summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--README3
-rw-r--r--arch/arm/include/asm/arch-bcm2835/mbox.h14
-rw-r--r--board/raspberrypi/rpi_b/rpi_b.c29
-rw-r--r--drivers/usb/eth/asix.c1
-rw-r--r--drivers/usb/host/Makefile3
-rw-r--r--drivers/usb/host/dwc2.c1053
-rw-r--r--drivers/usb/host/dwc2.h782
-rw-r--r--include/configs/rpi_b.h21
-rw-r--r--include/linux/usb/musb.h2
-rw-r--r--include/usb.h3
10 files changed, 1903 insertions, 8 deletions
diff --git a/README b/README
index 3ff7932..2808dd1 100644
--- a/README
+++ b/README
@@ -1458,6 +1458,9 @@ The following options need to be configured:
CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the
txfilltuning field in the EHCI controller on reset.
+ CONFIG_USB_DWC2_REG_ADDR the physical CPU address of the DWC2
+ HW module registers.
+
- USB Device:
Define the below if you wish to use the USB console.
Once firmware is rebuilt from a serial console issue the
diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/include/asm/arch-bcm2835/mbox.h
index dded857..61f427d 100644
--- a/arch/arm/include/asm/arch-bcm2835/mbox.h
+++ b/arch/arm/include/asm/arch-bcm2835/mbox.h
@@ -119,6 +119,20 @@ struct bcm2835_mbox_tag_hdr {
* };
*/
+#define BCM2835_MBOX_TAG_GET_MAC_ADDRESS 0x00010003
+
+struct bcm2835_mbox_tag_get_mac_address {
+ struct bcm2835_mbox_tag_hdr tag_hdr;
+ union {
+ struct {
+ } req;
+ struct {
+ u8 mac[6];
+ u8 pad[2];
+ } resp;
+ } body;
+};
+
#define BCM2835_MBOX_TAG_GET_ARM_MEMORY 0x00010005
struct bcm2835_mbox_tag_get_arm_mem {
diff --git a/board/raspberrypi/rpi_b/rpi_b.c b/board/raspberrypi/rpi_b/rpi_b.c
index 447c940..7445f53 100644
--- a/board/raspberrypi/rpi_b/rpi_b.c
+++ b/board/raspberrypi/rpi_b/rpi_b.c
@@ -42,6 +42,12 @@ struct msg_get_arm_mem {
u32 end_tag;
};
+struct msg_get_mac_address {
+ struct bcm2835_mbox_hdr hdr;
+ struct bcm2835_mbox_tag_get_mac_address get_mac_address;
+ u32 end_tag;
+};
+
struct msg_set_power_state {
struct bcm2835_mbox_hdr hdr;
struct bcm2835_mbox_tag_set_power_state set_power_state;
@@ -73,6 +79,29 @@ int dram_init(void)
return 0;
}
+int misc_init_r(void)
+{
+ ALLOC_ALIGN_BUFFER(struct msg_get_mac_address, msg, 1, 16);
+ int ret;
+
+ if (getenv("usbethaddr"))
+ return 0;
+
+ BCM2835_MBOX_INIT_HDR(msg);
+ BCM2835_MBOX_INIT_TAG(&msg->get_mac_address, GET_MAC_ADDRESS);
+
+ ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
+ if (ret) {
+ printf("bcm2835: Could not query MAC address\n");
+ /* Ignore error; not critical */
+ return 0;
+ }
+
+ eth_setenv_enetaddr("usbethaddr", msg->get_mac_address.body.resp.mac);
+
+ return 0;
+}
+
static int power_on_module(u32 module)
{
ALLOC_ALIGN_BUFFER(struct msg_set_power_state, msg_pwr, 1, 16);
diff --git a/drivers/usb/eth/asix.c b/drivers/usb/eth/asix.c
index 6557055..1181109 100644
--- a/drivers/usb/eth/asix.c
+++ b/drivers/usb/eth/asix.c
@@ -580,6 +580,7 @@ static const struct asix_dongle asix_dongles[] = {
{ 0x2001, 0x3c05, FLAG_TYPE_AX88772 },
/* ASIX 88772B */
{ 0x0b95, 0x772b, FLAG_TYPE_AX88772B | FLAG_EEPROM_MAC },
+ { 0x0b95, 0x7e2b, FLAG_TYPE_AX88772B },
{ 0x0000, 0x0000, FLAG_NONE } /* END - Do not remove */
};
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index c4f5157..c9d2ed5 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -45,3 +45,6 @@ obj-$(CONFIG_USB_EHCI_ZYNQ) += ehci-zynq.o
obj-$(CONFIG_USB_XHCI) += xhci.o xhci-mem.o xhci-ring.o
obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
+
+# designware
+obj-$(CONFIG_USB_DWC2) += dwc2.o
diff --git a/drivers/usb/host/dwc2.c b/drivers/usb/host/dwc2.c
new file mode 100644
index 0000000..2a5bbf5
--- /dev/null
+++ b/drivers/usb/host/dwc2.c
@@ -0,0 +1,1053 @@
+/*
+ * Copyright (C) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <usb.h>
+#include <malloc.h>
+#include <usbroothubdes.h>
+#include <asm/io.h>
+
+#include "dwc2.h"
+
+/* Use only HC channel 0. */
+#define DWC2_HC_CHANNEL 0
+
+#define DWC2_STATUS_BUF_SIZE 64
+#define DWC2_DATA_BUF_SIZE (64 * 1024)
+
+/* We need doubleword-aligned buffers for DMA transfers */
+DEFINE_ALIGN_BUFFER(uint8_t, aligned_buffer, DWC2_DATA_BUF_SIZE, 8);
+DEFINE_ALIGN_BUFFER(uint8_t, status_buffer, DWC2_STATUS_BUF_SIZE, 8);
+
+#define MAX_DEVICE 16
+#define MAX_ENDPOINT 16
+static int bulk_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
+static int control_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
+
+static int root_hub_devnum;
+
+static struct dwc2_core_regs *regs =
+ (struct dwc2_core_regs *)CONFIG_USB_DWC2_REG_ADDR;
+
+/*
+ * DWC2 IP interface
+ */
+static int wait_for_bit(void *reg, const uint32_t mask, bool set)
+{
+ unsigned int timeout = 1000000;
+ uint32_t val;
+
+ while (--timeout) {
+ val = readl(reg);
+ if (!set)
+ val = ~val;
+
+ if ((val & mask) == mask)
+ return 0;
+
+ udelay(1);
+ }
+
+ debug("%s: Timeout (reg=%p mask=%08x wait_set=%i)\n",
+ __func__, reg, mask, set);
+
+ return -ETIMEDOUT;
+}
+
+/*
+ * Initializes the FSLSPClkSel field of the HCFG register
+ * depending on the PHY type.
+ */
+static void init_fslspclksel(struct dwc2_core_regs *regs)
+{
+ uint32_t phyclk;
+
+#if (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS)
+ phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ; /* Full speed PHY */
+#else
+ /* High speed PHY running at full speed or high speed */
+ phyclk = DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ;
+#endif
+
+#ifdef CONFIG_DWC2_ULPI_FS_LS
+ uint32_t hwcfg2 = readl(&regs->ghwcfg2);
+ uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >>
+ DWC2_HWCFG2_HS_PHY_TYPE_OFFSET;
+ uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >>
+ DWC2_HWCFG2_FS_PHY_TYPE_OFFSET;
+
+ if (hval == 2 && fval == 1)
+ phyclk = DWC2_HCFG_FSLSPCLKSEL_48_MHZ; /* Full speed PHY */
+#endif
+
+ clrsetbits_le32(&regs->host_regs.hcfg,
+ DWC2_HCFG_FSLSPCLKSEL_MASK,
+ phyclk << DWC2_HCFG_FSLSPCLKSEL_OFFSET);
+}
+
+/*
+ * Flush a Tx FIFO.
+ *
+ * @param regs Programming view of DWC_otg controller.
+ * @param num Tx FIFO to flush.
+ */
+static void dwc_otg_flush_tx_fifo(struct dwc2_core_regs *regs, const int num)
+{
+ int ret;
+
+ writel(DWC2_GRSTCTL_TXFFLSH | (num << DWC2_GRSTCTL_TXFNUM_OFFSET),
+ &regs->grstctl);
+ ret = wait_for_bit(&regs->grstctl, DWC2_GRSTCTL_TXFFLSH, 0);
+ if (ret)
+ printf("%s: Timeout!\n", __func__);
+
+ /* Wait for 3 PHY Clocks */
+ udelay(1);
+}
+
+/*
+ * Flush Rx FIFO.
+ *
+ * @param regs Programming view of DWC_otg controller.
+ */
+static void dwc_otg_flush_rx_fifo(struct dwc2_core_regs *regs)
+{
+ int ret;
+
+ writel(DWC2_GRSTCTL_RXFFLSH, &regs->grstctl);
+ ret = wait_for_bit(&regs->grstctl, DWC2_GRSTCTL_RXFFLSH, 0);
+ if (ret)
+ printf("%s: Timeout!\n", __func__);
+
+ /* Wait for 3 PHY Clocks */
+ udelay(1);
+}
+
+/*
+ * Do core a soft reset of the core. Be careful with this because it
+ * resets all the internal state machines of the core.
+ */
+static void dwc_otg_core_reset(struct dwc2_core_regs *regs)
+{
+ int ret;
+
+ /* Wait for AHB master IDLE state. */
+ ret = wait_for_bit(&regs->grstctl, DWC2_GRSTCTL_AHBIDLE, 1);
+ if (ret)
+ printf("%s: Timeout!\n", __func__);
+
+ /* Core Soft Reset */
+ writel(DWC2_GRSTCTL_CSFTRST, &regs->grstctl);
+ ret = wait_for_bit(&regs->grstctl, DWC2_GRSTCTL_CSFTRST, 0);
+ if (ret)
+ printf("%s: Timeout!\n", __func__);
+
+ /*
+ * Wait for core to come out of reset.
+ * NOTE: This long sleep is _very_ important, otherwise the core will
+ * not stay in host mode after a connector ID change!
+ */
+ mdelay(100);
+}
+
+/*
+ * This function initializes the DWC_otg controller registers for
+ * host mode.
+ *
+ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
+ * request queues. Host channels are reset to ensure that they are ready for
+ * performing transfers.
+ *
+ * @param regs Programming view of DWC_otg controller
+ *
+ */
+static void dwc_otg_core_host_init(struct dwc2_core_regs *regs)
+{
+ uint32_t nptxfifosize = 0;
+ uint32_t ptxfifosize = 0;
+ uint32_t hprt0 = 0;
+ int i, ret, num_channels;
+
+ /* Restart the Phy Clock */
+ writel(0, &regs->pcgcctl);
+
+ /* Initialize Host Configuration Register */
+ init_fslspclksel(regs);
+#ifdef CONFIG_DWC2_DFLT_SPEED_FULL
+ setbits_le32(&regs->host_regs.hcfg, DWC2_HCFG_FSLSSUPP);
+#endif
+
+ /* Configure data FIFO sizes */
+#ifdef CONFIG_DWC2_ENABLE_DYNAMIC_FIFO
+ if (readl(&regs->ghwcfg2) & DWC2_HWCFG2_DYNAMIC_FIFO) {
+ /* Rx FIFO */
+ writel(CONFIG_DWC2_HOST_RX_FIFO_SIZE, &regs->grxfsiz);
+
+ /* Non-periodic Tx FIFO */
+ nptxfifosize |= CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE <<
+ DWC2_FIFOSIZE_DEPTH_OFFSET;
+ nptxfifosize |= CONFIG_DWC2_HOST_RX_FIFO_SIZE <<
+ DWC2_FIFOSIZE_STARTADDR_OFFSET;
+ writel(nptxfifosize, &regs->gnptxfsiz);
+
+ /* Periodic Tx FIFO */
+ ptxfifosize |= CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE <<
+ DWC2_FIFOSIZE_DEPTH_OFFSET;
+ ptxfifosize |= (CONFIG_DWC2_HOST_RX_FIFO_SIZE +
+ CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE) <<
+ DWC2_FIFOSIZE_STARTADDR_OFFSET;
+ writel(ptxfifosize, &regs->hptxfsiz);
+ }
+#endif
+
+ /* Clear Host Set HNP Enable in the OTG Control Register */
+ clrbits_le32(&regs->gotgctl, DWC2_GOTGCTL_HSTSETHNPEN);
+
+ /* Make sure the FIFOs are flushed. */
+ dwc_otg_flush_tx_fifo(regs, 0x10); /* All Tx FIFOs */
+ dwc_otg_flush_rx_fifo(regs);
+
+ /* Flush out any leftover queued requests. */
+ num_channels = readl(&regs->ghwcfg2);
+ num_channels &= DWC2_HWCFG2_NUM_HOST_CHAN_MASK;
+ num_channels >>= DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET;
+ num_channels += 1;
+
+ for (i = 0; i < num_channels; i++)
+ clrsetbits_le32(&regs->hc_regs[i].hcchar,
+ DWC2_HCCHAR_CHEN | DWC2_HCCHAR_EPDIR,
+ DWC2_HCCHAR_CHDIS);
+
+ /* Halt all channels to put them into a known state. */
+ for (i = 0; i < num_channels; i++) {
+ clrsetbits_le32(&regs->hc_regs[i].hcchar,
+ DWC2_HCCHAR_EPDIR,
+ DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS);
+ ret = wait_for_bit(&regs->hc_regs[i].hcchar,
+ DWC2_HCCHAR_CHEN, 0);
+ if (ret)
+ printf("%s: Timeout!\n", __func__);
+ }
+
+ /* Turn on the vbus power. */
+ if (readl(&regs->gintsts) & DWC2_GINTSTS_CURMODE_HOST) {
+ hprt0 = readl(&regs->hprt0);
+ hprt0 &= ~(DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET);
+ hprt0 &= ~(DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG);
+ if (!(hprt0 & DWC2_HPRT0_PRTPWR)) {
+ hprt0 |= DWC2_HPRT0_PRTPWR;
+ writel(hprt0, &regs->hprt0);
+ }
+ }
+}
+
+/*
+ * This function initializes the DWC_otg controller registers and
+ * prepares the core for device mode or host mode operation.
