diff options
315 files changed, 3303 insertions, 2171 deletions
@@ -2,6 +2,79 @@ Changes since U-Boot 1.1.4: ====================================================================== +* Changes/fixes for drivers/cfi_flash.c: + + - Add Intel legacy lock/unlock support to common CFI driver + + On some Intel flash's (e.g. Intel J3) legacy unlocking is + supported, meaning that unlocking of one sector will unlock + all sectors of this bank. Using this feature, unlocking + of all sectors upon startup (via env var "unlock=yes") will + get much faster. + + - Fixed problem with multiple reads of envronment variable + "unlock" as pointed out by Reinhard Arlt & Anders Larsen. + + - Removed unwanted linefeeds from "protect" command when + CFG_FLASH_PROTECTION is enabled. + + - Changed p3p400 board to use CFG_FLASH_PROTECTION + + Patch by Stefan Roese, 01 Apr 2006 + +* Changes/fixes for drivers/cfi_flash.c: + - Correctly handle the cases where CFG_HZ != 1000 (several + XScale-based boards) + - Fix the timeout calculation of buffered writes (off by a + factor of 1000) + Patch by Anders Larsen, 31 Mar 2006 + +* Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440) + + 405 SDRAM: - The SDRAM parameters can now be defined in the board + config file and the 405 SDRAM controller values will + be calculated upon bootup (see PPChameleonEVB). + When those settings are not defined in the board + config file, the register setup will be as it is now, + so this implementation should not break any current + design using this code. + + Thanks to Andrea Marson from DAVE for this patch. + + 440 DDR: - Added function sdram_tr1_set to auto calculate the + TR1 value for the DDR. + - Added ECC support (see p3p440). + + Patch by Stefan Roese, 17 Mar 2006 + +* Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S + Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473] + +* Add support for ymodem protocol download + Patch by Stefano Babic, 29 Mar 2006 + +* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000 + Merge from Markus Klotzbücher's repo, 01 Apr 2006 + +* GCC-4.x fixes: clean up global data pointer initialization for all + boards + +* Update for Delta board: + - redundant NAND environment + - misc Monahans cleanups (remove dead code etc.) + - DA9030 Initialization; some minimal changes to PXA I2C driver to + make it work with the Monahans. + - Make Monahans clock frequency configurable using + CFG_MONAHANS_RUN_MODE_OSC_RATIO and + CFG_MONAHANS_TURBO_RUN_MODE_RATIO. + Merge from Markus Klotzbücher's repo, 25 Mar 2006 + +* Enable Quad UART om MCC200 board. + +* Cleanup MCC200 board configuration; omit non-existent stuff. + +* Add support for MPC859/866 Rev. A.0 + * Add command for handling DDR ECC registers on MPC8349EE MDS board. * Fix DDR ECC bit definitions for MPC83xx. @@ -246,6 +246,7 @@ The following options need to be configured: CONFIG_SA1110 CONFIG_ARM7 CONFIG_PXA250 + CONFIG_CPU_MONAHANS MicroBlaze based CPUs: ---------------------- @@ -304,13 +305,13 @@ The following options need to be configured: ----------------- CONFIG_ARMADILLO, CONFIG_AT91RM9200DK, CONFIG_CERF250, - CONFIG_CSB637, CONFIG_DNP1110, CONFIG_EP7312, - CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, CONFIG_IMPA7, - CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, CONFIG_KB9202, - CONFIG_LART, CONFIG_LPD7A400, CONFIG_LUBBOCK, - CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON, - CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410, - CONFIG_TRAB, CONFIG_VCMA9 + CONFIG_CSB637, CONFIG_DELTA, CONFIG_DNP1110, + CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, + CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, + CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400, + CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, + CONFIG_SHANNON, CONFIG_P2_OMAP730, CONFIG_SMDK2400, + CONFIG_SMDK2410, CONFIG_TRAB, CONFIG_VCMA9 MicroBlaze based boards: ------------------------ @@ -379,6 +380,20 @@ The following options need to be configured: that this requires a (stable) reference clock (32 kHz RTC clock or CFG_8XX_XIN) +- Intel Monahans options: + CFG_MONAHANS_RUN_MODE_OSC_RATIO + + Defines the Monahans run mode to oscillator + ratio. Valid values are 8, 16, 24, 31. The core + frequency is this value multiplied by 13 MHz. + + CFG_MONAHANS_TURBO_RUN_MODE_RATIO + + Defines the Monahans turbo mode to oscillator + ratio. Valid values are 1 (default if undefined) and + 2. The core frequency as calculated above is multiplied + by this value. + - Linux Kernel Interface: CONFIG_CLOCKS_IN_MHZ @@ -1969,6 +1984,17 @@ to save the current settings. These two #defines specify the offset and size of the environment area within the first NAND device. + - CFG_ENV_OFFSET_REDUND + + This setting describes a second storage area of CFG_ENV_SIZE + size used to hold a redundant copy of the environment data, + so that there is a valid backup copy in case there is a + power failure during a "saveenv" operation. + + Note: CFG_ENV_OFFSET and CFG_ENV_OFFSET_REDUND must be aligned + to a block boundary, and CFG_ENV_SIZE must be a multiple of + the NAND devices block size. + - CFG_SPI_INIT_OFFSET Defines offset to the initial SPI buffer area in DPRAM. The @@ -3283,6 +3309,8 @@ On ARM, the following registers are used: ==> U-Boot will use R8 to hold a pointer to the global data +NOTE: DECLARE_GLOBAL_DATA_PTR must be used with file-global scope, +or current versions of GCC may "optimize" the code too much. Memory Management: ------------------ diff --git a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c index 0934e1b..40f41c7 100644 --- a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c +++ b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c @@ -1,6 +1,7 @@ /* * (C) Copyright 2002 * Hyperion Entertainment, ThomasF@hyperion-entertainment.com + * (C) Copyright 2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -88,8 +89,6 @@ long initdram (int board_type) void after_reloc (ulong dest_addr, gd_t *gd) { -/* HJF: DECLARE_GLOBAL_DATA_PTR; */ - board_init_r (gd, dest_addr); } diff --git a/board/MAI/AmigaOneG3SE/articiaS.c b/board/MAI/AmigaOneG3SE/articiaS.c index a4dad64..3901b80 100644 --- a/board/MAI/AmigaOneG3SE/articiaS.c +++ b/board/MAI/AmigaOneG3SE/articiaS.c @@ -29,6 +29,8 @@ #include "smbus.h" #include "via686.h" +DECLARE_GLOBAL_DATA_PTR; + #undef DEBUG struct dimm_bank { @@ -82,7 +84,6 @@ static inline unsigned short NSto10PS (unsigned char spd_byte) long detect_sdram (uint8 * rom, int dimmNum, struct dimm_bank *banks) { - DECLARE_GLOBAL_DATA_PTR; int dimm_address = (dimmNum == 0) ? SM_DIMM0_ADDR : SM_DIMM1_ADDR; uint32 busclock = gd->bus_clk; uint32 memclock = busclock; @@ -394,8 +395,6 @@ uint32 burst_to_len (uint32 support) long articiaS_ram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - register uint32 i; register uint32 value1; register uint32 value2; diff --git a/board/MAI/AmigaOneG3SE/articiaS_pci.c b/board/MAI/AmigaOneG3SE/articiaS_pci.c index d2e9f29..480dae5 100644 --- a/board/MAI/AmigaOneG3SE/articiaS_pci.c +++ b/board/MAI/AmigaOneG3SE/articiaS_pci.c @@ -26,6 +26,8 @@ #include "memio.h" #include "articiaS.h" +DECLARE_GLOBAL_DATA_PTR; + #undef ARTICIA_PCI_DEBUG #ifdef ARTICIA_PCI_DEBUG @@ -493,8 +495,6 @@ pci_dev_t video_dev; int articiaS_init_vga (void) { - DECLARE_GLOBAL_DATA_PTR; - extern void shutdown_bios(void); pci_dev_t dev = ~0; int busnr = 0; diff --git a/board/MAI/AmigaOneG3SE/cmd_boota.c b/board/MAI/AmigaOneG3SE/cmd_boota.c index 3e2835a..143bba2 100644 --- a/board/MAI/AmigaOneG3SE/cmd_boota.c +++ b/board/MAI/AmigaOneG3SE/cmd_boota.c @@ -3,6 +3,7 @@ #include "../disk/part_amiga.h" #include <asm/cache.h> +DECLARE_GLOBAL_DATA_PTR; #undef BOOTA_DEBUG @@ -108,8 +109,6 @@ int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) s = getenv ("autostart"); if (s && strcmp (s, "yes") == 0) { - DECLARE_GLOBAL_DATA_PTR; - void (*boot) (bd_t *, char *, block_dev_desc_t *); char *args; diff --git a/board/MAI/AmigaOneG3SE/serial.c b/board/MAI/AmigaOneG3SE/serial.c index e83fb46..b6f57c7 100644 --- a/board/MAI/AmigaOneG3SE/serial.c +++ b/board/MAI/AmigaOneG3SE/serial.c @@ -4,6 +4,8 @@ #include "memio.h" #include "articiaS.h" +DECLARE_GLOBAL_DATA_PTR; + #ifndef CFG_NS16550 static uint32 ComPort1; @@ -150,8 +152,6 @@ const NS16550_t Com1 = (NS16550_t) CFG_NS16550_COM2; int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - uint32 clock_divisor = 115200 / gd->baudrate; NS16550_init (Com0, clock_divisor); @@ -239,8 +239,6 @@ void serial_puts (const char *string) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - uint32 clock_divisor = 115200 / gd->baudrate; NS16550_init (Com0, clock_divisor); diff --git a/board/MAI/AmigaOneG3SE/via686.c b/board/MAI/AmigaOneG3SE/via686.c index c797e47..3606db8 100644 --- a/board/MAI/AmigaOneG3SE/via686.c +++ b/board/MAI/AmigaOneG3SE/via686.c @@ -28,6 +28,8 @@ #include "via686.h" #include "i8259.h" +DECLARE_GLOBAL_DATA_PTR; + #undef VIA_DEBUG #ifdef VIA_DEBUG @@ -226,33 +228,31 @@ __asm (" .globl via_calibrate_time_base \n" extern unsigned long via_calibrate_time_base(void); -void via_calibrate_bus_freq(void) +void via_calibrate_bus_freq (void) { - DECLARE_GLOBAL_DATA_PTR; - - unsigned long tb; + unsigned long tb; - /* This is 20 microseconds */ - #define CALIBRATE_TIME 28636 + /* This is 20 microseconds */ +#define CALIBRATE_TIME 28636 + /* Enable the timer (and disable speaker) */ + unsigned char c; - /* Enable the timer (and disable speaker) */ - unsigned char c; - c = in_byte(0x61); - out_byte(0x61, ((c & ~0x02) | 0x01)); + c = in_byte (0x61); + out_byte (0x61, ((c & ~0x02) | 0x01)); - /* Set timer 2 to low/high writing */ - out_byte(0x43, 0xb0); - out_byte(0x42, CALIBRATE_TIME & 0xff); - out_byte(0x42, CALIBRATE_TIME >>8); + /* Set timer 2 to low/high writing */ + out_byte (0x43, 0xb0); + out_byte (0x42, CALIBRATE_TIME & 0xff); + out_byte (0x42, CALIBRATE_TIME >> 8); - /* Read the time base */ - tb = via_calibrate_time_base(); + /* Read the time base */ + tb = via_calibrate_time_base (); - if (tb >= 700000) - gd->bus_clk = 133333333; - else - gd->bus_clk = 100000000; + if (tb >= 700000) + gd->bus_clk = 133333333; + else + gd->bus_clk = 100000000; } diff --git a/board/MAI/AmigaOneG3SE/video.c b/board/MAI/AmigaOneG3SE/video.c index 36e3c62..f6327f7 100644 --- a/board/MAI/AmigaOneG3SE/video.c +++ b/board/MAI/AmigaOneG3SE/video.c @@ -26,6 +26,8 @@ #include "memio.h" #include <part.h> +DECLARE_GLOBAL_DATA_PTR; + unsigned char *cursor_position; unsigned int cursor_row; unsigned int cursor_col; @@ -480,7 +482,6 @@ extern char version_string[]; void video_banner(void) { block_dev_desc_t *ide; - DECLARE_GLOBAL_DATA_PTR; int i; char *s; int maxdev; diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c index 9d0d213..6a1d4d7 100644 --- a/board/Marvell/common/serial.c +++ b/board/Marvell/common/serial.c @@ -45,13 +45,13 @@ #include "ns16550.h" +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_MPSC int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - #if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2) int clock_divisor = 230400 / gd->baudrate; #endif @@ -88,8 +88,6 @@ int serial_tstc (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate); } @@ -97,8 +95,6 @@ void serial_setbrg (void) int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = 230400 / gd->baudrate; #ifdef CFG_INIT_CHAN1 @@ -130,8 +126,6 @@ int serial_tstc (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = 230400 / gd->baudrate; #ifdef CFG_INIT_CHAN1 diff --git a/board/Marvell/db64360/mpsc.c b/board/Marvell/db64360/mpsc.c index ccb3adc..d8acd31 100644 --- a/board/Marvell/db64360/mpsc.c +++ b/board/Marvell/db64360/mpsc.c @@ -42,6 +42,8 @@ #include "../include/memory.h" +DECLARE_GLOBAL_DATA_PTR; + /* Define this if you wish to use the MPSC as a register based UART. * This will force the serial port to not use the SDMA engine at all. */ @@ -114,9 +116,7 @@ static void mpsc_debug_init (void) /* Clear the CFR (CHR4) */ /* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */ - temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_indent: Standard input:229: Warning:old style assignment ambiguity in "=&". Assuming "= &" - -REG_GAP)); + temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP)); temp &= 0xffffff00; temp |= BIT29; GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP), @@ -158,7 +158,6 @@ char mpsc_getchar_debug (void) * global variables [josh] */ int mpsc_putchar_early (char ch) { - DECLARE_GLOBAL_DATA_PTR; int mpsc = CHANNEL; int temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); @@ -511,7 +510,6 @@ void mpsc_init2 (void) int galbrg_set_baudrate (int channel, int rate) { - DECLARE_GLOBAL_DATA_PTR; int clock; galbrg_disable (channel); /*ok */ diff --git a/board/Marvell/db64360/mv_eth.c b/board/Marvell/db64360/mv_eth.c index 3c5dee7..e5a87ad 100644 --- a/board/Marvell/db64360/mv_eth.c +++ b/board/Marvell/db64360/mv_eth.c @@ -732,6 +732,7 @@ int mv64360_eth_xmit (struct eth_device *dev, volatile void *dataPtr, pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */ pkt_info.byte_cnt = dataSize; pkt_info.buf_ptr = (unsigned int) dataPtr; + pkt_info.return_info = 0; status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info); if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) { diff --git a/board/Marvell/db64360/sdram_init.c b/board/Marvell/db64360/sdram_init.c index d2635f8..f04aaf9 100644 --- a/board/Marvell/db64360/sdram_init.c +++ b/board/Marvell/db64360/sdram_init.c @@ -42,6 +42,8 @@ #include "64360.h" #include "mv_regs.h" +DECLARE_GLOBAL_DATA_PTR; + #undef DEBUG #define MAP_PCI @@ -246,8 +248,6 @@ static inline unsigned short NSto10PS (unsigned char spd_byte) /* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long spd_checksum; #ifdef ZUMA_NTL diff --git a/board/Marvell/db64460/mpsc.c b/board/Marvell/db64460/mpsc.c index 33fbc49..b783aff 100644 --- a/board/Marvell/db64460/mpsc.c +++ b/board/Marvell/db64460/mpsc.c @@ -42,6 +42,8 @@ #include "../include/memory.h" +DECLARE_GLOBAL_DATA_PTR; + /* Define this if you wish to use the MPSC as a register based UART. * This will force the serial port to not use the SDMA engine at all. */ @@ -114,9 +116,7 @@ static void mpsc_debug_init (void) /* Clear the CFR (CHR4) */ /* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */ - temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_indent: Standard input:229: Warning:old style assignment ambiguity in "=&". Assuming "= &" - -REG_GAP)); + temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP)); temp &= 0xffffff00; temp |= BIT29; GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP), @@ -158,7 +158,6 @@ char mpsc_getchar_debug (void) * global variables [josh] */ int mpsc_putchar_early (char ch) { - DECLARE_GLOBAL_DATA_PTR; int mpsc = CHANNEL; int temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); @@ -511,7 +510,6 @@ void mpsc_init2 (void) int galbrg_set_baudrate (int channel, int rate) { - DECLARE_GLOBAL_DATA_PTR; int clock; galbrg_disable (channel); /*ok */ diff --git a/board/Marvell/db64460/mv_eth.c b/board/Marvell/db64460/mv_eth.c index ec5d581..b2c7835 100644 --- a/board/Marvell/db64460/mv_eth.c +++ b/board/Marvell/db64460/mv_eth.c @@ -731,6 +731,7 @@ int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr, pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */ pkt_info.byte_cnt = dataSize; pkt_info.buf_ptr = (unsigned int) dataPtr; + pkt_info.return_info = 0; status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info); if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) { diff --git a/board/Marvell/db64460/sdram_init.c b/board/Marvell/db64460/sdram_init.c index 8cfe84c..1762202 100644 --- a/board/Marvell/db64460/sdram_init.c +++ b/board/Marvell/db64460/sdram_init.c @@ -42,6 +42,8 @@ #include "64460.h" #include "mv_regs.h" +DECLARE_GLOBAL_DATA_PTR; + #undef DEBUG #define MAP_PCI @@ -246,8 +248,6 @@ static inline unsigned short NSto10PS (unsigned char spd_byte) /* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long spd_checksum; #ifdef ZUMA_NTL diff --git a/board/adsvix/adsvix.c b/board/adsvix/adsvix.c index 5e770e9..c430d63 100644 --- a/board/adsvix/adsvix.c +++ b/board/adsvix/adsvix.c @@ -30,6 +30,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* @@ -38,8 +40,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -62,8 +62,6 @@ int board_late_init(void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c index a2595ee..dcafac9 100644 --- a/board/amcc/ebony/ebony.c +++ b/board/amcc/ebony/ebony.c @@ -28,6 +28,8 @@ #define FLASH_ONBD_N 2 /* 00000010 */ #define FLASH_SRAM_SEL 1 /* 00000001 */ +DECLARE_GLOBAL_DATA_PTR; + long int fixed_sdram(void); int board_early_init_f(void) @@ -107,7 +109,7 @@ long int initdram(int board_type) long dram_size = 0; #if defined(CONFIG_SPD_EEPROM) - dram_size = spd_sdram(0); + dram_size = spd_sdram(); #else dram_size = fixed_sdram(); #endif @@ -235,8 +237,6 @@ int pci_pre_init(struct pci_controller *hose) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index c6b79a9..06a57f6 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -28,6 +28,7 @@ #include <spd_sdram.h> #include "epld.h" +DECLARE_GLOBAL_DATA_PTR; extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ @@ -291,8 +292,6 @@ int pci_pre_init( struct pci_controller *hose ) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c index d1a29c5..3f6d204 100644 --- a/board/amcc/ocotea/ocotea.c +++ b/board/amcc/ocotea/ocotea.c @@ -30,6 +30,8 @@ #include <spd_sdram.h> #include <ppc4xx_enet.h> +DECLARE_GLOBAL_DATA_PTR; + #define BOOT_SMALL_FLASH 32 /* 00100000 */ #define FLASH_ONBD_N 2 /* 00000010 */ #define FLASH_SRAM_SEL 1 /* 00000001 */ @@ -204,7 +206,7 @@ long int initdram (int board_type) long dram_size = 0; #if defined(CONFIG_SPD_EEPROM) - dram_size = spd_sdram (0); + dram_size = spd_sdram (); #else dram_size = fixed_sdram (); #endif @@ -334,8 +336,6 @@ int pci_pre_init(struct pci_controller * hose ) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose ) { - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c index f1a96a6..292e026 100644 --- a/board/amcc/walnut/walnut.c +++ b/board/amcc/walnut/walnut.c @@ -99,7 +99,7 @@ void sdram_init(void) */ long int initdram(int board_type) { - return spd_sdram(0); + return spd_sdram(); } int testdram(void) diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c index 8ddf910..20965c8 100644 --- a/board/amcc/yellowstone/yellowstone.c +++ b/board/amcc/yellowstone/yellowstone.c @@ -24,6 +24,8 @@ #include <asm/processor.h> #include <spd_sdram.h> +DECLARE_GLOBAL_DATA_PTR; + extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ int board_early_init_f(void) @@ -136,7 +138,6 @@ int board_early_init_f(void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; uint pbcr; int size_val = 0; diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 509d8e4..392d0dc 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -24,6 +24,8 @@ #include <asm/processor.h> #include <spd_sdram.h> +DECLARE_GLOBAL_DATA_PTR; + extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ int board_early_init_f(void) @@ -132,7 +134,6 @@ int board_early_init_f(void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; uint pbcr; int size_val = 0; diff --git a/board/amirix/ap1000/serial.c b/board/amirix/ap1000/serial.c index 39c4157..c6ee772 100644 --- a/board/amirix/ap1000/serial.c +++ b/board/amirix/ap1000/serial.c @@ -27,9 +27,7 @@ #include <ns16550.h> -#if 0 -#include "serial.h" -#endif +DECLARE_GLOBAL_DATA_PTR; const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1, (NS16550_t) CFG_NS16550_COM2 }; @@ -40,8 +38,6 @@ static int gComPort = 0; int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; (void) NS16550_init (COM_PORTS[0], clock_divisor); @@ -71,8 +67,6 @@ int serial_tstc (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; #ifdef CFG_INIT_CHAN1 diff --git a/board/armadillo/armadillo.c b/board/armadillo/armadillo.c index de04c66..ca5bd1d 100644 --- a/board/armadillo/armadillo.c +++ b/board/armadillo/armadillo.c @@ -28,6 +28,8 @@ #include <common.h> #include <clps7111.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ @@ -37,8 +39,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Activate LED flasher */ IO_LEDFLSH = 0x40; @@ -53,8 +53,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/assabet/assabet.c b/board/assabet/assabet.c index d3ccbb5..4f84a58 100644 --- a/board/assabet/assabet.c +++ b/board/assabet/assabet.c @@ -27,6 +27,8 @@ #include <common.h> #include <SA-1100.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* @@ -99,8 +101,6 @@ neponset_init(void) int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_arch_number = MACH_TYPE_ASSABET; gd->bd->bi_boot_params = 0xc0000100; @@ -112,8 +112,6 @@ board_init(void) int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/at91rm9200dk/at91rm9200dk.c b/board/at91rm9200dk/at91rm9200dk.c index 9016776..002981a 100644 --- a/board/at91rm9200dk/at91rm9200dk.c +++ b/board/at91rm9200dk/at91rm9200dk.c @@ -27,6 +27,8 @@ #include <at91rm9200_net.h> #include <dm9161.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* * Miscelaneous platform dependent initialisations @@ -34,8 +36,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Enable Ctrlc */ console_init_f (); @@ -56,8 +56,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM; gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; return 0; diff --git a/board/bmw/serial.c b/board/bmw/serial.c index f36a41b..712a95b 100644 --- a/board/bmw/serial.c +++ b/board/bmw/serial.c @@ -24,6 +24,8 @@ #include <common.h> #include "ns16550.h" +DECLARE_GLOBAL_DATA_PTR; + #if CONFIG_CONS_INDEX == 1 static struct NS16550 *console = (struct NS16550 *) (CFG_EUMB_ADDR + 0x4500); @@ -38,8 +40,6 @@ extern ulong get_bus_freq (ulong); int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = gd->bus_clk / 16 / gd->baudrate; NS16550_init (CONFIG_CONS_INDEX - 1, clock_divisor); @@ -75,8 +75,6 @@ int serial_tstc (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = get_bus_freq (0) / 16 / gd->baudrate; NS16550_reinit (console, clock_divisor); diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c index cc1bc16..307894f 100644 --- a/board/cerf250/cerf250.c +++ b/board/cerf250/cerf250.c @@ -27,6 +27,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ @@ -36,8 +38,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -60,8 +60,6 @@ int board_late_init(void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/cm4008/cm4008.c b/board/cm4008/cm4008.c index 4d2013b..d34737c 100644 --- a/board/cm4008/cm4008.c +++ b/board/cm4008/cm4008.c @@ -31,6 +31,8 @@ #include <common.h> #include <asm/arch/platform.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ #define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) @@ -75,8 +77,6 @@ int board_late_init (void) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of CM4008 */ gd->bd->bi_arch_number = 624; @@ -92,8 +92,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/cm41xx/cm41xx.c b/board/cm41xx/cm41xx.c index 65eaa94..02d05af 100644 --- a/board/cm41xx/cm41xx.c +++ b/board/cm41xx/cm41xx.c @@ -31,6 +31,8 @@ #include <common.h> #include <asm/arch/platform.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ #define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) @@ -75,8 +77,6 @@ int board_late_init (void) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of CM41xx */ gd->bd->bi_arch_number = 672; @@ -92,8 +92,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/cmc_pu2/cmc_pu2.c b/board/cmc_pu2/cmc_pu2.c index 14168e6..9ae3c42 100644 --- a/board/cmc_pu2/cmc_pu2.c +++ b/board/cmc_pu2/cmc_pu2.c @@ -33,6 +33,8 @@ #include <at91rm9200_net.h> #include <dm9161.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* * Miscelaneous platform dependent initialisations @@ -45,7 +47,6 @@ int hw_detect (void); int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; AT91PS_PIO piob = AT91C_BASE_PIOB; AT91PS_PIO pioc = AT91C_BASE_PIOC; @@ -109,8 +110,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM; gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; return 0; diff --git a/board/cogent/serial.c b/board/cogent/serial.c index 4c20017..2b595a8 100644 --- a/board/cogent/serial.c +++ b/board/cogent/serial.c @@ -6,6 +6,8 @@ #include <common.h> #include <board/cogent/serial.h> +DECLARE_GLOBAL_DATA_PTR; + #if (CMA_MB_CAPS & CMA_MB_CAP_SERPAR) #if (defined(CONFIG_8xx) && defined(CONFIG_8xx_CONS_NONE)) || \ @@ -25,76 +27,65 @@ int serial_init (void) { -/* DECLARE_GLOBAL_DATA_PTR; */ - - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE; + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE; - cma_mb_reg_write(&mbsp->ser_ier, 0x00); /* turn off interrupts */ - serial_setbrg (); - cma_mb_reg_write(&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */ - cma_mb_reg_write(&mbsp->ser_mcr, 0x03); /* RTS/DTR */ - cma_mb_reg_write(&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */ + cma_mb_reg_write (&mbsp->ser_ier, 0x00); /* turn off interrupts */ + serial_setbrg (); + cma_mb_reg_write (&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */ + cma_mb_reg_write (&mbsp->ser_mcr, 0x03); /* RTS/DTR */ + cma_mb_reg_write (&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */ - return (0); + return (0); } -void -serial_setbrg (void) +void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE; - unsigned int divisor; - unsigned char lcr; - - if ((divisor = br_to_div(gd->baudrate)) == 0) - divisor = DEFDIV; - - lcr = cma_mb_reg_read(&mbsp->ser_lcr); - cma_mb_reg_write(&mbsp->ser_lcr, lcr|0x80);/* Access baud rate(set DLAB)*/ - cma_mb_reg_write(&mbsp->ser_brl, divisor & 0xff); - cma_mb_reg_write(&mbsp->ser_brh, (divisor >> 8) & 0xff); - cma_mb_reg_write(&mbsp->ser_lcr, lcr); /* unset DLAB */ + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE; + unsigned int divisor; + unsigned char lcr; + + if ((divisor = br_to_div (gd->baudrate)) == 0) + divisor = DEFDIV; + + lcr = cma_mb_reg_read (&mbsp->ser_lcr); + cma_mb_reg_write (&mbsp->ser_lcr, lcr | 0x80); /* Access baud rate(set DLAB) */ + cma_mb_reg_write (&mbsp->ser_brl, divisor & 0xff); + cma_mb_reg_write (&mbsp->ser_brh, (divisor >> 8) & 0xff); + cma_mb_reg_write (&mbsp->ser_lcr, lcr); /* unset DLAB */ } -void -serial_putc(const char c) +void serial_putc (const char c) { - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE; + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE; - if (c == '\n') - serial_putc('\r'); + if (c == '\n') + serial_putc ('\r'); - while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_THRE) == 0) - ; + while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_THRE) == 0); - cma_mb_reg_write(&mbsp->ser_thr, c); + cma_mb_reg_write (&mbsp->ser_thr, c); } -void -serial_puts(const char *s) +void serial_puts (const char *s) { - while (*s != '\0') - serial_putc(*s++); + while (*s != '\0') + serial_putc (*s++); } -int -serial_getc(void) +int serial_getc (void) { - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE; + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE; - while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) == 0) - ; + while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) == 0); - return ((int)cma_mb_reg_read(&mbsp->ser_rhr) & 0x7f); + return ((int) cma_mb_reg_read (&mbsp->ser_rhr) & 0x7f); } -int -serial_tstc(void) +int serial_tstc (void) { - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE; + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE; - return ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) != 0); + return ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) != 0); } #endif /* CONS_NONE */ @@ -118,71 +109,63 @@ serial_tstc(void) #error CONFIG_KGDB_INDEX must be configured for Cogent motherboard serial #endif -void -kgdb_serial_init(void) +void kgdb_serial_init (void) { - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE; - unsigned int divisor; + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE; + unsigned int divisor; - if ((divisor = br_to_div(CONFIG_KGDB_BAUDRATE)) == 0) - divisor = DEFDIV; + if ((divisor = br_to_div (CONFIG_KGDB_BAUDRATE)) == 0) + divisor = DEFDIV; - cma_mb_reg_write(&mbsp->ser_ier, 0x00); /* turn off interrupts */ - cma_mb_reg_write(&mbsp->ser_lcr, 0x80); /* Access baud rate(set DLAB)*/ - cma_mb_reg_write(&mbsp->ser_brl, divisor & 0xff); - cma_mb_reg_write(&mbsp->ser_brh, (divisor >> 8) & 0xff); - cma_mb_reg_write(&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */ - cma_mb_reg_write(&mbsp->ser_mcr, 0x03); /* RTS/DTR */ - cma_mb_reg_write(&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */ + cma_mb_reg_write (&mbsp->ser_ier, 0x00); /* turn off interrupts */ + cma_mb_reg_write (&mbsp->ser_lcr, 0x80); /* Access baud rate(set DLAB) */ + cma_mb_reg_write (&mbsp->ser_brl, divisor & 0xff); + cma_mb_reg_write (&mbsp->ser_brh, (divisor >> 8) & 0xff); + cma_mb_reg_write (&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */ + cma_mb_reg_write (&mbsp->ser_mcr, 0x03); /* RTS/DTR */ + cma_mb_reg_write (&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */ - printf("[on cma10x serial port B] "); + printf ("[on cma10x serial port B] "); } -void -putDebugChar(int c) +void putDebugChar (int c) { - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE; + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE; - while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_THRE) == 0) - ; + while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_THRE) == 0); - cma_mb_reg_write(&mbsp->ser_thr, c & 0xff); + cma_mb_reg_write (&mbsp->ser_thr, c & 0xff); } -void -putDebugStr(const char *str) +void putDebugStr (const char *str) { - while (*str != '\0') { - if (*str == '\n') - putDebugChar('\r'); - putDebugChar(*str++); - } + while (*str != '\0') { + if (*str == '\n') + putDebugChar ('\r'); + putDebugChar (*str++); + } } -int -getDebugChar(void) +int getDebugChar (void) { - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE; + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE; - while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) == 0) - ; + while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) == 0); - return ((int)cma_mb_reg_read(&mbsp->ser_rhr) & 0x7f); + return ((int) cma_mb_reg_read (&mbsp->ser_rhr) & 0x7f); } -void -kgdb_interruptible(int yes) +void kgdb_interruptible (int yes) { - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE; - - if (yes == 1) { - printf("kgdb: turning serial ints on\n"); - cma_mb_reg_write(&mbsp->ser_ier, 0xf); - } - else { - printf("kgdb: turning serial ints off\n"); - cma_mb_reg_write(&mbsp->ser_ier, 0x0); - } + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE; + + if (yes == 1) { + printf ("kgdb: turning serial ints on\n"); + cma_mb_reg_write (&mbsp->ser_ier, 0xf); + } else { + printf ("kgdb: turning serial ints off\n"); + cma_mb_reg_write (&mbsp->ser_ier, 0x0); + } } #endif /* KGDB && KGDB_NONE */ diff --git a/board/cradle/cradle.c b/board/cradle/cradle.c index 6f65f32..6d8d555 100644 --- a/board/cradle/cradle.c +++ b/board/cradle/cradle.c @@ -28,6 +28,8 @@ #include <asm/arch/pxa-regs.h> #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ @@ -181,8 +183,6 @@ int board_init (void) /**********************************************************/ { - DECLARE_GLOBAL_DATA_PTR; - led_code (0xf, YELLOW); /* arch number of HHP Cradle */ @@ -209,8 +209,6 @@ int dram_init (void) /**********************************************************/ { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c index c99a715..80caf8b 100644 --- a/board/csb226/csb226.c +++ b/board/csb226/csb226.c @@ -26,6 +26,8 @@ #include <common.h> #include <asm/arch/pxa-regs.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_SHOW_BOOT_PROGRESS # define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) #else @@ -65,8 +67,6 @@ int misc_init_r(void) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -88,8 +88,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/csb637/csb637.c b/board/csb637/csb637.c index 6100a53..aeb1a13 100644 --- a/board/csb637/csb637.c +++ b/board/csb637/csb637.c @@ -26,6 +26,8 @@ #include <at91rm9200_net.h> #include <bcm5221.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* * Miscelaneous platform dependent initialisations @@ -33,8 +35,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Enable Ctrlc */ console_init_f (); @@ -51,8 +51,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM; gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; return 0; diff --git a/board/cu824/cu824.c b/board/cu824/cu824.c index 5844a5c..3edd27a 100644 --- a/board/cu824/cu824.c +++ b/board/cu824/cu824.c @@ -2,7 +2,7 @@ * (C) Copyright 2001 * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. * - * (C) Copyright 2001, 2002 + * (C) Copyright 2001-2006 * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> * See file CREDITS for list of people who contributed to this @@ -29,12 +29,12 @@ #include <asm/processor.h> #include <pci.h> +DECLARE_GLOBAL_DATA_PTR; + #define BOARD_REV_REG 0xFE80002B int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char revision = *(volatile char *)(BOARD_REV_REG); char buf[32]; diff --git a/board/dave/B2/B2.c b/board/dave/B2/B2.c index 29676b8..64fe948 100644 --- a/board/dave/B2/B2.c +++ b/board/dave/B2/B2.c @@ -27,13 +27,14 @@ #include <common.h> #include <asm/hardware.h> +DECLARE_GLOBAL_DATA_PTR; + /* * Miscelaneous platform dependent initialization */ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; u32 temp; /* Configuration Port Control Register*/ @@ -119,8 +120,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c index 52055b8..e8302d9 100644 --- a/board/dave/PPChameleonEVB/PPChameleonEVB.c +++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c @@ -29,6 +29,8 @@ #include <command.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* Prototypes */ @@ -81,8 +83,6 @@ extern flash_info_t flash_info[]; /* info for FLASH chips */ int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - /* adjust flash start and size as well as the offset */ gd->bd->bi_flashstart = 0 - flash_info[0].size; gd->bd->bi_flashoffset= flash_info[0].size - CFG_MONITOR_LEN; diff --git a/board/delta/config.mk b/board/delta/config.mk index 9564625..c72e956 100644 --- a/board/delta/config.mk +++ b/board/delta/config.mk @@ -2,7 +2,7 @@ #TEXT_BASE = 0xa1700000 #TEXT_BASE = 0xa3080000 #TEXT_BASE = 0x9ffe0000 -TEXT_BASE = 0xa3008000 +TEXT_BASE = 0x83008000 # Compile the new NAND code (needed iff #ifdef CONFIG_NEW_NAND_CODE) BOARDLIBS = drivers/nand/libnand.a diff --git a/board/delta/delta.c b/board/delta/delta.c index 3ffcc2a..b7671dd 100644 --- a/board/delta/delta.c +++ b/board/delta/delta.c @@ -26,9 +26,15 @@ */ #include <common.h> +#include <i2c.h> +#include <da9030.h> +#include <asm/arch/pxa-regs.h> + +DECLARE_GLOBAL_DATA_PTR; /* ------------------------------------------------------------------------- */ +static void init_DA9030(void); /* * Miscelaneous platform dependent initialisations @@ -36,8 +42,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -54,14 +58,13 @@ int board_late_init(void) { setenv("stdout", "serial"); setenv("stderr", "serial"); + init_DA9030(); return 0; } int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; @@ -73,3 +76,81 @@ int dram_init (void) return 0; } + +void i2c_init_board() +{ + CKENB |= (CKENB_4_I2C); + + /* setup I2C GPIO's */ + GPIO32 = 0x801; /* SCL = Alt. Fkt. 1 */ + GPIO33 = 0x801; /* SDA = Alt. Fkt. 1 */ +} + +/* initialize the DA9030 Power Controller */ +static void init_DA9030() +{ + uchar addr = (uchar) DA9030_I2C_ADDR, val = 0; + + CKENB |= CKENB_7_GPIO; + udelay(100); + + /* Rising Edge on EXTON to reset DA9030 */ + GPIO17 = 0x8800; /* configure GPIO17, no pullup, -down */ + GPDR0 |= (1<<17); /* GPIO17 is output */ + GSDR0 = (1<<17); + GPCR0 = (1<<17); /* drive GPIO17 low */ + GPSR0 = (1<<17); /* drive GPIO17 high */ + +#if CFG_DA9030_EXTON_DELAY + udelay((unsigned long) CFG_DA9030_EXTON_DELAY); /* wait for DA9030 */ +#endif + GPCR0 = (1<<17); /* drive GPIO17 low */ + + /* reset the watchdog and go active (0xec) */ + val = (SYS_CONTROL_A_HWRES_ENABLE | + (0x6<<4) | + SYS_CONTROL_A_WDOG_ACTION | + SYS_CONTROL_A_WATCHDOG); + if(i2c_write(addr, SYS_CONTROL_A, 1, &val, 1)) { + printf("Error accessing DA9030 via i2c.\n"); + return; + } + + i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */ + i2c_reg_write(addr, LDO2_3, 0xd1); /* LDO2 =1,9V, LDO3=3,1V */ + i2c_reg_write(addr, LDO4_5, 0xcc); /* LDO2 =1,9V, LDO3=3,1V */ + i2c_reg_write(addr, LDO6_SIMCP, 0x3e); /* LDO6=3,2V, SIMCP = 5V support */ + i2c_reg_write(addr, LDO7_8, 0xc9); /* LDO7=2,7V, LDO8=3,0V */ + i2c_reg_write(addr, LDO9_12, 0xec); /* LDO9=3,0V, LDO12=3,2V */ + i2c_reg_write(addr, BUCK, 0x0c); /* Buck=1.2V */ + i2c_reg_write(addr, REG_CONTROL_2_98, 0x7f); /* All LDO'S on 8,9,10,11,12,14 */ + i2c_reg_write(addr, LDO_10_11, 0xcc); /* LDO10=3.0V LDO11=3.0V */ + i2c_reg_write(addr, LDO_15, 0xae); /* LDO15=1.8V, dislock first 3bit */ + i2c_reg_write(addr, LDO_14_16, 0x05); /* LDO14=2.8V, LDO16=NB */ + i2c_reg_write(addr, LDO_18_19, 0x9c); /* LDO18=3.0V, LDO19=2.7V */ + i2c_reg_write(addr, LDO_17_SIMCP0, 0x2c); /* LDO17=3.0V, SIMCP=3V support */ + i2c_reg_write(addr, BUCK2_DVC1, 0x9a); /* Buck2=1.5V plus Update support of 520 MHz */ + i2c_reg_write(addr, REG_CONTROL_2_18, 0x43); /* Ball on */ + i2c_reg_write(addr, MISC_CONTROLB, 0x08); /* session valid enable */ + i2c_reg_write(addr, USBPUMP, 0xc1); /* start pump, ignore HW signals */ + + val = i2c_reg_read(addr, STATUS); + if(val & STATUS_CHDET) + printf("Charger detected, turning on LED.\n"); + else { + printf("No charger detetected.