diff options
| -rw-r--r-- | arch/arm/cpu/armv7/mx6/ddr.c | 278 |
1 files changed, 137 insertions, 141 deletions
diff --git a/arch/arm/cpu/armv7/mx6/ddr.c b/arch/arm/cpu/armv7/mx6/ddr.c index 1ab69f6..5fc4d95 100644 --- a/arch/arm/cpu/armv7/mx6/ddr.c +++ b/arch/arm/cpu/armv7/mx6/ddr.c @@ -184,18 +184,18 @@ void mx6sdl_dram_iocfg(unsigned width, */ #define MR(val, ba, cmd, cs1) \ ((val << 16) | (1 << 15) | (cmd << 4) | (cs1 << 3) | ba) -void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i, - const struct mx6_mmdc_calibration *c, - const struct mx6_ddr3_cfg *m) +void mx6_dram_cfg(const struct mx6_ddr_sysinfo *sysinfo, + const struct mx6_mmdc_calibration *calib, + const struct mx6_ddr3_cfg *ddr3_cfg) { volatile struct mmdc_p_regs *mmdc0; volatile struct mmdc_p_regs *mmdc1; - u32 reg; + u32 val; u8 tcke, tcksrx, tcksre, txpdll, taofpd, taonpd, trrd; u8 todtlon, taxpd, tanpd, tcwl, txp, tfaw, tcl; u8 todt_idle_off = 0x4; /* from DDR3 Script Aid spreadsheet */ u16 trcd, trc, tras, twr, tmrd, trtp, trp, twtr, trfc, txs, txpr; - u16 CS0_END; + u16 cs0_end; u16 tdllk = 0x1ff; /* DLL locking time: 512 cycles (JEDEC DDR3) */ u8 coladdr; int clkper; /* clock period in picoseconds */ @@ -215,13 +215,12 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i, clock = 400; tcwl = 3; } - clkper = (1000*1000)/clock; /* ps */ + clkper = (1000 * 1000) / clock; /* pico seconds */ todtlon = tcwl; taxpd = tcwl; tanpd = tcwl; - tcwl = tcwl; - switch (m->density) { + switch (ddr3_cfg->density) { case 1: /* 1Gb per chip */ trfc = DIV_ROUND_UP(110000, clkper) - 1; txs = DIV_ROUND_UP(120000, clkper) - 1; @@ -240,80 +239,84 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i, break; default: /* invalid density */ - printf("invalid chip density\n"); + puts("invalid chip density\n"); hang(); break; } txpr = txs; - switch (m->mem_speed) { + switch (ddr3_cfg->mem_speed) { case 800: - txp = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1; - if (m->pagesz == 1) { + txp = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1; + tcke = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1; + if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(40000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1; + trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1; } else { tfaw = DIV_ROUND_UP(50000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1; + trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1; } break; case 1066: - txp = DIV_ROUND_UP(MAX(3*clkper, 7500), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3*clkper, 5625), clkper) - 1; - if (m->pagesz == 1) { + txp = DIV_ROUND_UP(MAX(3 * clkper, 7500), clkper) - 1; + tcke = DIV_ROUND_UP(MAX(3 * clkper, 5625), clkper) - 1; + if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(37500, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1; + trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1; } else { tfaw = DIV_ROUND_UP(50000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4*clkper, 10000), clkper) - 1; + trrd = DIV_ROUND_UP(MAX(4 * clkper, 10000), clkper) - 1; } break; case 1333: - txp = DIV_ROUND_UP(MAX(3*clkper, 6000), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3*clkper, 5625), clkper) - 1; - if (m->pagesz == 1) { + txp = DIV_ROUND_UP(MAX(3 * clkper, 6000), clkper) - 1; + tcke = DIV_ROUND_UP(MAX(3 * clkper, 5625), clkper) - 1; + if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(30000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4*clkper, 6000), clkper) - 1; + trrd = DIV_ROUND_UP(MAX(4 * clkper, 6000), clkper) - 1; } else { tfaw = DIV_ROUND_UP(45000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1; + trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1; } break; case 1600: - txp = DIV_ROUND_UP(MAX(3*clkper, 6000), clkper) - 1; - tcke = DIV_ROUND_UP(MAX(3*clkper, 5000), clkper) - 1; - if (m->pagesz == 1) { + txp = DIV_ROUND_UP(MAX(3 * clkper, 6000), clkper) - 1; + tcke = DIV_ROUND_UP(MAX(3 * clkper, 5000), clkper) - 1; + if (ddr3_cfg->pagesz == 1) { tfaw = DIV_ROUND_UP(30000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4*clkper, 6000), clkper) - 1; + trrd = DIV_ROUND_UP(MAX(4 * clkper, 6000), clkper) - 1; } else { tfaw = DIV_ROUND_UP(40000, clkper) - 1; - trrd = DIV_ROUND_UP(MAX(4*clkper, 7500), clkper) - 1; + trrd = DIV_ROUND_UP(MAX(4 * clkper, 7500), clkper) - 1; } break; default: - printf("invalid memory speed\n"); + puts("invalid memory speed\n"); hang(); break; } - txpdll = DIV_ROUND_UP(MAX(10*clkper, 24000), clkper) - 1; - tcl = DIV_ROUND_UP(m->trcd, clkper/10) - 3; - tcksre = DIV_ROUND_UP(MAX(5*clkper, 10000), clkper); - tcksrx = tcksre; + txpdll = DIV_ROUND_UP(MAX(10 * clkper, 24000), clkper) - 1; + tcksre = DIV_ROUND_UP(MAX(5 * clkper, 10000), clkper); taonpd = DIV_ROUND_UP(2000, clkper) - 1; + tcksrx = tcksre; taofpd = taonpd; - trp = DIV_ROUND_UP(m->trcd, clkper/10) - 1; + twr = DIV_ROUND_UP(15000, clkper) - 1; + tmrd = DIV_ROUND_UP(MAX(12 * clkper, 15000), clkper) - 1; + trc = DIV_ROUND_UP(ddr3_cfg->trcmin, clkper / 10) - 1; + tras = DIV_ROUND_UP(ddr3_cfg->trasmin, clkper / 10) - 1; + tcl = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 3; + trp = DIV_ROUND_UP(ddr3_cfg->trcd, clkper / 10) - 1; + twtr = ROUND(MAX(4 * clkper, 7500) / clkper, 1) - 1; trcd = trp; - trc = DIV_ROUND_UP(m->trcmin, clkper/10) - 1; - tras = DIV_ROUND_UP(m->trasmin, clkper/10) - 1; - twr = DIV_ROUND_UP(15000, clkper) - 1; - tmrd = DIV_ROUND_UP(MAX(12*clkper, 15000), clkper) - 1; - twtr = ROUND(MAX(4*clkper, 7500)/clkper, 1) - 1; trtp = twtr; - CS0_END = ((4*i->cs_density) <= 120) ? (4*i->cs_density)+7 : 127; - debug("density:%d Gb (%d Gb per chip)\n", i->cs_density, m->density); + cs0_end = (4 * sysinfo->cs_density <= 120) ? + 4 * sysinfo->cs_density + 7 : + 127; + + debug("density:%d Gb (%d Gb per