+ *
+ * @param regs Programming view of the DWC_otg controller
+ */
+static void dwc_otg_core_init(struct dwc2_core_regs *regs)
+{
+ uint32_t ahbcfg = 0;
+ uint32_t usbcfg = 0;
+ uint8_t brst_sz = CONFIG_DWC2_DMA_BURST_SIZE;
+
+ /* Common Initialization */
+ usbcfg = readl(&regs->gusbcfg);
+
+ /* Program the ULPI External VBUS bit if needed */
+#ifdef CONFIG_DWC2_PHY_ULPI_EXT_VBUS
+ usbcfg |= DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
+#else
+ usbcfg &= ~DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV;
+#endif
+
+ /* Set external TS Dline pulsing */
+#ifdef CONFIG_DWC2_TS_DLINE
+ usbcfg |= DWC2_GUSBCFG_TERM_SEL_DL_PULSE;
+#else
+ usbcfg &= ~DWC2_GUSBCFG_TERM_SEL_DL_PULSE;
+#endif
+ writel(usbcfg, &regs->gusbcfg);
+
+ /* Reset the Controller */
+ dwc_otg_core_reset(regs);
+
+ /*
+ * This programming sequence needs to happen in FS mode before
+ * any other programming occurs
+ */
+#if defined(CONFIG_DWC2_DFLT_SPEED_FULL) && \
+ (CONFIG_DWC2_PHY_TYPE == DWC2_PHY_TYPE_FS)
+ /* If FS mode with FS PHY */
+ setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_PHYSEL);
+
+ /* Reset after a PHY select */
+ dwc_otg_core_reset(regs);
+
+ /*
+ * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.
+ * Also do this on HNP Dev/Host mode switches (done in dev_init
+ * and host_init).
+ */
+ if (readl(&regs->gintsts) & DWC2_GINTSTS_CURMODE_HOST)
+ init_fslspclksel(regs);
+
+#ifdef CONFIG_DWC2_I2C_ENABLE
+ /* Program GUSBCFG.OtgUtmifsSel to I2C */
+ setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_OTGUTMIFSSEL);
+
+ /* Program GI2CCTL.I2CEn */
+ clrsetbits_le32(&regs->gi2cctl, DWC2_GI2CCTL_I2CEN |
+ DWC2_GI2CCTL_I2CDEVADDR_MASK,
+ 1 << DWC2_GI2CCTL_I2CDEVADDR_OFFSET);
+ setbits_le32(&regs->gi2cctl, DWC2_GI2CCTL_I2CEN);
+#endif
+
+#else
+ /* High speed PHY. */
+
+ /*
+ * HS PHY parameters. These parameters are preserved during
+ * soft reset so only program the first time. Do a soft reset
+ * immediately after setting phyif.
+ */
+ usbcfg &= ~(DWC2_GUSBCFG_ULPI_UTMI_SEL | DWC2_GUSBCFG_PHYIF);
+ usbcfg |= CONFIG_DWC2_PHY_TYPE << DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET;
+
+ if (usbcfg & DWC2_GUSBCFG_ULPI_UTMI_SEL) { /* ULPI interface */
+#ifdef CONFIG_DWC2_PHY_ULPI_DDR
+ usbcfg |= DWC2_GUSBCFG_DDRSEL;
+#else
+ usbcfg &= ~DWC2_GUSBCFG_DDRSEL;
+#endif
+ } else { /* UTMI+ interface */
+#if (CONFIG_DWC2_UTMI_PHY_WIDTH == 16)
+ usbcfg |= DWC2_GUSBCFG_PHYIF;
+#endif
+ }
+
+ writel(usbcfg, &regs->gusbcfg);
+
+ /* Reset after setting the PHY parameters */
+ dwc_otg_core_reset(regs);
+#endif
+
+ usbcfg = readl(&regs->gusbcfg);
+ usbcfg &= ~(DWC2_GUSBCFG_ULPI_FSLS | DWC2_GUSBCFG_ULPI_CLK_SUS_M);
+#ifdef CONFIG_DWC2_ULPI_FS_LS
+ uint32_t hwcfg2 = readl(&regs->ghwcfg2);
+ uint32_t hval = (ghwcfg2 & DWC2_HWCFG2_HS_PHY_TYPE_MASK) >>
+ DWC2_HWCFG2_HS_PHY_TYPE_OFFSET;
+ uint32_t fval = (ghwcfg2 & DWC2_HWCFG2_FS_PHY_TYPE_MASK) >>
+ DWC2_HWCFG2_FS_PHY_TYPE_OFFSET;
+ if (hval == 2 && fval == 1) {
+ usbcfg |= DWC2_GUSBCFG_ULPI_FSLS;
+ usbcfg |= DWC2_GUSBCFG_ULPI_CLK_SUS_M;
+ }
+#endif
+ writel(usbcfg, &regs->gusbcfg);
+
+ /* Program the GAHBCFG Register. */
+ switch (readl(&regs->ghwcfg2) & DWC2_HWCFG2_ARCHITECTURE_MASK) {
+ case DWC2_HWCFG2_ARCHITECTURE_SLAVE_ONLY:
+ break;
+ case DWC2_HWCFG2_ARCHITECTURE_EXT_DMA:
+ while (brst_sz > 1) {
+ ahbcfg |= ahbcfg + (1 << DWC2_GAHBCFG_HBURSTLEN_OFFSET);
+ ahbcfg &= DWC2_GAHBCFG_HBURSTLEN_MASK;
+ brst_sz >>= 1;
+ }
+
+#ifdef CONFIG_DWC2_DMA_ENABLE
+ ahbcfg |= DWC2_GAHBCFG_DMAENABLE;
+#endif
+ break;
+
+ case DWC2_HWCFG2_ARCHITECTURE_INT_DMA:
+ ahbcfg |= DWC2_GAHBCFG_HBURSTLEN_INCR4;
+#ifdef CONFIG_DWC2_DMA_ENABLE
+ ahbcfg |= DWC2_GAHBCFG_DMAENABLE;
+#endif
+ break;
+ }
+
+ writel(ahbcfg, &regs->gahbcfg);
+
+ /* Program the GUSBCFG register for HNP/SRP. */
+ setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_HNPCAP | DWC2_GUSBCFG_SRPCAP);
+
+#ifdef CONFIG_DWC2_IC_USB_CAP
+ setbits_le32(&regs->gusbcfg, DWC2_GUSBCFG_IC_USB_CAP);
+#endif
+}
+
+/*
+ * Prepares a host channel for transferring packets to/from a specific
+ * endpoint. The HCCHARn register is set up with the characteristics specified
+ * in _hc. Host channel interrupts that may need to be serviced while this
+ * transfer is in progress are enabled.
+ *
+ * @param regs Programming view of DWC_otg controller
+ * @param hc Information needed to initialize the host channel
+ */
+static void dwc_otg_hc_init(struct dwc2_core_regs *regs, uint8_t hc_num,
+ uint8_t dev_addr, uint8_t ep_num, uint8_t ep_is_in,
+ uint8_t ep_type, uint16_t max_packet)
+{
+ struct dwc2_hc_regs *hc_regs = &regs->hc_regs[hc_num];
+ const uint32_t hcchar = (dev_addr << DWC2_HCCHAR_DEVADDR_OFFSET) |
+ (ep_num << DWC2_HCCHAR_EPNUM_OFFSET) |
+ (ep_is_in << DWC2_HCCHAR_EPDIR_OFFSET) |
+ (ep_type << DWC2_HCCHAR_EPTYPE_OFFSET) |
+ (max_packet << DWC2_HCCHAR_MPS_OFFSET);
+
+ /* Clear old interrupt conditions for this host channel. */
+ writel(0x3fff, &hc_regs->hcint);
+
+ /*
+ * Program the HCCHARn register with the endpoint characteristics
+ * for the current transfer.
+ */
+ writel(hcchar, &hc_regs->hcchar);
+
+ /* Program the HCSPLIT register for SPLITs */
+ writel(0, &hc_regs->hcsplt);
+}
+
+/*
+ * DWC2 to USB API interface
+ */
+/* Direction: In ; Request: Status */
+static int dwc_otg_submit_rh_msg_in_status(struct usb_device *dev, void *buffer,
+ int txlen, struct devrequest *cmd)
+{
+ uint32_t hprt0 = 0;
+ uint32_t port_status = 0;
+ uint32_t port_change = 0;
+ int len = 0;
+ int stat = 0;
+
+ switch (cmd->requesttype & ~USB_DIR_IN) {
+ case 0:
+ *(uint16_t *)buffer = cpu_to_le16(1);
+ len = 2;
+ break;
+ case USB_RECIP_INTERFACE:
+ case USB_RECIP_ENDPOINT:
+ *(uint16_t *)buffer = cpu_to_le16(0);
+ len = 2;
+ break;
+ case USB_TYPE_CLASS:
+ *(uint32_t *)buffer = cpu_to_le32(0);
+ len = 4;
+ break;
+ case USB_RECIP_OTHER | USB_TYPE_CLASS:
+ hprt0 = readl(&regs->hprt0);
+ if (hprt0 & DWC2_HPRT0_PRTCONNSTS)
+ port_status |= USB_PORT_STAT_CONNECTION;
+ if (hprt0 & DWC2_HPRT0_PRTENA)
+ port_status |= USB_PORT_STAT_ENABLE;
+ if (hprt0 & DWC2_HPRT0_PRTSUSP)
+ port_status |= USB_PORT_STAT_SUSPEND;
+ if (hprt0 & DWC2_HPRT0_PRTOVRCURRACT)
+ port_status |= USB_PORT_STAT_OVERCURRENT;
+ if (hprt0 & DWC2_HPRT0_PRTRST)
+ port_status |= USB_PORT_STAT_RESET;
+ if (hprt0 & DWC2_HPRT0_PRTPWR)
+ port_status |= USB_PORT_STAT_POWER;
+
+ port_status |= USB_PORT_STAT_HIGH_SPEED;
+
+ if (hprt0 & DWC2_HPRT0_PRTENCHNG)
+ port_change |= USB_PORT_STAT_C_ENABLE;
+ if (hprt0 & DWC2_HPRT0_PRTCONNDET)
+ port_change |= USB_PORT_STAT_C_CONNECTION;
+ if (hprt0 & DWC2_HPRT0_PRTOVRCURRCHNG)
+ port_change |= USB_PORT_STAT_C_OVERCURRENT;
+
+ *(uint32_t *)buffer = cpu_to_le32(port_status |
+ (port_change << 16));
+ len = 4;
+ break;
+ default:
+ puts("unsupported root hub command\n");
+ stat = USB_ST_STALLED;
+ }
+
+ dev->act_len = min(len, txlen);
+ dev->status = stat;
+
+ return stat;
+}
+
+/* Direction: In ; Request: Descriptor */
+static int dwc_otg_submit_rh_msg_in_descriptor(struct usb_device *dev,
+ void *buffer, int txlen,
+ struct devrequest *cmd)
+{
+ unsigned char data[32];
+ uint32_t dsc;
+ int len = 0;
+ int stat = 0;
+ uint16_t wValue = cpu_to_le16(cmd->value);
+ uint16_t wLength = cpu_to_le16(cmd->length);
+
+ switch (cmd->requesttype & ~USB_DIR_IN) {
+ case 0:
+ switch (wValue & 0xff00) {
+ case 0x0100: /* device descriptor */
+ len = min3(txlen, sizeof(root_hub_dev_des), wLength);
+ memcpy(buffer, root_hub_dev_des, len);
+ break;
+ case 0x0200: /* configuration descriptor */
+ len = min3(txlen, sizeof(root_hub_config_des), wLength);
+ memcpy(buffer, root_hub_config_des, len);
+ break;
+ case 0x0300: /* string descriptors */
+ switch (wValue & 0xff) {
+ case 0x00:
+ len = min3(txlen, sizeof(root_hub_str_index0),
+ wLength);
+ memcpy(buffer, root_hub_str_index0, len);
+ break;
