summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGELOG74
-rw-r--r--board/cm5200/cm5200.c6
-rw-r--r--board/cm5200/cm5200.h2
-rw-r--r--board/cm5200/cmd_cm5200.c2
-rw-r--r--doc/README.generic_usb_ohci5
-rw-r--r--drivers/nand/nand_util.c10
-rw-r--r--drivers/usb_ohci.c11
-rw-r--r--include/configs/cm5200.h21
-rw-r--r--libfdt/fdt_ro.c1
9 files changed, 86 insertions, 46 deletions
diff --git a/CHANGELOG b/CHANGELOG
index 1228908..57299b6 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,3 +1,53 @@
+commit a08458303e7f9db67f296980036d3292c35cb45c
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Fri Jun 29 18:38:51 2007 +0200
+
+ atmel_mci: Fix data timeout value
+
+ Calculate the data timeout based on values from the CSD instead of
+ just using a hardcoded DTOR value. This is a backport of a similar fix
+ in BSP 2.0, with one additional fix: the DTOCYC value is rounded up
+ instead of down.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 0ba8eed28b575626b17e0a7882f923b83e0d7584
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Mon Aug 13 17:22:31 2007 +0200
+
+ AVR32: Include <div64.h> instead of <asm/div64.h>
+
+ include/asm-avr32/div64.h was recently moved to include/div64.h, but
+ cpu/at32ap/interrupts.c wasn't properly updated (an earlier version of
+ the patch was merged perhaps?)
+
+ This patch updates cpu/at32ap/interrupts.c so that the avr32 port
+ compiles again.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit f0d1246ed7cb5a88522244c596d7ae7e6f161283
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed Jun 27 13:34:26 2007 +0200
+
+ atmel_mci: Use 512 byte blocksize if possible
+
+ Instead of always using the largest blocksize the card supports, check
+ if it can support smaller block sizes and use 512 bytes if possible.
+ Most cards do support this, and other parts of u-boot seem to have
+ trouble with block sizes different from 512 bytes.
+
+ Also enable underrun/overrun protection.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+ Acked-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
+
+commit 9986bc3e40e899bea372a99a2bca4071bdf2e24b
+Author: Wolfgang Denk <wd@denx.de>
+Date: Sun Aug 12 21:34:50 2007 +0200
+
+ Update CHANGELOG
+
commit 77d19a8bf3b0b1e401cb9f23c81e2ef419705c1a
Author: Wolfgang Denk <wd@denx.de>
Date: Sun Aug 12 21:34:34 2007 +0200
@@ -3928,6 +3978,30 @@ Date: Fri Jan 5 09:15:34 2007 +0100
Signed-off-by Dan Malek, <dan@embeddedalley.com>
+commit f2134f8e9eb006bdcd729e89f309c07b2fa45180
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed May 2 13:31:53 2007 +0200
+
+ macb: Don't restart autonegotiation if we already have link
+
+ Rework macb_phy_init so that it doesn't attempt to re-negotiate if the
+ link is already up.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
+commit 04fcb5d38bc90779cd9a710d60702075986f0e29
+Author: Haavard Skinnemoen <hskinnemoen@atmel.com>
+Date: Wed May 2 13:22:38 2007 +0200
+
+ macb: Introduce a few barriers when dealing with DMA descriptors
+
+ There were a few theoretical possibilities that the compiler might
+ optimize away DMA descriptor reads and/or writes and thus cause
+ synchronization problems with the hardware. Insert barriers where
+ we depend on reads/writes actually hitting memory.
+
+ Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
+
commit ffa621a0d12a1ccd81c936c567f8917a213787a8
Author: Andy Fleming <afleming@freescale.com>
Date: Sat Feb 24 01:08:13 2007 -0600
diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c
index 6804e33..b74ac08 100644
--- a/board/cm5200/cm5200.c
+++ b/board/cm5200/cm5200.c
@@ -122,7 +122,7 @@ long int initdram(int board_type)
mem_conf_t *mem_conf;
mem_conf = get_mem_config(board_type);
-
+
/* configure SDRAM start/end for detection */
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
@@ -303,7 +303,7 @@ int checkboard(void)
hw_id_t hw_id_tmp;
char module_name_tmp[MODULE_NAME_MAXLEN] = "";
- /*
+ /*
* We need I2C to access HW ID data from EEPROM, so we call i2c_init()
* here despite the fact that it will be called again later on. We
* also use a little trick to silence I2C-related output.
