summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Kconfig22
-rw-r--r--arch/Kconfig1
-rw-r--r--arch/arc/Kconfig59
-rw-r--r--arch/arc/config.mk12
-rw-r--r--arch/arc/cpu/arcv2/Makefile7
-rw-r--r--arch/arc/cpu/arcv2/start.S254
-rw-r--r--arch/arc/include/asm/cache.h6
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/cpu/arm1176/bcm2835/Kconfig12
-rw-r--r--arch/arm/cpu/armv7/exynos/Kconfig21
-rw-r--r--arch/arm/cpu/armv7/omap3/Kconfig15
-rw-r--r--arch/arm/cpu/armv7/rmobile/Kconfig6
-rw-r--r--arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S12
-rw-r--r--arch/arm/cpu/armv7/tegra-common/Kconfig24
-rw-r--r--arch/arm/cpu/armv7/uniphier/Kconfig6
-rw-r--r--arch/arm/include/asm/arch-at91/at91_pio.h12
-rw-r--r--arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c8
-rw-r--r--arch/powerpc/cpu/ppc4xx/config.mk5
-rw-r--r--arch/powerpc/cpu/ppc4xx/cpu_init.c2
-rw-r--r--arch/powerpc/cpu/ppc4xx/start.S18
-rw-r--r--arch/powerpc/cpu/ppc4xx/u-boot.lds8
-rw-r--r--arch/powerpc/dts/Makefile11
-rw-r--r--arch/powerpc/dts/arches.dts339
-rw-r--r--arch/powerpc/dts/canyonlands.dts561
-rw-r--r--arch/powerpc/dts/glacier.dts582
-rw-r--r--arch/powerpc/include/asm/arch-ppc4xx/gpio.h7
-rw-r--r--arch/powerpc/include/asm/linkage.h7
-rw-r--r--arch/powerpc/include/asm/ppc460ex_gt.h2
-rw-r--r--arch/sandbox/Kconfig24
-rw-r--r--arch/x86/Kconfig15
-rw-r--r--board/amcc/canyonlands/Kconfig38
-rw-r--r--board/amcc/canyonlands/MAINTAINERS1
-rw-r--r--board/amcc/canyonlands/config.mk2
-rw-r--r--board/amcc/canyonlands/u-boot-ram.lds85
-rw-r--r--board/compulab/cm_t335/Kconfig9
-rw-r--r--board/gumstix/pepper/Kconfig9
-rw-r--r--board/isee/igep0033/Kconfig9
-rw-r--r--board/phytec/pcm051/Kconfig9
-rw-r--r--board/renesas/silk/Kconfig12
-rw-r--r--board/renesas/silk/MAINTAINERS6
-rw-r--r--board/renesas/silk/Makefile10
-rw-r--r--board/renesas/silk/qos.c951
-rw-r--r--board/renesas/silk/qos.h13
-rw-r--r--board/renesas/silk/silk.c163
-rw-r--r--board/samsung/goni/Kconfig9
-rw-r--r--board/samsung/smdk5420/Kconfig6
-rw-r--r--board/samsung/smdkc100/Kconfig9
-rw-r--r--board/silica/pengwyn/Kconfig9
-rw-r--r--board/ti/am335x/Kconfig16
-rw-r--r--common/Kconfig23
-rw-r--r--common/board_f.c18
-rw-r--r--common/cmd_demo.c4
-rw-r--r--common/cmd_i2c.c4
-rw-r--r--common/malloc_simple.c2
-rw-r--r--configs/Linksprite_pcDuino3_fdt_defconfig4
-rw-r--r--configs/am335x_igep0033_defconfig2
-rw-r--r--configs/am3517_crane_defconfig3
-rw-r--r--configs/am3517_evm_defconfig3
-rw-r--r--configs/arches_defconfig5
-rw-r--r--configs/axs103_defconfig5
-rw-r--r--configs/canyonlands_defconfig5
-rw-r--r--configs/cm_fx6_defconfig5
-rw-r--r--configs/cm_t335_defconfig2
-rw-r--r--configs/cm_t3517_defconfig3
-rw-r--r--configs/cm_t35_defconfig3
-rw-r--r--configs/devkit8000_defconfig3
-rw-r--r--configs/dig297_defconfig3
-rw-r--r--configs/eco5pk_defconfig3
-rw-r--r--configs/glacier_defconfig5
-rw-r--r--configs/glacier_ramboot_defconfig8
-rw-r--r--configs/gwventana_defconfig2
-rw-r--r--configs/mcx_defconfig3
-rw-r--r--configs/mt_ventoux_defconfig3
-rw-r--r--configs/mx6dlsabreauto_defconfig4
-rw-r--r--configs/mx6dlsabresd_defconfig2
-rw-r--r--configs/mx6qsabreauto_defconfig4
-rw-r--r--configs/mx6qsabrelite_defconfig2
-rw-r--r--configs/mx6qsabresd_defconfig4
-rw-r--r--configs/mx6sabresd_spl_defconfig3
-rw-r--r--configs/mx6sxsabresd_defconfig2
-rw-r--r--configs/nokia_rx51_defconfig5
-rw-r--r--configs/omap3_beagle_defconfig3
-rw-r--r--configs/omap3_evm_defconfig3
-rw-r--r--configs/omap3_evm_quick_mmc_defconfig3
-rw-r--r--configs/omap3_evm_quick_nand_defconfig3
-rw-r--r--configs/omap3_ha_defconfig3
-rw-r--r--configs/omap3_logic_defconfig3
-rw-r--r--configs/omap3_mvblx_defconfig3
-rw-r--r--configs/omap3_pandora_defconfig3
-rw-r--r--configs/omap3_sdp3430_defconfig3
-rw-r--r--configs/pcm051_rev1_defconfig2
-rw-r--r--configs/pcm051_rev3_defconfig2
-rw-r--r--configs/pengwyn_defconfig2
-rw-r--r--configs/pepper_defconfig2
-rw-r--r--configs/rpi_defconfig2
-rw-r--r--configs/s5p_goni_defconfig2
-rw-r--r--configs/sandbox_defconfig2
-rw-r--r--configs/silk_defconfig3
-rw-r--r--configs/smdkc100_defconfig2
-rw-r--r--configs/snapper9260_defconfig5
-rw-r--r--configs/snapper9g20_defconfig5
-rw-r--r--configs/socfpga_socrates_defconfig3
-rw-r--r--configs/stv0991_defconfig4
-rw-r--r--configs/tao3530_defconfig3
-rw-r--r--configs/tricorder_defconfig3
-rw-r--r--configs/tricorder_flash_defconfig3
-rw-r--r--configs/twister_defconfig3
-rw-r--r--doc/driver-model/spi-howto.txt4
-rw-r--r--drivers/Kconfig4
-rw-r--r--drivers/core/Kconfig50
-rw-r--r--drivers/core/device.c12
-rw-r--r--drivers/core/root.c64
-rw-r--r--drivers/demo/Kconfig26
-rw-r--r--drivers/gpio/Kconfig7
-rw-r--r--drivers/gpio/at91_gpio.c10
-rw-r--r--drivers/gpio/mxc_gpio.c84
-rw-r--r--drivers/gpio/omap_gpio.c2
-rw-r--r--drivers/i2c/Kconfig12
-rw-r--r--drivers/i2c/adi_i2c.c6
-rw-r--r--drivers/i2c/i2c-uclass.c11
-rw-r--r--drivers/i2c/kona_i2c.c16
-rw-r--r--drivers/i2c/mv_i2c.c10
-rw-r--r--drivers/i2c/s3c24x0_i2c.c4
-rw-r--r--drivers/misc/Kconfig9
-rw-r--r--drivers/mtd/Kconfig2
-rw-r--r--drivers/mtd/spi/Kconfig14
-rw-r--r--drivers/serial/Kconfig6
-rw-r--r--drivers/serial/Makefile1
-rw-r--r--drivers/serial/serial-uclass.c16
-rw-r--r--drivers/serial/serial_ppc.c40
-rw-r--r--drivers/serial/serial_sh.c321
-rw-r--r--drivers/serial/serial_sh.h30
-rw-r--r--drivers/spi/Kconfig10
-rw-r--r--drivers/thermal/Kconfig7
-rw-r--r--include/config_defaults.h6
-rw-r--r--include/configs/amcc-common.h2
-rw-r--r--include/configs/canyonlands.h38
-rw-r--r--include/configs/cm_fx6.h7
-rw-r--r--include/configs/exynos-common.h7
-rw-r--r--include/configs/gw_ventana.h1
-rw-r--r--include/configs/mx6sabre_common.h3
-rw-r--r--include/configs/mx6sxsabresd.h1
-rw-r--r--include/configs/novena.h1
-rw-r--r--include/configs/peach-pi.h1
-rw-r--r--include/configs/peach-pit.h1
-rw-r--r--include/configs/rpi.h7
-rw-r--r--include/configs/s5p_goni.h5
-rw-r--r--include/configs/sandbox.h13
-rw-r--r--include/configs/silk.h117
-rw-r--r--include/configs/smdkc100.h7
-rw-r--r--include/configs/snapper9260.h5
-rw-r--r--include/configs/socfpga_common.h7
-rw-r--r--include/configs/stv0991.h11
-rw-r--r--include/configs/sunxi-common.h4
-rw-r--r--include/configs/tegra-common.h11
-rw-r--r--include/configs/ti_am335x_common.h7
-rw-r--r--include/configs/ti_omap3_common.h5
-rw-r--r--include/configs/uniphier.h4
-rw-r--r--include/configs/x86-common.h6
-rw-r--r--include/dm/device.h10
-rw-r--r--include/dm/platform_data/serial_sh.h37
-rw-r--r--include/i2c.h13
-rw-r--r--include/net.h4
-rw-r--r--net/net.c25
-rw-r--r--net/ping.c10
-rw-r--r--test/Kconfig1
-rw-r--r--test/dm/Kconfig8
-rw-r--r--test/dm/i2c.c6
168 files changed, 4431 insertions, 386 deletions
diff --git a/Kconfig b/Kconfig
index 9af31e3..75bab7f 100644
--- a/Kconfig
+++ b/Kconfig
@@ -56,6 +56,25 @@ config CC_OPTIMIZE_FOR_SIZE
This option is enabled by default for U-Boot.
+config SYS_MALLOC_F
+ bool "Enable malloc() pool before relocation"
+ default 0x400
+ help
+ Before relocation memory is very limited on many platforms. Still,
+ we can provide a small malloc() pool if needed. Driver model in
+ particular needs this to operate, so that it can allocate the
+ initial serial device and any others that are needed.
+
+config SYS_MALLOC_F_LEN
+ hex "Size of malloc() pool before relocation"
+ depends on SYS_MALLOC_F
+ default 0x400
+ help
+ Before relocation memory is very limited on many platforms. Still,
+ we can provide a small malloc() pool if needed. Driver model in
+ particular needs this to operate, so that it can allocate the
+ initial serial device and any others that are needed.
+
menuconfig EXPERT
bool "Configure standard U-Boot features (expert users)"
help
@@ -118,6 +137,7 @@ config FIT_VERBOSE
config FIT_SIGNATURE
bool "Enable signature verification of FIT uImages"
depends on FIT
+ depends on DM
select RSA
help
This option enables signature verification of FIT uImages,
@@ -165,3 +185,5 @@ source "drivers/Kconfig"
source "fs/Kconfig"
source "lib/Kconfig"
+
+source "test/Kconfig"
diff --git a/arch/Kconfig b/arch/Kconfig
index 132123b..3d419bc 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -40,6 +40,7 @@ config OPENRISC
config PPC
bool "PowerPC architecture"
select HAVE_PRIVATE_LIBGCC
+ select SUPPORT_OF_CONTROL
config SANDBOX
bool "Sandbox"
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index a8dc4e2..24f5c02 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -8,30 +8,79 @@ config USE_PRIVATE_LIBGCC
default y
config SYS_CPU
- default "arcv1"
+ default "arcv1" if ISA_ARCOMPACT
+ default "arcv2" if ISA_ARCV2
+
+choice
+ prompt "ARC Instruction Set"
+ default ISA_ARCOMPACT
+
+config ISA_ARCOMPACT
+ bool "ARCompact ISA"
+ help
+ The original ARC ISA of ARC600/700 cores
+
+config ISA_ARCV2
+ bool "ARC ISA v2"
+ help
+ ISA for the Next Generation ARC-HS cores
+
+endchoice
choice
prompt "CPU selection"
- default CPU_ARC770D
+ default CPU_ARC770D if ISA_ARCOMPACT
+ default CPU_ARCHS38 if ISA_ARCV2
config CPU_ARC750D
bool "ARC 750D"
select ARC_MMU_V2
+ depends on ISA_ARCOMPACT
help
Choose this option to build an U-Boot for ARC750D CPU.
config CPU_ARC770D
bool "ARC 770D"
select ARC_MMU_V3
+ depends on ISA_ARCOMPACT
help
Choose this option to build an U-Boot for ARC770D CPU.
+config CPU_ARCEM6
+ bool "ARC EM6"
+ select ARC_MMU_ABSENT
+ depends on ISA_ARCV2
+ help
+ Next Generation ARC Core based on ISA-v2 ISA without MMU.
+
+config CPU_ARCHS36
+ bool "ARC HS36"
+ select ARC_MMU_ABSENT
+ depends on ISA_ARCV2
+ help
+ Next Generation ARC Core based on ISA-v2 ISA without MMU.
+
+config CPU_ARCHS38
+ bool "ARC HS38"
+ select ARC_MMU_V4
+ depends on ISA_ARCV2
+ help
+ Next Generation ARC Core based on ISA-v2 ISA with MMU.
+
endchoice
choice
prompt "MMU Version"
default ARC_MMU_V3 if CPU_ARC770D
default ARC_MMU_V2 if CPU_ARC750D
+ default ARC_MMU_ABSENT if CPU_ARCEM6
+ default ARC_MMU_ABSENT if CPU_ARCHS36
+ default ARC_MMU_V4 if CPU_ARCHS38
+
+config ARC_MMU_ABSENT
+ bool "No MMU"
+ help
+ No MMU
config ARC_MMU_V2
bool "MMU v2"
@@ -48,6 +97,12 @@ config ARC_MMU_V3
Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
Shared Address Spaces (SASID)
+config ARC_MMU_V4
+ bool "MMU v4"
+ depends on CPU_ARCHS38
+ help
+ Introduced as a part of ARC HS38 release.
+
endchoice
config CPU_BIG_ENDIAN
diff --git a/arch/arc/config.mk b/arch/arc/config.mk
index f1e81b6..4fcd407 100644
--- a/arch/arc/config.mk
+++ b/arch/arc/config.mk
@@ -38,6 +38,18 @@ ifdef CONFIG_CPU_ARC770D
PLATFORM_CPPFLAGS += -marc700 -mlock -mswape
endif
+ifdef CONFIG_CPU_ARCEM6
+PLATFORM_CPPFLAGS += -marcem
+endif
+
+ifdef CONFIG_CPU_ARCHS34
+PLATFORM_CPPFLAGS += -marchs
+endif
+
+ifdef CONFIG_CPU_ARCHS38
+PLATFORM_CPPFLAGS += -marchs
+endif
+
PLATFORM_CPPFLAGS += -ffixed-r25 -D__ARC__ -gdwarf-2
# Needed for relocation
diff --git a/arch/arc/cpu/arcv2/Makefile b/arch/arc/cpu/arcv2/Makefile
new file mode 100644
index 0000000..cc69e5a
--- /dev/null
+++ b/arch/arc/cpu/arcv2/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2013-2015 Synopsys, Inc. All rights reserved.
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += start.o
diff --git a/arch/arc/cpu/arcv2/start.S b/arch/arc/cpu/arcv2/start.S
new file mode 100644
index 0000000..3ce6896
--- /dev/null
+++ b/arch/arc/cpu/arcv2/start.S
@@ -0,0 +1,254 @@
+/*
+ * Copyright (C) 2013-2015 Synopsys, Inc. All rights reserved.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/arcregs.h>
+
+/*
+ * Note on the LD/ST addressing modes with address register write-back
+ *
+ * LD.a same as LD.aw
+ *
+ * LD.a reg1, [reg2, x] => Pre Incr
+ * Eff Addr for load = [reg2 + x]
+ *
+ * LD.ab reg1, [reg2, x] => Post Incr
+ * Eff Addr for load = [reg2]
+ */
+
+.macro PUSH reg
+ st.a \reg, [%sp, -4]
+.endm
+
+.macro PUSHAX aux
+ lr %r9, [\aux]
+ PUSH %r9
+.endm
+
+.macro SAVE_R1_TO_R24
+ PUSH %r1
+ PUSH %r2
+ PUSH %r3
+ PUSH %r4
+ PUSH %r5
+ PUSH %r6
+ PUSH %r7
+ PUSH %r8
+ PUSH %r9
+ PUSH %r10
+ PUSH %r11
+ PUSH %r12
+ PUSH %r13
+ PUSH %r14
+ PUSH %r15
+ PUSH %r16
+ PUSH %r17
+ PUSH %r18
+ PUSH %r19
+ PUSH %r20
+ PUSH %r21
+ PUSH %r22
+ PUSH %r23
+ PUSH %r24
+.endm
+
+.macro SAVE_ALL_SYS
+ /* saving %r0 to reg->r0 in advance since weread %ecr into it */
+ st %r0, [%sp, -8]
+ lr %r0, [%ecr] /* all stack addressing is manual so far */
+ st %r0, [%sp]
+ st %sp, [%sp, -4]
+ /* now move %sp to reg->r0 position so we can do "push" automatically */
+ sub %sp, %sp, 8
+
+ SAVE_R1_TO_R24
+ PUSH %r25
+ PUSH %gp
+ PUSH %fp
+ PUSH %blink
+ PUSHAX %eret
+ PUSHAX %erstatus
+ PUSH %lp_count
+ PUSHAX %lp_end
+ PUSHAX %lp_start
+ PUSHAX %erbta
+.endm
+
+.macro SAVE_EXCEPTION_SOURCE
+#ifdef CONFIG_MMU
+ /* If MMU exists exception faulting address is loaded in EFA reg */
+ lr %r0, [%efa]
+#else
+ /* Otherwise in ERET (exception return) reg */
+ lr %r0, [%eret]
+#endif
+.endm
+
+.section .ivt, "a",@progbits
+.align 4
+ /* Critical system events */
+.word _start /* 0 - 0x000 */
+.word memory_error /* 1 - 0x008 */
+.word instruction_error /* 2 - 0x010 */
+
+ /* Exceptions */
+.word EV_MachineCheck /* 0x100, Fatal Machine check (0x20) */
+.word EV_TLBMissI /* 0x108, Intruction TLB miss (0x21) */
+.word EV_TLBMissD /* 0x110, Data TLB miss (0x22) */
+.word EV_TLBProtV /* 0x118, Protection Violation (0x23)
+ or Misaligned Access */
+.word EV_PrivilegeV /* 0x120, Privilege Violation (0x24) */
+.word EV_Trap /* 0x128, Trap exception (0x25) */
+.word EV_Extension /* 0x130, Extn Intruction Excp (0x26) */
+
+ /* Device interrupts */
+.rept 29
+ j interrupt_handler /* 3:31 - 0x018:0xF8 */
+.endr
+
+.text
+.globl _start
+_start:
+ /* Setup interrupt vector base that matches "__text_start" */
+ sr __ivt_start, [ARC_AUX_INTR_VEC_BASE]
+
+ /* Setup stack pointer */
+ mov %sp, CONFIG_SYS_INIT_SP_ADDR
+ mov %fp, %sp
+
+ /* Clear bss */
+ mov %r0, __bss_start
+ mov %r1, __bss_end
+
+clear_bss:
+ st.ab 0, [%r0, 4]
+ brlt %r0, %r1, clear_bss
+
+ /* Zero the one and only argument of "board_init_f" */
+ mov_s %r0, 0
+ j board_init_f
+
+memory_error:
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_memory_error
+
+instruction_error:
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_instruction_error
+
+interrupt_handler:
+ /* Todo - save and restore CPU context when interrupts will be in use */
+ bl do_interrupt_handler
+ rtie
+
+EV_MachineCheck:
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_machine_check_fault
+
+EV_TLBMissI:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_itlb_miss
+
+EV_TLBMissD:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_dtlb_miss
+
+EV_TLBProtV:
+ SAVE_ALL_SYS
+ SAVE_EXCEPTION_SOURCE
+ mov %r1, %sp
+ j do_tlb_prot_violation
+
+EV_PrivilegeV:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_privilege_violation
+
+EV_Trap:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_trap
+
+EV_Extension:
+ SAVE_ALL_SYS
+ mov %r0, %sp
+ j do_extension
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * r0 = start_addr_sp
+ * r1 = new__gd
+ * r2 = relocaddr
+ */
+.align 4
+.globl relocate_code
+relocate_code:
+ /*
+ * r0-r12 might be clobbered by C functions
+ * so we use r13-r16 for storage here
+ */
+ mov %r13, %r0 /* save addr_sp */
+ mov %r14, %r1 /* save addr of gd */
+ mov %r15, %r2 /* save addr of destination */
+
+ mov %r16, %r2 /* %r9 - relocation offset */
+ sub %r16, %r16, __image_copy_start
+
+/* Set up the stack */
+stack_setup:
+ mov %sp, %r13
+ mov %fp, %sp
+
+/* Check if monitor is loaded right in place for relocation */
+ mov %r0, __image_copy_start
+ cmp %r0, %r15 /* skip relocation if code loaded */
+ bz do_board_init_r /* in target location already */
+
+/* Copy data (__image_copy_start - __image_copy_end) to new location */
+ mov %r1, %r15
+ mov %r2, __image_copy_end
+ sub %r2, %r2, %r0 /* r3 <- amount of bytes to copy */
+ asr %r2, %r2, 2 /* r3 <- amount of words to copy */
+ mov %lp_count, %r2
+ lp copy_end
+ ld.ab %r2,[%r0,4]
+ st.ab %r2,[%r1,4]
+copy_end:
+
+/* Fix relocations related issues */
+ bl do_elf_reloc_fixups
+#ifndef CONFIG_SYS_ICACHE_OFF
+ bl invalidate_icache_all
+#endif
+#ifndef CONFIG_SYS_DCACHE_OFF
+ bl flush_dcache_all
+#endif
+
+/* Update position of intterupt vector table */
+ lr %r0, [ARC_AUX_INTR_VEC_BASE] /* Read current position */
+ add %r0, %r0, %r16 /* Update address */
+ sr %r0, [ARC_AUX_INTR_VEC_BASE] /* Write new position */
+
+do_board_init_r:
+/* Prepare for exection of "board_init_r" in relocated monitor */
+ mov %r2, board_init_r /* old address of "board_init_r()" */
+ add %r2, %r2, %r16 /* new address of "board_init_r()" */
+ mov %r0, %r14 /* 1-st parameter: gd_t */
+ mov %r1, %r15 /* 2-nd parameter: dest_addr */
+ j [%r2]
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index 2725961..8a77cd9 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -17,10 +17,14 @@
#define ARCH_DMA_MINALIGN 128
#endif
-#if defined(CONFIG_ARC_MMU_V2)
+#if defined(ARC_MMU_ABSENT)
+#define CONFIG_ARC_MMU_VER 0
+#elif defined(CONFIG_ARC_MMU_V2)
#define CONFIG_ARC_MMU_VER 2
#elif defined(CONFIG_ARC_MMU_V3)
#define CONFIG_ARC_MMU_VER 3
+#elif defined(CONFIG_ARC_MMU_V4)
+#define CONFIG_ARC_MMU_VER 4
#endif
#endif /* __ASM_ARC_CACHE_H */
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1f1ccad..41f3220 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -839,6 +839,8 @@ endchoice
source "arch/arm/cpu/arm926ejs/davinci/Kconfig"
+source "arch/arm/cpu/arm1176/bcm2835/Kconfig"
+
source "arch/arm/cpu/armv7/exynos/Kconfig"
source "arch/arm/cpu/armv7/highbank/Kconfig"
diff --git a/arch/arm/cpu/arm1176/bcm2835/Kconfig b/arch/arm/cpu/arm1176/bcm2835/Kconfig
new file mode 100644
index 0000000..94f57d7
--- /dev/null
+++ b/arch/arm/cpu/arm1176/bcm2835/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_RPI
+
+config DM
+ default y if !SPL_BUILD
+
+config DM_SERIAL
+ default y if !SPL_BUILD
+
+config DM_GPIO
+ default y if !SPL_BUILD
+
+endif
diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig
index 7fcb5d2..2064efa 100644
--- a/arch/arm/cpu/armv7/exynos/Kconfig
+++ b/arch/arm/cpu/armv7/exynos/Kconfig
@@ -65,6 +65,27 @@ endchoice
config SYS_SOC
default "exynos"
+config DM
+ default y if !SPL_BUILD
+
+config DM_SERIAL
+ default y if !SPL_BUILD
+
+config DM_SPI
+ default y if !SPL_BUILD
+
+config DM_SPI_FLASH
+ default y if !SPL_BUILD
+
+config DM_GPIO
+ default y if !SPL_BUILD
+
+config SYS_MALLOC_F
+ default y if !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+ default 0x400 if !SPL_BUILD
+
source "board/samsung/smdkv310/Kconfig"
source "board/samsung/trats/Kconfig"
source "board/samsung/universal_c210/Kconfig"
diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig
index a029379..4644098 100644
--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/cpu/armv7/omap3/Kconfig
@@ -93,6 +93,21 @@ config TARGET_TWISTER
endchoice
+config DM
