diff options
| -rw-r--r-- | arch/arm/cpu/armv7/omap-common/timer.c | 9 | ||||
| -rw-r--r-- | arch/arm/cpu/armv7/omap4/board.c | 11 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-omap3/cpu.h | 3 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-omap3/i2c.h | 4 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-omap4/cpu.h | 3 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-omap4/mux_omap4.h | 344 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-omap4/omap4.h | 2 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-omap4/sys_proto.h | 1 | ||||
| -rw-r--r-- | board/ti/panda/panda.c | 26 | ||||
| -rw-r--r-- | board/ti/panda/panda.h | 265 | ||||
| -rw-r--r-- | board/ti/sdp4430/sdp.c | 26 | ||||
| -rw-r--r-- | board/ti/sdp4430/sdp.h | 265 | ||||
| -rw-r--r-- | drivers/i2c/omap24xx_i2c.c | 31 | ||||
| -rw-r--r-- | drivers/i2c/omap24xx_i2c.h | 4 | ||||
| -rw-r--r-- | drivers/power/Makefile | 1 | ||||
| -rw-r--r-- | drivers/power/twl6030.c | 78 | ||||
| -rw-r--r-- | drivers/usb/musb/omap3.c | 16 | ||||
| -rw-r--r-- | drivers/usb/musb/omap3.h | 3 | ||||
| -rw-r--r-- | include/configs/omap4_panda.h | 26 | ||||
| -rw-r--r-- | include/configs/omap4_sdp4430.h | 26 | ||||
| -rw-r--r-- | include/twl6030.h | 91 |
21 files changed, 1210 insertions, 25 deletions
diff --git a/arch/arm/cpu/armv7/omap-common/timer.c b/arch/arm/cpu/armv7/omap-common/timer.c index 69e285f..6b8cf7b 100644 --- a/arch/arm/cpu/armv7/omap-common/timer.c +++ b/arch/arm/cpu/armv7/omap-common/timer.c @@ -41,12 +41,8 @@ static struct gptimer *timer_base = (struct gptimer *)CONFIG_SYS_TIMERBASE; /* * Nothing really to do with interrupts, just starts up a counter. - * We run the counter with 13MHz, divided by 8, resulting in timer - * frequency of 1.625MHz. With 32bit counter register, counter - * overflows in ~44min */ -/* 13MHz / 8 = 1.625MHz */ #define TIMER_CLOCK (V_SCLK / (2 << CONFIG_SYS_PTV)) #define TIMER_LOAD_VAL 0xffffffff @@ -84,11 +80,6 @@ void set_timer(ulong t) /* delay x useconds */ void __udelay(unsigned long usec) { -#if defined(CONFIG_OMAP44XX) - /* TODO temporary hack until OMAP4 clock setup routines are present */ - if (usec > 1000) - usec = usec/1000; -#endif long tmo = usec * (TIMER_CLOCK / 1000) / 1000; unsigned long now, last = readl(&timer_base->tcrr); diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c index 5bf7173..2e80d1f 100644 --- a/arch/arm/cpu/armv7/omap4/board.c +++ b/arch/arm/cpu/armv7/omap4/board.c @@ -88,3 +88,14 @@ int checkboard(void) return 0; } +/* +* This function is called by start_armboot. You can reliably use static +* data. Any boot-time function that require static data should be +* called from here +*/ +int arch_cpu_init(void) +{ + set_muxconf_regs(); + return 0; +} + diff --git a/arch/arm/include/asm/arch-omap3/cpu.h b/arch/arm/include/asm/arch-omap3/cpu.h index c072c27..390b007 100644 --- a/arch/arm/include/asm/arch-omap3/cpu.h +++ b/arch/arm/include/asm/arch-omap3/cpu.h @@ -483,4 +483,7 @@ struct pm { #define I2C_BASE2 (OMAP34XX_CORE_L4_IO_BASE + 0x72000) #define I2C_BASE3 (OMAP34XX_CORE_L4_IO_BASE + 0x60000) +/* MUSB base */ +#define MUSB_BASE (OMAP34XX_CORE_L4_IO_BASE + 0xAB000) + #endif /* _CPU_H */ diff --git a/arch/arm/include/asm/arch-omap3/i2c.h b/arch/arm/include/asm/arch-omap3/i2c.h index 7a4a73a..d2e7488 100644 --- a/arch/arm/include/asm/arch-omap3/i2c.h +++ b/arch/arm/include/asm/arch-omap3/i2c.h @@ -34,7 +34,9 @@ struct i2c { unsigned short stat; /* 0x08 */ unsigned short res3; unsigned short iv; /* 0x0C */ - unsigned short res4[3]; + unsigned short res4; + unsigned short syss; /* 0x10 */ + unsigned short res4a; unsigned short buf; /* 0x14 */ unsigned short res5; unsigned short cnt; /* 0x18 */ diff --git a/arch/arm/include/asm/arch-omap4/cpu.h b/arch/arm/include/asm/arch-omap4/cpu.h index c056b95..7d5748a 100644 --- a/arch/arm/include/asm/arch-omap4/cpu.h +++ b/arch/arm/include/asm/arch-omap4/cpu.h @@ -139,4 +139,7 @@ struct watchdog { #define I2C_BASE2 (OMAP44XX_L4_PER_BASE + 0x72000) #define I2C_BASE3 (OMAP44XX_L4_PER_BASE + 0x60000) +/* MUSB base */ +#define MUSB_BASE (OMAP44XX_L4_CORE_BASE + 0xAB000) + #endif /* _CPU_H */ diff --git a/arch/arm/include/asm/arch-omap4/mux_omap4.h b/arch/arm/include/asm/arch-omap4/mux_omap4.h new file mode 100644 index 0000000..019574b --- /dev/null +++ b/arch/arm/include/asm/arch-omap4/mux_omap4.h @@ -0,0 +1,344 @@ +/* + * (C) Copyright 2004-2009 + * Texas Instruments Incorporated + * Richard Woodruff <r-woodruff2@ti.com> + * Aneesh V <aneesh@ti.com> + * Balaji Krishnamoorthy <balajitk@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _MUX_OMAP4_H_ +#define _MUX_OMAP4_H_ + +#include <asm/types.h> + +struct pad_conf_entry { + + u16 offset; + + u16 val; + +} __attribute__ ((packed)); + +#ifdef CONFIG_OFF_PADCONF +#define OFF_PD (1 << 12) +#define OFF_PU (3 << 12) +#define OFF_OUT_PTD (0 << 10) +#define OFF_OUT_PTU (2 << 10) +#define OFF_IN (1 << 10) +#define OFF_OUT (0 << 10) +#define OFF_EN (1 << 9) +#else +#define OFF_PD (0 << 12) +#define OFF_PU (0 << 12) +#define OFF_OUT_PTD (0 << 10) +#define OFF_OUT_PTU (0 << 10) +#define OFF_IN (0 << 10) +#define OFF_OUT (0 << 10) +#define OFF_EN (0 << 9) +#endif + +#define IEN (1 << 8) +#define IDIS (0 << 8) +#define PTU (3 << 3) +#define PTD (1 << 3) +#define EN (1 << 3) +#define DIS (0 << 3) + +#define M0 0 +#define M1 1 +#define M2 2 +#define M3 3 +#define M4 4 +#define M5 5 +#define M6 6 +#define M7 7 + +#define SAFE_MODE M7 + +#ifdef CONFIG_OFF_PADCONF +#define OFF_IN_PD (OFF_PD | OFF_IN | OFF_EN) +#define OFF_IN_PU (OFF_PU | OFF_IN | OFF_EN) +#define OFF_OUT_PD (OFF_OUT_PTD | OFF_OUT | OFF_EN) +#define OFF_OUT_PU (OFF_OUT_PTU | OFF_OUT | OFF_EN) +#else +#define OFF_IN_PD 0 +#define OFF_IN_PU 0 +#define OFF_OUT_PD 0 +#define OFF_OUT_PU 0 +#endif + +#define CORE_REVISION 0x0000 +#define CORE_HWINFO 0x0004 +#define CORE_SYSCONFIG 0x0010 +#define GPMC_AD0 0x0040 +#define GPMC_AD1 0x0042 +#define GPMC_AD2 0x0044 +#define GPMC_AD3 0x0046 +#define GPMC_AD4 0x0048 +#define GPMC_AD5 0x004A +#define GPMC_AD6 0x004C +#define GPMC_AD7 0x004E +#define GPMC_AD8 0x0050 +#define GPMC_AD9 0x0052 +#define GPMC_AD10 0x0054 +#define GPMC_AD11 0x0056 +#define GPMC_AD12 0x0058 +#define GPMC_AD13 0x005A +#define GPMC_AD14 0x005C +#define GPMC_AD15 0x005E +#define GPMC_A16 0x0060 +#define GPMC_A17 0x0062 +#define GPMC_A18 0x0064 +#define GPMC_A19 0x0066 +#define GPMC_A20 0x0068 +#define GPMC_A21 0x006A +#define GPMC_A22 0x006C +#define GPMC_A23 0x006E +#define GPMC_A24 0x0070 +#define GPMC_A25 0x0072 +#define GPMC_NCS0 0x0074 +#define GPMC_NCS1 0x0076 +#define GPMC_NCS2 0x0078 +#define GPMC_NCS3 0x007A +#define GPMC_NWP 0x007C +#define GPMC_CLK 0x007E +#define GPMC_NADV_ALE 0x0080 +#define GPMC_NOE 0x0082 +#define GPMC_NWE 0x0084 +#define GPMC_NBE0_CLE 