diff options
| -rw-r--r-- | drivers/net/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/enc28j60_lpc2292.c | 983 |
2 files changed, 0 insertions, 984 deletions
diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 3f4f974..d075ba5 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -40,7 +40,6 @@ COBJS-$(CONFIG_DNET) += dnet.o COBJS-$(CONFIG_E1000) += e1000.o COBJS-$(CONFIG_EEPRO100) += eepro100.o COBJS-$(CONFIG_ENC28J60) += enc28j60.o -COBJS-$(CONFIG_ENC28J60_LPC2292) += enc28j60_lpc2292.o COBJS-$(CONFIG_EP93XX) += ep93xx_eth.o COBJS-$(CONFIG_ETHOC) += ethoc.o COBJS-$(CONFIG_FEC_MXC) += fec_mxc.o diff --git a/drivers/net/enc28j60_lpc2292.c b/drivers/net/enc28j60_lpc2292.c deleted file mode 100644 index bf95052..0000000 --- a/drivers/net/enc28j60_lpc2292.c +++ /dev/null @@ -1,983 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#warning This driver is depreciated. Please update to new SPI framework enc28j60 driver -#include <config.h> -#include <common.h> -#include <net.h> -#include <asm/arch/hardware.h> -#include <asm/arch/spi.h> - -/* - * Control Registers in Bank 0 - */ - -#define CTL_REG_ERDPTL 0x00 -#define CTL_REG_ERDPTH 0x01 -#define CTL_REG_EWRPTL 0x02 -#define CTL_REG_EWRPTH 0x03 -#define CTL_REG_ETXSTL 0x04 -#define CTL_REG_ETXSTH 0x05 -#define CTL_REG_ETXNDL 0x06 -#define CTL_REG_ETXNDH 0x07 -#define CTL_REG_ERXSTL 0x08 -#define CTL_REG_ERXSTH 0x09 -#define CTL_REG_ERXNDL 0x0A -#define CTL_REG_ERXNDH 0x0B -#define CTL_REG_ERXRDPTL 0x0C -#define CTL_REG_ERXRDPTH 0x0D -#define CTL_REG_ERXWRPTL 0x0E -#define CTL_REG_ERXWRPTH 0x0F -#define CTL_REG_EDMASTL 0x10 -#define CTL_REG_EDMASTH 0x11 -#define CTL_REG_EDMANDL 0x12 -#define CTL_REG_EDMANDH 0x13 -#define CTL_REG_EDMADSTL 0x14 -#define CTL_REG_EDMADSTH 0x15 -#define CTL_REG_EDMACSL 0x16 -#define CTL_REG_EDMACSH 0x17 -/* these are common in all banks */ -#define CTL_REG_EIE 0x1B -#define CTL_REG_EIR 0x1C -#define CTL_REG_ESTAT 0x1D -#define CTL_REG_ECON2 0x1E -#define CTL_REG_ECON1 0x1F - -/* - * Control Registers in Bank 1 - */ - -#define CTL_REG_EHT0 0x00 -#define CTL_REG_EHT1 0x01 -#define CTL_REG_EHT2 0x02 -#define CTL_REG_EHT3 0x03 -#define CTL_REG_EHT4 0x04 -#define CTL_REG_EHT5 0x05 -#define CTL_REG_EHT6 0x06 -#define CTL_REG_EHT7 0x07 -#define CTL_REG_EPMM0 0x08 -#define CTL_REG_EPMM1 0x09 -#define CTL_REG_EPMM2 0x0A -#define CTL_REG_EPMM3 0x0B -#define CTL_REG_EPMM4 0x0C -#define CTL_REG_EPMM5 0x0D -#define CTL_REG_EPMM6 0x0E -#define CTL_REG_EPMM7 0x0F -#define CTL_REG_EPMCSL 0x10 -#define CTL_REG_EPMCSH 0x11 -#define CTL_REG_EPMOL 0x14 -#define CTL_REG_EPMOH 0x15 -#define CTL_REG_EWOLIE 0x16 -#define CTL_REG_EWOLIR 0x17 -#define CTL_REG_ERXFCON 0x18 -#define CTL_REG_EPKTCNT 0x19 - -/* - * Control Registers in Bank 2 - */ - -#define CTL_REG_MACON1 0x00 -#define CTL_REG_MACON2 0x01 -#define CTL_REG_MACON3 0x02 -#define CTL_REG_MACON4 0x03 -#define CTL_REG_MABBIPG 0x04 -#define CTL_REG_MAIPGL 0x06 -#define CTL_REG_MAIPGH 0x07 -#define CTL_REG_MACLCON1 0x08 -#define CTL_REG_MACLCON2 0x09 -#define CTL_REG_MAMXFLL 0x0A -#define CTL_REG_MAMXFLH 0x0B -#define CTL_REG_MAPHSUP 0x0D -#define CTL_REG_MICON 0x11 -#define CTL_REG_MICMD 0x12 -#define CTL_REG_MIREGADR 0x14 -#define CTL_REG_MIWRL 0x16 -#define CTL_REG_MIWRH 0x17 -#define CTL_REG_MIRDL 0x18 -#define CTL_REG_MIRDH 0x19 - -/* - * Control Registers in Bank 3 - */ - -#define CTL_REG_MAADR1 0x00 -#define CTL_REG_MAADR0 0x01 -#define CTL_REG_MAADR3 0x02 -#define CTL_REG_MAADR2 0x03 -#define CTL_REG_MAADR5 0x04 -#define CTL_REG_MAADR4 0x05 -#define CTL_REG_EBSTSD 0x06 -#define CTL_REG_EBSTCON 0x07 -#define CTL_REG_EBSTCSL 0x08 -#define CTL_REG_EBSTCSH 0x09 -#define CTL_REG_MISTAT 0x0A -#define CTL_REG_EREVID 0x12 -#define CTL_REG_ECOCON 0x15 -#define CTL_REG_EFLOCON 0x17 -#define CTL_REG_EPAUSL 0x18 -#define CTL_REG_EPAUSH 0x19 - - -/* - * PHY Register - */ - -#define PHY_REG_PHID1 0x02 -#define PHY_REG_PHID2 0x03 -/* taken from the Linux driver */ -#define PHY_REG_PHCON1 0x00 -#define PHY_REG_PHCON2 0x10 -#define PHY_REG_PHLCON 0x14 - -/* - * Receive Filter Register (ERXFCON) bits - */ - -#define ENC_RFR_UCEN 0x80 -#define ENC_RFR_ANDOR 0x40 -#define ENC_RFR_CRCEN 0x20 -#define ENC_RFR_PMEN 0x10 -#define ENC_RFR_MPEN 0x08 -#define ENC_RFR_HTEN 0x04 -#define ENC_RFR_MCEN 0x02 -#define ENC_RFR_BCEN 0x01 - -/* - * ECON1 Register Bits - */ - -#define ENC_ECON1_TXRST 0x80 -#define ENC_ECON1_RXRST 0x40 -#define ENC_ECON1_DMAST 0x20 -#define ENC_ECON1_CSUMEN 0x10 -#define ENC_ECON1_TXRTS 0x08 -#define ENC_ECON1_RXEN 0x04 -#define ENC_ECON1_BSEL1 0x02 -#define ENC_ECON1_BSEL0 0x01 - -/* - * ECON2 Register Bits - */ -#define ENC_ECON2_AUTOINC 0x80 -#define ENC_ECON2_PKTDEC 0x40 -#define ENC_ECON2_PWRSV 0x20 -#define ENC_ECON2_VRPS 0x08 - -/* - * EIR Register Bits - */ -#define ENC_EIR_PKTIF 0x40 -#define ENC_EIR_DMAIF 0x20 -#define ENC_EIR_LINKIF 0x10 -#define ENC_EIR_TXIF 0x08 -#define ENC_EIR_WOLIF 0x04 -#define ENC_EIR_TXERIF 0x02 -#define ENC_EIR_RXERIF 0x01 - -/* - * ESTAT Register Bits - */ - -#define ENC_ESTAT_INT 0x80 -#define ENC_ESTAT_LATECOL 0x10 -#define ENC_ESTAT_RXBUSY 0x04 -#define ENC_ESTAT_TXABRT 0x02 -#define ENC_ESTAT_CLKRDY 0x01 - -/* - * EIE Register Bits - */ - -#define ENC_EIE_INTIE 0x80 -#define ENC_EIE_PKTIE 0x40 -#define ENC_EIE_DMAIE 0x20 -#define ENC_EIE_LINKIE 0x10 -#define ENC_EIE_TXIE 0x08 -#define ENC_EIE_WOLIE 0x04 -#define ENC_EIE_TXERIE 0x02 -#define ENC_EIE_RXERIE 0x01 - -/* - * MACON1 Register Bits - */ -#define ENC_MACON1_LOOPBK 0x10 -#define ENC_MACON1_TXPAUS 0x08 -#define ENC_MACON1_RXPAUS 0x04 -#define ENC_MACON1_PASSALL 0x02 -#define ENC_MACON1_MARXEN 0x01 - - -/* - * MACON2 Register Bits - */ -#define ENC_MACON2_MARST 0x80 -#define ENC_MACON2_RNDRST 0x40 -#define ENC_MACON2_MARXRST 0x08 -#define ENC_MACON2_RFUNRST 0x04 -#define ENC_MACON2_MATXRST 0x02 -#define ENC_MACON2_TFUNRST 0x01 - -/* - * MACON3 Register Bits - */ -#define ENC_MACON3_PADCFG2 0x80 -#define ENC_MACON3_PADCFG1 0x40 -#define ENC_MACON3_PADCFG0 0x20 -#define ENC_MACON3_TXCRCEN 0x10 -#define ENC_MACON3_PHDRLEN 0x08 -#define ENC_MACON3_HFRMEN 0x04 -#define ENC_MACON3_FRMLNEN 0x02 -#define ENC_MACON3_FULDPX 0x01 - -/* - * MICMD Register Bits - */ -#define ENC_MICMD_MIISCAN 0x02 -#define ENC_MICMD_MIIRD 0x01 - -/* - * MISTAT Register Bits - */ -#define ENC_MISTAT_NVALID 0x04 -#define ENC_MISTAT_SCAN 