summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/powerpc/cpu/mpc85xx/ddr-gen3.c13
-rw-r--r--arch/powerpc/cpu/mpc85xx/p2041_ids.c6
-rw-r--r--arch/powerpc/cpu/mpc85xx/p3041_ids.c8
-rw-r--r--arch/powerpc/cpu/mpc85xx/p4080_ids.c6
-rw-r--r--arch/powerpc/cpu/mpc85xx/p5020_ids.c8
-rw-r--r--arch/powerpc/cpu/mpc8xxx/ddr/main.c2
-rw-r--r--arch/powerpc/include/asm/fsl_lbc.h6
-rw-r--r--arch/powerpc/include/asm/processor.h2
-rw-r--r--board/freescale/common/sgmii_riser.c57
-rw-r--r--board/freescale/p1022ds/diu.c82
-rw-r--r--board/freescale/p1022ds/p1022ds.c4
-rw-r--r--board/freescale/p1022ds/tlb.c14
-rw-r--r--board/freescale/p2041rdb/eth.c39
-rw-r--r--boards.cfg4
-rw-r--r--include/configs/MPC8536DS.h9
-rw-r--r--include/configs/MPC8548CDS.h3
-rw-r--r--include/configs/MPC8572DS.h9
-rw-r--r--include/configs/P1022DS.h53
-rw-r--r--include/configs/P2020DS.h9
-rw-r--r--include/configs/P2041RDB.h5
-rw-r--r--include/configs/corenet_ds.h4
-rw-r--r--include/configs/p1_p2_rdb_pc.h4
22 files changed, 285 insertions, 62 deletions
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index 18e9cc5..81961de 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -50,7 +50,10 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
csn = i;
csn_bnds_backup = regs->cs[i].bnds;
csn_bnds_t = (unsigned int *) &regs->cs[i].bnds;
- *csn_bnds_t = regs->cs[i].bnds ^ 0x0F000F00;
+ if (cs_ea > 0xeff)
+ *csn_bnds_t = regs->cs[i].bnds + 0x01000000;
+ else
+ *csn_bnds_t = regs->cs[i].bnds + 0x01000100;
debug("Found cs%d_bns (0x%08x) covering 0xff000000, "
"change it to 0x%x\n",
csn, csn_bnds_backup, regs->cs[i].bnds);
@@ -310,9 +313,15 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
/* 7. Wait for 400ms/GB */
total_gb_size_per_controller = 0;
for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
- total_gb_size_per_controller +=
+ if (i == csn) {
+ total_gb_size_per_controller +=
+ ((csn_bnds_backup & 0xFFFF) >> 6)
+ - (csn_bnds_backup >> 22) + 1;
+ } else {
+ total_gb_size_per_controller +=
((regs->cs[i].bnds & 0xFFFF) >> 6)
- (regs->cs[i].bnds >> 22) + 1;
+ }
}
if (in_be32(&ddr->sdram_cfg) & 0x80000)
total_gb_size_per_controller <<= 1;
diff --git a/arch/powerpc/cpu/mpc85xx/p2041_ids.c b/arch/powerpc/cpu/mpc85xx/p2041_ids.c
index b99b54d..91d9cac 100644
--- a/arch/powerpc/cpu/mpc85xx/p2041_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/p2041_ids.c
@@ -62,9 +62,9 @@ struct liodn_id_table liodn_tbl[] = {
SET_SATA_LIODN(1, 127),
SET_SATA_LIODN(2, 128),
- SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 193),
- SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 2, 194),
- SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 3, 195),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 193),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 194),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 195),
SET_DMA_LIODN(1, 197),
SET_DMA_LIODN(2, 198),
diff --git a/arch/powerpc/cpu/mpc85xx/p3041_ids.c b/arch/powerpc/cpu/mpc85xx/p3041_ids.c
index c50b442..e46a714 100644
--- a/arch/powerpc/cpu/mpc85xx/p3041_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/p3041_ids.c
@@ -62,10 +62,10 @@ struct liodn_id_table liodn_tbl[] = {
SET_SATA_LIODN(1, 127),
SET_SATA_LIODN(2, 128),
- SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 193),
- SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 2, 194),
- SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 3, 195),
- SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 4, 196),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 193),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 194),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 195),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 196),
SET_DMA_LIODN(1, 197),
SET_DMA_LIODN(2, 198),
diff --git a/arch/powerpc/cpu/mpc85xx/p4080_ids.c b/arch/powerpc/cpu/mpc85xx/p4080_ids.c
index a6ea6af..5c287fb 100644
--- a/arch/powerpc/cpu/mpc85xx/p4080_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/p4080_ids.c
@@ -52,9 +52,9 @@ struct liodn_id_table liodn_tbl[] = {
SET_SDHC_LIODN(1, 156),
- SET_PCI_LIODN("fsl,p4080-pcie", 1, 193),
- SET_PCI_LIODN("fsl,p4080-pcie", 2, 194),
- SET_PCI_LIODN("fsl,p4080-pcie", 3, 195),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 193),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 194),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 195),
SET_DMA_LIODN(1, 196),
SET_DMA_LIODN(2, 197),
diff --git a/arch/powerpc/cpu/mpc85xx/p5020_ids.c b/arch/powerpc/cpu/mpc85xx/p5020_ids.c
index ff57a19..e8c26bf 100644
--- a/arch/powerpc/cpu/mpc85xx/p5020_ids.c
+++ b/arch/powerpc/cpu/mpc85xx/p5020_ids.c
@@ -62,10 +62,10 @@ struct liodn_id_table liodn_tbl[] = {
SET_SATA_LIODN(1, 127),
SET_SATA_LIODN(2, 128),
- SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 1, 193),
- SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 2, 194),
- SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 3, 195),
- SET_PCI_LIODN("fsl,qoriq-pcie-v2.2", 4, 196),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 193),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 194),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 195),
+ SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 196),
SET_DMA_LIODN(1, 197),
SET_DMA_LIODN(2, 198),
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index f52ad9f..c2a03e3 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -366,7 +366,7 @@ fsl_ddr_compute(fsl_ddr_info_t *pinfo, unsigned int start_step,
}
}
-#else
+#elif defined(CONFIG_SYS_DDR_RAW_TIMING)
case STEP_COMPUTE_DIMM_PARMS:
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
for (j = 0; j < CONFIG_DIMM_SLOTS_PER_CTLR; j++) {
diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h
index 2a23d84..d1def75 100644
--- a/arch/powerpc/include/asm/fsl_lbc.h
+++ b/arch/powerpc/include/asm/fsl_lbc.h
@@ -82,10 +82,10 @@ void lbc_sdram_init(void);
/* Convert an address into the right format for the BR registers */
#if defined(CONFIG_PHYS_64BIT) && !defined(CONFIG_FSL_ELBC)
-#define BR_PHYS_ADDR(x) ((unsigned long)((x & 0x0ffff8000ULL) | \
- ((x & 0x300000000ULL) >> 19)))
+#define BR_PHYS_ADDR(x) \
+ ((u32)(((x) & 0x0ffff8000ULL) | (((x) & 0x300000000ULL) >> 19)))
#else
-#define BR_PHYS_ADDR(x) (x & 0xffff8000)
+#define BR_PHYS_ADDR(x) ((u32)(x) & 0xffff8000)
#endif
/* OR - Option Registers
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 4eb88e9..dc009d6 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1100,9 +1100,7 @@
#define SVR_8641D 0x809001
#define SVR_9130 0x860001
-#define SVR_9130_E 0x860801
#define SVR_9131 0x860000
-#define SVR_9131_E 0x860800
#define SVR_Unknown 0xFFFFFF
diff --git a/board/freescale/common/sgmii_riser.c b/board/freescale/common/sgmii_riser.c
index 4f40a1d..5c3c593 100644
--- a/board/freescale/common/sgmii_riser.c
+++ b/board/freescale/common/sgmii_riser.c
@@ -17,6 +17,7 @@
#include <net.h>
#include <libfdt.h>
#include <tsec.h>
+#include <fdt_support.h>
