diff options
257 files changed, 13118 insertions, 1816 deletions
@@ -24,7 +24,7 @@ VERSION = 2013 PATCHLEVEL = 01 SUBLEVEL = -EXTRAVERSION = -rc1 +EXTRAVERSION = -rc2 ifneq "$(SUBLEVEL)" "" U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) else @@ -316,6 +316,7 @@ LIBS-y += arch/powerpc/cpu/mpc8xxx/lib8xxx.o endif LIBS-y += drivers/rtc/librtc.o LIBS-y += drivers/serial/libserial.o +LIBS-y += drivers/sound/libsound.o LIBS-$(CONFIG_GENERIC_LPC_TPM) += drivers/tpm/libtpm.o LIBS-y += drivers/twserial/libtws.o LIBS-y += drivers/usb/eth/libusb_eth.o @@ -815,6 +815,8 @@ The following options need to be configured: CONFIG_CMD_EDITENV edit env variable CONFIG_CMD_EEPROM * EEPROM read/write support CONFIG_CMD_ELF * bootelf, bootvx + CONFIG_CMD_ENV_CALLBACK * display details about env callbacks + CONFIG_CMD_ENV_FLAGS * display details about env flags CONFIG_CMD_EXPORTENV * export the environment CONFIG_CMD_EXT2 * ext2 command support CONFIG_CMD_EXT4 * ext4 command support @@ -824,8 +826,10 @@ The following options need to be configured: CONFIG_CMD_FDOS * Dos diskette Support CONFIG_CMD_FLASH flinfo, erase, protect CONFIG_CMD_FPGA FPGA device initialization support + CONFIG_CMD_GETTIME * Get time since boot CONFIG_CMD_GO * the 'go' command (exec code) CONFIG_CMD_GREPENV * search environment + CONFIG_CMD_HASH * calculate hash / digest CONFIG_CMD_HWFLOW * RTS/CTS hw flow control CONFIG_CMD_I2C * I2C serial bus support CONFIG_CMD_IDE * IDE harddisk support @@ -860,6 +864,7 @@ The following options need to be configured: CONFIG_CMD_PING * send ICMP ECHO_REQUEST to network host CONFIG_CMD_PORTIO * Port I/O + CONFIG_CMD_READ * Read raw data from partition CONFIG_CMD_REGINFO * Register dump CONFIG_CMD_RUN run command in env variable CONFIG_CMD_SAVES * save S record dump @@ -1481,10 +1486,29 @@ CBFS (Coreboot Filesystem) support Normally display is black on white background; define CONFIG_SYS_WHITE_ON_BLACK to get it inverted. + CONFIG_LCD_ALIGNMENT + + Normally the LCD is page-aligned (tyically 4KB). If this is + defined then the LCD will be aligned to this value instead. + For ARM it is sometimes useful to use MMU_SECTION_SIZE + here, since it is cheaper to change data cache settings on + a per-section basis. + + CONFIG_CONSOLE_SCROLL_LINES + + When the console need to be scrolled, this is the number of + lines to scroll by. It defaults to 1. Increasing this makes + the console jump but can help speed up operation when scrolling + is slow. + CONFIG_LCD_BMP_RLE8 Support drawing of RLE8-compressed bitmaps on the LCD. + CONFIG_I2C_EDID + + Enables an 'i2c edid' command which can read EDID + information over I2C from an attached LCD display. - Splash Screen Support: CONFIG_SPLASH_SCREEN @@ -2179,6 +2203,11 @@ CBFS (Coreboot Filesystem) support serial# is unaffected by this, i. e. it remains read-only.] + The same can be accomplished in a more flexible way + for any variable by configuring the type of access + to allow for those variables in the ".flags" variable + or define CONFIG_ENV_FLAGS_LIST_STATIC. + - Protected RAM: CONFIG_PRAM @@ -2409,6 +2438,23 @@ CBFS (Coreboot Filesystem) support A better solution is to properly configure the firewall, but sometimes that is not allowed. +- Hashing support: + CONFIG_CMD_HASH + + This enables a generic 'hash' command which can produce + hashes / digests from a few algorithms (e.g. SHA1, SHA256). + + CONFIG_HASH_VERIFY + + Enable the hash verify command (hash -v). This adds to code + size a little. + + CONFIG_SHA1 - support SHA1 hashing + CONFIG_SHA256 - support SHA256 hashing + + Note: There is also a sha1sum command, which should perhaps + be deprecated in favour of 'hash sha1'. + - Show boot progress: CONFIG_SHOW_BOOT_PROGRESS @@ -2943,9 +2989,6 @@ Configuration Settings: non page size aligned address and this could cause major problems. -- CONFIG_SYS_TFTP_LOADADDR: - Default load address for network file downloads - - CONFIG_SYS_LOADS_BAUD_CHANGE: Enable temporary baudrate change while serial download @@ -3087,6 +3130,49 @@ Configuration Settings: cases. This setting can be used to tune behaviour; see lib/hashtable.c for details. +- CONFIG_ENV_FLAGS_LIST_DEFAULT +- CONFIG_ENV_FLAGS_LIST_STATIC + Enable validation of the values given to enviroment variables when + calling env set. Variables can be restricted to only decimal, + hexadecimal, or boolean. If CONFIG_CMD_NET is also defined, + the variables can also be restricted to IP address or MAC address. + + The format of the list is: + type_attribute = [s|d|x|b|i|m] + access_atribute = [a|r|o|c] + attributes = type_attribute[access_atribute] + entry = variable_name[:attributes] + list = entry[,list] + + The type attributes are: + s - String (default) + d - Decimal + x - Hexadecimal + b - Boolean ([1yYtT|0nNfF]) + i - IP address + m - MAC address + + The access attributes are: + a - Any (default) + r - Read-only + o - Write-once + c - Change-default + + - CONFIG_ENV_FLAGS_LIST_DEFAULT + Define this to a list (string) to define the ".flags" + envirnoment variable in the default or embedded environment. + + - CONFIG_ENV_FLAGS_LIST_STATIC + Define this to a list (string) to define validation that + should be done if an entry is not found in the ".flags" + environment variable. To override a setting in the static + list, simply add an entry for the same variable name to the + ".flags" variable. + +- CONFIG_ENV_ACCESS_IGNORE_FORCE + If defined, don't allow the -f switch to env set override variable + access flags. + The following definitions that deal with the placement and management of environment data (variable area); in general, we support the following configurations: @@ -4188,6 +4274,36 @@ Please note that changes to some configuration parameters may take only effect after the next boot (yes, that's just like Windoze :-). +Callback functions for environment variables: +--------------------------------------------- + +For some environment variables, the behavior of u-boot needs to change +when their values are changed. This functionailty allows functions to +be associated with arbitrary variables. On creation, overwrite, or +deletion, the callback will provide the opportunity for some side +effect to happen or for the change to be rejected. + +The callbacks are named and associated with a function using the +U_BOOT_ENV_CALLBACK macro in your board or driver code. + +These callbacks are associated with variables in one of two ways. The +static list can be added to by defining CONFIG_ENV_CALLBACK_LIST_STATIC +in the board configuration to a string that defines a list of +associations. The list must be in the following format: + + entry = variable_name[:callback_name] + list = entry[,list] + +If the callback name is not specified, then the callback is deleted. +Spaces are also allowed anywhere in the list. + +Callbacks can also be associated by defining the ".callbacks" variable +with the same list format above. Any association in ".callbacks" will +override any association in the static list. You can define +CONFIG_ENV_CALLBACK_LIST_DEFAULT to a list (string) to define the +".callbacks" envirnoment variable in the default or embedded environment. + + Command Line Parsing: ===================== diff --git a/arch/arm/cpu/arm1136/cpu.c b/arch/arm/cpu/arm1136/cpu.c index b98e3d9..32a4c24 100644 --- a/arch/arm/cpu/arm1136/cpu.c +++ b/arch/arm/cpu/arm1136/cpu.c @@ -141,16 +141,6 @@ void flush_cache(unsigned long start, unsigned long size) flush_dcache_range(start, start + size); } -void enable_caches(void) -{ -#ifndef CONFIG_SYS_ICACHE_OFF - icache_enable(); -#endif -#ifndef CONFIG_SYS_DCACHE_OFF - dcache_enable(); -#endif -} - #else /* #ifndef CONFIG_SYS_DCACHE_OFF */ void invalidate_dcache_all(void) { @@ -172,3 +162,15 @@ void flush_cache(unsigned long start, unsigned long size) { } #endif /* #ifndef CONFIG_SYS_DCACHE_OFF */ + +#if !defined(CONFIG_SYS_ICACHE_OFF) || !defined(CONFIG_SYS_DCACHE_OFF) +void enable_caches(void) +{ +#ifndef CONFIG_SYS_ICACHE_OFF + icache_enable(); +#endif +#ifndef CONFIG_SYS_DCACHE_OFF + dcache_enable(); +#endif +} +#endif diff --git a/arch/arm/cpu/arm1176/s3c64xx/Makefile b/arch/arm/cpu/arm1176/s3c64xx/Makefile index 0785b19..266a073 100644 --- a/arch/arm/cpu/arm1176/s3c64xx/Makefile +++ b/arch/arm/cpu/arm1176/s3c64xx/Makefile @@ -31,7 +31,7 @@ LIB = $(obj)lib$(SOC).o SOBJS = reset.o COBJS-$(CONFIG_S3C6400) += cpu_init.o speed.o -COBJS-y += timer.o +COBJS-y += timer.o init.o OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) diff --git a/arch/arm/cpu/arm1176/s3c64xx/init.c b/arch/arm/cpu/arm1176/s3c64xx/init.c new file mode 100644 index 0000000..f113d8e --- /dev/null +++ b/arch/arm/cpu/arm1176/s3c64xx/init.c @@ -0,0 +1,26 @@ +/* + * (C) Copyright 2012 Ashok Kumar Reddy Kourla + * ashokkourla2000@gmail.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include<common.h> + +int arch_cpu_init(void) +{ + icache_enable(); + + return 0; +} diff --git a/arch/arm/cpu/arm926ejs/davinci/reset.c b/arch/arm/cpu/arm926ejs/davinci/reset.c index 968fb03..80f1ce9 100644 --- a/arch/arm/cpu/arm926ejs/davinci/reset.c +++ b/arch/arm/cpu/arm926ejs/davinci/reset.c @@ -16,7 +16,7 @@ void reset_cpu(unsigned long a) { struct davinci_timer *const wdttimer = - (struct davinci_timer *)DAVINCI_TIMER1_BASE; + (struct davinci_timer *)DAVINCI_WDOG_BASE; writel(0x08, &wdttimer->tgcr); writel(readl(&wdttimer->tgcr) | 0x03, &wdttimer->tgcr); writel(0, &wdttimer->tim12); diff --git a/arch/arm/cpu/arm926ejs/mxs/clock.c b/arch/arm/cpu/arm926ejs/mxs/clock.c index bfea6ab..4ff19c3 100644 --- a/arch/arm/cpu/arm926ejs/mxs/clock.c +++ b/arch/arm/cpu/arm926ejs/mxs/clock.c @@ -333,6 +333,8 @@ uint32_t mxc_get_clock(enum mxc_clock clk) return mx28_get_sspclk(MXC_SSPCLK2); case MXC_SSP3_CLK: return mx28_get_sspclk(MXC_SSPCLK3); + case MXC_XTAL_CLK: + return XTAL_FREQ_KHZ * 1000; } return 0; diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile index 74875b3..70c443e 100644 --- a/arch/arm/cpu/armv7/am33xx/Makefile +++ b/arch/arm/cpu/armv7/am33xx/Makefile @@ -18,10 +18,12 @@ LIB = $(obj)lib$(SOC).o COBJS += clock.o COBJS += sys_info.o +COBJS += mem.o COBJS += ddr.o COBJS += emif4.o COBJS += board.o COBJS += mux.o +COBJS-$(CONFIG_NAND_OMAP_GPMC) += elm.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS)) diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c index da5bc73..ab31326 100644 --- a/arch/arm/cpu/armv7/am33xx/board.c +++ b/arch/arm/cpu/armv7/am33xx/board.c @@ -25,6 +25,7 @@ #include <asm/arch/ddr_defs.h> #include <asm/arch/clock.h> #include <asm/arch/gpio.h> +#include <asm/arch/mem.h> #include <asm/arch/mmc_host_def.h> #include <asm/arch/sys_proto.h> #include <asm/io.h> diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c index 0b4cb4e..d7d98d1 100644 --- a/arch/arm/cpu/armv7/am33xx/clock.c +++ b/arch/arm/cpu/armv7/am33xx/clock.c @@ -151,6 +151,16 @@ static void enable_per_clocks(void) ; #endif /* CONFIG_SERIAL6 */ + /* GPMC */ + writel(PRCM_MOD_EN, &cmper->gpmcclkctrl); + while (readl(&cmper->gpmcclkctrl) != PRCM_MOD_EN) + ; + + /* ELM */ + writel(PRCM_MOD_EN, &cmper->elmclkctrl); + while (readl(&cmper->elmclkctrl) != PRCM_MOD_EN) + ; + /* MMC0*/ writel(PRCM_MOD_EN, &cmper->mmc0clkctrl); while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN) diff --git a/arch/arm/cpu/armv7/am33xx/elm.c b/arch/arm/cpu/armv7/am33xx/elm.c new file mode 100644 index 0000000..9eed23d --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/elm.c @@ -0,0 +1,212 @@ +/* + * (C) Copyright 2010-2011 Texas Instruments, <www.ti.com> + * Mansoor Ahamed <mansoor.ahamed@ti.com> + * + * BCH Error Location Module (ELM) support. + * + * NOTE: + * 1. Supports only continuous mode. Dont see need for page mode in uboot + * 2. Supports only syndrome polynomial 0. i.e. poly local variable is + * always set to ELM_DEFAULT_POLY. Dont see need for other polynomial + * sets in uboot + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/errno.h> +#include <asm/arch/cpu.h> +#include <asm/arch/omap_gpmc.h> +#include <asm/arch/elm.h> + +#define ELM_DEFAULT_POLY (0) + +struct elm *elm_cfg; + +/** + * elm_load_syndromes - Load BCH syndromes based on nibble selection + * @syndrome: BCH syndrome + * @nibbles: + * @poly: Syndrome Polynomial set to use + * + * Load BCH syndromes based on nibble selection + */ +static void elm_load_syndromes(u8 *syndrome, u32 nibbles, u8 poly) +{ + u32 *ptr; + u32 val; + + /* reg 0 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[0]; + val = syndrome[0] | (syndrome[1] << 8) | (syndrome[2] << 16) | + (syndrome[3] << 24); + writel(val, ptr); + /* reg 1 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[1]; + val = syndrome[4] | (syndrome[5] << 8) | (syndrome[6] << 16) | + (syndrome[7] << 24); + writel(val, ptr); + + /* BCH 8-bit with 26 nibbles (4*8=32) */ + if (nibbles > 13) { + /* reg 2 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[2]; + val = syndrome[8] | (syndrome[9] << 8) | (syndrome[10] << 16) | + (syndrome[11] << 24); + writel(val, ptr); + /* reg 3 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[3]; + val = syndrome[12] | (syndrome[13] << 8) | + (syndrome[14] << 16) | (syndrome[15] << 24); + writel(val, ptr); + } + + /* BCH 16-bit with 52 nibbles (7*8=56) */ + if (nibbles > 26) { + /* reg 4 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[4]; + val = syndrome[16] | (syndrome[17] << 8) | + (syndrome[18] << 16) | (syndrome[19] << 24); + writel(val, ptr); + + /* reg 5 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[5]; + val = syndrome[20] | (syndrome[21] << 8) | + (syndrome[22] << 16) | (syndrome[23] << 24); + writel(val, ptr); + + /* reg 6 */ + ptr = &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]; + val = syndrome[24] | (syndrome[25] << 8) | + (syndrome[26] << 16) | (syndrome[27] << 24); + writel(val, ptr); + } +} + +/** + * elm_check_errors - Check for BCH errors and return error locations + * @syndrome: BCH syndrome + * @nibbles: + * @error_count: Returns number of errrors in the syndrome + * @error_locations: Returns error locations (in decimal) in this array + * + * Check the provided syndrome for BCH errors and return error count + * and locations in the array passed. Returns -1 if error is not correctable, + * else returns 0 + */ +int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count, + u32 *error_locations) +{ + u8 poly = ELM_DEFAULT_POLY; + s8 i; + u32 location_status; + + elm_load_syndromes(syndrome, nibbles, poly); + + /* start processing */ + writel((readl(&elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]) + | ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID), + &elm_cfg->syndrome_fragments[poly].syndrome_fragment_x[6]); + + /* wait for processing to complete */ + while ((readl(&elm_cfg->irqstatus) & (0x1 << poly)) != 0x1) + ; + /* clear status */ + writel((readl(&elm_cfg->irqstatus) | (0x1 << poly)), + &elm_cfg->irqstatus); + + /* check if correctable */ + location_status = readl(&elm_cfg->error_location[poly].location_status); + if (!(location_status & ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK)) + return -1; + + /* get error count */ + *error_count = readl(&elm_cfg->error_location[poly].location_status) & + ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK; + + for (i = 0; i < *error_count; i++) { + error_locations[i] = + readl(&elm_cfg->error_location[poly].error_location_x[i]); + } + + return 0; +} + + +/** + * elm_config - Configure ELM module + * @level: 4 / 8 / 16 bit BCH + * + * Configure ELM module based on BCH level. + * Set mode as continuous mode. + * Currently we are using only syndrome 0 and syndromes 1 to 6 are not used. + * Also, the mode is set only for syndrome 0 + */ +int elm_config(enum bch_level level) +{ + u32 val; + u8 poly = ELM_DEFAULT_POLY; + u32 buffer_size = 0x7FF; + + /* config size and level */ + val = (u32)(level) & ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK; + val |= ((buffer_size << ELM_LOCATION_CONFIG_ECC_SIZE_POS) & + ELM_LOCATION_CONFIG_ECC_SIZE_MASK); + writel(val, &elm_cfg->location_config); + + /* config continous mode */ + /* enable interrupt generation for syndrome polynomial set */ + writel((readl(&elm_cfg->irqenable) | (0x1 << poly)), + &elm_cfg->irqenable); + /* set continuous mode for the syndrome polynomial set */ + writel((readl(&elm_cfg->page_ctrl) & ~(0x1 << poly)), + &elm_cfg->page_ctrl); + + return 0; +} + +/** + * elm_reset - Do a soft reset of ELM + * + * Perform a soft reset of ELM and return after reset is done. + */ +void elm_reset(void) +{ + /* initiate reset */ + writel((readl(&elm_cfg->sysconfig) | ELM_SYSCONFIG_SOFTRESET), + &elm_cfg->sysconfig); + + /* wait for reset complete and normal operation */ + while ((readl(&elm_cfg->sysstatus) & ELM_SYSSTATUS_RESETDONE) != + ELM_SYSSTATUS_RESETDONE) + ; +} + +/** + * elm_init - Initialize ELM module + * + * Initialize ELM support. Currently it does only base address init + * and ELM reset. + */ +void elm_init(void) +{ + elm_cfg = (struct elm *)ELM_BASE; + elm_reset(); +} diff --git a/arch/arm/cpu/armv7/am33xx/mem.c b/arch/arm/cpu/armv7/am33xx/mem.c new file mode 100644 index 0000000..b8f54ab --- /dev/null +++ b/arch/arm/cpu/armv7/am33xx/mem.c @@ -0,0 +1,101 @@ +/* + * (C) Copyright 2010 + * Texas Instruments, <www.ti.com> + * + * Author : + * Mansoor Ahamed <mansoor.ahamed@ti.com> + * + * Initial Code from: + * Manikandan Pillai <mani.pillai@ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * Syed Mohammed Khasim <khasim@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <command.h> + +struct gpmc *gpmc_cfg; + +#if defined(CONFIG_CMD_NAND) +static const u32 gpmc_m_nand[GPMC_MAX_REG] = { + M_NAND_GPMC_CONFIG1, + M_NAND_GPMC_CONFIG2, + M_NAND_GPMC_CONFIG3, + M_NAND_GPMC_CONFIG4, + M_NAND_GPMC_CONFIG5, + M_NAND_GPMC_CONFIG6, 0 +}; +#endif + + +void enable_gpmc_cs_config(const u32 *gpmc_config, struct gpmc_cs *cs, u32 base, + u32 size) +{ + writel(0, &cs->config7); + sdelay(1000); + /* Delay for settling */ + writel(gpmc_config[0], &cs->config1); + writel(gpmc_config[1], &cs->config2); + writel(gpmc_config[2], &cs->config3); + writel(gpmc_config[3], &cs->config4); + writel(gpmc_config[4], &cs->config5); + writel(gpmc_config[5], &cs->config6); + /* Enable the config */ + writel((((size & 0xF) << 8) | ((base >> 24) & 0x3F) | + (1 << 6)), &cs->config7); + sdelay(2000); +} + +/***************************************************** + * gpmc_init(): init gpmc bus + * Init GPMC for x16, MuxMode (SDRAM in x32). + * This code can only be executed from SRAM or SDRAM. + *****************************************************/ +void gpmc_init(void) +{ + /* putting a blanket check on GPMC based on ZeBu for now */ + gpmc_cfg = (struct gpmc *)GPMC_BASE; + +#ifdef CONFIG_CMD_NAND + const u32 *gpmc_config = NULL; + u32 base = 0; + u32 size = 0; +#endif + /* global settings */ + writel(0x00000008, &gpmc_cfg->sysconfig); + writel(0x00000100, &gpmc_cfg->irqstatus); + writel(0x00000200, &gpmc_cfg->irqenable); + writel(0x00000012, &gpmc_cfg->config); + /* + * Disable the GPMC0 config set by ROM code + */ + writel(0, &gpmc_cfg->cs[0].config7); + sdelay(1000); + +#ifdef CONFIG_CMD_NAND + gpmc_config = gpmc_m_nand; + + base = PISMO1_NAND_BASE; + size = PISMO1_NAND_SIZE; + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[0], base, size); +#endif +} diff --git a/arch/arm/cpu/armv7/cache_v7.c b/arch/arm/cpu/armv7/cache_v7.c index 1b4e808..5f6d039 100644 --- a/arch/arm/cpu/armv7/cache_v7.c +++ b/arch/arm/cpu/armv7/cache_v7.c @@ -297,6 +297,12 @@ void arm_init_before_mmu(void) v7_inval_tlb(); } +void mmu_page_table_flush(unsigned long start, unsigned long stop) +{ + flush_dcache_range(start, stop); + v7_inval_tlb(); +} + /* * Flush range from all levels of d-cache/unified-cache used: * Affects the range [start, start + size - 1] @@ -329,6 +335,11 @@ void arm_init_before_mmu(void) void flush_cache(unsigned long start, unsigned long size) { } + +void mmu_page_table_flush(unsigned long start, unsigned long stop) +{ +} + #endif /* #ifndef CONFIG_SYS_DCACHE_OFF */ #ifndef CONFIG_SYS_ICACHE_OFF diff --git a/arch/arm/cpu/armv7/exynos/clock.c b/arch/arm/cpu/armv7/exynos/clock.c index 4f3b451..7459979 100644 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@ -25,42 +25,32 @@ #include <asm/io.h> #include <asm/arch/clock.h> #include <asm/arch/clk.h> - -/* exynos4: return pll clock frequency */ -static unsigned long exynos4_get_pll_clk(int pllreg) +#include <asm/arch/periph.h> + +/* Epll Clock division values to achive different frequency output */ +static struct set_epll_con_val exynos5_epll_div[] = { + { 192000000, 0, 48, 3, 1, 0 }, + { 180000000, 0, 45, 3, 1, 0 }, + { 73728000, 1, 73, 3, 3, 47710 }, + { 67737600, 1, 90, 4, 3, 20762 }, + { 49152000, 0, 49, 3, 3, 9961 }, + { 45158400, 0, 45, 3, 3, 10381 }, + { 180633600, 0, 45, 3, 1, 10381 } +}; + +/* exynos: return pll clock frequency */ +static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k) { - struct exynos4_clock *clk = - (struct exynos4_clock *)samsung_get_base_clock(); - unsigned long r, m, p, s, k = 0, mask, fout; + unsigned long m, p, s = 0, mask, fout; unsigned int freq; - - switch (pllreg) { - case APLL: - r = readl(&clk->apll_con0); - break; - case MPLL: - r = readl(&clk->mpll_con0); - break; - case EPLL: - r = readl(&clk->epll_con0); - k = readl(&clk->epll_con1); - break; - case VPLL: - r = readl(&clk->vpll_con0); - k = readl(&clk->vpll_con1); - break; - default: - printf("Unsupported PLL (%d)\n", pllreg); - return 0; - } - /* * APLL_CON: MIDV [25:16] * MPLL_CON: MIDV [25:16] * EPLL_CON: MIDV [24:16] * VPLL_CON: MIDV [24:16] + * BPLL_CON: MIDV [25:16]: Exynos5 */ - if (pllreg == APLL || pllreg == MPLL) + if (pllreg == APLL || pllreg == MPLL || pllreg == BPLL) mask = 0x3ff; else mask = 0x1ff; @@ -92,13 +82,43 @@ static unsigned long exynos4_get_pll_clk(int pllreg) return fout; } +/* exynos4: return pll clock frequency */ +static unsigned long exynos4_get_pll_clk(int pllreg) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long r, k = 0; + + switch (pllreg) { + case APLL: + r = readl(&clk->apll_con0); + break; + case MPLL: + r = readl(&clk->mpll_con0); + break; + case EPLL: + r = readl(&clk->epll_con0); + k = readl(&clk->epll_con1); + break; + case VPLL: + r = readl(&clk->vpll_con0); + k = readl(&clk->vpll_con1); + break; + default: + printf("Unsupported PLL (%d)\n", pllreg); + return 0; + } + + return exynos_get_pll_clk(pllreg, r, k); +} + /* exynos5: return pll clock frequency */ static unsigned long exynos5_get_pll_clk(int pllreg) { struct exynos5_clock *clk = (struct exynos5_clock *)samsung_get_base_clock(); - unsigned long r, m, p, s, k = 0, mask, fout; - unsigned int freq, pll_div2_sel, fout_sel; + unsigned long r, k = 0, fout; + unsigned int pll_div2_sel, fout_sel; switch (pllreg) { case APLL: @@ -123,41 +143,7 @@ static unsigned long exynos5_get_pll_clk(int pllreg) return 0; } - /* - * APLL_CON: MIDV [25:16] - * MPLL_CON: MIDV [25:16] - * EPLL_CON: MIDV [24:16] - * VPLL_CON: MIDV [24:16] - * BPLL_CON: MIDV [25:16] - */ - if (pllreg == APLL || pllreg == MPLL || pllreg == BPLL) - mask = 0x3ff; - else - mask = 0x1ff; - - m = (r >> 16) & mask; - - /* PDIV [13:8] */ - p = (r >> 8) & 0x3f; - /* SDIV [2:0] */ - s = r & 0x7; - - freq = CONFIG_SYS_CLK_FREQ; - - if (pllreg == EPLL) { - k = k & 0xffff; - /* FOUT = (MDIV + K / 65536) * FIN / (PDIV * 2^SDIV) */ - fout = (m + k / 65536) * (freq / (p * (1 << s))); - } else if (pllreg == VPLL) { - k = k & 0xfff; - /* FOUT = (MDIV + K / 1024) * FIN / (PDIV * 2^SDIV) */ - fout = (m + k / 1024) * (freq / (p * (1 << s))); - } else { - if (s < 1) - s = 1; - /* FOUT = MDIV * FIN / (PDIV * 2^(SDIV - 1)) */ - fout = m * (freq / (p * (1 << (s - 1)))); - } + fout = exynos_get_pll_clk(pllreg, r, k); /* According to the user manual, in EVT1 MPLL and BPLL always gives * 1.6GHz clock, so divide by 2 to get 800MHz MPLL clock.*/ @@ -732,6 +718,224 @@ static unsigned long exynos5_get_i2c_clk(void) return aclk_66; } +int exynos5_set_epll_clk(unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + unsigned int lockcnt; + unsigned int start; + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + epll_con = readl(&clk->epll_con0); + epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK << + EPLL_CON0_LOCK_DET_EN_SHIFT) | + EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT | + EPLL_CON0_PDIV_MASK << EPLL_CON0_PDIV_SHIFT | + EPLL_CON0_SDIV_MASK << EPLL_CON0_SDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(exynos5_epll_div); i++) { + if (exynos5_epll_div[i].freq_out == rate) + break; + } + + if (i == ARRAY_SIZE(exynos5_epll_div)) + return -1; + + epll_con_k = exynos5_epll_div[i].k_dsm << 0; + epll_con |= exynos5_epll_div[i].en_lock_det << + EPLL_CON0_LOCK_DET_EN_SHIFT; + epll_con |= exynos5_epll_div[i].m_div << EPLL_CON0_MDIV_SHIFT; + epll_con |= exynos5_epll_div[i].p_div << EPLL_CON0_PDIV_SHIFT; + epll_con |= exynos5_epll_div[i].s_div << EPLL_CON0_SDIV_SHIFT; + + /* + * Required period ( in cycles) to genarate a stable clock output. + * The maximum clock time can be up to 3000 * PDIV cycles of PLLs + * frequency input (as per spec) + */ + lockcnt = 3000 * exynos5_epll_div[i].p_div; + + writel(lockcnt, &clk->epll_lock); + writel(epll_con, &clk->epll_con0); + writel(epll_con_k, &clk->epll_con1); + + start = get_timer(0); + + while (!(readl(&clk->epll_con0) & + (0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) { + if (get_timer(start) > TIMEOUT_EPLL_LOCK) { + debug("%s: Timeout waiting for EPLL lock\n", __func__); + return -1; + } + } + return 0; +} + +void exynos5_set_i2s_clk_source(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK, + (CLK_SRC_SCLK_EPLL)); +} + +int exynos5_set_i2s_clk_prescaler(unsigned int src_frq, + unsigned int dst_frq) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned int div; + + if ((dst_frq == 0) || (src_frq == 0)) { + debug("%s: Invalid requency input for prescaler\n", __func__); + debug("src frq = %d des frq = %d ", src_frq, dst_frq); + return -1; + } + + div = (src_frq / dst_frq); + if (div > AUDIO_1_RATIO_MASK) { + debug("%s: Frequency ratio is out of range\n", __func__); + debug("src frq = %d des frq = %d ", src_frq, dst_frq); + return -1; + } + clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK, + (div & AUDIO_1_RATIO_MASK)); + return 0; +} + +/** + * Linearly searches for the most accurate main and fine stage clock scalars + * (divisors) for a specified target frequency and scalar bit sizes by checking + * all multiples of main_scalar_bits values. Will always return scalars up to or + * slower than target. + * + * @param main_scalar_bits Number of main scalar bits, must be > 0 and < 32 + * @param fine_scalar_bits Number of fine scalar bits, must be > 0 and < 32 + * @param input_freq Clock frequency to be scaled in Hz + * @param target_freq Desired clock frequency in Hz + * @param best_fine_scalar Pointer to store the fine stage divisor + * + * @return best_main_scalar Main scalar for desired frequency or -1 if none + * found + */ +static int clock_calc_best_scalar(unsigned int main_scaler_bits, + unsigned int fine_scalar_bits, unsigned int input_rate, + unsigned int target_rate, unsigned int *best_fine_scalar) +{ + int i; + int best_main_scalar = -1; + unsigned int best_error = target_rate; + const unsigned int cap = (1 << fine_scalar_bits) - 1; + const unsigned int loops = 1 << main_scaler_bits; + + debug("Input Rate is %u, Target is %u, Cap is %u\n", input_rate, + target_rate, cap); + + assert(best_fine_scalar != NULL); + assert(main_scaler_bits <= fine_scalar_bits); + + *best_fine_scalar = 1; + + if (input_rate == 0 || target_rate == 0) + return -1; + + if (target_rate >= input_rate) + return 1; + + for (i = 1; i <= loops; i++) { + const unsigned int effective_div = max(min(input_rate / i / + target_rate, cap), 1); + const unsigned int effective_rate = input_rate / i / + effective_div; + const int error = target_rate - effective_rate; + + debug("%d|effdiv:%u, effrate:%u, error:%d\n", i, effective_div, + effective_rate, error); + + if (error >= 0 && error <= best_error) { + best_error = error; + best_main_scalar = i; + *best_fine_scalar = effective_div; + } + } + + return best_main_scalar; +} + +static int exynos5_set_spi_clk(enum periph_id periph_id, + unsigned int rate) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + int main; + unsigned int fine; + unsigned shift, pre_shift; + unsigned mask = 0xff; + u32 *reg; + + main = clock_calc_best_scalar(4, 8, 400000000, rate, &fine); + if (main < 0) { + debug("%s: Cannot set clock rate for periph %d", + __func__, periph_id); + return -1; + } + main = main - 1; + fine = fine - 1; + + switch (periph_id) { + case PERIPH_ID_SPI0: + reg = &clk->div_peric1; + shift = 0; + pre_shift = 8; + break; + case PERIPH_ID_SPI1: + reg = &clk->div_peric1; + shift = 16; + pre_shift = 24; + break; + case PERIPH_ID_SPI2: + reg = &clk->div_peric2; + shift = 0; + pre_shift = 8; + break; + case PERIPH_ID_SPI3: + reg = &clk->sclk_div_isp; + shift = 0; + pre_shift = 4; + break; + case PERIPH_ID_SPI4: + reg = &clk->sclk_div_isp; + shift = 12; + pre_shift = 16; + break; + default: + debug("%s: Unsupported peripheral ID %d\n", __func__, + periph_id); + return -1; + } + clrsetbits_le32(reg, mask << shift, (main & mask) << shift); + clrsetbits_le32(reg, mask << pre_shift, (fine & mask) << pre_shift); + + return 0; +} + +static unsigned long exynos4_get_i2c_clk(void) +{ + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long sclk, aclk_100; + unsigned int ratio; + + sclk = get_pll_clk(APLL); + + ratio = (readl(&clk->div_top)) >> 4; + ratio &= 0xf; + aclk_100 = sclk / (ratio + 1); + return aclk_100; +} + unsigned long get_pll_clk(int pllreg) { if (cpu_is_exynos5()) @@ -752,6 +956,8 @@ unsigned long get_i2c_clk(void) { if (cpu_is_exynos5()) { return exynos5_get_i2c_clk(); + } else if (cpu_is_exynos4()) { + return exynos4_get_i2c_clk(); } else { debug("I2C clock is not set for this CPU\n"); return 0; @@ -803,3 +1009,34 @@ void set_mipi_clk(void) if (cpu_is_exynos4()) exynos4_set_mipi_clk(); } + +int set_spi_clk(int periph_id, unsigned int rate) +{ + if (cpu_is_exynos5()) + return exynos5_set_spi_clk(periph_id, rate); + else + return 0; +} + +int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq) +{ + + if (cpu_is_exynos5()) + return exynos5_set_i2s_clk_prescaler(src_frq, dst_frq); + else + return 0; +} + +void set_i2s_clk_source(void) +{ + if (cpu_is_exynos5()) + exynos5_set_i2s_clk_source(); +} + +int set_epll_clk(unsigned long rate) +{ + if (cpu_is_exynos5()) + return exynos5_set_epll_clk(rate); + else + return 0; +} diff --git a/arch/arm/cpu/armv7/exynos/pinmux.c b/arch/arm/cpu/armv7/exynos/pinmux.c index 7776add..20a4b84 100644 --- a/arch/arm/cpu/armv7/exynos/pinmux.c +++ b/arch/arm/cpu/armv7/exynos/pinmux.c @@ -112,6 +112,7 @@ static int exynos5_mmc_config(int peripheral, int flags) s5p_gpio_set_pull(bank, i, GPIO_PULL_UP); s5p_gpio_set_drv(bank, i, GPIO_DRV_4X); } + return 0; } @@ -230,6 +231,59 @@ static void exynos5_i2c_config(int peripheral, int flags) } } +static void exynos5_i2s_config(int peripheral) +{ + int i; + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + + for (i = 0; i < 5; i++) + s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02)); +} + +void exynos5_spi_config(int peripheral) +{ + int cfg = 0, pin = 0, i; + struct s5p_gpio_bank *bank = NULL; + struct exynos5_gpio_part1 *gpio1 = + (struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1(); + struct exynos5_gpio_part2 *gpio2 = + (struct exynos5_gpio_part2 *) samsung_get_base_gpio_part2(); + + switch (peripheral) { + case PERIPH_ID_SPI0: + bank = &gpio1->a2; + cfg = GPIO_FUNC(0x2); + pin = 0; + break; + case PERIPH_ID_SPI1: + bank = &gpio1->a2; + cfg = GPIO_FUNC(0x2); + pin = 4; + break; + case PERIPH_ID_SPI2: + bank = &gpio1->b1; + cfg = GPIO_FUNC(0x5); + pin = 1; + break; + case PERIPH_ID_SPI3: + bank = &gpio2->f1; + cfg = GPIO_FUNC(0x2); + pin = 0; + break; + case PERIPH_ID_SPI4: + for (i = 0; i < 2; i++) { + s5p_gpio_cfg_pin(&gpio2->f0, i + 2, GPIO_FUNC(0x4)); + s5p_gpio_cfg_pin(&gpio2->e0, i + 4, GPIO_FUNC(0x4)); + } + break; + } + if (peripheral != PERIPH_ID_SPI4) { + for (i = pin; i < pin + 4; i++) + s5p_gpio_cfg_pin(bank, i, cfg); + } +} + static int exynos5_pinmux_config(int peripheral, int flags) { switch (peripheral) { @@ -257,6 +311,78 @@ static int exynos5_pinmux_config(int peripheral, int flags) case PERIPH_ID_I2C7: exynos5_i2c_config(peripheral, flags); break; + case PERIPH_ID_I2S1: + exynos5_i2s_config(peripheral); + break; + case PERIPH_ID_SPI0: + case PERIPH_ID_SPI1: + case PERIPH_ID_SPI2: + case PERIPH_ID_SPI3: + case PERIPH_ID_SPI4: + exynos5_spi_config(peripheral); + break; + default: + debug("%s: invalid peripheral %d", __func__, peripheral); + return -1; + } + + return 0; +} + +static void exynos4_i2c_config(int peripheral, int flags) +{ + struct exynos4_gpio_part1 *gpio1 = + (struct exynos4_gpio_part1 *) samsung_get_base_gpio_part1(); + + switch (peripheral) { + case PERIPH_ID_I2C0: + s5p_gpio_cfg_pin(&gpio1->d1, 0, GPIO_FUNC(0x2)); + s5p_gpio_cfg_pin(&gpio1->d1, 1, GPIO_FUNC(0x2)); + break; + case PERIPH_ID_I2C1: + s5p_gpio_cfg_pin(&gpio1->d1, 2, GPIO_FUNC(0x2)); + s5p_gpio_cfg_pin(&gpio1->d1, 3, GPIO_FUNC(0x2)); + break; + case PERIPH_ID_I2C2: + s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C3: + s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C4: + s5p_gpio_cfg_pin(&gpio1->b, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->b, 3, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C5: + s5p_gpio_cfg_pin(&gpio1->b, 6, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->b, 7, GPIO_FUNC(0x3)); + break; + case PERIPH_ID_I2C6: + s5p_gpio_cfg_pin(&gpio1->c1, 3, GPIO_FUNC(0x4)); + s5p_gpio_cfg_pin(&gpio1->c1, 4, GPIO_FUNC(0x4)); + break; + case PERIPH_ID_I2C7: + s5p_gpio_cfg_pin(&gpio1->d0, 2, GPIO_FUNC(0x3)); + s5p_gpio_cfg_pin(&gpio1->d0, 3, GPIO_FUNC(0x3)); + break; + } +} + +static int exynos4_pinmux_config(int peripheral, int flags) +{ + switch (peripheral) { + case PERIPH_ID_I2C0: + case PERIPH_ID_I2C1: + case PERIPH_ID_I2C2: + case PERIPH_ID_I2C3: + case PERIPH_ID_I2C4: + case PERIPH_ID_I2C5: + case PERIPH_ID_I2C6: + case PERIPH_ID_I2C7: + exynos4_i2c_config(peripheral, flags); + break; default: debug("%s: invalid peripheral %d", __func__, peripheral); return -1; @@ -269,6 +395,8 @@ int exynos_pinmux_config(int peripheral, int flags) { if (cpu_is_exynos5()) return exynos5_pinmux_config(peripheral, flags); + else if (cpu_is_exynos4()) + return exynos4_pinmux_config(peripheral, flags); else { debug("pinmux functionality not supported\n"); return -1; diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile index 1f2fa02..0efc80d 100644 --- a/arch/arm/cpu/armv7/omap-common/Makefile +++ b/arch/arm/cpu/armv7/omap-common/Makefile @@ -25,9 +25,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)libomap-common.o -SOBJS := reset.o - -COBJS := timer.o +COBJS := reset.o +COBJS += timer.o COBJS += utils.o ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),) diff --git a/arch/arm/cpu/armv7/omap-common/boot-common.c b/arch/arm/cpu/armv7/omap-common/boot-common.c index 0f19141..2b584e0 100644 --- a/arch/arm/cpu/armv7/omap-common/boot-common.c +++ b/arch/arm/cpu/armv7/omap-common/boot-common.c @@ -21,6 +21,7 @@ #include <asm/omap_common.h> #include <asm/arch/omap.h> #include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> /* * This is used to verify if the configuration header diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c index 30dcf1b..88253cf 100644 --- a/arch/arm/cpu/armv7/omap-common/emif-common.c +++ b/arch/arm/cpu/armv7/omap-common/emif-common.c @@ -33,6 +33,8 @@ #include <asm/utils.h> #include <linux/compiler.h> +static int emif1_enabled = -1, emif2_enabled = -1; + void set_lpmode_selfrefresh(u32 base) { struct emif_reg_struct *emif = (struct emif_reg_struct *)base; @@ -1109,6 +1111,7 @@ void emif_post_init_config(u32 base) void dmm_init(u32 base) { const struct dmm_lisa_map_regs *lisa_map_regs; + u32 i, section, valid; #ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS emif_get_dmm_regs(&lisa_map_regs); @@ -1216,6 +1219,29 @@ void dmm_init(u32 base) writel(lisa_map_regs->dmm_lisa_map_0, &hw_lisa_map_regs->dmm_lisa_map_0); } + + /* + * EMIF should be configured only when + * memory is mapped on it. Using emif1_enabled + * and emif2_enabled variables for this. + */ + emif1_enabled = 0; + emif2_enabled = 0; + for (i = 0; i < 4; i++) { + section = __raw_readl(DMM_BASE + i*4); + valid = (section & EMIF_SDRC_MAP_MASK) >> + (EMIF_SDRC_MAP_SHIFT); + if (valid == 3) { + emif1_enabled = 1; + emif2_enabled = 1; + break; + } else if (valid == 1) { + emif1_enabled = 1; + } else if (valid == 2) { + emif2_enabled = 1; + } + } + } /* @@ -1255,15 +1281,20 @@ void sdram_init(void) writel(CM_DLL_CTRL_NO_OVERRIDE, &prcm->cm_dll_ctrl); } - do_sdram_init(EMIF1_BASE); - do_sdram_init(EMIF2_BASE); - if (!in_sdram) dmm_init(DMM_BASE); + if (emif1_enabled) + do_sdram_init(EMIF1_BASE); + + if (emif2_enabled) + do_sdram_init(EMIF2_BASE); + if (!(in_sdram || warm_reset())) { - emif_post_init_config(EMIF1_BASE); - emif_post_init_config(EMIF2_BASE); + if (emif1_enabled) + emif_post_init_config(EMIF1_BASE); + if (emif2_enabled) + emif_post_init_config(EMIF2_BASE); } /* for the shadow registers to take effect */ diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c index f3cd81a..89c587e 100644 --- a/arch/arm/cpu/armv7/omap3/board.c +++ b/arch/arm/cpu/armv7/omap3/board.c @@ -478,7 +478,7 @@ void omap3_outer_cache_disable(void) */ omap3_update_aux_cr(0, 0x2); } -#endif +#endif /* !CONFIG_SYS_L2CACHE_OFF */ #ifndef CONFIG_SYS_DCACHE_OFF void enable_caches(void) @@ -486,4 +486,4 @@ void enable_caches(void) /* Enable D-cache. I-cache is already enabled in start.S */ dcache_enable(); } -#endif +#endif /* !CONFIG_SYS_DCACHE_OFF */ diff --git a/arch/arm/cpu/armv7/omap3/mem.c b/arch/arm/cpu/armv7/omap3/mem.c index 2fe5ac7..d04a5a1 100644 --- a/arch/arm/cpu/armv7/omap3/mem.c +++ b/arch/arm/cpu/armv7/omap3/mem.c @@ -42,14 +42,7 @@ static const u32 gpmc_m_nand[GPMC_MAX_REG] = { M_NAND_GPMC_CONFIG5, M_NAND_GPMC_CONFIG6, 0 }; - -#if defined(CONFIG_ENV_IS_IN_NAND) -#define GPMC_CS 0 -#else -#define GPMC_CS 1 -#endif - -#endif +#endif /* CONFIG_CMD_NAND */ #if defined(CONFIG_CMD_ONENAND) static const u32 gpmc_onenand[GPMC_MAX_REG] = { @@ -60,14 +53,7 @@ static const u32 gpmc_onenand[GPMC_MAX_REG] = { ONENAND_GPMC_CONFIG5, ONENAND_GPMC_CONFIG6, 0 }; - -#if defined(CONFIG_ENV_IS_IN_ONENAND) -#define GPMC_CS 0 -#else -#define GPMC_CS 1 -#endif - -#endif +#endif /* CONFIG_CMD_ONENAND */ /******************************************************** * mem_ok() - test used to see if timings are correct diff --git a/arch/arm/cpu/armv7/omap3/sdrc.c b/arch/arm/cpu/armv7/omap3/sdrc.c index f6d9b97..e32bf11 100644 --- a/arch/arm/cpu/armv7/omap3/sdrc.c +++ b/arch/arm/cpu/armv7/omap3/sdrc.c @@ -113,18 +113,18 @@ u32 get_sdr_cs_offset(u32 cs) * - Test CS to make sure it's OK for use */ static void write_sdrc_timings(u32 cs, struct sdrc_actim *sdrc_actim_base, - u32 mcfg, u32 ctrla, u32 ctrlb, u32 rfr_ctrl, u32 mr) + struct board_sdrc_timings *timings) { /* Setup timings we got from the board. */ - writel(mcfg, &sdrc_base->cs[cs].mcfg); - writel(ctrla, &sdrc_actim_base->ctrla); - writel(ctrlb, &sdrc_actim_base->ctrlb); - writel(rfr_ctrl, &sdrc_base->cs[cs].rfr_ctrl); + writel(timings->mcfg, &sdrc_base->cs[cs].mcfg); + writel(timings->ctrla, &sdrc_actim_base->ctrla); + writel(timings->ctrlb, &sdrc_actim_base->ctrlb); + writel(timings->rfr_ctrl, &sdrc_base->cs[cs].rfr_ctrl); writel(CMD_NOP, &sdrc_base->cs[cs].manual); writel(CMD_PRECHARGE, &sdrc_base->cs[cs].manual); writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); writel(CMD_AUTOREFRESH, &sdrc_base->cs[cs].manual); - writel(mr, &sdrc_base->cs[cs].mr); + writel(timings->mr, &sdrc_base->cs[cs].mr); /* * Test ram in this bank @@ -143,7 +143,7 @@ static void write_sdrc_timings(u32 cs, struct sdrc_actim *sdrc_actim_base, void do_sdrc_init(u32 cs, u32 early) { struct sdrc_actim *sdrc_actim_base0, *sdrc_actim_base1; - u32 mcfg, ctrla, ctrlb, rfr_ctrl, mr; + struct board_sdrc_timings timings; sdrc_actim_base0 = (struct sdrc_actim *)SDRC_ACTIM_CTRL0_BASE; sdrc_actim_base1 = (struct sdrc_actim *)SDRC_ACTIM_CTRL1_BASE; @@ -158,7 +158,7 @@ void do_sdrc_init(u32 cs, u32 early) * setup CS1. */ #ifdef CONFIG_SPL_BUILD - get_board_mem_timings(&mcfg, &ctrla, &ctrlb, &rfr_ctrl, &mr); + get_board_mem_timings(&timings); #endif if (early) { /* reset sdrc controller */ @@ -177,11 +177,9 @@ void do_sdrc_init(u32 cs, u32 early) writel(ENADLL | DLLPHASE_90, &sdrc_base->dlla_ctrl); sdelay(0x20000); #ifdef CONFIG_SPL_BUILD - write_sdrc_timings(CS0, sdrc_actim_base0, mcfg, ctrla, ctrlb, - rfr_ctrl, mr); + write_sdrc_timings(CS0, sdrc_actim_base0, &timings); make_cs1_contiguous(); - write_sdrc_timings(CS1, sdrc_actim_base1, mcfg, ctrla, ctrlb, - rfr_ctrl, mr); + write_sdrc_timings(CS1, sdrc_actim_base1, &timings); #endif } @@ -193,14 +191,12 @@ void do_sdrc_init(u32 cs, u32 early) * so we may be asked now to setup CS1. */ if (cs == CS1) { - mcfg = readl(&sdrc_base->cs[CS0].mcfg), - rfr_ctrl = readl(&sdrc_base->cs[CS0].rfr_ctrl); - ctrla = readl(&sdrc_actim_base0->ctrla), - ctrlb = readl(&sdrc_actim_base0->ctrlb); - mr = readl(&sdrc_base->cs[CS0].mr); - write_sdrc_timings(cs, sdrc_actim_base1, mcfg, ctrla, ctrlb, - rfr_ctrl, mr); - + timings.mcfg = readl(&sdrc_base->cs[CS0].mcfg), + timings.rfr_ctrl = readl(&sdrc_base->cs[CS0].rfr_ctrl); + timings.ctrla = readl(&sdrc_actim_base0->ctrla); + timings.ctrlb = readl(&sdrc_actim_base0->ctrlb); + timings.mr = readl(&sdrc_base->cs[CS0].mr); + write_sdrc_timings(cs, sdrc_actim_base1, &timings); } } diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c index 5bd0a88..12c5803 100644 --- a/arch/arm/cpu/armv7/omap4/clocks.c +++ b/arch/arm/cpu/armv7/omap4/clocks.c @@ -44,7 +44,7 @@ */ #define printf(fmt, args...) #define puts(s) -#endif +#endif /* !CONFIG_SPL_BUILD */ struct omap4_prcm_regs *const prcm = (struct omap4_prcm_regs *)0x4A004100; diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c index 2c34e48..f4123aa 100644 --- a/arch/arm/cpu/armv7/omap4/hwinit.c +++ b/arch/arm/cpu/armv7/omap4/hwinit.c @@ -116,7 +116,7 @@ void do_io_settings(void) if ((omap4_rev < OMAP4460_ES1_0) || !readl(&ctrl->control_efuse_2)) writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2); } -#endif +#endif /* CONFIG_SPL_BUILD */ /* dummy fuction for omap4 */ void config_data_eye_leveling_samples(u32 emif_base) @@ -182,4 +182,4 @@ void v7_outer_cache_disable(void) { set_pl310_ctrl_reg(0); } -#endif +#endif /* !CONFIG_SYS_L2CACHE_OFF */ diff --git a/arch/arm/cpu/armv7/s5p-common/Makefile b/arch/arm/cpu/armv7/s5p-common/Makefile index f975f3f..1705399 100644 --- a/arch/arm/cpu/armv7/s5p-common/Makefile +++ b/arch/arm/cpu/armv7/s5p-common/Makefile @@ -28,7 +28,6 @@ LIB = $(obj)libs5p-common.o COBJS-y += cpu_info.o COBJS-y += timer.o COBJS-y += sromc.o -COBJS-y += wdt.o COBJS-$(CONFIG_PWM) += pwm.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/tegra20/Makefile b/arch/arm/cpu/armv7/tegra20/Makefile index 09a0314..54ed8c4 100644 --- a/arch/arm/cpu/armv7/tegra20/Makefile +++ b/arch/arm/cpu/armv7/tegra20/Makefile @@ -28,6 +28,8 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(SOC).o COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o +COBJS-$(CONFIG_PWM_TEGRA) += pwm.o +COBJS-$(CONFIG_VIDEO_TEGRA) += display.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/tegra20/display.c b/arch/arm/cpu/armv7/tegra20/display.c new file mode 100644 index 0000000..031f9a8 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra20/display.c @@ -0,0 +1,409 @@ +/* + * (C) Copyright 2010 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/tegra.h> +#include <asm/arch/display.h> +#include <asm/arch/dc.h> +#include <asm/arch-tegra/clk_rst.h> +#include <asm/arch-tegra/timer.h> + +static struct fdt_disp_config config; + +static void update_window(struct dc_ctlr *dc, struct disp_ctl_win *win) +{ + unsigned h_dda, v_dda; + unsigned long val; + + val = readl(&dc->cmd.disp_win_header); + val |= WINDOW_A_SELECT; + writel(val, &dc->cmd.disp_win_header); + + writel(win->fmt, &dc->win.color_depth); + + clrsetbits_le32(&dc->win.byte_swap, BYTE_SWAP_MASK, + BYTE_SWAP_NOSWAP << BYTE_SWAP_SHIFT); + + val = win->out_x << H_POSITION_SHIFT; + val |= win->out_y << V_POSITION_SHIFT; + writel(val, &dc->win.pos); + + val = win->out_w << H_SIZE_SHIFT; + val |= win->out_h << V_SIZE_SHIFT; + writel(val, &dc->win.size); + + val = (win->w * win->bpp / 8) << H_PRESCALED_SIZE_SHIFT; + val |= win->h << V_PRESCALED_SIZE_SHIFT; + writel(val, &dc->win.prescaled_size); + + writel(0, &dc->win.h_initial_dda); + writel(0, &dc->win.v_initial_dda); + + h_dda = (win->w * 0x1000) / max(win->out_w - 1, 1); + v_dda = (win->h * 0x1000) / max(win->out_h - 1, 1); + + val = h_dda << H_DDA_INC_SHIFT; + val |= v_dda << V_DDA_INC_SHIFT; + writel(val, &dc->win.dda_increment); + + writel(win->stride, &dc->win.line_stride); + writel(0, &dc->win.buf_stride); + + val = WIN_ENABLE; + if (win->bpp < 24) + val |= COLOR_EXPAND; + writel(val, &dc->win.win_opt); + + writel((unsigned long)win->phys_addr, &dc->winbuf.start_addr); + writel(win->x, &dc->winbuf.addr_h_offset); + writel(win->y, &dc->winbuf.addr_v_offset); + + writel(0xff00, &dc->win.blend_nokey); + writel(0xff00, &dc->win.blend_1win); + + val = GENERAL_ACT_REQ | WIN_A_ACT_REQ; + val |= GENERAL_UPDATE | WIN_A_UPDATE; + writel(val, &dc->cmd.state_ctrl); +} + +static void write_pair(struct fdt_disp_config *config, int item, u32 *reg) +{ + writel(config->horiz_timing[item] | + (config->vert_timing[item] << 16), reg); +} + +static int update_display_mode(struct dc_disp_reg *disp, + struct fdt_disp_config *config) +{ + unsigned long val; + unsigned long rate; + unsigned long div; + + writel(0x0, &disp->disp_timing_opt); + write_pair(config, FDT_LCD_TIMING_REF_TO_SYNC, &disp->ref_to_sync); + write_pair(config, FDT_LCD_TIMING_SYNC_WIDTH, &disp->sync_width); + write_pair(config, FDT_LCD_TIMING_BACK_PORCH, &disp->back_porch); + write_pair(config, FDT_LCD_TIMING_FRONT_PORCH, &disp->front_porch); + + writel(config->width | (config->height << 16), &disp->disp_active); + + val = DE_SELECT_ACTIVE << DE_SELECT_SHIFT; + val |= DE_CONTROL_NORMAL << DE_CONTROL_SHIFT; + writel(val, &disp->data_enable_opt); + + val = DATA_FORMAT_DF1P1C << DATA_FORMAT_SHIFT; + val |= DATA_ALIGNMENT_MSB << DATA_ALIGNMENT_SHIFT; + val |= DATA_ORDER_RED_BLUE << DATA_ORDER_SHIFT; + writel(val, &disp->disp_interface_ctrl); + + /* + * The pixel clock divider is in 7.1 format (where the bottom bit + * represents 0.5). Here we calculate the divider needed to get from + * the display clock (typically 600MHz) to the pixel clock. We round + * up or down as requried. + */ + rate = clock_get_periph_rate(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL); + div = ((rate * 2 + config->pixel_clock / 2) / config->pixel_clock) - 2; + debug("Display clock %lu, divider %lu\n", rate, div); + + writel(0x00010001, &disp->shift_clk_opt); + + val = PIXEL_CLK_DIVIDER_PCD1 << PIXEL_CLK_DIVIDER_SHIFT; + val |= div << SHIFT_CLK_DIVIDER_SHIFT; + writel(val, &disp->disp_clk_ctrl); + + return 0; +} + +/* Start up the display and turn on power to PWMs */ +static void basic_init(struct dc_cmd_reg *cmd) +{ + u32 val; + + writel(0x00000100, &cmd->gen_incr_syncpt_ctrl); + writel(0x0000011a, &cmd->cont_syncpt_vsync); + writel(0x00000000, &cmd->int_type); + writel(0x00000000, &cmd->int_polarity); + writel(0x00000000, &cmd->int_mask); + writel(0x00000000, &cmd->int_enb); + + val = PW0_ENABLE | PW1_ENABLE | PW2_ENABLE; + val |= PW3_ENABLE | PW4_ENABLE | PM0_ENABLE; + val |= PM1_ENABLE; + writel(val, &cmd->disp_pow_ctrl); + + val = readl(&cmd->disp_cmd); + val |= CTRL_MODE_C_DISPLAY << CTRL_MODE_SHIFT; + writel(val, &cmd->disp_cmd); +} + +static void basic_init_timer(struct dc_disp_reg *disp) +{ + writel(0x00000020, &disp->mem_high_pri); + writel(0x00000001, &disp->mem_high_pri_timer); +} + +static const u32 rgb_enb_tab[PIN_REG_COUNT] = { + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, +}; + +static const u32 rgb_polarity_tab[PIN_REG_COUNT] = { + 0x00000000, + 0x01000000, + 0x00000000, + 0x00000000, +}; + +static const u32 rgb_data_tab[PIN_REG_COUNT] = { + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, +}; + +static const u32 rgb_sel_tab[PIN_OUTPUT_SEL_COUNT] = { + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00210222, + 0x00002200, + 0x00020000, +}; + +static void rgb_enable(struct dc_com_reg *com) +{ + int i; + + for (i = 0; i < PIN_REG_COUNT; i++) { + writel(rgb_enb_tab[i], &com->pin_output_enb[i]); + writel(rgb_polarity_tab[i], &com->pin_output_polarity[i]); + writel(rgb_data_tab[i], &com->pin_output_data[i]); + } + + for (i = 0; i < PIN_OUTPUT_SEL_COUNT; i++) + writel(rgb_sel_tab[i], &com->pin_output_sel[i]); +} + +int setup_window(struct disp_ctl_win *win, struct fdt_disp_config *config) +{ + win->x = 0; + win->y = 0; + win->w = config->width; + win->h = config->height; + win->out_x = 0; + win->out_y = 0; + win->out_w = config->width; + win->out_h = config->height; + win->phys_addr = config->frame_buffer; + win->stride = config->width * (1 << config->log2_bpp) / 8; + debug("%s: depth = %d\n", __func__, config->log2_bpp); + switch (config->log2_bpp) { + case 5: + case 24: + win->fmt = COLOR_DEPTH_R8G8B8A8; + win->bpp = 32; + break; + case 4: + win->fmt = COLOR_DEPTH_B5G6R5; + win->bpp = 16; + break; + + default: + debug("Unsupported LCD bit depth"); + return -1; + } + + return 0; +} + +struct fdt_disp_config *tegra_display_get_config(void) +{ + return config.valid ? &config : NULL; +} + +static void debug_timing(const char *name, unsigned int timing[]) +{ +#ifdef DEBUG + int i; + + debug("%s timing: ", name); + for (i = 0; i < FDT_LCD_TIMING_COUNT; i++) + debug("%d ", timing[i]); + debug("\n"); +#endif +} + +/** + * Decode panel information from the fdt, according to a standard binding + * + * @param blob fdt blob + * @param node offset of fdt node to read from + * @param config structure to store fdt config into + * @return 0 if ok, -ve on error + */ +static int tegra_decode_panel(const void *blob, int node, + struct fdt_disp_config *config) +{ + int front, back, ref; + + config->width = fdtdec_get_int(blob, node, "xres", -1); + config->height = fdtdec_get_int(blob, node, "yres", -1); + config->pixel_clock = fdtdec_get_int(blob, node, "clock", 0); + if (!config->pixel_clock || config->width == -1 || + config->height == -1) { + debug("%s: Pixel parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + back = fdtdec_get_int(blob, node, "left-margin", -1); + front = fdtdec_get_int(blob, node, "right-margin", -1); + ref = fdtdec_get_int(blob, node, "hsync-len", -1); + if ((back | front | ref) == -1) { + debug("%s: Horizontal parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + /* Use a ref-to-sync of 1 always, and take this from the front porch */ + config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1; + config->horiz_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref; + config->horiz_timing[FDT_LCD_TIMING_BACK_PORCH] = back; + config->horiz_timing[FDT_LCD_TIMING_FRONT_PORCH] = front - + config->horiz_timing[FDT_LCD_TIMING_REF_TO_SYNC]; + debug_timing("horiz", config->horiz_timing); + + back = fdtdec_get_int(blob, node, "upper-margin", -1); + front = fdtdec_get_int(blob, node, "lower-margin", -1); + ref = fdtdec_get_int(blob, node, "vsync-len", -1); + if ((back | front | ref) == -1) { + debug("%s: Vertical parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + + config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC] = 1; + config->vert_timing[FDT_LCD_TIMING_SYNC_WIDTH] = ref; + config->vert_timing[FDT_LCD_TIMING_BACK_PORCH] = back; + config->vert_timing[FDT_LCD_TIMING_FRONT_PORCH] = front - + config->vert_timing[FDT_LCD_TIMING_REF_TO_SYNC]; + debug_timing("vert", config->vert_timing); + + return 0; +} + +/** + * Decode the display controller information from the fdt. + * + * @param blob fdt blob + * @param config structure to store fdt config into + * @return 0 if ok, -ve on error + */ +static int tegra_display_decode_config(const void *blob, + struct fdt_disp_config *config) +{ + int node, rgb; + int bpp, bit; + + /* TODO: Support multiple controllers */ + node = fdtdec_next_compatible(blob, 0, COMPAT_NVIDIA_TEGRA20_DC); + if (node < 0) { + debug("%s: Cannot find display controller node in fdt\n", + __func__); + return node; + } + config->disp = (struct disp_ctlr *)fdtdec_get_addr(blob, node, "reg"); + if (!config->disp) { + debug("%s: No display controller address\n", __func__); + return -1; + } + + rgb = fdt_subnode_offset(blob, node, "rgb"); + + config->panel_node = fdtdec_lookup_phandle(blob, rgb, "nvidia,panel"); + if (!config->panel_node < 0) { + debug("%s: Cannot find panel information\n", __func__); + return -1; + } + + if (tegra_decode_panel(blob, config->panel_node, config)) { + debug("%s: Failed to decode panel information\n", __func__); + return -1; + } + + bpp = fdtdec_get_int(blob, config->panel_node, "nvidia,bits-per-pixel", + -1); + bit = ffs(bpp) - 1; + if (bpp == (1 << bit)) + config->log2_bpp = bit; + else + config->log2_bpp = bpp; + if (bpp == -1) { + debug("%s: Pixel bpp parameters missing\n", __func__); + return -FDT_ERR_NOTFOUND; + } + config->bpp = bpp; + + config->valid = 1; /* we have a valid configuration */ + + return 0; +} + +int tegra_display_probe(const void *blob, void *default_lcd_base) +{ + struct disp_ctl_win window; + struct dc_ctlr *dc; + + if (tegra_display_decode_config(blob, &config)) + return -1; + + config.frame_buffer = (u32)default_lcd_base; + + dc = (struct dc_ctlr *)config.disp; + + /* + * A header file for clock constants was NAKed upstream. + * TODO: Put this into the FDT and fdt_lcd struct when we have clock + * support there + */ + clock_start_periph_pll(PERIPH_ID_HOST1X, CLOCK_ID_PERIPH, + 144 * 1000000); + clock_start_periph_pll(PERIPH_ID_DISP1, CLOCK_ID_CGENERAL, + 600 * 1000000); + basic_init(&dc->cmd); + basic_init_timer(&dc->disp); + rgb_enable(&dc->com); + + if (config.pixel_clock) + update_display_mode(&dc->disp, &config); + + if (setup_window(&window, &config)) + return -1; + + update_window(dc, &window); + + return 0; +} diff --git a/arch/arm/cpu/armv7/tegra20/pwm.c b/arch/arm/cpu/armv7/tegra20/pwm.c new file mode 100644 index 0000000..b655c5c --- /dev/null +++ b/arch/arm/cpu/armv7/tegra20/pwm.c @@ -0,0 +1,101 @@ +/* + * Tegra2 pulse width frequency modulator definitions + * + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <fdtdec.h> +#include <asm/io.h> +#include <asm/arch/clock.h> +#include <asm/arch/pwm.h> + +struct pwm_info { + struct pwm_ctlr *pwm; /* Registers for our pwm controller */ + int pwm_node; /* PWM device tree node */ +} local; + +void pwm_enable(unsigned channel, int rate, int pulse_width, int freq_divider) +{ + u32 reg; + + assert(channel < PWM_NUM_CHANNELS); + + /* TODO: Can we use clock_adjust_periph_pll_div() here? */ + clock_start_periph_pll(PERIPH_ID_PWM, CLOCK_ID_SFROM32KHZ, rate); + + reg = PWM_ENABLE_MASK; + reg |= pulse_width << PWM_WIDTH_SHIFT; + reg |= freq_divider << PWM_DIVIDER_SHIFT; + writel(reg, &local.pwm[channel].control); + debug("%s: channel=%d, rate=%d\n", __func__, channel, rate); +} + +int pwm_request(const void *blob, int node, const char *prop_name) +{ + int pwm_node; + u32 data[3]; + + if (fdtdec_get_int_array(blob, node, prop_name, data, + ARRAY_SIZE(data))) { + debug("%s: Cannot decode PWM property '%s'\n", __func__, + prop_name); + return -1; + } + + pwm_node = fdt_node_offset_by_phandle(blob, data[0]); + if (pwm_node != local.pwm_node) { + debug("%s: PWM property '%s' phandle %d not recognised" + "- expecting %d\n", __func__, prop_name, data[0], + local.pwm_node); + return -1; + } + if (data[1] >= PWM_NUM_CHANNELS) { + debug("%s: PWM property '%s': invalid channel %u\n", __func__, + prop_name, data[1]); + return -1; + } + + /* + * TODO: We could maintain a list of requests, but it might not be + * worth it for U-Boot. + */ + return data[1]; +} + +int pwm_init(const void *blob) +{ + local.pwm_node = fdtdec_next_compatible(blob, 0, + COMPAT_NVIDIA_TEGRA20_PWM); + if (local.pwm_node < 0) { + debug("%s: Cannot find device tree node\n", __func__); + return -1; + } + + local.pwm = (struct pwm_ctlr *)fdtdec_get_addr(blob, local.pwm_node, + "reg"); + if (local.pwm == (struct pwm_ctlr *)FDT_ADDR_T_NONE) { + debug("%s: Cannot find pwm reg address\n", __func__); + return -1; + } + debug("Tegra PWM at %p, node %d\n", local.pwm, local.pwm_node); + + return 0; +} diff --git a/arch/arm/cpu/tegra20-common/funcmux.c b/arch/arm/cpu/tegra20-common/funcmux.c index 00b8029..ece7ad9 100644 --- a/arch/arm/cpu/tegra20-common/funcmux.c +++ b/arch/arm/cpu/tegra20-common/funcmux.c @@ -25,6 +25,30 @@ #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> +/* + * The PINMUX macro is used to set up pinmux tables. + */ +#define PINMUX(grp, mux, pupd, tri) \ + {PINGRP_##grp, PMUX_FUNC_##mux, PMUX_PULL_##pupd, PMUX_TRI_##tri} + +static const struct pingroup_config disp1_default[] = { + PINMUX(LDI, DISPA, NORMAL, NORMAL), + PINMUX(LHP0, DISPA, NORMAL, NORMAL), + PINMUX(LHP1, DISPA, NORMAL, NORMAL), + PINMUX(LHP2, DISPA, NORMAL, NORMAL), + PINMUX(LHS, DISPA, NORMAL, NORMAL), + PINMUX(LM0, RSVD4, NORMAL, NORMAL), + PINMUX(LPP, DISPA, NORMAL, NORMAL), + PINMUX(LPW0, DISPA, NORMAL, NORMAL), + PINMUX(LPW2, DISPA, NORMAL, NORMAL), + PINMUX(LSC0, DISPA, NORMAL, NORMAL), + PINMUX(LSPI, DISPA, NORMAL, NORMAL), + PINMUX(LVP1, DISPA, NORMAL, NORMAL), + PINMUX(LVS, DISPA, NORMAL, NORMAL), + PINMUX(SLXD, SPDIF, NORMAL, NORMAL), +}; + + int funcmux_select(enum periph_id id, int config) { int bad_config = config != FUNCMUX_DEFAULT; @@ -257,6 +281,19 @@ int funcmux_select(enum periph_id id, int config) break; } break; + case PERIPH_ID_DISP1: + if (config == FUNCMUX_DEFAULT) { + int i; + + for (i = PINGRP_LD0; i <= PINGRP_LD17; i++) { + pinmux_set_func(i, PMUX_FUNC_DISPA); + pinmux_tristate_disable(i); + pinmux_set_pullupdown(i, PMUX_PULL_NORMAL); + } + pinmux_config_table(disp1_default, + ARRAY_SIZE(disp1_default)); + } + break; default: debug("%s: invalid periph_id %d", __func__, id); diff --git a/arch/arm/cpu/tegra20-common/pinmux.c b/arch/arm/cpu/tegra20-common/pinmux.c index 08b8305..a2a0916 100644 --- a/arch/arm/cpu/tegra20-common/pinmux.c +++ b/arch/arm/cpu/tegra20-common/pinmux.c @@ -554,7 +554,7 @@ void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func) writel(reg, muxctl); } -void pinmux_config_pingroup(struct pingroup_config *config) +void pinmux_config_pingroup(const struct pingroup_config *config) { enum pmux_pingrp pin = config->pingroup; @@ -563,7 +563,7 @@ void pinmux_config_pingroup(struct pingroup_config *config) pinmux_set_tristate(pin, config->tristate); } -void pinmux_config_table(struct pingroup_config *config, int len) +void pinmux_config_table(const struct pingroup_config *config, int len) { int i; diff --git a/arch/arm/dts/tegra20.dtsi b/arch/arm/dts/tegra20.dtsi index d936b1e..636ec2c 100644 --- a/arch/arm/dts/tegra20.dtsi +++ b/arch/arm/dts/tegra20.dtsi @@ -211,4 +211,109 @@ compatible = "nvidia,tegra20-nand"; reg = <0x70008000 0x100>; }; + + pwm: pwm@7000a000 { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + }; + + host1x { + compatible = "nvidia,tegra20-host1x", "simple-bus"; + reg = <0x50000000 0x00024000>; + interrupts = <0 65 0x04 /* mpcore syncpt */ + 0 67 0x04>; /* mpcore general */ + status = "disabled"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x04000000>; + + /* video-encoding/decoding */ + mpe { + reg = <0x54040000 0x00040000>; + interrupts = <0 68 0x04>; + status = "disabled"; + }; + + /* video input */ + vi { + reg = <0x54080000 0x00040000>; + interrupts = <0 69 0x04>; + status = "disabled"; + }; + + /* EPP */ + epp { + reg = <0x540c0000 0x00040000>; + interrupts = <0 70 0x04>; + status = "disabled"; + }; + + /* ISP */ + isp { + reg = <0x54100000 0x00040000>; + interrupts = <0 71 0x04>; + status = "disabled"; + }; + + /* 2D engine */ + gr2d { + reg = <0x54140000 0x00040000>; + interrupts = <0 72 0x04>; + status = "disabled"; + }; + + /* 3D engine */ + gr3d { + reg = <0x54180000 0x00040000>; + status = "disabled"; + }; + + /* display controllers */ + dc@54200000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <0 73 0x04>; + status = "disabled"; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <0 74 0x04>; + status = "disabled"; + + rgb { + status = "disabled"; + }; + }; + + /* outputs */ + hdmi { + compatible = "nvidia,tegra20-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <0 75 0x04>; + status = "disabled"; + }; + + tvo { + compatible = "nvidia,tegra20-tvo"; + reg = <0x542c0000 0x00040000>; + interrupts = <0 76 0x04>; + status = "disabled"; + }; + + dsi { + compatible = "nvidia,tegra20-dsi"; + reg = <0x54300000 0x00040000>; + status = "disabled"; + }; + }; + }; diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h index d6c038e..16e8a80 100644 --- a/arch/arm/include/asm/arch-am33xx/cpu.h +++ b/arch/arm/include/asm/arch-am33xx/cpu.h @@ -60,6 +60,59 @@ #ifndef __KERNEL_STRICT_NAMES #ifndef __ASSEMBLY__ +struct gpmc_cs { + u32 config1; /* 0x00 */ + u32 config2; /* 0x04 */ + u32 config3; /* 0x08 */ + u32 config4; /* 0x0C */ + u32 config5; /* 0x10 */ + u32 config6; /* 0x14 */ + u32 config7; /* 0x18 */ + u32 nand_cmd; /* 0x1C */ + u32 nand_adr; /* 0x20 */ + u32 nand_dat; /* 0x24 */ + u8 res[8]; /* blow up to 0x30 byte */ +}; + +struct bch_res_0_3 { + u32 bch_result_x[4]; +}; + +struct gpmc { + u8 res1[0x10]; + u32 sysconfig; /* 0x10 */ + u8 res2[0x4]; + u32 irqstatus; /* 0x18 */ + u32 irqenable; /* 0x1C */ + u8 res3[0x20]; + u32 timeout_control; /* 0x40 */ + u8 res4[0xC]; + u32 config; /* 0x50 */ + u32 status; /* 0x54 */ + u8 res5[0x8]; /* 0x58 */ + struct gpmc_cs cs[8]; /* 0x60, 0x90, .. */ + u8 res6[0x14]; /* 0x1E0 */ + u32 ecc_config; /* 0x1F4 */ + u32 ecc_control; /* 0x1F8 */ + u32 ecc_size_config; /* 0x1FC */ + u32 ecc1_result; /* 0x200 */ + u32 ecc2_result; /* 0x204 */ + u32 ecc3_result; /* 0x208 */ + u32 ecc4_result; /* 0x20C */ + u32 ecc5_result; /* 0x210 */ + u32 ecc6_result; /* 0x214 */ + u32 ecc7_result; /* 0x218 */ + u32 ecc8_result; /* 0x21C */ + u32 ecc9_result; /* 0x220 */ + u8 res7[12]; /* 0x224 */ + u32 testmomde_ctrl; /* 0x230 */ + u8 res8[12]; /* 0x234 */ + struct bch_res_0_3 bch_result_0_3[2]; /* 0x240 */ +}; + +/* Used for board specific gpmc initialization */ +extern struct gpmc *gpmc_cfg; + /* Encapsulating core pll registers */ struct cm_wkuppll { unsigned int wkclkstctrl; /* offset 0x00 */ diff --git a/arch/arm/include/asm/arch-am33xx/elm.h b/arch/arm/include/asm/arch-am33xx/elm.h new file mode 100644 index 0000000..e80f7d4 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/elm.h @@ -0,0 +1,93 @@ +/* + * (C) Copyright 2010-2011 Texas Instruments, <www.ti.com> + * Mansoor Ahamed <mansoor.ahamed@ti.com> + * + * Derived from work done by Rohit Choraria <rohitkc@ti.com> for omap3 + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_ELM_H +#define __ASM_ARCH_ELM_H +/* + * ELM Module Registers + */ + +/* ELM registers bit fields */ +#define ELM_SYSCONFIG_SOFTRESET_MASK (0x2) +#define ELM_SYSCONFIG_SOFTRESET (0x2) +#define ELM_SYSSTATUS_RESETDONE_MASK (0x1) +#define ELM_SYSSTATUS_RESETDONE (0x1) +#define ELM_LOCATION_CONFIG_ECC_BCH_LEVEL_MASK (0x3) +#define ELM_LOCATION_CONFIG_ECC_SIZE_MASK (0x7FF0000) +#define ELM_LOCATION_CONFIG_ECC_SIZE_POS (16) +#define ELM_SYNDROME_FRAGMENT_6_SYNDROME_VALID (0x00010000) +#define ELM_LOCATION_STATUS_ECC_CORRECTABLE_MASK (0x100) +#define ELM_LOCATION_STATUS_ECC_NB_ERRORS_MASK (0x1F) + +#ifndef __ASSEMBLY__ + +enum bch_level { + BCH_4_BIT = 0, + BCH_8_BIT, + BCH_16_BIT +}; + + +/* BCH syndrome registers */ +struct syndrome { + u32 syndrome_fragment_x[7]; /* 0x400, 0x404.... 