summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--board/bmw/early_init.S1172
-rw-r--r--board/gw8260/flash.c523
-rw-r--r--board/gw8260/gw8260.c659
-rw-r--r--board/mvs1/flash.c719
4 files changed, 3073 insertions, 0 deletions
diff --git a/board/bmw/early_init.S b/board/bmw/early_init.S
new file mode 100644
index 0000000..ec20a67
--- /dev/null
+++ b/board/bmw/early_init.S
@@ -0,0 +1,1172 @@
+#include <ppc_asm.tmpl>
+#include <mpc824x.h>
+#include <ppc_defs.h>
+#include <asm/cache.h>
+#include <asm/mmu.h>
+
+#define USE_V2_INIT 1 /* Jimmy Blair's initialization. */
+
+
+/*
+ * Initialize the MMU using BAT entries and hardwired TLB
+ * This obviates the need for any code in cpu_init_f which
+ * configures the BAT registers.
+*/
+#define MEMORY_MGMT_MSR_BITS (MSR_DR | MSR_IR) /* Data and Inst Relocate */
+ .global iommu_setup
+ /* Initialize IO/MMU mappings via BAT method Ch. 7,
+ * PPC Programming Reference
+ */
+iommu_setup:
+
+/* initialize the BAT registers (SPRs 528 - 543 */
+#define mtibat0u(x) mtspr 528,(x) /* SPR 528 (IBAT0U) */
+#define mtibat0l(x) mtspr 529,(x) /* SPR 529 (IBAT0L) */
+#define mtibat1u(x) mtspr 530,(x) /* SPR 530 (IBAT1U) */
+#define mtibat1l(x) mtspr 531,(x) /* SPR 531 (IBAT1L) */
+#define mtibat2u(x) mtspr 532,(x) /* SPR 532 (IBAT2U) */
+#define mtibat2l(x) mtspr 533,(x) /* SPR 533 (IBAT2L) */
+#define mtibat3u(x) mtspr 534,(x) /* SPR 534 (IBAT3U) */
+#define mtibat3l(x) mtspr 535,(x) /* SPR 535 (IBAT3L) */
+#define mtdbat0u(x) mtspr 536,(x) /* SPR 536 (DBAT0U) */
+#define mtdbat0l(x) mtspr 537,(x) /* SPR 537 (DBAT0L) */
+#define mtdbat1u(x) mtspr 538,(x) /* SPR 538 (DBAT1U) */
+#define mtdbat1l(x) mtspr 539,(x) /* SPR 539 (DBAT1L) */
+#define mtdbat2u(x) mtspr 540,(x) /* SPR 540 (DBAT2U) */
+#define mtdbat2l(x) mtspr 541,(x) /* SPR 541 (DBAT2L) */
+#define mtdbat3u(x) mtspr 542,(x) /* SPR 542 (DBAT3U) */
+#define mtdbat3l(x) mtspr 543,(x) /* SPR 543 (DBAT3L) */
+
+
+/* PowerPC processors do not necessarily initialize the BAT
+ registers on power-up or reset. So they are in an unknown
+ state. Before programming the BATs for the first time, all
+ BAT registers MUST have their Vs and Vp bits cleared in the
+ upper BAT half in order to avoid possibly having 2 BATs
+ valid and mapping the same memory region.
+
+ The reason for this is that, even with address translation
+ disabled, multiple BAT hits for an address are treated as
+ programming errors and can cause unpredictable results.
+
+ It is up to the software to make sure it never has 2 IBAT
+ mappings or 2 DBAT mappings that are valid for the same
+ addresses. It is not necessary to perform this code
+ sequence every time the BATs are programmed, only when
+ there is a possibility that there may be overlapping BAT
+ entries.
+
+ When programming the BATs in non-reset scenarios, even if
+ you are sure that your new mapping will not temporarily
+ create overlapping regions, it is still a wise idea to
+ invalidate a BAT entry by setting its upper BAT register to
+ all 0's before programming it. This will avoid having a
+ BAT marked valid that is in an unknown or transient state
+*/
+
+ addis r5,0,0x0000
+ mtibat0u(r5)
+ mtibat0l(r5)
+ mtibat1u(r5)
+ mtibat1l(r5)
+ mtibat2u(r5)
+ mtibat2l(r5)
+ mtibat3u(r5)
+ mtibat3l(r5)
+ mtdbat0u(r5)
+ mtdbat0l(r5)
+ mtdbat1u(r5)
+ mtdbat1l(r5)
+ mtdbat2u(r5)
+ mtdbat2l(r5)
+ mtdbat3u(r5)
+ mtdbat3l(r5)
+ isync
+
+/*
+ * Set up I/D BAT0
+ */
+ lis r4, CFG_DBAT0L@h
+ ori r4, r4, CFG_DBAT0L@l
+ lis r3, CFG_DBAT0U@h
+ ori r3, r3, CFG_DBAT0U@l
+
+ mtdbat0l(r4)
+ isync
+ mtdbat0u(r3)
+ isync
+ sync
+
+ lis r4, CFG_IBAT0L@h
+ ori r4, r4, CFG_IBAT0L@l
+ lis r3, CFG_IBAT0U@h
+ ori r3, r3, CFG_IBAT0U@l
+
+ isync
+ mtibat0l(r4)
+ isync
+ mtibat0u(r3)
+ isync
+
+/*
+ * Set up I/D BAT1
+ */
+ lis r4, CFG_IBAT1L@h
+ ori r4, r4, CFG_IBAT1L@l
+ lis r3, CFG_IBAT1U@h
+ ori r3, r3, CFG_IBAT1U@l
+
+ isync
+ mtibat1l(r4)
+ isync
+ mtibat1u(r3)
+ isync
+ mtdbat1l(r4)
+ isync
+ mtdbat1u(r3)
+ isync
+ sync
+
+/*
+ * Set up I/D BAT2
+ */
+ lis r4, CFG_IBAT2L@h
+ ori r4, r4, CFG_IBAT2L@l
+ lis r3, CFG_IBAT2U@h
+ ori r3, r3, CFG_IBAT2U@l
+
+ isync
+ mtibat2l(r4)
+ isync
+ mtibat2u(r3)
+ isync
+ mtdbat2l(r4)
+ isync
+ mtdbat2u(r3)
+ isync
+ sync
+
+/*
+ * Setup I/D BAT3
+ */
+ lis r4, CFG_IBAT3L@h
+ ori r4, r4, CFG_IBAT3L@l
+ lis r3, CFG_IBAT3U@h
+ ori r3, r3, CFG_IBAT3U@l
+
+ isync
+ mtibat3l(r4)
+ isync
+ mtibat3u(r3)
+ isync
+ mtdbat3l(r4)
+ isync
+ mtdbat3u(r3)
+ isync
+ sync
+
+
+/*
+ * Invalidate all 64 TLB's
+ */
+ lis r3, 0
+ mtctr r3
+ lis r5, 4
+
+tlblp:
+ tlbie r3
+ sync
+ addi r3, r3, 0x1000
+ cmplw r3, r5
+ blt tlblp
+
+ sync
+
+/*
+ * Enable Data Translation
+ */
+ lis r4, MEMORY_MGMT_MSR_BITS@h
+ ori r4, r4, MEMORY_MGMT_MSR_BITS@l
+ mfmsr r3
+ or r3, r4, r3
+ mtmsr r3
+ isync
+ sync
+
+ blr
+
+
+#ifdef USE_V2_INIT
+/* #define USER_I_CACHE_ENABLE 1*/ /* Fast rom boots */
+/* Macro for hiadjust and lo */
+#define HIADJ(arg) arg@ha
+#define HI(arg) arg@h
+#define LO(arg) arg@l
+
+#undef LOADPTR
+#define LOADPTR(reg,const32) \
+ addis reg,r0,HIADJ(const32); addi reg,reg,LO(const32)
+
+.globl early_init_f
+
+early_init_f:
+/* MPC8245/BMW CPCI System Init
+ * Jimmy Blair, Broadcom Corp, 2002.
+ */
+ mflr r11
+ /* Zero-out registers */
+
+ addis r0,r0,0
+ mtspr SPRG0,r0
+ mtspr SPRG1,r0
+ mtspr SPRG2,r0
+ mtspr SPRG3,r0
+
+ /* Set MPU/MSR to a known state. Turn on FP */
+
+ LOADPTR (r3, MSR_FP)
+ sync
+ mtmsr r3
+ isync
+
+ /* Init the floating point control/status register */
+
+ mtfsfi 7,0x0
+ mtfsfi 6,0x0
+ mtfsfi 5,0x0
+ mtfsfi 4,0x0
+ mtfsfi 3,0x0
+ mtfsfi 2,0x0
+ mtfsfi 1,0x0
+ mtfsfi 0,0x0
+ isync
+
+ /* Set MPU/MSR to a known state. Turn off FP */
+
+#if 1 /* Turn off floating point (remove to keep FP on) */
+ andi. r3, r3, 0
+ sync
+ mtmsr r3
+ isync
+#endif
+
+ /* Init the Segment registers */
+
+ andi. r3, r3, 0
+ isync
+ mtsr 0,r3
+ isync
+ mtsr 1,r3
+ isync
+ mtsr 2,r3
+ isync
+ mtsr 3,r3
+ isync
+ mtsr 4,r3
+ isync
+ mtsr 5,r3
+ isync
+ mtsr 6,r3
+ isync
+ mtsr 7,r3
+ isync
+ mtsr 8,r3
+ isync
+ mtsr 9,r3
+ isync
+ mtsr 10,r3
+ isync
+ mtsr 11,r3
+ isync
+ mtsr 12,r3
+ isync
+ mtsr 13,r3
+ isync
+ mtsr 14,r3
+ isync
+ mtsr 15,r3
+ isync
+
+ /* Turn off data and instruction cache control bits */
+
+ mfspr r3, HID0
+ isync
+ rlwinm r4, r3, 0, 18, 15 /* r4 has ICE and DCE bits cleared */
+ sync
+ isync
+ mtspr HID0, r4 /* HID0 = r4 */
+ isync
+
+ /* Get cpu type */
+
+ mfspr r28, PVR
+ rlwinm r28, r28, 16, 16, 31
+
+ /* invalidate the MPU's data/instruction caches */
+
+ lis r3, 0x0
+ cmpli 0, 0, r28, CPU_TYPE_603
+ beq cpuIs603
+ cmpli 0, 0, r28, CPU_TYPE_603E
+ beq cpuIs603
+ cmpli 0, 0, r28, CPU_TYPE_603P
+ beq cpuIs603
+ cmpli 0, 0, r28, CPU_TYPE_604R
+ bne cpuNot604R
+
+cpuIs604R:
+ lis r3, 0x0
+ mtspr HID0, r3 /* disable the caches */
+ isync
+ ori r4, r4, 0x0002 /* disable BTAC by setting bit 30 */
+
+cpuNot604R:
+ ori r3, r3, (HID0_ICFI |HID0_DCI)
+
+cpuIs603:
+ ori r3, r3, (HID0_ICE | HID0_DCE)
+ or r4, r4, r3 /* set bits */
+ sync
+ isync
+ mtspr HID0, r4 /* HID0 = r4 */
+ andc r4, r4, r3 /* clear bits */
+ isync
+ cmpli 0, 0, r28, CPU_TYPE_604
+ beq cpuIs604
+ cmpli 0, 0, r28, CPU_TYPE_604E
+ beq cpuIs604
+ cmpli 0, 0, r28, CPU_TYPE_604R
+ beq cpuIs604
+ mtspr HID0, r4
+ isync
+
+#ifdef USER_I_CACHE_ENABLE
+ b instCacheOn603
+#else
+ b cacheEnableDone
+#endif
+
+cpuIs604:
+ LOADPTR (r5, 0x1000) /* loop count, 0x1000 */
+ mtspr CTR, r5
+loopDelay:
+ nop
+ bdnz loopDelay
+ isync
+ mtspr HID0, r4
+ isync
+
+ /* turn the Instruction cache ON for faster FLASH ROM boots */
+
+#ifdef USER_I_CACHE_ENABLE
+
+ ori r4, r4, (HID0_ICE | HID0_ICFI)
+ isync /* Synchronize for ICE enable */
+ b writeReg4
+instCacheOn603:
+ ori r4, r4, (HID0_ICE | HID0_ICFI)
+ rlwinm r3, r4, 0, 21, 19 /* clear the ICFI bit */
+
+ /*
+ * The setting of the instruction cache enable (ICE) bit must be
+ * preceded by an isync instruction to prevent the cache from being
+ * enabled or disabled while an instruction access is in progress.