void fsl_sgmii_riser_init(struct tsec_info_struct *tsec_info, int num)
{
@@ -31,6 +32,7 @@ void fsl_sgmii_riser_fdt_fixup(void *fdt)
{
struct eth_device *dev;
int node;
+ int mdio_node;
int i = -1;
int etsec_num = 0;
@@ -40,16 +42,38 @@ void fsl_sgmii_riser_fdt_fixup(void *fdt)
while ((dev = eth_get_dev_by_index(++i)) != NULL) {
struct tsec_private *priv;
+ int phy_node;
int enet_node;
+ uint32_t ph;
+ char sgmii_phy[16];
char enet[16];
const u32 *phyh;
- int phynode;
const char *model;
const char *path;
if (!strstr(dev->name, "eTSEC"))
continue;
+ priv = dev->priv;
+ if (!(priv->flags & TSEC_SGMII)) {
+ etsec_num++;
+ continue;
+ }
+
+ mdio_node = fdt_node_offset_by_compatible(fdt, -1,
+ "fsl,gianfar-mdio");
+ if (mdio_node < 0)
+ return;
+
+ sprintf(sgmii_phy, "sgmii-phy@%d", etsec_num);
+ phy_node = fdt_subnode_offset(fdt, mdio_node, sgmii_phy);
+ if (phy_node > 0) {
+ fdt_increase_size(fdt, 32);
+ ph = fdt_create_phandle(fdt, phy_node);
+ if (!ph)
+ continue;
+ }
+
sprintf(enet, "ethernet%d", etsec_num++);
path = fdt_getprop(fdt, node, enet, NULL);
if (!path) {
@@ -74,15 +98,32 @@ void fsl_sgmii_riser_fdt_fixup(void *fdt)
if (!strstr(model, "TSEC"))
continue;
- phyh = fdt_getprop(fdt, enet_node, "phy-handle", NULL);
- if (!phyh)
- continue;
+ if (phy_node < 0) {
+ /*
+ * This part is only for old device tree without
+ * sgmii_phy nodes. It's kept just for compatible
+ * reason. Soon to be deprecated if all device tree
+ * get updated.
+ */
+ phyh = fdt_getprop(fdt, enet_node, "phy-handle", NULL);
+ if (!phyh)
+ continue;
- phynode = fdt_node_offset_by_phandle(fdt, fdt32_to_cpu(*phyh));
+ phy_node = fdt_node_offset_by_phandle(fdt,
+ fdt32_to_cpu(*phyh));
- priv = dev->priv;
+ priv = dev->priv;
- if (priv->flags & TSEC_SGMII)
- fdt_setprop_cell(fdt, phynode, "reg", priv->phyaddr);
+ if (priv->flags & TSEC_SGMII)
+ fdt_setprop_cell(fdt, phy_node, "reg",
+ priv->phyaddr);
+ } else {
+ fdt_setprop(fdt, enet_node, "phy-handle", &ph,
+ sizeof(ph));
+ fdt_setprop_string(fdt, enet_node,
+ "phy-connection-type",
+ phy_string_for_interface(
+ PHY_INTERFACE_MODE_SGMII));
+ }
}
}
diff --git a/board/freescale/p1022ds/diu.c b/board/freescale/p1022ds/diu.c
index d5428ea..898f4c7 100644
--- a/board/freescale/p1022ds/diu.c
+++ b/board/freescale/p1022ds/diu.c
@@ -63,6 +63,8 @@ static u8 px_brdcfg0;
static u32 pmuxcr;
static void *lbc_lcs0_ba;
static void *lbc_lcs1_ba;
+static u32 old_br0, old_or0, old_br1, old_or1;
+static u32 new_br0, new_or0, new_br1, new_or1;
void diu_set_pixel_clock(unsigned int pixclock)
{
@@ -88,10 +90,63 @@ int platform_diu_init(unsigned int xres, unsigned int yres, const char *port)
const char *name;
u32 pixel_format;
u8 temp;
+ phys_addr_t phys0, phys1; /* BR0/BR1 physical addresses */
- /* Save the LBC LCS0 and LCS1 addresses for the DIU mux functions */
- lbc_lcs0_ba = (void *)(get_lbc_br(0) & get_lbc_or(0) & 0xFFFF8000);
- lbc_lcs1_ba = (void *)(get_lbc_br(1) & get_lbc_or(1) & 0xFFFF8000);
+ /*
+ * Indirect mode requires both BR0 and BR1 to be set to "GPCM",
+ * otherwise writes to these addresses won't actually appear on the
+ * local bus, and so the PIXIS won't see them.
+ *
+ * In FCM mode, writes go to the NAND controller, which does not pass
+ * them to the localbus directly. So we force BR0 and BR1 into GPCM
+ * mode, since we don't care about what's behind the localbus any
+ * more. However, we save those registers first, so that we can
+ * restore them when necessary.