0x418 */ + u8 res1[36]; /* 0x41c */ +}; + +/* BCH error status & location register */ +struct location { + u32 location_status; /* 0x800 */ + u8 res1[124]; /* 0x804 */ + u32 error_location_x[16]; /* 0x880.... */ + u8 res2[64]; /* 0x8c0 */ +}; + +/* BCH ELM register map - do not try to allocate memmory for this structure. + * We have used plenty of reserved variables to fill the slots in the ELM + * register memory map. + * Directly initialize the struct pointer to ELM base address. + */ +struct elm { + u32 rev; /* 0x000 */ + u8 res1[12]; /* 0x004 */ + u32 sysconfig; /* 0x010 */ + u32 sysstatus; /* 0x014 */ + u32 irqstatus; /* 0x018 */ + u32 irqenable; /* 0x01c */ + u32 location_config; /* 0x020 */ + u8 res2[92]; /* 0x024 */ + u32 page_ctrl; /* 0x080 */ + u8 res3[892]; /* 0x084 */ + struct syndrome syndrome_fragments[8]; /* 0x400 */ + u8 res4[512]; /* 0x600 */ + struct location error_location[8]; /* 0x800 */ +}; + +int elm_check_error(u8 *syndrome, u32 nibbles, u32 *error_count, + u32 *error_locations); +int elm_config(enum bch_level level); +void elm_reset(void); +void elm_init(void); +#endif /* __ASSEMBLY__ */ +#endif /* __ASM_ARCH_ELM_H */ diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h index 24ab365..6dd3296 100644 --- a/arch/arm/include/asm/arch-am33xx/hardware.h +++ b/arch/arm/include/asm/arch-am33xx/hardware.h @@ -80,6 +80,9 @@ #define DDRPHY_0_CONFIG_BASE (CTRL_BASE + 0x1400) #define DDRPHY_CONFIG_BASE DDRPHY_0_CONFIG_BASE +/* GPMC Base address */ +#define GPMC_BASE 0x50000000 + /* CPSW Config space */ #define AM335X_CPSW_BASE 0x4A100000 #define AM335X_CPSW_MDIO_BASE 0x4A101000 diff --git a/arch/arm/include/asm/arch-am33xx/mem.h b/arch/arm/include/asm/arch-am33xx/mem.h new file mode 100644 index 0000000..c3bf74e --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/mem.h @@ -0,0 +1,83 @@ +/* + * (C) Copyright 2006-2008 + * Texas Instruments, <www.ti.com> + * + * Author + * Mansoor Ahamed <mansoor.ahamed@ti.com> + * + * Initial Code from: + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _MEM_H_ +#define _MEM_H_ + +/* + * GPMC settings - + * Definitions is as per the following format + * #define <PART>_GPMC_CONFIG<x> <value> + * Where: + * PART is the part name e.g. STNOR - Intel Strata Flash + * x is GPMC config registers from 1 to 6 (there will be 6 macros) + * Value is corresponding value + * + * For every valid PRCM configuration there should be only one definition of + * the same. if values are independent of the board, this definition will be + * present in this file if values are dependent on the board, then this should + * go into corresponding mem-boardName.h file + * + * Currently valid part Names are (PART): + * M_NAND - Micron NAND + */ +#define GPMC_SIZE_256M 0x0 +#define GPMC_SIZE_128M 0x8 +#define GPMC_SIZE_64M 0xC +#define GPMC_SIZE_32M 0xE +#define GPMC_SIZE_16M 0xF + +#define M_NAND_GPMC_CONFIG1 0x00000800 +#define M_NAND_GPMC_CONFIG2 0x001e1e00 +#define M_NAND_GPMC_CONFIG3 0x001e1e00 +#define M_NAND_GPMC_CONFIG4 0x16051807 +#define M_NAND_GPMC_CONFIG5 0x00151e1e +#define M_NAND_GPMC_CONFIG6 0x16000f80 +#define M_NAND_GPMC_CONFIG7 0x00000008 + +/* max number of GPMC Chip Selects */ +#define GPMC_MAX_CS 8 +/* max number of GPMC regs */ +#define GPMC_MAX_REG 7 + +#define PISMO1_NOR 1 +#define PISMO1_NAND 2 +#define PISMO2_CS0 3 +#define PISMO2_CS1 4 +#define PISMO1_ONENAND 5 +#define DBG_MPDB 6 +#define PISMO2_NAND_CS0 7 +#define PISMO2_NAND_CS1 8 + +/* make it readable for the gpmc_init */ +#define PISMO1_NOR_BASE FLASH_BASE +#define PISMO1_NAND_BASE CONFIG_SYS_NAND_BASE +#define PISMO1_NAND_SIZE GPMC_SIZE_256M + +#endif /* endif _MEM_H_ */ diff --git a/arch/arm/include/asm/arch-am33xx/omap_gpmc.h b/arch/arm/include/asm/arch-am33xx/omap_gpmc.h new file mode 100644 index 0000000..572f9d0 --- /dev/null +++ b/arch/arm/include/asm/arch-am33xx/omap_gpmc.h @@ -0,0 +1,120 @@ +/* + * (C) Copyright 2004-2008 Texas Instruments, <www.ti.com> + * Rohit Choraria <rohitkc@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef __ASM_ARCH_OMAP_GPMC_H +#define __ASM_ARCH_OMAP_GPMC_H + +#define GPMC_BUF_EMPTY 0 +#define GPMC_BUF_FULL 1 + +#define ECCCLEAR (0x1 << 8) +#define ECCRESULTREG1 (0x1 << 0) +#define ECCSIZE512BYTE 0xFF +#define ECCSIZE1 (ECCSIZE512BYTE << 22) +#define ECCSIZE0 (ECCSIZE512BYTE << 12) +#define ECCSIZE0SEL (0x000 << 0) + +/* Generic ECC Layouts */ +/* Large Page x8 NAND device Layout */ +#ifdef GPMC_NAND_ECC_LP_x8_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 12,\ + .eccpos = {1, 2, 3, 4, 5, 6, 7, 8,\ + 9, 10, 11, 12},\ + .oobfree = {\ + {.offset = 13,\ + .length = 51 } } \ +} +#endif + +/* Large Page x16 NAND device Layout */ +#ifdef GPMC_NAND_ECC_LP_x16_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 12,\ + .eccpos = {2, 3, 4, 5, 6, 7, 8, 9,\ + 10, 11, 12, 13},\ + .oobfree = {\ + {.offset = 14,\ + .length = 50 } } \ +} +#endif + +/* Small Page x8 NAND device Layout */ +#ifdef GPMC_NAND_ECC_SP_x8_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 3,\ + .eccpos = {1, 2, 3},\ + .oobfree = {\ + {.offset = 4,\ + .length = 12 } } \ +} +#endif + +/* Small Page x16 NAND device Layout */ +#ifdef GPMC_NAND_ECC_SP_x16_LAYOUT +#define GPMC_NAND_HW_ECC_LAYOUT {\ + .eccbytes = 3,\ + .eccpos = {2, 3, 4},\ + .oobfree = {\ + {.offset = 5,\ + .length = 11 } } \ +} +#endif + +#define GPMC_NAND_HW_BCH4_ECC_LAYOUT {\ + .eccbytes = 32,\ + .eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\ + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\ + 28, 29, 30, 31, 32, 33},\ + .oobfree = {\ + {.offset = 34,\ + .length = 30 } } \ +} + +#define GPMC_NAND_HW_BCH8_ECC_LAYOUT {\ + .eccbytes = 56,\ + .eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\ + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\ + 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,\ + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,\ + 52, 53, 54, 55, 56, 57},\ + .oobfree = {\ + {.offset = 58,\ + .length = 6 } } \ +} + +#define GPMC_NAND_HW_BCH16_ECC_LAYOUT {\ + .eccbytes = 104,\ + .eccpos = {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,\ + 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27,\ + 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39,\ + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51,\ + 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,\ + 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75,\ + 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,\ + 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99,\ + 100, 101, 102, 103, 104, 105},\ + .oobfree = {\ + {.offset = 106,\ + .length = 8 } } \ +} +#endif /* __ASM_ARCH_OMAP_GPMC_H */ diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h index 9cf35e0..588d8de 100644 --- a/arch/arm/include/asm/arch-am33xx/sys_proto.h +++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h @@ -33,4 +33,7 @@ u32 get_device_type(void); void setup_clocks_for_console(void); void ddr_pll_config(unsigned int ddrpll_M); +void sdelay(unsigned long); +void gpmc_init(void); +void omap_nand_switch_ecc(int); #endif diff --git a/arch/arm/include/asm/arch-exynos/clk.h b/arch/arm/include/asm/arch-exynos/clk.h index 5529025..cd12323 100644 --- a/arch/arm/include/asm/arch-exynos/clk.h +++ b/arch/arm/include/asm/arch-exynos/clk.h @@ -38,5 +38,9 @@ void set_mmc_clk(int dev_index, unsigned int div); unsigned long get_lcd_clk(void); void set_lcd_clk(void); void set_mipi_clk(void); +void set_i2s_clk_source(void); +int set_i2s_clk_prescaler(unsigned int src_frq, unsigned int dst_frq); +int set_epll_clk(unsigned long rate); +int set_spi_clk(int periph_id, unsigned int rate); #endif diff --git a/arch/arm/include/asm/arch-exynos/clock.h b/arch/arm/include/asm/arch-exynos/clock.h index fce38ef..ff6781a 100644 --- a/arch/arm/include/asm/arch-exynos/clock.h +++ b/arch/arm/include/asm/arch-exynos/clock.h @@ -595,9 +595,38 @@ struct exynos5_clock { unsigned int pll_div2_sel; unsigned char res123[0xf5d8]; }; + +/* structure for epll configuration used in audio clock configuration */ +struct set_epll_con_val { + unsigned int freq_out; /* frequency out */ + unsigned int en_lock_det; /* enable lock detect */ + unsigned int m_div; /* m divider value */ + unsigned int p_div; /* p divider value */ + unsigned int s_div; /* s divider value */ + unsigned int k_dsm; /* k value of delta signal modulator */ +}; #endif #define MPLL_FOUT_SEL_SHIFT 4 +#define EXYNOS5_EPLLCON0_LOCKED_SHIFT 29 /* EPLL Locked bit position*/ +#define TIMEOUT_EPLL_LOCK 1000 + +#define AUDIO_0_RATIO_MASK 0x0f +#define AUDIO_1_RATIO_MASK 0x0f + +#define AUDIO1_SEL_MASK 0xf +#define CLK_SRC_SCLK_EPLL 0x7 + +/* CON0 bit-fields */ +#define EPLL_CON0_MDIV_MASK 0x1ff +#define EPLL_CON0_PDIV_MASK 0x3f +#define EPLL_CON0_SDIV_MASK 0x7 +#define EPLL_CON0_MDIV_SHIFT 16 +#define EPLL_CON0_PDIV_SHIFT 8 +#define EPLL_CON0_SDIV_SHIFT 0 +#define EPLL_CON0_LOCK_DET_EN_SHIFT 28 +#define EPLL_CON0_LOCK_DET_EN_MASK 1 + #define MPLL_FOUT_SEL_MASK 0x1 #define BPLL_FOUT_SEL_SHIFT 0 #define BPLL_FOUT_SEL_MASK 0x1 diff --git a/arch/arm/include/asm/arch-exynos/cpu.h b/arch/arm/include/asm/arch-exynos/cpu.h index 2cd4ae1..f06af2e 100644 --- a/arch/arm/include/asm/arch-exynos/cpu.h +++ b/arch/arm/include/asm/arch-exynos/cpu.h @@ -28,6 +28,8 @@ #define EXYNOS4_ADDR_BASE 0x10000000 /* EXYNOS4 */ +#define EXYNOS4_I2C_SPACING 0x10000 + #define EXYNOS4_GPIO_PART3_BASE 0x03860000 #define EXYNOS4_PRO_ID 0x10000000 #define EXYNOS4_SYSREG_BASE 0x10010000 @@ -51,12 +53,15 @@ #define EXYNOS4_UART_BASE 0x13800000 #define EXYNOS4_I2C_BASE 0x13860000 #define EXYNOS4_ADC_BASE 0x13910000 +#define EXYNOS4_SPI_BASE 0x13920000 #define EXYNOS4_PWMTIMER_BASE 0x139D0000 #define EXYNOS4_MODEM_BASE 0x13A00000 #define EXYNOS4_USBPHY_CONTROL 0x10020704 +#define EXYNOS4_I2S_BASE 0xE2100000 #define EXYNOS4_GPIO_PART4_BASE DEVICE_NOT_AVAILABLE #define EXYNOS4_DP_BASE DEVICE_NOT_AVAILABLE +#define EXYNOS4_SPI_ISP_BASE DEVICE_NOT_AVAILABLE /* EXYNOS5 */ #define EXYNOS5_I2C_SPACING 0x10000 @@ -81,7 +86,10 @@ #define EXYNOS5_SROMC_BASE 0x12250000 #define EXYNOS5_UART_BASE 0x12C00000 #define EXYNOS5_I2C_BASE 0x12C60000 +#define EXYNOS5_SPI_BASE 0x12D20000 +#define EXYNOS5_I2S_BASE 0x12D60000 #define EXYNOS5_PWMTIMER_BASE 0x12DD0000 +#define EXYNOS5_SPI_ISP_BASE 0x131A0000 #define EXYNOS5_GPIO_PART2_BASE 0x13400000 #define EXYNOS5_FIMD_BASE 0x14400000 #define EXYNOS5_DP_BASE 0x145B0000 @@ -139,6 +147,15 @@ static inline int cpu_is_##type(void) \ IS_SAMSUNG_TYPE(exynos4, 0x4) IS_SAMSUNG_TYPE(exynos5, 0x5) +#define IS_EXYNOS_TYPE(type, id) \ +static inline int proid_is_##type(void) \ +{ \ + return s5p_cpu_id == id; \ +} + +IS_EXYNOS_TYPE(exynos4210, 0x4210) +IS_EXYNOS_TYPE(exynos5250, 0x5250) + #define SAMSUNG_BASE(device, base) \ static inline unsigned int samsung_get_base_##device(void) \ { \ @@ -156,6 +173,7 @@ SAMSUNG_BASE(dp, DP_BASE) SAMSUNG_BASE(sysreg, SYSREG_BASE) SAMSUNG_BASE(fimd, FIMD_BASE) SAMSUNG_BASE(i2c, I2C_BASE) +SAMSUNG_BASE(i2s, I2S_BASE) SAMSUNG_BASE(mipi_dsim, MIPI_DSIM_BASE) SAMSUNG_BASE(gpio_part1, GPIO_PART1_BASE) SAMSUNG_BASE(gpio_part2, GPIO_PART2_BASE) @@ -173,6 +191,8 @@ SAMSUNG_BASE(usb_ehci, USB_HOST_EHCI_BASE) SAMSUNG_BASE(usb_otg, USBOTG_BASE) SAMSUNG_BASE(watchdog, WATCHDOG_BASE) SAMSUNG_BASE(power, POWER_BASE) +SAMSUNG_BASE(spi, SPI_BASE) +SAMSUNG_BASE(spi_isp, SPI_ISP_BASE) #endif #endif /* _EXYNOS4_CPU_H */ diff --git a/arch/arm/include/asm/arch-exynos/gpio.h b/arch/arm/include/asm/arch-exynos/gpio.h index 97be4ea..4db8fd6 100644 --- a/arch/arm/include/asm/arch-exynos/gpio.h +++ b/arch/arm/include/asm/arch-exynos/gpio.h @@ -207,6 +207,25 @@ static inline unsigned int s5p_gpio_base(int nr) return 0; } +static inline unsigned int s5p_gpio_part_max(int nr) +{ + if (cpu_is_exynos5()) { + if (nr < EXYNOS5_GPIO_PART1_MAX) + return 0; + else if (nr < EXYNOS5_GPIO_PART2_MAX) + return EXYNOS5_GPIO_PART1_MAX; + else + return EXYNOS5_GPIO_PART2_MAX; + + } else if (cpu_is_exynos4()) { + if (nr < EXYNOS4_GPIO_PART1_MAX) + return 0; + else + return EXYNOS4_GPIO_PART1_MAX; + } + + return 0; +} #endif /* Pin configurations */ diff --git a/arch/arm/include/asm/arch-exynos/i2s-regs.h b/arch/arm/include/asm/arch-exynos/i2s-regs.h new file mode 100644 index 0000000..2326ca0 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/i2s-regs.h @@ -0,0 +1,66 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar <rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __I2S_REGS_H__ +#define __I2S_REGS_H__ + +#define CON_TXFIFO_FULL (1 << 8) +#define CON_TXCH_PAUSE (1 << 4) +#define CON_ACTIVE (1 << 0) + +#define MOD_BLCP_SHIFT 24 +#define MOD_BLCP_16BIT (0 << MOD_BLCP_SHIFT) +#define MOD_BLCP_8BIT (1 << MOD_BLCP_SHIFT) +#define MOD_BLCP_24BIT (2 << MOD_BLCP_SHIFT) +#define MOD_BLCP_MASK (3 << MOD_BLCP_SHIFT) + +#define MOD_BLC_16BIT (0 << 13) +#define MOD_BLC_8BIT (1 << 13) +#define MOD_BLC_24BIT (2 << 13) +#define MOD_BLC_MASK (3 << 13) + +#define MOD_SLAVE (1 << 11) +#define MOD_MASK (3 << 8) +#define MOD_LR_LLOW (0 << 7) +#define MOD_LR_RLOW (1 << 7) +#define MOD_SDF_IIS (0 << 5) +#define MOD_SDF_MSB (1 << 5) +#define MOD_SDF_LSB (2 << 5) +#define MOD_SDF_MASK (3 << 5) +#define MOD_RCLK_256FS (0 << 3) +#define MOD_RCLK_512FS (1 << 3) +#define MOD_RCLK_384FS (2 << 3) +#define MOD_RCLK_768FS (3 << 3) +#define MOD_RCLK_MASK (3 << 3) +#define MOD_BCLK_32FS (0 << 1) +#define MOD_BCLK_48FS (1 << 1) +#define MOD_BCLK_16FS (2 << 1) +#define MOD_BCLK_24FS (3 << 1) +#define MOD_BCLK_MASK (3 << 1) + +#define MOD_CDCLKCON (1 << 12) + +#define FIC_TXFLUSH (1 << 15) +#define FIC_RXFLUSH (1 << 7) + +#endif /* __I2S_REGS_H__ */ diff --git a/arch/arm/include/asm/arch-exynos/periph.h b/arch/arm/include/asm/arch-exynos/periph.h index b861d7d..13abd2d 100644 --- a/arch/arm/include/asm/arch-exynos/periph.h +++ b/arch/arm/include/asm/arch-exynos/periph.h @@ -38,11 +38,18 @@ enum periph_id { PERIPH_ID_I2C5, PERIPH_ID_I2C6, PERIPH_ID_I2C7, + PERIPH_ID_I2S1, PERIPH_ID_SDMMC0, PERIPH_ID_SDMMC1, PERIPH_ID_SDMMC2, PERIPH_ID_SDMMC3, + PERIPH_ID_SDMMC4, PERIPH_ID_SROMC, + PERIPH_ID_SPI0, + PERIPH_ID_SPI1, + PERIPH_ID_SPI2, + PERIPH_ID_SPI3, + PERIPH_ID_SPI4, PERIPH_ID_UART0, PERIPH_ID_UART1, PERIPH_ID_UART2, diff --git a/arch/arm/include/asm/arch-exynos/sound.h b/arch/arm/include/asm/arch-exynos/sound.h new file mode 100644 index 0000000..d1bd2f6 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/sound.h @@ -0,0 +1,44 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#ifndef __SOUND_ARCH_H__ +#define __SOUND_ARCH_H__ + +/* I2S values */ +#define I2S_PLL_CLK 192000000 +#define I2S_SAMPLING_RATE 48000 +#define I2S_BITS_PER_SAMPLE 16 +#define I2S_CHANNELS 2 +#define I2S_RFS 256 +#define I2S_BFS 32 + +/* I2C values */ +#define AUDIO_I2C_BUS 1 +#define AUDIO_I2C_REG 0x1a + +/* Audio Codec */ +#define AUDIO_CODEC "wm8994" + +#define AUDIO_COMPAT 1 +#endif diff --git a/arch/arm/include/asm/arch-exynos/spi.h b/arch/arm/include/asm/arch-exynos/spi.h new file mode 100644 index 0000000..7cab1e9 --- /dev/null +++ b/arch/arm/include/asm/arch-exynos/spi.h @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2012 SAMSUNG Electronics + * Padmavathi Venna <padma.v@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_EXYNOS_COMMON_SPI_H_ +#define __ASM_ARCH_EXYNOS_COMMON_SPI_H_ + +#ifndef __ASSEMBLY__ + +/* SPI peripheral register map; padded to 64KB */ +struct exynos_spi { + unsigned int ch_cfg; /* 0x00 */ + unsigned char reserved0[4]; + unsigned int mode_cfg; /* 0x08 */ + unsigned int cs_reg; /* 0x0c */ + unsigned char reserved1[4]; + unsigned int spi_sts; /* 0x14 */ + unsigned int tx_data; /* 0x18 */ + unsigned int rx_data; /* 0x1c */ + unsigned int pkt_cnt; /* 0x20 */ + unsigned char reserved2[4]; + unsigned char reserved3[4]; + unsigned int fb_clk; /* 0x2c */ + unsigned char padding[0xffd0]; +}; + +#define EXYNOS_SPI_MAX_FREQ 50000000 + +#define SPI_TIMEOUT_MS 10 + +/* SPI_CHCFG */ +#define SPI_CH_HS_EN (1 << 6) +#define SPI_CH_RST (1 << 5) +#define SPI_SLAVE_MODE (1 << 4) +#define SPI_CH_CPOL_L (1 << 3) +#define SPI_CH_CPHA_B (1 << 2) +#define SPI_RX_CH_ON (1 << 1) +#define SPI_TX_CH_ON (1 << 0) + +/* SPI_MODECFG */ +#define SPI_MODE_CH_WIDTH_WORD (0x2 << 29) +#define SPI_MODE_BUS_WIDTH_WORD (0x2 << 17) + +/* SPI_CSREG */ +#define SPI_SLAVE_SIG_INACT (1 << 0) + +/* SPI_STS */ +#define SPI_ST_TX_DONE (1 << 25) +#define SPI_FIFO_LVL_MASK 0x1ff +#define SPI_TX_LVL_OFFSET 6 +#define SPI_RX_LVL_OFFSET 15 + +/* Feedback Delay */ +#define SPI_CLK_BYPASS (0 << 0) +#define SPI_FB_DELAY_90 (1 << 0) +#define SPI_FB_DELAY_180 (2 << 0) +#define SPI_FB_DELAY_270 (3 << 0) + +/* Packet Count */ +#define SPI_PACKET_CNT_EN (1 << 16) + +#endif /* __ASSEMBLY__ */ +#endif diff --git a/arch/arm/include/asm/arch-mxs/clock.h b/arch/arm/include/asm/arch-mxs/clock.h index 1700fe3..3d39ef2 100644 --- a/arch/arm/include/asm/arch-mxs/clock.h +++ b/arch/arm/include/asm/arch-mxs/clock.h @@ -35,6 +35,7 @@ enum mxc_clock { MXC_SSP1_CLK, MXC_SSP2_CLK, MXC_SSP3_CLK, + MXC_XTAL_CLK, }; enum mxs_ioclock { diff --git a/arch/arm/include/asm/arch-omap3/sys_proto.h b/arch/arm/include/asm/arch-omap3/sys_proto.h index 9e52b12..d60f2ad 100644 --- a/arch/arm/include/asm/arch-omap3/sys_proto.h +++ b/arch/arm/include/asm/arch-omap3/sys_proto.h @@ -32,6 +32,15 @@ struct emu_hal_params { u32 param1; }; +/* Board SDRC timing values */ +struct board_sdrc_timings { + u32 mcfg; + u32 ctrla; + u32 ctrlb; + u32 rfr_ctrl; + u32 mr; +}; + void prcm_init(void); void per_clocks_enable(void); void ehci_clocks_enable(void); @@ -39,8 +48,8 @@ void ehci_clocks_enable(void); void memif_init(void); void sdrc_init(void); void do_sdrc_init(u32, u32); -void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, - u32 *mr); + +void get_board_mem_timings(struct board_sdrc_timings *timings); void identify_nand_chip(int *mfr, int *id); void emif4_init(void); void gpmc_init(void); diff --git a/arch/arm/include/asm/arch-s5pc1xx/gpio.h b/arch/arm/include/asm/arch-s5pc1xx/gpio.h index 76b901b..00e498d 100644 --- a/arch/arm/include/asm/arch-s5pc1xx/gpio.h +++ b/arch/arm/include/asm/arch-s5pc1xx/gpio.h @@ -143,7 +143,12 @@ static inline unsigned int s5p_gpio_base(int nr) return S5PC110_GPIO_BASE; } -#define s5pc110_gpio_get_nr(bank, pin) \ +static inline unsigned int s5p_gpio_part_max(int nr) +{ + return 0; +} + +#define s5pc110_gpio_get_nr(bank, pin) \ ((((((unsigned int)&(((struct s5pc110_gpio *)S5PC110_GPIO_BASE)->bank))\ - S5PC110_GPIO_BASE) / sizeof(struct s5p_gpio_bank)) \ * GPIO_PER_BANK) + pin) diff --git a/arch/arm/include/asm/arch-tegra20/dc.h b/arch/arm/include/asm/arch-tegra20/dc.h new file mode 100644 index 0000000..37934e1 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/dc.h @@ -0,0 +1,545 @@ +/* + * (C) Copyright 2010 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_TEGRA_DC_H +#define __ASM_ARCH_TEGRA_DC_H + +/* Register definitions for the Tegra display controller */ + +/* CMD register 0x000 ~ 0x43 */ +struct dc_cmd_reg { + /* Address 0x000 ~ 0x002 */ + uint gen_incr_syncpt; /* _CMD_GENERAL_INCR_SYNCPT_0 */ + uint gen_incr_syncpt_ctrl; /* _CMD_GENERAL_INCR_SYNCPT_CNTRL_0 */ + uint gen_incr_syncpt_err; /* _CMD_GENERAL_INCR_SYNCPT_ERROR_0 */ + + uint reserved0[5]; /* reserved_0[5] */ + + /* Address 0x008 ~ 0x00a */ + uint win_a_incr_syncpt; /* _CMD_WIN_A_INCR_SYNCPT_0 */ + uint win_a_incr_syncpt_ctrl; /* _CMD_WIN_A_INCR_SYNCPT_CNTRL_0 */ + uint win_a_incr_syncpt_err; /* _CMD_WIN_A_INCR_SYNCPT_ERROR_0 */ + + uint reserved1[5]; /* reserved_1[5] */ + + /* Address 0x010 ~ 0x012 */ + uint win_b_incr_syncpt; /* _CMD_WIN_B_INCR_SYNCPT_0 */ + uint win_b_incr_syncpt_ctrl; /* _CMD_WIN_B_INCR_SYNCPT_CNTRL_0 */ + uint win_b_incr_syncpt_err; /* _CMD_WIN_B_INCR_SYNCPT_ERROR_0 */ + + uint reserved2[5]; /* reserved_2[5] */ + + /* Address 0x018 ~ 0x01a */ + uint win_c_incr_syncpt; /* _CMD_WIN_C_INCR_SYNCPT_0 */ + uint win_c_incr_syncpt_ctrl; /* _CMD_WIN_C_INCR_SYNCPT_CNTRL_0 */ + uint win_c_incr_syncpt_err; /* _CMD_WIN_C_INCR_SYNCPT_ERROR_0 */ + + uint reserved3[13]; /* reserved_3[13] */ + + /* Address 0x028 */ + uint cont_syncpt_vsync; /* _CMD_CONT_SYNCPT_VSYNC_0 */ + + uint reserved4[7]; /* reserved_4[7] */ + + /* Address 0x030 ~ 0x033 */ + uint ctxsw; /* _CMD_CTXSW_0 */ + uint disp_cmd_opt0; /* _CMD_DISPLAY_COMMAND_OPTION0_0 */ + uint disp_cmd; /* _CMD_DISPLAY_COMMAND_0 */ + uint sig_raise; /* _CMD_SIGNAL_RAISE_0 */ + + uint reserved5[2]; /* reserved_0[2] */ + + /* Address 0x036 ~ 0x03e */ + uint disp_pow_ctrl; /* _CMD_DISPLAY_POWER_CONTROL_0 */ + uint int_stat; /* _CMD_INT_STATUS_0 */ + uint int_mask; /* _CMD_INT_MASK_0 */ + uint int_enb; /* _CMD_INT_ENABLE_0 */ + uint int_type; /* _CMD_INT_TYPE_0 */ + uint int_polarity; /* _CMD_INT_POLARITY_0 */ + uint sig_raise1; /* _CMD_SIGNAL_RAISE1_0 */ + uint sig_raise2; /* _CMD_SIGNAL_RAISE2_0 */ + uint sig_raise3; /* _CMD_SIGNAL_RAISE3_0 */ + + uint reserved6; /* reserved_6 */ + + /* Address 0x040 ~ 0x043 */ + uint state_access; /* _CMD_STATE_ACCESS_0 */ + uint state_ctrl; /* _CMD_STATE_CONTROL_0 */ + uint disp_win_header; /* _CMD_DISPLAY_WINDOW_HEADER_0 */ + uint reg_act_ctrl; /* _CMD_REG_ACT_CONTROL_0 */ +}; + +enum { + PIN_REG_COUNT = 4, + PIN_OUTPUT_SEL_COUNT = 7, +}; + +/* COM register 0x300 ~ 0x329 */ +struct dc_com_reg { + /* Address 0x300 ~ 0x301 */ + uint crc_ctrl; /* _COM_CRC_CONTROL_0 */ + uint crc_checksum; /* _COM_CRC_CHECKSUM_0 */ + + /* _COM_PIN_OUTPUT_ENABLE0/1/2/3_0: Address 0x302 ~ 0x305 */ + uint pin_output_enb[PIN_REG_COUNT]; + + /* _COM_PIN_OUTPUT_POLARITY0/1/2/3_0: Address 0x306 ~ 0x309 */ + uint pin_output_polarity[PIN_REG_COUNT]; + + /* _COM_PIN_OUTPUT_DATA0/1/2/3_0: Address 0x30a ~ 0x30d */ + uint pin_output_data[PIN_REG_COUNT]; + + /* _COM_PIN_INPUT_ENABLE0_0: Address 0x30e ~ 0x311 */ + uint pin_input_enb[PIN_REG_COUNT]; + + /* Address 0x312 ~ 0x313 */ + uint pin_input_data0; /* _COM_PIN_INPUT_DATA0_0 */ + uint pin_input_data1; /* _COM_PIN_INPUT_DATA1_0 */ + + /* _COM_PIN_OUTPUT_SELECT0/1/2/3/4/5/6_0: Address 0x314 ~ 0x31a */ + uint pin_output_sel[PIN_OUTPUT_SEL_COUNT]; + + /* Address 0x31b ~ 0x329 */ + uint pin_misc_ctrl; /* _COM_PIN_MISC_CONTROL_0 */ + uint pm0_ctrl; /* _COM_PM0_CONTROL_0 */ + uint pm0_duty_cycle; /* _COM_PM0_DUTY_CYCLE_0 */ + uint pm1_ctrl; /* _COM_PM1_CONTROL_0 */ + uint pm1_duty_cycle; /* _COM_PM1_DUTY_CYCLE_0 */ + uint spi_ctrl; /* _COM_SPI_CONTROL_0 */ + uint spi_start_byte; /* _COM_SPI_START_BYTE_0 */ + uint hspi_wr_data_ab; /* _COM_HSPI_WRITE_DATA_AB_0 */ + uint hspi_wr_data_cd; /* _COM_HSPI_WRITE_DATA_CD */ + uint hspi_cs_dc; /* _COM_HSPI_CS_DC_0 */ + uint scratch_reg_a; /* _COM_SCRATCH_REGISTER_A_0 */ + uint scratch_reg_b; /* _COM_SCRATCH_REGISTER_B_0 */ + uint gpio_ctrl; /* _COM_GPIO_CTRL_0 */ + uint gpio_debounce_cnt; /* _COM_GPIO_DEBOUNCE_COUNTER_0 */ + uint crc_checksum_latched; /* _COM_CRC_CHECKSUM_LATCHED_0 */ +}; + +enum dc_disp_h_pulse_pos { + H_PULSE0_POSITION_A, + H_PULSE0_POSITION_B, + H_PULSE0_POSITION_C, + H_PULSE0_POSITION_D, + H_PULSE0_POSITION_COUNT, +}; + +struct _disp_h_pulse { + /* _DISP_H_PULSE0/1/2_CONTROL_0 */ + uint h_pulse_ctrl; + /* _DISP_H_PULSE0/1/2_POSITION_A/B/C/D_0 */ + uint h_pulse_pos[H_PULSE0_POSITION_COUNT]; +}; + +enum dc_disp_v_pulse_pos { + V_PULSE0_POSITION_A, + V_PULSE0_POSITION_B, + V_PULSE0_POSITION_C, + V_PULSE0_POSITION_COUNT, +}; + +struct _disp_v_pulse0 { + /* _DISP_H_PULSE0/1_CONTROL_0 */ + uint v_pulse_ctrl; + /* _DISP_H_PULSE0/1_POSITION_A/B/C_0 */ + uint v_pulse_pos[V_PULSE0_POSITION_COUNT]; +}; + +struct _disp_v_pulse2 { + /* _DISP_H_PULSE2/3_CONTROL_0 */ + uint v_pulse_ctrl; + /* _DISP_H_PULSE2/3_POSITION_A_0 */ + uint v_pulse_pos_a; +}; + +enum dc_disp_h_pulse_reg { + H_PULSE0, + H_PULSE1, + H_PULSE2, + H_PULSE_COUNT, +}; + +enum dc_disp_pp_select { + PP_SELECT_A, + PP_SELECT_B, + PP_SELECT_C, + PP_SELECT_D, + PP_SELECT_COUNT, +}; + +/* DISP register 0x400 ~ 0x4c1 */ +struct dc_disp_reg { + /* Address 0x400 ~ 0x40a */ + uint disp_signal_opt0; /* _DISP_DISP_SIGNAL_OPTIONS0_0 */ + uint disp_signal_opt1; /* _DISP_DISP_SIGNAL_OPTIONS1_0 */ + uint disp_win_opt; /* _DISP_DISP_WIN_OPTIONS_0 */ + uint mem_high_pri; /* _DISP_MEM_HIGH_PRIORITY_0 */ + uint mem_high_pri_timer; /* _DISP_MEM_HIGH_PRIORITY_TIMER_0 */ + uint disp_timing_opt; /* _DISP_DISP_TIMING_OPTIONS_0 */ + uint ref_to_sync; /* _DISP_REF_TO_SYNC_0 */ + uint sync_width; /* _DISP_SYNC_WIDTH_0 */ + uint back_porch; /* _DISP_BACK_PORCH_0 */ + uint disp_active; /* _DISP_DISP_ACTIVE_0 */ + uint front_porch; /* _DISP_FRONT_PORCH_0 */ + + /* Address 0x40b ~ 0x419: _DISP_H_PULSE0/1/2_ */ + struct _disp_h_pulse h_pulse[H_PULSE_COUNT]; + + /* Address 0x41a ~ 0x421 */ + struct _disp_v_pulse0 v_pulse0; /* _DISP_V_PULSE0_ */ + struct _disp_v_pulse0 v_pulse1; /* _DISP_V_PULSE1_ */ + + /* Address 0x422 ~ 0x425 */ + struct _disp_v_pulse2 v_pulse3; /* _DISP_V_PULSE2_ */ + struct _disp_v_pulse2 v_pulse4; /* _DISP_V_PULSE3_ */ + + /* Address 0x426 ~ 0x429 */ + uint m0_ctrl; /* _DISP_M0_CONTROL_0 */ + uint m1_ctrl; /* _DISP_M1_CONTROL_0 */ + uint di_ctrl; /* _DISP_DI_CONTROL_0 */ + uint pp_ctrl; /* _DISP_PP_CONTROL_0 */ + + /* Address 0x42a ~ 0x42d: _DISP_PP_SELECT_A/B/C/D_0 */ + uint pp_select[PP_SELECT_COUNT]; + + /* Address 0x42e ~ 0x435 */ + uint disp_clk_ctrl; /* _DISP_DISP_CLOCK_CONTROL_0 */ + uint disp_interface_ctrl; /* _DISP_DISP_INTERFACE_CONTROL_0 */ + uint disp_color_ctrl; /* _DISP_DISP_COLOR_CONTROL_0 */ + uint shift_clk_opt; /* _DISP_SHIFT_CLOCK_OPTIONS_0 */ + uint data_enable_opt; /* _DISP_DATA_ENABLE_OPTIONS_0 */ + uint serial_interface_opt; /* _DISP_SERIAL_INTERFACE_OPTIONS_0 */ + uint lcd_spi_opt; /* _DISP_LCD_SPI_OPTIONS_0 */ + uint border_color; /* _DISP_BORDER_COLOR_0 */ + + /* Address 0x436 ~ 0x439 */ + uint color_key0_lower; /* _DISP_COLOR_KEY0_LOWER_0 */ + uint color_key0_upper; /* _DISP_COLOR_KEY0_UPPER_0 */ + uint color_key1_lower; /* _DISP_COLOR_KEY1_LOWER_0 */ + uint color_key1_upper; /* _DISP_COLOR_KEY1_UPPER_0 */ + + uint reserved0[2]; /* reserved_0[2] */ + + /* Address 0x43c ~ 0x442 */ + uint cursor_foreground; /* _DISP_CURSOR_FOREGROUND_0 */ + uint cursor_background; /* _DISP_CURSOR_BACKGROUND_0 */ + uint cursor_start_addr; /* _DISP_CURSOR_START_ADDR_0 */ + uint cursor_start_addr_ns; /* _DISP_CURSOR_START_ADDR_NS_0 */ + uint cursor_pos; /* _DISP_CURSOR_POSITION_0 */ + uint cursor_pos_ns; /* _DISP_CURSOR_POSITION_NS_0 */ + uint seq_ctrl; /* _DISP_INIT_SEQ_CONTROL_0 */ + + /* Address 0x442 ~ 0x446 */ + uint spi_init_seq_data_a; /* _DISP_SPI_INIT_SEQ_DATA_A_0 */ + uint spi_init_seq_data_b; /* _DISP_SPI_INIT_SEQ_DATA_B_0 */ + uint spi_init_seq_data_c; /* _DISP_SPI_INIT_SEQ_DATA_C_0 */ + uint spi_init_seq_data_d; /* _DISP_SPI_INIT_SEQ_DATA_D_0 */ + + uint reserved1[0x39]; /* reserved1[0x39], */ + + /* Address 0x480 ~ 0x484 */ + uint dc_mccif_fifoctrl; /* _DISP_DC_MCCIF_FIFOCTRL_0 */ + uint mccif_disp0a_hyst; /* _DISP_MCCIF_DISPLAY0A_HYST_0 */ + uint mccif_disp0b_hyst; /* _DISP_MCCIF_DISPLAY0B_HYST_0 */ + uint mccif_disp0c_hyst; /* _DISP_MCCIF_DISPLAY0C_HYST_0 */ + uint mccif_disp1b_hyst; /* _DISP_MCCIF_DISPLAY1B_HYST_0 */ + + uint reserved2[0x3b]; /* reserved2[0x3b] */ + + /* Address 0x4c0 ~ 0x4c1 */ + uint dac_crt_ctrl; /* _DISP_DAC_CRT_CTRL_0 */ + uint disp_misc_ctrl; /* _DISP_DISP_MISC_CONTROL_0 */ +}; + +enum dc_winc_filter_p { + WINC_FILTER_COUNT = 0x10, +}; + +/* Window A/B/C register 0x500 ~ 0x628 */ +struct dc_winc_reg { + + /* Address 0x500 */ + uint color_palette; /* _WINC_COLOR_PALETTE_0 */ + + uint reserved0[0xff]; /* reserved_0[0xff] */ + + /* Address 0x600 */ + uint palette_color_ext; /* _WINC_PALETTE_COLOR_EXT_0 */ + + /* _WINC_H_FILTER_P00~0F_0 */ + /* Address 0x601 ~ 0x610 */ + uint h_filter_p[WINC_FILTER_COUNT]; + + /* Address 0x611 ~ 0x618 */ + uint csc_yof; /* _WINC_CSC_YOF_0 */ + uint csc_kyrgb; /* _WINC_CSC_KYRGB_0 */ + uint csc_kur; /* _WINC_CSC_KUR_0 */ + uint csc_kvr; /* _WINC_CSC_KVR_0 */ + uint csc_kug; /* _WINC_CSC_KUG_0 */ + uint csc_kvg; /* _WINC_CSC_KVG_0 */ + uint csc_kub; /* _WINC_CSC_KUB_0 */ + uint csc_kvb; /* _WINC_CSC_KVB_0 */ + + /* Address 0x619 ~ 0x628: _WINC_V_FILTER_P00~0F_0 */ + uint v_filter_p[WINC_FILTER_COUNT]; +}; + +/* WIN A/B/C Register 0x700 ~ 0x714*/ +struct dc_win_reg { + /* Address 0x700 ~ 0x714 */ + uint win_opt; /* _WIN_WIN_OPTIONS_0 */ + uint byte_swap; /* _WIN_BYTE_SWAP_0 */ + uint buffer_ctrl; /* _WIN_BUFFER_CONTROL_0 */ + uint color_depth; /* _WIN_COLOR_DEPTH_0 */ + uint pos; /* _WIN_POSITION_0 */ + uint size; /* _WIN_SIZE_0 */ + uint prescaled_size; /* _WIN_PRESCALED_SIZE_0 */ + uint h_initial_dda; /* _WIN_H_INITIAL_DDA_0 */ + uint v_initial_dda; /* _WIN_V_INITIAL_DDA_0 */ + uint dda_increment; /* _WIN_DDA_INCREMENT_0 */ + uint line_stride; /* _WIN_LINE_STRIDE_0 */ + uint buf_stride; /* _WIN_BUF_STRIDE_0 */ + uint uv_buf_stride; /* _WIN_UV_BUF_STRIDE_0 */ + uint buffer_addr_mode; /* _WIN_BUFFER_ADDR_MODE_0 */ + uint dv_ctrl; /* _WIN_DV_CONTROL_0 */ + uint blend_nokey; /* _WIN_BLEND_NOKEY_0 */ + uint blend_1win; /* _WIN_BLEND_1WIN_0 */ + uint blend_2win_x; /* _WIN_BLEND_2WIN_X_0 */ + uint blend_2win_y; /* _WIN_BLEND_2WIN_Y_0 */ + uint blend_3win_xy; /* _WIN_BLEND_3WIN_XY_0 */ + uint hp_fetch_ctrl; /* _WIN_HP_FETCH_CONTROL_0 */ +}; + +/* WINBUF A/B/C Register 0x800 ~ 0x80a */ +struct dc_winbuf_reg { + /* Address 0x800 ~ 0x80a */ + uint start_addr; /* _WINBUF_START_ADDR_0 */ + uint start_addr_ns; /* _WINBUF_START_ADDR_NS_0 */ + uint start_addr_u; /* _WINBUF_START_ADDR_U_0 */ + uint start_addr_u_ns; /* _WINBUF_START_ADDR_U_NS_0 */ + uint start_addr_v; /* _WINBUF_START_ADDR_V_0 */ + uint start_addr_v_ns; /* _WINBUF_START_ADDR_V_NS_0 */ + uint addr_h_offset; /* _WINBUF_ADDR_H_OFFSET_0 */ + uint addr_h_offset_ns; /* _WINBUF_ADDR_H_OFFSET_NS_0 */ + uint addr_v_offset; /* _WINBUF_ADDR_V_OFFSET_0 */ + uint addr_v_offset_ns; /* _WINBUF_ADDR_V_OFFSET_NS_0 */ + uint uflow_status; /* _WINBUF_UFLOW_STATUS_0 */ +}; + +/* Display Controller (DC_) regs */ +struct dc_ctlr { + struct dc_cmd_reg cmd; /* CMD register 0x000 ~ 0x43 */ + uint reserved0[0x2bc]; + + struct dc_com_reg com; /* COM register 0x300 ~ 0x329 */ + uint reserved1[0xd6]; + + struct dc_disp_reg disp; /* DISP register 0x400 ~ 0x4c1 */ + uint reserved2[0x3e]; + + struct dc_winc_reg winc; /* Window A/B/C 0x500 ~ 0x628 */ + uint reserved3[0xd7]; + + struct dc_win_reg win; /* WIN A/B/C 0x700 ~ 0x714*/ + uint reserved4[0xeb]; + + struct dc_winbuf_reg winbuf; /* WINBUF A/B/C 0x800 ~ 0x80a */ +}; + +#define BIT(pos) (1U << pos) + +/* DC_CMD_DISPLAY_COMMAND 0x032 */ +#define CTRL_MODE_SHIFT 5 +#define CTRL_MODE_MASK (0x3 << CTRL_MODE_SHIFT) +enum { + CTRL_MODE_STOP, + CTRL_MODE_C_DISPLAY, + CTRL_MODE_NC_DISPLAY, +}; + +/* _WIN_COLOR_DEPTH_0 */ +enum win_color_depth_id { + COLOR_DEPTH_P1, + COLOR_DEPTH_P2, + COLOR_DEPTH_P4, + COLOR_DEPTH_P8, + COLOR_DEPTH_B4G4R4A4, + COLOR_DEPTH_B5G5R5A, + COLOR_DEPTH_B5G6R5, + COLOR_DEPTH_AB5G5R5, + COLOR_DEPTH_B8G8R8A8 = 12, + COLOR_DEPTH_R8G8B8A8, + COLOR_DEPTH_B6x2G6x2R6x2A8, + COLOR_DEPTH_R6x2G6x2B6x2A8, + COLOR_DEPTH_YCbCr422, + COLOR_DEPTH_YUV422, + COLOR_DEPTH_YCbCr420P, + COLOR_DEPTH_YUV420P, + COLOR_DEPTH_YCbCr422P, + COLOR_DEPTH_YUV422P, + COLOR_DEPTH_YCbCr422R, + COLOR_DEPTH_YUV422R, + COLOR_DEPTH_YCbCr422RA, + COLOR_DEPTH_YUV422RA, +}; + +/* DC_CMD_DISPLAY_POWER_CONTROL 0x036 */ +#define PW0_ENABLE BIT(0) +#define PW1_ENABLE BIT(2) +#define PW2_ENABLE BIT(4) +#define PW3_ENABLE BIT(6) +#define PW4_ENABLE BIT(8) +#define PM0_ENABLE BIT(16) +#define PM1_ENABLE BIT(18) +#define SPI_ENABLE BIT(24) +#define HSPI_ENABLE BIT(25) + +/* DC_CMD_STATE_CONTROL 0x041 */ +#define GENERAL_ACT_REQ BIT(0) +#define WIN_A_ACT_REQ BIT(1) +#define WIN_B_ACT_REQ BIT(2) +#define WIN_C_ACT_REQ BIT(3) +#define GENERAL_UPDATE BIT(8) +#define WIN_A_UPDATE BIT(9) +#define WIN_B_UPDATE BIT(10) +#define WIN_C_UPDATE BIT(11) + +/* DC_CMD_DISPLAY_WINDOW_HEADER 0x042 */ +#define WINDOW_A_SELECT BIT(4) +#define WINDOW_B_SELECT BIT(5) +#define WINDOW_C_SELECT BIT(6) + +/* DC_DISP_DISP_CLOCK_CONTROL 0x42e */ +#define SHIFT_CLK_DIVIDER_SHIFT 0 +#define SHIFT_CLK_DIVIDER_MASK (0xff << SHIFT_CLK_DIVIDER_SHIFT) +#define PIXEL_CLK_DIVIDER_SHIFT 8 +#define PIXEL_CLK_DIVIDER_MSK (0xf << PIXEL_CLK_DIVIDER_SHIFT) +enum { + PIXEL_CLK_DIVIDER_PCD1, + PIXEL_CLK_DIVIDER_PCD1H, + PIXEL_CLK_DIVIDER_PCD2, + PIXEL_CLK_DIVIDER_PCD3, + PIXEL_CLK_DIVIDER_PCD4, + PIXEL_CLK_DIVIDER_PCD6, + PIXEL_CLK_DIVIDER_PCD8, + PIXEL_CLK_DIVIDER_PCD9, + PIXEL_CLK_DIVIDER_PCD12, + PIXEL_CLK_DIVIDER_PCD16, + PIXEL_CLK_DIVIDER_PCD18, + PIXEL_CLK_DIVIDER_PCD24, + PIXEL_CLK_DIVIDER_PCD13, +}; + +/* DC_DISP_DISP_INTERFACE_CONTROL 0x42f */ +#define DATA_FORMAT_SHIFT 0 +#define DATA_FORMAT_MASK (0xf << DATA_FORMAT_SHIFT) +enum { + DATA_FORMAT_DF1P1C, + DATA_FORMAT_DF1P2C24B, + DATA_FORMAT_DF1P2C18B, + DATA_FORMAT_DF1P2C16B, + DATA_FORMAT_DF2S, + DATA_FORMAT_DF3S, + DATA_FORMAT_DFSPI, + DATA_FORMAT_DF1P3C24B, + DATA_FORMAT_DF1P3C18B, +}; +#define DATA_ALIGNMENT_SHIFT 8 +enum { + DATA_ALIGNMENT_MSB, + DATA_ALIGNMENT_LSB, +}; +#define DATA_ORDER_SHIFT 9 +enum { + DATA_ORDER_RED_BLUE, + DATA_ORDER_BLUE_RED, +}; + +/* DC_DISP_DATA_ENABLE_OPTIONS 0x432 */ +#define DE_SELECT_SHIFT 0 +#define DE_SELECT_MASK (0x3 << DE_SELECT_SHIFT) +#define DE_SELECT_ACTIVE_BLANK 0x0 +#define DE_SELECT_ACTIVE 0x1 +#define DE_SELECT_ACTIVE_IS 0x2 +#define DE_CONTROL_SHIFT 2 +#define DE_CONTROL_MASK (0x7 << DE_CONTROL_SHIFT) +enum { + DE_CONTROL_ONECLK, + DE_CONTROL_NORMAL, + DE_CONTROL_EARLY_EXT, + DE_CONTROL_EARLY, + DE_CONTROL_ACTIVE_BLANK, +}; + +/* DC_WIN_WIN_OPTIONS 0x700 */ +#define H_DIRECTION BIT(0) +enum { + H_DIRECTION_INCREMENT, + H_DIRECTION_DECREMENT, +}; +#define V_DIRECTION BIT(2) +enum { + V_DIRECTION_INCREMENT, + V_DIRECTION_DECREMENT, +}; +#define COLOR_EXPAND BIT(6) +#define CP_ENABLE BIT(16) +#define DV_ENABLE BIT(20) +#define WIN_ENABLE BIT(30) + +/* DC_WIN_BYTE_SWAP 0x701 */ +#define BYTE_SWAP_SHIFT 0 +#define BYTE_SWAP_MASK (3 << BYTE_SWAP_SHIFT) +enum { + BYTE_SWAP_NOSWAP, + BYTE_SWAP_SWAP2, + BYTE_SWAP_SWAP4, + BYTE_SWAP_SWAP4HW +}; + +/* DC_WIN_POSITION 0x704 */ +#define H_POSITION_SHIFT 0 +#define H_POSITION_MASK (0x1FFF << H_POSITION_SHIFT) +#define V_POSITION_SHIFT 16 +#define V_POSITION_MASK (0x1FFF << V_POSITION_SHIFT) + +/* DC_WIN_SIZE 0x705 */ +#define H_SIZE_SHIFT 0 +#define H_SIZE_MASK (0x1FFF << H_SIZE_SHIFT) +#define V_SIZE_SHIFT 16 +#define V_SIZE_MASK (0x1FFF << V_SIZE_SHIFT) + +/* DC_WIN_PRESCALED_SIZE 0x706 */ +#define H_PRESCALED_SIZE_SHIFT 0 +#define H_PRESCALED_SIZE_MASK (0x7FFF << H_PRESCALED_SIZE) +#define V_PRESCALED_SIZE_SHIFT 16 +#define V_PRESCALED_SIZE_MASK (0x1FFF << V_PRESCALED_SIZE) + +/* DC_WIN_DDA_INCREMENT 0x709 */ +#define H_DDA_INC_SHIFT 0 +#define H_DDA_INC_MASK (0xFFFF << H_DDA_INC_SHIFT) +#define V_DDA_INC_SHIFT 16 +#define V_DDA_INC_MASK (0xFFFF << V_DDA_INC_SHIFT) + +#endif /* __ASM_ARCH_TEGRA_DC_H */ diff --git a/arch/arm/include/asm/arch-tegra20/display.h b/arch/arm/include/asm/arch-tegra20/display.h new file mode 100644 index 0000000..c870959 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/display.h @@ -0,0 +1,152 @@ +/* + * (C) Copyright 2010 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_TEGRA_DISPLAY_H +#define __ASM_ARCH_TEGRA_DISPLAY_H + +#include <asm/arch/dc.h> +#include <fdtdec.h> + +/* This holds information about a window which can be displayed */ +struct disp_ctl_win { + enum win_color_depth_id fmt; /* Color depth/format */ + unsigned bpp; /* Bits per pixel */ + phys_addr_t phys_addr; /* Physical address in memory */ + unsigned x; /* Horizontal address offset (bytes) */ + unsigned y; /* Veritical address offset (bytes) */ + unsigned w; /* Width of source window */ + unsigned h; /* Height of source window */ + unsigned stride; /* Number of bytes per line */ + unsigned out_x; /* Left edge of output window (col) */ + unsigned out_y; /* Top edge of output window (row) */ + unsigned out_w; /* Width of output window in pixels */ + unsigned out_h; /* Height of output window in pixels */ +}; + +#define FDT_LCD_TIMINGS 4 + +enum { + FDT_LCD_TIMING_REF_TO_SYNC, + FDT_LCD_TIMING_SYNC_WIDTH, + FDT_LCD_TIMING_BACK_PORCH, + FDT_LCD_TIMING_FRONT_PORCH, + + FDT_LCD_TIMING_COUNT, +}; + +enum lcd_cache_t { + FDT_LCD_CACHE_OFF = 0, + FDT_LCD_CACHE_WRITE_THROUGH = 1 << 0, + FDT_LCD_CACHE_WRITE_BACK = 1 << 1, + FDT_LCD_CACHE_FLUSH = 1 << 2, + FDT_LCD_CACHE_WRITE_BACK_FLUSH = FDT_LCD_CACHE_WRITE_BACK | + FDT_LCD_CACHE_FLUSH, +}; + +/* Information about the display controller */ +struct fdt_disp_config { + int valid; /* config is valid */ + int width; /* width in pixels */ + int height; /* height in pixels */ + int bpp; /* number of bits per pixel */ + + /* + * log2 of number of bpp, in general, unless it bpp is 24 in which + * case this field holds 24 also! This is a U-Boot thing. + */ + int log2_bpp; + struct disp_ctlr *disp; /* Display controller to use */ + fdt_addr_t frame_buffer; /* Address of frame buffer */ + unsigned pixel_clock; /* Pixel clock in Hz */ + uint horiz_timing[FDT_LCD_TIMING_COUNT]; /* Horizontal timing */ + uint vert_timing[FDT_LCD_TIMING_COUNT]; /* Vertical timing */ + int panel_node; /* node offset of panel information */ +}; + +/* Information about the LCD panel */ +struct fdt_panel_config { + int pwm_channel; /* PWM channel to use for backlight */ + enum lcd_cache_t cache_type; + + struct fdt_gpio_state backlight_en; /* GPIO for backlight enable */ + struct fdt_gpio_state lvds_shutdown; /* GPIO for lvds shutdown */ + struct fdt_gpio_state backlight_vdd; /* GPIO for backlight vdd */ + struct fdt_gpio_state panel_vdd; /* GPIO for panel vdd */ + /* + * Panel required timings + * Timing 1: delay between panel_vdd-rise and data-rise + * Timing 2: delay between data-rise and backlight_vdd-rise + * Timing 3: delay between backlight_vdd and pwm-rise + * Timing 4: delay between pwm-rise and backlight_en-rise + */ + uint panel_timings[FDT_LCD_TIMINGS]; +}; + +/** + * Register a new display based on device tree configuration. + * + * The frame buffer can be positioned by U-Boot or overriden by the fdt. + * You should pass in the U-Boot address here, and check the contents of + * struct fdt_disp_config to see what was actually chosen. + * + * @param blob Device tree blob + * @param default_lcd_base Default address of LCD frame buffer + * @return 0 if ok, -1 on error (unsupported bits per pixel) + */ +int tegra_display_probe(const void *blob, void *default_lcd_base); + +/** + * Return the current display configuration + * + * @return pointer to display configuration, or NULL if there is no valid + * config + */ +struct fdt_disp_config *tegra_display_get_config(void); + +/** + * Perform the next stage of the LCD init if it is time to do so. + * + * LCD init can be time-consuming because of the number of delays we need + * while waiting for the backlight power supply, etc. This function can + * be called at various times during U-Boot operation to advance the + * initialization of the LCD to the next stage if sufficient time has + * passed since the last stage. It keeps track of what stage it is up to + * and the time that it is permitted to move to the next stage. + * + * The final call should have wait=1 to complete the init. + * + * @param blob fdt blob containing LCD information + * @param wait 1 to wait until all init is complete, and then return + * 0 to return immediately, potentially doing nothing if it is + * not yet time for the next init. + */ +int tegra_lcd_check_next_stage(const void *blob, int wait); + +/** + * Set up the maximum LCD size so we can size the frame buffer. + * + * @param blob fdt blob containing LCD information + */ +void tegra_lcd_early_init(const void *blob); + +#endif /*__ASM_ARCH_TEGRA_DISPLAY_H*/ diff --git a/arch/arm/include/asm/arch-tegra20/pinmux.h b/arch/arm/include/asm/arch-tegra20/pinmux.h index 03fa7ca..797e158 100644 --- a/arch/arm/include/asm/arch-tegra20/pinmux.h +++ b/arch/arm/include/asm/arch-tegra20/pinmux.h @@ -339,7 +339,7 @@ void pinmux_set_pullupdown(enum pmux_pingrp pin, enum pmux_pull pupd); void pinmux_set_func(enum pmux_pingrp pin, enum pmux_func func); /* Set the complete configuration for a pin group */ -void pinmux_config_pingroup(struct pingroup_config *config); +void pinmux_config_pingroup(const struct pingroup_config *config); void pinmux_set_tristate(enum pmux_pingrp pin, int enable); @@ -349,6 +349,6 @@ void pinmux_set_tristate(enum pmux_pingrp pin, int enable); * @param config List of config items * @param len Number of config items in list */ -void pinmux_config_table(struct pingroup_config *config, int len); +void pinmux_config_table(const struct pingroup_config *config, int len); #endif /* PINMUX_H */ diff --git a/arch/arm/include/asm/arch-tegra20/pwm.h b/arch/arm/include/asm/arch-tegra20/pwm.h new file mode 100644 index 0000000..9e03837 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra20/pwm.h @@ -0,0 +1,75 @@ +/* + * Tegra pulse width frequency modulator definitions + * + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ASM_ARCH_TEGRA_PWM_H +#define __ASM_ARCH_TEGRA_PWM_H + +/* This is a single PWM channel */ +struct pwm_ctlr { + uint control; /* Control register */ + uint reserved[3]; /* Space space */ +}; + +#define PWM_NUM_CHANNELS 4 + +/* PWM_CONTROLLER_PWM_CSR_0/1/2/3_0 */ +#define PWM_ENABLE_SHIFT 31 +#define PWM_ENABLE_MASK (0x1 << PWM_ENABLE_SHIFT) + +#define PWM_WIDTH_SHIFT 16 +#define PWM_WIDTH_MASK (0x7FFF << PWM_WIDTH_SHIFT) + +#define PWM_DIVIDER_SHIFT 0 +#define PWM_DIVIDER_MASK (0x1FFF << PWM_DIVIDER_SHIFT) + +/** + * Program the PWM with the given parameters. + * + * @param channel PWM channel to update + * @param rate Clock rate to use for PWM + * @param pulse_width high pulse width: 0=always low, 1=1/256 pulse high, + * n = n/256 pulse high + * @param freq_divider frequency divider value (1 to use rate as is) + */ +void pwm_enable(unsigned channel, int rate, int pulse_width, int freq_divider); + +/** + * Request a pwm channel as referenced by a device tree node. + * + * This channel can then be passed to pwm_enable(). + * + * @param blob Device tree blob + * @param node Node containing reference to pwm + * @param prop_name Property name of pwm reference + * @return channel number, if ok, else -1 + */ +int pwm_request(const void *blob, int node, const char *prop_name); + +/** + * Set up the pwm controller, by looking it up in the fdt. + * + * @return 0 if ok, -1 if the device tree node was not found or invalid. + */ +int pwm_init(const void *blob); + +#endif /* __ASM_ARCH_TEGRA_PWM_H */ diff --git a/arch/arm/include/asm/omap_gpio.h b/arch/arm/include/asm/omap_gpio.h index 516cc42..1ebfa86 100644 --- a/arch/arm/include/asm/omap_gpio.h +++ b/arch/arm/include/asm/omap_gpio.h @@ -49,4 +49,11 @@ extern const struct gpio_bank *const omap_gpio_bank; #define METHOD_GPIO_24XX 4 +/** + * Check if gpio is valid. + * + * @param gpio GPIO number + * @return 1 if ok, 0 on error + */ +int gpio_is_valid(int gpio); #endif /* _GPIO_H_ */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 2b28a26..78ca8e0 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -75,6 +75,37 @@ static inline void set_cr(unsigned int val) isb(); } +/* options available for data cache on each page */ +enum dcache_option { + DCACHE_OFF = 0x12, + DCACHE_WRITETHROUGH = 0x1a, + DCACHE_WRITEBACK = 0x1e, +}; + +/* Size of an MMU section */ +enum { + MMU_SECTION_SHIFT = 20, + MMU_SECTION_SIZE = 1 << MMU_SECTION_SHIFT, +}; + +/** + * Change the cache settings for a region. + * + * \param start start address of memory region to change + * \param size size of memory region to change + * \param option dcache option to select + */ +void mmu_set_region_dcache_behaviour(u32 start, int size, + enum dcache_option option); + +/** + * Register an update to the page tables, and flush the TLB + * + * \param start start address of update in page table + * \param stop stop address of update in page table + */ +void mmu_page_table_flush(unsigned long start, unsigned long stop); + #endif /* __ASSEMBLY__ */ #define arch_align_stack(x) (x) diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c index 22a4d9c..e0cb635 100644 --- a/arch/arm/lib/board.c +++ b/arch/arm/lib/board.c @@ -540,15 +540,13 @@ void board_init_r(gd_t *id, ulong dest_addr) flash_size = flash_init(); if (flash_size > 0) { # ifdef CONFIG_SYS_FLASH_CHECKSUM - char *s = getenv("flashchecksum"); - print_size(flash_size, ""); /* * Compute and print flash CRC if flashchecksum is set to 'y' * * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX */ - if (s && (*s == 'y')) { + if (getenv_yesno("flashchecksum") == 1) { printf(" CRC: %08X", crc32(0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, flash_size)); diff --git a/arch/arm/lib/cache-cp15.c b/arch/arm/lib/cache-cp15.c index 939de10..6edf815 100644 --- a/arch/arm/lib/cache-cp15.c +++ b/arch/arm/lib/cache-cp15.c @@ -26,12 +26,6 @@ #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF)) -#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) -#define CACHE_SETUP 0x1a -#else -#define CACHE_SETUP 0x1e -#endif - DECLARE_GLOBAL_DATA_PTR; void __arm_init_before_mmu(void) @@ -50,9 +44,41 @@ static void cp_delay (void) asm volatile("" : : : "memory"); } -static inline void dram_bank_mmu_setup(int bank) +void set_section_dcache(int section, enum dcache_option option) { u32 *page_table = (u32 *)gd->tlb_addr; + u32 value; + + value = (section << MMU_SECTION_SHIFT) | (3 << 10); + value |= option; + page_table[section] = value; +} + +void __mmu_page_table_flush(unsigned long start, unsigned long stop) +{ + debug("%s: Warning: not implemented\n", __func__); +} + +void mmu_page_table_flush(unsigned long start, unsigned long stop) + __attribute__((weak, alias("__mmu_page_table_flush"))); + +void mmu_set_region_dcache_behaviour(u32 start, int size, + enum dcache_option option) +{ + u32 *page_table = (u32 *)gd->tlb_addr; + u32 upto, end; + + end = ALIGN(start + size, MMU_SECTION_SIZE) >> MMU_SECTION_SHIFT; + start = start >> MMU_SECTION_SHIFT; + debug("%s: start=%x, size=%x, option=%d\n", __func__, start, size, + option); + for (upto = start; upto < end; upto++) + set_section_dcache(upto, option); + mmu_page_table_flush((u32)&page_table[start], (u32)&page_table[end]); +} + +static inline void dram_bank_mmu_setup(int bank) +{ bd_t *bd = gd->bd; int i; @@ -60,21 +86,24 @@ static inline void dram_bank_mmu_setup(int bank) for (i = bd->bi_dram[bank].start >> 20; i < (bd->bi_dram[bank].start + bd->bi_dram[bank].size) >> 20; i++) { - page_table[i] = i << 20 | (3 << 10) | CACHE_SETUP; +#if defined(CONFIG_SYS_ARM_CACHE_WRITETHROUGH) + set_section_dcache(i, DCACHE_WRITETHROUGH); +#else + set_section_dcache(i, DCACHE_WRITEBACK); +#endif } } /* to activate the MMU we need to set up virtual memory: use 1M areas */ static inline void mmu_setup(void) { - u32 *page_table = (u32 *)gd->tlb_addr; int i; u32 reg; arm_init_before_mmu(); /* Set up an identity-mapping for all 4GB, rw for everyone */ for (i = 0; i < 4096; i++) - page_table[i] = i << 20 | (3 << 10) | 0x12; + set_section_dcache(i, DCACHE_OFF); for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { dram_bank_mmu_setup(i); @@ -82,7 +111,7 @@ static inline void mmu_setup(void) /* Copy the page table address to cp15 */ asm volatile("mcr p15, 0, %0, c2, c0, 0" - : : "r" (page_table) : "memory"); + : : "r" (gd->tlb_addr) : "memory"); /* Set the access control to all-supervisor */ asm volatile("mcr p15, 0, %0, c3, c0, 0" : : "r" (~0)); diff --git a/arch/m68k/include/asm/string.h b/arch/m68k/include/asm/string.h index e0773a8..ecf5e56 100644 --- a/arch/m68k/include/asm/string.h +++ b/arch/m68k/include/asm/string.h @@ -16,7 +16,7 @@ #endif extern int strcasecmp(const char *, const char *); -extern int strncasecmp(const char *, const char *, int); +extern int strncasecmp(const char *, const char *, __kernel_size_t); extern char * strcpy(char *,const char *); extern char * strncpy(char *,const char *, __kernel_size_t); extern __kernel_size_t strlen(const char *); diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c index 02d73fd..794b867 100644 --- a/arch/m68k/lib/board.c +++ b/arch/m68k/lib/board.c @@ -462,8 +462,7 @@ void board_init_r (gd_t *id, ulong dest_addr) * * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX */ - s = getenv ("flashchecksum"); - if (s && (*s == 'y')) { + if (getenv_yesno("flashchecksum") == 1) { printf (" CRC: %08X", crc32 (0, (const unsigned char *) CONFIG_SYS_FLASH_BASE, diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c index efd63cd..a7c2f76 100644 --- a/arch/microblaze/lib/board.c +++ b/arch/microblaze/lib/board.c @@ -74,7 +74,6 @@ void board_init_f(ulong not_used) gd = (gd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET); bd = (bd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \ - GENERATED_BD_INFO_SIZE); - __maybe_unused char *s; #if defined(CONFIG_CMD_FLASH) ulong flash_size = 0; #endif @@ -143,8 +142,7 @@ void board_init_f(ulong not_used) * * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX */ - s = getenv ("flashchecksum"); - if (s && (*s == 'y')) { + if (getenv_yesno("flashchecksum") == 1) { printf (" CRC: %08X", crc32(0, (const u8 *)bd->bi_flashstart, flash_size) diff --git a/arch/mips/cpu/mips64/start.S b/arch/mips/cpu/mips64/start.S index 4112de7..2b8d531 100644 --- a/arch/mips/cpu/mips64/start.S +++ b/arch/mips/cpu/mips64/start.S @@ -108,7 +108,12 @@ reset: mtc0 t0, CP0_CONFIG #endif - /* Initialize $gp */ + /* + * Initialize $gp, force 8 byte alignment of bal instruction to forbid + * the compiler to put nop's between bal and _gp. This is required to + * keep _gp and ra aligned to 8 byte. + */ + .align 3 bal 1f nop .dword _gp diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index 1c8f4c0..f2dc533 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -566,7 +566,7 @@ static __inline__ int __test_and_change_bit(int nr, volatile void * addr) * @nr: bit number to test * @addr: Address to start counting from */ -static __inline__ int test_bit(int nr, volatile void *addr) +static __inline__ int test_bit(int nr, const volatile void *addr) { return ((1UL << (nr & 31)) & (((const unsigned int *) addr)[nr >> 5])) != 0; } diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c index 7ddd778..d79e183 100644 --- a/arch/mips/lib/board.c +++ b/arch/mips/lib/board.c @@ -24,6 +24,7 @@ #include <common.h> #include <command.h> #include <malloc.h> +#include <serial.h> #include <stdio_dev.h> #include <version.h> #include <net.h> @@ -46,7 +47,7 @@ static char *failed = "*** failed ***\n"; * mips_io_port_base is the begin of the address space to which x86 style * I/O ports are mapped. */ -unsigned long mips_io_port_base = -1; +const unsigned long mips_io_port_base = -1; int __board_early_init_f(void) { @@ -262,6 +263,8 @@ void board_init_r(gd_t *id, ulong dest_addr) monitor_flash_len = (ulong)&uboot_end_data - dest_addr; + serial_initialize(); + #if defined(CONFIG_NEEDS_MANUAL_RELOC) /* * We have to relocate the command table manually diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c index e1197ac..43d4836 100644 --- a/arch/powerpc/cpu/mpc85xx/mp.c +++ b/arch/powerpc/cpu/mpc85xx/mp.c @@ -46,10 +46,8 @@ u32 get_my_id() */ int hold_cores_in_reset(int verbose) { - const char *s = getenv("mp_holdoff"); - /* Default to no, overriden by 'y', 'yes', 'Y', 'Yes', or '1' */ - if (s && (*s == 'y' || *s == 'Y' || *s == '1')) { + if (getenv_yesno("mp_holdoff") == 1) { if (verbose) { puts("Secondary cores are being held in reset.\n"); puts("See 'mp_holdoff' environment variable\n"); diff --git a/arch/powerpc/include/asm/string.h b/arch/powerpc/include/asm/string.h index d912a6b..036805e 100644 --- a/arch/powerpc/include/asm/string.h +++ b/arch/powerpc/include/asm/string.h @@ -14,7 +14,7 @@ #define __HAVE_ARCH_MEMCHR extern int strcasecmp(const char *, const char *); -extern int strncasecmp(const char *, const char *, int); +extern int strncasecmp(const char *, const char *, __kernel_size_t); extern char * strcpy(char *,const char *); extern char * strncpy(char *,const char *, __kernel_size_t); extern __kernel_size_t strlen(const char *); diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c index 1b051e1..6a7bf4b 100644 --- a/arch/powerpc/lib/board.c +++ b/arch/powerpc/lib/board.c @@ -739,16 +739,13 @@ void board_init_r(gd_t *id, ulong dest_addr) flash_size = 0; } else if ((flash_size = flash_init()) > 0) { #ifdef CONFIG_SYS_FLASH_CHECKSUM - char *s; - print_size(flash_size, ""); /* * Compute and print flash CRC if flashchecksum is set to 'y' * * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX */ - s = getenv("flashchecksum"); - if (s && (*s == 'y')) { + if (getenv_yesno("flashchecksum") == 1) { printf(" CRC: %08X", crc32(0, (const unsigned char *) @@ -841,9 +838,7 @@ void board_init_r(gd_t *id, ulong dest_addr) * "i2cfast" into account */ { - char *s = getenv("i2cfast"); - - if (s && ((*s == 'y') || (*s == 'Y'))) { + if (getenv_yesno("i2cfast") == 1) { bd->bi_iic_fast[0] = 1; bd->bi_iic_fast[1] = 1; } diff --git a/arch/sparc/include/asm/string.h b/arch/sparc/include/asm/string.h index c6bbc20..af6faea 100644 --- a/arch/sparc/include/asm/string.h +++ b/arch/sparc/include/asm/string.h @@ -40,7 +40,7 @@ */ extern int strcasecmp(const char *, const char *); -extern int strncasecmp(const char *, const char *, int); +extern int strncasecmp(const char *, const char *, __kernel_size_t); extern char *strcpy(char *, const char *); extern char *strncpy(char *, const char *, __kernel_size_t); extern __kernel_size_t strlen(const char *); diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c index 32d025a..1b5e995 100644 --- a/arch/sparc/lib/board.c +++ b/arch/sparc/lib/board.c @@ -284,8 +284,7 @@ void board_init_f(ulong bootflag) * * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX */ - s = getenv("flashchecksum"); - if (s && (*s == 'y')) { + if (getenv_yesno("flashchecksum") == 1) { printf(" CRC: %08lX", crc32(0, (const unsigned char *)CONFIG_SYS_FLASH_BASE, flash_size) diff --git a/board/Marvell/db64360/db64360.c b/board/Marvell/db64360/db64360.c index 6cae686..38769e0 100644 --- a/board/Marvell/db64360/db64360.c +++ b/board/Marvell/db64360/db64360.c @@ -834,15 +834,11 @@ int mem_test_walk (void) /*********************************************************************/ int testdram (void) { - char *s; int rundata, runaddress, runwalk; - s = getenv ("testdramdata"); - rundata = (s && (*s == 'y')) ? 1 : 0; - s = getenv ("testdramaddress"); - runaddress = (s && (*s == 'y')) ? 1 : 0; - s = getenv ("testdramwalk"); - runwalk = (s && (*s == 'y')) ? 1 : 0; + rundata = getenv_yesno("testdramdata") == 1; + runaddress = getenv_yesno("testdramaddress") == 1; + runwalk = getenv_yesno("testdramwalk") == 1; /* rundata = 1; */ /* runaddress = 0; */ diff --git a/board/Marvell/db64460/db64460.c b/board/Marvell/db64460/db64460.c index d4f58b3..ddb7ed5 100644 --- a/board/Marvell/db64460/db64460.c +++ b/board/Marvell/db64460/db64460.c @@ -834,15 +834,11 @@ int mem_test_walk (void) /*********************************************************************/ int testdram (void) { - char *s; int rundata, runaddress, runwalk; - s = getenv ("testdramdata"); - rundata = (s && (*s == 'y')) ? 1 : 0; - s = getenv ("testdramaddress"); - runaddress = (s && (*s == 'y')) ? 1 : 0; - s = getenv ("testdramwalk"); - runwalk = (s && (*s == 'y')) ? 1 : 0; + rundata = getenv_yesno("testdramdata") == 1; + runaddress = getenv_yesno("testdramaddress") == 1; + runwalk = getenv_yesno("testdramwalk") == 1; /* rundata = 1; */ /* runaddress = 0; */ diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c index 0725989..6492d41 100644 --- a/board/compal/paz00/paz00.c +++ b/board/compal/paz00/paz00.c @@ -61,9 +61,8 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); debug("board_mmc_init: init eMMC\n"); - /* init dev 0, eMMC chip, with 4-bit bus */ - /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra_mmc_init(0, 4, -1, -1); + /* init dev 0, eMMC chip, with 8-bit bus */ + tegra_mmc_init(0, 8, -1, -1); debug("board_mmc_init: init SD slot\n"); /* init dev 3, SD slot, with 4-bit bus */ diff --git a/board/compulab/dts/tegra20-trimslice.dts b/board/compulab/dts/tegra20-trimslice.dts index db79e77..4450674 100644 --- a/board/compulab/dts/tegra20-trimslice.dts +++ b/board/compulab/dts/tegra20-trimslice.dts @@ -8,6 +8,7 @@ aliases { usb0 = "/usb@c5008000"; + usb1 = "/usb@c5000000"; }; memory { @@ -48,7 +49,7 @@ }; usb@c5000000 { - status = "disabled"; + nvidia,vbus-gpio = <&gpio 170 0>; /* PV2 */ }; usb@c5004000 { diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c index 9ef66fd..8f4dd09 100644 --- a/board/compulab/trimslice/trimslice.c +++ b/board/compulab/trimslice/trimslice.c @@ -34,6 +34,14 @@ #include <mmc.h> #endif +void pin_mux_usb(void) +{ + /* + * USB1 internal/external mux GPIO, which masquerades as a VBUS GPIO + * in the current device tree. + */ + pinmux_tristate_disable(PINGRP_UAC); +} void pin_mux_spi(void) { diff --git a/board/corscience/tricorder/tricorder.c b/board/corscience/tricorder/tricorder.c index aaff2e8..56fe495 100644 --- a/board/corscience/tricorder/tricorder.c +++ b/board/corscience/tricorder/tricorder.c @@ -91,15 +91,14 @@ int board_mmc_init(bd_t *bis) * provides the timing values back to the function that configures * the memory. We have either one or two banks of 128MB DDR. */ -void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, - u32 *mr) +void get_board_mem_timings(struct board_sdrc_timings *timings) { /* General SDRC config */ - *mcfg = MICRON_V_MCFG_165(128 << 20); - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = MICRON_V_MCFG_165(128 << 20); + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; /* AC timings */ - *ctrla = MICRON_V_ACTIMA_165; - *ctrlb = MICRON_V_ACTIMB_165; - *mr = MICRON_V_MR_165; + timings->ctrla = MICRON_V_ACTIMA_165; + timings->ctrlb = MICRON_V_ACTIMB_165; + timings->mr = MICRON_V_MR_165; } diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c index 98051fb..d7deae4 100644 --- a/board/esd/cpci750/cpci750.c +++ b/board/esd/cpci750/cpci750.c @@ -953,22 +953,18 @@ int mem_test_walk (void) /*********************************************************************/ int testdram (void) { - char *s; int rundata = 0; int runaddress = 0; int runwalk = 0; #ifdef CONFIG_SYS_DRAM_TEST_DATA - s = getenv ("testdramdata"); - rundata = (s && (*s == 'y')) ? 1 : 0; + rundata = getenv_yesno("testdramdata") == 1; #endif #ifdef CONFIG_SYS_DRAM_TEST_ADDRESS - s = getenv ("testdramaddress"); - runaddress = (s && (*s == 'y')) ? 1 : 0; + runaddress = getenv_yesno("testdramaddress") == 1; #endif #ifdef CONFIG_SYS_DRAM_TEST_WALK - s = getenv ("testdramwalk"); - runwalk = (s && (*s == 'y')) ? 1 : 0; + runwalk = getenv_yesno("testdramwalk") == 1; #endif if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) { diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c index f1ffb7b..e9a78a3 100644 --- a/board/esd/pmc440/cmd_pmc440.c +++ b/board/esd/pmc440/cmd_pmc440.c @@ -391,7 +391,7 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1)); envp = (env_t *)nextbase; res = (char *)envp->data; - len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL); + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); return 1; diff --git a/board/gw8260/gw8260.c b/board/gw8260/gw8260.c index 77a1e1d..64c54d5 100644 --- a/board/gw8260/gw8260.c +++ b/board/gw8260/gw8260.c @@ -544,15 +544,11 @@ int mem_test_walk (void) /*********************************************************************/ int testdram (void) { - char *s; int rundata, runaddress, runwalk; - s = getenv ("testdramdata"); - rundata = (s && (*s == 'y')) ? 1 : 0; - s = getenv ("testdramaddress"); - runaddress = (s && (*s == 'y')) ? 1 : 0; - s = getenv ("testdramwalk"); - runwalk = (s && (*s == 'y')) ? 1 : 0; + rundata = getenv_yesno("testdramdata") == 1; + runaddress = getenv_yesno("testdramaddress") == 1; + runwalk = getenv_yesno("testdramwalk") == 1; if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) { printf ("Testing RAM ... "); diff --git a/board/isee/igep0020/igep0020.c b/board/isee/igep0020/igep0020.c index a8257a3..a0f2aa3 100644 --- a/board/isee/igep0020/igep0020.c +++ b/board/isee/igep0020/igep0020.c @@ -72,27 +72,26 @@ void omap_rev_string(void) * Description: If we use SPL then there is no x-loader nor config header * so we have to setup the DDR timings ourself on both banks. */ -void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, - u32 *mr) +void get_board_mem_timings(struct board_sdrc_timings *timings) { - *mr = MICRON_V_MR_165; + timings->mr = MICRON_V_MR_165; #ifdef CONFIG_BOOT_NAND - *mcfg = MICRON_V_MCFG_200(256 << 20); - *ctrla = MICRON_V_ACTIMA_200; - *ctrlb = MICRON_V_ACTIMB_200; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; + timings->mcfg = MICRON_V_MCFG_200(256 << 20); + timings->ctrla = MICRON_V_ACTIMA_200; + timings->ctrlb = MICRON_V_ACTIMB_200; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; #else if (get_cpu_family() == CPU_OMAP34XX) { - *mcfg = NUMONYX_V_MCFG_165(256 << 20); - *ctrla = NUMONYX_V_ACTIMA_165; - *ctrlb = NUMONYX_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = NUMONYX_V_MCFG_165(256 << 20); + timings->ctrla = NUMONYX_V_ACTIMA_165; + timings->ctrlb = NUMONYX_V_ACTIMB_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; } else { - *mcfg = NUMONYX_V_MCFG_200(256 << 20); - *ctrla = NUMONYX_V_ACTIMA_200; - *ctrlb = NUMONYX_V_ACTIMB_200; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; + timings->mcfg = NUMONYX_V_MCFG_200(256 << 20); + timings->ctrla = NUMONYX_V_ACTIMA_200; + timings->ctrlb = NUMONYX_V_ACTIMB_200; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; } #endif } diff --git a/board/isee/igep0030/igep0030.c b/board/isee/igep0030/igep0030.c index 107cb7f..a41e752 100644 --- a/board/isee/igep0030/igep0030.c +++ b/board/isee/igep0030/igep0030.c @@ -59,27 +59,26 @@ void omap_rev_string(void) * Description: If we use SPL then there is no x-loader nor config header * so we have to setup the DDR timings ourself on both banks. */ -void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, - u32 *mr) +void get_board_mem_timings(struct board_sdrc_timings *timings) { - *mr = MICRON_V_MR_165; + timings->mr = MICRON_V_MR_165; #ifdef CONFIG_BOOT_NAND - *mcfg = MICRON_V_MCFG_200(256 << 20); - *ctrla = MICRON_V_ACTIMA_200; - *ctrlb = MICRON_V_ACTIMB_200; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; + timings->mcfg = MICRON_V_MCFG_200(256 << 20); + timings->ctrla = MICRON_V_ACTIMA_200; + timings->ctrlb = MICRON_V_ACTIMB_200; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; #else if (get_cpu_family() == CPU_OMAP34XX) { - *mcfg = NUMONYX_V_MCFG_165(256 << 20); - *ctrla = NUMONYX_V_ACTIMA_165; - *ctrlb = NUMONYX_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = NUMONYX_V_MCFG_165(256 << 20); + timings->ctrla = NUMONYX_V_ACTIMA_165; + timings->ctrlb = NUMONYX_V_ACTIMB_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; } else { - *mcfg = NUMONYX_V_MCFG_200(256 << 20); - *ctrla = NUMONYX_V_ACTIMA_200; - *ctrlb = NUMONYX_V_ACTIMB_200; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; + timings->mcfg = NUMONYX_V_MCFG_200(256 << 20); + timings->ctrla = NUMONYX_V_ACTIMA_200; + timings->ctrlb = NUMONYX_V_ACTIMB_200; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; } #endif } diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 2c7cd0d..76ec687 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -26,10 +26,12 @@ #include <linux/compiler.h> #include <asm/io.h> #include <asm/arch/clock.h> +#include <asm/arch/display.h> #include <asm/arch/emc.h> #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> #include <asm/arch/pmu.h> +#include <asm/arch/pwm.h> #include <asm/arch/tegra.h> #include <asm/arch/usb.h> #include <asm/arch-tegra/board.h> @@ -119,6 +121,13 @@ int board_init(void) pin_mux_spi(); spi_init(); #endif +#ifdef CONFIG_PWM_TEGRA + if (pwm_init(gd->fdt_blob)) + debug("%s: Failed to init pwm\n", __func__); +#endif +#ifdef CONFIG_LCD + tegra_lcd_check_next_stage(gd->fdt_blob, 0); +#endif /* boot param addr */ gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100); @@ -144,6 +153,9 @@ int board_init(void) pin_mux_usb(); board_usb_init(gd->fdt_blob); #endif +#ifdef CONFIG_LCD + tegra_lcd_check_next_stage(gd->fdt_blob, 0); +#endif #ifdef CONFIG_TEGRA_NAND pin_mux_nand(); @@ -174,7 +186,19 @@ int board_early_init_f(void) /* Initialize periph GPIOs */ gpio_early_init(); gpio_early_init_uart(); +#ifdef CONFIG_LCD + tegra_lcd_early_init(gd->fdt_blob); +#endif return 0; } #endif /* EARLY_INIT */ + +int board_late_init(void) +{ +#ifdef CONFIG_LCD + /* Make sure we finish initing the LCD */ + tegra_lcd_check_next_stage(gd->fdt_blob, 1); +#endif + return 0; +} diff --git a/board/nvidia/dts/tegra20-seaboard.dts b/board/nvidia/dts/tegra20-seaboard.dts index 25a63a0..dd98ca4 100644 --- a/board/nvidia/dts/tegra20-seaboard.dts +++ b/board/nvidia/dts/tegra20-seaboard.dts @@ -163,4 +163,37 @@ compatible = "hynix,hy27uf4g2b", "nand-flash"; }; }; + + host1x { + status = "okay"; + dc@54200000 { + status = "okay"; + rgb { + status = "okay"; + nvidia,panel = <&lcd_panel>; + }; + }; + }; + + lcd_panel: panel { + /* Seaboard has 1366x768 */ + clock = <70600000>; + xres = <1366>; + yres = <768>; + left-margin = <58>; + right-margin = <58>; + hsync-len = <58>; + lower-margin = <4>; + upper-margin = <4>; + vsync-len = <4>; + hsync-active-high; + nvidia,bits-per-pixel = <16>; + nvidia,pwm = <&pwm 2 0>; + nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */ + nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ + nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ + nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ + nvidia,panel-timings = <400 4 203 17 15>; + }; + }; diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c index c7590ac..93430ed 100644 --- a/board/nvidia/harmony/harmony.c +++ b/board/nvidia/harmony/harmony.c @@ -64,9 +64,8 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); debug("board_mmc_init: init SD slot J26\n"); - /* init dev 0, SD slot J26, with 4-bit bus */ - /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); + /* init dev 0, SD slot J26, with 8-bit bus */ + tegra_mmc_init(0, 8, GPIO_PI6, GPIO_PH2); debug("board_mmc_init: init SD slot J5\n"); /* init dev 2, SD slot J5, with 4-bit bus */ diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index c412c07..3e33da0 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -71,9 +71,8 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); debug("board_mmc_init: init eMMC\n"); - /* init dev 0, eMMC chip, with 4-bit bus */ - /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra_mmc_init(0, 4, -1, -1); + /* init dev 0, eMMC chip, with 8-bit bus */ + tegra_mmc_init(0, 8, -1, -1); debug("board_mmc_init: init SD slot\n"); /* init dev 1, SD slot, with 4-bit bus */ diff --git a/board/overo/overo.c b/board/overo/overo.c index c6d50a0..fdf46a2 100644 --- a/board/overo/overo.c +++ b/board/overo/overo.c @@ -147,34 +147,33 @@ int get_board_revision(void) * Description: If we use SPL then there is no x-loader nor config header * so we have to setup the DDR timings ourself on both banks. */ -void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, - u32 *mr) +void get_board_mem_timings(struct board_sdrc_timings *timings) { - *mr = MICRON_V_MR_165; + timings->mr = MICRON_V_MR_165; switch (get_board_revision()) { case REVISION_0: /* Micron 1286MB/256MB, 1/2 banks of 128MB */ - *mcfg = MICRON_V_MCFG_165(128 << 20); - *ctrla = MICRON_V_ACTIMA_165; - *ctrlb = MICRON_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = MICRON_V_MCFG_165(128 << 20); + timings->ctrla = MICRON_V_ACTIMA_165; + timings->ctrlb = MICRON_V_ACTIMB_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; break; case REVISION_1: /* Micron 256MB/512MB, 1/2 banks of 256MB */ - *mcfg = MICRON_V_MCFG_165(256 << 20); - *ctrla = MICRON_V_ACTIMA_165; - *ctrlb = MICRON_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = MICRON_V_MCFG_165(256 << 20); + timings->ctrla = MICRON_V_ACTIMA_165; + timings->ctrlb = MICRON_V_ACTIMB_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; break; case REVISION_2: /* Hynix 256MB/512MB, 1/2 banks of 256MB */ - *mcfg = HYNIX_V_MCFG_165(256 << 20); - *ctrla = HYNIX_V_ACTIMA_165; - *ctrlb = HYNIX_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = HYNIX_V_MCFG_165(256 << 20); + timings->ctrla = HYNIX_V_ACTIMA_165; + timings->ctrlb = HYNIX_V_ACTIMB_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; break; default: - *mcfg = MICRON_V_MCFG_165(128 << 20); - *ctrla = MICRON_V_ACTIMA_165; - *ctrlb = MICRON_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = MICRON_V_MCFG_165(128 << 20); + timings->ctrla = MICRON_V_ACTIMA_165; + timings->ctrlb = MICRON_V_ACTIMB_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; } } #endif diff --git a/board/prodrive/p3mx/p3mx.c b/board/prodrive/p3mx/p3mx.c index 389affc..c3fd191 100644 --- a/board/prodrive/p3mx/p3mx.c +++ b/board/prodrive/p3mx/p3mx.c @@ -768,22 +768,18 @@ int mem_test_walk (void) /*********************************************************************/ int testdram (void) { - char *s; int rundata = 0; int runaddress = 0; int runwalk = 0; #ifdef CONFIG_SYS_DRAM_TEST_DATA - s = getenv ("testdramdata"); - rundata = (s && (*s == 'y')) ? 