diff options
26 files changed, 686 insertions, 83 deletions
@@ -890,7 +890,7 @@ MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \ spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE $(call if_changed,mkimage) -OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_MAX_SIZE) +OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE $(call if_changed,pad_cat) diff --git a/arch/arm/include/asm/arch-am33xx/clock.h b/arch/arm/include/asm/arch-am33xx/clock.h index 7637457..f00fad3 100644 --- a/arch/arm/include/asm/arch-am33xx/clock.h +++ b/arch/arm/include/asm/arch-am33xx/clock.h @@ -42,6 +42,8 @@ #define MODULE_CLKCTRL_IDLEST_DISABLED 3 /* CM_CLKMODE_DPLL */ +#define CM_CLKMODE_DPLL_SSC_EN_SHIFT 12 +#define CM_CLKMODE_DPLL_SSC_EN_MASK (1 << 12) #define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11 #define CM_CLKMODE_DPLL_REGM4XEN_MASK (1 << 11) #define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT 10 diff --git a/arch/arm/include/asm/arch-omap5/clock.h b/arch/arm/include/asm/arch-omap5/clock.h index 2dfe4ef..30d9de2 100644 --- a/arch/arm/include/asm/arch-omap5/clock.h +++ b/arch/arm/include/asm/arch-omap5/clock.h @@ -322,6 +322,9 @@ #define V_SCLK V_OSCK +/* CKO buffer control */ +#define CKOBUFFER_CLK_ENABLE_MASK (1 << 28) + /* AUXCLKx reg fields */ #define AUXCLK_ENABLE_MASK (1 << 8) #define AUXCLK_SRCSELECT_SHIFT 1 diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h index 19fdece..e35a81a 100644 --- a/arch/arm/include/asm/arch-omap5/omap.h +++ b/arch/arm/include/asm/arch-omap5/omap.h @@ -50,6 +50,7 @@ #define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000) #define UART2_BASE (OMAP54XX_L4_PER_BASE + 0x6c000) #define UART3_BASE (OMAP54XX_L4_PER_BASE + 0x20000) +#define UART4_BASE (OMAP54XX_L4_PER_BASE + 0x6e000) /* General Purpose Timers */ #define GPT1_BASE (OMAP54XX_L4_WKUP_BASE + 0x18000) diff --git a/board/gumstix/pepper/Makefile b/board/gumstix/pepper/Makefile new file mode 100644 index 0000000..ecb1d61 --- /dev/null +++ b/board/gumstix/pepper/Makefile @@ -0,0 +1,13 @@ +# +# Makefile +# +# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ +# +# SPDX-License-Identifier: GPL-2.0+ +# + +ifdef CONFIG_SPL_BUILD +obj-y += mux.o +endif + +obj-y += board.o diff --git a/board/gumstix/pepper/board.c b/board/gumstix/pepper/board.c new file mode 100644 index 0000000..75aac49 --- /dev/null +++ b/board/gumstix/pepper/board.c @@ -0,0 +1,226 @@ +/* + * Board functions for Gumstix Pepper and AM335x-based boards + * + * Copyright (C) 2014, Gumstix, Incorporated - http://www.gumstix.com/ + * Based on board/ti/am335x/board.c from Texas Instruments, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/mem.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include <power/tps65217.h> +#include <environment.h> +#include <watchdog.h> +#include "board.h" + +DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_SPL_BUILD +static const struct ddr_data ddr2_data = { + .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) | + (MT47H128M16RT25E_RD_DQS<<20) | + (MT47H128M16RT25E_RD_DQS<<10) | + (MT47H128M16RT25E_RD_DQS<<0)), + .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) | + (MT47H128M16RT25E_WR_DQS<<20) | + (MT47H128M16RT25E_WR_DQS<<10) | + (MT47H128M16RT25E_WR_DQS<<0)), + .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) | + (MT47H128M16RT25E_PHY_WRLVL<<20) | + (MT47H128M16RT25E_PHY_WRLVL<<10) | + (MT47H128M16RT25E_PHY_WRLVL<<0)), + .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) | + (MT47H128M16RT25E_PHY_GATELVL<<20) | + (MT47H128M16RT25E_PHY_GATELVL<<10) | + (MT47H128M16RT25E_PHY_GATELVL<<0)), + .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) | + (MT47H128M16RT25E_PHY_FIFO_WE<<20) | + (MT47H128M16RT25E_PHY_FIFO_WE<<10) | + (MT47H128M16RT25E_PHY_FIFO_WE<<0)), + .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) | + (MT47H128M16RT25E_PHY_WR_DATA<<20) | + (MT47H128M16RT25E_PHY_WR_DATA<<10) | + (MT47H128M16RT25E_PHY_WR_DATA<<0)), +}; + +static const struct cmd_control ddr2_cmd_ctrl_data = { + .cmd0csratio = MT47H128M16RT25E_RATIO, + .