diff options
53 files changed, 1533 insertions, 380 deletions
@@ -690,6 +690,125 @@ The following options need to be configured: exists, unlike the similar options in the Linux kernel. Do not set these options unless they apply! +- Tegra SoC options: + CONFIG_TEGRA_SUPPORT_NON_SECURE + + Support executing U-Boot in non-secure (NS) mode. Certain + impossible actions will be skipped if the CPU is in NS mode, + such as ARM architectural timer initialization. + +- Driver Model + Driver model is a new framework for devices in U-Boot + introduced in early 2014. U-Boot is being progressively + moved over to this. It offers a consistent device structure, + supports grouping devices into classes and has built-in + handling of platform data and device tree. + + To enable transition to driver model in a relatively + painful fashion, each subsystem can be independently + switched between the legacy/ad-hoc approach and the new + driver model using the options below. Also, many uclass + interfaces include compatibility features which may be + removed once the conversion of that subsystem is complete. + As a result, the API provided by the subsystem may in fact + not change with driver model. + + See doc/driver-model/README.txt for more information. + + CONFIG_DM + + Enable driver model. This brings in the core support, + including scanning of platform data on start-up. If + CONFIG_OF_CONTROL is enabled, the device tree will be + scanned also when available. + + CONFIG_CMD_DM + + Enable driver model test commands. These allow you to print + out the driver model tree and the uclasses. + + CONFIG_DM_DEMO + + Enable some demo devices and the 'demo' command. These are + really only useful for playing around while trying to + understand driver model in sandbox. + + CONFIG_SPL_DM + + Enable driver model in SPL. You will need to provide a + suitable malloc() implementation. If you are not using the + full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START, + consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you + must provide CONFIG_SYS_MALLOC_F_LEN to set the size. + In most cases driver model will only allocate a few uclasses + and devices in SPL, so 1KB should be enable. See + CONFIG_SYS_MALLOC_F_LEN for more details on how to enable + it. + + CONFIG_DM_SERIAL + + Enable driver model for serial. This replaces + drivers/serial/serial.c with the serial uclass, which + implements serial_putc() etc. The uclass interface is + defined in include/serial.h. + + CONFIG_DM_GPIO + + Enable driver model for GPIO access. The standard GPIO + interface (gpio_get_value(), etc.) is then implemented by + the GPIO uclass. Drivers provide methods to query the + particular GPIOs that they provide. The uclass interface + is defined in include/asm-generic/gpio.h. + + CONFIG_DM_SPI + + Enable driver model for SPI. The SPI slave interface + (spi_setup_slave(), spi_xfer(), etc.) is then implemented by + the SPI uclass. Drivers provide methods to access the SPI + buses that they control. The uclass interface is defined in + include/spi.h. The existing spi_slave structure is attached + as 'parent data' to every slave on each bus. Slaves + typically use driver-private data instead of extending the + spi_slave structure. + + CONFIG_DM_SPI_FLASH + + Enable driver model for SPI flash. This SPI flash interface + (spi_flash_probe(), spi_flash_write(), etc.) is then + implemented by the SPI flash uclass. There is one standard + SPI flash driver which knows how to probe most chips + supported by U-Boot. The uclass interface is defined in + include/spi_flash.h, but is currently fully compatible + with the old interface to avoid confusion and duplication + during the transition parent. SPI and SPI flash must be + enabled together (it is not possible to use driver model + for one and not the other). + + CONFIG_DM_CROS_EC + + Enable driver model for the Chrome OS EC interface. This + allows the cros_ec SPI driver to operate with CONFIG_DM_SPI + but otherwise makes few changes. Since cros_ec also supports + I2C and LPC (which don't support driver model yet), a full + conversion is not yet possible. + + + ** Code size options: The following options are enabled by + default except in SPL. Enable them explicitly to get these + features in SPL. + + CONFIG_DM_WARN + + Enable the dm_warn() function. This can use up quite a bit + of space for its strings. + + CONFIG_DM_STDIO + + Enable registering a serial device with the stdio library. + + CONFIG_DM_DEVICE_REMOVE + + Enable removing of devices. - Linux Kernel Interface: CONFIG_CLOCKS_IN_MHZ diff --git a/arch/arm/cpu/arm926ejs/orion5x/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/orion5x/u-boot-spl.lds new file mode 100644 index 0000000..6f7fca0 --- /dev/null +++ b/arch/arm/cpu/arm926ejs/orion5x/u-boot-spl.lds @@ -0,0 +1,61 @@ +/* + * (C) Copyright 2014 Albert ARIBAUD <albert.u.boot@aribaud.net> + * + * Based on: + * + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * Tom Cubie <tangliang@allwinnertech.com> + * + * Based on omap-common/u-boot-spl.lds: + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> + * + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * Aneesh V <aneesh@ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +MEMORY { .nor : ORIGIN = CONFIG_SPL_TEXT_BASE,\ + LENGTH = CONFIG_SPL_MAX_SIZE } +MEMORY { .bss : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ + LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + .text : + { + __start = .; + *(.vectors) + CPUDIR/start.o (.text) + *(.text*) + } > .nor + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.nor + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.nor + + . = ALIGN(4); + .u_boot_list : { + KEEP(*(SORT(.u_boot_list*))); + } > .nor + + . = ALIGN(4); + __image_copy_end = .; + _end = .; + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } > .bss +} diff --git a/arch/arm/cpu/armv7/virt-v7.c b/arch/arm/cpu/armv7/virt-v7.c index b69fd37..4cb8806 100644 --- a/arch/arm/cpu/armv7/virt-v7.c +++ b/arch/arm/cpu/armv7/virt-v7.c @@ -112,13 +112,20 @@ int armv7_init_nonsec(void) for (i = 1; i <= itlinesnr; i++) writel((unsigned)-1, gic_dist_addr + GICD_IGROUPRn + 4 * i); + /* + * Relocate secure section before any cpu runs in secure ram. + * smp_kick_all_cpus may enable other cores and runs into secure + * ram, so need to relocate secure section before enabling other + * cores. + */ + relocate_secure_section(); + #ifndef CONFIG_ARMV7_PSCI smp_set_core_boot_addr((unsigned long)secure_ram_addr(_smp_pen), -1); smp_kick_all_cpus(); #endif /* call the non-sec switching code on this CPU also */ - relocate_secure_section(); secure_ram_addr(_nonsec_init)(); return 0; } diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S index df80a4e..b4eab0b 100644 --- a/arch/arm/cpu/armv8/start.S +++ b/arch/arm/cpu/armv8/start.S @@ -67,6 +67,9 @@ reset: msr cpacr_el1, x0 /* Enable FP/SIMD */ 0: + /* Apply ARM core specific erratas */ + bl apply_core_errata + /* * Cache/BPB/TLB Invalidate * i-cache is invalidated before enabled in icache_enable() @@ -97,6 +100,48 @@ master_cpu: /*-----------------------------------------------------------------------*/ +WEAK(apply_core_errata) + + mov x29, lr /* Save LR */ + /* For now, we support Cortex-A57 specific errata only */ + + /* Check if we are running on a Cortex-A57 core */ + branch_if_a57_core x0, apply_a57_core_errata +0: + mov lr, x29 /* Restore LR */ + ret + +apply_a57_core_errata: + +#ifdef CONFIG_ARM_ERRATA_828024 + mrs x0, S3_1_c15_c2_0 /* cpuactlr_el1 */ + /* Disable non-allocate hint of w-b-n-a memory type */ + mov x0, #0x1 << 49 + /* Disable write streaming no L1-allocate threshold */ + mov x0, #0x3 << 25 + /* Disable write streaming no-allocate threshold */ + mov x0, #0x3 << 27 + msr S3_1_c15_c2_0, x0 /* cpuactlr_el1 */ +#endif + +#ifdef CONFIG_ARM_ERRATA_826974 + mrs x0, S3_1_c15_c2_0 /* cpuactlr_el1 */ + /* Disable speculative load execution ahead of a DMB */ + mov x0, #0x1 << 59 + msr S3_1_c15_c2_0, x0 /* cpuactlr_el1 */ +#endif + +#ifdef CONFIG_ARM_ERRATA_833069 + mrs x0, S3_1_c15_c2_0 /* cpuactlr_el1 */ + /* Disable Enable Invalidates of BTB bit */ + and x0, x0, #0xE + msr S3_1_c15_c2_0, x0 /* cpuactlr_el1 */ +#endif + b 0b +ENDPROC(apply_core_errata) + +/*-----------------------------------------------------------------------*/ + WEAK(lowlevel_init) mov x29, lr /* Save LR */ diff --git a/arch/arm/cpu/tegra210-common/pinmux.c b/arch/arm/cpu/tegra210-common/pinmux.c new file mode 100644 index 0000000..a29c76b --- /dev/null +++ b/arch/arm/cpu/tegra210-common/pinmux.c @@ -0,0 +1,195 @@ +/* + * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/pinmux.h> + +#define PIN(pin, f0, f1, f2, f3) \ + { \ + .funcs = { \ + PMUX_FUNC_##f0, \ + PMUX_FUNC_##f1, \ + PMUX_FUNC_##f2, \ + PMUX_FUNC_##f3, \ + }, \ + } + +#define PIN_RESERVED {} + +static const struct pmux_pingrp_desc tegra210_pingroups[] = { + /* pin, f0, f1, f2, f3 */ + /* Offset 0x3000 */ + PIN(SDMMC1_CLK_PM0, SDMMC1, RSVD1, RSVD2, RSVD3), + PIN(SDMMC1_CMD_PM1, SDMMC1, SPI3, RSVD2, RSVD3), + PIN(SDMMC1_DAT3_PM2, SDMMC1, SPI3, RSVD2, RSVD3), + PIN(SDMMC1_DAT2_PM3, SDMMC1, SPI3, RSVD2, RSVD3), + PIN(SDMMC1_DAT1_PM4, SDMMC1, SPI3, RSVD2, RSVD3), + PIN(SDMMC1_DAT0_PM5, SDMMC1, RSVD1, RSVD2, RSVD3), + PIN_RESERVED, + /* Offset 0x301c */ + PIN(SDMMC3_CLK_PP0, SDMMC3, RSVD1, RSVD2, RSVD3), + PIN(SDMMC3_CMD_PP1, SDMMC3, RSVD1, RSVD2, RSVD3), + PIN(SDMMC3_DAT0_PP5, SDMMC3, RSVD1, RSVD2, RSVD3), + PIN(SDMMC3_DAT1_PP4, SDMMC3, RSVD1, RSVD2, RSVD3), + PIN(SDMMC3_DAT2_PP3, SDMMC3, RSVD1, RSVD2, RSVD3), + PIN(SDMMC3_DAT3_PP2, SDMMC3, RSVD1, RSVD2, RSVD3), + PIN_RESERVED, + /* Offset 0x3038 */ + PIN(PEX_L0_RST_N_PA0, PE0, RSVD1, RSVD2, RSVD3), + PIN(PEX_L0_CLKREQ_N_PA1, PE0, RSVD1, RSVD2, RSVD3), + PIN(PEX_WAKE_N_PA2, PE, RSVD1, RSVD2, RSVD3), + PIN(PEX_L1_RST_N_PA3, PE1, RSVD1, RSVD2, RSVD3), + PIN(PEX_L1_CLKREQ_N_PA4, PE1, RSVD1, RSVD2, RSVD3), + PIN(SATA_LED_ACTIVE_PA5, SATA, RSVD1, RSVD2, RSVD3), + PIN(SPI1_MOSI_PC0, SPI1, RSVD1, RSVD2, RSVD3), + PIN(SPI1_MISO_PC1, SPI1, RSVD1, RSVD2, RSVD3), + PIN(SPI1_SCK_PC2, SPI1, RSVD1, RSVD2, RSVD3), + PIN(SPI1_CS0_PC3, SPI1, RSVD1, RSVD2, RSVD3), + PIN(SPI1_CS1_PC4, SPI1, RSVD1, RSVD2, RSVD3), + PIN(SPI2_MOSI_PB4, SPI2, DTV, RSVD2, RSVD3), + PIN(SPI2_MISO_PB5, SPI2, DTV, RSVD2, RSVD3), + PIN(SPI2_SCK_PB6, SPI2, DTV, RSVD2, RSVD3), + PIN(SPI2_CS0_PB7, SPI2, DTV, RSVD2, RSVD3), + PIN(SPI2_CS1_PDD0, SPI2, RSVD1, RSVD2, RSVD3), + PIN(SPI4_MOSI_PC7, SPI4, RSVD1, RSVD2, RSVD3), + PIN(SPI4_MISO_PD0, SPI4, RSVD1, RSVD2, RSVD3), + PIN(SPI4_SCK_PC5, SPI4, RSVD1, RSVD2, RSVD3), + PIN(SPI4_CS0_PC6, SPI4, RSVD1, RSVD2, RSVD3), + PIN(QSPI_SCK_PEE0, QSPI, RSVD1, RSVD2, RSVD3), + PIN(QSPI_CS_N_PEE1, QSPI, RSVD1, RSVD2, RSVD3), + PIN(QSPI_IO0_PEE2, QSPI, RSVD1, RSVD2, RSVD3), + PIN(QSPI_IO1_PEE3, QSPI, RSVD1, RSVD2, RSVD3), + PIN(QSPI_IO2_PEE4, QSPI, RSVD1, RSVD2, RSVD3), + PIN(QSPI_IO3_PEE5, QSPI, RSVD1, RSVD2, RSVD3), + PIN_RESERVED, + /* Offset 0x30a4 */ + PIN(DMIC1_CLK_PE0, DMIC1, I2S3, RSVD2, RSVD3), + PIN(DMIC1_DAT_PE1, DMIC1, I2S3, RSVD2, RSVD3), + PIN(DMIC2_CLK_PE2, DMIC2, I2S3, RSVD2, RSVD3), + PIN(DMIC2_DAT_PE3, DMIC2, I2S3, RSVD2, RSVD3), + PIN(DMIC3_CLK_PE4, DMIC3, I2S5A, RSVD2, RSVD3), + PIN(DMIC3_DAT_PE5, DMIC3, I2S5A, RSVD2, RSVD3), + PIN(GEN1_I2C_SCL_PJ1, I2C1, RSVD1, RSVD2, RSVD3), + PIN(GEN1_I2C_SDA_PJ0, I2C1, RSVD1, RSVD2, RSVD3), + PIN(GEN2_I2C_SCL_PJ2, I2C2, RSVD1, RSVD2, RSVD3), + PIN(GEN2_I2C_SDA_PJ3, I2C2, RSVD1, RSVD2, RSVD3), + PIN(GEN3_I2C_SCL_PF0, I2C3, RSVD1, RSVD2, RSVD3), + PIN(GEN3_I2C_SDA_PF1, I2C3, RSVD1, RSVD2, RSVD3), + PIN(CAM_I2C_SCL_PS2, I2C3, I2CVI, RSVD2, RSVD3), + PIN(CAM_I2C_SDA_PS3, I2C3, I2CVI, RSVD2, RSVD3), + PIN(PWR_I2C_SCL_PY3, I2CPMU, RSVD1, RSVD2, RSVD3), + PIN(PWR_I2C_SDA_PY4, I2CPMU, RSVD1, RSVD2, RSVD3), + PIN(UART1_TX_PU0, UARTA, RSVD1, RSVD2, RSVD3), + PIN(UART1_RX_PU1, UARTA, RSVD1, RSVD2, RSVD3), + PIN(UART1_RTS_PU2, UARTA, RSVD1, RSVD2, RSVD3), + PIN(UART1_CTS_PU3, UARTA, RSVD1, RSVD2, RSVD3), + PIN(UART2_TX_PG0, UARTB, I2S4A, SPDIF, UART), + PIN(UART2_RX_PG1, UARTB, I2S4A, SPDIF, UART), + PIN(UART2_RTS_PG2, UARTB, I2S4A, RSVD2, UART), + PIN(UART2_CTS_PG3, UARTB, I2S4A, RSVD2, UART), + PIN(UART3_TX_PD1, UARTC, SPI4, RSVD2, RSVD3), + PIN(UART3_RX_PD2, UARTC, SPI4, RSVD2, RSVD3), + PIN(UART3_RTS_PD3, UARTC, SPI4, RSVD2, RSVD3), + PIN(UART3_CTS_PD4, UARTC, SPI4, RSVD2, RSVD3), + PIN(UART4_TX_PI4, UARTD, UART, RSVD2, RSVD3), + PIN(UART4_RX_PI5, UARTD, UART, RSVD2, RSVD3), + PIN(UART4_RTS_PI6, UARTD, UART, RSVD2, RSVD3), + PIN(UART4_CTS_PI7, UARTD, UART, RSVD2, RSVD3), + PIN(DAP1_FS_PB0, I2S1, RSVD1, RSVD2, RSVD3), + PIN(DAP1_DIN_PB1, I2S1, RSVD1, RSVD2, RSVD3), + PIN(DAP1_DOUT_PB2, I2S1, RSVD1, RSVD2, RSVD3), + PIN(DAP1_SCLK_PB3, I2S1, RSVD1, RSVD2, RSVD3), + PIN(DAP2_FS_PAA0, I2S2, RSVD1, RSVD2, RSVD3), + PIN(DAP2_DIN_PAA2, I2S2, RSVD1, RSVD2, RSVD3), + PIN(DAP2_DOUT_PAA3, I2S2, RSVD1, RSVD2, RSVD3), + PIN(DAP2_SCLK_PAA1, I2S2, RSVD1, RSVD2, RSVD3), + PIN(DAP4_FS_PJ4, I2S4B, RSVD1, RSVD2, RSVD3), + PIN(DAP4_DIN_PJ5, I2S4B, RSVD1, RSVD2, RSVD3), + PIN(DAP4_DOUT_PJ6, I2S4B, RSVD1, RSVD2, RSVD3), + PIN(DAP4_SCLK_PJ7, I2S4B, RSVD1, RSVD2, RSVD3), + PIN(CAM1_MCLK_PS0, EXTPERIPH3, RSVD1, RSVD2, RSVD3), + PIN(CAM2_MCLK_PS1, EXTPERIPH3, RSVD1, RSVD2, RSVD3), + PIN(JTAG_RTCK, JTAG, RSVD1, RSVD2, RSVD3), + PIN(CLK_32K_IN, CLK, RSVD1, RSVD2, RSVD3), + PIN(CLK_32K_OUT_PY5, SOC, BLINK, RSVD2, RSVD3), + PIN(BATT_BCL, BCL, RSVD1, RSVD2, RSVD3), + PIN(CLK_REQ, SYS, RSVD1, RSVD2, RSVD3), + PIN(CPU_PWR_REQ, CPU, RSVD1, RSVD2, RSVD3), + PIN(PWR_INT_N, PMI, RSVD1, RSVD2, RSVD3), + PIN(SHUTDOWN, SHUTDOWN, RSVD1, RSVD2, RSVD3), + PIN(CORE_PWR_REQ, CORE, RSVD1, RSVD2, RSVD3), + PIN(AUD_MCLK_PBB0, AUD, RSVD1, RSVD2, RSVD3), + PIN(DVFS_PWM_PBB1, RSVD0, CLDVFS, SPI3, RSVD3), + PIN(DVFS_CLK_PBB2, RSVD0, CLDVFS, SPI3, RSVD3), + PIN(GPIO_X1_AUD_PBB3, RSVD0, RSVD1, SPI3, RSVD3), + PIN(GPIO_X3_AUD_PBB4, RSVD0, RSVD1, SPI3, RSVD3), + PIN(PCC7, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(HDMI_CEC_PCC0, CEC, RSVD1, RSVD2, RSVD3), + PIN(HDMI_INT_DP_HPD_PCC1, DP, RSVD1, RSVD2, RSVD3), + PIN(SPDIF_OUT_PCC2, SPDIF, RSVD1, RSVD2, RSVD3), + PIN(SPDIF_IN_PCC3, SPDIF, RSVD1, RSVD2, RSVD3), + PIN(USB_VBUS_EN0_PCC4, USB, RSVD1, RSVD2, RSVD3), + PIN(USB_VBUS_EN1_PCC5, USB, RSVD1, RSVD2, RSVD3), + PIN(DP_HPD0_PCC6, DP, RSVD1, RSVD2, RSVD3), + PIN(WIFI_EN_PH0, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(WIFI_RST_PH1, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(WIFI_WAKE_AP_PH2, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(AP_WAKE_BT_PH3, RSVD0, UARTB, SPDIF, RSVD3), + PIN(BT_RST_PH4, RSVD0, UARTB, SPDIF, RSVD3), + PIN(BT_WAKE_AP_PH5, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(AP_WAKE_NFC_PH7, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(NFC_EN_PI0, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(NFC_INT_PI1, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(GPS_EN_PI2, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(GPS_RST_PI3, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(CAM_RST_PS4, VGP1, RSVD1, RSVD2, RSVD3), + PIN(CAM_AF_EN_PS5, VIMCLK, VGP2, RSVD2, RSVD3), + PIN(CAM_FLASH_EN_PS6, VIMCLK, VGP3, RSVD2, RSVD3), + PIN(CAM1_PWDN_PS7, VGP4, RSVD1, RSVD2, RSVD3), + PIN(CAM2_PWDN_PT0, VGP5, RSVD1, RSVD2, RSVD3), + PIN(CAM1_STROBE_PT1, VGP6, RSVD1, RSVD2, RSVD3), + PIN(LCD_TE_PY2, DISPLAYA, RSVD1, RSVD2, RSVD3), + PIN(LCD_BL_PWM_PV0, DISPLAYA, PWM0, SOR0, RSVD3), + PIN(LCD_BL_EN_PV1, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(LCD_RST_PV2, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(LCD_GPIO1_PV3, DISPLAYB, RSVD1, RSVD2, RSVD3), + PIN(LCD_GPIO2_PV4, DISPLAYB, PWM1, RSVD2, SOR1), + PIN(AP_READY_PV5, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(TOUCH_RST_PV6, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(TOUCH_CLK_PV7, TOUCH, RSVD1, RSVD2, RSVD3), + PIN(MODEM_WAKE_AP_PX0, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(TOUCH_INT_PX1, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(MOTION_INT_PX2, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(ALS_PROX_INT_PX3, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(TEMP_ALERT_PX4, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(BUTTON_POWER_ON_PX5, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(BUTTON_VOL_UP_PX6, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(BUTTON_VOL_DOWN_PX7, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(BUTTON_SLIDE_SW_PY0, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(BUTTON_HOME_PY1, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(PA6, SATA, RSVD1, RSVD2, RSVD3), + PIN(PE6, RSVD0, I2S5A, PWM2, RSVD3), + PIN(PE7, RSVD0, I2S5A, PWM3, RSVD3), + PIN(PH6, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(PK0, IQC0, I2S5B, RSVD2, RSVD3), + PIN(PK1, IQC0, I2S5B, RSVD2, RSVD3), + PIN(PK2, IQC0, I2S5B, RSVD2, RSVD3), + PIN(PK3, IQC0, I2S5B, RSVD2, RSVD3), + PIN(PK4, IQC1, RSVD1, RSVD2, RSVD3), + PIN(PK5, IQC1, RSVD1, RSVD2, RSVD3), + PIN(PK6, IQC1, RSVD1, RSVD2, RSVD3), + PIN(PK7, IQC1, RSVD1, RSVD2, RSVD3), + PIN(PL0, RSVD0, RSVD1, RSVD2, RSVD3), + PIN(PL1, SOC, RSVD1, RSVD2, RSVD3), + PIN(PZ0, VIMCLK2, RSVD1, RSVD2, RSVD3), + PIN(PZ1, VIMCLK2, SDMMC1, RSVD2, RSVD3), + PIN(PZ2, SDMMC3, CCLA, RSVD2, RSVD3), + PIN(PZ3, SDMMC3, RSVD1, RSVD2, RSVD3), + PIN(PZ4, SDMMC1, RSVD1, RSVD2, RSVD3), + PIN(PZ5, SOC, RSVD1, RSVD2, RSVD3), +}; +const struct pmux_pingrp_desc *tegra_soc_pingroups = tegra210_pingroups; diff --git a/arch/arm/dts/tegra30-apalis.dts b/arch/arm/dts/tegra30-apalis.dts index 15db0f2..13ab42b 100644 --- a/arch/arm/dts/tegra30-apalis.dts +++ b/arch/arm/dts/tegra30-apalis.dts @@ -18,6 +18,10 @@ sdhci0 = "/sdhci@78000600"; sdhci1 = "/sdhci@78000400"; sdhci2 = "/sdhci@78000000"; + spi0 = "/spi@7000d400"; + spi1 = "/spi@7000dc00"; + spi2 = "/spi@7000de00"; + spi3 = "/spi@7000da00"; usb0 = "/usb@7d000000"; usb1 = "/usb@7d004000"; usb2 = "/usb@7d008000"; @@ -243,13 +247,15 @@ sdhci@78000000 { status = "okay"; bus-width = <4>; - cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_HIGH>; + /* SD1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>; }; sdhci@78000400 { status = "okay"; bus-width = <8>; - cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_HIGH>; + /* MMC1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; }; sdhci@78000600 { @@ -262,12 +268,14 @@ usb@7d000000 { status = "okay"; dr_mode = "peripheral"; + /* USBO1_EN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; }; /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ usb@7d004000 { status = "okay"; + /* USBH_EN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; phy_type = "utmi"; }; @@ -275,6 +283,7 @@ /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ usb@7d008000 { status = "okay"; + /* USBH_EN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/dts/tegra30-colibri.dts b/arch/arm/dts/tegra30-colibri.dts index 6cd1902..36533dc 100644 --- a/arch/arm/dts/tegra30-colibri.dts +++ b/arch/arm/dts/tegra30-colibri.dts @@ -64,7 +64,7 @@ sdhci@78000200 { status = "okay"; bus-width = <4>; - cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; + cd-gpios = <&gpio TEGRA_GPIO(C, 7) GPIO_ACTIVE_LOW>; /* MMCD */ }; sdhci@78000600 { @@ -83,12 +83,14 @@ usb@7d004000 { status = "okay"; phy_type = "utmi"; + /* VBUS_LAN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(DD, 2) GPIO_ACTIVE_HIGH>; }; /* EHCI instance 2: USB3_DP/N -> USBH_P/N */ usb@7d008000 { status = "okay"; + /* USBH_PEN */ nvidia,vbus-gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/include/asm/arch-orion5x/spl.h b/arch/arm/include/asm/arch-orion5x/spl.h new file mode 100644 index 0000000..23745bc --- /dev/null +++ b/arch/arm/include/asm/arch-orion5x/spl.h @@ -0,0 +1,10 @@ +/* + * (C) Copyright 2014 Albert ARIBAUD <albert.u.boot@aribaud.net> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ASM_ARCH_SPL_H_ +#define _ASM_ARCH_SPL_H_ + +#define BOOT_DEVICE_NOR 1 diff --git a/arch/arm/include/asm/arch-tegra/ap.h b/arch/arm/include/asm/arch-tegra/ap.h index 5c8be94..ca40e4e 100644 --- a/arch/arm/include/asm/arch-tegra/ap.h +++ b/arch/arm/include/asm/arch-tegra/ap.h @@ -74,3 +74,7 @@ static inline void config_vpr(void) { } #endif + +#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) +bool tegra_cpu_is_non_secure(void); +#endif diff --git a/arch/arm/include/asm/arch-tegra/pinmux.h b/arch/arm/include/asm/arch-tegra/pinmux.h index da47769..4212e57 100644 --- a/arch/arm/include/asm/arch-tegra/pinmux.h +++ b/arch/arm/include/asm/arch-tegra/pinmux.h @@ -23,39 +23,82 @@ enum pmux_tristate { PMUX_TRI_TRISTATE = 1, }; -#ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC +#ifdef TEGRA_PMX_PINS_HAVE_E_INPUT enum pmux_pin_io { PMUX_PIN_OUTPUT = 0, PMUX_PIN_INPUT = 1, PMUX_PIN_NONE, }; +#endif +#ifdef TEGRA_PMX_PINS_HAVE_LOCK enum pmux_pin_lock { PMUX_PIN_LOCK_DEFAULT = 0, PMUX_PIN_LOCK_DISABLE, PMUX_PIN_LOCK_ENABLE, }; +#endif +#ifdef TEGRA_PMX_PINS_HAVE_OD enum pmux_pin_od { PMUX_PIN_OD_DEFAULT = 0, PMUX_PIN_OD_DISABLE, PMUX_PIN_OD_ENABLE, }; +#endif +#ifdef TEGRA_PMX_PINS_HAVE_IO_RESET enum pmux_pin_ioreset { PMUX_PIN_IO_RESET_DEFAULT = 0, PMUX_PIN_IO_RESET_DISABLE, PMUX_PIN_IO_RESET_ENABLE, }; +#endif -#ifdef TEGRA_PMX_HAS_RCV_SEL +#ifdef TEGRA_PMX_PINS_HAVE_RCV_SEL enum pmux_pin_rcv_sel { PMUX_PIN_RCV_SEL_DEFAULT = 0, PMUX_PIN_RCV_SEL_NORMAL, PMUX_PIN_RCV_SEL_HIGH, }; -#endif /* TEGRA_PMX_HAS_RCV_SEL */ -#endif /* TEGRA_PMX_HAS_PIN_IO_BIT_ETC */ +#endif + +#ifdef TEGRA_PMX_PINS_HAVE_E_IO_HV +enum pmux_pin_e_io_hv { + PMUX_PIN_E_IO_HV_DEFAULT = 0, + PMUX_PIN_E_IO_HV_NORMAL, + PMUX_PIN_E_IO_HV_HIGH, +}; +#endif + +#ifdef TEGRA_PMX_GRPS_HAVE_LPMD +/* Defines a pin group cfg's low-power mode select */ +enum pmux_lpmd { + PMUX_LPMD_X8 = 0, + PMUX_LPMD_X4, + PMUX_LPMD_X2, + PMUX_LPMD_X, + PMUX_LPMD_NONE = -1, +}; +#endif + +#if defined(TEGRA_PMX_PINS_HAVE_SCHMT) || defined(TEGRA_PMX_GRPS_HAVE_SCHMT) +/* Defines whether a pin group cfg's schmidt is enabled or not */ +enum pmux_schmt { + PMUX_SCHMT_DISABLE = 0, + PMUX_SCHMT_ENABLE = 1, + PMUX_SCHMT_NONE = -1, +}; +#endif + +#if defined(TEGRA_PMX_PINS_HAVE_HSM) || defined(TEGRA_PMX_GRPS_HAVE_HSM) +/* Defines whether a pin group cfg's high-speed mode is enabled or not */ +enum pmux_hsm { + PMUX_HSM_DISABLE = 0, + PMUX_HSM_ENABLE = 1, + PMUX_HSM_NONE = -1, +}; +#endif /* * This defines the configuration for a pin, including the function assigned, @@ -68,21 +111,37 @@ struct pmux_pingrp_config { u32 func:8; /* function to assign PMUX_FUNC_... */ u32 pull:2; /* pull up/down/normal PMUX_PULL_...