summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig6
-rw-r--r--board/Marvell/db-88f6820-gp/Kconfig15
-rw-r--r--board/Marvell/db-88f6820-gp/Makefile7
-rw-r--r--board/Marvell/db-88f6820-gp/binary.016
-rw-r--r--board/Marvell/db-88f6820-gp/db-88f6820-gp.c103
-rw-r--r--board/Marvell/db-88f6820-gp/kwbimage.cfg12
-rw-r--r--configs/db-88f6820-gp_defconfig2
-rw-r--r--include/configs/db-88f6820-gp.h72
8 files changed, 233 insertions, 0 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 00be305..152a029 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -102,6 +102,11 @@ config KIRKWOOD
bool "Marvell Kirkwood"
select CPU_ARM926EJS
+config TARGET_DB_88F6820_GP
+ bool "Support DB-88F6820-GP"
+ select CPU_V7
+ select SUPPORT_SPL
+
config TARGET_DB_MV784MP_GP
bool "Support db-mv784mp-gp"
select CPU_V7
@@ -850,6 +855,7 @@ source "board/BuR/kwb/Kconfig"
source "board/BuR/tseries/Kconfig"
source "board/CarMediaLab/flea3/Kconfig"
source "board/Marvell/aspenite/Kconfig"
+source "board/Marvell/db-88f6820-gp/Kconfig"
source "board/Marvell/db-mv784mp-gp/Kconfig"
source "board/Marvell/gplugd/Kconfig"
source "board/altera/socfpga/Kconfig"
diff --git a/board/Marvell/db-88f6820-gp/Kconfig b/board/Marvell/db-88f6820-gp/Kconfig
new file mode 100644
index 0000000..b2e9115
--- /dev/null
+++ b/board/Marvell/db-88f6820-gp/Kconfig
@@ -0,0 +1,15 @@
+if TARGET_DB_88F6820_GP
+
+config SYS_BOARD
+ default "db-88f6820-gp"
+
+config SYS_VENDOR
+ default "Marvell"
+
+config SYS_SOC
+ default "mvebu"
+
+config SYS_CONFIG_NAME
+ default "db-88f6820-gp"
+
+endif
diff --git a/board/Marvell/db-88f6820-gp/Makefile b/board/Marvell/db-88f6820-gp/Makefile
new file mode 100644
index 0000000..58d40dd
--- /dev/null
+++ b/board/Marvell/db-88f6820-gp/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2015 Stefan Roese <sr@denx.de>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y := db-88f6820-gp.o
diff --git a/board/Marvell/db-88f6820-gp/binary.0 b/board/Marvell/db-88f6820-gp/binary.0
new file mode 100644
index 0000000..57a4cbf
--- /dev/null
+++ b/board/Marvell/db-88f6820-gp/binary.0
@@ -0,0 +1,16 @@
+--------
+WARNING:
+--------
+This file should contain the bin_hdr generated by the original Marvell
+U-Boot implementation. As this is currently not included in this
+U-Boot version, we have added this placeholder, so that the U-Boot
+image can be generated without errors.
+
+If you have a known to be working bin_hdr for your board, then you
+just need to replace this text file here with the binary header
+and recompile U-Boot.
+
+In a few weeks, mainline U-Boot will get support to generate the
+bin_hdr with the DDR training code itself. By implementing this code
+as SPL U-Boot. Then this file will not be needed any more and will
+get removed.
diff --git a/board/Marvell/db-88f6820-gp/db-88f6820-gp.c b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c
new file mode 100644
index 0000000..51ac495
--- /dev/null
+++ b/board/Marvell/db-88f6820-gp/db-88f6820-gp.c
@@ -0,0 +1,103 @@
+/*
+ * Copyright (C) 2015 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <asm/io.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/soc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define BIT(nr) (1UL << (nr))
+
+#define ETH_PHY_CTRL_REG 0
+#define ETH_PHY_CTRL_POWER_DOWN_BIT 11
+#define ETH_PHY_CTRL_POWER_DOWN_MASK (1 << ETH_PHY_CTRL_POWER_DOWN_BIT)
+
+/*
+ * Those values and defines are taken from the Marvell U-Boot version
+ * "u-boot-2013.01-2014_T3.0"
+ */
+#define DB_GP_88F68XX_GPP_OUT_ENA_LOW \
+ (~(BIT(1) | BIT(4) | BIT(6) | BIT(7) | BIT(8) | BIT(9) | \
+ BIT(10) | BIT(11) | BIT(19) | BIT(22) | BIT(23) | BIT(25) | \
+ BIT(26) | BIT(27) | BIT(29) | BIT(30) | BIT(31)))
+#define DB_GP_88F68XX_GPP_OUT_ENA_MID \
+ (~(BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(15) | \
+ BIT(16) | BIT(17) | BIT(18)))
+
+#define DB_GP_88F68XX_GPP_OUT_VAL_LOW 0x0
+#define DB_GP_88F68XX_GPP_OUT_VAL_MID 0x0
+#define DB_GP_88F68XX_GPP_POL_LOW 0x0
+#define DB_GP_88F68XX_GPP_POL_MID 0x0
+
+/* IO expander on Marvell GP board includes e.g. fan enabling */
+struct marvell_io_exp {
+ u8 chip;
+ u8 addr;
+ u8 val;
+};
+
+static struct marvell_io_exp io_exp[] = {