\n"); + /* undervoltage? print error and power down */ + } +} + + +#if 0 +/* reset the DA9030 watchdog */ +void hw_watchdog_reset(void) +{ + uchar addr = (uchar) DA9030_I2C_ADDR, val = 0; + val = i2c_reg_read(addr, SYS_CONTROL_A); + val |= SYS_CONTROL_A_WATCHDOG; + i2c_reg_write(addr, SYS_CONTROL_A, val); +} +#endif diff --git a/board/delta/lowlevel_init.S b/board/delta/lowlevel_init.S index 498cf7f..f059db5 100644 --- a/board/delta/lowlevel_init.S +++ b/board/delta/lowlevel_init.S @@ -1,10 +1,5 @@ /* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/lowlevel_init.S for another PXA250 setup that is - * much cleaner. + * (C) Copyright 2006 DENX Software Engineering * * See file CREDITS for list of people who contributed to this * project. @@ -31,14 +26,6 @@ DRAM_SIZE: .long CFG_DRAM_SIZE -/* wait for coprocessor write complete */ -.macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 -.endm - - .macro wait time ldr r2, =OSCR mov r3, #0 @@ -49,13 +36,9 @@ DRAM_SIZE: .long CFG_DRAM_SIZE bls 0b .endm -/* - * Memory setup - */ - .globl lowlevel_init lowlevel_init: - /* Set up GPIO pins first ----------------------------------------- */ + /* Set up GPIO pins first */ mov r10, lr /* Configure GPIO Pins 97, 98 UART1 / altern. Fkt. 1 */ @@ -73,22 +56,7 @@ lowlevel_init: bic r1, r1, #0x80000000 str r1, [r0] - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ -; wait #300 - mem_init: - -#define NEW_SDRAM_INIT 1 -#ifdef NEW_SDRAM_INIT - /* Configure ACCR Register - enable DMEMC Clock at 260 / 2 MHz */ ldr r0, =ACCR ldr r1, [r0] @@ -99,7 +67,7 @@ mem_init: /* 2. Programm MDCNFG, leaving DMCEN de-asserted */ ldr r0, =MDCNFG ldr r1, =(MDCNFG_DMAP | MDCNFG_DTYPE | MDCNFG_DTC_2 | MDCNFG_DCSE0 | MDCNFG_DRAC_13) - /* ldr r1, =0x80000403 */ + /* ldr r1, =0x80000403 */ str r1, [r0] ldr r1, [r0] /* delay until written */ @@ -140,121 +108,6 @@ mem_init: orr r1, r1, #MDCNFG_DMCEN str r1, [r0] - -#else /* NEW_SDRAM_INIT */ - - /* configure the MEMCLKCFG register */ - ldr r1, =MEMCLKCFG - ldr r2, =0x00010001 - str r2, [r1] @ WRITE - ldr r2, [r1] @ DELAY UNTIL WRITTEN - - /* set CSADRCFG[0] to data flash SRAM mode */ - ldr r1, =CSADRCFG0 - ldr r2, =0x00320809 - str r2, [r1] @ WRITE - ldr r2, [r1] @ DELAY UNTIL WRITTEN - - /* set CSADRCFG[1] to data flash SRAM mode */ - ldr r1, =CSADRCFG1 - ldr r2, =0x00320809 - str r2, [r1] @ WRITE - ldr r2, [r1] @ DELAY UNTIL WRITTEN - - /* set MSC 0 register for SRAM memory */ - ldr r1, =MSC0 - ldr r2, =0x11191119 - str r2, [r1] @ WRITE - ldr r2, [r1] @ DELAY UNTIL WRITTEN - - /* set CSADRCFG[2] to data flash SRAM mode */ - ldr r1, =CSADRCFG2 - ldr r2, =0x00320809 - str r2, [r1] @ WRITE - ldr r2, [r1] @ DELAY UNTIL WRITTEN - - /* set CSADRCFG[3] to VLIO mode */ - ldr r1, =CSADRCFG3 - ldr r2, =0x0032080B - str r2, [r1] @ WRITE - ldr r2, [r1] @ DELAY UNTIL WRITTEN - - /* set MSC 1 register for VLIO memory */ - ldr r1, =MSC1 - ldr r2, =0x123C1119 - str r2, [r1] @ WRITE - ldr r2, [r1] @ DELAY UNTIL WRITTEN - -#if 0 - /* This does not work in Zylonite. -SC */ - ldr r0, =0x15fffff0 - ldr r1, =0xb10b - str r1, [r0] - str r1, [r0, #4] -#endif - - /* Configure ACCR Register */ - ldr r0, =ACCR @ ACCR - ldr r1, =0x0180b108 - str r1, [r0] - ldr r1, [r0] - - /* Configure MDCNFG Register */ - ldr r0, =MDCNFG @ MDCNFG - ldr r1, =0x403 - str r1, [r0] - ldr r1, [r0] - - /* Perform Resistive Compensation by configuring RCOMP register */ - ldr r1, =RCOMP @ RCOMP - ldr r2, =0x000000ff - str r2, [r1] - ldr r2, [r1] - - /* Configure MDMRS Register for SDCS0 */ - ldr r1, =MDMRS @ MDMRS - ldr r2, =0x60000023 - ldr r3, [r1] - orr r2, r2, r3 - str r2, [r1] - ldr r2, [r1] - - /* Configure MDMRS Register for SDCS1 */ - ldr r1, =MDMRS @ MDMRS - ldr r2, =0xa0000023 - ldr r3, [r1] - orr r2, r2, r3 - str r2, [r1] - ldr r2, [r1] - - /* Configure MDREFR */ - ldr r1, =MDREFR @ MDREFR - ldr r2, =0x00000006 - str r2, [r1] - ldr r2, [r1] - - /* Configure EMPI */ - ldr r1, =EMPI @ EMPI - ldr r2, =0x80000000 - str r2, [r1] - ldr r2, [r1] - - /* Hardware DDR Read-Strobe Delay Calibration */ - ldr r0, =DDR_HCAL @ DDR_HCAL - ldr r1, =0x803ffc07 @ the offset is correct? -SC - str r1, [r0] - wait #5 - ldr r1, [r0] - - /* Here we assume the hardware calibration alwasy be successful. -SC */ - /* Set DMCEN bit in MDCNFG Register */ - ldr r0, =MDCNFG @ MDCNFG - ldr r1, [r0] - orr r1, r1, #0x40000000 @ enable SDRAM for Normal Access - str r1, [r0] - -#endif /* NEW_SDRAM_INIT */ - #ifndef CFG_SKIP_DRAM_SCRUB /* scrub/init SDRAM if enabled/present */ ldr r8, =CFG_DRAM_BASE /* base address of SDRAM (CFG_DRAM_BASE) */ @@ -290,96 +143,4 @@ mem_init: mcr p14,0,r0,c10,c0,0 /* dcsr */ endlowlevel_init: - mov pc, lr - - -/* -@******************************************************************************** -@ DDR calibration -@ -@ This function is used to calibrate DQS delay lines. -@ Monahans supports three ways to do it. One is software -@ calibration. Two is hardware calibration. Three is hybrid -@ calibration. -@ -@ TBD -@ -SC -ddr_calibration: - - @ Case 1: Write the correct delay value once - @ Configure DDR_SCAL Register - ldr r0, =DDR_SCAL @ DDR_SCAL -q ldr r1, =0xaf2f2f2f - str r1, [r0] - ldr r1, [r0] -*/ -/* @ Case 2: Software Calibration - @ Write test pattern to memory - ldr r5, =0x0faf0faf @ Data Pattern - ldr r4, =0xa0000000 @ DDR ram - str r5, [r4] - - mov r1, =0x0 @ delay count - mov r6, =0x0 - mov r7, =0x0 -ddr_loop1: - add r1, r1, =0x1 - cmp r1, =0xf - ble end_loop - mov r3, r1 - mov r0, r1, lsl #30 - orr r3, r3, r0 - mov r0, r1, lsl #22 - orr r3, r3, r0 - mov r0, r1, lsl #14 - orr r3, r3, r0 - orr r3, r3, =0x80000000 - ldr r2, =DDR_SCAL - str r3, [r2] - - ldr r2, [r4] - cmp r2, r5 - bne ddr_loop1 - mov r6, r1 -ddr_loop2: - add r1, r1, =0x1 - cmp r1, =0xf - ble end_loop - mov r3, r1 - mov r0, r1, lsl #30 - orr r3, r3, r0 - mov r0, r1, lsl #22 - orr r3, r3, r0 - mov r0, r1, lsl #14 - orr r3, r3, r0 - orr r3, r3, =0x80000000 - ldr r2, =DDR_SCAL - str r3, [r2] - - ldr r2, [r4] - cmp r2, r5 - be ddr_loop2 - mov r7, r2 - - add r3, r6, r7 - lsr r3, r3, =0x1 - mov r0, r1, lsl #30 - orr r3, r3, r0 - mov r0, r1, lsl #22 - orr r3, r3, r0 - mov r0, r1, lsl #14 - orr r3, r3, r0 - orr r3, r3, =0x80000000 - ldr r2, =DDR_SCAL - -end_loop: - - @ Case 3: Hardware Calibratoin - ldr r0, =DDR_HCAL @ DDR_HCAL - ldr r1, =0x803ffc07 @ the offset is correct? -SC - str r1, [r0] - wait #5 - ldr r1, [r0] - mov pc, lr -*/ diff --git a/board/delta/nand.c b/board/delta/nand.c index c4df6e5..5d2cd65 100644 --- a/board/delta/nand.c +++ b/board/delta/nand.c @@ -293,11 +293,6 @@ static int dfc_wait(struct mtd_info *mtd, struct nand_chip *this, int state) { unsigned long ndsr=0, event=0; - /* mk@tbd set appropriate timeouts */ - /* if (state == FL_ERASING) */ - /* timeo = CFG_HZ * 400; */ - /* else */ - /* timeo = CFG_HZ * 20; */ if(state == FL_WRITING) { event = NDSR_CS0_CMDD | NDSR_CS0_BBD; } else if(state == FL_ERASING) { @@ -563,13 +558,12 @@ void board_nand_init(struct nand_chip *nand) /* wait 10 us due to cmd buffer clear reset */ - /* wait(10); */ + /* wait(10); */ nand->hwcontrol = dfc_hwcontrol; -/* nand->dev_ready = dfc_device_ready; */ +/* nand->dev_ready = dfc_device_ready; */ nand->eccmode = NAND_ECC_SOFT; - nand->chip_delay = NAND_DELAY_US; nand->options = NAND_BUSWIDTH_16; nand->waitfunc = dfc_wait; nand->read_byte = dfc_read_byte; diff --git a/board/dnp1110/dnp1110.c b/board/dnp1110/dnp1110.c index 24c3e00..ab8e7be 100644 --- a/board/dnp1110/dnp1110.c +++ b/board/dnp1110/dnp1110.c @@ -24,8 +24,8 @@ #include <common.h> #include <SA-1100.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -33,25 +33,21 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ /* arch number of DNP1110-Board */ gd->bd->bi_arch_number = MACH_TYPE_DNP1110; - /* flash vpp on */ - PPDR |= 0x80; /* assumes LCD controller is off */ - PPSR |= 0x80; + /* flash vpp on */ + PPDR |= 0x80; /* assumes LCD controller is off */ + PPSR |= 0x80; return 0; } int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c index fc48ed5..555475e 100644 --- a/board/eltec/bab7xx/bab7xx.c +++ b/board/eltec/bab7xx/bab7xx.c @@ -31,6 +31,8 @@ #include <ns87308.h> #include <video_fb.h> +DECLARE_GLOBAL_DATA_PTR; + /*---------------------------------------------------------------------------*/ /* * Get Bus clock frequency @@ -169,8 +171,6 @@ long int initdram (int board_type) void after_reloc (ulong dest_addr) { - DECLARE_GLOBAL_DATA_PTR; - /* * Jump to the main U-Boot board init code */ diff --git a/board/eltec/elppc/elppc.c b/board/eltec/elppc/elppc.c index a9dbeb2..108adb1 100644 --- a/board/eltec/elppc/elppc.c +++ b/board/eltec/elppc/elppc.c @@ -26,6 +26,8 @@ #include <mpc106.h> #include <video_fb.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ int checkboard (void) @@ -137,8 +139,6 @@ void watchdog_reset (void) void after_reloc (ulong dest_addr) { - DECLARE_GLOBAL_DATA_PTR; - /* * Jump to the main U-Boot board init code */ diff --git a/board/ep7312/ep7312.c b/board/ep7312/ep7312.c index 11eab23..6968a5d 100644 --- a/board/ep7312/ep7312.c +++ b/board/ep7312/ep7312.c @@ -25,8 +25,7 @@ #include <common.h> #include <clps7111.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -34,8 +33,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Activate LED flasher */ IO_LEDFLSH = 0x40; @@ -50,8 +47,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/esd/apc405/apc405.c b/board/esd/apc405/apc405.c index 4b2b07a..078df00 100644 --- a/board/esd/apc405/apc405.c +++ b/board/esd/apc405/apc405.c @@ -26,7 +26,7 @@ #include <command.h> #include <malloc.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; #if 0 #define FPGA_DEBUG @@ -166,8 +166,6 @@ int misc_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile unsigned short *fpga_mode = (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL); volatile unsigned short *fpga_ctrl2 = @@ -301,8 +299,6 @@ int misc_init_r (void) int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned char str[64]; int i = getenv_r ("serial#", str, sizeof(str)); diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c index 3aac3c6..dfead33 100644 --- a/board/esd/ar405/ar405.c +++ b/board/esd/ar405/ar405.c @@ -26,6 +26,8 @@ #include <asm/processor.h> #include <command.h> +DECLARE_GLOBAL_DATA_PTR; + /*cmd_boot.c*/ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); extern void lxt971_no_sleep(void); @@ -53,8 +55,6 @@ const unsigned char fpgadata_xl30[] = { int board_early_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; - int index, len, i; int status; @@ -151,8 +151,6 @@ int board_early_init_f (void) int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - int index; int len; char str[64]; diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c index 2ced6cb..055a397 100644 --- a/board/esd/canbt/canbt.c +++ b/board/esd/canbt/canbt.c @@ -26,6 +26,7 @@ #include <asm/processor.h> #include <command.h> +DECLARE_GLOBAL_DATA_PTR; /*cmd_boot.c*/ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); @@ -50,8 +51,6 @@ const unsigned char fpgadata[] = { int board_early_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long cntrl0Reg; int index, len, i; int status; diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c index e283a92..cb04710 100644 --- a/board/esd/cms700/cms700.c +++ b/board/esd/cms700/cms700.c @@ -26,10 +26,10 @@ #include <command.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; extern void lxt971_no_sleep(void); - /* fpga configuration data - not compressed, generated by bin2c */ const unsigned char fpgadata[] = { @@ -87,8 +87,6 @@ int misc_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c index 1a27ca0..36bf329 100644 --- a/board/esd/cpci2dp/cpci2dp.c +++ b/board/esd/cpci2dp/cpci2dp.c @@ -26,6 +26,8 @@ #include <command.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; + int board_early_init_f (void) { unsigned long cntrl0Reg; @@ -74,7 +76,6 @@ int misc_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; unsigned long cntrl0Reg; /* adjust flash start and offset */ diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index 2ab9673..f803610 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -27,7 +27,8 @@ #include <malloc.h> #include <net.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; + extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /*cmd_boot.c*/ #if 0 #define FPGA_DEBUG @@ -100,8 +101,6 @@ int board_early_init_f (void) #endif #ifdef FPGA_DEBUG - DECLARE_GLOBAL_DATA_PTR; - /* set up serial port with default baudrate */ (void) get_clocks (); gd->baudrate = CONFIG_BAUDRATE; @@ -126,8 +125,6 @@ int board_early_init_f (void) if (status != 0) { /* booting FPGA failed */ #ifndef FPGA_DEBUG - DECLARE_GLOBAL_DATA_PTR; - /* set up serial port with default baudrate */ (void) get_clocks (); gd->baudrate = CONFIG_BAUDRATE; @@ -268,7 +265,6 @@ int misc_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; unsigned long cntrl0Reg; /* adjust flash start and offset */ @@ -707,8 +703,6 @@ U_BOOT_CMD( */ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - DECLARE_GLOBAL_DATA_PTR; - bd_t *bd = gd->bd; char *buf; ulong crc; diff --git a/board/esd/cpci750/mpsc.c b/board/esd/cpci750/mpsc.c index 52398b2..25c10e0 100644 --- a/board/esd/cpci750/mpsc.c +++ b/board/esd/cpci750/mpsc.c @@ -42,6 +42,8 @@ #include "../../Marvell/include/memory.h" +DECLARE_GLOBAL_DATA_PTR; + /* Define this if you wish to use the MPSC as a register based UART. * This will force the serial port to not use the SDMA engine at all. */ @@ -157,7 +159,6 @@ char mpsc_getchar_debug (void) * global variables [josh] */ int mpsc_putchar_early (char ch) { - DECLARE_GLOBAL_DATA_PTR; int mpsc = CHANNEL; int temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); @@ -510,7 +511,6 @@ void mpsc_init2 (void) int galbrg_set_baudrate (int channel, int rate) { - DECLARE_GLOBAL_DATA_PTR; int clock; galbrg_disable (channel); /*ok */ diff --git a/board/esd/cpci750/mv_eth.c b/board/esd/cpci750/mv_eth.c index be176dc..bc84ef0 100644 --- a/board/esd/cpci750/mv_eth.c +++ b/board/esd/cpci750/mv_eth.c @@ -733,6 +733,7 @@ int mv64360_eth_xmit (struct eth_device *dev, volatile void *dataPtr, pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */ pkt_info.byte_cnt = dataSize; pkt_info.buf_ptr = (unsigned int) dataPtr; + pkt_info.return_info = 0; status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info); if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) { diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c index db545ef..6bdfc1d 100644 --- a/board/esd/cpci750/sdram_init.c +++ b/board/esd/cpci750/sdram_init.c @@ -45,6 +45,7 @@ #include "64360.h" #include "mv_regs.h" +DECLARE_GLOBAL_DATA_PTR; #undef DEBUG /* #define DEBUG */ @@ -250,8 +251,6 @@ NSto10PS(unsigned char spd_byte) /* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long spd_checksum; uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR; diff --git a/board/esd/cpci750/serial.c b/board/esd/cpci750/serial.c index 44de052..ba32ac1 100644 --- a/board/esd/cpci750/serial.c +++ b/board/esd/cpci750/serial.c @@ -38,13 +38,12 @@ #include "../../Marvell/include/memory.h" #include "serial.h" - #include "mpsc.h" +DECLARE_GLOBAL_DATA_PTR; + int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - mpsc_init (gd->baudrate); return (0); @@ -70,8 +69,6 @@ int serial_tstc (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate); } diff --git a/board/esd/cpciiser4/cpciiser4.c b/board/esd/cpciiser4/cpciiser4.c index 7bf7bb5..fcb8cbb 100644 --- a/board/esd/cpciiser4/cpciiser4.c +++ b/board/esd/cpciiser4/cpciiser4.c @@ -26,6 +26,8 @@ #include <asm/processor.h> #include <command.h> +DECLARE_GLOBAL_DATA_PTR; + /*cmd_boot.c*/ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); @@ -55,8 +57,6 @@ const unsigned char fpgadata[] = { int board_early_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; - int index, len, i; volatile unsigned char dummy; int status; diff --git a/board/esd/dp405/dp405.c b/board/esd/dp405/dp405.c index fd51f7f..240ab78 100644 --- a/board/esd/dp405/dp405.c +++ b/board/esd/dp405/dp405.c @@ -26,6 +26,7 @@ #include <command.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; /* fpga configuration data - not compressed, generated by bin2c */ const unsigned char fpgadata[] = @@ -84,8 +85,6 @@ int misc_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c index 26e8341..a019ce4 100644 --- a/board/esd/du405/du405.c +++ b/board/esd/du405/du405.c @@ -28,6 +28,8 @@ #include <405gp_i2c.h> #include <command.h> +DECLARE_GLOBAL_DATA_PTR; + /*cmd_boot.c*/ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); @@ -55,8 +57,6 @@ const unsigned char fpgadata[] = { int board_early_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; - int index, len, i; int status; diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index 99fd556..ea344c0 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -34,6 +34,8 @@ #include <pci.h> #include <sm501.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_VIDEO_SM501 #define SWAP32(x) ((((x) & 0x000000ff) << 24) | (((x) & 0x0000ff00) << 8)|\ @@ -358,8 +360,6 @@ int board_early_init_f (void) int cf_enable(void) { - DECLARE_GLOBAL_DATA_PTR; - int i; volatile unsigned short *fpga_ctrl = @@ -391,8 +391,6 @@ int cf_enable(void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile unsigned short *fpga_ctrl = (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL); volatile unsigned short *lcd_contrast = @@ -628,8 +626,6 @@ int misc_init_r (void) int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char str[64]; int i = getenv_r ("serial#", str, sizeof(str)); @@ -673,8 +669,6 @@ long int initdram (int board_type) #ifdef CONFIG_IDE_RESET void ide_set_reset(int on) { - DECLARE_GLOBAL_DATA_PTR; - volatile unsigned short *fpga_mode = (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL); volatile unsigned short *fpga_status = @@ -788,8 +782,6 @@ U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, */ void video_get_info_str (int line_number, char *info) { - DECLARE_GLOBAL_DATA_PTR; - char str[64]; char str2[64]; int i = getenv_r("serial#", str2, sizeof(str)); diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c index 0c6771f..1e0accb 100644 --- a/board/esd/hub405/hub405.c +++ b/board/esd/hub405/hub405.c @@ -26,10 +26,10 @@ #include <command.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; extern void lxt971_no_sleep(void); - int board_revision(void) { unsigned long osrl_reg; @@ -110,8 +110,6 @@ int misc_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4); volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4); volatile unsigned char *duart2_mcr = (unsigned char *)((ulong)DUART2_BA + 4); @@ -208,8 +206,6 @@ int misc_init_r (void) */ int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char str[64]; int i = getenv_r ("serial#", str, sizeof(str)); diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c index 4be4d7e..e5d2273 100644 --- a/board/esd/pci405/pci405.c +++ b/board/esd/pci405/pci405.c @@ -30,6 +30,7 @@ #include "pci405.h" +DECLARE_GLOBAL_DATA_PTR; /* Prototypes */ int gunzip(void *, int, unsigned char *, unsigned long *); @@ -111,8 +112,6 @@ int board_revision(void) unsigned long fpga_done_state(void) { - DECLARE_GLOBAL_DATA_PTR; - if (gd->board_type < 2) { return FPGA_DONE_STATE_V11; } else { @@ -123,8 +122,6 @@ unsigned long fpga_done_state(void) unsigned long fpga_init_state(void) { - DECLARE_GLOBAL_DATA_PTR; - if (gd->board_type < 2) { return FPGA_INIT_STATE_V11; } else { @@ -320,8 +317,6 @@ int misc_init_r (void) int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char str[64]; int i = getenv_r ("serial#", str, sizeof(str)); diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c index f9e4d43..7499671 100644 --- a/board/esd/pmc405/pmc405.c +++ b/board/esd/pmc405/pmc405.c @@ -29,10 +29,10 @@ #include <command.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; extern void lxt971_no_sleep(void); - /* fpga configuration data - not compressed, generated by bin2c */ const unsigned char fpgadata[] = { @@ -100,8 +100,6 @@ int board_early_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; diff --git a/board/esd/vom405/vom405.c b/board/esd/vom405/vom405.c index bc5fa7c..8be552e 100644 --- a/board/esd/vom405/vom405.c +++ b/board/esd/vom405/vom405.c @@ -26,10 +26,10 @@ #include <command.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; extern void lxt971_no_sleep(void); - /* fpga configuration data - not compressed, generated by bin2c */ const unsigned char fpgadata[] = { @@ -81,8 +81,6 @@ int board_early_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; diff --git a/board/etin/debris/debris.c b/board/etin/debris/debris.c index 93c502c..08ed635 100644 --- a/board/etin/debris/debris.c +++ b/board/etin/debris/debris.c @@ -26,6 +26,8 @@ #include <pci.h> #include <i2c.h> +DECLARE_GLOBAL_DATA_PTR; + int checkboard (void) { /*TODO: Check processor type */ @@ -170,8 +172,6 @@ void nvram_write(long dest, const void *src, size_t count) int misc_init_r(void) { - DECLARE_GLOBAL_DATA_PTR; - /* Write ethernet addr in NVRAM for VxWorks */ nvram_write(CFG_ENV_ADDR + CFG_NVRAM_VXWORKS_OFFS, (char*)&gd->bd->bi_enetaddr[0], 6); diff --git a/board/etx094/etx094.c b/board/etx094/etx094.c index dba3c11..eb58b5d 100644 --- a/board/etx094/etx094.c +++ b/board/etx094/etx094.c @@ -24,6 +24,8 @@ #include <common.h> #include <mpc8xx.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ static long int dram_size (long int, long int *, long int); @@ -90,8 +92,6 @@ const uint sdram_table[] = { int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char *s = getenv ("serial#"); char *e; diff --git a/board/evb4510/evb4510.c b/board/evb4510/evb4510.c index 0008e5a..13abbb7 100644 --- a/board/evb4510/evb4510.c +++ b/board/evb4510/evb4510.c @@ -25,6 +25,8 @@ #include <asm/hardware.h> #include <command.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_EVB4510 /* ------------------------------------------------------------------------- */ @@ -35,8 +37,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - icache_enable(); /* address for the kernel command line */ @@ -52,7 +52,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; #if CONFIG_NR_DRAM_BANKS == 2 diff --git a/board/evb64260/evb64260.c b/board/evb64260/evb64260.c index 6a9d164..ab59941 100644 --- a/board/evb64260/evb64260.c +++ b/board/evb64260/evb64260.c @@ -37,6 +37,9 @@ #include "mpsc.h" #include "i2c.h" #include "64260.h" + +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_ZUMA_V2 extern void zuma_mbox_init(void); #endif @@ -323,8 +326,6 @@ int misc_init_r (void) void after_reloc(ulong dest_addr) { - DECLARE_GLOBAL_DATA_PTR; - /* check to see if we booted from the sram. If so, move things * back to the way they should be. (we're running from main * memory at this point now */ diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c index ee623ca..98ac7f6 100644 --- a/board/evb64260/mpsc.c +++ b/board/evb64260/mpsc.c @@ -32,6 +32,8 @@ #include <malloc.h> #include "mpsc.h" +DECLARE_GLOBAL_DATA_PTR; + int (*mpsc_putchar)(char ch) = mpsc_putchar_early; static volatile unsigned int *rx_desc_base=NULL; @@ -115,7 +117,6 @@ struct _tag_mirror_hack { int mpsc_putchar_early(char ch) { - DECLARE_GLOBAL_DATA_PTR; int mpsc=CHANNEL; int temp=GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP); galmpsc_set_tcschar(mpsc,ch); @@ -177,79 +178,82 @@ mpsc_putchar_sdma(char ch) return 0; } -char -mpsc_getchar(void) +char mpsc_getchar (void) { - DECLARE_GLOBAL_DATA_PTR; - static unsigned int done = 0; - volatile char ch; - unsigned int len=0, idx=0, temp; - - volatile unsigned int *p; - - - do { - p=&rx_desc_base[rx_desc_index*8]; - - INVALIDATE_DCACHE(&p[0], &p[1]); - /* Wait for character */ - while (p[1] & DESC_OWNER){ - udelay(100); - INVALIDATE_DCACHE(&p[0], &p[1]); - } - - /* Handle error case */ - if (p[1] & (1<<15)) { - printf("oops, error: %08x\n", p[1]); - - temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,CHANNEL,GALMPSC_REG_GAP); - temp |= (1 << 23); - GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2, CHANNEL,GALMPSC_REG_GAP, temp); - - /* Can't poll on abort bit, so we just wait. */ - udelay(100); + static unsigned int done = 0; + volatile char ch; + unsigned int len = 0, idx = 0, temp; - galsdma_enable_rx(); - } - - /* Number of bytes left in this descriptor */ - len = p[0] & 0xffff; - - if (len) { - /* Where to look */ - idx = 5; - if (done > 3) idx = 4; - if (done > 7) idx = 7; - if (done > 11) idx = 6; - - INVALIDATE_DCACHE(&p[idx], &p[idx+1]); - ch = p[idx] & 0xff; - done++; - } + volatile unsigned int *p; - if (done < len) { - /* this descriptor has more bytes still - * shift down the char we just read, and leave the - * buffer in place for the next time around - */ - p[idx] = p[idx] >> 8; - FLUSH_DCACHE(&p[idx], &p[idx+1]); - } - if (done == len) { - /* nothing left in this descriptor. - * go to next one - */ - p[1] = DESC_OWNER | DESC_FIRST | DESC_LAST; - p[0] = 0x00100000; - FLUSH_DCACHE(&p[0], &p[1]); - /* Next descriptor */ - rx_desc_index = (rx_desc_index + 1) % RX_DESC; - done = 0; - } - } while (len==0); /* galileo bug.. len might be zero */ - - return ch; + do { + p = &rx_desc_base[rx_desc_index * 8]; + + INVALIDATE_DCACHE (&p[0], &p[1]); + /* Wait for character */ + while (p[1] & DESC_OWNER) { + udelay (100); + INVALIDATE_DCACHE (&p[0], &p[1]); + } + + /* Handle error case */ + if (p[1] & (1 << 15)) { + printf ("oops, error: %08x\n", p[1]); + + temp = GTREGREAD_MIRROR (GALMPSC_CHANNELREG_2, + CHANNEL, GALMPSC_REG_GAP); + temp |= (1 << 23); + GT_REG_WRITE_MIRROR (GALMPSC_CHANNELREG_2, CHANNEL, + GALMPSC_REG_GAP, temp); + + /* Can't poll on abort bit, so we just wait. */ + udelay (100); + + galsdma_enable_rx (); + } + + /* Number of bytes left in this descriptor */ + len = p[0] & 0xffff; + + if (len) { + /* Where to look */ + idx = 5; + if (done > 3) + idx = 4; + if (done > 7) + idx = 7; + if (done > 11) + idx = 6; + + INVALIDATE_DCACHE (&p[idx], &p[idx + 1]); + ch = p[idx] & 0xff; + done++; + } + + if (done < len) { + /* this descriptor has more bytes still + * shift down the char we just read, and leave the + * buffer in place for the next time around + */ + p[idx] = p[idx] >> 8; + FLUSH_DCACHE (&p[idx], &p[idx + 1]); + } + + if (done == len) { + /* nothing left in this descriptor. + * go to next one + */ + p[1] = DESC_OWNER | DESC_FIRST | DESC_LAST; + p[0] = 0x00100000; + FLUSH_DCACHE (&p[0], &p[1]); + /* Next descriptor */ + rx_desc_index = (rx_desc_index + 1) % RX_DESC; + done = 0; + } + } while (len == 0); /* galileo bug.. len might be zero */ + + return ch; } int @@ -266,8 +270,6 @@ mpsc_test_char(void) int mpsc_init(int baud) { - DECLARE_GLOBAL_DATA_PTR; - memset(MIRROR_HACK, 0, sizeof(struct _tag_mirror_hack)); MIRROR_HACK->GALMPSC_ROUTING_REGISTER_M=0x3fffffff; @@ -382,7 +384,6 @@ mpsc_init2(void) int galbrg_set_baudrate(int channel, int rate) { - DECLARE_GLOBAL_DATA_PTR; int clock; galbrg_disable(channel); @@ -410,7 +411,6 @@ galbrg_set_baudrate(int channel, int rate) static int galbrg_set_CDV(int channel, int value) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP); @@ -424,7 +424,6 @@ galbrg_set_CDV(int channel, int value) static int galbrg_enable(int channel) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP); @@ -437,7 +436,6 @@ galbrg_enable(int channel) static int galbrg_disable(int channel) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP); @@ -450,7 +448,6 @@ galbrg_disable(int channel) static int galbrg_set_clksrc(int channel, int value) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG,channel, GALBRG_REG_GAP); @@ -583,7 +580,6 @@ galsdma_set_burstsize(int channel, unsigned int value) static int galmpsc_connect(int channel, int connect) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR_G(GALMPSC_ROUTING_REGISTER); @@ -629,7 +625,6 @@ galmpsc_route_serial(int channel, int connect) static int galmpsc_route_rx_clock(int channel, int brg) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR_G(GALMPSC_RxC_ROUTE); @@ -647,7 +642,6 @@ galmpsc_route_rx_clock(int channel, int brg) static int galmpsc_route_tx_clock(int channel, int brg) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR_G(GALMPSC_TxC_ROUTE); @@ -688,7 +682,6 @@ galmpsc_write_config_regs(int mpsc, int mode) static int galmpsc_config_channel_regs(int mpsc) { - DECLARE_GLOBAL_DATA_PTR; GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP, 0); GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP, 0); GT_REG_WRITE(GALMPSC_CHANNELREG_3+(mpsc*GALMPSC_REG_GAP), 1); @@ -709,7 +702,6 @@ galmpsc_config_channel_regs(int mpsc) static int galmpsc_set_brkcnt(int mpsc, int value) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP); @@ -723,7 +715,6 @@ galmpsc_set_brkcnt(int mpsc, int value) static int galmpsc_set_tcschar(int mpsc, int value) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP); @@ -737,7 +728,6 @@ galmpsc_set_tcschar(int mpsc, int value) static int galmpsc_set_char_length(int mpsc, int value) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP); @@ -751,7 +741,6 @@ galmpsc_set_char_length(int mpsc, int value) static int galmpsc_set_stop_bit_length(int mpsc, int value) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP); @@ -764,7 +753,6 @@ galmpsc_set_stop_bit_length(int mpsc, int value) static int galmpsc_set_parity(int mpsc, int value) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP); @@ -784,7 +772,6 @@ galmpsc_set_parity(int mpsc, int value) static int galmpsc_enter_hunt(int mpsc) { - DECLARE_GLOBAL_DATA_PTR; int temp; temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP); @@ -802,7 +789,6 @@ galmpsc_enter_hunt(int mpsc) static int galmpsc_shutdown(int mpsc) { - DECLARE_GLOBAL_DATA_PTR; #if 0 unsigned int temp; diff --git a/board/evb64260/sdram_init.c b/board/evb64260/sdram_init.c index 8d63c6f..fae6d10 100644 --- a/board/evb64260/sdram_init.c +++ b/board/evb64260/sdram_init.c @@ -35,6 +35,8 @@ #include "i2c.h" #include "64260.h" +DECLARE_GLOBAL_DATA_PTR; + /* #define DEBUG */ #define MAP_PCI @@ -199,7 +201,6 @@ static int check_dimm (uchar slot, sdram_info_t * info) * the array which is passed in with the relevant information */ static int check_dimm (uchar slot, sdram_info_t * info) { - DECLARE_GLOBAL_DATA_PTR; uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR; int ret; uchar rows, cols, sdram_banks, supp_cal, width, cal_val; diff --git a/board/evb64260/serial.c b/board/evb64260/serial.c index d9c7a15..191445c 100644 --- a/board/evb64260/serial.c +++ b/board/evb64260/serial.c @@ -39,6 +39,8 @@ #include "mpsc.h" +DECLARE_GLOBAL_DATA_PTR; + #if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2) const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1, (NS16550_t) CFG_NS16550_COM2 }; @@ -48,8 +50,6 @@ const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1, int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - #if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2) int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; #endif @@ -90,8 +90,6 @@ serial_tstc(void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - galbrg_set_baudrate(CONFIG_MPSC_PORT, gd->baudrate); } @@ -99,8 +97,6 @@ serial_setbrg (void) int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; #ifdef CFG_INIT_CHAN1 @@ -137,8 +133,6 @@ serial_tstc(void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; #ifdef CFG_INIT_CHAN1 diff --git a/board/ezkit533/ezkit533.c b/board/ezkit533/ezkit533.c index f8ee900..8d6c8de 100644 --- a/board/ezkit533/ezkit533.c +++ b/board/ezkit533/ezkit533.c @@ -30,6 +30,8 @@ #include "psd4256.h" #endif +DECLARE_GLOBAL_DATA_PTR; + int checkboard(void) { printf("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28); @@ -41,7 +43,6 @@ int checkboard(void) long int initdram(int board_type) { - DECLARE_GLOBAL_DATA_PTR; #ifdef DEBUG int brate; char *tmp = getenv("baudrate"); diff --git a/board/gcplus/gcplus.c b/board/gcplus/gcplus.c index 261e894..829b597 100644 --- a/board/gcplus/gcplus.c +++ b/board/gcplus/gcplus.c @@ -26,7 +26,8 @@ #include <common.h> #include <SA-1100.h> -/* ------------------------------------------------------------------------- */ + +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -35,8 +36,6 @@ int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_arch_number = MACH_TYPE_GRAPHICSCLIENT; gd->bd->bi_boot_params = 0xc000003c; /* Weird address? */ @@ -62,8 +61,6 @@ board_init(void) int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/gen860t/fpga.c b/board/gen860t/fpga.c index 37788d5..2ba7e0e 100644 --- a/board/gen860t/fpga.c +++ b/board/gen860t/fpga.c @@ -32,6 +32,8 @@ #include <command.h> #include "fpga.h" +DECLARE_GLOBAL_DATA_PTR; + #if (CONFIG_FPGA) #if 0 @@ -189,8 +191,6 @@ void fpga_selectmap_init (void) */ int gen860t_init_fpga (void) { - DECLARE_GLOBAL_DATA_PTR; - int i; PRINTF ("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n", __FUNCTION__, __LINE__, gd->reloc_off); diff --git a/board/gen860t/gen860t.c b/board/gen860t/gen860t.c index b7a1b56..eb73221 100644 --- a/board/gen860t/gen860t.c +++ b/board/gen860t/gen860t.c @@ -30,6 +30,8 @@ #include "fpga.h" #include "ioport.h" +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_STATUS_LED #include <status_led.h> #endif @@ -126,8 +128,6 @@ const uint selectmap_upm_table[] = { */ int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char *s; char buf[64]; int i; @@ -305,5 +305,3 @@ int post_hotkeys_pressed (void) return 0; /* No hotkeys supported */ } #endif - -/* vim: set ts=4 sw=4 tw=78 : */ diff --git a/board/hermes/hermes.c b/board/hermes/hermes.c index e95d9ee..a523db1 100644 --- a/board/hermes/hermes.c +++ b/board/hermes/hermes.c @@ -32,6 +32,8 @@ # define SHOW_BOOT_PROGRESS(arg) #endif +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ static long int dram_size (long int, long int *, long int); @@ -105,8 +107,6 @@ const uint sdram_table[] = { int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char *s = getenv ("serial#"); char *e; diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c index 0596fa4..6868f26 100644 --- a/board/hymod/bsp.c +++ b/board/hymod/bsp.c @@ -28,6 +28,8 @@ #include <net.h> #include <asm/iopin_8260.h> +DECLARE_GLOBAL_DATA_PTR; + /*----------------------------------------------------------------------- * Board Special Commands: FPGA load/store, EEPROM erase */ @@ -75,8 +77,6 @@ int fpga_load (int mezz, uchar *addr, ulong size) { - DECLARE_GLOBAL_DATA_PTR; - hymod_conf_t *cp = &gd->bd->bi_hymod_conf; xlx_info_t *fp; xlx_iopins_t *fpgaio; diff --git a/board/hymod/env.c b/board/hymod/env.c index f9e1421..062553b 100644 --- a/board/hymod/env.c +++ b/board/hymod/env.c @@ -23,6 +23,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* imports from fetch.c */ extern int fetch_and_parse (char *, ulong, int (*)(uchar *, uchar *)); @@ -32,8 +34,6 @@ static char *def_global_env_path = "/hymod/global_env"; static int env_callback (uchar *name, uchar *value) { - DECLARE_GLOBAL_DATA_PTR; - hymod_conf_t *cp = &gd->bd->bi_hymod_conf; char ov[CFG_CBSIZE], nv[CFG_CBSIZE], *p, *q, *nn, c, *curver, *newver; int override = 1, append = 0, remove = 0, nnl, ovl, nvl; diff --git a/board/hymod/hymod.c b/board/hymod/hymod.c index dea0a70..5e98e9e 100644 --- a/board/hymod/hymod.c +++ b/board/hymod/hymod.c @@ -30,6 +30,8 @@ #include <i2c.h> #include <asm/iopin_8260.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* imports from eeprom.c */ @@ -424,8 +426,6 @@ initdram (int board_type) int last_stage_init (void) { - DECLARE_GLOBAL_DATA_PTR; - hymod_conf_t *cp = &gd->bd->bi_hymod_conf; int rc; diff --git a/board/ids8247/ids8247.c b/board/ids8247/ids8247.c index 081ef65..7b9a83d 100644 --- a/board/ids8247/ids8247.c +++ b/board/ids8247/ids8247.c @@ -25,6 +25,8 @@ #include <ioports.h> #include <mpc8260.h> +DECLARE_GLOBAL_DATA_PTR; + /* * I/O Port configuration table * @@ -295,8 +297,6 @@ long int initdram (int board_type) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_flashstart = 0xff800000; } diff --git a/board/impa7/impa7.c b/board/impa7/impa7.c index e496923..3230dd4 100644 --- a/board/impa7/impa7.c +++ b/board/impa7/impa7.c @@ -25,6 +25,8 @@ #include <common.h> #include <clps7111.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ @@ -34,8 +36,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Activate LED flasher */ IO_LEDFLSH = 0x40; @@ -50,8 +50,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c index ae5402e..7f8f47c 100644 --- a/board/innokom/innokom.c +++ b/board/innokom/innokom.c @@ -27,6 +27,8 @@ #include <asm/arch/pxa-regs.h> #include <asm/mach-types.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_SHOW_BOOT_PROGRESS # define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) #else @@ -95,8 +97,6 @@ int misc_init_r(void) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -116,8 +116,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/integratorap/integratorap.c b/board/integratorap/integratorap.c index d4f61d6..e659907 100644 --- a/board/integratorap/integratorap.c +++ b/board/integratorap/integratorap.c @@ -39,6 +39,8 @@ #include <pci.h> #endif +DECLARE_GLOBAL_DATA_PTR; + void flash__init (void); void ether__init (void); void peripheral_power_enable (void); @@ -65,8 +67,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of Integrator Board */ gd->bd->bi_arch_number = MACH_TYPE_INTEGRATOR; @@ -480,8 +480,6 @@ void ether__init (void) ******************************/ int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/integratorcp/integratorcp.c b/board/integratorcp/integratorcp.c index 216876b..d6d6e13 100644 --- a/board/integratorcp/integratorcp.c +++ b/board/integratorcp/integratorcp.c @@ -35,6 +35,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + void flash__init (void); void ether__init (void); void peripheral_power_enable (void); @@ -54,8 +56,6 @@ void show_boot_progress(int progress) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of Integrator Board */ gd->bd->bi_arch_number = MACH_TYPE_CINTEGRATOR; @@ -105,8 +105,6 @@ void ether__init (void) ******************************/ int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/ixdp425/ixdp425.c b/board/ixdp425/ixdp425.c index c04626a..aa96591 100644 --- a/board/ixdp425/ixdp425.c +++ b/board/ixdp425/ixdp425.c @@ -28,11 +28,7 @@ #include <asm/arch/ixp425.h> #include <common.h> -/* ------------------------------------------------------------------------- */ - - -/* local prototypes */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -49,8 +45,6 @@ int board_post_init (void) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of IXDP */ gd->bd->bi_arch_number = MACH_TYPE_IXDP425; @@ -64,8 +58,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/kb9202/kb9202.c b/board/kb9202/kb9202.c index 4a7cf77..ec51dca 100644 --- a/board/kb9202/kb9202.c +++ b/board/kb9202/kb9202.c @@ -31,7 +31,8 @@ #include <at91rm9200_net.h> #include <lxt971a.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; + /* * Miscelaneous platform dependent initialisations */ @@ -42,8 +43,6 @@ void lowlevel_init(void) { int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Enable Ctrlc */ console_init_f (); @@ -60,8 +59,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM; gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; return 0; diff --git a/board/kup/kup4k/kup4k.c b/board/kup/kup4k/kup4k.c index e621c43..4e377a1 100644 --- a/board/kup/kup4k/kup4k.c +++ b/board/kup/kup4k/kup4k.c @@ -29,6 +29,8 @@ #include "s1d13706.h" #endif +DECLARE_GLOBAL_DATA_PTR; + #undef DEBUG #ifdef DEBUG # define debugk(fmt,args...) printf(fmt ,##args) @@ -44,10 +46,6 @@ typedef struct { /* ------------------------------------------------------------------------- */ -#if 0 -static long int dram_size (long int, long int *, long int); -#endif - #ifdef CONFIG_KUP4K_LOGO void lcd_logo(bd_t *bd); #endif @@ -235,62 +233,8 @@ long int initdram (int board_type) /* ------------------------------------------------------------------------- */ -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ -#if 0 -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - memctl->memc_mamr = mamr_value; - - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - return (maxsize); -} -#endif - int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - #ifdef CONFIG_STATUS_LED volatile immap_t *immap = (immap_t *) CFG_IMMR; #endif diff --git a/board/lart/lart.c b/board/lart/lart.c index 66b730d..8d534c8 100644 --- a/board/lart/lart.c +++ b/board/lart/lart.c @@ -24,6 +24,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ @@ -33,8 +35,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -49,7 +49,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; bd_t *bd = gd->bd; bd->bi_dram[0].start = PHYS_SDRAM_1; diff --git a/board/logodl/logodl.c b/board/logodl/logodl.c index 95634ac..14fd28f 100644 --- a/board/logodl/logodl.c +++ b/board/logodl/logodl.c @@ -25,6 +25,8 @@ #include <common.h> #include <asm/arch/pxa-regs.h> +DECLARE_GLOBAL_DATA_PTR; + /** * board_init: - setup some data structures * @@ -33,8 +35,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -57,8 +57,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/lpd7a40x/lpd7a40x.c b/board/lpd7a40x/lpd7a40x.c index 4c373ee..e12bbf0 100644 --- a/board/lpd7a40x/lpd7a40x.c +++ b/board/lpd7a40x/lpd7a40x.c @@ -37,14 +37,14 @@ #include <lpd7a400_cpld.h> +DECLARE_GLOBAL_DATA_PTR; + /* * Miscellaneous platform dependent initialisations */ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* set up the I/O ports */ /* enable flash programming */ @@ -74,8 +74,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/lubbock/lubbock.c b/board/lubbock/lubbock.c index e618ab9..5829170 100644 --- a/board/lubbock/lubbock.c +++ b/board/lubbock/lubbock.c @@ -27,8 +27,7 @@ #include <common.