diff options
| -rw-r--r-- | CHANGELOG | 44 | ||||
| -rw-r--r-- | README | 17 | ||||
| -rw-r--r-- | board/mpc8349ads/Makefile | 2 | ||||
| -rw-r--r-- | board/mpc8349ads/mpc8349ads.c | 41 | ||||
| -rw-r--r-- | board/mpc8349ads/pci.c | 260 | ||||
| -rw-r--r-- | common/cmd_bootm.c | 16 | ||||
| -rw-r--r-- | common/ft_build.c | 49 | ||||
| -rw-r--r-- | cpu/mpc83xx/cpu.c | 38 | ||||
| -rw-r--r-- | cpu/mpc83xx/cpu_init.c | 16 | ||||
| -rw-r--r-- | cpu/mpc83xx/interrupts.c | 10 | ||||
| -rw-r--r-- | cpu/mpc83xx/start.S | 6 | ||||
| -rw-r--r-- | include/configs/MPC8349ADS.h | 8 | ||||
| -rw-r--r-- | include/configs/TQM834x.h | 4 | ||||
| -rw-r--r-- | include/configs/stxxtc.h | 2 | ||||
| -rw-r--r-- | include/ft_build.h | 4 |
15 files changed, 452 insertions, 65 deletions
@@ -7,6 +7,34 @@ Changes since U-Boot 1.1.4: on which PCI controller its on Patch by Kumar Gala 12 Jan 2006 +* Add helper function for generic flat device tree fixups for mpc83xx + Patch by Kumar Gala 11 Jan 2006 + +* Add support for passing initrd information via flat device tree + Patch by Kumar Gala 11 Jan 2006 + +* Added OF_STDOUT_PATH and OF_SOC + + OF_STDOUT_PATH specifies the path to the device the kernel can use + for console output + + OF_SOC specifies the proper name of the SOC node if one exists. + Patch by Kumar Gala 11 Jan 2006 + +* Allow board code to fixup the flat device tree before booting a + kernel + Patch by Kumar Gala 11 Jan 2006 + +* Added CONFIG_ options for bd_t and env in flat dev tree + + CONFIG_OF_HAS_BD_T will put a copy of the bd_t + into the resulting flat device tree. + + CONFIG_OF_HAS_UBOOT_ENV will copy the environment + variables from u-boot into the flat device tree + + Patch by Kumar Gala 11 Jan 2006 + * Report back PCI bus when doing table based device config Patch by Kumar Gala 11 Jan 2006 @@ -20,6 +48,22 @@ Changes since U-Boot 1.1.4: the BAR into the normally memory region. Patch by Kumar Gala 11 Jan 2006 +* Only disable the MPC83xx watchdog if its enabled out of reset. + If its disabled out of reset SW can later enable it if so desired + Patch by Kumar Gala, 11 Jan 2006 + +* Allow config of GPIO direction & data registers at boot on 83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Enable time handling on 83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Make System IO Config Registers board configurable on MPC83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Added PCI support for MPC8349ADS board + Patch by Kumar Gala 11 Jan 2006 + * Add support for 28F256J3A flah (=> 64 MB) on PM520 board * Fix compiler problem with at91rm9200dk board. @@ -411,7 +411,24 @@ The following options need to be configured: The maximum size of the constructed OF tree. OF_CPU - The proper name of the cpus node. + OF_SOC - The proper name of the soc node. OF_TBCLK - The timebase frequency. + OF_STDOUT_PATH - The path to the console device + + CONFIG_OF_HAS_BD_T + + The resulting flat device tree will have a copy of the bd_t. + Space should be pre-allocated in the dts for the bd_t. + + CONFIG_OF_HAS_UBOOT_ENV + + The resulting flat device tree will have a copy of u-boot's + environment variables + + CONFIG_OF_BOARD_SETUP + + Board code has addition modification that it wants to make + to the flat device tree before handing it off to the kernel - Serial Ports: CFG_PL010_SERIAL diff --git a/board/mpc8349ads/Makefile b/board/mpc8349ads/Makefile index 4327b0d..f865f9c 100644 --- a/board/mpc8349ads/Makefile +++ b/board/mpc8349ads/Makefile @@ -24,7 +24,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a -OBJS := $(BOARD).o +OBJS := $(BOARD).o pci.