summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--.gitignore1
-rw-r--r--MAINTAINERS15
-rw-r--r--Makefile14
-rw-r--r--README6
-rw-r--r--arch/arm/cpu/arm1136/mx31/generic.c11
-rw-r--r--arch/arm/cpu/arm920t/a320/timer.c134
-rw-r--r--arch/arm/cpu/arm926ejs/Makefile6
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/Makefile2
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c428
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c311
-rw-r--r--arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c73
-rw-r--r--arch/arm/cpu/arm926ejs/mx28/Makefile (renamed from board/csb226/Makefile)11
-rw-r--r--arch/arm/cpu/arm926ejs/mx28/clock.c355
-rw-r--r--arch/arm/cpu/arm926ejs/mx28/iomux.c109
-rw-r--r--arch/arm/cpu/arm926ejs/mx28/mx28.c221
-rw-r--r--arch/arm/cpu/arm926ejs/mx28/timer.c141
-rw-r--r--arch/arm/cpu/armv7/omap-common/Makefile13
-rw-r--r--arch/arm/cpu/armv7/omap-common/clocks-common.c609
-rw-r--r--arch/arm/cpu/armv7/omap-common/emif-common.c1140
-rw-r--r--arch/arm/cpu/armv7/omap-common/hwinit-common.c267
-rw-r--r--arch/arm/cpu/armv7/omap-common/lowlevel_init.S (renamed from arch/arm/cpu/armv7/omap4/lowlevel_init.S)37
-rw-r--r--arch/arm/cpu/armv7/omap-common/mem-common.c (renamed from arch/arm/cpu/armv7/omap4/mem.c)0
-rw-r--r--arch/arm/cpu/armv7/omap-common/spl.c9
-rw-r--r--arch/arm/cpu/armv7/omap4/Makefile11
-rw-r--r--arch/arm/cpu/armv7/omap4/board.c384
-rw-r--r--arch/arm/cpu/armv7/omap4/clocks.c628
-rw-r--r--arch/arm/cpu/armv7/omap4/emif.c1135
-rw-r--r--arch/arm/cpu/armv7/omap4/hwinit.c167
-rw-r--r--arch/arm/cpu/armv7/omap4/omap4_mux_data.h83
-rw-r--r--arch/arm/cpu/armv7/omap4/sdram_elpida.c2
-rw-r--r--arch/arm/cpu/armv7/omap5/Makefile48
-rw-r--r--arch/arm/cpu/armv7/omap5/clocks.c432
-rw-r--r--arch/arm/cpu/armv7/omap5/config.mk28
-rw-r--r--arch/arm/cpu/armv7/omap5/emif.c105
-rw-r--r--arch/arm/cpu/armv7/omap5/hwinit.c78
-rw-r--r--arch/arm/cpu/armv7/omap5/sdram_elpida.c178
-rw-r--r--arch/arm/include/asm/arch-davinci/aintc_defs.h2
-rw-r--r--arch/arm/include/asm/arch-davinci/da850_lowlevel.h (renamed from arch/arm/include/asm/arch-davinci/am1808_lowlevel.h)26
-rw-r--r--arch/arm/include/asm/arch-davinci/ddr2_defs.h4
-rw-r--r--arch/arm/include/asm/arch-davinci/emif_defs.h1
-rw-r--r--arch/arm/include/asm/arch-davinci/hardware.h22
-rw-r--r--arch/arm/include/asm/arch-davinci/pll_defs.h14
-rw-r--r--arch/arm/include/asm/arch-mx28/clock.h61
-rw-r--r--arch/arm/include/asm/arch-mx28/dma.h170
-rw-r--r--arch/arm/include/asm/arch-mx28/gpio.h32
-rw-r--r--arch/arm/include/asm/arch-mx28/imx-regs.h39
-rw-r--r--arch/arm/include/asm/arch-mx28/iomux-mx28.h537
-rw-r--r--arch/arm/include/asm/arch-mx28/iomux.h168
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-apbh.h466
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-base.h88
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-bch.h230
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-clkctrl.h312
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-common.h66
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-gpmi.h222
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-i2c.h207
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-ocotp.h173
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-pinctrl.h1284
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-power.h413
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-rtc.h147
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-ssp.h349
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-timrot.h171
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-usb.h178
-rw-r--r--arch/arm/include/asm/arch-mx28/regs-usbphy.h151
-rw-r--r--arch/arm/include/asm/arch-mx28/sys_proto.h32
-rw-r--r--arch/arm/include/asm/arch-mx31/imx-regs.h7
-rw-r--r--arch/arm/include/asm/arch-omap3/mmc_host_def.h11
-rw-r--r--arch/arm/include/asm/arch-omap4/clocks.h23
-rw-r--r--arch/arm/include/asm/arch-omap4/emif.h1021
-rw-r--r--arch/arm/include/asm/arch-omap4/mmc_host_def.h11
-rw-r--r--arch/arm/include/asm/arch-omap4/omap.h (renamed from arch/arm/include/asm/arch-omap4/omap4.h)46
-rw-r--r--arch/arm/include/asm/arch-omap4/sys_proto.h38
-rw-r--r--arch/arm/include/asm/arch-omap5/clocks.h722
-rw-r--r--arch/arm/include/asm/arch-omap5/cpu.h175
-rw-r--r--arch/arm/include/asm/arch-omap5/gpio.h50
-rw-r--r--arch/arm/include/asm/arch-omap5/i2c.h74
-rw-r--r--arch/arm/include/asm/arch-omap5/mmc_host_def.h174
-rw-r--r--arch/arm/include/asm/arch-omap5/mux_omap5.h344
-rw-r--r--arch/arm/include/asm/arch-omap5/omap.h223
-rw-r--r--arch/arm/include/asm/arch-omap5/sys_proto.h122
-rw-r--r--arch/arm/include/asm/arch-pxa/pxa-regs.h111
-rw-r--r--arch/arm/include/asm/arch-pxa/regs-uart.h109
-rw-r--r--arch/arm/include/asm/armv7.h3
-rw-r--r--arch/arm/include/asm/emif.h1035
-rw-r--r--arch/arm/include/asm/mach-types.h13
-rw-r--r--arch/arm/include/asm/omap_common.h31
-rw-r--r--board/armltd/integrator/arm-ebi.h62
-rw-r--r--board/armltd/integrator/config.mk5
-rw-r--r--board/armltd/integrator/integrator-sc.h91
-rw-r--r--board/armltd/integrator/integrator.c63
-rw-r--r--board/csb226/csb226.c166
-rw-r--r--board/csb226/flash.c368
-rw-r--r--board/davedenx/qong/qong.c2
-rw-r--r--board/davinci/dm6467evm/dm6467evm.c20
-rw-r--r--board/denx/m28evk/Makefile56
-rw-r--r--board/denx/m28evk/m28_init.h (renamed from arch/arm/cpu/armv7/omap4/sys_info.c)48
-rw-r--r--board/denx/m28evk/m28evk.c216
-rw-r--r--board/denx/m28evk/mem_init.c240
-rw-r--r--board/denx/m28evk/mmc_boot.c273
-rw-r--r--board/denx/m28evk/power_init.c913
-rw-r--r--board/denx/m28evk/start.S234
-rw-r--r--board/denx/m28evk/u-boot-spl.lds87
-rw-r--r--board/denx/m28evk/u-boot.bd14
-rw-r--r--board/innokom/flash.c421
-rw-r--r--board/innokom/innokom.c190
-rw-r--r--board/mpl/vcma9/vcma9.c3
-rw-r--r--board/ronetix/pm9261/pm9261.c3
-rw-r--r--board/ronetix/pm9263/pm9263.c3
-rw-r--r--board/ronetix/pm9g45/pm9g45.c2
-rw-r--r--board/syteco/zmx25/zmx25.c2
-rw-r--r--board/ti/omap5_evm/Makefile (renamed from board/innokom/Makefile)12
-rw-r--r--board/ti/omap5_evm/evm.c101
-rw-r--r--board/ti/omap5_evm/mux_data.h275
-rw-r--r--board/ti/panda/Makefile2
-rw-r--r--board/ti/panda/panda.c27
-rw-r--r--board/ti/panda/panda_mux_data.h54
-rw-r--r--board/ti/sdp4430/Makefile4
-rw-r--r--board/ti/sdp4430/sdp.c27
-rw-r--r--board/ti/sdp4430/sdp4430_mux_data.h53
-rw-r--r--board/vpac270/vpac270.c9
-rw-r--r--boards.cfg22
-rw-r--r--common/usb.c13
-rw-r--r--doc/README.m28223
-rw-r--r--drivers/dma/Makefile1
-rw-r--r--drivers/dma/apbh_dma.c691
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/mxs_gpio.c136
-rw-r--r--drivers/i2c/Makefile1
-rw-r--r--drivers/i2c/mxs_i2c.c246
-rw-r--r--drivers/mmc/Makefile1
-rw-r--r--drivers/mmc/mxsmmc.c351
-rw-r--r--drivers/mmc/omap_hsmmc.c26
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/mxs_nand.c1118
-rw-r--r--drivers/mtd/onenand/Makefile4
-rw-r--r--drivers/mtd/onenand/onenand_base.c18
-rw-r--r--drivers/mtd/onenand/onenand_spl.c146
-rw-r--r--drivers/net/davinci_emac.c24
-rw-r--r--drivers/net/fec_mxc.c44
-rw-r--r--drivers/rtc/Makefile1
-rw-r--r--drivers/rtc/mxsrtc.c86
-rw-r--r--drivers/serial/serial_pxa.c464
-rw-r--r--drivers/spi/Makefile1
-rw-r--r--drivers/spi/mxs_spi.c186
-rw-r--r--drivers/usb/host/Makefile1
-rw-r--r--drivers/usb/host/ehci-mxs.c154
-rw-r--r--include/configs/VCMA9.h4
-rw-r--r--include/configs/csb226.h506
-rw-r--r--include/configs/da850_am18xxevm.h245
-rw-r--r--include/configs/davinci_dm6467Tevm.h163
-rw-r--r--include/configs/davinci_dm6467evm.h1
-rw-r--r--include/configs/devkit8000.h1
-rw-r--r--include/configs/innokom.h507
-rw-r--r--include/configs/integratorap.h1
-rw-r--r--include/configs/integratorcp.h1
-rw-r--r--include/configs/m28evk.h303
-rw-r--r--include/configs/omap3_beagle.h2
-rw-r--r--include/configs/omap4_common.h7
-rw-r--r--include/configs/omap5_evm.h284
-rw-r--r--include/configs/pm9261.h3
-rw-r--r--include/configs/pm9263.h3
-rw-r--r--include/configs/pm9g45.h3
-rw-r--r--include/configs/vpac270.h3
-rw-r--r--include/onenand_uboot.h3
-rw-r--r--spl/Makefile4
-rw-r--r--tools/.gitignore1
-rw-r--r--tools/Makefile6
-rw-r--r--tools/mxsboot.c684
167 files changed, 21354 insertions, 6487 deletions
diff --git a/.gitignore b/.gitignore
index 70a11f7..ff4bae0 100644
--- a/.gitignore
+++ b/.gitignore
@@ -36,6 +36,7 @@
/u-boot.lds
/u-boot.ubl
/u-boot.dtb
+/u-boot.sb
#
# Generated files
diff --git a/MAINTAINERS b/MAINTAINERS
index 3c9dba7..94dcb7d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -775,10 +775,6 @@ Dave Peverley <dpeverley@mpc-data.co.uk>
omap730p2 ARM926EJS
-Manikandan Pillai <mani.pillai@ti.com>
-
- omap3_evm ARM ARMV7 (OMAP3xx SoC)
-
Stelian Pop <stelian.pop@leadtechdesign.com>
at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
@@ -786,6 +782,10 @@ Stelian Pop <stelian.pop@leadtechdesign.com>
at91sam9263ek ARM926EJS (AT91SAM9263 SoC)
at91sam9rlek ARM926EJS (AT91SAM9RL SoC)
+Tom Rini <trini@ti.com>
+
+ omap3_evm ARM ARMV7 (OMAP3xx SoC)
+
Tom Rix <Tom.Rix@windriver.com>
omap3_zoom2 ARM ARMV7 (OMAP3xx SoC)
@@ -817,11 +817,6 @@ Heiko Schocher <hs@denx.de>
magnesium i.MX27
mgcoge3un ARM926EJS (Kirkwood SoC)
-Robert Schwebel <r.schwebel@pengutronix.de>
-
- csb226 xscale/pxa
- innokom xscale/pxa
-
Michael Schwingen <michael@schwingen.org>
actux1 xscale/ixp
@@ -850,6 +845,7 @@ Aneesh V <aneesh@ti.com>
omap4_panda ARM ARMV7 (OMAP4xx SoC)
omap4_sdp4430 ARM ARMV7 (OMAP4xx SoC)
+ omap5_evm ARM ARMV7 (OMAP5xx Soc)
Marek Vasut <marek.vasut@gmail.com>
@@ -859,6 +855,7 @@ Marek Vasut <marek.vasut@gmail.com>
palmtc xscale/pxa
vpac270 xscale/pxa
zipitz2 xscale/pxa
+ m28evk i.MX28
efikamx i.MX51
efikasb i.MX51
diff --git a/Makefile b/Makefile
index 294c762..faa65c6 100644
--- a/Makefile
+++ b/Makefile
@@ -290,16 +290,9 @@ LIBS += lib/libfdt/libfdt.o
LIBS += api/libapi.o
LIBS += post/libpost.o
-ifeq ($(SOC),am33xx)
+ifneq ($(CONFIG_AM335X)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
LIBS += $(CPUDIR)/omap-common/libomap-common.o
endif
-ifeq ($(SOC),omap3)
-LIBS += $(CPUDIR)/omap-common/libomap-common.o
-endif
-ifeq ($(SOC),omap4)
-LIBS += $(CPUDIR)/omap-common/libomap-common.o
-endif
-
ifeq ($(SOC),s5pc1xx)
LIBS += $(CPUDIR)/s5p-common/libs5p-common.o
endif
@@ -424,6 +417,10 @@ $(obj)u-boot.ubl: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
rm $(obj)u-boot-ubl.bin
rm $(obj)spl/u-boot-spl-pad.bin
+$(obj)u-boot.sb: $(obj)u-boot.bin $(obj)spl/u-boot-spl.bin
+ elftosb -zdf imx28 -c $(TOPDIR)/board/$(BOARDDIR)/u-boot.bd \
+ -o $(obj)u-boot.sb
+
ifeq ($(CONFIG_SANDBOX),y)
GEN_UBOOT = \
cd $(LNDIR) && $(CC) $(SYMS) -T $(obj)u-boot.lds \
@@ -791,6 +788,7 @@ clobber: clean
@rm -f $(obj)u-boot.imx
@rm -f $(obj)u-boot.ubl
@rm -f $(obj)u-boot.dtb
+ @rm -f $(obj)u-boot.sb
@rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes}
@rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c
@rm -fr $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
diff --git a/README b/README
index 73ca042..07f1d11 100644
--- a/README
+++ b/README
@@ -1027,6 +1027,12 @@ The following options need to be configured:
Define this to use i/o functions instead of macros
(some hardware wont work with macros)
+ CONFIG_DRIVER_TI_EMAC
+ Support for davinci emac
+
+ CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
+ Define this if you have more then 3 PHYs.
+
CONFIG_FTGMAC100
Support for Faraday's FTGMAC100 Gigabit SoC Ethernet
diff --git a/arch/arm/cpu/arm1136/mx31/generic.c b/arch/arm/cpu/arm1136/mx31/generic.c
index 4f27e25..f458281 100644
--- a/arch/arm/cpu/arm1136/mx31/generic.c
+++ b/arch/arm/cpu/arm1136/mx31/generic.c
@@ -27,8 +27,6 @@
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
-#define IOMUXGPR (IOMUXC_BASE + 0x008)
-
static u32 mx31_decode_pll(u32 reg, u32 infreq)
{
u32 mfi = GET_PLL_MFI(reg);
@@ -89,7 +87,7 @@ static u32 mx31_get_hsp_clk(void)
void mx31_dump_clocks(void)
{
u32 cpufreq = mx31_get_mcu_main_clk();
- printf("mx31 cpu clock: %dMHz\n",cpufreq / 1000000);
+ printf("mx31 cpu clock: %dMHz\n", cpufreq / 1000000);
printf("ipg clock : %dHz\n", mx31_get_ipg_clk());
printf("hsp clock : %dHz\n", mx31_get_hsp_clk());
}
@@ -146,14 +144,15 @@ void mx31_set_pad(enum iomux_pins pin, u32 config)
void mx31_set_gpr(enum iomux_gp_func gp, char en)
{
u32 l;
+ struct iomuxc_regs *iomuxc = (struct iomuxc_regs *)IOMUXC_BASE;
- l = readl(IOMUXGPR);
+ l = readl(&iomuxc->gpr);
if (en)
l |= gp;
else
l &= ~gp;
- writel(l, IOMUXGPR);
+ writel(l, &iomuxc->gpr);
}
void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs)
@@ -216,7 +215,7 @@ static char *get_reset_cause(void)
}
#if defined(CONFIG_DISPLAY_CPUINFO)
-int print_cpuinfo (void)
+int print_cpuinfo(void)
{
u32 srev = get_cpu_rev();
diff --git a/arch/arm/cpu/arm920t/a320/timer.c b/arch/arm/cpu/arm920t/a320/timer.c
index 443d31d..4bfcef2 100644
--- a/arch/arm/cpu/arm920t/a320/timer.c
+++ b/arch/arm/cpu/arm920t/a320/timer.c
@@ -18,20 +18,35 @@
*/
#include <common.h>
+#include <div64.h>
#include <asm/io.h>
#include <faraday/ftpmu010.h>
#include <faraday/fttmr010.h>
-static ulong timestamp;
-static ulong lastdec;
-
-static struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
+DECLARE_GLOBAL_DATA_PTR;
#define TIMER_CLOCK 32768
#define TIMER_LOAD_VAL 0xffffffff
+static inline unsigned long long tick_to_time(unsigned long long tick)
+{
+ tick *= CONFIG_SYS_HZ;
+ do_div(tick, gd->timer_rate_hz);
+
+ return tick;
+}
+
+static inline unsigned long long usec_to_tick(unsigned long long usec)
+{
+ usec *= gd->timer_rate_hz;
+ do_div(usec, 1000000);
+
+ return usec;
+}
+
int timer_init(void)
{
+ struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
unsigned int cr;
debug("%s()\n", __func__);
@@ -59,106 +74,57 @@ int timer_init(void)
cr |= FTTMR010_TM3_ENABLE;
writel(cr, &tmr->cr);
- /* init the timestamp and lastdec value */
- reset_timer_masked();
+ gd->timer_rate_hz = TIMER_CLOCK;
+ gd->tbu = gd->tbl = 0;
return 0;
}
/*
- * timer without interrupts
- */
-
-/*
- * reset time
- */
-void reset_timer_masked(void)
-{
- /* capure current decrementer value time */
- lastdec = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
- timestamp = 0; /* start "advancing" time stamp from 0 */
-
- debug("%s(): lastdec = %lx\n", __func__, lastdec);
-}
-
-/*
- * return timer ticks
- */
-ulong get_timer_masked(void)
-{
- /* current tick value */
- ulong now = readl(&tmr->timer3_counter) / (TIMER_CLOCK / CONFIG_SYS_HZ);
-
- debug("%s(): now = %lx, lastdec = %lx\n", __func__, now, lastdec);
-
- if (lastdec >= now) {
- /*
- * normal mode (non roll)
- * move stamp fordward with absoulte diff ticks
- */
- timestamp += lastdec - now;
- } else {
- /*
- * we have overflow of the count down timer
- *
- * nts = ts + ld + (TLV - now)
- * ts=old stamp, ld=time that passed before passing through -1
- * (TLV-now) amount of time after passing though -1
- * nts = new "advancing time stamp"...it could also roll and
- * cause problems.
- */
- timestamp += lastdec + TIMER_LOAD_VAL - now;
- }
-
- lastdec = now;
-
- debug("%s() returns %lx\n", __func__, timestamp);
-
- return timestamp;
-}
-
-/*
- * return difference between timer ticks and base
+ * Get the current 64 bit timer tick count
*/
-ulong get_timer(ulong base)
+unsigned long long get_ticks(void)
{
- debug("%s(%lx)\n", __func__, base);
- return get_timer_masked() - base;
+ struct fttmr010 *tmr = (struct fttmr010 *)CONFIG_FTTMR010_BASE;
+ ulong now = TIMER_LOAD_VAL - readl(&tmr->timer3_counter);
+
+ /* increment tbu if tbl has rolled over */
+ if (now < gd->tbl)
+ gd->tbu++;
+ gd->tbl = now;
+ return (((unsigned long long)gd->tbu) << 32) | gd->tbl;
}
-/* delay x useconds AND preserve advance timestamp value */
void __udelay(unsigned long usec)
{
- long tmo = usec * (TIMER_CLOCK / 1000) / 1000;
- unsigned long now, last = readl(&tmr->timer3_counter);
-
- debug("%s(%lu)\n", __func__, usec);
- while (tmo > 0) {
- now = readl(&tmr->timer3_counter);
- if (now > last) /* count down timer overflow */
- tmo -= TIMER_LOAD_VAL + last - now;
- else
- tmo -= last - now;
- last = now;
- }
+ unsigned long long start;
+ ulong tmo;
+
+ start = get_ticks(); /* get current timestamp */
+ tmo = usec_to_tick(usec); /* convert usecs to ticks */
+ while ((get_ticks() - start) < tmo)
+ ; /* loop till time has passed */
}
/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
+ * get_timer(base) can be used to check for timeouts or
+ * to measure elasped time relative to an event:
+ *
+ * ulong start_time = get_timer(0) sets start_time to the current
+ * time value.
+ * get_timer(start_time) returns the time elapsed since then.
+ *
+ * The time is used in CONFIG_SYS_HZ units!
*/
-unsigned long long get_ticks(void)
+ulong get_timer(ulong base)
{
- debug("%s()\n", __func__);
- return get_timer(0);
+ return tick_to_time(get_ticks()) - base;
}
/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
+ * Return the number of timer ticks per second.
*/
ulong get_tbclk(void)
{
- debug("%s()\n", __func__);
- return CONFIG_SYS_HZ;
+ return gd->timer_rate_hz;
}
diff --git a/arch/arm/cpu/arm926ejs/Makefile b/arch/arm/cpu/arm926ejs/Makefile
index 930e0d1..a56ff08 100644
--- a/arch/arm/cpu/arm926ejs/Makefile
+++ b/arch/arm/cpu/arm926ejs/Makefile
@@ -28,6 +28,12 @@ LIB = $(obj)lib$(CPU).o
START = start.o
COBJS = cpu.o
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_NO_CPU_SUPPORT_CODE
+START :=
+endif
+endif
+
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
START := $(addprefix $(obj),$(START))
diff --git a/arch/arm/cpu/arm926ejs/davinci/Makefile b/arch/arm/cpu/arm926ejs/davinci/Makefile
index 98c7e55..aeb058a 100644
--- a/arch/arm/cpu/arm926ejs/davinci/Makefile
+++ b/arch/arm/cpu/arm926ejs/davinci/Makefile
@@ -28,7 +28,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
COBJS-y += cpu.o timer.o psc.o
-COBJS-$(CONFIG_AM18018_LOWLEVEL) += am1808_lowlevel.o
+COBJS-$(CONFIG_DA850_LOWLEVEL) += da850_lowlevel.o
COBJS-$(CONFIG_SOC_DM355) += dm355.o
COBJS-$(CONFIG_SOC_DM365) += dm365.o
COBJS-$(CONFIG_SOC_DM644X) += dm644x.o
diff --git a/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
deleted file mode 100644
index 1ea4a9f..0000000
--- a/arch/arm/cpu/arm926ejs/davinci/am1808_lowlevel.c
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * SoC-specific lowlevel code for AM1808 and similar chips
- *
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-#include <common.h>
-#include <nand.h>
-#include <ns16550.h>
-#include <post.h>
-#include <asm/arch/am1808_lowlevel.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/ddr2_defs.h>
-#include <asm/arch/emif_defs.h>
-
-void am1808_waitloop(unsigned long loopcnt)
-{
- unsigned long i;
-
- for (i = 0; i < loopcnt; i++)
- asm(" NOP");
-}
-
-int am1808_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
-{
- if (reg == davinci_pllc0_regs)
- /* Unlock PLL registers. */
- clrbits_le32(&davinci_syscfg_regs->cfgchip0, 0x00000010);
-
- /*
- * Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled
- * through MMR
- */
- clrbits_le32(&reg->pllctl, 0x00000020);
- /* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */
- clrbits_le32(&reg->pllctl, 0x00000200);
-
- /* Set PLLEN=0 => PLL BYPASS MODE */
- clrbits_le32(&reg->pllctl, 0x00000001);
-
- am1808_waitloop(150);
-
- if (reg == davinci_pllc0_regs) {
- /*
- * Select the Clock Mode bit 8 as External Clock or On Chip
- * Oscilator
- */
- dv_maskbits(&reg->pllctl, 0xFFFFFEFF);
- setbits_le32(&reg->pllctl, (CONFIG_SYS_DV_CLKMODE << 8));
- }
-
- /* Clear PLLRST bit to reset the PLL */
- clrbits_le32(&reg->pllctl, 0x00000008);
-
- /* Disable the PLL output */
- setbits_le32(&reg->pllctl, 0x00000010);
-
- /* PLL initialization sequence */
- /*
- * Power up the PLL- PWRDN bit set to 0 to bring the PLL out of
- * power down bit
- */
- clrbits_le32(&reg->pllctl, 0x00000002);
-
- /* Enable the PLL from Disable Mode PLLDIS bit to 0 */
- clrbits_le32(&reg->pllctl, 0x00000010);
-
- /* Program the required multiplier value in PLLM */
- writel(pllmult, &reg->pllm);
-
- /* program the postdiv */
- if (reg == davinci_pllc0_regs)
- writel((0x8000 | CONFIG_SYS_AM1808_PLL0_POSTDIV),
- &reg->postdiv);
- else
- writel((0x8000 | CONFIG_SYS_AM1808_PLL1_POSTDIV),
- &reg->postdiv);
-
- /*
- * Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that
- * no GO operation is currently in progress
- */
- while ((readl(&reg->pllstat) & 0x1) == 1)
- ;
-
- if (reg == davinci_pllc0_regs) {
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV1, &reg->plldiv1);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV2, &reg->plldiv2);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV3, &reg->plldiv3);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV4, &reg->plldiv4);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV5, &reg->plldiv5);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV6, &reg->plldiv6);
- writel(CONFIG_SYS_AM1808_PLL0_PLLDIV7, &reg->plldiv7);
- } else {
- writel(CONFIG_SYS_AM1808_PLL1_PLLDIV1, &reg->plldiv1);
- writel(CONFIG_SYS_AM1808_PLL1_PLLDIV2, &reg->plldiv2);
- writel(CONFIG_SYS_AM1808_PLL1_PLLDIV3, &reg->plldiv3);
- }
-
- /*
- * Set the GOSET bit in PLLCMD to 1 to initiate a new divider
- * transition.
- */
- setbits_le32(&reg->pllcmd, 0x01);
-
- /*
- * Wait for the GOSTAT bit in PLLSTAT to clear to 0
- * (completion of phase alignment).
- */
- while ((readl(&reg->pllstat) & 0x1) == 1)
- ;
-
- /* Wait for PLL to reset properly. See PLL spec for PLL reset time */
- am1808_waitloop(200);
-
- /* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
- setbits_le32(&reg->pllctl, 0x00000008);
-
- /* Wait for PLL to lock. See PLL spec for PLL lock time */
- am1808_waitloop(2400);
-
- /*
- * Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
- * mode
- */
- setbits_le32(&reg->pllctl, 0x00000001);
-
-
- /*
- * clear EMIFA and EMIFB clock source settings, let them
- * run off SYSCLK
- */
- if (reg == davinci_pllc0_regs)
- dv_maskbits(&davinci_syscfg_regs->cfgchip3, 0xFFFFFFF8);
-
- return 0;
-}
-
-void am1808_lpc_transition(unsigned char pscnum, unsigned char module,
- unsigned char domain, unsigned char state)
-{
- struct davinci_psc_regs *reg;
- dv_reg_p mdstat, mdctl;
-
- if (pscnum == 0) {
- reg = davinci_psc0_regs;
- mdstat = &reg->psc0.mdstat[module];
- mdctl = &reg->psc0.mdctl[module];
- } else {
- reg = davinci_psc1_regs;
- mdstat = &reg->psc1.mdstat[module];
- mdctl = &reg->psc1.mdctl[module];
- }
-
- /* Wait for any outstanding transition to complete */
- while ((readl(&reg->ptstat) & (0x00000001 << domain)))
- ;
-
- /* If we are already in that state, just return */
- if ((readl(mdstat) & 0x1F) == state)
- return;
-
- /* Perform transition */
- writel((readl(mdctl) & 0xFFFFFFE0) | state, mdctl);
- setbits_le32(&reg->ptcmd, (0x00000001 << domain));
-
- /* Wait for transition to complete */
- while (readl(&reg->ptstat) & (0x00000001 << domain))
- ;
-
- /* Wait and verify the state */
- while ((readl(mdstat) & 0x1F) != state)
- ;
-}
-
-int am1808_ddr_setup(unsigned int freq)
-{
- unsigned long tmp;
-
- /* Enable the Clock to DDR2/mDDR */
- am1808_lpc_transition(1, 6, 0, PSC_ENABLE);
-
- tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
- if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) {
- /* Begin VTP Calibration */
- clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
- clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
- clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
-
- /* Polling READY bit to see when VTP calibration is done */
- tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
- while ((tmp & VTP_READY) != VTP_READY)
- tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
-
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
-
- setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
- }
-
- writel(CONFIG_SYS_AM1808_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
- clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
- (1 << DDR_SLEW_CMOSEN_BIT));
-
- setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK);
-
- writel((CONFIG_SYS_AM1808_DDR2_SDBCR & ~0xf0000000) |
- (readl(&dv_ddr2_regs_ctrl->sdbcr) & 0xf0000000), /*rsv Bytes*/
- &dv_ddr2_regs_ctrl->sdbcr);
- writel(CONFIG_SYS_AM1808_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2);
-
- writel(CONFIG_SYS_AM1808_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
- writel(CONFIG_SYS_AM1808_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
-
- clrbits_le32(&dv_ddr2_regs_ctrl->sdbcr,
- (1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT));
-
- /*
- * LPMODEN and MCLKSTOPEN must be set!
- * Without this bits set, PSC don;t switch states !!
- */
- writel(CONFIG_SYS_AM1808_DDR2_SDRCR |
- (1 << DV_DDR_SRCR_LPMODEN_SHIFT) |
- (1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT),
- &dv_ddr2_regs_ctrl->sdrcr);
-
- /* SyncReset the Clock to EMIF3A SDRAM */
- am1808_lpc_transition(1, 6, 0, PSC_SYNCRESET);
- /* Enable the Clock to EMIF3A SDRAM */
- am1808_lpc_transition(1, 6, 0, PSC_ENABLE);
-
- /* disable self refresh */
- clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr, 0xc0000000);
- writel(0x30, &dv_ddr2_regs_ctrl->pbbpr);
-
- return 0;
-}
-
-static void am1808_set_mdctl(dv_reg_p mdctl)
-{
- if ((readl(mdctl) & 0x1F) != PSC_ENABLE)
- writel(((readl(mdctl) & 0xFFFFFFE0) | PSC_ENABLE), mdctl);
-}
-
-void am1808_psc_init(void)
-{
- struct davinci_psc_regs *reg;
- int i;
-
- /* PSC 0 domain 0 init */
- reg = davinci_psc0_regs;
- while ((readl(&reg->ptstat) & 0x00000001))
- ;
-
- for (i = 3; i <= 4 ; i++)
- am1808_set_mdctl(&reg->psc0.mdctl[i]);
-
- for (i = 7; i <= 12 ; i++)
- am1808_set_mdctl(&reg->psc0.mdctl[i]);
-
- /* Do Always-On Power Domain Transitions */
- setbits_le32(&reg->ptcmd, 0x00000001);
- while (readl(&reg->ptstat) & 0x00000001)
- ;
-
- /* PSC1, domain 1 init */
- reg = davinci_psc1_regs;
- while ((readl(&reg->ptstat) & 0x00000001))
- ;
-
- am1808_set_mdctl(&reg->psc1.mdctl[3]);
- am1808_set_mdctl(&reg->psc1.mdctl[6]);
-
- /* UART1 + UART2 */
- for (i = 12 ; i <= 13 ; i++)
- am1808_set_mdctl(&reg->psc1.mdctl[i]);
-
- am1808_set_mdctl(&reg->psc1.mdctl[26]);
- am1808_set_mdctl(&reg->psc1.mdctl[31]);
-
- /* Do Always-On Power Domain Transitions */
- setbits_le32(&reg->ptcmd, 0x00000001);
- while (readl(&reg->ptstat) & 0x00000001)
- ;
-}
-
-void am1808_pinmux_ctl(unsigned long offset, unsigned long mask,
- unsigned long value)
-{
- clrbits_le32(&davinci_syscfg_regs->pinmux[offset], mask);
- setbits_le32(&davinci_syscfg_regs->pinmux[offset], (mask & value));
-}
-
-__attribute__((weak))
-void board_gpio_init(void)
-{
- return;
-}
-
-#if defined(CONFIG_NAND_SPL)
-void nand_boot(void)
-{
- __attribute__((noreturn)) void (*uboot)(void);
-
- /* copy image from NOR to RAM */
- memcpy((void *)CONFIG_SYS_NAND_U_BOOT_DST,
- (void *)CONFIG_SYS_NAND_U_BOOT_OFFS,
- CONFIG_SYS_NAND_U_BOOT_SIZE);
-
- /* and jump to it ... */
- uboot = (void *)CONFIG_SYS_NAND_U_BOOT_START;
- (*uboot)();
-}
-#endif
-
-#if defined(CONFIG_NAND_SPL)
-void board_init_f(ulong bootflag)
-#else
-int arch_cpu_init(void)
-#endif
-{
- /*
- * copied from arch/arm/cpu/arm926ejs/start.S
- *
- * flush v4 I/D caches
- */
- asm("mov r0, #0");
- asm("mcr p15, 0, r0, c7, c7, 0"); /* flush v3/v4 cache */
- asm("mcr p15, 0, r0, c8, c7, 0"); /* flush v4 TLB */
-
- /*
- * disable MMU stuff and caches
- */
- asm("mrc p15, 0, r0, c1, c0, 0");
- /* clear bits 13, 9:8 (--V- --RS) */
- asm("bic r0, r0, #0x00002300");
- /* clear bits 7, 2:0 (B--- -CAM) */
- asm("bic r0, r0, #0x00000087");
- /* set bit 2 (A) Align */
- asm("orr r0, r0, #0x00000002");
- /* set bit 12 (I) I-Cache */
- asm("orr r0, r0, #0x00001000");
- asm("mcr p15, 0, r0, c1, c0, 0");
-
- /* Unlock kick registers */
- writel(0x83e70b13, &davinci_syscfg_regs->kick0);
- writel(0x95a4f1e0, &davinci_syscfg_regs->kick1);
-
- dv_maskbits(&davinci_syscfg_regs->suspsrc,
- ((1 << 27) | (1 << 22) | (1 << 20) | (1 << 5) | (1 << 16)));
-
- /* System PSC setup - enable all */
- am1808_psc_init();
-
- /* Setup Pinmux */
- am1808_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX0);
- am1808_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX1);
- am1808_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX2);
- am1808_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX3);
- am1808_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX4);
- am1808_pinmux_ctl(5, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX5);
- am1808_pinmux_ctl(6, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX6);
- am1808_pinmux_ctl(7, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX7);
- am1808_pinmux_ctl(8, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX8);
- am1808_pinmux_ctl(9, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX9);
- am1808_pinmux_ctl(10, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX10);
- am1808_pinmux_ctl(11, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX11);
- am1808_pinmux_ctl(12, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX12);
- am1808_pinmux_ctl(13, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX13);
- am1808_pinmux_ctl(14, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX14);
- am1808_pinmux_ctl(15, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX15);
- am1808_pinmux_ctl(16, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX16);
- am1808_pinmux_ctl(17, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX17);
- am1808_pinmux_ctl(18, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX18);
- am1808_pinmux_ctl(19, 0xFFFFFFFF, CONFIG_SYS_AM1808_PINMUX19);
-
- /* PLL setup */
- am1808_pll_init(davinci_pllc0_regs, CONFIG_SYS_AM1808_PLL0_PLLM);
- am1808_pll_init(davinci_pllc1_regs, CONFIG_SYS_AM1808_PLL1_PLLM);
-
- /* GPIO setup */
- board_gpio_init();
-
- /* setup CSn config */
- writel(CONFIG_SYS_AM1808_CS2CFG, &davinci_emif_regs->ab1cr);
- writel(CONFIG_SYS_AM1808_CS3CFG, &davinci_emif_regs->ab2cr);
-
- am1808_lpc_transition(1, 13, 0, PSC_ENABLE);
- NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
- CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
-
- /*
- * Fix Power and Emulation Management Register
- * see sprufw3a.pdf page 37 Table 24
- */
- writel(readl((CONFIG_SYS_NS16550_COM1 + 0x30)) | 0x00006001,
- (CONFIG_SYS_NS16550_COM1 + 0x30));
-#if defined(CONFIG_NAND_SPL)
- puts("ddr init\n");
- am1808_ddr_setup(132);
-
- puts("boot u-boot ...\n");
-
- nand_boot();
-#else
- am1808_ddr_setup(132);
- return 0;
-#endif
-}
diff --git a/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
new file mode 100644
index 0000000..c7ec70f
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/davinci/da850_lowlevel.c
@@ -0,0 +1,311 @@
+/*
+ * SoC-specific lowlevel code for DA850
+ *
+ * Copyright (C) 2011
+ * Heiko Schocher, DENX Software Engineering, hs@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+#include <nand.h>
+#include <ns16550.h>
+#include <post.h>
+#include <asm/arch/da850_lowlevel.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/ddr2_defs.h>
+#include <asm/arch/emif_defs.h>
+#include <asm/arch/pll_defs.h>
+
+void da850_waitloop(unsigned long loopcnt)
+{
+ unsigned long i;
+
+ for (i = 0; i < loopcnt; i++)
+ asm(" NOP");
+}
+
+int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult)
+{
+ if (reg == davinci_pllc0_regs)
+ /* Unlock PLL registers. */
+ clrbits_le32(&davinci_syscfg_regs->cfgchip0, PLL_MASTER_LOCK);
+
+ /*
+ * Set PLLENSRC '0',bit 5, PLL Enable(PLLEN) selection is controlled
+ * through MMR
+ */
+ clrbits_le32(&reg->pllctl, PLLCTL_PLLENSRC);
+ /* PLLCTL.EXTCLKSRC bit 9 should be left at 0 for Freon */
+ clrbits_le32(&reg->pllctl, PLLCTL_EXTCLKSRC);
+
+ /* Set PLLEN=0 => PLL BYPASS MODE */
+ clrbits_le32(&reg->pllctl, PLLCTL_PLLEN);
+
+ da850_waitloop(150);
+
+ if (reg == davinci_pllc0_regs) {
+ /*
+ * Select the Clock Mode bit 8 as External Clock or On Chip
+ * Oscilator
+ */
+ dv_maskbits(&reg->pllctl, ~PLLCTL_RES_9);
+ setbits_le32(&reg->pllctl,
+ (CONFIG_SYS_DV_CLKMODE << PLLCTL_CLOCK_MODE_SHIFT));
+ }
+
+ /* Clear PLLRST bit to reset the PLL */
+ clrbits_le32(&reg->pllctl, PLLCTL_PLLRST);
+
+ /* Disable the PLL output */
+ setbits_le32(&reg->pllctl, PLLCTL_PLLDIS);
+
+ /* PLL initialization sequence */
+ /*
+ * Power up the PLL- PWRDN bit set to 0 to bring the PLL out of
+ * power down bit
+ */
+ clrbits_le32(&reg->pllctl, PLLCTL_PLLPWRDN);
+
+ /* Enable the PLL from Disable Mode PLLDIS bit to 0 */
+ clrbits_le32(&reg->pllctl, PLLCTL_PLLDIS);
+
+ /* Program the required multiplier value in PLLM */
+ writel(pllmult, &reg->pllm);
+
+ /* program the postdiv */
+ if (reg == davinci_pllc0_regs)
+ writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL0_POSTDIV),
+ &reg->postdiv);
+ else
+ writel((PLL_POSTDEN | CONFIG_SYS_DA850_PLL1_POSTDIV),
+ &reg->postdiv);
+
+ /*
+ * Check for the GOSTAT bit in PLLSTAT to clear to 0 to indicate that
+ * no GO operation is currently in progress
+ */
+ while ((readl(&reg->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
+ ;
+
+ if (reg == davinci_pllc0_regs) {
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV1, &reg->plldiv1);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV2, &reg->plldiv2);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV3, &reg->plldiv3);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV4, &reg->plldiv4);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV5, &reg->plldiv5);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV6, &reg->plldiv6);
+ writel(CONFIG_SYS_DA850_PLL0_PLLDIV7, &reg->plldiv7);
+ } else {
+ writel(CONFIG_SYS_DA850_PLL1_PLLDIV1, &reg->plldiv1);
+ writel(CONFIG_SYS_DA850_PLL1_PLLDIV2, &reg->plldiv2);
+ writel(CONFIG_SYS_DA850_PLL1_PLLDIV3, &reg->plldiv3);
+ }
+
+ /*
+ * Set the GOSET bit in PLLCMD to 1 to initiate a new divider
+ * transition.
+ */
+ setbits_le32(&reg->pllcmd, PLLCMD_GOSTAT);
+
+ /*
+ * Wait for the GOSTAT bit in PLLSTAT to clear to 0
+ * (completion of phase alignment).
+ */
+ while ((readl(&reg->pllstat) & PLLCMD_GOSTAT) == PLLCMD_GOSTAT)
+ ;
+
+ /* Wait for PLL to reset properly. See PLL spec for PLL reset time */
+ da850_waitloop(200);
+
+ /* Set the PLLRST bit in PLLCTL to 1 to bring the PLL out of reset */
+ setbits_le32(&reg->pllctl, PLLCTL_PLLRST);
+
+ /* Wait for PLL to lock. See PLL spec for PLL lock time */
+ da850_waitloop(2400);
+
+ /*
+ * Set the PLLEN bit in PLLCTL to 1 to remove the PLL from bypass
+ * mode
+ */
+ setbits_le32(&reg->pllctl, PLLCTL_PLLEN);
+
+
+ /*
+ * clear EMIFA and EMIFB clock source settings, let them
+ * run off SYSCLK
+ */
+ if (reg == davinci_pllc0_regs)
+ dv_maskbits(&davinci_syscfg_regs->cfgchip3,
+ ~(PLL_SCSCFG3_DIV45PENA | PLL_SCSCFG3_EMA_CLKSRC));
+
+ return 0;
+}
+
+int da850_ddr_setup(void)
+{
+ unsigned long tmp;
+
+ /* Enable the Clock to DDR2/mDDR */
+ lpsc_on(DAVINCI_LPSC_DDR_EMIF);
+
+ tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+ if ((tmp & VTP_POWERDWN) == VTP_POWERDWN) {
+ /* Begin VTP Calibration */
+ clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
+ clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+ clrbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_CLKRZ);
+
+ /* Polling READY bit to see when VTP calibration is done */
+ tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+ while ((tmp & VTP_READY) != VTP_READY)
+ tmp = readl(&davinci_syscfg1_regs->vtpio_ctl);
+
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_LOCK);
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_POWERDWN);
+
+ setbits_le32(&davinci_syscfg1_regs->vtpio_ctl, VTP_IOPWRDWN);
+ }
+
+ writel(CONFIG_SYS_DA850_DDR2_DDRPHYCR, &dv_ddr2_regs_ctrl->ddrphycr);
+ clrbits_le32(&davinci_syscfg1_regs->ddr_slew,
+ (1 << DDR_SLEW_CMOSEN_BIT));
+
+ /*
+ * SDRAM Configuration Register (SDCR):
+ * First set the BOOTUNLOCK bit to make configuration bits
+ * writeable.
+ */
+ setbits_le32(&dv_ddr2_regs_ctrl->sdbcr, DV_DDR_BOOTUNLOCK);
+
+ /*
+ * Write the new value of these bits and clear BOOTUNLOCK.
+ * At the same time, set the TIMUNLOCK bit to allow changing
+ * the timing registers
+ */
+ tmp = CONFIG_SYS_DA850_DDR2_SDBCR;
+ tmp &= ~DV_DDR_BOOTUNLOCK;
+ tmp |= DV_DDR_TIMUNLOCK;
+ writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
+
+ /* write memory configuration and timing */
+ writel(CONFIG_SYS_DA850_DDR2_SDBCR2, &dv_ddr2_regs_ctrl->sdbcr2);
+ writel(CONFIG_SYS_DA850_DDR2_SDTIMR, &dv_ddr2_regs_ctrl->sdtimr);
+ writel(CONFIG_SYS_DA850_DDR2_SDTIMR2, &dv_ddr2_regs_ctrl->sdtimr2);
+
+ /* clear the TIMUNLOCK bit and write the value of the CL field */
+ tmp &= ~DV_DDR_TIMUNLOCK;
+ writel(tmp, &dv_ddr2_regs_ctrl->sdbcr);
+
+ /*
+ * LPMODEN and MCLKSTOPEN must be set!