+ */
+ isync
+writeReg4:
+ mtspr HID0, r4 /* Enable Instr Cache & Inval cache */
+ cmpli 0, 0, r28, CPU_TYPE_604
+ beq cacheEnableDone
+ cmpli 0, 0, r28, CPU_TYPE_604E
+ beq cacheEnableDone
+
+ mtspr HID0, r3 /* using 2 consec instructions */
+ /* PPC603 recommendation */
+#endif
+cacheEnableDone:
+
+ /* Detect map A or B */
+
+ addis r5,r0, HI(CHRP_REG_ADDR)
+ addis r6,r0, HI(CHRP_REG_DATA)
+ LOADPTR (r7, KAHLUA_ID) /* Kahlua PCI controller ID */
+ LOADPTR (r8, BMC_BASE)
+
+ stwbrx r8,0,(r5)
+ lwbrx r3,0,(r6) /* Store read value to r3 */
+ cmp 0,0,r3,r7
+ beq cr0, X4_KAHLUA_START
+
+ /* It's not an 8240, is it an 8245? */
+
+ LOADPTR (r7, KAHLUA2_ID) /* Kahlua PCI controller ID */
+ cmp 0,0,r3,r7
+ beq cr0, X4_KAHLUA_START
+
+ /* Save the PCI controller type in r7 */
+ mr r7, r3
+
+ LOADPTR (r5, PREP_REG_ADDR)
+ LOADPTR (r6, PREP_REG_DATA)
+
+X4_KAHLUA_START:
+ /* MPC8245 changes begin here */
+ LOADPTR (r3, MPC107_PCI_CMD) /* PCI command reg */
+ stwbrx r3,0,r5
+ li r4, 6 /* Command register value */
+ sthbrx r4, 0, r6
+
+ LOADPTR (r3, MPC107_PCI_STAT) /* PCI status reg */
+ stwbrx r3,0,r5
+ li r4, -1 /* Write-to-clear all bits */
+ li r3, 2 /* PCI_STATUS is at +2 offset */
+ sthbrx r4, r3, r6
+
+ /*-------PROC_INT1_ADR */
+
+ LOADPTR (r3, PROC_INT1_ADR) /* Processor I/F Config 1 reg. */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0xff141b98)
+ stwbrx r4,0,r6
+
+ /*-------PROC_INT2_ADR */
+
+ LOADPTR (r3, PROC_INT2_ADR) /* Processor I/F Config 2 reg. */
+ stwbrx r3,0,r5
+ lis r4, 0x2000 /* Flush PCI config writes */
+ stwbrx r4,0,r6
+
+ LOADPTR (r9, KAHLUA2_ID)
+ cmpl 0, 0, r7, r9
+ bne L1not8245
+
+ /* MIOCR1 -- turn on bit for DLL delay */
+
+ LOADPTR (r3, MIOCR1_ADR_X)
+ stwbrx r3,0,r5
+ li r4, 0x04
+ stb r4, MIOCR1_SHIFT(r6)
+
+ /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
+ /* SDRAM_CLK_DEL (0x77)*/
+
+ LOADPTR (r3, MIOCR2_ADR_X)
+ stwbrx r3,0,r5
+ li r4, 0x10
+ stb r4, MIOCR2_SHIFT(r6)
+
+ /* PMCR2 -- set PCI hold delay to <10>b for 33 MHz */
+
+ LOADPTR (r3, PMCR2_ADR_X)
+ stwbrx r3,0,r5
+ li r4, 0x20
+ stb r4, PMCR2_SHIFT(r6)
+
+ /* Initialize EUMBBAR early since 8245 has internal UART in EUMB */
+
+ LOADPTR (r3, EUMBBAR)
+ stwbrx r3,0,r5
+ LOADPTR (r4, CFG_EUMB_ADDR)
+ stwbrx r4,0,r6
+
+L1not8245:
+
+ /* Toggle the DLL reset bit in AMBOR */
+
+ LOADPTR (r3, AMBOR)
+ stwbrx r3,0,r5
+ lbz r4, 0(r6)
+
+ andi. r4, r4, 0xdf
+ stb r4, 0(r6) /* Clear DLL_RESET */
+ sync
+
+ ori r4, r4, 0x20 /* Set DLL_RESET */
+ stb r4, 0(r6)
+ sync
+
+ andi. r4, r4, 0xdf
+ stb r4, 0(r6) /* Clear DLL_RESET */
+
+
+ /* Enable RCS2, use supplied timings */
+ LOADPTR (r3, ERCR1)
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0x80408000)
+ stwbrx r4,0,r6
+
+ /* Disable RCS3 parameters */
+ LOADPTR (r3, ERCR2)
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0x00000000)
+ stwbrx r4,0,r6
+
+ /* RCS3 at 0x70000000, 64KBytes */
+ LOADPTR (r3, ERCR2)
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0x00000004)
+ stwbrx r4,0,r6
+
+ /*-------MCCR1 */
+
+#ifdef INCLUDE_ECC
+#define MC_ECC 1
+#else /* INCLUDE_ECC */
+#define MC_ECC 0
+#endif /* INCLUDE_ECC */
+
+#define MC1_ROMNAL 8 /* 0-15 */
+#define MC1_ROMFAL 11 /* 0-31 */
+#define MC1_DBUS_SIZE 0 /* 0-3, read only */
+#define MC1_BURST 0 /* 0-1 */
+#define MC1_MEMGO 0 /* 0-1 */
+#define MC1_SREN 1 /* 0-1 */
+#define MC1_RAM_TYPE 0 /* 0-1 */
+#define MC1_PCKEN MC_ECC /* 0-1 */
+#define MC1_BANKBITS 0x5555 /* 2 bits/bank 7-0 */
+
+ LOADPTR (r3, MEM_CONT1_ADR) /* Set MCCR1 (F0) */
+ stwbrx r3,0,r5
+ LOADPTR(r4, \
+ MC1_ROMNAL << 28 | MC1_ROMFAL << 23 | \
+ MC1_DBUS_SIZE << 21 | MC1_BURST << 20 | \
+ MC1_MEMGO << 19 | MC1_SREN << 18 | \
+ MC1_RAM_TYPE << 17 | MC1_PCKEN << 16 )
+ li r3, MC1_BANKBITS
+ cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
+ bne BankBitsAdd
+ cmpli 0, 0, r3, 0x5555
+ beq K2BankBitsHack /* On 8245, 5555 ==> 0 */
+BankBitsAdd:
+ ori r4, r3, 0
+K2BankBitsHack:
+ stwbrx r4, 0, r6
+
+ /*------- MCCR2 */
+
+#define MC2_TS_WAIT_TIMER 0 /* 0-7 */
+#define MC2_ASRISE 8 /* 0-15 */
+#define MC2_ASFALL 4 /* 0-15 */
+#define MC2_INLINE_PAR_NOT_ECC 0 /* 0-1 */
+#define MC2_WRITE_PARITY_CHK_EN MC_ECC /* 0-1 */
+#define MC2_INLRD_PARECC_CHK_EN MC_ECC /* 0-1 */
+#define MC2_ECC_EN 0 /* 0-1 */
+#define MC2_EDO 0 /* 0-1 */
+/*
+* N.B. This refresh interval looks good up to 85 MHz with Hynix SDRAM.
+* May need to be decreased for 100 MHz
+*/
+#define MC2_REFINT 0x3a5 /* 0-0x3fff */
+#define MC2_RSV_PG 0 /* 0-1 */
+#define MC2_RMW_PAR MC_ECC /* 0-1 */
+
+ LOADPTR (r3, MEM_CONT2_ADR) /* Set MCCR2 (F4) */
+ stwbrx r3,0,r5
+ LOADPTR(r4, \
+ MC2_TS_WAIT_TIMER << 29 | MC2_ASRISE << 25 | \
+ MC2_ASFALL << 21 | MC2_INLINE_PAR_NOT_ECC << 20 | \
+ MC2_WRITE_PARITY_CHK_EN << 19 | \
+ MC2_INLRD_PARECC_CHK_EN << 18 | \
+ MC2_ECC_EN << 17 | MC2_EDO << 16 | \
+ MC2_REFINT << 2 | MC2_RSV_PG << 1 | MC2_RMW_PAR)
+ cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
+ bne notK2
+ /* clear Kahlua2 reserved bits */
+ LOADPTR (r3, 0xfffcffff)
+ and r4, r4, r3
+notK2:
+ stwbrx r4,0,r6
+
+ /*------- MCCR3 */
+
+#define MC_BSTOPRE 0x079 /* 0-0x7ff */
+
+#define MC3_BSTOPRE_U (MC_BSTOPRE >> 4 & 0xf)
+#define MC3_REFREC 8 /* 0-15 */
+#define MC3_RDLAT (4+MC_ECC) /* 0-15 */
+#define MC3_CPX 0 /* 0-1 */
+#define MC3_RAS6P 0 /* 0-15 */
+#define MC3_CAS5 0 /* 0-7 */
+#define MC3_CP4 0 /* 0-7 */
+#define MC3_CAS3 0 /* 0-7 */
+#define MC3_RCD2 0 /* 0-7 */
+#define MC3_RP1 0 /* 0-7 */
+
+ LOADPTR (r3, MEM_CONT3_ADR) /* Set MCCR3 (F8) */
+ stwbrx r3,0,r5
+ LOADPTR(r4, \
+ MC3_BSTOPRE_U << 28 | MC3_REFREC << 24 | \
+ MC3_RDLAT << 20 | MC3_CPX << 19 | \
+ MC3_RAS6P << 15 | MC3_CAS5 << 12 | MC3_CP4 << 9 | \
+ MC3_CAS3 << 6 | MC3_RCD2 << 3 | MC3_RP1)
+ cmpl 0, 0, r7, r9 /* Check for Kahlua2 */
+ bne notK2b
+ /* clear Kahlua2 reserved bits */
+ LOADPTR (r3, 0xff000000)
+ and r4, r4, r3
+notK2b:
+ stwbrx r4,0,r6
+
+ /*------- MCCR4 */
+
+#define MC4_PRETOACT 3 /* 0-15 */
+#define MC4_ACTOPRE 5 /* 0-15 */
+#define MC4_WMODE 0 /* 0-1 */
+#define MC4_INLINE MC_ECC /* 0-1 */
+#define MC4_REGISTERED (1-MC_ECC) /* 0-1 */
+#define MC4_BSTOPRE_UU (MC_BSTOPRE >> 8 & 3)
+#define MC4_REGDIMM 0 /* 0-1 */
+#define MC4_SDMODE_CAS 2 /* 0-7 */
+#define MC4_DBUS_RCS1 1 /* 0-1, 8-bit */
+#define MC4_SDMODE_WRAP 0 /* 0-1 */
+#define MC4_SDMODE_BURST 2 /* 0-7 */