*/ u32 tristate:2; /* tristate or normal PMUX_TRI_... */ -#ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC +#ifdef TEGRA_PMX_PINS_HAVE_E_INPUT u32 io:2; /* input or output PMUX_PIN_... */ +#endif +#ifdef TEGRA_PMX_PINS_HAVE_LOCK u32 lock:2; /* lock enable/disable PMUX_PIN... */ +#endif +#ifdef TEGRA_PMX_PINS_HAVE_OD u32 od:2; /* open-drain or push-pull driver */ +#endif +#ifdef TEGRA_PMX_PINS_HAVE_IO_RESET u32 ioreset:2; /* input/output reset PMUX_PIN... */ -#ifdef TEGRA_PMX_HAS_RCV_SEL +#endif +#ifdef TEGRA_PMX_PINS_HAVE_RCV_SEL u32 rcv_sel:2; /* select between High and Normal */ /* VIL/VIH receivers */ #endif +#ifdef TEGRA_PMX_PINS_HAVE_E_IO_HV + u32 e_io_hv:2; /* select 3.3v tolerant receivers */ +#endif +#ifdef TEGRA_PMX_PINS_HAVE_SCHMT + u32 schmt:2; /* schmitt enable */ +#endif +#ifdef TEGRA_PMX_PINS_HAVE_HSM + u32 hsm:2; /* high-speed mode enable */ #endif }; -#if !defined(CONFIG_TEGRA20) && !defined(CONFIG_TEGRA30) -/* Set the pinmux CLAMP_INPUTS_WHEN_TRISTATED bit */ +#ifdef TEGRA_PMX_SOC_HAS_IO_CLAMPING +/* Set/clear the pinmux CLAMP_INPUTS_WHEN_TRISTATED bit */ void pinmux_set_tristate_input_clamping(void); +void pinmux_clear_tristate_input_clamping(void); #endif /* Set the mux function for a pin group */ @@ -97,7 +156,7 @@ void pinmux_tristate_enable(enum pmux_pingrp pin); /* Set a pin group to normal (non tristate) */ void pinmux_tristate_disable(enum pmux_pingrp pin); -#ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC +#ifdef TEGRA_PMX_PINS_HAVE_E_INPUT /* Set a pin group as input or output */ void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io); #endif @@ -111,7 +170,7 @@ void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io); void pinmux_config_pingrp_table(const struct pmux_pingrp_config *config, int len); -#ifdef TEGRA_PMX_HAS_DRVGRPS +#ifdef TEGRA_PMX_SOC_HAS_DRVGRPS #define PMUX_SLWF_MIN 0 #define PMUX_SLWF_MAX 3 @@ -129,29 +188,6 @@ void pinmux_config_pingrp_table(const struct pmux_pingrp_config *config, #define PMUX_DRVDN_MAX 127 #define PMUX_DRVDN_NONE -1 -/* Defines a pin group cfg's low-power mode select */ -enum pmux_lpmd { - PMUX_LPMD_X8 = 0, - PMUX_LPMD_X4, - PMUX_LPMD_X2, - PMUX_LPMD_X, - PMUX_LPMD_NONE = -1, -}; - -/* Defines whether a pin group cfg's schmidt is enabled or not */ -enum pmux_schmt { - PMUX_SCHMT_DISABLE = 0, - PMUX_SCHMT_ENABLE = 1, - PMUX_SCHMT_NONE = -1, -}; - -/* Defines whether a pin group cfg's high-speed mode is enabled or not */ -enum pmux_hsm { - PMUX_HSM_DISABLE = 0, - PMUX_HSM_ENABLE = 1, - PMUX_HSM_NONE = -1, -}; - /* * This defines the configuration for a pin group's pad control config */ @@ -161,9 +197,15 @@ struct pmux_drvgrp_config { u32 slwr:3; /* rising edge slew */ u32 drvup:8; /* pull-up drive strength */ u32 drvdn:8; /* pull-down drive strength */ +#ifdef TEGRA_PMX_GRPS_HAVE_LPMD u32 lpmd:3; /* low-power mode selection */ +#endif +#ifdef TEGRA_PMX_GRPS_HAVE_SCHMT u32 schmt:2; /* schmidt enable */ +#endif +#ifdef TEGRA_PMX_GRPS_HAVE_HSM u32 hsm:2; /* high-speed mode enable */ +#endif }; /** @@ -175,7 +217,7 @@ struct pmux_drvgrp_config { void pinmux_config_drvgrp_table(const struct pmux_drvgrp_config *config, int len); -#endif /* TEGRA_PMX_HAS_DRVGRPS */ +#endif /* TEGRA_PMX_SOC_HAS_DRVGRPS */ struct pmux_pingrp_desc { u8 funcs[4]; diff --git a/arch/arm/include/asm/arch-tegra114/pinmux.h b/arch/arm/include/asm/arch-tegra114/pinmux.h index b86562a..38d8b9c 100644 --- a/arch/arm/include/asm/arch-tegra114/pinmux.h +++ b/arch/arm/include/asm/arch-tegra114/pinmux.h @@ -313,9 +313,17 @@ enum pmux_func { PMUX_FUNC_COUNT, }; -#define TEGRA_PMX_HAS_PIN_IO_BIT_ETC -#define TEGRA_PMX_HAS_RCV_SEL -#define TEGRA_PMX_HAS_DRVGRPS +#define TEGRA_PMX_SOC_DRV_GROUP_BASE_REG 0x868 +#define TEGRA_PMX_SOC_HAS_IO_CLAMPING +#define TEGRA_PMX_SOC_HAS_DRVGRPS +#define TEGRA_PMX_GRPS_HAVE_LPMD +#define TEGRA_PMX_GRPS_HAVE_SCHMT +#define TEGRA_PMX_GRPS_HAVE_HSM +#define TEGRA_PMX_PINS_HAVE_E_INPUT +#define TEGRA_PMX_PINS_HAVE_LOCK +#define TEGRA_PMX_PINS_HAVE_OD +#define TEGRA_PMX_PINS_HAVE_IO_RESET +#define TEGRA_PMX_PINS_HAVE_RCV_SEL #include <asm/arch-tegra/pinmux.h> #endif /* _TEGRA114_PINMUX_H_ */ diff --git a/arch/arm/include/asm/arch-tegra124/pinmux.h b/arch/arm/include/asm/arch-tegra124/pinmux.h index 1884935..78bc9e6 100644 --- a/arch/arm/include/asm/arch-tegra124/pinmux.h +++ b/arch/arm/include/asm/arch-tegra124/pinmux.h @@ -335,9 +335,17 @@ enum pmux_func { PMUX_FUNC_COUNT, }; -#define TEGRA_PMX_HAS_PIN_IO_BIT_ETC -#define TEGRA_PMX_HAS_RCV_SEL -#define TEGRA_PMX_HAS_DRVGRPS +#define TEGRA_PMX_SOC_DRV_GROUP_BASE_REG 0x868 +#define TEGRA_PMX_SOC_HAS_IO_CLAMPING +#define TEGRA_PMX_SOC_HAS_DRVGRPS +#define TEGRA_PMX_GRPS_HAVE_LPMD +#define TEGRA_PMX_GRPS_HAVE_SCHMT +#define TEGRA_PMX_GRPS_HAVE_HSM +#define TEGRA_PMX_PINS_HAVE_E_INPUT +#define TEGRA_PMX_PINS_HAVE_LOCK +#define TEGRA_PMX_PINS_HAVE_OD +#define TEGRA_PMX_PINS_HAVE_IO_RESET +#define TEGRA_PMX_PINS_HAVE_RCV_SEL #include <asm/arch-tegra/pinmux.h> #endif /* _TEGRA124_PINMUX_H_ */ diff --git a/arch/arm/include/asm/arch-tegra20/pinmux.h b/arch/arm/include/asm/arch-tegra20/pinmux.h index f7bc97f..bf35d50 100644 --- a/arch/arm/include/asm/arch-tegra20/pinmux.h +++ b/arch/arm/include/asm/arch-tegra20/pinmux.h @@ -233,6 +233,7 @@ enum pmux_func { PMUX_FUNC_COUNT, }; +#define TEGRA_PMX_SOC_DRV_GROUP_BASE_REG 0x868 #include <asm/arch-tegra/pinmux.h> #endif /* _TEGRA20_PINMUX_H_ */ diff --git a/arch/arm/include/asm/arch-tegra210/pinmux.h b/arch/arm/include/asm/arch-tegra210/pinmux.h new file mode 100644 index 0000000..af3b55f --- /dev/null +++ b/arch/arm/include/asm/arch-tegra210/pinmux.h @@ -0,0 +1,416 @@ +/* + * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _TEGRA210_PINMUX_H_ +#define _TEGRA210_PINMUX_H_ + +enum pmux_pingrp { + PMUX_PINGRP_SDMMC1_CLK_PM0, + PMUX_PINGRP_SDMMC1_CMD_PM1, + PMUX_PINGRP_SDMMC1_DAT3_PM2, + PMUX_PINGRP_SDMMC1_DAT2_PM3, + PMUX_PINGRP_SDMMC1_DAT1_PM4, + PMUX_PINGRP_SDMMC1_DAT0_PM5, + PMUX_PINGRP_SDMMC3_CLK_PP0 = (0x1c / 4), + PMUX_PINGRP_SDMMC3_CMD_PP1, + PMUX_PINGRP_SDMMC3_DAT0_PP5, + PMUX_PINGRP_SDMMC3_DAT1_PP4, + PMUX_PINGRP_SDMMC3_DAT2_PP3, + PMUX_PINGRP_SDMMC3_DAT3_PP2, + PMUX_PINGRP_PEX_L0_RST_N_PA0 = (0x38 / 4), + PMUX_PINGRP_PEX_L0_CLKREQ_N_PA1, + PMUX_PINGRP_PEX_WAKE_N_PA2, + PMUX_PINGRP_PEX_L1_RST_N_PA3, + PMUX_PINGRP_PEX_L1_CLKREQ_N_PA4, + PMUX_PINGRP_SATA_LED_ACTIVE_PA5, + PMUX_PINGRP_SPI1_MOSI_PC0, + PMUX_PINGRP_SPI1_MISO_PC1, + PMUX_PINGRP_SPI1_SCK_PC2, + PMUX_PINGRP_SPI1_CS0_PC3, + PMUX_PINGRP_SPI1_CS1_PC4, + PMUX_PINGRP_SPI2_MOSI_PB4, + PMUX_PINGRP_SPI2_MISO_PB5, + PMUX_PINGRP_SPI2_SCK_PB6, + PMUX_PINGRP_SPI2_CS0_PB7, + PMUX_PINGRP_SPI2_CS1_PDD0, + PMUX_PINGRP_SPI4_MOSI_PC7, + PMUX_PINGRP_SPI4_MISO_PD0, + PMUX_PINGRP_SPI4_SCK_PC5, + PMUX_PINGRP_SPI4_CS0_PC6, + PMUX_PINGRP_QSPI_SCK_PEE0, + PMUX_PINGRP_QSPI_CS_N_PEE1, + PMUX_PINGRP_QSPI_IO0_PEE2, + PMUX_PINGRP_QSPI_IO1_PEE3, + PMUX_PINGRP_QSPI_IO2_PEE4, + PMUX_PINGRP_QSPI_IO3_PEE5, + PMUX_PINGRP_DMIC1_CLK_PE0 = (0xa4 / 4), + PMUX_PINGRP_DMIC1_DAT_PE1, + PMUX_PINGRP_DMIC2_CLK_PE2, + PMUX_PINGRP_DMIC2_DAT_PE3, + PMUX_PINGRP_DMIC3_CLK_PE4, + PMUX_PINGRP_DMIC3_DAT_PE5, + PMUX_PINGRP_GEN1_I2C_SCL_PJ1, + PMUX_PINGRP_GEN1_I2C_SDA_PJ0, + PMUX_PINGRP_GEN2_I2C_SCL_PJ2, + PMUX_PINGRP_GEN2_I2C_SDA_PJ3, + PMUX_PINGRP_GEN3_I2C_SCL_PF0, + PMUX_PINGRP_GEN3_I2C_SDA_PF1, + PMUX_PINGRP_CAM_I2C_SCL_PS2, + PMUX_PINGRP_CAM_I2C_SDA_PS3, + PMUX_PINGRP_PWR_I2C_SCL_PY3, + PMUX_PINGRP_PWR_I2C_SDA_PY4, + PMUX_PINGRP_UART1_TX_PU0, + PMUX_PINGRP_UART1_RX_PU1, + PMUX_PINGRP_UART1_RTS_PU2, + PMUX_PINGRP_UART1_CTS_PU3, + PMUX_PINGRP_UART2_TX_PG0, + PMUX_PINGRP_UART2_RX_PG1, + PMUX_PINGRP_UART2_RTS_PG2, + PMUX_PINGRP_UART2_CTS_PG3, + PMUX_PINGRP_UART3_TX_PD1, + PMUX_PINGRP_UART3_RX_PD2, + PMUX_PINGRP_UART3_RTS_PD3, + PMUX_PINGRP_UART3_CTS_PD4, + PMUX_PINGRP_UART4_TX_PI4, + PMUX_PINGRP_UART4_RX_PI5, + PMUX_PINGRP_UART4_RTS_PI6, + PMUX_PINGRP_UART4_CTS_PI7, + PMUX_PINGRP_DAP1_FS_PB0, + PMUX_PINGRP_DAP1_DIN_PB1, + PMUX_PINGRP_DAP1_DOUT_PB2, + PMUX_PINGRP_DAP1_SCLK_PB3, + PMUX_PINGRP_DAP2_FS_PAA0, + PMUX_PINGRP_DAP2_DIN_PAA2, + PMUX_PINGRP_DAP2_DOUT_PAA3, + PMUX_PINGRP_DAP2_SCLK_PAA1, + PMUX_PINGRP_DAP4_FS_PJ4, + PMUX_PINGRP_DAP4_DIN_PJ5, + PMUX_PINGRP_DAP4_DOUT_PJ6, + PMUX_PINGRP_DAP4_SCLK_PJ7, + PMUX_PINGRP_CAM1_MCLK_PS0, + PMUX_PINGRP_CAM2_MCLK_PS1, + PMUX_PINGRP_JTAG_RTCK, + PMUX_PINGRP_CLK_32K_IN, + PMUX_PINGRP_CLK_32K_OUT_PY5, + PMUX_PINGRP_BATT_BCL, + PMUX_PINGRP_CLK_REQ, + PMUX_PINGRP_CPU_PWR_REQ, + PMUX_PINGRP_PWR_INT_N, + PMUX_PINGRP_SHUTDOWN, + PMUX_PINGRP_CORE_PWR_REQ, + PMUX_PINGRP_AUD_MCLK_PBB0, + PMUX_PINGRP_DVFS_PWM_PBB1, + PMUX_PINGRP_DVFS_CLK_PBB2, + PMUX_PINGRP_GPIO_X1_AUD_PBB3, + PMUX_PINGRP_GPIO_X3_AUD_PBB4, + PMUX_PINGRP_PCC7, + PMUX_PINGRP_HDMI_CEC_PCC0, + PMUX_PINGRP_HDMI_INT_DP_HPD_PCC1, + PMUX_PINGRP_SPDIF_OUT_PCC2, + PMUX_PINGRP_SPDIF_IN_PCC3, + PMUX_PINGRP_USB_VBUS_EN0_PCC4, + PMUX_PINGRP_USB_VBUS_EN1_PCC5, + PMUX_PINGRP_DP_HPD0_PCC6, + PMUX_PINGRP_WIFI_EN_PH0, + PMUX_PINGRP_WIFI_RST_PH1, + PMUX_PINGRP_WIFI_WAKE_AP_PH2, + PMUX_PINGRP_AP_WAKE_BT_PH3, + PMUX_PINGRP_BT_RST_PH4, + PMUX_PINGRP_BT_WAKE_AP_PH5, + PMUX_PINGRP_AP_WAKE_NFC_PH7, + PMUX_PINGRP_NFC_EN_PI0, + PMUX_PINGRP_NFC_INT_PI1, + PMUX_PINGRP_GPS_EN_PI2, + PMUX_PINGRP_GPS_RST_PI3, + PMUX_PINGRP_CAM_RST_PS4, + PMUX_PINGRP_CAM_AF_EN_PS5, + PMUX_PINGRP_CAM_FLASH_EN_PS6, + PMUX_PINGRP_CAM1_PWDN_PS7, + PMUX_PINGRP_CAM2_PWDN_PT0, + PMUX_PINGRP_CAM1_STROBE_PT1, + PMUX_PINGRP_LCD_TE_PY2, + PMUX_PINGRP_LCD_BL_PWM_PV0, + PMUX_PINGRP_LCD_BL_EN_PV1, + PMUX_PINGRP_LCD_RST_PV2, + PMUX_PINGRP_LCD_GPIO1_PV3, + PMUX_PINGRP_LCD_GPIO2_PV4, + PMUX_PINGRP_AP_READY_PV5, + PMUX_PINGRP_TOUCH_RST_PV6, + PMUX_PINGRP_TOUCH_CLK_PV7, + PMUX_PINGRP_MODEM_WAKE_AP_PX0, + PMUX_PINGRP_TOUCH_INT_PX1, + PMUX_PINGRP_MOTION_INT_PX2, + PMUX_PINGRP_ALS_PROX_INT_PX3, + PMUX_PINGRP_TEMP_ALERT_PX4, + PMUX_PINGRP_BUTTON_POWER_ON_PX5, + PMUX_PINGRP_BUTTON_VOL_UP_PX6, + PMUX_PINGRP_BUTTON_VOL_DOWN_PX7, + PMUX_PINGRP_BUTTON_SLIDE_SW_PY0, + PMUX_PINGRP_BUTTON_HOME_PY1, + PMUX_PINGRP_PA6, + PMUX_PINGRP_PE6, + PMUX_PINGRP_PE7, + PMUX_PINGRP_PH6, + PMUX_PINGRP_PK0, + PMUX_PINGRP_PK1, + PMUX_PINGRP_PK2, + PMUX_PINGRP_PK3, + PMUX_PINGRP_PK4, + PMUX_PINGRP_PK5, + PMUX_PINGRP_PK6, + PMUX_PINGRP_PK7, + PMUX_PINGRP_PL0, + PMUX_PINGRP_PL1, + PMUX_PINGRP_PZ0, + PMUX_PINGRP_PZ1, + PMUX_PINGRP_PZ2, + PMUX_PINGRP_PZ3, + PMUX_PINGRP_PZ4, + PMUX_PINGRP_PZ5, + PMUX_PINGRP_COUNT, +}; + +enum pmux_drvgrp { + PMUX_DRVGRP_ALS_PROX_INT = (0x10 / 4), + PMUX_DRVGRP_AP_READY, + PMUX_DRVGRP_AP_WAKE_BT, + PMUX_DRVGRP_AP_WAKE_NFC, + PMUX_DRVGRP_AUD_MCLK, + PMUX_DRVGRP_BATT_BCL, + PMUX_DRVGRP_BT_RST, + PMUX_DRVGRP_BT_WAKE_AP, + PMUX_DRVGRP_BUTTON_HOME, + PMUX_DRVGRP_BUTTON_POWER_ON, + PMUX_DRVGRP_BUTTON_SLIDE_SW, + PMUX_DRVGRP_BUTTON_VOL_DOWN, + PMUX_DRVGRP_BUTTON_VOL_UP, + PMUX_DRVGRP_CAM1_MCLK, + PMUX_DRVGRP_CAM1_PWDN, + PMUX_DRVGRP_CAM1_STROBE, + PMUX_DRVGRP_CAM2_MCLK, + PMUX_DRVGRP_CAM2_PWDN, + PMUX_DRVGRP_CAM_AF_EN, + PMUX_DRVGRP_CAM_FLASH_EN, + PMUX_DRVGRP_CAM_I2C_SCL, + PMUX_DRVGRP_CAM_I2C_SDA, + PMUX_DRVGRP_CAM_RST, + PMUX_DRVGRP_CLK_32K_IN, + PMUX_DRVGRP_CLK_32K_OUT, + PMUX_DRVGRP_CLK_REQ, + PMUX_DRVGRP_CORE_PWR_REQ, + PMUX_DRVGRP_CPU_PWR_REQ, + PMUX_DRVGRP_DAP1_DIN, + PMUX_DRVGRP_DAP1_DOUT, + PMUX_DRVGRP_DAP1_FS, + PMUX_DRVGRP_DAP1_SCLK, + PMUX_DRVGRP_DAP2_DIN, + PMUX_DRVGRP_DAP2_DOUT, + PMUX_DRVGRP_DAP2_FS, + PMUX_DRVGRP_DAP2_SCLK, + PMUX_DRVGRP_DAP4_DIN, + PMUX_DRVGRP_DAP4_DOUT, + PMUX_DRVGRP_DAP4_FS, + PMUX_DRVGRP_DAP4_SCLK, + PMUX_DRVGRP_DMIC1_CLK, + PMUX_DRVGRP_DMIC1_DAT, + PMUX_DRVGRP_DMIC2_CLK, + PMUX_DRVGRP_DMIC2_DAT, + PMUX_DRVGRP_DMIC3_CLK, + PMUX_DRVGRP_DMIC3_DAT, + PMUX_DRVGRP_DP_HPD0, + PMUX_DRVGRP_DVFS_CLK, + PMUX_DRVGRP_DVFS_PWM, + PMUX_DRVGRP_GEN1_I2C_SCL, + PMUX_DRVGRP_GEN1_I2C_SDA, + PMUX_DRVGRP_GEN2_I2C_SCL, + PMUX_DRVGRP_GEN2_I2C_SDA, + PMUX_DRVGRP_GEN3_I2C_SCL, + PMUX_DRVGRP_GEN3_I2C_SDA, + PMUX_DRVGRP_PA6, + PMUX_DRVGRP_PCC7, + PMUX_DRVGRP_PE6, + PMUX_DRVGRP_PE7, + PMUX_DRVGRP_PH6, + PMUX_DRVGRP_PK0, + PMUX_DRVGRP_PK1, + PMUX_DRVGRP_PK2, + PMUX_DRVGRP_PK3, + PMUX_DRVGRP_PK4, + PMUX_DRVGRP_PK5, + PMUX_DRVGRP_PK6, + PMUX_DRVGRP_PK7, + PMUX_DRVGRP_PL0, + PMUX_DRVGRP_PL1, + PMUX_DRVGRP_PZ0, + PMUX_DRVGRP_PZ1, + PMUX_DRVGRP_PZ2, + PMUX_DRVGRP_PZ3, + PMUX_DRVGRP_PZ4, + PMUX_DRVGRP_PZ5, + PMUX_DRVGRP_GPIO_X1_AUD, + PMUX_DRVGRP_GPIO_X3_AUD, + PMUX_DRVGRP_GPS_EN, + PMUX_DRVGRP_GPS_RST, + PMUX_DRVGRP_HDMI_CEC, + PMUX_DRVGRP_HDMI_INT_DP_HPD, + PMUX_DRVGRP_JTAG_RTCK, + PMUX_DRVGRP_LCD_BL_EN, + PMUX_DRVGRP_LCD_BL_PWM, + PMUX_DRVGRP_LCD_GPIO1, + PMUX_DRVGRP_LCD_GPIO2, + PMUX_DRVGRP_LCD_RST, + PMUX_DRVGRP_LCD_TE, + PMUX_DRVGRP_MODEM_WAKE_AP, + PMUX_DRVGRP_MOTION_INT, + PMUX_DRVGRP_NFC_EN, + PMUX_DRVGRP_NFC_INT, + PMUX_DRVGRP_PEX_L0_CLKREQ_N, + PMUX_DRVGRP_PEX_L0_RST_N, + PMUX_DRVGRP_PEX_L1_CLKREQ_N, + PMUX_DRVGRP_PEX_L1_RST_N, + PMUX_DRVGRP_PEX_WAKE_N, + PMUX_DRVGRP_PWR_I2C_SCL, + PMUX_DRVGRP_PWR_I2C_SDA, + PMUX_DRVGRP_PWR_INT_N, + PMUX_DRVGRP_QSPI_SCK = (0x1bc / 4), + PMUX_DRVGRP_SATA_LED_ACTIVE, + PMUX_DRVGRP_SDMMC1, + PMUX_DRVGRP_SDMMC2, + PMUX_DRVGRP_SDMMC3 = (0x1dc / 4), + PMUX_DRVGRP_SDMMC4, + PMUX_DRVGRP_SHUTDOWN = (0x1f4 / 4), + PMUX_DRVGRP_SPDIF_IN, + PMUX_DRVGRP_SPDIF_OUT, + PMUX_DRVGRP_SPI1_CS0, + PMUX_DRVGRP_SPI1_CS1, + PMUX_DRVGRP_SPI1_MISO, + PMUX_DRVGRP_SPI1_MOSI, + PMUX_DRVGRP_SPI1_SCK, + PMUX_DRVGRP_SPI2_CS0, + PMUX_DRVGRP_SPI2_CS1, + PMUX_DRVGRP_SPI2_MISO, + PMUX_DRVGRP_SPI2_MOSI, + PMUX_DRVGRP_SPI2_SCK, + PMUX_DRVGRP_SPI4_CS0, + PMUX_DRVGRP_SPI4_MISO, + PMUX_DRVGRP_SPI4_MOSI, + PMUX_DRVGRP_SPI4_SCK, + PMUX_DRVGRP_TEMP_ALERT, + PMUX_DRVGRP_TOUCH_CLK, + PMUX_DRVGRP_TOUCH_INT, + PMUX_DRVGRP_TOUCH_RST, + PMUX_DRVGRP_UART1_CTS, + PMUX_DRVGRP_UART1_RTS, + PMUX_DRVGRP_UART1_RX, + PMUX_DRVGRP_UART1_TX, + PMUX_DRVGRP_UART2_CTS, + PMUX_DRVGRP_UART2_RTS, + PMUX_DRVGRP_UART2_RX, + PMUX_DRVGRP_UART2_TX, + PMUX_DRVGRP_UART3_CTS, + PMUX_DRVGRP_UART3_RTS, + PMUX_DRVGRP_UART3_RX, + PMUX_DRVGRP_UART3_TX, + PMUX_DRVGRP_UART4_CTS, + PMUX_DRVGRP_UART4_RTS, + PMUX_DRVGRP_UART4_RX, + PMUX_DRVGRP_UART4_TX, + PMUX_DRVGRP_USB_VBUS_EN0, + PMUX_DRVGRP_USB_VBUS_EN1, + PMUX_DRVGRP_WIFI_EN, + PMUX_DRVGRP_WIFI_RST, + PMUX_DRVGRP_WIFI_WAKE_AP, + PMUX_DRVGRP_COUNT, +}; + +enum