0x02 -#define ENC_MISTAT_BUSY 0x01 - -/* - * PHID1 and PHID2 values - */ -#define ENC_PHID1_VALUE 0x0083 -#define ENC_PHID2_VALUE 0x1400 -#define ENC_PHID2_MASK 0xFC00 - - -#define ENC_SPI_SLAVE_CS 0x00010000 /* pin P1.16 */ -#define ENC_RESET 0x00020000 /* pin P1.17 */ - -#define FAILSAFE_VALUE 5000 - -/* - * Controller memory layout: - * - * 0x0000 - 0x17ff 6k bytes receive buffer - * 0x1800 - 0x1fff 2k bytes transmit buffer - */ -/* Use the lower memory for receiver buffer. See errata pt. 5 */ -#define ENC_RX_BUF_START 0x0000 -#define ENC_TX_BUF_START 0x1800 -/* taken from the Linux driver */ -#define ENC_RX_BUF_END 0x17ff -#define ENC_TX_BUF_END 0x1fff - -/* maximum frame length */ -#define ENC_MAX_FRM_LEN 1518 - -#define enc_enable() PUT32(IO1CLR, ENC_SPI_SLAVE_CS) -#define enc_disable() PUT32(IO1SET, ENC_SPI_SLAVE_CS) -#define enc_cfg_spi() spi_set_cfg(0, 0, 0); spi_set_clock(8); - - -static unsigned char encReadReg (unsigned char regNo); -static void encWriteReg (unsigned char regNo, unsigned char data); -static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c); -static void encReadBuff (unsigned short length, unsigned char *pBuff); -static void encWriteBuff (unsigned short length, unsigned char *pBuff); -static void encBitSet (unsigned char regNo, unsigned char data); -static void encBitClr (unsigned char regNo, unsigned char data); -static void encReset (void); -static void encInit (unsigned char *pEthAddr); -static unsigned short phyRead (unsigned char addr); -static void phyWrite(unsigned char, unsigned short); -static void encPoll (void); -static void encRx (void); - -#define m_nic_read(reg) encReadReg(reg) -#define m_nic_write(reg, data) encWriteReg(reg, data) -#define m_nic_write_retry(reg, data, count) encWriteRegRetry(reg, data, count) -#define m_nic_read_data(len, buf) encReadBuff((len), (buf)) -#define m_nic_write_data(len, buf) encWriteBuff((len), (buf)) - -/* bit field set */ -#define m_nic_bfs(reg, data) encBitSet(reg, data) - -/* bit field clear */ -#define m_nic_bfc(reg, data) encBitClr(reg, data) - -static unsigned char bank = 0; /* current bank in enc28j60 */ -static unsigned char next_pointer_lsb; -static unsigned char next_pointer_msb; - -static unsigned char buffer[ENC_MAX_FRM_LEN]; -static int rxResetCounter = 0; - -#define RX_RESET_COUNTER 1000; - -/*----------------------------------------------------------------------------- - * Always returns 0 - */ -int eth_init (bd_t * bis) -{ - unsigned char estatVal; - uchar enetaddr[6]; - - /* configure GPIO */ - (*((volatile unsigned long *) IO1DIR)) |= ENC_SPI_SLAVE_CS; - (*((volatile unsigned long *) IO1DIR)) |= ENC_RESET; - - /* CS and RESET active low */ - PUT32 (IO1SET, ENC_SPI_SLAVE_CS); - PUT32 (IO1SET, ENC_RESET); - - spi_init (); - - /* taken from the Linux driver - dangerous stuff here! */ - /* Wait for CLKRDY to become set (i.e., check that we can communicate with - the ENC) */ - do - { - estatVal = m_nic_read(CTL_REG_ESTAT); - } while ((estatVal & 0x08) || (~estatVal & ENC_ESTAT_CLKRDY)); - - /* initialize controller */ - encReset (); - eth_getenv_enetaddr("ethaddr", enetaddr); - encInit (enetaddr); - - m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */ - - return 0; -} - -int eth_send (volatile void *packet, int length) -{ - /* check frame length, etc. */ - /* TODO: */ - - /* switch to bank 0 */ - m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0)); - - /* set EWRPT */ - m_nic_write (CTL_REG_EWRPTL, (ENC_TX_BUF_START & 0xff)); - m_nic_write (CTL_REG_EWRPTH, (ENC_TX_BUF_START >> 8)); - - /* set ETXND */ - m_nic_write (CTL_REG_ETXNDL, (length + ENC_TX_BUF_START) & 0xFF); - m_nic_write (CTL_REG_ETXNDH, (length + ENC_TX_BUF_START) >> 8); - - /* set ETXST */ - m_nic_write (CTL_REG_ETXSTL, ENC_TX_BUF_START & 0xFF); - m_nic_write (CTL_REG_ETXSTH, ENC_TX_BUF_START >> 8); - - /* write packet */ - m_nic_write_data (length, (unsigned char *) packet); - - /* taken from the Linux driver */ - /* Verify that the internal transmit logic has not been altered by excessive - collisions. See Errata B4 12 and 14. - */ - if (m_nic_read(CTL_REG_EIR) & ENC_EIR_TXERIF) { - m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_TXRST); - m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_TXRST); - } - m_nic_bfc(CTL_REG_EIR, (ENC_EIR_TXERIF | ENC_EIR_TXIF)); - - /* set ECON1.TXRTS */ - m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_TXRTS); - - return 0; -} - - -/***************************************************************************** - * This function resets the receiver only. This function may be called from - * interrupt-context. - */ -static void encReceiverReset (void) -{ - unsigned char econ1; - - econ1 = m_nic_read (CTL_REG_ECON1); - if ((econ1 & ENC_ECON1_RXRST) == 0) { - m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXRST); - rxResetCounter = RX_RESET_COUNTER; - } -} - -/***************************************************************************** - * receiver reset timer - */ -static void encReceiverResetCallback (void) -{ - m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXRST); - m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_RXEN); /* enable receive */ -} - -/*----------------------------------------------------------------------------- - * Check for received packets. Call NetReceive for each packet. The return - * value is ignored by the caller. - */ -int eth_rx (void) -{ - if (rxResetCounter > 0 && --rxResetCounter == 0) { - encReceiverResetCallback (); - } - - encPoll (); - - return 0; -} - -void eth_halt (void) -{ - m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_RXEN); /* disable receive */ -} - -/*****************************************************************************/ - -static void encPoll (void) -{ - unsigned char eir_reg; - volatile unsigned char estat_reg; - unsigned char pkt_cnt; - -#ifdef CONFIG_USE_IRQ - /* clear global interrupt enable bit in enc28j60 */ - m_nic_bfc (CTL_REG_EIE, ENC_EIE_INTIE); -#endif - estat_reg = m_nic_read (CTL_REG_ESTAT); - - eir_reg = m_nic_read (CTL_REG_EIR); - - if (eir_reg & ENC_EIR_TXIF) { - /* clear TXIF bit in EIR */ - m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXIF); - } - - /* We have to use pktcnt and not pktif bit, see errata pt. 6 */ - - /* move to bank 1 */ - m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1); - m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0); - - /* read pktcnt */ - pkt_cnt = m_nic_read (CTL_REG_EPKTCNT); - - if (pkt_cnt > 0) { - if ((eir_reg & ENC_EIR_PKTIF) == 0) { - /*printf("encPoll: pkt cnt > 0, but pktif not set\n"); */ - } - encRx (); - /* clear PKTIF bit in EIR, this should not need to be done but it - seems like we get problems if we do not */ - m_nic_bfc (CTL_REG_EIR, ENC_EIR_PKTIF); - } - - if (eir_reg & ENC_EIR_RXERIF) { - printf ("encPoll: rx error\n"); - m_nic_bfc (CTL_REG_EIR, ENC_EIR_RXERIF); - } - if (eir_reg & ENC_EIR_TXERIF) { - printf ("encPoll: tx error\n"); - m_nic_bfc (CTL_REG_EIR, ENC_EIR_TXERIF); - } - -#ifdef CONFIG_USE_IRQ - /* set global interrupt enable bit in enc28j60 */ - m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE); -#endif -} - -static void encRx (void) -{ - unsigned short pkt_len; - unsigned short copy_len; - unsigned short status; - unsigned char eir_reg; - unsigned char pkt_cnt = 0; - unsigned short rxbuf_rdpt; - - /* switch to bank 0 */ - m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0)); - - m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb); - m_nic_write (CTL_REG_ERDPTH, next_pointer_msb); - - do { - m_nic_read_data (6, buffer); - next_pointer_lsb = buffer[0]; - next_pointer_msb = buffer[1]; - pkt_len = buffer[2]; - pkt_len |= (unsigned short) buffer[3] << 8; - status = buffer[4]; - status |= (unsigned short) buffer[5] << 8; - - if (pkt_len <= ENC_MAX_FRM_LEN) - copy_len = pkt_len; - else - copy_len = 0; - - if ((status & (1L << 7)) == 0) /* check Received Ok bit */ - copy_len = 0; - - /* taken from the Linux driver */ - /* check if next pointer is resonable */ - if ((((unsigned int)next_pointer_msb << 8) | - (unsigned int)next_pointer_lsb) >= ENC_TX_BUF_START) - copy_len = 0; - - if (copy_len > 0) { - m_nic_read_data (copy_len, buffer); - } - - /* advance read pointer to next pointer */ - m_nic_write (CTL_REG_ERDPTL, next_pointer_lsb); - m_nic_write (CTL_REG_ERDPTH, next_pointer_msb); - - /* decrease packet counter */ - m_nic_bfs (CTL_REG_ECON2, ENC_ECON2_PKTDEC); - - /* taken from the Linux driver */ - /* Only odd values should be written to ERXRDPTL, - * see errata B4 pt.13 - */ - rxbuf_rdpt = (next_pointer_msb << 8 | next_pointer_lsb) - 1; - if ((rxbuf_rdpt < (m_nic_read(CTL_REG_ERXSTH) << 8 | - m_nic_read(CTL_REG_ERXSTL))) || (rxbuf_rdpt > - (m_nic_read(CTL_REG_ERXNDH) << 8 | - m_nic_read(CTL_REG_ERXNDL)))) { - m_nic_write(CTL_REG_ERXRDPTL, m_nic_read(CTL_REG_ERXNDL)); - m_nic_write(CTL_REG_ERXRDPTH, m_nic_read(CTL_REG_ERXNDH)); - } else { - m_nic_write(CTL_REG_ERXRDPTL, rxbuf_rdpt & 0xFF); - m_nic_write(CTL_REG_ERXRDPTH, rxbuf_rdpt >> 8); - } - - /* move to bank 1 */ - m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL1); - m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL0); - - /* read pktcnt */ - pkt_cnt = m_nic_read (CTL_REG_EPKTCNT); - - /* switch to bank 0 */ - m_nic_bfc (CTL_REG_ECON1, - (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0)); - - if (copy_len == 0) { - eir_reg = m_nic_read (CTL_REG_EIR); - encReceiverReset (); - printf ("eth_rx: copy_len=0\n"); - continue; - } - - NetReceive ((unsigned