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -36,8 +35,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -60,8 +57,6 @@ int board_late_init(void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c index a174b57..9e8ea2d 100644 --- a/board/lwmon/lwmon.c +++ b/board/lwmon/lwmon.c @@ -45,6 +45,8 @@ V* Verification: dzu@denx.de #include <linux/types.h> #include <linux/string.h> /* for strdup */ +DECLARE_GLOBAL_DATA_PTR; + /*------------------------ Local prototypes ---------------------------*/ static long int dram_size (long int, long int *, long int); static void kbd_init (void); @@ -455,8 +457,6 @@ Z* for the lwmon board. ***********************************************************************/ int board_postclk_init (void) { - DECLARE_GLOBAL_DATA_PTR; - kbd_init(); #ifdef CONFIG_MODEM_SUPPORT @@ -471,15 +471,11 @@ int board_postclk_init (void) struct serial_device * default_serial_console (void) { - DECLARE_GLOBAL_DATA_PTR; - return gd->do_mdm_init ? &serial_scc_device : &serial_smc_device; } static void kbd_init (void) { - DECLARE_GLOBAL_DATA_PTR; - uchar kbd_data[KEYBD_DATALEN]; uchar tmp_data[KEYBD_DATALEN]; uchar val, errcd; @@ -571,8 +567,6 @@ V* Verification: dzu@denx.de ***********************************************************************/ int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - uchar kbd_data[KEYBD_DATALEN]; char keybd_env[2 * KEYBD_DATALEN + 1]; uchar kbd_init_status = gd->kbd_status >> 8; diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c index d1c99fd..456411d 100644 --- a/board/mcc200/mcc200.c +++ b/board/mcc200/mcc200.c @@ -30,6 +30,8 @@ #include "mt48lc8m32b2-6-7.h" +DECLARE_GLOBAL_DATA_PTR; + extern flash_info_t flash_info[]; /* FLASH chips info */ ulong flash_get_size (ulong base, int banknum); @@ -190,8 +192,6 @@ int checkboard (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - /* * Adjust flash start and offset to detected values */ diff --git a/board/ml2/serial.c b/board/ml2/serial.c index 92baba9..74687f1 100644 --- a/board/ml2/serial.c +++ b/board/ml2/serial.c @@ -29,70 +29,59 @@ #include <ns16550.h> #endif -#if 0 -#include "serial.h" -#endif +DECLARE_GLOBAL_DATA_PTR; #if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2) const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1, - (NS16550_t) CFG_NS16550_COM2 }; + (NS16550_t) CFG_NS16550_COM2 +}; #endif -int -serial_init (void) +int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; + int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; #ifdef CFG_INIT_CHAN1 - (void)NS16550_init(COM_PORTS[0], clock_divisor); + (void) NS16550_init (COM_PORTS[0], clock_divisor); #endif #ifdef CFG_INIT_CHAN2 - (void)NS16550_init(COM_PORTS[1], clock_divisor); + (void) NS16550_init (COM_PORTS[1], clock_divisor); #endif - return 0; + return 0; } -void -serial_putc(const char c) +void serial_putc (const char c) { - if (c == '\n') - NS16550_putc(COM_PORTS[CFG_DUART_CHAN], '\r'); + if (c == '\n') + NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r'); - NS16550_putc(COM_PORTS[CFG_DUART_CHAN], c); + NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c); } -int -serial_getc(void) +int serial_getc (void) { - return NS16550_getc(COM_PORTS[CFG_DUART_CHAN]); + return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]); } -int -serial_tstc(void) +int serial_tstc (void) { - return NS16550_tstc(COM_PORTS[CFG_DUART_CHAN]); + return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]); } -void -serial_setbrg (void) +void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; + int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; #ifdef CFG_INIT_CHAN1 - NS16550_reinit(COM_PORTS[0], clock_divisor); + NS16550_reinit (COM_PORTS[0], clock_divisor); #endif #ifdef CFG_INIT_CHAN2 - NS16550_reinit(COM_PORTS[1], clock_divisor); + NS16550_reinit (COM_PORTS[1], clock_divisor); #endif } -void -serial_puts (const char *s) +void serial_puts (const char *s) { while (*s) { serial_putc (*s++); @@ -100,32 +89,27 @@ serial_puts (const char *s) } #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -void -kgdb_serial_init(void) +void kgdb_serial_init (void) { } -void -putDebugChar (int c) +void putDebugChar (int c) { serial_putc (c); } -void -putDebugStr (const char *str) +void putDebugStr (const char *str) { serial_puts (str); } -int -getDebugChar (void) +int getDebugChar (void) { - return serial_getc(); + return serial_getc (); } -void -kgdb_interruptible (int yes) +void kgdb_interruptible (int yes) { return; } -#endif /* CFG_CMD_KGDB */ +#endif /* CFG_CMD_KGDB */ diff --git a/board/modnet50/modnet50.c b/board/modnet50/modnet50.c index 448c623..4544069 100644 --- a/board/modnet50/modnet50.c +++ b/board/modnet50/modnet50.c @@ -24,8 +24,7 @@ #include <common.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -33,7 +32,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; /* address for the kernel command line */ gd->bd->bi_boot_params = 0x800; return 0; @@ -41,7 +39,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; if (CONFIG_NR_DRAM_BANKS == 2) { diff --git a/board/mp2usb/mp2usb.c b/board/mp2usb/mp2usb.c index e75be1e..486d44c 100644 --- a/board/mp2usb/mp2usb.c +++ b/board/mp2usb/mp2usb.c @@ -31,15 +31,14 @@ #include <dm9161.h> #include <asm/mach-types.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; + /* * Miscelaneous platform dependent initialisations */ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Enable Ctrlc */ console_init_f (); @@ -56,8 +55,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM; gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; return 0; diff --git a/board/mpc8349ads/mpc8349ads.c b/board/mpc8349ads/mpc8349ads.c index 505acbc..9841298 100644 --- a/board/mpc8349ads/mpc8349ads.c +++ b/board/mpc8349ads/mpc8349ads.c @@ -64,7 +64,7 @@ long int initdram (int board_type) /* DDR SDRAM - Main SODIMM */ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) - msize = spd_sdram(NULL); + msize = spd_sdram(); #else msize = fixed_sdram(); #endif diff --git a/board/mpc8349ads/pci.c b/board/mpc8349ads/pci.c index c559424..319e35c 100644 --- a/board/mpc8349ads/pci.c +++ b/board/mpc8349ads/pci.c @@ -26,6 +26,8 @@ #include <asm/mpc8349_pci.h> #include <i2c.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_PCI /* System RAM mapped to PCI space */ @@ -127,7 +129,6 @@ pib_init(void) void pci_init_board(void) { - DECLARE_GLOBAL_DATA_PTR; volatile immap_t * immr; volatile clk8349_t * clk; volatile law8349_t * pci_law; diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c index b331d6e..06d021a 100644 --- a/board/mpl/common/common_util.c +++ b/board/mpl/common/common_util.c @@ -42,6 +42,9 @@ #include "../mip405/mip405.h" #include <405gp_pci.h> #endif + +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_PATI) #define FIRM_START 0xFFF00000 #endif @@ -584,7 +587,6 @@ extern int get_boot_mode(void); void video_get_info_str (int line_number, char *info) { /* init video info strings for graphic console */ - DECLARE_GLOBAL_DATA_PTR; PPC405_SYS_INFO sys_info; char rev; int i,boot; diff --git a/board/mpl/common/memtst.c b/board/mpl/common/memtst.c index 2c77d37..ff1190a 100644 --- a/board/mpl/common/memtst.c +++ b/board/mpl/common/memtst.c @@ -50,13 +50,15 @@ int testdram (void) #include <asm/processor.h> #include <405gp_i2c.h> +DECLARE_GLOBAL_DATA_PTR; + #define FALSE 0 #define TRUE 1 -#define TEST_QUIET 8 +#define TEST_QUIET 8 #define TEST_SHOW_PROG 4 #define TEST_SHOW_ERR 2 -#define TEST_SHOW_ALL 1 +#define TEST_SHOW_ALL 1 #define TESTPAT1 0xAA55AA55 #define TESTPAT2 0x55AA55AA @@ -468,7 +470,6 @@ static RAM_MEMTEST_FUNC test_stage[TEST_STAGES] = { void mem_test_reloc(void) { - DECLARE_GLOBAL_DATA_PTR; unsigned long addr; int i; for (i=0; i< TEST_STAGES; i++) { diff --git a/board/mpl/common/pci.c b/board/mpl/common/pci.c index 692930b..bde14be 100644 --- a/board/mpl/common/pci.c +++ b/board/mpl/common/pci.c @@ -32,7 +32,7 @@ #ifdef CONFIG_405GP #ifdef CONFIG_PCI -#undef DEBUG +DECLARE_GLOBAL_DATA_PTR; #include "piix4_pci.h" #include "pci_parts.h" @@ -94,7 +94,6 @@ static struct pci_controller hose = { static void reloc_pci_cfg_table(struct pci_config_table *table) { - DECLARE_GLOBAL_DATA_PTR; unsigned long addr; for (; table && table->vendor; table++) { diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index 9c469b0..34f3289 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -70,6 +70,9 @@ #include "../common/common_util.h" #include <i2c.h> #include <rtc.h> + +DECLARE_GLOBAL_DATA_PTR; + extern block_dev_desc_t * scsi_get_dev(int dev); extern block_dev_desc_t * ide_get_dev(int dev); @@ -189,8 +192,6 @@ const sdram_t sdram_table[] = { void SDRAM_err (const char *s) { #ifndef SDRAM_DEBUG - DECLARE_GLOBAL_DATA_PTR; - (void) get_clocks (); gd->baudrate = 9600; serial_init (); @@ -241,8 +242,6 @@ void write_4hex (unsigned long val) int init_sdram (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long tmp, baseaddr; unsigned short i; unsigned char trp_clocks, @@ -681,7 +680,6 @@ extern flash_info_t flash_info[]; /* info for FLASH chips */ int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; /* adjust flash start and size as well as the offset */ gd->bd->bi_flashstart=0-flash_info[0].size; gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN; diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c index a398362..3828608 100644 --- a/board/mpl/pip405/pip405.c +++ b/board/mpl/pip405/pip405.c @@ -31,6 +31,8 @@ #include "../common/isa.h" #include "../common/common_util.h" +DECLARE_GLOBAL_DATA_PTR; + #undef SDRAM_DEBUG #define FALSE 0 @@ -134,8 +136,6 @@ unsigned short NSto10PS (unsigned char spd_byte) void SDRAM_err (const char *s) { #ifndef SDRAM_DEBUG - DECLARE_GLOBAL_DATA_PTR; - (void) get_clocks (); gd->baudrate = 9600; serial_init (); @@ -191,9 +191,6 @@ int board_early_init_f (void) trc_clocks, tctp_clocks; unsigned char cal_index, cal_val, spd_version, spd_chksum; unsigned char buf[8]; -#ifdef SDRAM_DEBUG - DECLARE_GLOBAL_DATA_PTR; -#endif /* set up the config port */ mtdcr (ebccfga, pb7ap); mtdcr (ebccfgd, CONFIG_PORT_AP); @@ -613,8 +610,6 @@ static int test_dram (unsigned long ramsize); long int initdram (int board_type) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long bank_reg[4], tmp, bank_size; int i, ds; unsigned long TotalSize; @@ -666,7 +661,6 @@ extern flash_info_t flash_info[]; /* info for FLASH chips */ int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; /* adjust flash start and size as well as the offset */ gd->bd->bi_flashstart=0-flash_info[0].size; gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN; diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c index ffdba5d..0d2003d 100644 --- a/board/mpl/vcma9/vcma9.c +++ b/board/mpl/vcma9/vcma9.c @@ -32,7 +32,7 @@ #include "vcma9.h" #include "../common/common_util.h" -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; #define FCLK_SPEED 1 @@ -71,7 +71,6 @@ static inline void delay(unsigned long loops) int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); @@ -275,8 +274,6 @@ static void Show_VCMA9_Info(char *board_name, char *serial) int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = Get_SDRAM_ChipSize() * Get_SDRAM_ChipNr(); diff --git a/board/mvblue/mvblue.c b/board/mvblue/mvblue.c index 20a551d..ee8f3e3 100644 --- a/board/mvblue/mvblue.c +++ b/board/mvblue/mvblue.c @@ -14,6 +14,8 @@ #include <pci.h> #endif +DECLARE_GLOBAL_DATA_PTR; + u32 get_BoardType (void); #define PCI_CONFIG(b,d,f,r) cpu_to_le32(0x80000000 | ((b&0xff)<<16) \ @@ -50,7 +52,6 @@ void hw_watchdog_reset (void) } int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; ulong busfreq = get_bus_freq (0); char buf[32]; u32 BoardType = get_BoardType (); diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c index 5c33ba3..913f95c 100644 --- a/board/mx1ads/mx1ads.c +++ b/board/mx1ads/mx1ads.c @@ -27,7 +27,7 @@ /*#include <mc9328.h>*/ #include <asm/arch/imx-regs.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; #define FCLK_SPEED 1 @@ -55,10 +55,11 @@ #if 0 -static inline void delay (unsigned long loops) { +static inline void delay (unsigned long loops) +{ __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); } #endif @@ -67,62 +68,58 @@ static inline void delay (unsigned long loops) { * Miscellaneous platform dependent initialisations */ -void SetAsynchMode(void) { - __asm__ ( - "mrc p15,0,r0,c1,c0,0 \n" - "mov r2, #0xC0000000 \n" - "orr r0,r2,r0 \n" - "mcr p15,0,r0,c1,c0,0 \n" - ); +void SetAsynchMode (void) +{ + __asm__ ("mrc p15,0,r0,c1,c0,0 \n" + "mov r2, #0xC0000000 \n" + "orr r0,r2,r0 \n" "mcr p15,0,r0,c1,c0,0 \n"); } static u32 mc9328sid; -int board_init (void) { +int board_init (void) +{ + volatile unsigned int tmp; - DECLARE_GLOBAL_DATA_PTR; + mc9328sid = SIDR; - volatile unsigned int tmp; + GPCR = 0x000003AB; /* I/O pad driving strength */ - mc9328sid = SIDR; - - GPCR = 0x000003AB; /* I/O pad driving strength */ - -/* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */ + /* MX1_CS1U = 0x00000A00; *//* SRAM initialization */ /* MX1_CS1L = 0x11110601; */ - MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */ + MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */ /* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and * BCLK divider to 2 (i.e. BCLK to 48 MHz) */ - CSCR = 0xAF000403; + CSCR = 0xAF000403; - CSCR |= 0x00200000; /* Trigger the restart bit(bit 21) */ - CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */ + CSCR |= 0x00200000; /* Trigger the restart bit(bit 21) */ + CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */ /* setup cs4 for cs8900 ethernet */ - CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */ - CS4L = 0x00001501; + CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */ + CS4L = 0x00001501; - GIUS(0) &= 0xFF3FFFFF; - GPR(0) &= 0xFF3FFFFF; + GIUS (0) &= 0xFF3FFFFF; + GPR (0) &= 0xFF3FFFFF; - tmp = *(unsigned int *)(0x1500000C); - tmp = *(unsigned int *)(0x1500000C); + tmp = *(unsigned int *) (0x1500000C); + tmp = *(unsigned int *) (0x1500000C); - SetAsynchMode(); + SetAsynchMode (); gd->bd->bi_arch_number = MACH_TYPE_MX1ADS; - gd->bd->bi_boot_params = 0x08000100; /* adress of boot parameters */ + gd->bd->bi_boot_params = 0x08000100; /* adress of boot parameters */ - icache_enable(); - dcache_enable(); + icache_enable (); + dcache_enable (); /* set PERCLKs */ - PCDR = 0x00000055; /* set PERCLKS */ + PCDR = 0x00000055; /* set PERCLKS */ /* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place @@ -135,34 +132,38 @@ int board_init (void) { return 0; } -int board_late_init(void) { - - setenv("stdout", "serial"); - setenv("stderr", "serial"); - - switch (mc9328sid) { - case 0x0005901d : - printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",mc9328sid); - break; - case 0x04d4c01d : - printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",mc9328sid); - break; - case 0x00d4c01d : - printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",mc9328sid); - break; - - default : - printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",mc9328sid); - break; +int board_late_init (void) +{ + + setenv ("stdout", "serial"); + setenv ("stderr", "serial"); + + switch (mc9328sid) { + case 0x0005901d: + printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n", + mc9328sid); + break; + case 0x04d4c01d: + printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n", + mc9328sid); + break; + case 0x00d4c01d: + printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n", + mc9328sid); + break; + + default: + printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n", + mc9328sid); + break; } return 0; } -int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - +int dram_init (void) +{ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; return 0; } diff --git a/board/mx1fs2/mx1fs2.c b/board/mx1fs2/mx1fs2.c index 9e7a06c..1c026f0 100644 --- a/board/mx1fs2/mx1fs2.c +++ b/board/mx1fs2/mx1fs2.c @@ -19,9 +19,10 @@ */ #include <common.h> - #include <asm/arch/imx-regs.h> +DECLARE_GLOBAL_DATA_PTR; + #define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) extern void imx_gpio_mode(int gpio_mode); @@ -79,8 +80,6 @@ static void logo_init(void) int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_arch_number = MACH_TYPE_MX1FS2; gd->bd->bi_boot_params = 0x08000100; serial_init(); @@ -91,8 +90,6 @@ serial_init(); int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - #if ( CONFIG_NR_DRAM_BANKS > 0 ) gd->bd->bi_dram[0].start = MX1FS2_SDRAM_1; gd->bd->bi_dram[0].size = MX1FS2_SDRAM_1_SIZE; diff --git a/board/nc650/flash.c b/board/nc650/flash.c index ce2f83b..8d7c172 100644 --- a/board/nc650/flash.c +++ b/board/nc650/flash.c @@ -32,6 +32,8 @@ #include <common.h> #include <mpc8xx.h> +DECLARE_GLOBAL_DATA_PTR; + #ifndef CFG_OR_TIMING_FLASH_AT_50MHZ #define CFG_OR_TIMING_FLASH_AT_50MHZ (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ OR_SCY_2_CLK | OR_EHTR | OR_BI) @@ -95,8 +97,6 @@ unsigned long flash_init (void) #ifdef CFG_OR_TIMING_FLASH_AT_50MHZ int scy, trlx, flash_or_timing, clk_diff; - DECLARE_GLOBAL_DATA_PTR; - scy = (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4; if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) { trlx = OR_TRLX; diff --git a/board/netstar/netstar.c b/board/netstar/netstar.c index 62615e5..4b7eba1 100644 --- a/board/netstar/netstar.c +++ b/board/netstar/netstar.c @@ -22,10 +22,10 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of NetStar board */ /* TODO: use define from asm/mach-types.h */ gd->bd->bi_arch_number = 692; @@ -38,8 +38,6 @@ int board_init(void) int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/ns9750dev/ns9750dev.c b/board/ns9750dev/ns9750dev.c index ea00d5a..1dd348a 100644 --- a/board/ns9750dev/ns9750dev.c +++ b/board/ns9750dev/ns9750dev.c @@ -41,6 +41,8 @@ # include <./ns9750_bbus.h> #endif +DECLARE_GLOBAL_DATA_PTR; + void flash__init( void ); void ether__init( void ); @@ -60,8 +62,6 @@ static inline void delay( unsigned long loops ) int board_init( void ) { - DECLARE_GLOBAL_DATA_PTR; - /* Active BBUS modules */ *get_bbus_reg_addr( NS9750_BBUS_MASTER_RESET ) = 0; @@ -114,8 +114,6 @@ void ether__init (void) ******************************/ int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/nx823/nx823.c b/board/nx823/nx823.c index 65d45c1..4a426ec 100644 --- a/board/nx823/nx823.c +++ b/board/nx823/nx823.c @@ -28,12 +28,10 @@ #include <malloc.h> #include <mpc8xx.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; static long int dram_size (long int, long int *, long int); -/* ------------------------------------------------------------------------- */ - #define _NOT_USED_ 0xFFFFFFFF const uint sdram_table[] = { @@ -366,8 +364,6 @@ u_long *my_sernum; int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - char tmp[50]; u_char *e = gd->bd->bi_enetaddr; @@ -387,8 +383,6 @@ int misc_init_r (void) void load_sernum_ethaddr (void) { - DECLARE_GLOBAL_DATA_PTR; - int i; bd_t *bd = gd->bd; diff --git a/board/omap1510inn/omap1510innovator.c b/board/omap1510inn/omap1510innovator.c index f037f42..8941209 100644 --- a/board/omap1510inn/omap1510innovator.c +++ b/board/omap1510inn/omap1510innovator.c @@ -31,6 +31,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + static void flash__init (void); static void ether__init (void); @@ -47,8 +49,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of OMAP 1510-Board */ gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR; @@ -122,8 +122,6 @@ static void ether__init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/omap1610inn/omap1610innovator.c b/board/omap1610inn/omap1610innovator.c index 7842518..8dbe686 100644 --- a/board/omap1610inn/omap1610innovator.c +++ b/board/omap1610inn/omap1610innovator.c @@ -36,6 +36,8 @@ #include <./configs/omap1510.h> #endif +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_CS_AUTOBOOT unsigned long omap_flash_base; #endif @@ -60,8 +62,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - if (machine_is_omap_h2()) gd->bd->bi_arch_number = MACH_TYPE_OMAP_H2; else if (machine_is_omap_innovator()) @@ -153,8 +153,6 @@ void ether__init (void) ******************************/ int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c index 2387176..f7f75e0 100644 --- a/board/omap2420h4/omap2420h4.c +++ b/board/omap2420h4/omap2420h4.c @@ -36,7 +36,9 @@ extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; #endif - void wait_for_command_complete(unsigned int wd_base); +DECLARE_GLOBAL_DATA_PTR; + +void wait_for_command_complete(unsigned int wd_base); /******************************************************* * Routine: delay @@ -54,8 +56,6 @@ static inline void delay (unsigned long loops) *****************************************/ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gpmc_init(); /* in SRAM or SDRM, finish GPMC */ gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4; /* board id for linux */ @@ -195,7 +195,6 @@ void ether_init (void) **********************************************/ int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; unsigned int size0=0,size1=0; u32 mtype, btype, rev, cpu; u8 chg_on = 0x5; /* enable charge of back up battery */ diff --git a/board/omap5912osk/omap5912osk.c b/board/omap5912osk/omap5912osk.c index 1faa084..e9e6b0e 100644 --- a/board/omap5912osk/omap5912osk.c +++ b/board/omap5912osk/omap5912osk.c @@ -38,6 +38,8 @@ #include <./configs/omap1510.h> #endif +DECLARE_GLOBAL_DATA_PTR; + void flash__init (void); void ether__init (void); void set_muxconf_regs (void); @@ -58,8 +60,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_arch_number = MACH_TYPE_OMAP_OSK; /* adress of boot parameters */ @@ -136,8 +136,6 @@ void ether__init (void) ******************************/ int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/omap730p2/omap730p2.c b/board/omap730p2/omap730p2.c index 256c6a6..309d667 100644 --- a/board/omap730p2/omap730p2.c +++ b/board/omap730p2/omap730p2.c @@ -34,6 +34,8 @@ #include <./configs/omap730.h> #endif +DECLARE_GLOBAL_DATA_PTR; + int test_boot_mode(void); void spin_up_leds(void); void flash__init (void); @@ -84,8 +86,6 @@ void toggle_backup_led(void) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of OMAP 730 P2 Board - Same as the Innovator! */ gd->bd->bi_arch_number = MACH_TYPE_OMAP_PERSEUS2; @@ -180,8 +180,6 @@ void ether__init (void) ******************************/ int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/oxc/oxc.c b/board/oxc/oxc.c index fa7ff02..6cc3cc5 100644 --- a/board/oxc/oxc.c +++ b/board/oxc/oxc.c @@ -26,6 +26,8 @@ #include <pci.h> #include <i2c.h> +DECLARE_GLOBAL_DATA_PTR; + int checkboard (void) { puts ( "Board: OXC8240\n" ); @@ -184,8 +186,6 @@ int misc_init_r (void) #ifdef CFG_OXC_GENERATE_IP { - DECLARE_GLOBAL_DATA_PTR; - char str[32]; unsigned long ip = CFG_OXC_IPMASK; bd_t *bd = gd->bd; diff --git a/board/pcippc2/fpga_serial.c b/board/pcippc2/fpga_serial.c index 579bfc7..5f89d9b 100644 --- a/board/pcippc2/fpga_serial.c +++ b/board/pcippc2/fpga_serial.c @@ -29,6 +29,8 @@ #include "hardware.h" #include "pcippc2.h" +DECLARE_GLOBAL_DATA_PTR; + /* 8 data, 1 stop, no parity */ #define LCRVAL 0x03 @@ -92,8 +94,6 @@ int fpga_serial_tstc (void) void fpga_serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = 115200 / gd->baudrate; fpga_serial_wait (); diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c index 231b505..a216c55 100644 --- a/board/pcippc2/pcippc2.c +++ b/board/pcippc2/pcippc2.c @@ -34,6 +34,8 @@ #include "sconsole.h" #include "fpga_serial.h" +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_WATCHDOG) static int pcippc2_wdt_init_done = 0; @@ -108,8 +110,6 @@ int board_early_init_f (void) void after_reloc (ulong dest_addr) { - DECLARE_GLOBAL_DATA_PTR; - /* Jump to the main U-Boot board init code */ board_init_r ((gd_t *)gd, dest_addr); diff --git a/board/pcippc2/sconsole.c b/board/pcippc2/sconsole.c index a9f2b29..3b19069 100644 --- a/board/pcippc2/sconsole.c +++ b/board/pcippc2/sconsole.c @@ -26,6 +26,8 @@ #include "sconsole.h" +DECLARE_GLOBAL_DATA_PTR; + void (*sconsole_putc) (char) = 0; void (*sconsole_puts) (const char *) = 0; int (*sconsole_getc) (void) = 0; @@ -34,8 +36,6 @@ void (*sconsole_setbrg) (void) = 0; int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - sconsole_buffer_t *sb = SCONSOLE_BUFFER; sb->pos = 0; @@ -104,8 +104,6 @@ int serial_tstc (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - if (sconsole_setbrg) { (*sconsole_setbrg) (); } else { diff --git a/board/pleb2/pleb2.c b/board/pleb2/pleb2.c index ce9245c..dc6fac4 100644 --- a/board/pleb2/pleb2.c +++ b/board/pleb2/pleb2.c @@ -28,8 +28,7 @@ #include <common.h> #include <asm-arm/mach-types.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -37,8 +36,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -61,8 +58,6 @@ int board_late_init(void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c index d4cc5cb..65c5291 100644 --- a/board/pm520/pm520.c +++ b/board/pm520/pm520.c @@ -34,6 +34,8 @@ #include "mt48lc16m16a2-75.h" #endif +DECLARE_GLOBAL_DATA_PTR; + #ifndef CFG_RAMBOOT static void sdram_start (int hi_addr) { @@ -281,7 +283,6 @@ extern flash_info_t flash_info[]; /* info for FLASH chips */ int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; /* adjust flash start */ gd->bd->bi_flashstart = flash_info[0].start[0]; return (0); diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c index 377aaa8..b2f348d 100644 --- a/board/pn62/pn62.c +++ b/board/pn62/pn62.c @@ -26,6 +26,7 @@ #include "pn62.h" +DECLARE_GLOBAL_DATA_PTR; static int get_serial_number (char *string, int size); static int get_mac_address (int id, u8 * mac, char *string, int size); @@ -122,8 +123,6 @@ void pci_init_board (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - char str[20]; u8 mac[6]; diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c index d42a643..2f28e9d 100644 --- a/board/prodrive/p3p440/p3p440.c +++ b/board/prodrive/p3p440/p3p440.c @@ -29,6 +29,8 @@ #include "p3p440.h" +DECLARE_GLOBAL_DATA_PTR; + void set_led(int color) { switch (color) { @@ -141,8 +143,6 @@ int checkboard(void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - /* * Adjust flash start and offset to detected values */ @@ -206,8 +206,6 @@ int pci_pre_init(struct pci_controller *hose) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c index d5b993a..5765c55 100644 --- a/board/pxa255_idp/pxa_idp.c +++ b/board/pxa255_idp/pxa_idp.c @@ -33,8 +33,7 @@ #include <common.h> #include <command.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -42,8 +41,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -86,8 +83,6 @@ int board_late_init(void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/quantum/quantum.c b/board/quantum/quantum.c index 2861bc3..afa6e11 100644 --- a/board/quantum/quantum.c +++ b/board/quantum/quantum.c @@ -170,14 +170,14 @@ static long int dram_size (long int mamr_value, long int *base, memctl->memc_mamr = mamr_value; for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ + addr = (volatile ulong *)(base + cnt); /* pointer arith! */ save[i++] = *addr; *addr = ~cnt; } /* write 0 to base address */ - addr = base; + addr = (volatile ulong *)base; save[i] = *addr; *addr = 0; @@ -194,7 +194,7 @@ static long int dram_size (long int mamr_value, long int *base, } for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ + addr = (volatile ulong *)(base + cnt); /* pointer arith! */ val = *addr; *addr = save[--i]; diff --git a/board/rbc823/kbd.c b/board/rbc823/kbd.c index c27929d..6d530f6 100644 --- a/board/rbc823/kbd.c +++ b/board/rbc823/kbd.c @@ -33,6 +33,8 @@ #include <devices.h> #include <lcd.h> +DECLARE_GLOBAL_DATA_PTR; + #define SMC_INDEX 0 #define PROFF_SMC PROFF_SMC1 #define CPM_CR_CH_SMC CPM_CR_CH_SMC1 @@ -46,8 +48,6 @@ void smc1_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *im = (immap_t *)CFG_IMMR; volatile cpm8xx_t *cp = &(im->im_cpm); diff --git a/board/sacsng/clkinit.c b/board/sacsng/clkinit.c index ea4c65d..edb775d 100644 --- a/board/sacsng/clkinit.c +++ b/board/sacsng/clkinit.c @@ -30,6 +30,8 @@ #include "clkinit.h" +DECLARE_GLOBAL_DATA_PTR; + int Daq64xSampling = 0; @@ -257,7 +259,6 @@ void Daq_BRG_Set_ExtClk(uint brg, uint extc) uint Daq_BRG_Rate(uint brg) { - DECLARE_GLOBAL_DATA_PTR; volatile immap_t *immr = (immap_t *)CFG_IMMR; uint *brg_ptr; uint brg_cnt; @@ -295,7 +296,6 @@ uint Daq_Get_SampleRate(void) void Daq_Init_Clocks(int sample_rate, int sample_64x) { - DECLARE_GLOBAL_DATA_PTR; volatile ioport_t *iopa = ioport_addr((immap_t *)CFG_IMMR, 0 /* port A */); uint mclk_divisor; /* MCLK divisor */ int flag; /* Interrupt state */ diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c index 3530416..7816472 100644 --- a/board/sandburst/common/sb_common.c +++ b/board/sandburst/common/sb_common.c @@ -29,6 +29,8 @@ #include "ppc440gx_i2c.h" #include "sb_common.h" +DECLARE_GLOBAL_DATA_PTR; + long int fixed_sdram (void); /************************************************************************* @@ -203,7 +205,7 @@ long int initdram (int board_type) long dram_size = 0; #if defined(CONFIG_SPD_EEPROM) - dram_size = spd_sdram (0); + dram_size = spd_sdram (); #else dram_size = fixed_sdram (); #endif @@ -341,8 +343,6 @@ int pci_pre_init(struct pci_controller * hose ) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose ) { - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ diff --git a/board/sbc405/sbc405.c b/board/sbc405/sbc405.c index cad5873..0ae6d0b 100644 --- a/board/sbc405/sbc405.c +++ b/board/sbc405/sbc405.c @@ -98,7 +98,7 @@ int checkboard (void) long int initdram (int board_type) { - return spd_sdram (0); + return spd_sdram (); } /* ------------------------------------------------------------------------- */ diff --git a/board/sbc8240/sbc8240.c b/board/sbc8240/sbc8240.c index a6d3bab..8a52f67 100644 --- a/board/sbc8240/sbc8240.c +++ b/board/sbc8240/sbc8240.c @@ -29,12 +29,12 @@ #include <asm/processor.h> #include <pci.h> +DECLARE_GLOBAL_DATA_PTR; + #define BOARD_REV_REG 0xFE80002B int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char revision = *(volatile char *)(BOARD_REV_REG); char buf[32]; diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c index cd52324..b6add59 100644 --- a/board/sc520_cdp/sc520_cdp.c +++ b/board/sc520_cdp/sc520_cdp.c @@ -30,6 +30,8 @@ #include <asm/ic/ali512x.h> #include <spi.h> +DECLARE_GLOBAL_DATA_PTR; + #undef SC520_CDP_DEBUG #ifdef SC520_CDP_DEBUG @@ -481,8 +483,6 @@ int pci_enable_legacy_video_ports(struct pci_controller *hose) int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - init_sc520(); bus_init(); irq_init(); diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c index e7a7d51..ed226fd 100644 --- a/board/sc520_spunk/sc520_spunk.c +++ b/board/sc520_spunk/sc520_spunk.c @@ -29,9 +29,7 @@ #include <asm/pci.h> #include <asm/ic/sc520.h> - -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Theory: @@ -483,8 +481,6 @@ int pci_enable_legacy_video_ports(struct pci_controller *hose) int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - init_sc520(); bus_init(); irq_init(); diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c index 3ed8753..3f6831b 100644 --- a/board/scb9328/scb9328.c +++ b/board/scb9328/scb9328.c @@ -20,42 +20,41 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_SHOW_BOOT_PROGRESS # define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) #else # define SHOW_BOOT_PROGRESS(arg) #endif -int board_init( void ){ - DECLARE_GLOBAL_DATA_PTR; - - gd->bd->bi_arch_number = MACH_TYPE_SCB9328; - gd->bd->bi_boot_params = 0x08000100; +int board_init (void) +{ + gd->bd->bi_arch_number = MACH_TYPE_SCB9328; + gd->bd->bi_boot_params = 0x08000100; - return 0; + return 0; } -int dram_init( void ){ - DECLARE_GLOBAL_DATA_PTR; - +int dram_init (void) +{ #if ( CONFIG_NR_DRAM_BANKS > 0 ) - gd->bd->bi_dram[0].start = SCB9328_SDRAM_1; - gd->bd->bi_dram[0].size = SCB9328_SDRAM_1_SIZE; + gd->bd->bi_dram[0].start = SCB9328_SDRAM_1; + gd->bd->bi_dram[0].size = SCB9328_SDRAM_1_SIZE; #endif #if ( CONFIG_NR_DRAM_BANKS > 1 ) - gd->bd->bi_dram[1].start = SCB9328_SDRAM_2; - gd->bd->bi_dram[1].size = SCB9328_SDRAM_2_SIZE; + gd->bd->bi_dram[1].start = SCB9328_SDRAM_2; + gd->bd->bi_dram[1].size = SCB9328_SDRAM_2_SIZE; #endif #if ( CONFIG_NR_DRAM_BANKS > 2 ) - gd->bd->bi_dram[2].start = SCB9328_SDRAM_3; - gd->bd->bi_dram[2].size = SCB9328_SDRAM_3_SIZE; + gd->bd->bi_dram[2].start = SCB9328_SDRAM_3; + gd->bd->bi_dram[2].size = SCB9328_SDRAM_3_SIZE; #endif #if ( CONFIG_NR_DRAM_BANKS > 3 ) - gd->bd->bi_dram[3].start = SCB9328_SDRAM_4; - gd->bd->bi_dram[3].size = SCB9328_SDRAM_4_SIZE; + gd->bd->bi_dram[3].start = SCB9328_SDRAM_4; + gd->bd->bi_dram[3].size = SCB9328_SDRAM_4_SIZE; #endif - - return 0; + return 0; } /** diff --git a/board/shannon/shannon.c b/board/shannon/shannon.c index 0d9f146..8cd1fc3 100644 --- a/board/shannon/shannon.c +++ b/board/shannon/shannon.c @@ -24,8 +24,7 @@ #include <common.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -33,8 +32,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* but if we use InfernoLoader, we must do some inits here */ @@ -75,7 +72,6 @@ int dram_init (void) { #if defined(PHYS_SDRAM_1) || defined(PHYS_SDRAM_2) || \ defined(PHYS_SDRAM_3) || defined(PHYS_SDRAM_4) - DECLARE_GLOBAL_DATA_PTR; bd_t *bd = gd->bd; #endif diff --git a/board/siemens/SCM/scm.c b/board/siemens/SCM/scm.c index d20688d..8783aaf 100644 --- a/board/siemens/SCM/scm.c +++ b/board/siemens/SCM/scm.c @@ -27,6 +27,8 @@ #include "scm.h" +DECLARE_GLOBAL_DATA_PTR; + static void config_scoh_cs(void); extern int fpga_init(void); @@ -300,8 +302,6 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, */ int power_on_reset (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Test Reset Status Register */ return gd->reset_status & RSR_CSRS ? 0 : 1; } diff --git a/board/sixnet/sixnet.c b/board/sixnet/sixnet.c index a25dffd..a4cb4dc 100644 --- a/board/sixnet/sixnet.c +++ b/board/sixnet/sixnet.c @@ -38,6 +38,8 @@ extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; #endif +DECLARE_GLOBAL_DATA_PTR; + #define ORMASK(size) ((-size) & OR_AM_MSK) static long ram_size(ulong *, long); @@ -256,8 +258,6 @@ int board_postclk_init (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; char* s; diff --git a/board/smdk2400/smdk2400.c b/board/smdk2400/smdk2400.c index cb70218..4d1f1a6 100644 --- a/board/smdk2400/smdk2400.c +++ b/board/smdk2400/smdk2400.c @@ -28,7 +28,7 @@ #include <common.h> #include <s3c2400.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_MODEM_SUPPORT static int key_pressed(void); @@ -45,7 +45,6 @@ extern int do_mdm_init; /* defined in common/main.c */ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); @@ -94,8 +93,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/smdk2410/smdk2410.c b/board/smdk2410/smdk2410.c index 9623aef..802348d 100644 --- a/board/smdk2410/smdk2410.c +++ b/board/smdk2410/smdk2410.c @@ -28,7 +28,7 @@ #include <common.h> #include <s3c2410.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; #define FCLK_SPEED 1 @@ -67,7 +67,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); @@ -117,8 +116,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/stamp/stamp.c b/board/stamp/stamp.c index 3fe0134..7e3af20 100644 --- a/board/stamp/stamp.c +++ b/board/stamp/stamp.c @@ -29,6 +29,8 @@ #include <asm/mem_init.h> #include "stamp.h" +DECLARE_GLOBAL_DATA_PTR; + #define STATUS_LED_OFF 0 #define STATUS_LED_ON 1 @@ -49,7 +51,6 @@ int checkboard (void) long int initdram (int board_type) { - DECLARE_GLOBAL_DATA_PTR; #ifdef DEBUG printf ("SDRAM attributes:\n"); printf (" tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; " diff --git a/board/sx1/sx1.c b/board/sx1/sx1.c index e45f6ae..aaef76e 100644 --- a/board/sx1/sx1.c +++ b/board/sx1/sx1.c @@ -27,6 +27,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + static void flash__init (void); static void ether__init (void); @@ -43,8 +45,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of SX1 Board */ gd->bd->bi_arch_number = MACH_TYPE_SX1; @@ -116,8 +116,6 @@ static void ether__init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c index dada673..b5c12e3 100644 --- a/board/tqm834x/tqm834x.c +++ b/board/tqm834x/tqm834x.c @@ -32,6 +32,8 @@ #include <asm-ppc/mmu.h> #include <pci.h> +DECLARE_GLOBAL_DATA_PTR; + #define IOSYNC asm("eieio") #define ISYNC asm("isync") #define SYNC asm("sync") @@ -142,7 +144,6 @@ int checkboard (void) puts("Board: TQM834x\n"); #ifdef CONFIG_PCI - DECLARE_GLOBAL_DATA_PTR; volatile immap_t * immr; u32 w, f; diff --git a/board/tqm85xx/tqm85xx.c b/board/tqm85xx/tqm85xx.c index c03b60d..69b9101 100644 --- a/board/tqm85xx/tqm85xx.c +++ b/board/tqm85xx/tqm85xx.c @@ -36,6 +36,8 @@ #include <spd.h> #include <flash.h> +DECLARE_GLOBAL_DATA_PTR; + extern flash_info_t flash_info[]; /* FLASH chips info */ void local_bus_init (void); @@ -257,7 +259,6 @@ int checkboard (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ccsr_lbc_t *memctl = &immap->im_lbc; diff --git a/board/tqm8xx/flash.c b/board/tqm8xx/flash.c index 97bb5c3..ab57ee5 100644 --- a/board/tqm8xx/flash.c +++ b/board/tqm8xx/flash.c @@ -31,6 +31,8 @@ #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) # ifndef CFG_OR_TIMING_FLASH_AT_50MHZ # define CFG_OR_TIMING_FLASH_AT_50MHZ (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ @@ -63,8 +65,6 @@ unsigned long flash_init (void) #ifdef CFG_OR_TIMING_FLASH_AT_50MHZ int scy, trlx, flash_or_timing, clk_diff; - DECLARE_GLOBAL_DATA_PTR; - scy = (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4; if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) { trlx = OR_TRLX; diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c index 017bdf9..520bea8 100644 --- a/board/tqm8xx/tqm8xx.c +++ b/board/tqm8xx/tqm8xx.c @@ -31,12 +31,10 @@ #include <ps2mult.h> #endif -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; static long int dram_size (long int, long int *, long int); -/* ------------------------------------------------------------------------- */ - #define _NOT_USED_ 0xFFFFFFFF const uint sdram_table[] = @@ -104,8 +102,6 @@ const uint sdram_table[] = int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char *s = getenv ("serial#"); puts ("Board: "); diff --git a/board/trab/memory.c b/board/trab/memory.c index 9104413..4097892 100644 --- a/board/trab/memory.c +++ b/board/trab/memory.c @@ -454,10 +454,11 @@ int memory_post_tests (unsigned long start, unsigned long size) } #if 0 +DECLARE_GLOBAL_DATA_PTR; + int memory_post_test (int flags) { int ret = 0; - DECLARE_GLOBAL_DATA_PTR; bd_t *bd = gd->bd; unsigned long memsize = (bd->bi_memsize >= 256 << 20 ? 256 << 20 : bd->bi_memsize) - (1 << 20); diff --git a/board/trab/trab.c b/board/trab/trab.c index e8dfd2c..868a899 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -28,7 +28,7 @@ #include <s3c2400.h> #include <command.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; #ifdef CFG_BRIGHTNESS static void spi_init(void); @@ -52,8 +52,6 @@ extern int do_mdm_init; /* defined in common/main.c */ #define KBD_MDELAY 5000 static void udelay_no_timer (int usec) { - DECLARE_GLOBAL_DATA_PTR; - int i; int delay = usec * 3; @@ -70,7 +68,6 @@ int board_init () #if defined(CONFIG_VFD) extern int vfd_init_clocks(void); #endif - DECLARE_GLOBAL_DATA_PTR; S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); @@ -141,8 +138,6 @@ int board_init () int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; return 0; diff --git a/board/trab/vfd.c b/board/trab/vfd.c index f510ee5..cea8b0b 100644 --- a/board/trab/vfd.c +++ b/board/trab/vfd.c @@ -39,6 +39,8 @@ #include <devices.h> #include <s3c2400.