diff options
| -rw-r--r-- | board/davinci/dv-evm/dv_board.c | 9 | ||||
| -rw-r--r-- | board/davinci/schmoogie/dv_board.c | 9 | ||||
| -rw-r--r-- | board/davinci/sffsdr/sffsdr.c | 6 | ||||
| -rw-r--r-- | board/davinci/sonata/dv_board.c | 9 | ||||
| -rw-r--r-- | board/freescale/mpc8544ds/law.c | 2 | ||||
| -rw-r--r-- | board/freescale/mpc8544ds/mpc8544ds.c | 5 | ||||
| -rw-r--r-- | board/freescale/mpc8544ds/tlb.c | 12 | ||||
| -rw-r--r-- | board/freescale/mpc8544ds/u-boot.lds | 1 | ||||
| -rw-r--r-- | board/sbc8560/sbc8560.c | 32 | ||||
| -rw-r--r-- | common/fdt_support.c | 87 | ||||
| -rw-r--r-- | cpu/arm926ejs/davinci/ether.c | 2 | ||||
| -rw-r--r-- | cpu/mpc83xx/fdt.c | 20 | ||||
| -rw-r--r-- | cpu/mpc85xx/cpu.c | 2 | ||||
| -rw-r--r-- | cpu/mpc85xx/cpu_init.c | 47 | ||||
| -rw-r--r-- | cpu/mpc85xx/fdt.c | 7 | ||||
| -rw-r--r-- | cpu/mpc85xx/start.S | 9 | ||||
| -rw-r--r-- | cpu/mpc86xx/fdt.c | 2 | ||||
| -rw-r--r-- | drivers/pci/pci_sh4.c | 12 | ||||
| -rw-r--r-- | include/asm-ppc/processor.h | 29 | ||||
| -rw-r--r-- | include/configs/MPC8544DS.h | 52 | ||||
| -rw-r--r-- | include/configs/MPC8560ADS.h | 38 | ||||
| -rw-r--r-- | include/configs/sbc8560.h | 128 | ||||
| -rw-r--r-- | include/fdt_support.h | 6 | ||||
| -rw-r--r-- | include/mpc83xx.h | 7 |
24 files changed, 384 insertions, 149 deletions
diff --git a/board/davinci/dv-evm/dv_board.c b/board/davinci/dv-evm/dv_board.c index 88b1e57..834eb68 100644 --- a/board/davinci/dv-evm/dv_board.c +++ b/board/davinci/dv-evm/dv_board.c @@ -29,14 +29,10 @@ #include <asm/arch/hardware.h> #include <asm/arch/emac_defs.h> -#define MACH_TYPE_DAVINCI_EVM 901 - DECLARE_GLOBAL_DATA_PTR; -extern void i2c_init(int speed, int slaveaddr); extern void timer_init(void); extern int eth_hw_init(void); -extern phy_t phy; /* Works on Always On power domain only (no PD argument) */ @@ -187,11 +183,8 @@ int misc_init_r (void) } } - if (!eth_hw_init()) { + if (!eth_hw_init()) printf("ethernet init failed!\n"); - } else { - printf("ETH PHY : %s\n", phy.name); - } i2c_read (0x39, 0x00, 1, (u_int8_t *)&i, 1); diff --git a/board/davinci/schmoogie/dv_board.c b/board/davinci/schmoogie/dv_board.c index 13d2195..3017546 100644 --- a/board/davinci/schmoogie/dv_board.c +++ b/board/davinci/schmoogie/dv_board.c @@ -29,14 +29,10 @@ #include <asm/arch/hardware.h> #include <asm/arch/emac_defs.h> -#define MACH_TYPE_SCHMOOGIE 1255 - DECLARE_GLOBAL_DATA_PTR; -extern void i2c_init(int speed, int slaveaddr); extern void timer_init(void); extern int eth_hw_init(void); -extern phy_t phy; /* Works on Always On power domain only (no PD argument) */ @@ -233,11 +229,8 @@ int misc_init_r (void) forceenv("serial#", (char *)&tmp[0]); } - if (!eth_hw_init()) { + if (!eth_hw_init()) printf("ethernet init failed!\n"); - } else { - printf("ETH PHY : %s\n", phy.name); - } return(0); } diff --git a/board/davinci/sffsdr/sffsdr.c b/board/davinci/sffsdr/sffsdr.c index b73484a..f41081f 100644 --- a/board/davinci/sffsdr/sffsdr.c +++ b/board/davinci/sffsdr/sffsdr.c @@ -43,7 +43,6 @@ DECLARE_GLOBAL_DATA_PTR; extern void timer_init(void); extern int eth_hw_init(void); -extern phy_t phy; /* Works on Always On power domain only (no PD argument) */ @@ -288,11 +287,8 @@ int misc_init_r(void) } } - if (!eth_hw_init()) { + if (!eth_hw_init()) printf("Ethernet init failed\n"); - } else { - printf("ETH PHY: %s\n", phy.name); - } /* On this platform, U-Boot is copied in RAM by the UBL, * so we are always in the relocated state. */ diff --git a/board/davinci/sonata/dv_board.c b/board/davinci/sonata/dv_board.c index e8665e5..a6f9bc7 100644 --- a/board/davinci/sonata/dv_board.c +++ b/board/davinci/sonata/dv_board.c @@ -29,14 +29,10 @@ #include <asm/arch/hardware.h> #include <asm/arch/emac_defs.h> -#define MACH_TYPE_SONATA 1254 - DECLARE_GLOBAL_DATA_PTR; -extern void i2c_init(int speed, int slaveaddr); extern void timer_init(void); extern int eth_hw_init(void); -extern phy_t phy; /* Works on Always On power domain only (no PD argument) */ @@ -188,11 +184,8 @@ int misc_init_r (void) } } - if (!eth_hw_init()) { + if (!eth_hw_init()) printf("ethernet init failed!