+ */
+ new_br0 = old_br0 = get_lbc_br(0);
+ new_br1 = old_br1 = get_lbc_br(1);
+ new_or0 = old_or0 = get_lbc_or(0);
+ new_or1 = old_or1 = get_lbc_or(1);
+
+ /*
+ * Use the existing BRx/ORx values if it's already GPCM. Otherwise,
+ * force the values to simple 32KB GPCM windows with the most
+ * conservative timing.
+ */
+ if ((old_br0 & BR_MSEL) != BR_MS_GPCM) {
+ new_br0 = (get_lbc_br(0) & BR_BA) | BR_V;
+ new_or0 = OR_AM_32KB | 0xFF7;
+ set_lbc_br(0, new_br0);
+ set_lbc_or(0, new_or0);
+ }
+ if ((old_br1 & BR_MSEL) != BR_MS_GPCM) {
+ new_br1 = (get_lbc_br(1) & BR_BA) | BR_V;
+ new_or1 = OR_AM_32KB | 0xFF7;
+ set_lbc_br(1, new_br1);
+ set_lbc_or(1, new_or1);
+ }
+
+ /*
+ * Determine the physical addresses for Chip Selects 0 and 1. The
+ * BR0/BR1 registers contain the truncated physical addresses for the
+ * chip selects, mapped via the localbus LAW. Since the BRx registers
+ * only contain the lower 32 bits of the address, we have to determine
+ * the upper 4 bits some other way. The proper way is to scan the LAW
+ * table looking for a matching localbus address. Instead, we cheat.
+ * We know that the upper bits are 0 for 32-bit addressing, or 0xF for
+ * 36-bit addressing.
+ */
+#ifdef CONFIG_PHYS_64BIT
+ phys0 = 0xf00000000ULL | (old_br0 & old_or0 & BR_BA);
+ phys1 = 0xf00000000ULL | (old_br1 & old_or1 & BR_BA);
+#else
+ phys0 = old_br0 & old_or0 & BR_BA;
+ phys1 = old_br1 & old_or1 & BR_BA;
+#endif
+
+ /* Save the LBC LCS0 and LCS1 addresses for the DIU mux functions */
+ lbc_lcs0_ba = map_physmem(phys0, 1, 0);
+ lbc_lcs1_ba = map_physmem(phys1, 1, 0);
pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) |
(0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) |
@@ -134,6 +189,7 @@ int platform_diu_init(unsigned int xres, unsigned int yres, const char *port)
out_8(lbc_lcs0_ba, offsetof(ngpixis_t, brdcfg0));
px_brdcfg0 = in_8(lbc_lcs1_ba);
out_8(lbc_lcs1_ba, px_brdcfg0 | PX_BRDCFG0_ELBC_DIU);
+ in_8(lbc_lcs1_ba);
/* Set PMUXCR to switch the muxed pins from the LBC to the DIU */
clrsetbits_be32(&gur->pmuxcr, PMUXCR_ELBCDIU_MASK, PMUXCR_ELBCDIU_DIU);
@@ -168,12 +224,10 @@ static int set_mux_to_lbc(void)
* In DIU mode, the PIXIS can only be accessed indirectly
* since we can't read/write the LBC directly.
*/
-
/* Set the board mux to LBC. This will disable the display. */
out_8(lbc_lcs0_ba, offsetof(ngpixis_t, brdcfg0));
- px_brdcfg0 = in_8(lbc_lcs1_ba);
- out_8(lbc_lcs1_ba, (px_brdcfg0 & ~(PX_BRDCFG0_ELBC_SPI_MASK
- | PX_BRDCFG0_ELBC_DIU)) | PX_BRDCFG0_ELBC_SPI_ELBC);
+ out_8(lbc_lcs1_ba, px_brdcfg0);
+ in_8(lbc_lcs1_ba);
/* Disable indirect PIXIS mode */
out_8(lbc_lcs0_ba, offsetof(ngpixis_t, csr));
@@ -184,6 +238,12 @@ static int set_mux_to_lbc(void)
PMUXCR_ELBCDIU_NOR16);
in_be32(&gur->pmuxcr);
+ /* Restore the BR0 and BR1 settings */
+ set_lbc_br(0, old_br0);
+ set_lbc_or(0, old_or0);
+ set_lbc_br(1, old_br1);
+ set_lbc_or(1, old_or1);
+
return 1;
}
@@ -199,12 +259,18 @@ static void set_mux_to_diu(void)
{
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ /* Set BR0 and BR1 to GPCM mode */
+ set_lbc_br(0, new_br0);
+ set_lbc_or(0, new_or0);
+ set_lbc_br(1, new_br1);
+ set_lbc_or(1, new_or1);
+
/* Enable indirect PIXIS mode */
setbits_8(&pixis->csr, PX_CTL_ALTACC);
/* Set the board mux to DIU. This will enable the display. */
out_8(lbc_lcs0_ba, offsetof(ngpixis_t, brdcfg0));
- out_8(lbc_lcs1_ba, px_brdcfg0);
+ out_8(lbc_lcs1_ba, px_brdcfg0 | PX_BRDCFG0_ELBC_DIU);
in_8(lbc_lcs1_ba);
/* Set the chip mux to DIU mode. */
diff --git a/board/freescale/p1022ds/p1022ds.c b/board/freescale/p1022ds/p1022ds.c
index 56dfcce..25fdc2a 100644
--- a/board/freescale/p1022ds/p1022ds.c
+++ b/board/freescale/p1022ds/p1022ds.c
@@ -39,6 +39,10 @@ int board_early_init_f(void)
/* Set pmuxcr to allow both i2c1 and i2c2 */
setbits_be32(&gur->pmuxcr, 0x1000);
+#ifdef CONFIG_SYS_RAMBOOT
+ setbits_be32(&gur->pmuxcr,
