diff options
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rw-r--r-- | board/gdsys/405ex/405ex.c | 250 | ||||
| -rw-r--r-- | board/gdsys/405ex/405ex.h | 10 | ||||
| -rw-r--r-- | board/gdsys/405ex/Makefile | 53 | ||||
| -rw-r--r-- | board/gdsys/405ex/chip_config.c | 96 | ||||
| -rw-r--r-- | board/gdsys/405ex/io64.c | 384 | ||||
| -rw-r--r-- | board/gdsys/common/Makefile | 1 | ||||
| -rw-r--r-- | board/gdsys/common/miiphybb.c | 58 | ||||
| -rw-r--r-- | boards.cfg | 1 | ||||
| -rw-r--r-- | include/configs/io64.h | 566 | ||||
| -rw-r--r-- | include/gdsys_fpga.h | 19 |
11 files changed, 1431 insertions, 8 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index c68842e..7c21981 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -150,6 +150,7 @@ Dirk Eibach <eibach@gdsys.de> gdppc440etx PPC440EP/GR intip PPC460EX io PPC405EP + io64 PPC405EX iocon PPC405EP neo PPC405EP diff --git a/board/gdsys/405ex/405ex.c b/board/gdsys/405ex/405ex.c new file mode 100644 index 0000000..0d25214 --- /dev/null +++ b/board/gdsys/405ex/405ex.c @@ -0,0 +1,250 @@ +#include <common.h> +#include <asm/ppc4xx.h> +#include <asm/ppc405.h> +#include <asm/processor.h> +#include <asm/io.h> + +#include <gdsys_fpga.h> + +#include "405ex.h" + +#define REFLECTION_TESTPATTERN 0xdede +#define REFLECTION_TESTPATTERN_INV (~REFLECTION_TESTPATTERN & 0xffff) + +DECLARE_GLOBAL_DATA_PTR; + +int get_fpga_state(unsigned dev) +{ + return gd->fpga_state[dev]; +} + +void print_fpga_state(unsigned dev) +{ + if (gd->fpga_state[dev] & FPGA_STATE_DONE_FAILED) + puts(" Waiting for FPGA-DONE timed out.\n"); + if (gd->fpga_state[dev] & FPGA_STATE_REFLECTION_FAILED) + puts(" FPGA reflection test failed.\n"); +} + +int board_early_init_f(void) +{ + u32 val; + + /*--------------------------------------------------------------------+ + | Interrupt controller setup + +--------------------------------------------------------------------+ + +---------------------------------------------------------------------+ + |Interrupt| Source | Pol. | Sensi.| Crit. | + +---------+-----------------------------------+-------+-------+-------+ + | IRQ 00 | UART0 | High | Level | Non | + | IRQ 01 | UART1 | High | Level | Non | + | IRQ 02 | IIC0 | High | Level | Non | + | IRQ 03 | TBD | High | Level | Non | + | IRQ 04 | TBD | High | Level | Non | + | IRQ 05 | EBM | High | Level | Non | + | IRQ 06 | BGI | High | Level | Non | + | IRQ 07 | IIC1 | Rising| Edge | Non | + | IRQ 08 | SPI | High | Lvl/ed| Non | + | IRQ 09 | External IRQ 0 - (PCI-Express) | pgm H | Pgm | Non | + | IRQ 10 | MAL TX EOB | High | Level | Non | + | IRQ 11 | MAL RX EOB | High | Level | Non | + | IRQ 12 | DMA Channel 0 FIFO Full | High | Level | Non | + | IRQ 13 | DMA Channel 0 Stat FIFO | High | Level | Non | + | IRQ 14 | DMA Channel 1 FIFO Full | High | Level | Non | + | IRQ 15 | DMA Channel 1 Stat FIFO | High | Level | Non | + | IRQ 16 | PCIE0 AL | high | Level | Non | + | IRQ 17 | PCIE0 VPD access | rising| Edge | Non | + | IRQ 18 | PCIE0 hot reset request | rising| Edge | Non | + | IRQ 19 | PCIE0 hot reset request | faling| Edge | Non | + | IRQ 20 | PCIE0 TCR | High | Level | Non | + | IRQ 21 | PCIE0 MSI level0 | High | Level | Non | + | IRQ 22 | PCIE0 MSI level1 | High | Level | Non | + | IRQ 23 | Security EIP-94 | High | Level | Non | + | IRQ 24 | EMAC0 interrupt | High | Level | Non | + | IRQ 25 | EMAC1 interrupt | High | Level | Non | + | IRQ 26 | PCIE0 MSI level2 | High | Level | Non | + | IRQ 27 | External IRQ 4 | pgm H | Pgm | Non | + | IRQ 28 | UIC2 Non-critical Int. | High | Level | Non | + | IRQ 29 | UIC2 Critical Interrupt | High | Level | Crit. | + | IRQ 30 | UIC1 Non-critical Int. | High | Level | Non | + | IRQ 31 | UIC1 Critical Interrupt | High | Level | Crit. | + |---------------------------------------------------------------------- + | IRQ 32 | MAL Serr | High | Level | Non | + | IRQ 33 | MAL Txde | High | Level | Non | + | IRQ 34 | MAL Rxde | High | Level | Non | + | IRQ 35 | PCIE0 bus master VC0 |falling| Edge | Non | + | IRQ 36 | PCIE0 DCR Error | High | Level | Non | + | IRQ 37 | EBC | High |Lvl Edg| Non | + | IRQ 38 | NDFC | High | Level | Non | + | IRQ 39 | GPT Compare Timer 8 | Risin | Edge | Non | + | IRQ 40 | GPT Compare Timer 9 | Risin | Edge | Non | + | IRQ 41 | PCIE1 AL | high | Level | Non | + | IRQ 42 | PCIE1 VPD access | rising| edge | Non | + | IRQ 43 | PCIE1 hot reset request | rising| Edge | Non | + | IRQ 44 | PCIE1 hot reset request | faling| Edge | Non | + | IRQ 45 | PCIE1 TCR | High | Level | Non | + | IRQ 46 | PCIE1 bus master VC0 |falling| Edge | Non | + | IRQ 47 | GPT Compare Timer 3 | Risin | Edge | Non | + | IRQ 48 | GPT Compare Timer 4 | Risin | Edge | Non | + | IRQ 49 | Ext. IRQ 7 |pgm/Fal|pgm/Lvl| Non | + | IRQ 50 | Ext. IRQ 8 - |pgm (H)|pgm/Lvl| Non | + | IRQ 51 | Ext. IRQ 9 |pgm (H)|pgm/Lvl| Non | + | IRQ 52 | GPT Compare Timer 5 | high | Edge | Non | + | IRQ 53 | GPT Compare Timer 6 | high | Edge | Non | + | IRQ 54 | GPT Compare Timer 7 | high | Edge | Non | + | IRQ 55 | Serial ROM | High | Level | Non | + | IRQ 56 | GPT Decrement Pulse | High | Level | Non | + | IRQ 57 | Ext. IRQ 2 |pgm/Fal|pgm/Lvl| Non | + | IRQ 58 | Ext. IRQ 5 |pgm/Fal|pgm/Lvl| Non | + | IRQ 59 | Ext. IRQ 6 |pgm/Fal|pgm/Lvl| Non | + | IRQ 60 | EMAC0 Wake-up | High | Level | Non | + | IRQ 61 | Ext. IRQ 1 |pgm/Fal|pgm/Lvl| Non | + | IRQ 62 | EMAC1 Wake-up | High | Level | Non | + |---------------------------------------------------------------------- + | IRQ 64 | PE0 AL | High | Level | Non | + | IRQ 65 | PE0 VPD Access | Risin | Edge | Non | + | IRQ 66 | PE0 Hot Reset Request | Risin | Edge | Non | + | IRQ 67 | PE0 Hot Reset Request | Falli | Edge | Non | + | IRQ 68 | PE0 TCR | High | Level | Non | + | IRQ 69 | PE0 