\n"); - } else { - printf("ETH PHY : %s\n", phy.name); - } return(0); } diff --git a/board/freescale/mpc8544ds/law.c b/board/freescale/mpc8544ds/law.c index a82dede..54cf36b 100644 --- a/board/freescale/mpc8544ds/law.c +++ b/board/freescale/mpc8544ds/law.c @@ -30,7 +30,7 @@ struct law_entry law_table[] = { SET_LAW(CFG_PCI1_MEM_PHYS, LAW_SIZE_512M, LAW_TRGT_IF_PCI), SET_LAW(CFG_PCI1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCI), - SET_LAW(CFG_LBC_CACHE_BASE, LAWAR_SIZE_256M, LAW_TRGT_IF_LBC), + SET_LAW(CFG_LBC_NONCACHE_BASE, LAWAR_SIZE_128M, LAW_TRGT_IF_LBC), SET_LAW(CFG_PCIE1_MEM_PHYS, LAWAR_SIZE_256M, LAW_TRGT_IF_PCIE_1), SET_LAW(CFG_PCIE1_IO_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_PCIE_1), SET_LAW(CFG_PCIE2_MEM_PHYS, LAWAR_SIZE_512M, LAW_TRGT_IF_PCIE_2), diff --git a/board/freescale/mpc8544ds/mpc8544ds.c b/board/freescale/mpc8544ds/mpc8544ds.c index 8c4b040..c39ce11 100644 --- a/board/freescale/mpc8544ds/mpc8544ds.c +++ b/board/freescale/mpc8544ds/mpc8544ds.c @@ -49,7 +49,10 @@ int checkboard (void) if ((uint)&gur->porpllsr != 0xe00e0000) { printf("immap size error %lx\n",(ulong)&gur->porpllsr); } - printf ("Board: MPC8544DS\n"); + printf ("Board: MPC8544DS, System ID: 0x%02x, " + "System Version: 0x%02x, FPGA Version: 0x%02x\n", + in8(PIXIS_BASE + PIXIS_ID), in8(PIXIS_BASE + PIXIS_VER), + in8(PIXIS_BASE + PIXIS_PVER)); lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */ lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */ diff --git a/board/freescale/mpc8544ds/tlb.c b/board/freescale/mpc8544ds/tlb.c index 61fc609..40e0499 100644 --- a/board/freescale/mpc8544ds/tlb.c +++ b/board/freescale/mpc8544ds/tlb.c @@ -79,21 +79,13 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 4, BOOKE_PAGESZ_64M, 1), -#ifdef CFG_LBC_CACHE_BASE /* - * TLB 5: 64M Cacheable, non-guarded - */ - SET_TLB_ENTRY(1, CFG_LBC_CACHE_BASE, CFG_LBC_CACHE_BASE, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 5, BOOKE_PAGESZ_64M, 1), -#endif - /* - * TLB 6: 64M Non-cacheable, guarded + * TLB 5: 64M Non-cacheable, guarded * 0xf8000000 64M PIXIS 0xF8000000 - 0xFBFFFFFF */ SET_TLB_ENTRY(1, CFG_LBC_NONCACHE_BASE, CFG_LBC_NONCACHE_BASE, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_64M, 1), + 0, 5, BOOKE_PAGESZ_64M, 1), }; int num_tlb_entries = ARRAY_SIZE(tlb_table); diff --git a/board/freescale/mpc8544ds/u-boot.lds b/board/freescale/mpc8544ds/u-boot.lds index 785a006..c66c69f 100644 --- a/board/freescale/mpc8544ds/u-boot.lds +++ b/board/freescale/mpc8544ds/u-boot.lds @@ -71,6 +71,7 @@ SECTIONS lib_generic/crc32.o (.text) lib_ppc/extable.o (.text) lib_generic/zlib.o (.text) + drivers/bios_emulator/atibios.o (.text) *(.text) *(.fixup) *(.got1) diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c index 2946ca1..d9e598c 100644 --- a/board/sbc8560/sbc8560.c +++ b/board/sbc8560/sbc8560.c @@ -33,6 +33,8 @@ #include <ioports.h> #include <spd_sdram.h> #include <miiphy.h> +#include <libfdt.h> +#include <fdt_support.h> long int fixed_sdram (void); @@ -421,7 +423,11 @@ long int fixed_sdram (void) #ifndef CFG_RAMBOOT volatile ccsr_ddr_t *ddr= (void *)(CFG_MPC85xx_DDR_ADDR); +#if (CFG_SDRAM_SIZE == 512) + ddr->cs0_bnds = 0x0000000f; +#else ddr->cs0_bnds = 0x00000007; +#endif ddr->cs1_bnds = 0x0010001f; ddr->cs2_bnds = 0x00000000; ddr->cs3_bnds = 0x00000000; @@ -452,3 +458,29 @@ long int fixed_sdram (void) return CFG_SDRAM_SIZE * 1024 * 1024; } #endif /* !defined(CONFIG_SPD_EEPROM) */ + + +#if defined(CONFIG_OF_BOARD_SETUP) +void +ft_board_setup(void *blob, bd_t *bd) +{ + int node, tmp[2]; +#ifdef CONFIG_PCI + const char *path; +#endif + + ft_cpu_setup(blob, bd); + + node = fdt_path_offset(blob, "/aliases"); + tmp[0] = 