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) diff --git a/board/mpc8349ads/mpc8349ads.c b/board/mpc8349ads/mpc8349ads.c index da8d3d7..505acbc 100644 --- a/board/mpc8349ads/mpc8349ads.c +++ b/board/mpc8349ads/mpc8349ads.c @@ -147,47 +147,6 @@ int checkboard (void) return 0; } -#if defined(CONFIG_PCI) -/* - * Initialize PCI Devices, report devices found - */ -#ifndef CONFIG_PCI_PNP -static struct pci_config_table pci_mpc83xxads_config_table[] = { - {PCI_ANY_ID,PCI_ANY_ID,PCI_ANY_ID,PCI_ANY_ID, - pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, - PCI_ENET0_MEMADDR, - PCI_COMMON_MEMORY | PCI_COMMAND_MASTER - } }, - {} -} -#endif - - -volatile static struct pci_controller hose[] = { - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc83xxads_config_table, -#endif - }, - { -#ifndef CONFIG_PCI_PNP - config_table:pci_mpc83xxads_config_table, -#endif - } -}; -#endif /* CONFIG_PCI */ - - -void -pci_init_board(void) -{ -#ifdef CONFIG_PCI - extern void pci_mpc83xx_init(volatile struct pci_controller *hose); - - pci_mpc83xx_init(hose); -#endif /* CONFIG_PCI */ -} - /* * if MPC8349ADS is soldered with SDRAM */ diff --git a/board/mpc8349ads/pci.c b/board/mpc8349ads/pci.c new file mode 100644 index 0000000..4c37984 --- /dev/null +++ b/board/mpc8349ads/pci.c @@ -0,0 +1,260 @@ +/* + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <asm/mmu.h> +#include <common.h> +#include <asm/global_data.h> +#include <pci.h> +#include <i2c.h> + +#ifdef CONFIG_PCI + +/* System RAM mapped to PCI space */ +#define CONFIG_PCI_SYS_MEM_BUS CFG_SDRAM_BASE +#define CONFIG_PCI_SYS_MEM_PHYS CFG_SDRAM_BASE + +#ifndef CONFIG_PCI_PNP +static struct pci_config_table pci_mpc83xxads_config_table[] = { + {PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, + PCI_IDSEL_NUMBER, PCI_ANY_ID, + pci_cfgfunc_config_device, {PCI_ENET0_IOADDR, + PCI_ENET0_MEMADDR, + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER + } + }, + {} +}; +#endif + +static struct pci_controller pci_hose[] = { + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxads_config_table, +#endif + }, + { +#ifndef CONFIG_PCI_PNP + config_table:pci_mpc83xxads_config_table, +#endif + } +}; + +/************************************************************************** + * + * pib_init() -- initialize the PCA9555PW IO expander on the PIB board + * + */ +void +pib_init(void) +{ + u8 val8; + /* + * Assign PIB PMC slot to desired PCI bus + */ + mpc8349_i2c = (i2c_t*)(CFG_IMMRBAR + CFG_I2C2_OFFSET); + i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE); + + val8 = 0; + i2c_write(0x23, 0x6, 1, &val8, 1); + i2c_write(0x23, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x23, 0x2, 1, &val8, 1); + i2c_write(0x23, 0x3, 1, &val8, 1); + + val8 = 0; + i2c_write(0x26, 0x6, 1, &val8, 1); + val8 = 0x34; + i2c_write(0x26, 0x7, 1, &val8, 1); +#if defined(PCI_64BIT) + val8 = 0xf4; /* PMC2:PCI1/64-bit */ +#elif defined(PCI_ALL_PCI1) + val8 = 0xf3; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */ +#elif defined(PCI_ONE_PCI1) + val8 = 0xf9; /* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */ +#else + val8 = 0xf5; /* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */ +#endif + i2c_write(0x26, 0x2, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x26, 0x3, 1, &val8, 1); + val8 = 0; + i2c_write(0x27, 0x6, 1, &val8, 1); + i2c_write(0x27, 0x7, 