diff options
| -rw-r--r-- | Makefile | 8 | ||||
| -rw-r--r-- | board/freescale/mx6sl_evk/Makefile | 47 | ||||
| -rw-r--r-- | board/freescale/mx6sl_evk/config.mk | 7 | ||||
| -rw-r--r-- | board/freescale/mx6sl_evk/flash_header.S | 704 | ||||
| -rw-r--r-- | board/freescale/mx6sl_evk/lowlevel_init.S | 139 | ||||
| -rw-r--r-- | board/freescale/mx6sl_evk/mx6sl_evk.c | 1095 | ||||
| -rw-r--r-- | board/freescale/mx6sl_evk/u-boot.lds | 82 | ||||
| -rw-r--r-- | include/asm-arm/mach-types.h | 13 | ||||
| -rw-r--r-- | include/configs/mx6sl_evk.h | 317 | ||||
| -rw-r--r-- | include/configs/mx6sl_evk_iram.h | 155 |
10 files changed, 2567 insertions, 0 deletions
@@ -3355,6 +3355,14 @@ mx6sl_arm2_iram_config : unconfig echo "... with iram configuration" ; \ } @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx6sl_arm2 freescale mx6 +mx6sl_evk_config \ +mx6sl_evk_mfg_config \ +mx6sl_evk_iram_config : unconfig + @[ -z "$(findstring iram_,$@)" ] || \ + { echo "TEXT_BASE = 0x00907000" >$(obj)board/freescale/mx6sl_evk/config.tmp ; \ + echo "... with iram configuration" ; \ + } + @$(MKCONFIG) $(@:_config=) arm arm_cortexa8 mx6sl_evk freescale mx6 omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx diff --git a/board/freescale/mx6sl_evk/Makefile b/board/freescale/mx6sl_evk/Makefile new file mode 100644 index 0000000..c0b30e4 --- /dev/null +++ b/board/freescale/mx6sl_evk/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2010-2011 Freescale Semiconductor, Inc. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o +SOBJS := lowlevel_init.o flash_header.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/freescale/mx6sl_evk/config.mk b/board/freescale/mx6sl_evk/config.mk new file mode 100644 index 0000000..8a50fb2 --- /dev/null +++ b/board/freescale/mx6sl_evk/config.mk @@ -0,0 +1,7 @@ +LDSCRIPT := $(SRCTREE)/board/$(VENDOR)/$(BOARD)/u-boot.lds + +sinclude $(OBJTREE)/board/$(VENDOR)/$(BOARD)/config.tmp + +ifndef TEXT_BASE + TEXT_BASE = 0x87800000 +endif diff --git a/board/freescale/mx6sl_evk/flash_header.S b/board/freescale/mx6sl_evk/flash_header.S new file mode 100644 index 0000000..4c2475e --- /dev/null +++ b/board/freescale/mx6sl_evk/flash_header.S @@ -0,0 +1,704 @@ +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/mx6.h> + +#ifdef CONFIG_FLASH_HEADER +#ifndef CONFIG_FLASH_HEADER_OFFSET +# error "Must define the offset of flash header" +#endif + +#ifndef CONFIG_FLASH_PLUG_IN + +/********************DCD mode***********************/ +#define CPU_2_BE_32(l) \ + ((((l) & 0x000000FF) << 24) | \ + (((l) & 0x0000FF00) << 8) | \ + (((l) & 0x00FF0000) >> 8) | \ + (((l) & 0xFF000000) >> 24)) + +#define MXC_DCD_ITEM(i, addr, val) \ +dcd_node_##i: \ + .word CPU_2_BE_32(addr) ; \ + .word CPU_2_BE_32(val) ; \ + +.section ".text.flasheader", "x" + b _start + .org CONFIG_FLASH_HEADER_OFFSET + +ivt_header: .word 0x402000D1 /* Tag=0xD1, Len=0x0020, Ver=0x40 */ +app_code_jump_v: .word _start +reserv1: .word 0x0 +dcd_ptr: .word dcd_hdr +boot_data_ptr: .word boot_data +self_ptr: .word ivt_header +#ifdef CONFIG_SECURE_BOOT +app_code_csf: .word __hab_data +#else +app_code_csf: .word 0x0 +#endif +reserv2: .word 0x0 + +boot_data: .word TEXT_BASE +#ifdef CONFIG_SECURE_BOOT +image_len: .word __hab_data_end - TEXT_BASE + CONFIG_FLASH_HEADER_OFFSET +#else +image_len: .word _end_of_copy - TEXT_BASE + CONFIG_FLASH_HEADER_OFFSET +#endif +plugin: .word 0x0 + +/* !!!! Need update Len field after adding ddr script !!!!!!!!!!!!!!!!!*/ +dcd_hdr: .word 0x404802D2 /* Tag=0xD2, Len=72*8 + 4 + 4, Ver=0x40 */ +write_dcd_cmd: .word 0x044402CC /* Tag=0xCC, Len=72*8 + 4, Param=0x04 */ + +/*###################put the ddr script here ######################*/ +/*========================================================================*/ +/*init script for i.MX6SL LPDDR2*/ +/*========================================================================*/ +/* Revision History*/ +/* v0.1 : Init pre-silicon version for Samsung K4P8G304EB-AGC1 on CPU LPDDR2 + board. It's currently soldered, not PoPed.*/ +/* v0.2 : CCM, IO, LPDDR_2ch config fixed*/ + +/* If someone is playing this init on different DDR device, or on PoPed board, + please feedback me with result.*/ +/* boaz.perlman@freescale.com*/ + +/* v0.9 : RALAT 5->3 (improved operation at low freq). CK_FT0_DCC=CK_FT1_DCC=1 + (Improved SDCLK signal shape)*/ +/* v0.91 : IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCKE0/1 programming is removed, as this + got no effect on SDCKE drive strength, pull activiticy.*/ +/* v0.93 : DRAM_RESET/DDR_SEL=00, as a workaround to SDCLK cross point and + duty cycle offsets.*/ +/*========================================================================*/ + +/*wait = on*/ +/*========================================================================*/ +/* Disable WDOG*/ +/*========================================================================*/ +/*setmem /16 0x020bc000 = 0x30*/ + +/*========================================================================*/ +/* Enable all clocks (they are disabled by ROM code)*/ +/*========================================================================*/ +/*setmem /32 0x020c4068 = 0xffffffff*/ +/*setmem /32 0x020c406c = 0xffffffff*/ +/*setmem /32 0x020c4070 = 0xffffffff*/ +/*setmem /32 0x020c4074 = 0xffffffff*/ +/*setmem /32 0x020c4078 = 0xffffffff*/ +/*setmem /32 0x020c407c = 0xffffffff*/ +/*setmem /32 0x020c4080 = 0xffffffff*/ +/*setmem /32 0x020c4084 = 0xffffffff*/ + +/*DDR clk to 400MHz*/ +/*CCM_BASE_ADDR = 0x020c4000*/ +MXC_DCD_ITEM(1, CCM_BASE_ADDR + 0x018, 0x00260324) + +/*========================================================================*/ +/* IOMUX*/ +/*========================================================================*/ +/* Megrez note: IOMUX configs specify absolute addr in Arik IOMUXC. Changes to + Megrez addr.*/ +/* Megrez note: Good chance that drive strength change is required. to change + them all by editing the LSB value "38"-> ""30" or "28"*/ +/* Megrez note: Timing also can be tweaked by drive strength values. It is + mainly by giving SDCLk and SDQS different values than the sampled signals*/ + +/*IOMUXC_BASE_ADDR = 0x020e0000*/ +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0*/ +MXC_DCD_ITEM(2, IOMUXC_BASE_ADDR + 0x344, 0x00003030) +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1*/ +MXC_DCD_ITEM(3, IOMUXC_BASE_ADDR + 0x348, 0x00003030) +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2*/ +MXC_DCD_ITEM(4, IOMUXC_BASE_ADDR + 0x34c, 0x00003030) +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3*/ +MXC_DCD_ITEM(5, IOMUXC_BASE_ADDR + 0x350, 0x00003030) + +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM0*/ +MXC_DCD_ITEM(6, IOMUXC_BASE_ADDR + 0x30c, 0x00000030) +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM1*/ +MXC_DCD_ITEM(7, IOMUXC_BASE_ADDR + 0x310, 0x00000030) +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM2*/ +MXC_DCD_ITEM(8, IOMUXC_BASE_ADDR + 0x314, 0x00000030) +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM3*/ +MXC_DCD_ITEM(9, IOMUXC_BASE_ADDR + 0x318, 0x00000030) + +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_CAS*/ +MXC_DCD_ITEM(10, IOMUXC_BASE_ADDR + 0x300, 0x00000030) +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_RAS*/ +MXC_DCD_ITEM(11, IOMUXC_BASE_ADDR + 0x31c, 0x00000030) +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_0*/ +MXC_DCD_ITEM(12, IOMUXC_BASE_ADDR + 0x338, 0x00000028) + +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_RESET*/ +MXC_DCD_ITEM(13, IOMUXC_BASE_ADDR + 0x320, 0x00000030) + +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_SDBA2 - DSE can be configured using Group Control + Register: IOMUXC_SW_PAD_CTL_GRP_CTLDS*/ +MXC_DCD_ITEM(14, IOMUXC_BASE_ADDR + 0x32c, 0x00000000) +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT0*/ +MXC_DCD_ITEM(15, IOMUXC_BASE_ADDR + 0x33c, 0x00000008) +/*IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT1*/ +MXC_DCD_ITEM(16, IOMUXC_BASE_ADDR + 0x340, 0x00000008) +/*IOMUXC_SW_PAD_CTL_GRP_B0DS*/ +MXC_DCD_ITEM(17, IOMUXC_BASE_ADDR + 0x5c4, 0x00000030) +/*IOMUXC_SW_PAD_CTL_GRP_B1DS*/ +MXC_DCD_ITEM(18, IOMUXC_BASE_ADDR + 0x5cc, 0x00000030) +/*IOMUXC_SW_PAD_CTL_GRP_B2DS*/ +MXC_DCD_ITEM(19, IOMUXC_BASE_ADDR + 0x5d4, 0x00000030) +/*IOMUXC_SW_PAD_CTL_GRP_B3DS*/ +MXC_DCD_ITEM(20, IOMUXC_BASE_ADDR + 0x5d8, 0x00000030) + +/*IOMUXC_SW_PAD_CTL_GRP_ADDDS*/ +MXC_DCD_ITEM(21, IOMUXC_BASE_ADDR + 0x5ac, 0x00000030) +/*IOMUXC_SW_PAD_CTL_GRP_CTLDS*/ +MXC_DCD_ITEM(22, IOMUXC_BASE_ADDR + 0x5c8, 0x00000030) +/*IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL*/ +MXC_DCD_ITEM(23, IOMUXC_BASE_ADDR + 0x5b0, 0x00020000) +/*IOMUXC_SW_PAD_CTL_GRP_DDRPKE*/ +MXC_DCD_ITEM(24, IOMUXC_BASE_ADDR + 0x5b4, 0x00000000) +/*IOMUXC_SW_PAD_CTL_GRP_DDRMODE*/ +MXC_DCD_ITEM(25, IOMUXC_BASE_ADDR + 0x5c0, 0x00020000) +/*IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE*/ +MXC_DCD_ITEM(26, IOMUXC_BASE_ADDR + 0x5d0, 0x00080000) + +/*========================================================================*/ +/* DDR Controller Registers*/ +/*========================================================================*/ +/* Manufacturer: Samsung*/ +/* Device Part Number: K4P8G304EB-AGC1*/ +/* Clock Freq.: 400MMHz*/ +/* MMDC channels: MMDC0*/ +/* Density per CS in Gb: 512M*/ +/* Chip Selects used: 2*/ +/* Number of Banks: 8*/ +/* Row address: 14*/ +/* Column address: 10*/ +/* Data bus width 32*/ +/*========================================================================*/ +/*MMDC_P0_BASE_ADDR = 0x021b0000*/ +/*MMDC0_MDSCR, set the Configuration request bit during MMDC set up*/ +MXC_DCD_ITEM(27, MMDC_P0_BASE_ADDR + 0x01c, 0x00008000) + +/*setmem /32 0x021b085c = 0x1b5f01ff*/ +/*LPDDR2 ZQ params*/ +/*LPDDR2 ZQ params*/ +MXC_DCD_ITEM(28, MMDC_P0_BASE_ADDR + 0x85c, 0x1b4700c7) + +/*========================================================================*/ +/* Calibration setup.