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_VFD /************************************************************************/ @@ -86,7 +88,6 @@ unsigned char bit_vfd_table[112][18][2][4][2]; */ void init_grid_ctrl(void) { - DECLARE_GLOBAL_DATA_PTR; ulong adr, grid_cycle; unsigned int bit, display; unsigned char temp, bit_nr; @@ -172,7 +173,6 @@ void init_grid_ctrl(void) */ void create_vfd_table(void) { - DECLARE_GLOBAL_DATA_PTR; unsigned long vfd_table[112][18][2][4][2]; unsigned int x, y, color, display, entry, pixel; unsigned int x_abcdef = 0; @@ -280,7 +280,6 @@ void set_vfd_pixel(unsigned char x, unsigned char y, unsigned char color, unsigned char display, unsigned char value) { - DECLARE_GLOBAL_DATA_PTR; ulong adr; unsigned char bit_nr, temp; @@ -435,8 +434,6 @@ int drv_vfd_init(void) static int vfd_init_done = 0; int vfd_inv_data = 0; - DECLARE_GLOBAL_DATA_PTR; - if (vfd_init_done != 0) return (0); vfd_init_done = 1; diff --git a/board/versatile/versatile.c b/board/versatile/versatile.c index 0274027..9d1a25e 100644 --- a/board/versatile/versatile.c +++ b/board/versatile/versatile.c @@ -35,6 +35,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + void flash__init (void); void ether__init (void); void peripheral_power_enable (void); @@ -61,9 +63,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - - /* * set clock frequency: * VERSATILE_REFCLK is 32KHz diff --git a/board/voiceblue/voiceblue.c b/board/voiceblue/voiceblue.c index 7a2d243..04093d1 100644 --- a/board/voiceblue/voiceblue.c +++ b/board/voiceblue/voiceblue.c @@ -21,10 +21,10 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0xaa; /* arch number of VoiceBlue board */ @@ -39,8 +39,6 @@ int board_init(void) int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0xff; /* Take the Ethernet controller out of reset and wait diff --git a/board/wepep250/wepep250.c b/board/wepep250/wepep250.c index 56cb855..fe4b6a9 100644 --- a/board/wepep250/wepep250.c +++ b/board/wepep250/wepep250.c @@ -23,45 +23,45 @@ #include <common.h> #include <asm/arch/pxa-regs.h> -int board_init( void ){ - DECLARE_GLOBAL_DATA_PTR; +DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_arch_number = MACH_TYPE_WEP_EP250; - gd->bd->bi_boot_params = 0xa0000000; +int board_init (void) +{ + gd->bd->bi_arch_number = MACH_TYPE_WEP_EP250; + gd->bd->bi_boot_params = 0xa0000000; /* * Setup GPIO stuff to get serial working */ #if defined( CONFIG_FFUART ) - GPDR1 = 0x80; - GAFR1_L = 0x8010; + GPDR1 = 0x80; + GAFR1_L = 0x8010; #elif defined( CONFIG_BTUART ) - GPDR1 = 0x800; - GAFR1_L = 0x900000; + GPDR1 = 0x800; + GAFR1_L = 0x900000; #endif - PSSR = 0x20; + PSSR = 0x20; - return 0; + return 0; } -int dram_init( void ){ - DECLARE_GLOBAL_DATA_PTR; - +int dram_init (void) +{ #if ( CONFIG_NR_DRAM_BANKS > 0 ) - gd->bd->bi_dram[0].start = WEP_SDRAM_1; - gd->bd->bi_dram[0].size = WEP_SDRAM_1_SIZE; + gd->bd->bi_dram[0].start = WEP_SDRAM_1; + gd->bd->bi_dram[0].size = WEP_SDRAM_1_SIZE; #endif #if ( CONFIG_NR_DRAM_BANKS > 1 ) - gd->bd->bi_dram[1].start = WEP_SDRAM_2; - gd->bd->bi_dram[1].size = WEP_SDRAM_2_SIZE; + gd->bd->bi_dram[1].start = WEP_SDRAM_2; + gd->bd->bi_dram[1].size = WEP_SDRAM_2_SIZE; #endif #if ( CONFIG_NR_DRAM_BANKS > 2 ) - gd->bd->bi_dram[2].start = WEP_SDRAM_3; - gd->bd->bi_dram[2].size = WEP_SDRAM_3_SIZE; + gd->bd->bi_dram[2].start = WEP_SDRAM_3; + gd->bd->bi_dram[2].size = WEP_SDRAM_3_SIZE; #endif #if ( CONFIG_NR_DRAM_BANKS > 3 ) - gd->bd->bi_dram[3].start = WEP_SDRAM_4; - gd->bd->bi_dram[3].size = WEP_SDRAM_4_SIZE; + gd->bd->bi_dram[3].start = WEP_SDRAM_4; + gd->bd->bi_dram[3].size = WEP_SDRAM_4_SIZE; #endif - return 0; + return 0; } diff --git a/board/xaeniax/xaeniax.c b/board/xaeniax/xaeniax.c index 26fb312..9baa457 100644 --- a/board/xaeniax/xaeniax.c +++ b/board/xaeniax/xaeniax.c @@ -30,8 +30,7 @@ #include <common.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -39,8 +38,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -63,8 +60,6 @@ int board_late_init(void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; /* gd->bd->bi_dram[1].start = PHYS_SDRAM_2;*/ diff --git a/board/xilinx/ml300/serial.c b/board/xilinx/ml300/serial.c index 19bcc6f..c204b88 100644 --- a/board/xilinx/ml300/serial.c +++ b/board/xilinx/ml300/serial.c @@ -43,6 +43,8 @@ #include <configs/ml300.h> #include "xparameters.h" +DECLARE_GLOBAL_DATA_PTR; + #define USE_CHAN1 \ ((defined XPAR_UARTNS550_0_BASEADDR) && (defined CFG_INIT_CHAN1)) #define USE_CHAN2 \ @@ -64,7 +66,6 @@ int serial_init(void) { #if USE_CHAN1 - DECLARE_GLOBAL_DATA_PTR; int clock_divisor; clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate; @@ -103,7 +104,6 @@ void serial_setbrg(void) { #if USE_CHAN1 - DECLARE_GLOBAL_DATA_PTR; int clock_divisor; clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate; diff --git a/board/xm250/xm250.c b/board/xm250/xm250.c index ef5e9da..528d323 100644 --- a/board/xm250/xm250.c +++ b/board/xm250/xm250.c @@ -28,6 +28,8 @@ #include <asm/arch/pxa-regs.h> #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* local prototypes */ @@ -61,7 +63,6 @@ int board_init (void) /**********************************************************/ { - DECLARE_GLOBAL_DATA_PTR; /* arch number of MicroSys XM250 */ gd->bd->bi_arch_number = MACH_TYPE_XM250; @@ -76,8 +77,6 @@ int dram_init (void) /**********************************************************/ { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c index bb36c96..a569b53 100644 --- a/board/xpedite1k/xpedite1k.c +++ b/board/xpedite1k/xpedite1k.c @@ -26,6 +26,8 @@ #include <spd_sdram.h> #include <i2c.h> +DECLARE_GLOBAL_DATA_PTR; + #define BOOT_SMALL_FLASH 32 /* 00100000 */ #define FLASH_ONBD_N 2 /* 00000010 */ #define FLASH_SRAM_SEL 1 /* 00000001 */ @@ -107,7 +109,7 @@ long int initdram (int board_type) long dram_size = 0; #if defined(CONFIG_SPD_EEPROM) - dram_size = spd_sdram (0); + dram_size = spd_sdram (); #else dram_size = fixed_sdram (); #endif @@ -238,8 +240,6 @@ int pci_pre_init(struct pci_controller * hose ) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose ) { - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ diff --git a/board/xsengine/xsengine.c b/board/xsengine/xsengine.c index a9919db..23d56c4 100644 --- a/board/xsengine/xsengine.c +++ b/board/xsengine/xsengine.c @@ -27,14 +27,14 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* * Miscelaneous platform dependent initialisations */ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -56,8 +56,6 @@ int board_post_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/zylonite/zylonite.c b/board/zylonite/zylonite.c index e618ab9..5829170 100644 --- a/board/zylonite/zylonite.c +++ b/board/zylonite/zylonite.c @@ -27,8 +27,7 @@ #include <common.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -36,8 +35,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -60,8 +57,6 @@ int board_late_init(void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/common/Makefile b/common/Makefile index 7dbf84a..eb0b5da 100644 --- a/common/Makefile +++ b/common/Makefile @@ -51,7 +51,7 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \ memsize.o miiphybb.o miiphyutil.o \ s_record.o serial.o soft_i2c.o soft_spi.o spartan2.o spartan3.o \ usb.o usb_kbd.o usb_storage.o \ - virtex2.o xilinx.o + virtex2.o xilinx.o crc16.o xyzModem.o OBJS = $(AOBJS) $(COBJS) diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c index 40e28dd..04fa4fa 100644 --- a/common/cmd_bdinfo.c +++ b/common/cmd_bdinfo.c @@ -28,6 +28,7 @@ #include <command.h> #include <net.h> /* for print_IPaddr */ +DECLARE_GLOBAL_DATA_PTR; #if (CONFIG_COMMANDS & CFG_CMD_BDI) static void print_num(const char *, ulong); @@ -39,8 +40,6 @@ static void print_str(const char *, const char *); int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - DECLARE_GLOBAL_DATA_PTR; - int i; bd_t *bd = gd->bd; char buf[32]; @@ -127,8 +126,6 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - DECLARE_GLOBAL_DATA_PTR; - int i; bd_t *bd = gd->bd; @@ -153,8 +150,6 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - DECLARE_GLOBAL_DATA_PTR; - int i; bd_t *bd = gd->bd; @@ -187,8 +182,6 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - DECLARE_GLOBAL_DATA_PTR; - int i; bd_t *bd = gd->bd; @@ -215,8 +208,6 @@ int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - DECLARE_GLOBAL_DATA_PTR; - int i; bd_t *bd = gd->bd; diff --git a/common/cmd_bedbug.c b/common/cmd_bedbug.c index cdb379d..48086a6 100644 --- a/common/cmd_bedbug.c +++ b/common/cmd_bedbug.c @@ -11,187 +11,183 @@ #include <bedbug/regs.h> #include <bedbug/ppc.h> +DECLARE_GLOBAL_DATA_PTR; + #if (CONFIG_COMMANDS & CFG_CMD_BEDBUG) #ifndef MAX #define MAX(a,b) ((a) > (b) ? (a) : (b)) #endif -extern void show_regs __P((struct pt_regs*)); -extern int run_command __P((const char*, int)); +extern void show_regs __P ((struct pt_regs *)); +extern int run_command __P ((const char *, int)); extern char console_buffer[]; -ulong dis_last_addr = 0; /* Last address disassembled */ -ulong dis_last_len = 20; /* Default disassembler length */ -CPU_DEBUG_CTX bug_ctx; /* Bedbug context structure */ - +ulong dis_last_addr = 0; /* Last address disassembled */ +ulong dis_last_len = 20; /* Default disassembler length */ +CPU_DEBUG_CTX bug_ctx; /* Bedbug context structure */ + /* ====================================================================== * U-Boot's puts function does not append a newline, so the bedbug stuff * will use this for the output of the dis/assembler. * ====================================================================== */ -int bedbug_puts(const char *str) +int bedbug_puts (const char *str) { - /* -------------------------------------------------- */ + /* -------------------------------------------------- */ - printf( "%s\r\n", str ); - return 0; -} /* bedbug_puts */ + printf ("%s\r\n", str); + return 0; +} /* bedbug_puts */ + - /* ====================================================================== * Initialize the bug_ctx structure used by the bedbug debugger. This is * specific to the CPU since each has different debug registers and * settings. * ====================================================================== */ -void bedbug_init( void ) +void bedbug_init (void) { - /* -------------------------------------------------- */ + /* -------------------------------------------------- */ #if defined(CONFIG_4xx) - void bedbug405_init( void ); - bedbug405_init(); + void bedbug405_init (void); + + bedbug405_init (); #elif defined(CONFIG_8xx) - void bedbug860_init( void ); - bedbug860_init(); + void bedbug860_init (void); + + bedbug860_init (); #endif #if defined(CONFIG_MPC824X) || defined(CONFIG_MPC8260) - /* Processors that are 603e core based */ - void bedbug603e_init( void ); + /* Processors that are 603e core based */ + void bedbug603e_init (void); - bedbug603e_init(); + bedbug603e_init (); #endif - return; -} /* bedbug_init */ + return; +} /* bedbug_init */ + - /* ====================================================================== * Entry point from the interpreter to the disassembler. Repeated calls * will resume from the last disassembled address. * ====================================================================== */ -int do_bedbug_dis (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_bedbug_dis (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - ulong addr; /* Address to start disassembly from */ - ulong len; /* # of instructions to disassemble */ - /* -------------------------------------------------- */ - - /* Setup to go from the last address if none is given */ - addr = dis_last_addr; - len = dis_last_len; - - if (argc < 2) - { - printf ("Usage:\n%s\n", cmdtp->usage); - return 1; - } - - if(( flag & CMD_FLAG_REPEAT ) == 0 ) - { - /* New command */ - addr = simple_strtoul( argv[1], NULL, 16 ); - - /* If an extra param is given then it is the length */ - if( argc > 2 ) - len = simple_strtoul( argv[2], NULL, 16 ); - } - - /* Run the disassembler */ - disppc( (unsigned char *)addr, 0, len, bedbug_puts, F_RADHEX ); - - dis_last_addr = addr + (len * 4); - dis_last_len = len; - return 0; -} /* do_bedbug_dis */ -U_BOOT_CMD( - ds, 3, 1, do_bedbug_dis, - "ds - disassemble memory\n", - "ds <address> [# instructions]\n" -); + ulong addr; /* Address to start disassembly from */ + ulong len; /* # of instructions to disassemble */ + + /* -------------------------------------------------- */ + + /* Setup to go from the last address if none is given */ + addr = dis_last_addr; + len = dis_last_len; + + if (argc < 2) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + if ((flag & CMD_FLAG_REPEAT) == 0) { + /* New command */ + addr = simple_strtoul (argv[1], NULL, 16); + + /* If an extra param is given then it is the length */ + if (argc > 2) + len = simple_strtoul (argv[2], NULL, 16); + } + + /* Run the disassembler */ + disppc ((unsigned char *) addr, 0, len, bedbug_puts, F_RADHEX); + + dis_last_addr = addr + (len * 4); + dis_last_len = len; + return 0; +} /* do_bedbug_dis */ + +U_BOOT_CMD (ds, 3, 1, do_bedbug_dis, + "ds - disassemble memory\n", + "ds <address> [# instructions]\n"); /* ====================================================================== * Entry point from the interpreter to the assembler. Assembles * instructions in consecutive memory locations until a '.' (period) is * entered on a line by itself. * ====================================================================== */ -int do_bedbug_asm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_bedbug_asm (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - long mem_addr; /* Address to assemble into */ - unsigned long instr; /* Machine code for text */ - char prompt[ 15 ]; /* Prompt string for user input */ - int asm_err; /* Error code from the assembler*/ - /* -------------------------------------------------- */ - int rcode = 0; - - if (argc < 2) - { - printf ("Usage:\n%s\n", cmdtp->usage); - return 1; - } - - printf( "\nEnter '.' when done\n" ); - mem_addr = simple_strtoul( argv[ 1 ], NULL, 16 ); - - while( 1 ) - { - putc( '\n' ); - disppc( (unsigned char *)mem_addr, 0, 1, bedbug_puts, F_RADHEX ); - - sprintf( prompt, "%08lx: ", mem_addr ); - readline( prompt ); - - if( console_buffer[ 0 ] && strcmp( console_buffer, "." )) - { - if(( instr = asmppc( mem_addr, console_buffer, &asm_err )) != 0 ) - { - *(unsigned long *)mem_addr = instr; - mem_addr += 4; - } - else - { - printf( "*** Error: %s ***\n", asm_error_str( asm_err )); - rcode = 1; - } - } - else - { - break; - } - } - return rcode; -} /* do_bedbug_asm */ -U_BOOT_CMD( - as, 2, 0, do_bedbug_asm, - "as - assemble memory\n", - "as <address>\n" -); + long mem_addr; /* Address to assemble into */ + unsigned long instr; /* Machine code for text */ + char prompt[15]; /* Prompt string for user input */ + int asm_err; /* Error code from the assembler */ + + /* -------------------------------------------------- */ + int rcode = 0; + + if (argc < 2) { + printf ("Usage:\n%s\n", cmdtp->usage); + return 1; + } + + printf ("\nEnter '.' when done\n"); + mem_addr = simple_strtoul (argv[1], NULL, 16); + + while (1) { + putc ('\n'); + disppc ((unsigned char *) mem_addr, 0, 1, bedbug_puts, + F_RADHEX); + + sprintf (prompt, "%08lx: ", mem_addr); + readline (prompt); + + if (console_buffer[0] && strcmp (console_buffer, ".")) { + if ((instr = + asmppc (mem_addr, console_buffer, + &asm_err)) != 0) { + *(unsigned long *) mem_addr = instr; + mem_addr += 4; + } else { + printf ("*** Error: %s ***\n", + asm_error_str (asm_err)); + rcode = 1; + } + } else { + break; + } + } + return rcode; +} /* do_bedbug_asm */ + +U_BOOT_CMD (as, 2, 0, do_bedbug_asm, + "as - assemble memory\n", "as <address>\n"); /* ====================================================================== * Used to set a break point from the interpreter. Simply calls into the * CPU-specific break point set routine. * ====================================================================== */ -int do_bedbug_break (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_bedbug_break (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - /* -------------------------------------------------- */ - if( bug_ctx.do_break ) - (*bug_ctx.do_break)( cmdtp, flag, argc, argv ); - return 0; - -} /* do_bedbug_break */ -U_BOOT_CMD( - break, 3, 0, do_bedbug_break, - "break - set or clear a breakpoint\n", - " - Set or clear a breakpoint\n" - "break <address> - Break at an address\n" - "break off <bp#> - Disable breakpoint.\n" - "break show - List breakpoints.\n" -); + /* -------------------------------------------------- */ + if (bug_ctx.do_break) + (*bug_ctx.do_break) (cmdtp, flag, argc, argv); + return 0; + +} /* do_bedbug_break */ + +U_BOOT_CMD (break, 3, 0, do_bedbug_break, + "break - set or clear a breakpoint\n", + " - Set or clear a breakpoint\n" + "break <address> - Break at an address\n" + "break off <bp#> - Disable breakpoint.\n" + "break show - List breakpoints.\n"); /* ====================================================================== * Called from the debug interrupt routine. Simply calls the CPU-specific @@ -200,16 +196,16 @@ U_BOOT_CMD( void do_bedbug_breakpoint (struct pt_regs *regs) { - /* -------------------------------------------------- */ + /* -------------------------------------------------- */ - if( bug_ctx.break_isr ) - (*bug_ctx.break_isr)( regs ); + if (bug_ctx.break_isr) + (*bug_ctx.break_isr) (regs); - return; -} /* do_bedbug_breakpoint */ + return; +} /* do_bedbug_breakpoint */ + - /* ====================================================================== * Called from the CPU-specific breakpoint handling routine. Enter a * mini main loop until the stopped flag is cleared from the breakpoint @@ -218,81 +214,77 @@ void do_bedbug_breakpoint (struct pt_regs *regs) * This handles the parts of the debugger that are common to all CPU's. * ====================================================================== */ -void bedbug_main_loop( unsigned long addr, struct pt_regs *regs ) +void bedbug_main_loop (unsigned long addr, struct pt_regs *regs) { - int len; /* Length of command line */ - int flag; /* Command flags */ - int rc = 0; /* Result from run_command*/ - char prompt_str[ 20 ]; /* Prompt string */ - static char lastcommand[ CFG_CBSIZE ] = {0}; /* previous command */ - /* -------------------------------------------------- */ + int len; /* Length of command line */ + int flag; /* Command flags */ + int rc = 0; /* Result from run_command */ + char prompt_str[20]; /* Prompt string */ + static char lastcommand[CFG_CBSIZE] = { 0 }; /* previous command */ + /* -------------------------------------------------- */ - if( bug_ctx.clear ) - (*bug_ctx.clear)( bug_ctx.current_bp ); + if (bug_ctx.clear) + (*bug_ctx.clear) (bug_ctx.current_bp); - printf( "Breakpoint %d: ", bug_ctx.current_bp ); - disppc( (unsigned char *)addr, 0, 1, bedbug_puts, F_RADHEX ); + printf ("Breakpoint %d: ", bug_ctx.current_bp); + disppc ((unsigned char *) addr, 0, 1, bedbug_puts, F_RADHEX); - bug_ctx.stopped = 1; - bug_ctx.regs = regs; + bug_ctx.stopped = 1; + bug_ctx.regs = regs; - sprintf( prompt_str, "BEDBUG.%d =>", bug_ctx.current_bp ); + sprintf (prompt_str, "BEDBUG.%d =>", bug_ctx.current_bp); - /* A miniature main loop */ - while( bug_ctx.stopped ) - { - len = readline( prompt_str ); + /* A miniature main loop */ + while (bug_ctx.stopped) { + len = readline (prompt_str); - flag = 0; /* assume no special flags for now */ + flag = 0; /* assume no special flags for now */ - if (len > 0) - strcpy( lastcommand, console_buffer ); - else if( len == 0 ) - flag |= CMD_FLAG_REPEAT; + if (len > 0) + strcpy (lastcommand, console_buffer); + else if (len == 0) + flag |= CMD_FLAG_REPEAT; - if (len == -1) - printf ("<INTERRUPT>\n"); - else - rc = run_command( lastcommand, flag ); + if (len == -1) + printf ("<INTERRUPT>\n"); + else + rc = run_command (lastcommand, flag); - if (rc <= 0) { - /* invalid command or not repeatable, forget it */ - lastcommand[0] = 0; - } - } + if (rc <= 0) { + /* invalid command or not repeatable, forget it */ + lastcommand[0] = 0; + } + } - bug_ctx.regs = NULL; - bug_ctx.current_bp = 0; + bug_ctx.regs = NULL; + bug_ctx.current_bp = 0; - return; -} /* bedbug_main_loop */ + return; +} /* bedbug_main_loop */ + - /* ====================================================================== * Interpreter command to continue from a breakpoint. Just clears the * stopped flag in the context so that the breakpoint routine will * return. * ====================================================================== */ -int do_bedbug_continue (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) - +int do_bedbug_continue (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - /* -------------------------------------------------- */ - - if( ! bug_ctx.stopped ) - { - printf( "Not at a breakpoint\n" ); - return 1; - } - - bug_ctx.stopped = 0; - return 0; -} /* do_bedbug_continue */ -U_BOOT_CMD( - continue, 1, 0, do_bedbug_continue, - "continue- continue from a breakpoint\n", - " - continue from a breakpoint.\n" -); + /* -------------------------------------------------- */ + + if (!bug_ctx.stopped) { + printf ("Not at a breakpoint\n"); + return 1; + } + + bug_ctx.stopped = 0; + return 0; +} /* do_bedbug_continue */ + +U_BOOT_CMD (continue, 1, 0, do_bedbug_continue, + "continue- continue from a breakpoint\n", + " - continue from a breakpoint.\n"); /* ====================================================================== * Interpreter command to continue to the next instruction, stepping into @@ -300,31 +292,30 @@ U_BOOT_CMD( * the address passes control to the CPU-specific set breakpoint routine * for the current breakpoint number. * ====================================================================== */ -int do_bedbug_step (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_bedbug_step (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - unsigned long addr; /* Address to stop at */ - /* -------------------------------------------------- */ - - if( ! bug_ctx.stopped ) - { - printf( "Not at a breakpoint\n" ); - return 1; - } - - if( !find_next_address( (unsigned char *)&addr, FALSE, bug_ctx.regs )) - return 1; - - if( bug_ctx.set ) - (*bug_ctx.set)( bug_ctx.current_bp, addr ); - - bug_ctx.stopped = 0; - return 0; -} /* do_bedbug_step */ -U_BOOT_CMD( - step, 1, 1, do_bedbug_step, - "step - single step execution.\n", - " - single step execution.\n" -); + unsigned long addr; /* Address to stop at */ + + /* -------------------------------------------------- */ + + if (!bug_ctx.stopped) { + printf ("Not at a breakpoint\n"); + return 1; + } + + if (!find_next_address ((unsigned char *) &addr, FALSE, bug_ctx.regs)) + return 1; + + if (bug_ctx.set) + (*bug_ctx.set) (bug_ctx.current_bp, addr); + + bug_ctx.stopped = 0; + return 0; +} /* do_bedbug_step */ + +U_BOOT_CMD (step, 1, 1, do_bedbug_step, + "step - single step execution.\n", + " - single step execution.\n"); /* ====================================================================== * Interpreter command to continue to the next instruction, stepping over @@ -332,105 +323,97 @@ U_BOOT_CMD( * the address passes control to the CPU-specific set breakpoint routine * for the current breakpoint number. * ====================================================================== */ -int do_bedbug_next (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_bedbug_next (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - unsigned long addr; /* Address to stop at */ - /* -------------------------------------------------- */ - - if( ! bug_ctx.stopped ) - { - printf( "Not at a breakpoint\n" ); - return 1; - } - - if( !find_next_address( (unsigned char *)&addr, TRUE, bug_ctx.regs )) - return 1; - - if( bug_ctx.set ) - (*bug_ctx.set)( bug_ctx.current_bp, addr ); - - bug_ctx.stopped = 0; - return 0; -} /* do_bedbug_next */ -U_BOOT_CMD( - next, 1, 1, do_bedbug_next, - "next - single step execution, stepping over subroutines.\n", - " - single step execution, stepping over subroutines.\n" -); + unsigned long addr; /* Address to stop at */ + + /* -------------------------------------------------- */ + + if (!bug_ctx.stopped) { + printf ("Not at a breakpoint\n"); + return 1; + } + + if (!find_next_address ((unsigned char *) &addr, TRUE, bug_ctx.regs)) + return 1; + + if (bug_ctx.set) + (*bug_ctx.set) (bug_ctx.current_bp, addr); + + bug_ctx.stopped = 0; + return 0; +} /* do_bedbug_next */ + +U_BOOT_CMD (next, 1, 1, do_bedbug_next, + "next - single step execution, stepping over subroutines.\n", + " - single step execution, stepping over subroutines.\n"); /* ====================================================================== * Interpreter command to print the current stack. This assumes an EABI * architecture, so it starts with GPR R1 and works back up the stack. * ====================================================================== */ -int do_bedbug_stack (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_bedbug_stack (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - DECLARE_GLOBAL_DATA_PTR; - - unsigned long sp; /* Stack pointer */ - unsigned long func; /* LR from stack */ - int depth; /* Stack iteration level */ - int skip = 1; /* Flag to skip the first entry */ - unsigned long top; /* Top of memory address */ - /* -------------------------------------------------- */ - - if( ! bug_ctx.stopped ) - { - printf( "Not at a breakpoint\n" ); - return 1; - } - - top = gd->bd->bi_memstart + gd->bd->bi_memsize; - depth = 0; - - printf( "Depth PC\n" ); - printf( "----- --------\n" ); - printf( "%5d %08lx\n", depth++, bug_ctx.regs->nip ); - - sp = bug_ctx.regs->gpr[ 1 ]; - func = *(unsigned long *)(sp+4); - - while(( func < top ) && ( sp < top )) - { - if( !skip ) - printf( "%5d %08lx\n", depth++, func ); - else - --skip; - - sp = *(unsigned long *)sp; - func = *(unsigned long *)(sp+4); - } - return 0; -} /* do_bedbug_stack */ -U_BOOT_CMD( - where, 1, 1, do_bedbug_stack, - "where - Print the running stack.\n", - " - Print the running stack.\n" -); + unsigned long sp; /* Stack pointer */ + unsigned long func; /* LR from stack */ + int depth; /* Stack iteration level */ + int skip = 1; /* Flag to skip the first entry */ + unsigned long top; /* Top of memory address */ + + /* -------------------------------------------------- */ + + if (!bug_ctx.stopped) { + printf ("Not at a breakpoint\n"); + return 1; + } + + top = gd->bd->bi_memstart + gd->bd->bi_memsize; + depth = 0; + + printf ("Depth PC\n"); + printf ("----- --------\n"); + printf ("%5d %08lx\n", depth++, bug_ctx.regs->nip); + + sp = bug_ctx.regs->gpr[1]; + func = *(unsigned long *) (sp + 4); + + while ((func < top) && (sp < top)) { + if (!skip) + printf ("%5d %08lx\n", depth++, func); + else + --skip; + + sp = *(unsigned long *) sp; + func = *(unsigned long *) (sp + 4); + } + return 0; +} /* do_bedbug_stack */ + +U_BOOT_CMD (where, 1, 1, do_bedbug_stack, + "where - Print the running stack.\n", + " - Print the running stack.\n"); /* ====================================================================== * Interpreter command to dump the registers. Calls the CPU-specific * show registers routine. * ====================================================================== */ -int do_bedbug_rdump (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) +int do_bedbug_rdump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { - /* -------------------------------------------------- */ - - if( ! bug_ctx.stopped ) - { - printf( "Not at a breakpoint\n" ); - return 1; - } - - show_regs( bug_ctx.regs ); - return 0; -} /* do_bedbug_rdump */ -U_BOOT_CMD( - rdump, 1, 1, do_bedbug_rdump, - "rdump - Show registers.\n", - " - Show registers.\n" -); + /* -------------------------------------------------- */ + + if (!bug_ctx.stopped) { + printf ("Not at a breakpoint\n"); + return 1; + } + + show_regs (bug_ctx.regs); + return 0; +} /* do_bedbug_rdump */ + +U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump, + "rdump - Show registers.\n", " - Show registers.\n"); /* ====================================================================== */ -#endif /* CFG_CMD_BEDBUG */ +#endif /* CFG_CMD_BEDBUG */ /* diff --git a/common/cmd_boot.c b/common/cmd_boot.c index 5b58d4e..e68f16f 100644 --- a/common/cmd_boot.c +++ b/common/cmd_boot.c @@ -28,14 +28,12 @@ #include <command.h> #include <net.h> - -/* -------------------------------------------------------------------- */ +#if defined(CONFIG_I386) +DECLARE_GLOBAL_DATA_PTR; +#endif int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { -#if defined(CONFIG_I386) - DECLARE_GLOBAL_DATA_PTR; -#endif ulong addr, rc; int rcode = 0; diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index aeb7842..fdf7180 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -38,6 +38,8 @@ #include <ft_build.h> #endif +DECLARE_GLOBAL_DATA_PTR; + /*cmd_boot.c*/ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); @@ -469,7 +471,6 @@ U_BOOT_CMD( static void fixup_silent_linux () { - DECLARE_GLOBAL_DATA_PTR; char buf[256], *start, *end; char *cmdline = getenv ("bootargs"); @@ -512,8 +513,6 @@ do_bootm_linux (cmd_tbl_t *cmdtp, int flag, ulong *len_ptr, int verify) { - DECLARE_GLOBAL_DATA_PTR; - ulong sp; ulong len, checksum; ulong initrd_start, initrd_end; @@ -856,8 +855,6 @@ do_bootm_netbsd (cmd_tbl_t *cmdtp, int flag, ulong *len_ptr, int verify) { - DECLARE_GLOBAL_DATA_PTR; - image_header_t *hdr = &header; void (*loader)(bd_t *, image_header_t *, char *, char *); @@ -941,7 +938,6 @@ do_bootm_artos (cmd_tbl_t *cmdtp, int flag, ulong *len_ptr, int verify) { - DECLARE_GLOBAL_DATA_PTR; ulong top; char *s, *cmdline; char **fwenv, **ss; @@ -1370,7 +1366,6 @@ static void do_bootm_rtems (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], ulong addr, ulong *len_ptr, int verify) { - DECLARE_GLOBAL_DATA_PTR; image_header_t *hdr = &header; void (*entry_point)(bd_t *); diff --git a/common/cmd_date.c b/common/cmd_date.c index a569d78..84932f7 100644 --- a/common/cmd_date.c +++ b/common/cmd_date.c @@ -28,6 +28,8 @@ #include <command.h> #include <rtc.h> +DECLARE_GLOBAL_DATA_PTR; + #if (CONFIG_COMMANDS & CFG_CMD_DATE) const char *weekdays[] = { @@ -40,7 +42,6 @@ int mk_date (char *, struct rtc_time *); int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - DECLARE_GLOBAL_DATA_PTR; struct rtc_time tm; int rcode = 0; diff --git a/common/cmd_elf.c b/common/cmd_elf.c index eccf2e9..1d92bb3 100644 --- a/common/cmd_elf.c +++ b/common/cmd_elf.c @@ -19,6 +19,9 @@ #include <net.h> #include <elf.h> +#if defined(CONFIG_WALNUT) || defined(CFG_VXWORKS_MAC_PTR) +DECLARE_GLOBAL_DATA_PTR; +#endif #if (CONFIG_COMMANDS & CFG_CMD_ELF) @@ -78,11 +81,6 @@ int do_bootelf (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) * ====================================================================== */ int do_bootvx ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { -#if defined(CONFIG_WALNUT) || \ - defined(CFG_VXWORKS_MAC_PTR) - DECLARE_GLOBAL_DATA_PTR; -#endif - unsigned long addr; /* Address of image */ unsigned long bootaddr; /* Address to put the bootline */ char *bootline; /* Text of the bootline */ diff --git a/common/cmd_flash.c b/common/cmd_flash.c index 0aa4783..201f4e3 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -455,6 +455,7 @@ int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #ifdef CONFIG_HAS_DATAFLASH int status; #endif + if (argc < 3) { printf ("Usage:\n%s\n", cmdtp->usage); return 1; @@ -655,10 +656,10 @@ int flash_sect_protect (int p, ulong addr_first, ulong addr_last) #endif /* CFG_FLASH_PROTECTION */ } } + } #if defined(CFG_FLASH_PROTECTION) - if (!rcode) putc ('\n'); + puts (" done\n"); #endif /* CFG_FLASH_PROTECTION */ - } printf ("%sProtected %d sectors\n", p ? "" : "Un-", protected); diff --git a/common/cmd_ide.c b/common/cmd_ide.c index b67d35a..41621ba 100644 --- a/common/cmd_ide.c +++ b/common/cmd_ide.c @@ -60,6 +60,10 @@ unsigned long mips_io_port_base = 0; # define SHOW_BOOT_PROGRESS(arg) #endif +#ifdef CONFIG_IDE_8xx_DIRECT +DECLARE_GLOBAL_DATA_PTR; +#endif + #ifdef __PPC__ # define EIEIO __asm__ volatile ("eieio") # define SYNC __asm__ volatile ("sync") @@ -498,7 +502,6 @@ void ide_init (void) { #ifdef CONFIG_IDE_8xx_DIRECT - DECLARE_GLOBAL_DATA_PTR; volatile immap_t *immr = (immap_t *)CFG_IMMR; volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia); #endif diff --git a/common/cmd_immap.c b/common/cmd_immap.c index 559d7b4..fa79b45 100644 --- a/common/cmd_immap.c +++ b/common/cmd_immap.c @@ -41,6 +41,10 @@ #include <asm/iopin_8260.h> #endif +#if defined(CONFIG_8xx) || defined(CONFIG_8260) +DECLARE_GLOBAL_DATA_PTR; +#endif + static void unimplemented ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { @@ -450,10 +454,8 @@ static void prbrg (int n, uint val) uint div16 = (val & CPM_BRG_DIV16) != 0; #if defined(CONFIG_8xx) - DECLARE_GLOBAL_DATA_PTR; ulong clock = gd->cpu_clk; #elif defined(CONFIG_8260) - DECLARE_GLOBAL_DATA_PTR; ulong clock = gd->brg_clk; #endif diff --git a/common/cmd_load.c b/common/cmd_load.c index 7498497..31fef81 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -29,10 +29,13 @@ #include <s_record.h> #include <net.h> #include <exports.h> +#include <xyzModem.h> +DECLARE_GLOBAL_DATA_PTR; #if (CONFIG_COMMANDS & CFG_CMD_LOADS) static ulong load_serial (ulong offset); +static ulong load_serial_ymodem (ulong offset); static int read_record (char *buf, ulong len); # if (CONFIG_COMMANDS & CFG_CMD_SAVES) static int save_serial (ulong offset, ulong size); @@ -53,7 +56,6 @@ int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) char *env_echo; int rcode = 0; #ifdef CFG_LOADS_BAUD_CHANGE - DECLARE_GLOBAL_DATA_PTR; int load_baudrate, current_baudrate; load_baudrate = current_baudrate = gd->baudrate; @@ -213,7 +215,6 @@ load_serial (ulong offset) static int read_record (char *buf, ulong len) { - DECLARE_GLOBAL_DATA_PTR; char *p; char c; @@ -256,7 +257,6 @@ int do_save_serial (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) ulong offset = 0; ulong size = 0; #ifdef CFG_LOADS_BAUD_CHANGE - DECLARE_GLOBAL_DATA_PTR; int save_baudrate, current_baudrate; save_baudrate = current_baudrate = gd->baudrate; @@ -433,8 +433,6 @@ char his_quote; /* quote chars he'll use */ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - DECLARE_GLOBAL_DATA_PTR; - ulong offset = 0; ulong addr; int load_baudrate, current_baudrate; @@ -475,21 +473,31 @@ int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) } } - printf ("## Ready for binary (kermit) download " - "to 0x%08lX at %d bps...\n", - offset, - load_baudrate); - addr = load_serial_bin (offset); + if (strcmp(argv[0],"loady")==0) { + printf ("## Ready for binary (ymodem) download " + "to 0x%08lX at %d bps...\n", + offset, + load_baudrate); + + addr = load_serial_ymodem (offset); - if (addr == ~0) { - load_addr = 0; - printf ("## Binary (kermit) download aborted\n"); - rcode = 1; } else { - printf ("## Start Addr = 0x%08lX\n", addr); - load_addr = addr; - } + printf ("## Ready for binary (kermit) download " + "to 0x%08lX at %d bps...\n", + offset, + load_baudrate); + addr = load_serial_bin (offset); + + if (addr == ~0) { + load_addr = 0; + printf ("## Binary (kermit) download aborted\n"); + rcode = 1; + } else { + printf ("## Start Addr = 0x%08lX\n", addr); + load_addr = addr; + } + } if (load_baudrate != current_baudrate) { printf ("## Switch baudrate to %d bps and press ESC ...\n", current_baudrate); @@ -963,6 +971,66 @@ START: } return ((ulong) os_data_addr - (ulong) bin_start_address); } + +static int getcxmodem(void) { + if (tstc()) + return (getc()); + return -1; +} +static ulong load_serial_ymodem (ulong offset) +{ + int size; + char buf[32]; + int err; + int res; + connection_info_t info; + char ymodemBuf[1024]; + ulong store_addr = ~0; + ulong addr = 0; + + size=0; + info.mode=xyzModem_ymodem; + res=xyzModem_stream_open(&info, &err); + if (!res) { + + while ((res=xyzModem_stream_read(ymodemBuf, 1024, &err)) > 0 ){ + store_addr = addr + offset; + size+=res; + addr+=res; +#ifndef CFG_NO_FLASH + if (addr2info(store_addr)) { + int rc; + + rc = flash_write((char *)ymodemBuf,store_addr,res); + if (rc != 0) { + flash_perror (rc); + return (~0); + } + } else +#endif + { + memcpy ((char *)(store_addr), ymodemBuf, res); + } + + } + } + else { + printf ("%s\n",xyzModem_error(err)); + } + + xyzModem_stream_close(&err); + xyzModem_stream_terminate(false,&getcxmodem); + + + flush_cache (offset, size); + + printf("## Total Size = 0x%08x = %d Bytes\n", size, size); + sprintf(buf, "%X", size); + setenv("filesize", buf); + + return offset; +} + #endif /* CFG_CMD_LOADB */ /* -------------------------------------------------------------------- */ @@ -1022,6 +1090,14 @@ U_BOOT_CMD( " with offset 'off' and baudrate 'baud'\n" ); +U_BOOT_CMD( + loady, 3, 0, do_load_serial_bin, + "loady - load binary file over serial line (ymodem mode)\n", + "[ off ] [ baud ]\n" + " - load binary file over serial line" + " with offset 'off' and baudrate 'baud'\n" +); + #endif /* CFG_CMD_LOADB */ /* -------------------------------------------------------------------- */ diff --git a/common/cmd_log.c b/common/cmd_log.c index efc9689..042a403 100644 --- a/common/cmd_log.c +++ b/common/cmd_log.c @@ -46,6 +46,8 @@ #include <post.h> #include <logbuff.h> +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_LOGBUFFER) /* Local prototypes */ @@ -73,7 +75,6 @@ static unsigned long *ext_logged_chars; in linux/kernel/printk */ void logbuff_init_ptrs (void) { - DECLARE_GLOBAL_DATA_PTR; unsigned long *ext_tag; unsigned long post_word; char *s; @@ -139,8 +140,6 @@ static void logbuff_puts (const char *s) void logbuff_log(char *msg) { - DECLARE_GLOBAL_DATA_PTR; - if ((gd->post_log_word & LOGBUFF_INITIALIZED)) { logbuff_printk (msg); } else { diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index ecf1db4..6257fbd 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -50,6 +50,8 @@ #include <net.h> #endif +DECLARE_GLOBAL_DATA_PTR; + #if !defined(CFG_ENV_IS_IN_NVRAM) && \ !defined(CFG_ENV_IS_IN_EEPROM) && \ !defined(CFG_ENV_IS_IN_FLASH) && \ @@ -152,8 +154,6 @@ int do_printenv (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) int _do_setenv (int flag, int argc, char *argv[]) { - DECLARE_GLOBAL_DATA_PTR; - int i, len, oldval; int console = -1; uchar *env, *nxt = NULL; diff --git a/common/console.c b/common/console.c index 3c535d2..e9f23be 100644 --- a/common/console.c +++ b/common/console.c @@ -27,6 +27,8 @@ #include <console.h> #include <exports.