1 : 0; + rundata = getenv_yesno("testdramdata") == 1; #endif #ifdef CONFIG_SYS_DRAM_TEST_ADDRESS - s = getenv ("testdramaddress"); - runaddress = (s && (*s == 'y')) ? 1 : 0; + runaddress = getenv_yesno("testdramaddress") == 1; #endif #ifdef CONFIG_SYS_DRAM_TEST_WALK - s = getenv ("testdramwalk"); - runwalk = (s && (*s == 'y')) ? 1 : 0; + runwalk = getenv_yesno("testdramwalk") == 1; #endif if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile index 1474fa8..47c6a5a 100644 --- a/board/samsung/smdk5250/Makefile +++ b/board/samsung/smdk5250/Makefile @@ -36,7 +36,7 @@ COBJS += smdk5250.o endif ifdef CONFIG_SPL_BUILD -COBJS += mmc_boot.o +COBJS += spl_boot.o endif SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/board/samsung/smdk5250/smdk5250.c b/board/samsung/smdk5250/smdk5250.c index a5816e4..9c926d6 100644 --- a/board/samsung/smdk5250/smdk5250.c +++ b/board/samsung/smdk5250/smdk5250.c @@ -24,11 +24,13 @@ #include <asm/io.h> #include <i2c.h> #include <netdev.h> +#include <spi.h> #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> #include <asm/arch/pinmux.h> #include <asm/arch/sromc.h> +#include <power/pmic.h> DECLARE_GLOBAL_DATA_PTR; @@ -63,6 +65,9 @@ static int smc9115_pre_init(void) int board_init(void) { gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); +#ifdef CONFIG_EXYNOS_SPI + spi_init(); +#endif return 0; } @@ -79,6 +84,16 @@ int dram_init(void) return 0; } +#if defined(CONFIG_POWER) +int power_init_board(void) +{ + if (pmic_init(I2C_PMIC)) + return -1; + else + return 0; +} +#endif + void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; diff --git a/board/samsung/smdk5250/mmc_boot.c b/board/samsung/smdk5250/spl_boot.c index 449a919..d8f3c1e 100644 --- a/board/samsung/smdk5250/mmc_boot.c +++ b/board/samsung/smdk5250/spl_boot.c @@ -23,6 +23,16 @@ #include<common.h> #include<config.h> +enum boot_mode { + BOOT_MODE_MMC = 4, + BOOT_MODE_SERIAL = 20, + /* Boot based on Operating Mode pin settings */ + BOOT_MODE_OM = 32, + BOOT_MODE_USB, /* Boot using USB download */ +}; + + typedef u32 (*spi_copy_func_t)(u32 offset, u32 nblock, u32 dst); + /* * Copy U-boot from mmc to RAM: * COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains @@ -30,9 +40,26 @@ */ void copy_uboot_to_ram(void) { - u32 (*copy_bl2)(u32, u32, u32) = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR; + spi_copy_func_t spi_copy; + enum boot_mode bootmode; + u32 (*copy_bl2)(u32, u32, u32); + + bootmode = readl(EXYNOS5_POWER_BASE) & OM_STAT; - copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE); + switch (bootmode) { + case BOOT_MODE_SERIAL: + spi_copy = *(spi_copy_func_t *)EXYNOS_COPY_SPI_FNPTR_ADDR; + spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE, + CONFIG_SYS_TEXT_BASE); + break; + case BOOT_MODE_MMC: + copy_bl2 = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR; + copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, + CONFIG_SYS_TEXT_BASE); + break; + default: + break; + } } void board_init_f(unsigned long bootflag) diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index e540190..4724029 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -29,6 +29,7 @@ #include <asm/arch/cpu.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/pinmux.h> #include <asm/arch/clock.h> #include <asm/arch/clk.h> #include <asm/arch/mipi_dsim.h> @@ -361,7 +362,9 @@ int power_init_board(void) int dram_init(void) { gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) + - get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) + + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) + + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE); return 0; } @@ -372,6 +375,10 @@ void dram_init_banksize(void) gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE; + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; + gd->bd->bi_dram[2].size = PHYS_SDRAM_3_SIZE; + gd->bd->bi_dram[3].start = PHYS_SDRAM_4; + gd->bd->bi_dram[3].size = PHYS_SDRAM_4_SIZE; } static unsigned int get_hw_revision(void) @@ -419,54 +426,22 @@ int board_mmc_init(bd_t *bis) { struct exynos4_gpio_part2 *gpio = (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); - int i, err; + int err; /* eMMC_EN: SD_0_CDn: GPK0[2] Output High */ s5p_gpio_direction_output(&gpio->k0, 2, 1); s5p_gpio_set_pull(&gpio->k0, 2, GPIO_PULL_NONE); /* - * eMMC GPIO: - * SDR 8-bit@48MHz at MMC0 - * GPK0[0] SD_0_CLK(2) - * GPK0[1] SD_0_CMD(2) - * GPK0[2] SD_0_CDn -> Not used - * GPK0[3:6] SD_0_DATA[0:3](2) - * GPK1[3:6] SD_0_DATA[0:3](3) - * - * DDR 4-bit@26MHz at MMC4 - * GPK0[0] SD_4_CLK(3) - * GPK0[1] SD_4_CMD(3) - * GPK0[2] SD_4_CDn -> Not used - * GPK0[3:6] SD_4_DATA[0:3](3) - * GPK1[3:6] SD_4_DATA[4:7](4) - */ - for (i = 0; i < 7; i++) { - if (i == 2) - continue; - /* GPK0[0:6] special function 2 */ - s5p_gpio_cfg_pin(&gpio->k0, i, 0x2); - /* GPK0[0:6] pull disable */ - s5p_gpio_set_pull(&gpio->k0, i, GPIO_PULL_NONE); - /* GPK0[0:6] drv 4x */ - s5p_gpio_set_drv(&gpio->k0, i, GPIO_DRV_4X); - } - - for (i = 3; i < 7; i++) { - /* GPK1[3:6] special function 3 */ - s5p_gpio_cfg_pin(&gpio->k1, i, 0x3); - /* GPK1[3:6] pull disable */ - s5p_gpio_set_pull(&gpio->k1, i, GPIO_PULL_NONE); - /* GPK1[3:6] drv 4x */ - s5p_gpio_set_drv(&gpio->k1, i, GPIO_DRV_4X); - } - - /* * MMC device init * mmc0 : eMMC (8-bit buswidth) * mmc2 : SD card (4-bit buswidth) */ - err = s5p_mmc_init(0, 8); + err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE); + if (err) + debug("SDMMC0 not configured\n"); + else + err = s5p_mmc_init(0, 8); /* T-flash detect */ s5p_gpio_cfg_pin(&gpio->x3, 4, 0xf); @@ -477,24 +452,11 @@ int board_mmc_init(bd_t *bis) * GPX3[4] T-flash detect pin */ if (!s5p_gpio_get_value(&gpio->x3, 4)) { - /* - * SD card GPIO: - * GPK2[0] SD_2_CLK(2) - * GPK2[1] SD_2_CMD(2) - * GPK2[2] SD_2_CDn -> Not used - * GPK2[3:6] SD_2_DATA[0:3](2) - */ - for (i = 0; i < 7; i++) { - if (i == 2) - continue; - /* GPK2[0:6] special function 2 */ - s5p_gpio_cfg_pin(&gpio->k2, i, 0x2); - /* GPK2[0:6] pull disable */ - s5p_gpio_set_pull(&gpio->k2, i, GPIO_PULL_NONE); - /* GPK2[0:6] drv 4x */ - s5p_gpio_set_drv(&gpio->k2, i, GPIO_DRV_4X); - } - err = s5p_mmc_init(2, 4); + err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE); + if (err) + debug("SDMMC2 not configured\n"); + else + err = s5p_mmc_init(2, 4); } return err; @@ -629,6 +591,10 @@ static void board_power_init(void) writel(0, (unsigned int)&pwr->lcd1_configuration); writel(0, (unsigned int)&pwr->gps_configuration); writel(0, (unsigned int)&pwr->gps_alive_configuration); + + /* It is necessary to power down core 1 */ + /* to successfully boot CPU1 in kernel */ + writel(0, (unsigned int)&pwr->arm_core1_configuration); } static void board_uart_init(void) diff --git a/board/samsung/universal_c210/Makefile b/board/samsung/universal_c210/Makefile index bfec08f..587cc1b 100644 --- a/board/samsung/universal_c210/Makefile +++ b/board/samsung/universal_c210/Makefile @@ -26,7 +26,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o COBJS-y := universal.o onenand.o -SOBJS := lowlevel_init.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/samsung/universal_c210/lowlevel_init.S b/board/samsung/universal_c210/lowlevel_init.S deleted file mode 100644 index dc7f69e..0000000 --- a/board/samsung/universal_c210/lowlevel_init.S +++ /dev/null @@ -1,395 +0,0 @@ -/* - * Lowlevel setup for universal board based on EXYNOS4210 - * - * Copyright (C) 2010 Samsung Electronics - * Kyungmin Park <kyungmin.park@samsung.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/cpu.h> -#include <asm/arch/clock.h> - -/* - * Register usages: - * - * r5 has zero always - * r7 has GPIO part1 base 0x11400000 - * r6 has GPIO part2 base 0x11000000 - */ - - .globl lowlevel_init -lowlevel_init: - mov r11, lr - - /* r5 has always zero */ - mov r5, #0 - - ldr r7, =EXYNOS4_GPIO_PART1_BASE - ldr r6, =EXYNOS4_GPIO_PART2_BASE - - /* System Timer */ - ldr r0, =EXYNOS4_SYSTIMER_BASE - ldr r1, =0x5000 - str r1, [r0, #0x0] - ldr r1, =0xffffffff - str r1, [r0, #0x8] - ldr r1, =0x49 - str r1, [r0, #0x4] - - /* PMIC manual reset */ - /* nPOWER: XEINT_23: GPX2[7] */ - add r0, r6, #0xC40 @ EXYNOS4_GPIO_X2_OFFSET - ldr r1, [r0, #0x0] - bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit - orr r1, r1, #(0x1 << 28) @ Output - str r1, [r0, #0x0] - - ldr r1, [r0, #0x4] - orr r1, r1, #(1 << 7) @ 7 = 7 * 1-bit - str r1, [r0, #0x4] - - /* init system clock */ - bl system_clock_init - - /* Disable Watchdog */ - ldr r0, =EXYNOS4_WATCHDOG_BASE @0x10060000 - str r5, [r0] - - /* UART */ - bl uart_asm_init - - /* PMU init */ - bl system_power_init - - bl tzpc_init - - mov lr, r11 - mov pc, lr - nop - nop - nop - -/* - * uart_asm_init: Initialize UART's pins - */ -uart_asm_init: - /* - * setup UART0-UART4 GPIOs (part1) - * GPA1CON[3] = I2C_3_SCL (3) - * GPA1CON[2] = I2C_3_SDA (3) - */ - mov r0, r7 - ldr r1, =0x22222222 - str r1, [r0, #0x00] @ EXYNOS4_GPIO_A0_OFFSET - ldr r1, =0x00223322 - str r1, [r0, #0x20] @ EXYNOS4_GPIO_A1_OFFSET - - /* UART_SEL GPY4[7] (part2) at EXYNOS4 */ - add r0, r6, #0x1A0 @ EXYNOS4_GPIO_Y4_OFFSET - ldr r1, [r0, #0x0] - bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit - orr r1, r1, #(0x1 << 28) - str r1, [r0, #0x0] - - ldr r1, [r0, #0x8] - bic r1, r1, #(0x3 << 14) @ 14 = 7 * 2-bit - orr r1, r1, #(0x3 << 14) @ Pull-up enabled - str r1, [r0, #0x8] - - ldr r1, [r0, #0x4] - orr r1, r1, #(1 << 7) @ 7 = 7 * 1-bit - str r1, [r0, #0x4] - - mov pc, lr - nop - nop - nop - -system_clock_init: - ldr r0, =EXYNOS4_CLOCK_BASE - - /* APLL(1), MPLL(1), CORE(0), HPM(0) */ - ldr r1, =0x0101 - ldr r2, =0x14200 @ CLK_SRC_CPU - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x10000 -1: subs r1, r1, #1 - bne 1b - - /* - * CLK_SRC_TOP0 - * MUX_ONENAND_SEL[28] 0: DOUT133, 1: DOUT166 - * MUX_VPLL_SEL[8] 0: FINPLL, 1: FOUTVPLL - * MUX_EPLL_SEL[4] 0: FINPLL, 1: FOUTEPLL - */ - ldr r1, =0x10000110 - ldr r2, =0x0C210 @ CLK_SRC_TOP - str r1, [r0, r2] - - /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */ - ldr r1, =0x0066666 - ldr r2, =0x0C240 @ CLK_SRC_FSYS - str r1, [r0, r2] - /* UART[0:5], PWM: SCLKMPLL(6) */ - ldr r1, =0x6666666 - ldr r2, =0x0C250 @ CLK_SRC_PERIL0_OFFSET - str r1, [r0, r2] - - /* CPU0: CORE, COREM0, COREM1, PERI, ATB, PCLK_DBG, APLL */ - ldr r1, =0x0133730 - ldr r2, =0x14500 @ CLK_DIV_CPU0 - str r1, [r0, r2] - /* CPU1: COPY, HPM */ - ldr r1, =0x03 - ldr r2, =0x14504 @ CLK_DIV_CPU1 - str r1, [r0, r2] - /* DMC0: ACP, ACP_PCLK, DPHY, DMC, DMCD, DMCP, COPY2 CORE_TIMER */ - ldr r1, =0x13111113 - ldr r2, =0x10500 @ CLK_DIV_DMC0 - str r1, [r0, r2] - /* DMC1: PWI, DVSEM, DPM */ - ldr r1, =0x01010100 - ldr r2, =0x10504 @ CLK_DIV_DMC1 - str r1, [r0, r2] - /* LEFTBUS: GDL, GPL */ - ldr r1, =0x13 - ldr r2, =0x04500 @ CLK_DIV_LEFTBUS - str r1, [r0, r2] - /* RIGHHTBUS: GDR, GPR */ - ldr r1, =0x13 - ldr r2, =0x08500 @ CLK_DIV_RIGHTBUS - str r1, [r0, r2] - /* - * CLK_DIV_TOP - * ONENAND_RATIOD[18:16]: 0 SCLK_ONENAND = MOUTONENAND / (n + 1) - * ACLK_200, ACLK_100, ACLK_160, ACLK_133, - */ - ldr r1, =0x00005473 - ldr r2, =0x0C510 @ CLK_DIV_TOP - str r1, [r0, r2] - /* MMC[0:1] */ - ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */ - ldr r2, =0x0C544 @ CLK_DIV_FSYS1 - str r1, [r0, r2] - /* MMC[2:3] */ - ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */ - ldr r2, =0x0C548 @ CLK_DIV_FSYS2 - str r1, [r0, r2] - /* MMC4 */ - ldr r1, =0x000f /* 800(MPLL) / (15 + 1) */ - ldr r2, =0x0C54C @ CLK_DIV_FSYS3 - str r1, [r0, r2] - /* UART[0:5] */ - ldr r1, =0x774777 - ldr r2, =0x0C550 @ CLK_DIV_PERIL0 - str r1, [r0, r2] - /* SLIMBUS: ???, PWM */ - ldr r1, =0x8 - ldr r2, =0x0C55C @ CLK_DIV_PERIL3 - str r1, [r0, r2] - - /* PLL Setting */ - ldr r1, =0x1C20 - ldr r2, =0x14000 @ APLL_LOCK - str r1, [r0, r2] - ldr r2, =0x14008 @ MPLL_LOCK - str r1, [r0, r2] - ldr r2, =0x0C010 @ EPLL_LOCK - str r1, [r0, r2] - ldr r2, =0x0C020 @ VPLL_LOCK - str r1, [r0, r2] - - /* APLL */ - ldr r1, =0x8000001c - ldr r2, =0x14104 @ APLL_CON1 - str r1, [r0, r2] - ldr r1, =0x80c80601 @ 800MHz - ldr r2, =0x14100 @ APLL_CON0 - str r1, [r0, r2] - /* MPLL */ - ldr r1, =0x8000001C - ldr r2, =0x1410C @ MPLL_CON1 - str r1, [r0, r2] - ldr r1, =0x80c80601 @ 800MHz - ldr r2, =0x14108 @ MPLL_CON0 - str r1, [r0, r2] - /* EPLL */ - ldr r1, =0x0 - ldr r2, =0x0C114 @ EPLL_CON1 - str r1, [r0, r2] - ldr r1, =0x80300302 @ 96MHz - ldr r2, =0x0C110 @ EPLL_CON0 - str r1, [r0, r2] - /* VPLL */ - ldr r1, =0x11000400 - ldr r2, =0x0C124 @ VPLL_CON1 - str r1, [r0, r2] - ldr r1, =0x80350302 @ 108MHz - ldr r2, =0x0C120 @ VPLL_CON0 - str r1, [r0, r2] - - /* - * SMMUJPEG[11], JPEG[6], CSIS1[5] : 0111 1001 - * Turn off all - */ - ldr r1, =0xFFF80000 - ldr r2, =0x0C920 @ CLK_GATE_IP_CAM - str r1, [r0, r2] - - /* Turn off all */ - ldr r1, =0xFFFFFFC0 - ldr r2, =0x0C924 @ CLK_GATE_IP_VP - str r1, [r0, r2] - - /* Turn off all */ - ldr r1, =0xFFFFFFE0 - ldr r2, =0x0C928 @ CLK_GATE_IP_MFC - str r1, [r0, r2] - - /* Turn off all */ - ldr r1, =0xFFFFFFFC - ldr r2, =0x0C92C @ CLK_GATE_IP_G3D - str r1, [r0, r2] - - /* Turn off all */ - ldr r1, =0xFFFFFC00 - ldr r2, =0x0C930 @ CLK_GATE_IP_IMAGE - str r1, [r0, r2] - - /* DSIM0[3], MDNIE0[2], MIE0[1] : 0001 */ - ldr r1, =0xFFFFFFF1 - ldr r2, =0x0C934 @ CLK_GATE_IP_LCD0 - str r1, [r0, r2] - - /* Turn off all */ - ldr r1, =0xFFFFFFC0 - ldr r2, =0x0C938 @ CLK_GATE_IP_LCD1 - str r1, [r0, r2] - - /* - * SMMUPCIE[18], NFCON[16] : 1111 1010 - * PCIE[14], SATA[10], SDMMC43[9:8] : 1011 1000 - * SDMMC1[6], TSI[4], SATAPHY[3], PCIEPHY[2] : 1010 0011 - */ - ldr r1, =0xFFFAB8A3 - ldr r2, =0x0C940 @ CLK_GATE_IP_FSYS - str r1, [r0, r2] - - /* Turn off all */ - ldr r1, =0xFFFFFFFC - ldr r2, =0x0C94C @ CLK_GATE_IP_GPS - str r1, [r0, r2] - - /* - * AC97[27], SPDIF[26], SLIMBUS[25] : 1111 0001 - * I2C2[8] : 1111 1110 - */ - ldr r1, =0xF1FFFEFF - ldr r2, =0x0C950 @ CLK_GATE_IP_PERIL - str r1, [r0, r2] - - /* - * KEYIF[16] : 1111 1110 - */ - ldr r1, =0xFFFEFFFF - ldr r2, =0x0C960 @ CLK_GATE_IP_PERIR - str r1, [r0, r2] - - /* LCD1[5], G3D[3], MFC[2], TV[1] : 1101 0001 */ - ldr r1, =0xFFFFFFD1 - ldr r2, =0x0C970 @ CLK_GATE_BLOCK - str r1, [r0, r2] - mov pc, lr - nop - nop - nop - -system_power_init: - ldr r0, =EXYNOS4_POWER_BASE @ 0x10020000 - - ldr r2, =0x330C @ PS_HOLD_CONTROL - ldr r1, [r0, r2] - orr r1, r1, #(0x3 << 8) @ Data High, Output En - str r1, [r0, r2] - - /* Power Down */ - add r2, r0, #0x3000 - str r5, [r2, #0xC20] @ TV_CONFIGURATION - str r5, [r2, #0xC40] @ MFC_CONFIGURATION - str r5, [r2, #0xC60] @ G3D_CONFIGURATION - str r5, [r2, #0xCA0] @ LCD1_CONFIGURATION - str r5, [r2, #0xCE0] @ GPS_CONFIGURATION - - mov pc, lr - nop - nop - nop - -tzpc_init: - ldr r0, =0x10110000 - mov r1, #0x0 - str r1, [r0] - mov r1, #0xff - str r1, [r0, #0x0804] - str r1, [r0, #0x0810] - str r1, [r0, #0x081C] - str r1, [r0, #0x0828] - - ldr r0, =0x10120000 - mov r1, #0x0 - str r1, [r0] - mov r1, #0xff - str r1, [r0, #0x0804] - str r1, [r0, #0x0810] - str r1, [r0, #0x081C] - str r1, [r0, #0x0828] - - ldr r0, =0x10130000 - mov r1, #0x0 - str r1, [r0] - mov r1, #0xff - str r1, [r0, #0x0804] - str r1, [r0, #0x0810] - str r1, [r0, #0x081C] - str r1, [r0, #0x0828] - - ldr r0, =0x10140000 - mov r1, #0x0 - str r1, [r0] - mov r1, #0xff - str r1, [r0, #0x0804] - str r1, [r0, #0x0810] - str r1, [r0, #0x081C] - str r1, [r0, #0x0828] - - ldr r0, =0x10150000 - mov r1, #0x0 - str r1, [r0] - mov r1, #0xff - str r1, [r0, #0x0804] - str r1, [r0, #0x0810] - str r1, [r0, #0x081C] - str r1, [r0, #0x0828] - - mov pc, lr diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c index 36a0472..e742707 100644 --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@ -23,10 +23,17 @@ */ #include <common.h> +#include <spi.h> +#include <lcd.h> #include <asm/io.h> +#include <asm/gpio.h> #include <asm/arch/adc.h> #include <asm/arch/gpio.h> #include <asm/arch/mmc.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/watchdog.h> +#include <libtizen.h> +#include <ld9040.h> #include <power/pmic.h> #include <usb/s3c_udc.h> #include <asm/arch/cpu.h> @@ -48,21 +55,7 @@ static int get_hwrev(void) return board_rev & 0xFF; } -static void check_hw_revision(void); - -int board_init(void) -{ - gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE; - gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE; - - gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210; - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - check_hw_revision(); - printf("HW Revision:\t0x%x\n", board_rev); - - return 0; -} +static void init_pmic_lcd(void); int power_init_board(void) { @@ -72,6 +65,8 @@ int power_init_board(void) if (ret) return ret; + init_pmic_lcd(); + return 0; } @@ -186,7 +181,7 @@ int checkboard(void) #ifdef CONFIG_GENERIC_MMC int board_mmc_init(bd_t *bis) { - int i, err; + int err; switch (get_hwrev()) { case 0: @@ -209,75 +204,30 @@ int board_mmc_init(bd_t *bis) } /* - * eMMC GPIO: - * SDR 8-bit@48MHz at MMC0 - * GPK0[0] SD_0_CLK(2) - * GPK0[1] SD_0_CMD(2) - * GPK0[2] SD_0_CDn -> Not used - * GPK0[3:6] SD_0_DATA[0:3](2) - * GPK1[3:6] SD_0_DATA[0:3](3) - * - * DDR 4-bit@26MHz at MMC4 - * GPK0[0] SD_4_CLK(3) - * GPK0[1] SD_4_CMD(3) - * GPK0[2] SD_4_CDn -> Not used - * GPK0[3:6] SD_4_DATA[0:3](3) - * GPK1[3:6] SD_4_DATA[4:7](4) + * MMC device init + * mmc0 : eMMC (8-bit buswidth) + * mmc2 : SD card (4-bit buswidth) */ - for (i = 0; i < 7; i++) { - if (i == 2) - continue; - /* GPK0[0:6] special function 2 */ - s5p_gpio_cfg_pin(&gpio2->k0, i, 0x2); - /* GPK0[0:6] pull disable */ - s5p_gpio_set_pull(&gpio2->k0, i, GPIO_PULL_NONE); - /* GPK0[0:6] drv 4x */ - s5p_gpio_set_drv(&gpio2->k0, i, GPIO_DRV_4X); - } - - for (i = 3; i < 7; i++) { - /* GPK1[3:6] special function 3 */ - s5p_gpio_cfg_pin(&gpio2->k1, i, 0x3); - /* GPK1[3:6] pull disable */ - s5p_gpio_set_pull(&gpio2->k1, i, GPIO_PULL_NONE); - /* GPK1[3:6] drv 4x */ - s5p_gpio_set_drv(&gpio2->k1, i, GPIO_DRV_4X); - } + err = exynos_pinmux_config(PERIPH_ID_SDMMC0, PINMUX_FLAG_8BIT_MODE); + if (err) + debug("SDMMC0 not configured\n"); + else + err = s5p_mmc_init(0, 8); /* T-flash detect */ s5p_gpio_cfg_pin(&gpio2->x3, 4, 0xf); s5p_gpio_set_pull(&gpio2->x3, 4, GPIO_PULL_UP); /* - * MMC device init - * mmc0 : eMMC (8-bit buswidth) - * mmc2 : SD card (4-bit buswidth) - */ - err = s5p_mmc_init(0, 8); - - /* * Check the T-flash detect pin * GPX3[4] T-flash detect pin */ if (!s5p_gpio_get_value(&gpio2->x3, 4)) { - /* - * SD card GPIO: - * GPK2[0] SD_2_CLK(2) - * GPK2[1] SD_2_CMD(2) - * GPK2[2] SD_2_CDn -> Not used - * GPK2[3:6] SD_2_DATA[0:3](2) - */ - for (i = 0; i < 7; i++) { - if (i == 2) - continue; - /* GPK2[0:6] special function 2 */ - s5p_gpio_cfg_pin(&gpio2->k2, i, 0x2); - /* GPK2[0:6] pull disable */ - s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE); - /* GPK2[0:6] drv 4x */ - s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X); - } - err = s5p_mmc_init(2, 4); + err = exynos_pinmux_config(PERIPH_ID_SDMMC2, PINMUX_FLAG_NONE); + if (err) + debug("SDMMC2 not configured\n"); + else + err = s5p_mmc_init(2, 4); } return err; @@ -331,3 +281,242 @@ struct s3c_plat_otg_data s5pc210_otg_data = { .usb_flags = PHY0_SLEEP, }; #endif + +int board_early_init_f(void) +{ + wdt_stop(); + + return 0; +} + +#ifdef CONFIG_SOFT_SPI +static void soft_spi_init(void) +{ + gpio_direction_output(CONFIG_SOFT_SPI_GPIO_SCLK, + CONFIG_SOFT_SPI_MODE & SPI_CPOL); + gpio_direction_output(CONFIG_SOFT_SPI_GPIO_MOSI, 1); + gpio_direction_input(CONFIG_SOFT_SPI_GPIO_MISO); + gpio_direction_output(CONFIG_SOFT_SPI_GPIO_CS, + !(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH)); +} + +void spi_cs_activate(struct spi_slave *slave) +{ + gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS, + !(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH)); + SPI_SCL(1); + gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS, + CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + gpio_set_value(CONFIG_SOFT_SPI_GPIO_CS, + !(CONFIG_SOFT_SPI_MODE & SPI_CS_HIGH)); +} + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs == 0; +} + +void universal_spi_scl(int bit) +{ + gpio_set_value(CONFIG_SOFT_SPI_GPIO_SCLK, bit); +} + +void universal_spi_sda(int bit) +{ + gpio_set_value(CONFIG_SOFT_SPI_GPIO_MOSI, bit); +} + +int universal_spi_read(void) +{ + return gpio_get_value(CONFIG_SOFT_SPI_GPIO_MISO); +} +#endif + +static void init_pmic_lcd(void) +{ + unsigned char val; + int ret = 0; + + struct pmic *p = pmic_get("MAX8998_PMIC"); + + if (!p) + return; + + if (pmic_probe(p)) + return; + + /* LDO7 1.8V */ + val = 0x02; /* (1800 - 1600) / 100; */ + ret |= pmic_reg_write(p, MAX8998_REG_LDO7, val); + + /* LDO17 3.0V */ + val = 0xe; /* (3000 - 1600) / 100; */ + ret |= pmic_reg_write(p, MAX8998_REG_LDO17, val); + + /* Disable unneeded regulators */ + /* + * ONOFF1 + * Buck1 ON, Buck2 OFF, Buck3 ON, Buck4 ON + * LDO2 ON, LDO3 OFF, LDO4 OFF, LDO5 ON + */ + val = 0xB9; + ret |= pmic_reg_write(p, MAX8998_REG_ONOFF1, val); + + /* ONOFF2 + * LDO6 OFF, LDO7 ON, LDO8 OFF, LDO9 ON, + * LDO10 OFF, LDO11 OFF, LDO12 OFF, LDO13 OFF + */ + val = 0x50; + ret |= pmic_reg_write(p, MAX8998_REG_ONOFF2, val); + + /* ONOFF3 + * LDO14 OFF, LDO15 OFF, LGO16 OFF, LDO17 OFF + * EPWRHOLD OFF, EBATTMON OFF, ELBCNFG2 OFF, ELBCNFG1 OFF + */ + val = 0x00; + ret |= pmic_reg_write(p, MAX8998_REG_ONOFF3, val); + + if (ret) + puts("LCD pmic initialisation error!\n"); +} + +static void lcd_cfg_gpio(void) +{ + unsigned int i, f3_end = 4; + + for (i = 0; i < 8; i++) { + /* set GPF0,1,2[0:7] for RGB Interface and Data lines (32bit) */ + s5p_gpio_cfg_pin(&gpio1->f0, i, GPIO_FUNC(2)); + s5p_gpio_cfg_pin(&gpio1->f1, i, GPIO_FUNC(2)); + s5p_gpio_cfg_pin(&gpio1->f2, i, GPIO_FUNC(2)); + /* pull-up/down disable */ + s5p_gpio_set_pull(&gpio1->f0, i, GPIO_PULL_NONE); + s5p_gpio_set_pull(&gpio1->f1, i, GPIO_PULL_NONE); + s5p_gpio_set_pull(&gpio1->f2, i, GPIO_PULL_NONE); + + /* drive strength to max (24bit) */ + s5p_gpio_set_drv(&gpio1->f0, i, GPIO_DRV_4X); + s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW); + s5p_gpio_set_drv(&gpio1->f1, i, GPIO_DRV_4X); + s5p_gpio_set_rate(&gpio1->f1, i, GPIO_DRV_SLOW); + s5p_gpio_set_drv(&gpio1->f2, i, GPIO_DRV_4X); + s5p_gpio_set_rate(&gpio1->f0, i, GPIO_DRV_SLOW); + } + + for (i = 0; i < f3_end; i++) { + /* set GPF3[0:3] for RGB Interface and Data lines (32bit) */ + s5p_gpio_cfg_pin(&gpio1->f3, i, GPIO_FUNC(2)); + /* pull-up/down disable */ + s5p_gpio_set_pull(&gpio1->f3, i, GPIO_PULL_NONE); + /* drive strength to max (24bit) */ + s5p_gpio_set_drv(&gpio1->f3, i, GPIO_DRV_4X); + s5p_gpio_set_rate(&gpio1->f3, i, GPIO_DRV_SLOW); + } + + /* gpio pad configuration for LCD reset. */ + s5p_gpio_cfg_pin(&gpio2->y4, 5, GPIO_OUTPUT); + + spi_init(); +} + +static void reset_lcd(void) +{ + s5p_gpio_set_value(&gpio2->y4, 5, 1); + udelay(10000); + s5p_gpio_set_value(&gpio2->y4, 5, 0); + udelay(10000); + s5p_gpio_set_value(&gpio2->y4, 5, 1); + udelay(100); +} + +static void lcd_power_on(void) +{ + struct pmic *p = pmic_get("MAX8998_PMIC"); + + if (!p) + return; + + if (pmic_probe(p)) + return; + + pmic_set_output(p, MAX8998_REG_ONOFF3, MAX8998_LDO17, LDO_ON); + pmic_set_output(p, MAX8998_REG_ONOFF2, MAX8998_LDO7, LDO_ON); +} + +vidinfo_t panel_info = { + .vl_freq = 60, + .vl_col = 480, + .vl_row = 800, + .vl_width = 480, + .vl_height = 800, + .vl_clkp = CONFIG_SYS_HIGH, + .vl_hsp = CONFIG_SYS_HIGH, + .vl_vsp = CONFIG_SYS_HIGH, + .vl_dp = CONFIG_SYS_HIGH, + + .vl_bpix = 5, /* Bits per pixel */ + + /* LD9040 LCD Panel */ + .vl_hspw = 2, + .vl_hbpd = 16, + .vl_hfpd = 16, + + .vl_vspw = 2, + .vl_vbpd = 8, + .vl_vfpd = 8, + .vl_cmd_allow_len = 0xf, + + .win_id = 0, + .cfg_gpio = lcd_cfg_gpio, + .backlight_on = NULL, + .lcd_power_on = lcd_power_on, + .reset_lcd = reset_lcd, + .dual_lcd_enabled = 0, + + .init_delay = 0, + .power_on_delay = 10000, + .reset_delay = 10000, + .interface_mode = FIMD_RGB_INTERFACE, + .mipi_enabled = 0, +}; + +void init_panel_info(vidinfo_t *vid) +{ + vid->logo_on = 1; + vid->resolution = HD_RESOLUTION; + vid->rgb_mode = MODE_RGB_P; + +#ifdef CONFIG_TIZEN + get_tizen_logo_info(vid); +#endif + + /* for LD9040. */ + vid->pclk_name = 1; /* MPLL */ + vid->sclk_div = 1; + + vid->cfg_ldo = ld9040_cfg_ldo; + vid->enable_ldo = ld9040_enable_ldo; + + setenv("lcdinfo", "lcd=ld9040"); +} + +int board_init(void) +{ + gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE; + gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE; + + gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + +#ifdef CONFIG_SOFT_SPI + soft_spi_init(); +#endif + check_hw_revision(); + printf("HW Revision:\t0x%x\n", board_rev); + + return 0; +} diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c index 1471559..c9eea9b 100644 --- a/board/technexion/twister/twister.c +++ b/board/technexion/twister/twister.c @@ -98,9 +98,12 @@ int board_init(void) return 0; } +#ifndef CONFIG_SPL_BUILD int misc_init_r(void) { char *eth_addr; + struct tam3517_module_info info; + int ret; dieid_num_r(); @@ -108,12 +111,13 @@ int misc_init_r(void) if (eth_addr) return 0; -#ifndef CONFIG_SPL_BUILD - TAM3517_READ_MAC_FROM_EEPROM; -#endif + TAM3517_READ_EEPROM(&info, ret); + if (!ret) + TAM3517_READ_MAC_FROM_EEPROM(&info); return 0; } +#endif /* * Routine: set_muxconf_regs diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c index 9622a81..c516c75 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.c +++ b/board/teejet/mt_ventoux/mt_ventoux.c @@ -73,10 +73,10 @@ static struct { static struct panel_config lcd_cfg[] = { { - .timing_h = PANEL_TIMING_H(4, 8, 41), - .timing_v = PANEL_TIMING_V(2, 4, 10), - .pol_freq = 0x00000000, /* Pol Freq */ - .divisor = 0x0001000d, /* 33Mhz Pixel Clock */ + .timing_h = PANEL_TIMING_H(40, 5, 2), + .timing_v = PANEL_TIMING_V(8, 8, 2), + .pol_freq = 0x00003000, /* Pol Freq */ + .divisor = 0x00010033, /* 9 Mhz Pixel Clock */ .panel_type = 0x01, /* TFT */ .data_lines = 0x03, /* 24 Bit RGB */ .load_mode = 0x02, /* Frame Mode */ @@ -258,21 +258,26 @@ int board_init(void) return 0; } +#ifndef CONFIG_SPL_BUILD int misc_init_r(void) { char *eth_addr; + struct tam3517_module_info info; + int ret; + TAM3517_READ_EEPROM(&info, ret); dieid_num_r(); - eth_addr = getenv("ethaddr"); - if (eth_addr) + if (ret) return 0; + eth_addr = getenv("ethaddr"); + if (!eth_addr) + TAM3517_READ_MAC_FROM_EEPROM(&info); -#ifndef CONFIG_SPL_BUILD - TAM3517_READ_MAC_FROM_EEPROM; -#endif + TAM3517_PRINT_SOM_INFO(&info); return 0; } +#endif /* * Routine: set_muxconf_regs diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index f0eca54..ed4229e 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -44,7 +44,7 @@ static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; /* MII mode defines */ #define MII_MODE_ENABLE 0x0 -#define RGMII_MODE_ENABLE 0xA +#define RGMII_MODE_ENABLE 0x3A /* GPIO that controls power to DDR on EVM-SK */ #define GPIO_DDR_VTT_EN 7 @@ -318,6 +318,8 @@ int board_init(void) gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + gpmc_init(); + return 0; } diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c index 8437ef5..0283708 100644 --- a/board/ti/am335x/mux.c +++ b/board/ti/am335x/mux.c @@ -171,6 +171,25 @@ static struct module_pin_mux mii1_pin_mux[] = { {-1}, }; +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ + {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ + {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ + {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ + {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ + {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ + {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ + {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ + {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ + {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ + {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ + {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ + {-1}, +}; + void enable_uart0_pin_mux(void) { configure_module_pin_mux(uart0_pin_mux); @@ -257,6 +276,9 @@ void enable_board_pin_mux(struct am335x_baseboard_id *header) /* In profile #2 i2c1 and spi0 conflict. */ if (profile & ~PROFILE_2) configure_module_pin_mux(i2c1_pin_mux); + /* Profiles 2 & 3 don't have NAND */ + if (profile & ~(PROFILE_2 | PROFILE_3)) + configure_module_pin_mux(nand_pin_mux); else if (profile == PROFILE_2) { configure_module_pin_mux(mmc1_pin_mux); configure_module_pin_mux(spi0_pin_mux); diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index f20ebed..b829a79 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -144,8 +144,7 @@ static int get_board_revision(void) * Description: If we use SPL then there is no x-loader nor config header * so we have to setup the DDR timings ourself on both banks. */ -void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, - u32 *mr) +void get_board_mem_timings(struct board_sdrc_timings *timings) { int pop_mfr, pop_id; @@ -156,29 +155,29 @@ void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, */ identify_nand_chip(&pop_mfr, &pop_id); - *mr = MICRON_V_MR_165; + timings->mr = MICRON_V_MR_165; switch (get_board_revision()) { case REVISION_C4: if (pop_mfr == NAND_MFR_STMICRO && pop_id == 0xba) { /* 512MB DDR */ - *mcfg = NUMONYX_V_MCFG_165(512 << 20); - *ctrla = NUMONYX_V_ACTIMA_165; - *ctrlb = NUMONYX_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = NUMONYX_V_MCFG_165(512 << 20); + timings->ctrla = NUMONYX_V_ACTIMA_165; + timings->ctrlb = NUMONYX_V_ACTIMB_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; break; } else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xba) { /* Beagleboard Rev C4, 512MB Nand/256MB DDR*/ - *mcfg = MICRON_V_MCFG_165(128 << 20); - *ctrla = MICRON_V_ACTIMA_165; - *ctrlb = MICRON_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = MICRON_V_MCFG_165(128 << 20); + timings->ctrla = MICRON_V_ACTIMA_165; + timings->ctrlb = MICRON_V_ACTIMB_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; break; } else if (pop_mfr == NAND_MFR_MICRON && pop_id == 0xbc) { /* Beagleboard Rev C5, 256MB DDR */ - *mcfg = MICRON_V_MCFG_200(256 << 20); - *ctrla = MICRON_V_ACTIMA_200; - *ctrlb = MICRON_V_ACTIMB_200; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; + timings->mcfg = MICRON_V_MCFG_200(256 << 20); + timings->ctrla = MICRON_V_ACTIMA_200; + timings->ctrlb = MICRON_V_ACTIMB_200; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; break; } case REVISION_XM_A: @@ -186,24 +185,24 @@ void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, case REVISION_XM_C: if (pop_mfr == 0) { /* 256MB DDR */ - *mcfg = MICRON_V_MCFG_200(256 << 20); - *ctrla = MICRON_V_ACTIMA_200; - *ctrlb = MICRON_V_ACTIMB_200; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; + timings->mcfg = MICRON_V_MCFG_200(256 << 20); + timings->ctrla = MICRON_V_ACTIMA_200; + timings->ctrlb = MICRON_V_ACTIMB_200; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; } else { /* 512MB DDR */ - *mcfg = NUMONYX_V_MCFG_165(512 << 20); - *ctrla = NUMONYX_V_ACTIMA_165; - *ctrlb = NUMONYX_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = NUMONYX_V_MCFG_165(512 << 20); + timings->ctrla = NUMONYX_V_ACTIMA_165; + timings->ctrlb = NUMONYX_V_ACTIMB_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; } break; default: /* Assume 128MB and Micron/165MHz timings to be safe */ - *mcfg = MICRON_V_MCFG_165(128 << 20); - *ctrla = MICRON_V_ACTIMA_165; - *ctrlb = MICRON_V_ACTIMB_165; - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = MICRON_V_MCFG_165(128 << 20); + timings->ctrla = MICRON_V_ACTIMA_165; + timings->ctrlb = MICRON_V_ACTIMB_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; } } #endif diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c index 61fc7b5..8a3aa0c 100644 --- a/board/ti/evm/evm.c +++ b/board/ti/evm/evm.c @@ -128,8 +128,7 @@ int board_init(void) * provides the timing values back to the function that configures * the memory. */ -void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, - u32 *mr) +void get_board_mem_timings(struct board_sdrc_timings *timings) { int pop_mfr, pop_id; @@ -142,17 +141,17 @@ void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, if (pop_mfr == NAND_MFR_HYNIX && pop_id == 0xbc) { /* 256MB DDR */ - *mcfg = HYNIX_V_MCFG_200(256 << 20); - *ctrla = HYNIX_V_ACTIMA_200; - *ctrlb = HYNIX_V_ACTIMB_200; + timings->mcfg = HYNIX_V_MCFG_200(256 << 20); + timings->ctrla = HYNIX_V_ACTIMA_200; + timings->ctrlb = HYNIX_V_ACTIMB_200; } else { /* 128MB DDR */ - *mcfg = MICRON_V_MCFG_165(128 << 20); - *ctrla = MICRON_V_ACTIMA_165; - *ctrlb = MICRON_V_ACTIMB_165; + timings->mcfg = MICRON_V_MCFG_165(128 << 20); + timings->ctrla = MICRON_V_ACTIMA_165; + timings->ctrlb = MICRON_V_ACTIMB_165; } - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; - *mr = MICRON_V_MR_165; + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mr = MICRON_V_MR_165; } #endif diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c index 35f5e15..85685ee 100644 --- a/board/timll/devkit8000/devkit8000.c +++ b/board/timll/devkit8000/devkit8000.c @@ -188,16 +188,15 @@ int spl_start_uboot(void) * provides the timing values back to the function that configures * the memory. We have either one or two banks of 128MB DDR. */ -void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl, - u32 *mr) +void get_board_mem_timings(struct board_sdrc_timings *timings) { /* General SDRC config */ - *mcfg = MICRON_V_MCFG_165(128 << 20); - *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; + timings->mcfg = MICRON_V_MCFG_165(128 << 20); + timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; /* AC timings */ - *ctrla = MICRON_V_ACTIMA_165; - *ctrlb = MICRON_V_ACTIMB_165; + timings->ctrla = MICRON_V_ACTIMA_165; + timings->ctrlb = MICRON_V_ACTIMB_165; - *mr = MICRON_V_MR_165; + timings->mr = MICRON_V_MR_165; } diff --git a/common/Makefile b/common/Makefile index c29a7d8..54fcc81 100644 --- a/common/Makefile +++ b/common/Makefile @@ -30,6 +30,7 @@ ifndef CONFIG_SPL_BUILD COBJS-y += main.o COBJS-y += command.o COBJS-y += exports.o +COBJS-y += hash.o COBJS-$(CONFIG_SYS_HUSH_PARSER) += hush.o COBJS-y += s_record.o COBJS-y += xyzModem.o @@ -43,7 +44,10 @@ COBJS-y += cmd_nvedit.o COBJS-y += cmd_version.o # environment +COBJS-y += env_attr.o +COBJS-y += env_callback.o COBJS-y += env_common.o +COBJS-y += env_flags.o COBJS-$(CONFIG_ENV_IS_IN_DATAFLASH) += env_dataflash.o COBJS-$(CONFIG_ENV_IS_IN_EEPROM) += env_eeprom.o XCOBJS-$(CONFIG_ENV_IS_EMBEDDED) += env_embedded.o @@ -75,6 +79,7 @@ COBJS-$(CONFIG_CMD_CONSOLE) += cmd_console.o COBJS-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o COBJS-$(CONFIG_CMD_DATE) += cmd_date.o +COBJS-$(CONFIG_CMD_SOUND) += cmd_sound.o ifdef CONFIG_4xx COBJS-$(CONFIG_CMD_SETGETDCR) += cmd_dcr.o endif @@ -100,8 +105,10 @@ ifdef CONFIG_FPGA COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o endif COBJS-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o +COBJS-$(CONFIG_CMD_GETTIME) += cmd_gettime.o COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o +COBJS-$(CONFIG_CMD_HASH) += cmd_hash.o COBJS-$(CONFIG_CMD_IDE) += cmd_ide.o COBJS-$(CONFIG_CMD_IMMAP) += cmd_immap.o COBJS-$(CONFIG_CMD_INI) += cmd_ini.o @@ -117,6 +124,7 @@ COBJS-$(CONFIG_LOGBUFFER) += cmd_log.o COBJS-$(CONFIG_ID_EEPROM) += cmd_mac.o COBJS-$(CONFIG_CMD_MD5SUM) += cmd_md5sum.o COBJS-$(CONFIG_CMD_MEMORY) += cmd_mem.o +COBJS-$(CONFIG_CMD_IO) += cmd_io.o COBJS-$(CONFIG_CMD_MFSL) += cmd_mfsl.o COBJS-$(CONFIG_MII) += miiphyutil.o COBJS-$(CONFIG_CMD_MII) += miiphyutil.o @@ -141,6 +149,7 @@ endif COBJS-y += cmd_pcmcia.o COBJS-$(CONFIG_CMD_PORTIO) += cmd_portio.o COBJS-$(CONFIG_CMD_PXE) += cmd_pxe.o +COBJS-$(CONFIG_CMD_READ) += cmd_read.o COBJS-$(CONFIG_CMD_REGINFO) += cmd_reginfo.o COBJS-$(CONFIG_CMD_REISER) += cmd_reiser.o COBJS-$(CONFIG_CMD_SATA) += cmd_sata.o @@ -184,6 +193,7 @@ COBJS-$(CONFIG_BOOTSTAGE) += bootstage.o COBJS-$(CONFIG_CONSOLE_MUX) += iomux.o COBJS-y += flash.o COBJS-$(CONFIG_CMD_KGDB) += kgdb.o kgdb_stubs.o +COBJS-$(CONFIG_I2C_EDID) += edid.o COBJS-$(CONFIG_KALLSYMS) += kallsyms.o COBJS-$(CONFIG_LCD) += lcd.o COBJS-$(CONFIG_LYNXKDI) += lynxkdi.o @@ -192,6 +202,7 @@ COBJS-$(CONFIG_MODEM_SUPPORT) += modem.o COBJS-$(CONFIG_UPDATE_TFTP) += update.o COBJS-$(CONFIG_USB_KEYBOARD) += usb_kbd.o COBJS-$(CONFIG_CMD_DFU) += cmd_dfu.o +COBJS-$(CONFIG_CMD_GPT) += cmd_gpt.o endif ifdef CONFIG_SPL_BUILD @@ -200,7 +211,10 @@ COBJS-y += env_common.o COBJS-$(CONFIG_ENV_IS_IN_FLASH) += env_flash.o COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o COBJS-$(CONFIG_SPL_NET_SUPPORT) += cmd_nvedit.o +COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_attr.o +COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_callback.o COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_common.o +COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_flags.o COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_nowhere.o COBJS-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o endif diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c index 4dbe952..f7595c0 100644 --- a/common/cmd_bootm.c +++ b/common/cmd_bootm.c @@ -537,7 +537,7 @@ static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc, } break; #endif -#if defined(CONFIG_OF_LIBFDT) +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_LMB) case BOOTM_STATE_FDT: { boot_fdt_add_mem_rsv_regions(&images.lmb, diff --git a/common/cmd_gettime.c b/common/cmd_gettime.c new file mode 100644 index 0000000..d7d36a9 --- /dev/null +++ b/common/cmd_gettime.c @@ -0,0 +1,56 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. All rights reserved. + * + * Copyright (c) 2009, Code Aurora Forum. All rights reserved. + * + * (C) Copyright 2001 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Get Timer overflows after 2^32 / CONFIG_SYS_HZ (32Khz) = 131072 sec + */ +#include <common.h> +#include <command.h> + +static int do_gettime(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + unsigned long int val = get_timer(0); + +#ifdef CONFIG_SYS_HZ + printf("Timer val: %lu\n", val); + printf("Seconds : %lu\n", val / CONFIG_SYS_HZ); + printf("Remainder : %lu\n", val % CONFIG_SYS_HZ); + printf("sys_hz = %lu\n", (unsigned long int)CONFIG_SYS_HZ); +#else + printf("CONFIG_SYS_HZ not defined"); + printf("Timer Val %lu", val); +#endif + + return 0; +} + +U_BOOT_CMD( + gettime, 1, 1, do_gettime, + "get timer val elapsed,\n", + "get time elapsed from uboot start\n" +); diff --git a/common/cmd_gpt.c b/common/cmd_gpt.c new file mode 100644 index 0000000..da7705d --- /dev/null +++ b/common/cmd_gpt.c @@ -0,0 +1,333 @@ +/* + * cmd_gpt.c -- GPT (GUID Partition Table) handling command + * + * Copyright (C) 2012 Samsung Electronics + * author: Lukasz Majewski <l.majewski@samsung.com> + * author: Piotr Wilczek <p.wilczek@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <command.h> +#include <mmc.h> +#include <part_efi.h> +#include <exports.h> +#include <linux/ctype.h> + +#ifndef CONFIG_PARTITION_UUIDS +#error CONFIG_PARTITION_UUIDS must be enabled for CONFIG_CMD_GPT to be enabled +#endif + +/** + * extract_env(): Expand env name from string format '&{env_name}' + * and return pointer to the env (if the env is set) + * + * @param str - pointer to string + * @param env - pointer to pointer to extracted env + * + * @return - zero on successful expand and env is set + */ +static char extract_env(const char *str, char **env) +{ + char *e, *s; + + if (!str || strlen(str) < 4) + return -1; + + if ((strncmp(str, "${", 2) == 0) && (str[strlen(str) - 1] == '}')) { + s = strdup(str); + if (s == NULL) + return -1; + memset(s + strlen(s) - 1, '\0', 1); + memmove(s, s + 2, strlen(s) - 1); + e = getenv(s); + free(s); + if (e == NULL) { + printf("Environmental '%s' not set\n", str); + return -1; /* env not set */ + } + *env = e; + return 0; + } + + return -1; +} + +/** + * extract_val(): Extract value from a key=value pair list (comma separated). + * Only value for the given key is returend. + * Function allocates memory for the value, remember to free! + * + * @param str - pointer to string with key=values pairs + * @param key - pointer to the key to search for + * + * @return - pointer to allocated string with the value + */ +static char *extract_val(const char *str, const char *key) +{ + char *v, *k; + char *s, *strcopy; + char *new = NULL; + + strcopy = strdup(str); + if (strcopy == NULL) + return NULL; + + s = strcopy; + while (s) { + v = strsep(&s, ","); + if (!v) + break; + k = strsep(&v, "="); + if (!k) + break; + if (strcmp(k, key) == 0) { + new = strdup(v); + break; + } + } + + free(strcopy); + + return new; +} + +/** + * set_gpt_info(): Fill partition information from string + * function allocates memory, remember to free! + * + * @param dev_desc - pointer block device descriptor + * @param str_part - pointer to string with partition information + * @param str_disk_guid - pointer to pointer to allocated string with disk guid + * @param partitions - pointer to pointer to allocated partitions array + * @param parts_count - number of partitions + * + * @return - zero on success, otherwise error + * + */ +static int set_gpt_info(block_dev_desc_t *dev_desc, + const char *str_part, + char **str_disk_guid, + disk_partition_t **partitions, + u8 *parts_count) +{ + char *tok, *str, *s; + int i; + char *val, *p; + int p_count; + disk_partition_t *parts; + int errno = 0; + + debug("%s: MMC lba num: 0x%x %d\n", __func__, + (unsigned int)dev_desc->lba, (unsigned int)dev_desc->lba); + + if (str_part == NULL) + return -1; + + str = strdup(str_part); + + /* extract disk guid */ + s = str; + tok = strsep(&s, ";"); + val = extract_val(tok, "uuid_disk"); + if (!val) { + free(str); + return -2; + } + if (extract_env(val, &p)) + p = val; + *str_disk_guid = strdup(p); + free(val); + + if (strlen(s) == 0) + return -3; + + i = strlen(s) - 1; + if (s[i] == ';') + s[i] = '\0'; + + /* calculate expected number of partitions */ + p_count = 1; + p = s; + while (*p) { + if (*p++ == ';') + p_count++; + } + + /* allocate memory for partitions */ + parts = calloc(sizeof(disk_partition_t), p_count); + + /* retrive partions data from string */ + for (i = 0; i < p_count; i++) { + tok = strsep(&s, ";"); + + if (tok == NULL) + break; + + /* uuid */ + val = extract_val(tok, "uuid"); + if (!val) { /* 'uuid' is mandatory */ + errno = -4; + goto err; + } + if (extract_env(val, &p)) + p = val; + if (strlen(p) >= sizeof(parts[i].uuid)) { + printf("Wrong uuid format for partition %d\n", i); + errno = -4; + goto err; + } + strcpy((char *)parts[i].uuid, p); + free(val); + + /* name */ + val = extract_val(tok, "name"); + if (!val) { /* name is mandatory */ + errno = -4; + goto err; + } + if (extract_env(val, &p)) + p = val; + if (strlen(p) >= sizeof(parts[i].name)) { + errno = -4; + goto err; + } + strcpy((char *)parts[i].name, p); + free(val); + + /* size */ + val = extract_val(tok, "size"); + if (!val) { /* 'size' is mandatory */ + errno = -4; + goto err; + } + if (extract_env(val, &p)) + p = val; + parts[i].size = ustrtoul(p, &p, 0); + parts[i].size /= dev_desc->blksz; + free(val); + + /* start address */ + val = extract_val(tok, "start"); + if (val) { /* start address is optional */ + if (extract_env(val, &p)) + p = val; + parts[i].start = ustrtoul(p, &p, 0); + parts[i].start /= dev_desc->blksz; + free(val); + } + } + + *parts_count = p_count; + *partitions = parts; + free(str); + + return 0; +err: + free(str); + free(*str_disk_guid); + free(parts); + + return errno; +} + +static int gpt_mmc_default(int dev, const char *str_part) +{ + int ret; + char *str_disk_guid; + u8 part_count = 0; + disk_partition_t *partitions = NULL; + + struct mmc *mmc = find_mmc_device(dev); + + if (mmc == NULL) { + printf("%s: mmc dev %d NOT available\n", __func__, dev); + return CMD_RET_FAILURE; + } + + if (!str_part) + return -1; + + /* fill partitions */ + ret = set_gpt_info(&mmc->block_dev, str_part, + &str_disk_guid, &partitions, &part_count); + if (ret) { + if (ret == -1) + printf("No partition list provided\n"); + if (ret == -2) + printf("Missing disk guid\n"); + if ((ret == -3) || (ret == -4)) + printf("Partition list incomplete\n"); + return -1; + } + + /* save partitions layout to disk */ + gpt_restore(&mmc->block_dev, str_disk_guid, partitions, part_count); + free(str_disk_guid); + free(partitions); + + return 0; +} + +/** + * do_gpt(): Perform GPT operations + * + * @param cmdtp - command name + * @param flag + * @param argc + * @param argv + * + * @return zero on success; otherwise error + */ +static int do_gpt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + int ret = CMD_RET_SUCCESS; + int dev = 0; + char *pstr; + + if (argc < 5) + return CMD_RET_USAGE; + + /* command: 'write' */ + if ((strcmp(argv[1], "write") == 0) && (argc == 5)) { + /* device: 'mmc' */ + if (strcmp(argv[2], "mmc") == 0) { + /* check if 'dev' is a number */ + for (pstr = argv[3]; *pstr != '\0'; pstr++) + if (!isdigit(*pstr)) { + printf("'%s' is not a number\n", + argv[3]); + return CMD_RET_USAGE; + } + dev = (int)simple_strtoul(argv[3], NULL, 10); + /* write to mmc */ + if (gpt_mmc_default(dev, argv[4])) + return CMD_RET_FAILURE; + } + } else { + return CMD_RET_USAGE; + } + return ret; +} + +U_BOOT_CMD(gpt, CONFIG_SYS_MAXARGS, 1, do_gpt, + "GUID Partition Table", + "<command> <interface> <dev> <partions_list>\n" + " - GUID partition table restoration\n" + " Restore GPT information on a device connected\n" + " to interface\n" +); diff --git a/common/cmd_hash.c b/common/cmd_hash.c new file mode 100644 index 0000000..689c608 --- /dev/null +++ b/common/cmd_hash.c @@ -0,0 +1,63 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * (C) Copyright 2011 + * Joe Hershberger, National Instruments, joe.hershberger@ni.com + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <hash.h> + +static int do_hash(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ +#ifdef CONFIG_HASH_VERIFY + int verify = 0; + + if (!strcmp(argv[1], "-v")) { + verify = 1; + argc--; + argv++; + } +#endif + /* Move forward to 'algorithm' parameter */ + argc--; + argv++; + return hash_command(*argv, verify, cmdtp, flag, argc - 1, argv + 1); +} + +#ifdef CONFIG_HASH_VERIFY +U_BOOT_CMD( + hash, 6, 1, do_hash, + "compute hash message digest", + "algorithm address count [[*]sum_dest]\n" + " - compute message digest [save to env var / *address]\n" + "hash -v algorithm address count [*]sum\n" + " - verify hash of memory area with env var / *address" +); +#else +U_BOOT_CMD( + hash, 5, 1, do_hash, + "compute message digest", + "algorithm address count [[*]sum_dest]\n" + " - compute message digest [save to env var / *address]" +); +#endif diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 4438db5..4380794 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -78,10 +78,12 @@ #include <common.h> #include <command.h> +#include <edid.h> #include <environment.h> #include <i2c.h> #include <malloc.h> #include <asm/byteorder.h> +#include <linux/compiler.h> /* Display values from last command. * Memory modify remembered values are different from display memory. @@ -132,35 +134,65 @@ DECLARE_GLOBAL_DATA_PTR; #define DISP_LINE_LEN 16 -/* implement possible board specific board init */ -static void __def_i2c_init_board(void) +/** + * i2c_init_board() - Board-specific I2C bus init + * + * This function is the default no-op implementation of I2C bus + * initialization. This function can be overriden by board-specific + * implementation if needed. + */ +__weak +void i2c_init_board(void) { return; } -void i2c_init_board(void) - __attribute__((weak, alias("__def_i2c_init_board"))); /* TODO: Implement architecture-specific get/set functions */ -static unsigned int __def_i2c_get_bus_speed(void) + +/** + * i2c_get_bus_speed() - Return I2C bus speed + * + * This function is the default implementation of function for retrieveing + * the current I2C bus speed in Hz. + * + * A driver implementing runtime switching of I2C bus speed must override + * this function to report the speed correctly. Simple or legacy drivers + * can use this fallback. + * + * Returns I2C bus speed in Hz. + */ +__weak +unsigned int i2c_get_bus_speed(void) { return CONFIG_SYS_I2C_SPEED; } -unsigned int i2c_get_bus_speed(void) - __attribute__((weak, alias("__def_i2c_get_bus_speed"))); -static int __def_i2c_set_bus_speed(unsigned int speed) +/** + * i2c_set_bus_speed() - Configure I2C bus speed + * @speed: Newly set speed of the I2C bus in Hz + * + * This function is the default implementation of function for setting + * the I2C bus speed in Hz. + * + * A driver implementing runtime switching of I2C bus speed must override + * this function to report the speed correctly. Simple or legacy drivers + * can use this fallback. + * + * Returns zero on success, negative value on error. + */ +__weak +int i2c_set_bus_speed(unsigned int speed) { if (speed != CONFIG_SYS_I2C_SPEED) return -1; return 0; } -int i2c_set_bus_speed(unsigned int) - __attribute__((weak, alias("__def_i2c_set_bus_speed"))); -/* - * get_alen: small parser helper function to get address length - * returns the address length +/** + * get_alen() - Small parser helper function to get address length + * + * Returns the address length. */ static uint get_alen(char *arg) { @@ -178,11 +210,19 @@ static uint get_alen(char *arg) return alen; } -/* +/** + * do_i2c_read() - Handle the "i2c read" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Returns zero on success, CMD_RET_USAGE in case of misuse and negative + * on error. + * * Syntax: * i2c read {i2c_chip} {devaddr}{.0, .1, .2} {len} {memaddr} */ - static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { u_char chip; @@ -271,7 +311,16 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ return 0; } -/* +/** + * do_i2c_md() - Handle the "i2c md" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Returns zero on success, CMD_RET_USAGE in case of misuse and negative + * on error. + * * Syntax: * i2c md {i2c_chip} {addr}{.0, .1, .2} {len} */ @@ -363,8 +412,15 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] return 0; } - -/* Write (fill) memory +/** + * do_i2c_mw() - Handle the "i2c mw" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Returns zero on success, CMD_RET_USAGE in case of misuse and negative + * on error. * * Syntax: * i2c mw {i2c_chip} {addr}{.0, .1, .2} {data} [{count}] @@ -421,10 +477,20 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] #endif } - return (0); + return 0; } -/* Calculate a CRC on memory +/** + * do_i2c_crc() - Handle the "i2c crc32" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Calculate a CRC on memory + * + * Returns zero on success, CMD_RET_USAGE in case of misuse and negative + * on error. * * Syntax: * i2c crc32 {i2c_chip} {addr}{.0, .1, .2} {count} @@ -481,13 +547,22 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] return 0; } -/* Modify memory. +/** + * mod_i2c_mem() - Handle the "i2c mm" and "i2c nm" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Modify memory. + * + * Returns zero on success, CMD_RET_USAGE in case of misuse and negative + * on error. * * Syntax: * i2c mm{.b, .w, .l} {i2c_chip} {addr}{.0, .1, .2} * i2c nm{.b, .w, .l} {i2c_chip} {addr}{.0, .1, .2} */ - static int mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[]) { @@ -603,7 +678,16 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg return 0; } -/* +/** + * do_i2c_probe() - Handle the "i2c probe" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Returns zero on success, CMD_RET_USAGE in case of misuse and negative + * on error. + * * Syntax: * i2c probe {addr} * @@ -657,7 +741,16 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv return (0 == found); } -/* +/** + * do_i2c_loop() - Handle the "i2c loop" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Returns zero on success, CMD_RET_USAGE in case of misuse and negative + * on error. + * * Syntax: * i2c loop {i2c_chip} {addr}{.0, .1, .2} [{length}] [{delay}] * {length} - Number of bytes to read @@ -718,6 +811,8 @@ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] /* * The SDRAM command is separately configured because many * (most?) embedded boards don't use SDRAM DIMMs. + * + * FIXME: Document and probably move elsewhere! */ #if defined(CONFIG_CMD_SDRAM) static void print_ddr2_tcyc (u_char const b) @@ -1246,7 +1341,48 @@ static int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) } #endif +/* + * Syntax: + * i2c edid {i2c_chip} + */ +#if defined(CONFIG_I2C_EDID) +int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + u_char chip; + struct edid1_info edid; + + if (argc < 2) { + cmd_usage(cmdtp); + return 1; + } + + chip = simple_strtoul(argv[1], NULL, 16); + if (i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid)) != 0) { + puts("Error reading EDID content.\n"); + return 1; + } + + if (edid_check_info(&edid)) { + puts("Content isn't valid EDID.\n"); + return 1; + } + + edid_print_info(&edid); + return 0; + +} +#endif /* CONFIG_I2C_EDID */ + #if defined(CONFIG_I2C_MUX) +/** + * do_i2c_add_bus() - Handle the "i2c bus" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Returns zero always. + */ static int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { int ret=0; @@ -1276,6 +1412,16 @@ static int do_i2c_add_bus(cmd_tbl_t * cmdtp, int flag, int argc, char * const ar #endif /* CONFIG_I2C_MUX */ #if defined(CONFIG_I2C_MULTI_BUS) +/** + * do_i2c_bus_num() - Handle the "i2c dev" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Returns zero on success, CMD_RET_USAGE in case of misuse and negative + * on error. + */ static int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { int bus_idx, ret=0; @@ -1294,6 +1440,16 @@ static int do_i2c_bus_num(cmd_tbl_t * cmdtp, int flag, int argc, char * const ar } #endif /* CONFIG_I2C_MULTI_BUS */ +/** + * do_i2c_bus_speed() - Handle the "i2c speed" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Returns zero on success, CMD_RET_USAGE in case of misuse and negative + * on error. + */ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { int speed, ret=0; @@ -1311,16 +1467,45 @@ static int do_i2c_bus_speed(cmd_tbl_t * cmdtp, int flag, int argc, char * const return ret; } +/** + * do_i2c_mm() - Handle the "i2c mm" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Returns zero on success, CMD_RET_USAGE in case of misuse and negative + * on error. + */ static int do_i2c_mm(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { return mod_i2c_mem (cmdtp, 1, flag, argc, argv); } +/** + * do_i2c_nm() - Handle the "i2c nm" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Returns zero on success, CMD_RET_USAGE in case of misuse and negative + * on error. + */ static int do_i2c_nm(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { return mod_i2c_mem (cmdtp, 0, flag, argc, argv); } +/** + * do_i2c_reset() - Handle the "i2c reset" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Returns zero always. + */ static int do_i2c_reset(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); @@ -1335,6 +1520,9 @@ static cmd_tbl_t cmd_i2c_sub[] = { #if defined(CONFIG_I2C_MULTI_BUS) U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""), #endif /* CONFIG_I2C_MULTI_BUS */ +#if defined(CONFIG_I2C_EDID) + U_BOOT_CMD_MKENT(edid, 1, 1, do_edid, "", ""), +#endif /* CONFIG_I2C_EDID */ U_BOOT_CMD_MKENT(loop, 3, 1, do_i2c_loop, "", ""), U_BOOT_CMD_MKENT(md, 3, 1, do_i2c_md, "", ""), U_BOOT_CMD_MKENT(mm, 2, 1, do_i2c_mm, "", ""), @@ -1356,6 +1544,16 @@ void i2c_reloc(void) { } #endif +/** + * do_i2c() - Handle the "i2c" command-line command + * @cmdtp: Command data struct pointer + * @flag: Command flag + * @argc: Command-line argument count + * @argv: Array of command-line arguments + * + * Returns zero on success, CMD_RET_USAGE in case of misuse and negative + * on error. + */ static int do_i2c(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { cmd_tbl_t *c; @@ -1385,6 +1583,9 @@ static char i2c_help_text[] = #if defined(CONFIG_I2C_MULTI_BUS) "i2c dev [dev] - show or set current I2C bus\n" #endif /* CONFIG_I2C_MULTI_BUS */ +#if defined(CONFIG_I2C_EDID) + "i2c edid chip - print EDID configuration information\n" +#endif /* CONFIG_I2C_EDID */ "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n" "i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n" "i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n" diff --git a/common/cmd_io.c b/common/cmd_io.c new file mode 100644 index 0000000..6450cb5 --- /dev/null +++ b/common/cmd_io.c @@ -0,0 +1,93 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * IO space access commands. + */ + +#include <common.h> +#include <command.h> +#include <asm/io.h> + +/* + * IO Display + * + * Syntax: + * iod{.b, .w, .l} {addr} + */ +int do_io_iod(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + ulong addr; + int size; + + if (argc != 2) + return CMD_RET_USAGE; + + size = cmd_get_data_size(argv[0], 4); + if (size < 0) + return 1; + + addr = simple_strtoul(argv[1], NULL, 16); + + printf("%04x: ", (u16) addr); + + if (size == 4) + printf("%08x\n", inl(addr)); + else if (size == 2) + printf("%04x\n", inw(addr)); + else + printf("%02x\n", inb(addr)); + + return 0; +} + +int do_io_iow(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + ulong addr, size, val; + + if (argc != 3) + return CMD_RET_USAGE; + + size = cmd_get_data_size(argv[0], 4); + if (size < 0) + return 1; + + addr = simple_strtoul(argv[1], NULL, 16); + val = simple_strtoul(argv[2], NULL, 16); + + if (size == 4) + outl((u32) val, addr); + else if (size == 2) + outw((u16) val, addr); + else + outb((u8) val, addr); + + return 0; +} + +/**************************************************/ +U_BOOT_CMD(iod, 2, 0, do_io_iod, + "IO space display", "[.b, .w, .l] address [# of objects]"); + +U_BOOT_CMD(iow, 3, 0, do_io_iow, + "IO space modify (auto-incrementing address)", + "[.b, .w, .l] address"); diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c index 006131f..7633f0c 100644 --- a/common/cmd_nvedit.c +++ b/common/cmd_nvedit.c @@ -47,12 +47,8 @@ #include <errno.h> #include <malloc.h> #include <watchdog.h> -#include <serial.h> #include <linux/stddef.h> #include <asm/byteorder.h> -#if defined(CONFIG_CMD_NET) -#include <net.h> -#endif DECLARE_GLOBAL_DATA_PTR; @@ -76,16 +72,6 @@ SPI_FLASH|NVRAM|MMC|FAT|REMOTE} or CONFIG_ENV_IS_NOWHERE */ #define MAX_ENV_SIZE (1 << 20) /* 1 MiB */ -ulong load_addr = CONFIG_SYS_LOAD_ADDR; /* Default Load Address */ -ulong save_addr; /* Default Save Address */ -ulong save_size; /* Default Save Size (in bytes) */ - -/* - * Table with supported baudrates (defined in config_xyz.h) - */ -static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE; -#define N_BAUDRATES (sizeof(baudrate_table) / sizeof(baudrate_table[0])) - /* * This variable is incremented on each do_env_set(), so it can * be used via get_env_id() as an indication, if the environment @@ -106,7 +92,7 @@ int get_env_id(void) * * Returns 0 in case of error, or length of printed string */ -static int env_print(char *name) +static int env_print(char *name, int flag) { char *res = NULL; size_t len; @@ -116,7 +102,7 @@ static int env_print(char *name) e.key = name; e.data = NULL; - hsearch_r(e, FIND, &ep, &env_htab); + hsearch_r(e, FIND, &ep, &env_htab, flag); if (ep == NULL) return 0; len = printf("%s=%s\n", ep->key, ep->data); @@ -124,7 +110,7 @@ static int env_print(char *name) } /* print whole list */ - len = hexport_r(&env_htab, '\n', &res, 0, 0, NULL); + len = hexport_r(&env_htab, '\n', flag, &res, 0, 0, NULL); if (len > 0) { puts(res); @@ -141,10 +127,17 @@ static int do_env_print(cmd_tbl_t *cmdtp, int flag, int argc, { int i; int rcode = 0; + int env_flag = H_HIDE_DOT; + + if (argc > 1 && argv[1][0] == '-' && argv[1][1] == 'a') { + argc--; + argv++; + env_flag &= ~H_HIDE_DOT; + } if (argc == 1) { /* print all env vars */ - rcode = env_print(NULL); + rcode = env_print(NULL, env_flag); if (!rcode) return 1; printf("\nEnvironment size: %d/%ld bytes\n", @@ -153,8 +146,9 @@ static int do_env_print(cmd_tbl_t *cmdtp, int flag, int argc, } /* print selected env vars */ + env_flag &= ~H_HIDE_DOT; for (i = 1; i < argc; ++i) { - int rc = env_print(argv[i]); + int rc = env_print(argv[i], env_flag); if (!rc) { printf("## Error: \"%s\" not defined\n", argv[i]); ++rcode; @@ -198,137 +192,32 @@ static int do_env_grep(cmd_tbl_t *cmdtp, int flag, #endif /* CONFIG_SPL_BUILD */ /* - * Perform consistency checking before setting, replacing, or deleting an - * environment variable, then (if successful) apply the changes to internals so - * to make them effective. Code for this function was taken out of - * _do_env_set(), which now calls it instead. - * Also called as a callback function by himport_r(). - * Returns 0 in case of success, 1 in case of failure. - * When (flag & H_FORCE) is set, do not print out any error message and force - * overwriting of write-once variables. - */ - -int env_check_apply(const char *name, const char *oldval, - const char *newval, int flag) -{ - int console = -1; - - /* Default value for NULL to protect string-manipulating functions */ - newval = newval ? : ""; - - /* Check for console redirection */ - if (strcmp(name, "stdin") == 0) - console = stdin; - else if (strcmp(name, "stdout") == 0) - console = stdout; - else if (strcmp(name, "stderr") == 0) - console = stderr; - - if (console != -1) { - if ((newval == NULL) || (*newval == '\0')) { - /* We cannot delete stdin/stdout/stderr */ - if ((flag & H_FORCE) == 0) - printf("Can't delete \"%s\"\n", name); - return 1; - } - -#ifdef CONFIG_CONSOLE_MUX - if (iomux_doenv(console, newval)) - return 1; -#else - /* Try assigning specified device */ - if (console_assign(console, newval) < 0) - return 1; -#endif /* CONFIG_CONSOLE_MUX */ - } - - /* - * Some variables like "ethaddr" and "serial#" can be set only once and - * cannot be deleted, unless CONFIG_ENV_OVERWRITE is defined. - */ -#ifndef CONFIG_ENV_OVERWRITE - if (oldval != NULL && /* variable exists */ - (flag & H_FORCE) == 0) { /* and we are not forced */ - if (strcmp(name, "serial#") == 0 || - (strcmp(name, "ethaddr") == 0 -#if defined(CONFIG_OVERWRITE_ETHADDR_ONCE) && defined(CONFIG_ETHADDR) - && strcmp(oldval, __stringify(CONFIG_ETHADDR)) != 0 -#endif /* CONFIG_OVERWRITE_ETHADDR_ONCE && CONFIG_ETHADDR */ - )) { - printf("Can't overwrite \"%s\"\n", name); - return 1; - } - } -#endif - /* - * When we change baudrate, or we are doing an env default -a - * (which will erase all variables prior to calling this), - * we want the baudrate to actually change - for real. - */ - if (oldval != NULL || /* variable exists */ - (flag & H_NOCLEAR) == 0) { /* or env is clear */ - /* - * Switch to new baudrate if new baudrate is supported - */ - if (strcmp(name, "baudrate") == 0) { - int baudrate = simple_strtoul(newval, NULL, 10); - int i; - for (i = 0; i < N_BAUDRATES; ++i) { - if (baudrate == baudrate_table[i]) - break; - } - if (i == N_BAUDRATES) { - if ((flag & H_FORCE) == 0) - printf("## Baudrate %d bps not " - "supported\n", baudrate); - return 1; - } - if (gd->baudrate == baudrate) { - /* If unchanged, we just say it's OK */ - return 0; - } - printf("## Switch baudrate to %d bps and" - "press ENTER ...