char *) buffer, pkt_len); - - eir_reg = m_nic_read (CTL_REG_EIR); - } while (pkt_cnt); /* Use EPKTCNT not EIR.PKTIF flag, see errata pt. 6 */ -} - -static void encWriteReg (unsigned char regNo, unsigned char data) -{ - spi_lock (); - enc_cfg_spi (); - enc_enable (); - - spi_write (0x40 | regNo); /* write in regNo */ - spi_write (data); - - enc_disable (); - enc_enable (); - - spi_write (0x1f); /* write reg 0x1f */ - - enc_disable (); - spi_unlock (); -} - -static void encWriteRegRetry (unsigned char regNo, unsigned char data, int c) -{ - unsigned char readback; - int i; - - spi_lock (); - - for (i = 0; i < c; i++) { - enc_cfg_spi (); - enc_enable (); - - spi_write (0x40 | regNo); /* write in regNo */ - spi_write (data); - - enc_disable (); - enc_enable (); - - spi_write (0x1f); /* write reg 0x1f */ - - enc_disable (); - - spi_unlock (); /* we must unlock spi first */ - - readback = encReadReg (regNo); - - spi_lock (); - - if (readback == data) - break; - } - spi_unlock (); - - if (i == c) { - printf ("enc28j60: write reg %d failed\n", regNo); - } -} - -static unsigned char encReadReg (unsigned char regNo) -{ - unsigned char rxByte; - - spi_lock (); - enc_cfg_spi (); - enc_enable (); - - spi_write (0x1f); /* read reg 0x1f */ - - bank = spi_read () & 0x3; - - enc_disable (); - enc_enable (); - - spi_write (regNo); - rxByte = spi_read (); - - /* check if MAC or MII register */ - if (((bank == 2) && (regNo <= 0x1a)) || - ((bank == 3) && (regNo <= 0x05 || regNo == 0x0a))) { - /* ignore first byte and read another byte */ - rxByte = spi_read (); - } - - enc_disable (); - spi_unlock (); - - return rxByte; -} - -static void encReadBuff (unsigned short length, unsigned char *pBuff) -{ - spi_lock (); - enc_cfg_spi (); - enc_enable (); - - spi_write (0x20 | 0x1a); /* read buffer memory */ - - while (length--) { - if (pBuff != NULL) - *pBuff++ = spi_read (); - else - spi_write (0); - } - - enc_disable (); - spi_unlock (); -} - -static void encWriteBuff (unsigned short length, unsigned char *pBuff) -{ - spi_lock (); - enc_cfg_spi (); - enc_enable (); - - spi_write (0x60 | 0x1a); /* write buffer memory */ - - spi_write (0x00); /* control byte */ - - while (length--) - spi_write (*pBuff++); - - enc_disable (); - spi_unlock (); -} - -static void encBitSet (unsigned char regNo, unsigned char data) -{ - spi_lock (); - enc_cfg_spi (); - enc_enable (); - - spi_write (0x80 | regNo); /* bit field set */ - spi_write (data); - - enc_disable (); - spi_unlock (); -} - -static void encBitClr (unsigned char regNo, unsigned char data) -{ - spi_lock (); - enc_cfg_spi (); - enc_enable (); - - spi_write (0xA0 | regNo); /* bit field clear */ - spi_write (data); - - enc_disable (); - spi_unlock (); -} - -static void encReset (void) -{ - spi_lock (); - enc_cfg_spi (); - enc_enable (); - - spi_write (0xff); /* soft reset */ - - enc_disable (); - spi_unlock (); - - /* sleep 1 ms. See errata pt. 2 */ - udelay (1000); -} - -static void encInit (unsigned char *pEthAddr) -{ - unsigned short phid1 = 0; - unsigned short phid2 = 0; - - /* switch to bank 0 */ - m_nic_bfc (CTL_REG_ECON1, (ENC_ECON1_BSEL1 | ENC_ECON1_BSEL0)); - - /* - * Setup the buffer