diff options
26 files changed, 47 insertions, 74 deletions
diff --git a/arch/arm/cpu/arm1136/mx31/devices.c b/arch/arm/cpu/arm1136/mx31/devices.c index b42dac3..2ebee2e 100644 --- a/arch/arm/cpu/arm1136/mx31/devices.c +++ b/arch/arm/cpu/arm1136/mx31/devices.c @@ -27,7 +27,6 @@ #include <asm/arch/imx-regs.h> #include <asm/arch/clock.h> -#ifdef CONFIG_SYS_MX31_UART1 void mx31_uart1_hw_init(void) { /* setup pins for UART1 */ @@ -36,9 +35,7 @@ void mx31_uart1_hw_init(void) mx31_gpio_mux(MUX_RTS1__UART1_RTS_B); mx31_gpio_mux(MUX_CTS1__UART1_CTS_B); } -#endif -#ifdef CONFIG_SYS_MX31_UART2 void mx31_uart2_hw_init(void) { /* setup pins for UART2 */ @@ -47,7 +44,6 @@ void mx31_uart2_hw_init(void) mx31_gpio_mux(MUX_RTS2__UART2_RTS_B); mx31_gpio_mux(MUX_CTS2__UART2_CTS_B); } -#endif #ifdef CONFIG_MXC_SPI /* diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h index eece138..7f9449b 100644 --- a/arch/arm/include/asm/arch-mx25/imx-regs.h +++ b/arch/arm/include/asm/arch-mx25/imx-regs.h @@ -180,8 +180,8 @@ struct aips_regs { #define IMX_I2C3_BASE (0x43F84000) #define IMX_CAN1_BASE (0x43F88000) #define IMX_CAN2_BASE (0x43F8C000) -#define IMX_UART1_BASE (0x43F90000) -#define IMX_UART2_BASE (0x43F94000) +#define UART1_BASE (0x43F90000) +#define UART2_BASE (0x43F94000) #define IMX_I2C2_BASE (0x43F98000) #define IMX_OWIRE_BASE (0x43F9C000) #define IMX_CSPI1_BASE (0x43FA4000) @@ -197,15 +197,15 @@ struct aips_regs { /* SPBA */ #define IMX_SPBA_BASE (0x50000000) #define IMX_CSPI3_BASE (0x50004000) -#define IMX_UART4_BASE (0x50008000) -#define IMX_UART3_BASE (0x5000C000) +#define UART4_BASE (0x50008000) +#define UART3_BASE (0x5000C000) #define IMX_CSPI2_BASE (0x50010000) #define IMX_SSI2_BASE (0x50014000) #define IMX_ESAI_BASE (0x50018000) #define IMX_ATA_DMA_BASE (0x50020000) #define IMX_SIM1_BASE (0x50024000) #define IMX_SIM2_BASE (0x50028000) -#define IMX_UART5_BASE (0x5002C000) +#define UART5_BASE (0x5002C000) #define IMX_TSC_BASE (0x50030000) #define IMX_SSI1_BASE (0x50034000) #define IMX_FEC_BASE (0x50038000) diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h index 83ab216..ced5b2a 100644 --- a/arch/arm/include/asm/arch-mx27/imx-regs.h +++ b/arch/arm/include/asm/arch-mx27/imx-regs.h @@ -224,10 +224,10 @@ struct fuse_bank0_regs { #define IMX_TIM1_BASE (0x03000 + IMX_IO_BASE) #define IMX_TIM2_BASE (0x04000 + IMX_IO_BASE) #define IMX_TIM3_BASE (0x05000 + IMX_IO_BASE) -#define IMX_UART1_BASE (0x0a000 + IMX_IO_BASE) -#define IMX_UART2_BASE (0x0b000 + IMX_IO_BASE) -#define IMX_UART3_BASE (0x0c000 + IMX_IO_BASE) -#define IMX_UART4_BASE (0x0d000 + IMX_IO_BASE) +#define UART1_BASE (0x0a000 + IMX_IO_BASE) +#define UART2_BASE (0x0b000 + IMX_IO_BASE) +#define UART3_BASE (0x0c000 + IMX_IO_BASE) +#define UART4_BASE (0x0d000 + IMX_IO_BASE) #define IMX_I2C1_BASE (0x12000 + IMX_IO_BASE) #define IMX_GPIO_BASE (0x15000 + IMX_IO_BASE) #define IMX_TIM4_BASE (0x19000 + IMX_IO_BASE) diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h index 0147920..6a517dd 100644 --- a/arch/arm/include/asm/arch-mx31/imx-regs.h +++ b/arch/arm/include/asm/arch-mx31/imx-regs.h @@ -600,6 +600,12 @@ struct esdc_regs { #define WEIM_ESDCFG1 0xB800100C #define WEIM_ESDMISC 0xB8001010 +#define UART1_BASE 0x43F90000 +#define UART2_BASE 0x43F94000 +#define UART3_BASE 0x5000C000 +#define UART4_BASE 0x43FB0000 +#define UART5_BASE 0x43FB4000 + #define ESDCTL_SDE (1 << 31) #define ESDCTL_CMD_RW (0 << 28) #define ESDCTL_CMD_PRECHARGE (1 << 28) diff --git a/arch/arm/include/asm/arch-mx35/imx-regs.h b/arch/arm/include/asm/arch-mx35/imx-regs.h index 25c324e..df74508 100644 --- a/arch/arm/include/asm/arch-mx35/imx-regs.h +++ b/arch/arm/include/asm/arch-mx35/imx-regs.h @@ -42,8 +42,8 @@ #define I2C_BASE_ADDR 0x43F80000 #define I2C3_BASE_ADDR 0x43F84000 #define ATA_BASE_ADDR 0x43F8C000 -#define UART1_BASE_ADDR 0x43F90000 -#define UART2_BASE_ADDR 0x43F94000 +#define UART1_BASE 0x43F90000 +#define UART2_BASE 0x43F94000 #define I2C2_BASE_ADDR 0x43F98000 #define CSPI1_BASE_ADDR 0x43FA4000 #define IOMUXC_BASE_ADDR 0x43FAC000 @@ -52,7 +52,7 @@ * SPBA */ #define SPBA_BASE_ADDR 0x50000000 -#define UART3_BASE_ADDR 0x5000C000 +#define UART3_BASE 0x5000C000 #define CSPI2_BASE_ADDR 0x50010000 #define ATA_DMA_BASE_ADDR 0x50020000 #define FEC_BASE_ADDR 0x50038000 diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h index d069209..0ee88d2 100644 --- a/arch/arm/include/asm/arch-mx5/imx-regs.h +++ b/arch/arm/include/asm/arch-mx5/imx-regs.h @@ -54,7 +54,7 @@ */ #define MMC_SDHC1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00004000) #define MMC_SDHC2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00008000) -#define UART3_BASE_ADDR (SPBA0_BASE_ADDR + 0x0000C000) +#define UART3_BASE (SPBA0_BASE_ADDR + 0x0000C000) #define CSPI1_BASE_ADDR (SPBA0_BASE_ADDR + 0x00010000) #define SSI2_BASE_ADDR (SPBA0_BASE_ADDR + 0x00014000) #define MMC_SDHC3_BASE_ADDR (SPBA0_BASE_ADDR + 0x00020000) @@ -83,8 +83,8 @@ #define EPIT2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B0000) #define PWM1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B4000) #define PWM2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000B8000) -#define UART1_BASE_ADDR (AIPS1_BASE_ADDR + 0x000BC000) -#define UART2_BASE_ADDR (AIPS1_BASE_ADDR + 0x000C0000) +#define UART1_BASE (AIPS1_BASE_ADDR + 0x000BC000) +#define UART2_BASE (AIPS1_BASE_ADDR + 0x000C0000) #define SRC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D0000) #define CCM_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D4000) #define GPC_BASE_ADDR (AIPS1_BASE_ADDR + 0x000D8000) diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index dcb4bd1..af00b9c 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -24,41 +24,12 @@ #define __REG(x) (*((volatile u32 *)(x))) -#if defined(CONFIG_SYS_MX31_UART1) || defined(CONFIG_SYS_MX25_UART1) -#define UART_PHYS 0x43f90000 -#elif defined(CONFIG_SYS_MX31_UART2) || defined(CONFIG_SYS_MX25_UART2) -#define UART_PHYS 0x43f94000 -#elif defined(CONFIG_SYS_MX31_UART3) || defined(CONFIG_SYS_MX25_UART3) -#define UART_PHYS 0x5000c000 -#elif defined(CONFIG_SYS_MX31_UART4) || defined(CONFIG_SYS_MX25_UART4) -#define UART_PHYS 0x43fb0000 -#elif defined(CONFIG_SYS_MX31_UART5) || defined(CONFIG_SYS_MX25_UART5) -#define UART_PHYS 0x43fb4000 -#elif defined(CONFIG_SYS_MX27_UART1) -#define UART_PHYS 0x1000a000 -#elif defined(CONFIG_SYS_MX27_UART2) -#define UART_PHYS 0x1000b000 -#elif defined(CONFIG_SYS_MX27_UART3) -#define UART_PHYS 0x1000c000 -#elif defined(CONFIG_SYS_MX27_UART4) -#define UART_PHYS 0x1000d000 -#elif defined(CONFIG_SYS_MX27_UART5) -#define UART_PHYS 0x1001b000 -#elif defined(CONFIG_SYS_MX27_UART6) -#define UART_PHYS 0x1001c000 -#elif defined(CONFIG_SYS_MX35_UART1) || defined(CONFIG_SYS_MX51_UART1) || \ - defined(CONFIG_SYS_MX53_UART1) -#define UART_PHYS UART1_BASE_ADDR -#elif defined(CONFIG_SYS_MX35_UART2) || defined(CONFIG_SYS_MX51_UART2) || \ - defined(CONFIG_SYS_MX53_UART2) -#define