\n", baudrate); - udelay(50000); - gd->baudrate = baudrate; -#if defined(CONFIG_PPC) || defined(CONFIG_MCF52x2) - gd->bd->bi_baudrate = baudrate; -#endif - - serial_setbrg(); - udelay(50000); - while (getc() != '\r') - ; - } - } - - /* - * Some variables should be updated when the corresponding - * entry in the environment is changed - */ - if (strcmp(name, "loadaddr") == 0) { - load_addr = simple_strtoul(newval, NULL, 16); - return 0; - } -#if defined(CONFIG_CMD_NET) - else if (strcmp(name, "bootfile") == 0) { - copy_filename(BootFile, newval, sizeof(BootFile)); - return 0; - } -#endif - return 0; -} - -/* * Set a new environment variable, * or replace or delete an existing one. -*/ + */ static int _do_env_set(int flag, int argc, char * const argv[]) { int i, len; char *name, *value, *s; ENTRY e, *ep; + int env_flag = H_INTERACTIVE; + + debug("Initial value for argc=%d\n", argc); + while (argc > 1 && **(argv + 1) == '-') { + char *arg = *++argv; + --argc; + while (*++arg) { + switch (*arg) { + case 'f': /* force */ + env_flag |= H_FORCE; + break; + default: + return CMD_RET_USAGE; + } + } + } + debug("Final value for argc=%d\n", argc); name = argv[1]; value = argv[2]; @@ -339,25 +228,10 @@ static int _do_env_set(int flag, int argc, char * const argv[]) } env_id++; - /* - * search if variable with this name already exists - */ - e.key = name; - e.data = NULL; - hsearch_r(e, FIND, &ep, &env_htab); - - /* - * Perform requested checks. Notice how since we are overwriting - * a single variable, we need to set H_NOCLEAR - */ - if (env_check_apply(name, ep ? ep->data : NULL, value, H_NOCLEAR)) { - debug("check function did not approve, refusing\n"); - return 1; - } /* Delete only ? */ if (argc < 3 || argv[2] == NULL) { - int rc = hdelete_r(name, &env_htab, 0); + int rc = hdelete_r(name, &env_htab, env_flag); return !rc; } @@ -384,7 +258,7 @@ static int _do_env_set(int flag, int argc, char * const argv[]) e.key = name; e.data = value; - hsearch_r(e, ENTER, &ep, &env_htab); + hsearch_r(e, ENTER, &ep, &env_htab, env_flag); free(value); if (!ep) { printf("## Error inserting \"%s\" variable, errno=%d\n", @@ -511,6 +385,153 @@ int do_env_ask(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } #endif +#if defined(CONFIG_CMD_ENV_CALLBACK) +static int print_static_binding(const char *var_name, const char *callback_name) +{ + printf("\t%-20s %-20s\n", var_name, callback_name); + + return 0; +} + +static int print_active_callback(ENTRY *entry) +{ + struct env_clbk_tbl *clbkp; + int i; + int num_callbacks; + + if (entry->callback == NULL) + return 0; + + /* look up the callback in the linker-list */ + num_callbacks = ll_entry_count(struct env_clbk_tbl, env_clbk); + for (i = 0, clbkp = ll_entry_start(struct env_clbk_tbl, env_clbk); + i < num_callbacks; + i++, clbkp++) { +#if defined(CONFIG_NEEDS_MANUAL_RELOC) + if (entry->callback == clbkp->callback + gd->reloc_off) +#else + if (entry->callback == clbkp->callback) +#endif + break; + } + + if (i == num_callbacks) + /* this should probably never happen, but just in case... */ + printf("\t%-20s %p\n", entry->key, entry->callback); + else + printf("\t%-20s %-20s\n", entry->key, clbkp->name); + + return 0; +} + +/* + * Print the callbacks available and what they are bound to + */ +int do_env_callback(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + struct env_clbk_tbl *clbkp; + int i; + int num_callbacks; + + /* Print the available callbacks */ + puts("Available callbacks:\n"); + puts("\tCallback Name\n"); + puts("\t-------------\n"); + num_callbacks = ll_entry_count(struct env_clbk_tbl, env_clbk); + for (i = 0, clbkp = ll_entry_start(struct env_clbk_tbl, env_clbk); + i < num_callbacks; + i++, clbkp++) + printf("\t%s\n", clbkp->name); + puts("\n"); + + /* Print the static bindings that may exist */ + puts("Static callback bindings:\n"); + printf("\t%-20s %-20s\n", "Variable Name", "Callback Name"); + printf("\t%-20s %-20s\n", "-------------", "-------------"); + env_attr_walk(ENV_CALLBACK_LIST_STATIC, print_static_binding); + puts("\n"); + + /* walk through each variable and print the callback if it has one */ + puts("Active callback bindings:\n"); + printf("\t%-20s %-20s\n", "Variable Name", "Callback Name"); + printf("\t%-20s %-20s\n", "-------------", "-------------"); + hwalk_r(&env_htab, print_active_callback); + return 0; +} +#endif + +#if defined(CONFIG_CMD_ENV_FLAGS) +static int print_static_flags(const char *var_name, const char *flags) +{ + enum env_flags_vartype type = env_flags_parse_vartype(flags); + enum env_flags_varaccess access = env_flags_parse_varaccess(flags); + + printf("\t%-20s %-20s %-20s\n", var_name, + env_flags_get_vartype_name(type), + env_flags_get_varaccess_name(access)); + + return 0; +} + +static int print_active_flags(ENTRY *entry) +{ + enum env_flags_vartype type; + enum env_flags_varaccess access; + + if (entry->flags == 0) + return 0; + + type = (enum env_flags_vartype) + (entry->flags & ENV_FLAGS_VARTYPE_BIN_MASK); + access = env_flags_parse_varaccess_from_binflags(entry->flags); + printf("\t%-20s %-20s %-20s\n", entry->key, + env_flags_get_vartype_name(type), + env_flags_get_varaccess_name(access)); + + return 0; +} + +/* + * Print the flags available and what variables have flags + */ +int do_env_flags(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + /* Print the available variable types */ + printf("Available variable type flags (position %d):\n", + ENV_FLAGS_VARTYPE_LOC); + puts("\tFlag\tVariable Type Name\n"); + puts("\t----\t------------------\n"); + env_flags_print_vartypes(); + puts("\n"); + + /* Print the available variable access types */ + printf("Available variable access flags (position %d):\n", + ENV_FLAGS_VARACCESS_LOC); + puts("\tFlag\tVariable Access Name\n"); + puts("\t----\t--------------------\n"); + env_flags_print_varaccess(); + puts("\n"); + + /* Print the static flags that may exist */ + puts("Static flags:\n"); + printf("\t%-20s %-20s %-20s\n", "Variable Name", "Variable Type", + "Variable Access"); + printf("\t%-20s %-20s %-20s\n", "-------------", "-------------", + "---------------"); + env_attr_walk(ENV_FLAGS_LIST_STATIC, print_static_flags); + puts("\n"); + + /* walk through each variable and print the flags if non-default */ + puts("Active flags:\n"); + printf("\t%-20s %-20s %-20s\n", "Variable Name", "Variable Type", + "Variable Access"); + printf("\t%-20s %-20s %-20s\n", "-------------", "-------------", + "---------------"); + hwalk_r(&env_htab, print_active_flags); + return 0; +} +#endif + /* * Interactively edit an environment variable */ @@ -552,7 +573,7 @@ char *getenv(const char *name) e.key = name; e.data = NULL; - hsearch_r(e, FIND, &ep, &env_htab); + hsearch_r(e, FIND, &ep, &env_htab, 0); return ep ? ep->data : NULL; } @@ -704,8 +725,36 @@ static int do_env_default(cmd_tbl_t *cmdtp, int __flag, static int do_env_delete(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - printf("Not implemented yet\n"); - return 0; + int env_flag = H_INTERACTIVE; + int ret = 0; + + debug("Initial value for argc=%d\n", argc); + while (argc > 1 && **(argv + 1) == '-') { + char *arg = *++argv; + + --argc; + while (*++arg) { + switch (*arg) { + case 'f': /* force */ + env_flag |= H_FORCE; + break; + default: + return CMD_RET_USAGE; + } + } + } + debug("Final value for argc=%d\n", argc); + + env_id++; + + while (--argc > 0) { + char *name = *++argv; + + if (!hdelete_r(name, &env_htab, env_flag)) + ret = 1; + } + + return ret; } #ifdef CONFIG_CMD_EXPORTENV @@ -812,7 +861,7 @@ NXTARG: ; argv++; if (sep) { /* export as text file */ - len = hexport_r(&env_htab, sep, &addr, size, argc, argv); + len = hexport_r(&env_htab, sep, 0, &addr, size, argc, argv); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); return 1; @@ -830,7 +879,7 @@ NXTARG: ; else /* export as raw binary data */ res = addr; - len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, argc, argv); + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, argc, argv); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); return 1; @@ -951,7 +1000,7 @@ static int do_env_import(cmd_tbl_t *cmdtp, int flag, } if (himport_r(&env_htab, addr, size, sep, del ? 0 : H_NOCLEAR, - 0, NULL, 0 /* do_apply */) == 0) { + 0, NULL) == 0) { error("Environment import failed: errno = %d\n", errno); return 1; } @@ -974,10 +1023,16 @@ static cmd_tbl_t cmd_env_sub[] = { U_BOOT_CMD_MKENT(ask, CONFIG_SYS_MAXARGS, 1, do_env_ask, "", ""), #endif U_BOOT_CMD_MKENT(default, 1, 0, do_env_default, "", ""), - U_BOOT_CMD_MKENT(delete, 2, 0, do_env_delete, "", ""), + U_BOOT_CMD_MKENT(delete, CONFIG_SYS_MAXARGS, 0, do_env_delete, "", ""), #if defined(CONFIG_CMD_EDITENV) U_BOOT_CMD_MKENT(edit, 2, 0, do_env_edit, "", ""), #endif +#if defined(CONFIG_CMD_ENV_CALLBACK) + U_BOOT_CMD_MKENT(callbacks, 1, 0, do_env_callback, "", ""), +#endif +#if defined(CONFIG_CMD_ENV_FLAGS) + U_BOOT_CMD_MKENT(flags, 1, 0, do_env_flags, "", ""), +#endif #if defined(CONFIG_CMD_EXPORTENV) U_BOOT_CMD_MKENT(export, 4, 0, do_env_export, "", ""), #endif @@ -1028,21 +1083,28 @@ static char env_help_text[] = #if defined(CONFIG_CMD_ASKENV) "ask name [message] [size] - ask for environment variable\nenv " #endif +#if defined(CONFIG_CMD_ENV_CALLBACK) + "callbacks - print callbacks and their associated variables\nenv " +#endif "default [-f] -a - [forcibly] reset default environment\n" "env default [-f] var [...] - [forcibly] reset variable(s) to their default values\n" + "env delete [-f] var [...] - [forcibly] delete variable(s)\n" #if defined(CONFIG_CMD_EDITENV) "env edit name - edit environment variable\n" #endif #if defined(CONFIG_CMD_EXPORTENV) "env export [-t | -b | -c] [-s size] addr [var ...] - export environment\n" #endif +#if defined(CONFIG_CMD_ENV_FLAGS) + "env flags - print variables that have non-default flags\n" +#endif #if defined(CONFIG_CMD_GREPENV) "env grep string [...] - search environment\n" #endif #if defined(CONFIG_CMD_IMPORTENV) "env import [-d] [-t | -b | -c] addr [size] - import environment\n" #endif - "env print [name ...] - print environment\n" + "env print [-a | name ...] - print environment\n" #if defined(CONFIG_CMD_RUN) "env run var [...] - run commands in an environment variable\n" #endif @@ -1074,7 +1136,7 @@ U_BOOT_CMD_COMPLETE( U_BOOT_CMD_COMPLETE( printenv, CONFIG_SYS_MAXARGS, 1, do_env_print, "print environment variables", - "\n - print values of all environment variables\n" + "[-a]\n - print [all] values of all environment variables\n" "printenv name ...\n" " - print value of environment variable 'name'", var_complete @@ -1093,10 +1155,10 @@ U_BOOT_CMD_COMPLETE( U_BOOT_CMD_COMPLETE( setenv, CONFIG_SYS_MAXARGS, 0, do_env_set, "set environment variables", - "name value ...\n" - " - set environment variable 'name' to 'value ...'\n" - "setenv name\n" - " - delete environment variable 'name'", + "[-f] name value ...\n" + " - [forcibly] set environment variable 'name' to 'value ...'\n" + "setenv [-f] name\n" + " - [forcibly] delete environment variable 'name'", var_complete ); diff --git a/common/cmd_read.c b/common/cmd_read.c new file mode 100644 index 0000000..f0fc9bf --- /dev/null +++ b/common/cmd_read.c @@ -0,0 +1,81 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. All rights reserved. + * Use of this source code is governed by a BSD-style license that can be + * found in the LICENSE file. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + */ + +#include <common.h> +#include <command.h> +#include <part.h> + +int do_read(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + char *ep; + block_dev_desc_t *dev_desc = NULL; + int dev; + int part = 0; + disk_partition_t part_info; + ulong offset = 0u; + ulong limit = 0u; + void *addr; + uint blk; + uint cnt; + + if (argc != 6) { + cmd_usage(cmdtp); + return 1; + } + + dev = (int)simple_strtoul(argv[2], &ep, 16); + if (*ep) { + if (*ep != ':') { + printf("Invalid block device %s\n", argv[2]); + return 1; + } + part = (int)simple_strtoul(++ep, NULL, 16); + } + + dev_desc = get_dev(argv[1], dev); + if (dev_desc == NULL) { + printf("Block device %s %d not supported\n", argv[1], dev); + return 1; + } + + addr = (void *)simple_strtoul(argv[3], NULL, 16); + blk = simple_strtoul(argv[4], NULL, 16); + cnt = simple_strtoul(argv[5], NULL, 16); + + if (part != 0) { + if (get_partition_info(dev_desc, part, &part_info)) { + printf("Cannot find partition %d\n", part); + return 1; + } + offset = part_info.start; + limit = part_info.size; + } else { + /* Largest address not available in block_dev_desc_t. */ + limit = ~0; + } + + if (cnt + blk > limit) { + printf("Read out of range\n"); + return 1; + } + + if (dev_desc->block_read(dev, offset + blk, cnt, addr) < 0) { + printf("Error reading blocks\n"); + return 1; + } + + return 0; +} + +U_BOOT_CMD( + read, 6, 0, do_read, + "Load binary data from a partition", + "<interface> <dev[:part]> addr blk# cnt" +); diff --git a/common/cmd_sha1sum.c b/common/cmd_sha1sum.c index 8db5456..fe927ab 100644 --- a/common/cmd_sha1sum.c +++ b/common/cmd_sha1sum.c @@ -26,73 +26,11 @@ #include <common.h> #include <command.h> +#include <hash.h> #include <sha1.h> -/* - * Store the resulting sum to an address or variable - */ -static void store_result(const u8 *sum, const char *dest) -{ - unsigned int i; - - if (*dest == '*') { - u8 *ptr; - - ptr = (u8 *)simple_strtoul(dest + 1, NULL, 16); - for (i = 0; i < 20; i++) - *ptr++ = sum[i]; - } else { - char str_output[41]; - char *str_ptr = str_output; - - for (i = 0; i < 20; i++) { - sprintf(str_ptr, "%02x", sum[i]); - str_ptr += 2; - } - str_ptr = '\0'; - setenv(dest, str_output); - } -} - -#ifdef CONFIG_SHA1SUM_VERIFY -static int parse_verify_sum(char *verify_str, u8 *vsum) -{ - if (*verify_str == '*') { - u8 *ptr; - - ptr = (u8 *)simple_strtoul(verify_str + 1, NULL, 16); - memcpy(vsum, ptr, 20); - } else { - unsigned int i; - char *vsum_str; - - if (strlen(verify_str) == 40) - vsum_str = verify_str; - else { - vsum_str = getenv(verify_str); - if (vsum_str == NULL || strlen(vsum_str) != 40) - return 1; - } - - for (i = 0; i < 20; i++) { - char *nullp = vsum_str + (i + 1) * 2; - char end = *nullp; - - *nullp = '\0'; - *(u8 *)(vsum + i) = - simple_strtoul(vsum_str + (i * 2), NULL, 16); - *nullp = end; - } - } - return 0; -} - int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - ulong addr, len; - unsigned int i; - u8 output[20]; - u8 vsum[20]; int verify = 0; int ac; char * const *av; @@ -102,75 +40,16 @@ int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) av = argv + 1; ac = argc - 1; +#ifdef CONFIG_SHA1SUM_VERIFY if (strcmp(*av, "-v") == 0) { verify = 1; av++; ac--; - if (ac < 3) - return CMD_RET_USAGE; } +#endif - addr = simple_strtoul(*av++, NULL, 16); - len = simple_strtoul(*av++, NULL, 16); - - sha1_csum_wd((unsigned char *) addr, len, output, CHUNKSZ_SHA1); - - if (!verify) { - printf("SHA1 for %08lx ... %08lx ==> ", addr, addr + len - 1); - for (i = 0; i < 20; i++) - printf("%02x", output[i]); - printf("\n"); - - if (ac > 2) - store_result(output, *av); - } else { - char *verify_str = *av++; - - if (parse_verify_sum(verify_str, vsum)) { - printf("ERROR: %s does not contain a valid SHA1 sum\n", - verify_str); - return 1; - } - if (memcmp(output, vsum, 20) != 0) { - printf("SHA1 for %08lx ... %08lx ==> ", addr, - addr + len - 1); - for (i = 0; i < 20; i++) - printf("%02x", output[i]); - printf(" != "); - for (i = 0; i < 20; i++) - printf("%02x", vsum[i]); - printf(" ** ERROR **\n"); - return 1; - } - } - - return 0; -} -#else -static int do_sha1sum(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unsigned long addr, len; - unsigned int i; - u8 output[20]; - - if (argc < 3) - return CMD_RET_USAGE; - - addr = simple_strtoul(argv[1], NULL, 16); - len = simple_strtoul(argv[2], NULL, 16); - - sha1_csum_wd((unsigned char *) addr, len, output, CHUNKSZ_SHA1); - printf("SHA1 for %08lx ... %08lx ==> ", addr, addr + len - 1); - for (i = 0; i < 20; i++) - printf("%02x", output[i]); - printf("\n"); - - if (argc > 3) - store_result(output, argv[3]); - - return 0; + return hash_command("sha1", verify, cmdtp, flag, ac, av); } -#endif #ifdef CONFIG_SHA1SUM_VERIFY U_BOOT_CMD( diff --git a/common/cmd_sound.c b/common/cmd_sound.c new file mode 100644 index 0000000..459d1eb --- /dev/null +++ b/common/cmd_sound.c @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <fdtdec.h> +#include <sound.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* Initilaise sound subsystem */ +static int do_init(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + int ret; + + ret = sound_init(); + if (ret) { + printf("Initialise Audio driver failed\n"); + return CMD_RET_FAILURE; + } + + return 0; +} + +/* play sound from buffer */ +static int do_play(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + int ret = 0; + int msec = 1000; + int freq = 400; + + if (argc > 1) + msec = simple_strtoul(argv[1], NULL, 10); + if (argc > 2) + freq = simple_strtoul(argv[2], NULL, 10); + + ret = sound_play(msec, freq); + if (ret) { + printf("play failed"); + return CMD_RET_FAILURE; + } + + return 0; +} + +static cmd_tbl_t cmd_sound_sub[] = { + U_BOOT_CMD_MKENT(init, 0, 1, do_init, "", ""), + U_BOOT_CMD_MKENT(play, 2, 1, do_play, "", ""), +}; + +/* process sound command */ +static int do_sound(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) +{ + cmd_tbl_t *c; + + if (argc < 1) + return CMD_RET_USAGE; + + /* Strip off leading 'sound' command argument */ + argc--; + argv++; + + c = find_cmd_tbl(argv[0], &cmd_sound_sub[0], ARRAY_SIZE(cmd_sound_sub)); + + if (c) + return c->cmd(cmdtp, flag, argc, argv); + else + return CMD_RET_USAGE; +} + +U_BOOT_CMD( + sound, 4, 1, do_sound, + "sound sub-system", + "init - initialise the sound driver\n" + "sound play [len] [freq] - play a sound for len ms at freq hz\n" +); diff --git a/common/cmd_spl.c b/common/cmd_spl.c index 9ec054a..e3c543b 100644 --- a/common/cmd_spl.c +++ b/common/cmd_spl.c @@ -130,10 +130,12 @@ static int spl_export(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (call_bootm(argc, argv, subcmd_list[(int)c->cmd])) return -1; switch ((int)c->cmd) { +#ifdef CONFIG_OF_LIBFDT case SPL_EXPORT_FDT: printf("Argument image is now in RAM: 0x%p\n", (void *)images.ft_addr); break; +#endif case SPL_EXPORT_ATAGS: printf("Argument image is now in RAM at: 0x%p\n", (void *)gd->bd->bi_boot_params); diff --git a/common/cmd_tpm.c b/common/cmd_tpm.c index 6f5cd48..0970a6f 100644 --- a/common/cmd_tpm.c +++ b/common/cmd_tpm.c @@ -63,19 +63,68 @@ static int tpm_process(int argc, char * const argv[], cmd_tbl_t *cmdtp) return rv; } -static int do_tpm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +#define CHECK(exp) do { \ + int _rv = exp; \ + if (_rv) { \ + printf("CHECK: %s %d %x\n", #exp, __LINE__, _rv);\ + } \ + } while (0) + +static int tpm_process_stress(int repeat_count) { + int i; int rv = 0; + u8 request[] = {0x0, 0xc1, + 0x0, 0x0, 0x0, 0x16, + 0x0, 0x0, 0x0, 0x65, + 0x0, 0x0, 0x0, 0x4, + 0x0, 0x0, 0x0, 0x4, + 0x0, 0x0, 0x1, 0x9}; + u8 response[MAX_TRANSACTION_SIZE]; + u32 rlength = MAX_TRANSACTION_SIZE; + + CHECK(tis_init()); + + for (i = 0; i < repeat_count; i++) { + CHECK(tis_open()); + rv = tis_sendrecv(request, sizeof(request), response, &rlength); + if (rv) { + printf("tpm test failed at step %d with 0x%x\n", i, rv); + CHECK(tis_close()); + break; + } + CHECK(tis_close()); + if ((response[6] || response[7] || response[8] || response[9]) + && response[9] != 0x26) { + /* Ignore postinit errors */ + printf("tpm command failed at step %d\n" + "tpm error code: %02x%02x%02x%02x\n", i, + response[6], response[7], + response[8], response[9]); + rv = -1; + break; + } + } + return rv; +} - /* - * Verify that in case it is present, the first argument, it is - * exactly one character in size. - */ - if (argc < 7) { + +static int do_tpm_many(cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[], int repeat_count) + +{ + int rv = 0; + + if (argc < 7 && repeat_count == 0) { puts("command should be at least six bytes in size\n"); return -1; } + if (repeat_count > 0) { + rv = tpm_process_stress(repeat_count); + return rv; + } + if (tis_init()) { puts("tis_init() failed!\n"); return -1; @@ -96,8 +145,40 @@ static int do_tpm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return rv; } + +static int do_tpm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + return do_tpm_many(cmdtp, flag, argc, argv, 0); +} + + U_BOOT_CMD(tpm, MAX_TRANSACTION_SIZE, 1, do_tpm, "<byte> [<byte> ...] - write data and read response", "send arbitrary data (at least 6 bytes) to the TPM " "device and read the response" ); + +static int do_tpm_stress(cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]) +{ + long unsigned int n; + int rv; + + if (argc != 2) { + puts("usage: tpm_stress <count>\n"); + return -1; + } + + rv = strict_strtoul(argv[1], 10, &n); + if (rv) { + puts("tpm_stress: bad count"); + return -1; + } + + return do_tpm_many(cmdtp, flag, argc, argv, n); +} + +U_BOOT_CMD(tpm_stress, 2, 1, do_tpm_stress, + "<n> - stress-test communication with TPM", + "Repeat a TPM transaction (request-response) N times" +); diff --git a/common/console.c b/common/console.c index 1177f7d..bf73178 100644 --- a/common/console.c +++ b/common/console.c @@ -24,11 +24,78 @@ #include <common.h> #include <stdarg.h> #include <malloc.h> +#include <serial.h> #include <stdio_dev.h> #include <exports.h> +#include <environment.h> DECLARE_GLOBAL_DATA_PTR; +static int on_console(const char *name, const char *value, enum env_op op, + int flags) +{ + int console = -1; + + /* Check for console redirection */ + if (strcmp(name, "stdin") == 0) + console = stdin; + else if (strcmp(name, "stdout") == 0) + console = stdout; + else if (strcmp(name, "stderr") == 0) + console = stderr; + + /* if not actually setting a console variable, we don't care */ + if (console == -1 || (gd->flags & GD_FLG_DEVINIT) == 0) + return 0; + + switch (op) { + case env_op_create: + case env_op_overwrite: + +#ifdef CONFIG_CONSOLE_MUX + if (iomux_doenv(console, value)) + return 1; +#else + /* Try assigning specified device */ + if (console_assign(console, value) < 0) + return 1; +#endif /* CONFIG_CONSOLE_MUX */ + return 0; + + case env_op_delete: + if ((flags & H_FORCE) == 0) + printf("Can't delete \"%s\"\n", name); + return 1; + + default: + return 0; + } +} +U_BOOT_ENV_CALLBACK(console, on_console); + +#ifdef CONFIG_SILENT_CONSOLE +static int on_silent(const char *name, const char *value, enum env_op op, + int flags) +{ +#ifndef CONFIG_SILENT_CONSOLE_UPDATE_ON_SET + if (flags & H_INTERACTIVE) + return 0; +#endif +#ifndef CONFIG_SILENT_CONSOLE_UPDATE_ON_RELOC + if ((flags & H_INTERACTIVE) == 0) + return 0; +#endif + + if (value != NULL) + gd->flags |= GD_FLG_SILENT; + else + gd->flags &= ~GD_FLG_SILENT; + + return 0; +} +U_BOOT_ENV_CALLBACK(silent, on_silent); +#endif + #ifdef CONFIG_SYS_CONSOLE_IS_IN_ENV /* * if overwrite_console returns 1, the stdin, stderr and stdout @@ -591,7 +658,6 @@ int console_init_f(void) void stdio_print_current_devices(void) { -#ifndef CONFIG_SYS_CONSOLE_INFO_QUIET /* Print information */ puts("In: "); if (stdio_devices[stdin] == NULL) { @@ -613,7 +679,6 @@ void stdio_print_current_devices(void) } else { printf ("%s\n", stdio_devices[stderr]->name); } -#endif /* CONFIG_SYS_CONSOLE_INFO_QUIET */ } #ifdef CONFIG_SYS_CONSOLE_IS_IN_ENV @@ -683,9 +748,9 @@ int console_init_r(void) done: #endif - gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */ - +#ifndef CONFIG_SYS_CONSOLE_INFO_QUIET stdio_print_current_devices(); +#endif /* CONFIG_SYS_CONSOLE_INFO_QUIET */ #ifdef CONFIG_SYS_CONSOLE_ENV_OVERWRITE /* set the environment variables (will overwrite previous env settings) */ @@ -694,6 +759,8 @@ done: } #endif /* CONFIG_SYS_CONSOLE_ENV_OVERWRITE */ + gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */ + #if 0 /* If nothing usable installed, use only the initial console */ if ((stdio_devices[stdin] == NULL) && (stdio_devices[stdout] == NULL)) @@ -758,15 +825,17 @@ int console_init_r(void) #endif } - gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */ - +#ifndef CONFIG_SYS_CONSOLE_INFO_QUIET stdio_print_current_devices(); +#endif /* CONFIG_SYS_CONSOLE_INFO_QUIET */ /* Setting environment variables */ for (i = 0; i < 3; i++) { setenv(stdio_names[i], stdio_devices[i]->name); } + gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */ + #if 0 /* If nothing usable installed, use only the initial console */ if ((stdio_devices[stdin] == NULL) && (stdio_devices[stdout] == NULL)) diff --git a/common/edid.c b/common/edid.c new file mode 100644 index 0000000..c82c298 --- /dev/null +++ b/common/edid.c @@ -0,0 +1,307 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * (C) Copyright 2010 + * Petr Stetiar <ynezz@true.cz> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Contains stolen code from ddcprobe project which is: + * Copyright (C) Nalin Dahyabhai <bigfun@pobox.com> + * + */ + +#include <common.h> +#include <edid.h> +#include <linux/ctype.h> +#include <linux/string.h> + +int edid_check_info(struct edid1_info *edid_info) +{ + if ((edid_info == NULL) || (edid_info->version == 0)) + return -1; + + if (memcmp(edid_info->header, "\x0\xff\xff\xff\xff\xff\xff\x0", 8)) + return -1; + + if (edid_info->version == 0xff && edid_info->revision == 0xff) + return -1; + + return 0; +} + +int edid_get_ranges(struct edid1_info *edid, unsigned int *hmin, + unsigned int *hmax, unsigned int *vmin, + unsigned int *vmax) +{ + int i; + struct edid_monitor_descriptor *monitor; + + *hmin = *hmax = *vmin = *vmax = 0; + if (edid_check_info(edid)) + return -1; + + for (i = 0; i < ARRAY_SIZE(edid->monitor_details.descriptor); i++) { + monitor = &edid->monitor_details.descriptor[i]; + if (monitor->type == EDID_MONITOR_DESCRIPTOR_RANGE) { + *hmin = monitor->data.range_data.horizontal_min; + *hmax = monitor->data.range_data.horizontal_max; + *vmin = monitor->data.range_data.vertical_min; + *vmax = monitor->data.range_data.vertical_max; + return 0; + } + } + return -1; +} + +/** + * Snip the tailing whitespace/return of a string. + * + * @param string The string to be snipped + * @return the snipped string + */ +static char *snip(char *string) +{ + char *s; + + /* + * This is always a 13 character buffer + * and it's not always terminated. + */ + string[12] = '\0'; + s = &string[strlen(string) - 1]; + + while (s >= string && (isspace(*s) || *s == '\n' || *s == '\r' || + *s == '\0')) + *(s--) = '\0'; + + return string; +} + +/** + * Print an EDID monitor descriptor block + * + * @param monitor The EDID monitor descriptor block + * @have_timing Modifies to 1 if the desciptor contains timing info + */ +static void edid_print_dtd(struct edid_monitor_descriptor *monitor, + unsigned int *have_timing) +{ + unsigned char *bytes = (unsigned char *)monitor; + struct edid_detailed_timing *timing = + (struct edid_detailed_timing *)monitor; + + if (bytes[0] == 0 && bytes[1] == 0) { + if (monitor->type == EDID_MONITOR_DESCRIPTOR_SERIAL) + printf("Monitor serial number: %s\n", + snip(monitor->data.string)); + else if (monitor->type == EDID_MONITOR_DESCRIPTOR_ASCII) + printf("Monitor ID: %s\n", + snip(monitor->data.string)); + else if (monitor->type == EDID_MONITOR_DESCRIPTOR_NAME) + printf("Monitor name: %s\n", + snip(monitor->data.string)); + else if (monitor->type == EDID_MONITOR_DESCRIPTOR_RANGE) + printf("Monitor range limits, horizontal sync: " + "%d-%d kHz, vertical refresh: " + "%d-%d Hz, max pixel clock: " + "%d MHz\n", + monitor->data.range_data.horizontal_min, + monitor->data.range_data.horizontal_max, + monitor->data.range_data.vertical_min, + monitor->data.range_data.vertical_max, + monitor->data.range_data.pixel_clock_max * 10); + } else { + uint32_t pixclock, h_active, h_blanking, v_active, v_blanking; + uint32_t h_total, v_total, vfreq; + + pixclock = EDID_DETAILED_TIMING_PIXEL_CLOCK(*timing); + h_active = EDID_DETAILED_TIMING_HORIZONTAL_ACTIVE(*timing); + h_blanking = EDID_DETAILED_TIMING_HORIZONTAL_BLANKING(*timing); + v_active = EDID_DETAILED_TIMING_VERTICAL_ACTIVE(*timing); + v_blanking = EDID_DETAILED_TIMING_VERTICAL_BLANKING(*timing); + + h_total = h_active + h_blanking; + v_total = v_active + v_blanking; + if (v_total * h_total) + vfreq = pixclock / (v_total * h_total); + else + vfreq = 1; /* Error case */ + printf("\t%dx%d\%c\t%d Hz (detailed)\n", h_active, + v_active, h_active > 1000 ? ' ' : '\t', vfreq); + *have_timing = 1; + } +} + +/** + * Get the manufacturer name from an EDID info. + * + * @param edid_info The EDID info to be printed + * @param name Returns the string of the manufacturer name + */ +static void edid_get_manufacturer_name(struct edid1_info *edid, char *name) +{ + name[0] = EDID1_INFO_MANUFACTURER_NAME_CHAR1(*edid) + 'A' - 1; + name[1] = EDID1_INFO_MANUFACTURER_NAME_CHAR2(*edid) + 'A' - 1; + name[2] = EDID1_INFO_MANUFACTURER_NAME_CHAR3(*edid) + 'A' - 1; + name[3] = '\0'; +} + +void edid_print_info(struct edid1_info *edid_info) +{ + int i; + char manufacturer[4]; + unsigned int have_timing = 0; + uint32_t serial_number; + + if (edid_check_info(edid_info)) { + printf("Not a valid EDID\n"); + return; + } + + printf("EDID version: %d.%d\n", + edid_info->version, edid_info->revision); + + printf("Product ID code: %04x\n", EDID1_INFO_PRODUCT_CODE(*edid_info)); + + edid_get_manufacturer_name(edid_info, manufacturer); + printf("Manufacturer: %s\n", manufacturer); + + serial_number = EDID1_INFO_SERIAL_NUMBER(*edid_info); + if (serial_number != 0xffffffff) { + if (strcmp(manufacturer, "MAG") == 0) + serial_number -= 0x7000000; + if (strcmp(manufacturer, "OQI") == 0) + serial_number -= 456150000; + if (strcmp(manufacturer, "VSC") == 0) + serial_number -= 640000000; + } + printf("Serial number: %08x\n", serial_number); + printf("Manufactured in week: %d year: %d\n", + edid_info->week, edid_info->year + 1990); + + printf("Video input definition: %svoltage level %d%s%s%s%s%s\n", + EDID1_INFO_VIDEO_INPUT_DIGITAL(*edid_info) ? + "digital signal, " : "analog signal, ", + EDID1_INFO_VIDEO_INPUT_VOLTAGE_LEVEL(*edid_info), + EDID1_INFO_VIDEO_INPUT_BLANK_TO_BLACK(*edid_info) ? + ", blank to black" : "", + EDID1_INFO_VIDEO_INPUT_SEPARATE_SYNC(*edid_info) ? + ", separate sync" : "", + EDID1_INFO_VIDEO_INPUT_COMPOSITE_SYNC(*edid_info) ? + ", composite sync" : "", + EDID1_INFO_VIDEO_INPUT_SYNC_ON_GREEN(*edid_info) ? + ", sync on green" : "", + EDID1_INFO_VIDEO_INPUT_SERRATION_V(*edid_info) ? + ", serration v" : ""); + + printf("Monitor is %s\n", + EDID1_INFO_FEATURE_RGB(*edid_info) ? "RGB" : "non-RGB"); + + printf("Maximum visible display size: %d cm x %d cm\n", + edid_info->max_size_horizontal, + edid_info->max_size_vertical); + + printf("Power management features: %s%s, %s%s, %s%s\n", + EDID1_INFO_FEATURE_ACTIVE_OFF(*edid_info) ? + "" : "no ", "active off", + EDID1_INFO_FEATURE_SUSPEND(*edid_info) ? "" : "no ", "suspend", + EDID1_INFO_FEATURE_STANDBY(*edid_info) ? "" : "no ", "standby"); + + printf("Estabilished timings:\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_720X400_70(*edid_info)) + printf("\t720x400\t\t70 Hz (VGA 640x400, IBM)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_720X400_88(*edid_info)) + printf("\t720x400\t\t88 Hz (XGA2)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_640X480_60(*edid_info)) + printf("\t640x480\t\t60 Hz (VGA)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_640X480_67(*edid_info)) + printf("\t640x480\t\t67 Hz (Mac II, Apple)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_640X480_72(*edid_info)) + printf("\t640x480\t\t72 Hz (VESA)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_640X480_75(*edid_info)) + printf("\t640x480\t\t75 Hz (VESA)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_800X600_56(*edid_info)) + printf("\t800x600\t\t56 Hz (VESA)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_800X600_60(*edid_info)) + printf("\t800x600\t\t60 Hz (VESA)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_800X600_72(*edid_info)) + printf("\t800x600\t\t72 Hz (VESA)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_800X600_75(*edid_info)) + printf("\t800x600\t\t75 Hz (VESA)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_832X624_75(*edid_info)) + printf("\t832x624\t\t75 Hz (Mac II)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_1024X768_87I(*edid_info)) + printf("\t1024x768\t87 Hz Interlaced (8514A)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_1024X768_60(*edid_info)) + printf("\t1024x768\t60 Hz (VESA)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_1024X768_70(*edid_info)) + printf("\t1024x768\t70 Hz (VESA)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_1024X768_75(*edid_info)) + printf("\t1024x768\t75 Hz (VESA)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_1280X1024_75(*edid_info)) + printf("\t1280x1024\t75 (VESA)\n"); + if (EDID1_INFO_ESTABLISHED_TIMING_1152X870_75(*edid_info)) + printf("\t1152x870\t75 (Mac II)\n"); + + /* Standard timings. */ + printf("Standard timings:\n"); + for (i = 0; i < ARRAY_SIZE(edid_info->standard_timings); i++) { + unsigned int aspect = 10000; + unsigned int x, y; + unsigned char xres, vfreq; + + xres = EDID1_INFO_STANDARD_TIMING_XRESOLUTION(*edid_info, i); + vfreq = EDID1_INFO_STANDARD_TIMING_VFREQ(*edid_info, i); + if ((xres != vfreq) || + ((xres != 0) && (xres != 1)) || + ((vfreq != 0) && (vfreq != 1))) { + switch (EDID1_INFO_STANDARD_TIMING_ASPECT(*edid_info, + i)) { + case ASPECT_625: + aspect = 6250; + break; + case ASPECT_75: + aspect = 7500; + break; + case ASPECT_8: + aspect = 8000; + break; + case ASPECT_5625: + aspect = 5625; + break; + } + x = (xres + 31) * 8; + y = x * aspect / 10000; + printf("\t%dx%d%c\t%d Hz\n", x, y, + x > 1000 ? ' ' : '\t', (vfreq & 0x3f) + 60); + have_timing = 1; + } + } + + /* Detailed timing information. */ + for (i = 0; i < ARRAY_SIZE(edid_info->monitor_details.descriptor); + i++) { + edid_print_dtd(&edid_info->monitor_details.descriptor[i], + &have_timing); + } + + if (!have_timing) + printf("\tNone\n"); +} diff --git a/common/env_attr.c b/common/env_attr.c new file mode 100644 index 0000000..210c98d --- /dev/null +++ b/common/env_attr.c @@ -0,0 +1,229 @@ +/* + * (C) Copyright 2012 + * Joe Hershberger, National Instruments, joe.hershberger@ni.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifdef USE_HOSTCC /* Eliminate "ANSI does not permit..." warnings */ +#include <stdint.h> +#include <stdio.h> +#include <linux/linux_string.h> +#else +#include <common.h> +#endif + +#include <env_attr.h> +#include <errno.h> +#include <linux/string.h> +#include <malloc.h> + +/* + * Iterate through the whole list calling the callback for each found element. + * "attr_list" takes the form: + * attributes = [^,:\s]* + * entry = name[:attributes] + * list = entry[,list] + */ +int env_attr_walk(const char *attr_list, + int (*callback)(const char *name, const char *attributes)) +{ + const char *entry, *entry_end; + char *name, *attributes; + + if (!attr_list) + /* list not found */ + return 1; + + entry = attr_list; + do { + char *entry_cpy = NULL; + + entry_end = strchr(entry, ENV_ATTR_LIST_DELIM); + /* check if this is the last entry in the list */ + if (entry_end == NULL) { + int entry_len = strlen(entry); + + if (entry_len) { + /* + * allocate memory to copy the entry into since + * we will need to inject '\0' chars and squash + * white-space before calling the callback + */ + entry_cpy = malloc(entry_len + 1); + if (entry_cpy) + /* copy the rest of the list */ + strcpy(entry_cpy, entry); + else + return -ENOMEM; + } + } else { + int entry_len = entry_end - entry; + + if (entry_len) { + /* + * allocate memory to copy the entry into since + * we will need to inject '\0' chars and squash + * white-space before calling the callback + */ + entry_cpy = malloc(entry_len + 1); + if (entry_cpy) { + /* copy just this entry and null term */ + strncpy(entry_cpy, entry, entry_len); + entry_cpy[entry_len] = '\0'; + } else + return -ENOMEM; + } + } + + /* check if there is anything to process (e.g. not ",,,") */ + if (entry_cpy != NULL) { + attributes = strchr(entry_cpy, ENV_ATTR_SEP); + /* check if there is a ':' */ + if (attributes != NULL) { + /* replace the ':' with '\0' to term name */ + *attributes++ = '\0'; + /* remove white-space from attributes */ + attributes = strim(attributes); + } + /* remove white-space from name */ + name = strim(entry_cpy); + + /* only call the callback if there is a name */ + if (strlen(name) != 0) { + int retval = 0; + + retval = callback(name, attributes); + if (retval) { + free(entry_cpy); + return retval; + } + } + } + + free(entry_cpy); + entry = entry_end + 1; + } while (entry_end != NULL); + + return 0; +} + +/* + * Search for the last matching string in another string with the option to + * start looking at a certain point (i.e. ignore anything beyond that point). + */ +static char *reverse_strstr(const char *searched, const char *search_for, + const char *searched_start) +{ + char *result = NULL; + + if (*search_for == '\0') + return (char *)searched; + + for (;;) { + char *match = strstr(searched, search_for); + + /* + * Stop looking if no new match is found or looking past the + * searched_start pointer + */ + if (match == NULL || (searched_start != NULL && + match + strlen(search_for) > searched_start)) + break; + + result = match; + searched = match + 1; + } + + return result; +} + +/* + * Retrieve the attributes string associated with a single name in the list + * There is no protection on attributes being too small for the value + */ +int env_attr_lookup(const char *attr_list, const char *name, char *attributes) +{ + const char *entry = NULL; + + if (!attributes) + /* bad parameter */ + return -1; + if (!attr_list) + /* list not found */ + return 1; + + entry = reverse_strstr(attr_list, name, NULL); + while (entry != NULL) { + const char *prevch = entry - 1; + const char *nextch = entry + strlen(name); + + /* Skip spaces */ + while (*prevch == ' ') + prevch--; + while (*nextch == ' ') + nextch++; + + /* check for an exact match */ + if ((entry == attr_list || + *prevch == ENV_ATTR_LIST_DELIM) && + (*nextch == ENV_ATTR_SEP || + *nextch == ENV_ATTR_LIST_DELIM || + *nextch == '\0')) + break; + + entry = reverse_strstr(attr_list, name, entry); + } + if (entry != NULL) { + int len; + + /* skip the name */ + entry += strlen(name); + /* skip spaces */ + while (*entry == ' ') + entry++; + if (*entry != ENV_ATTR_SEP) + len = 0; + else { + const char *delim; + static const char delims[] = { + ENV_ATTR_LIST_DELIM, ' ', '\0'}; + + /* skip the attr sep */ + entry += 1; + /* skip spaces */ + while (*entry == ' ') + entry++; + + delim = strpbrk(entry, delims); + if (delim == NULL) + len = strlen(entry); + else + len = delim - entry; + memcpy(attributes, entry, len); + } + attributes[len] = '\0'; + + /* success */ + return 0; + } + + /* not found in list */ + return 2; +} diff --git a/common/env_callback.c b/common/env_callback.c new file mode 100644 index 0000000..78ca367 --- /dev/null +++ b/common/env_callback.c @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2012 + * Joe Hershberger, National Instruments, joe.hershberger@ni.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <environment.h> + +#if defined(CONFIG_NEEDS_MANUAL_RELOC) +DECLARE_GLOBAL_DATA_PTR; +#endif + +/* + * Look up a callback function pointer by name + */ +struct env_clbk_tbl *find_env_callback(const char *name) +{ + struct env_clbk_tbl *clbkp; + int i; + int num_callbacks = ll_entry_count(struct env_clbk_tbl, env_clbk); + + if (name == NULL) + return NULL; + + /* look up the callback in the linker-list */ + for (i = 0, clbkp = ll_entry_start(struct env_clbk_tbl, env_clbk); + i < num_callbacks; + i++, clbkp++) { + if (strcmp(name, clbkp->name) == 0) + return clbkp; + } + + return NULL; +} + +/* + * Look for a possible callback for a newly added variable + * This is called specifically when the variable did not exist in the hash + * previously, so the blanket update did not find this variable. + */ +void env_callback_init(ENTRY *var_entry) +{ + const char *var_name = var_entry->key; + const char *callback_list = getenv(ENV_CALLBACK_VAR); + char callback_name[256] = ""; + struct env_clbk_tbl *clbkp; + int ret = 1; + + /* look in the ".callbacks" var for a reference to this variable */ + if (callback_list != NULL) + ret = env_attr_lookup(callback_list, var_name, callback_name); + + /* only if not found there, look in the static list */ + if (ret) + ret = env_attr_lookup(ENV_CALLBACK_LIST_STATIC, var_name, + callback_name); + + /* if an association was found, set the callback pointer */ + if (!ret && strlen(callback_name)) { + clbkp = find_env_callback(callback_name); + if (clbkp != NULL) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) + var_entry->callback = clbkp->callback + gd->reloc_off; +#else + var_entry->callback = clbkp->callback; +#endif + } +} + +/* + * Called on each existing env var prior to the blanket update since removing + * a callback association should remove its callback. + */ +static int clear_callback(ENTRY *entry) +{ + entry->callback = NULL; + + return 0; +} + +/* + * Call for each element in the list that associates variables to callbacks + */ +static int set_callback(const char *name, const char *value) +{ + ENTRY e, *ep; + struct env_clbk_tbl *clbkp; + + e.key = name; + e.data = NULL; + hsearch_r(e, FIND, &ep, &env_htab, 0); + + /* does the env variable actually exist? */ + if (ep != NULL) { + /* the assocaition delares no callback, so remove the pointer */ + if (value == NULL || strlen(value) == 0) + ep->callback = NULL; + else { + /* assign the requested callback */ + clbkp = find_env_callback(value); + if (clbkp != NULL) +#if defined(CONFIG_NEEDS_MANUAL_RELOC) + ep->callback = clbkp->callback + gd->reloc_off; +#else + ep->callback = clbkp->callback; +#endif + } + } + + return 0; +} + +static int on_callbacks(const char *name, const char *value, enum env_op op, + int flags) +{ + /* remove all callbacks */ + hwalk_r(&env_htab, clear_callback); + + /* configure any static callback bindings */ + env_attr_walk(ENV_CALLBACK_LIST_STATIC, set_callback); + /* configure any dynamic callback bindings */ + env_attr_walk(value, set_callback); + + return 0; +} +U_BOOT_ENV_CALLBACK(callbacks, on_callbacks); diff --git a/common/env_common.c b/common/env_common.c index 3d3cb70..906b41f 100644 --- a/common/env_common.c +++ b/common/env_common.c @@ -40,7 +40,7 @@ DECLARE_GLOBAL_DATA_PTR; #include <env_default.h> struct hsearch_data env_htab = { - .apply = env_check_apply, + .change_ok = env_flags_validate, }; static uchar __env_get_char_spec(int index) @@ -81,13 +81,42 @@ const uchar *env_get_addr(int index) return &default_environment[index]; } +/* + * Read an environment variable as a boolean + * Return -1 if variable does not exist (default to true) + */ +int getenv_yesno(const char *var) +{ + char *s = getenv(var); + + if (s == NULL) + return -1; + return (*s == '1' || *s == 'y' || *s == 'Y' || *s == 't' || *s == 'T') ? + 1 : 0; +} + +/* + * Look up the variable from the default environment + */ +char *getenv_default(const char *name) +{ + char *ret_val; + unsigned long really_valid = gd->env_valid; + unsigned long real_gd_flags = gd->flags; + + /* Pretend that the image is bad. */ + gd->flags &= ~GD_FLG_ENV_READY; + gd->env_valid = 0; + ret_val = getenv(name); + gd->env_valid = really_valid; + gd->flags = real_gd_flags; + return ret_val; +} + void set_default_env(const char *s) { - /* - * By default, do not apply changes as they will eventually - * be applied by someone else - */ - int do_apply = 0; + int flags = 0; + if (sizeof(default_environment) > ENV_SIZE) { puts("*** Error - default environment is too large\n\n"); return; @@ -99,14 +128,7 @@ void set_default_env(const char *s) "using default environment\n\n", s + 1); } else { - /* - * This set_to_default was explicitly asked for - * by the user, as opposed to being a recovery - * mechanism. Therefore we check every single - * variable and apply changes to the system - * right away (e.g. baudrate, console). - */ - do_apply = 1; + flags = H_INTERACTIVE; puts(s); } } else { @@ -114,8 +136,8 @@ void set_default_env(const char *s) } if (himport_r(&env_htab, (char *)default_environment, - sizeof(default_environment), '\0', 0, - 0, NULL, do_apply) == 0) + sizeof(default_environment), '\0', flags, + 0, NULL) == 0) error("Environment import failed: errno = %d\n", errno); gd->flags |= GD_FLG_ENV_READY; @@ -130,8 +152,8 @@ int set_default_vars(int nvars, char * const vars[]) * (and use \0 as a separator) */ return himport_r(&env_htab, (const char *)default_environment, - sizeof(default_environment), '\0', H_NOCLEAR, - nvars, vars, 1 /* do_apply */); + sizeof(default_environment), '\0', + H_NOCLEAR | H_INTERACTIVE, nvars, vars); } #ifndef CONFIG_SPL_BUILD @@ -155,7 +177,7 @@ int env_import(const char *buf, int check) } if (himport_r(&env_htab, (char *)ep->data, ENV_SIZE, '\0', 0, - 0, NULL, 0 /* do_apply */)) { + 0, NULL)) { gd->flags |= GD_FLG_ENV_READY; return 1; } @@ -172,6 +194,7 @@ void env_relocate(void) { #if defined(CONFIG_NEEDS_MANUAL_RELOC) env_reloc(); + env_htab.change_ok += gd->reloc_off; #endif if (gd->env_valid == 0) { #if defined(CONFIG_ENV_IS_NOWHERE) || defined(CONFIG_SPL_BUILD) diff --git a/common/env_dataflash.c b/common/env_dataflash.c index 3c5af37..38c9615 100644 --- a/common/env_dataflash.c +++ b/common/env_dataflash.c @@ -60,7 +60,7 @@ int saveenv(void) char *res; res = (char *)&env_new.data; - len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL); + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); return 1; diff --git a/common/env_eeprom.c b/common/env_eeprom.c index b66bba2..45c935b 100644 --- a/common/env_eeprom.c +++ b/common/env_eeprom.c @@ -139,7 +139,7 @@ int saveenv(void) BUG_ON(env_ptr != NULL); res = (char *)&env_new.data; - len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL); + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); return 1; diff --git a/common/env_fat.c b/common/env_fat.c index 6ef5318..c0f18ab 100644 --- a/common/env_fat.c +++ b/common/env_fat.c @@ -61,7 +61,7 @@ int saveenv(void) int err; res = (char *)&env_new.data; - len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL); + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); return 1; diff --git a/common/env_flags.c b/common/env_flags.c new file mode 100644 index 0000000..336cae4 --- /dev/null +++ b/common/env_flags.c @@ -0,0 +1,560 @@ +/* + * (C) Copyright 2012 + * Joe Hershberger, National Instruments, joe.hershberger@ni.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/string.h> +#include <linux/ctype.h> + +#ifdef USE_HOSTCC /* Eliminate "ANSI does not permit..." warnings */ +#include <stdint.h> +#include <stdio.h> +#include "fw_env.h" +#include <env_attr.h> +#include <env_flags.h> +#define getenv fw_getenv +#else +#include <common.h> +#include <environment.h> +#endif + +#ifdef CONFIG_CMD_NET +#define ENV_FLAGS_NET_VARTYPE_REPS "im" +#else +#define ENV_FLAGS_NET_VARTYPE_REPS "" +#endif + +static const char env_flags_vartype_rep[] = "sdxb" ENV_FLAGS_NET_VARTYPE_REPS; +static const char env_flags_varaccess_rep[] = "aroc"; +static const int env_flags_varaccess_mask[] = { + 0, + ENV_FLAGS_VARACCESS_PREVENT_DELETE | + ENV_FLAGS_VARACCESS_PREVENT_CREATE | + ENV_FLAGS_VARACCESS_PREVENT_OVERWR, + ENV_FLAGS_VARACCESS_PREVENT_DELETE | + ENV_FLAGS_VARACCESS_PREVENT_OVERWR, + ENV_FLAGS_VARACCESS_PREVENT_DELETE | + ENV_FLAGS_VARACCESS_PREVENT_NONDEF_OVERWR}; + +#ifdef CONFIG_CMD_ENV_FLAGS +static const char * const env_flags_vartype_names[] = { + "string", + "decimal", + "hexadecimal", + "boolean", +#ifdef CONFIG_CMD_NET + "IP address", + "MAC address", +#endif +}; +static const char * const env_flags_varaccess_names[] = { + "any", + "read-only", + "write-once", + "change-default", +}; + +/* + * Print the whole list of available type flags. + */ +void env_flags_print_vartypes(void) +{ + enum env_flags_vartype curtype = (enum env_flags_vartype)0; + + while (curtype != env_flags_vartype_end) { + printf("\t%c -\t%s\n", env_flags_vartype_rep[curtype], + env_flags_vartype_names[curtype]); + curtype++; + } +} + +/* + * Print the whole list of available access flags. + */ +void env_flags_print_varaccess(void) +{ + enum env_flags_varaccess curaccess = (enum env_flags_varaccess)0; + + while (curaccess != env_flags_varaccess_end) { + printf("\t%c -\t%s\n", env_flags_varaccess_rep[curaccess], + env_flags_varaccess_names[curaccess]); + curaccess++; + } +} + +/* + * Return the name of the type. + */ +const char *env_flags_get_vartype_name(enum env_flags_vartype type) +{ + return env_flags_vartype_names[type]; +} + +/* + * Return the name of the access. + */ +const char *env_flags_get_varaccess_name(enum env_flags_varaccess access) +{ + return env_flags_varaccess_names[access]; +} +#endif /* CONFIG_CMD_ENV_FLAGS */ + +/* + * Parse the flags string from a .flags attribute list into the vartype enum. + */ +enum env_flags_vartype env_flags_parse_vartype(const char *flags) +{ + char *type; + + if (strlen(flags) <= ENV_FLAGS_VARTYPE_LOC) + return env_flags_vartype_string; + + type = strchr(env_flags_vartype_rep, + flags[ENV_FLAGS_VARTYPE_LOC]); + + if (type != NULL) + return (enum env_flags_vartype) + (type - &env_flags_vartype_rep[0]); + + printf("## Warning: Unknown environment variable type '%c'\n", + flags[ENV_FLAGS_VARTYPE_LOC]); + return env_flags_vartype_string; +} + +/* + * Parse the flags string from a .flags attribute list into the varaccess enum. + */ +enum env_flags_varaccess env_flags_parse_varaccess(const char *flags) +{ + char *access; + + if (strlen(flags) <= ENV_FLAGS_VARACCESS_LOC) + return env_flags_varaccess_any; + + access = strchr(env_flags_varaccess_rep, + flags[ENV_FLAGS_VARACCESS_LOC]); + + if (access != NULL) + return (enum env_flags_varaccess) + (access - &env_flags_varaccess_rep[0]); + + printf("## Warning: Unknown environment variable access method '%c'\n", + flags[ENV_FLAGS_VARACCESS_LOC]); + return env_flags_varaccess_any; +} + +/* + * Parse the binary flags from a hash table entry into the varaccess enum. + */ +enum env_flags_varaccess env_flags_parse_varaccess_from_binflags(int binflags) +{ + int i; + + for (i = 0; i < sizeof(env_flags_varaccess_mask); i++) + if (env_flags_varaccess_mask[i] == + (binflags & ENV_FLAGS_VARACCESS_BIN_MASK)) + return (enum env_flags_varaccess)i; + + printf("Warning: Non-standard access flags. (0x%x)\n", + binflags & ENV_FLAGS_VARACCESS_BIN_MASK); + + return env_flags_varaccess_any; +} + +static inline int is_hex_prefix(const char *value) +{ + return value[0] == '0' && (value[1] == 'x' || value[1] == 'X'); +} + +static void skip_num(int hex, const char *value, const char **end, + int max_digits) +{ + int i; + + if (hex && is_hex_prefix(value)) + value += 2; + + for (i = max_digits; i != 0; i--) { + if (hex && !isxdigit(*value)) + break; + if (!hex && !isdigit(*value)) + break; + value++; + } + if (end != NULL) + *end = value; +} + +/* + * Based on the declared type enum, validate that the value string complies + * with that format + */ +static int _env_flags_validate_type(const char *value, + enum env_flags_vartype type) +{ + const char *end; +#ifdef CONFIG_CMD_NET + const char *cur; + int i; +#endif + + switch (type) { + case env_flags_vartype_string: + break; + case env_flags_vartype_decimal: + skip_num(0, value, &end, -1); + if (*end != '\0') + return -1; + break; + case env_flags_vartype_hex: + skip_num(1, value, &end, -1); + if (*end != '\0') + return -1; + if (value + 2 == end && is_hex_prefix(value)) + return -1; + break; + case env_flags_vartype_bool: + if (value[0] != '1' && value[0] != 'y' && value[0] != 't' && + value[0] != 'Y' && value[0] != 'T' && + value[0] != '0' && value[0] != 'n' && value[0] != 'f' && + value[0] != 'N' && value[0] != 'F') + return -1; + if (value[1] != '\0') + return -1; + break; +#ifdef CONFIG_CMD_NET + case env_flags_vartype_ipaddr: + cur = value; + for (i = 0; i < 4; i++) { + skip_num(0, cur, &end, 3); + if (cur == end) + return -1; + if (i != 3 && *end != '.') + return -1; + if (i == 3 && *end != '\0') + return -1; + cur = end + 1; + } + break; + case env_flags_vartype_macaddr: + cur = value; + for (i = 0; i < 6; i++) { + skip_num(1, cur, &end, 2); + if (cur == end) + return -1; + if (cur + 2 == end && is_hex_prefix(cur)) + return -1; + if (i != 5 && *end != ':') + return -1; + if (i == 5 && *end != '\0') + return -1; + cur = end + 1; + } + break; +#endif + case env_flags_vartype_end: + return -1; + } + + /* OK */ + return 0; +} + +/* + * Look for flags in a provided list and failing that the static list + */ +static inline int env_flags_lookup(const char *flags_list, const char *name, + char *flags) +{ + int ret = 1; + + if (!flags) + /* bad parameter */ + return -1; + + /* try the env first */ + if (flags_list) + ret = env_attr_lookup(flags_list, name, flags); + + if (ret != 0) + /* if not found in the env, look in the static list */ + ret = env_attr_lookup(ENV_FLAGS_LIST_STATIC, name, flags); + + return ret; +} + +#ifdef USE_HOSTCC /* Functions only used from tools/env */ +/* + * Look up any flags directly from the .flags variable and the static list + * and convert them to the vartype enum. + */ +enum env_flags_vartype env_flags_get_type(const char *name) +{ + const char *flags_list = getenv(ENV_FLAGS_VAR); + char flags[ENV_FLAGS_ATTR_MAX_LEN + 1]; + + if (env_flags_lookup(flags_list, name, flags)) + return env_flags_vartype_string; + + if (strlen(flags) <= ENV_FLAGS_VARTYPE_LOC) + return env_flags_vartype_string; + + return env_flags_parse_vartype(flags); +} + +/* + * Look up the access of a variable directly from the .flags var. + */ +enum env_flags_varaccess env_flags_get_varaccess(const char *name) +{ + const char *flags_list = getenv(ENV_FLAGS_VAR); + char flags[ENV_FLAGS_ATTR_MAX_LEN + 1]; + + if (env_flags_lookup(flags_list, name, flags)) + return env_flags_varaccess_any; + + if (strlen(flags) <= ENV_FLAGS_VARACCESS_LOC) + return env_flags_varaccess_any; + + return env_flags_parse_varaccess(flags); +} + +/* + * Validate that the proposed new value for "name" is valid according to the + * defined flags for that variable, if any. + */ +int env_flags_validate_type(const char *name, const char *value) +{ + enum env_flags_vartype type; + + if (value == NULL) + return 0; + type = env_flags_get_type(name); + if (_env_flags_validate_type(value, type) < 0) { + printf("## Error: flags type check failure for " + "\"%s\" <= \"%s\" (type: %c)\n", + name, value, env_flags_vartype_rep[type]); + return -1; + } + return 0; +} + +/* + * Validate that the proposed access to variable "name" is valid according to + * the defined flags for that variable, if any. + */ +int env_flags_validate_varaccess(const char *name, int check_mask) +{ + enum env_flags_varaccess access; + int access_mask; + + access = env_flags_get_varaccess(name); + access_mask = env_flags_varaccess_mask[access]; + + return (check_mask & access_mask) != 0; +} + +/* + * Validate the parameters to "env set" directly + */ +int env_flags_validate_env_set_params(int argc, char * const argv[]) +{ + if ((argc >= 3) && argv[2] != NULL) { + enum env_flags_vartype type = env_flags_get_type(argv[1]); + + /* + * we don't currently check types that need more than + * one argument + */ + if (type != env_flags_vartype_string && argc > 3) { + printf("## Error: too many parameters for setting " + "\"%s\"\n", argv[1]); + return -1; + } + return env_flags_validate_type(argv[1], argv[2]); + } + /* ok */ + return 0; +} + +#else /* !USE_HOSTCC - Functions only used from lib/hashtable.c */ + +/* + * Parse the flag charachters from the .flags attribute list into the binary + * form to be stored in the environment entry->flags field. + */ +static int env_parse_flags_to_bin(const char *flags) +{ + int binflags; + + binflags = env_flags_parse_vartype(flags) & ENV_FLAGS_VARTYPE_BIN_MASK; + binflags |= env_flags_varaccess_mask[env_flags_parse_varaccess(flags)]; + + return binflags; +} + +/* + * Look for possible flags for a newly added variable + * This is called specifically when the variable did not exist in the hash + * previously, so the blanket update did not find this variable. + */ +void env_flags_init(ENTRY *var_entry) +{ + const char *var_name = var_entry->key; + const char *flags_list = getenv(ENV_FLAGS_VAR); + char flags[ENV_FLAGS_ATTR_MAX_LEN + 1] = ""; + int ret = 1; + + /* look in the ".flags" and static for a reference to this variable */ + ret = env_flags_lookup(flags_list, var_name, flags); + + /* if any flags were found, set the binary form to the entry */ + if (!ret && strlen(flags)) + var_entry->flags = env_parse_flags_to_bin(flags); +} + +/* + * Called on each existing env var prior to the blanket update since removing + * a flag in the flag list should remove its flags. + */ +static int clear_flags(ENTRY *entry) +{ + entry->flags = 0; + + return 0; +} + +/* + * Call for each element in the list that defines flags for a variable + */ +static int set_flags(const char *name, const char *value) +{ + ENTRY e, *ep; + + e.key = name; + e.data = NULL; + hsearch_r(e, FIND, &ep, &env_htab, 0); + + /* does the env variable actually exist? */ + if (ep != NULL) { + /* the flag list is empty, so clear the flags */ + if (value == NULL || strlen(value) == 0) + ep->flags = 0; + else + /* assign the requested flags */ + ep->flags = env_parse_flags_to_bin(value); + } + + return 0; +} + +static int on_flags(const char *name, const char *value, enum env_op op, + int flags) +{ + /* remove all flags */ + hwalk_r(&env_htab, clear_flags); + + /* configure any static flags */ + env_attr_walk(ENV_FLAGS_LIST_STATIC, set_flags); + /* configure any dynamic flags */ + env_attr_walk(value, set_flags); + + return 0; +} +U_BOOT_ENV_CALLBACK(flags, on_flags); + +/* + * Perform consistency checking before creating, overwriting, or deleting an + * environment variable. Called as a callback function by hsearch_r() and + * hdelete_r(). Returns 0 in case of success, 1 in case of failure. + * When (flag & H_FORCE) is set, do not print out any error message and force + * overwriting of write-once variables. + */ + +int env_flags_validate(const ENTRY *item, const char *newval, enum env_op op, + int flag) +{ + const char *name; + const char *oldval = NULL; + + if (op != env_op_create) + oldval = item->data; + + name = item->key; + + /* Default value for NULL to protect string-manipulating functions */ + newval = newval ? : ""; + + /* validate the value to match the variable type */ + if (op != env_op_delete) { + enum env_flags_vartype type = (enum env_flags_vartype) + (ENV_FLAGS_VARTYPE_BIN_MASK & item->flags); + + if (_env_flags_validate_type(newval, type) < 0) { + printf("## Error: flags type check failure for " + "\"%s\" <= \"%s\" (type: %c)\n", + name, newval, env_flags_vartype_rep[type]); + return -1; + } + } + + /* check for access permission */ +#ifndef CONFIG_ENV_ACCESS_IGNORE_FORCE + if (flag & H_FORCE) + return 0; +#endif + switch (op) { + case env_op_delete: + if (item->flags & ENV_FLAGS_VARACCESS_PREVENT_DELETE) { + printf("## Error: Can't delete \"%s\"\n", name); + return 1; + } + break; + case env_op_overwrite: + if (item->flags & ENV_FLAGS_VARACCESS_PREVENT_OVERWR) { + printf("## Error: Can't overwrite \"%s\"\n", name); + return 1; + } else if (item->flags & + ENV_FLAGS_VARACCESS_PREVENT_NONDEF_OVERWR) { + const char *defval = getenv_default(name); + + if (defval == NULL) + defval = ""; + printf("oldval: %s defval: %s\n", oldval, defval); + if (strcmp(oldval, defval) != 0) { + printf("## Error: Can't overwrite \"%s\"\n", + name); + return 1; + } + } + break; + case env_op_create: + if (item->flags & ENV_FLAGS_VARACCESS_PREVENT_CREATE) { + printf("## Error: Can't create \"%s\"\n", name); + return 1; + } + break; + } + + return 0; +} + +#endif diff --git a/common/env_flash.c b/common/env_flash.c index aa970d4..e07d336 100644 --- a/common/env_flash.c +++ b/common/env_flash.c @@ -142,7 +142,7 @@ int saveenv(void) goto done; res = (char *)&env_new.data; - len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL); + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); goto done; @@ -275,7 +275,7 @@ int saveenv(void) goto done; res = (char *)&env_new.data; - len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL); + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); goto done; diff --git a/common/env_mmc.c b/common/env_mmc.c index a2ff90b..ce21671 100644 --- a/common/env_mmc.c +++ b/common/env_mmc.c @@ -130,7 +130,7 @@ int saveenv(void) } res = (char *)&env_new->data; - len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL); + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); ret = 1; diff --git a/common/env_nand.c b/common/env_nand.c index 79e8033..22e72a2 100644 --- a/common/env_nand.c +++ b/common/env_nand.c @@ -186,7 +186,7 @@ int saveenv(void) return 1; res = (char *)&env_new.data; - len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL); + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); return 1; @@ -239,7 +239,7 @@ int saveenv(void) return 1; res = (char *)&env_new->data; - len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL); + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); return 1; diff --git a/common/env_nvram.c b/common/env_nvram.c index 6483db3..eab0e7b 100644 --- a/common/env_nvram.c +++ b/common/env_nvram.c @@ -90,7 +90,7 @@ int saveenv(void) int rcode = 0; res = (char *)&env_new.data; - len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL); + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); return 1; diff --git a/common/env_onenand.c b/common/env_onenand.c index da35071..faa903d 100644 --- a/common/env_onenand.c +++ b/common/env_onenand.c @@ -95,7 +95,7 @@ int saveenv(void) }; res = (char *)&env_new.data; - len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL); + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); return 1; diff --git a/common/env_sf.c b/common/env_sf.c index bbd472f..d9e9085 100644 --- a/common/env_sf.c +++ b/common/env_sf.c @@ -79,7 +79,7 @@ int saveenv(void) } res = (char *)&env_new.data; - len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL); + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); return 1; @@ -277,7 +277,7 @@ int saveenv(void) } res = (char *)&env_new.data; - len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL); + len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL); if (len < 0) { error("Cannot export environment: errno = %d\n", errno); goto done; diff --git a/common/fdt_support.c b/common/fdt_support.c index 963ea90..6b9fa05 100644 --- a/common/fdt_support.c +++ b/common/fdt_support.c @@ -1315,7 +1315,7 @@ int fdt_set_status_by_alias(void *fdt, const char* alias, return fdt_set_node_status(fdt, offset, status, error_code); } -#if defined(CONFIG_VIDEO) +#if defined(CONFIG_VIDEO) || defined(CONFIG_LCD) int fdt_add_edid(void *blob, const char *compat, unsigned char *edid_buf) { int noff; diff --git a/common/hash.c b/common/hash.c new file mode 100644 index 0000000..e3a6e43 --- /dev/null +++ b/common/hash.c @@ -0,0 +1,221 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * (C) Copyright 2011 + * Joe Hershberger, National Instruments, joe.hershberger@ni.com + * + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <hash.h> +#include <sha1.h> +#include <sha256.h> + +/* + * These are the hash algorithms we support. Chips which support accelerated + * crypto could perhaps add named version of these algorithms here. + */ +static struct hash_algo hash_algo[] = { +#ifdef CONFIG_SHA1 + { + "SHA1", + SHA1_SUM_LEN, + sha1_csum_wd, + CHUNKSZ_SHA1, + }, +#endif +#ifdef CONFIG_SHA256 + { + "SHA256", + SHA256_SUM_LEN, + sha256_csum_wd, + CHUNKSZ_SHA256, + }, +#endif +}; + +/** + * store_result: Store the resulting sum to an address or variable + * + * @algo: Hash algorithm being used + * @sum: Hash digest (algo->digest_size bytes) + * @dest: Destination, interpreted as a hex address if it starts + * with * or otherwise as an environment variable. + */ +static void store_result(struct hash_algo *algo, const u8 *sum, + const char *dest) +{ + unsigned int i; + + if (*dest == '*') { + u8 *ptr; + + ptr = (u8 *)simple_strtoul(dest + 1, NULL, 16); + memcpy(ptr, sum, algo->digest_size); + } else { + char str_output[HASH_MAX_DIGEST_SIZE * 2 + 1]; + char *str_ptr = str_output; + + for (i = 0; i < algo->digest_size; i++) { + sprintf(str_ptr, "%02x", sum[i]); + str_ptr += 2; + } + str_ptr = '\0'; + setenv(dest, str_output); + } +} + +/** + * parse_verify_sum: Parse a hash verification parameter + * + * @algo: Hash algorithm being used + * @verify_str: Argument to parse. If it starts with * then it is + * interpreted as a hex address containing the hash. + * If the length is exactly the right number of hex digits + * for the digest size, then we assume it is a hex digest. + * Otherwise we assume it is an environment variable, and + * look up its value (it must contain a hex digest). + * @vsum: Returns binary digest value (algo->digest_size bytes) + * @return 0 if ok, non-zero on error + */ +static int parse_verify_sum(struct hash_algo *algo, char *verify_str, u8 *vsum) +{ + if (*verify_str == '*') { + u8 *ptr; + + ptr = (u8 *)simple_strtoul(verify_str + 1, NULL, 16); + memcpy(vsum, ptr, algo->digest_size); + } else { + unsigned int i; + char *vsum_str; + int digits = algo->digest_size * 2; + + /* + * As with the original code from sha1sum.c, we assume that a + * string which matches the digest size exactly is a hex + * string and not an environment variable. + */ + if (strlen(verify_str) == digits) + vsum_str = verify_str; + else { + vsum_str = getenv(verify_str); + if (vsum_str == NULL || strlen(vsum_str) != digits) { + printf("Expected %d hex digits in env var\n", + digits); + return 1; + } + } + + for (i = 0; i < algo->digest_size; i++) { + char *nullp = vsum_str + (i + 1) * 2; + char end = *nullp; + + *nullp = '\0'; + vsum[i] = simple_strtoul(vsum_str + (i * 2), NULL, 16); + *nullp = end; + } + } + return 0; +} + +static struct hash_algo *find_hash_algo(const char *name) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(hash_algo); i++) { + if (!strcasecmp(name, hash_algo[i].name)) + return &hash_algo[i]; + } + + return NULL; +} + +static void show_hash(struct hash_algo *algo, ulong addr, ulong len, + u8 *output) +{ + int i; + + printf("%s for %08lx ... %08lx ==> ", algo->name, addr, addr + len - 1); + for (i = 0; i < algo->digest_size; i++) + printf("%02x", output[i]); +} + +int hash_command(const char *algo_name, int verify, cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]) +{ + struct hash_algo *algo; + ulong addr, len; + u8 output[HASH_MAX_DIGEST_SIZE]; + u8 vsum[HASH_MAX_DIGEST_SIZE]; + + if (argc < 2) + return CMD_RET_USAGE; + + algo = find_hash_algo(algo_name); + if (!algo) { + printf("Unknown hash algorithm '%s'\n", algo_name); + return CMD_RET_USAGE; + } + addr = simple_strtoul(*argv++, NULL, 16); + len = simple_strtoul(*argv++, NULL, 16); + argc -= 2; + + if (algo->digest_size > HASH_MAX_DIGEST_SIZE) { + puts("HASH_MAX_DIGEST_SIZE exceeded\n"); + return 1; + } + + algo->hash_func_ws((const unsigned char *)addr, len, output, + algo->chunk_size); + + /* Try to avoid code bloat when verify is not needed */ +#ifdef CONFIG_HASH_VERIFY + if (verify) { +#else + if (0) { +#endif + if (!argc) + return CMD_RET_USAGE; + if (parse_verify_sum(algo, *argv, vsum)) { + printf("ERROR: %s does not contain a valid %s sum\n", + *argv, algo->name); + return 1; + } + if (memcmp(output, vsum, algo->digest_size) != 0) { + int i; + + show_hash(algo, addr, len, output); + printf(" != "); + for (i = 0; i < algo->digest_size; i++) + printf("%02x", vsum[i]); + puts(" ** ERROR **\n"); + return 1; + } + } else { + show_hash(algo, addr, len, output); + printf("\n"); + + if (argc) + store_result(algo, output, *argv); + } + + return 0; +} diff --git a/common/image.c b/common/image.c index e93b6e8..95498e6 100644 --- a/common/image.c +++ b/common/image.c @@ -43,6 +43,7 @@ #include <rtc.h> #endif +#include <environment.h> #include <image.h> #if defined(CONFIG_FIT) || defined(CONFIG_OF_LIBFDT) @@ -416,11 +417,25 @@ static const image_header_t *image_get_ramdisk(ulong rd_addr, uint8_t arch, /* Shared dual-format routines */ /*****************************************************************************/ #ifndef USE_HOSTCC -int getenv_yesno(char *var) +ulong load_addr = CONFIG_SYS_LOAD_ADDR; /* Default Load Address */ +ulong save_addr; /* Default Save Address */ +ulong save_size; /* Default Save Size (in bytes) */ + +static int on_loadaddr(const char *name, const char *value, enum env_op op, + int flags) { - char *s = getenv(var); - return (s && (*s == 'n')) ? 