+ case 0x01:
+ len = min3(txlen, sizeof(root_hub_str_index1),
+ wLength);
+ memcpy(buffer, root_hub_str_index1, len);
+ break;
+ }
+ break;
+ default:
+ stat = USB_ST_STALLED;
+ }
+ break;
+
+ case USB_TYPE_CLASS:
+ /* Root port config, set 1 port and nothing else. */
+ dsc = 0x00000001;
+
+ data[0] = 9; /* min length; */
+ data[1] = 0x29;
+ data[2] = dsc & RH_A_NDP;
+ data[3] = 0;
+ if (dsc & RH_A_PSM)
+ data[3] |= 0x1;
+ if (dsc & RH_A_NOCP)
+ data[3] |= 0x10;
+ else if (dsc & RH_A_OCPM)
+ data[3] |= 0x8;
+
+ /* corresponds to data[4-7] */
+ data[5] = (dsc & RH_A_POTPGT) >> 24;
+ data[7] = dsc & RH_B_DR;
+ if (data[2] < 7) {
+ data[8] = 0xff;
+ } else {
+ data[0] += 2;
+ data[8] = (dsc & RH_B_DR) >> 8;
+ data[9] = 0xff;
+ data[10] = data[9];
+ }
+
+ len = min3(txlen, data[0], wLength);
+ memcpy(buffer, data, len);
+ break;
+ default:
+ puts("unsupported root hub command\n");
+ stat = USB_ST_STALLED;
+ }
+
+ dev->act_len = min(len, txlen);
+ dev->status = stat;
+
+ return stat;
+}
+
+/* Direction: In ; Request: Configuration */
+static int dwc_otg_submit_rh_msg_in_configuration(struct usb_device *dev,
+ void *buffer, int txlen,
+ struct devrequest *cmd)
+{
+ int len = 0;
+ int stat = 0;
+
+ switch (cmd->requesttype & ~USB_DIR_IN) {
+ case 0:
+ *(uint8_t *)buffer = 0x01;
+ len = 1;
+ break;
+ default:
+ puts("unsupported root hub command\n");
+ stat = USB_ST_STALLED;
+ }
+
+ dev->act_len = min(len, txlen);
+ dev->status = stat;
+
+ return stat;
+}
+
+/* Direction: In */
+static int dwc_otg_submit_rh_msg_in(struct usb_device *dev,
+ void *buffer, int txlen,
+ struct devrequest *cmd)
+{
+ switch (cmd->request) {
+ case USB_REQ_GET_STATUS:
+ return dwc_otg_submit_rh_msg_in_status(dev, buffer,
+ txlen, cmd);
+ case USB_REQ_GET_DESCRIPTOR:
+ return dwc_otg_submit_rh_msg_in_descriptor(dev, buffer,
+ txlen, cmd);
+ case USB_REQ_GET_CONFIGURATION:
+ return dwc_otg_submit_rh_msg_in_configuration(dev, buffer,
+ txlen, cmd);
+ default:
+ puts("unsupported root hub command\n");
+ return USB_ST_STALLED;
+ }
+}
+
+/* Direction: Out */
+static int dwc_otg_submit_rh_msg_out(struct usb_device *dev,
+ void *buffer, int txlen,
+ struct devrequest *cmd)
+{
+ int len = 0;
+ int stat = 0;
+ uint16_t bmrtype_breq = cmd->requesttype | (cmd->request << 8);
+ uint16_t wValue = cpu_to_le16(cmd->value);
+
+ switch (bmrtype_breq & ~USB_DIR_IN) {
+ case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_ENDPOINT:
+ case (USB_REQ_CLEAR_FEATURE << 8) | USB_TYPE_CLASS:
+ break;
+
+ case (USB_REQ_CLEAR_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS:
+ switch (wValue) {
+ case USB_PORT_FEAT_C_CONNECTION:
+ setbits_le32(&regs->hprt0, DWC2_HPRT0_PRTCONNDET);
+ break;
+ }
+ break;
+
+ case (USB_REQ_SET_FEATURE << 8) | USB_RECIP_OTHER | USB_TYPE_CLASS:
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ break;
+
+ case USB_PORT_FEAT_RESET:
+ clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
+ DWC2_HPRT0_PRTCONNDET |
+ DWC2_HPRT0_PRTENCHNG |
+ DWC2_HPRT0_PRTOVRCURRCHNG,
+ DWC2_HPRT0_PRTRST);
+ mdelay(50);
+ clrbits_le32(&regs->hprt0, DWC2_HPRT0_PRTRST);
+ break;
+
+ case USB_PORT_FEAT_POWER:
+ clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
+ DWC2_HPRT0_PRTCONNDET |
+ DWC2_HPRT0_PRTENCHNG |
+ DWC2_HPRT0_PRTOVRCURRCHNG,
+ DWC2_HPRT0_PRTRST);
+ break;
+
+ case USB_PORT_FEAT_ENABLE:
+ break;
+ }
+ break;
+ case (USB_REQ_SET_ADDRESS << 8):
+ root_hub_devnum = wValue;
+ break;
+ case (USB_REQ_SET_CONFIGURATION << 8):
+ break;
+ default:
+ puts("unsupported root hub command\n");
+ stat = USB_ST_STALLED;
+ }
+
+ len = min(len, txlen);
+
+ dev->act_len = len;
+ dev->status = stat;
+
+ return stat;
+}
+
+static int dwc_otg_submit_rh_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int txlen,
+ struct devrequest *cmd)
+{
+ int stat = 0;
+
+ if (usb_pipeint(pipe)) {
+ puts("Root-Hub submit IRQ: NOT implemented\n");
+ return 0;
+ }
+
+ if (cmd->requesttype & USB_DIR_IN)
+ stat = dwc_otg_submit_rh_msg_in(dev, buffer, txlen, cmd);
+ else
+ stat = dwc_otg_submit_rh_msg_out(dev, buffer, txlen, cmd);
+
+ mdelay(1);
+
+ return stat;
+}
+
+/* U-Boot USB transmission interface */
+int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len)
+{
+ int devnum = usb_pipedevice(pipe);
+ int ep = usb_pipeendpoint(pipe);
+ int max = usb_maxpacket(dev, pipe);
+ int done = 0;
+ uint32_t hctsiz, sub, tmp;
+ struct dwc2_hc_regs *hc_regs = &regs->hc_regs[DWC2_HC_CHANNEL];
+ uint32_t hcint;
+ uint32_t xfer_len;
+ uint32_t num_packets;
+ int stop_transfer = 0;
+ unsigned int timeout = 1000000;
+
+ if (devnum == root_hub_devnum) {
+ dev->status = 0;
+ return -EINVAL;
+ }
+
+ if (len > DWC2_DATA_BUF_SIZE) {
+ printf("%s: %d is more then available buffer size (%d)\n",
+ __func__, len, DWC2_DATA_BUF_SIZE);
+ dev->status = 0;
+ dev->act_len = 0;
+ return -EINVAL;
+ }
+
+ while ((done < len) && !stop_transfer) {
+ /* Initialize channel */
+ dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep,
+ usb_pipein(pipe), DWC2_HCCHAR_EPTYPE_BULK, max);
+
+ xfer_len = len - done;
+ /* Make sure that xfer_len is a multiple of max packet size. */
+ if (xfer_len > CONFIG_DWC2_MAX_TRANSFER_SIZE)
+ xfer_len = CONFIG_DWC2_MAX_TRANSFER_SIZE - max + 1;
+
+ if (xfer_len > 0) {
+ num_packets = (xfer_len + max - 1) / max;
+ if (num_packets > CONFIG_DWC2_MAX_PACKET_COUNT) {
+ num_packets = CONFIG_DWC2_MAX_PACKET_COUNT;
+ xfer_len = num_packets * max;
+ }
+ } else {
+ num_packets = 1;
+ }
+
+ if (usb_pipein(pipe))
+ xfer_len = num_packets * max;
+
+ writel((xfer_len << DWC2_HCTSIZ_XFERSIZE_OFFSET) |
+ (num_packets << DWC2_HCTSIZ_PKTCNT_OFFSET) |
+ (bulk_data_toggle[devnum][ep] <<
+ DWC2_HCTSIZ_PID_OFFSET),
+ &hc_regs->hctsiz);
+
+ memcpy(aligned_buffer, (char *)buffer + done, len - done);
+ writel((uint32_t)aligned_buffer, &hc_regs->hcdma);
+
+ /* Set host channel enable after all other setup is complete. */
+ clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK |
+ DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS,
+ (1 << DWC2_HCCHAR_MULTICNT_OFFSET) |
+ DWC2_HCCHAR_CHEN);
+
+ while (1) {
+ hcint = readl(&hc_regs->hcint);
+
+ if (!(hcint & DWC2_HCINT_CHHLTD))
+ continue;
+
+ if (hcint & DWC2_HCINT_XFERCOMP) {
+ hctsiz = readl(&hc_regs->hctsiz);
+ done += xfer_len;
+
+ sub = hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK;
+ sub >>= DWC2_HCTSIZ_XFERSIZE_OFFSET;
+
+ if (usb_pipein(pipe)) {
+ done -= sub;
+ if (hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK)
+ stop_transfer = 1;
+ }
+
+ tmp = hctsiz & DWC2_HCTSIZ_PID_MASK;
+ tmp >>= DWC2_HCTSIZ_PID_OFFSET;
+ if (tmp == DWC2_HC_PID_DATA1) {
+ bulk_data_toggle[devnum][ep] =
+ DWC2_HC_PID_DATA1;
+ } else {
+ bulk_data_toggle[devnum][ep] =
+ DWC2_HC_PID_DATA0;
+ }
+ break;
+ }
+
+ if (hcint & DWC2_HCINT_STALL) {
+ puts("DWC OTG: Channel halted\n");
+ bulk_data_toggle[devnum][ep] =
+ DWC2_HC_PID_DATA0;
+
+ stop_transfer = 1;
+ break;
+ }
+
+ if (!--timeout) {
+ printf("%s: Timeout!\n", __func__);
+ break;
+ }
+ }
+ }
+
+ if (done && usb_pipein(pipe))
+ memcpy(buffer, aligned_buffer, done);
+
+ writel(0, &hc_regs->hcintmsk);
+ writel(0xFFFFFFFF, &hc_regs->hcint);
+
+ dev->status = 0;
+ dev->act_len = done;
+
+ return 0;
+}
+
+int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, struct devrequest *setup)
+{
+ struct dwc2_hc_regs *hc_regs = &regs->hc_regs[DWC2_HC_CHANNEL];
+ int done = 0;
+ int devnum = usb_pipedevice(pipe);
+ int ep = usb_pipeendpoint(pipe);
+ int max = usb_maxpacket(dev, pipe);
+ uint32_t hctsiz = 0, sub, tmp, ret;
+ uint32_t hcint;
+ const uint32_t hcint_comp_hlt_ack = DWC2_HCINT_XFERCOMP |
+ DWC2_HCINT_CHHLTD | DWC2_HCINT_ACK;
+ unsigned int timeout = 1000000;
+
+ /* For CONTROL endpoint pid should start with DATA1 */
+ int status_direction;
+
+ if (devnum == root_hub_devnum) {
+ dev->status = 0;