*/ +/**/ +/*========================================================================*/ + +/*DDR_PHY_P0_MPZQHWCTRL, enable on time ZQ calibration*/ +MXC_DCD_ITEM(29, MMDC_P0_BASE_ADDR + 0x800, 0xa1390003) + +/* Megrez note: If entire word fails, CA bus might be involved. Try changing + this:*/ +/*ca bus abs delay*/ +MXC_DCD_ITEM(30, MMDC_P0_BASE_ADDR + 0x890, 0x00300000) + +/* values of 20,40,50,60,7f tried. no difference seen*/ + +/* Megrez note: This is also for CA bus. A bit-bit fine tuning.*/ +/*setmem /32 0x021b48bc = 0x00055555*/ +/*DDR_PHY_P1_MPWRCADL*/ + +/*frc_msr.*/ +MXC_DCD_ITEM(31, MMDC_P0_BASE_ADDR + 0x8b8, 0x00000800) + +/*DDR_PHY_P0_MPREDQBY0DL3*/ +MXC_DCD_ITEM(32, MMDC_P0_BASE_ADDR + 0x81c, 0x33333333) +/*DDR_PHY_P0_MPREDQBY1DL3*/ +MXC_DCD_ITEM(33, MMDC_P0_BASE_ADDR + 0x820, 0x33333333) +/*DDR_PHY_P0_MPREDQBY2DL3*/ +MXC_DCD_ITEM(34, MMDC_P0_BASE_ADDR + 0x824, 0x33333333) +/*DDR_PHY_P0_MPREDQBY3DL3*/ +MXC_DCD_ITEM(35, MMDC_P0_BASE_ADDR + 0x828, 0x33333333) + +/*write delayes:*/ +/*all byte 0 data & dm delayed by 3*/ +MXC_DCD_ITEM(36, MMDC_P0_BASE_ADDR + 0x82c, 0xf3333333) +/*all byte 1 data & dm delayed by 3*/ +MXC_DCD_ITEM(37, MMDC_P0_BASE_ADDR + 0x830, 0xf3333333) +/*all byte 2 data & dm delayed by 3*/ +MXC_DCD_ITEM(38, MMDC_P0_BASE_ADDR + 0x834, 0xf3333333) +/*all byte 3 data & dm delayed by 3*/ +MXC_DCD_ITEM(39, MMDC_P0_BASE_ADDR + 0x838, 0xf3333333) + +/* Read and write data delay, per byte.*/ +/* For optimized DDR operation it is recommended to run mmdc_calibration on your + board, and replace 4 delay register assigns with resulted values*/ +/* Note:*/ +/* a. DQS gating is not relevant for LPDDR2. DSQ gating calibration section + should be skipped, or the write/read calibration comming after that will + stall*/ +/* b. The calibration code that runs for both MMDC0 & MMDC1 should be used.*/ + +/*it is strongly recommended to run calibration on your board, and replace + bellow values:*/ + +/* Megrez note: New set of values is required for the following 2 delay + registers. Try running calibration code as in Arik APN.*/ + +/*Read calibration*/ +MXC_DCD_ITEM(40, MMDC_P0_BASE_ADDR + 0x848, 0x4241444a) + +/*Write calibration*/ + +MXC_DCD_ITEM(41, MMDC_P0_BASE_ADDR + 0x850, 0x3030312b) + +/*dqs gating dis*/ +MXC_DCD_ITEM(42, MMDC_P0_BASE_ADDR + 0x83c, 0x20000000) +MXC_DCD_ITEM(43, MMDC_P0_BASE_ADDR + 0x840, 0x00000000) + +/* Megrez note: Try enabling and changing the clock delay, as part of the + calibration:*/ +/*setmem /32 0x021b0858 = 0xa00*/ +/*clk delay*/ + +/*fine tune duty cyc to low*/ +MXC_DCD_ITEM(44, MMDC_P0_BASE_ADDR + 0x8c0, 0x24911492) + +/*frc_msr*/ +MXC_DCD_ITEM(45, MMDC_P0_BASE_ADDR + 0x8b8, 0x00000800) + +/*========================================================================*/ +/* Calibration setup end*/ +/*========================================================================*/ + +/* Channel0 - startng address 0x80000000*/ + +/*setmem /32 0x021b000c = 0x3f436133*/ +/* MMDC0_MDCFG0*/ +/*MMDC0_MDCFG0*/ +MXC_DCD_ITEM(46, MMDC_P0_BASE_ADDR + 0x00c, 0x33374133) +/*MMDC0_MDPDC - where is tCKSRX and tCKSRE defined in LPDDR2 data sheet?????*/ +MXC_DCD_ITEM(47, MMDC_P0_BASE_ADDR + 0x004, 0x00020024) +/*MMDC0_MDCFG1*/ +MXC_DCD_ITEM(48, MMDC_P0_BASE_ADDR + 0x010, 0x00100A82) +/*MMDC0_MDCFG2*/ +MXC_DCD_ITEM(49, MMDC_P0_BASE_ADDR + 0x014, 0x00000093) + +/*MMDC0_MDMISC. RALAT=3. Try increasing RALAT if case of failures at higher DDR + freq*/ +MXC_DCD_ITEM(50, MMDC_P0_BASE_ADDR + 0x018, 0x00001688) +/*MMDC0_MDRWD;*/ +MXC_DCD_ITEM(51, MMDC_P0_BASE_ADDR + 0x02c, 0x0f9f26d2) +/*MMDC0_MDOR*/ +MXC_DCD_ITEM(52, MMDC_P0_BASE_ADDR + 0x030, 0x0000020e) + +/*setmem /32 0x021b0038 = 0x001a099a*/ +/* MMDC0_MDCFG3LP*/ +/*MMDC0_MDCFG3LP*/ +MXC_DCD_ITEM(53, MMDC_P0_BASE_ADDR + 0x038, 0x00190778) +/*MMDC0_MDOTC*/ +MXC_DCD_ITEM(54, MMDC_P0_BASE_ADDR + 0x008, 0x00000000) + +/*CS0_END = 0x8fffffff*/ +MXC_DCD_ITEM(55, MMDC_P0_BASE_ADDR + 0x040, 0x0000004f) + +/*MMDC0_MDCTL*/ +MXC_DCD_ITEM(56, MMDC_P0_BASE_ADDR + 0x000, 0xc3110000) + +/* Channel0 : Configure DDR device:*/ +/* Megrez note: Device drive strength change might help, consult device/JEDEC + for the values.*/ + +/*MRW: BA=0 CS=0 MR_ADDR=63 MR_OP=0 //reset*/ +MXC_DCD_ITEM(57, MMDC_P0_BASE_ADDR + 0x01c, 0x003f8030) +/*MRW: BA=0 CS=0 MR_ADDR=10 MR_OP=ff /zq*/ +MXC_DCD_ITEM(58, MMDC_P0_BASE_ADDR + 0x01c, 0xff0a8030) +/*MRW: BA=0 CS=0 MR_ADDR=1 MR_OP=c2*/ +MXC_DCD_ITEM(59, MMDC_P0_BASE_ADDR + 0x01c, 0x82018030) +/*MRW: BA=0 CS=0 MR_ADDR=2 MR_OP=4. tcl=6, tcwl=3*/ +MXC_DCD_ITEM(60, MMDC_P0_BASE_ADDR + 0x01c, 0x04028030) +/*MRW: BA=0 CS=0 MR_ADDR=3 MR_OP=2.drive=240/6*/ +MXC_DCD_ITEM(61, MMDC_P0_BASE_ADDR + 0x01c, 0x02038030) + +/* Need to comment out MRW reset command to CS1 - investigating this*/ +/* Also, adding delays before and after this makes no difference*/ +/*setmem /32 0x021b001c = 0x003f8038*/ +/* MRW: BA=0 CS=1 MR_ADDR=63 MR_OP=0*/ +/*reset*/ +/*MRW: BA=0 CS=1 MR_ADDR=10 MR_OP=ff*/ +MXC_DCD_ITEM(62, MMDC_P0_BASE_ADDR + 0x01c, 0xff0a8038) +/*MRW: BA=0 CS=1 MR_ADDR=1 MR_OP=c2*/ +MXC_DCD_ITEM(63, MMDC_P0_BASE_ADDR + 0x01c, 0x82018038) +/*MRW: BA=0 CS=1 MR_ADDR=2 MR_OP=4. tcl=6, tcwl=3*/ +MXC_DCD_ITEM(64, MMDC_P0_BASE_ADDR + 0x01c, 0x04028038) +/*MRW: BA=0 CS=1 MR_ADDR=3 MR_OP=2.drive=240/6*/ +MXC_DCD_ITEM(65, MMDC_P0_BASE_ADDR + 0x01c, 0x02038038) + +/*######################################################*/ +/*final DDR setup, before operation start:*/ +/*DDR_PHY_P0_MPZQHWCTRL, enable automatic ZQ calibration*/ +MXC_DCD_ITEM(66, MMDC_P0_BASE_ADDR + 0x800, 0xa1310003) + +/*MMDC0_MDREF*/ +MXC_DCD_ITEM(67, MMDC_P0_BASE_ADDR + 0x020, 0x00001800) + +/*DDR_PHY_P0_MPODTCTRL*/ +/*setmem /32 0x021b0818 = 0*/ +MXC_DCD_ITEM(68, MMDC_P0_BASE_ADDR + 0x818, 0x00000000) + +/*DDR_PHY_P0_MPMUR0, frc_msr*/ +MXC_DCD_ITEM(69, MMDC_P0_BASE_ADDR + 0x8b8, 0x00000800) + +/*MMDC0_MDPDC now SDCTL power down enabled*/ +MXC_DCD_ITEM(70, MMDC_P0_BASE_ADDR + 0x004, 0x00025564) + +/*MMDC0_MAPSR ADOPT power down enabled*/ +MXC_DCD_ITEM(71, MMDC_P0_BASE_ADDR + 0x404, 0x00011006) + +/*MMDC0_MDSCR, clear this register (especially the configuration bit as + initialization is complete)*/ +MXC_DCD_ITEM(72, MMDC_P0_BASE_ADDR + 0x01c, 0x00000000) +/*###################put the ddr script here ######################*/ + +#else + +.section ".text.flasheader", "x" +origin: + b _start + .org CONFIG_FLASH_HEADER_OFFSET + +/* First IVT to copy the plugin that initializes the system into OCRAM */ +ivt_header: .long 0x402000D1 /*Tag=0xD1, Len=0x0020, Ver=0x40 */ +app_code_jump_v: .long IRAM_FREE_START + (plugin_start - origin) /* Plugin entry point, address after the second IVT table */ +reserv1: .long 0x0 +dcd_ptr: .long 0x0 +boot_data_ptr: .long IRAM_FREE_START + (boot_data - origin) /*0x00907420*/ +self_ptr: .long IRAM_FREE_START + (ivt_header - origin) +app_code_csf: .long 0x0 +reserv2: .long 0x0 + +boot_data: .long IRAM_FREE_START +image_len: .long 16*1024 /* plugin can be upto 16KB in size */ +plugin: .long 0x1 /* Enable plugin flag */ + +/* Second IVT to give entry point into the bootloader copied to DDR */ +ivt2_header: .long 0x402000D1 /*Tag=0xD1, Len=0x0020, Ver=0x40 */ +app2_code_jump_v: .long _start /* Entry point for uboot */ +reserv3: .long 0x0 +dcd2_ptr: .long 0x0 +boot_data2_ptr: .long boot_data2 +self_ptr2: .long ivt2_header +app_code_csf2: .long 0x0 +reserv4: .long 