+ default y if !SPL_BUILD
+
+config DM_GPIO
+ default y if DM && !SPL_BUILD
+
+config DM_SERIAL
+ default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F
+ default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+ default 0x400 if DM && !SPL_BUILD
+
config SYS_SOC
default "omap3"
diff --git a/arch/arm/cpu/armv7/rmobile/Kconfig b/arch/arm/cpu/armv7/rmobile/Kconfig
index 6d94199..3586650 100644
--- a/arch/arm/cpu/armv7/rmobile/Kconfig
+++ b/arch/arm/cpu/armv7/rmobile/Kconfig
@@ -21,6 +21,9 @@ config TARGET_KZM9G
config TARGET_ALT
bool "Alt board"
+config TARGET_SILK
+ bool "Silk board"
+
endchoice
config SYS_SOC
@@ -28,7 +31,7 @@ config SYS_SOC
config RMOBILE_EXTRAM_BOOT
bool "Enable boot from RAM"
- depends on TARGET_ALT || TARGET_KOELSCH || TARGET_LAGER
+ depends on TARGET_ALT || TARGET_KOELSCH || TARGET_LAGER || TARGET_SILK
default n
source "board/atmark-techno/armadillo-800eva/Kconfig"
@@ -37,5 +40,6 @@ source "board/renesas/koelsch/Kconfig"
source "board/renesas/lager/Kconfig"
source "board/kmc/kzm9g/Kconfig"
source "board/renesas/alt/Kconfig"
+source "board/renesas/silk/Kconfig"
endif
diff --git a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
index d47546a..a5dbbea 100644
--- a/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
+++ b/arch/arm/cpu/armv7/rmobile/lowlevel_init_ca15.S
@@ -40,7 +40,7 @@ do_lowlevel_init:
and r1, r1, #0x7F00
lsrs r1, r1, #8
cmp r1, #0x4C /* 0x4C is ID of r8a7794 */
- beq _exit_init_l2_a15
+ beq _enable_actlr_smp
/* surpress wfe if ca15 */
tst r4, #4
@@ -64,6 +64,16 @@ do_lowlevel_init:
orrne r0, r0, #0x20 /* L2CTLR[5] */
#endif
mcrne p15, 1, r0, c9, c0, 2
+
+ b _exit_init_l2_a15
+
+_enable_actlr_smp: /* R8A7794 only (CA7) */
+#ifndef CONFIG_DCACHE_OFF
+ mrc p15, 0, r0, c1, c0, 1
+ orr r0, r0, #0x40
+ mcr p15, 0, r0, c1, c0, 1
+#endif
+
_exit_init_l2_a15:
ldr r3, =(CONFIG_SYS_INIT_SP_ADDR)
sub sp, r3, #4
diff --git a/arch/arm/cpu/armv7/tegra-common/Kconfig b/arch/arm/cpu/armv7/tegra-common/Kconfig
index 1446452..ee32469 100644
--- a/arch/arm/cpu/armv7/tegra-common/Kconfig
+++ b/arch/arm/cpu/armv7/tegra-common/Kconfig
@@ -17,9 +17,33 @@ config TEGRA124
endchoice
+config SYS_MALLOC_F
+ default y
+
+config SYS_MALLOC_F_LEN
+ default 0x1800
+
config USE_PRIVATE_LIBGCC
default y if SPL_BUILD
+config DM
+ default y if !SPL_BUILD
+
+config DM_SERIAL
+ default y if !SPL_BUILD
+
+config DM_SPI
+ default y if !SPL_BUILD
+
+config DM_SPI_FLASH
+ default y if !SPL_BUILD
+
+config DM_I2C
+ default y if !SPL_BUILD
+
+config DM_GPIO
+ default y if !SPL_BUILD
+
source "arch/arm/cpu/armv7/tegra20/Kconfig"
source "arch/arm/cpu/armv7/tegra30/Kconfig"
source "arch/arm/cpu/armv7/tegra114/Kconfig"
diff --git a/arch/arm/cpu/armv7/uniphier/Kconfig b/arch/arm/cpu/armv7/uniphier/Kconfig
index 5c5a84f..1a47ac9 100644
--- a/arch/arm/cpu/armv7/uniphier/Kconfig
+++ b/arch/arm/cpu/armv7/uniphier/Kconfig
@@ -48,6 +48,12 @@ config DCC_MICRO_SUPPORT_CARD
endchoice
+config SYS_MALLOC_F
+ default y
+
+config SYS_MALLOC_F_LEN
+ default 0x2000
+
config CMD_PINMON
bool "Enable boot mode pins monitor command"
default y
diff --git a/arch/arm/include/asm/arch-at91/at91_pio.h b/arch/arm/include/asm/arch-at91/at91_pio.h
index 50464ff..3012278 100644
--- a/arch/arm/include/asm/arch-at91/at91_pio.h
+++ b/arch/arm/include/asm/arch-at91/at91_pio.h
@@ -114,14 +114,10 @@ typedef union at91_pio {
at91_port_t pioa;
at91_port_t piob;
at91_port_t pioc;
- #if (ATMEL_PIO_PORTS > 3)
- at91_port_t piod;
- #endif
- #if (ATMEL_PIO_PORTS > 4)
- at91_port_t pioe;
- #endif
- } ;
- at91_port_t port[ATMEL_PIO_PORTS];
+ at91_port_t piod; /* not present in all hardware */
+ at91_port_t pioe;/* not present in all hardware */
+ };
+ at91_port_t port[5];
} at91_pio_t;
#ifdef CONFIG_AT91_GPIO
diff --git a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
index 71bb9d7..7202c3f 100644
--- a/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
+++ b/arch/powerpc/cpu/ppc4xx/44x_spd_ddr2.c
@@ -424,6 +424,14 @@ phys_size_t initdram(int board_type)
int write_recovery;
phys_size_t dram_size = 0;
+ if (IS_ENABLED(CONFIG_SYS_RAMBOOT)) {
+ /*
+ * Reduce RAM size to avoid overwriting memory used by
+ * current stack? Not sure what is happening.
+ */
+ return sdram_memsize() / 2;
+ }
+
num_dimm_banks = sizeof(iic0_dimm_addr);
/*------------------------------------------------------------------
diff --git a/arch/powerpc/cpu/ppc4xx/config.mk b/arch/powerpc/cpu/ppc4xx/config.mk
index f87c9dc..9cb41bb 100644
--- a/arch/powerpc/cpu/ppc4xx/config.mk
+++ b/arch/powerpc/cpu/ppc4xx/config.mk
@@ -7,10 +7,7 @@
PLATFORM_CPPFLAGS += -mstring -msoft-float
-cfg=$(srctree)/include/configs/$(CONFIG_SYS_CONFIG_NAME:"%"=%).h
-is440:=$(shell grep CONFIG_440 $(cfg))
-
-ifneq (,$(findstring CONFIG_440,$(is440)))
+ifneq (,$(CONFIG_440))
PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440
else
PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405
diff --git a/arch/powerpc/cpu/ppc4xx/cpu_init.c b/arch/powerpc/cpu/ppc4xx/cpu_init.c
index e5a0e21..5f5c720 100644
--- a/arch/powerpc/cpu/ppc4xx/cpu_init.c
+++ b/arch/powerpc/cpu/ppc4xx/cpu_init.c
@@ -450,10 +450,12 @@ cpu_init_f (void)
PLB4Ax_ACR_RDP_4DEEP);
#endif /* CONFIG_440SP/SPE || CONFIG_460EX/GT || CONFIG_405EX */
+#ifndef CONFIG_SYS_GENERIC_BOARD
gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
/* Clear initial global data */
memset((void *)gd, 0, sizeof(gd_t));
+#endif
}
/*
diff --git a/arch/powerpc/cpu/ppc4xx/start.S b/arch/powerpc/cpu/ppc4xx/start.S
index 09a02d7..7a0f0d2 100644
--- a/arch/powerpc/cpu/ppc4xx/start.S
+++ b/arch/powerpc/cpu/ppc4xx/start.S
@@ -760,6 +760,15 @@ _start:
#endif
bl cpu_init_f /* run low-level CPU init code (from Flash) */
+#ifdef CONFIG_SYS_GENERIC_BOARD
+ mr r3, r1
+ bl board_init_f_mem
+ mr r1, r3
+ li r0,0
+ stwu r0, -4(r1)
+ stwu r0, -4(r1)
+#endif
+ li r3, 0
bl board_init_f
/* NOTREACHED - board_init_f() does not return */
@@ -1027,7 +1036,14 @@ _start:
GET_GOT /* initialize GOT access */
bl cpu_init_f /* run low-level CPU init code (from Flash) */
-
+#ifdef CONFIG_SYS_GENERIC_BOARD
+ mr r3, r1
+ bl board_init_f_mem
+ mr r1, r3
+ stwu r0, -4(r1)
+ stwu r0, -4(r1)
+#endif
+ li r3, 0
bl board_init_f /* run first part of init code (from Flash) */
/* NOTREACHED - board_init_f() does not return */
diff --git a/arch/powerpc/cpu/ppc4xx/u-boot.lds b/arch/powerpc/cpu/ppc4xx/u-boot.lds
index 8773178..1980508 100644
--- a/arch/powerpc/cpu/ppc4xx/u-boot.lds
+++ b/arch/powerpc/cpu/ppc4xx/u-boot.lds
@@ -76,9 +76,13 @@ SECTIONS
. = ALIGN(256);
__init_begin = .;
.text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
+ .data.init : {
+ *(.data.init)
+ . = ALIGN(256);
+ LONG(0) LONG(0) /* Extend u-boot.bin to here */
+ }
__init_end = .;
+ _end = .;
#ifndef CONFIG_SPL
#ifdef CONFIG_440
diff --git a/arch/powerpc/dts/Makefile b/arch/powerpc/dts/Makefile
new file mode 100644
index 0000000..ad104b9
--- /dev/null
+++ b/arch/powerpc/dts/Makefile
@@ -0,0 +1,11 @@
+dtb-$(CONFIG_TARGET_CANYONLANDS) += arches.dtb canyonlands.dtb glacier.dtb
+
+targets += $(dtb-y)
+
+DTC_FLAGS += -R 4 -p 0x1000
+
+PHONY += dtbs
+dtbs: $(addprefix $(obj)/, $(dtb-y))
+ @:
+
+clean-files := *.dtb
diff --git a/arch/powerpc/dts/arches.dts b/arch/powerpc/dts/arches.dts
new file mode 100644
index 0000000..bd5ebfd
--- /dev/null
+++ b/arch/powerpc/dts/arches.dts
@@ -0,0 +1,339 @@
+/*
+ * Device Tree Source for AMCC Arches (dual 460GT board)
+ *
+ * (C) Copyright 2008 Applied Micro Circuits Corporation
+ * Victor Gallardo <vgallardo@amcc.com>
+ * Adam Graham <agraham@amcc.com>
+ *
+ * Based on the glacier.dts file
+ * Stefan Roese <sr@denx.de>
+ * Copyright 2008 DENX Software Engineering
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,arches";
+ compatible = "amcc,arches";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ ethernet2 = &EMAC2;
+ serial0 = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460GT";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ next-level-cache = <&L2C0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460gt";
+ dcr-reg = <0x00e 0x002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460gt";
+ dcr-reg = <0x00c 0x002>;
+ };
+
+ L2C0: l2c {
+ compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+ dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */
+ 0x030 0x008>; /* L2 cache DCR's */
+ cache-line-size = <32>; /* 32 bytes */
+ cache-size = <262144>; /* L2, 256K */
+ interrupt-parent = <&UIC1>;
+ interrupts = <11 1>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460gt", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ CRYPTO: crypto@180000 {
+ compatible = "amcc,ppc460gt-crypto", "amcc,ppc4xx-crypto";
+ reg = <4 0x00180000 0x80400>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1d 0x4>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <3>;
+ num-rx-chans = <24>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x3 0x4
+ /*TXDE*/ 0x4 0x4
+ /*RXDE*/ 0x5 0x4>;
+ desc-base-addr-high = <0x8>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460gt", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460gt", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ interrupts = <0x6 0x4>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl256n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0x00000000 0x00000000 0x02000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label = "root";
+ reg = <0x00200000 0x00200000>;
+ };
+ partition@400000 {
+ label = "user";
+ reg = <0x00400000 0x01b60000>;
+ };
+ partition@1f60000 {
+ label = "env";
+ reg = <0x01f60000 0x00040000>;
+ };
+ partition@1fa0000 {
+ label = "u-boot";
+ reg = <0x01fa0000 0x00060000>;
+ };
+ };
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1 0x4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <0xef600700 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sttm@4a {
+ compatible = "ad,ad7414";
+ reg = <0x4a>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x0 0x8>;
+ };
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <0xef600800 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x3 0x4>;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <0xef601350 0x00000030>;
+ };
+
+ TAH1: emac-tah@ef601450 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <0xef601450 0x00000030>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+ /*Wake*/ 0x1 &UIC2 0x14 0x4>;
+ reg = <0xef600e00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ phy-mode = "sgmii";
+ phy-map = <0xffffffff>;
+ gpcs-address = <0x0000000a>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+ /*Wake*/ 0x1 &UIC2 0x15 0x4>;
+ reg = <0xef600f00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ phy-mode = "sgmii";
+ phy-map = <0x00000000>;
+ gpcs-address = <0x0000000b>;
+ tah-device = <&TAH1>;
+ tah-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC2: ethernet@ef601100 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC2>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+ /*Wake*/ 0x1 &UIC2 0x16 0x4>;
+ reg = <0xef601100 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <2>;
+ mal-rx-channel = <16>;
+ cell-index = <2>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
+ phy-mode = "sgmii";
+ phy-map = <0x00000001>;
+ gpcs-address = <0x0000000C>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/dts/canyonlands.dts b/arch/powerpc/dts/canyonlands.dts
new file mode 100644
index 0000000..0a2f5d7
--- /dev/null
+++ b/arch/powerpc/dts/canyonlands.dts
@@ -0,0 +1,561 @@
+/*
+ * Device Tree Source for AMCC Canyonlands (460EX)
+ *
+ * Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,canyonlands";
+ compatible = "amcc,canyonlands";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ chosen {
+ stdout-path = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460EX";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ next-level-cache = <&L2C0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460ex","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460ex";
+ dcr-reg = <0x00e 0x002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460ex";
+ dcr-reg = <0x00c 0x002>;
+ };
+
+ CPM0: cpm {
+ compatible = "ibm,cpm";
+ dcr-access-method = "native";
+ dcr-reg = <0x160 0x003>;
+ unused-units = <0x00000100>;
+ idle-doze = <0x02000000>;
+ standby = <0xfeff791d>;
+ };
+
+ L2C0: l2c {
+ compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
+ dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */
+ 0x030 0x008>; /* L2 cache DCR's */
+ cache-line-size = <32>; /* 32 bytes */
+ cache-size = <262144>; /* L2, 256K */
+ interrupt-parent = <&UIC1>;
+ interrupts = <11 1>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460ex", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ CRYPTO: crypto@180000 {
+ compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
+ reg = <4 0x00180000 0x80400>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1d 0x4>;
+ };
+
+ HWRNG: hwrng@110000 {
+ compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
+ reg = <4 0x00110000 0x50>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <2>;
+ num-rx-chans = <16>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x3 0x4
+ /*TXDE*/ 0x4 0x4
+ /*RXDE*/ 0x5 0x4>;
+ };
+
+ USB0: ehci@bffd0400 {
+ compatible = "ibm,usb-ehci-460ex", "usb-ehci";
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x1d 4>;
+ reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
+ };
+
+ USB1: usb@bffd0000 {
+ compatible = "ohci-le";
+ reg = <4 0xbffd0000 0x60>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x1e 4>;
+ };
+
+ USBOTG0: usbotg@bff80000 {
+ compatible = "amcc,dwc-otg";
+ reg = <0x4 0xbff80000 0x10000>;
+ interrupt-parent = <&USBOTG0>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupts = <0x0 0x1 0x2>;
+ interrupt-map = </* USB-OTG */ 0x0 &UIC2 0x1c 0x4
+ /* HIGH-POWER */ 0x1 &UIC1 0x1a 0x8
+ /* DMA */ 0x2 &UIC0 0xc 0x4>;
+ };
+
+ SATA0: sata@bffd1000 {
+ compatible = "amcc,sata-460ex";
+ reg = <4 0xbffd1000 0x800 4 0xbffd0800 0x400>;
+ interrupt-parent = <&UIC3>;
+ interrupts = <0x0 0x4 /* SATA */
+ 0x5 0x4>; /* AHBDMA */
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460ex", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460ex", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ interrupts = <0x6 0x4>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl512n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0x00000000 0x00000000 0x04000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label = "ramdisk";
+ reg = <0x00200000 0x01400000>;
+ };
+ partition@1600000 {
+ label = "jffs2";
+ reg = <0x01600000 0x00400000>;
+ };
+ partition@1a00000 {
+ label = "user";
+ reg = <0x01a00000 0x02560000>;
+ };
+ partition@3f60000 {
+ label = "env";
+ reg = <0x03f60000 0x00040000>;
+ };
+ partition@3fa0000 {
+ label = "u-boot";
+ reg = <0x03fa0000 0x00060000>;
+ };
+ };
+
+ cpld@2,0 {
+ compatible = "amcc,ppc460ex-bcsr";
+ reg = <2 0x0 0x9>;
+ };
+
+ ndfc@3,0 {
+ compatible = "ibm,ndfc";
+ reg = <0x00000003 0x00000000 0x00002000>;
+ ccr = <0x00001000>;
+ bank-settings = <0x80002222>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@100000 {
+ label = "user";
+ reg = <0x00000000 0x03f00000>;
+ };
+ };
+ };
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ reg-shift = <0>;
+ compatible = "ns16550";
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1 0x4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ reg-shift = <0>;
+ compatible = "ns16550";
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1 0x4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-460ex", "ibm,iic";
+ reg = <0xef600700 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rtc@68 {
+ compatible = "stm,m41t80";
+ reg = <0x68>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x19 0x8>;
+ };
+ sttm@48 {
+ compatible = "ad,ad7414";
+ reg = <0x48>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x14 0x8>;
+ };
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-460ex", "ibm,iic";
+ reg = <0xef600800 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x3 0x4>;
+ };
+
+ GPIO0: gpio@ef600b00 {
+ compatible = "ibm,ppc4xx-gpio";
+ reg = <0xef600b00 0x00000048>;
+ gpio-controller;
+ };
+
+ ZMII0: emac-zmii@ef600d00 {
+ compatible = "ibm,zmii-460ex", "ibm,zmii";
+ reg = <0xef600d00 0x0000000c>;
+ };
+
+ RGMII0: emac-rgmii@ef601500 {
+ compatible = "ibm,rgmii-460ex", "ibm,rgmii";
+ reg = <0xef601500 0x00000008>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah-460ex", "ibm,tah";
+ reg = <0xef601350 0x00000030>;
+ };
+
+ TAH1: emac-tah@ef601450 {
+ compatible = "ibm,tah-460ex", "ibm,tah";
+ reg = <0xef601450 0x00000030>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-460ex", "ibm,emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+ /*Wake*/ 0x1 &UIC2 0x14 0x4>;
+ reg = <0xef600e00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-460ex", "ibm,emac4sync";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+ /*Wake*/ 0x1 &UIC2 0x15 0x4>;
+ reg = <0xef600f00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ tah-device = <&TAH1>;
+ tah-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+
+ PCIX0: pci@c0ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
+ 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
+ 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
+ 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 0 to 0x3f */
+ bus-range = <0x0 0x3f>;
+
+ /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
+ };
+
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <0x0>; /* port number */
+ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08010000 0x00001000>; /* Registers */
+ dcr-reg = <0x100 0x020>;
+ sdr-base = <0x300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 40 to 0x7f */
+ bus-range = <0x40 0x7f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <0x1>; /* port number */
+ reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08011000 0x00001000>; /* Registers */
+ dcr-reg = <0x120 0x020>;
+ sdr-base = <0x340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 80 to 0xbf */
+ bus-range = <0x80 0xbf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
+ };
+
+ MSI: ppc4xx-msi@C10000000 {
+ compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
+ reg = < 0xC 0x10000000 0x100>;
+ sdr-base = <0x36C>;
+ msi-data = <0x00000000>;
+ msi-mask = <0x44440000>;
+ interrupt-count = <3>;
+ interrupts = <0 1 2 3>;
+ interrupt-parent = <&UIC3>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = <0 &UIC3 0x18 1
+ 1 &UIC3 0x19 1
+ 2 &UIC3 0x1A 1
+ 3 &UIC3 0x1B 1>;
+ };
+ };
+};
diff --git a/arch/powerpc/dts/glacier.dts b/arch/powerpc/dts/glacier.dts
new file mode 100644
index 0000000..bb4e819
--- /dev/null
+++ b/arch/powerpc/dts/glacier.dts
@@ -0,0 +1,582 @@
+/*
+ * Device Tree Source for AMCC Glacier (460GT)
