diff options
27 files changed, 377 insertions, 160 deletions
diff --git a/arch/arm/cpu/arm1136/mx31/timer.c b/arch/arm/cpu/arm1136/mx31/timer.c index 36266da..86916d1 100644 --- a/arch/arm/cpu/arm1136/mx31/timer.c +++ b/arch/arm/cpu/arm1136/mx31/timer.c @@ -161,42 +161,3 @@ ulong get_tbclk(void) { return MXC_CLK32; } - -void reset_cpu(ulong addr) -{ - struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE; - wdog->wcr = WDOG_ENABLE; - while (1) - ; -} - -#ifdef CONFIG_HW_WATCHDOG -void mxc_hw_watchdog_enable(void) -{ - struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE; - u16 secs; - - /* - * The timer watchdog can be set between - * 0.5 and 128 Seconds. If not defined - * in configuration file, sets 64 Seconds - */ -#ifdef CONFIG_SYS_WD_TIMER_SECS - secs = (CONFIG_SYS_WD_TIMER_SECS << 1) & 0xFF; - if (!secs) secs = 1; -#else - secs = 64; -#endif - setbits_le16(&wdog->wcr, (secs << WDOG_WT_SHIFT) | WDOG_ENABLE - | WDOG_WDZST); -} - - -void mxc_hw_watchdog_reset(void) -{ - struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE; - - writew(0x5555, &wdog->wsr); - writew(0xAAAA, &wdog->wsr); -} -#endif diff --git a/arch/arm/cpu/arm1136/mx35/generic.c b/arch/arm/cpu/arm1136/mx35/generic.c index 98aa4d1..295a98e 100644 --- a/arch/arm/cpu/arm1136/mx35/generic.c +++ b/arch/arm/cpu/arm1136/mx35/generic.c @@ -488,12 +488,6 @@ int get_clocks(void) return 0; } -void reset_cpu(ulong addr) -{ - struct wdog_regs *wdog = (struct wdog_regs *)WDOG_BASE_ADDR; - writew(4, &wdog->wcr); -} - #define RCSR_MEM_CTL_WEIM 0 #define RCSR_MEM_CTL_NAND 1 #define RCSR_MEM_CTL_ATA 2 diff --git a/arch/arm/cpu/armv7/mx6/lowlevel_init.S b/arch/arm/cpu/armv7/mx6/lowlevel_init.S index acadef2..7b60ca7 100644 --- a/arch/arm/cpu/armv7/mx6/lowlevel_init.S +++ b/arch/arm/cpu/armv7/mx6/lowlevel_init.S @@ -20,6 +20,16 @@ #include <linux/linkage.h> +.macro init_arm_errata + /* ARM erratum ID #743622 */ + mrc p15, 0, r10, c15, c0, 1 /* read diagnostic register */ + orr r10, r10, #1 << 6 /* set bit #6 */ + /* ARM erratum ID #751472 */ + orr r10, r10, #1 << 11 /* set bit #11 */ + mcr p15, 0, r10, c15, c0, 1 /* write diagnostic register */ +.endm + ENTRY(lowlevel_init) + init_arm_errata mov pc, lr ENDPROC(lowlevel_init) diff --git a/arch/arm/imx-common/cpu.c b/arch/arm/imx-common/cpu.c index 5081908..a9b86c1 100644 --- a/arch/arm/imx-common/cpu.c +++ b/arch/arm/imx-common/cpu.c @@ -175,11 +175,6 @@ int cpu_mmc_init(bd_t *bis) } #endif -void reset_cpu(ulong addr) -{ - __raw_writew(4, WDOG1_BASE_ADDR); -} - u32 get_ahb_clk(void) { struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; diff --git a/arch/arm/include/asm/arch-mx31/clock.h b/arch/arm/include/asm/arch-mx31/clock.h index 1dbb8da..25c3f70 100644 --- a/arch/arm/include/asm/arch-mx31/clock.h +++ b/arch/arm/include/asm/arch-mx31/clock.h @@ -58,7 +58,5 @@ extern void mx31_set_gpr(enum iomux_gp_func gp, char en); void mx31_uart1_hw_init(void); void mx31_uart2_hw_init(void); void mx31_spi2_hw_init(void); -void mxc_hw_watchdog_enable(void); -void mxc_hw_watchdog_reset(void); #endif /* __ASM_ARCH_CLOCK_H */ diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index ae3658b..3f58318 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -68,17 +68,6 @@ struct cspi_regs { u32 test; }; -/* Watchdog Timer (WDOG) registers */ -#define WDOG_ENABLE (1 << 2) -#define WDOG_WT_SHIFT 8 -#define WDOG_WDZST (1 << 0) - -struct wdog_regs { - u16 wcr; /* Control */ - u16 wsr; /* Service */ - u16 wrsr; /* Reset Status */ -}; - /* IIM Control Registers */ struct iim_regs { u32 iim_stat; @@ -687,7 +676,7 @@ struct esdc_regs { #define ARM_PPMRR 0x40000015 -#define WDOG_BASE 0x53FDC000 +#define WDOG1_BASE_ADDR 0x53FDC000 /* * GPIO diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h index 18c6816..7f337be 100644 --- a/arch/arm/include/asm/arch-mx35/imx-regs.h +++ b/arch/arm/include/asm/arch-mx35/imx-regs.h @@ -80,7 +80,7 @@ #define GPIO2_BASE_ADDR 0x53FD0000 #define SDMA_BASE_ADDR 0x53FD4000 #define RTC_BASE_ADDR 0x53FD8000 -#define WDOG_BASE_ADDR 0x53FDC000 +#define WDOG1_BASE_ADDR 0x53FDC000 #define PWM_BASE_ADDR 0x53FE0000 #define RTIC_BASE_ADDR 0x53FEC000 #define IIM_BASE_ADDR 0x53FF0000 @@ -292,15 +292,6 @@ struct cspi_regs { u32 test; }; -/* Watchdog Timer (WDOG) registers */ -struct wdog_regs { - u16 wcr; /* Control */ - u16 wsr; /* Service */ - u16 wrsr; /* Reset Status */ - u16 wicr; /* Interrupt Control */ - u16 wmcr; /* Misc Control */ -}; - struct esdc_regs { u32 esdctl0; u32 esdcfg0; diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index 1d060fd..249d15a 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -218,16 +218,6 @@ */ #define WBED 1 -/* - * WEIM WCR - */ -#define BCM 1 -#define GBCD(x) (((x) & 0x3) << 1) -#define INTEN (1 << 4) -#define INTPOL (1 << 5) -#define WDOG_EN (1 << 8) -#define WDOG_LIMIT(x) (((x) & 0x3) << 9) - #define CS0_128 0 #define CS0_64M_CS1_64M 1 #define CS0_64M_CS1_32M_CS2_32M 2 diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c index a3079db..06ca17c 100644 --- a/board/davedenx/qong/qong.c +++ b/board/davedenx/qong/qong.c @@ -37,13 +37,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_HW_WATCHDOG -void hw_watchdog_reset(void) -{ - mxc_hw_watchdog_reset(); -} -#endif - int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -188,7 +181,7 @@ int board_late_init(void) pmic_reg_write(p, REG_INT_STATUS1, RTCRSTI); #ifdef CONFIG_HW_WATCHDOG - mxc_hw_watchdog_enable(); + hw_watchdog_init(); #endif return 0; diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c index bc60632..895396c 100644 --- a/board/freescale/mx31pdk/mx31pdk.c +++ b/board/freescale/mx31pdk/mx31pdk.c @@ -36,13 +36,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_HW_WATCHDOG -void hw_watchdog_reset(void) -{ - mxc_hw_watchdog_reset(); -} -#endif - int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -98,7 +91,7 @@ int board_late_init(void) pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN); pmic_reg_write(p, REG_INT_STATUS1, RTCRSTI); #ifdef CONFIG_HW_WATCHDOG - mxc_hw_watchdog_enable(); + hw_watchdog_init(); #endif return 0; } diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index d1ef431..54c16b1 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -489,8 +489,6 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - lcd_enable(); - return 0; } diff --git a/board/freescale/mx51evk/mx51evk_video.c b/board/freescale/mx51evk/mx51evk_video.c index f036cf7..7be5c9b 100644 --- a/board/freescale/mx51evk/mx51evk_video.c +++ b/board/freescale/mx51evk/mx51evk_video.c @@ -48,6 +48,22 @@ static struct fb_videomode const claa_wvga = { .vmode = FB_VMODE_NONINTERLACED }; +static struct fb_videomode const dvi = { + .name = "DVI panel", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +}; + void setup_iomux_lcd(void) { /* DI2_PIN15 */ @@ -73,9 +89,26 @@ void setup_iomux_lcd(void) gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1); } -void lcd_enable(void) +int board_video_skip(void) { - int ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565); + int ret; + char const *e = getenv("panel"); + + if (e) { + if (strcmp(e, "claa") == 0) { + ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565); + if (ret) + printf("claa cannot be configured: %d\n", ret); + return ret; + } + } + + /* + * 