+#define MC4_ACTORW 3 /* 0-15 */
+#define MC4_BSTOPRE_L (MC_BSTOPRE & 0xf)
+
+ LOADPTR (r3, MEM_CONT4_ADR) /* Set MCCR4 (FC) */
+ stwbrx r3,0,r5
+ LOADPTR(r4, \
+ MC4_PRETOACT << 28 | MC4_ACTOPRE << 24 | \
+ MC4_WMODE << 23 | MC4_INLINE << 22 | \
+ MC4_REGISTERED << 20 | MC4_BSTOPRE_UU << 18 | \
+ MC4_DBUS_RCS1 << 17 | \
+ MC4_REGDIMM << 15 | MC4_SDMODE_CAS << 12 | \
+ MC4_SDMODE_WRAP << 11 | MC4_SDMODE_BURST << 8 | \
+ MC4_ACTORW << 4 | MC4_BSTOPRE_L)
+ cmpl 0, 0, r7, r9 /* Check for Kahlua 2 */
+ bne notK2c
+ /* Turn on Kahlua2 extended ROM space */
+ LOADPTR (r3, 0x00200000)
+ or r4, r4, r3
+notK2c:
+ stwbrx r4,0,r6
+
+#ifdef INCLUDE_ECC
+ /*------- MEM_ERREN1 */
+
+ LOADPTR (r3, MEM_ERREN1_ADR) /* Set MEM_ERREN1 (c0) */
+ stwbrx r3,0,r5
+ lwbrx r4,0,r6
+ ori r4,r4,4 /* Set MEM_PERR_EN */
+ stwbrx r4,0,r6
+#endif /* INCLUDE_ECC */
+
+ /*------- MSAR/MEAR */
+
+ LOADPTR (r3, MEM_START1_ADR) /* Set MSAR1 (80) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0xc0804000)
+ stwbrx r4,0,r6
+
+ LOADPTR (r3, MEM_START2_ADR) /* Set MSAR2 (84) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0xc0804000)
+ stwbrx r4,0,r6
+
+ LOADPTR (r3, XMEM_START1_ADR) /* Set MESAR1 (88) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0x00000000)
+ stwbrx r4,0,r6
+
+ LOADPTR (r3, XMEM_START2_ADR) /* Set MESAR2 (8c) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0x01010101)
+ stwbrx r4,0,r6
+
+ LOADPTR (r3, MEM_END1_ADR) /* Set MEAR1 (90) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0xffbf7f3f)
+ stwbrx r4,0,r6
+
+ LOADPTR (r3, MEM_END2_ADR) /* Set MEAR2 (94) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0xffbf7f3f)
+ stwbrx r4,0,r6
+
+ LOADPTR (r3, XMEM_END1_ADR) /* MEEAR1 (98) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0x00000000)
+ stwbrx r4,0,r6
+
+ LOADPTR (r3, XMEM_END2_ADR) /* MEEAR2 (9c) */
+ stwbrx r3,0,r5
+ LOADPTR (r4, 0x01010101)
+ stwbrx r4,0,r6
+
+ /*-------ODCR */
+
+ LOADPTR (r3, ODCR_ADR_X) /* Set ODCR */
+ stwbrx r3,0,r5
+
+ li r4, 0x7f
+ stb r4, ODCR_SHIFT(r6) /* ODCR is at +3 offset */
+
+ /*-------MBEN */
+
+ LOADPTR (r3, MEM_EN_ADR) /* Set MBEN (a0) */
+ stwbrx r3,0,r5
+ li r4, 0x01 /* Enable bank 0 */
+ stb r4, 0(r6) /* MBEN is at +0 offset */
+
+#if 0 /* Jimmy: I think page made is broken */
+ /*-------PGMAX */
+
+ LOADPTR (r3, MPM_ADR_X)
+ stwbrx r3,0,r5
+ li r4, 0x32
+ stb r4, MPM_SHIFT(r6) /* PAGE_MODE is at +3 offset */
+#endif
+
+ /* Wait before initializing other registers */
+
+ lis r4,0x0001
+ mtctr r4
+
+KahluaX4wait200us:
+ bdnz KahluaX4wait200us
+
+ /* Set MEMGO bit */
+
+ LOADPTR (r3, MEM_CONT1_ADR) /* MCCR1 (F0) |= PGMAX */
+ stwbrx r3,0,r5
+ lwbrx r4,0,r6 /* old MCCR1 */
+ oris r4,r4,0x0008 /* MEMGO=1 */
+ stwbrx r4, 0, r6
+
+ /* Wait again */
+
+ addis r4,r0,0x0002
+ ori r4,r4,0xffff
+
+ mtctr r4
+
+KahluaX4wait8ref:
+ bdnz KahluaX4wait8ref
+
+ sync
+ eieio
+ mtlr r11
+ blr
+
+#else /* USE_V2_INIT */
+
+
+
+/* U-Boot works, but memory will not run reliably for all address ranges.
+ * Early U-Boot Working init, but 2.4.19 kernel will crash since memory is not
+ * initialized correctly. Could work if debugged.
+ */
+/* PCI Support routines */
+
+ .globl __pci_config_read_32
+__pci_config_read_32:
+ lis r4, 0xfec0
+ stwbrx r3, r0, r4
+ sync
+ lis r4, 0xfee0
+ lwbrx r3, 0, r4
+ blr
+ .globl __pci_config_read_16
+__pci_config_read_16:
+ lis r4, 0xfec0
+ andi. r5, r3, 2
+ stwbrx r3, r0, r4
+ sync
+ oris r4, r5, 0xfee0
+ lhbrx r3, r0, r4
+ blr
+ .globl __pci_config_read_8
+__pci_config_read_8:
+ lis r4, 0xfec0
+ andi. r5, r3, 3
+ stwbrx r3, r0, r4
+ sync
+ oris r4, r5, 0xfee0
+ lbz r3, 0(4)
+ blr
+ .globl __pci_config_write_32
+__pci_config_write_32:
+ lis r5, 0xfec0
+ stwbrx r3, r0, r5
+ sync
+ lis r5, 0xfee0
+ stwbrx r4, r0, r5
+ sync
+ blr
+ .globl __pci_config_write_16
+__pci_config_write_16:
+ lis r5, 0xfec0
+ andi. r6, r3, 2
+ stwbrx r3, r0, 5
+ sync
+ oris r5, r6, 0xfee0
+ sthbrx r4, r0, r5
+ sync
+ blr
+ .globl __pci_config_write_8
+__pci_config_write_8:
+ lis r5, 0xfec0
+ andi. r6, r3, 3
+ stwbrx r3, r0, r5
+ sync
+ oris r5, r6, 0xfee0
+ stb r4, 0(r5)
+ sync
+ blr
+ .globl in_8
+in_8:
+ oris r3, r3, 0xfe00
+ lbz r3,0(r3)
+ blr
+ .globl in_16
+in_16:
+ oris r3, r3, 0xfe00
+ lhbrx r3, 0, r3
+ blr
+ .globl in_16_ne
+in_16_ne:
+ oris r3, r3, 0xfe00
+ lhzx r3, 0, r3
+ blr
+ .globl in_32
+in_32:
+ oris r3, r3, 0xfe00
+ lwbrx r3, 0, r3
+ blr
+ .globl out_8
+out_8:
+ oris r3, r3, 0xfe00
+ stb r4, 0(r3)
+ eieio
+ blr
+ .globl out_16
+out_16:
+ oris r3, r3, 0xfe00
+ sthbrx r4, 0, r3
+ eieio
+ blr
+ .globl out_16_ne
+out_16_ne:
+ oris r3, r3, 0xfe00
+ sth r4, 0(r3)
+ eieio
+ blr
+ .globl out_32
+out_32:
+ oris r3, r3, 0xfe00
+ stwbrx r4, 0, r3
+ eieio
+ blr
+ .globl read_8
+read_8:
+ lbz r3,0(r3)
+ blr
+ .globl read_16
+read_16:
+ lhbrx r3, 0, r3
+ blr
+ .globl read_32
+read_32:
+ lwbrx r3, 0, r3
+ blr
+ .globl read_32_ne
+read_32_ne:
+ lwz r3, 0(r3)
+ blr
+ .globl write_8
+write_8:
+ stb r4, 0(r3)
+ eieio
+ blr
+ .globl write_16
+write_16:
+ sthbrx r4, 0, r3
+ eieio
+ blr
+ .globl write_32
+write_32:
+ stwbrx r4, 0, r3
+ eieio
+ blr
+ .globl write_32_ne
+write_32_ne:
+ stw r4, 0(r3)
+ eieio
+ blr
+
+
+.globl early_init_f
+
+early_init_f:
+ mflr r11
+ lis r10, 0x8000
+
+ /* PCI Latency Timer */
+ li r4, 0x0d
+ ori r3, r10, PLTR@l
+ bl __pci_config_write_8
+
+ /* Cache Line Size */
+ li r4, 0x08
+ ori r3, r10, PCLSR@l
+ bl __pci_config_write_8
+
+ /* PCI Cmd */
+ li r4, 6
+ ori r3, r10, PCICR@l
+ bl __pci_config_write_16
+
+#if 1
+ /* PCI Stat */
+ ori r3, r10, PCISR@l
+ bl __pci_config_read_16
+ ori r4, r4, 0xffff
+ ori r3, r10, PCISR@l
+ bl __pci_config_write_16
+#endif
+
+ /* PICR1 */
+ lis r4, 0xff14
+ ori r4, r4, 0x1b98
+ ori r3, r10, PICR1@l
+ bl __pci_config_write_32
+
+
+ /* PICR2 */
+ lis r4, 0x0404
+ ori r4, r4, 0x0004
+ ori r3, r10, PICR2@l
+ bl __pci_config_write_32
+
+ /* MIOCR1 */
+ li r4, 0x04
+ ori r3, r10, MIOCR1@l
+ bl __pci_config_write_8
+
+ /* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
+ /* SDRAM_CLK_DEL (0x77)*/
+ li r4, 0x10
+ ori r3, r10, MIOCR2@l
+ bl __pci_config_write_8
+
+ /* EUMBBAR */
+ lis r4, 0xfc00
+ ori r3, r10, EUMBBAR@l
+ bl __pci_config_write_32
+
+ /* AMBOR */
+
+ /* Even if Address Map B is not being used (though it should),
+ * the memory DLL needs to be cleared/set/cleared before using memory.