+ *
+ * Copyright 2008-2010 DENX Software Engineering, Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+/dts-v1/;
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ model = "amcc,glacier";
+ compatible = "amcc,glacier";
+ dcr-parent = <&{/cpus/cpu@0}>;
+
+ aliases {
+ ethernet0 = &EMAC0;
+ ethernet1 = &EMAC1;
+ ethernet2 = &EMAC2;
+ ethernet3 = &EMAC3;
+ serial0 = &UART0;
+ serial1 = &UART1;
+ };
+
+ chosen {
+ stdout-path = &UART0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ model = "PowerPC,460GT";
+ reg = <0x00000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ timebase-frequency = <0>; /* Filled in by U-Boot */
+ i-cache-line-size = <32>;
+ d-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ dcr-controller;
+ dcr-access-method = "native";
+ next-level-cache = <&L2C0>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
+ };
+
+ UIC0: interrupt-controller0 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <0>;
+ dcr-reg = <0x0c0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ };
+
+ UIC1: interrupt-controller1 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <1>;
+ dcr-reg = <0x0d0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC2: interrupt-controller2 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <2>;
+ dcr-reg = <0x0e0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ UIC3: interrupt-controller3 {
+ compatible = "ibm,uic-460gt","ibm,uic";
+ interrupt-controller;
+ cell-index = <3>;
+ dcr-reg = <0x0f0 0x009>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ #interrupt-cells = <2>;
+ interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
+ interrupt-parent = <&UIC0>;
+ };
+
+ SDR0: sdr {
+ compatible = "ibm,sdr-460gt";
+ dcr-reg = <0x00e 0x002>;
+ };
+
+ CPR0: cpr {
+ compatible = "ibm,cpr-460gt";
+ dcr-reg = <0x00c 0x002>;
+ };
+
+ L2C0: l2c {
+ compatible = "ibm,l2-cache-460gt", "ibm,l2-cache";
+ dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */
+ 0x030 0x008>; /* L2 cache DCR's */
+ cache-line-size = <32>; /* 32 bytes */
+ cache-size = <262144>; /* L2, 256K */
+ interrupt-parent = <&UIC1>;
+ interrupts = <11 1>;
+ };
+
+ plb {
+ compatible = "ibm,plb-460gt", "ibm,plb4";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ SDRAM0: sdram {
+ compatible = "ibm,sdram-460gt", "ibm,sdram-405gp";
+ dcr-reg = <0x010 0x002>;
+ };
+
+ CRYPTO: crypto@180000 {
+ compatible = "amcc,ppc460gt-crypto", "amcc,ppc460ex-crypto",
+ "amcc,ppc4xx-crypto";
+ reg = <4 0x00180000 0x80400>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1d 0x4>;
+ };
+
+ HWRNG: hwrng@110000 {
+ compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
+ reg = <4 0x00110000 0x50>;
+ };
+
+ MAL0: mcmal {
+ compatible = "ibm,mcmal-460gt", "ibm,mcmal2";
+ dcr-reg = <0x180 0x062>;
+ num-tx-chans = <4>;
+ num-rx-chans = <32>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-parent = <&UIC2>;
+ interrupts = < /*TXEOB*/ 0x6 0x4
+ /*RXEOB*/ 0x7 0x4
+ /*SERR*/ 0x3 0x4
+ /*TXDE*/ 0x4 0x4
+ /*RXDE*/ 0x5 0x4>;
+ desc-base-addr-high = <0x8>;
+ };
+
+ POB0: opb {
+ compatible = "ibm,opb-460gt", "ibm,opb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+
+ EBC0: ebc {
+ compatible = "ibm,ebc-460gt", "ibm,ebc";
+ dcr-reg = <0x012 0x002>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ /* ranges property is supplied by U-Boot */
+ interrupts = <0x6 0x4>;
+ interrupt-parent = <&UIC1>;
+
+ nor_flash@0,0 {
+ compatible = "amd,s29gl512n", "cfi-flash";
+ bank-width = <2>;
+ reg = <0x00000000 0x00000000 0x04000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "kernel";
+ reg = <0x00000000 0x001e0000>;
+ };
+ partition@1e0000 {
+ label = "dtb";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@200000 {
+ label = "ramdisk";
+ reg = <0x00200000 0x01400000>;
+ };
+ partition@1600000 {
+ label = "jffs2";
+ reg = <0x01600000 0x00400000>;
+ };
+ partition@1a00000 {
+ label = "user";
+ reg = <0x01a00000 0x02560000>;
+ };
+ partition@3f60000 {
+ label = "env";
+ reg = <0x03f60000 0x00040000>;
+ };
+ partition@3fa0000 {
+ label = "u-boot";
+ reg = <0x03fa0000 0x00060000>;
+ };
+ };
+
+ ndfc@3,0 {
+ compatible = "ibm,ndfc";
+ reg = <0x00000003 0x00000000 0x00002000>;
+ ccr = <0x00001000>;
+ bank-settings = <0x80002222>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ nand {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@100000 {
+ label = "user";
+ reg = <0x00000000 0x03f00000>;
+ };
+ };
+ };
+ };
+
+ UART0: serial@ef600300 {
+ device_type = "serial";
+ reg-shift = <0>;
+ compatible = "ns16550";
+ reg = <0xef600300 0x00000008>;
+ virtual-reg = <0xef600300>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x1 0x4>;
+ };
+
+ UART1: serial@ef600400 {
+ device_type = "serial";
+ reg-shift = <0>;
+ compatible = "ns16550";
+ reg = <0xef600400 0x00000008>;
+ virtual-reg = <0xef600400>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x1 0x4>;
+ };
+
+ UART2: serial@ef600500 {
+ device_type = "serial";
+ reg-shift = <0>;
+ compatible = "ns16550";
+ reg = <0xef600500 0x00000008>;
+ virtual-reg = <0xef600500>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <28 0x4>;
+ };
+
+ UART3: serial@ef600600 {
+ device_type = "serial";
+ reg-shift = <0>;
+ compatible = "ns16550";
+ reg = <0xef600600 0x00000008>;
+ virtual-reg = <0xef600600>;
+ clock-frequency = <0>; /* Filled in by U-Boot */
+ current-speed = <0>; /* Filled in by U-Boot */
+ interrupt-parent = <&UIC1>;
+ interrupts = <29 0x4>;
+ };
+
+ IIC0: i2c@ef600700 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <0xef600700 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x2 0x4>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rtc@68 {
+ compatible = "stm,m41t80";
+ reg = <0x68>;
+ interrupt-parent = <&UIC2>;
+ interrupts = <0x19 0x8>;
+ };
+ sttm@48 {
+ compatible = "ad,ad7414";
+ reg = <0x48>;
+ interrupt-parent = <&UIC1>;
+ interrupts = <0x14 0x8>;
+ };
+ };
+
+ IIC1: i2c@ef600800 {
+ compatible = "ibm,iic-460gt", "ibm,iic";
+ reg = <0xef600800 0x00000014>;
+ interrupt-parent = <&UIC0>;
+ interrupts = <0x3 0x4>;
+ };
+
+ ZMII0: emac-zmii@ef600d00 {
+ compatible = "ibm,zmii-460gt", "ibm,zmii";
+ reg = <0xef600d00 0x0000000c>;
+ };
+
+ RGMII0: emac-rgmii@ef601500 {
+ compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+ reg = <0xef601500 0x00000008>;
+ has-mdio;
+ };
+
+ RGMII1: emac-rgmii@ef601600 {
+ compatible = "ibm,rgmii-460gt", "ibm,rgmii";
+ reg = <0xef601600 0x00000008>;
+ has-mdio;
+ };
+
+ TAH0: emac-tah@ef601350 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <0xef601350 0x00000030>;
+ };
+
+ TAH1: emac-tah@ef601450 {
+ compatible = "ibm,tah-460gt", "ibm,tah";
+ reg = <0xef601450 0x00000030>;
+ };
+
+ EMAC0: ethernet@ef600e00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC0>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
+ /*Wake*/ 0x1 &UIC2 0x14 0x4>;
+ reg = <0xef600e00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <0>;
+ mal-rx-channel = <0>;
+ cell-index = <0>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <0>;
+ tah-device = <&TAH0>;
+ tah-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ };
+
+ EMAC1: ethernet@ef600f00 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC1>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
+ /*Wake*/ 0x1 &UIC2 0x15 0x4>;
+ reg = <0xef600f00 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <1>;
+ mal-rx-channel = <8>;
+ cell-index = <1>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII0>;
+ rgmii-channel = <1>;
+ tah-device = <&TAH1>;
+ tah-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC2: ethernet@ef601100 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC2>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x12 0x4
+ /*Wake*/ 0x1 &UIC2 0x16 0x4>;
+ reg = <0xef601100 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <2>;
+ mal-rx-channel = <16>;
+ cell-index = <2>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII1>;
+ rgmii-channel = <0>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+
+ EMAC3: ethernet@ef601200 {
+ device_type = "network";
+ compatible = "ibm,emac-460gt", "ibm,emac4sync";
+ interrupt-parent = <&EMAC3>;
+ interrupts = <0x0 0x1>;
+ #interrupt-cells = <1>;
+ #address-cells = <0>;
+ #size-cells = <0>;
+ interrupt-map = </*Status*/ 0x0 &UIC2 0x13 0x4
+ /*Wake*/ 0x1 &UIC2 0x17 0x4>;
+ reg = <0xef601200 0x000000c4>;
+ local-mac-address = [000000000000]; /* Filled in by U-Boot */
+ mal-device = <&MAL0>;
+ mal-tx-channel = <3>;
+ mal-rx-channel = <24>;
+ cell-index = <3>;
+ max-frame-size = <9000>;
+ rx-fifo-size = <4096>;
+ tx-fifo-size = <2048>;
+ rx-fifo-size-gige = <16384>;
+ tx-fifo-size-gige = <16384>; /* emac2&3 only */
+ phy-mode = "rgmii";
+ phy-map = <0x00000000>;
+ rgmii-device = <&RGMII1>;
+ rgmii-channel = <1>;
+ has-inverted-stacr-oc;
+ has-new-stacr-staopc;
+ mdio-device = <&EMAC0>;
+ };
+ };
+
+ PCIX0: pci@c0ec00000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pcix-460gt", "ibm,plb-pcix";
+ primary;
+ large-inbound-windows;
+ enable-msi-hole;
+ reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
+ 0x00000000 0x00000000 0x00000000 /* no IACK cycles */
+ 0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
+ 0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
+ 0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
+ 0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 0 to 0x3f */
+ bus-range = <0x0 0x3f>;
+
+ /* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
+ };
+
+ PCIE0: pciex@d00000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <0x0>; /* port number */
+ reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08010000 0x00001000>; /* Registers */
+ dcr-reg = <0x100 0x020>;
+ sdr-base = <0x300>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 40 to 0x7f */
+ bus-range = <0x40 0x7f>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
+ };
+
+ PCIE1: pciex@d20000000 {
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
+ primary;
+ port = <0x1>; /* port number */
+ reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
+ 0x0000000c 0x08011000 0x00001000>; /* Registers */
+ dcr-reg = <0x120 0x020>;
+ sdr-base = <0x340>;
+
+ /* Outbound ranges, one memory and one IO,
+ * later cannot be changed
+ */
+ ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
+ 0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
+
+ /* Inbound 2GB range starting at 0 */
+ dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
+
+ /* This drives busses 80 to 0xbf */
+ bus-range = <0x80 0xbf>;
+
+ /* Legacy interrupts (note the weird polarity, the bridge seems
+ * to invert PCIe legacy interrupts).
+ * We are de-swizzling here because the numbers are actually for
+ * port of the root complex virtual P2P bridge. But I want
+ * to avoid putting a node for it in the tree, so the numbers
+ * below are basically de-swizzled numbers.
+ * The real slot is on idsel 0, so the swizzling is 1:1
+ */
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <
+ 0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
+ 0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
+ 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
+ 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
+ };
+ };
+};
diff --git a/arch/powerpc/include/asm/arch-ppc4xx/gpio.h b/arch/powerpc/include/asm/arch-ppc4xx/gpio.h
new file mode 100644
index 0000000..3d960c3
--- /dev/null
+++ b/arch/powerpc/include/asm/arch-ppc4xx/gpio.h
@@ -0,0 +1,7 @@
+/*
+ * (C) Copyright 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/* This is empty for now as we don't support the generic GPIO interface */
diff --git a/arch/powerpc/include/asm/linkage.h b/arch/powerpc/include/asm/linkage.h
new file mode 100644
index 0000000..559b42e
--- /dev/null
+++ b/arch/powerpc/include/asm/linkage.h
@@ -0,0 +1,7 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/* We don't need anything here at present */
diff --git a/arch/powerpc/include/asm/ppc460ex_gt.h b/arch/powerpc/include/asm/ppc460ex_gt.h
index f41df0d..ea019aa 100644
--- a/arch/powerpc/include/asm/ppc460ex_gt.h
+++ b/arch/powerpc/include/asm/ppc460ex_gt.h
@@ -19,10 +19,12 @@
/* Memory mapped registers */
#define CONFIG_SYS_PERIPHERAL_BASE 0xef600000 /* Internal Peripherals */
+#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_PERIPHERAL_BASE + 0x0300)
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_PERIPHERAL_BASE + 0x0400)
#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_PERIPHERAL_BASE + 0x0500)
#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_PERIPHERAL_BASE + 0x0600)
+#endif
#define GPIO0_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0b00)
#define GPIO1_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x0c00)
diff --git a/arch/sandbox/Kconfig b/arch/sandbox/Kconfig
index 3057325..2098b9c 100644
--- a/arch/sandbox/Kconfig
+++ b/arch/sandbox/Kconfig
@@ -10,4 +10,28 @@ config SYS_BOARD
config SYS_CONFIG_NAME
default "sandbox"
+config DM
+ default y
+
+config DM_GPIO
+ default y
+
+config DM_SERIAL
+ default y
+
+config DM_CROS_EC
+ default y
+
+config DM_SPI
+ default y
+
+config DM_SPI_FLASH
+ default y
+
+config DM_I2C
+ default y
+
+config DM_TEST
+ default y
+
endmenu
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index fef11f3..35d24e4 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -67,6 +67,21 @@ config TARGET_GALILEO
endchoice
+config DM
+ default y
+
+config DM_GPIO
+ default y
+
+config DM_SERIAL
+ default y
+
+config SYS_MALLOC_F
+ default y
+
+config SYS_MALLOC_F_LEN
+ default 0x800
+
config RAMBASE
hex
default 0x100000
diff --git a/board/amcc/canyonlands/Kconfig b/board/amcc/canyonlands/Kconfig
index 530a6ef..848e08f 100644
--- a/board/amcc/canyonlands/Kconfig
+++ b/board/amcc/canyonlands/Kconfig
@@ -9,4 +9,42 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "canyonlands"
+choice BOARD_TYPE
+ prompt "Select which board to build for"
+
+config CANYONLANDS
+ bool "Glacier"
+ help
+ Select this to build for the Canyonlands 460EX board.
+
+config GLACIER
+ bool "Glacier"
+ help
+ Select this to build for the Glacier 460GT board.
+
+config ARCHES
+ bool "Arches"
+ help
+ Select this to build for the Arches dual 460GT board.
+
+endchoice
+
+config DISPLAY_BOARDINFO
+ bool
+ default y
+
+config DM
+ default y
+
+config DM_SERIAL
+ default y
+
+config SYS_MALLOC_F
+ bool
+ default y
+
+config SYS_MALLOC_F_LEN
+ hex
+ default 0x400
+
endif
diff --git a/board/amcc/canyonlands/MAINTAINERS b/board/amcc/canyonlands/MAINTAINERS
index 52bf004..8be8a52 100644
--- a/board/amcc/canyonlands/MAINTAINERS
+++ b/board/amcc/canyonlands/MAINTAINERS
@@ -6,3 +6,4 @@ F: include/configs/canyonlands.h
F: configs/arches_defconfig
F: configs/canyonlands_defconfig
F: configs/glacier_defconfig
+F: configs/glacier_ramboot_defconfig
diff --git a/board/amcc/canyonlands/config.mk b/board/amcc/canyonlands/config.mk
index 63b8973..5cc90d2 100644
--- a/board/amcc/canyonlands/config.mk
+++ b/board/amcc/canyonlands/config.mk
@@ -8,8 +8,6 @@
# AMCC 460EX/460GT Evaluation Board (Canyonlands) board
#
-PLATFORM_CPPFLAGS += -DCONFIG_440=1
-
ifeq ($(debug),1)
PLATFORM_CPPFLAGS += -DDEBUG
endif
diff --git a/board/amcc/canyonlands/u-boot-ram.lds b/board/amcc/canyonlands/u-boot-ram.lds
new file mode 100644
index 0000000..1750c74
--- /dev/null
+++ b/board/amcc/canyonlands/u-boot-ram.lds
@@ -0,0 +1,85 @@
+/*
+ * (C) Copyright 2009
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .text :
+ {
+ _image_copy_start = .;
+ arch/powerpc/cpu/ppc4xx/start.o (.text*)
+ board/amcc/canyonlands/init.o (.text*)
+
+ *(.text*)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
+ }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ KEEP(*(.got))
+ _GOT2_TABLE_ = .;
+ KEEP(*(.got2))
+ _FIXUP_TABLE_ = .;
+ KEEP(*(.fixup))
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data*)
+ *(.sdata*)
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ . = .;
+
+ .u_boot_list : {
+ KEEP(*(SORT(.u_boot_list*)));
+ }
+
+ . = .;
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : {
+ *(.data.init)
+ . = ALIGN(256);
+ LONG(0) LONG(0) /* Extend u-boot.bin to here */
+ }
+ __init_end = .;
+ _end = .;
+ _image_binary_end = .;
+
+ __bss_start = .;
+ .bss (NOLOAD) :
+ {
+ *(.bss*)
+ *(.sbss*)
+ *(COMMON)
+ . = ALIGN(4);
+ }
+
+ __bss_end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/compulab/cm_t335/Kconfig b/board/compulab/cm_t335/Kconfig
index 683efde..aadbfbc 100644
--- a/board/compulab/cm_t335/Kconfig
+++ b/board/compulab/cm_t335/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "cm_t335"
+config DM
+ default y if !SPL_BUILD
+
+config DM_GPIO
+ default y if !SPL_BUILD
+
+config DM_SERIAL
+ default y if !SPL_BUILD
+
endif
diff --git a/board/gumstix/pepper/Kconfig b/board/gumstix/pepper/Kconfig
index 6f94612..3099a9e 100644
--- a/board/gumstix/pepper/Kconfig
+++ b/board/gumstix/pepper/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "pepper"
+config DM
+ default y if !SPL_BUILD
+
+config DM_GPIO
+ default y if !SPL_BUILD
+
+config DM_SERIAL
+ default y if !SPL_BUILD
+
endif
diff --git a/board/isee/igep0033/Kconfig b/board/isee/igep0033/Kconfig
index e989e4b..2fe2ef1 100644
--- a/board/isee/igep0033/Kconfig
+++ b/board/isee/igep0033/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "am335x_igep0033"
+config DM
+ default y if !SPL_BUILD
+
+config DM_GPIO
+ default y if !SPL_BUILD
+
+config DM_SERIAL
+ default y if !SPL_BUILD
+
endif
diff --git a/board/phytec/pcm051/Kconfig b/board/phytec/pcm051/Kconfig
index 2cc0d88..65094cf 100644
--- a/board/phytec/pcm051/Kconfig
+++ b/board/phytec/pcm051/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "pcm051"
+config DM
+ default y if !SPL_BUILD
+
+config DM_GPIO
+ default y if !SPL_BUILD
+
+config DM_SERIAL
+ default y if !SPL_BUILD
+
endif
diff --git a/board/renesas/silk/Kconfig b/board/renesas/silk/Kconfig
new file mode 100644
index 0000000..07aee0e
--- /dev/null
+++ b/board/renesas/silk/Kconfig
@@ -0,0 +1,12 @@
+if TARGET_SILK
+
+config SYS_BOARD
+ default "silk"
+
+config SYS_VENDOR
+ default "renesas"
+
+config SYS_CONFIG_NAME
+ default "silk"
+
+endif
diff --git a/board/renesas/silk/MAINTAINERS b/board/renesas/silk/MAINTAINERS
new file mode 100644
index 0000000..b566ccf
--- /dev/null
+++ b/board/renesas/silk/MAINTAINERS
@@ -0,0 +1,6 @@
+SILK BOARD
+M: Cogent Embedded, Inc. <source@cogentembedded.com>
+S: Maintained
+F: board/renesas/silk/
+F: include/configs/silk.h
+F: configs/silk_defconfig
diff --git a/board/renesas/silk/Makefile b/board/renesas/silk/Makefile
new file mode 100644
index 0000000..e6eea61
--- /dev/null
+++ b/board/renesas/silk/Makefile
@@ -0,0 +1,10 @@
+#
+# board/renesas/silk/Makefile
+#
+# Copyright (C) 2015 Renesas Electronics Corporation
+# Copyright (C) 2015 Cogent Embedded, Inc.
