diff options
45 files changed, 1726 insertions, 437 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 9379c7e..75f4133 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -431,6 +431,7 @@ Rune Torgersen <runet@innovsys.com> Peter Tyser <ptyser@xes-inc.com> + XPEDITE5170 MPC8640 XPEDITE5200 MPC8548 XPEDITE5370 MPC8572 @@ -411,6 +411,7 @@ LIST_86xx=" \ MPC8610HPCD \ MPC8641HPCN \ sbc8641d \ + XPEDITE5170 \ " ######################################################################### @@ -2580,6 +2580,9 @@ MPC8641HPCN_config: unconfig sbc8641d_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d +XPEDITE5170_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes + ######################################################################### ## 74xx/7xx Systems ######################################################################### diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index ae5304a..3e1e332 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -78,12 +78,14 @@ static int has_been_read = 0; #ifdef CONFIG_SYS_I2C_EEPROM_NXID /* Is this a valid NXID EEPROM? */ -#define is_valid (*((u32 *)e.id) == (('N' << 24) | ('X' << 16) | ('I' << 8) | 'D')) +#define is_valid ((e.id[0] == 'N') || (e.id[1] == 'X') || \ + (e.id[2] == 'I') || (e.id[3] == 'D')) #endif #ifdef CONFIG_SYS_I2C_EEPROM_CCID /* Is this a valid CCID EEPROM? */ -#define is_valid (*((u32 *)e.id) == (('C' << 24) | ('C' << 16) | ('I' << 8) | 'D')) +#define is_valid ((e.id[0] == 'C') || (e.id[1] == 'C') || \ + (e.id[2] == 'I') || (e.id[3] == 'D')) #endif /** diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index 85c0120..dc4dbd3 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -116,7 +116,7 @@ int board_early_init_r(void) return 0; } -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc(unsigned int dram_size); #endif int fixed_sdram(void); @@ -138,7 +138,7 @@ phys_size_t initdram(int board_type) msize = fixed_sdram(); #endif -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* * Initialize DDR ECC byte */ diff --git a/board/freescale/mpc8360erdk/mpc8360erdk.c b/board/freescale/mpc8360erdk/mpc8360erdk.c index af3b8ce..3771878 100644 --- a/board/freescale/mpc8360erdk/mpc8360erdk.c +++ b/board/freescale/mpc8360erdk/mpc8360erdk.c @@ -268,7 +268,7 @@ int fixed_sdram(void) phys_size_t initdram(int board_type) { -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc(unsigned int dram_size); #endif volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; @@ -281,7 +281,7 @@ phys_size_t initdram(int board_type) im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; msize = fixed_sdram(); -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* * Initialize DDR ECC byte */ diff --git a/board/freescale/mpc837xemds/mpc837xemds.c b/board/freescale/mpc837xemds/mpc837xemds.c index 062d762..8506892 100644 --- a/board/freescale/mpc837xemds/mpc837xemds.c +++ b/board/freescale/mpc837xemds/mpc837xemds.c @@ -199,7 +199,7 @@ int board_early_init_r(void) return 0; } -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc(unsigned int dram_size); #endif int fixed_sdram(void); @@ -218,7 +218,7 @@ phys_size_t initdram(int board_type) msize = fixed_sdram(); #endif -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* Initialize DDR ECC byte */ ddr_enable_ecc(msize * 1024 * 1024); #endif diff --git a/board/freescale/mpc837xerdb/mpc837xerdb.c b/board/freescale/mpc837xerdb/mpc837xerdb.c index 318a3dc..a4a1927 100644 --- a/board/freescale/mpc837xerdb/mpc837xerdb.c +++ b/board/freescale/mpc837xerdb/mpc837xerdb.c @@ -59,7 +59,7 @@ testdram(void) } #endif -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) void ddr_enable_ecc(unsigned int dram_size); #endif int fixed_sdram(void); @@ -78,7 +78,7 @@ phys_size_t initdram(int board_type) msize = fixed_sdram(); #endif -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* Initialize DDR ECC byte */ ddr_enable_ecc(msize * 1024 * 1024); #endif diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index 6b72d61..293e5a4 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -36,6 +36,7 @@ #include <tsec.h> #include <asm/fsl_law.h> #include <asm/mp.h> +#include <netdev.h> #include "../common/pixis.h" #include "../common/sgmii_riser.h" @@ -594,7 +595,7 @@ int board_eth_init(bd_t *bis) tsec_eth_init(bis, tsec_info, num); - return 0; + return pci_eth_init(bis); } #endif diff --git a/board/keymile/kmeter1/kmeter1.c b/board/keymile/kmeter1/kmeter1.c index 660d87b..3d1b941 100644 --- a/board/keymile/kmeter1/kmeter1.c +++ b/board/keymile/kmeter1/kmeter1.c @@ -153,7 +153,7 @@ int fixed_sdram(void) phys_size_t initdram (int board_type) { -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) extern void ddr_enable_ecc (unsigned int dram_size); #endif volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; @@ -166,7 +166,7 @@ phys_size_t initdram (int board_type) im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_BASE & LAWBAR_BAR; msize = fixed_sdram (); -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* * Initialize DDR ECC byte */ diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c index 72a1ad3..7c27233 100644 --- a/board/mpc8540eval/mpc8540eval.c +++ b/board/mpc8540eval/mpc8540eval.c @@ -137,40 +137,9 @@ phys_size_t initdram (int board_type) { /* Initialize all of memory for ECC, then * enable errors */ - uint *p = 0; - uint i = 0; volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); - dma_init(); - for (*p = 0; p < (uint *)(8 * 1024); p++) { - if (((unsigned int)p & 0x1f) == 0) { dcbz(p); } - *p = (unsigned int)0xdeadbeef; - if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); } - } - - /* 8K */ - dma_xfer((uint *)0x2000,0x2000,(uint *)0); - /* 16K */ - dma_xfer((uint *)0x4000,0x4000,(uint *)0); - /* 32K */ - dma_xfer((uint *)0x8000,0x8000,(uint *)0); - /* 64K */ - dma_xfer((uint *)0x10000,0x10000,(uint *)0); - /* 128k */ - dma_xfer((uint *)0x20000,0x20000,(uint *)0); - /* 256k */ - dma_xfer((uint *)0x40000,0x40000,(uint *)0); - /* 512k */ - dma_xfer((uint *)0x80000,0x80000,(uint *)0); - /* 1M */ - dma_xfer((uint *)0x100000,0x100000,(uint *)0); - /* 2M */ - dma_xfer((uint *)0x200000,0x200000,(uint *)0); - /* 4M */ - dma_xfer((uint *)0x400000,0x400000,(uint *)0); - for (i = 1; i < dram_size / 0x800000; i++) { - dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0); - } + dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size); /* Enable errors for ECC */ ddr->err_disable = 0x00000000; diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c index 7f032c8..c40b5e3 100644 --- a/board/sbc8560/sbc8560.c +++ b/board/sbc8560/sbc8560.c @@ -338,40 +338,9 @@ phys_size_t initdram (int board_type) { /* Initialize all of memory for ECC, then * enable errors */ - uint *p = 0; - uint i = 0; volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); - dma_init(); - for (*p = 0; p < (uint *)(8 * 1024); p++) { - if (((unsigned int)p & 0x1f) == 0) { dcbz(p); } - *p = (unsigned int)0xdeadbeef; - if (((unsigned int)p & 0x1c) == 0x1c) { dcbf(p); } - } - /* 8K */ - dma_xfer((uint *)0x2000,0x2000,(uint *)0); - /* 16K */ - dma_xfer((uint *)0x4000,0x4000,(uint *)0); - /* 32K */ - dma_xfer((uint *)0x8000,0x8000,(uint *)0); - /* 64K */ - dma_xfer((uint *)0x10000,0x10000,(uint *)0); - /* 128k */ - dma_xfer((uint *)0x20000,0x20000,(uint *)0); - /* 256k */ - dma_xfer((uint *)0x40000,0x40000,(uint *)0); - /* 512k */ - dma_xfer((uint *)0x80000,0x80000,(uint *)0); - /* 1M */ - dma_xfer((uint *)0x100000,0x100000,(uint *)0); - /* 2M */ - dma_xfer((uint *)0x200000,0x200000,(uint *)0); - /* 4M */ - dma_xfer((uint *)0x400000,0x400000,(uint *)0); - - for (i = 1; i < dram_size / 0x800000; i++) { - dma_xfer((uint *)(0x800000*i),0x800000,(uint *)0); - } + dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size); /* Enable errors for ECC */ ddr->err_disable = 0x00000000; diff --git a/board/xes/xpedite5170/Makefile b/board/xes/xpedite5170/Makefile new file mode 100644 index 0000000..fea6686 --- /dev/null +++ b/board/xes/xpedite5170/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2001 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += $(BOARD).o +COBJS-y += ddr.o +COBJS-y += law.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) $(SOBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude ($obj).depend + +######################################################################### diff --git a/board/xes/xpedite5170/config.mk b/board/xes/xpedite5170/config.mk new file mode 100644 index 0000000..c3df6d5 --- /dev/null +++ b/board/xes/xpedite5170/config.mk @@ -0,0 +1,32 @@ +# +# Copyright 2009 Extreme Engineering Solutions, Inc. +# Copyright 2007-2008 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# XPedite5170 +# +TEXT_BASE = 0xfff00000 + +PLATFORM_RELFLAGS += -mrelocatable + +PLATFORM_CPPFLAGS += -DCONFIG_MPC86xx=1 +PLATFORM_CPPFLAGS += -DCONFIG_MPC8641=1 -maltivec -mabi=altivec -msoft-float diff --git a/board/xes/xpedite5170/ddr.c b/board/xes/xpedite5170/ddr.c new file mode 100644 index 0000000..1d57d09 --- /dev/null +++ b/board/xes/xpedite5170/ddr.c @@ -0,0 +1,168 @@ +/* + * Copyright 2009 Extreme Engineering Solutions, Inc. + * Copyright 2007-2008 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <i2c.h> +#include <asm/fsl_ddr_sdram.h> +#include <asm/fsl_ddr_dimm_params.h> + +static void get_spd(ddr2_spd_eeprom_t *spd, unsigned char i2c_address) +{ + i2c_read(i2c_address, SPD_EEPROM_OFFSET, 2, (uchar *)spd, + sizeof(ddr2_spd_eeprom_t)); +} + +unsigned int fsl_ddr_get_mem_data_rate(void) +{ + return get_bus_freq(0); +} + +void fsl_ddr_get_spd(ddr2_spd_eeprom_t *ctrl_dimms_spd, + unsigned int ctrl_num) +{ + unsigned int i; + unsigned int i2c_address = 0; + + for (i = 0; i < CONFIG_DIMM_SLOTS_PER_CTLR; i++) { + if (ctrl_num == 0) { + i2c_address = SPD_EEPROM_ADDRESS1; +#ifdef SPD_EEPROM_ADDRESS2 + } else if (ctrl_num == 1) { + i2c_address = SPD_EEPROM_ADDRESS2; +#endif + } else { + /* An inalid ctrl number was give, use default SPD */ + printf("ERROR: invalid DDR ctrl: %d\n", ctrl_num); + i2c_address = SPD_EEPROM_ADDRESS1; + } + + get_spd(&(ctrl_dimms_spd[i]), i2c_address); + } +} + +/* + * There are four board-specific SDRAM timing parameters which must be + * calculated based on the particular PCB artwork. These are: + * 1.) CPO (Read Capture Delay) + * - TIMING_CFG_2 register + * Source: Calculation based on board trace lengths and + * chip-specific internal delays. + * 2.) WR_DATA_DELAY (Write Command to Data Strobe Delay) + * - TIMING_CFG_2 register + * Source: Calculation based on board trace lengths. + * Unless clock and DQ lanes are very different + * lengths (>2"), this should be set to the nominal value + * of 1/2 clock delay. + * 3.) CLK_ADJUST (Clock and Addr/Cmd alignment control) + * - DDR_SDRAM_CLK_CNTL register + * Source: Signal Integrity Simulations + * 4.) 