+ dev->speed = USB_SPEED_HIGH;
+ return dwc_otg_submit_rh_msg(dev, pipe, buffer, len, setup);
+ }
+
+ if (len > DWC2_DATA_BUF_SIZE) {
+ printf("%s: %d is more then available buffer size(%d)\n",
+ __func__, len, DWC2_DATA_BUF_SIZE);
+ dev->status = 0;
+ dev->act_len = 0;
+ return -EINVAL;
+ }
+
+ /* Initialize channel, OUT for setup buffer */
+ dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep, 0,
+ DWC2_HCCHAR_EPTYPE_CONTROL, max);
+
+ /* SETUP stage */
+ writel((8 << DWC2_HCTSIZ_XFERSIZE_OFFSET) |
+ (1 << DWC2_HCTSIZ_PKTCNT_OFFSET) |
+ (DWC2_HC_PID_SETUP << DWC2_HCTSIZ_PID_OFFSET),
+ &hc_regs->hctsiz);
+
+ writel((uint32_t)setup, &hc_regs->hcdma);
+
+ /* Set host channel enable after all other setup is complete. */
+ clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK |
+ DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS,
+ (1 << DWC2_HCCHAR_MULTICNT_OFFSET) | DWC2_HCCHAR_CHEN);
+
+ ret = wait_for_bit(&hc_regs->hcint, DWC2_HCINT_CHHLTD, 1);
+ if (ret)
+ printf("%s: Timeout!\n", __func__);
+
+ hcint = readl(&hc_regs->hcint);
+
+ if (!(hcint & DWC2_HCINT_CHHLTD) || !(hcint & DWC2_HCINT_XFERCOMP)) {
+ printf("%s: Error (HCINT=%08x)\n", __func__, hcint);
+ dev->status = 0;
+ dev->act_len = 0;
+ return -EINVAL;
+ }
+
+ /* Clear interrupts */
+ writel(0, &hc_regs->hcintmsk);
+ writel(0xFFFFFFFF, &hc_regs->hcint);
+
+ if (buffer) {
+ /* DATA stage */
+ dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep,
+ usb_pipein(pipe),
+ DWC2_HCCHAR_EPTYPE_CONTROL, max);
+
+ /* TODO: check if len < 64 */
+ control_data_toggle[devnum][ep] = DWC2_HC_PID_DATA1;
+ writel((len << DWC2_HCTSIZ_XFERSIZE_OFFSET) |
+ (1 << DWC2_HCTSIZ_PKTCNT_OFFSET) |
+ (control_data_toggle[devnum][ep] <<
+ DWC2_HCTSIZ_PID_OFFSET),
+ &hc_regs->hctsiz);
+
+ writel((uint32_t)buffer, &hc_regs->hcdma);
+
+ /* Set host channel enable after all other setup is complete */
+ clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK |
+ DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS,
+ (1 << DWC2_HCCHAR_MULTICNT_OFFSET) |
+ DWC2_HCCHAR_CHEN);
+
+ while (1) {
+ hcint = readl(&hc_regs->hcint);
+ if (!(hcint & DWC2_HCINT_CHHLTD))
+ continue;
+
+ if (hcint & DWC2_HCINT_XFERCOMP) {
+ hctsiz = readl(&hc_regs->hctsiz);
+ done = len;
+
+ sub = hctsiz & DWC2_HCTSIZ_XFERSIZE_MASK;
+ sub >>= DWC2_HCTSIZ_XFERSIZE_OFFSET;
+
+ if (usb_pipein(pipe))
+ done -= sub;
+ }
+
+ if (hcint & DWC2_HCINT_ACK) {
+ tmp = hctsiz & DWC2_HCTSIZ_PID_MASK;
+ tmp >>= DWC2_HCTSIZ_PID_OFFSET;
+ if (tmp == DWC2_HC_PID_DATA0) {
+ control_data_toggle[devnum][ep] =
+ DWC2_HC_PID_DATA0;
+ } else {
+ control_data_toggle[devnum][ep] =
+ DWC2_HC_PID_DATA1;
+ }
+ }
+
+ if (hcint != hcint_comp_hlt_ack) {
+ printf("%s: Error (HCINT=%08x)\n",
+ __func__, hcint);
+ goto out;
+ }
+
+ if (!--timeout) {
+ printf("%s: Timeout!\n", __func__);
+ goto out;
+ }
+
+ break;
+ }
+ } /* End of DATA stage */
+
+ /* STATUS stage */
+ if ((len == 0) || usb_pipeout(pipe))
+ status_direction = 1;
+ else
+ status_direction = 0;
+
+ dwc_otg_hc_init(regs, DWC2_HC_CHANNEL, devnum, ep,
+ status_direction, DWC2_HCCHAR_EPTYPE_CONTROL, max);
+
+ writel((1 << DWC2_HCTSIZ_PKTCNT_OFFSET) |
+ (DWC2_HC_PID_DATA1 << DWC2_HCTSIZ_PID_OFFSET),
+ &hc_regs->hctsiz);
+
+ writel((uint32_t)status_buffer, &hc_regs->hcdma);
+
+ /* Set host channel enable after all other setup is complete. */
+ clrsetbits_le32(&hc_regs->hcchar, DWC2_HCCHAR_MULTICNT_MASK |
+ DWC2_HCCHAR_CHEN | DWC2_HCCHAR_CHDIS,
+ (1 << DWC2_HCCHAR_MULTICNT_OFFSET) | DWC2_HCCHAR_CHEN);
+
+ while (1) {
+ hcint = readl(&hc_regs->hcint);
+ if (hcint & DWC2_HCINT_CHHLTD)
+ break;
+ }
+
+ if (hcint != hcint_comp_hlt_ack)
+ printf("%s: Error (HCINT=%08x)\n", __func__, hcint);
+
+out:
+ dev->act_len = done;
+ dev->status = 0;
+
+ return done;
+}
+
+int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
+ int len, int interval)
+{
+ printf("dev = %p pipe = %#lx buf = %p size = %d int = %d\n",
+ dev, pipe, buffer, len, interval);
+ return -ENOSYS;
+}
+
+/* U-Boot USB control interface */
+int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
+{
+ uint32_t snpsid;
+ int i, j;
+
+ root_hub_devnum = 0;
+
+ snpsid = readl(&regs->gsnpsid);
+ printf("Core Release: %x.%03x\n", snpsid >> 12 & 0xf, snpsid & 0xfff);
+
+ if ((snpsid & DWC2_SNPSID_DEVID_MASK) != DWC2_SNPSID_DEVID_VER_2xx) {
+ printf("SNPSID invalid (not DWC2 OTG device): %08x\n", snpsid);
+ return -ENODEV;
+ }
+
+ dwc_otg_core_init(regs);
+ dwc_otg_core_host_init(regs);
+
+ clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
+ DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG |
+ DWC2_HPRT0_PRTOVRCURRCHNG,
+ DWC2_HPRT0_PRTRST);
+ mdelay(50);
+ clrbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA | DWC2_HPRT0_PRTCONNDET |
+ DWC2_HPRT0_PRTENCHNG | DWC2_HPRT0_PRTOVRCURRCHNG |
+ DWC2_HPRT0_PRTRST);
+
+ for (i = 0; i < MAX_DEVICE; i++) {
+ for (j = 0; j < MAX_ENDPOINT; j++) {
+ control_data_toggle[i][j] = DWC2_HC_PID_DATA1;
+ bulk_data_toggle[i][j] = DWC2_HC_PID_DATA0;
+ }
+ }
+
+ return 0;
+}
+
+int usb_lowlevel_stop(int index)
+{
+ /* Put everything in reset. */
+ clrsetbits_le32(&regs->hprt0, DWC2_HPRT0_PRTENA |
+ DWC2_HPRT0_PRTCONNDET | DWC2_HPRT0_PRTENCHNG |
+ DWC2_HPRT0_PRTOVRCURRCHNG,
+ DWC2_HPRT0_PRTRST);
+ return 0;
+}
diff --git a/drivers/usb/host/dwc2.h b/drivers/usb/host/dwc2.h
new file mode 100644
index 0000000..ba08fd5
--- /dev/null
+++ b/drivers/usb/host/dwc2.h
@@ -0,0 +1,782 @@
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __DWC2_H__
+#define __DWC2_H__
+
+struct dwc2_hc_regs {
+ u32 hcchar; /* 0x00 */
+ u32 hcsplt;
+ u32 hcint;
+ u32 hcintmsk;
+ u32 hctsiz; /* 0x10 */
+ u32 hcdma;
+ u32 reserved;
+ u32 hcdmab;
+};
+
+struct dwc2_host_regs {
+ u32 hcfg; /* 0x00 */
+ u32 hfir;
+ u32 hfnum;
+ u32 _pad_0x40c;
+ u32 hptxsts; /* 0x10 */
+ u32 haint;
+ u32 haintmsk;
+ u32 hflbaddr;
+};
+
+struct dwc2_core_regs {
+ u32 gotgctl; /* 0x000 */
+ u32 gotgint;
+ u32 gahbcfg;
+ u32 gusbcfg;
+ u32 grstctl; /* 0x010 */
+ u32 gintsts;
+ u32 gintmsk;
+ u32 grxstsr;
+ u32 grxstsp; /* 0x020 */
+ u32 grxfsiz;
+ u32 gnptxfsiz;
+ u32 gnptxsts;
+ u32 gi2cctl; /* 0x030 */
+ u32 gpvndctl;
+ u32 ggpio;
+ u32 guid;
+ u32 gsnpsid; /* 0x040 */
+ u32 ghwcfg1;
+ u32 ghwcfg2;
+ u32 ghwcfg3;
+ u32 ghwcfg4; /* 0x050 */
+ u32 glpmcfg;
+ u32 _pad_0x58_0x9c[42];
+ u32 hptxfsiz; /* 0x100 */
+ u32 dptxfsiz_dieptxf[15];
+ u32 _pad_0x140_0x3fc[176];
+ struct dwc2_host_regs host_regs; /* 0x400 */
+ u32 _pad_0x420_0x43c[8];
+ u32 hprt0; /* 0x440 */
+ u32 _pad_0x444_0x4fc[47];
+ struct dwc2_hc_regs hc_regs[16]; /* 0x500 */
+ u32 _pad_0x700_0xe00[448];
+ u32 pcgcctl; /* 0xe00 */
+};
+
+#define DWC2_GOTGCTL_SESREQSCS (1 << 0)
+#define DWC2_GOTGCTL_SESREQSCS_OFFSET 0
+#define DWC2_GOTGCTL_SESREQ (1 << 1)
+#define DWC2_GOTGCTL_SESREQ_OFFSET 1
+#define DWC2_GOTGCTL_HSTNEGSCS (1 << 8)
+#define DWC2_GOTGCTL_HSTNEGSCS_OFFSET 8
+#define DWC2_GOTGCTL_HNPREQ (1 << 9)
+#define DWC2_GOTGCTL_HNPREQ_OFFSET 9
+#define DWC2_GOTGCTL_HSTSETHNPEN (1 << 10)
+#define DWC2_GOTGCTL_HSTSETHNPEN_OFFSET 10
+#define DWC2_GOTGCTL_DEVHNPEN (1 << 11)
+#define DWC2_GOTGCTL_DEVHNPEN_OFFSET 11
+#define DWC2_GOTGCTL_CONIDSTS (1 << 16)
+#define DWC2_GOTGCTL_CONIDSTS_OFFSET 16
+#define DWC2_GOTGCTL_DBNCTIME (1 << 17)
+#define DWC2_GOTGCTL_DBNCTIME_OFFSET 17
+#define DWC2_GOTGCTL_ASESVLD (1 << 18)
+#define DWC2_GOTGCTL_ASESVLD_OFFSET 18
+#define DWC2_GOTGCTL_BSESVLD (1 << 19)
+#define DWC2_GOTGCTL_BSESVLD_OFFSET 19
+#define DWC2_GOTGCTL_OTGVER (1 << 20)
+#define DWC2_GOTGCTL_OTGVER_OFFSET 20
+#define DWC2_GOTGINT_SESENDDET (1 << 2)
+#define DWC2_GOTGINT_SESENDDET_OFFSET 2
+#define DWC2_GOTGINT_SESREQSUCSTSCHNG (1 << 8)
+#define DWC2_GOTGINT_SESREQSUCSTSCHNG_OFFSET 8
+#define DWC2_GOTGINT_HSTNEGSUCSTSCHNG (1 << 9)
+#define DWC2_GOTGINT_HSTNEGSUCSTSCHNG_OFFSET 9