+ { 0x20, 6, 0x20 }, /* Configuration registers: Bit on --> Input bits */
+ { 0x20, 7, 0xC3 }, /* Configuration registers: Bit on --> Input bits */
+ { 0x20, 2, 0x1D }, /* Output Data, register#0 */
+ { 0x20, 3, 0x18 }, /* Output Data, register#1 */
+ { 0x21, 6, 0xC3 }, /* Configuration registers: Bit on --> Input bits */
+ { 0x21, 7, 0x31 }, /* Configuration registers: Bit on --> Input bits */
+ { 0x21, 2, 0x08 }, /* Output Data, register#0 */
+ { 0x21, 3, 0xC0 } /* Output Data, register#1 */
+};
+
+int board_early_init_f(void)
+{
+ /* Configure MPP */
+ writel(0x11111111, MVEBU_MPP_BASE + 0x00);
+ writel(0x11111111, MVEBU_MPP_BASE + 0x04);
+ writel(0x11244011, MVEBU_MPP_BASE + 0x08);
+ writel(0x22222111, MVEBU_MPP_BASE + 0x0c);
+ writel(0x22200002, MVEBU_MPP_BASE + 0x10);
+ writel(0x30042022, MVEBU_MPP_BASE + 0x14);
+ writel(0x55550555, MVEBU_MPP_BASE + 0x18);
+ writel(0x00005550, MVEBU_MPP_BASE + 0x1c);
+
+ /* Set GPP Out value */
+ writel(DB_GP_88F68XX_GPP_OUT_VAL_LOW, MVEBU_GPIO0_BASE + 0x00);
+ writel(DB_GP_88F68XX_GPP_OUT_VAL_MID, MVEBU_GPIO1_BASE + 0x00);
+
+ /* Set GPP Polarity */
+ writel(DB_GP_88F68XX_GPP_POL_LOW, MVEBU_GPIO0_BASE + 0x0c);
+ writel(DB_GP_88F68XX_GPP_POL_MID, MVEBU_GPIO1_BASE + 0x0c);
+
+ /* Set GPP Out Enable */
+ writel(DB_GP_88F68XX_GPP_OUT_ENA_LOW, MVEBU_GPIO0_BASE + 0x04);
+ writel(DB_GP_88F68XX_GPP_OUT_ENA_MID, MVEBU_GPIO1_BASE + 0x04);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ int i;
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
+
+ /* Init I2C IO expanders */
+ for (i = 0; i < ARRAY_SIZE(io_exp); i++)
+ i2c_write(io_exp[i].chip, io_exp[i].addr, 1, &io_exp[i].val, 1);
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ puts("Board: Marvell DB-88F6820-GP\n");
+
+ return 0;
+}
diff --git a/board/Marvell/db-88f6820-gp/kwbimage.cfg b/board/Marvell/db-88f6820-gp/kwbimage.cfg
new file mode 100644
index 0000000..e812454
--- /dev/null
+++ b/board/Marvell/db-88f6820-gp/kwbimage.cfg
@@ -0,0 +1,12 @@
+#
+# Copyright (C) 2014 Stefan Roese <sr@denx.de>
+#
+
+# Armada XP uses version 1 image format
+VERSION 1
+
+# Boot Media configurations
+BOOT_FROM spi
+
+# Binary Header (bin_hdr) with DDR3 training code
+BINARY board/Marvell/db-88f6820-gp/binary.0 0000005b 00000068
diff --git a/configs/db-88f6820-gp_defconfig b/configs/db-88f6820-gp_defconfig
new file mode 100644
index 0000000..0d6f0de
--- /dev/null
+++ b/configs/db-88f6820-gp_defconfig
@@ -0,0 +1,2 @@
+CONFIG_ARM=y
+CONFIG_TARGET_DB_88F6820_GP=y
diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
new file mode 100644
index 0000000..12a24ce
--- /dev/null
+++ b/include/configs/db-88f6820-gp.h
@@ -0,0 +1,72 @@
+/*
+ * Copyright (C) 2014 Stefan Roese <sr@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CONFIG_DB_88F6820_GP_H
+#define _CONFIG_DB_88F6820_GP_H
+
+/*
+ * High Level Configuration Options (easy to change)
+ */
+#define CONFIG_ARMADA_XP /* SOC Family Name */
+#define CONFIG_DB_88F6820_GP /* Board target name for DDR training */
+
+#define CONFIG_SYS_L2_PL310
+
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_DISPLAY_BOARDINFO_LATE
+
+#define CONFIG_SYS_TEXT_BASE 0x04000000
+#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_TFTPPUT
+#define CONFIG_CMD_TIME
+
+/* I2C */
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_MVTWSI
+#define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
+#define CONFIG_SYS_I2C_SLAVE 0x0
+#define CONFIG_SYS_I2C_SPEED 100000
+
+/* SPI NOR flash default params, used by sf commands */
+#define CONFIG_SF_DEFAULT_SPEED 1000000
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
+#define CONFIG_SPI_FLASH_STMICRO
+
+/* Environment in SPI NOR flash */
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */
+#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
+#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */
+
+#define CONFIG_PHY_MARVELL /* there is a marvell phy */
+#define CONFIG_PHY_ADDR { 1, 0 }
+#define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII
+#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
+
+#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
+#define CONFIG_SYS_ALT_MEMTEST
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+#endif /* _CONFIG_DB_88F6820_GP_H */