space. The reset values are valid for the - * other pointers. - */ - /* We shall not write to ERXST, see errata pt. 5. Instead we - have to make sure that ENC_RX_BUS_START is 0. */ - m_nic_write_retry (CTL_REG_ERXSTL, (ENC_RX_BUF_START & 0xFF), 1); - m_nic_write_retry (CTL_REG_ERXSTH, (ENC_RX_BUF_START >> 8), 1); - - /* taken from the Linux driver */ - m_nic_write_retry (CTL_REG_ERXNDL, (ENC_RX_BUF_END & 0xFF), 1); - m_nic_write_retry (CTL_REG_ERXNDH, (ENC_RX_BUF_END >> 8), 1); - - m_nic_write_retry (CTL_REG_ERDPTL, (ENC_RX_BUF_START & 0xFF), 1); - m_nic_write_retry (CTL_REG_ERDPTH, (ENC_RX_BUF_START >> 8), 1); - - next_pointer_lsb = (ENC_RX_BUF_START & 0xFF); - next_pointer_msb = (ENC_RX_BUF_START >> 8); - - /* verify identification */ - phid1 = phyRead (PHY_REG_PHID1); - phid2 = phyRead (PHY_REG_PHID2); - - if (phid1 != ENC_PHID1_VALUE - || (phid2 & ENC_PHID2_MASK) != ENC_PHID2_VALUE) { - printf ("ERROR: failed to identify controller\n"); - printf ("phid1 = %x, phid2 = %x\n", - phid1, (phid2 & ENC_PHID2_MASK)); - printf ("should be phid1 = %x, phid2 = %x\n", - ENC_PHID1_VALUE, ENC_PHID2_VALUE); - } - - /* - * --- MAC Initialization --- - */ - - /* Pull MAC out of Reset */ - - /* switch to bank 2 */ - m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0); - m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1); - - /* enable MAC to receive frames */ - /* added some bits from the Linux driver */ - m_nic_write_retry (CTL_REG_MACON1 - ,(ENC_MACON1_MARXEN | ENC_MACON1_TXPAUS | ENC_MACON1_RXPAUS) - ,10); - - /* configure pad, tx-crc and duplex */ - /* added a bit from the Linux driver */ - m_nic_write_retry (CTL_REG_MACON3 - ,(ENC_MACON3_PADCFG0 | ENC_MACON3_TXCRCEN | ENC_MACON3_FRMLNEN) - ,10); - - /* added 4 new lines from the Linux driver */ - /* Allow infinite deferals if the medium is continously busy */ - m_nic_write_retry(CTL_REG_MACON4, (1<<6) /*ENC_MACON4_DEFER*/, 10); - - /* Late collisions occur beyond 63 bytes */ - m_nic_write_retry(CTL_REG_MACLCON2, 63, 10); - - /* Set (low byte) Non-Back-to_Back Inter-Packet Gap. Recommended 0x12 */ - m_nic_write_retry(CTL_REG_MAIPGL, 0x12, 10); - - /* - * Set (high byte) Non-Back-to_Back Inter-Packet Gap. Recommended - * 0x0c for half-duplex. Nothing for full-duplex - */ - m_nic_write_retry(CTL_REG_MAIPGH, 0x0C, 10); - - /* set maximum frame length */ - m_nic_write_retry (CTL_REG_MAMXFLL, (ENC_MAX_FRM_LEN & 0xff), 10); - m_nic_write_retry (CTL_REG_MAMXFLH, (ENC_MAX_FRM_LEN >> 8), 10); - - /* - * Set MAC back-to-back inter-packet gap. Recommended 0x12 for half duplex - * and 0x15 for full duplex. - */ - m_nic_write_retry (CTL_REG_MABBIPG, 0x12, 10); - - /* set MAC address */ - - /* switch to bank 3 */ - m_nic_bfs (CTL_REG_ECON1, (ENC_ECON1_BSEL0 | ENC_ECON1_BSEL1)); - - m_nic_write_retry (CTL_REG_MAADR0, pEthAddr[5], 1); - m_nic_write_retry (CTL_REG_MAADR1, pEthAddr[4], 1); - m_nic_write_retry (CTL_REG_MAADR2, pEthAddr[3], 1); - m_nic_write_retry (CTL_REG_MAADR3, pEthAddr[2], 1); - m_nic_write_retry (CTL_REG_MAADR4, pEthAddr[1], 1); - m_nic_write_retry (CTL_REG_MAADR5, pEthAddr[0], 1); - - /* - * PHY Initialization taken from the Linux driver - */ - - /* Prevent