0; + if (node >= 0) { +#ifdef CONFIG_PCI + path = fdt_getprop(blob, node, "pci0", NULL); + if (path) { + tmp[1] = hose.last_busno - hose.first_busno; + do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1); + } +#endif + } +} +#endif diff --git a/common/fdt_support.c b/common/fdt_support.c index 3828228..93b144e 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -442,3 +442,90 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd) prop, compat, fdt_strerror(err)); } #endif /* CONFIG_HAS_FSL_DR_USB */ + +#if defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) +/* + * update crypto node properties to a specified revision of the SEC + * called with sec_rev == 0 if not on an mpc8xxxE processor + */ +void fdt_fixup_crypto_node(void *blob, int sec_rev) +{ + const struct sec_rev_prop { + u32 sec_rev; + u32 num_channels; + u32 channel_fifo_len; + u32 exec_units_mask; + u32 descriptor_types_mask; + } sec_rev_prop_list [] = { + { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ + { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ + { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ + { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ + { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ + { 0x0303, 4, 24, 0x97c, 0x03ab0abf }, /* SEC 3.3 */ + }; + char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * + sizeof("fsl,secX.Y")]; + int crypto_node, sec_idx, err; + char *p; + u32 val; + + /* locate crypto node based on lowest common compatible */ + crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); + if (crypto_node == -FDT_ERR_NOTFOUND) + return; + + /* delete it if not on an E-processor */ + if (crypto_node > 0 && !sec_rev) { + fdt_del_node(blob, crypto_node); + return; + } + + /* else we got called for possible uprev */ + for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++) + if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev) + break; + + if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) { + puts("warning: unknown SEC revision number\n"); + return; + } + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels); + err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask); + err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask); + err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len); + err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); + + val = 0; + while (sec_idx >= 0) { + p = compat_strlist + val; + val += sprintf(p, "fsl,sec%d.%d", + (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8, + sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1; + sec_idx--; + } + err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val); + if (err < 0) + printf("WARNING: could not set crypto property: %s\n", + fdt_strerror(err)); +} +#endif /* defined(CONFIG_MPC83XX) || defined(CONFIG_MPC85xx) */ diff --git a/cpu/arm926ejs/davinci/ether.c b/cpu/arm926ejs/davinci/ether.c index d286ec0..5ae035b 100644 --- a/cpu/arm926ejs/davinci/ether.c +++ b/cpu/arm926ejs/davinci/ether.c @@ -357,6 +357,8 @@ static int dm644x_eth_hw_init(void) phy.auto_negotiate = gen_auto_negotiate; } + printf("Ethernet PHY: %s\n", phy.name); + return(1); } diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c index 02c4d05..fda85c1 100644 --- a/cpu/mpc83xx/fdt.c +++ b/cpu/mpc83xx/fdt.c @@ -26,6 +26,7 @@ #include <common.h> #include <libfdt.h> #include <fdt_support.h> +#include <asm/processor.h> extern void ft_qe_setup(void *blob); @@ -33,6 +34,23 @@ DECLARE_GLOBAL_DATA_PTR; void ft_cpu_setup(void *blob, bd_t *bd) { + immap_t *immr = (immap_t *)CFG_IMMR; + int spridr = immr->sysconf.spridr; + + /* + * delete crypto node if not on an E-processor + * initial revisions of the MPC834xE/6xE have the original SEC 2.0. + * EA revisions got the SEC uprevved to 2.4 but since the default device + * tree contains SEC 2.0 properties we uprev them here. + */ + if (!IS_E_PROCESSOR(spridr)) + fdt_fixup_crypto_node(blob, 0); + else if (IS_E_PROCESSOR(spridr) && + (SPR_FAMILY(spridr) == SPR_834X_FAMILY || + SPR_FAMILY(spridr) == SPR_836X_FAMILY) && + REVID_MAJOR(spridr) >= 2) + fdt_fixup_crypto_node(blob, 0x0204); + #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) fdt_fixup_ethernet(blob, bd); @@ -60,7 +78,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CFG_NS16550 do_fixup_by_compat_u32(blob, "ns16550", - "clock-frequency", bd->bi_busfreq, 1); + "clock-frequency", CFG_NS16550_CLK, 1); #endif fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 0d50549..bde8e56 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -97,7 +97,7 @@ int checkcpu (void) if (cpu) { puts(cpu->name); - if (svr & 0x80000) + if (IS_E_PROCESSOR(svr)) puts("E"); } else { puts("Unknown"); diff --git a/cpu/mpc85xx/cpu_init.c b/cpu/mpc85xx/cpu_init.c index 736aef1..4feb751 100644 --- a/cpu/mpc85xx/cpu_init.c +++ b/cpu/mpc85xx/cpu_init.c @@ -261,37 +261,50 @@ int cpu_init_r(void) volatile uint cache_ctl; uint svr, ver; uint l2srbar; + u32 l2siz_field; svr = get_svr(); ver = SVR_SOC_VER(svr); asm("msync;isync"); cache_ctl = l2cache->l2ctl; + l2siz_field = (cache_ctl >> 28) & 0x3; - switch (cache_ctl & 0x30000000) { - case 0x20000000: - if (ver == SVR_8548 || ver == SVR_8548_E || - ver == SVR_8544 || ver == SVR_8568_E) { - puts ("512 KB "); - /* set L2E=1, L2I=1, & L2SRAM=0 */ - cache_ctl = 0xc0000000; + switch (l2siz_field) { + case 0x0: + printf(" unknown size (0x%08x)\n", cache_ctl); + return -1; + break; + case 0x1: + if (ver == SVR_8540 || ver == SVR_8560 || + ver == SVR_8541 || ver == SVR_8541_E || + ver == SVR_8555 || ver == SVR_8555_E) { + puts("128 KB "); + /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */ + cache_ctl = 0xc4000000; } else { puts("256 KB "); + cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */ + } + break; + case 0x2: + if (ver == SVR_8540 || ver == SVR_8560 || + ver == SVR_8541 || ver == SVR_8541_E || + ver == SVR_8555 || ver == SVR_8555_E) { + puts("256 KB "); /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */ cache_ctl = 0xc8000000; + } else { + puts ("512 KB "); + /* set L2E=1, L2I=1, & L2SRAM=0 */ + cache_ctl = 0xc0000000; } break; - case 0x10000000: - puts("256 KB "); - if (ver == SVR_8544 || ver == SVR_8544_E) { - cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */ - } + case 0x3: + puts("1024 KB "); + /* set L2E=1, L2I=1, & L2SRAM=0 */ + cache_ctl = 0xc0000000; break; - case 0x30000000: - case 0x00000000: - default: - printf(" unknown size (0x%08x)\n", cache_ctl); - return -1; } if (l2cache->l2ctl & 0x80000000) { diff --git a/cpu/mpc85xx/fdt.c b/cpu/mpc85xx/fdt.c index 92952e6..c159934 100644 --- a/cpu/mpc85xx/fdt.c +++ b/cpu/mpc85xx/fdt.c @@ -29,6 +29,7 @@ #include <asm/processor.h> extern void ft_qe_setup(void *blob); + #ifdef CONFIG_MP #include "mp.h" DECLARE_GLOBAL_DATA_PTR; @@ -205,6 +206,10 @@ static inline void ft_fixup_cache(void *blob) void ft_cpu_setup(void *blob, bd_t *bd) { + /* delete crypto node if not on an E-processor */ + if (!IS_E_PROCESSOR(get_svr())) + fdt_fixup_crypto_node(blob, 0); + #if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) ||\ defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) fdt_fixup_ethernet(blob, bd); @@ -224,7 +229,7 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CFG_NS16550 do_fixup_by_compat_u32(blob, "ns16550", - "clock-frequency", bd->bi_busfreq, 1); + "clock-frequency", CFG_NS16550_CLK, 1); #endif #ifdef CONFIG_CPM2 diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index 2b5d90e..10fe936 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -188,11 +188,12 @@ _start_e500: lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@h ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16M)@l - lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h - ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l + /* Align