diff options
| -rw-r--r-- | arch/arm/include/asm/arch-mx6/mx6sl_pins.h | 4 | ||||
| -rw-r--r-- | board/freescale/mx6slevk/mx6slevk.c | 39 | ||||
| -rw-r--r-- | drivers/i2c/mxc_i2c.c | 14 |
3 files changed, 56 insertions, 1 deletions
diff --git a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h index 90cc965..0e8419c 100644 --- a/arch/arm/include/asm/arch-mx6/mx6sl_pins.h +++ b/arch/arm/include/asm/arch-mx6/mx6sl_pins.h @@ -57,7 +57,8 @@ enum { MX6_PAD_I2C1_SDA__GPIO_3_13 = IOMUX_PAD(0x0450, 0x0160, 5, 0x0000, 0, 0), MX6_PAD_I2C1_SCL__I2C1_SCL = IOMUX_PAD(0x044C, 0x015C, 0x10, 0x071C, 2, 0), MX6_PAD_I2C1_SCL__GPIO_3_12 = IOMUX_PAD(0x044C, 0x015C, 5, 0x0000, 0, 0), - + MX6_PAD_EPDC_PWRCTRL2__GPIO_2_9 = IOMUX_PAD(0x03DC, 0x00EC, 5, 0x0000, 0, 0), + MX6_PAD_EPDC_PWRCTRL3__GPIO_2_10 = IOMUX_PAD(0x03E0, 0x00F0, 5, 0x0000, 0, 0), MX6_PAD_EPDC_PWRSTAT__GPIO_2_13 = IOMUX_PAD(0x03E8, 0x00F8, 5, 0x0000, 0, 0), MX6_PAD_EPDC_VCOM0__GPIO_2_3 = IOMUX_PAD(0x0410, 0x0120, 5, 0x0000, 0, 0), MX6_PAD_EPDC_PWRWAKEUP__GPIO_2_14 = IOMUX_PAD(0x03EC, 0x00FC, 5, 0x0000, 0, 0), @@ -116,6 +117,7 @@ enum { MX6_PAD_KEY_COL4__USB_USBOTG1_PWR = IOMUX_PAD(0x0484, 0x017C, 6, 0x0000, 0, 0), MX6_PAD_KEY_COL5__USB_USBOTG2_PWR = IOMUX_PAD(0x0488, 0x0180, 6, 0x0000, 0, 0), + MX6_PAD_KEY_COL6__GPIO_4_4 = IOMUX_PAD(0x048C, 0x0184, 5, 0x0000, 0, 0), MX6_PAD_ECSPI1_MISO__ECSPI1_MISO = IOMUX_PAD(0x0358, 0x0068, 0, 0x0684, 0, 0), MX6_PAD_ECSPI1_MOSI__ECSPI1_MOSI = IOMUX_PAD(0x035C, 0x006C, 0, 0x0688, 0, 0), MX6_PAD_ECSPI1_SCLK__ECSPI1_SCLK = IOMUX_PAD(0x0360, 0x0070, 0, 0x067C, 0, 0), diff --git a/board/freescale/mx6slevk/mx6slevk.c b/board/freescale/mx6slevk/mx6slevk.c index 9ff49b4..1c511cf 100644 --- a/board/freescale/mx6slevk/mx6slevk.c +++ b/board/freescale/mx6slevk/mx6slevk.c @@ -60,6 +60,8 @@ DECLARE_GLOBAL_DATA_PTR; PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \ PAD_CTL_ODE | PAD_CTL_SRE_FAST) +#define ELAN_INTR_PAD_CTRL (PAD_CTL_PUS_47K_UP | PAD_CTL_HYS) + #define EPDC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_SPEED_MED | \ PAD_CTL_DSE_40ohm | PAD_CTL_HYS) @@ -149,6 +151,12 @@ static iomux_v3_cfg_t const fec_pads[] = { MX6_PAD_FEC_TX_CLK__GPIO_4_21 | MUX_PAD_CTRL(NO_PAD_CTRL), }; +static iomux_v3_cfg_t const elan_pads[] = { + MX6_PAD_EPDC_PWRCTRL2__GPIO_2_9 | MUX_PAD_CTRL(NO_PAD_CTRL), + MX6_PAD_EPDC_PWRCTRL3__GPIO_2_10 | MUX_PAD_CTRL(ELAN_INTR_PAD_CTRL), + MX6_PAD_KEY_COL6__GPIO_4_4 | MUX_PAD_CTRL(EPDC_PAD_CTRL), +}; + static iomux_v3_cfg_t const epdc_enable_pads[] = { MX6_PAD_EPDC_D0__EPDC_SDDO_0 | MUX_PAD_CTRL(EPDC_PAD_CTRL), MX6_PAD_EPDC_D1__EPDC_SDDO_1 | MUX_PAD_CTRL(EPDC_PAD_CTRL), @@ -853,6 +861,36 @@ int board_init(void) return 0; } +void setup_elan_pads(void) +{ +#define TOUCH_CS IMX_GPIO_NR(2, 9) +#define TOUCH_INT IMX_GPIO_NR(2, 10) +#define TOUCH_RST IMX_GPIO_NR(4, 4) + imx_iomux_v3_setup_multiple_pads(elan_pads, ARRAY_SIZE(elan_pads)); +} + +void elan_init(void) +{ + gpio_direction_input(TOUCH_INT); + gpio_direction_output(TOUCH_CS , 1); + gpio_set_value(TOUCH_CS, 0); + gpio_direction_output(TOUCH_RST , 1); + gpio_set_value(TOUCH_RST, 0); + mdelay(10); + gpio_set_value(TOUCH_RST, 1); + gpio_set_value(TOUCH_CS, 1); + mdelay(100); +} + +/* + * This function overwrite the function defined in + * drivers/i2c/mxc_i2c.c, which is a weak symbol + */ +void i2c_force_reset_slave(void) +{ + elan_init(); +} + int board_late_init(void) { int ret = 0; @@ -860,6 +898,7 @@ int board_late_init(void) #ifdef CONFIG_SYS_I2C_MXC setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); + setup_elan_pads(); ret = setup_pmic_voltages(); if (ret) return -1; diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index 595019b..9334838 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -238,6 +238,17 @@ static void i2c_imx_stop(struct mxc_i2c_regs *i2c_regs) } /* + * Stub implementations for outer i2c slave operations + * Any board has special requirement (i.mx6slevk) can + * overwrite the function + */ +void __i2c_force_reset_slave(void) +{ +} +void i2c_force_reset_slave(void) + __attribute__((weak, alias("__i2c_force_reset_slave"))); + +/* * Send start signal, chip address and * write register address */ @@ -247,6 +258,9 @@ static int i2c_init_transfer_(struct mxc_i2c_regs *i2c_regs, unsigned int temp; int ret; + /* Reset i2c slave */ + i2c_force_reset_slave(); + /* Enable I2C controller */ #ifdef I2C_QUIRK_REG if (readb(&i2c_regs->i2cr) & I2CR_IDIS) { |