pmux_func { + PMUX_FUNC_DEFAULT, + PMUX_FUNC_AUD, + PMUX_FUNC_BCL, + PMUX_FUNC_BLINK, + PMUX_FUNC_CCLA, + PMUX_FUNC_CEC, + PMUX_FUNC_CLDVFS, + PMUX_FUNC_CLK, + PMUX_FUNC_CORE, + PMUX_FUNC_CPU, + PMUX_FUNC_DISPLAYA, + PMUX_FUNC_DISPLAYB, + PMUX_FUNC_DMIC1, + PMUX_FUNC_DMIC2, + PMUX_FUNC_DMIC3, + PMUX_FUNC_DP, + PMUX_FUNC_DTV, + PMUX_FUNC_EXTPERIPH3, + PMUX_FUNC_I2C1, + PMUX_FUNC_I2C2, + PMUX_FUNC_I2C3, + PMUX_FUNC_I2CPMU, + PMUX_FUNC_I2CVI, + PMUX_FUNC_I2S1, + PMUX_FUNC_I2S2, + PMUX_FUNC_I2S3, + PMUX_FUNC_I2S4A, + PMUX_FUNC_I2S4B, + PMUX_FUNC_I2S5A, + PMUX_FUNC_I2S5B, + PMUX_FUNC_IQC0, + PMUX_FUNC_IQC1, + PMUX_FUNC_JTAG, + PMUX_FUNC_PE, + PMUX_FUNC_PE0, + PMUX_FUNC_PE1, + PMUX_FUNC_PMI, + PMUX_FUNC_PWM0, + PMUX_FUNC_PWM1, + PMUX_FUNC_PWM2, + PMUX_FUNC_PWM3, + PMUX_FUNC_QSPI, + PMUX_FUNC_SATA, + PMUX_FUNC_SDMMC1, + PMUX_FUNC_SDMMC3, + PMUX_FUNC_SHUTDOWN, + PMUX_FUNC_SOC, + PMUX_FUNC_SOR0, + PMUX_FUNC_SOR1, + PMUX_FUNC_SPDIF, + PMUX_FUNC_SPI1, + PMUX_FUNC_SPI2, + PMUX_FUNC_SPI3, + PMUX_FUNC_SPI4, + PMUX_FUNC_SYS, + PMUX_FUNC_TOUCH, + PMUX_FUNC_UART, + PMUX_FUNC_UARTA, + PMUX_FUNC_UARTB, + PMUX_FUNC_UARTC, + PMUX_FUNC_UARTD, + PMUX_FUNC_USB, + PMUX_FUNC_VGP1, + PMUX_FUNC_VGP2, + PMUX_FUNC_VGP3, + PMUX_FUNC_VGP4, + PMUX_FUNC_VGP5, + PMUX_FUNC_VGP6, + PMUX_FUNC_VIMCLK, + PMUX_FUNC_VIMCLK2, + PMUX_FUNC_RSVD0, + PMUX_FUNC_RSVD1, + PMUX_FUNC_RSVD2, + PMUX_FUNC_RSVD3, + PMUX_FUNC_COUNT, +}; + +#define TEGRA_PMX_SOC_DRV_GROUP_BASE_REG 0x8d4 +#define TEGRA_PMX_SOC_HAS_IO_CLAMPING +#define TEGRA_PMX_SOC_HAS_DRVGRPS +#define TEGRA_PMX_PINS_HAVE_E_INPUT +#define TEGRA_PMX_PINS_HAVE_LOCK +#define TEGRA_PMX_PINS_HAVE_OD +#define TEGRA_PMX_PINS_HAVE_E_IO_HV +#include <asm/arch-tegra/pinmux.h> + +#endif /* _TEGRA210_PINMUX_H_ */ diff --git a/arch/arm/include/asm/arch-tegra30/pinmux.h b/arch/arm/include/asm/arch-tegra30/pinmux.h index a42e009..3358bf7 100644 --- a/arch/arm/include/asm/arch-tegra30/pinmux.h +++ b/arch/arm/include/asm/arch-tegra30/pinmux.h @@ -391,8 +391,15 @@ enum pmux_func { PMUX_FUNC_COUNT, }; -#define TEGRA_PMX_HAS_PIN_IO_BIT_ETC -#define TEGRA_PMX_HAS_DRVGRPS +#define TEGRA_PMX_SOC_DRV_GROUP_BASE_REG 0x868 +#define TEGRA_PMX_SOC_HAS_DRVGRPS +#define TEGRA_PMX_GRPS_HAVE_LPMD +#define TEGRA_PMX_GRPS_HAVE_SCHMT +#define TEGRA_PMX_GRPS_HAVE_HSM +#define TEGRA_PMX_PINS_HAVE_E_INPUT +#define TEGRA_PMX_PINS_HAVE_LOCK +#define TEGRA_PMX_PINS_HAVE_OD +#define TEGRA_PMX_PINS_HAVE_IO_RESET #include <asm/arch-tegra/pinmux.h> #endif /* _TEGRA30_PINMUX_H_ */ diff --git a/arch/arm/include/asm/macro.h b/arch/arm/include/asm/macro.h index 3b3146a..3cf3307 100644 --- a/arch/arm/include/asm/macro.h +++ b/arch/arm/include/asm/macro.h @@ -74,6 +74,28 @@ lr .req x30 .endm /* + * Branch if current processor is a Cortex-A57 core. + */ +.macro branch_if_a57_core, xreg, a57_label + mrs \xreg, midr_el1 + lsr \xreg, \xreg, #4 + and \xreg, \xreg, #0x00000FFF + cmp \xreg, #0xD07 /* Cortex-A57 MPCore processor. */ + b.eq \a57_label +.endm + +/* + * Branch if current processor is a Cortex-A53 core. + */ +.macro branch_if_a53_core, xreg, a53_label + mrs \xreg, midr_el1 + lsr \xreg, \xreg, #4 + and \xreg, \xreg, #0x00000FFF + cmp \xreg, #0xD03 /* Cortex-A53 MPCore processor. */ + b.eq \a53_label +.endm + +/* * Branch if current processor is a slave, * choose processor with all zero affinity value as the master. */ diff --git a/arch/arm/lib/interrupts.c b/arch/arm/lib/interrupts.c index 4dacfd9..06f4679 100644 --- a/arch/arm/lib/interrupts.c +++ b/arch/arm/lib/interrupts.c @@ -137,10 +137,15 @@ void show_regs (struct pt_regs *regs) flags = condition_codes (regs); - printf ("pc : [<%08lx>] lr : [<%08lx>]\n" - "sp : %08lx ip : %08lx fp : %08lx\n", - instruction_pointer (regs), - regs->ARM_lr, regs->ARM_sp, regs->ARM_ip, regs->ARM_fp); + printf("pc : [<%08lx>] lr : [<%08lx>]\n", + instruction_pointer(regs), regs->ARM_lr); + if (gd->flags & GD_FLG_RELOC) { + printf("reloc pc : [<%08lx>] lr : [<%08lx>]\n", + instruction_pointer(regs) - gd->reloc_off, + regs->ARM_lr - gd->reloc_off); + } + printf("sp : %08lx ip : %08lx fp : %08lx\n", + regs->ARM_sp, regs->ARM_ip, regs->ARM_fp); printf ("r10: %08lx r9 : %08lx r8 : %08lx\n", regs->ARM_r10, regs->ARM_r9, regs->ARM_r8); printf ("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n", diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig index 5a54262..291c511 100644 --- a/arch/arm/mach-orion5x/Kconfig +++ b/arch/arm/mach-orion5x/Kconfig @@ -5,6 +5,7 @@ choice config TARGET_EDMINIV2 bool "LaCie Ethernet Disk mini V2" + select SUPPORT_SPL endchoice diff --git a/arch/arm/mach-orion5x/cpu.c b/arch/arm/mach-orion5x/cpu.c index f88db3b..2ecd385 100644 --- a/arch/arm/mach-orion5x/cpu.c +++ b/arch/arm/mach-orion5x/cpu.c @@ -234,7 +234,9 @@ int arch_cpu_init(void) /* Enable and invalidate L2 cache in write through mode */ invalidate_l2_cache(); +#ifdef CONFIG_SPL_BUILD orion5x_config_adr_windows(); +#endif return 0; } diff --git a/arch/arm/mach-orion5x/include/mach/cpu.h b/arch/arm/mach-orion5x/include/mach/cpu.h index 08a450f..092dbd6 100644 --- a/arch/arm/mach-orion5x/include/mach/cpu.h +++ b/arch/arm/mach-orion5x/include/mach/cpu.h @@ -86,7 +86,7 @@ enum orion5x_cpu_attrib { #endif #if !defined (ORION5X_ADR_PCIE_IO_REMAP_LO) -#define ORION5X_ADR_PCIE_IO_REMAP_LO 0x90000000 +#define ORION5X_ADR_PCIE_IO_REMAP_LO 0xf0000000 #endif #if !defined (ORION5X_ADR_PCIE_IO_REMAP_HI) diff --git a/arch/arm/mach-orion5x/lowlevel_init.S b/arch/arm/mach-orion5x/lowlevel_init.S index 4dacc29..51a8b3c 100644 --- a/arch/arm/mach-orion5x/lowlevel_init.S +++ b/arch/arm/mach-orion5x/lowlevel_init.S @@ -62,14 +62,16 @@ /* * Low-level init happens right after start.S has switched to SVC32, * flushed and disabled caches and disabled MMU. We're still running - * from the boot chip select, so the first thing we should do is set - * up RAM for us to relocate into. + * from the boot chip select, so the first thing SPL should do is to + * set up the RAM to copy U-Boot into. */ .globl lowlevel_init lowlevel_init: +#ifdef CONFIG_SPL_BUILD + /* Use 'r4 as the base for internal register accesses */ ldr r4, =ORION5X_REGS_PHY_BASE @@ -273,5 +275,13 @@ lowlevel_init: orr r2, r2, r6 str r2, [r3, #0x484] + /* enable for 2 GB DDR; detection should find out real amount */ + sub r6, r6, r6 + str r6, [r3, #0x500] + ldr r6, =0x7fff0001 + str r6, [r3, #0x504] + +#endif /* CONFIG_SPL_BUILD */ + /* Return to U-boot via saved link register */ mov pc, lr diff --git a/arch/arm/mach-tegra/board.c b/arch/arm/mach-tegra/board.c index b6a84a5..0ebaf19 100644 --- a/arch/arm/mach-tegra/board.c +++ b/arch/arm/mach-tegra/board.c @@ -11,6 +11,7 @@ #include <asm/arch/funcmux.h> #include <asm/arch/mc.h> #include <asm/arch/tegra.h> +#include <asm/arch-tegra/ap.h> #include <asm/arch-tegra/board.h> #include <asm/arch-tegra/pmc.h> #include <asm/arch-tegra/sys_proto.h> @@ -28,27 +29,66 @@ enum { UART_COUNT = 5, }; +#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) +#if !defined(CONFIG_TEGRA124) +#error tegra_cpu_is_non_secure has only been validated on Tegra124 +#endif +bool tegra_cpu_is_non_secure(void) +{ + /* + * This register reads 0xffffffff in non-secure mode. This register + * only implements bits 31:20, so the lower bits will always read 0 in + * secure mode. Thus, the lower bits are an indicator for secure vs. + * non-secure mode. + */ + struct mc_ctlr *mc = (struct mc_ctlr *)NV_PA_MC_BASE; + uint32_t mc_s_cfg0 = readl(&mc->mc_security_cfg0); + return (mc_s_cfg0 & 1) == 1; +} +#endif + /* Read the RAM size directly from the memory controller */ unsigned int query_sdram_size(void) { struct mc_ctlr *const mc = (struct mc_ctlr *)NV_PA_MC_BASE; - u32 size_mb; + u32 emem_cfg, size_bytes; - size_mb = readl(&mc->mc_emem_cfg); + emem_cfg = readl(&mc->mc_emem_cfg); #if defined(CONFIG_TEGRA20) - debug("mc->mc_emem_cfg (MEM_SIZE_KB) = 0x%08x\n", size_mb); - size_mb = get_ram_size((void *)PHYS_SDRAM_1, size_mb * 1024); + debug("mc->mc_emem_cfg (MEM_SIZE_KB) = 0x%08x\n", emem_cfg); + size_bytes = get_ram_size((void *)PHYS_SDRAM_1, emem_cfg * 1024); #else - debug("mc->mc_emem_cfg (MEM_SIZE_MB) = 0x%08x\n", size_mb); - size_mb = get_ram_size((void *)PHYS_SDRAM_1, size_mb * 1024 * 1024); + debug("mc->mc_emem_cfg (MEM_SIZE_MB) = 0x%08x\n", emem_cfg); + /* + * If >=4GB RAM is present, the byte RAM size won't fit into 32-bits + * and will wrap. Clip the reported size to the maximum that a 32-bit + * variable can represent (rounded to a page). + */ + if (emem_cfg >= 4096) { + size_bytes = U32_MAX & ~(0x1000 - 1); + } else { + /* RAM size EMC is programmed to. */ + size_bytes = emem_cfg * 1024 * 1024; + /* + * If all RAM fits within 32-bits, it can be accessed without + * LPAE, so go test the RAM size. Otherwise, we can't access + * all the RAM, and get_ram_size() would get confused, so + * avoid using it. There's no reason we should need this + * validation step anyway. + */ + if (emem_cfg <= (0 - PHYS_SDRAM_1) / (1024 * 1024)) + size_bytes = get_ram_size((void *)PHYS_SDRAM_1, + size_bytes); + } #endif #if defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114) /* External memory limited to 2047 MB due to IROM/HI-VEC */ - if (size_mb == SZ_2G) size_mb -= SZ_1M; + if (size_bytes == SZ_2G) + size_bytes -= SZ_1M; #endif - return size_mb; + return size_bytes; } int dram_init(void) diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index 11c7435..7c274b5 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -20,6 +20,7 @@ #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/tegra.h> +#include <asm/arch-tegra/ap.h> #include <asm/arch-tegra/clk_rst.h> #include <asm/arch-tegra/timer.h> #include <div64.h> @@ -573,7 +574,10 @@ void clock_init(void) debug("PLLX = %d\n", pll_rate[CLOCK_ID_XCPU]); /* Do any special system timer/TSC setup */ - arch_timer_init(); +#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) + if (!tegra_cpu_is_non_secure()) +#endif + arch_timer_init(); } static void set_avp_clock_source(u32 src) diff --git a/arch/arm/mach-tegra/pinmux-common.c b/arch/arm/mach-tegra/pinmux-common.c index 6e3ab0c..912f65e 100644 --- a/arch/arm/mach-tegra/pinmux-common.c +++ b/arch/arm/mach-tegra/pinmux-common.c @@ -24,31 +24,59 @@ #define pmux_pin_tristate_isvalid(tristate) \ (((tristate) >= PMUX_TRI_NORMAL) && ((tristate) <= PMUX_TRI_TRISTATE)) -#ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC +#ifdef TEGRA_PMX_PINS_HAVE_E_INPUT /* return 1 if a pin_io_is in range */ #define pmux_pin_io_isvalid(io) \ (((io) >= PMUX_PIN_OUTPUT) && ((io) <= PMUX_PIN_INPUT)) +#endif +#ifdef TEGRA_PMX_PINS_HAVE_LOCK /* return 1 if a pin_lock is in range */ #define pmux_pin_lock_isvalid(lock) \ (((lock) >= PMUX_PIN_LOCK_DISABLE) && ((lock) <= PMUX_PIN_LOCK_ENABLE)) +#endif +#ifdef TEGRA_PMX_PINS_HAVE_OD /* return 1 if a pin_od is in range */ #define pmux_pin_od_isvalid(od) \ (((od) >= PMUX_PIN_OD_DISABLE) && ((od) <= PMUX_PIN_OD_ENABLE)) +#endif +#ifdef TEGRA_PMX_PINS_HAVE_IO_RESET /* return 1 if a pin_ioreset_is in range */ #define pmux_pin_ioreset_isvalid(ioreset) \ (((ioreset) >= PMUX_PIN_IO_RESET_DISABLE) && \ ((ioreset) <= PMUX_PIN_IO_RESET_ENABLE)) +#endif -#ifdef TEGRA_PMX_HAS_RCV_SEL +#ifdef TEGRA_PMX_PINS_HAVE_RCV_SEL /* return 1 if a pin_rcv_sel_is in range */ #define pmux_pin_rcv_sel_isvalid(rcv_sel) \ (((rcv_sel) >= PMUX_PIN_RCV_SEL_NORMAL) && \ ((rcv_sel) <= PMUX_PIN_RCV_SEL_HIGH)) -#endif /* TEGRA_PMX_HAS_RCV_SEL */ -#endif /* TEGRA_PMX_HAS_PIN_IO_BIT_ETC */ +#endif + +#ifdef TEGRA_PMX_PINS_HAVE_E_IO_HV +/* return 1 if a pin_e_io_hv is in range */ +#define pmux_pin_e_io_hv_isvalid(e_io_hv) \ + (((e_io_hv) >= PMUX_PIN_E_IO_HV_NORMAL) && \ + ((e_io_hv) <= PMUX_PIN_E_IO_HV_HIGH)) +#endif + +#ifdef TEGRA_PMX_GRPS_HAVE_LPMD +#define pmux_lpmd_isvalid(lpm) \ + (((lpm) >= PMUX_LPMD_X8) && ((lpm) <= PMUX_LPMD_X)) +#endif + +#if defined(TEGRA_PMX_PINS_HAVE_SCHMT) || defined(TEGRA_PMX_GRPS_HAVE_SCHMT) +#define pmux_schmt_isvalid(schmt) \ + (((schmt) >= PMUX_SCHMT_DISABLE) && ((schmt) <= PMUX_SCHMT_ENABLE)) +#endif + +#if defined(TEGRA_PMX_PINS_HAVE_HSM) || defined(TEGRA_PMX_GRPS_HAVE_HSM) +#define pmux_hsm_isvalid(hsm) \ + (((hsm) >= PMUX_HSM_DISABLE) && ((hsm) <= PMUX_HSM_ENABLE)) +#endif #define _R(offset) (u32 *)(NV_PA_APB_MISC_BASE + (offset)) @@ -78,15 +106,34 @@ #endif /* CONFIG_TEGRA20 */ -#define DRV_REG(group) _R(0x868 + ((group) * 4)) +#define DRV_REG(group) _R(TEGRA_PMX_SOC_DRV_GROUP_BASE_REG + ((group) * 4)) +/* + * We could force arch-tegraNN/pinmux.h to define all of these. However, + * that's a lot of defines, and for now it's manageable to just put a + * special case here. It's possible this decision will change with future + * SoCs. + */ +#ifdef CONFIG_TEGRA210 +#define IO_SHIFT 6 +#define LOCK_SHIFT 7 +#ifdef TEGRA_PMX_PINS_HAVE_HSM +#define HSM_SHIFT 9 +#endif +#define E_IO_HV_SHIFT 10 +#define OD_SHIFT 11 +#ifdef TEGRA_PMX_PINS_HAVE_SCHMT +#define SCHMT_SHIFT 12 +#endif +#else #define IO_SHIFT 5 #define OD_SHIFT 6 #define LOCK_SHIFT 7 #define IO_RESET_SHIFT 8 #define RCV_SEL_SHIFT 9 +#endif -#if !defined(CONFIG_TEGRA20) && !defined(CONFIG_TEGRA30) +#ifdef TEGRA_PMX_SOC_HAS_IO_CLAMPING /* This register/field only exists on Tegra114 and later */ #define APB_MISC_PP_PINMUX_GLOBAL_0 0x40 #define CLAMP_INPUTS_WHEN_TRISTATED 1 @@ -94,11 +141,15 @@ void pinmux_set_tristate_input_clamping(void) { u32 *reg = _R(APB_MISC_PP_PINMUX_GLOBAL_0); - u32 val; - val = readl(reg); - val |= CLAMP_INPUTS_WHEN_TRISTATED; - writel(val, reg); + setbits_le32(reg, CLAMP_INPUTS_WHEN_TRISTATED); +} + +void pinmux_clear_tristate_input_clamping(void) +{ + u32 *reg = _R(APB_MISC_PP_PINMUX_GLOBAL_0); + + clrbits_le32(reg, CLAMP_INPUTS_WHEN_TRISTATED); } #endif @@ -176,7 +227,7 @@ void pinmux_tristate_disable(enum pmux_pingrp pin) pinmux_set_tristate(pin, PMUX_TRI_NORMAL); } -#ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC +#ifdef TEGRA_PMX_PINS_HAVE_E_INPUT void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io) { u32 *reg = REG(pin); @@ -196,7 +247,9 @@ void pinmux_set_io(enum pmux_pingrp pin, enum pmux_pin_io io) val &= ~(1 << IO_SHIFT); writel(val, reg); } +#endif +#ifdef TEGRA_PMX_PINS_HAVE_LOCK static void pinmux_set_lock(enum pmux_pingrp pin, enum pmux_pin_lock lock) { u32 *reg = REG(pin); @@ -221,7 +274,9 @@ static void pinmux_set_lock(enum pmux_pingrp pin, enum pmux_pin_lock lock) return; } +#endif +#ifdef TEGRA_PMX_PINS_HAVE_OD static void pinmux_set_od(enum pmux_pingrp pin, enum pmux_pin_od od) { u32 *reg = REG(pin); @@ -243,7 +298,9 @@ static void pinmux_set_od(enum pmux_pingrp pin, enum pmux_pin_od od) return; } +#endif +#ifdef TEGRA_PMX_PINS_HAVE_IO_RESET static void pinmux_set_ioreset(enum pmux_pingrp pin, enum pmux_pin_ioreset ioreset) { @@ -266,8 +323,9 @@ static void pinmux_set_ioreset(enum pmux_pingrp pin, return; } +#endif -#ifdef TEGRA_PMX_HAS_RCV_SEL +#ifdef TEGRA_PMX_PINS_HAVE_RCV_SEL static void pinmux_set_rcv_sel(enum pmux_pingrp pin, enum pmux_pin_rcv_sel rcv_sel) { @@ -290,8 +348,82 @@ static void pinmux_set_rcv_sel(enum pmux_pingrp pin, return; } -#endif /* TEGRA_PMX_HAS_RCV_SEL */ -#endif /* TEGRA_PMX_HAS_PIN_IO_BIT_ETC */ +#endif + +#ifdef TEGRA_PMX_PINS_HAVE_E_IO_HV +static void pinmux_set_e_io_hv(enum pmux_pingrp pin, + enum pmux_pin_e_io_hv e_io_hv) +{ + u32 *reg = REG(pin); + u32 val; + + if (e_io_hv == PMUX_PIN_E_IO_HV_DEFAULT) + return; + + /* Error check on pin and e_io_hv */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_pin_e_io_hv_isvalid(e_io_hv)); + + val = readl(reg); + if (e_io_hv == PMUX_PIN_E_IO_HV_HIGH) + val |= (1 << E_IO_HV_SHIFT); + else + val &= ~(1 << E_IO_HV_SHIFT); + writel(val, reg); + + return; +} +#endif + +#ifdef TEGRA_PMX_PINS_HAVE_SCHMT +static void pinmux_set_schmt(enum pmux_pingrp pin, enum pmux_schmt schmt) +{ + u32 *reg = REG(grp); + u32 val; + + /* NONE means unspecified/do not change/use POR value */ + if (schmt == PMUX_SCHMT_NONE) + return; + + /* Error check pad */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_schmt_isvalid(schmt)); + + val = readl(reg); + if (schmt == PMUX_SCHMT_ENABLE) + val |= (1 << SCHMT_SHIFT); + else + val &= ~(1 << SCHMT_SHIFT); + writel(val, reg); + + return; +} +#endif + +#ifdef TEGRA_PMX_PINS_HAVE_HSM +static void pinmux_set_hsm(enum pmux_pingrp pin, enum pmux_hsm hsm) +{ + u32 *reg = REG(grp); + u32 val; + + /* NONE means unspecified/do not change/use POR value */ + if (hsm == PMUX_HSM_NONE) + return; + + /* Error check pad */ + assert(pmux_pingrp_isvalid(pin)); + assert(pmux_hsm_isvalid(hsm)); + + val = readl(reg); + if (hsm == PMUX_HSM_ENABLE) + val |= (1 << HSM_SHIFT); + else + val &= ~(1 << HSM_SHIFT); + writel(val, reg); + + return; +} +#endif static void pinmux_config_pingrp(const struct pmux_pingrp_config *config) { @@ -300,14 +432,29 @@ static void pinmux_config_pingrp(const struct pmux_pingrp_config *config) pinmux_set_func(pin, config->func); pinmux_set_pullupdown(pin, config->pull); pinmux_set_tristate(pin, config->tristate); -#ifdef TEGRA_PMX_HAS_PIN_IO_BIT_ETC +#ifdef TEGRA_PMX_PINS_HAVE_E_INPUT pinmux_set_io(pin, config->io); +#endif +#ifdef TEGRA_PMX_PINS_HAVE_LOCK pinmux_set_lock(pin, config->lock); +#endif +#ifdef TEGRA_PMX_PINS_HAVE_OD pinmux_set_od(pin, config->od); +#endif +#ifdef TEGRA_PMX_PINS_HAVE_IO_RESET pinmux_set_ioreset(pin, config->ioreset); -#ifdef TEGRA_PMX_HAS_RCV_SEL +#endif +#ifdef TEGRA_PMX_PINS_HAVE_RCV_SEL pinmux_set_rcv_sel(pin, config->rcv_sel); #endif +#ifdef TEGRA_PMX_PINS_HAVE_E_IO_HV + pinmux_set_e_io_hv(pin, config->e_io_hv); +#endif +#ifdef TEGRA_PMX_PINS_HAVE_SCHMT + pinmux_set_schmt(pin, config->schmt); +#endif +#ifdef TEGRA_PMX_PINS_HAVE_HSM + pinmux_set_hsm(pin, config->hsm); #endif } @@ -320,7 +467,7 @@ void pinmux_config_pingrp_table(const struct pmux_pingrp_config *config, pinmux_config_pingrp(&config[i]); } -#ifdef TEGRA_PMX_HAS_DRVGRPS +#ifdef TEGRA_PMX_SOC_HAS_DRVGRPS #define pmux_drvgrp_isvalid(pd) (((pd) >= 0) && ((pd) < PMUX_DRVGRP_COUNT)) @@ -330,19 +477,31 @@ void pinmux_config_pingrp_table(const struct pmux_pingrp_config *config, #define pmux_drv_isvalid(drv) \ (((drv) >= PMUX_DRVUP_MIN) && ((drv) <= PMUX_DRVUP_MAX)) -#define pmux_lpmd_isvalid(lpm) \ - (((lpm) >= PMUX_LPMD_X8) && ((lpm) <= PMUX_LPMD_X)) - -#define pmux_schmt_isvalid(schmt) \ - (((schmt) >= PMUX_SCHMT_DISABLE) && ((schmt) <= PMUX_SCHMT_ENABLE)) - -#define pmux_hsm_isvalid(hsm) \ - (((hsm) >= PMUX_HSM_DISABLE) && ((hsm) <= PMUX_HSM_ENABLE)) - +#ifdef TEGRA_PMX_GRPS_HAVE_HSM #define HSM_SHIFT 2 +#endif +#ifdef TEGRA_PMX_GRPS_HAVE_SCHMT #define SCHMT_SHIFT 3 +#endif +#ifdef TEGRA_PMX_GRPS_HAVE_LPMD #define LPMD_SHIFT 4 #define LPMD_MASK (3 << LPMD_SHIFT) +#endif +/* + * Note that the following DRV* and SLW* defines are accurate for many drive + * groups on many SoCs. We really need a per-group data structure to solve + * this, since the fields are in different positions/sizes in different + * registers (for different groups). + * + * On Tegra30/114/124, the DRV*_SHIFT values vary. + * On Tegra30, the SLW*_SHIFT values vary. + * On Tegra30/114/124/210, the DRV*_MASK values vary, although the values + * below are wide enough to cover the widest fields, and hopefully don't + * interfere with any other fields. + * On Tegra30, the SLW*_MASK values vary, but we can't use a value that's + * wide enough to cover all cases, since that would cause the field to + * overlap with other fields in the narrower cases. + */ #define DRVDN_SHIFT 12 #define DRVDN_MASK (0x7F << DRVDN_SHIFT) #define DRVUP_SHIFT 20 @@ -436,6 +595,7 @@ static void pinmux_set_drvdn(enum pmux_drvgrp grp, int drvdn) return; } +#ifdef TEGRA_PMX_GRPS_HAVE_LPMD static void pinmux_set_lpmd(enum pmux_drvgrp grp, enum pmux_lpmd lpmd) { u32 *reg = DRV_REG(grp); @@ -456,7 +616,9 @@ static void pinmux_set_lpmd(enum pmux_drvgrp grp, enum pmux_lpmd lpmd) return; } +#endif +#ifdef TEGRA_PMX_GRPS_HAVE_SCHMT static void pinmux_set_schmt(enum pmux_drvgrp grp, enum pmux_schmt schmt) { u32 *reg = DRV_REG(grp); @@ -479,7 +641,9 @@ static void pinmux_set_schmt(enum pmux_drvgrp grp, enum pmux_schmt schmt) return; } +#endif +#ifdef TEGRA_PMX_GRPS_HAVE_HSM static void pinmux_set_hsm(enum pmux_drvgrp grp, enum pmux_hsm hsm) { u32 *reg = DRV_REG(grp); @@ -502,6 +666,7 @@ static void pinmux_set_hsm(enum pmux_drvgrp grp, enum pmux_hsm hsm) return; } +#endif static void pinmux_config_drvgrp(const struct pmux_drvgrp_config *config) { @@ -511,9 +676,15 @@ static void pinmux_config_drvgrp(const struct pmux_drvgrp_config *config) pinmux_set_drvdn_slwr(grp, config->slwr); pinmux_set_drvup(grp, config->drvup); pinmux_set_drvdn(grp, config->drvdn); +#ifdef TEGRA_PMX_GRPS_HAVE_LPMD pinmux_set_lpmd(grp, config->lpmd); +#endif +#ifdef TEGRA_PMX_GRPS_HAVE_SCHMT pinmux_set_schmt(grp, config->schmt); +#endif +#ifdef TEGRA_PMX_GRPS_HAVE_HSM pinmux_set_hsm(grp, config->hsm); +#endif } void pinmux_config_drvgrp_table(const struct pmux_drvgrp_config *config, diff --git a/board/LaCie/edminiv2/config.mk b/board/LaCie/edminiv2/config.mk deleted file mode 100644 index dfa84f0..0000000 --- a/board/LaCie/edminiv2/config.mk +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net> -# -# (C) Copyright 2009 -# Marvell Semiconductor <www.marvell.com> -# Written-by: Prafulla Wadaskar <prafulla@marvell.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# TEXT_BASE must equal the intended FLASH location of u-boot. -CONFIG_SYS_TEXT_BASE = 0xfff90000 diff --git a/board/LaCie/edminiv2/edminiv2.c b/board/LaCie/edminiv2/edminiv2.c index 80ec7fa..edf6281 100644 --- a/board/LaCie/edminiv2/edminiv2.c +++ b/board/LaCie/edminiv2/edminiv2.c @@ -12,59 +12,11 @@ #include <miiphy.h> #include <asm/arch/orion5x.h> #include "../common/common.h" +#include <spl.h> +#include <ns16550.h> DECLARE_GLOBAL_DATA_PTR; -/* - * The ED Mini V2 is equipped with a Macronix MXLV400CB FLASH - * which CFI does not properly detect, hence the LEGACY config. - */ -#if defined(CONFIG_FLASH_CFI_LEGACY) -#include <flash.h> -ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) -{ - int sectsz[] = CONFIG_SYS_FLASH_SECTSZ; - int sect; - - if (base != CONFIG_SYS_FLASH_BASE) - return 0; - - info->size = 0; - info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; - /* set each sector's start address and size based */ - for (sect = 0; sect < CONFIG_SYS_MAX_FLASH_SECT; sect++) { - info->start[sect] = base+info->size; - info->size += sectsz[sect]; - } - /* This flash must be accessed in 8-bits mode, no buffer. */ - info->flash_id = 0x01000000; - info->portwidth = FLASH_CFI_8BIT; - info->chipwidth = FLASH_CFI_BY8; - info->buffer_size = 0; - /* timings are derived from the Macronix datasheet. */ - info->erase_blk_tout = 1000; - info->write_tout = 10; - info->buffer_write_tout = 300; - /* Commands and addresses are for AMD mode 8-bit access. */ - info->vendor = CFI_CMDSET_AMD_LEGACY; - info->cmd_reset = 0xF0; - info->interface = FLASH_CFI_X8; - info->legacy_unlock = 0; - info->ext_addr = 0; - info->addr_unlock1 = 0x00000aaa; - info->addr_unlock2 = 0x00000555; - /* Manufacturer Macronix, device MX29LV400CB, CFI 1.3. */ - info->manufacturer_id = 0x22; - info->device_id = 0xBA; - info->device_id2 = 0; - info->cfi_version = 0x3133; - info->cfi_offset = 0x0000; - info->name = "MX29LV400CB"; - - return 1; -} -#endif /* CONFIG_SYS_FLASH_CFI */ - int board_init(void) { /* arch number of board */ @@ -83,3 +35,21 @@ void reset_phy(void) mv_phy_88e1116_init("egiga0", 8); } #endif /* CONFIG_RESET_PHY_R */ + +/* + * SPL serial setup and NOR boot device selection + */ + +#ifdef CONFIG_SPL_BUILD + +void spl_board_init(void) +{ + preloader_console_init(); +} + +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_NOR; +} + +#endif /* CONFIG_SPL_BUILD */ diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 80ef8fd..018dddb 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -21,6 +21,7 @@ #include <asm/arch/pwm.h> #endif #include <asm/arch/tegra.h> +#include <asm/arch-tegra/ap.h> #include <asm/arch-tegra/board.h> #include <asm/arch-tegra/clk_rst.h> #include <asm/arch-tegra/pmc.h> @@ -180,6 +181,14 @@ int board_late_init(void) /* Make sure we finish initing the LCD */ tegra_lcd_check_next_stage(gd->fdt_blob, 1); #endif +#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE) + if (tegra_cpu_is_non_secure()) { + printf("CPU is in NS mode\n"); + setenv("cpu_ns_mode", "1"); + } else { + setenv("cpu_ns_mode", ""); + } +#endif return 0; } diff --git a/board/nvidia/jetson-tk1/jetson-tk1.c b/board/nvidia/jetson-tk1/jetson-tk1.c index daa74a4..52425a8 100644 --- a/board/nvidia/jetson-tk1/jetson-tk1.c +++ b/board/nvidia/jetson-tk1/jetson-tk1.c @@ -22,7 +22,7 @@ DECLARE_GLOBAL_DATA_PTR; */ void pinmux_init(void) { - pinmux_set_tristate_input_clamping(); + pinmux_clear_tristate_input_clamping(); gpio_config_table(jetson_tk1_gpio_inits, ARRAY_SIZE(jetson_tk1_gpio_inits)); diff --git a/board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h b/board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h index de4eb35..863721b 100644 --- a/board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h +++ b/board/nvidia/jetson-tk1/pinmux-config-jetson-tk1.