+ in_be32(&gur->pmuxcr) | MPC85xx_PMUXCR_SD_DATA);
+#endif
/* Read back the register to synchronize the write. */
in_be32(&gur->pmuxcr);
diff --git a/board/freescale/p1022ds/tlb.c b/board/freescale/p1022ds/tlb.c
index e620112..71e71f7 100644
--- a/board/freescale/p1022ds/tlb.c
+++ b/board/freescale/p1022ds/tlb.c
@@ -71,6 +71,20 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 7, BOOKE_PAGESZ_4K, 1),
+
+#ifdef CONFIG_SYS_RAMBOOT
+ /* *I*G - eSDHC/eSPI/NAND boot */
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
+ MAS3_SX|MAS3_SW|MAS3_SR, 0,
+ 0, 8, BOOKE_PAGESZ_1G, 1),
+
+ /* map the second 1G */
+ SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+ CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 9, BOOKE_PAGESZ_1G, 1),
+#endif
+#
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/p2041rdb/eth.c b/board/freescale/p2041rdb/eth.c
index 4b0d577..fec9777 100644
--- a/board/freescale/p2041rdb/eth.c
+++ b/board/freescale/p2041rdb/eth.c
@@ -136,6 +136,11 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
}
#endif /* #ifdef CONFIG_FMAN_ENET */
+#define CPLD_LANE_A_SEL 0x1
+#define CPLD_LANE_G_SEL 0x2
+#define CPLD_LANE_C_SEL 0x4
+#define CPLD_LANE_D_SEL 0x8
+
int board_eth_init(bd_t *bis)
{
#ifdef CONFIG_FMAN_ENET
@@ -143,6 +148,10 @@ int board_eth_init(bd_t *bis)
struct tgec_mdio_info tgec_mdio_info;
unsigned int i, slot;
int lane;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
+ u8 mux = CPLD_READ(serdes_mux);
printf("Initializing Fman\n");
@@ -172,6 +181,36 @@ int board_eth_init(bd_t *bis)
fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR);
+ mux &= ~(CPLD_LANE_A_SEL | CPLD_LANE_C_SEL | CPLD_LANE_D_SEL);
+ switch (srds_prtcl) {
+ case 0x2:
+ case 0xf:
+ mux &= ~CPLD_LANE_G_SEL;
+ break;
+ case 0x5:
+ case 0x9:
+ case 0xa:
+ case 0x17:
+ mux |= CPLD_LANE_G_SEL;
+ break;
+ case 0x14:
+ mux = (mux & (~CPLD_LANE_G_SEL)) | CPLD_LANE_A_SEL;
+ break;
+ case 0x8:
+ case 0x16:
+ case 0x19:
+ case 0x1a:
+ mux |= CPLD_LANE_G_SEL | CPLD_LANE_C_SEL | CPLD_LANE_D_SEL;
+ break;
+ case 0x1c:
+ mux |= CPLD_LANE_G_SEL | CPLD_LANE_A_SEL;
+ break;
+ default:
+ printf("Fman:Unsupported SerDes Protocol 0x%02x\n", srds_prtcl);
+ break;
+ }
+ CPLD_WRITE(serdes_mux, mux);
+
for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
int idx = i - FM1_DTSEC1;
diff --git a/boards.cfg b/boards.cfg
index 1af87c0..0598763 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -731,6 +731,10 @@ P1021RDB-PC_NAND powerpc mpc85xx p1_p2_rdb_pc freesca
P1021RDB-PC_SDCARD powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,SDCARD
P1021RDB-PC_SPIFLASH powerpc mpc85xx p1_p2_rdb_pc freescale - p1_p2_rdb_pc:P1021RDB,SPIFLASH
P1022DS powerpc mpc85xx p1022ds freescale
+P1022DS_SPIFLASH powerpc mpc85xx p1022ds freescale - P1022DS:SPIFLASH
+P1022DS_36BIT_SPIFLASH powerpc mpc85xx p1022ds freescale - P1022DS:36BIT,SPIFLASH
+P1022DS_SDCARD powerpc mpc85xx p1022ds freescale - P1022DS:SDCARD
+P1022DS_36BIT_SDCARD powerpc mpc85xx p1022ds freescale - P1022DS:36BIT,SDCARD
P1022DS_36BIT powerpc mpc85xx p1022ds freescale - P1022DS:36BIT
P1023RDS powerpc mpc85xx p1023rds freescale - P1023RDS
P1023RDS_NAND powerpc mpc85xx p1023rds freescale - P1023RDS:NAND
diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h
index 33ded71..ceed5ea 100644
--- a/include/configs/MPC8536DS.h
+++ b/include/configs/MPC8536DS.h
@@ -217,8 +217,7 @@
#endif
#define CONFIG_FLASH_BR_PRELIM \
- (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \
- | BR_PS_16 | BR_V)
+ (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
#define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
#define CONFIG_SYS_BR1_PRELIM \
@@ -380,14 +379,14 @@
#endif
#define CONFIG_SYS_BR4_PRELIM \
- (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000)) \
+ (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8 bit */ \
| BR_MS_FCM /* MSEL = FCM */ \
