RHOBOT +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_RHOBOT +# endif +# define machine_is_rhobot() (machine_arch_type == MACH_TYPE_RHOBOT) +#else +# define machine_is_rhobot() (0) +#endif + +#ifdef CONFIG_MACH_MX51_REFRESH +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MX51_REFRESH +# endif +# define machine_is_mx51_refresh() (machine_arch_type == MACH_TYPE_MX51_REFRESH) +#else +# define machine_is_mx51_refresh() (0) +#endif + +#ifdef CONFIG_MACH_LS9260 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_LS9260 +# endif +# define machine_is_ls9260() (machine_arch_type == MACH_TYPE_LS9260) +#else +# define machine_is_ls9260() (0) +#endif + +#ifdef CONFIG_MACH_SHANK +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SHANK +# endif +# define machine_is_shank() (machine_arch_type == MACH_TYPE_SHANK) +#else +# define machine_is_shank() (0) +#endif + +#ifdef CONFIG_MACH_QSD8X50_ST1 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_QSD8X50_ST1 +# endif +# define machine_is_qsd8x50_st1() (machine_arch_type == MACH_TYPE_QSD8X50_ST1) +#else +# define machine_is_qsd8x50_st1() (0) +#endif + +#ifdef CONFIG_MACH_AT91SAM9M10EKES +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AT91SAM9M10EKES +# endif +# define machine_is_at91sam9m10ekes() (machine_arch_type == MACH_TYPE_AT91SAM9M10EKES) +#else +# define machine_is_at91sam9m10ekes() (0) +#endif + +#ifdef CONFIG_MACH_HIRAM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HIRAM +# endif +# define machine_is_hiram() (machine_arch_type == MACH_TYPE_HIRAM) +#else +# define machine_is_hiram() (0) +#endif + +#ifdef CONFIG_MACH_PHY3250 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PHY3250 +# endif +# define machine_is_phy3250() (machine_arch_type == MACH_TYPE_PHY3250) +#else +# define machine_is_phy3250() (0) +#endif + +#ifdef CONFIG_MACH_EA3250 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_EA3250 +# endif +# define machine_is_ea3250() (machine_arch_type == MACH_TYPE_EA3250) +#else +# define machine_is_ea3250() (0) +#endif + +#ifdef CONFIG_MACH_FDI3250 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_FDI3250 +# endif +# define machine_is_fdi3250() (machine_arch_type == MACH_TYPE_FDI3250) +#else +# define machine_is_fdi3250() (0) +#endif + +#ifdef CONFIG_MACH_WHITESTONE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_WHITESTONE +# endif +# define machine_is_whitestone() (machine_arch_type == MACH_TYPE_WHITESTONE) +#else +# define machine_is_whitestone() (0) +#endif + +#ifdef CONFIG_MACH_AT91SAM9263NIT +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AT91SAM9263NIT +# endif +# define machine_is_at91sam9263nit() (machine_arch_type == MACH_TYPE_AT91SAM9263NIT) +#else +# define machine_is_at91sam9263nit() (0) +#endif + +#ifdef CONFIG_MACH_CCMX51 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CCMX51 +# endif +# define machine_is_ccmx51() (machine_arch_type == MACH_TYPE_CCMX51) +#else +# define machine_is_ccmx51() (0) +#endif + +#ifdef CONFIG_MACH_CCMX51JS +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CCMX51JS +# endif +# define machine_is_ccmx51js() (machine_arch_type == MACH_TYPE_CCMX51JS) +#else +# define machine_is_ccmx51js() (0) +#endif + +#ifdef CONFIG_MACH_CCWMX51 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CCWMX51 +# endif +# define machine_is_ccwmx51() (machine_arch_type == MACH_TYPE_CCWMX51) +#else +# define machine_is_ccwmx51() (0) +#endif + +#ifdef CONFIG_MACH_CCWMX51JS +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CCWMX51JS +# endif +# define machine_is_ccwmx51js() (machine_arch_type == MACH_TYPE_CCWMX51JS) +#else +# define machine_is_ccwmx51js() (0) +#endif + +#ifdef CONFIG_MACH_MINI6410 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MINI6410 +# endif +# define machine_is_mini6410() (machine_arch_type == MACH_TYPE_MINI6410) +#else +# define machine_is_mini6410() (0) +#endif + +#ifdef CONFIG_MACH_TINY6410 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TINY6410 +# endif +# define machine_is_tiny6410() (machine_arch_type == MACH_TYPE_TINY6410) +#else +# define machine_is_tiny6410() (0) +#endif + +#ifdef CONFIG_MACH_NANO6410 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_NANO6410 +# endif +# define machine_is_nano6410() (machine_arch_type == MACH_TYPE_NANO6410) +#else +# define machine_is_nano6410() (0) +#endif + +#ifdef CONFIG_MACH_AT572D940HFNLDB +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AT572D940HFNLDB +# endif +# define machine_is_at572d940hfnldb() (machine_arch_type == MACH_TYPE_AT572D940HFNLDB) +#else +# define machine_is_at572d940hfnldb() (0) +#endif + +#ifdef CONFIG_MACH_HTCLEO +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HTCLEO +# endif +# define machine_is_htcleo() (machine_arch_type == MACH_TYPE_HTCLEO) +#else +# define machine_is_htcleo() (0) +#endif + +#ifdef CONFIG_MACH_AVP13 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_AVP13 +# endif +# define machine_is_avp13() (machine_arch_type == MACH_TYPE_AVP13) +#else +# define machine_is_avp13() (0) +#endif + +#ifdef CONFIG_MACH_XXSVIDEOD +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_XXSVIDEOD +# endif +# define machine_is_xxsvideod() (machine_arch_type == MACH_TYPE_XXSVIDEOD) +#else +# define machine_is_xxsvideod() (0) +#endif + +#ifdef CONFIG_MACH_VPNEXT +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_VPNEXT +# endif +# define machine_is_vpnext() (machine_arch_type == MACH_TYPE_VPNEXT) +#else +# define machine_is_vpnext() (0) +#endif + +#ifdef CONFIG_MACH_SWARCO_ITC3 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SWARCO_ITC3 +# endif +# define machine_is_swarco_itc3() (machine_arch_type == MACH_TYPE_SWARCO_ITC3) +#else +# define machine_is_swarco_itc3() (0) +#endif + +#ifdef CONFIG_MACH_TX51 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_TX51 +# endif +# define machine_is_tx51() (machine_arch_type == MACH_TYPE_TX51) +#else +# define machine_is_tx51() (0) +#endif + +#ifdef CONFIG_MACH_DOLBY_CAT1021 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DOLBY_CAT1021 +# endif +# define machine_is_dolby_cat1021() (machine_arch_type == MACH_TYPE_DOLBY_CAT1021) +#else +# define machine_is_dolby_cat1021() (0) +#endif + +#ifdef CONFIG_MACH_MX28EVK +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MX28EVK +# endif +# define machine_is_mx28evk() (machine_arch_type == MACH_TYPE_MX28EVK) +#else +# define machine_is_mx28evk() (0) +#endif + +#ifdef CONFIG_MACH_PHOENIX260 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_PHOENIX260 +# endif +# define machine_is_phoenix260() (machine_arch_type == MACH_TYPE_PHOENIX260) +#else +# define machine_is_phoenix260() (0) +#endif + +#ifdef CONFIG_MACH_UVACA_STORK +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_UVACA_STORK +# endif +# define machine_is_uvaca_stork() (machine_arch_type == MACH_TYPE_UVACA_STORK) +#else +# define machine_is_uvaca_stork() (0) +#endif + +#ifdef CONFIG_MACH_SMARTQ5 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SMARTQ5 +# endif +# define machine_is_smartq5() (machine_arch_type == MACH_TYPE_SMARTQ5) +#else +# define machine_is_smartq5() (0) +#endif + +#ifdef CONFIG_MACH_ALL3078 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ALL3078 +# endif +# define machine_is_all3078() (machine_arch_type == MACH_TYPE_ALL3078) +#else +# define machine_is_all3078() (0) +#endif + +#ifdef CONFIG_MACH_CTERA_2BAY_DS +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_CTERA_2BAY_DS +# endif +# define machine_is_ctera_2bay_ds() (machine_arch_type == MACH_TYPE_CTERA_2BAY_DS) +#else +# define machine_is_ctera_2bay_ds() (0) +#endif + +#ifdef CONFIG_MACH_SIOGENTOO3 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_SIOGENTOO3 +# endif +# define machine_is_siogentoo3() (machine_arch_type == MACH_TYPE_SIOGENTOO3) +#else +# define machine_is_siogentoo3() (0) +#endif + +#ifdef CONFIG_MACH_EPB5000 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_EPB5000 +# endif +# define machine_is_epb5000() (machine_arch_type == MACH_TYPE_EPB5000) +#else +# define machine_is_epb5000() (0) +#endif + +#ifdef CONFIG_MACH_HY9263 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HY9263 +# endif +# define machine_is_hy9263() (machine_arch_type == MACH_TYPE_HY9263) +#else +# define machine_is_hy9263() (0) +#endif + +#ifdef CONFIG_MACH_ACER_TEMPO_M900 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ACER_TEMPO_M900 +# endif +# define machine_is_acer_tempo_m900() (machine_arch_type == MACH_TYPE_ACER_TEMPO_M900) +#else +# define machine_is_acer_tempo_m900() (0) +#endif + +#ifdef CONFIG_MACH_ACER_TEMPO_DX900 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ACER_TEMPO_DX900 +# endif +# define machine_is_acer_tempo_dx650() (machine_arch_type == MACH_TYPE_ACER_TEMPO_DX900) +#else +# define machine_is_acer_tempo_dx650() (0) +#endif + +#ifdef CONFIG_MACH_ACER_TEMPO_X960 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ACER_TEMPO_X960 +# endif +# define machine_is_acer_tempo_x960() (machine_arch_type == MACH_TYPE_ACER_TEMPO_X960) +#else +# define machine_is_acer_tempo_x960() (0) +#endif + +#ifdef CONFIG_MACH_ACER_ETEN_V900 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ACER_ETEN_V900 +# endif +# define machine_is_acer_eten_v900() (machine_arch_type == MACH_TYPE_ACER_ETEN_V900) +#else +# define machine_is_acer_eten_v900() (0) +#endif + +#ifdef CONFIG_MACH_ACER_ETEN_X900 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ACER_ETEN_X900 +# endif +# define machine_is_acer_eten_x900() (machine_arch_type == MACH_TYPE_ACER_ETEN_X900) +#else +# define machine_is_acer_eten_x900() (0) +#endif + +#ifdef CONFIG_MACH_BONNELL +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BONNELL +# endif +# define machine_is_bonnell() (machine_arch_type == MACH_TYPE_BONNELL) +#else +# define machine_is_bonnell() (0) +#endif + +#ifdef CONFIG_MACH_OHT_MX27 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_OHT_MX27 +# endif +# define machine_is_oht_mx27() (machine_arch_type == MACH_TYPE_OHT_MX27) +#else +# define machine_is_oht_mx27() (0) +#endif + +#ifdef CONFIG_MACH_HTCQUARTZ +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_HTCQUARTZ +# endif +# define machine_is_htcquartz() (machine_arch_type == MACH_TYPE_HTCQUARTZ) +#else +# define machine_is_htcquartz() (0) +#endif + +#ifdef CONFIG_MACH_DAVINCI_DM6467TEVM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DAVINCI_DM6467TEVM +# endif +# define machine_is_davinci_dm6467tevm() (machine_arch_type == MACH_TYPE_DAVINCI_DM6467TEVM) +#else +# define machine_is_davinci_dm6467tevm() (0) +#endif + +#ifdef CONFIG_MACH_C3AX03 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_C3AX03 +# endif +# define machine_is_c3ax03() (machine_arch_type == MACH_TYPE_C3AX03) +#else +# define machine_is_c3ax03() (0) +#endif + +#ifdef CONFIG_MACH_MXT_TD60 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MXT_TD60 +# endif +# define machine_is_mxt_td60() (machine_arch_type == MACH_TYPE_MXT_TD60) +#else +# define machine_is_mxt_td60() (0) +#endif + +#ifdef CONFIG_MACH_ESYX +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ESYX +# endif +# define machine_is_esyx() (machine_arch_type == MACH_TYPE_ESYX) +#else +# define machine_is_esyx() (0) +#endif + +#ifdef CONFIG_MACH_DOVE_DB +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DOVE_DB +# endif +# define machine_is_dove_db2() (machine_arch_type == MACH_TYPE_DOVE_DB) +#else +# define machine_is_dove_db2() (0) +#endif + +#ifdef CONFIG_MACH_BULLDOG +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BULLDOG +# endif +# define machine_is_bulldog() (machine_arch_type == MACH_TYPE_BULLDOG) +#else +# define machine_is_bulldog() (0) +#endif + +#ifdef CONFIG_MACH_DERELL_ME2000 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_DERELL_ME2000 +# endif +# define machine_is_derell_me2000() (machine_arch_type == MACH_TYPE_DERELL_ME2000) +#else +# define machine_is_derell_me2000() (0) +#endif + +#ifdef CONFIG_MACH_BCMRING_BASE +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BCMRING_BASE +# endif +# define machine_is_bcmring_base() (machine_arch_type == MACH_TYPE_BCMRING_BASE) +#else +# define machine_is_bcmring_base() (0) +#endif + +#ifdef CONFIG_MACH_BCMRING_EVM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BCMRING_EVM +# endif +# define machine_is_bcmring_evm() (machine_arch_type == MACH_TYPE_BCMRING_EVM) +#else +# define machine_is_bcmring_evm() (0) +#endif + +#ifdef CONFIG_MACH_BCMRING_EVM_JAZZ +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BCMRING_EVM_JAZZ +# endif +# define machine_is_bcmring_evm_jazz() (machine_arch_type == MACH_TYPE_BCMRING_EVM_JAZZ) +#else +# define machine_is_bcmring_evm_jazz() (0) +#endif + +#ifdef CONFIG_MACH_BCMRING_SP +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BCMRING_SP +# endif +# define machine_is_bcmring_sp() (machine_arch_type == MACH_TYPE_BCMRING_SP) +#else +# define machine_is_bcmring_sp() (0) +#endif + +#ifdef CONFIG_MACH_BCMRING_SV +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BCMRING_SV +# endif +# define machine_is_bcmring_sv() (machine_arch_type == MACH_TYPE_BCMRING_SV) +#else +# define machine_is_bcmring_sv() (0) +#endif + +#ifdef CONFIG_MACH_BCMRING_SV_JAZZ +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BCMRING_SV_JAZZ +# endif +# define machine_is_bcmring_sv_jazz() (machine_arch_type == MACH_TYPE_BCMRING_SV_JAZZ) +#else +# define machine_is_bcmring_sv_jazz() (0) +#endif + +#ifdef CONFIG_MACH_BCMRING_TABLET +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BCMRING_TABLET +# endif +# define machine_is_bcmring_tablet() (machine_arch_type == MACH_TYPE_BCMRING_TABLET) +#else +# define machine_is_bcmring_tablet() (0) +#endif + +#ifdef CONFIG_MACH_BCMRING_VP +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BCMRING_VP +# endif +# define machine_is_bcmring_vp() (machine_arch_type == MACH_TYPE_BCMRING_VP) +#else +# define machine_is_bcmring_vp() (0) +#endif + +#ifdef CONFIG_MACH_BCMRING_EVM_SEIKOR +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BCMRING_EVM_SEIKOR +# endif +# define machine_is_bcmring_evm_seikor() (machine_arch_type == MACH_TYPE_BCMRING_EVM_SEIKOR) +#else +# define machine_is_bcmring_evm_seikor() (0) +#endif + +#ifdef CONFIG_MACH_BCMRING_SP_WQVGA +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BCMRING_SP_WQVGA +# endif +# define machine_is_bcmring_sp_wqvga() (machine_arch_type == MACH_TYPE_BCMRING_SP_WQVGA) +#else +# define machine_is_bcmring_sp_wqvga() (0) +#endif + +#ifdef CONFIG_MACH_BCMRING_CUSTOM +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_BCMRING_CUSTOM +# endif +# define machine_is_bcmring_custom() (machine_arch_type == MACH_TYPE_BCMRING_CUSTOM) +#else +# define machine_is_bcmring_custom() (0) +#endif + +#ifdef CONFIG_MACH_ACER_S200 +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_ACER_S200 +# endif +# define machine_is_acer_s200() (machine_arch_type == MACH_TYPE_ACER_S200) +#else +# define machine_is_acer_s200() (0) +#endif + /* * These have not yet been registered */ diff --git a/include/asm-blackfin/delay.h b/include/asm-blackfin/delay.h index ea0b366..3af6ad3 100644 --- a/include/asm-blackfin/delay.h +++ b/include/asm-blackfin/delay.h @@ -47,7 +47,7 @@ extern __inline__ void __delay(unsigned long loops) * first constant multiplications gets optimized away if the delay is * a constant) */ -extern __inline__ void udelay(unsigned long usecs) +extern __inline__ void __udelay(unsigned long usecs) { __delay(usecs); } diff --git a/include/asm-i386/interrupt.h b/include/asm-i386/interrupt.h index 7f408cb..3e2674a 100644 --- a/include/asm-i386/interrupt.h +++ b/include/asm-i386/interrupt.h @@ -43,31 +43,4 @@ extern char exception_stack[]; #define __isr__ void __attribute__ ((regparm(0))) -#define DECLARE_INTERRUPT(x) \ - asm(".globl irq_"#x"\n" \ - "irq_"#x":\n" \ - "pusha \n" \ - "pushl $"#x"\n" \ - "pushl $irq_return\n" \ - "jmp do_irq\n"); \ - __isr__ irq_##x(void) - -#define DECLARE_EXCEPTION(x, f) \ - asm(".globl exp_"#x"\n" \ - "exp_"#x":\n" \ - "pusha \n" \ - "movl %esp, %ebx\n" \ - "movl $exception_stack, %eax\n" \ - "movl %eax, %esp \n" \ - "pushl %ebx\n" \ - "movl 32(%esp), %ebx\n" \ - "xorl %edx, %edx\n" \ - "movw 36(%esp), %dx\n" \ - "pushl %edx\n" \ - "pushl %ebx\n" \ - "pushl $"#x"\n" \ - "pushl $exp_return\n" \ - "jmp "#f"\n"); \ - __isr__ exp_##x(void) - #endif diff --git a/include/asm-i386/u-boot-i386.h b/include/asm-i386/u-boot-i386.h index 3921e01..7c99c8c 100644 --- a/include/asm-i386/u-boot-i386.h +++ b/include/asm-i386/u-boot-i386.h @@ -24,25 +24,9 @@ #ifndef _U_BOOT_I386_H_ #define _U_BOOT_I386_H_ 1 -/* for the following variables, see start.S */ -extern ulong i386boot_start; /* code start (in flash) */ -extern ulong i386boot_end; /* code end (in flash) */ -extern ulong i386boot_romdata_start;/* datasegment in flash (also code+rodata end) */ -extern ulong i386boot_romdata_dest; /* data location segment in ram */ -extern ulong i386boot_romdata_size; /* size of data segment */ -extern ulong i386boot_bss_start; /* bss start */ -extern ulong i386boot_bss_size; /* bss size */ -extern ulong i386boot_stack_end; /* first usable RAM address after bss and stack */ -extern ulong i386boot_ram_end; /* end of ram */ - -extern ulong i386boot_realmode; /* start of realmode entry code */ -extern ulong i386boot_realmode_size;/* size of realmode entry code */ -extern ulong i386boot_bios; /* start of BIOS emulation code */ -extern ulong i386boot_bios_size; /* size of BIOS emulation code */ - - /* cpu/.../cpu.c */ -int cpu_init(void); +int cpu_init_r(void); +int cpu_init_f(void); /* cpu/.../timer.c */ void timer_isr(void *); @@ -55,9 +39,6 @@ int timer_init(void); /* cpu/.../interrupts.c */ int cpu_init_interrupts(void); -/* cpu/.../exceptions.c */ -int cpu_init_exceptions(void); - /* board/.../... */ int board_init(void); int dram_init(void); diff --git a/include/asm-ppc/4xx_pci.h b/include/asm-ppc/4xx_pci.h index 30125a1..f686e7c 100644 --- a/include/asm-ppc/4xx_pci.h +++ b/include/asm-ppc/4xx_pci.h @@ -1,6 +1,8 @@ #ifndef _405GP_PCI_H #define _405GP_PCI_H +#include <pci.h> + /*----------------------------------------------------------------------------+ | 405GP PCI core memory map defines. +----------------------------------------------------------------------------*/ @@ -49,4 +51,10 @@ #define PCIDEVID_405GP 0x0 +void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev); +int pci_arbiter_enabled(void); +int __pci_pre_init(struct pci_controller *hose); +void __pci_target_init(struct pci_controller *hose); +void __pci_master_init(struct pci_controller *hose); + #endif diff --git a/include/common.h b/include/common.h index f7c93bf..00b5434 100644 --- a/include/common.h +++ b/include/common.h @@ -107,6 +107,9 @@ typedef volatile unsigned char vu_char; #ifdef CONFIG_BLACKFIN #include <asm/blackfin.h> #endif +#ifdef CONFIG_SOC_DA8XX +#include <asm/arch/hardware.h> +#endif #include <part.h> #include <flash.h> @@ -495,8 +498,9 @@ int prt_mpc8220_clks (void); ulong get_OPB_freq (void); ulong get_PCI_freq (void); #endif -#if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) || \ - defined(CONFIG_LH7A40X) || defined(CONFIG_S3C6400) +#if defined(CONFIG_S3C24X0) || \ + defined(CONFIG_LH7A40X) || \ + defined(CONFIG_S3C6400) ulong get_FCLK (void); ulong get_HCLK (void); ulong get_PCLK (void); @@ -603,16 +607,17 @@ unsigned long long get_ticks(void); void wait_ticks (unsigned long); /* lib_$(ARCH)/time.c */ -void udelay (unsigned long); +void __udelay (unsigned long); ulong usec2ticks (unsigned long usec); ulong ticks2usec (unsigned long ticks); int init_timebase (void); +/* lib_generic/time.c */ +void udelay (unsigned long); + /* lib_generic/vsprintf.c */ ulong simple_strtoul(const char *cp,char **endp,unsigned int base); -#ifdef CONFIG_SYS_64BIT_VSPRINTF unsigned long long simple_strtoull(const char *cp,char **endp,unsigned int base); -#endif long simple_strtol(const char *cp,char **endp,unsigned int base); void panic(const char *fmt, ...) __attribute__ ((format (__printf__, 1, 2))); diff --git a/include/configs/ASH405.h b/include/configs/ASH405.h index 694a87b..5cb0f1e 100644 --- a/include/configs/ASH405.h +++ b/include/configs/ASH405.h @@ -160,8 +160,6 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/CMS700.h b/include/configs/CMS700.h index 2384925..ae8494d 100644 --- a/include/configs/CMS700.h +++ b/include/configs/CMS700.h @@ -165,8 +165,6 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is diff --git a/include/configs/DU440.h b/include/configs/DU440.h