1, &val8, 1); + val8 = 0xff; + i2c_write(0x27, 0x2, 1, &val8, 1); + val8 = 0xef; + i2c_write(0x27, 0x3, 1, &val8, 1); + asm("eieio"); + +#if defined(PCI_64BIT) + printf("PCI1: 64-bit on PMC2\n"); +#elif defined(PCI_ALL_PCI1) + printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n"); +#elif defined(PCI_ONE_PCI1) + printf("PCI1: 32-bit on PMC1\n"); + printf("PCI2: 32-bit on PMC2, PMC3\n"); +#else + printf("PCI1: 32-bit on PMC1, PMC2\n"); + printf("PCI2: 32-bit on PMC3\n"); +#endif +} + +/************************************************************************** + * pci_init_board() + * + * NOTICE: PCI2 is not currently supported + * + */ +void +pci_init_board(void) +{ + DECLARE_GLOBAL_DATA_PTR; + volatile immap_t * immr; + volatile clk8349_t * clk; + volatile law8349_t * pci_law; + volatile pot8349_t * pci_pot; + volatile pcictrl8349_t * pci_ctrl; + volatile pciconf8349_t * pci_conf; + u16 reg16; + u32 reg32; + struct pci_controller * hose; + + immr = (immap_t *)CFG_IMMRBAR; + clk = (clk8349_t *)&immr->clk; + pci_law = immr->sysconf.pcilaw; + pci_pot = immr->ios.pot; + pci_ctrl = immr->pci_ctrl; + pci_conf = immr->pci_conf; + + hose = &pci_hose[0]; + + pib_init(); + + /* + * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode + */ + + reg32 = clk->occr; + udelay(2000); + clk->occr = 0xff000000; + udelay(2000); + + /* + * Release PCI RST Output signal + */ + pci_ctrl[0].gcr = 0; + udelay(2000); + pci_ctrl[0].gcr = 1; + udelay(2000); + + /* + * Configure PCI Local Access Windows + */ + pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR; + pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G; + + pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR; + pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M; + + /* + * Configure PCI Outbound Translation Windows + */ + + /* PCI1 mem space */ + pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK; + pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[0].pocmr = POCMR_EN | (POCMR_CM_512M & POCMR_CM_MASK); + + /* PCI1 IO space */ + pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK; + pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK; + pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_16M & POCMR_CM_MASK); + + /* + * Configure PCI Inbound Translation Windows + */ + + /* we need RAM mapped to PCI space for the devices to + * access main memory */ + pci_ctrl[0].pitar1 = 0x0; + pci_ctrl[0].pibar1 = 0x0; + pci_ctrl[0].piebar1 = 0x0; + pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | PIWAR_IWS_2G; + + hose->first_busno = 0; + hose->last_busno = 0xff; + + /* PCI memory space */ + pci_set_region(hose->regions + 0, + CFG_PCI1_MEM_BASE, + CFG_PCI1_MEM_PHYS, + CFG_PCI1_MEM_SIZE, + PCI_REGION_MEM); + + /* PCI IO space */ + pci_set_region(hose->regions + 1, + CFG_PCI1_IO_BASE, + CFG_PCI1_IO_PHYS, + CFG_PCI1_IO_SIZE, + PCI_REGION_IO); + + /* System memory space */ + pci_set_region(hose->regions + 2, + CONFIG_PCI_SYS_MEM_BUS, + CONFIG_PCI_SYS_MEM_PHYS, + gd->ram_size, + PCI_REGION_MEM | PCI_REGION_MEMORY); + + hose->region_count = 3; + + pci_setup_indirect(hose, + (CFG_IMMRBAR+0x8300), + (CFG_IMMRBAR+0x8304)); + + pci_register_hose(hose); + + /* + * Write to Command register + */ + reg16 = 0xff; + pci_hose_read_config_word (hose, PCI_BDF(0,0,0), PCI_COMMAND, + ®16); + reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; + pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_COMMAND, + reg16); + + /* + * Clear non-reserved bits in