'panel' env variable not found or has different value than 'claa' + * Defaulting to dvi output. + */ + ret = ipuv3_fb_init(&dvi, 0, IPU_PIX_FMT_RGB24); if (ret) - printf("LCD cannot be configured: %d\n", ret); + printf("dvi cannot be configured: %d\n", ret); + return ret; } diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 60cd4f0..8f39c38 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -503,8 +503,6 @@ int board_init(void) mxc_set_sata_internal_clock(); setup_iomux_i2c(); - lcd_enable(); - return 0; } diff --git a/board/freescale/mx53loco/mx53loco_video.c b/board/freescale/mx53loco/mx53loco_video.c index 69991e8..a4d5a6a 100644 --- a/board/freescale/mx53loco/mx53loco_video.c +++ b/board/freescale/mx53loco/mx53loco_video.c @@ -46,6 +46,21 @@ static struct fb_videomode const claa_wvga = { .vmode = FB_VMODE_NONINTERLACED }; +static struct fb_videomode const seiko_wvga = { + .name = "Seiko-43WVF1G", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 29851, /* picosecond (33.5 MHz) */ + .left_margin = 89, + .right_margin = 164, + .upper_margin = 23, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 10, + .sync = 0, +}; + void setup_iomux_lcd(void) { mxc_request_iomux(MX53_PIN_DI0_DISP_CLK, IOMUX_CONFIG_ALT0); @@ -86,9 +101,26 @@ void setup_iomux_lcd(void) gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), 1); } -void lcd_enable(void) +int board_video_skip(void) { - int ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565); + int ret; + char const *e = getenv("panel"); + + if (e) { + if (strcmp(e, "seiko") == 0) { + ret = ipuv3_fb_init(&seiko_wvga, 0, IPU_PIX_FMT_RGB24); + if (ret) + printf("Seiko cannot be configured: %d\n", ret); + return ret; + } + } + + /* + * 'panel' env variable not found or has different value than 'seiko' + * Defaulting to claa lcd. + */ + ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565); if (ret) - printf("LCD cannot be configured: %d\n", ret); + printf("CLAA cannot be configured: %d\n", ret); + return ret; } diff --git a/board/hale/tt01/tt01.c b/board/hale/tt01/tt01.c index 0c2cb79..b4b8209 100644 --- a/board/hale/tt01/tt01.c +++ b/board/hale/tt01/tt01.c @@ -179,7 +179,7 @@ int board_init(void) int board_late_init(void) { #ifdef CONFIG_HW_WATCHDOG - mxc_hw_watchdog_enable(); + hw_watchdog_init(); #endif return 0; diff --git a/doc/README.watchdog b/doc/README.watchdog new file mode 100644 index 0000000..ee65008 --- /dev/null +++ b/doc/README.watchdog @@ -0,0 +1,29 @@ +Watchdog driver general info + +CONFIG_HW_WATCHDOG + This enables hw_watchdog_reset to be called during various loops, + including waiting for a character on a serial port. But it + does not also call hw_watchdog_init. Boards which want this + enabled must call this function in their board file. This split + is useful because some rom's enable the watchdog when downloading + new code, so it must be serviced, but the board would rather it + was off. And, it cannot always be turned off once on. + +CONFIG_WATCHDOG_TIMEOUT_MSECS + Can be used to change the timeout for i.mx31/35/5x/6x. + If not given, will default to maximum timeout. This would + be 128000 msec for i.mx31/35/5x/6x. + +CONFIG_AT91SAM9_WATCHDOG + Available for AT91SAM9 to service the watchdog. + +CONFIG_FTWDT010_WATCHDOG + Available for FTWDT010 to service the watchdog. + +CONFIG_FTWDT010_HW_TIMEOUT + Can be used to change the timeout for FTWDT010. + +CONFIG_IMX_WATCHDOG + Available for i.mx31/35/5x/6x to service the watchdog. This is not + automatically set because some boards (vision2) still need to define + their own hw_watchdog_reset