diff options
| -rw-r--r-- | drivers/usb/host/xhci-omap.c | 171 | ||||
| -rw-r--r-- | drivers/usb/phy/Makefile | 1 | ||||
| -rw-r--r-- | drivers/usb/phy/omap_usb_phy.c | 197 | ||||
| -rw-r--r-- | include/linux/usb/xhci-omap.h | 6 |
4 files changed, 206 insertions, 169 deletions
diff --git a/drivers/usb/host/xhci-omap.c b/drivers/usb/host/xhci-omap.c index 4f98c77..7292ed8 100644 --- a/drivers/usb/host/xhci-omap.c +++ b/drivers/usb/host/xhci-omap.c @@ -27,161 +27,6 @@ DECLARE_GLOBAL_DATA_PTR; static struct omap_xhci omap; -struct usb_dpll_params { - u16 m; - u8 n; - u8 freq:3; - u8 sd; - u32 mf; -}; - -#define NUM_USB_CLKS 6 - -static struct usb_dpll_params omap_usb3_dpll_params[NUM_USB_CLKS] = { - {1250, 5, 4, 20, 0}, /* 12 MHz */ - {3125, 20, 4, 20, 0}, /* 16.8 MHz */ - {1172, 8, 4, 20, 65537}, /* 19.2 MHz */ - {1250, 12, 4, 20, 0}, /* 26 MHz */ - {3125, 47, 4, 20, 92843}, /* 38.4 MHz */ - {1000, 7, 4, 10, 0}, /* 20 MHz */ -}; - -static void omap_usb_dpll_relock(struct omap_usb3_phy *phy_regs) -{ - u32 val; - - writel(SET_PLL_GO, &phy_regs->pll_go); - do { - val = readl(&phy_regs->pll_status); - if (val & PLL_LOCK) - break; - } while (1); -} - -static void omap_usb_dpll_lock(struct omap_usb3_phy *phy_regs) -{ - u32 clk_index = get_sys_clk_index(); - u32 val; - - val = readl(&phy_regs->pll_config_1); - val &= ~PLL_REGN_MASK; - val |= omap_usb3_dpll_params[clk_index].n << PLL_REGN_SHIFT; - writel(val, &phy_regs->pll_config_1); - - val = readl(&phy_regs->pll_config_2); - val &= ~PLL_SELFREQDCO_MASK; - val |= omap_usb3_dpll_params[clk_index].freq << PLL_SELFREQDCO_SHIFT; - writel(val, &phy_regs->pll_config_2); - - val = readl(&phy_regs->pll_config_1); - val &= ~PLL_REGM_MASK; - val |= omap_usb3_dpll_params[clk_index].m << PLL_REGM_SHIFT; - writel(val, &phy_regs->pll_config_1); - - val = readl(&phy_regs->pll_config_4); - val &= ~PLL_REGM_F_MASK; - val |= omap_usb3_dpll_params[clk_index].mf << PLL_REGM_F_SHIFT; - writel(val, &phy_regs->pll_config_4); - - val = readl(&phy_regs->pll_config_3); - val &= ~PLL_SD_MASK; - val |= omap_usb3_dpll_params[clk_index].sd << PLL_SD_SHIFT; - writel(val, &phy_regs->pll_config_3); - - omap_usb_dpll_relock(phy_regs); -} - -static void usb3_phy_partial_powerup(struct omap_usb3_phy *phy_regs) -{ - u32 rate = get_sys_clk_freq()/1000000; - u32 val; - - val = readl((*ctrl)->control_phy_power_usb); - val &= ~(USB3_PWRCTL_CLK_CMD_MASK | USB3_PWRCTL_CLK_FREQ_MASK); - val |= (USB3_PHY_PARTIAL_RX_POWERON | USB3_PHY_TX_RX_POWERON); - val |= rate << USB3_PWRCTL_CLK_FREQ_SHIFT; - - writel(val, (*ctrl)->control_phy_power_usb); -} - -static void usb3_phy_power(int on) -{ - u32 val; - - val = readl((*ctrl)->control_phy_power_usb); - if (on) { - val &= ~USB3_PWRCTL_CLK_CMD_MASK; - val |= USB3_PHY_TX_RX_POWERON; - } else { - val &= (~USB3_PWRCTL_CLK_CMD_MASK & ~USB3_PHY_TX_RX_POWERON); - } - - writel(val, (*ctrl)->control_phy_power_usb); -} - -static void dwc_usb3_phy_init(struct omap_usb3_phy *phy_regs) -{ - omap_usb_dpll_lock(phy_regs); - - usb3_phy_partial_powerup(phy_regs); - /* - * Give enough time for the