0x0 + +boot_data2: .long TEXT_BASE +image_len2: .long _end_of_copy - TEXT_BASE + CONFIG_FLASH_HEADER_OFFSET +plugin2: .long 0x0 + +/* Here starts the plugin code */ +plugin_start: +/* Save the return address and the function arguments */ + push {r0-r4, lr} + +/* + * The following is following Megrez LPDDR init script + * Ver 0.93 + */ +/* + * CCM Configuration + */ + ldr r0, =CCM_BASE_ADDR +/*MXC_DCD_ITEM(1, CCM_BASE_ADDR + 0x018, 0x00260324)*/ + ldr r1, =0x00260324 + str r1, [r0, #0x018] + +/* + * IOMUX Configuration + */ + ldr r0, =IOMUXC_BASE_ADDR +/*MXC_DCD_ITEM(2, IOMUXC_BASE_ADDR + 0x344, 0x00003030)*/ + ldr r1, =0x00003030 + str r1, [r0, #0x344] +/*MXC_DCD_ITEM(3, IOMUXC_BASE_ADDR + 0x348, 0x00003030)*/ + ldr r1, =0x00003030 + str r1, [r0, #0x348] +/*MXC_DCD_ITEM(4, IOMUXC_BASE_ADDR + 0x34c, 0x00003030)*/ + ldr r1, =0x00003030 + str r1, [r0, #0x34c] +/*MXC_DCD_ITEM(5, IOMUXC_BASE_ADDR + 0x350, 0x00003030)*/ + ldr r1, =0x00003030 + str r1, [r0, #0x350] +/*MXC_DCD_ITEM(6, IOMUXC_BASE_ADDR + 0x30c, 0x00000030)*/ + ldr r1, =0x00000030 + str r1, [r0, #0x30c] +/*MXC_DCD_ITEM(7, IOMUXC_BASE_ADDR + 0x310, 0x00000030)*/ + ldr r1, =0x00000030 + str r1, [r0, #0x310] +/*MXC_DCD_ITEM(8, IOMUXC_BASE_ADDR + 0x314, 0x00000030)*/ + ldr r1, =0x00000030 + str r1, [r0, #0x314] +/*MXC_DCD_ITEM(9, IOMUXC_BASE_ADDR + 0x318, 0x00000030)*/ + ldr r1, =0x00000030 + str r1, [r0, #0x318] +/*MXC_DCD_ITEM(10, IOMUXC_BASE_ADDR + 0x300, 0x00000030)*/ + ldr r1, =0x00000030 + str r1, [r0, #0x300] +/*MXC_DCD_ITEM(11, IOMUXC_BASE_ADDR + 0x31c, 0x00000030)*/ + ldr r1, =0x00000030 + str r1, [r0, #0x31c] +/*MXC_DCD_ITEM(12, IOMUXC_BASE_ADDR + 0x338, 0x00000028)*/ + ldr r1, =0x00000028 + str r1, [r0, #0x338] +/*MXC_DCD_ITEM(13, IOMUXC_BASE_ADDR + 0x320, 0x00000030)*/ + ldr r1, =0x00000030 + str r1, [r0, #0x320] +/*MXC_DCD_ITEM(14, IOMUXC_BASE_ADDR + 0x32c, 0x00000000)*/ + ldr r1, =0x00000000 + str r1, [r0, #0x32c] +/*MXC_DCD_ITEM(15, IOMUXC_BASE_ADDR + 0x33c, 0x00000008)*/ + ldr r1, =0x00000008 + str r1, [r0, #0x33c] +/*MXC_DCD_ITEM(16, IOMUXC_BASE_ADDR + 0x340, 0x00000008)*/ + ldr r1, =0x00000008 + str r1, [r0, #0x340] +/*MXC_DCD_ITEM(17, IOMUXC_BASE_ADDR + 0x5c4, 0x00000030)*/ + ldr r1, =0x00000030 + str r1, [r0, #0x5c4] +/*MXC_DCD_ITEM(18, IOMUXC_BASE_ADDR + 0x5cc, 0x00000030)*/ + ldr r1, =0x00000030 + str r1, [r0, #0x5cc] +/*MXC_DCD_ITEM(19, IOMUXC_BASE_ADDR + 0x5d4, 0x00000030)*/ + ldr r1, =0x00000030 + str r1, [r0, #0x5d4] +/*MXC_DCD_ITEM(20, IOMUXC_BASE_ADDR + 0x5d8, 0x00000030)*/ + ldr r1, =0x00000030 + str r1, [r0, #0x5d8] +/*MXC_DCD_ITEM(21, IOMUXC_BASE_ADDR + 0x5ac, 0x00000030)*/ + ldr r1, =0x00000030 + str r1, [r0, #0x5ac] +/*MXC_DCD_ITEM(22, IOMUXC_BASE_ADDR + 0x5c8, 0x00000030)*/ + ldr r1, =0x00000030 + str r1, [r0, #0x5c8] +/*MXC_DCD_ITEM(23, IOMUXC_BASE_ADDR + 0x5b0, 0x00020000)*/ + ldr r1, =0x00020000 + str r1, [r0, #0x5b0] +/*MXC_DCD_ITEM(24, IOMUXC_BASE_ADDR + 0x5b4, 0x00000000)*/ + ldr r1, =0x00000000 + str r1, [r0, #0x5b4] +/*MXC_DCD_ITEM(25, IOMUXC_BASE_ADDR + 0x5c0, 0x00020000)*/ + ldr r1, =0x00020000 + str r1, [r0, #0x5c0] +/*MXC_DCD_ITEM(26, IOMUXC_BASE_ADDR + 0x5d0, 0x00080000)*/ + ldr r1, =0x00080000 + str r1, [r0, #0x5d0] + +/* + * MMDC Configuration + */ + ldr r0, =MMDC_P0_BASE_ADDR +/*MXC_DCD_ITEM(27, MMDC_P0_BASE_ADDR + 0x01c, 0x00008000)*/ + ldr r1, =0x00008000 + str r1, [r0, #0x01c] +/*MXC_DCD_ITEM(28, MMDC_P0_BASE_ADDR + 0x85c, 0x1b4700c7)*/ + ldr r1, =0x1b4700c7 + str r1, [r0, #0x85c] +/*MXC_DCD_ITEM(29, MMDC_P0_BASE_ADDR + 0x800, 0xa1390003)*/ + ldr r1, =0xa1390003 + str r1, [r0, #0x800] +/*MXC_DCD_ITEM(30, MMDC_P0_BASE_ADDR + 0x890, 0x00300000)*/ + ldr r1, =0x00300000 + str r1, [r0, #0x890] +/*MXC_DCD_ITEM(31, MMDC_P0_BASE_ADDR + 0x8b8, 0x00000800)*/ + ldr r1, =0x00000800 + str r1, [r0, #0x8b8] +/*MXC_DCD_ITEM(32, MMDC_P0_BASE_ADDR + 0x81c, 0x33333333)*/ + ldr r1, =0x33333333 + str r1, [r0, #0x81c] +/*MXC_DCD_ITEM(33, MMDC_P0_BASE_ADDR + 0x820, 0x33333333)*/ + ldr r1, =0x33333333 + str r1, [r0, #0x820] +/*MXC_DCD_ITEM(34, MMDC_P0_BASE_ADDR + 0x824, 0x33333333)*/ + ldr r1, =0x33333333 + str r1, [r0, #0x824] +/*MXC_DCD_ITEM(35, MMDC_P0_BASE_ADDR + 0x828, 0x33333333)*/ + ldr r1, =0x33333333 + str r1, [r0, #0x828] +/*MXC_DCD_ITEM(36, MMDC_P0_BASE_ADDR + 0x82c, 0xf3333333)*/ + ldr r1, =0xf3333333 + str r1, [r0, #0x82c] +/*MXC_DCD_ITEM(37, MMDC_P0_BASE_ADDR + 0x830, 0xf3333333)*/ + ldr r1, =0xf3333333 + str r1, [r0, #0x830] +/*MXC_DCD_ITEM(38, MMDC_P0_BASE_ADDR + 0x834, 0xf3333333)*/ + ldr r1, =0xf3333333 + str r1, [r0, #0x834] +/*MXC_DCD_ITEM(39, MMDC_P0_BASE_ADDR + 0x838, 0xf3333333)*/ + ldr r1, =0xf3333333 + str r1, [r0, #0x838] +/*MXC_DCD_ITEM(40, MMDC_P0_BASE_ADDR + 0x848, 0x4241444a)*/ + ldr r1, =0x4241444a + str r1, [r0, #0x848] +/*MXC_DCD_ITEM(41, MMDC_P0_BASE_ADDR + 0x850, 0x3030312b)*/ + ldr r1, =0x3030312b + str r1, [r0, #0x850] +/*MXC_DCD_ITEM(42, MMDC_P0_BASE_ADDR + 0x83c, 0x20000000)*/ + ldr r1, =0x20000000 + str r1, [r0, #0x83c] +/*MXC_DCD_ITEM(43, MMDC_P0_BASE_ADDR + 0x840, 0x00000000)*/ + ldr r1, =0x00000000 + str r1, [r0, #0x840] +/*MXC_DCD_ITEM(44, MMDC_P0_BASE_ADDR + 0x8c0, 0x24911492)*/ + ldr r1, =0x24911492 + str r1, [r0, #0x8c0] +/*MXC_DCD_ITEM(45, MMDC_P0_BASE_ADDR + 0x8b8, 0x00000800)*/ + ldr r1, =0x00000800 + str r1, [r0, #0x8b8] +/*MXC_DCD_ITEM(46, MMDC_P0_BASE_ADDR + 0x00c, 0x33374133)*/ + ldr r1, =0x33374133 + str r1, [r0, #0x00c] +/*MXC_DCD_ITEM(47, MMDC_P0_BASE_ADDR + 0x004, 0x00020024)*/ + ldr r1, =0x00020024 + str r1, [r0, #0x004] +/*MXC_DCD_ITEM(48, MMDC_P0_BASE_ADDR + 0x010, 0x00100A82)*/ + ldr r1, =0x00100A82 + str r1, [r0, #0x010] +/*MXC_DCD_ITEM(49, MMDC_P0_BASE_ADDR + 0x014, 0x00000093)*/ + ldr r1, =0x00000093 + str r1, [r0, #0x014] +/*MXC_DCD_ITEM(50, MMDC_P0_BASE_ADDR + 0x018, 0x00001688)*/ + ldr r1, =0x00001688 + str r1, [r0, #0x018] +/*MXC_DCD_ITEM(51, MMDC_P0_BASE_ADDR + 0x02c, 0x0f9f26d2)*/ + ldr r1, =0x0f9f26d2 + str r1, [r0, #0x02c] +/*MXC_DCD_ITEM(52, MMDC_P0_BASE_ADDR + 0x030, 0x0000020e)*/ + ldr r1, =0x0000020e + str r1, [r0, #0x030] +/*MXC_DCD_ITEM(53, MMDC_P0_BASE_ADDR + 0x038, 0x00190778)*/ + ldr r1, =0x00190778 + str r1, [r0, #0x038] +/*MXC_DCD_ITEM(54, MMDC_P0_BASE_ADDR + 0x008, 0x00000000)*/ + ldr r1, =0x00000000 + str r1, [r0, #0x008] +/*MXC_DCD_ITEM(55, MMDC_P0_BASE_ADDR + 0x040, 0x0000004f)*/ + ldr r1, =0x0000004f + str r1, [r0, #0x040] +/*MXC_DCD_ITEM(56, MMDC_P0_BASE_ADDR + 0x000, 0xc3110000)*/ + ldr r1, =0xc3110000 + str r1, [r0, #0x000] +/*MXC_DCD_ITEM(57, MMDC_P0_BASE_ADDR + 0x01c, 0x003f8030)*/ + ldr r1, =0x003f8030 + str r1, [r0, #0x01c] +/*MXC_DCD_ITEM(58, MMDC_P0_BASE_ADDR + 0x01c, 0xff0a8030)*/ + ldr r1, =0xff0a8030 + str r1, [r0, #0x01c] +/*MXC_DCD_ITEM(59, MMDC_P0_BASE_ADDR + 0x01c, 0x82018030)*/ + ldr r1, =0x82018030 + str r1, [r0, #0x01c] +/*MXC_DCD_ITEM(60, MMDC_P0_BASE_ADDR + 0x01c, 0x04028030)*/ + ldr r1, =0x04028030 + str r1, [r0, #0x01c] +/*MXC_DCD_ITEM(61, MMDC_P0_BASE_ADDR + 0x01c, 0x02038030)*/ + ldr r1, =0x02038030 + str r1, [r0, #0x01c] +/*MXC_DCD_ITEM(62, MMDC_P0_BASE_ADDR + 0x01c, 0xff0a8038)*/ + ldr r1, =0xff0a8038 + str r1, [r0, #0x01c] +/*MXC_DCD_ITEM(63, MMDC_P0_BASE_ADDR + 0x01c, 0x82018038)*/ + ldr r1, =0x82018038 + str r1, [r0, #0x01c] +/*MXC_DCD_ITEM(64, MMDC_P0_BASE_ADDR + 0x01c, 0x04028038)*/ + ldr r1, =0x04028038 + str r1, [r0, #0x01c] +/*MXC_DCD_ITEM(65, MMDC_P0_BASE_ADDR + 0x01c, 0x02038038)*/ + ldr r1, =0x02038038 + str r1, [r0, #0x01c] +/*MXC_DCD_ITEM(66, MMDC_P0_BASE_ADDR + 0x800, 0xa1310003)*/ + ldr r1, =0xa1310003 + str r1, [r0, #0x800] +/*MXC_DCD_ITEM(67, MMDC_P0_BASE_ADDR + 0x020, 0x00001800)*/ + ldr r1, =0x00001800 + str r1, [r0, #0x020] +/*MXC_DCD_ITEM(68, MMDC_P0_BASE_ADDR + 0x818, 0x00000000)*/ + ldr r1, =0x00000000 + str r1, [r0, #0x818] +/*MXC_DCD_ITEM(69, MMDC_P0_BASE_ADDR + 0x8b8, 0x00000800)*/ + ldr r1, =0x00000800 + str r1, [r0, #0x8b8] +/*MXC_DCD_ITEM(70, MMDC_P0_BASE_ADDR + 0x004, 0x00025564)*/ + ldr r1, =0x00025564 + str r1, [r0, #0x004] +/*MXC_DCD_ITEM(71, MMDC_P0_BASE_ADDR + 0x404, 0x00011006)*/ + ldr r1, =0x00011006 + str r1, [r0, #0x404] +/*MXC_DCD_ITEM(72, MMDC_P0_BASE_ADDR + 0x01c, 0x00000000)*/ + ldr r1, =0x00000000 + str r1, [r0, #0x01c] + +/* + * End of LPDDR init script + */ + +/* + The following is to fill in those arguments for this ROM function + pu_irom_hwcnfg_setup(void **start, size_t *bytes, const void *boot_data) + + This function is used to copy data from the storage media into DDR. + + start - Initial (possibly partial) image load address on entry. Final image load address on exit. + bytes - Initial (possibly partial) image size on entry. Final image size on exit. + boot_data - Initial @ref ivt Boot