+ * Without this bits set, PSC don;t switch states !!
+ */
+ writel(CONFIG_SYS_DA850_DDR2_SDRCR |
+ (1 << DV_DDR_SRCR_LPMODEN_SHIFT) |
+ (1 << DV_DDR_SRCR_MCLKSTOPEN_SHIFT),
+ &dv_ddr2_regs_ctrl->sdrcr);
+
+ /* SyncReset the Clock to EMIF3A SDRAM */
+ lpsc_syncreset(DAVINCI_LPSC_DDR_EMIF);
+ /* Enable the Clock to EMIF3A SDRAM */
+ lpsc_on(DAVINCI_LPSC_DDR_EMIF);
+
+ /* disable self refresh */
+ clrbits_le32(&dv_ddr2_regs_ctrl->sdrcr,
+ DV_DDR_SDRCR_LPMODEN | DV_DDR_SDRCR_LPMODEN);
+ writel(CONFIG_SYS_DA850_DDR2_PBBPR, &dv_ddr2_regs_ctrl->pbbpr);
+
+ return 0;
+}
+
+void da850_pinmux_ctl(unsigned long offset, unsigned long mask,
+ unsigned long value)
+{
+ clrbits_le32(&davinci_syscfg_regs->pinmux[offset], mask);
+ setbits_le32(&davinci_syscfg_regs->pinmux[offset], (mask & value));
+}
+
+__attribute__((weak))
+void board_gpio_init(void)
+{
+ return;
+}
+
+int arch_cpu_init(void)
+{
+ /* Unlock kick registers */
+ writel(DV_SYSCFG_KICK0_UNLOCK, &davinci_syscfg_regs->kick0);
+ writel(DV_SYSCFG_KICK1_UNLOCK, &davinci_syscfg_regs->kick1);
+
+ dv_maskbits(&davinci_syscfg_regs->suspsrc,
+ CONFIG_SYS_DA850_SYSCFG_SUSPSRC);
+
+ /* Setup Pinmux */
+ da850_pinmux_ctl(0, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX0);
+ da850_pinmux_ctl(1, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX1);
+ da850_pinmux_ctl(2, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX2);
+ da850_pinmux_ctl(3, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX3);
+ da850_pinmux_ctl(4, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX4);
+ da850_pinmux_ctl(5, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX5);
+ da850_pinmux_ctl(6, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX6);
+ da850_pinmux_ctl(7, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX7);
+ da850_pinmux_ctl(8, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX8);
+ da850_pinmux_ctl(9, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX9);
+ da850_pinmux_ctl(10, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX10);
+ da850_pinmux_ctl(11, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX11);
+ da850_pinmux_ctl(12, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX12);
+ da850_pinmux_ctl(13, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX13);
+ da850_pinmux_ctl(14, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX14);
+ da850_pinmux_ctl(15, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX15);
+ da850_pinmux_ctl(16, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX16);
+ da850_pinmux_ctl(17, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX17);
+ da850_pinmux_ctl(18, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX18);
+ da850_pinmux_ctl(19, 0xFFFFFFFF, CONFIG_SYS_DA850_PINMUX19);
+
+ /* PLL setup */
+ da850_pll_init(davinci_pllc0_regs, CONFIG_SYS_DA850_PLL0_PLLM);
+ da850_pll_init(davinci_pllc1_regs, CONFIG_SYS_DA850_PLL1_PLLM);
+
+ /* GPIO setup */
+ board_gpio_init();
+
+ /* setup CSn config */
+#if defined(CONFIG_SYS_DA850_CS2CFG)
+ writel(CONFIG_SYS_DA850_CS2CFG, &davinci_emif_regs->ab1cr);
+#endif
+#if defined(CONFIG_SYS_DA850_CS3CFG)
+ writel(CONFIG_SYS_DA850_CS3CFG, &davinci_emif_regs->ab2cr);
+#endif
+
+ lpsc_on(CONFIG_SYS_DA850_LPSC_UART);
+ NS16550_init((NS16550_t)(CONFIG_SYS_NS16550_COM1),
+ CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+
+ /*
+ * Fix Power and Emulation Management Register
+ * see sprufw3a.pdf page 37 Table 24
+ */
+ writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
+ DAVINCI_UART_PWREMU_MGMT_UTRST),
+ &davinci_uart2_ctrl_regs->pwremu_mgmt);
+
+ da850_ddr_setup();
+ return 0;
+}
diff --git a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
index 3772e64..6e998de 100644
--- a/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
+++ b/arch/arm/cpu/arm926ejs/davinci/dm365_lowlevel.c
@@ -45,7 +45,8 @@ int dm365_pll1_init(unsigned long pllmult, unsigned long prediv)
clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_PLLPWRDN);
clrbits_le32(&dv_pll0_regs->pllctl, PLLCTL_RES_9);
- setbits_le32(&dv_pll0_regs->pllctl, clksrc << 8);
+ setbits_le32(&dv_pll0_regs->pllctl,
+ clksrc << PLLCTL_CLOCK_MODE_SHIFT);
/*
* Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled
@@ -82,7 +83,7 @@ int dm365_pll1_init(unsigned long pllmult, unsigned long prediv)
writel(PLLSECCTL_STOPMODE | PLLSECCTL_TINITZ, &dv_pll0_regs->secctl);
/* Program the PostDiv for PLL1 */
- writel(0x8000, &dv_pll0_regs->postdiv);
+ writel(PLL_POSTDEN, &dv_pll0_regs->postdiv);
/* Post divider setting for PLL1 */
writel(CONFIG_SYS_DM36x_PLL1_PLLDIV1, &dv_pll0_regs->plldiv1);
@@ -126,7 +127,8 @@ int dm365_pll2_init(unsigned long pllm, unsigned long prediv)
* VDB has input on MXI pin
*/
clrbits_le32(&dv_pll1_regs->pllctl, PLLCTL_RES_9);
- setbits_le32(&dv_pll1_regs->pllctl, clksrc << 8);
+ setbits_le32(&dv_pll1_regs->pllctl,
+ clksrc << PLLCTL_CLOCK_MODE_SHIFT);
/*
* Set PLLENSRC '0', PLL Enable(PLLEN) selection is controlled
@@ -151,7 +153,7 @@ int dm365_pll2_init(unsigned long pllm, unsigned long prediv)
writel(pllm, &dv_pll1_regs->pllm);
writel(prediv, &dv_pll1_regs->prediv);
- writel(0x8000, &dv_pll1_regs->postdiv);
+ writel(PLL_POSTDEN, &dv_pll1_regs->postdiv);
/* Assert TENABLE = 1, TENABLEDIV = 1, TINITZ = 1 */
writel(PLLSECCTL_STOPMODE | PLLSECCTL_TENABLEDIV | PLLSECCTL_TENABLE |
@@ -261,21 +263,23 @@ void dm365_vpss_sync_reset(void)
VPSS_CLK_CTL_VPSS_CLKMD);
/* LPSC SyncReset DDR Clock Enable */
- writel(((readl(&dv_psc_regs->mdctl[47]) & ~PSC_MD_STATE_MSK) |
- PSC_SYNCRESET), &dv_psc_regs->mdctl[47]);
+ writel(((readl(&dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]) &
+ ~PSC_MD_STATE_MSK) | PSC_SYNCRESET),
+ &dv_psc_regs->mdctl[DAVINCI_LPSC_VPSSMASTER]);
writel((1 << PdNum), &dv_psc_regs->ptcmd);
while (!(((readl(&dv_psc_regs->ptstat) >> PdNum) & PSC_GOSTAT) == 0))
;
- while (!((readl(&dv_psc_regs->mdstat[47]) & PSC_MD_STATE_MSK) ==
- PSC_SYNCRESET))
+ while (!((readl(&dv_psc_regs->mdstat[DAVINCI_LPSC_VPSSMASTER]) &
+ PSC_MD_STATE_MSK) == PSC_SYNCRESET))
;
}
void dm365_por_reset(void)
{
- if (readl(&dv_pll0_regs->rstype) & 3)
+ if (readl(&dv_pll0_regs->rstype) &
+ (PLL_RSTYPE_POR | PLL_RSTYPE_XWRST))
dm365_vpss_sync_reset();
}
@@ -291,19 +295,20 @@ void dm365_psc_init(void)
for (lpscgroup = lpscmin; lpscgroup <= lpscmax; lpscgroup++) {
if (lpscgroup == 0) {
- lpsc_start = 0; /* Enabling LPSC 3 to 28 SCR first */
- lpsc_end = 28;
+ /* Enabling LPSC 3 to 28 SCR first */
+ lpsc_start = DAVINCI_LPSC_VPSSMSTR;
+ lpsc_end = DAVINCI_LPSC_TIMER1;
} else if (lpscgroup == 1) { /* Skip locked LPSCs [29-37] */
- lpsc_start = 38;
- lpsc_end = 47;
+ lpsc_start = DAVINCI_LPSC_CFG5;
+ lpsc_end = DAVINCI_LPSC_VPSSMASTER;
} else {
- lpsc_start = 50;
- lpsc_end = 51;
+ lpsc_start = DAVINCI_LPSC_MJCP;
+ lpsc_end = DAVINCI_LPSC_HDVICP;
}
/* NEXT=0x3, Enable LPSC's */
for (i = lpsc_start; i <= lpsc_end; i++)
- setbits_le32(&dv_psc_regs->mdctl[i], 0x3);
+ setbits_le32(&dv_psc_regs->mdctl[i], PSC_ENABLE);
/*
* Program goctl to start transition sequence for LPSCs
@@ -322,7 +327,7 @@ void dm365_psc_init(void)
/* Wait for MODSTAT = ENABLE from LPSC's */
for (i = lpsc_start; i <= lpsc_end; i++)
while (!((readl(&dv_psc_regs->mdstat[i]) &
- PSC_MD_STATE_MSK) == 0x3))
+ PSC_MD_STATE_MSK) == PSC_ENABLE))
;
}
}
@@ -332,7 +337,7 @@ static void dm365_emif_init(void)
writel(CONFIG_SYS_DM36x_AWCCR, &davinci_emif_regs->awccr);
writel(CONFIG_SYS_DM36x_AB1CR, &davinci_emif_regs->ab1cr);
- setbits_le32(&davinci_emif_regs->nandfcr, 1);
+ setbits_le32(&davinci_emif_regs->nandfcr, DAVINCI_NANDFCR_CS2NAND);
writel(CONFIG_SYS_DM36x_AB2CR, &davinci_emif_regs->ab2cr);
@@ -361,31 +366,12 @@ int post_log(char *format, ...)
void dm36x_lowlevel_init(ulong bootflag)
{
- /*
- * copied from arch/arm/cpu/arm926ejs/start.S
- *
- * flush v4 I/D caches
- */
- asm("mov r0, #0");
- asm("mcr p15, 0, r0, c7, c7, 0"); /* flush v3/v4 cache */
- asm("mcr p15, 0, r0, c8, c7, 0"); /* flush v4 TLB */
-
- /*
- * disable MMU stuff and caches
- */
- asm("mrc p15, 0, r0, c1, c0, 0");
- /* clear bits 13, 9:8 (--V- --RS) */
- asm("bic r0, r0, #0x00002300");
- /* clear bits 7, 2:0 (B--- -CAM) */
- asm("bic r0, r0, #0x00000087");
- /* set bit 2 (A) Align */
- asm("orr r0, r0, #0x00000002");
- /* set bit 12 (I) I-Cache */
- asm("orr r0, r0, #0x00001000");
- asm("mcr p15, 0, r0, c1, c0, 0");
+ struct davinci_uart_ctrl_regs *davinci_uart_ctrl_regs =
+ (struct davinci_uart_ctrl_regs *)(CONFIG_SYS_NS16550_COM1 +
+ DAVINCI_UART_CTRL_BASE);
/* Mask all interrupts */
- writel(0x04, &dv_aintc_regs->intctl);
+ writel(DV_AINTC_INTCTL_IDMODE, &dv_aintc_regs->intctl);
writel(0x0, &dv_aintc_regs->eabase);
writel(0x0, &dv_aintc_regs->eint0);
writel(0x0, &dv_aintc_regs->eint1);
@@ -422,7 +408,10 @@ void dm36x_lowlevel_init(ulong bootflag)
* Fix Power and Emulation Management Register
* see sprufh2.pdf page 38 Table 22
*/
- writel(0x0000e003, (CONFIG_SYS_NS16550_COM1 + 0x30));
+ writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
+ DAVINCI_UART_PWREMU_MGMT_UTRST),
+ &davinci_uart_ctrl_regs->pwremu_mgmt);
+
puts("ddr init\n");
dm365_ddr_setup();
diff --git a/board/csb226/Makefile b/arch/arm/cpu/arm926ejs/mx28/Makefile
index 6fe9bec..7845310 100644
--- a/board/csb226/Makefile
+++ b/arch/arm/cpu/arm926ejs/mx28/Makefile
@@ -23,14 +23,17 @@
include $(TOPDIR)/config.mk
-LIB = $(obj)lib$(BOARD).o
+LIB = $(obj)lib$(SOC).o
-COBJS := csb226.o flash.o
+COBJS = clock.o mx28.o iomux.o timer.o
-SRCS := $(COBJS:.o=.c)
+SRCS := $(START:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
+START := $(addprefix $(obj),$(START))
-$(LIB): $(obj).depend $(OBJS)
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
$(call cmd_link_o_target, $(OBJS))
#########################################################################
diff --git a/arch/arm/cpu/arm926ejs/mx28/clock.c b/arch/arm/cpu/arm926ejs/mx28/clock.c
new file mode 100644
index 0000000..f698506
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx28/clock.c
@@ -0,0 +1,355 @@
+/*
+ * Freescale i.MX28 clock setup code
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+
+/* The PLL frequency is always 480MHz, see section 10.2 in iMX28 datasheet. */
+#define PLL_FREQ_KHZ 480000
+#define PLL_FREQ_COEF 18
+/* The XTAL frequency is always 24MHz, see section 10.2 in iMX28 datasheet. */
+#define XTAL_FREQ_KHZ 24000
+
+#define PLL_FREQ_MHZ (PLL_FREQ_KHZ / 1000)
+#define XTAL_FREQ_MHZ (XTAL_FREQ_KHZ / 1000)
+
+static uint32_t mx28_get_pclk(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ uint32_t clkctrl, clkseq, clkfrac;
+ uint32_t frac, div;
+
+ clkctrl = readl(&clkctrl_regs->hw_clkctrl_cpu);
+
+ /* No support of fractional divider calculation */
+ if (clkctrl &
+ (CLKCTRL_CPU_DIV_XTAL_FRAC_EN | CLKCTRL_CPU_DIV_CPU_FRAC_EN)) {
+ return 0;
+ }
+
+ clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+
+ /* XTAL Path */
+ if (clkseq & CLKCTRL_CLKSEQ_BYPASS_CPU) {
+ div = (clkctrl & CLKCTRL_CPU_DIV_XTAL_MASK) >>
+ CLKCTRL_CPU_DIV_XTAL_OFFSET;
+ return XTAL_FREQ_MHZ / div;
+ }
+
+ /* REF Path */
+ clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac0);
+ frac = clkfrac & CLKCTRL_FRAC0_CPUFRAC_MASK;
+ div = clkctrl & CLKCTRL_CPU_DIV_CPU_MASK;
+ return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
+}
+
+static uint32_t mx28_get_hclk(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ uint32_t div;
+ uint32_t clkctrl;
+
+ clkctrl = readl(&clkctrl_regs->hw_clkctrl_hbus);
+
+ /* No support of fractional divider calculation */
+ if (clkctrl & CLKCTRL_HBUS_DIV_FRAC_EN)
+ return 0;
+
+ div = clkctrl & CLKCTRL_HBUS_DIV_MASK;
+ return mx28_get_pclk() / div;
+}
+
+static uint32_t mx28_get_emiclk(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ uint32_t frac, div;
+ uint32_t clkctrl, clkseq, clkfrac;
+
+ clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+ clkctrl = readl(&clkctrl_regs->hw_clkctrl_emi);
+
+ /* XTAL Path */
+ if (clkseq & CLKCTRL_CLKSEQ_BYPASS_EMI) {
+ div = (clkctrl & CLKCTRL_EMI_DIV_XTAL_MASK) >>
+ CLKCTRL_EMI_DIV_XTAL_OFFSET;
+ return XTAL_FREQ_MHZ / div;
+ }
+
+ clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac0);
+
+ /* REF Path */
+ frac = (clkfrac & CLKCTRL_FRAC0_EMIFRAC_MASK) >>
+ CLKCTRL_FRAC0_EMIFRAC_OFFSET;
+ div = clkctrl & CLKCTRL_EMI_DIV_EMI_MASK;
+ return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
+}
+
+static uint32_t mx28_get_gpmiclk(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ uint32_t frac, div;
+ uint32_t clkctrl, clkseq, clkfrac;
+
+ clkseq = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+ clkctrl = readl(&clkctrl_regs->hw_clkctrl_gpmi);
+
+ /* XTAL Path */
+ if (clkseq & CLKCTRL_CLKSEQ_BYPASS_GPMI) {
+ div = clkctrl & CLKCTRL_GPMI_DIV_MASK;
+ return XTAL_FREQ_MHZ / div;
+ }
+
+ clkfrac = readl(&clkctrl_regs->hw_clkctrl_frac1);
+
+ /* REF Path */
+ frac = (clkfrac & CLKCTRL_FRAC1_GPMIFRAC_MASK) >>
+ CLKCTRL_FRAC1_GPMIFRAC_OFFSET;
+ div = clkctrl & CLKCTRL_GPMI_DIV_MASK;
+ return (PLL_FREQ_MHZ * PLL_FREQ_COEF / frac) / div;
+}
+
+/*
+ * Set IO clock frequency, in kHz
+ */
+void mx28_set_ioclk(enum mxs_ioclock io, uint32_t freq)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ uint32_t div;
+
+ if (freq == 0)
+ return;
+
+ if (io > MXC_IOCLK1)
+ return;
+
+ div = (PLL_FREQ_KHZ * PLL_FREQ_COEF) / freq;
+
+ if (div < 18)
+ div = 18;
+
+ if (div > 35)
+ div = 35;
+
+ if (io == MXC_IOCLK0) {
+ writel(CLKCTRL_FRAC0_CLKGATEIO0,
+ &clkctrl_regs->hw_clkctrl_frac0_set);
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0,
+ CLKCTRL_FRAC0_IO0FRAC_MASK,
+ div << CLKCTRL_FRAC0_IO0FRAC_OFFSET);
+ writel(CLKCTRL_FRAC0_CLKGATEIO0,
+ &clkctrl_regs->hw_clkctrl_frac0_clr);
+ } else {
+ writel(CLKCTRL_FRAC0_CLKGATEIO1,
+ &clkctrl_regs->hw_clkctrl_frac0_set);
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0,
+ CLKCTRL_FRAC0_IO1FRAC_MASK,
+ div << CLKCTRL_FRAC0_IO1FRAC_OFFSET);
+ writel(CLKCTRL_FRAC0_CLKGATEIO1,
+ &clkctrl_regs->hw_clkctrl_frac0_clr);
+ }
+}
+
+/*
+ * Get IO clock, returns IO clock in kHz
+ */
+static uint32_t mx28_get_ioclk(enum mxs_ioclock io)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ uint32_t tmp, ret;
+
+ if (io > MXC_IOCLK1)
+ return 0;
+
+ tmp = readl(&clkctrl_regs->hw_clkctrl_frac0);
+
+ if (io == MXC_IOCLK0)
+ ret = (tmp & CLKCTRL_FRAC0_IO0FRAC_MASK) >>
+ CLKCTRL_FRAC0_IO0FRAC_OFFSET;
+ else
+ ret = (tmp & CLKCTRL_FRAC0_IO1FRAC_MASK) >>
+ CLKCTRL_FRAC0_IO1FRAC_OFFSET;
+
+ return (PLL_FREQ_KHZ * PLL_FREQ_COEF) / ret;
+}
+
+/*
+ * Configure SSP clock frequency, in kHz
+ */
+void mx28_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ uint32_t clk, clkreg;
+
+ if (ssp > MXC_SSPCLK3)
+ return;
+
+ clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) +
+ (ssp * sizeof(struct mx28_register));
+
+ clrbits_le32(clkreg, CLKCTRL_SSP_CLKGATE);
+ while (readl(clkreg) & CLKCTRL_SSP_CLKGATE)
+ ;
+
+ if (xtal)
+ clk = XTAL_FREQ_KHZ;
+ else
+ clk = mx28_get_ioclk(ssp >> 1);
+
+ if (freq > clk)
+ return;
+
+ /* Calculate the divider and cap it if necessary */
+ clk /= freq;
+ if (clk > CLKCTRL_SSP_DIV_MASK)
+ clk = CLKCTRL_SSP_DIV_MASK;
+
+ clrsetbits_le32(clkreg, CLKCTRL_SSP_DIV_MASK, clk);
+ while (readl(clkreg) & CLKCTRL_SSP_BUSY)
+ ;
+
+ if (xtal)
+ writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp,
+ &clkctrl_regs->hw_clkctrl_clkseq_set);
+ else
+ writel(CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp,
+ &clkctrl_regs->hw_clkctrl_clkseq_clr);
+}
+
+/*
+ * Return SSP frequency, in kHz
+ */
+static uint32_t mx28_get_sspclk(enum mxs_sspclock ssp)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ uint32_t clkreg;
+ uint32_t clk, tmp;
+
+ if (ssp > MXC_SSPCLK3)
+ return 0;
+
+ tmp = readl(&clkctrl_regs->hw_clkctrl_clkseq);
+ if (tmp & (CLKCTRL_CLKSEQ_BYPASS_SSP0 << ssp))
+ return XTAL_FREQ_KHZ;
+
+ clkreg = (uint32_t)(&clkctrl_regs->hw_clkctrl_ssp0) +
+ (ssp * sizeof(struct mx28_register));
+
+ tmp = readl(clkreg) & CLKCTRL_SSP_DIV_MASK;
+
+ if (tmp == 0)
+ return 0;
+
+ clk = mx28_get_ioclk(ssp >> 1);
+
+ return clk / tmp;
+}
+
+/*
+ * Set SSP/MMC bus frequency, in kHz)
+ */
+void mx28_set_ssp_busclock(unsigned int bus, uint32_t freq)
+{
+ struct mx28_ssp_regs *ssp_regs;
+ const uint32_t sspclk = mx28_get_sspclk(bus);
+ uint32_t reg;
+ uint32_t divide, rate, tgtclk;
+
+ ssp_regs = (struct mx28_ssp_regs *)(MXS_SSP0_BASE + (bus * 0x2000));
+
+ /*
+ * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)),
+ * CLOCK_DIVIDE has to be an even value from 2 to 254, and
+ * CLOCK_RATE could be any integer from 0 to 255.
+ */
+ for (divide = 2; divide < 254; divide += 2) {
+ rate = sspclk / freq / divide;
+ if (rate <= 256)
+ break;
+ }
+
+ tgtclk = sspclk / divide / rate;
+ while (tgtclk > freq) {
+ rate++;
+ tgtclk = sspclk / divide / rate;
+ }
+ if (rate > 256)
+ rate = 256;
+
+ /* Always set timeout the maximum */
+ reg = SSP_TIMING_TIMEOUT_MASK |
+ (divide << SSP_TIMING_CLOCK_DIVIDE_OFFSET) |
+ ((rate - 1) << SSP_TIMING_CLOCK_RATE_OFFSET);
+ writel(reg, &ssp_regs->hw_ssp_timing);
+
+ debug("SPI%d: Set freq rate to %d KHz (requested %d KHz)\n",
+ bus, tgtclk, freq);
+}
+
+uint32_t mxc_get_clock(enum mxc_clock clk)
+{
+ switch (clk) {
+ case MXC_ARM_CLK:
+ return mx28_get_pclk() * 1000000;
+ case MXC_GPMI_CLK:
+ return mx28_get_gpmiclk() * 1000000;
+ case MXC_AHB_CLK:
+ case MXC_IPG_CLK:
+ return mx28_get_hclk() * 1000000;
+ case MXC_EMI_CLK:
+ return mx28_get_emiclk();
+ case MXC_IO0_CLK:
+ return mx28_get_ioclk(MXC_IOCLK0);
+ case MXC_IO1_CLK:
+ return mx28_get_ioclk(MXC_IOCLK1);
+ case MXC_SSP0_CLK:
+ return mx28_get_sspclk(MXC_SSPCLK0);
+ case MXC_SSP1_CLK:
+ return mx28_get_sspclk(MXC_SSPCLK1);
+ case MXC_SSP2_CLK:
+ return mx28_get_sspclk(MXC_SSPCLK2);
+ case MXC_SSP3_CLK:
+ return mx28_get_sspclk(MXC_SSPCLK3);
+ }
+
+ return 0;
+}
diff --git a/arch/arm/cpu/arm926ejs/mx28/iomux.c b/arch/arm/cpu/arm926ejs/mx28/iomux.c
new file mode 100644
index 0000000..9ea411f
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx28/iomux.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright 2004-2006,2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+
+#if defined(CONFIG_MX23)
+#define DRIVE_OFFSET 0x200
+#define PULL_OFFSET 0x400
+#elif defined(CONFIG_MX28)
+#define DRIVE_OFFSET 0x300
+#define PULL_OFFSET 0x600
+#else
+#error "Please select CONFIG_MX23 or CONFIG_MX28"
+#endif
+
+/*
+ * configures a single pad in the iomuxer
+ */
+int mxs_iomux_setup_pad(iomux_cfg_t pad)
+{
+ u32 reg, ofs, bp, bm;
+ void *iomux_base = (void *)MXS_PINCTRL_BASE;
+ struct mx28_register *mxs_reg;
+
+ /* muxsel */
+ ofs = 0x100;
+ ofs += PAD_BANK(pad) * 0x20 + PAD_PIN(pad) / 16 * 0x10;
+ bp = PAD_PIN(pad) % 16 * 2;
+ bm = 0x3 << bp;
+ reg = readl(iomux_base + ofs);
+ reg &= ~bm;
+ reg |= PAD_MUXSEL(pad) << bp;
+ writel(reg, iomux_base + ofs);
+
+ /* drive */
+ ofs = DRIVE_OFFSET;
+ ofs += PAD_BANK(pad) * 0x40 + PAD_PIN(pad) / 8 * 0x10;
+ /* mA */
+ if (PAD_MA_VALID(pad)) {
+ bp = PAD_PIN(pad) % 8 * 4;
+ bm = 0x3 << bp;
+ reg = readl(iomux_base + ofs);
+ reg &= ~bm;
+ reg |= PAD_MA(pad) << bp;
+ writel(reg, iomux_base + ofs);
+ }
+ /* vol */
+ if (PAD_VOL_VALID(pad)) {
+ bp = PAD_PIN(pad) % 8 * 4 + 2;
+ mxs_reg = (struct mx28_register *)(iomux_base + ofs);
+ if (PAD_VOL(pad))
+ writel(1 << bp, &mxs_reg->reg_set);
+ else
+ writel(1 << bp, &mxs_reg->reg_clr);
+ }
+
+ /* pull */
+ if (PAD_PULL_VALID(pad)) {
+ ofs = PULL_OFFSET;
+ ofs += PAD_BANK(pad) * 0x10;
+ bp = PAD_PIN(pad);
+ mxs_reg = (struct mx28_register *)(iomux_base + ofs);
+ if (PAD_PULL(pad))
+ writel(1 << bp, &mxs_reg->reg_set);
+ else
+ writel(1 << bp, &mxs_reg->reg_clr);
+ }
+
+ return 0;
+}
+
+int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count)
+{
+ const iomux_cfg_t *p = pad_list;
+ int i;
+ int ret;
+
+ for (i = 0; i < count; i++) {
+ ret = mxs_iomux_setup_pad(*p);
+ if (ret)
+ return ret;
+ p++;
+ }
+
+ return 0;
+}
diff --git a/arch/arm/cpu/arm926ejs/mx28/mx28.c b/arch/arm/cpu/arm926ejs/mx28/mx28.c
new file mode 100644
index 0000000..088c019
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx28/mx28.c
@@ -0,0 +1,221 @@
+/*
+ * Freescale i.MX28 common code
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* 1 second delay should be plenty of time for block reset. */
+#define RESET_MAX_TIMEOUT 1000000
+
+#define MX28_BLOCK_SFTRST (1 << 31)
+#define MX28_BLOCK_CLKGATE (1 << 30)
+
+/* Lowlevel init isn't used on i.MX28, so just have a dummy here */
+inline void lowlevel_init(void) {}
+
+void reset_cpu(ulong ignored) __attribute__((noreturn));
+
+void reset_cpu(ulong ignored)
+{
+
+ struct mx28_rtc_regs *rtc_regs =
+ (struct mx28_rtc_regs *)MXS_RTC_BASE;
+
+ /* Wait 1 uS before doing the actual watchdog reset */
+ writel(1, &rtc_regs->hw_rtc_watchdog);
+ writel(RTC_CTRL_WATCHDOGEN, &rtc_regs->hw_rtc_ctrl_set);
+
+ /* Endless loop, reset will exit from here */
+ for (;;)
+ ;
+}
+
+int mx28_wait_mask_set(struct mx28_register *reg, uint32_t mask, int timeout)
+{
+ while (--timeout) {
+ if ((readl(&reg->reg) & mask) == mask)
+ break;
+ udelay(1);
+ }
+
+ return !timeout;
+}
+
+int mx28_wait_mask_clr(struct mx28_register *reg, uint32_t mask, int timeout)
+{
+ while (--timeout) {
+ if ((readl(&reg->reg) & mask) == 0)
+ break;
+ udelay(1);
+ }
+
+ return !timeout;
+}
+
+int mx28_reset_block(struct mx28_register *reg)
+{
+ /* Clear SFTRST */
+ writel(MX28_BLOCK_SFTRST, &reg->reg_clr);
+
+ if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
+ return 1;
+
+ /* Clear CLKGATE */
+ writel(MX28_BLOCK_CLKGATE, &reg->reg_clr);
+
+ /* Set SFTRST */
+ writel(MX28_BLOCK_SFTRST, &reg->reg_set);
+
+ /* Wait for CLKGATE being set */
+ if (mx28_wait_mask_set(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
+ return 1;
+
+ /* Clear SFTRST */
+ writel(MX28_BLOCK_SFTRST, &reg->reg_clr);
+
+ if (mx28_wait_mask_clr(reg, MX28_BLOCK_SFTRST, RESET_MAX_TIMEOUT))
+ return 1;
+
+ /* Clear CLKGATE */
+ writel(MX28_BLOCK_CLKGATE, &reg->reg_clr);
+
+ if (mx28_wait_mask_clr(reg, MX28_BLOCK_CLKGATE, RESET_MAX_TIMEOUT))
+ return 1;
+
+ return 0;
+}
+
+void mx28_fixup_vt(uint32_t start_addr)
+{
+ uint32_t *vt = (uint32_t *)0x20;
+ int i;
+
+ for (i = 0; i < 8; i++)
+ vt[i] = start_addr + (4 * i);
+}
+
+#ifdef CONFIG_ARCH_MISC_INIT
+int arch_misc_init(void)
+{
+ mx28_fixup_vt(gd->relocaddr);
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_ARCH_CPU_INIT
+int arch_cpu_init(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ extern uint32_t _start;
+
+ mx28_fixup_vt((uint32_t)&_start);
+
+ /*
+ * Enable NAND clock
+ */
+ /* Clear bypass bit */
+ writel(CLKCTRL_CLKSEQ_BYPASS_GPMI,
+ &clkctrl_regs->hw_clkctrl_clkseq_set);
+
+ /* Set GPMI clock to ref_gpmi / 12 */
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_gpmi,
+ CLKCTRL_GPMI_CLKGATE | CLKCTRL_GPMI_DIV_MASK, 1);
+
+ udelay(1000);
+
+ /*
+ * Configure GPIO unit
+ */
+ mxs_gpio_init();
+
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_DISPLAY_CPUINFO)
+int print_cpuinfo(void)
+{
+ printf("Freescale i.MX28 family\n");
+ return 0;
+}
+#endif
+
+int do_mx28_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+ printf("CPU: %3d MHz\n", mxc_get_clock(MXC_ARM_CLK) / 1000000);
+ printf("BUS: %3d MHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000000);
+ printf("EMI: %3d MHz\n", mxc_get_clock(MXC_EMI_CLK));
+ printf("GPMI: %3d MHz\n", mxc_get_clock(MXC_GPMI_CLK) / 1000000);
+ return 0;
+}
+
+/*
+ * Initializes on-chip ethernet controllers.
+ */
+#ifdef CONFIG_CMD_NET
+int cpu_eth_init(bd_t *bis)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ /* Turn on ENET clocks */
+ clrbits_le32(&clkctrl_regs->hw_clkctrl_enet,
+ CLKCTRL_ENET_SLEEP | CLKCTRL_ENET_DISABLE);
+
+ /* Set up ENET PLL for 50 MHz */
+ /* Power on ENET PLL */
+ writel(CLKCTRL_PLL2CTRL0_POWER,
+ &clkctrl_regs->hw_clkctrl_pll2ctrl0_set);
+
+ udelay(10);
+
+ /* Gate on ENET PLL */
+ writel(CLKCTRL_PLL2CTRL0_CLKGATE,
+ &clkctrl_regs->hw_clkctrl_pll2ctrl0_clr);
+
+ /* Enable pad output */
+ setbits_le32(&clkctrl_regs->hw_clkctrl_enet, CLKCTRL_ENET_CLK_OUT_EN);
+
+ return 0;
+}
+#endif
+
+U_BOOT_CMD(
+ clocks, CONFIG_SYS_MAXARGS, 1, do_mx28_showclocks,
+ "display clocks",
+ ""
+);
diff --git a/arch/arm/cpu/arm926ejs/mx28/timer.c b/arch/arm/cpu/arm926ejs/mx28/timer.c
new file mode 100644
index 0000000..dbc904d
--- /dev/null
+++ b/arch/arm/cpu/arm926ejs/mx28/timer.c
@@ -0,0 +1,141 @@
+/*
+ * Freescale i.MX28 timer driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * (C) Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+/* Maximum fixed count */
+#define TIMER_LOAD_VAL 0xffffffff
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define timestamp (gd->tbl)
+#define lastdec (gd->lastinc)
+
+/*
+ * This driver uses 1kHz clock source.
+ */
+#define MX28_INCREMENTER_HZ 1000
+
+static inline unsigned long tick_to_time(unsigned long tick)
+{
+ return tick / (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ);
+}
+
+static inline unsigned long time_to_tick(unsigned long time)
+{
+ return time * (MX28_INCREMENTER_HZ / CONFIG_SYS_HZ);
+}
+
+/* Calculate how many ticks happen in "us" microseconds */
+static inline unsigned long us_to_tick(unsigned long us)
+{
+ return (us * MX28_INCREMENTER_HZ) / 1000000;
+}
+
+int timer_init(void)
+{
+ struct mx28_timrot_regs *timrot_regs =
+ (struct mx28_timrot_regs *)MXS_TIMROT_BASE;
+
+ /* Reset Timers and Rotary Encoder module */
+ mx28_reset_block(&timrot_regs->hw_timrot_rotctrl_reg);
+
+ /* Set fixed_count to 0 */
+ writel(0, &timrot_regs->hw_timrot_fixed_count0);
+
+ /* Set UPDATE bit and 1Khz frequency */
+ writel(TIMROT_TIMCTRLn_UPDATE | TIMROT_TIMCTRLn_RELOAD |
+ TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL,
+ &timrot_regs->hw_timrot_timctrl0);
+
+ /* Set fixed_count to maximal value */
+ writel(TIMER_LOAD_VAL, &timrot_regs->hw_timrot_fixed_count0);
+
+ return 0;
+}
+
+ulong get_timer(ulong base)
+{
+ struct mx28_timrot_regs *timrot_regs =
+ (struct mx28_timrot_regs *)MXS_TIMROT_BASE;
+
+ /* Current tick value */
+ uint32_t now = readl(&timrot_regs->hw_timrot_running_count0);
+
+ if (lastdec >= now) {
+ /*
+ * normal mode (non roll)
+ * move stamp forward with absolut diff ticks
+ */
+ timestamp += (lastdec - now);
+ } else {
+ /* we have rollover of decrementer */
+ timestamp += (TIMER_LOAD_VAL - now) + lastdec;
+
+ }
+ lastdec = now;
+
+ return tick_to_time(timestamp) - base;
+}
+
+/* We use the HW_DIGCTL_MICROSECONDS register for sub-millisecond timer. */
+#define MX28_HW_DIGCTL_MICROSECONDS 0x8001c0c0
+
+void __udelay(unsigned long usec)
+{
+ uint32_t old, new, incr;
+ uint32_t counter = 0;
+
+ old = readl(MX28_HW_DIGCTL_MICROSECONDS);
+
+ while (counter < usec) {
+ new = readl(MX28_HW_DIGCTL_MICROSECONDS);
+
+ /* Check if the timer wrapped. */
+ if (new < old) {
+ incr = 0xffffffff - old;
+ incr += new;
+ } else {
+ incr = new - old;
+ }
+
+ /*
+ * Check if we are close to the maximum time and the counter
+ * would wrap if incremented. If that's the case, break out
+ * from the loop as the requested delay time passed.
+ */
+ if (counter + incr < counter)
+ break;
+
+ counter += incr;
+ old = new;
+ }
+}
diff --git a/arch/arm/cpu/armv7/omap-common/Makefile b/arch/arm/cpu/armv7/omap-common/Makefile
index 1dee81f..a684611 100644
--- a/arch/arm/cpu/armv7/omap-common/Makefile
+++ b/arch/arm/cpu/armv7/omap-common/Makefile
@@ -33,6 +33,13 @@ ifdef CONFIG_OMAP
COBJS += gpio.o
endif
+ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+COBJS += hwinit-common.o
+COBJS += clocks-common.o
+COBJS += emif-common.o
+SOBJS += lowlevel_init.o
+endif
+
ifdef CONFIG_SPL_BUILD
COBJS += spl.o
ifdef CONFIG_SPL_NAND_SUPPORT
@@ -43,6 +50,12 @@ COBJS += spl_mmc.o
endif
endif
+ifndef CONFIG_SPL_BUILD
+ifneq ($(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
+COBJS += mem-common.o
+endif
+endif
+
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
new file mode 100644
index 0000000..f64a10b
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -0,0 +1,609 @@
+/*
+ *
+ * Clock initialization for OMAP4
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * Based on previous work by:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/gpio.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+#include <asm/omap_gpio.h>
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * printing to console doesn't work unless
+ * this code is executed from SPL
+ */
+#define printf(fmt, args...)
+#define puts(s)
+#endif
+
+static inline u32 __get_sys_clk_index(void)
+{
+ u32 ind;
+ /*
+ * For ES1 the ROM code calibration of sys clock is not reliable
+ * due to hw issue. So, use hard-coded value. If this value is not
+ * correct for any board over-ride this function in board file
+ * From ES2.0 onwards you will get this information from
+ * CM_SYS_CLKSEL
+ */
+ if (omap_revision() == OMAP4430_ES1_0)
+ ind = OMAP_SYS_CLK_IND_38_4_MHZ;
+ else {
+ /* SYS_CLKSEL - 1 to match the dpll param array indices */
+ ind = (readl(&prcm->cm_sys_clksel) &
+ CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1;
+ }
+ return ind;
+}
+
+u32 get_sys_clk_index(void)
+ __attribute__ ((weak, alias("__get_sys_clk_index")));
+
+u32 get_sys_clk_freq(void)
+{
+ u8 index = get_sys_clk_index();
+ return sys_clk_array[index];
+}
+
+static inline void do_bypass_dpll(u32 *const base)
+{
+ struct dpll_regs *dpll_regs = (struct dpll_regs *)base;
+
+ clrsetbits_le32(&dpll_regs->cm_clkmode_dpll,
+ CM_CLKMODE_DPLL_DPLL_EN_MASK,
+ DPLL_EN_FAST_RELOCK_BYPASS <<
+ CM_CLKMODE_DPLL_EN_SHIFT);
+}
+
+static inline void wait_for_bypass(u32 *const base)
+{
+ struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+ if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll,
+ LDELAY)) {
+ printf("Bypassing DPLL failed %p\n", base);
+ }
+}
+
+static inline void do_lock_dpll(u32 *const base)
+{
+ struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+ clrsetbits_le32(&dpll_regs->cm_clkmode_dpll,
+ CM_CLKMODE_DPLL_DPLL_EN_MASK,
+ DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT);
+}
+
+static inline void wait_for_lock(u32 *const base)
+{
+ struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+ if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK,
+ &dpll_regs->cm_idlest_dpll, LDELAY)) {
+ printf("DPLL locking failed for %p\n", base);
+ hang();
+ }
+}
+
+inline u32 check_for_lock(u32 *const base)
+{
+ struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+ u32 lock = readl(&dpll_regs->cm_idlest_dpll) & ST_DPLL_CLK_MASK;
+
+ return lock;
+}
+
+static void do_setup_dpll(u32 *const base, const struct dpll_params *params,
+ u8 lock, char *dpll)
+{
+ u32 temp, M, N;
+ struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+ temp = readl(&dpll_regs->cm_clksel_dpll);
+
+ if (check_for_lock(base)) {
+ /*
+ * The Dpll has already been locked by rom code using CH.
+ * Check if M,N are matching with Ideal nominal opp values.
+ * If matches, skip the rest otherwise relock.
+ */
+ M = (temp & CM_CLKSEL_DPLL_M_MASK) >> CM_CLKSEL_DPLL_M_SHIFT;
+ N = (temp & CM_CLKSEL_DPLL_N_MASK) >> CM_CLKSEL_DPLL_N_SHIFT;
+ if ((M != (params->m)) || (N != (params->n))) {
+ debug("\n %s Dpll locked, but not for ideal M = %d,"
+ "N = %d values, current values are M = %d,"
+ "N= %d" , dpll, params->m, params->n,
+ M, N);
+ } else {
+ /* Dpll locked with ideal values for nominal opps. */
+ debug("\n %s Dpll already locked with ideal"
+ "nominal opp values", dpll);
+ goto setup_post_dividers;
+ }
+ }
+
+ bypass_dpll(base);
+
+ /* Set M & N */
+ temp &= ~CM_CLKSEL_DPLL_M_MASK;
+ temp |= (params->m << CM_CLKSEL_DPLL_M_SHIFT) & CM_CLKSEL_DPLL_M_MASK;
+
+ temp &= ~CM_CLKSEL_DPLL_N_MASK;
+ temp |= (params->n << CM_CLKSEL_DPLL_N_SHIFT) & CM_CLKSEL_DPLL_N_MASK;
+
+ writel(temp, &dpll_regs->cm_clksel_dpll);
+
+ /* Lock */
+ if (lock)
+ do_lock_dpll(base);
+
+setup_post_dividers:
+ setup_post_dividers(base, params);
+
+ /* Wait till the DPLL locks */
+ if (lock)
+ wait_for_lock(base);
+}
+
+u32 omap_ddr_clk(void)
+{
+ u32 ddr_clk, sys_clk_khz, omap_rev, divider;
+ const struct dpll_params *core_dpll_params;
+
+ omap_rev = omap_revision();
+ sys_clk_khz = get_sys_clk_freq() / 1000;
+
+ core_dpll_params = get_core_dpll_params();
+
+ debug("sys_clk %d\n ", sys_clk_khz * 1000);
+
+ /* Find Core DPLL locked frequency first */
+ ddr_clk = sys_clk_khz * 2 * core_dpll_params->m /
+ (core_dpll_params->n + 1);
+
+ if (omap_rev < OMAP5430_ES1_0) {
+ /*
+ * DDR frequency is PHY_ROOT_CLK/2
+ * PHY_ROOT_CLK = Fdpll/2/M2
+ */
+ divider = 4;
+ } else {
+ /*
+ * DDR frequency is PHY_ROOT_CLK
+ * PHY_ROOT_CLK = Fdpll/2/M2
+ */
+ divider = 2;
+ }
+
+ ddr_clk = ddr_clk / divider / core_dpll_params->m2;
+ ddr_clk *= 1000; /* convert to Hz */
+ debug("ddr_clk %d\n ", ddr_clk);
+
+ return ddr_clk;
+}
+
+/*
+ * Lock MPU dpll
+ *
+ * Resulting MPU frequencies:
+ * 4430 ES1.0 : 600 MHz
+ * 4430 ES2.x : 792 MHz (OPP Turbo)
+ * 4460 : 920 MHz (OPP Turbo) - DCC disabled
+ */
+void configure_mpu_dpll(void)
+{
+ const struct dpll_params *params;
+ struct dpll_regs *mpu_dpll_regs;
+ u32 omap_rev;
+ omap_rev = omap_revision();
+
+ /*
+ * DCC and clock divider settings for 4460.
+ * DCC is required, if more than a certain frequency is required.
+ * For, 4460 > 1GHZ.
+ * 5430 > 1.4GHZ.
