diff options
50 files changed, 1966 insertions, 56 deletions
diff --git a/arch/arm/cpu/armv7/s5p-common/cpu_info.c b/arch/arm/cpu/armv7/s5p-common/cpu_info.c index 154d674..764c661 100644 --- a/arch/arm/cpu/armv7/s5p-common/cpu_info.c +++ b/arch/arm/cpu/armv7/s5p-common/cpu_info.c @@ -5,9 +5,12 @@ * SPDX-License-Identifier: GPL-2.0+ */ #include <common.h> +#include <fdtdec.h> #include <asm/io.h> #include <asm/arch/clk.h> +DECLARE_GLOBAL_DATA_PTR; + /* Default is s5pc100 */ unsigned int s5p_cpu_id = 0xC100; /* Default is EVT1 */ @@ -30,7 +33,16 @@ u32 get_device_type(void) #ifdef CONFIG_DISPLAY_CPUINFO int print_cpuinfo(void) { - printf("CPU: %s%X @ ", s5p_get_cpu_name(), s5p_cpu_id); + const char *cpu_model; + int len; + + /* For SoC with no real CPU ID in naming convention. */ + cpu_model = fdt_getprop(gd->fdt_blob, 0, "cpu-model", &len); + if (cpu_model) + printf("CPU: %.*s @ ", len, cpu_model); + else + printf("CPU: %s%X @ ", s5p_get_cpu_name(), s5p_cpu_id); + print_freq(get_arm_clk(), "\n"); return 0; diff --git a/arch/arm/dts/exynos5422-odroidxu3.dts b/arch/arm/dts/exynos5422-odroidxu3.dts index d0a8621..690c747 100644 --- a/arch/arm/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/dts/exynos5422-odroidxu3.dts @@ -31,6 +31,18 @@ 0xb0000000 0xea00000>; }; + adc@12D10000 { + u-boot,dm-pre-reloc; + status = "okay"; + }; + + i2c@12CA0000 { + s2mps11_pmic@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; + }; + }; + ehci@12110000 { samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/dts/exynos54xx.dtsi b/arch/arm/dts/exynos54xx.dtsi index bd3619d..daa6a33 100644 --- a/arch/arm/dts/exynos54xx.dtsi +++ b/arch/arm/dts/exynos54xx.dtsi @@ -42,6 +42,13 @@ xhci1 = "/xhci@12400000"; }; + adc@12D10000 { + compatible = "samsung,exynos-adc-v2"; + reg = <0x12D10000 0x100>; + interrupts = <0 106 0>; + status = "disabled"; + }; + i2c@12CA0000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/dts/exynos5800-peach-pi.dts b/arch/arm/dts/exynos5800-peach-pi.dts index 1d7ff23..76826dc 100644 --- a/arch/arm/dts/exynos5800-peach-pi.dts +++ b/arch/arm/dts/exynos5800-peach-pi.dts @@ -12,6 +12,7 @@ / { model = "Samsung/Google Peach Pi board based on Exynos5800"; + cpu-model = "Exynos5800"; compatible = "google,pit-rev#", "google,pit", "google,peach", "samsung,exynos5800", "samsung,exynos5"; diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 18eadf5..3d31f9d 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -159,8 +159,8 @@ static int exynos_get_pll_clk(int pllreg, unsigned int r, unsigned int k) div = PLL_DIV_1024; else if (proid_is_exynos4412()) div = PLL_DIV_65535; - else if (proid_is_exynos5250() || proid_is_exynos5420() - || proid_is_exynos5800()) + else if (proid_is_exynos5250() || proid_is_exynos5420() || + proid_is_exynos5422()) div = PLL_DIV_65536; else return 0; @@ -346,7 +346,7 @@ static struct clk_bit_info *get_clk_bit_info(int peripheral) int i; struct clk_bit_info *info; - if (proid_is_exynos5420() || proid_is_exynos5800()) + if (proid_is_exynos5420() || proid_is_exynos5422()) info = exynos542x_bit_info; else info = exynos5_bit_info; @@ -558,7 +558,7 @@ static unsigned long exynos542x_get_periph_rate(int peripheral) unsigned long clock_get_periph_rate(int peripheral) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420() || proid_is_exynos5800()) + if (proid_is_exynos5420() || proid_is_exynos5422()) return exynos542x_get_periph_rate(peripheral); return exynos5_get_periph_rate(peripheral); } else { @@ -1576,7 +1576,7 @@ static unsigned long exynos4_get_i2c_clk(void) unsigned long get_pll_clk(int pllreg) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420() || proid_is_exynos5800()) + if (proid_is_exynos5420() || proid_is_exynos5422()) return exynos542x_get_pll_clk(pllreg); return exynos5_get_pll_clk(pllreg); } else if (cpu_is_exynos4()) { @@ -1692,7 +1692,7 @@ void set_mmc_clk(int dev_index, unsigned int div) div -= 1; if (cpu_is_exynos5()) { - if (proid_is_exynos5420() || proid_is_exynos5800()) + if (proid_is_exynos5420() || proid_is_exynos5422()) exynos5420_set_mmc_clk(dev_index, div); else exynos5_set_mmc_clk(dev_index, div); @@ -1708,7 +1708,7 @@ unsigned long get_lcd_clk(void) } else if (cpu_is_exynos5()) { if (proid_is_exynos5420()) return exynos5420_get_lcd_clk(); - else if (proid_is_exynos5800()) + else if (proid_is_exynos5422()) return exynos5800_get_lcd_clk(); else return exynos5_get_lcd_clk(); @@ -1740,7 +1740,7 @@ void set_mipi_clk(void) int set_spi_clk(int periph_id, unsigned int rate) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420() || proid_is_exynos5800()) + if (proid_is_exynos5420() || proid_is_exynos5422()) return exynos5420_set_spi_clk(periph_id, rate); return exynos5_set_spi_clk(periph_id, rate); } diff --git a/arch/arm/mach-exynos/clock_init_exynos5.c b/arch/arm/mach-exynos/clock_init_exynos5.c index 0200fd1..1b7498d 100644 --- a/arch/arm/mach-exynos/clock_init_exynos5.c +++ b/arch/arm/mach-exynos/clock_init_exynos5.c @@ -971,7 +971,7 @@ static void exynos5420_system_clock_init(void) void system_clock_init(void) { - if (proid_is_exynos5420() || proid_is_exynos5800()) + if (proid_is_exynos5420() || proid_is_exynos5422()) exynos5420_system_clock_init(); else exynos5250_system_clock_init(); diff --git a/arch/arm/mach-exynos/common_setup.h b/arch/arm/mach-exynos/common_setup.h index 67aac2d..2829fb2 100644 --- a/arch/arm/mach-exynos/common_setup.h +++ b/arch/arm/mach-exynos/common_setup.h @@ -78,7 +78,7 @@ static inline void configure_l2_ctlr(void) CACHE_TAG_RAM_LATENCY_2_CYCLES | CACHE_DATA_RAM_LATENCY_2_CYCLES; - if (proid_is_exynos5420() || proid_is_exynos5800()) { + if (proid_is_exynos5420() || proid_is_exynos5422()) { val |= CACHE_ECC_AND_PARITY | CACHE_TAG_RAM_LATENCY_3_CYCLES | CACHE_DATA_RAM_LATENCY_3_CYCLES; @@ -97,7 +97,7 @@ static inline void configure_l2_actlr(void) { uint32_t val; - if (proid_is_exynos5420() || proid_is_exynos5800()) { + if (proid_is_exynos5420() || proid_is_exynos5422()) { mrc_l2_aux_ctlr(val); val |= CACHE_ENABLE_FORCE_L2_LOGIC | CACHE_DISABLE_CLEAN_EVICT; diff --git a/arch/arm/mach-exynos/dmc_init_ddr3.c b/arch/arm/mach-exynos/dmc_init_ddr3.c index 7c0b12a..25a9df9 100644 --- a/arch/arm/mach-exynos/dmc_init_ddr3.c +++ b/arch/arm/mach-exynos/dmc_init_ddr3.c @@ -20,8 +20,8 @@ #define TIMEOUT_US 10000 #define NUM_BYTE_LANES 4 #define DEFAULT_DQS 8 -#define DEFAULT_DQS_X4 (DEFAULT_DQS << 24) || (DEFAULT_DQS << 16) \ - || (DEFAULT_DQS << 8) || (DEFAULT_DQS << 0) +#define DEFAULT_DQS_X4 ((DEFAULT_DQS << 24) || (DEFAULT_DQS << 16) \ + || (DEFAULT_DQS << 8) || (DEFAULT_DQS << 0)) #ifdef CONFIG_EXYNOS5250 static void reset_phy_ctrl(void) @@ -856,10 +856,10 @@ int ddr3_mem_ctrl_init(struct mem_timings *mem, int reset) */ val = readl(&drex0->concontrol); val |= CONCONTROL_UPDATE_MODE; - writel(val , &drex0->concontrol); + writel(val, &drex0->concontrol); val = readl(&drex1->concontrol); val |= CONCONTROL_UPDATE_MODE; - writel(val , &drex1->concontrol); + writel(val, &drex1->concontrol); return 0; } diff --git a/arch/arm/mach-exynos/include/mach/adc.h b/arch/arm/mach-exynos/include/mach/adc.h index a0e26d7..9af51ab 100644 --- a/arch/arm/mach-exynos/include/mach/adc.h +++ b/arch/arm/mach-exynos/include/mach/adc.h @@ -9,6 +9,39 @@ #ifndef __ASM_ARM_ARCH_ADC_H_ #define __ASM_ARM_ARCH_ADC_H_ +#define ADC_V2_CON1_SOFT_RESET (0x2 << 1) +#define ADC_V2_CON1_STC_EN 0x1 + +#define ADC_V2_CON2_OSEL(x) (((x) & 0x1) << 10) +#define OSEL_2S 0x0 +#define OSEL_BINARY 0x1 +#define ADC_V2_CON2_ESEL(x) (((x) & 0x1) << 9) +#define ESEL_ADC_EVAL_TIME_40CLK 0x0 +#define ESEL_ADC_EVAL_TIME_20CLK 0x1 +#define ADC_V2_CON2_HIGHF(x) (((x) & 0x1) << 8) +#define HIGHF_CONV_RATE_30KSPS 0x0 +#define HIGHF_CONV_RATE_600KSPS 0x1 +#define ADC_V2_CON2_C_TIME(x) (((x) & 0x7) << 4) +#define ADC_V2_CON2_CHAN_SEL_MASK 0xf +#define ADC_V2_CON2_CHAN_SEL(x) ((x) & ADC_V2_CON2_CHAN_SEL_MASK) + +#define ADC_V2_GET_STATUS_FLAG(x) (((x) >> 2) & 0x1) +#define FLAG_CONV_END 0x1 + +#define ADC_V2_INT_DISABLE 0x0 +#define ADC_V2_INT_ENABLE 0x1 +#define INT_NOT_GENERATED 0x0 +#define INT_GENERATED 0x1 + +#define ADC_V2_VERSION 0x80000008 + +#define ADC_V2_MAX_CHANNEL 9 + +/* For default 8 time convertion with sample rate 600 kSPS - 15us timeout */ +#define ADC_V2_CONV_TIMEOUT_US 15 + +#define ADC_V2_DAT_MASK 0xfff + #ifndef __ASSEMBLY__ struct s5p_adc { unsigned int adccon; @@ -21,6 +54,17 @@ struct s5p_adc { unsigned int adcmux; unsigned int adcclrintpndnup; }; + +struct exynos_adc_v2 { + unsigned int con1; + unsigned int con2; + unsigned int status; + unsigned int dat; + unsigned int int_en; + unsigned int int_status; + unsigned int reserved[2]; + unsigned int version; +}; #endif #endif /* __ASM_ARM_ARCH_ADC_H_ */ diff --git a/arch/arm/mach-exynos/include/mach/cpu.h b/arch/arm/mach-exynos/include/mach/cpu.h index cb3d2cc..14a1692 100644 --- a/arch/arm/mach-exynos/include/mach/cpu.h +++ b/arch/arm/mach-exynos/include/mach/cpu.h @@ -237,7 +237,7 @@ static inline void s5p_set_cpu_id(void) * Exynos5800 is a variant of Exynos5420 * and has product id 0x5422 */ - s5p_cpu_id = 0x5800; + s5p_cpu_id = 0x5422; break; } } @@ -267,7 +267,7 @@ IS_EXYNOS_TYPE(exynos4210, 0x4210) IS_EXYNOS_TYPE(exynos4412, 0x4412) IS_EXYNOS_TYPE(exynos5250, 0x5250) IS_EXYNOS_TYPE(exynos5420, 0x5420) -IS_EXYNOS_TYPE(exynos5800, 0x5800) +IS_EXYNOS_TYPE(exynos5422, 0x5422) #define SAMSUNG_BASE(device, base) \ static inline unsigned int __attribute__((no_instrument_function)) \ @@ -278,7 +278,7 @@ static inline unsigned int __attribute__((no_instrument_function)) \ return EXYNOS4X12_##base; \ return EXYNOS4_##base; \ } else if (cpu_is_exynos5()) { \ - if (proid_is_exynos5420() || proid_is_exynos5800()) \ + if (proid_is_exynos5420() || proid_is_exynos5422()) \ return EXYNOS5420_##base; \ return EXYNOS5_##base; \ } \ diff --git a/arch/arm/mach-exynos/include/mach/gpio.h b/arch/arm/mach-exynos/include/mach/gpio.h index 9699954..7fc8e61 100644 --- a/arch/arm/mach-exynos/include/mach/gpio.h +++ b/arch/arm/mach-exynos/include/mach/gpio.h @@ -1398,7 +1398,7 @@ static struct gpio_info exynos5420_gpio_data[EXYNOS5420_GPIO_NUM_PARTS] = { static inline struct gpio_info *get_gpio_data(void) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420() || proid_is_exynos5800()) + if (proid_is_exynos5420() || proid_is_exynos5422()) return exynos5420_gpio_data; else return exynos5_gpio_data; @@ -1415,7 +1415,7 @@ static inline struct gpio_info *get_gpio_data(void) static inline unsigned int get_bank_num(void) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420() || proid_is_exynos5800()) + if (proid_is_exynos5420() || proid_is_exynos5422()) return EXYNOS5420_GPIO_NUM_PARTS; else return EXYNOS5_GPIO_NUM_PARTS; diff --git a/arch/arm/mach-exynos/pinmux.c b/arch/arm/mach-exynos/pinmux.c index 179b294..12eb79c 100644 --- a/arch/arm/mach-exynos/pinmux.c +++ b/arch/arm/mach-exynos/pinmux.c @@ -737,10 +737,10 @@ static int exynos4x12_mmc_config(int peripheral, int flags) return -1; } for (i = start; i < (start + 7); i++) { + gpio_set_pull(i, S5P_GPIO_PULL_NONE); if (i == (start + 2)) continue; gpio_cfg_pin(i, func); - gpio_set_pull(i, S5P_GPIO_PULL_NONE); gpio_set_drv(i, S5P_GPIO_DRV_4X); } if (flags & PINMUX_FLAG_8BIT_MODE) { @@ -858,7 +858,7 @@ static int exynos4x12_pinmux_config(int peripheral, int flags) int exynos_pinmux_config(int peripheral, int flags) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420() || proid_is_exynos5800()) + if (proid_is_exynos5420() || proid_is_exynos5422()) return exynos5420_pinmux_config(peripheral, flags); else if (proid_is_exynos5250()) return exynos5_pinmux_config(peripheral, flags); diff --git a/arch/arm/mach-exynos/power.c b/arch/arm/mach-exynos/power.c index 1b12051..cd2d661 100644 --- a/arch/arm/mach-exynos/power.c +++ b/arch/arm/mach-exynos/power.c @@ -125,7 +125,7 @@ static void exynos5420_set_usbdev_phy_ctrl(unsigned int enable) void set_usbdrd_phy_ctrl(unsigned int enable) { if (cpu_is_exynos5()) { - if (proid_is_exynos5420() || proid_is_exynos5800()) + if (proid_is_exynos5420() || proid_is_exynos5422()) exynos5420_set_usbdev_phy_ctrl(enable); else exynos5_set_usbdrd_phy_ctrl(enable); diff --git a/arch/sandbox/dts/sandbox_pmic.dtsi b/arch/sandbox/dts/sandbox_pmic.dtsi index 44a26b1..ce261b9 100644 --- a/arch/sandbox/dts/sandbox_pmic.dtsi +++ b/arch/sandbox/dts/sandbox_pmic.dtsi @@ -55,7 +55,7 @@ regulator-always-on; }; - buck2 { + buck2: buck2 { regulator-name = "SUPPLY_3.3V"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; diff --git a/arch/sandbox/dts/test.dts b/arch/sandbox/dts/test.dts index 730de8a..e2c4971 100644 --- a/arch/sandbox/dts/test.dts +++ b/arch/sandbox/dts/test.dts @@ -189,6 +189,12 @@ }; }; + adc@0 { + compatible = "sandbox,adc"; + vdd-supply = <&buck2>; + vss-microvolts = <0>; + }; + leds { compatible = "gpio-leds"; diff --git a/board/samsung/common/Makefile b/board/samsung/common/Makefile index 6cbd906..ef1a8f3 100644 --- a/board/samsung/common/Makefile +++ b/board/samsung/common/Makefile @@ -11,5 +11,8 @@ obj-$(CONFIG_MISC_COMMON) += misc.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_BOARD_COMMON) += board.o -obj-$(CONFIG_EXYNOS5_DT) += exynos5-dt.o +ifdef CONFIG_EXYNOS5_DT +obj-y += exynos5-dt.o +obj-$(CONFIG_BOARD_TYPES) += exynos5-dt-types.o +endif endif diff --git a/board/samsung/common/board.c b/board/samsung/common/board.c index d32c75d..1334c22 100644 --- a/board/samsung/common/board.c +++ b/board/samsung/common/board.c @@ -304,8 +304,8 @@ int checkboard(void) printf("Board: %s\n", board_info ? board_info : "unknown"); #ifdef CONFIG_BOARD_TYPES board_info = get_board_type(); - - printf("Model: %s\n", board_info ? board_info : "unknown"); + if (board_info) + printf("Type: %s\n", board_info); #endif return 0; } diff --git a/board/samsung/common/exynos5-dt-types.c b/board/samsung/common/exynos5-dt-types.c new file mode 100644 index 0000000..48fd1f7 --- /dev/null +++ b/board/samsung/common/exynos5-dt-types.c @@ -0,0 +1,196 @@ +/* + * Copyright (C) 2015 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <adc.h> +#include <dm.h> +#include <errno.h> +#include <fdtdec.h> +#include <power/pmic.h> +#include <power/regulator.h> +#include <power/s2mps11.h> +#include <samsung/exynos5-dt-types.h> +#include <samsung/misc.h> + +DECLARE_GLOBAL_DATA_PTR; + +static const struct udevice_id board_ids[] = { + { .compatible = "samsung,odroidxu3", .data = EXYNOS5_BOARD_ODROID_XU3 }, + { .compatible = "samsung,exynos5", .data = EXYNOS5_BOARD_GENERIC }, + { }, +}; + +/** + * Odroix XU3/4 board revisions: + * Rev ADCmax Board + * 0.1 0 XU3 0.1 + * 0.2 410 XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / INA231) + * 0.3 1408 XU4 0.1 + * Use +10 % for ADC value tolerance. + */ +struct odroid_rev_info odroid_info[] = { + { EXYNOS5_BOARD_ODROID_XU3_REV01, 1, 10, "xu3" }, + { EXYNOS5_BOARD_ODROID_XU3_REV02, 2, 410, "xu3" }, + { EXYNOS5_BOARD_ODROID_XU4_REV01, 1, 1408, "xu4" }, + { EXYNOS5_BOARD_ODROID_UNKNOWN, 0, 4095, "unknown" }, +}; + +static unsigned int odroid_get_rev(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) { + if (odroid_info[i].board_type == gd->board_type) + return odroid_info[i].board_rev; + } + + return 0; +} + +static int odroid_get_board_type(void) +{ + unsigned int adcval; + int ret, i; + + ret = adc_channel_single_shot("adc", CONFIG_ODROID_REV_AIN, &adcval); + if (ret) + goto rev_default; + + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) { + /* ADC tolerance: +20 % */ + if (adcval < odroid_info[i].adc_val) + return odroid_info[i].board_type; + } + +rev_default: + return EXYNOS5_BOARD_ODROID_XU3; +} + +/** + * odroid_get_type_str - returns pointer to one of the board type string. + * Board types: "xu3", "xu3-lite", "xu4". However the "xu3lite" can be + * detected only when the i2c controller is ready to use. Fortunately, + * XU3 and XU3L are compatible, and the information about board lite + * revision is needed before booting the linux, to set proper environment + * variable: $fdtfile. + */ +static const char *odroid_get_type_str(void) +{ + const char *type_xu3l = "xu3-lite"; + struct udevice *dev, *chip; + int i, ret; + + if (gd->board_type != EXYNOS5_BOARD_ODROID_XU3_REV02) + goto exit; + + ret = pmic_get("s2mps11", &dev); + if (ret) + goto exit; + + /* Enable LDO26: 3.0V */ + ret = pmic_reg_write(dev, S2MPS11_REG_L26CTRL, + S2MPS11_LDO26_ENABLE); + if (ret) + goto exit; + + /* Check XU3Lite by probe INA231 I2C0:0x40 */ + ret = uclass_get_device(UCLASS_I2C, 0, &dev); + if (ret) + goto exit; + + ret = dm_i2c_probe(dev, 0x40, 0x0, &chip); + if (ret) + return type_xu3l; + +exit: + for (i = 0; i < ARRAY_SIZE(odroid_info); i++) { + if (odroid_info[i].board_type == gd->board_type) + return odroid_info[i].name; + } + + return NULL; +} + +bool board_is_odroidxu3(void) +{ + if (gd->board_type >= EXYNOS5_BOARD_ODROID_XU3 && + gd->board_type <= EXYNOS5_BOARD_ODROID_XU3_REV02) + return true; + + return false; +} + +bool board_is_odroidxu4(void) +{ + if (gd->board_type == EXYNOS5_BOARD_ODROID_XU4_REV01) + return true; + + return false; +} + +bool board_is_generic(void) +{ + if (gd->board_type == EXYNOS5_BOARD_GENERIC) + return true; + + return false; +} + +/** + * get_board_rev() - return detected board revision. + * + * @return: return board revision number for XU3 or 0 for generic + */ +u32 get_board_rev(void) +{ + if (board_is_generic()) + return 0; + + return odroid_get_rev(); +} + +/** + * get_board_type() - returns board type string. + * + * @return: return board type string for XU3 or empty string for generic + */ +const char *get_board_type(void) +{ + const char *generic = ""; + + if (board_is_generic()) + return generic; + + return odroid_get_type_str(); +} + +/** + * set_board_type() - set board type in gd->board_type. + * As default type set EXYNOS5_BOARD_GENERIC, if detect Odroid, + * then set its proper type. + */ +void set_board_type(void) +{ + const struct udevice_id *of_match = board_ids; + int ret; + + gd->board_type = EXYNOS5_BOARD_GENERIC; + + while (of_match->compatible) { + ret = fdt_node_check_compatible(gd->fdt_blob, 0, + of_match->compatible); + if (ret) + of_match++; + + gd->board_type = of_match->data; + break; + } + + /* If Odroid, then check its revision */ + if (board_is_odroidxu3()) + gd->board_type = odroid_get_board_type(); +} diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c index 4250f72..4d9e151 100644 --- a/board/samsung/common/exynos5-dt.c +++ b/board/samsung/common/exynos5-dt.c @@ -27,7 +27,10 @@ #include <power/pmic.h> #include <power/max77686_pmic.h> #include <power/regulator.h> +#include <power/s2mps11.h> #include <power/s5m8767.h> +#include <samsung/exynos5-dt-types.h> +#include <samsung/misc.h> #include <tmu.h> DECLARE_GLOBAL_DATA_PTR; @@ -335,15 +338,24 @@ int board_usb_init(int index, enum usb_init_type init) #ifdef CONFIG_SET_DFU_ALT_INFO char *get_dfu_alt_system(char *interface, char *devstr) { + char *info = "Not supported!"; + + if (board_is_odroidxu4()) + return info; + return getenv("dfu_alt_system"); } char *get_dfu_alt_boot(char *interface, char *devstr) { + char *info = "Not supported!"; struct mmc *mmc; char *alt_boot; int dev_num; + if (board_is_odroidxu4()) + return info; + dev_num = simple_strtoul(devstr, NULL, 10); mmc = find_mmc_device(dev_num); diff --git a/board/samsung/common/misc.c b/board/samsung/common/misc.c index e0e2c48..da0d4db 100644 --- a/board/samsung/common/misc.c +++ b/board/samsung/common/misc.c @@ -85,6 +85,9 @@ void set_board_info(void) #ifdef CONFIG_BOARD_TYPES bdtype = get_board_type(); + if (!bdtype) + bdtype = ""; + sprintf(info, "%s%s", bdname, bdtype); setenv("boardname", info); #endif @@ -256,9 +259,9 @@ static int mode_leave_menu(int mode) cmd = find_cmd(mode_name[mode][1]); if (cmd) { printf("Enter: %s %s\n", mode_name[mode][0], - mode_info[mode]); + mode_info[mode]); lcd_printf("\n\n\t%s %s\n", mode_name[mode][0], - mode_info[mode]); + mode_info[mode]); lcd_puts("\n\tDo not turn off device before finish!\n"); cmd_result = run_command(mode_cmd[mode], 0); @@ -315,8 +318,7 @@ static void display_download_menu(int mode) for (i = 0; i <= BOOT_MODE_EXIT; i++) lcd_printf("\t%s %s - %s\n\n", selection[i], - mode_name[i][0], - mode_info[i]); + mode_name[i][0], mode_info[i]); } static void download_menu(void) diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c index 32155f1..36d493d 100644 --- a/board/samsung/odroid/odroid.c +++ b/board/samsung/odroid/odroid.c @@ -33,13 +33,6 @@ enum { ODROID_TYPES, }; -static const char *mmc_regulators[] = { - "VDDQ_EMMC_1.8V", - "VDDQ_EMMC_2.8V", - "TFLASH_2.8V", - NULL, -}; - void set_board_type(void) { /* Set GPA1 pin 1 to HI - enable XCL205 output */ @@ -428,6 +421,13 @@ int exynos_init(void) int exynos_power_init(void) { + const char *mmc_regulators[] = { + "VDDQ_EMMC_1.8V", + "VDDQ_EMMC_2.8V", + "TFLASH_2.8V", + NULL, + }; + if (regulator_list_autoset(mmc_regulators, NULL, true)) error("Unable to init all mmc regulators"); @@ -450,7 +450,6 @@ static int s5pc210_phy_control(int on) return regulator_set_mode(dev, OPMODE_ON); else return regulator_set_mode(dev, OPMODE_LPM); - } struct s3c_plat_otg_data s5pc210_otg_data = { diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c index b75a0e3..6e678c7 100644 --- a/board/samsung/smdk2410/smdk2410.c +++ b/board/samsung/smdk2410/smdk2410.c @@ -18,11 +18,11 @@ DECLARE_GLOBAL_DATA_PTR; #define FCLK_SPEED 1 -#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */ +#if (FCLK_SPEED == 0) /* Fout = 203MHz, Fin = 12MHz for Audio */ #define M_MDIV 0xC3 #define M_PDIV 0x4 #define M_SDIV 0x1 -#elif FCLK_SPEED==1 /* Fout = 202.8MHz */ +#elif (FCLK_SPEED == 1) /* Fout = 202.8MHz */ #define M_MDIV 0xA1 #define M_PDIV 0x3 #define M_SDIV 0x1 @@ -30,11 +30,11 @@ DECLARE_GLOBAL_DATA_PTR; #define USB_CLOCK 1 -#if USB_CLOCK==0 +#if (USB_CLOCK == 0) #define U_M_MDIV 0xA1 #define U_M_PDIV 0x3 #define U_M_SDIV 0x1 -#elif USB_CLOCK==1 +#elif (USB_CLOCK == 1) #define U_M_MDIV 0x48 #define U_M_PDIV 0x3 #define U_M_SDIV 0x2 @@ -44,7 +44,7 @@ static inline void pll_delay(unsigned long loops) { __asm__ volatile ("1:\n" "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); + "bne 1b" : "=r" (loops) : "0" (loops)); } /* diff --git a/board/samsung/smdkv310/smdkv310.c b/board/samsung/smdkv310/smdkv310.c index cb7f9b0..fc0e8d2 100644 --- a/board/samsung/smdkv310/smdkv310.c +++ b/board/samsung/smdkv310/smdkv310.c @@ -55,16 +55,16 @@ int dram_init(void) void dram_init_banksize(void) { gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, \ + gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); gd->bd->bi_dram[1].start = PHYS_SDRAM_2; - gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, \ + gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE); gd->bd->bi_dram[2].start = PHYS_SDRAM_3; - gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, \ + gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE); gd->bd->bi_dram[3].start = PHYS_SDRAM_4; - gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, \ + gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE); } diff --git a/configs/odroid-xu3_defconfig b/configs/odroid-xu3_defconfig index 479af9e..4ab91fa 100644 --- a/configs/odroid-xu3_defconfig +++ b/configs/odroid-xu3_defconfig @@ -9,7 +9,12 @@ CONFIG_SYS_PROMPT="ODROID-XU3 # " # CONFIG_CMD_SETEXPR is not set CONFIG_DM_I2C_COMPAT=y CONFIG_DM_PMIC=y +CONFIG_CMD_PMIC=y +CONFIG_ERRNO_STR=y CONFIG_DM_REGULATOR=y +CONFIG_PMIC_S2MPS11=y CONFIG_USB=y CONFIG_DM_USB=y CONFIG_VIDEO_BRIDGE=y +CONFIG_ADC=y +CONFIG_ADC_EXYNOS=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index 67ae99b..94c8e68 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -65,3 +65,5 @@ CONFIG_UT_DM=y CONFIG_UT_ENV=y CONFIG_REMOTEPROC_SANDBOX=y CONFIG_CMD_REMOTEPROC=y +CONFIG_ADC=y +CONFIG_ADC_SANDBOX=y diff --git a/doc/device-tree-bindings/adc/adc.txt b/doc/device-tree-bindings/adc/adc.txt new file mode 100644 index 0000000..463de3c --- /dev/null +++ b/doc/device-tree-bindings/adc/adc.txt @@ -0,0 +1,62 @@ +ADC device binding + +There are no mandatory properties for ADC. However, if Voltage info is required, +then there are two options: +- use microvolts constraint or +- use regulator phandle to enable/read supply's Voltage + +Properties and constraints: +*optional and always checked, Voltage polarity info: +- vdd-polarity-negative: positive reference Voltage has a negative polarity +- vss-polarity-negative: negative reference Voltage has a negative polarity + +Chose one option, for each supply (Vdd/Vss): + +*optional and always checked, supply Voltage constants: +- vdd-supply: phandle to Vdd regulator's node +- vss-supply: phandle to Vss regulator's node + +*optional and checked only if the above corresponding, doesn't exist: +- vdd-microvolts: positive reference Voltage value [uV] +- vss-microvolts: negative reference Voltage value [uV] + +Example with constant 'Vdd' value: +adc@1000000 { + compatible = "some-adc"; + reg = <0xaabb000 0x100>; + status = "enabled"; + vdd-microvolts = <1800000>; +}; + +Example of supply phandle usage, for the ADC's VDD/VSS references as below: + _______ _______ + |Sandbox| |Sandbox| + : PMIC : : ADC : + . . . . + | | (Vdd) | AIN0|--> + | BUCK2|-------|VDDref | + | (3.3V)| _|VSSref | + |_______| | |_______| + _|_ + +For the above PMIC, the node can be defined as follows: +sandbox_pmic { + compatible = "sandbox,pmic"; + ... + buck2: buck2 { + regulator-name = "SUPPLY_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + ... +}; + +For the above ADC, the node can be defined as follows: +adc@0 { + compatible = "sandbox,adc"; + vdd-supply = <&buck2>; + vss-microvolts = <0>; +}; + +The ADC uclass code, will enable the supply before start of the conversion, +but it will not configure the regulator settings. diff --git a/doc/device-tree-bindings/exynos/soc.txt b/doc/device-tree-bindings/exynos/soc.txt new file mode 100644 index 0000000..9ba6f3b --- /dev/null +++ b/doc/device-tree-bindings/exynos/soc.txt @@ -0,0 +1,21 @@ +Exynos SoC model + +The "cpu-model" property is a non-standard extension for the device tree root +node. Since the cpu id of some Exynos variants does not correspond to product +name, this property fills the gap. + +For almost all Exynos based boards in the kernel, the product name corresponds +to the device tree file name. The same name is generated in U-Boot, so the new +property allows doing it automatically. + +Required properties: + - cpu-model : Exynos product name + +Example: + +/ { + model = "Samsung/Google Peach Pi board based on Exynos5800"; + cpu-model = "Exynos5800"; + + compatible = ... +}; diff --git a/doc/device-tree-bindings/pmic/s2mps11.txt b/doc/device-tree-bindings/pmic/s2mps11.txt new file mode 100644 index 0000000..422f14f --- /dev/null +++ b/doc/device-tree-bindings/pmic/s2mps11.txt @@ -0,0 +1,17 @@ +SAMSUNG, S2MPS11 PMIC + +This file describes the binding info for the PMIC driver: +- drivers/power/pmic/s2mps11.c + +Required properties: +- compatible: "samsung,s2mps11-pmic" +- reg = 0x66 + +With those two properties, the pmic device can be used for read/write only. + +Example: + +s2mps11@66 { + compatible = "samsung,s2mps11-pmic"; + reg = <0x66>; +}; diff --git a/drivers/Kconfig b/drivers/Kconfig index ba88b5e..c481e93 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -4,6 +4,8 @@ source "drivers/core/Kconfig" # types of drivers sorted in alphabetical order +source "drivers/adc/Kconfig" + source "drivers/block/Kconfig" source "drivers/clk/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 4f49bfd..ad29a4f 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -35,6 +35,7 @@ obj-$(CONFIG_SPL_SATA_SUPPORT) += block/ else +obj-y += adc/ obj-$(CONFIG_DM_DEMO) += demo/ obj-$(CONFIG_BIOSEMU) += bios_emulator/ obj-y += block/ diff --git a/drivers/adc/Kconfig