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_AMIGAONEG3SE int console_changed = 0; #endif @@ -48,7 +50,6 @@ extern int overwrite_console (void); static int console_setfile (int file, device_t * dev) { - DECLARE_GLOBAL_DATA_PTR; int error = 0; if (dev == NULL) @@ -161,8 +162,6 @@ void fprintf (int file, const char *fmt, ...) int getc (void) { - DECLARE_GLOBAL_DATA_PTR; - if (gd->flags & GD_FLG_DEVINIT) { /* Get from the standard input */ return fgetc (stdin); @@ -174,8 +173,6 @@ int getc (void) int tstc (void) { - DECLARE_GLOBAL_DATA_PTR; - if (gd->flags & GD_FLG_DEVINIT) { /* Test the standard input */ return ftstc (stdin); @@ -187,8 +184,6 @@ int tstc (void) void putc (const char c) { - DECLARE_GLOBAL_DATA_PTR; - #ifdef CONFIG_SILENT_CONSOLE if (gd->flags & GD_FLG_SILENT) return; @@ -205,8 +200,6 @@ void putc (const char c) void puts (const char *s) { - DECLARE_GLOBAL_DATA_PTR; - #ifdef CONFIG_SILENT_CONSOLE if (gd->flags & GD_FLG_SILENT) return; @@ -258,8 +251,6 @@ static int ctrlc_disabled = 0; /* see disable_ctrl() */ static int ctrlc_was_pressed = 0; int ctrlc (void) { - DECLARE_GLOBAL_DATA_PTR; - if (!ctrlc_disabled && gd->have_console) { if (tstc ()) { switch (getc ()) { @@ -370,8 +361,6 @@ int console_assign (int file, char *devname) /* Called before relocation - use serial functions */ int console_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->have_console = 1; #ifdef CONFIG_SILENT_CONSOLE @@ -407,7 +396,6 @@ device_t *search_device (int flags, char *name) /* Called after the relocation - use desired console functions */ int console_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; char *stdinname, *stdoutname, *stderrname; device_t *inputdev = NULL, *outputdev = NULL, *errdev = NULL; #ifdef CFG_CONSOLE_ENV_OVERWRITE @@ -499,8 +487,6 @@ int console_init_r (void) /* Called after the relocation - use desired console functions */ int console_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - device_t *inputdev = NULL, *outputdev = NULL; int i, items = ListNumItems (devlist); diff --git a/common/crc16.c b/common/crc16.c new file mode 100644 index 0000000..d571405 --- /dev/null +++ b/common/crc16.c @@ -0,0 +1,106 @@ +//========================================================================== +// +// crc16.c +// +// 16 bit CRC with polynomial x^16+x^12+x^5+1 +// +//========================================================================== +//####ECOSGPLCOPYRIGHTBEGIN#### +// ------------------------------------------- +// This file is part of eCos, the Embedded Configurable Operating System. +// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +// Copyright (C) 2002 Gary Thomas +// +// eCos is free software; you can redistribute it and/or modify it under +// the terms of the GNU General Public License as published by the Free +// Software Foundation; either version 2 or (at your option) any later version. +// +// eCos is distributed in the hope that it will be useful, but WITHOUT ANY +// WARRANTY; without even the implied warranty of MERCHANTABILITY or +// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +// for more details. +// +// You should have received a copy of the GNU General Public License along +// with eCos; if not, write to the Free Software Foundation, Inc., +// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. +// +// As a special exception, if other files instantiate templates or use macros +// or inline functions from this file, or you compile this file and link it +// with other works to produce a work based on this file, this file does not +// by itself cause the resulting work to be covered by the GNU General Public +// License. However the source code for this file must still be made available +// in accordance with section (3) of the GNU General Public License. +// +// This exception does not invalidate any other reasons why a work based on +// this file might be covered by the GNU General Public License. +// +// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. +// at http://sources.redhat.com/ecos/ecos-license/ +// ------------------------------------------- +//####ECOSGPLCOPYRIGHTEND#### +//========================================================================== +//#####DESCRIPTIONBEGIN#### +// +// Author(s): gthomas +// Contributors: gthomas,asl +// Date: 2001-01-31 +// Purpose: +// Description: +// +// This code is part of eCos (tm). +// +//####DESCRIPTIONEND#### +// +//========================================================================== + +#include "crc.h" + +// Table of CRC constants - implements x^16+x^12+x^5+1 +static const uint16_t crc16_tab[] = { + 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50a5, 0x60c6, 0x70e7, + 0x8108, 0x9129, 0xa14a, 0xb16b, 0xc18c, 0xd1ad, 0xe1ce, 0xf1ef, + 0x1231, 0x0210, 0x3273, 0x2252, 0x52b5, 0x4294, 0x72f7, 0x62d6, + 0x9339, 0x8318, 0xb37b, 0xa35a, 0xd3bd, 0xc39c, 0xf3ff, 0xe3de, + 0x2462, 0x3443, 0x0420, 0x1401, 0x64e6, 0x74c7, 0x44a4, 0x5485, + 0xa56a, 0xb54b, 0x8528, 0x9509, 0xe5ee, 0xf5cf, 0xc5ac, 0xd58d, + 0x3653, 0x2672, 0x1611, 0x0630, 0x76d7, 0x66f6, 0x5695, 0x46b4, + 0xb75b, 0xa77a, 0x9719, 0x8738, 0xf7df, 0xe7fe, 0xd79d, 0xc7bc, + 0x48c4, 0x58e5, 0x6886, 0x78a7, 0x0840, 0x1861, 0x2802, 0x3823, + 0xc9cc, 0xd9ed, 0xe98e, 0xf9af, 0x8948, 0x9969, 0xa90a, 0xb92b, + 0x5af5, 0x4ad4, 0x7ab7, 0x6a96, 0x1a71, 0x0a50, 0x3a33, 0x2a12, + 0xdbfd, 0xcbdc, 0xfbbf, 0xeb9e, 0x9b79, 0x8b58, 0xbb3b, 0xab1a, + 0x6ca6, 0x7c87, 0x4ce4, 0x5cc5, 0x2c22, 0x3c03, 0x0c60, 0x1c41, + 0xedae, 0xfd8f, 0xcdec, 0xddcd, 0xad2a, 0xbd0b, 0x8d68, 0x9d49, + 0x7e97, 0x6eb6, 0x5ed5, 0x4ef4, 0x3e13, 0x2e32, 0x1e51, 0x0e70, + 0xff9f, 0xefbe, 0xdfdd, 0xcffc, 0xbf1b, 0xaf3a, 0x9f59, 0x8f78, + 0x9188, 0x81a9, 0xb1ca, 0xa1eb, 0xd10c, 0xc12d, 0xf14e, 0xe16f, + 0x1080, 0x00a1, 0x30c2, 0x20e3, 0x5004, 0x4025, 0x7046, 0x6067, + 0x83b9, 0x9398, 0xa3fb, 0xb3da, 0xc33d, 0xd31c, 0xe37f, 0xf35e, + 0x02b1, 0x1290, 0x22f3, 0x32d2, 0x4235, 0x5214, 0x6277, 0x7256, + 0xb5ea, 0xa5cb, 0x95a8, 0x8589, 0xf56e, 0xe54f, 0xd52c, 0xc50d, + 0x34e2, 0x24c3, 0x14a0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405, + 0xa7db, 0xb7fa, 0x8799, 0x97b8, 0xe75f, 0xf77e, 0xc71d, 0xd73c, + 0x26d3, 0x36f2, 0x0691, 0x16b0, 0x6657, 0x7676, 0x4615, 0x5634, + 0xd94c, 0xc96d, 0xf90e, 0xe92f, 0x99c8, 0x89e9, 0xb98a, 0xa9ab, + 0x5844, 0x4865, 0x7806, 0x6827, 0x18c0, 0x08e1, 0x3882, 0x28a3, + 0xcb7d, 0xdb5c, 0xeb3f, 0xfb1e, 0x8bf9, 0x9bd8, 0xabbb, 0xbb9a, + 0x4a75, 0x5a54, 0x6a37, 0x7a16, 0x0af1, 0x1ad0, 0x2ab3, 0x3a92, + 0xfd2e, 0xed0f, 0xdd6c, 0xcd4d, 0xbdaa, 0xad8b, 0x9de8, 0x8dc9, + 0x7c26, 0x6c07, 0x5c64, 0x4c45, 0x3ca2, 0x2c83, 0x1ce0, 0x0cc1, + 0xef1f, 0xff3e, 0xcf5d, 0xdf7c, 0xaf9b, 0xbfba, 0x8fd9, 0x9ff8, + 0x6e17, 0x7e36, 0x4e55, 0x5e74, 0x2e93, 0x3eb2, 0x0ed1, 0x1ef0, +}; + +uint16_t +cyg_crc16(unsigned char *buf, int len) +{ + int i; + uint16_t cksum; + + cksum = 0; + for (i = 0; i < len; i++) { + cksum = crc16_tab[((cksum>>8) ^ *buf++) & 0xFF] ^ (cksum << 8); + } + return cksum; +} + diff --git a/common/devices.c b/common/devices.c index bd4dfa0..ddf8f8e 100644 --- a/common/devices.c +++ b/common/devices.c @@ -34,6 +34,8 @@ #include <i2c.h> #endif +DECLARE_GLOBAL_DATA_PTR; + list_t devlist = 0; device_t *stdio_devices[] = { NULL, NULL, NULL }; char *stdio_names[MAX_FILES] = { "stdin", "stdout", "stderr" }; @@ -160,8 +162,6 @@ int device_deregister(char *devname) int devices_init (void) { #ifndef CONFIG_ARM /* already relocated for current ARM implementation */ - DECLARE_GLOBAL_DATA_PTR; - ulong relocation_offset = gd->reloc_off; int i; diff --git a/common/dlmalloc.c b/common/dlmalloc.c index 0c04872..20c2069 100644 --- a/common/dlmalloc.c +++ b/common/dlmalloc.c @@ -949,6 +949,8 @@ void malloc_stats(); #endif /* 0 */ /* Moved to malloc.h */ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* Emulation of sbrk for WIN32 All code within the ifdef WIN32 is untested by me. @@ -1493,8 +1495,6 @@ static mbinptr av_[NAV * 2 + 2] = { void malloc_bin_reloc (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long *p = (unsigned long *)(&av_[2]); int i; for (i=2; i<(sizeof(av_)/sizeof(mbinptr)); ++i) { diff --git a/common/env_common.c b/common/env_common.c index 3201135..eb33422 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -37,6 +37,8 @@ # define SHOW_BOOT_PROGRESS(arg) #endif +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_AMIGAONEG3SE extern void enable_nvram(void); extern void disable_nvram(void); @@ -150,7 +152,6 @@ void env_crc_update (void) static uchar env_get_char_init (int index) { - DECLARE_GLOBAL_DATA_PTR; uchar c; /* if crc was bad, use the default environment */ @@ -167,7 +168,6 @@ static uchar env_get_char_init (int index) #ifdef CONFIG_AMIGAONEG3SE uchar env_get_char_memory (int index) { - DECLARE_GLOBAL_DATA_PTR; uchar retval; enable_nvram(); if (gd->env_valid) { @@ -181,8 +181,6 @@ uchar env_get_char_memory (int index) #else uchar env_get_char_memory (int index) { - DECLARE_GLOBAL_DATA_PTR; - if (gd->env_valid) { return ( *((uchar *)(gd->env_addr + index)) ); } else { @@ -193,8 +191,6 @@ uchar env_get_char_memory (int index) uchar *env_get_addr (int index) { - DECLARE_GLOBAL_DATA_PTR; - if (gd->env_valid) { return ( ((uchar *)(gd->env_addr + index)) ); } else { @@ -204,8 +200,6 @@ uchar *env_get_addr (int index) void env_relocate (void) { - DECLARE_GLOBAL_DATA_PTR; - DEBUGF ("%s[%d] offset = 0x%lx\n", __FUNCTION__,__LINE__, gd->reloc_off); diff --git a/common/env_dataflash.c b/common/env_dataflash.c index 8834da0..93fff29 100644 --- a/common/env_dataflash.c +++ b/common/env_dataflash.c @@ -26,6 +26,8 @@ #include <linux/stddef.h> #include <dataflash.h> +DECLARE_GLOBAL_DATA_PTR; + env_t *env_ptr = NULL; char * env_name_spec = "dataflash"; @@ -68,8 +70,6 @@ int i; */ int env_init(void) { - DECLARE_GLOBAL_DATA_PTR; - ulong crc, len, new; unsigned off; uchar buf[64]; diff --git a/common/env_eeprom.c b/common/env_eeprom.c index 50c623e..2adc129 100644 --- a/common/env_eeprom.c +++ b/common/env_eeprom.c @@ -32,6 +32,8 @@ #include <environment.h> #include <linux/stddef.h> +DECLARE_GLOBAL_DATA_PTR; + env_t *env_ptr = NULL; char * env_name_spec = "EEPROM"; @@ -75,8 +77,6 @@ int saveenv(void) */ int env_init(void) { - DECLARE_GLOBAL_DATA_PTR; - ulong crc, len, new; unsigned off; uchar buf[64]; diff --git a/common/env_flash.c b/common/env_flash.c index a2ea9c4..1674b30 100644 --- a/common/env_flash.c +++ b/common/env_flash.c @@ -35,6 +35,8 @@ #include <linux/stddef.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; + #if ((CONFIG_COMMANDS&(CFG_CMD_ENV|CFG_CMD_FLASH)) == (CFG_CMD_ENV|CFG_CMD_FLASH)) #define CMD_SAVEENV #elif defined(CFG_ENV_ADDR_REDUND) @@ -89,8 +91,6 @@ extern int default_environment_size; uchar env_get_char_spec (int index) { - DECLARE_GLOBAL_DATA_PTR; - return ( *((uchar *)(gd->env_addr + index)) ); } @@ -98,7 +98,6 @@ uchar env_get_char_spec (int index) int env_init(void) { - DECLARE_GLOBAL_DATA_PTR; int crc1_ok = 0, crc2_ok = 0; uchar flag1 = flash_addr->flags; @@ -260,7 +259,6 @@ Done: int env_init(void) { - DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_OMAP2420H4 int flash_probe(void); @@ -358,8 +356,6 @@ void env_relocate_spec (void) { #if !defined(ENV_IS_EMBEDDED) || defined(CFG_ENV_ADDR_REDUND) #ifdef CFG_ENV_ADDR_REDUND - DECLARE_GLOBAL_DATA_PTR; - if (gd->env_addr != (ulong)&(flash_addr->data)) { env_t * etmp = flash_addr; ulong ltmp = end_addr; diff --git a/common/env_nand.c b/common/env_nand.c index dd27f7b..0a05b09 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -36,21 +36,19 @@ #include <command.h> #include <environment.h> #include <linux/stddef.h> +#include <malloc.h> #include <nand.h> #if ((CONFIG_COMMANDS&(CFG_CMD_ENV|CFG_CMD_NAND)) == (CFG_CMD_ENV|CFG_CMD_NAND)) #define CMD_SAVEENV +#elif defined(CFG_ENV_OFFSET_REDUND) +#error Cannot use CFG_ENV_OFFSET_REDUND without CFG_CMD_ENV & CFG_CMD_NAND #endif -#if defined(CFG_ENV_SIZE_REDUND) -#error CFG_ENV_SIZE_REDUND not supported yet +#if defined(CFG_ENV_SIZE_REDUND) && (CFG_ENV_SIZE_REDUND != CFG_ENV_SIZE) +#error CFG_ENV_SIZE_REDUND should be the same as CFG_ENV_SIZE #endif -#if defined(CFG_ENV_ADDR_REDUND) -#error CFG_ENV_ADDR_REDUND and CFG_ENV_IS_IN_NAND not supported yet -#endif - - #ifdef CONFIG_INFERNO #error CONFIG_INFERNO not supported yet #endif @@ -80,11 +78,10 @@ env_t *env_ptr = 0; /* local functions */ static void use_default(void); +DECLARE_GLOBAL_DATA_PTR; uchar env_get_char_spec (int index) { - DECLARE_GLOBAL_DATA_PTR; - return ( *((uchar *)(gd->env_addr + index)) ); } @@ -97,9 +94,7 @@ uchar env_get_char_spec (int index) */ int env_init(void) { - DECLARE_GLOBAL_DATA_PTR; - - gd->env_addr = (ulong)&default_environment[0]; + gd->env_addr = (ulong)&default_environment[0]; gd->env_valid = 1; return (0); @@ -110,6 +105,41 @@ int env_init(void) * The legacy NAND code saved the environment in the first NAND device i.e., * nand_dev_desc + 0. This is also the behaviour using the new NAND code. */ +#ifdef CFG_ENV_OFFSET_REDUND +int saveenv(void) +{ + ulong total; + int ret = 0; + + env_ptr->flags++; + total = CFG_ENV_SIZE; + + if(gd->env_valid == 1) { + puts ("Erasing redundant Nand..."); + if (nand_erase(&nand_info[0], + CFG_ENV_OFFSET_REDUND, CFG_ENV_SIZE)) + return 1; + puts ("Writing to redundant Nand... "); + ret = nand_write(&nand_info[0], CFG_ENV_OFFSET_REDUND, &total, + (u_char*) env_ptr); + } else { + puts ("Erasing Nand..."); + if (nand_erase(&nand_info[0], + CFG_ENV_OFFSET, CFG_ENV_SIZE)) + return 1; + + puts ("Writing to Nand... "); + ret = nand_write(&nand_info[0], CFG_ENV_OFFSET, &total, + (u_char*) env_ptr); + } + if (ret || total != CFG_ENV_SIZE) + return 1; + + puts ("done\n"); + gd->env_valid = (gd->env_valid == 2 ? 1 : 2); + return ret; +} +#else /* ! CFG_ENV_OFFSET_REDUND */ int saveenv(void) { ulong total; @@ -128,9 +158,63 @@ int saveenv(void) puts ("done\n"); return ret; } +#endif /* CFG_ENV_OFFSET_REDUND */ #endif /* CMD_SAVEENV */ +#ifdef CFG_ENV_OFFSET_REDUND +void env_relocate_spec (void) +{ +#if !defined(ENV_IS_EMBEDDED) + ulong total; + int crc1_ok = 0, crc2_ok = 0; + env_t *tmp_env1, *tmp_env2; + + total = CFG_ENV_SIZE; + + tmp_env1 = (env_t *) malloc(CFG_ENV_SIZE); + tmp_env2 = (env_t *) malloc(CFG_ENV_SIZE); + + nand_read(&nand_info[0], CFG_ENV_OFFSET, &total, + (u_char*) tmp_env1); + nand_read(&nand_info[0], CFG_ENV_OFFSET_REDUND, &total, + (u_char*) tmp_env2); + + crc1_ok = (crc32(0, tmp_env1->data, ENV_SIZE) == tmp_env1->crc); + crc2_ok = (crc32(0, tmp_env2->data, ENV_SIZE) == tmp_env2->crc); + + if(!crc1_ok && !crc2_ok) + return use_default(); + else if(crc1_ok && !crc2_ok) + gd->env_valid = 1; + else if(!crc1_ok && crc2_ok) + gd->env_valid = 2; + else { + /* both ok - check serial */ + if(tmp_env1->flags == 255 && tmp_env2->flags == 0) + gd->env_valid = 2; + else if(tmp_env2->flags == 255 && tmp_env1->flags == 0) + gd->env_valid = 1; + else if(tmp_env1->flags > tmp_env2->flags) + gd->env_valid = 1; + else if(tmp_env2->flags > tmp_env1->flags) + gd->env_valid = 2; + else /* flags are equal - almost impossible */ + gd->env_valid = 1; + } + + free(env_ptr); + if(gd->env_valid == 1) { + env_ptr = tmp_env1; + free(tmp_env2); + } else { + env_ptr = tmp_env2; + free(tmp_env1); + } + +#endif /* ! ENV_IS_EMBEDDED */ +} +#else /* ! CFG_ENV_OFFSET_REDUND */ /* * The legacy NAND code saved the environment in the first NAND device i.e., * nand_dev_desc + 0. This is also the behaviour using the new NAND code. @@ -149,16 +233,14 @@ void env_relocate_spec (void) if (crc32(0, env_ptr->data, ENV_SIZE) != env_ptr->crc) return use_default(); #endif /* ! ENV_IS_EMBEDDED */ - } +#endif /* CFG_ENV_OFFSET_REDUND */ static void use_default() { - DECLARE_GLOBAL_DATA_PTR; - puts ("*** Warning - bad CRC or NAND, using default environment\n\n"); - if (default_environment_size > CFG_ENV_SIZE){ + if (default_environment_size > CFG_ENV_SIZE){ puts ("*** Error - default environment is too large\n\n"); return; } @@ -168,7 +250,7 @@ static void use_default() default_environment, default_environment_size); env_ptr->crc = crc32(0, env_ptr->data, ENV_SIZE); - gd->env_valid = 1; + gd->env_valid = 1; } diff --git a/common/env_nowhere.c b/common/env_nowhere.c index ee4237c..17ecc77 100644 --- a/common/env_nowhere.c +++ b/common/env_nowhere.c @@ -32,6 +32,8 @@ #include <environment.h> #include <linux/stddef.h> +DECLARE_GLOBAL_DATA_PTR; + env_t *env_ptr = NULL; extern uchar default_environment[]; @@ -44,8 +46,6 @@ void env_relocate_spec (void) uchar env_get_char_spec (int index) { - DECLARE_GLOBAL_DATA_PTR; - return ( *((uchar *)(gd->env_addr + index)) ); } @@ -56,8 +56,6 @@ uchar env_get_char_spec (int index) */ int env_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->env_addr = (ulong)&default_environment[0]; gd->env_valid = 0; diff --git a/common/env_nvram.c b/common/env_nvram.c index a406e42..7c18896 100644 --- a/common/env_nvram.c +++ b/common/env_nvram.c @@ -42,6 +42,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CFG_ENV_IS_IN_NVRAM /* Environment is in NVRAM */ #include <command.h> @@ -74,7 +76,6 @@ uchar env_get_char_spec (int index) return c; #else - DECLARE_GLOBAL_DATA_PTR; uchar retval; enable_nvram(); retval = *((uchar *)(gd->env_addr + index)); @@ -92,8 +93,6 @@ uchar env_get_char_spec (int index) return c; #else - DECLARE_GLOBAL_DATA_PTR; - return *((uchar *)(gd->env_addr + index)); #endif } @@ -135,7 +134,6 @@ int saveenv (void) */ int env_init (void) { - DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_AMIGAONEG3SE enable_nvram(); #endif diff --git a/common/exports.c b/common/exports.c index 9858217..ef25338 100644 --- a/common/exports.c +++ b/common/exports.c @@ -1,6 +1,8 @@ #include <common.h> #include <exports.h> +DECLARE_GLOBAL_DATA_PTR; + static void dummy(void) { } @@ -12,7 +14,6 @@ unsigned long get_version(void) void jumptable_init (void) { - DECLARE_GLOBAL_DATA_PTR; int i; gd->jt = (void **) malloc (XF_MAX * sizeof (void *)); diff --git a/common/hush.c b/common/hush.c index bb5041a..feb5627 100644 --- a/common/hush.c +++ b/common/hush.c @@ -138,6 +138,8 @@ extern int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); / #endif #ifdef __U_BOOT__ +DECLARE_GLOBAL_DATA_PTR; + #define EXIT_SUCCESS 0 #define EOF -1 #define syntax() syntax_err() @@ -3272,7 +3274,6 @@ int parse_file_outer(void) #ifdef __U_BOOT__ static void u_boot_hush_reloc(void) { - DECLARE_GLOBAL_DATA_PTR; unsigned long addr; struct reserved_combo *r; diff --git a/common/lcd.c b/common/lcd.c index e64972f..0be1912 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -50,7 +50,6 @@ #include <lcdvideo.h> #endif - #ifdef CONFIG_LCD /************************************************************************/ @@ -68,6 +67,8 @@ # endif #endif +DECLARE_GLOBAL_DATA_PTR; + ulong lcd_setmem (ulong addr); static void lcd_drawchars (ushort x, ushort y, uchar *str, int count); @@ -339,8 +340,6 @@ static void test_pattern (void) int drv_lcd_init (void) { - DECLARE_GLOBAL_DATA_PTR; - device_t lcddev; int rc; @@ -682,8 +681,6 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) static void *lcd_logo (void) { #ifdef CONFIG_LCD_INFO - DECLARE_GLOBAL_DATA_PTR; - char info[80]; char temp[32]; #endif /* CONFIG_LCD_INFO */ diff --git a/common/lynxkdi.c b/common/lynxkdi.c index ed1b595..76a271b 100644 --- a/common/lynxkdi.c +++ b/common/lynxkdi.c @@ -20,13 +20,14 @@ #if defined(CONFIG_LYNXKDI) #include <lynxkdi.h> +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_MPC8260) || defined(CONFIG_440EP) || defined(CONFIG_440GR) void lynxkdi_boot ( image_header_t *hdr ) { void (*lynxkdi)(void) = (void(*)(void)) ntohl(hdr->ih_ep); lynxos_bootparms_t *parms = (lynxos_bootparms_t *)0x0020; bd_t *kbd; - DECLARE_GLOBAL_DATA_PTR; u32 *psz = (u32 *)(ntohl(hdr->ih_load) + 0x0204); memset( parms, 0, sizeof(*parms)); diff --git a/common/main.c b/common/main.c index 445cb18..758ef8d 100644 --- a/common/main.c +++ b/common/main.c @@ -36,6 +36,10 @@ #include <post.h> +#ifdef CONFIG_SILENT_CONSOLE +DECLARE_GLOBAL_DATA_PTR; +#endif + #if defined(CONFIG_BOOT_RETRY_TIME) && defined(CONFIG_RESET_TO_RETRY) extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /* for do_reset() prototype */ #endif @@ -105,14 +109,10 @@ static __inline__ int abortboot(int bootdelay) u_int i; #ifdef CONFIG_SILENT_CONSOLE - { - DECLARE_GLOBAL_DATA_PTR; - - if (gd->flags & GD_FLG_SILENT) { - /* Restore serial console */ - console_assign (stdout, "serial"); - console_assign (stderr, "serial"); - } + if (gd->flags & GD_FLG_SILENT) { + /* Restore serial console */ + console_assign (stdout, "serial"); + console_assign (stderr, "serial"); } #endif @@ -195,17 +195,13 @@ static __inline__ int abortboot(int bootdelay) # endif #ifdef CONFIG_SILENT_CONSOLE - { - DECLARE_GLOBAL_DATA_PTR; - - if (abort) { - /* permanently enable normal console output */ - gd->flags &= ~(GD_FLG_SILENT); - } else if (gd->flags & GD_FLG_SILENT) { - /* Restore silent console */ - console_assign (stdout, "nulldev"); - console_assign (stderr, "nulldev"); - } + if (abort) { + /* permanently enable normal console output */ + gd->flags &= ~(GD_FLG_SILENT); + } else if (gd->flags & GD_FLG_SILENT) { + /* Restore silent console */ + console_assign (stdout, "nulldev"); + console_assign (stderr, "nulldev"); } #endif @@ -223,14 +219,10 @@ static __inline__ int abortboot(int bootdelay) int abort = 0; #ifdef CONFIG_SILENT_CONSOLE - { - DECLARE_GLOBAL_DATA_PTR; - - if (gd->flags & GD_FLG_SILENT) { - /* Restore serial console */ - console_assign (stdout, "serial"); - console_assign (stderr, "serial"); - } + if (gd->flags & GD_FLG_SILENT) { + /* Restore serial console */ + console_assign (stdout, "serial"); + console_assign (stderr, "serial"); } #endif @@ -279,17 +271,13 @@ static __inline__ int abortboot(int bootdelay) putc ('\n'); #ifdef CONFIG_SILENT_CONSOLE - { - DECLARE_GLOBAL_DATA_PTR; - - if (abort) { - /* permanently enable normal console output */ - gd->flags &= ~(GD_FLG_SILENT); - } else if (gd->flags & GD_FLG_SILENT) { - /* Restore silent console */ - console_assign (stdout, "nulldev"); - console_assign (stderr, "nulldev"); - } + if (abort) { + /* permanently enable normal console output */ + gd->flags &= ~(GD_FLG_SILENT); + } else if (gd->flags & GD_FLG_SILENT) { + /* Restore silent console */ + console_assign (stdout, "nulldev"); + console_assign (stderr, "nulldev"); } #endif diff --git a/common/serial.c b/common/serial.c index 22d8fd0..2acbd08 100644 --- a/common/serial.c +++ b/common/serial.c @@ -25,6 +25,8 @@ #include <serial.h> #include <devices.h> +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_SERIAL_MULTI) static struct serial_device *serial_devices = NULL; @@ -49,8 +51,6 @@ struct serial_device *default_serial_console (void) static int serial_register (struct serial_device *dev) { - DECLARE_GLOBAL_DATA_PTR; - dev->init += gd->reloc_off; dev->setbrg += gd->reloc_off; dev->getc += gd->reloc_off; @@ -131,8 +131,6 @@ void serial_reinit_all (void) int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - if (!(gd->flags & GD_FLG_RELOC) || !serial_current) { struct serial_device *dev = default_serial_console (); @@ -144,8 +142,6 @@ int serial_init (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - if (!(gd->flags & GD_FLG_RELOC) || !serial_current) { struct serial_device *dev = default_serial_console (); @@ -158,8 +154,6 @@ void serial_setbrg (void) int serial_getc (void) { - DECLARE_GLOBAL_DATA_PTR; - if (!(gd->flags & GD_FLG_RELOC) || !serial_current) { struct serial_device *dev = default_serial_console (); @@ -171,8 +165,6 @@ int serial_getc (void) int serial_tstc (void) { - DECLARE_GLOBAL_DATA_PTR; - if (!(gd->flags & GD_FLG_RELOC) || !serial_current) { struct serial_device *dev = default_serial_console (); @@ -184,8 +176,6 @@ int serial_tstc (void) void serial_putc (const char c) { - DECLARE_GLOBAL_DATA_PTR; - if (!(gd->flags & GD_FLG_RELOC) || !serial_current) { struct serial_device *dev = default_serial_console (); @@ -198,8 +188,6 @@ void serial_putc (const char c) void serial_puts (const char *s) { - DECLARE_GLOBAL_DATA_PTR; - if (!(gd->flags & GD_FLG_RELOC) || !serial_current) { struct serial_device *dev = default_serial_console (); diff --git a/common/soft_i2c.c b/common/soft_i2c.c index b3642da..bffcd44 100644 --- a/common/soft_i2c.c +++ b/common/soft_i2c.c @@ -39,6 +39,10 @@ /* #define DEBUG_I2C */ +#ifdef DEBUG_I2C +DECLARE_GLOBAL_DATA_PTR; +#endif + /*----------------------------------------------------------------------- * Definitions @@ -53,7 +57,6 @@ #ifdef DEBUG_I2C #define PRINTD(fmt,args...) do { \ - DECLARE_GLOBAL_DATA_PTR; \ if (gd->have_console) \ printf (fmt ,##args); \ } while (0) diff --git a/common/xyzModem.c b/common/xyzModem.c new file mode 100644 index 0000000..3c86b13 --- /dev/null +++ b/common/xyzModem.c @@ -0,0 +1,739 @@ +//========================================================================== +// +// xyzModem.c +// +// RedBoot stream handler for xyzModem protocol +// +//========================================================================== +//####ECOSGPLCOPYRIGHTBEGIN#### +// ------------------------------------------- +// This file is part of eCos, the Embedded Configurable Operating System. +// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +// Copyright (C) 2002 Gary Thomas +// +// eCos is free software; you can redistribute it and/or modify it under +// the terms of the GNU General Public License as published by the Free +// Software Foundation; either version 2 or (at your option) any later version. +// +// eCos is distributed in the hope that it will be useful, but WITHOUT ANY +// WARRANTY; without even the implied warranty of MERCHANTABILITY or +// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +// for more details. +// +// You should have received a copy of the GNU General Public License along +// with eCos; if not, write to the Free Software Foundation, Inc., +// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. +// +// As a special exception, if other files instantiate templates or use macros +// or inline functions from this file, or you compile this file and link it +// with other works to produce a work based on this file, this file does not +// by itself cause the resulting work to be covered by the GNU General Public +// License. However the source code for this file must still be made available +// in accordance with section (3) of the GNU General Public License. +// +// This exception does not invalidate any other reasons why a work based on +// this file might be covered by the GNU General Public License. +// +// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. +// at http://sources.redhat.com/ecos/ecos-license/ +// ------------------------------------------- +//####ECOSGPLCOPYRIGHTEND#### +//========================================================================== +//#####DESCRIPTIONBEGIN#### +// +// Author(s): gthomas +// Contributors: gthomas, tsmith, Yoshinori Sato +// Date: 2000-07-14 +// Purpose: +// Description: +// +// This code is part of RedBoot (tm). +// +//####DESCRIPTIONEND#### +// +//========================================================================== +#include <common.h> +#include <xyzModem.h> +#include <stdarg.h> +#include <crc.h> + +// Assumption - run xyzModem protocol over the console port + +// Values magic to the protocol +#define SOH 0x01 +#define STX 0x02 +#define EOT 0x04 +#define ACK 0x06 +#define BSP 0x08 +#define NAK 0x15 +#define CAN 0x18 +#define EOF 0x1A // ^Z for DOS officionados + +#define USE_YMODEM_LENGTH + +// Data & state local to the protocol +static struct { +#ifdef REDBOOT + hal_virtual_comm_table_t* __chan; +#else + int *__chan; +#endif + unsigned char pkt[1024], *bufp; + unsigned char blk,cblk,crc1,crc2; + unsigned char next_blk; // Expected block + int len, mode, total_retries; + int total_SOH, total_STX, total_CAN; + bool crc_mode, at_eof, tx_ack; +#ifdef USE_YMODEM_LENGTH + unsigned long file_length, read_length; +#endif +} xyz; + +#define xyzModem_CHAR_TIMEOUT 2000 // 2 seconds +#define xyzModem_MAX_RETRIES 20 +#define xyzModem_MAX_RETRIES_WITH_CRC 10 +#define xyzModem_CAN_COUNT 3 // Wait for 3 CAN before quitting + + +#ifndef REDBOOT //SB +typedef int cyg_int32; +int CYGACC_COMM_IF_GETC_TIMEOUT (char chan,char *c) { +#define DELAY 20 + unsigned long counter=0; + while (!tstc() && (counter < xyzModem_CHAR_TIMEOUT*1000/DELAY)) { + udelay(DELAY); + counter++; + } + if (tstc()) { + *c=getc(); + return 1; + } + return 0; +} + +void CYGACC_COMM_IF_PUTC(char x,char y) { + putc(y); +} + +// Validate a hex character +__inline__ static bool +_is_hex(char c) +{ + return (((c >= '0') && (c <= '9')) || + ((c >= 'A') && (c <= 'F')) || + ((c >= 'a') && (c <= 'f'))); +} + +// Convert a single hex nibble +__inline__ static int +_from_hex(char c) +{ + int ret = 0; + + if ((c >= '0') && (c <= '9')) { + ret = (c - '0'); + } else if ((c >= 'a') && (c <= 'f')) { + ret = (c - 'a' + 0x0a); + } else if ((c >= 'A') && (c <= 'F')) { + ret = (c - 'A' + 0x0A); + } + return ret; +} + +// Convert a character to lower case +__inline__ static char +_tolower(char c) +{ + if ((c >= 'A') && (c <= 'Z')) { + c = (c - 'A') + 'a'; + } + return c; +} + + + +// +// Parse (scan) a number +// +bool +parse_num(char *s, unsigned long *val, char **es, char *delim) +{ + bool first = true; + int radix = 10; + char c; + unsigned long result = 0; + int digit; + + while (*s == ' ') s++; + while (*s) { + if (first && (s[0] == '0') && (_tolower(s[1]) == 'x')) { + radix = 16; + s += 2; + } + first = false; + c = *s++; + if (_is_hex(c) && ((digit = _from_hex(c)) < radix)) { + // Valid digit +#ifdef CYGPKG_HAL_MIPS + // FIXME: tx49 compiler generates 0x2539018 for MUL which + // isn't any good. + if (16 == radix) + result = result << 4; + else + result = 10 * result; + result += digit; +#else + result = (result * radix) + digit; +#endif + } else { + if (delim != (char *)0) { + // See if this character is one of the delimiters + char *dp = delim; + while (*dp && (c != *dp)) dp++; + if (*dp) break; // Found a good delimiter + } + return false; // Malformatted number + } + } + *val = result; + if (es != (char **)0) { + *es = s; + } + return true; +} + +#endif + +#define USE_SPRINTF +#ifdef DEBUG +#ifndef USE_SPRINTF +// +// Note: this debug setup only works if the target platform has two serial ports +// available so that the other one (currently only port 1) can be used for debug +// messages. +// +static int +zm_dprintf(char *fmt, ...) +{ + int cur_console; + va_list args; + + va_start(args, fmt); +#ifdef REDBOOT + cur_console = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT); + CYGACC_CALL_IF_SET_CONSOLE_COMM(1); +#endif + diag_vprintf(fmt, args); +#ifdef REDBOOT + CYGACC_CALL_IF_SET_CONSOLE_COMM(cur_console); +#endif +} + +static void +zm_flush(void) +{ +} + +#else +// +// Note: this debug setup works by storing the strings in a fixed buffer +// +#define FINAL +#ifdef FINAL +static char *zm_out = (char *)0x00380000; +static char *zm_out_start = (char *)0x00380000; +#else +static char zm_buf[8192]; +static char *zm_out=zm_buf; +static char *zm_out_start = zm_buf; + +#endif +static int +zm_dprintf(char *fmt, ...) +{ + int len; + va_list args; + + va_start(args, fmt); + len = diag_vsprintf(zm_out, fmt, args); + zm_out += len; + return len; +} + +static void +zm_flush(void) +{ + char *p = zm_out_start; +#ifdef REDBOOT + while (*p) mon_write_char(*p++); +#endif + zm_out = zm_out_start; +} +#endif + +static void +zm_dump_buf(void *buf, int len) +{ +#ifdef REDBOOT + diag_vdump_buf_with_offset(zm_dprintf, buf, len, 0); +#else + +#endif +} + +static unsigned char zm_buf[2048]; +static unsigned char *zm_bp; + +static void +zm_new(void) +{ + zm_bp = zm_buf; +} + +static void +zm_save(unsigned char c) +{ + *zm_bp++ = c; +} + +static void +zm_dump(int line) +{ + zm_dprintf("Packet at line: %d\n", line); + zm_dump_buf(zm_buf, zm_bp-zm_buf); +} + +#define ZM_DEBUG(x) x +#else +#define ZM_DEBUG(x) +#endif + +// Wait for the line to go idle +static void +xyzModem_flush(void) +{ + int res; + char c; + while (true) { + res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c); + if (!res) return; + } +} + +static int +xyzModem_get_hdr(void) +{ + char c; + int res; + bool hdr_found = false; + int i, can_total, hdr_chars; + unsigned short cksum; + + ZM_DEBUG(zm_new()); + // Find the start of a header + can_total = 0; + hdr_chars = 0; + + if (xyz.tx_ack) { + CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); + xyz.tx_ack = false; + } + while (!hdr_found) { + res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c); + ZM_DEBUG(zm_save(c)); + if (res) { + hdr_chars++; + switch (c) { + case SOH: + xyz.total_SOH++; + case STX: + if (c == STX) xyz.total_STX++; + hdr_found = true; + break; + case CAN: + xyz.total_CAN++; + ZM_DEBUG(zm_dump(__LINE__)); + if (++can_total == xyzModem_CAN_COUNT) { + return xyzModem_cancel; + } else { + // Wait for multiple CAN to avoid early quits + break; + } + case EOT: + // EOT only supported if no noise + if (hdr_chars == 1) { + CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); + ZM_DEBUG(zm_dprintf("ACK on EOT #%d\n", __LINE__)); + ZM_DEBUG(zm_dump(__LINE__)); + return xyzModem_eof; + } + default: + // Ignore, waiting for start of header + ; + } + } else { + // Data stream timed out + xyzModem_flush(); // Toss any current input + ZM_DEBUG(zm_dump(__LINE__)); + CYGACC_CALL_IF_DELAY_US((cyg_int32)250000); + return xyzModem_timeout; + } + } + + // Header found, now read the data + res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.blk); + ZM_DEBUG(zm_save(xyz.blk)); + if (!res) { + ZM_DEBUG(zm_dump(__LINE__)); + return xyzModem_timeout; + } + res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.cblk); + ZM_DEBUG(zm_save(xyz.cblk)); + if (!res) { + ZM_DEBUG(zm_dump(__LINE__)); + return xyzModem_timeout; + } + xyz.len = (c == SOH) ? 128 : 1024; + xyz.bufp = xyz.pkt; + for (i = 0; i < xyz.len; i++) { + res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &c); + ZM_DEBUG(zm_save(c)); + if (res) { + xyz.pkt[i] = c; + } else { + ZM_DEBUG(zm_dump(__LINE__)); + return xyzModem_timeout; + } + } + res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.crc1); + ZM_DEBUG(zm_save(xyz.crc1)); + if (!res) { + ZM_DEBUG(zm_dump(__LINE__)); + return xyzModem_timeout; + } + if (xyz.crc_mode) { + res = CYGACC_COMM_IF_GETC_TIMEOUT(*xyz.__chan, &xyz.crc2); + ZM_DEBUG(zm_save(xyz.crc2)); + if (!res) { + ZM_DEBUG(zm_dump(__LINE__)); + return xyzModem_timeout; + } + } + ZM_DEBUG(zm_dump(__LINE__)); + // Validate the message + if ((xyz.blk ^ xyz.cblk) != (unsigned char)0xFF) { + ZM_DEBUG(zm_dprintf("Framing error - blk: %x/%x/%x\n", xyz.blk, xyz.cblk, (xyz.blk ^ xyz.cblk))); + ZM_DEBUG(zm_dump_buf(xyz.pkt, xyz.len)); + xyzModem_flush(); + return xyzModem_frame; + } + // Verify checksum/CRC + if (xyz.crc_mode) { + cksum = cyg_crc16(xyz.pkt, xyz.len); + if (cksum != ((xyz.crc1 << 8) | xyz.crc2)) { + ZM_DEBUG(zm_dprintf("CRC error - recvd: %02x%02x, computed: %x\n", + xyz.crc1, xyz.crc2, cksum & 0xFFFF)); + return xyzModem_cksum; + } + } else { + cksum = 0; + for (i = 0; i < xyz.len; i++) { + cksum += xyz.pkt[i]; + } + if (xyz.crc1 != (cksum & 0xFF)) { + ZM_DEBUG(zm_dprintf("Checksum error - recvd: %x, computed: %x\n", xyz.crc1, cksum & 0xFF)); + return xyzModem_cksum; + } + } + // If we get here, the message passes [structural] muster + return 0; +} + +int +xyzModem_stream_open(connection_info_t *info, int *err) +{ + int console_chan, stat=0; + int retries = xyzModem_MAX_RETRIES; + int crc_retries = xyzModem_MAX_RETRIES_WITH_CRC; + +// ZM_DEBUG(zm_out = zm_out_start); +#ifdef xyzModem_zmodem + if (info->mode == xyzModem_zmodem) { + *err = xyzModem_noZmodem; + return -1; + } +#endif + +#ifdef REDBOOT + // Set up the I/O channel. Note: this allows for using a different port in the future + console_chan = CYGACC_CALL_IF_SET_CONSOLE_COMM(CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT); + if (info->chan >= 0) { + CYGACC_CALL_IF_SET_CONSOLE_COMM(info->chan); + } else { + CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan); + } + xyz.__chan = CYGACC_CALL_IF_CONSOLE_PROCS(); + + CYGACC_CALL_IF_SET_CONSOLE_COMM(console_chan); + CYGACC_COMM_IF_CONTROL(*xyz.__chan, __COMMCTL_SET_TIMEOUT, xyzModem_CHAR_TIMEOUT); +#else +// TODO: CHECK ! + int dummy; + xyz.__chan=&dummy; +#endif + xyz.len = 0; + xyz.crc_mode = true; + xyz.at_eof = false; + xyz.tx_ack = false; + xyz.mode = info->mode; + xyz.total_retries = 0; + xyz.total_SOH = 0; + xyz.total_STX = 0; + xyz.total_CAN = 0; +#ifdef USE_YMODEM_LENGTH + xyz.read_length = 0; + xyz.file_length = 0; +#endif + + CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); + + if (xyz.mode == xyzModem_xmodem) { + // X-modem doesn't have an information header - exit here + xyz.next_blk = 1; + return 0; + } + + while (retries-- > 0) { + stat = xyzModem_get_hdr(); + if (stat == 0) { + // Y-modem file information header + if (xyz.blk == 0) { +#ifdef USE_YMODEM_LENGTH + // skip filename + while (*xyz.bufp++); + // get the length + parse_num(xyz.bufp, &xyz.file_length, NULL, " "); +#endif + // The rest of the file name data block quietly discarded + xyz.tx_ack = true; + } + xyz.next_blk = 1; + xyz.len = 0; + return 0; + } else + if (stat == xyzModem_timeout) { + if (--crc_retries <= 0) xyz.crc_mode = false; + CYGACC_CALL_IF_DELAY_US(5*100000); // Extra delay for startup + CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); + xyz.total_retries++; + ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__)); + } + if (stat == xyzModem_cancel) { + break; + } + } + *err = stat; + ZM_DEBUG(zm_flush()); + return -1; +} + +int +xyzModem_stream_read(char *buf, int size, int *err) +{ + int stat, total, len; + int retries; + + total = 0; + stat = xyzModem_cancel; + // Try and get 'size' bytes into the buffer + while (!xyz.at_eof && (size > 0)) { + if (xyz.len == 0) { + retries = xyzModem_MAX_RETRIES; + while (retries-- > 0) { + stat = xyzModem_get_hdr(); + if (stat == 0) { + if (xyz.blk == xyz.next_blk) { + xyz.tx_ack = true; + ZM_DEBUG(zm_dprintf("ACK block %d (%d)\n", xyz.blk, __LINE__)); + xyz.next_blk = (xyz.next_blk + 1) & 0xFF; + +#if defined(xyzModem_zmodem) || defined(USE_YMODEM_LENGTH) + if (xyz.mode == xyzModem_xmodem || xyz.file_length == 0) { +#else + if (1) { +#endif + // Data blocks can be padded with ^Z (EOF) characters + // This code tries to detect and remove them + if ((xyz.bufp[xyz.len-1] == EOF) && + (xyz.bufp[xyz.len-2] == EOF) && + (xyz.bufp[xyz.len-3] == EOF)) { + while (xyz.len && (xyz.bufp[xyz.len-1] == EOF)) { + xyz.len--; + } + } + } + +#ifdef USE_YMODEM_LENGTH + // See if accumulated length exceeds that of the file. + // If so, reduce size (i.e., cut out pad bytes) + // Only do this for Y-modem (and Z-modem should it ever + // be supported since it can fall back to Y-modem mode). + if (xyz.mode != xyzModem_xmodem && 0 != xyz.file_length) { + xyz.read_length += xyz.len; + if (xyz.read_length > xyz.file_length) { + xyz.len -= (xyz.read_length - xyz.file_length); + } + } +#endif + break; + } else if (xyz.blk == ((xyz.next_blk - 1) & 0xFF)) { + // Just re-ACK this so sender will get on with it + CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); + continue; // Need new header + } else { + stat = xyzModem_sequence; + } + } + if (stat == xyzModem_cancel) { + break; + } + if (stat == xyzModem_eof) { + CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); + ZM_DEBUG(zm_dprintf("ACK (%d)\n", __LINE__)); + if (xyz.mode == xyzModem_ymodem) { + CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); + xyz.total_retries++; + ZM_DEBUG(zm_dprintf("Reading Final Header\n")); + stat = xyzModem_get_hdr(); + CYGACC_COMM_IF_PUTC(*xyz.__chan, ACK); + ZM_DEBUG(zm_dprintf("FINAL ACK (%d)\n", __LINE__)); + } + xyz.at_eof = true; + break; + } + CYGACC_COMM_IF_PUTC(*xyz.__chan, (xyz.crc_mode ? 'C' : NAK)); + xyz.total_retries++; + ZM_DEBUG(zm_dprintf("NAK (%d)\n", __LINE__)); + } + if (stat < 0) { + *err = stat; + xyz.len = -1; + return total; + } + } + // Don't "read" data from the EOF protocol package + if (!xyz.at_eof) { + len = xyz.len; + if (size < len) len = size; + memcpy(buf, xyz.bufp, len); + size -= len; + buf += len; + total += len; + xyz.len -= len; + xyz.bufp += len; + } + } + return total; +} + +void +xyzModem_stream_close(int *err) +{ + diag_printf("xyzModem - %s mode, %d(SOH)/%d(STX)/%d(CAN) packets, %d retries\n", + xyz.crc_mode ? "CRC" : "Cksum", + xyz.total_SOH, xyz.total_STX, xyz.total_CAN, + xyz.total_retries); + ZM_DEBUG(zm_flush()); +} + +// Need to be able to clean out the input buffer, so have to take the +// getc +void xyzModem_stream_terminate(bool abort, int (*getc)(void)) +{ + int c; + + if (abort) { + ZM_DEBUG(zm_dprintf("!!!! TRANSFER ABORT !!!!\n")); + switch (xyz.mode) { + case xyzModem_xmodem: + case xyzModem_ymodem: + // The X/YMODEM Spec seems to suggest that multiple CAN followed by an equal + // number of Backspaces is a friendly way to get the other end to abort. + CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN); + CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN); + CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN); + CYGACC_COMM_IF_PUTC(*xyz.