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-y := silk.o qos.o ../rcar-gen2-common/common.o
diff --git a/board/renesas/silk/qos.c b/board/renesas/silk/qos.c
new file mode 100644
index 0000000..4f6e46c
--- /dev/null
+++ b/board/renesas/silk/qos.c
@@ -0,0 +1,951 @@
+/*
+ * board/renesas/silk/qos.c
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ *
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/arch/rmobile.h>
+
+#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
+/* QoS version 0.11 */
+
+enum {
+ DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04,
+ DBSC3_05, DBSC3_06, DBSC3_07, DBSC3_08, DBSC3_09,
+ DBSC3_10, DBSC3_11, DBSC3_12, DBSC3_13, DBSC3_14,
+ DBSC3_15,
+ DBSC3_NR,
+};
+
+static u32 dbsc3_0_r_qos_addr[DBSC3_NR] = {
+ [DBSC3_00] = DBSC3_0_QOS_R0_BASE,
+ [DBSC3_01] = DBSC3_0_QOS_R1_BASE,
+ [DBSC3_02] = DBSC3_0_QOS_R2_BASE,
+ [DBSC3_03] = DBSC3_0_QOS_R3_BASE,
+ [DBSC3_04] = DBSC3_0_QOS_R4_BASE,
+ [DBSC3_05] = DBSC3_0_QOS_R5_BASE,
+ [DBSC3_06] = DBSC3_0_QOS_R6_BASE,
+ [DBSC3_07] = DBSC3_0_QOS_R7_BASE,
+ [DBSC3_08] = DBSC3_0_QOS_R8_BASE,
+ [DBSC3_09] = DBSC3_0_QOS_R9_BASE,
+ [DBSC3_10] = DBSC3_0_QOS_R10_BASE,
+ [DBSC3_11] = DBSC3_0_QOS_R11_BASE,
+ [DBSC3_12] = DBSC3_0_QOS_R12_BASE,
+ [DBSC3_13] = DBSC3_0_QOS_R13_BASE,
+ [DBSC3_14] = DBSC3_0_QOS_R14_BASE,
+ [DBSC3_15] = DBSC3_0_QOS_R15_BASE,
+};
+
+static u32 dbsc3_0_w_qos_addr[DBSC3_NR] = {
+ [DBSC3_00] = DBSC3_0_QOS_W0_BASE,
+ [DBSC3_01] = DBSC3_0_QOS_W1_BASE,
+ [DBSC3_02] = DBSC3_0_QOS_W2_BASE,
+ [DBSC3_03] = DBSC3_0_QOS_W3_BASE,
+ [DBSC3_04] = DBSC3_0_QOS_W4_BASE,
+ [DBSC3_05] = DBSC3_0_QOS_W5_BASE,
+ [DBSC3_06] = DBSC3_0_QOS_W6_BASE,
+ [DBSC3_07] = DBSC3_0_QOS_W7_BASE,
+ [DBSC3_08] = DBSC3_0_QOS_W8_BASE,
+ [DBSC3_09] = DBSC3_0_QOS_W9_BASE,
+ [DBSC3_10] = DBSC3_0_QOS_W10_BASE,
+ [DBSC3_11] = DBSC3_0_QOS_W11_BASE,
+ [DBSC3_12] = DBSC3_0_QOS_W12_BASE,
+ [DBSC3_13] = DBSC3_0_QOS_W13_BASE,
+ [DBSC3_14] = DBSC3_0_QOS_W14_BASE,
+ [DBSC3_15] = DBSC3_0_QOS_W15_BASE,
+};
+
+void qos_init(void)
+{
+ int i;
+ struct rcar_s3c *s3c;
+ struct rcar_s3c_qos *s3c_qos;
+ struct rcar_dbsc3_qos *qos_addr;
+ struct rcar_mxi *mxi;
+ struct rcar_mxi_qos *mxi_qos;
+ struct rcar_axi_qos *axi_qos;
+
+ /* DBSC DBADJ2 */
+ writel(0x20042004, DBSC3_0_DBADJ2);
+
+ /* S3C -QoS */
+ s3c = (struct rcar_s3c *)S3C_BASE;
+ writel(0x1F0D0B0A, &s3c->s3crorr);
+ writel(0x1F0D0B09, &s3c->s3cworr);
+
+ /* QoS Control Registers */
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI0_BASE;
+ writel(0x00890089, &s3c_qos->s3cqos0);
+ writel(0x20960010, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA2200, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960010, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA2200, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI1_BASE;
+ writel(0x00890089, &s3c_qos->s3cqos0);
+ writel(0x20960010, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA2200, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960010, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA2200, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_MXI_BASE;
+ writel(0x80928092, &s3c_qos->s3cqos0);
+ writel(0x20960020, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA20DC, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960020, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA20DC, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_AXI_BASE;
+ writel(0x00820082, &s3c_qos->s3cqos0);
+ writel(0x20960020, &s3c_qos->s3cqos1);
+ writel(0x20302030, &s3c_qos->s3cqos2);
+ writel(0x20AA20FA, &s3c_qos->s3cqos3);
+ writel(0x00002032, &s3c_qos->s3cqos4);
+ writel(0x20960020, &s3c_qos->s3cqos5);
+ writel(0x20302030, &s3c_qos->s3cqos6);
+ writel(0x20AA20FA, &s3c_qos->s3cqos7);
+ writel(0x00002032, &s3c_qos->s3cqos8);
+
+ /* DBSC -QoS */
+ /* DBSC0 - Read */
+ for (i = DBSC3_00; i < DBSC3_NR; i++) {
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_r_qos_addr[i];
+ writel(0x00000002, &qos_addr->dblgcnt);
+ writel(0x0000207D, &qos_addr->dbtmval0);
+ writel(0x00002053, &qos_addr->dbtmval1);
+ writel(0x0000202A, &qos_addr->dbtmval2);
+ writel(0x00001FBD, &qos_addr->dbtmval3);
+ writel(0x00000001, &qos_addr->dbrqctr);
+ writel(0x00002064, &qos_addr->dbthres0);
+ writel(0x0000203E, &qos_addr->dbthres1);
+ writel(0x00002019, &qos_addr->dbthres2);
+ writel(0x00000001, &qos_addr->dblgqon);
+ }
+
+ /* DBSC0 - Write */
+ for (i = DBSC3_00; i < DBSC3_NR; i++) {
+ qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_w_qos_addr[i];
+ writel(0x00000002, &qos_addr->dblgcnt);
+ writel(0x0000207D, &qos_addr->dbtmval0);
+ writel(0x00002053, &qos_addr->dbtmval1);
+ writel(0x00002043, &qos_addr->dbtmval2);
+ writel(0x00002030, &qos_addr->dbtmval3);
+ writel(0x00000001, &qos_addr->dbrqctr);
+ writel(0x00002064, &qos_addr->dbthres0);
+ writel(0x0000203E, &qos_addr->dbthres1);
+ writel(0x00002031, &qos_addr->dbthres2);
+ writel(0x00000001, &qos_addr->dblgqon);
+ }
+
+ /* CCI-400 -QoS */
+ writel(0x20000800, CCI_400_MAXOT_1);
+ writel(0x20000800, CCI_400_MAXOT_2);
+ writel(0x0000000C, CCI_400_QOSCNTL_1);
+ writel(0x0000000C, CCI_400_QOSCNTL_2);
+
+ /* MXI -QoS */
+ /* Transaction Control (MXI) */
+ mxi = (struct rcar_mxi *)MXI_BASE;
+ writel(0x00000013, &mxi->mxrtcr);
+ writel(0x00000013, &mxi->mxwtcr);
+ writel(0x00780080, &mxi->mxsaar0);
+ writel(0x02000800, &mxi->mxsaar1);
+
+ /* QoS Control (MXI) */
+ mxi_qos = (struct rcar_mxi_qos *)MXI_QOS_BASE;
+ writel(0x0000000C, &mxi_qos->vspdu0);
+ writel(0x0000000E, &mxi_qos->du0);
+
+ /* AXI -QoS */
+ /* Transaction Control (MXI) */
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SYX64TO128_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_AVB_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX0_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX1_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX2_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_LBS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUDS_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUM_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_RTX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB20_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB22_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_AX2M_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CC50_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002029, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CCI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_CS_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_DDM_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_ETH_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_MPXM_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000214C, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_TRAB_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x000020A6, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM0_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM1_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (RT-AXI) */
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_SHX_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_DBG_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_RTX64TO128_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)RT_AXI_SY2RT_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (MP-AXI) */
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ADSP_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002037, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000040, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002014, &axi_qos->qosctset0);
+ writel(0x00000040, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_MLP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00001FF0, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00002001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_MMUMP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_SPU_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x00002053, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MP_AXI_SPUC_BASE;
+ writel(0x00000000, &axi_qos->qosconf);
+ writel(0x0000206E, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (SYS-AXI256) */
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_AXI128TO256_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_SYX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MPX_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MXI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020EB, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (CCI-AXI) */
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS0_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_SYX2_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUDS_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUM_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MXI_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x00002245, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS1_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUMP_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002004, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000000, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ /* QoS Register (Media-AXI) */
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXR_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020DC, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x000020AA, &axi_qos->qosthres0);
+ writel(0x00002032, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXW_BASE;
+ writel(0x00000002, &axi_qos->qosconf);
+ writel(0x000020DC, &axi_qos->qosctset0);
+ writel(0x00002096, &axi_qos->qosctset1);
+ writel(0x00002030, &axi_qos->qosctset2);
+ writel(0x00002030, &axi_qos->qosctset3);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x000020AA, &axi_qos->qosthres0);
+ writel(0x00002032, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002190, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VIN0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00001FF0, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00002001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1W_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0R_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0W_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x000020C8, &axi_qos->qosctset0);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0R_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x00002063, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0W_BASE;
+ writel(0x00000003, &axi_qos->qosconf);
+ writel(0x00002063, &axi_qos->qosctset0);
+ writel(0x00000001, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VR_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VW_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00000001, &axi_qos->qosthres0);
+ writel(0x00000001, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+
+ axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC0R_BASE;
+ writel(0x00000001, &axi_qos->qosconf);
+ writel(0x00002073, &axi_qos->qosctset0);
+ writel(0x00000020, &axi_qos->qosreqctr);
+ writel(0x00002064, &axi_qos->qosthres0);
+ writel(0x00002004, &axi_qos->qosthres1);
+ writel(0x00000001, &axi_qos->qosthres2);
+ writel(0x00000001, &axi_qos->qosqon);
+}
+#else /* CONFIG_RMOBILE_EXTRAM_BOOT */
+void qos_init(void)
+{
+}
+#endif /* CONFIG_RMOBILE_EXTRAM_BOOT */
diff --git a/board/renesas/silk/qos.h b/board/renesas/silk/qos.h
new file mode 100644
index 0000000..75a20bb
--- /dev/null
+++ b/board/renesas/silk/qos.h
@@ -0,0 +1,13 @@
+/*
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __QOS_H__
+#define __QOS_H__
+
+void qos_init(void);
+
+#endif
diff --git a/board/renesas/silk/silk.c b/board/renesas/silk/silk.c
new file mode 100644
index 0000000..dfd9a9d
--- /dev/null
+++ b/board/renesas/silk/silk.c
@@ -0,0 +1,163 @@
+/*
+ * board/renesas/silk/silk.c
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/arch/rmobile.h>
+#include <asm/arch/rcar-mstp.h>
+#include <asm/arch/mmc.h>
+#include <netdev.h>
+#include <miiphy.h>
+#include <i2c.h>
+#include <div64.h>
+#include "qos.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CLK2MHZ(clk) (clk / 1000 / 1000)
+void s_init(void)
+{
+ struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE;
+ struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE;
+
+ /* Watchdog init */
+ writel(0xA5A5A500, &rwdt->rwtcsra);
+ writel(0xA5A5A500, &swdt->swtcsra);
+
+ /* QoS */
+ qos_init();
+}
+
+#define TMU0_MSTP125 (1 << 25)
+#define SCIF2_MSTP719 (1 << 19)
+#define ETHER_MSTP813 (1 << 13)
+#define IIC1_MSTP323 (1 << 23)
+#define MMC0_MSTP315 (1 << 15)
+
+int board_early_init_f(void)
+{
+ /* TMU */
+ mstp_clrbits_le32(MSTPSR1, SMSTPCR1, TMU0_MSTP125);
+
+ /* SCIF2 */
+ mstp_clrbits_le32(MSTPSR7, SMSTPCR7, SCIF2_MSTP719);
+
+ /* ETHER */
+ mstp_clrbits_le32(MSTPSR8, SMSTPCR8, ETHER_MSTP813);
+
+ /* IIC1 / sh-i2c ch1 */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, IIC1_MSTP323);
+
+#ifdef CONFIG_SH_MMCIF
+ /* MMC */
+ mstp_clrbits_le32(MSTPSR3, SMSTPCR3, MMC0_MSTP315);
+#endif
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+ /* Init PFC controller */
+ r8a7794_pinmux_init();
+
+ /* Ether Enable */
+ gpio_request(GPIO_FN_ETH_CRS_DV, NULL);
+ gpio_request(GPIO_FN_ETH_RX_ER, NULL);
+ gpio_request(GPIO_FN_ETH_RXD0, NULL);
+ gpio_request(GPIO_FN_ETH_RXD1, NULL);
+ gpio_request(GPIO_FN_ETH_LINK, NULL);
+ gpio_request(GPIO_FN_ETH_REFCLK, NULL);
+ gpio_request(GPIO_FN_ETH_MDIO, NULL);
+ gpio_request(GPIO_FN_ETH_TXD1, NULL);
+ gpio_request(GPIO_FN_ETH_TX_EN, NULL);
+ gpio_request(GPIO_FN_ETH_MAGIC, NULL);
+ gpio_request(GPIO_FN_ETH_TXD0, NULL);
+ gpio_request(GPIO_FN_ETH_MDC, NULL);
+ gpio_request(GPIO_FN_IRQ8, NULL);
+
+ /* PHY reset */
+ gpio_request(GPIO_GP_1_24, NULL);
+ gpio_direction_output(GPIO_GP_1_24, 0);
+ mdelay(20);
+ gpio_set_value(GPIO_GP_1_24, 1);
+ udelay(1);
+
+ return 0;
+}
+
+#define CXR24 0xEE7003C0 /* MAC address high register */
+#define CXR25 0xEE7003C8 /* MAC address low register */
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_SH_ETHER
+ int ret = -ENODEV;
+ u32 val;
+ unsigned char enetaddr[6];
+
+ ret = sh_eth_initialize(bis);
+ if (!eth_getenv_enetaddr("ethaddr", enetaddr))
+ return ret;
+
+ /* Set Mac address */
+ val = enetaddr[0] << 24 | enetaddr[1] << 16 |
+ enetaddr[2] << 8 | enetaddr[3];
+ writel(val, CXR24);
+
+ val = enetaddr[4] << 8 | enetaddr[5];
+ writel(val, CXR25);
+
+ return ret;
+#else
+ return 0;
+#endif
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ int ret = 0;
+
+#ifdef CONFIG_SH_MMCIF
+ /* MMC0 */
+ gpio_request(GPIO_GP_4_31, NULL);
+ gpio_set_value(GPIO_GP_4_31, 1);
+
+ ret = mmcif_mmc_init();
+#endif
+ return ret;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+ return 0;
+}
+
+const struct rmobile_sysinfo sysinfo = {
+ CONFIG_RMOBILE_BOARD_STRING
+};
+
+void reset_cpu(ulong addr)
+{
+ u8 val;
+
+ i2c_set_bus_num(1); /* PowerIC connected to ch1 */
+ i2c_read(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
+ val |= 0x02;
+ i2c_write(CONFIG_SYS_I2C_POWERIC_ADDR, 0x13, 1, &val, 1);
+}
diff --git a/board/samsung/goni/Kconfig b/board/samsung/goni/Kconfig
index cbbf5a9..2c5d3fc 100644
--- a/board/samsung/goni/Kconfig
+++ b/board/samsung/goni/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "s5p_goni"
+config DM
+ default y if !SPL_BUILD
+
+config DM_GPIO
+ default y if !SPL_BUILD
+
+config DM_SERIAL
+ default y if !SPL_BUILD
+
endif
diff --git a/board/samsung/smdk5420/Kconfig b/board/samsung/smdk5420/Kconfig
index a9d62ff..576abae 100644
--- a/board/samsung/smdk5420/Kconfig
+++ b/board/samsung/smdk5420/Kconfig
@@ -22,6 +22,9 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "peach-pi"
+config DM_CROS_EC
+ default y
+
endif
if TARGET_PEACH_PIT
@@ -35,6 +38,9 @@ config SYS_VENDOR
config SYS_CONFIG_NAME
default "peach-pit"
+config DM_CROS_EC
+ default y
+
endif
if TARGET_SMDK5420
diff --git a/board/samsung/smdkc100/Kconfig b/board/samsung/smdkc100/Kconfig
index d2157b4..996fe3c 100644
--- a/board/samsung/smdkc100/Kconfig
+++ b/board/samsung/smdkc100/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "smdkc100"
+config DM
+ default y if !SPL_BUILD
+
+config DM_GPIO
+ default y if !SPL_BUILD
+
+config DM_SERIAL
+ default y if !SPL_BUILD
+
endif
diff --git a/board/silica/pengwyn/Kconfig b/board/silica/pengwyn/Kconfig
index f2e1098..6ecda80 100644
--- a/board/silica/pengwyn/Kconfig
+++ b/board/silica/pengwyn/Kconfig
@@ -12,4 +12,13 @@ config SYS_SOC
config SYS_CONFIG_NAME
default "pengwyn"
+config DM
+ default y if !SPL_BUILD
+
+config DM_GPIO
+ default y if !SPL_BUILD
+
+config DM_SERIAL
+ default y if !SPL_BUILD
+
endif
diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig
index 1ddbb2c..a20e0c1 100644
--- a/board/ti/am335x/Kconfig
+++ b/board/ti/am335x/Kconfig
@@ -37,4 +37,20 @@ config NOR_BOOT
booted via NOR. In this case we will enable certain pinmux early
as the ROM only partially sets up pinmux. We also default to using
NOR for environment.
+
+config DM
+ default y if !SPL_BUILD
+
+config DM_GPIO
+ default y if DM && !SPL_BUILD
+
+config DM_SERIAL
+ default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F
+ default y if DM && !SPL_BUILD
+
+config SYS_MALLOC_F_LEN
+ default 0x400 if DM && !SPL_BUILD
+
endif
diff --git a/common/Kconfig b/common/Kconfig
index fd84fa0..2ca002d 100644
--- a/common/Kconfig
+++ b/common/Kconfig
@@ -153,6 +153,29 @@ endmenu
menu "Device access commands"
+config CMD_DM
+ bool "dm - Access to driver model information"
+ depends on DM
+ default y
+ help
+ Provides access to driver model data structures and information,
+ such as a list of devices, list of uclasses and the state of each
+ device (e.g. activated). This is not required for operation, but
+ can be useful to see the state of driver model for debugging or
+ interest.
+
+config CMD_DEMO
+ bool "demo - Demonstration commands for driver model"
+ depends on DM
+ help
+ Provides a 'demo' command which can be used to play around with
+ driver model. To use this properly you will need to enable one or
+ both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE).
+ Otherwise you will always get an empty list of devices. The demo
+ devices are defined in the sandbox device tree, so the easiest
+ option is to use sandbox and pass the -d point to sandbox's
+ u-boot.dtb file.
+
config CMD_LOADB
bool "loadb"
help
diff --git a/common/board_f.c b/common/board_f.c
index bdad36b..2c10215 100644
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -1075,4 +1075,22 @@ void board_init_f_r(void)
/* NOTREACHED - board_init_r() does not return */
hang();
}
+#else
+ulong board_init_f_mem(ulong top)
+{
+ /* Leave space for the stack we are running with now */
+ top -= 0x40;
+
+ top -= sizeof(struct global_data);
+ top = ALIGN(top, 16);
+ gd = (struct global_data *)top;
+ memset((void *)gd, '\0', sizeof(*gd));
+
+#ifdef CONFIG_SYS_MALLOC_F_LEN
+ top -= CONFIG_SYS_MALLOC_F_LEN;
+ gd->malloc_base = top;
+#endif
+
+ return top;
+}
#endif /* CONFIG_X86 */
diff --git a/common/cmd_demo.c b/common/cmd_demo.c
index bcb34d9..8a10bdf 100644
--- a/common/cmd_demo.c
+++ b/common/cmd_demo.c
@@ -97,7 +97,9 @@ static int do_demo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
ARRAY_SIZE(demo_commands));
argc -= 2;
argv += 2;
- if (!demo_cmd || argc > demo_cmd->maxargs)
+
+ if ((!demo_cmd || argc > demo_cmd->maxargs) ||
+ ((demo_cmd->name[0] != 'l') && (argc < 1)))
return CMD_RET_USAGE;
if (argc) {
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 7c3ad00..fe8f77a 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -1730,7 +1730,7 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const
#endif
if (argc == 1) {
#ifdef CONFIG_DM_I2C
- speed = i2c_get_bus_speed(bus);
+ speed = dm_i2c_get_bus_speed(bus);
#else
speed = i2c_get_bus_speed();
#endif
@@ -1740,7 +1740,7 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const
speed = simple_strtoul(argv[1], NULL, 10);
printf("Setting bus speed to %d Hz\n", speed);
#ifdef CONFIG_DM_I2C
- ret = i2c_set_bus_speed(bus, speed);
+ ret = dm_i2c_set_bus_speed(bus, speed);
#else
ret = i2c_set_bus_speed(speed);
#endif
diff --git a/common/malloc_simple.c b/common/malloc_simple.c
index afdacff..64ae036 100644
--- a/common/malloc_simple.c
+++ b/common/malloc_simple.c
@@ -19,7 +19,7 @@ void *malloc_simple(size_t bytes)
new_ptr = gd->malloc_ptr + bytes;
if (new_ptr > gd->malloc_limit)
- panic("Out of pre-reloc memory");
+ return NULL;
ptr = map_sysmem(gd->malloc_base + gd->malloc_ptr, bytes);
gd->malloc_ptr = ALIGN(new_ptr, sizeof(new_ptr));
return ptr;
diff --git a/configs/Linksprite_pcDuino3_fdt_defconfig b/configs/Linksprite_pcDuino3_fdt_defconfig
index 3b6dfa6..1e749cd 100644
--- a/configs/Linksprite_pcDuino3_fdt_defconfig
+++ b/configs/Linksprite_pcDuino3_fdt_defconfig
@@ -2,6 +2,8 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,AHCI,SATAPWR=SUNXI_GPH(2),USB_EHCI"
CONFIG_FDTFILE="sun7i-a20-pcduino3.dtb"
CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-pcduino3"
CONFIG_OF_CONTROL=y
CONFIG_OF_SEPARATE=y
@@ -11,3 +13,5 @@ CONFIG_OF_SEPARATE=y
+S:CONFIG_DRAM_CLK=480
+S:CONFIG_DRAM_ZQ=122
+S:CONFIG_DRAM_EMR1=4
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/am335x_igep0033_defconfig b/configs/am335x_igep0033_defconfig
index 23f0a32..f3544b5 100644
--- a/configs/am335x_igep0033_defconfig
+++ b/configs/am335x_igep0033_defconfig
@@ -1,3 +1,5 @@
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_AM335X_IGEP0033=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/am3517_crane_defconfig b/configs/am3517_crane_defconfig
index cf9d8c7..33b63c7 100644
--- a/configs/am3517_crane_defconfig
+++ b/configs/am3517_crane_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_AM3517_CRANE=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig
index 2336f1e..7558b89 100644
--- a/configs/am3517_evm_defconfig