routine. diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index bc09123..b1f4e0f 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -27,6 +27,9 @@ LIB := $(obj)libwatchdog.o COBJS-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o COBJS-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o +ifneq (,$(filter $(SOC), mx31 mx35 mx5 mx6)) +COBJS-y += imx_watchdog.o +endif COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o COBJS-$(CONFIG_S5P) += s5p_wdt.o diff --git a/drivers/watchdog/imx_watchdog.c b/drivers/watchdog/imx_watchdog.c new file mode 100644 index 0000000..50e602a --- /dev/null +++ b/drivers/watchdog/imx_watchdog.c @@ -0,0 +1,66 @@ +/* + * watchdog.c - driver for i.mx on-chip watchdog + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <asm/io.h> +#include <watchdog.h> +#include <asm/arch/imx-regs.h> + +struct watchdog_regs { + u16 wcr; /* Control */ + u16 wsr; /* Service */ + u16 wrsr; /* Reset Status */ +}; + +#define WCR_WDZST 0x01 +#define WCR_WDBG 0x02 +#define WCR_WDE 0x04 /* WDOG enable */ +#define WCR_WDT 0x08 +#define WCR_WDW 0x80 +#define SET_WCR_WT(x) (x << 8) + +#ifdef CONFIG_IMX_WATCHDOG +void hw_watchdog_reset(void) +{ + struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; + + writew(0x5555, &wdog->wsr); + writew(0xaaaa, &wdog->wsr); +} + +void hw_watchdog_init(void) +{ + struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; + u16 timeout; + + /* + * The timer watchdog can be set between + * 0.5 and 128 Seconds. If not defined + * in configuration file, sets 128 Seconds + */ +#ifndef CONFIG_WATCHDOG_TIMEOUT_MSECS +#define CONFIG_WATCHDOG_TIMEOUT_MSECS 128000 +#endif + timeout = (CONFIG_WATCHDOG_TIMEOUT_MSECS / 500) - 1; + writew(WCR_WDZST | WCR_WDBG | WCR_WDE | WCR_WDT | + WCR_WDW | SET_WCR_WT(timeout), &wdog->wcr); + hw_watchdog_reset(); +} +#endif + +void reset_cpu(ulong addr) +{ + struct watchdog_regs *wdog = (struct watchdog_regs *)WDOG1_BASE_ADDR; + + writew(WCR_WDE, &wdog->wcr); + writew(0x5555, &wdog->wsr); + writew(0xaaaa, &wdog->wsr); /* load minimum 1/2 second timeout */ + while (1) { + /* + * spin for .5 seconds before reset + */ + } +} diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index cdf3e15..dd0ef21 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -290,27 +290,60 @@ "uimage=uImage\0" \ "console_fsl=ttyAM0\0" \ "console_mainline=ttyAMA0\0" \ + "fdt_file=imx28-evk.dtb\0" \ + "fdt_addr=0x41000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ "mmcdev=0\0" \ "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rw\0" \ - "mmcrootfstype=ext3 rootwait\0" \ + "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ "mmcargs=setenv bootargs console=${console_mainline},${baudrate} " \ - "root=${mmcroot} " \ - "rootfstype=${mmcrootfstype}\0" \ + "root=${mmcroot}\0" \ "loadbootscript=" \ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm\0" \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" \ "netargs=setenv bootargs console=${console_mainline},${baudrate} " \ "root=/dev/nfs " \ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ "netboot=echo Booting from net ...; " \ "run netargs; " \ - "dhcp ${uimage}; bootm\0" + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${uimage}; " \ + "if test ${boot_fdt} = yes; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi;" \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 138a941..34e4295 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -61,6 +61,7 @@ #define CONFIG_MXC_UART #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_HW_WATCHDOG +#define CONFIG_IMX_WATCHDOG #define CONFIG_MXC_GPIO #define CONFIG_HARD_SPI diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index 