chip)\n", + sysinfo->cs_density, ddr3_cfg->density); debug("clock: %dMHz (%d ps)\n", clock, clkper); - debug("memspd:%d\n", m->mem_speed); + debug("memspd:%d\n", ddr3_cfg->mem_speed); debug("tcke=%d\n", tcke); debug("tcksrx=%d\n", tcksrx); debug("tcksre=%d\n", tcksre); @@ -340,11 +343,11 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i, debug("twtr=%d\n", twtr); debug("trrd=%d\n", trrd); debug("txpr=%d\n", txpr); - debug("CS0_END=%d\n", CS0_END); - debug("ncs=%d\n", i->ncs); - debug("Rtt_wr=%d\n", i->rtt_wr); - debug("Rtt_nom=%d\n", i->rtt_nom); - debug("SRT=%d\n", m->SRT); + debug("cs0_end=%d\n", cs0_end); + debug("ncs=%d\n", sysinfo->ncs); + debug("Rtt_wr=%d\n", sysinfo->rtt_wr); + debug("Rtt_nom=%d\n", sysinfo->rtt_nom); + debug("SRT=%d\n", ddr3_cfg->SRT); debug("tcl=%d\n", tcl); debug("twr=%d\n", twr); @@ -354,142 +357,135 @@ void mx6_dram_cfg(const struct mx6_ddr_sysinfo *i, * see: * appnote, ddr3 spreadsheet */ - mmdc0->mpwldectrl0 = c->p0_mpwldectrl0; - mmdc0->mpwldectrl1 = c->p0_mpwldectrl1; - mmdc0->mpdgctrl0 = c->p0_mpdgctrl0; - mmdc0->mpdgctrl1 = c->p0_mpdgctrl1; - mmdc0->mprddlctl = c->p0_mprddlctl; - mmdc0->mpwrdlctl = c->p0_mpwrdlctl; - if (i->dsize > 1) { - mmdc1->mpwldectrl0 = c->p1_mpwldectrl0; - mmdc1->mpwldectrl1 = c->p1_mpwldectrl1; - mmdc1->mpdgctrl0 = c->p1_mpdgctrl0; - mmdc1->mpdgctrl1 = c->p1_mpdgctrl1; - mmdc1->mprddlctl = c->p1_mprddlctl; - mmdc1->mpwrdlctl = c->p1_mpwrdlctl; + mmdc0->mpwldectrl0 = calib->p0_mpwldectrl0; + mmdc0->mpwldectrl1 = calib->p0_mpwldectrl1; + mmdc0->mpdgctrl0 = calib->p0_mpdgctrl0; + mmdc0->mpdgctrl1 = calib->p0_mpdgctrl1; + mmdc0->mprddlctl = calib->p0_mprddlctl; + mmdc0->mpwrdlctl = calib->p0_mpwrdlctl; + if (sysinfo->dsize > 1) { + mmdc1->mpwldectrl0 = calib->p1_mpwldectrl0; + mmdc1->mpwldectrl1 = calib->p1_mpwldectrl1; + mmdc1->mpdgctrl0 = calib->p1_mpdgctrl0; + mmdc1->mpdgctrl1 = calib->p1_mpdgctrl1; + mmdc1->mprddlctl = calib->p1_mprddlctl; + mmdc1->mpwrdlctl = calib->p1_mpwrdlctl; } /* Read data DQ Byte0-3 delay */ - mmdc0->mprddqby0dl = (u32)0x33333333; - mmdc0->mprddqby1dl = (u32)0x33333333; - if (i->dsize > 0) { - mmdc0->mprddqby2dl = (u32)0x33333333; - mmdc0->mprddqby3dl = (u32)0x33333333; + mmdc0->mprddqby0dl = 0x33333333; + mmdc0->mprddqby1dl = 0x33333333; + if (sysinfo->dsize > 0) { + mmdc0->mprddqby2dl = 0x33333333; + mmdc0->mprddqby3dl = 0x33333333; } - if (i->dsize > 1) { - mmdc1->mprddqby0dl = (u32)0x33333333; - mmdc1->mprddqby1dl = (u32)0x33333333; - mmdc1->mprddqby2dl = (u32)0x33333333; - mmdc1->mprddqby3dl = (u32)0x33333333; + + if (sysinfo->dsize > 1) { + mmdc1->mprddqby0dl = 0x33333333; + mmdc1->mprddqby1dl = 0x33333333; + mmdc1->mprddqby2dl = 0x33333333; + mmdc1->mprddqby3dl = 0x33333333; } /* MMDC Termination: rtt_nom:2 RZQ/2(120ohm), rtt_nom:1 RZQ/4(60ohm) */ - reg = (i->rtt_nom == 2) ? 0x00011117 : 0x00022227; - mmdc0->mpodtctrl = reg; - if (i->dsize > 1) - mmdc1->mpodtctrl = reg; + val = (sysinfo->rtt_nom == 2) ? 