+#define DWC2_GOTGINT_RESERVER10_16_MASK (0x7F << 10)
+#define DWC2_GOTGINT_RESERVER10_16_OFFSET 10
+#define DWC2_GOTGINT_HSTNEGDET (1 << 17)
+#define DWC2_GOTGINT_HSTNEGDET_OFFSET 17
+#define DWC2_GOTGINT_ADEVTOUTCHNG (1 << 18)
+#define DWC2_GOTGINT_ADEVTOUTCHNG_OFFSET 18
+#define DWC2_GOTGINT_DEBDONE (1 << 19)
+#define DWC2_GOTGINT_DEBDONE_OFFSET 19
+#define DWC2_GAHBCFG_GLBLINTRMSK (1 << 0)
+#define DWC2_GAHBCFG_GLBLINTRMSK_OFFSET 0
+#define DWC2_GAHBCFG_HBURSTLEN_SINGLE (0 << 1)
+#define DWC2_GAHBCFG_HBURSTLEN_INCR (1 << 1)
+#define DWC2_GAHBCFG_HBURSTLEN_INCR4 (3 << 1)
+#define DWC2_GAHBCFG_HBURSTLEN_INCR8 (5 << 1)
+#define DWC2_GAHBCFG_HBURSTLEN_INCR16 (7 << 1)
+#define DWC2_GAHBCFG_HBURSTLEN_MASK (0xF << 1)
+#define DWC2_GAHBCFG_HBURSTLEN_OFFSET 1
+#define DWC2_GAHBCFG_DMAENABLE (1 << 5)
+#define DWC2_GAHBCFG_DMAENABLE_OFFSET 5
+#define DWC2_GAHBCFG_NPTXFEMPLVL_TXFEMPLVL (1 << 7)
+#define DWC2_GAHBCFG_NPTXFEMPLVL_TXFEMPLVL_OFFSET 7
+#define DWC2_GAHBCFG_PTXFEMPLVL (1 << 8)
+#define DWC2_GAHBCFG_PTXFEMPLVL_OFFSET 8
+#define DWC2_GUSBCFG_TOUTCAL_MASK (0x7 << 0)
+#define DWC2_GUSBCFG_TOUTCAL_OFFSET 0
+#define DWC2_GUSBCFG_PHYIF (1 << 3)
+#define DWC2_GUSBCFG_PHYIF_OFFSET 3
+#define DWC2_GUSBCFG_ULPI_UTMI_SEL (1 << 4)
+#define DWC2_GUSBCFG_ULPI_UTMI_SEL_OFFSET 4
+#define DWC2_GUSBCFG_FSINTF (1 << 5)
+#define DWC2_GUSBCFG_FSINTF_OFFSET 5
+#define DWC2_GUSBCFG_PHYSEL (1 << 6)
+#define DWC2_GUSBCFG_PHYSEL_OFFSET 6
+#define DWC2_GUSBCFG_DDRSEL (1 << 7)
+#define DWC2_GUSBCFG_DDRSEL_OFFSET 7
+#define DWC2_GUSBCFG_SRPCAP (1 << 8)
+#define DWC2_GUSBCFG_SRPCAP_OFFSET 8
+#define DWC2_GUSBCFG_HNPCAP (1 << 9)
+#define DWC2_GUSBCFG_HNPCAP_OFFSET 9
+#define DWC2_GUSBCFG_USBTRDTIM_MASK (0xF << 10)
+#define DWC2_GUSBCFG_USBTRDTIM_OFFSET 10
+#define DWC2_GUSBCFG_NPTXFRWNDEN (1 << 14)
+#define DWC2_GUSBCFG_NPTXFRWNDEN_OFFSET 14
+#define DWC2_GUSBCFG_PHYLPWRCLKSEL (1 << 15)
+#define DWC2_GUSBCFG_PHYLPWRCLKSEL_OFFSET 15
+#define DWC2_GUSBCFG_OTGUTMIFSSEL (1 << 16)
+#define DWC2_GUSBCFG_OTGUTMIFSSEL_OFFSET 16
+#define DWC2_GUSBCFG_ULPI_FSLS (1 << 17)
+#define DWC2_GUSBCFG_ULPI_FSLS_OFFSET 17
+#define DWC2_GUSBCFG_ULPI_AUTO_RES (1 << 18)
+#define DWC2_GUSBCFG_ULPI_AUTO_RES_OFFSET 18
+#define DWC2_GUSBCFG_ULPI_CLK_SUS_M (1 << 19)
+#define DWC2_GUSBCFG_ULPI_CLK_SUS_M_OFFSET 19
+#define DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV (1 << 20)
+#define DWC2_GUSBCFG_ULPI_EXT_VBUS_DRV_OFFSET 20
+#define DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR (1 << 21)
+#define DWC2_GUSBCFG_ULPI_INT_VBUS_INDICATOR_OFFSET 21
+#define DWC2_GUSBCFG_TERM_SEL_DL_PULSE (1 << 22)
+#define DWC2_GUSBCFG_TERM_SEL_DL_PULSE_OFFSET 22
+#define DWC2_GUSBCFG_IC_USB_CAP (1 << 26)
+#define DWC2_GUSBCFG_IC_USB_CAP_OFFSET 26
+#define DWC2_GUSBCFG_IC_TRAFFIC_PULL_REMOVE (1 << 27)
+#define DWC2_GUSBCFG_IC_TRAFFIC_PULL_REMOVE_OFFSET 27
+#define DWC2_GUSBCFG_TX_END_DELAY (1 << 28)
+#define DWC2_GUSBCFG_TX_END_DELAY_OFFSET 28
+#define DWC2_GUSBCFG_FORCEHOSTMODE (1 << 29)
+#define DWC2_GUSBCFG_FORCEHOSTMODE_OFFSET 29
+#define DWC2_GUSBCFG_FORCEDEVMODE (1 << 30)
+#define DWC2_GUSBCFG_FORCEDEVMODE_OFFSET 30
+#define DWC2_GLPMCTL_LPM_CAP_EN (1 << 0)
+#define DWC2_GLPMCTL_LPM_CAP_EN_OFFSET 0
+#define DWC2_GLPMCTL_APPL_RESP (1 << 1)
+#define DWC2_GLPMCTL_APPL_RESP_OFFSET 1
+#define DWC2_GLPMCTL_HIRD_MASK (0xF << 2)
+#define DWC2_GLPMCTL_HIRD_OFFSET 2
+#define DWC2_GLPMCTL_REM_WKUP_EN (1 << 6)
+#define DWC2_GLPMCTL_REM_WKUP_EN_OFFSET 6
+#define DWC2_GLPMCTL_EN_UTMI_SLEEP (1 << 7)
+#define DWC2_GLPMCTL_EN_UTMI_SLEEP_OFFSET 7
+#define DWC2_GLPMCTL_HIRD_THRES_MASK (0x1F << 8)
+#define DWC2_GLPMCTL_HIRD_THRES_OFFSET 8
+#define DWC2_GLPMCTL_LPM_RESP_MASK (0x3 << 13)
+#define DWC2_GLPMCTL_LPM_RESP_OFFSET 13
+#define DWC2_GLPMCTL_PRT_SLEEP_STS (1 << 15)
+#define DWC2_GLPMCTL_PRT_SLEEP_STS_OFFSET 15
+#define DWC2_GLPMCTL_SLEEP_STATE_RESUMEOK (1 << 16)
+#define DWC2_GLPMCTL_SLEEP_STATE_RESUMEOK_OFFSET 16
+#define DWC2_GLPMCTL_LPM_CHAN_INDEX_MASK (0xF << 17)
+#define DWC2_GLPMCTL_LPM_CHAN_INDEX_OFFSET 17
+#define DWC2_GLPMCTL_RETRY_COUNT_MASK (0x7 << 21)
+#define DWC2_GLPMCTL_RETRY_COUNT_OFFSET 21
+#define DWC2_GLPMCTL_SEND_LPM (1 << 24)
+#define DWC2_GLPMCTL_SEND_LPM_OFFSET 24
+#define DWC2_GLPMCTL_RETRY_COUNT_STS_MASK (0x7 << 25)
+#define DWC2_GLPMCTL_RETRY_COUNT_STS_OFFSET 25
+#define DWC2_GLPMCTL_HSIC_CONNECT (1 << 30)
+#define DWC2_GLPMCTL_HSIC_CONNECT_OFFSET 30
+#define DWC2_GLPMCTL_INV_SEL_HSIC (1 << 31)
+#define DWC2_GLPMCTL_INV_SEL_HSIC_OFFSET 31
+#define DWC2_GRSTCTL_CSFTRST (1 << 0)
+#define DWC2_GRSTCTL_CSFTRST_OFFSET 0
+#define DWC2_GRSTCTL_HSFTRST (1 << 1)
+#define DWC2_GRSTCTL_HSFTRST_OFFSET 1
+#define DWC2_GRSTCTL_HSTFRM (1 << 2)
+#define DWC2_GRSTCTL_HSTFRM_OFFSET 2
+#define DWC2_GRSTCTL_INTKNQFLSH (1 << 3)
+#define DWC2_GRSTCTL_INTKNQFLSH_OFFSET 3
+#define DWC2_GRSTCTL_RXFFLSH (1 << 4)
+#define DWC2_GRSTCTL_RXFFLSH_OFFSET 4
+#define DWC2_GRSTCTL_TXFFLSH (1 << 5)
+#define DWC2_GRSTCTL_TXFFLSH_OFFSET 5
+#define DWC2_GRSTCTL_TXFNUM_MASK (0x1F << 6)
+#define DWC2_GRSTCTL_TXFNUM_OFFSET 6
+#define DWC2_GRSTCTL_DMAREQ (1 << 30)
+#define DWC2_GRSTCTL_DMAREQ_OFFSET 30
+#define DWC2_GRSTCTL_AHBIDLE (1 << 31)
+#define DWC2_GRSTCTL_AHBIDLE_OFFSET 31
+#define DWC2_GINTMSK_MODEMISMATCH (1 << 1)
+#define DWC2_GINTMSK_MODEMISMATCH_OFFSET 1
+#define DWC2_GINTMSK_OTGINTR (1 << 2)
+#define DWC2_GINTMSK_OTGINTR_OFFSET 2
+#define DWC2_GINTMSK_SOFINTR (1 << 3)
+#define DWC2_GINTMSK_SOFINTR_OFFSET 3
+#define DWC2_GINTMSK_RXSTSQLVL (1 << 4)
+#define DWC2_GINTMSK_RXSTSQLVL_OFFSET 4
+#define DWC2_GINTMSK_NPTXFEMPTY (1 << 5)
+#define DWC2_GINTMSK_NPTXFEMPTY_OFFSET 5
+#define DWC2_GINTMSK_GINNAKEFF (1 << 6)
+#define DWC2_GINTMSK_GINNAKEFF_OFFSET 6
+#define DWC2_GINTMSK_GOUTNAKEFF (1 << 7)
+#define DWC2_GINTMSK_GOUTNAKEFF_OFFSET 7
+#define DWC2_GINTMSK_I2CINTR (1 << 9)
+#define DWC2_GINTMSK_I2CINTR_OFFSET 9
+#define DWC2_GINTMSK_ERLYSUSPEND (1 << 10)
+#define DWC2_GINTMSK_ERLYSUSPEND_OFFSET 10
+#define DWC2_GINTMSK_USBSUSPEND (1 << 11)
+#define DWC2_GINTMSK_USBSUSPEND_OFFSET 11
+#define DWC2_GINTMSK_USBRESET (1 << 12)
+#define DWC2_GINTMSK_USBRESET_OFFSET 12
+#define DWC2_GINTMSK_ENUMDONE (1 << 13)
+#define DWC2_GINTMSK_ENUMDONE_OFFSET 13
+#define DWC2_GINTMSK_ISOOUTDROP (1 << 14)
+#define DWC2_GINTMSK_ISOOUTDROP_OFFSET 14
+#define DWC2_GINTMSK_EOPFRAME (1 << 15)
+#define DWC2_GINTMSK_EOPFRAME_OFFSET 15
+#define DWC2_GINTMSK_EPMISMATCH (1 << 17)
+#define DWC2_GINTMSK_EPMISMATCH_OFFSET 17
+#define DWC2_GINTMSK_INEPINTR (1 << 18)
+#define DWC2_GINTMSK_INEPINTR_OFFSET 18
+#define DWC2_GINTMSK_OUTEPINTR (1 << 19)
+#define DWC2_GINTMSK_OUTEPINTR_OFFSET 19
+#define DWC2_GINTMSK_INCOMPLISOIN (1 << 20)
+#define DWC2_GINTMSK_INCOMPLISOIN_OFFSET 20
+#define DWC2_GINTMSK_INCOMPLISOOUT (1 << 21)
+#define DWC2_GINTMSK_INCOMPLISOOUT_OFFSET 21
+#define DWC2_GINTMSK_PORTINTR (1 << 24)
+#define DWC2_GINTMSK_PORTINTR_OFFSET 24
+#define DWC2_GINTMSK_HCINTR (1 << 25)
+#define DWC2_GINTMSK_HCINTR_OFFSET 25
+#define DWC2_GINTMSK_PTXFEMPTY (1 << 26)
+#define DWC2_GINTMSK_PTXFEMPTY_OFFSET 26
+#define DWC2_GINTMSK_LPMTRANRCVD (1 << 27)
+#define DWC2_GINTMSK_LPMTRANRCVD_OFFSET 27
+#define DWC2_GINTMSK_CONIDSTSCHNG (1 << 28)
+#define DWC2_GINTMSK_CONIDSTSCHNG_OFFSET 28
+#define DWC2_GINTMSK_DISCONNECT (1 << 29)
+#define DWC2_GINTMSK_DISCONNECT_OFFSET 29
+#define DWC2_GINTMSK_SESSREQINTR (1 << 30)
+#define DWC2_GINTMSK_SESSREQINTR_OFFSET 30
+#define DWC2_GINTMSK_WKUPINTR (1 << 31)
+#define DWC2_GINTMSK_WKUPINTR_OFFSET 31
+#define DWC2_GINTSTS_CURMODE_DEVICE (0 << 0)
+#define DWC2_GINTSTS_CURMODE_HOST (1 << 0)
+#define DWC2_GINTSTS_CURMODE (1 << 0)
+#define DWC2_GINTSTS_CURMODE_OFFSET 0
+#define DWC2_GINTSTS_MODEMISMATCH (1 << 1)
+#define DWC2_GINTSTS_MODEMISMATCH_OFFSET 1
+#define DWC2_GINTSTS_OTGINTR (1 << 2)
+#define DWC2_GINTSTS_OTGINTR_OFFSET 2