PHY to partially power-up before - * powering it up completely. delay value suggested by the HW - * team. - */ - mdelay(100); - usb3_phy_power(1); -} - -static void omap_enable_phy_clocks(struct omap_xhci *omap) -{ - u32 val; - - /* Setting OCP2SCP1 register */ - setbits_le32((*prcm)->cm_l3init_ocp2scp1_clkctrl, - OCP2SCP1_CLKCTRL_MODULEMODE_HW); - - /* Turn on 32K AON clk */ - setbits_le32((*prcm)->cm_coreaon_usb_phy_core_clkctrl, - USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); - - /* Setting CM_L3INIT_CLKSTCTRL to 0x0 i.e NO sleep */ - writel(0x0, (*prcm)->cm_l3init_clkstctrl); - - val = (USBOTGSS_DMADISABLE | - USBOTGSS_STANDBYMODE_SMRT_WKUP | - USBOTGSS_IDLEMODE_NOIDLE); - writel(val, &omap->otg_wrapper->sysconfig); - - /* Clear the utmi OTG status */ - val = readl(&omap->otg_wrapper->utmi_otg_status); - writel(val, &omap->otg_wrapper->utmi_otg_status); - - /* Enable interrupts */ - writel(USBOTGSS_COREIRQ_EN, &omap->otg_wrapper->irqenable_set_0); - val = (USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN | - USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN | - USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN | - USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN | - USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN | - USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN | - USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN | - USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN | - USBOTGSS_IRQ_SET_1_OEVT_EN); - writel(val, &omap->otg_wrapper->irqenable_set_1); - - /* Clear the IRQ status */ - val = readl(&omap->otg_wrapper->irqstatus_1); - writel(val, &omap->otg_wrapper->irqstatus_1); - val = readl(&omap->otg_wrapper->irqstatus_0); - writel(val, &omap->otg_wrapper->irqstatus_0); - - /* Enable the USB OTG Super speed clocks */ - val = (OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW); - setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl, val); - -}; - inline int __board_usb_init(int index, enum board_usb_init_type init) { return 0; @@ -201,19 +46,7 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc3_reg) /* Before Resetting PHY, put Core in Reset */ setbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); - /* Assert USB3 PHY reset */ - setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); - - /* Assert USB2 PHY reset */ - setbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); - - mdelay(100); - - /* Clear USB3 PHY reset */ - clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); - - /* Clear USB2 PHY reset */ - clrbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); + omap_reset_usb_phy(dwc3_reg); /* After PHYs are stable we can take Core out of reset state */ clrbits_le32(&dwc3_reg->g_ctl, DWC3_GCTL_CORESOFTRESET); @@ -267,7 +100,7 @@ static int omap_xhci_core_init(struct omap_xhci *omap) omap_enable_phy_clocks(omap); - dwc_usb3_phy_init(omap->usb3_phy); + omap_usb3_phy_init(omap->usb3_phy); ret = dwc3_core_init(omap->dwc3_reg); if (ret) { diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index f93121a..5beec78 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -10,6 +10,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)libusb_phy.o COBJS-$(CONFIG_TWL4030_USB) += twl4030.o +COBJS-$(CONFIG_OMAP_USB_PHY) += omap_usb_phy.