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT, + + .cmd1csratio = MT47H128M16RT25E_RATIO, + .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT, + + .cmd2csratio = MT47H128M16RT25E_RATIO, + .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT, +}; + +static const struct emif_regs ddr2_emif_reg_data = { + .sdram_config = MT47H128M16RT25E_EMIF_SDCFG, + .ref_ctrl = MT47H128M16RT25E_EMIF_SDREF, + .sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1, + .sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2, + .sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3, + .emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY, +}; + +#ifdef CONFIG_SPL_OS_BOOT +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + return serial_tstc() && serial_getc() == 'c'; +} +#endif + +#define OSC (V_OSCK/1000000) +const struct dpll_params dpll_ddr = {266, OSC-1, 1, -1, -1, -1, -1}; + +const struct dpll_params *get_dpll_ddr_params(void) +{ + return &dpll_ddr; +} + +void set_uart_mux_conf(void) +{ + enable_uart0_pin_mux(); +} + +void set_mux_conf_regs(void) +{ + enable_board_pin_mux(); +} + +const struct ctrl_ioregs ioregs = { + .cm0ioctl = MT47H128M16RT25E_IOCTRL_VALUE, + .cm1ioctl = MT47H128M16RT25E_IOCTRL_VALUE, + .cm2ioctl = MT47H128M16RT25E_IOCTRL_VALUE, + .dt0ioctl = MT47H128M16RT25E_IOCTRL_VALUE, + .dt1ioctl = MT47H128M16RT25E_IOCTRL_VALUE, +}; + +void sdram_init(void) +{ + config_ddr(266, &ioregs, &ddr2_data, + &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0); +} +#endif + +int board_init(void) +{ +#if defined(CONFIG_HW_WATCHDOG) + hw_watchdog_init(); +#endif + + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + gpmc_init(); + + return 0; +} + +#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \ + (defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD)) +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_addr = 0, + .phy_if = PHY_INTERFACE_MODE_RGMII, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = CPSW_MDIO_BASE, + .cpsw_base = CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; + +int board_eth_init(bd_t *bis) +{ + int rv, n = 0; + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + const char *devname; + + if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + } + + writel((RGMII_MODE_ENABLE | RGMII_INT_DELAY), &cdev->miisel); + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + else + n += rv; + + /* + * + * CPSW RGMII Internal Delay Mode is not supported in all PVT + * operating points. So we must set the TX clock delay feature + * in the KSZ9021 PHY. Since we only support a single ethernet + * device in U-Boot, we only do this for the current instance. + */ + devname = miiphy_get_current_dev(); + /* max rx/tx clock delay, min rx/tx control delay */ + miiphy_write(devname, 0x0, 0x0b, 0x8104); + miiphy_write(devname, 0x0, 0xc, 0xa0a0); + + /* min rx data delay */ + miiphy_write(devname, 0x0, 0x0b, 0x8105); + miiphy_write(devname, 0x0, 0x0c, 0x0000); + + /* min tx data delay */ + miiphy_write(devname, 0x0, 0x0b, 0x8106); + miiphy_write(devname, 0x0, 0x0c, 0x0000); + + return n; +} +#endif diff --git a/board/gumstix/pepper/board.h b/board/gumstix/pepper/board.h new file mode 100644 index 0000000..0512735 --- /dev/null +++ b/board/gumstix/pepper/board.h @@ -0,0 +1,19 @@ +/* + * Gumstix Pepper and AM335x-based boards information header + * + * Copyright (C) 2014, Gumstix, Inc. - http://www.gumstix.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * We must be able to enable uart0, for initial output. We then have a + * main pinmux function that can be overridden to enable all other pinmux that + * is required on the board. + */ +void enable_uart0_pin_mux(void); +void enable_board_pin_mux(void); +#endif diff --git a/board/gumstix/pepper/mux.c b/board/gumstix/pepper/mux.c new file mode 100644 index 0000000..50b1266 --- /dev/null +++ b/board/gumstix/pepper/mux.c @@ -0,0 +1,78 @@ +/* + * Muxing for Gumstix Pepper and AM335x-based boards + * + * Copyright (C) 2014, Gumstix, Incorporated - http://www.gumstix.