+++ b/configs/am3517_evm_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_AM3517_EVM=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/arches_defconfig b/configs/arches_defconfig
index 18d0a14..30c6932 100644
--- a/configs/arches_defconfig
+++ b/configs/arches_defconfig
@@ -1,4 +1,7 @@
-CONFIG_SYS_EXTRA_OPTIONS="ARCHES"
CONFIG_PPC=y
CONFIG_4xx=y
CONFIG_TARGET_CANYONLANDS=y
+CONFIG_ARCHES=y
+CONFIG_DEFAULT_DEVICE_TREE="arches"
+CONFIG_OF_CONTROL=y
+CONFIG_OF_SEPARATE=y
diff --git a/configs/axs103_defconfig b/configs/axs103_defconfig
new file mode 100644
index 0000000..c63dd4a
--- /dev/null
+++ b/configs/axs103_defconfig
@@ -0,0 +1,5 @@
+CONFIG_SYS_TEXT_BASE=0x81000000
+CONFIG_SYS_CLK_FREQ=50000000
+CONFIG_ARC=y
+CONFIG_ISA_ARCV2=y
+CONFIG_TARGET_AXS101=y
diff --git a/configs/canyonlands_defconfig b/configs/canyonlands_defconfig
index 09b9ab9..44d4fbd 100644
--- a/configs/canyonlands_defconfig
+++ b/configs/canyonlands_defconfig
@@ -1,4 +1,7 @@
-CONFIG_SYS_EXTRA_OPTIONS="CANYONLANDS"
CONFIG_PPC=y
CONFIG_4xx=y
CONFIG_TARGET_CANYONLANDS=y
+CONFIG_CANYONLANDS=y
+CONFIG_DEFAULT_DEVICE_TREE="canyonlands"
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig
index 3c0d64f..631698c 100644
--- a/configs/cm_fx6_defconfig
+++ b/configs/cm_fx6_defconfig
@@ -2,3 +2,8 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL,SPL"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_CM_FX6=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/cm_t335_defconfig b/configs/cm_t335_defconfig
index 5ff4f9c..5c1d3cf 100644
--- a/configs/cm_t335_defconfig
+++ b/configs/cm_t335_defconfig
@@ -1,3 +1,5 @@
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_CM_T335=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/cm_t3517_defconfig b/configs/cm_t3517_defconfig
index 4000d2c..6eb37c0 100644
--- a/configs/cm_t3517_defconfig
+++ b/configs/cm_t3517_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=n
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_CM_T3517=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/cm_t35_defconfig b/configs/cm_t35_defconfig
index 2bb616f..84a6fb0 100644
--- a/configs/cm_t35_defconfig
+++ b/configs/cm_t35_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_CM_T35=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/devkit8000_defconfig b/configs/devkit8000_defconfig
index 578ae74..05a8700 100644
--- a/configs/devkit8000_defconfig
+++ b/configs/devkit8000_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_DEVKIT8000=y
+CONFIG_DM=y
+CONFIG_DM_SERIAL=y
+CONFIG_DM_GPIO=y
diff --git a/configs/dig297_defconfig b/configs/dig297_defconfig
index 95bc353..0d18290 100644
--- a/configs/dig297_defconfig
+++ b/configs/dig297_defconfig
@@ -1,3 +1,6 @@
CONFIG_ARM=y
CONFIG_OMAP34XX=y
CONFIG_TARGET_DIG297=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/eco5pk_defconfig b/configs/eco5pk_defconfig
index e45bdad..e07df8b 100644
--- a/configs/eco5pk_defconfig
+++ b/configs/eco5pk_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_ECO5PK=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/glacier_defconfig b/configs/glacier_defconfig
index 2a66bfb..d318f82 100644
--- a/configs/glacier_defconfig
+++ b/configs/glacier_defconfig
@@ -1,4 +1,7 @@
-CONFIG_SYS_EXTRA_OPTIONS="GLACIER"
CONFIG_PPC=y
CONFIG_4xx=y
CONFIG_TARGET_CANYONLANDS=y
+CONFIG_GLACIER=y
+CONFIG_DEFAULT_DEVICE_TREE="glacier"
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
diff --git a/configs/glacier_ramboot_defconfig b/configs/glacier_ramboot_defconfig
new file mode 100644
index 0000000..f8363b2
--- /dev/null
+++ b/configs/glacier_ramboot_defconfig
@@ -0,0 +1,8 @@
+CONFIG_SYS_EXTRA_OPTIONS="SYS_RAMBOOT,SYS_TEXT_BASE=0x01000000,SYS_LDSCRIPT=board/amcc/canyonlands/u-boot-ram.lds"
+CONFIG_PPC=y
+CONFIG_4xx=y
+CONFIG_TARGET_CANYONLANDS=y
+CONFIG_GLACIER=y
+CONFIG_DEFAULT_DEVICE_TREE="glacier"
+CONFIG_OF_CONTROL=y
+CONFIG_OF_EMBED=y
diff --git a/configs/gwventana_defconfig b/configs/gwventana_defconfig
index 4cddbdd..5b1a4c4 100644
--- a/configs/gwventana_defconfig
+++ b/configs/gwventana_defconfig
@@ -2,3 +2,5 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_GW_VENTANA=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/mcx_defconfig b/configs/mcx_defconfig
index c2031f8..6566d40 100644
--- a/configs/mcx_defconfig
+++ b/configs/mcx_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_MCX=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/mt_ventoux_defconfig b/configs/mt_ventoux_defconfig
index a0678bb..a4747c6 100644
--- a/configs/mt_ventoux_defconfig
+++ b/configs/mt_ventoux_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_MT_VENTOUX=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/mx6dlsabreauto_defconfig b/configs/mx6dlsabreauto_defconfig
index b649935..47f3f87 100644
--- a/configs/mx6dlsabreauto_defconfig
+++ b/configs/mx6dlsabreauto_defconfig
@@ -1,3 +1,7 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL"
CONFIG_ARM=y
CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6dlsabresd_defconfig b/configs/mx6dlsabresd_defconfig
index 7f6cdff..6adfd55 100644
--- a/configs/mx6dlsabresd_defconfig
+++ b/configs/mx6dlsabresd_defconfig
@@ -1,3 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL"
CONFIG_ARM=y
CONFIG_TARGET_MX6SABRESD=y
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6qsabreauto_defconfig b/configs/mx6qsabreauto_defconfig
index 7d86700..ab72942 100644
--- a/configs/mx6qsabreauto_defconfig
+++ b/configs/mx6qsabreauto_defconfig
@@ -1,3 +1,7 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q"
CONFIG_ARM=y
CONFIG_TARGET_MX6QSABREAUTO=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6qsabrelite_defconfig b/configs/mx6qsabrelite_defconfig
index dfa9c2e..50b75ae 100644
--- a/configs/mx6qsabrelite_defconfig
+++ b/configs/mx6qsabrelite_defconfig
@@ -1,3 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q.cfg,MX6Q,DDR_MB=1024,SABRELITE"
CONFIG_ARM=y
CONFIG_TARGET_NITROGEN6X=y
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6qsabresd_defconfig b/configs/mx6qsabresd_defconfig
index 67c1b77..112918b 100644
--- a/configs/mx6qsabresd_defconfig
+++ b/configs/mx6qsabresd_defconfig
@@ -1,3 +1,7 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q"
CONFIG_ARM=y
CONFIG_TARGET_MX6SABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6sabresd_spl_defconfig b/configs/mx6sabresd_spl_defconfig
index 12e7844..67079ba 100644
--- a/configs/mx6sabresd_spl_defconfig
+++ b/configs/mx6sabresd_spl_defconfig
@@ -2,4 +2,5 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,SPL,MX6Q"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_MX6SABRESD=y
-
+CONFIG_DM=y
+CONFIG_DM_THERMAL=y
diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig
index f23d48f..72e0f10 100644
--- a/configs/mx6sxsabresd_defconfig
+++ b/configs/mx6sxsabresd_defconfig
@@ -1,3 +1,5 @@
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX"
CONFIG_ARM=y
CONFIG_TARGET_MX6SXSABRESD=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig
index e03f586..1bb7664 100644
--- a/configs/nokia_rx51_defconfig
+++ b/configs/nokia_rx51_defconfig
@@ -1,3 +1,8 @@
CONFIG_ARM=y
CONFIG_OMAP34XX=y
CONFIG_TARGET_NOKIA_RX51=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig
index a3e4c2c..5a2d20b 100644
--- a/configs/omap3_beagle_defconfig
+++ b/configs/omap3_beagle_defconfig
@@ -3,3 +3,6 @@ CONFIG_SYS_EXTRA_OPTIONS="NAND"
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_OMAP3_BEAGLE=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
diff --git a/configs/omap3_evm_defconfig b/configs/omap3_evm_defconfig
index c749aa7..3bb1911 100644
--- a/configs/omap3_evm_defconfig
+++ b/configs/omap3_evm_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_OMAP3_EVM=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/omap3_evm_quick_mmc_defconfig b/configs/omap3_evm_quick_mmc_defconfig
index e89bb82..4e1471b 100644
--- a/configs/omap3_evm_quick_mmc_defconfig
+++ b/configs/omap3_evm_quick_mmc_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_OMAP3_EVM_QUICK_MMC=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/omap3_evm_quick_nand_defconfig b/configs/omap3_evm_quick_nand_defconfig
index e70fddd..f98672f 100644
--- a/configs/omap3_evm_quick_nand_defconfig
+++ b/configs/omap3_evm_quick_nand_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_OMAP3_EVM_QUICK_NAND=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/omap3_ha_defconfig b/configs/omap3_ha_defconfig
index 50bffa9..1a8b1b4 100644
--- a/configs/omap3_ha_defconfig
+++ b/configs/omap3_ha_defconfig
@@ -3,3 +3,6 @@ CONFIG_SYS_EXTRA_OPTIONS="SYS_BOARD_OMAP3_HA"
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_TAO3530=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/omap3_logic_defconfig b/configs/omap3_logic_defconfig
index 5f2c063..790ccba 100644
--- a/configs/omap3_logic_defconfig
+++ b/configs/omap3_logic_defconfig
@@ -1,3 +1,6 @@
CONFIG_ARM=y
CONFIG_OMAP34XX=y
CONFIG_TARGET_OMAP3_LOGIC=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/omap3_mvblx_defconfig b/configs/omap3_mvblx_defconfig
index fb6edc2..b75f513 100644
--- a/configs/omap3_mvblx_defconfig
+++ b/configs/omap3_mvblx_defconfig
@@ -1,3 +1,6 @@
CONFIG_ARM=y
CONFIG_OMAP34XX=y
CONFIG_TARGET_OMAP3_MVBLX=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/omap3_pandora_defconfig b/configs/omap3_pandora_defconfig
index bf28537..dd0f17c 100644
--- a/configs/omap3_pandora_defconfig
+++ b/configs/omap3_pandora_defconfig
@@ -1,3 +1,6 @@
CONFIG_ARM=y
CONFIG_OMAP34XX=y
CONFIG_TARGET_OMAP3_PANDORA=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/omap3_sdp3430_defconfig b/configs/omap3_sdp3430_defconfig
index 1172c2a..b3a8745 100644
--- a/configs/omap3_sdp3430_defconfig
+++ b/configs/omap3_sdp3430_defconfig
@@ -1,3 +1,6 @@
CONFIG_ARM=y
CONFIG_OMAP34XX=y
CONFIG_TARGET_OMAP3_SDP3430=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/pcm051_rev1_defconfig b/configs/pcm051_rev1_defconfig
index 8b27682..baa2b23 100644
--- a/configs/pcm051_rev1_defconfig
+++ b/configs/pcm051_rev1_defconfig
@@ -2,3 +2,5 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="REV1"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PCM051=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/pcm051_rev3_defconfig b/configs/pcm051_rev3_defconfig
index 27ad6ff..b5c62a6 100644
--- a/configs/pcm051_rev3_defconfig
+++ b/configs/pcm051_rev3_defconfig
@@ -2,3 +2,5 @@ CONFIG_SPL=y
CONFIG_SYS_EXTRA_OPTIONS="REV3"
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PCM051=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/pengwyn_defconfig b/configs/pengwyn_defconfig
index 1b9aa68..cbdd404 100644
--- a/configs/pengwyn_defconfig
+++ b/configs/pengwyn_defconfig
@@ -1,3 +1,5 @@
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PENGWYN=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/pepper_defconfig b/configs/pepper_defconfig
index 22c7bb4..14266ef 100644
--- a/configs/pepper_defconfig
+++ b/configs/pepper_defconfig
@@ -1,3 +1,5 @@
CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_PEPPER=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig
index 9379cf0..98d3199 100644
--- a/configs/rpi_defconfig
+++ b/configs/rpi_defconfig
@@ -1,2 +1,4 @@
CONFIG_ARM=y
CONFIG_TARGET_RPI=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/s5p_goni_defconfig b/configs/s5p_goni_defconfig
index 618e590..33e6fb8 100644
--- a/configs/s5p_goni_defconfig
+++ b/configs/s5p_goni_defconfig
@@ -2,3 +2,5 @@ CONFIG_ARM=y
CONFIG_ARCH_S5PC1XX=y
CONFIG_TARGET_S5P_GONI=y
CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig
index 660063e..0bf5ea3 100644
--- a/configs/sandbox_defconfig
+++ b/configs/sandbox_defconfig
@@ -5,3 +5,5 @@ CONFIG_FIT_VERBOSE=y
CONFIG_FIT_SIGNATURE=y
CONFIG_DM=y
CONFIG_DEFAULT_DEVICE_TREE="sandbox"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/silk_defconfig b/configs/silk_defconfig
new file mode 100644
index 0000000..515ee33
--- /dev/null
+++ b/configs/silk_defconfig
@@ -0,0 +1,3 @@
+CONFIG_ARM=y
+CONFIG_RMOBILE=y
+CONFIG_TARGET_SILK=y
diff --git a/configs/smdkc100_defconfig b/configs/smdkc100_defconfig
index 041030f..e933a32 100644
--- a/configs/smdkc100_defconfig
+++ b/configs/smdkc100_defconfig
@@ -2,3 +2,5 @@ CONFIG_ARM=y
CONFIG_TARGET_SMDKC100=y
CONFIG_ARCH_S5PC1XX=y
CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100"
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/snapper9260_defconfig b/configs/snapper9260_defconfig
index 7055e2a..97c49f3 100644
--- a/configs/snapper9260_defconfig
+++ b/configs/snapper9260_defconfig
@@ -1,3 +1,8 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260"
CONFIG_ARM=y
CONFIG_TARGET_SNAPPER9260=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/snapper9g20_defconfig b/configs/snapper9g20_defconfig
index 2faae15..d5f1d9f 100644
--- a/configs/snapper9g20_defconfig
+++ b/configs/snapper9g20_defconfig
@@ -1,3 +1,8 @@
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20"
CONFIG_ARM=y
CONFIG_TARGET_SNAPPER9260=y
+CONFIG_DM=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x400
diff --git a/configs/socfpga_socrates_defconfig b/configs/socfpga_socrates_defconfig
index 0f3896d..888bbb6 100644
--- a/configs/socfpga_socrates_defconfig
+++ b/configs/socfpga_socrates_defconfig
@@ -3,3 +3,6 @@ CONFIG_SPL=y
+S:CONFIG_TARGET_SOCFPGA_CYCLONE5=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="socfpga_cyclone5_socrates"
+CONFIG_DM=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
diff --git a/configs/stv0991_defconfig b/configs/stv0991_defconfig
index a05e991..1c9ba88 100644
--- a/configs/stv0991_defconfig
+++ b/configs/stv0991_defconfig
@@ -1,3 +1,7 @@
CONFIG_SYS_EXTRA_OPTIONS="stv0991"
CONFIG_ARM=y
CONFIG_TARGET_STV0991=y
+CONFIG_SYS_MALLOC_F=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DM=y
+CONFIG_DM_SERIAL=y
diff --git a/configs/tao3530_defconfig b/configs/tao3530_defconfig
index a511389..39ed872 100644
--- a/configs/tao3530_defconfig
+++ b/configs/tao3530_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_TAO3530=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/tricorder_defconfig b/configs/tricorder_defconfig
index 7ea5e02..3efe829 100644
--- a/configs/tricorder_defconfig
+++ b/configs/tricorder_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_TRICORDER=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/tricorder_flash_defconfig b/configs/tricorder_flash_defconfig
index f6e1c46..8f999ff 100644
--- a/configs/tricorder_flash_defconfig
+++ b/configs/tricorder_flash_defconfig
@@ -3,3 +3,6 @@ CONFIG_SYS_EXTRA_OPTIONS="FLASHCARD"
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_TRICORDER=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/configs/twister_defconfig b/configs/twister_defconfig
index 9023736..d21a551 100644
--- a/configs/twister_defconfig
+++ b/configs/twister_defconfig
@@ -2,3 +2,6 @@ CONFIG_SPL=y
+S:CONFIG_ARM=y
+S:CONFIG_OMAP34XX=y
+S:CONFIG_TARGET_TWISTER=y
+CONFIG_DM=n
+CONFIG_DM_SERIAL=n
+CONFIG_DM_GPIO=n
diff --git a/doc/driver-model/spi-howto.txt b/doc/driver-model/spi-howto.txt
index 5bc29ad..ee4abf4 100644
--- a/doc/driver-model/spi-howto.txt
+++ b/doc/driver-model/spi-howto.txt
@@ -40,8 +40,8 @@ with only minor changes:
Add these to your board config:
-#define CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
+CONFIG_DM_SPI
+CONFIG_DM_SPI_FLASH
2. Add the skeleton
diff --git a/drivers/Kconfig b/drivers/Kconfig
index 128736d..dcce532 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -2,6 +2,8 @@ menu "Device Drivers"
source "drivers/core/Kconfig"
+source "drivers/demo/Kconfig"
+
source "drivers/pci/Kconfig"
source "drivers/pcmcia/Kconfig"
@@ -48,4 +50,6 @@ source "drivers/dma/Kconfig"
source "drivers/crypto/Kconfig"
+source "drivers/thermal/Kconfig"
+
endmenu
diff --git a/drivers/core/Kconfig b/drivers/core/Kconfig
index d2799dc..f0d6110 100644
--- a/drivers/core/Kconfig
+++ b/drivers/core/Kconfig
@@ -2,5 +2,51 @@ config DM
bool "Enable Driver Model"
depends on !SPL_BUILD
help
- This config option enables Driver Model.
- To use legacy drivers, say N.
+ This config option enables Driver Model. This brings in the core
+ support, including scanning of platform data on start-up. If
+ CONFIG_OF_CONTROL is enabled, the device tree will be scanned also
+ when available.
+
+config SPL_DM
+ bool "Enable Driver Model for SPL"
+ depends on DM && SPL
+ help
+ Enable driver model in SPL. You will need to provide a
+ suitable malloc() implementation. If you are not using the
+ full malloc() enabled by CONFIG_SYS_SPL_MALLOC_START,
+ consider using CONFIG_SYS_MALLOC_SIMPLE. In that case you
+ must provide CONFIG_SYS_MALLOC_F_LEN to set the size.
+ In most cases driver model will only allocate a few uclasses
+ and devices in SPL, so 1KB should be enable. See
+ CONFIG_SYS_MALLOC_F_LEN for more details on how to enable it.
+
+config DM_WARN
+ bool "Enable warnings in driver model"
+ help
+ The dm_warn() function can use up quite a bit of space for its
+ strings. By default this is disabled for SPL builds to save space.
+ This will cause dm_warn() to be compiled out - it will do nothing
+ when called.
+ depends on DM
+ default y if !SPL_BUILD
+ default n if SPL_BUILD
+
+config DM_DEVICE_REMOVE
+ bool "Support device removal"
+ help
+ We can save some code space by dropping support for removing a
+ device. This is not normally required in SPL, so by default this
+ option is disabled for SPL.
+ depends on DM
+ default y if !SPL_BUILD
+ default n if SPL_BUILD
+
+config DM_STDIO
+ bool "Support stdio registration"
+ help
+ Normally serial drivers register with stdio so that they can be used
+ as normal output devices. In SPL we don't normally use stdio, so
+ we can omit this feature.
+ depends on DM
+ default y if !SPL_BUILD
+ default n if SPL_BUILD
diff --git a/drivers/core/device.c b/drivers/core/device.c
index b73d3b8..73c3e07 100644
--- a/drivers/core/device.c
+++ b/drivers/core/device.c
@@ -449,3 +449,15 @@ enum uclass_id device_get_uclass_id(struct udevice *dev)
{
return dev->uclass->uc_drv->id;
}
+
+#ifdef CONFIG_OF_CONTROL
+fdt_addr_t dev_get_addr(struct udevice *dev)
+{
+ return fdtdec_get_addr(gd->fdt_blob, dev->of_offset, "reg");
+}
+#else
+fdt_addr_t dev_get_addr(struct udevice *dev)
+{
+ return FDT_ADDR_T_NONE;
+}
+#endif
diff --git a/drivers/core/root.c b/drivers/core/root.c
index 73e3c72..9b5c6bb 100644
--- a/drivers/core/root.c
+++ b/drivers/core/root.c
@@ -37,6 +37,65 @@ struct udevice *dm_root(void)
return gd->dm_root;
}
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
+void fix_drivers(void)
+{
+ struct driver *drv =
+ ll_entry_start(struct driver, driver);
+ const int n_ents = ll_entry_count(struct driver, driver);
+ struct driver *entry;
+
+ for (entry = drv; entry != drv + n_ents; entry++) {
+ if (entry->of_match)
+ entry->of_match = (const struct udevice_id *)
+ ((u32)entry->of_match + gd->reloc_off);
+ if (entry->bind)
+ entry->bind += gd->reloc_off;
+ if (entry->probe)
+ entry->probe += gd->reloc_off;
+ if (entry->remove)
+ entry->remove += gd->reloc_off;
+ if (entry->unbind)
+ entry->unbind += gd->reloc_off;
+ if (entry->ofdata_to_platdata)
+ entry->ofdata_to_platdata += gd->reloc_off;
+ if (entry->child_pre_probe)
+ entry->child_pre_probe += gd->reloc_off;
+ if (entry->child_post_remove)
+ entry->child_post_remove += gd->reloc_off;
+ /* OPS are fixed in every uclass post_probe function */
+ if (entry->ops)
+ entry->ops += gd->reloc_off;
+ }
+}
+
+void fix_uclass(void)
+{
+ struct uclass_driver *uclass =
+ ll_entry_start(struct uclass_driver, uclass);
+ const int n_ents = ll_entry_count(struct uclass_driver, uclass);
+ struct uclass_driver *entry;
+
+ for (entry = uclass; entry != uclass + n_ents; entry++) {
+ if (entry->post_bind)
+ entry->post_bind += gd->reloc_off;
+ if (entry->pre_unbind)
+ entry->pre_unbind += gd->reloc_off;
+ if (entry->post_probe)
+ entry->post_probe += gd->reloc_off;
+ if (entry->pre_remove)
+ entry->pre_remove += gd->reloc_off;
+ if (entry->init)
+ entry->init += gd->reloc_off;
+ if (entry->destroy)
+ entry->destroy += gd->reloc_off;
+ /* FIXME maybe also need to fix these ops */
+ if (entry->ops)
+ entry->ops += gd->reloc_off;
+ }
+}
+#endif
+
int dm_init(void)
{
int ret;
@@ -47,6 +106,11 @@ int dm_init(void)
}
INIT_LIST_HEAD(&DM_UCLASS_ROOT_NON_CONST);
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
+ fix_drivers();
+ fix_uclass();
+#endif
+
ret = device_bind_by_name(NULL, false, &root_info, &DM_ROOT_NON_CONST);
if (ret)
return ret;
diff --git a/drivers/demo/Kconfig b/drivers/demo/Kconfig
new file mode 100644
index 0000000..7a8ce18
--- /dev/null
+++ b/drivers/demo/Kconfig
@@ -0,0 +1,26 @@
+config DM_DEMO
+ bool "Enable demo uclass support"
+ depends on DM
+ help
+ This uclass allows you to play around with driver model. It provides
+ an interface to a couple of demo devices. You can access it using
+ the 'demo' command or by calling the uclass functions from your
+ own code.
+
+config DM_DEMO_SIMPLE
+ bool "Enable simple demo device for driver model"
+ depends on DM_DEMO
+ help
+ This device allows you to play around with driver model. It prints
+ a message when the 'demo hello' command is executed which targets
+ this device. It can be used to help understand how driver model
+ works.
+
+config DM_DEMO_SHAPE
+ bool "Enable shape demo device for driver model"
+ depends on DM_DEMO
+ help
+ This device allows you to play around with driver model. It prints
+ a shape when the 'demo hello' command is executed which targets
+ this device. It can be used to help understand how driver model
+ works.
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index d21302f..b609e73 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -2,5 +2,8 @@ config DM_GPIO
bool "Enable Driver Model for GPIO drivers"
depends on DM
help
- If you want to use driver model for GPIO drivers, say Y.
- To use legacy GPIO drivers, say N.