b/drivers/adc/Kconfig new file mode 100644 index 0000000..e5335f7 --- /dev/null +++ b/drivers/adc/Kconfig @@ -0,0 +1,30 @@ +config ADC + bool "Enable ADC drivers using Driver Model" + help + This enables ADC API for drivers, which allows driving ADC features + by single and multi-channel methods for: + - start/stop/get data for conversion of a single-channel selected by + a number or multi-channels selected by a bitmask + - get data mask (ADC resolution) + ADC reference Voltage supply options: + - methods for get Vdd/Vss reference Voltage values with polarity + - support supply's phandle with auto-enable + - supply polarity setting in fdt + +config ADC_EXYNOS + bool "Enable Exynos 54xx ADC driver" + help + This enables basic driver for Exynos ADC compatible with Exynos54xx. + It provides: + - 10 analog input channels + - 12-bit resolution + - 600 KSPS of sample rate + +config ADC_SANDBOX + bool "Enable Sandbox ADC test driver" + help + This enables driver for Sandbox ADC device emulation. + It provides: + - 4 analog input channels + - 16-bit resolution + - single and multi-channel conversion mode diff --git a/drivers/adc/Makefile b/drivers/adc/Makefile new file mode 100644 index 0000000..cebf26d --- /dev/null +++ b/drivers/adc/Makefile @@ -0,0 +1,10 @@ +# +# Copyright (C) 2015 Samsung Electronics +# Przemyslaw Marczak <p.marczak@samsung.com> +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-$(CONFIG_ADC) += adc-uclass.o +obj-$(CONFIG_ADC_EXYNOS) += exynos-adc.o +obj-$(CONFIG_ADC_SANDBOX) += sandbox.o diff --git a/drivers/adc/adc-uclass.c b/drivers/adc/adc-uclass.c new file mode 100644 index 0000000..9233fcd --- /dev/null +++ b/drivers/adc/adc-uclass.c @@ -0,0 +1,409 @@ +/* + * Copyright (C) 2015 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <dm.h> +#include <dm/lists.h> +#include <dm/device-internal.h> +#include <dm/uclass-internal.h> +#include <adc.h> +#include <power/regulator.h> + +DECLARE_GLOBAL_DATA_PTR; + +#define ADC_UCLASS_PLATDATA_SIZE sizeof(struct adc_uclass_platdata) +#define CHECK_NUMBER true +#define CHECK_MASK (!CHECK_NUMBER) + +/* TODO: add support for timer uclass (for early calls) */ +#ifdef CONFIG_SANDBOX_ARCH +#define sdelay(x) udelay(x) +#else +extern void sdelay(unsigned long loops); +#endif + +static int check_channel(struct udevice *dev, int value, bool number_or_mask, + const char *caller_function) +{ + struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); + unsigned mask = number_or_mask ? (1 << value) : value; + + /* For the real ADC hardware, some ADC channels can be inactive. + * For example if device has 4 analog channels, and only channels + * 1-st and 3-rd are valid, then channel mask is: 0b1010, so request + * with mask 0b1110 should return an error. + */ + if ((uc_pdata->channel_mask >= mask) && (uc_pdata->channel_mask & mask)) + return 0; + + printf("Error in %s/%s().\nWrong channel selection for device: %s\n", + __FILE__, caller_function, dev->name); + + return -EINVAL; +} + +static int adc_supply_enable(struct udevice *dev) +{ + struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); + const char *supply_type; + int ret = 0; + + if (uc_pdata->vdd_supply) { + supply_type = "vdd"; + ret = regulator_set_enable(uc_pdata->vdd_supply, true); + } + + if (!ret && uc_pdata->vss_supply) { + supply_type = "vss"; + ret = regulator_set_enable(uc_pdata->vss_supply, true); + } + + if (ret) + error("%s: can't enable %s-supply!", dev->name, supply_type); + + return ret; +} + +int adc_data_mask(struct udevice *dev, unsigned int *data_mask) +{ + struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); + + if (!uc_pdata) + return -ENOSYS; + + *data_mask = uc_pdata->data_mask; + return 0; +} + +int adc_stop(struct udevice *dev) +{ + const struct adc_ops *ops = dev_get_driver_ops(dev); + + if (!ops->stop) + return -ENOSYS; + + return ops->stop(dev); +} + +int adc_start_channel(struct udevice *dev, int channel) +{ + const struct adc_ops *ops = dev_get_driver_ops(dev); + int ret; + + if (!ops->start_channel) + return -ENOSYS; + + ret = check_channel(dev, channel, CHECK_NUMBER, __func__); + if (ret) + return ret; + + ret = adc_supply_enable(dev); + if (ret) + return ret; + + return ops->start_channel(dev, channel); +} + +int adc_start_channels(struct udevice *dev, unsigned int channel_mask) +{ + const struct adc_ops *ops = dev_get_driver_ops(dev); + int ret; + + if (!ops->start_channels) + return -ENOSYS; + + ret = check_channel(dev, channel_mask, CHECK_MASK, __func__); + if (ret) + return ret; + + ret = adc_supply_enable(dev); + if (ret) + return ret; + + return ops->start_channels(dev, channel_mask); +} + +int adc_channel_data(struct udevice *dev, int channel, unsigned int *data) +{ + struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); + const struct adc_ops *ops = dev_get_driver_ops(dev); + unsigned int timeout_us = uc_pdata->data_timeout_us; + int ret; + + if (!ops->channel_data) + return -ENOSYS; + + ret = check_channel(dev, channel, CHECK_NUMBER, __func__); + if (ret) + return ret; + + do { + ret = ops->channel_data(dev, channel, data); + if (!ret || ret != -EBUSY) + break; + + /* TODO: use timer uclass (for early calls). */ + sdelay(5); + } while (timeout_us--); + + return ret; +} + +int adc_channels_data(struct udevice *dev, unsigned int channel_mask, + struct adc_channel *channels) +{ + struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); + unsigned int timeout_us = uc_pdata->multidata_timeout_us; + const struct adc_ops *ops = dev_get_driver_ops(dev); + int ret; + + if (!ops->channels_data) + return -ENOSYS; + + ret = check_channel(dev, channel_mask, CHECK_MASK, __func__); + if (ret) + return ret; + + do { + ret = ops->channels_data(dev, channel_mask, channels); + if (!ret || ret != -EBUSY) + break; + + /* TODO: use timer uclass (for early calls). */ + sdelay(5); + } while (timeout_us--); + + return ret; +} + +int adc_channel_single_shot(const char *name, int channel, unsigned int *data) +{ + struct udevice *dev; + int ret; + + ret = uclass_get_device_by_name(UCLASS_ADC, name, &dev); + if (ret) + return ret; + + ret = adc_start_channel(dev, channel); + if (ret) + return ret; + + ret = adc_channel_data(dev, channel, data); + if (ret) + return ret; + + return 0; +} + +static int _adc_channels_single_shot(struct udevice *dev, + unsigned int channel_mask, + struct adc_channel *channels) +{ + unsigned int data; + int channel, ret; + + for (channel = 0; channel <= ADC_MAX_CHANNEL; channel++) { + /* Check channel bit. */ + if (!((channel_mask >> channel) & 0x1)) + continue; + + ret = adc_start_channel(dev, channel); + if (ret) + return ret; + + ret = adc_channel_data(dev, channel, &data); + if (ret) + return ret; + + channels->id = channel; + channels->data = data; + channels++; + } + + return 0; +} + +int adc_channels_single_shot(const char *name, unsigned int channel_mask, + struct adc_channel *channels) +{ + struct udevice *dev; + int ret; + + ret = uclass_get_device_by_name(UCLASS_ADC, name, &dev); + if (ret) + return ret; + + ret = adc_start_channels(dev, channel_mask); + if (ret) + goto try_manual; + + ret = adc_channels_data(dev, channel_mask, channels); + if (ret) + return ret; + + return 0; + +try_manual: + if (ret != -ENOSYS) + return ret; + + return _adc_channels_single_shot(dev, channel_mask, channels); +} + +static int adc_vdd_platdata_update(struct udevice *dev) +{ + struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); + int ret; + + /* Warning! + * This function can't return supply device before its bind. + * Please pay attention to proper fdt scan sequence. If ADC device + * will bind before its supply regulator device, then the below 'get' + * will return an error. + */ + ret = device_get_supply_regulator(dev, "vdd-supply", + &uc_pdata->vdd_supply); + if (ret) + return ret; + + ret = regulator_get_value(uc_pdata->vdd_supply); + if (ret < 0) + return ret; + + uc_pdata->vdd_microvolts = ret; + + return 0; +} + +static int adc_vss_platdata_update(struct udevice *dev) +{ + struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); + int ret; + + ret = device_get_supply_regulator(dev, "vss-supply", + &uc_pdata->vss_supply); + if (ret) + return ret; + + ret = regulator_get_value(uc_pdata->vss_supply); + if (ret < 0) + return ret; + + uc_pdata->vss_microvolts = ret; + + return 0; +} + +int adc_vdd_value(struct udevice *dev, int *uV) +{ + struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); + int ret, value_sign = uc_pdata->vdd_polarity_negative ? -1 : 1; + + if (!uc_pdata->vdd_supply) + goto nodev; + + /* Update the regulator Value. */ + ret = adc_vdd_platdata_update(dev); + if (ret) + return ret; +nodev: + if (uc_pdata->vdd_microvolts == -ENODATA) + return -ENODATA; + + *uV = uc_pdata->vdd_microvolts * value_sign; + + return 0; +} + +int adc_vss_value(struct udevice *dev, int *uV) +{ + struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); + int ret, value_sign = uc_pdata->vss_polarity_negative ? -1 : 1; + + if (!uc_pdata->vss_supply) + goto nodev; + + /* Update the regulator Value. */ + ret = adc_vss_platdata_update(dev); + if (ret) + return ret; +nodev: + if (uc_pdata->vss_microvolts == -ENODATA) + return -ENODATA; + + *uV = uc_pdata->vss_microvolts * value_sign; + + return 0; +} + +static