__chan,CAN); + CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP); + CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP); + CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP); + CYGACC_COMM_IF_PUTC(*xyz.__chan,BSP); + // Now consume the rest of what's waiting on the line. + ZM_DEBUG(zm_dprintf("Flushing serial line.\n")); + xyzModem_flush(); + xyz.at_eof = true; + break; +#ifdef xyzModem_zmodem + case xyzModem_zmodem: + // Might support it some day I suppose. +#endif + break; + } + } else { + ZM_DEBUG(zm_dprintf("Engaging cleanup mode...\n")); + // Consume any trailing crap left in the inbuffer from + // previous recieved blocks. Since very few files are an exact multiple + // of the transfer block size, there will almost always be some gunk here. + // If we don't eat it now, RedBoot will think the user typed it. + ZM_DEBUG(zm_dprintf("Trailing gunk:\n")); + while ((c = (*getc)()) > -1) ; + ZM_DEBUG(zm_dprintf("\n")); + // Make a small delay to give terminal programs like minicom + // time to get control again after their file transfer program + // exits. + CYGACC_CALL_IF_DELAY_US((cyg_int32)250000); + } +} + +char * +xyzModem_error(int err) +{ + switch (err) { + case xyzModem_access: + return "Can't access file"; + break; + case xyzModem_noZmodem: + return "Sorry, zModem not available yet"; + break; + case xyzModem_timeout: + return "Timed out"; + break; + case xyzModem_eof: + return "End of file"; + break; + case xyzModem_cancel: + return "Cancelled"; + break; + case xyzModem_frame: + return "Invalid framing"; + break; + case xyzModem_cksum: + return "CRC/checksum error"; + break; + case xyzModem_sequence: + return "Block sequence error"; + break; + default: + return "Unknown error"; + break; + } +} + +// +// RedBoot interface +// +#if 0 // SB +GETC_IO_FUNCS(xyzModem_io, xyzModem_stream_open, xyzModem_stream_close, + xyzModem_stream_terminate, xyzModem_stream_read, xyzModem_error); +RedBoot_load(xmodem, xyzModem_io, false, false, xyzModem_xmodem); +RedBoot_load(ymodem, xyzModem_io, false, false, xyzModem_ymodem); +#endif diff --git a/cpu/74xx_7xx/cpu.c b/cpu/74xx_7xx/cpu.c index 629ed66..706c880 100644 --- a/cpu/74xx_7xx/cpu.c +++ b/cpu/74xx_7xx/cpu.c @@ -49,6 +49,8 @@ #include "../board/MAI/AmigaOneG3SE/memio.h" #endif +DECLARE_GLOBAL_DATA_PTR; + cpu_t get_cpu_type(void) { @@ -111,8 +113,6 @@ get_cpu_type(void) #if !defined(CONFIG_BAB7xx) int checkcpu (void) { - DECLARE_GLOBAL_DATA_PTR; - uint type = get_cpu_type(); uint pvr = get_pvr(); ulong clock = gd->cpu_clk; @@ -258,8 +258,6 @@ do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) #ifdef CONFIG_AMIGAONEG3SE unsigned long get_tbclk(void) { - DECLARE_GLOBAL_DATA_PTR; - return (gd->bus_clk / 4); } #else /* ! CONFIG_AMIGAONEG3SE */ diff --git a/cpu/74xx_7xx/speed.c b/cpu/74xx_7xx/speed.c index f94ff78..2dc5107 100644 --- a/cpu/74xx_7xx/speed.c +++ b/cpu/74xx_7xx/speed.c @@ -29,6 +29,8 @@ #include "../board/MAI/AmigaOneG3SE/via686.h" #endif +DECLARE_GLOBAL_DATA_PTR; + static const int hid1_multipliers_x_10[] = { 25, /* 0000 - 2.5x */ 75, /* 0001 - 7.5x */ @@ -85,7 +87,6 @@ static const int hid1_fx_multipliers_x_10[] = { int get_clocks (void) { - DECLARE_GLOBAL_DATA_PTR; ulong clock = 0; /* calculate the clock frequency based upon the CPU type */ diff --git a/cpu/74xx_7xx/traps.c b/cpu/74xx_7xx/traps.c index ac5f8bf..50c5eeb 100644 --- a/cpu/74xx_7xx/traps.c +++ b/cpu/74xx_7xx/traps.c @@ -36,6 +36,10 @@ #include <command.h> #include <asm/processor.h> +#ifdef CONFIG_AMIGAONEG3SE +DECLARE_GLOBAL_DATA_PTR; +#endif + #if (CONFIG_COMMANDS & CFG_CMD_KGDB) int (*debugger_exception_handler)(struct pt_regs *) = 0; #endif @@ -58,9 +62,6 @@ extern unsigned long search_exception_table(unsigned long); void print_backtrace(unsigned long *sp) { -#ifdef CONFIG_AMIGAONEG3SE - DECLARE_GLOBAL_DATA_PTR; -#endif int cnt = 0; unsigned long i; diff --git a/cpu/arm1136/cpu.c b/cpu/arm1136/cpu.c index 85a4849..fa78eaa 100644 --- a/cpu/arm1136/cpu.c +++ b/cpu/arm1136/cpu.c @@ -37,6 +37,10 @@ #include <asm/arch/omap2420.h> #endif +#ifdef CONFIG_USE_IRQ +DECLARE_GLOBAL_DATA_PTR; +#endif + /* read co-processor 15, register #1 (control register) */ static unsigned long read_p15_c1 (void) { @@ -88,8 +92,6 @@ int cpu_init (void) * setup up stacks if necessary */ #ifdef CONFIG_USE_IRQ - DECLARE_GLOBAL_DATA_PTR; - IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; #endif diff --git a/cpu/arm720t/serial.c b/cpu/arm720t/serial.c index 0f99979..054bab9 100644 --- a/cpu/arm720t/serial.c +++ b/cpu/arm720t/serial.c @@ -34,10 +34,10 @@ #include <clps7111.h> +DECLARE_GLOBAL_DATA_PTR; + void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned int reg = 0; switch (gd->baudrate) { diff --git a/cpu/arm720t/serial_netarm.c b/cpu/arm720t/serial_netarm.c index 5ad98f0..bc6bf30 100644 --- a/cpu/arm720t/serial_netarm.c +++ b/cpu/arm720t/serial_netarm.c @@ -34,6 +34,8 @@ #include <asm/hardware.h> +DECLARE_GLOBAL_DATA_PTR; + #define PORTA (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA)) #if !defined(CONFIG_NETARM_NS7520) #define PORTB (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB)) @@ -67,9 +69,6 @@ extern void _netarm_led_FAIL1(void); */ void serial_setbrg (void) { - /* get the gd pointer */ - DECLARE_GLOBAL_DATA_PTR; - /* set 0 ... make sure pins are configured for serial */ #if !defined(CONFIG_NETARM_NS7520) PORTA = PORTB = diff --git a/cpu/arm920t/at91rm9200/serial.c b/cpu/arm920t/at91rm9200/serial.c index a281932..d563445 100644 --- a/cpu/arm920t/at91rm9200/serial.c +++ b/cpu/arm920t/at91rm9200/serial.c @@ -33,6 +33,8 @@ #include <asm/io.h> #include <asm/arch/hardware.h> +DECLARE_GLOBAL_DATA_PTR; + #if !defined(CONFIG_DBGU) && !defined(CONFIG_USART0) && !defined(CONFIG_USART1) #error must define one of CONFIG_DBGU or CONFIG_USART0 or CONFIG_USART1 #endif @@ -50,7 +52,6 @@ AT91PS_USART us = (AT91PS_USART) AT91C_BASE_US1; void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; int baudrate; if ((baudrate = gd->baudrate) <= 0) diff --git a/cpu/arm920t/cpu.c b/cpu/arm920t/cpu.c index 2f7963d..f93bf57 100644 --- a/cpu/arm920t/cpu.c +++ b/cpu/arm920t/cpu.c @@ -33,6 +33,10 @@ #include <command.h> #include <arm920t.h> +#ifdef CONFIG_USE_IRQ +DECLARE_GLOBAL_DATA_PTR; +#endif + /* read co-processor 15, register #1 (control register) */ static unsigned long read_p15_c1 (void) { @@ -91,8 +95,6 @@ int cpu_init (void) * setup up stacks if necessary */ #ifdef CONFIG_USE_IRQ - DECLARE_GLOBAL_DATA_PTR; - IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; #endif diff --git a/cpu/arm920t/ks8695/serial.c b/cpu/arm920t/ks8695/serial.c index 0dd91e7..aacd1be 100644 --- a/cpu/arm920t/ks8695/serial.c +++ b/cpu/arm920t/ks8695/serial.c @@ -25,6 +25,8 @@ #error "Bad: you didn't configure serial ..." #endif +DECLARE_GLOBAL_DATA_PTR; + /* * Define the UART hardware register access structure. */ @@ -54,7 +56,6 @@ int serial_console = 1; void serial_setbrg(void) { - DECLARE_GLOBAL_DATA_PTR; volatile struct ks8695uart *uartp = KS8695_UART_ADDR; /* Set to global baud rate and 8 data bits, no parity, 1 stop bit*/ diff --git a/cpu/arm920t/s3c24x0/serial.c b/cpu/arm920t/s3c24x0/serial.c index 8327443..36851ad 100644 --- a/cpu/arm920t/s3c24x0/serial.c +++ b/cpu/arm920t/s3c24x0/serial.c @@ -27,6 +27,8 @@ #include <s3c2410.h> #endif +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_SERIAL1 #define UART_NR S3C24X0_UART0 @@ -48,7 +50,6 @@ void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR); int i; unsigned int reg = 0; diff --git a/cpu/arm920t/start.S b/cpu/arm920t/start.S index 4603cf5..346f0d0 100644 --- a/cpu/arm920t/start.S +++ b/cpu/arm920t/start.S @@ -237,6 +237,7 @@ _start_armboot: .word start_armboot */ +#ifndef CONFIG_SKIP_LOWLEVEL_INIT cpu_init_crit: /* * flush v4 I/D caches @@ -264,7 +265,7 @@ cpu_init_crit: bl lowlevel_init mov lr, ip mov pc, lr - +#endif /* CONFIG_SKIP_LOWLEVEL_INIT */ /* ************************************************************************* diff --git a/cpu/arm925t/cpu.c b/cpu/arm925t/cpu.c index c1c6b03..d85b7fa 100644 --- a/cpu/arm925t/cpu.c +++ b/cpu/arm925t/cpu.c @@ -33,6 +33,10 @@ #include <command.h> #include <arm925t.h> +#ifdef CONFIG_USE_IRQ +DECLARE_GLOBAL_DATA_PTR; +#endif + /* read co-processor 15, register #1 (control register) */ static unsigned long read_p15_c1 (void) { @@ -91,8 +95,6 @@ int cpu_init (void) * setup up stacks if necessary */ #ifdef CONFIG_USE_IRQ - DECLARE_GLOBAL_DATA_PTR; - IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; #endif diff --git a/cpu/arm926ejs/cpu.c b/cpu/arm926ejs/cpu.c index f57c5a5..722732e 100644 --- a/cpu/arm926ejs/cpu.c +++ b/cpu/arm926ejs/cpu.c @@ -33,6 +33,10 @@ #include <command.h> #include <arm926ejs.h> +#ifdef CONFIG_USE_IRQ +DECLARE_GLOBAL_DATA_PTR; +#endif + /* read co-processor 15, register #1 (control register) */ static unsigned long read_p15_c1 (void) { @@ -91,8 +95,6 @@ int cpu_init (void) * setup up stacks if necessary */ #ifdef CONFIG_USE_IRQ - DECLARE_GLOBAL_DATA_PTR; - IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; #endif diff --git a/cpu/arm946es/cpu.c b/cpu/arm946es/cpu.c index ba0a4e4..4c63a8d 100644 --- a/cpu/arm946es/cpu.c +++ b/cpu/arm946es/cpu.c @@ -33,6 +33,10 @@ #include <command.h> #include <arm946es.h> +#ifdef CONFIG_USE_IRQ +DECLARE_GLOBAL_DATA_PTR; +#endif + /* read co-processor 15, register #1 (control register) */ static unsigned long read_p15_c1 (void) { @@ -91,8 +95,6 @@ int cpu_init (void) * setup up stacks if necessary */ #ifdef CONFIG_USE_IRQ - DECLARE_GLOBAL_DATA_PTR; - IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; #endif diff --git a/cpu/arm_intcm/cpu.c b/cpu/arm_intcm/cpu.c index d03b09d..e2309f8 100644 --- a/cpu/arm_intcm/cpu.c +++ b/cpu/arm_intcm/cpu.c @@ -33,14 +33,16 @@ #include <common.h> #include <command.h> +#ifdef CONFIG_USE_IRQ +DECLARE_GLOBAL_DATA_PTR; +#endif + int cpu_init (void) { /* * setup up stacks if necessary */ #ifdef CONFIG_USE_IRQ - DECLARE_GLOBAL_DATA_PTR; - IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; #endif diff --git a/cpu/bf533/serial.c b/cpu/bf533/serial.c index 84ae9d9..7b43ffd 100644 --- a/cpu/bf533/serial.c +++ b/cpu/bf533/serial.c @@ -51,6 +51,8 @@ #include <asm/uaccess.h> #include "bf533_serial.h" +DECLARE_GLOBAL_DATA_PTR; + unsigned long pll_div_fact; void calc_baud(void) @@ -72,7 +74,6 @@ void calc_baud(void) void serial_setbrg(void) { int i; - DECLARE_GLOBAL_DATA_PTR; calc_baud(); diff --git a/cpu/i386/sc520.c b/cpu/i386/sc520.c index 689e775..c83f0bb 100644 --- a/cpu/i386/sc520.c +++ b/cpu/i386/sc520.c @@ -36,6 +36,8 @@ #include <asm/pci.h> #include <asm/ic/sc520.h> +DECLARE_GLOBAL_DATA_PTR; + /* * utility functions for boards based on the AMD sc520 * @@ -93,8 +95,6 @@ u32 read_mmcr_long(u16 mmcr) void init_sc520(void) { - DECLARE_GLOBAL_DATA_PTR; - /* Set the UARTxCTL register at it's slower, * baud clock giving us a 1.8432 MHz reference */ @@ -139,7 +139,6 @@ void init_sc520(void) unsigned long init_sc520_dram(void) { - DECLARE_GLOBAL_DATA_PTR; bd_t *bd = gd->bd; u32 dram_present=0; diff --git a/cpu/i386/serial.c b/cpu/i386/serial.c index db13008..e7299a7 100644 --- a/cpu/i386/serial.c +++ b/cpu/i386/serial.c @@ -55,6 +55,8 @@ #include <malloc.h> #endif +DECLARE_GLOBAL_DATA_PTR; + #define UART_RBR 0x00 #define UART_THR 0x00 #define UART_IER 0x01 @@ -126,13 +128,9 @@ static int serial_div(int baudrate) int serial_init(void) { - DECLARE_GLOBAL_DATA_PTR; - volatile char val; - int bdiv = serial_div(gd->baudrate); - outb(0x80, UART0_BASE + UART_LCR); /* set DLAB bit */ outb(bdiv, UART0_BASE + UART_DLL); /* set baudrate divisor */ outb(bdiv >> 8, UART0_BASE + UART_DLM);/* set baudrate divisor */ @@ -150,8 +148,6 @@ int serial_init(void) void serial_setbrg(void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned short bdiv; bdiv = serial_div(gd->baudrate); @@ -410,8 +406,6 @@ int serial_buffered_tstc(void) #if (CONFIG_KGDB_SER_INDEX & 2) void kgdb_serial_init(void) { - DECLARE_GLOBAL_DATA_PTR; - volatile char val; bdiv = serial_div (CONFIG_KGDB_BAUDRATE); diff --git a/cpu/ixp/cpu.c b/cpu/ixp/cpu.c index 9383473..2a2bd50 100644 --- a/cpu/ixp/cpu.c +++ b/cpu/ixp/cpu.c @@ -34,14 +34,16 @@ #include <command.h> #include <asm/arch/ixp425.h> +#ifdef CONFIG_USE_IRQ +DECLARE_GLOBAL_DATA_PTR; +#endif + int cpu_init (void) { /* * setup up stacks if necessary */ #ifdef CONFIG_USE_IRQ - DECLARE_GLOBAL_DATA_PTR; - IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; #endif diff --git a/cpu/ixp/serial.c b/cpu/ixp/serial.c index aea0cf8..2015958 100644 --- a/cpu/ixp/serial.c +++ b/cpu/ixp/serial.c @@ -31,10 +31,10 @@ #include <common.h> #include <asm/arch/ixp425.h> +DECLARE_GLOBAL_DATA_PTR; + void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned int quot = 0; int uart = CFG_IXP425_CONSOLE; diff --git a/cpu/lh7a40x/cpu.c b/cpu/lh7a40x/cpu.c index 718f253..578eb73 100644 --- a/cpu/lh7a40x/cpu.c +++ b/cpu/lh7a40x/cpu.c @@ -33,6 +33,10 @@ #include <command.h> #include <arm920t.h> +#ifdef CONFIG_USE_IRQ +DECLARE_GLOBAL_DATA_PTR; +#endif + /* read co-processor 15, register #1 (control register) */ static unsigned long read_p15_c1 (void) { @@ -90,8 +94,6 @@ int cpu_init (void) * setup up stacks if necessary */ #ifdef CONFIG_USE_IRQ - DECLARE_GLOBAL_DATA_PTR; - IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; #endif diff --git a/cpu/lh7a40x/serial.c b/cpu/lh7a40x/serial.c index ff5b2d8..2132c05 100644 --- a/cpu/lh7a40x/serial.c +++ b/cpu/lh7a40x/serial.c @@ -21,6 +21,8 @@ #include <common.h> #include <lh7a40x.h> +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_CONSOLE_UART1) # define UART_CONSOLE 1 #elif defined(CONFIG_CONSOLE_UART2) @@ -33,7 +35,6 @@ void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE); int i; unsigned int reg = 0; diff --git a/cpu/mcf52x2/serial.c b/cpu/mcf52x2/serial.c index c730922..79628d0 100644 --- a/cpu/mcf52x2/serial.c +++ b/cpu/mcf52x2/serial.c @@ -38,6 +38,8 @@ #include <asm/m5249.h> #endif +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_M5249 #define DoubleClock(a) ((double)(CFG_CLK/2) / 32.0 / (double)(a)) #else @@ -134,12 +136,10 @@ int rs_get_char(void) } void serial_setbrg(void) { - DECLARE_GLOBAL_DATA_PTR; rs_serial_setbaudrate(0,gd->bd->bi_baudrate); } int serial_init(void) { - DECLARE_GLOBAL_DATA_PTR; rs_serial_init(0,gd->baudrate); return 0; } diff --git a/cpu/mcf52x2/speed.c b/cpu/mcf52x2/speed.c index 519c992..ac860b2 100644 --- a/cpu/mcf52x2/speed.c +++ b/cpu/mcf52x2/speed.c @@ -24,13 +24,13 @@ #include <common.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + /* * get_clocks() fills in gd->cpu_clock and gd->bus_clk */ int get_clocks (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->cpu_clk = CFG_CLK; #ifdef CONFIG_M5249 gd->bus_clk = gd->cpu_clk / 2; diff --git a/cpu/mpc5xx/cpu.c b/cpu/mpc5xx/cpu.c index 0c22a31..4bef90c 100644 --- a/cpu/mpc5xx/cpu.c +++ b/cpu/mpc5xx/cpu.c @@ -34,6 +34,7 @@ #include <command.h> #include <mpc5xx.h> +DECLARE_GLOBAL_DATA_PTR; #if (defined(CONFIG_MPC555)) # define ID_STR "MPC555/556" @@ -62,8 +63,6 @@ static int check_cpu_version (long clock, uint pvr, uint immr) */ int checkcpu (void) { - DECLARE_GLOBAL_DATA_PTR; - ulong clock = gd->cpu_clk; uint immr = get_immr (0); /* Return full IMMR contents */ uint pvr = get_pvr (); /* Retrieve PVR register */ @@ -104,7 +103,6 @@ void reset_5xx_watchdog (volatile immap_t * immr) */ unsigned long get_tbclk (void) { - DECLARE_GLOBAL_DATA_PTR; volatile immap_t *immr = (volatile immap_t *) CFG_IMMR; ulong oscclk, factor; diff --git a/cpu/mpc5xx/serial.c b/cpu/mpc5xx/serial.c index 4868782..ac5556f 100644 --- a/cpu/mpc5xx/serial.c +++ b/cpu/mpc5xx/serial.c @@ -34,6 +34,7 @@ #include <command.h> #include <mpc5xx.h> +DECLARE_GLOBAL_DATA_PTR; /* * Local function prototypes @@ -128,7 +129,6 @@ int serial_tstc() void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; volatile immap_t *immr = (immap_t *)CFG_IMMR; short scxbr; diff --git a/cpu/mpc5xx/speed.c b/cpu/mpc5xx/speed.c index f6097f5..6a1fa15 100644 --- a/cpu/mpc5xx/speed.c +++ b/cpu/mpc5xx/speed.c @@ -31,12 +31,13 @@ #include <mpc5xx.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + /* * Get cpu and bus clock */ int get_clocks (void) { - DECLARE_GLOBAL_DATA_PTR; volatile immap_t *immr = (immap_t *) CFG_IMMR; #ifndef CONFIG_5xx_GCLK_FREQ diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c index 8d1e7c6..5ad4baa 100644 --- a/cpu/mpc5xxx/cpu.c +++ b/cpu/mpc5xxx/cpu.c @@ -31,10 +31,10 @@ #include <mpc5xxx.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + int checkcpu (void) { - DECLARE_GLOBAL_DATA_PTR; - ulong clock = gd->cpu_clk; char buf[32]; #ifndef CONFIG_MGT5100 @@ -94,8 +94,6 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) */ unsigned long get_tbclk (void) { - DECLARE_GLOBAL_DATA_PTR; - ulong tbclk; tbclk = (gd->bus_clk + 3L) / 4L; diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c index 3df0050..4a370ff 100644 --- a/cpu/mpc5xxx/cpu_init.c +++ b/cpu/mpc5xxx/cpu_init.c @@ -24,6 +24,8 @@ #include <common.h> #include <mpc5xxx.h> +DECLARE_GLOBAL_DATA_PTR; + /* * Breath some life into the CPU... * @@ -32,8 +34,6 @@ */ void cpu_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long addecr = (1 << 25); /* Boot_CS */ #if defined(CFG_RAMBOOT) && defined(CONFIG_MGT5100) addecr |= (1 << 22); /* SDRAM enable */ diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index 2e8e549..19737ce 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -14,6 +14,8 @@ #include "sdma.h" #include "fec.h" +DECLARE_GLOBAL_DATA_PTR; + /* #define DEBUG 0x28 */ #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) && \ @@ -242,7 +244,6 @@ static void mpc5xxx_fec_set_hwaddr(mpc5xxx_fec_priv *fec, char *mac) /********************************************************************/ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) { - DECLARE_GLOBAL_DATA_PTR; mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; @@ -393,7 +394,6 @@ static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) /********************************************************************/ static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) { - DECLARE_GLOBAL_DATA_PTR; mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ diff --git a/cpu/mpc5xxx/i2c.c b/cpu/mpc5xxx/i2c.c index 044db46..0f02e78 100644 --- a/cpu/mpc5xxx/i2c.c +++ b/cpu/mpc5xxx/i2c.c @@ -23,6 +23,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_HARD_I2C #include <mpc5xxx.h> @@ -228,7 +230,6 @@ void i2c_init(int speed, int saddr) static int mpc_get_fdr(int speed) { - DECLARE_GLOBAL_DATA_PTR; static int fdr = -1; if (fdr == -1) { diff --git a/cpu/mpc5xxx/ide.c b/cpu/mpc5xxx/ide.c index 1af794c..29b99f6 100644 --- a/cpu/mpc5xxx/ide.c +++ b/cpu/mpc5xxx/ide.c @@ -27,6 +27,8 @@ #ifdef CFG_CMD_IDE #include <mpc5xxx.h> +DECLARE_GLOBAL_DATA_PTR; + #define CALC_TIMING(t) (t + period - 1) / period #ifdef CONFIG_IDE_RESET @@ -35,7 +37,6 @@ extern void init_ide_reset (void); int ide_preinit (void) { - DECLARE_GLOBAL_DATA_PTR; long period, t0, t1, t2_8, t2_16, t4, ta; vu_long reg; struct mpc5xxx_sdma *psdma = (struct mpc5xxx_sdma *) MPC5XXX_SDMA; diff --git a/cpu/mpc5xxx/serial.c b/cpu/mpc5xxx/serial.c index 91e1def..cacb9f0 100644 --- a/cpu/mpc5xxx/serial.c +++ b/cpu/mpc5xxx/serial.c @@ -33,6 +33,8 @@ #include <common.h> #include <mpc5xxx.h> +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_PSC_CONSOLE) #if CONFIG_PSC_CONSOLE == 1 @@ -55,8 +57,6 @@ int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; unsigned long baseclk; int div; @@ -146,8 +146,6 @@ serial_tstc(void) void serial_setbrg(void) { - DECLARE_GLOBAL_DATA_PTR; - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; unsigned long baseclk, div; diff --git a/cpu/mpc5xxx/speed.c b/cpu/mpc5xxx/speed.c index 4f4e814..7847adc 100644 --- a/cpu/mpc5xxx/speed.c +++ b/cpu/mpc5xxx/speed.c @@ -25,6 +25,8 @@ #include <mpc5xxx.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* Bus-to-Core Multipliers */ @@ -43,8 +45,6 @@ static int bus2core[] = { int get_clocks (void) { - DECLARE_GLOBAL_DATA_PTR; - ulong val, vco; #if !defined(CFG_MPC5XXX_CLKIN) @@ -81,8 +81,6 @@ int get_clocks (void) int prt_mpc5xxx_clks (void) { - DECLARE_GLOBAL_DATA_PTR; - printf(" Bus %ld MHz, IPB %ld MHz, PCI %ld MHz\n", gd->bus_clk / 1000000, gd->ipb_clk / 1000000, gd->pci_clk / 1000000); diff --git a/cpu/mpc8220/cpu.c b/cpu/mpc8220/cpu.c index 0cfe808..be274cd 100644 --- a/cpu/mpc8220/cpu.c +++ b/cpu/mpc8220/cpu.c @@ -31,10 +31,10 @@ #include <mpc8220.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + int checkcpu (void) { - DECLARE_GLOBAL_DATA_PTR; - ulong clock = gd->cpu_clk; char buf[32]; @@ -81,8 +81,6 @@ int do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) */ unsigned long get_tbclk (void) { - DECLARE_GLOBAL_DATA_PTR; - ulong tbclk; tbclk = (gd->bus_clk + 3L) / 4L; diff --git a/cpu/mpc8220/cpu_init.c b/cpu/mpc8220/cpu_init.c index 8c358a8..3cf5f66 100644 --- a/cpu/mpc8220/cpu_init.c +++ b/cpu/mpc8220/cpu_init.c @@ -24,6 +24,8 @@ #include <common.h> #include <mpc8220.h> +DECLARE_GLOBAL_DATA_PTR; + /* * Breath some life into the CPU... * @@ -32,8 +34,6 @@ */ void cpu_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile flexbus8220_t *flexbus = (volatile flexbus8220_t *) MMAP_FB; volatile pcfg8220_t *portcfg = (volatile pcfg8220_t *) MMAP_PCFG; volatile xlbarb8220_t *xlbarb = (volatile xlbarb8220_t *) MMAP_XLBARB; diff --git a/cpu/mpc8220/dramSetup.c b/cpu/mpc8220/dramSetup.c index 1d0d384..08e3172 100644 --- a/cpu/mpc8220/dramSetup.c +++ b/cpu/mpc8220/dramSetup.c @@ -32,6 +32,8 @@ characteristics to initialize the dram on MPC8220 #include "i2cCore.h" #include "dramSetup.h" +DECLARE_GLOBAL_DATA_PTR; + #define SPD_SIZE CFG_SDRAM_SPD_SIZE #define DRAM_SPD (CFG_SDRAM_SPD_I2C_ADDR)<<1 /* on Board SPD eeprom */ #define TOTAL_BANK CFG_SDRAM_TOTAL_BANKS @@ -91,8 +93,6 @@ int spd_readbyte (volatile i2c8220_t * pi2c, u8 * readb, int *index) int readSpdData (u8 * spdData) { - DECLARE_GLOBAL_DATA_PTR; - volatile i2c8220_t *pi2cReg; volatile pcfg8220_t *pcfg; u8 slvAdr = DRAM_SPD; @@ -403,8 +403,6 @@ u8 checkMuxSetting (u8 rows, u8 columns) u32 dramSetup (void) { - DECLARE_GLOBAL_DATA_PTR; - draminfo_t DramInfo[TOTAL_BANK]; draminfo_t *pDramInfo; u32 size, temp, cfg_value, mode_value, refresh; diff --git a/cpu/mpc8220/i2c.c b/cpu/mpc8220/i2c.c index 62f7c0f..d67936d 100644 --- a/cpu/mpc8220/i2c.c +++ b/cpu/mpc8220/i2c.c @@ -23,6 +23,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_HARD_I2C #include <mpc8220.h> @@ -235,7 +237,6 @@ void i2c_init (int speed, int saddr) static int mpc_get_fdr (int speed) { - DECLARE_GLOBAL_DATA_PTR; static int fdr = -1; if (fdr == -1) { diff --git a/cpu/mpc8220/speed.c b/cpu/mpc8220/speed.c index 8346efe..200a762 100644 --- a/cpu/mpc8220/speed.c +++ b/cpu/mpc8220/speed.c @@ -25,6 +25,8 @@ #include <mpc8220.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + typedef struct pllmultiplier { u8 hid1; int multi; @@ -39,8 +41,6 @@ typedef struct pllmultiplier { int get_clocks (void) { - DECLARE_GLOBAL_DATA_PTR; - pllcfg_t bus2core[] = { {0x02, 2, 8}, /* 1 */ {0x01, 2, 4}, @@ -109,8 +109,6 @@ int get_clocks (void) int prt_mpc8220_clks (void) { - DECLARE_GLOBAL_DATA_PTR; - printf (" Bus %ld MHz, CPU %ld MHz, PCI %ld MHz, VCO %ld MHz\n", gd->bus_clk / 1000000, gd->cpu_clk / 1000000, gd->pci_clk / 1000000, gd->vco_clk / 1000000); diff --git a/cpu/mpc8220/uart.c b/cpu/mpc8220/uart.c index 5f54aac..0c4b536 100644 --- a/cpu/mpc8220/uart.c +++ b/cpu/mpc8220/uart.c @@ -30,12 +30,13 @@ #include <common.h> #include <mpc8220.h> +DECLARE_GLOBAL_DATA_PTR; + #define PSC_BASE MMAP_PSC1 #if defined(CONFIG_PSC_CONSOLE) int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; u32 counter; @@ -106,8 +107,6 @@ int serial_tstc (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile psc8220_t *psc = (psc8220_t *) PSC_BASE; u32 counter; diff --git a/cpu/mpc824x/cpu.c b/cpu/mpc824x/cpu.c index 312dfe2..0a45cc8 100644 --- a/cpu/mpc824x/cpu.c +++ b/cpu/mpc824x/cpu.c @@ -26,10 +26,10 @@ #include <common.h> #include <command.h> +DECLARE_GLOBAL_DATA_PTR; + int checkcpu (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned int pvr = get_pvr (); unsigned int version = pvr >> 16; unsigned char revision; diff --git a/cpu/mpc824x/speed.c b/cpu/mpc824x/speed.c index a37a087..fdcb972 100644 --- a/cpu/mpc824x/speed.c +++ b/cpu/mpc824x/speed.c @@ -29,6 +29,8 @@ #include <mpc824x.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* NOTE: This describes the proper use of this file. * @@ -107,8 +109,6 @@ short pllratio_to_factor[] = { /* compute the CPU and memory bus clock frequencies */ int get_clocks (void) { - DECLARE_GLOBAL_DATA_PTR; - uint hid1 = mfspr(HID1); hid1 = (hid1 >> (32-5)) & 0x1f; gd->cpu_clk = (pllratio_to_factor[hid1] * get_bus_freq(0) + 5) diff --git a/cpu/mpc8260/commproc.c b/cpu/mpc8260/commproc.c index e5c5fcf..8777e77 100644 --- a/cpu/mpc8260/commproc.c +++ b/cpu/mpc8260/commproc.c @@ -20,11 +20,11 @@ #include <common.h> #include <asm/cpm_8260.h> +DECLARE_GLOBAL_DATA_PTR; + void m8260_cpm_reset(void) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *)CFG_IMMR; volatile ulong count; @@ -54,8 +54,6 @@ m8260_cpm_reset(void) uint m8260_cpm_dpalloc(uint size, uint align) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *)CFG_IMMR; uint retloc; uint align_mask, off; @@ -112,8 +110,6 @@ m8260_cpm_hostalloc(uint size, uint align) void m8260_cpm_setbrg(uint brg, uint rate) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *)CFG_IMMR; volatile uint *bp; uint cd = BRG_UART_CLK / rate; @@ -137,8 +133,6 @@ m8260_cpm_setbrg(uint brg, uint rate) void m8260_cpm_fastbrg(uint brg, uint rate, int div16) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *)CFG_IMMR; volatile uint *bp; diff --git a/cpu/mpc8260/cpu.c b/cpu/mpc8260/cpu.c index 5d97933..4f23012 100644 --- a/cpu/mpc8260/cpu.c +++ b/cpu/mpc8260/cpu.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2003 + * (C) Copyright 2000-2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -47,10 +47,10 @@ #include <asm/processor.h> #include <asm/cpm_8260.h> +DECLARE_GLOBAL_DATA_PTR; + int checkcpu (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immap = (immap_t *) CFG_IMMR; ulong clock = gd->cpu_clk; uint pvr = get_pvr (); @@ -264,8 +264,6 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) */ unsigned long get_tbclk (void) { - DECLARE_GLOBAL_DATA_PTR; - ulong tbclk; tbclk = (gd->bus_clk + 3L) / 4L; diff --git a/cpu/mpc8260/cpu_init.c b/cpu/mpc8260/cpu_init.c index babcce4..640026b 100644 --- a/cpu/mpc8260/cpu_init.c +++ b/cpu/mpc8260/cpu_init.c @@ -26,6 +26,8 @@ #include <asm/cpm_8260.h> #include <ioports.h> +DECLARE_GLOBAL_DATA_PTR; + static void config_8260_ioports (volatile immap_t * immr) { int portnum; @@ -97,7 +99,6 @@ static void config_8260_ioports (volatile immap_t * immr) */ void cpu_init_f (volatile immap_t * immr) { - DECLARE_GLOBAL_DATA_PTR; #if !defined(CONFIG_COGENT) /* done in start.S for the cogent */ uint sccr; #endif @@ -222,8 +223,6 @@ void cpu_init_f (volatile immap_t * immr) */ int cpu_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *) gd->bd->bi_immr_base; immr->im_cpm.cp_rccr = CFG_RCCR; @@ -236,8 +235,6 @@ int cpu_init_r (void) */ int prt_8260_rsr (void) { - DECLARE_GLOBAL_DATA_PTR; - static struct { ulong mask; char *desc; diff --git a/cpu/mpc8260/ether_fcc.c b/cpu/mpc8260/ether_fcc.c index ed3515f..584c40f 100644 --- a/cpu/mpc8260/ether_fcc.c +++ b/cpu/mpc8260/ether_fcc.c @@ -51,6 +51,8 @@ #include <miiphy.h> #endif +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_COMMANDS & CFG_CMD_NET) && \ defined(CONFIG_NET_MULTI) @@ -644,8 +646,6 @@ swap16 (unsigned short x) void eth_loopback_test (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *)CFG_IMMR; volatile cpm8260_t *cp = &(immr->im_cpm); int c, nclosed; diff --git a/cpu/mpc8260/i2c.c b/cpu/mpc8260/i2c.c index ea97ab8..34bd389 100644 --- a/cpu/mpc8260/i2c.c +++ b/cpu/mpc8260/i2c.c @@ -34,6 +34,8 @@ /* define to enable debug messages */ #undef DEBUG_I2C +DECLARE_GLOBAL_DATA_PTR; + /* uSec to wait between polls of the i2c */ #define DELAY_US 100 /* uSec to wait for the CPM to start processing the buffer */ @@ -213,8 +215,6 @@ static int i2c_setrate(int hz, int speed) void i2c_init(int speed, int slaveadd) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immap = (immap_t *)CFG_IMMR ; volatile cpm8260_t *cp = (cpm8260_t *)&immap->im_cpm; volatile i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; diff --git a/cpu/mpc8260/interrupts.c b/cpu/mpc8260/interrupts.c index b2e4d83..56e9a72 100644 --- a/cpu/mpc8260/interrupts.c +++ b/cpu/mpc8260/interrupts.c @@ -29,6 +29,8 @@ #include <mpc8260_irq.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + /****************************************************************************/ struct irq_action { @@ -140,8 +142,6 @@ static int m8260_get_irq (struct pt_regs *regs) int interrupt_init_cpu (unsigned *decrementer_count) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *) CFG_IMMR; *decrementer_count = (gd->bus_clk / 4) / CFG_HZ; diff --git a/cpu/mpc8260/pci.c b/cpu/mpc8260/pci.c index 44576de..ea5514f 100644 --- a/cpu/mpc8260/pci.c +++ b/cpu/mpc8260/pci.c @@ -33,6 +33,11 @@ #include <mpc8260.h> #include <asm/m8260_pci.h> #include <asm/io.h> + +#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 +DECLARE_GLOBAL_DATA_PTR; +#endif + /* * Local->PCI map (from CPU) controlled by * MPC826x master window @@ -234,9 +239,6 @@ static inline void pci_outl (u32 addr, u32 data) void pci_mpc8250_init (struct pci_controller *hose) { -#if defined CONFIG_MPC8266ADS || defined CONFIG_MPC8272 - DECLARE_GLOBAL_DATA_PTR; -#endif u16 tempShort; volatile immap_t *immap = (immap_t *) CFG_IMMR; diff --git a/cpu/mpc8260/serial_scc.c b/cpu/mpc8260/serial_scc.c index 32016f2..3a6eaf0 100644 --- a/cpu/mpc8260/serial_scc.c +++ b/cpu/mpc8260/serial_scc.c @@ -32,6 +32,8 @@ #include <mpc8260.h> #include <asm/cpm_8260.h> +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_CONS_ON_SCC) #if CONFIG_CONS_INDEX == 1 /* Console on SCC1 */ @@ -181,8 +183,6 @@ int serial_init (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - #if defined(CONFIG_CONS_USE_EXTC) m8260_cpm_extcbrg(SCC_INDEX, gd->baudrate, CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL); diff --git a/cpu/mpc8260/serial_smc.c b/cpu/mpc8260/serial_smc.c index b486f83..f3dffeb 100644 --- a/cpu/mpc8260/serial_smc.c +++ b/cpu/mpc8260/serial_smc.c @@ -34,6 +34,8 @@ #include <mpc8260.h> #include <asm/cpm_8260.h> +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_CONS_ON_SMC) #if CONFIG_CONS_INDEX == 1 /* Console on SMC1 */ @@ -170,8 +172,6 @@ int serial_init (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - #if defined(CONFIG_CONS_USE_EXTC) m8260_cpm_extcbrg(brg_map[SMC_INDEX], gd->baudrate, CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL); diff --git a/cpu/mpc8260/speed.c b/cpu/mpc8260/speed.c index 99afe76..360404f 100644 --- a/cpu/mpc8260/speed.c +++ b/cpu/mpc8260/speed.c @@ -25,6 +25,8 @@ #include <mpc8260.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* Bus-to-Core Multiplier */ @@ -101,8 +103,6 @@ corecnf_t corecnf_tab[] = { int get_clocks (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immap = (immap_t *) CFG_IMMR; ulong clkin; ulong sccr, dfbrg; @@ -159,8 +159,6 @@ int get_clocks (void) int prt_8260_clks (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immap = (immap_t *) CFG_IMMR; ulong sccr, dfbrg; ulong scmr, corecnf, busdf, cpmdf, plldf, pllmf, pcidf; diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index f24d3a4..7ca1ceb 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -38,10 +38,11 @@ #include <ft_build.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + int checkcpu(void) { - DECLARE_GLOBAL_DATA_PTR; ulong clock = gd->cpu_clk; u32 pvr = get_pvr(); char buf[32]; @@ -138,8 +139,6 @@ do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) unsigned long get_tbclk(void) { - DECLARE_GLOBAL_DATA_PTR; - ulong tbclk; tbclk = (gd->bus_clk + 3L) / 4L; diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index acf6862..6ed0992 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -29,6 +29,8 @@ #include <mpc83xx.h> #include <ioports.h> +DECLARE_GLOBAL_DATA_PTR; + /* * Breathe some life into the CPU... * @@ -38,8 +40,6 @@ */ void cpu_init_f (volatile immap_t * im) { - DECLARE_GLOBAL_DATA_PTR; - /* Pointer is writable since we allocated a register for it */ gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET); diff --git a/cpu/mpc83xx/interrupts.c b/cpu/mpc83xx/interrupts.c index dfd51c1..5a0babf 100644 --- a/cpu/mpc83xx/interrupts.c +++ b/cpu/mpc83xx/interrupts.c @@ -35,6 +35,8 @@ #include <mpc83xx.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + struct irq_action { interrupt_handler_t *handler; void *arg; @@ -43,8 +45,6 @@ struct irq_action { int interrupt_init_cpu (unsigned *decrementer_count) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *) CFG_IMMRBAR; *decrementer_count = (gd->bus_clk / 4) / CFG_HZ; diff --git a/cpu/mpc83xx/speed.c b/cpu/mpc83xx/speed.c index 1368fc3..ad6b3f6 100644 --- a/cpu/mpc83xx/speed.c +++ b/cpu/mpc83xx/speed.c @@ -32,6 +32,8 @@ #include <mpc83xx.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + /* ----------------------------------------------------------------- */ typedef enum { @@ -92,7 +94,6 @@ corecnf_t corecnf_tab[] = { */ int get_clocks (void) { - DECLARE_GLOBAL_DATA_PTR; volatile immap_t *im = (immap_t *)CFG_IMMRBAR; u32 pci_sync_in; u8 spmf; @@ -342,14 +343,11 @@ int get_clocks (void) *********************************************/ ulong get_bus_freq (ulong dummy) { - DECLARE_GLOBAL_DATA_PTR; return gd->csb_clk; } int print_clock_conf (void) { - DECLARE_GLOBAL_DATA_PTR; - printf("Clock configuration:\n"); printf(" Coherent System Bus: %4d MHz\n",gd->csb_clk/1000000); printf(" Core: %4d MHz\n",gd->core_clk/1000000); diff --git a/cpu/mpc83xx/traps.c b/cpu/mpc83xx/traps.c index c7a5638..44345af 100644 --- a/cpu/mpc83xx/traps.c +++ b/cpu/mpc83xx/traps.c @@ -40,6 +40,8 @@ #include <asm/processor.h> #include <asm/mpc8349_pci.h> +DECLARE_GLOBAL_DATA_PTR; + /* Returns 0 if exception not found and fixup otherwise. */ extern unsigned long search_exception_table(unsigned long); @@ -52,7 +54,6 @@ extern unsigned long search_exception_table(unsigned long); void print_backtrace(unsigned long *sp) { - DECLARE_GLOBAL_DATA_PTR; int cnt = 0; unsigned long i; diff --git a/cpu/mpc85xx/commproc.c b/cpu/mpc85xx/commproc.c index aa8a5a5..3504d50 100644 --- a/cpu/mpc85xx/commproc.c +++ b/cpu/mpc85xx/commproc.c @@ -24,6 +24,8 @@ #include <common.h> #include <asm/cpm_85xx.h> +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_CPM2) /* * because we have stack and init data in dual port ram @@ -35,8 +37,6 @@ void m8560_cpm_reset(void) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *)CFG_IMMR; volatile ulong count; @@ -64,8 +64,6 @@ m8560_cpm_reset(void) uint m8560_cpm_dpalloc(uint size, uint align) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *)CFG_IMMR; uint retloc; uint align_mask, off; @@ -122,8 +120,6 @@ m8560_cpm_hostalloc(uint size, uint align) void m8560_cpm_setbrg(uint brg, uint rate) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *)CFG_IMMR; volatile uint *bp; @@ -146,8 +142,6 @@ m8560_cpm_setbrg(uint brg, uint rate) void m8560_cpm_fastbrg(uint brg, uint rate, int div16) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *)CFG_IMMR; volatile uint *bp; diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index efde9cc..c12b47b 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -30,6 +30,8 @@ #include <ioports.h> #include <asm/io.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_CPM2 static void config_8560_ioports (volatile immap_t * immr) { @@ -103,7 +105,6 @@ static void config_8560_ioports (volatile immap_t * immr) void cpu_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ccsr_lbc_t *memctl = &immap->im_lbc; extern void m8560_cpm_reset (void); diff --git a/cpu/mpc85xx/serial_scc.c b/cpu/mpc85xx/serial_scc.c index cf060d6..4e925f8 100644 --- a/cpu/mpc85xx/serial_scc.c +++ b/cpu/mpc85xx/serial_scc.c @@ -35,6 +35,8 @@ #include <common.h> #include <asm/cpm_85xx.h> +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_CPM2) #if defined(CONFIG_CONS_ON_SCC) @@ -186,8 +188,6 @@ int serial_init (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - #if defined(CONFIG_CONS_USE_EXTC) m8560_cpm_extcbrg(SCC_INDEX, gd->baudrate, CONFIG_CONS_EXTC_RATE, CONFIG_CONS_EXTC_PINSEL); diff --git a/cpu/mpc85xx/speed.c b/cpu/mpc85xx/speed.c index d736742..ca81ee7 100644 --- a/cpu/mpc85xx/speed.c +++ b/cpu/mpc85xx/speed.c @@ -29,6 +29,8 @@ #include <ppc_asm.tmpl> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + /* --------------------------------------------------------------- */ void get_sys_info (sys_info_t * sysInfo) @@ -80,7 +82,6 @@ void get_sys_info (sys_info_t * sysInfo) int get_clocks (void) { - DECLARE_GLOBAL_DATA_PTR; sys_info_t sys_info; #if defined(CONFIG_CPM2) volatile immap_t *immap = (immap_t *) CFG_IMMR; diff --git a/cpu/mpc85xx/traps.c b/cpu/mpc85xx/traps.c index a87eed2..904f052 100644 --- a/cpu/mpc85xx/traps.c +++ b/cpu/mpc85xx/traps.c @@ -39,6 +39,8 @@ #include <command.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + #if (CONFIG_COMMANDS & CFG_CMD_KGDB) int (*debugger_exception_handler)(struct pt_regs *) = 0; #endif @@ -83,7 +85,6 @@ extern void do_bedbug_breakpoint(struct pt_regs *); void print_backtrace(unsigned long *sp) { - DECLARE_GLOBAL_DATA_PTR; int cnt = 0; unsigned long i; diff --git a/cpu/mpc8xx/commproc.c b/cpu/mpc8xx/commproc.c index 75740e0..07c763c 100644 --- a/cpu/mpc8xx/commproc.c +++ b/cpu/mpc8xx/commproc.c @@ -24,12 +24,12 @@ #include <common.h> #include <commproc.