@@ -321,7 +321,7 @@ int checkboard(void)
else
printf("Board: unrecognized cm5200 module (%s)\n",
module_name_tmp);
-
+
return 0;
}
diff --git a/board/cm5200/cm5200.h b/board/cm5200/cm5200.h
index a6cbc88..b2ea5ce 100644
--- a/board/cm5200/cm5200.h
+++ b/board/cm5200/cm5200.h
@@ -138,7 +138,7 @@ static char **hw_id_list[] = {
cmu1_qa_hw_id,
};
-/* indices to the above list - keep in sync */
+/* indices to the above list - keep in sync */
enum {
CM1_QA,
CM11_QA,
diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c
index fd9b914..513c365 100644
--- a/board/cm5200/cmd_cm5200.c
+++ b/board/cm5200/cmd_cm5200.c
@@ -1,7 +1,7 @@
/*
* (C) Copyright 2007 Markus Kappeler <markus.kappeler@objectxp.com>
*
- * Adapted for U-Boot 1.2 by Piotr Kruszynski <ppk@semihalf.com>
+ * Adapted for U-Boot 1.2 by Piotr Kruszynski <ppk@semihalf.com>
*
* See file CREDITS for list of people who contributed to this
* project.
diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci
index c343dfd..494dd1f 100644
--- a/doc/README.generic_usb_ohci
+++ b/doc/README.generic_usb_ohci
@@ -41,7 +41,7 @@ mpc5xxx. For these the config option
CFG_OHCI_BE_CONTROLLER
-needs to be defined.
+needs to be defined.
PCI Controllers
@@ -55,6 +55,3 @@ PCI Controllers need to do byte swapping on register accesses, so they
should to define:
CFG_OHCI_SWAP_REG_ACCESS
-
-
-
diff --git a/drivers/nand/nand_util.c b/drivers/nand/nand_util.c
index aee8727..cf05043 100644
--- a/drivers/nand/nand_util.c
+++ b/drivers/nand/nand_util.c
@@ -209,7 +209,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
}
if (!opts->quiet) {
- unsigned long long n =(unsigned long long)
+ unsigned long long n =(unsigned long long)
(erase.addr+meminfo->erasesize-opts->offset)
* 100;
int percent = (int)do_div(n, erase_length);
@@ -476,8 +476,8 @@ int nand_write_opts(nand_info_t *meminfo, const nand_write_options_t *opts)
imglen -= readlen;
if (!opts->quiet) {
- unsigned long long n = (unsigned long long)
- (opts->length-imglen) * 100;
+ unsigned long long n = (unsigned long long)
+ (opts->length-imglen) * 100;
int percent = (int)do_div(n, opts->length);
/* output progress message only at whole percent
* steps to reduce the number of messages printed
@@ -651,8 +651,8 @@ int nand_read_opts(nand_info_t *meminfo, const nand_read_options_t *opts)
}
if (!opts->quiet) {
- unsigned long long n = (unsigned long long)
- (opts->length-imglen) * 100;
+ unsigned long long n = (unsigned long long)
+ (opts->length-imglen) * 100;
int percent = (int)do_div(n ,opts->length);
/* output progress message only at whole percent
* steps to reduce the number of messages printed
diff --git a/drivers/usb_ohci.c b/drivers/usb_ohci.c
index d6b745f..f0a37b2 100644
--- a/drivers/usb_ohci.c
+++ b/drivers/usb_ohci.c
@@ -132,8 +132,6 @@ int got_rhsc;
/* device which was disconnected */
struct usb_device *devgone;
-
-
/*-------------------------------------------------------------------------*/
/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
@@ -157,7 +155,6 @@ static inline u32 roothub_status (struct ohci *hc)
static u32 roothub_portstatus (struct ohci *hc, int i)
{ return read_roothub (hc, portstatus [i], 0xffe0fce0); }
-
/* forward declaration */
static int hc_interrupt (void);
static void
@@ -412,8 +409,6 @@ static void ohci_dump (ohci_t *controller, int verbose)
ep_print_int_eds (controller, "hcca");
dbg ("hcca frame #%04x", controller->hcca->frame_no);
ohci_dump_roothub (controller, 1);
-}
-
#endif /* DEBUG */
@@ -701,7 +696,6 @@ static void periodic_unlink ( struct ohci *ohci, volatile struct ed *ed,
}
}
-
/* unlink an ed from one of the HC chains.
* just the link to the ed is unlinked.