+ */
+ if ((omap_rev >= OMAP4460_ES1_0) && (omap_rev < OMAP5430_ES1_0)) {
+ mpu_dpll_regs =
+ (struct dpll_regs *)&prcm->cm_clkmode_dpll_mpu;
+ bypass_dpll(&prcm->cm_clkmode_dpll_mpu);
+ clrbits_le32(&prcm->cm_mpu_mpu_clkctrl,
+ MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK);
+ setbits_le32(&prcm->cm_mpu_mpu_clkctrl,
+ MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK);
+ clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll,
+ CM_CLKSEL_DCC_EN_MASK);
+ }
+
+ params = get_mpu_dpll_params();
+
+ do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu");
+ debug("MPU DPLL locked\n");
+}
+
+static void setup_dplls(void)
+{
+ u32 sysclk_ind, temp;
+ const struct dpll_params *params;
+ debug("setup_dplls\n");
+
+ sysclk_ind = get_sys_clk_index();
+
+ /* CORE dpll */
+ params = get_core_dpll_params(); /* default - safest */
+ /*
+ * Do not lock the core DPLL now. Just set it up.
+ * Core DPLL will be locked after setting up EMIF
+ * using the FREQ_UPDATE method(freq_update_core())
+ */
+ do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, DPLL_NO_LOCK,
+ "core");
+ /* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */
+ temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) |
+ (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) |
+ (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT);
+ writel(temp, &prcm->cm_clksel_core);
+ debug("Core DPLL configured\n");
+
+ /* lock PER dpll */
+ params = get_per_dpll_params();
+ do_setup_dpll(&prcm->cm_clkmode_dpll_per,
+ params, DPLL_LOCK, "per");
+ debug("PER DPLL locked\n");
+
+ /* MPU dpll */
+ configure_mpu_dpll();
+}
+
+#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL
+static void setup_non_essential_dplls(void)
+{
+ u32 sys_clk_khz, abe_ref_clk;
+ u32 sysclk_ind, sd_div, num, den;
+ const struct dpll_params *params;
+
+ sysclk_ind = get_sys_clk_index();
+ sys_clk_khz = get_sys_clk_freq() / 1000;
+
+ /* IVA */
+ clrsetbits_le32(&prcm->cm_bypclk_dpll_iva,
+ CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2);
+
+ params = get_iva_dpll_params();
+ do_setup_dpll(&prcm->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva");
+
+ /*
+ * USB:
+ * USB dpll is J-type. Need to set DPLL_SD_DIV for jitter correction
+ * DPLL_SD_DIV = CEILING ([DPLL_MULT/(DPLL_DIV+1)]* CLKINP / 250)
+ * - where CLKINP is sys_clk in MHz
+ * Use CLKINP in KHz and adjust the denominator accordingly so
+ * that we have enough accuracy and at the same time no overflow
+ */
+ params = get_usb_dpll_params();
+ num = params->m * sys_clk_khz;
+ den = (params->n + 1) * 250 * 1000;
+ num += den - 1;
+ sd_div = num / den;
+ clrsetbits_le32(&prcm->cm_clksel_dpll_usb,
+ CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK,
+ sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT);
+
+ /* Now setup the dpll with the regular function */
+ do_setup_dpll(&prcm->cm_clkmode_dpll_usb, params, DPLL_LOCK, "usb");
+
+ /* Configure ABE dpll */
+ params = get_abe_dpll_params();
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+ abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
+#else
+ abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK;
+ /*
+ * We need to enable some additional options to achieve
+ * 196.608MHz from 32768 Hz
+ */
+ setbits_le32(&prcm->cm_clkmode_dpll_abe,
+ CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK|
+ CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK|
+ CM_CLKMODE_DPLL_LPMODE_EN_MASK|
+ CM_CLKMODE_DPLL_REGM4XEN_MASK);
+ /* Spend 4 REFCLK cycles at each stage */
+ clrsetbits_le32(&prcm->cm_clkmode_dpll_abe,
+ CM_CLKMODE_DPLL_RAMP_RATE_MASK,
+ 1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT);
+#endif
+
+ /* Select the right reference clk */
+ clrsetbits_le32(&prcm->cm_abe_pll_ref_clksel,
+ CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK,
+ abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT);
+ /* Lock the dpll */
+ do_setup_dpll(&prcm->cm_clkmode_dpll_abe, params, DPLL_LOCK, "abe");
+}
+#endif
+
+void do_scale_tps62361(u32 reg, u32 volt_mv)
+{
+ u32 temp, step;
+
+ step = volt_mv - TPS62361_BASE_VOLT_MV;
+ step /= 10;
+
+ /*
+ * Select SET1 in TPS62361:
+ * VSEL1 is grounded on board. So the following selects
+ * VSEL1 = 0 and VSEL0 = 1
+ */
+ gpio_direction_output(TPS62361_VSEL0_GPIO, 0);
+ gpio_set_value(TPS62361_VSEL0_GPIO, 1);
+
+ temp = TPS62361_I2C_SLAVE_ADDR |
+ (reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) |
+ (step << PRM_VC_VAL_BYPASS_DATA_SHIFT) |
+ PRM_VC_VAL_BYPASS_VALID_BIT;
+ debug("do_scale_tps62361: volt - %d step - 0x%x\n", volt_mv, step);
+
+ writel(temp, &prcm->prm_vc_val_bypass);
+ if (!wait_on_value(PRM_VC_VAL_BYPASS_VALID_BIT, 0,
+ &prcm->prm_vc_val_bypass, LDELAY)) {
+ puts("Scaling voltage failed for vdd_mpu from TPS\n");
+ }
+}
+
+void do_scale_vcore(u32 vcore_reg, u32 volt_mv)
+{
+ u32 temp, offset_code;
+ u32 step = 12660; /* 12.66 mV represented in uV */
+ u32 offset = volt_mv;
+
+ /* convert to uV for better accuracy in the calculations */
+ offset *= 1000;
+
+ if (omap_revision() == OMAP4430_ES1_0)
+ offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV;
+ else
+ offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV;
+
+ offset_code = (offset + step - 1) / step;
+ /* The code starts at 1 not 0 */
+ offset_code++;
+
+ debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv,
+ offset_code);
+
+ temp = SMPS_I2C_SLAVE_ADDR |
+ (vcore_reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) |
+ (offset_code << PRM_VC_VAL_BYPASS_DATA_SHIFT) |
+ PRM_VC_VAL_BYPASS_VALID_BIT;
+ writel(temp, &prcm->prm_vc_val_bypass);
+ if (!wait_on_value(PRM_VC_VAL_BYPASS_VALID_BIT, 0,
+ &prcm->prm_vc_val_bypass, LDELAY)) {
+ printf("Scaling voltage failed for 0x%x\n", vcore_reg);
+ }
+}
+
+static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode)
+{
+ clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK,
+ enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT);
+ debug("Enable clock domain - %p\n", clkctrl_reg);
+}
+
+static inline void wait_for_clk_enable(u32 *clkctrl_addr)
+{
+ u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
+ u32 bound = LDELAY;
+
+ while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
+ (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
+
+ clkctrl = readl(clkctrl_addr);
+ idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
+ MODULE_CLKCTRL_IDLEST_SHIFT;
+ if (--bound == 0) {
+ printf("Clock enable failed for 0x%p idlest 0x%x\n",
+ clkctrl_addr, clkctrl);
+ return;
+ }
+ }
+}
+
+static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode,
+ u32 wait_for_enable)
+{
+ clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK,
+ enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT);
+ debug("Enable clock module - %p\n", clkctrl_addr);
+ if (wait_for_enable)
+ wait_for_clk_enable(clkctrl_addr);
+}
+
+void freq_update_core(void)
+{
+ u32 freq_config1 = 0;
+ const struct dpll_params *core_dpll_params;
+
+ core_dpll_params = get_core_dpll_params();
+ /* Put EMIF clock domain in sw wakeup mode */
+ enable_clock_domain(&prcm->cm_memif_clkstctrl,
+ CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+ wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl);
+ wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl);
+
+ freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK |
+ SHADOW_FREQ_CONFIG1_DLL_RESET_MASK;
+
+ freq_config1 |= (DPLL_EN_LOCK << SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT) &
+ SHADOW_FREQ_CONFIG1_DPLL_EN_MASK;
+
+ freq_config1 |= (core_dpll_params->m2 <<
+ SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) &
+ SHADOW_FREQ_CONFIG1_M2_DIV_MASK;
+
+ writel(freq_config1, &prcm->cm_shadow_freq_config1);
+ if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0,
+ &prcm->cm_shadow_freq_config1, LDELAY)) {
+ puts("FREQ UPDATE procedure failed!!");
+ hang();
+ }
+
+ /* Put EMIF clock domain back in hw auto mode */
+ enable_clock_domain(&prcm->cm_memif_clkstctrl,
+ CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
+ wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl);
+ wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl);
+}
+
+void bypass_dpll(u32 *const base)
+{
+ do_bypass_dpll(base);
+ wait_for_bypass(base);
+}
+
+void lock_dpll(u32 *const base)
+{
+ do_lock_dpll(base);
+ wait_for_lock(base);
+}
+
+void setup_clocks_for_console(void)
+{
+ /* Do not add any spl_debug prints in this function */
+ clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+ CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
+ CD_CLKCTRL_CLKTRCTRL_SHIFT);
+
+ /* Enable all UARTs - console will be on one of them */
+ clrsetbits_le32(&prcm->cm_l4per_uart1_clkctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+ clrsetbits_le32(&prcm->cm_l4per_uart2_clkctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+ clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+ clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl,
+ MODULE_CLKCTRL_MODULEMODE_MASK,
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+
+ clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
+ CD_CLKCTRL_CLKTRCTRL_HW_AUTO <<
+ CD_CLKCTRL_CLKTRCTRL_SHIFT);
+}
+
+void setup_sri2c(void)
+{
+ u32 sys_clk_khz, cycles_hi, cycles_low, temp;
+
+ sys_clk_khz = get_sys_clk_freq() / 1000;
+
+ /*
+ * Setup the dedicated I2C controller for Voltage Control
+ * I2C clk - high period 40% low period 60%
+ */
+ cycles_hi = sys_clk_khz * 4 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
+ cycles_low = sys_clk_khz * 6 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
+ /* values to be set in register - less by 5 & 7 respectively */
+ cycles_hi -= 5;
+ cycles_low -= 7;
+ temp = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) |
+ (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
+ writel(temp, &prcm->prm_vc_cfg_i2c_clk);
+
+ /* Disable high speed mode and all advanced features */
+ writel(0x0, &prcm->prm_vc_cfg_i2c_mode);
+}
+
+void do_enable_clocks(u32 *const *clk_domains,
+ u32 *const *clk_modules_hw_auto,
+ u32 *const *clk_modules_explicit_en,
+ u8 wait_for_enable)
+{
+ u32 i, max = 100;
+
+ /* Put the clock domains in SW_WKUP mode */
+ for (i = 0; (i < max) && clk_domains[i]; i++) {
+ enable_clock_domain(clk_domains[i],
+ CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+ }
+
+ /* Clock modules that need to be put in HW_AUTO */
+ for (i = 0; (i < max) && clk_modules_hw_auto[i]; i++) {
+ enable_clock_module(clk_modules_hw_auto[i],
+ MODULE_CLKCTRL_MODULEMODE_HW_AUTO,
+ wait_for_enable);
+ };
+
+ /* Clock modules that need to be put in SW_EXPLICIT_EN mode */
+ for (i = 0; (i < max) && clk_modules_explicit_en[i]; i++) {
+ enable_clock_module(clk_modules_explicit_en[i],
+ MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
+ wait_for_enable);
+ };
+
+ /* Put the clock domains in HW_AUTO mode now */
+ for (i = 0; (i < max) && clk_domains[i]; i++) {
+ enable_clock_domain(clk_domains[i],
+ CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
+ }
+}
+
+void prcm_init(void)
+{
+ switch (omap_hw_init_context()) {
+ case OMAP_INIT_CONTEXT_SPL:
+ case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
+ case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
+ enable_basic_clocks();
+ scale_vcores();
+ setup_dplls();
+#ifdef CONFIG_SYS_CLOCKS_ENABLE_ALL
+ setup_non_essential_dplls();
+ enable_non_essential_clocks();
+#endif
+ break;
+ default:
+ break;
+ }
+
+ if (OMAP_INIT_CONTEXT_SPL != omap_hw_init_context())
+ enable_basic_uboot_clocks();
+}
diff --git a/arch/arm/cpu/armv7/omap-common/emif-common.c b/arch/arm/cpu/armv7/omap-common/emif-common.c
new file mode 100644
index 0000000..ce03b5c
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/emif-common.c
@@ -0,0 +1,1140 @@
+/*
+ * EMIF programming
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/emif.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/omap_common.h>
+#include <asm/utils.h>
+
+inline u32 emif_num(u32 base)
+{
+ if (base == EMIF1_BASE)
+ return 1;
+ else if (base == EMIF2_BASE)
+ return 2;
+ else
+ return 0;
+}
+
+
+static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
+{
+ u32 mr;
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ mr_addr |= cs << EMIF_REG_CS_SHIFT;
+ writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
+ if (omap_revision() == OMAP4430_ES2_0)
+ mr = readl(&emif->emif_lpddr2_mode_reg_data_es2);
+ else
+ mr = readl(&emif->emif_lpddr2_mode_reg_data);
+ debug("get_mr: EMIF%d cs %d mr %08x val 0x%x\n", emif_num(base),
+ cs, mr_addr, mr);
+ return mr;
+}
+
+static inline void set_mr(u32 base, u32 cs, u32 mr_addr, u32 mr_val)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ mr_addr |= cs << EMIF_REG_CS_SHIFT;
+ writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
+ writel(mr_val, &emif->emif_lpddr2_mode_reg_data);
+}
+
+void emif_reset_phy(u32 base)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+ u32 iodft;
+
+ iodft = readl(&emif->emif_iodft_tlgc);
+ iodft |= EMIF_REG_RESET_PHY_MASK;
+ writel(iodft, &emif->emif_iodft_tlgc);
+}
+
+static void do_lpddr2_init(u32 base, u32 cs)
+{
+ u32 mr_addr;
+
+ /* Wait till device auto initialization is complete */
+ while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK)
+ ;
+ set_mr(base, cs, LPDDR2_MR10, MR10_ZQ_ZQINIT);
+ /*
+ * tZQINIT = 1 us
+ * Enough loops assuming a maximum of 2GHz
+ */
+ sdelay(2000);
+ set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3);
+ set_mr(base, cs, LPDDR2_MR16, MR16_REF_FULL_ARRAY);
+ /*
+ * Enable refresh along with writing MR2
+ * Encoding of RL in MR2 is (RL - 2)
+ */
+ mr_addr = LPDDR2_MR2 | EMIF_REG_REFRESH_EN_MASK;
+ set_mr(base, cs, mr_addr, RL_FINAL - 2);
+}
+
+static void lpddr2_init(u32 base, const struct emif_regs *regs)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ /* Not NVM */
+ clrbits_le32(&emif->emif_lpddr2_nvm_config, EMIF_REG_CS1NVMEN_MASK);
+
+ /*
+ * Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM
+ * when EMIF_SDRAM_CONFIG register is written
+ */
+ setbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK);
+
+ /*
+ * Set the SDRAM_CONFIG and PHY_CTRL for the
+ * un-locked frequency & default RL
+ */
+ writel(regs->sdram_config_init, &emif->emif_sdram_config);
+ writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
+
+ do_lpddr2_init(base, CS0);
+ if (regs->sdram_config & EMIF_REG_EBANK_MASK)
+ do_lpddr2_init(base, CS1);
+
+ writel(regs->sdram_config, &emif->emif_sdram_config);
+ writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
+
+ /* Enable refresh now */
+ clrbits_le32(&emif->emif_sdram_ref_ctrl, EMIF_REG_INITREF_DIS_MASK);
+
+}
+
+void emif_update_timings(u32 base, const struct emif_regs *regs)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl_shdw);
+ writel(regs->sdram_tim1, &emif->emif_sdram_tim_1_shdw);
+ writel(regs->sdram_tim2, &emif->emif_sdram_tim_2_shdw);
+ writel(regs->sdram_tim3, &emif->emif_sdram_tim_3_shdw);
+ if (omap_revision() == OMAP4430_ES1_0) {
+ /* ES1 bug EMIF should be in force idle during freq_update */
+ writel(0, &emif->emif_pwr_mgmt_ctrl);
+ } else {
+ writel(EMIF_PWR_MGMT_CTRL, &emif->emif_pwr_mgmt_ctrl);
+ writel(EMIF_PWR_MGMT_CTRL_SHDW, &emif->emif_pwr_mgmt_ctrl_shdw);
+ }
+ writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl_shdw);
+ writel(regs->zq_config, &emif->emif_zq_config);
+ writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
+ writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
+
+ if (omap_revision() == OMAP5430_ES1_0) {
+ writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0,
+ &emif->emif_l3_config);
+ } else if (omap_revision() >= OMAP4460_ES1_0) {
+ writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0,
+ &emif->emif_l3_config);
+ } else {
+ writel(EMIF_L3_CONFIG_VAL_SYS_10_LL_0,
+ &emif->emif_l3_config);
+ }
+}
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
+
+/*
+ * Organization and refresh requirements for LPDDR2 devices of different
+ * types and densities. Derived from JESD209-2 section 2.4
+ */
+const struct lpddr2_addressing addressing_table[] = {
+ /* Banks tREFIx10 rowx32,rowx16 colx32,colx16 density */
+ {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_7, COL_8} },/*64M */
+ {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_8, COL_9} },/*128M */
+ {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_8, COL_9} },/*256M */
+ {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*512M */
+ {BANKS8, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*1GS4 */
+ {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_9, COL_10} },/*2GS4 */
+ {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_10, COL_11} },/*4G */
+ {BANKS8, T_REFI_3_9, {ROW_15, ROW_15}, {COL_10, COL_11} },/*8G */
+ {BANKS4, T_REFI_7_8, {ROW_14, ROW_14}, {COL_9, COL_10} },/*1GS2 */
+ {BANKS4, T_REFI_3_9, {ROW_15, ROW_15}, {COL_9, COL_10} },/*2GS2 */
+};
+
+static const u32 lpddr2_density_2_size_in_mbytes[] = {
+ 8, /* 64Mb */
+ 16, /* 128Mb */
+ 32, /* 256Mb */
+ 64, /* 512Mb */
+ 128, /* 1Gb */
+ 256, /* 2Gb */
+ 512, /* 4Gb */
+ 1024, /* 8Gb */
+ 2048, /* 16Gb */
+ 4096 /* 32Gb */
+};
+
+/*
+ * Calculate the period of DDR clock from frequency value and set the
+ * denominator and numerator in global variables for easy access later
+ */
+static void set_ddr_clk_period(u32 freq)
+{
+ /*
+ * period = 1/freq
+ * period_in_ns = 10^9/freq
+ */
+ *T_num = 1000000000;
+ *T_den = freq;
+ cancel_out(T_num, T_den, 200);
+
+}
+
+/*
+ * Convert time in nano seconds to number of cycles of DDR clock
+ */
+static inline u32 ns_2_cycles(u32 ns)
+{
+ return ((ns * (*T_den)) + (*T_num) - 1) / (*T_num);
+}
+
+/*
+ * ns_2_cycles with the difference that the time passed is 2 times the actual
+ * value(to avoid fractions). The cycles returned is for the original value of
+ * the timing parameter
+ */
+static inline u32 ns_x2_2_cycles(u32 ns)
+{
+ return ((ns * (*T_den)) + (*T_num) * 2 - 1) / ((*T_num) * 2);
+}
+
+/*
+ * Find addressing table index based on the device's type(S2 or S4) and
+ * density
+ */
+s8 addressing_table_index(u8 type, u8 density, u8 width)
+{
+ u8 index;
+ if ((density > LPDDR2_DENSITY_8Gb) || (width == LPDDR2_IO_WIDTH_8))
+ return -1;
+
+ /*
+ * Look at the way ADDR_TABLE_INDEX* values have been defined
+ * in emif.h compared to LPDDR2_DENSITY_* values
+ * The table is layed out in the increasing order of density
+ * (ignoring type). The exceptions 1GS2 and 2GS2 have been placed
+ * at the end
+ */
+ if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_1Gb))
+ index = ADDR_TABLE_INDEX1GS2;
+ else if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_2Gb))
+ index = ADDR_TABLE_INDEX2GS2;
+ else
+ index = density;
+
+ debug("emif: addressing table index %d\n", index);
+
+ return index;
+}
+
+/*
+ * Find the the right timing table from the array of timing
+ * tables of the device using DDR clock frequency
+ */
+static const struct lpddr2_ac_timings *get_timings_table(const struct
+ lpddr2_ac_timings const *const *device_timings,
+ u32 freq)
+{
+ u32 i, temp, freq_nearest;
+ const struct lpddr2_ac_timings *timings = 0;
+
+ emif_assert(freq <= MAX_LPDDR2_FREQ);
+ emif_assert(device_timings);
+
+ /*
+ * Start with the maximum allowed frequency - that is always safe
+ */
+ freq_nearest = MAX_LPDDR2_FREQ;
+ /*
+ * Find the timings table that has the max frequency value:
+ * i. Above or equal to the DDR frequency - safe
+ * ii. The lowest that satisfies condition (i) - optimal
+ */
+ for (i = 0; (i < MAX_NUM_SPEEDBINS) && device_timings[i]; i++) {
+ temp = device_timings[i]->max_freq;
+ if ((temp >= freq) && (temp <= freq_nearest)) {
+ freq_nearest = temp;
+ timings = device_timings[i];
+ }
+ }
+ debug("emif: timings table: %d\n", freq_nearest);
+ return timings;
+}
+
+/*
+ * Finds the value of emif_sdram_config_reg
+ * All parameters are programmed based on the device on CS0.
+ * If there is a device on CS1, it will be same as that on CS0 or
+ * it will be NVM. We don't support NVM yet.
+ * If cs1_device pointer is NULL it is assumed that there is no device
+ * on CS1
+ */
+static u32 get_sdram_config_reg(const struct lpddr2_device_details *cs0_device,
+ const struct lpddr2_device_details *cs1_device,
+ const struct lpddr2_addressing *addressing,
+ u8 RL)
+{
+ u32 config_reg = 0;
+
+ config_reg |= (cs0_device->type + 4) << EMIF_REG_SDRAM_TYPE_SHIFT;
+ config_reg |= EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING <<
+ EMIF_REG_IBANK_POS_SHIFT;
+
+ config_reg |= cs0_device->io_width << EMIF_REG_NARROW_MODE_SHIFT;
+
+ config_reg |= RL << EMIF_REG_CL_SHIFT;
+
+ config_reg |= addressing->row_sz[cs0_device->io_width] <<
+ EMIF_REG_ROWSIZE_SHIFT;
+
+ config_reg |= addressing->num_banks << EMIF_REG_IBANK_SHIFT;
+
+ config_reg |= (cs1_device ? EBANK_CS1_EN : EBANK_CS1_DIS) <<
+ EMIF_REG_EBANK_SHIFT;
+
+ config_reg |= addressing->col_sz[cs0_device->io_width] <<
+ EMIF_REG_PAGESIZE_SHIFT;
+
+ return config_reg;
+}
+
+static u32 get_sdram_ref_ctrl(u32 freq,
+ const struct lpddr2_addressing *addressing)
+{
+ u32 ref_ctrl = 0, val = 0, freq_khz;
+ freq_khz = freq / 1000;
+ /*
+ * refresh rate to be set is 'tREFI * freq in MHz
+ * division by 10000 to account for khz and x10 in t_REFI_us_x10
+ */
+ val = addressing->t_REFI_us_x10 * freq_khz / 10000;
+ ref_ctrl |= val << EMIF_REG_REFRESH_RATE_SHIFT;
+
+ return ref_ctrl;
+}
+
+static u32 get_sdram_tim_1_reg(const struct lpddr2_ac_timings *timings,
+ const struct lpddr2_min_tck *min_tck,
+ const struct lpddr2_addressing *addressing)
+{
+ u32 tim1 = 0, val = 0;
+ val = max(min_tck->tWTR, ns_x2_2_cycles(timings->tWTRx2)) - 1;
+ tim1 |= val << EMIF_REG_T_WTR_SHIFT;
+
+ if (addressing->num_banks == BANKS8)
+ val = (timings->tFAW * (*T_den) + 4 * (*T_num) - 1) /
+ (4 * (*T_num)) - 1;
+ else
+ val = max(min_tck->tRRD, ns_2_cycles(timings->tRRD)) - 1;
+
+ tim1 |= val << EMIF_REG_T_RRD_SHIFT;
+
+ val = ns_2_cycles(timings->tRASmin + timings->tRPab) - 1;
+ tim1 |= val << EMIF_REG_T_RC_SHIFT;
+
+ val = max(min_tck->tRAS_MIN, ns_2_cycles(timings->tRASmin)) - 1;
+ tim1 |= val << EMIF_REG_T_RAS_SHIFT;
+
+ val = max(min_tck->tWR, ns_2_cycles(timings->tWR)) - 1;
+ tim1 |= val << EMIF_REG_T_WR_SHIFT;
+
+ val = max(min_tck->tRCD, ns_2_cycles(timings->tRCD)) - 1;
+ tim1 |= val << EMIF_REG_T_RCD_SHIFT;
+
+ val = max(min_tck->tRP_AB, ns_2_cycles(timings->tRPab)) - 1;
+ tim1 |= val << EMIF_REG_T_RP_SHIFT;
+
+ return tim1;
+}
+
+static u32 get_sdram_tim_2_reg(const struct lpddr2_ac_timings *timings,
+ const struct lpddr2_min_tck *min_tck)
+{
+ u32 tim2 = 0, val = 0;
+ val = max(min_tck->tCKE, timings->tCKE) - 1;
+ tim2 |= val << EMIF_REG_T_CKE_SHIFT;
+
+ val = max(min_tck->tRTP, ns_x2_2_cycles(timings->tRTPx2)) - 1;
+ tim2 |= val << EMIF_REG_T_RTP_SHIFT;
+
+ /*
+ * tXSRD = tRFCab + 10 ns. XSRD and XSNR should have the
+ * same value
+ */
+ val = ns_2_cycles(timings->tXSR) - 1;
+ tim2 |= val << EMIF_REG_T_XSRD_SHIFT;
+ tim2 |= val << EMIF_REG_T_XSNR_SHIFT;
+
+ val = max(min_tck->tXP, ns_x2_2_cycles(timings->tXPx2)) - 1;
+ tim2 |= val << EMIF_REG_T_XP_SHIFT;
+
+ return tim2;
+}
+
+static u32 get_sdram_tim_3_reg(const struct lpddr2_ac_timings *timings,
+ const struct lpddr2_min_tck *min_tck,
+ const struct lpddr2_addressing *addressing)
+{
+ u32 tim3 = 0, val = 0;
+ val = min(timings->tRASmax * 10 / addressing->t_REFI_us_x10 - 1, 0xF);
+ tim3 |= val << EMIF_REG_T_RAS_MAX_SHIFT;
+
+ val = ns_2_cycles(timings->tRFCab) - 1;
+ tim3 |= val << EMIF_REG_T_RFC_SHIFT;
+
+ val = ns_x2_2_cycles(timings->tDQSCKMAXx2) - 1;
+ tim3 |= val << EMIF_REG_T_TDQSCKMAX_SHIFT;
+
+ val = ns_2_cycles(timings->tZQCS) - 1;
+ tim3 |= val << EMIF_REG_ZQ_ZQCS_SHIFT;
+
+ val = max(min_tck->tCKESR, ns_2_cycles(timings->tCKESR)) - 1;
+ tim3 |= val << EMIF_REG_T_CKESR_SHIFT;
+
+ return tim3;
+}
+
+static u32 get_zq_config_reg(const struct lpddr2_device_details *cs1_device,
+ const struct lpddr2_addressing *addressing,
+ u8 volt_ramp)
+{
+ u32 zq = 0, val = 0;
+ if (volt_ramp)
+ val =
+ EMIF_ZQCS_INTERVAL_DVFS_IN_US * 10 /
+ addressing->t_REFI_us_x10;
+ else
+ val =
+ EMIF_ZQCS_INTERVAL_NORMAL_IN_US * 10 /
+ addressing->t_REFI_us_x10;
+ zq |= val << EMIF_REG_ZQ_REFINTERVAL_SHIFT;
+
+ zq |= (REG_ZQ_ZQCL_MULT - 1) << EMIF_REG_ZQ_ZQCL_MULT_SHIFT;
+
+ zq |= (REG_ZQ_ZQINIT_MULT - 1) << EMIF_REG_ZQ_ZQINIT_MULT_SHIFT;
+
+ zq |= REG_ZQ_SFEXITEN_ENABLE << EMIF_REG_ZQ_SFEXITEN_SHIFT;
+
+ /*
+ * Assuming that two chipselects have a single calibration resistor
+ * If there are indeed two calibration resistors, then this flag should
+ * be enabled to take advantage of dual calibration feature.
+ * This data should ideally come from board files. But considering
+ * that none of the boards today have calibration resistors per CS,
+ * it would be an unnecessary overhead.
+ */
+ zq |= REG_ZQ_DUALCALEN_DISABLE << EMIF_REG_ZQ_DUALCALEN_SHIFT;
+
+ zq |= REG_ZQ_CS0EN_ENABLE << EMIF_REG_ZQ_CS0EN_SHIFT;
+
+ zq |= (cs1_device ? 1 : 0) << EMIF_REG_ZQ_CS1EN_SHIFT;
+
+ return zq;
+}
+
+static u32 get_temp_alert_config(const struct lpddr2_device_details *cs1_device,
+ const struct lpddr2_addressing *addressing,
+ u8 is_derated)
+{
+ u32 alert = 0, interval;
+ interval =
+ TEMP_ALERT_POLL_INTERVAL_MS * 10000 / addressing->t_REFI_us_x10;
+ if (is_derated)
+ interval *= 4;
+ alert |= interval << EMIF_REG_TA_REFINTERVAL_SHIFT;
+
+ alert |= TEMP_ALERT_CONFIG_DEVCT_1 << EMIF_REG_TA_DEVCNT_SHIFT;
+
+ alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << EMIF_REG_TA_DEVWDT_SHIFT;
+
+ alert |= 1 << EMIF_REG_TA_SFEXITEN_SHIFT;
+
+ alert |= 1 << EMIF_REG_TA_CS0EN_SHIFT;
+
+ alert |= (cs1_device ? 1 : 0) << EMIF_REG_TA_CS1EN_SHIFT;
+
+ return alert;
+}
+
+static u32 get_read_idle_ctrl_reg(u8 volt_ramp)
+{
+ u32 idle = 0, val = 0;
+ if (volt_ramp)
+ val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 - 1;
+ else
+ /*Maximum value in normal conditions - suggested by hw team */
+ val = 0x1FF;
+ idle |= val << EMIF_REG_READ_IDLE_INTERVAL_SHIFT;
+
+ idle |= EMIF_REG_READ_IDLE_LEN_VAL << EMIF_REG_READ_IDLE_LEN_SHIFT;
+
+ return idle;
+}
+
+static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL)
+{
+ u32 phy = 0, val = 0;
+
+ phy |= (RL + 2) << EMIF_REG_READ_LATENCY_SHIFT;
+
+ if (freq <= 100000000)
+ val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS;
+ else if (freq <= 200000000)
+ val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ;
+ else
+ val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ;
+ phy |= val << EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT;
+
+ /* Other fields are constant magic values. Hardcode them together */
+ phy |= EMIF_DDR_PHY_CTRL_1_BASE_VAL <<
+ EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT;
+
+ return phy;
+}
+
+static u32 get_emif_mem_size(struct emif_device_details *devices)
+{
+ u32 size_mbytes = 0, temp;
+
+ if (!devices)
+ return 0;
+
+ if (devices->cs0_device_details) {
+ temp = devices->cs0_device_details->density;
+ size_mbytes += lpddr2_density_2_size_in_mbytes[temp];
+ }
+
+ if (devices->cs1_device_details) {
+ temp = devices->cs1_device_details->density;
+ size_mbytes += lpddr2_density_2_size_in_mbytes[temp];
+ }
+ /* convert to bytes */
+ return size_mbytes << 20;
+}
+
+/* Gets the encoding corresponding to a given DMM section size */
+u32 get_dmm_section_size_map(u32 section_size)
+{
+ /*
+ * Section size mapping:
+ * 0x0: 16-MiB section
+ * 0x1: 32-MiB section
+ * 0x2: 64-MiB section
+ * 0x3: 128-MiB section
+ * 0x4: 256-MiB section
+ * 0x5: 512-MiB section
+ * 0x6: 1-GiB section
+ * 0x7: 2-GiB section
+ */
+ section_size >>= 24; /* divide by 16 MB */
+ return log_2_n_round_down(section_size);
+}
+
+static void emif_calculate_regs(
+ const struct emif_device_details *emif_dev_details,
+ u32 freq, struct emif_regs *regs)
+{
+ u32 temp, sys_freq;
+ const struct lpddr2_addressing *addressing;
+ const struct lpddr2_ac_timings *timings;
+ const struct lpddr2_min_tck *min_tck;
+ const struct lpddr2_device_details *cs0_dev_details =
+ emif_dev_details->cs0_device_details;
+ const struct lpddr2_device_details *cs1_dev_details =
+ emif_dev_details->cs1_device_details;
+ const struct lpddr2_device_timings *cs0_dev_timings =
+ emif_dev_details->cs0_device_timings;
+
+ emif_assert(emif_dev_details);
+ emif_assert(regs);
+ /*
+ * You can not have a device on CS1 without one on CS0
+ * So configuring EMIF without a device on CS0 doesn't
+ * make sense
+ */
+ emif_assert(cs0_dev_details);
+ emif_assert(cs0_dev_details->type != LPDDR2_TYPE_NVM);
+ /*
+ * If there is a device on CS1 it should be same type as CS0
+ * (or NVM. But NVM is not supported in this driver yet)
+ */
+ emif_assert((cs1_dev_details == NULL) ||
+ (cs1_dev_details->type == LPDDR2_TYPE_NVM) ||
+ (cs0_dev_details->type == cs1_dev_details->type));
+ emif_assert(freq <= MAX_LPDDR2_FREQ);
+
+ set_ddr_clk_period(freq);
+
+ /*
+ * The device on CS0 is used for all timing calculations
+ * There is only one set of registers for timings per EMIF. So, if the
+ * second CS(CS1) has a device, it should have the same timings as the
+ * device on CS0
+ */
+ timings = get_timings_table(cs0_dev_timings->ac_timings, freq);
+ emif_assert(timings);
+ min_tck = cs0_dev_timings->min_tck;
+
+ temp = addressing_table_index(cs0_dev_details->type,
+ cs0_dev_details->density,
+ cs0_dev_details->io_width);
+
+ emif_assert((temp >= 0));
+ addressing = &(addressing_table[temp]);
+ emif_assert(addressing);
+
+ sys_freq = get_sys_clk_freq();
+
+ regs->sdram_config_init = get_sdram_config_reg(cs0_dev_details,
+ cs1_dev_details,
+ addressing, RL_BOOT);
+
+ regs->sdram_config = get_sdram_config_reg(cs0_dev_details,
+ cs1_dev_details,
+ addressing, RL_FINAL);
+
+ regs->ref_ctrl = get_sdram_ref_ctrl(freq, addressing);
+
+ regs->sdram_tim1 = get_sdram_tim_1_reg(timings, min_tck, addressing);
+
+ regs->sdram_tim2 = get_sdram_tim_2_reg(timings, min_tck);
+
+ regs->sdram_tim3 = get_sdram_tim_3_reg(timings, min_tck, addressing);
+
+ regs->read_idle_ctrl = get_read_idle_ctrl_reg(LPDDR2_VOLTAGE_STABLE);
+
+ regs->temp_alert_config =
+ get_temp_alert_config(cs1_dev_details, addressing, 0);
+
+ regs->zq_config = get_zq_config_reg(cs1_dev_details, addressing,
+ LPDDR2_VOLTAGE_STABLE);
+
+ regs->emif_ddr_phy_ctlr_1_init =
+ get_ddr_phy_ctrl_1(sys_freq / 2, RL_BOOT);
+
+ regs->emif_ddr_phy_ctlr_1 =
+ get_ddr_phy_ctrl_1(freq, RL_FINAL);
+
+ regs->freq = freq;
+
+ print_timing_reg(regs->sdram_config_init);
+ print_timing_reg(regs->sdram_config);
+ print_timing_reg(regs->ref_ctrl);
+ print_timing_reg(regs->sdram_tim1);
+ print_timing_reg(regs->sdram_tim2);
+ print_timing_reg(regs->sdram_tim3);
+ print_timing_reg(regs->read_idle_ctrl);
+ print_timing_reg(regs->temp_alert_config);
+ print_timing_reg(regs->zq_config);
+ print_timing_reg(regs->emif_ddr_phy_ctlr_1);
+ print_timing_reg(regs->emif_ddr_phy_ctlr_1_init);
+}
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
+#ifdef CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+const char *get_lpddr2_type(u8 type_id)
+{
+ switch (type_id) {
+ case LPDDR2_TYPE_S4:
+ return "LPDDR2-S4";
+ case LPDDR2_TYPE_S2:
+ return "LPDDR2-S2";
+ default:
+ return NULL;
+ }
+}
+
+const char *get_lpddr2_io_width(u8 width_id)
+{
+ switch (width_id) {
+ case LPDDR2_IO_WIDTH_8:
+ return "x8";
+ case LPDDR2_IO_WIDTH_16:
+ return "x16";
+ case LPDDR2_IO_WIDTH_32:
+ return "x32";
+ default:
+ return NULL;
+ }
+}
+
+const char *get_lpddr2_manufacturer(u32 manufacturer)
+{
+ switch (manufacturer) {
+ case LPDDR2_MANUFACTURER_SAMSUNG:
+ return "Samsung";
+ case LPDDR2_MANUFACTURER_QIMONDA:
+ return "Qimonda";
+ case LPDDR2_MANUFACTURER_ELPIDA:
+ return "Elpida";
+ case LPDDR2_MANUFACTURER_ETRON:
+ return "Etron";
+ case LPDDR2_MANUFACTURER_NANYA:
+ return "Nanya";
+ case LPDDR2_MANUFACTURER_HYNIX:
+ return "Hynix";
+ case LPDDR2_MANUFACTURER_MOSEL:
+ return "Mosel";
+ case LPDDR2_MANUFACTURER_WINBOND:
+ return "Winbond";
+ case LPDDR2_MANUFACTURER_ESMT:
+ return "ESMT";
+ case LPDDR2_MANUFACTURER_SPANSION:
+ return "Spansion";
+ case LPDDR2_MANUFACTURER_SST:
+ return "SST";
+ case LPDDR2_MANUFACTURER_ZMOS:
+ return "ZMOS";
+ case LPDDR2_MANUFACTURER_INTEL:
+ return "Intel";
+ case LPDDR2_MANUFACTURER_NUMONYX:
+ return "Numonyx";
+ case LPDDR2_MANUFACTURER_MICRON:
+ return "Micron";
+ default:
+ return NULL;
+ }
+}
+
+static void display_sdram_details(u32 emif_nr, u32 cs,
+ struct lpddr2_device_details *device)
+{
+ const char *mfg_str;
+ const char *type_str;
+ char density_str[10];
+ u32 density;
+
+ debug("EMIF%d CS%d\t", emif_nr, cs);
+
+ if (!device) {
+ debug("None\n");
+ return;
+ }
+
+ mfg_str = get_lpddr2_manufacturer(device->manufacturer);
+ type_str = get_lpddr2_type(device->type);
+
+ density = lpddr2_density_2_size_in_mbytes[device->density];
+ if ((density / 1024 * 1024) == density) {
+ density /= 1024;
+ sprintf(density_str, "%d GB", density);
+ } else
+ sprintf(density_str, "%d MB", density);
+ if (mfg_str && type_str)
+ debug("%s\t\t%s\t%s\n", mfg_str, type_str, density_str);
+}
+
+static u8 is_lpddr2_sdram_present(u32 base, u32 cs,
+ struct lpddr2_device_details *lpddr2_device)
+{
+ u32 mr = 0, temp;
+
+ mr = get_mr(base, cs, LPDDR2_MR0);
+ if (mr > 0xFF) {
+ /* Mode register value bigger than 8 bit */
+ return 0;
+ }
+
+ temp = (mr & LPDDR2_MR0_DI_MASK) >> LPDDR2_MR0_DI_SHIFT;
+ if (temp) {
+ /* Not SDRAM */
+ return 0;
+ }
+ temp = (mr & LPDDR2_MR0_DNVI_MASK) >> LPDDR2_MR0_DNVI_SHIFT;
+
+ if (temp) {
+ /* DNV supported - But DNV is only supported for NVM */
+ return 0;
+ }
+
+ mr = get_mr(base, cs, LPDDR2_MR4);
+ if (mr > 0xFF) {
+ /* Mode register value bigger than 8 bit */
+ return 0;
+ }
+
+ mr = get_mr(base, cs, LPDDR2_MR5);
+ if (mr >= 0xFF) {
+ /* Mode register value bigger than 8 bit */
+ return 0;
+ }
+
+ if (!get_lpddr2_manufacturer(mr)) {
+ /* Manufacturer not identified */
+ return 0;
+ }
+ lpddr2_device->manufacturer = mr;
+
+ mr = get_mr(base, cs, LPDDR2_MR6);
+ if (mr >= 0xFF) {
+ /* Mode register value bigger than 8 bit */
+ return 0;
+ }
+
+ mr = get_mr(base, cs, LPDDR2_MR7);
+ if (mr >= 0xFF) {
+ /* Mode register value bigger than 8 bit */
+ return 0;
+ }
+
+ mr = get_mr(base, cs, LPDDR2_MR8);
+ if (mr >= 0xFF) {
+ /* Mode register value bigger than 8 bit */
+ return 0;
+ }
+
+ temp = (mr & MR8_TYPE_MASK) >> MR8_TYPE_SHIFT;
+ if (!get_lpddr2_type(temp)) {
+ /* Not SDRAM */
+ return 0;
+ }
+ lpddr2_device->type = temp;
+
+ temp = (mr & MR8_DENSITY_MASK) >> MR8_DENSITY_SHIFT;
+ if (temp > LPDDR2_DENSITY_32Gb) {
+ /* Density not supported */
+ return 0;
+ }
+ lpddr2_device->density = temp;
+
+ temp = (mr & MR8_IO_WIDTH_MASK) >> MR8_IO_WIDTH_SHIFT;
+ if (!get_lpddr2_io_width(temp)) {
+ /* IO width unsupported value */
+ return 0;
+ }
+ lpddr2_device->io_width = temp;
+
+ /*
+ * If all the above tests pass we should
+ * have a device on this chip-select
+ */
+ return 1;
+}
+
+struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
+ struct lpddr2_device_details *lpddr2_dev_details)
+{
+ u32 phy;
+ u32 base = (emif_nr == 1) ? EMIF1_BASE : EMIF2_BASE;
+
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+
+ if (!lpddr2_dev_details)
+ return NULL;
+
+ /* Do the minimum init for mode register accesses */
+ if (!running_from_sdram()) {
+ phy = get_ddr_phy_ctrl_1(get_sys_clk_freq() / 2, RL_BOOT);
+ writel(phy, &emif->emif_ddr_phy_ctrl_1);
+ }
+
+ if (!(is_lpddr2_sdram_present(base, cs, lpddr2_dev_details)))
+ return NULL;
+
+ display_sdram_details(emif_num(base), cs, lpddr2_dev_details);
+
+ return lpddr2_dev_details;
+}
+#endif /* CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION */
+
+static void do_sdram_init(u32 base)
+{
+ const struct emif_regs *regs;
+ u32 in_sdram, emif_nr;
+
+ debug(">>do_sdram_init() %x\n", base);
+
+ in_sdram = running_from_sdram();
+ emif_nr = (base == EMIF1_BASE) ? 1 : 2;
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+ emif_get_reg_dump(emif_nr, &regs);
+ if (!regs) {
+ debug("EMIF: reg dump not provided\n");
+ return;
+ }
+#else
+ /*
+ * The user has not provided the register values. We need to
+ * calculate it based on the timings and the DDR frequency
+ */
+ struct emif_device_details dev_details;
+ struct emif_regs calculated_regs;
+
+ /*
+ * Get device details:
+ * - Discovered if CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION is set
+ * - Obtained from user otherwise
+ */
+ struct lpddr2_device_details cs0_dev_details, cs1_dev_details;
+ emif_reset_phy(base);
+ dev_details.cs0_device_details = emif_get_device_details(base, CS0,
+ &cs0_dev_details);
+ dev_details.cs1_device_details = emif_get_device_details(base, CS1,
+ &cs1_dev_details);
+ emif_reset_phy(base);
+
+ /* Return if no devices on this EMIF */
+ if (!dev_details.cs0_device_details &&
+ !dev_details.cs1_device_details) {
+ emif_sizes[emif_nr - 1] = 0;
+ return;
+ }
+
+ if (!in_sdram)
+ emif_sizes[emif_nr - 1] = get_emif_mem_size(&dev_details);
+
+ /*
+ * Get device timings:
+ * - Default timings specified by JESD209-2 if
+ * CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS is set
+ * - Obtained from user otherwise
+ */
+ emif_get_device_timings(emif_nr, &dev_details.cs0_device_timings,
+ &dev_details.cs1_device_timings);
+
+ /* Calculate the register values */
+ emif_calculate_regs(&dev_details, omap_ddr_clk(), &calculated_regs);
+ regs = &calculated_regs;
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
+ /*
+ * Initializing the LPDDR2 device can not happen from SDRAM.