BusMaster VCO | Falli | Edge | Non | + | IRQ 70 | PE0 DCR Error | High | Level | Non | + | IRQ 71 | Reserved | N/A | N/A | Non | + | IRQ 72 | PE1 AL | High | Level | Non | + | IRQ 73 | PE1 VPD Access | Risin | Edge | Non | + | IRQ 74 | PE1 Hot Reset Request | Risin | Edge | Non | + | IRQ 75 | PE1 Hot Reset Request | Falli | Edge | Non | + | IRQ 76 | PE1 TCR | High | Level | Non | + | IRQ 77 | PE1 BusMaster VCO | Falli | Edge | Non | + | IRQ 78 | PE1 DCR Error | High | Level | Non | + | IRQ 79 | Reserved | N/A | N/A | Non | + | IRQ 80 | PE2 AL | High | Level | Non | + | IRQ 81 | PE2 VPD Access | Risin | Edge | Non | + | IRQ 82 | PE2 Hot Reset Request | Risin | Edge | Non | + | IRQ 83 | PE2 Hot Reset Request | Falli | Edge | Non | + | IRQ 84 | PE2 TCR | High | Level | Non | + | IRQ 85 | PE2 BusMaster VCO | Falli | Edge | Non | + | IRQ 86 | PE2 DCR Error | High | Level | Non | + | IRQ 87 | Reserved | N/A | N/A | Non | + | IRQ 88 | External IRQ(5) | Progr | Progr | Non | + | IRQ 89 | External IRQ 4 - Ethernet | Progr | Progr | Non | + | IRQ 90 | External IRQ 3 - PCI-X | Progr | Progr | Non | + | IRQ 91 | External IRQ 2 - PCI-X | Progr | Progr | Non | + | IRQ 92 | External IRQ 1 - PCI-X | Progr | Progr | Non | + | IRQ 93 | External IRQ 0 - PCI-X | Progr | Progr | Non | + | IRQ 94 | Reserved | N/A | N/A | Non | + | IRQ 95 | Reserved | N/A | N/A | Non | + |--------------------------------------------------------------------- + +---------+-----------------------------------+-------+-------+------*/ + /*--------------------------------------------------------------------+ + | Initialise UIC registers. Clear all interrupts. Disable all + | interrupts. + | Set critical interrupt values. Set interrupt polarities. Set + | interrupt trigger levels. Make bit 0 High priority. Clear all + | interrupts again. + +-------------------------------------------------------------------*/ + + mtdcr(UIC2SR, 0xffffffff); /* Clear all interrupts */ + mtdcr(UIC2ER, 0x00000000); /* disable all interrupts */ + mtdcr(UIC2CR, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr(UIC2PR, 0xf7ffffff); /* Set Interrupt Polarities */ + mtdcr(UIC2TR, 0x01e1fff8); /* Set Interrupt Trigger Levels */ + mtdcr(UIC2VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr(UIC2SR, 0x00000000); /* clear all interrupts */ + mtdcr(UIC2SR, 0xffffffff); /* clear all interrupts */ + + mtdcr(UIC1SR, 0xffffffff); /* Clear all interrupts */ + mtdcr(UIC1ER, 0x00000000); /* disable all interrupts */ + mtdcr(UIC1CR, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr(UIC1PR, 0xfffac785); /* Set Interrupt Polarities */ + mtdcr(UIC1TR, 0x001d0040); /* Set Interrupt Trigger Levels */ + mtdcr(UIC1VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr(UIC1SR, 0x00000000); /* clear all interrupts */ + mtdcr(UIC1SR, 0xffffffff); /* clear all interrupts */ + + mtdcr(UIC0SR, 0xffffffff); /* Clear all interrupts */ + mtdcr(UIC0ER, 0x0000000a); /* Disable all interrupts */ + /* Except cascade UIC0 and UIC1 */ + mtdcr(UIC0CR, 0x00000000); /* Set Critical / Non Critical interrupts */ + mtdcr(UIC0PR, 0xffbfefef); /* Set Interrupt Polarities */ + mtdcr(UIC0TR, 0x00007000); /* Set Interrupt Trigger Levels */ + mtdcr(UIC0VR, 0x00000001); /* Set Vect base=0,INT31 Highest priority */ + mtdcr(UIC0SR, 0x00000000); /* clear all interrupts */ + mtdcr(UIC0SR, 0xffffffff); /* clear all interrupts */ + + /* + * Note: Some cores are still in reset when the chip starts, so + * take them out of reset + */ + mtsdr(SDR0_SRST, 0); + + /* + * Configure PFC (Pin Function Control) registers + */ + val = SDR0_PFC1_GPT_FREQ; + mtsdr(SDR0_PFC1, val); + + return 0; +} + +int board_early_init_r(void) +{ + unsigned k; + unsigned ctr; + + for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) + gd->fpga_state[k] = 0; + + /* + * reset FPGA + */ + gd405ex_init(); + + gd405ex_set_fpga_reset(1); + + gd405ex_setup_hw(); + + for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) { + ctr = 0; + while (!gd405ex_get_fpga_done(k)) { + udelay(100000); + if (ctr++ > 5) { + gd->fpga_state[k] |= FPGA_STATE_DONE_FAILED; + break; + } + } + } + + udelay(10); + + gd405ex_set_fpga_reset(0); + + for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) { + ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(k); +#ifdef CONFIG_SYS_FPGA_NO_RFL_HI + u16 *reflection_target = &fpga->reflection_low; +#else + u16 *reflection_target = &fpga->reflection_high; +#endif + /* + * wait for fpga out of reset + */ + ctr = 0; + while (1) { + out_le16(&fpga->reflection_low, + REFLECTION_TESTPATTERN); + + if (in_le16(reflection_target) == + REFLECTION_TESTPATTERN_INV) + break; + + udelay(100000); + if (ctr++ > 5) { + gd->fpga_state[k] |= + FPGA_STATE_REFLECTION_FAILED; + break; + } + } + } + + return 0; +} diff --git a/board/gdsys/405ex/405ex.h b/board/gdsys/405ex/405ex.h new file mode 100644 index 0000000..b15623f --- /dev/null +++ b/board/gdsys/405ex/405ex.h @@ -0,0 +1,10 @@ +#ifndef __405EX_H_ +#define __405EX_H_ + +/* functions to be provided by board implementation */ +void gd405ex_init(void); +void gd405ex_set_fpga_reset(unsigned state); +void gd405ex_setup_hw(void); +int gd405ex_get_fpga_done(unsigned fpga); + +#endif /* __405EX_H_ */ diff --git a/board/gdsys/405ex/Makefile b/board/gdsys/405ex/Makefile new file mode 100644 index 0000000..4549705 --- /dev/null +++ b/board/gdsys/405ex/Makefile @@ -0,0 +1,53 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-$(CONFIG_IO64) += io64.o + +COBJS-$(CONFIG_CMD_CHIP_CONFIG) += chip_config.o + +COBJS := $(BOARD).o $(COBJS-y) + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/gdsys/405ex/chip_config.c b/board/gdsys/405ex/chip_config.c new file mode 100644 index 0000000..12cb3bf --- /dev/null +++ b/board/gdsys/405ex/chip_config.c @@ -0,0 +1,96 @@ +/* + * (C) Copyright 2009 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> +#include <asm/ppc4xx_config.h> + +/* NAND booting versions differ in bytes: 6, 8, 9, 11, 12 */ + +struct ppc4xx_config ppc4xx_config_val[] = { + { + "333-nor", "NOR CPU: 333 PLB: 166 OPB: 83 EBC: 83", + { + 0x8c, 0x12, 0xec, 0x12, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "400-133-nor", "NOR CPU: 400 PLB: 133 OPB: 66 EBC: 66", + { + 0x8e, 0x0e, 0xe8, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "400-200-66-nor", "NOR CPU: 400 PLB: 200 OPB: 66 EBC: 66", + { + 0x8e, 0x0e, 0xe8, 0x12, 0xd8, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "400-nor", "NOR CPU: 400 PLB: 200 OPB: 100 EBC: 100", + { + 0x8e, 0x0e, 0xe8, 0x12, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "533-nor", "NOR CPU: 533 PLB: 177 OPB: 88 EBC: 88", + { + 0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "533-nand", "NOR CPU: 533 PLB: 177 OPB: 88 EBC: 88", + { + 0x8e, 0x43, 0x60, 0x13, 0x98, 0x00, 0x0f, 0x00, + 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 + } + }, + { + "600-nor", "NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100", + { + 0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, + { + "600-nand", "NOR CPU: 600 PLB: 200 OPB: 100 EBC: 100", + { + 0x8d, 0x02, 0x34, 0x13, 0x98, 0x00, 0x0f, 0x00, + 0xa0, 0x68, 0x23, 0x58, 0x0d, 0x05, 0x00, 0x00 + } + }, + { + "666-nor", "NOR CPU: 666 PLB: 222 OPB: 111 EBC: 111", + { + 0x8d, 0x03, 0x78, 0x13, 0x98, 0x00, 0x0a, 0x00, + 0x40, 0x08, 0x23, 0x50, 0x00, 0x05, 0x00, 0x00 + } + }, +}; + +int ppc4xx_config_count = ARRAY_SIZE(ppc4xx_config_val); diff --git a/board/gdsys/405ex/io64.c b/board/gdsys/405ex/io64.c new file mode 100644 index 0000000..a997571 --- /dev/null +++ b/board/gdsys/405ex/io64.c @@ -0,0 +1,384 @@ +/* + * (C) Copyright 2010 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * based on kilauea.c + * by Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/ppc4xx.h> +#include <asm/ppc405.h> +#include <libfdt.h> +#include <fdt_support.h> +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/ppc4xx-gpio.h> +#include <flash.h> + +#include <pca9698.h> + +#include "405ex.h" +#include <gdsys_fpga.h> + +#include <miiphy.h> +#include <i2c.h> +#include <dtt.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define PHYREG_CONTROL 0 +#define PHYREG_PAGE_ADDRESS 22 +#define PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1 16 +#define PHYREG_PG2_COPPER_SPECIFIC_CONTROL_2 26 +#define PHYREG_PG2_MAC_SPECIFIC_STATUS_1 17 +#define PHYREG_PG2_MAC_SPECIFIC_CONTROL 21 + +#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE) +#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100) +#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200) +#define LATCH3_BASE (CONFIG_SYS_LATCH_BASE + 0x300) + +enum { + UNITTYPE_CCD_SWITCH = 1, +}; + +enum { + HWVER_100 = 0, + HWVER_110 = 1, +}; + +static inline void blank_string(int size) +{ + int i; + + for (i = 0; i < size; i++) + putc('\b'); + for (i = 0; i < size; i++) + putc(' '); + for (i = 0; i < size; i++) + putc('\b'); +} + +/* + * Board early initialization function + */ +int misc_init_r(void) +{ + /* startup fans */ + dtt_init(); + +#ifdef CONFIG_ENV_IS_IN_FLASH + /* Monitor protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + -CONFIG_SYS_MONITOR_LEN, + 0xffffffff, + &flash_info[0]); +#endif + + return 0; +} + +static void print_fpga_info(unsigned dev) +{ + ihs_fpga_t *fpga = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(dev); + u16 versions = in_le16(&fpga->versions); + u16 fpga_version = in_le16(&fpga->fpga_version); + u16 fpga_features = in_le16(&fpga->fpga_features); + int fpga_state = get_fpga_state(dev); + + unsigned unit_type; + unsigned hardware_version; + unsigned feature_channels; + unsigned feature_expansion; + + printf("FPGA%d: ", dev); + if (fpga_state & FPGA_STATE_PLATFORM) + printf("(legacy) "); + + if (fpga_state & FPGA_STATE_DONE_FAILED) { + printf(" done timed out\n"); + return; + } + + if (fpga_state & FPGA_STATE_REFLECTION_FAILED) { + printf(" refelectione test failed\n"); + return; + } + + unit_type = (versions & 0xf000) >> 12; + hardware_version = versions & 0x000f; + feature_channels = fpga_features & 0x007f; + feature_expansion = fpga_features & (1<<15); + + switch (unit_type) { + case UNITTYPE_CCD_SWITCH: + printf("CCD-Switch"); + break; + + default: + printf("UnitType %d(not supported)", unit_type); + break; + } + + switch (hardware_version) { + case HWVER_100: + printf(" HW-Ver 1.00\n"); + break; + + case HWVER_110: + printf(" HW-Ver 1.10\n"); + break; + + default: + printf(" HW-Ver %d(not supported)\n", + hardware_version); + break; + } + + printf(" FPGA V %d.%02d, features:", + fpga_version / 100, fpga_version % 100); + + printf(" %d channel(s)", feature_channels); + + printf(", expansion %ssupported\n", feature_expansion ? "" : "un"); +} + +int checkboard(void) +{ + char *s = getenv("serial#"); + + printf("Board: CATCenter Io64\n"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + + return 0; +} + +int configure_gbit_phy(char *bus, unsigned char addr) +{ + unsigned short value; + + /* select page 0 */ + if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0000)) + goto err_out; + /* switch to powerdown */ + if (miiphy_read(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, + &value)) + goto err_out; + if (miiphy_write(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, + value | 0x0004)) + goto err_out; + /* select page 2 */ + if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0002)) + goto err_out; + /* disable SGMII autonegotiation */ + if (miiphy_write(bus, addr, PHYREG_PG2_MAC_SPECIFIC_CONTROL, 48)) + goto err_out; + /* select