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CFG_ALLOC_DPRAM int dpram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Reclaim the DP memory for our use. */ gd->dp_alloc_base = CPM_DATAONLY_BASE; gd->dp_alloc_top = CPM_DATAONLY_BASE + CPM_DATAONLY_SIZE; @@ -43,7 +43,6 @@ int dpram_init (void) */ uint dpram_alloc (uint size) { - DECLARE_GLOBAL_DATA_PTR; uint addr = gd->dp_alloc_base; if ((gd->dp_alloc_base + size) >= gd->dp_alloc_top) @@ -56,8 +55,6 @@ uint dpram_alloc (uint size) uint dpram_base (void) { - DECLARE_GLOBAL_DATA_PTR; - return gd->dp_alloc_base; } @@ -67,8 +64,6 @@ uint dpram_base (void) */ uint dpram_alloc_align (uint size, uint align) { - DECLARE_GLOBAL_DATA_PTR; - uint addr, mask = align - 1; addr = (gd->dp_alloc_base + mask) & ~mask; @@ -83,8 +78,6 @@ uint dpram_alloc_align (uint size, uint align) uint dpram_base_align (uint align) { - DECLARE_GLOBAL_DATA_PTR; - uint mask = align - 1; return (gd->dp_alloc_base + mask) & ~mask; diff --git a/cpu/mpc8xx/cpu.c b/cpu/mpc8xx/cpu.c index c4a0cba..97112f0 100644 --- a/cpu/mpc8xx/cpu.c +++ b/cpu/mpc8xx/cpu.c @@ -39,6 +39,8 @@ #include <mpc8xx.h> #include <asm/cache.h> +DECLARE_GLOBAL_DATA_PTR; + static char *cpu_warning = "\n " \ "*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***"; @@ -349,8 +351,6 @@ static int check_CPU (long clock, uint pvr, uint immr) int checkcpu (void) { - DECLARE_GLOBAL_DATA_PTR; - ulong clock = gd->cpu_clk; uint immr = get_immr (0); /* Return full IMMR contents */ uint pvr = get_pvr (); @@ -539,8 +539,6 @@ int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) */ unsigned long get_tbclk (void) { - DECLARE_GLOBAL_DATA_PTR; - uint immr = get_immr (0); /* Return full IMMR contents */ volatile immap_t *immap = (volatile immap_t *)(immr & 0xFFFF0000); ulong oscclk, factor, pll; diff --git a/cpu/mpc8xx/cpu_init.c b/cpu/mpc8xx/cpu_init.c index b2c59c6..1a7111f 100644 --- a/cpu/mpc8xx/cpu_init.c +++ b/cpu/mpc8xx/cpu_init.c @@ -27,6 +27,10 @@ #include <mpc8xx.h> #include <commproc.h> +#if defined(CFG_RTCSC) || defined(CFG_RMDS) +DECLARE_GLOBAL_DATA_PTR; +#endif + #if defined(CFG_I2C_UCODE_PATCH) || defined(CFG_SPI_UCODE_PATCH) void cpm_load_patch (volatile immap_t * immr); #endif @@ -259,8 +263,6 @@ void cpu_init_f (volatile immap_t * immr) int cpu_init_r (void) { #if defined(CFG_RTCSC) || defined(CFG_RMDS) - DECLARE_GLOBAL_DATA_PTR; - bd_t *bd = gd->bd; volatile immap_t *immr = (volatile immap_t *) (bd->bi_immr_base); #endif diff --git a/cpu/mpc8xx/fec.c b/cpu/mpc8xx/fec.c index d2f5d88..6006478 100644 --- a/cpu/mpc8xx/fec.c +++ b/cpu/mpc8xx/fec.c @@ -27,6 +27,8 @@ #include <net.h> #include <command.h> +DECLARE_GLOBAL_DATA_PTR; + #undef ET_DEBUG #if (CONFIG_COMMANDS & CFG_CMD_NET) && \ @@ -371,7 +373,6 @@ static inline void fec_half_duplex(struct eth_device *dev) static void fec_pin_init(int fecidx) { - DECLARE_GLOBAL_DATA_PTR; bd_t *bd = gd->bd; volatile immap_t *immr = (immap_t *) CFG_IMMR; volatile fec_t *fecp; diff --git a/cpu/mpc8xx/i2c.c b/cpu/mpc8xx/i2c.c index 682db53..6c59374 100644 --- a/cpu/mpc8xx/i2c.c +++ b/cpu/mpc8xx/i2c.c @@ -37,6 +37,8 @@ #include <watchdog.h> #endif +DECLARE_GLOBAL_DATA_PTR; + /* define to enable debug messages */ #undef DEBUG_I2C @@ -205,8 +207,6 @@ i2c_setrate (int hz, int speed) void i2c_init(int speed, int slaveaddr) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immap = (immap_t *)CFG_IMMR ; volatile cpm8xx_t *cp = (cpm8xx_t *)&immap->im_cpm; volatile i2c8xx_t *i2c = (i2c8xx_t *)&immap->im_i2c; @@ -615,8 +615,6 @@ int i2c_probe(uchar chip) int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) { - DECLARE_GLOBAL_DATA_PTR; - i2c_state_t state; uchar xaddr[4]; int rc; @@ -671,8 +669,6 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) { - DECLARE_GLOBAL_DATA_PTR; - i2c_state_t state; uchar xaddr[4]; int rc; diff --git a/cpu/mpc8xx/serial.c b/cpu/mpc8xx/serial.c index fa0405f..26a82cc 100644 --- a/cpu/mpc8xx/serial.c +++ b/cpu/mpc8xx/serial.c @@ -27,6 +27,8 @@ #include <serial.h> #include <watchdog.h> +DECLARE_GLOBAL_DATA_PTR; + #if !defined(CONFIG_8xx_CONS_NONE) /* No Console at all */ #if defined(CONFIG_8xx_CONS_SMC1) /* Console on SMC1 */ @@ -65,7 +67,6 @@ static void serial_setdivisor(volatile cpm8xx_t *cp) { - DECLARE_GLOBAL_DATA_PTR; int divisor=(gd->cpu_clk + 8*gd->baudrate)/16/gd->baudrate; if(divisor/16>0x1000) { @@ -268,8 +269,6 @@ smc_putc(const char c) volatile cpm8xx_t *cpmp = &(im->im_cpm); #ifdef CONFIG_MODEM_SUPPORT - DECLARE_GLOBAL_DATA_PTR; - if (gd->be_quiet) return; #endif @@ -553,8 +552,6 @@ scc_putc(const char c) volatile cpm8xx_t *cpmp = &(im->im_cpm); #ifdef CONFIG_MODEM_SUPPORT - DECLARE_GLOBAL_DATA_PTR; - if (gd->be_quiet) return; #endif @@ -649,13 +646,11 @@ struct serial_device serial_scc_device = #ifdef CONFIG_MODEM_SUPPORT void disable_putc(void) { - DECLARE_GLOBAL_DATA_PTR; gd->be_quiet = 1; } void enable_putc(void) { - DECLARE_GLOBAL_DATA_PTR; gd->be_quiet = 0; } #endif diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c index f038316..57f91c0 100644 --- a/cpu/mpc8xx/speed.c +++ b/cpu/mpc8xx/speed.c @@ -25,6 +25,8 @@ #include <mpc8xx.h> #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + #if !defined(CONFIG_8xx_CPUCLK_DEFAULT) || defined(CFG_MEASURE_CPUCLK) || defined(DEBUG) #define PITC_SHIFT 16 @@ -181,8 +183,6 @@ unsigned long measure_gclk(void) */ int get_clocks (void) { - DECLARE_GLOBAL_DATA_PTR; - uint immr = get_immr (0); /* Return full IMMR contents */ volatile immap_t *immap = (immap_t *) (immr & 0xFFFF0000); uint sccr = immap->im_clkrst.car_sccr; @@ -238,8 +238,6 @@ static long init_pll_866 (long clk); */ int get_clocks_866 (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *) CFG_IMMR; char tmp[64]; long cpuclk = 0; @@ -277,8 +275,6 @@ int get_clocks_866 (void) */ int sdram_adjust_866 (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *) CFG_IMMR; long mamr; @@ -371,8 +367,6 @@ static long init_pll_866 (long clk) */ int adjust_sdram_tbs_8xx (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *) CFG_IMMR; long mamr; long sccr; diff --git a/cpu/mpc8xx/video.c b/cpu/mpc8xx/video.c index ee60477..918de67 100644 --- a/cpu/mpc8xx/video.c +++ b/cpu/mpc8xx/video.c @@ -39,6 +39,8 @@ #ifdef CONFIG_VIDEO +DECLARE_GLOBAL_DATA_PTR; + /************************************************************************/ /* ** DEBUG SETTINGS */ /************************************************************************/ @@ -1164,7 +1166,6 @@ static void *video_logo (void) u16 *screen = video_fb_address, width = VIDEO_COLS; #ifdef VIDEO_INFO # ifndef CONFIG_FADS - DECLARE_GLOBAL_DATA_PTR; char temp[32]; # endif char info[80]; @@ -1282,8 +1283,6 @@ static int video_init (void *videobase) int drv_video_init (void) { - DECLARE_GLOBAL_DATA_PTR; - int error, devices = 1; device_t videodev; diff --git a/cpu/nios/serial.c b/cpu/nios/serial.c index 4bdda25..5ecdc6d 100644 --- a/cpu/nios/serial.c +++ b/cpu/nios/serial.c @@ -26,6 +26,8 @@ #include <watchdog.h> #include <nios-io.h> +DECLARE_GLOBAL_DATA_PTR; + /*------------------------------------------------------------------ * JTAG acts as the serial port *-----------------------------------------------------------------*/ @@ -83,7 +85,6 @@ int serial_init (void) { return (0);} void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; unsigned div; div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1; diff --git a/cpu/nios2/serial.c b/cpu/nios2/serial.c index 2d08c93..3d76603 100644 --- a/cpu/nios2/serial.c +++ b/cpu/nios2/serial.c @@ -27,6 +27,8 @@ #include <nios2.h> #include <nios2-io.h> +DECLARE_GLOBAL_DATA_PTR; + /*------------------------------------------------------------------ * JTAG acts as the serial port *-----------------------------------------------------------------*/ @@ -93,7 +95,6 @@ int serial_init (void) { return (0);} void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; unsigned div; div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1; diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 947b85e..fad895b 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -77,6 +77,8 @@ #include <asm/processor.h> #include <pci.h> +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_405GP) || defined(CONFIG_405EP) #ifdef CONFIG_PCI @@ -92,8 +94,6 @@ ushort pmc405_pci_subsys_deviceid(void); *-----------------------------------------------------------------------------*/ void pci_405gp_init(struct pci_controller *hose) { - DECLARE_GLOBAL_DATA_PTR; - int i, reg_num = 0; bd_t *bd = gd->bd; diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index a26533c..0cd72b0 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -37,6 +37,10 @@ #include <asm/cache.h> #include <ppc4xx.h> +#if !defined(CONFIG_405) +DECLARE_GLOBAL_DATA_PTR; +#endif + #if defined(CONFIG_440) #define FREQ_EBC (sys_info.freqEPB) @@ -116,7 +120,6 @@ static int do_chip_reset(unsigned long sys0, unsigned long sys1); int checkcpu (void) { #if !defined(CONFIG_405) /* not used on Xilinx 405 FPGA implementations */ - DECLARE_GLOBAL_DATA_PTR; uint pvr = get_pvr(); ulong clock = gd->cpu_clk; char buf[32]; diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 79cfba3..1a139d7 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -27,6 +27,10 @@ #include <asm/processor.h> #include <ppc4xx.h> +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) +DECLARE_GLOBAL_DATA_PTR; +#endif + #define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data) @@ -209,8 +213,6 @@ cpu_init_f (void) int cpu_init_r (void) { #if defined(CONFIG_405GP) || defined(CONFIG_405EP) - DECLARE_GLOBAL_DATA_PTR; - bd_t *bd = gd->bd; unsigned long reg; #if defined(CONFIG_405GP) diff --git a/cpu/ppc4xx/i2c.c b/cpu/ppc4xx/i2c.c index be94b57..7db1cd8 100644 --- a/cpu/ppc4xx/i2c.c +++ b/cpu/ppc4xx/i2c.c @@ -16,6 +16,8 @@ #ifdef CONFIG_HARD_I2C +DECLARE_GLOBAL_DATA_PTR; + #define IIC_OK 0 #define IIC_NOK 1 #define IIC_NOK_LA 2 /* Lost arbitration */ @@ -350,7 +352,6 @@ int i2c_read (uchar chip, uint addr, int alen, uchar * buffer, int len) { uchar xaddr[4]; int ret; - DECLARE_GLOBAL_DATA_PTR; if ( alen > 4 ) { printf ("I2C read: addr len %d not supported\n", alen); diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c index 1d8dc7c..3aae4ce 100644 --- a/cpu/ppc4xx/interrupts.c +++ b/cpu/ppc4xx/interrupts.c @@ -36,6 +36,8 @@ #include <commproc.h> #include "vecnum.h" +DECLARE_GLOBAL_DATA_PTR; + /****************************************************************************/ /* @@ -96,8 +98,6 @@ static __inline__ void set_evpr(unsigned long val) int interrupt_init_cpu (unsigned *decrementer_count) { - DECLARE_GLOBAL_DATA_PTR; - int vec; unsigned long val; diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c index e9548cd..c5ab017 100644 --- a/cpu/ppc4xx/sdram.c +++ b/cpu/ppc4xx/sdram.c @@ -1,7 +1,10 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2006 * Stefan Roese, DENX Software Engineering, sr@denx.de. * + * (C) Copyright 2006 + * DAVE Srl <www.dave-tech.it> + * * (C) Copyright 2002-2004 * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com * @@ -27,28 +30,19 @@ #include <common.h> #include <ppc4xx.h> #include <asm/processor.h> +#include "sdram.h" #ifdef CONFIG_SDRAM_BANK0 -#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data) - - -struct sdram_conf_s { - unsigned long size; - unsigned long reg; -}; - -typedef struct sdram_conf_s sdram_conf_t; - #ifndef CFG_SDRAM_TABLE sdram_conf_t mb0cf[] = { - {(128 << 20), 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */ - {(64 << 20), 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */ - {(32 << 20), 0x00062001}, /* (0-32MB) Address Mode 2, 12x9(4) */ - {(16 << 20), 0x00046001}, /* (0-16MB) Address Mode 4, 12x8(4) */ - {(4 << 20), 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */ + {(128 << 20), 13, 0x000A4001}, /* (0-128MB) Address Mode 3, 13x10(4) */ + {(64 << 20), 13, 0x00084001}, /* (0-64MB) Address Mode 3, 13x9(4) */ + {(32 << 20), 12, 0x00062001}, /* (0-32MB) Address Mode 2, 12x9(4) */ + {(16 << 20), 12, 0x00046001}, /* (0-16MB) Address Mode 4, 12x8(4) */ + {(4 << 20), 11, 0x00008001}, /* (0-4MB) Address Mode 5, 11x8(2) */ }; #else sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE; @@ -59,31 +53,138 @@ sdram_conf_t mb0cf[] = CFG_SDRAM_TABLE; #ifndef CONFIG_440 +#ifdef CFG_SDRAM_CASL +static ulong ns2clks(ulong ns) +{ + ulong bus_period_x_10 = ONE_BILLION / (get_bus_freq(0) / 10); + + return ((ns * 10) + bus_period_x_10) / bus_period_x_10; +} +#endif /* CFG_SDRAM_CASL */ + +static ulong compute_sdtr1(ulong speed) +{ +#ifdef CFG_SDRAM_CASL + ulong tmp; + ulong sdtr1 = 0; + + /* CASL */ + if (CFG_SDRAM_CASL < 2) + sdtr1 |= (1 << SDRAM0_TR_CASL); + else + if (CFG_SDRAM_CASL > 4) + sdtr1 |= (3 << SDRAM0_TR_CASL); + else + sdtr1 |= ((CFG_SDRAM_CASL-1) << SDRAM0_TR_CASL); + + /* PTA */ + tmp = ns2clks(CFG_SDRAM_PTA); + if ((tmp >= 2) && (tmp <= 4)) + sdtr1 |= ((tmp-1) << SDRAM0_TR_PTA); + else + sdtr1 |= ((4-1) << SDRAM0_TR_PTA); + + /* CTP */ + tmp = ns2clks(CFG_SDRAM_CTP); + if ((tmp >= 2) && (tmp <= 4)) + sdtr1 |= ((tmp-1) << SDRAM0_TR_CTP); + else + sdtr1 |= ((4-1) << SDRAM0_TR_CTP); + + /* LDF */ + tmp = ns2clks(CFG_SDRAM_LDF); + if ((tmp >= 2) && (tmp <= 4)) + sdtr1 |= ((tmp-1) << SDRAM0_TR_LDF); + else + sdtr1 |= ((2-1) << SDRAM0_TR_LDF); + + /* RFTA */ + tmp = ns2clks(CFG_SDRAM_RFTA); + if ((tmp >= 4) && (tmp <= 10)) + sdtr1 |= ((tmp-4) << SDRAM0_TR_RFTA); + else + sdtr1 |= ((10-4) << SDRAM0_TR_RFTA); + + /* RCD */ + tmp = ns2clks(CFG_SDRAM_RCD); + if ((tmp >= 2) && (tmp <= 4)) + sdtr1 |= ((tmp-1) << SDRAM0_TR_RCD); + else + sdtr1 |= ((4-1) << SDRAM0_TR_RCD); + + return sdtr1; +#else /* CFG_SDRAM_CASL */ + /* + * If no values are configured in the board config file + * use the default values, which seem to be ok for most + * boards. + * + * REMARK: + * For new board ports we strongly recommend to define the + * correct values for the used SDRAM chips in your board + * config file (see PPChameleonEVB.h) + */ + if (speed > 100000000) { + /* + * 133 MHz SDRAM + */ + return 0x01074015; + } else { + /* + * default: 100 MHz SDRAM + */ + return 0x0086400d; + } +#endif /* CFG_SDRAM_CASL */ +} + +/* refresh is expressed in ms */ +static ulong compute_rtr(ulong speed, ulong rows, ulong refresh) +{ +#ifdef CFG_SDRAM_CASL + ulong tmp; + + tmp = ((refresh*1000*1000) / (1 << rows)) * (speed / 1000); + tmp /= 1000000; + + return ((tmp & 0x00003FF8) << 16); +#else /* CFG_SDRAM_CASL */ + if (speed > 100000000) { + /* + * 133 MHz SDRAM + */ + return 0x07f00000; + } else { + /* + * default: 100 MHz SDRAM + */ + return 0x05f00000; + } +#endif /* CFG_SDRAM_CASL */ +} + /* * Autodetect onboard SDRAM on 405 platforms */ void sdram_init(void) { + ulong speed; ulong sdtr1; - ulong rtr; int i; - /* - * Support for 100MHz and 133MHz SDRAM - */ - if (get_bus_freq(0) > 100000000) { - /* - * 133 MHz SDRAM - */ - sdtr1 = 0x01074015; - rtr = 0x07f00000; - } else { - /* - * default: 100 MHz SDRAM - */ - sdtr1 = 0x0086400d; - rtr = 0x05f00000; - } + /* + * Determine SDRAM speed + */ + speed = get_bus_freq(0); /* parameter not used on ppc4xx */ + + /* + * sdtr1 (register SDRAM0_TR) must take into account timings listed + * in SDRAM chip datasheet. rtr (register SDRAM0_RTR) must take into + * account actual SDRAM size. So we can set up sdtr1 according to what + * is specified in board configuration file while rtr dependds on SDRAM + * size we are assuming before detection. + */ + sdtr1 = compute_sdtr1(speed); for (i=0; i<N_MB0CF; i++) { /* @@ -96,7 +197,7 @@ void sdram_init(void) */ mtsdram0(mem_mb0cf, mb0cf[i].reg); mtsdram0(mem_sdtr1, sdtr1); - mtsdram0(mem_rtr, rtr); + mtsdram0(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64)); udelay(200); @@ -120,6 +221,124 @@ void sdram_init(void) #else /* CONFIG_440 */ +#define NUM_TRIES 64 +#define NUM_READS 10 + +static void sdram_tr1_set(int ram_address, int* tr1_value) +{ + int i; + int j, k; + volatile unsigned int* ram_pointer = (unsigned int *)ram_address; + int first_good = -1, last_bad = 0x1ff; + + unsigned long test[NUM_TRIES] = { + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0x00000000, 0x00000000, 0xFFFFFFFF, 0xFFFFFFFF, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xFFFFFFFF, 0xFFFFFFFF, 0x00000000, 0x00000000, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0xAAAAAAAA, 0xAAAAAAAA, 0x55555555, 0x55555555, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0x55555555, 0x55555555, 0xAAAAAAAA, 0xAAAAAAAA, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0xA5A5A5A5, 0xA5A5A5A5, 0x5A5A5A5A, 0x5A5A5A5A, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0x5A5A5A5A, 0x5A5A5A5A, 0xA5A5A5A5, 0xA5A5A5A5, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0xAA55AA55, 0xAA55AA55, 0x55AA55AA, 0x55AA55AA, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55, + 0x55AA55AA, 0x55AA55AA, 0xAA55AA55, 0xAA55AA55 }; + + /* go through all possible SDRAM0_TR1[RDCT] values */ + for (i=0; i<=0x1ff; i++) { + /* set the current value for TR1 */ + mtsdram(mem_tr1, (0x80800800 | i)); + + /* write values */ + for (j=0; j<NUM_TRIES; j++) { + ram_pointer[j] = test[j]; + + /* clear any cache at ram location */ + __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); + } + + /* read values back */ + for (j=0; j<NUM_TRIES; j++) { + for (k=0; k<NUM_READS; k++) { + /* clear any cache at ram location */ + __asm__("dcbf 0,%0": :"r" (&ram_pointer[j])); + + if (ram_pointer[j] != test[j]) + break; + } + + /* read error */ + if (k != NUM_READS) + break; + } + + /* we have a SDRAM0_TR1[RDCT] that is part of the window */ + if (j == NUM_TRIES) { + if (first_good == -1) + first_good = i; /* found beginning of window */ + } else { /* bad read */ + /* if we have not had a good read then don't care */ + if (first_good != -1) { + /* first failure after a good read */ + last_bad = i-1; + break; + } + } + } + + /* return the current value for TR1 */ + *tr1_value = (first_good + last_bad) / 2; +} + + +#ifdef CONFIG_SDRAM_ECC +static void ecc_init(ulong start, ulong size) +{ + ulong current_addr; /* current byte address */ + ulong end_addr; /* end of memory region */ + ulong addr_inc; /* address skip between writes */ + ulong cfg0_reg; /* for restoring ECC state */ + + /* + * TODO: Enable dcache before running this test (speedup) + */ + + mfsdram(mem_cfg0, cfg0_reg); + mtsdram(mem_cfg0, (cfg0_reg & ~SDRAM_CFG0_MEMCHK) | SDRAM_CFG0_MEMCHK_GEN); + + /* + * look at geometry of SDRAM (data width) to determine whether we + * can skip words when writing + */ + if ((cfg0_reg & SDRAM_CFG0_DRAMWDTH) == SDRAM_CFG0_DRAMWDTH_32) + addr_inc = 4; + else + addr_inc = 8; + + current_addr = start; + end_addr = start + size; + + while (current_addr < end_addr) { + *((ulong *)current_addr) = 0x00000000; + current_addr += addr_inc; + } + + /* + * TODO: Flush dcache and disable it again + */ + + /* + * Enable ecc checking and parity errors + */ + mtsdram(mem_cfg0, (cfg0_reg & ~SDRAM_CFG0_MEMCHK) | SDRAM_CFG0_MEMCHK_CHK); +} +#endif + /* * Autodetect onboard DDR SDRAM on 440 platforms * @@ -130,6 +349,7 @@ void sdram_init(void) long int initdram(int board_type) { int i; + int tr1_bank1; for (i=0; i<N_MB0CF; i++) { /* @@ -164,6 +384,16 @@ long int initdram(int board_type) if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) { /* + * Optimize TR1 to current hardware environment + */ + sdram_tr1_set(0x00000000, &tr1_bank1); + mtsdram(mem_tr1, (tr1_bank1 | 0x80800800)); + +#ifdef CONFIG_SDRAM_ECC + ecc_init(0, mb0cf[i].size); +#endif + + /* * OK, size detected -> all done */ return mb0cf[i].size; diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h new file mode 100644 index 0000000..62b5442 --- /dev/null +++ b/cpu/ppc4xx/sdram.h @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2006 + * DAVE Srl <www.dave-tech.it> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _SDRAM_H_ +#define _SDRAM_H_ + +#include <config.h> + +#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data) + +#define ONE_BILLION 1000000000 + +struct sdram_conf_s { + unsigned long size; + int rows; + unsigned long reg; +}; + +typedef struct sdram_conf_s sdram_conf_t; + +/* Bitfields offsets */ +#define SDRAM0_TR_CASL (31 - 8) +#define SDRAM0_TR_PTA (31 - 13) +#define SDRAM0_TR_CTP (31 - 15) +#define SDRAM0_TR_LDF (31 - 17) +#define SDRAM0_TR_RFTA (31 - 29) +#define SDRAM0_TR_RCD (31 - 31) + +#ifdef CFG_SDRAM_CL +/* SDRAM timings [ns] according to AMCC/IBM names (see SDRAM_faq.doc) */ +#define CFG_SDRAM_CASL CFG_SDRAM_CL +#define CFG_SDRAM_PTA CFG_SDRAM_tRP +#define CFG_SDRAM_CTP (CFG_SDRAM_tRC - CFG_SDRAM_tRCD - CFG_SDRAM_tRP) +#define CFG_SDRAM_LDF 0 +#ifdef CFG_SDRAM_tRFC +#define CFG_SDRAM_RFTA CFG_SDRAM_tRFC +#else +#define CFG_SDRAM_RFTA CFG_SDRAM_tRC +#endif +#define CFG_SDRAM_RCD CFG_SDRAM_tRCD +#endif /* #ifdef CFG_SDRAM_CL */ + +/* + * Some defines for the 440 DDR controller + */ +#define SDRAM_CFG0_DC_EN 0x80000000 /* SDRAM Controller Enable */ +#define SDRAM_CFG0_MEMCHK 0x30000000 /* Memory data error checking mask*/ +#define SDRAM_CFG0_MEMCHK_NON 0x00000000 /* No ECC generation */ +#define SDRAM_CFG0_MEMCHK_GEN 0x20000000 /* ECC generation */ +#define SDRAM_CFG0_MEMCHK_CHK 0x30000000 /* ECC generation and checking */ +#define SDRAM_CFG0_DRAMWDTH 0x02000000 /* DRAM width mask */ +#define SDRAM_CFG0_DRAMWDTH_32 0x00000000 /* 32 bits */ +#define SDRAM_CFG0_DRAMWDTH_64 0x02000000 /* 64 bits */ + +#endif diff --git a/cpu/ppc4xx/serial.c b/cpu/ppc4xx/serial.c index e7f6bcb..83c9479 100644 --- a/cpu/ppc4xx/serial.c +++ b/cpu/ppc4xx/serial.c @@ -59,6 +59,8 @@ #include <malloc.h> #endif +DECLARE_GLOBAL_DATA_PTR; + /*****************************************************************************/ #ifdef CONFIG_IOP480 @@ -161,8 +163,6 @@ int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile char val; unsigned short br_reg; @@ -185,8 +185,6 @@ int serial_init (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned short br_reg; br_reg = ((((CONFIG_CPUCLOCK * 1000000) / 16) / gd->baudrate) - 1); @@ -431,8 +429,6 @@ int serial_init_dev (unsigned long dev_base) int serial_init(void) #endif { - DECLARE_GLOBAL_DATA_PTR; - unsigned long reg; unsigned long udiv; unsigned short bdiv; @@ -520,8 +516,6 @@ int serial_init_dev (unsigned long dev_base) int serial_init (void) #endif { - DECLARE_GLOBAL_DATA_PTR; - unsigned long reg; unsigned long tmp; unsigned long clk; @@ -597,8 +591,6 @@ void serial_setbrg_dev (unsigned long dev_base) void serial_setbrg (void) #endif { - DECLARE_GLOBAL_DATA_PTR; - unsigned long tmp; unsigned long clk; unsigned long udiv; @@ -880,8 +872,6 @@ int serial_buffered_tstc (void) #if (CONFIG_KGDB_SER_INDEX & 2) void kgdb_serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile char val; unsigned short br_reg; diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c index 553c491..02b4383 100644 --- a/cpu/ppc4xx/speed.c +++ b/cpu/ppc4xx/speed.c @@ -26,7 +26,7 @@ #include <ppc4xx.h> #include <asm/processor.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; #define ONE_BILLION 1000000000 @@ -522,8 +522,6 @@ ulong get_PCI_freq (void) int get_clocks (void) { #if defined(CONFIG_405GP) || defined(CONFIG_405CR) || defined(CONFIG_440) || defined(CONFIG_405) || defined(CONFIG_405EP) - DECLARE_GLOBAL_DATA_PTR; - sys_info_t sys_info; get_sys_info (&sys_info); @@ -533,8 +531,6 @@ int get_clocks (void) #endif /* defined(CONFIG_405GP) || defined(CONFIG_405CR) */ #ifdef CONFIG_IOP480 - DECLARE_GLOBAL_DATA_PTR; - gd->cpu_clk = 66000000; gd->bus_clk = 66000000; #endif diff --git a/cpu/pxa/cpu.c b/cpu/pxa/cpu.c index b33d674..0ee8180 100644 --- a/cpu/pxa/cpu.c +++ b/cpu/pxa/cpu.c @@ -34,14 +34,16 @@ #include <command.h> #include <asm/arch/pxa-regs.h> +#ifdef CONFIG_USE_IRQ +DECLARE_GLOBAL_DATA_PTR; +#endif + int cpu_init (void) { /* * setup up stacks if necessary */ #ifdef CONFIG_USE_IRQ - DECLARE_GLOBAL_DATA_PTR; - IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; #endif diff --git a/cpu/pxa/i2c.c b/cpu/pxa/i2c.c index b6155b1..722d949 100644 --- a/cpu/pxa/i2c.c +++ b/cpu/pxa/i2c.c @@ -47,7 +47,13 @@ /*#define DEBUG_I2C 1 /###* activate local debugging output */ #define I2C_PXA_SLAVE_ADDR 0x1 /* slave pxa unit address */ -#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) + +#if (CFG_I2C_SPEED == 400000) +#define I2C_ICR_INIT (ICR_FM | ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) +#else +#define I2C_ICR_INIT (ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE) +#endif + #define I2C_ISR_INIT 0x7FF #ifdef DEBUG_I2C @@ -91,7 +97,11 @@ static void i2c_reset( void ) ICR |= ICR_UR; /* reset the unit */ udelay(100); ICR &= ~ICR_IUE; /* disable unit */ +#ifdef CONFIG_CPU_MONAHANS + CKENB |= (CKENB_4_I2C); /* | CKENB_1_PWM1 | CKENB_0_PWM0); */ +#else /* CONFIG_CPU_MONAHANS */ CKEN |= CKEN14_I2C; /* set the global I2C clock on */ +#endif ISAR = I2C_PXA_SLAVE_ADDR; /* set our slave address */ ICR = I2C_ICR_INIT; /* set control register values */ ISR = I2C_ISR_INIT; /* set clear interrupt bits */ @@ -104,9 +114,8 @@ static void i2c_reset( void ) * i2c_isr_set_cleared: - wait until certain bits of the I2C status register * are set and cleared * - * @return: 0 in case of success, 1 means timeout (no match within 10 ms). + * @return: 1 in case of success, 0 means timeout (no match within 10 ms). */ - static int i2c_isr_set_cleared( unsigned long set_mask, unsigned long cleared_mask ) { int timeout = 10000; @@ -360,9 +369,9 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) msg.data = 0x00; if ((ret=i2c_transfer(&msg))) return -1; - *(buffer++) = msg.data; - + *buffer = msg.data; PRINTD(("i2c_read: reading byte (0x%08x)=0x%02x\n",(unsigned int)buffer,*buffer)); + buffer++; } diff --git a/cpu/pxa/serial.c b/cpu/pxa/serial.c index 9bf2a7c..cb3a478 100644 --- a/cpu/pxa/serial.c +++ b/cpu/pxa/serial.c @@ -32,10 +32,10 @@ #include <watchdog.h> #include <asm/arch/pxa-regs.h> +DECLARE_GLOBAL_DATA_PTR; + void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned int quot = 0; if (gd->baudrate == 1200) diff --git a/cpu/pxa/start.S b/cpu/pxa/start.S index 9541c9b..ffaa30f 100644 --- a/cpu/pxa/start.S +++ b/cpu/pxa/start.S @@ -190,6 +190,14 @@ OSTIMER_BASE: .word 0x40a00000 #define OIER 0x1C /* Clock Manager Registers */ +#ifdef CONFIG_CPU_MONAHANS +# ifndef CFG_MONAHANS_RUN_MODE_OSC_RATIO +# error "You have to define CFG_MONAHANS_RUN_MODE_OSC_RATIO!!" +# endif +# ifndef CFG_MONAHANS_TURBO_RUN_MODE_RATIO +# define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 0x1 +# endif +#else /* ! CONFIG_CPU_MONAHANS */ #ifdef CFG_CPUSPEED CC_BASE: .word 0x41300000 #define CCCR 0x00 @@ -197,6 +205,7 @@ cpuspeed: .word CFG_CPUSPEED #else #error "You have to define CFG_CPUSPEED!!" #endif +#endif /* CONFIG_CPU_MONAHANS */ /* takes care the CP15 update has taken place */ .macro CPWAIT reg @@ -233,9 +242,13 @@ cpu_init_crit: str r2, [r1] #endif -#ifndef CONFIG_CPU_MONAHANS + /* set clock speed */ +#ifdef CONFIG_CPU_MONAHANS + ldr r0, =ACCR + ldr r1, =(((CFG_MONAHANS_TURBO_RUN_MODE_RATIO<<8) & ACCR_XN_MASK) | (CFG_MONAHANS_RUN_MODE_OSC_RATIO & ACCR_XL_MASK)) + str r1, [r0] +#else /* ! CONFIG_CPU_MONAHANS */ #ifdef CFG_CPUSPEED - /* set clock speed tbd@mk: required for monahans? */ ldr r0, CC_BASE ldr r1, cpuspeed str r1, [r0, #CCCR] diff --git a/cpu/s3c44b0/serial.c b/cpu/s3c44b0/serial.c index 70b4ee8..95d0266 100644 --- a/cpu/s3c44b0/serial.c +++ b/cpu/s3c44b0/serial.c @@ -37,6 +37,8 @@ #include <common.h> #include <asm/hardware.h> +DECLARE_GLOBAL_DATA_PTR; + /* flush serial input queue. returns 0 on success or negative error * number otherwise */ @@ -68,8 +70,6 @@ static int serial_flush_output(void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - u32 divisor = 0; /* get correct divisor */ diff --git a/cpu/sa1100/cpu.c b/cpu/sa1100/cpu.c index 17e5b0d..f1bd644 100644 --- a/cpu/sa1100/cpu.c +++ b/cpu/sa1100/cpu.c @@ -33,14 +33,16 @@ #include <common.h> #include <command.h> +#ifdef CONFIG_USE_IRQ +DECLARE_GLOBAL_DATA_PTR; +#endif + int cpu_init (void) { /* * setup up stacks if necessary */ #ifdef CONFIG_USE_IRQ - DECLARE_GLOBAL_DATA_PTR; - IRQ_STACK_START = _armboot_start - CFG_MALLOC_LEN - CFG_GBL_DATA_SIZE - 4; FIQ_STACK_START = IRQ_STACK_START - CONFIG_STACKSIZE_IRQ; #endif diff --git a/cpu/sa1100/serial.c b/cpu/sa1100/serial.c index a598489..5d18875 100644 --- a/cpu/sa1100/serial.c +++ b/cpu/sa1100/serial.c @@ -31,10 +31,10 @@ #include <common.h> #include <SA-1100.h> +DECLARE_GLOBAL_DATA_PTR; + void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned int reg = 0; if (gd->baudrate == 1200) diff --git a/drivers/cfi_flash.c b/drivers/cfi_flash.c index a989d34..2e37480 100644 --- a/drivers/cfi_flash.c +++ b/drivers/cfi_flash.c @@ -117,6 +117,7 @@ #define FLASH_OFFSET_CFI 0x55 #define FLASH_OFFSET_CFI_RESP 0x10 #define FLASH_OFFSET_PRIMARY_VENDOR 0x13 +#define FLASH_OFFSET_EXT_QUERY_T_P_ADDR 0x15 /* extended query table primary addr */ #define FLASH_OFFSET_WTOUT 0x1F #define FLASH_OFFSET_WBTOUT 0x20 #define FLASH_OFFSET_ETOUT 0x21 @@ -346,6 +347,10 @@ unsigned long flash_init (void) unsigned long size = 0; int i; +#ifdef CFG_FLASH_PROTECTION + char *s = getenv("unlock"); +#endif + /* Init: no FLASHes known */ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) { flash_info[i].flash_id = FLASH_UNKNOWN; @@ -357,15 +362,39 @@ unsigned long flash_init (void) #endif /* CFG_FLASH_QUIET_TEST */ } #ifdef CFG_FLASH_PROTECTION - else { - char *s = getenv("unlock"); + else if ((s != NULL) && (strcmp(s, "yes") == 0)) { + /* + * Only the U-Boot image and it's environment is protected, + * all other sectors are unprotected (unlocked) if flash + * hardware protection is used (CFG_FLASH_PROTECTION) and + * the environment variable "unlock" is set to "yes". + */ + if (flash_info[i].legacy_unlock) { + int k; + + /* + * Disable legacy_unlock temporarily, since + * flash_real_protect would relock all other sectors + * again otherwise. + */ + flash_info[i].legacy_unlock = 0; - if (((s = getenv("unlock")) != NULL) && (strcmp(s, "yes") == 0)) { /* - * Only the U-Boot image and it's environment is protected, - * all other sectors are unprotected (unlocked) if flash - * hardware protection is used (CFG_FLASH_PROTECTION) and - * the environment variable "unlock" is set to "yes". + * Legacy unlocking (e.g. Intel J3) -> unlock only one + * sector. This will unlock all sectors. + */ + flash_real_protect (&flash_info[i], 0, 0); + + flash_info[i].legacy_unlock = 1; + + /* + * Manually mark other sectors as unlocked (unprotected) + */ + for (k = 1; k < flash_info[i].sector_count; k++) + flash_info[i].protect[k] = 0; + } else { + /* + * No legancy unlocking -> unlock all sectors */ flash_protect (FLAG_PROTECT_CLEAR, flash_info[i].start[0], @@ -668,8 +697,12 @@ int flash_real_protect (flash_info_t * info, long sector, int prot) prot ? "protect" : "unprotect")) == 0) { info->protect[sector] = prot; - /* Intel's unprotect unprotects all locking */ - if (prot == 0) { + + /* + * On some of Intel's flash chips (marked via legacy_unlock) + * unprotect unprotects all locking. + */ + if ((prot == 0) && (info->legacy_unlock)) { flash_sect_t i; for (i = 0; i < info->sector_count; i++) { @@ -746,6 +779,10 @@ static int flash_status_check (flash_info_t * info, flash_sect_t sector, { ulong start; +#if CFG_HZ != 1000 + tout *= CFG_HZ/1000; +#endif + /* Wait for command completion */ start = get_timer (0); while (flash_is_busy (info, sector)) { @@ -1082,6 +1119,10 @@ ulong flash_get_size (ulong base, int banknum) uchar num_erase_regions; int erase_region_size; int erase_region_count; +#ifdef CFG_FLASH_PROTECTION + int ext_addr; + info->legacy_unlock = 0; +#endif info->start[0] = base; @@ -1095,6 +1136,13 @@ ulong flash_get_size (ulong base, int banknum) case CFI_CMDSET_INTEL_EXTENDED: default: info->cmd_reset = FLASH_CMD_RESET; +#ifdef CFG_FLASH_PROTECTION + /* read legacy lock/unlock bit from intel flash */ + ext_addr = flash_read_ushort (info, 0, + FLASH_OFFSET_EXT_QUERY_T_P_ADDR); + info->legacy_unlock = + flash_read_uchar (info, ext_addr + 5) & 0x08; +#endif break; case CFI_CMDSET_AMD_STANDARD: case CFI_CMDSET_AMD_EXTENDED: @@ -1160,8 +1208,9 @@ ulong flash_get_size (ulong base, int banknum) info->buffer_size = (1 << flash_read_ushort (info, 0, FLASH_OFFSET_BUFFER_SIZE)); tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_ETOUT); info->erase_blk_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_EMAX_TOUT))); - tmp = 1 << flash_read_uchar (info, FLASH_OFFSET_WBTOUT); - info->buffer_write_tout = (tmp * (1 << flash_read_uchar (info, FLASH_OFFSET_WBMAX_TOUT))); + tmp = (1 << flash_read_uchar (info, FLASH_OFFSET_WBTOUT)) * + (1 << flash_read_uchar (info, FLASH_OFFSET_WBMAX_TOUT)); + info->buffer_write_tout = tmp / 1000 + (tmp % 1000 ? 1 : 0); /* round up when converting to ms */ tmp = (1 << flash_read_uchar (info, FLASH_OFFSET_WTOUT)) * (1 << flash_read_uchar (info, FLASH_OFFSET_WMAX_TOUT)); info->write_tout = tmp / 1000 + (tmp % 1000 ? 1 : 0); /* round up when converting to ms */ diff --git a/drivers/netconsole.c b/drivers/netconsole.c index 9a0a24f..69089f9 100644 --- a/drivers/netconsole.c +++ b/drivers/netconsole.c @@ -29,6 +29,8 @@ #include <devices.h> #include <net.h> +DECLARE_GLOBAL_DATA_PTR; + static char input_buffer[512]; static int input_size = 0; /* char count in input buffer */ static int input_offset = 0; /* offset to valid chars in input buffer */ @@ -105,8 +107,6 @@ int nc_input_packet (uchar * pkt, unsigned dest, unsigned src, unsigned len) static void nc_send_packet (const char *buf, int len) { - DECLARE_GLOBAL_DATA_PTR; - struct eth_device *eth; int inited = 0; uchar *pkt; diff --git a/drivers/ns9750_serial.c b/drivers/ns9750_serial.c index aced3da..8dff367 100644 --- a/drivers/ns9750_serial.c +++ b/drivers/ns9750_serial.c @@ -33,6 +33,8 @@ #include "ns9750_bbus.h" /* for GPIOs */ #include "ns9750_ser.h" /* for serial configuration */ +DECLARE_GLOBAL_DATA_PTR; + #define CONSOLE CONFIG_CONS_INDEX static unsigned int calcBitrateRegister( void ); @@ -183,8 +185,6 @@ void serial_setbrg( void ) static unsigned int calcBitrateRegister( void ) { - DECLARE_GLOBAL_DATA_PTR; - return ( NS9750_SER_BITRATE_EBIT | NS9750_SER_BITRATE_CLKMUX_BCLK | NS9750_SER_BITRATE_TMODE | @@ -204,8 +204,6 @@ static unsigned int calcBitrateRegister( void ) static unsigned int calcRxCharGapRegister( void ) { - DECLARE_GLOBAL_DATA_PTR; - return NS9750_SER_RX_CHAR_TIMER_TRUN; } diff --git a/drivers/ps2ser.c b/drivers/ps2ser.c index e2a38dc..724fa40 100644 --- a/drivers/ps2ser.c +++ b/drivers/ps2ser.c @@ -21,6 +21,8 @@ #include <asm/atomic.h> #include <ps2mult.h> +DECLARE_GLOBAL_DATA_PTR; + /* #define DEBUG */ #define PS2SER_BAUD 57600 @@ -61,8 +63,6 @@ static int ps2buf_out_idx; #ifdef CONFIG_MPC5xxx int ps2ser_init(void) { - DECLARE_GLOBAL_DATA_PTR; - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; unsigned long baseclk; int div; diff --git a/drivers/s3c4510b_uart.c b/drivers/s3c4510b_uart.c index 44b96a9..ddcd591 100644 --- a/drivers/s3c4510b_uart.c +++ b/drivers/s3c4510b_uart.c @@ -50,6 +50,8 @@ #include <asm/hardware.h> #include "s3c4510b_uart.h" +DECLARE_GLOBAL_DATA_PTR; + static UART *uart; /* flush serial input queue. returns 0 on success or negative error @@ -82,8 +84,6 @@ static int serial_flush_output(void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - UART_LINE_CTRL ulctrl; UART_CTRL uctrl; UART_BAUD_DIV ubd; diff --git a/drivers/serial.c b/drivers/serial.c index 057a1ab..228781b 100644 --- a/drivers/serial.c +++ b/drivers/serial.c @@ -30,6 +30,8 @@ #include <ns87308.h> #endif +DECLARE_GLOBAL_DATA_PTR; + #if !defined(CONFIG_CONS_INDEX) #error "No console index specified." #elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4) @@ -77,7 +79,6 @@ static NS16550_t serial_ports[4] = { static int calc_divisor (NS16550_t port) { - DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_OMAP1510 /* If can't cleanly clock 115200 set div to 1 */ if ((CFG_NS16550_CLK == 12000000) && (gd->baudrate == 115200)) { diff --git a/drivers/serial_max3100.c b/drivers/serial_max3100.c index bbe212b..35c5596 100644 --- a/drivers/serial_max3100.c +++ b/drivers/serial_max3100.c @@ -28,6 +28,8 @@ #ifdef CONFIG_MAX3100_SERIAL +DECLARE_GLOBAL_DATA_PTR; + /**************************************************************/ /* convienient macros */ @@ -217,7 +219,6 @@ int serial_init(void) { unsigned int wconf, rconf; int i; - DECLARE_GLOBAL_DATA_PTR; wconf = 0; diff --git a/drivers/tsec.c b/drivers/tsec.c index 4c5e1b5..7ec565c 100644 --- a/drivers/tsec.c +++ b/drivers/tsec.c @@ -23,6 +23,8 @@ #include "tsec.h" #include "miiphy.h" +DECLARE_GLOBAL_DATA_PTR; + #define TX_BUF_CNT 2 static uint rxIdx; /* index of the current RX buffer */ @@ -1082,7 +1084,6 @@ static void relocate_cmds(void) struct phy_cmd **cmdlistptr; struct phy_cmd *cmd; int i,j,k; - DECLARE_GLOBAL_DATA_PTR; for(i=0; phy_info[i]; i++) { /* First thing's first: relocate the pointers to the diff --git a/examples/mem_to_mem_idma2intr.c b/examples/mem_to_mem_idma2intr.c index 3a269c9..3ff2804 100644 --- a/examples/mem_to_mem_idma2intr.c +++ b/examples/mem_to_mem_idma2intr.c @@ -30,6 +30,8 @@ #include <common.h> #include <exports.h> +DECLARE_GLOBAL_DATA_PTR; + #define STANDALONE #ifndef STANDALONE /* Linked into/Part of PPCBoot */ @@ -346,8 +348,6 @@ static uint dpbase = 0; uint dpalloc (uint size, uint align) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immr = (immap_t *) CFG_IMMR; uint retloc; uint align_mask, off; diff --git a/examples/timer.c b/examples/timer.c index 037fdfd..13ec06f 100644 --- a/examples/timer.c +++ b/examples/timer.c @@ -26,6 +26,8 @@ #include <mpc8xx_irq.h> #include <exports.h> +DECLARE_GLOBAL_DATA_PTR; + #undef DEBUG #define TIMER_PERIOD 1000000 /* 1 second clock */ @@ -115,8 +117,6 @@ static char *usage = "\n[q, b, e, ?] "; int timer (int argc, char *argv[]) { - DECLARE_GLOBAL_DATA_PTR; - cpmtimer8xx_t *cpmtimerp; /* Pointer to the CPM Timer structure */ tid_8xx_cpmtimer_t hw; tid_8xx_cpmtimer_t *hwp = &hw; diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h index 83ae5e3..ebda719 100644 --- a/include/asm-arm/arch-pxa/pxa-regs.h +++ b/include/asm-arm/arch-pxa/pxa-regs.h @@ -475,11 +475,11 @@ typedef void (*ExcpHndlr) (void) ; #define ICR_ACKNAK 0x4 /* send ACK(0) or NAK(1) */ #define ICR_TB 0x8 /* transfer byte bit */ #define ICR_MA 0x10 /* master abort */ -#define ICR_SCLE 0x20 /* master clock enable */ +#define ICR_SCLE 0x20 /* master clock enable, mona SCLEA */ #define ICR_IUE 0x40 /* unit enable */ #define ICR_GCD 0x80 /* general call disable */ #define ICR_ITEIE 0x100 /* enable tx interrupts */ -#define ICR_IRFIE 0x200 /* enable rx interrupts */ +#define ICR_IRFIE 0x200 /* enable rx interrupts, mona: DRFIE */ #define ICR_BEIE 0x400 /* enable bus error ints */ #define ICR_SSDIE 0x800 /* slave STOP detected int enable */ #define ICR_ALDIE 0x1000 /* enable arbitration interrupt */ @@ -821,21 +821,21 @@ typedef void (*ExcpHndlr) (void) ; #define RTAR __REG(0x40900004) /* RTC Alarm Register */ #define RTSR __REG(0x40900008) /* RTC Status Register */ #define RTTR __REG(0x4090000C) /* RTC Timer Trim Register */ -#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */ -#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */ -#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */ -#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */ -#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */ -#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */ -#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ -#define RDCR __REG(0x40900010) /* RTC Day Count Register. */ -#define RYCR __REG(0x40900014) /* RTC Year Count Register. */ -#define SWCR __REG(0x40900028) /* Stopwatch Count Register */ -#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */ - -#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */ -#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */ -#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */ +#define RDAR1 __REG(0x40900018) /* Wristwatch Day Alarm Reg 1 */ +#define RDAR2 __REG(0x40900020) /* Wristwatch Day Alarm Reg 2 */ +#define RYAR1 __REG(0x4090001C) /* Wristwatch Year Alarm Reg 1 */ +#define RYAR2 __REG(0x40900024) /* Wristwatch Year Alarm Reg 2 */ +#define SWAR1 __REG(0x4090002C) /* Stopwatch Alarm Register 1 */ +#define SWAR2 __REG(0x40900030) /* Stopwatch Alarm Register 2 */ +#define PIAR __REG(0x40900038) /* Periodic Interrupt Alarm Register */ +#define RDCR __REG(0x40900010) /* RTC Day Count Register. */ +#define RYCR __REG(0x40900014) /* RTC Year Count Register. */ +#define SWCR __REG(0x40900028) /* Stopwatch Count Register */ +#define RTCPICR __REG(0x40900034) /* Periodic Interrupt Counter Register */ + +#define RTSR_PICE (1 << 15) /* Peridoc interrupt count enable */ +#define RTSR_PIALE (1 << 14) /* Peridoc interrupt Alarm enable */ +#define RTSR_PIAL (1 << 13) /* Peridoc interrupt Alarm status */ #define RTSR_HZE (1 << 3) /* HZ interrupt enable */ #define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ #define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ @@ -921,9 +921,10 @@ typedef void (*ExcpHndlr) (void) ; #ifdef CONFIG_CPU_MONAHANS #define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */ -/* Missing: 32 Interrupt priority registers */ -/* mk@tbd: These are the same as beneath for PXA27x: maybe can be - * merged if GPIO Stuff is same too. */ +/* Missing: 32 Interrupt priority registers + * These are the same as beneath for PXA27x: maybe can be merged if + * GPIO Stuff is same too. + */ #define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ #define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ #define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ @@ -983,24 +984,24 @@ typedef void (*ExcpHndlr) (void) ; #define GCDR3 __REG(0x40E0042C) /* Bit-wise Clear of GPDR[127:96] */ #define GSRER0 __REG(0x40E00440) /* Set Rising Edge Det. Enable [31:0] */ -#define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */ +#define GSRER1 __REG(0x40E00444) /* Set Rising Edge Det. Enable [63:32] */ #define GSRER2 __REG(0x40E00448) /* Set Rising Edge Det. Enable [95:64] */ -#define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */ +#define GSRER3 __REG(0x40E0044C) /* Set Rising Edge Det. Enable [127:96] */ #define GCRER0 __REG(0x40E00460) /* Clear Rising Edge Det. Enable [31:0] */ -#define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */ +#define GCRER1 __REG(0x40E00464) /* Clear Rising Edge Det. Enable [63:32] */ #define GCRER2 __REG(0x40E00468) /* Clear Rising Edge Det. Enable [95:64] */ -#define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */ +#define GCRER3 __REG(0x40E0046C) /* Clear Rising Edge Det. Enable[127:96] */ #define GSFER0 __REG(0x40E00480) /* Set Falling Edge Det. Enable [31:0] */ -#define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */ +#define GSFER1 __REG(0x40E00484) /* Set Falling Edge Det. Enable [63:32] */ #define GSFER2 __REG(0x40E00488) /* Set Falling Edge Det. Enable [95:64] */ -#define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */ +#define GSFER3 __REG(0x40E0048C) /* Set Falling Edge Det. Enable[127:96] */ #define GCFER0 __REG(0x40E004A0) /* Clr Falling Edge Det. Enable [31:0] */ -#define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */ +#define GCFER1 __REG(0x40E004A4) /* Clr Falling Edge Det. Enable [63:32] */ #define GCFER2 __REG(0x40E004A8) /* Clr Falling Edge Det. Enable [95:64] */ -#define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */ +#define GCFER3 __REG(0x40E004AC) /* Clr Falling Edge Det. Enable[127:96] */ #define GSDR(x) __REG2(0x40E00400, ((x) & 0x60) >> 3) #define GCDR(x) __REG2(0x40300420, ((x) & 0x60) >> 3) @@ -1488,8 +1489,8 @@ typedef void (*ExcpHndlr) (void) ; #define GPIO79_nCS_3_MD (79 | GPIO_ALT_FN_2_OUT) #define GPIO80_nCS_4_MD (80 | GPIO_ALT_FN_2_OUT) -#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT) -#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT) +#define GPIO117_SCL (117 | GPIO_ALT_FN_1_OUT) +#define GPIO118_SDA (118 | GPIO_ALT_FN_1_OUT) /* * Power Manager @@ -1709,10 +1710,10 @@ typedef void (*ExcpHndlr) (void) ; #define ACCR_13MEND2 (1 << 21) #define ACCR_PCCE (1 << 11) -#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */ -#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */ -#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */ -#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */ +#define CKENA_30_MSL0 (1 << 30) /* MSL0 Interface Unit Clock Enable */ +#define CKENA_29_SSP4 (1 << 29) /* SSP3 Unit Clock Enable */ +#define CKENA_28_SSP3 (1 << 28) /* SSP2 Unit Clock Enable */ +#define CKENA_27_SSP2 (1 << 27) /* SSP1 Unit Clock Enable */ #define CKENA_26_SSP1 (1 << 26) /* SSP0 Unit Clock Enable */ #define CKENA_25_TSI (1 << 25) /* TSI Clock Enable */ #define CKENA_24_AC97 (1 << 24) /* AC97 Unit Clock Enable */ @@ -1720,27 +1721,27 @@ typedef void (*ExcpHndlr) (void) ; #define CKENA_22_FFUART (1 << 22) /* FFUART Unit Clock Enable */ #define CKENA_21_BTUART (1 << 21) /* BTUART Unit Clock Enable */ #define CKENA_20_UDC (1 << 20) /* UDC Clock Enable */ -#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */ -#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */ -#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */ -#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */ -#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */ -#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */ -#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */ -#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */ -#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */ -#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */ -#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */ -#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */ +#define CKENA_19_TPM (1 << 19) /* TPM Unit Clock Enable */ +#define CKENA_18_USIM1 (1 << 18) /* USIM1 Unit Clock Enable */ +#define CKENA_17_USIM0 (1 << 17) /* USIM0 Unit Clock Enable */ +#define CKENA_15_CIR (1 << 15) /* Consumer IR Clock Enable */ +#define CKENA_14_KEY (1 << 14) /* Keypad Controller Clock Enable */ +#define CKENA_13_MMC1 (1 << 13) /* MMC1 Clock Enable */ +#define CKENA_12_MMC0 (1 << 12) /* MMC0 Clock Enable */ +#define CKENA_11_FLASH (1 << 11) /* Boot ROM Clock Enable */ +#define CKENA_10_SRAM (1 << 10) /* SRAM Controller Clock Enable */ +#define CKENA_9_SMC (1 << 9) /* Static Memory Controller */ +#define CKENA_8_DMC (1 << 8) /* Dynamic Memory Controller */ +#define CKENA_7_GRAPHICS (1 << 7) /* 2D Graphics Clock Enable */ #define CKENA_6_USBCLI (1 << 6) /* USB Client Unit Clock Enable */ -#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */ -#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */ +#define CKENA_4_NAND (1 << 4) /* NAND Flash Controller Clock Enable */ +#define CKENA_3_CAMERA (1 << 3) /* Camera Interface Clock Enable */ #define CKENA_2_USBHOST (1 << 2) /* USB Host Unit Clock Enable */ #define CKENA_1_LCD (1 << 1) /* LCD Unit Clock Enable */ #define CKENB_8_1WIRE ((1 << 8) + 32) /* One Wire Interface Unit Clock Enable */ -#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */ -#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */ +#define CKENB_7_GPIO ((1 << 7) + 32) /* GPIO Clock Enable */ +#define CKENB_6_IRQ ((1 << 6) + 32) /* Interrupt Controller Clock Enable */ #define CKENB_4_I2C ((1 << 4) + 32) /* I2C Unit Clock Enable */ #define CKENB_1_PWM1 ((1 << 1) + 32) /* PWM2 & PWM3 Clock Enable */ #define CKENB_0_PWM0 ((1 << 0) + 32) /* PWM0 & PWM1 Clock Enable */ @@ -2382,16 +2383,16 @@ typedef void (*ExcpHndlr) (void) ; #define KPAS_SO (0x1 << 31) #define KPASMKPx_SO (0x1 << 31) -#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */ -#define PSLR __REG(0x40F00034) -#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */ -#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */ -#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */ -#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */ -#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */ -#define OSMR4 __REG(0x40A00080) /* */ -#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ -#define OMCR4 __REG(0x40A000C0) /* */ +#define GPIO113_BIT (1 << 17)/* GPIO113 in GPSR, GPCR, bit 17 */ +#define PSLR __REG(0x40F00034) +#define PSTR __REG(0x40F00038) /* Power Manager Standby Configuration Reg */ +#define PSNR __REG(0x40F0003C) /* Power Manager Sense Configuration Reg */ +#define PVCR __REG(0x40F00040) /* Power Manager Voltage Change Control Reg */ +#define PKWR __REG(0x40F00050) /* Power Manager KB Wake-Up Enable Reg */ +#define PKSR __REG(0x40F00054) /* Power Manager KB Level-Detect Status Reg */ +#define OSMR4 __REG(0x40A00080) /* */ +#define OSCR4 __REG(0x40A00040) /* OS Timer Counter Register */ +#define OMCR4 __REG(0x40A000C0) /* */ #endif /* CONFIG_PXA27X */ diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index e1155e2..16e2cc6 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -139,8 +139,18 @@ #define CFG_I2C_RTC_ADDR 0x68 #define CFG_M41T11_BASE_YEAR 1900 +/* + * SDRAM configuration (please see cpu/ppc/sdram.[ch]) + */ #define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */ +/* SDRAM timings used in datasheet */ +#define CFG_SDRAM_CL 2 +#define CFG_SDRAM_tRP 20 +#define CFG_SDRAM_tRC 65 +#define CFG_SDRAM_tRCD 20 +#undef CFG_SDRAM_tRFC + /* * Miscellaneous configurable options */ diff --git a/include/configs/delta.h b/include/configs/delta.h index b42a7e2..5edea95 100644 --- a/include/configs/delta.h +++ b/include/configs/delta.h @@ -49,7 +49,6 @@ /* * Hardware drivers */ - #undef TURN_ON_ETHERNET #ifdef TURN_ON_ETHERNET # define CONFIG_DRIVER_SMC91111 1 @@ -59,10 +58,18 @@ # undef CONFIG_SMC_USE_IOFUNCS /* just for use with the kernel */ #endif +#define CONFIG_HARD_I2C 1 /* required for DA9030 access */ +#define CFG_I2C_SPEED 400000 /* I2C speed */ +#define CFG_I2C_SLAVE 1 /* I2C controllers address */ +#define DA9030_I2C_ADDR 0x49 /* I2C address of DA9030 */ +#define CFG_DA9030_EXTON_DELAY 100000 /* wait x us after DA9030 reset via EXTON */ +#define CFG_I2C_INIT_BOARD 1 +/* #define CONFIG_HW_WATCHDOG 1 /\* Required for hitting the DA9030 WD *\/ */ + /* * select serial console configuration */ -#define CONFIG_FFUART 1 +#define CONFIG_FFUART 1 /* allow to overwrite serial and ethaddr */ #define CONFIG_ENV_OVERWRITE @@ -73,8 +80,13 @@ #ifdef TURN_ON_ETHERNET # define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PING) #else -# define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_ENV | CFG_CMD_NAND) \ - & ~(CFG_CMD_NET | CFG_CMD_FLASH | CFG_CMD_IMLS)) +# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ + | CFG_CMD_ENV \ + | CFG_CMD_NAND \ + | CFG_CMD_I2C) \ + & ~(CFG_CMD_NET \ + | CFG_CMD_FLASH \ + | CFG_CMD_IMLS)) #endif @@ -114,15 +126,19 @@ #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ #define CFG_DEVICE_NULLDEV 1 -#define CFG_MEMTEST_START 0xa0400000 /* memtest works on */ -#define CFG_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ +#define CFG_MEMTEST_START 0x80400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x80800000 /* 4 ... 8 MB in DRAM */ #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ #define CFG_LOAD_ADDR (CFG_DRAM_BASE + 0x8000) /* default load address */ -#define CFG_HZ 3686400 /* incrementer freq: 3.6864 MHz */ -#define CFG_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */ +#define CFG_HZ 3250000 /* incrementer freq: 3.25 MHz */ + +/* Monahans Core Frequency */ +#define CFG_MONAHANS_RUN_MODE_OSC_RATIO 16 /* valid values: 8, 16, 24, 31 */ +#define CFG_MONAHANS_TURBO_RUN_MODE_RATIO 1 /* valid values: 1, 2 */ + /* valid baudrates */ #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } @@ -144,16 +160,16 @@ * Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 4 /* we have 2 banks of DRAM */ -#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ +#define PHYS_SDRAM_1 0x80000000 /* SDRAM Bank #1 */ #define PHYS_SDRAM_1_SIZE 0x1000000 /* 64 MB */ -#define PHYS_SDRAM_2 0xa1000000 /* SDRAM Bank #2 */ +#define PHYS_SDRAM_2 0x81000000 /* SDRAM Bank #2 */ #define PHYS_SDRAM_2_SIZE 0x1000000 /* 64 MB */ -#define PHYS_SDRAM_3 0xa2000000 /* SDRAM Bank #3 */ +#define PHYS_SDRAM_3 0x82000000 /* SDRAM Bank #3 */ #define PHYS_SDRAM_3_SIZE 0x1000000 /* 64 MB */ -#define PHYS_SDRAM_4 0xa3000000 /* SDRAM Bank #4 */ +#define PHYS_SDRAM_4 0x83000000 /* SDRAM Bank #4 */ #define PHYS_SDRAM_4_SIZE 0x1000000 /* 64 MB */ -#define CFG_DRAM_BASE 0xa0000000 /* at CS0 */ +#define CFG_DRAM_BASE 0x80000000 /* at CS0 */ #define CFG_DRAM_SIZE 0x04000000 /* 64 MB Ram */ #undef CFG_SKIP_DRAM_SCRUB @@ -168,8 +184,6 @@ #define CFG_NAND_BASE_LIST { CFG_NAND0_BASE } #define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ -#define SECTORSIZE 512 -#define NAND_DELAY_US 25 /* mk@tbd: could be 0, I guess */ /* nand timeout values */ #define CFG_NAND_PROG_ERASE_TO 3000 @@ -178,16 +192,15 @@ #undef NAND_ALLOW_ERASE_ALL /* Allow erasing bad blocks - don't use */ /* NAND Timing Parameters (in ns) */ -#define NAND_TIMING_tCH 10 -#define NAND_TIMING_tCS 0 +#define NAND_TIMING_tCH 10 +#define NAND_TIMING_tCS 0 #define NAND_TIMING_tWH 20 -#define NAND_TIMING_tWP 40 +#define NAND_TIMING_tWP 40 -#define NAND_TIMING_tRH 20 -#define NAND_TIMING_tRP 40 +#define NAND_TIMING_tRH 20 +#define NAND_TIMING_tRP 40 -#define NAND_TIMING_tR 11123 -/* #define NAND_TIMING_tWHR 110 */ +#define NAND_TIMING_tR 11123 #define NAND_TIMING_tWHR 100 #define NAND_TIMING_tAR 10 @@ -199,89 +212,19 @@ #define CONFIG_MTD_DEBUG #define CONFIG_MTD_DEBUG_VERBOSE 1 -#define ADDR_COLUMN 1 -#define ADDR_PAGE 2 -#define ADDR_COLUMN_PAGE 3 +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 #define NAND_ChipID_UNKNOWN 0x00 -#define NAND_MAX_FLOORS 1 -#define NAND_MAX_CHIPS 1 - -#define CFG_NO_FLASH 1 -#ifndef CGF_NO_FLASH -/* these are required by the environment code */ -#define PHYS_FLASH_1 CFG_NAND0_BASE /* Flash Bank #1 */ -#define PHYS_FLASH_SIZE 0x04000000 /* 64 MB */ -#define PHYS_FLASH_BANK_SIZE 0x04000000 /* 64 MB Banks */ -#define PHYS_FLASH_SECT_SIZE (SECTORSIZE*1024) /* KB sectors (x2) */ -#endif - -/* - * GPIO settings - */ -#define CFG_GPSR0_VAL 0x00008000 -#define CFG_GPSR1_VAL 0x00FC0382 -#define CFG_GPSR2_VAL 0x0001FFFF -#define CFG_GPCR0_VAL 0x00000000 -#define CFG_GPCR1_VAL 0x00000000 -#define CFG_GPCR2_VAL 0x00000000 -#define CFG_GPDR0_VAL 0x0060A800 -#define CFG_GPDR1_VAL 0x00FF0382 -#define CFG_GPDR2_VAL 0x0001C000 -#define CFG_GAFR0_L_VAL 0x98400000 -#define CFG_GAFR0_U_VAL 0x00002950 -#define CFG_GAFR1_L_VAL 0x000A9558 -#define CFG_GAFR1_U_VAL 0x0005AAAA -#define CFG_GAFR2_L_VAL 0xA0000000 -#define CFG_GAFR2_U_VAL 0x00000002 - -#define CFG_PSSR_VAL 0x20 - -/* - * Memory settings - */ -#define CFG_MSC0_VAL 0x23F223F2 -#define CFG_MSC1_VAL 0x3FF1A441 -#define CFG_MSC2_VAL 0x7FF97FF1 -#define CFG_MDCNFG_VAL 0x00001AC9 -#define CFG_MDREFR_VAL 0x00018018 -#define CFG_MDMRS_VAL 0x00000000 +#define NAND_MAX_FLOORS 1 +#define NAND_MAX_CHIPS 1 -/* - * PCMCIA and CF Interfaces - */ -#define CFG_MECR_VAL 0x00000000 -#define CFG_MCMEM0_VAL 0x00010504 -#define CFG_MCMEM1_VAL 0x00010504 -#define CFG_MCATT0_VAL 0x00010504 -#define CFG_MCATT1_VAL 0x00010504 -#define CFG_MCIO0_VAL 0x00004715 -#define CFG_MCIO1_VAL 0x00004715 - -#define _LED 0x08000010 -#define LED_BLANK 0x08000040 - -/* - * FLASH and environment organization - */ -#ifndef CFG_NO_FLASH -#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */ - -/* timeout values are in ticks */ -#define CFG_FLASH_ERASE_TOUT (25*CFG_HZ) /* Timeout for Flash Erase */ -#define CFG_FLASH_WRITE_TOUT (25*CFG_HZ) /* Timeout for Flash Write */ - - -/* NOTE: many default partitioning schemes assume the kernel starts at the - * second sector, not an environment. You have been warned! - */ -#define CFG_MONITOR_LEN PHYS_FLASH_SECT_SIZE -#endif /* #ifndef CFG_NO_FLASH */ +#define CFG_NO_FLASH 1 -/* #define CFG_ENV_IS_NOWHERE */ #define CFG_ENV_IS_IN_NAND 1 #define CFG_ENV_OFFSET 0x40000 +#define CFG_ENV_OFFSET_REDUND 0x44000 #define CFG_ENV_SIZE 0x4000 #endif /* __CONFIG_H */ diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h index d4dee3b..67c2483 100644 --- a/include/configs/mcc200.h +++ b/include/configs/mcc200.h @@ -67,13 +67,8 @@ #define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ ADD_USB_CMD | \ CFG_CMD_BEDBUG | \ - CFG_CMD_DATE | \ - CFG_CMD_DHCP | \ - CFG_CMD_EEPROM | \ CFG_CMD_FAT | \ - CFG_CMD_I2C | \ - CFG_CMD_NFS | \ - CFG_CMD_SNTP ) + CFG_CMD_I2C) /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ #include <cmd_confdefs.h> @@ -131,26 +126,12 @@ * I2C configuration */ #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ -#define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ +#define CFG_I2C_MODULE 1 /* Select I2C module #1 or #2 */ #define CFG_I2C_SPEED 100000 /* 100 kHz */ #define CFG_I2C_SLAVE 0x7F /* - * EEPROM configuration - */ -#define CFG_I2C_EEPROM_ADDR 0x58 -#define CFG_I2C_EEPROM_ADDR_LEN 1 -#define CFG_EEPROM_PAGE_WRITE_BITS 4 -#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* - * RTC configuration - */ -#define CONFIG_RTC_PCF8563 -#define CFG_I2C_RTC_ADDR 0x51 - -/* * Flash configuration (8,16 or 32 MB) * TEXT base always at 0xFFF00000 * ENV_ADDR always at 0xFFF40000 @@ -231,7 +212,7 @@ */ /* 0x10000004 = 32MB SDRAM */ /* 0x90000004 = 64MB SDRAM */ -#define CFG_GPS_PORT_CONFIG 0x10000004 +#define CFG_GPS_PORT_CONFIG 0x00000004 /* * Miscellaneous configurable options @@ -266,6 +247,11 @@ #define CFG_CS0_START CFG_FLASH_BASE #define CFG_CS0_SIZE CFG_FLASH_SIZE +/* Quad UART @0x80000000 (MBAR is relocated to 0xF0000000) */ +#define CFG_CS2_START 0x80000000 +#define CFG_CS2_SIZE 0x00001000 +#define CFG_CS2_CFG 0x1d800 + #define CFG_CS_BURST 0x00000000 #define CFG_CS_DEADCYCLE 0x33333333 diff --git a/include/configs/p3p440.h b/include/configs/p3p440.h index 831d018..aa0901f 100644 --- a/include/configs/p3p440.h +++ b/include/configs/p3p440.h @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2006 * Stefan Roese, DENX Software Engineering, sr@denx.de. * * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com> @@ -71,9 +71,10 @@ * DDR SDRAM *----------------------------------------------------------------------*/ #define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0*/ -#define CFG_SDRAM_TABLE { \ - {(256 << 20), 0x000C4001}, /* 256MB mode 3, 13x10(4) */ \ - {(64 << 20), 0x00082001}} /* 64MB mode 2, 12x9(4) */ +#define CONFIG_SDRAM_ECC /* enable ECC support */ +#define CFG_SDRAM_TABLE { \ + {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \ + {(64 << 20), 12, 0x00082001}} /* 64MB mode 2, 12x9(4) */ /*----------------------------------------------------------------------- * Serial Port @@ -146,6 +147,7 @@ "cp.b 100000 fffc0000 40000;" \ "setenv filesize;saveenv\0" \ "upd=run load;run update\0" \ + "unlock=yes\0" \ "" #define CONFIG_BOOTCOMMAND "run net_nfs" @@ -275,6 +277,9 @@ #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ #define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION 1 /* use hardware flash protection */ + #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ #define CFG_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ diff --git a/include/crc.h b/include/crc.h new file mode 100644 index 0000000..63399bf --- /dev/null +++ b/include/crc.h @@ -0,0 +1,101 @@ +//========================================================================== +// +// crc.h +// +// Interface for the CRC algorithms. +// +//========================================================================== +//####ECOSGPLCOPYRIGHTBEGIN#### +// ------------------------------------------- +// This file is part of eCos, the Embedded Configurable Operating System. +// Copyright (C) 2002 Andrew Lunn +// +// eCos is free software; you can redistribute it and/or modify it under +// the terms of the GNU General Public License as published by the Free +// Software Foundation; either version 2 or (at your option) any later version. +// +// eCos is distributed in the hope that it will be useful, but WITHOUT ANY +// WARRANTY; without even the implied warranty of MERCHANTABILITY or +// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +// for more details. +// +// You should have received a copy of the GNU General Public License along +// with eCos; if not, write to the Free Software Foundation, Inc., +// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. +// +// As a special exception, if other files instantiate templates or use macros +// or inline functions from this file, or you compile this file and link it +// with other works to produce a work based on this file, this file does not +// by itself cause the resulting work to be covered by the GNU General Public +// License. However the source code for this file must still be made available +// in accordance with section (3) of the GNU General Public License. +// +// This exception does not invalidate any other reasons why a work based on +// this file might be covered by the GNU General Public License. +// +// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. +// at http://sources.redhat.com/ecos/ecos-license/ +// ------------------------------------------- +//####ECOSGPLCOPYRIGHTEND#### +//========================================================================== +//#####DESCRIPTIONBEGIN#### +// +// Author(s): Andrew Lunn +// Contributors: Andrew Lunn +// Date: 2002-08-06 +// Purpose: +// Description: +// +// This code is part of eCos (tm). +// +//####DESCRIPTIONEND#### +// +//========================================================================== + +#ifndef _SERVICES_CRC_CRC_H_ +#define _SERVICES_CRC_CRC_H_ + +#include <linux/types.h> + +#ifndef __externC +# ifdef __cplusplus +# define __externC extern "C" +# else +# define __externC extern +# endif +#endif + +// Compute a CRC, using the POSIX 1003 definition +extern uint32_t +cyg_posix_crc32(unsigned char *s, int len); + +// Gary S. Brown's 32 bit CRC + +extern uint32_t +cyg_crc32(unsigned char *s, int len); + +// Gary S. Brown's 32 bit CRC, but accumulate the result from a +// previous CRC calculation + +extern uint32_t +cyg_crc32_accumulate(uint32_t crc, unsigned char *s, int len); + +// Ethernet FCS Algorithm + +extern uint32_t +cyg_ether_crc32(unsigned char *s, int len); + +// Ethernet FCS algorithm, but accumulate the result from a previous +// CRC calculation. + +extern uint32_t +cyg_ether_crc32_accumulate(uint32_t crc, unsigned char *s, int len); + +// 16 bit CRC with polynomial x^16+x^12+x^5+1 + +extern uint16_t cyg_crc16(unsigned char *s, int len); + +#endif // _SERVICES_CRC_CRC_H_ + + + diff --git a/include/da9030.h b/include/da9030.h new file mode 100644 index 0000000..41108b9 --- /dev/null +++ b/include/da9030.h @@ -0,0 +1,106 @@ +/* + * (C) Copyright 2006 DENX Software Engineering + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* DA9030 register definitions */ +#define CID 0x00 +#define EVENT_A 0x01 +#define EVENT_B 0x02 +#define EVENT_C 0x03 +#define STATUS 0x04 +#define IRQ_MASK_A 0x05 +#define IRQ_MASK_B 0x06 +#define IRQ_MASK_C 0x07 +#define SYS_CONTROL_A 0x08 +#define SYS_CONTROL_B 0x09 +#define FAULT_LOG 0x0A +#define LDO_10_11 0x10 +#define LDO_15 0x11 +#define LDO_14_16 0x12 +#define LDO_18_19 0x13 +#define LDO_17_SIMCP0 0x14 +#define BUCK2_DVC1 0x15 +#define BUCK2_DVC2 0x16 +#define REG_CONTROL_1_17 0x17 +#define REG_CONTROL_2_18 0x18 +#define USBPUMP 0x19 +#define SLEEP_CONTROL 0x1A +#define STARTUP_CONTROL 0x1B +#define LED1_CONTROL 0x20 +#define LED2_CONTROL 0x21 +#define LED3_CONTROL 0x22 +#define LED4_CONTROL 0x23 +#define LEDPC_CONTROL 0x24 +#define WLED_CONTROL 0x25 +#define MISC_CONTROLA 0x26 +#define MISC_CONTROLB 0x27 +#define CHARGE_CONTROL 0x28 +#define CCTR_CONTROL 0x29 +#define TCTR_CONTROL 0x2A +#define CHARGE_PULSE 0x2B + +/* ... some missing ...*/ + +#define LDO1 0x90 +#define LDO2_3 0x91 +#define LDO4_5 0x92 +#define LDO6_SIMCP 0x93 +#define LDO7_8 0x94 +#define LDO9_12 0x95 +#define BUCK 0x96 +#define REG_CONTROL_1_97 0x97 +#define REG_CONTROL_2_98 0x98 +#define REG_SLEEP_CONTROL1 0x99 +#define REG_SLEEP_CONTROL2 0x9A +#define REG_SLEEP_CONTROL3 0x9B +#define ADC_MAN_CONTROL 0xA0 +#define ADC_AUTO_CONTROL 0xA1 +#define VBATMON 0xA2 +#define VBATMONTXMON 0xA3 +#define TBATHIGHP 0xA4 +#define TBATHIGHN 0xA5 +#define TBATLOW 0xA6 +#define MAN_RES 0xB0 +#define VBAT_RES 0xB1 +#define VBATMIN_RES 0xB2 +#define VBATMINTXON_RES 0xB3 +#define ICHMAX_RES 0xB4 +#define ICHMIN_RES 0xB5 +#define ICHAVERAGE_RES 0xB6 +#define VCHMAX_RES 0xB7 +#define VCHMIN_RES 0xB8 +#define TBAT_RES 0xB9 +#define ADC_IN4_RES 0xBA + +#define STATUS_ONKEY_N 0x1 /* current ONKEY_N value */ +#define STATUS_PWREN1 (1<<1) /* PWREN1 value */ +#define STATUS_EXTON (1<<2) /* EXTON value */ +#define STATUS_CHDET (1<<3) /* Charger detection status */ +#define STATUS_TBAT (1<<4) /* Battery over/under temperature status */ +#define STATUS_VBATMON (1<<5) /* VBATMON comparison status */ +#define STATUS_VBATMONTXON (1<<6) /* VBATMONTXON comparison status */ +#define STATUS_CHIOVER (1<<7) /* Charge overcurrent */ + +#define SYS_CONTROL_A_SLEEP_N_PIN_ENABLE 0x1 +#define SYS_CONTROL_A_SHUT_DOWN (1<<1) +#define SYS_CONTROL_A_HWRES_ENABLE (1<<2) +#define SYS_CONTROL_A_WDOG_ACTION (1<<3) +#define SYS_CONTROL_A_WATCHDOG (1<<7) diff --git a/include/environment.h b/include/environment.h index bb10964..422f800 100644 --- a/include/environment.h +++ b/include/environment.h @@ -69,6 +69,18 @@ # endif #endif /* CFG_ENV_IS_IN_FLASH */ +#if defined(CFG_ENV_IS_IN_NAND) +# ifndef CFG_ENV_OFFSET +# error "Need to define CFG_ENV_OFFSET when using CFG_ENV_IS_IN_NAND" +# endif +# ifndef CFG_ENV_SIZE +# error "Need to define CFG_ENV_SIZE when using CFG_ENV_IS_IN_NAND" +# endif +# ifdef CFG_ENV_OFFSET_REDUND +# define CFG_REDUNDAND_ENVIRONMENT +# endif +#endif /* CFG_ENV_IS_IN_NAND */ + #ifdef CFG_REDUNDAND_ENVIRONMENT # define ENV_HEADER_SIZE (sizeof(unsigned long) + 1) diff --git a/include/flash.h b/include/flash.h index 4c68c68..a84dc68 100644 --- a/include/flash.h +++ b/include/flash.h @@ -45,6 +45,7 @@ typedef struct { ushort vendor; /* the primary vendor id */ ushort cmd_reset; /* Vendor specific reset command */ ushort interface; /* used for x8/x16 adjustments */ + ushort legacy_unlock; /* support Intel legacy (un)locking */ #endif } flash_info_t; diff --git a/include/xyzModem.h b/include/xyzModem.h new file mode 100644 index 0000000..a62a174 --- /dev/null +++ b/include/xyzModem.h @@ -0,0 +1,112 @@ +//========================================================================== +// +// xyzModem.h +// +// RedBoot stream handler for xyzModem protocol +// +//========================================================================== +//####ECOSGPLCOPYRIGHTBEGIN#### +// ------------------------------------------- +// This file is part of eCos, the Embedded Configurable Operating System. +// Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc. +// Copyright (C) 2002 Gary Thomas +// +// eCos is free software; you can redistribute it and/or modify it under +// the terms of the GNU General Public License as published by the Free +// Software Foundation; either version 2 or (at your option) any later version. +// +// eCos is distributed in the hope that it will be useful, but WITHOUT ANY +// WARRANTY; without even the implied warranty of MERCHANTABILITY or +// FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License +// for more details. +// +// You should have received a copy of the GNU General Public License along +// with eCos; if not, write to the Free Software Foundation, Inc., +// 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA. +// +// As a special exception, if other files instantiate templates or use macros +// or inline functions from this file, or you compile this file and link it +// with other works to produce a work based on this file, this file does not +// by itself cause the resulting work to be covered by the GNU General Public +// License. However the source code for this file must still be made available +// in accordance with section (3) of the GNU General Public License. +// +// This exception does not invalidate any other reasons why a work based on +// this file might be covered by the GNU General Public License. +// +// Alternative licenses for eCos may be arranged by contacting Red Hat, Inc. +// at http://sources.redhat.com/ecos/ecos-license/ +// ------------------------------------------- +//####ECOSGPLCOPYRIGHTEND#### +//========================================================================== +//#####DESCRIPTIONBEGIN#### +// +// Author(s): gthomas +// Contributors: gthomas +// Date: 2000-07-14 +// Purpose: +// Description: +// +// This code is part of RedBoot (tm). +// +//####DESCRIPTIONEND#### +// +//========================================================================== + +#ifndef _XYZMODEM_H_ +#define _XYZMODEM_H_ + +#define xyzModem_xmodem 1 +#define xyzModem_ymodem 2 +// Don't define this until the protocol support is in place +//#define xyzModem_zmodem 3 + +#define xyzModem_access -1 +#define xyzModem_noZmodem -2 +#define xyzModem_timeout -3 +#define xyzModem_eof -4 +#define xyzModem_cancel -5 +#define xyzModem_frame -6 +#define xyzModem_cksum -7 +#define xyzModem_sequence -8 + +#define xyzModem_close 1 +#define xyzModem_abort 2 + + +#ifdef REDBOOT +extern getc_io_funcs_t xyzModem_io; +#else +#define CYGNUM_CALL_IF_SET_COMM_ID_QUERY_CURRENT +#define CYGACC_CALL_IF_SET_CONSOLE_COMM(x) + +#define diag_vprintf vprintf +#define diag_printf printf +#define diag_vsprintf vsprintf + +#define CYGACC_CALL_IF_DELAY_US(x) udelay(x) + +typedef struct { + char *filename; + int mode; + int chan; +#ifdef CYGPKG_REDBOOT_NETWORKING + struct sockaddr_in *server; +#endif +} connection_info_t; + +typedef unsigned int bool; + +#define false 0 +#define true 1 + +#endif + + +int xyzModem_stream_open(connection_info_t *info, int *err); +void xyzModem_stream_close(int *err); +void xyzModem_stream_terminate(bool method, int (*getc)(void)); +int xyzModem_stream_read(char *buf, int size, int *err); +char *xyzModem_error(int err); + +#endif // _XYZMODEM_H_ diff --git a/lib_arm/armlinux.c b/lib_arm/armlinux.c index dba2ff7..56b7fca 100644 --- a/lib_arm/armlinux.c +++ b/lib_arm/armlinux.c @@ -30,6 +30,8 @@ #include <dataflash.h> #endif +DECLARE_GLOBAL_DATA_PTR; + /*cmd_boot.c*/ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); @@ -77,8 +79,6 @@ extern image_header_t header; /* from cmd_bootm.c */ void do_bootm_linux (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[], ulong addr, ulong *len_ptr, int verify) { - DECLARE_GLOBAL_DATA_PTR; - ulong len = 0, checksum; ulong initrd_start, initrd_end; ulong data; diff --git a/lib_blackfin/board.c b/lib_blackfin/board.c index 55d13fa..d9dc2b6 100644 --- a/lib_blackfin/board.c +++ b/lib_blackfin/board.c @@ -35,6 +35,8 @@ #include "blackfin_board.h" #include "../drivers/smc91111.h" +DECLARE_GLOBAL_DATA_PTR; + extern flash_info_t flash_info[]; @@ -76,8 +78,6 @@ static void display_flash_config(ulong size) static int init_baudrate(void) { - DECLARE_GLOBAL_DATA_PTR; - uchar tmp[64]; int i = getenv_r("baudrate", tmp, sizeof(tmp)); gd->bd->bi_baudrate = gd->baudrate = (i > 0) @@ -89,7 +89,6 @@ static int init_baudrate(void) #ifdef DEBUG static void display_global_data(void) { - DECLARE_GLOBAL_DATA_PTR; bd_t *bd; bd = gd->bd; printf("--flags:%x\n", gd->flags); @@ -136,7 +135,6 @@ static void display_global_data(void) void board_init_f(ulong bootflag) { - DECLARE_GLOBAL_DATA_PTR; ulong addr; bd_t *bd; @@ -173,7 +171,6 @@ void board_init_f(ulong bootflag) void board_init_r(gd_t * id, ulong dest_addr) { - DECLARE_GLOBAL_DATA_PTR; ulong size; extern void malloc_bin_reloc(void); char *s, *e; diff --git a/lib_i386/bios_setup.c b/lib_i386/bios_setup.c index bc97815..75f04a0 100644 --- a/lib_i386/bios_setup.c +++ b/lib_i386/bios_setup.c @@ -36,6 +36,8 @@ #include <asm/realmode.h> #include <asm/io.h> +DECLARE_GLOBAL_DATA_PTR; + #define NUMVECTS 256 #define BIOS_DATA ((char*)0x400) @@ -136,7 +138,6 @@ static void setvector(int vector, u16 segment, void *handler) int bios_setup(void) { - DECLARE_GLOBAL_DATA_PTR; static int done=0; int vector; struct pci_controller *pri_hose; diff --git a/lib_i386/board.c b/lib_i386/board.c index e90eb6e..4175fdb 100644 --- a/lib_i386/board.c +++ b/lib_i386/board.c @@ -38,6 +38,8 @@ #include <ide.h> #include <asm/u-boot-i386.h> +DECLARE_GLOBAL_DATA_PTR; + extern long _i386boot_start; extern long _i386boot_end; extern long _i386boot_romdata_start; @@ -80,8 +82,6 @@ static ulong mem_malloc_brk = 0; static int mem_malloc_init(void) { - DECLARE_GLOBAL_DATA_PTR; - /* start malloc area right after the stack */ mem_malloc_start = i386boot_bss_start + i386boot_bss_size + CFG_STACK_SIZE; @@ -130,8 +130,6 @@ char *strmhz (char *buf, long hz) */ static int init_baudrate (void) { - DECLARE_GLOBAL_DATA_PTR; - char tmp[64]; /* long enough for environment variables */ int i = getenv_r("baudrate", tmp, 64); @@ -167,7 +165,6 @@ static int display_banner (void) */ static int display_dram_config (void) { - DECLARE_GLOBAL_DATA_PTR; int i; puts ("DRAM Configuration:\n"); @@ -233,7 +230,6 @@ gd_t *global_data; void start_i386boot (void) { - DECLARE_GLOBAL_DATA_PTR; char *s; int i; ulong size; diff --git a/lib_m68k/board.c b/lib_m68k/board.c index 6b3edd6..e25833b 100644 --- a/lib_m68k/board.c +++ b/lib_m68k/board.c @@ -60,6 +60,8 @@ #include <i2c.h> #endif +DECLARE_GLOBAL_DATA_PTR; + static char *failed = "*** failed ***\n"; #ifdef CONFIG_PCU_E @@ -111,8 +113,6 @@ static ulong mem_malloc_brk = 0; */ static void mem_malloc_init (void) { - DECLARE_GLOBAL_DATA_PTR; - ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off; mem_malloc_end = dest_addr; @@ -177,8 +177,6 @@ typedef int (init_fnc_t) (void); static int init_baudrate (void) { - DECLARE_GLOBAL_DATA_PTR; - uchar tmp[64]; /* long enough for environment variables */ int i = getenv_r ("baudrate", tmp, sizeof (tmp)); @@ -192,8 +190,6 @@ static int init_baudrate (void) static int init_func_ram (void) { - DECLARE_GLOBAL_DATA_PTR; - int board_type = 0; /* use dummy arg */ puts ("DRAM: "); @@ -263,8 +259,6 @@ init_fnc_t *init_sequence[] = { void board_init_f (ulong bootflag) { - DECLARE_GLOBAL_DATA_PTR; - bd_t *bd; ulong len, addr, addr_sp; gd_t *id; @@ -414,7 +408,6 @@ board_init_f (ulong bootflag) */ void board_init_r (gd_t *id, ulong dest_addr) { - DECLARE_GLOBAL_DATA_PTR; cmd_tbl_t *cmdtp; char *s, *e; bd_t *bd; diff --git a/lib_m68k/m68k_linux.c b/lib_m68k/m68k_linux.c index a32de1a..f87f56e 100644 --- a/lib_m68k/m68k_linux.c +++ b/lib_m68k/m68k_linux.c @@ -27,6 +27,8 @@ #include <zlib.h> #include <asm/byteorder.h> +DECLARE_GLOBAL_DATA_PTR; + #define PHYSADDR(x) x #define LINUX_MAX_ENVS 256 @@ -56,8 +58,6 @@ static void linux_env_set (char *env_name, char *env_val); void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], ulong addr, ulong * len_ptr, int verify) { - DECLARE_GLOBAL_DATA_PTR; - ulong len = 0, checksum; ulong initrd_start, initrd_end; ulong data; diff --git a/lib_microblaze/board.c b/lib_microblaze/board.c index bc987a3..026d247 100644 --- a/lib_microblaze/board.c +++ b/lib_microblaze/board.c @@ -28,6 +28,8 @@ #include <version.h> #include <watchdog.h> +DECLARE_GLOBAL_DATA_PTR; + const char version_string[] = U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")"; @@ -72,8 +74,6 @@ init_fnc_t *init_sequence[] = { void board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - bd_t *bd; init_fnc_t **init_fnc_ptr; diff --git a/lib_mips/mips_linux.c b/lib_mips/mips_linux.c index 12e8435..952d5a9 100644 --- a/lib_mips/mips_linux.c +++ b/lib_mips/mips_linux.c @@ -28,6 +28,8 @@ #include <asm/byteorder.h> #include <asm/addrspace.h> +DECLARE_GLOBAL_DATA_PTR; + #define LINUX_MAX_ENVS 256 #define LINUX_MAX_ARGS 256 @@ -56,8 +58,6 @@ static void linux_env_set (char * env_name, char * env_val); void do_bootm_linux (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[], ulong addr, ulong * len_ptr, int verify) { - DECLARE_GLOBAL_DATA_PTR; - ulong len = 0, checksum; ulong initrd_start, initrd_end; ulong data; diff --git a/lib_nios/board.c b/lib_nios/board.c index e6cda52..0a0d2e3 100644 --- a/lib_nios/board.c +++ b/lib_nios/board.c @@ -32,6 +32,7 @@ #include <status_led.h> #endif +DECLARE_GLOBAL_DATA_PTR; /* * All attempts to come up with a "common" initialization sequence @@ -106,8 +107,6 @@ init_fnc_t *init_sequence[] = { /***********************************************************************/ void board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - bd_t *bd; init_fnc_t **init_fnc_ptr; char *s, *e; diff --git a/lib_nios2/board.c b/lib_nios2/board.c index 0e0b042..cd23037 100644 --- a/lib_nios2/board.c +++ b/lib_nios2/board.c @@ -32,6 +32,7 @@ #include <status_led.h> #endif +DECLARE_GLOBAL_DATA_PTR; /* * All attempts to come up with a "common" initialization sequence @@ -106,8 +107,6 @@ init_fnc_t *init_sequence[] = { /***********************************************************************/ void board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - bd_t *bd; init_fnc_t **init_fnc_ptr; char *s, *e; diff --git a/lib_ppc/board.c b/lib_ppc/board.c index e569e97..e68cf1f 100644 --- a/lib_ppc/board.c +++ b/lib_ppc/board.c @@ -90,6 +90,7 @@ extern flash_info_t flash_info[]; #endif #include <environment.h> + DECLARE_GLOBAL_DATA_PTR; #if defined(CFG_ENV_IS_EMBEDDED) @@ -92,6 +92,8 @@ #if (CONFIG_COMMANDS & CFG_CMD_NET) +DECLARE_GLOBAL_DATA_PTR; + #define ARP_TIMEOUT 5 /* Seconds before trying ARP again */ #ifndef CONFIG_NET_RETRY_COUNT # define ARP_TIMEOUT_COUNT 5 /* # of timeouts before giving up */ @@ -266,8 +268,6 @@ void ArpTimeoutCheck(void) int NetLoop(proto_t protocol) { - DECLARE_GLOBAL_DATA_PTR; - bd_t *bd = gd->bd; #ifdef CONFIG_NET_MULTI @@ -572,9 +572,6 @@ startAgainHandler(uchar * pkt, unsigned dest, unsigned src, unsigned len) void NetStartAgain (void) { -#ifdef CONFIG_NET_MULTI - DECLARE_GLOBAL_DATA_PTR; -#endif char *nretry; int noretry = 0, once = 0; diff --git a/post/ether.c b/post/ether.c index 660620e..8c87b59 100644 --- a/post/ether.c +++ b/post/ether.c @@ -51,6 +51,8 @@ #include <net.h> #include <serial.h> +DECLARE_GLOBAL_DATA_PTR; + #define MIN_PACKET_LENGTH 64 #define MAX_PACKET_LENGTH 256 #define TEST_NUM 1 @@ -109,7 +111,6 @@ static RTXBD *rtx; static void scc_init (int scc_index) { - DECLARE_GLOBAL_DATA_PTR; bd_t *bd = gd->bd; static int proff[] = diff --git a/post/memory.c b/post/memory.c index a10bc50..a2c088b 100644 --- a/post/memory.c +++ b/post/memory.c @@ -157,6 +157,8 @@ #if CONFIG_POST & CFG_POST_MEMORY +DECLARE_GLOBAL_DATA_PTR; + /* * Define INJECT_*_ERRORS for testing error detection in the presence of * _good_ hardware. @@ -455,7 +457,6 @@ static int memory_post_tests (unsigned long start, unsigned long size) int memory_post_test (int flags) { int ret = 0; - DECLARE_GLOBAL_DATA_PTR; bd_t *bd = gd->bd; unsigned long memsize = (bd->bi_memsize >= 256 << 20 ? 256 << 20 : bd->bi_memsize) - (1 << 20); diff --git a/post/post.c b/post/post.c index b3df91a..e1066da 100644 --- a/post/post.c +++ b/post/post.c @@ -32,14 +32,14 @@ #ifdef CONFIG_POST +DECLARE_GLOBAL_DATA_PTR; + #define POST_MAX_NUMBER 32 #define BOOTMODE_MAGIC 0xDEAD0000 int post_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; - int res = 0; unsigned int i; @@ -62,7 +62,6 @@ int post_init_f (void) void post_bootmode_init (void) { - DECLARE_GLOBAL_DATA_PTR; int bootmode = post_bootmode_get (0); int newword; @@ -110,20 +109,17 @@ int post_bootmode_get (unsigned int *last_test) /* POST tests run before relocation only mark status bits .... */ static void post_log_mark_start ( unsigned long testid ) { - DECLARE_GLOBAL_DATA_PTR; gd->post_log_word |= (testid)<<16; } static void post_log_mark_succ ( unsigned long testid ) { - DECLARE_GLOBAL_DATA_PTR; gd->post_log_word |= testid; } /* ... and the messages are output once we are relocated */ void post_output_backlog ( void ) { - DECLARE_GLOBAL_DATA_PTR; int j; for (j = 0; j < post_list_size; j++) { @@ -379,8 +375,6 @@ int post_log (char *format, ...) void post_reloc (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned int i; /* diff --git a/post/sysmon.c b/post/sysmon.c index 72fcac3..f61d598 100644 --- a/post/sysmon.c +++ b/post/sysmon.c @@ -52,6 +52,8 @@ #if CONFIG_POST & CFG_POST_SYSMON +DECLARE_GLOBAL_DATA_PTR; + static int sysmon_temp_invalid = 0; /* #define DEBUG */ @@ -159,8 +161,6 @@ int sysmon_init_f (void) void sysmon_reloc (void) { - DECLARE_GLOBAL_DATA_PTR; - sysmon_t ** l; sysmon_table_t * t; @@ -281,8 +281,6 @@ static void sysmon_ccfl_enable (sysmon_table_t * this) int sysmon_post_test (int flags) { - DECLARE_GLOBAL_DATA_PTR; - int res = 0; sysmon_table_t * t; uint val; diff --git a/post/uart.c b/post/uart.c index 23bf036..fd97e38 100644 --- a/post/uart.c +++ b/post/uart.c @@ -50,6 +50,8 @@ #include <command.h> #include <serial.h> +DECLARE_GLOBAL_DATA_PTR; + #define CTLR_SMC 0 #define CTLR_SCC 1 @@ -82,8 +84,6 @@ static int proff_scc[] = static void smc_init (int smc_index) { - DECLARE_GLOBAL_DATA_PTR; - static int cpm_cr_ch[] = { CPM_CR_CH_SMC1, CPM_CR_CH_SMC2 }; volatile immap_t *im = (immap_t *) CFG_IMMR; @@ -288,8 +288,6 @@ static int smc_getc (int smc_index) static void scc_init (int scc_index) { - DECLARE_GLOBAL_DATA_PTR; - static int cpm_cr_ch[] = { CPM_CR_CH_SCC1, CPM_CR_CH_SCC2, |