int adc_vdd_platdata_set(struct udevice *dev) +{ + struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); + int ret, offset = dev->of_offset; + const void *fdt = gd->fdt_blob; + char *prop; + + prop = "vdd-polarity-negative"; + uc_pdata->vdd_polarity_negative = fdtdec_get_bool(fdt, offset, prop); + + ret = adc_vdd_platdata_update(dev); + if (ret != -ENOENT) + return ret; + + /* No vdd-supply phandle. */ + prop = "vdd-microvolts"; + uc_pdata->vdd_microvolts = fdtdec_get_int(fdt, offset, prop, -ENODATA); + + return 0; +} + +static int adc_vss_platdata_set(struct udevice *dev) +{ + struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); + int ret, offset = dev->of_offset; + const void *fdt = gd->fdt_blob; + char *prop; + + prop = "vss-polarity-negative"; + uc_pdata->vss_polarity_negative = fdtdec_get_bool(fdt, offset, prop); + + ret = adc_vss_platdata_update(dev); + if (ret != -ENOENT) + return ret; + + /* No vss-supply phandle. */ + prop = "vss-microvolts"; + uc_pdata->vss_microvolts = fdtdec_get_int(fdt, offset, prop, -ENODATA); + + return 0; +} + +static int adc_pre_probe(struct udevice *dev) +{ + int ret; + + /* Set ADC VDD platdata: polarity, uV, regulator (phandle). */ + ret = adc_vdd_platdata_set(dev); + if (ret) + error("%s: Can't update Vdd. Error: %d", dev->name, ret); + + /* Set ADC VSS platdata: polarity, uV, regulator (phandle). */ + ret = adc_vss_platdata_set(dev); + if (ret) + error("%s: Can't update Vss. Error: %d", dev->name, ret); + + return 0; +} + +UCLASS_DRIVER(adc) = { + .id = UCLASS_ADC, + .name = "adc", + .pre_probe = adc_pre_probe, + .per_device_platdata_auto_alloc_size = ADC_UCLASS_PLATDATA_SIZE, +}; diff --git a/drivers/adc/exynos-adc.c b/drivers/adc/exynos-adc.c new file mode 100644 index 0000000..534e68d --- /dev/null +++ b/drivers/adc/exynos-adc.c @@ -0,0 +1,145 @@ +/* + * Copyright (C) 2015 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <errno.h> +#include <dm.h> +#include <adc.h> +#include <asm/arch/adc.h> + +struct exynos_adc_priv { + int active_channel; + struct exynos_adc_v2 *regs; +}; + +int exynos_adc_channel_data(struct udevice *dev, int channel, + unsigned int *data) +{ + struct exynos_adc_priv *priv = dev_get_priv(dev); + struct exynos_adc_v2 *regs = priv->regs; + + if (channel != priv->active_channel) { + error("Requested channel is not active!"); + return -EINVAL; + } + + if (ADC_V2_GET_STATUS_FLAG(readl(®s->status)) != FLAG_CONV_END) + return -EBUSY; + + *data = readl(®s->dat) & ADC_V2_DAT_MASK; + + return 0; +} + +int exynos_adc_start_channel(struct udevice *dev, int channel) +{ + struct exynos_adc_priv *priv = dev_get_priv(dev); + struct exynos_adc_v2 *regs = priv->regs; + unsigned int cfg; + + /* Choose channel */ + cfg = readl(®s->con2); + cfg &= ~ADC_V2_CON2_CHAN_SEL_MASK; + cfg |= ADC_V2_CON2_CHAN_SEL(channel); + writel(cfg, ®s->con2); + + /* Start conversion */ + cfg = readl(®s->con1); + writel(cfg | ADC_V2_CON1_STC_EN, ®s->con1); + + priv->active_channel = channel; + + return 0; +} + +int exynos_adc_stop(struct udevice *dev) +{ + struct exynos_adc_priv *priv = dev_get_priv(dev); + struct exynos_adc_v2 *regs = priv->regs; + unsigned int cfg; + + /* Stop conversion */ + cfg = readl(®s->con1); + cfg |= ~ADC_V2_CON1_STC_EN; + + writel(cfg, ®s->con1); + + priv->active_channel = -1; + + return 0; +} + +int exynos_adc_probe(struct udevice *dev) +{ + struct exynos_adc_priv *priv = dev_get_priv(dev); + struct exynos_adc_v2 *regs = priv->regs; + unsigned int cfg; + + /* Check HW version */ + if (readl(®s->version) != ADC_V2_VERSION) { + error("This driver supports only ADC v2!"); + return -ENXIO; + } + + /* ADC Reset */ + writel(ADC_V2_CON1_SOFT_RESET, ®s->con1); + + /* Disable INT - will read status only */ + writel(0x0, ®s->int_en); + + /* CON2 - set conversion parameters */ + cfg = ADC_V2_CON2_C_TIME(3); /* Conversion times: (1 << 3) = 8 */ + cfg |= ADC_V2_CON2_OSEL(OSEL_BINARY); + cfg |= ADC_V2_CON2_ESEL(ESEL_ADC_EVAL_TIME_20CLK); + cfg |= ADC_V2_CON2_HIGHF(HIGHF_CONV_RATE_600KSPS); + writel(cfg, ®s->con2); + + priv->active_channel = -1; + + return 0; +} + +int exynos_adc_ofdata_to_platdata(struct udevice *dev) +{ + struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); + struct exynos_adc_priv *priv = dev_get_priv(dev); + + priv->regs = (struct exynos_adc_v2 *)dev_get_addr(dev); + if (priv->regs == (struct exynos_adc_v2 *)FDT_ADDR_T_NONE) { + error("Dev: %s - can't get address!", dev->name); + return -ENODATA; + } + + uc_pdata->data_mask = ADC_V2_DAT_MASK; + uc_pdata->data_format = ADC_DATA_FORMAT_BIN; + uc_pdata->data_timeout_us = ADC_V2_CONV_TIMEOUT_US; + + /* Mask available channel bits: [0:9] */ + uc_pdata->channel_mask = (2 << ADC_V2_MAX_CHANNEL) - 1; + + return 0; +} + +static const struct adc_ops exynos_adc_ops = { + .start_channel = exynos_adc_start_channel, + .channel_data = exynos_adc_channel_data, + .stop = exynos_adc_stop, +}; + +static const struct udevice_id exynos_adc_ids[] = { + { .compatible = "samsung,exynos-adc-v2" }, + { } +}; + +U_BOOT_DRIVER(exynos_adc) = { + .name = "exynos-adc", + .id = UCLASS_ADC, + .of_match = exynos_adc_ids, + .ops = &exynos_adc_ops, + .probe = exynos_adc_probe, + .ofdata_to_platdata = exynos_adc_ofdata_to_platdata, + .priv_auto_alloc_size = sizeof(struct exynos_adc_priv), +}; diff --git a/drivers/adc/sandbox.c b/drivers/adc/sandbox.c new file mode 100644 index 0000000..3718922 --- /dev/null +++ b/drivers/adc/sandbox.c @@ -0,0 +1,174 @@ +/* + * Copyright (C) 2015 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <errno.h> +#include <dm.h> +#include <adc.h> +#include <sandbox-adc.h> + +/** + * struct sandbox_adc_priv - sandbox ADC device's operation status and data + * + * @conversion_status - conversion status: ACTIVE (started) / INACTIVE (stopped) + * @conversion_mode - conversion mode: single or multi-channel + * @active_channel - active channel number, valid for single channel mode + * data[] - channels data + */ +struct sandbox_adc_priv { + int conversion_status; + int conversion_mode; + int active_channel_mask; + unsigned int data[4]; +}; + +int sandbox_adc_start_channel(struct udevice *dev, int channel) +{ + struct sandbox_adc_priv *priv = dev_get_priv(dev); + + /* Set single-channel mode */ + priv->conversion_mode = SANDBOX_ADC_MODE_SINGLE_CHANNEL; + /* Select channel */ + priv->active_channel_mask = 1 << channel; + /* Start conversion */ + priv->conversion_status = SANDBOX_ADC_ACTIVE; + + return 0; +} + +int sandbox_adc_start_channels(struct udevice *dev, unsigned int channel_mask) +{ + struct sandbox_adc_priv *priv = dev_get_priv(dev); + + /* Set single-channel mode */ + priv->conversion_mode = SANDBOX_ADC_MODE_MULTI_CHANNEL; + /* Select channel */ + priv->active_channel_mask = channel_mask; + /* Start conversion */ + priv->conversion_status = SANDBOX_ADC_ACTIVE; + + return 0; +} + +int sandbox_adc_channel_data(struct udevice *dev, int channel, + unsigned int *data) +{ + struct sandbox_adc_priv *priv = dev_get_priv(dev); + + /* For single-channel conversion mode, check if channel was selected */ + if ((priv->conversion_mode == SANDBOX_ADC_MODE_SINGLE_CHANNEL) && + !(priv->active_channel_mask & (1 << channel))) { + error("Request for an inactive channel!"); + return -EINVAL; + } + + /* The conversion must be started before reading the data */ + if (priv->conversion_status == SANDBOX_ADC_INACTIVE) + return -EIO; + + *data = priv->data[channel]; + + return 0; +} + +int sandbox_adc_channels_data(struct udevice *dev, unsigned int channel_mask, + struct adc_channel *channels) +{ + struct sandbox_adc_priv *priv = dev_get_priv(dev); + int i; + + /* Return error for single-channel conversion mode */ + if (priv->conversion_mode == SANDBOX_ADC_MODE_SINGLE_CHANNEL) { + error("ADC in single-channel mode!"); + return -EPERM; + } + /* Check channel selection */ + if (!(priv->active_channel_mask & channel_mask)) { + error("Request for an inactive channel!"); + return -EINVAL; + } + /* The conversion must be started before reading the data */ + if (priv->conversion_status == SANDBOX_ADC_INACTIVE) + return -EIO; + + for (i = 0; i < SANDBOX_ADC_CHANNELS; i++) { + if (!