+ Enable driver model for GPIO access. The standard GPIO
+ interface (gpio_get_value(), etc.) is then implemented by
+ the GPIO uclass. Drivers provide methods to query the
+ particular GPIOs that they provide. The uclass interface
+ is defined in include/asm-generic/gpio.h.
diff --git a/drivers/gpio/at91_gpio.c b/drivers/gpio/at91_gpio.c
index 6129c02..22fbd63 100644
--- a/drivers/gpio/at91_gpio.c
+++ b/drivers/gpio/at91_gpio.c
@@ -451,7 +451,7 @@ struct at91_port_priv {
/* set GPIO pin 'gpio' as an input */
static int at91_gpio_direction_input(struct udevice *dev, unsigned offset)
{
- struct at91_port_priv *port = dev_get_platdata(dev);
+ struct at91_port_priv *port = dev_get_priv(dev);
at91_set_port_input(port->regs, offset, 0);
@@ -462,7 +462,7 @@ static int at91_gpio_direction_input(struct udevice *dev, unsigned offset)
static int at91_gpio_direction_output(struct udevice *dev, unsigned offset,
int value)
{
- struct at91_port_priv *port = dev_get_platdata(dev);
+ struct at91_port_priv *port = dev_get_priv(dev);
at91_set_port_output(port->regs, offset, value);
@@ -472,7 +472,7 @@ static int at91_gpio_direction_output(struct udevice *dev, unsigned offset,
/* read GPIO IN value of pin 'gpio' */
static int at91_gpio_get_value(struct udevice *dev, unsigned offset)
{
- struct at91_port_priv *port = dev_get_platdata(dev);
+ struct at91_port_priv *port = dev_get_priv(dev);
return at91_get_port_value(port->regs, offset);
}
@@ -481,7 +481,7 @@ static int at91_gpio_get_value(struct udevice *dev, unsigned offset)
static int at91_gpio_set_value(struct udevice *dev, unsigned offset,
int value)
{
- struct at91_port_priv *port = dev_get_platdata(dev);
+ struct at91_port_priv *port = dev_get_priv(dev);
at91_set_port_value(port->regs, offset, value);
@@ -490,7 +490,7 @@ static int at91_gpio_set_value(struct udevice *dev, unsigned offset,
static int at91_gpio_get_function(struct udevice *dev, unsigned offset)
{
- struct at91_port_priv *port = dev_get_platdata(dev);
+ struct at91_port_priv *port = dev_get_priv(dev);
/* GPIOF_FUNC is not implemented yet */
if (at91_get_port_output(port->regs, offset))
diff --git a/drivers/gpio/mxc_gpio.c b/drivers/gpio/mxc_gpio.c
index 8bb9e39..815407b 100644
--- a/drivers/gpio/mxc_gpio.c
+++ b/drivers/gpio/mxc_gpio.c
@@ -23,6 +23,7 @@ enum mxc_gpio_direction {
#define GPIO_PER_BANK 32
struct mxc_gpio_plat {
+ int bank_index;
struct gpio_regs *regs;
};
@@ -150,6 +151,9 @@ int gpio_direction_output(unsigned gpio, int value)
#endif
#ifdef CONFIG_DM_GPIO
+#include <fdtdec.h>
+DECLARE_GLOBAL_DATA_PTR;
+
static int mxc_gpio_is_output(struct gpio_regs *regs, int offset)
{
u32 val;
@@ -258,23 +262,6 @@ static const struct dm_gpio_ops gpio_mxc_ops = {
.get_function = mxc_gpio_get_function,
};
-static const struct mxc_gpio_plat mxc_plat[] = {
- { (struct gpio_regs *)GPIO1_BASE_ADDR },
- { (struct gpio_regs *)GPIO2_BASE_ADDR },
- { (struct gpio_regs *)GPIO3_BASE_ADDR },
-#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
- defined(CONFIG_MX53) || defined(CONFIG_MX6)
- { (struct gpio_regs *)GPIO4_BASE_ADDR },
-#endif
-#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6)
- { (struct gpio_regs *)GPIO5_BASE_ADDR },
- { (struct gpio_regs *)GPIO6_BASE_ADDR },
-#endif
-#if defined(CONFIG_MX53) || defined(CONFIG_MX6)
- { (struct gpio_regs *)GPIO7_BASE_ADDR },
-#endif
-};
-
static int mxc_gpio_probe(struct udevice *dev)
{
struct mxc_bank_info *bank = dev_get_priv(dev);
@@ -283,7 +270,7 @@ static int mxc_gpio_probe(struct udevice *dev)
int banknum;
char name[18], *str;
- banknum = plat - mxc_plat;
+ banknum = plat->bank_index;
sprintf(name, "GPIO%d_", banknum + 1);
str = strdup(name);
if (!str)
@@ -295,12 +282,72 @@ static int mxc_gpio_probe(struct udevice *dev)
return 0;
}
+static int mxc_gpio_bind(struct udevice *dev)
+{
+ struct mxc_gpio_plat *plat = dev->platdata;
+ fdt_addr_t addr;
+
+ /*
+ * If platdata already exsits, directly return.
+ * Actually only when DT is not supported, platdata
+ * is statically initialized in U_BOOT_DEVICES.Here
+ * will return.
+ */
+ if (plat)
+ return 0;
+
+ addr = dev_get_addr(dev);
+ if (addr == FDT_ADDR_T_NONE)
+ return -ENODEV;
+
+ /*
+ * TODO:
+ * When every board is converted to driver model and DT is supported,
+ * this can be done by auto-alloc feature, but not using calloc
+ * to alloc memory for platdata.
+ */
+ plat = calloc(1, sizeof(*plat));
+ if (!plat)
+ return -ENOMEM;
+
+ plat->regs = (struct gpio_regs *)addr;
+ plat->bank_index = dev->req_seq;
+ dev->platdata = plat;
+
+ return 0;
+}
+
+static const struct udevice_id mxc_gpio_ids[] = {
+ { .compatible = "fsl,imx35-gpio" },
+ { }
+};
+
U_BOOT_DRIVER(gpio_mxc) = {
.name = "gpio_mxc",
.id = UCLASS_GPIO,
.ops = &gpio_mxc_ops,
.probe = mxc_gpio_probe,
.priv_auto_alloc_size = sizeof(struct mxc_bank_info),
+ .of_match = mxc_gpio_ids,
+ .bind = mxc_gpio_bind,
+};
+
+#ifndef CONFIG_OF_CONTROL
+static const struct mxc_gpio_plat mxc_plat[] = {
+ { 0, (struct gpio_regs *)GPIO1_BASE_ADDR },
+ { 1, (struct gpio_regs *)GPIO2_BASE_ADDR },
+ { 2, (struct gpio_regs *)GPIO3_BASE_ADDR },
+#if defined(CONFIG_MX25) || defined(CONFIG_MX27) || defined(CONFIG_MX51) || \
+ defined(CONFIG_MX53) || defined(CONFIG_MX6)
+ { 3, (struct gpio_regs *)GPIO4_BASE_ADDR },
+#endif
+#if defined(CONFIG_MX27) || defined(CONFIG_MX53) || defined(CONFIG_MX6)
+ { 4, (struct gpio_regs *)GPIO5_BASE_ADDR },
+ { 5, (struct gpio_regs *)GPIO6_BASE_ADDR },
+#endif
+#if defined(CONFIG_MX53) || defined(CONFIG_MX6)
+ { 6, (struct gpio_regs *)GPIO7_BASE_ADDR },
+#endif
};
U_BOOT_DEVICES(mxc_gpios) = {
@@ -320,3 +367,4 @@ U_BOOT_DEVICES(mxc_gpios) = {
#endif
};
#endif
+#endif
diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c
index f3a7ccb..19fc451 100644
--- a/drivers/gpio/omap_gpio.c
+++ b/drivers/gpio/omap_gpio.c
@@ -291,7 +291,7 @@ static int omap_gpio_get_function(struct udevice *dev, unsigned offset)
struct gpio_bank *bank = dev_get_priv(dev);
/* GPIOF_FUNC is not implemented yet */
- if (_get_gpio_direction(bank->base, offset) == OMAP_GPIO_DIR_OUT)
+ if (_get_gpio_direction(bank, offset) == OMAP_GPIO_DIR_OUT)
return GPIOF_OUTPUT;
else
return GPIOF_INPUT;
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 202ea5d..2cc776c 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -2,8 +2,16 @@ config DM_I2C
bool "Enable Driver Model for I2C drivers"
depends on DM
help
- If you want to use driver model for I2C drivers, say Y.
- To use legacy I2C drivers, say N.
+ Enable driver model for I2C. This SPI flash interface
+ (spi_flash_probe(), spi_flash_write(), etc.) is then
+ implemented by the SPI flash uclass. There is one standard
+ SPI flash driver which knows how to probe most chips
+ supported by U-Boot. The uclass interface is defined in
+ include/spi_flash.h, but is currently fully compatible
+ with the old interface to avoid confusion and duplication
+ during the transition parent. SPI and SPI flash must be
+ enabled together (it is not possible to use driver model
+ for one and not the other).
config SYS_I2C_UNIPHIER
bool "UniPhier I2C driver"
diff --git a/drivers/i2c/adi_i2c.c b/drivers/i2c/adi_i2c.c
index 20495b1..c58f14a 100644
--- a/drivers/i2c/adi_i2c.c
+++ b/drivers/i2c/adi_i2c.c
@@ -63,7 +63,7 @@ struct twi_regs {
#endif
/* All transfers are described by this data structure */
-struct i2c_msg {
+struct adi_i2c_msg {
u8 flags;
#define I2C_M_COMBO 0x4
#define I2C_M_STOP 0x2
@@ -81,7 +81,7 @@ struct i2c_msg {
* wait_for_completion - manage the actual i2c transfer
* @msg: the i2c msg
*/
-static int wait_for_completion(struct twi_regs *twi, struct i2c_msg *msg)
+static int wait_for_completion(struct twi_regs *twi, struct adi_i2c_msg *msg)
{
u16 int_stat, ctl;
ulong timebase = get_timer(0);
@@ -151,7 +151,7 @@ static int i2c_transfer(struct i2c_adapter *adap, uint8_t chip, uint addr,
(addr >> 8),
(addr >> 16),
};
- struct i2c_msg msg = {
+ struct adi_i2c_msg msg = {
.flags = flags | (len >= 0xff ? I2C_M_STOP : 0),
.buf = buffer,
.len = len,
diff --git a/drivers/i2c/i2c-uclass.c b/drivers/i2c/i2c-uclass.c
index eafa457..a6991bf 100644
--- a/drivers/i2c/i2c-uclass.c
+++ b/drivers/i2c/i2c-uclass.c
@@ -325,7 +325,7 @@ int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
return ret;
}
-int i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
+int dm_i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
{
struct dm_i2c_ops *ops = i2c_get_ops(bus);
struct dm_i2c_bus *i2c = bus->uclass_priv;
@@ -346,12 +346,7 @@ int i2c_set_bus_speed(struct udevice *bus, unsigned int speed)
return 0;
}
-/*
- * i2c_get_bus_speed:
- *
- * Returns speed of selected I2C bus in Hz
- */
-int i2c_get_bus_speed(struct udevice *bus)
+int dm_i2c_get_bus_speed(struct udevice *bus)
{
struct dm_i2c_ops *ops = i2c_get_ops(bus);
struct dm_i2c_bus *i2c = bus->uclass_priv;
@@ -440,7 +435,7 @@ static int i2c_post_probe(struct udevice *dev)
i2c->speed_hz = fdtdec_get_int(gd->fdt_blob, dev->of_offset,
"clock-frequency", 100000);
- return i2c_set_bus_speed(dev, i2c->speed_hz);
+ return dm_i2c_set_bus_speed(dev, i2c->speed_hz);
}
static int i2c_post_bind(struct udevice *dev)
diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c
index 5eab338..9af496b 100644
--- a/drivers/i2c/kona_i2c.c
+++ b/drivers/i2c/kona_i2c.c
@@ -156,7 +156,7 @@ static struct bcm_kona_i2c_dev g_i2c_devs[CONFIG_SYS_MAX_I2C_BUS] = {
#define I2C_M_RD 0x0001 /* read data */
#define I2C_M_NOSTART 0x4000 /* no restart between msgs */
-struct i2c_msg {
+struct kona_i2c_msg {
uint16_t addr;
uint16_t flags;
uint16_t len;
@@ -297,7 +297,7 @@ static int bcm_kona_i2c_read_fifo_single(struct bcm_kona_i2c_dev *dev,
/* Read any amount of data using the RX FIFO from the i2c bus */
static int bcm_kona_i2c_read_fifo(struct bcm_kona_i2c_dev *dev,
- struct i2c_msg *msg)
+ struct kona_i2c_msg *msg)
{
unsigned int bytes_to_read = MAX_RX_FIFO_SIZE;
unsigned int last_byte_nak = 0;
@@ -392,7 +392,7 @@ static int bcm_kona_i2c_write_fifo_single(struct bcm_kona_i2c_dev *dev,
/* Write any amount of data using TX FIFO to the i2c bus */
static int bcm_kona_i2c_write_fifo(struct bcm_kona_i2c_dev *dev,
- struct i2c_msg *msg)
+ struct kona_i2c_msg *msg)
{
unsigned int bytes_to_write = MAX_TX_FIFO_SIZE;
unsigned int bytes_written = 0;
@@ -418,7 +418,7 @@ static int bcm_kona_i2c_write_fifo(struct bcm_kona_i2c_dev *dev,
/* Send i2c address */
static int bcm_kona_i2c_do_addr(struct bcm_kona_i2c_dev *dev,
- struct i2c_msg *msg)
+ struct kona_i2c_msg *msg)
{
unsigned char addr;
@@ -480,9 +480,9 @@ static void bcm_kona_i2c_config_timing(struct bcm_kona_i2c_dev *dev)
/* Master transfer function */
static int bcm_kona_i2c_xfer(struct bcm_kona_i2c_dev *dev,
- struct i2c_msg msgs[], int num)
+ struct kona_i2c_msg msgs[], int num)
{
- struct i2c_msg *pmsg;
+ struct kona_i2c_msg *pmsg;
int rc = 0;
int i;
@@ -635,7 +635,7 @@ static int kona_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
int alen, uchar *buffer, int len)
{
/* msg[0] writes the addr, msg[1] reads the data */
- struct i2c_msg msg[2];
+ struct kona_i2c_msg msg[2];
unsigned char msgbuf0[64];
struct bcm_kona_i2c_dev *dev = kona_get_dev(adap);
@@ -663,7 +663,7 @@ static int kona_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr,
static int kona_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr,
int alen, uchar *buffer, int len)
{
- struct i2c_msg msg[1];
+ struct kona_i2c_msg msg[1];
unsigned char msgbuf0[64];
unsigned int i;
struct bcm_kona_i2c_dev *dev = kona_get_dev(adap);
diff --git a/drivers/i2c/mv_i2c.c b/drivers/i2c/mv_i2c.c
index dac3463..e65cce0 100644
--- a/drivers/i2c/mv_i2c.c
+++ b/drivers/i2c/mv_i2c.c
@@ -31,7 +31,7 @@
#endif
/* All transfers are described by this data structure */
-struct i2c_msg {
+struct mv_i2c_msg {
u8 condition;
u8 acknack;
u8 direction;
@@ -157,7 +157,7 @@ static int i2c_isr_set_cleared(unsigned long set_mask,
* -5: illegal parameters
* -6: bus is busy and couldn't be aquired
*/
-int i2c_transfer(struct i2c_msg *msg)
+int i2c_transfer(struct mv_i2c_msg *msg)
{
int ret;
@@ -286,7 +286,7 @@ void i2c_init(int speed, int slaveaddr)
*/
int i2c_probe(uchar chip)
{
- struct i2c_msg msg;
+ struct mv_i2c_msg msg;
i2c_reset();
@@ -322,7 +322,7 @@ int i2c_probe(uchar chip)
*/
int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
- struct i2c_msg msg;
+ struct mv_i2c_msg msg;
u8 addr_bytes[3]; /* lowest...highest byte of data address */
PRINTD(("i2c_read(chip=0x%02x, addr=0x%02x, alen=0x%02x, "
@@ -410,7 +410,7 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
*/
int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
{
- struct i2c_msg msg;
+ struct mv_i2c_msg msg;
u8 addr_bytes[3]; /* lowest...highest byte of data address */
PRINTD(("i2c_write(chip=0x%02x, addr=0x%02x, alen=0x%02x, "
diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c
index 0dd1abc..b4ee33f 100644
--- a/drivers/i2c/s3c24x0_i2c.c
+++ b/drivers/i2c/s3c24x0_i2c.c
@@ -112,9 +112,9 @@
#define I2C_START_STOP 0x20 /* START / STOP */
#define I2C_TXRX_ENA 0x10 /* I2C Tx/Rx enable */
-#define I2C_TIMEOUT_MS 1000 /* 1 second */
+#define I2C_TIMEOUT_MS 10 /* 10 ms */
-#define HSI2C_TIMEOUT_US 100000 /* 100 ms, finer granularity */
+#define HSI2C_TIMEOUT_US 10000 /* 10 ms, finer granularity */
/* To support VCMA9 boards and other who dont define max_i2c_num */
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index e69de29..813d1c2 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -0,0 +1,9 @@
+config DM_CROS_EC
+ bool "Enable Driver Model for Chrome OS EC"
+ depends on DM
+ help
+ Enable driver model for the Chrome OS EC interface. This
+ allows the cros_ec SPI driver to operate with CONFIG_DM_SPI
+ but otherwise makes few changes. Since cros_ec also supports
+ I2C and LPC (which don't support driver model yet), a full
+ conversion is not yet possible.
diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
index 415ab4e..59278d1 100644
--- a/drivers/mtd/Kconfig
+++ b/drivers/mtd/Kconfig
@@ -1 +1,3 @@
source "drivers/mtd/nand/Kconfig"
+
+source "drivers/mtd/spi/Kconfig"
diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
new file mode 100644
index 0000000..2dc46b4
--- /dev/null
+++ b/drivers/mtd/spi/Kconfig
@@ -0,0 +1,14 @@
+config DM_SPI_FLASH
+ bool "Enable Driver Model for SPI flash"
+ depends on DM && SPI
+ help
+ Enable driver model for SPI flash. This SPI flash interface
+ (spi_flash_probe(), spi_flash_write(), etc.) is then
+ implemented by the SPI flash uclass. There is one standard
+ SPI flash driver which knows how to probe most chips
+ supported by U-Boot. The uclass interface is defined in
+ include/spi_flash.h, but is currently fully compatible
+ with the old interface to avoid confusion and duplication
+ during the transition parent. SPI and SPI flash must be
+ enabled together (it is not possible to use driver model
+ for one and not the other).
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index a0b6e02..c94353b 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -2,8 +2,10 @@ config DM_SERIAL
bool "Enable Driver Model for serial drivers"
depends on DM
help
- If you want to use driver model for serial drivers, say Y.
- To use legacy serial drivers, say N.
+ Enable driver model for serial. This replaces
+ drivers/serial/serial.c with the serial uclass, which
+ implements serial_putc() etc. The uclass interface is
+ defined in include/serial.h.
config UNIPHIER_SERIAL
bool "UniPhier on-chip UART support"
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 4cc00cd..63b0cbf 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -8,6 +8,7 @@
ifdef CONFIG_DM_SERIAL
obj-y += serial-uclass.o
obj-$(CONFIG_PL01X_SERIAL) += serial_pl01x.o
+obj-$(CONFIG_PPC) += serial_ppc.o
else
obj-y += serial.o
obj-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c
index 9131a8f..3fc7104 100644
--- a/drivers/serial/serial-uclass.c
+++ b/drivers/serial/serial-uclass.c
@@ -258,6 +258,22 @@ static int serial_post_probe(struct udevice *dev)
#endif
int ret;
+#if defined(CONFIG_NEEDS_MANUAL_RELOC)
+ if (ops->setbrg)
+ ops->setbrg += gd->reloc_off;
+ if (ops->getc)
+ ops->getc += gd->reloc_off;
+ if (ops->putc)
+ ops->putc += gd->reloc_off;
+ if (ops->pending)
+ ops->pending += gd->reloc_off;
+ if (ops->clear)
+ ops->clear += gd->reloc_off;
+#if CONFIG_POST & CONFIG_SYS_POST_UART
+ if (ops->loop)
+ ops->loop += gd->reloc_off
+#endif
+#endif
/* Set the baud rate */
if (ops->setbrg) {
ret = ops->setbrg(dev, gd->baudrate);
diff --git a/drivers/serial/serial_ppc.c b/drivers/serial/serial_ppc.c
new file mode 100644
index 0000000..47141c6
--- /dev/null
+++ b/drivers/serial/serial_ppc.c
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2014 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <ns16550.h>
+#include <serial.h>
+
+static const struct udevice_id ppc_serial_ids[] = {
+ { .compatible = "ns16550" },
+ { }
+};
+
+static int ppc_serial_ofdata_to_platdata(struct udevice *dev)
+{
+ struct ns16550_platdata *plat = dev_get_platdata(dev);
+ int ret;
+
+ ret = ns16550_serial_ofdata_to_platdata(dev);
+ if (ret)
+ return ret;
+ plat->clock = get_serial_clock();
+
+ return 0;
+}
+
+U_BOOT_DRIVER(serial_ns16550) = {
+ .name = "serial_ppc",
+ .id = UCLASS_SERIAL,
+ .of_match = ppc_serial_ids,
+ .ofdata_to_platdata = ppc_serial_ofdata_to_platdata,
+ .platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
+ .priv_auto_alloc_size = sizeof(struct NS16550),
+ .probe = ns16550_serial_probe,
+ .ops = &ns16550_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index 7c1f271..3641c9f 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -1,78 +1,21 @@
/*
* SuperH SCIF device driver.
* Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2007,2008,2010 Nobuhiro Iwamatsu
+ * Copyright (C) 2007,2008,2010, 2014 Nobuhiro Iwamatsu
* Copyright (C) 2002 - 2008 Paul Mundt
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
+#include <errno.h>
+#include <dm.h>
#include <asm/io.h>
#include <asm/processor.h>
-#include "serial_sh.h"
#include <serial.h>
#include <linux/compiler.h>
-
-#if defined(CONFIG_CONS_SCIF0)
-# define SCIF_BASE SCIF0_BASE
-#elif defined(CONFIG_CONS_SCIF1)
-# define SCIF_BASE SCIF1_BASE
-#elif defined(CONFIG_CONS_SCIF2)
-# define SCIF_BASE SCIF2_BASE
-#elif defined(CONFIG_CONS_SCIF3)
-# define SCIF_BASE SCIF3_BASE
-#elif defined(CONFIG_CONS_SCIF4)
-# define SCIF_BASE SCIF4_BASE
-#elif defined(CONFIG_CONS_SCIF5)
-# define SCIF_BASE SCIF5_BASE
-#elif defined(CONFIG_CONS_SCIF6)
-# define SCIF_BASE SCIF6_BASE
-#elif defined(CONFIG_CONS_SCIF7)
-# define SCIF_BASE SCIF7_BASE
-#else
-# error "Default SCIF doesn't set....."