0 : 1; + switch (op) { + case env_op_create: + case env_op_overwrite: + load_addr = simple_strtoul(value, NULL, 16); + break; + default: + break; + } + + return 0; } +U_BOOT_ENV_CALLBACK(loadaddr, on_loadaddr); ulong getenv_bootm_low(void) { diff --git a/common/lcd.c b/common/lcd.c index 4c83a8b..4778655 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -72,6 +72,15 @@ # endif #endif +#ifndef CONFIG_LCD_ALIGNMENT +#define CONFIG_LCD_ALIGNMENT PAGE_SIZE +#endif + +/* By default we scroll by a single line */ +#ifndef CONFIG_CONSOLE_SCROLL_LINES +#define CONFIG_CONSOLE_SCROLL_LINES 1 +#endif + DECLARE_GLOBAL_DATA_PTR; ulong lcd_setmem (ulong addr); @@ -90,6 +99,9 @@ static void lcd_setbgcolor(int color); char lcd_is_enabled = 0; +static char lcd_flush_dcache; /* 1 to flush dcache after each lcd update */ + + #ifdef NOT_USED_SO_FAR static void lcd_getcolreg(ushort regno, ushort *red, ushort *green, ushort *blue); @@ -98,15 +110,46 @@ static int lcd_getfgcolor(void); /************************************************************************/ +/* Flush LCD activity to the caches */ +void lcd_sync(void) +{ + /* + * flush_dcache_range() is declared in common.h but it seems that some + * architectures do not actually implement it. Is there a way to find + * out whether it exists? For now, ARM is safe. + */ +#if defined(CONFIG_ARM) && !defined(CONFIG_SYS_DCACHE_OFF) + int line_length; + + if (lcd_flush_dcache) + flush_dcache_range((u32)lcd_base, + (u32)(lcd_base + lcd_get_size(&line_length))); +#endif +} + +void lcd_set_flush_dcache(int flush) +{ + lcd_flush_dcache = (flush != 0); +} + /*----------------------------------------------------------------------*/ static void console_scrollup(void) { - /* Copy up rows ignoring the first one */ - memcpy(CONSOLE_ROW_FIRST, CONSOLE_ROW_SECOND, CONSOLE_SCROLL_SIZE); + const int rows = CONFIG_CONSOLE_SCROLL_LINES; - /* Clear the last one */ - memset(CONSOLE_ROW_LAST, COLOR_MASK(lcd_color_bg), CONSOLE_ROW_SIZE); + /* Copy up rows ignoring those that will be overwritten */ + memcpy(CONSOLE_ROW_FIRST, + lcd_console_address + CONSOLE_ROW_SIZE * rows, + CONSOLE_SIZE - CONSOLE_ROW_SIZE * rows); + + /* Clear the last rows */ + memset(lcd_console_address + CONSOLE_SIZE - CONSOLE_ROW_SIZE * rows, + COLOR_MASK(lcd_color_bg), + CONSOLE_ROW_SIZE * rows); + + lcd_sync(); + console_row -= rows; } /*----------------------------------------------------------------------*/ @@ -135,7 +178,8 @@ static inline void console_newline(void) if (console_row >= CONSOLE_ROWS) { /* Scroll everything up */ console_scrollup(); - --console_row; + } else { + lcd_sync(); } } @@ -191,6 +235,7 @@ void lcd_puts(const char *s) while (*s) { lcd_putc(*s++); } + lcd_sync(); } /*----------------------------------------------------------------------*/ @@ -326,6 +371,12 @@ static void test_pattern(void) /* ** GENERIC Initialization Routines */ /************************************************************************/ +int lcd_get_size(int *line_length) +{ + *line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; + return *line_length * panel_info.vl_row; +} + int drv_lcd_init (void) { struct stdio_dev lcddev; @@ -333,7 +384,7 @@ int drv_lcd_init (void) lcd_base = (void *)(gd->fb_base); - lcd_line_length = (panel_info.vl_col * NBITS (panel_info.vl_bpix)) / 8; + lcd_get_size(&lcd_line_length); lcd_init(lcd_base); /* LCD initialization */ @@ -352,13 +403,6 @@ int drv_lcd_init (void) } /*----------------------------------------------------------------------*/ -static -int do_lcd_clear(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) -{ - lcd_clear(); - return 0; -} - void lcd_clear(void) { #if LCD_BPP == LCD_MONOCHROME @@ -400,6 +444,14 @@ void lcd_clear(void) console_col = 0; console_row = 0; + lcd_sync(); +} + +static int do_lcd_clear(cmd_tbl_t *cmdtp, int flag, int argc, + char *const argv[]) +{ + lcd_clear(); + return 0; } U_BOOT_CMD( @@ -445,15 +497,16 @@ static int lcd_init(void *lcdbase) ulong lcd_setmem(ulong addr) { ulong size; - int line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8; + int line_length; debug("LCD panel info: %d x %d, %d bit/pix\n", panel_info.vl_col, panel_info.vl_row, NBITS(panel_info.vl_bpix)); - size = line_length * panel_info.vl_row; + size = lcd_get_size(&line_length); - /* Round up to nearest full page */ - size = (size + (PAGE_SIZE - 1)) & ~(PAGE_SIZE - 1); + /* Round up to nearest full page, or MMU section if defined */ + size = ALIGN(size, CONFIG_LCD_ALIGNMENT); + addr = ALIGN(addr - CONFIG_LCD_ALIGNMENT + 1, CONFIG_LCD_ALIGNMENT); /* Allocate pages for the frame buffer. */ addr -= size; @@ -610,6 +663,7 @@ void bitmap_plot(int x, int y) } WATCHDOG_RESET(); + lcd_sync(); } #else static inline void bitmap_plot(int x, int y) {} @@ -975,6 +1029,7 @@ int lcd_display_bitmap(ulong bmp_image, int x, int y) break; }; + lcd_sync(); return 0; } #endif diff --git a/common/main.c b/common/main.c index 5362781..5d8454e 100644 --- a/common/main.c +++ b/common/main.c @@ -376,6 +376,8 @@ void main_loop (void) char bcs_set[16]; #endif /* CONFIG_BOOTCOUNT_LIMIT */ + bootstage_mark_name(BOOTSTAGE_ID_MAIN_LOOP, "main_loop"); + #ifdef CONFIG_BOOTCOUNT_LIMIT bootcount = bootcount_load(); bootcount++; @@ -1139,8 +1141,16 @@ int readline_into_buffer(const char *const prompt, char *buffer, int timeout) puts (tab_seq+(col&07)); col += 8 - (col&07); } else { - ++col; /* echo input */ - putc (c); + char buf[2]; + + /* + * Echo input using puts() to force am + * LCD flush if we are using an LCD + */ + ++col; + buf[0] = c; + buf[1] = '\0'; + puts(buf); } *p++ = c; ++n; diff --git a/common/stdio.c b/common/stdio.c index 9f48e5f..97ff9cf 100644 --- a/common/stdio.c +++ b/common/stdio.c @@ -135,7 +135,6 @@ struct stdio_dev* stdio_clone(struct stdio_dev *dev) return NULL; memcpy(_dev, dev, sizeof(struct stdio_dev)); - strncpy(_dev->name, dev->name, 16); return _dev; } diff --git a/disk/part_efi.c b/disk/part_efi.c index a3873ce..7665017 100644 --- a/disk/part_efi.c +++ b/disk/part_efi.c @@ -34,9 +34,11 @@ #include <command.h> #include <ide.h> #include <malloc.h> -#include "part_efi.h" +#include <part_efi.h> #include <linux/ctype.h> +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_CMD_IDE) || \ defined(CONFIG_CMD_SATA) || \ defined(CONFIG_CMD_SCSI) || \ @@ -44,34 +46,6 @@ defined(CONFIG_MMC) || \ defined(CONFIG_SYSTEMACE) -/* Convert char[2] in little endian format to the host format integer - */ -static inline unsigned short le16_to_int(unsigned char *le16) -{ - return ((le16[1] << 8) + le16[0]); -} - -/* Convert char[4] in little endian format to the host format integer - */ -static inline unsigned long le32_to_int(unsigned char *le32) -{ - return ((le32[3] << 24) + (le32[2] << 16) + (le32[1] << 8) + le32[0]); -} - -/* Convert char[8] in little endian format to the host format integer - */ -static inline unsigned long long le64_to_int(unsigned char *le64) -{ - return (((unsigned long long)le64[7] << 56) + - ((unsigned long long)le64[6] << 48) + - ((unsigned long long)le64[5] << 40) + - ((unsigned long long)le64[4] << 32) + - ((unsigned long long)le64[3] << 24) + - ((unsigned long long)le64[2] << 16) + - ((unsigned long long)le64[1] << 8) + - (unsigned long long)le64[0]); -} - /** * efi_crc32() - EFI version of crc32 function * @buf: buffer to calculate crc32 of @@ -79,7 +53,7 @@ static inline unsigned long long le64_to_int(unsigned char *le64) * * Description: Returns EFI-style CRC32 value for @buf */ -static inline unsigned long efi_crc32(const void *buf, unsigned long len) +static inline u32 efi_crc32(const void *buf, u32 len) { return crc32(0, buf, len); } @@ -90,13 +64,10 @@ static inline unsigned long efi_crc32(const void *buf, unsigned long len) static int pmbr_part_valid(struct partition *part); static int is_pmbr_valid(legacy_mbr * mbr); - static int is_gpt_valid(block_dev_desc_t * dev_desc, unsigned long long lba, gpt_header * pgpt_head, gpt_entry ** pgpt_pte); - static gpt_entry *alloc_read_gpt_entries(block_dev_desc_t * dev_desc, gpt_header * pgpt_head); - static int is_pte_valid(gpt_entry * pte); static char *print_efiname(gpt_entry *pte) @@ -142,6 +113,7 @@ static inline int is_bootable(gpt_entry *p) sizeof(efi_guid_t)); } +#ifdef CONFIG_EFI_PARTITION /* * Public Functions (include/part.h) */ @@ -171,14 +143,14 @@ void print_part_efi(block_dev_desc_t * dev_desc) printf("\tType UUID\n"); printf("\tPartition UUID\n"); - for (i = 0; i < le32_to_int(gpt_head->num_partition_entries); i++) { + for (i = 0; i < le32_to_cpu(gpt_head->num_partition_entries); i++) { /* Stop at the first non valid PTE */ if (!is_pte_valid(&gpt_pte[i])) break; printf("%3d\t0x%08llx\t0x%08llx\t\"%s\"\n", (i + 1), - le64_to_int(gpt_pte[i].starting_lba), - le64_to_int(gpt_pte[i].ending_lba), + le64_to_cpu(gpt_pte[i].starting_lba), + le64_to_cpu(gpt_pte[i].ending_lba), print_efiname(&gpt_pte[i])); printf("\tattrs:\t0x%016llx\n", gpt_pte[i].attributes.raw); uuid_string(gpt_pte[i].partition_type_guid.b, uuid); @@ -211,7 +183,7 @@ int get_partition_info_efi(block_dev_desc_t * dev_desc, int part, return -1; } - if (part > le32_to_int(gpt_head->num_partition_entries) || + if (part > le32_to_cpu(gpt_head->num_partition_entries) || !is_pte_valid(&gpt_pte[part - 1])) { printf("%s: *** ERROR: Invalid partition number %d ***\n", __func__, part); @@ -219,9 +191,9 @@ int get_partition_info_efi(block_dev_desc_t * dev_desc, int part, } /* The ulong casting limits the maximum disk size to 2 TB */ - info->start = (ulong) le64_to_int(gpt_pte[part - 1].starting_lba); + info->start = (u64)le64_to_cpu(gpt_pte[part - 1].starting_lba); /* The ending LBA is inclusive, to calculate size, add 1 to it */ - info->size = ((ulong)le64_to_int(gpt_pte[part - 1].ending_lba) + 1) + info->size = ((u64)le64_to_cpu(gpt_pte[part - 1].ending_lba) + 1) - info->start; info->blksz = GPT_BLOCK_SIZE; @@ -253,6 +225,281 @@ int test_part_efi(block_dev_desc_t * dev_desc) return 0; } +/** + * set_protective_mbr(): Set the EFI protective MBR + * @param dev_desc - block device descriptor + * + * @return - zero on success, otherwise error + */ +static int set_protective_mbr(block_dev_desc_t *dev_desc) +{ + legacy_mbr *p_mbr; + + /* Setup the Protective MBR */ + p_mbr = calloc(1, sizeof(p_mbr)); + if (p_mbr == NULL) { + printf("%s: calloc failed!\n", __func__); + return -1; + } + /* Append signature */ + p_mbr->signature = MSDOS_MBR_SIGNATURE; + p_mbr->partition_record[0].sys_ind = EFI_PMBR_OSTYPE_EFI_GPT; + p_mbr->partition_record[0].start_sect = 1; + p_mbr->partition_record[0].nr_sects = (u32) dev_desc->lba; + + /* Write MBR sector to the MMC device */ + if (dev_desc->block_write(dev_desc->dev, 0, 1, p_mbr) != 1) { + printf("** Can't write to device %d **\n", + dev_desc->dev); + free(p_mbr); + return -1; + } + + free(p_mbr); + return 0; +} + +/** + * string_uuid(); Convert UUID stored as string to bytes + * + * @param uuid - UUID represented as string + * @param dst - GUID buffer + * + * @return return 0 on successful conversion + */ +static int string_uuid(char *uuid, u8 *dst) +{ + efi_guid_t guid; + u16 b, c, d; + u64 e; + u32 a; + u8 *p; + u8 i; + + const u8 uuid_str_len = 36; + + /* The UUID is written in text: */ + /* 1 9 14 19 24 */ + /* xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx */ + + debug("%s: uuid: %s\n", __func__, uuid); + + if (strlen(uuid) != uuid_str_len) + return -1; + + for (i = 0; i < uuid_str_len; i++) { + if ((i == 8) || (i == 13) || (i == 18) || (i == 23)) { + if (uuid[i] != '-') + return -1; + } else { + if (!isxdigit(uuid[i])) + return -1; + } + } + + a = (u32)simple_strtoul(uuid, NULL, 16); + b = (u16)simple_strtoul(uuid + 9, NULL, 16); + c = (u16)simple_strtoul(uuid + 14, NULL, 16); + d = (u16)simple_strtoul(uuid + 19, NULL, 16); + e = (u64)simple_strtoull(uuid + 24, NULL, 16); + + p = (u8 *) &e; + guid = EFI_GUID(a, b, c, d >> 8, d & 0xFF, + *(p + 5), *(p + 4), *(p + 3), + *(p + 2), *(p + 1) , *p); + + memcpy(dst, guid.b, sizeof(efi_guid_t)); + + return 0; +} + +int write_gpt_table(block_dev_desc_t *dev_desc, + gpt_header *gpt_h, gpt_entry *gpt_e) +{ + const int pte_blk_num = (gpt_h->num_partition_entries + * sizeof(gpt_entry)) / dev_desc->blksz; + + u32 calc_crc32; + u64 val; + + debug("max lba: %x\n", (u32) dev_desc->lba); + /* Setup the Protective MBR */ + if (set_protective_mbr(dev_desc) < 0) + goto err; + + /* Generate CRC for the Primary GPT Header */ + calc_crc32 = efi_crc32((const unsigned char *)gpt_e, + le32_to_cpu(gpt_h->num_partition_entries) * + le32_to_cpu(gpt_h->sizeof_partition_entry)); + gpt_h->partition_entry_array_crc32 = cpu_to_le32(calc_crc32); + + calc_crc32 = efi_crc32((const unsigned char *)gpt_h, + le32_to_cpu(gpt_h->header_size)); + gpt_h->header_crc32 = cpu_to_le32(calc_crc32); + + /* Write the First GPT to the block right after the Legacy MBR */ + if (dev_desc->block_write(dev_desc->dev, 1, 1, gpt_h) != 1) + goto err; + + if (dev_desc->block_write(dev_desc->dev, 2, pte_blk_num, gpt_e) + != pte_blk_num) + goto err; + + /* recalculate the values for the Second GPT Header */ + val = le64_to_cpu(gpt_h->my_lba); + gpt_h->my_lba = gpt_h->alternate_lba; + gpt_h->alternate_lba = cpu_to_le64(val); + gpt_h->header_crc32 = 0; + + calc_crc32 = efi_crc32((const unsigned char *)gpt_h, + le32_to_cpu(gpt_h->header_size)); + gpt_h->header_crc32 = cpu_to_le32(calc_crc32); + + if (dev_desc->block_write(dev_desc->dev, + le32_to_cpu(gpt_h->last_usable_lba + 1), + pte_blk_num, gpt_e) != pte_blk_num) + goto err; + + if (dev_desc->block_write(dev_desc->dev, + le32_to_cpu(gpt_h->my_lba), 1, gpt_h) != 1) + goto err; + + debug("GPT successfully written to block device!\n"); + return 0; + + err: + printf("** Can't write to device %d **\n", dev_desc->dev); + return -1; +} + +int gpt_fill_pte(gpt_header *gpt_h, gpt_entry *gpt_e, + disk_partition_t *partitions, int parts) +{ + u32 offset = (u32)le32_to_cpu(gpt_h->first_usable_lba); + ulong start; + int i, k; + size_t name_len; +#ifdef CONFIG_PARTITION_UUIDS + char *str_uuid; +#endif + + for (i = 0; i < parts; i++) { + /* partition starting lba */ + start = partitions[i].start; + if (start && (start < offset)) { + printf("Partition overlap\n"); + return -1; + } + if (start) { + gpt_e[i].starting_lba = cpu_to_le64(start); + offset = start + partitions[i].size; + } else { + gpt_e[i].starting_lba = cpu_to_le64(offset); + offset += partitions[i].size; + } + if (offset >= gpt_h->last_usable_lba) { + printf("Partitions layout exceds disk size\n"); + return -1; + } + /* partition ending lba */ + if ((i == parts - 1) && (partitions[i].size == 0)) + /* extend the last partition to maximuim */ + gpt_e[i].ending_lba = gpt_h->last_usable_lba; + else + gpt_e[i].ending_lba = cpu_to_le64(offset - 1); + + /* partition type GUID */ + memcpy(gpt_e[i].partition_type_guid.b, + &PARTITION_BASIC_DATA_GUID, 16); + +#ifdef CONFIG_PARTITION_UUIDS + str_uuid = partitions[i].uuid; + if (string_uuid(str_uuid, gpt_e[i].unique_partition_guid.b)) { + printf("Partition no. %d: invalid guid: %s\n", + i, str_uuid); + return -1; + } +#endif + + /* partition attributes */ + memset(&gpt_e[i].attributes, 0, + sizeof(gpt_entry_attributes)); + + /* partition name */ + name_len = sizeof(gpt_e[i].partition_name) + / sizeof(efi_char16_t); + for (k = 0; k < name_len; k++) + gpt_e[i].partition_name[k] = + (efi_char16_t)(partitions[i].name[k]); + + debug("%s: name: %s offset[%d]: 0x%x size[%d]: 0x%lx\n", + __func__, partitions[i].name, i, + offset, i, partitions[i].size); + } + + return 0; +} + +int gpt_fill_header(block_dev_desc_t *dev_desc, gpt_header *gpt_h, + char *str_guid, int parts_count) +{ + gpt_h->signature = cpu_to_le64(GPT_HEADER_SIGNATURE); + gpt_h->revision = cpu_to_le32(GPT_HEADER_REVISION_V1); + gpt_h->header_size = cpu_to_le32(sizeof(gpt_header)); + gpt_h->my_lba = cpu_to_le64(1); + gpt_h->alternate_lba = cpu_to_le64(dev_desc->lba - 1); + gpt_h->first_usable_lba = cpu_to_le64(34); + gpt_h->last_usable_lba = cpu_to_le64(dev_desc->lba - 34); + gpt_h->partition_entry_lba = cpu_to_le64(2); + gpt_h->num_partition_entries = cpu_to_le32(GPT_ENTRY_NUMBERS); + gpt_h->sizeof_partition_entry = cpu_to_le32(sizeof(gpt_entry)); + gpt_h->header_crc32 = 0; + gpt_h->partition_entry_array_crc32 = 0; + + if (string_uuid(str_guid, gpt_h->disk_guid.b)) + return -1; + + return 0; +} + +int gpt_restore(block_dev_desc_t *dev_desc, char *str_disk_guid, + disk_partition_t *partitions, int parts_count) +{ + int ret; + + gpt_header *gpt_h = calloc(1, sizeof(gpt_header)); + if (gpt_h == NULL) { + printf("%s: calloc failed!\n", __func__); + return -1; + } + + gpt_entry *gpt_e = calloc(GPT_ENTRY_NUMBERS, sizeof(gpt_entry)); + if (gpt_e == NULL) { + printf("%s: calloc failed!\n", __func__); + free(gpt_h); + return -1; + } + + /* Generate Primary GPT header (LBA1) */ + ret = gpt_fill_header(dev_desc, gpt_h, str_disk_guid, parts_count); + if (ret) + goto err; + + /* Generate partition entries */ + ret = gpt_fill_pte(gpt_h, gpt_e, partitions, parts_count); + if (ret) + goto err; + + /* Write GPT partition table */ + ret = write_gpt_table(dev_desc, gpt_h, gpt_e); + +err: + free(gpt_e); + free(gpt_h); + return ret; +} +#endif + /* * Private functions */ @@ -264,7 +511,7 @@ int test_part_efi(block_dev_desc_t * dev_desc) static int pmbr_part_valid(struct partition *part) { if (part->sys_ind == EFI_PMBR_OSTYPE_EFI_GPT && - le32_to_int(part->start_sect) == 1UL) { + le32_to_cpu(part->start_sect) == 1UL) { return 1; } @@ -283,9 +530,8 @@ static int is_pmbr_valid(legacy_mbr * mbr) { int i = 0; - if (!mbr || le16_to_int(mbr->signature) != MSDOS_MBR_SIGNATURE) { + if (!mbr || le16_to_cpu(mbr->signature) != MSDOS_MBR_SIGNATURE) return 0; - } for (i = 0; i < 4; i++) { if (pmbr_part_valid(&mbr->partition_record[i])) { @@ -308,8 +554,8 @@ static int is_pmbr_valid(legacy_mbr * mbr) static int is_gpt_valid(block_dev_desc_t * dev_desc, unsigned long long lba, gpt_header * pgpt_head, gpt_entry ** pgpt_pte) { - unsigned char crc32_backup[4] = { 0 }; - unsigned long calc_crc32; + u32 crc32_backup = 0; + u32 calc_crc32; unsigned long long lastlba; if (!dev_desc || !pgpt_head) { @@ -324,54 +570,54 @@ static int is_gpt_valid(block_dev_desc_t * dev_desc, unsigned long long lba, } /* Check the GPT header signature */ - if (le64_to_int(pgpt_head->signature) != GPT_HEADER_SIGNATURE) { + if (le64_to_cpu(pgpt_head->signature) != GPT_HEADER_SIGNATURE) { printf("GUID Partition Table Header signature is wrong:" "0x%llX != 0x%llX\n", - (unsigned long long)le64_to_int(pgpt_head->signature), - (unsigned long long)GPT_HEADER_SIGNATURE); + le64_to_cpu(pgpt_head->signature), + GPT_HEADER_SIGNATURE); return 0; } /* Check the GUID Partition Table CRC */ - memcpy(crc32_backup, pgpt_head->header_crc32, sizeof(crc32_backup)); - memset(pgpt_head->header_crc32, 0, sizeof(pgpt_head->header_crc32)); + memcpy(&crc32_backup, &pgpt_head->header_crc32, sizeof(crc32_backup)); + memset(&pgpt_head->header_crc32, 0, sizeof(pgpt_head->header_crc32)); calc_crc32 = efi_crc32((const unsigned char *)pgpt_head, - le32_to_int(pgpt_head->header_size)); + le32_to_cpu(pgpt_head->header_size)); - memcpy(pgpt_head->header_crc32, crc32_backup, sizeof(crc32_backup)); + memcpy(&pgpt_head->header_crc32, &crc32_backup, sizeof(crc32_backup)); - if (calc_crc32 != le32_to_int(crc32_backup)) { + if (calc_crc32 != le32_to_cpu(crc32_backup)) { printf("GUID Partition Table Header CRC is wrong:" - "0x%08lX != 0x%08lX\n", - le32_to_int(crc32_backup), calc_crc32); + "0x%x != 0x%x\n", + le32_to_cpu(crc32_backup), calc_crc32); return 0; } /* Check that the my_lba entry points to the LBA that contains the GPT */ - if (le64_to_int(pgpt_head->my_lba) != lba) { + if (le64_to_cpu(pgpt_head->my_lba) != lba) { printf("GPT: my_lba incorrect: %llX != %llX\n", - (unsigned long long)le64_to_int(pgpt_head->my_lba), - (unsigned long long)lba); + le64_to_cpu(pgpt_head->my_lba), + lba); return 0; } /* Check the first_usable_lba and last_usable_lba are within the disk. */ lastlba = (unsigned long long)dev_desc->lba; - if (le64_to_int(pgpt_head->first_usable_lba) > lastlba) { + if (le64_to_cpu(pgpt_head->first_usable_lba) > lastlba) { printf("GPT: first_usable_lba incorrect: %llX > %llX\n", - le64_to_int(pgpt_head->first_usable_lba), lastlba); + le64_to_cpu(pgpt_head->first_usable_lba), lastlba); return 0; } - if (le64_to_int(pgpt_head->last_usable_lba) > lastlba) { + if (le64_to_cpu(pgpt_head->last_usable_lba) > lastlba) { printf("GPT: last_usable_lba incorrect: %llX > %llX\n", - le64_to_int(pgpt_head->last_usable_lba), lastlba); + (u64) le64_to_cpu(pgpt_head->last_usable_lba), lastlba); return 0; } debug("GPT: first_usable_lba: %llX last_usable_lba %llX last lba %llX\n", - le64_to_int(pgpt_head->first_usable_lba), - le64_to_int(pgpt_head->last_usable_lba), lastlba); + le64_to_cpu(pgpt_head->first_usable_lba), + le64_to_cpu(pgpt_head->last_usable_lba), lastlba); /* Read and allocate Partition Table Entries */ *pgpt_pte = alloc_read_gpt_entries(dev_desc, pgpt_head); @@ -382,13 +628,13 @@ static int is_gpt_valid(block_dev_desc_t * dev_desc, unsigned long long lba, /* Check the GUID Partition Table Entry Array CRC */ calc_crc32 = efi_crc32((const unsigned char *)*pgpt_pte, - le32_to_int(pgpt_head->num_partition_entries) * - le32_to_int(pgpt_head->sizeof_partition_entry)); + le32_to_cpu(pgpt_head->num_partition_entries) * + le32_to_cpu(pgpt_head->sizeof_partition_entry)); - if (calc_crc32 != le32_to_int(pgpt_head->partition_entry_array_crc32)) { + if (calc_crc32 != le32_to_cpu(pgpt_head->partition_entry_array_crc32)) { printf("GUID Partition Table Entry Array CRC is wrong:" - "0x%08lX != 0x%08lX\n", - le32_to_int(pgpt_head->partition_entry_array_crc32), + "0x%x != 0x%x\n", + le32_to_cpu(pgpt_head->partition_entry_array_crc32), calc_crc32); free(*pgpt_pte); @@ -419,12 +665,12 @@ static gpt_entry *alloc_read_gpt_entries(block_dev_desc_t * dev_desc, return NULL; } - count = le32_to_int(pgpt_head->num_partition_entries) * - le32_to_int(pgpt_head->sizeof_partition_entry); + count = le32_to_cpu(pgpt_head->num_partition_entries) * + le32_to_cpu(pgpt_head->sizeof_partition_entry); - debug("%s: count = %lu * %lu = %zu\n", __func__, - le32_to_int(pgpt_head->num_partition_entries), - le32_to_int(pgpt_head->sizeof_partition_entry), count); + debug("%s: count = %u * %u = %zu\n", __func__, + (u32) le32_to_cpu(pgpt_head->num_partition_entries), + (u32) le32_to_cpu(pgpt_head->sizeof_partition_entry), count); /* Allocate memory for PTE, remember to FREE */ if (count != 0) { @@ -440,7 +686,7 @@ static gpt_entry *alloc_read_gpt_entries(block_dev_desc_t * dev_desc, /* Read GPT Entries from device */ if (dev_desc->block_read (dev_desc->dev, - (unsigned long)le64_to_int(pgpt_head->partition_entry_lba), + le64_to_cpu(pgpt_head->partition_entry_lba), (lbaint_t) (count / GPT_BLOCK_SIZE), pte) != (count / GPT_BLOCK_SIZE)) { diff --git a/doc/README.gpt b/doc/README.gpt new file mode 100644 index 0000000..a9c58b4 --- /dev/null +++ b/doc/README.gpt @@ -0,0 +1,201 @@ +# +# Copyright (C) 2012 Samsung Electronics +# +# Lukasz Majewski <l.majewski@samsung.com> +# +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA + + +Glossary: +======== +- UUID -(Universally Unique Identifier) +- GUID - (Globally Unique ID) +- EFI - (Extensible Firmware Interface) +- UEFI - (Unified EFI) - EFI evolution +- GPT (GUID Partition Table) - it is the EFI standard part +- partitions - lists of available partitions (defined at u-boot): + ./include/configs/{target}.h + +Introduction: +============= +This document describes the GPT partition table format and usage of +the gpt command in u-boot. + + +UUID introduction: +==================== + +GPT for marking disks/partitions is using the UUID. It is supposed to be a +globally unique value. A UUID is a 16-byte (128-bit) number. The number of +theoretically possible UUIDs is therefore about 3 x 10^38. +More often UUID is displayed as 32 hexadecimal digits, in 5 groups, +separated by hyphens, in the form 8-4-4-4-12 for a total of 36 characters +(32 digits and 4 hyphens) + +For instance, GUID of Linux data partition: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 + +Historically there are 5 methods to generate this number. The oldest one is +combining machine's MAC address and timer (epoch) value. + +Successive versions are using MD5 hash, random numbers and SHA-1 hash. All major +OSes and programming languages are providing libraries to compute UUID (e.g. +uuid command line tool). + +GPT brief explanation: +====================== + + Layout: + ------- + + -------------------------------------------------- + LBA 0 |Protective MBR | + ---------------------------------------------------------- + LBA 1 |Primary GPT Header | Primary + -------------------------------------------------- GPT + LBA 2 |Entry 1|Entry 2| Entry 3| Entry 4| + -------------------------------------------------- + LBA 3 |Entries 5 - 128 | + | | + | | + ---------------------------------------------------------- + LBA 34 |Partition 1 | + | | + ----------------------------------- + |Partition 2 | + | | + ----------------------------------- + |Partition n | + | | + ---------------------------------------------------------- + LBA -34 |Entry 1|Entry 2| Entry 3| Entry 4| Secondary + -------------------------------------------------- (bkp) + LBA -33 |Entries 5 - 128 | GPT + | | + | | + LBA -2 | | + -------------------------------------------------- + LBA -1 |Secondary GPT Header | + ---------------------------------------------------------- + + +For a legacy reasons, GPT's LBA 0 sector has a MBR structure. It is called +"protective MBR". +Its first partition entry ID has 0xEE value, and disk software, which is not +handling the GPT sees it as a storage device without free space. + +It is possible to define 128 linearly placed partition entries. + +"LBA -1" means the last addressable block (in the mmc subsystem: +"dev_desc->lba - 1") + +Primary/Secondary GPT header: +---------------------------- +Offset Size Description + +0 8 B Signature ("EFI PART", 45 46 49 20 50 41 52 54) +8 4 B Revision (For version 1.0, the value is 00 00 01 00) +12 4 B Header size (in bytes, usually 5C 00 00 00 meaning 92 bytes) +16 4 B CRC32 of header (0 to header size), with this field zeroed + during calculation +20 4 B Reserved (ZERO); +24 8 B Current LBA (location of this header copy) +32 8 B Backup LBA (location of the other header copy) +40 8 B First usable LBA for partitions (primary partition table last + LBA + 1) +48 8 B Last usable LBA (secondary partition table first LBA - 1) +56 16 B Disk GUID (also referred as UUID on UNIXes) +72 8 B Partition entries starting LBA (always 2 in primary copy) +80 4 B Number of partition entries +84 4 B Size of a partition entry (usually 128) +88 4 B CRC32 of partition array +92 * Reserved; must be ZERO (420 bytes for a 512-byte LBA) + +TOTAL: 512 B + + + +IMPORTANT: + +GPT headers and partition entries are protected by CRC32 (the POSIX CRC32). + +Primary GPT header and Secondary GPT header have swapped values of "Current LBA" +and "Backup LBA" and therefore different CRC32 check-sum. + +CRC32 for GPT headers (field "CRC of header") are calculated up till +"Header size" (92), NOT 512 bytes. + +CRC32 for partition entries (field "CRC32 of partition array") is calculated for +the whole array entry ( Number_of_partition_entries * +sizeof(partition_entry_size (usually 128))) + +Observe, how Secondary GPT is placed in the memory. It is NOT a mirror reflect +of the Primary. + + + Partition Entry Format: + ---------------------- + Offset Size Description + + 0 16 B Partition type GUID + 16 16 B Unique partition GUID + 32 8 B First LBA (Little Endian) + 40 8 B Last LBA (inclusive) + 48 8 B Attribute flags [+] + 56 72 B Partition name (text) + + Attribute flags: + Bit 0 - System partition + Bit 60 - Read-only + Bit 62 - Hidden + Bit 63 - Not mount + + +Creating GPT partitions in U-Boot: +============== + +To restore GUID partition table one needs to: +1. Define partition layout in the environment. + Format of partitions layout: + "partitions=uuid_disk=...;name=u-boot,size=60MiB,uuid=...; + name=kernel,size=60MiB,uuid=...;" + or + "partitions=uuid_disk=${uuid_gpt_disk};name=${uboot_name}, + size=${uboot_size},uuid=${uboot_uuid};" + + Fields 'name', 'size' and 'uuid' are mandatory for every partition. + The field 'start' is optional. + +2. Define 'CONFIG_EFI_PARTITION' and 'CONFIG_CMD_GPT' + +2. From u-boot prompt type: + gpt write mmc 0 $partitions + + +Useful info: +============ + +Two programs, namely: 'fdisk' and 'parted' are recommended to work with GPT +recovery. Parted is able to handle GUID partitions. Unfortunately the 'fdisk' +hasn't got such ability. +Please, pay attention at -l switch for parted. + +"uuid" program is recommended to generate UUID string. Moreover it can decode +(-d switch) passed in UUID string. It can be used to generate partitions UUID +passed to u-boot environment variables. diff --git a/doc/README.silent b/doc/README.silent index a26e3df..70202ce 100644 --- a/doc/README.silent +++ b/doc/README.silent @@ -1,9 +1,15 @@ The config option CONFIG_SILENT_CONSOLE can be used to quiet messages on the console. If the option has been enabled, the output can be -silenced by setting the environment variable "silent". The variable -is latched into the global data at an early stage in the boot process -so deleting it with "setenv" will not take effect until the system is -restarted. +silenced by setting the environment variable "silent". + +- CONFIG_SILENT_CONSOLE_UPDATE_ON_SET + When the "silent" variable is changed with env set, the change + will take effect immediately. + +- CONFIG_SILENT_CONSOLE_UPDATE_ON_RELOC + Some environments are not available until relocation (e.g. NAND) + so this will make the value in the flash env take effect at + relocation. The following actions are taken if "silent" is set at boot time: diff --git a/doc/device-tree-bindings/pwm/tegra20-pwm.txt b/doc/device-tree-bindings/pwm/tegra20-pwm.txt new file mode 100644 index 0000000..01438ec --- /dev/null +++ b/doc/device-tree-bindings/pwm/tegra20-pwm.txt @@ -0,0 +1,18 @@ +Tegra SoC PWFM controller + +Required properties: +- compatible: should be one of: + - "nvidia,tegra20-pwm" + - "nvidia,tegra30-pwm" +- reg: physical base address and length of the controller's registers +- #pwm-cells: On Tegra the number of cells used to specify a PWM is 2. The + first cell specifies the per-chip index of the PWM to use and the second + cell is the period in nanoseconds. + +Example: + + pwm: pwm@7000a000 { + compatible = "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + }; diff --git a/doc/device-tree-bindings/video/displaymode.txt b/doc/device-tree-bindings/video/displaymode.txt new file mode 100644 index 0000000..45ca42d --- /dev/null +++ b/doc/device-tree-bindings/video/displaymode.txt @@ -0,0 +1,42 @@ +videomode bindings +================== + +(from http://lists.freedesktop.org/archives/dri-devel/2012-July/024875.html) + +Required properties: + - xres, yres: Display resolution + - left-margin, right-margin, hsync-len: Horizontal Display timing + parameters in pixels + - upper-margin, lower-margin, vsync-len: Vertical display timing + parameters in lines + - clock: display clock in Hz + +Optional properties: + - width-mm, height-mm: Display dimensions in mm + - hsync-active-high (bool): Hsync pulse is active high + - vsync-active-high (bool): Vsync pulse is active high + - interlaced (bool): This is an interlaced mode + - doublescan (bool): This is a doublescan mode + +There are different ways of describing a display mode. The devicetree +representation corresponds to the one used by the Linux Framebuffer +framework described here in Documentation/fb/framebuffer.txt. This +representation has been chosen because it's the only format which does +not allow for inconsistent parameters. Unlike the Framebuffer framework +the devicetree has the clock in Hz instead of ps. + +Example: + + display@0 { + /* 1920x1080p24 */ + clock = <52000000>; + xres = <1920>; + yres = <1080>; + left-margin = <25>; + right-margin = <25>; + hsync-len = <25>; + lower-margin = <2>; + upper-margin = <2>; + vsync-len = <2>; + hsync-active-high; + }; diff --git a/doc/device-tree-bindings/video/tegra20-dc.txt b/doc/device-tree-bindings/video/tegra20-dc.txt new file mode 100644 index 0000000..4731c3f --- /dev/null +++ b/doc/device-tree-bindings/video/tegra20-dc.txt @@ -0,0 +1,85 @@ +Display Controller +------------------ + +(there isn't yet a generic binding in Linux, so this describes what is in +U-Boot, and may change based on Linux activity) + +The device node for a display device is as described in the document +"Open Firmware Recommended Practice : Universal Serial Bus" with the +following modifications and additions : + +Required properties : + - compatible : Should be "nvidia,tegra20-dc" + +Required subnode 'rgb' is as follows: + +Required properties (rgb) : + - nvidia,panel : phandle of LCD panel information + + +The panel node describes the panel itself. This has the properties listed in +displaymode.txt as well as: + +Required properties (panel) : + - nvidia,bits-per-pixel: number of bits per pixel (depth) + - nvidia,pwm : pwm to use to set display contrast (see tegra20-pwm.txt) + - nvidia,panel-timings: 4 cells containing required timings in ms: + * delay before asserting panel_vdd + * delay between panel_vdd-rise and data-rise + * delay between data-rise and backlight_vdd-rise + * delay between backlight_vdd and pwm-rise + * delay between pwm-rise and backlight_en-rise + +Optional GPIO properies all have (phandle, GPIO number, flags): + - nvidia,backlight-enable-gpios: backlight enable GPIO + - nvidia,lvds-shutdown-gpios: LVDS power shutdown GPIO + - nvidia,backlight-vdd-gpios: backlight power GPIO + - nvidia,panel-vdd-gpios: panel power GPIO + +Example: + +host1x { + compatible = "nvidia,tegra20-host1x", "simple-bus"; + reg = <0x50000000 0x00024000>; + interrupts = <0 65 0x04 /* mpcore syncpt */ + 0 67 0x04>; /* mpcore general */ + + #address-cells = <1>; + #size-cells = <1>; + status = "okay"; + + ranges = <0x54000000 0x54000000 0x04000000>; + + dc@54200000 { + compatible = "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <0 73 0x04>; + status = "okay"; + + rgb { + status = "okay"; + nvidia,panel = <&lcd_panel>; + }; + }; +}; + +lcd_panel: panel { + /* Seaboard has 1366x768 */ + clock = <70600000>; + xres = <1366>; + yres = <768>; + left-margin = <58>; + right-margin = <58>; + hsync-len = <58>; + lower-margin = <4>; + upper-margin = <4>; + vsync-len = <4>; + hsync-active-high; + nvidia,bits-per-pixel = <16>; + nvidia,pwm = <&pwm 2 0>; + nvidia,backlight-enable-gpios = <&gpio 28 0>; /* PD4 */ + nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ + nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ + nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ + nvidia,panel-timings = <400 4 203 17 15>; +}; diff --git a/drivers/gpio/omap_gpio.c b/drivers/gpio/omap_gpio.c index fc89f2a..a30d7f0 100644 --- a/drivers/gpio/omap_gpio.c +++ b/drivers/gpio/omap_gpio.c @@ -53,18 +53,14 @@ static inline int get_gpio_index(int gpio) return gpio & 0x1f; } -static inline int gpio_valid(int gpio) +int gpio_is_valid(int gpio) { - if (gpio < 0) - return -1; - if (gpio < 192) - return 0; - return -1; + return (gpio >= 0) && (gpio < 192); } static int check_gpio(int gpio) { - if (gpio_valid(gpio) < 0) { + if (!gpio_is_valid(gpio)) { printf("ERROR : check_gpio: invalid GPIO %d\n", gpio); return -1; } diff --git a/drivers/gpio/s5p_gpio.c b/drivers/gpio/s5p_gpio.c index 47f3213..656bf4a 100644 --- a/drivers/gpio/s5p_gpio.c +++ b/drivers/gpio/s5p_gpio.c @@ -144,9 +144,11 @@ void s5p_gpio_set_rate(struct s5p_gpio_bank *bank, int gpio, int mode) struct s5p_gpio_bank *s5p_gpio_get_bank(unsigned gpio) { - int bank = gpio / GPIO_PER_BANK; - bank *= sizeof(struct s5p_gpio_bank); + int bank; + unsigned g = gpio - s5p_gpio_part_max(gpio); + bank = g / GPIO_PER_BANK; + bank *= sizeof(struct s5p_gpio_bank); return (struct s5p_gpio_bank *) (s5p_gpio_base(gpio) + bank); } diff --git a/drivers/i2c/designware_i2c.c b/drivers/i2c/designware_i2c.c index bf64a2a..6653870 100644 --- a/drivers/i2c/designware_i2c.c +++ b/drivers/i2c/designware_i2c.c @@ -26,7 +26,12 @@ #include <asm/arch/hardware.h> #include "designware_i2c.h" -static struct i2c_regs *const i2c_regs_p = +#ifdef CONFIG_I2C_MULTI_BUS +static unsigned int bus_initialized[CONFIG_SYS_I2C_BUS_MAX]; +static unsigned int current_bus = 0; +#endif + +static struct i2c_regs *i2c_regs_p = (struct i2c_regs *)CONFIG_SYS_I2C_BASE; /* @@ -39,7 +44,6 @@ static void set_speed(int i2c_spd) { unsigned int cntl; unsigned int hcnt, lcnt; - unsigned int high, low; unsigned int enbl; /* to set speed cltr must be disabled */ @@ -47,39 +51,38 @@ static void set_speed(int i2c_spd) enbl &= ~IC_ENABLE_0B; writel(enbl, &i2c_regs_p->ic_enable); - cntl = (readl(&i2c_regs_p->ic_con) & (~IC_CON_SPD_MSK)); switch (i2c_spd) { case IC_SPEED_MODE_MAX: cntl |= IC_CON_SPD_HS; - high = MIN_HS_SCL_HIGHTIME; - low = MIN_HS_SCL_LOWTIME; + hcnt = (IC_CLK * MIN_HS_SCL_HIGHTIME) / NANO_TO_MICRO; + writel(hcnt, &i2c_regs_p->ic_hs_scl_hcnt); + lcnt = (IC_CLK * MIN_HS_SCL_LOWTIME) / NANO_TO_MICRO; + writel(lcnt, &i2c_regs_p->ic_hs_scl_lcnt); break; case IC_SPEED_MODE_STANDARD: cntl |= IC_CON_SPD_SS; - high = MIN_SS_SCL_HIGHTIME; - low = MIN_SS_SCL_LOWTIME; + hcnt = (IC_CLK * MIN_SS_SCL_HIGHTIME) / NANO_TO_MICRO; + writel(hcnt, &i2c_regs_p->ic_ss_scl_hcnt); + lcnt = (IC_CLK * MIN_SS_SCL_LOWTIME) / NANO_TO_MICRO; + writel(lcnt, &i2c_regs_p->ic_ss_scl_lcnt); break; case IC_SPEED_MODE_FAST: default: cntl |= IC_CON_SPD_FS; - high = MIN_FS_SCL_HIGHTIME; - low = MIN_FS_SCL_LOWTIME; + hcnt = (IC_CLK * MIN_FS_SCL_HIGHTIME) / NANO_TO_MICRO; + writel(hcnt, &i2c_regs_p->ic_fs_scl_hcnt); + lcnt = (IC_CLK * MIN_FS_SCL_LOWTIME) / NANO_TO_MICRO; + writel(lcnt, &i2c_regs_p->ic_fs_scl_lcnt); break; } writel(cntl, &i2c_regs_p->ic_con); - hcnt = (IC_CLK * high) / NANO_TO_MICRO; - writel(hcnt, &i2c_regs_p->ic_fs_scl_hcnt); - - lcnt = (IC_CLK * low) / NANO_TO_MICRO; - writel(lcnt, &i2c_regs_p->ic_fs_scl_lcnt); - - /* re-enable i2c ctrl back now that speed is set */ + /* Enable back i2c now speed set */ enbl |= IC_ENABLE_0B; writel(enbl, &i2c_regs_p->ic_enable); } @@ -150,6 +153,10 @@ void i2c_init(int speed, int slaveadd) enbl = readl(&i2c_regs_p->ic_enable); enbl |= IC_ENABLE_0B; writel(enbl, &i2c_regs_p->ic_enable); + +#ifdef CONFIG_I2C_MULTI_BUS + bus_initialized[current_bus] = 1; +#endif } /* @@ -274,7 +281,10 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len) start_time_rx = get_timer(0); while (len) { - writel(IC_CMD, &i2c_regs_p->ic_cmd_data); + if (len == 1) + writel(IC_CMD | IC_STOP, &i2c_regs_p->ic_cmd_data); + else + writel(IC_CMD, &i2c_regs_p->ic_cmd_data); if (readl(&i2c_regs_p->ic_status) & IC_STATUS_RFNE) { *buffer++ = (uchar)readl(&i2c_regs_p->ic_cmd_data); @@ -313,9 +323,11 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) start_time_tx = get_timer(0); while (len) { if (readl(&i2c_regs_p->ic_status) & IC_STATUS_TFNF) { - writel(*buffer, &i2c_regs_p->ic_cmd_data); + if (--len == 0) + writel(*buffer | IC_STOP, &i2c_regs_p->ic_cmd_data); + else + writel(*buffer, &i2c_regs_p->ic_cmd_data); buffer++; - len--; start_time_tx = get_timer(0); } else if (get_timer(start_time_tx) > (nb * I2C_BYTE_TO)) { @@ -344,3 +356,74 @@ int i2c_probe(uchar chip) return ret; } + +#ifdef CONFIG_I2C_MULTI_BUS +int i2c_set_bus_num(unsigned int bus) +{ + switch (bus) { + case 0: + i2c_regs_p = (void *)CONFIG_SYS_I2C_BASE; + break; +#ifdef CONFIG_SYS_I2C_BASE1 + case 1: + i2c_regs_p = (void *)CONFIG_SYS_I2C_BASE1; + break; +#endif +#ifdef CONFIG_SYS_I2C_BASE2 + case 2: + i2c_regs_p = (void *)CONFIG_SYS_I2C_BASE2; + break; +#endif +#ifdef CONFIG_SYS_I2C_BASE3 + case 3: + i2c_regs_p = (void *)CONFIG_SYS_I2C_BASE3; + break; +#endif +#ifdef CONFIG_SYS_I2C_BASE4 + case 4: + i2c_regs_p = (void *)CONFIG_SYS_I2C_BASE4; + break; +#endif +#ifdef CONFIG_SYS_I2C_BASE5 + case 5: + i2c_regs_p = (void *)CONFIG_SYS_I2C_BASE5; + break; +#endif +#ifdef CONFIG_SYS_I2C_BASE6 + case 6: + i2c_regs_p = (void *)CONFIG_SYS_I2C_BASE6; + break; +#endif +#ifdef CONFIG_SYS_I2C_BASE7 + case 7: + i2c_regs_p = (void *)CONFIG_SYS_I2C_BASE7; + break; +#endif +#ifdef CONFIG_SYS_I2C_BASE8 + case 8: + i2c_regs_p = (void *)CONFIG_SYS_I2C_BASE8; + break; +#endif +#ifdef CONFIG_SYS_I2C_BASE9 + case 9: + i2c_regs_p = (void *)CONFIG_SYS_I2C_BASE9; + break; +#endif + default: + printf("Bad bus: %d\n", bus); + return -1; + } + + current_bus = bus; + + if (!bus_initialized[current_bus]) + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + + return 0; +} + +int i2c_get_bus_num(void) +{ + return current_bus; +} +#endif diff --git a/drivers/i2c/designware_i2c.h b/drivers/i2c/designware_i2c.h index 03b520e..2faf4a8 100644 --- a/drivers/i2c/designware_i2c.h +++ b/drivers/i2c/designware_i2c.h @@ -60,14 +60,16 @@ struct i2c_regs { u32 ic_tx_abrt_source; }; +#if !defined(IC_CLK) #define IC_CLK 166 +#endif #define NANO_TO_MICRO 1000 /* High and low times in different speed modes (in ns) */ #define MIN_SS_SCL_HIGHTIME 4000 -#define MIN_SS_SCL_LOWTIME 5000 -#define MIN_FS_SCL_HIGHTIME 800 -#define MIN_FS_SCL_LOWTIME 1700 +#define MIN_SS_SCL_LOWTIME 4700 +#define MIN_FS_SCL_HIGHTIME 600 +#define MIN_FS_SCL_LOWTIME 1300 #define MIN_HS_SCL_HIGHTIME 60 #define MIN_HS_SCL_LOWTIME 160 @@ -95,6 +97,7 @@ struct i2c_regs { /* i2c data buffer and command register definitions */ #define IC_CMD 0x0100 +#define IC_STOP 0x0200 /* i2c interrupt status register definitions */ #define IC_GEN_CALL 0x0800 diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c index 18270b9..a73b10b 100644 --- a/drivers/i2c/mxc_i2c.c +++ b/drivers/i2c/mxc_i2c.c @@ -115,7 +115,7 @@ static uint8_t i2c_imx_get_clk(unsigned int rate) /* * Set I2C Bus speed */ -int bus_i2c_set_bus_speed(void *base, int speed) +static int bus_i2c_set_bus_speed(void *base, int speed) { struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base; u8 clk_idx = i2c_imx_get_clk(speed); @@ -133,7 +133,7 @@ int bus_i2c_set_bus_speed(void *base, int speed) /* * Get I2C Speed */ -unsigned int bus_i2c_get_bus_speed(void *base) +static unsigned int bus_i2c_get_bus_speed(void *base) { struct mxc_i2c_regs *i2c_regs = (struct mxc_i2c_regs *)base; u8 clk_idx = readb(&i2c_regs->ifdr); diff --git a/drivers/i2c/mxs_i2c.c b/drivers/i2c/mxs_i2c.c index 2a193c2..b907f7b 100644 --- a/drivers/i2c/mxs_i2c.c +++ b/drivers/i2c/mxs_i2c.c @@ -28,6 +28,7 @@ #include <common.h> #include <malloc.h> +#include <i2c.h> #include <asm/errno.h> #include <asm/io.h> #include <asm/arch/clock.h> @@ -40,6 +41,7 @@ void mxs_i2c_reset(void) { struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE; int ret; + int speed = i2c_get_bus_speed(); ret = mxs_reset_block(&i2c_regs->hw_i2c_ctrl0_reg); if (ret) { @@ -53,6 +55,8 @@ void mxs_i2c_reset(void) &i2c_regs->hw_i2c_ctrl1_clr); writel(I2C_QUEUECTRL_PIO_QUEUE_MODE, &i2c_regs->hw_i2c_queuectrl_set); + + i2c_set_bus_speed(speed); } void mxs_i2c_setup_read(uint8_t chip, int len) @@ -210,37 +214,65 @@ int i2c_probe(uchar chip) return ret; } -void i2c_init(int speed, int slaveadd) +int i2c_set_bus_speed(unsigned int speed) { struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE; + /* + * The timing derivation algorithm. There is no documentation for this + * algorithm available, it was derived by using the scope and fiddling + * with constants until the result observed on the scope was good enough + * for 20kHz, 50kHz, 100kHz, 200kHz, 300kHz and 400kHz. It should be + * possible to assume the algorithm works for other frequencies as well. + * + * Note it was necessary to cap the frequency on both ends as it's not + * possible to configure completely arbitrary frequency for the I2C bus + * clock. + */ + uint32_t clk = mxc_get_clock(MXC_XTAL_CLK); + uint32_t base = ((clk / speed) - 38) / 2; + uint16_t high_count = base + 3; + uint16_t low_count = base - 3; + uint16_t rcv_count = (high_count * 3) / 4; + uint16_t xmit_count = low_count / 4; + + if (speed > 540000) { + printf("MXS I2C: Speed too high (%d Hz)\n", speed); + return -EINVAL; + } - mxs_i2c_reset(); - - switch (speed) { - case 100000: - writel((0x0078 << I2C_TIMING0_HIGH_COUNT_OFFSET) | - (0x0030 << I2C_TIMING0_RCV_COUNT_OFFSET), - &i2c_regs->hw_i2c_timing0); - writel((0x0080 << I2C_TIMING1_LOW_COUNT_OFFSET) | - (0x0030 << I2C_TIMING1_XMIT_COUNT_OFFSET), - &i2c_regs->hw_i2c_timing1); - break; - case 400000: - writel((0x000f << I2C_TIMING0_HIGH_COUNT_OFFSET) | - (0x0007 << I2C_TIMING0_RCV_COUNT_OFFSET), - &i2c_regs->hw_i2c_timing0); - writel((0x001f << I2C_TIMING1_LOW_COUNT_OFFSET) | - (0x000f << I2C_TIMING1_XMIT_COUNT_OFFSET), - &i2c_regs->hw_i2c_timing1); - break; - default: - printf("MXS I2C: Invalid speed selected (%d Hz)\n", speed); - return; + if (speed < 12000) { + printf("MXS I2C: Speed too low (%d Hz)\n", speed); + return -EINVAL; } - writel((0x0015 << I2C_TIMING2_BUS_FREE_OFFSET) | - (0x000d << I2C_TIMING2_LEADIN_COUNT_OFFSET), + writel((high_count << 16) | rcv_count, &i2c_regs->hw_i2c_timing0); + writel((low_count << 16) | xmit_count, &i2c_regs->hw_i2c_timing1); + + writel((0x0030 << I2C_TIMING2_BUS_FREE_OFFSET) | + (0x0030 << I2C_TIMING2_LEADIN_COUNT_OFFSET), &i2c_regs->hw_i2c_timing2); + return 0; +} + +unsigned int i2c_get_bus_speed(void) +{ + struct mxs_i2c_regs *i2c_regs = (struct mxs_i2c_regs *)MXS_I2C0_BASE; + uint32_t clk = mxc_get_clock(MXC_XTAL_CLK); + uint32_t timing0; + + timing0 = readl(&i2c_regs->hw_i2c_timing0); + /* + * This is a reverse version of the algorithm presented in + * i2c_set_bus_speed(). Please refer there for details. + */ + return clk / ((((timing0 >> 16) - 3) * 2) + 38); +} + +void i2c_init(int speed, int slaveadd) +{ + mxs_i2c_reset(); + i2c_set_bus_speed(speed); + return; } diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c index 094305f..54e9b15 100644 --- a/drivers/i2c/omap24xx_i2c.c +++ b/drivers/i2c/omap24xx_i2c.c @@ -31,7 +31,7 @@ DECLARE_GLOBAL_DATA_PTR; #define I2C_TIMEOUT 1000 -static void wait_for_bb(void); +static int wait_for_bb(void); static u16 wait_for_pin(void); static void flush_fifo(void); @@ -159,7 +159,8 @@ static int i2c_read_byte(u8 devaddr, u16 regoffset, u8 alen, u8 *value) u16 w; /* wait until bus not busy */ - wait_for_bb(); + if (wait_for_bb()) + return 1; /* one byte only */ writew(alen, &i2c_base->cnt); @@ -179,7 +180,8 @@ static int i2c_read_byte(u8 devaddr, u16 regoffset, u8 alen, u8 *value) if (status & I2C_STAT_XRDY) { w = tmpbuf[i++]; #if !(defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ - defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX)) + defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \ + defined(CONFIG_OMAP54XX)) w |= tmpbuf[i++] << 8; #endif writew(w, &i2c_base->data); @@ -209,7 +211,8 @@ static int i2c_read_byte(u8 devaddr, u16 regoffset, u8 alen, u8 *value) } if (status & I2C_STAT_RRDY) { #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ - defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) + defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \ + defined(CONFIG_OMAP54XX) *value = readb(&i2c_base->data); #else *value = readw(&i2c_base->data); @@ -239,7 +242,8 @@ static void flush_fifo(void) stat = readw(&i2c_base->stat); if (stat == I2C_STAT_RRDY) { #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ - defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) + defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \ + defined(CONFIG_OMAP54XX) readb(&i2c_base->data); #else readw(&i2c_base->data); @@ -260,7 +264,8 @@ int i2c_probe(uchar chip) return res; /* wait until bus not busy */ - wait_for_bb(); + if (wait_for_bb()) + return res; /* try to read one byte */ writew(1, &i2c_base->cnt); @@ -279,7 +284,10 @@ int i2c_probe(uchar chip) res = 1; writew(0xff, &i2c_base->stat); writew (readw (&i2c_base->con) | I2C_CON_STP, &i2c_base->con); - wait_for_bb (); + + if (wait_for_bb()) + res = 1; + break; } if (status & I2C_STAT_ARDY) { @@ -289,7 +297,8 @@ int i2c_probe(uchar chip) if (status & I2C_STAT_RRDY) { res = 0; #if defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ - defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) + defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \ + defined(CONFIG_OMAP54XX) readb(&i2c_base->data); #else readw(&i2c_base->data); @@ -351,7 +360,8 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) } /* wait until bus not busy */ - wait_for_bb(); + if (wait_for_bb()) + return 1; /* start address phase - will write regoffset + len bytes data */ /* TODO consider case when !CONFIG_OMAP243X/34XX/44XX */ @@ -376,7 +386,8 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len) if (status & I2C_STAT_XRDY) { w = (i < 0) ? tmpbuf[2+i] : buffer[i]; #if !(defined(CONFIG_OMAP243X) || defined(CONFIG_OMAP34XX) || \ - defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX)) + defined(CONFIG_OMAP44XX) || defined(CONFIG_AM33XX) || \ + defined(CONFIG_OMAP54XX)) w |= ((++i < 0) ? tmpbuf[2+i] : buffer[i]) << 8; #endif writew(w, &i2c_base->data); @@ -394,7 +405,7 @@ write_exit: return i2c_error; } -static void wait_for_bb(void) +static int wait_for_bb(void) { int timeout = I2C_TIMEOUT; u16 stat; @@ -408,8 +419,10 @@ static void wait_for_bb(void) if (timeout <= 0) { printf("timed out in wait_for_bb: I2C_STAT=%x\n", readw(&i2c_base->stat)); + return 1; } writew(0xFFFF, &i2c_base->stat); /* clear delayed stuff*/ + return 0; } static u16 wait_for_pin(void) diff --git a/drivers/i2c/s3c24x0_i2c.c b/drivers/i2c/s3c24x0_i2c.c index 9bc4c7f..90d297a 100644 --- a/drivers/i2c/s3c24x0_i2c.c +++ b/drivers/i2c/s3c24x0_i2c.c @@ -27,7 +27,7 @@ */ #include <common.h> -#ifdef CONFIG_EXYNOS5 +#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) #include <asm/arch/clk.h> #include <asm/arch/cpu.h> #else @@ -62,7 +62,7 @@ static unsigned int g_current_bus; /* Stores Current I2C Bus */ -#ifndef CONFIG_EXYNOS5 +#if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) static int GetI2CSDA(void) { struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); @@ -121,7 +121,12 @@ static void ReadWriteByte(struct s3c24x0_i2c *i2c) static struct s3c24x0_i2c *get_base_i2c(void) { -#ifdef CONFIG_EXYNOS5 +#ifdef CONFIG_EXYNOS4 + struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c() + + (EXYNOS4_I2C_SPACING + * g_current_bus)); + return i2c; +#elif defined CONFIG_EXYNOS5 struct s3c24x0_i2c *i2c = (struct s3c24x0_i2c *)(samsung_get_base_i2c() + (EXYNOS5_I2C_SPACING * g_current_bus)); @@ -134,7 +139,7 @@ static struct s3c24x0_i2c *get_base_i2c(void) static void i2c_ch_init(struct s3c24x0_i2c *i2c, int speed, int slaveadd) { ulong freq, pres = 16, div; -#ifdef CONFIG_EXYNOS5 +#if (defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) freq = get_i2c_clk(); #else freq = get_PCLK(); @@ -188,7 +193,7 @@ unsigned int i2c_get_bus_num(void) void i2c_init(int speed, int slaveadd) { struct s3c24x0_i2c *i2c; -#ifndef CONFIG_EXYNOS5 +#if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio(); #endif int i; @@ -204,7 +209,7 @@ void i2c_init(int speed, int slaveadd) i--; } -#ifndef CONFIG_EXYNOS5 +#if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) if ((readl(&i2c->iicstat) & I2CSTAT_BSY) || GetI2CSDA() == 0) { #ifdef CONFIG_S3C2410 ulong old_gpecon = readl(&gpio->gpecon); @@ -248,7 +253,7 @@ void i2c_init(int speed, int slaveadd) writel(old_gpecon, &gpio->pgcon); #endif } -#endif /* #ifndef CONFIG_EXYNOS5 */ +#endif /* #if !(defined CONFIG_EXYNOS4 || defined CONFIG_EXYNOS5) */ i2c_ch_init(i2c, speed, slaveadd); } diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c index 1595c07..ae3c573 100644 --- a/drivers/i2c/soft_i2c.c +++ b/drivers/i2c/soft_i2c.c @@ -30,6 +30,9 @@ #include <ioports.h> #include <asm/io.h> #endif +#if defined(CONFIG_AVR32) +#include <asm/arch/portmux.h> +#endif #if defined(CONFIG_AT91FAMILY) #include <asm/io.h> #include <asm/arch/hardware.h> diff --git a/drivers/input/tegra-kbc.c b/drivers/input/tegra-kbc.c index ab7a9e3..88471d3 100644 --- a/drivers/input/tegra-kbc.c +++ b/drivers/input/tegra-kbc.c @@ -63,6 +63,7 @@ static struct keyb { struct kbc_tegra *kbc; /* tegra keyboard controller */ unsigned char inited; /* 1 if keyboard has been inited */ unsigned char first_scan; /* 1 if this is our first key scan */ + unsigned char created; /* 1 if driver has been created */ /* * After init we must wait a short time before polling the keyboard. @@ -306,6 +307,10 @@ static void tegra_kbc_open(void) */ static int init_tegra_keyboard(void) { + /* check if already created */ + if (config.created) + return 0; + #ifdef CONFIG_OF_CONTROL int node; @@ -349,6 +354,7 @@ static int init_tegra_keyboard(void) config_kbc_gpio(config.kbc); tegra_kbc_open(); + config.created = 1; debug("%s: Tegra keyboard ready\n", __func__); return 0; @@ -357,6 +363,8 @@ static int init_tegra_keyboard(void) int drv_keyboard_init(void) { struct stdio_dev dev; + char *stdinname = getenv("stdin"); + int error; if (input_init(&config.input, 0)) { debug("%s: Cannot set up input\n", __func__); @@ -372,5 +380,13 @@ int drv_keyboard_init(void) dev.start = init_tegra_keyboard; /* Register the device. init_tegra_keyboard() will be called soon */ - return input_stdio_register(&dev); + error = input_stdio_register(&dev); + if (error) + return error; +#ifdef CONFIG_CONSOLE_MUX + error = iomux_doenv(stdin, stdinname); + if (error) + return error; +#endif + return 0; } diff --git a/drivers/mmc/tegra_mmc.c b/drivers/mmc/tegra_mmc.c index b141eaf..d749ab0 100644 --- a/drivers/mmc/tegra_mmc.c +++ b/drivers/mmc/tegra_mmc.c @@ -565,10 +565,11 @@ int tegra_mmc_init(int dev_index, int bus_width, int pwr_gpio, int cd_gpio) mmc->getcd = tegra_mmc_getcd; mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195; + mmc->host_caps = 0; if (bus_width == 8) - mmc->host_caps = MMC_MODE_8BIT; - else - mmc->host_caps = MMC_MODE_4BIT; + mmc->host_caps |= MMC_MODE_8BIT; + if (bus_width >= 4) + mmc->host_caps |= MMC_MODE_4BIT; mmc->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS | MMC_MODE_HC; /* diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 28e52bd..2c3812c 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -33,6 +33,7 @@ ifdef CONFIG_SPL_NAND_DRIVERS NORMAL_DRIVERS=y endif +COBJS-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o COBJS-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o COBJS-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o COBJS-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o @@ -78,10 +79,6 @@ COBJS-$(CONFIG_TEGRA_NAND) += tegra_nand.o COBJS-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o COBJS-$(CONFIG_NAND_PLAT) += nand_plat.o -else # minimal SPL drivers - -COBJS-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o - endif # drivers endif # nand diff --git a/drivers/mtd/nand/am335x_spl_bch.c b/drivers/mtd/nand/am335x_spl_bch.c new file mode 100644 index 0000000..b84528b --- /dev/null +++ b/drivers/mtd/nand/am335x_spl_bch.c @@ -0,0 +1,238 @@ +/* + * (C) Copyright 2012 + * Konstantin Kozhevnikov, Cogent Embedded + * + * based on nand_spl_simple code + * + * (C) Copyright 2006-2008 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc. + */ + +#include <common.h> +#include <nand.h> +#include <asm/io.h> +#include <linux/mtd/nand_ecc.h> + +static int nand_ecc_pos[] = CONFIG_SYS_NAND_ECCPOS; +static nand_info_t mtd; +static struct nand_chip nand_chip; + +#define ECCSTEPS (CONFIG_SYS_NAND_PAGE_SIZE / \ + CONFIG_SYS_NAND_ECCSIZE) +#define ECCTOTAL (ECCSTEPS * CONFIG_SYS_NAND_ECCBYTES) + + +/* + * NAND command for large page NAND devices (2k) + */ +static int nand_command(int block, int page, uint32_t offs, + u8 cmd) +{ + struct nand_chip *this = mtd.priv; + int page_addr = page + block * CONFIG_SYS_NAND_PAGE_COUNT; + void (*hwctrl)(struct mtd_info *mtd, int cmd, + unsigned int ctrl) = this->cmd_ctrl; + + while (!this->dev_ready(&mtd)) + ; + + /* Emulate NAND_CMD_READOOB */ + if (cmd == NAND_CMD_READOOB) { + offs += CONFIG_SYS_NAND_PAGE_SIZE; + cmd = NAND_CMD_READ0; + } + + /* Begin command latch cycle */ + hwctrl(&mtd, cmd, NAND_CTRL_CLE | NAND_CTRL_CHANGE); + + if (cmd == NAND_CMD_RESET) { + hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + while (!this->dev_ready(&mtd)) + ; + return 0; + } + + /* Shift the offset from byte addressing to word addressing. */ + if (this->options & NAND_BUSWIDTH_16) + offs >>= 1; + + /* Set ALE and clear CLE to start address cycle */ + /* Column address */ + hwctrl(&mtd, offs & 0xff, + NAND_CTRL_ALE | NAND_CTRL_CHANGE); /* A[7:0] */ + hwctrl(&mtd, (offs >> 8) & 0xff, NAND_CTRL_ALE); /* A[11:9] */ + /* Row address */ + hwctrl(&mtd, (page_addr & 0xff), NAND_CTRL_ALE); /* A[19:12] */ + hwctrl(&mtd, ((page_addr >> 8) & 0xff), + NAND_CTRL_ALE); /* A[27:20] */ +#ifdef CONFIG_SYS_NAND_5_ADDR_CYCLE + /* One more address cycle for devices > 128MiB */ + hwctrl(&mtd, (page_addr >> 16) & 0x0f, + NAND_CTRL_ALE); /* A[31:28] */ +#endif + hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + + if (cmd == NAND_CMD_READ0) { + /* Latch in address */ + hwctrl(&mtd, NAND_CMD_READSTART, + NAND_CTRL_CLE | NAND_CTRL_CHANGE); + hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + + /* + * Wait a while for the data to be ready + */ + while (!this->dev_ready(&mtd)) + ; + } else if (cmd == NAND_CMD_RNDOUT) { + hwctrl(&mtd, NAND_CMD_RNDOUTSTART, NAND_CTRL_CLE | + NAND_CTRL_CHANGE); + hwctrl(&mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE); + } + + return 0; +} + +static int nand_is_bad_block(int block) +{ + struct nand_chip *this = mtd.priv; + + nand_command(block, 0, CONFIG_SYS_NAND_BAD_BLOCK_POS, + NAND_CMD_READOOB); + + /* + * Read one byte (or two if it's a 16 bit chip). + */ + if (this->options & NAND_BUSWIDTH_16) { + if (readw(this->IO_ADDR_R) != 0xffff) + return 1; + } else { + if (readb(this->IO_ADDR_R) != 0xff) + return 1; + } + + return 0; +} + +static int nand_read_page(int block, int page, void *dst) +{ + struct nand_chip *this = mtd.priv; + u_char ecc_calc[ECCTOTAL]; + u_char ecc_code[ECCTOTAL]; + u_char oob_data[CONFIG_SYS_NAND_OOBSIZE]; + int i; + int eccsize = CONFIG_SYS_NAND_ECCSIZE; + int eccbytes = CONFIG_SYS_NAND_ECCBYTES; + int eccsteps = ECCSTEPS; + uint8_t *p = dst; + uint32_t data_pos = 0; + uint8_t *oob = &oob_data[0] + nand_ecc_pos[0]; + uint32_t oob_pos = eccsize * eccsteps + nand_ecc_pos[0]; + + nand_command(block, page, 0, NAND_CMD_READ0); + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + this->ecc.hwctl(&mtd, NAND_ECC_READ); + nand_command(block, page, data_pos, NAND_CMD_RNDOUT); + + this->read_buf(&mtd, p, eccsize); + + nand_command(block, page, oob_pos, NAND_CMD_RNDOUT); + + this->read_buf(&mtd, oob, eccbytes); + this->ecc.calculate(&mtd, p, &ecc_calc[i]); + + data_pos += eccsize; + oob_pos += eccbytes; + oob += eccbytes; + } + + /* Pick the ECC bytes out of the oob data */ + for (i = 0; i < ECCTOTAL; i++) + ecc_code[i] = oob_data[nand_ecc_pos[i]]; + + eccsteps = ECCSTEPS; + p = dst; + + for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + /* No chance to do something with the possible error message + * from correct_data(). We just hope that all possible errors + * are corrected by this routine. + */ + this->ecc.correct(&mtd, p, &ecc_code[i], &ecc_calc[i]); + } + + return 0; +} + +int nand_spl_load_image(uint32_t offs, unsigned int size, void *dst) +{ + unsigned int block, lastblock; + unsigned int page; + + /* + * offs has to be aligned to a page address! + */ + block = offs / CONFIG_SYS_NAND_BLOCK_SIZE; + lastblock = (offs + size - 1) / CONFIG_SYS_NAND_BLOCK_SIZE; + page = (offs % CONFIG_SYS_NAND_BLOCK_SIZE) / CONFIG_SYS_NAND_PAGE_SIZE; + + while (block <= lastblock) { + if (!nand_is_bad_block(block)) { + /* + * Skip bad blocks + */ + while (page < CONFIG_SYS_NAND_PAGE_COUNT) { + nand_read_page(block, page, dst); + dst += CONFIG_SYS_NAND_PAGE_SIZE; + page++; + } + + page = 0; + } else { + lastblock++; + } + + block++; + } + + return 0; +} + +/* nand_init() - initialize data to make nand usable by SPL */ +void nand_init(void) +{ + /* + * Init board specific nand support + */ + mtd.priv = &nand_chip; + nand_chip.IO_ADDR_R = nand_chip.IO_ADDR_W = + (void __iomem *)CONFIG_SYS_NAND_BASE; + board_nand_init(&nand_chip); + + if (nand_chip.select_chip) + nand_chip.select_chip(&mtd, 0); + + /* NAND chip may require reset after power-on */ + nand_command(0, 0, 0, NAND_CMD_RESET); +} + +/* Unselect after operation */ +void nand_deselect(void) +{ + if (nand_chip.select_chip) + nand_chip.select_chip(&mtd, -1); +} diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c index 4701be8..e38e151 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/mxs_nand.c @@ -1058,6 +1058,8 @@ int mxs_nand_init(struct mxs_nand_info *info) { struct mxs_gpmi_regs *gpmi_regs = (struct mxs_gpmi_regs *)MXS_GPMI_BASE; + struct mxs_bch_regs *bch_regs = + (struct mxs_bch_regs *)MXS_BCH_BASE; int i = 0, j; info->desc = malloc(sizeof(struct mxs_dma_desc *) * @@ -1081,6 +1083,7 @@ int mxs_nand_init(struct mxs_nand_info *info) /* Reset the GPMI block. */ mxs_reset_block(&gpmi_regs->hw_gpmi_ctrl0_reg); + mxs_reset_block(&bch_regs->hw_bch_ctrl_reg); /* * Choose NAND mode, set IRQ polarity, disable write protection and diff --git a/drivers/mtd/nand/omap_gpmc.c b/drivers/mtd/nand/omap_gpmc.c index f1469d1..cee394e 100644 --- a/drivers/mtd/nand/omap_gpmc.c +++ b/drivers/mtd/nand/omap_gpmc.c @@ -29,6 +29,9 @@ #include <linux/mtd/nand_ecc.h> #include <linux/compiler.h> #include <nand.h> +#ifdef CONFIG_AM33XX +#include <asm/arch/elm.h> +#endif static uint8_t cs; static __maybe_unused struct nand_ecclayout hw_nand_oob = @@ -234,6 +237,370 @@ static void __maybe_unused omap_enable_hwecc(struct mtd_info *mtd, int32_t mode) } } +/* + * BCH8 support (needs ELM and thus AM33xx-only) + */ +#ifdef CONFIG_AM33XX +struct nand_bch_priv { + uint8_t mode; + uint8_t type; + uint8_t nibbles; +}; + +/* bch types */ +#define ECC_BCH4 0 +#define ECC_BCH8 1 +#define ECC_BCH16 2 + +/* BCH nibbles for diff bch levels */ +#define NAND_ECC_HW_BCH ((uint8_t)(NAND_ECC_HW_OOB_FIRST) + 1) +#define ECC_BCH4_NIBBLES 13 +#define ECC_BCH8_NIBBLES 26 +#define ECC_BCH16_NIBBLES 52 + +static struct nand_ecclayout hw_bch8_nand_oob = GPMC_NAND_HW_BCH8_ECC_LAYOUT; + +static struct nand_bch_priv bch_priv = { + .mode = NAND_ECC_HW_BCH, + .type = ECC_BCH8, + .nibbles = ECC_BCH8_NIBBLES +}; + +/* + * omap_read_bch8_result - Read BCH result for BCH8 level + * + * @mtd: MTD device structure + * @big_endian: When set read register 3 first + * @ecc_code: Read syndrome from BCH result registers + */ +static void omap_read_bch8_result(struct mtd_info *mtd, uint8_t big_endian, + uint8_t *ecc_code) +{ + uint32_t *ptr; + int8_t i = 0, j; + + if (big_endian) { + ptr = &gpmc_cfg->bch_result_0_3[0].bch_result_x[3]; + ecc_code[i++] = readl(ptr) & 0xFF; + ptr--; + for (j = 0; j < 3; j++) { + ecc_code[i++] = (readl(ptr) >> 24) & 0xFF; + ecc_code[i++] = (readl(ptr) >> 16) & 0xFF; + ecc_code[i++] = (readl(ptr) >> 8) & 0xFF; + ecc_code[i++] = readl(ptr) & 0xFF; + ptr--; + } + } else { + ptr = &gpmc_cfg->bch_result_0_3[0].bch_result_x[0]; + for (j = 0; j < 3; j++) { + ecc_code[i++] = readl(ptr) & 0xFF; + ecc_code[i++] = (readl(ptr) >> 8) & 0xFF; + ecc_code[i++] = (readl(ptr) >> 16) & 0xFF; + ecc_code[i++] = (readl(ptr) >> 24) & 0xFF; + ptr++; + } + ecc_code[i++] = readl(ptr) & 0xFF; + ecc_code[i++] = 0; /* 14th byte is always zero */ + } +} + +/* + * omap_ecc_disable - Disable H/W ECC calculation + * + * @mtd: MTD device structure + * + */ +static void omap_ecc_disable(struct mtd_info *mtd) +{ + writel((readl(&gpmc_cfg->ecc_config) & ~0x1), + &gpmc_cfg->ecc_config); +} + +/* + * omap_rotate_ecc_bch - Rotate the syndrome bytes + * + * @mtd: MTD device structure + * @calc_ecc: ECC read from ECC registers + * @syndrome: Rotated syndrome will be retuned in this array + * + */ +static void omap_rotate_ecc_bch(struct mtd_info *mtd, uint8_t *calc_ecc, + uint8_t *syndrome) +{ + struct nand_chip *chip = mtd->priv; + struct nand_bch_priv *bch = chip->priv; + uint8_t n_bytes = 0; + int8_t i, j; + + switch (bch->type) { + case ECC_BCH4: + n_bytes = 8; + break; + + case ECC_BCH16: + n_bytes = 28; + break; + + case ECC_BCH8: + default: + n_bytes = 13; + break; + } + + for (i = 0, j = (n_bytes-1); i < n_bytes; i++, j--) + syndrome[i] = calc_ecc[j]; +} + +/* + * omap_calculate_ecc_bch - Read BCH ECC result + * + * @mtd: MTD structure + * @dat: unused + * @ecc_code: ecc_code buffer + */ +static int omap_calculate_ecc_bch(struct mtd_info *mtd, const uint8_t *dat, + uint8_t *ecc_code) +{ + struct nand_chip *chip = mtd->priv; + struct nand_bch_priv *bch = chip->priv; + uint8_t big_endian = 1; + int8_t ret = 0; + + if (bch->type == ECC_BCH8) + omap_read_bch8_result(mtd, big_endian, ecc_code); + else /* BCH4 and BCH16 currently not supported */ + ret = -1; + + /* + * Stop reading anymore ECC vals and clear old results + * enable will be called if more reads are required + */ + omap_ecc_disable(mtd); + + return ret; +} + +/* + * omap_fix_errors_bch - Correct bch error in the data + * + * @mtd: MTD device structure + * @data: Data read from flash + * @error_count:Number of errors in data + * @error_loc: Locations of errors in the data + * + */ +static void omap_fix_errors_bch(struct mtd_info *mtd, uint8_t *data, + uint32_t error_count, uint32_t *error_loc) +{ + struct nand_chip *chip = mtd->priv; + struct nand_bch_priv *bch = chip->priv; + uint8_t count = 0; + uint32_t error_byte_pos; + uint32_t error_bit_mask; + uint32_t last_bit = (bch->nibbles * 4) - 1; + + /* Flip all bits as specified by the error location array. */ + /* FOR( each found error location flip the bit ) */ + for (count = 0; count < error_count; count++) { + if (error_loc[count] > last_bit) { + /* Remove the ECC spare bits from correction. */ + error_loc[count] -= (last_bit + 1); + /* Offset bit in data region */ + error_byte_pos = ((512 * 8) - + (error_loc[count]) - 1) / 8; + /* Error Bit mask */ + error_bit_mask = 0x1 << (error_loc[count] % 8); + /* Toggle the error bit to make the correction. */ + data[error_byte_pos] ^= error_bit_mask; + } + } +} + +/* + * omap_correct_data_bch - Compares the ecc read from nand spare area + * with ECC registers values and corrects one bit error if it has occured + * + * @mtd: MTD device structure + * @dat: page data + * @read_ecc: ecc read from nand flash (ignored) + * @calc_ecc: ecc read from ECC registers + * + * @return 0 if data is OK or corrected, else returns -1 + */ +static int omap_correct_data_bch(struct mtd_info *mtd, uint8_t *dat, + uint8_t *read_ecc, uint8_t *calc_ecc) +{ + struct nand_chip *chip = mtd->priv; + struct nand_bch_priv *bch = chip->priv; + uint8_t syndrome[28]; + uint32_t error_count = 0; + uint32_t error_loc[8]; + uint32_t i, ecc_flag; + + ecc_flag = 0; + for (i = 0; i < chip->ecc.bytes; i++) + if (read_ecc[i] != 0xff) + ecc_flag = 1; + + if (!ecc_flag) + return 0; + + elm_reset(); + elm_config((enum bch_level)(bch->type)); + + /* + * while reading ECC result we read it in big endian. + * Hence while loading to ELM we have rotate to get the right endian. + */ + omap_rotate_ecc_bch(mtd, calc_ecc, syndrome); + + /* use elm module to check for errors */ + if (elm_check_error(syndrome, bch->nibbles, &error_count, + error_loc) != 0) { + printf("ECC: uncorrectable.