+#define DWC2_GINTSTS_SOFINTR (1 << 3)
+#define DWC2_GINTSTS_SOFINTR_OFFSET 3
+#define DWC2_GINTSTS_RXSTSQLVL (1 << 4)
+#define DWC2_GINTSTS_RXSTSQLVL_OFFSET 4
+#define DWC2_GINTSTS_NPTXFEMPTY (1 << 5)
+#define DWC2_GINTSTS_NPTXFEMPTY_OFFSET 5
+#define DWC2_GINTSTS_GINNAKEFF (1 << 6)
+#define DWC2_GINTSTS_GINNAKEFF_OFFSET 6
+#define DWC2_GINTSTS_GOUTNAKEFF (1 << 7)
+#define DWC2_GINTSTS_GOUTNAKEFF_OFFSET 7
+#define DWC2_GINTSTS_I2CINTR (1 << 9)
+#define DWC2_GINTSTS_I2CINTR_OFFSET 9
+#define DWC2_GINTSTS_ERLYSUSPEND (1 << 10)
+#define DWC2_GINTSTS_ERLYSUSPEND_OFFSET 10
+#define DWC2_GINTSTS_USBSUSPEND (1 << 11)
+#define DWC2_GINTSTS_USBSUSPEND_OFFSET 11
+#define DWC2_GINTSTS_USBRESET (1 << 12)
+#define DWC2_GINTSTS_USBRESET_OFFSET 12
+#define DWC2_GINTSTS_ENUMDONE (1 << 13)
+#define DWC2_GINTSTS_ENUMDONE_OFFSET 13
+#define DWC2_GINTSTS_ISOOUTDROP (1 << 14)
+#define DWC2_GINTSTS_ISOOUTDROP_OFFSET 14
+#define DWC2_GINTSTS_EOPFRAME (1 << 15)
+#define DWC2_GINTSTS_EOPFRAME_OFFSET 15
+#define DWC2_GINTSTS_INTOKENRX (1 << 16)
+#define DWC2_GINTSTS_INTOKENRX_OFFSET 16
+#define DWC2_GINTSTS_EPMISMATCH (1 << 17)
+#define DWC2_GINTSTS_EPMISMATCH_OFFSET 17
+#define DWC2_GINTSTS_INEPINT (1 << 18)
+#define DWC2_GINTSTS_INEPINT_OFFSET 18
+#define DWC2_GINTSTS_OUTEPINTR (1 << 19)
+#define DWC2_GINTSTS_OUTEPINTR_OFFSET 19
+#define DWC2_GINTSTS_INCOMPLISOIN (1 << 20)
+#define DWC2_GINTSTS_INCOMPLISOIN_OFFSET 20
+#define DWC2_GINTSTS_INCOMPLISOOUT (1 << 21)
+#define DWC2_GINTSTS_INCOMPLISOOUT_OFFSET 21
+#define DWC2_GINTSTS_PORTINTR (1 << 24)
+#define DWC2_GINTSTS_PORTINTR_OFFSET 24
+#define DWC2_GINTSTS_HCINTR (1 << 25)
+#define DWC2_GINTSTS_HCINTR_OFFSET 25
+#define DWC2_GINTSTS_PTXFEMPTY (1 << 26)
+#define DWC2_GINTSTS_PTXFEMPTY_OFFSET 26
+#define DWC2_GINTSTS_LPMTRANRCVD (1 << 27)
+#define DWC2_GINTSTS_LPMTRANRCVD_OFFSET 27
+#define DWC2_GINTSTS_CONIDSTSCHNG (1 << 28)
+#define DWC2_GINTSTS_CONIDSTSCHNG_OFFSET 28
+#define DWC2_GINTSTS_DISCONNECT (1 << 29)
+#define DWC2_GINTSTS_DISCONNECT_OFFSET 29
+#define DWC2_GINTSTS_SESSREQINTR (1 << 30)
+#define DWC2_GINTSTS_SESSREQINTR_OFFSET 30
+#define DWC2_GINTSTS_WKUPINTR (1 << 31)
+#define DWC2_GINTSTS_WKUPINTR_OFFSET 31
+#define DWC2_GRXSTS_EPNUM_MASK (0xF << 0)
+#define DWC2_GRXSTS_EPNUM_OFFSET 0
+#define DWC2_GRXSTS_BCNT_MASK (0x7FF << 4)
+#define DWC2_GRXSTS_BCNT_OFFSET 4
+#define DWC2_GRXSTS_DPID_MASK (0x3 << 15)
+#define DWC2_GRXSTS_DPID_OFFSET 15
+#define DWC2_GRXSTS_PKTSTS_MASK (0xF << 17)
+#define DWC2_GRXSTS_PKTSTS_OFFSET 17
+#define DWC2_GRXSTS_FN_MASK (0xF << 21)
+#define DWC2_GRXSTS_FN_OFFSET 21
+#define DWC2_FIFOSIZE_STARTADDR_MASK (0xFFFF << 0)
+#define DWC2_FIFOSIZE_STARTADDR_OFFSET 0
+#define DWC2_FIFOSIZE_DEPTH_MASK (0xFFFF << 16)
+#define DWC2_FIFOSIZE_DEPTH_OFFSET 16
+#define DWC2_GNPTXSTS_NPTXFSPCAVAIL_MASK (0xFFFF << 0)
+#define DWC2_GNPTXSTS_NPTXFSPCAVAIL_OFFSET 0
+#define DWC2_GNPTXSTS_NPTXQSPCAVAIL_MASK (0xFF << 16)
+#define DWC2_GNPTXSTS_NPTXQSPCAVAIL_OFFSET 16
+#define DWC2_GNPTXSTS_NPTXQTOP_TERMINATE (1 << 24)
+#define DWC2_GNPTXSTS_NPTXQTOP_TERMINATE_OFFSET 24
+#define DWC2_GNPTXSTS_NPTXQTOP_TOKEN_MASK (0x3 << 25)
+#define DWC2_GNPTXSTS_NPTXQTOP_TOKEN_OFFSET 25
+#define DWC2_GNPTXSTS_NPTXQTOP_CHNEP_MASK (0xF << 27)
+#define DWC2_GNPTXSTS_NPTXQTOP_CHNEP_OFFSET 27
+#define DWC2_DTXFSTS_TXFSPCAVAIL_MASK (0xFFFF << 0)
+#define DWC2_DTXFSTS_TXFSPCAVAIL_OFFSET 0
+#define DWC2_GI2CCTL_RWDATA_MASK (0xFF << 0)
+#define DWC2_GI2CCTL_RWDATA_OFFSET 0
+#define DWC2_GI2CCTL_REGADDR_MASK (0xFF << 8)
+#define DWC2_GI2CCTL_REGADDR_OFFSET 8
+#define DWC2_GI2CCTL_ADDR_MASK (0x7F << 16)
+#define DWC2_GI2CCTL_ADDR_OFFSET 16
+#define DWC2_GI2CCTL_I2CEN (1 << 23)
+#define DWC2_GI2CCTL_I2CEN_OFFSET 23
+#define DWC2_GI2CCTL_ACK (1 << 24)
+#define DWC2_GI2CCTL_ACK_OFFSET 24
+#define DWC2_GI2CCTL_I2CSUSPCTL (1 << 25)
+#define DWC2_GI2CCTL_I2CSUSPCTL_OFFSET 25
+#define DWC2_GI2CCTL_I2CDEVADDR_MASK (0x3 << 26)
+#define DWC2_GI2CCTL_I2CDEVADDR_OFFSET 26
+#define DWC2_GI2CCTL_RW (1 << 30)
+#define DWC2_GI2CCTL_RW_OFFSET 30
+#define DWC2_GI2CCTL_BSYDNE (1 << 31)
+#define DWC2_GI2CCTL_BSYDNE_OFFSET 31
+#define DWC2_HWCFG1_EP_DIR0_MASK (0x3 << 0)
+#define DWC2_HWCFG1_EP_DIR0_OFFSET 0
+#define DWC2_HWCFG1_EP_DIR1_MASK (0x3 << 2)
+#define DWC2_HWCFG1_EP_DIR1_OFFSET 2
+#define DWC2_HWCFG1_EP_DIR2_MASK (0x3 << 4)
+#define DWC2_HWCFG1_EP_DIR2_OFFSET 4
+#define DWC2_HWCFG1_EP_DIR3_MASK (0x3 << 6)
+#define DWC2_HWCFG1_EP_DIR3_OFFSET 6
+#define DWC2_HWCFG1_EP_DIR4_MASK (0x3 << 8)
+#define DWC2_HWCFG1_EP_DIR4_OFFSET 8
+#define DWC2_HWCFG1_EP_DIR5_MASK (0x3 << 10)
+#define DWC2_HWCFG1_EP_DIR5_OFFSET 10
+#define DWC2_HWCFG1_EP_DIR6_MASK (0x3 << 12)
+#define DWC2_HWCFG1_EP_DIR6_OFFSET 12
+#define DWC2_HWCFG1_EP_DIR7_MASK (0x3 << 14)
+#define DWC2_HWCFG1_EP_DIR7_OFFSET 14
+#define DWC2_HWCFG1_EP_DIR8_MASK (0x3 << 16)
+#define DWC2_HWCFG1_EP_DIR8_OFFSET 16
+#define DWC2_HWCFG1_EP_DIR9_MASK (0x3 << 18)
+#define DWC2_HWCFG1_EP_DIR9_OFFSET 18
+#define DWC2_HWCFG1_EP_DIR10_MASK (0x3 << 20)
+#define DWC2_HWCFG1_EP_DIR10_OFFSET 20
+#define DWC2_HWCFG1_EP_DIR11_MASK (0x3 << 22)
+#define DWC2_HWCFG1_EP_DIR11_OFFSET 22
+#define DWC2_HWCFG1_EP_DIR12_MASK (0x3 << 24)
+#define DWC2_HWCFG1_EP_DIR12_OFFSET 24
+#define DWC2_HWCFG1_EP_DIR13_MASK (0x3 << 26)
+#define DWC2_HWCFG1_EP_DIR13_OFFSET 26
+#define DWC2_HWCFG1_EP_DIR14_MASK (0x3 << 28)
+#define DWC2_HWCFG1_EP_DIR14_OFFSET 28
+#define DWC2_HWCFG1_EP_DIR15_MASK (0x3 << 30)
+#define DWC2_HWCFG1_EP_DIR15_OFFSET 30
+#define DWC2_HWCFG2_OP_MODE_MASK (0x7 << 0)
+#define DWC2_HWCFG2_OP_MODE_OFFSET 0
+#define DWC2_HWCFG2_ARCHITECTURE_SLAVE_ONLY (0x0 << 3)
+#define DWC2_HWCFG2_ARCHITECTURE_EXT_DMA (0x1 << 3)
+#define DWC2_HWCFG2_ARCHITECTURE_INT_DMA (0x2 << 3)
+#define DWC2_HWCFG2_ARCHITECTURE_MASK (0x3 << 3)
+#define DWC2_HWCFG2_ARCHITECTURE_OFFSET 3
+#define DWC2_HWCFG2_POINT2POINT (1 << 5)
+#define DWC2_HWCFG2_POINT2POINT_OFFSET 5
+#define DWC2_HWCFG2_HS_PHY_TYPE_MASK (0x3 << 6)
+#define DWC2_HWCFG2_HS_PHY_TYPE_OFFSET 6
+#define DWC2_HWCFG2_FS_PHY_TYPE_MASK (0x3 << 8)
+#define DWC2_HWCFG2_FS_PHY_TYPE_OFFSET 8
+#define DWC2_HWCFG2_NUM_DEV_EP_MASK (0xF << 10)
+#define DWC2_HWCFG2_NUM_DEV_EP_OFFSET 10
+#define DWC2_HWCFG2_NUM_HOST_CHAN_MASK (0xF << 14)
+#define DWC2_HWCFG2_NUM_HOST_CHAN_OFFSET 14
+#define DWC2_HWCFG2_PERIO_EP_SUPPORTED (1 << 18)
+#define DWC2_HWCFG2_PERIO_EP_SUPPORTED_OFFSET 18
+#define DWC2_HWCFG2_DYNAMIC_FIFO (1 << 19)
+#define DWC2_HWCFG2_DYNAMIC_FIFO_OFFSET 19
+#define DWC2_HWCFG2_MULTI_PROC_INT (1 << 20)
+#define DWC2_HWCFG2_MULTI_PROC_INT_OFFSET 20
+#define DWC2_HWCFG2_NONPERIO_TX_Q_DEPTH_MASK (0x3 << 22)
+#define DWC2_HWCFG2_NONPERIO_TX_Q_DEPTH_OFFSET 22
+#define DWC2_HWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK (0x3 << 24)
+#define DWC2_HWCFG2_HOST_PERIO_TX_Q_DEPTH_OFFSET 24
+#define DWC2_HWCFG2_DEV_TOKEN_Q_DEPTH_MASK (0x1F << 26)
+#define DWC2_HWCFG2_DEV_TOKEN_Q_DEPTH_OFFSET 26
+#define DWC2_HWCFG3_XFER_SIZE_CNTR_WIDTH_MASK (0xF << 0)
+#define DWC2_HWCFG3_XFER_SIZE_CNTR_WIDTH_OFFSET 0
+#define DWC2_HWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK (0x7 << 4)
+#define DWC2_HWCFG3_PACKET_SIZE_CNTR_WIDTH_OFFSET 4
+#define DWC2_HWCFG3_OTG_FUNC (1 << 7)
+#define DWC2_HWCFG3_OTG_FUNC_OFFSET 7
+#define DWC2_HWCFG3_I2C (1 << 8)
+#define DWC2_HWCFG3_I2C_OFFSET 8
+#define DWC2_HWCFG3_VENDOR_CTRL_IF (1 << 9)
+#define DWC2_HWCFG3_VENDOR_CTRL_IF_OFFSET 9
+#define DWC2_HWCFG3_OPTIONAL_FEATURES (1 << 10)
+#define DWC2_HWCFG3_OPTIONAL_FEATURES_OFFSET 10
+#define DWC2_HWCFG3_SYNCH_RESET_TYPE (1 << 11)
+#define DWC2_HWCFG3_SYNCH_RESET_TYPE_OFFSET 11
+#define DWC2_HWCFG3_OTG_ENABLE_IC_USB (1 << 12)
+#define DWC2_HWCFG3_OTG_ENABLE_IC_USB_OFFSET 12
+#define DWC2_HWCFG3_OTG_ENABLE_HSIC (1 << 13)
+#define DWC2_HWCFG3_OTG_ENABLE_HSIC_OFFSET 13
+#define DWC2_HWCFG3_OTG_LPM_EN (1 << 15)