+ * Changing the timing registers in EMIF can happen(going from one
+ * OPP to another)
+ */
+ if (!in_sdram)
+ lpddr2_init(base, regs);
+
+ /* Write to the shadow registers */
+ emif_update_timings(base, regs);
+
+ debug("<<do_sdram_init() %x\n", base);
+}
+
+void emif_post_init_config(u32 base)
+{
+ struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
+ u32 omap_rev = omap_revision();
+
+ if (omap_rev == OMAP5430_ES1_0)
+ return;
+
+ /* reset phy on ES2.0 */
+ if (omap_rev == OMAP4430_ES2_0)
+ emif_reset_phy(base);
+
+ /* Put EMIF back in smart idle on ES1.0 */
+ if (omap_rev == OMAP4430_ES1_0)
+ writel(0x80000000, &emif->emif_pwr_mgmt_ctrl);
+}
+
+void dmm_init(u32 base)
+{
+ const struct dmm_lisa_map_regs *lisa_map_regs;
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+ emif_get_dmm_regs(&lisa_map_regs);
+#else
+ u32 emif1_size, emif2_size, mapped_size, section_map = 0;
+ u32 section_cnt, sys_addr;
+ struct dmm_lisa_map_regs lis_map_regs_calculated = {0};
+
+ mapped_size = 0;
+ section_cnt = 3;
+ sys_addr = CONFIG_SYS_SDRAM_BASE;
+ emif1_size = emif_sizes[0];
+ emif2_size = emif_sizes[1];
+ debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size);
+
+ if (!emif1_size && !emif2_size)
+ return;
+
+ /* symmetric interleaved section */
+ if (emif1_size && emif2_size) {
+ mapped_size = min(emif1_size, emif2_size);
+ section_map = DMM_LISA_MAP_INTERLEAVED_BASE_VAL;
+ section_map |= 0 << EMIF_SDRC_ADDR_SHIFT;
+ /* only MSB */
+ section_map |= (sys_addr >> 24) <<
+ EMIF_SYS_ADDR_SHIFT;
+ section_map |= get_dmm_section_size_map(mapped_size * 2)
+ << EMIF_SYS_SIZE_SHIFT;
+ lis_map_regs_calculated.dmm_lisa_map_3 = section_map;
+ emif1_size -= mapped_size;
+ emif2_size -= mapped_size;
+ sys_addr += (mapped_size * 2);
+ section_cnt--;
+ }
+
+ /*
+ * Single EMIF section(we can have a maximum of 1 single EMIF
+ * section- either EMIF1 or EMIF2 or none, but not both)
+ */
+ if (emif1_size) {
+ section_map = DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL;
+ section_map |= get_dmm_section_size_map(emif1_size)
+ << EMIF_SYS_SIZE_SHIFT;
+ /* only MSB */
+ section_map |= (mapped_size >> 24) <<
+ EMIF_SDRC_ADDR_SHIFT;
+ /* only MSB */
+ section_map |= (sys_addr >> 24) << EMIF_SYS_ADDR_SHIFT;
+ section_cnt--;
+ }
+ if (emif2_size) {
+ section_map = DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL;
+ section_map |= get_dmm_section_size_map(emif2_size) <<
+ EMIF_SYS_SIZE_SHIFT;
+ /* only MSB */
+ section_map |= mapped_size >> 24 << EMIF_SDRC_ADDR_SHIFT;
+ /* only MSB */
+ section_map |= sys_addr >> 24 << EMIF_SYS_ADDR_SHIFT;
+ section_cnt--;
+ }
+
+ if (section_cnt == 2) {
+ /* Only 1 section - either symmetric or single EMIF */
+ lis_map_regs_calculated.dmm_lisa_map_3 = section_map;
+ lis_map_regs_calculated.dmm_lisa_map_2 = 0;
+ lis_map_regs_calculated.dmm_lisa_map_1 = 0;
+ } else {
+ /* 2 sections - 1 symmetric, 1 single EMIF */
+ lis_map_regs_calculated.dmm_lisa_map_2 = section_map;
+ lis_map_regs_calculated.dmm_lisa_map_1 = 0;
+ }
+
+ /* TRAP for invalid TILER mappings in section 0 */
+ lis_map_regs_calculated.dmm_lisa_map_0 = DMM_LISA_MAP_0_INVAL_ADDR_TRAP;
+
+ lisa_map_regs = &lis_map_regs_calculated;
+#endif
+ struct dmm_lisa_map_regs *hw_lisa_map_regs =
+ (struct dmm_lisa_map_regs *)base;
+
+ writel(0, &hw_lisa_map_regs->dmm_lisa_map_3);
+ writel(0, &hw_lisa_map_regs->dmm_lisa_map_2);
+ writel(0, &hw_lisa_map_regs->dmm_lisa_map_1);
+ writel(0, &hw_lisa_map_regs->dmm_lisa_map_0);
+
+ writel(lisa_map_regs->dmm_lisa_map_3,
+ &hw_lisa_map_regs->dmm_lisa_map_3);
+ writel(lisa_map_regs->dmm_lisa_map_2,
+ &hw_lisa_map_regs->dmm_lisa_map_2);
+ writel(lisa_map_regs->dmm_lisa_map_1,
+ &hw_lisa_map_regs->dmm_lisa_map_1);
+ writel(lisa_map_regs->dmm_lisa_map_0,
+ &hw_lisa_map_regs->dmm_lisa_map_0);
+
+ if (omap_revision() >= OMAP4460_ES1_0) {
+ hw_lisa_map_regs =
+ (struct dmm_lisa_map_regs *)MA_BASE;
+
+ writel(lisa_map_regs->dmm_lisa_map_3,
+ &hw_lisa_map_regs->dmm_lisa_map_3);
+ writel(lisa_map_regs->dmm_lisa_map_2,
+ &hw_lisa_map_regs->dmm_lisa_map_2);
+ writel(lisa_map_regs->dmm_lisa_map_1,
+ &hw_lisa_map_regs->dmm_lisa_map_1);
+ writel(lisa_map_regs->dmm_lisa_map_0,
+ &hw_lisa_map_regs->dmm_lisa_map_0);
+ }
+}
+
+/*
+ * SDRAM initialization:
+ * SDRAM initialization has two parts:
+ * 1. Configuring the SDRAM device
+ * 2. Update the AC timings related parameters in the EMIF module
+ * (1) should be done only once and should not be done while we are
+ * running from SDRAM.
+ * (2) can and should be done more than once if OPP changes.
+ * Particularly, this may be needed when we boot without SPL and
+ * and using Configuration Header(CH). ROM code supports only at 50% OPP
+ * at boot (low power boot). So u-boot has to switch to OPP100 and update
+ * the frequency. So,
+ * Doing (1) and (2) makes sense - first time initialization
+ * Doing (2) and not (1) makes sense - OPP change (when using CH)
+ * Doing (1) and not (2) doen't make sense
+ * See do_sdram_init() for the details
+ */
+void sdram_init(void)
+{
+ u32 in_sdram, size_prog, size_detect;
+
+ debug(">>sdram_init()\n");
+
+ if (omap_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
+ return;
+
+ in_sdram = running_from_sdram();
+ debug("in_sdram = %d\n", in_sdram);
+
+ if (!in_sdram)
+ bypass_dpll(&prcm->cm_clkmode_dpll_core);
+
+
+ do_sdram_init(EMIF1_BASE);
+ do_sdram_init(EMIF2_BASE);
+
+ if (!in_sdram) {
+ dmm_init(DMM_BASE);
+ emif_post_init_config(EMIF1_BASE);
+ emif_post_init_config(EMIF2_BASE);
+ }
+
+ /* for the shadow registers to take effect */
+ freq_update_core();
+
+ /* Do some testing after the init */
+ if (!in_sdram) {
+ size_prog = omap_sdram_size();
+ size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+ size_prog);
+ /* Compare with the size programmed */
+ if (size_detect != size_prog) {
+ printf("SDRAM: identified size not same as expected"
+ " size identified: %x expected: %x\n",
+ size_detect,
+ size_prog);
+ } else
+ debug("get_ram_size() successful");
+ }
+
+ debug("<<sdram_init()\n");
+}
diff --git a/arch/arm/cpu/armv7/omap-common/hwinit-common.c b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
new file mode 100644
index 0000000..f65705d
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap-common/hwinit-common.c
@@ -0,0 +1,267 @@
+/*
+ *
+ * Common functions for OMAP4/5 based boards
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ * Aneesh V <aneesh@ti.com>
+ * Steve Sakoman <steve@sakoman.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/sizes.h>
+#include <asm/emif.h>
+#include <asm/omap_common.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * This is used to verify if the configuration header
+ * was executed by rom code prior to control of transfer
+ * to the bootloader. SPL is responsible for saving and
+ * passing the boot_params pointer to the u-boot.
+ */
+struct omap_boot_parameters boot_params __attribute__ ((section(".data")));
+
+#ifdef CONFIG_SPL_BUILD
+/*
+ * We use static variables because global data is not ready yet.
+ * Initialized data is available in SPL right from the beginning.
+ * We would not typically need to save these parameters in regular
+ * U-Boot. This is needed only in SPL at the moment.
+ */
+u32 omap_bootmode = MMCSD_MODE_FAT;
+
+u32 omap_boot_device(void)
+{
+ return (u32) (boot_params.omap_bootdevice);
+}
+
+u32 omap_boot_mode(void)
+{
+ return omap_bootmode;
+}
+#endif
+
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
+{
+ int i;
+ struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
+
+ for (i = 0; i < size; i++, pad++)
+ writew(pad->val, base + pad->offset);
+}
+
+static void set_mux_conf_regs(void)
+{
+ switch (omap_hw_init_context()) {
+ case OMAP_INIT_CONTEXT_SPL:
+ set_muxconf_regs_essential();
+ break;
+ case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL:
+#ifdef CONFIG_SYS_ENABLE_PADS_ALL
+ set_muxconf_regs_non_essential();
+#endif
+ break;
+ case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
+ case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
+ set_muxconf_regs_essential();
+#ifdef CONFIG_SYS_ENABLE_PADS_ALL
+ set_muxconf_regs_non_essential();
+#endif
+ break;
+ }
+}
+
+u32 cortex_rev(void)
+{
+
+ unsigned int rev;
+
+ /* Read Main ID Register (MIDR) */
+ asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev));
+
+ return rev;
+}
+
+void omap_rev_string(char *omap_rev_string)
+{
+ u32 omap_rev = omap_revision();
+ u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16;
+ u32 major_rev = (omap_rev & 0x00000F00) >> 8;
+ u32 minor_rev = (omap_rev & 0x000000F0) >> 4;
+
+ sprintf(omap_rev_string, "OMAP%x ES%x.%x", omap_variant, major_rev,
+ minor_rev);
+}
+
+#ifdef CONFIG_SPL_BUILD
+static void init_boot_params(void)
+{
+ boot_params_ptr = (u32 *) &boot_params;
+}
+#endif
+
+/*
+ * Routine: s_init
+ * Description: Does early system init of watchdog, muxing, andclocks
+ * Watchdog disable is done always. For the rest what gets done
+ * depends on the boot mode in which this function is executed
+ * 1. s_init of SPL running from SRAM
+ * 2. s_init of U-Boot running from FLASH
+ * 3. s_init of U-Boot loaded to SDRAM by SPL
+ * 4. s_init of U-Boot loaded to SDRAM by ROM code using the
+ * Configuration Header feature
+ * Please have a look at the respective functions to see what gets
+ * done in each of these cases
+ * This function is called with SRAM stack.
+ */
+void s_init(void)
+{
+ init_omap_revision();
+ watchdog_init();
+ set_mux_conf_regs();
+#ifdef CONFIG_SPL_BUILD
+ setup_clocks_for_console();
+ preloader_console_init();
+ do_io_settings();
+#endif
+ prcm_init();
+#ifdef CONFIG_SPL_BUILD
+ /* For regular u-boot sdram_init() is called from dram_init() */
+ sdram_init();
+ init_boot_params();
+#endif
+}
+
+/*
+ * Routine: wait_for_command_complete
+ * Description: Wait for posting to finish on watchdog
+ */
+void wait_for_command_complete(struct watchdog *wd_base)
+{
+ int pending = 1;
+ do {
+ pending = readl(&wd_base->wwps);
+ } while (pending);
+}
+
+/*
+ * Routine: watchdog_init
+ * Description: Shut down watch dogs
+ */
+void watchdog_init(void)
+{
+ struct watchdog *wd2_base = (struct watchdog *)WDT2_BASE;
+
+ writel(WD_UNLOCK1, &wd2_base->wspr);
+ wait_for_command_complete(wd2_base);
+ writel(WD_UNLOCK2, &wd2_base->wspr);
+}
+
+
+/*
+ * This function finds the SDRAM size available in the system
+ * based on DMM section configurations
+ * This is needed because the size of memory installed may be
+ * different on different versions of the board
+ */
+u32 omap_sdram_size(void)
+{
+ u32 section, i, total_size = 0, size, addr;
+
+ for (i = 0; i < 4; i++) {
+ section = __raw_readl(DMM_BASE + i*4);
+ addr = section & EMIF_SYS_ADDR_MASK;
+ /* See if the address is valid */
+ if ((addr >= DRAM_ADDR_SPACE_START) &&
+ (addr < DRAM_ADDR_SPACE_END)) {
+ size = ((section & EMIF_SYS_SIZE_MASK) >>
+ EMIF_SYS_SIZE_SHIFT);
+ size = 1 << size;
+ size *= SZ_16M;
+ total_size += size;
+ }
+ }
+
+ return total_size;
+}
+
+
+/*
+ * Routine: dram_init
+ * Description: sets uboots idea of sdram size
+ */
+int dram_init(void)
+{
+ sdram_init();
+ gd->ram_size = omap_sdram_size();
+ return 0;
+}
+
+/*
+ * Print board information
+ */
+int checkboard(void)
+{
+ puts(sysinfo.board_string);
+ return 0;
+}
+
+/*
+* This function is called by start_armboot. You can reliably use static
+* data. Any boot-time function that require static data should be
+* called from here
+*/
+int arch_cpu_init(void)
+{
+ return 0;
+}
+
+/*
+ * get_device_type(): tell if GP/HS/EMU/TST
+ */
+u32 get_device_type(void)
+{
+ return 0;
+}
+
+/*
+ * Print CPU information
+ */
+int print_cpuinfo(void)
+{
+ char rev_string_buffer[50];
+
+ omap_rev_string(rev_string_buffer);
+ printf("CPU : %s\n", rev_string_buffer);
+
+ return 0;
+}
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ /* Enable D-cache. I-cache is already enabled in start.S */
+ dcache_enable();
+}
+#endif
diff --git a/arch/arm/cpu/armv7/omap4/lowlevel_init.S b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
index 91525ec..35f38ac 100644
--- a/arch/arm/cpu/armv7/omap4/lowlevel_init.S
+++ b/arch/arm/cpu/armv7/omap-common/lowlevel_init.S
@@ -26,8 +26,8 @@
* MA 02111-1307 USA
*/
-#include <asm/arch/omap4.h>
-#ifdef CONFIG_SPL_BUILD
+#include <asm/arch/omap.h>
+
.global save_boot_params
save_boot_params:
/*
@@ -43,21 +43,40 @@ save_boot_params:
cmp r2, r0
blt 1f
- /* Store the boot device in omap4_boot_device */
- ldr r2, [r0, #BOOT_DEVICE_OFFSET] @ r1 <- value of boot device
+ /*
+ * store the boot params passed from rom code or saved
+ * and passed by SPL
+ */
+ cmp r0, #0
+ beq 1f
+ ldr r1, =boot_params
+ str r0, [r1]
+#ifdef CONFIG_SPL_BUILD
+ /* Store the boot device in omap_boot_device */
+ ldrb r2, [r0, #BOOT_DEVICE_OFFSET] @ r1 <- value of boot device
and r2, #BOOT_DEVICE_MASK
- ldr r3, =omap4_boot_device
- str r2, [r3] @ omap4_boot_device <- r1
+ ldr r3, =boot_params
+ strb r2, [r3, #BOOT_DEVICE_OFFSET] @ omap_boot_device <- r1
- /* Store the boot mode (raw/FAT) in omap4_boot_mode */
+ /* boot mode is passed only for devices that can raw/fat mode */
+ cmp r2, #2
+ blt 2f
+ cmp r2, #7
+ bgt 2f
+ /* Store the boot mode (raw/FAT) in omap_boot_mode */
ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr
ldr r2, [r2, #DEV_DATA_PTR_OFFSET] @ get the pDeviceData ptr
ldr r2, [r2, #BOOT_MODE_OFFSET] @ get the boot mode
- ldr r3, =omap4_boot_mode
+ ldr r3, =omap_bootmode
str r2, [r3]
+#endif
+2:
+ ldrb r2, [r0, #CH_FLAGS_OFFSET]
+ ldr r3, =boot_params
+ strb r2, [r3, #CH_FLAGS_OFFSET]
1:
bx lr
-#endif
+
.globl lowlevel_init
lowlevel_init:
diff --git a/arch/arm/cpu/armv7/omap4/mem.c b/arch/arm/cpu/armv7/omap-common/mem-common.c
index 878f0e3..878f0e3 100644
--- a/arch/arm/cpu/armv7/omap4/mem.c
+++ b/arch/arm/cpu/armv7/omap-common/mem-common.c
diff --git a/arch/arm/cpu/armv7/omap-common/spl.c b/arch/arm/cpu/armv7/omap-common/spl.c
index 2c59d2b..d6d7d65 100644
--- a/arch/arm/cpu/armv7/omap-common/spl.c
+++ b/arch/arm/cpu/armv7/omap-common/spl.c
@@ -38,6 +38,7 @@
DECLARE_GLOBAL_DATA_PTR;
+u32* boot_params_ptr = NULL;
struct spl_image_info spl_image;
/* Define global data structure pointer to it*/
@@ -92,12 +93,16 @@ void spl_parse_image_header(const struct image_header *header)
static void jump_to_image_no_args(void)
{
- typedef void (*image_entry_noargs_t)(void)__attribute__ ((noreturn));
+ typedef void (*image_entry_noargs_t)(u32 *)__attribute__ ((noreturn));
image_entry_noargs_t image_entry =
(image_entry_noargs_t) spl_image.entry_point;
debug("image entry point: 0x%X\n", spl_image.entry_point);
- image_entry();
+ /* Pass the saved boot_params from rom code */
+#if defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU)
+ image_entry = 0x80100000;
+#endif
+ image_entry((u32 *)&boot_params_ptr);
}
void jump_to_image_no_args(void) __attribute__ ((noreturn));
diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile
index e7ee0b8..83160a2 100644
--- a/arch/arm/cpu/armv7/omap4/Makefile
+++ b/arch/arm/cpu/armv7/omap4/Makefile
@@ -25,17 +25,10 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(SOC).o
-SOBJS += lowlevel_init.o
-
-COBJS += board.o
+COBJS += sdram_elpida.o
+COBJS += hwinit.o
COBJS += clocks.o
COBJS += emif.o
-COBJS += sdram_elpida.o
-
-ifndef CONFIG_SPL_BUILD
-COBJS += mem.o
-COBJS += sys_info.o
-endif
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
deleted file mode 100644
index 2497e3e..0000000
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- *
- * Common functions for OMAP4 based boards
- *
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
- *
- * Author :
- * Aneesh V <aneesh@ti.com>
- * Steve Sakoman <steve@sakoman.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <asm/armv7.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/sizes.h>
-#include <asm/arch/emif.h>
-#include <asm/arch/gpio.h>
-#include "omap4_mux_data.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-u32 *const omap4_revision = (u32 *)OMAP4_SRAM_SCRATCH_OMAP4_REV;
-
-static const struct gpio_bank gpio_bank_44xx[6] = {
- { (void *)OMAP44XX_GPIO1_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP44XX_GPIO2_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP44XX_GPIO3_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP44XX_GPIO4_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP44XX_GPIO5_BASE, METHOD_GPIO_24XX },
- { (void *)OMAP44XX_GPIO6_BASE, METHOD_GPIO_24XX },
-};
-
-const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx;
-
-#ifdef CONFIG_SPL_BUILD
-/*
- * We use static variables because global data is not ready yet.
- * Initialized data is available in SPL right from the beginning.
- * We would not typically need to save these parameters in regular
- * U-Boot. This is needed only in SPL at the moment.
- */
-u32 omap4_boot_device = BOOT_DEVICE_MMC1;
-u32 omap4_boot_mode = MMCSD_MODE_FAT;
-
-u32 omap_boot_device(void)
-{
- return omap4_boot_device;
-}
-
-u32 omap_boot_mode(void)
-{
- return omap4_boot_mode;
-}
-
-/*
- * Some tuning of IOs for optimal power and performance
- */
-static void do_io_settings(void)
-{
- u32 lpddr2io;
- struct control_lpddr2io_regs *lpddr2io_regs =
- (struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE;
- struct omap4_sys_ctrl_regs *const ctrl =
- (struct omap4_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE;
-
- u32 omap4_rev = omap_revision();
-
- if (omap4_rev == OMAP4430_ES1_0)
- lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN;
- else if (omap4_rev == OMAP4430_ES2_0)
- lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER;
- else
- lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN;
-
- /* EMIF1 */
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0);
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1);
- /* No pull for GR10 as per hw team's recommendation */
- writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
- &lpddr2io_regs->control_lpddr2io1_2);
- writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3);
-
- /* EMIF2 */
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0);
- writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1);
- /* No pull for GR10 as per hw team's recommendation */
- writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
- &lpddr2io_regs->control_lpddr2io2_2);
- writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3);
-
- /*
- * Some of these settings (TRIM values) come from eFuse and are
- * in turn programmed in the eFuse at manufacturing time after
- * calibration of the device. Do the software over-ride only if
- * the device is not correctly trimmed
- */
- if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) {
-
- writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- &ctrl->control_ldosram_iva_voltage_ctrl);
-
- writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- &ctrl->control_ldosram_mpu_voltage_ctrl);
-
- writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
- &ctrl->control_ldosram_core_voltage_ctrl);
- }
-
- if (!readl(&ctrl->control_efuse_1))
- writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1);
-
- if (!readl(&ctrl->control_efuse_2))
- writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2);
-}
-#endif
-
-void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
-{
- int i;
- struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
-
- for (i = 0; i < size; i++, pad++)
- writew(pad->val, base + pad->offset);
-}
-
-static void set_muxconf_regs_essential(void)
-{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
- sizeof(core_padconf_array_essential) /
- sizeof(struct pad_conf_entry));
-
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
- sizeof(wkup_padconf_array_essential) /
- sizeof(struct pad_conf_entry));
-
- if (omap_revision() >= OMAP4460_ES1_0)
- do_set_mux(CONTROL_PADCONF_WKUP,
- wkup_padconf_array_essential_4460,
- sizeof(wkup_padconf_array_essential_4460) /
- sizeof(struct pad_conf_entry));
-}
-
-static void set_mux_conf_regs(void)
-{
- switch (omap4_hw_init_context()) {
- case OMAP_INIT_CONTEXT_SPL:
- set_muxconf_regs_essential();
- break;
- case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL:
- set_muxconf_regs_non_essential();
- break;
- case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
- case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
- set_muxconf_regs_essential();
- set_muxconf_regs_non_essential();
- break;
- }
-}
-
-static u32 cortex_a9_rev(void)
-{
-
- unsigned int rev;
-
- /* Read Main ID Register (MIDR) */
- asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev));
-
- return rev;
-}
-
-static void init_omap4_revision(void)
-{
- /*
- * For some of the ES2/ES1 boards ID_CODE is not reliable:
- * Also, ES1 and ES2 have different ARM revisions
- * So use ARM revision for identification
- */
- unsigned int arm_rev = cortex_a9_rev();
-
- switch (arm_rev) {
- case MIDR_CORTEX_A9_R0P1:
- *omap4_revision = OMAP4430_ES1_0;
- break;
- case MIDR_CORTEX_A9_R1P2:
- switch (readl(CONTROL_ID_CODE)) {
- case OMAP4430_CONTROL_ID_CODE_ES2_0:
- *omap4_revision = OMAP4430_ES2_0;
- break;
- case OMAP4430_CONTROL_ID_CODE_ES2_1:
- *omap4_revision = OMAP4430_ES2_1;
- break;
- case OMAP4430_CONTROL_ID_CODE_ES2_2:
- *omap4_revision = OMAP4430_ES2_2;
- break;
- default:
- *omap4_revision = OMAP4430_ES2_0;
- break;
- }
- break;
- case MIDR_CORTEX_A9_R1P3:
- *omap4_revision = OMAP4430_ES2_3;
- break;
- case MIDR_CORTEX_A9_R2P10:
- switch (readl(CONTROL_ID_CODE)) {
- case OMAP4460_CONTROL_ID_CODE_ES1_0:
- *omap4_revision = OMAP4460_ES1_0;
- break;
- case OMAP4460_CONTROL_ID_CODE_ES1_1:
- *omap4_revision = OMAP4460_ES1_1;
- break;
- default:
- *omap4_revision = OMAP4460_ES1_0;
- break;
- }
- break;
- default:
- *omap4_revision = OMAP4430_SILICON_ID_INVALID;
- break;
- }
-}
-
-void omap_rev_string(char *omap4_rev_string)
-{
- u32 omap4_rev = omap_revision();
- u32 omap4_variant = (omap4_rev & 0xFFFF0000) >> 16;
- u32 major_rev = (omap4_rev & 0x00000F00) >> 8;
- u32 minor_rev = (omap4_rev & 0x000000F0) >> 4;
-
- sprintf(omap4_rev_string, "OMAP%x ES%x.%x", omap4_variant, major_rev,
- minor_rev);
-}
-
-/*
- * Routine: s_init
- * Description: Does early system init of watchdog, muxing, andclocks
- * Watchdog disable is done always. For the rest what gets done
- * depends on the boot mode in which this function is executed
- * 1. s_init of SPL running from SRAM
- * 2. s_init of U-Boot running from FLASH
- * 3. s_init of U-Boot loaded to SDRAM by SPL
- * 4. s_init of U-Boot loaded to SDRAM by ROM code using the
- * Configuration Header feature
- * Please have a look at the respective functions to see what gets
- * done in each of these cases
- * This function is called with SRAM stack.
- */
-void s_init(void)
-{
- init_omap4_revision();
- watchdog_init();
- set_mux_conf_regs();
-#ifdef CONFIG_SPL_BUILD
- setup_clocks_for_console();
- preloader_console_init();
- do_io_settings();
-#endif
- prcm_init();
-#ifdef CONFIG_SPL_BUILD
- /* For regular u-boot sdram_init() is called from dram_init() */
- sdram_init();
-#endif
-}
-
-/*
- * Routine: wait_for_command_complete
- * Description: Wait for posting to finish on watchdog
- */
-void wait_for_command_complete(struct watchdog *wd_base)
-{
- int pending = 1;
- do {
- pending = readl(&wd_base->wwps);
- } while (pending);
-}
-
-/*
- * Routine: watchdog_init
- * Description: Shut down watch dogs
- */
-void watchdog_init(void)
-{
- struct watchdog *wd2_base = (struct watchdog *)WDT2_BASE;
-
- writel(WD_UNLOCK1, &wd2_base->wspr);
- wait_for_command_complete(wd2_base);
- writel(WD_UNLOCK2, &wd2_base->wspr);
-}
-
-
-/*
- * This function finds the SDRAM size available in the system
- * based on DMM section configurations
- * This is needed because the size of memory installed may be
- * different on different versions of the board
- */
-u32 omap4_sdram_size(void)
-{
- u32 section, i, total_size = 0, size, addr;
- for (i = 0; i < 4; i++) {
- section = __raw_readl(OMAP44XX_DMM_LISA_MAP_BASE + i*4);
- addr = section & OMAP44XX_SYS_ADDR_MASK;
- /* See if the address is valid */
- if ((addr >= OMAP44XX_DRAM_ADDR_SPACE_START) &&
- (addr < OMAP44XX_DRAM_ADDR_SPACE_END)) {
- size = ((section & OMAP44XX_SYS_SIZE_MASK) >>
- OMAP44XX_SYS_SIZE_SHIFT);
- size = 1 << size;
- size *= SZ_16M;
- total_size += size;
- }
- }
- return total_size;
-}
-
-
-/*
- * Routine: dram_init
- * Description: sets uboots idea of sdram size
- */
-int dram_init(void)
-{
- sdram_init();
- gd->ram_size = omap4_sdram_size();
-
- return 0;
-}
-
-/*
- * Print board information
- */
-int checkboard(void)
-{
- puts(sysinfo.board_string);
- return 0;
-}
-
-/*
-* This function is called by start_armboot. You can reliably use static
-* data. Any boot-time function that require static data should be
-* called from here
-*/
-int arch_cpu_init(void)
-{
- return 0;
-}
-
-#ifndef CONFIG_SYS_L2CACHE_OFF
-void v7_outer_cache_enable(void)
-{
- set_pl310_ctrl_reg(1);
-}
-
-void v7_outer_cache_disable(void)
-{
- set_pl310_ctrl_reg(0);
-}
-#endif
-
-#ifndef CONFIG_SYS_DCACHE_OFF
-void enable_caches(void)
-{
- /* Enable D-cache. I-cache is already enabled in start.S */
- dcache_enable();
-}
-#endif
diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c
index 095ba39..0886f92 100644
--- a/arch/arm/cpu/armv7/omap4/clocks.c
+++ b/arch/arm/cpu/armv7/omap4/clocks.c
@@ -50,7 +50,7 @@
struct omap4_prcm_regs *const prcm = (struct omap4_prcm_regs *)0x4A004100;
-static const u32 sys_clk_array[8] = {
+const u32 sys_clk_array[8] = {
12000000, /* 12 MHz */
13000000, /* 13 MHz */
16800000, /* 16.8 MHz */
@@ -79,14 +79,14 @@ static const struct dpll_params mpu_dpll_params_1840mhz[NUM_SYS_CLKS] = {
};
/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */
-static const struct dpll_params mpu_dpll_params_1584mhz[NUM_SYS_CLKS] = {
- {66, 0, 1, -1, -1, -1, -1, -1}, /* 12 MHz */
- {792, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */
- {330, 6, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
- {165, 3, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
- {396, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */
- {88, 2, 1, -1, -1, -1, -1, -1}, /* 27 MHz */
- {165, 7, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = {
+ {200, 2, 1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {800, 12, 1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {619, 12, 1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {125, 2, 1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {400, 12, 1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {800, 26, 1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {125, 5, 1, -1, -1, -1, -1, -1} /* 38.4 MHz */
};
/* dpll locked at 1200 MHz - MPU clk at 600 MHz */
@@ -168,7 +168,6 @@ static const struct dpll_params abe_dpll_params_32k_196608khz = {
750, 0, 1, 1, -1, -1, -1, -1
};
-
static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
{80, 0, 2, -1, -1, -1, -1, -1}, /* 12 MHz */
{960, 12, 2, -1, -1, -1, -1, -1}, /* 13 MHz */
@@ -179,98 +178,10 @@ static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
{25, 0, 2, -1, -1, -1, -1, -1} /* 38.4 MHz */
};
-static inline u32 __get_sys_clk_index(void)
-{
- u32 ind;
- /*
- * For ES1 the ROM code calibration of sys clock is not reliable
- * due to hw issue. So, use hard-coded value. If this value is not
- * correct for any board over-ride this function in board file
- * From ES2.0 onwards you will get this information from
- * CM_SYS_CLKSEL
- */
- if (omap_revision() == OMAP4430_ES1_0)
- ind = OMAP_SYS_CLK_IND_38_4_MHZ;
- else {
- /* SYS_CLKSEL - 1 to match the dpll param array indices */
- ind = (readl(&prcm->cm_sys_clksel) &
- CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1;
- }
- return ind;
-}
-
-u32 get_sys_clk_index(void)
- __attribute__ ((weak, alias("__get_sys_clk_index")));
-
-u32 get_sys_clk_freq(void)
-{
- u8 index = get_sys_clk_index();
- return sys_clk_array[index];
-}
-
-static inline void do_bypass_dpll(u32 *const base)
-{
- struct dpll_regs *dpll_regs = (struct dpll_regs *)base;
-
- clrsetbits_le32(&dpll_regs->cm_clkmode_dpll,
- CM_CLKMODE_DPLL_DPLL_EN_MASK,
- DPLL_EN_FAST_RELOCK_BYPASS <<
- CM_CLKMODE_DPLL_EN_SHIFT);
-}
-
-static inline void wait_for_bypass(u32 *const base)
-{
- struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
-
- if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll,
- LDELAY)) {
- printf("Bypassing DPLL failed %p\n", base);
- }
-}
-
-static inline void do_lock_dpll(u32 *const base)
+void setup_post_dividers(u32 *const base, const struct dpll_params *params)
{
struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
- clrsetbits_le32(&dpll_regs->cm_clkmode_dpll,
- CM_CLKMODE_DPLL_DPLL_EN_MASK,
- DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT);
-}
-
-static inline void wait_for_lock(u32 *const base)
-{
- struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
-
- if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK,
- &dpll_regs->cm_idlest_dpll, LDELAY)) {
- printf("DPLL locking failed for %p\n", base);
- hang();
- }
-}
-
-static void do_setup_dpll(u32 *const base, const struct dpll_params *params,
- u8 lock)
-{
- u32 temp;
- struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
-
- bypass_dpll(base);
-
- /* Set M & N */
- temp = readl(&dpll_regs->cm_clksel_dpll);
-
- temp &= ~CM_CLKSEL_DPLL_M_MASK;
- temp |= (params->m << CM_CLKSEL_DPLL_M_SHIFT) & CM_CLKSEL_DPLL_M_MASK;
-
- temp &= ~CM_CLKSEL_DPLL_N_MASK;
- temp |= (params->n << CM_CLKSEL_DPLL_N_SHIFT) & CM_CLKSEL_DPLL_N_MASK;
-
- writel(temp, &dpll_regs->cm_clksel_dpll);
-
- /* Lock */
- if (lock)
- do_lock_dpll(base);
-
/* Setup post-dividers */
if (params->m2 >= 0)
writel(params->m2, &dpll_regs->cm_div_m2_dpll);
@@ -284,10 +195,29 @@ static void do_setup_dpll(u32 *const base, const struct dpll_params *params,
writel(params->m6, &dpll_regs->cm_div_m6_dpll);
if (params->m7 >= 0)
writel(params->m7, &dpll_regs->cm_div_m7_dpll);
+}
+
+/*
+ * Lock MPU dpll
+ *
+ * Resulting MPU frequencies:
+ * 4430 ES1.0 : 600 MHz
+ * 4430 ES2.x : 792 MHz (OPP Turbo)
+ * 4460 : 920 MHz (OPP Turbo) - DCC disabled
+ */
+const struct dpll_params *get_mpu_dpll_params(void)
+{
+ u32 omap_rev, sysclk_ind;
- /* Wait till the DPLL locks */
- if (lock)
- wait_for_lock(base);
+ omap_rev = omap_revision();
+ sysclk_ind = get_sys_clk_index();
+
+ if (omap_rev == OMAP4430_ES1_0)
+ return &mpu_dpll_params_1200mhz[sysclk_ind];
+ else if (omap_rev < OMAP4460_ES1_0)
+ return &mpu_dpll_params_1600mhz[sysclk_ind];
+ else
+ return &mpu_dpll_params_1840mhz[sysclk_ind];
}
const struct dpll_params *get_core_dpll_params(void)
@@ -306,228 +236,33 @@ const struct dpll_params *get_core_dpll_params(void)
}
}
-u32 omap4_ddr_clk(void)
-{
- u32 ddr_clk, sys_clk_khz;
- const struct dpll_params *core_dpll_params;
-
- sys_clk_khz = get_sys_clk_freq() / 1000;
-
- core_dpll_params = get_core_dpll_params();
- debug("sys_clk %d\n ", sys_clk_khz * 1000);
-
- /* Find Core DPLL locked frequency first */
- ddr_clk = sys_clk_khz * 2 * core_dpll_params->m /
- (core_dpll_params->n + 1);
- /*
- * DDR frequency is PHY_ROOT_CLK/2
- * PHY_ROOT_CLK = Fdpll/2/M2
- */
- ddr_clk = ddr_clk / 4 / core_dpll_params->m2;
-
- ddr_clk *= 1000; /* convert to Hz */
- debug("ddr_clk %d\n ", ddr_clk);
-
- return ddr_clk;
+const struct dpll_params *get_per_dpll_params(void)
+{
+ u32 sysclk_ind = get_sys_clk_index();
+ return &per_dpll_params_1536mhz[sysclk_ind];
}
-/*
- * Lock MPU dpll
- *
- * Resulting MPU frequencies:
- * 4430 ES1.0 : 600 MHz
- * 4430 ES2.x : 792 MHz (OPP Turbo)
- * 4460 : 920 MHz (OPP Turbo) - DCC disabled
- */
-void configure_mpu_dpll(void)
+const struct dpll_params *get_iva_dpll_params(void)
{
- const struct dpll_params *params;
- struct dpll_regs *mpu_dpll_regs;
- u32 omap4_rev, sysclk_ind;
-
- omap4_rev = omap_revision();
- sysclk_ind = get_sys_clk_index();
-
- if (omap4_rev == OMAP4430_ES1_0)
- params = &mpu_dpll_params_1200mhz[sysclk_ind];
- else if (omap4_rev < OMAP4460_ES1_0)
- params = &mpu_dpll_params_1584mhz[sysclk_ind];
- else
- params = &mpu_dpll_params_1840mhz[sysclk_ind];
-
- /* DCC and clock divider settings for 4460 */
- if (omap4_rev >= OMAP4460_ES1_0) {
- mpu_dpll_regs =
- (struct dpll_regs *)&prcm->cm_clkmode_dpll_mpu;
- bypass_dpll(&prcm->cm_clkmode_dpll_mpu);
- clrbits_le32(&prcm->cm_mpu_mpu_clkctrl,
- MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK);
- setbits_le32(&prcm->cm_mpu_mpu_clkctrl,
- MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK);
- clrbits_le32(&mpu_dpll_regs->cm_clksel_dpll,
- CM_CLKSEL_DCC_EN_MASK);
- }
-
- do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK);
- debug("MPU DPLL locked\n");
+ u32 sysclk_ind = get_sys_clk_index();
+ return &iva_dpll_params_1862mhz[sysclk_ind];
}
-static void setup_dplls(void)
+const struct dpll_params *get_usb_dpll_params(void)
{
- u32 sysclk_ind, temp;
- const struct dpll_params *params;
- debug("setup_dplls\n");
-
- sysclk_ind = get_sys_clk_index();
-
- /* CORE dpll */
- params = get_core_dpll_params(); /* default - safest */
- /*
- * Do not lock the core DPLL now. Just set it up.