\n"); + return -1; + } + + /* correct bch error */ + if (error_count > 0) + omap_fix_errors_bch(mtd, dat, error_count, error_loc); + + return 0; +} +/* + * omap_hwecc_init_bch - Initialize the BCH Hardware ECC for NAND flash in + * GPMC controller + * @mtd: MTD device structure + * @mode: Read/Write mode + */ +static void omap_hwecc_init_bch(struct nand_chip *chip, int32_t mode) +{ + uint32_t val, dev_width = (chip->options & NAND_BUSWIDTH_16) >> 1; + uint32_t unused_length = 0; + struct nand_bch_priv *bch = chip->priv; + + switch (bch->nibbles) { + case ECC_BCH4_NIBBLES: + unused_length = 3; + break; + case ECC_BCH8_NIBBLES: + unused_length = 2; + break; + case ECC_BCH16_NIBBLES: + unused_length = 0; + break; + } + + /* Clear the ecc result registers, select ecc reg as 1 */ + writel(ECCCLEAR | ECCRESULTREG1, &gpmc_cfg->ecc_control); + + switch (mode) { + case NAND_ECC_WRITE: + /* eccsize1 config */ + val = ((unused_length + bch->nibbles) << 22); + break; + + case NAND_ECC_READ: + default: + /* by default eccsize0 selected for ecc1resultsize */ + /* eccsize0 config */ + val = (bch->nibbles << 12); + /* eccsize1 config */ + val |= (unused_length << 22); + break; + } + /* ecc size configuration */ + writel(val, &gpmc_cfg->ecc_size_config); + /* by default 512bytes sector page is selected */ + /* set bch mode */ + val = (1 << 16); + /* bch4 / bch8 / bch16 */ + val |= (bch->type << 12); + /* set wrap mode to 1 */ + val |= (1 << 8); + val |= (dev_width << 7); + val |= (cs << 1); + writel(val, &gpmc_cfg->ecc_config); +} + +/* + * omap_enable_ecc_bch- This function enables the bch h/w ecc functionality + * @mtd: MTD device structure + * @mode: Read/Write mode + * + */ +static void omap_enable_ecc_bch(struct mtd_info *mtd, int32_t mode) +{ + struct nand_chip *chip = mtd->priv; + + omap_hwecc_init_bch(chip, mode); + /* enable ecc */ + writel((readl(&gpmc_cfg->ecc_config) | 0x1), &gpmc_cfg->ecc_config); +} + +/** + * omap_read_page_bch - hardware ecc based page read function + * @mtd: mtd info structure + * @chip: nand chip info structure + * @buf: buffer to store read data + * @page: page number to read + * + */ +static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int page) +{ + int i, eccsize = chip->ecc.size; + int eccbytes = chip->ecc.bytes; + int eccsteps = chip->ecc.steps; + uint8_t *p = buf; + uint8_t *ecc_calc = chip->buffers->ecccalc; + uint8_t *ecc_code = chip->buffers->ecccode; + uint32_t *eccpos = chip->ecc.layout->eccpos; + uint8_t *oob = chip->oob_poi; + uint32_t data_pos; + uint32_t oob_pos; + + data_pos = 0; + /* oob area start */ + oob_pos = (eccsize * eccsteps) + chip->ecc.layout->eccpos[0]; + oob += chip->ecc.layout->eccpos[0]; + + for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize, + oob += eccbytes) { + chip->ecc.hwctl(mtd, NAND_ECC_READ); + /* read data */ + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_pos, page); + chip->read_buf(mtd, p, eccsize); + + /* read respective ecc from oob area */ + chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, page); + chip->read_buf(mtd, oob, eccbytes); + /* read syndrome */ + chip->ecc.calculate(mtd, p, &ecc_calc[i]); + + data_pos += eccsize; + oob_pos += eccbytes; + } + + for (i = 0; i < chip->ecc.total; i++) + ecc_code[i] = chip->oob_poi[eccpos[i]]; + + eccsteps = chip->ecc.steps; + p = buf; + + for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { + int stat; + + stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]); + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + } + return 0; +} +#endif /* CONFIG_AM33XX */ + #ifndef CONFIG_SPL_BUILD /* * omap_nand_switch_ecc - switch the ECC operation b/w h/w ecc and s/w ecc. @@ -269,7 +636,7 @@ void omap_nand_switch_ecc(int32_t hardware) nand->ecc.calculate = NULL; /* Setup the ecc configurations again */ - if (hardware) { + if (hardware == 1) { nand->ecc.mode = NAND_ECC_HW; nand->ecc.layout = &hw_nand_oob; nand->ecc.size = 512; @@ -279,6 +646,19 @@ void omap_nand_switch_ecc(int32_t hardware) nand->ecc.calculate = omap_calculate_ecc; omap_hwecc_init(nand); printf("HW ECC selected\n"); +#ifdef CONFIG_AM33XX + } else if (hardware == 2) { + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.layout = &hw_bch8_nand_oob; + nand->ecc.size = 512; + nand->ecc.bytes = 14; + nand->ecc.read_page = omap_read_page_bch; + nand->ecc.hwctl = omap_enable_ecc_bch; + nand->ecc.correct = omap_correct_data_bch; + nand->ecc.calculate = omap_calculate_ecc_bch; + omap_hwecc_init_bch(nand, NAND_ECC_READ); + printf("HW BCH8 selected\n"); +#endif } else { nand->ecc.mode = NAND_ECC_SOFT; /* Use mtd default settings */ @@ -350,7 +730,27 @@ int board_nand_init(struct nand_chip *nand) nand->options |= NAND_BUSWIDTH_16; nand->chip_delay = 100; + +#ifdef CONFIG_AM33XX + /* required in case of BCH */ + elm_init(); + + /* BCH info that will be correct for SPL or overridden otherwise. */ + nand->priv = &bch_priv; +#endif + /* Default ECC mode */ +#ifdef CONFIG_AM33XX + nand->ecc.mode = NAND_ECC_HW; + nand->ecc.layout = &hw_bch8_nand_oob; + nand->ecc.size = CONFIG_SYS_NAND_ECCSIZE; + nand->ecc.bytes = CONFIG_SYS_NAND_ECCBYTES; + nand->ecc.hwctl = omap_enable_ecc_bch; + nand->ecc.correct = omap_correct_data_bch; + nand->ecc.calculate = omap_calculate_ecc_bch; + nand->ecc.read_page = omap_read_page_bch; + omap_hwecc_init_bch(nand, NAND_ECC_READ); +#else #if !defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_NAND_SOFTECC) nand->ecc.mode = NAND_ECC_SOFT; #else @@ -363,6 +763,7 @@ int board_nand_init(struct nand_chip *nand) nand->ecc.calculate = omap_calculate_ecc; omap_hwecc_init(nand); #endif +#endif #ifdef CONFIG_SPL_BUILD if (nand->options & NAND_BUSWIDTH_16) diff --git a/drivers/net/cpsw.c b/drivers/net/cpsw.c index af3d859..db04795 100644 --- a/drivers/net/cpsw.c +++ b/drivers/net/cpsw.c @@ -920,7 +920,10 @@ static int cpsw_phy_init(struct eth_device *dev, struct cpsw_slave *slave) SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Full); - phydev = phy_connect(priv->bus, 0, dev, slave->data->phy_if); + phydev = phy_connect(priv->bus, + CONFIG_PHY_ADDR, + dev, + slave->data->phy_if); phydev->supported &= supported; phydev->advertising = phydev->supported; diff --git a/drivers/net/e1000.c b/drivers/net/e1000.c index 2d4da4b..8ba98b2 100644 --- a/drivers/net/e1000.c +++ b/drivers/net/e1000.c @@ -1688,6 +1688,16 @@ e1000_init_hw(struct eth_device *nic) E1000_WRITE_REG(hw, TXDCTL, ctrl); } + /* Set the receive descriptor write back policy */ + + if (hw->mac_type >= e1000_82571) { + ctrl = E1000_READ_REG(hw, RXDCTL); + ctrl = + (ctrl & ~E1000_RXDCTL_WTHRESH) | + E1000_RXDCTL_FULL_RX_DESC_WB; + E1000_WRITE_REG(hw, RXDCTL, ctrl); + } + switch (hw->mac_type) { default: break; diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index fd1d8f8..1bbae50 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -1551,6 +1551,7 @@ struct e1000_hw { #define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */ #define E1000_RXDCTL_WTHRESH 0x003F0000 /* RXDCTL Writeback Threshold */ #define E1000_RXDCTL_GRAN 0x01000000 /* RXDCTL Granularity */ +#define E1000_RXDCTL_FULL_RX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ /* Transmit Descriptor Control */ #define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index e51e799..4b27198 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -425,6 +425,16 @@ static struct phy_driver M88E1118_driver = { .shutdown = &genphy_shutdown, }; +static struct phy_driver M88E1118R_driver = { + .name = "Marvell 88E1118R", + .uid = 0x1410e40, + .mask = 0xffffff0, + .features = PHY_GBIT_FEATURES, + .config = &m88e1118_config, + .startup = &m88e1118_startup, + .shutdown = &genphy_shutdown, +}; + static struct phy_driver M88E1121R_driver = { .name = "Marvell 88E1121R", .uid = 0x1410cb0, @@ -461,6 +471,7 @@ int phy_marvell_init(void) phy_register(&M88E1145_driver); phy_register(&M88E1121R_driver); phy_register(&M88E1118_driver); + phy_register(&M88E1118R_driver); phy_register(&M88E1111S_driver); phy_register(&M88E1011S_driver); diff --git a/drivers/net/sh_eth.c b/drivers/net/sh_eth.c index 2d9cc32..e6fc8c8 100644 --- a/drivers/net/sh_eth.c +++ b/drivers/net/sh_eth.c @@ -417,7 +417,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) printf(SHETHER_NAME ": 100Base/"); #if defined(SH_ETH_TYPE_GETHER) sh_eth_write(eth, GECMR_100B, GECMR); -#elif defined(CONFIG_CPU_SH7757) +#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752) sh_eth_write(eth, 1, RTRATE); #elif defined(CONFIG_CPU_SH7724) val = ECMR_RTM; @@ -426,7 +426,7 @@ static int sh_eth_config(struct sh_eth_dev *eth, bd_t *bd) printf(SHETHER_NAME ": 10Base/"); #if defined(SH_ETH_TYPE_GETHER) sh_eth_write(eth, GECMR_10B, GECMR); -#elif defined(CONFIG_CPU_SH7757) +#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752) sh_eth_write(eth, 0, RTRATE); #endif } diff --git a/drivers/net/sh_eth.h b/drivers/net/sh_eth.h index 61d2df9..568fafe 100644 --- a/drivers/net/sh_eth.h +++ b/drivers/net/sh_eth.h @@ -288,7 +288,7 @@ static const u16 sh_eth_offset_fast_sh4[SH_ETH_MAX_REGISTER_OFFSET] = { #if defined(CONFIG_CPU_SH7763) || defined(CONFIG_CPU_SH7734) #define SH_ETH_TYPE_GETHER #define BASE_IO_ADDR 0xfee00000 -#elif defined(CONFIG_CPU_SH7757) +#elif defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752) #if defined(CONFIG_SH_ETHER_USE_GETHER) #define SH_ETH_TYPE_GETHER #define BASE_IO_ADDR 0xfee00000 @@ -346,7 +346,7 @@ enum DMAC_T_BIT { /* GECMR */ enum GECMR_BIT { -#if defined(CONFIG_CPU_SH7757) +#if defined(CONFIG_CPU_SH7757) || defined(CONFIG_CPU_SH7752) GECMR_1000B = 0x20, GECMR_100B = 0x01, GECMR_10B = 0x00, #else GECMR_1000B = 0x01, GECMR_100B = 0x04, GECMR_10B = 0x00, diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile index e19a9a8..14d426f 100644 --- a/drivers/power/pmic/Makefile +++ b/drivers/power/pmic/Makefile @@ -28,6 +28,7 @@ LIB := $(obj)libpmic.o COBJS-$(CONFIG_POWER_MAX8998) += pmic_max8998.o COBJS-$(CONFIG_POWER_MAX8997) += pmic_max8997.o COBJS-$(CONFIG_POWER_MUIC_MAX8997) += muic_max8997.o +COBJS-$(CONFIG_POWER_MAX77686) += pmic_max77686.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/drivers/power/pmic/pmic_max77686.c b/drivers/power/pmic/pmic_max77686.c new file mode 100644 index 0000000..fce0183 --- /dev/null +++ b/drivers/power/pmic/pmic_max77686.c @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <power/pmic.h> +#include <power/max77686_pmic.h> +#include <errno.h> + +int pmic_init(unsigned char bus) +{ + static const char name[] = "MAX77686_PMIC"; + struct pmic *p = pmic_alloc(); + + if (!p) { + printf("%s: POWER allocation error!\n", __func__); + return -ENOMEM; + } + + puts("Board PMIC init\n"); + p->name = name; + p->interface = PMIC_I2C; + p->number_of_regs = PMIC_NUM_OF_REGS; + p->hw.i2c.addr = MAX77686_I2C_ADDR; + p->hw.i2c.tx_num = 1; + p->bus = bus; + + return 0; +} diff --git a/drivers/power/twl6035.c b/drivers/power/twl6035.c index 624c09e..d3de698 100644 --- a/drivers/power/twl6035.c +++ b/drivers/power/twl6035.c @@ -50,16 +50,25 @@ void twl6035_init_settings(void) return; } -void twl6035_mmc1_poweron_ldo(void) +int twl6035_mmc1_poweron_ldo(void) { u8 val = 0; /* set LDO9 TWL6035 to 3V */ val = 0x2b; /* (3 -.9)*28 +1 */ - palmas_write_u8(0x48, LDO9_VOLTAGE, val); + + if (palmas_write_u8(0x48, LDO9_VOLTAGE, val)) { + printf("twl6035: could not set LDO9 voltage.\n"); + return 1; + } /* TURN ON LDO9 */ val = LDO_ON | LDO_MODE_SLEEP | LDO_MODE_ACTIVE; - palmas_write_u8(0x48, LDO9_CTRL, val); - return; + + if (palmas_write_u8(0x48, LDO9_CTRL, val)) { + printf("twl6035: could not turn on LDO9.\n"); + return 1; + } + + return 0; } diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c index f53c2bf..b590992 100644 --- a/drivers/serial/s3c64xx.c +++ b/drivers/serial/s3c64xx.c @@ -22,7 +22,8 @@ */ #include <common.h> - +#include <linux/compiler.h> +#include <serial.h> #include <asm/arch/s3c6400.h> DECLARE_GLOBAL_DATA_PTR; diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index f5f43a6..1f8955a 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -22,6 +22,7 @@ */ #include <common.h> +#include <environment.h> #include <serial.h> #include <stdio_dev.h> #include <post.h> @@ -32,6 +33,11 @@ DECLARE_GLOBAL_DATA_PTR; static struct serial_device *serial_devices; static struct serial_device *serial_current; +/* + * Table with supported baudrates (defined in config_xyz.h) + */ +static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE; +#define N_BAUDRATES (sizeof(baudrate_table) / sizeof(baudrate_table[0])) /** * serial_null() - Void registration routine of a serial driver @@ -46,6 +52,70 @@ static void serial_null(void) } /** + * on_baudrate() - Update the actual baudrate when the env var changes + * + * This will check for a valid baudrate and only apply it if valid. + */ +static int on_baudrate(const char *name, const char *value, enum env_op op, + int flags) +{ + int i; + int baudrate; + + switch (op) { + case env_op_create: + case env_op_overwrite: + /* + * Switch to new baudrate if new baudrate is supported + */ + baudrate = simple_strtoul(value, NULL, 10); + + /* Not actually changing */ + if (gd->baudrate == baudrate) + return 0; + + for (i = 0; i < N_BAUDRATES; ++i) { + if (baudrate == baudrate_table[i]) + break; + } + if (i == N_BAUDRATES) { + if ((flags & H_FORCE) == 0) + printf("## Baudrate %d bps not supported\n", + baudrate); + return 1; + } + if ((flags & H_INTERACTIVE) != 0) { + printf("## Switch baudrate to %d" + " bps and press ENTER ...\n", baudrate); + udelay(50000); + } + + gd->baudrate = baudrate; +#if defined(CONFIG_PPC) || defined(CONFIG_MCF52x2) + gd->bd->bi_baudrate = baudrate; +#endif + + serial_setbrg(); + + udelay(50000); + + if ((flags & H_INTERACTIVE) != 0) + while (1) { + if (getc() == '\r') + break; + } + + return 0; + case env_op_delete: + printf("## Baudrate may not be deleted\n"); + return 1; + default: + return 0; + } +} +U_BOOT_ENV_CALLBACK(baudrate, on_baudrate); + +/** * serial_initfunc() - Forward declare of driver registration routine * @name: Name of the real driver registration routine. * diff --git a/drivers/sound/Makefile b/drivers/sound/Makefile new file mode 100644 index 0000000..8fdffb1 --- /dev/null +++ b/drivers/sound/Makefile @@ -0,0 +1,48 @@ +# +# Copyright (C) 2012 Samsung Electronics +# R. Chandrasekar <rcsekar@samsung.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB := $(obj)libsound.o + +COBJS-$(CONFIG_SOUND) += sound.o +COBJS-$(CONFIG_I2S) += samsung-i2s.o +COBJS-$(CONFIG_SOUND_WM8994) += wm8994.o + +COBJS := $(COBJS-y) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +all: $(LIB) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +# diff --git a/drivers/sound/samsung-i2s.c b/drivers/sound/samsung-i2s.c new file mode 100644 index 0000000..9f3117d --- /dev/null +++ b/drivers/sound/samsung-i2s.c @@ -0,0 +1,358 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar <rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <asm/arch/clk.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/i2s-regs.h> +#include <asm/io.h> +#include <common.h> +#include <sound.h> +#include <i2s.h> + +#define FIC_TX2COUNT(x) (((x) >> 24) & 0xf) +#define FIC_TX1COUNT(x) (((x) >> 16) & 0xf) +#define FIC_TXCOUNT(x) (((x) >> 8) & 0xf) +#define FIC_RXCOUNT(x) (((x) >> 0) & 0xf) +#define FICS_TXCOUNT(x) (((x) >> 8) & 0x7f) + +#define TIMEOUT_I2S_TX 100 /* i2s transfer timeout */ + +/* + * Sets the frame size for I2S LR clock + * + * @param i2s_reg i2s regiter address + * @param rfs Frame Size + */ +static void i2s_set_lr_framesize(struct i2s_reg *i2s_reg, unsigned int rfs) +{ + unsigned int mod = readl(&i2s_reg->mod); + + mod &= ~MOD_RCLK_MASK; + + switch (rfs) { + case 768: + mod |= MOD_RCLK_768FS; + break; + case 512: + mod |= MOD_RCLK_512FS; + break; + case 384: + mod |= MOD_RCLK_384FS; + break; + default: + mod |= MOD_RCLK_256FS; + break; + } + + writel(mod, &i2s_reg->mod); +} + +/* + * Sets the i2s transfer control + * + * @param i2s_reg i2s regiter address + * @param on 1 enable tx , 0 disable tx transfer + */ +static void i2s_txctrl(struct i2s_reg *i2s_reg, int on) +{ + unsigned int con = readl(&i2s_reg->con); + unsigned int mod = readl(&i2s_reg->mod) & ~MOD_MASK; + + if (on) { + con |= CON_ACTIVE; + con &= ~CON_TXCH_PAUSE; + + } else { + + con |= CON_TXCH_PAUSE; + con &= ~CON_ACTIVE; + } + + writel(mod, &i2s_reg->mod); + writel(con, &i2s_reg->con); +} + +/* + * set the bit clock frame size (in multiples of LRCLK) + * + * @param i2s_reg i2s regiter address + * @param bfs bit Frame Size + */ +static void i2s_set_bitclk_framesize(struct i2s_reg *i2s_reg, unsigned bfs) +{ + unsigned int mod = readl(&i2s_reg->mod); + + mod &= ~MOD_BCLK_MASK; + + switch (bfs) { + case 48: + mod |= MOD_BCLK_48FS; + break; + case 32: + mod |= MOD_BCLK_32FS; + break; + case 24: + mod |= MOD_BCLK_24FS; + break; + case 16: + mod |= MOD_BCLK_16FS; + break; + default: + return; + } + writel(mod, &i2s_reg->mod); +} + +/* + * flushes the i2stx fifo + * + * @param i2s_reg i2s regiter address + * @param flush Tx fifo flush command (0x00 - do not flush + * 0x80 - flush tx fifo) + */ +void i2s_fifo(struct i2s_reg *i2s_reg, unsigned int flush) +{ + /* Flush the FIFO */ + setbits_le32(&i2s_reg->fic, flush); + clrbits_le32(&i2s_reg->fic, flush); +} + +/* + * Set System Clock direction + * + * @param i2s_reg i2s regiter address + * @param dir Clock direction + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_set_sysclk_dir(struct i2s_reg *i2s_reg, int dir) +{ + unsigned int mod = readl(&i2s_reg->mod); + + if (dir == SND_SOC_CLOCK_IN) + mod |= MOD_CDCLKCON; + else + mod &= ~MOD_CDCLKCON; + + writel(mod, &i2s_reg->mod); + + return 0; +} + +/* + * Sets I2S Clcok format + * + * @param fmt i2s clock properties + * @param i2s_reg i2s regiter address + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_set_fmt(struct i2s_reg *i2s_reg, unsigned int fmt) +{ + unsigned int mod = readl(&i2s_reg->mod); + unsigned int tmp = 0; + unsigned int ret = 0; + + /* Format is priority */ + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_RIGHT_J: + tmp |= MOD_LR_RLOW; + tmp |= MOD_SDF_MSB; + break; + case SND_SOC_DAIFMT_LEFT_J: + tmp |= MOD_LR_RLOW; + tmp |= MOD_SDF_LSB; + break; + case SND_SOC_DAIFMT_I2S: + tmp |= MOD_SDF_IIS; + break; + default: + debug("%s: Invalid format priority [0x%x]\n", __func__, + (fmt & SND_SOC_DAIFMT_FORMAT_MASK)); + return -1; + } + + /* + * INV flag is relative to the FORMAT flag - if set it simply + * flips the polarity specified by the Standard + */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_NB_IF: + if (tmp & MOD_LR_RLOW) + tmp &= ~MOD_LR_RLOW; + else + tmp |= MOD_LR_RLOW; + break; + default: + debug("%s: Invalid clock ploarity input [0x%x]\n", __func__, + (fmt & SND_SOC_DAIFMT_INV_MASK)); + return -1; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + tmp |= MOD_SLAVE; + break; + case SND_SOC_DAIFMT_CBM_CFM: + /* Set default source clock in Master mode */ + ret = i2s_set_sysclk_dir(i2s_reg, SND_SOC_CLOCK_OUT); + if (ret != 0) { + debug("%s:set i2s clock direction failed\n", __func__); + return -1; + } + break; + default: + debug("%s: Invalid master selection [0x%x]\n", __func__, + (fmt & SND_SOC_DAIFMT_MASTER_MASK)); + return -1; + } + + mod &= ~(MOD_SDF_MASK | MOD_LR_RLOW | MOD_SLAVE); + mod |= tmp; + writel(mod, &i2s_reg->mod); + + return 0; +} + +/* + * Sets the sample width in bits + * + * @param blc samplewidth (size of sample in bits) + * @param i2s_reg i2s regiter address + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_set_samplesize(struct i2s_reg *i2s_reg, unsigned int blc) +{ + unsigned int mod = readl(&i2s_reg->mod); + + mod &= ~MOD_BLCP_MASK; + mod &= ~MOD_BLC_MASK; + + switch (blc) { + case 8: + mod |= MOD_BLCP_8BIT; + mod |= MOD_BLC_8BIT; + break; + case 16: + mod |= MOD_BLCP_16BIT; + mod |= MOD_BLC_16BIT; + break; + case 24: + mod |= MOD_BLCP_24BIT; + mod |= MOD_BLC_24BIT; + break; + default: + debug("%s: Invalid sample size input [0x%x]\n", + __func__, blc); + return -1; + } + writel(mod, &i2s_reg->mod); + + return 0; +} + +int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned int *data, + unsigned long data_size) +{ + int i; + int start; + struct i2s_reg *i2s_reg = + (struct i2s_reg *)pi2s_tx->base_address; + + if (data_size < FIFO_LENGTH) { + debug("%s : Invalid data size\n", __func__); + return -1; /* invalid pcm data size */ + } + + /* fill the tx buffer before stating the tx transmit */ + for (i = 0; i < FIFO_LENGTH; i++) + writel(*data++, &i2s_reg->txd); + + data_size -= FIFO_LENGTH; + i2s_txctrl(i2s_reg, I2S_TX_ON); + + while (data_size > 0) { + start = get_timer(0); + if (!(CON_TXFIFO_FULL & (readl(&i2s_reg->con)))) { + writel(*data++, &i2s_reg->txd); + data_size--; + } else { + if (get_timer(start) > TIMEOUT_I2S_TX) { + i2s_txctrl(i2s_reg, I2S_TX_OFF); + debug("%s: I2S Transfer Timeout\n", __func__); + return -1; + } + } + } + i2s_txctrl(i2s_reg, I2S_TX_OFF); + + return 0; +} + +int i2s_tx_init(struct i2stx_info *pi2s_tx) +{ + int ret; + struct i2s_reg *i2s_reg = + (struct i2s_reg *)pi2s_tx->base_address; + + /* Initialize GPIO for I2s */ + exynos_pinmux_config(PERIPH_ID_I2S1, 0); + + /* Set EPLL Clock */ + ret = set_epll_clk(pi2s_tx->audio_pll_clk); + if (ret != 0) { + debug("%s: epll clock set rate falied\n", __func__); + return -1; + } + + /* Select Clk Source for Audio1 */ + set_i2s_clk_source(); + + /* Set Prescaler to get MCLK */ + set_i2s_clk_prescaler(pi2s_tx->audio_pll_clk, + (pi2s_tx->samplingrate * (pi2s_tx->rfs))); + + /* Configure I2s format */ + ret = i2s_set_fmt(i2s_reg, (SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM)); + if (ret == 0) { + i2s_set_lr_framesize(i2s_reg, pi2s_tx->rfs); + ret = i2s_set_samplesize(i2s_reg, pi2s_tx->bitspersample); + if (ret != 0) { + debug("%s:set sample rate failed\n", __func__); + return -1; + } + + i2s_set_bitclk_framesize(i2s_reg, pi2s_tx->bfs); + /* disable i2s transfer flag and flush the fifo */ + i2s_txctrl(i2s_reg, I2S_TX_OFF); + i2s_fifo(i2s_reg, FIC_TXFLUSH); + } else { + debug("%s: failed\n", __func__); + } + + return ret; +} diff --git a/drivers/sound/sound.c b/drivers/sound/sound.c new file mode 100644 index 0000000..4c74534 --- /dev/null +++ b/drivers/sound/sound.c @@ -0,0 +1,228 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar <rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <malloc.h> +#include <common.h> +#include <asm/io.h> +#include <i2c.h> +#include <i2s.h> +#include <sound.h> +#include "wm8994.h" +#include <asm/arch/sound.h> + +/* defines */ +#define SOUND_400_HZ 400 +#define SOUND_BITS_IN_BYTE 8 + +static struct i2stx_info g_i2stx_pri; +static struct sound_codec_info g_codec_info; + +/* + * get_sound_fdt_values gets fdt values for i2s parameters + * + * @param i2stx_info i2s transmitter transfer param structure + * @param blob FDT blob + */ +static void get_sound_i2s_values(struct i2stx_info *i2s) +{ + i2s->base_address = samsung_get_base_i2s(); + i2s->audio_pll_clk = I2S_PLL_CLK; + i2s->samplingrate = I2S_SAMPLING_RATE; + i2s->bitspersample = I2S_BITS_PER_SAMPLE; + i2s->channels = I2S_CHANNELS; + i2s->rfs = I2S_RFS; + i2s->bfs = I2S_BFS; +} + +/* + * Gets fdt values for wm8994 config parameters + * + * @param pcodec_info codec information structure + * @param blob FDT blob + * @return int value, 0 for success + */ +static int get_sound_wm8994_values(struct sound_codec_info *pcodec_info) +{ + int error = 0; + + switch (AUDIO_COMPAT) { + case AUDIO_COMPAT_SPI: + debug("%s: Support not added for SPI interface\n", __func__); + return -1; + break; + case AUDIO_COMPAT_I2C: + pcodec_info->i2c_bus = AUDIO_I2C_BUS; + pcodec_info->i2c_dev_addr = AUDIO_I2C_REG; + debug("i2c dev addr = %d\n", pcodec_info->i2c_dev_addr); + break; + default: + debug("%s: Unknown compat id %d\n", __func__, AUDIO_COMPAT); + return -1; + } + + if (error == -1) { + debug("fail to get wm8994 codec node properties\n"); + return -1; + } + + return 0; +} + +/* + * Gets fdt values for codec config parameters + * + * @param pcodec_info codec information structure + * @param blob FDT blob + * @return int value, 0 for success + */ +static int get_sound_codec_values(struct sound_codec_info *pcodec_info) +{ + int error = 0; + const char *codectype; + + codectype = AUDIO_CODEC; + + if (!strcmp(codectype, "wm8994")) { + pcodec_info->codec_type = CODEC_WM_8994; + error = get_sound_wm8994_values(pcodec_info); + } else { + error = -1; + } + + if (error == -1) { + debug("fail to get sound codec node properties\n"); + return -1; + } + + return 0; +} + +int sound_init(void) +{ + int ret; + struct i2stx_info *pi2s_tx = &g_i2stx_pri; + struct sound_codec_info *pcodec_info = &g_codec_info; + + /* Get the I2S Values */ + get_sound_i2s_values(pi2s_tx); + + /* Get the codec Values */ + if (get_sound_codec_values(pcodec_info) < 0) + return -1; + + ret = i2s_tx_init(pi2s_tx); + if (ret) { + debug("%s: Failed to init i2c transmit: ret=%d\n", __func__, + ret); + return ret; + } + + /* Check the codec type and initialise the same */ + if (pcodec_info->codec_type == CODEC_WM_8994) { + ret = wm8994_init(pcodec_info, WM8994_AIF2, + pi2s_tx->samplingrate, + (pi2s_tx->samplingrate * (pi2s_tx->rfs)), + pi2s_tx->bitspersample, pi2s_tx->channels); + } else { + debug("%s: Unknown code type %d\n", __func__, + pcodec_info->codec_type); + return -1; + } + if (ret) { + debug("%s: Codec init failed\n", __func__); + return -1; + } + + return ret; +} + +/* + * Generates square wave sound data for 1 second + * + * @param data data buffer pointer + * @param size size of the buffer + * @param freq frequency of the wave + */ +static void sound_prepare_buffer(unsigned short *data, int size, uint32_t freq) +{ + const int sample = 48000; + const unsigned short amplitude = 16000; /* between 1 and 32767 */ + const int period = freq ? sample / freq : 0; + const int half = period / 2; + + assert(freq); + + /* Make sure we don't overflow our buffer */ + if (size % 2) + size--; + + while (size) { + int i; + for (i = 0; size && i < half; i++) { + size -= 2; + *data++ = amplitude; + *data++ = amplitude; + } + for (i = 0; size && i < period - half; i++) { + size -= 2; + *data++ = -amplitude; + *data++ = -amplitude; + } + } +} + +int sound_play(uint32_t msec, uint32_t frequency) +{ + unsigned int *data; + unsigned long data_size; + unsigned int ret = 0; + + /*Buffer length computation */ + data_size = g_i2stx_pri.samplingrate * g_i2stx_pri.channels; + data_size *= (g_i2stx_pri.bitspersample / SOUND_BITS_IN_BYTE); + data = malloc(data_size); + + if (data == NULL) { + debug("%s: malloc failed\n", __func__); + return -1; + } + + sound_prepare_buffer((unsigned short *)data, + data_size / sizeof(unsigned short), frequency); + + while (msec >= 1000) { + ret = i2s_transfer_tx_data(&g_i2stx_pri, data, + (data_size / sizeof(int))); + msec -= 1000; + } + if (msec) { + unsigned long size = + (data_size * msec) / (sizeof(int) * 1000); + + ret = i2s_transfer_tx_data(&g_i2stx_pri, data, size); + } + + free(data); + + return ret; +} diff --git a/drivers/sound/wm8994.c b/drivers/sound/wm8994.c new file mode 100644 index 0000000..293903a --- /dev/null +++ b/drivers/sound/wm8994.c @@ -0,0 +1,792 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar <rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <asm/arch/clk.h> +#include <asm/arch/cpu.h> +#include <asm/gpio.h> +#include <asm/io.h> +#include <common.h> +#include <div64.h> +#include <i2c.h> +#include <i2s.h> +#include <sound.h> +#include "wm8994.h" +#include "wm8994_registers.h" + +/* defines for wm8994 system clock selection */ +#define SEL_MCLK1 0x00 +#define SEL_MCLK2 0x08 +#define SEL_FLL1 0x10 +#define SEL_FLL2 0x18 + +/* fll config to configure fll */ +struct wm8994_fll_config { + int src; /* Source */ + int in; /* Input frequency in Hz */ + int out; /* output frequency in Hz */ +}; + +/* codec private data */ +struct wm8994_priv { + enum wm8994_type type; /* codec type of wolfson */ + int revision; /* Revision */ + int sysclk[WM8994_MAX_AIF]; /* System clock frequency in Hz */ + int mclk[WM8994_MAX_AIF]; /* master clock frequency in Hz */ + int aifclk[WM8994_MAX_AIF]; /* audio interface clock in Hz */ + struct wm8994_fll_config fll[2]; /* fll config to configure fll */ +}; + +/* wm 8994 supported sampling rate values */ +static unsigned int src_rate[] = { + 8000, 11025, 12000, 16000, 22050, 24000, + 32000, 44100, 48000, 88200, 96000 +}; + +/* op clock divisions */ +static int opclk_divs[] = { 10, 20, 30, 40, 55, 60, 80, 120, 160 }; + +/* lr clock frame size ratio */ +static int fs_ratios[] = { + 64, 128, 192, 256, 348, 512, 768, 1024, 1408, 1536 +}; + +/* bit clock divisors */ +static int bclk_divs[] = { + 10, 15, 20, 30, 40, 50, 60, 80, 110, 120, 160, 220, 240, 320, 440, 480, + 640, 880, 960, 1280, 1760, 1920 +}; + +static struct wm8994_priv g_wm8994_info; +static unsigned char g_wm8994_i2c_dev_addr; + +/* + * Initialise I2C for wm 8994 + * + * @param bus no i2c bus number in which wm8994 is connected + */ +static void wm8994_i2c_init(int bus_no) +{ + i2c_set_bus_num(bus_no); +} + +/* + * Writes value to a device register through i2c + * + * @param reg reg number to be write + * @param data data to be writen to the above registor + * + * @return int value 1 for change, 0 for no change or negative error code. + */ +static int wm8994_i2c_write(unsigned int reg, unsigned short data) +{ + unsigned char val[2]; + + val[0] = (unsigned char)((data >> 8) & 0xff); + val[1] = (unsigned char)(data & 0xff); + debug("Write Addr : 0x%04X, Data : 0x%04X\n", reg, data); + + return i2c_write(g_wm8994_i2c_dev_addr, reg, 2, val, 2); +} + +/* + * Read a value from a device register through i2c + * + * @param reg reg number to be read + * @param data address of read data to be stored + * + * @return int value 0 for success, -1 in case of error. + */ +static unsigned int wm8994_i2c_read(unsigned int reg , unsigned short *data) +{ + unsigned char val[2]; + int ret; + + ret = i2c_read(g_wm8994_i2c_dev_addr, reg, 2, val, 2); + if (ret != 0) { + debug("%s: Error while reading register %#04x\n", + __func__, reg); + return -1; + } + + *data = val[0]; + *data <<= 8; + *data |= val[1]; + + return 0; +} + +/* + * update device register bits through i2c + * + * @param reg codec register + * @param mask register mask + * @param value new value + * + * @return int value 1 if change in the register value, + * 0 for no change or negative error code. + */ +static int wm8994_update_bits(unsigned int reg, unsigned short mask, + unsigned short value) +{ + int change , ret = 0; + unsigned short old, new; + + if (wm8994_i2c_read(reg, &old) != 0) + return -1; + new = (old & ~mask) | (value & mask); + change = (old != new) ? 1 : 0; + if (change) + ret = wm8994_i2c_write(reg, new); + if (ret < 0) + return ret; + + return change; +} + +/* + * Sets i2s set format + * + * @param aif_id Interface ID + * @param fmt i2S format + * + * @return -1 for error and 0 Success. + */ +int wm8994_set_fmt(int aif_id, unsigned int fmt) +{ + int ms_reg; + int aif_reg; + int ms = 0; + int aif = 0; + int aif_clk = 0; + int error = 0; + + switch (aif_id) { + case 1: + ms_reg = WM8994_AIF1_MASTER_SLAVE; + aif_reg = WM8994_AIF1_CONTROL_1; + aif_clk = WM8994_AIF1_CLOCKING_1; + break; + case 2: + ms_reg = WM8994_AIF2_MASTER_SLAVE; + aif_reg = WM8994_AIF2_CONTROL_1; + aif_clk = WM8994_AIF2_CLOCKING_1; + break; + default: + debug("%s: Invalid audio interface selection\n", __func__); + return -1; + } + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBS_CFS: + break; + case SND_SOC_DAIFMT_CBM_CFM: + ms = WM8994_AIF1_MSTR; + break; + default: + debug("%s: Invalid i2s master selection\n", __func__); + return -1; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_B: + aif |= WM8994_AIF1_LRCLK_INV; + case SND_SOC_DAIFMT_DSP_A: + aif |= 0x18; + break; + case SND_SOC_DAIFMT_I2S: + aif |= 0x10; + break; + case SND_SOC_DAIFMT_RIGHT_J: + break; + case SND_SOC_DAIFMT_LEFT_J: + aif |= 0x8; + break; + default: + debug("%s: Invalid i2s format selection\n", __func__); + return -1; + } + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_DSP_A: + case SND_SOC_DAIFMT_DSP_B: + /* frame inversion not valid for DSP modes */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + aif |= WM8994_AIF1_BCLK_INV; + break; + default: + debug("%s: Invalid i2s frame inverse selection\n", + __func__); + return -1; + } + break; + + case SND_SOC_DAIFMT_I2S: + case SND_SOC_DAIFMT_RIGHT_J: + case SND_SOC_DAIFMT_LEFT_J: + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_IF: + aif |= WM8994_AIF1_BCLK_INV | WM8994_AIF1_LRCLK_INV; + break; + case SND_SOC_DAIFMT_IB_NF: + aif |= WM8994_AIF1_BCLK_INV; + break; + case SND_SOC_DAIFMT_NB_IF: + aif |= WM8994_AIF1_LRCLK_INV; + break; + default: + debug("%s: Invalid i2s clock polarity selection\n", + __func__); + return -1; + } + break; + default: + debug("%s: Invalid i2s format selection\n", __func__); + return -1; + } + + error = wm8994_update_bits(aif_reg, WM8994_AIF1_BCLK_INV | + WM8994_AIF1_LRCLK_INV_MASK | WM8994_AIF1_FMT_MASK, aif); + + error |= wm8994_update_bits(ms_reg, WM8994_AIF1_MSTR_MASK, ms); + error |= wm8994_update_bits(aif_clk, WM8994_AIF1CLK_ENA_MASK, + WM8994_AIF1CLK_ENA); + if (error < 0) { + debug("%s: codec register access error\n", __func__); + return -1; + } + + return 0; +} + +/* + * Sets hw params FOR WM8994 + * + * @param wm8994 wm8994 information pointer + * @param aif_id Audio interface ID + * @param sampling_rate Sampling rate + * @param bits_per_sample Bits per sample + * @param Channels Channels in the given audio input + * + * @return -1 for error and 0 Success. + */ +static int wm8994_hw_params(struct wm8994_priv *wm8994, int aif_id, + unsigned int sampling_rate, unsigned int bits_per_sample, + unsigned int channels) +{ + int aif1_reg; + int aif2_reg; + int bclk_reg; + int bclk = 0; + int rate_reg; + int aif1 = 0; + int aif2 = 0; + int rate_val = 0; + int id = aif_id - 1; + int i, cur_val, best_val, bclk_rate, best; + unsigned short reg_data; + int ret = 0; + + switch (aif_id) { + case 1: + aif1_reg = WM8994_AIF1_CONTROL_1; + aif2_reg = WM8994_AIF1_CONTROL_2; + bclk_reg = WM8994_AIF1_BCLK; + rate_reg = WM8994_AIF1_RATE; + break; + case 2: + aif1_reg = WM8994_AIF2_CONTROL_1; + aif2_reg = WM8994_AIF2_CONTROL_2; + bclk_reg = WM8994_AIF2_BCLK; + rate_reg = WM8994_AIF2_RATE; + break; + default: + return -1; + } + + bclk_rate = sampling_rate * 32; + switch (bits_per_sample) { + case 16: + bclk_rate *= 16; + break; + case 20: + bclk_rate *= 20; + aif1 |= 0x20; + break; + case 24: + bclk_rate *= 24; + aif1 |= 0x40; + break; + case 32: + bclk_rate *= 32; + aif1 |= 0x60; + break; + default: + return -1; + } + + /* Try to find an appropriate sample rate; look for an exact match. */ + for (i = 0; i < ARRAY_SIZE(src_rate); i++) + if (src_rate[i] == sampling_rate) + break; + + if (i == ARRAY_SIZE(src_rate)) { + debug("%s: Could not get the best matching samplingrate\n", + __func__); + return -1; + } + + rate_val |= i << WM8994_AIF1_SR_SHIFT; + + /* AIFCLK/fs ratio; look for a close match in either direction */ + best = 0; + best_val = abs((fs_ratios[0] * sampling_rate) + - wm8994->aifclk[id]); + + for (i = 1; i < ARRAY_SIZE(fs_ratios); i++) { + cur_val = abs((fs_ratios[i] * sampling_rate) + - wm8994->aifclk[id]); + if (cur_val >= best_val) + continue; + best = i; + best_val = cur_val; + } + + rate_val |= best; + + /* + * We may not get quite the right frequency if using + * approximate clocks so look for the closest match that is + * higher than the target (we need to ensure that there enough + * BCLKs to clock out the samples). + */ + best = 0; + for (i = 0; i < ARRAY_SIZE(bclk_divs); i++) { + cur_val = (wm8994->aifclk[id] * 10 / bclk_divs[i]) - bclk_rate; + if (cur_val < 0) /* BCLK table is sorted */ + break; + best = i; + } + + if (i == ARRAY_SIZE(bclk_divs)) { + debug("%s: Could not get the best matching bclk division\n", + __func__); + return -1; + } + + bclk_rate = wm8994->aifclk[id] * 10 / bclk_divs[best]; + bclk |= best << WM8994_AIF1_BCLK_DIV_SHIFT; + + if (wm8994_i2c_read(aif1_reg, ®_data) != 0) { + debug("%s: AIF1 register read Failed\n", __func__); + return -1; + } + + if ((channels == 1) && ((reg_data & 0x18) == 0x18)) + aif2 |= WM8994_AIF1_MONO; + + if (wm8994->aifclk[id] == 0) { + debug("%s:Audio interface clock not set\n", __func__); + return -1; + } + + ret = wm8994_update_bits(aif1_reg, WM8994_AIF1_WL_MASK, aif1); + ret |= wm8994_update_bits(aif2_reg, WM8994_AIF1_MONO, aif2); + ret |= wm8994_update_bits(bclk_reg, WM8994_AIF1_BCLK_DIV_MASK, bclk); + ret |= wm8994_update_bits(rate_reg, WM8994_AIF1_SR_MASK | + WM8994_AIF1CLK_RATE_MASK, rate_val); + + debug("rate vale = %x , bclk val= %x\n", rate_val, bclk); + + if (ret < 0) { + debug("%s: codec register access error\n", __func__); + return -1; + } + + return 0; +} + +/* + * Configures Audio interface Clock + * + * @param wm8994 wm8994 information pointer + * @param aif Audio Interface ID + * + * @return -1 for error and 0 Success. + */ +static int configure_aif_clock(struct wm8994_priv *wm8994, int aif) +{ + int rate; + int reg1 = 0; + int offset; + int ret; + + /* AIF(1/0) register adress offset calculated */ + if (aif) + offset = 4; + else + offset = 0; + + switch (wm8994->sysclk[aif]) { + case WM8994_SYSCLK_MCLK1: + reg1 |= SEL_MCLK1; + rate = wm8994->mclk[0]; + break; + + case WM8994_SYSCLK_MCLK2: + reg1 |= SEL_MCLK2; + rate = wm8994->mclk[1]; + break; + + case WM8994_SYSCLK_FLL1: + reg1 |= SEL_FLL1; + rate = wm8994->fll[0].out; + break; + + case WM8994_SYSCLK_FLL2: + reg1 |= SEL_FLL2; + rate = wm8994->fll[1].out; + break; + + default: + debug("%s: Invalid input clock selection [%d]\n", + __func__, wm8994->sysclk[aif]); + return -1; + } + + /* if input clock frequenct is more than 135Mhz then divide */ + if (rate >= WM8994_MAX_INPUT_CLK_FREQ) { + rate /= 2; + reg1 |= WM8994_AIF1CLK_DIV; + } + + wm8994->aifclk[aif] = rate; + + ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_1 + offset, + WM8994_AIF1CLK_SRC_MASK | WM8994_AIF1CLK_DIV, + reg1); + + ret |= wm8994_update_bits(WM8994_CLOCKING_1, + WM8994_SYSCLK_SRC | WM8994_AIF2DSPCLK_ENA_MASK | + WM8994_SYSDSPCLK_ENA_MASK, WM8994_SYSCLK_SRC | + WM8994_AIF2DSPCLK_ENA | WM8994_SYSDSPCLK_ENA); + + if (ret < 0) { + debug("%s: codec register access error\n", __func__); + return -1; + } + + return 0; +} + +/* + * Configures Audio interface for the given frequency + * + * @param wm8994 wm8994 information + * @param aif_id Audio Interface + * @param clk_id Input Clock ID + * @param freq Sampling frequency in Hz + * + * @return -1 for error and 0 success. + */ +static int wm8994_set_sysclk(struct wm8994_priv *wm8994, int aif_id, + int clk_id, unsigned int freq) +{ + int i; + int ret = 0; + + wm8994->sysclk[aif_id - 1] = clk_id; + + switch (clk_id) { + case WM8994_SYSCLK_MCLK1: + wm8994->mclk[0] = freq; + if (aif_id == 2) { + ret = wm8994_update_bits(WM8994_AIF1_CLOCKING_2 , + WM8994_AIF2DAC_DIV_MASK , 0); + } + break; + + case WM8994_SYSCLK_MCLK2: + /* TODO: Set GPIO AF */ + wm8994->mclk[1] = freq; + break; + + case WM8994_SYSCLK_FLL1: + case WM8994_SYSCLK_FLL2: + break; + + case WM8994_SYSCLK_OPCLK: + /* + * Special case - a division (times 10) is given and + * no effect on main clocking. + */ + if (freq) { + for (i = 0; i < ARRAY_SIZE(opclk_divs); i++) + if (opclk_divs[i] == freq) + break; + if (i == ARRAY_SIZE(opclk_divs)) { + debug("%s frequency divisor not found\n", + __func__); + return -1; + } + ret = wm8994_update_bits(WM8994_CLOCKING_2, + WM8994_OPCLK_DIV_MASK, i); + ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_2, + WM8994_OPCLK_ENA, WM8994_OPCLK_ENA); + } else { + ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_2, + WM8994_OPCLK_ENA, 0); + } + + default: + debug("%s Invalid input clock selection [%d]\n", + __func__, clk_id); + return -1; + } + + ret |= configure_aif_clock(wm8994, aif_id - 1); + + if (ret < 0) { + debug("%s: codec register access error\n", __func__); + return -1; + } + + return 0; +} + +/* + * Initializes Volume for AIF2 to HP path + * + * @returns -1 for error and 0 Success. + * + */ +static int wm8994_init_volume_aif2_dac1(void) +{ + int ret; + + /* Unmute AIF2DAC */ + ret = wm8994_update_bits(WM8994_AIF2_DAC_FILTERS_1, + WM8994_AIF2DAC_MUTE_MASK, 0); + + + ret |= wm8994_update_bits(WM8994_AIF2_DAC_LEFT_VOLUME, + WM8994_AIF2DAC_VU_MASK | WM8994_AIF2DACL_VOL_MASK, + WM8994_AIF2DAC_VU | 0xff); + + ret |= wm8994_update_bits(WM8994_AIF2_DAC_RIGHT_VOLUME, + WM8994_AIF2DAC_VU_MASK | WM8994_AIF2DACR_VOL_MASK, + WM8994_AIF2DAC_VU | 0xff); + + + ret |= wm8994_update_bits(WM8994_DAC1_LEFT_VOLUME, + WM8994_DAC1_VU_MASK | WM8994_DAC1L_VOL_MASK | + WM8994_DAC1L_MUTE_MASK, WM8994_DAC1_VU | 0xc0); + + ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_VOLUME, + WM8994_DAC1_VU_MASK | WM8994_DAC1R_VOL_MASK | + WM8994_DAC1R_MUTE_MASK, WM8994_DAC1_VU | 0xc0); + /* Head Phone Volume */ + ret |= wm8994_i2c_write(WM8994_LEFT_OUTPUT_VOLUME, 0x12D); + ret |= wm8994_i2c_write(WM8994_RIGHT_OUTPUT_VOLUME, 0x12D); + + if (ret < 0) { + debug("%s: codec register access error\n", __func__); + return -1; + } + + return 0; +} + +/* + * Intialise wm8994 codec device + * + * @param wm8994 wm8994 information + * + * @returns -1 for error and 0 Success. + */ +static int wm8994_device_init(struct wm8994_priv *wm8994) +{ + const char *devname; + unsigned short reg_data; + int ret; + + wm8994_i2c_write(WM8994_SOFTWARE_RESET, WM8994_SW_RESET);/* Reset */ + + ret = wm8994_i2c_read(WM8994_SOFTWARE_RESET, ®_data); + if (ret < 0) { + debug("Failed to read ID register\n"); + goto err; + } + + if (reg_data == WM8994_ID) { + devname = "WM8994"; + debug("Device registered as type %d\n", wm8994->type); + wm8994->type = WM8994; + } else { + debug("Device is not a WM8994, ID is %x\n", ret); + ret = -1; + goto err; + } + + ret = wm8994_i2c_read(WM8994_CHIP_REVISION, ®_data); + if (ret < 0) { + debug("Failed to read revision register: %d\n", ret); + goto err; + } + wm8994->revision = reg_data; + debug("%s revision %c\n", devname, 'A' + wm8994->revision); + + /* VMID Selection */ + ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1, + WM8994_VMID_SEL_MASK | WM8994_BIAS_ENA_MASK, 0x3); + + /* Charge Pump Enable */ + ret |= wm8994_update_bits(WM8994_CHARGE_PUMP_1, WM8994_CP_ENA_MASK, + WM8994_CP_ENA); + + /* Head Phone Power Enable */ + ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1, + WM8994_HPOUT1L_ENA_MASK, WM8994_HPOUT1L_ENA); + + ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_1, + WM8994_HPOUT1R_ENA_MASK, WM8994_HPOUT1R_ENA); + + /* Power enable for AIF2 and DAC1 */ + ret |= wm8994_update_bits(WM8994_POWER_MANAGEMENT_5, + WM8994_AIF2DACL_ENA_MASK | WM8994_AIF2DACR_ENA_MASK | + WM8994_DAC1L_ENA_MASK | WM8994_DAC1R_ENA_MASK, + WM8994_AIF2DACL_ENA | WM8994_AIF2DACR_ENA | WM8994_DAC1L_ENA | + WM8994_DAC1R_ENA); + + /* Head Phone Initialisation */ + ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1, + WM8994_HPOUT1L_DLY_MASK | WM8994_HPOUT1R_DLY_MASK, + WM8994_HPOUT1L_DLY | WM8994_HPOUT1R_DLY); + + ret |= wm8994_update_bits(WM8994_DC_SERVO_1, + WM8994_DCS_ENA_CHAN_0_MASK | + WM8994_DCS_ENA_CHAN_1_MASK , WM8994_DCS_ENA_CHAN_0 | + WM8994_DCS_ENA_CHAN_1); + + ret |= wm8994_update_bits(WM8994_ANALOGUE_HP_1, + WM8994_HPOUT1L_DLY_MASK | + WM8994_HPOUT1R_DLY_MASK | WM8994_HPOUT1L_OUTP_MASK | + WM8994_HPOUT1R_OUTP_MASK | + WM8994_HPOUT1L_RMV_SHORT_MASK | + WM8994_HPOUT1R_RMV_SHORT_MASK, WM8994_HPOUT1L_DLY | + WM8994_HPOUT1R_DLY | WM8994_HPOUT1L_OUTP | + WM8994_HPOUT1R_OUTP | WM8994_HPOUT1L_RMV_SHORT | + WM8994_HPOUT1R_RMV_SHORT); + + /* MIXER Config DAC1 to HP */ + ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_1, + WM8994_DAC1L_TO_HPOUT1L_MASK, WM8994_DAC1L_TO_HPOUT1L); + + ret |= wm8994_update_bits(WM8994_OUTPUT_MIXER_2, + WM8994_DAC1R_TO_HPOUT1R_MASK, WM8994_DAC1R_TO_HPOUT1R); + + /* Routing AIF2 to DAC1 */ + ret |= wm8994_update_bits(WM8994_DAC1_LEFT_MIXER_ROUTING, + WM8994_AIF2DACL_TO_DAC1L_MASK, + WM8994_AIF2DACL_TO_DAC1L); + + ret |= wm8994_update_bits(WM8994_DAC1_RIGHT_MIXER_ROUTING, + WM8994_AIF2DACR_TO_DAC1R_MASK, + WM8994_AIF2DACR_TO_DAC1R); + + /* GPIO Settings for AIF2 */ + /* B CLK */ + ret |= wm8994_update_bits(WM8994_GPIO_3, WM8994_GPIO_DIR_MASK | + WM8994_GPIO_FUNCTION_MASK , + WM8994_GPIO_DIR_OUTPUT | + WM8994_GPIO_FUNCTION_I2S_CLK); + + /* LR CLK */ + ret |= wm8994_update_bits(WM8994_GPIO_4, WM8994_GPIO_DIR_MASK | + WM8994_GPIO_FUNCTION_MASK, + WM8994_GPIO_DIR_OUTPUT | + WM8994_GPIO_FUNCTION_I2S_CLK); + + /* DATA */ + ret |= wm8994_update_bits(WM8994_GPIO_5, WM8994_GPIO_DIR_MASK | + WM8994_GPIO_FUNCTION_MASK, + WM8994_GPIO_DIR_OUTPUT | + WM8994_GPIO_FUNCTION_I2S_CLK); + + ret |= wm8994_init_volume_aif2_dac1(); + if (ret < 0) + goto err; + + debug("%s: Codec chip init ok\n", __func__); + return 0; +err: + debug("%s: Codec chip init error\n", __func__); + return -1; +} + +/*wm8994 Device Initialisation */ +int wm8994_init(struct sound_codec_info *pcodec_info, + enum en_audio_interface aif_id, + int sampling_rate, int mclk_freq, + int bits_per_sample, unsigned int channels) +{ + int ret = 0; + + /* shift the device address by 1 for 7 bit addressing */ + g_wm8994_i2c_dev_addr = pcodec_info->i2c_dev_addr; + wm8994_i2c_init(pcodec_info->i2c_bus); + + if (pcodec_info->codec_type == CODEC_WM_8994) + g_wm8994_info.type = WM8994; + else { + debug("%s: Codec id [%d] not defined\n", __func__, + pcodec_info->codec_type); + return -1; + } + + ret = wm8994_device_init(&g_wm8994_info); + if (ret < 0) { + debug("%s: wm8994 codec chip init failed\n", __func__); + return ret; + } + + ret = wm8994_set_sysclk(&g_wm8994_info, aif_id, WM8994_SYSCLK_MCLK1, + mclk_freq); + if (ret < 0) { + debug("%s: wm8994 codec set sys clock failed\n", __func__); + return ret; + } + + ret = wm8994_hw_params(&g_wm8994_info, aif_id, sampling_rate, + bits_per_sample, channels); + + if (ret == 0) { + ret = wm8994_set_fmt(aif_id, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBS_CFS); + } + return ret; +} diff --git a/drivers/sound/wm8994.h b/drivers/sound/wm8994.h new file mode 100644 index 0000000..a8f0de1 --- /dev/null +++ b/drivers/sound/wm8994.h @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chadrasekar <rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __WM8994_H__ +#define __WM8994_H__ + +/* Sources for AIF1/2 SYSCLK - use with set_dai_sysclk() */ +#define WM8994_SYSCLK_MCLK1 1 +#define WM8994_SYSCLK_MCLK2 2 +#define WM8994_SYSCLK_FLL1 3 +#define WM8994_SYSCLK_FLL2 4 + +/* Avilable audi interface ports in wm8994 codec */ +enum en_audio_interface { + WM8994_AIF1 = 1, + WM8994_AIF2, + WM8994_AIF3 +}; + +/* OPCLK is also configured with set_dai_sysclk, specify division*10 as rate. */ +#define WM8994_SYSCLK_OPCLK 5 + +#define WM8994_FLL1 1 +#define WM8994_FLL2 2 + +#define WM8994_FLL_SRC_MCLK1 1 +#define WM8994_FLL_SRC_MCLK2 2 +#define WM8994_FLL_SRC_LRCLK 3 +#define WM8994_FLL_SRC_BCLK 4 + +/* maximum available digital interfac in the dac to configure */ +#define WM8994_MAX_AIF 2 + +#define WM8994_MAX_INPUT_CLK_FREQ 13500000 +#define WM8994_ID 0x8994 + +enum wm8994_vmid_mode { + WM8994_VMID_NORMAL, + WM8994_VMID_FORCE, +}; + +/* wm 8994 family devices */ +enum wm8994_type { + WM8994 = 0, + WM8958 = 1, + WM1811 = 2, +}; + +/* + * intialise wm8994 sound codec device for the given configuration + * + * @param pcodec_info pointer value of the sound codec info structure + * parsed from device tree + * @param aif_id enum value of codec interface port in which + * soc i2s is connected + * @param sampling_rate Sampling rate ranges between from 8khz to 96khz + * @param mclk_freq Master clock frequency. + * @param bits_per_sample bits per Sample can be 16 or 24 + * @param channels Number of channnels, maximum 2 + * + * @returns -1 for error and 0 Success. + */ +int wm8994_init(struct sound_codec_info *pcodec_info, + enum en_audio_interface aif_id, + int sampling_rate, int mclk_freq, + int bits_per_sample, unsigned int channels); +#endif /*__WM8994_H__ */ diff --git a/drivers/sound/wm8994_registers.h b/drivers/sound/wm8994_registers.h new file mode 100644 index 0000000..f455b11 --- /dev/null +++ b/drivers/sound/wm8994_registers.h @@ -0,0 +1,299 @@ +/* + * (C) Copyright 2012 Samsung Electronics + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __WM8994_REGISTERS_H__ +#define __WM8994_REGISTERS_H__ + +/* + * Register values. + */ +#define WM8994_SOFTWARE_RESET 0x00 +#define WM8994_POWER_MANAGEMENT_1 0x01 +#define WM8994_POWER_MANAGEMENT_2 0x02 +#define WM8994_POWER_MANAGEMENT_5 0x05 +#define WM8994_LEFT_OUTPUT_VOLUME 0x1C +#define WM8994_RIGHT_OUTPUT_VOLUME 0x1D +#define WM8994_OUTPUT_MIXER_1 0x2D +#define WM8994_OUTPUT_MIXER_2 0x2E +#define WM8994_CHARGE_PUMP_1 0x4C +#define WM8994_DC_SERVO_1 0x54 +#define WM8994_ANALOGUE_HP_1 0x60 +#define WM8994_CHIP_REVISION 0x100 +#define WM8994_AIF1_CLOCKING_1 0x200 +#define WM8994_AIF1_CLOCKING_2 0x201 +#define WM8994_AIF2_CLOCKING_1 0x204 +#define WM8994_CLOCKING_1 0x208 +#define WM8994_CLOCKING_2 0x209 +#define WM8994_AIF1_RATE 0x210 +#define WM8994_AIF2_RATE 0x211 +#define WM8994_RATE_STATUS 0x212 +#define WM8994_AIF1_CONTROL_1 0x300 +#define WM8994_AIF1_CONTROL_2 0x301 +#define WM8994_AIF1_MASTER_SLAVE 0x302 +#define WM8994_AIF1_BCLK 0x303 +#define WM8994_AIF2_CONTROL_1 0x310 +#define WM8994_AIF2_CONTROL_2 0x311 +#define WM8994_AIF2_MASTER_SLAVE 0x312 +#define WM8994_AIF2_BCLK 0x313 +#define WM8994_AIF2_DAC_LEFT_VOLUME 0x502 +#define WM8994_AIF2_DAC_RIGHT_VOLUME 0x503 +#define WM8994_AIF2_DAC_FILTERS_1 0x520 +#define WM8994_DAC1_LEFT_MIXER_ROUTING 0x601 +#define WM8994_DAC1_RIGHT_MIXER_ROUTING 0x602 +#define WM8994_DAC1_LEFT_VOLUME 0x610 +#define WM8994_DAC1_RIGHT_VOLUME 0x611 +#define WM8994_GPIO_3 0x702 +#define WM8994_GPIO_4 0x703 +#define WM8994_GPIO_5 0x704 + +/* + * Field Definitions. + */ + +/* + * R0 (0x00) - Software Reset + */ +/* SW_RESET */ +#define WM8994_SW_RESET 1 +/* + * R1 (0x01) - Power Management (1) + */ +/* HPOUT1L_ENA */ +#define WM8994_HPOUT1L_ENA 0x0200 +/* HPOUT1L_ENA */ +#define WM8994_HPOUT1L_ENA_MASK 0x0200 +/* HPOUT1R_ENA */ +#define WM8994_HPOUT1R_ENA 0x0100 +/* HPOUT1R_ENA */ +#define WM8994_HPOUT1R_ENA_MASK 0x0100 +/* VMID_SEL - [2:1] */ +#define WM8994_VMID_SEL_MASK 0x0006 +/* BIAS_ENA */ +#define WM8994_BIAS_ENA 0x0001 +/* BIAS_ENA */ +#define WM8994_BIAS_ENA_MASK 0x0001 + +/* + * R2 (0x02) - Power Management (2) + */ +/* OPCLK_ENA */ +#define WM8994_OPCLK_ENA 0x0800 + +/* + * R5 (0x05) - Power Management (5) + */ +/* AIF2DACL_ENA */ +#define WM8994_AIF2DACL_ENA 0x2000 +#define WM8994_AIF2DACL_ENA_MASK 0x2000 +/* AIF2DACR_ENA */ +#define WM8994_AIF2DACR_ENA 0x1000 +#define WM8994_AIF2DACR_ENA_MASK 0x1000 +/* DAC1L_ENA */ +#define WM8994_DAC1L_ENA 0x0002 +#define WM8994_DAC1L_ENA_MASK 0x0002 +/* DAC1R_ENA */ +#define WM8994_DAC1R_ENA 0x0001 +#define WM8994_DAC1R_ENA_MASK 0x0001 + +/* + * R45 (0x2D) - Output Mixer (1) + */ +/* DAC1L_TO_HPOUT1L */ +#define WM8994_DAC1L_TO_HPOUT1L 0x0100 +#define WM8994_DAC1L_TO_HPOUT1L_MASK 0x0100 + +/* + * R46 (0x2E) - Output Mixer (2) + */ +/* DAC1R_TO_HPOUT1R */ +#define WM8994_DAC1R_TO_HPOUT1R 0x0100 +#define WM8994_DAC1R_TO_HPOUT1R_MASK 0x0100 + +/* + * R76 (0x4C) - Charge Pump (1) + */ +/* CP_ENA */ +#define WM8994_CP_ENA 0x8000 +#define WM8994_CP_ENA_MASK 0x8000 +/* + * R84 (0x54) - DC Servo (1) + */ +/* DCS_ENA_CHAN_1 */ +#define WM8994_DCS_ENA_CHAN_1 0x0002 +#define WM8994_DCS_ENA_CHAN_1_MASK 0x0002 +/* DCS_ENA_CHAN_0 */ +#define WM8994_DCS_ENA_CHAN_0 0x0001 +#define WM8994_DCS_ENA_CHAN_0_MASK 0x0001 + +/* + * R96 (0x60) - Analogue HP (1) + */ +/* HPOUT1L_RMV_SHORT */ +#define WM8994_HPOUT1L_RMV_SHORT 0x0080 +#define WM8994_HPOUT1L_RMV_SHORT_MASK 0x0080 +/* HPOUT1L_OUTP */ +#define WM8994_HPOUT1L_OUTP 0x0040 +#define WM8994_HPOUT1L_OUTP_MASK 0x0040 +/* HPOUT1L_DLY */ +#define WM8994_HPOUT1L_DLY 0x0020 +#define WM8994_HPOUT1L_DLY_MASK 0x0020 +/* HPOUT1R_RMV_SHORT */ +#define WM8994_HPOUT1R_RMV_SHORT 0x0008 +#define WM8994_HPOUT1R_RMV_SHORT_MASK 0x0008 +/* HPOUT1R_OUTP */ +#define WM8994_HPOUT1R_OUTP 0x0004 +#define WM8994_HPOUT1R_OUTP_MASK 0x0004 +/* HPOUT1R_DLY */ +#define WM8994_HPOUT1R_DLY 0x0002 +#define WM8994_HPOUT1R_DLY_MASK 0x0002 + +/* + * R512 (0x200) - AIF1 Clocking (1) + */ +/* AIF1CLK_SRC - [4:3] */ +#define WM8994_AIF1CLK_SRC_MASK 0x0018 +/* AIF1CLK_DIV */ +#define WM8994_AIF1CLK_DIV 0x0002 +/* AIF1CLK_ENA */ +#define WM8994_AIF1CLK_ENA 0x0001 +#define WM8994_AIF1CLK_ENA_MASK 0x0001 + +/* + * R517 (0x205) - AIF2 Clocking (2) + */ +/* AIF2DAC_DIV - [5:3] */ +#define WM8994_AIF2DAC_DIV_MASK 0x0038 + +/* + * R520 (0x208) - Clocking (1) + */ +/* AIF2DSPCLK_ENA */ +#define WM8994_AIF2DSPCLK_ENA 0x0004 +#define WM8994_AIF2DSPCLK_ENA_MASK 0x0004 +/* SYSDSPCLK_ENA */ +#define WM8994_SYSDSPCLK_ENA 0x0002 +#define WM8994_SYSDSPCLK_ENA_MASK 0x0002 +/* SYSCLK_SRC */ +#define WM8994_SYSCLK_SRC 0x0001 + +/* + * R521 (0x209) - Clocking (2) + */ +/* OPCLK_DIV - [2:0] */ +#define WM8994_OPCLK_DIV_MASK 0x0007 + +/* + * R528 (0x210) - AIF1 Rate + */ +/* AIF1_SR - [7:4] */ +#define WM8994_AIF1_SR_MASK 0x00F0 +#define WM8994_AIF1_SR_SHIFT 4 +/* AIF1CLK_RATE - [3:0] */ +#define WM8994_AIF1CLK_RATE_MASK 0x000F + +/* + * R768 (0x300) - AIF1 Control (1) + */ +/* AIF1_BCLK_INV */ +#define WM8994_AIF1_BCLK_INV 0x0100 +/* AIF1_LRCLK_INV */ +#define WM8994_AIF1_LRCLK_INV 0x0080 +#define WM8994_AIF1_LRCLK_INV_MASK 0x0080 +/* AIF1_WL - [6:5] */ +#define WM8994_AIF1_WL_MASK 0x0060 +/* AIF1_FMT - [4:3] */ +#define WM8994_AIF1_FMT_MASK 0x0018 + +/* + * R769 (0x301) - AIF1 Control (2) + */ +/* AIF1_MONO */ +#define WM8994_AIF1_MONO 0x0100 + +/* + * R770 (0x302) - AIF1 Master/Slave + */ +/* AIF1_MSTR */ +#define WM8994_AIF1_MSTR 0x4000 +#define WM8994_AIF1_MSTR_MASK 0x4000 + +/* + * R771 (0x303) - AIF1 BCLK + */ +/* AIF1_BCLK_DIV - [8:4] */ +#define WM8994_AIF1_BCLK_DIV_MASK 0x01F0 +#define WM8994_AIF1_BCLK_DIV_SHIFT 4 + +/* + * R1282 (0x502) - AIF2 DAC Left Volume + */ +/* AIF2DAC_VU */ +#define WM8994_AIF2DAC_VU 0x0100 +#define WM8994_AIF2DAC_VU_MASK 0x0100 +/* AIF2DACL_VOL - [7:0] */ +#define WM8994_AIF2DACL_VOL_MASK 0x00FF + +/* + * R1283 (0x503) - AIF2 DAC Right Volume + */ +/* AIF2DACR_VOL - [7:0] */ +#define WM8994_AIF2DACR_VOL_MASK 0x00FF + +/* + * R1312 (0x520) - AIF2 DAC Filters (1) + */ +/* AIF2DAC_MUTE */ +#define WM8994_AIF2DAC_MUTE_MASK 0x0200 + +/* + * R1537 (0x601) - DAC1 Left Mixer Routing + */ +/* AIF2DACL_TO_DAC1L */ +#define WM8994_AIF2DACL_TO_DAC1L 0x0004 +#define WM8994_AIF2DACL_TO_DAC1L_MASK 0x0004 + +/* + * R1538 (0x602) - DAC1 Right Mixer Routing + */ +/* AIF2DACR_TO_DAC1R */ +#define WM8994_AIF2DACR_TO_DAC1R 0x0004 +#define WM8994_AIF2DACR_TO_DAC1R_MASK 0x0004 + +/* + * R1552 (0x610) - DAC1 Left Volume + */ +/* DAC1L_MUTE */ +#define WM8994_DAC1L_MUTE_MASK 0x0200 +/* DAC1_VU */ +#define WM8994_DAC1_VU 0x0100 +#define WM8994_DAC1_VU_MASK 0x0100 +/* DAC1L_VOL - [7:0] */ +#define WM8994_DAC1L_VOL_MASK 0x00FF + +/* + * R1553 (0x611) - DAC1 Right Volume + */ +/* DAC1R_MUTE */ +#define WM8994_DAC1R_MUTE_MASK 0x0200 +/* DAC1R_VOL - [7:0] */ +#define WM8994_DAC1R_VOL_MASK 0x00FF + +/* + * GPIO + */ +/* OUTPUT PIN */ +#define WM8994_GPIO_DIR_OUTPUT 0x8000 +/* GPIO PIN MASK */ +#define WM8994_GPIO_DIR_MASK 0xFFE0 +/* I2S CLK */ +#define WM8994_GPIO_FUNCTION_I2S_CLK 0x0000 +/* GPn FN */ +#define WM8994_GPIO_FUNCTION_MASK 0x001F +#endif diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index f0b82c6..824d357 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -34,6 +34,7 @@ COBJS-$(CONFIG_BFIN_SPI) += bfin_spi.o COBJS-$(CONFIG_CF_SPI) += cf_spi.o COBJS-$(CONFIG_CF_QSPI) += cf_qspi.o COBJS-$(CONFIG_DAVINCI_SPI) += davinci_spi.o +COBJS-$(CONFIG_EXYNOS_SPI) += exynos_spi.o COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o diff --git a/drivers/spi/exynos_spi.c b/drivers/spi/exynos_spi.c new file mode 100644 index 0000000..3e6c18f --- /dev/null +++ b/drivers/spi/exynos_spi.c @@ -0,0 +1,367 @@ +/* + * (C) Copyright 2012 SAMSUNG Electronics + * Padmavathi Venna <padma.v@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <common.h> +#include <malloc.h> +#include <spi.h> +#include <asm/arch/clk.h> +#include <asm/arch/clock.