0x0086 +#define GPMC_NBE1 0x0088 +#define GPMC_WAIT0 0x008A +#define GPMC_WAIT1 0x008C +#define C2C_DATA11 0x008E +#define C2C_DATA12 0x0090 +#define C2C_DATA13 0x0092 +#define C2C_DATA14 0x0094 +#define C2C_DATA15 0x0096 +#define HDMI_HPD 0x0098 +#define HDMI_CEC 0x009A +#define HDMI_DDC_SCL 0x009C +#define HDMI_DDC_SDA 0x009E +#define CSI21_DX0 0x00A0 +#define CSI21_DY0 0x00A2 +#define CSI21_DX1 0x00A4 +#define CSI21_DY1 0x00A6 +#define CSI21_DX2 0x00A8 +#define CSI21_DY2 0x00AA +#define CSI21_DX3 0x00AC +#define CSI21_DY3 0x00AE +#define CSI21_DX4 0x00B0 +#define CSI21_DY4 0x00B2 +#define CSI22_DX0 0x00B4 +#define CSI22_DY0 0x00B6 +#define CSI22_DX1 0x00B8 +#define CSI22_DY1 0x00BA +#define CAM_SHUTTER 0x00BC +#define CAM_STROBE 0x00BE +#define CAM_GLOBALRESET 0x00C0 +#define USBB1_ULPITLL_CLK 0x00C2 +#define USBB1_ULPITLL_STP 0x00C4 +#define USBB1_ULPITLL_DIR 0x00C6 +#define USBB1_ULPITLL_NXT 0x00C8 +#define USBB1_ULPITLL_DAT0 0x00CA +#define USBB1_ULPITLL_DAT1 0x00CC +#define USBB1_ULPITLL_DAT2 0x00CE +#define USBB1_ULPITLL_DAT3 0x00D0 +#define USBB1_ULPITLL_DAT4 0x00D2 +#define USBB1_ULPITLL_DAT5 0x00D4 +#define USBB1_ULPITLL_DAT6 0x00D6 +#define USBB1_ULPITLL_DAT7 0x00D8 +#define USBB1_HSIC_DATA 0x00DA +#define USBB1_HSIC_STROBE 0x00DC +#define USBC1_ICUSB_DP 0x00DE +#define USBC1_ICUSB_DM 0x00E0 +#define SDMMC1_CLK 0x00E2 +#define SDMMC1_CMD 0x00E4 +#define SDMMC1_DAT0 0x00E6 +#define SDMMC1_DAT1 0x00E8 +#define SDMMC1_DAT2 0x00EA +#define SDMMC1_DAT3 0x00EC +#define SDMMC1_DAT4 0x00EE +#define SDMMC1_DAT5 0x00F0 +#define SDMMC1_DAT6 0x00F2 +#define SDMMC1_DAT7 0x00F4 +#define ABE_MCBSP2_CLKX 0x00F6 +#define ABE_MCBSP2_DR 0x00F8 +#define ABE_MCBSP2_DX 0x00FA +#define ABE_MCBSP2_FSX 0x00FC +#define ABE_MCBSP1_CLKX 0x00FE +#define ABE_MCBSP1_DR 0x0100 +#define ABE_MCBSP1_DX 0x0102 +#define ABE_MCBSP1_FSX 0x0104 +#define ABE_PDM_UL_DATA 0x0106 +#define ABE_PDM_DL_DATA 0x0108 +#define ABE_PDM_FRAME 0x010A +#define ABE_PDM_LB_CLK 0x010C +#define ABE_CLKS 0x010E +#define ABE_DMIC_CLK1 0x0110 +#define ABE_DMIC_DIN1 0x0112 +#define ABE_DMIC_DIN2 0x0114 +#define ABE_DMIC_DIN3 0x0116 +#define UART2_CTS 0x0118 +#define UART2_RTS 0x011A +#define UART2_RX 0x011C +#define UART2_TX 0x011E +#define HDQ_SIO 0x0120 +#define I2C1_SCL 0x0122 +#define I2C1_SDA 0x0124 +#define I2C2_SCL 0x0126 +#define I2C2_SDA 0x0128 +#define I2C3_SCL 0x012A +#define I2C3_SDA 0x012C +#define I2C4_SCL 0x012E +#define I2C4_SDA 0x0130 +#define MCSPI1_CLK 0x0132 +#define MCSPI1_SOMI 0x0134 +#define MCSPI1_SIMO 0x0136 +#define MCSPI1_CS0 0x0138 +#define MCSPI1_CS1 0x013A +#define MCSPI1_CS2 0x013C +#define MCSPI1_CS3 0x013E +#define UART3_CTS_RCTX 0x0140 +#define UART3_RTS_SD 0x0142 +#define UART3_RX_IRRX 0x0144 +#define UART3_TX_IRTX 0x0146 +#define SDMMC5_CLK 0x0148 +#define SDMMC5_CMD 0x014A +#define SDMMC5_DAT0 0x014C +#define SDMMC5_DAT1 0x014E +#define SDMMC5_DAT2 0x0150 +#define SDMMC5_DAT3 0x0152 +#define MCSPI4_CLK 0x0154 +#define MCSPI4_SIMO 0x0156 +#define MCSPI4_SOMI 0x0158 +#define MCSPI4_CS0 0x015A +#define UART4_RX 0x015C +#define UART4_TX 0x015E +#define USBB2_ULPITLL_CLK 0x0160 +#define USBB2_ULPITLL_STP 0x0162 +#define USBB2_ULPITLL_DIR 0x0164 +#define USBB2_ULPITLL_NXT 0x0166 +#define USBB2_ULPITLL_DAT0 0x0168 +#define USBB2_ULPITLL_DAT1 0x016A +#define USBB2_ULPITLL_DAT2 0x016C +#define USBB2_ULPITLL_DAT3 0x016E +#define USBB2_ULPITLL_DAT4 0x0170 +#define USBB2_ULPITLL_DAT5 0x0172 +#define USBB2_ULPITLL_DAT6 0x0174 +#define USBB2_ULPITLL_DAT7 0x0176 +#define USBB2_HSIC_DATA 0x0178 +#define USBB2_HSIC_STROBE 0x017A +#define UNIPRO_TX0 0x017C +#define UNIPRO_TY0 0x017E +#define UNIPRO_TX1 0x0180 +#define UNIPRO_TY1 0x0182 +#define UNIPRO_TX2 0x0184 +#define UNIPRO_TY2 0x0186 +#define UNIPRO_RX0 0x0188 +#define UNIPRO_RY0 0x018A +#define UNIPRO_RX1 0x018C +#define UNIPRO_RY1 0x018E +#define UNIPRO_RX2 0x0190 +#define UNIPRO_RY2 0x0192 +#define USBA0_OTG_CE 0x0194 +#define USBA0_OTG_DP 0x0196 +#define USBA0_OTG_DM 0x0198 +#define FREF_CLK1_OUT 0x019A +#define FREF_CLK2_OUT 0x019C +#define SYS_NIRQ1 0x019E +#define SYS_NIRQ2 0x01A0 +#define SYS_BOOT0 0x01A2 +#define SYS_BOOT1 0x01A4 +#define SYS_BOOT2 0x01A6 +#define SYS_BOOT3 0x01A8 +#define SYS_BOOT4 0x01AA +#define SYS_BOOT5 0x01AC +#define DPM_EMU0 0x01AE +#define DPM_EMU1 0x01B0 +#define DPM_EMU2 0x01B2 +#define DPM_EMU3 0x01B4 +#define DPM_EMU4 0x01B6 +#define DPM_EMU5 0x01B8 +#define DPM_EMU6 0x01BA +#define DPM_EMU7 0x01BC +#define DPM_EMU8 0x01BE +#define DPM_EMU9 0x01C0 +#define DPM_EMU10 0x01C2 +#define DPM_EMU11 0x01C4 +#define DPM_EMU12 0x01C6 +#define DPM_EMU13 0x01C8 +#define DPM_EMU14 0x01CA +#define DPM_EMU15 0x01CC +#define DPM_EMU16 0x01CE +#define DPM_EMU17 0x01D0 +#define DPM_EMU18 0x01D2 +#define DPM_EMU19 0x01D4 +#define WAKEUPEVENT_0 0x01D8 +#define WAKEUPEVENT_1 0x01DC +#define WAKEUPEVENT_2 0x01E0 +#define WAKEUPEVENT_3 0x01E4 +#define WAKEUPEVENT_4 0x01E8 +#define WAKEUPEVENT_5 0x01EC +#define WAKEUPEVENT_6 0x01F0 + +#define WKUP_REVISION 0x0000 +#define WKUP_HWINFO 0x0004 +#define WKUP_SYSCONFIG 0x0010 +#define PAD0_SIM_IO 0x0040 +#define PAD1_SIM_CLK 0x0042 +#define PAD0_SIM_RESET 0x0044 +#define PAD1_SIM_CD 0x0046 +#define PAD0_SIM_PWRCTRL 0x0048 +#define PAD1_SR_SCL 0x004A +#define PAD0_SR_SDA 0x004C +#define PAD1_FREF_XTAL_IN 0x004E +#define PAD0_FREF_SLICER_IN 0x0050 +#define PAD1_FREF_CLK_IOREQ 0x0052 +#define PAD0_FREF_CLK0_OUT 0x0054 +#define PAD1_FREF_CLK3_REQ 0x0056 +#define PAD0_FREF_CLK3_OUT 0x0058 +#define PAD1_FREF_CLK4_REQ 0x005A +#define PAD0_FREF_CLK4_OUT 0x005C +#define PAD1_SYS_32K 0x005E +#define PAD0_SYS_NRESPWRON 0x0060 +#define PAD1_SYS_NRESWARM 0x0062 +#define PAD0_SYS_PWR_REQ 0x0064 +#define PAD1_SYS_PWRON_RESET 0x0066 +#define PAD0_SYS_BOOT6 0x0068 +#define PAD1_SYS_BOOT7 0x006A +#define PAD0_JTAG_NTRST 0x006C +#define PAD1_JTAG_TCK 0x006D +#define PAD0_JTAG_RTCK 0x0070 +#define PAD1_JTAG_TMS_TMSC 0x0072 +#define PAD0_JTAG_TDI 0x0074 +#define PAD1_JTAG_TDO 0x0076 +#define PADCONF_WAKEUPEVENT_0 0x007C +#define CONTROL_SMART1NOPMIO_PADCONF_0 0x05A0 +#define CONTROL_SMART1NOPMIO_PADCONF_1 0x05A4 +#define PADCONF_MODE 0x05A8 +#define CONTROL_XTAL_OSCILLATOR 0x05AC +#define CONTROL_CONTROL_I2C_2 0x0604 +#define CONTROL_CONTROL_JTAG 0x0608 +#define CONTROL_CONTROL_SYS 0x060C +#define CONTROL_SPARE_RW 0x0614 +#define CONTROL_SPARE_R 0x0618 +#define CONTROL_SPARE_R_C0 0x061C + +#endif /* _MUX_OMAP4_H_ */ diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap4.h index 5243ea8..79ff22c 100644 --- a/arch/arm/include/asm/arch-omap4/omap4.h +++ b/arch/arm/include/asm/arch-omap4/omap4.h @@ -44,6 +44,8 @@ /* CONTROL */ #define CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000) +#define CONTROL_PADCONF_CORE (OMAP44XX_L4_CORE_BASE + 0x100000) +#define CONTROL_PADCONF_WKUP (OMAP44XX_L4_CORE_BASE + 0x31E000) /* UART */ #define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000) diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h index c6fab00..ad0c640 100644 --- a/arch/arm/include/asm/arch-omap4/sys_proto.h +++ b/arch/arm/include/asm/arch-omap4/sys_proto.h @@ -32,6 +32,7 @@ void gpmc_init(void); void watchdog_init(void); u32 get_device_type(void); void invalidate_dcache(u32); +void set_muxconf_regs(void); extern const struct omap_sysinfo sysinfo; diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index 917bbec..1b8153b 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -24,6 +24,8 @@ #include <common.h> #include <asm/arch/sys_proto.h> +#include "panda.h" + DECLARE_GLOBAL_DATA_PTR; const struct omap_sysinfo sysinfo = { @@ -61,3 +63,27 @@ int misc_init_r(void) { return 0; } + +void do_set_mux(u32 base, struct pad_conf_entry const *array, int size) +{ + int i; + struct pad_conf_entry *pad = (struct pad_conf_entry *) array; + + for (i = 0; i < size; i++, pad++) + writew(pad->val, base + pad->offset); +} + +/** + * @brief set_muxconf_regs Setting up the configuration Mux registers + * specific to the board. + */ +void set_muxconf_regs(void) +{ + do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array, + sizeof(core_padconf_array) / + sizeof(struct pad_conf_entry)); + + do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array, + sizeof(wkup_padconf_array) / + sizeof(struct pad_conf_entry)); +} diff --git a/board/ti/panda/panda.h b/board/ti/panda/panda.h new file mode 100644 index 0000000..8f6a6b1 --- /dev/null +++ b/board/ti/panda/panda.h @@ -0,0 +1,265 @@ +/* + * (C) Copyright 2010 + * Texas Instruments Incorporated, <www.ti.com> + * + * Balaji Krishnamoorthy <balajitk@ti.com> + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _PANDA_H_ +#define _PANDA_H_ + +#include <asm/io.h> +#include <asm/arch/mux_omap4.h> + +const struct pad_conf_entry core_padconf_array[] = { + {GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */ + {GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */ + {GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */ + {GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */ + {GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */ + {GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */ + {GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */ + {GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */ + {GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */ + {GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */ + {GPMC_AD10, (PTU | IEN | M3)}, /* gpio_34 */ + {GPMC_AD11, (PTU | IEN | M3)}, /* gpio_35 */ + {GPMC_AD12, (PTU | IEN | M3)}, /* gpio_36 */ + {GPMC_AD13, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_37 */ + {GPMC_AD14, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_38 */ + {GPMC_AD15, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_39 */ + {GPMC_A16, (M3)}, /* gpio_40 */ + {GPMC_A17, (PTD | M3)}, /* gpio_41 */ + {GPMC_A18, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row6 */ + {GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */ + {GPMC_A20, (IEN | M3)}, /* gpio_44 */ + {GPMC_A21, (M3)}, /* gpio_45 */ + {GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col6 */ + {GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */ + {GPMC_A24, (PTD | M3)}, /* gpio_48 */ + {GPMC_A25, (PTD | M3)}, /* gpio_49 */ + {GPMC_NCS0, (M3)}, /* gpio_50 */ + {GPMC_NCS1, (IEN | M3)}, /* gpio_51 */ + {GPMC_NCS2, (IEN | M3)}, /* gpio_52 */ + {GPMC_NCS3, (IEN | M3)}, /* gpio_53 */ + {GPMC_NWP, (M3)}, /* gpio_54 */ + {GPMC_CLK, (PTD | M3)}, /* gpio_55 */ + {GPMC_NADV_ALE, (M3)}, /* gpio_56 */ + {GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */ + {GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */ + {GPMC_NBE0_CLE, (M3)}, /* gpio_59 */ + {GPMC_NBE1, (PTD | M3)}, /* gpio_60 */ + {GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */ + {GPMC_WAIT1, (IEN | M3)}, /* gpio_62 */ + {C2C_DATA11, (PTD | M3)}, /* gpio_100 */ + {C2C_DATA12, (M1)}, /* dsi1_te0 */ + {C2C_DATA13, (PTD | M3)}, /* gpio_102 */ + {C2C_DATA14, (M1)}, /* dsi2_te0 */ + {C2C_DATA15, (PTD | M3)}, /* gpio_104 */ + {HDMI_HPD, (M0)}, /* hdmi_hpd */ + {HDMI_CEC, (M0)}, /* hdmi_cec */ + {HDMI_DDC_SCL, (PTU | M0)}, /* hdmi_ddc_scl */ + {HDMI_DDC_SDA, (PTU | IEN | M0)}, /* hdmi_ddc_sda */ + {CSI21_DX0, (IEN | M0)}, /* csi21_dx0 */ + {CSI21_DY0, (IEN | M0)}, /* csi21_dy0 */ + {CSI21_DX1, (IEN | M0)}, /* csi21_dx1 */ + {CSI21_DY1, (IEN | M0)}, /* csi21_dy1 */ + {CSI21_DX2, (IEN | M0)}, /* csi21_dx2 */ + {CSI21_DY2, (IEN | M0)}, /* csi21_dy2 */ + {CSI21_DX3, (PTD | M7)}, /* csi21_dx3 */ + {CSI21_DY3, (PTD | M7)}, /* csi21_dy3 */ + {CSI21_DX4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dx4 */ + {CSI21_DY4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dy4 */ + {CSI22_DX0, (IEN | M0)}, /* csi22_dx0 */ + {CSI22_DY0, (IEN | M0)}, /* csi22_dy0 */ + {CSI22_DX1, (IEN | M0)}, /* csi22_dx1 */ + {CSI22_DY1, (IEN | M0)}, /* csi22_dy1 */ + {CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */ + {CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */ + {CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */ + {USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */ + {USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */ + {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */ + {USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */ + {USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */ + {USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */ + {USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */ + {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */ + {USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */ + {USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */ + {USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */ + {USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */ + {USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */ + {USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */ + {USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */ + {USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */ + {SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */ + {SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */ + {SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */ + {SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */ + {SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */ + {SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */ + {SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */ + {SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */ + {SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */ + {SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */ + {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */ + {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */ + {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */ + {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */ + {ABE_MCBSP1_CLKX, (IEN | M1)}, /* abe_slimbus1_clock */ + {ABE_MCBSP1_DR, (IEN | M1)}, /* abe_slimbus1_data */ + {ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dx */ + {ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_fsx */ + {ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */ + {ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_dl_data */ + {ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_frame */ + {ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_lb_clk */ + {ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_clks */ + {ABE_DMIC_CLK1, (M0)}, /* abe_dmic_clk1 */ + {ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */ + {ABE_DMIC_DIN2, (IEN | M0)}, /* abe_dmic_din2 */ + {ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */ + {UART2_CTS, (PTU | IEN | M0)}, /* uart2_cts */ + {UART2_RTS, (M0)}, /* uart2_rts */ + {UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */ + {UART2_TX, (M0)}, /* uart2_tx */ + {HDQ_SIO, (M3)}, /* gpio_127 */ + {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ + {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ + {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ + {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ + {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ + {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ + {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ + {I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */ + {MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */ + {MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */ + {MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */ + {MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs0 */ + {MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* mcspi1_cs1 */ + {MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_139 */ + {MCSPI1_CS3, (PTU | IEN | M3)}, /* gpio_140 */ + {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ + {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ + {UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */ + {UART3_TX_IRTX, (M0)}, /* uart3_tx */ + {SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc5_clk */ + {SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */ + {SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */ + {SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat1 */ + {SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat2 */ + {SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat3 */ + {MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_clk */ + {MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_simo */ + {MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_somi */ + {MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */ + {UART4_RX, (IEN | M0)}, /* uart4_rx */ + {UART4_TX, (M0)}, /* uart4_tx */ + {USBB2_ULPITLL_CLK, (IEN | M3)}, /* gpio_157 */ + {USBB2_ULPITLL_STP, (IEN | M5)}, /* dispc2_data23 */ + {USBB2_ULPITLL_DIR, (IEN | M5)}, /* dispc2_data22 */ + {USBB2_ULPITLL_NXT, (IEN | M5)}, /* dispc2_data21 */ + {USBB2_ULPITLL_DAT0, (IEN | M5)}, /* dispc2_data20 */ + {USBB2_ULPITLL_DAT1, (IEN | M5)}, /* dispc2_data19 */ + {USBB2_ULPITLL_DAT2, (IEN | M5)}, /* dispc2_data18 */ + {USBB2_ULPITLL_DAT3, (IEN | M5)}, /* dispc2_data15 */ + {USBB2_ULPITLL_DAT4, (IEN | M5)}, /* dispc2_data14 */ + {USBB2_ULPITLL_DAT5, (IEN | M5)}, /* dispc2_data13 */ + {USBB2_ULPITLL_DAT6, (IEN | M5)}, /* dispc2_data12 */ + {USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */ + {USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */ + {USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */ + {UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col0 */ + {UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */ + {UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */ + {UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */ + {UNIPRO_TX2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_0 */ + {UNIPRO_TY2, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_1 */ + {UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */ + {UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */ + {UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */ + {UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row3 */ + {UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row4 */ + {UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row5 */ + {USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */ + {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */ + {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */ + {FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */ + {FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */ + {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */ + {SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */ + {SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */ + {SYS_BOOT1, (M3)}, /* gpio_185 */ + {SYS_BOOT2, (PTD | IEN | M3)}, /* gpio_186 */ + {SYS_BOOT3, (M3)}, /* gpio_187 */ + {SYS_BOOT4, (M3)}, /* gpio_188 */ + {SYS_BOOT5, (PTD | IEN | M3)}, /* gpio_189 */ + {DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */ + {DPM_EMU1, (IEN | M0)}, /* dpm_emu1 */ + {DPM_EMU2, (IEN | M0)}, /* dpm_emu2 */ + {DPM_EMU3, (IEN | M5)}, /* dispc2_data10 */ + {DPM_EMU4, (IEN | M5)}, /* dispc2_data9 */ + {DPM_EMU5, (IEN | M5)}, /* dispc2_data16 */ + {DPM_EMU6, (IEN | M5)}, /* dispc2_data17 */ + {DPM_EMU7, (IEN | M5)}, /* dispc2_hsync */ + {DPM_EMU8, (IEN | M5)}, /* dispc2_pclk */ + {DPM_EMU9, (IEN | M5)}, /* dispc2_vsync */ + {DPM_EMU10, (IEN | M5)}, /* dispc2_de */ + {DPM_EMU11, (IEN | M5)}, /* dispc2_data8 */ + {DPM_EMU12, (IEN | M5)}, /* dispc2_data7 */ + {DPM_EMU13, (IEN | M5)}, /* dispc2_data6 */ + {DPM_EMU14, (IEN | M5)}, /* dispc2_data5 */ + {DPM_EMU15, (IEN | M5)}, /* dispc2_data4 */ + {DPM_EMU16, (IEN | M5)}, /* dispc2_data3 */ + {DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */ + {DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */ + {DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */ +}; + +const struct pad_conf_entry wkup_padconf_array[] = { + {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */ + {PAD1_SIM_CLK, (M0)}, /* sim_clk */ + {PAD0_SIM_RESET, (M0)}, /* sim_reset */ + {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */ + {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */ + {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ + {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ + {PAD1_FREF_XTAL_IN, (M0)}, /* # */ + {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */ + {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */ + {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */ + {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */ + {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ + {PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)}, /* # */ + {PAD0_FREF_CLK4_OUT, (M0)}, /* # */ + {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */ + {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */ + {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */ + {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */ + {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */ + {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */ + {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */ +}; + +#endif + diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c index 8ed7873..7039bd5 100644 --- a/board/ti/sdp4430/sdp.c +++ b/board/ti/sdp4430/sdp.c @@ -25,6 +25,8 @@ #include <common.h> #include <asm/arch/sys_proto.h> +#include "sdp.h" + DECLARE_GLOBAL_DATA_PTR; const struct omap_sysinfo sysinfo = { @@ -62,3 +64,27 @@ int misc_init_r(void) { return 0; } + +void do_set_mux(u32 base, struct pad_conf_entry const *array, int size) +{ + int i; + struct pad_conf_entry *pad = (struct pad_conf_entry *) array; + + for (i = 0; i < size; i++, pad++) + writew(pad->val, base + pad->offset); +} + +/** + * @brief set_muxconf_regs Setting up the configuration Mux registers + * specific to the board. + */ +void set_muxconf_regs(void) +{ + do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array, + sizeof(core_padconf_array) / + sizeof(struct pad_conf_entry)); + + do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array, + sizeof(wkup_padconf_array) / + sizeof(struct pad_conf_entry)); +} diff --git a/board/ti/sdp4430/sdp.h b/board/ti/sdp4430/sdp.h new file mode 100644 index 0000000..803e3d3 --- /dev/null +++ b/board/ti/sdp4430/sdp.h @@ -0,0 +1,265 @@ +/* + * (C) Copyright 2010 + * Texas Instruments Incorporated, <www.ti.com> + * + * Balaji Krishnamoorthy <balajitk@ti.com> + * Aneesh V <aneesh@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SDP_H_ +#define _SDP_H_ + +#include <asm/io.h> +#include <asm/arch/mux_omap4.h> + +const struct pad_conf_entry core_padconf_array[] = { + {GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */ + {GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */ + {GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */ + {GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */ + {GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */ + {GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */ + {GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */ + {GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */ + {GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */ + {GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */ + {GPMC_AD10, (PTU | IEN | M3)}, /* gpio_34 */ + {GPMC_AD11, (PTU | IEN | M3)}, /* gpio_35 */ + {GPMC_AD12, (PTU | IEN | M3)}, /* gpio_36 */ + {GPMC_AD13, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_37 */ + {GPMC_AD14, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_38 */ + {GPMC_AD15, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_39 */ + {GPMC_A16, (M3)}, /* gpio_40 */ + {GPMC_A17, (PTD | M3)}, /* gpio_41 */ + {GPMC_A18, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row6 */ + {GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */ + {GPMC_A20, (IEN | M3)}, /* gpio_44 */ + {GPMC_A21, (M3)}, /* gpio_45 */ + {GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col6 */ + {GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */ + {GPMC_A24, (PTD | M3)}, /* gpio_48 */ + {GPMC_A25, (PTD | M3)}, /* gpio_49 */ + {GPMC_NCS0, (M3)}, /* gpio_50 */ + {GPMC_NCS1, (IEN | M3)}, /* gpio_51 */ + {GPMC_NCS2, (IEN | M3)}, /* gpio_52 */ + {GPMC_NCS3, (IEN | M3)}, /* gpio_53 */ + {GPMC_NWP, (M3)}, /* gpio_54 */ + {GPMC_CLK, (PTD | M3)}, /* gpio_55 */ + {GPMC_NADV_ALE, (M3)}, /* gpio_56 */ + {GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */ + {GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */ + {GPMC_NBE0_CLE, (M3)}, /* gpio_59 */ + {GPMC_NBE1, (PTD | M3)}, /* gpio_60 */ + {GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */ + {GPMC_WAIT1, (IEN | M3)}, /* gpio_62 */ + {C2C_DATA11, (PTD | M3)}, /* gpio_100 */ + {C2C_DATA12, (M1)}, /* dsi1_te0 */ + {C2C_DATA13, (PTD | M3)}, /* gpio_102 */ + {C2C_DATA14, (M1)}, /* dsi2_te0 */ + {C2C_DATA15, (PTD | M3)}, /* gpio_104 */ + {HDMI_HPD, (M0)}, /* hdmi_hpd */ + {HDMI_CEC, (M0)}, /* hdmi_cec */ + {HDMI_DDC_SCL, (PTU | M0)}, /* hdmi_ddc_scl */ + {HDMI_DDC_SDA, (PTU | IEN | M0)}, /* hdmi_ddc_sda */ + {CSI21_DX0, (IEN | M0)}, /* csi21_dx0 */ + {CSI21_DY0, (IEN | M0)}, /* csi21_dy0 */ + {CSI21_DX1, (IEN | M0)}, /* csi21_dx1 */ + {CSI21_DY1, (IEN | M0)}, /* csi21_dy1 */ + {CSI21_DX2, (IEN | M0)}, /* csi21_dx2 */ + {CSI21_DY2, (IEN | M0)}, /* csi21_dy2 */ + {CSI21_DX3, (PTD | M7)}, /* csi21_dx3 */ + {CSI21_DY3, (PTD | M7)}, /* csi21_dy3 */ + {CSI21_DX4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dx4 */ + {CSI21_DY4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dy4 */ + {CSI22_DX0, (IEN | M0)}, /* csi22_dx0 */ + {CSI22_DY0, (IEN | M0)}, /* csi22_dy0 */ + {CSI22_DX1, (IEN | M0)}, /* csi22_dx1 */ + {CSI22_DY1, (IEN | M0)}, /* csi22_dy1 */ + {CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */ + {CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */ + {CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */ + {USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */ + {USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */ + {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */ + {USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */ + {USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */ + {USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */ + {USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */ + {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */ + {USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */ + {USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */ + {USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */ + {USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */ + {USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */ + {USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */ + {USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */ + {USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */ + {SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */ + {SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */ + {SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */ + {SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */ + {SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */ + {SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */ + {SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */ + {SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */ + {SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */ + {SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */ + {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */ + {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */ + {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */ + {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */ + {ABE_MCBSP1_CLKX, (IEN | M1)}, /* abe_slimbus1_clock */ + {ABE_MCBSP1_DR, (IEN | M1)}, /* abe_slimbus1_data */ + {ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dx */ + {ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_fsx */ + {ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */ + {ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_dl_data */ + {ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_frame */ + {ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_lb_clk */ + {ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_clks */ + {ABE_DMIC_CLK1, (M0)}, /* abe_dmic_clk1 */ + {ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */ + {ABE_DMIC_DIN2, (IEN | M0)}, /* abe_dmic_din2 */ + {ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */ + {UART2_CTS, (PTU | IEN | M0)}, /* uart2_cts */ + {UART2_RTS, (M0)}, /* uart2_rts */ + {UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */ + {UART2_TX, (M0)}, /* uart2_tx */ + {HDQ_SIO, (M3)}, /* gpio_127 */ + {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ + {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ + {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ + {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ + {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ + {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ + {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ + {I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */ + {MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */ + {MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */ + {MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */ + {MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs0 */ + {MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* mcspi1_cs1 */ + {MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_139 */ + {MCSPI1_CS3, (PTU | IEN | M3)}, /* gpio_140 */ + {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ + {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ + {UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */ + {UART3_TX_IRTX, (M0)}, /* uart3_tx */ + {SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc5_clk */ + {SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */ + {SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */ + {SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat1 */ + {SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat2 */ + {SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat3 */ + {MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_clk */ + {MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_simo */ + {MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_somi */ + {MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */ + {UART4_RX, (IEN | M0)}, /* uart4_rx */ + {UART4_TX, (M0)}, /* uart4_tx */ + {USBB2_ULPITLL_CLK, (IEN | M3)}, /* gpio_157 */ + {USBB2_ULPITLL_STP, (IEN | M5)}, /* dispc2_data23 */ + {USBB2_ULPITLL_DIR, (IEN | M5)}, /* dispc2_data22 */ + {USBB2_ULPITLL_NXT, (IEN | M5)}, /* dispc2_data21 */ + {USBB2_ULPITLL_DAT0, (IEN | M5)}, /* dispc2_data20 */ + {USBB2_ULPITLL_DAT1, (IEN | M5)}, /* dispc2_data19 */ + {USBB2_ULPITLL_DAT2, (IEN | M5)}, /* dispc2_data18 */ + {USBB2_ULPITLL_DAT3, (IEN | M5)}, /* dispc2_data15 */ + {USBB2_ULPITLL_DAT4, (IEN | M5)}, /* dispc2_data14 */ + {USBB2_ULPITLL_DAT5, (IEN | M5)}, /* dispc2_data13 */ + {USBB2_ULPITLL_DAT6, (IEN | M5)}, /* dispc2_data12 */ + {USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */ + {USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */ + {USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */ + {UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col0 */ + {UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */ + {UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */ + {UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */ + {UNIPRO_TX2, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col4 */ + {UNIPRO_TY2, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col5 */ + {UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */ + {UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */ + {UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */ + {UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row3 */ + {UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row4 */ + {UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row5 */ + {USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */ + {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */ + {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */ + {FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */ + {FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */ + {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */ + {SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */ + {SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */ + {SYS_BOOT1, (M3)}, /* gpio_185 */ + {SYS_BOOT2, (PTD | IEN | M3)}, /* gpio_186 */ + {SYS_BOOT3, (M3)}, /* gpio_187 */ + {SYS_BOOT4, (M3)}, /* gpio_188 */ + {SYS_BOOT5, (PTD | IEN | M3)}, /* gpio_189 */ + {DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */ + {DPM_EMU1, (IEN | M0)}, /* dpm_emu1 */ + {DPM_EMU2, (IEN | M0)}, /* dpm_emu2 */ + {DPM_EMU3, (IEN | M5)}, /* dispc2_data10 */ + {DPM_EMU4, (IEN | M5)}, /* dispc2_data9 */ + {DPM_EMU5, (IEN | M5)}, /* dispc2_data16 */ + {DPM_EMU6, (IEN | M5)}, /* dispc2_data17 */ + {DPM_EMU7, (IEN | M5)}, /* dispc2_hsync */ + {DPM_EMU8, (IEN | M5)}, /* dispc2_pclk */ + {DPM_EMU9, (IEN | M5)}, /* dispc2_vsync */ + {DPM_EMU10, (IEN | M5)}, /* dispc2_de */ + {DPM_EMU11, (IEN | M5)}, /* dispc2_data8 */ + {DPM_EMU12, (IEN | M5)}, /* dispc2_data7 */ + {DPM_EMU13, (IEN | M5)}, /* dispc2_data6 */ + {DPM_EMU14, (IEN | M5)}, /* dispc2_data5 */ + {DPM_EMU15, (IEN | M5)}, /* dispc2_data4 */ + {DPM_EMU16, (M3)}, /* gpio_27 */ + {DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */ + {DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */ + {DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */ +}; + +const struct pad_conf_entry wkup_padconf_array[] = { + {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */ + {PAD1_SIM_CLK, (M0)}, /* sim_clk */ + {PAD0_SIM_RESET, (M0)}, /* sim_reset */ + {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */ + {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */ + {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */ + {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */ + {PAD1_FREF_XTAL_IN, (M0)}, /* # */ + {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */ + {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */ + {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */ + {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */ + {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */ + {PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)}, /* # */ + {PAD0_FREF_CLK4_OUT, (M0)}, /* # */ + {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */ + {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */ + {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */ + {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */ + {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */ + {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */ + {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */ +}; + +#endif + diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index 3256133..7c98f15 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -27,6 +27,8 @@ #include "omap24xx_i2c.h" +#define I2C_TIMEOUT 10 + static void wait_for_bb (void); static u16 wait_for_pin (void); static void flush_fifo(void); @@ -41,6 +43,7 @@ void i2c_init (int speed, int slaveadd) int psc, fsscll, fssclh; int hsscll = 0, hssclh = 0; u32 scll, sclh; + int timeout = I2C_TIMEOUT; /* Only handle standard, fast and high speeds */ if ((speed != OMAP_I2C_STANDARD) && @@ -102,15 +105,24 @@ void i2c_init (int speed, int slaveadd) sclh = (unsigned int)fssclh; } - writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */ - udelay(1000); - writew(0x0, &i2c_base->sysc); /* will probably self clear but */ - if (readw (&i2c_base->con) & I2C_CON_EN) { writew (0, &i2c_base->con); udelay (50000); } + writew(0x2, &i2c_base->sysc); /* for ES2 after soft reset */ + udelay(1000); + + writew(I2C_CON_EN, &i2c_base->con); + while (!(readw(&i2c_base->syss) & I2C_SYSS_RDONE) && timeout--) { + if (timeout <= 0) { + printf("ERROR: Timeout in soft-reset\n"); + return; + } + udelay(1000); + } + + writew(0, &i2c_base->con); writew(psc, &i2c_base->psc); writew(scll, &i2c_base->scll); writew(sclh, &i2c_base->sclh); @@ -159,15 +171,14 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value) } if (!i2c_error) { - /* free bus, otherwise we can't use a combined transction */ - writew (0, &i2c_base->con); - while (readw (&i2c_base->stat) || (readw (&i2c_base->con) & I2C_CON_MST)) { + writew (I2C_CON_EN, &i2c_base->con); + while (readw(&i2c_base->stat) & + (I2C_STAT_XRDY | I2C_STAT_ARDY)) { udelay (10000); /* Have to clear pending interrupt to clear I2C_STAT */ writew (0xFFFF, &i2c_base->stat); } - wait_for_bb (); /* set slave address */ writew (devaddr, &i2c_base->sa); /* read one byte from slave */ @@ -191,8 +202,8 @@ static int i2c_read_byte (u8 devaddr, u8 regoffset, u8 * value) if (!i2c_error) { writew (I2C_CON_EN, &i2c_base->con); - while (readw (&i2c_base->stat) - || (readw (&i2c_base->con) & I2C_CON_MST)) { + while (readw (&i2c_base->stat) & + (I2C_STAT_RRDY | I2C_STAT_ARDY)) { udelay (10000); writew (0xFFFF, &i2c_base->stat); } diff --git a/drivers/i2c/omap24xx_i2c.h b/drivers/i2c/omap24xx_i2c.h index 92a3416..650e33a 100644 --- a/drivers/i2c/omap24xx_i2c.h +++ b/drivers/i2c/omap24xx_i2c.h @@ -85,6 +85,10 @@ #define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */ #define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */ +/* I2C System Status Register (I2C_SYSS): */ + +#define I2C_SYSS_RDONE (1 << 0) /* Internel reset monitoring */ + #define I2C_SCLL_SCLL 0 #define I2C_SCLL_SCLL_M 0xFF #define I2C_SCLL_HSSCLL 8 diff --git a/drivers/power/Makefile b/drivers/power/Makefile index dd06514..db53173 100644 --- a/drivers/power/Makefile +++ b/drivers/power/Makefile @@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk LIB := $(obj)libpower.a COBJS-$(CONFIG_TWL4030_POWER) += twl4030.o +COBJS-$(CONFIG_TWL6030_POWER) += twl6030.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/power/twl6030.c b/drivers/power/twl6030.c new file mode 100644 index 0000000..cf1da6b --- /dev/null +++ b/drivers/power/twl6030.c @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <config.h> +#ifdef CONFIG_TWL6030_POWER + +#include <twl6030.h> + +/* Functions to read and write from TWL6030 */ +static inline int twl6030_i2c_write_u8(u8 chip_no, u8 val, u8 reg) +{ + return i2c_write(chip_no, reg, 1, &val, 1); +} + +static inline int twl6030_i2c_read_u8(u8 chip_no, u8 *val, u8 reg) +{ + return i2c_read(chip_no, reg, 1, val, 1); +} + +void twl6030_start_usb_charging(void) +{ + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VICHRG_1500, + CHARGERUSB_VICHRG); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CIN_LIMIT_NONE, + CHARGERUSB_CINLIMIT); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MBAT_TEMP, + CONTROLLER_INT_MASK); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, MASK_MCHARGERUSB_THMREG, + CHARGERUSB_INT_MASK); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_VOREG_4P0, + CHARGERUSB_VOREG); + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CHARGERUSB_CTRL2_VITERM_100, + CHARGERUSB_CTRL2); + /* Enable USB charging */ + twl6030_i2c_write_u8(TWL6030_CHIP_CHARGER, CONTROLLER_CTRL1_EN_CHARGER, + CONTROLLER_CTRL1); + return; +} + +void twl6030_init_battery_charging(void) +{ + twl6030_start_usb_charging(); + return; +} + +void twl6030_usb_device_settings() +{ + u8 data = 0; + + /* Select APP Group and set state to ON */ + twl6030_i2c_write_u8(TWL6030_CHIP_PM, 0x21, VUSB_CFG_STATE); + + twl6030_i2c_read_u8(TWL6030_CHIP_PM, &data, MISC2); + data |= 0x10; + + /* Select the input supply for VBUS regulator */ + twl6030_i2c_write_u8(TWL6030_CHIP_PM, data, MISC2); +} +#endif diff --git a/drivers/usb/musb/omap3.c b/drivers/usb/musb/omap3.c index a983552..c7876ed 100644 --- a/drivers/usb/musb/omap3.c +++ b/drivers/usb/musb/omap3.c @@ -31,6 +31,7 @@ */ #include <twl4030.h> +#include <twl6030.h> #include "omap3.h" static int platform_needs_initialization = 1; @@ -65,7 +66,12 @@ static struct omap3_otg_regs *otg; #define OMAP3_OTG_SYSSTATUS_RESETDONE 0x0001 +/* OMAP4430 has an internal PHY, use it */ +#ifdef CONFIG_OMAP4430 +#define OMAP3_OTG_INTERFSEL_OMAP 0x0000 +#else #define OMAP3_OTG_INTERFSEL_OMAP 0x0001 +#endif #define OMAP3_OTG_FORCESTDBY_STANDBY 0x0001 @@ -105,6 +111,11 @@ int musb_platform_init(void) goto end; } #endif + +#ifdef CONFIG_TWL6030_POWER + twl6030_usb_device_settings(); +#endif + otg = (struct omap3_otg_regs *)OMAP3_OTG_BASE; /* Set OTG to always be on */ @@ -122,6 +133,11 @@ int musb_platform_init(void) #ifdef CONFIG_OMAP3_EVM musb_cfg.extvbus = omap3_evm_need_extvbus(); #endif + +#ifdef CONFIG_OMAP4430 + u32 *usbotghs_control = (u32 *)(CTRL_BASE + 0x33C); + *usbotghs_control = 0x15; +#endif platform_needs_initialization = 0; } diff --git a/drivers/usb/musb/omap3.h b/drivers/usb/musb/omap3.h index 2886d7e..b2acdf4 100644 --- a/drivers/usb/musb/omap3.h +++ b/drivers/usb/musb/omap3.h @@ -31,10 +31,11 @@ #ifndef _MUSB_OMAP3_H_ #define _MUSB_OMAP3_H_ +#include <asm/arch/cpu.h> #include "musb_core.h" /* Base address of MUSB registers */ -#define MENTOR_USB0_BASE (OMAP34XX_CORE_L4_IO_BASE + 0xAB000) +#define MENTOR_USB0_BASE MUSB_BASE /* Base address of OTG registers */ #define OMAP3_OTG_BASE (MENTOR_USB0_BASE + 0x400) diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index b1e40a3..a0d27a4 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -35,6 +35,7 @@ #define CONFIG_OMAP44XX 1 /* which is a 44XX */ #define CONFIG_OMAP4430 1 /* which is in a 4430 */ #define CONFIG_PANDA 1 /* working with Panda */ +#define CONFIG_ARCH_CPU_INIT /* Get CPU defs */ #include <asm/arch/cpu.h> @@ -102,12 +103,29 @@ #define CONFIG_DRIVER_OMAP34XX_I2C 1 #define CONFIG_I2C_MULTI_BUS 1 +/* TWL6030 */ +#define CONFIG_TWL6030_POWER 1 + /* MMC */ #define CONFIG_MMC 1 #define CONFIG_OMAP3_MMC 1 #define CONFIG_SYS_MMC_SET_DEV 1 #define CONFIG_DOS_PARTITION 1 +/* USB */ +#define CONFIG_MUSB_UDC 1 +#define CONFIG_USB_OMAP3 1 + +/* USB device configuration */ +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* Change these to suit your needs */ +#define CONFIG_USBD_VENDORID 0x0451 +#define CONFIG_USBD_PRODUCTID 0x5678 +#define CONFIG_USBD_MANUFACTURER "Texas Instruments" +#define CONFIG_USBD_PRODUCT_NAME "OMAP4 Panda" + /* Flash */ #define CONFIG_SYS_NO_FLASH 1 @@ -135,16 +153,21 @@ * Environment setup */ +#define CONFIG_BOOTDELAY 3 + /* allow overwriting serial config and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyS2,115200n8\0" \ + "usbtty=cdc_acm\0" \ + "vram=16M\0" \ "mmcdev=1\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ "mmcrootfstype=ext3 rootwait\0" \ "mmcargs=setenv bootargs console=${console} " \ + "vram=${vram} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ @@ -162,7 +185,6 @@ "else " \ "if run loaduimage; then " \ "run mmcboot; " \ - "else run nandboot; " \ "fi; " \ "fi; " \ "fi" @@ -195,7 +217,7 @@ #define CONFIG_SYS_LOAD_ADDR 0x80000000 /* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT1_BASE +#define CONFIG_SYS_TIMERBASE GPT2_BASE #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 diff --git a/include/configs/omap4_sdp4430.h b/include/configs/omap4_sdp4430.h index 8121554..d5439f9 100644 --- a/include/configs/omap4_sdp4430.h +++ b/include/configs/omap4_sdp4430.h @@ -36,6 +36,7 @@ #define CONFIG_OMAP44XX 1 /* which is a 44XX */ #define CONFIG_OMAP4430 1 /* which is in a 4430 */ #define CONFIG_4430SDP 1 /* working with SDP */ +#define CONFIG_ARCH_CPU_INIT /* Get CPU defs */ #include <asm/arch/cpu.h> @@ -103,12 +104,29 @@ #define CONFIG_DRIVER_OMAP34XX_I2C 1 #define CONFIG_I2C_MULTI_BUS 1 +/* TWL6030 */ +#define CONFIG_TWL6030_POWER 1 + /* MMC */ #define CONFIG_MMC 1 #define CONFIG_OMAP3_MMC 1 #define CONFIG_SYS_MMC_SET_DEV 1 #define CONFIG_DOS_PARTITION 1 +/* USB */ +#define CONFIG_MUSB_UDC 1 +#define CONFIG_USB_OMAP3 1 + +/* USB device configuration */ +#define CONFIG_USB_DEVICE 1 +#define CONFIG_USB_TTY 1 +#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1 +/* Change these to suit your needs */ +#define CONFIG_USBD_VENDORID 0x0451 +#define CONFIG_USBD_PRODUCTID 0x5678 +#define CONFIG_USBD_MANUFACTURER "Texas Instruments" +#define CONFIG_USBD_PRODUCT_NAME "SDP4430" + /* Flash */ #define CONFIG_SYS_NO_FLASH 1 @@ -136,16 +154,21 @@ * Environment setup */ +#define CONFIG_BOOTDELAY 3 + /* allow overwriting serial config and ethaddr */ #define CONFIG_ENV_OVERWRITE #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ "console=ttyS2,115200n8\0" \ + "usbtty=cdc_acm\0" \ + "vram=16M\0" \ "mmcdev=1\0" \ "mmcroot=/dev/mmcblk0p2 rw\0" \ "mmcrootfstype=ext3 rootwait\0" \ "mmcargs=setenv bootargs console=${console} " \ + "vram=${vram} " \ "root=${mmcroot} " \ "rootfstype=${mmcrootfstype}\0" \ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \ @@ -163,7 +186,6 @@ "else " \ "if run loaduimage; then " \ "run mmcboot; " \ - "else run nandboot; " \ "fi; " \ "fi; " \ "fi" @@ -196,7 +218,7 @@ #define CONFIG_SYS_LOAD_ADDR 0x80000000 /* Use General purpose timer 1 */ -#define CONFIG_SYS_TIMERBASE GPT1_BASE +#define CONFIG_SYS_TIMERBASE GPT2_BASE #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */ #define CONFIG_SYS_HZ 1000 diff --git a/include/twl6030.h b/include/twl6030.h new file mode 100644 index 0000000..54923ab --- /dev/null +++ b/include/twl6030.h @@ -0,0 +1,91 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <i2c.h> + +/* I2C chip addresses */ +#define TWL6030_CHIP_PM 0x48 + +#define TWL6030_CHIP_USB 0x49 +#define TWL6030_CHIP_ADC 0x49 +#define TWL6030_CHIP_CHARGER 0x49 +#define TWL6030_CHIP_PWM 0x49 + +/* Battery CHARGER REGISTERS */ +#define CONTROLLER_INT_MASK 0xE0 +#define CONTROLLER_CTRL1 0xE1 +#define CONTROLLER_WDG 0xE2 +#define CONTROLLER_STAT1 0xE3 +#define CHARGERUSB_INT_STATUS 0xE4 +#define CHARGERUSB_INT_MASK 0xE5 +#define CHARGERUSB_STATUS_INT1 0xE6 +#define CHARGERUSB_STATUS_INT2 0xE7 +#define CHARGERUSB_CTRL1 0xE8 +#define CHARGERUSB_CTRL2 0xE9 +#define CHARGERUSB_CTRL3 0xEA +#define CHARGERUSB_STAT1 0xEB +#define CHARGERUSB_VOREG 0xEC +#define CHARGERUSB_VICHRG 0xED +#define CHARGERUSB_CINLIMIT 0xEE +#define CHARGERUSB_CTRLLIMIT1 0xEF + +/* CHARGERUSB_VICHRG */ +#define CHARGERUSB_VICHRG_500 0x4 +#define CHARGERUSB_VICHRG_1500 0xE +/* CHARGERUSB_CINLIMIT */ +#define CHARGERUSB_CIN_LIMIT_100 0x1 +#define CHARGERUSB_CIN_LIMIT_300 0x5 +#define CHARGERUSB_CIN_LIMIT_500 0x9 +#define CHARGERUSB_CIN_LIMIT_NONE 0xF +/* CONTROLLER_INT_MASK */ +#define MVAC_FAULT (1 << 6) +#define MAC_EOC (1 << 5) +#define MBAT_REMOVED (1 << 4) +#define MFAULT_WDG (1 << 3) +#define MBAT_TEMP (1 << 2) +#define MVBUS_DET (1 << 1) +#define MVAC_DET (1 << 0) +/* CHARGERUSB_INT_MASK */ +#define MASK_MCURRENT_TERM (1 << 3) +#define MASK_MCHARGERUSB_STAT (1 << 2) +#define MASK_MCHARGERUSB_THMREG (1 << 1) +#define MASK_MCHARGERUSB_FAULT (1 << 0) +/* CHARGERUSB_VOREG */ +#define CHARGERUSB_VOREG_3P52 0x01 +#define CHARGERUSB_VOREG_4P0 0x19 +#define CHARGERUSB_VOREG_4P2 0x23 +#define CHARGERUSB_VOREG_4P76 0x3F +/* CHARGERUSB_CTRL2 */ +#define CHARGERUSB_CTRL2_VITERM_50 (0 << 5) +#define CHARGERUSB_CTRL2_VITERM_100 (1 << 5) +#define CHARGERUSB_CTRL2_VITERM_150 (2 << 5) +/* CONTROLLER_CTRL1 */ +#define CONTROLLER_CTRL1_EN_CHARGER (1 << 4) +#define CONTROLLER_CTRL1_SEL_CHARGER (1 << 3) + +#define VUSB_CFG_STATE 0xA2 +#define MISC2 0xE5 + +void twl6030_init_battery_charging(void); +void twl6030_usb_device_settings(void); |