index e9ea1bf..65dc235 100644 --- a/include/configs/DU440.h +++ b/include/configs/DU440.h @@ -60,8 +60,9 @@ #define CONFIG_SYS_PCI_MEMBASE1 CONFIG_SYS_PCI_MEMBASE + 0x10000000 #define CONFIG_SYS_PCI_MEMBASE2 CONFIG_SYS_PCI_MEMBASE1 + 0x10000000 #define CONFIG_SYS_PCI_MEMBASE3 CONFIG_SYS_PCI_MEMBASE2 + 0x10000000 -#define CONFIG_SYS_PCI_IOBASE 0xe8000000 - +#define CONFIG_SYS_PCI_IOBASE 0xe8000000 +#define CONFIG_SYS_PCI_SUBSYS_VENDORID PCI_VENDOR_ID_ESDGMBH +#define CONFIG_SYS_PCI_SUBSYS_ID 0x0444 /* device ID for DU440 */ /* Don't change either of these */ #define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ diff --git a/include/configs/HH405.h b/include/configs/HH405.h index 1a2266f..9233523 100644 --- a/include/configs/HH405.h +++ b/include/configs/HH405.h @@ -219,8 +219,6 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/HUB405.h b/include/configs/HUB405.h index 518d94d..ea502d4 100644 --- a/include/configs/HUB405.h +++ b/include/configs/HUB405.h @@ -160,8 +160,6 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/IDS8247.h b/include/configs/IDS8247.h index 147a8b2..71bb7b4 100644 --- a/include/configs/IDS8247.h +++ b/include/configs/IDS8247.h @@ -263,8 +263,6 @@ #define CONFIG_SYS_NAND0_BASE 0xE1000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #endif /* CONFIG_CMD_NAND */ /*----------------------------------------------------------------------- diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index 5927e76..0a4ba29 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -236,7 +236,6 @@ #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000 diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 8eaff5d..79376b3 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -228,7 +228,6 @@ #define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_BR1_PRELIM ( CONFIG_SYS_NAND_BASE \ | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ diff --git a/include/configs/MPC8360ERDK.h b/include/configs/MPC8360ERDK.h index 6cee78a..1d1f94f 100644 --- a/include/configs/MPC8360ERDK.h +++ b/include/configs/MPC8360ERDK.h @@ -213,7 +213,6 @@ #define CONFIG_NAND_FSL_UPM 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_MTD_NAND_VERIFY_WRITE -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE #define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000001b /* Access window size 4K */ diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index abeb6a2..63f1d85 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -321,9 +321,6 @@ #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 - /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ diff --git a/include/configs/MPC837XERDB.h b/include/configs/MPC837XERDB.h index 7ef92f7..913184c 100644 --- a/include/configs/MPC837XERDB.h +++ b/include/configs/MPC837XERDB.h @@ -343,9 +343,6 @@ #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 - /* I2C */ #define CONFIG_HARD_I2C /* I2C with hardware support */ #undef CONFIG_SOFT_I2C /* I2C bit-banged */ diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 46d6e9d..87901b3 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -433,10 +433,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 - - /* * I2C */ diff --git a/include/configs/MPC8540ADS.h b/include/configs/MPC8540ADS.h index 4af599b..78bb74b 100644 --- a/include/configs/MPC8540ADS.h +++ b/include/configs/MPC8540ADS.h @@ -260,9 +260,6 @@ #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8541CDS.h b/include/configs/MPC8541CDS.h index f41fe30..e945da2 100644 --- a/include/configs/MPC8541CDS.h +++ b/include/configs/MPC8541CDS.h @@ -286,9 +286,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index b7d3553..799d946 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -242,9 +242,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 - /* I2C */ #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ #define CONFIG_HARD_I2C /* I2C with hardware support */ diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h index 53de56d..3eb0049 100644 --- a/include/configs/MPC8548CDS.h +++ b/include/configs/MPC8548CDS.h @@ -309,9 +309,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8555CDS.h b/include/configs/MPC8555CDS.h index abbfd47..07a8e61 100644 --- a/include/configs/MPC8555CDS.h +++ b/include/configs/MPC8555CDS.h @@ -284,9 +284,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index df59aca..4a4a9ed 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -253,9 +253,6 @@ #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8568MDS.h b/include/configs/MPC8568MDS.h index 426b933..128a7e1 100644 --- a/include/configs/MPC8568MDS.h +++ b/include/configs/MPC8568MDS.h @@ -270,9 +270,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index b87f375..1e659e2 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -247,9 +247,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 0e7745c..41e4a6e 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -367,9 +367,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* new uImage format support */ #define CONFIG_FIT 1 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h index 7cb4ccd..1d2d659 100644 --- a/include/configs/MPC8610HPCD.h +++ b/include/configs/MPC8610HPCD.h @@ -251,9 +251,6 @@ /* maximum size of the flat tree (8K) */ #define OF_FLAT_TREE_MAX_SIZE 8192 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index a46f7c8..12a8f60 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -301,10 +301,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 - -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/P1_P2_RDB.h b/include/configs/P1_P2_RDB.h index e2930c1..ddfe7aa 100644 --- a/include/configs/P1_P2_RDB.h +++ b/include/configs/P1_P2_RDB.h @@ -310,9 +310,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* new uImage format support */ #define CONFIG_FIT 1 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index 9574fca..df9ab34 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -401,9 +401,6 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* new uImage format support */ #define CONFIG_FIT 1 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ diff --git a/include/configs/PLU405.h b/include/configs/PLU405.h index 2f84f7f..3d59454 100644 --- a/include/configs/PLU405.h +++ b/include/configs/PLU405.h @@ -99,8 +99,6 @@ #define CONFIG_SUPPORT_VFAT -#define CONFIG_AUTO_UPDATE 1 /* autoupdate via compactflash */ - #undef CONFIG_WATCHDOG /* watchdog disabled */ #define CONFIG_RTC_MC146818 /* DS1685 is MC146818 compatible*/ @@ -183,8 +181,6 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* * PCI stuff */ @@ -266,10 +262,10 @@ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_FLASH_BASE 0xFFFA0000 -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (384 * 1024) /* Reserve 384kB for malloc() */ +#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1) +#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* * Environment Variable setup @@ -428,4 +424,14 @@ #define CONFIG_SYS_USB_OHCI_SLOT_NAME "ohci_pci" #define CONFIG_USB_STORAGE 1 +/* + * UBI + */ +#define CONFIG_CMD_UBI +#define CONFIG_RBTREE +#define CONFIG_MTD_DEVICE +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_MTDPARTS +#define CONFIG_LZO + #endif /* __CONFIG_H */ diff --git a/include/configs/PMC440.h b/include/configs/PMC440.h index d6e2f6b..6310cfc 100644 --- a/include/configs/PMC440.h +++ b/include/configs/PMC440.h @@ -351,7 +351,6 @@ #define CONFIG_CMD_BSP #define CONFIG_CMD_DATE -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_DTT #define CONFIG_CMD_DIAG @@ -359,7 +358,6 @@ #define CONFIG_CMD_ELF #define CONFIG_CMD_FAT #define CONFIG_CMD_I2C -#define CONFIG_CMD_IRQ #define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_NET @@ -435,11 +433,14 @@ /* Board-specific PCI */ #define CONFIG_SYS_PCI_TARGET_INIT #define CONFIG_SYS_PCI_MASTER_INIT +#define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ /* PCI identification */ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ #define CONFIG_SYS_PCI_SUBSYS_ID_NONMONARCH 0x0441 /* PCI Device ID: Non-Monarch */ #define CONFIG_SYS_PCI_SUBSYS_ID_MONARCH 0x0440 /* PCI Device ID: Monarch */ +/* for weak __pci_target_init() */ +#define CONFIG_SYS_PCI_SUBSYS_ID CONFIG_SYS_PCI_SUBSYS_ID_MONARCH #define CONFIG_SYS_PCI_CLASSCODE_NONMONARCH PCI_CLASS_PROCESSOR_POWERPC #define CONFIG_SYS_PCI_CLASSCODE_MONARCH PCI_CLASS_BRIDGE_HOST diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 6fba0ca..8e9d928 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -211,8 +211,6 @@ *----------------------------------------------------------------------- */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* * nand device 1 on dave (PPChameleonEVB) needs more time, * so we just introduce additional wait in nand_wait(), diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h index f68d834..36e952e 100644 --- a/include/configs/SIMPC8313.h +++ b/include/configs/SIMPC8313.h @@ -132,7 +132,6 @@ #define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) #define CONFIG_SYS_NAND_U_BOOT_DST 0x00100000 diff --git a/include/configs/TQM8272.h b/include/configs/TQM8272.h index 6eaa61d..12a7eda 100644 --- a/include/configs/TQM8272.h +++ b/include/configs/TQM8272.h @@ -442,8 +442,6 @@ WRITE_NAND(d, addr); \ } while(0) -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #endif /* CONFIG_CMD_NAND */ #define CONFIG_PCI diff --git a/include/configs/TQM85xx.h b/include/configs/TQM85xx.h index 1fbf4bf..d44fb07 100644 --- a/include/configs/TQM85xx.h +++ b/include/configs/TQM85xx.h @@ -372,8 +372,6 @@ #define NAND_BIG_DELAY_US 25 /* max tR for Samsung devices */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #endif /* CONFIG_NAND */ /* diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 618b7f0..ebc81c4 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -33,9 +33,10 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -#define CONFIG_VCMA9 1 /* on a MPL VCMA9 Board */ +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */ +#define CONFIG_VCMA9 1 /* on a MPL VCMA9 Board */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000/* VCMA9 has 12MHz input clock */ diff --git a/include/configs/VOH405.h b/include/configs/VOH405.h index 17397e8..38a1d0d 100644 --- a/include/configs/VOH405.h +++ b/include/configs/VOH405.h @@ -169,8 +169,6 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ #define CONFIG_SYS_NAND_QUIET 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/WUH405.h b/include/configs/WUH405.h index dbfa1aa..5c281a1 100644 --- a/include/configs/WUH405.h +++ b/include/configs/WUH405.h @@ -157,8 +157,6 @@ #define CONFIG_SYS_NAND_SKIP_BAD_DOT_I 1 /* ".i" read skips bad blocks */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * PCI stuff *----------------------------------------------------------------------- diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h index 1a810e4..c63fd42 100644 --- a/include/configs/XPEDITE5170.h +++ b/include/configs/XPEDITE5170.h @@ -239,9 +239,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/XPEDITE5200.h b/include/configs/XPEDITE5200.h index 3f73780..1a56c60 100644 --- a/include/configs/XPEDITE5200.h +++ b/include/configs/XPEDITE5200.h @@ -213,9 +213,6 @@ #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/XPEDITE5370.h b/include/configs/XPEDITE5370.h index 7782df3..7fd3668 100644 --- a/include/configs/XPEDITE5370.h +++ b/include/configs/XPEDITE5370.h @@ -244,9 +244,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/a320evb.h b/include/configs/a320evb.h new file mode 100644 index 0000000..fcc5563 --- /dev/null +++ b/include/configs/a320evb.h @@ -0,0 +1,222 @@ +/* + * (C) Copyright 2009 Faraday Technology + * Po-Yu Chuang <ratbert@faraday-tech.com> + * + * Configuation settings for the Faraday A320 board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include <asm/arch/a320.h> + +/*----------------------------------------------------------------------- + * CPU and Board Configuration Options + */ +#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */ + +#undef CONFIG_SKIP_LOWLEVEL_INIT + +/*----------------------------------------------------------------------- + * Timer + */ +#define CONFIG_SYS_HZ 1000 /* timer ticks per second */ + +/*----------------------------------------------------------------------- + * Real Time Clock + */ +#define CONFIG_RTC_FTRTC010 + +/*----------------------------------------------------------------------- + * Serial console configuration + */ + +/* FTUART is a high speed NS 16C550A compatible UART */ +#define CONFIG_BAUDRATE 38400 +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_COM1 0x98200000 +#define CONFIG_SYS_NS16550_REG_SIZE -4 +#define CONFIG_SYS_NS16550_CLK 18432000 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/*----------------------------------------------------------------------- + * Ethernet + */ +#define CONFIG_NET_MULTI +#define CONFIG_FTMAC100 + +#define CONFIG_BOOTDELAY 3 + +/*----------------------------------------------------------------------- + * Command line configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_CACHE +#define CONFIG_CMD_DATE +#define CONFIG_CMD_PING + +/*----------------------------------------------------------------------- + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "A320 # " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE \ + (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 + +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4 * 1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4 * 1024) /* FIQ stack */ +#endif + +/*----------------------------------------------------------------------- + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024) + +/*----------------------------------------------------------------------- + * size in bytes reserved for initial data +*/ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/*----------------------------------------------------------------------- + * SDRAM controller configuration + */ +#define CONFIG_SYS_FTSDMC020_TP0 (FTSDMC020_TP0_TRAS(2) | \ + FTSDMC020_TP0_TRP(1) | \ + FTSDMC020_TP0_TRCD(1) | \ + FTSDMC020_TP0_TRF(3) | \ + FTSDMC020_TP0_TWR(1) | \ + FTSDMC020_TP0_TCL(2)) + +#define CONFIG_SYS_FTSDMC020_TP1 (FTSDMC020_TP1_INI_PREC(4) | \ + FTSDMC020_TP1_INI_REFT(8) | \ + FTSDMC020_TP1_REF_INTV(0x180)) + +#define CONFIG_SYS_FTSDMC020_BANK0_BSR (FTSDMC020_BANK_ENABLE | \ + FTSDMC020_BANK_DDW_X16 | \ + FTSDMC020_BANK_DSZ_256M | \ + FTSDMC020_BANK_MBW_32 | \ + FTSDMC020_BANK_SIZE_64M) + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ + +/* + * Load address and memory test area should agree with + * board/faraday/a320/config.mk. Be careful not to overwrite U-boot itself. + */ +#define CONFIG_SYS_LOAD_ADDR 0x12000000 + +/* memtest works on 63 MB in DRAM */ +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x13F00000 + +/*----------------------------------------------------------------------- + * Static memory controller configuration + */ + +#include <asm/arch/ftsmc020.h> + +#define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ + FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ + FTSMC020_BANK_SIZE_1M | \ + FTSMC020_BANK_MBW_8) + +#define FTSMC020_BANK0_TIMING (FTSMC020_TPR_RBE | \ + FTSMC020_TPR_AST(3) | \ + FTSMC020_TPR_CTW(3) | \ + FTSMC020_TPR_ATI(0xf) | \ + FTSMC020_TPR_AT2(3) | \ + FTSMC020_TPR_WTC(3) | \ + FTSMC020_TPR_AHT(3) | \ + FTSMC020_TPR_TRNA(0xf)) + +#define FTSMC020_BANK1_CONFIG (FTSMC020_BANK_ENABLE | \ + FTSMC020_BANK_BASE(PHYS_FLASH_2) | \ + FTSMC020_BANK_SIZE_32M | \ + FTSMC020_BANK_MBW_32) + +#define FTSMC020_BANK1_TIMING (FTSMC020_TPR_AST(3) | \ + FTSMC020_TPR_CTW(3) | \ + FTSMC020_TPR_ATI(0xf) | \ + FTSMC020_TPR_AT2(3) | \ + FTSMC020_TPR_WTC(3) | \ + FTSMC020_TPR_AHT(3) | \ + FTSMC020_TPR_TRNA(0xf)) + +#define CONFIG_SYS_FTSMC020_CONFIGS { \ + { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ + { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ +} + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ + +/* use CFI framework */ +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_FLASH_CFI_DRIVER + +/* support JEDEC */ +#define CONFIG_FLASH_CFI_LEGACY +#define CONFIG_SYS_FLASH_LEGACY_512Kx8 + +#define PHYS_FLASH_1 0x00000000 +#define PHYS_FLASH_2 0x00400000 +#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 +#define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, PHYS_FLASH_2, } + +#define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 + +/* max number of memory banks */ +#define CONFIG_SYS_MAX_FLASH_BANKS 2 + +/* max number of sectors on one chip */ +#define CONFIG_SYS_MAX_FLASH_SECT 512 + +#undef CONFIG_SYS_FLASH_EMPTY_INFO + +/* environments */ +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR 0x00060000 +#define CONFIG_ENV_SIZE 0x20000 + +#endif /* __CONFIG_H */ diff --git a/include/configs/acadia.h b/include/configs/acadia.h index 2fb48b6..bd3388f 100644 --- a/include/configs/acadia.h +++ b/include/configs/acadia.h @@ -266,8 +266,6 @@ #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * External Bus Controller (EBC) Setup *----------------------------------------------------------------------*/ diff --git a/include/configs/afeb9260.h b/include/configs/afeb9260.h index 74677d8..58b8c8c 100644 --- a/include/configs/afeb9260.h +++ b/include/configs/afeb9260.h @@ -107,7 +107,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* NOR flash - no real flash on this board */ diff --git a/include/configs/alpr.h b/include/configs/alpr.h index e6248e9..964630f 100644 --- a/include/configs/alpr.h +++ b/include/configs/alpr.h @@ -231,13 +231,11 @@ */ #include <config_cmd_default.h> -#define CONFIG_CMD_ASKENV #define CONFIG_CMD_DHCP #define CONFIG_CMD_DIAG #define CONFIG_CMD_EEPROM #define CONFIG_CMD_FPGA #define CONFIG_CMD_I2C -#define CONFIG_CMD_IRQ #define CONFIG_CMD_MII #define CONFIG_CMD_NAND #define CONFIG_CMD_NET diff --git a/include/configs/apollon.h b/include/configs/apollon.h index 575f60e..adab454 100644 --- a/include/configs/apollon.h +++ b/include/configs/apollon.h @@ -76,6 +76,7 @@ * Size of malloc() pool */ #define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */ +#define CONFIG_ENV_SIZE_FLEX SZ_256K #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_1M) /* bytes reserved for initial data */ #define CONFIG_SYS_GBL_DATA_SIZE 128 @@ -255,8 +256,7 @@ #define CONFIG_SYS_MONITOR_LEN SZ_256K /* U-Boot image size */ #define CONFIG_ENV_IS_IN_ONENAND 1 #define CONFIG_ENV_ADDR 0x00020000 - -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ +#define CONFIG_ENV_ADDR_FLEX 0x00040000 #ifdef CONFIG_SYS_USE_UBI #define CONFIG_CMD_MTDPARTS diff --git a/include/configs/aria.h b/include/configs/aria.h index 2938eac..f89fc57 100644 --- a/include/configs/aria.h +++ b/include/configs/aria.h @@ -251,8 +251,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* * Configuration parameters for MPC5121 NAND driver */ diff --git a/include/configs/at91cap9adk.h b/include/configs/at91cap9adk.h index cc194d8..322718f 100644 --- a/include/configs/at91cap9adk.h +++ b/include/configs/at91cap9adk.h @@ -131,7 +131,6 @@ #define CONFIG_SYS_NAND_BASE 0x40000000 #define CONFIG_SYS_NAND_DBW_8 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet */ diff --git a/include/configs/at91sam9260ek.h b/include/configs/at91sam9260ek.h index 3507de2..0509011 100644 --- a/include/configs/at91sam9260ek.h +++ b/include/configs/at91sam9260ek.h @@ -123,7 +123,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* NOR flash - no real flash on this board */ diff --git a/include/configs/at91sam9261ek.h b/include/configs/at91sam9261ek.h index f86698f..fbf7389 100644 --- a/include/configs/at91sam9261ek.h +++ b/include/configs/at91sam9261ek.h @@ -133,7 +133,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC15 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* NOR flash - no real flash on this board */ diff --git a/include/configs/at91sam9263ek.h b/include/configs/at91sam9263ek.h index a1582fc..571351c 100644 --- a/include/configs/at91sam9263ek.h +++ b/include/configs/at91sam9263ek.h @@ -267,7 +267,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet */ diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index b460188..06184e7 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -118,7 +118,6 @@ /* NOR flash, if populated */ #ifndef CONFIG_CMD_NAND #define CONFIG_SYS_NO_FLASH 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #else #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 @@ -142,7 +141,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet */ diff --git a/include/configs/at91sam9rlek.h b/include/configs/at91sam9rlek.h index b83266d..6fad75d 100644 --- a/include/configs/at91sam9rlek.h +++ b/include/configs/at91sam9rlek.h @@ -119,7 +119,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PB6 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD17 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet - not present */ diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index 0b87418..0fbd8f4 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -87,9 +87,6 @@ # define CONFIG_CMD_SPIBOOTLDR # endif #endif -#ifdef CONFIG_CMD_NAND -# define CONFIG_SYS_64BIT_VSPRINTF -#endif /* * Console Settings diff --git a/include/configs/cpu9260.h b/include/configs/cpu9260.h index de8cfb7..4ef8566 100644 --- a/include/configs/cpu9260.h +++ b/include/configs/cpu9260.h @@ -295,7 +295,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ /* NOR flash */ #define CONFIG_SYS_FLASH_CFI 1 diff --git a/include/configs/da830evm.h b/include/configs/da830evm.h new file mode 100644 index 0000000..38e2ce1 --- /dev/null +++ b/include/configs/da830evm.h @@ -0,0 +1,243 @@ +/* + * Copyright (C) 2008 Texas Instruments, Inc <www.ti.com> + * + * Based on davinci_dvevm.h. Original Copyrights follow: + * + * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * Board + */ + +/* + * SoC Configuration + */ +#define CONFIG_MACH_DAVINCI_DA830_EVM +#define CONFIG_ARM926EJS /* arm926ejs CPU core */ +#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ +#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) +#define CONFIG_SYS_OSCIN_FREQ 24000000 +#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE +#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) +#define CONFIG_SYS_HZ 1000 +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_SKIP_RELOCATE_UBOOT /* to a proper address, init done */ + +/* + * Memory Info + */ +#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* reserved for initial data */ +#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ +#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ +#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_1 /* memtest start addr */ +#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 16*1024*1024) /* 16MB test */ +#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ +#define CONFIG_STACKSIZE (256*1024) /* regular stack */ + +/* + * Serial Driver info + */ +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ +#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */ +#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) +#define CONFIG_CONS_INDEX 1 /* use UART0 for console */ +#define CONFIG_BAUDRATE 115200 /* Default baud rate */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* + * I2C Configuration + */ +#define CONFIG_HARD_I2C +#define CONFIG_DRIVER_DAVINCI_I2C +#define CONFIG_SYS_I2C_SPEED 25000 /* 100Kbps won't work, H/W bug */ +#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ + +/* + * I2C EEPROM definitions for catalyst 24W256 EEPROM chip + */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20 + +/* + * Network & Ethernet Configuration + */ +#ifdef CONFIG_DRIVER_TI_EMAC +#define CONFIG_MII +#define CONFIG_BOOTP_DEFAULT +#define CONFIG_BOOTP_DNS +#define CONFIG_BOOTP_DNS2 +#define CONFIG_BOOTP_SEND_HOSTNAME +#define CONFIG_NET_RETRY_COUNT 10 +#define CONFIG_NET_MULTI +#endif + +/* + * Flash & Environment + */ +#ifdef CONFIG_USE_NAND +#undef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_NAND_DAVINCI +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */ +#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ +#define CONFIG_ENV_SIZE (128 << 10) +#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST +#define CONFIG_SYS_NAND_CS 3 +#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE +#define CONFIG_SYS_CLE_MASK 0x10 +#define CONFIG_SYS_ALE_MASK 0x8 +#define CONFIG_SYS_NAND_HW_ECC +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ +#define NAND_MAX_CHIPS 1 +#define DEF_BOOTM "" +#endif + +#ifdef CONFIG_USE_NOR +#define CONFIG_ENV_IS_IN_FLASH +#undef CONFIG_SYS_NO_FLASH +#define CONFIG_SYS_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */ +#define CONFIG_SYS_FLASH_SECT_SZ (64 << 10) /* 64KB */ +#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ*3) +#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE +#define PHYS_FLASH_SIZE (32 << 20) /* Flash size 32MB */ +#define CONFIG_SYS_MAX_FLASH_SECT (PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ) +#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ +#define CONFIG_SYS_FLASH_SPL_ACCESS +#endif + +#ifdef CONFIG_USE_SPIFLASH +#undef CONFIG_ENV_IS_IN_FLASH +#undef CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE (16 << 10) +#define CONFIG_ENV_OFFSET (256 << 10) +#define CONFIG_ENV_SECT_SIZE 4096 +#define CONFIG_SYS_NO_FLASH +#define CONFIG_SPI +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_DAVINCI_SPI +#define CONFIG_SYS_SPI_BASE DAVINCI_SPI0_BASE +#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI0_CLKID) +#define CONFIG_SF_DEFAULT_SPEED 50000000 +#define CONFIG_SYS_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED +#endif + + +/* + * U-Boot general configuration + */ +#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */ +#undef CONFIG_MISC_INIT_R +#undef CONFIG_BOOTDELAY +#define CONFIG_BOOTFILE "uImage" /* Boot file name */ +#define CONFIG_SYS_PROMPT "DA830-evm > " /* Command Prompt */ +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_MEMTEST_START + 0x700000) +#define CONFIG_VERSION_VARIABLE +#define CONFIG_AUTO_COMPLETE /* Won't work with hush so far, may be later */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_CMDLINE_EDITING +#define CONFIG_SYS_LONGHELP +#define CONFIG_CRC32_VERIFY +#define CONFIG_MX_CYCLIC + +/* + * Linux Information + */ +#define LINUX_BOOT_PARAM_ADDR (CONFIG_SYS_MEMTEST_START + 0x100) +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_BOOTARGS "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock/2 rw noinitrd ip=dhcp" +#define CONFIG_BOOTCOMMAND "" +#define CONFIG_BOOTDELAY 3 + +/* + * U-Boot commands + */ +#include <config_cmd_default.h> +#define CONFIG_CMD_ENV +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DIAG +#define CONFIG_CMD_MII +#define CONFIG_CMD_PING +#define CONFIG_CMD_SAVES +#define CONFIG_CMD_MEMORY +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_SETGETDCR +#define CONFIG_CMD_EEPROM + +#ifndef CONFIG_DRIVER_TI_EMAC +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_DHCP +#undef CONFIG_CMD_MII +#undef CONFIG_CMD_PING +#endif + +#ifdef CONFIG_USE_NAND +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_IMLS +#define CONFIG_CMD_NAND +#define CONFIG_CMD_MTDPARTS +#define CONFIG_MTD_PARTITIONS +#define CONFIG_CMD_UBI +#define CONFIG_RBTREE +#endif + +#ifdef CONFIG_USE_SPIFLASH +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_FLASH +#define CONFIG_CMD_SPI +#define CONFIG_CMD_SAVEENV +#endif + +#if !defined(CONFIG_USE_NAND) && \ + !defined(CONFIG_USE_NOR) && \ + !defined(CONFIG_USE_SPIFLASH) +#define CONFIG_ENV_IS_NOWHERE +#define CONFIG_SYS_NO_FLASH +#define CONFIG_ENV_SIZE (16 << 10) +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_FLASH +#undef CONFIG_CMD_ENV +#endif + +#ifdef CONFIG_USB_DA8XX +#define CONFIG_CMD_USB /* include support for usb */ +#define CONFIG_CMD_STORAGE /* include support for usb */ +#define CONFIG_CMD_FAT /* include support for FAT/storage*/ +#define CONFIG_DOS_PARTITION /* include support for FAT/storage*/ +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/davinci_dm355evm.h b/include/configs/davinci_dm355evm.h index ea40df0..d092fb8 100644 --- a/include/configs/davinci_dm355evm.h +++ b/include/configs/davinci_dm355evm.h @@ -69,7 +69,6 @@ #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST #define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_NAND_LARGEPAGE #define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } diff --git a/include/configs/davinci_dm355leopard.h b/include/configs/davinci_dm355leopard.h index 5db720e..ca3dea4 100644 --- a/include/configs/davinci_dm355leopard.h +++ b/include/configs/davinci_dm355leopard.h @@ -114,7 +114,6 @@ #define CONFIG_ENV_SIZE (256 << 10) /* 256 KiB */ #define CONFIG_ENV_IS_IN_NAND #define CONFIG_ENV_OFFSET 0x3C0000 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #undef CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_OVERWRITE #endif diff --git a/include/configs/davinci_dm365evm.h b/include/configs/davinci_dm365evm.h index 53a105b..4916077 100644 --- a/include/configs/davinci_dm365evm.h +++ b/include/configs/davinci_dm365evm.h @@ -77,7 +77,6 @@ #define CONFIG_SYS_NAND_USE_FLASH_BBT #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST #define CONFIG_SYS_NAND_PAGE_2K -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_SYS_NAND_LARGEPAGE #define CONFIG_SYS_NAND_BASE_LIST { 0x02000000, } diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h index 6617941..ce2d7c4 100644 --- a/include/configs/davinci_dm6467evm.h +++ b/include/configs/davinci_dm6467evm.h @@ -77,7 +77,6 @@ #define CONFIG_NAND_DAVINCI #undef CONFIG_ENV_IS_IN_FLASH #define CONFIG_ENV_IS_IN_NAND -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */ #define CONFIG_SYS_NAND_BASE_LIST {0x42000000, } #define CONFIG_SYS_NAND_HW_ECC diff --git a/include/configs/davinci_dvevm.h b/include/configs/davinci_dvevm.h index b045e80..f7d2399 100644 --- a/include/configs/davinci_dvevm.h +++ b/include/configs/davinci_dvevm.h @@ -138,7 +138,6 @@ #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define DEF_BOOTM "" #elif defined(CONFIG_SYS_USE_NOR) #ifdef CONFIG_NOR_UART_BOOT diff --git a/include/configs/davinci_schmoogie.h b/include/configs/davinci_schmoogie.h index 9384cdd..47db2aa 100644 --- a/include/configs/davinci_schmoogie.h +++ b/include/configs/davinci_schmoogie.h @@ -92,7 +92,6 @@ #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ /*=====================*/ /* Board related stuff */ /*=====================*/ diff --git a/include/configs/davinci_sffsdr.h b/include/configs/davinci_sffsdr.h index 71d48fb..f24eb7a 100644 --- a/include/configs/davinci_sffsdr.h +++ b/include/configs/davinci_sffsdr.h @@ -87,7 +87,6 @@ #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ /* I2C switch definitions for PCA9543 chip */ #define CONFIG_SYS_I2C_PCA9543_ADDR 0x70 #define CONFIG_SYS_I2C_PCA9543_ADDR_LEN 0 /* Single register. */ diff --git a/include/configs/davinci_sonata.h b/include/configs/davinci_sonata.h index 9138b2b..5a55c56 100644 --- a/include/configs/davinci_sonata.h +++ b/include/configs/davinci_sonata.h @@ -125,7 +125,6 @@ #define CONFIG_SYS_NAND_HW_ECC #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ #define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #define DEF_BOOTM "" #elif defined(CONFIG_SYS_USE_NOR) #ifdef CONFIG_NOR_UART_BOOT diff --git a/include/configs/delta.h b/include/configs/delta.h index 95e04f9..9c46c5b 100644 --- a/include/configs/delta.h +++ b/include/configs/delta.h @@ -226,8 +226,6 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND0_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* nand timeout values */ #define CONFIG_SYS_NAND_PROG_ERASE_TO 3000 #define CONFIG_SYS_NAND_OTHER_TO 100 diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h index bd5037e..e81da67 100644 --- a/include/configs/devkit8000.h +++ b/include/configs/devkit8000.h @@ -66,6 +66,9 @@ /* Hardware drivers */ +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* DM9000 */ #define CONFIG_NET_MULTI 1 #define CONFIG_NET_RETRY_COUNT 20 @@ -129,8 +132,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/eNET.h b/include/configs/eNET.h index 243a554..6a68bf4 100644 --- a/include/configs/eNET.h +++ b/include/configs/eNET.h @@ -28,6 +28,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#define CONFIG_RELOC_FIXUP_WORKS + /* * Stuff still to be dealt with - */ @@ -61,7 +63,7 @@ /* * Size of malloc() pool */ -#define CONFIG_MALLOC_SIZE (CONFIG_SYS_ENV_SIZE + 128*1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) #define CONFIG_BAUDRATE 9600 @@ -234,8 +236,8 @@ #ifndef __ASSEMBLER__ extern unsigned long ip; -#define PRINTIP asm ("call next_line\n" \ - "next_line:\n" \ +#define PRINTIP asm ("call 0\n" \ + "0:\n" \ "pop %%eax\n" \ "movl %%eax, %0\n" \ :"=r"(ip) \ diff --git a/include/configs/imx27lite.h b/include/configs/imx27lite.h index c639e5b..ee749ec 100644 --- a/include/configs/imx27lite.h +++ b/include/configs/imx27lite.h @@ -157,6 +157,7 @@ #define CONFIG_SYS_NAND_BASE 0xd8000000 #define CONFIG_JFFS2_NAND #define CONFIG_MXC_NAND_HWECC +#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ /* * SD/MMC diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h new file mode 100644 index 0000000..d9028fa --- /dev/null +++ b/include/configs/ipek01.h @@ -0,0 +1,408 @@ +/* + * (C) Copyright 2006 + * MicroSys GmbH + * + * (C) Copyright 2009 + * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ + +#define CONFIG_MPC5200 +#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ +#define CONFIG_MPX5200 1 /* ... on MPX5200 board */ +#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ +#define CONFIG_IPEK01 /* Motherboard is ipek01 */ + +#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ + +#define CONFIG_MISC_INIT_R + +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Serial console configuration + */ +#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ +#define CONFIG_BAUDRATE 115200 /* ... at 9600 bps */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ + +/* + * Video configuration for LIME GDC + */ +#define CONFIG_VIDEO +#ifdef CONFIG_VIDEO +#define CONFIG_VIDEO_MB862xx +#define CONFIG_VIDEO_MB862xx_ACCEL +#define VIDEO_FB_16BPP_WORD_SWAP +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO +#define CONFIG_CONSOLE_EXTRA_INFO +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_SYS_CONSOLE_IS_IN_ENV +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_SPLASH_SCREEN +#define CONFIG_VIDEO_BMP_GZIP +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */ +/* Lime clock frequency */ +#define CONFIG_SYS_MB862xx_CCF 0x90000 /* geo 166MHz other 133MHz */ +/* SDRAM parameter */ +#define CONFIG_SYS_MB862xx_MMR 0x41c767e3 +#endif + +/* + * PCI Mapping: + * 0x40000000 - 0x4fffffff - PCI Memory + * 0x50000000 - 0x50ffffff - PCI IO Space + */ +#define CONFIG_PCI 1 +#define CONFIG_PCI_PNP 1 +#define CONFIG_PCI_SCAN_SHOW 1 + +#define CONFIG_PCI_MEM_BUS 0x40000000 +#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS +#define CONFIG_PCI_MEM_SIZE 0x10000000 + +#define CONFIG_PCI_IO_BUS 0x50000000 +#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS +#define CONFIG_PCI_IO_SIZE 0x01000000 + +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 +#define CONFIG_EEPRO100 1 +#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ + +/* Partitions */ +#define CONFIG_DOS_PARTITION + +/* USB */ +#define CONFIG_USB_OHCI_NEW +#define CONFIG_SYS_OHCI_BE_CONTROLLER +#define CONFIG_USB_STORAGE + +#define CONFIG_SYS_USB_OHCI_CPU_INIT +#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB +#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" +#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> + +#ifdef CONFIG_VIDEO +#define CONFIG_CMD_BMP /* BMP support */ +#endif +#define CONFIG_CMD_DATE /* support for RTC, date/time...*/ +#define CONFIG_CMD_DHCP /* DHCP Support */ +#define CONFIG_CMD_FAT /* FAT support */ +#define CONFIG_CMD_I2C /* I2C serial bus support */ +#define CONFIG_CMD_IDE /* IDE harddisk support */ +#define CONFIG_CMD_IRQ /* irqinfo */ +#define CONFIG_CMD_MII /* MII support */ +#define CONFIG_CMD_PCI /* pciinfo */ +#define CONFIG_CMD_USB /* USB Support */ + +#define CONFIG_SYS_LOWBOOT 1 + +/* + * Autobooting + */ +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyPSC0\0" \ + "hostname=ipek01\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} " \ + "console=${consoledev},${baudrate}\0" \ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr} - ${fdtaddr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr} ${fdtaddr}\0" \ + "net_nfs=tftp 200000 ${bootfile}; tftp ${fdtaddr} ${fdtfile};" \ + "run nfsargs addip addtty;" \ + "bootm ${loadaddr} - ${fdtaddr}\0" \ + "rootpath=/opt/eldk/ppc_6xx\0" \ + "bootfile=ipek01/uImage\0" \ + "load=tftp 100000 ipek01/u-boot.bin\0" \ + "update=protect off FC000000 +60000; era FC000000 +60000; " \ + "cp.b 100000 FC000000 ${filesize}\0" \ + "upd=run load;run update\0" \ + "fdtaddr=800000\0" \ + "loadaddr=400000\0" \ + "fdtfile=ipek01/ipek01.dtb\0" \ + "" + +#define CONFIG_BOOTCOMMAND "run flash_self" + +/* + * IPB Bus clocking configuration. + */ +#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* for 133MHz */ +/* PCI clock must be 33, because board will not boot */ +#undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* for 66MHz */ + +/* + * Open firmware flat tree support + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 + +#define OF_CPU "PowerPC,5200@0" +#define OF_SOC "soc5200@f0000000" +#define OF_TBCLK (bd->bi_busfreq / 4) + +/* + * I2C configuration + */ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #1 or #2 */ + +#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */ +#define CONFIG_SYS_I2C_SLAVE 0x7F + +/* + * EEPROM configuration + */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* + * RTC configuration + */ +#define CONFIG_RTC_PCF8563 +#define CONFIG_SYS_I2C_RTC_ADDR 0x51 + +#define CONFIG_SYS_FLASH_BASE 0xFC000000 +#define CONFIG_SYS_FLASH_SIZE 0x01000000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ + CONFIG_SYS_MONITOR_LEN) + +#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ +#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ + +/* use CFI flash driver */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_EMPTY_INFO +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 + +/* + * Environment settings + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SIZE 0x10000 +#define CONFIG_ENV_SECT_SIZE 0x20000 +#define CONFIG_ENV_OVERWRITE 1 +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE + +/* + * Memory map + */ +#define CONFIG_SYS_MBAR 0xf0000000 +#define CONFIG_SYS_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 +#define CONFIG_SYS_SRAM_BASE 0xF1000000 +#define CONFIG_SYS_SRAM_SIZE 0x00200000 +#define CONFIG_SYS_LIME_BASE 0xE4000000 +#define CONFIG_SYS_LIME_SIZE 0x04000000 +#define CONFIG_SYS_FPGA_BASE 0xC0000000 +#define CONFIG_SYS_FPGA_SIZE 0x10000000 +#define CONFIG_SYS_MPEG_BASE 0xe2000000 +#define CONFIG_SYS_MPEG_SIZE 0x01000000 +#define CONFIG_SYS_CF_BASE 0xe1000000 +#define CONFIG_SYS_CF_SIZE 0x01000000 + +/* Use SRAM until RAM will be available */ +#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM +/* End of used area in DPRAM */ +#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE + + + +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \ + CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE +#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) +# define CONFIG_SYS_RAMBOOT 1 +#endif + +#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ +#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 128 kB for malloc() */ +#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ + +/* + * Ethernet configuration + */ +#define CONFIG_MPC5xxx_FEC 1 +#define CONFIG_MPC5xxx_FEC_MII100 +#define CONFIG_PHY_ADDR 0x00 + +/* + * GPIO configuration + */ +#define CONFIG_SYS_GPS_PORT_CONFIG 0x1d556624 + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#ifdef CONFIG_CMD_KGDB +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +/* max number of command args */ +#define CONFIG_SYS_MAXARGS 16 +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + + +#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1...15 MB in DRAM */ + +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ + +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ +#define CONFIG_LOOPW + +/* + * Various low-level settings + */ +#if defined(CONFIG_MPC5200) +#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI +#define CONFIG_SYS_HID0_FINAL HID0_ICE +#else +#define CONFIG_SYS_HID0_INIT 0 +#define CONFIG_SYS_HID0_FINAL 0 +#endif + +#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE +#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE +#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE +#define CONFIG_SYS_CS1_START CONFIG_SYS_SRAM_BASE +#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_SRAM_SIZE +#define CONFIG_SYS_CS3_START CONFIG_SYS_LIME_BASE +#define