2T Timing on Addr/Ctl + * - TIMING_CFG_2 register + * Source: Signal Integrity Simulations + * Usually only needed with heavy load/very high speed (>DDR2-800) + * + * PCB routing on the XPedite5170 is nearly identical to the XPedite5370 + * so we use the XPedite5370 settings as a basis for the XPedite5170. + */ + +typedef struct board_memctl_options { + uint16_t datarate_mhz_low; + uint16_t datarate_mhz_high; + uint8_t clk_adjust; + uint8_t cpo_override; + uint8_t write_data_delay; +} board_memctl_options_t; + +static struct board_memctl_options bopts_ctrl[][2] = { + { + /* Controller 0 */ + { + /* DDR2 600/667 */ + .datarate_mhz_low = 500, + .datarate_mhz_high = 750, + .clk_adjust = 5, + .cpo_override = 8, + .write_data_delay = 2, + }, + { + /* DDR2 800 */ + .datarate_mhz_low = 750, + .datarate_mhz_high = 850, + .clk_adjust = 5, + .cpo_override = 9, + .write_data_delay = 2, + }, + }, + { + /* Controller 1 */ + { + /* DDR2 600/667 */ + .datarate_mhz_low = 500, + .datarate_mhz_high = 750, + .clk_adjust = 5, + .cpo_override = 7, + .write_data_delay = 2, + }, + { + /* DDR2 800 */ + .datarate_mhz_low = 750, + .datarate_mhz_high = 850, + .clk_adjust = 5, + .cpo_override = 8, + .write_data_delay = 2, + }, + }, +}; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + struct board_memctl_options *bopts = bopts_ctrl[ctrl_num]; + sys_info_t sysinfo; + int i; + unsigned int datarate; + + get_sys_info(&sysinfo); + datarate = fsl_ddr_get_mem_data_rate() / 1000000; + + for (i = 0; i < ARRAY_SIZE(bopts_ctrl[ctrl_num]); i++) { + if ((bopts[i].datarate_mhz_low <= datarate) && + (bopts[i].datarate_mhz_high >= datarate)) { + debug("controller %d:\n", ctrl_num); + debug(" clk_adjust = %d\n", bopts[i].clk_adjust); + debug(" cpo = %d\n", bopts[i].cpo_override); + debug(" write_data_delay = %d\n", + bopts[i].write_data_delay); + popts->clk_adjust = bopts[i].clk_adjust; + popts->cpo_override = bopts[i].cpo_override; + popts->write_data_delay = bopts[i].write_data_delay; + } + } + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 0; +} diff --git a/board/xes/xpedite5170/law.c b/board/xes/xpedite5170/law.c new file mode 100644 index 0000000..0b7d9ef --- /dev/null +++ b/board/xes/xpedite5170/law.c @@ -0,0 +1,52 @@ +/* + * Copyright 2008 Freescale Semiconductor, Inc. + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/fsl_law.h> +#include <asm/mmu.h> + +/* + * Notes: + * CCSRBAR don't need a configured Local Access Window. + * If flash is 8M at default position (last 8M), no LAW needed. + */ + +struct law_entry law_table[] = { + SET_LAW(CONFIG_SYS_FLASH_BASE2, LAW_SIZE_256M, LAW_TRGT_IF_LBC), +#ifdef CONFIG_SYS_NAND_BASE + /* NAND LAW covers 2 NAND flashes */ + SET_LAW(CONFIG_SYS_NAND_BASE, LAW_SIZE_512K, LAW_TRGT_IF_LBC), +#endif +#ifdef CONFIG_SYS_PCIE1_MEM_PHYS + SET_LAW(CONFIG_SYS_PCIE1_MEM_PHYS, LAW_SIZE_1G, LAW_TRGT_IF_PCIE_1), + SET_LAW(CONFIG_SYS_PCIE1_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_1), +#endif +#ifdef CONFIG_SYS_PCIE2_MEM_PHYS + SET_LAW(CONFIG_SYS_PCIE2_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCIE_2), + SET_LAW(CONFIG_SYS_PCIE2_IO_PHYS, LAW_SIZE_8M, LAW_TRGT_IF_PCIE_2), +#endif +}; + +int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/xes/xpedite5170/u-boot.lds b/board/xes/xpedite5170/u-boot.lds new file mode 100644 index 0000000..b71a7d6 --- /dev/null +++ b/board/xes/xpedite5170/u-boot.lds @@ -0,0 +1,132 @@ +/* + * Copyright 2006, 2007 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) + +SECTIONS +{ + + /* Read-only sections, merged into text segment: */ + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/mpc86xx/start.o (.text) + cpu/mpc86xx/traps.o (.text) + cpu/mpc86xx/interrupts.o (.text) + cpu/mpc86xx/cpu_init.o (.text) + cpu/mpc86xx/cpu.o (.text) + cpu/mpc86xx/speed.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + *(.text) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.eh_frame) + *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; + __fixup_entries = (. - _FIXUP_TABLE_) >> 2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + . = ALIGN(4); + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/xes/xpedite5170/xpedite5170.c b/board/xes/xpedite5170/xpedite5170.c new file mode 100644 index 0000000..f4231a9 --- /dev/null +++ b/board/xes/xpedite5170/xpedite5170.c @@ -0,0 +1,111 @@ +/* + * Copyright 2009 Extreme Engineering Solutions, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/processor.h> +#include <asm/mmu.h> +#include <asm/io.h> +#include <fdt_support.h> +#include <pca953x.h> + +#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_PCI) +extern void ft_board_pci_setup(void *blob, bd_t *bd); +#endif + +int checkboard(void) +{ + char *s; + + printf("Board: X-ES %s 3U VPX SBC\n", CONFIG_SYS_BOARD_NAME); + printf(" "); + s = getenv("board_rev"); + if (s) + printf("Rev %s, ", s); + s = getenv("serial#"); + if (s) + printf("Serial# %s, ", s); + s = getenv("board_cfg"); + if (s) + printf("Cfg %s", s); + printf("\n"); + + return 0; +} +/* + * Print out which flash was booted from and if booting from the 2nd flash, + * swap flash chip selects to maintain consistent flash numbering/addresses. + */ +static void flash_cs_fixup(void) +{ + immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; + ccsr_lbc_t *lbc = &immap->im_lbc; + int flash_sel; + + /* + * Print boot dev and swap flash flash chip selects if booted from 2nd + * flash. Swapping chip selects presents user with a common memory + * map regardless of which flash was booted from. + */ + flash_sel = !((pca953x_get_val(CONFIG_SYS_I2C_PCA953X_ADDR0) & + CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS)); + printf("FLASH: Executed from FLASH%d\n", flash_sel ? 2 : 1); + + if (flash_sel) { + out_be32(&lbc->br0, CONFIG_SYS_BR1_PRELIM); + out_be32(&lbc->or0, CONFIG_SYS_OR1_PRELIM); + + out_be32(&lbc->br1, CONFIG_SYS_BR0_PRELIM); + out_be32(&lbc->or1, CONFIG_SYS_OR0_PRELIM); + } +} + +int board_early_init_r(void) +{ + /* Initialize PCA9557 devices */ + pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR0, 0xff, 0); + pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR1, 0xff, 0); + pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR2, 0xff, 0); + pca953x_set_pol(CONFIG_SYS_I2C_PCA953X_ADDR3, 0xff, 0); + + flash_cs_fixup(); + + return 0; +} + +#if defined(CONFIG_OF_BOARD_SETUP) +void ft_board_setup(void *blob, bd_t *bd) +{ +#ifdef CONFIG_PCI + ft_board_pci_setup(blob, bd); +#endif + ft_cpu_setup(blob, bd); +} +#endif + +#ifdef CONFIG_MP +extern void cpu_mp_lmb_reserve(struct lmb *lmb); + +void board_lmb_reserve(struct lmb *lmb) +{ + cpu_mp_lmb_reserve(lmb); +} +#endif diff --git a/common/serial.c b/common/serial.c index dd80e7c..5d0a73c 100644 --- a/common/serial.c +++ b/common/serial.c @@ -40,7 +40,8 @@ struct serial_device *__default_serial_console (void) return &serial_scc_device; #elif defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) \ || defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) \ - || defined(CONFIG_MPC5xxx) + || defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC83xx) \ + || defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) #if defined(CONFIG_CONS_INDEX) && defined(CONFIG_SYS_NS16550_SERIAL) #if (CONFIG_CONS_INDEX==1) return &eserial1_device; diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index c4331ae..e38a372 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -276,91 +276,6 @@ void watchdog_reset (void) } #endif -#if defined(CONFIG_DDR_ECC) -void dma_init(void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile dma83xx_t *dma = &immap->dma; - volatile u32 status = swab32(dma->dmasr0); - volatile u32 dmamr0 = swab32(dma->dmamr0); - - debug("DMA-init\n"); - - /* initialize DMASARn, DMADAR and DMAABCRn */ - dma->dmadar0 = (u32)0; - dma->dmasar0 = (u32)0; - dma->dmabcr0 = 0; - - __asm__ __volatile__ ("sync"); - __asm__ __volatile__ ("isync"); - - /* clear CS bit */ - dmamr0 &= ~DMA_CHANNEL_START; - dma->dmamr0 = swab32(dmamr0); - __asm__ __volatile__ ("sync"); - __asm__ __volatile__ ("isync"); - - /* while the channel is busy, spin */ - while(status & DMA_CHANNEL_BUSY) { - status = swab32(dma->dmasr0); - } - - debug("DMA-init end\n"); -} - -uint dma_check(void) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile dma83xx_t *dma = &immap->dma; - volatile u32 status = swab32(dma->dmasr0); - volatile u32 byte_count = swab32(dma->dmabcr0); - - /* while the channel is busy, spin */ - while (status & DMA_CHANNEL_BUSY) { - status = swab32(dma->dmasr0); - } - - if (status & DMA_CHANNEL_TRANSFER_ERROR) { - printf ("DMA Error: status = %x @ %d\n", status, byte_count); - } - - return status; -} - -int dma_xfer(void *dest, u32 count, void *src) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile dma83xx_t *dma = &immap->dma; - volatile u32 dmamr0; - - /* initialize DMASARn, DMADAR and DMAABCRn */ - dma->dmadar0 = swab32((u32)dest); - dma->dmasar0 = swab32((u32)src); - dma->dmabcr0 = swab32(count); - - __asm__ __volatile__ ("sync"); - __asm__ __volatile__ ("isync"); - - /* init direct transfer, clear CS bit */ - dmamr0 = (DMA_CHANNEL_TRANSFER_MODE_DIRECT | - DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B | - DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN); - - dma->dmamr0 = swab32(dmamr0); - - __asm__ __volatile__ ("sync"); - __asm__ __volatile__ ("isync"); - - /* set CS to start DMA transfer */ - dmamr0 |= DMA_CHANNEL_START; - dma->dmamr0 = swab32(dmamr0); - __asm__ __volatile__ ("sync"); - __asm__ __volatile__ ("isync"); - - return ((int)dma_check()); -} -#endif /*CONFIG_DDR_ECC*/ - /* * Initializes on-chip ethernet controllers. * to override, implement board_eth_init() diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 4704d20..0f61180 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -64,13 +64,6 @@ void board_add_ram_info(int use_default) } #ifdef CONFIG_SPD_EEPROM - -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) -extern void dma_init(void); -extern uint dma_check(void); -extern int dma_xfer(void *dest, uint count, void *src); -#endif - #ifndef CONFIG_SYS_READ_SPD #define CONFIG_SYS_READ_SPD i2c_read #endif @@ -830,7 +823,7 @@ long int spd_sdram() } #endif /* CONFIG_SPD_EEPROM */ -#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC) +#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) /* * Use timebase counter, get_timer() is not availabe * at this point of initialization yet. @@ -863,7 +856,6 @@ static __inline__ unsigned long get_tbms (void) /* * Initialize all of memory for ECC, then enable errors. */ -/* #define CONFIG_DDR_ECC_INIT_VIA_DMA */ void ddr_enable_ecc(unsigned int dram_size) { volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; @@ -872,46 +864,21 @@ void ddr_enable_ecc(unsigned int dram_size) register u64 *p; register uint size; unsigned int pattern[2]; -#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA) - uint i; -#endif + icache_enable(); t_start = get_tbms(); pattern[0] = 0xdeadbeef; pattern[1] = 0xdeadbeef; -#if !defined(CONFIG_DDR_ECC_INIT_VIA_DMA) +#if defined(CONFIG_DDR_ECC_INIT_VIA_DMA) + dma_meminit(pattern[0], dram_size); +#else debug("ddr init: CPU FP write method\n"); size = dram_size; for (p = 0; p < (u64*)(size); p++) { ppcDWstore((u32*)p, pattern); } __asm__ __volatile__ ("sync"); -#else - debug("ddr init: DMA method\n"); - size = 0x2000; - for (p = 0; p < (u64*)(size); p++) { - ppcDWstore((u32*)p, pattern); - } - __asm__ __volatile__ ("sync"); - - /* Initialise DMA for direct transfer */ - dma_init(); - /* Start DMA to transfer */ - dma_xfer((uint *)0x2000, 0x2000, (uint *)0); /* 8K */ - dma_xfer((uint *)0x4000, 0x4000, (uint *)0); /* 16K */ - dma_xfer((uint *)0x8000, 0x8000, (uint *)0); /* 32K */ - dma_xfer((uint *)0x10000, 0x10000, (uint *)0); /* 64K */ - dma_xfer((uint *)0x20000, 0x20000, (uint *)0); /* 128K */ - dma_xfer((uint *)0x40000, 0x40000, (uint *)0); /* 256K */ - dma_xfer((uint *)0x80000, 0x80000, (uint *)0); /* 512K */ - dma_xfer((uint *)0x100000, 0x100000, (uint *)0); /* 1M */ - dma_xfer((uint *)0x200000, 0x200000, (uint *)0); /* 2M */ - dma_xfer((uint *)0x400000, 0x400000, (uint *)0); /* 4M */ - - for (i = 1; i < dram_size / 0x800000; i++) { - dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0); - } #endif t_end = get_tbms(); diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index d88c564..28c6119 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -264,53 +264,6 @@ reset_85xx_watchdog(void) } #endif /* CONFIG_WATCHDOG */ -#if defined(CONFIG_DDR_ECC) -void dma_init(void) { - volatile ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR); - volatile fsl_dma_t *dma = &dma_base->dma[0]; - - dma->satr = 0x00040000; - dma->datr = 0x00040000; - dma->sr = 0xffffffff; /* clear any errors */ - asm("sync; isync; msync"); - return; -} - -uint dma_check(void) { - volatile ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR); - volatile fsl_dma_t *dma = &dma_base->dma[0]; - volatile uint status = dma->sr; - - /* While the channel is busy, spin */ - while((status & 4) == 4) { - status = dma->sr; - } - - /* clear MR[CS] channel start bit */ - dma->mr &= 0x00000001; - asm("sync;isync;msync"); - - if (status != 0) { - printf ("DMA Error: status = %x\n", status); - } - return status; -} - -int dma_xfer(void *dest, uint count, void *src) { - volatile ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR); - volatile fsl_dma_t *dma = &dma_base->dma[0]; - - dma->dar = (uint) dest; - dma->sar = (uint) src; - dma->bcr = count; - dma->mr = 0xf000004; - asm("sync;isync;msync"); - dma->mr = 0xf000005; - asm("sync;isync;msync"); - return dma_check(); -} -#endif - /* * Configures a UPM. The function requires the respective MxMR to be set * before calling this function. "size" is the number or entries, not a sizeof. diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index c98dd8d..41de694 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -261,7 +261,9 @@ void cpu_init_f (void) #if defined(CONFIG_MPC8536) fsl_serdes_init(); #endif - +#if defined(CONFIG_FSL_DMA) + dma_init(); +#endif } diff --git a/cpu/mpc85xx/ddr-gen1.c b/cpu/mpc85xx/ddr-gen1.c index e24c9af..54437dd 100644 --- a/cpu/mpc85xx/ddr-gen1.c +++ b/cpu/mpc85xx/ddr-gen1.c @@ -66,10 +66,6 @@ void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs, } #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) -extern void dma_init(void); -extern uint dma_check(void); -extern int dma_xfer(void *dest, uint count, void *src); - /* * Initialize all of memory for ECC, then enable errors. */ @@ -77,36 +73,9 @@ extern int dma_xfer(void *dest, uint count, void *src); void ddr_enable_ecc(unsigned int dram_size) { - uint *p = 0; - uint i = 0; volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR); - dma_init(); - - for (*p = 0; p < (uint *)(8 * 1024); p++) { - if (((unsigned int)p & 0x1f) == 0) { - ppcDcbz((unsigned long) p); - } - *p = (unsigned int)CONFIG_MEM_INIT_VALUE; - if (((unsigned int)p & 0x1c) == 0x1c) { - ppcDcbf((unsigned long) p); - } - } - - dma_xfer((uint *)0x002000, 0x002000, (uint *)0); /* 8K */ - dma_xfer((uint *)0x004000, 0x004000, (uint *)0); /* 16K */ - dma_xfer((uint *)0x008000, 0x008000, (uint *)0); /* 32K */ - dma_xfer((uint *)0x010000, 0x010000, (uint *)0); /* 64K */ - dma_xfer((uint *)0x020000, 0x020000, (uint *)0); /* 128k */ - dma_xfer((uint *)0x040000, 0x040000, (uint *)0); /* 256k */ - dma_xfer((uint *)0x080000, 0x080000, (uint *)0); /* 512k */ - dma_xfer((uint *)0x100000, 0x100000, (uint *)0); /* 1M */ - dma_xfer((uint *)0x200000, 0x200000, (uint *)0); /* 2M */ - dma_xfer((uint *)0x400000, 0x400000, (uint *)0); /* 4M */ - - for (i = 1; i < dram_size / 0x800000; i++) { - dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0); - } + dma_meminit(CONFIG_MEM_INIT_VALUE, dram_size); /* * Enable errors for ECC. diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index d47cc5e..bc64286 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -31,6 +31,21 @@ #include <tsec.h> #include <asm/fsl_law.h> +struct cpu_type cpu_type_list [] = { + CPU_TYPE_ENTRY(8610, 8610), + CPU_TYPE_ENTRY(8641, 8641), + CPU_TYPE_ENTRY(8641D, 8641D), +}; + +struct cpu_type *identify_cpu(u32 ver) +{ + int i; + for (i = 0; i < ARRAY_SIZE(cpu_type_list); i++) + if (cpu_type_list[i].soc_ver == ver) + return &cpu_type_list[i]; + + return NULL; +} /* * Default board reset function @@ -53,6 +68,7 @@ checkcpu(void) char buf1[32], buf2[32]; volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile ccsr_gur_t *gur = &immap->im_gur; + struct cpu_type *cpu; uint msscr0 = mfspr(MSSCR0); svr = get_svr(); @@ -62,20 +78,13 @@ checkcpu(void) puts("CPU: "); - switch (ver) { - case SVR_8641: - puts("8641"); - break; - case SVR_8641D: - puts("8641D"); - break; - case SVR_8610: - puts("8610"); - break; - default: + cpu = identify_cpu(ver); + if (cpu) { + puts(cpu->name); + } else { puts("Unknown"); - break; } + printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr); puts("Core: "); @@ -177,61 +186,6 @@ watchdog_reset(void) } #endif /* CONFIG_WATCHDOG */ - -#if defined(CONFIG_DDR_ECC) -void -dma_init(void) -{ - volatile ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR); - volatile fsl_dma_t *dma = &dma_base->dma[0]; - - dma->satr = 0x00040000; - dma->datr = 0x00040000; - dma->sr = 0xffffffff; /* clear any errors */ - asm("sync; isync"); -} - -uint -dma_check(void) -{ - volatile ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR); - volatile fsl_dma_t *dma = &dma_base->dma[0]; - volatile uint status = dma->sr; - - /* While the channel is busy, spin */ - while ((status & 4) == 4) { - status = dma->sr; - } - - /* clear MR[CS] channel start bit */ - dma->mr &= 0x00000001; - asm("sync;isync"); - - if (status != 0) { - printf("DMA Error: status = %x\n", status); - } - return status; -} - -int -dma_xfer(void *dest, uint count, void *src) -{ - volatile ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR); - volatile fsl_dma_t *dma = &dma_base->dma[0]; - - dma->dar = (uint) dest; - dma->sar = (uint) src; - dma->bcr = count; - dma->mr = 0xf000004; - asm("sync;isync"); - dma->mr = 0xf000005; - asm("sync;isync"); - return dma_check(); -} - -#endif /* CONFIG_DDR_ECC */ - - /* * Print out the state of various machine registers. * Currently prints out LAWs, BR0/OR0, and BATs diff --git a/cpu/mpc86xx/cpu_init.c b/cpu/mpc86xx/cpu_init.c index 49528aa..341e815 100644 --- a/cpu/mpc86xx/cpu_init.c +++ b/cpu/mpc86xx/cpu_init.c @@ -113,6 +113,9 @@ void cpu_init_f(void) memctl->or7 = CONFIG_SYS_OR7_PRELIM; memctl->br7 = CONFIG_SYS_BR7_PRELIM; #endif +#if defined(CONFIG_FSL_DMA) + dma_init(); +#endif /* enable the timebase bit in HID0 */ set_hid0(get_hid0() | 0x4000000); diff --git a/cpu/mpc8xxx/ddr/ddr3_dimm_params.c b/cpu/mpc8xxx/ddr/ddr3_dimm_params.c index 8d686ac..13d234e 100644 --- a/cpu/mpc8xxx/ddr/ddr3_dimm_params.c +++ b/cpu/mpc8xxx/ddr/ddr3_dimm_params.c @@ -68,7 +68,7 @@ compute_ranksize(const ddr3_spd_eeprom_t *spd) if ((spd->organization & 0x7) < 4) nbit_sdram_width = (spd->organization & 0x7) + 2; - bsize = 1 << (nbit_sdram_cap_bsize - 3 + bsize = 1ULL << (nbit_sdram_cap_bsize - 3 + nbit_primary_bus_width - nbit_sdram_width); debug("DDR: DDR III rank density = 0x%08x\n", bsize); diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index cf29efa..36d99f9 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)libdma.a COBJS-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o +COBJS-$(CONFIG_FSL_DMA) += fsl_dma.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/dma/fsl_dma.c b/drivers/dma/fsl_dma.c new file mode 100644 index 0000000..df33e7a --- /dev/null +++ b/drivers/dma/fsl_dma.c @@ -0,0 +1,178 @@ +/* + * Copyright 2004,2007,2008 Freescale Semiconductor, Inc. + * (C) Copyright 2002, 2003 Motorola Inc. + * Xianghua Xiao (X.Xiao@motorola.com) + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <common.h> +#include <asm/io.h> +#include <asm/fsl_dma.h> + +/* Controller can only transfer 2^26 - 1 bytes at a time */ +#define FSL_DMA_MAX_SIZE (0x3ffffff) + +#if defined(CONFIG_MPC83xx) +#define FSL_DMA_MR_DEFAULT (FSL_DMA_MR_CTM_DIRECT | FSL_DMA_MR_DMSEN) +#else +#define FSL_DMA_MR_DEFAULT (FSL_DMA_MR_BWC_DIS | FSL_DMA_MR_CTM_DIRECT) +#endif + + +#if defined(CONFIG_MPC83xx) +dma83xx_t *dma_base = (void *)(CONFIG_SYS_MPC83xx_DMA_ADDR); +#elif defined(CONFIG_MPC85xx) +ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC85xx_DMA_ADDR); +#elif defined(CONFIG_MPC86xx) +ccsr_dma_t *dma_base = (void *)(CONFIG_SYS_MPC86xx_DMA_ADDR); +#else +#error "Freescale DMA engine not supported on your processor" +#endif + +static void dma_sync(void) +{ +#if defined(CONFIG_MPC85xx) + asm("sync; isync; msync"); +#elif defined(CONFIG_MPC86xx) + asm("sync; isync"); +#endif +} + +static void out_dma32(volatile unsigned *addr, int val) +{ +#if defined(CONFIG_MPC83xx) + out_le32(addr, val); +#else + out_be32(addr, val); +#endif +} + +static uint in_dma32(volatile unsigned *addr) +{ +#if defined(CONFIG_MPC83xx) + return in_le32(addr); +#else + return in_be32(addr); +#endif +} + +static uint dma_check(void) { + volatile fsl_dma_t *dma = &dma_base->dma[0]; + uint status; + + /* While the channel is busy, spin */ + do { + status = in_dma32(&dma->sr); + } while (status & FSL_DMA_SR_CB); + + /* clear MR[CS] channel start bit */ + out_dma32(&dma->mr, in_dma32(&dma->mr) & ~FSL_DMA_MR_CS); + dma_sync(); + + if (status != 0) + printf ("DMA Error: status = %x\n", status); + + return status; +} + +#if !defined(CONFIG_MPC83xx) +void dma_init(void) { + volatile fsl_dma_t *dma = &dma_base->dma[0]; + + out_dma32(&dma->satr, FSL_DMA_SATR_SREAD_SNOOP); + out_dma32(&dma->datr, FSL_DMA_DATR_DWRITE_SNOOP); + out_dma32(&dma->sr, 0xffffffff); /* clear any errors */ + dma_sync(); +} +#endif + +int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t count) { + volatile fsl_dma_t *dma = &dma_base->dma[0]; + uint xfer_size; + + while (count) { + xfer_size = MIN(FSL_DMA_MAX_SIZE, count); + + out_dma32(&dma->dar, (uint) dest); + out_dma32(&dma->sar, (uint) src); + out_dma32(&dma->bcr, xfer_size); + dma_sync(); + + /* Prepare mode register */ + out_dma32(&dma->mr, FSL_DMA_MR_DEFAULT); + dma_sync(); + + /* Start the transfer */ + out_dma32(&dma->mr, FSL_DMA_MR_DEFAULT | FSL_DMA_MR_CS); + + count -= xfer_size; + src += xfer_size; + dest += xfer_size; + + dma_sync(); + + if (dma_check()) + return -1; + } + + return 0; +} + +/* + * 85xx/86xx use dma to initialize SDRAM when !CONFIG_ECC_INIT_VIA_DDRCONTROLLER + * while 83xx uses dma to initialize SDRAM when CONFIG_DDR_ECC_INIT_VIA_DMA + */ +#if ((!defined CONFIG_MPC83xx && defined(CONFIG_DDR_ECC) && \ + !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)) || \ + (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA))) +void dma_meminit(uint val, uint size) +{ + uint *p = 0; + uint i = 0; + + for (*p = 0; p < (uint *)(8 * 1024); p++) { + if (((uint)p & 0x1f) == 0) + ppcDcbz((ulong)p); + + *p = (uint)CONFIG_MEM_INIT_VALUE; + + if (((uint)p & 0x1c) == 0x1c) + ppcDcbf((ulong)p); + } + + dmacpy(0x002000, 0, 0x002000); /* 8K */ + dmacpy(0x004000, 0, 0x004000); /* 16K */ + dmacpy(0x008000, 0, 0x008000); /* 32K */ + dmacpy(0x010000, 0, 0x010000); /* 64K */ + dmacpy(0x020000, 0, 0x020000); /* 128K */ + dmacpy(0x040000, 0, 0x040000); /* 256K */ + dmacpy(0x080000, 0, 0x080000); /* 512K */ + dmacpy(0x100000, 0, 0x100000); /* 1M */ + dmacpy(0x200000, 0, 0x200000); /* 2M */ + dmacpy(0x400000, 0, 0x400000); /* 4M */ + + for (i = 1; i < size / 0x800000; i++) + dmacpy((0x800000 * i), 0, 0x800000); +} +#endif diff --git a/drivers/i2c/bfin-twi_i2c.c b/drivers/i2c/bfin-twi_i2c.c index cfe55cd..e790634 100644 --- a/drivers/i2c/bfin-twi_i2c.c +++ b/drivers/i2c/bfin-twi_i2c.c @@ -164,7 +164,7 @@ static int i2c_transfer(uchar chip, uint addr, int alen, uchar *buffer, int len, /* prime the pump */ if (msg.alen) { - len = msg.alen; + len = (msg.flags & I2C_M_COMBO) ? msg.alen : msg.alen + len; debugi("first byte=0x%02x", *msg.abuf); bfin_write_TWI_XMT_DATA8(*(msg.abuf++)); --msg.alen; @@ -275,7 +275,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) * @chip: i2c chip addr * @addr: memory (register) address in the chip * @alen: byte size of address - * @buffer: buffer to store data read from chip + * @buffer: buffer holding data to write to chip * @len: how many bytes to write * @return: 0 on success, non-0 on failure */ diff --git a/drivers/mtd/spi/macronix.c b/drivers/mtd/spi/macronix.c index 9464c84..fe1310b 100644 --- a/drivers/mtd/spi/macronix.c +++ b/drivers/mtd/spi/macronix.c @@ -49,18 +49,10 @@ #define CMD_MX25XX_DP 0xb9 /* Deep Power-down */ #define CMD_MX25XX_RES 0xab /* Release from DP, and Read Signature */ -#define MXIC_ID_MX2516 0x15 -#define MXIC_ID_MX2520 0x12 -#define MXIC_ID_MX2532 0x16 -#define MXIC_ID_MX2540 0x13 -#define MXIC_ID_MX2564 0x17 -#define MXIC_ID_MX2580 0x14 -#define MXIC_ID_MX25128 0x18 - #define MACRONIX_SR_WIP (1 << 0) /* Write-in-Progress */ struct macronix_spi_flash_params { - u8 idcode1; + u16 idcode; u16 page_size; u16 pages_per_sector; u16 sectors_per_block; @@ -81,13 +73,45 @@ static inline struct macronix_spi_flash *to_macronix_spi_flash(struct spi_flash static const struct macronix_spi_flash_params macronix_spi_flash_table[] = { { - .idcode1 = MXIC_ID_MX25128, + .idcode = 0x2015, + .page_size = 256, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 32, + .name = "MX25L1605D", + }, + { + .idcode = 0x2016, + .page_size = 256, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 64, + .name = "MX25L3205D", + }, + { + .idcode = 0x2017, + .page_size = 256, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 128, + .name = "MX25L6405D", + }, + { + .idcode = 0x2018, .page_size = 256, .pages_per_sector = 16, .sectors_per_block = 16, .nr_blocks = 256, .name = "MX25L12805D", }, + { + .idcode = 0x2618, + .page_size = 256, + .pages_per_sector = 16, + .sectors_per_block = 16, + .nr_blocks = 256, + .name = "MX25L12855E", + }, }; static int macronix_wait_ready(struct spi_flash *flash, unsigned long timeout) @@ -277,15 +301,16 @@ struct spi_flash *spi_flash_probe_macronix(struct spi_slave *spi, u8 *idcode) const struct macronix_spi_flash_params *params; struct macronix_spi_flash *mcx; unsigned int i; + u16 id = idcode[2] | idcode[1] << 8; for (i = 0; i < ARRAY_SIZE(macronix_spi_flash_table); i++) { params = ¯onix_spi_flash_table[i]; - if (params->idcode1 == idcode[2]) + if (params->idcode == id) break; } if (i == ARRAY_SIZE(macronix_spi_flash_table)) { - debug("SF: Unsupported Macronix ID %02x\n", idcode[1]); + debug("SF: Unsupported Macronix ID %04x\n", id); return NULL; } diff --git a/drivers/mtd/spi/sst.c b/drivers/mtd/spi/sst.c index 62236d4..50e9299 100644 --- a/drivers/mtd/spi/sst.c +++ b/drivers/mtd/spi/sst.c @@ -55,20 +55,36 @@ static inline struct sst_spi_flash *to_sst_spi_flash(struct spi_flash *flash) #define SST_SECTOR_SIZE (4 * 1024) static const struct sst_spi_flash_params sst_spi_flash_table[] = { { - .idcode1 = 0x01, + .idcode1 = 0x8d, .nr_sectors = 128, + .name = "SST25VF040B", + },{ + .idcode1 = 0x8e, + .nr_sectors = 256, + .name = "SST25VF080B", + },{ + .idcode1 = 0x41, + .nr_sectors = 512, + .name = "SST25VF016B", + },{ + .idcode1 = 0x4a, + .nr_sectors = 1024, + .name = "SST25VF032B", + },{ + .idcode1 = 0x01, + .nr_sectors = 16, .name = "SST25WF512", },{ .idcode1 = 0x02, - .nr_sectors = 256, + .nr_sectors = 32, .name = "SST25WF010", },{ .idcode1 = 0x03, - .nr_sectors = 512, + .nr_sectors = 64, .name = "SST25WF020", },{ .idcode1 = 0x04, - .nr_sectors = 1024, + .nr_sectors = 128, .name = "SST25WF040", }, }; diff --git a/include/asm-ppc/config.h b/include/asm-ppc/config.h index 0900f65..ca143c7 100644 --- a/include/asm-ppc/config.h +++ b/include/asm-ppc/config.h @@ -29,4 +29,12 @@ #endif #endif +#ifndef CONFIG_FSL_DMA +#if ((!defined CONFIG_MPC83xx && defined(CONFIG_DDR_ECC) && \ + !