+ */
+
+ ori r3, r10, AMBOR@l
+ bl __pci_config_read_8 /* get Current bits */
+
+ andi. r4, r4, 0xffdf
+ ori r3, r10, AMBOR@l
+ bl __pci_config_write_16 /* Clear DLL_RESET */
+
+ ori r4, r4, 0x0020
+ ori r3, r10, AMBOR@l
+ bl __pci_config_write_16 /* Set DLL_RESET */
+
+ andi. r4, r4, 0xffdf
+ ori r3, r10, AMBOR@l
+ bl __pci_config_write_16 /* Clear DLL_RESET */
+
+ /* ERCR1 */
+ lis r4, 0x8040 /* Enable RCS2, use supplied timings */
+ ori r4, r4, 0x8000
+ ori r3, r10, ERCR1@l
+ bl __pci_config_write_32
+
+ /* ERCR2 */
+ lis r4, 0x0000 /* Disable RCS3 parms */
+ ori r4, r4, 0x0000
+ ori r3, r10, ERCR2@l
+ bl __pci_config_write_32
+
+ /* ERCR3 */
+ lis r4, 0x0000 /* RCS3 at 0x70000000, 64K bytes */
+ ori r4, r4, 0x0004
+ ori r3, r10, ERCR2@l
+ bl __pci_config_write_32
+
+ /* Preserve memgo bit */
+ /* MCCR1 */
+
+/* lis r4, 0x75a8 / Safe Local ROM = 11+3 clocks */
+ lis r4, 0x75a0 /* Safe Local ROM = 11+3 clocks */
+/* lis r4, 0x73a0 / Fast Local ROM = 7+3 clocks */
+/* oris r4, r4, 0x0010 / Burst ROM/Flash enable */
+/* oris r4, r4, 0x0004 / Self-refresh enable */
+
+/* ori r4,r4,0xFFFF / 16Mbit 2bank SDRAM */
+/* ori r4,r4,0xAAAA / 256Mbit 4bank SDRAM (8245 only) */
+/* ori r4,r4,0x5555 / 64Mbit 2bank SDRAM */
+ ori r4,r4,0x0000 /* 64Mbit 4bank SDRAM */
+
+ ori r3, r10, MCCR1@l
+ bl __pci_config_write_32
+
+ /* MCCR2 */
+
+ lis r4,0x0000
+/* oris r4,r4,0x4000 / TS_WAIT_TIMER = 3 clocks */
+ oris r4,r4,0x1000 /* ASRISE = 8 clocks */
+ oris r4,r4,0x0080 /* ASFALL = 8 clocks */
+/* oris r4,r4,0x0010 / SDRAM Parity (else ECC) */
+/* oris r4,r4,0x0008 / Write parity check */
+/* oris r4,r4,0x0004 / SDRAM inline reads */
+
+
+/* Select a refresh rate; it needs to match the bus speed; if too */
+/* slow, data may be lost; if too fast, performance is lost. We */
+/* use the fastest value so we run at all speeds. */
+/* Refresh = (15600ns/busclk) - (213 (see UM)). */
+
+/* ori r4,r4,0x1d2c / 133 MHz mem bus = 1867 */
+/* ori r4,r4,0x150c / 100 MHz mem bus = 1347 */
+/* ori r4,r4,0x10fc / 83 MHz mem bus = 1087 */
+/* ori r4,r4,0x0cc4 / 66 MHz mem bus = 817 */
+ ori r4,r4,0x04cc /* 33 MHz mem bus (SAFE) = 307 */
+/* ori r4,r4,0x0002 / Reserve a page */
+/* ori r4,r4,0x0001 / RWM parity */
+
+ ori r3, r10, MCCR2@l
+ bl __pci_config_write_32
+
+
+ /* MCCR3 */
+ lis r4,0x0000 /* BSTOPRE_M = 7 (see A/N) */
+ oris r4,r4,0x0500 /* REFREC = 8 clocks */
+ ori r3, r10, MCCR3@l
+ bl __pci_config_write_32
+
+ /* MCCR4 */ /* Turn on registered buffer mode */
+ lis r4, 0x2000 /* PRETOACT = 3 clocks */
+ oris r4,r4,0x0400 /* ACTOPRE = 5 clocks */
+/* oris r4,r4,0x0080 / Enable 8-beat burst (32-bit bus) */
+/* oris r4,r4,0x0040 / Enable Inline ECC/Parity */
+ oris r4,r4,0x0020 /* EXTROM enabled */
+ oris r4,r4,0x0010 /* Registered buffers */
+/* oris r4,r4,0x0000 / BSTOPRE_U = 0 (see A/N) */
+ oris r4,r4,0x0002 /* DBUS_SIZ[2] (8 bit on RCS1) */
+
+/* ori r4,r4,0x8000 / Registered DIMMs */
+ ori r4,r4,0x2000 /*CAS Latency (CL=3) (see RDLAT) */
+/* ori r4,r4,0x2000 / CAS Latency (CL=2) (see RDLAT) */
+/* ori r4,r4,0x0300 / Sequential wrap/8-beat burst */
+ ori r4,r4,0x0200 /* Sequential wrap/4-beat burst */
+ ori r4,r4,0x0030 /* ACTORW = 3 clocks */
+ ori r4,r4,0x0009 /* BSTOPRE_L = 9 (see A/N) */
+
+ ori r3, r10, MCCR4@l
+ bl __pci_config_write_32
+
+ /* MSAR1 */
+ lis r4, 0xc0804000@h
+ ori r4, r4, 0xc0804000@l
+ ori r3, r10, MSAR1@l
+ bl __pci_config_write_32
+
+ /* MSAR2 */
+ lis r4, 0xc0804000@h
+ ori r4, r4, 0xc0804000@l
+ ori r3, r10, MSAR2@l
+ bl __pci_config_write_32
+
+ /* MESAR1 */
+ lis r4, 0x00000000@h
+ ori r4, r4, 0x00000000@l
+ ori r3, r10, EMSAR1@l
+ bl __pci_config_write_32
+
+ /* MESAR2 */
+ lis r4, 0x01010101@h
+ ori r4, r4, 0x01010101@l
+ ori r3, r10, EMSAR2@l
+ bl __pci_config_write_32
+
+ /* MEAR1 */
+ lis r4, 0xffbf7f3f@h
+ ori r4, r4, 0xffbf7f3f@l
+ ori r3, r10, MEAR1@l
+ bl __pci_config_write_32
+
+ /* MEAR2 */
+ lis r4, 0xffbf7f3f@h
+ ori r4, r4, 0xffbf7f3f@l
+ ori r3, r10, MEAR2@l
+ bl __pci_config_write_32
+
+ /* MEEAR1 */
+ lis r4, 0x00000000@h
+ ori r4, r4, 0x00000000@l
+ ori r3, r10, EMEAR1@l
+ bl __pci_config_write_32
+
+ /* MEEAR2 */
+ lis r4, 0x01010101@h
+ ori r4, r4, 0x01010101@l
+ ori r3, r10, EMEAR2@l
+ bl __pci_config_write_32
+
+ /* ODCR */
+ li r4, 0x7f
+ ori r3, r10, ODCR@l
+ bl __pci_config_write_8
+
+ /* MBER */
+ li r4, 0x01
+ ori r3, r10, MBER@l
+ bl __pci_config_write_8
+
+ /* Page CTR aka PGMAX */
+ li r4, 0x32
+ ori r3, r10, 0x70
+ bl __pci_config_write_8
+
+#if 0
+ /* CLK Drive */
+ ori r4, r10, 0xfc01 /* Top bit will be ignored */
+ ori r3, r10, 0x74
+ bl __pci_config_write_16
+#endif
+
+ /* delay */
+ lis r7, 1
+ mtctr r7
+label1: bdnz label1
+
+ /* Set memgo bit */
+ /* MCCR1 */
+ ori r3, r10, MCCR1@l
+ bl __pci_config_read_32
+ lis r7, 0x0008
+ or r4, r3, r7
+ ori r3, r10, MCCR1@l
+ bl __pci_config_write_32
+
+ /* delay again */
+ lis r7, 1
+ mtctr r7
+label2: bdnz label2
+#if 0
+/* DEBUG: Infinite loop, write then read */
+loop:
+ lis r7, 0xffff
+ mtctr r7
+ li r3, 0x5004
+ lis r4, 0xa0a0
+ ori r4, r4, 0x5050
+ bl write_32_ne
+ li r3, 0x5004
+ bl read_32_ne
+ bdnz loop
+#endif
+ mtlr r11
+ blr
+#endif
+
diff --git a/board/gw8260/flash.c b/board/gw8260/flash.c
new file mode 100644
index 0000000..532dd19
--- /dev/null
+++ b/board/gw8260/flash.c
@@ -0,0 +1,523 @@
+/*
+ * (C) Copyright 2000
+ * Marius Groeger <mgroeger@sysgo.de>
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ *
+ * (C) Copyright 2000, 2001
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Oliver Brown <oliverb@alumni.utexas.net>
+ *
+ *--------------------------------------------------------------------
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*********************************************************************/
+/* DESCRIPTION:
+ * This file contains the flash routines for the GW8260 board.
+ *
+ *
+ *
+ * MODULE DEPENDENCY:
+ * None
+ *
+ *
+ * RESTRICTIONS/LIMITATIONS:
+ *
+ * Only supports the following flash devices:
+ * AMD 29F080B
+ * AMD 29F016D
+ *
+ * Copyright (c) 2001, Advent Networks, Inc.
+ *
+ */
+/*********************************************************************/
+
+#include <common.h>
+#include <mpc8260.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+/*********************************************************************/
+/* functions */
+/*********************************************************************/
+
+/*********************************************************************/
+/* NAME: flash_init() - initializes flash banks */
+/* */
+/* DESCRIPTION: */
+/* This function initializes the flash bank(s). */
+/* */
+/* RETURNS: */
+/* The size in bytes of the flash */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+unsigned long flash_init (void)
+{
+ unsigned long size;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* for now, only support the 4 MB Flash SIMM */
+ size = flash_get_size((vu_long *)CFG_FLASH0_BASE, &flash_info[0]);
+
+ /*
+ * protect monitor and environment sectors
+ */
+
+#if CFG_MONITOR_BASE >= CFG_FLASH0_BASE
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+#endif
+
+#if (CFG_ENV_IS_IN_FLASH == 1) && defined(CFG_ENV_ADDR)
+# ifndef CFG_ENV_SIZE
+# define CFG_ENV_SIZE CFG_ENV_SECT_SIZE
+# endif
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ return (CFG_FLASH0_SIZE * 1024 * 1024); /*size*/
+}
+
+/*********************************************************************/
+/* NAME: flash_print_info() - prints flash imformation */
+/* */
+/* DESCRIPTION: */
+/* This function prints the flash information. */
+/* */
+/* INPUTS: */
+/* flash_info_t *info - flash information structure */
+/* */
+/* OUTPUTS: */
+/* Displays flash information to console */
+/* */
+/* RETURNS: */
+/* None */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch ((info->flash_id >> 16) & 0xff) {
+ case 0x1:
+ printf ("AMD ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case AMD_ID_F040B:
+ printf ("AM29F040B (4 Mbit)\n");
+ break;
+ case AMD_ID_F080B:
+ printf ("AM29F080B (8 Mbit)\n");
+ break;
+ case AMD_ID_F016D:
+ printf ("AM29F016D (16 Mbit)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+ return;
+}
+
+/*********************************************************************/
+/* The following code cannot be run from FLASH! */
+/*********************************************************************/
+
+/*********************************************************************/
+/* NAME: flash_get_size() - detects the flash size */
+/* */
+/* DESCRIPTION: */
+/* 1) Reads vendor ID and devices ID from the flash devices. */
+/* 2) Initializes flash info struct. */
+/* 3) Return the flash size */
+/* */
+/* INPUTS: */
+/* vu_long *addr - pointer to start of flash */
+/* flash_info_t *info - flash information structure */
+/* */
+/* OUTPUTS: */
+/* None */
+/* */
+/* RETURNS: */
+/* Size of the flash in bytes, or 0 if device id is unknown. */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* Only supports the following devices: */
+/* AM29F080D */
+/* AM29F016D */
+/* */
+/*********************************************************************/
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+ short i;
+ vu_long vendor, devid;
+ ulong base = (ulong)addr;
+
+ /*printf("addr = %08lx\n", (unsigned long)addr); */
+
+ /* Reset and Write auto select command: read Manufacturer ID */
+ addr[0x0000] = 0xf0f0f0f0;
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0x90909090;
+ udelay (1000);
+
+ vendor = addr[0];
+ /*printf("vendor = %08lx\n", vendor); */
+ if (vendor != 0x01010101) {
+ info->size = 0;
+ goto out;
+ }
+
+ devid = addr[1];
+ /*printf("devid = %08lx\n", devid); */
+
+ if ((devid & 0xff) == AMD_ID_F080B) {
+ info->flash_id = (vendor & 0xff) << 16 | AMD_ID_F080B;
+ /* we have 16 sectors with 64KB each x 4 */
+ info->sector_count = 16;
+ info->size = 4 * info->sector_count * 64*1024;
+ } else if ((devid & 0xff) == AMD_ID_F016D){
+ info->flash_id = (vendor & 0xff) << 16 | AMD_ID_F016D;
+ /* we have 32 sectors with 64KB each x 4 */
+ info->sector_count = 32;
+ info->size = 4 * info->sector_count * 64*1024;
+ } else {
+ info->size = 0;
+ goto out;
+ }
+ /*printf("sector count = %08x\n", info->sector_count); */
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* sector base address */
+ info->start[i] = base + i * (info->size / info->sector_count);
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+ addr = (volatile unsigned long *)(info->start[i]);
+ info->protect[i] = addr[2] & 1;
+ }
+
+ /* reset command */
+ addr = (vu_long *)info->start[0];
+
+ out:
+ addr[0] = 0xf0f0f0f0;
+
+ /*printf("size = %08x\n", info->size); */
+ return info->size;
+}
+
+/*********************************************************************/
+/* NAME: flash_erase() - erases flash by sector */
+/* */
+/* DESCRIPTION: */
+/* This function erases flash sectors starting for s_first to */
+/* s_last. */
+/* */
+/* INPUTS: */
+/* flash_info_t *info - flash information structure */
+/* int s_first - first sector to erase */
+/* int s_last - last sector to erase */
+/* */
+/* OUTPUTS: */
+/* None */
+/* */
+/* RETURNS: */
+/* Returns 0 for success, 1 for failure. */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/*********************************************************************/
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ prot = 0;