the mapping to 16MB */ + lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@h + ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xff000000, (MAS2_I|MAS2_G))@l - lis r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h - ori r9,r9,FSL_BOOKE_MAS3(0xff800000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l + lis r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h + ori r9,r9,FSL_BOOKE_MAS3(0xff000000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l mtspr MAS0,r6 mtspr MAS1,r7 diff --git a/cpu/mpc86xx/fdt.c b/cpu/mpc86xx/fdt.c index 379306e..80a5c78 100644 --- a/cpu/mpc86xx/fdt.c +++ b/cpu/mpc86xx/fdt.c @@ -30,6 +30,6 @@ void ft_cpu_setup(void *blob, bd_t *bd) #ifdef CFG_NS16550 do_fixup_by_compat_u32(blob, "ns16550", - "clock-frequency", bd->bi_busfreq, 1); + "clock-frequency", CFG_NS16550_CLK, 1); #endif } diff --git a/drivers/pci/pci_sh4.c b/drivers/pci/pci_sh4.c index 1290c0a..057b6dd 100644 --- a/drivers/pci/pci_sh4.c +++ b/drivers/pci/pci_sh4.c @@ -74,3 +74,15 @@ int pci_sh4_init(struct pci_controller *hose) hose->last_busno = pci_hose_scan(hose); return 0; } + +int pci_skip_dev(struct pci_controller *hose, pci_dev_t dev) +{ + return 0; +} + +#ifdef CONFIG_PCI_SCAN_SHOW +int pci_print_dev(struct pci_controller *hose, pci_dev_t dev) +{ + return 1; +} +#endif /* CONFIG_PCI_SCAN_SHOW */ diff --git a/include/asm-ppc/processor.h b/include/asm-ppc/processor.h index 10fd478..e617868 100644 --- a/include/asm-ppc/processor.h +++ b/include/asm-ppc/processor.h @@ -426,6 +426,7 @@ /* e500 definitions */ #define SPRN_L1CFG0 0x203 /* L1 Cache Configuration Register 0 */ #define SPRN_L1CFG1 0x204 /* L1 Cache Configuration Register 1 */ +#define SPRN_L2CFG0 0x207 /* L2 Cache Configuration Register 0 */ #define SPRN_L1CSR0 0x3f2 /* L1 Data Cache Control and Status Register 0 */ #define L1CSR0_CPE 0x00010000 /* Data Cache Parity Enable */ #define L1CSR0_DCFI 0x00000002 /* Data Cache Flash Invalidate */ @@ -434,6 +435,21 @@ #define L1CSR1_CPE 0x00010000 /* Instruction Cache Parity Enable */ #define L1CSR1_ICFI 0x00000002 /* Instruction Cache Flash Invalidate */ #define L1CSR1_ICE 0x00000001 /* Instruction Cache Enable */ +#define SPRN_L1CSR2 0x25e /* L1 Data Cache Control and Status Register 2 */ +#define SPRN_L2CSR0 0x3f9 /* L2 Data Cache Control and Status Register 0 */ +#define L2CSR0_L2E 0x80000000 /* L2 Cache Enable */ +#define L2CSR0_L2PE 0x40000000 /* L2 Cache Parity/ECC Enable */ +#define L2CSR0_L2WP 0x1c000000 /* L2 I/D Way Partioning */ +#define L2CSR0_L2CM 0x03000000 /* L2 Cache Coherency Mode */ +#define L2CSR0_L2FI 0x00200000 /* L2 Cache Flash Invalidate */ +#define L2CSR0_L2IO 0x00100000 /* L2 Cache Instruction Only */ +#define L2CSR0_L2DO 0x00010000 /* L2 Cache Data Only */ +#define L2CSR0_L2REP 0x00003000 /* L2 Line Replacement Algo */ +#define L2CSR0_L2FL 0x00000800 /* L2 Cache Flush */ +#define L2CSR0_L2LFC 0x00000400 /* L2 Cache Lock Flash Clear */ +#define L2CSR0_L2LOA 0x00000080 /* L2 Cache Lock Overflow Allocate */ +#define L2CSR0_L2LO 0x00000020 /* L2 Cache Lock Overflow */ +#define SPRN_L2CSR1 0x3fa /* L2 Data Cache Control and Status Register 1 */ #define SPRN_MMUCSR0 0x3f4 /* MMU control and status register 0 */ #define SPRN_MAS0 0x270 /* MMU Assist Register 0 */ @@ -624,8 +640,12 @@ #define MCSRR1 SPRN_MCSRR1 #define L1CSR0 SPRN_L1CSR0 #define L1CSR1 SPRN_L1CSR1 +#define L1CSR2 SPRN_L1CSR2 #define L1CFG0 SPRN_L1CFG0 #define L1CFG1 SPRN_L1CFG1 +#define L2CFG0 SPRN_L2CFG0 +#define L2CSR0 SPRN_L2CSR0 +#define L2CSR1 SPRN_L2CSR1 #define MCSR SPRN_MCSR #define MMUCSR0 SPRN_MMUCSR0 #define BUCSR SPRN_BUCSR @@ -885,6 +905,15 @@ /* Some parts define SVR[0:23] as the SOC version */ #define SVR_SOC_VER(svr) (((svr) >> 8) & 0xFFFFFF) /* SOC Version fields */ +/* whether MPC8xxxE (i.e. has SEC) */ +#if defined(CONFIG_MPC85xx) +#define IS_E_PROCESSOR(svr) (svr & 0x80000) +#else +#if