- * Core DPLL will be locked after setting up EMIF
- * using the FREQ_UPDATE method(freq_update_core())
- */
- do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, DPLL_NO_LOCK);
- /* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */
- temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) |
- (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) |
- (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT);
- writel(temp, &prcm->cm_clksel_core);
- debug("Core DPLL configured\n");
-
- /* lock PER dpll */
- do_setup_dpll(&prcm->cm_clkmode_dpll_per,
- &per_dpll_params_1536mhz[sysclk_ind], DPLL_LOCK);
- debug("PER DPLL locked\n");
-
- /* MPU dpll */
- configure_mpu_dpll();
+ u32 sysclk_ind = get_sys_clk_index();
+ return &usb_dpll_params_1920mhz[sysclk_ind];
}
-static void setup_non_essential_dplls(void)
+const struct dpll_params *get_abe_dpll_params(void)
{
- u32 sys_clk_khz, abe_ref_clk;
- u32 sysclk_ind, sd_div, num, den;
- const struct dpll_params *params;
-
- sysclk_ind = get_sys_clk_index();
- sys_clk_khz = get_sys_clk_freq() / 1000;
-
- /* IVA */
- clrsetbits_le32(&prcm->cm_bypclk_dpll_iva,
- CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2);
-
- do_setup_dpll(&prcm->cm_clkmode_dpll_iva,
- &iva_dpll_params_1862mhz[sysclk_ind], DPLL_LOCK);
-
- /*
- * USB:
- * USB dpll is J-type. Need to set DPLL_SD_DIV for jitter correction
- * DPLL_SD_DIV = CEILING ([DPLL_MULT/(DPLL_DIV+1)]* CLKINP / 250)
- * - where CLKINP is sys_clk in MHz
- * Use CLKINP in KHz and adjust the denominator accordingly so
- * that we have enough accuracy and at the same time no overflow
- */
- params = &usb_dpll_params_1920mhz[sysclk_ind];
- num = params->m * sys_clk_khz;
- den = (params->n + 1) * 250 * 1000;
- num += den - 1;
- sd_div = num / den;
- clrsetbits_le32(&prcm->cm_clksel_dpll_usb,
- CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK,
- sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT);
-
- /* Now setup the dpll with the regular function */
- do_setup_dpll(&prcm->cm_clkmode_dpll_usb, params, DPLL_LOCK);
-
-#ifdef CONFIG_SYS_OMAP4_ABE_SYSCK
- params = &abe_dpll_params_sysclk_196608khz[sysclk_ind];
- abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+ u32 sysclk_ind = get_sys_clk_index();
+ return &abe_dpll_params_sysclk_196608khz[sysclk_ind];
#else
- params = &abe_dpll_params_32k_196608khz;
- abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK;
- /*
- * We need to enable some additional options to achieve
- * 196.608MHz from 32768 Hz
- */
- setbits_le32(&prcm->cm_clkmode_dpll_abe,
- CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK|
- CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK|
- CM_CLKMODE_DPLL_LPMODE_EN_MASK|
- CM_CLKMODE_DPLL_REGM4XEN_MASK);
- /* Spend 4 REFCLK cycles at each stage */
- clrsetbits_le32(&prcm->cm_clkmode_dpll_abe,
- CM_CLKMODE_DPLL_RAMP_RATE_MASK,
- 1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT);
+ return &abe_dpll_params_32k_196608khz;
#endif
-
- /* Select the right reference clk */
- clrsetbits_le32(&prcm->cm_abe_pll_ref_clksel,
- CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK,
- abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT);
- /* Lock the dpll */
- do_setup_dpll(&prcm->cm_clkmode_dpll_abe, params, DPLL_LOCK);
-}
-
-static void do_scale_tps62361(u32 reg, u32 volt_mv)
-{
- u32 temp, step;
-
- step = volt_mv - TPS62361_BASE_VOLT_MV;
- step /= 10;
-
- /*
- * Select SET1 in TPS62361:
- * VSEL1 is grounded on board. So the following selects
- * VSEL1 = 0 and VSEL0 = 1
- */
- gpio_direction_output(TPS62361_VSEL0_GPIO, 0);
- gpio_set_value(TPS62361_VSEL0_GPIO, 1);
-
- temp = TPS62361_I2C_SLAVE_ADDR |
- (reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) |
- (step << PRM_VC_VAL_BYPASS_DATA_SHIFT) |
- PRM_VC_VAL_BYPASS_VALID_BIT;
- debug("do_scale_tps62361: volt - %d step - 0x%x\n", volt_mv, step);
-
- writel(temp, &prcm->prm_vc_val_bypass);
- if (!wait_on_value(PRM_VC_VAL_BYPASS_VALID_BIT, 0,
- &prcm->prm_vc_val_bypass, LDELAY)) {
- puts("Scaling voltage failed for vdd_mpu from TPS\n");
- }
-}
-
-static void do_scale_vcore(u32 vcore_reg, u32 volt_mv)
-{
- u32 temp, offset_code;
- u32 step = 12660; /* 12.66 mV represented in uV */
- u32 offset = volt_mv;
-
- /* convert to uV for better accuracy in the calculations */
- offset *= 1000;
-
- if (omap_revision() == OMAP4430_ES1_0)
- offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV;
- else
- offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV;
-
- offset_code = (offset + step - 1) / step;
- /* The code starts at 1 not 0 */
- offset_code++;
-
- debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv,
- offset_code);
-
- temp = SMPS_I2C_SLAVE_ADDR |
- (vcore_reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) |
- (offset_code << PRM_VC_VAL_BYPASS_DATA_SHIFT) |
- PRM_VC_VAL_BYPASS_VALID_BIT;
- writel(temp, &prcm->prm_vc_val_bypass);
- if (!wait_on_value(PRM_VC_VAL_BYPASS_VALID_BIT, 0,
- &prcm->prm_vc_val_bypass, LDELAY)) {
- printf("Scaling voltage failed for 0x%x\n", vcore_reg);
- }
}
/*
@@ -536,32 +271,16 @@ static void do_scale_vcore(u32 vcore_reg, u32 volt_mv)
* enabled in bootloader. Voltage initialization in the kernel will set
* these to the nominal values after enabling Smart-Reflex
*/
-static void scale_vcores(void)
+void scale_vcores(void)
{
- u32 volt, sys_clk_khz, cycles_hi, cycles_low, temp, omap4_rev;
+ u32 volt, omap_rev;
- sys_clk_khz = get_sys_clk_freq() / 1000;
+ setup_sri2c();
- /*
- * Setup the dedicated I2C controller for Voltage Control
- * I2C clk - high period 40% low period 60%
- */
- cycles_hi = sys_clk_khz * 4 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
- cycles_low = sys_clk_khz * 6 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
- /* values to be set in register - less by 5 & 7 respectively */
- cycles_hi -= 5;
- cycles_low -= 7;
- temp = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) |
- (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
- writel(temp, &prcm->prm_vc_cfg_i2c_clk);
-
- /* Disable high speed mode and all advanced features */
- writel(0x0, &prcm->prm_vc_cfg_i2c_mode);
-
- omap4_rev = omap_revision();
+ omap_rev = omap_revision();
/* TPS - supplies vdd_mpu on 4460 */
- if (omap4_rev >= OMAP4460_ES1_0) {
- volt = 1430;
+ if (omap_rev >= OMAP4460_ES1_0) {
+ volt = 1313;
do_scale_tps62361(TPS62361_REG_ADDR_SET1, volt);
}
@@ -576,8 +295,8 @@ static void scale_vcores(void)
*
* 4460 : supplies vdd_core
*/
- if (omap4_rev < OMAP4460_ES1_0) {
- volt = 1417;
+ if (omap_rev < OMAP4460_ES1_0) {
+ volt = 1325;
do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
} else {
volt = 1200;
@@ -593,55 +312,18 @@ static void scale_vcores(void)
* 4430 : supplies vdd_core
* 4460 : not connected
*/
- if (omap4_rev < OMAP4460_ES1_0) {
+ if (omap_rev < OMAP4460_ES1_0) {
volt = 1200;
do_scale_vcore(SMPS_REG_ADDR_VCORE3, volt);
}
}
-static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode)
-{
- clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK,
- enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT);
- debug("Enable clock domain - %p\n", clkctrl_reg);
-}
-
-static inline void wait_for_clk_enable(u32 *clkctrl_addr)
-{
- u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
- u32 bound = LDELAY;
-
- while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
- (idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
-
- clkctrl = readl(clkctrl_addr);
- idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
- MODULE_CLKCTRL_IDLEST_SHIFT;
- if (--bound == 0) {
- printf("Clock enable failed for 0x%p idlest 0x%x\n",
- clkctrl_addr, clkctrl);
- return;
- }
- }
-}
-
-static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode,
- u32 wait_for_enable)
-{
- clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK,
- enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT);
- debug("Enable clock module - %p\n", clkctrl_addr);
- if (wait_for_enable)
- wait_for_clk_enable(clkctrl_addr);
-}
-
/*
* Enable essential clock domains, modules and
* do some additional special settings needed
*/
-static void enable_basic_clocks(void)
+void enable_basic_clocks(void)
{
- u32 i, max = 100, wait_for_enable = 1;
u32 *const clk_domains_essential[] = {
&prcm->cm_l4per_clkstctrl,
&prcm->cm_l3init_clkstctrl,
@@ -651,30 +333,23 @@ static void enable_basic_clocks(void)
};
u32 *const clk_modules_hw_auto_essential[] = {
+ &prcm->cm_memif_emif_1_clkctrl,
+ &prcm->cm_memif_emif_2_clkctrl,
+ &prcm->cm_l4cfg_l4_cfg_clkctrl,
&prcm->cm_wkup_gpio1_clkctrl,
&prcm->cm_l4per_gpio2_clkctrl,
&prcm->cm_l4per_gpio3_clkctrl,
&prcm->cm_l4per_gpio4_clkctrl,
&prcm->cm_l4per_gpio5_clkctrl,
&prcm->cm_l4per_gpio6_clkctrl,
- &prcm->cm_memif_emif_1_clkctrl,
- &prcm->cm_memif_emif_2_clkctrl,
- &prcm->cm_l3init_hsusbotg_clkctrl,
- &prcm->cm_l3init_usbphy_clkctrl,
- &prcm->cm_l4cfg_l4_cfg_clkctrl,
0
};
u32 *const clk_modules_explicit_en_essential[] = {
- &prcm->cm_l4per_gptimer2_clkctrl,
+ &prcm->cm_wkup_gptimer1_clkctrl,
&prcm->cm_l3init_hsmmc1_clkctrl,
&prcm->cm_l3init_hsmmc2_clkctrl,
- &prcm->cm_l4per_mcspi1_clkctrl,
- &prcm->cm_wkup_gptimer1_clkctrl,
- &prcm->cm_l4per_i2c1_clkctrl,
- &prcm->cm_l4per_i2c2_clkctrl,
- &prcm->cm_l4per_i2c3_clkctrl,
- &prcm->cm_l4per_i2c4_clkctrl,
+ &prcm->cm_l4per_gptimer2_clkctrl,
&prcm->cm_wkup_wdtimer2_clkctrl,
&prcm->cm_l4per_uart3_clkctrl,
0
@@ -698,40 +373,45 @@ static void enable_basic_clocks(void)
setbits_le32(&prcm->cm_l3init_usbphy_clkctrl,
USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK);
- /* Put the clock domains in SW_WKUP mode */
- for (i = 0; (i < max) && clk_domains_essential[i]; i++) {
- enable_clock_domain(clk_domains_essential[i],
- CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
- }
+ do_enable_clocks(clk_domains_essential,
+ clk_modules_hw_auto_essential,
+ clk_modules_explicit_en_essential,
+ 1);
+}
+
+void enable_basic_uboot_clocks(void)
+{
+ u32 *const clk_domains_essential[] = {
+ 0
+ };
- /* Clock modules that need to be put in HW_AUTO */
- for (i = 0; (i < max) && clk_modules_hw_auto_essential[i]; i++) {
- enable_clock_module(clk_modules_hw_auto_essential[i],
- MODULE_CLKCTRL_MODULEMODE_HW_AUTO,
- wait_for_enable);
+ u32 *const clk_modules_hw_auto_essential[] = {
+ &prcm->cm_l3init_hsusbotg_clkctrl,
+ &prcm->cm_l3init_usbphy_clkctrl,
+ 0
};
- /* Clock modules that need to be put in SW_EXPLICIT_EN mode */
- for (i = 0; (i < max) && clk_modules_explicit_en_essential[i]; i++) {
- enable_clock_module(clk_modules_explicit_en_essential[i],
- MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
- wait_for_enable);
+ u32 *const clk_modules_explicit_en_essential[] = {
+ &prcm->cm_l4per_mcspi1_clkctrl,
+ &prcm->cm_l4per_i2c1_clkctrl,
+ &prcm->cm_l4per_i2c2_clkctrl,
+ &prcm->cm_l4per_i2c3_clkctrl,
+ &prcm->cm_l4per_i2c4_clkctrl,
+ 0
};
- /* Put the clock domains in HW_AUTO mode now */
- for (i = 0; (i < max) && clk_domains_essential[i]; i++) {
- enable_clock_domain(clk_domains_essential[i],
- CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
- }
+ do_enable_clocks(clk_domains_essential,
+ clk_modules_hw_auto_essential,
+ clk_modules_explicit_en_essential,
+ 1);
}
/*
* Enable non-essential clock domains, modules and
* do some additional special settings needed
*/
-static void enable_non_essential_clocks(void)
+void enable_non_essential_clocks(void)
{
- u32 i, max = 100, wait_for_enable = 0;
u32 *const clk_domains_non_essential[] = {
&prcm->cm_mpu_m3_clkstctrl,
&prcm->cm_ivahd_clkstctrl,
@@ -807,135 +487,13 @@ static void enable_non_essential_clocks(void)
/* Enable all optional functional clocks of DSS */
setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
-
- /* Put the clock domains in SW_WKUP mode */
- for (i = 0; (i < max) && clk_domains_non_essential[i]; i++) {
- enable_clock_domain(clk_domains_non_essential[i],
- CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
- }
-
- /* Clock modules that need to be put in HW_AUTO */
- for (i = 0; (i < max) && clk_modules_hw_auto_non_essential[i]; i++) {
- enable_clock_module(clk_modules_hw_auto_non_essential[i],
- MODULE_CLKCTRL_MODULEMODE_HW_AUTO,
- wait_for_enable);
- };
-
- /* Clock modules that need to be put in SW_EXPLICIT_EN mode */
- for (i = 0; (i < max) && clk_modules_explicit_en_non_essential[i];
- i++) {
- enable_clock_module(clk_modules_explicit_en_non_essential[i],
- MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
- wait_for_enable);
- };
-
- /* Put the clock domains in HW_AUTO mode now */
- for (i = 0; (i < max) && clk_domains_non_essential[i]; i++) {
- enable_clock_domain(clk_domains_non_essential[i],
- CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
- }
+ do_enable_clocks(clk_domains_non_essential,
+ clk_modules_hw_auto_non_essential,
+ clk_modules_explicit_en_non_essential,
+ 0);
/* Put camera module in no sleep mode */
clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK,
CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
MODULE_CLKCTRL_MODULEMODE_SHIFT);
}
-
-
-void freq_update_core(void)
-{
- u32 freq_config1 = 0;
- const struct dpll_params *core_dpll_params;
-
- core_dpll_params = get_core_dpll_params();
- /* Put EMIF clock domain in sw wakeup mode */
- enable_clock_domain(&prcm->cm_memif_clkstctrl,
- CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
- wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl);
- wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl);
-
- freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK |
- SHADOW_FREQ_CONFIG1_DLL_RESET_MASK;
-
- freq_config1 |= (DPLL_EN_LOCK << SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT) &
- SHADOW_FREQ_CONFIG1_DPLL_EN_MASK;
-
- freq_config1 |= (core_dpll_params->m2 <<
- SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) &
- SHADOW_FREQ_CONFIG1_M2_DIV_MASK;
-
- writel(freq_config1, &prcm->cm_shadow_freq_config1);
- if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0,
- &prcm->cm_shadow_freq_config1, LDELAY)) {
- puts("FREQ UPDATE procedure failed!!");
- hang();
- }
-
- /* Put EMIF clock domain back in hw auto mode */
- enable_clock_domain(&prcm->cm_memif_clkstctrl,
- CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
- wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl);
- wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl);
-}
-
-void bypass_dpll(u32 *const base)
-{
- do_bypass_dpll(base);
- wait_for_bypass(base);
-}
-
-void lock_dpll(u32 *const base)
-{
- do_lock_dpll(base);
- wait_for_lock(base);
-}
-
-void setup_clocks_for_console(void)
-{
- /* Do not add any spl_debug prints in this function */
- clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
- CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
- CD_CLKCTRL_CLKTRCTRL_SHIFT);
-
- /* Enable all UARTs - console will be on one of them */
- clrsetbits_le32(&prcm->cm_l4per_uart1_clkctrl,
- MODULE_CLKCTRL_MODULEMODE_MASK,
- MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
- MODULE_CLKCTRL_MODULEMODE_SHIFT);
-
- clrsetbits_le32(&prcm->cm_l4per_uart2_clkctrl,
- MODULE_CLKCTRL_MODULEMODE_MASK,
- MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
- MODULE_CLKCTRL_MODULEMODE_SHIFT);
-
- clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl,
- MODULE_CLKCTRL_MODULEMODE_MASK,
- MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
- MODULE_CLKCTRL_MODULEMODE_SHIFT);
-
- clrsetbits_le32(&prcm->cm_l4per_uart3_clkctrl,
- MODULE_CLKCTRL_MODULEMODE_MASK,
- MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
- MODULE_CLKCTRL_MODULEMODE_SHIFT);
-
- clrsetbits_le32(&prcm->cm_l4per_clkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
- CD_CLKCTRL_CLKTRCTRL_HW_AUTO <<
- CD_CLKCTRL_CLKTRCTRL_SHIFT);
-}
-
-void prcm_init(void)
-{
- switch (omap4_hw_init_context()) {
- case OMAP_INIT_CONTEXT_SPL:
- case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
- case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
- enable_basic_clocks();
- scale_vcores();
- setup_dplls();
- setup_non_essential_dplls();
- enable_non_essential_clocks();
- break;
- default:
- break;
- }
-}
diff --git a/arch/arm/cpu/armv7/omap4/emif.c b/arch/arm/cpu/armv7/omap4/emif.c
index 988b205..ca4823d 100644
--- a/arch/arm/cpu/armv7/omap4/emif.c
+++ b/arch/arm/cpu/armv7/omap4/emif.c
@@ -26,645 +26,15 @@
*/
#include <common.h>
-#include <asm/arch/emif.h>
-#include <asm/arch/clocks.h>
+#include <asm/emif.h>
#include <asm/arch/sys_proto.h>
-#include <asm/omap_common.h>
#include <asm/utils.h>
-static inline u32 emif_num(u32 base)
-{
- if (base == OMAP44XX_EMIF1)
- return 1;
- else if (base == OMAP44XX_EMIF2)
- return 2;
- else
- return 0;
-}
-
-static inline u32 get_mr(u32 base, u32 cs, u32 mr_addr)
-{
- u32 mr;
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
-
- mr_addr |= cs << OMAP44XX_REG_CS_SHIFT;
- writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
- if (omap_revision() == OMAP4430_ES2_0)
- mr = readl(&emif->emif_lpddr2_mode_reg_data_es2);
- else
- mr = readl(&emif->emif_lpddr2_mode_reg_data);
- debug("get_mr: EMIF%d cs %d mr %08x val 0x%x\n", emif_num(base),
- cs, mr_addr, mr);
- return mr;
-}
-
-static inline void set_mr(u32 base, u32 cs, u32 mr_addr, u32 mr_val)
-{
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
-
- mr_addr |= cs << OMAP44XX_REG_CS_SHIFT;
- writel(mr_addr, &emif->emif_lpddr2_mode_reg_cfg);
- writel(mr_val, &emif->emif_lpddr2_mode_reg_data);
-}
-
-void emif_reset_phy(u32 base)
-{
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
- u32 iodft;
-
- iodft = readl(&emif->emif_iodft_tlgc);
- iodft |= OMAP44XX_REG_RESET_PHY_MASK;
- writel(iodft, &emif->emif_iodft_tlgc);
-}
-
-static void do_lpddr2_init(u32 base, u32 cs)
-{
- u32 mr_addr;
-
- /* Wait till device auto initialization is complete */
- while (get_mr(base, cs, LPDDR2_MR0) & LPDDR2_MR0_DAI_MASK)
- ;
- set_mr(base, cs, LPDDR2_MR10, MR10_ZQ_ZQINIT);
- /*
- * tZQINIT = 1 us
- * Enough loops assuming a maximum of 2GHz
- */
- sdelay(2000);
- set_mr(base, cs, LPDDR2_MR1, MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3);
- set_mr(base, cs, LPDDR2_MR16, MR16_REF_FULL_ARRAY);
- /*
- * Enable refresh along with writing MR2
- * Encoding of RL in MR2 is (RL - 2)
- */
- mr_addr = LPDDR2_MR2 | OMAP44XX_REG_REFRESH_EN_MASK;
- set_mr(base, cs, mr_addr, RL_FINAL - 2);
-}
-
-static void lpddr2_init(u32 base, const struct emif_regs *regs)
-{
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
-
- /* Not NVM */
- clrbits_le32(&emif->emif_lpddr2_nvm_config, OMAP44XX_REG_CS1NVMEN_MASK);
-
- /*
- * Keep REG_INITREF_DIS = 1 to prevent re-initialization of SDRAM
- * when EMIF_SDRAM_CONFIG register is written
- */
- setbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK);
-
- /*
- * Set the SDRAM_CONFIG and PHY_CTRL for the
- * un-locked frequency & default RL
- */
- writel(regs->sdram_config_init, &emif->emif_sdram_config);
- writel(regs->emif_ddr_phy_ctlr_1_init, &emif->emif_ddr_phy_ctrl_1);
-
- do_lpddr2_init(base, CS0);
- if (regs->sdram_config & OMAP44XX_REG_EBANK_MASK)
- do_lpddr2_init(base, CS1);
-
- writel(regs->sdram_config, &emif->emif_sdram_config);
- writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1);
-
- /* Enable refresh now */
- clrbits_le32(&emif->emif_sdram_ref_ctrl, OMAP44XX_REG_INITREF_DIS_MASK);
-
-}
-
-static void emif_update_timings(u32 base, const struct emif_regs *regs)
-{
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
-
- writel(regs->ref_ctrl, &emif->emif_sdram_ref_ctrl_shdw);
- writel(regs->sdram_tim1, &emif->emif_sdram_tim_1_shdw);
- writel(regs->sdram_tim2, &emif->emif_sdram_tim_2_shdw);
- writel(regs->sdram_tim3, &emif->emif_sdram_tim_3_shdw);
- if (omap_revision() == OMAP4430_ES1_0) {
- /* ES1 bug EMIF should be in force idle during freq_update */
- writel(0, &emif->emif_pwr_mgmt_ctrl);
- } else {
- writel(EMIF_PWR_MGMT_CTRL, &emif->emif_pwr_mgmt_ctrl);
- writel(EMIF_PWR_MGMT_CTRL_SHDW, &emif->emif_pwr_mgmt_ctrl_shdw);
- }
- writel(regs->read_idle_ctrl, &emif->emif_read_idlectrl_shdw);
- writel(regs->zq_config, &emif->emif_zq_config);
- writel(regs->temp_alert_config, &emif->emif_temp_alert_config);
- writel(regs->emif_ddr_phy_ctlr_1, &emif->emif_ddr_phy_ctrl_1_shdw);
-
- if (omap_revision() >= OMAP4460_ES1_0) {
- writel(EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0,
- &emif->emif_l3_config);
- } else {
- writel(EMIF_L3_CONFIG_VAL_SYS_10_LL_0,
- &emif->emif_l3_config);
- }
-}
-
#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
-
-static u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM;
-static u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN;
-static u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE;
-
-/*
- * Organization and refresh requirements for LPDDR2 devices of different
- * types and densities. Derived from JESD209-2 section 2.4
- */
-const struct lpddr2_addressing addressing_table[] = {
- /* Banks tREFIx10 rowx32,rowx16 colx32,colx16 density */
- {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_7, COL_8} },/*64M */
- {BANKS4, T_REFI_15_6, {ROW_12, ROW_12}, {COL_8, COL_9} },/*128M */
- {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_8, COL_9} },/*256M */
- {BANKS4, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*512M */
- {BANKS8, T_REFI_7_8, {ROW_13, ROW_13}, {COL_9, COL_10} },/*1GS4 */
- {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_9, COL_10} },/*2GS4 */
- {BANKS8, T_REFI_3_9, {ROW_14, ROW_14}, {COL_10, COL_11} },/*4G */
- {BANKS8, T_REFI_3_9, {ROW_15, ROW_15}, {COL_10, COL_11} },/*8G */
- {BANKS4, T_REFI_7_8, {ROW_14, ROW_14}, {COL_9, COL_10} },/*1GS2 */
- {BANKS4, T_REFI_3_9, {ROW_15, ROW_15}, {COL_9, COL_10} },/*2GS2 */
-};
-
-static const u32 lpddr2_density_2_size_in_mbytes[] = {
- 8, /* 64Mb */
- 16, /* 128Mb */
- 32, /* 256Mb */
- 64, /* 512Mb */
- 128, /* 1Gb */
- 256, /* 2Gb */
- 512, /* 4Gb */
- 1024, /* 8Gb */
- 2048, /* 16Gb */
- 4096 /* 32Gb */
-};
-
-/*
- * Calculate the period of DDR clock from frequency value and set the
- * denominator and numerator in global variables for easy access later
- */
-static void set_ddr_clk_period(u32 freq)
-{
- /*
- * period = 1/freq
- * period_in_ns = 10^9/freq
- */
- *T_num = 1000000000;
- *T_den = freq;
- cancel_out(T_num, T_den, 200);
-
-}
-
-/*
- * Convert time in nano seconds to number of cycles of DDR clock
- */
-static inline u32 ns_2_cycles(u32 ns)
-{
- return ((ns * (*T_den)) + (*T_num) - 1) / (*T_num);
-}
-
-/*
- * ns_2_cycles with the difference that the time passed is 2 times the actual
- * value(to avoid fractions). The cycles returned is for the original value of
- * the timing parameter
- */
-static inline u32 ns_x2_2_cycles(u32 ns)
-{
- return ((ns * (*T_den)) + (*T_num) * 2 - 1) / ((*T_num) * 2);
-}
-
-/*
- * Find addressing table index based on the device's type(S2 or S4) and
- * density
- */
-s8 addressing_table_index(u8 type, u8 density, u8 width)
-{
- u8 index;
- if ((density > LPDDR2_DENSITY_8Gb) || (width == LPDDR2_IO_WIDTH_8))
- return -1;
-
- /*
- * Look at the way ADDR_TABLE_INDEX* values have been defined
- * in emif.h compared to LPDDR2_DENSITY_* values
- * The table is layed out in the increasing order of density
- * (ignoring type). The exceptions 1GS2 and 2GS2 have been placed
- * at the end
- */
- if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_1Gb))
- index = ADDR_TABLE_INDEX1GS2;
- else if ((type == LPDDR2_TYPE_S2) && (density == LPDDR2_DENSITY_2Gb))
- index = ADDR_TABLE_INDEX2GS2;
- else
- index = density;
-
- debug("emif: addressing table index %d\n", index);
-
- return index;
-}
-
-/*
- * Find the the right timing table from the array of timing
- * tables of the device using DDR clock frequency
- */
-static const struct lpddr2_ac_timings *get_timings_table(const struct
- lpddr2_ac_timings const *const *device_timings,
- u32 freq)
-{
- u32 i, temp, freq_nearest;
- const struct lpddr2_ac_timings *timings = 0;
-
- emif_assert(freq <= MAX_LPDDR2_FREQ);
- emif_assert(device_timings);
-
- /*
- * Start with the maximum allowed frequency - that is always safe
- */
- freq_nearest = MAX_LPDDR2_FREQ;
- /*
- * Find the timings table that has the max frequency value:
- * i. Above or equal to the DDR frequency - safe
- * ii. The lowest that satisfies condition (i) - optimal
- */
- for (i = 0; (i < MAX_NUM_SPEEDBINS) && device_timings[i]; i++) {
- temp = device_timings[i]->max_freq;
- if ((temp >= freq) && (temp <= freq_nearest)) {
- freq_nearest = temp;
- timings = device_timings[i];
- }
- }
- debug("emif: timings table: %d\n", freq_nearest);
- return timings;
-}
-
-/*
- * Finds the value of emif_sdram_config_reg
- * All parameters are programmed based on the device on CS0.
- * If there is a device on CS1, it will be same as that on CS0 or
- * it will be NVM. We don't support NVM yet.
- * If cs1_device pointer is NULL it is assumed that there is no device
- * on CS1
- */
-static u32 get_sdram_config_reg(const struct lpddr2_device_details *cs0_device,
- const struct lpddr2_device_details *cs1_device,
- const struct lpddr2_addressing *addressing,
- u8 RL)
-{
- u32 config_reg = 0;
-
- config_reg |= (cs0_device->type + 4) << OMAP44XX_REG_SDRAM_TYPE_SHIFT;
- config_reg |= EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING <<
- OMAP44XX_REG_IBANK_POS_SHIFT;
-
- config_reg |= cs0_device->io_width << OMAP44XX_REG_NARROW_MODE_SHIFT;
-
- config_reg |= RL << OMAP44XX_REG_CL_SHIFT;
-
- config_reg |= addressing->row_sz[cs0_device->io_width] <<
- OMAP44XX_REG_ROWSIZE_SHIFT;
-
- config_reg |= addressing->num_banks << OMAP44XX_REG_IBANK_SHIFT;
-
- config_reg |= (cs1_device ? EBANK_CS1_EN : EBANK_CS1_DIS) <<
- OMAP44XX_REG_EBANK_SHIFT;
-
- config_reg |= addressing->col_sz[cs0_device->io_width] <<
- OMAP44XX_REG_PAGESIZE_SHIFT;
-
- return config_reg;
-}
-
-static u32 get_sdram_ref_ctrl(u32 freq,
- const struct lpddr2_addressing *addressing)
-{
- u32 ref_ctrl = 0, val = 0, freq_khz;
- freq_khz = freq / 1000;
- /*
- * refresh rate to be set is 'tREFI * freq in MHz
- * division by 10000 to account for khz and x10 in t_REFI_us_x10
- */
- val = addressing->t_REFI_us_x10 * freq_khz / 10000;
- ref_ctrl |= val << OMAP44XX_REG_REFRESH_RATE_SHIFT;
-
- return ref_ctrl;
-}
-
-static u32 get_sdram_tim_1_reg(const struct lpddr2_ac_timings *timings,
- const struct lpddr2_min_tck *min_tck,
- const struct lpddr2_addressing *addressing)
-{
- u32 tim1 = 0, val = 0;
- val = max(min_tck->tWTR, ns_x2_2_cycles(timings->tWTRx2)) - 1;
- tim1 |= val << OMAP44XX_REG_T_WTR_SHIFT;
-
- if (addressing->num_banks == BANKS8)
- val = (timings->tFAW * (*T_den) + 4 * (*T_num) - 1) /
- (4 * (*T_num)) - 1;
- else
- val = max(min_tck->tRRD, ns_2_cycles(timings->tRRD)) - 1;
-
- tim1 |= val << OMAP44XX_REG_T_RRD_SHIFT;
-
- val = ns_2_cycles(timings->tRASmin + timings->tRPab) - 1;
- tim1 |= val << OMAP44XX_REG_T_RC_SHIFT;
-
- val = max(min_tck->tRAS_MIN, ns_2_cycles(timings->tRASmin)) - 1;
- tim1 |= val << OMAP44XX_REG_T_RAS_SHIFT;
-
- val = max(min_tck->tWR, ns_2_cycles(timings->tWR)) - 1;
- tim1 |= val << OMAP44XX_REG_T_WR_SHIFT;
-
- val = max(min_tck->tRCD, ns_2_cycles(timings->tRCD)) - 1;
- tim1 |= val << OMAP44XX_REG_T_RCD_SHIFT;
-
- val = max(min_tck->tRP_AB, ns_2_cycles(timings->tRPab)) - 1;
- tim1 |= val << OMAP44XX_REG_T_RP_SHIFT;
-
- return tim1;
-}
-
-static u32 get_sdram_tim_2_reg(const struct lpddr2_ac_timings *timings,
- const struct lpddr2_min_tck *min_tck)
-{
- u32 tim2 = 0, val = 0;
- val = max(min_tck->tCKE, timings->tCKE) - 1;
- tim2 |= val << OMAP44XX_REG_T_CKE_SHIFT;
-
- val = max(min_tck->tRTP, ns_x2_2_cycles(timings->tRTPx2)) - 1;
- tim2 |= val << OMAP44XX_REG_T_RTP_SHIFT;
-
- /*
- * tXSRD = tRFCab + 10 ns. XSRD and XSNR should have the
- * same value
- */
- val = ns_2_cycles(timings->tXSR) - 1;
- tim2 |= val << OMAP44XX_REG_T_XSRD_SHIFT;
- tim2 |= val << OMAP44XX_REG_T_XSNR_SHIFT;
-
- val = max(min_tck->tXP, ns_x2_2_cycles(timings->tXPx2)) - 1;
- tim2 |= val << OMAP44XX_REG_T_XP_SHIFT;
-
- return tim2;
-}
-
-static u32 get_sdram_tim_3_reg(const struct lpddr2_ac_timings *timings,
- const struct lpddr2_min_tck *min_tck,
- const struct lpddr2_addressing *addressing)
-{
- u32 tim3 = 0, val = 0;
- val = min(timings->tRASmax * 10 / addressing->t_REFI_us_x10 - 1, 0xF);
- tim3 |= val << OMAP44XX_REG_T_RAS_MAX_SHIFT;
-
- val = ns_2_cycles(timings->tRFCab) - 1;
- tim3 |= val << OMAP44XX_REG_T_RFC_SHIFT;
-
- val = ns_x2_2_cycles(timings->tDQSCKMAXx2) - 1;
- tim3 |= val << OMAP44XX_REG_T_TDQSCKMAX_SHIFT;
-
- val = ns_2_cycles(timings->tZQCS) - 1;
- tim3 |= val << OMAP44XX_REG_ZQ_ZQCS_SHIFT;
-
- val = max(min_tck->tCKESR, ns_2_cycles(timings->tCKESR)) - 1;
- tim3 |= val << OMAP44XX_REG_T_CKESR_SHIFT;
-
- return tim3;
-}
-
-static u32 get_zq_config_reg(const struct lpddr2_device_details *cs1_device,
- const struct lpddr2_addressing *addressing,
- u8 volt_ramp)
-{
- u32 zq = 0, val = 0;
- if (volt_ramp)
- val =
- EMIF_ZQCS_INTERVAL_DVFS_IN_US * 10 /
- addressing->t_REFI_us_x10;
- else
- val =
- EMIF_ZQCS_INTERVAL_NORMAL_IN_US * 10 /
- addressing->t_REFI_us_x10;
- zq |= val << OMAP44XX_REG_ZQ_REFINTERVAL_SHIFT;
-
- zq |= (REG_ZQ_ZQCL_MULT - 1) << OMAP44XX_REG_ZQ_ZQCL_MULT_SHIFT;
-
- zq |= (REG_ZQ_ZQINIT_MULT - 1) << OMAP44XX_REG_ZQ_ZQINIT_MULT_SHIFT;
-
- zq |= REG_ZQ_SFEXITEN_ENABLE << OMAP44XX_REG_ZQ_SFEXITEN_SHIFT;
-
- /*
- * Assuming that two chipselects have a single calibration resistor
- * If there are indeed two calibration resistors, then this flag should
- * be enabled to take advantage of dual calibration feature.
- * This data should ideally come from board files. But considering
- * that none of the boards today have calibration resistors per CS,
- * it would be an unnecessary overhead.
- */
- zq |= REG_ZQ_DUALCALEN_DISABLE << OMAP44XX_REG_ZQ_DUALCALEN_SHIFT;
-
- zq |= REG_ZQ_CS0EN_ENABLE << OMAP44XX_REG_ZQ_CS0EN_SHIFT;
-
- zq |= (cs1_device ? 1 : 0) << OMAP44XX_REG_ZQ_CS1EN_SHIFT;
-
- return zq;
-}
-
-static u32 get_temp_alert_config(const struct lpddr2_device_details *cs1_device,
- const struct lpddr2_addressing *addressing,
- u8 is_derated)
-{
- u32 alert = 0, interval;
- interval =
- TEMP_ALERT_POLL_INTERVAL_MS * 10000 / addressing->t_REFI_us_x10;
- if (is_derated)
- interval *= 4;
- alert |= interval << OMAP44XX_REG_TA_REFINTERVAL_SHIFT;
-
- alert |= TEMP_ALERT_CONFIG_DEVCT_1 << OMAP44XX_REG_TA_DEVCNT_SHIFT;
-
- alert |= TEMP_ALERT_CONFIG_DEVWDT_32 << OMAP44XX_REG_TA_DEVWDT_SHIFT;
-
- alert |= 1 << OMAP44XX_REG_TA_SFEXITEN_SHIFT;
-
- alert |= 1 << OMAP44XX_REG_TA_CS0EN_SHIFT;
-
- alert |= (cs1_device ? 1 : 0) << OMAP44XX_REG_TA_CS1EN_SHIFT;
-
- return alert;
-}
-
-static u32 get_read_idle_ctrl_reg(u8 volt_ramp)
-{
- u32 idle = 0, val = 0;
- if (volt_ramp)
- val = ns_2_cycles(READ_IDLE_INTERVAL_DVFS) / 64 - 1;
- else
- /*Maximum value in normal conditions - suggested by hw team */
- val = 0x1FF;
- idle |= val << OMAP44XX_REG_READ_IDLE_INTERVAL_SHIFT;
-
- idle |= EMIF_REG_READ_IDLE_LEN_VAL << OMAP44XX_REG_READ_IDLE_LEN_SHIFT;
-
- return idle;
-}
-
-static u32 get_ddr_phy_ctrl_1(u32 freq, u8 RL)
-{
- u32 phy = 0, val = 0;
-
- phy |= (RL + 2) << OMAP44XX_REG_READ_LATENCY_SHIFT;
-
- if (freq <= 100000000)
- val = EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS;
- else if (freq <= 200000000)
- val = EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ;
- else
- val = EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ;
- phy |= val << OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHIFT;
-
- /* Other fields are constant magic values. Hardcode them together */
- phy |= EMIF_DDR_PHY_CTRL_1_BASE_VAL <<
- OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT;
-
- return phy;
-}
-
-static u32 get_emif_mem_size(struct emif_device_details *devices)
-{
- u32 size_mbytes = 0, temp;
-
- if (!devices)
- return 0;
-
- if (devices->cs0_device_details) {
- temp = devices->cs0_device_details->density;
- size_mbytes += lpddr2_density_2_size_in_mbytes[temp];
- }
-
- if (devices->cs1_device_details) {
- temp = devices->cs1_device_details->density;
- size_mbytes += lpddr2_density_2_size_in_mbytes[temp];
- }
- /* convert to bytes */
- return size_mbytes << 20;
-}
-
-/* Gets the encoding corresponding to a given DMM section size */
-u32 get_dmm_section_size_map(u32 section_size)
-{
- /*
- * Section size mapping:
- * 0x0: 16-MiB section
- * 0x1: 32-MiB section
- * 0x2: 64-MiB section
- * 0x3: 128-MiB section
- * 0x4: 256-MiB section
- * 0x5: 512-MiB section
- * 0x6: 1-GiB section
- * 0x7: 2-GiB section
- */
- section_size >>= 24; /* divide by 16 MB */
- return log_2_n_round_down(section_size);
-}
-
-static void emif_calculate_regs(
- const struct emif_device_details *emif_dev_details,
- u32 freq, struct emif_regs *regs)
-{
- u32 temp, sys_freq;
- const struct lpddr2_addressing *addressing;
- const struct lpddr2_ac_timings *timings;
- const struct lpddr2_min_tck *min_tck;
- const struct lpddr2_device_details *cs0_dev_details =
- emif_dev_details->cs0_device_details;
- const struct lpddr2_device_details *cs1_dev_details =
- emif_dev_details->cs1_device_details;
- const struct lpddr2_device_timings *cs0_dev_timings =
- emif_dev_details->cs0_device_timings;
-
- emif_assert(emif_dev_details);
- emif_assert(regs);
- /*
- * You can not have a device on CS1 without one on CS0
- * So configuring EMIF without a device on CS0 doesn't
- * make sense
- */
- emif_assert(cs0_dev_details);
- emif_assert(cs0_dev_details->type != LPDDR2_TYPE_NVM);
- /*
- * If there is a device on CS1 it should be same type as CS0
- * (or NVM. But NVM is not supported in this driver yet)
- */
- emif_assert((cs1_dev_details == NULL) ||
- (cs1_dev_details->type == LPDDR2_TYPE_NVM) ||
- (cs0_dev_details->type == cs1_dev_details->type));
- emif_assert(freq <= MAX_LPDDR2_FREQ);
-
- set_ddr_clk_period(freq);
-
- /*
- * The device on CS0 is used for all timing calculations
- * There is only one set of registers for timings per EMIF. So, if the
- * second CS(CS1) has a device, it should have the same timings as the
- * device on CS0
- */
- timings = get_timings_table(cs0_dev_timings->ac_timings, freq);
- emif_assert(timings);
- min_tck = cs0_dev_timings->min_tck;
-
- temp = addressing_table_index(cs0_dev_details->type,
- cs0_dev_details->density,
- cs0_dev_details->io_width);
-
- emif_assert((temp >= 0));
- addressing = &(addressing_table[temp]);
- emif_assert(addressing);
-
- sys_freq = get_sys_clk_freq();
-
- regs->sdram_config_init = get_sdram_config_reg(cs0_dev_details,
- cs1_dev_details,
- addressing, RL_BOOT);
-
- regs->sdram_config = get_sdram_config_reg(cs0_dev_details,
- cs1_dev_details,
- addressing, RL_FINAL);
-
- regs->ref_ctrl = get_sdram_ref_ctrl(freq, addressing);
-
- regs->sdram_tim1 = get_sdram_tim_1_reg(timings, min_tck, addressing);
-
- regs->sdram_tim2 = get_sdram_tim_2_reg(timings, min_tck);
-
- regs->sdram_tim3 = get_sdram_tim_3_reg(timings, min_tck, addressing);
-
- regs->read_idle_ctrl = get_read_idle_ctrl_reg(LPDDR2_VOLTAGE_STABLE);
-
- regs->temp_alert_config =
- get_temp_alert_config(cs1_dev_details, addressing, 0);
-
- regs->zq_config = get_zq_config_reg(cs1_dev_details, addressing,
- LPDDR2_VOLTAGE_STABLE);
-
- regs->emif_ddr_phy_ctlr_1_init =
- get_ddr_phy_ctrl_1(sys_freq / 2, RL_BOOT);
-
- regs->emif_ddr_phy_ctlr_1 =
- get_ddr_phy_ctrl_1(freq, RL_FINAL);
-
- regs->freq = freq;
-
- print_timing_reg(regs->sdram_config_init);
- print_timing_reg(regs->sdram_config);
- print_timing_reg(regs->ref_ctrl);
- print_timing_reg(regs->sdram_tim1);
- print_timing_reg(regs->sdram_tim2);
- print_timing_reg(regs->sdram_tim3);
- print_timing_reg(regs->read_idle_ctrl);
- print_timing_reg(regs->temp_alert_config);
- print_timing_reg(regs->zq_config);
- print_timing_reg(regs->emif_ddr_phy_ctlr_1);
- print_timing_reg(regs->emif_ddr_phy_ctlr_1_init);
-}
-#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+u32 *const T_num = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_NUM;
+u32 *const T_den = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_T_DEN;
+u32 *const emif_sizes = (u32 *)OMAP4_SRAM_SCRATCH_EMIF_SIZE;
+#endif
#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
/* Base AC Timing values specified by JESD209-2 for 400MHz operation */
@@ -691,30 +61,6 @@ static const struct lpddr2_ac_timings timings_jedec_400_mhz = {
.tFAW = 50
};
-/* Base AC Timing values specified by JESD209-2 for 333 MHz operation */
-static const struct lpddr2_ac_timings timings_jedec_333_mhz = {
- .max_freq = 333000000,
- .RL = 5,
- .tRPab = 21,
- .tRCD = 18,
- .tWR = 15,
- .tRASmin = 42,
- .tRRD = 10,
- .tWTRx2 = 15,
- .tXSR = 140,
- .tXPx2 = 15,
- .tRFCab = 130,
- .tRTPx2 = 15,
- .tCKE = 3,
- .tCKESR = 15,
- .tZQCS = 90,
- .tZQCL = 360,
- .tZQINIT = 1000,
- .tDQSCKMAXx2 = 11,
- .tRASmax = 70,
- .tFAW = 50
-};
-
/* Base AC Timing values specified by JESD209-2 for 200 MHz operation */
static const struct lpddr2_ac_timings timings_jedec_200_mhz = {
.max_freq = 200000000,
@@ -764,7 +110,6 @@ static const struct lpddr2_min_tck min_tck_jedec = {
static const struct lpddr2_ac_timings const*
jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
&timings_jedec_200_mhz,
- &timings_jedec_333_mhz,
&timings_jedec_400_mhz
};
@@ -782,473 +127,3 @@ void emif_get_device_timings(u32 emif_nr,
*cs1_device_timings = &jedec_default_timings;
}
#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
-
-#ifdef CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
-const char *get_lpddr2_type(u8 type_id)
-{
- switch (type_id) {
- case LPDDR2_TYPE_S4:
- return "LPDDR2-S4";
- case LPDDR2_TYPE_S2:
- return "LPDDR2-S2";
- default:
- return NULL;
- }
-}
-
-const char *get_lpddr2_io_width(u8 width_id)
-{
- switch (width_id) {
- case LPDDR2_IO_WIDTH_8:
- return "x8";
- case LPDDR2_IO_WIDTH_16:
- return "x16";
- case LPDDR2_IO_WIDTH_32:
- return "x32";
- default:
- return NULL;
- }
-}
-
-const char *get_lpddr2_manufacturer(u32 manufacturer)
-{
- switch (manufacturer) {
- case LPDDR2_MANUFACTURER_SAMSUNG:
- return "Samsung";
- case LPDDR2_MANUFACTURER_QIMONDA:
- return "Qimonda";
- case LPDDR2_MANUFACTURER_ELPIDA:
- return "Elpida";
- case LPDDR2_MANUFACTURER_ETRON:
- return "Etron";
- case LPDDR2_MANUFACTURER_NANYA:
- return "Nanya";
- case LPDDR2_MANUFACTURER_HYNIX:
- return "Hynix";
- case LPDDR2_MANUFACTURER_MOSEL:
- return "Mosel";
- case LPDDR2_MANUFACTURER_WINBOND:
- return "Winbond";
- case LPDDR2_MANUFACTURER_ESMT:
- return "ESMT";
- case LPDDR2_MANUFACTURER_SPANSION:
- return "Spansion";
- case LPDDR2_MANUFACTURER_SST:
- return "SST";
- case LPDDR2_MANUFACTURER_ZMOS:
- return "ZMOS";
- case LPDDR2_MANUFACTURER_INTEL:
- return "Intel";
- case LPDDR2_MANUFACTURER_NUMONYX:
- return "Numonyx";
- case LPDDR2_MANUFACTURER_MICRON:
- return "Micron";
- default:
- return NULL;
- }
-}
-
-static void display_sdram_details(u32 emif_nr, u32 cs,
- struct lpddr2_device_details *device)
-{
- const char *mfg_str;
- const char *type_str;
- char density_str[10];
- u32 density;
-
- debug("EMIF%d CS%d\t", emif_nr, cs);
-
- if (!device) {
- debug("None\n");
- return;
- }
-
- mfg_str = get_lpddr2_manufacturer(device->manufacturer);
- type_str = get_lpddr2_type(device->type);
-
- density = lpddr2_density_2_size_in_mbytes[device->density];
- if ((density / 1024 * 1024) == density) {
- density /= 1024;
- sprintf(density_str, "%d GB", density);
- } else
- sprintf(density_str, "%d MB", density);
- if (mfg_str && type_str)
- debug("%s\t\t%s\t%s\n", mfg_str, type_str, density_str);
-}
-
-static u8 is_lpddr2_sdram_present(u32 base, u32 cs,
- struct lpddr2_device_details *lpddr2_device)
-{
- u32 mr = 0, temp;
-
- mr = get_mr(base, cs, LPDDR2_MR0);
- if (mr > 0xFF) {
- /* Mode register value bigger than 8 bit */
- return 0;
- }
-
- temp = (mr & LPDDR2_MR0_DI_MASK) >> LPDDR2_MR0_DI_SHIFT;
- if (temp) {
- /* Not SDRAM */
- return 0;
- }
- temp = (mr & LPDDR2_MR0_DNVI_MASK) >> LPDDR2_MR0_DNVI_SHIFT;
-
- if (temp) {
- /* DNV supported - But DNV is only supported for NVM */
- return 0;
- }
-
- mr = get_mr(base, cs, LPDDR2_MR4);
- if (mr > 0xFF) {
- /* Mode register value bigger than 8 bit */
- return 0;
- }
-
- mr = get_mr(base, cs, LPDDR2_MR5);
- if (mr >= 0xFF) {
- /* Mode register value bigger than 8 bit */
- return 0;
- }
-
- if (!get_lpddr2_manufacturer(mr)) {
- /* Manufacturer not identified */
- return 0;
- }
- lpddr2_device->manufacturer = mr;
-
- mr = get_mr(base, cs, LPDDR2_MR6);
- if (mr >= 0xFF) {
- /* Mode register value bigger than 8 bit */
- return 0;
- }
-
- mr = get_mr(base, cs, LPDDR2_MR7);
- if (mr >= 0xFF) {
- /* Mode register value bigger than 8 bit */
- return 0;
- }
-
- mr = get_mr(base, cs, LPDDR2_MR8);
- if (mr >= 0xFF) {
- /* Mode register value bigger than 8 bit */
- return 0;
- }
-
- temp = (mr & MR8_TYPE_MASK) >> MR8_TYPE_SHIFT;
- if (!get_lpddr2_type(temp)) {
- /* Not SDRAM */
- return 0;
- }
- lpddr2_device->type = temp;
-
- temp = (mr & MR8_DENSITY_MASK) >> MR8_DENSITY_SHIFT;
- if (temp > LPDDR2_DENSITY_32Gb) {
- /* Density not supported */
- return 0;
- }
- lpddr2_device->density = temp;
-
- temp = (mr & MR8_IO_WIDTH_MASK) >> MR8_IO_WIDTH_SHIFT;
- if (!get_lpddr2_io_width(temp)) {
- /* IO width unsupported value */
- return 0;
- }
- lpddr2_device->io_width = temp;
-
- /*
- * If all the above tests pass we should
- * have a device on this chip-select
- */
- return 1;
-}
-
-struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
- struct lpddr2_device_details *lpddr2_dev_details)
-{
- u32 phy;
- u32 base = (emif_nr == 1) ? OMAP44XX_EMIF1 : OMAP44XX_EMIF2;
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
-
- if (!lpddr2_dev_details)
- return NULL;
-
- /* Do the minimum init for mode register accesses */
- if (!running_from_sdram()) {
- phy = get_ddr_phy_ctrl_1(get_sys_clk_freq() / 2, RL_BOOT);
- writel(phy, &emif->emif_ddr_phy_ctrl_1);
- }
-
- if (!(is_lpddr2_sdram_present(base, cs, lpddr2_dev_details)))
- return NULL;
-
- display_sdram_details(emif_num(base), cs, lpddr2_dev_details);
-
- return lpddr2_dev_details;
-}
-#endif /* CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION */
-
-static void do_sdram_init(u32 base)
-{
- const struct emif_regs *regs;
- u32 in_sdram, emif_nr;
-
- debug(">>do_sdram_init() %x\n", base);
-
- in_sdram = running_from_sdram();
- emif_nr = (base == OMAP44XX_EMIF1) ? 1 : 2;
-
-#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
- emif_get_reg_dump(emif_nr, &regs);
- if (!regs) {
- debug("EMIF: reg dump not provided\n");
- return;
- }
-#else
- /*
- * The user has not provided the register values. We need to
- * calculate it based on the timings and the DDR frequency
- */
- struct emif_device_details dev_details;
- struct emif_regs calculated_regs;
-
- /*
- * Get device details:
- * - Discovered if CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION is set
- * - Obtained from user otherwise
- */
- struct lpddr2_device_details cs0_dev_details, cs1_dev_details;
- emif_reset_phy(base);
- dev_details.cs0_device_details = emif_get_device_details(base, CS0,
- &cs0_dev_details);
- dev_details.cs1_device_details = emif_get_device_details(base, CS1,
- &cs1_dev_details);
- emif_reset_phy(base);
-
- /* Return if no devices on this EMIF */
- if (!dev_details.cs0_device_details &&
- !dev_details.cs1_device_details) {
- emif_sizes[emif_nr - 1] = 0;
- return;
- }
-
- if (!in_sdram)
- emif_sizes[emif_nr - 1] = get_emif_mem_size(&dev_details);
-
- /*
- * Get device timings:
- * - Default timings specified by JESD209-2 if
- * CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS is set
- * - Obtained from user otherwise
- */
- emif_get_device_timings(emif_nr, &dev_details.cs0_device_timings,
- &dev_details.cs1_device_timings);
-
- /* Calculate the register values */
- emif_calculate_regs(&dev_details, omap4_ddr_clk(), &calculated_regs);
- regs = &calculated_regs;
-#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
-
- /*
- * Initializing the LPDDR2 device can not happen from SDRAM.