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0x80808080;
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ udelay (100);
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+ addr = (vu_long*)(info->start[sect]);
+ addr[0] = 0x30303030;
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+ addr = (vu_long*)(info->start[l_sect]);
+ while ((addr[0] & 0x80808080) != 0x80808080) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ serial_putc ('.');
+ last = now;
+ }
+ }
+
+ DONE:
+ /* reset to read mode */
+ addr = (volatile unsigned long *)info->start[0];
+ addr[0] = 0xF0F0F0F0; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+/*********************************************************************/
+/* NAME: write_buff() - writes a buffer to flash */
+/* */
+/* DESCRIPTION: */
+/* This function copies a buffer, *src, to flash. */
+/* */
+/* INPUTS: */
+/* flash_info_t *info - flash information structure */
+/* uchar *src - pointer to buffer to write to flash */
+/* ulong addr - address to start write at */
+/* ulong cnt - number of bytes to write to flash */
+/* */
+/* OUTPUTS: */
+/* None */
+/* */
+/* RETURNS: */
+/* 0 - OK */
+/* 1 - write timeout */
+/* 2 - Flash not erased */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/*********************************************************************/
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ wp = (addr & ~3); /* get lower word aligned address */
+
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ data = 0;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; (i < 4) && (cnt > 0); ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; (cnt == 0) && (i < 4); ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ }
+
+ /*
+ * handle word aligned part
+ */
+ while (cnt >= 4) {
+ data = 0;
+ for (i = 0; i < 4; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
+ cnt -= 4;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ data = 0;
+ for (i = 0, cp = wp; (i < 4) && (cnt > 0); ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; (i < 4); ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+/*********************************************************************/
+/* NAME: write_word() - writes a word to flash */
+/* */
+/* DESCRIPTION: */
+/* This writes a single word to flash. */
+/* */
+/* INPUTS: */
+/* flash_info_t *info - flash information structure */
+/* ulong dest - address to write */
+/* ulong data - data to write */
+/* */
+/* OUTPUTS: */
+/* None */
+/* */
+/* RETURNS: */
+/* 0 - OK */
+/* 1 - write timeout */
+/* 2 - Flash not erased */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/*********************************************************************/
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long*)(info->start[0]);
+ ulong start;
+ int flag;
+
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[0x0555] = 0xAAAAAAAA;
+ addr[0x02AA] = 0x55555555;
+ addr[0x0555] = 0xA0A0A0A0;
+
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ while ((*((vu_long *)dest) & 0x80808080) != (data & 0x80808080)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ return (0);
+}
+/*********************************************************************/
+/* End of flash.c */
+/*********************************************************************/
diff --git a/board/gw8260/gw8260.c b/board/gw8260/gw8260.c
new file mode 100644
index 0000000..7ca1989
--- /dev/null
+++ b/board/gw8260/gw8260.c
@@ -0,0 +1,659 @@
+/*
+ * (C) Copyright 2000
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Jay Monkman <jtm@smoothsmoothie.com>
+ *
+ * (C) Copyright 2001
+ * Advent Networks, Inc. <http://www.adventnetworks.com>
+ * Oliver Brown <oliverb@alumni.utexas.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*********************************************************************/
+/* DESCRIPTION:
+ * This file contains the board routines for the GW8260 board.
+ *
+ * MODULE DEPENDENCY:
+ * None
+ *
+ * RESTRICTIONS/LIMITATIONS:
+ * None
+ *
+ * Copyright (c) 2001, Advent Networks, Inc.
+ */
+/*********************************************************************/
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc8260.h>
+
+/*
+ * I/O Port configuration table
+ *
+ */
+const iop_conf_t iop_conf_tab[4][32] = {
+
+ /* Port A configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PA31 */ { 1, 0, 0, 1, 0, 0 }, /* TP14 */
+ /* PA30 */ { 1, 1, 1, 1, 0, 0 }, /* US_RTS */
+ /* PA29 */ { 1, 0, 0, 1, 0, 1 }, /* LSSI_DATA */
+ /* PA28 */ { 1, 0, 0, 1, 0, 1 }, /* LSSI_CLK */
+ /* PA27 */ { 1, 0, 0, 1, 0, 0 }, /* TP12 */
+ /* PA26 */ { 1, 0, 0, 0, 0, 0 }, /* IO_STATUS */
+ /* PA25 */ { 1, 0, 0, 0, 0, 0 }, /* IO_CLOCK */
+ /* PA24 */ { 1, 0, 0, 0, 0, 0 }, /* IO_CONFIG */
+ /* PA23 */ { 1, 0, 0, 0, 0, 0 }, /* IO_DONE */
+ /* PA22 */ { 1, 0, 0, 0, 0, 0 }, /* IO_DATA */
+ /* PA21 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD3 */
+ /* PA20 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD2 */
+ /* PA19 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD1 */
+ /* PA18 */ { 1, 1, 0, 1, 0, 0 }, /* US_TXD0 */
+ /* PA17 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD0 */
+ /* PA16 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD1 */
+ /* PA15 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD2 */
+ /* PA14 */ { 1, 1, 0, 0, 0, 0 }, /* DS_RXD3 */
+ /* PA13 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE7 */
+ /* PA12 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE6 */
+ /* PA11 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE5 */
+ /* PA10 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE4 */
+ /* PA9 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE3 */
+ /* PA8 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE2 */
+ /* PA7 */ { 1, 0, 0, 0, 0, 0 }, /* LSSI_IN */
+ /* PA6 */ { 1, 0, 0, 1, 0, 0 }, /* SPARE0 */
+ /* PA5 */ { 1, 0, 0, 1, 0, 0 }, /* DEMOD_RESET_ */
+ /* PA4 */ { 1, 0, 0, 1, 0, 0 }, /* MOD_RESET_ */
+ /* PA3 */ { 1, 0, 0, 1, 0, 0 }, /* IO_RESET */
+ /* PA2 */ { 1, 0, 0, 1, 0, 0 }, /* TX_ENABLE */
+ /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* RX_LOCK */
+ /* PA0 */ { 1, 0, 0, 1, 0, 1 } /* MPC_RESET_ */
+ },
+
+ /* Port B configuration */
+ { /* conf ppar psor pdir podr pdat */
+ /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TX_ER */
+ /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RX_DV */
+ /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FETH0_TX_EN */
+ /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RX_ER */
+ /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_COL */
+ /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_CRS */
+ /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD3 */
+ /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD2 */
+ /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD1 */
+ /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FETH0_TXD0 */
+ /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD0 */
+ /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD1 */
+ /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD2 */
+ /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RXD3 */
+ /* PB17 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RX_DV */
+ /* PB16 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RX_ER */
+ /* PB15 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TX_ER */
+ /* PB14 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TX_EN */
+ /* PB13 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_COL */
+ /* PB12 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_CRS */
+ /* PB11 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD3 */
+ /* PB10 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD2 */
+ /* PB9 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD1 */
+ /* PB8 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RXD0 */
+ /* PB7 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD0 */
+ /* PB6 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD1 */
+ /* PB5 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD2 */
+ /* PB4 */ { 1, 1, 0, 1, 0, 0 }, /* FETH1_TXD3 */
+ /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ },
+
+ /* Port C */
+ { /* conf ppar psor pdir podr pdat */
+ /* PC31 */ { 1, 0, 0, 1, 0, 1 }, /* FAST_RESET_ */
+ /* PC30 */ { 1, 0, 0, 1, 0, 1 }, /* FAST_PAUSE_ */
+ /* PC29 */ { 1, 0, 0, 1, 0, 0 }, /* FAST_SLEW1 */
+ /* PC28 */ { 1, 0, 0, 1, 0, 0 }, /* FAST_SLEW0 */
+ /* PC27 */ { 1, 0, 0, 1, 0, 0 }, /* TP13 */
+ /* PC26 */ { 1, 0, 0, 0, 0, 0 }, /* RXDECDFLG */
+ /* PC25 */ { 1, 0, 0, 0, 0, 0 }, /* RXACQFAIL */
+ /* PC24 */ { 1, 0, 0, 0, 0, 0 }, /* RXACQFLG */
+ /* PC23 */ { 1, 0, 0, 1, 0, 0 }, /* WD_TCL */
+ /* PC22 */ { 1, 0, 0, 1, 0, 0 }, /* WD_EN */
+ /* PC21 */ { 1, 0, 0, 1, 0, 0 }, /* US_TXCLK */
+ /* PC20 */ { 1, 0, 0, 0, 0, 0 }, /* DS_RXCLK */
+ /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_RX_CLK */
+ /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FETH0_TX_CLK */
+ /* PC17 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_RX_CLK */
+ /* PC16 */ { 1, 1, 0, 0, 0, 0 }, /* FETH1_TX_CLK */
+ /* PC15 */ { 1, 0, 0, 1, 0, 0 }, /* TX_SHUTDOWN_ */
+ /* PC14 */ { 1, 0, 0, 0, 0, 0 }, /* RS_232_DTR_ */
+ /* PC13 */ { 1, 0, 0, 0, 0, 0 }, /* TXERR */
+ /* PC12 */ { 1, 0, 0, 1, 0, 1 }, /* FETH1_MDDIS */
+ /* PC11 */ { 1, 0, 0, 1, 0, 1 }, /* FETH0_MDDIS */
+ /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* MDC */
+ /* PC9 */ { 1, 0, 0, 1, 1, 1 }, /* MDIO */
+ /* PC8 */ { 1, 0, 0, 1, 1, 1 }, /* SER_NUM */
+ /* PC7 */ { 1, 1, 0, 0, 0, 0 }, /* US_CTS */
+ /* PC6 */ { 1, 1, 0, 0, 0, 0 }, /* DS_CD_ */
+ /* PC5 */ { 1, 0, 0, 1, 0, 0 }, /* FETH1_PWRDWN */
+ /* PC4 */ { 1, 0, 0, 1, 0, 0 }, /* FETH0_PWRDWN */
+ /* PC3 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED3 */
+ /* PC2 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED2 */
+ /* PC1 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED1 */
+ /* PC0 */ { 1, 0, 0, 1, 0, 1 }, /* MPULED0 */
+ },
+
+ /* Port D */
+ { /* conf ppar psor pdir podr pdat */
+ /* PD31 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD30 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD29 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD28 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD27 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD26 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD25 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD24 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD23 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD22 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD21 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD20 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD19 */ { 1, 1, 1, 0, 0, 0 }, /* not used */
+ /* PD18 */ { 1, 1, 1, 0, 0, 0 }, /* not used */
+ /* PD17 */ { 1, 1, 1, 0, 0, 0 }, /* not used */
+ /* PD16 */ { 1, 1, 1, 0, 0, 0 }, /* not used */
+ /* PD15 */ { 1, 1, 1, 0, 1, 1 }, /* SDRAM_SDA */
+ /* PD14 */ { 1, 1, 1, 0, 1, 1 }, /* SDRAM_SCL */
+ /* PD13 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED7 */
+ /* PD12 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED6 */
+ /* PD11 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED5 */
+ /* PD10 */ { 1, 0, 0, 1, 0, 0 }, /* MPULED4 */
+ /* PD9 */ { 1, 1, 0, 1, 0, 0 }, /* RS232_TXD */
+ /* PD8 */ { 1, 1, 0, 0, 0, 0 }, /* RD232_RXD */
