summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/bf609-ezkit/soft_switch.c180
-rw-r--r--board/bf609-ezkit/soft_switch.h71
2 files changed, 251 insertions, 0 deletions
diff --git a/board/bf609-ezkit/soft_switch.c b/board/bf609-ezkit/soft_switch.c
new file mode 100644
index 0000000..2e1404f
--- /dev/null
+++ b/board/bf609-ezkit/soft_switch.c
@@ -0,0 +1,180 @@
+/*
+ * U-boot - main board file
+ *
+ * Copyright (c) 2008-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <common.h>
+#include <asm/blackfin.h>
+#include <asm/io.h>
+#include <i2c.h>
+#include "soft_switch.h"
+
+#define SWITCH_ADDR 0x21
+
+#define NUM_SWITCH 3
+#define IODIRA 0x0
+#define IODIRB 0x1
+#define OLATA 0x14
+#define OLATB 0x15
+
+struct switch_config {
+ uchar dir0; /* IODIRA */
+ uchar dir1; /* IODIRB */
+ uchar value0; /* OLATA */
+ uchar value1; /* OLATB */
+};
+
+static struct switch_config switch_config_array[NUM_SWITCH] = {
+ {
+/*
+ U45 Port A U45 Port B
+
+ 7--------------- RMII_CLK_EN | 7--------------- ~TEMP_THERM_EN
+ | 6------------- ~CNT0ZM_EN | | 6------------- ~TEMP_IRQ_EN
+ | | 5----------- ~CNT0DG_EN | | | 5----------- ~UART0CTS_146_EN
+ | | | 4--------- ~CNT0UD_EN | | | | 4--------- ~UART0CTS_RST_EN
+ | | | | 3------- ~CAN0RX_EN | | | | | 3------- ~UART0CTS_RTS_LPBK
+ | | | | | 2----- ~CAN0_ERR_EN | | | | | | 2----- ~UART0CTS_EN
+ | | | | | | 1--- ~CAN_STB | | | | | | | 1--- ~UART0RX_EN
+ | | | | | | | 0- CAN_EN | | | | | | | | 0- ~UART0RTS_EN
+ | | | | | | | | | | | | | | | | |
+ O O O O O O O O | O O O O O O O O (I/O direction)
+ 1 0 0 0 0 0 1 1 | 1 1 1 1 1 0 0 0 (value being set)
+*/
+ .dir0 = 0x0, /* all output */
+ .dir1 = 0x0, /* all output */
+ .value0 = RMII_CLK_EN | CAN_STB | CAN_EN,
+ .value1 = TEMP_THERM_EN | TEMP_IRQ_EN | UART0CTS_146_EN
+ | UART0CTS_RST_EN | UART0CTS_RTS_LPBK,
+ },
+ {
+/*
+ U46 Port A U46 Port B
+
+ 7--------------- ~LED4_GPIO_EN | 7--------------- EMPTY
+ | 6------------- ~LED3_GPIO_EN | | 6------------- ~SPI0D3_EN
+ | | 5----------- ~LED2_GPIO_EN | | | 5----------- ~SPI0D2_EN
+ | | | 4--------- ~LED1_GPIO_EN | | | | 4--------- ~SPIFLASH_CS_EN
+ | | | | 3------- SMC0_LP0_EN | | | | | 3------- ~SD_WP_EN
+ | | | | | 2----- EMPTY | | | | | | 2----- ~SD_CD_EN
+ | | | | | | 1--- SMC0_EPPI2 | | | | | | | 1--- ~PUSHBUTTON2_EN
+ _LP1_SWITCH
+ | | | | | | | 0- OVERRIDE_SMC0 | | | | | | | | 0- ~PUSHBUTTON1_EN
+ _LP0_BOOT
+ | | | | | | | | | | | | | | | | |
+ O O O O O O O O | O O O O O O O O (I/O direction)
+ 0 0 0 0 0 X 0 1 | X 0 0 0 0 0 0 0 (value being set)
+*/
+ .dir0 = 0x0, /* all output */
+ .dir1 = 0x0, /* all output */
+#ifdef CONFIG_BFIN_LINKPORT
+ .value0 = OVERRIDE_SMC0_LP0_BOOT,
+#else
+ .value0 = SMC0_EPPI2_LP1_SWITCH,
+#endif
+ .value1 = 0x0,
+ },
+ {
+/*
+ U47 Port A U47 Port B
+
+ 7--------------- ~PD2_SPI0MISO | 7--------------- EMPTY
+ _EI3_EN
+ | 6------------- ~PD1_SPI0D3 | | 6------------- EMPTY
+ _EPPI1D17
+ _SPI0SEL2
+ _EI3_EN
+ | | 5----------- ~PD0_SPI0D2 | | | 5----------- EMPTY
+ _EPPI1D16
+ _SPI0SEL3
+ _EI3_EN
+ | | | 4--------- ~WAKE_PUSH | | | | 4--------- EMPTY
+ BUTTON_EN
+ | | | | 3------- ~ETHERNET_EN | | | | | 3------- EMPTY
+ | | | | | 2----- PHYAD0 | | | | | | 2----- EMPTY
+ | | | | | | 1--- PHY_PWR | | | | | | | 1--- ~PD4_SPI0CK_EI3_EN
+ _DWN_INT
+ | | | | | | | 0- ~PHYINT_EN | | | | | | | | 0- ~PD3_SPI0MOSI_EI3_EN
+ | | | | | | | | | | | | | | | | |
+ O O O O O I I O | O O O O O O O O (I/O direction)
+ 1 1 1 0 0 0 0 0 | X X X X X X 1 1 (value being set)
+*/
+ .dir0 = 0x6, /* bits 1 and 2 input, all others output */
+ .dir1 = 0x0, /* all output */
+ .value0 = PD1_SPI0D3_EN | PD0_SPI0D2_EN,
+ .value1 = 0,
+ },
+};
+
+static int setup_soft_switch(int addr, struct switch_config *config)
+{
+ int ret = 0;
+
+ ret = i2c_write(addr, OLATA, 1, &config->value0, 1);
+ if (ret)
+ return ret;
+ ret = i2c_write(addr, OLATB, 1, &config->value1, 1);
+ if (ret)
+ return ret;
+
+ ret = i2c_write(addr, IODIRA, 1, &config->dir0, 1);
+ if (ret)
+ return ret;
+ return i2c_write(addr, IODIRB, 1, &config->dir1, 1);
+}
+
+int config_switch_bit(int num, int port, int bit, int dir, uchar value)
+{
+ int addr = SWITCH_ADDR + num;
+ int ret, data_reg, dir_reg;
+ uchar tmp;
+
+ if (port == IO_PORT_A) {
+ data_reg = OLATA;
+ dir_reg = IODIRA;
+ } else {
+ data_reg = OLATB;
+ dir_reg = IODIRB;
+ }
+
+ if (dir == IO_PORT_INPUT) {
+ ret = i2c_read(addr, dir_reg, 1, &tmp, 1);
+ if (ret)
+ return ret;
+ tmp |= bit;
+ return i2c_write(addr, dir_reg, 1, &tmp, 1);
+ } else {
+ ret = i2c_read(addr, data_reg, 1, &tmp, 1);
+ if (ret)
+ return ret;
+ if (value)
+ tmp |= bit;
+ else
+ tmp &= ~bit;
+ ret = i2c_write(addr, data_reg, 1, &tmp, 1);
+ if (ret)
+ return ret;
+ ret = i2c_read(addr, dir_reg, 1, &tmp, 1);
+ if (ret)
+ return ret;
+ tmp &= ~bit;
+ return i2c_write(addr, dir_reg, 1, &tmp, 1);
+ }
+}
+
+int setup_board_switches(void)
+{
+ int ret;
+ int i;
+
+ for (i = 0; i < NUM_SWITCH; i++) {
+ ret = setup_soft_switch(SWITCH_ADDR + i,
+ &switch_config_array[i]);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
diff --git a/board/bf609-ezkit/soft_switch.h b/board/bf609-ezkit/soft_switch.h
new file mode 100644
index 0000000..8da0e44
--- /dev/null
+++ b/board/bf609-ezkit/soft_switch.h
@@ -0,0 +1,71 @@
+/*
+ * U-boot - main board file
+ *
+ * Copyright (c) 2008-2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __SOFT_SWITCH_H__
+#define __SOFT_SWITCH_H__
+
+/* switch 0 port A */
+#define CAN_EN 0x1
+#define CAN_STB 0x2
+#define CAN0_ERR_EN 0x4
+#define CAN0RX_EN 0x8
+#define CNT0UD_EN 0x10
+#define CNT0DG_EN 0x20
+#define CNT0ZM_EN 0x40
+#define RMII_CLK_EN 0x80
+
+/* switch 0 port B */
+#define UART0RTS_EN 0x1
+#define UART0RX_EN 0x2
+#define UART0CTS_EN 0x4
+#define UART0CTS_RTS_LPBK 0x8
+#define UART0CTS_RST_EN 0x10
+#define UART0CTS_146_EN 0x20
+#define TEMP_IRQ_EN 0x40
+#define TEMP_THERM_EN 0x80
+
+/* switch 1 port A */
+#define OVERRIDE_SMC0_LP0_BOOT 0x1
+#define SMC0_EPPI2_LP1_SWITCH 0x2
+#define SMC0_LP0_EN 0x8
+#define LED1_GPIO_EN 0x10
+#define LED2_GPIO_EN 0x20
+#define LED3_GPIO_EN 0x40
+#define LED4_GPIO_EN 0x80
+
+/* switch 1 port B */
+#define PUSHBUTTON1_EN 0x1
+#define PUSHBUTTON2_EN 0x2
+#define SD_CD_EN 0x4
+#define SD_WP_EN 0x8
+#define SPIFLASH_CS_EN 0x10
+#define SPI0D2_EN 0x20
+#define SPI0D3_EN 0x40
+
+/* switch 2 port A */
+#define PHYINT_EN 0x1
+#define PHY_PWR_DWN_INT 0x2
+#define PHYAD0 0x4
+#define ETHERNET_EN 0x8
+#define WAKE_PUSHBUTTON_EN 0x10
+#define PD0_SPI0D2_EN 0x20
+#define PD1_SPI0D3_EN 0x40
+#define PD2_SPI0MISO_EN 0x80
+
+/* switch 2 port B */
+#define PD3_SPI0MOSI_EN 0x1
+#define PD4_SPI0CK_EN 0x2
+
+#define IO_PORT_A 0
+#define IO_PORT_B 1
+#define IO_PORT_INPUT 0
+#define IO_PORT_OUTPUT 1
+
+int config_switch_bit(int num, int port, int bit, int dir, uchar value);
+int setup_board_switches(void);
+#endif