- * Changing the timing registers in EMIF can happen(going from one
- * OPP to another)
- */
- if (!in_sdram)
- lpddr2_init(base, regs);
-
- /* Write to the shadow registers */
- emif_update_timings(base, regs);
-
- debug("<<do_sdram_init() %x\n", base);
-}
-
-static void emif_post_init_config(u32 base)
-{
- struct emif_reg_struct *emif = (struct emif_reg_struct *)base;
- u32 omap4_rev = omap_revision();
-
- /* reset phy on ES2.0 */
- if (omap4_rev == OMAP4430_ES2_0)
- emif_reset_phy(base);
-
- /* Put EMIF back in smart idle on ES1.0 */
- if (omap4_rev == OMAP4430_ES1_0)
- writel(0x80000000, &emif->emif_pwr_mgmt_ctrl);
-}
-
-static void dmm_init(u32 base)
-{
- const struct dmm_lisa_map_regs *lisa_map_regs;
-
-#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
- emif_get_dmm_regs(&lisa_map_regs);
-#else
- u32 emif1_size, emif2_size, mapped_size, section_map = 0;
- u32 section_cnt, sys_addr;
- struct dmm_lisa_map_regs lis_map_regs_calculated = {0};
-
- mapped_size = 0;
- section_cnt = 3;
- sys_addr = CONFIG_SYS_SDRAM_BASE;
- emif1_size = emif_sizes[0];
- emif2_size = emif_sizes[1];
- debug("emif1_size 0x%x emif2_size 0x%x\n", emif1_size, emif2_size);
-
- if (!emif1_size && !emif2_size)
- return;
-
- /* symmetric interleaved section */
- if (emif1_size && emif2_size) {
- mapped_size = min(emif1_size, emif2_size);
- section_map = DMM_LISA_MAP_INTERLEAVED_BASE_VAL;
- section_map |= 0 << OMAP44XX_SDRC_ADDR_SHIFT;
- /* only MSB */
- section_map |= (sys_addr >> 24) <<
- OMAP44XX_SYS_ADDR_SHIFT;
- section_map |= get_dmm_section_size_map(mapped_size * 2)
- << OMAP44XX_SYS_SIZE_SHIFT;
- lis_map_regs_calculated.dmm_lisa_map_3 = section_map;
- emif1_size -= mapped_size;
- emif2_size -= mapped_size;
- sys_addr += (mapped_size * 2);
- section_cnt--;
- }
-
- /*
- * Single EMIF section(we can have a maximum of 1 single EMIF
- * section- either EMIF1 or EMIF2 or none, but not both)
- */
- if (emif1_size) {
- section_map = DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL;
- section_map |= get_dmm_section_size_map(emif1_size)
- << OMAP44XX_SYS_SIZE_SHIFT;
- /* only MSB */
- section_map |= (mapped_size >> 24) <<
- OMAP44XX_SDRC_ADDR_SHIFT;
- /* only MSB */
- section_map |= (sys_addr >> 24) << OMAP44XX_SYS_ADDR_SHIFT;
- section_cnt--;
- }
- if (emif2_size) {
- section_map = DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL;
- section_map |= get_dmm_section_size_map(emif2_size) <<
- OMAP44XX_SYS_SIZE_SHIFT;
- /* only MSB */
- section_map |= mapped_size >> 24 << OMAP44XX_SDRC_ADDR_SHIFT;
- /* only MSB */
- section_map |= sys_addr >> 24 << OMAP44XX_SYS_ADDR_SHIFT;
- section_cnt--;
- }
-
- if (section_cnt == 2) {
- /* Only 1 section - either symmetric or single EMIF */
- lis_map_regs_calculated.dmm_lisa_map_3 = section_map;
- lis_map_regs_calculated.dmm_lisa_map_2 = 0;
- lis_map_regs_calculated.dmm_lisa_map_1 = 0;
- } else {
- /* 2 sections - 1 symmetric, 1 single EMIF */
- lis_map_regs_calculated.dmm_lisa_map_2 = section_map;
- lis_map_regs_calculated.dmm_lisa_map_1 = 0;
- }
-
- /* TRAP for invalid TILER mappings in section 0 */
- lis_map_regs_calculated.dmm_lisa_map_0 = DMM_LISA_MAP_0_INVAL_ADDR_TRAP;
-
- lisa_map_regs = &lis_map_regs_calculated;
-#endif
- struct dmm_lisa_map_regs *hw_lisa_map_regs =
- (struct dmm_lisa_map_regs *)base;
-
- writel(0, &hw_lisa_map_regs->dmm_lisa_map_3);
- writel(0, &hw_lisa_map_regs->dmm_lisa_map_2);
- writel(0, &hw_lisa_map_regs->dmm_lisa_map_1);
- writel(0, &hw_lisa_map_regs->dmm_lisa_map_0);
-
- writel(lisa_map_regs->dmm_lisa_map_3,
- &hw_lisa_map_regs->dmm_lisa_map_3);
- writel(lisa_map_regs->dmm_lisa_map_2,
- &hw_lisa_map_regs->dmm_lisa_map_2);
- writel(lisa_map_regs->dmm_lisa_map_1,
- &hw_lisa_map_regs->dmm_lisa_map_1);
- writel(lisa_map_regs->dmm_lisa_map_0,
- &hw_lisa_map_regs->dmm_lisa_map_0);
-
- if (omap_revision() >= OMAP4460_ES1_0) {
- hw_lisa_map_regs =
- (struct dmm_lisa_map_regs *)OMAP44XX_MA_LISA_MAP_BASE;
-
- writel(lisa_map_regs->dmm_lisa_map_3,
- &hw_lisa_map_regs->dmm_lisa_map_3);
- writel(lisa_map_regs->dmm_lisa_map_2,
- &hw_lisa_map_regs->dmm_lisa_map_2);
- writel(lisa_map_regs->dmm_lisa_map_1,
- &hw_lisa_map_regs->dmm_lisa_map_1);
- writel(lisa_map_regs->dmm_lisa_map_0,
- &hw_lisa_map_regs->dmm_lisa_map_0);
- }
-}
-
-/*
- * SDRAM initialization:
- * SDRAM initialization has two parts:
- * 1. Configuring the SDRAM device
- * 2. Update the AC timings related parameters in the EMIF module
- * (1) should be done only once and should not be done while we are
- * running from SDRAM.
- * (2) can and should be done more than once if OPP changes.
- * Particularly, this may be needed when we boot without SPL and
- * and using Configuration Header(CH). ROM code supports only at 50% OPP
- * at boot (low power boot). So u-boot has to switch to OPP100 and update
- * the frequency. So,
- * Doing (1) and (2) makes sense - first time initialization
- * Doing (2) and not (1) makes sense - OPP change (when using CH)
- * Doing (1) and not (2) doen't make sense
- * See do_sdram_init() for the details
- */
-void sdram_init(void)
-{
- u32 in_sdram, size_prog, size_detect;
-
- debug(">>sdram_init()\n");
-
- if (omap4_hw_init_context() == OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL)
- return;
-
- in_sdram = running_from_sdram();
- debug("in_sdram = %d\n", in_sdram);
-
- if (!in_sdram) {
- bypass_dpll(&prcm->cm_clkmode_dpll_core);
- }
-
- do_sdram_init(OMAP44XX_EMIF1);
- do_sdram_init(OMAP44XX_EMIF2);
-
- if (!in_sdram) {
- dmm_init(OMAP44XX_DMM_LISA_MAP_BASE);
- emif_post_init_config(OMAP44XX_EMIF1);
- emif_post_init_config(OMAP44XX_EMIF2);
-
- }
-
- /* for the shadow registers to take effect */
- freq_update_core();
-
- /* Do some testing after the init */
- if (!in_sdram) {
- size_prog = omap4_sdram_size();
- size_detect = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
- size_prog);
- /* Compare with the size programmed */
- if (size_detect != size_prog) {
- printf("SDRAM: identified size not same as expected"
- " size identified: %x expected: %x\n",
- size_detect,
- size_prog);
- } else
- debug("get_ram_size() successful");
- }
-
- debug("<<sdram_init()\n");
-}
diff --git a/arch/arm/cpu/armv7/omap4/hwinit.c b/arch/arm/cpu/armv7/omap4/hwinit.c
new file mode 100644
index 0000000..52c9b19
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/hwinit.c
@@ -0,0 +1,167 @@
+/*
+ *
+ * Common functions for OMAP4 based boards
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ * Aneesh V <aneesh@ti.com>
+ * Steve Sakoman <steve@sakoman.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/armv7.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/sizes.h>
+#include <asm/emif.h>
+#include <asm/arch/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 *const omap4_revision = (u32 *)OMAP4_SRAM_SCRATCH_OMAP4_REV;
+
+static const struct gpio_bank gpio_bank_44xx[6] = {
+ { (void *)OMAP44XX_GPIO1_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP44XX_GPIO2_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP44XX_GPIO3_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP44XX_GPIO4_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP44XX_GPIO5_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP44XX_GPIO6_BASE, METHOD_GPIO_24XX },
+};
+
+const struct gpio_bank *const omap_gpio_bank = gpio_bank_44xx;
+
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Some tuning of IOs for optimal power and performance
+ */
+void do_io_settings(void)
+{
+ u32 lpddr2io;
+ struct control_lpddr2io_regs *lpddr2io_regs =
+ (struct control_lpddr2io_regs *)LPDDR2_IO_REGS_BASE;
+ struct omap4_sys_ctrl_regs *const ctrl =
+ (struct omap4_sys_ctrl_regs *)SYSCTRL_GENERAL_CORE_BASE;
+
+ u32 omap4_rev = omap_revision();
+
+ if (omap4_rev == OMAP4430_ES1_0)
+ lpddr2io = CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN;
+ else if (omap4_rev == OMAP4430_ES2_0)
+ lpddr2io = CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER;
+ else
+ lpddr2io = CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN;
+
+ /* EMIF1 */
+ writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_0);
+ writel(lpddr2io, &lpddr2io_regs->control_lpddr2io1_1);
+ /* No pull for GR10 as per hw team's recommendation */
+ writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
+ &lpddr2io_regs->control_lpddr2io1_2);
+ writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io1_3);
+
+ /* EMIF2 */
+ writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_0);
+ writel(lpddr2io, &lpddr2io_regs->control_lpddr2io2_1);
+ /* No pull for GR10 as per hw team's recommendation */
+ writel(lpddr2io & ~LPDDR2IO_GR10_WD_MASK,
+ &lpddr2io_regs->control_lpddr2io2_2);
+ writel(CONTROL_LPDDR2IO_3_VAL, &lpddr2io_regs->control_lpddr2io2_3);
+
+ /*
+ * Some of these settings (TRIM values) come from eFuse and are
+ * in turn programmed in the eFuse at manufacturing time after
+ * calibration of the device. Do the software over-ride only if
+ * the device is not correctly trimmed
+ */
+ if (!(readl(&ctrl->control_std_fuse_opp_bgap) & 0xFFFF)) {
+
+ writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
+ &ctrl->control_ldosram_iva_voltage_ctrl);
+
+ writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
+ &ctrl->control_ldosram_mpu_voltage_ctrl);
+
+ writel(LDOSRAM_VOLT_CTRL_OVERRIDE,
+ &ctrl->control_ldosram_core_voltage_ctrl);
+ }
+
+ if (!readl(&ctrl->control_efuse_1))
+ writel(CONTROL_EFUSE_1_OVERRIDE, &ctrl->control_efuse_1);
+
+ if (!readl(&ctrl->control_efuse_2))
+ writel(CONTROL_EFUSE_2_OVERRIDE, &ctrl->control_efuse_2);
+}
+#endif
+
+void init_omap_revision(void)
+{
+ /*
+ * For some of the ES2/ES1 boards ID_CODE is not reliable:
+ * Also, ES1 and ES2 have different ARM revisions
+ * So use ARM revision for identification
+ */
+ unsigned int arm_rev = cortex_rev();
+
+ switch (arm_rev) {
+ case MIDR_CORTEX_A9_R0P1:
+ *omap4_revision = OMAP4430_ES1_0;
+ break;
+ case MIDR_CORTEX_A9_R1P2:
+ switch (readl(CONTROL_ID_CODE)) {
+ case OMAP4_CONTROL_ID_CODE_ES2_0:
+ *omap4_revision = OMAP4430_ES2_0;
+ break;
+ case OMAP4_CONTROL_ID_CODE_ES2_1:
+ *omap4_revision = OMAP4430_ES2_1;
+ break;
+ case OMAP4_CONTROL_ID_CODE_ES2_2:
+ *omap4_revision = OMAP4430_ES2_2;
+ break;
+ default:
+ *omap4_revision = OMAP4430_ES2_0;
+ break;
+ }
+ break;
+ case MIDR_CORTEX_A9_R1P3:
+ *omap4_revision = OMAP4430_ES2_3;
+ break;
+ case MIDR_CORTEX_A9_R2P10:
+ *omap4_revision = OMAP4460_ES1_0;
+ break;
+ default:
+ *omap4_revision = OMAP4430_SILICON_ID_INVALID;
+ break;
+ }
+}
+
+#ifndef CONFIG_SYS_L2CACHE_OFF
+void v7_outer_cache_enable(void)
+{
+ set_pl310_ctrl_reg(1);
+}
+
+void v7_outer_cache_disable(void)
+{
+ set_pl310_ctrl_reg(0);
+}
+#endif
diff --git a/arch/arm/cpu/armv7/omap4/omap4_mux_data.h b/arch/arm/cpu/armv7/omap4/omap4_mux_data.h
deleted file mode 100644
index b940391..0000000
--- a/arch/arm/cpu/armv7/omap4/omap4_mux_data.h
+++ /dev/null
@@ -1,83 +0,0 @@
- /*
- * (C) Copyright 2010
- * Texas Instruments Incorporated, <www.ti.com>
- *
- * Balaji Krishnamoorthy <balajitk@ti.com>
- * Aneesh V <aneesh@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef _OMAP4_MUX_DATA_H_
-#define _OMAP4_MUX_DATA_H_
-
-#include <asm/arch/mux_omap4.h>
-
-const struct pad_conf_entry core_padconf_array_essential[] = {
-
-{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
-{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
-{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
-{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
-{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
-{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
-{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
-{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
-{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
-{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
-{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
-{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
-{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
-{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
-{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
-{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
-{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
-{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
-{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
-{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
-{I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
-{I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
-{I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
-{I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
-{I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
-{I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
-{I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
-{I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */
-{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
-{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
-{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
-{UART3_TX_IRTX, (M0)} /* uart3_tx */
-
-};
-
-const struct pad_conf_entry wkup_padconf_array_essential[] = {
-
-{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
-{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
-{PAD1_SYS_32K, (IEN | M0)} /* sys_32k */
-
-};
-
-const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
-
-{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7, TPS */
-
-};
-
-
-#endif /* _OMAP4_MUX_DATA_H_ */
diff --git a/arch/arm/cpu/armv7/omap4/sdram_elpida.c b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
index edc5326..a5ec7d3 100644
--- a/arch/arm/cpu/armv7/omap4/sdram_elpida.c
+++ b/arch/arm/cpu/armv7/omap4/sdram_elpida.c
@@ -26,7 +26,7 @@
* MA 02111-1307 USA
*/
-#include <asm/arch/emif.h>
+#include <asm/emif.h>
#include <asm/arch/sys_proto.h>
/*
diff --git a/arch/arm/cpu/armv7/omap5/Makefile b/arch/arm/cpu/armv7/omap5/Makefile
new file mode 100644
index 0000000..f8ca9ac
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2000-2010
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+COBJS += hwinit.o
+COBJS += clocks.o
+COBJS += emif.o
+COBJS += sdram_elpida.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c
new file mode 100644
index 0000000..dd882a2
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/clocks.c
@@ -0,0 +1,432 @@
+/*
+ *
+ * Clock initialization for OMAP5
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * Based on previous work by:
+ * Santosh Shilimkar <santosh.shilimkar@ti.com>
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+#include <asm/omap_gpio.h>
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * printing to console doesn't work unless
+ * this code is executed from SPL
+ */
+#define printf(fmt, args...)
+#define puts(s)
+#endif
+
+struct omap5_prcm_regs *const prcm = (struct omap5_prcm_regs *)0x4A004100;
+
+const u32 sys_clk_array[8] = {
+ 12000000, /* 12 MHz */
+ 0, /* NA */
+ 16800000, /* 16.8 MHz */
+ 19200000, /* 19.2 MHz */
+ 26000000, /* 26 MHz */
+ 0, /* NA */
+ 38400000, /* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
+ {125, 0, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {625, 6, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {625, 7, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {750, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {625, 15, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_2ghz[NUM_SYS_CLKS] = {
+ {500, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {2024, 16, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {625, 5, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {1000, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {625, 11, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = {
+ {275, 2, 1, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {1375, 20, 1, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {1375, 23, 1, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {550, 12, 1, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {1375, 47, 1, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_550mhz[NUM_SYS_CLKS] = {
+ {275, 2, 2, -1, -1, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {1375, 20, 2, -1, -1, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {1375, 23, 2, -1, -1, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {550, 12, 2, -1, -1, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {1375, 47, 2, -1, -1, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+static const struct dpll_params
+ core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = {
+ {266, 2, 1, 5, 8, 4, 62, 5, 5, 7}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {570, 8, 1, 5, 8, 4, 62, 5, 5, 7}, /* 16.8 MHz */
+ {665, 11, 1, 5, 8, 4, 62, 5, 5, 7}, /* 19.2 MHz */
+ {532, 12, 1, 5, 8, 4, 62, 5, 5, 7}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {665, 23, 1, 5, 8, 4, 62, 5, 5, 7} /* 38.4 MHz */
+};
+
+static const struct dpll_params
+ core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = {
+ {266, 2, 2, 5, 8, 4, 62, 5, 5, 7}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {570, 8, 2, 5, 8, 4, 62, 5, 5, 7}, /* 16.8 MHz */
+ {665, 11, 2, 5, 8, 4, 62, 5, 5, 7}, /* 19.2 MHz */
+ {532, 12, 2, 5, 8, 4, 62, 5, 5, 7}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {665, 23, 2, 5, 8, 4, 62, 5, 5, 7} /* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = {
+ {32, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 12 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {160, 6, 4, 3, 6, 4, -1, 2, -1, -1}, /* 16.8 MHz */
+ {20, 0, 4, 3, 6, 4, -1, 2, -1, -1}, /* 19.2 MHz */
+ {192, 12, 4, 3, 6, 4, -1, 2, -1, -1}, /* 26 MHz */
+ {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {10, 0, 4, 3, 6, 4, -1, 2, -1, -1} /* 38.4 MHz */
+};
+
+static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
+ {931, 11, -1, -1, 4, 7, -1, -1}, /* 12 MHz */
+ {931, 12, -1, -1, 4, 7, -1, -1}, /* 13 MHz */
+ {665, 11, -1, -1, 4, 7, -1, -1}, /* 16.8 MHz */
+ {727, 14, -1, -1, 4, 7, -1, -1}, /* 19.2 MHz */
+ {931, 25, -1, -1, 4, 7, -1, -1}, /* 26 MHz */
+ {931, 26, -1, -1, 4, 7, -1, -1}, /* 27 MHz */
+ {412, 16, -1, -1, 4, 7, -1, -1} /* 38.4 MHz */
+};
+
+/* ABE M & N values with sys_clk as source */
+static const struct dpll_params
+ abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
+ {49, 5, 1, 1, -1, -1, -1, -1}, /* 12 MHz */
+ {68, 8, 1, 1, -1, -1, -1, -1}, /* 13 MHz */
+ {35, 5, 1, 1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {46, 8, 1, 1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {34, 8, 1, 1, -1, -1, -1, -1}, /* 26 MHz */
+ {29, 7, 1, 1, -1, -1, -1, -1}, /* 27 MHz */
+ {64, 24, 1, 1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+/* ABE M & N values with 32K clock as source */
+static const struct dpll_params abe_dpll_params_32k_196608khz = {
+ 750, 0, 1, 1, -1, -1, -1, -1
+};
+
+static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
+ {80, 0, 2, -1, -1, -1, -1, -1}, /* 12 MHz */
+ {960, 12, 2, -1, -1, -1, -1, -1}, /* 13 MHz */
+ {400, 6, 2, -1, -1, -1, -1, -1}, /* 16.8 MHz */
+ {50, 0, 2, -1, -1, -1, -1, -1}, /* 19.2 MHz */
+ {480, 12, 2, -1, -1, -1, -1, -1}, /* 26 MHz */
+ {320, 8, 2, -1, -1, -1, -1, -1}, /* 27 MHz */
+ {25, 0, 2, -1, -1, -1, -1, -1} /* 38.4 MHz */
+};
+
+void setup_post_dividers(u32 *const base, const struct dpll_params *params)
+{
+ struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+ /* Setup post-dividers */
+ if (params->m2 >= 0)
+ writel(params->m2, &dpll_regs->cm_div_m2_dpll);
+ if (params->m3 >= 0)
+ writel(params->m3, &dpll_regs->cm_div_m3_dpll);
+ if (params->h11 >= 0)
+ writel(params->h11, &dpll_regs->cm_div_h11_dpll);
+ if (params->h12 >= 0)
+ writel(params->h12, &dpll_regs->cm_div_h12_dpll);
+ if (params->h13 >= 0)
+ writel(params->h13, &dpll_regs->cm_div_h13_dpll);
+ if (params->h14 >= 0)
+ writel(params->h14, &dpll_regs->cm_div_h14_dpll);
+ if (params->h22 >= 0)
+ writel(params->h22, &dpll_regs->cm_div_h22_dpll);
+ if (params->h23 >= 0)
+ writel(params->h23, &dpll_regs->cm_div_h23_dpll);
+}
+
+const struct dpll_params *get_mpu_dpll_params(void)
+{
+ u32 sysclk_ind = get_sys_clk_index();
+ return &mpu_dpll_params_1100mhz[sysclk_ind];
+}
+
+const struct dpll_params *get_core_dpll_params(void)
+{
+ u32 sysclk_ind = get_sys_clk_index();
+
+ /* Configuring the DDR to be at 532mhz */
+ return &core_dpll_params_2128mhz_ddr266[sysclk_ind];
+
+}
+
+const struct dpll_params *get_per_dpll_params(void)
+{
+ u32 sysclk_ind = get_sys_clk_index();
+ return &per_dpll_params_768mhz[sysclk_ind];
+}
+
+const struct dpll_params *get_iva_dpll_params(void)
+{
+ u32 sysclk_ind = get_sys_clk_index();
+ return &iva_dpll_params_2330mhz[sysclk_ind];
+}
+
+const struct dpll_params *get_usb_dpll_params(void)
+{
+ u32 sysclk_ind = get_sys_clk_index();
+ return &usb_dpll_params_1920mhz[sysclk_ind];
+}
+
+const struct dpll_params *get_abe_dpll_params(void)
+{
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+ u32 sysclk_ind = get_sys_clk_index();
+ return &abe_dpll_params_sysclk_196608khz[sysclk_ind];
+#else
+ return &abe_dpll_params_32k_196608khz;
+#endif
+}
+
+/*
+ * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
+ * We set the maximum voltages allowed here because Smart-Reflex is not
+ * enabled in bootloader. Voltage initialization in the kernel will set
+ * these to the nominal values after enabling Smart-Reflex
+ */
+void scale_vcores(void)
+{
+ u32 volt;
+
+ setup_sri2c();
+
+ /* Enable 1.22V from TPS for vdd_mpu */
+ volt = 1220;
+ do_scale_tps62361(TPS62361_REG_ADDR_SET1, volt);
+
+ /* VCORE 1 - for vdd_core */
+ volt = 1000;
+ do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
+
+ /* VCORE 2 - for vdd_MM */
+ volt = 1125;
+ do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt);
+}
+
+/*
+ * Enable essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_basic_clocks(void)
+{
+ u32 *const clk_domains_essential[] = {
+ &prcm->cm_l4per_clkstctrl,
+ &prcm->cm_l3init_clkstctrl,
+ &prcm->cm_memif_clkstctrl,
+ &prcm->cm_l4cfg_clkstctrl,
+ 0
+ };
+
+ u32 *const clk_modules_hw_auto_essential[] = {
+ &prcm->cm_memif_emif_1_clkctrl,
+ &prcm->cm_memif_emif_2_clkctrl,
+ &prcm->cm_l4cfg_l4_cfg_clkctrl,
+ &prcm->cm_wkup_gpio1_clkctrl,
+ &prcm->cm_l4per_gpio2_clkctrl,
+ &prcm->cm_l4per_gpio3_clkctrl,
+ &prcm->cm_l4per_gpio4_clkctrl,
+ &prcm->cm_l4per_gpio5_clkctrl,
+ &prcm->cm_l4per_gpio6_clkctrl,
+ 0
+ };
+
+ u32 *const clk_modules_explicit_en_essential[] = {
+ &prcm->cm_wkup_gptimer1_clkctrl,
+ &prcm->cm_l3init_hsmmc1_clkctrl,
+ &prcm->cm_l3init_hsmmc2_clkctrl,
+ &prcm->cm_l4per_gptimer2_clkctrl,
+ &prcm->cm_wkup_wdtimer2_clkctrl,
+ &prcm->cm_l4per_uart3_clkctrl,
+ &prcm->cm_l4per_i2c1_clkctrl,
+ 0
+ };
+
+ /* Enable optional additional functional clock for GPIO4 */
+ setbits_le32(&prcm->cm_l4per_gpio4_clkctrl,
+ GPIO4_CLKCTRL_OPTFCLKEN_MASK);
+
+ /* Enable 96 MHz clock for MMC1 & MMC2 */
+ setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl,
+ HSMMC_CLKCTRL_CLKSEL_MASK);
+ setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl,
+ HSMMC_CLKCTRL_CLKSEL_MASK);
+
+ /* Select 32KHz clock as the source of GPTIMER1 */
+ setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl,
+ GPTIMER1_CLKCTRL_CLKSEL_MASK);
+
+ do_enable_clocks(clk_domains_essential,
+ clk_modules_hw_auto_essential,
+ clk_modules_explicit_en_essential,
+ 1);
+}
+
+void enable_basic_uboot_clocks(void)
+{
+ u32 *const clk_domains_essential[] = {
+ 0
+ };
+
+ u32 *const clk_modules_hw_auto_essential[] = {
+ 0
+ };
+
+ u32 *const clk_modules_explicit_en_essential[] = {
+ &prcm->cm_l4per_mcspi1_clkctrl,
+ &prcm->cm_l4per_i2c2_clkctrl,
+ &prcm->cm_l4per_i2c3_clkctrl,
+ &prcm->cm_l4per_i2c4_clkctrl,
+ 0
+ };
+
+ do_enable_clocks(clk_domains_essential,
+ clk_modules_hw_auto_essential,
+ clk_modules_explicit_en_essential,
+ 1);
+}
+
+/*
+ * Enable non-essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_non_essential_clocks(void)
+{
+ u32 *const clk_domains_non_essential[] = {
+ &prcm->cm_mpu_m3_clkstctrl,
+ &prcm->cm_ivahd_clkstctrl,
+ &prcm->cm_dsp_clkstctrl,
+ &prcm->cm_dss_clkstctrl,
+ &prcm->cm_sgx_clkstctrl,
+ &prcm->cm1_abe_clkstctrl,
+ &prcm->cm_c2c_clkstctrl,
+ &prcm->cm_cam_clkstctrl,
+ &prcm->cm_dss_clkstctrl,
+ &prcm->cm_sdma_clkstctrl,
+ 0
+ };
+
+ u32 *const clk_modules_hw_auto_non_essential[] = {
+ &prcm->cm_mpu_m3_mpu_m3_clkctrl,
+ &prcm->cm_ivahd_ivahd_clkctrl,
+ &prcm->cm_ivahd_sl2_clkctrl,
+ &prcm->cm_dsp_dsp_clkctrl,
+ &prcm->cm_l3_2_gpmc_clkctrl,
+ &prcm->cm_l3instr_l3_3_clkctrl,
+ &prcm->cm_l3instr_l3_instr_clkctrl,
+ &prcm->cm_l3instr_intrconn_wp1_clkctrl,
+ &prcm->cm_l3init_hsi_clkctrl,
+ &prcm->cm_l3init_hsusbtll_clkctrl,
+ 0
+ };
+
+ u32 *const clk_modules_explicit_en_non_essential[] = {
+ &prcm->cm1_abe_aess_clkctrl,
+ &prcm->cm1_abe_pdm_clkctrl,
+ &prcm->cm1_abe_dmic_clkctrl,
+ &prcm->cm1_abe_mcasp_clkctrl,
+ &prcm->cm1_abe_mcbsp1_clkctrl,
+ &prcm->cm1_abe_mcbsp2_clkctrl,
+ &prcm->cm1_abe_mcbsp3_clkctrl,
+ &prcm->cm1_abe_slimbus_clkctrl,
+ &prcm->cm1_abe_timer5_clkctrl,
+ &prcm->cm1_abe_timer6_clkctrl,
+ &prcm->cm1_abe_timer7_clkctrl,
+ &prcm->cm1_abe_timer8_clkctrl,
+ &prcm->cm1_abe_wdt3_clkctrl,
+ &prcm->cm_l4per_gptimer9_clkctrl,
+ &prcm->cm_l4per_gptimer10_clkctrl,
+ &prcm->cm_l4per_gptimer11_clkctrl,
+ &prcm->cm_l4per_gptimer3_clkctrl,
+ &prcm->cm_l4per_gptimer4_clkctrl,
+ &prcm->cm_l4per_hdq1w_clkctrl,
+ &prcm->cm_l4per_mcspi2_clkctrl,
+ &prcm->cm_l4per_mcspi3_clkctrl,
+ &prcm->cm_l4per_mcspi4_clkctrl,
+ &prcm->cm_l4per_mmcsd3_clkctrl,
+ &prcm->cm_l4per_mmcsd4_clkctrl,
+ &prcm->cm_l4per_mmcsd5_clkctrl,
+ &prcm->cm_l4per_uart1_clkctrl,
+ &prcm->cm_l4per_uart2_clkctrl,
+ &prcm->cm_l4per_uart4_clkctrl,
+ &prcm->cm_wkup_keyboard_clkctrl,
+ &prcm->cm_wkup_wdtimer2_clkctrl,
+ &prcm->cm_cam_iss_clkctrl,
+ &prcm->cm_cam_fdif_clkctrl,
+ &prcm->cm_dss_dss_clkctrl,
+ &prcm->cm_sgx_sgx_clkctrl,
+ &prcm->cm_l3init_hsusbhost_clkctrl,
+ &prcm->cm_l3init_fsusb_clkctrl,
+ 0
+ };
+
+ /* Enable optional functional clock for ISS */
+ setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
+
+ /* Enable all optional functional clocks of DSS */
+ setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
+
+ do_enable_clocks(clk_domains_non_essential,
+ clk_modules_hw_auto_non_essential,
+ clk_modules_explicit_en_non_essential,
+ 0);
+
+ /* Put camera module in no sleep mode */
+ clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK,
+ CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
+ MODULE_CLKCTRL_MODULEMODE_SHIFT);
+}
diff --git a/arch/arm/cpu/armv7/omap5/config.mk b/arch/arm/cpu/armv7/omap5/config.mk
new file mode 100644
index 0000000..639f699
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/config.mk
@@ -0,0 +1,28 @@
+#
+# Copyright 2011 Linaro Limited
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# Aneesh V <annesh@ti.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+ifdef CONFIG_SPL_BUILD
+ALL-y += $(OBJTREE)/MLO
+else
+ALL-y += $(obj)u-boot.img
+endif
diff --git a/arch/arm/cpu/armv7/omap5/emif.c b/arch/arm/cpu/armv7/omap5/emif.c
new file mode 100644
index 0000000..8019ffe
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/emif.c
@@ -0,0 +1,105 @@
+/*
+ * EMIF programming
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com> for OMAP4
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define print_timing_reg(reg) debug(#reg" - 0x%08x\n", (reg))
+static u32 *const T_num = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_NUM;
+static u32 *const T_den = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_T_DEN;
+static u32 *const emif_sizes = (u32 *)OMAP5_SRAM_SCRATCH_EMIF_SIZE;
+#endif
+
+#ifdef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+/* Base AC Timing values specified by JESD209-2 for 532MHz operation */
+static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
+ .max_freq = 532000000,
+ .RL = 8,
+ .tRPab = 21,
+ .tRCD = 18,
+ .tWR = 15,
+ .tRASmin = 42,
+ .tRRD = 10,
+ .tWTRx2 = 15,
+ .tXSR = 140,
+ .tXPx2 = 15,
+ .tRFCab = 130,
+ .tRTPx2 = 15,
+ .tCKE = 3,
+ .tCKESR = 15,
+ .tZQCS = 90,
+ .tZQCL = 360,
+ .tZQINIT = 1000,
+ .tDQSCKMAXx2 = 11,
+ .tRASmax = 70,
+ .tFAW = 50
+};
+
+/*
+ * Min tCK values specified by JESD209-2
+ * Min tCK specifies the minimum duration of some AC timing parameters in terms
+ * of the number of cycles. If the calculated number of cycles based on the
+ * absolute time value is less than the min tCK value, min tCK value should
+ * be used instead. This typically happens at low frequencies.
+ */
+static const struct lpddr2_min_tck min_tck_jedec = {
+ .tRL = 3,
+ .tRP_AB = 3,
+ .tRCD = 3,
+ .tWR = 3,
+ .tRAS_MIN = 3,
+ .tRRD = 2,
+ .tWTR = 2,
+ .tXP = 2,
+ .tRTP = 2,
+ .tCKE = 3,
+ .tCKESR = 3,
+ .tFAW = 8
+};
+
+static const struct lpddr2_ac_timings const*
+ jedec_ac_timings[MAX_NUM_SPEEDBINS] = {
+ &timings_jedec_532_mhz
+};
+
+static const struct lpddr2_device_timings jedec_default_timings = {
+ .ac_timings = jedec_ac_timings,
+ .min_tck = &min_tck_jedec
+};
+
+void emif_get_device_timings(u32 emif_nr,
+ const struct lpddr2_device_timings **cs0_device_timings,
+ const struct lpddr2_device_timings **cs1_device_timings)
+{
+ /* Assume Identical devices on EMIF1 & EMIF2 */
+ *cs0_device_timings = &jedec_default_timings;
+ *cs1_device_timings = NULL;
+}
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
diff --git a/arch/arm/cpu/armv7/omap5/hwinit.c b/arch/arm/cpu/armv7/omap5/hwinit.c
new file mode 100644
index 0000000..fa8e390
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/hwinit.c
@@ -0,0 +1,78 @@
+/*
+ *
+ * Functions for omap5 based boards.
+ *
+ * (C) Copyright 2011
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ * Aneesh V <aneesh@ti.com>
+ * Steve Sakoman <steve@sakoman.com>
+ * Sricharan <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/armv7.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/sizes.h>
+#include <asm/utils.h>
+#include <asm/arch/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 *const omap5_revision = (u32 *)OMAP5_SRAM_SCRATCH_OMAP5_REV;
+
+static struct gpio_bank gpio_bank_54xx[6] = {
+ { (void *)OMAP54XX_GPIO1_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP54XX_GPIO2_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP54XX_GPIO3_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP54XX_GPIO4_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP54XX_GPIO5_BASE, METHOD_GPIO_24XX },
+ { (void *)OMAP54XX_GPIO6_BASE, METHOD_GPIO_24XX },
+};
+
+const struct gpio_bank *const omap_gpio_bank = gpio_bank_54xx;
+
+#ifdef CONFIG_SPL_BUILD
+/*
+ * Some tuning of IOs for optimal power and performance
+ */
+void do_io_settings(void)
+{
+}
+#endif
+
+void init_omap_revision(void)
+{
+ /*
+ * For some of the ES2/ES1 boards ID_CODE is not reliable:
+ * Also, ES1 and ES2 have different ARM revisions
+ * So use ARM revision for identification
+ */
+ unsigned int rev = cortex_rev();
+
+ switch (rev) {
+ case MIDR_CORTEX_A15_R0P0:
+ *omap5_revision = OMAP5430_ES1_0;
+ default:
+ *omap5_revision = OMAP5430_SILICON_ID_INVALID;
+ }
+}
diff --git a/arch/arm/cpu/armv7/omap5/sdram_elpida.c b/arch/arm/cpu/armv7/omap5/sdram_elpida.c
new file mode 100644
index 0000000..ad198e6
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap5/sdram_elpida.c
@@ -0,0 +1,178 @@
+/*
+ * Timing and Organization details of the Elpida parts used in OMAP5
+ * EVM
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm/emif.h>
+#include <asm/arch/sys_proto.h>
+
+/*
+ * This file provides details of the LPDDR2 SDRAM parts used on OMAP5
+ * EVM. Since the parts used and geometry are identical for
+ * evm for a given OMAP5 revision, this information is kept
+ * here instead of being in board directory. However the key functions
+ * exported are weakly linked so that they can be over-ridden in the board
+ * directory if there is a OMAP5 board in the future that uses a different
+ * memory device or geometry.