-#endif
-
-#if defined(CONFIG_SCIF_A)
- #define SCIF_BASE_PORT PORT_SCIFA
-#else
- #define SCIF_BASE_PORT PORT_SCIF
-#endif
-
-static struct uart_port sh_sci = {
- .membase = (unsigned char*)SCIF_BASE,
- .mapbase = SCIF_BASE,
- .type = SCIF_BASE_PORT,
-};
-
-static void sh_serial_setbrg(void)
-{
- DECLARE_GLOBAL_DATA_PTR;
-#ifdef CONFIG_SCIF_USE_EXT_CLK
- unsigned short dl = DL_VALUE(gd->baudrate, CONFIG_SH_SCIF_CLK_FREQ);
- sci_out(&sh_sci, DL, dl);
- /* Need wait: Clock * 1/dl $B!_(B 1/16 */
- udelay((1000000 * dl * 16 / CONFIG_SYS_CLK_FREQ) * 1000 + 1);
-#else
- sci_out(&sh_sci, SCBRR,
- SCBRR_VALUE(gd->baudrate, CONFIG_SH_SCIF_CLK_FREQ));
-#endif
-}
-
-static int sh_serial_init(void)
-{
- sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci));
- sci_out(&sh_sci, SCSCR , SCSCR_INIT(&sh_sci));
- sci_out(&sh_sci, SCSMR, 0);
- sci_out(&sh_sci, SCSMR, 0);
- sci_out(&sh_sci, SCFCR, SCFCR_RFRST|SCFCR_TFRST);
- sci_in(&sh_sci, SCFCR);
- sci_out(&sh_sci, SCFCR, 0);
-
- serial_setbrg();
- return 0;
-}
+#include <dm/platform_data/serial_sh.h>
+#include "serial_sh.h"
#if defined(CONFIG_CPU_SH7760) || \
defined(CONFIG_CPU_SH7780) || \
@@ -86,7 +29,7 @@ static int scif_rxfill(struct uart_port *port)
static int scif_rxfill(struct uart_port *port)
{
if ((port->mapbase == 0xffe00000) ||
- (port->mapbase == 0xffe08000)) {
+ (port->mapbase == 0xffe08000)) {
/* SCIF0/1*/
return sci_in(port, SCRFDR) & 0xff;
} else {
@@ -109,80 +52,253 @@ static int scif_rxfill(struct uart_port *port)
}
#endif
-static int serial_rx_fifo_level(void)
+static void sh_serial_init_generic(struct uart_port *port)
{
- return scif_rxfill(&sh_sci);
+ sci_out(port, SCSCR , SCSCR_INIT(port));
+ sci_out(port, SCSCR , SCSCR_INIT(port));
+ sci_out(port, SCSMR, 0);
+ sci_out(port, SCSMR, 0);
+ sci_out(port, SCFCR, SCFCR_RFRST|SCFCR_TFRST);
+ sci_in(port, SCFCR);
+ sci_out(port, SCFCR, 0);
}
-static void handle_error(void)
+static void
+sh_serial_setbrg_generic(struct uart_port *port, int clk, int baudrate)
{
- sci_in(&sh_sci, SCxSR);
- sci_out(&sh_sci, SCxSR, SCxSR_ERROR_CLEAR(&sh_sci));
- sci_in(&sh_sci, SCLSR);
- sci_out(&sh_sci, SCLSR, 0x00);
+ if (port->clk_mode == EXT_CLK) {
+ unsigned short dl = DL_VALUE(baudrate, clk);
+ sci_out(port, DL, dl);
+ /* Need wait: Clock * 1/dl $B!_(B 1/16 */
+ udelay((1000000 * dl * 16 / clk) * 1000 + 1);
+ } else {
+ sci_out(port, SCBRR, SCBRR_VALUE(baudrate, clk));
+ }
}
-static void serial_raw_putc(const char c)
+static void handle_error(struct uart_port *port)
{
- while (1) {
- /* Tx fifo is empty */
- if (sci_in(&sh_sci, SCxSR) & SCxSR_TEND(&sh_sci))
- break;
- }
+ sci_in(port, SCxSR);
+ sci_out(port, SCxSR, SCxSR_ERROR_CLEAR(port));
+ sci_in(port, SCLSR);
+ sci_out(port, SCLSR, 0x00);
+}
+
+static int serial_raw_putc(struct uart_port *port, const char c)
+{
+ /* Tx fifo is empty */
+ if (!(sci_in(port, SCxSR) & SCxSR_TEND(port)))
+ return -EAGAIN;
- sci_out(&sh_sci, SCxTDR, c);
- sci_out(&sh_sci, SCxSR, sci_in(&sh_sci, SCxSR) & ~SCxSR_TEND(&sh_sci));
+ sci_out(port, SCxTDR, c);
+ sci_out(port, SCxSR, sci_in(port, SCxSR) & ~SCxSR_TEND(port));
+
+ return 0;
}
-static void sh_serial_putc(const char c)
+static int serial_rx_fifo_level(struct uart_port *port)
{
- if (c == '\n')
- serial_raw_putc('\r');
- serial_raw_putc(c);
+ return scif_rxfill(port);
}
-static int sh_serial_tstc(void)
+static int sh_serial_tstc_generic(struct uart_port *port)
{
- if (sci_in(&sh_sci, SCxSR) & SCIF_ERRORS) {
- handle_error();
+ if (sci_in(port, SCxSR) & SCIF_ERRORS) {
+ handle_error(port);
return 0;
}
- return serial_rx_fifo_level() ? 1 : 0;
+ return serial_rx_fifo_level(port) ? 1 : 0;
}
-
-static int serial_getc_check(void)
+static int serial_getc_check(struct uart_port *port)
{
unsigned short status;
- status = sci_in(&sh_sci, SCxSR);
+ status = sci_in(port, SCxSR);
if (status & SCIF_ERRORS)
- handle_error();
- if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci))
- handle_error();
- return status & (SCIF_DR | SCxSR_RDxF(&sh_sci));
+ handle_error(port);
+ if (sci_in(port, SCLSR) & SCxSR_ORER(port))
+ handle_error(port);
+ return status & (SCIF_DR | SCxSR_RDxF(port));
}
-static int sh_serial_getc(void)
+static int sh_serial_getc_generic(struct uart_port *port)
{
unsigned short status;
char ch;
- while (!serial_getc_check())
- ;
+ if (!serial_getc_check(port))
+ return -EAGAIN;
- ch = sci_in(&sh_sci, SCxRDR);
- status = sci_in(&sh_sci, SCxSR);
+ ch = sci_in(port, SCxRDR);
+ status = sci_in(port, SCxSR);
- sci_out(&sh_sci, SCxSR, SCxSR_RDxF_CLEAR(&sh_sci));
+ sci_out(port, SCxSR, SCxSR_RDxF_CLEAR(port));
if (status & SCIF_ERRORS)
- handle_error();
+ handle_error(port);
+
+ if (sci_in(port, SCLSR) & SCxSR_ORER(port))
+ handle_error(port);
+
+ return ch;
+}
+
+#ifdef CONFIG_DM_SERIAL
+
+static int sh_serial_pending(struct udevice *dev, bool input)
+{
+ struct uart_port *priv = dev_get_priv(dev);
+
+ return sh_serial_tstc_generic(priv);
+}
+
+static int sh_serial_putc(struct udevice *dev, const char ch)
+{
+ struct uart_port *priv = dev_get_priv(dev);
+
+ return serial_raw_putc(priv, ch);
+}
+
+static int sh_serial_getc(struct udevice *dev)
+{
+ struct uart_port *priv = dev_get_priv(dev);
+
+ return sh_serial_getc_generic(priv);
+}
+
+static int sh_serial_setbrg(struct udevice *dev, int baudrate)
+{
+ struct sh_serial_platdata *plat = dev_get_platdata(dev);
+ struct uart_port *priv = dev_get_priv(dev);
+
+ sh_serial_setbrg_generic(priv, plat->clk, baudrate);
+
+ return 0;
+}
+
+static int sh_serial_probe(struct udevice *dev)
+{
+ struct sh_serial_platdata *plat = dev_get_platdata(dev);
+ struct uart_port *priv = dev_get_priv(dev);
+
+ priv->membase = (unsigned char *)plat->base;
+ priv->mapbase = plat->base;
+ priv->type = plat->type;
+ priv->clk_mode = plat->clk_mode;
+
+ sh_serial_init_generic(priv);
+
+ return 0;
+}
+
+static const struct dm_serial_ops sh_serial_ops = {
+ .putc = sh_serial_putc,
+ .pending = sh_serial_pending,
+ .getc = sh_serial_getc,
+ .setbrg = sh_serial_setbrg,
+};
+
+U_BOOT_DRIVER(serial_sh) = {
+ .name = "serial_sh",
+ .id = UCLASS_SERIAL,
+ .probe = sh_serial_probe,
+ .ops = &sh_serial_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+ .priv_auto_alloc_size = sizeof(struct uart_port),
+};
+
+#else /* CONFIG_DM_SERIAL */
+
+#if defined(CONFIG_CONS_SCIF0)
+# define SCIF_BASE SCIF0_BASE
+#elif defined(CONFIG_CONS_SCIF1)
+# define SCIF_BASE SCIF1_BASE
+#elif defined(CONFIG_CONS_SCIF2)
+# define SCIF_BASE SCIF2_BASE
+#elif defined(CONFIG_CONS_SCIF3)
+# define SCIF_BASE SCIF3_BASE
+#elif defined(CONFIG_CONS_SCIF4)
+# define SCIF_BASE SCIF4_BASE
+#elif defined(CONFIG_CONS_SCIF5)
+# define SCIF_BASE SCIF5_BASE
+#elif defined(CONFIG_CONS_SCIF6)
+# define SCIF_BASE SCIF6_BASE
+#elif defined(CONFIG_CONS_SCIF7)
+# define SCIF_BASE SCIF7_BASE
+#else
+# error "Default SCIF doesn't set....."
+#endif
+
+#if defined(CONFIG_SCIF_A)
+ #define SCIF_BASE_PORT PORT_SCIFA
+#else
+ #define SCIF_BASE_PORT PORT_SCIF
+#endif
+
+static struct uart_port sh_sci = {
+ .membase = (unsigned char *)SCIF_BASE,
+ .mapbase = SCIF_BASE,
+ .type = SCIF_BASE_PORT,
+#ifdef CONFIG_SCIF_USE_EXT_CLK
+ .clk_mode = EXT_CLK,
+#endif
+};
+
+static void sh_serial_setbrg(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+ struct uart_port *port = &sh_sci;
+
+ sh_serial_setbrg_generic(port, CONFIG_SH_SCIF_CLK_FREQ, gd->baudrate);
+}
+
+static int sh_serial_init(void)
+{
+ struct uart_port *port = &sh_sci;
+
+ sh_serial_init_generic(port);
+ serial_setbrg();
+
+ return 0;
+}
+
+static void sh_serial_putc(const char c)
+{
+ struct uart_port *port = &sh_sci;
+
+ if (c == '\n') {
+ while (1) {
+ if (serial_raw_putc(port, '\r') != -EAGAIN)
+ break;
+ }
+ }
+ while (1) {
+ if (serial_raw_putc(port, c) != -EAGAIN)
+ break;
+ }
+}
+
+static int sh_serial_tstc(void)
+{
+ struct uart_port *port = &sh_sci;
+
+ return sh_serial_tstc_generic(port);
+}
+
+static int sh_serial_getc(void)
+{
+ struct uart_port *port = &sh_sci;
+ int ch;
+
+ while (1) {
+ ch = sh_serial_getc_generic(port);
+ if (ch != -EAGAIN)
+ break;
+ }
- if (sci_in(&sh_sci, SCLSR) & SCxSR_ORER(&sh_sci))
- handle_error();
return ch;
}
@@ -206,3 +322,4 @@ __weak struct serial_device *default_serial_console(void)
{
return &sh_serial_drv;
}
+#endif /* CONFIG_DM_SERIAL */
diff --git a/drivers/serial/serial_sh.h b/drivers/serial/serial_sh.h
index ef88c8f..528aa73 100644
--- a/drivers/serial/serial_sh.h
+++ b/drivers/serial/serial_sh.h
@@ -2,18 +2,16 @@
* Copy and modify from linux/drivers/serial/sh-sci.h
*/
+#include <dm/platform_data/serial_sh.h>
+
struct uart_port {
unsigned long iobase; /* in/out[bwl] */
unsigned char *membase; /* read/write[bwl] */
unsigned long mapbase; /* for ioremap */
- unsigned int type; /* port type */
+ enum sh_serial_type type; /* port type */
+ enum sh_clk_mode clk_mode; /* clock mode */
};
-#define PORT_SCI 52
-#define PORT_SCIF 53
-#define PORT_SCIFA 83
-#define PORT_SCIFB 93
-
#if defined(CONFIG_H83007) || defined(CONFIG_H83068)
#include <asm/regs306x.h>
#endif
@@ -526,6 +524,7 @@ SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCxTDR, 0x20, 8)
SCIF_FNS(SCxRDR, 0x24, 8)
SCIF_FNS(SCLSR, 0x00, 0)
+SCIF_FNS(DL, 0x00, 0) /* dummy */
#elif defined(CONFIG_ARCH_SH7372) || \
defined(CONFIG_R8A7740)
SCIF_FNS(SCSMR, 0x00, 16)
@@ -541,6 +540,7 @@ SCIF_FNS(SCRFDR, 0x3c, 16)
SCIx_FNS(SCxTDR, 0x20, 8, 0x40, 8)
SCIx_FNS(SCxRDR, 0x24, 8, 0x60, 8)
SCIF_FNS(SCLSR, 0x00, 0)
+SCIF_FNS(DL, 0x00, 0) /* dummy */
#elif defined(CONFIG_CPU_SH7723) ||\
defined(CONFIG_CPU_SH7724)
SCIx_FNS(SCSMR, 0x00, 16, 0x00, 16)
@@ -555,6 +555,7 @@ SCIF_FNS(SCFER, 0x10, 16)
SCIF_FNS(SCFCR, 0x18, 16)
SCIF_FNS(SCFDR, 0x1c, 16)
SCIF_FNS(SCLSR, 0x24, 16)
+SCIF_FNS(DL, 0x00, 0) /* dummy */
#else
/* reg SCI/SH3 SCI/SH4 SCIF/SH3 SCIF/SH4 SCI/H8*/
/* name off sz off sz off sz off sz off sz*/
@@ -583,18 +584,21 @@ SCIF_FNS(SCRFDR, 0x0e, 16, 0x20, 16)
SCIF_FNS(SCSPTR, 0, 0, 0x24, 16)
SCIF_FNS(SCLSR, 0, 0, 0x28, 16)
#else
+
SCIF_FNS(SCFDR, 0x0e, 16, 0x1C, 16)
#if defined(CONFIG_CPU_SH7722)
SCIF_FNS(SCSPTR, 0, 0, 0, 0)
#else
SCIF_FNS(SCSPTR, 0, 0, 0x20, 16)
#endif
+SCIF_FNS(SCLSR, 0, 0, 0x24, 16)
+#endif
#if defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \
defined(CONFIG_R8A7793) || defined(CONFIG_R8A7794)
SCIF_FNS(DL, 0, 0, 0x30, 16)
SCIF_FNS(CKS, 0, 0, 0x34, 16)
-#endif
-SCIF_FNS(SCLSR, 0, 0, 0x24, 16)
+#else
+SCIF_FNS(DL, 0, 0, 0x0, 0) /* dummy */
#endif
#endif
#define sci_in(port, reg) sci_##reg##_in(port)
@@ -725,14 +729,14 @@ static inline int sci_rxd_in(struct uart_port *port)
#define SCBRR_VALUE(bps, clk) (((clk*2)+16*bps)/(32*bps)-1)
#elif defined(CONFIG_CPU_SH7723) ||\
defined(CONFIG_CPU_SH7724)
-static inline int scbrr_calc(struct uart_port port, int bps, int clk)
+static inline int scbrr_calc(struct uart_port *port, int bps, int clk)
{
- if (port.type == PORT_SCIF)
+ if (port->type == PORT_SCIF)
return (clk+16*bps)/(32*bps)-1;
else
return ((clk*2)+16*bps)/(16*bps)-1;
}
-#define SCBRR_VALUE(bps, clk) scbrr_calc(sh_sci, bps, clk)
+#define SCBRR_VALUE(bps, clk) scbrr_calc(port, bps, clk)
#elif defined(__H8300H__) || defined(__H8300S__)
#define SCBRR_VALUE(bps, clk) (((clk*1000/32)/bps)-1)
#elif defined(CONFIG_R8A7790) || defined(CONFIG_R8A7791) || \
@@ -742,3 +746,7 @@ static inline int scbrr_calc(struct uart_port port, int bps, int clk)
#else /* Generic SH */
#define SCBRR_VALUE(bps, clk) ((clk+16*bps)/(32*bps)-1)
#endif
+
+#ifndef DL_VALUE
+#define DL_VALUE(bps, clk) 0
+#endif
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index e1678e6..7ae2727 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -2,5 +2,11 @@ config DM_SPI
bool "Enable Driver Model for SPI drivers"
depends on DM
help
- If you want to use driver model for SPI drivers, say Y.
- To use legacy SPI drivers, say N.
+ Enable driver model for SPI. The SPI slave interface
+ (spi_setup_slave(), spi_xfer(), etc.) is then implemented by
+ the SPI uclass. Drivers provide methods to access the SPI
+ buses that they control. The uclass interface is defined in
+ include/spi.h. The existing spi_slave structure is attached
+ as 'parent data' to every slave on each bus. Slaves
+ typically use driver-private data instead of extending the
+ spi_slave structure.
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
new file mode 100644
index 0000000..3c6b36d
--- /dev/null
+++ b/drivers/thermal/Kconfig
@@ -0,0 +1,7 @@
+config DM_THERMAL
+ bool "Driver support for thermal devices"
+ help
+ Enable support for temporary-sensing devices. Some SoCs have on-chip
+ temperature sensors to permit warnings, speed throttling or even
+ automatic power-off when the temperature gets too high or low. Other
+ devices may be discrete but connected on a suitable bus.
diff --git a/include/config_defaults.h b/include/config_defaults.h
index 4d49315..ad08c1d 100644
--- a/include/config_defaults.h
+++ b/include/config_defaults.h
@@ -20,10 +20,4 @@
#define CONFIG_ZLIB 1
#define CONFIG_PARTITIONS 1
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_DM_WARN
-#define CONFIG_DM_DEVICE_REMOVE
-#define CONFIG_DM_STDIO
-#endif
-
#endif
diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h
index 2aea899..73e1b0a 100644
--- a/include/configs/amcc-common.h
+++ b/include/configs/amcc-common.h
@@ -20,8 +20,10 @@
*/
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
+#ifndef CONFIG_DM_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE 1
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
+#endif
#define CONFIG_BAUDRATE 115200
#define CONFIG_SYS_BAUDRATE_TABLE \
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h
index 8eeb15c..7a1499d 100644
--- a/include/configs/canyonlands.h
+++ b/include/configs/canyonlands.h
@@ -11,6 +11,10 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#include <linux/kconfig.h>
+
+#define CONFIG_SYS_GENERIC_BOARD
+
/*-----------------------------------------------------------------------
* High Level Configuration Options
*----------------------------------------------------------------------*/
@@ -19,10 +23,10 @@
* and Arches dual (460GT)
*/
#ifdef CONFIG_CANYONLANDS
-#define CONFIG_460EX 1 /* Specific PPC460EX */
+#define CONFIG_460EX /* Specific PPC460EX */
#define CONFIG_HOSTNAME canyonlands
#else
-#define CONFIG_460GT 1 /* Specific PPC460GT */
+#define CONFIG_460GT /* Specific PPC460GT */
#ifdef CONFIG_GLACIER
#define CONFIG_HOSTNAME glacier
#else
@@ -32,7 +36,7 @@
#endif
#endif
-#define CONFIG_440 1
+#define CONFIG_440
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE 0xFFF80000
@@ -45,10 +49,10 @@
#define CONFIG_SYS_CLK_FREQ 66666667 /* external freq to pll */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
-#define CONFIG_BOARD_EARLY_INIT_R 1 /* Call board_early_init_r */
-#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */
-#define CONFIG_BOARD_TYPES 1 /* support board types */
+#define CONFIG_BOARD_EARLY_INIT_F /* Call board_early_init_f */
+#define CONFIG_BOARD_EARLY_INIT_R /* Call board_early_init_r */
+#define CONFIG_MISC_INIT_R /* Call misc_init_r */
+#define CONFIG_BOARD_TYPES /* support board types */
/*-----------------------------------------------------------------------
* Base addresses -- Note these are effective addresses where the
@@ -134,7 +138,7 @@
*----------------------------------------------------------------------*/
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
-#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */
+#define CONFIG_SYS_FLASH_CFI_AMD_RESET /* Use AMD (Spansion) reset cmd */
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
@@ -172,9 +176,9 @@
* I2C SPD DIMM autodetection/calibration doesn't fit into the 4k of boot
* code.
*/
-#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup */
+#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */
#define SPD_EEPROM_ADDRESS {0x50, 0x51} /* SPD i2c spd addresses*/
-#define CONFIG_DDR_ECC 1 /* with ECC support */
+#define CONFIG_DDR_ECC /* with ECC support */
#define CONFIG_DDR_RQDC_FIXED 0x80000038 /* fixed value for RQDC */
#else /* defined(CONFIG_ARCHES) */
@@ -262,8 +266,8 @@
#define CONFIG_4xx_CONFIG_BLOCKSIZE 16
/* I2C SYSMON (LM75, AD7414 is almost compatible) */
-#define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */
-#define CONFIG_DTT_AD7414 1 /* use AD7414 */
+#define CONFIG_DTT_LM75 /* ON Semi's LM75 */
+#define CONFIG_DTT_AD7414 /* use AD7414 */
#define CONFIG_DTT_SENSORS {0} /* Sensor addresses */
#define CONFIG_SYS_DTT_MAX_TEMP 70
#define CONFIG_SYS_DTT_LOW_TEMP -30
@@ -275,14 +279,14 @@
#if !defined(CONFIG_ARCHES)
/* RTC configuration */
-#define CONFIG_RTC_M41T62 1
+#define CONFIG_RTC_M41T62
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
#endif
/*-----------------------------------------------------------------------
* Ethernet
*----------------------------------------------------------------------*/
-#define CONFIG_IBM_EMAC4_V4 1
+#define CONFIG_IBM_EMAC4_V4
#define CONFIG_HAS_ETH0
#define CONFIG_HAS_ETH1
@@ -322,9 +326,9 @@
#define CONFIG_GPCS_PHY2_ADDR 0xC
#endif /* !defined(CONFIG_ARCHES) */
-#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
-#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
-#define CONFIG_PHY_DYNAMIC_ANEG 1
+#define CONFIG_PHY_RESET /* reset phy upon startup */
+#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
+#define CONFIG_PHY_DYNAMIC_ANEG
/*-----------------------------------------------------------------------
* USB-OHCI
diff --git a/include/configs/cm_fx6.h b/include/configs/cm_fx6.h
index 1f64495..4207504 100644
--- a/include/configs/cm_fx6.h
+++ b/include/configs/cm_fx6.h
@@ -21,14 +21,7 @@
#define CONFIG_MACH_TYPE 4273
#ifndef CONFIG_SPL_BUILD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-
-#define CONFIG_DM_GPIO
#define CONFIG_CMD_GPIO
-
-#define CONFIG_DM_SERIAL
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
/* Display information on boot */
diff --git a/include/configs/exynos-common.h b/include/configs/exynos-common.h
index 1f3ee55..59676ae 100644
--- a/include/configs/exynos-common.h
+++ b/include/configs/exynos-common.h
@@ -17,12 +17,6 @@
#include <linux/sizes.h>
#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
-#define CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_DISPLAY_CPUINFO
@@ -42,7 +36,6 @@
#define CONFIG_ENV_OVERWRITE
/* Size of malloc() pool before and after relocation */
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20))
/* select serial console configuration */
diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h
index 4f137fc..620f950 100644
--- a/include/configs/gw_ventana.h
+++ b/include/configs/gw_ventana.h
@@ -39,7 +39,6 @@
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/* Init Functions */
#define CONFIG_BOARD_EARLY_INIT_F
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index f0f721e..4aa8101 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -25,9 +25,6 @@
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
-#define CONFIG_DM
-#define CONFIG_DM_THERMAL
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_IMX6_THERMAL
#define CONFIG_SYS_GENERIC_BOARD
diff --git a/include/configs/mx6sxsabresd.h b/include/configs/mx6sxsabresd.h
index 404b922..1005b9e 100644
--- a/include/configs/mx6sxsabresd.h
+++ b/include/configs/mx6sxsabresd.h
@@ -229,7 +229,6 @@
#define CONFIG_DM
#define CONFIG_DM_THERMAL
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_IMX6_THERMAL
#define CONFIG_CMD_FUSE
diff --git a/include/configs/novena.h b/include/configs/novena.h
index ea75d2c..074110c 100644
--- a/include/configs/novena.h
+++ b/include/configs/novena.h
@@ -116,7 +116,6 @@
#define CONFIG_SYS_MEMTEST_END 0x20000000
#define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/* SPL */
#define CONFIG_SPL_FAT_SUPPORT
diff --git a/include/configs/peach-pi.h b/include/configs/peach-pi.h
index a1c980d..f724164 100644
--- a/include/configs/peach-pi.h
+++ b/include/configs/peach-pi.h
@@ -44,7 +44,6 @@
#define CONFIG_POWER_TPS65090_EC
#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */
-#define CONFIG_DM_CROS_EC
#define CONFIG_USB_XHCI
#define CONFIG_USB_XHCI_EXYNOS
diff --git a/include/configs/peach-pit.h b/include/configs/peach-pit.h
index 6516a72..de12a9e 100644
--- a/include/configs/peach-pit.h
+++ b/include/configs/peach-pit.h
@@ -44,7 +44,6 @@
#define CONFIG_POWER_TPS65090_EC
#define CONFIG_CROS_EC_SPI /* Support CROS_EC over SPI */
-#define CONFIG_DM_CROS_EC
#define CONFIG_USB_XHCI
#define CONFIG_USB_XHCI_EXYNOS
diff --git a/include/configs/rpi.h b/include/configs/rpi.h
index c94f411..7ad8d08 100644
--- a/include/configs/rpi.h
+++ b/include/configs/rpi.h
@@ -30,12 +30,6 @@
*/
#define CONFIG_MACH_TYPE MACH_TYPE_BCM2708
-/* Enable driver model */
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
-
/* Memory layout */
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_SYS_SDRAM_BASE 0x00000000
@@ -52,7 +46,6 @@
CONFIG_SYS_SDRAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_MALLOC_LEN SZ_4M
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_MEMTEST_START 0x00100000
#define CONFIG_SYS_MEMTEST_END 0x00200000
#define CONFIG_LOADADDR 0x00200000
diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h
index dfa2e07..8fadc68 100644
--- a/include/configs/s5p_goni.h
+++ b/include/configs/s5p_goni.h
@@ -40,7 +40,6 @@
#define CONFIG_CMDLINE_EDITING
/* Size of malloc() pool before and after relocation */
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 << 20))
/*
@@ -290,9 +289,5 @@
#define CONFIG_OF_LIBFDT
#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
#endif /* __CONFIG_H */
diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h
index e9d3f32..5c11650 100644
--- a/include/configs/sandbox.h
+++ b/include/configs/sandbox.h
@@ -23,15 +23,6 @@
#define CONFIG_BOOTSTAGE
#define CONFIG_BOOTSTAGE_REPORT
-#define CONFIG_CMD_DEMO
-#define CONFIG_CMD_DM
-#define CONFIG_DM_DEMO
-#define CONFIG_DM_DEMO_SIMPLE
-#define CONFIG_DM_DEMO_SHAPE
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_TEST
-#define CONFIG_DM_SERIAL
-#define CONFIG_DM_CROS_EC
#define CONFIG_SYS_STDIO_DEREGISTER
@@ -69,7 +60,6 @@
/*
* Size of malloc() pool, before and after relocation
*/
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_MALLOC_F_ADDR 0x0010000
#define CONFIG_SYS_MALLOC_LEN (32 << 20) /* 32MB */
@@ -96,8 +86,6 @@
#define CONFIG_CMD_SF_TEST
#define CONFIG_CMD_SPI
#define CONFIG_SPI_FLASH
-#define CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
#define CONFIG_SPI_FLASH_ATMEL
#define CONFIG_SPI_FLASH_EON
#define CONFIG_SPI_FLASH_GIGADEVICE
@@ -108,7 +96,6 @@
#define CONFIG_SPI_FLASH_STMICRO
#define CONFIG_SPI_FLASH_WINBOND
-#define CONFIG_DM_I2C
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C_SANDBOX
#define CONFIG_I2C_EDID
diff --git a/include/configs/silk.h b/include/configs/silk.h
new file mode 100644
index 0000000..a4235e9
--- /dev/null
+++ b/include/configs/silk.h
@@ -0,0 +1,117 @@
+/*
+ * include/configs/silk.h
+ * This file is silk board configuration.