Data load address. +*/ + + adr r0, DDR_DEST_ADDR + adr r1, COPY_SIZE + adr r2, BOOT_DATA + +/* + * check the _pu_irom_api_table for the address + * pu_irom_hwcnfg_setup is in 0x1f20 + */ +before_calling_rom___pu_irom_hwcnfg_setup: + mov r4, #0x1f00 + add r4, r4, #0x21 + blx r4 /* This address might change in future ROM versions */ +after_calling_rom___pu_irom_hwcnfg_setup: + +/* To return to ROM from plugin, we need to fill in these argument. + * Here is what need to do: + * Need to construct the paramters for this function before return to ROM: + * plugin_download(void **start, size_t *bytes, UINT32 *ivt_offset) + */ + pop {r0-r4, lr} + ldr r5, DDR_DEST_ADDR + str r5, [r0] + ldr r5, COPY_SIZE + str r5, [r1] + mov r5, #0x400 /* Point to the second IVT table at offset 0x42C */ + add r5, r5, #0x2C + str r5, [r2] + mov r0, #1 + + bx lr /* return back to ROM code */ + +DDR_DEST_ADDR: .word TEXT_BASE +COPY_SIZE: .word _end_of_copy - TEXT_BASE + CONFIG_FLASH_HEADER_OFFSET +BOOT_DATA: .word TEXT_BASE + .word _end_of_copy - TEXT_BASE + CONFIG_FLASH_HEADER_OFFSET + .word 0 +#endif /* CONFIG_FLASH_PLUG_IN */ + +#endif /* CONFIG_FLASH_HEADER*/ diff --git a/board/freescale/mx6sl_evk/lowlevel_init.S b/board/freescale/mx6sl_evk/lowlevel_init.S new file mode 100644 index 0000000..4a5eb53 --- /dev/null +++ b/board/freescale/mx6sl_evk/lowlevel_init.S @@ -0,0 +1,139 @@ +/* + * Copyright (C) 2010-2012 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <asm/arch/mx6.h> + +/* + Disable L2Cache because ROM turn it on when uboot use plug-in. + If L2Cache is on default, there are cache coherence problem if kernel have + not config L2Cache. +*/ +.macro init_l2cc + ldr r1, =0xa02000 + ldr r0, =0x0 + str r0, [r1, #0x100] +.endm /* init_l2cc */ + +/* invalidate the D-CACHE */ +.macro inv_dcache + mov r0,#0 + mcr p15,2,r0,c0,c0,0 /* cache size selection register, select dcache */ + mrc p15,1,r0,c0,c0,0 /* cache size ID register */ + mov r0,r0,ASR #13 + ldr r3,=0xfff + and r0,r0,r3 + cmp r0,#0x7f + moveq r6,#0x1000 + beq size_done + cmp r0,#0xff + moveq r6,#0x2000 + movne r6,#0x4000 + +size_done: + mov r2,#0 + mov r3,#0x40000000 + mov r4,#0x80000000 + mov r5,#0xc0000000 + +d_inv_loop: + mcr p15,0,r2,c7,c6,2 /* invalidate dcache by set / way */ + mcr p15,0,r3,c7,c6,2 /* invalidate dcache by set / way */ + mcr p15,0,r4,c7,c6,2 /* invalidate dcache by set / way */ + mcr p15,0,r5,c7,c6,2 /* invalidate dcache by set / way */ + add r2,r2,#0x20 + add r3,r3,#0x20 + add r4,r4,#0x20 + add r5,r5,#0x20 + + cmp r2,r6 + bne d_inv_loop +.endm + +/* AIPS setup - Only setup MPROTx registers. + * The PACR default values are good.*/ +.macro init_aips + /* + * Set all MPROTx to be non-bufferable, trusted for R/W, + * not forced to user-mode. + */ + ldr r0, =AIPS1_ON_BASE_ADDR + ldr r1, =0x77777777 + str r1, [r0, #0x0] + str r1, [r0, #0x4] + ldr r1, =0x0 + str r1, [r0, #0x40] + str r1, [r0, #0x44] + str r1, [r0, #0x48] + str r1, [r0, #0x4C] + str r1, [r0, #0x50] + + ldr r0, =AIPS2_ON_BASE_ADDR + ldr r1, =0x77777777 + str r1, [r0, #0x0] + str r1, [r0, #0x4] + ldr r1, =0x0 + str r1, [r0, #0x40] + str r1, [r0, #0x44] + str r1, [r0, #0x48] + str r1, [r0, #0x4C] + str r1, [r0, #0x50] +.endm /* init_aips */ + +.macro setup_pll pll, freq +.endm + +.macro init_clock + + /* Restore the default values in the Gate registers */ + ldr r0, CCM_BASE_ADDR_W + ldr r1, =0x00C0003F + str r1, [r0, #CLKCTL_CCGR0] + ldr r1, =0x0030FC00 + str r1, [r0, #CLKCTL_CCGR1] + ldr r1, =0x0FFFC000 + str r1, [r0, #CLKCTL_CCGR2] + ldr r1, =0x3FF00000 + str r1, [r0, #CLKCTL_CCGR3] + ldr r1, =0x00FFF300 + str r1, [r0, #CLKCTL_CCGR4] + ldr r1, =0x0F0000C3 + str r1, [r0, #CLKCTL_CCGR5] + ldr r1, =0x000003FC + str r1, [r0, #CLKCTL_CCGR6] +.endm + +.section ".text.init", "x" + +.globl lowlevel_init +lowlevel_init: + + inv_dcache + + init_l2cc + + init_aips + + init_clock + + mov pc, lr + +/* Board level setting value */ +ANATOP_BASE_ADDR_W: .word ANATOP_BASE_ADDR +CCM_BASE_ADDR_W: .word CCM_BASE_ADDR diff --git a/board/freescale/mx6sl_evk/mx6sl_evk.c b/board/freescale/mx6sl_evk/mx6sl_evk.c new file mode 100644 index 0000000..e63eb0c --- /dev/null +++ b/board/freescale/mx6sl_evk/mx6sl_evk.c @@ -0,0 +1,1095 @@ +/* + * Copyright (C) 2010-2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/mx6.h> +#include <asm/arch/mx6_pins.h> +#include <asm/arch/mx6sl_pins.h> +#if defined(CONFIG_SECURE_BOOT) +#include <asm/arch/mx6_secure.h> +#endif +#include <asm/arch/iomux-v3.h> +#include <asm/arch/regs-anadig.h> +#include <asm/errno.h> +#ifdef CONFIG_MXC_FEC +#include <miiphy.h> +#endif + +#if defined(CONFIG_MXC_EPDC) +#include <lcd.h> +#endif + +#ifdef CONFIG_IMX_ECSPI +#include <imx_spi.h> +#endif + +#ifdef CONFIG_CMD_MMC +#include <mmc.h> +#include <fsl_esdhc.h> +#endif + +#ifdef CONFIG_MXC_GPIO +#include <asm/gpio.h> +#include <asm/arch/gpio.h> +#endif + +#ifdef CONFIG_ANDROID_RECOVERY +#include <recovery.h> +#endif + +#if CONFIG_I2C_MXC +#include <i2c.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +static u32 system_rev; +static enum boot_device boot_dev; + +#define USB_OTG_PWR IMX_GPIO_NR(4, 0) +#define USB_H1_PWR IMX_GPIO_NR(4, 2) + +static inline void setup_boot_device(void) +{ + uint soc_sbmr = readl(SRC_BASE_ADDR + 0x4); + uint bt_mem_ctl = (soc_sbmr & 0x000000FF) >> 4; + uint bt_mem_type = (soc_sbmr & 0x00000008) >> 3; + + switch (bt_mem_ctl) { + case 0x0: + if (bt_mem_type) + boot_dev = ONE_NAND_BOOT; + else + boot_dev = WEIM_NOR_BOOT; + break; + case 0x3: + if (bt_mem_type) + boot_dev = I2C_BOOT; + else + boot_dev = SPI_NOR_BOOT; + break; + case 0x4: + case 0x5: + boot_dev = SD_BOOT; + break; + case 0x6: + case 0x7: + boot_dev = MMC_BOOT; + break; + break; + default: + boot_dev = UNKNOWN_BOOT; + break; + } +} + +enum boot_device get_boot_device(void) +{ + return boot_dev; +} + +u32 get_board_rev(void) +{ + + system_rev = 0x60000 | BOARD_REV_3; /* means revB: EVK */ + + return system_rev; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} + +static void setup_uart(void) +{ + /* UART1 TXD */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_UART1_TXD__UART1_TXD); + + /* UART1 RXD */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_UART1_RXD__UART1_RXD); +} + +#ifdef CONFIG_NET_MULTI +int board_eth_init(bd_t *bis) +{ + int rc = -ENODEV; + + return rc; +} +#endif + +#ifdef CONFIG_CMD_MMC + +/* On this board, only SD3 can support 1.8V signalling + * that is required for UHS-I mode of operation. + * Last element in struct is used to indicate 1.8V support. + */ +struct fsl_esdhc_cfg usdhc_cfg[3] = { + {USDHC1_BASE_ADDR, 1, 1, 1, 1}, + {USDHC2_BASE_ADDR, 1, 1, 1, 1}, + {USDHC3_BASE_ADDR, 1, 1, 1, 1}, +}; + +#ifdef CONFIG_DYNAMIC_MMC_DEVNO +int get_mmc_env_devno(void) +{ + uint soc_sbmr = readl(SRC_BASE_ADDR + 0x4); + + if (SD_BOOT == boot_dev || MMC_BOOT == boot_dev) { + /* BOOT_CFG2[3] and BOOT_CFG2[4] */ + return (soc_sbmr & 0x00001800) >> 11; + } else + return -1; + +} +#endif + +iomux_v3_cfg_t usdhc1_pads[] = { + /* 8 bit SD */ + MX6SL_PAD_SD1_CLK__USDHC1_CLK, + MX6SL_PAD_SD1_CMD__USDHC1_CMD, + MX6SL_PAD_SD1_DAT0__USDHC1_DAT0, + MX6SL_PAD_SD1_DAT1__USDHC1_DAT1, + MX6SL_PAD_SD1_DAT2__USDHC1_DAT2, + MX6SL_PAD_SD1_DAT3__USDHC1_DAT3, + MX6SL_PAD_SD1_DAT4__USDHC1_DAT4, + MX6SL_PAD_SD1_DAT5__USDHC1_DAT5, + MX6SL_PAD_SD1_DAT6__USDHC1_DAT6, + MX6SL_PAD_SD1_DAT7__USDHC1_DAT7, +}; + +iomux_v3_cfg_t usdhc2_pads[] = { + /* boot SD */ + MX6SL_PAD_SD2_CLK__USDHC2_CLK, + MX6SL_PAD_SD2_CMD__USDHC2_CMD, + MX6SL_PAD_SD2_DAT0__USDHC2_DAT0, + MX6SL_PAD_SD2_DAT1__USDHC2_DAT1, + MX6SL_PAD_SD2_DAT2__USDHC2_DAT2, + MX6SL_PAD_SD2_DAT3__USDHC2_DAT3, + MX6SL_PAD_SD2_DAT4__USDHC2_DAT4, + MX6SL_PAD_SD2_DAT5__USDHC2_DAT5, + MX6SL_PAD_SD2_DAT6__USDHC2_DAT6, + MX6SL_PAD_SD2_DAT7__USDHC2_DAT7, +}; + +iomux_v3_cfg_t usdhc3_pads[] = { + MX6SL_PAD_SD3_CLK__USDHC3_CLK, + MX6SL_PAD_SD3_CMD__USDHC3_CMD, + MX6SL_PAD_SD3_DAT0__USDHC3_DAT0, + MX6SL_PAD_SD3_DAT1__USDHC3_DAT1, + MX6SL_PAD_SD3_DAT2__USDHC3_DAT2, + MX6SL_PAD_SD3_DAT3__USDHC3_DAT3, +}; + +int usdhc_gpio_init(bd_t *bis) +{ + s32 status = 0; + u32 index = 0; + + for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { + switch (index) { + case 0: + mxc_iomux_v3_setup_multiple_pads(usdhc1_pads, + ARRAY_SIZE(usdhc1_pads)); + break; + case 1: + mxc_iomux_v3_setup_multiple_pads(usdhc2_pads, + ARRAY_SIZE(usdhc2_pads)); + break; + case 2: + mxc_iomux_v3_setup_multiple_pads(usdhc3_pads, + ARRAY_SIZE(usdhc3_pads)); + break; + default: + printf("Warning: you configured more USDHC controllers" + "(%d) then supported by the board (%d)\n", + index + 1, CONFIG_SYS_FSL_USDHC_NUM); + return status; + } + status |= fsl_esdhc_initialize(bis, &usdhc_cfg[index]); + } + + return status; +} + +int board_mmc_init(bd_t *bis) +{ + if (!usdhc_gpio_init(bis)) + return 0; + else + return -1; +} + +#ifdef CONFIG_MXC_EPDC +#ifdef CONFIG_SPLASH_SCREEN +int setup_splash_img() +{ +#ifdef CONFIG_SPLASH_IS_IN_MMC + int mmc_dev = get_mmc_env_devno(); + ulong offset = CONFIG_SPLASH_IMG_OFFSET; + ulong size = CONFIG_SPLASH_IMG_SIZE; + ulong addr = 0; + char *s = NULL; + struct mmc *mmc = find_mmc_device(mmc_dev); + uint blk_start, blk_cnt, n; + + s = getenv("splashimage"); + + if (NULL == s) { + puts("env splashimage not found!