+ /* PD7 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD6 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD5 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD4 */ { 1, 0, 0, 0, 0, 0 }, /* not used */
+ /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
+ /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
+ }
+};
+
+/*********************************************************************/
+/* NAME: checkboard() - Displays the board type and serial number */
+/* */
+/* OUTPUTS: */
+/* Displays the board type and serial number */
+/* */
+/* RETURNS: */
+/* Always returns 1 */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+int checkboard(void)
+{
+ char *str;
+ puts ("Board: Advent Networks gw8260\n");
+
+ str = getenv("serial#");
+ if (str != NULL) {
+ printf("SN: %s\n", str);
+ }
+ return 0;
+}
+
+
+#if defined (CFG_DRAM_TEST)
+/*********************************************************************/
+/* NAME: move64() - moves a double word (64-bit) */
+/* */
+/* DESCRIPTION: */
+/* this function performs a double word move from the data at */
+/* the source pointer to the location at the destination pointer. */
+/* */
+/* INPUTS: */
+/* unsigned long long *src - pointer to data to move */
+/* */
+/* OUTPUTS: */
+/* unsigned long long *dest - pointer to locate to move data */
+/* */
+/* RETURNS: */
+/* None */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* May cloober fr0. */
+/* */
+/*********************************************************************/
+static void move64(unsigned long long *src, unsigned long long *dest)
+{
+ asm ("lfd 0, 0(3)\n\t" /* fpr0 = *scr */
+ "stfd 0, 0(4)" /* *dest = fpr0 */
+ : : : "fr0" ); /* Clobbers fr0 */
+ return;
+}
+
+
+#if defined (CFG_DRAM_TEST_DATA)
+
+unsigned long long pattern[]= {
+ 0xaaaaaaaaaaaaaaaa,
+ 0xcccccccccccccccc,
+ 0xf0f0f0f0f0f0f0f0,
+ 0xff00ff00ff00ff00,
+ 0xffff0000ffff0000,
+ 0xffffffff00000000,
+ 0x00000000ffffffff,
+ 0x0000ffff0000ffff,
+ 0x00ff00ff00ff00ff,
+ 0x0f0f0f0f0f0f0f0f,
+ 0x3333333333333333,
+ 0x5555555555555555};
+
+/*********************************************************************/
+/* NAME: mem_test_data() - test data lines for shorts and opens */
+/* */
+/* DESCRIPTION: */
+/* Tests data lines for shorts and opens by forcing adjacent data */
+/* to opposite states. Because the data lines could be routed in */
+/* an arbitrary manner the must ensure test patterns ensure that */
+/* every case is tested. By using the following series of binary */
+/* patterns every combination of adjacent bits is test regardless */
+/* of routing. */
+/* */
+/* ...101010101010101010101010 */
+/* ...110011001100110011001100 */
+/* ...111100001111000011110000 */
+/* ...111111110000000011111111 */
+/* */
+/* Carrying this out, gives us six hex patterns as follows: */
+/* */
+/* 0xaaaaaaaaaaaaaaaa */
+/* 0xcccccccccccccccc */
+/* 0xf0f0f0f0f0f0f0f0 */
+/* 0xff00ff00ff00ff00 */
+/* 0xffff0000ffff0000 */
+/* 0xffffffff00000000 */
+/* */
+/* The number test patterns will always be given by: */
+/* */
+/* log(base 2)(number data bits) = log2 (64) = 6 */
+/* */
+/* To test for short and opens to other signals on our boards. we */
+/* simply */
+/* test with the 1's complemnt of the paterns as well. */
+/* */
+/* OUTPUTS: */
+/* Displays failing test pattern */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* Assumes only one one SDRAM bank */
+/* */
+/*********************************************************************/
+int mem_test_data(void)
+{
+ unsigned long long * pmem =
+ (unsigned long long *)CFG_SDRAM_BASE ;
+ unsigned long long temp64;
+ int num_patterns = sizeof(pattern)/ sizeof(pattern[0]);
+ int i;
+ unsigned int hi, lo;
+
+ for ( i = 0; i < num_patterns; i++) {
+ move64(&(pattern[i]), pmem);
+ move64(pmem, &temp64);
+
+ /* hi = (temp64>>32) & 0xffffffff; */
+ /* lo = temp64 & 0xffffffff; */
+ /* printf("\ntemp64 = 0x%08x%08x", hi, lo); */
+
+ hi = (pattern[i]>>32) & 0xffffffff;
+ lo = pattern[i] & 0xffffffff;
+ /* printf("\npattern[%d] = 0x%08x%08x", i, hi, lo); */
+
+ if (temp64 != pattern[i]){
+ printf ("\n Data Test Failed, pattern 0x%08x%08x", hi, lo);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+#endif /* CFG_DRAM_TEST_DATA */
+
+#if defined (CFG_DRAM_TEST_ADDRESS)
+/*********************************************************************/
+/* NAME: mem_test_address() - test address lines */
+/* */
+/* DESCRIPTION: */
+/* This function performs a test to verify that each word im */
+/* memory is uniquly addressable. The test sequence is as follows: */
+/* */
+/* 1) write the address of each word to each word. */
+/* 2) verify that each location equals its address */
+/* */
+/* OUTPUTS: */
+/* Displays failing test pattern and address */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+int mem_test_address(void)
+{
+ volatile unsigned int * pmem = (volatile unsigned int *)CFG_SDRAM_BASE ;
+ const unsigned int size = (CFG_SDRAM_SIZE * 1024 * 1024)/4;
+ unsigned int i;
+
+ /* write address to each location */
+ for ( i = 0; i < size; i++) {
+ pmem[i] = i;
+ }
+
+ /* verify each loaction */
+ for ( i = 0; i < size; i++) {
+ if (pmem[i] != i) {
+ printf("\n Address Test Failed at 0x%x", i);
+ return 1;
+ }
+ }
+ return 0;
+}
+#endif /* CFG_DRAM_TEST_ADDRESS */
+
+#if defined (CFG_DRAM_TEST_WALK)
+/*********************************************************************/
+/* NAME: mem_march() - memory march */
+/* */
+/* DESCRIPTION: */
+/* Marches up through memory. At each location verifies rmask if */
+/* read = 1. At each location write wmask if write = 1. Displays */
+/* failing address and pattern. */
+/* */
+/* INPUTS: */
+/* volatile unsigned long long * base - start address of test */
+/* unsigned int size - number of dwords(64-bit) to test */
+/* unsigned long long rmask - read verify mask */
+/* unsigned long long wmask - wrtie verify mask */
+/* short read - verifies rmask if read = 1 */
+/* short write - writes wmask if write = 1 */
+/* */
+/* OUTPUTS: */
+/* Displays failing test pattern and address */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+int mem_march(volatile unsigned long long * base,
+ unsigned int size,
+ unsigned long long rmask,
+ unsigned long long wmask,
+ short read,
+ short write)
+{
+ unsigned int i;
+ unsigned long long temp;
+ unsigned int hitemp, lotemp, himask, lomask;
+
+ for (i = 0 ; i < size ; i++) {
+ if (read != 0) {
+ /* temp = base[i]; */
+ move64 ((unsigned long long *)&(base[i]), &temp);
+ if (rmask != temp) {
+ hitemp = (temp>>32) & 0xffffffff;
+ lotemp = temp & 0xffffffff;
+ himask = (rmask>>32) & 0xffffffff;
+ lomask = rmask & 0xffffffff;
+
+ printf("\n Walking one's test failed: address = 0x%08x,"
+ "\n\texpected 0x%08x%08x, found 0x%08x%08x",
+ i<<3, himask, lomask, hitemp, lotemp);
+ return 1;
+ }
+ }
+ if ( write != 0 ) {
+ /* base[i] = wmask; */
+ move64 (&wmask, (unsigned long long *)&(base[i]));
+ }
+ }
+ return 0;
+}
+#endif /* CFG_DRAM_TEST_WALK */
+
+/*********************************************************************/
+/* NAME: mem_test_walk() - a simple walking ones test */
+/* */
+/* DESCRIPTION: */
+/* Performs a walking ones through entire physical memory. The */
+/* test uses as series of memory marches, mem_march(), to verify */
+/* and write the test patterns to memory. The test sequence is as */
+/* follows: */
+/* 1) march writing 0000...0001 */
+/* 2) march verifying 0000...0001 , writing 0000...0010 */
+/* 3) repeat step 2 shifting masks left 1 bit each time unitl */
+/* the write mask equals 1000...0000 */
+/* 4) march verifying 1000...0000 */
+/* The test fails if any of the memory marches return a failure. */
+/* */
+/* OUTPUTS: */
+/* Displays which pass on the memory test is executing */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+int mem_test_walk(void)
+{
+ unsigned long long mask;
+ volatile unsigned long long * pmem =
+ (volatile unsigned long long *)CFG_SDRAM_BASE ;
+ const unsigned long size = (CFG_SDRAM_SIZE * 1024 * 1024)/8;
+
+ unsigned int i;
+ mask = 0x01;
+
+ printf("Initial Pass");
+ mem_march(pmem,size,0x0,0x1,0,1);
+
+ printf("\b\b\b\b\b\b\b\b\b\b\b\b");
+ printf(" ");
+ printf("\b\b\b\b\b\b\b\b\b\b\b\b");
+
+ for (i = 0 ; i < 63 ; i++) {
+ printf("Pass %2d", i+2);
+ if ( mem_march(pmem,size, mask,mask << 1, 1, 1) != 0 ){
+ /*printf("mask: 0x%x, pass: %d, ", mask, i);*/
+ return 1;
+ }
+ mask = mask<<1;
+ printf("\b\b\b\b\b\b\b");
+ }
+
+ printf("Last Pass");
+ if (mem_march(pmem, size, 0, mask, 0, 1) != 0) {
+ /* printf("mask: 0x%x", mask); */
+ return 1;
+ }
+ printf("\b\b\b\b\b\b\b\b\b");
+ printf(" ");
+ printf("\b\b\b\b\b\b\b\b\b");
+
+ return 0;
+}
+
+/*********************************************************************/
+/* NAME: testdram() - calls any enabled memory tests */
+/* */
+/* DESCRIPTION: */
+/* Runs memory tests if the environment test variables are set to */
+/* 'y'. */
+/* */
+/* INPUTS: */
+/* testdramdata - If set to 'y', data test is run. */
+/* testdramaddress - If set to 'y', address test is run. */
+/* testdramwalk - If set to 'y', walking ones test is run */
+/* */
+/* OUTPUTS: */
+/* None */
+/* */
+/* RETURNS: */
+/* 0 - Passed test */
+/* 1 - Failed test */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+int testdram(void)
+{
+ char *s;
+ int rundata, runaddress, runwalk;
+
+ s = getenv ("testdramdata");
+ rundata = (s && (*s == 'y')) ? 1 : 0;
+ s = getenv ("testdramaddress");
+ runaddress = (s && (*s == 'y')) ? 1 : 0;
+ s = getenv ("testdramwalk");
+ runwalk = (s && (*s == 'y')) ? 1 : 0;
+
+ if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
+ printf("Testing RAM ... ");
+ }
+#ifdef CFG_DRAM_TEST_DATA
+ if (rundata == 1) {
+ if (mem_test_data() == 1){
+ return 1;
+ }
+ }
+#endif
+#ifdef CFG_DRAM_TEST_ADDRESS
+ if (runaddress == 1) {
+ if (mem_test_address() == 1){
+ return 1;
+ }
+ }
+#endif
+#ifdef CFG_DRAM_TEST_WALK
+ if (runwalk == 1) {
+ if (mem_test_walk() == 1){
+ return 1;
+ }
+ }
+#endif
+ if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
+ printf("passed");
+ }
+ return 0;
+
+}
+#endif /* CFG_DRAM_TEST */
+
+/*********************************************************************/
+/* NAME: initdram() - initializes SDRAM controller */
+/* */
+/* DESCRIPTION: */
+/* Initializes the MPC8260's SDRAM controller. */
+/* */
+/* INPUTS: */
+/* CFG_IMMR - MPC8260 Internal memory map */
+/* CFG_SDRAM_BASE - Physical start address of SDRAM */
+/* CFG_PSDMR - SDRAM mode register */
+/* CFG_MPTPR - Memory refresh timer prescaler register */
+/* CFG_SDRAM0_SIZE - SDRAM size */
+/* */
+/* RETURNS: */
+/* SDRAM size in bytes */
+/* */
+/* RESTRICTIONS/LIMITATIONS: */
+/* */
+/* */
+/*********************************************************************/
+long int initdram(int board_type)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8260_t *memctl = &immap->im_memctl;
+ volatile uchar c = 0, *ramaddr = (uchar *)(CFG_SDRAM_BASE + 0x8);
+ ulong psdmr = CFG_PSDMR;
+ int i;
+
+ /*
+ * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
+ *
+ * "At system reset, initialization software must set up the
+ * programmable parameters in the memory controller banks registers
+ * (ORx, BRx, P/LSDMR). After all memory parameters are configured,
+ * system software should execute the following initialization sequence
+ * for each SDRAM device.