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2014, NVIDIA CORPORATION. All rights reserved. + * Copyright (c) 2015, NVIDIA CORPORATION. All rights reserved. * * SPDX-License-Identifier: GPL-2.0+ */ @@ -15,77 +15,47 @@ static const struct tegra_gpio_config jetson_tk1_gpio_inits[] = { /* gpio, init_val */ - GPIO_INIT(C7, IN), - GPIO_INIT(G0, OUT0), - GPIO_INIT(G1, OUT0), + GPIO_INIT(G0, IN), + GPIO_INIT(G1, IN), GPIO_INIT(G2, IN), GPIO_INIT(G3, IN), + GPIO_INIT(G4, IN), GPIO_INIT(H2, OUT0), - GPIO_INIT(H3, OUT0), GPIO_INIT(H4, IN), - GPIO_INIT(H5, OUT0), - GPIO_INIT(H6, IN), - GPIO_INIT(H7, OUT0), + GPIO_INIT(H7, IN), GPIO_INIT(I0, OUT0), - GPIO_INIT(I2, OUT0), - GPIO_INIT(I4, OUT0), - GPIO_INIT(I5, IN), + GPIO_INIT(I1, IN), GPIO_INIT(I6, IN), GPIO_INIT(J0, IN), - GPIO_INIT(J2, IN), GPIO_INIT(K1, OUT0), GPIO_INIT(K2, IN), - GPIO_INIT(K3, IN), GPIO_INIT(K4, OUT0), - GPIO_INIT(K5, OUT0), GPIO_INIT(K6, OUT0), GPIO_INIT(N7, IN), - GPIO_INIT(O0, IN), GPIO_INIT(O1, IN), - GPIO_INIT(O2, IN), - GPIO_INIT(O3, IN), GPIO_INIT(O4, IN), - GPIO_INIT(O5, IN), - GPIO_INIT(O6, OUT0), - GPIO_INIT(O7, IN), - GPIO_INIT(P0, OUT0), - GPIO_INIT(P1, OUT0), GPIO_INIT(P2, OUT0), GPIO_INIT(Q0, IN), - GPIO_INIT(Q1, IN), - GPIO_INIT(Q2, IN), + GPIO_INIT(Q3, IN), GPIO_INIT(Q5, IN), - GPIO_INIT(Q6, IN), - GPIO_INIT(Q7, IN), GPIO_INIT(R0, OUT0), - GPIO_INIT(R1, OUT0), GPIO_INIT(R2, OUT0), GPIO_INIT(R4, IN), - GPIO_INIT(R5, OUT0), GPIO_INIT(R7, IN), - GPIO_INIT(S0, IN), - GPIO_INIT(S3, OUT0), - GPIO_INIT(S4, OUT0), - GPIO_INIT(S5, IN), - GPIO_INIT(S6, OUT0), + GPIO_INIT(S7, IN), GPIO_INIT(T0, OUT0), - GPIO_INIT(T1, OUT0), - GPIO_INIT(U0, OUT0), + GPIO_INIT(T1, IN), + GPIO_INIT(U0, IN), GPIO_INIT(U1, IN), GPIO_INIT(U2, IN), - GPIO_INIT(U3, OUT0), - GPIO_INIT(U4, OUT0), + GPIO_INIT(U3, IN), + GPIO_INIT(U4, IN), GPIO_INIT(U5, IN), GPIO_INIT(U6, IN), GPIO_INIT(V0, IN), GPIO_INIT(V1, IN), - GPIO_INIT(W2, IN), - GPIO_INIT(W3, IN), - GPIO_INIT(X1, OUT0), - GPIO_INIT(X3, IN), - GPIO_INIT(X4, OUT0), - GPIO_INIT(X5, IN), - GPIO_INIT(X6, IN), + GPIO_INIT(X1, IN), + GPIO_INIT(X4, IN), GPIO_INIT(X7, OUT0), GPIO_INIT(BB3, OUT0), GPIO_INIT(BB5, OUT0), @@ -93,10 +63,7 @@ static const struct tegra_gpio_config jetson_tk1_gpio_inits[] = { GPIO_INIT(BB7, OUT0), GPIO_INIT(CC1, IN), GPIO_INIT(CC2, IN), - GPIO_INIT(CC5, OUT0), - GPIO_INIT(EE1, OUT0), - GPIO_INIT(FF1, OUT0), - GPIO_INIT(FF2, IN), + GPIO_INIT(EE2, OUT1), }; #define PINCFG(_pingrp, _mux, _pull, _tri, _io, _od, _rcv_sel) \ @@ -114,152 +81,152 @@ static const struct tegra_gpio_config jetson_tk1_gpio_inits[] = { static const struct pmux_pingrp_config jetson_tk1_pingrps[] = { /* pingrp, mux, pull, tri, e_input, od, rcv_sel */ - PINCFG(CLK_32K_OUT_PA0, SOC, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(UART3_CTS_N_PA1, UARTC, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(DAP2_FS_PA2, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(DAP2_SCLK_PA3, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(DAP2_DIN_PA4, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(DAP2_DOUT_PA5, I2S1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(SDMMC3_CLK_PA6, SDMMC3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(CLK_32K_OUT_PA0, SOC, UP, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(UART3_CTS_N_PA1, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(DAP2_FS_PA2, I2S1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(DAP2_SCLK_PA3, I2S1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(DAP2_DIN_PA4, I2S1, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(DAP2_DOUT_PA5, I2S1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(SDMMC3_CLK_PA6, SDMMC3, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), PINCFG(SDMMC3_CMD_PA7, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PB0, UARTD, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PB1, UARTD, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PB0, UARTD, UP, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(PB1, UARTD, UP, TRISTATE, INPUT, DEFAULT, DEFAULT), PINCFG(SDMMC3_DAT3_PB4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), PINCFG(SDMMC3_DAT2_PB5, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), PINCFG(SDMMC3_DAT1_PB6, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), PINCFG(SDMMC3_DAT0_PB7, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(UART3_RTS_N_PC0, UARTC, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(UART3_RTS_N_PC0, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(UART2_TXD_PC2, IRDA, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(UART2_RXD_PC3, IRDA, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(UART2_RXD_PC3, IRDA, UP, TRISTATE, INPUT, DEFAULT, DEFAULT), PINCFG(GEN1_I2C_SCL_PC4, I2C1, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), PINCFG(GEN1_I2C_SDA_PC5, I2C1, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), - PINCFG(PC7, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PG0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PG1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PG2, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PG3, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PG4, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(PC7, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(PG0, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(PG1, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(PG2, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(PG3, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(PG4, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), PINCFG(PG5, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), PINCFG(PG6, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PG7, SPI4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PG7, SPI4, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), PINCFG(PH0, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(PH1, PWM1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), PINCFG(PH2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PH3, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PH4, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PH5, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PH6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PH7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(PH3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(PH4, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(PH5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(PH6, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(PH7, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), PINCFG(PI0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PI1, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PI2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(PI1, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(PI2, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(PI3, SPI4, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PI4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PI5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PI6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PI4, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(PI5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(PI6, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), PINCFG(PI7, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PJ0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PJ2, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(UART2_CTS_N_PJ5, UARTB, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PJ0, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(PJ2, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(UART2_CTS_N_PJ5, UARTB, UP, TRISTATE, INPUT, DEFAULT, DEFAULT), PINCFG(UART2_RTS_N_PJ6, UARTB, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), PINCFG(PJ7, UARTD, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PK0, SOC, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PK0, RSVD1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(PK1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PK2, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PK3, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PK2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PK3, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(PK4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(SPDIF_OUT_PK5, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(SPDIF_OUT_PK5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(SPDIF_IN_PK6, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), PINCFG(PK7, UARTD, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(DAP1_FS_PN0, I2S0, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(DAP1_DIN_PN1, I2S0, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(DAP1_FS_PN0, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(DAP1_DIN_PN1, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(DAP1_DOUT_PN2, SATA, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(DAP1_SCLK_PN3, I2S0, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(USB_VBUS_EN0_PN4, USB, UP, NORMAL, INPUT, ENABLE, DEFAULT), - PINCFG(USB_VBUS_EN1_PN5, USB, UP, NORMAL, INPUT, ENABLE, DEFAULT), - PINCFG(HDMI_INT_PN7, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, NORMAL), - PINCFG(ULPI_DATA7_PO0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(ULPI_DATA0_PO1, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(ULPI_DATA1_PO2, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(ULPI_DATA2_PO3, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(ULPI_DATA3_PO4, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(ULPI_DATA4_PO5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(ULPI_DATA5_PO6, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(ULPI_DATA6_PO7, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(DAP3_FS_PP0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(DAP3_DIN_PP1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(DAP1_SCLK_PN3, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(USB_VBUS_EN0_PN4, USB, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(USB_VBUS_EN1_PN5, USB, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(HDMI_INT_PN7, DEFAULT, DOWN, TRISTATE, INPUT, DEFAULT, NORMAL), + PINCFG(ULPI_DATA7_PO0, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(ULPI_DATA0_PO1, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(ULPI_DATA1_PO2, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(ULPI_DATA2_PO3, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(ULPI_DATA3_PO4, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(ULPI_DATA4_PO5, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(ULPI_DATA5_PO6, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(ULPI_DATA6_PO7, ULPI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(DAP3_FS_PP0, I2S2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(DAP3_DIN_PP1, I2S2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(DAP3_DOUT_PP2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), PINCFG(DAP3_SCLK_PP3, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), - PINCFG(DAP4_FS_PP4, I2S3, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(DAP4_DIN_PP5, I2S3, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(DAP4_DOUT_PP6, I2S3, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(DAP4_SCLK_PP7, I2S3, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(KB_COL0_PQ0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(KB_COL1_PQ1, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(KB_COL2_PQ2, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(KB_COL3_PQ3, KBC, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), - PINCFG(KB_COL4_PQ4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(KB_COL5_PQ5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(KB_COL6_PQ6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(KB_COL7_PQ7, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(DAP4_FS_PP4, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(DAP4_DIN_PP5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(DAP4_DOUT_PP6, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(DAP4_SCLK_PP7, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(KB_COL0_PQ0, DEFAULT, UP, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(KB_COL1_PQ1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(KB_COL2_PQ2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(KB_COL3_PQ3, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(KB_COL4_PQ4, SDMMC3, UP, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(KB_COL5_PQ5, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(KB_COL6_PQ6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(KB_COL7_PQ7, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(KB_ROW0_PR0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW1_PR1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW1_PR1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(KB_ROW2_PR2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW3_PR3, SYS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW4_PR4, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW5_PR5, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW6_PR6, DISPLAYA_ALT, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW7_PR7, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW8_PS0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW9_PS1, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW10_PS2, RSVD2, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW11_PS3, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW12_PS4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW13_PS5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW14_PS6, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW15_PS7, SOC, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW3_PR3, KBC, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW4_PR4, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW5_PR5, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW6_PR6, DISPLAYA_ALT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW7_PR7, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW8_PS0, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW9_PS1, UARTA, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW10_PS2, UARTA, UP, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW11_PS3, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW12_PS4, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW13_PS5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW14_PS6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW15_PS7, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), PINCFG(KB_ROW16_PT0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(KB_ROW17_PT1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(KB_ROW17_PT1, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), PINCFG(GEN2_I2C_SCL_PT5, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), PINCFG(GEN2_I2C_SDA_PT6, I2C2, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), PINCFG(SDMMC4_CMD_PT7, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PU0, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PU1, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PU2, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PU3, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PU4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PU5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PU6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PV0, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PV1, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(SDMMC3_CD_N_PV2, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PU0, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PU1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PU2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PU3, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PU4, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PU5, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PU6, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PV0, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(PV1, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(SDMMC3_CD_N_PV2, SDMMC3, UP, TRISTATE, INPUT, DEFAULT, DEFAULT), PINCFG(SDMMC1_WP_N_PV3, SDMMC1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(DDC_SCL_PV4, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL), PINCFG(DDC_SDA_PV5, I2C4, NORMAL, NORMAL, INPUT, DEFAULT, NORMAL), - PINCFG(GPIO_W2_AUD_PW2, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(GPIO_W3_AUD_PW3, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(GPIO_W2_AUD_PW2, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(GPIO_W3_AUD_PW3, SPI6, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(DAP_MCLK1_PW4, EXTPERIPH1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), PINCFG(CLK2_OUT_PW5, EXTPERIPH2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(UART3_TXD_PW6, UARTC, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(UART3_RXD_PW7, UARTC, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(UART3_TXD_PW6, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(UART3_RXD_PW7, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(DVFS_PWM_PX0, CLDVFS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(GPIO_X1_AUD_PX1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(GPIO_X1_AUD_PX1, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), PINCFG(DVFS_CLK_PX2, CLDVFS, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(GPIO_X3_AUD_PX3, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(GPIO_X4_AUD_PX4, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(GPIO_X5_AUD_PX5, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(GPIO_X6_AUD_PX6, DEFAULT, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(GPIO_X3_AUD_PX3, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(GPIO_X4_AUD_PX4, DEFAULT, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(GPIO_X5_AUD_PX5, RSVD4, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(GPIO_X6_AUD_PX6, GMI, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(GPIO_X7_AUD_PX7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), PINCFG(ULPI_CLK_PY0, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(ULPI_DIR_PY1, SPI1, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(ULPI_DIR_PY1, SPI1, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), PINCFG(ULPI_NXT_PY2, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), PINCFG(ULPI_STP_PY3, SPI1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(SDMMC1_DAT3_PY4, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(SDMMC1_DAT2_PY5, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(SDMMC1_DAT1_PY6, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(SDMMC1_DAT0_PY7, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(SDMMC1_CLK_PZ0, SDMMC1, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(SDMMC1_CMD_PZ1, SDMMC1, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(SDMMC1_DAT3_PY4, SDMMC1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(SDMMC1_DAT2_PY5, SDMMC1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(SDMMC1_DAT1_PY6, SDMMC1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(SDMMC1_DAT0_PY7, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(SDMMC1_CLK_PZ0, RSVD3, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(SDMMC1_CMD_PZ1, SDMMC1, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(PWR_I2C_SCL_PZ6, I2CPWR, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), PINCFG(PWR_I2C_SDA_PZ7, I2CPWR, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), PINCFG(SDMMC4_DAT0_PAA0, SDMMC4, UP, NORMAL, INPUT, DEFAULT, DEFAULT), @@ -279,30 +246,30 @@ static const struct pmux_pingrp_config jetson_tk1_pingrps[] = { PINCFG(PBB6, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), PINCFG(PBB7, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), PINCFG(CAM_MCLK_PCC0, VI_ALT3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PCC1, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PCC2, DEFAULT, DOWN, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PCC1, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PCC2, DEFAULT, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), PINCFG(SDMMC4_CLK_PCC4, SDMMC4, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(CLK2_REQ_PCC5, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(CLK2_REQ_PCC5, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), PINCFG(PEX_L0_RST_N_PDD1, PE0, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PEX_L0_CLKREQ_N_PDD2, PE0, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(PEX_WAKE_N_PDD3, PE, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PEX_L0_CLKREQ_N_PDD2, PE0, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(PEX_WAKE_N_PDD3, PE, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), PINCFG(PEX_L1_RST_N_PDD5, PE1, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PEX_L1_CLKREQ_N_PDD6, PE1, UP, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(PEX_L1_CLKREQ_N_PDD6, PE1, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), PINCFG(CLK3_OUT_PEE0, EXTPERIPH3, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(CLK3_REQ_PEE1, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(DAP_MCLK1_REQ_PEE2, SATA, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(HDMI_CEC_PEE3, CEC, NORMAL, NORMAL, INPUT, ENABLE, DEFAULT), + PINCFG(CLK3_REQ_PEE1, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, DEFAULT), + PINCFG(DAP_MCLK1_REQ_PEE2, DEFAULT, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(HDMI_CEC_PEE3, CEC, NORMAL, NORMAL, INPUT, DISABLE, DEFAULT), PINCFG(SDMMC3_CLK_LB_OUT_PEE4, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), PINCFG(SDMMC3_CLK_LB_IN_PEE5, SDMMC3, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(DP_HPD_PFF0, DP, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(USB_VBUS_EN2_PFF1, DEFAULT, NORMAL, NORMAL, OUTPUT, DISABLE, DEFAULT), - PINCFG(PFF2, DEFAULT, UP, NORMAL, INPUT, DISABLE, DEFAULT), + PINCFG(DP_HPD_PFF0, DP, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(USB_VBUS_EN2_PFF1, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), + PINCFG(PFF2, RSVD2, DOWN, TRISTATE, OUTPUT, DISABLE, DEFAULT), PINCFG(CORE_PWR_REQ, PWRON, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(CPU_PWR_REQ, RSVD2, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), - PINCFG(PWR_INT_N, PMI, UP, NORMAL, INPUT, DEFAULT, DEFAULT), - PINCFG(RESET_OUT_N, RESET_OUT_N, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(CPU_PWR_REQ, CPU, NORMAL, NORMAL, OUTPUT, DEFAULT, DEFAULT), + PINCFG(PWR_INT_N, PMI, UP, TRISTATE, INPUT, DEFAULT, DEFAULT), + PINCFG(RESET_OUT_N, RESET_OUT_N, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), PINCFG(OWR, RSVD2, DOWN, TRISTATE, OUTPUT, DEFAULT, NORMAL), - PINCFG(CLK_32K_IN, RSVD2, NORMAL, NORMAL, INPUT, DEFAULT, DEFAULT), + PINCFG(CLK_32K_IN, CLK, NORMAL, TRISTATE, INPUT, DEFAULT, DEFAULT), PINCFG(JTAG_RTCK, RTCK, UP, NORMAL, OUTPUT, DEFAULT, DEFAULT), }; diff --git a/common/board_f.c b/common/board_f.c index fc3e7dd..731b539 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -360,6 +360,18 @@ static int setup_fdt(void) /* Get the top of usable RAM */ __weak ulong board_get_usable_ram_top(ulong total_size) { +#ifdef CONFIG_SYS_SDRAM_BASE + /* + * Detect whether we have so much RAM it goes past the end of our + * 32-bit address space. If so, clip the usable RAM so it doesn't. + */ + if (gd->ram_top < CONFIG_SYS_SDRAM_BASE) + /* + * Will wrap back to top of 32-bit space when reservations + * are made. + */ + return 0; +#endif return gd->ram_top; } diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig index 3b1a6c1..20c1c65 100644 --- a/configs/edminiv2_defconfig +++ b/configs/edminiv2_defconfig @@ -1,3 +1,4 @@ -CONFIG_ARM=y -CONFIG_ORION5X=y -CONFIG_TARGET_EDMINIV2=y +CONFIG_SPL=y ++S:CONFIG_ARM=y ++S:CONFIG_ORION5X=y ++S:CONFIG_TARGET_EDMINIV2=y diff --git a/include/configs/apalis_t30.h b/include/configs/apalis_t30.h index 61809fc..6d38853 100644 --- a/include/configs/apalis_t30.h +++ b/include/configs/apalis_t30.