996396b..a4b610f 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -119,24 +119,60 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "uimage=uImage\0" \ + "fdt_file=imx53-qsb.dtb\0" \ + "fdt_addr=0x71000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ "mmcdev=0\0" \ "mmcpart=2\0" \ "mmcroot=/dev/mmcblk0p3 rw rootwait\0" \ - "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot} " \ + "mmcargs=setenv bootargs console=ttymxc0,${baudrate} root=${mmcroot}\0" \ "loadbootscript=" \ "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ - "bootm\0" \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" \ "netargs=setenv bootargs console=ttymxc0,${baudrate} " \ "root=/dev/nfs " \ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ "netboot=echo Booting from net ...; " \ "run netargs; " \ - "dhcp ${uimage}; bootm\0" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${uimage}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo ERROR: Cannot load the DT; " \ + "exit; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ @@ -157,7 +193,7 @@ #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ #define CONFIG_SYS_PROMPT "MX53LOCO U-Boot > " #define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ /* Print Buffer Size */ #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h index bd2fb10..cda4512 100644 --- a/include/configs/mx6qsabre_common.h +++ b/include/configs/mx6qsabre_common.h @@ -83,10 +83,14 @@ #define CONFIG_EXTRA_ENV_SETTINGS \ "script=boot.scr\0" \ "uimage=uImage\0" \ + "fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \ + "fdt_addr=0x11000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ "console=" CONFIG_CONSOLE_DEV "\0" \ "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ - "mmcdev=0\0" \ + "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \ "mmcpart=1\0" \ "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \ @@ -96,15 +100,46 @@ "bootscript=echo Running bootscript from mmc ...; " \ "source\0" \ "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ - "mmcboot=echo Booting from mmc ...; " \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ - "bootm\0" \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" \ "netargs=setenv bootargs console=${console},${baudrate} " \ "root=/dev/nfs " \ "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ "netboot=echo Booting from net ...; " \ "run netargs; " \ - "dhcp ${uimage}; bootm\0" \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${uimage}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev};" \ diff --git a/include/configs/mx6qsabreauto.h b/include/configs/mx6qsabreauto.h index f1ff201..f4a082a 100644 --- a/include/configs/mx6qsabreauto.h +++ b/include/configs/mx6qsabreauto.h @@ -15,6 +15,7 @@ #define CONFIG_MACH_TYPE 3529 #define CONFIG_MXC_UART_BASE UART4_BASE #define CONFIG_CONSOLE_DEV "ttymxc3" +#define CONFIG_DEFAULT_FDT_FILE "imx6q-sabreauto.dtb" #define CONFIG_MMCROOT "/dev/mmcblk0p2" #define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h index 0f6bbb4..752f098 100644 --- a/include/configs/mx6qsabrelite.h +++ b/include/configs/mx6qsabrelite.h @@ -152,43 +152,78 @@ #define CONFIG_SYS_TEXT_BASE 0x17800000 #define CONFIG_EXTRA_ENV_SETTINGS \ - "script=boot.scr\0" \ - "uimage=uImage\0" \ + "script=boot.scr\0" \ + "uimage=uImage\0" \ "console=ttymxc1\0" \ - "fdt_high=0xffffffff\0" \ + "fdt_high=0xffffffff\0" \ "initrd_high=0xffffffff\0" \ - "mmcdev=0\0" \ - "mmcpart=2\0" \ - "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ - "mmcargs=setenv bootargs console=${console},${baudrate} " \ - "root=${mmcroot}\0" \ - "loadbootscript=" \ - "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ - "bootscript=echo Running bootscript from mmc ...; " \ - "source\0" \ - "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run mmcargs; " \ - "bootm\0" \ - "netargs=setenv bootargs console=${console},${baudrate} " \ - "root=/dev/nfs " \ - "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ - "netboot=echo Booting from net ...; " \ - "run netargs; " \ - "dhcp ${uimage}; bootm\0" \ + "fdt_file=imx6q-sabrelite.dtb\0" \ + "fdt_addr=0x11000000\0" \ + "boot_fdt=try\0" \ + "ip_dyn=yes\0" \ + "mmcdev=0\0" \ + "mmcpart=2\0" \ + "mmcroot=/dev/mmcblk0p3 rootwait rw\0" \ + "mmcargs=setenv bootargs console=${console},${baudrate} " \ + "root=${mmcroot}\0" \ + "loadbootscript=" \ + "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ + "bootscript=echo Running bootscript from mmc ...; " \ + "source\0" \ + "loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \ + "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if run loadfdt; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" \ + "netargs=setenv bootargs console=${console},${baudrate} " \ + "root=/dev/nfs " \ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ + "netboot=echo Booting from net ...; " \ + "run netargs; " \ + "if test ${ip_dyn} = yes; then " \ + "setenv get_cmd dhcp; " \ + "else " \ + "setenv get_cmd tftp; " \ + "fi; " \ + "${get_cmd} ${uimage}; " \ + "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ + "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ + "bootm ${loadaddr} - ${fdt_addr}; " \ + "else " \ + "if test ${boot_fdt} = try; then " \ + "bootm; " \ + "else " \ + "echo WARN: Cannot load the DT; " \ + "fi; " \ + "fi; " \ + "else " \ + "bootm; " \ + "fi;\0" #define CONFIG_BOOTCOMMAND \ - "mmc dev ${mmcdev};" \ - "mmc dev ${mmcdev}; if mmc rescan; then " \ - "if run loadbootscript; then " \ - "run bootscript; " \ - "else " \ - "if run loaduimage; then " \ - "run mmcboot; " \ - "else run netboot; " \ - "fi; " \ - "fi; " \ - "else run netboot; fi" + "mmc dev ${mmcdev};" \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "if run loadbootscript; then " \ + "run bootscript; " \ + "else " \ + "if run loaduimage; then " \ + "run mmcboot; " \ + "else run netboot; " \ + "fi; " \ + "fi; " \ + "else run netboot; fi" #define CONFIG_ARP_TIMEOUT 200UL diff --git a/include/configs/mx6qsabresd.h b/include/configs/mx6qsabresd.h index a1d9285..3b8d752 100644 --- a/include/configs/mx6qsabresd.h +++ b/include/configs/mx6qsabresd.h @@ -21,13 +21,14 @@ #define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONSOLE_DEV "ttymxc0" #define CONFIG_MMCROOT "/dev/mmcblk1p2" +#define CONFIG_DEFAULT_FDT_FILE "imx6q-sabresd.dtb" #define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024) #include "mx6qsabre_common.h" #define CONFIG_SYS_FSL_USDHC_NUM 3 #if defined(CONFIG_ENV_IS_IN_MMC) -#define CONFIG_SYS_MMC_ENV_DEV 2 /* eMMC/uSDHC4 */ +#define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC3 */ #define CONFIG_SYS_MMC_ENV_PART 1 /* Boot partition 1 */ #endif diff --git a/include/configs/qong.h b/include/configs/qong.h index d9bf201..685c618 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -52,6 +52,7 @@ #define CONFIG_MXC_GPIO #define CONFIG_HW_WATCHDOG +#define CONFIG_IMX_WATCHDOG #define CONFIG_MXC_SPI #define CONFIG_DEFAULT_SPI_BUS 1 diff --git a/include/watchdog.h b/include/watchdog.h index b959914..328a30b 100644 --- a/include/watchdog.h +++ b/include/watchdog.h @@ -35,6 +35,7 @@ * Hardware watchdog */ #ifdef CONFIG_HW_WATCHDOG + void hw_watchdog_init(void); #if defined(__ASSEMBLY__) #define WATCHDOG_RESET bl hw_watchdog_reset #else |