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/pinmux.h> +#include <asm/arch-exynos/spi.h> +#include <asm/io.h> + +/* Information about each SPI controller */ +struct spi_bus { + enum periph_id periph_id; + s32 frequency; /* Default clock frequency, -1 for none */ + struct exynos_spi *regs; + int inited; /* 1 if this bus is ready for use */ +}; + +/* A list of spi buses that we know about */ +static struct spi_bus spi_bus[EXYNOS5_SPI_NUM_CONTROLLERS]; + +struct exynos_spi_slave { + struct spi_slave slave; + struct exynos_spi *regs; + unsigned int freq; /* Default frequency */ + unsigned int mode; + enum periph_id periph_id; /* Peripheral ID for this device */ + unsigned int fifo_size; +}; + +static struct spi_bus *spi_get_bus(unsigned dev_index) +{ + if (dev_index < EXYNOS5_SPI_NUM_CONTROLLERS) + return &spi_bus[dev_index]; + debug("%s: invalid bus %d", __func__, dev_index); + + return NULL; +} + +static inline struct exynos_spi_slave *to_exynos_spi(struct spi_slave *slave) +{ + return container_of(slave, struct exynos_spi_slave, slave); +} + +/** + * Setup the driver private data + * + * @param bus ID of the bus that the slave is attached to + * @param cs ID of the chip select connected to the slave + * @param max_hz Required spi frequency + * @param mode Required spi mode (clk polarity, clk phase and + * master or slave) + * @return new device or NULL + */ +struct spi_slave *spi_setup_slave(unsigned int busnum, unsigned int cs, + unsigned int max_hz, unsigned int mode) +{ + struct exynos_spi_slave *spi_slave; + struct spi_bus *bus; + + if (!spi_cs_is_valid(busnum, cs)) { + debug("%s: Invalid bus/chip select %d, %d\n", __func__, + busnum, cs); + return NULL; + } + + spi_slave = malloc(sizeof(*spi_slave)); + if (!spi_slave) { + debug("%s: Could not allocate spi_slave\n", __func__); + return NULL; + } + + bus = &spi_bus[busnum]; + spi_slave->slave.bus = busnum; + spi_slave->slave.cs = cs; + spi_slave->regs = bus->regs; + spi_slave->mode = mode; + spi_slave->periph_id = bus->periph_id; + if (bus->periph_id == PERIPH_ID_SPI1 || + bus->periph_id == PERIPH_ID_SPI2) + spi_slave->fifo_size = 64; + else + spi_slave->fifo_size = 256; + + spi_slave->freq = bus->frequency; + if (max_hz) + spi_slave->freq = min(max_hz, spi_slave->freq); + + return &spi_slave->slave; +} + +/** + * Free spi controller + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +void spi_free_slave(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + + free(spi_slave); +} + +/** + * Flush spi tx, rx fifos and reset the SPI controller + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +static void spi_flush_fifo(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + struct exynos_spi *regs = spi_slave->regs; + + clrsetbits_le32(®s->ch_cfg, SPI_CH_HS_EN, SPI_CH_RST); + clrbits_le32(®s->ch_cfg, SPI_CH_RST); + setbits_le32(®s->ch_cfg, SPI_TX_CH_ON | SPI_RX_CH_ON); +} + +/** + * Initialize the spi base registers, set the required clock frequency and + * initialize the gpios + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + * @return zero on success else a negative value + */ +int spi_claim_bus(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + struct exynos_spi *regs = spi_slave->regs; + u32 reg = 0; + int ret; + + ret = set_spi_clk(spi_slave->periph_id, + spi_slave->freq); + if (ret < 0) { + debug("%s: Failed to setup spi clock\n", __func__); + return ret; + } + + exynos_pinmux_config(spi_slave->periph_id, PINMUX_FLAG_NONE); + + spi_flush_fifo(slave); + + reg = readl(®s->ch_cfg); + reg &= ~(SPI_CH_CPHA_B | SPI_CH_CPOL_L); + + if (spi_slave->mode & SPI_CPHA) + reg |= SPI_CH_CPHA_B; + + if (spi_slave->mode & SPI_CPOL) + reg |= SPI_CH_CPOL_L; + + writel(reg, ®s->ch_cfg); + writel(SPI_FB_DELAY_180, ®s->fb_clk); + + return 0; +} + +/** + * Reset the spi H/W and flush the tx and rx fifos + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +void spi_release_bus(struct spi_slave *slave) +{ + spi_flush_fifo(slave); +} + +static void spi_get_fifo_levels(struct exynos_spi *regs, + int *rx_lvl, int *tx_lvl) +{ + uint32_t spi_sts = readl(®s->spi_sts); + + *rx_lvl = (spi_sts >> SPI_RX_LVL_OFFSET) & SPI_FIFO_LVL_MASK; + *tx_lvl = (spi_sts >> SPI_TX_LVL_OFFSET) & SPI_FIFO_LVL_MASK; +} + +/** + * If there's something to transfer, do a software reset and set a + * transaction size. + * + * @param regs SPI peripheral registers + * @param count Number of bytes to transfer + */ +static void spi_request_bytes(struct exynos_spi *regs, int count) +{ + assert(count && count < (1 << 16)); + setbits_le32(®s->ch_cfg, SPI_CH_RST); + clrbits_le32(®s->ch_cfg, SPI_CH_RST); + writel(count | SPI_PACKET_CNT_EN, ®s->pkt_cnt); +} + +static void spi_rx_tx(struct exynos_spi_slave *spi_slave, int todo, + void **dinp, void const **doutp) +{ + struct exynos_spi *regs = spi_slave->regs; + uchar *rxp = *dinp; + const uchar *txp = *doutp; + int rx_lvl, tx_lvl; + uint out_bytes, in_bytes; + + out_bytes = in_bytes = todo; + + /* + * If there's something to send, do a software reset and set a + * transaction size. + */ + spi_request_bytes(regs, todo); + + /* + * Bytes are transmitted/received in pairs. Wait to receive all the + * data because then transmission will be done as well. + */ + while (in_bytes) { + int temp; + + /* Keep the fifos full/empty. */ + spi_get_fifo_levels(regs, &rx_lvl, &tx_lvl); + if (tx_lvl < spi_slave->fifo_size && out_bytes) { + temp = txp ? *txp++ : 0xff; + writel(temp, ®s->tx_data); + out_bytes--; + } + if (rx_lvl > 0 && in_bytes) { + temp = readl(®s->rx_data); + if (rxp) + *rxp++ = temp; + in_bytes--; + } + } + *dinp = rxp; + *doutp = txp; +} + +/** + * Transfer and receive data + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + * @param bitlen No of bits to tranfer or receive + * @param dout Pointer to transfer buffer + * @param din Pointer to receive buffer + * @param flags Flags for transfer begin and end + * @return zero on success else a negative value + */ +int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout, + void *din, unsigned long flags) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + int upto, todo; + int bytelen; + + /* spi core configured to do 8 bit transfers */ + if (bitlen % 8) { + debug("Non byte aligned SPI transfer.\n"); + return -1; + } + + /* Start the transaction, if necessary. */ + if ((flags & SPI_XFER_BEGIN)) + spi_cs_activate(slave); + + /* Exynos SPI limits each transfer to 65535 bytes */ + bytelen = bitlen / 8; + for (upto = 0; upto < bytelen; upto += todo) { + todo = min(bytelen - upto, (1 << 16) - 1); + spi_rx_tx(spi_slave, todo, &din, &dout); + } + + /* Stop the transaction, if necessary. */ + if ((flags & SPI_XFER_END)) + spi_cs_deactivate(slave); + + return 0; +} + +/** + * Validates the bus and chip select numbers + * + * @param bus ID of the bus that the slave is attached to + * @param cs ID of the chip select connected to the slave + * @return one on success else zero + */ +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return spi_get_bus(bus) && cs == 0; +} + +/** + * Activate the CS by driving it LOW + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +void spi_cs_activate(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + + clrbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT); + debug("Activate CS, bus %d\n", spi_slave->slave.bus); +} + +/** + * Deactivate the CS by driving it HIGH + * + * @param slave Pointer to spi_slave to which controller has to + * communicate with + */ +void spi_cs_deactivate(struct spi_slave *slave) +{ + struct exynos_spi_slave *spi_slave = to_exynos_spi(slave); + + setbits_le32(&spi_slave->regs->cs_reg, SPI_SLAVE_SIG_INACT); + debug("Deactivate CS, bus %d\n", spi_slave->slave.bus); +} + +static inline struct exynos_spi *get_spi_base(int dev_index) +{ + if (dev_index < 3) + return (struct exynos_spi *)samsung_get_base_spi() + dev_index; + else + return (struct exynos_spi *)samsung_get_base_spi_isp() + + (dev_index - 3); +} + +/* Sadly there is no error return from this function */ +void spi_init(void) +{ + int i; + struct spi_bus *bus; + + for (i = 0; i < EXYNOS5_SPI_NUM_CONTROLLERS; i++) { + bus = &spi_bus[i]; + bus->regs = get_spi_base(i); + bus->periph_id = PERIPH_ID_SPI0 + i; + + /* Although Exynos5 supports upto 50Mhz speed, + * we are setting it to 10Mhz for safe side + */ + bus->frequency = 10000000; + bus->inited = 1; + } +} diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c index 6791a7e..344d5b8 100644 --- a/drivers/spi/omap3_spi.c +++ b/drivers/spi/omap3_spi.c @@ -57,6 +57,20 @@ static void spi_reset(struct omap3_spi_slave *ds) writel(OMAP3_MCSPI_WAKEUPENABLE_WKEN, &ds->regs->wakeupenable); } +static void omap3_spi_write_chconf(struct omap3_spi_slave *ds, int val) +{ + writel(val, &ds->regs->channel[ds->slave.cs].chconf); + /* Flash post writes to make immediate effect */ + readl(&ds->regs->channel[ds->slave.cs].chconf); +} + +static void omap3_spi_set_enable(struct omap3_spi_slave *ds, int enable) +{ + writel(enable, &ds->regs->channel[ds->slave.cs].chctrl); + /* Flash post writes to make immediate effect */ + readl(&ds->regs->channel[ds->slave.cs].chctrl); +} + void spi_init() { /* do nothing */ @@ -212,7 +226,7 @@ int spi_claim_bus(struct spi_slave *slave) /* Transmit & receive mode */ conf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; - writel(conf, &ds->regs->channel[ds->slave.cs].chconf); + omap3_spi_write_chconf(ds,conf); return 0; } @@ -233,14 +247,13 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp, int timeout = SPI_WAIT_TIMEOUT; int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf); - if (flags & SPI_XFER_BEGIN) - writel(OMAP3_MCSPI_CHCTRL_EN, - &ds->regs->channel[ds->slave.cs].chctrl); + /* Enable the channel */ + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN); chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; chconf |= OMAP3_MCSPI_CHCONF_TRM_TX_ONLY; chconf |= OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); + omap3_spi_write_chconf(ds,chconf); for (i = 0; i < len; i++) { /* wait till TX register is empty (TXS == 1) */ @@ -256,15 +269,17 @@ int omap3_spi_write(struct spi_slave *slave, unsigned int len, const u8 *txp, writel(txp[i], &ds->regs->channel[ds->slave.cs].tx); } + /* wait to finish of transfer */ + while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) & + OMAP3_MCSPI_CHSTAT_EOT)); + + /* Disable the channel otherwise the next immediate RX will get affected */ + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS); + if (flags & SPI_XFER_END) { - /* wait to finish of transfer */ - while (!(readl(&ds->regs->channel[ds->slave.cs].chstat) & - OMAP3_MCSPI_CHSTAT_EOT)); chconf &= ~OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); - - writel(0, &ds->regs->channel[ds->slave.cs].chctrl); + omap3_spi_write_chconf(ds,chconf); } return 0; } @@ -277,14 +292,13 @@ int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp, int timeout = SPI_WAIT_TIMEOUT; int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf); - if (flags & SPI_XFER_BEGIN) - writel(OMAP3_MCSPI_CHCTRL_EN, - &ds->regs->channel[ds->slave.cs].chctrl); + /* Enable the channel */ + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN); chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; chconf |= OMAP3_MCSPI_CHCONF_TRM_RX_ONLY; chconf |= OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); + omap3_spi_write_chconf(ds,chconf); writel(0, &ds->regs->channel[ds->slave.cs].tx); @@ -298,15 +312,18 @@ int omap3_spi_read(struct spi_slave *slave, unsigned int len, u8 *rxp, return -1; } } + + /* Disable the channel to prevent furher receiving */ + if(i == (len - 1)) + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS); + /* Read the data */ rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx); } if (flags & SPI_XFER_END) { chconf &= ~OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); - - writel(0, &ds->regs->channel[ds->slave.cs].chctrl); + omap3_spi_write_chconf(ds,chconf); } return 0; @@ -323,14 +340,12 @@ int omap3_spi_txrx(struct spi_slave *slave, int i=0; /*Enable SPI channel*/ - if (flags & SPI_XFER_BEGIN) - writel(OMAP3_MCSPI_CHCTRL_EN, - &ds->regs->channel[ds->slave.cs].chctrl); + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN); /*set TRANSMIT-RECEIVE Mode*/ chconf &= ~OMAP3_MCSPI_CHCONF_TRM_MASK; chconf |= OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); + omap3_spi_write_chconf(ds,chconf); /*Shift in and out 1 byte at time*/ for (i=0; i < len; i++){ @@ -359,13 +374,13 @@ int omap3_spi_txrx(struct spi_slave *slave, /* Read the data */ rxp[i] = readl(&ds->regs->channel[ds->slave.cs].rx); } + /* Disable the channel */ + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS); /*if transfer must be terminated disable the channel*/ if (flags & SPI_XFER_END) { chconf &= ~OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, &ds->regs->channel[ds->slave.cs].chconf); - - writel(0, &ds->regs->channel[ds->slave.cs].chctrl); + omap3_spi_write_chconf(ds,chconf); } return 0; @@ -389,17 +404,14 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, int chconf = readl(&ds->regs->channel[ds->slave.cs].chconf); if (flags & SPI_XFER_BEGIN) { - writel(OMAP3_MCSPI_CHCTRL_EN, - &ds->regs->channel[ds->slave.cs].chctrl); + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_EN); chconf |= OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, - &ds->regs->channel[ds->slave.cs].chconf); + omap3_spi_write_chconf(ds,chconf); } if (flags & SPI_XFER_END) { chconf &= ~OMAP3_MCSPI_CHCONF_FORCE; - writel(chconf, - &ds->regs->channel[ds->slave.cs].chconf); - writel(0, &ds->regs->channel[ds->slave.cs].chctrl); + omap3_spi_write_chconf(ds,chconf); + omap3_spi_set_enable(ds,OMAP3_MCSPI_CHCTRL_DIS); } ret = 0; } else { diff --git a/drivers/spi/omap3_spi.h b/drivers/spi/omap3_spi.h index bffa43c..5e00208 100644 --- a/drivers/spi/omap3_spi.h +++ b/drivers/spi/omap3_spi.h @@ -99,6 +99,7 @@ struct mcspi { #define OMAP3_MCSPI_CHSTAT_EOT (1 << 2) #define OMAP3_MCSPI_CHCTRL_EN (1 << 0) +#define OMAP3_MCSPI_CHCTRL_DIS (0 << 0) #define OMAP3_MCSPI_WAKEUPENABLE_WKEN (1 << 0) diff --git a/drivers/video/Makefile b/drivers/video/Makefile index cc3022a..170a358 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -37,6 +37,7 @@ COBJS-$(CONFIG_EXYNOS_PWM_BL) += exynos_pwm_bl.o COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o COBJS-$(CONFIG_S6E8AX0) += s6e8ax0.o COBJS-$(CONFIG_S6E63D6) += s6e63d6.o +COBJS-$(CONFIG_LD9040) += ld9040.o COBJS-$(CONFIG_SED156X) += sed156x.o COBJS-$(CONFIG_VIDEO_AMBA) += amba.o COBJS-$(CONFIG_VIDEO_COREBOOT) += coreboot_fb.o @@ -50,6 +51,7 @@ COBJS-$(CONFIG_VIDEO_OMAP3) += omap3_dss.o COBJS-$(CONFIG_VIDEO_SED13806) += sed13806.o COBJS-$(CONFIG_VIDEO_SM501) += sm501.o COBJS-$(CONFIG_VIDEO_SMI_LYNXEM) += smiLynxEM.o videomodes.o +COBJS-$(CONFIG_VIDEO_TEGRA) += tegra.o COBJS-$(CONFIG_VIDEO_VCXK) += bus_vcxk.o COBJS := $(sort $(COBJS-y)) diff --git a/drivers/video/exynos_fb.c b/drivers/video/exynos_fb.c index e31a0fd..d9a3f9a 100644 --- a/drivers/video/exynos_fb.c +++ b/drivers/video/exynos_fb.c @@ -70,8 +70,19 @@ static void draw_logo(void) int x, y; ulong addr; - x = ((panel_width - panel_info.logo_width) >> 1); - y = ((panel_height - panel_info.logo_height) >> 1) - 4; + if (panel_width >= panel_info.logo_width) { + x = ((panel_width - panel_info.logo_width) >> 1); + } else { + x = 0; + printf("Warning: image width is bigger than display width\n"); + } + + if (panel_height >= panel_info.logo_height) { + y = ((panel_height - panel_info.logo_height) >> 1) - 4; + } else { + y = 0; + printf("Warning: image height is bigger than display height\n"); + } addr = panel_info.logo_addr; bmp_display(addr, x, y); diff --git a/drivers/video/ld9040.c b/drivers/video/ld9040.c new file mode 100644 index 0000000..c01ae12 --- /dev/null +++ b/drivers/video/ld9040.c @@ -0,0 +1,144 @@ +/* + * ld9040 AMOLED LCD panel driver. + * + * Copyright (C) 2012 Samsung Electronics + * Donghwa Lee <dh09.lee@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <spi.h> + +static const unsigned char SEQ_SWRESET[] = { + 0x01, +}; + +static const unsigned char SEQ_USER_SETTING[] = { + 0xF0, 0x5A, 0x5A +}; + +static const unsigned char SEQ_ELVSS_ON[] = { + 0xB1, 0x0D, 0x00, 0x16, +}; + +static const unsigned char SEQ_TEMP_SWIRE[] = { + 0xB2, 0x06, 0x06, 0x06, 0x06, +}; + +static const unsigned char SEQ_GTCON[] = { + 0xF7, 0x09, 0x00, 0x00, +}; + +static const unsigned char SEQ_PANEL_CONDITION[] = { + 0xF8, 0x05, 0x65, 0x96, 0x71, 0x7D, 0x19, 0x3B, + 0x0D, 0x19, 0x7E, 0x0D, 0xE2, 0x00, 0x00, 0x7E, + 0x7D, 0x07, 0x07, 0x20, 0x20, 0x20, 0x02, 0x02, +}; + +static const unsigned char SEQ_GAMMA_SET1[] = { + 0xF9, 0x00, 0xA7, 0xB4, 0xAE, 0xBF, 0x00, 0x91, + 0x00, 0xB2, 0xB4, 0xAA, 0xBB, 0x00, 0xAC, 0x00, + 0xB3, 0xB1, 0xAA, 0xBC, 0x00, 0xB3, +}; + +static const unsigned char SEQ_GAMMA_CTRL[] = { + 0xFB, 0x02, 0x5A, +}; + +static const unsigned char SEQ_APON[] = { + 0xF3, 0x00, 0x00, 0x00, 0x0A, 0x02, +}; + +static const unsigned char SEQ_DISPCTL[] = { + 0xF2, 0x02, 0x08, 0x08, 0x10, 0x10, +}; + +static const unsigned char SEQ_MANPWR[] = { + 0xB0, 0x04, +}; + +static const unsigned char SEQ_PWR_CTRL[] = { + 0xF4, 0x0A, 0x87, 0x25, 0x6A, 0x44, 0x02, 0x88, +}; + +static const unsigned char SEQ_SLPOUT[] = { + 0x11, +}; + +static const unsigned char SEQ_SLPIN[] = { + 0x10, +}; + +static const unsigned char SEQ_DISPON[] = { + 0x29, +}; + +static const unsigned char SEQ_DISPOFF[] = { + 0x28, +}; + +static void ld9040_spi_write(const unsigned char *wbuf, unsigned int size_cmd) +{ + int i = 0; + + /* + * Data are transmitted in 9-bit words: + * the first bit is command/parameter, the other are the value. + * The value's LSB is shifted to MSB position, to be sent as 9th bit + */ + + unsigned int data_out = 0, data_in = 0; + for (i = 0; i < size_cmd; i++) { + data_out = wbuf[i] >> 1; + if (i != 0) + data_out += 0x0080; + if (wbuf[i] & 0x01) + data_out += 0x8000; + spi_xfer(NULL, 9, &data_out, &data_in, SPI_XFER_BEGIN); + } +} + +void ld9040_cfg_ldo(void) +{ + udelay(10); + + ld9040_spi_write(SEQ_USER_SETTING, + ARRAY_SIZE(SEQ_USER_SETTING)); + ld9040_spi_write(SEQ_PANEL_CONDITION, + ARRAY_SIZE(SEQ_PANEL_CONDITION)); + ld9040_spi_write(SEQ_DISPCTL, ARRAY_SIZE(SEQ_DISPCTL)); + ld9040_spi_write(SEQ_MANPWR, ARRAY_SIZE(SEQ_MANPWR)); + ld9040_spi_write(SEQ_PWR_CTRL, ARRAY_SIZE(SEQ_PWR_CTRL)); + ld9040_spi_write(SEQ_ELVSS_ON, ARRAY_SIZE(SEQ_ELVSS_ON)); + ld9040_spi_write(SEQ_GTCON, ARRAY_SIZE(SEQ_GTCON)); + ld9040_spi_write(SEQ_GAMMA_SET1, ARRAY_SIZE(SEQ_GAMMA_SET1)); + ld9040_spi_write(SEQ_GAMMA_CTRL, ARRAY_SIZE(SEQ_GAMMA_CTRL)); + ld9040_spi_write(SEQ_SLPOUT, ARRAY_SIZE(SEQ_SLPOUT)); + + udelay(120); +} + +void ld9040_enable_ldo(unsigned int onoff) +{ + if (onoff) + ld9040_spi_write(SEQ_DISPON, ARRAY_SIZE(SEQ_DISPON)); + else + ld9040_spi_write(SEQ_DISPOFF, ARRAY_SIZE(SEQ_DISPOFF)); +} diff --git a/drivers/video/tegra.c b/drivers/video/tegra.c new file mode 100644 index 0000000..750a283 --- /dev/null +++ b/drivers/video/tegra.c @@ -0,0 +1,379 @@ +/* + * Copyright (c) 2011 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <fdtdec.h> +#include <lcd.h> + +#include <asm/system.h> +#include <asm/gpio.h> + +#include <asm/arch/clock.h> +#include <asm/arch/funcmux.h> +#include <asm/arch/pinmux.h> +#include <asm/arch/pwm.h> +#include <asm/arch/display.h> +#include <asm/arch-tegra/timer.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* These are the stages we go throuh in enabling the LCD */ +enum stage_t { + STAGE_START, + STAGE_PANEL_VDD, + STAGE_LVDS, + STAGE_BACKLIGHT_VDD, + STAGE_PWM, + STAGE_BACKLIGHT_EN, + STAGE_DONE, +}; + +static enum stage_t stage; /* Current stage we are at */ +static unsigned long timer_next; /* Time we can move onto next stage */ + +/* Our LCD config, set up in handle_stage() */ +static struct fdt_panel_config config; +struct fdt_disp_config *disp_config; /* Display controller config */ + +enum { + /* Maximum LCD size we support */ + LCD_MAX_WIDTH = 1366, + LCD_MAX_HEIGHT = 768, + LCD_MAX_LOG2_BPP = 4, /* 2^4 = 16 bpp */ +}; + +int lcd_line_length; +int lcd_color_fg; +int lcd_color_bg; + +void *lcd_base; /* Start of framebuffer memory */ +void *lcd_console_address; /* Start of console buffer */ + +short console_col; +short console_row; + +vidinfo_t panel_info = { + /* Insert a value here so that we don't end up in the BSS */ + .vl_col = -1, +}; + +char lcd_cursor_enabled; + +ushort lcd_cursor_width; +ushort lcd_cursor_height; + +#ifndef CONFIG_OF_CONTROL +#error "You must enable CONFIG_OF_CONTROL to get Tegra LCD support" +#endif + +void lcd_cursor_size(ushort width, ushort height) +{ + lcd_cursor_width = width; + lcd_cursor_height = height; +} + +void lcd_toggle_cursor(void) +{ + ushort x, y; + uchar *dest; + ushort row; + + x = console_col * lcd_cursor_width; + y = console_row * lcd_cursor_height; + dest = (uchar *)(lcd_base + y * lcd_line_length + x * (1 << LCD_BPP) / + 8); + + for (row = 0; row < lcd_cursor_height; ++row, dest += lcd_line_length) { + ushort *d = (ushort *)dest; + ushort color; + int i; + + for (i = 0; i < lcd_cursor_width; ++i) { + color = *d; + color ^= lcd_color_fg; + *d = color; + ++d; + } + } +} + +void lcd_cursor_on(void) +{ + lcd_cursor_enabled = 1; + lcd_toggle_cursor(); +} +void lcd_cursor_off(void) +{ + lcd_cursor_enabled = 0; + lcd_toggle_cursor(); +} + +char lcd_is_cursor_enabled(void) +{ + return lcd_cursor_enabled; +} + +static void update_panel_size(struct fdt_disp_config *config) +{ + panel_info.vl_col = config->width; + panel_info.vl_row = config->height; + panel_info.vl_bpix = config->log2_bpp; +} + +/* + * Main init function called by lcd driver. + * Inits and then prints test pattern if required. + */ + +void lcd_ctrl_init(void *lcdbase) +{ + int line_length, size; + int type = DCACHE_OFF; + + assert(disp_config); + + lcd_base = (void *)disp_config->frame_buffer; + + /* Make sure that we can acommodate the selected LCD */ + assert(disp_config->width <= LCD_MAX_WIDTH); + assert(disp_config->height <= LCD_MAX_HEIGHT); + assert(disp_config->log2_bpp <= LCD_MAX_LOG2_BPP); + if (disp_config->width <= LCD_MAX_WIDTH + && disp_config->height <= LCD_MAX_HEIGHT + && disp_config->log2_bpp <= LCD_MAX_LOG2_BPP) + update_panel_size(disp_config); + size = lcd_get_size(&line_length); + + /* Set up the LCD caching as requested */ + if (config.cache_type & FDT_LCD_CACHE_WRITE_THROUGH) + type = DCACHE_WRITETHROUGH; + else if (config.cache_type & FDT_LCD_CACHE_WRITE_BACK) + type = DCACHE_WRITEBACK; + mmu_set_region_dcache_behaviour(disp_config->frame_buffer, size, type); + + /* Enable flushing after LCD writes if requested */ + lcd_set_flush_dcache(config.cache_type & FDT_LCD_CACHE_FLUSH); + + debug("LCD frame buffer at %p\n", lcd_base); +} + +ulong calc_fbsize(void) +{ + return (panel_info.vl_col * panel_info.vl_row * + NBITS(panel_info.vl_bpix)) / 8; +} + +void lcd_setcolreg(ushort regno, ushort red, ushort green, ushort blue) +{ +} + +void tegra_lcd_early_init(const void *blob) +{ + /* + * Go with the maximum size for now. We will fix this up after + * relocation. These values are only used for memory alocation. + */ + panel_info.vl_col = LCD_MAX_WIDTH; + panel_info.vl_row = LCD_MAX_HEIGHT; + panel_info.vl_bpix = LCD_MAX_LOG2_BPP; +} + +/** + * Decode the panel information from the fdt. + * + * @param blob fdt blob + * @param config structure to store fdt config into + * @return 0 if ok, -ve on error + */ +static int fdt_decode_lcd(const void *blob, struct fdt_panel_config *config) +{ + int display_node; + + disp_config = tegra_display_get_config(); + if (!disp_config) { + debug("%s: Display controller is not configured\n", __func__); + return -1; + } + display_node = disp_config->panel_node; + if (display_node < 0) { + debug("%s: No panel configuration available\n", __func__); + return -1; + } + + config->pwm_channel = pwm_request(blob, display_node, "nvidia,pwm"); + if (config->pwm_channel < 0) { + debug("%s: Unable to request PWM channel\n", __func__); + return -1; + } + + config->cache_type = fdtdec_get_int(blob, display_node, + "nvidia,cache-type", + FDT_LCD_CACHE_WRITE_BACK_FLUSH); + + /* These GPIOs are all optional */ + fdtdec_decode_gpio(blob, display_node, "nvidia,backlight-enable-gpios", + &config->backlight_en); + fdtdec_decode_gpio(blob, display_node, "nvidia,lvds-shutdown-gpios", + &config->lvds_shutdown); + fdtdec_decode_gpio(blob, display_node, "nvidia,backlight-vdd-gpios", + &config->backlight_vdd); + fdtdec_decode_gpio(blob, display_node, "nvidia,panel-vdd-gpios", + &config->panel_vdd); + + return fdtdec_get_int_array(blob, display_node, "nvidia,panel-timings", + config->panel_timings, FDT_LCD_TIMINGS); +} + +/** + * Handle the next stage of device init + */ +static int handle_stage(const void *blob) +{ + debug("%s: stage %d\n", __func__, stage); + + /* do the things for this stage */ + switch (stage) { + case STAGE_START: + /* Initialize the Tegra display controller */ + if (tegra_display_probe(gd->fdt_blob, (void *)gd->fb_base)) { + printf("%s: Failed to probe display driver\n", + __func__); + return -1; + } + + /* get panel details */ + if (fdt_decode_lcd(blob, &config)) { + printf("No valid LCD information in device tree\n"); + return -1; + } + + /* + * It is possible that the FDT has requested that the LCD be + * disabled. We currently don't support this. It would require + * changes to U-Boot LCD subsystem to have LCD support + * compiled in but not used. An easier option might be to + * still have a frame buffer, but leave the backlight off and + * remove all mention of lcd in the stdout environment + * variable. + */ + + funcmux_select(PERIPH_ID_DISP1, FUNCMUX_DEFAULT); + + fdtdec_setup_gpio(&config.panel_vdd); + fdtdec_setup_gpio(&config.lvds_shutdown); + fdtdec_setup_gpio(&config.backlight_vdd); + fdtdec_setup_gpio(&config.backlight_en); + + /* + * TODO: If fdt includes output flag we can omit this code + * since fdtdec_setup_gpio will do it for us. + */ + if (fdt_gpio_isvalid(&config.panel_vdd)) + gpio_direction_output(config.panel_vdd.gpio, 0); + if (fdt_gpio_isvalid(&config.lvds_shutdown)) + gpio_direction_output(config.lvds_shutdown.gpio, 0); + if (fdt_gpio_isvalid(&config.backlight_vdd)) + gpio_direction_output(config.backlight_vdd.gpio, 0); + if (fdt_gpio_isvalid(&config.backlight_en)) + gpio_direction_output(config.backlight_en.gpio, 0); + break; + case STAGE_PANEL_VDD: + if (fdt_gpio_isvalid(&config.panel_vdd)) + gpio_direction_output(config.panel_vdd.gpio, 1); + break; + case STAGE_LVDS: + if (fdt_gpio_isvalid(&config.lvds_shutdown)) + gpio_set_value(config.lvds_shutdown.gpio, 1); + break; + case STAGE_BACKLIGHT_VDD: + if (fdt_gpio_isvalid(&config.backlight_vdd)) + gpio_set_value(config.backlight_vdd.gpio, 1); + break; + case STAGE_PWM: + /* Enable PWM at 15/16 high, 32768 Hz with divider 1 */ + pinmux_set_func(PINGRP_GPU, PMUX_FUNC_PWM); + pinmux_tristate_disable(PINGRP_GPU); + + pwm_enable(config.pwm_channel, 32768, 0xdf, 1); + break; + case STAGE_BACKLIGHT_EN: + if (fdt_gpio_isvalid(&config.backlight_en)) + gpio_set_value(config.backlight_en.gpio, 1); + break; + case STAGE_DONE: + break; + } + + /* set up timer for next stage */ + timer_next = timer_get_us(); + if (stage < FDT_LCD_TIMINGS) + timer_next += config.panel_timings[stage] * 1000; + + /* move to next stage */ + stage++; + return 0; +} + +int tegra_lcd_check_next_stage(const void *blob, int wait) +{ + if (stage == STAGE_DONE) + return 0; + + do { + /* wait if we need to */ + debug("%s: stage %d\n", __func__, stage); + if (stage != STAGE_START) { + int delay = timer_next - timer_get_us(); + + if (delay > 0) { + if (wait) + udelay(delay); + else + return 0; + } + } + + if (handle_stage(blob)) + return -1; + } while (wait && stage != STAGE_DONE); + if (stage == STAGE_DONE) + debug("%s: LCD init complete\n", __func__); + + return 0; +} + +void lcd_enable(void) +{ + /* + * Backlight and power init will be done separately in + * tegra_lcd_check_next_stage(), which should be called in + * board_late_init(). + * + * U-Boot code supports only colour depth, selected at compile time. + * The device tree setting should match this. Otherwise the display + * will not look right, and U-Boot may crash. + */ + if (disp_config->log2_bpp != LCD_BPP) { + printf("%s: Error: LCD depth configured in FDT (%d = %dbpp)" + " must match setting of LCD_BPP (%d)\n", __func__, + disp_config->log2_bpp, disp_config->bpp, LCD_BPP); + } +} diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 923acb9..bc09123 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -28,6 +28,7 @@ LIB := $(obj)libwatchdog.o COBJS-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o COBJS-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o +COBJS-$(CONFIG_S5P) += s5p_wdt.o COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/s5p-common/wdt.c b/drivers/watchdog/s5p_wdt.c index 94acc1e..94acc1e 100644 --- a/arch/arm/cpu/armv7/s5p-common/wdt.c +++ b/drivers/watchdog/s5p_wdt.c diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 23c9649..bfedbe4 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -42,10 +42,11 @@ */ /** - * Request ownership of a GPIO. + * Request a gpio. This should be called before any of the other functions + * are used on this gpio. * - * @param gpio GPIO number - * @param label Name given to the GPIO + * @param gp GPIO number + * @param label User label for this GPIO * @return 0 if ok, -1 on error */ int gpio_request(unsigned gpio, const char *label); @@ -93,14 +94,4 @@ int gpio_get_value(unsigned gpio); * @return 0 if ok, -1 on error */ int gpio_set_value(unsigned gpio, int value); - -/** - * Request a gpio. This should be called before any of the other functions - * are used on this gpio. - * - * @param gp GPIO number - * @param label User label for this GPIO - * @return 0 if ok, -1 on error - */ -int gpio_request(unsigned gpio, const char *label); #endif /* _ASM_GENERIC_GPIO_H_ */ diff --git a/include/command.h b/include/command.h index 10bc260..476e7cf 100644 --- a/include/command.h +++ b/include/command.h @@ -89,10 +89,10 @@ extern int cmd_auto_complete(const char *const prompt, char *buf, int *np, int * */ #if defined(CONFIG_CMD_MEMORY) \ - || defined(CONFIG_CMD_I2C) \ - || defined(CONFIG_CMD_ITEST) \ - || defined(CONFIG_CMD_PCI) \ - || defined(CONFIG_CMD_PORTIO) + || defined(CONFIG_CMD_I2C) \ + || defined(CONFIG_CMD_ITEST) \ + || defined(CONFIG_CMD_PCI) \ + || defined(CONFIG_CMD_PORTIO) #define CMD_DATA_SIZE extern int cmd_get_data_size(char* arg, int default_size); #endif diff --git a/include/common.h b/include/common.h index 5e3c5ee..d0bf1e8 100644 --- a/include/common.h +++ b/include/common.h @@ -340,6 +340,11 @@ int envmatch (uchar *, int); char *getenv (const char *); int getenv_f (const char *name, char *buf, unsigned len); ulong getenv_ulong(const char *name, int base, ulong default_val); +/* + * Read an environment variable as a boolean + * Return -1 if variable does not exist (default to true) + */ +int getenv_yesno(const char *var); int saveenv (void); int setenv (const char *, const char *); int setenv_ulong(const char *varname, ulong value); diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h index f434cd0..e82f642 100644 --- a/include/config_cmd_all.h +++ b/include/config_cmd_all.h @@ -40,12 +40,15 @@ #define CONFIG_CMD_FDOS /* Floppy DOS support */ #define CONFIG_CMD_FLASH /* flinfo, erase, protect */ #define CONFIG_CMD_FPGA /* FPGA configuration Support */ +#define CONFIG_CMD_GETTIME /* Get time since boot */ +#define CONFIG_CMD_HASH /* calculate hash / digest */ #define CONFIG_CMD_HWFLOW /* RTS/CTS hw flow control */ #define CONFIG_CMD_I2C /* I2C serial bus support */ #define CONFIG_CMD_IDE /* IDE harddisk support */ #define CONFIG_CMD_IMI /* iminfo */ #define CONFIG_CMD_IMLS /* List all found images */ #define CONFIG_CMD_IMMAP /* IMMR dump support */ +#define CONFIG_CMD_IO /* Access to X86 IO space */ #define CONFIG_CMD_IRQ /* irqinfo */ #define CONFIG_CMD_ITEST /* Integer (and string) test */ #define CONFIG_CMD_JFFS2 /* JFFS2 Support */ @@ -70,6 +73,7 @@ #define CONFIG_CMD_REGINFO /* Register dump */ #define CONFIG_CMD_REISER /* Reiserfs support */ #define CONFIG_CMD_RARP /* rarpboot support */ +#define CONFIG_CMD_READ /* Read data from partition */ #define CONFIG_CMD_RUN /* run command in env variable */ #define CONFIG_CMD_SAVEENV /* saveenv */ #define CONFIG_CMD_SAVES /* save S record dump */ diff --git a/include/configs/CRAYL1.h b/include/configs/CRAYL1.h index 1daec69..6bceccb 100644 --- a/include/configs/CRAYL1.h +++ b/include/configs/CRAYL1.h @@ -153,7 +153,6 @@ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* where to load what we get from TFTP */ -#define CONFIG_SYS_TFTP_LOADADDR CONFIG_SYS_LOAD_ADDR #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ #define CONFIG_SYS_DRAM_TEST 1 diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h index b98cacc..9a649ca 100644 --- a/include/configs/GEN860T.h +++ b/include/configs/GEN860T.h @@ -96,11 +96,6 @@ #define CONFIG_SYS_LOADS_BAUD_CHANGE /* - * Set default load address for tftp network downloads - */ -#define CONFIG_SYS_TFTP_LOADADDR 0x01000000 - -/* * Turn off the watchdog timer */ #undef CONFIG_WATCHDOG diff --git a/include/configs/TOP860.h b/include/configs/TOP860.h index 36921ca..4849f94 100644 --- a/include/configs/TOP860.h +++ b/include/configs/TOP860.h @@ -416,7 +416,6 @@ #define CONFIG_IPADDR 10.0.4.111 #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_TFTP_LOADADDR 0x00100000 /* * For booting Linux, the board info and command line data diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index ab9549b..72459d8 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -240,6 +240,38 @@ #define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SPL_NAND_AM33XX_BCH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ + CONFIG_SYS_NAND_PAGE_SIZE) +#define CONFIG_SYS_NAND_PAGE_SIZE 2048 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024) +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ + 10, 11, 12, 13, 14, 15, 16, 17, \ + 18, 19, 20, 21, 22, 23, 24, 25, \ + 26, 27, 28, 29, 30, 31, 32, 33, \ + 34, 35, 36, 37, 38, 39, 40, 41, \ + 42, 43, 44, 45, 46, 47, 48, 49, \ + 50, 51, 52, 53, 54, 55, 56, 57, } + +#define CONFIG_SYS_NAND_ECCSIZE 512 +#define CONFIG_SYS_NAND_ECCBYTES 14 + +#define CONFIG_SYS_NAND_ECCSTEPS 4 +#define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \ + CONFIG_SYS_NAND_ECCSTEPS) + +#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE + +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000 + /* * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM * 64 bytes before this address should be set aside for u-boot.img's @@ -299,6 +331,24 @@ #define CONFIG_NET_MULTI #define CONFIG_PHY_GIGE #define CONFIG_PHYLIB +#define CONFIG_PHY_ADDR 0 #define CONFIG_PHY_SMSC +#define CONFIG_NAND +/* NAND support */ +#ifdef CONFIG_NAND +#define CONFIG_CMD_NAND +#define CONFIG_NAND_OMAP_GPMC +#define GPMC_NAND_ECC_LP_x16_LAYOUT 1 +#define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */ + /* to access nand at */ + /* CS0 */ +#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND + devices */ +#undef CONFIG_ENV_IS_NOWHERE +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */ +#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */ +#endif + #endif /* ! __CONFIG_AM335X_EVM_H */ diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h index 568ae8e..433b447 100644 --- a/include/configs/cm_t35.h +++ b/include/configs/cm_t35.h @@ -188,6 +188,7 @@ /* Environment information */ #define CONFIG_BOOTDELAY 10 +#define CONFIG_ZERO_BOOTDELAY_CHECK #define CONFIG_EXTRA_ENV_SETTINGS \ "loadaddr=0x82000000\0" \ @@ -282,7 +283,6 @@ */ #define CONFIG_NR_DRAM_BANKS 1 /* CS1 is never populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ /*----------------------------------------------------------------------- * FLASH and environment organization diff --git a/include/configs/dig297.h b/include/configs/dig297.h index dda7582..721b91c 100644 --- a/include/configs/dig297.h +++ b/include/configs/dig297.h @@ -263,7 +263,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /*----------------------------------------------------------------------- diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h index ccfe032..5a87cc5 100644 --- a/include/configs/ep8260.h +++ b/include/configs/ep8260.h @@ -371,7 +371,6 @@ #define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */ #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */ -#define CONFIG_SYS_TFTP_LOADADDR 0x00100000 /* default load address for network file downloads */ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ diff --git a/include/configs/harmony.h b/include/configs/harmony.h index 040bfe4..8d1fd47 100644 --- a/include/configs/harmony.h +++ b/include/configs/harmony.h @@ -58,14 +58,16 @@ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* NAND support */ #define CONFIG_CMD_NAND #define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE /* Environment in NAND (which is 512M), aligned to start of last sector */ #define CONFIG_ENV_IS_IN_NAND diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h index be7937d..43dd06e 100644 --- a/include/configs/igep00x0.h +++ b/include/configs/igep00x0.h @@ -236,7 +236,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h index 36ce672..6887171 100644 --- a/include/configs/m28evk.h +++ b/include/configs/m28evk.h @@ -299,7 +299,7 @@ "if tftp ${update_nand_full_filename} ; then " \ "run update_nand_get_fcb_size ; " \ "nand scrub -y 0x0 ${filesize} ; " \ - "nand write.raw ${loadaddr} 0x0 ${update_nand_fcb} ; " \ + "nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \ "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \ "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \ "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \ diff --git a/include/configs/mcx.h b/include/configs/mcx.h index e304c99..185faa7 100644 --- a/include/configs/mcx.h +++ b/include/configs/mcx.h @@ -322,7 +322,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h index 8b89b25..cdf3e15 100644 --- a/include/configs/mx28evk.h +++ b/include/configs/mx28evk.h @@ -263,7 +263,7 @@ "if tftp ${update_nand_full_filename} ; then " \ "run update_nand_get_fcb_size ; " \ "nand scrub -y 0x0 ${filesize} ; " \ - "nand write.raw ${loadaddr} 0x0 ${update_nand_fcb} ; " \ + "nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \ "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \ "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \ "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \ diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 12d65f2..d0daa45 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -285,7 +285,7 @@ "else run userbutton_nonxm; fi;\0" \ "userbutton_xm=gpio input 4;\0" \ "userbutton_nonxm=gpio input 7;\0" -/* "run userbutton" will return 1 (false) if is pressed and 0 (false) if not */ +/* "run userbutton" will return 1 (false) if pressed and 0 (true) if not */ #define CONFIG_BOOTCOMMAND \ "mmc dev ${mmcdev}; if mmc rescan; then " \ "if run userbutton; then " \ diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h index b4d925e..fc6e782 100644 --- a/include/configs/omap3_evm.h +++ b/include/configs/omap3_evm.h @@ -95,10 +95,7 @@ #define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img" /* Partition tables */ -/* Only need DOS partition support for SPL, currently */ -#ifndef CONFIG_SPL_BUILD #define CONFIG_EFI_PARTITION -#endif #define CONFIG_DOS_PARTITION /* USB diff --git a/include/configs/omap3_mvblx.h b/include/configs/omap3_mvblx.h index 67af314..09a0b2f 100644 --- a/include/configs/omap3_mvblx.h +++ b/include/configs/omap3_mvblx.h @@ -251,7 +251,6 @@ */ #define CONFIG_NR_DRAM_BANKS 1 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 #define CONFIG_ENV_IS_NOWHERE 1 diff --git a/include/configs/omap3_pandora.h b/include/configs/omap3_pandora.h index 8a8a5d1..217f306 100644 --- a/include/configs/omap3_pandora.h +++ b/include/configs/omap3_pandora.h @@ -221,7 +221,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 #define CONFIG_SYS_TEXT_BASE 0x80008000 diff --git a/include/configs/omap3_sdp3430.h b/include/configs/omap3_sdp3430.h index 2a890c9..b02ec85 100644 --- a/include/configs/omap3_sdp3430.h +++ b/include/configs/omap3_sdp3430.h @@ -303,7 +303,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 meg */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /*--------------------------------------------------------------------------*/ diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h index e152055..ee4cbd7 100644 --- a/include/configs/omap3_zoom1.h +++ b/include/configs/omap3_zoom1.h @@ -252,7 +252,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /*----------------------------------------------------------------------- diff --git a/include/configs/omap3_zoom2.h b/include/configs/omap3_zoom2.h index d681424..a6b48a8 100644 --- a/include/configs/omap3_zoom2.h +++ b/include/configs/omap3_zoom2.h @@ -221,7 +221,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /*----------------------------------------------------------------------- diff --git a/include/configs/palmld.h b/include/configs/palmld.h index c5dd494..3f9802c 100644 --- a/include/configs/palmld.h +++ b/include/configs/palmld.h @@ -28,6 +28,9 @@ #define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ #define CONFIG_PALMLD 1 /* Palm LifeDrive board */ +/* we will never enable dcache, because we have to setup MMU first */ +#define CONFIG_SYS_DCACHE_OFF + /* * Environment settings */ diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h index 9c948c5..64771e7 100644 --- a/include/configs/palmtc.h +++ b/include/configs/palmtc.h @@ -30,6 +30,9 @@ #define CONFIG_CPU_PXA25X 1 /* Intel PXA255 CPU */ #define CONFIG_PALMTC 1 /* Palm Tungsten|C board */ +/* we will never enable dcache, because we have to setup MMU first */ +#define CONFIG_SYS_DCACHE_OFF + /* * Environment settings */ diff --git a/include/configs/paz00.h b/include/configs/paz00.h index 5603de9..38c79cf 100644 --- a/include/configs/paz00.h +++ b/include/configs/paz00.h @@ -45,8 +45,11 @@ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/s5pc210_universal.h b/include/configs/s5pc210_universal.h index 894f38b..eb13bb3 100644 --- a/include/configs/s5pc210_universal.h +++ b/include/configs/s5pc210_universal.h @@ -34,6 +34,7 @@ #define CONFIG_S5P 1 /* which is in a S5P Family */ #define CONFIG_EXYNOS4210 1 /* which is in a EXYNOS4210 */ #define CONFIG_UNIVERSAL 1 /* working with Universal */ +#define CONFIG_TIZEN 1 /* TIZEN lib */ #include <asm/arch/cpu.h> /* get chip and board defs */ @@ -56,6 +57,8 @@ #define CONFIG_INITRD_TAG #define CONFIG_REVISION_TAG #define CONFIG_CMDLINE_EDITING +#define CONFIG_SKIP_LOWLEVEL_INIT +#define CONFIG_BOARD_EARLY_INIT_F /* Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) @@ -261,4 +264,37 @@ #define CONFIG_USB_GADGET_S3C_UDC_OTG #define CONFIG_USB_GADGET_DUALSPEED +/* + * SPI Settings + */ +#define CONFIG_SOFT_SPI +#define CONFIG_SOFT_SPI_MODE SPI_MODE_3 +#define CONFIG_SOFT_SPI_GPIO_SCLK exynos4_gpio_part2_get_nr(y3, 1) +#define CONFIG_SOFT_SPI_GPIO_MOSI exynos4_gpio_part2_get_nr(y3, 3) +#define CONFIG_SOFT_SPI_GPIO_MISO exynos4_gpio_part2_get_nr(y3, 0) +#define CONFIG_SOFT_SPI_GPIO_CS exynos4_gpio_part2_get_nr(y4, 3) + +#define SPI_DELAY udelay(1) +#undef SPI_INIT +#define SPI_SCL(bit) universal_spi_scl(bit) +#define SPI_SDA(bit) universal_spi_sda(bit) +#define SPI_READ universal_spi_read() +#ifndef __ASSEMBLY__ +void universal_spi_scl(int bit); +void universal_spi_sda(int bit); +int universal_spi_read(void); +#endif + +/* + * LCD Settings + */ +#define CONFIG_EXYNOS_FB +#define CONFIG_LCD +#define CONFIG_CMD_BMP +#define CONFIG_BMP_32BPP +#define CONFIG_LD9040 +#define CONFIG_EXYNOS_MIPI_DSIM +#define CONFIG_VIDEO_BMP_GZIP +#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((520 * 120 * 4) + (1 << 12)) + #endif /* __CONFIG_H */ diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h index ab10bd0..de0c777 100644 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@ -54,6 +54,7 @@ #define CONFIG_MACH_TYPE MACH_TYPE_SEABOARD #define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_BOARD_LATE_INIT /* Make sure LCD init is complete */ /* I2C */ #define CONFIG_TEGRA_I2C @@ -71,8 +72,11 @@ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC @@ -102,7 +106,13 @@ /* USB keyboard */ #define CONFIG_USB_KEYBOARD -#include "tegra-common-post.h" +/* LCD support */ +#define CONFIG_LCD +#define CONFIG_PWM_TEGRA +#define CONFIG_VIDEO_TEGRA +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_CONSOLE_SCROLL_LINES 10 /* NAND support */ #define CONFIG_CMD_NAND @@ -111,6 +121,6 @@ /* Max number of NAND devices */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 -/* Somewhat oddly, the NAND base address must be a config option */ -#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE +#include "tegra-common-post.h" + #endif /* __CONFIG_H */ diff --git a/include/configs/smdk5250.h b/include/configs/smdk5250.h index c0f8622..75c25c0 100644 --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@ -65,7 +65,7 @@ #define INFORM1_OFFSET 0x804 /* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (4 << 20)) /* select serial console configuration */ #define CONFIG_SERIAL3 /* use SERIAL 3 */ @@ -163,7 +163,6 @@ #undef CONFIG_CMD_IMLS #define CONFIG_IDENT_STRING " for SMDK5250" -#define CONFIG_ENV_IS_IN_MMC #define CONFIG_SYS_MMC_ENV_DEV 0 #define CONFIG_SECURE_BL1_ONLY @@ -188,6 +187,11 @@ /* U-boot copy size from boot Media to DRAM.*/ #define BL2_START_OFFSET (CONFIG_BL2_OFFSET/512) #define BL2_SIZE_BLOC_COUNT (CONFIG_BL2_SIZE/512) + +#define OM_STAT (0x1f << 1) +#define EXYNOS_COPY_SPI_FNPTR_ADDR 0x02020058 +#define SPI_FLASH_UBOOT_POS (CONFIG_SEC_FW_SIZE + CONFIG_BL1_SIZE) + #define CONFIG_DOS_PARTITION #define CONFIG_IRAM_STACK 0x02050000 @@ -203,6 +207,59 @@ #define CONFIG_I2C_MULTI_BUS #define CONFIG_MAX_I2C_NUM 8 #define CONFIG_SYS_I2C_SLAVE 0x0 +#define CONFIG_I2C_EDID + +/* PMIC */ +#define CONFIG_PMIC +#define CONFIG_PMIC_I2C +#define CONFIG_PMIC_MAX77686 + +/* SPI */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SPI_FLASH + +#ifdef CONFIG_SPI_FLASH +#define CONFIG_EXYNOS_SPI +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 50000000 +#define EXYNOS5_SPI_NUM_CONTROLLERS 5 +#endif + +#ifdef CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_MODE SPI_MODE_0 +#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE +#define CONFIG_ENV_SPI_BUS 1 +#define CONFIG_ENV_SPI_MAX_HZ 50000000 +#endif + +/* PMIC */ +#define CONFIG_POWER +#define CONFIG_POWER_I2C +#define CONFIG_POWER_MAX77686 + +/* SPI */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SPI_FLASH + +#ifdef CONFIG_SPI_FLASH +#define CONFIG_EXYNOS_SPI +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 50000000 +#define EXYNOS5_SPI_NUM_CONTROLLERS 5 +#endif + +#ifdef CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_MODE SPI_MODE_0 +#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE +#define CONFIG_ENV_SPI_BUS 1 +#define CONFIG_ENV_SPI_MAX_HZ 50000000 +#endif /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET @@ -212,7 +269,27 @@ #define CONFIG_ENV_SROM_BANK 1 #endif /*CONFIG_CMD_NET*/ +/* Enable PXE Support */ +#ifdef CONFIG_CMD_NET +#define CONFIG_CMD_PXE +#define CONFIG_MENU +#endif + +/* Sound */ +#define CONFIG_CMD_SOUND +#ifdef CONFIG_CMD_SOUND +#define CONFIG_SOUND +#define CONFIG_I2S +#define CONFIG_SOUND_WM8994 +#endif + /* Enable devicetree support */ #define CONFIG_OF_LIBFDT +/* SHA hashing */ +#define CONFIG_CMD_HASH +#define CONFIG_HASH_VERIFY +#define CONFIG_SHA1 +#define CONFIG_SHA256 + #endif /* __CONFIG_H */ diff --git a/include/configs/tam3517-common.h b/include/configs/tam3517-common.h index ee73c27..9f1fb9f 100644 --- a/include/configs/tam3517-common.h +++ b/include/configs/tam3517-common.h @@ -189,7 +189,6 @@ */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* @@ -358,7 +357,6 @@ * I2C EEPROM */ #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__)) - /* * The I2C EEPROM on the TAM3517 contains * mac address and production data @@ -384,24 +382,29 @@ struct tam3517_module_info { unsigned char _rev[100]; }; -#define TAM3517_READ_MAC_FROM_EEPROM \ -do { \ - struct tam3517_module_info info;\ - char buf[80], ethname[20]; \ - int i; \ +#define TAM3517_READ_EEPROM(info, ret) \ +do { \ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \ if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, \ - (void *)&info, sizeof(info))) \ - break; \ + (void *)info, sizeof(*info))) \ + ret = 1; \ + else \ + ret = 0; \ +} while (0) + +#define TAM3517_READ_MAC_FROM_EEPROM(info) \ +do { \ + char buf[80], ethname[20]; \ + int i; \ memset(buf, 0, sizeof(buf)); \ - for (i = 0 ; i < ARRAY_SIZE(info.eth_addr); i++) { \ + for (i = 0 ; i < ARRAY_SIZE((info)->eth_addr); i++) { \ sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X", \ - info.eth_addr[i][5], \ - info.eth_addr[i][4], \ - info.eth_addr[i][3], \ - info.eth_addr[i][2], \ - info.eth_addr[i][1], \ - info.eth_addr[i][0]); \ + (info)->eth_addr[i][5], \ + (info)->eth_addr[i][4], \ + (info)->eth_addr[i][3], \ + (info)->eth_addr[i][2], \ + (info)->eth_addr[i][1], \ + (info)->eth_addr[i][0]); \ \ if (i) \ sprintf(ethname, "eth%daddr", i); \ @@ -411,6 +414,30 @@ do { \ setenv(ethname, buf); \ } \ } while (0) + +/* The following macros are taken from Technexion's documentation */ +#define TAM3517_sequence_number(info) \ + ((info)->sequence_number % 0x1000000000000LL) +#define TAM3517_week_of_year(info) (((info)->sequence_number >> 48) % 0x100) +#define TAM3517_year(info) ((info)->sequence_number >> 56) +#define TAM3517_revision_fixed(info) ((info)->revision % 0x100) +#define TAM3517_revision_major(info) (((info)->revision >> 8) % 0x100) +#define TAM3517_revision_tn(info) ((info)->revision >> 16) + +#define TAM3517_PRINT_SOM_INFO(info) \ +do { \ + printf("Vendor:%s\n", (info)->customer); \ + printf("SOM: %s\n", (info)->product); \ + printf("SeqNr: %02llu%02llu%012llu\n", \ + TAM3517_year(info), \ + TAM3517_week_of_year(info), \ + TAM3517_sequence_number(info)); \ + printf("Rev: TN%u %u.%u\n", \ + TAM3517_revision_tn(info), \ + TAM3517_revision_major(info), \ + TAM3517_revision_fixed(info)); \ +} while (0) + #endif #endif /* __TAM3517_H */ diff --git a/include/configs/tec.h b/include/configs/tec.h index 140d2e6..200cf66 100644 --- a/include/configs/tec.h +++ b/include/configs/tec.h @@ -54,7 +54,6 @@ #define CONFIG_CMD_NAND #define CONFIG_TEGRA_NAND #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BASE NV_PA_NAND_BASE /* Environment in NAND, aligned to start of last sector */ #define CONFIG_ENV_IS_IN_NAND diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h index 6f310be..ee40cc2 100644 --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@ -30,18 +30,6 @@ #else -#ifdef CONFIG_CMD_EXT2 -#define BOOT_FSTYPE_EXT2 "ext2 " -#else -#define BOOT_FSTYPE_EXT2 "" -#endif - -#ifdef CONFIG_CMD_FAT -#define BOOT_FSTYPE_FAT "fat" -#else -#define BOOT_FSTYPE_FAT "" -#endif - #ifdef CONFIG_CMD_MMC #define BOOTCMDS_MMC \ "mmc_boot=" \ @@ -98,7 +86,7 @@ "rootpart=1\0" \ \ "script_boot=" \ - "if ${fs}load ${devtype} ${devnum}:${rootpart} " \ + "if load ${devtype} ${devnum}:${rootpart} " \ "${scriptaddr} ${prefix}${script}; then " \ "echo ${script} found! Executing ...;" \ "source ${scriptaddr};" \ @@ -106,11 +94,9 @@ \ "scan_boot=" \ "echo Scanning ${devtype} ${devnum}...; " \ - "for fs in ${boot_fstypes}; do " \ - "for prefix in ${boot_prefixes}; do " \ - "for script in ${boot_scripts}; do " \ - "run script_boot; " \ - "done; " \ + "for prefix in ${boot_prefixes}; do " \ + "for script in ${boot_scripts}; do " \ + "run script_boot; " \ "done; " \ "done;\0" \ \ @@ -120,11 +106,6 @@ BOOT_TARGETS_DHCP " " \ "\0" \ \ - "boot_fstypes=" \ - BOOT_FSTYPE_EXT2 " " \ - BOOT_FSTYPE_FAT " " \ - "\0" \ - \ "boot_prefixes=/ /boot/\0" \ \ "boot_scripts=boot.scr.uimg boot.scr\0" \ @@ -181,8 +162,8 @@ #define TEGRA_DEVICE_SETTINGS \ "stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB "\0" \ - "stdout=serial\0" \ - "stderr=serial\0" \ + "stdout=serial,lcd\0" \ + "stderr=serial,lcd\0" \ #define CONFIG_EXTRA_ENV_SETTINGS \ TEGRA_DEVICE_SETTINGS \ @@ -226,12 +207,24 @@ #ifdef CONFIG_EFI_PARTITION #undef CONFIG_EFI_PARTITION #endif +#ifdef CONFIG_CMD_FS_GENERIC +#undef CONFIG_CMD_FS_GENERIC +#endif +#ifdef CONFIG_CMD_EXT4 +#undef CONFIG_CMD_EXT4 +#endif #ifdef CONFIG_CMD_EXT2 #undef CONFIG_CMD_EXT2 #endif #ifdef CONFIG_CMD_FAT #undef CONFIG_CMD_FAT #endif +#ifdef CONFIG_FS_EXT4 +#undef CONFIG_FS_EXT4 +#endif +#ifdef CONFIG_FS_FAT +#undef CONFIG_FS_FAT +#endif /* remove USB */ #ifdef CONFIG_USB_EHCI diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h index 5c0833a..fe07f72 100644 --- a/include/configs/tegra20-common.h +++ b/include/configs/tegra20-common.h @@ -38,6 +38,9 @@ #include <asm/arch/tegra.h> /* get chip and board defs */ +/* Align LCD to 1MB boundary */ +#define CONFIG_LCD_ALIGNMENT MMU_SECTION_SIZE + /* * Display CPU and Board information */ diff --git a/include/configs/trats.h b/include/configs/trats.h index 355029e..6efee5c 100644 --- a/include/configs/trats.h +++ b/include/configs/trats.h @@ -98,6 +98,7 @@ #undef CONFIG_CMD_MTDPARTS #define CONFIG_CMD_MMC #define CONFIG_CMD_DFU +#define CONFIG_CMD_GPT /* FAT */ #define CONFIG_CMD_FAT @@ -122,6 +123,26 @@ #define CONFIG_BOOTBLOCK "10" #define CONFIG_ENV_COMMON_BOOT "${console} ${meminfo}" +/* Tizen - partitions definitions */ +#define PARTS_CSA "csa-mmc" +#define PARTS_BOOTLOADER "u-boot" +#define PARTS_BOOT "boot" +#define PARTS_ROOT "platform" +#define PARTS_DATA "data" +#define PARTS_CSC "csc" +#define PARTS_UMS "ums" + +#define PARTS_DEFAULT \ + "uuid_disk=${uuid_gpt_disk};" \ + "name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \ + "name="PARTS_BOOTLOADER",size=60MiB," \ + "uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \ + "name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \ + "name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \ + "name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \ + "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \ + "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \ + #define CONFIG_DFU_ALT \ "dfu_alt_info=" \ "u-boot mmc 80 400;" \ @@ -171,7 +192,8 @@ "mmcbootpart=2\0" \ "mmcrootpart=3\0" \ "opts=always_resume=1\0" \ - CONFIG_DFU_ALT + "partitions=" PARTS_DEFAULT \ + CONFIG_DFU_ALT \ /* Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ @@ -189,12 +211,17 @@ #define CONFIG_SYS_HZ 1000 -/* TRATS has 2 banks of DRAM */ -#define CONFIG_NR_DRAM_BANKS 2 -#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* LDDDR2 DMC 0 */ -#define PHYS_SDRAM_1_SIZE (512 << 20) /* 512 MB in CS 0 */ -#define PHYS_SDRAM_2 0x50000000 /* LPDDR2 DMC 1 */ -#define PHYS_SDRAM_2_SIZE (512 << 20) /* 512 MB in CS 0 */ +/* TRATS has 4 banks of DRAM */ +#define CONFIG_NR_DRAM_BANKS 4 +#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE +#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) +#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */ @@ -208,6 +235,10 @@ #define CONFIG_DOS_PARTITION +/* GPT */ +#define CONFIG_EFI_PARTITION +#define CONFIG_PARTITION_UUIDS + #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_CACHELINE_SIZE 32 diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h index be0d2ec..bcb0350 100644 --- a/include/configs/tricorder.h +++ b/include/configs/tricorder.h @@ -247,7 +247,6 @@ /* Physical Memory Map */ #define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */ #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0 -#define PHYS_SDRAM_1_SIZE (128 << 20) /* at least 128 MiB */ #define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1 /* NAND and environment organization */ diff --git a/include/configs/trimslice.h b/include/configs/trimslice.h index eeb0dbe..334d3a3 100644 --- a/include/configs/trimslice.h +++ b/include/configs/trimslice.h @@ -69,8 +69,11 @@ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* Environment in SPI */ #define CONFIG_ENV_IS_IN_SPI_FLASH @@ -80,6 +83,7 @@ #define CONFIG_ENV_OFFSET (512 * 1024) /* USB Host support */ +#define CONFIG_USB_MAX_CONTROLLER_COUNT 3 #define CONFIG_USB_EHCI #define CONFIG_USB_EHCI_TEGRA #define CONFIG_USB_STORAGE diff --git a/include/configs/utx8245.h b/include/configs/utx8245.h index d203bb4..66568c8 100644 --- a/include/configs/utx8245.h +++ b/include/configs/utx8245.h @@ -65,7 +65,6 @@ #define CONFIG_BOOTARGS "root=/dev/ram console=ttyS0,57600" /* RAMdisk */ #define CONFIG_ETHADDR 00:AA:00:14:00:05 /* UTX5 */ #define CONFIG_SERVERIP 10.8.17.105 /* Spree */ -#define CONFIG_SYS_TFTP_LOADADDR 10000 #define CONFIG_EXTRA_ENV_SETTINGS \ "kernel_addr=FFA00000\0" \ diff --git a/include/configs/ventana.h b/include/configs/ventana.h index 4c9b31c..b55ebc9 100644 --- a/include/configs/ventana.h +++ b/include/configs/ventana.h @@ -52,8 +52,11 @@ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* Environment in eMMC, at the end of 2nd "boot sector" */ #define CONFIG_ENV_IS_IN_MMC diff --git a/include/configs/whistler.h b/include/configs/whistler.h index 1c7803b..1e554d8 100644 --- a/include/configs/whistler.h +++ b/include/configs/whistler.h @@ -61,8 +61,11 @@ #define CONFIG_DOS_PARTITION #define CONFIG_EFI_PARTITION +#define CONFIG_FS_EXT4 +#define CONFIG_FS_FAT #define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT +#define CONFIG_CMD_FS_GENERIC /* * Environment in eMMC, at the end of 2nd "boot sector". Note: This assumes diff --git a/include/configs/zipitz2.h b/include/configs/zipitz2.h index bf6394a..b92f70b 100644 --- a/include/configs/zipitz2.h +++ b/include/configs/zipitz2.h @@ -41,6 +41,9 @@ #define CONFIG_ENV_ADDR 0x40000 #define CONFIG_ENV_SIZE 0x20000 +/* we will never enable dcache, because we have to setup MMU first */ +#define CONFIG_SYS_DCACHE_OFF + #define CONFIG_SYS_MALLOC_LEN (128*1024) #define CONFIG_ARCH_CPU_INIT diff --git a/include/edid.h b/include/edid.h new file mode 100644 index 0000000..4788de9 --- /dev/null +++ b/include/edid.h @@ -0,0 +1,275 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * + * (C) Copyright 2010 + * Petr Stetiar <ynezz@true.cz> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + * Contains stolen code from ddcprobe project which is: + * Copyright (C) Nalin Dahyabhai <bigfun@pobox.com> + * + */ + +#ifndef __EDID_H_ +#define __EDID_H_ + +#include <linux/types.h> + +#define GET_BIT(_x, _pos) \ + (((_x) >> (_pos)) & 1) +#define GET_BITS(_x, _pos_msb, _pos_lsb) \ + (((_x) >> (_pos_lsb)) & ((1 << ((_pos_msb) - (_pos_lsb) + 1)) - 1)) + +/* Aspect ratios used in EDID info. */ +enum edid_aspect { + ASPECT_625 = 0, + ASPECT_75, + ASPECT_8, + ASPECT_5625, +}; + +/* Detailed timing information used in EDID v1.x */ +struct edid_detailed_timing { + unsigned char pixel_clock[2]; +#define EDID_DETAILED_TIMING_PIXEL_CLOCK(_x) \ + (((((uint32_t)(_x).pixel_clock[1]) << 8) + \ + (_x).pixel_clock[0]) * 10000) + unsigned char horizontal_active; + unsigned char horizontal_blanking; + unsigned char horizontal_active_blanking_hi; +#define EDID_DETAILED_TIMING_HORIZONTAL_ACTIVE(_x) \ + ((GET_BITS((_x).horizontal_active_blanking_hi, 7, 4) << 8) + \ + (_x).horizontal_active) +#define EDID_DETAILED_TIMING_HORIZONTAL_BLANKING(_x) \ + ((GET_BITS((_x).horizontal_active_blanking_hi, 3, 0) << 8) + \ + (_x).horizontal_blanking) + unsigned char vertical_active; + unsigned char vertical_blanking; + unsigned char vertical_active_blanking_hi; +#define EDID_DETAILED_TIMING_VERTICAL_ACTIVE(_x) \ + ((GET_BITS((_x).vertical_active_blanking_hi, 7, 4) << 8) + \ + (_x).vertical_active) +#define EDID_DETAILED_TIMING_VERTICAL_BLANKING(_x) \ + ((GET_BITS((_x).vertical_active_blanking_hi, 3, 0) << 8) + \ + (_x).vertical_blanking) + unsigned char hsync_offset; + unsigned char hsync_pulse_width; + unsigned char sync_offset_pulse_width; + unsigned char hsync_vsync_offset_pulse_width_hi; +#define EDID_DETAILED_TIMING_HSYNC_OFFSET(_x) \ + ((GET_BITS((_x).hsync_vsync_offset_pulse_width_hi, 7, 6) << 8) + \ + (_x).hsync_offset) +#define EDID_DETAILED_TIMING_HSYNC_PULSE_WIDTH(_x) \ + ((GET_BITS((_x).hsync_vsync_offset_pulse_width_hi, 5, 4) << 8) + \ + (_x).hsync_pulse_width) +#define EDID_DETAILED_TIMING_VSYNC_OFFSET(_x) \ + ((GET_BITS((_x).hsync_vsync_offset_pulse_width_hi, 3, 2) << 4) + \ + GET_BITS((_x).vsync_offset_pulse_width, 7, 4)) +#define EDID_DETAILED_TIMING_VSYNC_PULSE_WIDTH(_x) \ + ((GET_BITS((_x).hsync_vsync_offset_pulse_width_hi, 1, 0) << 4) + \ + GET_BITS((_x).vsync_offset_pulse_width, 3, 0)) + unsigned char himage_size; + unsigned char vimage_size; + unsigned char himage_vimage_size_hi; +#define EDID_DETAILED_TIMING_HIMAGE_SIZE(_x) \ + ((GET_BITS((_x).himage_vimage_size_hi, 7, 4) << 8) + (_x).himage_size) +#define EDID_DETAILED_TIMING_VIMAGE_SIZE(_x) \ + ((GET_BITS((_x).himage_vimage_size_hi, 3, 0) << 8) + (_x).vimage_size) + unsigned char hborder; + unsigned char vborder; + unsigned char flags; +#define EDID_DETAILED_TIMING_FLAG_INTERLACED(_x) \ + GET_BIT((_x).flags, 7) +#define EDID_DETAILED_TIMING_FLAG_STEREO(_x) \ + GET_BITS((_x).flags, 6, 5) +#define EDID_DETAILED_TIMING_FLAG_DIGITAL_COMPOSITE(_x) \ + GET_BITS((_x).flags, 4, 3) +#define EDID_DETAILED_TIMING_FLAG_POLARITY(_x) \ + GET_BITS((_x).flags, 2, 1) +#define EDID_DETAILED_TIMING_FLAG_INTERLEAVED(_x) \ + GET_BIT((_x).flags, 0) +} __attribute__ ((__packed__)); + +enum edid_monitor_descriptor_types { + EDID_MONITOR_DESCRIPTOR_SERIAL = 0xff, + EDID_MONITOR_DESCRIPTOR_ASCII = 0xfe, + EDID_MONITOR_DESCRIPTOR_RANGE = 0xfd, + EDID_MONITOR_DESCRIPTOR_NAME = 0xfc, +}; + +struct edid_monitor_descriptor { + uint16_t zero_flag_1; + unsigned char zero_flag_2; + unsigned char type; + unsigned char zero_flag_3; + union { + char string[13]; + struct { + unsigned char vertical_min; + unsigned char vertical_max; + unsigned char horizontal_min; + unsigned char horizontal_max; + unsigned char pixel_clock_max; + unsigned char gtf_data[8]; + } range_data; + } data; +} __attribute__ ((__packed__)); + +struct edid1_info { + unsigned char header[8]; + unsigned char manufacturer_name[2]; +#define EDID1_INFO_MANUFACTURER_NAME_ZERO(_x) \ + GET_BIT(((_x).manufacturer_name[0]), 7) +#define EDID1_INFO_MANUFACTURER_NAME_CHAR1(_x) \ + GET_BITS(((_x).manufacturer_name[0]), 6, 2) +#define EDID1_INFO_MANUFACTURER_NAME_CHAR2(_x) \ + ((GET_BITS(((_x).manufacturer_name[0]), 1, 0) << 3) + \ + GET_BITS(((_x).manufacturer_name[1]), 7, 5)) +#define EDID1_INFO_MANUFACTURER_NAME_CHAR3(_x) \ + GET_BITS(((_x).manufacturer_name[1]), 4, 0) + unsigned char product_code[2]; +#define EDID1_INFO_PRODUCT_CODE(_x) \ + (((uint16_t)(_x).product_code[1] << 8) + (_x).product_code[0]) + unsigned char serial_number[4]; +#define EDID1_INFO_SERIAL_NUMBER(_x) \ + (((uint32_t)(_x).serial_number[3] << 24) + \ + ((_x).serial_number[2] << 16) + ((_x).serial_number[1] << 8) + \ + (_x).serial_number[0]) + unsigned char week; + unsigned char year; + unsigned char version; + unsigned char revision; + unsigned char video_input_definition; +#define EDID1_INFO_VIDEO_INPUT_DIGITAL(_x) \ + GET_BIT(((_x).video_input_definition), 7) +#define EDID1_INFO_VIDEO_INPUT_VOLTAGE_LEVEL(_x) \ + GET_BITS(((_x).video_input_definition), 6, 5) +#define EDID1_INFO_VIDEO_INPUT_BLANK_TO_BLACK(_x) \ + GET_BIT(((_x).video_input_definition), 4) +#define EDID1_INFO_VIDEO_INPUT_SEPARATE_SYNC(_x) \ + GET_BIT(((_x).video_input_definition), 3) +#define EDID1_INFO_VIDEO_INPUT_COMPOSITE_SYNC(_x) \ + GET_BIT(((_x).video_input_definition), 2) +#define EDID1_INFO_VIDEO_INPUT_SYNC_ON_GREEN(_x) \ + GET_BIT(((_x).video_input_definition), 1) +#define EDID1_INFO_VIDEO_INPUT_SERRATION_V(_x) \ + GET_BIT(((_x).video_input_definition), 0) + unsigned char max_size_horizontal; + unsigned char max_size_vertical; + unsigned char gamma; + unsigned char feature_support; +#define EDID1_INFO_FEATURE_STANDBY(_x) \ + GET_BIT(((_x).feature_support), 7) +#define EDID1_INFO_FEATURE_SUSPEND(_x) \ + GET_BIT(((_x).feature_support), 6) +#define EDID1_INFO_FEATURE_ACTIVE_OFF(_x) \ + GET_BIT(((_x).feature_support), 5) +#define EDID1_INFO_FEATURE_DISPLAY_TYPE(_x) \ + GET_BITS(((_x).feature_support), 4, 3) +#define EDID1_INFO_FEATURE_RGB(_x) \ + GET_BIT(((_x).feature_support), 2) +#define EDID1_INFO_FEATURE_PREFERRED_TIMING_MODE(_x) \ + GET_BIT(((_x).feature_support), 1) +#define EDID1_INFO_FEATURE_DEFAULT_GTF_SUPPORT(_x) \ + GET_BIT(((_x).feature_support), 0) + unsigned char color_characteristics[10]; + unsigned char established_timings[3]; +#define EDID1_INFO_ESTABLISHED_TIMING_720X400_70(_x) \ + GET_BIT(((_x).established_timings[0]), 7) +#define EDID1_INFO_ESTABLISHED_TIMING_720X400_88(_x) \ + GET_BIT(((_x).established_timings[0]), 6) +#define EDID1_INFO_ESTABLISHED_TIMING_640X480_60(_x) \ + GET_BIT(((_x).established_timings[0]), 5) +#define EDID1_INFO_ESTABLISHED_TIMING_640X480_67(_x) \ + GET_BIT(((_x).established_timings[0]), 4) +#define EDID1_INFO_ESTABLISHED_TIMING_640X480_72(_x) \ + GET_BIT(((_x).established_timings[0]), 3) +#define EDID1_INFO_ESTABLISHED_TIMING_640X480_75(_x) \ + GET_BIT(((_x).established_timings[0]), 2) +#define EDID1_INFO_ESTABLISHED_TIMING_800X600_56(_x) \ + GET_BIT(((_x).established_timings[0]), 1) +#define EDID1_INFO_ESTABLISHED_TIMING_800X600_60(_x) \ + GET_BIT(((_x).established_timings[0]), 0) +#define EDID1_INFO_ESTABLISHED_TIMING_800X600_72(_x) \ + GET_BIT(((_x).established_timings[1]), 7) +#define EDID1_INFO_ESTABLISHED_TIMING_800X600_75(_x) \ + GET_BIT(((_x).established_timings[1]), 6) +#define EDID1_INFO_ESTABLISHED_TIMING_832X624_75(_x) \ + GET_BIT(((_x).established_timings[1]), 5) +#define EDID1_INFO_ESTABLISHED_TIMING_1024X768_87I(_x) \ + GET_BIT(((_x).established_timings[1]), 4) +#define EDID1_INFO_ESTABLISHED_TIMING_1024X768_60(_x) \ + GET_BIT(((_x).established_timings[1]), 3) +#define EDID1_INFO_ESTABLISHED_TIMING_1024X768_70(_x) \ + GET_BIT(((_x).established_timings[1]), 2) +#define EDID1_INFO_ESTABLISHED_TIMING_1024X768_75(_x) \ + GET_BIT(((_x).established_timings[1]), 1) +#define EDID1_INFO_ESTABLISHED_TIMING_1280X1024_75(_x) \ + GET_BIT(((_x).established_timings[1]), 0) +#define EDID1_INFO_ESTABLISHED_TIMING_1152X870_75(_x) \ + GET_BIT(((_x).established_timings[2]), 7) + struct { + unsigned char xresolution; + unsigned char aspect_vfreq; + } __attribute__((__packed__)) standard_timings[8]; +#define EDID1_INFO_STANDARD_TIMING_XRESOLUTION(_x, _i) \ + (((_x).standard_timings[_i]).xresolution) +#define EDID1_INFO_STANDARD_TIMING_ASPECT(_x, _i) \ + GET_BITS(((_x).standard_timings[_i].aspect_vfreq), 7, 6) +#define EDID1_INFO_STANDARD_TIMING_VFREQ(_x, _i) \ + GET_BITS(((_x).standard_timings[_i].aspect_vfreq), 5, 0) + union { + unsigned char timing[72]; + struct edid_monitor_descriptor descriptor[4]; + } monitor_details; + unsigned char extension_flag; + unsigned char checksum; +} __attribute__ ((__packed__)); + +/** + * Print the EDID info. + * + * @param edid_info The EDID info to be printed + */ +void edid_print_info(struct edid1_info *edid_info); + +/** + * Check the EDID info. + * + * @param info The EDID info to be checked + * @return 0 on valid, or -1 on invalid + */ +int edid_check_info(struct edid1_info *info); + +/** + * Get the horizontal and vertical rate ranges of the monitor. + * + * @param edid The EDID info + * @param hmin Returns the minimum horizontal rate + * @param hmax Returns the maxium horizontal rate + * @param vmin Returns the minimum vertical rate + * @param vmax Returns the maxium vertical rate + * @return 0 on success, or -1 on error + */ +int edid_get_ranges(struct edid1_info *edid, unsigned int *hmin, + unsigned int *hmax, unsigned int *vmin, + unsigned int *vmax); + +#endif /* __EDID_H_ */ diff --git a/include/env_attr.h b/include/env_attr.h new file mode 100644 index 0000000..6ef114f --- /dev/null +++ b/include/env_attr.h @@ -0,0 +1,55 @@ +/* + * (C) Copyright 2012 + * Joe Hershberger, National Instruments, joe.hershberger@ni.