page 0 */ + if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0000)) + goto err_out; + /* switch from powerdown to normal operation */ + if (miiphy_read(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, + &value)) + goto err_out; + if (miiphy_write(bus, addr, PHYREG_PG0_COPPER_SPECIFIC_CONTROL_1, + value & ~0x0004)) + goto err_out; + /* reset phy so settings take effect */ + if (miiphy_write(bus, addr, PHYREG_CONTROL, 0x9140)) + goto err_out; + + return 0; + +err_out: + printf("Error writing to the PHY addr=%02x\n", addr); + return -1; +} + +int verify_gbit_phy(char *bus, unsigned char addr) +{ + unsigned short value; + + /* select page 2 */ + if (miiphy_write(bus, addr, PHYREG_PAGE_ADDRESS, 0x0002)) + goto err_out; + /* verify SGMII link status */ + if (miiphy_read(bus, addr, PHYREG_PG2_MAC_SPECIFIC_STATUS_1, &value)) + goto err_out; + if (!(value & (1 << 10))) + return -2; + + return 0; + +err_out: + printf("Error writing to the PHY addr=%02x\n", addr); + return -1; +} + +int last_stage_init(void) +{ + unsigned int k; + unsigned int fpga; + ihs_fpga_t *fpga0 = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(0); + ihs_fpga_t *fpga1 = (ihs_fpga_t *) CONFIG_SYS_FPGA_BASE(1); + int failed = 0; + char str_phys[] = "Setup PHYs -"; + char str_serdes[] = "Start SERDES blocks"; + char str_channels[] = "Start FPGA channels"; + char str_locks[] = "Verify SERDES locks"; + char str_status[] = "Verify PHY status -"; + char slash[] = "\\|/-\\|/-"; + + print_fpga_info(0); + print_fpga_info(1); + + /* setup Gbit PHYs */ + puts("TRANS: "); + puts(str_phys); + miiphy_register(CONFIG_SYS_GBIT_MII_BUSNAME, + bb_miiphy_read, bb_miiphy_write); + + for (k = 0; k < 32; ++k) { + configure_gbit_phy(CONFIG_SYS_GBIT_MII_BUSNAME, k); + putc('\b'); + putc(slash[k % 8]); + } + + miiphy_register(CONFIG_SYS_GBIT_MII1_BUSNAME, + bb_miiphy_read, bb_miiphy_write); + + for (k = 0; k < 32; ++k) { + configure_gbit_phy(CONFIG_SYS_GBIT_MII1_BUSNAME, k); + putc('\b'); + putc(slash[k % 8]); + } + blank_string(strlen(str_phys)); + + /* take fpga serdes blocks out of reset */ + puts(str_serdes); + udelay(500000); + out_le16(&fpga0->quad_serdes_reset, 0); + out_le16(&fpga1->quad_serdes_reset, 0); + blank_string(strlen(str_serdes)); + + /* take channels out of reset */ + puts(str_channels); + udelay(500000); + for (fpga = 0; fpga < 2; ++fpga) { + u16 *ch0_config_int = &(fpga ? fpga1 : fpga0)->ch0_config_int; + for (k = 0; k < 32; ++k) + out_le16(ch0_config_int + 4 * k, 0); + } + blank_string(strlen(str_channels)); + + /* verify channels serdes lock */ + puts(str_locks); + udelay(500000); + for (fpga = 0; fpga < 2; ++fpga) { + u16 *ch0_status_int = &(fpga ? fpga1 : fpga0)->ch0_status_int; + for (k = 0; k < 32; ++k) { + u16 status = in_le16(ch0_status_int + 4*k); + if (!(status & (1 << 4))) { + failed = 1; + printf("fpga %d channel %d: no serdes lock\n", + fpga, k); + } + /* reset events */ + out_le16(ch0_status_int + 4*k, status); + } + } + blank_string(strlen(str_locks)); + + /* verify phy status */ + puts(str_status); + for (k = 0; k < 32; ++k) { + if (verify_gbit_phy(CONFIG_SYS_GBIT_MII_BUSNAME, k)) { + printf("verify baseboard phy %d failed\n", k); + failed = 1; + } + putc('\b'); + putc(slash[k % 8]); + } + for (k = 0; k < 32; ++k) { + if (verify_gbit_phy(CONFIG_SYS_GBIT_MII1_BUSNAME, k)) { + printf("verify extensionboard phy %d failed\n", k); + failed = 1; + } + putc('\b'); + putc(slash[k % 8]); + } + blank_string(strlen(str_status)); + + printf("Starting 64 channels %s\n", failed ? "failed" : "ok"); + + return 0; +} + +void gd405ex_init(void) +{ + unsigned int k; + + if (i2c_probe(0x22)) { /* i2c_probe returns 0 on success */ + for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k) + gd->fpga_state[k] |= FPGA_STATE_PLATFORM; + } else { + pca9698_direction_output(0x22, 39, 1); + } +} + +void gd405ex_set_fpga_reset(unsigned state) +{ + int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; + + if (legacy) { + if (state) { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET); + } else { + out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT); + out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT); + } + } else { + pca9698_set_value(0x22, 39, state ? 0 : 1); + } +} + +void gd405ex_setup_hw(void) +{ + gpio_write_bit(CONFIG_SYS_GPIO_STARTUP_FINISHED_N, 0); + gpio_write_bit(CONFIG_SYS_GPIO_STARTUP_FINISHED, 1); +} + +int gd405ex_get_fpga_done(unsigned fpga) +{ + int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM; + + if (legacy) + return in_le16((void *)LATCH3_BASE) + & CONFIG_SYS_FPGA_DONE(fpga); + else + return pca9698_get_value(0x22, fpga ? 9 : 8); +} diff --git a/board/gdsys/common/Makefile b/board/gdsys/common/Makefile index 2868cc8..05dd65d 100644 --- a/board/gdsys/common/Makefile +++ b/board/gdsys/common/Makefile @@ -30,6 +30,7 @@ endif LIB = $(obj)lib$(VENDOR).o COBJS-$(CONFIG_IO) += miiphybb.o +COBJS-$(CONFIG_IO64) += miiphybb.o COBJS-$(CONFIG_IOCON) += osd.o COBJS-$(CONFIG_DLVISION_10G) += osd.o diff --git a/board/gdsys/common/miiphybb.c b/board/gdsys/common/miiphybb.c index e56e966..46f1a1e 100644 --- a/board/gdsys/common/miiphybb.c +++ b/board/gdsys/common/miiphybb.c @@ -26,6 +26,11 @@ #include <asm/io.h> +struct io_bb_pinset { + int mdio; + int mdc; +}; + static int io_bb_mii_init(struct bb_miiphy_bus *bus) { return 0; @@ -33,47 +38,57 @@ static int io_bb_mii_init(struct bb_miiphy_bus *bus) static int io_bb_mdio_active(struct bb_miiphy_bus *bus) { + struct io_bb_pinset *pins = bus->priv; + out_be32((void *)GPIO0_TCR, - in_be32((void *)GPIO0_TCR) | CONFIG_SYS_MDIO_PIN); + in_be32((void *)GPIO0_TCR) | pins->mdio); return 0; } static int io_bb_mdio_tristate(struct bb_miiphy_bus *bus) { + struct io_bb_pinset *pins = bus->priv; + out_be32((void *)GPIO0_TCR, - in_be32((void *)GPIO0_TCR) & ~CONFIG_SYS_MDIO_PIN); + in_be32((void *)GPIO0_TCR) & ~pins->mdio); return 0; } static int io_bb_set_mdio(struct bb_miiphy_bus *bus, int v) { + struct io_bb_pinset *pins = bus->priv; + if (v) out_be32((void *)GPIO0_OR, - in_be32((void *)GPIO0_OR) | CONFIG_SYS_MDIO_PIN); + in_be32((void *)GPIO0_OR) | pins->mdio); else out_be32((void *)GPIO0_OR, - in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_MDIO_PIN); + in_be32((void *)GPIO0_OR) & ~pins->mdio); return 0; } static int io_bb_get_mdio(struct bb_miiphy_bus *bus, int *v) { - *v = ((in_be32((void *)GPIO0_IR) & CONFIG_SYS_MDIO_PIN) != 0); + struct io_bb_pinset *pins = bus->priv; + + *v = ((in_be32((void *)GPIO0_IR) & pins->mdio) != 0); return 0; } static int io_bb_set_mdc(struct bb_miiphy_bus *bus, int v) { + struct io_bb_pinset *pins = bus->priv; + if (v) out_be32((void *)GPIO0_OR, - in_be32((void *)GPIO0_OR) | CONFIG_SYS_MDC_PIN); + in_be32((void *)GPIO0_OR) | pins->mdc); else out_be32((void *)GPIO0_OR, - in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_MDC_PIN); + in_be32((void *)GPIO0_OR) & ~pins->mdc); return 0; } @@ -85,6 +100,19 @@ static int io_bb_delay(struct bb_miiphy_bus *bus) return 0; } +struct io_bb_pinset io_bb_pinsets[] = { + { + .mdio = CONFIG_SYS_MDIO_PIN, + .mdc = CONFIG_SYS_MDC_PIN, + }, +#ifdef CONFIG_SYS_GBIT_MII1_BUSNAME + { + .mdio = CONFIG_SYS_MDIO1_PIN, + .mdc = CONFIG_SYS_MDC1_PIN, + }, +#endif +}; + struct bb_miiphy_bus bb_miiphy_buses[] = { { .name = CONFIG_SYS_GBIT_MII_BUSNAME, @@ -95,7 +123,21 @@ struct bb_miiphy_bus bb_miiphy_buses[] = { .get_mdio = io_bb_get_mdio, .set_mdc = io_bb_set_mdc, .delay = io_bb_delay, - } + .priv = &io_bb_pinsets[0], + }, +#ifdef CONFIG_SYS_GBIT_MII1_BUSNAME + { + .name = CONFIG_SYS_GBIT_MII1_BUSNAME, + .init = io_bb_mii_init, + .mdio_active = io_bb_mdio_active, + .mdio_tristate = io_bb_mdio_tristate, + .set_mdio = io_bb_set_mdio, + .get_mdio = io_bb_get_mdio, + .set_mdc = io_bb_set_mdc, + .delay = io_bb_delay, + .priv = &io_bb_pinsets[1], + }, +#endif }; int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) / @@ -954,6 +954,7 @@ dlvision-10g powerpc ppc4xx 405ep gdsys gdppc440etx powerpc ppc4xx - gdsys intip powerpc ppc4xx intip gdsys - intip:INTIB io powerpc ppc4xx 405ep gdsys +io64 powerpc ppc4xx 405ex gdsys iocon powerpc ppc4xx 405ep gdsys neo powerpc ppc4xx - gdsys icon powerpc ppc4xx - mosaixtech diff --git a/include/configs/io64.h b/include/configs/io64.h new file mode 100644 index 0000000..51b2dd1 --- /dev/null +++ b/include/configs/io64.h @@ -0,0 +1,566 @@ +/* + * (C) Copyright 2011 + * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de + * + * based on kilauea.h + * by Stefan Roese, DENX Software Engineering, sr@denx.de. + * and Grant Erickson <gerickson@nuovations.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/************************************************************************ + * io64.h - configuration for Guntermann & Drunck Io64 (405EX) + ***********************************************************************/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_IO64 1 /* Board is Io64 */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_405EX 1 /* Specifc 405EX support*/ +#define CONFIG_SYS_CLK_FREQ 33333333 /* ext frequency to pll */ + +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 +#endif + +/* + * CHIP_21 errata + */ +#define CONFIG_SYS_4xx_CHIP_21_405EX_SECURITY + +/* + * Include common defines/options for all AMCC eval boards + */ +#define CONFIG_HOSTNAME io64 +#define CONFIG_IDENT_STRING " io64 0.01" +#include "amcc-common.h" + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_EARLY_INIT_R +#define CONFIG_MISC_INIT_R +#define CONFIG_LAST_STAGE_INIT + +#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */ +#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */ +#define CONFIG_AUTOBOOT_STOP_STR " " + +/* new uImage format support */ +#define CONFIG_FIT +#define CONFIG_FIT_VERBOSE + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CONFIG_SYS_FLASH_BASE 0xFC000000 +#define CONFIG_SYS_NVRAM_BASE 0xF0000000 +#define CONFIG_SYS_FPGA0_BASE 0xF0100000 +#define CONFIG_SYS_FPGA1_BASE 0xF0108000 +#define CONFIG_SYS_LATCH_BASE 0xF0200000 + +/*----------------------------------------------------------------------- + * Initial RAM & Stack Pointer Configuration Options + * + * There are traditionally three options for the primordial + * (i.e. initial) stack usage on the 405-series: + * + * 1) On-chip Memory (OCM) (i.e. SRAM) + * 2) Data cache + * 3) SDRAM + * + * For the 405EX(r), there is no OCM, so we are left with (2) or (3) + * the latter of which is less than desireable since it requires + * setting up the SDRAM and ECC in assembly code. + * + * To use (2), define 'CONFIG_SYS_INIT_DCACHE_CS' to be an unused chip + * select on the External Bus Controller (EBC) and then select a + * value for 'CONFIG_SYS_INIT_RAM_ADDR' outside of the range of valid, + * physical SDRAM. Otherwise, undefine 'CONFIG_SYS_INIT_DCACHE_CS' and + * select a value for 'CONFIG_SYS_INIT_RAM_ADDR' within the range of valid, + * physical SDRAM to use (3). + *-----------------------------------------------------------------------*/ + +#define CONFIG_SYS_INIT_DCACHE_CS 4 + +#if defined(CONFIG_SYS_INIT_DCACHE_CS) +#define CONFIG_SYS_INIT_RAM_ADDR \ + (CONFIG_SYS_SDRAM_BASE + (1 << 30)) /* 1 GiB */ +#else +#define CONFIG_SYS_INIT_RAM_ADDR \ + (CONFIG_SYS_SDRAM_BASE + (32 << 20)) /* 32 MiB */ +#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ + +#define CONFIG_SYS_INIT_RAM_SIZE \ + (4 << 10) /* 4 KiB */ +#define CONFIG_SYS_GBL_DATA_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) + +/* + * If the data cache is being used