diff options
| -rw-r--r-- | CHANGELOG | 2 | ||||
| -rw-r--r-- | include/configs/inka4x0.h | 12 |
2 files changed, 5 insertions, 9 deletions
@@ -2,6 +2,8 @@ Changes for U-Boot 1.1.3: ====================================================================== +* Fix INKA4x0: use CS1 as gpio_wkup_6 output + * Fix bug in the SDRAM initialization code for canmb, IceCube and PM520 boards. Fix PHY address for canmb board. diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h index 82a3842..5cbb0c3 100644 --- a/include/configs/inka4x0.h +++ b/include/configs/inka4x0.h @@ -197,8 +197,8 @@ /* * GPIO configuration * - * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1): - * Bit 0 (mask: 0x80000000): 1 + * use CS1 as gpio_wkup_6 output + * Bit 0 (mask: 0x80000000): 0 * use ALT CAN position: Bits 2-3 (mask: 0x30000000): * 00 -> No Alternatives, I2C1 is used for onboard EEPROM * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard @@ -206,14 +206,8 @@ * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 * use PSC6_1 and PSC6_3 as GPIO: Bits 9:11 (mask: 0x07000000): * 011 -> PSC6 could not be used as UART or CODEC. IrDA still possible. - * GPIO on PSC6_3 is used in post_hotkeys_pressed() to enable extended POST - * tests. */ -#if defined (CONFIG_MINIFAP) -#define CFG_GPS_PORT_CONFIG 0x93000004 -#else -#define CFG_GPS_PORT_CONFIG 0x81001004 -#endif +#define CFG_GPS_PORT_CONFIG 0x01001004 /* * RTC configuration |