* the link from the ed still points to another operational ed or 0
@@ -759,7 +753,6 @@ static int ep_unlink (ohci_t *ohci, ed_t *edi)
return 0;
}
-
/*-------------------------------------------------------------------------*/
/* add/reinit an endpoint; this should be done once at the
@@ -939,7 +932,6 @@ static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buf
* Done List handling functions
*-------------------------------------------------------------------------*/
-
/* calculate the transfer length and update the urb */
static void dl_transfer_length(td_t * td)
@@ -951,7 +943,6 @@ static void dl_transfer_length(td_t * td)
tdBE = m32_swap (td->hwBE);
tdCBP = m32_swap (td->hwCBP);
-
if (!(usb_pipetype (lurb_priv->pipe) == PIPE_CONTROL &&
((td->index == 0) || (td->index == lurb_priv->length - 1)))) {
if (tdBE != 0) {
@@ -1094,7 +1085,6 @@ static __u8 root_hub_dev_des[] =
0x01 /* __u8 bNumConfigurations; */
};
-
/* Configuration descriptor */
static __u8 root_hub_config_des[] =
{
@@ -1172,7 +1162,6 @@ static unsigned char root_hub_str_index1[] =
/* Hub class-specific descriptor is constructed dynamically */
-
/*-------------------------------------------------------------------------*/
#define OK(x) len = (x); break
diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h
index 56c0ecb..d554348 100644
--- a/include/configs/cm5200.h
+++ b/include/configs/cm5200.h
@@ -31,7 +31,6 @@
#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
#define CONFIG_CM5200 1 /* ... on CM5200 platform */
-
/*
* Supported commands
*/
@@ -60,7 +59,6 @@
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
#define CONFIG_SILENT_CONSOLE 1 /* needed to silence i2c_init() */
-
/*
* Ethernet configuration
*/
@@ -71,7 +69,6 @@
#define CONFIG_MISC_INIT_R 1
#define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */
-
/*
* POST support
*/
@@ -80,11 +77,9 @@
/* List of I2C addresses to be verified by POST */
#define I2C_ADDR_LIST { CFG_I2C_SLAVE, CFG_I2C_IO, CFG_I2C_EEPROM }
-
/* display image timestamps */
#define CONFIG_TIMESTAMP 1
-
/*
* Autobooting
*/
@@ -137,19 +132,16 @@
""
#define CONFIG_BOOTCOMMAND "run flash_flash"
-
/*
* Low level configuration
*/
-
/*
* Clock configuration
*/
#define CFG_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */
#define CFG_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */
-
/*
* Memory map
*/
@@ -184,7 +176,7 @@
*/
#define CFG_FLASH_CFI 1
#define CFG_FLASH_CFI_DRIVER 1
-#define CFG_FLASH_BASE 0xfc000000
+#define CFG_FLASH_BASE 0xfc000000
/* we need these despite using CFI */
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
#define CFG_MAX_FLASH_SECT 256 /* max num of sectors on one chip */
@@ -215,7 +207,6 @@
#define CFG_CS_BURST 0x00000000
#define CFG_CS_DEADCYCLE 0x00000001
-
/*
* SDRAM configuration
* settings for k4s561632E-xx75, assuming XLB = 132 MHz
@@ -225,8 +216,6 @@
#define SDRAM_CONFIG1 0xE2333900
#define SDRAM_CONFIG2 0x8EE70000
-
-
/*
* MTD configuration
*/
@@ -238,7 +227,6 @@
"2m(kernel),27904k(rootfs)," \
"-(config)"
-
/*
* I2C configuration
*/
@@ -249,13 +237,11 @@
#define CFG_I2C_IO 0x38 /* PCA9554AD I2C I/O port address */
#define CFG_I2C_EEPROM 0x53 /* I2C EEPROM device address */
-
/*
* RTC configuration
*/
#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
-
/*
* USB configuration
*/
@@ -284,7 +270,6 @@
#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
-
/*
* Pin multiplexing configuration
*/
@@ -302,7 +287,6 @@
*/
#define CFG_GPS_PORT_CONFIG 0x10559C44
-
/*
* Miscellaneous configurable options
*/
@@ -322,7 +306,6 @@
#define CFG_LOAD_ADDR 0x100000 /* default load address */
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
-
/*
* Various low-level settings
*/
@@ -334,7 +317,6 @@
#define CFG_XLB_PIPELINING 1 /* enable transaction pipeling */
-
/*
* Cache Configuration
*/
@@ -343,7 +325,6 @@
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
#endif
-
/*
* Flat Device Tree support
*/
diff --git a/libfdt/fdt_ro.c b/libfdt/fdt_ro.c
index ffd9209..46d525d 100644
--- a/libfdt/fdt_ro.c
+++ b/libfdt/fdt_ro.c
@@ -534,4 +534,3 @@ int fdt_get_reservemap(void *fdt, int n, struct fdt_reserve_entry *re)
}
#endif /* CONFIG_OF_LIBFDT */
-