diff options
| -rw-r--r-- | README | 8 | ||||
| -rw-r--r-- | common/bootstage.c | 17 | ||||
| -rw-r--r-- | drivers/mtd/spr_smi.c | 5 | ||||
| -rw-r--r-- | include/bootstage.h | 7 | ||||
| -rw-r--r-- | include/common.h | 7 | ||||
| -rw-r--r-- | include/configs/EB+MCF-EV123.h | 3 | ||||
| -rw-r--r-- | lib/time.c | 17 | ||||
| -rw-r--r-- | tools/mkenvimage.c | 4 |
8 files changed, 31 insertions, 37 deletions
@@ -3499,7 +3499,7 @@ is done by typing: make NAME_config where "NAME_config" is the name of one of the existing configu- -rations; see the main Makefile for supported names. +rations; see boards.cfg for supported names. Note: for some board special configuration names may exist; check if additional information is available from the board vendor; for @@ -3554,10 +3554,8 @@ to port U-Boot to your hardware platform. To do this, follow these steps: 1. Add a new configuration option for your board to the toplevel - "Makefile" and to the "MAKEALL" script, using the existing - entries as examples. Note that here and at many other places - boards and other names are listed in alphabetical sort order. Please - keep this order. + "boards.cfg" file, using the existing entries as examples. + Follow the instructions there to keep the boards in order. 2. Create a new directory to hold your board specific code. Add any files you need. In your board directory, you will need at least the "Makefile", a "<board>.c", "flash.c" and "u-boot.lds". diff --git a/common/bootstage.c b/common/bootstage.c index d2bbe63..4e01d92 100644 --- a/common/bootstage.c +++ b/common/bootstage.c @@ -156,3 +156,20 @@ void bootstage_report(void) "- please increase CONFIG_BOOTSTAGE_USER_COUNT\n", next_id - BOOTSTAGE_ID_COUNT); } + +ulong __timer_get_boot_us(void) +{ + static ulong base_time; + + /* + * We can't implement this properly. Return 0 on the first call and + * larger values after that. + */ + if (base_time) + return get_timer(base_time) * 1000; + base_time = get_timer(0); + return 0; +} + +ulong timer_get_boot_us(void) + __attribute__((weak, alias("__timer_get_boot_us"))); diff --git a/drivers/mtd/spr_smi.c b/drivers/mtd/spr_smi.c index 9a70a19..6d4257a 100644 --- a/drivers/mtd/spr_smi.c +++ b/drivers/mtd/spr_smi.c @@ -322,24 +322,19 @@ static int smi_write(unsigned int *src_addr, unsigned int *dst_addr, unsigned int length, ulong bank_addr) { int banknum; - unsigned int WM; switch (bank_addr) { case SMIBANK0_BASE: banknum = BANK0; - WM = WM0; break; case SMIBANK1_BASE: banknum = BANK1; - WM = WM1; break; case SMIBANK2_BASE: banknum = BANK2; - WM = WM2; break; case SMIBANK3_BASE: banknum = BANK3; - WM = WM3; break; default: return -1; diff --git a/include/bootstage.h b/include/bootstage.h index 06ab2c8..a000538 100644 --- a/include/bootstage.h +++ b/include/bootstage.h @@ -204,6 +204,13 @@ enum bootstage_id { }; /* + * Return the time since boot in microseconds, This is needed for bootstage + * and should be defined in CPU- or board-specific code. If undefined then + * millisecond resolution will be used (the standard get_timer()). + */ +ulong timer_get_boot_us(void); + +/* * Board code can implement show_boot_progress() if needed. * * @param val Progress state (enum bootstage_id), or -id if an error diff --git a/include/common.h b/include/common.h index 74d9704..4b5841e 100644 --- a/include/common.h +++ b/include/common.h @@ -207,13 +207,6 @@ typedef void (interrupt_handler_t)(void *); #endif /* CONFIG_SERIAL_MULTI */ /* - * Return the time since boot in microseconds, This is needed for bootstage - * and should be defined in CPU- or board-specific code. If undefined then - * millisecond resolution will be used (the standard get_timer()). - */ -ulong timer_get_boot_us(void); - -/* * General Purpose Utilities */ #define min(X, Y) \ diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h index 1f774a9..346b49c 100644 --- a/include/configs/EB+MCF-EV123.h +++ b/include/configs/EB+MCF-EV123.h @@ -90,7 +90,8 @@ #define CONFIG_BOOTDELAY 5 -#define CONFIG_HUSH_PARSER +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_PROMPT "\nEV123 U-Boot> " #define CONFIG_SYS_LONGHELP 1 @@ -47,20 +47,3 @@ void mdelay(unsigned long msec) while (msec--) udelay(1000); } - -ulong __timer_get_boot_us(void) -{ - static ulong base_time; - - /* - * We can't implement this properly. Return 0 on the first call and - * larger values after that. - */ - if (base_time) - return get_timer(base_time) * 1000; - base_time = get_timer(0); - return 0; -} - -ulong timer_get_boot_us(void) - __attribute__((weak, alias("__timer_get_boot_us"))); diff --git a/tools/mkenvimage.c b/tools/mkenvimage.c index 9dbb3b2..bfc4eb6 100644 --- a/tools/mkenvimage.c +++ b/tools/mkenvimage.c @@ -213,7 +213,7 @@ int main(int argc, char **argv) filebuf = mmap(NULL, sizeof(*envptr) * filesize, PROT_READ, MAP_PRIVATE, txt_fd, 0); if (filebuf == MAP_FAILED) { - fprintf(stderr, "mmap (%ld bytes) failed: %s\n", + fprintf(stderr, "mmap (%zu bytes) failed: %s\n", sizeof(*envptr) * filesize, strerror(errno)); fprintf(stderr, "Falling back to read()\n"); @@ -221,7 +221,7 @@ int main(int argc, char **argv) filebuf = malloc(sizeof(*envptr) * filesize); ret = read(txt_fd, filebuf, sizeof(*envptr) * filesize); if (ret != sizeof(*envptr) * filesize) { - fprintf(stderr, "Can't read the whole input file (%ld bytes): %s\n", + fprintf(stderr, "Can't read the whole input file (%zu bytes): %s\n", sizeof(*envptr) * filesize, strerror(errno)); |