for the primordial stack and global + * data area, the POST word must be placed somewhere else. The General + * Purpose Timer (GPT) is unused by u-boot and the kernel and preserves + * its compare and mask register contents across reset, so it is used + * for the POST word. + */ + +#if defined(CONFIG_SYS_INIT_DCACHE_CS) +# define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET +# define CONFIG_SYS_POST_WORD_ADDR \ + (CONFIG_SYS_PERIPHERAL_BASE + GPT0_COMP6) +#else +# define CONFIG_SYS_INIT_EXTRA_SIZE 16 +# define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_GBL_DATA_OFFSET - CONFIG_SYS_INIT_EXTRA_SIZE) +# define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_INIT_RAM_ADDR +#endif /* defined(CONFIG_SYS_INIT_DCACHE_CS) */ + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#define CONFIG_CONS_INDEX 1 /* Use UART0 */ +#define CONFIG_SYS_BASE_BAUD 691200 + +/*----------------------------------------------------------------------- + * Environment + *----------------------------------------------------------------------*/ +#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ +#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ + +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 512 + +#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 + +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_EMPTY_INFO + +#ifdef CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE-CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE) +#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) +#endif /* CONFIG_ENV_IS_IN_FLASH */ + +/* Gbit PHYs */ +#define CONFIG_BITBANGMII /* bit-bang MII PHY management */ +#define CONFIG_BITBANGMII_MULTI + +#define CONFIG_SYS_MDIO_PIN (0x80000000 >> 12) /* MDIO is GPIO12 */ +#define CONFIG_SYS_MDC_PIN (0x80000000 >> 13) /* MDC is GPIO13 */ + +#define CONFIG_SYS_GBIT_MII_BUSNAME "io_miiphy0" + +#define CONFIG_SYS_MDIO1_PIN (0x80000000 >> 2) /* MDIO is GPIO2 */ +#define CONFIG_SYS_MDC1_PIN (0x80000000 >> 3) /* MDC is GPIO3 */ + +#define CONFIG_SYS_GBIT_MII1_BUSNAME "io_miiphy1" + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#define CONFIG_SYS_MBYTES_SDRAM (128) /* 128MB */ + +/* + * CONFIG_PPC4xx_DDR_AUTOCALIBRATION + * + * Note: DDR Autocalibration Method_A scans the full range of possible PPC4xx + * SDRAM Controller DDR autocalibration values and takes a lot longer + * to run than Method_B. + * (See the Method_A and Method_B algorithm discription in the file: + * arch/powerpc/cpu/ppc4xx/4xx_ibm_ddr2_autocalib.c) + * Define CONFIG_PPC4xx_DDR_METHOD_A to use DDR autocalibration Method_A + * + * DDR Autocalibration Method_B is the default. + */ +#define CONFIG_PPC4xx_DDR_AUTOCALIBRATION +#define DEBUG_PPC4xx_DDR_AUTOCALIBRATION +#undef CONFIG_PPC4xx_DDR_METHOD_A + +#define CONFIG_SYS_SDRAM0_MB0CF_BASE ((0 << 20) + CONFIG_SYS_SDRAM_BASE) + +/* DDR1/2 SDRAM Device Control Register Data Values */ +#define CONFIG_SYS_SDRAM0_MB0CF ((CONFIG_SYS_SDRAM0_MB0CF_BASE >> 3) | \ + SDRAM_RXBAS_SDSZ_128MB | \ + SDRAM_RXBAS_SDAM_MODE2 | \ + SDRAM_RXBAS_SDBE_ENABLE) +#define CONFIG_SYS_SDRAM0_MB1CF SDRAM_RXBAS_SDBE_DISABLE +#define CONFIG_SYS_SDRAM0_MB2CF SDRAM_RXBAS_SDBE_DISABLE +#define CONFIG_SYS_SDRAM0_MB3CF SDRAM_RXBAS_SDBE_DISABLE +#define CONFIG_SYS_SDRAM0_MCOPT1 (SDRAM_MCOPT1_PMU_OPEN | \ + SDRAM_MCOPT1_4_BANKS | \ + SDRAM_MCOPT1_DDR2_TYPE | \ + SDRAM_MCOPT1_QDEP | \ + SDRAM_MCOPT1_DCOO_DISABLED) +#define CONFIG_SYS_SDRAM0_MCOPT2 0x00000000 +#define CONFIG_SYS_SDRAM0_MODT0 (SDRAM_MODT_EB0W_ENABLE | \ + SDRAM_MODT_EB0R_ENABLE) +#define CONFIG_SYS_SDRAM0_MODT1 0x00000000 +#define CONFIG_SYS_SDRAM0_CODT (SDRAM_CODT_RK0R_ON | \ + SDRAM_CODT_CKLZ_36OHM | \ + SDRAM_CODT_DQS_1_8_V_DDR2 | \ + SDRAM_CODT_IO_NMODE) +#define CONFIG_SYS_SDRAM0_RTR SDRAM_RTR_RINT_ENCODE(1560) +#define CONFIG_SYS_SDRAM0_INITPLR0 (SDRAM_INITPLR_ENABLE | \ + SDRAM_INITPLR_IMWT_ENCODE(80) | \ + SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_NOP)) +#define CONFIG_SYS_SDRAM0_INITPLR1 (SDRAM_INITPLR_ENABLE | \ + SDRAM_INITPLR_IMWT_ENCODE(3) | \ + SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \ + SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \ + SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL)) +#define CONFIG_SYS_SDRAM0_INITPLR2 (SDRAM_INITPLR_ENABLE | \ + SDRAM_INITPLR_IMWT_ENCODE(2) | \ + SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ + SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR2) | \ + SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR2_TEMP_COMMERCIAL)) +#define CONFIG_SYS_SDRAM0_INITPLR3 (SDRAM_INITPLR_ENABLE | \ + SDRAM_INITPLR_IMWT_ENCODE(2) | \ + SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ + SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR3) | \ + SDRAM_INITPLR_IMA_ENCODE(0)) +#define CONFIG_SYS_SDRAM0_INITPLR4 (SDRAM_INITPLR_ENABLE | \ + SDRAM_INITPLR_IMWT_ENCODE(2) | \ + SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ + SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \ + SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_DQS_DISABLE | \ + JEDEC_MA_EMR_RTT_75OHM)) +#define CONFIG_SYS_SDRAM0_INITPLR5 (SDRAM_INITPLR_ENABLE | \ + SDRAM_INITPLR_IMWT_ENCODE(2) | \ + SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ + SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \ + SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \ + JEDEC_MA_MR_CL_DDR2_5_0_CLK | \ + JEDEC_MA_MR_BLEN_4 | \ + JEDEC_MA_MR_DLL_RESET)) +#define CONFIG_SYS_SDRAM0_INITPLR6 (SDRAM_INITPLR_ENABLE | \ + SDRAM_INITPLR_IMWT_ENCODE(3) | \ + SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_PRECHARGE) | \ + SDRAM_INITPLR_IBA_ENCODE(0x0) | \ + SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_PRECHARGE_ALL)) +#define CONFIG_SYS_SDRAM0_INITPLR7 (SDRAM_INITPLR_ENABLE | \ + SDRAM_INITPLR_IMWT_ENCODE(26) | \ + SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH)) +#define CONFIG_SYS_SDRAM0_INITPLR8 (SDRAM_INITPLR_ENABLE | \ + SDRAM_INITPLR_IMWT_ENCODE(26) | \ + SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH)) +#define CONFIG_SYS_SDRAM0_INITPLR9 (SDRAM_INITPLR_ENABLE | \ + SDRAM_INITPLR_IMWT_ENCODE(26) | \ + SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH)) +#define CONFIG_SYS_SDRAM0_INITPLR10 (SDRAM_INITPLR_ENABLE | \ + SDRAM_INITPLR_IMWT_ENCODE(26) | \ + SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_REFRESH)) +#define CONFIG_SYS_SDRAM0_INITPLR11 (SDRAM_INITPLR_ENABLE | \ + SDRAM_INITPLR_IMWT_ENCODE(2) | \ + SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ + SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_MR) | \ + SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_MR_WR_DDR2_3_CYC | \ + JEDEC_MA_MR_CL_DDR2_5_0_CLK | \ + JEDEC_MA_MR_BLEN_4)) +#define CONFIG_SYS_SDRAM0_INITPLR12 (SDRAM_INITPLR_ENABLE | \ + SDRAM_INITPLR_IMWT_ENCODE(2) | \ + SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ + SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \ + SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_ENTER | \ + JEDEC_MA_EMR_RDQS_DISABLE | \ + JEDEC_MA_EMR_DQS_DISABLE | \ + JEDEC_MA_EMR_RTT_DISABLED | \ + JEDEC_MA_EMR_ODS_NORMAL)) +#define CONFIG_SYS_SDRAM0_INITPLR13 (SDRAM_INITPLR_ENABLE | \ + SDRAM_INITPLR_IMWT_ENCODE(2) | \ + SDRAM_INITPLR_ICMD_ENCODE(JEDEC_CMD_EMR) | \ + SDRAM_INITPLR_IBA_ENCODE(JEDEC_BA_EMR) | \ + SDRAM_INITPLR_IMA_ENCODE(JEDEC_MA_EMR_OCD_EXIT | \ + JEDEC_MA_EMR_RDQS_DISABLE | \ + JEDEC_MA_EMR_DQS_DISABLE | \ + JEDEC_MA_EMR_RTT_DISABLED | \ + JEDEC_MA_EMR_ODS_NORMAL)) +#define CONFIG_SYS_SDRAM0_INITPLR14 (SDRAM_INITPLR_DISABLE) +#define CONFIG_SYS_SDRAM0_INITPLR15 (SDRAM_INITPLR_DISABLE) +#define CONFIG_SYS_SDRAM0_RQDC (SDRAM_RQDC_RQDE_ENABLE | \ + SDRAM_RQDC_RQFD_ENCODE(56)) +#define CONFIG_SYS_SDRAM0_RFDC SDRAM_RFDC_RFFD_ENCODE(521) +#define CONFIG_SYS_SDRAM0_RDCC (SDRAM_RDCC_RDSS_T2) +#define CONFIG_SYS_SDRAM0_DLCR (SDRAM_DLCR_DCLM_AUTO | \ + SDRAM_DLCR_DLCS_CONT_DONE | \ + SDRAM_DLCR_DLCV_ENCODE(165)) +#define CONFIG_SYS_SDRAM0_CLKTR (SDRAM_CLKTR_CLKP_180_DEG_ADV) +#define CONFIG_SYS_SDRAM0_WRDTR 0x00000000 +#define CONFIG_SYS_SDRAM0_SDTR1 (SDRAM_SDTR1_LDOF_2_CLK | \ + SDRAM_SDTR1_RTW_2_CLK | \ + SDRAM_SDTR1_WTWO_1_CLK | \ + SDRAM_SDTR1_RTRO_1_CLK) +#define CONFIG_SYS_SDRAM0_SDTR2 (SDRAM_SDTR2_RCD_3_CLK | \ + SDRAM_SDTR2_WTR_2_CLK | \ + SDRAM_SDTR2_XSNR_32_CLK | \ + SDRAM_SDTR2_WPC_4_CLK | \ + SDRAM_SDTR2_RPC_2_CLK | \ + SDRAM_SDTR2_RP_3_CLK | \ + SDRAM_SDTR2_RRD_2_CLK) +#define CONFIG_SYS_SDRAM0_SDTR3 (SDRAM_SDTR3_RAS_ENCODE(9) | \ + SDRAM_SDTR3_RC_ENCODE(12) | \ + SDRAM_SDTR3_XCS | \ + SDRAM_SDTR3_RFC_ENCODE(21)) +#define CONFIG_SYS_SDRAM0_MMODE (SDRAM_MMODE_WR_DDR2_3_CYC | \ + SDRAM_MMODE_DCL_DDR2_5_0_CLK | \ + SDRAM_MMODE_BLEN_4) +#define CONFIG_SYS_SDRAM0_MEMODE (SDRAM_MEMODE_DQS_DISABLE | \ + SDRAM_MEMODE_RTT_75OHM) + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ + +#define CONFIG_PCA9698 1 /* NXP PCA9698 */ + +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 /* I2C boot EEPROM (24C02BN) */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 + +/* I2C bootstrap EEPROM */ +#define CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR 0x54 +#define CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET 0 +#define CONFIG_4xx_CONFIG_BLOCKSIZE 16 + +/* Temp sensor/hwmon/dtt */ +#define CONFIG_DTT_LM63 1 /* National LM63 */ +#define CONFIG_DTT_SENSORS { 0x18, 0x4c, 0x4e } /* Sensor addresses */ +#define CONFIG_DTT_PWM_LOOKUPTABLE \ + { { 40, 10 }, { 43, 13 }, { 46, 16 }, \ + { 50, 20 }, { 53, 27 }, { 56, 34 }, { 60, 40 } } +#define CONFIG_DTT_TACH_LIMIT 0xa10 + +/*----------------------------------------------------------------------- + * Ethernet + *----------------------------------------------------------------------*/ +#define CONFIG_M88E1111_PHY 1 +#define CONFIG_IBM_EMAC4_V4 1 +#define CONFIG_EMAC_PHY_MODE EMAC_PHY_MODE_RGMII_RGMII +#define CONFIG_PHY_ADDR 0x12 /* PHY address, See schematics */ + +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ + +#define CONFIG_HAS_ETH0 1 + +#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ +#define CONFIG_PHY1_ADDR 0x13 + +/* Debug messages for the DDR autocalibration */ +#define CONFIG_AUTOCALIB "silent\0" + +/* + * Default environment variables + */ +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_AMCC_DEF_ENV \ + CONFIG_AMCC_DEF_ENV_POWERPC \ + CONFIG_AMCC_DEF_ENV_PPC_OLD \ + CONFIG_AMCC_DEF_ENV_NOR_UPD \ + "logversion=2\0" \ + "kernel_addr=fc000000\0" \ + "fdt_addr=fc1e0000\0" \ + "ramdisk_addr=fc200000\0" \ + "pciconfighost=1\0" \ + "pcie_mode=RP:RP\0" \ + "" + +/* + * Commands additional to the ones defined in amcc-common.h + */ +#define CONFIG_CMD_CHIP_CONFIG +#define CONFIG_CMD_DTT + +#define CONFIG_SYS_POST_MEMORY_ON CONFIG_SYS_POST_MEMORY + +/* POST support */ +#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ + CONFIG_SYS_POST_CPU | \ + CONFIG_SYS_POST_ETHER | \ + CONFIG_SYS_POST_I2C | \ + CONFIG_SYS_POST_MEMORY_ON | \ + CONFIG_SYS_POST_UART) + +/* Define here the base-addresses of the UARTs to test in POST */ +#define CONFIG_SYS_POST_UART_TABLE { CONFIG_SYS_NS16550_COM1, \ + CONFIG_SYS_NS16550_COM2 } + +#define CONFIG_LOGBUFFER +#define CONFIG_SYS_POST_CACHE_ADDR 0x00800000 /* free virtual address */ + +#define CONFIG_SYS_CONSOLE_IS_IN_ENV + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ + +/* Memory Bank 0 (NOR-flash) */ +#define CONFIG_SYS_EBC_PB0AP (EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(11) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(0) | \ + EBC_BXAP_WBN_ENCODE(1) | \ + EBC_BXAP_WBF_ENCODE(2) | \ + EBC_BXAP_TH_ENCODE(2) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_NONDELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED) +#define CONFIG_SYS_EBC_PB0CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | \ + EBC_BXCR_BS_64MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT) + +/* Memory Bank 1 (NVRAM/Uart) */ +#define CONFIG_SYS_EBC_PB1AP (EBC_BXAP_BME_ENABLED | \ + EBC_BXAP_FWT_ENCODE(8) | \ + EBC_BXAP_BWT_ENCODE(4) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(1) | \ + EBC_BXAP_WBN_ENCODE(1) | \ + EBC_BXAP_WBF_ENCODE(1) | \ + EBC_BXAP_TH_ENCODE(2) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_NONDELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED) +#define CONFIG_SYS_EBC_PB1CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_NVRAM_BASE) | \ + EBC_BXCR_BS_1MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_8BIT) + +/* Memory Bank 2 (FPGA) */ +#define CONFIG_SYS_EBC_PB2AP (EBC_BXAP_BME_DISABLED | \ + EBC_BXAP_TWT_ENCODE(5) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(2) | \ + EBC_BXAP_WBN_ENCODE(1) | \ + EBC_BXAP_WBF_ENCODE(1) | \ + EBC_BXAP_TH_ENCODE(0) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_NONDELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED) +#define CONFIG_SYS_EBC_PB2CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FPGA0_BASE) | \ + EBC_BXCR_BS_1MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT) + +/* Memory Bank 3 (Latches) */ +#define CONFIG_SYS_EBC_PB3AP (EBC_BXAP_BME_ENABLED | \ + EBC_BXAP_FWT_ENCODE(8) | \ + EBC_BXAP_BWT_ENCODE(4) | \ + EBC_BXAP_BCE_DISABLE | \ + EBC_BXAP_BCT_2TRANS | \ + EBC_BXAP_CSN_ENCODE(0) | \ + EBC_BXAP_OEN_ENCODE(1) | \ + EBC_BXAP_WBN_ENCODE(1) | \ + EBC_BXAP_WBF_ENCODE(1) | \ + EBC_BXAP_TH_ENCODE(2) | \ + EBC_BXAP_RE_DISABLED | \ + EBC_BXAP_SOR_NONDELAYED | \ + EBC_BXAP_BEM_WRITEONLY | \ + EBC_BXAP_PEN_DISABLED) +#define CONFIG_SYS_EBC_PB3CR (EBC_BXCR_BAS_ENCODE(CONFIG_SYS_LATCH_BASE) | \ + EBC_BXCR_BS_1MB | \ + EBC_BXCR_BU_RW | \ + EBC_BXCR_BW_16BIT) + +/* EBC peripherals */ + +#define CONFIG_SYS_FPGA_BASE(k) \ + (k ? CONFIG_SYS_FPGA1_BASE : CONFIG_SYS_FPGA0_BASE) + +#define CONFIG_SYS_FPGA_DONE(k) \ + (k ? 0x0040 : 0x0080) + +#define CONFIG_SYS_FPGA_COUNT 2 + +#define CONFIG_SYS_LATCH0_RESET 0xffff +#define CONFIG_SYS_LATCH0_BOOT 0xffff +#define CONFIG_SYS_LATCH1_RESET 0xffbf +#define CONFIG_SYS_LATCH1_BOOT 0xffff + +/*----------------------------------------------------------------------- + * GPIO Setup + *----------------------------------------------------------------------*/ +#define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO */ \ +{ \ +/* GPIO Core 0 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO0 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO1 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO2 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO3 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO4 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO5 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO6 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO7 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO8 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO9 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO10 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO11 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO12 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO13 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO14 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO15 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO16 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO17 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO18 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO19 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_0 }, /* GPIO20 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0 }, /* GPIO21 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO22 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG}, /* GPIO23 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0 }, /* GPIO24 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT3, GPIO_OUT_0 }, /* GPIO25 */ \ +{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0 }, /* GPIO26 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0 }, /* GPIO27 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0 }, /* GPIO28 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_0 }, /* GPIO29 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0 }, /* GPIO30 */ \ +{GPIO0_BASE, GPIO_IN, GPIO_ALT2, GPIO_OUT_0 }, /* GPIO31 */ \ +} \ +} + +#define CONFIG_SYS_GPIO_STARTUP_FINISHED 15 +#define CONFIG_SYS_GPIO_STARTUP_FINISHED_N 14 + +#endif /* __CONFIG_H */ diff --git a/include/gdsys_fpga.h b/include/gdsys_fpga.h index c0b1b5c..e7a072b 100644 --- a/include/gdsys_fpga.h +++ b/include/gdsys_fpga.h @@ -24,9 +24,12 @@ #ifndef __GDSYS_FPGA_H #define __GDSYS_FPGA_H +int init_func_fpga(void); + enum { FPGA_STATE_DONE_FAILED = 1 << 0, FPGA_STATE_REFLECTION_FAILED = 1 << 1, + FPGA_STATE_PLATFORM = 1 << 2, }; int get_fpga_state(unsigned dev); @@ -68,6 +71,22 @@ typedef struct ihs_fpga { } ihs_fpga_t; #endif +#ifdef CONFIG_IO64 +typedef struct ihs_fpga { + u16 reflection_low; /* 0x0000 */ + u16 versions; /* 0x0002 */ + u16 fpga_features; /* 0x0004 */ + u16 fpga_version; /* 0x0006 */ + u16 reserved_0[5]; /* 0x0008 */ + u16 quad_serdes_reset; /* 0x0012 */ + u16 reserved_1[502]; /* 0x0014 */ + u16 ch0_status_int; /* 0x0400 */ + u16 ch0_config_int; /* 0x0402 */ + u16 reserved_2[7677]; /* 0x0404 */ + u16 reflection_high; /* 0x3ffe */ +} ihs_fpga_t; +#endif + #ifdef CONFIG_IOCON typedef struct ihs_fpga { u16 reflection_low; /* 0x0000 */ |