| BR_V) /* valid */
#define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
#define CONFIG_SYS_BR5_PRELIM \
- (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000)) \
+ (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8 bit */ \
| BR_MS_FCM /* MSEL = FCM */ \
@@ -395,7 +394,7 @@
#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
#define CONFIG_SYS_BR6_PRELIM \
- (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000)) \
+ (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8 bit */ \
| BR_MS_FCM /* MSEL = FCM */ \
diff --git a/include/configs/MPC8548CDS.h b/include/configs/MPC8548CDS.h
index e263994..95ce003 100644
--- a/include/configs/MPC8548CDS.h
+++ b/include/configs/MPC8548CDS.h
@@ -189,8 +189,7 @@ extern unsigned long get_clock_freq(void);
#endif
#define CONFIG_SYS_BR0_PRELIM \
- (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x800000)) \
- | BR_PS_16 | BR_V)
+ (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x800000) | BR_PS_16 | BR_V)
#define CONFIG_SYS_BR1_PRELIM \
(BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 956449e..d1b5b70 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -205,8 +205,7 @@
#define CONFIG_FLASH_BR_PRELIM \
- (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \
- | BR_PS_16 | BR_V)
+ (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
#define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
@@ -376,20 +375,20 @@
#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
#endif
-#define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\
+#define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8 bit */ \
| BR_MS_FCM /* MSEL = FCM */ \
| BR_V) /* valid */
#define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\
+#define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000)\
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8 bit */ \
| BR_MS_FCM /* MSEL = FCM */ \
| BR_V) /* valid */
#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\
+#define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000)\
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8 bit */ \
| BR_MS_FCM /* MSEL = FCM */ \
diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h
index 50d3f8d..1d97e95 100644
--- a/include/configs/P1022DS.h
+++ b/include/configs/P1022DS.h
@@ -18,6 +18,22 @@
#define CONFIG_PHYS_64BIT
#endif
+#ifdef CONFIG_SDCARD
+#define CONFIG_RAMBOOT_SDCARD
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_TEXT_BASE 0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
+#endif
+
+#ifdef CONFIG_SPIFLASH
+#define CONFIG_RAMBOOT_SPIFLASH
+#define CONFIG_SYS_RAMBOOT
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_SYS_TEXT_BASE 0x11000000
+#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
+#endif
+
/* High Level Configuration Options */
#define CONFIG_BOOKE /* BOOKE */
#define CONFIG_E500 /* BOOKE e500 family */
@@ -118,7 +134,7 @@
#endif
#define CONFIG_FLASH_BR_PRELIM \
- (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V)
+ (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
#define CONFIG_FLASH_OR_PRELIM (OR_AM_128MB | 0xff7)
#define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
@@ -402,11 +418,40 @@
/*
* Environment
*/
+#ifdef CONFIG_SYS_RAMBOOT
+#ifdef CONFIG_RAMBOOT_SPIFLASH
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS 0
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_MAX_HZ 10000000
+#define CONFIG_ENV_SPI_MODE 0
+#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
+#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#elif defined(CONFIG_RAMBOOT_SDCARD)
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_ENV_SIZE 0x2000
+#define CONFIG_SYS_MMC_ENV_DEV 0
+#elif defined(CONFIG_NAND_U_BOOT)
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
+#else
+#define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
+#define CONFIG_ENV_SIZE 0x2000