CONFIG_SYS_CS3_SIZE CONFIG_SYS_LIME_SIZE +#define CONFIG_SYS_CS6_START CONFIG_SYS_FPGA_BASE +#define CONFIG_SYS_CS6_SIZE CONFIG_SYS_FPGA_SIZE +#define CONFIG_SYS_CS5_START CONFIG_SYS_CF_BASE +#define CONFIG_SYS_CS5_SIZE CONFIG_SYS_CF_SIZE +#define CONFIG_SYS_CS7_START CONFIG_SYS_MPEG_BASE +#define CONFIG_SYS_CS7_SIZE CONFIG_SYS_MPEG_SIZE + +#ifdef CONFIG_SYS_PCISPEED_66 +#define CONFIG_SYS_BOOTCS_CFG 0x0006F900 +#define CONFIG_SYS_CS1_CFG 0x0004FB00 +#define CONFIG_SYS_CS2_CFG 0x0006F900 +#else +#define CONFIG_SYS_BOOTCS_CFG 0x0002F900 +#define CONFIG_SYS_CS1_CFG 0x0001FB00 +#define CONFIG_SYS_CS2_CFG 0x0002F90C +#endif + +/* + * Ack active, Muxed mode, AS=24 bit address, DS=32 bit data, 0 + * waitstates, writeswap and readswap enabled + */ +#define CONFIG_SYS_CS3_CFG 0x00FFFB0C +#define CONFIG_SYS_CS6_CFG 0x00FFFB0C +#define CONFIG_SYS_CS7_CFG 0x4040751C + +#define CONFIG_SYS_CS_BURST 0x00000000 +#define CONFIG_SYS_CS_DEADCYCLE 0x33330000 + +#define CONFIG_SYS_RESET_ADDRESS 0xff000000 + +/*----------------------------------------------------------------------- + * USB stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_USB_CLOCK 0x0001BBBB +#define CONFIG_USB_CONFIG 0x00005000 + +/*----------------------------------------------------------------------- + * IDE/ATA stuff Supports IDE harddisk + *----------------------------------------------------------------------- + */ +#define CONFIG_IDE_PREINIT + +#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ +#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ + +#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 + +#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA + +/* Offset for data I/O */ +#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) + +/* Offset for normal register accesses */ +#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) + +/* Offset for alternate registers */ +#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) + +/* Interval between registers */ +#define CONFIG_SYS_ATA_STRIDE 4 + +#endif /* __CONFIG_H */ diff --git a/include/configs/katmai.h b/include/configs/katmai.h index 3840267..c013ac4 100644 --- a/include/configs/katmai.h +++ b/include/configs/katmai.h @@ -140,6 +140,11 @@ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 +/* I2C bootstrap EEPROM */ +#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x50 +#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 +#define CONFIG_4xx_CONFIG_BLOCKSIZE 8 + /* I2C RTC */ #define CONFIG_RTC_M41T11 1 #define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */ @@ -194,8 +199,10 @@ /* * Commands additional to the ones defined in amcc-common.h */ -#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_CHIP_CONFIG #define CONFIG_CMD_DATE +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT #define CONFIG_CMD_PCI #define CONFIG_CMD_SDRAM #define CONFIG_CMD_SNTP diff --git a/include/configs/keymile-common.h b/include/configs/keymile-common.h index 80c41a4..2ef6a35 100644 --- a/include/configs/keymile-common.h +++ b/include/configs/keymile-common.h @@ -127,8 +127,6 @@ #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for UBI/UBIFS */ - /* UBI Support for all Keymile boards */ #define CONFIG_CMD_UBI #define CONFIG_RBTREE diff --git a/include/configs/kilauea.h b/include/configs/kilauea.h index 965599c..8d4ce8d 100644 --- a/include/configs/kilauea.h +++ b/include/configs/kilauea.h @@ -217,8 +217,6 @@ #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_ADDR + CONFIG_SYS_NAND_CS) #define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /*----------------------------------------------------------------------- * DDR SDRAM *----------------------------------------------------------------------*/ diff --git a/include/configs/korat.h b/include/configs/korat.h index ea6ba89..026dd08 100644 --- a/include/configs/korat.h +++ b/include/configs/korat.h @@ -69,6 +69,7 @@ #define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_OCM_BASE #define CONFIG_SYS_PCI_BASE 0xe0000000 /* Internal PCI regs */ #define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CONFIG_SYS_PCI_MEMBASE2 (CONFIG_SYS_PCI_MEMBASE + 0x20000000) /* Don't change either of these */ #define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* internal peripherals */ @@ -359,6 +360,7 @@ /* Board-specific PCI */ #define CONFIG_SYS_PCI_TARGET_INIT #define CONFIG_SYS_PCI_MASTER_INIT +#define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ #define CONFIG_SYS_PCI_SUBSYS_ID 0xcafe /* Whatever */ diff --git a/include/configs/lwmon5.h b/include/configs/lwmon5.h index 777a4d6..011dd5c 100644 --- a/include/configs/lwmon5.h +++ b/include/configs/lwmon5.h @@ -344,10 +344,12 @@ /* Video console */ #define CONFIG_VIDEO #define CONFIG_VIDEO_MB862xx +#define CONFIG_VIDEO_MB862xx_ACCEL #define CONFIG_CFB_CONSOLE #define CONFIG_VIDEO_LOGO #define CONFIG_CONSOLE_EXTRA_INFO #define VIDEO_FB_16BPP_PIXEL_SWAP +#define VIDEO_FB_16BPP_WORD_SWAP #define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_VIDEO_SW_CURSOR @@ -495,8 +497,6 @@ /*----------------------------------------------------------------------- * Graphics (Fujitsu Lime) *----------------------------------------------------------------------*/ -/* SDRAM Clock frequency adjustment register */ -#define CONFIG_SYS_LIME_SDRAM_CLOCK 0xC1FC0038 /* Lime Clock frequency is to set 100MHz */ #define CONFIG_SYS_LIME_CLOCK_100MHZ 0x00000 #if 0 @@ -504,15 +504,15 @@ #define CONFIG_SYS_LIME_CLOCK_133MHZ 0x10000 #endif -/* SDRAM Parameter register */ -#define CONFIG_SYS_LIME_MMR 0xC1FCFFFC /* SDRAM parameter value; was 0x414FB7F2, caused several vertical bars and pixel flare on display when 133MHz was configured. According to SDRAM chip datasheet CAS Latency is 3 for 133MHz and -75 Speed Grade */ #ifdef CONFIG_SYS_LIME_CLOCK_133MHZ -#define CONFIG_SYS_LIME_MMR_VALUE 0x414FB7F3 +#define CONFIG_SYS_MB862xx_MMR 0x414FB7F3 +#define CONFIG_SYS_MB862xx_CCF CONFIG_SYS_LIME_CLOCK_133MHZ #else -#define CONFIG_SYS_LIME_MMR_VALUE 0x414FB7F2 +#define CONFIG_SYS_MB862xx_MMR 0x414FB7F2 +#define CONFIG_SYS_MB862xx_CCF CONFIG_SYS_LIME_CLOCK_100MHZ #endif /*----------------------------------------------------------------------- diff --git a/include/configs/manroland/common.h b/include/configs/manroland/common.h index c0122b7..c04830b 100644 --- a/include/configs/manroland/common.h +++ b/include/configs/manroland/common.h @@ -125,6 +125,9 @@ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) #define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_COMMAND_HISTORY 1 +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ /* Enable an alternate, more extensive memory test */ #define CONFIG_SYS_ALT_MEMTEST diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h index e194c8f..cccc31d 100644 --- a/include/configs/mecp5123.h +++ b/include/configs/mecp5123.h @@ -177,8 +177,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* * Configuration parameters for MPC5121 NAND driver */ diff --git a/include/configs/meesc.h b/include/configs/meesc.h index b996854..ab5cbca 100644 --- a/include/configs/meesc.h +++ b/include/configs/meesc.h @@ -121,7 +121,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA22 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* Ethernet */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h index ebc518c..fb49388 100644 --- a/include/configs/mpc5121ads.h +++ b/include/configs/mpc5121ads.h @@ -239,8 +239,6 @@ #define NAND_MAX_CHIPS CONFIG_SYS_MAX_NAND_DEVICE #define CONFIG_SYS_NAND_SELECT_DEVICE /* driver supports mutipl. chips */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* * Configuration parameters for MPC5121 NAND driver */ diff --git a/include/configs/netstar.h b/include/configs/netstar.h index 7bddf24..20b423b 100644 --- a/include/configs/netstar.h +++ b/include/configs/netstar.h @@ -111,8 +111,6 @@ #define CONFIG_SYS_NAND_BASE 0x04000000 + (2 << 23) #define NAND_ALLOW_ERASE_ALL 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_HARD_I2C #define CONFIG_SYS_I2C_SPEED 100000 #define CONFIG_SYS_I2C_SLAVE 1 diff --git a/include/configs/nhk8815.h b/include/configs/nhk8815.h index a00c2fb..2b640dc 100644 --- a/include/configs/nhk8815.h +++ b/include/configs/nhk8815.h @@ -91,7 +91,6 @@ #define CONFIG_SYS_MEMTEST_END 0x0FFFFFFF #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256 * 1024) #define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */ -#define CONFIG_SYS_64BIT_VSPRINTF /* mtd desires this */ #define BOARD_LATE_INIT /* call board_late_init during start up */ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 19a5ec9..a6fe5e1 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -97,6 +97,9 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* commands to include */ #include <config_cmd_default.h> @@ -148,8 +151,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index a5514ae..00093f8 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -101,6 +101,9 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* commands to include */ #include <config_cmd_default.h> @@ -143,8 +146,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */ /* NAND devices */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h index ffb515d..0c12b9f 100644 --- a/include/configs/omap3_overo.h +++ b/include/configs/omap3_overo.h @@ -89,6 +89,9 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* commands to include */ #include <config_cmd_default.h> @@ -134,8 +137,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 6f21af3..154c0f4 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -92,6 +92,9 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* commands to include */ #include <config_cmd_default.h> @@ -137,9 +140,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ - -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index 229dc5e..d91c8ff 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -137,6 +137,9 @@ #define CONFIG_SYS_I2C_BUS_SELECT 1 #define CONFIG_DRIVER_OMAP34XX_I2C 1 +/* DDR - I use Infineon DDR */ +#define CONFIG_OMAP3_INFINEON_DDR 1 + /* OMITTED: single 1 Gbit MT29F1G NAND flash */ /* diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index da4b677..ef7a28b 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -98,6 +98,9 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* commands to include */ #include <config_cmd_default.h> @@ -144,9 +147,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */ /* devices */ - -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND /* nand device jffs2 lives on */ #define CONFIG_JFFS2_DEV "nand0" diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index 32cd6fd..2b07666 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -98,6 +98,9 @@ #define CONFIG_OMAP3_MMC 1 #define CONFIG_DOS_PARTITION 1 +/* DDR - I use Micron DDR */ +#define CONFIG_OMAP3_MICRON_DDR 1 + /* Status LED */ #define CONFIG_STATUS_LED 1 /* Status LED enabled */ #define CONFIG_BOARD_SPECIFIC_LED 1 @@ -164,8 +167,6 @@ #define GPMC_NAND_ECC_LP_x16_LAYOUT 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* Environment information */ #define CONFIG_BOOTDELAY 10 diff --git a/include/configs/openrd_base.h b/include/configs/openrd_base.h index 2aba0cb..88f27ba 100644 --- a/include/configs/openrd_base.h +++ b/include/configs/openrd_base.h @@ -114,7 +114,6 @@ #define NAND_MAX_CHIPS 1 #define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */ #define NAND_ALLOW_ERASE_ALL 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* diff --git a/include/configs/pdnb3.h b/include/configs/pdnb3.h index 2612165..220f686 100644 --- a/include/configs/pdnb3.h +++ b/include/configs/pdnb3.h @@ -266,7 +266,6 @@ */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x51000000 /* NAND FLASH Base Address */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h index 9bf49ba..399d15f 100644 --- a/include/configs/pm9261.h +++ b/include/configs/pm9261.h @@ -236,9 +236,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PA16 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - - /* NOR flash */ #define CONFIG_SYS_FLASH_CFI 1 #define CONFIG_FLASH_CFI_DRIVER 1 diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h index 6761c18..0af1280 100644 --- a/include/configs/pm9263.h +++ b/include/configs/pm9263.h @@ -259,7 +259,6 @@ #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD15 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PB30 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif #define CONFIG_CMD_JFFS2 1 diff --git a/include/configs/quad100hd.h b/include/configs/quad100hd.h index d63c43e..b08dcd4 100644 --- a/include/configs/quad100hd.h +++ b/include/configs/quad100hd.h @@ -226,7 +226,6 @@ #define CONFIG_SYS_NAND_ALE 30 /* our ALE is GPIO30 */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /*----------------------------------------------------------------------- diff --git a/include/configs/rd6281a.h b/include/configs/rd6281a.h index 3f4d42c..3d8e25c 100644 --- a/include/configs/rd6281a.h +++ b/include/configs/rd6281a.h @@ -107,7 +107,6 @@ #define NAND_MAX_CHIPS 1 #define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */ #define NAND_ALLOW_ERASE_ALL 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* diff --git a/include/configs/sbc2410x.h b/include/configs/sbc2410x.h index e6886cf..025ad09 100644 --- a/include/configs/sbc2410x.h +++ b/include/configs/sbc2410x.h @@ -43,9 +43,10 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -#define CONFIG_SBC2410X 1 /* on a friendly-arm SBC-2410X Board */ +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */ +#define CONFIG_SBC2410X 1 /* on a friendly-arm SBC-2410X Board */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000/* the SBC2410X has 12MHz input clock */ diff --git a/include/configs/sbc35_a9g20.h b/include/configs/sbc35_a9g20.h index 7a2dcd8..f4b3477 100644 --- a/include/configs/sbc35_a9g20.h +++ b/include/configs/sbc35_a9g20.h @@ -161,7 +161,6 @@ #define CONFIG_ENV_OFFSET 0x60000 #define CONFIG_ENV_OFFSET_REDUND 0x80000 #define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif #define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000" diff --git a/include/configs/sbc8641d.h b/include/configs/sbc8641d.h index 682d241..315eebe 100644 --- a/include/configs/sbc8641d.h +++ b/include/configs/sbc8641d.h @@ -285,9 +285,6 @@ #define CONFIG_OF_BOARD_SETUP 1 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - /* * I2C */ diff --git a/include/configs/sc3.h b/include/configs/sc3.h index 5763760..a5eca39 100644 --- a/include/configs/sc3.h +++ b/include/configs/sc3.h @@ -376,11 +376,6 @@ * CONFIG_SYS_FLASH_BASE -> start address of internal flash * CONFIG_SYS_MONITOR_BASE -> start of u-boot */ -#ifndef __ASSEMBLER__ -extern unsigned long offsetOfBigFlash; -extern unsigned long offsetOfEnvironment; -#endif - #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_FLASH_BASE 0xFFE00000 #define CONFIG_SYS_MONITOR_BASE 0xFFFC0000 /* placed last 256k */ @@ -427,8 +422,6 @@ extern unsigned long offsetOfEnvironment; #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_BASE 0x77D00000 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - #define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ /* No command line, one static partition */ diff --git a/include/configs/sc520_cdp.h b/include/configs/sc520_cdp.h index 214a9af..2f1dae7 100644 --- a/include/configs/sc520_cdp.h +++ b/include/configs/sc520_cdp.h @@ -65,7 +65,7 @@ /* * Size of malloc() pool */ -#define CONFIG_MALLOC_SIZE (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/sc520_spunk.h b/include/configs/sc520_spunk.h index f3fc960..cf5633c 100644 --- a/include/configs/sc520_spunk.h +++ b/include/configs/sc520_spunk.h @@ -63,7 +63,7 @@ /* * Size of malloc() pool */ -#define CONFIG_MALLOC_SIZE (CONFIG_ENV_SIZE + 128*1024) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) #define CONFIG_BAUDRATE 9600 diff --git a/include/configs/sequoia.h b/include/configs/sequoia.h index 9605ce2..5788d58 100644 --- a/include/configs/sequoia.h +++ b/include/configs/sequoia.h @@ -364,6 +364,7 @@ /* Board-specific PCI */ #define CONFIG_SYS_PCI_TARGET_INIT #define CONFIG_SYS_PCI_MASTER_INIT +#define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ #define CONFIG_SYS_PCI_SUBSYS_ID 0xcafe /* Whatever */ diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h index 1f95a3c..fc401a8 100644 --- a/include/configs/sheevaplug.h +++ b/include/configs/sheevaplug.h @@ -107,7 +107,6 @@ #define NAND_MAX_CHIPS 1 #define CONFIG_SYS_NAND_BASE 0xD8000000 /* KW_DEFADR_NANDF */ #define NAND_ALLOW_ERASE_ALL 1 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif /* diff --git a/include/configs/smdk2400.h b/include/configs/smdk2400.h index a1beb65..fd51219 100644 --- a/include/configs/smdk2400.h +++ b/include/configs/smdk2400.h @@ -34,9 +34,10 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an ARM920T core */ -#define CONFIG_S3C2400 1 /* in a SAMSUNG S3C2400 SoC */ -#define CONFIG_SMDK2400 1 /* on an SAMSUNG SMDK2400 Board */ +#define CONFIG_ARM920T 1 /* This is an ARM920T core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2400 1 /* specifically a SAMSUNG S3C2400 SoC */ +#define CONFIG_SMDK2400 1 /* on an SAMSUNG SMDK2400 Board */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000 /* SMDK2400 has 12 MHz input clock */ diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h index c57751b..f9d1e55 100644 --- a/include/configs/smdk2410.h +++ b/include/configs/smdk2410.h @@ -33,9 +33,10 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ -#define CONFIG_S3C2410 1 /* in a SAMSUNG S3C2410 SoC */ -#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ +#define CONFIG_ARM920T 1 /* This is an ARM920T Core */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2410 1 /* specifically a SAMSUNG S3C2410 SoC */ +#define CONFIG_SMDK2410 1 /* on a SAMSUNG SMDK2410 Board */ /* input clock of PLL */ #define CONFIG_SYS_CLK_FREQ 12000000/* the SMDK2410 has 12MHz input clock */ diff --git a/include/configs/smdk6400.h b/include/configs/smdk6400.h index f6e1221..f04feae 100644 --- a/include/configs/smdk6400.h +++ b/include/configs/smdk6400.h @@ -49,8 +49,6 @@ #define CONFIG_ENABLE_MMU #endif -#define CONFIG_MEMORY_UPPER_CODE - #define CONFIG_SETUP_MEMORY_TAGS #define CONFIG_CMDLINE_TAG #define CONFIG_INITRD_TAG @@ -270,8 +268,6 @@ 48, 49, 50, 51, 52, 53, 54, 55, \ 56, 57, 58, 59, 60, 61, 62, 63} -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* Boot configuration (define only one of next 3) */ #define CONFIG_BOOT_NAND /* None of these are currently implemented. Left from the original Samsung diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h index 8c472af..bf0ee67 100644 --- a/include/configs/smdkc100.h +++ b/include/configs/smdkc100.h @@ -213,8 +213,6 @@ #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */ #define CONFIG_IDENT_STRING " for SMDKC100" -#define CONFIG_SYS_64BIT_VSPRINTF - #if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000) #define CONFIG_ENABLE_MMU #endif diff --git a/include/configs/socrates.h b/include/configs/socrates.h index 35feed0..9641041 100644 --- a/include/configs/socrates.h +++ b/include/configs/socrates.h @@ -188,8 +188,6 @@ #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_CMD_NAND -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* LIME GDC */ #define CONFIG_SYS_LIME_BASE 0xc8000000 #define CONFIG_SYS_LIME_SIZE 0x04000000 /* 64 MB */ @@ -198,11 +196,13 @@ #define CONFIG_VIDEO #define CONFIG_VIDEO_MB862xx +#define CONFIG_VIDEO_MB862xx_ACCEL #define CONFIG_CFB_CONSOLE #define CONFIG_VIDEO_LOGO #define CONFIG_VIDEO_BMP_LOGO #define CONFIG_CONSOLE_EXTRA_INFO #define VIDEO_FB_16BPP_PIXEL_SWAP +#define VIDEO_FB_16BPP_WORD_SWAP #define CONFIG_VGA_AS_SINGLE_DEVICE #define CONFIG_SYS_CONSOLE_IS_IN_ENV #define CONFIG_VIDEO_SW_CURSOR @@ -210,6 +210,11 @@ #define CONFIG_VIDEO_BMP_GZIP #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */ +/* SDRAM Clock frequency, 100MHz (0x0000) or 133MHz (0x10000) */ +#define CONFIG_SYS_MB862xx_CCF 0x10000 +/* SDRAM parameter */ +#define CONFIG_SYS_MB862xx_MMR 0x4157BA63 + /* Serial Port */ #define CONFIG_CONS_INDEX 1 diff --git a/include/configs/tny_a9260.h b/include/configs/tny_a9260.h index 5b70a7b..4ad081b 100644 --- a/include/configs/tny_a9260.h +++ b/include/configs/tny_a9260.h @@ -138,7 +138,6 @@ #define CONFIG_ENV_OFFSET 0x60000 #define CONFIG_ENV_OFFSET_REDUND 0x80000 #define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ #endif #define CONFIG_BOOTCOMMAND "nboot 0x21000000 0 