automatic loopback of data beeing transmitted by setting - ENC_PHCON2_HDLDIS */ - phyWrite(PHY_REG_PHCON2, (1<<8)); - - /* LEDs configuration - * LEDA: LACFG = 0100 -> display link status - * LEDB: LBCFG = 0111 -> display TX & RX activity - * STRCH = 1 -> LED pulses - */ - phyWrite(PHY_REG_PHLCON, 0x0472); - - /* Reset PDPXMD-bit => half duplex */ - phyWrite(PHY_REG_PHCON1, 0); - - /* - * Receive settings - */ - -#ifdef CONFIG_USE_IRQ - /* enable interrupts */ - m_nic_bfs (CTL_REG_EIE, ENC_EIE_PKTIE); - m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXIE); - m_nic_bfs (CTL_REG_EIE, ENC_EIE_RXERIE); - m_nic_bfs (CTL_REG_EIE, ENC_EIE_TXERIE); - m_nic_bfs (CTL_REG_EIE, ENC_EIE_INTIE); -#endif -} - -/***************************************************************************** - * - * Description: - * Read PHY registers. - * - * NOTE! This function will change to Bank 2. - * - * Params: - * [in] addr address of the register to read - * - * Returns: - * The value in the register - */ -static unsigned short phyRead (unsigned char addr) -{ - unsigned short ret = 0; - - /* move to bank 2 */ - m_nic_bfc (CTL_REG_ECON1, ENC_ECON1_BSEL0); - m_nic_bfs (CTL_REG_ECON1, ENC_ECON1_BSEL1); - - /* write address to MIREGADR */ - m_nic_write (CTL_REG_MIREGADR, addr); - - /* set MICMD.MIIRD */ - m_nic_write (CTL_REG_MICMD, ENC_MICMD_MIIRD); - - /* taken from the Linux driver */ - /* move to bank 3 */ - m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0); - m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1); - - /* poll MISTAT.BUSY bit until operation is complete */ - while ((m_nic_read (CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) { - static int cnt = 0; - - if (cnt++ >= 1000) { - /* GJ - this seems extremely dangerous! */ - /* printf("#"); */ - cnt = 0; - } - } - - /* taken from the Linux driver */ - /* move to bank 2 */ - m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0); - m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1); - - /* clear MICMD.MIIRD */ - m_nic_write (CTL_REG_MICMD, 0); - - ret = (m_nic_read (CTL_REG_MIRDH) << 8); - ret |= (m_nic_read (CTL_REG_MIRDL) & 0xFF); - - return ret; -} - -/***************************************************************************** - * - * Taken from the Linux driver. - * Description: - * Write PHY registers. - * - * NOTE! This function will change to Bank 3. - * - * Params: - * [in] addr address of the register to write to - * [in] data to be written - * - * Returns: - * None - */ -static void phyWrite(unsigned char addr, unsigned short data) -{ - /* move to bank 2 */ - m_nic_bfc(CTL_REG_ECON1, ENC_ECON1_BSEL0); - m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1); - - /* write address to MIREGADR */ - m_nic_write(CTL_REG_MIREGADR, addr); - - m_nic_write(CTL_REG_MIWRL, data & 0xff); - m_nic_write(CTL_REG_MIWRH, data >> 8); - - /* move to bank 3 */ - m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL0); - m_nic_bfs(CTL_REG_ECON1, ENC_ECON1_BSEL1); - - /* poll MISTAT.BUSY bit until operation is complete */ - while((m_nic_read(CTL_REG_MISTAT) & ENC_MISTAT_BUSY) != 0) { - static int cnt = 0; - - if(cnt++ >= 1000) { - cnt = 0; - } - } -} |