+ *
+ * 1. Issue a PRECHARGE-ALL-BANKS command
+ * 2. Issue eight CBR REFRESH commands
+ * 3. Issue a MODE-SET command to initialize the mode register
+ *
+ * The initial commands are executed by setting P/LSDMR[OP] and
+ * accessing the SDRAM with a single-byte transaction."
+ *
+ * The appropriate BRx/ORx registers have already been set when we
+ * get here. The SDRAM can be accessed at the address CFG_SDRAM_BASE.
+ */
+
+ memctl->memc_psrt = CFG_PSRT;
+ memctl->memc_mptpr = CFG_MPTPR;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_PREA;
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_CBRR;
+ for (i = 0; i < 8; i++){
+ *ramaddr = c;
+ }
+ memctl->memc_psdmr = psdmr | PSDMR_OP_MRW;
+ *ramaddr = c;
+
+ memctl->memc_psdmr = psdmr | PSDMR_OP_NORM | PSDMR_RFEN;
+ *ramaddr = c;
+
+ /* return total ram size */
+ return (CFG_SDRAM0_SIZE * 1024 * 1024);
+}
+
+/*********************************************************************/
+/* End of gw8260.c */
+/*********************************************************************/
diff --git a/board/mvs1/flash.c b/board/mvs1/flash.c
new file mode 100644
index 0000000..75d9048
--- /dev/null
+++ b/board/mvs1/flash.c
@@ -0,0 +1,719 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Changes for MATRIX Vision MVsensor (C) Copyright 2001
+ * MATRIX Vision GmbH / hg, info@matrix-vision.de
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+#undef MVDEBUG
+#ifdef MVDEBUG
+#define mvdebug debug
+#else
+#define mvdebug(p) do {} while (0)
+#endif
+
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+
+#ifdef CONFIG_MVS_16BIT_FLASH
+ #define FLASH_DATA_MASK 0xffff
+ #define FLASH_SHIFT 0
+#else
+ #define FLASH_DATA_MASK 0xffffffff
+ #define FLASH_SHIFT 1
+#endif
+
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *address, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+static void flash_get_offsets (ulong base, flash_info_t *info);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+ volatile immap_t *immap = (immap_t *)CFG_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ unsigned long size_b0, size_b1;
+ int i;
+
+ /* Init: no FLASHes known */
+ for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0<<20);
+ }
+
+#if defined (FLASH_BASE1_PRELIM)
+ size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
+
+ if (size_b1 > size_b0) {
+ printf ("## ERROR: "
+ "Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
+ size_b1, size_b1<<20,
+ size_b0, size_b0<<20
+ );
+ flash_info[0].flash_id = FLASH_UNKNOWN;
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[0].sector_count = -1;
+ flash_info[1].sector_count = -1;
+ flash_info[0].size = 0;
+ flash_info[1].size = 0;
+ return (0);
+ }
+#else
+ size_b1 = 0;
+#endif
+
+ /* Remap FLASH according to real size */
+ memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
+#ifdef CONFIG_MVS_16BIT_FLASH
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_16 | BR_MS_GPCM | BR_V;
+#else
+ memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_PS_32 | BR_MS_GPCM | BR_V;
+#endif
+
+ /* Re-do sizing to get full correct info */
+ size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+ flash_get_offsets (CFG_FLASH_BASE, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[0]);
+
+ if (size_b1) {
+ memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+#ifdef CONFIG_MVS_16BIT_FLASH
+ memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+ BR_PS_16 | BR_MS_GPCM | BR_V;
+#else
+ memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+ BR_PS_32 | BR_MS_GPCM | BR_V;
+#endif
+ /* Re-do sizing to get full correct info */
+ size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+ &flash_info[1]);
+
+ flash_get_offsets (CFG_FLASH_BASE + size_b0, &flash_info[1]);
+
+ /* monitor protection ON by default */
+ flash_protect(FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE+CFG_MONITOR_LEN-1,
+ &flash_info[1]);
+ } else {
+ memctl->memc_br1 = 0; /* invalidate bank */
+
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+
+ return (size_b0 + size_b1);
+}
+
+/*-----------------------------------------------------------------------
+ */
+static void flash_get_offsets (ulong base, flash_info_t *info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (info->flash_id & FLASH_BTYPE)
+ { /* bottom boot sector types - these are the useful ones! */
+ /* set sector offsets for bottom boot block type */
+ if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B)
+ { /* AMDLV320B has 8 x 8k bottom boot sectors */
+ for (i = 0; i < 8; i++) /* +8k */
+ info->start[i] = base + (i * (0x00002000 << FLASH_SHIFT));
+ for (; i < info->sector_count; i++) /* +64k */
+ info->start[i] = base + (i * (0x00010000 << FLASH_SHIFT)) - (0x00070000 << FLASH_SHIFT);
+ }
+ else
+ { /* other types have 4 bottom boot sectors (16,8,8,32) */
+ i = 0;
+ info->start[i++] = base + 0x00000000; /* - */
+ info->start[i++] = base + (0x00004000 << FLASH_SHIFT); /* +16k */
+ info->start[i++] = base + (0x00006000 << FLASH_SHIFT); /* +8k */
+ info->start[i++] = base + (0x00008000 << FLASH_SHIFT); /* +8k */
+ info->start[i++] = base + (0x00010000 << FLASH_SHIFT); /* +32k */
+ for (; i < info->sector_count; i++) /* +64k */
+ info->start[i] = base + (i * (0x00010000 << FLASH_SHIFT)) - (0x00030000 << FLASH_SHIFT);
+ }
+ }
+ else
+ { /* top boot sector types - not so useful */
+ /* set sector offsets for top boot block type */
+ if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320T)
+ { /* AMDLV320T has 8 x 8k top boot sectors */
+ for (i = 0; i < info->sector_count - 8; i++) /* +64k */
+ info->start[i] = base + (i * (0x00010000 << FLASH_SHIFT));
+ for (; i < info->sector_count; i++) /* +8k */
+ info->start[i] = base + (i * (0x00002000 << FLASH_SHIFT));
+ }
+ else
+ { /* other types have 4 top boot sectors (32,8,8,16) */
+ for (i = 0; i < info->sector_count - 4; i++) /* +64k */
+ info->start[i] = base + (i * (0x00010000 << FLASH_SHIFT));
+
+ info->start[i++] = base + info->size - (0x00010000 << FLASH_SHIFT); /* -32k */
+ info->start[i++] = base + info->size - (0x00008000 << FLASH_SHIFT); /* -8k */
+ info->start[i++] = base + info->size - (0x00006000 << FLASH_SHIFT); /* -8k */
+ info->start[i] = base + info->size - (0x00004000 << FLASH_SHIFT); /* -16k */
+ }
+ }
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info (flash_info_t *info)
+{
+ int i;
+
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("missing or unknown FLASH type\n");
+ return;
+ }
+
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case FLASH_MAN_AMD: printf ("AMD "); break;
+ case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
+ case FLASH_MAN_STM: printf ("ST "); break;
+ default: printf ("Unknown Vendor "); break;
+ }
+
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+ break;
+ case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+ break;
+ case FLASH_STMW320DB: printf ("M29W320B (32 Mbit, bottom boot sect)\n");
+ break;
+ case FLASH_STMW320DT: printf ("M29W320T (32 Mbit, top boot sector)\n");
+ break;
+ default: printf ("Unknown Chip Type\n");
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i=0; i<info->sector_count; ++i) {
+ if ((i % 5) == 0)
+ printf ("\n ");
+ printf (" %08lX%s",
+ info->start[i],
+ info->protect[i] ? " (RO)" : " "
+ );
+ }
+ printf ("\n");
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+#define AMD_ID_LV160T_MVS (AMD_ID_LV160T & FLASH_DATA_MASK)
+#define AMD_ID_LV160B_MVS (AMD_ID_LV160B & FLASH_DATA_MASK)
+#define AMD_ID_LV320T_MVS (AMD_ID_LV320T & FLASH_DATA_MASK)
+#define AMD_ID_LV320B_MVS (AMD_ID_LV320B & FLASH_DATA_MASK)
+#define STM_ID_W320DT_MVS (STM_ID_29W320DT & FLASH_DATA_MASK)
+#define STM_ID_W320DB_MVS (STM_ID_29W320DB & FLASH_DATA_MASK)
+#define AMD_MANUFACT_MVS (AMD_MANUFACT & FLASH_DATA_MASK)
+#define FUJ_MANUFACT_MVS (FUJ_MANUFACT & FLASH_DATA_MASK)
+#define STM_MANUFACT_MVS (STM_MANUFACT & FLASH_DATA_MASK)
+
+#define AUTOSELECT_ADDR1 0x0555
+#define AUTOSELECT_ADDR2 0x02AA
+#define AUTOSELECT_ADDR3 AUTOSELECT_ADDR1
+
+#define AUTOSELECT_DATA1 (0x00AA00AA & FLASH_DATA_MASK)
+#define AUTOSELECT_DATA2 (0x00550055 & FLASH_DATA_MASK)
+#define AUTOSELECT_DATA3 (0x00900090 & FLASH_DATA_MASK)
+
+#define RESET_BANK_DATA (0x00F000F0 & FLASH_DATA_MASK)
+
+static ulong flash_get_size (vu_long *address, flash_info_t *info)
+{
+ short i;
+#ifdef CONFIG_MVS_16BIT_FLASH
+ ushort value;
+ vu_short *addr = (vu_short *)address;
+#else
+ ulong value;
+ vu_long *addr = (vu_long *)address;
+#endif
+ ulong base = (ulong)address;
+
+ /* Write auto select command: read Manufacturer ID */
+ addr[AUTOSELECT_ADDR1] = AUTOSELECT_DATA1;
+ addr[AUTOSELECT_ADDR2] = AUTOSELECT_DATA2;
+ addr[AUTOSELECT_ADDR3] = AUTOSELECT_DATA3;
+
+ value = addr[0]; /* manufacturer ID */
+ switch (value) {
+ case AMD_MANUFACT_MVS:
+ info->flash_id = FLASH_MAN_AMD;
+ break;
+ case FUJ_MANUFACT_MVS:
+ info->flash_id = FLASH_MAN_FUJ;
+ break;
+ case STM_MANUFACT_MVS:
+ info->flash_id = FLASH_MAN_STM;
+ break;
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ info->sector_count = 0;
+ info->size = 0;
+ return (0); /* no or unknown flash */
+ }
+
+ value = addr[1]; /* device ID */
+ switch (value) {
+ case AMD_ID_LV160T_MVS:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 37;
+ info->size = (0x00200000 << FLASH_SHIFT);
+ break; /* => 2 or 4 MB */
+
+ case AMD_ID_LV160B_MVS:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 37;
+ info->size = (0x00200000 << FLASH_SHIFT);
+ break; /* => 2 or 4 MB */
+
+ case AMD_ID_LV320T_MVS:
+ info->flash_id += FLASH_AM320T;
+ info->sector_count = 71;
+ info->size = (0x00400000 << FLASH_SHIFT);
+ break; /* => 4 or 8 MB */
+
+ case AMD_ID_LV320B_MVS:
+ info->flash_id += FLASH_AM320B;
+ info->sector_count = 71;
+ info->size = (0x00400000 << FLASH_SHIFT);
+ break; /* => 4 or 8MB */
+
+ case STM_ID_W320DT_MVS:
+ info->flash_id += FLASH_STMW320DT;
+ info->sector_count = 67;
+ info->size = (0x00400000 << FLASH_SHIFT);
+ break; /* => 4 or 8 MB */
+
+ case STM_ID_W320DB_MVS:
+ info->flash_id += FLASH_STMW320DB;
+ info->sector_count = 67;
+ info->size = (0x00400000 << FLASH_SHIFT);
+ break; /* => 4 or 8MB */
+
+ default:
+ info->flash_id = FLASH_UNKNOWN;
+ return (0); /* => no or unknown flash */
+
+ }
+
+ /* set up sector start address table */
+ flash_get_offsets (base, info);
+
+ /* check for protected sectors */
+ for (i = 0; i < info->sector_count; i++) {
+ /* read sector protection at sector address, (A7 .. A0) = 0x02 */
+ /* D0 = 1 if protected */
+#ifdef CONFIG_MVS_16BIT_FLASH
+ addr = (vu_short *)(info->start[i]);
+#else
+ addr = (vu_long *)(info->start[i]);
+#endif
+ info->protect[i] = addr[2] & 1;
+ }
+
+ /*
+ * Prevent writes to uninitialized FLASH.