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> +#include <i2c.h> +#include "board.h" + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ + {-1}, +}; + +static struct module_pin_mux mmc0_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ + {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ + {-1}, +}; + +static struct module_pin_mux i2c0_pin_mux[] = { + /* I2C_DATA */ + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + /* I2C_SCLK */ + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | PULLUDEN | SLEWCTRL)}, + {-1}, +}; + +static struct module_pin_mux rgmii1_pin_mux[] = { + {OFFSET(mii1_txen), MODE(2)}, /* RGMII1_TCTL */ + {OFFSET(mii1_rxdv), MODE(2) | RXACTIVE}, /* RGMII1_RCTL */ + {OFFSET(mii1_txd3), MODE(2)}, /* RGMII1_TD3 */ + {OFFSET(mii1_txd2), MODE(2)}, /* RGMII1_TD2 */ + {OFFSET(mii1_txd1), MODE(2)}, /* RGMII1_TD1 */ + {OFFSET(mii1_txd0), MODE(2)}, /* RGMII1_TD0 */ + {OFFSET(mii1_txclk), MODE(2)}, /* RGMII1_TCLK */ + {OFFSET(mii1_rxclk), MODE(2) | RXACTIVE}, /* RGMII1_RCLK */ + {OFFSET(mii1_rxd3), MODE(2) | RXACTIVE}, /* RGMII1_RD3 */ + {OFFSET(mii1_rxd2), MODE(2) | RXACTIVE}, /* RGMII1_RD2 */ + {OFFSET(mii1_rxd1), MODE(2) | RXACTIVE}, /* RGMII1_RD1 */ + {OFFSET(mii1_rxd0), MODE(2) | RXACTIVE}, /* RGMII1_RD0 */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN},/* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {OFFSET(rmii1_refclk), MODE(7) | RXACTIVE}, /* ETH_INT */ + {OFFSET(mii1_col), MODE(7) | PULLUP_EN}, /* PHY_NRESET */ + {OFFSET(xdma_event_intr1), MODE(3)}, + {-1}, +}; + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +/* + * Do board-specific muxes. + */ +void enable_board_pin_mux(void) +{ + /* I2C0 */ + configure_module_pin_mux(i2c0_pin_mux); + /* SD Card */ + configure_module_pin_mux(mmc0_pin_mux); + /* Ethernet pinmux. */ + configure_module_pin_mux(rgmii1_pin_mux); +} diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c index 7e8731b..2782bcc 100644 --- a/board/siemens/common/board.c +++ b/board/siemens/common/board.c @@ -128,12 +128,6 @@ do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) button = 0; gpio_free(gpio); - if (!button) { - /* LED0 - RED=1: GPIO2_0 2*32 = 64 */ - gpio_request(BOARD_DFU_BUTTON_LED, ""); - gpio_direction_output(BOARD_DFU_BUTTON_LED, 1); - gpio_set_value(BOARD_DFU_BUTTON_LED, 1); - } return button; } @@ -144,6 +138,46 @@ U_BOOT_CMD( "" ); #endif +/* + * This command sets led + * Input - name of led + * value of led + * Returns - 1 if input does not match + * 0 if led was set + */ +static int +do_setled(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int gpio = 0; + if (argc != 3) + goto exit; +#if defined(BOARD_STATUS_LED) + if (!strcmp(argv[1], "stat")) + gpio = BOARD_STATUS_LED; +#endif +#if defined(BOARD_DFU_BUTTON_LED) + if (!strcmp(argv[1], "dfu")) + gpio = BOARD_DFU_BUTTON_LED; +#endif + /* If argument does not mach exit */ + if (gpio == 0) + goto exit; + gpio_request(gpio, ""); + gpio_direction_output(gpio, 1); + if (!strcmp(argv[2], "1")) + gpio_set_value(gpio, 1); + else + gpio_set_value(gpio, 0); + return 0; +exit: + return 1; +} + +U_BOOT_CMD( + led, CONFIG_SYS_MAXARGS, 2, do_setled, + "Set led on or off", + "dfu val - set dfu led\nled stat val - set status led" +); static int do_usertestwdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) diff --git a/board/siemens/dxr2/Makefile b/board/siemens/draco/Makefile index f159932..f159932 100644 --- a/board/siemens/dxr2/Makefile +++ b/board/siemens/draco/Makefile diff --git a/board/siemens/dxr2/board.c b/board/siemens/draco/board.c index 38ac93d..9be2e34 100644 --- a/board/siemens/dxr2/board.c +++ b/board/siemens/draco/board.c @@ -1,5 +1,5 @@ /* - * Board functions for TI AM335X based dxr2 board + * Board functions for TI AM335X based draco board * (C) Copyright 2013 Siemens Schweiz AG * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. * @@ -37,13 +37,27 @@ DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_SPL_BUILD -static struct dxr2_baseboard_id __attribute__((section(".data"))) settings; -/* @303MHz-i0 */ +static struct draco_baseboard_id __attribute__((section(".data"))) settings; + +#if DDR_PLL_FREQ == 303 +/* Default@303MHz-i0 */ +const struct ddr3_data ddr3_default = { + 0x33524444, 0x56312e35, 0x0080, 0x0000, 0x003A, 0x003F, 0x009F, + 0x0079, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32, + 0x0000093B, 0x0000014A, + "default name @303MHz \0", + "default marking \0", +}; +#elif DDR_PLL_FREQ == 400 +/* Default@400MHz-i0 */ const struct ddr3_data ddr3_default = { - 0x33524444, 0x56312e34, 0x0080, 0x0000, 0x0038, 0x003E, 0x00A4, - 0x0075, 0x0888A39B, 0x26247FDA, 0x501F821F, 0x00100206, 0x61A44A32, + 0x33524444, 0x56312e35, 0x0080, 0x0000, 0x0039, 0x0046, 0x00ab, + 0x0080, 0x0AAAA4DB, 0x26307FDA, 0x501F821F, 0x00100207, 0x61A45232, 0x00000618, 0x0000014A, + "default name @400MHz \0", + "default marking \0", }; +#endif static void set_default_ddr3_timings(void) { @@ -53,8 +67,12 @@ static void set_default_ddr3_timings(void) static void print_ddr3_timings(void) { - printf("\n\nDDR3 Timing parameters:\n"); - printf("Diff Eeprom Default\n"); + printf("\nDDR3\n"); + printf("clock:\t\t%d MHz\n", DDR_PLL_FREQ); + printf("device:\t\t%s\n", settings.ddr3.manu_name); + printf("marking:\t%s\n", settings.ddr3.manu_marking); + printf("timing parameters\n"); + printf("diff\teeprom\tdefault\n"); PRINTARGS(magic); PRINTARGS(version); PRINTARGS(ddr3_sratio); @@ -78,9 +96,9 @@ static void print_ddr3_timings(void) static void print_chip_data(void) { - printf("\n"); - printf("Device: '%s'\n", settings.chip.sdevname); - printf("HW version: '%s'\n", settings.chip.shwver); + printf("\nCPU BOARD\n"); + printf("device: \t'%s'\n", settings.chip.sdevname); + printf("hw version: \t'%s'\n", settings.chip.shwver); } #endif /* CONFIG_SPL_BUILD */ @@ -112,20 +130,18 @@ static int read_eeprom(void) printf("Using DDR3 settings from EEPROM\n"); } else { if (ddr3_default.magic != settings.ddr3.magic) - printf("Error: No valid DDR3 data in eeprom.\n"); + printf("Warning: No valid DDR3 data in eeprom.\n"); if (ddr3_default.version != settings.ddr3.version) - printf("Error: DDR3 data version does not match.\n"); + printf("Warning: DDR3 data version does not match.\n"); printf("Using default settings\n"); set_default_ddr3_timings(); } - if (MAGIC_CHIP == settings.chip.magic) { - printf("Valid chip data in eeprom\n"); + if (MAGIC_CHIP == settings.chip.magic) print_chip_data(); - } else { - printf("Error: No chip data in eeprom\n"); - } + else + printf("Warning: No chip data in eeprom\n"); print_ddr3_timings(); #endif @@ -135,48 +151,48 @@ static int read_eeprom(void) #ifdef CONFIG_SPL_BUILD static void board_init_ddr(void) { -struct emif_regs dxr2_ddr3_emif_reg_data = { +struct emif_regs draco_ddr3_emif_reg_data = { .zq_config = 0x50074BE4, }; -struct ddr_data dxr2_ddr3_data = { +struct ddr_data draco_ddr3_data = { }; -struct cmd_control dxr2_ddr3_cmd_ctrl_data = { +struct cmd_control draco_ddr3_cmd_ctrl_data = { }; -struct ctrl_ioregs dxr2_ddr3_ioregs = { +struct ctrl_ioregs draco_ddr3_ioregs = { }; /* pass values from eeprom */ - dxr2_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1; - dxr2_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2; - dxr2_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3; - dxr2_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 = + draco_ddr3_emif_reg_data.sdram_tim1 = settings.ddr3.sdram_tim1; + draco_ddr3_emif_reg_data.sdram_tim2 = settings.ddr3.sdram_tim2; + draco_ddr3_emif_reg_data.sdram_tim3 = settings.ddr3.sdram_tim3; + draco_ddr3_emif_reg_data.emif_ddr_phy_ctlr_1 = settings.ddr3.emif_ddr_phy_ctlr_1; - dxr2_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config; - dxr2_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl; - - dxr2_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0; - dxr2_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0; - dxr2_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0; - dxr2_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0; - - dxr2_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio; - dxr2_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout; - dxr2_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio; - dxr2_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout; - dxr2_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio; - dxr2_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout; - - dxr2_ddr3_ioregs.cm0ioctl = settings.ddr3.ioctr_val, - dxr2_ddr3_ioregs.cm1ioctl = settings.ddr3.ioctr_val, - dxr2_ddr3_ioregs.cm2ioctl = settings.ddr3.ioctr_val, - dxr2_ddr3_ioregs.dt0ioctl = settings.ddr3.ioctr_val, - dxr2_ddr3_ioregs.dt1ioctl = settings.ddr3.ioctr_val, - - config_ddr(DDR_PLL_FREQ, &dxr2_ddr3_ioregs, &dxr2_ddr3_data, - &dxr2_ddr3_cmd_ctrl_data, &dxr2_ddr3_emif_reg_data, 0); + draco_ddr3_emif_reg_data.sdram_config = settings.ddr3.sdram_config; + draco_ddr3_emif_reg_data.ref_ctrl = settings.ddr3.ref_ctrl; + + draco_ddr3_data.datardsratio0 = settings.ddr3.dt0rdsratio0; + draco_ddr3_data.datawdsratio0 = settings.ddr3.dt0wdsratio0; + draco_ddr3_data.datafwsratio0 = settings.ddr3.dt0fwsratio0; + draco_ddr3_data.datawrsratio0 = settings.ddr3.dt0wrsratio0; + + draco_ddr3_cmd_ctrl_data.cmd0csratio = settings.ddr3.ddr3_sratio; + draco_ddr3_cmd_ctrl_data.cmd0iclkout = settings.ddr3.iclkout; + draco_ddr3_cmd_ctrl_data.cmd1csratio = settings.ddr3.ddr3_sratio; + draco_ddr3_cmd_ctrl_data.cmd1iclkout = settings.ddr3.iclkout; + draco_ddr3_cmd_ctrl_data.cmd2csratio = settings.ddr3.ddr3_sratio; + draco_ddr3_cmd_ctrl_data.cmd2iclkout = settings.ddr3.iclkout; + + draco_ddr3_ioregs.cm0ioctl = settings.ddr3.ioctr_val, + draco_ddr3_ioregs.cm1ioctl = settings.ddr3.ioctr_val, + draco_ddr3_ioregs.cm2ioctl = settings.ddr3.ioctr_val, + draco_ddr3_ioregs.dt0ioctl = settings.ddr3.ioctr_val, + draco_ddr3_ioregs.dt1ioctl = settings.ddr3.ioctr_val, + + config_ddr(DDR_PLL_FREQ, &draco_ddr3_ioregs, &draco_ddr3_data, + &draco_ddr3_cmd_ctrl_data, &draco_ddr3_emif_reg_data, 0); } static void spl_siemens_board_init(void) diff --git a/board/siemens/dxr2/board.h b/board/siemens/draco/board.h index abf5432..ff8ab76 100644 --- a/board/siemens/dxr2/board.h +++ b/board/siemens/draco/board.h @@ -22,24 +22,26 @@ #define MAGIC_CHIP 0x50494843 /* Automatic generated definition */ -/* Wed, 18 Sep 2013 18:58:27 +0200 */ -/* From file: draco/ddr3-data-micron-v2.txt */ +/* Wed, 16 Apr 2014 16:50:41 +0200 */ +/* From file: draco/ddr3-data-universal-default@303MHz-i0-ES3.txt */ struct ddr3_data { unsigned int magic; /* 0x33524444 */ - unsigned int version; /* 0x56312e34 */ - unsigned short int ddr3_sratio; /* 0x0100 */ - unsigned short int iclkout; /* 0x0001 */ + unsigned int version; /* 0x56312e35 */ + unsigned short int ddr3_sratio; /* 0x0080 */ + unsigned short int iclkout; /* 0x0000 */ unsigned short int dt0rdsratio0; /* 0x003A */ - unsigned short int dt0wdsratio0; /* 0x008A */ - unsigned short int dt0fwsratio0; /* 0x010B */ - unsigned short int dt0wrsratio0; /* 0x00C4 */ + unsigned short int dt0wdsratio0; /* 0x003F */ + unsigned short int dt0fwsratio0; /* 0x009F */ + unsigned short int dt0wrsratio0; /* 0x0079 */ unsigned int sdram_tim1; /* 0x0888A39B */ unsigned int sdram_tim2; /* 0x26247FDA */ unsigned int sdram_tim3; /* 0x501F821F */ unsigned int emif_ddr_phy_ctlr_1; /* 0x00100206 */ - unsigned int sdram_config; /* 0x61C04AB2 */ - unsigned int ref_ctrl; /* 0x00000618 */ - unsigned int ioctr_val; /* 0x0000018B */ + unsigned int sdram_config; /* 0x61A44A32 */ + unsigned int ref_ctrl; /* 0x0000093B */ + unsigned int ioctr_val; /* 0x0000014A */ + char manu_name[32]; /* "default@303MHz \0" */ + char manu_marking[32]; /* "default \0" */ }; struct chip_data { @@ -48,7 +50,7 @@ struct chip_data { char shwver[7]; }; -struct dxr2_baseboard_id { +struct draco_baseboard_id { struct ddr3_data ddr3; struct chip_data chip; }; diff --git a/board/siemens/dxr2/mux.c b/board/siemens/draco/mux.c index f2314b5..eaa3c70 100644 --- a/board/siemens/dxr2/mux.c +++ b/board/siemens/draco/mux.c @@ -1,5 +1,5 @@ /* - * pinmux setup for siemens dxr2 board + * pinmux setup for siemens draco board * * (C) Copyright 2013 Siemens Schweiz AG * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c index 98083d5..64e69dc 100644 --- a/board/siemens/pxm2/board.c +++ b/board/siemens/pxm2/board.c @@ -70,11 +70,11 @@ struct cmd_control pxm2_ddr3_cmd_ctrl_data = { }; const struct ctrl_ioregs ioregs = { - .cm0ioctl = DXR2_IOCTRL_VAL, - .cm1ioctl = DXR2_IOCTRL_VAL, - .cm2ioctl = DXR2_IOCTRL_VAL, - .dt0ioctl = DXR2_IOCTRL_VAL, - .dt1ioctl = DXR2_IOCTRL_VAL, + .cm0ioctl = DDR_IOCTRL_VAL, + .cm1ioctl = DDR_IOCTRL_VAL, + .cm2ioctl = DDR_IOCTRL_VAL, + .dt0ioctl = DDR_IOCTRL_VAL, + .dt1ioctl = DDR_IOCTRL_VAL, }; config_ddr(DDR_PLL_FREQ, &ioregs, &pxm2_ddr3_data, diff --git a/board/siemens/rut/board.c b/board/siemens/rut/board.c index e0ada3f..1752df2 100644 --- a/board/siemens/rut/board.c +++ b/board/siemens/rut/board.c @@ -400,7 +400,7 @@ static int conf_disp_pll(int m, int n) #if defined(DISPL_PLL_SPREAD_SPECTRUM) writel(0x64, &cmwkup->resv6[3]); /* 0x50 */ writel(0x800, &cmwkup->resv6[2]); /* 0x4c */ - writel(readl(&cmwkup->clkmoddplldisp) | (1 << 12), + writel(readl(&cmwkup->clkmoddplldisp) | CM_CLKMODE_DPLL_SSC_EN_MASK, &cmwkup->clkmoddplldisp); /* 0x98 */ #endif return 0; @@ -257,10 +257,12 @@ Active arm armv7 am33xx BuR tseries Active arm armv7 am33xx BuR tseries tseries_nand tseries:SERIAL1,CONS_INDEX=1,NAND Hannes Petermaier <hannes.petermaier@br-automation.com> Active arm armv7 am33xx BuR tseries tseries_spi tseries:SERIAL1,CONS_INDEX=1,SPI_BOOT,EMMC_BOOT Hannes Petermaier <hannes.petermaier@br-automation.com> Active arm armv7 am33xx compulab cm_t335 cm_t335 - Igor Grinberg <grinberg@compulab.co.il> +Active arm armv7 am33xx gumstix pepper pepper - Ash Charles <ash@gumstix.com> Active arm armv7 am33xx isee igep0033 am335x_igep0033 - Enric Balletbo i Serra <eballetbo@iseebcn.com> Active arm armv7 am33xx phytec pcm051 pcm051_rev1 pcm051:REV1 Lars Poeschel <poeschel@lemonage.de> Active arm armv7 am33xx phytec pcm051 pcm051_rev3 pcm051:REV3 Lars Poeschel <poeschel@lemonage.de> -Active arm armv7 am33xx siemens dxr2 dxr2 - Roger Meier <r.meier@siemens.com> +Active arm armv7 am33xx siemens draco draco - Roger Meier <r.meier@siemens.com> +Active arm armv7 am33xx siemens draco dxr2 - Roger Meier <r.meier@siemens.com> Active arm armv7 am33xx siemens pxm2 pxm2 - Roger Meier <r.meier@siemens.com> Active arm armv7 am33xx siemens rut rut - Roger Meier <r.meier@siemens.com> Active arm armv7 am33xx silica pengwyn pengwyn - Lothar Felten <lothar.felten@gmail.com> diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index 881a636..bf99b8e 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -403,7 +403,7 @@ static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat, dat[byte_pos] ^= 1 << bit_pos; printf("nand: bit-flip corrected @data=%d\n", byte_pos); } else if (byte_pos < error_max) { - read_ecc[byte_pos - SECTOR_BYTES] = 1 << bit_pos; + read_ecc[byte_pos - SECTOR_BYTES] ^= 1 << bit_pos; printf("nand: bit-flip corrected @oob=%d\n", byte_pos - SECTOR_BYTES); } else { diff --git a/include/configs/da850evm.h b/include/configs/da850evm.h index 860a11d..b279409 100644 --- a/include/configs/da850evm.h +++ b/include/configs/da850evm.h @@ -386,6 +386,7 @@ #define CONFIG_SPL_STACK 0x8001ff00 #define CONFIG_SPL_TEXT_BASE 0x80000000 #define CONFIG_SPL_MAX_FOOTPRINT 32768 +#define CONFIG_SPL_PAD_TO 32768 #endif /* Load U-Boot Image From MMC */ diff --git a/include/configs/draco.h b/include/configs/draco.h new file mode 100644 index 0000000..a2438d8 --- /dev/null +++ b/include/configs/draco.h @@ -0,0 +1,92 @@ +/* + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * U-Boot file:/include/configs/am335x_evm.h + * + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_DRACO_H +#define __CONFIG_DRACO_H + +#define CONFIG_SIEMENS_DRACO +#define MACH_TYPE_DRACO 4314 +#define CONFIG_SIEMENS_MACH_TYPE MACH_TYPE_DRACO + +#include "siemens-am33x-common.h" + +#define CONFIG_SYS_MPUCLK 275 +#define DDR_PLL_FREQ 303 +#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC + +#define BOARD_DFU_BUTTON_GPIO 27 +#define BOARD_DFU_BUTTON_LED 64 /* red LED */ +#define BOARD_STATUS_LED 103 /* green LED */ +#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ + +#undef CONFIG_DOS_PARTITION +#undef CONFIG_CMD_FAT + + + /* Physical Memory Map */ +#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ + +/* I2C Configuration */ +#define CONFIG_SYS_I2C_SPEED 100000 + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 +#define EEPROM_ADDR_DDR3 0x90 +#define EEPROM_ADDR_CHIP 0x120 + +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300 + +#undef CONFIG_SPL_NET_SUPPORT +#undef CONFIG_SPL_NET_VCI_STRING +#undef CONFIG_SPL_ETH_SUPPORT + +#undef CONFIG_MII +#undef CONFIG_PHY_GIGE +#define CONFIG_PHY_SMSC + +#define CONFIG_FACTORYSET + +/* Watchdog */ +#define CONFIG_OMAP_WATCHDOG + +#ifndef CONFIG_SPL_BUILD + +/* Default env settings */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + "nand_img_size=0x400000\0" \ + "optargs=\0" \ + CONFIG_COMMON_ENV_SETTINGS + +#ifndef CONFIG_RESTORE_FLASH +/* set to negative value for no autoboot */ +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_BOOTCOMMAND \ +"if dfubutton; then " \ + "run dfu_start; " \ + "reset; " \ +"fi;" \ +"run nand_boot;" \ +"reset;" + + +#else +#define CONFIG_BOOTDELAY 0 + +#define CONFIG_BOOTCOMMAND \ + "setenv autoload no; " \ + "dhcp; " \ + "if tftp 80000000 debrick.scr; then " \ + "source 80000000; " \ + "fi" +#endif +#endif /* CONFIG_SPL_BUILD */ +#endif /* ! __CONFIG_DRACO_H */ diff --git a/include/configs/dxr2.h b/include/configs/dxr2.h index 75f7812..76e6cac 100644 --- a/include/configs/dxr2.h +++ b/include/configs/dxr2.h @@ -20,12 +20,12 @@ #include "siemens-am33x-common.h" #define CONFIG_SYS_MPUCLK 275 -#define DXR2_IOCTRL_VAL 0x18b #define DDR_PLL_FREQ 303 #undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC #define BOARD_DFU_BUTTON_GPIO 27 -#define BOARD_DFU_BUTTON_LED 64 +#define BOARD_DFU_BUTTON_LED 64 /* red LED */ +#define BOARD_STATUS_LED 103 /* green LED */ #define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ #undef CONFIG_DOS_PARTITION diff --git a/include/configs/k2hk_evm.h b/include/configs/k2hk_evm.h index 9bb8f34..dde7329 100644 --- a/include/configs/k2hk_evm.h +++ b/include/configs/k2hk_evm.h @@ -165,6 +165,7 @@ #define CONFIG_CMD_EEPROM /* U-Boot general configuration */ +#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_PROMPT "K2HK EVM # " #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SYS_PBSIZE 2048 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index fae0e6f..d07e52d 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -170,11 +170,17 @@ "if test $beaglerev = C4; then " \ "setenv fdtfile omap3-beagle.dtb; fi; " \ "if test $beaglerev = xMAB; then " \ - "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ + "setenv fdtfile omap3-beagle-xm-ab.dtb; fi; " \ "if test $beaglerev = xMC; then " \ "setenv fdtfile omap3-beagle-xm.dtb; fi; " \ "if test $fdtfile = undefined; then " \ "echo WARNING: Could not determine device tree to use; fi; \0" \ + "validatefdt=" \ + "if test $beaglerev = xMAB; then " \ + "if test ! -e mmc ${bootpart} ${bootdir}/${fdtfile}; then " \ + "setenv fdtfile omap3-beagle-xm.dtb; " \ + "fi; " \ + "fi; \0" \ "bootenv=uEnv.txt\0" \ "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ "importbootenv=echo Importing environment from mmc ...; " \ @@ -190,7 +196,7 @@ "rootfstype=${ramrootfstype}\0" \ "loadramdisk=load mmc ${bootpart} ${rdaddr} ${bootdir}/${ramdisk}\0" \ "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ - "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ + "loadfdt=run validatefdt; load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ "mmcboot=echo Booting from mmc ...; " \ "run mmcargs; " \ "bootm ${loadaddr}\0" \ diff --git a/include/configs/pepper.h b/include/configs/pepper.h new file mode 100644 index 0000000..cc153ab --- /dev/null +++ b/include/configs/pepper.h @@ -0,0 +1,99 @@ +/* + * Copyright (C) 2013 Gumstix, Inc. - http://www.gumstix.