400000" diff --git a/include/configs/trab.h b/include/configs/trab.h index 97f30ce..9827195 100644 --- a/include/configs/trab.h +++ b/include/configs/trab.h @@ -40,10 +40,11 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_ARM920T 1 /* This is an arm920t CPU */ -#define CONFIG_S3C2400 1 /* in a SAMSUNG S3C2400 SoC */ -#define CONFIG_TRAB 1 /* on a TRAB Board */ -#undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */ +#define CONFIG_ARM920T 1 /* This is an arm920t CPU */ +#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */ +#define CONFIG_S3C2400 1 /* specifically a SAMSUNG S3C2400 SoC */ +#define CONFIG_TRAB 1 /* on a TRAB Board */ +#undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */ /* automatic software updates (see board/trab/auto_update.c) */ #define CONFIG_AUTO_UPDATE 1 diff --git a/include/configs/vct.h b/include/configs/vct.h index 20bf481..1b894a6 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -284,12 +284,6 @@ int vct_gpio_get(int pin); #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ /* - * Needed for 64bit printf format - */ -#define CONFIG_SYS_64BIT_VSPRINTF 1 -#define CONFIG_SYS_64BIT_STRTOUL 1 - -/* * UBI configuration */ #if defined(CONFIG_VCT_ONENAND) diff --git a/include/configs/yucca.h b/include/configs/yucca.h index b165bd7..42f8807 100644 --- a/include/configs/yucca.h +++ b/include/configs/yucca.h @@ -389,6 +389,11 @@ #define FPGA_REG1A_PE_SELSOURCE_0 0x0002 #define FPGA_REG1A_PE_SELSOURCE_1 0x0001 +#define FPGA_REG1A_GLED_ENCODE(n) (FPGA_REG1A_PE0_GLED >> (n)) +#define FPGA_REG1A_YLED_ENCODE(n) (FPGA_REG1A_PE0_YLED >> (n)) +#define FPGA_REG1A_PWRON_ENCODE(n) (FPGA_REG1A_PE0_PWRON >> (n)) +#define FPGA_REG1A_REFCLK_ENCODE(n) (FPGA_REG1A_PE0_REFCLK_ENABLE >> (n)) + /*----------------------------------------------------------------------------+ | PCIe Miscellaneous +----------------------------------------------------------------------------*/ @@ -407,6 +412,9 @@ #define FPGA_REG1C_PE1_PERST 0x0008 #define FPGA_REG1C_PE2_PERST 0x0004 +#define FPGA_REG1C_ROOTPOINT_ENCODE(n) (FPGA_REG1C_PE0_ROOTPOINT >> (n)) +#define FPGA_REG1C_PERST_ENCODE(n) (FPGA_REG1C_PE0_PERST >> (n)) + /*----------------------------------------------------------------------------+ | Defines +----------------------------------------------------------------------------*/ diff --git a/include/configs/zylonite.h b/include/configs/zylonite.h index 36c341e..d0fc138 100644 --- a/include/configs/zylonite.h +++ b/include/configs/zylonite.h @@ -205,8 +205,6 @@ #define CONFIG_SYS_NAND_SENDCMD_RETRY 3 #undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */ -#define CONFIG_SYS_64BIT_VSPRINTF /* needed for nand_util.c */ - /* NAND Timing Parameters (in ns) */ #define NAND_TIMING_tCH 10 #define NAND_TIMING_tCS 0 diff --git a/include/exports.h b/include/exports.h index 2e8fd8b..c3a5d2f 100644 --- a/include/exports.h +++ b/include/exports.h @@ -16,7 +16,7 @@ void install_hdlr(int, interrupt_handler_t*, void*); void free_hdlr(int); void *malloc(size_t); void free(void*); -void udelay(unsigned long); +void __udelay(unsigned long); unsigned long get_timer(unsigned long); void vprintf(const char *, va_list); void do_reset (void); diff --git a/include/image.h b/include/image.h index 04b62d1..d2e78fe 100644 --- a/include/image.h +++ b/include/image.h @@ -164,6 +164,7 @@ #define IH_COMP_GZIP 1 /* gzip Compression Used */ #define IH_COMP_BZIP2 2 /* bzip2 Compression Used */ #define IH_COMP_LZMA 3 /* lzma Compression Used */ +#define IH_COMP_LZO 4 /* lzo Compression Used */ #define IH_MAGIC 0x27051956 /* Image Magic Number */ #define IH_NMLEN 32 /* Image Name Length */ diff --git a/include/linux/lzo.h b/include/linux/lzo.h index d793497..88687fa 100644 --- a/include/linux/lzo.h +++ b/include/linux/lzo.h @@ -27,6 +27,10 @@ int lzo1x_1_compress(const unsigned char *src, size_t src_len, int lzo1x_decompress_safe(const unsigned char *src, size_t src_len, unsigned char *dst, size_t *dst_len); +/* decompress lzop format */ +int lzop_decompress(const unsigned char *src, size_t src_len, + unsigned char *dst, size_t *dst_len); + /* * Return values (< 0 = Error) */ diff --git a/include/linux/mtd/mtd-abi.h b/include/linux/mtd/mtd-abi.h index 410c5dd..8d5f60c 100644 --- a/include/linux/mtd/mtd-abi.h +++ b/include/linux/mtd/mtd-abi.h @@ -123,7 +123,7 @@ struct nand_oobfree { */ struct nand_ecclayout { uint32_t eccbytes; - uint32_t eccpos[64]; + uint32_t eccpos[128]; uint32_t oobavail; struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES]; }; diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index cb7c19a..94ad0c0 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -397,7 +397,7 @@ struct nand_chip { int bbt_erase_shift; int chip_shift; int numchips; - unsigned long chipsize; + uint64_t chipsize; int pagemask; int pagebuf; int subpagesize; diff --git a/include/linux/mtd/onenand.h b/include/linux/mtd/onenand.h index 9a6f317..68e174e 100644 --- a/include/linux/mtd/onenand.h +++ b/include/linux/mtd/onenand.h @@ -20,8 +20,9 @@ #include <linux/mtd/compat.h> #include <linux/mtd/bbm.h> +#define MAX_DIES 2 #define MAX_BUFFERRAM 2 -#define MAX_ONENAND_PAGESIZE (2048 + 64) +#define MAX_ONENAND_PAGESIZE (4096 + 128) /* Scan and identify a OneNAND device */ extern int onenand_scan (struct mtd_info *mtd, int max_chips); @@ -39,9 +40,14 @@ struct onenand_bufferram { /** * struct onenand_chip - OneNAND Private Flash Chip Data * @param base [BOARDSPECIFIC] address to access OneNAND + * @dies: [INTERN][FLEXONENAND] number of dies on chip + * @boundary: [INTERN][FLEXONENAND] Boundary of the dies + * @diesize: [INTERN][FLEXONENAND] Size of the dies * @param chipsize [INTERN] the size of one chip for multichip arrays * @param device_id [INTERN] device ID * @param verstion_id [INTERN] version ID + * @technology [INTERN] describes the internal NAND array technology such as SLC or MLC. + * @density_mask: [INTERN] chip density, used for DDP devices * @param options [BOARDSPECIFIC] various chip options. They can partly be set to inform onenand_scan about * @param erase_shift [INTERN] number of address bits in a block * @param page_shift [INTERN] number of address bits in a page @@ -64,9 +70,13 @@ struct onenand_bufferram { */ struct onenand_chip { void __iomem *base; + unsigned int dies; + unsigned int boundary[MAX_DIES]; + unsigned int diesize[MAX_DIES]; unsigned int chipsize; unsigned int device_id; unsigned int version_id; + unsigned int technology; unsigned int density_mask; unsigned int options; @@ -124,6 +134,8 @@ struct onenand_chip { #define ONENAND_SET_BUFFERRAM0(this) (this->bufferram_index = 0) #define ONENAND_SET_BUFFERRAM1(this) (this->bufferram_index = 1) +#define FLEXONENAND(this) (this->device_id & DEVICE_IS_FLEXONENAND) +#define ONENAND_IS_MLC(this) (this->technology & ONENAND_TECHNOLOGY_IS_MLC) #define ONENAND_IS_DDP(this) \ (this->device_id & ONENAND_DEVICE_IS_DDP) @@ -157,4 +169,6 @@ struct onenand_manufacturers { int onenand_bbt_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); +unsigned int onenand_block(struct onenand_chip *this, loff_t addr); +int flexonenand_region(struct mtd_info *mtd, loff_t addr); #endif /* __LINUX_MTD_ONENAND_H */ diff --git a/include/linux/mtd/onenand_regs.h b/include/linux/mtd/onenand_regs.h index 07fed1c..8449a3c 100644 --- a/include/linux/mtd/onenand_regs.h +++ b/include/linux/mtd/onenand_regs.h @@ -67,6 +67,9 @@ /* * Device ID Register F001h (R) */ +#define DEVICE_IS_FLEXONENAND (1 << 9) +#define FLEXONENAND_PI_MASK (0x3ff) +#define FLEXONENAND_PI_UNLOCK_SHIFT (14) #define ONENAND_DEVICE_DENSITY_MASK (0xf) #define ONENAND_DEVICE_DENSITY_SHIFT (4) #define ONENAND_DEVICE_IS_DDP (1 << 3) @@ -84,6 +87,11 @@ #define ONENAND_VERSION_PROCESS_SHIFT (8) /* + * Technology Register F006h (R) + */ +#define ONENAND_TECHNOLOGY_IS_MLC (1 << 0) + +/* * Start Address 1 F100h (R/W) */ #define ONENAND_DDP_SHIFT (15) @@ -93,7 +101,7 @@ /* * Start Address 8 F107h (R/W) */ -#define ONENAND_FPA_MASK (0x3f) +#define ONENAND_FPA_MASK (0x7f) #define ONENAND_FPA_SHIFT (2) #define ONENAND_FSA_MASK (0x03) @@ -105,7 +113,7 @@ #define ONENAND_BSA_BOOTRAM (0 << 2) #define ONENAND_BSA_DATARAM0 (2 << 2) #define ONENAND_BSA_DATARAM1 (3 << 2) -#define ONENAND_BSC_MASK (0x03) +#define ONENAND_BSC_MASK (0x07) /* * Command Register F220h (R/W) @@ -125,9 +133,14 @@ #define ONENAND_CMD_ERASE_VERIFY (0x71) #define ONENAND_CMD_RESET (0xF0) #define ONENAND_CMD_READID (0x90) +#define FLEXONENAND_CMD_RESET (0xF3) +#define FLEXONENAND_CMD_PI_UPDATE (0x05) +#define FLEXONENAND_CMD_PI_ACCESS (0x66) +#define FLEXONENAND_CMD_RECOVER_LSB (0x05) /* NOTE: Those are not *REAL* commands */ #define ONENAND_CMD_BUFFERRAM (0x1978) +#define FLEXONENAND_CMD_READ_PI (0x1985) /* * System Configuration 1 Register F221h (R, R/W) @@ -190,5 +203,6 @@ #define ONENAND_ECC_2BIT (1 << 1) #define ONENAND_ECC_2BIT_ALL (0xAAAA) #define ONENAND_ECC_4BIT_UNCORRECTABLE (0x1010) +#define FLEXONENAND_UNCORRECTABLE_ERROR (0x1010) #endif /* __ONENAND_REG_H */ diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h index 1016675..d1d9a96 100644 --- a/include/linux/mtd/partitions.h +++ b/include/linux/mtd/partitions.h @@ -38,8 +38,8 @@ struct mtd_partition { char *name; /* identifier string */ - u_int32_t size; /* partition size */ - u_int32_t offset; /* offset within the master MTD space */ + uint64_t size; /* partition size */ + uint64_t offset; /* offset within the master MTD space */ u_int32_t mask_flags; /* master MTD flags to mask out for this partition */ struct nand_ecclayout *ecclayout; /* out of band layout for this partition (NAND only)*/ struct mtd_info **mtdp; /* pointer to store the MTD object */ diff --git a/include/mb862xx.h b/include/mb862xx.h index 43f01e7..009da03 100644 --- a/include/mb862xx.h +++ b/include/mb862xx.h @@ -32,6 +32,8 @@ #define PCI_DEVICE_ID_CORAL_P 0x2019 #define PCI_DEVICE_ID_CORAL_PA 0x201E +#define MB862XX_TYPE_LIME 0x1 + #define GC_HOST_BASE 0x01fc0000 #define GC_DISP_BASE 0x01fd0000 #define GC_DRAW_BASE 0x01ff0000 @@ -39,6 +41,7 @@ /* Host interface registers */ #define GC_SRST 0x0000002c #define GC_CCF 0x00000038 +#define GC_CID 0x000000f0 #define GC_MMR 0x0000fffc /* @@ -99,6 +102,7 @@ #define GC_FC 0x00000480 #define GC_BC 0x00000484 #define GC_FIFO 0x000004a0 +#define GC_REV 0x00008084 #define GC_GEO_FIFO 0x00008400 typedef struct { @@ -106,6 +110,7 @@ typedef struct { unsigned int value; } gdc_regs; +int mb862xx_probe(unsigned int addr); const gdc_regs *board_get_regs (void); unsigned int board_video_init (void); void board_backlight_switch(int); diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h index 49da9d0..92279d5 100644 --- a/include/onenand_uboot.h +++ b/include/onenand_uboot.h @@ -23,6 +23,7 @@ struct erase_info; struct onenand_chip; extern struct mtd_info onenand_mtd; +extern struct onenand_chip onenand_chip; /* board */ extern void onenand_board_init(struct mtd_info *); @@ -38,6 +39,15 @@ extern int onenand_erase(struct mtd_info *mtd, struct erase_info *instr); extern char *onenand_print_device_info(int device, int version); +extern unsigned onenand_block(struct onenand_chip *this, loff_t addr); + +extern loff_t onenand_addr(struct onenand_chip *this, int block); + +extern int flexonenand_region(struct mtd_info *mtd, loff_t addr); + +extern int flexonenand_set_boundary(struct mtd_info *mtd, int die, + int boundary, int lock); + /* S3C64xx */ extern void s3c64xx_onenand_init(struct mtd_info *); extern void s3c64xx_set_width_regs(struct onenand_chip *); diff --git a/include/pca9564.h b/include/pca9564.h new file mode 100644 index 0000000..3e75259 --- /dev/null +++ b/include/pca9564.h @@ -0,0 +1,50 @@ +/* + * File: include/pca9564.h + * Author: + * + * Created: 2009-06-23 + * Description: PCA9564 i2c bridge driver + * + * Modified: + * Copyright 2009 CJSC "NII STT", http://www.niistt.ru/ + * + * Bugs: + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#ifndef _PCA9564_H +#define _PCA9564_H + +/* Clock speeds for the bus */ +#define PCA_CON_330kHz 0x00 +#define PCA_CON_288kHz 0x01 +#define PCA_CON_217kHz 0x02 +#define PCA_CON_146kHz 0x03 +#define PCA_CON_88kHz 0x04 +#define PCA_CON_59kHz 0x05 +#define PCA_CON_44kHz 0x06 +#define PCA_CON_36kHz 0x07 + +#define PCA_CON_AA 0x80 /* Assert Acknowledge */ +#define PCA_CON_ENSIO 0x40 /* Enable */ +#define PCA_CON_STA 0x20 /* Start */ +#define PCA_CON_STO 0x10 /* Stop */ +#define PCA_CON_SI 0x08 /* Serial Interrupt */ +#define PCA_CON_CR 0x07 /* Clock Rate (MASK) */ + +#endif + diff --git a/include/ppc405.h b/include/ppc405.h index 508c77b..bc2d051 100644 --- a/include/ppc405.h +++ b/include/ppc405.h @@ -566,25 +566,6 @@ #define MAL0_RCBS24 (MAL_DCR_BASE + 0x78) /* RX 24 Channel buffer size */ /*----------------------------------------------------------------------------- -| IIC Register Offsets -'----------------------------------------------------------------------------*/ -#define IICMDBUF 0x00 -#define IICSDBUF 0x02 -#define IICLMADR 0x04 -#define IICHMADR 0x05 -#define IICCNTL 0x06 -#define IICMDCNTL 0x07 -#define IICSTS 0x08 -#define IICEXTSTS 0x09 -#define IICLSADR 0x0A -#define IICHSADR 0x0B -#define IIC0_CLKDIV 0x0C -#define IICINTRMSK 0x0D -#define IICXFRCNT 0x0E -#define IICXTCNTLSS 0x0F -#define IICDIRECTCNTL 0x10 - -/*----------------------------------------------------------------------------- | UART Register Offsets '----------------------------------------------------------------------------*/ #define DATA_REG 0x00 diff --git a/include/ppc440.h b/include/ppc440.h index e54a977..e60fa13 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -1276,7 +1276,8 @@ #define CPC0_STRP1_PAE_MASK (0x80000000 >> 11) #define CPC0_STRP1_PISE_MASK (0x80000000 >> 13) #endif /* defined(CONFIG_440GP) */ -#if defined(CONFIG_440GX) || defined(CONFIG_440SP) +#if defined(CONFIG_440GX) || defined(CONFIG_440SP) || \ + defined(CONFIG_460EX) || defined(CONFIG_460GT) #define SDR0_SDSTP1_PAE_MASK (0x80000000 >> 13) #define SDR0_SDSTP1_PISE_MASK (0x80000000 >> 15) #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ @@ -1713,25 +1714,6 @@ #endif /*----------------------------------------------------------------------------- -| IIC Register Offsets -'----------------------------------------------------------------------------*/ -#define IICMDBUF 0x00 -#define IICSDBUF 0x02 -#define IICLMADR 0x04 -#define IICHMADR 0x05 -#define IICCNTL 0x06 -#define IICMDCNTL 0x07 -#define IICSTS 0x08 -#define IICEXTSTS 0x09 -#define IICLSADR 0x0A -#define IICHSADR 0x0B -#define IIC0_CLKDIV 0x0C -#define IICINTRMSK 0x0D -#define IICXFRCNT 0x0E -#define IICXTCNTLSS 0x0F -#define IICDIRECTCNTL 0x10 - -/*----------------------------------------------------------------------------- | PCI Internal Registers et. al. (accessed via plb) +----------------------------------------------------------------------------*/ #define PCIL0_CFGADR (CONFIG_SYS_PCI_BASE + 0x0ec00000) diff --git a/include/ppc4xx.h b/include/ppc4xx.h index 5024db4..ee30a4c 100644 --- a/include/ppc4xx.h +++ b/include/ppc4xx.h @@ -100,12 +100,6 @@ #endif /* 440EP/EPX 440GR/GRX 440SP/SPE 460EX/GT/SX 405EX*/ #if defined(CONFIG_440) -/* - * Enable long long (%ll ...) printf format on 440 PPC's since most of - * them support 36bit physical addressing - */ -#define CONFIG_SYS_64BIT_VSPRINTF -#define CONFIG_SYS_64BIT_STRTOUL #include <ppc440.h> #else #include <ppc405.h> diff --git a/include/s3c24x0.h b/include/s3c24x0.h deleted file mode 100644 index 56a551a..0000000 --- a/include/s3c24x0.h +++ /dev/null @@ -1,656 +0,0 @@ -/* - * (C) Copyright 2003 - * David Müller ELSOFT AG Switzerland. d.mueller@elsoft.ch - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -/************************************************ - * NAME : s3c24x0.h - * Version : 31.3.2003 - * - * common stuff for SAMSUNG S3C24X0 SoC - ************************************************/ - -#ifndef __S3C24X0_H__ -#define __S3C24X0_H__ - -typedef volatile u8 S3C24X0_REG8; -typedef volatile u16 S3C24X0_REG16; -typedef volatile u32 S3C24X0_REG32; - -/* Memory controller (see manual chapter 5) */ -struct s3c24x0_memctl { - S3C24X0_REG32 BWSCON; - S3C24X0_REG32 BANKCON[8]; - S3C24X0_REG32 REFRESH; - S3C24X0_REG32 BANKSIZE; - S3C24X0_REG32 MRSRB6; - S3C24X0_REG32 MRSRB7; -}; - - -/* USB HOST (see manual chapter 12) */ -struct s3c24x0_usb_host { - S3C24X0_REG32 HcRevision; - S3C24X0_REG32 HcControl; - S3C24X0_REG32 HcCommonStatus; - S3C24X0_REG32 HcInterruptStatus; - S3C24X0_REG32 HcInterruptEnable; - S3C24X0_REG32 HcInterruptDisable; - S3C24X0_REG32 HcHCCA; - S3C24X0_REG32 HcPeriodCuttendED; - S3C24X0_REG32 HcControlHeadED; - S3C24X0_REG32 HcControlCurrentED; - S3C24X0_REG32 HcBulkHeadED; - S3C24X0_REG32 HcBuldCurrentED; - S3C24X0_REG32 HcDoneHead; - S3C24X0_REG32 HcRmInterval; - S3C24X0_REG32 HcFmRemaining; - S3C24X0_REG32 HcFmNumber; - S3C24X0_REG32 HcPeriodicStart; - S3C24X0_REG32 HcLSThreshold; - S3C24X0_REG32 HcRhDescriptorA; - S3C24X0_REG32 HcRhDescriptorB; - S3C24X0_REG32 HcRhStatus; - S3C24X0_REG32 HcRhPortStatus1; - S3C24X0_REG32 HcRhPortStatus2; -}; - - -/* INTERRUPT (see manual chapter 14) */ -struct s3c24x0_interrupt { - S3C24X0_REG32 SRCPND; - S3C24X0_REG32 INTMOD; - S3C24X0_REG32 INTMSK; - S3C24X0_REG32 PRIORITY; - S3C24X0_REG32 INTPND; - S3C24X0_REG32 INTOFFSET; -#ifdef CONFIG_S3C2410 - S3C24X0_REG32 SUBSRCPND; - S3C24X0_REG32 INTSUBMSK; -#endif -}; - - -/* DMAS (see manual chapter 8) */ -struct s3c24x0_dma { - S3C24X0_REG32 DISRC; -#ifdef CONFIG_S3C2410 - S3C24X0_REG32 DISRCC; -#endif - S3C24X0_REG32 DIDST; -#ifdef CONFIG_S3C2410 - S3C24X0_REG32 DIDSTC; -#endif - S3C24X0_REG32 DCON; - S3C24X0_REG32 DSTAT; - S3C24X0_REG32 DCSRC; - S3C24X0_REG32 DCDST; - S3C24X0_REG32 DMASKTRIG; -#ifdef CONFIG_S3C2400 - S3C24X0_REG32 res[1]; -#endif -#ifdef CONFIG_S3C2410 - S3C24X0_REG32 res[7]; -#endif -}; - -struct s3c24x0_dmas { - struct s3c24x0_dma dma[4]; -}; - - -/* CLOCK & POWER MANAGEMENT (see S3C2400 manual chapter 6) */ -/* (see S3C2410 manual chapter 7) */ -struct s3c24x0_clock_power { - S3C24X0_REG32 LOCKTIME; - S3C24X0_REG32 MPLLCON; - S3C24X0_REG32 UPLLCON; - S3C24X0_REG32 CLKCON; - S3C24X0_REG32 CLKSLOW; - S3C24X0_REG32 CLKDIVN; -}; - - -/* LCD CONTROLLER (see manual chapter 15) */ -struct s3c24x0_lcd { - S3C24X0_REG32 LCDCON1; - S3C24X0_REG32 LCDCON2; - S3C24X0_REG32 LCDCON3; - S3C24X0_REG32 LCDCON4; - S3C24X0_REG32 LCDCON5; - S3C24X0_REG32 LCDSADDR1; - S3C24X0_REG32 LCDSADDR2; - S3C24X0_REG32 LCDSADDR3; - S3C24X0_REG32 REDLUT; - S3C24X0_REG32 GREENLUT; - S3C24X0_REG32 BLUELUT; - S3C24X0_REG32 res[8]; - S3C24X0_REG32 DITHMODE; - S3C24X0_REG32 TPAL; -#ifdef CONFIG_S3C2410 - S3C24X0_REG32 LCDINTPND; - S3C24X0_REG32 LCDSRCPND; - S3C24X0_REG32 LCDINTMSK; - S3C24X0_REG32 LPCSEL; -#endif -}; - - -/* NAND FLASH (see S3C2410 manual chapter 6) */ -struct s3c2410_nand { - S3C24X0_REG32 NFCONF; - S3C24X0_REG32 NFCMD; - S3C24X0_REG32 NFADDR; - S3C24X0_REG32 NFDATA; - S3C24X0_REG32 NFSTAT; - S3C24X0_REG32 NFECC; -}; - - -/* UART (see manual chapter 11) */ -struct s3c24x0_uart { - S3C24X0_REG32 ULCON; - S3C24X0_REG32 UCON; - S3C24X0_REG32 UFCON; - S3C24X0_REG32 UMCON; - S3C24X0_REG32 UTRSTAT; - S3C24X0_REG32 UERSTAT; - S3C24X0_REG32 UFSTAT; - S3C24X0_REG32 UMSTAT; -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 UTXH; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 URXH; -#else /* Little Endian */ - S3C24X0_REG8 UTXH; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 URXH; - S3C24X0_REG8 res2[3]; -#endif - S3C24X0_REG32 UBRDIV; -}; - - -/* PWM TIMER (see manual chapter 10) */ -struct s3c24x0_timer { - S3C24X0_REG32 TCNTB; - S3C24X0_REG32 TCMPB; - S3C24X0_REG32 TCNTO; -}; - -struct s3c24x0_timers { - S3C24X0_REG32 TCFG0; - S3C24X0_REG32 TCFG1; - S3C24X0_REG32 TCON; - struct s3c24x0_timer ch[4]; - S3C24X0_REG32 TCNTB4; - S3C24X0_REG32 TCNTO4; -}; - - -/* USB DEVICE (see manual chapter 13) */ -struct s3c24x0_usb_dev_fifos { -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res[3]; - S3C24X0_REG8 EP_FIFO_REG; -#else /* little endian */ - S3C24X0_REG8 EP_FIFO_REG; - S3C24X0_REG8 res[3]; -#endif -}; - -struct s3c24x0_usb_dev_dmas { -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 EP_DMA_CON; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 EP_DMA_UNIT; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 EP_DMA_FIFO; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 EP_DMA_TTC_L; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 EP_DMA_TTC_M; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 EP_DMA_TTC_H; -#else /* little endian */ - S3C24X0_REG8 EP_DMA_CON; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 EP_DMA_UNIT; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 EP_DMA_FIFO; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 EP_DMA_TTC_L; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 EP_DMA_TTC_M; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 EP_DMA_TTC_H; - S3C24X0_REG8 res6[3]; -#endif -}; - -struct s3c24x0_usb_device { -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 FUNC_ADDR_REG; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 PWR_REG; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 EP_INT_REG; - S3C24X0_REG8 res4[15]; - S3C24X0_REG8 USB_INT_REG; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 EP_INT_EN_REG; - S3C24X0_REG8 res6[15]; - S3C24X0_REG8 USB_INT_EN_REG; - S3C24X0_REG8 res7[3]; - S3C24X0_REG8 FRAME_NUM1_REG; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 FRAME_NUM2_REG; - S3C24X0_REG8 res9[3]; - S3C24X0_REG8 INDEX_REG; - S3C24X0_REG8 res10[7]; - S3C24X0_REG8 MAXP_REG; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 EP0_CSR_IN_CSR1_REG; - S3C24X0_REG8 res12[3]; - S3C24X0_REG8 IN_CSR2_REG; - S3C24X0_REG8 res13[7]; - S3C24X0_REG8 OUT_CSR1_REG; - S3C24X0_REG8 res14[3]; - S3C24X0_REG8 OUT_CSR2_REG; - S3C24X0_REG8 res15[3]; - S3C24X0_REG8 OUT_FIFO_CNT1_REG; - S3C24X0_REG8 res16[3]; - S3C24X0_REG8 OUT_FIFO_CNT2_REG; -#else /* little endian */ - S3C24X0_REG8 FUNC_ADDR_REG; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 PWR_REG; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 EP_INT_REG; - S3C24X0_REG8 res3[15]; - S3C24X0_REG8 USB_INT_REG; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 EP_INT_EN_REG; - S3C24X0_REG8 res5[15]; - S3C24X0_REG8 USB_INT_EN_REG; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 FRAME_NUM1_REG; - S3C24X0_REG8 res7[3]; - S3C24X0_REG8 FRAME_NUM2_REG; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 INDEX_REG; - S3C24X0_REG8 res9[7]; - S3C24X0_REG8 MAXP_REG; - S3C24X0_REG8 res10[7]; - S3C24X0_REG8 EP0_CSR_IN_CSR1_REG; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 IN_CSR2_REG; - S3C24X0_REG8 res12[3]; - S3C24X0_REG8 OUT_CSR1_REG; - S3C24X0_REG8 res13[7]; - S3C24X0_REG8 OUT_CSR2_REG; - S3C24X0_REG8 res14[3]; - S3C24X0_REG8 OUT_FIFO_CNT1_REG; - S3C24X0_REG8 res15[3]; - S3C24X0_REG8 OUT_FIFO_CNT2_REG; - S3C24X0_REG8 res16[3]; -#endif /* __BIG_ENDIAN */ - struct s3c24x0_usb_dev_fifos fifo[5]; - struct s3c24x0_usb_dev_dmas dma[5]; -}; - - -/* WATCH DOG TIMER (see manual chapter 18) */ -struct s3c24x0_watchdog { - S3C24X0_REG32 WTCON; - S3C24X0_REG32 WTDAT; - S3C24X0_REG32 WTCNT; -}; - - -/* IIC (see manual chapter 20) */ -struct s3c24x0_i2c { - S3C24X0_REG32 IICCON; - S3C24X0_REG32 IICSTAT; - S3C24X0_REG32 IICADD; - S3C24X0_REG32 IICDS; -}; - - -/* IIS (see manual chapter 21) */ -struct s3c24x0_i2s { -#ifdef __BIG_ENDIAN - S3C24X0_REG16 res1; - S3C24X0_REG16 IISCON; - S3C24X0_REG16 res2; - S3C24X0_REG16 IISMOD; - S3C24X0_REG16 res3; - S3C24X0_REG16 IISPSR; - S3C24X0_REG16 res4; - S3C24X0_REG16 IISFCON; - S3C24X0_REG16 res5; - S3C24X0_REG16 IISFIFO; -#else /* little endian */ - S3C24X0_REG16 IISCON; - S3C24X0_REG16 res1; - S3C24X0_REG16 IISMOD; - S3C24X0_REG16 res2; - S3C24X0_REG16 IISPSR; - S3C24X0_REG16 res3; - S3C24X0_REG16 IISFCON; - S3C24X0_REG16 res4; - S3C24X0_REG16 IISFIFO; - S3C24X0_REG16 res5; -#endif -}; - - -/* I/O PORT (see manual chapter 9) */ -struct s3c24x0_gpio { -#ifdef CONFIG_S3C2400 - S3C24X0_REG32 PACON; - S3C24X0_REG32 PADAT; - - S3C24X0_REG32 PBCON; - S3C24X0_REG32 PBDAT; - S3C24X0_REG32 PBUP; - - S3C24X0_REG32 PCCON; - S3C24X0_REG32 PCDAT; - S3C24X0_REG32 PCUP; - - S3C24X0_REG32 PDCON; - S3C24X0_REG32 PDDAT; - S3C24X0_REG32 PDUP; - - S3C24X0_REG32 PECON; - S3C24X0_REG32 PEDAT; - S3C24X0_REG32 PEUP; - - S3C24X0_REG32 PFCON; - S3C24X0_REG32 PFDAT; - S3C24X0_REG32 PFUP; - - S3C24X0_REG32 PGCON; - S3C24X0_REG32 PGDAT; - S3C24X0_REG32 PGUP; - - S3C24X0_REG32 OPENCR; - - S3C24X0_REG32 MISCCR; - S3C24X0_REG32 EXTINT; -#endif -#ifdef CONFIG_S3C2410 - S3C24X0_REG32 GPACON; - S3C24X0_REG32 GPADAT; - S3C24X0_REG32 res1[2]; - S3C24X0_REG32 GPBCON; - S3C24X0_REG32 GPBDAT; - S3C24X0_REG32 GPBUP; - S3C24X0_REG32 res2; - S3C24X0_REG32 GPCCON; - S3C24X0_REG32 GPCDAT; - S3C24X0_REG32 GPCUP; - S3C24X0_REG32 res3; - S3C24X0_REG32 GPDCON; - S3C24X0_REG32 GPDDAT; - S3C24X0_REG32 GPDUP; - S3C24X0_REG32 res4; - S3C24X0_REG32 GPECON; - S3C24X0_REG32 GPEDAT; - S3C24X0_REG32 GPEUP; - S3C24X0_REG32 res5; - S3C24X0_REG32 GPFCON; - S3C24X0_REG32 GPFDAT; - S3C24X0_REG32 GPFUP; - S3C24X0_REG32 res6; - S3C24X0_REG32 GPGCON; - S3C24X0_REG32 GPGDAT; - S3C24X0_REG32 GPGUP; - S3C24X0_REG32 res7; - S3C24X0_REG32 GPHCON; - S3C24X0_REG32 GPHDAT; - S3C24X0_REG32 GPHUP; - S3C24X0_REG32 res8; - - S3C24X0_REG32 MISCCR; - S3C24X0_REG32 DCLKCON; - S3C24X0_REG32 EXTINT0; - S3C24X0_REG32 EXTINT1; - S3C24X0_REG32 EXTINT2; - S3C24X0_REG32 EINTFLT0; - S3C24X0_REG32 EINTFLT1; - S3C24X0_REG32 EINTFLT2; - S3C24X0_REG32 EINTFLT3; - S3C24X0_REG32 EINTMASK; - S3C24X0_REG32 EINTPEND; - S3C24X0_REG32 GSTATUS0; - S3C24X0_REG32 GSTATUS1; - S3C24X0_REG32 GSTATUS2; - S3C24X0_REG32 GSTATUS3; - S3C24X0_REG32 GSTATUS4; -#endif -}; - - -/* RTC (see manual chapter 17) */ -struct s3c24x0_rtc { -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[67]; - S3C24X0_REG8 RTCCON; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 TICNT; - S3C24X0_REG8 res3[11]; - S3C24X0_REG8 RTCALM; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 ALMSEC; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 ALMMIN; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 ALMHOUR; - S3C24X0_REG8 res7[3]; - S3C24X0_REG8 ALMDATE; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 ALMMON; - S3C24X0_REG8 res9[3]; - S3C24X0_REG8 ALMYEAR; - S3C24X0_REG8 res10[3]; - S3C24X0_REG8 RTCRST; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 BCDSEC; - S3C24X0_REG8 res12[3]; - S3C24X0_REG8 BCDMIN; - S3C24X0_REG8 res13[3]; - S3C24X0_REG8 BCDHOUR; - S3C24X0_REG8 res14[3]; - S3C24X0_REG8 BCDDATE; - S3C24X0_REG8 res15[3]; - S3C24X0_REG8 BCDDAY; - S3C24X0_REG8 res16[3]; - S3C24X0_REG8 BCDMON; - S3C24X0_REG8 res17[3]; - S3C24X0_REG8 BCDYEAR; -#else /* little endian */ - S3C24X0_REG8 res0[64]; - S3C24X0_REG8 RTCCON; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 TICNT; - S3C24X0_REG8 res2[11]; - S3C24X0_REG8 RTCALM; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 ALMSEC; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 ALMMIN; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 ALMHOUR; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 ALMDATE; - S3C24X0_REG8 res7[3]; - S3C24X0_REG8 ALMMON; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 ALMYEAR; - S3C24X0_REG8 res9[3]; - S3C24X0_REG8 RTCRST; - S3C24X0_REG8 res10[3]; - S3C24X0_REG8 BCDSEC; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 BCDMIN; - S3C24X0_REG8 res12[3]; - S3C24X0_REG8 BCDHOUR; - S3C24X0_REG8 res13[3]; - S3C24X0_REG8 BCDDATE; - S3C24X0_REG8 res14[3]; - S3C24X0_REG8 BCDDAY; - S3C24X0_REG8 res15[3]; - S3C24X0_REG8 BCDMON; - S3C24X0_REG8 res16[3]; - S3C24X0_REG8 BCDYEAR; - S3C24X0_REG8 res17[3]; -#endif -}; - - -/* ADC (see manual chapter 16) */ -struct s3c2400_adc { - S3C24X0_REG32 ADCCON; - S3C24X0_REG32 ADCDAT; -}; - - -/* ADC (see manual chapter 16) */ -struct s3c2410_adc { - S3C24X0_REG32 ADCCON; - S3C24X0_REG32 ADCTSC; - S3C24X0_REG32 ADCDLY; - S3C24X0_REG32 ADCDAT0; - S3C24X0_REG32 ADCDAT1; -}; - - -/* SPI (see manual chapter 22) */ -struct s3c24x0_spi_channel { - S3C24X0_REG8 SPCON; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 SPSTA; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 SPPIN; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 SPPRE; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 SPTDAT; - S3C24X0_REG8 res5[3]; - S3C24X0_REG8 SPRDAT; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 res7[16]; -}; - -struct s3c24x0_spi { - struct s3c24x0_spi_channel ch[S3C24X0_SPI_CHANNELS]; -}; - - -/* MMC INTERFACE (see S3C2400 manual chapter 19) */ -struct s3c2400_mmc { -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 MMCON; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 MMCRR; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 MMFCON; - S3C24X0_REG8 res4[3]; - S3C24X0_REG8 MMSTA; - S3C24X0_REG16 res5; - S3C24X0_REG16 MMFSTA; - S3C24X0_REG8 res6[3]; - S3C24X0_REG8 MMPRE; - S3C24X0_REG16 res7; - S3C24X0_REG16 MMLEN; - S3C24X0_REG8 res8[3]; - S3C24X0_REG8 MMCR7; - S3C24X0_REG32 MMRSP[4]; - S3C24X0_REG8 res9[3]; - S3C24X0_REG8 MMCMD0; - S3C24X0_REG32 MMCMD1; - S3C24X0_REG16 res10; - S3C24X0_REG16 MMCR16; - S3C24X0_REG8 res11[3]; - S3C24X0_REG8 MMDAT; -#else - S3C24X0_REG8 MMCON; - S3C24X0_REG8 res1[3]; - S3C24X0_REG8 MMCRR; - S3C24X0_REG8 res2[3]; - S3C24X0_REG8 MMFCON; - S3C24X0_REG8 res3[3]; - S3C24X0_REG8 MMSTA; - S3C24X0_REG8 res4[3]; - S3C24X0_REG16 MMFSTA; - S3C24X0_REG16 res5; - S3C24X0_REG8 MMPRE; - S3C24X0_REG8 res6[3]; - S3C24X0_REG16 MMLEN; - S3C24X0_REG16 res7; - S3C24X0_REG8 MMCR7; - S3C24X0_REG8 res8[3]; - S3C24X0_REG32 MMRSP[4]; - S3C24X0_REG8 MMCMD0; - S3C24X0_REG8 res9[3]; - S3C24X0_REG32 MMCMD1; - S3C24X0_REG16 MMCR16; - S3C24X0_REG16 res10; - S3C24X0_REG8 MMDAT; - S3C24X0_REG8 res11[3]; -#endif -}; - - -/* SD INTERFACE (see S3C2410 manual chapter 19) */ -struct s3c2410_sdi { - S3C24X0_REG32 SDICON; - S3C24X0_REG32 SDIPRE; - S3C24X0_REG32 SDICARG; - S3C24X0_REG32 SDICCON; - S3C24X0_REG32 SDICSTA; - S3C24X0_REG32 SDIRSP0; - S3C24X0_REG32 SDIRSP1; - S3C24X0_REG32 SDIRSP2; - S3C24X0_REG32 SDIRSP3; - S3C24X0_REG32 SDIDTIMER; - S3C24X0_REG32 SDIBSIZE; - S3C24X0_REG32 SDIDCON; - S3C24X0_REG32 SDIDCNT; - S3C24X0_REG32 SDIDSTA; - S3C24X0_REG32 SDIFSTA; -#ifdef __BIG_ENDIAN - S3C24X0_REG8 res[3]; - S3C24X0_REG8 SDIDAT; -#else - S3C24X0_REG8 SDIDAT; - S3C24X0_REG8 res[3]; -#endif - S3C24X0_REG32 SDIIMSK; -}; - -#endif /*__S3C24X0_H__*/ diff --git a/lib_generic/Makefile b/lib_generic/Makefile index 2ec261a..bfaf346 100644 --- a/lib_generic/Makefile +++ b/lib_generic/Makefile @@ -45,6 +45,7 @@ COBJS-y += sha1.o COBJS-$(CONFIG_SHA256) += sha256.o COBJS-y += string.o COBJS-y += strmhz.o +COBJS-y += time.o COBJS-y += vsprintf.o COBJS-y += zlib.o COBJS-$(CONFIG_RBTREE) += rbtree.o diff --git a/lib_generic/crc32.c b/lib_generic/crc32.c index b27048c..468b397 100644 --- a/lib_generic/crc32.c +++ b/lib_generic/crc32.c @@ -8,11 +8,11 @@ * For conditions of distribution and use, see copyright notice in zlib.h */ -#ifndef USE_HOSTCC /* Shut down "ANSI does not permit..." warnings */ +#ifndef USE_HOSTCC #include <common.h> -#else -#include <stdint.h> #endif +#include <compiler.h> +#include <u-boot/crc.h> #if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) #include <watchdog.h> @@ -22,6 +22,8 @@ #define local static #define ZEXPORT /* empty */ +#define tole(x) cpu_to_le32(x) + #ifdef DYNAMIC_CRC_TABLE local int crc_table_empty = 1; @@ -70,7 +72,7 @@ local void make_crc_table() c = (uLong)n; for (k = 0; k < 8; k++) c = c & 1 ? poly ^ (c >> 1) : c >> 1; - crc_table[n] = c; + crc_table[n] = tole(c); } crc_table_empty = 0; } @@ -78,59 +80,72 @@ local void make_crc_table() /* ======================================================================== * Table of CRC-32's of all single-byte values (made by make_crc_table) */ + local const uint32_t crc_table[256] = { - 0x00000000L, 0x77073096L, 0xee0e612cL, 0x990951baL, 0x076dc419L, - 0x706af48fL, 0xe963a535L, 0x9e6495a3L, 0x0edb8832L, 0x79dcb8a4L, - 0xe0d5e91eL, 0x97d2d988L, 0x09b64c2bL, 0x7eb17cbdL, 0xe7b82d07L, - 0x90bf1d91L, 0x1db71064L, 0x6ab020f2L, 0xf3b97148L, 0x84be41deL, - 0x1adad47dL, 0x6ddde4ebL, 0xf4d4b551L, 0x83d385c7L, 0x136c9856L, - 0x646ba8c0L, 0xfd62f97aL, 0x8a65c9ecL, 0x14015c4fL, 0x63066cd9L, - 0xfa0f3d63L, 0x8d080df5L, 0x3b6e20c8L, 0x4c69105eL, 0xd56041e4L, - 0xa2677172L, 0x3c03e4d1L, 0x4b04d447L, 0xd20d85fdL, 0xa50ab56bL, - 0x35b5a8faL, 0x42b2986cL, 0xdbbbc9d6L, 0xacbcf940L, 0x32d86ce3L, - 0x45df5c75L, 0xdcd60dcfL, 0xabd13d59L, 0x26d930acL, 0x51de003aL, - 0xc8d75180L, 0xbfd06116L, 0x21b4f4b5L, 0x56b3c423L, 0xcfba9599L, - 0xb8bda50fL, 0x2802b89eL, 0x5f058808L, 0xc60cd9b2L, 0xb10be924L, - 0x2f6f7c87L, 0x58684c11L, 0xc1611dabL, 0xb6662d3dL, 0x76dc4190L, - 0x01db7106L, 0x98d220bcL, 0xefd5102aL, 0x71b18589L, 0x06b6b51fL, - 0x9fbfe4a5L, 0xe8b8d433L, 0x7807c9a2L, 0x0f00f934L, 0x9609a88eL, - 0xe10e9818L, 0x7f6a0dbbL, 0x086d3d2dL, 0x91646c97L, 0xe6635c01L, - 0x6b6b51f4L, 0x1c6c6162L, 0x856530d8L, 0xf262004eL, 0x6c0695edL, - 0x1b01a57bL, 0x8208f4c1L, 0xf50fc457L, 0x65b0d9c6L, 0x12b7e950L, - 0x8bbeb8eaL, 0xfcb9887cL, 0x62dd1ddfL, 0x15da2d49L, 0x8cd37cf3L, - 0xfbd44c65L, 0x4db26158L, 0x3ab551ceL, 0xa3bc0074L, 0xd4bb30e2L, - 0x4adfa541L, 0x3dd895d7L, 0xa4d1c46dL, 0xd3d6f4fbL, 0x4369e96aL, - 0x346ed9fcL, 0xad678846L, 0xda60b8d0L, 0x44042d73L, 0x33031de5L, - 0xaa0a4c5fL, 0xdd0d7cc9L, 0x5005713cL, 0x270241aaL, 0xbe0b1010L, - 0xc90c2086L, 0x5768b525L, 0x206f85b3L, 0xb966d409L, 0xce61e49fL, - 0x5edef90eL, 0x29d9c998L, 0xb0d09822L, 0xc7d7a8b4L, 0x59b33d17L, - 0x2eb40d81L, 0xb7bd5c3bL, 0xc0ba6cadL, 0xedb88320L, 0x9abfb3b6L, - 0x03b6e20cL, 0x74b1d29aL, 0xead54739L, 0x9dd277afL, 0x04db2615L, - 0x73dc1683L, 0xe3630b12L, 0x94643b84L, 0x0d6d6a3eL, 0x7a6a5aa8L, - 0xe40ecf0bL, 0x9309ff9dL, 0x0a00ae27L, 0x7d079eb1L, 0xf00f9344L, - 0x8708a3d2L, 0x1e01f268L, 0x6906c2feL, 0xf762575dL, 0x806567cbL, - 0x196c3671L, 0x6e6b06e7L, 0xfed41b76L, 0x89d32be0L, 0x10da7a5aL, - 0x67dd4accL, 0xf9b9df6fL, 0x8ebeeff9L, 0x17b7be43L, 0x60b08ed5L, - 0xd6d6a3e8L, 0xa1d1937eL, 0x38d8c2c4L, 0x4fdff252L, 0xd1bb67f1L, - 0xa6bc5767L, 0x3fb506ddL, 0x48b2364bL, 0xd80d2bdaL, 0xaf0a1b4cL, - 0x36034af6L, 0x41047a60L, 0xdf60efc3L, 0xa867df55L, 0x316e8eefL, - 0x4669be79L, 0xcb61b38cL, 0xbc66831aL, 0x256fd2a0L, 0x5268e236L, - 0xcc0c7795L, 0xbb0b4703L, 0x220216b9L, 0x5505262fL, 0xc5ba3bbeL, - 0xb2bd0b28L, 0x2bb45a92L, 0x5cb36a04L, 0xc2d7ffa7L, 0xb5d0cf31L, - 0x2cd99e8bL, 0x5bdeae1dL, 0x9b64c2b0L, 0xec63f226L, 0x756aa39cL, - 0x026d930aL, 0x9c0906a9L, 0xeb0e363fL, 0x72076785L, 0x05005713L, - 0x95bf4a82L, 0xe2b87a14L, 0x7bb12baeL, 0x0cb61b38L, 0x92d28e9bL, - 0xe5d5be0dL, 0x7cdcefb7L, 0x0bdbdf21L, 0x86d3d2d4L, 0xf1d4e242L, - 0x68ddb3f8L, 0x1fda836eL, 0x81be16cdL, 0xf6b9265bL, 0x6fb077e1L, - 0x18b74777L, 0x88085ae6L, 0xff0f6a70L, 0x66063bcaL, 0x11010b5cL, - 0x8f659effL, 0xf862ae69L, 0x616bffd3L, 0x166ccf45L, 0xa00ae278L, - 0xd70dd2eeL, 0x4e048354L, 0x3903b3c2L, 0xa7672661L, 0xd06016f7L, - 0x4969474dL, 0x3e6e77dbL, 0xaed16a4aL, 0xd9d65adcL, 0x40df0b66L, - 0x37d83bf0L, 0xa9bcae53L, 0xdebb9ec5L, 0x47b2cf7fL, 0x30b5ffe9L, - 0xbdbdf21cL, 0xcabac28aL, 0x53b39330L, 0x24b4a3a6L, 0xbad03605L, - 0xcdd70693L, 0x54de5729L, 0x23d967bfL, 0xb3667a2eL, 0xc4614ab8L, - 0x5d681b02L, 0x2a6f2b94L, 0xb40bbe37L, 0xc30c8ea1L, 0x5a05df1bL, - 0x2d02ef8dL +tole(0x00000000L), tole(0x77073096L), tole(0xee0e612cL), tole(0x990951baL), +tole(0x076dc419L), tole(0x706af48fL), tole(0xe963a535L), tole(0x9e6495a3L), +tole(0x0edb8832L), tole(0x79dcb8a4L), tole(0xe0d5e91eL), tole(0x97d2d988L), +tole(0x09b64c2bL), tole(0x7eb17cbdL), tole(0xe7b82d07L), tole(0x90bf1d91L), +tole(0x1db71064L), tole(0x6ab020f2L), tole(0xf3b97148L), tole(0x84be41deL), +tole(0x1adad47dL), tole(0x6ddde4ebL), tole(0xf4d4b551L), tole(0x83d385c7L), +tole(0x136c9856L), tole(0x646ba8c0L), tole(0xfd62f97aL), tole(0x8a65c9ecL), +tole(0x14015c4fL), tole(0x63066cd9L), tole(0xfa0f3d63L), tole(0x8d080df5L), +tole(0x3b6e20c8L), tole(0x4c69105eL), tole(0xd56041e4L), tole(0xa2677172L), +tole(0x3c03e4d1L), tole(0x4b04d447L), tole(0xd20d85fdL), tole(0xa50ab56bL), +tole(0x35b5a8faL), tole(0x42b2986cL), tole(0xdbbbc9d6L), tole(0xacbcf940L), +tole(0x32d86ce3L), tole(0x45df5c75L), tole(0xdcd60dcfL), tole(0xabd13d59L), +tole(0x26d930acL), tole(0x51de003aL), tole(0xc8d75180L), tole(0xbfd06116L), +tole(0x21b4f4b5L), tole(0x56b3c423L), tole(0xcfba9599L), tole(0xb8bda50fL), +tole(0x2802b89eL), tole(0x5f058808L), tole(0xc60cd9b2L), tole(0xb10be924L), +tole(0x2f6f7c87L), tole(0x58684c11L), tole(0xc1611dabL), tole(0xb6662d3dL), +tole(0x76dc4190L), tole(0x01db7106L), tole(0x98d220bcL), tole(0xefd5102aL), +tole(0x71b18589L), tole(0x06b6b51fL), tole(0x9fbfe4a5L), tole(0xe8b8d433L), +tole(0x7807c9a2L), tole(0x0f00f934L), tole(0x9609a88eL), tole(0xe10e9818L), +tole(0x7f6a0dbbL), tole(0x086d3d2dL), tole(0x91646c97L), tole(0xe6635c01L), +tole(0x6b6b51f4L), tole(0x1c6c6162L), tole(0x856530d8L), tole(0xf262004eL), +tole(0x6c0695edL), tole(0x1b01a57bL), tole(0x8208f4c1L), tole(0xf50fc457L), +tole(0x65b0d9c6L), tole(0x12b7e950L), tole(0x8bbeb8eaL), tole(0xfcb9887cL), +tole(0x62dd1ddfL), tole(0x15da2d49L), tole(0x8cd37cf3L), tole(0xfbd44c65L), +tole(0x4db26158L), tole(0x3ab551ceL), tole(0xa3bc0074L), tole(0xd4bb30e2L), +tole(0x4adfa541L), tole(0x3dd895d7L), tole(0xa4d1c46dL), tole(0xd3d6f4fbL), +tole(0x4369e96aL), tole(0x346ed9fcL), tole(0xad678846L), tole(0xda60b8d0L), +tole(0x44042d73L), tole(0x33031de5L), tole(0xaa0a4c5fL), tole(0xdd0d7cc9L), +tole(0x5005713cL), tole(0x270241aaL), tole(0xbe0b1010L), tole(0xc90c2086L), +tole(0x5768b525L), tole(0x206f85b3L), tole(0xb966d409L), tole(0xce61e49fL), +tole(0x5edef90eL), tole(0x29d9c998L), tole(0xb0d09822L), tole(0xc7d7a8b4L), +tole(0x59b33d17L), tole(0x2eb40d81L), tole(0xb7bd5c3bL), tole(0xc0ba6cadL), +tole(0xedb88320L), tole(0x9abfb3b6L), tole(0x03b6e20cL), tole(0x74b1d29aL), +tole(0xead54739L), tole(0x9dd277afL), tole(0x04db2615L), tole(0x73dc1683L), +tole(0xe3630b12L), tole(0x94643b84L), tole(0x0d6d6a3eL), tole(0x7a6a5aa8L), +tole(0xe40ecf0bL), tole(0x9309ff9dL), tole(0x0a00ae27L), tole(0x7d079eb1L), +tole(0xf00f9344L), tole(0x8708a3d2L), tole(0x1e01f268L), tole(0x6906c2feL), +tole(0xf762575dL), tole(0x806567cbL), tole(0x196c3671L), tole(0x6e6b06e7L), +tole(0xfed41b76L), tole(0x89d32be0L), tole(0x10da7a5aL), tole(0x67dd4accL), +tole(0xf9b9df6fL), tole(0x8ebeeff9L), tole(0x17b7be43L), tole(0x60b08ed5L), +tole(0xd6d6a3e8L), tole(0xa1d1937eL), tole(0x38d8c2c4L), tole(0x4fdff252L), +tole(0xd1bb67f1L), tole(0xa6bc5767L), tole(0x3fb506ddL), tole(0x48b2364bL), +tole(0xd80d2bdaL), tole(0xaf0a1b4cL), tole(0x36034af6L), tole(0x41047a60L), +tole(0xdf60efc3L), tole(0xa867df55L), tole(0x316e8eefL), tole(0x4669be79L), +tole(0xcb61b38cL), tole(0xbc66831aL), tole(0x256fd2a0L), tole(0x5268e236L), +tole(0xcc0c7795L), tole(0xbb0b4703L), tole(0x220216b9L), tole(0x5505262fL), +tole(0xc5ba3bbeL), tole(0xb2bd0b28L), tole(0x2bb45a92L), tole(0x5cb36a04L), +tole(0xc2d7ffa7L), tole(0xb5d0cf31L), tole(0x2cd99e8bL), tole(0x5bdeae1dL), +tole(0x9b64c2b0L), tole(0xec63f226L), tole(0x756aa39cL), tole(0x026d930aL), +tole(0x9c0906a9L), tole(0xeb0e363fL), tole(0x72076785L), tole(0x05005713L), +tole(0x95bf4a82L), tole(0xe2b87a14L), tole(0x7bb12baeL), tole(0x0cb61b38L), +tole(0x92d28e9bL), tole(0xe5d5be0dL), tole(0x7cdcefb7L), tole(0x0bdbdf21L), +tole(0x86d3d2d4L), tole(0xf1d4e242L), tole(0x68ddb3f8L), tole(0x1fda836eL), +tole(0x81be16cdL), tole(0xf6b9265bL), tole(0x6fb077e1L), tole(0x18b74777L), +tole(0x88085ae6L), tole(0xff0f6a70L), tole(0x66063bcaL), tole(0x11010b5cL), +tole(0x8f659effL), tole(0xf862ae69L), tole(0x616bffd3L), tole(0x166ccf45L), +tole(0xa00ae278L), tole(0xd70dd2eeL), tole(0x4e048354L), tole(0x3903b3c2L), +tole(0xa7672661L), tole(0xd06016f7L), tole(0x4969474dL), tole(0x3e6e77dbL), +tole(0xaed16a4aL), tole(0xd9d65adcL), tole(0x40df0b66L), tole(0x37d83bf0L), +tole(0xa9bcae53L), tole(0xdebb9ec5L), tole(0x47b2cf7fL), tole(0x30b5ffe9L), +tole(0xbdbdf21cL), tole(0xcabac28aL), tole(0x53b39330L), tole(0x24b4a3a6L), +tole(0xbad03605L), tole(0xcdd70693L), tole(0x54de5729L), tole(0x23d967bfL), +tole(0xb3667a2eL), tole(0xc4614ab8L), tole(0x5d681b02L), tole(0x2a6f2b94L), +tole(0xb40bbe37L), tole(0xc30c8ea1L), tole(0x5a05df1bL), tole(0x2d02ef8dL) }; #endif @@ -148,54 +163,63 @@ const uint32_t * ZEXPORT get_crc_table() #endif /* ========================================================================= */ -#define DO1(buf) crc = crc_table[((int)crc ^ (*buf++)) & 0xff] ^ (crc >> 8); -#define DO2(buf) DO1(buf); DO1(buf); -#define DO4(buf) DO2(buf); DO2(buf); -#define DO8(buf) DO4(buf); DO4(buf); +# ifdef __LITTLE_ENDIAN +# define DO_CRC(x) crc = tab[(crc ^ (x)) & 255] ^ (crc >> 8) +# else +# define DO_CRC(x) crc = tab[((crc >> 24) ^ (x)) & 255] ^ (crc << 8) +# endif /* ========================================================================= */ -uint32_t ZEXPORT crc32 (uint32_t crc, const Bytef *buf, uInt len) -{ -#ifdef DYNAMIC_CRC_TABLE - if (crc_table_empty) - make_crc_table(); -#endif - crc = crc ^ 