+ */
+ if (info->flash_id != FLASH_UNKNOWN) {
+#ifdef CONFIG_MVS_16BIT_FLASH
+ addr = (vu_short *)info->start[0];
+#else
+ addr = (vu_long *)info->start[0];
+#endif
+ *addr = RESET_BANK_DATA; /* reset bank */
+ }
+
+ return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+#define ERASE_ADDR1 0x0555
+#define ERASE_ADDR2 0x02AA
+#define ERASE_ADDR3 ERASE_ADDR1
+#define ERASE_ADDR4 ERASE_ADDR1
+#define ERASE_ADDR5 ERASE_ADDR2
+
+#define ERASE_DATA1 (0x00AA00AA & FLASH_DATA_MASK)
+#define ERASE_DATA2 (0x00550055 & FLASH_DATA_MASK)
+#define ERASE_DATA3 (0x00800080 & FLASH_DATA_MASK)
+#define ERASE_DATA4 ERASE_DATA1
+#define ERASE_DATA5 ERASE_DATA2
+
+#define ERASE_SECTOR_DATA (0x00300030 & FLASH_DATA_MASK)
+#define ERASE_CHIP_DATA (0x00100010 & FLASH_DATA_MASK)
+#define ERASE_CONFIRM_DATA (0x00800080 & FLASH_DATA_MASK)
+
+int flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+#ifdef CONFIG_MVS_16BIT_FLASH
+ vu_short *addr = (vu_short *)(info->start[0]);
+#else
+ vu_long *addr = (vu_long *)(info->start[0]);
+#endif
+ int flag, prot, sect, l_sect;
+ ulong start, now, last;
+
+ if ((s_first < 0) || (s_first > s_last)) {
+ if (info->flash_id == FLASH_UNKNOWN) {
+ printf ("- missing\n");
+ } else {
+ printf ("- no sectors to erase\n");
+ }
+ return 1;
+ }
+
+ if ((info->flash_id == FLASH_UNKNOWN) ||
+ (info->flash_id > FLASH_AMD_COMP)) {
+ printf ("Can't erase unknown flash type %08lx - aborted\n",
+ info->flash_id);
+ return 1;
+ }
+
+ prot = 0;
+ for (sect=s_first; sect<=s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
+ }
+ }
+
+ if (prot) {
+ printf ("- Warning: %d protected sectors will not be erased!\n",
+ prot);
+ } else {
+ printf ("\n");
+ }
+
+ l_sect = -1;
+
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[ERASE_ADDR1] = ERASE_DATA1;
+ addr[ERASE_ADDR2] = ERASE_DATA2;
+ addr[ERASE_ADDR3] = ERASE_DATA3;
+ addr[ERASE_ADDR4] = ERASE_DATA4;
+ addr[ERASE_ADDR5] = ERASE_DATA5;
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect<=s_last; sect++) {
+ if (info->protect[sect] == 0) { /* not protected */
+#ifdef CONFIG_MVS_16BIT_FLASH
+ addr = (vu_short *)(info->start[sect]);
+#else
+ addr = (vu_long *)(info->start[sect]);
+#endif
+ addr[0] = ERASE_SECTOR_DATA;
+ l_sect = sect;
+ }
+ }
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* wait at least 80us - let's wait 1 ms */
+ udelay (1000);
+
+ /*
+ * We wait for the last triggered sector
+ */
+ if (l_sect < 0)
+ goto DONE;
+
+ start = get_timer (0);
+ last = start;
+#ifdef CONFIG_MVS_16BIT_FLASH
+ addr = (vu_short *)(info->start[l_sect]);
+#else
+ addr = (vu_long *)(info->start[l_sect]);
+#endif
+ while ((addr[0] & ERASE_CONFIRM_DATA) != ERASE_CONFIRM_DATA) {
+ if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+ printf ("Timeout\n");
+ return 1;
+ }
+ /* show that we're waiting */
+ if ((now - last) > 1000) { /* every second */
+ putc ('.');
+ last = now;
+ }
+ }
+
+DONE:
+ /* reset to read mode */
+#ifdef CONFIG_MVS_16BIT_FLASH
+ addr = (vu_short *)info->start[0];
+#else
+ addr = (vu_long *)info->start[0];
+#endif
+ addr[0] = RESET_BANK_DATA; /* reset bank */
+
+ printf (" done\n");
+ return 0;
+}
+
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+#define BUFF_INC 4
+ ulong cp, wp, data;
+ int i, l, rc;
+
+ mvdebug (("+write_buff %p ==> 0x%08lx, count = 0x%08lx\n", src, addr, cnt));
+
+ wp = (addr & ~3); /* get lower word aligned address */
+ /*
+ * handle unaligned start bytes
+ */
+ if ((l = addr - wp) != 0) {
+ mvdebug ((" handle unaligned start bytes (cnt = 0x%08%lx)\n", cnt));
+ data = 0;
+ for (i=0, cp=wp; i<l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+ for (; i<BUFF_INC && cnt>0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt==0 && i<BUFF_INC; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += BUFF_INC;
+ }
+
+ /*
+ * handle (half)word aligned part
+ */
+ mvdebug ((" handle word aligned part (cnt = 0x%08%lx)\n", cnt));
+ while (cnt >= BUFF_INC) {
+ data = 0;
+ for (i=0; i<BUFF_INC; ++i) {
+ data = (data << 8) | *src++;
+ }
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += BUFF_INC;
+ cnt -= BUFF_INC;
+ }
+
+ if (cnt == 0) {
+ return (0);
+ }
+
+ /*
+ * handle unaligned tail bytes
+ */
+ mvdebug ((" handle unaligned tail bytes (cnt = 0x%08%lx)\n", cnt));
+ data = 0;
+ for (i=0, cp=wp; i<BUFF_INC && cnt>0; ++i, ++cp) {
+ data = (data << 8) | *src++;
+ --cnt;
+ }
+ for (; i<BUFF_INC; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *)cp);
+ }
+
+ return (write_word(info, wp, data));
+}
+
+#define WRITE_ADDR1 0x0555
+#define WRITE_ADDR2 0x02AA
+#define WRITE_ADDR3 WRITE_ADDR1
+
+#define WRITE_DATA1 (0x00AA00AA & FLASH_DATA_MASK)
+#define WRITE_DATA2 (0x00550055 & FLASH_DATA_MASK)
+#define WRITE_DATA3 (0x00A000A0 & FLASH_DATA_MASK)
+
+#define WRITE_CONFIRM_DATA ERASE_CONFIRM_DATA
+
+#ifndef CONFIG_MVS_16BIT_FLASH
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ vu_long *addr = (vu_long *)(info->start[0]);
+ ulong start;
+ int flag;
+
+ mvdebug (("+write_word (to 0x%08lx)\n", dest));
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_long *)dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[WRITE_ADDR1] = WRITE_DATA1;
+ addr[WRITE_ADDR2] = WRITE_DATA2;
+ addr[WRITE_ADDR3] = WRITE_DATA3;
+
+ *((vu_long *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ addr = (vu_long *)dest;
+ while ((*addr & WRITE_CONFIRM_DATA) != (data & WRITE_CONFIRM_DATA)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+
+ mvdebug (("-write_word\n"));
+ return (0);
+}
+#else /* CONFIG_MVS_16BIT_FLASH */
+/*-----------------------------------------------------------------------
+ * Write a halfword to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_halfword (flash_info_t *info, ulong dest, ushort data)
+{
+ vu_short *addr = (vu_short *)(info->start[0]);
+ ulong start;
+ int flag;
+
+ mvdebug (("+write_halfword (to 0x%08lx)\n", dest));
+ /* Check if Flash is (sufficiently) erased */
+ if ((*((vu_short *)dest) & data) != data) {
+ return (2);
+ }
+ /* Disable interrupts which might cause a timeout here */
+ flag = disable_interrupts();
+
+ addr[WRITE_ADDR1] = WRITE_DATA1;
+ addr[WRITE_ADDR2] = WRITE_DATA2;
+ addr[WRITE_ADDR3] = WRITE_DATA3;
+
+ *((vu_short *)dest) = data;
+
+ /* re-enable interrupts if necessary */
+ if (flag)
+ enable_interrupts();
+
+ /* data polling for D7 */
+ start = get_timer (0);
+ addr = (vu_short *)dest;
+ while ((*addr & WRITE_CONFIRM_DATA) != (data & WRITE_CONFIRM_DATA)) {
+ if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+ return (1);
+ }
+ }
+ mvdebug (("-write_halfword\n"));
+ return (0);
+}
+
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+ int result = 0;
+
+ if (write_halfword (info, dest, (data & ~FLASH_DATA_MASK) >> 16) == 0)
+ {
+ dest += 2;
+ data = data & FLASH_DATA_MASK;
+ result = write_halfword (info, dest, data);
+ }
+ return result;
+}
+#endif
+/*-----------------------------------------------------------------------
+ */