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2014 Marcel Ziswiler + * Copyright (c) 2014-2015 Marcel Ziswiler * * SPDX-License-Identifier: GPL-2.0+ */ @@ -22,8 +22,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_APALIS_T30 -#define CONFIG_BOARD_EARLY_INIT_F - /* I2C */ #define CONFIG_SYS_I2C_TEGRA #define CONFIG_CMD_I2C @@ -47,12 +45,8 @@ #define CONFIG_USB_STORAGE #define CONFIG_CMD_USB -/* USB networking support */ -#define CONFIG_USB_HOST_ETHER -#define CONFIG_USB_ETHER_ASIX - /* PCI host support */ -#undef CONFIG_PCI /* just define once Tegra PCIe support got merged */ +#define CONFIG_PCI #define CONFIG_PCI_TEGRA #define CONFIG_PCI_PNP #define CONFIG_CMD_PCI @@ -60,12 +54,31 @@ /* PCI networking support */ #define CONFIG_E1000 -#undef CONFIG_E1000_NO_NVM /* just define once E1000 driver got fixed */ +#define CONFIG_E1000_NO_NVM /* General networking support */ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +/* Miscellaneous commands */ +#define CONFIG_CMD_SETEXPR +#define CONFIG_FAT_WRITE + +/* Increase console I/O buffer size */ +#undef CONFIG_SYS_CBSIZE +#define CONFIG_SYS_CBSIZE 1024 + +/* Increase arguments buffer size */ +#undef CONFIG_SYS_BARGSIZE +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* Increase print buffer size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Increase maximum number of arguments */ +#undef CONFIG_SYS_MAXARGS +#define CONFIG_SYS_MAXARGS 32 + #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/beaver.h b/include/configs/beaver.h index 5df460c..58013c6 100644 --- a/include/configs/beaver.h +++ b/include/configs/beaver.h @@ -36,8 +36,6 @@ #define MACH_TYPE_BEAVER 4597 /* not yet in mach-types.h */ #define CONFIG_MACH_TYPE MACH_TYPE_BEAVER -#define CONFIG_BOARD_EARLY_INIT_F - /* I2C */ #define CONFIG_SYS_I2C_TEGRA #define CONFIG_CMD_I2C diff --git a/include/configs/cardhu.h b/include/configs/cardhu.h index 5e13b65..55de464 100644 --- a/include/configs/cardhu.h +++ b/include/configs/cardhu.h @@ -39,8 +39,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_CARDHU -#define CONFIG_BOARD_EARLY_INIT_F - /* I2C */ #define CONFIG_SYS_I2C_TEGRA #define CONFIG_CMD_I2C diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h index 2b876fe..4888c94 100644 --- a/include/configs/colibri_t20_iris.h +++ b/include/configs/colibri_t20_iris.h @@ -18,8 +18,6 @@ #define CONFIG_TEGRA_UARTA_SDIO1 #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -#define CONFIG_BOARD_EARLY_INIT_F - /* SD/MMC support */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC diff --git a/include/configs/colibri_t30.h b/include/configs/colibri_t30.h index ce6f23b..ee6fa1c 100644 --- a/include/configs/colibri_t30.h +++ b/include/configs/colibri_t30.h @@ -1,5 +1,5 @@ /* - * Copyright (c) 2013-2014 Stefan Agner + * Copyright (c) 2013-2015 Stefan Agner * * SPDX-License-Identifier: GPL-2.0+ */ @@ -11,18 +11,17 @@ #include "tegra30-common.h" +/* High-level configuration options */ #define V_PROMPT "Colibri T30 # " #define CONFIG_TEGRA_BOARD_STRING "Toradex Colibri T30" -/* Board-specific config */ +/* Board-specific serial config */ #define CONFIG_SERIAL_MULTI #define CONFIG_TEGRA_ENABLE_UARTA #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE #define CONFIG_MACH_TYPE MACH_TYPE_COLIBRI_T30 -#define CONFIG_BOARD_EARLY_INIT_F - /* I2C */ #define CONFIG_SYS_I2C_TEGRA #define CONFIG_CMD_I2C @@ -54,6 +53,25 @@ #define CONFIG_CMD_NET #define CONFIG_CMD_DHCP +/* Miscellaneous commands */ +#define CONFIG_CMD_SETEXPR +#define CONFIG_FAT_WRITE + +/* Increase console I/O buffer size */ +#undef CONFIG_SYS_CBSIZE +#define CONFIG_SYS_CBSIZE 1024 + +/* Increase arguments buffer size */ +#undef CONFIG_SYS_BARGSIZE +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +/* Increase print buffer size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) + +/* Increase maximum number of arguments */ +#undef CONFIG_SYS_MAXARGS +#define CONFIG_SYS_MAXARGS 32 + #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" diff --git a/include/configs/dalmore.h b/include/configs/dalmore.h index 0b04ee6..5f5eb3b 100644 --- a/include/configs/dalmore.h +++ b/include/configs/dalmore.h @@ -32,8 +32,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_DALMORE -#define CONFIG_BOARD_EARLY_INIT_F - /* I2C */ #define CONFIG_SYS_I2C_TEGRA #define CONFIG_CMD_I2C diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 70a698a..5ce01fb 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -12,6 +12,31 @@ #ifndef _CONFIG_EDMINIV2_H #define _CONFIG_EDMINIV2_H +/* general settings */ +#define CONFIG_SYS_GENERIC_BOARD + +/* + * SPL + */ + +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_NOR_SUPPORT +#define CONFIG_SPL_TEXT_BASE 0xffff0000 +#define CONFIG_SPL_MAX_SIZE 0x0000fff0 +#define CONFIG_SPL_STACK 0x00020000 +#define CONFIG_SPL_BSS_START_ADDR 0x00020000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x0001ffff +#define CONFIG_SYS_SPL_MALLOC_START 0x00040000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x0001ffff +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/orion5x/u-boot-spl.lds" +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_UBOOT_BASE 0xfff90000 +#define CONFIG_SYS_UBOOT_START 0x00800000 +#define CONFIG_SYS_TEXT_BASE 0x00800000 + /* * Version number information */ @@ -89,13 +114,9 @@ #define CONFIG_SYS_FLASH_CFI #define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_FLASH_CFI_LEGACY #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_SECT 11 /* max num of sects on one chip */ #define CONFIG_SYS_FLASH_BASE 0xfff80000 -#define CONFIG_SYS_FLASH_SECTSZ \ - {16384, 8192, 8192, 32768, \ - 65536, 65536, 65536, 65536, 65536, 65536, 65536} /* auto boot */ #define CONFIG_BOOTDELAY 3 /* default enable autoboot */ diff --git a/include/configs/harmony.h b/include/configs/harmony.h index ff9fbc9..ad3dcdb 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -27,9 +27,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_HARMONY -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT /* Make sure LCD init is complete */ - /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index 0a79c7c..8c016b7 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -24,8 +24,6 @@ #define CONFIG_TEGRA_ENABLE_UARTD #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -#define CONFIG_BOARD_EARLY_INIT_F - /* I2C */ #define CONFIG_SYS_I2C_TEGRA #define CONFIG_CMD_I2C diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index 17a1cde..f80efed 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -15,6 +15,10 @@ #define CONFIG_GICV3 #define CONFIG_FSL_TZPC_BP147 +/* Errata fixes */ +#define CONFIG_ARM_ERRATA_828024 +#define CONFIG_ARM_ERRATA_826974 + /* Link Definitions */ #define CONFIG_SYS_TEXT_BASE 0x30001000 diff --git a/include/configs/medcom-wide.h b/include/configs/medcom-wide.h index ac5208f..f721a4d 100644 --- a/include/configs/medcom-wide.h +++ b/include/configs/medcom-wide.h @@ -20,9 +20,6 @@ #define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT - /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC diff --git a/include/configs/nyan-big.h b/include/configs/nyan-big.h index cf331ab..5397599 100644 --- a/include/configs/nyan-big.h +++ b/include/configs/nyan-big.h @@ -21,8 +21,6 @@ #define CONFIG_TEGRA_ENABLE_UARTA #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -#define CONFIG_BOARD_EARLY_INIT_F - /* I2C */ #define CONFIG_SYS_I2C_TEGRA #define CONFIG_CMD_I2C diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 45bb470..284419f 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -30,9 +30,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_PAZ00 -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT - /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC diff --git a/include/configs/plutux.h b/include/configs/plutux.h index b663b89..6878ed7 100644 --- a/include/configs/plutux.h +++ b/include/configs/plutux.h @@ -20,9 +20,6 @@ #define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT - /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index 5f77051..4442064 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -32,9 +32,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT /* Make sure LCD init is complete */ - /* I2C */ #define CONFIG_SYS_I2C_TEGRA #define CONFIG_CMD_I2C diff --git a/include/configs/tec-ng.h b/include/configs/tec-ng.h index e37b233..cfa7fb1 100644 --- a/include/configs/tec-ng.h +++ b/include/configs/tec-ng.h @@ -19,8 +19,6 @@ #define CONFIG_TEGRA_ENABLE_UARTD #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -#define CONFIG_BOARD_EARLY_INIT_F - /* I2C */ #define CONFIG_SYS_I2C_TEGRA #define CONFIG_CMD_I2C diff --git a/include/configs/tec.h b/include/configs/tec.h index 9ea4ff4..13c24c9 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -20,9 +20,6 @@ #define CONFIG_TEGRA_ENABLE_UARTD /* UARTD: debug UART */ #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTD_BASE -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT - /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h index 1177141..2cf1f68 100644 --- a/include/configs/tegra-common.h +++ b/include/configs/tegra-common.h @@ -150,6 +150,8 @@ #define CONFIG_SPL_GPIO_SUPPORT #define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT /* Misc utility code */ #define CONFIG_BOUNCE_BUFFER diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index 59f4f67..81be8a2 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -22,8 +22,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_TRIMSLICE -#define CONFIG_BOARD_EARLY_INIT_F - /* SPI */ #define CONFIG_TEGRA20_SFLASH #define CONFIG_SPI_FLASH diff --git a/include/configs/venice2.h b/include/configs/venice2.h index 8880de8..4594002 100644 --- a/include/configs/venice2.h +++ b/include/configs/venice2.h @@ -21,8 +21,6 @@ #define CONFIG_TEGRA_ENABLE_UARTA #define CONFIG_SYS_NS16550_COM1 NV_PA_APB_UARTA_BASE -#define CONFIG_BOARD_EARLY_INIT_F - /* I2C */ #define CONFIG_SYS_I2C_TEGRA #define CONFIG_CMD_I2C diff --git a/include/configs/ventana.h b/include/configs/ventana.h index f195f8a..62bec99 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -21,9 +21,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_VENTANA -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_BOARD_LATE_INIT /* Make sure LCD init is complete */ - /* SD/MMC */ #define CONFIG_MMC #define CONFIG_GENERIC_MMC diff --git a/include/configs/whistler.h b/include/configs/whistler.h index e083cbd..94f151e 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -22,8 +22,6 @@ #define CONFIG_MACH_TYPE MACH_TYPE_WHISTLER -#define CONFIG_BOARD_EARLY_INIT_F - /* I2C */ #define CONFIG_SYS_I2C_TEGRA #define CONFIG_CMD_I2C |