0x00011117 : 0x00022227; + mmdc0->mpodtctrl = val; + if (sysinfo->dsize > 1) + mmdc1->mpodtctrl = val; /* complete calibration */ - reg = (1 << 11); /* Force measurement on delay-lines */ - mmdc0->mpmur0 = reg; - if (i->dsize > 1) - mmdc1->mpmur0 = reg; + val = (1 << 11); /* Force measurement on delay-lines */ + mmdc0->mpmur0 = val; + if (sysinfo->dsize > 1) + mmdc1->mpmur0 = val; /* Step 1: configuration request */ mmdc0->mdscr = (u32)(1 << 15); /* config request */ /* Step 2: Timing configuration */ - reg = (trfc << 24) | (txs << 16) | (txp << 13) | (txpdll << 9) | - (tfaw << 4) | tcl; - mmdc0->mdcfg0 = reg; - reg = (trcd << 29) | (trp << 26) | (trc << 21) | (tras << 16) | - (1 << 15) | /* trpa */ - (twr << 9) | (tmrd << 5) | tcwl; - mmdc0->mdcfg1 = reg; - reg = (tdllk << 16) | (trtp << 6) | (twtr << 3) | trrd; - mmdc0->mdcfg2 = reg; - reg = (taofpd << 27) | (taonpd << 24) | (tanpd << 20) | (taxpd << 16) | - (todtlon << 12) | (todt_idle_off << 4); - mmdc0->mdotc = reg; - mmdc0->mdasp = CS0_END; /* CS addressing */ + mmdc0->mdcfg0 = (trfc << 24) | (txs << 16) | (txp << 13) | + (txpdll << 9) | (tfaw << 4) | tcl; + mmdc0->mdcfg1 = (trcd << 29) | (trp << 26) | (trc << 21) | + (tras << 16) | (1 << 15) /* trpa */ | + (twr << 9) | (tmrd << 5) | tcwl; + mmdc0->mdcfg2 = (tdllk << 16) | (trtp << 6) | (twtr << 3) | trrd; + mmdc0->mdotc = (taofpd << 27) | (taonpd << 24) | (tanpd << 20) | + (taxpd << 16) | (todtlon << 12) | (todt_idle_off << 4); + mmdc0->mdasp = cs0_end; /* CS addressing */ /* Step 3: Configure DDR type */ - reg = (i->cs1_mirror << 19) | (i->walat << 16) | (i->bi_on << 12) | - (i->mif3_mode << 9) | (i->ralat << 6); - mmdc0->mdmisc = reg; + mmdc0->mdmisc = (sysinfo->cs1_mirror << 19) | (sysinfo->walat << 16) | + (sysinfo->bi_on << 12) | (sysinfo->mif3_mode << 9) | + (sysinfo->ralat << 6); /* Step 4: Configure delay while leaving reset */ - reg = (txpr << 16) | (i->sde_to_rst << 8) | (i->rst_to_cke << 0); - mmdc0->mdor = reg; + mmdc0->mdor = (txpr << 16) | (sysinfo->sde_to_rst << 8) | + (sysinfo->rst_to_cke << 0); /* Step 5: Configure DDR physical parameters (density and burst len) */ - coladdr = m->coladdr; - if (m->coladdr == 8) /* 8-bit COL is 0x3 */ + coladdr = ddr3_cfg->coladdr; + if (ddr3_cfg->coladdr == 8) /* 8-bit COL is 0x3 */ coladdr += 4; - else if (m->coladdr == 12) /* 12-bit COL is 0x4 */ + else if (ddr3_cfg->coladdr == 12) /* 12-bit COL is 0x4 */ coladdr += 1; - reg = (m->rowaddr - 11) << 24 | /* ROW */ - (coladdr - 9) << 20 | /* COL */ - (1 << 19) | /* Burst Length = 8 for DDR3 */ - (i->dsize << 16); /* DDR data bus size */ - mmdc0->mdctl = reg; + mmdc0->mdctl = (ddr3_cfg->rowaddr - 11) << 24 | /* ROW */ + (coladdr - 9) << 20 | /* COL */ + (1 << 19) | /* Burst Length = 8 for DDR3 */ + (sysinfo->dsize << 16); /* DDR data bus size */ /* Step 6: Perform ZQ calibration */ - reg = (u32)0xa1390001; /* one-time HW ZQ calib */ - mmdc0->mpzqhwctrl = reg; - if (i->dsize > 1) - mmdc1->mpzqhwctrl = reg; + val = 0xa1390001; /* one-time HW ZQ calib */ + mmdc0->mpzqhwctrl = val; + if (sysinfo->dsize > 1) + mmdc1->mpzqhwctrl = val; /* Step 7: Enable MMDC with desired chip select */ - reg = mmdc0->mdctl | - (1 << 31) | /* SDE_0 for CS0 */ - ((i->ncs == 2) ? 1 : 0) << 30; /* SDE_1 for CS1 */ - mmdc0->mdctl = reg; + mmdc0->mdctl |= (1 << 31) | /* SDE_0 for CS0 */ + ((sysinfo->ncs == 2) ? 1 : 0) << 30; /* SDE_1 for CS1 */ /* Step 8: Write Mode Registers to Init DDR3 devices */ - for (cs = 0; cs < i->ncs; cs++) { + for (cs = 0; cs < sysinfo->ncs; cs++) { /* MR2 */ - reg = (i->rtt_wr & 3) << 9 | (m->SRT & 1) << 7 | + val = (sysinfo->rtt_wr & 3) << 9 | (ddr3_cfg->SRT & 1) << 7 | ((tcwl - 3) & 3) << 3; - mmdc0->mdscr = (u32)MR(reg, 2, 3, cs); + mmdc0->mdscr = MR(val, 2, 3, cs); /* MR3 */ - mmdc0->mdscr = (u32)MR(0, 3, 3, cs); + mmdc0->mdscr = MR(0, 3, 3, cs); /* MR1 */ - reg = ((i->rtt_nom & 1) ? 1 : 0) << 2 | - ((i->rtt_nom & 2) ? 1 : 0) << 6; - mmdc0->mdscr = (u32)MR(reg, 1, 3, cs); - reg = ((tcl - 1) << 4) | /* CAS */ + val = ((sysinfo->rtt_nom & 1) ? 1 : 0) << 2 | + ((sysinfo->rtt_nom & 2) ? 1 : 0) << 6; + mmdc0->mdscr = MR(val, 1, 3, cs); + /* MR0 */ + val = ((tcl - 1) << 4) | /* CAS */ (1 << 8) | /* DLL Reset */ ((twr - 3) << 9); /* Write Recovery */ - /* MR0 */ - mmdc0->mdscr = (u32)MR(reg, 0, 3, cs); + mmdc0->mdscr = MR(val, 0, 3, cs); /* ZQ calibration */ - reg = (1 << 10); - mmdc0->mdscr = (u32)MR(reg, 0, 4, cs); + val = (1 << 10); + mmdc0->mdscr = MR(val, 0, 4, cs); } /* Step 10: Power down control and self-refresh */ - reg = (tcke & 0x7) << 16 | - 5 << 12 | /* PWDT_1: 256 cycles */ - 5 << 8 | /* PWDT_0: 256 cycles */ - 1 << 6 | /* BOTH_CS_PD */ - (tcksrx & 0x7) << 3 | - (tcksre & 0x7); - mmdc0->mdpdc = reg; - mmdc0->mapsr = (u32)0x00011006; /* ADOPT power down enabled */ + mmdc0->mdpdc = (tcke & 0x7) << 16 | + 5 << 12 | /* PWDT_1: 256 cycles */ + 5 << 8 | /* PWDT_0: 256 cycles */ + 1 << 6 | /* BOTH_CS_PD */ + (tcksrx & 0x7) << 3 | + (tcksre & 0x7); + mmdc0->mapsr = 0x00011006; /* ADOPT power down enabled */ /* Step 11: Configure ZQ calibration: one-time and periodic 1ms */ - mmdc0->mpzqhwctrl = (u32)0xa1390003; - if (i->dsize > 1) - mmdc1->mpzqhwctrl = (u32)0xa1390003; + val = 0xa1390003; + mmdc0->mpzqhwctrl = val; + if (sysinfo->dsize > 1) + mmdc1->mpzqhwctrl = val; /* Step 12: Configure and activate periodic refresh */ - reg = (1 << 14) | /* REF_SEL: Periodic refresh cycles of 32kHz */ - (7 << 11); /* REFR: Refresh Rate - 8 refreshes */ - mmdc0->mdref = reg; + mmdc0->mdref = (1 << 14) | /* REF_SEL: Periodic refresh cycle: 32kHz */ + (7 << 11); /* REFR: Refresh Rate - 8 refreshes */ /* Step 13: Deassert config request - init complete */ - mmdc0->mdscr = (u32)0x00000000; + mmdc0->mdscr = 0x00000000; /* wait for auto-ZQ calibration to complete */ mdelay(1); |