\n"); + return -1; + } + addr = simple_strtoul(s, NULL, 16); + + if (!mmc) { + printf("MMC Device %d not found\n", mmc_dev); + return -1; + } + + if (mmc_init(mmc)) { + puts("MMC init failed\n"); + return -1; + } + + blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len; + blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len; + n = mmc->block_dev.block_read(mmc_dev, blk_start, + blk_cnt, (u_char *) addr); + flush_cache((ulong) addr, blk_cnt * mmc->read_bl_len); + + return (n == blk_cnt) ? 0 : -1; +#endif +} +#endif + +vidinfo_t panel_info = { + .vl_refresh = 85, + .vl_col = 800, + .vl_row = 600, + .vl_pixclock = 26666667, + .vl_left_margin = 8, + .vl_right_margin = 100, + .vl_upper_margin = 4, + .vl_lower_margin = 8, + .vl_hsync = 4, + .vl_vsync = 1, + .vl_sync = 0, + .vl_mode = 0, + .vl_flag = 0, + .vl_bpix = 3, + .cmap = 0, +}; + +struct epdc_timing_params panel_timings = { + .vscan_holdoff = 4, + .sdoed_width = 10, + .sdoed_delay = 20, + .sdoez_width = 10, + .sdoez_delay = 20, + .gdclk_hp_offs = 419, + .gdsp_offs = 20, + .gdoe_offs = 0, + .gdclk_offs = 5, + .num_ce = 1, +}; + +static void setup_epdc_power() +{ + unsigned int reg; + + /* Setup epdc voltage */ + + /* EPDC_PWRSTAT - GPIO2[13] for PWR_GOOD status */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_PWRSTAT__GPIO_2_13); + + /* EPDC_VCOM0 - GPIO2[3] for VCOM control */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_VCOM0__GPIO_2_3); + + /* Set as output */ + reg = readl(GPIO2_BASE_ADDR + GPIO_GDIR); + reg |= (1 << 3); + writel(reg, GPIO2_BASE_ADDR + GPIO_GDIR); + + /* EPDC_PWRWAKEUP - GPIO2[14] for EPD PMIC WAKEUP */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_PWRWAKEUP__GPIO_2_14); + /* Set as output */ + reg = readl(GPIO2_BASE_ADDR + GPIO_GDIR); + reg |= (1 << 14); + writel(reg, GPIO2_BASE_ADDR + GPIO_GDIR); + + /* EPDC_PWRCTRL0 - GPIO2[7] for EPD PWR CTL0 */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_PWRCTRL0__GPIO_2_7); + /* Set as output */ + reg = readl(GPIO2_BASE_ADDR + GPIO_GDIR); + reg |= (1 << 7); + writel(reg, GPIO2_BASE_ADDR + GPIO_GDIR); +} + +void epdc_power_on() +{ + unsigned int reg; + + /* Set EPD_PWR_CTL0 to high - enable EINK_VDD (3.15) */ + reg = readl(GPIO2_BASE_ADDR + GPIO_DR); + reg |= (1 << 7); + writel(reg, GPIO2_BASE_ADDR + GPIO_DR); + + /* Set PMIC Wakeup to high - enable Display power */ + reg = readl(GPIO2_BASE_ADDR + GPIO_DR); + reg |= (1 << 14); + writel(reg, GPIO2_BASE_ADDR + GPIO_DR); + + /* Wait for PWRGOOD == 1 */ + while (1) { + reg = readl(GPIO2_BASE_ADDR + GPIO_DR); + if (!(reg & (1 << 13))) + break; + + udelay(100); + } + + /* Enable VCOM */ + reg = readl(GPIO2_BASE_ADDR + GPIO_DR); + reg |= (1 << 3); + writel(reg, GPIO2_BASE_ADDR + GPIO_DR); + + reg = readl(GPIO2_BASE_ADDR + GPIO_DR); + + udelay(500); +} + +void epdc_power_off() +{ + unsigned int reg; + /* Set PMIC Wakeup to low - disable Display power */ + reg = readl(GPIO2_BASE_ADDR + GPIO_DR); + reg &= ~(1 << 14); + writel(reg, GPIO2_BASE_ADDR + GPIO_DR); + + /* Disable VCOM */ + reg = readl(GPIO2_BASE_ADDR + GPIO_DR); + reg &= ~(1 << 3); + writel(reg, GPIO2_BASE_ADDR + GPIO_DR); + + /* Set EPD_PWR_CTL0 to low - disable EINK_VDD (3.15) */ + reg = readl(GPIO2_BASE_ADDR + GPIO_DR); + reg &= ~(1 << 7); + writel(reg, GPIO2_BASE_ADDR + GPIO_DR); +} + +int setup_waveform_file() +{ +#ifdef CONFIG_WAVEFORM_FILE_IN_MMC + int mmc_dev = get_mmc_env_devno(); + ulong offset = CONFIG_WAVEFORM_FILE_OFFSET; + ulong size = CONFIG_WAVEFORM_FILE_SIZE; + ulong addr = CONFIG_WAVEFORM_BUF_ADDR; + char *s = NULL; + struct mmc *mmc = find_mmc_device(mmc_dev); + uint blk_start, blk_cnt, n; + + if (!mmc) { + printf("MMC Device %d not found\n", mmc_dev); + return -1; + } + + if (mmc_init(mmc)) { + puts("MMC init failed\n"); + return -1; + } + + blk_start = ALIGN(offset, mmc->read_bl_len) / mmc->read_bl_len; + blk_cnt = ALIGN(size, mmc->read_bl_len) / mmc->read_bl_len; + n = mmc->block_dev.block_read(mmc_dev, blk_start, + blk_cnt, (u_char *) addr); + flush_cache((ulong) addr, blk_cnt * mmc->read_bl_len); + + return (n == blk_cnt) ? 0 : -1; +#else + return -1; +#endif +} + +static void setup_epdc() +{ + unsigned int reg; + + /* epdc iomux settings */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_D0__EPDC_SDDO_0); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_D1__EPDC_SDDO_1); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_D2__EPDC_SDDO_2); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_D3__EPDC_SDDO_3); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_D4__EPDC_SDDO_4); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_D5__EPDC_SDDO_5); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_D6__EPDC_SDDO_6); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_D7__EPDC_SDDO_7); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_GDCLK__EPDC_GDCLK); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_GDSP__EPDC_GDSP); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_GDOE__EPDC_GDOE); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_GDRL__EPDC_GDRL); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_SDCLK__EPDC_SDCLK); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_SDOE__EPDC_SDOE); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_SDLE__EPDC_SDLE); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_SDSHR__EPDC_SDSHR); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_BDR0__EPDC_BDR_0); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_SDCE0__EPDC_SDCE_0); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_SDCE1__EPDC_SDCE_1); + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_SDCE2__EPDC_SDCE_2); + + /*** epdc Maxim PMIC settings ***/ + + /* EPDC PWRSTAT - GPIO2[13] for PWR_GOOD status */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_PWRSTAT__GPIO_2_13); + + /* EPDC VCOM0 - GPIO2[3] for VCOM control */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_VCOM0__GPIO_2_3); + + /* UART4 TXD - GPIO2[14] for EPD PMIC WAKEUP */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_PWRWAKEUP__GPIO_2_14); + + /* EIM_A18 - GPIO2[7] for EPD PWR CTL0 */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_EPDC_PWRCTRL0__GPIO_2_7); + + /*** Set pixel clock rates for EPDC ***/ + + /* EPDC AXI clk from PFD_400M, set to 396/2 = 198MHz */ + reg = readl(CCM_BASE_ADDR + CLKCTL_CHSCCDR); + reg &= ~0x3F000; + reg |= (0x4 << 15) | (1 << 12); + writel(reg, CCM_BASE_ADDR + CLKCTL_CHSCCDR); + + /* EPDC AXI clk enable */ + reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR3); + reg |= 0x0030; + writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3); + + /* EPDC PIX clk from PFD_540M, set to 540/4/5 = 27MHz */ + reg = readl(CCM_BASE_ADDR + CLKCTL_CSCDR2); + reg &= ~0x03F000; + reg |= (0x5 << 15) | (4 << 12); + writel(reg, CCM_BASE_ADDR + CLKCTL_CSCDR2); + + reg = readl(CCM_BASE_ADDR + CLKCTL_CBCMR); + reg &= ~0x03800000; + reg |= (0x3 << 23); + writel(reg, CCM_BASE_ADDR + CLKCTL_CBCMR); + + /* EPDC PIX clk enable */ + reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR3); + reg |= 0x0C00; + writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR3); + + panel_info.epdc_data.working_buf_addr = CONFIG_WORKING_BUF_ADDR; + panel_info.epdc_data.waveform_buf_addr = CONFIG_WAVEFORM_BUF_ADDR; + + panel_info.epdc_data.wv_modes.mode_init = 0; + panel_info.epdc_data.wv_modes.mode_du = 1; + panel_info.epdc_data.wv_modes.mode_gc4 = 3; + panel_info.epdc_data.wv_modes.mode_gc8 = 2; + panel_info.epdc_data.wv_modes.mode_gc16 = 2; + panel_info.epdc_data.wv_modes.mode_gc32 = 2; + + panel_info.epdc_data.epdc_timings = panel_timings; + + setup_epdc_power(); + + /* Assign fb_base */ + gd->fb_base = CONFIG_FB_BASE; +} +#endif + +/* For DDR mode operation, provide target delay parameter for each SD port. + * Use cfg->esdhc_base to distinguish the SD port #. The delay for each port + * is dependent on signal layout for that particular port. If the following + * CONFIG is not defined, then the default target delay value will be used. + */ +#ifdef CONFIG_GET_DDR_TARGET_DELAY +u32 get_ddr_delay(struct fsl_esdhc_cfg *cfg) +{ + /* No delay required on EVK board SD ports */ + return 0; +} +#endif +#endif + +#ifdef CONFIG_IMX_ECSPI +s32 spi_get_cfg(struct imx_spi_dev_t *dev) +{ + switch (dev->slave.cs) { + case 0: + /* SPI-NOR */ + dev->base = ECSPI1_BASE_ADDR; + dev->freq = 25000000; + dev->ss_pol = IMX_SPI_ACTIVE_LOW; + dev->ss = 0; + dev->fifo_sz = 64 * 4; + dev->us_delay = 0; + break; + default: + printf("Invalid Bus ID!