+ *
+ * For any new board with different memory devices over-ride one or more
+ * of the following functions as per the CONFIG flags you intend to enable:
+ * - emif_get_reg_dump()
+ * - emif_get_dmm_regs()
+ * - emif_get_device_details()
+ * - emif_get_device_timings()
+ */
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+
+const struct emif_regs emif_regs_elpida_532_mhz_1cs = {
+ .sdram_config_init = 0x80801aB2,
+ .sdram_config = 0x808022B2,
+ .ref_ctrl = 0x0000081A,
+ .sdram_tim1 = 0x772F6873,
+ .sdram_tim2 = 0x304A129A,
+ .sdram_tim3 = 0x02F7E45F,
+ .read_idle_ctrl = 0x00050000,
+ .zq_config = 0x000B3215,
+ .temp_alert_config = 0x08000A05,
+ .emif_ddr_phy_ctlr_1_init = 0x0E38200D,
+ .emif_ddr_phy_ctlr_1 = 0x0E38200D
+};
+
+const struct dmm_lisa_map_regs lisa_map_4G_x_1_x_2 = {
+ .dmm_lisa_map_0 = 0xFF020100,
+ .dmm_lisa_map_1 = 0,
+ .dmm_lisa_map_2 = 0,
+ .dmm_lisa_map_3 = 0x80640300
+};
+
+static void emif_get_reg_dump_sdp(u32 emif_nr, const struct emif_regs **regs)
+{
+ *regs = &emif_regs_elpida_532_mhz_1cs;
+}
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+ __attribute__((weak, alias("emif_get_reg_dump_sdp")));
+
+static void emif_get_dmm_regs_sdp(const struct dmm_lisa_map_regs
+ **dmm_lisa_regs)
+{
+ *dmm_lisa_regs = &lisa_map_4G_x_1_x_2;
+}
+
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
+ __attribute__((weak, alias("emif_get_dmm_regs_sdp")));
+
+#else
+
+static const struct lpddr2_device_details elpida_4G_S4_details = {
+ .type = LPDDR2_TYPE_S4,
+ .density = LPDDR2_DENSITY_4Gb,
+ .io_width = LPDDR2_IO_WIDTH_32,
+ .manufacturer = LPDDR2_MANUFACTURER_ELPIDA
+};
+
+static void emif_get_device_details_sdp(u32 emif_nr,
+ struct lpddr2_device_details *cs0_device_details,
+ struct lpddr2_device_details *cs1_device_details)
+{
+ /* EMIF1 & EMIF2 have identical configuration */
+ *cs0_device_details = elpida_4G_S4_details;
+
+ /* Nothing is conected on cs1 */
+ cs1_device_details = NULL;
+}
+
+void emif_get_device_details(u32 emif_nr,
+ struct lpddr2_device_details *cs0_device_details,
+ struct lpddr2_device_details *cs1_device_details)
+ __attribute__((weak, alias("emif_get_device_details_sdp")));
+
+#endif /* CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS */
+
+#ifndef CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+static const struct lpddr2_ac_timings timings_jedec_532_mhz = {
+ .max_freq = 532000000,
+ .RL = 8,
+ .tRPab = 21,
+ .tRCD = 18,
+ .tWR = 15,
+ .tRASmin = 42,
+ .tRRD = 10,
+ .tWTRx2 = 15,
+ .tXSR = 140,
+ .tXPx2 = 15,
+ .tRFCab = 130,
+ .tRTPx2 = 15,
+ .tCKE = 3,
+ .tCKESR = 15,
+ .tZQCS = 90,
+ .tZQCL = 360,
+ .tZQINIT = 1000,
+ .tDQSCKMAXx2 = 11,
+ .tRASmax = 70,
+ .tFAW = 50
+};
+
+static const struct lpddr2_min_tck min_tck_elpida = {
+ .tRL = 3,
+ .tRP_AB = 3,
+ .tRCD = 3,
+ .tWR = 3,
+ .tRAS_MIN = 3,
+ .tRRD = 2,
+ .tWTR = 2,
+ .tXP = 2,
+ .tRTP = 2,
+ .tCKE = 3,
+ .tCKESR = 3,
+ .tFAW = 8
+};
+
+static const struct lpddr2_ac_timings *elpida_ac_timings[MAX_NUM_SPEEDBINS] = {
+ &timings_jedec_532_mhz
+};
+
+static const struct lpddr2_device_timings elpida_4G_S4_timings = {
+ .ac_timings = elpida_ac_timings,
+ .min_tck = &min_tck_elpida,
+};
+
+void emif_get_device_timings_sdp(u32 emif_nr,
+ const struct lpddr2_device_timings **cs0_device_timings,
+ const struct lpddr2_device_timings **cs1_device_timings)
+{
+ /* Identical devices on EMIF1 & EMIF2 */
+ *cs0_device_timings = &elpida_4G_S4_timings;
+ *cs1_device_timings = NULL;
+}
+
+void emif_get_device_timings(u32 emif_nr,
+ const struct lpddr2_device_timings **cs0_device_timings,
+ const struct lpddr2_device_timings **cs1_device_timings)
+ __attribute__((weak, alias("emif_get_device_timings_sdp")));
+
+#endif /* CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS */
diff --git a/arch/arm/include/asm/arch-davinci/aintc_defs.h b/arch/arm/include/asm/arch-davinci/aintc_defs.h
index 8f37053..38f814c 100644
--- a/arch/arm/include/asm/arch-davinci/aintc_defs.h
+++ b/arch/arm/include/asm/arch-davinci/aintc_defs.h
@@ -47,4 +47,6 @@ struct dv_aintc_regs {
#define dv_aintc_regs ((struct dv_aintc_regs *)DAVINCI_ARM_INTC_BASE)
+#define DV_AINTC_INTCTL_IDMODE (1 << 2)
+
#endif /* _DV_AINTC_DEFS_H_ */
diff --git a/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h b/arch/arm/include/asm/arch-davinci/da850_lowlevel.h
index 0bc7f76..e489c47 100644
--- a/arch/arm/include/asm/arch-davinci/am1808_lowlevel.h
+++ b/arch/arm/include/asm/arch-davinci/da850_lowlevel.h
@@ -1,5 +1,5 @@
/*
- * SoC-specific lowlevel code for AM1808 and similar chips
+ * SoC-specific lowlevel code for DA850
*
* Copyright (C) 2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
@@ -21,24 +21,24 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-#ifndef __AM1808_LOWLEVEL_H
-#define __AM1808_LOWLEVEL_H
+#ifndef __DA850_LOWLEVEL_H
+#define __DA850_LOWLEVEL_H
/* NOR Boot Configuration Word Field Descriptions */
-#define AM1808_NORBOOT_COPY_XK(X) ((X - 1) << 8)
-#define AM1808_NORBOOT_METHOD_DIRECT (1 << 4)
-#define AM1808_NORBOOT_16BIT (1 << 0)
+#define DA850_NORBOOT_COPY_XK(X) ((X - 1) << 8)
+#define DA850_NORBOOT_METHOD_DIRECT (1 << 4)
+#define DA850_NORBOOT_16BIT (1 << 0)
#define dv_maskbits(addr, val) \
writel((readl(addr) & val), addr)
-void am1808_waitloop(unsigned long loopcnt);
-int am1808_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult);
-void am1808_lpc_transition(unsigned char pscnum, unsigned char module,
+void da850_waitloop(unsigned long loopcnt);
+int da850_pll_init(struct davinci_pllc_regs *reg, unsigned long pllmult);
+void da850_lpc_transition(unsigned char pscnum, unsigned char module,
unsigned char domain, unsigned char state);
-int am1808_ddr_setup(unsigned int freq);
-void am1808_psc_init(void);
-void am1808_pinmux_ctl(unsigned long offset, unsigned long mask,
+int da850_ddr_setup(void);
+void da850_psc_init(void);
+void da850_pinmux_ctl(unsigned long offset, unsigned long mask,
unsigned long value);
-#endif /* #ifndef __AM1808_LOWLEVEL_H */
+#endif /* #ifndef __DA850_LOWLEVEL_H */
diff --git a/arch/arm/include/asm/arch-davinci/ddr2_defs.h b/arch/arm/include/asm/arch-davinci/ddr2_defs.h
index 1b9430c..4f943b8 100644
--- a/arch/arm/include/asm/arch-davinci/ddr2_defs.h
+++ b/arch/arm/include/asm/arch-davinci/ddr2_defs.h
@@ -63,6 +63,7 @@ struct dv_ddr2_regs_ctrl {
#define DV_DDR_SDTMR2_RASMAX_SHIFT 27
#define DV_DDR_SDTMR2_XP_SHIFT 25
+#define DV_DDR_SDTMR2_ODT_SHIFT 23
#define DV_DDR_SDTMR2_XSNR_SHIFT 16
#define DV_DDR_SDTMR2_XSRD_SHIFT 8
#define DV_DDR_SDTMR2_RTP_SHIFT 5
@@ -84,6 +85,9 @@ struct dv_ddr2_regs_ctrl {
#define DV_DDR_SDCR_IBANK_SHIFT 4
#define DV_DDR_SDCR_PAGESIZE_SHIFT 0
+#define DV_DDR_SDRCR_LPMODEN (1 << 31)
+#define DV_DDR_SDRCR_MCLKSTOPEN (1 << 30)
+
#define DV_DDR_SRCR_LPMODEN_SHIFT 31
#define DV_DDR_SRCR_MCLKSTOPEN_SHIFT 30
diff --git a/arch/arm/include/asm/arch-davinci/emif_defs.h b/arch/arm/include/asm/arch-davinci/emif_defs.h
index b48ec17..b9e78a5 100644
--- a/arch/arm/include/asm/arch-davinci/emif_defs.h
+++ b/arch/arm/include/asm/arch-davinci/emif_defs.h
@@ -70,6 +70,7 @@ struct davinci_emif_regs {
#define DAVINCI_NANDFCR_1BIT_ECC_START(n) (1 << (8 + (n-2)))
#define DAVINCI_NANDFCR_4BIT_ECC_START (1 << 12)
#define DAVINCI_NANDFCR_4BIT_CALC_START (1 << 13)
+#define DAVINCI_NANDFCR_CS2NAND (1 << 0)
/* Chip Select setup */
#define DAVINCI_ABCR_STROBE_SELECT (1 << 31)
diff --git a/arch/arm/include/asm/arch-davinci/hardware.h b/arch/arm/include/asm/arch-davinci/hardware.h
index bea1499..3e9a3b6 100644
--- a/arch/arm/include/asm/arch-davinci/hardware.h
+++ b/arch/arm/include/asm/arch-davinci/hardware.h
@@ -230,6 +230,9 @@ typedef volatile unsigned int * dv_reg_p;
#define DAVINCI_LPSC_CFG5 38
#define DAVINCI_LPSC_GEM 39
#define DAVINCI_LPSC_IMCOP 40
+#define DAVINCI_LPSC_VPSSMASTER 47
+#define DAVINCI_LPSC_MJCP 50
+#define DAVINCI_LPSC_HDVICP 51
#define DAVINCI_DM646X_LPSC_EMAC 14
#define DAVINCI_DM646X_LPSC_UART0 26
@@ -385,6 +388,20 @@ struct davinci_psc_regs {
#define PINMUX3 0x01c4000c
#define PINMUX4 0x01c40010
+struct davinci_uart_ctrl_regs {
+ dv_reg revid1;
+ dv_reg res;
+ dv_reg pwremu_mgmt;
+ dv_reg mdr;
+};
+
+#define DAVINCI_UART_CTRL_BASE 0x28
+
+/* UART PWREMU_MGMT definitions */
+#define DAVINCI_UART_PWREMU_MGMT_FREE (1 << 0)
+#define DAVINCI_UART_PWREMU_MGMT_URRST (1 << 13)
+#define DAVINCI_UART_PWREMU_MGMT_UTRST (1 << 14)
+
#else /* CONFIG_SOC_DA8XX */
struct davinci_pllc_regs {
@@ -431,6 +448,7 @@ struct davinci_pllc_regs {
enum davinci_clk_ids {
DAVINCI_SPI0_CLKID = 2,
DAVINCI_UART2_CLKID = 2,
+ DAVINCI_MMC_CLKID = 2,
DAVINCI_MDIO_CLKID = 4,
DAVINCI_ARM_CLKID = 6,
DAVINCI_PLLM_CLKID = 0xff,
@@ -468,6 +486,7 @@ struct davinci_syscfg_regs {
#define DAVINCI_SYSCFG_SUSPSRC_SPI0 (1 << 21)
#define DAVINCI_SYSCFG_SUSPSRC_SPI1 (1 << 22)
#define DAVINCI_SYSCFG_SUSPSRC_UART0 (1 << 18)
+#define DAVINCI_SYSCFG_SUSPSRC_UART2 (1 << 20)
#define DAVINCI_SYSCFG_SUSPSRC_TIMER0 (1 << 27)
struct davinci_syscfg1_regs {
@@ -491,6 +510,9 @@ struct davinci_syscfg1_regs {
#define VTP_READY (1 << 15)
#define VTP_IOPWRDWN (1 << 14)
+#define DV_SYSCFG_KICK0_UNLOCK 0x83e70b13
+#define DV_SYSCFG_KICK1_UNLOCK 0x95a4f1e0
+
/* Interrupt controller */
struct davinci_aintc_regs {
dv_reg revid;
diff --git a/arch/arm/include/asm/arch-davinci/pll_defs.h b/arch/arm/include/asm/arch-davinci/pll_defs.h
index 5c30953..f1396e3 100644
--- a/arch/arm/include/asm/arch-davinci/pll_defs.h
+++ b/arch/arm/include/asm/arch-davinci/pll_defs.h
@@ -57,11 +57,24 @@ struct dv_pll_regs {
unsigned int plldiv9; /* 0x174 */
};
+#define PLL_MASTER_LOCK (1 << 4)
+
+#define PLLCTL_CLOCK_MODE_SHIFT 8
#define PLLCTL_PLLEN (1 << 0)
#define PLLCTL_PLLPWRDN (1 << 1)
#define PLLCTL_PLLRST (1 << 3)
+#define PLLCTL_PLLDIS (1 << 4)
#define PLLCTL_PLLENSRC (1 << 5)
#define PLLCTL_RES_9 (1 << 8)
+#define PLLCTL_EXTCLKSRC (1 << 9)
+
+#define PLL_POSTDEN (1 << 15)
+
+#define PLL_SCSCFG3_DIV45PENA (1 << 2)
+#define PLL_SCSCFG3_EMA_CLKSRC (1 << 1)
+
+#define PLL_RSTYPE_POR (1 << 0)
+#define PLL_RSTYPE_XWRST (1 << 1)
#define PLLSECCTL_TINITZ (1 << 16)
#define PLLSECCTL_TENABLE (1 << 17)
@@ -69,6 +82,7 @@ struct dv_pll_regs {
#define PLLSECCTL_STOPMODE (1 << 22)
#define PLLCMD_GOSET (1 << 0)
+#define PLLCMD_GOSTAT (1 << 0)
#define PLL0_LOCK 0x07000000
#define PLL1_LOCK 0x07000000
diff --git a/arch/arm/include/asm/arch-mx28/clock.h b/arch/arm/include/asm/arch-mx28/clock.h
new file mode 100644
index 0000000..1700fe3
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/clock.h
@@ -0,0 +1,61 @@
+/*
+ * Freescale i.MX28 Clock
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __CLOCK_H__
+#define __CLOCK_H__
+
+enum mxc_clock {
+ MXC_ARM_CLK = 0,
+ MXC_AHB_CLK,
+ MXC_IPG_CLK,
+ MXC_EMI_CLK,
+ MXC_GPMI_CLK,
+ MXC_IO0_CLK,
+ MXC_IO1_CLK,
+ MXC_SSP0_CLK,
+ MXC_SSP1_CLK,
+ MXC_SSP2_CLK,
+ MXC_SSP3_CLK,
+};
+
+enum mxs_ioclock {
+ MXC_IOCLK0 = 0,
+ MXC_IOCLK1,
+};
+
+enum mxs_sspclock {
+ MXC_SSPCLK0 = 0,
+ MXC_SSPCLK1,
+ MXC_SSPCLK2,
+ MXC_SSPCLK3,
+};
+
+uint32_t mxc_get_clock(enum mxc_clock clk);
+
+void mx28_set_ioclk(enum mxs_ioclock io, uint32_t freq);
+void mx28_set_sspclk(enum mxs_sspclock ssp, uint32_t freq, int xtal);
+void mx28_set_ssp_busclock(unsigned int bus, uint32_t freq);
+
+/* Compatibility with the FEC Ethernet driver */
+#define imx_get_fecclk() mxc_get_clock(MXC_AHB_CLK)
+
+#endif /* __CLOCK_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/dma.h b/arch/arm/include/asm/arch-mx28/dma.h
new file mode 100644
index 0000000..7061e7c
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/dma.h
@@ -0,0 +1,170 @@
+/*
+ * Freescale i.MX28 APBH DMA
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __DMA_H__
+#define __DMA_H__
+
+#include <linux/list.h>
+
+#ifndef CONFIG_ARCH_DMA_PIO_WORDS
+#define DMA_PIO_WORDS 15
+#else
+#define DMA_PIO_WORDS CONFIG_ARCH_DMA_PIO_WORDS
+#endif
+
+#define MXS_DMA_ALIGNMENT 32
+
+/*
+ * MXS DMA channels
+ */
+enum {
+ MXS_DMA_CHANNEL_AHB_APBH_SSP0 = 0,
+ MXS_DMA_CHANNEL_AHB_APBH_SSP1,
+ MXS_DMA_CHANNEL_AHB_APBH_SSP2,
+ MXS_DMA_CHANNEL_AHB_APBH_SSP3,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI0,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI1,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI2,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI3,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI4,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI5,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI6,
+ MXS_DMA_CHANNEL_AHB_APBH_GPMI7,
+ MXS_DMA_CHANNEL_AHB_APBH_SSP,
+ MXS_MAX_DMA_CHANNELS,
+};
+
+/*
+ * MXS DMA hardware command.
+ *
+ * This structure describes the in-memory layout of an entire DMA command,
+ * including space for the maximum number of PIO accesses. See the appropriate
+ * reference manual for a detailed description of what these fields mean to the
+ * DMA hardware.
+ */
+#define MXS_DMA_DESC_COMMAND_MASK 0x3
+#define MXS_DMA_DESC_COMMAND_OFFSET 0
+#define MXS_DMA_DESC_COMMAND_NO_DMAXFER 0x0
+#define MXS_DMA_DESC_COMMAND_DMA_WRITE 0x1
+#define MXS_DMA_DESC_COMMAND_DMA_READ 0x2
+#define MXS_DMA_DESC_COMMAND_DMA_SENSE 0x3
+#define MXS_DMA_DESC_CHAIN (1 << 2)
+#define MXS_DMA_DESC_IRQ (1 << 3)
+#define MXS_DMA_DESC_NAND_LOCK (1 << 4)
+#define MXS_DMA_DESC_NAND_WAIT_4_READY (1 << 5)
+#define MXS_DMA_DESC_DEC_SEM (1 << 6)
+#define MXS_DMA_DESC_WAIT4END (1 << 7)
+#define MXS_DMA_DESC_HALT_ON_TERMINATE (1 << 8)
+#define MXS_DMA_DESC_TERMINATE_FLUSH (1 << 9)
+#define MXS_DMA_DESC_PIO_WORDS_MASK (0xf << 12)
+#define MXS_DMA_DESC_PIO_WORDS_OFFSET 12
+#define MXS_DMA_DESC_BYTES_MASK (0xffff << 16)
+#define MXS_DMA_DESC_BYTES_OFFSET 16
+
+struct mxs_dma_cmd {
+ unsigned long next;
+ unsigned long data;
+ union {
+ dma_addr_t address;
+ unsigned long alternate;
+ };
+ unsigned long pio_words[DMA_PIO_WORDS];
+};
+
+/*
+ * MXS DMA command descriptor.
+ *
+ * This structure incorporates an MXS DMA hardware command structure, along
+ * with metadata.
+ */
+#define MXS_DMA_DESC_FIRST (1 << 0)
+#define MXS_DMA_DESC_LAST (1 << 1)
+#define MXS_DMA_DESC_READY (1 << 31)
+
+struct mxs_dma_desc {
+ struct mxs_dma_cmd cmd;
+ unsigned int flags;
+ dma_addr_t address;
+ void *buffer;
+ struct list_head node;
+};
+
+/**
+ * MXS DMA channel
+ *
+ * This structure represents a single DMA channel. The MXS platform code
+ * maintains an array of these structures to represent every DMA channel in the
+ * system (see mxs_dma_channels).
+ */
+#define MXS_DMA_FLAGS_IDLE 0
+#define MXS_DMA_FLAGS_BUSY (1 << 0)
+#define MXS_DMA_FLAGS_FREE 0
+#define MXS_DMA_FLAGS_ALLOCATED (1 << 16)
+#define MXS_DMA_FLAGS_VALID (1 << 31)
+
+struct mxs_dma_chan {
+ const char *name;
+ unsigned long dev;
+ struct mxs_dma_device *dma;
+ unsigned int flags;
+ unsigned int active_num;
+ unsigned int pending_num;
+ struct list_head active;
+ struct list_head done;
+};
+
+/* Hardware management ops */
+int mxs_dma_enable(int channel);
+int mxs_dma_disable(int channel);
+int mxs_dma_reset(int channel);
+int mxs_dma_freeze(int channel);
+int mxs_dma_unfreeze(int channel);
+int mxs_dma_read_semaphore(int channel);
+int mxs_dma_enable_irq(int channel, int enable);
+int mxs_dma_irq_is_pending(int channel);
+int mxs_dma_ack_irq(int channel);
+
+/* Channel management ops */
+int mxs_dma_request(int channel);
+int mxs_dma_release(int channel);
+
+/* Descriptor management ops */
+struct mxs_dma_desc *mxs_dma_desc_alloc(void);
+void mxs_dma_desc_free(struct mxs_dma_desc *);
+
+unsigned int mxs_dma_cmd_address(struct mxs_dma_desc *desc);
+int mxs_dma_desc_pending(struct mxs_dma_desc *pdesc);
+
+int mxs_dma_desc_append(int channel, struct mxs_dma_desc *pdesc);
+
+int mxs_dma_get_finished(int channel, struct list_head *head);
+int mxs_dma_finish(int channel, struct list_head *head);
+
+int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan);
+int mxs_dma_go(int chan);
+
+int mxs_dma_init(void);
+
+#endif /* __DMA_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/gpio.h b/arch/arm/include/asm/arch-mx28/gpio.h
new file mode 100644
index 0000000..be1c944
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/gpio.h
@@ -0,0 +1,32 @@
+/*
+ * Freescale i.MX28 GPIO
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_GPIO_H__
+#define __MX28_GPIO_H__
+
+#ifdef CONFIG_MXS_GPIO
+void mxs_gpio_init(void);
+#else
+inline void mxs_gpio_init(void) {}
+#endif
+
+#endif /* __MX28_GPIO_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/imx-regs.h b/arch/arm/include/asm/arch-mx28/imx-regs.h
new file mode 100644
index 0000000..9561b5e
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/imx-regs.h
@@ -0,0 +1,39 @@
+/*
+ * Freescale i.MX28 Registers
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __IMX_REGS_H__
+#define __IMX_REGS_H__
+
+#include <asm/arch/regs-apbh.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-bch.h>
+#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/regs-gpmi.h>
+#include <asm/arch/regs-i2c.h>
+#include <asm/arch/regs-ocotp.h>
+#include <asm/arch/regs-pinctrl.h>
+#include <asm/arch/regs-power.h>
+#include <asm/arch/regs-rtc.h>
+#include <asm/arch/regs-ssp.h>
+#include <asm/arch/regs-timrot.h>
+
+#endif /* __IMX_REGS_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/iomux-mx28.h b/arch/arm/include/asm/arch-mx28/iomux-mx28.h
new file mode 100644
index 0000000..b42820d
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/iomux-mx28.h
@@ -0,0 +1,537 @@
+/*
+ * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#ifndef __MACH_IOMUX_MX28_H__
+#define __MACH_IOMUX_MX28_H__
+
+#include <asm/arch/iomux.h>
+
+/*
+ * The naming convention for the pad modes is MX28_PAD_<padname>__<padmode>
+ * If <padname> or <padmode> refers to a GPIO, it is named GPIO_<unit>_<num>
+ * See also iomux.h
+ *
+ * BANK PIN MUX
+ */
+/* MUXSEL_0 */
+#define MX28_PAD_GPMI_D00__GPMI_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D01__GPMI_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D02__GPMI_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D03__GPMI_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D04__GPMI_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D05__GPMI_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D06__GPMI_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_D07__GPMI_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE0N__GPMI_CE0N MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE1N__GPMI_CE1N MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE2N__GPMI_CE2N MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CE3N__GPMI_CE3N MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY0__GPMI_READY0 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY1__GPMI_READY1 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY2__GPMI_READY2 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDY3__GPMI_READY3 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RDN__GPMI_RDN MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_WRN__GPMI_WRN MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_ALE__GPMI_ALE MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_CLE__GPMI_CLE MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_0)
+#define MX28_PAD_GPMI_RESETN__GPMI_RESETN MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_0)
+
+#define MX28_PAD_LCD_D00__LCD_D0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D01__LCD_D1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D02__LCD_D2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D03__LCD_D3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D04__LCD_D4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D05__LCD_D5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D06__LCD_D6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D07__LCD_D7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D08__LCD_D8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D09__LCD_D9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D10__LCD_D10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D11__LCD_D11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D12__LCD_D12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D13__LCD_D13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D14__LCD_D14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D15__LCD_D15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D16__LCD_D16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D17__LCD_D17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D18__LCD_D18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D19__LCD_D19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D20__LCD_D20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D21__LCD_D21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D22__LCD_D22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_D23__LCD_D23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RD_E__LCD_RD_E MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_WR_RWN__LCD_WR_RWN MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RS__LCD_RS MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_CS__LCD_CS MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_VSYNC__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_HSYNC__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_DOTCLK__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_ENABLE__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_0)
+
+#define MX28_PAD_SSP0_DATA0__SSP0_D0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA1__SSP0_D1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA2__SSP0_D2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA3__SSP0_D3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA4__SSP0_D4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA5__SSP0_D5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA6__SSP0_D6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DATA7__SSP0_D7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_CMD__SSP0_CMD MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_0)
+#define MX28_PAD_SSP0_SCK__SSP0_SCK MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_SCK__SSP1_SCK MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_CMD__SSP1_CMD MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_DATA0__SSP1_D0 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_0)
+#define MX28_PAD_SSP1_DATA3__SSP1_D3 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SCK__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_MOSI__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_MISO__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS0__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS1__SSP2_D4 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_0)
+#define MX28_PAD_SSP2_SS2__SSP2_D5 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_SCK__SSP3_SCK MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_MOSI__SSP3_CMD MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_MISO__SSP3_D0 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_0)
+#define MX28_PAD_SSP3_SS0__SSP3_D3 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_0)
+
+#define MX28_PAD_AUART0_RX__AUART0_RX MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_TX__AUART0_TX MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_CTS__AUART0_CTS MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_0)
+#define MX28_PAD_AUART0_RTS__AUART0_RTS MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_RX__AUART1_RX MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_TX__AUART1_TX MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_CTS__AUART1_CTS MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_0)
+#define MX28_PAD_AUART1_RTS__AUART1_RTS MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_RX__AUART2_RX MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_TX__AUART2_TX MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_CTS__AUART2_CTS MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_0)
+#define MX28_PAD_AUART2_RTS__AUART2_RTS MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_RX__AUART3_RX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_TX__AUART3_TX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_CTS__AUART3_CTS MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_0)
+#define MX28_PAD_AUART3_RTS__AUART3_RTS MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_0)
+#define MX28_PAD_PWM0__PWM_0 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_0)
+#define MX28_PAD_PWM1__PWM_1 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_0)
+#define MX28_PAD_PWM2__PWM_2 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_MCLK__SAIF0_MCLK MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_0)
+#define MX28_PAD_I2C0_SCL__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_0)
+#define MX28_PAD_I2C0_SDA__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_0)
+#define MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_0)
+#define MX28_PAD_SPDIF__SPDIF_TX MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_0)
+#define MX28_PAD_PWM3__PWM_3 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_0)
+#define MX28_PAD_PWM4__PWM_4 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_0)
+#define MX28_PAD_LCD_RESET__LCD_RESET MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_0)
+
+#define MX28_PAD_ENET0_MDC__ENET0_MDC MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_MDIO__ENET0_MDIO MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RX_EN__ENET0_RX_EN MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD0__ENET0_RXD0 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD1__ENET0_RXD1 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TX_CLK__ENET0_TX_CLK MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TX_EN__ENET0_TX_EN MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD0__ENET0_TXD0 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD1__ENET0_TXD1 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD2__ENET0_RXD2 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RXD3__ENET0_RXD3 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD2__ENET0_TXD2 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_TXD3__ENET0_TXD3 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_CLK MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_COL__ENET0_COL MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_0)
+#define MX28_PAD_ENET0_CRS__ENET0_CRS MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_0)
+#define MX28_PAD_ENET_CLK__CLKCTRL_ENET MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_0)
+#define MX28_PAD_JTAG_RTCK__JTAG_RTCK MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_0)
+
+#define MX28_PAD_EMI_D00__EMI_DATA0 MXS_IOMUX_PAD_NAKED(5, 0, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D01__EMI_DATA1 MXS_IOMUX_PAD_NAKED(5, 1, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D02__EMI_DATA2 MXS_IOMUX_PAD_NAKED(5, 2, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D03__EMI_DATA3 MXS_IOMUX_PAD_NAKED(5, 3, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D04__EMI_DATA4 MXS_IOMUX_PAD_NAKED(5, 4, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D05__EMI_DATA5 MXS_IOMUX_PAD_NAKED(5, 5, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D06__EMI_DATA6 MXS_IOMUX_PAD_NAKED(5, 6, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D07__EMI_DATA7 MXS_IOMUX_PAD_NAKED(5, 7, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D08__EMI_DATA8 MXS_IOMUX_PAD_NAKED(5, 8, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D09__EMI_DATA9 MXS_IOMUX_PAD_NAKED(5, 9, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D10__EMI_DATA10 MXS_IOMUX_PAD_NAKED(5, 10, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D11__EMI_DATA11 MXS_IOMUX_PAD_NAKED(5, 11, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D12__EMI_DATA12 MXS_IOMUX_PAD_NAKED(5, 12, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D13__EMI_DATA13 MXS_IOMUX_PAD_NAKED(5, 13, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D14__EMI_DATA14 MXS_IOMUX_PAD_NAKED(5, 14, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_D15__EMI_DATA15 MXS_IOMUX_PAD_NAKED(5, 15, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_ODT0__EMI_ODT0 MXS_IOMUX_PAD_NAKED(5, 16, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQM0__EMI_DQM0 MXS_IOMUX_PAD_NAKED(5, 17, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_ODT1__EMI_ODT1 MXS_IOMUX_PAD_NAKED(5, 18, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQM1__EMI_DQM1 MXS_IOMUX_PAD_NAKED(5, 19, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK MXS_IOMUX_PAD_NAKED(5, 20, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CLK__EMI_CLK MXS_IOMUX_PAD_NAKED(5, 21, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQS0__EMI_DQS0 MXS_IOMUX_PAD_NAKED(5, 22, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DQS1__EMI_DQS1 MXS_IOMUX_PAD_NAKED(5, 23, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN MXS_IOMUX_PAD_NAKED(5, 26, PAD_MUXSEL_0)
+
+#define MX28_PAD_EMI_A00__EMI_ADDR0 MXS_IOMUX_PAD_NAKED(6, 0, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A01__EMI_ADDR1 MXS_IOMUX_PAD_NAKED(6, 1, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A02__EMI_ADDR2 MXS_IOMUX_PAD_NAKED(6, 2, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A03__EMI_ADDR3 MXS_IOMUX_PAD_NAKED(6, 3, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A04__EMI_ADDR4 MXS_IOMUX_PAD_NAKED(6, 4, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A05__EMI_ADDR5 MXS_IOMUX_PAD_NAKED(6, 5, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A06__EMI_ADDR6 MXS_IOMUX_PAD_NAKED(6, 6, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A07__EMI_ADDR7 MXS_IOMUX_PAD_NAKED(6, 7, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A08__EMI_ADDR8 MXS_IOMUX_PAD_NAKED(6, 8, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A09__EMI_ADDR9 MXS_IOMUX_PAD_NAKED(6, 9, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A10__EMI_ADDR10 MXS_IOMUX_PAD_NAKED(6, 10, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A11__EMI_ADDR11 MXS_IOMUX_PAD_NAKED(6, 11, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A12__EMI_ADDR12 MXS_IOMUX_PAD_NAKED(6, 12, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A13__EMI_ADDR13 MXS_IOMUX_PAD_NAKED(6, 13, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_A14__EMI_ADDR14 MXS_IOMUX_PAD_NAKED(6, 14, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA0__EMI_BA0 MXS_IOMUX_PAD_NAKED(6, 16, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA1__EMI_BA1 MXS_IOMUX_PAD_NAKED(6, 17, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_BA2__EMI_BA2 MXS_IOMUX_PAD_NAKED(6, 18, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CASN__EMI_CASN MXS_IOMUX_PAD_NAKED(6, 19, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_RASN__EMI_RASN MXS_IOMUX_PAD_NAKED(6, 20, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_WEN__EMI_WEN MXS_IOMUX_PAD_NAKED(6, 21, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CE0N__EMI_CE0N MXS_IOMUX_PAD_NAKED(6, 22, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CE1N__EMI_CE1N MXS_IOMUX_PAD_NAKED(6, 23, PAD_MUXSEL_0)
+#define MX28_PAD_EMI_CKE__EMI_CKE MXS_IOMUX_PAD_NAKED(6, 24, PAD_MUXSEL_0)
+
+/* MUXSEL_1 */
+#define MX28_PAD_GPMI_D00__SSP1_D0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D01__SSP1_D1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D02__SSP1_D2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D03__SSP1_D3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D04__SSP1_D4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D05__SSP1_D5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D06__SSP1_D6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_D07__SSP1_D7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE0N__SSP3_D0 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE1N__SSP3_D3 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE2N__CAN1_TX MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CE3N__CAN1_RX MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY1__SSP1_CMD MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY2__CAN0_TX MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDY3__CAN0_RX MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RDN__SSP3_SCK MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_WRN__SSP1_SCK MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_ALE__SSP3_D1 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_CLE__SSP3_D2 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_1)
+#define MX28_PAD_GPMI_RESETN__SSP3_CMD MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_1)
+
+#define MX28_PAD_LCD_D03__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D04__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D08__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D09__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D20__ENET1_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D21__ENET1_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D22__ENET1_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_D23__ENET1_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RD_E__LCD_VSYNC MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_WR_RWN__LCD_HSYNC MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RS__LCD_DOTCLK MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_CS__LCD_ENABLE MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_VSYNC__SAIF1_SDATA0 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_HSYNC__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_DOTCLK__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_1)
+
+#define MX28_PAD_SSP0_DATA4__SSP2_D0 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA5__SSP2_D3 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA6__SSP2_CMD MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_1)
+#define MX28_PAD_SSP0_DATA7__SSP2_SCK MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_SCK__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_CMD__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_DATA0__SSP2_D6 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_1)
+#define MX28_PAD_SSP1_DATA3__SSP2_D7 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SCK__AUART2_RX MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_MOSI__AUART2_TX MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_MISO__AUART3_RX MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS0__AUART3_TX MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS1__SSP2_D1 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_1)
+#define MX28_PAD_SSP2_SS2__SSP2_D2 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_SCK__AUART4_TX MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_MOSI__AUART4_RX MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_MISO__AUART4_RTS MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_1)
+#define MX28_PAD_SSP3_SS0__AUART4_CTS MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_1)
+
+#define MX28_PAD_AUART0_RX__I2C0_SCL MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_TX__I2C0_SDA MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_CTS__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_1)
+#define MX28_PAD_AUART0_RTS__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_RX__SSP2_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_TX__SSP3_CARD_DETECT MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_CTS__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_1)
+#define MX28_PAD_AUART1_RTS__USB0_ID MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_RX__SSP3_D1 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_TX__SSP3_D2 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_CTS__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_1)
+#define MX28_PAD_AUART2_RTS__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_RX__CAN0_TX MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_TX__CAN0_RX MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_CTS__CAN1_TX MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_1)
+#define MX28_PAD_AUART3_RTS__CAN1_RX MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_1)
+#define MX28_PAD_PWM0__I2C1_SCL MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_1)
+#define MX28_PAD_PWM1__I2C1_SDA MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_1)
+#define MX28_PAD_PWM2__USB0_ID MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_MCLK__PWM_3 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_LRCLK__PWM_4 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_BITCLK__PWM_5 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF0_SDATA0__PWM_6 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_1)
+#define MX28_PAD_I2C0_SCL__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_1)
+#define MX28_PAD_I2C0_SDA__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_1)
+#define MX28_PAD_SAIF1_SDATA0__PWM_7 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_1)
+#define MX28_PAD_LCD_RESET__LCD_VSYNC MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_1)
+
+#define MX28_PAD_ENET0_MDC__GPMI_CE4N MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_MDIO__GPMI_CE5N MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RX_EN__GPMI_CE6N MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD0__GPMI_CE7N MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD1__GPMI_READY4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TX_CLK__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TX_EN__GPMI_READY5 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD0__GPMI_READY6 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD1__GPMI_READY7 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD2__ENET1_RXD0 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RXD3__ENET1_RXD1 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD2__ENET1_TXD0 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_TXD3__ENET1_TXD1 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_COL__ENET1_TX_EN MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_1)
+#define MX28_PAD_ENET0_CRS__ENET1_RX_EN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_1)
+
+/* MUXSEL_2 */
+#define MX28_PAD_GPMI_CE2N__ENET0_RX_ER MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_CE3N__SAIF1_MCLK MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY0__USB0_ID MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY2__ENET0_TX_ER MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_RDY3__HSADC_TRIGGER MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_ALE__SSP3_D4 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_2)
+#define MX28_PAD_GPMI_CLE__SSP3_D5 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_LCD_D00__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D01__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D02__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D03__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D04__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D05__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D06__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D07__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D08__ETM_DA8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D09__ETM_DA9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D10__ETM_DA10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D11__ETM_DA11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D12__ETM_DA12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D13__ETM_DA13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D14__ETM_DA14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D15__ETM_DA15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D16__ETM_DA7 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D17__ETM_DA6 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D18__ETM_DA5 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D19__ETM_DA4 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D20__ETM_DA3 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D21__ETM_DA2 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D22__ETM_DA1 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_D23__ETM_DA0 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_RD_E__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_WR_RWN__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_HSYNC__ETM_TCTL MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_2)
+#define MX28_PAD_LCD_DOTCLK__ETM_TCLK MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_2)
+
+#define MX28_PAD_SSP1_SCK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_CMD__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_DATA0__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_2)
+#define MX28_PAD_SSP1_DATA3__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SCK__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_MOSI__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_MISO__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS1__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_2)
+#define MX28_PAD_SSP2_SS2__USB0_OVERCURRENT MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_SCK__ENET1_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_MOSI__ENET1_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_MISO__ENET1_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_2)
+#define MX28_PAD_SSP3_SS0__ENET1_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_AUART0_RX__DUART_CTS MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_TX__DUART_RTS MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_CTS__DUART_RX MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_2)
+#define MX28_PAD_AUART0_RTS__DUART_TX MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_RX__PWM_0 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_TX__PWM_1 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_CTS__TIMROT_ROTARYA MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_2)
+#define MX28_PAD_AUART1_RTS__TIMROT_ROTARYB MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_RX__SSP3_D4 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_TX__SSP3_D5 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_CTS__SAIF1_BITCLK MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_2)
+#define MX28_PAD_AUART2_RTS__SAIF1_LRCLK MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_RX__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_TX__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_CTS__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_2)
+#define MX28_PAD_AUART3_RTS__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_2)
+#define MX28_PAD_PWM0__DUART_RX MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_2)
+#define MX28_PAD_PWM1__DUART_TX MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_2)
+#define MX28_PAD_PWM2__USB1_OVERCURRENT MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_MCLK__AUART4_CTS MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_LRCLK__AUART4_RTS MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_BITCLK__AUART4_RX MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF0_SDATA0__AUART4_TX MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_2)
+#define MX28_PAD_I2C0_SCL__DUART_RX MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_2)
+#define MX28_PAD_I2C0_SDA__DUART_TX MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_2)
+#define MX28_PAD_SAIF1_SDATA0__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_2)
+#define MX28_PAD_SPDIF__ENET1_RX_ER MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_2)
+
+#define MX28_PAD_ENET0_MDC__SAIF0_SDATA1 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_MDIO__SAIF0_SDATA2 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RX_EN__SAIF1_SDATA1 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD0__SAIF1_SDATA2 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TX_CLK__ENET0_1588_EVENT2_OUT MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD2__ENET0_1588_EVENT0_OUT MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RXD3__ENET0_1588_EVENT0_IN MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TXD2__ENET0_1588_EVENT1_OUT MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_TXD3__ENET0_1588_EVENT1_IN MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_RX_CLK__ENET0_1588_EVENT2_IN MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_COL__ENET0_1588_EVENT3_OUT MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_2)
+#define MX28_PAD_ENET0_CRS__ENET0_1588_EVENT3_IN MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_2)
+
+/* MUXSEL_GPIO */
+#define MX28_PAD_GPMI_D00__GPIO_0_0 MXS_IOMUX_PAD_NAKED(0, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D01__GPIO_0_1 MXS_IOMUX_PAD_NAKED(0, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D02__GPIO_0_2 MXS_IOMUX_PAD_NAKED(0, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D03__GPIO_0_3 MXS_IOMUX_PAD_NAKED(0, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D04__GPIO_0_4 MXS_IOMUX_PAD_NAKED(0, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D05__GPIO_0_5 MXS_IOMUX_PAD_NAKED(0, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D06__GPIO_0_6 MXS_IOMUX_PAD_NAKED(0, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_D07__GPIO_0_7 MXS_IOMUX_PAD_NAKED(0, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE0N__GPIO_0_16 MXS_IOMUX_PAD_NAKED(0, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE1N__GPIO_0_17 MXS_IOMUX_PAD_NAKED(0, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE2N__GPIO_0_18 MXS_IOMUX_PAD_NAKED(0, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CE3N__GPIO_0_19 MXS_IOMUX_PAD_NAKED(0, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY0__GPIO_0_20 MXS_IOMUX_PAD_NAKED(0, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY1__GPIO_0_21 MXS_IOMUX_PAD_NAKED(0, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY2__GPIO_0_22 MXS_IOMUX_PAD_NAKED(0, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDY3__GPIO_0_23 MXS_IOMUX_PAD_NAKED(0, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RDN__GPIO_0_24 MXS_IOMUX_PAD_NAKED(0, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_WRN__GPIO_0_25 MXS_IOMUX_PAD_NAKED(0, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_ALE__GPIO_0_26 MXS_IOMUX_PAD_NAKED(0, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_CLE__GPIO_0_27 MXS_IOMUX_PAD_NAKED(0, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_GPMI_RESETN__GPIO_0_28 MXS_IOMUX_PAD_NAKED(0, 28, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_LCD_D00__GPIO_1_0 MXS_IOMUX_PAD_NAKED(1, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D01__GPIO_1_1 MXS_IOMUX_PAD_NAKED(1, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D02__GPIO_1_2 MXS_IOMUX_PAD_NAKED(1, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D03__GPIO_1_3 MXS_IOMUX_PAD_NAKED(1, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D04__GPIO_1_4 MXS_IOMUX_PAD_NAKED(1, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D05__GPIO_1_5 MXS_IOMUX_PAD_NAKED(1, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D06__GPIO_1_6 MXS_IOMUX_PAD_NAKED(1, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D07__GPIO_1_7 MXS_IOMUX_PAD_NAKED(1, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D08__GPIO_1_8 MXS_IOMUX_PAD_NAKED(1, 8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D09__GPIO_1_9 MXS_IOMUX_PAD_NAKED(1, 9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D10__GPIO_1_10 MXS_IOMUX_PAD_NAKED(1, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D11__GPIO_1_11 MXS_IOMUX_PAD_NAKED(1, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D12__GPIO_1_12 MXS_IOMUX_PAD_NAKED(1, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D13__GPIO_1_13 MXS_IOMUX_PAD_NAKED(1, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D14__GPIO_1_14 MXS_IOMUX_PAD_NAKED(1, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D15__GPIO_1_15 MXS_IOMUX_PAD_NAKED(1, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D16__GPIO_1_16 MXS_IOMUX_PAD_NAKED(1, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D17__GPIO_1_17 MXS_IOMUX_PAD_NAKED(1, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D18__GPIO_1_18 MXS_IOMUX_PAD_NAKED(1, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D19__GPIO_1_19 MXS_IOMUX_PAD_NAKED(1, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D20__GPIO_1_20 MXS_IOMUX_PAD_NAKED(1, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D21__GPIO_1_21 MXS_IOMUX_PAD_NAKED(1, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D22__GPIO_1_22 MXS_IOMUX_PAD_NAKED(1, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_D23__GPIO_1_23 MXS_IOMUX_PAD_NAKED(1, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RD_E__GPIO_1_24 MXS_IOMUX_PAD_NAKED(1, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_WR_RWN__GPIO_1_25 MXS_IOMUX_PAD_NAKED(1, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RS__GPIO_1_26 MXS_IOMUX_PAD_NAKED(1, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_CS__GPIO_1_27 MXS_IOMUX_PAD_NAKED(1, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_VSYNC__GPIO_1_28 MXS_IOMUX_PAD_NAKED(1, 28, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_HSYNC__GPIO_1_29 MXS_IOMUX_PAD_NAKED(1, 29, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_DOTCLK__GPIO_1_30 MXS_IOMUX_PAD_NAKED(1, 30, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_ENABLE__GPIO_1_31 MXS_IOMUX_PAD_NAKED(1, 31, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_SSP0_DATA0__GPIO_2_0 MXS_IOMUX_PAD_NAKED(2, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA1__GPIO_2_1 MXS_IOMUX_PAD_NAKED(2, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA2__GPIO_2_2 MXS_IOMUX_PAD_NAKED(2, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA3__GPIO_2_3 MXS_IOMUX_PAD_NAKED(2, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA4__GPIO_2_4 MXS_IOMUX_PAD_NAKED(2, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA5__GPIO_2_5 MXS_IOMUX_PAD_NAKED(2, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA6__GPIO_2_6 MXS_IOMUX_PAD_NAKED(2, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DATA7__GPIO_2_7 MXS_IOMUX_PAD_NAKED(2, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_CMD__GPIO_2_8 MXS_IOMUX_PAD_NAKED(2, 8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_DETECT__GPIO_2_9 MXS_IOMUX_PAD_NAKED(2, 9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP0_SCK__GPIO_2_10 MXS_IOMUX_PAD_NAKED(2, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_SCK__GPIO_2_12 MXS_IOMUX_PAD_NAKED(2, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_CMD__GPIO_2_13 MXS_IOMUX_PAD_NAKED(2, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_DATA0__GPIO_2_14 MXS_IOMUX_PAD_NAKED(2, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP1_DATA3__GPIO_2_15 MXS_IOMUX_PAD_NAKED(2, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SCK__GPIO_2_16 MXS_IOMUX_PAD_NAKED(2, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_MOSI__GPIO_2_17 MXS_IOMUX_PAD_NAKED(2, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_MISO__GPIO_2_18 MXS_IOMUX_PAD_NAKED(2, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS0__GPIO_2_19 MXS_IOMUX_PAD_NAKED(2, 19, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS1__GPIO_2_20 MXS_IOMUX_PAD_NAKED(2, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP2_SS2__GPIO_2_21 MXS_IOMUX_PAD_NAKED(2, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_SCK__GPIO_2_24 MXS_IOMUX_PAD_NAKED(2, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_MOSI__GPIO_2_25 MXS_IOMUX_PAD_NAKED(2, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_MISO__GPIO_2_26 MXS_IOMUX_PAD_NAKED(2, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SSP3_SS0__GPIO_2_27 MXS_IOMUX_PAD_NAKED(2, 27, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_AUART0_RX__GPIO_3_0 MXS_IOMUX_PAD_NAKED(3, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_TX__GPIO_3_1 MXS_IOMUX_PAD_NAKED(3, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_CTS__GPIO_3_2 MXS_IOMUX_PAD_NAKED(3, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART0_RTS__GPIO_3_3 MXS_IOMUX_PAD_NAKED(3, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_RX__GPIO_3_4 MXS_IOMUX_PAD_NAKED(3, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_TX__GPIO_3_5 MXS_IOMUX_PAD_NAKED(3, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_CTS__GPIO_3_6 MXS_IOMUX_PAD_NAKED(3, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART1_RTS__GPIO_3_7 MXS_IOMUX_PAD_NAKED(3, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_RX__GPIO_3_8 MXS_IOMUX_PAD_NAKED(3, 8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_TX__GPIO_3_9 MXS_IOMUX_PAD_NAKED(3, 9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_CTS__GPIO_3_10 MXS_IOMUX_PAD_NAKED(3, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART2_RTS__GPIO_3_11 MXS_IOMUX_PAD_NAKED(3, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_RX__GPIO_3_12 MXS_IOMUX_PAD_NAKED(3, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_TX__GPIO_3_13 MXS_IOMUX_PAD_NAKED(3, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_CTS__GPIO_3_14 MXS_IOMUX_PAD_NAKED(3, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_AUART3_RTS__GPIO_3_15 MXS_IOMUX_PAD_NAKED(3, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM0__GPIO_3_16 MXS_IOMUX_PAD_NAKED(3, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM1__GPIO_3_17 MXS_IOMUX_PAD_NAKED(3, 17, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM2__GPIO_3_18 MXS_IOMUX_PAD_NAKED(3, 18, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_MCLK__GPIO_3_20 MXS_IOMUX_PAD_NAKED(3, 20, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_LRCLK__GPIO_3_21 MXS_IOMUX_PAD_NAKED(3, 21, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_BITCLK__GPIO_3_22 MXS_IOMUX_PAD_NAKED(3, 22, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF0_SDATA0__GPIO_3_23 MXS_IOMUX_PAD_NAKED(3, 23, PAD_MUXSEL_GPIO)
+#define MX28_PAD_I2C0_SCL__GPIO_3_24 MXS_IOMUX_PAD_NAKED(3, 24, PAD_MUXSEL_GPIO)
+#define MX28_PAD_I2C0_SDA__GPIO_3_25 MXS_IOMUX_PAD_NAKED(3, 25, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SAIF1_SDATA0__GPIO_3_26 MXS_IOMUX_PAD_NAKED(3, 26, PAD_MUXSEL_GPIO)
+#define MX28_PAD_SPDIF__GPIO_3_27 MXS_IOMUX_PAD_NAKED(3, 27, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM3__GPIO_3_28 MXS_IOMUX_PAD_NAKED(3, 28, PAD_MUXSEL_GPIO)
+#define MX28_PAD_PWM4__GPIO_3_29 MXS_IOMUX_PAD_NAKED(3, 29, PAD_MUXSEL_GPIO)
+#define MX28_PAD_LCD_RESET__GPIO_3_30 MXS_IOMUX_PAD_NAKED(3, 30, PAD_MUXSEL_GPIO)
+
+#define MX28_PAD_ENET0_MDC__GPIO_4_0 MXS_IOMUX_PAD_NAKED(4, 0, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_MDIO__GPIO_4_1 MXS_IOMUX_PAD_NAKED(4, 1, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RX_EN__GPIO_4_2 MXS_IOMUX_PAD_NAKED(4, 2, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD0__GPIO_4_3 MXS_IOMUX_PAD_NAKED(4, 3, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD1__GPIO_4_4 MXS_IOMUX_PAD_NAKED(4, 4, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TX_CLK__GPIO_4_5 MXS_IOMUX_PAD_NAKED(4, 5, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TX_EN__GPIO_4_6 MXS_IOMUX_PAD_NAKED(4, 6, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD0__GPIO_4_7 MXS_IOMUX_PAD_NAKED(4, 7, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD1__GPIO_4_8 MXS_IOMUX_PAD_NAKED(4, 8, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD2__GPIO_4_9 MXS_IOMUX_PAD_NAKED(4, 9, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RXD3__GPIO_4_10 MXS_IOMUX_PAD_NAKED(4, 10, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD2__GPIO_4_11 MXS_IOMUX_PAD_NAKED(4, 11, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_TXD3__GPIO_4_12 MXS_IOMUX_PAD_NAKED(4, 12, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_RX_CLK__GPIO_4_13 MXS_IOMUX_PAD_NAKED(4, 13, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_COL__GPIO_4_14 MXS_IOMUX_PAD_NAKED(4, 14, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET0_CRS__GPIO_4_15 MXS_IOMUX_PAD_NAKED(4, 15, PAD_MUXSEL_GPIO)
+#define MX28_PAD_ENET_CLK__GPIO_4_16 MXS_IOMUX_PAD_NAKED(4, 16, PAD_MUXSEL_GPIO)
+#define MX28_PAD_JTAG_RTCK__GPIO_4_20 MXS_IOMUX_PAD_NAKED(4, 20, PAD_MUXSEL_GPIO)
+
+#endif /* __MACH_IOMUX_MX28_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/iomux.h b/arch/arm/include/asm/arch-mx28/iomux.h
new file mode 100644
index 0000000..7abdf58
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/iomux.h
@@ -0,0 +1,168 @@
+/*
+ * Copyright (C) 2009 by Jan Weitzel Phytec Messtechnik GmbH,
+ * <armlinux@phytec.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MACH_MXS_IOMUX_H__
+#define __MACH_MXS_IOMUX_H__
+
+/*
+ * IOMUX/PAD Bit field definitions
+ *
+ * PAD_BANK: 0..2 (3)
+ * PAD_PIN: 3..7 (5)
+ * PAD_MUXSEL: 8..9 (2)
+ * PAD_MA: 10..11 (2)
+ * PAD_MA_VALID: 12 (1)
+ * PAD_VOL: 13 (1)
+ * PAD_VOL_VALID: 14 (1)
+ * PAD_PULL: 15 (1)
+ * PAD_PULL_VALID: 16 (1)
+ * RESERVED: 17..31 (15)
+ */
+typedef u32 iomux_cfg_t;
+
+#define MXS_PAD_BANK_SHIFT 0
+#define MXS_PAD_BANK_MASK ((iomux_cfg_t)0x7 << MXS_PAD_BANK_SHIFT)
+#define MXS_PAD_PIN_SHIFT 3
+#define MXS_PAD_PIN_MASK ((iomux_cfg_t)0x1f << MXS_PAD_PIN_SHIFT)
+#define MXS_PAD_MUXSEL_SHIFT 8
+#define MXS_PAD_MUXSEL_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MUXSEL_SHIFT)
+#define MXS_PAD_MA_SHIFT 10
+#define MXS_PAD_MA_MASK ((iomux_cfg_t)0x3 << MXS_PAD_MA_SHIFT)
+#define MXS_PAD_MA_VALID_SHIFT 12
+#define MXS_PAD_MA_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_MA_VALID_SHIFT)
+#define MXS_PAD_VOL_SHIFT 13
+#define MXS_PAD_VOL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_SHIFT)
+#define MXS_PAD_VOL_VALID_SHIFT 14
+#define MXS_PAD_VOL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_VOL_VALID_SHIFT)
+#define MXS_PAD_PULL_SHIFT 15
+#define MXS_PAD_PULL_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_SHIFT)
+#define MXS_PAD_PULL_VALID_SHIFT 16
+#define MXS_PAD_PULL_VALID_MASK ((iomux_cfg_t)0x1 << MXS_PAD_PULL_VALID_SHIFT)
+
+#define PAD_MUXSEL_0 0
+#define PAD_MUXSEL_1 1
+#define PAD_MUXSEL_2 2
+#define PAD_MUXSEL_GPIO 3
+
+#define PAD_4MA 0
+#define PAD_8MA 1
+#define PAD_12MA 2
+#define PAD_16MA 3
+
+#define PAD_1V8 0
+#define PAD_3V3 1
+
+#define PAD_NOPULL 0
+#define PAD_PULLUP 1
+
+#define MXS_PAD_4MA ((PAD_4MA << MXS_PAD_MA_SHIFT) | \
+ MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_8MA ((PAD_8MA << MXS_PAD_MA_SHIFT) | \
+ MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_12MA ((PAD_12MA << MXS_PAD_MA_SHIFT) | \
+ MXS_PAD_MA_VALID_MASK)
+#define MXS_PAD_16MA ((PAD_16MA << MXS_PAD_MA_SHIFT) | \
+ MXS_PAD_MA_VALID_MASK)
+
+#define MXS_PAD_1V8 ((PAD_1V8 << MXS_PAD_VOL_SHIFT) | \
+ MXS_PAD_VOL_VALID_MASK)
+#define MXS_PAD_3V3 ((PAD_3V3 << MXS_PAD_VOL_SHIFT) | \
+ MXS_PAD_VOL_VALID_MASK)
+
+#define MXS_PAD_NOPULL ((PAD_NOPULL << MXS_PAD_PULL_SHIFT) | \
+ MXS_PAD_PULL_VALID_MASK)
+#define MXS_PAD_PULLUP ((PAD_PULLUP << MXS_PAD_PULL_SHIFT) | \
+ MXS_PAD_PULL_VALID_MASK)
+
+/* generic pad control used in most cases */
+#define MXS_PAD_CTRL (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL)
+
+#define MXS_IOMUX_PAD(_bank, _pin, _muxsel, _ma, _vol, _pull) \
+ (((iomux_cfg_t)(_bank) << MXS_PAD_BANK_SHIFT) | \
+ ((iomux_cfg_t)(_pin) << MXS_PAD_PIN_SHIFT) | \
+ ((iomux_cfg_t)(_muxsel) << MXS_PAD_MUXSEL_SHIFT) | \
+ ((iomux_cfg_t)(_ma) << MXS_PAD_MA_SHIFT) | \
+ ((iomux_cfg_t)(_vol) << MXS_PAD_VOL_SHIFT) | \
+ ((iomux_cfg_t)(_pull) << MXS_PAD_PULL_SHIFT))
+
+/*
+ * A pad becomes naked, when none of mA, vol or pull
+ * validity bits is set.