+ *
+ * Copyright (C) 2015 Renesas Electronics Corporation
+ * Copyright (C) 2015 Cogent Embedded, Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#ifndef __SILK_H
+#define __SILK_H
+
+#undef DEBUG
+#define CONFIG_R8A7794
+#define CONFIG_RMOBILE_BOARD_STRING "Silk"
+
+#include "rcar-gen2-common.h"
+
+#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
+#define CONFIG_SYS_TEXT_BASE 0x70000000
+#else
+#define CONFIG_SYS_TEXT_BASE 0xE6304000
+#endif
+
+#if defined(CONFIG_RMOBILE_EXTRAM_BOOT)
+#define CONFIG_SYS_INIT_SP_ADDR 0x7003FFFC
+#else
+#define CONFIG_SYS_INIT_SP_ADDR 0xE633FFFC
+#endif
+#define STACK_AREA_SIZE 0xC000
+#define LOW_LEVEL_MERAM_STACK \
+ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
+
+/* MEMORY */
+#define RCAR_GEN2_SDRAM_BASE 0x40000000
+#define RCAR_GEN2_SDRAM_SIZE (1024u * 1024 * 1024)
+#define RCAR_GEN2_UBOOT_SDRAM_SIZE (512 * 1024 * 1024)
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE
+#define CONFIG_CONS_SCIF2
+#define CONFIG_SCIF_USE_EXT_CLK
+
+/* FLASH */
+#define CONFIG_SPI
+#define CONFIG_SPI_FLASH_BAR
+#define CONFIG_SH_QSPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_SPI_FLASH_QUAD
+#define CONFIG_SYS_NO_FLASH
+
+/* SH Ether */
+#define CONFIG_NET_MULTI
+#define CONFIG_SH_ETHER
+#define CONFIG_SH_ETHER_USE_PORT 0
+#define CONFIG_SH_ETHER_PHY_ADDR 0x1
+#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_RMII
+#define CONFIG_SH_ETHER_CACHE_WRITEBACK
+#define CONFIG_SH_ETHER_CACHE_INVALIDATE
+#define CONFIG_SH_ETHER_ALIGNE_SIZE 64
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MICREL
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
+
+/* Board Clock */
+#define RMOBILE_XTAL_CLK 20000000u
+#define CONFIG_SYS_CLK_FREQ RMOBILE_XTAL_CLK
+#define CONFIG_SH_TMU_CLK_FREQ (CONFIG_SYS_CLK_FREQ / 2) /* EXT / 2 */
+#define CONFIG_PLL1_CLK_FREQ (CONFIG_SYS_CLK_FREQ * 156 / 2)
+#define CONFIG_P_CLK_FREQ (CONFIG_PLL1_CLK_FREQ / 24)
+#define CONFIG_SH_SCIF_CLK_FREQ 14745600 /* External Clock */
+
+#define CONFIG_SYS_TMU_CLK_DIV 4
+
+/* i2c */
+#define CONFIG_CMD_I2C
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_SH
+#define CONFIG_SYS_I2C_SLAVE 0x7F
+#define CONFIG_SYS_I2C_SH_NUM_CONTROLLERS 3
+#define CONFIG_SYS_I2C_SH_SPEED0 400000
+#define CONFIG_SYS_I2C_SH_SPEED1 400000
+#define CONFIG_SYS_I2C_SH_SPEED2 400000
+#define CONFIG_SH_I2C_DATA_HIGH 4
+#define CONFIG_SH_I2C_DATA_LOW 5
+#define CONFIG_SH_I2C_CLOCK 10000000
+
+#define CONFIG_SYS_I2C_POWERIC_ADDR 0x58 /* da9063 */
+
+/* USB */
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_RMOBILE
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
+
+/* MMCIF */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_MMC
+#define CONFIG_SH_MMCIF
+#define CONFIG_SH_MMCIF_ADDR 0xee200000
+#define CONFIG_SH_MMCIF_CLK 48000000
+
+/* Module stop status bits */
+/* INTC-RT */
+#define CONFIG_SMSTP0_ENA 0x00400000
+/* MSIF */
+#define CONFIG_SMSTP2_ENA 0x00002000
+/* INTC-SYS, IRQC */
+#define CONFIG_SMSTP4_ENA 0x00000180
+/* SCIF2 */
+#define CONFIG_SMSTP7_ENA 0x00080000
+
+#endif /* __SILK_H */
diff --git a/include/configs/smdkc100.h b/include/configs/smdkc100.h
index 982d0dc..080fc3a 100644
--- a/include/configs/smdkc100.h
+++ b/include/configs/smdkc100.h
@@ -48,9 +48,6 @@
*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
-/* Small malloc pool before relocation */
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
-
/*
* select serial console configuration
*/
@@ -224,9 +221,5 @@
#define CONFIG_OF_LIBFDT
#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
#endif /* __CONFIG_H */
diff --git a/include/configs/snapper9260.h b/include/configs/snapper9260.h
index 9fa644f..6c68596 100644
--- a/include/configs/snapper9260.h
+++ b/include/configs/snapper9260.h
@@ -21,11 +21,6 @@
#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768
#define CONFIG_SYS_GENERIC_BOARD
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
/* CPU */
#define CONFIG_ARCH_CPU_INIT
diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h
index 6b1f967..ee227fe 100644
--- a/include/configs/socfpga_common.h
+++ b/include/configs/socfpga_common.h
@@ -190,10 +190,6 @@ unsigned int cm_get_l4_sp_clk_hz(void);
* QSPI support
*/
#ifdef CONFIG_OF_CONTROL /* QSPI is controlled via DT */
-#define CONFIG_CMD_DM
-#define CONFIG_DM
-#define CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
#define CONFIG_CADENCE_QSPI
/* Enable multiple SPI NOR flash manufacturers */
#define CONFIG_SPI_FLASH /* SPI flash subsystem */
@@ -210,9 +206,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void);
#endif
#ifdef CONFIG_OF_CONTROL /* DW SPI is controlled via DT */
-#define CONFIG_CMD_DM
-#define CONFIG_DM
-#define CONFIG_DM_SPI
#define CONFIG_DESIGNWARE_SPI
#define CONFIG_CMD_SPI
#endif
diff --git a/include/configs/stv0991.h b/include/configs/stv0991.h
index fd9bd63..156e0fa 100644
--- a/include/configs/stv0991.h
+++ b/include/configs/stv0991.h
@@ -28,21 +28,10 @@
(PHYS_SDRAM_1_SIZE - CONFIG_ENV_SIZE)
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 16 * 1024)
-#define CONFIG_SYS_MALLOC_F_LEN 0x2000
-#define CONFIG_DM
/* serial port (PL011) configuration */
#define CONFIG_BAUDRATE 115200
-#ifdef CONFIG_DM
-#define CONFIG_DM_SERIAL
#define CONFIG_PL01X_SERIAL
-#else
-#define CONFIG_SYS_SERIAL0 0x80406000
-#define CONFIG_CONS_INDEX 0
-#define CONFIG_PL011_SERIAL
-#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0}
-#define CONFIG_PL011_CLOCK (2700 * 1000)
-#endif
/* user interface */
#define CONFIG_SYS_PROMPT "STV0991> "
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index cea52db..09889ee 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -28,11 +28,7 @@
#define CONFIG_SYS_TEXT_BASE 0x4a000000
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_DM)
-# define CONFIG_CMD_DM
-# define CONFIG_DM_GPIO
-# define CONFIG_DM_SERIAL
# define CONFIG_DW_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
/*
diff --git a/include/configs/tegra-common.h b/include/configs/tegra-common.h
index 8f1e370..005fc6a 100644
--- a/include/configs/tegra-common.h
+++ b/include/configs/tegra-common.h
@@ -18,16 +18,6 @@
#include <asm/arch/tegra.h> /* get chip and board defs */
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_DM_SERIAL
-#endif
-#define CONFIG_DM_SPI
-#define CONFIG_DM_SPI_FLASH
-#define CONFIG_DM_I2C
-
#define CONFIG_SYS_TIMER_RATE 1000000
#define CONFIG_SYS_TIMER_COUNTER NV_PA_TMRUS_BASE
@@ -47,7 +37,6 @@
* Size of malloc() pool
*/
#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MB */
-#define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */
diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h
index 598526b..20a55f4 100644
--- a/include/configs/ti_am335x_common.h
+++ b/include/configs/ti_am335x_common.h
@@ -20,14 +20,7 @@
#define CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
#ifndef CONFIG_SPL_BUILD
-#ifndef CONFIG_DM
-# define CONFIG_DM
-#endif
-# define CONFIG_CMD_DM
-# define CONFIG_DM_GPIO
-# define CONFIG_DM_SERIAL
# define CONFIG_OMAP_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
#include <asm/arch/omap.h>
diff --git a/include/configs/ti_omap3_common.h b/include/configs/ti_omap3_common.h
index 3c634ee..840e108 100644
--- a/include/configs/ti_omap3_common.h
+++ b/include/configs/ti_omap3_common.h
@@ -19,12 +19,7 @@
#include <asm/arch/omap3.h>
#ifndef CONFIG_SPL_BUILD
-# define CONFIG_DM
-# define CONFIG_CMD_DM
-# define CONFIG_DM_GPIO
-# define CONFIG_DM_SERIAL
# define CONFIG_OMAP_SERIAL
-# define CONFIG_SYS_MALLOC_F_LEN (1 << 10)
#endif
/* The chip has SDRC controller */
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index 9420e6b..3f738fb 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -80,8 +80,6 @@
#define CONFIG_SMC911X_BASE CONFIG_SUPPORT_CARD_ETHER_BASE
#define CONFIG_SMC911X_32_BIT
-#define CONFIG_SYS_MALLOC_F_LEN 0x2000
-
/*-----------------------------------------------------------------------
* MMU and Cache Setting
*----------------------------------------------------------------------*/
@@ -192,8 +190,6 @@
#define CONFIG_FAT_WRITE
#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_DM
-
/* memtest works on */
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000)
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index 062e6c2..994874c 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -22,11 +22,6 @@
#define CONFIG_DISPLAY_BOARDINFO_LATE
#define CONFIG_DISPLAY_CPUINFO
-#define CONFIG_DM
-#define CONFIG_CMD_DM
-#define CONFIG_DM_GPIO
-#define CONFIG_DM_SERIAL
-
#define CONFIG_LMB
#define CONFIG_OF_LIBFDT
@@ -192,7 +187,6 @@
#define CONFIG_SYS_STACK_SIZE (32 * 1024)
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN 0x200000
-#define CONFIG_SYS_MALLOC_F_LEN (2 << 10)
/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
diff --git a/include/dm/device.h b/include/dm/device.h
index 81afa8c..7a48eb8 100644
--- a/include/dm/device.h
+++ b/include/dm/device.h
@@ -12,6 +12,7 @@
#define _DM_DEVICE_H
#include <dm/uclass-id.h>
+#include <fdtdec.h>
#include <linker_lists.h>
#include <linux/list.h>
@@ -351,4 +352,13 @@ int device_find_first_child(struct udevice *parent, struct udevice **devp);
*/
int device_find_next_child(struct udevice **devp);
+/**
+ * dev_get_addr() - Get the reg property of a device
+ *
+ * @dev: Pointer to a device
+ *
+ * @return addr
+ */
+fdt_addr_t dev_get_addr(struct udevice *dev);
+
#endif
diff --git a/include/dm/platform_data/serial_sh.h b/include/dm/platform_data/serial_sh.h
new file mode 100644
index 0000000..0271ad6
--- /dev/null
+++ b/include/dm/platform_data/serial_sh.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright (c) 2014 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * Copyright (c) 2014 Renesas Electronics Corporation
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __serial_sh_h
+#define __serial_sh_h
+
+enum sh_clk_mode {
+ INT_CLK,
+ EXT_CLK,
+};
+
+enum sh_serial_type {
+ PORT_SCI,
+ PORT_SCIF,
+ PORT_SCIFA,
+ PORT_SCIFB,
+};
+
+/*
+ * Information about SCIF port
+ *
+ * @base: Register base address
+ * @clk: Input clock rate, used for calculating the baud rate divisor
+ * @clk_mode: Clock mode, set internal (INT) or external (EXT)
+ * @type: Type of SCIF
+ */
+struct sh_serial_platdata {
+ unsigned long base;
+ unsigned int clk;
+ enum sh_clk_mode clk_mode;
+ enum sh_serial_type type;
+};
+#endif /* __serial_sh_h */
diff --git a/include/i2c.h b/include/i2c.h
index 27fe00f..31b0389 100644
--- a/include/i2c.h
+++ b/include/i2c.h
@@ -25,14 +25,13 @@
* enough as to be incompatible for compilation purposes.
*/
-#ifdef CONFIG_DM_I2C
-
enum dm_i2c_chip_flags {
DM_I2C_CHIP_10BIT = 1 << 0, /* Use 10-bit addressing */
DM_I2C_CHIP_RD_ADDRESS = 1 << 1, /* Send address for each read byte */
DM_I2C_CHIP_WR_ADDRESS = 1 << 2, /* Send address for each write byte */
};
+struct udevice;
/**
* struct dm_i2c_chip - information about an i2c chip
*
@@ -125,21 +124,21 @@ int dm_i2c_probe(struct udevice *bus, uint chip_addr, uint chip_flags,
struct udevice **devp);
/**
- * i2c_set_bus_speed() - set the speed of a bus
+ * dm_i2c_set_bus_speed() - set the speed of a bus
*
* @bus: Bus to adjust
* @speed: Requested speed in Hz
* @return 0 if OK, -EINVAL for invalid values
*/
-int i2c_set_bus_speed(struct udevice *bus, unsigned int speed);
+int dm_i2c_set_bus_speed(struct udevice *bus, unsigned int speed);
/**
- * i2c_get_bus_speed() - get the speed of a bus
+ * dm_i2c_get_bus_speed() - get the speed of a bus
*
* @bus: Bus to check
* @return speed of selected I2C bus in Hz, -ve on error
*/
-int i2c_get_bus_speed(struct udevice *bus);
+int dm_i2c_get_bus_speed(struct udevice *bus);
/**
* i2c_set_chip_flags() - set flags for a chip
@@ -439,8 +438,6 @@ int i2c_get_chip_for_busnum(int busnum, int chip_addr, uint offset_len,
int i2c_chip_ofdata_to_platdata(const void *blob, int node,
struct dm_i2c_chip *chip);
-#endif
-
#ifndef CONFIG_DM_I2C
/*
diff --git a/include/net.h b/include/net.h
index 73ea88b..43e3d28 100644
--- a/include/net.h
+++ b/include/net.h
@@ -512,10 +512,6 @@ unsigned add_ip_checksums(unsigned offset, unsigned sum, unsigned new_sum);
*/
int ip_checksum_ok(const void *addr, unsigned nbytes);
-/* Checksum */
-extern int NetCksumOk(uchar *, int); /* Return true if cksum OK */
-extern uint NetCksum(uchar *, int); /* Calculate the checksum */
-
/* Callbacks */
extern rxhand_f *net_get_udp_handler(void); /* Get UDP RX packet handler */
extern void net_set_udp_handler(rxhand_f *); /* Set UDP RX packet handler */
diff --git a/net/net.c b/net/net.c
index 2bea07b..b60ce62 100644
--- a/net/net.c
+++ b/net/net.c
@@ -1086,7 +1086,7 @@ NetReceive(uchar *inpkt, int len)
if ((ip->ip_hl_v & 0x0f) > 0x05)
return;
/* Check the Checksum of the header */
- if (!NetCksumOk((uchar *)ip, IP_HDR_SIZE / 2)) {
+ if (!ip_checksum_ok((uchar *)ip, IP_HDR_SIZE)) {
debug("checksum bad\n");
return;
}
@@ -1291,27 +1291,6 @@ common:
/**********************************************************************/
int
-NetCksumOk(uchar *ptr, int len)
-{
- return !((NetCksum(ptr, len) + 1) & 0xfffe);
-}
-
-
-unsigned
-NetCksum(uchar *ptr, int len)
-{
- ulong xsum;
- ushort *p = (ushort *)ptr;
-
- xsum = 0;
- while (len-- > 0)
- xsum += *p++;
- xsum = (xsum & 0xffff) + (xsum >> 16);
- xsum = (xsum & 0xffff) + (xsum >> 16);
- return xsum & 0xffff;
-}
-
-int
NetEthHdrSize(void)
{
ushort myvlanid;
@@ -1410,7 +1389,7 @@ void net_set_udp_header(uchar *pkt, IPaddr_t dest, int dport, int sport,
net_set_ip_header(pkt, dest, NetOurIP);
ip->ip_len = htons(IP_UDP_HDR_SIZE + len);
ip->ip_p = IPPROTO_UDP;
- ip->ip_sum = ~NetCksum((uchar *)ip, IP_HDR_SIZE >> 1);
+ ip->ip_sum = compute_ip_checksum(ip, IP_HDR_SIZE);
ip->udp_src = htons(sport);
ip->udp_dst = htons(dport);
diff --git a/net/ping.c b/net/ping.c
index 2be56ed..366f518 100644
--- a/net/ping.c
+++ b/net/ping.c
@@ -29,14 +29,14 @@ static void set_icmp_header(uchar *pkt, IPaddr_t dest)
ip->ip_len = htons(IP_ICMP_HDR_SIZE);
ip->ip_p = IPPROTO_ICMP;
- ip->ip_sum = ~NetCksum((uchar *)ip, IP_HDR_SIZE >> 1);
+ ip->ip_sum = compute_ip_checksum(ip, IP_HDR_SIZE);
icmp->type = ICMP_ECHO_REQUEST;
icmp->code = 0;
icmp->checksum = 0;
icmp->un.echo.id = 0;
icmp->un.echo.sequence = htons(PingSeqNo++);
- icmp->checksum = ~NetCksum((uchar *)icmp, ICMP_HDR_SIZE >> 1);
+ icmp->checksum = compute_ip_checksum(icmp, ICMP_HDR_SIZE);
}
static int ping_send(void)
@@ -101,13 +101,11 @@ void ping_receive(struct ethernet_hdr *et, struct ip_udp_hdr *ip, int len)
ip->ip_off = 0;
NetCopyIP((void *)&ip->ip_dst, &ip->ip_src);
NetCopyIP((void *)&ip->ip_src, &NetOurIP);
- ip->ip_sum = ~NetCksum((uchar *)ip,
- IP_HDR_SIZE >> 1);
+ ip->ip_sum = compute_ip_checksum(ip, IP_HDR_SIZE);
icmph->type = ICMP_ECHO_REPLY;
icmph->checksum = 0;
- icmph->checksum = ~NetCksum((uchar *)icmph,
- (len - IP_HDR_SIZE) >> 1);
+ icmph->checksum = compute_ip_checksum(icmph, len - IP_HDR_SIZE);
NetSendPacket((uchar *)et, eth_hdr_size + len);
return;
/* default:
diff --git a/test/Kconfig b/test/Kconfig
new file mode 100644
index 0000000..1fb1716
--- /dev/null
+++ b/test/Kconfig
@@ -0,0 +1 @@
+source "test/dm/Kconfig"
diff --git a/test/dm/Kconfig b/test/dm/Kconfig
new file mode 100644
index 0000000..a9d0298
--- /dev/null
+++ b/test/dm/Kconfig
@@ -0,0 +1,8 @@
+config DM_TEST
+ bool "Enable driver model test command"
+ depends on SANDBOX && CMD_DM
+ help
+ This enables the 'dm test' command which runs a series of unit
+ tests on the driver model code. Each subsystem (uclass) is tested.
+ If all is well then all tests pass although there will be a few
+ messages printed along the way.
diff --git a/test/dm/i2c.c b/test/dm/i2c.c
index ef88372..541b73b 100644
--- a/test/dm/i2c.c
+++ b/test/dm/i2c.c
@@ -67,10 +67,10 @@ static int dm_test_i2c_speed(struct dm_test_state *dms)
ut_assertok(uclass_get_device_by_seq(UCLASS_I2C, busnum, &bus));
ut_assertok(i2c_get_chip(bus, chip, 1, &dev));
- ut_assertok(i2c_set_bus_speed(bus, 100000));
+ ut_assertok(dm_i2c_set_bus_speed(bus, 100000));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
- ut_assertok(i2c_set_bus_speed(bus, 400000));
- ut_asserteq(400000, i2c_get_bus_speed(bus));
+ ut_assertok(dm_i2c_set_bus_speed(bus, 400000));
+ ut_asserteq(400000, dm_i2c_get_bus_speed(bus));
ut_assertok(dm_i2c_read(dev, 0, buf, 5));
ut_asserteq(-EINVAL, dm_i2c_write(dev, 0, buf, 5));