+#define DWC2_HWCFG3_OTG_LPM_EN_OFFSET 15
+#define DWC2_HWCFG3_DFIFO_DEPTH_MASK (0xFFFF << 16)
+#define DWC2_HWCFG3_DFIFO_DEPTH_OFFSET 16
+#define DWC2_HWCFG4_NUM_DEV_PERIO_IN_EP_MASK (0xF << 0)
+#define DWC2_HWCFG4_NUM_DEV_PERIO_IN_EP_OFFSET 0
+#define DWC2_HWCFG4_POWER_OPTIMIZ (1 << 4)
+#define DWC2_HWCFG4_POWER_OPTIMIZ_OFFSET 4
+#define DWC2_HWCFG4_MIN_AHB_FREQ_MASK (0x1FF << 5)
+#define DWC2_HWCFG4_MIN_AHB_FREQ_OFFSET 5
+#define DWC2_HWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14)
+#define DWC2_HWCFG4_UTMI_PHY_DATA_WIDTH_OFFSET 14
+#define DWC2_HWCFG4_NUM_DEV_MODE_CTRL_EP_MASK (0xF << 16)
+#define DWC2_HWCFG4_NUM_DEV_MODE_CTRL_EP_OFFSET 16
+#define DWC2_HWCFG4_IDDIG_FILT_EN (1 << 20)
+#define DWC2_HWCFG4_IDDIG_FILT_EN_OFFSET 20
+#define DWC2_HWCFG4_VBUS_VALID_FILT_EN (1 << 21)
+#define DWC2_HWCFG4_VBUS_VALID_FILT_EN_OFFSET 21
+#define DWC2_HWCFG4_A_VALID_FILT_EN (1 << 22)
+#define DWC2_HWCFG4_A_VALID_FILT_EN_OFFSET 22
+#define DWC2_HWCFG4_B_VALID_FILT_EN (1 << 23)
+#define DWC2_HWCFG4_B_VALID_FILT_EN_OFFSET 23
+#define DWC2_HWCFG4_SESSION_END_FILT_EN (1 << 24)
+#define DWC2_HWCFG4_SESSION_END_FILT_EN_OFFSET 24
+#define DWC2_HWCFG4_DED_FIFO_EN (1 << 25)
+#define DWC2_HWCFG4_DED_FIFO_EN_OFFSET 25
+#define DWC2_HWCFG4_NUM_IN_EPS_MASK (0xF << 26)
+#define DWC2_HWCFG4_NUM_IN_EPS_OFFSET 26
+#define DWC2_HWCFG4_DESC_DMA (1 << 30)
+#define DWC2_HWCFG4_DESC_DMA_OFFSET 30
+#define DWC2_HWCFG4_DESC_DMA_DYN (1 << 31)
+#define DWC2_HWCFG4_DESC_DMA_DYN_OFFSET 31
+#define DWC2_HCFG_FSLSPCLKSEL_30_60_MHZ 0
+#define DWC2_HCFG_FSLSPCLKSEL_48_MHZ 1
+#define DWC2_HCFG_FSLSPCLKSEL_6_MHZ 2
+#define DWC2_HCFG_FSLSPCLKSEL_MASK (0x3 << 0)
+#define DWC2_HCFG_FSLSPCLKSEL_OFFSET 0
+#define DWC2_HCFG_FSLSSUPP (1 << 2)
+#define DWC2_HCFG_FSLSSUPP_OFFSET 2
+#define DWC2_HCFG_DESCDMA (1 << 23)
+#define DWC2_HCFG_DESCDMA_OFFSET 23
+#define DWC2_HCFG_FRLISTEN_MASK (0x3 << 24)
+#define DWC2_HCFG_FRLISTEN_OFFSET 24
+#define DWC2_HCFG_PERSCHEDENA (1 << 26)
+#define DWC2_HCFG_PERSCHEDENA_OFFSET 26
+#define DWC2_HCFG_PERSCHEDSTAT (1 << 27)
+#define DWC2_HCFG_PERSCHEDSTAT_OFFSET 27
+#define DWC2_HFIR_FRINT_MASK (0xFFFF << 0)
+#define DWC2_HFIR_FRINT_OFFSET 0
+#define DWC2_HFNUM_FRNUM_MASK (0xFFFF << 0)
+#define DWC2_HFNUM_FRNUM_OFFSET 0
+#define DWC2_HFNUM_FRREM_MASK (0xFFFF << 16)
+#define DWC2_HFNUM_FRREM_OFFSET 16
+#define DWC2_HPTXSTS_PTXFSPCAVAIL_MASK (0xFFFF << 0)
+#define DWC2_HPTXSTS_PTXFSPCAVAIL_OFFSET 0
+#define DWC2_HPTXSTS_PTXQSPCAVAIL_MASK (0xFF << 16)
+#define DWC2_HPTXSTS_PTXQSPCAVAIL_OFFSET 16
+#define DWC2_HPTXSTS_PTXQTOP_TERMINATE (1 << 24)
+#define DWC2_HPTXSTS_PTXQTOP_TERMINATE_OFFSET 24
+#define DWC2_HPTXSTS_PTXQTOP_TOKEN_MASK (0x3 << 25)
+#define DWC2_HPTXSTS_PTXQTOP_TOKEN_OFFSET 25
+#define DWC2_HPTXSTS_PTXQTOP_CHNUM_MASK (0xF << 27)
+#define DWC2_HPTXSTS_PTXQTOP_CHNUM_OFFSET 27
+#define DWC2_HPTXSTS_PTXQTOP_ODD (1 << 31)
+#define DWC2_HPTXSTS_PTXQTOP_ODD_OFFSET 31
+#define DWC2_HPRT0_PRTCONNSTS (1 << 0)
+#define DWC2_HPRT0_PRTCONNSTS_OFFSET 0
+#define DWC2_HPRT0_PRTCONNDET (1 << 1)
+#define DWC2_HPRT0_PRTCONNDET_OFFSET 1
+#define DWC2_HPRT0_PRTENA (1 << 2)
+#define DWC2_HPRT0_PRTENA_OFFSET 2
+#define DWC2_HPRT0_PRTENCHNG (1 << 3)
+#define DWC2_HPRT0_PRTENCHNG_OFFSET 3
+#define DWC2_HPRT0_PRTOVRCURRACT (1 << 4)
+#define DWC2_HPRT0_PRTOVRCURRACT_OFFSET 4
+#define DWC2_HPRT0_PRTOVRCURRCHNG (1 << 5)
+#define DWC2_HPRT0_PRTOVRCURRCHNG_OFFSET 5
+#define DWC2_HPRT0_PRTRES (1 << 6)
+#define DWC2_HPRT0_PRTRES_OFFSET 6
+#define DWC2_HPRT0_PRTSUSP (1 << 7)
+#define DWC2_HPRT0_PRTSUSP_OFFSET 7
+#define DWC2_HPRT0_PRTRST (1 << 8)
+#define DWC2_HPRT0_PRTRST_OFFSET 8
+#define DWC2_HPRT0_PRTLNSTS_MASK (0x3 << 10)
+#define DWC2_HPRT0_PRTLNSTS_OFFSET 10
+#define DWC2_HPRT0_PRTPWR (1 << 12)
+#define DWC2_HPRT0_PRTPWR_OFFSET 12
+#define DWC2_HPRT0_PRTTSTCTL_MASK (0xF << 13)
+#define DWC2_HPRT0_PRTTSTCTL_OFFSET 13
+#define DWC2_HPRT0_PRTSPD_MASK (0x3 << 17)
+#define DWC2_HPRT0_PRTSPD_OFFSET 17
+#define DWC2_HAINT_CH0 (1 << 0)
+#define DWC2_HAINT_CH0_OFFSET 0
+#define DWC2_HAINT_CH1 (1 << 1)
+#define DWC2_HAINT_CH1_OFFSET 1
+#define DWC2_HAINT_CH2 (1 << 2)
+#define DWC2_HAINT_CH2_OFFSET 2
+#define DWC2_HAINT_CH3 (1 << 3)
+#define DWC2_HAINT_CH3_OFFSET 3
+#define DWC2_HAINT_CH4 (1 << 4)
+#define DWC2_HAINT_CH4_OFFSET 4
+#define DWC2_HAINT_CH5 (1 << 5)
+#define DWC2_HAINT_CH5_OFFSET 5
+#define DWC2_HAINT_CH6 (1 << 6)
+#define DWC2_HAINT_CH6_OFFSET 6
+#define DWC2_HAINT_CH7 (1 << 7)
+#define DWC2_HAINT_CH7_OFFSET 7
+#define DWC2_HAINT_CH8 (1 << 8)
+#define DWC2_HAINT_CH8_OFFSET 8
+#define DWC2_HAINT_CH9 (1 << 9)
+#define DWC2_HAINT_CH9_OFFSET 9
+#define DWC2_HAINT_CH10 (1 << 10)
+#define DWC2_HAINT_CH10_OFFSET 10
+#define DWC2_HAINT_CH11 (1 << 11)
+#define DWC2_HAINT_CH11_OFFSET 11
+#define DWC2_HAINT_CH12 (1 << 12)
+#define DWC2_HAINT_CH12_OFFSET 12
+#define DWC2_HAINT_CH13 (1 << 13)
+#define DWC2_HAINT_CH13_OFFSET 13
+#define DWC2_HAINT_CH14 (1 << 14)
+#define DWC2_HAINT_CH14_OFFSET 14
+#define DWC2_HAINT_CH15 (1 << 15)
+#define DWC2_HAINT_CH15_OFFSET 15
+#define DWC2_HAINT_CHINT_MASK 0xffff
+#define DWC2_HAINT_CHINT_OFFSET 0
+#define DWC2_HAINTMSK_CH0 (1 << 0)
+#define DWC2_HAINTMSK_CH0_OFFSET 0
+#define DWC2_HAINTMSK_CH1 (1 << 1)
+#define DWC2_HAINTMSK_CH1_OFFSET 1
+#define DWC2_HAINTMSK_CH2 (1 << 2)
+#define DWC2_HAINTMSK_CH2_OFFSET 2
+#define DWC2_HAINTMSK_CH3 (1 << 3)
+#define DWC2_HAINTMSK_CH3_OFFSET 3
+#define DWC2_HAINTMSK_CH4 (1 << 4)
+#define DWC2_HAINTMSK_CH4_OFFSET 4
+#define DWC2_HAINTMSK_CH5 (1 << 5)
+#define DWC2_HAINTMSK_CH5_OFFSET 5
+#define DWC2_HAINTMSK_CH6 (1 << 6)
+#define DWC2_HAINTMSK_CH6_OFFSET 6
+#define DWC2_HAINTMSK_CH7 (1 << 7)
+#define DWC2_HAINTMSK_CH7_OFFSET 7
+#define DWC2_HAINTMSK_CH8 (1 << 8)
+#define DWC2_HAINTMSK_CH8_OFFSET 8
+#define DWC2_HAINTMSK_CH9 (1 << 9)
+#define DWC2_HAINTMSK_CH9_OFFSET 9
+#define DWC2_HAINTMSK_CH10 (1 << 10)
+#define DWC2_HAINTMSK_CH10_OFFSET 10
+#define DWC2_HAINTMSK_CH11 (1 << 11)
+#define DWC2_HAINTMSK_CH11_OFFSET 11
+#define DWC2_HAINTMSK_CH12 (1 << 12)
+#define DWC2_HAINTMSK_CH12_OFFSET 12
+#define DWC2_HAINTMSK_CH13 (1 << 13)
+#define DWC2_HAINTMSK_CH13_OFFSET 13
+#define DWC2_HAINTMSK_CH14 (1 << 14)
+#define DWC2_HAINTMSK_CH14_OFFSET 14
+#define DWC2_HAINTMSK_CH15 (1 << 15)
+#define DWC2_HAINTMSK_CH15_OFFSET 15
+#define DWC2_HAINTMSK_CHINT_MASK 0xffff
+#define DWC2_HAINTMSK_CHINT_OFFSET 0
+#define DWC2_HCCHAR_MPS_MASK (0x7FF << 0)
+#define DWC2_HCCHAR_MPS_OFFSET 0
+#define DWC2_HCCHAR_EPNUM_MASK (0xF << 11)
+#define DWC2_HCCHAR_EPNUM_OFFSET 11
+#define DWC2_HCCHAR_EPDIR (1 << 15)
+#define DWC2_HCCHAR_EPDIR_OFFSET 15
+#define DWC2_HCCHAR_LSPDDEV (1 << 17)
+#define DWC2_HCCHAR_LSPDDEV_OFFSET 17
+#define DWC2_HCCHAR_EPTYPE_CONTROL 0
+#define DWC2_HCCHAR_EPTYPE_ISOC 1
+#define DWC2_HCCHAR_EPTYPE_BULK 2
+#define DWC2_HCCHAR_EPTYPE_INTR 3
+#define DWC2_HCCHAR_EPTYPE_MASK (0x3 << 18)
+#define DWC2_HCCHAR_EPTYPE_OFFSET 18
+#define DWC2_HCCHAR_MULTICNT_MASK (0x3 << 20)
+#define DWC2_HCCHAR_MULTICNT_OFFSET 20
+#define DWC2_HCCHAR_DEVADDR_MASK (0x7F << 22)
+#define DWC2_HCCHAR_DEVADDR_OFFSET 22
+#define DWC2_HCCHAR_ODDFRM (1 << 29)
+#define DWC2_HCCHAR_ODDFRM_OFFSET 29
+#define DWC2_HCCHAR_CHDIS (1 << 30)
+#define DWC2_HCCHAR_CHDIS_OFFSET 30
+#define DWC2_HCCHAR_CHEN (1 << 31)
+#define DWC2_HCCHAR_CHEN_OFFSET 31
+#define DWC2_HCSPLT_PRTADDR_MASK (0x7F << 0)
+#define DWC2_HCSPLT_PRTADDR_OFFSET 0
+#define DWC2_HCSPLT_HUBADDR_MASK (0x7F << 7)
+#define DWC2_HCSPLT_HUBADDR_OFFSET 7
+#define DWC2_HCSPLT_XACTPOS_MASK (0x3 << 14)
+#define DWC2_HCSPLT_XACTPOS_OFFSET 14
+#define DWC2_HCSPLT_COMPSPLT (1 << 16)
+#define DWC2_HCSPLT_COMPSPLT_OFFSET 16
+#define DWC2_HCSPLT_SPLTENA (1 << 31)
+#define DWC2_HCSPLT_SPLTENA_OFFSET 31
+#define DWC2_HCINT_XFERCOMP (1 << 0)
+#define DWC2_HCINT_XFERCOMP_OFFSET 0