\n"); + break; + } + + return 0; +} + +void spi_io_init(struct imx_spi_dev_t *dev) +{ + u32 reg; + + switch (dev->base) { + case ECSPI1_BASE_ADDR: + /* Enable clock */ + reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR1); + reg |= 0x3; + writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR1); + /* SCLK */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK); + + /* MISO */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO); + + /* MOSI */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI); + + if (dev->ss == 0) + mxc_iomux_v3_setup_pad + (MX6SL_PAD_ECSPI1_SS0__ECSPI1_SS0); + break; + case ECSPI2_BASE_ADDR: + case ECSPI3_BASE_ADDR: + /* ecspi2-3 fall through */ + break; + default: + break; + } +} +#endif + +#ifdef CONFIG_MXC_FEC +iomux_v3_cfg_t enet_pads[] = { + /* LAN8720A */ + MX6SL_PAD_FEC_MDIO__FEC_MDIO, + MX6SL_PAD_FEC_MDC__FEC_MDC, + MX6SL_PAD_FEC_RXD0__FEC_RDATA_0, + MX6SL_PAD_FEC_RXD1__FEC_RDATA_1, + MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV, + MX6SL_PAD_FEC_TXD0__FEC_TDATA_0, + MX6SL_PAD_FEC_TXD1__FEC_TDATA_1, + MX6SL_PAD_FEC_TX_EN__FEC_TX_EN, +#ifdef CONFIG_FEC_CLOCK_FROM_ANATOP + MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT, /* clock from anatop */ +#else + MX6SL_PAD_FEC_REF_CLK__GPIO_4_26, /* clock from OSC */ +#endif + + /* + * Since FEC_RX_ER is not connected with PHY(LAN8720A), we need + * either configure FEC_RX_ER PAD to other mode than FEC_RX_ER, + * or configure FEC_RX_ER PAD to FEC_RX_ER but need pull it down, + * otherwise, FEC MAC will report CRC error always. We configure + * FEC_RX_ER PAD to GPIO mode here. + */ + + MX6SL_PAD_FEC_RX_ER__GPIO_4_19, + MX6SL_PAD_FEC_TX_CLK__GPIO_4_21, /* Phy power enable */ +}; + +void enet_board_init(void) +{ + unsigned int reg; + mxc_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); + + /*set GPIO4_26 input as FEC clock */ + reg = readl(GPIO4_BASE_ADDR + 0x04); + reg &= ~(1 << 26); + writel(reg, GPIO4_BASE_ADDR + 0x4); + + /* phy power enable and reset: gpio4_21 */ + /* DR: High Level on: Power ON */ + reg = readl(GPIO4_BASE_ADDR + 0x0); + reg |= (1 << 21); + writel(reg, GPIO4_BASE_ADDR + 0x0); + + /* DIR: output */ + reg = readl(GPIO4_BASE_ADDR + 0x4); + reg |= (1 << 21); + writel(reg, GPIO4_BASE_ADDR + 0x4); + + /* wait RC ms for hw reset */ + udelay(500); +} + +#define ANATOP_PLL_LOCK 0x80000000 +#define ANATOP_PLL_PWDN_MASK 0x00001000 +#define ANATOP_PLL_BYPASS_MASK 0x00010000 +#define ANATOP_FEC_PLL_ENABLE_MASK 0x00002000 + +static int setup_fec(void) +{ + u32 reg = 0; + s32 timeout = 100000; + + /* get enet tx reference clk from internal clock from anatop + * GPR1[14] = 0, GPR1[18:17] = 00 + */ + reg = readl(IOMUXC_BASE_ADDR + 0x4); + reg &= ~(0x3 << 17); + reg &= ~(0x1 << 14); + writel(reg, IOMUXC_BASE_ADDR + 0x4); + +#ifdef CONFIG_FEC_CLOCK_FROM_ANATOP + /* Enable PLLs */ + reg = readl(ANATOP_BASE_ADDR + 0xe0); /* ENET PLL */ + if ((reg & ANATOP_PLL_PWDN_MASK) || (!(reg & ANATOP_PLL_LOCK))) { + reg &= ~ANATOP_PLL_PWDN_MASK; + writel(reg, ANATOP_BASE_ADDR + 0xe0); + while (timeout--) { + if (readl(ANATOP_BASE_ADDR + 0xe0) & ANATOP_PLL_LOCK) + break; + } + if (timeout <= 0) + return -1; + } + + /* Enable FEC clock */ + reg |= ANATOP_FEC_PLL_ENABLE_MASK; + reg &= ~ANATOP_PLL_BYPASS_MASK; + writel(reg, ANATOP_BASE_ADDR + 0xe0); +#endif + return 0; +} +#endif + +#ifdef CONFIG_I2C_MXC +#define I2C1_SCL_GPIO3_12_BIT_MASK (1 << 12) +#define I2C1_SDA_GPIO3_13_BIT_MASK (1 << 13) +#define I2C2_SCL_GPIO3_14_BIT_MASK (1 << 14) +#define I2C2_SDA_GPIO3_15_BIT_MASK (1 << 15) + +static void setup_i2c(unsigned int module_base) +{ + unsigned int reg; + + switch (module_base) { + case I2C1_BASE_ADDR: + /* i2c1 SDA */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_I2C1_SDA__I2C1_SDA); + /* i2c1 SCL */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_I2C1_SCL__I2C1_SCL); + + /* Enable i2c clock */ + reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR2); + reg |= 0xC0; + writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR2); + + break; + case I2C2_BASE_ADDR: + /* i2c2 SDA */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_I2C2_SDA__I2C2_SDA); + + /* i2c2 SCL */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_I2C2_SCL__I2C2_SCL); + + /* Enable i2c clock */ + reg = readl(CCM_BASE_ADDR + CLKCTL_CCGR2); + reg |= 0x300; + writel(reg, CCM_BASE_ADDR + CLKCTL_CCGR2); + + break; + default: + printf("Invalid I2C base: 0x%x\n", module_base); + break; + } +} + +/* Note: udelay() is not accurate for i2c timing */ +static void __udelay(int time) +{ + int i, j; + + for (i = 0; i < time; i++) { + for (j = 0; j < 200; j++) { + asm("nop"); + asm("nop"); + } + } +} + +static void mx6sl_i2c_gpio_scl_direction(int bus, int output) +{ + u32 reg; + + switch (bus) { + case 1: + mxc_iomux_v3_setup_pad(MX6SL_PAD_I2C1_SCL__GPIO_3_12); + reg = readl(GPIO3_BASE_ADDR + GPIO_GDIR); + if (output) + reg |= I2C1_SCL_GPIO3_12_BIT_MASK; + else + reg &= ~I2C1_SCL_GPIO3_12_BIT_MASK; + writel(reg, GPIO3_BASE_ADDR + GPIO_GDIR); + break; + case 2: + mxc_iomux_v3_setup_pad(MX6SL_PAD_I2C2_SCL__GPIO_3_14); + reg = readl(GPIO3_BASE_ADDR + GPIO_GDIR); + if (output) + reg |= I2C2_SCL_GPIO3_14_BIT_MASK; + else + reg &= ~I2C2_SCL_GPIO3_14_BIT_MASK; + writel(reg, GPIO3_BASE_ADDR + GPIO_GDIR); + break; + } +} + +/* set 1 to output, sent 0 to input */ +static void mx6sl_i2c_gpio_sda_direction(int bus, int output) +{ + u32 reg; + + switch (bus) { + case 1: + mxc_iomux_v3_setup_pad(MX6SL_PAD_I2C1_SDA__GPIO_3_13); + reg = readl(GPIO3_BASE_ADDR + GPIO_GDIR); + if (output) + reg |= I2C1_SDA_GPIO3_13_BIT_MASK; + else + reg &= ~I2C1_SDA_GPIO3_13_BIT_MASK; + writel(reg, GPIO3_BASE_ADDR + GPIO_GDIR); + break; + case 2: + mxc_iomux_v3_setup_pad(MX6SL_PAD_I2C2_SDA__GPIO_3_15); + reg = readl(GPIO3_BASE_ADDR + GPIO_GDIR); + if (output) + reg |= I2C2_SDA_GPIO3_15_BIT_MASK; + else + reg &= ~I2C2_SDA_GPIO3_15_BIT_MASK; + writel(reg, GPIO3_BASE_ADDR + GPIO_GDIR); + break; + } +} + +/* set 1 to high 0 to low */ +static void mx6sl_i2c_gpio_scl_set_level(int bus, int high) +{ + u32 reg; + + switch (bus) { + case 1: + reg = readl(GPIO3_BASE_ADDR + GPIO_DR); + if (high) + reg |= I2C1_SCL_GPIO3_12_BIT_MASK; + else + reg &= ~I2C1_SCL_GPIO3_12_BIT_MASK; + writel(reg, GPIO3_BASE_ADDR + GPIO_DR); + break; + case 2: + reg = readl(GPIO3_BASE_ADDR + GPIO_DR); + if (high) + reg |= I2C2_SCL_GPIO3_14_BIT_MASK; + else + reg &= ~I2C2_SCL_GPIO3_14_BIT_MASK; + writel(reg, GPIO3_BASE_ADDR + GPIO_DR); + break; + } +} + +/* set 1 to high 0 to low */ +static void mx6sl_i2c_gpio_sda_set_level(int bus, int high) +{ + u32 reg; + + switch (bus) { + case 1: + reg = readl(GPIO3_BASE_ADDR + GPIO_DR); + if (high) + reg |= I2C1_SDA_GPIO3_13_BIT_MASK; + else + reg &= ~I2C1_SDA_GPIO3_13_BIT_MASK; + writel(reg, GPIO3_BASE_ADDR + GPIO_DR); + break; + case 2: + reg = readl(GPIO3_BASE_ADDR + GPIO_DR); + if (high) + reg |= I2C2_SDA_GPIO3_15_BIT_MASK; + else + reg &= ~I2C2_SDA_GPIO3_15_BIT_MASK; + writel(reg, GPIO3_BASE_ADDR + GPIO_DR); + break; + } +} + +static int mx6sl_i2c_gpio_check_sda(int bus) +{ + u32 reg; + int result = 0; + + switch (bus) { + case 1: + reg = readl(GPIO3_BASE_ADDR + GPIO_PSR); + result = !!(reg & I2C1_SDA_GPIO3_13_BIT_MASK); + break; + case 2: + reg = readl(GPIO3_BASE_ADDR + GPIO_PSR); + result = !!(reg & I2C2_SDA_GPIO3_15_BIT_MASK); + break; + } + + return result; +} + + /* Random reboot cause i2c SDA low issue: + * the i2c bus busy because some device pull down the I2C SDA + * line. This happens when Host is reading some byte from slave, and + * then host is reset/reboot. Since in this case, device is + * controlling i2c SDA line, the only thing host can do this give the + * clock on SCL and sending NAK, and STOP to finish this + * transaction. + * + * How to fix this issue: + * detect if the SDA was low on bus send 8 dummy clock, and 1 + * clock + NAK, and STOP to finish i2c transaction the pending + * transfer. + */ +int i2c_bus_recovery(void) +{ + int i, bus, result = 0; + + for (bus = 1; bus <= 2; bus++) { + mx6sl_i2c_gpio_sda_direction(bus, 0); + + if (mx6sl_i2c_gpio_check_sda(bus) == 0) { + printf("i2c: I2C%d SDA is low, start i2c recovery...