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_PEPPER_H +#define __CONFIG_PEPPER_H + +#define CONFIG_MMC +#include <configs/ti_am335x_common.h> + +#undef CONFIG_BOARD_LATE_INIT +#undef CONFIG_SPL_OS_BOOT + +/* Clock defines */ +#define V_OSCK 24000000 /* Clock output from T2 */ +#define V_SCLK (V_OSCK) + +#undef CONFIG_SYS_PROMPT +#define CONFIG_SYS_PROMPT "pepper# " + +/* Mach type */ +#define MACH_TYPE_PEPPER 4207 /* Until the next sync */ +#define CONFIG_MACH_TYPE MACH_TYPE_PEPPER + +#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */ +#define CONFIG_ENV_IS_NOWHERE +/* Display cpuinfo */ +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_EXTRA_ENV_SETTINGS \ + DEFAULT_LINUX_BOOT_ENV \ + "bootdir=/boot\0" \ + "bootfile=zImage\0" \ + "fdtfile=am335x-pepper.dtb\0" \ + "console=ttyO0,115200n8\0" \ + "optargs=\0" \ + "mmcdev=0\0" \ + "mmcroot=/dev/mmcblk0p2 rw\0" \ + "mmcrootfstype=ext3 rootwait\0" \ + "mmcargs=setenv bootargs console=${console} " \ + "${optargs} " \ + "root=${mmcroot} " \ + "rootfstype=${mmcrootfstype}\0" \ + "bootenv=uEnv.txt\0" \ + "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ + "importbootenv=echo Importing environment from mmc ...; " \ + "env import -t ${loadaddr} ${filesize}\0" \ + "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \ + "load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \ + "loaduimage=fatload mmc ${mmcdev}:1 ${loadaddr} uImage\0" \ + "uimageboot=echo Booting from mmc${mmcdev} ...; " \ + "run mmcargs; " \ + "bootm ${loadaddr}\0" \ + "mmcboot=echo Booting from mmc ...; " \ + "run mmcargs; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" \ + "ubiboot=echo Booting from nand (ubifs) ...; " \ + "run ubiargs; run ubiload; " \ + "bootz ${loadaddr} - ${fdtaddr}\0" \ + +#define CONFIG_BOOTCOMMAND \ + "mmc dev ${mmcdev}; if mmc rescan; then " \ + "echo SD/MMC found on device ${mmcdev};" \ + "if run loadbootenv; then " \ + "echo Loaded environment from ${bootenv};" \ + "run importbootenv;" \ + "fi;" \ + "if test -n $uenvcmd; then " \ + "echo Running uenvcmd ...;" \ + "run uenvcmd;" \ + "fi;" \ + "if run mmcload; then " \ + "run mmcboot;" \ + "fi;" \ + "if run loaduimage; then " \ + "run uimageboot;" \ + "fi;" \ + "fi;" \ + +/* Serial console configuration */ +#define CONFIG_CONS_INDEX 1 /* UART0 */ +#define CONFIG_SERIAL1 1 +#define CONFIG_SYS_NS16550_COM1 0x44e09000 + +/* Ethernet support */ +#define CONFIG_PHY_GIGE +#define CONFIG_PHYLIB +#define CONFIG_PHY_ADDR 0 +#define CONFIG_PHY_MICREL +#define CONFIG_PHY_MICREL_KSZ9021 +#define CONFIG_PHY_RESET_DELAY 1000 + +/* SPL */ +#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds" + +#endif /* __CONFIG_PEPPER_H */ diff --git a/include/configs/pxm2.h b/include/configs/pxm2.h index 6276d43..d75d562 100644 --- a/include/configs/pxm2.h +++ b/include/configs/pxm2.h @@ -21,7 +21,7 @@ #include "siemens-am33x-common.h" #define CONFIG_SYS_MPUCLK 720 -#define DXR2_IOCTRL_VAL 0x18b +#define DDR_IOCTRL_VAL 0x18b #define DDR_PLL_FREQ 266 #define BOARD_DFU_BUTTON_GPIO 59 diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index 721c4e6..73a123d 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -358,7 +358,7 @@ #define CONFIG_COMMON_ENV_SETTINGS \ "verify=no \0" \ - "project_dir=systemone\0" \ + "project_dir=targetdir\0" \ "upgrade_available=0\0" \ "altbootcmd=run bootcmd\0" \ "bootlimit=3\0" \ @@ -402,7 +402,11 @@ "dfu_args=run bootargs_defaults;" \ "setenv bootargs ${bootargs} ;" \ "mtdparts default; " \ - "dfu 0 nand 0; \0" \ + "led dfu 1;" \ + "led stat 0;" \ + "dfu 0 nand 0;" \ + "led dfu 0;" \ + "led stat 1;\0" \ "dfu_alt_info=" DFU_ALT_INFO_NAND "\0" \ "net_args=run bootargs_defaults;" \ "mtdparts default;" \ diff --git a/include/palmas.h b/include/palmas.h index eaf3670..cca3f9a 100644 --- a/include/palmas.h +++ b/include/palmas.h @@ -24,6 +24,10 @@ #define LDO1_CTRL 0x50 #define LDO1_VOLTAGE 0x51 +/* LDO2 control/voltage */ +#define LDO2_CTRL 0x52 +#define LDO2_VOLTAGE 0x53 + /* LDO9 control/voltage */ #define LDO9_CTRL 0x60 #define LDO9_VOLTAGE 0x61 |