+#define DWC2_HCINT_CHHLTD (1 << 1)
+#define DWC2_HCINT_CHHLTD_OFFSET 1
+#define DWC2_HCINT_AHBERR (1 << 2)
+#define DWC2_HCINT_AHBERR_OFFSET 2
+#define DWC2_HCINT_STALL (1 << 3)
+#define DWC2_HCINT_STALL_OFFSET 3
+#define DWC2_HCINT_NAK (1 << 4)
+#define DWC2_HCINT_NAK_OFFSET 4
+#define DWC2_HCINT_ACK (1 << 5)
+#define DWC2_HCINT_ACK_OFFSET 5
+#define DWC2_HCINT_NYET (1 << 6)
+#define DWC2_HCINT_NYET_OFFSET 6
+#define DWC2_HCINT_XACTERR (1 << 7)
+#define DWC2_HCINT_XACTERR_OFFSET 7
+#define DWC2_HCINT_BBLERR (1 << 8)
+#define DWC2_HCINT_BBLERR_OFFSET 8
+#define DWC2_HCINT_FRMOVRUN (1 << 9)
+#define DWC2_HCINT_FRMOVRUN_OFFSET 9
+#define DWC2_HCINT_DATATGLERR (1 << 10)
+#define DWC2_HCINT_DATATGLERR_OFFSET 10
+#define DWC2_HCINT_BNA (1 << 11)
+#define DWC2_HCINT_BNA_OFFSET 11
+#define DWC2_HCINT_XCS_XACT (1 << 12)
+#define DWC2_HCINT_XCS_XACT_OFFSET 12
+#define DWC2_HCINT_FRM_LIST_ROLL (1 << 13)
+#define DWC2_HCINT_FRM_LIST_ROLL_OFFSET 13
+#define DWC2_HCINTMSK_XFERCOMPL (1 << 0)
+#define DWC2_HCINTMSK_XFERCOMPL_OFFSET 0
+#define DWC2_HCINTMSK_CHHLTD (1 << 1)
+#define DWC2_HCINTMSK_CHHLTD_OFFSET 1
+#define DWC2_HCINTMSK_AHBERR (1 << 2)
+#define DWC2_HCINTMSK_AHBERR_OFFSET 2
+#define DWC2_HCINTMSK_STALL (1 << 3)
+#define DWC2_HCINTMSK_STALL_OFFSET 3
+#define DWC2_HCINTMSK_NAK (1 << 4)
+#define DWC2_HCINTMSK_NAK_OFFSET 4
+#define DWC2_HCINTMSK_ACK (1 << 5)
+#define DWC2_HCINTMSK_ACK_OFFSET 5
+#define DWC2_HCINTMSK_NYET (1 << 6)
+#define DWC2_HCINTMSK_NYET_OFFSET 6
+#define DWC2_HCINTMSK_XACTERR (1 << 7)
+#define DWC2_HCINTMSK_XACTERR_OFFSET 7
+#define DWC2_HCINTMSK_BBLERR (1 << 8)
+#define DWC2_HCINTMSK_BBLERR_OFFSET 8
+#define DWC2_HCINTMSK_FRMOVRUN (1 << 9)
+#define DWC2_HCINTMSK_FRMOVRUN_OFFSET 9
+#define DWC2_HCINTMSK_DATATGLERR (1 << 10)
+#define DWC2_HCINTMSK_DATATGLERR_OFFSET 10
+#define DWC2_HCINTMSK_BNA (1 << 11)
+#define DWC2_HCINTMSK_BNA_OFFSET 11
+#define DWC2_HCINTMSK_XCS_XACT (1 << 12)
+#define DWC2_HCINTMSK_XCS_XACT_OFFSET 12
+#define DWC2_HCINTMSK_FRM_LIST_ROLL (1 << 13)
+#define DWC2_HCINTMSK_FRM_LIST_ROLL_OFFSET 13
+#define DWC2_HCTSIZ_XFERSIZE_MASK 0x7ffff
+#define DWC2_HCTSIZ_XFERSIZE_OFFSET 0
+#define DWC2_HCTSIZ_SCHINFO_MASK 0xff
+#define DWC2_HCTSIZ_SCHINFO_OFFSET 0
+#define DWC2_HCTSIZ_NTD_MASK (0xff << 8)
+#define DWC2_HCTSIZ_NTD_OFFSET 8
+#define DWC2_HCTSIZ_PKTCNT_MASK (0x3ff << 19)
+#define DWC2_HCTSIZ_PKTCNT_OFFSET 19
+#define DWC2_HCTSIZ_PID_MASK (0x3 << 29)
+#define DWC2_HCTSIZ_PID_OFFSET 29
+#define DWC2_HCTSIZ_DOPNG (1 << 31)
+#define DWC2_HCTSIZ_DOPNG_OFFSET 31
+#define DWC2_HCDMA_CTD_MASK (0xFF << 3)
+#define DWC2_HCDMA_CTD_OFFSET 3
+#define DWC2_HCDMA_DMA_ADDR_MASK (0x1FFFFF << 11)
+#define DWC2_HCDMA_DMA_ADDR_OFFSET 11
+#define DWC2_PCGCCTL_STOPPCLK (1 << 0)
+#define DWC2_PCGCCTL_STOPPCLK_OFFSET 0
+#define DWC2_PCGCCTL_GATEHCLK (1 << 1)
+#define DWC2_PCGCCTL_GATEHCLK_OFFSET 1
+#define DWC2_PCGCCTL_PWRCLMP (1 << 2)
+#define DWC2_PCGCCTL_PWRCLMP_OFFSET 2
+#define DWC2_PCGCCTL_RSTPDWNMODULE (1 << 3)
+#define DWC2_PCGCCTL_RSTPDWNMODULE_OFFSET 3
+#define DWC2_PCGCCTL_PHYSUSPENDED (1 << 4)
+#define DWC2_PCGCCTL_PHYSUSPENDED_OFFSET 4
+#define DWC2_PCGCCTL_ENBL_SLEEP_GATING (1 << 5)
+#define DWC2_PCGCCTL_ENBL_SLEEP_GATING_OFFSET 5
+#define DWC2_PCGCCTL_PHY_IN_SLEEP (1 << 6)
+#define DWC2_PCGCCTL_PHY_IN_SLEEP_OFFSET 6
+#define DWC2_PCGCCTL_DEEP_SLEEP (1 << 7)
+#define DWC2_PCGCCTL_DEEP_SLEEP_OFFSET 7
+#define DWC2_SNPSID_DEVID_VER_2xx (0x4f542 << 12)
+#define DWC2_SNPSID_DEVID_MASK (0xfffff << 12)
+#define DWC2_SNPSID_DEVID_OFFSET 12
+
+/* Host controller specific */
+#define DWC2_HC_PID_DATA0 0
+#define DWC2_HC_PID_DATA2 1
+#define DWC2_HC_PID_DATA1 2
+#define DWC2_HC_PID_MDATA 3
+#define DWC2_HC_PID_SETUP 3
+
+/* roothub.a masks */
+#define RH_A_NDP (0xff << 0) /* number of downstream ports */
+#define RH_A_PSM (1 << 8) /* power switching mode */
+#define RH_A_NPS (1 << 9) /* no power switching */
+#define RH_A_DT (1 << 10) /* device type (mbz) */
+#define RH_A_OCPM (1 << 11) /* over current protection mode */
+#define RH_A_NOCP (1 << 12) /* no over current protection */
+#define RH_A_POTPGT (0xff << 24) /* power on to power good time */
+
+/* roothub.b masks */
+#define RH_B_DR 0x0000ffff /* device removable flags */
+#define RH_B_PPCM 0xffff0000 /* port power control mask */
+
+/* Default driver configuration */
+#define CONFIG_DWC2_DMA_ENABLE
+#define CONFIG_DWC2_DMA_BURST_SIZE 32 /* DMA burst len */
+#undef CONFIG_DWC2_DFLT_SPEED_FULL /* Do not force DWC2 to FS */
+#define CONFIG_DWC2_ENABLE_DYNAMIC_FIFO /* Runtime FIFO size detect */
+#define CONFIG_DWC2_MAX_CHANNELS 16 /* Max # of EPs */
+#define CONFIG_DWC2_HOST_RX_FIFO_SIZE (516 + CONFIG_DWC2_MAX_CHANNELS)
+#define CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE 0x100 /* nPeriodic TX FIFO */
+#define CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE 0x200 /* Periodic TX FIFO */
+#define CONFIG_DWC2_MAX_TRANSFER_SIZE 65535
+#define CONFIG_DWC2_MAX_PACKET_COUNT 511
+
+#define DWC2_PHY_TYPE_FS 0
+#define DWC2_PHY_TYPE_UTMI 1
+#define DWC2_PHY_TYPE_ULPI 2
+#define CONFIG_DWC2_PHY_TYPE DWC2_PHY_TYPE_UTMI /* PHY type */
+#define CONFIG_DWC2_UTMI_WIDTH 8 /* UTMI bus width (8/16) */
+
+#undef CONFIG_DWC2_PHY_ULPI_DDR /* ULPI PHY uses DDR mode */
+#define CONFIG_DWC2_PHY_ULPI_EXT_VBUS /* ULPI PHY controls VBUS */
+#undef CONFIG_DWC2_I2C_ENABLE /* Enable I2C */
+#undef CONFIG_DWC2_ULPI_FS_LS /* ULPI is FS/LS */
+#undef CONFIG_DWC2_TS_DLINE /* External DLine pulsing */
+#undef CONFIG_DWC2_THR_CTL /* Threshold control */
+#define CONFIG_DWC2_TX_THR_LENGTH 64
+#undef CONFIG_DWC2_IC_USB_CAP /* IC Cap */
+
+#endif /* __DWC2_H__ */
diff --git a/include/configs/rpi_b.h b/include/configs/rpi_b.h
index d9475e9..ca27f9a 100644
--- a/include/configs/rpi_b.h
+++ b/include/configs/rpi_b.h
@@ -82,6 +82,16 @@
#define CONFIG_MMC_SDHCI_IO_ACCESSORS
#define CONFIG_BCM2835_SDHCI
+#define CONFIG_CMD_USB
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_DWC2
+#define CONFIG_USB_DWC2_REG_ADDR 0x20980000
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_SMSC95XX
+#define CONFIG_MISC_INIT_R
+#endif
+
/* Console UART */
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK 3000000
@@ -129,13 +139,7 @@
/* Some things don't make sense on this HW or yet */
#undef CONFIG_CMD_FPGA
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
#undef CONFIG_CMD_SAVEENV
-#undef CONFIG_CMD_DHCP
-#undef CONFIG_CMD_MII
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_PING
/* Environment */
#define ENV_DEVICE_SETTINGS \
@@ -176,7 +180,10 @@
"ramdisk_addr_r=0x02100000\0" \
#define BOOT_TARGET_DEVICES(func) \
- func(MMC, mmc, 0)
+ func(MMC, mmc, 0) \
+ func(USB, usb, 0) \
+ func(PXE, pxe, na) \
+ func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>
#define CONFIG_EXTRA_ENV_SETTINGS \
diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h
index 9f65ef9..075d222 100644
--- a/include/linux/usb/musb.h
+++ b/include/linux/usb/musb.h
@@ -14,6 +14,8 @@
#define __deprecated
#endif
+#include <linux/compat.h>
+
/* The USB role is defined by the connector used on the board, so long as
* standards are being followed. (Developer boards sometimes won't.)
*/
diff --git a/include/usb.h b/include/usb.h
index c355fbe..c4a288d 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -150,7 +150,8 @@ enum usb_init_type {
defined(CONFIG_USB_OMAP3) || defined(CONFIG_USB_DA8XX) || \
defined(CONFIG_USB_BLACKFIN) || defined(CONFIG_USB_AM35X) || \
defined(CONFIG_USB_MUSB_DSPS) || defined(CONFIG_USB_MUSB_AM35X) || \
- defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined(CONFIG_USB_XHCI)
+ defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined(CONFIG_USB_XHCI) || \
+ defined(CONFIG_USB_DWC2)
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller);
int usb_lowlevel_stop(int index);