\n", + bus); + mx6sl_i2c_gpio_scl_direction(bus, 1); + mx6sl_i2c_gpio_scl_set_level(bus, 1); + __udelay(10000); + + for (i = 0; i < 9; i++) { + mx6sl_i2c_gpio_scl_set_level(bus, 1); + __udelay(5); + mx6sl_i2c_gpio_scl_set_level(bus, 0); + __udelay(5); + } + + /* 9th clock here, the slave should already + release the SDA, we can set SDA as high to + a NAK. */ + mx6sl_i2c_gpio_sda_direction(bus, 1); + mx6sl_i2c_gpio_sda_set_level(bus, 1); + __udelay(1); /* Pull up SDA first */ + mx6sl_i2c_gpio_scl_set_level(bus, 1); + __udelay(5); /* plus pervious 1 us */ + mx6sl_i2c_gpio_scl_set_level(bus, 0); + __udelay(5); + mx6sl_i2c_gpio_sda_set_level(bus, 0); + __udelay(5); + mx6sl_i2c_gpio_scl_set_level(bus, 1); + __udelay(5); + /* Here: SCL is high, and SDA from low to high, it's a + * stop condition */ + mx6sl_i2c_gpio_sda_set_level(bus, 1); + __udelay(5); + + mx6sl_i2c_gpio_sda_direction(bus, 0); + if (mx6sl_i2c_gpio_check_sda(bus) == 1) + printf("I2C%d Recovery success\n", bus); + else { + printf + ("I2C%d Recovery failed, I2C1 SDA still low!!!\n", + bus); + result |= 1 << bus; + } + } + /* configure back to i2c */ + switch (bus) { + case 1: + setup_i2c(I2C1_BASE_ADDR); + break; + case 2: + setup_i2c(I2C2_BASE_ADDR); + break; + } + } + + return result; +} + +void setup_pmic_voltages(void) +{ + unsigned char value = 0; +#if CONFIG_MX6_INTER_LDO_BYPASS + unsigned int val = 0; +#endif + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + if (!i2c_probe(0x8)) { + if (i2c_read(0x8, 0, 1, &value, 1)) + printf("%s:i2c_read:error\n", __func__); + printf("Found PFUZE100! device id=%x\n", value); +#if CONFIG_MX6_INTER_LDO_BYPASS + /*VDDCORE 1.1V@800Mhz: SW1AB */ + value = 0x20; + i2c_write(0x8, 0x20, 1, &value, 1); + + /*VDDSOC 1.2V : SW1C */ + value = 0x24; + i2c_write(0x8, 0x2e, 1, &value, 1); + + /* Bypass the VDDSOC from Anatop */ + val = REG_RD(ANATOP_BASE_ADDR, HW_ANADIG_REG_CORE); + val &= ~BM_ANADIG_REG_CORE_REG2_TRG; + val |= BF_ANADIG_REG_CORE_REG2_TRG(0x1f); + REG_WR(ANATOP_BASE_ADDR, HW_ANADIG_REG_CORE, val); + + /* Bypass the VDDCORE from Anatop */ + val = REG_RD(ANATOP_BASE_ADDR, HW_ANADIG_REG_CORE); + val &= ~BM_ANADIG_REG_CORE_REG0_TRG; + val |= BF_ANADIG_REG_CORE_REG0_TRG(0x1f); + REG_WR(ANATOP_BASE_ADDR, HW_ANADIG_REG_CORE, val); + + /* Bypass the VDDPU from Anatop */ + val = REG_RD(ANATOP_BASE_ADDR, HW_ANADIG_REG_CORE); + val &= ~BM_ANADIG_REG_CORE_REG1_TRG; + val |= BF_ANADIG_REG_CORE_REG1_TRG(0x1f); + REG_WR(ANATOP_BASE_ADDR, HW_ANADIG_REG_CORE, val); + + /*clear PowerDown Enable bit of WDOG1_WMCR */ + writew(0, WDOG1_BASE_ADDR + 0x08); + printf("hw_anadig_reg_core=%x\n", + REG_RD(ANATOP_BASE_ADDR, HW_ANADIG_REG_CORE)); +#endif + + } +} +#endif + +int board_init(void) +{ + mxc_iomux_v3_init((void *)IOMUXC_BASE_ADDR); + setup_boot_device(); + + /* board id for linux */ + gd->bd->bi_arch_number = MACH_TYPE_MX6SL_EVK; + + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + setup_uart(); + +#ifdef CONFIG_MXC_FEC + setup_fec(); +#endif + +#ifdef CONFIG_MXC_EPDC + setup_epdc(); +#endif + return 0; +} + +int board_late_init(void) +{ +#ifdef CONFIG_I2C_MXC + setup_i2c(CONFIG_SYS_I2C_PORT); + i2c_bus_recovery(); + setup_pmic_voltages(); +#endif + return 0; +} + +int checkboard(void) +{ + printf("Board: MX6SoloLite-EVK:[ "); + + switch (__REG(SRC_BASE_ADDR + 0x8)) { + case 0x0001: + printf("POR"); + break; + case 0x0009: + printf("RST"); + break; + case 0x0010: + case 0x0011: + printf("WDOG"); + break; + default: + printf("unknown"); + } + printf(" ]\n"); + + printf("Boot Device: "); + switch (get_boot_device()) { + case WEIM_NOR_BOOT: + printf("NOR\n"); + break; + case ONE_NAND_BOOT: + printf("ONE NAND\n"); + break; + case I2C_BOOT: + printf("I2C\n"); + break; + case SPI_NOR_BOOT: + printf("SPI NOR\n"); + break; + case SD_BOOT: + printf("SD\n"); + break; + case MMC_BOOT: + printf("MMC\n"); + break; + case UNKNOWN_BOOT: + default: + printf("UNKNOWN\n"); + break; + } + +#ifdef CONFIG_SECURE_BOOT + if (check_hab_enable() == 1) + get_hab_status(); +#endif + + return 0; +} + +#ifdef CONFIG_ANDROID_RECOVERY +int check_recovery_cmd_file(void) +{ + return check_and_clean_recovery_flag(); +} +#endif + +#ifdef CONFIG_IMX_UDC +void udc_pins_setting(void) +{ + /* USB_OTG_PWR */ + mxc_iomux_v3_setup_pad(MX6SL_PAD_KEY_COL4__GPIO_4_0); + mxc_iomux_v3_setup_pad(MX6SL_PAD_KEY_COL5__GPIO_4_2); + /* USB_OTG_PWR = 0 */ + gpio_direction_output(USB_OTG_PWR, 0); + /* USB_H1_POWER = 1 */ + gpio_direction_output(USB_H1_PWR, 1); +} +#endif diff --git a/board/freescale/mx6sl_evk/u-boot.lds b/board/freescale/mx6sl_evk/u-boot.lds new file mode 100644 index 0000000..f71e93d --- /dev/null +++ b/board/freescale/mx6sl_evk/u-boot.lds @@ -0,0 +1,82 @@ +/* + * January 2004 - Changed to support H4 device + * Copyright (c) 2004 Texas Instruments + * + * (C) Copyright 2002 + * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> + * + * (C) Copyright 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN(4); + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + board/freescale/mx6sl_evk/flash_header.o (.text.flasheader) + cpu/arm_cortexa8/start.o + board/freescale/mx6sl_evk/libmx6sl_evk.a (.text) + lib_arm/libarm.a (.text) + net/libnet.a (.text) + drivers/mtd/libmtd.a (.text) + drivers/mmc/libmmc.a (.text) + + . = DEFINED(env_offset) ? env_offset : .; + common/env_embedded.o(.text) + + *(.text) + } + + . = ALIGN(4); + .rodata : { *(.rodata) } + + . = ALIGN(4); + .data : { *(.data) } + + . = ALIGN(4); + .got : { *(.got) } + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = ALIGN(4); + _end_of_copy = .; /* end_of ROM copy code when HAB is not enabled */ + + /* Extend to align to 0x1000, then put the Hab Data */ + . = ALIGN(0x1000); + __hab_data = .; + . = . + 0x2000; + __hab_data_end = .; + /* End of Hab Data, Place it before BSS section */ + + __bss_start = .; + .bss : { *(.bss) } + _end = .; +} diff --git a/include/asm-arm/mach-types.h b/include/asm-arm/mach-types.h index 64ffb5a..2630bac 100644 --- a/include/asm-arm/mach-types.h +++ b/include/asm-arm/mach-types.h @@ -3259,6 +3259,7 @@ extern unsigned int __machine_arch_type; #define MACH_TYPE_MX6Q_ARM2 3837 #define MACH_TYPE_MX6Q_SABRESD 3980 #define MACH_TYPE_MX6SL_ARM2 4091 +#define MACH_TYPE_MX6SL_EVK 4307 #ifdef CONFIG_ARCH_EBSA110 # ifdef machine_arch_type @@ -42200,6 +42201,18 @@ extern unsigned int __machine_arch_type; # define machine_is_mx6q_sabresd() (0) #endif +#ifdef CONFIG_MACH_MX6SL_EVK +# ifdef machine_arch_type +# undef machine_arch_type +# define machine_arch_type __machine_arch_type +# else +# define machine_arch_type MACH_TYPE_MX6SL_EVK +# endif +# define machine_is_mx6sl_evk() (machine_arch_type == MACH_TYPE_MX6SL_EVK) +#else +# define machine_is_mx6sl_evk() (0) +#endif + /* * These have not yet been registered */ diff --git a/include/configs/mx6sl_evk.h b/include/configs/mx6sl_evk.h new file mode 100644 index 0000000..8864a7f --- /dev/null +++ b/include/configs/mx6sl_evk.h @@ -0,0 +1,317 @@ +/* + * Copyright (C) 2010-2012 Freescale Semiconductor, Inc. + * + * Configuration settings for the MX6Q Armadillo2 Freescale board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + /* High Level Configuration Options */ +#define CONFIG_ARMV7 /* This is armv7 Cortex-A9 CPU core */ +#define CONFIG_MXC +#define CONFIG_MX6SL +#define CONFIG_MX6SL_EVK +#define CONFIG_FLASH_HEADER +#define CONFIG_FLASH_HEADER_OFFSET 0x400 +#define CONFIG_MX6_CLK32 32768 + +/* + * #define CONFIG_SECURE_BOOT + * Enable Secure Boot. DO NOT TURN ON IT until you know what you are doing + */ + +#include <asm/arch/mx6.h> + +#define CONFIG_SKIP_RELOCATE_UBOOT + +#define CONFIG_ARCH_CPU_INIT +#undef CONFIG_ARCH_MMU /* disable MMU first */ +#define CONFIG_L2_OFF /* disable L2 cache first*/ + +/* + * #define CONFIG_FLASH_PLUG_IN + */ + +#define CONFIG_MX6_HCLK_FREQ 24000000 + +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_SYS_64BIT_VSPRINTF + +#define BOARD_LATE_INIT + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024) +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Hardware drivers + */ +#define CONFIG_MXC_UART +#define CONFIG_UART_BASE_ADDR UART1_IPS_BASE_ADDR + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_NET_RETRY_COUNT 100 +#define CONFIG_NET_MULTI 1 +#define CONFIG_BOOTP_SUBNETMASK +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_DNS + +#define CONFIG_CMD_SPI +#define CONFIG_CMD_I2C +#define CONFIG_CMD_IMXOTP + +/* Enable below configure when supporting nand */ +#define CONFIG_CMD_SF +#define CONFIG_CMD_MMC +#define CONFIG_CMD_ENV + +#define