status register. + */ + pci_hose_write_config_word(hose, PCI_BDF(0,0,0), PCI_STATUS, + 0xffff); + pci_hose_write_config_byte(hose, PCI_BDF(0,0,0), PCI_LATENCY_TIMER, + 0x80); + +#ifdef CONFIG_PCI_SCAN_SHOW + printf("PCI: Bus Dev VenId DevId Class Int\n"); +#endif + /* + * Hose scan. + */ + hose->last_busno = pci_hose_scan(hose); +} +#endif /* CONFIG_PCI */ diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 8599a49..9562dbe 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -819,7 +819,7 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, (*kernel) (kbd, initrd_start, initrd_end, cmd_start, cmd_end); #else - ft_setup(of_flat_tree, OF_FLAT_TREE_MAX_SIZE, kbd); + ft_setup(of_flat_tree, OF_FLAT_TREE_MAX_SIZE, kbd, initrd_start, initrd_end); /* ft_dump_blob(of_flat_tree); */ #if defined(CFG_INIT_RAM_LOCK) && !defined(CONFIG_E500) @@ -828,12 +828,16 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, /* * Linux Kernel Parameters: * r3: ptr to OF flat tree, followed by the board info data - * r4: initrd_start or 0 if no initrd - * r5: initrd_end - unused if r4 is 0 - * r6: Start of command line string - * r7: End of command line string + * r4: physical pointer to the kernel itself + * r5: NULL + * r6: NULL + * r7: NULL */ - (*kernel) ((bd_t *)of_flat_tree, initrd_start, initrd_end, cmd_start, cmd_end); + if (getenv("disable_of") != NULL) + (*kernel) ((bd_t *)of_flat_tree, initrd_start, initrd_end, + cmd_start, cmd_end); + else + (*kernel) ((bd_t *)of_flat_tree, (ulong)kernel, 0, 0, 0); #endif } diff --git a/common/ft_build.c b/common/ft_build.c index 65a274f..9e9c906 100644 --- a/common/ft_build.c +++ b/common/ft_build.c @@ -163,7 +163,7 @@ void ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size) ((u64 *) cxt->pres)[0] = cpu_to_be64(physaddr); /* phys = 0, size = 0, terminate */ ((u64 *) cxt->pres)[1] = cpu_to_be64(size); - cxt->pres += 18; /* advance */ + cxt->pres += 16; /* advance */ ((u64 *) cxt->pres)[0] = 0; /* phys = 0, size = 0, terminate */ ((u64 *) cxt->pres)[1] = 0; @@ -529,6 +529,7 @@ extern uchar(*env_get_char) (int); #define BDM(x) { .name = #x, .offset = offsetof(bd_t, bi_ ##x ) } +#ifdef CONFIG_OF_HAS_BD_T static const struct { const char *name; int offset; @@ -574,19 +575,24 @@ static const struct { #endif BDM(baudrate), }; +#endif -void ft_setup(void *blob, int size, bd_t * bd) +void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_end) { - DECLARE_GLOBAL_DATA_PTR; - u8 *end; u32 *p; int len; struct ft_cxt cxt; - int i, k, nxt; - static char tmpenv[256]; - char *s, *lval, *rval; ulong clock; - uint32_t v; +#if defined(CONFIG_OF_HAS_UBOOT_ENV) + int k, nxt; +#endif +#if defined(CONFIG_OF_HAS_BD_T) + u8 *end; +#endif +#if defined(CONFIG_OF_HAS_UBOOT_ENV) || defined(CONFIG_OF_HAS_BD_T) + int i; + static char tmpenv[256]; +#endif /* disable OF tree; booting old kernel */ if (getenv("disable_of") != NULL) { @@ -596,7 +602,8 @@ void ft_setup(void *blob, int size, bd_t * bd) ft_begin(&cxt, blob, size); - /* fs_add_rsvmap not used */ + if (initrd_start && initrd_end) + ft_add_rsvmap(&cxt, initrd_start, initrd_end - initrd_start + 1); ft_begin_tree(&cxt); @@ -610,9 +617,12 @@ void ft_setup(void *blob, int size, bd_t * bd) /* back into root */ ft_backtrack_node(&cxt); +#ifdef CONFIG_OF_HAS_UBOOT_ENV ft_begin_node(&cxt, "u-boot-env"); for (i = 0; env_get_char(i) != '\0'; i = nxt + 1) { + char *s, *lval, *rval; + for (nxt = i; env_get_char(nxt) != '\0'; ++nxt) ; s = tmpenv; for (k = i; k < nxt && s < &tmpenv[sizeof(tmpenv) - 1]; ++k) @@ -629,12 +639,20 @@ void ft_setup(void *blob, int size, bd_t * bd) } ft_end_node(&cxt); +#endif ft_begin_node(&cxt, "chosen"); ft_prop_str(&cxt, "name", "chosen"); ft_prop_str(&cxt, "bootargs", getenv("bootargs")); ft_prop_int(&cxt, "linux,platform", 0x600); /* what is this? */ + if (initrd_start && initrd_end) { + ft_prop_int(&cxt, "linux,initrd-start", initrd_start); + ft_prop_int(&cxt, "linux,initrd-end", initrd_end); + } +#ifdef OF_STDOUT_PATH + ft_prop_str(&cxt, "linux,stdout-path", OF_STDOUT_PATH); +#endif ft_end_node(&cxt); @@ -647,14 +665,19 @@ void ft_setup(void *blob, int size, bd_t * bd) ft_dump_blob(blob); */ +#ifdef CONFIG_OF_HAS_BD_T /* paste the bd_t at the end of the flat tree */ end = (char *)blob + be32_to_cpu(((struct boot_param_header *)blob)->totalsize); memcpy(end, bd, sizeof(*bd)); +#endif #ifdef CONFIG_PPC +#ifdef CONFIG_OF_HAS_BD_T for (i = 0; i < sizeof(bd_map)/sizeof(bd_map[0]); i++) { + uint32_t v; + sprintf(tmpenv, "/bd_t/%s", bd_map[i].name); v = *(uint32_t *)((char *)bd + bd_map[i].offset); @@ -670,6 +693,7 @@ void ft_setup(void *blob, int size, bd_t * bd) p = ft_get_prop(blob, "/bd_t/ethspeed", &len); if (p != NULL) *p = cpu_to_be32((uint32_t) bd->bi_ethspeed); +#endif clock = bd->bi_intfreq; p = ft_get_prop(blob, "/cpus/" OF_CPU "/clock-frequency", &len); @@ -680,11 +704,14 @@ void ft_setup(void *blob, int size, bd_t * bd) clock = OF_TBCLK; p = ft_get_prop(blob, "/cpus/" OF_CPU "/timebase-frequency", &len); if (p != NULL) - *p = cpu_to_be32(OF_TBCLK); + *p = cpu_to_be32(clock); #endif - #endif /* __powerpc__ */ +#ifdef CONFIG_OF_BOARD_SETUP + ft_board_setup(blob, bd); +#endif + /* printf("final OF-tree\n"); ft_dump_blob(blob); diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index 8c9b515..e49e4fe 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -35,6 +35,7 @@ #include <watchdog.h> #include <command.h> #include <mpc83xx.h> +#include <ft_build.h> #include <asm/processor.h> @@ -151,3 +152,40 @@ void watchdog_reset (void) hang(); /* FIXME: implement watchdog_reset()? */ } #endif /* CONFIG_WATCHDOG */ + +#if defined(CONFIG_OF_FLAT_TREE) +void +ft_cpu_setup(void *blob, bd_t *bd) +{ + u32 *p; + int len; + ulong clock; + + clock = bd->bi_busfreq; + p = ft_get_prop(blob, "/cpus/" OF_CPU "/bus-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + + p = ft_get_prop(blob, "/" OF_SOC "/bus-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + + p = ft_get_prop(blob, "/" OF_SOC "/serial@4500/clock-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + + p = ft_get_prop(blob, "/" OF_SOC "/serial@4600/clock-frequency", &len); + if (p != NULL) + *p = cpu_to_be32(clock); + +#ifdef CONFIG_MPC83XX_TSEC1 + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/address", &len); + memcpy(p, bd->bi_enetaddr, 6); +#endif + +#ifdef CONFIG_MPC83XX_TSEC2 + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/address", &len); + memcpy(p, bd->bi_enet1addr, 6); +#endif +} +#endif diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index dcb3445..db28a6a 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -63,8 +63,12 @@ void cpu_init_f (volatile immap_t * im) im->sysconf.spcr |= SPCR_TBEN; /* System General Purpose Register */ - im->sysconf.sicrh = SICRH_TSOBI1; - im->sysconf.sicrl = SICRL_LDP_A; +#ifdef CFG_SICRH + im->sysconf.sicrh = CFG_SICRH; +#endif +#ifdef CFG_SICRL + im->sysconf.sicrl = CFG_SICRL; +#endif /* * Memory Controller: @@ -150,6 +154,14 @@ void cpu_init_f (volatile immap_t * im) im->sysconf.lblaw[7].bar = CFG_LBLAWBAR7_PRELIM; im->sysconf.lblaw[7].ar = CFG_LBLAWAR7_PRELIM; #endif +#ifdef CFG_GPIO1_PRELIM + im->pgio[0].dir = CFG_GPIO1_DIR; + im->pgio[0].dat = CFG_GPIO1_DAT; +#endif +#ifdef CFG_GPIO2_PRELIM + im->pgio[1].dir = CFG_GPIO2_DIR; + im->pgio[1].dat = CFG_GPIO2_DAT; +#endif } diff --git a/cpu/mpc83xx/interrupts.c b/cpu/mpc83xx/interrupts.c index 53474f6..dfd51c1 100644 --- a/cpu/mpc83xx/interrupts.c +++ b/cpu/mpc83xx/interrupts.c @@ -43,6 +43,16 @@ struct irq_action { int interrupt_init_cpu (unsigned *decrementer_count) { + DECLARE_GLOBAL_DATA_PTR; + + volatile immap_t *immr = (immap_t *) CFG_IMMRBAR; + + *decrementer_count = (gd->bus_clk / 4) / CFG_HZ; + + /* Enable e300 time base */ + + immr->sysconf.spcr |= 0x00400000; + return 0; } diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S index fb001a6..0e1a5fd 100644 --- a/cpu/mpc83xx/start.S +++ b/cpu/mpc83xx/start.S @@ -426,8 +426,14 @@ init_e300_core: /* time t 10 */ #else /* Disable Wathcdog */ /*-------------------*/ + lwz r4, SWCRR(r3) + /* Check to see if its enabled for disabling + once disabled by SW you can't re-enable */ + andi. r4, r4, 0x4 + beq 1f xor r4, r4, r4 stw r4, SWCRR(r3) +1: #endif /* CONFIG_WATCHDOG */ /* Initialize the Hardware Implementation-dependent Registers */ diff --git a/include/configs/MPC8349ADS.h b/include/configs/MPC8349ADS.h index d6d2fab..7197e0f 100644 --- a/include/configs/MPC8349ADS.h +++ b/include/configs/MPC8349ADS.h @@ -41,9 +41,7 @@ #define CONFIG_MPC8349 1 /* MPC8349 specific */ #define CONFIG_MPC8349ADS 1 /* MPC8349ADS board specific */ -/* FIXME: Real PCI support will come in a follow-up update. */ -#undef CONFIG_PCI - +#define CONFIG_PCI #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE @@ -506,6 +504,10 @@ HRCWH_TSEC2M_IN_GMII ) #endif +/* System IO Config */ +#define CFG_SICRH SICRH_TSOBI1 +#define CFG_SICRL SICRL_LDP_A + #define CFG_HID0_INIT 0x000000000 #define CFG_HID0_FINAL CFG_HID0_INIT diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 41f44c5..1cf66a9 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -417,6 +417,10 @@ extern int tqm834x_num_flash_banks; HRCWH_TSEC2M_IN_GMII ) #endif +/* System IO Config */ +#define CFG_SICRH SICRH_TSOBI1 +#define CFG_SICRL SICRL_LDP_A + /* i-cache and d-cache disabled */ #define CFG_HID0_INIT 0x000000000 #define CFG_HID0_FINAL CFG_HID0_INIT diff --git a/include/configs/stxxtc.h b/include/configs/stxxtc.h index 3ffe6b2..be6c36c 100644 --- a/include/configs/stxxtc.h +++ b/include/configs/stxxtc.h @@ -584,5 +584,7 @@ typedef unsigned int led_id_t; #define OF_CPU "PowerPC,MPC870@0" #define OF_TBCLK (MPC8XX_HZ / 16) +#define CONFIG_OF_HAS_BD_T 1 +#define CONFIG_OF_HAS_UBOOT_ENV 1 #endif /* __CONFIG_H */ diff --git a/include/ft_build.h b/include/ft_build.h index 9104b1a..47ca575 100644 --- a/include/ft_build.h +++ b/include/ft_build.h @@ -57,10 +57,12 @@ void ft_prop_int(struct ft_cxt *cxt, const char *name, int val); void ft_begin(struct ft_cxt *cxt, void *blob, int max_size); void ft_add_rsvmap(struct ft_cxt *cxt, u64 physaddr, u64 size); -void ft_setup(void *blob, int size, bd_t * bd); +void ft_setup(void *blob, int size, bd_t * bd, ulong initrd_start, ulong initrd_end); void ft_dump_blob(const void *bphp); void ft_merge_blob(struct ft_cxt *cxt, void *blob); void *ft_get_prop(void *bphp, const char *propname, int *szp); +void ft_board_setup(void *blob, bd_t *bd); + #endif |