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)) || \ + (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA))) +#define CONFIG_FSL_DMA #endif +#endif + +#endif /* _ASM_CONFIG_H_ */ diff --git a/include/asm-ppc/fsl_dma.h b/include/asm-ppc/fsl_dma.h index aab8720..1164191 100644 --- a/include/asm-ppc/fsl_dma.h +++ b/include/asm-ppc/fsl_dma.h @@ -27,14 +27,95 @@ #include <asm/types.h> +#ifdef CONFIG_MPC83xx typedef struct fsl_dma { uint mr; /* DMA mode register */ +#define FSL_DMA_MR_CS 0x00000001 /* Channel start */ +#define FSL_DMA_MR_CC 0x00000002 /* Channel continue */ +#define FSL_DMA_MR_CTM 0x00000004 /* Channel xfer mode */ +#define FSL_DMA_MR_CTM_DIRECT 0x00000004 /* Direct channel xfer mode */ +#define FSL_DMA_MR_EOTIE 0x00000080 /* End-of-transfer interrupt en */ +#define FSL_DMA_MR_PRC_MASK 0x00000c00 /* PCI read command */ +#define FSL_DMA_MR_SAHE 0x00001000 /* Source addr hold enable */ +#define FSL_DMA_MR_DAHE 0x00002000 /* Dest addr hold enable */ +#define FSL_DMA_MR_SAHTS_MASK 0x0000c000 /* Source addr hold xfer size */ +#define FSL_DMA_MR_DAHTS_MASK 0x00030000 /* Dest addr hold xfer size */ +#define FSL_DMA_MR_EMS_EN 0x00040000 /* Ext master start en */ +#define FSL_DMA_MR_IRQS 0x00080000 /* Interrupt steer */ +#define FSL_DMA_MR_DMSEN 0x00100000 /* Direct mode snooping en */ +#define FSL_DMA_MR_BWC_MASK 0x00e00000 /* Bandwidth/pause ctl */ +#define FSL_DMA_MR_DRCNT 0x0f000000 /* DMA request count */ uint sr; /* DMA status register */ +#define FSL_DMA_SR_EOCDI 0x00000001 /* End-of-chain/direct interrupt */ +#define FSL_DMA_SR_EOSI 0x00000002 /* End-of-segment interrupt */ +#define FSL_DMA_SR_CB 0x00000004 /* Channel busy */ +#define FSL_DMA_SR_TE 0x00000080 /* Transfer error */ + uint cdar; /* DMA current descriptor address register */ + char res0[4]; + uint sar; /* DMA source address register */ + char res1[4]; + uint dar; /* DMA destination address register */ + char res2[4]; + uint bcr; /* DMA byte count register */ + uint ndar; /* DMA next descriptor address register */ + uint gsr; /* DMA general status register (DMA3 ONLY!) */ + char res3[84]; +} fsl_dma_t; +#else +typedef struct fsl_dma { + uint mr; /* DMA mode register */ +#define FSL_DMA_MR_CS 0x00000001 /* Channel start */ +#define FSL_DMA_MR_CC 0x00000002 /* Channel continue */ +#define FSL_DMA_MR_CTM 0x00000004 /* Channel xfer mode */ +#define FSL_DMA_MR_CTM_DIRECT 0x00000004 /* Direct channel xfer mode */ +#define FSL_DMA_MR_CA 0x00000008 /* Channel abort */ +#define FSL_DMA_MR_CDSM 0x00000010 +#define FSL_DMA_MR_XFE 0x00000020 /* Extended features en */ +#define FSL_DMA_MR_EIE 0x00000040 /* Error interrupt en */ +#define FSL_DMA_MR_EOLSIE 0x00000080 /* End-of-lists interrupt en */ +#define FSL_DMA_MR_EOLNIE 0x00000100 /* End-of-links interrupt en */ +#define FSL_DMA_MR_EOSIE 0x00000200 /* End-of-seg interrupt en */ +#define FSL_DMA_MR_SRW 0x00000400 /* Single register write */ +#define FSL_DMA_MR_SAHE 0x00001000 /* Source addr hold enable */ +#define FSL_DMA_MR_DAHE 0x00002000 /* Dest addr hold enable */ +#define FSL_DMA_MR_SAHTS_MASK 0x0000c000 /* Source addr hold xfer size */ +#define FSL_DMA_MR_DAHTS_MASK 0x00030000 /* Dest addr hold xfer size */ +#define FSL_DMA_MR_EMS_EN 0x00040000 /* Ext master start en */ +#define FSL_DMA_MR_EMP_EN 0x00200000 /* Ext master pause en */ +#define FSL_DMA_MR_BWC_MASK 0x0f000000 /* Bandwidth/pause ctl */ +#define FSL_DMA_MR_BWC_DIS 0x0f000000 /* Bandwidth/pause ctl disable */ + uint sr; /* DMA status register */ +#define FSL_DMA_SR_EOLSI 0x00000001 /* End-of-list interrupt */ +#define FSL_DMA_SR_EOSI 0x00000002 /* End-of-segment interrupt */ +#define FSL_DMA_SR_CB 0x00000004 /* Channel busy */ +#define FSL_DMA_SR_EOLNI 0x00000008 /* End-of-links interrupt */ +#define FSL_DMA_SR_PE 0x00000010 /* Programming error */ +#define FSL_DMA_SR_CH 0x00000020 /* Channel halted */ +#define FSL_DMA_SR_TE 0x00000080 /* Transfer error */ char res0[4]; uint clndar; /* DMA current link descriptor address register */ uint satr; /* DMA source attributes register */ +#define FSL_DMA_SATR_ESAD_MASK 0x000001ff /* Extended source addr */ +#define FSL_DMA_SATR_SREAD_NO_SNOOP 0x00040000 /* Read, don't snoop */ +#define FSL_DMA_SATR_SREAD_SNOOP 0x00050000 /* Read, snoop */ +#define FSL_DMA_SATR_SREAD_UNLOCK 0x00070000 /* Read, unlock l2 */ +#define FSL_DMA_SATR_STRAN_MASK 0x00f00000 /* Source interface */ +#define FSL_DMA_SATR_SSME 0x01000000 /* Source stride en */ +#define FSL_DMA_SATR_SPCIORDER 0x02000000 /* PCI transaction order */ +#define FSL_DMA_SATR_STFLOWLVL_MASK 0x0c000000 /* RIO flow level */ +#define FSL_DMA_SATR_SBPATRMU 0x20000000 /* Bypass ATMU */ uint sar; /* DMA source address register */ uint datr; /* DMA destination attributes register */ +#define FSL_DMA_DATR_EDAD_MASK 0x000001ff /* Extended dest addr */ +#define FSL_DMA_DATR_DWRITE_NO_SNOOP 0x00040000 /* Write, don't snoop */ +#define FSL_DMA_DATR_DWRITE_SNOOP 0x00050000 /* Write, snoop */ +#define FSL_DMA_DATR_DWRITE_ALLOC 0x00060000 /* Write, alloc l2 */ +#define FSL_DMA_DATR_DWRITE_LOCK 0x00070000 /* Write, lock l2 */ +#define FSL_DMA_DATR_DTRAN_MASK 0x00f00000 /* Dest interface */ +#define FSL_DMA_DATR_DSME 0x01000000 /* Dest stride en */ +#define FSL_DMA_DATR_DPCIORDER 0x02000000 /* PCI transaction order */ +#define FSL_DMA_DATR_DTFLOWLVL_MASK 0x0c000000 /* RIO flow level */ +#define FSL_DMA_DATR_DBPATRMU 0x20000000 /* Bypass ATMU */ uint dar; /* DMA destination address register */ uint bcr; /* DMA byte count register */ char res1[4]; @@ -47,5 +128,14 @@ typedef struct fsl_dma { uint dsr; /* DMA destination stride register */ char res4[56]; } fsl_dma_t; +#endif /* !CONFIG_MPC83xx */ + +#ifdef CONFIG_FSL_DMA +void dma_init(void); +int dmacpy(phys_addr_t dest, phys_addr_t src, phys_size_t n); +#if (defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)) +void dma_meminit(uint val, uint size); +#endif +#endif #endif /* _ASM_DMA_H_ */ diff --git a/include/asm-ppc/immap_83xx.h b/include/asm-ppc/immap_83xx.h index 8f945a1..7c6a151 100644 --- a/include/asm-ppc/immap_83xx.h +++ b/include/asm-ppc/immap_83xx.h @@ -32,6 +32,7 @@ #include <asm/fsl_i2c.h> #include <asm/mpc8xxx_spi.h> #include <asm/fsl_lbc.h> +#include <asm/fsl_dma.h> /* * Local Access Window @@ -367,51 +368,7 @@ typedef struct dma83xx { u32 imisr; /* 0x80 Inbound message interrupt status register */ u32 imimr; /* 0x84 Inbound message interrupt mask register */ u32 res4[0x1E]; /* 0x88-0x99 reserved */ - u32 dmamr0; /* 0x100 DMA 0 mode register */ - u32 dmasr0; /* 0x104 DMA 0 status register */ - u32 dmacdar0; /* 0x108 DMA 0 current descriptor address register */ - u32 res5; /* 0x10C reserved */ - u32 dmasar0; /* 0x110 DMA 0 source address register */ - u32 res6; /* 0x114 reserved */ - u32 dmadar0; /* 0x118 DMA 0 destination address register */ - u32 res7; /* 0x11C reserved */ - u32 dmabcr0; /* 0x120 DMA 0 byte count register */ - u32 dmandar0; /* 0x124 DMA 0 next descriptor address register */ - u32 res8[0x16]; /* 0x128-0x179 reserved */ - u32 dmamr1; /* 0x180 DMA 1 mode register */ - u32 dmasr1; /* 0x184 DMA 1 status register */ - u32 dmacdar1; /* 0x188 DMA 1 current descriptor address register */ - u32 res9; /* 0x18C reserved */ - u32 dmasar1; /* 0x190 DMA 1 source address register */ - u32 res10; /* 0x194 reserved */ - u32 dmadar1; /* 0x198 DMA 1 destination address register */ - u32 res11; /* 0x19C reserved */ - u32 dmabcr1; /* 0x1A0 DMA 1 byte count register */ - u32 dmandar1; /* 0x1A4 DMA 1 next descriptor address register */ - u32 res12[0x16]; /* 0x1A8-0x199 reserved */ - u32 dmamr2; /* 0x200 DMA 2 mode register */ - u32 dmasr2; /* 0x204 DMA 2 status register */ - u32 dmacdar2; /* 0x208 DMA 2 current descriptor address register */ - u32 res13; /* 0x20C reserved */ - u32 dmasar2; /* 0x210 DMA 2 source address register */ - u32 res14; /* 0x214 reserved */ - u32 dmadar2; /* 0x218 DMA 2 destination address register */ - u32 res15; /* 0x21C reserved */ - u32 dmabcr2; /* 0x220 DMA 2 byte count register */ - u32 dmandar2; /* 0x224 DMA 2 next descriptor address register */ - u32 res16[0x16]; /* 0x228-0x279 reserved */ - u32 dmamr3; /* 0x280 DMA 3 mode register */ - u32 dmasr3; /* 0x284 DMA 3 status register */ - u32 dmacdar3; /* 0x288 DMA 3 current descriptor address register */ - u32 res17; /* 0x28C reserved */ - u32 dmasar3; /* 0x290 DMA 3 source address register */ - u32 res18; /* 0x294 reserved */ - u32 dmadar3; /* 0x298 DMA 3 destination address register */ - u32 res19; /* 0x29C reserved */ - u32 dmabcr3; /* 0x2A0 DMA 3 byte count register */ - u32 dmandar3; /* 0x2A4 DMA 3 next descriptor address register */ - u32 dmagsr; /* 0x2A8 DMA general status register */ - u32 res20[0x15]; /* 0x2AC-0x2FF reserved */ + struct fsl_dma dma[4]; } dma83xx_t; /* @@ -895,6 +852,8 @@ typedef struct immap { } immap_t; #endif +#define CONFIG_SYS_MPC83xx_DMA_OFFSET (0x8000) +#define CONFIG_SYS_MPC83xx_DMA_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_DMA_OFFSET) #define CONFIG_SYS_MPC83xx_ESDHC_OFFSET (0x2e000) #define