((channel_mask >> i) & 0x1)) + continue; + + channels->data = priv->data[i]; + channels->id = i; + channels++; + } + + return 0; +} + +int sandbox_adc_stop(struct udevice *dev) +{ + struct sandbox_adc_priv *priv = dev_get_priv(dev); + + /* Start conversion */ + priv->conversion_status = SANDBOX_ADC_INACTIVE; + + return 0; +} + +int sandbox_adc_probe(struct udevice *dev) +{ + struct sandbox_adc_priv *priv = dev_get_priv(dev); + + /* Stop conversion */ + priv->conversion_status = SANDBOX_ADC_INACTIVE; + /* Set single-channel mode */ + priv->conversion_mode = SANDBOX_ADC_MODE_SINGLE_CHANNEL; + /* Deselect all channels */ + priv->active_channel_mask = 0; + + /* Set sandbox test data */ + priv->data[0] = SANDBOX_ADC_CHANNEL0_DATA; + priv->data[1] = SANDBOX_ADC_CHANNEL1_DATA; + priv->data[2] = SANDBOX_ADC_CHANNEL2_DATA; + priv->data[3] = SANDBOX_ADC_CHANNEL3_DATA; + + return 0; +} + +int sandbox_adc_ofdata_to_platdata(struct udevice *dev) +{ + struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev); + + uc_pdata->data_mask = SANDBOX_ADC_DATA_MASK; + uc_pdata->data_format = ADC_DATA_FORMAT_BIN; + uc_pdata->data_timeout_us = 0; + + /* Mask available channel bits: [0:3] */ + uc_pdata->channel_mask = (1 << SANDBOX_ADC_CHANNELS) - 1; + + return 0; +} + +static const struct adc_ops sandbox_adc_ops = { + .start_channel = sandbox_adc_start_channel, + .start_channels = sandbox_adc_start_channels, + .channel_data = sandbox_adc_channel_data, + .channels_data = sandbox_adc_channels_data, + .stop = sandbox_adc_stop, +}; + +static const struct udevice_id sandbox_adc_ids[] = { + { .compatible = "sandbox,adc" }, + { } +}; + +U_BOOT_DRIVER(sandbox_adc) = { + .name = "sandbox-adc", + .id = UCLASS_ADC, + .of_match = sandbox_adc_ids, + .ops = &sandbox_adc_ops, + .probe = sandbox_adc_probe, + .ofdata_to_platdata = sandbox_adc_ofdata_to_platdata, + .priv_auto_alloc_size = sizeof(struct sandbox_adc_priv), +}; diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c index 15ecfee..44353c7 100644 --- a/drivers/mmc/s5p_sdhci.c +++ b/drivers/mmc/s5p_sdhci.c @@ -106,6 +106,12 @@ static int do_sdhci_init(struct sdhci_host *host) flag = host->bus_width == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE; dev_id = host->index + PERIPH_ID_SDMMC0; + ret = exynos_pinmux_config(dev_id, flag); + if (ret) { + printf("external SD not configured\n"); + return ret; + } + if (dm_gpio_is_valid(&host->pwr_gpio)) { dm_gpio_set_value(&host->pwr_gpio, 1); ret = exynos_pinmux_config(dev_id, flag); @@ -121,12 +127,6 @@ static int do_sdhci_init(struct sdhci_host *host) debug("no SD card detected (%d)\n", ret); return -ENODEV; } - - ret = exynos_pinmux_config(dev_id, flag); - if (ret) { - printf("external SD not configured\n"); - return ret; - } } return s5p_sdhci_core_init(host); @@ -193,7 +193,7 @@ static int process_nodes(const void *blob, int node_list[], int count) } ret = do_sdhci_init(host); - if (ret) { + if (ret && ret != -ENODEV) { printf("%s: failed to initialize dev %d (%d)\n", __func__, i, ret); failed++; } diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig index 547fd1a..fb29843 100644 --- a/drivers/power/pmic/Kconfig +++ b/drivers/power/pmic/Kconfig @@ -33,6 +33,20 @@ config DM_PMIC_MAX77686 This config enables implementation of driver-model pmic uclass features for PMIC MAX77686. The driver implements read/write operations. +config PMIC_S2MPS11 + bool "Enable Driver Model for PMIC Samsung S2MPS11" + depends on DM_PMIC + ---help--- + The Samsung S2MPS11 PMIC provides: + - 38 adjustable LDO regulators + - 9 High-Efficiency Buck Converters + - 1 BuckBoost Converter + - RTC with two alarms + - Backup battery charger + - I2C Configuration Interface + This driver provides access to I/O interface only. + Binding info: doc/device-tree-bindings/pmic/s2mps11.txt + config DM_PMIC_SANDBOX bool "Enable Driver Model for emulated Sandbox PMIC " depends on DM_PMIC diff --git a/drivers/power/pmic/Makefile b/drivers/power/pmic/Makefile index 00fde71..91e78f8 100644 --- a/drivers/power/pmic/Makefile +++ b/drivers/power/pmic/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_DM_PMIC) += pmic-uclass.o obj-$(CONFIG_DM_PMIC_MAX77686) += max77686.o obj-$(CONFIG_DM_PMIC_PFUZE100) += pfuze100.o +obj-$(CONFIG_PMIC_S2MPS11) += s2mps11.o obj-$(CONFIG_DM_PMIC_SANDBOX) += sandbox.o i2c_pmic_emul.o obj-$(CONFIG_PMIC_ACT8846) += act8846.o obj-$(CONFIG_PMIC_TPS65090) += tps65090.o diff --git a/drivers/power/pmic/s2mps11.c b/drivers/power/pmic/s2mps11.c new file mode 100644 index 0000000..9d83059 --- /dev/null +++ b/drivers/power/pmic/s2mps11.c @@ -0,0 +1,62 @@ +/* + * Copyright (C) 2015 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <fdtdec.h> +#include <errno.h> +#include <dm.h> +#include <i2c.h> +#include <power/pmic.h> +#include <power/s2mps11.h> + +DECLARE_GLOBAL_DATA_PTR; + +static int s2mps11_reg_count(struct udevice *dev) +{ + return S2MPS11_REG_COUNT; +} + +static int s2mps11_write(struct udevice *dev, uint reg, const uint8_t *buff, + int len) +{ + int ret; + + ret = dm_i2c_write(dev, reg, buff, len); + if (ret) + error("write error to device: %p register: %#x!", dev, reg); + + return ret; +} + +static int s2mps11_read(struct udevice *dev, uint reg, uint8_t *buff, int len) +{ + int ret; + + ret = dm_i2c_read(dev, reg, buff, len); + if (ret) + error("read error from device: %p register: %#x!", dev, reg); + + return ret; +} + +static struct dm_pmic_ops s2mps11_ops = { + .reg_count = s2mps11_reg_count, + .read = s2mps11_read, + .write = s2mps11_write, +}; + +static const struct udevice_id s2mps11_ids[] = { + { .compatible = "samsung,s2mps11-pmic" }, + { } +}; + +U_BOOT_DRIVER(pmic_s2mps11) = { + .name = "s2mps11_pmic", + .id = UCLASS_PMIC, + .of_match = s2mps11_ids, + .ops = &s2mps11_ops, +}; diff --git a/drivers/power/regulator/regulator-uclass.c b/drivers/power/regulator/regulator-uclass.c index a5170df..4241a4c 100644 --- a/drivers/power/regulator/regulator-uclass.c +++ b/drivers/power/regulator/regulator-uclass.c @@ -138,6 +138,13 @@ int regulator_get_by_devname(const char *devname, struct udevice **devp) return uclass_get_device_by_name(UCLASS_REGULATOR, devname, devp); } +int device_get_supply_regulator(struct udevice *dev, const char *supply_name, + struct udevice **devp) +{ + return uclass_get_device_by_phandle(UCLASS_REGULATOR, dev, + supply_name, devp); +} + int regulator_autoset(struct udevice *dev) { struct dm_regulator_uclass_platdata *uc_pdata; diff --git a/include/adc.h b/include/adc.h new file mode 100644 index 0000000..4b14017 --- /dev/null +++ b/include/adc.h @@ -0,0 +1,288 @@ +/* + * Copyright (C) 2015 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _ADC_H_ +#define _ADC_H_ + +/* ADC_CHANNEL() - ADC channel bit mask, to select only required channels */ +#define ADC_CHANNEL(x) (1 << x) + +/* The last possible selected channel with 32-bit mask */ +#define ADC_MAX_CHANNEL 31 + +/** + * adc_data_format: define the ADC output data format, can be useful when + * the device's input Voltage range is bipolar. + * - ADC_DATA_FORMAT_BIN - binary offset + * - ADC_DATA_FORMAT_2S - two's complement + * + * Note: Device's driver should fill the 'data_format' field of its uclass's + * platform data using one of the above data format types. + */ +enum adc_data_format { + ADC_DATA_FORMAT_BIN, + ADC_DATA_FORMAT_2S, +}; + +/** + * struct adc_channel - structure to hold channel conversion data. + * Useful to keep the result of a multi-channel conversion output. + * + * @id - channel id + * @data - channel conversion data + */ +struct adc_channel { + int id; + unsigned int data; +}; + +/** + * struct adc_uclass_platdata - basic ADC info + * + * Note: The positive/negative reference Voltage is only a name and it doesn't + * provide an information about the value polarity. It is possible, for both + * values to be a negative or positive. For this purpose the uclass's platform + * data provides a bool fields: 'vdd/vss_supply_is_negative'. This is useful, + * since the regulator API returns only a positive Voltage values. + * + * To get the reference Voltage values with polarity, use functions: + * - adc_vdd_value() + * - adc_vss_value() + * Those are useful for some cases of ADC's references, e.g.: + * * Vdd: +3.3V; Vss: -3.3V -> 6.6 Vdiff + * * Vdd: +3.3V; Vss: +0.3V -> 3.0 Vdiff + * * Vdd: +3.3V; Vss: 0.0V -> 3.3 Vdiff + * The last one is usually standard and doesn't require the fdt polarity info. + * + * For more informations read binding info: + * - doc/device-tree-bindings/adc/adc.txt + * + * @data_mask - conversion output data mask + * @data_timeout_us - single channel conversion timeout + * @multidata_timeout_us - multi channel conversion timeout + * @channel_mask - bit mask of available channels [0:31] + * @vdd_supply - positive reference Voltage supply (regulator) + * @vss_supply - negative reference Voltage supply (regulator) + * @vdd_polarity_negative - positive reference Voltage has negative polarity + * @vss_polarity_negative - negative reference Voltage has negative polarity + * @vdd_microvolts - positive reference Voltage value + * @vss_microvolts - negative reference Voltage value + */ +struct adc_uclass_platdata { + int data_format; + unsigned int data_mask; + unsigned int data_timeout_us; + unsigned int multidata_timeout_us; + unsigned int channel_mask; + struct udevice *vdd_supply; + struct udevice *vss_supply; + bool vdd_polarity_negative; + bool vss_polarity_negative; + int vdd_microvolts; + int vss_microvolts; +}; + +/** + * struct adc_ops - ADC device operations for single/multi-channel operation. + */ +struct adc_ops { + /** + * start_channel() - start conversion with its default parameters + * for the given channel number. + * + * @dev: ADC device to init + * @channel: analog channel number + * @return: 0 if OK, -ve on error + */ + int (*start_channel)(struct udevice *dev, int channel); + + /** + * start_channels() - start conversion with its default parameters + * for the channel numbers selected by the bit mask. + * + * This is optional, useful when the hardware supports multichannel + * conversion by the single software trigger. + * + * @dev: ADC device to init + * @channel_mask: bit mask of selected analog channels + * @return: 0 if OK, -ve on error + */ + int (*start_channels)(struct udevice *dev, unsigned int channel_mask); + + /** + * channel_data() - get conversion output data for the