+#endif
+#else
#define CONFIG_ENV_IS_IN_FLASH
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#if CONFIG_SYS_MONITOR_BASE > 0xfff80000
+#define CONFIG_ENV_ADDR 0xfff80000
+#else
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#endif
#define CONFIG_ENV_SIZE 0x2000
-#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
+#endif
#define CONFIG_LOADS_ECHO
#define CONFIG_SYS_LOADS_BAUD_CHANGE
diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h
index 5fc9563..ae22acb 100644
--- a/include/configs/P2020DS.h
+++ b/include/configs/P2020DS.h
@@ -236,7 +236,8 @@
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
#endif
-#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V)
+#define CONFIG_FLASH_BR_PRELIM \
+ (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) | BR_PS_16 | BR_V)
#define CONFIG_FLASH_OR_PRELIM 0xf8000ff7
#define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
@@ -338,20 +339,20 @@
#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\
+#define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x40000) \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8bit */ \
| BR_MS_FCM /* MSEL = FCM */ \
| BR_V) /* valid */
#define CONFIG_SYS_OR4_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\
+#define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0x80000) \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8bit */ \
| BR_MS_FCM /* MSEL = FCM */ \
| BR_V) /* valid */
#define CONFIG_SYS_OR5_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
-#define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\
+#define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS + 0xc0000) \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8bit */ \
| BR_MS_FCM /* MSEL = FCM */ \
diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h
index 1251b5c..1c0eb74 100644
--- a/include/configs/P2041RDB.h
+++ b/include/configs/P2041RDB.h
@@ -73,10 +73,13 @@
#define CONFIG_ENV_OVERWRITE
#ifdef CONFIG_SYS_NO_FLASH
+#ifndef CONFIG_RAMBOOT_PBL
#define CONFIG_ENV_IS_NOWHERE
+#endif
#else
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#endif
#if defined(CONFIG_SPIFLASH)
@@ -101,6 +104,8 @@
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
#define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#elif defined(CONFIG_ENV_IS_NOWHERE)
+ #define CONFIG_ENV_SIZE 0x2000
#else
#define CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 52a5ba9..f8f7a82 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -77,7 +77,7 @@
#define CONFIG_ENV_OVERWRITE
#ifdef CONFIG_SYS_NO_FLASH
-#ifndef CONFIG_SRIOBOOT_SLAVE
+#if !defined(CONFIG_SRIOBOOT_SLAVE) && !defined(CONFIG_RAMBOOT_PBL)
#define CONFIG_ENV_IS_NOWHERE
#endif
#else
@@ -211,7 +211,7 @@
#endif
#define CONFIG_SYS_FLASH_BR_PRELIM \
- (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \
+ (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000) \
| BR_PS_16 | BR_V)
#define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \
| OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR)
diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h
index 2cb942b..a8882d4 100644
--- a/include/configs/p1_p2_rdb_pc.h
+++ b/include/configs/p1_p2_rdb_pc.h
@@ -357,7 +357,7 @@
#define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
#endif
-#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS)) \
+#define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) \
| BR_PS_16 | BR_V)
#define CONFIG_FLASH_OR_PRELIM 0xfc000ff7
@@ -401,7 +401,7 @@
#define CONFIG_SYS_NAND_U_BOOT_RELOC 0x00010000
#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
-#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS)) \
+#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
| (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
| BR_PS_8 /* Port Size = 8 bit */ \
| BR_MS_FCM /* MSEL = FCM */ \
generated by cgit v1.1 at 2024-12-16 01:27:38 +0000