CONFIG_SYS_MPC83xx_ESDHC_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC83xx_ESDHC_OFFSET) #define CONFIG_SYS_MPC83xx_USB_OFFSET 0x23000 diff --git a/include/asm-ppc/immap_85xx.h b/include/asm-ppc/immap_85xx.h index db2bdf0..0efef05 100644 --- a/include/asm-ppc/immap_85xx.h +++ b/include/asm-ppc/immap_85xx.h @@ -341,6 +341,15 @@ typedef struct ccsr_pcix { char res11[476]; } ccsr_pcix_t; +typedef struct ccsr_gpio { + uint gpdir; + uint gpodr; + uint gpdat; + uint gpier; + uint gpimr; + uint gpicr; +} ccsr_gpio_t; + #define PCIX_COMMAND 0x62 #define POWAR_EN 0x80000000 #define POWAR_IO_READ 0x00080000 @@ -1648,6 +1657,8 @@ typedef struct ccsr_gur { #define CONFIG_SYS_MPC85xx_PCIX_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX_OFFSET) #define CONFIG_SYS_MPC85xx_PCIX2_OFFSET (0x9000) #define CONFIG_SYS_MPC85xx_PCIX2_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIX2_OFFSET) +#define CONFIG_SYS_MPC85xx_GPIO_OFFSET (0xF000) +#define CONFIG_SYS_MPC85xx_GPIO_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_GPIO_OFFSET) #define CONFIG_SYS_MPC85xx_SATA1_OFFSET (0x18000) #define CONFIG_SYS_MPC85xx_SATA1_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SATA1_OFFSET) #define CONFIG_SYS_MPC85xx_SATA2_OFFSET (0x19000) diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index e7db1c6..65546ad 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -1021,7 +1021,7 @@ struct cpu_type { struct cpu_type *identify_cpu(u32 ver); -#if defined(CONFIG_MPC85xx) +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) #define CPU_TYPE_ENTRY(n, v) \ { .name = #n, .soc_ver = SVR_##v, } #else diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 2aba689..6f1b1a4 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -404,7 +404,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); /* controller 3, direct to uli, tgtid 3, Base address 8000 */ #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull #else #define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 @@ -423,7 +423,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); /* controller 2, Slot 2, tgtid 2, Base address 9000 */ #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull #else #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 @@ -442,7 +442,7 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); /* controller 1, Slot 1, tgtid 1, Base address a000 */ #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull #else #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h index d8042fb..035874b 100644 --- a/include/configs/MPC8641HPCN.h +++ b/include/configs/MPC8641HPCN.h @@ -335,7 +335,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCI1_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCI1_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCI1_MEM_PHYS 0x0000000c00000000ULL #else #define CONFIG_SYS_PCI1_MEM_BUS CONFIG_SYS_PCI1_MEM_VIRT diff --git a/include/configs/P2020DS.h b/include/configs/P2020DS.h index a39ff26..fddcce5 100644 --- a/include/configs/P2020DS.h +++ b/include/configs/P2020DS.h @@ -46,6 +46,7 @@ #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ +#define CONFIG_E1000 1 /* Defind e1000 pci Ethernet card*/ #define CONFIG_TSEC_ENET /* tsec ethernet support */ #define CONFIG_ENV_OVERWRITE @@ -437,7 +438,7 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); /* controller 3, Slot 1, tgtid 3, Base address b000 */ #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull #else #define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 @@ -456,7 +457,7 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); /* controller 2, direct to uli, tgtid 2, Base address 9000 */ #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE2_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull #else #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 @@ -475,7 +476,7 @@ extern unsigned long calculate_board_ddr_clk(unsigned long dummy); /* controller 1, Slot 2, tgtid 1, Base address a000 */ #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 #ifdef CONFIG_PHYS_64BIT -#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull #else #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 diff --git a/include/configs/PM854.h b/include/configs/PM854.h index 3f943aa..4b9bcca 100644 --- a/include/configs/PM854.h +++ b/include/configs/PM854.h @@ -96,6 +96,7 @@ #undef CONFIG_DDR_SPD #define CONFIG_DDR_DLL /* possible DLL fix needed */ #define CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_FSL_DMA /* use DMA to init DDR ECC */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef diff --git a/include/configs/PM856.h b/include/configs/PM856.h index 43c2873..1db20bc 100644 --- a/include/configs/PM856.h +++ b/include/configs/PM856.h @@ -98,6 +98,7 @@ #undef CONFIG_DDR_SPD #define CONFIG_DDR_DLL /* possible DLL fix needed */ #define CONFIG_DDR_ECC /* only for ECC DDR module */ +#define CONFIG_FSL_DMA /* use DMA to init DDR ECC */ #define CONFIG_MEM_INIT_VALUE 0xDeadBeef diff --git a/include/configs/XPEDITE5170.h b/include/configs/XPEDITE5170.h new file mode 100644 index 0000000..2553293 --- /dev/null +++ b/include/configs/XPEDITE5170.h @@ -0,0 +1,756 @@ +/* + * Copyright 2009 Extreme Engineering Solutions, Inc. + * Copyright 2007-2008 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * xpedite5170 board configuration file + */ +#ifndef __CONFIG_H +#define __CONFIG_H + +/* + * High Level Configuration Options + */ +#define CONFIG_MPC86xx 1 /* MPC86xx */ +#define CONFIG_MPC8641 1 /* MPC8641 specific */ +#define CONFIG_XPEDITE5140 1 /* MPC8641HPCN board specific */ +#define CONFIG_SYS_BOARD_NAME "XPedite5170" +#define CONFIG_NUM_CPUS 1 /* Number of CPUs in the system */ +#define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ +#define CONFIG_BOARD_EARLY_INIT_R /* Call board_pre_init */ +#define CONFIG_RELOC_FIXUP_WORKS /* Fully relocate to SDRAM */ +#define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ +#define CONFIG_ALTIVEC 1 + +#define CONFIG_PCI 1 /* Enable PCI/PCIE */ +#define CONFIG_PCI_PNP 1 /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW 1 /* show pci devices on startup */ +#define CONFIG_PCIE1 1 /* PCIE controler 1 */ +#define CONFIG_PCIE2 1 /* PCIE controler 2 */ +#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ +#define CONFIG_FSL_LAW 1 /* Use common FSL init code */ + +/* + * DDR config + */ +#define CONFIG_FSL_DDR2 +#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#define CONFIG_DDR_SPD +#define CONFIG_MEM_INIT_VALUE 0xdeadbeef +#define SPD_EEPROM_ADDRESS1 0x54 /* Both channels use the */ +#define SPD_EEPROM_ADDRESS2 0x54 /* same SPD data */ +#define SPD_EEPROM_OFFSET 0x200 /* OFFSET of SPD in EEPROM */ +#define CONFIG_NUM_DDR_CONTROLLERS 2 +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL 1 +#define CONFIG_DDR_ECC +#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_MAX_DDR_BAT_SIZE 0x80000000 /* BAT mapping size */ + +/* + * virtual address to be used for temporary mappings. There + * should be 128k free at this VA. + */ +#define CONFIG_SYS_SCRATCH_VA 0xe0000000 + +#ifndef __ASSEMBLY__ +extern unsigned long get_board_sys_clk(unsigned long dummy); +#endif + +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC86xx */ + +/* + * L2CR setup + */ +#define CONFIG_SYS_L2 +#define L2_INIT 0 +#define L2_ENABLE (L2CR_L2E) + +/* + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + */ +#define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ +#define CONFIG_SYS_CCSRBAR 0xef000000 /* relocated CCSRBAR */ +#define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR +#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR +#define CONFIG_SYS_CCSRBAR_PHYS_HIGH 0x0 +#define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR +#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR + 0x8000) +#define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR + 0x9000) + +/* + * Diagnostics + */ +#define CONFIG_SYS_ALT_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END 0x20000000 + +/* + * Memory map + * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable + * 0x8000_0000 0xbfff_ffff PCIe1 Mem 1G non-cacheable + * 0xc000_0000 0xcfff_ffff PCIe2 Mem 256M non-cacheable + * 0xe000_0000 0xe7ff_ffff SRAM/SSRAM/L1 Cache 128M non-cacheable + * 0xe800_0000 0xe87f_ffff PCIe1 IO 8M non-cacheable + * 0xe880_0000 0xe8ff_ffff PCIe2 IO 8M non-cacheable + * 0xef00_0000 0xef0f_ffff CCSR/IMMR 1M non-cacheable + * 0xef80_0000 0xef8f_ffff NAND Flash 1M non-cacheable + * 0xf000_0000 0xf7ff_ffff NOR Flash 2 128M non-cacheable + * 0xf800_0000 0xffff_ffff NOR Flash 1 128M non-cacheable + */ + +#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_2 | LCRR_EADC_3) + +/* + * NAND flash configuration + */ +#define CONFIG_SYS_NAND_BASE 0xef800000 +#define CONFIG_SYS_NAND_BASE2 0xef840000 /* Unused at this time */ +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE2} +#define CONFIG_SYS_MAX_NAND_DEVICE 2 +#define CONFIG_NAND_ACTL +#define CONFIG_SYS_NAND_ACTL_ALE (1 << 14) /* C_LA14 */ +#define CONFIG_SYS_NAND_ACTL_CLE (1 << 15) /* C_LA15 */ +#define CONFIG_SYS_NAND_ACTL_NCE 0 /* NCE not controlled by ADDR */ +#define CONFIG_SYS_NAND_ACTL_DELAY 25 +#define CONFIG_SYS_NAND_QUIET_TEST +#define CONFIG_JFFS2_NAND + +/* + * NOR flash configuration + */ +#define CONFIG_SYS_FLASH_BASE 0xf8000000 +#define CONFIG_SYS_FLASH_BASE2 0xf0000000 +#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2} +#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ +#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ +#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ +#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE +#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff00000, 0xc0000}, \ + {0xf7f00000, 0xc0000} } +#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CONFIG_SYS_MONITOR_BASE_EARLY 0xfff00000 /* early monitor loc */ + +/* + * Chip select configuration + */ +/* NOR Flash 0 on CS0 */ +#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE |\ + BR_PS_16 |\ + BR_V) +#define CONFIG_SYS_OR0_PRELIM (OR_AM_128MB |\ + OR_GPCM_CSNT |\ + OR_GPCM_XACS |\ + OR_GPCM_ACS_DIV2 |\ + OR_GPCM_SCY_8 |\ + OR_GPCM_TRLX |\ + OR_GPCM_EHTR |\ + OR_GPCM_EAD) + +/* NOR Flash 1 on CS1 */ +#define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_FLASH_BASE2 |\ + BR_PS_16 |\ + BR_V) +#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM + +/* NAND flash on CS2 */ +#define CONFIG_SYS_BR2_PRELIM (CONFIG_SYS_NAND_BASE |\ + BR_PS_8 |\ + BR_V) +#define CONFIG_SYS_OR2_PRELIM (OR_AM_256KB |\ + OR_GPCM_BCTLD |\ + OR_GPCM_CSNT |\ + OR_GPCM_ACS_DIV4 |\ + OR_GPCM_SCY_4 |\ + OR_GPCM_TRLX |\ + OR_GPCM_EHTR) + +/* Optional NAND flash on CS3 */ +#define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE2 |\ + BR_PS_8 |\ + BR_V) +#define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM + +/* + * Use L1 as initial stack + */ +#define CONFIG_SYS_INIT_RAM_LOCK 1 +#define CONFIG_SYS_INIT_RAM_ADDR 0xe0000000 +#define CONFIG_SYS_INIT_RAM_END 0x00004000 + +#define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 KB for Mon */ +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ + +/* + * Serial Port + */ +#define CONFIG_CONS_INDEX 1 +#define CONFIG_SYS_NS16550 +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK get_bus_freq(0) +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) +#define CONFIG_SYS_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} +#define CONFIG_BAUDRATE 115200 +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +/* + * Use the HUSH parser + */ +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " + +/* + * Pass open firmware flat tree + */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + +#define CONFIG_SYS_64BIT_VSPRINTF 1 +#define CONFIG_SYS_64BIT_STRTOUL 1 + +/* + * I2C + */ +#define CONFIG_FSL_I2C /* Use FSL common I2C driver */ +#define CONFIG_HARD_I2C /* I2C with hardware support */ +#define CONFIG_SYS_I2C_SPEED 100000 /* M41T00 only supports 100 KHz */ +#define CONFIG_SYS_I2C_SLAVE 0x7F +#define CONFIG_SYS_I2C_OFFSET 0x3000 +#define CONFIG_SYS_I2C2_OFFSET 0x3100 +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE + +/* PEX8518 slave I2C interface */ +#define CONFIG_SYS_I2C_PEX8518_ADDR 0x70 + +/* I2C DS1631 temperature sensor */ +#define CONFIG_SYS_I2C_DS1621_ADDR 0x48 +#define CONFIG_DTT_DS1621 +#define CONFIG_DTT_SENSORS { 0 } + +/* I2C EEPROM - AT24C128B */ +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* 64 byte pages */ +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* take up to 10 msec */ + +/* I2C RTC */ +#define CONFIG_RTC_M41T11 1 +#define CONFIG_SYS_I2C_RTC_ADDR 0x68 +#define CONFIG_SYS_M41T11_BASE_YEAR 2000 + +/* GPIO/EEPROM/SRAM */ +#define CONFIG_DS4510 +#define CONFIG_SYS_I2C_DS4510_ADDR 0x51 + +/* GPIO */ +#define CONFIG_PCA953X +#define CONFIG_SYS_I2C_PCA953X_ADDR0 0x18 +#define CONFIG_SYS_I2C_PCA953X_ADDR1 0x1c +#define CONFIG_SYS_I2C_PCA953X_ADDR2 0x1e +#define CONFIG_SYS_I2C_PCA953X_ADDR3 0x1f +#define CONFIG_SYS_I2C_PCA953X_ADDR CONFIG_SYS_I2C_PCA953X_ADDR0 + +/* + * PU = pulled high, PD = pulled low + * I = input, O = output, IO = input/output + */ +/* PCA9557 @ 0x18*/ +#define CONFIG_SYS_PCA953X_C0_SER0_EN 0x01 /* PU; UART0 enable (1: enabled) */ +#define CONFIG_SYS_PCA953X_C0_SER0_MODE 0x02 /* PU; UART0 serial mode select */ +#define CONFIG_SYS_PCA953X_C0_SER1_EN 0x04 /* PU; UART1 enable (1: enabled) */ +#define CONFIG_SYS_PCA953X_C0_SER1_MODE 0x08 /* PU; UART1 serial mode select */ +#define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS 0x10 /* PU; Boot flash CS select */ +#define CONFIG_SYS_PCA953X_NVM_WP 0x20 /* PU; Set to 0 to enable NVM writing */ + +/* PCA9557 @ 0x1c*/ +#define CONFIG_SYS_PCA953X_XMC0_ROOT0 0x01 /* PU; Low if XMC is RC */ +#define CONFIG_SYS_PCA953X_PLUG_GPIO0 0x02 /* Samtec connector GPIO */ +#define CONFIG_SYS_PCA953X_XMC0_WAKE 0x04 /* PU; XMC wake */ +#define CONFIG_SYS_PCA953X_XMC0_BIST 0x08 /* PU; XMC built in self test */ +#define CONFIG_SYS_PCA953X_XMC_PRESENT 0x10 /* PU; Low if XMC module installed */ +#define CONFIG_SYS_PCA953X_PMC_PRESENT 0x20 /* PU; Low if PMC module installed */ +#define CONFIG_SYS_PCA953X_PMC0_MONARCH 0x40 /* PMC monarch mode enable */ +#define CONFIG_SYS_PCA953X_PMC0_EREADY 0x80 /* PU; PMC PCI eready */ + +/* PCA9557 @ 0x1e*/ +#define CONFIG_SYS_PCA953X_P0_GA0 0x01 /* PU; VPX Geographical address */ +#define CONFIG_SYS_PCA953X_P0_GA1 0x02 /* PU; VPX Geographical address */ +#define CONFIG_SYS_PCA953X_P0_GA2 0x04 /* PU; VPX Geographical address */ +#define CONFIG_SYS_PCA953X_P0_GA3 0x08 /* PU; VPX Geographical address */ +#define CONFIG_SYS_PCA953X_P0_GA4 0x10 /* PU; VPX Geographical address */ +#define CONFIG_SYS_PCA953X_P0_GAP 0x20 /* PU; VPX Geographical address parity */ +#define CONFIG_SYS_PCA953X_P1_SYSEN 0x80 /* PU; VPX P1 SYSCON */ + +/* PCA9557 @ 0x1f */ +#define CONFIG_SYS_PCA953X_VPX_GPIO0 0x01 /* PU; VPX P15 GPIO */ +#define CONFIG_SYS_PCA953X_VPX_GPIO1 0x02 /* PU; VPX P15 GPIO */ +#define CONFIG_SYS_PCA953X_VPX_GPIO2 0x04 /* PU; VPX P15 GPIO */ +#define CONFIG_SYS_PCA953X_VPX_GPIO3 0x08 /* PU; VPX P15 GPIO */ + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ +/* PCIE1 - PEX8518 */ +#define CONFIG_SYS_PCIE1_MEM_BASE 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x40000000 /* 1G */ +#define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xe8000000 +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ + +/* PCIE2 - VPX P1 */ +#define CONFIG_SYS_PCIE2_MEM_BASE 0xc0000000 +#define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE +#define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ +#define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 +#define CONFIG_SYS_PCIE2_IO_PHYS 0xe8800000 +#define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 /* 8M */ + +/* + * Networking options + */ +#define CONFIG_TSEC_ENET /* tsec ethernet support */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_ETHPRIME "eTSEC1" + +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "eTSEC1" +#define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC1_PHY_ADDR 1 +#define TSEC1_PHYIDX 0 +#define CONFIG_HAS_ETH0 + +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "eTSEC2" +#define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) +#define TSEC2_PHY_ADDR 2 +#define TSEC2_PHYIDX 0 +#define CONFIG_HAS_ETH1 + +/* + * BAT mappings + */ +#if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR) +#define CONFIG_SYS_CCSR_DEFAULT_DBATL (CONFIG_SYS_CCSRBAR_DEFAULT |\ + BATL_PP_RW |\ + BATL_CACHEINHIBIT |\ + BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_CCSR_DEFAULT_DBATU (CONFIG_SYS_CCSRBAR_DEFAULT |\ + BATU_BL_1M |\ + BATU_VS |\ + BATU_VP) +#define CONFIG_SYS_CCSR_DEFAULT_IBATL (CONFIG_SYS_CCSRBAR_DEFAULT |\ + BATL_PP_RW |\ + BATL_CACHEINHIBIT) +#define CONFIG_SYS_CCSR_DEFAULT_IBATU CONFIG_SYS_CCSR_DEFAULT_DBATU +#endif + +/* + * BAT0 2G Cacheable, non-guarded + * 0x0000_0000 2G DDR + */ +#define CONFIG_SYS_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) +#define CONFIG_SYS_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) +#define CONFIG_SYS_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT0U CONFIG_SYS_DBAT0U + +/* + * BAT1 1G Cache-inhibited, guarded + * 0x8000_0000 1G PCI-Express 1 Memory + */ +#define CONFIG_SYS_DBAT1L (CONFIG_SYS_PCIE1_MEM_PHYS |\ + BATL_PP_RW |\ + BATL_CACHEINHIBIT |\ + BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCIE1_MEM_PHYS |\ + BATU_BL_1G |\ + BATU_VS |\ + BATU_VP) +#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCIE1_MEM_PHYS |\ + BATL_PP_RW |\ + BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U + +/* + * BAT2 512M Cache-inhibited, guarded + * 0xc000_0000 512M PCI-Express 2 Memory + */ +#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCIE2_MEM_PHYS |\ + BATL_PP_RW |\ + BATL_CACHEINHIBIT |\ + BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCIE2_MEM_PHYS |\ + BATU_BL_512M |\ + BATU_VS |\ + BATU_VP) +#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCIE2_MEM_PHYS |\ + BATL_PP_RW |\ + BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U + +/* + * BAT3 1M Cache-inhibited, guarded + * 0xe000_0000 1M CCSR + */ +#define CONFIG_SYS_DBAT3L (CONFIG_SYS_CCSRBAR |\ + BATL_PP_RW |\ + BATL_CACHEINHIBIT |\ + BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT3U (CONFIG_SYS_CCSRBAR |\ + BATU_BL_1M |\ + BATU_VS |\ + BATU_VP) +#define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR |\ + BATL_PP_RW |\ + BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U + +/* + * BAT4 32M Cache-inhibited, guarded + * 0xe200_0000 16M PCI-Express 1 I/O + * 0xe300_0000 16M PCI-Express 2 I/0 + */ +#define CONFIG_SYS_DBAT4L (CONFIG_SYS_PCIE1_IO_PHYS |\ + BATL_PP_RW |\ + BATL_CACHEINHIBIT |\ + BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCIE1_IO_PHYS |\ + BATU_BL_32M |\ + BATU_VS |\ + BATU_VP) +#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCIE1_IO_PHYS |\ + BATL_PP_RW |\ + BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U + +/* + * BAT5 128K Cacheable, non-guarded + * 0xe400_1000 128K Init RAM for stack in the CPU DCache (no backing memory) + */ +#define CONFIG_SYS_DBAT5L (CONFIG_SYS_INIT_RAM_ADDR |\ + BATL_PP_RW |\ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_DBAT5U (CONFIG_SYS_INIT_RAM_ADDR |\ + BATU_BL_128K |\ + BATU_VS |\ + BATU_VP) +#define CONFIG_SYS_IBAT5L CONFIG_SYS_DBAT5L +#define CONFIG_SYS_IBAT5U CONFIG_SYS_DBAT5U + +/* + * BAT6 256M Cache-inhibited, guarded + * 0xf000_0000 256M FLASH + */ +#define CONFIG_SYS_DBAT6L (CONFIG_SYS_FLASH_BASE2 |\ + BATL_PP_RW |\ + BATL_CACHEINHIBIT |\ + BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT6U (CONFIG_SYS_FLASH_BASE |\ + BATU_BL_256M |\ + BATU_VS |\ + BATU_VP) +#define CONFIG_SYS_IBAT6L (CONFIG_SYS_FLASH_BASE |\ + BATL_PP_RW |\ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT6U CONFIG_SYS_DBAT6U + +/* Map the last 1M of flash where we're running from reset */ +#define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY |\ + BATL_PP_RW |\ + BATL_CACHEINHIBIT |\ + BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT6U_EARLY (TEXT_BASE |\ + BATU_BL_1M |\ + BATU_VS |\ + BATU_VP) +#define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY |\ + BATL_PP_RW |\ + BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY + +/* + * BAT7 64M Cache-inhibited, guarded + * 0xe800_0000 64K NAND FLASH + * 0xe804_0000 128K DUART Registers + */ +#define CONFIG_SYS_DBAT7L (CONFIG_SYS_NAND_BASE |\ + BATL_PP_RW |\ + BATL_CACHEINHIBIT |\ + BATL_GUARDEDSTORAGE) +#define CONFIG_SYS_DBAT7U (CONFIG_SYS_NAND_BASE |\ + BATU_BL_512K |\ + BATU_VS |\ + BATU_VP) +#define CONFIG_SYS_IBAT7L (CONFIG_SYS_NAND_BASE |\ + BATL_PP_RW |\ + BATL_CACHEINHIBIT) +#define CONFIG_SYS_IBAT7U CONFIG_SYS_DBAT7U + +/* + * Command configuration. + */ +#include <config_cmd_default.h> + +#define CONFIG_CMD_ASKENV +#define CONFIG_CMD_DATE +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_DS4510 +#define CONFIG_CMD_DS4510_INFO +#define CONFIG_CMD_DTT +#define CONFIG_CMD_EEPROM +#define CONFIG_CMD_ELF +#define CONFIG_CMD_SAVEENV +#define CONFIG_CMD_FLASH +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IRQ +#define CONFIG_CMD_JFFS2 +#define CONFIG_CMD_MII +#define CONFIG_CMD_NAND +#define CONFIG_CMD_NET +#define CONFIG_CMD_PCA953X +#define CONFIG_CMD_PCA953X_INFO +#define CONFIG_CMD_PCI +#define CONFIG_CMD_PING +#define CONFIG_CMD_REGINFO +#define CONFIG_CMD_SNTP + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ +#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ +#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ +#define CONFIG_CMDLINE_EDITING 1 /* Command-line editing */ +#define CONFIG_LOADADDR 0x1000000 /* default location for tftp and bootm */ +#define CONFIG_BOOTDELAY 3 /* -1 disables auto-boot */ +#define CONFIG_PANIC_HANG /* do not reset board on panic */ +#define CONFIG_PREBOOT /* enable preboot variable */ +#define CONFIG_FIT 1 +#define CONFIG_FIT_VERBOSE 1 +#define CONFIG_INTEGRITY /* support booting INTEGRITY OS */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 16 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ + +/* + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +/* + * Environment Configuration + */ +#define CONFIG_ENV_IS_IN_FLASH 1 +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128k (one sector) for env */ +#define CONFIG_ENV_SIZE 0x8000 +#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) + +/* + * Flash memory map: + * fffc0000 - ffffffff Pri FDT (256KB) + * fff80000 - fffbffff Pri U-Boot Environment (256 KB) + * fff00000 - fff7ffff Pri U-Boot (512 KB) + * fef00000 - ffefffff Pri OS image (16MB) + * f8000000 - feefffff Pri OS Use/Filesystem (111MB) + * + * f7fc0000 - f7ffffff Sec FDT (256KB) + * f7f80000 - f7fbffff Sec U-Boot Environment (256 KB) + * f7f00000 - f7f7ffff Sec U-Boot (512 KB) + * f6f00000 - f7efffff Sec OS image (16MB) + * f0000000 - f6efffff Sec OS Use/Filesystem (111MB) + */ +#define CONFIG_UBOOT1_ENV_ADDR MK_STR(0xfff00000) +#define CONFIG_UBOOT2_ENV_ADDR MK_STR(0xf7f00000) +#define CONFIG_FDT1_ENV_ADDR MK_STR(0xfffc0000) +#define CONFIG_FDT2_ENV_ADDR MK_STR(0xf7fc0000) +#define CONFIG_OS1_ENV_ADDR MK_STR(0xfef00000) +#define CONFIG_OS2_ENV_ADDR MK_STR(0xf6f00000) + +#define CONFIG_PROG_UBOOT1 \ + "$download_cmd $loadaddr $ubootfile; " \ + "if test $? -eq 0; then " \ + "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; " \ + "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; " \ + "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; " \ + "if test $? -ne 0; then " \ + "echo PROGRAM FAILED; " \ + "else; " \ + "echo PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_UBOOT2 \ + "$download_cmd $loadaddr $ubootfile; " \ + "if test $? -eq 0; then " \ + "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; " \ + "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; " \ + "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; " \ + "if test $? -ne 0; then " \ + "echo PROGRAM FAILED; " \ + "else; " \ + "echo PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_BOOT_OS_NET \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "if test -n $fdtaddr; then " \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "bootm $osaddr - $fdtaddr; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi; " \ + "else; " \ + "bootm $osaddr; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_OS1 \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_OS1_ENV_ADDR" +$filesize; " \ + "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ + "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo OS PROGRAM FAILED; " \ + "else; " \ + "echo OS PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_OS2 \ + "$download_cmd $osaddr $osfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_OS2_ENV_ADDR" +$filesize; " \ + "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ + "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo OS PROGRAM FAILED; " \ + "else; " \ + "echo OS PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo OS DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_FDT1 \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;" \ + "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ + "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo FDT PROGRAM FAILED; " \ + "else; " \ + "echo FDT PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_PROG_FDT2 \ + "$download_cmd $fdtaddr $fdtfile; " \ + "if test $? -eq 0; then " \ + "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;" \ + "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ + "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; " \ + "if test $? -ne 0; then " \ + "echo FDT PROGRAM FAILED; " \ + "else; " \ + "echo FDT PROGRAM SUCCEEDED; " \ + "fi; " \ + "else; " \ + "echo FDT DOWNLOAD FAILED; " \ + "fi;" + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "autoload=yes\0" \ + "download_cmd=tftp\0" \ + "console_args=console=ttyS0,115200\0" \ + "root_args=root=/dev/nfs rw\0" \ + "misc_args=ip=on\0" \ + "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \ + "bootfile=/home/user/file\0" \ + "osfile=/home/user/uImage-XPedite5170\0" \ + "fdtfile=/home/user/xpedite5170.dtb\0" \ + "ubootfile=/home/user/u-boot.bin\0" \ + "fdtaddr=c00000\0" \ + "osaddr=0x1000000\0" \ + "loadaddr=0x1000000\0" \ + "prog_uboot1="CONFIG_PROG_UBOOT1"\0" \ + "prog_uboot2="CONFIG_PROG_UBOOT2"\0" \ + "prog_os1="CONFIG_PROG_OS1"\0" \ + "prog_os2="CONFIG_PROG_OS2"\0" \ + "prog_fdt1="CONFIG_PROG_FDT1"\0" \ + "prog_fdt2="CONFIG_PROG_FDT2"\0" \ + "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0" \ + "bootcmd_flash1=run set_bootargs; " \ + "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\ + "bootcmd_flash2=run set_bootargs; " \ + "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\ + "bootcmd=run bootcmd_flash1\0" +#endif /* __CONFIG_H */ diff --git a/include/mpc83xx.h b/include/mpc83xx.h index c5bd6cb..fd742c7 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -1041,22 +1041,6 @@ #define ECC_ERROR_MAN_SBEC (0xff000000>>24) /* Single Bit Error Counter 0..255 */ #define ECC_ERROR_MAN_SBEC_SHIFT 0 -/* DMAMR - DMA Mode Register - */ -#define DMA_CHANNEL_START 0x00000001 /* Bit - DMAMRn CS */ -#define DMA_CHANNEL_TRANSFER_MODE_DIRECT 0x00000004 /* Bit - DMAMRn CTM */ -#define DMA_CHANNEL_SOURCE_ADRESSS_HOLD_EN 0x00001000 /* Bit - DMAMRn SAHE */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_1B 0x00000000 /* 2Bit- DMAMRn SAHTS 1byte */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_2B 0x00004000 /* 2Bit- DMAMRn SAHTS 2bytes */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_4B 0x00008000 /* 2Bit- DMAMRn SAHTS 4bytes */ -#define DMA_CHANNEL_SOURCE_ADDRESS_HOLD_8B 0x0000c000 /* 2Bit- DMAMRn SAHTS 8bytes */ -#define DMA_CHANNEL_SNOOP 0x00010000 /* Bit - DMAMRn DMSEN */ - -/* DMASR - DMA Status Register - */ -#define DMA_CHANNEL_BUSY 0x00000004 /* Bit - DMASRn CB */ -#define DMA_CHANNEL_TRANSFER_ERROR 0x00000080 /* Bit - DMASRn TE */ - /* CONFIG_ADDRESS - PCI Config Address Register */ #define PCI_CONFIG_ADDRESS_EN 0x80000000 diff --git a/include/serial.h b/include/serial.h index aca5221..57223372 100644 --- a/include/serial.h +++ b/include/serial.h @@ -24,7 +24,8 @@ extern struct serial_device * default_serial_console (void); #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || defined(CONFIG_405EX) || \ - defined(CONFIG_MPC5xxx) + defined(CONFIG_MPC5xxx) || defined(CONFIG_MPC83xx) || \ + defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) extern struct serial_device serial0_device; extern struct serial_device serial1_device; #if defined(CONFIG_SYS_NS16550_SERIAL) |