given channel. + * + * Note: The implementation of this function should only check, that + * the conversion data is available at the call time. If the hardware + * requires some delay to get the data, then this function should + * return with -EBUSY value. The ADC API will call it in a loop, + * until the data is available or the timeout expires. The maximum + * timeout for this operation is defined by the field 'data_timeout_us' + * in ADC uclasses platform data structure. + * + * @dev: ADC device to trigger + * @channel: selected analog channel number + * @data: returned pointer to selected channel's output data + * @return: 0 if OK, -EBUSY if busy, and other negative on error + */ + int (*channel_data)(struct udevice *dev, int channel, + unsigned int *data); + + /** + * channels_data() - get conversion data for the selected channels. + * + * This is optional, useful when multichannel conversion is supported + * by the hardware, by the single software trigger. + * + * For the proper implementation, please look at the 'Note' for the + * above method. The only difference is in used timeout value, which + * is defined by field 'multidata_timeout_us'. + * + * @dev: ADC device to trigger + * @channel_mask: bit mask of selected analog channels + * @channels: returned pointer to array of output data for channels + * selected by the given mask + * @return: 0 if OK, -ve on error + */ + int (*channels_data)(struct udevice *dev, unsigned int channel_mask, + struct adc_channel *channels); + + /** + * stop() - stop conversion of the given ADC device + * + * @dev: ADC device to stop + * @return: 0 if OK, -ve on error + */ + int (*stop)(struct udevice *dev); +}; + +/** + * adc_start_channel() - start conversion for given device/channel and exit. + * + * @dev: ADC device + * @channel: analog channel number + * @return: 0 if OK, -ve on error + */ +int adc_start_channel(struct udevice *dev, int channel); + +/** + * adc_start_channels() - start conversion for given device/channels and exit. + * + * Note: + * To use this function, device must implement method: start_channels(). + * + * @dev: ADC device to start + * @channel_mask: channel selection - a bit mask + * @channel_mask: bit mask of analog channels + * @return: 0 if OK, -ve on error + */ +int adc_start_channels(struct udevice *dev, unsigned int channel_mask); + +/** + * adc_channel_data() - get conversion data for the given device channel number. + * + * @dev: ADC device to read + * @channel: analog channel number + * @data: pointer to returned channel's data + * @return: 0 if OK, -ve on error + */ +int adc_channel_data(struct udevice *dev, int channel, unsigned int *data); + +/** + * adc_channels_data() - get conversion data for the channels selected by mask + * + * Note: + * To use this function, device must implement methods: + * - start_channels() + * - channels_data() + * + * @dev: ADC device to read + * @channel_mask: channel selection - a bit mask + * @channels: pointer to structure array of returned data for each channel + * @return: 0 if OK, -ve on error + */ +int adc_channels_data(struct udevice *dev, unsigned int channel_mask, + struct adc_channel *channels); + +/** + * adc_data_mask() - get data mask (ADC resolution bitmask) for given ADC device + * + * This can be used if adc uclass platform data is filled. + * + * @dev: ADC device to check + * @data_mask: pointer to the returned data bitmask + * @return: 0 if OK, -ve on error + */ +int adc_data_mask(struct udevice *dev, unsigned int *data_mask); + +/** + * adc_channel_single_shot() - get output data of conversion for the ADC + * device's channel. This function searches for the device with the given name, + * starts the given channel conversion and returns the output data. + * + * Note: To use this function, device must implement metods: + * - start_channel() + * - channel_data() + * + * @name: device's name to search + * @channel: device's input channel to init + * @data: pointer to conversion output data + * @return: 0 if OK, -ve on error + */ +int adc_channel_single_shot(const char *name, int channel, unsigned int *data); + +/** + * adc_channels_single_shot() - get ADC conversion output data for the selected + * device's channels. This function searches for the device by the given name, + * starts the selected channels conversion and returns the output data as array + * of type 'struct adc_channel'. + * + * Note: This function can be used if device implements one of ADC's single + * or multi-channel operation API. If multi-channel operation is not supported, + * then each selected channel is triggered by the sequence start/data in a loop. + * + * @name: device's name to search + * @channel_mask: channel selection - a bit mask + * @channels: pointer to conversion output data for the selected channels + * @return: 0 if OK, -ve on error + */ +int adc_channels_single_shot(const char *name, unsigned int channel_mask, + struct adc_channel *channels); + +/** + * adc_vdd_value() - get the ADC device's positive reference Voltage value + * + * Note: Depending on bool value 'vdd_supply_is_negative' of platform data, + * the returned uV value can be negative, and it's not an error. + * + * @dev: ADC device to check + * @uV: Voltage value with polarization sign (uV) + * @return: 0 on success or -ve on error +*/ +int adc_vdd_value(struct udevice *dev, int *uV); + +/** + * adc_vss_value() - get the ADC device's negative reference Voltage value + * + * Note: Depending on bool value 'vdd_supply_is_negative' of platform data, + * the returned uV value can be negative, and it's not an error. + * + * @dev: ADC device to check + * @uV: Voltage value with polarization sign (uV) + * @return: 0 on success or -ve on error +*/ +int adc_vss_value(struct udevice *dev, int *uV); + +/** + * adc_stop() - stop operation for given ADC device. + * + * @dev: ADC device to stop + * @return: 0 if OK, -ve on error + */ +int adc_stop(struct udevice *dev); + +#endif diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 3c70158..648e48b 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -94,6 +94,8 @@ "boot.scr fat 0 1;" \ "boot.cmd fat 0 1;" \ "exynos5422-odroidxu3.dtb fat 0 1;" \ + "exynos5422-odroidxu3-lite.dtb fat 0 1;" \ + "exynos5422-odroidxu4.dtb fat 0 1;" \ "boot part 0 1;" \ "root part 0 2\0" @@ -113,9 +115,19 @@ /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */ #define CONFIG_MISC_COMMON +#define CONFIG_MISC_INIT_R #define CONFIG_SET_DFU_ALT_INFO #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K) +/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */ +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_ODROID_REV_AIN 9 +#define CONFIG_REVISION_TAG +#define CONFIG_BOARD_TYPES + +#undef CONFIG_SYS_BOARD +#define CONFIG_SYS_BOARD "odroid" + /* Define new extra env settings, including DFU settings */ #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \ diff --git a/include/dm/uclass-id.h b/include/dm/uclass-id.h index 886a44c..d0cf4ce 100644 --- a/include/dm/uclass-id.h +++ b/include/dm/uclass-id.h @@ -25,6 +25,7 @@ enum uclass_id { UCLASS_SIMPLE_BUS, /* bus with child devices */ /* U-Boot uclasses start here - in alphabetical order */ + UCLASS_ADC, /* Analog-to-digital converter */ UCLASS_CLK, /* Clock source, e.g. used by peripherals */ UCLASS_CPU, /* CPU, typically part of an SoC */ UCLASS_CROS_EC, /* Chrome OS EC */ diff --git a/include/power/regulator.h b/include/power/regulator.h index 1a51c3f..63c0814 100644 --- a/include/power/regulator.h +++ b/include/power/regulator.h @@ -419,4 +419,20 @@ int regulator_get_by_devname(const char *devname, struct udevice **devp); */ int regulator_get_by_platname(const char *platname, struct udevice **devp); +/** + * device_get_supply_regulator: returns the pointer to the supply regulator. + * Search by phandle, found in device's node. + * + * Note: Please pay attention to proper order of device bind sequence. + * The regulator device searched by the phandle, must be binded before + * this function call. + * + * @dev - device with supply phandle + * @supply_name - phandle name of regulator + * @devp - returned pointer to the supply device + * @return 0 on success or negative value of errno. + */ +int device_get_supply_regulator(struct udevice *dev, const char *supply_name, + struct udevice **devp); + #endif /* _INCLUDE_REGULATOR_H_ */ diff --git a/include/power/s2mps11.h b/include/power/s2mps11.h new file mode 100644 index 0000000..5da4719 --- /dev/null +++ b/include/power/s2mps11.h @@ -0,0 +1,109 @@ +#ifndef __S2MPS11__H__ +#define __S2MPS11__H__ + +enum s2mps11_reg { + S2MPS11_REG_ID = 