0xffffffffL; - while (len >= 8) - { - DO8(buf); - len -= 8; - } - if (len) do { - DO1(buf); - } while (--len); - return crc ^ 0xffffffffL; -} - -#if defined(CONFIG_CMD_JFFS2) || defined(CONFIG_CMD_NAND) /* No ones complement version. JFFS2 (and other things ?) * don't use ones compliment in their CRC calculations. */ uint32_t ZEXPORT crc32_no_comp(uint32_t crc, const Bytef *buf, uInt len) { + const uint32_t *tab = crc_table; + const uint32_t *b =(const uint32_t *)buf; + size_t rem_len; #ifdef DYNAMIC_CRC_TABLE if (crc_table_empty) make_crc_table(); #endif - while (len >= 8) - { - DO8(buf); - len -= 8; + crc = cpu_to_le32(crc); + /* Align it */ + if (((long)b) & 3 && len) { + uint8_t *p = (uint8_t *)b; + do { + DO_CRC(*p++); + } while ((--len) && ((long)p)&3); + b = (uint32_t *)p; + } + + rem_len = len & 3; + len = len >> 2; + for (--b; len; --len) { + /* load data 32 bits wide, xor data 32 bits wide. */ + crc ^= *++b; /* use pre increment for speed */ + DO_CRC(0); + DO_CRC(0); + DO_CRC(0); + DO_CRC(0); + } + len = rem_len; + /* And the last few bytes */ + if (len) { + uint8_t *p = (uint8_t *)(b + 1) - 1; + do { + DO_CRC(*++p); /* use pre increment for speed */ + } while (--len); } - if (len) do { - DO1(buf); - } while (--len); - return crc; + return le32_to_cpu(crc); } +#undef DO_CRC -#endif +uint32_t ZEXPORT crc32 (uint32_t crc, const Bytef *p, uInt len) +{ + return crc32_no_comp(crc ^ 0xffffffffL, p, len) ^ 0xffffffffL; +} /* * Calculate the crc32 checksum triggering the watchdog every 'chunk_sz' bytes diff --git a/lib_generic/lzo/lzo1x_decompress.c b/lib_generic/lzo/lzo1x_decompress.c index 2780e11..09bdc8f 100644 --- a/lib_generic/lzo/lzo1x_decompress.c +++ b/lib_generic/lzo/lzo1x_decompress.c @@ -24,6 +24,93 @@ #define COPY4(dst, src) \ put_unaligned(get_unaligned((const u32 *)(src)), (u32 *)(dst)) +static const unsigned char lzop_magic[] = { + 0x89, 0x4c, 0x5a, 0x4f, 0x00, 0x0d, 0x0a, 0x1a, 0x0a +}; + +#define HEADER_HAS_FILTER 0x00000800L + +static inline const unsigned char *parse_header(const unsigned char *src) +{ + u8 level = 0; + u16 version; + int i; + + /* read magic: 9 first bytes */ + for (i = 0; i < ARRAY_SIZE(lzop_magic); i++) { + if (*src++ != lzop_magic[i]) + return NULL; + } + /* get version (2bytes), skip library version (2), + * 'need to be extracted' version (2) and + * method (1) */ + version = get_unaligned_be16(src); + src += 7; + if (version >= 0x0940) + level = *src++; + if (get_unaligned_be32(src) & HEADER_HAS_FILTER) + src += 4; /* filter info */ + + /* skip flags, mode and mtime_low */ + src += 12; + if (version >= 0x0940) + src += 4; /* skip mtime_high */ + + i = *src++; + /* don't care about the file name, and skip checksum */ + src += i + 4; + + return src; +} + +int lzop_decompress(const unsigned char *src, size_t src_len, + unsigned char *dst, size_t *dst_len) +{ + unsigned char *start = dst; + const unsigned char *send = src + src_len; + u32 slen, dlen; + size_t tmp; + int r; + + src = parse_header(src); + if (!src) + return LZO_E_ERROR; + + while (src < send) { + /* read uncompressed block size */ + dlen = get_unaligned_be32(src); + src += 4; + + /* exit if last block */ + if (dlen == 0) { + *dst_len = dst - start; + return LZO_E_OK; + } + + /* read compressed block size, and skip block checksum info */ + slen = get_unaligned_be32(src); + src += 8; + + if (slen <= 0 || slen > dlen) + return LZO_E_ERROR; + + /* decompress */ + tmp = dlen; + r = lzo1x_decompress_safe((u8 *) src, slen, dst, &tmp); + + if (r != LZO_E_OK) + return r; + + if (dlen != tmp) + return LZO_E_ERROR; + + src += slen; + dst += dlen; + } + + return LZO_E_INPUT_OVERRUN; +} + int lzo1x_decompress_safe(const unsigned char *in, size_t in_len, unsigned char *out, size_t *out_len) { diff --git a/lib_generic/time.c b/lib_generic/time.c new file mode 100644 index 0000000..a309c26 --- /dev/null +++ b/lib_generic/time.c @@ -0,0 +1,43 @@ +/* + * (C) Copyright 2000-2009 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <watchdog.h> + +#ifndef CONFIG_WD_PERIOD +# define CONFIG_WD_PERIOD (10 * 1000 * 1000) /* 10 seconds default*/ +#endif + +/* ------------------------------------------------------------------------- */ + +void udelay(unsigned long usec) +{ + ulong kv; + + do { + WATCHDOG_RESET(); + kv = usec > CONFIG_WD_PERIOD ? CONFIG_WD_PERIOD : usec; + __udelay (kv); + usec -= kv; + } while(usec); +} diff --git a/lib_generic/vsprintf.c b/lib_generic/vsprintf.c index 3d95728..8c58a93 100644 --- a/lib_generic/vsprintf.c +++ b/lib_generic/vsprintf.c @@ -21,21 +21,10 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); #endif -#ifdef CONFIG_SYS_64BIT_VSPRINTF #include <div64.h> # define NUM_TYPE long long -#else -# define NUM_TYPE long -#define do_div(n, base) ({ \ - unsigned int __res; \ - __res = ((unsigned NUM_TYPE) n) % base; \ - n = ((unsigned NUM_TYPE) n) / base; \ - __res; \ -}) -#endif #define noinline __attribute__((noinline)) - const char hex_asc[] = "0123456789abcdef"; #define hex_asc_lo(x) hex_asc[((x) & 0x0f)] #define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4] @@ -104,7 +93,6 @@ int ustrtoul(const char *cp, char **endp, unsigned int base) return result; } -#ifdef CONFIG_SYS_64BIT_STRTOUL unsigned long long simple_strtoull (const char *cp, char **endp, unsigned int base) { unsigned long long result = 0, value; @@ -132,7 +120,6 @@ unsigned long long simple_strtoull (const char *cp, char **endp, unsigned int ba *endp = (char *) cp; return result; } -#endif /* CONFIG_SYS_64BIT_STRTOUL */ /* we use this so that we can do without the ctype library */ #define is_digit(c) ((c) >= '0' && (c) <= '9') @@ -631,12 +618,9 @@ int vsprintf(char *buf, const char *fmt, va_list args) --fmt; continue; } -#ifdef CONFIG_SYS_64BIT_VSPRINTF if (qualifier == 'L') /* "quad" for 64 bit variables */ num = va_arg(args, unsigned long long); - else -#endif - if (qualifier == 'l') { + else if (qualifier == 'l') { num = va_arg(args, unsigned long); if (flags & SIGN) num = (signed long) num; diff --git a/lib_generic/zlib.c b/lib_generic/zlib.c index ef1fa22..26e5af1 100644 --- a/lib_generic/zlib.c +++ b/lib_generic/zlib.c @@ -26,8 +26,10 @@ #define ZUTIL_H #define ZLIB_INTERNAL -#include "u-boot/zlib.h" #include <common.h> +#include <compiler.h> +#include <asm/unaligned.h> +#include "u-boot/zlib.h" #undef OFF /* avoid conflicts */ /* To avoid a build time warning */ @@ -402,6 +404,7 @@ void inflate_fast OF((z_streamp strm, unsigned start)); */ #define OFF 1 #define PUP(a) *++(a) +#define UP_UNALIGNED(a) get_unaligned(++(a)) /* Decode literal, length, and distance codes and write out the resulting @@ -618,18 +621,47 @@ unsigned start; /* inflate()'s starting value for strm->avail_out */ } } else { + unsigned short *sout; + unsigned long loops; + from = out - dist; /* copy direct from output */ - do { /* minimum length is three */ - PUP(out) = PUP(from); - PUP(out) = PUP(from); - PUP(out) = PUP(from); - len -= 3; - } while (len > 2); - if (len) { - PUP(out) = PUP(from); - if (len > 1) - PUP(out) = PUP(from); - } + /* minimum length is three */ + /* Align out addr */ + if (!((long)(out - 1 + OFF) & 1)) { + PUP(out) = PUP(from); + len--; + } + sout = (unsigned short *)(out - OFF); + if (dist > 2 ) { + unsigned short *sfrom; + + sfrom = (unsigned short *)(from - OFF); + loops = len >> 1; + do + PUP(sout) = UP_UNALIGNED(sfrom); + while (--loops); + out = (unsigned char *)sout + OFF; + from = (unsigned char *)sfrom + OFF; + } else { /* dist == 1 or dist == 2 */ + unsigned short pat16; + + pat16 = *(sout-2+2*OFF); + if (dist == 1) +#if defined(__BIG_ENDIAN) + pat16 = (pat16 & 0xff) | ((pat16 & 0xff ) << 8); +#elif defined(__LITTLE_ENDIAN) + pat16 = (pat16 & 0xff00) | ((pat16 & 0xff00 ) >> 8); +#else +#error __BIG_ENDIAN nor __LITTLE_ENDIAN is defined +#endif + loops = len >> 1; + do + PUP(sout) = pat16; + while (--loops); + out = (unsigned char *)sout + OFF; + } + if (len & 1) + PUP(out) = PUP(from); } } else if ((op & 64) == 0) { /* 2nd level distance code */ diff --git a/lib_i386/Makefile b/lib_i386/Makefile index bb9b330..9838506 100644 --- a/lib_i386/Makefile +++ b/lib_i386/Makefile @@ -32,16 +32,16 @@ SOBJS-y += realmode_switch.o COBJS-y += bios_setup.o COBJS-y += board.o COBJS-y += bootm.o +COBJS-y += interrupts.o +COBJS-$(CONFIG_SYS_PCAT_INTERRUPTS) += pcat_interrupts.o +COBJS-$(CONFIG_SYS_GENERIC_TIMER) += pcat_timer.o COBJS-$(CONFIG_PCI) += pci.o COBJS-$(CONFIG_PCI) += pci_type1.o COBJS-y += realmode.o +COBJS-y += timer.o COBJS-y += video_bios.o COBJS-y += video.o COBJS-y += zimage.o -COBJS-y += interrupts.o -COBJS-y += timer.o -COBJS-$(CONFIG_SYS_PCAT_INTERRUPTS) += pcat_interrupts.o -COBJS-$(CONFIG_SYS_GENERIC_TIMER) += pcat_timer.o SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y)) diff --git a/lib_i386/bios.S b/lib_i386/bios.S index d6ca3e3..48f1b81 100644 --- a/lib_i386/bios.S +++ b/lib_i386/bios.S @@ -50,134 +50,200 @@ jmp realmode_reset .globl rm_int00 +.hidden rm_int00 +.type rm_int00, @function rm_int00: pushw $0 jmp any_interrupt16 .globl rm_int01 +.hidden rm_int01 +.type rm_int01, @function rm_int01: pushw $1 jmp any_interrupt16 .globl rm_int02 +.hidden rm_int02 +.type rm_int02, @function rm_int02: pushw $2 jmp any_interrupt16 .globl rm_int03 +.hidden rm_int03 +.type rm_int03, @function rm_int03: pushw $3 jmp any_interrupt16 .globl rm_int04 +.hidden rm_int04 +.type rm_int04, @function rm_int04: pushw $4 jmp any_interrupt16 .globl rm_int05 +.hidden rm_int05 +.type rm_int05, @function rm_int05: pushw $5 jmp any_interrupt16 .globl rm_int06 +.hidden rm_int06 +.type rm_int06, @function rm_int06: pushw $6 jmp any_interrupt16 .globl rm_int07 +.hidden rm_int07 +.type rm_int07, @function rm_int07: pushw $7 jmp any_interrupt16 .globl rm_int08 +.hidden rm_int08 +.type rm_int08, @function rm_int08: pushw $8 jmp any_interrupt16 .globl rm_int09 +.hidden rm_int09 +.type rm_int09, @function rm_int09: pushw $9 jmp any_interrupt16 .globl rm_int0a +.hidden rm_int0a +.type rm_int0a, @function rm_int0a: pushw $10 jmp any_interrupt16 .globl rm_int0b +.hidden rm_int0b +.type rm_int0b, @function rm_int0b: pushw $11 jmp any_interrupt16 .globl rm_int0c +.hidden rm_int0c +.type rm_int0c, @function rm_int0c: pushw $12 jmp any_interrupt16 .globl rm_int0d +.hidden rm_int0d +.type rm_int0d, @function rm_int0d: pushw $13 jmp any_interrupt16 .globl rm_int0e +.hidden rm_int0e +.type rm_int0e, @function rm_int0e: pushw $14 jmp any_interrupt16 .globl rm_int0f +.hidden rm_int0f +.type rm_int0f, @function rm_int0f: pushw $15 jmp any_interrupt16 .globl rm_int10 +.hidden rm_int10 +.type rm_int10, @function rm_int10: pushw $16 jmp any_interrupt16 .globl rm_int11 +.hidden rm_int11 +.type rm_int11, @function rm_int11: pushw $17 jmp any_interrupt16 .globl rm_int12 +.hidden rm_int12 +.type rm_int12, @function rm_int12: pushw $18 jmp any_interrupt16 .globl rm_int13 +.hidden rm_int13 +.type rm_int13, @function rm_int13: pushw $19 jmp any_interrupt16 .globl rm_int14 +.hidden rm_int14 +.type rm_int14, @function rm_int14: pushw $20 jmp any_interrupt16 .globl rm_int15 +.hidden rm_int15 +.type rm_int15, @function rm_int15: pushw $21 jmp any_interrupt16 .globl rm_int16 +.hidden rm_int16 +.type rm_int16, @function rm_int16: pushw $22 jmp any_interrupt16 .globl rm_int17 +.hidden rm_int17 +.type rm_int17, @function rm_int17: pushw $23 jmp any_interrupt16 .globl rm_int18 +.hidden rm_int18 +.type rm_int18, @function rm_int18: pushw $24 jmp any_interrupt16 .globl rm_int19 +.hidden rm_int19 +.type rm_int19, @function rm_int19: pushw $25 jmp any_interrupt16 .globl rm_int1a +.hidden rm_int1a +.type rm_int1a, @function rm_int1a: pushw $26 jmp any_interrupt16 .globl rm_int1b +.hidden rm_int1b +.type rm_int1b, @function rm_int1b: pushw $27 jmp any_interrupt16 .globl rm_int1c +.hidden rm_int1c +.type rm_int1c, @function rm_int1c: pushw $28 jmp any_interrupt16 .globl rm_int1d +.hidden rm_int1d +.type rm_int1d, @function rm_int1d: pushw $29 jmp any_interrupt16 .globl rm_int1e +.hidden rm_int1e +.type rm_int1e, @function rm_int1e: pushw $30 jmp any_interrupt16 .globl rm_int1f +.hidden rm_int1f +.type rm_int1f, @function rm_int1f: pushw $31 jmp any_interrupt16 .globl rm_def_int +.hidden rm_def_int +.type rm_def_int, @function rm_def_int: iret @@ -454,9 +520,13 @@ Lfunc_b1h: .globl ram_in_64kb_chunks +.hidden ram_in_64kb_chunks +.type ram_in_64kb_chunks, @function ram_in_64kb_chunks: .word 0 .globl bios_equipment +.hidden bios_equipment +.type bios_equipment, @function bios_equipment: .word 0 diff --git a/lib_i386/bios_pci.S b/lib_i386/bios_pci.S index 67fd00b..9e412e5 100644 --- a/lib_i386/bios_pci.S +++ b/lib_i386/bios_pci.S @@ -34,6 +34,8 @@ .section .bios, "ax" .code16 .globl realmode_pci_bios_call_entry +.hidden realmode_pci_bios_call_entry +.type realmode_pci_bios_call_entry, @function realmode_pci_bios_call_entry: MAKE_BIOS_STACK call realmode_pci_bios diff --git a/lib_i386/bios_setup.c b/lib_i386/bios_setup.c index 33c842c..6491e52 100644 --- a/lib_i386/bios_setup.c +++ b/lib_i386/bios_setup.c @@ -45,6 +45,9 @@ DECLARE_GLOBAL_DATA_PTR; #define BIOS_BASE ((char*)0xf0000) #define BIOS_CS 0xf000 +extern ulong _i386boot_bios; +extern ulong _i386boot_bios_size; + /* these are defined in a 16bit segment and needs * to be accessed with the RELOC_16_xxxx() macros below */ @@ -138,6 +141,9 @@ static void setvector(int vector, u16 segment, void *handler) int bios_setup(void) { + ulong i386boot_bios = (ulong)&_i386boot_bios; + ulong i386boot_bios_size = (ulong)&_i386boot_bios_size; + static int done=0; int vector; #ifdef CONFIG_PCI diff --git a/lib_i386/board.c b/lib_i386/board.c index 12ca20f..f3b6348 100644 --- a/lib_i386/board.c +++ b/lib_i386/board.c @@ -38,6 +38,7 @@ #include <net.h> #include <ide.h> #include <asm/u-boot-i386.h> +#include <elf.h> #ifdef CONFIG_BITBANGMII #include <miiphy.h> @@ -45,53 +46,16 @@ DECLARE_GLOBAL_DATA_PTR; -extern long _i386boot_start; -extern long _i386boot_end; -extern long _i386boot_romdata_start; -extern long _i386boot_romdata_dest; -extern long _i386boot_romdata_size; -extern long _i386boot_bss_start; -extern long _i386boot_bss_size; - -extern long _i386boot_realmode; -extern long _i386boot_realmode_size; -extern long _i386boot_bios; -extern long _i386boot_bios_size; - -/* The symbols defined by the linker script becomes pointers - * which is somewhat inconveient ... */ -ulong i386boot_start = (ulong)&_i386boot_start; /* code start (in flash) defined in start.S */ -ulong i386boot_end = (ulong)&_i386boot_end; /* code end (in flash) */ -ulong i386boot_romdata_start = (ulong)&_i386boot_romdata_start; /* datasegment in flash (also code+rodata end) */ -ulong i386boot_romdata_dest = (ulong)&_i386boot_romdata_dest; /* data location segment in ram */ -ulong i386boot_romdata_size = (ulong)&_i386boot_romdata_size; /* size of data segment */ -ulong i386boot_bss_start = (ulong)&_i386boot_bss_start; /* bss start */ -ulong i386boot_bss_size = (ulong)&_i386boot_bss_size; /* bss size */ - -ulong i386boot_realmode = (ulong)&_i386boot_realmode; /* start of realmode entry code */ -ulong i386boot_realmode_size = (ulong)&_i386boot_realmode_size; /* size of realmode entry code */ -ulong i386boot_bios = (ulong)&_i386boot_bios; /* start of BIOS emulation code */ -ulong i386boot_bios_size = (ulong)&_i386boot_bios_size; /* size of BIOS emulation code */ - - +/* Exports from the Linker Script */ +extern ulong _i386boot_text_start; +extern ulong _i386boot_rel_dyn_start; +extern ulong _i386boot_rel_dyn_end; +extern ulong _i386boot_bss_start; +extern ulong _i386boot_bss_size; +void ram_bootstrap (void *); const char version_string[] = U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")"; -static int mem_malloc_init(void) -{ - /* start malloc area right after the stack */ - mem_malloc_start = i386boot_bss_start + - i386boot_bss_size + CONFIG_SYS_STACK_SIZE; - mem_malloc_start = (mem_malloc_start+3)&~3; - - /* Use all available RAM for malloc() */ - mem_malloc_end = gd->ram_size; - - mem_malloc_brk = mem_malloc_start; - - return 0; -} - /************************************************************************ * Init Utilities * ************************************************************************ @@ -115,6 +79,7 @@ static int display_banner (void) { printf ("\n\n%s\n\n", version_string); +/* printf ("U-Boot code: %08lX -> %08lX data: %08lX -> %08lX\n" " BSS: %08lX -> %08lX stack: %08lX -> %08lX\n", i386boot_start, i386boot_romdata_start-1, @@ -123,6 +88,7 @@ static int display_banner (void) i386boot_bss_start+i386boot_bss_size, i386boot_bss_start+i386boot_bss_size+CONFIG_SYS_STACK_SIZE-1); +*/ return (0); } @@ -154,7 +120,6 @@ static void display_flash_config (ulong size) print_size (size, "\n"); } - /* * Breath some life into the board... * @@ -166,6 +131,7 @@ static void display_flash_config (ulong size) * can relocate the monitor code to RAM. */ + /* * All attempts to come up with a "common" initialization sequence * that works for all boards and architectures failed: some of the @@ -181,13 +147,12 @@ static void display_flash_config (ulong size) typedef int (init_fnc_t) (void); init_fnc_t *init_sequence[] = { - cpu_init, /* basic cpu dependent setup */ - board_init, /* basic board dependent setup */ + serial_init, + cpu_init_r, /* basic cpu dependent setup */ + board_early_init_r, /* basic board dependent setup */ dram_init, /* configure available RAM banks */ - mem_malloc_init, /* dependant on dram_init */ interrupt_init, /* set up exceptions */ timer_init, - serial_init, env_init, /* initialize environment */ init_baudrate, /* initialze baudrate settings */ serial_init, /* serial communications setup */ @@ -199,21 +164,86 @@ init_fnc_t *init_sequence[] = { gd_t *gd; -void start_i386boot (void) +/* + * Load U-Boot into RAM, initialize BSS, perform relocation adjustments + */ +void board_init_f (ulong stack_limit) +{ + void *text_start = &_i386boot_text_start; + void *u_boot_cmd_end = &__u_boot_cmd_end; + Elf32_Rel *rel_dyn_start = (Elf32_Rel *)&_i386boot_rel_dyn_start; + Elf32_Rel *rel_dyn_end = (Elf32_Rel *)&_i386boot_rel_dyn_end; + void *bss_start = &_i386boot_bss_start; + void *bss_size = &_i386boot_bss_size; + + size_t uboot_size; + void *ram_start; + ulong rel_offset; + Elf32_Rel *re; + + void (*start_func)(void *); + + /* compiler optimization barrier needed for GCC >= 3.4 */ + __asm__ __volatile__("": : :"memory"); + + uboot_size = (size_t)u_boot_cmd_end - (size_t)text_start; + ram_start = (void *)stack_limit - (uboot_size + (ulong)bss_size); + rel_offset = text_start - ram_start; + start_func = ram_bootstrap - rel_offset; + + /* First stage CPU initialization */ + if (cpu_init_f() != 0) + hang(); + + /* First stage Board initialization */ + if (board_early_init_f() != 0) + hang(); + + /* Copy U-Boot into RAM */ + memcpy(ram_start, text_start, (size_t)uboot_size); + + /* Clear BSS */ + memset(bss_start - rel_offset, 0, (size_t)bss_size); + + /* Perform relocation adjustments */ + for (re = rel_dyn_start; re < rel_dyn_end; re++) + { + if (re->r_offset >= TEXT_BASE) + if (*(ulong *)re->r_offset >= TEXT_BASE) + *(ulong *)(re->r_offset - rel_offset) -= (Elf32_Addr)rel_offset; + } + + start_func(ram_start); + + /* NOTREACHED - relocate_code() does not return */ + while(1); +} + +/* + * All attempts to jump straight from board_init_f() to board_init_r() + * have failed, hence this special 'bootstrap' function. + */ +void ram_bootstrap (void *ram_start) +{ + static gd_t gd_data; + + /* compiler optimization barrier needed for GCC >= 3.4 */ + __asm__ __volatile__("": : :"memory"); + + board_init_r(&gd_data, (ulong)ram_start); +} + +void board_init_r(gd_t *id, ulong ram_start) { char *s; int i; ulong size; - static gd_t gd_data; static bd_t bd_data; init_fnc_t **init_fnc_ptr; -#ifndef CONFIG_SKIP_RELOCATE_UBOOT - cmd_tbl_t *p; -#endif show_boot_progress(0x21); - gd = &gd_data; + gd = id; /* compiler optimization barrier needed for GCC >= 3.4 */ __asm__ __volatile__("": : :"memory"); @@ -224,10 +254,11 @@ void start_i386boot (void) gd->baudrate = CONFIG_BAUDRATE; -#ifndef CONFIG_SKIP_RELOCATE_UBOOT - /* Need to set relocation offset here for interrupt initialization */ - gd->reloc_off = CONFIG_SYS_BL_START_RAM - TEXT_BASE; -#endif + gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ + + mem_malloc_init((((ulong)ram_start - CONFIG_SYS_MALLOC_LEN)+3)&~3, + CONFIG_SYS_MALLOC_LEN); + for (init_fnc_ptr = init_sequence, i=0; *init_fnc_ptr; ++init_fnc_ptr, i++) { show_boot_progress(0xa130|i); @@ -237,26 +268,6 @@ void start_i386boot (void) } show_boot_progress(0x23); -#ifndef CONFIG_SKIP_RELOCATE_UBOOT - for (p = &__u_boot_cmd_start; p != &__u_boot_cmd_end; p++) { - ulong addr; - addr = (ulong) (p->cmd) + gd->reloc_off; - p->cmd = (int (*)(struct cmd_tbl_s *, int, int, char *[]))addr; - addr = (ulong)(p->name) + gd->reloc_off; - p->name = (char *)addr; - - if (p->usage != NULL) { - addr = (ulong)(p->usage) + gd->reloc_off; - p->usage = (char *)addr; - } - #ifdef CONFIG_SYS_LONGHELP - if (p->help != NULL) { - addr = (ulong)(p->help) + gd->reloc_off; - p->help = (char *)addr; - } - #endif - } -#endif /* configure available FLASH banks */ size = flash_init(); display_flash_config(size); diff --git a/lib_i386/interrupts.c b/lib_i386/interrupts.c index 3f3613a..51def59 100644 --- a/lib_i386/interrupts.c +++ b/lib_i386/interrupts.c @@ -70,12 +70,12 @@ void irq_install_handler(int irq, interrupt_handler_t *handler, void *arg) if (irq_handlers[irq].handler != NULL) printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n", - (ulong) handler + gd->reloc_off, + (ulong) handler, (ulong) irq_handlers[irq].handler); status = disable_interrupts (); - irq_handlers[irq].handler = handler + gd->reloc_off; + irq_handlers[irq].handler = handler; irq_handlers[irq].arg = arg; irq_handlers[irq].count = 0; @@ -109,8 +109,10 @@ void irq_free_handler(int irq) return; } -__isr__ do_irq(int irq) +void do_irq(int hw_irq) { + int irq = hw_irq - 0x20; + if (irq < 0 || irq >= CONFIG_SYS_NUM_IRQS) { printf("do_irq: bad irq number %d\n", irq); return; diff --git a/lib_i386/pcat_interrupts.c b/lib_i386/pcat_interrupts.c index f01298e..67e6e97 100644 --- a/lib_i386/pcat_interrupts.c +++ b/lib_i386/pcat_interrupts.c @@ -40,45 +40,12 @@ #error "CONFIG_SYS_NUM_IRQS must equal 16 if CONFIG_SYS_NUM_IRQS is defined" #endif -DECLARE_INTERRUPT(0); -DECLARE_INTERRUPT(1); -DECLARE_INTERRUPT(3); -DECLARE_INTERRUPT(4); -DECLARE_INTERRUPT(5); -DECLARE_INTERRUPT(6); -DECLARE_INTERRUPT(7); -DECLARE_INTERRUPT(8); -DECLARE_INTERRUPT(9); -DECLARE_INTERRUPT(10); -DECLARE_INTERRUPT(11); -DECLARE_INTERRUPT(12); -DECLARE_INTERRUPT(13); -DECLARE_INTERRUPT(14); -DECLARE_INTERRUPT(15); - int interrupt_init(void) { u8 i; disable_interrupts(); - /* Setup interrupts */ - set_vector(0x20, irq_0); - set_vector(0x21, irq_1); - set_vector(0x23, irq_3); - set_vector(0x24, irq_4); - set_vector(0x25, irq_5); - set_vector(0x26, irq_6); - set_vector(0x27, irq_7); - set_vector(0x28, irq_8); - set_vector(0x29, irq_9); - set_vector(0x2a, irq_10); - set_vector(0x2b, irq_11); - set_vector(0x2c, irq_12); - set_vector(0x2d, irq_13); - set_vector(0x2e, irq_14); - set_vector(0x2f, irq_15); - /* Mask all interrupts */ outb(0xff, MASTER_PIC + IMR); outb(0xff, SLAVE_PIC + IMR); diff --git a/lib_i386/pcat_timer.c b/lib_i386/pcat_timer.c index c351b23..1373fd1 100644 --- a/lib_i386/pcat_timer.c +++ b/lib_i386/pcat_timer.c @@ -71,7 +71,7 @@ static u16 read_pit(void) } /* this is not very exact */ -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { int counter; int wraps; diff --git a/lib_i386/realmode.c b/lib_i386/realmode.c index 6cf2738..3c3c1fc 100644 --- a/lib_i386/realmode.c +++ b/lib_i386/realmode.c @@ -31,10 +31,15 @@ #define REALMODE_MAILBOX ((char*)0xe00) +extern ulong _i386boot_realmode; +extern ulong _i386boot_realmode_size; extern char realmode_enter; int realmode_setup(void) { + ulong i386boot_realmode = (ulong)&_i386boot_realmode; + ulong i386boot_realmode_size = (ulong)&_i386boot_realmode_size; + /* copy the realmode switch code */ if (i386boot_realmode_size > (REALMODE_MAILBOX-REALMODE_BASE)) { printf("realmode switch too large (%ld bytes, max is %d)\n", diff --git a/lib_i386/timer.c b/lib_i386/timer.c index 58a0212..5cb1f54 100644 --- a/lib_i386/timer.c +++ b/lib_i386/timer.c @@ -51,7 +51,7 @@ int register_timer_isr (timer_fnc_t *isr_func) if (new_func == NULL) return 1; - new_func->isr_func = isr_func + gd->reloc_off; + new_func->isr_func = isr_func; new_func->next = NULL; /* diff --git a/lib_m68k/time.c b/lib_m68k/time.c index 29269f6..7eaea5e 100644 --- a/lib_m68k/time.c +++ b/lib_m68k/time.c @@ -47,7 +47,7 @@ static volatile ulong timestamp = 0; #endif extern void dtimer_intr_setup(void); -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { volatile dtmr_t *timerp = (dtmr_t *) (CONFIG_SYS_UDELAY_BASE); uint start, now, tmp; @@ -139,7 +139,7 @@ void set_timer(ulong t) static unsigned short lastinc; -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { volatile pit_t *timerp = (pit_t *) (CONFIG_SYS_UDELAY_BASE); uint tmp; diff --git a/lib_microblaze/time.c b/lib_microblaze/time.c index cbb4341..da016a0 100644 --- a/lib_microblaze/time.c +++ b/lib_microblaze/time.c @@ -27,14 +27,14 @@ #include <common.h> #ifdef CONFIG_SYS_TIMER_0 -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { int i; i = get_timer (0); while ((get_timer (0) - i) < (usec / 1000)) ; } #else -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { unsigned int i; for (i = 0; i < (usec * CONFIG_XILINX_CLOCK_FREQ / 10000000); i++); diff --git a/lib_mips/time.c b/lib_mips/time.c index 07e356d..0e66441 100644 --- a/lib_mips/time.c +++ b/lib_mips/time.c @@ -70,7 +70,7 @@ void set_timer(ulong t) write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY); } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { unsigned int tmo; diff --git a/lib_nios/time.c b/lib_nios/time.c index 25a233e..d5096ee 100644 --- a/lib_nios/time.c +++ b/lib_nios/time.c @@ -27,13 +27,12 @@ extern void dly_clks( unsigned long ticks ); -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { /* The Nios core doesn't have a timebase, so we do our * best for now and call a low-level loop that counts * cpu clocks. */ unsigned long cnt = (CONFIG_SYS_CLK_FREQ/1000000) * usec; - WATCHDOG_RESET (); /* trigger watchdog if needed */ dly_clks (cnt); } diff --git a/lib_nios2/time.c b/lib_nios2/time.c index 25a233e..d5096ee 100644 --- a/lib_nios2/time.c +++ b/lib_nios2/time.c @@ -27,13 +27,12 @@ extern void dly_clks( unsigned long ticks ); -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { /* The Nios core doesn't have a timebase, so we do our * best for now and call a low-level loop that counts * cpu clocks. */ unsigned long cnt = (CONFIG_SYS_CLK_FREQ/1000000) * usec; - WATCHDOG_RESET (); /* trigger watchdog if needed */ dly_clks (cnt); } diff --git a/lib_ppc/time.c b/lib_ppc/time.c index 173ffab..2909961 100644 --- a/lib_ppc/time.c +++ b/lib_ppc/time.c @@ -23,10 +23,6 @@ #include <common.h> -#ifndef CONFIG_WD_PERIOD -# define CONFIG_WD_PERIOD (10 * 1000 * 1000) /* 10 seconds default*/ -#endif - /* ------------------------------------------------------------------------- */ /* @@ -54,16 +50,10 @@ unsigned long usec2ticks(unsigned long usec) * microseconds to wait) into a number of time base ticks; then we * watch the time base until it has incremented by that amount. */ -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { - ulong ticks, kv; - - do { - kv = usec > CONFIG_WD_PERIOD ? CONFIG_WD_PERIOD : usec; - ticks = usec2ticks (kv); - wait_ticks (ticks); - usec -= kv; - } while(usec); + ulong ticks = usec2ticks (usec); + wait_ticks (ticks); } /* ------------------------------------------------------------------------- */ diff --git a/lib_sh/time.c b/lib_sh/time.c index 52dbcd0..9a8f89a 100644 --- a/lib_sh/time.c +++ b/lib_sh/time.c @@ -105,7 +105,7 @@ unsigned long long get_ticks (void) return 0 - readl(TCNT0); } -void udelay (unsigned long usec) +void __udelay (unsigned long usec) { unsigned long long tmp; ulong tmo; diff --git a/lib_sh/time_sh2.c b/lib_sh/time_sh2.c index 5c6c9d4..789b46f 100644 --- a/lib_sh/time_sh2.c +++ b/lib_sh/time_sh2.c @@ -103,7 +103,7 @@ void reset_timer(void) cmt_timer_start(0); } -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { unsigned long end = get_usec() + usec; diff --git a/lib_sparc/time.c b/lib_sparc/time.c index 433f3eb..82b2a3a 100644 --- a/lib_sparc/time.c +++ b/lib_sparc/time.c @@ -53,7 +53,7 @@ unsigned long usec2ticks(unsigned long usec) * microseconds to wait) into a number of time base ticks; then we * watch the time base until it has incremented by that amount. */ -void udelay(unsigned long usec) +void __udelay(unsigned long usec) { ulong ticks = usec2ticks(usec); @@ -79,6 +79,13 @@ echo "BOARD = $4" >> config.mk [ "$6" ] && [ "$6" != "NULL" ] && echo "SOC = $6" >> config.mk +# Assign board directory to BOARDIR variable +if [ -z "$5" -o "$5" = "NULL" ] ; then + BOARDDIR=$4 +else + BOARDDIR=$5/$4 +fi + # # Create board specific header file # @@ -94,6 +101,8 @@ for i in ${TARGETS} ; do echo "#define CONFIG_MK_${i} 1" >>config.h ; done +echo "#define CONFIG_BOARDDIR board/$BOARDDIR" >>config.h + echo "#include <configs/$1.h>" >>config.h echo "#include <asm/config.h>" >>config.h diff --git a/post/post.c b/post/post.c index b74e762..b29eb87 100644 --- a/post/post.c +++ b/post/post.c @@ -58,6 +58,22 @@ int post_init_f (void) return res; } +/* + * Supply a default implementation for post_hotkeys_pressed() for boards + * without hotkey support. We always return 0 here, so that the + * long-running tests won't be started. + * + * Boards with hotkey support can override this weak default function + * by defining one in their board specific code. + */ +int __post_hotkeys_pressed(void) +{ + return 0; /* No hotkeys supported */ +} +int post_hotkeys_pressed(void) + __attribute__((weak, alias("__post_hotkeys_pressed"))); + + void post_bootmode_init (void) { int bootmode = post_bootmode_get (0); @@ -25,11 +25,20 @@ _depend: $(obj).depend -$(obj).depend: $(src)Makefile $(TOPDIR)/config.mk $(SRCS) +$(obj).depend: $(src)Makefile $(TOPDIR)/config.mk $(SRCS) $(HOSTSRCS) @rm -f $@ @for f in $(SRCS); do \ g=`basename $$f | sed -e 's/\(.*\)\.\w/\1.o/'`; \ - $(CC) -M $(HOSTCFLAGS) $(CPPFLAGS) -MQ $(obj)$$g $$f >> $@ ; \ + $(CC) -M $(CPPFLAGS) -MQ $(obj)$$g $$f >> $@ ; \ done + @for f in $(HOSTSRCS); do \ + g=`basename $$f | sed -e 's/\(.*\)\.\w/\1.o/'`; \ + $(HOSTCC) -M $(HOSTCPPFLAGS) -MQ $(obj)$$g $$f >> $@ ; \ + done + +$(HOSTOBJS): $(obj)%.o: %.c + $(HOSTCC) $(HOSTCFLAGS) $(HOSTCFLAGS_$(@F)) $(HOSTCFLAGS_$(BCURDIR)) -o $@ $< -c +$(NOPEDOBJS): $(obj)%.o: %.c + $(HOSTCC) $(HOSTCFLAGS_NOPED) $(HOSTCFLAGS_$(@F)) $(HOSTCFLAGS_$(BCURDIR)) -o $@ $< -c ######################################################################### diff --git a/tools/Makefile b/tools/Makefile index b04e3f3..5b8c3c3 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -24,33 +24,6 @@ TOOLSUBDIRS = # -# Mac OS X / Darwin's C preprocessor is Apple specific. It -# generates numerous errors and warnings. We want to bypass it -# and use GNU C's cpp. To do this we pass the -traditional-cpp -# option to the compiler. Note that the -traditional-cpp flag -# DOES NOT have the same semantics as GNU C's flag, all it does -# is invoke the GNU preprocessor in stock ANSI/ISO C fashion. -# -# Apple's linker is similar, thanks to the new 2 stage linking -# multiple symbol definitions are treated as errors, hence the -# -multiply_defined suppress option to turn off this error. -# - -HOSTCFLAGS = -Wall -HOST_LDFLAGS = - -ifeq ($(HOSTOS)-$(HOSTARCH),darwin-ppc) -HOSTCFLAGS += -traditional-cpp -HOST_LDFLAGS += -multiply_defined suppress -else -HOSTCFLAGS += -pedantic -endif - -ifeq ($(HOSTOS),cygwin) -HOSTCFLAGS += -ansi -endif - -# # toolchains targeting win32 generate .exe files # ifneq (,$(findstring WIN32 ,$(shell $(HOSTCC) -E -dM -xc /dev/null))) @@ -93,16 +66,16 @@ EXT_OBJ_FILES-y += lib_generic/sha1.o # Source files located in the tools directory OBJ_FILES-$(CONFIG_LCD_LOGO) += bmp_logo.o OBJ_FILES-$(CONFIG_VIDEO_LOGO) += bmp_logo.o -OBJ_FILES-y += default_image.o -OBJ_FILES-$(CONFIG_ENV_IS_EMBEDDED) += envcrc.o -OBJ_FILES-y += fit_image.o +NOPED_OBJ_FILES-y += default_image.o +OBJ_FILES-y += envcrc.o +NOPED_OBJ_FILES-y += fit_image.o OBJ_FILES-$(CONFIG_CMD_NET) += gen_eth_addr.o OBJ_FILES-$(CONFIG_CMD_LOADS) += img2srec.o OBJ_FILES-$(CONFIG_INCA_IP) += inca-swap-bytes.o -OBJ_FILES-y += kwbimage.o -OBJ_FILES-y += mkimage.o +NOPED_OBJ_FILES-y += kwbimage.o +NOPED_OBJ_FILES-y += mkimage.o OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o -OBJ_FILES-y += os_support.o +NOPED_OBJ_FILES-y += os_support.o OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o # Don't build by default @@ -134,57 +107,52 @@ LOGO_BMP= logos/ronetix.bmp endif # now $(obj) is defined -SRCS += $(addprefix $(SRCTREE)/,$(EXT_OBJ_FILES-y:.o=.c)) -SRCS += $(addprefix $(SRCTREE)/tools/,$(OBJ_FILES-y:.o=.c)) -SRCS += $(addprefix $(SRCTREE)/libfdt/,$(LIBFDT_OBJ_FILES-y:.o=.c)) +HOSTSRCS += $(addprefix $(SRCTREE)/,$(EXT_OBJ_FILES-y:.o=.c)) +HOSTSRCS += $(addprefix $(SRCTREE)/tools/,$(OBJ_FILES-y:.o=.c)) +HOSTSRCS += $(addprefix $(SRCTREE)/libfdt/,$(LIBFDT_OBJ_FILES-y:.o=.c)) BINS := $(addprefix $(obj),$(sort $(BIN_FILES-y))) LIBFDT_OBJS := $(addprefix $(obj),$(LIBFDT_OBJ_FILES-y)) +HOSTOBJS := $(addprefix $(obj),$(OBJ_FILES-y)) +NOPEDOBJS := $(addprefix $(obj),$(NOPED_OBJ_FILES-y)) + # # Use native tools and options # Define __KERNEL_STRICT_NAMES to prevent typedef overlaps # -CPPFLAGS = -idirafter $(SRCTREE)/include \ +HOSTCPPFLAGS = -idirafter $(SRCTREE)/include \ -idirafter $(OBJTREE)/include2 \ -idirafter $(OBJTREE)/include \ -I $(SRCTREE)/libfdt \ -I $(SRCTREE)/tools \ -DTEXT_BASE=$(TEXT_BASE) -DUSE_HOSTCC \ -D__KERNEL_STRICT_NAMES -CFLAGS = $(HOSTCFLAGS) $(CPPFLAGS) -O - -# No -pedantic switch to avoid libfdt compilation warnings -FIT_CFLAGS = -Wall $(CPPFLAGS) -O -AFLAGS = -D__ASSEMBLY__ $(CPPFLAGS) -CC = $(HOSTCC) -STRIP = $(HOSTSTRIP) -MAKEDEPEND = makedepend all: $(obj).depend $(BINS) $(LOGO-y) subdirs $(obj)bin2header$(SFX): $(obj)bin2header.o - $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ - $(STRIP) $@ + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ + $(HOSTSTRIP) $@ $(obj)bmp_logo$(SFX): $(obj)bmp_logo.o - $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ - $(STRIP) $@ + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ + $(HOSTSTRIP) $@ $(obj)envcrc$(SFX): $(obj)crc32.o $(obj)env_embedded.o $(obj)envcrc.o $(obj)sha1.o - $(CC) $(CFLAGS) -o $@ $^ + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ $(obj)gen_eth_addr$(SFX): $(obj)gen_eth_addr.o - $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ - $(STRIP) $@ + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ + $(HOSTSTRIP) $@ $(obj)img2srec$(SFX): $(obj)img2srec.o - $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ - $(STRIP) $@ + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ + $(HOSTSTRIP) $@ $(obj)inca-swap-bytes$(SFX): $(obj)inca-swap-bytes.o - $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ - $(STRIP) $@ + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ + $(HOSTSTRIP) $@ $(obj)mkimage$(SFX): $(obj)crc32.o \ $(obj)default_image.o \ @@ -196,48 +164,29 @@ $(obj)mkimage$(SFX): $(obj)crc32.o \ $(obj)os_support.o \ $(obj)sha1.o \ $(LIBFDT_OBJS) - $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ - $(STRIP) $@ + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ + $(HOSTSTRIP) $@ $(obj)mpc86x_clk$(SFX): $(obj)mpc86x_clk.o - $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ - $(STRIP) $@ + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ + $(HOSTSTRIP) $@ $(obj)ncb$(SFX): $(obj)ncb.o - $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ - $(STRIP) $@ + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ + $(HOSTSTRIP) $@ $(obj)ubsha1$(SFX): $(obj)os_support.o $(obj)sha1.o $(obj)ubsha1.o - $(CC) $(CFLAGS) -o $@ $^ - -# Some files complain if compiled with -pedantic, use FIT_CFLAGS -$(obj)default_image.o: $(SRCTREE)/tools/default_image.c - $(CC) -g $(FIT_CFLAGS) -c -o $@ $< - -$(obj)fit_image.o: $(SRCTREE)/tools/fit_image.c - $(CC) -g $(FIT_CFLAGS) -c -o $@ $< - -$(obj)image.o: $(SRCTREE)/common/image.c - $(CC) -g $(FIT_CFLAGS) -c -o $@ $< - -$(obj)kwbimage.o: $(SRCTREE)/tools/kwbimage.c - $(CC) -g $(FIT_CFLAGS) -c -o $@ $< - -$(obj)mkimage.o: $(SRCTREE)/tools/mkimage.c - $(CC) -g $(FIT_CFLAGS) -c -o $@ $< - -$(obj)os_support.o: $(SRCTREE)/tools/os_support.c - $(CC) -g $(FIT_CFLAGS) -c -o $@ $< + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ # Some of the tool objects need to be accessed from outside the tools directory $(obj)%.o: $(SRCTREE)/common/%.c - $(CC) -g $(FIT_CFLAGS) -c -o $@ $< + $(HOSTCC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $< $(obj)%.o: $(SRCTREE)/lib_generic/%.c - $(CC) -g $(CFLAGS) -c -o $@ $< + $(HOSTCC) -g $(HOSTCFLAGS) -c -o $@ $< $(LIBFDT_OBJS): - $(CC) -g $(FIT_CFLAGS) -c -o $@ $< + $(HOSTCC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $< subdirs: ifeq ($(TOOLSUBDIRS),) @@ -247,8 +196,6 @@ else $(MAKE) \ HOSTOS=$(HOSTOS) \ HOSTARCH=$(HOSTARCH) \ - HOSTCFLAGS="$(HOSTCFLAGS)" \ - HOST_LDFLAGS="$(HOST_LDFLAGS)" \ -C $$dir || exit 1 ; \ done endif diff --git a/tools/easylogo/Makefile b/tools/easylogo/Makefile index 566b125..d8e28b0 100644 --- a/tools/easylogo/Makefile +++ b/tools/easylogo/Makefile @@ -1,8 +1,11 @@ -CFLAGS += -Wall +include $(TOPDIR)/config.mk -all: easylogo +all: $(obj)easylogo + +$(obj)easylogo: $(SRCTREE)/tools/easylogo/easylogo.c + $(HOSTCC) $(HOSTCFLAGS_NOPED) $(HOSTLDFLAGS) -o $@ $^ clean: - rm -f easylogo *.o + rm -f $(obj)easylogo .PHONY: all clean diff --git a/tools/gdb/Makefile b/tools/gdb/Makefile index 0a5687d..90037c7 100644 --- a/tools/gdb/Makefile +++ b/tools/gdb/Makefile @@ -30,17 +30,14 @@ BINS = gdbsend gdbcont COBJS = gdbsend.o gdbcont.o error.o remote.o serial.o -OBJS := $(addprefix $(obj),$(COBJS)) -SRCS := $(COBJS:.o=.c) +HOSTOBJS := $(addprefix $(obj),$(COBJS)) +HOSTSRCS := $(COBJS:.o=.c) BINS := $(addprefix $(obj),$(BINS)) # # Use native tools and options # -CPPFLAGS = -I$(BFD_ROOT_DIR)/include -CFLAGS = $(HOSTCFLAGS) -O $(CPPFLAGS) -CC = $(HOSTCC) -MAKEDEPEND = makedepend +HOSTCPPFLAGS = -I$(BFD_ROOT_DIR)/include HOSTOS := $(shell uname -s | sed -e 's/\([Cc][Yy][Gg][Ww][Ii][Nn]\).*/cygwin/') @@ -54,13 +51,13 @@ else # ! CYGWIN all: $(obj).depend $(BINS) $(obj)gdbsend: $(obj)gdbsend.o $(obj)error.o $(obj)remote.o $(obj)serial.o - $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ $(obj)gdbcont: $(obj)gdbcont.o $(obj)error.o $(obj)remote.o $(obj)serial.o - $(CC) $(CFLAGS) $(HOST_LDFLAGS) -o $@ $^ + $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ clean: - rm -f $(OBJS) + rm -f $(HOSTOBJS) distclean: clean rm -f $(BINS) $(obj)core $(obj)*.bak $(obj).depend diff --git a/tools/imls/Makefile b/tools/imls/Makefile index 59b928c..9b2afb0 100644 --- a/tools/imls/Makefile +++ b/tools/imls/Makefile @@ -19,8 +19,6 @@ include $(TOPDIR)/config.mk -HOSTCFLAGS = -Wall -pedantic - # Generated executable files BIN_FILES-y += imls @@ -48,50 +46,43 @@ BINS := $(addprefix $(obj),$(sort $(BIN_FILES-y))) LIBFDT_OBJS := $(addprefix $(obj),$(LIBFDT_OBJ_FILES-y)) # -# Use native tools and options +# Compile for a hosted environment on the target # Define __KERNEL_STRICT_NAMES to prevent typedef overlaps # -CPPFLAGS = -idirafter $(SRCTREE)/include \ +HOSTCPPFLAGS = -idirafter $(SRCTREE)/include \ -idirafter $(OBJTREE)/include2 \ -idirafter $(OBJTREE)/include \ -I $(SRCTREE)/libfdt \ -I $(SRCTREE)/tools \ -DUSE_HOSTCC -D__KERNEL_STRICT_NAMES -CFLAGS = $(HOSTCFLAGS) $(CPPFLAGS) -O - -# No -pedantic switch to avoid libfdt compilation warnings -FIT_CFLAGS = -Wall $(CPPFLAGS) -O - -CC = $(CROSS_COMPILER)gcc -STRIP = $(CROSS_COMPILER)strip ifeq ($(MTD_VERSION),old) -CPPFLAGS += -DMTD_OLD +HOSTCPPFLAGS += -DMTD_OLD endif all: $(BINS) $(obj)imls: $(obj)imls.o $(obj)crc32.o $(obj)image.o $(obj)md5.o \ $(obj)sha1.o $(LIBFDT_OBJS) - $(CC) $(CFLAGS) -o $@ $^ + $(CC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^ $(STRIP) $@ # Some files complain if compiled with -pedantic, use FIT_CFLAGS $(obj)image.o: $(SRCTREE)/common/image.c - $(CC) -g $(FIT_CFLAGS) -c -o $@ $< + $(CC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $< -$(obj)imls.o: imls.c - $(CC) -g $(FIT_CFLAGS) -c -o $@ $< +$(obj)imls.o: $(SRCTREE)/tools/imls/imls.c + $(CC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $< # Some of the tool objects need to be accessed from outside the tools/imls directory $(obj)%.o: $(SRCTREE)/common/%.c - $(CC) -g $(FIT_CFLAGS) -c -o $@ $< + $(CC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $< $(obj)%.o: $(SRCTREE)/lib_generic/%.c - $(CC) -g $(CFLAGS) -c -o $@ $< + $(CC) -g $(HOSTCFLAGS) -c -o $@ $< $(obj)%.o: $(SRCTREE)/libfdt/%.c - $(CC) -g $(FIT_CFLAGS) -c -o $@ $< + $(CC) -g $(HOSTCFLAGS_NOPED) -c -o $@ $< clean: rm -rf *.o imls |