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ENV_ATTR_H__ +#define __ENV_ATTR_H__ + +#define ENV_ATTR_LIST_DELIM ',' +#define ENV_ATTR_SEP ':' + +/* + * env_attr_walk takes as input an "attr_list" that takes the form: + * attributes = [^,:\s]* + * entry = name[:attributes] + * list = entry[,list] + * It will call the "callback" function with the "name" and attribute as "value" + * The callback may return a non-0 to abort the list walk. + * This return value will be passed through to the caller. + * 0 is returned on success. + */ +extern int env_attr_walk(const char *attr_list, + int (*callback)(const char *name, const char *value)); + +/* + * env_attr_lookup takes as input an "attr_list" with the same form as above. + * It also takes as input a "name" to look for. + * If the name is found in the list, it's value is copied into "attributes". + * There is no protection on attributes being too small for the value. + * It returns -1 if attributes is NULL, 1 if "name" is not found, 2 if + * "attr_list" is NULL. + * Returns 0 on success. + */ +extern int env_attr_lookup(const char *attr_list, const char *name, + char *attributes); + +#endif /* __ENV_ATTR_H__ */ diff --git a/include/env_callback.h b/include/env_callback.h new file mode 100644 index 0000000..47fdc6f --- /dev/null +++ b/include/env_callback.h @@ -0,0 +1,75 @@ +/* + * (C) Copyright 2012 + * Joe Hershberger, National Instruments, joe.hershberger@ni.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ENV_CALLBACK_H__ +#define __ENV_CALLBACK_H__ + +#include <env_flags.h> +#include <linker_lists.h> +#include <search.h> + +#define ENV_CALLBACK_VAR ".callbacks" + +/* Board configs can define additional static callback bindings */ +#ifndef CONFIG_ENV_CALLBACK_LIST_STATIC +#define CONFIG_ENV_CALLBACK_LIST_STATIC +#endif + +#ifdef CONFIG_SILENT_CONSOLE +#define SILENT_CALLBACK "silent:silent," +#else +#define SILENT_CALLBACK +#endif + +/* + * This list of callback bindings is static, but may be overridden by defining + * a new association in the ".callbacks" environment variable. + */ +#define ENV_CALLBACK_LIST_STATIC ENV_CALLBACK_VAR ":callbacks," \ + ENV_FLAGS_VAR ":flags," \ + "baudrate:baudrate," \ + "bootfile:bootfile," \ + "loadaddr:loadaddr," \ + SILENT_CALLBACK \ + "stdin:console,stdout:console,stderr:console," \ + CONFIG_ENV_CALLBACK_LIST_STATIC + +struct env_clbk_tbl { + const char *name; /* Callback name */ + int (*callback)(const char *name, const char *value, enum env_op op, + int flags); +}; + +struct env_clbk_tbl *find_env_callback(const char *); +void env_callback_init(ENTRY *var_entry); + +/* + * Define a callback that can be associated with variables. + * when associated through the ".callbacks" environment variable, the callback + * will be executed any time the variable is inserted, overwritten, or deleted. + */ +#define U_BOOT_ENV_CALLBACK(name, callback) \ + ll_entry_declare(struct env_clbk_tbl, name, env_clbk, env_clbk) = \ + {#name, callback} + +#endif /* __ENV_CALLBACK_H__ */ diff --git a/include/env_default.h b/include/env_default.h index a1db73a..39c5b7c 100644 --- a/include/env_default.h +++ b/include/env_default.h @@ -24,6 +24,8 @@ * MA 02111-1307 USA */ +#include <env_callback.h> + #ifdef DEFAULT_ENV_INSTANCE_EMBEDDED env_t environment __PPCENV__ = { ENV_CRC, /* CRC Sum */ @@ -36,6 +38,12 @@ static char default_environment[] = { #else const uchar default_environment[] = { #endif +#ifdef CONFIG_ENV_CALLBACK_LIST_DEFAULT + ENV_CALLBACK_VAR "=" CONFIG_ENV_CALLBACK_LIST_DEFAULT "\0" +#endif +#ifdef CONFIG_ENV_FLAGS_LIST_DEFAULT + ENV_FLAGS_VAR "=" CONFIG_ENV_FLAGS_LIST_DEFAULT "\0" +#endif #ifdef CONFIG_BOOTARGS "bootargs=" CONFIG_BOOTARGS "\0" #endif diff --git a/include/env_flags.h b/include/env_flags.h new file mode 100644 index 0000000..d1aa144 --- /dev/null +++ b/include/env_flags.h @@ -0,0 +1,172 @@ +/* + * (C) Copyright 2012 + * Joe Hershberger, National Instruments, joe.hershberger@ni.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __ENV_FLAGS_H__ +#define __ENV_FLAGS_H__ + +enum env_flags_vartype { + env_flags_vartype_string, + env_flags_vartype_decimal, + env_flags_vartype_hex, + env_flags_vartype_bool, +#ifdef CONFIG_CMD_NET + env_flags_vartype_ipaddr, + env_flags_vartype_macaddr, +#endif + env_flags_vartype_end +}; + +enum env_flags_varaccess { + env_flags_varaccess_any, + env_flags_varaccess_readonly, + env_flags_varaccess_writeonce, + env_flags_varaccess_changedefault, + env_flags_varaccess_end +}; + +#define ENV_FLAGS_VAR ".flags" +#define ENV_FLAGS_ATTR_MAX_LEN 2 +#define ENV_FLAGS_VARTYPE_LOC 0 +#define ENV_FLAGS_VARACCESS_LOC 1 + +#ifndef CONFIG_ENV_FLAGS_LIST_STATIC +#define CONFIG_ENV_FLAGS_LIST_STATIC "" +#endif + +#ifdef CONFIG_CMD_NET +#ifdef CONFIG_ENV_OVERWRITE +#define ETHADDR_FLAGS "ethaddr:ma," +#else +#ifdef CONFIG_OVERWRITE_ETHADDR_ONCE +#define ETHADDR_FLAGS "ethaddr:mc," +#else +#define ETHADDR_FLAGS "ethaddr:mo," +#endif +#endif +#else +#define ETHADDR_FLAGS "" +#endif + +#ifndef CONFIG_ENV_OVERWRITE +#define SERIAL_FLAGS "serial#:so," +#else +#define SERIAL_FLAGS "" +#endif + +#define ENV_FLAGS_LIST_STATIC \ + ETHADDR_FLAGS \ + SERIAL_FLAGS \ + CONFIG_ENV_FLAGS_LIST_STATIC + +#ifdef CONFIG_CMD_ENV_FLAGS +/* + * Print the whole list of available type flags. + */ +void env_flags_print_vartypes(void); +/* + * Print the whole list of available access flags. + */ +void env_flags_print_varaccess(void); +/* + * Return the name of the type. + */ +const char *env_flags_get_vartype_name(enum env_flags_vartype type); +/* + * Return the name of the access. + */ +const char *env_flags_get_varaccess_name(enum env_flags_varaccess access); +#endif + +/* + * Parse the flags string from a .flags attribute list into the vartype enum. + */ +enum env_flags_vartype env_flags_parse_vartype(const char *flags); +/* + * Parse the flags string from a .flags attribute list into the varaccess enum. + */ +enum env_flags_varaccess env_flags_parse_varaccess(const char *flags); +/* + * Parse the binary flags from a hash table entry into the varaccess enum. + */ +enum env_flags_varaccess env_flags_parse_varaccess_from_binflags(int binflags); + +#ifdef USE_HOSTCC +/* + * Look up the type of a variable directly from the .flags var. + */ +enum env_flags_vartype env_flags_get_type(const char *name); +/* + * Look up the access of a variable directly from the .flags var. + */ +enum env_flags_varaccess env_flags_get_access(const char *name); +/* + * Validate the newval for its type to conform with the requirements defined by + * its flags (directly looked at the .flags var). + */ +int env_flags_validate_type(const char *name, const char *newval); +/* + * Validate the newval for its access to conform with the requirements defined + * by its flags (directly looked at the .flags var). + */ +int env_flags_validate_access(const char *name, int check_mask); +/* + * Validate that the proposed access to variable "name" is valid according to + * the defined flags for that variable, if any. + */ +int env_flags_validate_varaccess(const char *name, int check_mask); +/* + * Validate the parameters passed to "env set" for type compliance + */ +int env_flags_validate_env_set_params(int argc, char * const argv[]); + +#else /* !USE_HOSTCC */ + +#include <search.h> + +/* + * When adding a variable to the environment, initialize the flags for that + * variable. + */ +void env_flags_init(ENTRY *var_entry); + +/* + * Validate the newval for to conform with the requirements defined by its flags + */ +int env_flags_validate(const ENTRY *item, const char *newval, enum env_op op, + int flag); + +#endif /* USE_HOSTCC */ + +/* + * These are the binary flags used in the environment entry->flags variable to + * decribe properties of veriables in the table + */ +#define ENV_FLAGS_VARTYPE_BIN_MASK 0x00000007 +/* The actual variable type values use the enum value (within the mask) */ +#define ENV_FLAGS_VARACCESS_PREVENT_DELETE 0x00000008 +#define ENV_FLAGS_VARACCESS_PREVENT_CREATE 0x00000010 +#define ENV_FLAGS_VARACCESS_PREVENT_OVERWR 0x00000020 +#define ENV_FLAGS_VARACCESS_PREVENT_NONDEF_OVERWR 0x00000040 +#define ENV_FLAGS_VARACCESS_BIN_MASK 0x00000078 + +#endif /* __ENV_FLAGS_H__ */ diff --git a/include/environment.h b/include/environment.h index e8ab703..e64b43d 100644 --- a/include/environment.h +++ b/include/environment.h @@ -164,6 +164,9 @@ extern void env_reloc(void); #ifndef DO_DEPS_ONLY +#include <env_attr.h> +#include <env_callback.h> +#include <env_flags.h> #include <search.h> extern struct hsearch_data env_htab; @@ -178,6 +181,9 @@ unsigned char env_get_char_memory(int index); /* Function that updates CRC of the enironment */ void env_crc_update(void); +/* Look up the variable from the default environment */ +char *getenv_default(const char *name); + /* [re]set to the default environment */ void set_default_env(const char *s); @@ -187,15 +193,6 @@ int set_default_vars(int nvars, char * const vars[]); /* Import from binary representation into hash table */ int env_import(const char *buf, int check); -/* - * Check if variable "name" can be changed from oldval to newval, - * and if so, apply the changes (e.g. baudrate). - * When (flag & H_FORCE) is set, it does not print out any error - * message and forces overwriting of write-once variables. - */ -int env_check_apply(const char *name, const char *oldval, - const char *newval, int flag); - #endif /* DO_DEPS_ONLY */ #endif /* _ENVIRONMENT_H_ */ diff --git a/include/exports.h b/include/exports.h index 63aa4b2..6cf31aa 100644 --- a/include/exports.h +++ b/include/exports.h @@ -23,7 +23,7 @@ char *getenv (const char *name); int setenv (const char *varname, const char *varvalue); long simple_strtol(const char *cp,char **endp,unsigned int base); int strcmp(const char * cs,const char * ct); -int ustrtoul(const char *cp, char **endp, unsigned int base); +unsigned long ustrtoul(const char *cp, char **endp, unsigned int base); #if defined(CONFIG_CMD_I2C) int i2c_write (uchar, uint, int , uchar* , int); int i2c_read (uchar, uint, int , uchar* , int); diff --git a/include/fdtdec.h b/include/fdtdec.h index 5164ce2..70d0e97 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -68,6 +68,8 @@ enum fdt_compat_id { COMPAT_NVIDIA_TEGRA20_EMC_TABLE, /* Tegra20 memory timing table */ COMPAT_NVIDIA_TEGRA20_KBC, /* Tegra20 Keyboard */ COMPAT_NVIDIA_TEGRA20_NAND, /* Tegra2 NAND controller */ + COMPAT_NVIDIA_TEGRA20_PWM, /* Tegra 2 PWM controller */ + COMPAT_NVIDIA_TEGRA20_DC, /* Tegra 2 Display controller */ COMPAT_COUNT, }; diff --git a/include/hash.h b/include/hash.h new file mode 100644 index 0000000..34ba558 --- /dev/null +++ b/include/hash.h @@ -0,0 +1,69 @@ +/* + * Copyright (c) 2012 The Chromium OS Authors. + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _HASH_H +#define _HASH_H + +#ifdef CONFIG_SHA1SUM_VERIFY +#define CONFIG_HASH_VERIFY +#endif + +struct hash_algo { + const char *name; /* Name of algorithm */ + int digest_size; /* Length of digest */ + /** + * hash_func_ws: Generic hashing function + * + * This is the generic prototype for a hashing function. We only + * have the watchdog version at present. + * + * @input: Input buffer + * @ilen: Input buffer length + * @output: Checksum result (length depends on algorithm) + * @chunk_sz: Trigger watchdog after processing this many bytes + */ + void (*hash_func_ws)(const unsigned char *input, unsigned int ilen, + unsigned char *output, unsigned int chunk_sz); + int chunk_size; /* Watchdog chunk size */ +}; + +/* + * Maximum digest size for all algorithms we support. Having this value + * avoids a malloc() or C99 local declaration in common/cmd_hash.c. + */ +#define HASH_MAX_DIGEST_SIZE 32 + +/** + * hash_command: Process a hash command for a particular algorithm + * + * This common function is used to implement specific hash commands. + * + * @algo_name: Hash algorithm being used + * @verify: Non-zero to enable verify mode + * @cmdtp: Pointer to command table entry + * @flag: Some flags normally 0 (see CMD_FLAG_.. above) + * @argc: Number of arguments (arg 0 must be the command text) + * @argv: Arguments + */ +int hash_command(const char *algo_name, int verify, cmd_tbl_t *cmdtp, int flag, + int argc, char * const argv[]); + +#endif diff --git a/include/i2s.h b/include/i2s.h new file mode 100644 index 0000000..75ae75c --- /dev/null +++ b/include/i2s.h @@ -0,0 +1,127 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar <rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __I2S_H__ +#define __I2S_H__ + +/* + * DAI hardware audio formats. + * + * Describes the physical PCM data formating and clocking. Add new formats + * to the end. + */ +#define SND_SOC_DAIFMT_I2S 1 /* I2S mode */ +#define SND_SOC_DAIFMT_RIGHT_J 2 /* Right Justified mode */ +#define SND_SOC_DAIFMT_LEFT_J 3 /* Left Justified mode */ +#define SND_SOC_DAIFMT_DSP_A 4 /* L data MSB after FRM LRC */ +#define SND_SOC_DAIFMT_DSP_B 5 /* L data MSB during FRM LRC */ +#define SND_SOC_DAIFMT_AC97 6 /* AC97 */ +#define SND_SOC_DAIFMT_PDM 7 /* Pulse density modulation */ + +/* left and right justified also known as MSB and LSB respectively */ +#define SND_SOC_DAIFMT_MSB SND_SOC_DAIFMT_LEFT_J +#define SND_SOC_DAIFMT_LSB SND_SOC_DAIFMT_RIGHT_J + +/* + * DAI hardware signal inversions. + * + * Specifies whether the DAI can also support inverted clocks for the specified + * format. + */ +#define SND_SOC_DAIFMT_NB_NF (1 << 8) /* normal bit clock + frame */ +#define SND_SOC_DAIFMT_NB_IF (2 << 8) /* normal BCLK + inv FRM */ +#define SND_SOC_DAIFMT_IB_NF (3 << 8) /* invert BCLK + nor FRM */ +#define SND_SOC_DAIFMT_IB_IF (4 << 8) /* invert BCLK + FRM */ + +/* + * DAI hardware clock masters. + * + * This is wrt the codec, the inverse is true for the interface + * i.e. if the codec is clk and FRM master then the interface is + * clk and frame slave. + */ +#define SND_SOC_DAIFMT_CBM_CFM (1 << 12) /* codec clk & FRM master */ +#define SND_SOC_DAIFMT_CBS_CFM (2 << 12) /* codec clk slave & FRM master */ +#define SND_SOC_DAIFMT_CBM_CFS (3 << 12) /* codec clk master & frame slave */ +#define SND_SOC_DAIFMT_CBS_CFS (4 << 12) /* codec clk & FRM slave */ + +#define SND_SOC_DAIFMT_FORMAT_MASK 0x000f +#define SND_SOC_DAIFMT_CLOCK_MASK 0x00f0 +#define SND_SOC_DAIFMT_INV_MASK 0x0f00 +#define SND_SOC_DAIFMT_MASTER_MASK 0xf000 + +/* + * Master Clock Directions + */ +#define SND_SOC_CLOCK_IN 0 +#define SND_SOC_CLOCK_OUT 1 + +/* I2S Tx Control */ +#define I2S_TX_ON 1 +#define I2S_TX_OFF 0 + +#define FIFO_LENGTH 64 + +/* I2s Registers */ +struct i2s_reg { + unsigned int con; /* base + 0 , Control register */ + unsigned int mod; /* Mode register */ + unsigned int fic; /* FIFO control register */ + unsigned int psr; /* Reserved */ + unsigned int txd; /* Transmit data register */ + unsigned int rxd; /* Receive Data Register */ +}; + +/* This structure stores the i2s related information */ +struct i2stx_info { + unsigned int rfs; /* LR clock frame size */ + unsigned int bfs; /* Bit slock frame size */ + unsigned int audio_pll_clk; /* Audio pll frequency in Hz */ + unsigned int samplingrate; /* sampling rate */ + unsigned int bitspersample; /* bits per sample */ + unsigned int channels; /* audio channels */ + unsigned int base_address; /* I2S Register Base */ +}; + +/* + * Sends the given data through i2s tx + * + * @param pi2s_tx pointer of i2s transmitter parameter structure. + * @param data address of the data buffer + * @param data_size array size of the int buffer (total size / size of int) + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_transfer_tx_data(struct i2stx_info *pi2s_tx, unsigned *data, + unsigned long data_size); + +/* + * Initialise i2s transmiter + * + * @param pi2s_tx pointer of i2s transmitter parameter structure. + * + * @return int value 0 for success, -1 in case of error + */ +int i2s_tx_init(struct i2stx_info *pi2s_tx); + +#endif /* __I2S_H__ */ diff --git a/include/image.h b/include/image.h index 3a472c9..f5adc50 100644 --- a/include/image.h +++ b/include/image.h @@ -463,7 +463,6 @@ static inline void image_set_name(image_header_t *hdr, const char *name) int image_check_hcrc(const image_header_t *hdr); int image_check_dcrc(const image_header_t *hdr); #ifndef USE_HOSTCC -int getenv_yesno(char *var); ulong getenv_bootm_low(void); phys_size_t getenv_bootm_size(void); phys_size_t getenv_bootm_mapsize(void); diff --git a/include/lcd.h b/include/lcd.h index 2517d39..c24164a 100644 --- a/include/lcd.h +++ b/include/lcd.h @@ -57,6 +57,14 @@ extern void lcd_initcolregs (void); extern struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp); extern int bmp_display(ulong addr, int x, int y); +/** + * Set whether we need to flush the dcache when changing the LCD image. This + * defaults to off. + * + * @param flush non-zero to flush cache after update, 0 to skip + */ +void lcd_set_flush_dcache(int flush); + #if defined CONFIG_MPC823 /* * LCD controller stucture for MPC823 CPU @@ -333,6 +341,9 @@ void lcd_position_cursor(unsigned col, unsigned row); /* Allow boards to customize the information displayed */ void lcd_show_board_info(void); +/* Return the size of the LCD frame buffer, and the line length */ +int lcd_get_size(int *line_length); + /************************************************************************/ /* ** BITMAP DISPLAY SUPPORT */ /************************************************************************/ diff --git a/include/ld9040.h b/include/ld9040.h new file mode 100644 index 0000000..fe99390 --- /dev/null +++ b/include/ld9040.h @@ -0,0 +1,32 @@ +/* + * ld9040 AMOLED LCD panel driver. + * + * Copyright (C) 2012 Samsung Electronics + * Donghwa Lee <dh09.lee@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __LD9040_H_ +#define __LD9040_H_ + +void ld9040_cfg_ldo(void); +void ld9040_enable_ldo(unsigned int onoff); + +#endif /* __LD9040_H_ */ diff --git a/include/linux/linux_string.h b/include/linux/linux_string.h new file mode 100644 index 0000000..192b4c9 --- /dev/null +++ b/include/linux/linux_string.h @@ -0,0 +1,8 @@ +#ifndef _LINUX_LINUX_STRING_H_ +#define _LINUX_LINUX_STRING_H_ + +extern char * skip_spaces(const char *); + +extern char *strim(char *); + +#endif diff --git a/include/linux/string.h b/include/linux/string.h index 9a8cbc2..e9b134d 100644 --- a/include/linux/string.h +++ b/include/linux/string.h @@ -38,8 +38,11 @@ extern int strcmp(const char *,const char *); #ifndef __HAVE_ARCH_STRNCMP extern int strncmp(const char *,const char *,__kernel_size_t); #endif -#if 0 /* not used - was: #ifndef __HAVE_ARCH_STRNICMP */ -extern int strnicmp(const char *, const char *, __kernel_size_t); +#ifndef __HAVE_ARCH_STRCASECMP +int strcasecmp(const char *s1, const char *s2); +#endif +#ifndef __HAVE_ARCH_STRNCASECMP +extern int strncasecmp(const char *s1, const char *s2, __kernel_size_t len); #endif #ifndef __HAVE_ARCH_STRCHR extern char * strchr(const char *,int); @@ -47,10 +50,7 @@ extern char * strchr(const char *,int); #ifndef __HAVE_ARCH_STRRCHR extern char * strrchr(const char *,int); #endif -extern char * skip_spaces(const char *); - -extern char *strim(char *); - +#include <linux/linux_string.h> #ifndef __HAVE_ARCH_STRSTR extern char * strstr(const char *,const char *); #endif diff --git a/include/part.h b/include/part.h index 27ea283..c58a734 100644 --- a/include/part.h +++ b/include/part.h @@ -176,10 +176,62 @@ int test_part_amiga (block_dev_desc_t *dev_desc); #endif #ifdef CONFIG_EFI_PARTITION +#include <part_efi.h> /* disk/part_efi.c */ int get_partition_info_efi (block_dev_desc_t * dev_desc, int part, disk_partition_t *info); void print_part_efi (block_dev_desc_t *dev_desc); int test_part_efi (block_dev_desc_t *dev_desc); + +/** + * write_gpt_table() - Write the GUID Partition Table to disk + * + * @param dev_desc - block device descriptor + * @param gpt_h - pointer to GPT header representation + * @param gpt_e - pointer to GPT partition table entries + * + * @return - zero on success, otherwise error + */ +int write_gpt_table(block_dev_desc_t *dev_desc, + gpt_header *gpt_h, gpt_entry *gpt_e); + +/** + * gpt_fill_pte(): Fill the GPT partition table entry + * + * @param gpt_h - GPT header representation + * @param gpt_e - GPT partition table entries + * @param partitions - list of partitions + * @param parts - number of partitions + * + * @return zero on success + */ +int gpt_fill_pte(gpt_header *gpt_h, gpt_entry *gpt_e, + disk_partition_t *partitions, int parts); + +/** + * gpt_fill_header(): Fill the GPT header + * + * @param dev_desc - block device descriptor + * @param gpt_h - GPT header representation + * @param str_guid - disk guid string representation + * @param parts_count - number of partitions + * + * @return - error on str_guid conversion error + */ +int gpt_fill_header(block_dev_desc_t *dev_desc, gpt_header *gpt_h, + char *str_guid, int parts_count); + +/** + * gpt_restore(): Restore GPT partition table + * + * @param dev_desc - block device descriptor + * @param str_disk_guid - disk GUID + * @param partitions - list of partitions + * @param parts - number of partitions + * + * @return zero on success + */ +int gpt_restore(block_dev_desc_t *dev_desc, char *str_disk_guid, + disk_partition_t *partitions, const int parts_count); #endif #endif /* _PART_H */ diff --git a/disk/part_efi.h b/include/part_efi.h index 4e28d1d..6de0a32 100644 --- a/disk/part_efi.h +++ b/include/part_efi.h @@ -29,6 +29,8 @@ * http://developer.intel.com/technology/efi/efi.htm */ +#include <linux/compiler.h> + #ifndef _DISK_PART_EFI_H #define _DISK_PART_EFI_H @@ -41,6 +43,8 @@ #define GPT_HEADER_REVISION_V1 0x00010000 #define GPT_PRIMARY_PARTITION_TABLE_LBA 1ULL #define GPT_ENTRY_NAME "gpt" +#define GPT_ENTRY_NUMBERS 128 +#define GPT_ENTRY_SIZE 128 #define EFI_GUID(a,b,c,d0,d1,d2,d3,d4,d5,d6,d7) \ ((efi_guid_t) \ @@ -72,73 +76,72 @@ 0xa2, 0x3c, 0x23, 0x8f, 0x2a, 0x3d, 0xf9, 0x28) /* linux/include/efi.h */ -typedef unsigned short efi_char16_t; +typedef u16 efi_char16_t; typedef struct { - unsigned char b[16]; + u8 b[16]; } efi_guid_t; /* based on linux/include/genhd.h */ struct partition { - unsigned char boot_ind; /* 0x80 - active */ - unsigned char head; /* starting head */ - unsigned char sector; /* starting sector */ - unsigned char cyl; /* starting cylinder */ - unsigned char sys_ind; /* What partition type */ - unsigned char end_head; /* end head */ - unsigned char end_sector; /* end sector */ - unsigned char end_cyl; /* end cylinder */ - unsigned char start_sect[4]; /* starting sector counting from 0 */ - unsigned char nr_sects[4]; /* nr of sectors in partition */ -} __attribute__ ((packed)); + u8 boot_ind; /* 0x80 - active */ + u8 head; /* starting head */ + u8 sector; /* starting sector */ + u8 cyl; /* starting cylinder */ + u8 sys_ind; /* What partition type */ + u8 end_head; /* end head */ + u8 end_sector; /* end sector */ + u8 end_cyl; /* end cylinder */ + __le32 start_sect; /* starting sector counting from 0 */ + __le32 nr_sects; /* nr of sectors in partition */ +} __packed; /* based on linux/fs/partitions/efi.h */ typedef struct _gpt_header { - unsigned char signature[8]; - unsigned char revision[4]; - unsigned char header_size[4]; - unsigned char header_crc32[4]; - unsigned char reserved1[4]; - unsigned char my_lba[8]; - unsigned char alternate_lba[8]; - unsigned char first_usable_lba[8]; - unsigned char last_usable_lba[8]; + __le64 signature; + __le32 revision; + __le32 header_size; + __le32 header_crc32; + __le32 reserved1; + __le64 my_lba; + __le64 alternate_lba; + __le64 first_usable_lba; + __le64 last_usable_lba; efi_guid_t disk_guid; - unsigned char partition_entry_lba[8]; - unsigned char num_partition_entries[4]; - unsigned char sizeof_partition_entry[4]; - unsigned char partition_entry_array_crc32[4]; - unsigned char reserved2[GPT_BLOCK_SIZE - 92]; -} __attribute__ ((packed)) gpt_header; + __le64 partition_entry_lba; + __le32 num_partition_entries; + __le32 sizeof_partition_entry; + __le32 partition_entry_array_crc32; + u8 reserved2[GPT_BLOCK_SIZE - 92]; +} __packed gpt_header; typedef union _gpt_entry_attributes { struct { - unsigned long long required_to_function:1; - unsigned long long no_block_io_protocol:1; - unsigned long long legacy_bios_bootable:1; - unsigned long long reserved:45; - unsigned long long type_guid_specific:16; + u64 required_to_function:1; + u64 no_block_io_protocol:1; + u64 legacy_bios_bootable:1; + u64 reserved:45; + u64 type_guid_specific:16; } fields; unsigned long long raw; -} __attribute__ ((packed)) gpt_entry_attributes; +} __packed gpt_entry_attributes; #define PARTNAME_SZ (72 / sizeof(efi_char16_t)) typedef struct _gpt_entry { efi_guid_t partition_type_guid; efi_guid_t unique_partition_guid; - unsigned char starting_lba[8]; - unsigned char ending_lba[8]; + __le64 starting_lba; + __le64 ending_lba; gpt_entry_attributes attributes; efi_char16_t partition_name[PARTNAME_SZ]; -} -__attribute__ ((packed)) gpt_entry; +} __packed gpt_entry; typedef struct _legacy_mbr { - unsigned char boot_code[440]; - unsigned char unique_mbr_signature[4]; - unsigned char unknown[2]; + u8 boot_code[440]; + __le32 unique_mbr_signature; + __le16 unknown; struct partition partition_record[4]; - unsigned char signature[2]; -} __attribute__ ((packed)) legacy_mbr; + __le16 signature; +} __packed legacy_mbr; #endif /* _DISK_PART_EFI_H */ diff --git a/include/power/max77686_pmic.h b/include/power/max77686_pmic.h new file mode 100644 index 0000000..d949ace --- /dev/null +++ b/include/power/max77686_pmic.h @@ -0,0 +1,158 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Rajeshwari Shinde <rajeshwari.s@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __MAX77686_H_ +#define __MAX77686_H_ + +enum { + MAX77686_REG_PMIC_ID = 0x0, + MAX77686_REG_PMIC_INTSRC, + MAX77686_REG_PMIC_INT1, + MAX77686_REG_PMIC_INT2, + MAX77686_REG_PMIC_INT1MSK, + MAX77686_REG_PMIC_INT2MSK, + + MAX77686_REG_PMIC_STATUS1, + MAX77686_REG_PMIC_STATUS2, + + MAX77686_REG_PMIC_PWRON, + MAX77686_REG_PMIC_ONOFFDELAY, + MAX77686_REG_PMIC_MRSTB, + + MAX77686_REG_PMIC_BUCK1CRTL = 0x10, + MAX77686_REG_PMIC_BUCK1OUT, + MAX77686_REG_PMIC_BUCK2CTRL1, + MAX77686_REG_PMIC_BUCK234FREQ, + MAX77686_REG_PMIC_BUCK2DVS1, + MAX77686_REG_PMIC_BUCK2DVS2, + MAX77686_REG_PMIC_BUCK2DVS3, + MAX77686_REG_PMIC_BUCK2DVS4, + MAX77686_REG_PMIC_BUCK2DVS5, + MAX77686_REG_PMIC_BUCK2DVS6, + MAX77686_REG_PMIC_BUCK2DVS7, + MAX77686_REG_PMIC_BUCK2DVS8, + MAX77686_REG_PMIC_BUCK3CTRL, + MAX77686_REG_PMIC_BUCK3DVS1, + MAX77686_REG_PMIC_BUCK3DVS2, + MAX77686_REG_PMIC_BUCK3DVS3, + MAX77686_REG_PMIC_BUCK3DVS4, + MAX77686_REG_PMIC_BUCK3DVS5, + MAX77686_REG_PMIC_BUCK3DVS6, + MAX77686_REG_PMIC_BUCK3DVS7, + MAX77686_REG_PMIC_BUCK3DVS8, + MAX77686_REG_PMIC_BUCK4CTRL1, + MAX77686_REG_PMIC_BUCK4DVS1 = 0x28, + MAX77686_REG_PMIC_BUCK4DVS2, + MAX77686_REG_PMIC_BUCK4DVS3, + MAX77686_REG_PMIC_BUCK4DVS4, + MAX77686_REG_PMIC_BUCK4DVS5, + MAX77686_REG_PMIC_BUCK4DVS6, + MAX77686_REG_PMIC_BUCK4DVS7, + MAX77686_REG_PMIC_BUCK4DVS8, + MAX77686_REG_PMIC_BUCK5CTRL, + MAX77686_REG_PMIC_BUCK5OUT, + MAX77686_REG_PMIC_BUCK6CRTL, + MAX77686_REG_PMIC_BUCK6OUT, + MAX77686_REG_PMIC_BUCK7CRTL, + MAX77686_REG_PMIC_BUCK7OUT, + MAX77686_REG_PMIC_BUCK8CRTL, + MAX77686_REG_PMIC_BUCK8OUT, + MAX77686_REG_PMIC_BUCK9CRTL, + MAX77686_REG_PMIC_BUCK9OUT, + + MAX77686_REG_PMIC_LDO1CTRL1 = 0x40, + MAX77686_REG_PMIC_LDO2CTRL1, + MAX77686_REG_PMIC_LDO3CTRL1, + MAX77686_REG_PMIC_LDO4CTRL1, + MAX77686_REG_PMIC_LDO5CTRL1, + MAX77686_REG_PMIC_LDO6CTRL1, + MAX77686_REG_PMIC_LDO7CTRL1, + MAX77686_REG_PMIC_LDO8CTRL1, + MAX77686_REG_PMIC_LDO9CTRL1, + MAX77686_REG_PMIC_LDO10CTRL1, + MAX77686_REG_PMIC_LDO11CTRL1, + MAX77686_REG_PMIC_LDO12CTRL1, + MAX77686_REG_PMIC_LDO13CTRL1, + MAX77686_REG_PMIC_LDO14CTRL1, + MAX77686_REG_PMIC_LDO15CTRL1, + MAX77686_REG_PMIC_LDO16CTRL1, + MAX77686_REG_PMIC_LDO17CTRL1, + MAX77686_REG_PMIC_LDO18CTRL1, + MAX77686_REG_PMIC_LDO19CTRL1, + MAX77686_REG_PMIC_LDO20CTRL1, + MAX77686_REG_PMIC_LDO21CTRL1, + MAX77686_REG_PMIC_LDO22CTRL1, + MAX77686_REG_PMIC_LDO23CTRL1, + MAX77686_REG_PMIC_LDO24CTRL1, + MAX77686_REG_PMIC_LDO25CTRL1, + MAX77686_REG_PMIC_LDO26CTRL1, + MAX77686_REG_PMIC_LDO1CTRL2, + MAX77686_REG_PMIC_LDO2CTRL2, + MAX77686_REG_PMIC_LDO3CTRL2, + MAX77686_REG_PMIC_LDO4CTRL2, + MAX77686_REG_PMIC_LDO5CTRL2, + MAX77686_REG_PMIC_LDO6CTRL2, + MAX77686_REG_PMIC_LDO7CTRL2, + MAX77686_REG_PMIC_LDO8CTRL2, + MAX77686_REG_PMIC_LDO9CTRL2, + MAX77686_REG_PMIC_LDO10CTRL2, + MAX77686_REG_PMIC_LDO11CTRL2, + MAX77686_REG_PMIC_LDO12CTRL2, + MAX77686_REG_PMIC_LDO13CTRL2, + MAX77686_REG_PMIC_LDO14CTRL2, + MAX77686_REG_PMIC_LDO15CTRL2, + MAX77686_REG_PMIC_LDO16CTRL2, + MAX77686_REG_PMIC_LDO17CTRL2, + MAX77686_REG_PMIC_LDO18CTRL2, + MAX77686_REG_PMIC_LDO19CTRL2, + MAX77686_REG_PMIC_LDO20CTRL2, + MAX77686_REG_PMIC_LDO21CTRL2, + MAX77686_REG_PMIC_LDO22CTRL2, + MAX77686_REG_PMIC_LDO23CTRL2, + MAX77686_REG_PMIC_LDO24CTRL2, + MAX77686_REG_PMIC_LDO25CTRL2, + MAX77686_REG_PMIC_LDO26CTRL2, + + MAX77686_REG_PMIC_BBAT = 0x7e, + MAX77686_REG_PMIC_32KHZ, + + PMIC_NUM_OF_REGS, +}; + +/* I2C device address for pmic max77686 */ +#define MAX77686_I2C_ADDR (0x12 >> 1) + +enum { + REG_DISABLE = 0, + REG_ENABLE +}; + +enum { + LDO_OFF = 0, + LDO_ON, + + DIS_LDO = (0x00 << 6), + EN_LDO = (0x3 << 6), +}; + +#endif /* __MAX77686_PMIC_H_ */ diff --git a/include/power/max8998_pmic.h b/include/power/max8998_pmic.h index ca21f88..0e559f9 100644 --- a/include/power/max8998_pmic.h +++ b/include/power/max8998_pmic.h @@ -76,7 +76,9 @@ enum { #define MAX8998_LDO3 (1 << 2) #define MAX8998_LDO4 (1 << 1) +#define MAX8998_LDO7 (1 << 6) #define MAX8998_LDO8 (1 << 5) +#define MAX8998_LDO17 (1 << 4) #define MAX8998_SAFEOUT1 (1 << 4) #define MAX8998_I2C_ADDR (0xCC >> 1) diff --git a/include/search.h b/include/search.h index 93e1cbc..13d3be6 100644 --- a/include/search.h +++ b/include/search.h @@ -32,6 +32,12 @@ #define __set_errno(val) do { errno = val; } while (0) +enum env_op { + env_op_create, + env_op_delete, + env_op_overwrite, +}; + /* Action which shall be performed in the call the hsearch. */ typedef enum { FIND, @@ -41,6 +47,9 @@ typedef enum { typedef struct entry { const char *key; char *data; + int (*callback)(const char *name, const char *value, enum env_op op, + int flags); + int flags; } ENTRY; /* Opaque type for internal use. */ @@ -59,21 +68,20 @@ struct hsearch_data { unsigned int filled; /* * Callback function which will check whether the given change for variable - * "name" from "oldval" to "newval" may be applied or not, and possibly apply - * such change. + * "item" to "newval" may be applied or not, and possibly apply such change. * When (flag & H_FORCE) is set, it shall not print out any error message and * shall force overwriting of write-once variables. .* Must return 0 for approval, 1 for denial. */ - int (*apply)(const char *name, const char *oldval, - const char *newval, int flag); + int (*change_ok)(const ENTRY *__item, const char *newval, enum env_op, + int flag); }; /* Create a new hashing table which will at most contain NEL elements. */ extern int hcreate_r(size_t __nel, struct hsearch_data *__htab); /* Destroy current internal hashing table. */ -extern void hdestroy_r(struct hsearch_data *__htab, int do_apply); +extern void hdestroy_r(struct hsearch_data *__htab); /* * Search for entry matching ITEM.key in internal hash table. If @@ -82,7 +90,7 @@ extern void hdestroy_r(struct hsearch_data *__htab, int do_apply); * ITEM.data. * */ extern int hsearch_r(ENTRY __item, ACTION __action, ENTRY ** __retval, - struct hsearch_data *__htab); + struct hsearch_data *__htab, int __flag); /* * Search for an entry matching `MATCH'. Otherwise, Same semantics @@ -99,10 +107,10 @@ extern int hstrstr_r(const char *__match, int __last_idx, ENTRY ** __retval, /* Search and delete entry matching ITEM.key in internal hash table. */ extern int hdelete_r(const char *__key, struct hsearch_data *__htab, - int do_apply); + int __flag); extern ssize_t hexport_r(struct hsearch_data *__htab, - const char __sep, char **__resp, size_t __size, + const char __sep, int __flag, char **__resp, size_t __size, int argc, char * const argv[]); /* @@ -113,10 +121,15 @@ extern ssize_t hexport_r(struct hsearch_data *__htab, */ extern int himport_r(struct hsearch_data *__htab, const char *__env, size_t __size, const char __sep, - int __flag, int nvars, char * const vars[], int do_apply); + int __flag, int nvars, char * const vars[]); + +/* Walk the whole table calling the callback on each element */ +extern int hwalk_r(struct hsearch_data *__htab, int (*callback)(ENTRY *)); -/* Flags for himport_r() */ -#define H_NOCLEAR (1 << 0) /* do not clear hash table before importing */ -#define H_FORCE (1 << 1) /* overwrite read-only/write-once variables */ +/* Flags for himport_r(), hexport_r(), hdelete_r(), and hsearch_r() */ +#define H_NOCLEAR (1 << 0) /* do not clear hash table before importing */ +#define H_FORCE (1 << 1) /* overwrite read-only/write-once variables */ +#define H_INTERACTIVE (1 << 2) /* indicate that an import is user directed */ +#define H_HIDE_DOT (1 << 3) /* don't print env vars that begin with '.' */ #endif /* search.h */ diff --git a/include/sha1.h b/include/sha1.h index 734d1fb..da09dab 100644 --- a/include/sha1.h +++ b/include/sha1.h @@ -59,7 +59,8 @@ void sha1_starts( sha1_context *ctx ); * \param input buffer holding the data * \param ilen length of the input data */ -void sha1_update( sha1_context *ctx, unsigned char *input, int ilen ); +void sha1_update(sha1_context *ctx, const unsigned char *input, + unsigned int ilen); /** * \brief SHA-1 final digest @@ -76,8 +77,8 @@ void sha1_finish( sha1_context *ctx, unsigned char output[20] ); * \param ilen length of the input data * \param output SHA-1 checksum result */ -void sha1_csum( unsigned char *input, int ilen, - unsigned char output[20] ); +void sha1_csum(const unsigned char *input, unsigned int ilen, + unsigned char *output); /** * \brief Output = SHA-1( input buffer ), with watchdog triggering @@ -87,17 +88,8 @@ void sha1_csum( unsigned char *input, int ilen, * \param output SHA-1 checksum result * \param chunk_sz watchdog triggering period (in bytes of input processed) */ -void sha1_csum_wd (unsigned char *input, int ilen, - unsigned char output[20], unsigned int chunk_sz); - -/** - * \brief Output = SHA-1( file contents ) - * - * \param path input file name - * \param output SHA-1 checksum result - * \return 0 if successful, or 1 if fopen failed - */ -int sha1_file( char *path, unsigned char output[20] ); +void sha1_csum_wd(const unsigned char *input, unsigned int ilen, + unsigned char *output, unsigned int chunk_sz); /** * \brief Output = HMAC-SHA-1( input buffer, hmac key ) @@ -108,9 +100,9 @@ int sha1_file( char *path, unsigned char output[20] ); * \param ilen length of the input data * \param output HMAC-SHA-1 result */ -void sha1_hmac( unsigned char *key, int keylen, - unsigned char *input, int ilen, - unsigned char output[20] ); +void sha1_hmac(const unsigned char *key, int keylen, + const unsigned char *input, unsigned int ilen, + unsigned char *output); /** * \brief Checkup routine diff --git a/include/sha256.h b/include/sha256.h index e38ea89..beadab3 100644 --- a/include/sha256.h +++ b/include/sha256.h @@ -3,6 +3,9 @@ #define SHA256_SUM_LEN 32 +/* Reset watchdog each time we process this many bytes */ +#define CHUNKSZ_SHA256 (64 * 1024) + typedef struct { uint32_t total[2]; uint32_t state[8]; @@ -10,7 +13,10 @@ typedef struct { } sha256_context; void sha256_starts(sha256_context * ctx); -void sha256_update(sha256_context * ctx, uint8_t * input, uint32_t length); +void sha256_update(sha256_context *ctx, const uint8_t *input, uint32_t length); void sha256_finish(sha256_context * ctx, uint8_t digest[SHA256_SUM_LEN]); +void sha256_csum_wd(const unsigned char *input, unsigned int ilen, + unsigned char *output, unsigned int chunk_sz); + #endif /* _SHA256_H */ diff --git a/include/sound.h b/include/sound.h new file mode 100644 index 0000000..ea0b115 --- /dev/null +++ b/include/sound.h @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * R. Chandrasekar < rcsekar@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __SOUND_H__ +#define __SOUND_H__ + +/* sound codec enum */ +enum en_sound_codec { + CODEC_WM_8994, + CODEC_WM_8995, + CODEC_MAX +}; + +/* sound codec enum */ +enum sound_compat { + AUDIO_COMPAT_SPI, + AUDIO_COMPAT_I2C, +}; + +/* Codec information structure to store the info from device tree */ +struct sound_codec_info { + int i2c_bus; + int i2c_dev_addr; + enum en_sound_codec codec_type; +}; + +/* + * Initialises audio sub system + * + * @return int value 0 for success, -1 for error + */ +int sound_init(void); + +/* + * plays the pcm data buffer in pcm_data.h through i2s1 to make the + * sine wave sound + * + * @return int 0 for success, -1 for error + */ +int sound_play(uint32_t msec, uint32_t frequency); + +#endif /* __SOUND__H__ */ diff --git a/include/twl6035.h b/include/twl6035.h index e21ddba..ce74348 100644 --- a/include/twl6035.h +++ b/include/twl6035.h @@ -39,4 +39,4 @@ int twl6035_i2c_write_u8(u8 chip_no, u8 val, u8 reg); int twl6035_i2c_read_u8(u8 chip_no, u8 *val, u8 reg); void twl6035_init_settings(void); -void twl6035_mmc1_poweron_ldo(void); +int twl6035_mmc1_poweron_ldo(void); diff --git a/lib/Makefile b/lib/Makefile index f83f6e8..86ca1a6 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -69,6 +69,7 @@ endif COBJS-y += crc32.o COBJS-y += ctype.o COBJS-y += div64.o +COBJS-y += linux_string.o COBJS-y += string.o COBJS-y += time.o COBJS-$(CONFIG_BOOTP_PXE) += uuid.o diff --git a/lib/fdtdec.c b/lib/fdtdec.c index 348144a..6dba438 100644 --- a/lib/fdtdec.c +++ b/lib/fdtdec.c @@ -43,6 +43,8 @@ static const char * const compat_names[COMPAT_COUNT] = { COMPAT(NVIDIA_TEGRA20_EMC_TABLE, "nvidia,tegra20-emc-table"), COMPAT(NVIDIA_TEGRA20_KBC, "nvidia,tegra20-kbc"), COMPAT(NVIDIA_TEGRA20_NAND, "nvidia,tegra20-nand"), + COMPAT(NVIDIA_TEGRA20_PWM, "nvidia,tegra20-pwm"), + COMPAT(NVIDIA_TEGRA20_DC, "nvidia,tegra20-dc"), }; const char *fdtdec_get_compatible(enum fdt_compat_id id) diff --git a/lib/hashtable.c b/lib/hashtable.c index 94a7b61..07ebfb2 100644 --- a/lib/hashtable.c +++ b/lib/hashtable.c @@ -54,7 +54,9 @@ #define CONFIG_ENV_MAX_ENTRIES 512 #endif -#include "search.h" +#include <env_callback.h> +#include <env_flags.h> +#include <search.h> /* * [Aho,Sethi,Ullman] Compilers: Principles, Techniques and Tools, 1986 @@ -66,12 +68,16 @@ * Instead the interface of all functions is extended to take an argument * which describes the current status. */ + typedef struct _ENTRY { int used; ENTRY entry; } _ENTRY; +static void _hdelete(const char *key, struct hsearch_data *htab, ENTRY *ep, + int idx); + /* * hcreate() */ @@ -142,7 +148,7 @@ int hcreate_r(size_t nel, struct hsearch_data *htab) * be freed and the local static variable can be marked as not used. */ -void hdestroy_r(struct hsearch_data *htab, int do_apply) +void hdestroy_r(struct hsearch_data *htab) { int i; @@ -156,10 +162,7 @@ void hdestroy_r(struct hsearch_data *htab, int do_apply) for (i = 1; i <= htab->size; ++i) { if (htab->table[i].used > 0) { ENTRY *ep = &htab->table[i].entry; - if (do_apply && htab->apply != NULL) { - /* deletion is always forced */ - htab->apply(ep->key, ep->data, NULL, H_FORCE); - } + free((void *)ep->key); free(ep->data); } @@ -250,14 +253,65 @@ int hmatch_r(const char *match, int last_idx, ENTRY ** retval, return 0; } +/* + * Compare an existing entry with the desired key, and overwrite if the action + * is ENTER. This is simply a helper function for hsearch_r(). + */ +static inline int _compare_and_overwrite_entry(ENTRY item, ACTION action, + ENTRY **retval, struct hsearch_data *htab, int flag, + unsigned int hval, unsigned int idx) +{ + if (htab->table[idx].used == hval + && strcmp(item.key, htab->table[idx].entry.key) == 0) { + /* Overwrite existing value? */ + if ((action == ENTER) && (item.data != NULL)) { + /* check for permission */ + if (htab->change_ok != NULL && htab->change_ok( + &htab->table[idx].entry, item.data, + env_op_overwrite, flag)) { + debug("change_ok() rejected setting variable " + "%s, skipping it!\n", item.key); + __set_errno(EPERM); + *retval = NULL; + return 0; + } + + /* If there is a callback, call it */ + if (htab->table[idx].entry.callback && + htab->table[idx].entry.callback(item.key, + item.data, env_op_overwrite, flag)) { + debug("callback() rejected setting variable " + "%s, skipping it!\n", item.key); + __set_errno(EINVAL); + *retval = NULL; + return 0; + } + + free(htab->table[idx].entry.data); + htab->table[idx].entry.data = strdup(item.data); + if (!htab->table[idx].entry.data) { + __set_errno(ENOMEM); + *retval = NULL; + return 0; + } + } + /* return found entry */ + *retval = &htab->table[idx].entry; + return idx; + } + /* keep searching */ + return -1; +} + int hsearch_r(ENTRY item, ACTION action, ENTRY ** retval, - struct hsearch_data *htab) + struct hsearch_data *htab, int flag) { unsigned int hval; unsigned int count; unsigned int len = strlen(item.key); unsigned int idx; unsigned int first_deleted = 0; + int ret; /* Compute an value for the given string. Perhaps use a better method. */ hval = len; @@ -289,23 +343,10 @@ int hsearch_r(ENTRY item, ACTION action, ENTRY ** retval, && !first_deleted) first_deleted = idx; - if (htab->table[idx].used == hval - && strcmp(item.key, htab->table[idx].entry.key) == 0) { - /* Overwrite existing value? */ - if ((action == ENTER) && (item.data != NULL)) { - free(htab->table[idx].entry.data); - htab->table[idx].entry.data = - strdup(item.data); - if (!htab->table[idx].entry.data) { - __set_errno(ENOMEM); - *retval = NULL; - return 0; - } - } - /* return found entry */ - *retval = &htab->table[idx].entry; - return idx; - } + ret = _compare_and_overwrite_entry(item, action, retval, htab, + flag, hval, idx); + if (ret != -1) + return ret; /* * Second hash function: @@ -331,23 +372,10 @@ int hsearch_r(ENTRY item, ACTION action, ENTRY ** retval, break; /* If entry is found use it. */ - if ((htab->table[idx].used == hval) - && strcmp(item.key, htab->table[idx].entry.key) == 0) { - /* Overwrite existing value? */ - if ((action == ENTER) && (item.data != NULL)) { - free(htab->table[idx].entry.data); - htab->table[idx].entry.data = - strdup(item.data); - if (!htab->table[idx].entry.data) { - __set_errno(ENOMEM); - *retval = NULL; - return 0; - } - } - /* return found entry */ - *retval = &htab->table[idx].entry; - return idx; - } + ret = _compare_and_overwrite_entry(item, action, retval, + htab, flag, hval, idx); + if (ret != -1) + return ret; } while (htab->table[idx].used); } @@ -383,6 +411,34 @@ int hsearch_r(ENTRY item, ACTION action, ENTRY ** retval, ++htab->filled; + /* This is a new entry, so look up a possible callback */ + env_callback_init(&htab->table[idx].entry); + /* Also look for flags */ + env_flags_init(&htab->table[idx].entry); + + /* check for permission */ + if (htab->change_ok != NULL && htab->change_ok( + &htab->table[idx].entry, item.data, env_op_create, flag)) { + debug("change_ok() rejected setting variable " + "%s, skipping it!\n", item.key); + _hdelete(item.key, htab, &htab->table[idx].entry, idx); + __set_errno(EPERM); + *retval = NULL; + return 0; + } + + /* If there is a callback, call it */ + if (htab->table[idx].entry.callback && + htab->table[idx].entry.callback(item.key, item.data, + env_op_create, flag)) { + debug("callback() rejected setting variable " + "%s, skipping it!\n", item.key); + _hdelete(item.key, htab, &htab->table[idx].entry, idx); + __set_errno(EINVAL); + *retval = NULL; + return 0; + } + /* return new entry */ *retval = &htab->table[idx].entry; return 1; @@ -404,7 +460,21 @@ int hsearch_r(ENTRY item, ACTION action, ENTRY ** retval, * do that. */ -int hdelete_r(const char *key, struct hsearch_data *htab, int do_apply) +static void _hdelete(const char *key, struct hsearch_data *htab, ENTRY *ep, + int idx) +{ + /* free used ENTRY */ + debug("hdelete: DELETING key \"%s\"\n", key); + free((void *)ep->key); + free(ep->data); + ep->callback = NULL; + ep->flags = 0; + htab->table[idx].used = -1; + + --htab->filled; +} + +int hdelete_r(const char *key, struct hsearch_data *htab, int flag) { ENTRY e, *ep; int idx; @@ -413,20 +483,31 @@ int hdelete_r(const char *key, struct hsearch_data *htab, int do_apply) e.key = (char *)key; - if ((idx = hsearch_r(e, FIND, &ep, htab)) == 0) { + idx = hsearch_r(e, FIND, &ep, htab, 0); + if (idx == 0) { __set_errno(ESRCH); return 0; /* not found */ } - /* free used ENTRY */ - debug("hdelete: DELETING key \"%s\"\n", key); - if (do_apply && htab->apply != NULL) - htab->apply(ep->key, ep->data, NULL, H_FORCE); - free((void *)ep->key); - free(ep->data); - htab->table[idx].used = -1; + /* Check for permission */ + if (htab->change_ok != NULL && + htab->change_ok(ep, NULL, env_op_delete, flag)) { + debug("change_ok() rejected deleting variable " + "%s, skipping it!\n", key); + __set_errno(EPERM); + return 0; + } - --htab->filled; + /* If there is a callback, call it */ + if (htab->table[idx].entry.callback && + htab->table[idx].entry.callback(key, NULL, env_op_delete, flag)) { + debug("callback() rejected deleting variable " + "%s, skipping it!\n", key); + __set_errno(EINVAL); + return 0; + } + + _hdelete(key, htab, ep, idx); return 1; } @@ -482,7 +563,7 @@ static int cmpkey(const void *p1, const void *p2) return (strcmp(e1->key, e2->key)); } -ssize_t hexport_r(struct hsearch_data *htab, const char sep, +ssize_t hexport_r(struct hsearch_data *htab, const char sep, int flag, char **resp, size_t size, int argc, char * const argv[]) { @@ -519,6 +600,9 @@ ssize_t hexport_r(struct hsearch_data *htab, const char sep, if ((argc > 0) && (found == 0)) continue; + if ((flag & H_HIDE_DOT) && ep->key[0] == '.') + continue; + list[n++] = ep; totlen += strlen(ep->key) + 2; @@ -674,7 +758,7 @@ static int drop_var_from_set(const char *name, int nvars, char * vars[]) int himport_r(struct hsearch_data *htab, const char *env, size_t size, const char sep, int flag, - int nvars, char * const vars[], int do_apply) + int nvars, char * const vars[]) { char *data, *sp, *dp, *name, *value; char *localvars[nvars]; @@ -704,7 +788,7 @@ int himport_r(struct hsearch_data *htab, debug("Destroy Hash Table: %p table = %p\n", htab, htab->table); if (htab->table) - hdestroy_r(htab, do_apply); + hdestroy_r(htab); } /* @@ -770,7 +854,7 @@ int himport_r(struct hsearch_data *htab, if (!drop_var_from_set(name, nvars, localvars)) continue; - if (hdelete_r(name, htab, do_apply) == 0) + if (hdelete_r(name, htab, flag) == 0) debug("DELETE ERROR ##############################\n"); continue; @@ -794,30 +878,10 @@ int himport_r(struct hsearch_data *htab, e.key = name; e.data = value; - /* if there is an apply function, check what it has to say */ - if (do_apply && htab->apply != NULL) { - debug("searching before calling cb function" - " for %s\n", name); - /* - * Search for variable in existing env, so to pass - * its previous value to the apply callback - */ - hsearch_r(e, FIND, &rv, htab); - debug("previous value was %s\n", rv ? rv->data : ""); - if (htab->apply(name, rv ? rv->data : NULL, - value, flag)) { - debug("callback function refused to set" - " variable %s, skipping it!\n", name); - continue; - } - } - - hsearch_r(e, ENTER, &rv, htab); - if (rv == NULL) { + hsearch_r(e, ENTER, &rv, htab, flag); + if (rv == NULL) printf("himport_r: can't insert \"%s=%s\" into hash table\n", name, value); - return 0; - } debug("INSERT: table %p, filled %d/%d rv %p ==> name=\"%s\" value=\"%s\"\n", htab, htab->filled, htab->size, @@ -839,7 +903,7 @@ int himport_r(struct hsearch_data *htab, * b) if the variable was not present in current env, we notify * it might be a typo */ - if (hdelete_r(localvars[i], htab, do_apply) == 0) + if (hdelete_r(localvars[i], htab, flag) == 0) printf("WARNING: '%s' neither in running nor in imported env!\n", localvars[i]); else printf("WARNING: '%s' not in imported env, deleting it!\n", localvars[i]); @@ -848,3 +912,27 @@ int himport_r(struct hsearch_data *htab, debug("INSERT: done\n"); return 1; /* everything OK */ } + +/* + * hwalk_r() + */ + +/* + * Walk all of the entries in the hash, calling the callback for each one. + * this allows some generic operation to be performed on each element. + */ +int hwalk_r(struct hsearch_data *htab, int (*callback)(ENTRY *)) +{ + int i; + int retval; + + for (i = 1; i <= htab->size; ++i) { + if (htab->table[i].used > 0) { + retval = callback(&htab->table[i].entry); + if (retval) + return retval; + } + } + + return 0; +} diff --git a/lib/linux_string.c b/lib/linux_string.c new file mode 100644 index 0000000..d5a5e08 --- /dev/null +++ b/lib/linux_string.c @@ -0,0 +1,51 @@ +/* + * linux/lib/string.c + * + * Copyright (C) 1991, 1992 Linus Torvalds + */ + +#ifdef USE_HOSTCC +#include <stdio.h> +#endif + +#include <linux/ctype.h> +#include <linux/string.h> + +/** + * skip_spaces - Removes leading whitespace from @str. + * @str: The string to be stripped. + * + * Returns a pointer to the first non-whitespace character in @str. + */ +char *skip_spaces(const char *str) +{ + while (isspace(*str)) + ++str; + return (char *)str; +} + +/** + * strim - Removes leading and trailing whitespace from @s. + * @s: The string to be stripped. + * + * Note that the first trailing whitespace is replaced with a %NUL-terminator + * in the given string @s. Returns a pointer to the first non-whitespace + * character in @s. + */ +char *strim(char *s) +{ + size_t size; + char *end; + + s = skip_spaces(s); + size = strlen(s); + if (!size) + return s; + + end = s + size - 1; + while (end >= s && isspace(*end)) + end--; + *(end + 1) = '\0'; + + return s; +} @@ -73,7 +73,7 @@ void sha1_starts (sha1_context * ctx) ctx->state[4] = 0xC3D2E1F0; } -static void sha1_process (sha1_context * ctx, unsigned char data[64]) +static void sha1_process(sha1_context *ctx, const unsigned char data[64]) { unsigned long temp, W[16], A, B, C, D, E; @@ -230,7 +230,8 @@ static void sha1_process (sha1_context * ctx, unsigned char data[64]) /* * SHA-1 process buffer */ -void sha1_update (sha1_context * ctx, unsigned char *input, int ilen) +void sha1_update(sha1_context *ctx, const unsigned char *input, + unsigned int ilen) { int fill; unsigned long left; @@ -305,7 +306,8 @@ void sha1_finish (sha1_context * ctx, unsigned char output[20]) /* * Output = SHA-1( input buffer ) */ -void sha1_csum (unsigned char *input, int ilen, unsigned char output[20]) +void sha1_csum(const unsigned char *input, unsigned int ilen, + unsigned char *output) { sha1_context ctx; @@ -318,12 +320,12 @@ void sha1_csum (unsigned char *input, int ilen, unsigned char output[20]) * Output = SHA-1( input buffer ). Trigger the watchdog every 'chunk_sz' * bytes of input processed. */ -void sha1_csum_wd (unsigned char *input, int ilen, unsigned char output[20], - unsigned int chunk_sz) +void sha1_csum_wd(const unsigned char *input, unsigned int ilen, + unsigned char *output, unsigned int chunk_sz) { sha1_context ctx; #if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) - unsigned char *end, *curr; + const unsigned char *end, *curr; int chunk; #endif @@ -350,8 +352,9 @@ void sha1_csum_wd (unsigned char *input, int ilen, unsigned char output[20], /* * Output = HMAC-SHA-1( input buffer, hmac key ) */ -void sha1_hmac (unsigned char *key, int keylen, - unsigned char *input, int ilen, unsigned char output[20]) +void sha1_hmac(const unsigned char *key, int keylen, + const unsigned char *input, unsigned int ilen, + unsigned char *output) { int i; sha1_context ctx; diff --git a/lib/sha256.c b/lib/sha256.c index deb63a4..ab2db48 100644 --- a/lib/sha256.c +++ b/lib/sha256.c @@ -60,7 +60,7 @@ void sha256_starts(sha256_context * ctx) ctx->state[7] = 0x5BE0CD19; } -void sha256_process(sha256_context * ctx, uint8_t data[64]) +static void sha256_process(sha256_context *ctx, const uint8_t data[64]) { uint32_t temp1, temp2; uint32_t W[64]; @@ -191,7 +191,7 @@ void sha256_process(sha256_context * ctx, uint8_t data[64]) ctx->state[7] += H; } -void sha256_update(sha256_context * ctx, uint8_t * input, uint32_t length) +void sha256_update(sha256_context *ctx, const uint8_t *input, uint32_t length) { uint32_t left, fill; @@ -260,3 +260,36 @@ void sha256_finish(sha256_context * ctx, uint8_t digest[32]) PUT_UINT32_BE(ctx->state[6], digest, 24); PUT_UINT32_BE(ctx->state[7], digest, 28); } + +/* + * Output = SHA-256( input buffer ). Trigger the watchdog every 'chunk_sz' + * bytes of input processed. + */ +void sha256_csum_wd(const unsigned char *input, unsigned int ilen, + unsigned char *output, unsigned int chunk_sz) +{ + sha256_context ctx; +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + unsigned char *end, *curr; + int chunk; +#endif + + sha256_starts(&ctx); + +#if defined(CONFIG_HW_WATCHDOG) || defined(CONFIG_WATCHDOG) + curr = input; + end = input + ilen; + while (curr < end) { + chunk = end - curr; + if (chunk > chunk_sz) + chunk = chunk_sz; + sha256_update(&ctx, curr, chunk); + curr += chunk; + WATCHDOG_RESET(); + } +#else + sha256_update(&ctx, input, ilen); +#endif + + sha256_finish(&ctx, output); +} diff --git a/lib/string.c b/lib/string.c index c3ad055..09dfae0 100644 --- a/lib/string.c +++ b/lib/string.c @@ -21,14 +21,13 @@ #include <malloc.h> -#if 0 /* not used - was: #ifndef __HAVE_ARCH_STRNICMP */ /** - * strnicmp - Case insensitive, length-limited string comparison + * strncasecmp - Case insensitive, length-limited string comparison * @s1: One string * @s2: The other string * @len: the maximum number of characters to compare */ -int strnicmp(const char *s1, const char *s2, size_t len) +int strncasecmp(const char *s1, const char *s2, size_t len) { /* Yes, Virginia, it had better be unsigned */ unsigned char c1, c2; @@ -52,7 +51,16 @@ int strnicmp(const char *s1, const char *s2, size_t len) } return (int)c1 - (int)c2; } -#endif + +/** + * strcasecmp - Case insensitive string comparison + * @s1: One string + * @s2: The other string + */ +int strcasecmp(const char *s1, const char *s2) +{ + return strncasecmp(s1, s2, -1U); +} char * ___strtok; @@ -214,45 +222,6 @@ char * strrchr(const char * s, int c) } #endif - -/** - * skip_spaces - Removes leading whitespace from @str. - * @str: The string to be stripped. - * - * Returns a pointer to the first non-whitespace character in @str. - */ -char *skip_spaces(const char *str) -{ - while (isspace(*str)) - ++str; - return (char *)str; -} - -/** - * strim - Removes leading and trailing whitespace from @s. - * @s: The string to be stripped. - * - * Note that the first trailing whitespace is replaced with a %NUL-terminator - * in the given string @s. Returns a pointer to the first non-whitespace - * character in @s. - */ -char *strim(char *s) -{ - size_t size; - char *end; - - s = skip_spaces(s); - size = strlen(s); - if (!size) - return s; - - end = s + size - 1; - while (end >= s && isspace(*end)) - end--; - *(end + 1) = '\0'; - - return s; -} #ifndef __HAVE_ARCH_STRLEN /** * strlen - Find the length of a string diff --git a/lib/vsprintf.c b/lib/vsprintf.c index b7a79c0..3c432f8 100644 --- a/lib/vsprintf.c +++ b/lib/vsprintf.c @@ -103,7 +103,7 @@ long simple_strtol(const char *cp, char **endp, unsigned int base) return simple_strtoul(cp, endp, base); } -int ustrtoul(const char *cp, char **endp, unsigned int base) +unsigned long ustrtoul(const char *cp, char **endp, unsigned int base) { unsigned long result = simple_strtoul(cp, endp, base); switch (**endp) { diff --git a/net/link_local.c b/net/link_local.c index d52f13a..1ba796e 100644 --- a/net/link_local.c +++ b/net/link_local.c @@ -103,7 +103,7 @@ static void configure_wait(void) void link_local_start(void) { ip = getenv_IPaddr("llipaddr"); - if (ip != 0 && (ip & IN_CLASSB_NET) != LINKLOCAL_ADDR) { + if (ip != 0 && (ntohl(ip) & IN_CLASSB_NET) != LINKLOCAL_ADDR) { puts("invalid link address"); net_set_state(NETLOOP_FAIL); return; @@ -82,6 +82,7 @@ #include <common.h> #include <command.h> +#include <environment.h> #include <net.h> #if defined(CONFIG_STATUS_LED) #include <miiphy.h> @@ -208,32 +209,46 @@ static int NetTryCount; /**********************************************************************/ +static int on_bootfile(const char *name, const char *value, enum env_op op, + int flags) +{ + switch (op) { + case env_op_create: + case env_op_overwrite: + copy_filename(BootFile, value, sizeof(BootFile)); + break; + default: + break; + } + + return 0; +} +U_BOOT_ENV_CALLBACK(bootfile, on_bootfile); + /* * Check if autoload is enabled. If so, use either NFS or TFTP to download * the boot file. */ void net_auto_load(void) { +#if defined(CONFIG_CMD_NFS) const char *s = getenv("autoload"); - if (s != NULL) { - if (*s == 'n') { - /* - * Just use BOOTP/RARP to configure system; - * Do not use TFTP to load the bootfile. - */ - net_set_state(NETLOOP_SUCCESS); - return; - } -#if defined(CONFIG_CMD_NFS) - if (strcmp(s, "NFS") == 0) { - /* - * Use NFS to load the bootfile. - */ - NfsStart(); - return; - } + if (s != NULL && strcmp(s, "NFS") == 0) { + /* + * Use NFS to load the bootfile. + */ + NfsStart(); + return; + } #endif + if (getenv_yesno("autoload") == 0) { + /* + * Just use BOOTP/RARP to configure system; + * Do not use TFTP to load the bootfile. + */ + net_set_state(NETLOOP_SUCCESS); + return; } TftpStart(TFTPGET); } @@ -40,6 +40,7 @@ static ulong TftpTimeoutMSecs = TIMEOUT; static int TftpTimeoutCountMax = TIMEOUT_COUNT; +static ulong time_start; /* Record time we started tftp */ /* * These globals govern the timeout behavior when attempting a connection to a @@ -299,6 +300,12 @@ static void tftp_complete(void) TftpNumchars++; } #endif + time_start = get_timer(time_start); + if (time_start > 0) { + puts("\n\t "); /* Line up with "Loading: " */ + print_size(NetBootFileXferSize / + time_start * 1000, "/s"); + } puts("\ndone\n"); net_set_state(NETLOOP_SUCCESS); } @@ -775,6 +782,7 @@ void TftpStart(enum proto_t protocol) TftpState = STATE_SEND_RRQ; } + time_start = get_timer(0); TftpTimeoutCountMax = TftpRRQTimeoutCountMax; NetSetTimeout(TftpTimeoutMSecs, TftpTimeout); diff --git a/tools/env/Makefile b/tools/env/Makefile index ab73c8c..0e798e0 100644 --- a/tools/env/Makefile +++ b/tools/env/Makefile @@ -24,12 +24,15 @@ include $(TOPDIR)/config.mk HOSTSRCS := $(SRCTREE)/lib/crc32.c fw_env.c fw_env_main.c +HOSTSRCS += $(SRCTREE)/lib/ctype.c $(SRCTREE)/lib/linux_string.c +HOSTSRCS += $(SRCTREE)/common/env_attr.c $(SRCTREE)/common/env_flags.c HEADERS := fw_env.h $(OBJTREE)/include/config.h # Compile for a hosted environment on the target HOSTCPPFLAGS = -idirafter $(SRCTREE)/include \ -idirafter $(OBJTREE)/include2 \ -idirafter $(OBJTREE)/include \ + -idirafter $(SRCTREE)/tools/env \ -DUSE_HOSTCC \ -DTEXT_BASE=$(TEXT_BASE) diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c index 9b023e8..90c7a5d 100644 --- a/tools/env/fw_env.c +++ b/tools/env/fw_env.c @@ -25,6 +25,7 @@ */ #include <errno.h> +#include <env_flags.h> #include <fcntl.h> #include <linux/stringify.h> #include <stdio.h> @@ -181,6 +182,32 @@ char *fw_getenv (char *name) } /* + * Search the default environment for a variable. + * Return the value, if found, or NULL, if not found. + */ +char *fw_getdefenv(char *name) +{ + char *env, *nxt; + + for (env = default_environment; *env; env = nxt + 1) { + char *val; + + for (nxt = env; *nxt; ++nxt) { + if (nxt >= &default_environment[ENV_SIZE]) { + fprintf(stderr, "## Error: " + "default environment not terminated\n"); + return NULL; + } + } + val = envmatch(name, env); + if (!val) + continue; + return val; + } + return NULL; +} + +/* * Print the current definition of one, or more, or all * environment variables */ @@ -281,6 +308,7 @@ int fw_env_write(char *name, char *value) int len; char *env, *nxt; char *oldval = NULL; + int deleting, creating, overwriting; /* * search if variable with this name already exists @@ -298,27 +326,49 @@ int fw_env_write(char *name, char *value) break; } - /* - * Delete any existing definition - */ - if (oldval) { -#ifndef CONFIG_ENV_OVERWRITE - /* - * Ethernet Address and serial# can be set only once - */ - if ( - (strcmp(name, "serial#") == 0) || - ((strcmp(name, "ethaddr") == 0) -#if defined(CONFIG_OVERWRITE_ETHADDR_ONCE) && defined(CONFIG_ETHADDR) - && (strcmp(oldval, __stringify(CONFIG_ETHADDR)) != 0) -#endif /* CONFIG_OVERWRITE_ETHADDR_ONCE && CONFIG_ETHADDR */ - ) ) { - fprintf (stderr, "Can't overwrite \"%s\"\n", name); + deleting = (oldval && !(value && strlen(value))); + creating = (!oldval && (value && strlen(value))); + overwriting = (oldval && (value && strlen(value))); + + /* check for permission */ + if (deleting) { + if (env_flags_validate_varaccess(name, + ENV_FLAGS_VARACCESS_PREVENT_DELETE)) { + printf("Can't delete \"%s\"\n", name); + errno = EROFS; + return -1; + } + } else if (overwriting) { + if (env_flags_validate_varaccess(name, + ENV_FLAGS_VARACCESS_PREVENT_OVERWR)) { + printf("Can't overwrite \"%s\"\n", name); + errno = EROFS; + return -1; + } else if (env_flags_validate_varaccess(name, + ENV_FLAGS_VARACCESS_PREVENT_NONDEF_OVERWR)) { + const char *defval = fw_getdefenv(name); + + if (defval == NULL) + defval = ""; + if (strcmp(oldval, defval) + != 0) { + printf("Can't overwrite \"%s\"\n", name); + errno = EROFS; + return -1; + } + } + } else if (creating) { + if (env_flags_validate_varaccess(name, + ENV_FLAGS_VARACCESS_PREVENT_CREATE)) { + printf("Can't create \"%s\"\n", name); errno = EROFS; return -1; } -#endif /* CONFIG_ENV_OVERWRITE */ + } else + /* Nothing to do */ + return 0; + if (deleting || overwriting) { if (*++nxt == '\0') { *env = '\0'; } else { @@ -395,6 +445,9 @@ int fw_setenv(int argc, char *argv[]) name = argv[1]; + if (env_flags_validate_env_set_params(argc, argv) < 0) + return 1; + len = 0; for (i = 2; i < argc; ++i) { char *val = argv[i]; @@ -516,6 +569,11 @@ int fw_parse_script(char *fname) name, val ? val : " removed"); #endif + if (env_flags_validate_type(name, val) < 0) { + ret = -1; + break; + } + /* * If there is an error setting a variable, * try to save the environment and returns an error diff --git a/tools/fit_image.c b/tools/fit_image.c index ef9ffee..76bbba1 100644 --- a/tools/fit_image.c +++ b/tools/fit_image.c @@ -80,7 +80,7 @@ static int fit_handle_file (struct mkimage_params *params) } sprintf (tmpfile, "%s%s", params->imagefile, MKIMAGE_TMPFILE_SUFFIX); - /* dtc -I dts -O -p 200 datafile > tmpfile */ + /* dtc -I dts -O dtb -p 500 datafile > tmpfile */ sprintf (cmd, "%s %s %s > %s", MKIMAGE_DTC, params->dtc, params->datafile, tmpfile); debug ("Trying to execute \"%s\"\n", cmd); |