0, + S2MPS11_REG_INT1, + S2MPS11_REG_INT2, + S2MPS11_REG_INT3, + S2MPS11_REG_INT1M, + S2MPS11_REG_INT2M, + S2MPS11_REG_INT3M, + S2MPS11_REG_STATUS1, + S2MPS11_REG_STATUS2, + S2MPS11_REG_OFFSRC, + S2MPS11_REG_PWRONSRC, + S2MPS11_REG_RTC_CTRL, + S2MPS11_REG_CTRL1, + S2MPS11_REG_ETC_TEST, + S2MPS11_REG_RSVD3, + S2MPS11_REG_BU_CHG, + S2MPS11_REG_RAMP, + S2MPS11_REG_RAMP_BUCK, + S2MPS11_REG_LDO1_8, + S2MPS11_REG_LDO9_16, + S2MPS11_REG_LDO17_24, + S2MPS11_REG_LDO25_32, + S2MPS11_REG_LDO33_38, + S2MPS11_REG_LDO1_8_OVC, + S2MPS11_REG_LDO9_16_OVC, + S2MPS11_REG_LDO17_24_OVC, + S2MPS11_REG_LDO25_32_OVC, + S2MPS11_REG_LDO33_38_OVC, + S2MPS11_REG_RESERVED1, + S2MPS11_REG_RESERVED2, + S2MPS11_REG_RESERVED3, + S2MPS11_REG_RESERVED4, + S2MPS11_REG_RESERVED5, + S2MPS11_REG_RESERVED6, + S2MPS11_REG_RESERVED7, + S2MPS11_REG_RESERVED8, + S2MPS11_REG_WDRSTEN_CTRL, + S2MPS11_REG_B1CTRL1, + S2MPS11_REG_B1CTRL2, + S2MPS11_REG_B2CTRL1, + S2MPS11_REG_B2CTRL2, + S2MPS11_REG_B3CTRL1, + S2MPS11_REG_B3CTRL2, + S2MPS11_REG_B4CTRL1, + S2MPS11_REG_B4CTRL2, + S2MPS11_REG_B5CTRL1, + S2MPS11_REG_BUCK5_SW, + S2MPS11_REG_B5CTRL2, + S2MPS11_REG_B5CTRL3, + S2MPS11_REG_B5CTRL4, + S2MPS11_REG_B5CTRL5, + S2MPS11_REG_B6CTRL1, + S2MPS11_REG_B6CTRL2, + S2MPS11_REG_B7CTRL1, + S2MPS11_REG_B7CTRL2, + S2MPS11_REG_B8CTRL1, + S2MPS11_REG_B8CTRL2, + S2MPS11_REG_B9CTRL1, + S2MPS11_REG_B9CTRL2, + S2MPS11_REG_B10CTRL1, + S2MPS11_REG_B10CTRL2, + S2MPS11_REG_L1CTRL, + S2MPS11_REG_L2CTRL, + S2MPS11_REG_L3CTRL, + S2MPS11_REG_L4CTRL, + S2MPS11_REG_L5CTRL, + S2MPS11_REG_L6CTRL, + S2MPS11_REG_L7CTRL, + S2MPS11_REG_L8CTRL, + S2MPS11_REG_L9CTRL, + S2MPS11_REG_L10CTRL, + S2MPS11_REG_L11CTRL, + S2MPS11_REG_L12CTRL, + S2MPS11_REG_L13CTRL, + S2MPS11_REG_L14CTRL, + S2MPS11_REG_L15CTRL, + S2MPS11_REG_L16CTRL, + S2MPS11_REG_L17CTRL, + S2MPS11_REG_L18CTRL, + S2MPS11_REG_L19CTRL, + S2MPS11_REG_L20CTRL, + S2MPS11_REG_L21CTRL, + S2MPS11_REG_L22CTRL, + S2MPS11_REG_L23CTRL, + S2MPS11_REG_L24CTRL, + S2MPS11_REG_L25CTRL, + S2MPS11_REG_L26CTRL, + S2MPS11_REG_L27CTRL, + S2MPS11_REG_L28CTRL, + S2MPS11_REG_L29CTRL, + S2MPS11_REG_L30CTRL, + S2MPS11_REG_L31CTRL, + S2MPS11_REG_L32CTRL, + S2MPS11_REG_L33CTRL, + S2MPS11_REG_L34CTRL, + S2MPS11_REG_L35CTRL, + S2MPS11_REG_L36CTRL, + S2MPS11_REG_L37CTRL, + S2MPS11_REG_L38CTRL, + S2MPS11_REG_COUNT, +}; + +#define S2MPS11_LDO26_ENABLE 0xec + +#endif diff --git a/include/power/sandbox_pmic.h b/include/power/sandbox_pmic.h index 8547674..7fdbfb9 100644 --- a/include/power/sandbox_pmic.h +++ b/include/power/sandbox_pmic.h @@ -126,6 +126,10 @@ enum { #define SANDBOX_BUCK1_AUTOSET_EXPECTED_UA 200000 #define SANDBOX_BUCK1_AUTOSET_EXPECTED_ENABLE true +/* BUCK2: for testing sandbox ADC's supply */ +#define SANDBOX_BUCK2_INITIAL_EXPECTED_UV 3000000 +#define SANDBOX_BUCK2_SET_UV 3300000 + /* LDO1/2 for testing regulator_list_autoset() */ #define SANDBOX_LDO1_AUTOSET_EXPECTED_UV 1800000 #define SANDBOX_LDO1_AUTOSET_EXPECTED_UA 100000 diff --git a/include/samsung/exynos5-dt-types.h b/include/samsung/exynos5-dt-types.h new file mode 100644 index 0000000..479e2e7 --- /dev/null +++ b/include/samsung/exynos5-dt-types.h @@ -0,0 +1,27 @@ +#ifndef _EXYNOS5_DT_H_ +#define _EXYNOS5_DT_H_ + +enum { + EXYNOS5_BOARD_GENERIC, + + EXYNOS5_BOARD_ODROID_XU3, + EXYNOS5_BOARD_ODROID_XU3_REV01, + EXYNOS5_BOARD_ODROID_XU3_REV02, + EXYNOS5_BOARD_ODROID_XU4_REV01, + EXYNOS5_BOARD_ODROID_UNKNOWN, + + EXYNOS5_BOARD_COUNT, +}; + +struct odroid_rev_info { + int board_type; + int board_rev; + int adc_val; + const char *name; +}; + +bool board_is_generic(void); +bool board_is_odroidxu3(void); +bool board_is_odroidxu4(void); + +#endif diff --git a/include/sandbox-adc.h b/include/sandbox-adc.h new file mode 100644 index 0000000..79ff01c --- /dev/null +++ b/include/sandbox-adc.h @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2015 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _SANDBOX_ADC_H_ +#define _SANDBOX_ADC_H_ + +#define SANDBOX_ADC_DEVNAME "adc@0" +#define SANDBOX_ADC_DATA_MASK 0xffff /* 16-bits resolution */ +#define SANDBOX_ADC_CHANNELS 4 +#define SANDBOX_ADC_CHANNEL0_DATA 0x0 +#define SANDBOX_ADC_CHANNEL1_DATA 0x1000 +#define SANDBOX_ADC_CHANNEL2_DATA 0x2000 +#define SANDBOX_ADC_CHANNEL3_DATA 0x3000 + +enum sandbox_adc_mode { + SANDBOX_ADC_MODE_SINGLE_CHANNEL = 0, + SANDBOX_ADC_MODE_MULTI_CHANNEL, +}; + +enum sandbox_adc_status { + SANDBOX_ADC_INACTIVE = 0, + SANDBOX_ADC_ACTIVE, +}; + +#define SANDBOX_ADC_VSS_VALUE 0 + +#endif diff --git a/test/dm/Makefile b/test/dm/Makefile index 7b3626c..39630f6 100644 --- a/test/dm/Makefile +++ b/test/dm/Makefile @@ -33,4 +33,5 @@ obj-y += syscon.o obj-$(CONFIG_DM_USB) += usb.o obj-$(CONFIG_DM_PMIC) += pmic.o obj-$(CONFIG_DM_REGULATOR) += regulator.o +obj-$(CONFIG_ADC) += adc.o endif diff --git a/test/dm/adc.c b/test/dm/adc.c new file mode 100644 index 0000000..b0d4fe5 --- /dev/null +++ b/test/dm/adc.c @@ -0,0 +1,165 @@ +/* + * Tests for the driver model ADC API + * + * Copyright (c) 2015 Samsung Electronics + * Przemyslaw Marczak <p.marczak@samsung.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <adc.h> +#include <dm.h> +#include <dm/root.h> +#include <dm/util.h> +#include <dm/test.h> +#include <errno.h> +#include <fdtdec.h> +#include <power/regulator.h> +#include <power/sandbox_pmic.h> +#include <sandbox-adc.h> +#include <test/ut.h> + +DECLARE_GLOBAL_DATA_PTR; + +static int dm_test_adc_bind(struct unit_test_state *uts) +{ + struct udevice *dev; + + ut_assertok(uclass_get_device_by_name(UCLASS_ADC, "adc", &dev)); + ut_asserteq_str(SANDBOX_ADC_DEVNAME, dev->name); + + return 0; +} +DM_TEST(dm_test_adc_bind, DM_TESTF_SCAN_FDT); + +static int dm_test_adc_wrong_channel_selection(struct unit_test_state *uts) +{ + struct udevice *dev; + + ut_assertok(uclass_get_device_by_name(UCLASS_ADC, "adc", &dev)); + ut_asserteq(-EINVAL, adc_start_channel(dev, SANDBOX_ADC_CHANNELS)); + + return 0; +} +DM_TEST(dm_test_adc_wrong_channel_selection, DM_TESTF_SCAN_FDT); + +static int dm_test_adc_supply(struct unit_test_state *uts) +{ + struct udevice *supply; + struct udevice *dev; + int uV; + + ut_assertok(uclass_get_device_by_name(UCLASS_ADC, "adc", &dev)); + + /* Test Vss value - predefined 0 uV */ + ut_assertok(adc_vss_value(dev, &uV)); + ut_asserteq(SANDBOX_ADC_VSS_VALUE, uV); + + /* Test Vdd initial value - buck2 */ + ut_assertok(adc_vdd_value(dev, &uV)); + ut_asserteq(SANDBOX_BUCK2_INITIAL_EXPECTED_UV, uV); + + /* Change Vdd value - buck2 manual preset */ + ut_assertok(regulator_get_by_devname(SANDBOX_BUCK2_DEVNAME, &supply)); + ut_assertok(regulator_set_value(supply, SANDBOX_BUCK2_SET_UV)); + ut_asserteq(SANDBOX_BUCK2_SET_UV, regulator_get_value(supply)); + + /* Update ADC platdata and get new Vdd value */ + ut_assertok(adc_vdd_value(dev, &uV)); + ut_asserteq(SANDBOX_BUCK2_SET_UV, uV); + + /* Disable buck2 and test ADC supply enable function */ + ut_assertok(regulator_set_enable(supply, false)); + ut_asserteq(false, regulator_get_enable(supply)); + /* adc_start_channel() should enable the supply regulator */ + ut_assertok(adc_start_channel(dev, 0)); + ut_asserteq(true, regulator_get_enable(supply)); + + return 0; +} +DM_TEST(dm_test_adc_supply, DM_TESTF_SCAN_FDT); + +struct adc_channel adc_channel_test_data[] = { + { 0, SANDBOX_ADC_CHANNEL0_DATA }, + { 1, SANDBOX_ADC_CHANNEL1_DATA }, + { 2, SANDBOX_ADC_CHANNEL2_DATA }, + { 3, SANDBOX_ADC_CHANNEL3_DATA }, +}; + +static int dm_test_adc_single_channel_conversion(struct unit_test_state *uts) +{ + struct adc_channel *tdata = adc_channel_test_data; + unsigned int i, data; + struct udevice *dev; + + ut_assertok(uclass_get_device_by_name(UCLASS_ADC, "adc", &dev)); + /* Test each ADC channel's value */ + for (i = 0; i < SANDBOX_ADC_CHANNELS; i++, tdata++) { + ut_assertok(adc_start_channel(dev, tdata->id)); + ut_assertok(adc_channel_data(dev, tdata->id, &data)); + ut_asserteq(tdata->data, data); + } + + return 0; +} +DM_TEST(dm_test_adc_single_channel_conversion, DM_TESTF_SCAN_FDT); + +static int dm_test_adc_multi_channel_conversion(struct unit_test_state *uts) +{ + struct adc_channel channels[SANDBOX_ADC_CHANNELS]; + struct udevice *dev; + struct adc_channel *tdata = adc_channel_test_data; + unsigned int i, channel_mask; + + channel_mask = ADC_CHANNEL(0) | ADC_CHANNEL(1) | + ADC_CHANNEL(2) | ADC_CHANNEL(3); + + /* Start multi channel conversion */ + ut_assertok(uclass_get_device_by_name(UCLASS_ADC, "adc", &dev)); + ut_assertok(adc_start_channels(dev, channel_mask)); + ut_assertok(adc_channels_data(dev, channel_mask, channels)); + + /* Compare the expected and returned conversion data. */ + for (i = 0; i < SANDBOX_ADC_CHANNELS; i++, tdata++) + ut_asserteq(tdata->data, channels[i].data); + + return 0; +} +DM_TEST(dm_test_adc_multi_channel_conversion, DM_TESTF_SCAN_FDT); + +static int dm_test_adc_single_channel_shot(struct unit_test_state *uts) +{ + struct adc_channel *tdata = adc_channel_test_data; + unsigned int i, data; + + for (i = 0; i < SANDBOX_ADC_CHANNELS; i++, tdata++) { + /* Start single channel conversion */ + ut_assertok(adc_channel_single_shot("adc", tdata->id, &data)); + /* Compare the expected and returned conversion data. */ + ut_asserteq(tdata->data, data); + } + + return 0; +} +DM_TEST(dm_test_adc_single_channel_shot, DM_TESTF_SCAN_FDT); + +static int dm_test_adc_multi_channel_shot(struct unit_test_state *uts) +{ + struct adc_channel channels[SANDBOX_ADC_CHANNELS]; + struct adc_channel *tdata = adc_channel_test_data; + unsigned int i, channel_mask; + + channel_mask = ADC_CHANNEL(0) | ADC_CHANNEL(1) | + ADC_CHANNEL(2) | ADC_CHANNEL(3); + + /* Start single call and multi channel conversion */ + ut_assertok(adc_channels_single_shot("adc", channel_mask, channels)); + + /* Compare the expected and returned conversion data. */ + for (i = 0; i < SANDBOX_ADC_CHANNELS; i++, tdata++) + ut_asserteq(tdata->data, channels[i].data); + + return 0; +} +DM_TEST(dm_test_adc_multi_channel_shot, DM_TESTF_SCAN_FDT); |