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/usb/phy/omap_usb_phy.c b/drivers/usb/phy/omap_usb_phy.c new file mode 100644 index 0000000..ed727bf --- /dev/null +++ b/drivers/usb/phy/omap_usb_phy.c @@ -0,0 +1,197 @@ +/* + * OMAP USB PHY Support + * + * (C) Copyright 2013 + * Texas Instruments, <www.ti.com> + * + * Author: Dan Murphy <dmurphy@ti.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <usb.h> +#include <asm-generic/errno.h> +#include <asm/omap_common.h> +#include <asm/arch/cpu.h> +#include <asm/arch/sys_proto.h> + +#include <linux/compat.h> +#include <linux/usb/dwc3.h> +#include <linux/usb/xhci-omap.h> + +#include "../host/xhci.h" + +struct usb_dpll_params { + u16 m; + u8 n; + u8 freq:3; + u8 sd; + u32 mf; +}; + +#define NUM_USB_CLKS 6 + +static struct usb_dpll_params omap_usb3_dpll_params[NUM_USB_CLKS] = { + {1250, 5, 4, 20, 0}, /* 12 MHz */ + {3125, 20, 4, 20, 0}, /* 16.8 MHz */ + {1172, 8, 4, 20, 65537}, /* 19.2 MHz */ + {1250, 12, 4, 20, 0}, /* 26 MHz */ + {3125, 47, 4, 20, 92843}, /* 38.4 MHz */ + {1000, 7, 4, 10, 0}, /* 20 MHz */ +}; + +static void omap_usb_dpll_relock(struct omap_usb3_phy *phy_regs) +{ + u32 val; + + writel(SET_PLL_GO, &phy_regs->pll_go); + do { + val = readl(&phy_regs->pll_status); + if (val & PLL_LOCK) + break; + } while (1); +} + +static void omap_usb_dpll_lock(struct omap_usb3_phy *phy_regs) +{ + u32 clk_index = get_sys_clk_index(); + u32 val; + + val = readl(&phy_regs->pll_config_1); + val &= ~PLL_REGN_MASK; + val |= omap_usb3_dpll_params[clk_index].n << PLL_REGN_SHIFT; + writel(val, &phy_regs->pll_config_1); + + val = readl(&phy_regs->pll_config_2); + val &= ~PLL_SELFREQDCO_MASK; + val |= omap_usb3_dpll_params[clk_index].freq << PLL_SELFREQDCO_SHIFT; + writel(val, &phy_regs->pll_config_2); + + val = readl(&phy_regs->pll_config_1); + val &= ~PLL_REGM_MASK; + val |= omap_usb3_dpll_params[clk_index].m << PLL_REGM_SHIFT; + writel(val, &phy_regs->pll_config_1); + + val = readl(&phy_regs->pll_config_4); + val &= ~PLL_REGM_F_MASK; + val |= omap_usb3_dpll_params[clk_index].mf << PLL_REGM_F_SHIFT; + writel(val, &phy_regs->pll_config_4); + + val = readl(&phy_regs->pll_config_3); + val &= ~PLL_SD_MASK; + val |= omap_usb3_dpll_params[clk_index].sd << PLL_SD_SHIFT; + writel(val, &phy_regs->pll_config_3); + + omap_usb_dpll_relock(phy_regs); +} + +static void usb3_phy_partial_powerup(struct omap_usb3_phy *phy_regs) +{ + u32 rate = get_sys_clk_freq()/1000000; + u32 val; + + val = readl((*ctrl)->control_phy_power_usb); + val &= ~(USB3_PWRCTL_CLK_CMD_MASK | USB3_PWRCTL_CLK_FREQ_MASK); + val |= (USB3_PHY_PARTIAL_RX_POWERON | USB3_PHY_TX_RX_POWERON); + val |= rate << USB3_PWRCTL_CLK_FREQ_SHIFT; + + writel(val, (*ctrl)->control_phy_power_usb); +} + +void usb3_phy_power(int on) +{ + u32 val; + + val = readl((*ctrl)->control_phy_power_usb); + if (on) { + val &= ~USB3_PWRCTL_CLK_CMD_MASK; + val |= USB3_PHY_TX_RX_POWERON; + } else { + val &= (~USB3_PWRCTL_CLK_CMD_MASK & ~USB3_PHY_TX_RX_POWERON); + } + + writel(val, (*ctrl)->control_phy_power_usb); +} + +void omap_usb3_phy_init(struct omap_usb3_phy *phy_regs) +{ + omap_usb_dpll_lock(phy_regs); + + usb3_phy_partial_powerup(phy_regs); + /* + * Give enough time for the PHY to partially power-up before + * powering it up completely. delay value suggested by the HW + * team. + */ + mdelay(100); + usb3_phy_power(1); +} + +void omap_enable_phy_clocks(struct omap_xhci *omap) +{ + u32 val; + + /* Setting OCP2SCP1 register */ + setbits_le32((*prcm)->cm_l3init_ocp2scp1_clkctrl, + OCP2SCP1_CLKCTRL_MODULEMODE_HW); + + /* Turn on 32K AON clk */ + setbits_le32((*prcm)->cm_coreaon_usb_phy_core_clkctrl, + USBPHY_CORE_CLKCTRL_OPTFCLKEN_CLK32K); + + /* Setting CM_L3INIT_CLKSTCTRL to 0x0 i.e NO sleep */ + writel(0x0, (*prcm)->cm_l3init_clkstctrl); + + val = (USBOTGSS_DMADISABLE | + USBOTGSS_STANDBYMODE_SMRT_WKUP | + USBOTGSS_IDLEMODE_NOIDLE); + writel(val, &omap->otg_wrapper->sysconfig); + + /* Clear the utmi OTG status */ + val = readl(&omap->otg_wrapper->utmi_otg_status); + writel(val, &omap->otg_wrapper->utmi_otg_status); + + /* Enable interrupts */ + writel(USBOTGSS_COREIRQ_EN, &omap->otg_wrapper->irqenable_set_0); + val = (USBOTGSS_IRQ_SET_1_IDPULLUP_FALL_EN | + USBOTGSS_IRQ_SET_1_DISCHRGVBUS_FALL_EN | + USBOTGSS_IRQ_SET_1_CHRGVBUS_FALL_EN | + USBOTGSS_IRQ_SET_1_DRVVBUS_FALL_EN | + USBOTGSS_IRQ_SET_1_IDPULLUP_RISE_EN | + USBOTGSS_IRQ_SET_1_DISCHRGVBUS_RISE_EN | + USBOTGSS_IRQ_SET_1_CHRGVBUS_RISE_EN | + USBOTGSS_IRQ_SET_1_DRVVBUS_RISE_EN | + USBOTGSS_IRQ_SET_1_OEVT_EN); + writel(val, &omap->otg_wrapper->irqenable_set_1); + + /* Clear the IRQ status */ + val = readl(&omap->otg_wrapper->irqstatus_1); + writel(val, &omap->otg_wrapper->irqstatus_1); + val = readl(&omap->otg_wrapper->irqstatus_0); + writel(val, &omap->otg_wrapper->irqstatus_0); + + /* Enable the USB OTG Super speed clocks */ + val = (OPTFCLKEN_REFCLK960M | OTG_SS_CLKCTRL_MODULEMODE_HW); + setbits_le32((*prcm)->cm_l3init_usb_otg_ss_clkctrl, val); + +}; + +void omap_reset_usb_phy(struct dwc3 *dwc3_reg) +{ + /* Assert USB3 PHY reset */ + setbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); + + /* Assert USB2 PHY reset */ + setbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); + + mdelay(100); + + /* Clear USB3 PHY reset */ + clrbits_le32(&dwc3_reg->g_usb3pipectl[0], DWC3_GUSB3PIPECTL_PHYSOFTRST); + + /* Clear USB2 PHY reset */ + clrbits_le32(&dwc3_reg->g_usb2phycfg, DWC3_GUSB2PHYCFG_PHYSOFTRST); + +} + diff --git a/include/linux/usb/xhci-omap.h b/include/linux/usb/xhci-omap.h index b557a43..a73c0f9 100644 --- a/include/linux/usb/xhci-omap.h +++ b/include/linux/usb/xhci-omap.h @@ -121,4 +121,10 @@ struct omap_xhci { struct dwc3 *dwc3_reg; }; +/* USB PHY functions */ +void omap_enable_phy_clocks(struct omap_xhci *omap); +void omap_usb3_phy_init(struct omap_usb3_phy *phy_regs); +void omap_reset_usb_phy(struct dwc3 *dwc3_reg); +void usb3_phy_power(int on); + #endif /* _ASM_ARCH_XHCI_OMAP_H_ */ |