CONFIG_CMD_CLOCK +#define CONFIG_REF_CLK_FREQ CONFIG_MX6_HCLK_FREQ + +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_IMX_DOWNLOAD_MODE + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_PRIME "FEC0" + +#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ +#define CONFIG_RD_LOADADDR 0x81000000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "ethprime=FEC0\0" \ + "uboot=u-boot.bin\0" \ + "kernel=uImage\0" \ + "nfsroot=/opt/eldk/arm\0" \ + "bootargs_base=setenv bootargs console=ttymxc0,115200\0"\ + "bootargs_nfs=setenv bootargs ${bootargs} root=/dev/nfs "\ + "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0"\ + "bootcmd_net=run bootargs_base bootargs_nfs; " \ + "tftpboot ${loadaddr} ${kernel}; bootm\0" \ + "bootargs_mmc=setenv bootargs ${bootargs} ip=dhcp " \ + "root=/dev/mmcblk0p1 rootwait\0" \ + "bootcmd_mmc=run bootargs_base bootargs_mmc; " \ + "mmc dev 1; " \ + "mmc read ${loadaddr} 0x800 0x2000; bootm\0" \ + "bootcmd=run bootcmd_net\0" \ + + +#define CONFIG_ARP_TIMEOUT 200UL + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_PROMPT "MX6Sl EVK U-Boot > " +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x80010000 + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING + +#define CONFIG_FEC_CLOCK_FROM_ANATOP +#define CONFIG_FEC0_IOBASE ENET_BASE_ADDR +#define CONFIG_FEC0_PINMUX -1 +#define CONFIG_FEC0_MIIBASE -1 +#define CONFIG_GET_FEC_MAC_ADDR_FROM_IIM +#define CONFIG_MXC_FEC +#define CONFIG_MII_GASKET +#define CONFIG_FEC0_PHY_ADDR 0 +#define CONFIG_ETH_PRIME +#define CONFIG_MII +#define CONFIG_IPADDR 192.168.1.103 +#define CONFIG_SERVERIP 192.168.1.101 +#define CONFIG_NETMASK 255.255.255.0 +#define CONFIG_MXC_GPIO + +/* + * OCOTP Configs + */ +#ifdef CONFIG_CMD_IMXOTP + #define CONFIG_IMX_OTP + #define IMX_OTP_BASE OCOTP_BASE_ADDR + #define IMX_OTP_ADDR_MAX 0x7F + #define IMX_OTP_DATA_ERROR_VAL 0xBADABADA +#endif + +/* + * SPI Configs + */ +#ifdef CONFIG_CMD_SF + #define CONFIG_FSL_SF 1 + #define CONFIG_SPI_FLASH_IMX_M25PXX 1 + #define CONFIG_SPI_FLASH_CS 0 + #define CONFIG_IMX_ECSPI + #define IMX_CSPI_VER_2_3 1 + #define MAX_SPI_BYTES (64 * 4) +#endif + +/* + * MMC Configs + */ +#ifdef CONFIG_CMD_MMC + #define CONFIG_MMC + #define CONFIG_GENERIC_MMC + #define CONFIG_IMX_MMC + #define CONFIG_SYS_FSL_USDHC_NUM 3 + #define CONFIG_SYS_FSL_ESDHC_ADDR 0 + #define CONFIG_SYS_MMC_ENV_DEV 1 + #define CONFIG_DOS_PARTITION 1 + #define CONFIG_CMD_FAT 1 + #define CONFIG_CMD_EXT2 1 + + /* detect whether SD1, 2, or 3 is boot device */ + #define CONFIG_DYNAMIC_MMC_DEVNO + + /* SD2 is 8 bit */ + #define CONFIG_MMC_8BIT_PORTS 0x2 + /* Setup target delay in DDR mode for each SD port */ + #define CONFIG_GET_DDR_TARGET_DELAY +#endif + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_DDR_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) +#define iomem_valid_addr(addr, size) \ + (addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)) + +/*----------------------------------------------------------------------- + * IRAM Memory Map + */ +#define IRAM_FREE_START 0x00907000 + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH + +/* Monitor at beginning of flash */ +#define CONFIG_FSL_ENV_IN_MMC +/* #define CONFIG_FSL_ENV_IN_NAND */ +/* #define CONFIG_FSL_ENV_IN_SATA */ + +#define CONFIG_ENV_SECT_SIZE (8 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE + +#if defined(CONFIG_FSL_ENV_IN_MMC) + #define CONFIG_ENV_IS_IN_MMC 1 + #define CONFIG_ENV_OFFSET (768 * 1024) +#elif defined(CONFIG_FSL_ENV_IN_SF) + #define CONFIG_ENV_IS_IN_SPI_FLASH 1 + #define CONFIG_ENV_SPI_CS 1 + #define CONFIG_ENV_OFFSET (768 * 1024) +#else + #define CONFIG_ENV_IS_NOWHERE 1 +#endif + +/* + * I2C Configs + */ +#ifdef CONFIG_CMD_I2C + #define CONFIG_HARD_I2C 1 + #define CONFIG_I2C_MXC 1 + #define CONFIG_SYS_I2C_PORT I2C1_BASE_ADDR + #define CONFIG_SYS_I2C_SPEED 100000 + #define CONFIG_SYS_I2C_SLAVE 0x8 +#endif + +#define CONFIG_MX6_INTER_LDO_BYPASS 1 + +/*#define CONFIG_SPLASH_SCREEN*/ + +/* + * SPLASH SCREEN Configs + */ +#ifdef CONFIG_SPLASH_SCREEN + /* + * Framebuffer and LCD + */ + #define CONFIG_MXC_EPDC 1 + #define CONFIG_LCD + #define CONFIG_FB_BASE (TEXT_BASE + 0x300000) + #define CONFIG_SYS_CONSOLE_IS_IN_ENV +#ifdef CONFIG_MXC_EPDC + #undef LCD_TEST_PATTERN + /* #define CONFIG_SPLASH_IS_IN_MMC 1 */ + #define LCD_BPP LCD_MONOCHROME + /* #define CONFIG_SPLASH_SCREEN_ALIGN 1 */ + + #define CONFIG_WORKING_BUF_ADDR (TEXT_BASE + 0x100000) + #define CONFIG_WAVEFORM_BUF_ADDR (TEXT_BASE + 0x200000) + #define CONFIG_WAVEFORM_FILE_OFFSET 0x600000 + #define CONFIG_WAVEFORM_FILE_SIZE 0xF0A00 + #define CONFIG_WAVEFORM_FILE_IN_MMC + +#ifdef CONFIG_SPLASH_IS_IN_MMC + #define CONFIG_SPLASH_IMG_OFFSET 0x4c000 + #define CONFIG_SPLASH_IMG_SIZE 0x19000 +#endif +#endif +#endif /* CONFIG_SPLASH_SCREEN */ + +#endif /* __CONFIG_H */ diff --git a/include/configs/mx6sl_evk_iram.h b/include/configs/mx6sl_evk_iram.h new file mode 100644 index 0000000..6b14434 --- /dev/null +++ b/include/configs/mx6sl_evk_iram.h @@ -0,0 +1,155 @@ +/* + * Copyright (C) 2010-2012 Freescale Semiconductor, Inc. + * + * Configuration settings for the MX6SL Armadillo2 Freescale board. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + + /* High Level Configuration Options */ +#define CONFIG_ARMV7 /* This is armv7 Cortex-A9 CPU core */ +#define CONFIG_MXC +#define CONFIG_MX6SL +#define CONFIG_MX6SL_EVK +#define CONFIG_FLASH_HEADER +#define CONFIG_FLASH_HEADER_OFFSET 0x400 +#define CONFIG_MX6_CLK32 32768 + +#include <asm/arch/mx6.h> + +#define CONFIG_SKIP_RELOCATE_UBOOT +#define CONFIG_L2_OFF /* disable L2 cache first*/ + +/* +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_ARCH_MMU +*/ + +#define CONFIG_MX6_HCLK_FREQ 24000000 +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define BOARD_LATE_INIT + +#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ +#define CONFIG_REVISION_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG + +/* + * Size of malloc() pool + */ +#define CONFIG_SYS_MALLOC_LEN (10 * 1024) +/* size in bytes reserved for initial data */ +#define CONFIG_SYS_GBL_DATA_SIZE 128 + +/* + * Hardware drivers + */ +#define CONFIG_MXC_UART +#define CONFIG_UART_BASE_ADDR UART1_IPS_BASE_ADDR + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 +#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200} + +/*********************************************************** + * Command definition + ***********************************************************/ + +#define CONFIG_CMD_BDI /* bdinfo */ +#define CONFIG_CMD_BOOTD /* bootd */ +#define CONFIG_CMD_CONSOLE /* coninfo */ +#define CONFIG_CMD_RUN /* run command in env variable */ + +/* Enable below configure when supporting nand */ +#define CONFIG_CMD_ENV + +#define CONFIG_REF_CLK_FREQ CONFIG_MX6_HCLK_FREQ + +#undef CONFIG_CMD_IMLS + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_PRIME "FEC0" + +#define CONFIG_LOADADDR 0x80800000 /* loadaddr env var */ +#define CONFIG_RD_LOADADDR (CONFIG_LOADADDR + 0x300000) + +#define CONFIG_BOOTARGS "console=ttymxc0,115200 "\ + "rdinit=/linuxrc" + +#define CONFIG_BOOTCOMMAND "bootm" +#define CONFIG_ENV_IS_EMBEDDED +#define CONFIG_ARP_TIMEOUT 200UL + +/* + * Miscellaneous configurable options + */ +#define CONFIG_SYS_PROMPT "MX6SL EVK IRAM U-Boot > " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ + +#define CONFIG_SYS_MEMTEST_START 0x80000000 /* memtest works on */ +#define CONFIG_SYS_MEMTEST_END 0x80100000 + +#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */ + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR + +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING + +/*----------------------------------------------------------------------- + * Stack sizes + * + * The stack sizes are set up in start.S using the settings below + */ +#define CONFIG_STACKSIZE (6 * 1024) /* regular stack */ + +/*----------------------------------------------------------------------- + * Physical Memory Map + */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM_1 CSD0_DDR_BASE_ADDR +#define PHYS_SDRAM_1_SIZE (512 * 1024 * 1024) +#define iomem_valid_addr(addr, size) \ + (addr >= PHYS_SDRAM_1 && addr <= (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)) + +/*----------------------------------------------------------------------- + * FLASH and environment organization + */ +#define CONFIG_SYS_NO_FLASH + +/* Monitor at beginning of flash */ +/* #define CONFIG_FSL_ENV_IN_SF +*/ +/* #define CONFIG_FSL_ENV_IN_MMC */ + +#define CONFIG_ENV_SECT_SIZE (1 * 1024) +#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE +#define CONFIG_ENV_IS_NOWHERE + +#endif /* __CONFIG_H */ |