diff options
-rw-r--r-- | arch/arm/Kconfig | 1 | ||||
-rw-r--r-- | board/siemens/taurus/taurus.c | 82 | ||||
-rw-r--r-- | configs/taurus_defconfig | 5 | ||||
-rw-r--r-- | include/configs/taurus.h | 52 |
4 files changed, 127 insertions, 13 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index bd073eb..ffc89e7 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -207,6 +207,7 @@ config TARGET_CORVUS select CPU_ARM926EJS config TARGET_TAURUS + select SUPPORT_SPL bool "Support taurus" select CPU_ARM926EJS diff --git a/board/siemens/taurus/taurus.c b/board/siemens/taurus/taurus.c index 76609c7..b8ff478 100644 --- a/board/siemens/taurus/taurus.c +++ b/board/siemens/taurus/taurus.c @@ -21,6 +21,8 @@ #include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> #include <asm/arch/at91sam9_sdramc.h> +#include <asm/arch/clk.h> +#include <linux/mtd/nand.h> #include <atmel_mci.h> #include <asm/arch/at91_spi.h> #include <spi.h> @@ -30,7 +32,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_CMD_NAND static void taurus_nand_hw_init(void) { struct at91_smc *smc = (struct at91_smc *)ATMEL_BASE_SMC; @@ -63,15 +64,77 @@ static void taurus_nand_hw_init(void) /* Enable NandFlash */ at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } + +#if defined(CONFIG_SPL_BUILD) +#include <spl.h> +#include <nand.h> + +void matrix_init(void) +{ + struct at91_matrix *mat = (struct at91_matrix *)ATMEL_BASE_MATRIX; + + writel((readl(&mat->scfg[3]) & (~AT91_MATRIX_SLOT_CYCLE)) + | AT91_MATRIX_SLOT_CYCLE_(0x40), + &mat->scfg[3]); +} + +void at91_spl_board_init(void) +{ + taurus_nand_hw_init(); + + /* Configure recovery button PINs */ + at91_set_gpio_input(AT91_PIN_PA31, 1); + + /* check if button is pressed */ + if (at91_get_gpio_value(AT91_PIN_PA31) == 0) { + u32 boot_device; + + debug("Recovery button pressed\n"); + boot_device = spl_boot_device(); + switch (boot_device) { +#ifdef CONFIG_SPL_NAND_SUPPORT + case BOOT_DEVICE_NAND: + nand_init(); + spl_nand_erase_one(0, 0); + break; +#endif + } + } +} + +void mem_init(void) +{ + struct at91_matrix *ma = (struct at91_matrix *)ATMEL_BASE_MATRIX; + struct sdramc_reg setting; + + at91_sdram_hw_init(); + setting.cr = (AT91_SDRAMC_NC_9 | + AT91_SDRAMC_NR_13 | + AT91_SDRAMC_CAS_3 | + AT91_SDRAMC_NB_4 | + AT91_SDRAMC_DBW_32 | + AT91_SDRAMC_TWR_VAL(3) | + AT91_SDRAMC_TRC_VAL(9) | + AT91_SDRAMC_TRP_VAL(3) | + AT91_SDRAMC_TRCD_VAL(3) | + AT91_SDRAMC_TRAS_VAL(6) | + AT91_SDRAMC_TXSR_VAL(10)); + setting.mdr = AT91_SDRAMC_MD_SDRAM; + setting.tr = (CONFIG_SYS_MASTER_CLOCK * 7) / 1000000; + + + writel(readl(&ma->ebicsa) | AT91_MATRIX_CS1A_SDRAMC | + AT91_MATRIX_VDDIOMSEL_3_3V | AT91_MATRIX_EBI_IOSR_SEL, + &ma->ebicsa); + sdramc_initialize(ATMEL_BASE_CS1, &setting); +} #endif #ifdef CONFIG_MACB static void taurus_macb_hw_init(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - /* Enable EMAC clock */ - writel(1 << ATMEL_ID_EMAC0, &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_EMAC0); /* * Disable pull-up on: @@ -119,12 +182,12 @@ int board_mmc_init(bd_t *bd) int board_early_init_f(void) { - struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - /* Enable clocks for all PIOs */ - writel((1 << ATMEL_ID_PIOA) | (1 << ATMEL_ID_PIOB) | - (1 << ATMEL_ID_PIOC), - &pmc->pcer); + at91_periph_clk_enable(ATMEL_ID_PIOA); + at91_periph_clk_enable(ATMEL_ID_PIOB); + at91_periph_clk_enable(ATMEL_ID_PIOC); + + at91_seriald_hw_init(); return 0; } @@ -149,7 +212,6 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - at91_seriald_hw_init(); #ifdef CONFIG_CMD_NAND taurus_nand_hw_init(); #endif diff --git a/configs/taurus_defconfig b/configs/taurus_defconfig index 9870048..438e25d 100644 --- a/configs/taurus_defconfig +++ b/configs/taurus_defconfig @@ -1,3 +1,4 @@ +CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067,BOARD_TAURUS" -CONFIG_ARM=y -CONFIG_TARGET_TAURUS=y ++S:CONFIG_ARM=y ++S:CONFIG_TARGET_TAURUS=y diff --git a/include/configs/taurus.h b/include/configs/taurus.h index ba9496f..20194ae 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -34,7 +34,7 @@ */ -#define CONFIG_SYS_TEXT_BASE 0x23f00000 +#define CONFIG_SYS_TEXT_BASE 0x21000000 /* ARM asynchronous clock */ #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ @@ -168,4 +168,54 @@ #define CONFIG_SYS_MALLOC_LEN \ ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x0 +#define CONFIG_SPL_MAX_SIZE (11 * 1024) +#define CONFIG_SPL_STACK (16 * 1024) + +#define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE +#define CONFIG_SPL_BSS_MAX_SIZE (3 * 1024) + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SYS_NAND_ENABLE_PIN_SPL (2*32 + 14) +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SYS_USE_NANDFLASH 1 +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SPL_NAND_RAW_ONLY +#define CONFIG_SPL_NAND_SOFTECC +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_NAND_5_ADDR_CYCLE + +#define CONFIG_SYS_NAND_SIZE (256*1024*1024) +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCSIZE 256 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ + 48, 49, 50, 51, 52, 53, 54, 55, \ + 56, 57, 58, 59, 60, 61, 62, 63, } + + +#define CONFIG_SPL_ATMEL_SIZE +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define AT91_PLL_LOCK_TIMEOUT 1000000 +#define CONFIG_SYS_AT91_PLLA 0x202A3F01 +#define CONFIG_SYS_MCKR 0x1300 +#define CONFIG_SYS_MCKR_CSS (0x02 | CONFIG_SYS_MCKR) +#define CONFIG_SYS_AT91_PLLB 0x10193F05 #endif |