UART_PHYS UART2_BASE_ADDR -#elif defined(CONFIG_SYS_MX35_UART3) || defined(CONFIG_SYS_MX51_UART3) || \ - defined(CONFIG_SYS_MX53_UART3) -#define UART_PHYS UART3_BASE_ADDR -#else -#error "define CONFIG_SYS_MXxx_UARTx to use the MXC UART driver" +#ifndef CONFIG_MXC_UART_BASE +#error "define CONFIG_MXC_UART_BASE to use the MXC UART driver" #endif +#define UART_PHYS CONFIG_MXC_UART_BASE + #ifdef CONFIG_SERIAL_MULTI #warning "MXC driver does not support MULTI serials." #endif diff --git a/include/configs/efikamx.h b/include/configs/efikamx.h index a07c8b5..2b069d6 100644 --- a/include/configs/efikamx.h +++ b/include/configs/efikamx.h @@ -85,7 +85,7 @@ * Hardware drivers */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX51_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONS_INDEX 1 #define CONFIG_BAUDRATE 115200 #define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} diff --git a/include/configs/flea3.h b/include/configs/flea3.h index d88c578..20100c2 100644 --- a/include/configs/flea3.h +++ b/include/configs/flea3.h @@ -77,7 +77,7 @@ * UART (console) */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX35_UART3 +#define CONFIG_MXC_UART_BASE UART3_BASE /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index 6953a80..2af4e7a 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -102,7 +102,7 @@ * Serial Driver info */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX27_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/imx31_litekit.h b/include/configs/imx31_litekit.h index 1455ea2..bbcbce1 100644 --- a/include/configs/imx31_litekit.h +++ b/include/configs/imx31_litekit.h @@ -63,8 +63,8 @@ * Hardware drivers */ -#define CONFIG_MXC_UART 1 -#define CONFIG_SYS_MX31_UART1 1 +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_MXC_GPIO #define CONFIG_HARD_SPI 1 diff --git a/include/configs/imx31_phycore.h b/include/configs/imx31_phycore.h index 1b75197..3153eb5 100644 --- a/include/configs/imx31_phycore.h +++ b/include/configs/imx31_phycore.h @@ -59,7 +59,7 @@ #define CONFIG_SYS_I2C_SLAVE 0xfe #define CONFIG_MXC_UART -#define CONFIG_SYS_MX31_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/mx25pdk.h b/include/configs/mx25pdk.h index 8414376..d1ba02b 100644 --- a/include/configs/mx25pdk.h +++ b/include/configs/mx25pdk.h @@ -54,7 +54,7 @@ /* Serial Info */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX25_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/mx31ads.h b/include/configs/mx31ads.h index 7e011ae..87638a4 100644 --- a/include/configs/mx31ads.h +++ b/include/configs/mx31ads.h @@ -60,8 +60,8 @@ * Hardware drivers */ -#define CONFIG_MXC_UART 1 -#define CONFIG_SYS_MX31_UART1 1 +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_HARD_SPI 1 #define CONFIG_MXC_SPI 1 diff --git a/include/configs/mx31pdk.h b/include/configs/mx31pdk.h index 4253c3e..4da6020 100644 --- a/include/configs/mx31pdk.h +++ b/include/configs/mx31pdk.h @@ -61,7 +61,7 @@ */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX31_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_HW_WATCHDOG #define CONFIG_MXC_GPIO diff --git a/include/configs/mx35pdk.h b/include/configs/mx35pdk.h index 32ed609..0c62b9f 100644 --- a/include/configs/mx35pdk.h +++ b/include/configs/mx35pdk.h @@ -85,7 +85,7 @@ * UART (console) */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX35_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h index 7c7544f..dd53f48 100644 --- a/include/configs/mx51evk.h +++ b/include/configs/mx51evk.h @@ -59,7 +59,7 @@ * Hardware drivers */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX51_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_MXC_GPIO /* diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h index 15dfcb4..f48a41e 100644 --- a/include/configs/mx53ard.h +++ b/include/configs/mx53ard.h @@ -44,7 +44,7 @@ #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART -#define CONFIG_SYS_MX53_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE /* I2C Configs */ #define CONFIG_CMD_I2C diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h index 7c49136..11fe6ef 100644 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@ -47,7 +47,7 @@ #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART -#define CONFIG_SYS_MX53_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE /* I2C Configs */ #define CONFIG_CMD_I2C diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h index d699010..537649e 100644 --- a/include/configs/mx53loco.h +++ b/include/configs/mx53loco.h @@ -45,7 +45,7 @@ #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART -#define CONFIG_SYS_MX53_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE /* MMC Configs */ #define CONFIG_FSL_ESDHC diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h index 48b32dd..032f722 100644 --- a/include/configs/mx53smd.h +++ b/include/configs/mx53smd.h @@ -44,7 +44,7 @@ #define CONFIG_MXC_GPIO #define CONFIG_MXC_UART -#define CONFIG_SYS_MX53_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE /* I2C Configs */ #define CONFIG_CMD_I2C diff --git a/include/configs/qong.h b/include/configs/qong.h index 3346802..3e36bb0 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -49,8 +49,8 @@ * Hardware drivers */ -#define CONFIG_MXC_UART 1 -#define CONFIG_SYS_MX31_UART1 1 +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_MXC_GPIO #define CONFIG_HW_WATCHDOG diff --git a/include/configs/tt01.h b/include/configs/tt01.h index 6ef25cd..a553712 100644 --- a/include/configs/tt01.h +++ b/include/configs/tt01.h @@ -148,7 +148,7 @@ * make sure that the transceiver is enabled during PL=1 for testing! */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX31_UART2 +#define CONFIG_MXC_UART_BASE UART2_BASE #define CONFIG_MXC_SPI #define CONFIG_MXC_GPIO diff --git a/include/configs/tx25.h b/include/configs/tx25.h index f77c546..87bd8a6 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -90,7 +90,7 @@ * Serial Info */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX25_UART1 +#define CONFIG_MXC_UART_BASE UART1_BASE #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } diff --git a/include/configs/vision2.h b/include/configs/vision2.h index f321ad2..35b71f7 100644 --- a/include/configs/vision2.h +++ b/include/configs/vision2.h @@ -54,7 +54,7 @@ * Hardware drivers */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX51_UART3 +#define CONFIG_MXC_UART_BASE UART3_BASE #define CONFIG_MXC_GPIO #define CONFIG_MXC_SPI #define CONFIG_HW_WATCHDOG diff --git a/include/configs/zmx25.h b/include/configs/zmx25.h index 9a7a27a..599d5bb 100644 --- a/include/configs/zmx25.h +++ b/include/configs/zmx25.h @@ -66,7 +66,7 @@ * Serial */ #define CONFIG_MXC_UART -#define CONFIG_SYS_MX25_UART2 +#define CONFIG_MXC_UART_BASE UART2_BASE #define CONFIG_CONS_INDEX 1 /* use UART2 for console */ #define CONFIG_BAUDRATE 115200 /* Default baud rate */ #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |