diff options
| -rw-r--r-- | board/freescale/p1022ds/Makefile | 2 | ||||
| -rw-r--r-- | board/freescale/p1022ds/diu.c | 110 | ||||
| -rw-r--r-- | include/configs/P1022DS.h | 13 |
3 files changed, 120 insertions, 5 deletions
diff --git a/board/freescale/p1022ds/Makefile b/board/freescale/p1022ds/Makefile index 8ede2d6..678eb2a 100644 --- a/board/freescale/p1022ds/Makefile +++ b/board/freescale/p1022ds/Makefile @@ -16,6 +16,8 @@ COBJS-y += ddr.o COBJS-y += law.o COBJS-y += tlb.o +COBJS-$(CONFIG_FSL_DIU_FB) += diu.o + SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) SOBJS := $(addprefix $(obj),$(SOBJS)) diff --git a/board/freescale/p1022ds/diu.c b/board/freescale/p1022ds/diu.c new file mode 100644 index 0000000..5ca84df --- /dev/null +++ b/board/freescale/p1022ds/diu.c @@ -0,0 +1,110 @@ +/* + * Copyright 2010 Freescale Semiconductor, Inc. + * Authors: Timur Tabi <timur@freescale.com> + * + * FSL DIU Framebuffer driver + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include <common.h> +#include <command.h> +#include <asm/io.h> +#include <stdio_dev.h> +#include <video_fb.h> +#include "../common/ngpixis.h" +#include <fsl_diu_fb.h> + +#define PX_BRDCFG0_ELBC_DIU 0x02 + +#define PX_BRDCFG1_DVIEN 0x80 +#define PX_BRDCFG1_DFPEN 0x40 +#define PX_BRDCFG1_BACKLIGHT 0x20 + +/* + * DIU Area Descriptor + * + * Note that we need to byte-swap the value before it's written to the AD + * register. So even though the registers don't look like they're in the same + * bit positions as they are on the MPC8610, the same value is written to the + * AD register on the MPC8610 and on the P1022. + */ +#define AD_BYTE_F 0x10000000 +#define AD_ALPHA_C_SHIFT 25 +#define AD_BLUE_C_SHIFT 23 +#define AD_GREEN_C_SHIFT 21 +#define AD_RED_C_SHIFT 19 +#define AD_PIXEL_S_SHIFT 16 +#define AD_COMP_3_SHIFT 12 +#define AD_COMP_2_SHIFT 8 +#define AD_COMP_1_SHIFT 4 +#define AD_COMP_0_SHIFT 0 + +void diu_set_pixel_clock(unsigned int pixclock) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + unsigned long speed_ccb, temp; + u32 pixval; + + speed_ccb = get_bus_freq(0); + temp = 1000000000 / pixclock; + temp *= 1000; + pixval = speed_ccb / temp; + debug("DIU pixval = %lu\n", pixval); + + /* Modify PXCLK in GUTS CLKDVDR */ + temp = in_be32(&gur->clkdvdr) & 0x2000FFFF; + out_be32(&gur->clkdvdr, temp); /* turn off clock */ + out_be32(&gur->clkdvdr, temp | 0x80000000 | ((pixval & 0x1F) << 16)); +} + +int platform_diu_init(unsigned int *xres, unsigned int *yres) +{ + ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + char *monitor_port; + u32 pixel_format; + u8 temp; + + pixel_format = cpu_to_le32(AD_BYTE_F | (3 << AD_ALPHA_C_SHIFT) | + (0 << AD_BLUE_C_SHIFT) | (1 << AD_GREEN_C_SHIFT) | + (2 << AD_RED_C_SHIFT) | (8 << AD_COMP_3_SHIFT) | + (8 << AD_COMP_2_SHIFT) | (8 << AD_COMP_1_SHIFT) | + (8 << AD_COMP_0_SHIFT) | (3 << AD_PIXEL_S_SHIFT)); + + temp = in_8(&pixis->brdcfg1); + + monitor_port = getenv("monitor"); + if (!strncmp(monitor_port, "1", 1)) { /* 1 - Single link LVDS */ + *xres = 1024; + *yres = 768; + /* Enable the DFP port, disable the DVI and the backlight */ + temp &= ~(PX_BRDCFG1_DVIEN | PX_BRDCFG1_BACKLIGHT); + temp |= PX_BRDCFG1_DFPEN; + } else { /* DVI */ + *xres = 1280; + *yres = 1024; + /* Enable the DVI port, disable the DFP and the backlight */ + temp &= ~(PX_BRDCFG1_DFPEN | PX_BRDCFG1_BACKLIGHT); + temp |= PX_BRDCFG1_DVIEN; + } + + out_8(&pixis->brdcfg1, temp); + + /* + * Route the LAD pins to the DIU. This will disable access to the eLBC, + * which means we won't be able to read/write any NOR flash addresses! + */ + out_8(&pixis->brdcfg0, in_8(&pixis->brdcfg0) | PX_BRDCFG0_ELBC_DIU); + /* we must do the dummy read from eLBC to sync the write as above */ + in_8(&pixis->brdcfg0); + + /* Setting PMUXCR to switch to DVI from ELBC */ + /* Set pmuxcr to allow both i2c1 and i2c2 */ + clrsetbits_be32(&gur->pmuxcr, 0xc0000000, 0x40000000); + in_be32(&gur->pmuxcr); + + return fsl_diu_init(*xres, pixel_format, 0); +} diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index dcaca2b..8e0117f 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -177,14 +177,17 @@ #define CONFIG_SYS_HUSH_PARSER #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " -#define CONFIG_FSL_DIU_FB -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) - /* Video */ -/* #define CONFIG_VIDEO */ -#ifdef CONFIG_VIDEO +#undef CONFIG_FSL_DIU_FB + +#ifdef CONFIG_FSL_DIU_FB +#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000) +#define CONFIG_VIDEO +#define CONFIG_CMD_BMP #define CONFIG_CFB_CONSOLE #define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_VIDEO_LOGO +#define CONFIG_VIDEO_BMP_LOGO #endif /* |