defined(CONFIG_MPC83XX) +#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000)) +#endif +#endif + /* * SVR_SOC_VER() Version Values */ diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h index 669f4d7c..091fd2e 100644 --- a/include/configs/MPC8544DS.h +++ b/include/configs/MPC8544DS.h @@ -148,8 +148,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); */ #define CFG_BOOT_BLOCK 0xfc000000 /* boot TLB */ -#define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */ - #define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */ #define CFG_BR0_PRELIM 0xff801001 @@ -158,10 +156,10 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #define CFG_OR0_PRELIM 0xff806e65 #define CFG_OR1_PRELIM 0xff806e65 -#define CFG_FLASH_BANKS_LIST {0xfe800000,CFG_FLASH_BASE} +#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE} #define CFG_FLASH_QUIET_TEST -#define CFG_MAX_FLASH_BANKS 2 /* number of banks */ +#define CFG_MAX_FLASH_BANKS 1 /* number of banks */ #define CFG_MAX_FLASH_SECT 128 /* sectors per device */ #undef CFG_FLASH_CHECKSUM #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ @@ -203,30 +201,18 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); /* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM 1 -#define CFG_INIT_L1_LOCK 1 -#define CFG_INIT_L1_ADDR 0xf4010000 /* Initial L1 address */ -#define CFG_INIT_L1_END 0x00004000 /* End of used area in RAM */ - -/* define to use L2SRAM as initial stack */ -#undef CONFIG_L2_INIT_RAM -#define CFG_INIT_L2_ADDR 0xf8fc0000 -#define CFG_INIT_L2_END 0x00040000 /* End of used area in RAM */ - -#ifdef CONFIG_L1_INIT_RAM -#define CFG_INIT_RAM_ADDR CFG_INIT_L1_ADDR -#define CFG_INIT_RAM_END CFG_INIT_L1_END -#else -#define CFG_INIT_RAM_ADDR CFG_INIT_L2_ADDR -#define CFG_INIT_RAM_END CFG_INIT_L2_END -#endif +#define CONFIG_L1_INIT_RAM +#define CFG_INIT_RAM_LOCK 1 +#define CFG_INIT_RAM_ADDR 0xf4010000 /* Initial L1 address */ +#define CFG_INIT_RAM_END 0x00004000 /* End of used area in RAM */ + #define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ -#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ +#define CFG_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ /* Serial Port - controlled on board with jumper J8 * open - index 2 @@ -314,6 +300,26 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if defined(CONFIG_PCI) +/*PCIE video card used*/ +#define VIDEO_IO_OFFSET CFG_PCIE2_IO_PHYS + +/*PCI video card used*/ +/*#define VIDEO_IO_OFFSET CFG_PCI1_IO_PHYS*/ + +/* video */ +#define CONFIG_VIDEO + +#if defined(CONFIG_VIDEO) +#define CONFIG_BIOSEMU +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SW_CURSOR +#define CONFIG_VGA_AS_SINGLE_DEVICE +#define CONFIG_ATI_RADEON_FB +#define CONFIG_VIDEO_LOGO +/*#define CONFIG_CONSOLE_CURSOR*/ +#define CFG_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET +#endif + #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ @@ -382,7 +388,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy); #if CFG_MONITOR_BASE > 0xfff80000 #define CFG_ENV_ADDR 0xfff80000 #else -#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) +#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x70000) #endif #define CFG_ENV_SIZE 0x2000 #define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) */ diff --git a/include/configs/MPC8560ADS.h b/include/configs/MPC8560ADS.h index edf8525..27212162 100644 --- a/include/configs/MPC8560ADS.h +++ b/include/configs/MPC8560ADS.h @@ -538,29 +538,29 @@ #define CONFIG_BAUDRATE 115200 #define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyCPM\0" \ - "ramdiskaddr=1000000\0" \ - "ramdiskfile=your.ramdisk.u-boot\0" \ - "fdtaddr=400000\0" \ - "fdtfile=mpc8560ads.dtb\0" + "netdev=eth0\0" \ + "consoledev=ttyCPM\0" \ + "ramdiskaddr=1000000\0" \ + "ramdiskfile=your.ramdisk.u-boot\0" \ + "fdtaddr=400000\0" \ + "fdtfile=mpc8560ads.dtb\0" #define CONFIG_NFSBOOTCOMMAND \ - "setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$serverip:$rootpath " \ - "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr - $fdtaddr" + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" #define CONFIG_RAMBOOTCOMMAND \ - "setenv bootargs root=/dev/ram rw " \ - "console=$consoledev,$baudrate $othbootargs;" \ - "tftp $ramdiskaddr $ramdiskfile;" \ - "tftp $loadaddr $bootfile;" \ - "tftp $fdtaddr $fdtfile;" \ - "bootm $loadaddr $ramdiskaddr $fdtaddr" + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h index 146eafe..6345cce 100644 --- a/include/configs/sbc8560.h +++ b/include/configs/sbc8560.h @@ -24,8 +24,8 @@ * MA 02111-1307 USA */ -/* mpc8560ads board configuration file */ -/* please refer to doc/README.mpc85xx for more info */ +/* sbc8560 board configuration file */ +/* please refer to doc/README.sbc8560 for more info */ /* make sure you change the MAC address and other network params first, * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file */ @@ -102,11 +102,11 @@ #define CFG_SDRAM_SIZE 512 /* DDR is 512MB */ #define SPD_EEPROM_ADDRESS 0x55 /* DDR DIMM */ -#undef CONFIG_DDR_ECC /* only for ECC DDR module */ -#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ +#undef CONFIG_DDR_ECC /* only for ECC DDR module */ +#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ #if defined(CONFIG_MPC85xx_REV1) - #define CONFIG_DDR_DLL /* possible DLL fix needed */ + #define CONFIG_DDR_DLL /* possible DLL fix needed */ #endif #undef CONFIG_CLOCKS_IN_MHZ @@ -177,8 +177,8 @@ #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /* Serial Port */ -#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ -#undef CONFIG_CONS_NONE /* define if console on something else */ +#undef CONFIG_CONS_ON_SCC /* define if console on SCC */ +#undef CONFIG_CONS_NONE /* define if console on something else */ #define CONFIG_CONS_INDEX 1 #undef CONFIG_SERIAL_SOFTWARE_FIFO @@ -200,6 +200,11 @@ #define CFG_PROMPT_HUSH_PS2 "> " #endif +/* pass open firmware flat tree */ +#define CONFIG_OF_LIBFDT 1 +#define CONFIG_OF_BOARD_SETUP 1 +#define CONFIG_OF_STDOUT_VIA_ALIAS 1 + /* * I2C */ @@ -215,16 +220,28 @@ #define CFG_PCI_MEM_PHYS 0xC0000000 #define CFG_PCI_MEM_SIZE 0x10000000 -#if defined(CONFIG_TSEC_ENET) /* TSEC Ethernet port */ +#ifdef CONFIG_TSEC_ENET + +#ifndef CONFIG_NET_MULTI +#define CONFIG_NET_MULTI 1 +#endif -# define CONFIG_NET_MULTI 1 -# define CONFIG_MII 1 /* MII PHY management */ -# define CONFIG_MPC85xx_TSEC1 -# define CONFIG_MPC85xx_TSEC1_NAME "TSEC0" -# define TSEC1_PHY_ADDR 25 -# define TSEC1_PHYIDX 0 -/* Options are: TSEC0 */ -# define CONFIG_ETHPRIME "TSEC0" +#ifndef CONFIG_MII +#define CONFIG_MII 1 /* MII PHY management */ +#endif +#define CONFIG_TSEC1 1 +#define CONFIG_TSEC1_NAME "TSEC0" +#define CONFIG_TSEC2 1 +#define CONFIG_TSEC2_NAME "TSEC1" +#define TSEC1_PHY_ADDR 0x19 +#define TSEC2_PHY_ADDR 0x1a +#define TSEC1_PHYIDX 0 +#define TSEC2_PHYIDX 0 +#define TSEC1_FLAGS TSEC_GIGABIT +#define TSEC2_FLAGS TSEC_GIGABIT + +/* Options are: TSEC[0-1] */ +#define CONFIG_ETHPRIME "TSEC0" #elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */ @@ -272,20 +289,20 @@ * FLASH and environment organization */ -#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ +#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */ +#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */ #if 0 -#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CFG_FLASH_PROTECTION /* use hardware protection */ +#define CFG_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ +#define CFG_FLASH_PROTECTION /* use hardware protection */ #endif -#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ -#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 64 /* max number of sectors on one chip */ +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ #undef CFG_FLASH_CHECKSUM -#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */ -#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */ +#define CFG_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */ -#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ #if 0 /* XXX This doesn't work and I don't want to fix it */ @@ -315,9 +332,8 @@ #define CFG_ENV_SIZE 0x2000 #endif -#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600" +#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600" /*#define CONFIG_BOOTARGS "root=/dev/ram rw console=ttyS0,115200"*/ -#define CONFIG_BOOTCOMMAND "bootm 0xff800000 0xffa00000" #define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ @@ -389,25 +405,57 @@ #define BOOTFLAG_WARM 0x02 /* Software reboot */ #if defined(CONFIG_CMD_KGDB) - #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ - #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ #endif -/*Note: change below for your network setting!!! */ #if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC) -# define CONFIG_ETHADDR 00:01:af:07:9b:8a -# define CONFIG_HAS_ETH1 -# define CONFIG_ETH1ADDR 00:01:af:07:9b:8b -# define CONFIG_HAS_ETH2 -# define CONFIG_ETH2ADDR 00:01:af:07:9b:8c +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 #endif -#define CONFIG_SERVERIP 192.168.0.131 -#define CONFIG_IPADDR 192.168.0.105 -#define CONFIG_GATEWAYIP 0.0.0.0 -#define CONFIG_NETMASK 255.255.255.0 +/* You can compile in a MAC address and your custom net settings by using + * the following syntax. Your board should be marked with the assigned + * MAC addresses directly on it. + * + * #define CONFIG_ETHADDR de:ad:be:ef:00:00 + * #define CONFIG_ETH1ADDR fa:ke:ad:dr:es:s! + * #define CONFIG_SERVERIP <server ip> + * #define CONFIG_IPADDR <board ip> + * #define CONFIG_GATEWAYIP <gateway ip> + * #define CONFIG_NETMASK <your netmask> + */ + #define CONFIG_HOSTNAME SBC8560 #define CONFIG_ROOTPATH /home/ppc -#define CONFIG_BOOTFILE pImage +#define CONFIG_BOOTFILE uImage + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "ramdiskaddr=2000000\0" \ + "ramdiskfile=ramdisk.uboot\0" \ + "fdtaddr=c00000\0" \ + "fdtfile=sbc8560.dtb\0" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr - $fdtaddr" + + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftp $ramdiskaddr $ramdiskfile;" \ + "tftp $loadaddr $bootfile;" \ + "tftp $fdtaddr $fdtfile;" \ + "bootm $loadaddr $ramdiskaddr $fdtaddr" + +#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND #endif /* __CONFIG_H */ diff --git a/include/fdt_support.h b/include/fdt_support.h index 890993f..a7c6326 100644 --- a/include/fdt_support.h +++ b/include/fdt_support.h @@ -56,6 +56,12 @@ void fdt_fixup_dr_usb(void *blob, bd_t *bd); static inline void fdt_fixup_dr_usb(void *blob, bd_t *bd) {} #endif /* CONFIG_HAS_FSL_DR_USB */ +#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83XX) +void fdt_fixup_crypto_node(void *blob, int sec_rev); +#else +static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} +#endif + #ifdef CONFIG_OF_BOARD_SETUP void ft_board_setup(void *blob, bd_t *bd); void ft_cpu_setup(void *blob, bd_t *bd); diff --git a/include/mpc83xx.h b/include/mpc83xx.h index 939b825..897ecd6 100644 --- a/include/mpc83xx.h +++ b/include/mpc83xx.h @@ -61,21 +61,26 @@ #endif #define PARTID_NO_E(spridr) ((spridr & 0xFFFE0000) >> 16) -#define IS_E_PROCESSOR(spridr) (!(spridr & 0x00010000)) /* has SEC */ +#define SPR_FAMILY(spridr) ((spridr & 0xFFF00000) >> 20) +#define SPR_831X_FAMILY 0x80B #define SPR_8311 0x80B2 #define SPR_8313 0x80B0 #define SPR_8314 0x80B6 #define SPR_8315 0x80B4 +#define SPR_832X_FAMILY 0x806 #define SPR_8321 0x8066 #define SPR_8323 0x8062 +#define SPR_834X_FAMILY 0x803 #define SPR_8343 0x8036 #define SPR_8347_TBGA_ 0x8032 #define SPR_8347_PBGA_ 0x8034 #define SPR_8349 0x8030 +#define SPR_836X_FAMILY 0x804 #define SPR_8358_TBGA_ 0x804A #define SPR_8358_PBGA_ 0x804E #define SPR_8360 0x8048 +#define SPR_837X_FAMILY 0x80C #define SPR_8377 0x80C6 #define SPR_8378 0x80C4 #define SPR_8379 0x80C2 |