+ */
+#define MXS_IOMUX_PAD_NAKED(_bank, _pin, _muxsel) \
+ MXS_IOMUX_PAD(_bank, _pin, _muxsel, 0, 0, 0)
+
+static inline unsigned int PAD_BANK(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_BANK_MASK) >> MXS_PAD_BANK_SHIFT;
+}
+
+static inline unsigned int PAD_PIN(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_PIN_MASK) >> MXS_PAD_PIN_SHIFT;
+}
+
+static inline unsigned int PAD_MUXSEL(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_MUXSEL_MASK) >> MXS_PAD_MUXSEL_SHIFT;
+}
+
+static inline unsigned int PAD_MA(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_MA_MASK) >> MXS_PAD_MA_SHIFT;
+}
+
+static inline unsigned int PAD_MA_VALID(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_MA_VALID_MASK) >> MXS_PAD_MA_VALID_SHIFT;
+}
+
+static inline unsigned int PAD_VOL(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_VOL_MASK) >> MXS_PAD_VOL_SHIFT;
+}
+
+static inline unsigned int PAD_VOL_VALID(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_VOL_VALID_MASK) >> MXS_PAD_VOL_VALID_SHIFT;
+}
+
+static inline unsigned int PAD_PULL(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_PULL_MASK) >> MXS_PAD_PULL_SHIFT;
+}
+
+static inline unsigned int PAD_PULL_VALID(iomux_cfg_t pad)
+{
+ return (pad & MXS_PAD_PULL_VALID_MASK) >> MXS_PAD_PULL_VALID_SHIFT;
+}
+
+/*
+ * configures a single pad in the iomuxer
+ */
+int mxs_iomux_setup_pad(iomux_cfg_t pad);
+
+/*
+ * configures multiple pads
+ * convenient way to call the above function with tables
+ */
+int mxs_iomux_setup_multiple_pads(const iomux_cfg_t *pad_list, unsigned count);
+
+#endif /* __MACH_MXS_IOMUX_H__*/
diff --git a/arch/arm/include/asm/arch-mx28/regs-apbh.h b/arch/arm/include/asm/arch-mx28/regs-apbh.h
new file mode 100644
index 0000000..a7fa1ec
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-apbh.h
@@ -0,0 +1,466 @@
+/*
+ * Freescale i.MX28 APBH Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_APBH_H__
+#define __REGS_APBH_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_apbh_regs {
+ mx28_reg(hw_apbh_ctrl0)
+ mx28_reg(hw_apbh_ctrl1)
+ mx28_reg(hw_apbh_ctrl2)
+ mx28_reg(hw_apbh_channel_ctrl)
+ mx28_reg(hw_apbh_devsel)
+ mx28_reg(hw_apbh_dma_burst_size)
+ mx28_reg(hw_apbh_debug)
+
+ uint32_t reserved[36];
+
+ union {
+ struct {
+ mx28_reg(hw_apbh_ch_curcmdar)
+ mx28_reg(hw_apbh_ch_nxtcmdar)
+ mx28_reg(hw_apbh_ch_cmd)
+ mx28_reg(hw_apbh_ch_bar)
+ mx28_reg(hw_apbh_ch_sema)
+ mx28_reg(hw_apbh_ch_debug1)
+ mx28_reg(hw_apbh_ch_debug2)
+ } ch[16];
+ struct {
+ mx28_reg(hw_apbh_ch0_curcmdar)
+ mx28_reg(hw_apbh_ch0_nxtcmdar)
+ mx28_reg(hw_apbh_ch0_cmd)
+ mx28_reg(hw_apbh_ch0_bar)
+ mx28_reg(hw_apbh_ch0_sema)
+ mx28_reg(hw_apbh_ch0_debug1)
+ mx28_reg(hw_apbh_ch0_debug2)
+ mx28_reg(hw_apbh_ch1_curcmdar)
+ mx28_reg(hw_apbh_ch1_nxtcmdar)
+ mx28_reg(hw_apbh_ch1_cmd)
+ mx28_reg(hw_apbh_ch1_bar)
+ mx28_reg(hw_apbh_ch1_sema)
+ mx28_reg(hw_apbh_ch1_debug1)
+ mx28_reg(hw_apbh_ch1_debug2)
+ mx28_reg(hw_apbh_ch2_curcmdar)
+ mx28_reg(hw_apbh_ch2_nxtcmdar)
+ mx28_reg(hw_apbh_ch2_cmd)
+ mx28_reg(hw_apbh_ch2_bar)
+ mx28_reg(hw_apbh_ch2_sema)
+ mx28_reg(hw_apbh_ch2_debug1)
+ mx28_reg(hw_apbh_ch2_debug2)
+ mx28_reg(hw_apbh_ch3_curcmdar)
+ mx28_reg(hw_apbh_ch3_nxtcmdar)
+ mx28_reg(hw_apbh_ch3_cmd)
+ mx28_reg(hw_apbh_ch3_bar)
+ mx28_reg(hw_apbh_ch3_sema)
+ mx28_reg(hw_apbh_ch3_debug1)
+ mx28_reg(hw_apbh_ch3_debug2)
+ mx28_reg(hw_apbh_ch4_curcmdar)
+ mx28_reg(hw_apbh_ch4_nxtcmdar)
+ mx28_reg(hw_apbh_ch4_cmd)
+ mx28_reg(hw_apbh_ch4_bar)
+ mx28_reg(hw_apbh_ch4_sema)
+ mx28_reg(hw_apbh_ch4_debug1)
+ mx28_reg(hw_apbh_ch4_debug2)
+ mx28_reg(hw_apbh_ch5_curcmdar)
+ mx28_reg(hw_apbh_ch5_nxtcmdar)
+ mx28_reg(hw_apbh_ch5_cmd)
+ mx28_reg(hw_apbh_ch5_bar)
+ mx28_reg(hw_apbh_ch5_sema)
+ mx28_reg(hw_apbh_ch5_debug1)
+ mx28_reg(hw_apbh_ch5_debug2)
+ mx28_reg(hw_apbh_ch6_curcmdar)
+ mx28_reg(hw_apbh_ch6_nxtcmdar)
+ mx28_reg(hw_apbh_ch6_cmd)
+ mx28_reg(hw_apbh_ch6_bar)
+ mx28_reg(hw_apbh_ch6_sema)
+ mx28_reg(hw_apbh_ch6_debug1)
+ mx28_reg(hw_apbh_ch6_debug2)
+ mx28_reg(hw_apbh_ch7_curcmdar)
+ mx28_reg(hw_apbh_ch7_nxtcmdar)
+ mx28_reg(hw_apbh_ch7_cmd)
+ mx28_reg(hw_apbh_ch7_bar)
+ mx28_reg(hw_apbh_ch7_sema)
+ mx28_reg(hw_apbh_ch7_debug1)
+ mx28_reg(hw_apbh_ch7_debug2)
+ mx28_reg(hw_apbh_ch8_curcmdar)
+ mx28_reg(hw_apbh_ch8_nxtcmdar)
+ mx28_reg(hw_apbh_ch8_cmd)
+ mx28_reg(hw_apbh_ch8_bar)
+ mx28_reg(hw_apbh_ch8_sema)
+ mx28_reg(hw_apbh_ch8_debug1)
+ mx28_reg(hw_apbh_ch8_debug2)
+ mx28_reg(hw_apbh_ch9_curcmdar)
+ mx28_reg(hw_apbh_ch9_nxtcmdar)
+ mx28_reg(hw_apbh_ch9_cmd)
+ mx28_reg(hw_apbh_ch9_bar)
+ mx28_reg(hw_apbh_ch9_sema)
+ mx28_reg(hw_apbh_ch9_debug1)
+ mx28_reg(hw_apbh_ch9_debug2)
+ mx28_reg(hw_apbh_ch10_curcmdar)
+ mx28_reg(hw_apbh_ch10_nxtcmdar)
+ mx28_reg(hw_apbh_ch10_cmd)
+ mx28_reg(hw_apbh_ch10_bar)
+ mx28_reg(hw_apbh_ch10_sema)
+ mx28_reg(hw_apbh_ch10_debug1)
+ mx28_reg(hw_apbh_ch10_debug2)
+ mx28_reg(hw_apbh_ch11_curcmdar)
+ mx28_reg(hw_apbh_ch11_nxtcmdar)
+ mx28_reg(hw_apbh_ch11_cmd)
+ mx28_reg(hw_apbh_ch11_bar)
+ mx28_reg(hw_apbh_ch11_sema)
+ mx28_reg(hw_apbh_ch11_debug1)
+ mx28_reg(hw_apbh_ch11_debug2)
+ mx28_reg(hw_apbh_ch12_curcmdar)
+ mx28_reg(hw_apbh_ch12_nxtcmdar)
+ mx28_reg(hw_apbh_ch12_cmd)
+ mx28_reg(hw_apbh_ch12_bar)
+ mx28_reg(hw_apbh_ch12_sema)
+ mx28_reg(hw_apbh_ch12_debug1)
+ mx28_reg(hw_apbh_ch12_debug2)
+ mx28_reg(hw_apbh_ch13_curcmdar)
+ mx28_reg(hw_apbh_ch13_nxtcmdar)
+ mx28_reg(hw_apbh_ch13_cmd)
+ mx28_reg(hw_apbh_ch13_bar)
+ mx28_reg(hw_apbh_ch13_sema)
+ mx28_reg(hw_apbh_ch13_debug1)
+ mx28_reg(hw_apbh_ch13_debug2)
+ mx28_reg(hw_apbh_ch14_curcmdar)
+ mx28_reg(hw_apbh_ch14_nxtcmdar)
+ mx28_reg(hw_apbh_ch14_cmd)
+ mx28_reg(hw_apbh_ch14_bar)
+ mx28_reg(hw_apbh_ch14_sema)
+ mx28_reg(hw_apbh_ch14_debug1)
+ mx28_reg(hw_apbh_ch14_debug2)
+ mx28_reg(hw_apbh_ch15_curcmdar)
+ mx28_reg(hw_apbh_ch15_nxtcmdar)
+ mx28_reg(hw_apbh_ch15_cmd)
+ mx28_reg(hw_apbh_ch15_bar)
+ mx28_reg(hw_apbh_ch15_sema)
+ mx28_reg(hw_apbh_ch15_debug1)
+ mx28_reg(hw_apbh_ch15_debug2)
+ };
+ };
+ mx28_reg(hw_apbh_version)
+};
+#endif
+
+#define APBH_CTRL0_SFTRST (1 << 31)
+#define APBH_CTRL0_CLKGATE (1 << 30)
+#define APBH_CTRL0_AHB_BURST8_EN (1 << 29)
+#define APBH_CTRL0_APB_BURST_EN (1 << 28)
+#define APBH_CTRL0_RSVD0_MASK (0xfff << 16)
+#define APBH_CTRL0_RSVD0_OFFSET 16
+#define APBH_CTRL0_CLKGATE_CHANNEL_MASK 0xffff
+#define APBH_CTRL0_CLKGATE_CHANNEL_OFFSET 0
+#define APBH_CTRL0_CLKGATE_CHANNEL_SSP0 0x0001
+#define APBH_CTRL0_CLKGATE_CHANNEL_SSP1 0x0002
+#define APBH_CTRL0_CLKGATE_CHANNEL_SSP2 0x0004
+#define APBH_CTRL0_CLKGATE_CHANNEL_SSP3 0x0008
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND0 0x0010
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND1 0x0020
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND2 0x0040
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND3 0x0080
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND4 0x0100
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND5 0x0200
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND6 0x0400
+#define APBH_CTRL0_CLKGATE_CHANNEL_NAND7 0x0800
+#define APBH_CTRL0_CLKGATE_CHANNEL_HSADC 0x1000
+#define APBH_CTRL0_CLKGATE_CHANNEL_LCDIF 0x2000
+
+#define APBH_CTRL1_CH15_CMDCMPLT_IRQ_EN (1 << 31)
+#define APBH_CTRL1_CH14_CMDCMPLT_IRQ_EN (1 << 30)
+#define APBH_CTRL1_CH13_CMDCMPLT_IRQ_EN (1 << 29)
+#define APBH_CTRL1_CH12_CMDCMPLT_IRQ_EN (1 << 28)
+#define APBH_CTRL1_CH11_CMDCMPLT_IRQ_EN (1 << 27)
+#define APBH_CTRL1_CH10_CMDCMPLT_IRQ_EN (1 << 26)
+#define APBH_CTRL1_CH9_CMDCMPLT_IRQ_EN (1 << 25)
+#define APBH_CTRL1_CH8_CMDCMPLT_IRQ_EN (1 << 24)
+#define APBH_CTRL1_CH7_CMDCMPLT_IRQ_EN (1 << 23)
+#define APBH_CTRL1_CH6_CMDCMPLT_IRQ_EN (1 << 22)
+#define APBH_CTRL1_CH5_CMDCMPLT_IRQ_EN (1 << 21)
+#define APBH_CTRL1_CH4_CMDCMPLT_IRQ_EN (1 << 20)
+#define APBH_CTRL1_CH3_CMDCMPLT_IRQ_EN (1 << 19)
+#define APBH_CTRL1_CH2_CMDCMPLT_IRQ_EN (1 << 18)
+#define APBH_CTRL1_CH1_CMDCMPLT_IRQ_EN (1 << 17)
+#define APBH_CTRL1_CH0_CMDCMPLT_IRQ_EN (1 << 16)
+#define APBH_CTRL1_CH_CMDCMPLT_IRQ_EN_OFFSET 16
+#define APBH_CTRL1_CH_CMDCMPLT_IRQ_EN_MASK (0xffff << 16)
+#define APBH_CTRL1_CH15_CMDCMPLT_IRQ (1 << 15)
+#define APBH_CTRL1_CH14_CMDCMPLT_IRQ (1 << 14)
+#define APBH_CTRL1_CH13_CMDCMPLT_IRQ (1 << 13)
+#define APBH_CTRL1_CH12_CMDCMPLT_IRQ (1 << 12)
+#define APBH_CTRL1_CH11_CMDCMPLT_IRQ (1 << 11)
+#define APBH_CTRL1_CH10_CMDCMPLT_IRQ (1 << 10)
+#define APBH_CTRL1_CH9_CMDCMPLT_IRQ (1 << 9)
+#define APBH_CTRL1_CH8_CMDCMPLT_IRQ (1 << 8)
+#define APBH_CTRL1_CH7_CMDCMPLT_IRQ (1 << 7)
+#define APBH_CTRL1_CH6_CMDCMPLT_IRQ (1 << 6)
+#define APBH_CTRL1_CH5_CMDCMPLT_IRQ (1 << 5)
+#define APBH_CTRL1_CH4_CMDCMPLT_IRQ (1 << 4)
+#define APBH_CTRL1_CH3_CMDCMPLT_IRQ (1 << 3)
+#define APBH_CTRL1_CH2_CMDCMPLT_IRQ (1 << 2)
+#define APBH_CTRL1_CH1_CMDCMPLT_IRQ (1 << 1)
+#define APBH_CTRL1_CH0_CMDCMPLT_IRQ (1 << 0)
+
+#define APBH_CTRL2_CH15_ERROR_STATUS (1 << 31)
+#define APBH_CTRL2_CH14_ERROR_STATUS (1 << 30)
+#define APBH_CTRL2_CH13_ERROR_STATUS (1 << 29)
+#define APBH_CTRL2_CH12_ERROR_STATUS (1 << 28)
+#define APBH_CTRL2_CH11_ERROR_STATUS (1 << 27)
+#define APBH_CTRL2_CH10_ERROR_STATUS (1 << 26)
+#define APBH_CTRL2_CH9_ERROR_STATUS (1 << 25)
+#define APBH_CTRL2_CH8_ERROR_STATUS (1 << 24)
+#define APBH_CTRL2_CH7_ERROR_STATUS (1 << 23)
+#define APBH_CTRL2_CH6_ERROR_STATUS (1 << 22)
+#define APBH_CTRL2_CH5_ERROR_STATUS (1 << 21)
+#define APBH_CTRL2_CH4_ERROR_STATUS (1 << 20)
+#define APBH_CTRL2_CH3_ERROR_STATUS (1 << 19)
+#define APBH_CTRL2_CH2_ERROR_STATUS (1 << 18)
+#define APBH_CTRL2_CH1_ERROR_STATUS (1 << 17)
+#define APBH_CTRL2_CH0_ERROR_STATUS (1 << 16)
+#define APBH_CTRL2_CH15_ERROR_IRQ (1 << 15)
+#define APBH_CTRL2_CH14_ERROR_IRQ (1 << 14)
+#define APBH_CTRL2_CH13_ERROR_IRQ (1 << 13)
+#define APBH_CTRL2_CH12_ERROR_IRQ (1 << 12)
+#define APBH_CTRL2_CH11_ERROR_IRQ (1 << 11)
+#define APBH_CTRL2_CH10_ERROR_IRQ (1 << 10)
+#define APBH_CTRL2_CH9_ERROR_IRQ (1 << 9)
+#define APBH_CTRL2_CH8_ERROR_IRQ (1 << 8)
+#define APBH_CTRL2_CH7_ERROR_IRQ (1 << 7)
+#define APBH_CTRL2_CH6_ERROR_IRQ (1 << 6)
+#define APBH_CTRL2_CH5_ERROR_IRQ (1 << 5)
+#define APBH_CTRL2_CH4_ERROR_IRQ (1 << 4)
+#define APBH_CTRL2_CH3_ERROR_IRQ (1 << 3)
+#define APBH_CTRL2_CH2_ERROR_IRQ (1 << 2)
+#define APBH_CTRL2_CH1_ERROR_IRQ (1 << 1)
+#define APBH_CTRL2_CH0_ERROR_IRQ (1 << 0)
+
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_MASK (0xffff << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET 16
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP0 (0x0001 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP1 (0x0002 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP2 (0x0004 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_SSP3 (0x0008 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND0 (0x0010 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND1 (0x0020 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND2 (0x0040 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND3 (0x0080 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND4 (0x0100 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND5 (0x0200 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND6 (0x0400 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_NAND7 (0x0800 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_HSADC (0x1000 << 16)
+#define APBH_CHANNEL_CTRL_RESET_CHANNEL_LCDIF (0x2000 << 16)
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_MASK 0xffff
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_OFFSET 0
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP0 0x0001
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP1 0x0002
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP2 0x0004
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_SSP3 0x0008
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND0 0x0010
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND1 0x0020
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND2 0x0040
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND3 0x0080
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND4 0x0100
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND5 0x0200
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND6 0x0400
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_NAND7 0x0800
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_HSADC 0x1000
+#define APBH_CHANNEL_CTRL_FREEZE_CHANNEL_LCDIF 0x2000
+
+#define APBH_DEVSEL_CH15_MASK (0x3 << 30)
+#define APBH_DEVSEL_CH15_OFFSET 30
+#define APBH_DEVSEL_CH14_MASK (0x3 << 28)
+#define APBH_DEVSEL_CH14_OFFSET 28
+#define APBH_DEVSEL_CH13_MASK (0x3 << 26)
+#define APBH_DEVSEL_CH13_OFFSET 26
+#define APBH_DEVSEL_CH12_MASK (0x3 << 24)
+#define APBH_DEVSEL_CH12_OFFSET 24
+#define APBH_DEVSEL_CH11_MASK (0x3 << 22)
+#define APBH_DEVSEL_CH11_OFFSET 22
+#define APBH_DEVSEL_CH10_MASK (0x3 << 20)
+#define APBH_DEVSEL_CH10_OFFSET 20
+#define APBH_DEVSEL_CH9_MASK (0x3 << 18)
+#define APBH_DEVSEL_CH9_OFFSET 18
+#define APBH_DEVSEL_CH8_MASK (0x3 << 16)
+#define APBH_DEVSEL_CH8_OFFSET 16
+#define APBH_DEVSEL_CH7_MASK (0x3 << 14)
+#define APBH_DEVSEL_CH7_OFFSET 14
+#define APBH_DEVSEL_CH6_MASK (0x3 << 12)
+#define APBH_DEVSEL_CH6_OFFSET 12
+#define APBH_DEVSEL_CH5_MASK (0x3 << 10)
+#define APBH_DEVSEL_CH5_OFFSET 10
+#define APBH_DEVSEL_CH4_MASK (0x3 << 8)
+#define APBH_DEVSEL_CH4_OFFSET 8
+#define APBH_DEVSEL_CH3_MASK (0x3 << 6)
+#define APBH_DEVSEL_CH3_OFFSET 6
+#define APBH_DEVSEL_CH2_MASK (0x3 << 4)
+#define APBH_DEVSEL_CH2_OFFSET 4
+#define APBH_DEVSEL_CH1_MASK (0x3 << 2)
+#define APBH_DEVSEL_CH1_OFFSET 2
+#define APBH_DEVSEL_CH0_MASK (0x3 << 0)
+#define APBH_DEVSEL_CH0_OFFSET 0
+
+#define APBH_DMA_BURST_SIZE_CH15_MASK (0x3 << 30)
+#define APBH_DMA_BURST_SIZE_CH15_OFFSET 30
+#define APBH_DMA_BURST_SIZE_CH14_MASK (0x3 << 28)
+#define APBH_DMA_BURST_SIZE_CH14_OFFSET 28
+#define APBH_DMA_BURST_SIZE_CH13_MASK (0x3 << 26)
+#define APBH_DMA_BURST_SIZE_CH13_OFFSET 26
+#define APBH_DMA_BURST_SIZE_CH12_MASK (0x3 << 24)
+#define APBH_DMA_BURST_SIZE_CH12_OFFSET 24
+#define APBH_DMA_BURST_SIZE_CH11_MASK (0x3 << 22)
+#define APBH_DMA_BURST_SIZE_CH11_OFFSET 22
+#define APBH_DMA_BURST_SIZE_CH10_MASK (0x3 << 20)
+#define APBH_DMA_BURST_SIZE_CH10_OFFSET 20
+#define APBH_DMA_BURST_SIZE_CH9_MASK (0x3 << 18)
+#define APBH_DMA_BURST_SIZE_CH9_OFFSET 18
+#define APBH_DMA_BURST_SIZE_CH8_MASK (0x3 << 16)
+#define APBH_DMA_BURST_SIZE_CH8_OFFSET 16
+#define APBH_DMA_BURST_SIZE_CH8_BURST0 (0x0 << 16)
+#define APBH_DMA_BURST_SIZE_CH8_BURST4 (0x1 << 16)
+#define APBH_DMA_BURST_SIZE_CH8_BURST8 (0x2 << 16)
+#define APBH_DMA_BURST_SIZE_CH7_MASK (0x3 << 14)
+#define APBH_DMA_BURST_SIZE_CH7_OFFSET 14
+#define APBH_DMA_BURST_SIZE_CH6_MASK (0x3 << 12)
+#define APBH_DMA_BURST_SIZE_CH6_OFFSET 12
+#define APBH_DMA_BURST_SIZE_CH5_MASK (0x3 << 10)
+#define APBH_DMA_BURST_SIZE_CH5_OFFSET 10
+#define APBH_DMA_BURST_SIZE_CH4_MASK (0x3 << 8)
+#define APBH_DMA_BURST_SIZE_CH4_OFFSET 8
+#define APBH_DMA_BURST_SIZE_CH3_MASK (0x3 << 6)
+#define APBH_DMA_BURST_SIZE_CH3_OFFSET 6
+#define APBH_DMA_BURST_SIZE_CH3_BURST0 (0x0 << 6)
+#define APBH_DMA_BURST_SIZE_CH3_BURST4 (0x1 << 6)
+#define APBH_DMA_BURST_SIZE_CH3_BURST8 (0x2 << 6)
+
+#define APBH_DMA_BURST_SIZE_CH2_MASK (0x3 << 4)
+#define APBH_DMA_BURST_SIZE_CH2_OFFSET 4
+#define APBH_DMA_BURST_SIZE_CH2_BURST0 (0x0 << 4)
+#define APBH_DMA_BURST_SIZE_CH2_BURST4 (0x1 << 4)
+#define APBH_DMA_BURST_SIZE_CH2_BURST8 (0x2 << 4)
+#define APBH_DMA_BURST_SIZE_CH1_MASK (0x3 << 2)
+#define APBH_DMA_BURST_SIZE_CH1_OFFSET 2
+#define APBH_DMA_BURST_SIZE_CH1_BURST0 (0x0 << 2)
+#define APBH_DMA_BURST_SIZE_CH1_BURST4 (0x1 << 2)
+#define APBH_DMA_BURST_SIZE_CH1_BURST8 (0x2 << 2)
+
+#define APBH_DMA_BURST_SIZE_CH0_MASK 0x3
+#define APBH_DMA_BURST_SIZE_CH0_OFFSET 0
+#define APBH_DMA_BURST_SIZE_CH0_BURST0 0x0
+#define APBH_DMA_BURST_SIZE_CH0_BURST4 0x1
+#define APBH_DMA_BURST_SIZE_CH0_BURST8 0x2
+
+#define APBH_DEBUG_GPMI_ONE_FIFO (1 << 0)
+
+#define APBH_CHn_CURCMDAR_CMD_ADDR_MASK 0xffffffff
+#define APBH_CHn_CURCMDAR_CMD_ADDR_OFFSET 0
+
+#define APBH_CHn_NXTCMDAR_CMD_ADDR_MASK 0xffffffff
+#define APBH_CHn_NXTCMDAR_CMD_ADDR_OFFSET 0
+
+#define APBH_CHn_CMD_XFER_COUNT_MASK (0xffff << 16)
+#define APBH_CHn_CMD_XFER_COUNT_OFFSET 16
+#define APBH_CHn_CMD_CMDWORDS_MASK (0xf << 12)
+#define APBH_CHn_CMD_CMDWORDS_OFFSET 12
+#define APBH_CHn_CMD_HALTONTERMINATE (1 << 8)
+#define APBH_CHn_CMD_WAIT4ENDCMD (1 << 7)
+#define APBH_CHn_CMD_SEMAPHORE (1 << 6)
+#define APBH_CHn_CMD_NANDWAIT4READY (1 << 5)
+#define APBH_CHn_CMD_NANDLOCK (1 << 4)
+#define APBH_CHn_CMD_IRQONCMPLT (1 << 3)
+#define APBH_CHn_CMD_CHAIN (1 << 2)
+#define APBH_CHn_CMD_COMMAND_MASK 0x3
+#define APBH_CHn_CMD_COMMAND_OFFSET 0
+#define APBH_CHn_CMD_COMMAND_NO_DMA_XFER 0x0
+#define APBH_CHn_CMD_COMMAND_DMA_WRITE 0x1
+#define APBH_CHn_CMD_COMMAND_DMA_READ 0x2
+#define APBH_CHn_CMD_COMMAND_DMA_SENSE 0x3
+
+#define APBH_CHn_BAR_ADDRESS_MASK 0xffffffff
+#define APBH_CHn_BAR_ADDRESS_OFFSET 0
+
+#define APBH_CHn_SEMA_RSVD2_MASK (0xff << 24)
+#define APBH_CHn_SEMA_RSVD2_OFFSET 24
+#define APBH_CHn_SEMA_PHORE_MASK (0xff << 16)
+#define APBH_CHn_SEMA_PHORE_OFFSET 16
+#define APBH_CHn_SEMA_RSVD1_MASK (0xff << 8)
+#define APBH_CHn_SEMA_RSVD1_OFFSET 8
+#define APBH_CHn_SEMA_INCREMENT_SEMA_MASK (0xff << 0)
+#define APBH_CHn_SEMA_INCREMENT_SEMA_OFFSET 0
+
+#define APBH_CHn_DEBUG1_REQ (1 << 31)
+#define APBH_CHn_DEBUG1_BURST (1 << 30)
+#define APBH_CHn_DEBUG1_KICK (1 << 29)
+#define APBH_CHn_DEBUG1_END (1 << 28)
+#define APBH_CHn_DEBUG1_SENSE (1 << 27)
+#define APBH_CHn_DEBUG1_READY (1 << 26)
+#define APBH_CHn_DEBUG1_LOCK (1 << 25)
+#define APBH_CHn_DEBUG1_NEXTCMDADDRVALID (1 << 24)
+#define APBH_CHn_DEBUG1_RD_FIFO_EMPTY (1 << 23)
+#define APBH_CHn_DEBUG1_RD_FIFO_FULL (1 << 22)
+#define APBH_CHn_DEBUG1_WR_FIFO_EMPTY (1 << 21)
+#define APBH_CHn_DEBUG1_WR_FIFO_FULL (1 << 20)
+#define APBH_CHn_DEBUG1_RSVD1_MASK (0x7fff << 5)
+#define APBH_CHn_DEBUG1_RSVD1_OFFSET 5
+#define APBH_CHn_DEBUG1_STATEMACHINE_MASK 0x1f
+#define APBH_CHn_DEBUG1_STATEMACHINE_OFFSET 0
+#define APBH_CHn_DEBUG1_STATEMACHINE_IDLE 0x00
+#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD1 0x01
+#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD3 0x02
+#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD2 0x03
+#define APBH_CHn_DEBUG1_STATEMACHINE_XFER_DECODE 0x04
+#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_WAIT 0x05
+#define APBH_CHn_DEBUG1_STATEMACHINE_REQ_CMD4 0x06
+#define APBH_CHn_DEBUG1_STATEMACHINE_PIO_REQ 0x07
+#define APBH_CHn_DEBUG1_STATEMACHINE_READ_FLUSH 0x08
+#define APBH_CHn_DEBUG1_STATEMACHINE_READ_WAIT 0x09
+#define APBH_CHn_DEBUG1_STATEMACHINE_WRITE 0x0c
+#define APBH_CHn_DEBUG1_STATEMACHINE_READ_REQ 0x0d
+#define APBH_CHn_DEBUG1_STATEMACHINE_CHECK_CHAIN 0x0e
+#define APBH_CHn_DEBUG1_STATEMACHINE_XFER_COMPLETE 0x0f
+#define APBH_CHn_DEBUG1_STATEMACHINE_TERMINATE 0x14
+#define APBH_CHn_DEBUG1_STATEMACHINE_WAIT_END 0x15
+#define APBH_CHn_DEBUG1_STATEMACHINE_WRITE_WAIT 0x1c
+#define APBH_CHn_DEBUG1_STATEMACHINE_HALT_AFTER_TERM 0x1d
+#define APBH_CHn_DEBUG1_STATEMACHINE_CHECK_WAIT 0x1e
+#define APBH_CHn_DEBUG1_STATEMACHINE_WAIT_READY 0x1f
+
+#define APBH_CHn_DEBUG2_APB_BYTES_MASK (0xffff << 16)
+#define APBH_CHn_DEBUG2_APB_BYTES_OFFSET 16
+#define APBH_CHn_DEBUG2_AHB_BYTES_MASK 0xffff
+#define APBH_CHn_DEBUG2_AHB_BYTES_OFFSET 0
+
+#define APBH_VERSION_MAJOR_MASK (0xff << 24)
+#define APBH_VERSION_MAJOR_OFFSET 24
+#define APBH_VERSION_MINOR_MASK (0xff << 16)
+#define APBH_VERSION_MINOR_OFFSET 16
+#define APBH_VERSION_STEP_MASK 0xffff
+#define APBH_VERSION_STEP_OFFSET 0
+
+#endif /* __REGS_APBH_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-base.h b/arch/arm/include/asm/arch-mx28/regs-base.h
new file mode 100644
index 0000000..dbdcc2b
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-base.h
@@ -0,0 +1,88 @@
+/*
+ * Freescale i.MX28 Peripheral Base Addresses
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2008 Embedded Alley Solutions Inc.
+ *
+ * (C) Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_BASE_H__
+#define __MX28_REGS_BASE_H__
+
+/*
+ * Register base address
+ */
+#define MXS_ICOL_BASE 0x80000000
+#define MXS_HSADC_BASE 0x80002000
+#define MXS_APBH_BASE 0x80004000
+#define MXS_PERFMON_BASE 0x80006000
+#define MXS_BCH_BASE 0x8000A000
+#define MXS_GPMI_BASE 0x8000C000
+#define MXS_SSP0_BASE 0x80010000
+#define MXS_SSP1_BASE 0x80012000
+#define MXS_SSP2_BASE 0x80014000
+#define MXS_SSP3_BASE 0x80016000
+#define MXS_PINCTRL_BASE 0x80018000
+#define MXS_DIGCTL_BASE 0x8001C000
+#define MXS_ETM_BASE 0x80022000
+#define MXS_APBX_BASE 0x80024000
+#define MXS_DCP_BASE 0x80028000
+#define MXS_PXP_BASE 0x8002A000
+#define MXS_OCOTP_BASE 0x8002C000
+#define MXS_AXI_AHB0_BASE 0x8002E000
+#define MXS_LCDIF_BASE 0x80030000
+#define MXS_CAN0_BASE 0x80032000
+#define MXS_CAN1_BASE 0x80034000
+#define MXS_SIMDBG_BASE 0x8003C000
+#define MXS_SIMGPMISEL_BASE 0x8003C200
+#define MXS_SIMSSPSEL_BASE 0x8003C300
+#define MXS_SIMMEMSEL_BASE 0x8003C400
+#define MXS_GPIOMON_BASE 0x8003C500
+#define MXS_SIMENET_BASE 0x8003C700
+#define MXS_ARMJTAG_BASE 0x8003C800
+#define MXS_CLKCTRL_BASE 0x80040000
+#define MXS_SAIF0_BASE 0x80042000
+#define MXS_POWER_BASE 0x80044000
+#define MXS_SAIF1_BASE 0x80046000
+#define MXS_LRADC_BASE 0x80050000
+#define MXS_SPDIF_BASE 0x80054000
+#define MXS_RTC_BASE 0x80056000
+#define MXS_I2C0_BASE 0x80058000
+#define MXS_I2C1_BASE 0x8005A000
+#define MXS_PWM_BASE 0x80064000
+#define MXS_TIMROT_BASE 0x80068000
+#define MXS_UARTAPP0_BASE 0x8006A000
+#define MXS_UARTAPP1_BASE 0x8006C000
+#define MXS_UARTAPP2_BASE 0x8006E000
+#define MXS_UARTAPP3_BASE 0x80070000
+#define MXS_UARTAPP4_BASE 0x80072000
+#define MXS_UARTDBG_BASE 0x80074000
+#define MXS_USBPHY0_BASE 0x8007C000
+#define MXS_USBPHY1_BASE 0x8007E000
+#define MXS_USBCTRL0_BASE 0x80080000
+#define MXS_USBCTRL1_BASE 0x80090000
+#define MXS_DFLPT_BASE 0x800C0000
+#define MXS_DRAM_BASE 0x800E0000
+#define MXS_ENET0_BASE 0x800F0000
+#define MXS_ENET1_BASE 0x800F4000
+
+#endif /* __MX28_REGS_BASE_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-bch.h b/arch/arm/include/asm/arch-mx28/regs-bch.h
new file mode 100644
index 0000000..cac0470
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-bch.h
@@ -0,0 +1,230 @@
+/*
+ * Freescale i.MX28 BCH Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_BCH_H__
+#define __MX28_REGS_BCH_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_bch_regs {
+ mx28_reg(hw_bch_ctrl)
+ mx28_reg(hw_bch_status0)
+ mx28_reg(hw_bch_mode)
+ mx28_reg(hw_bch_encodeptr)
+ mx28_reg(hw_bch_dataptr)
+ mx28_reg(hw_bch_metaptr)
+
+ uint32_t reserved[4];
+
+ mx28_reg(hw_bch_layoutselect)
+ mx28_reg(hw_bch_flash0layout0)
+ mx28_reg(hw_bch_flash0layout1)
+ mx28_reg(hw_bch_flash1layout0)
+ mx28_reg(hw_bch_flash1layout1)
+ mx28_reg(hw_bch_flash2layout0)
+ mx28_reg(hw_bch_flash2layout1)
+ mx28_reg(hw_bch_flash3layout0)
+ mx28_reg(hw_bch_flash3layout1)
+ mx28_reg(hw_bch_dbgkesread)
+ mx28_reg(hw_bch_dbgcsferead)
+ mx28_reg(hw_bch_dbgsyndegread)
+ mx28_reg(hw_bch_dbgahbmread)
+ mx28_reg(hw_bch_blockname)
+ mx28_reg(hw_bch_version)
+};
+#endif
+
+#define BCH_CTRL_SFTRST (1 << 31)
+#define BCH_CTRL_CLKGATE (1 << 30)
+#define BCH_CTRL_DEBUGSYNDROME (1 << 22)
+#define BCH_CTRL_M2M_LAYOUT_MASK (0x3 << 18)
+#define BCH_CTRL_M2M_LAYOUT_OFFSET 18
+#define BCH_CTRL_M2M_ENCODE (1 << 17)
+#define BCH_CTRL_M2M_ENABLE (1 << 16)
+#define BCH_CTRL_DEBUG_STALL_IRQ_EN (1 << 10)
+#define BCH_CTRL_COMPLETE_IRQ_EN (1 << 8)
+#define BCH_CTRL_BM_ERROR_IRQ (1 << 3)
+#define BCH_CTRL_DEBUG_STALL_IRQ (1 << 2)
+#define BCH_CTRL_COMPLETE_IRQ (1 << 0)
+
+#define BCH_STATUS0_HANDLE_MASK (0xfff << 20)
+#define BCH_STATUS0_HANDLE_OFFSET 20
+#define BCH_STATUS0_COMPLETED_CE_MASK (0xf << 16)
+#define BCH_STATUS0_COMPLETED_CE_OFFSET 16
+#define BCH_STATUS0_STATUS_BLK0_MASK (0xff << 8)
+#define BCH_STATUS0_STATUS_BLK0_OFFSET 8
+#define BCH_STATUS0_STATUS_BLK0_ZERO (0x00 << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERROR1 (0x01 << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERROR2 (0x02 << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERROR3 (0x03 << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERROR4 (0x04 << 8)
+#define BCH_STATUS0_STATUS_BLK0_UNCORRECTABLE (0xfe << 8)
+#define BCH_STATUS0_STATUS_BLK0_ERASED (0xff << 8)
+#define BCH_STATUS0_ALLONES (1 << 4)
+#define BCH_STATUS0_CORRECTED (1 << 3)
+#define BCH_STATUS0_UNCORRECTABLE (1 << 2)
+
+#define BCH_MODE_ERASE_THRESHOLD_MASK 0xff
+#define BCH_MODE_ERASE_THRESHOLD_OFFSET 0
+
+#define BCH_ENCODEPTR_ADDR_MASK 0xffffffff
+#define BCH_ENCODEPTR_ADDR_OFFSET 0
+
+#define BCH_DATAPTR_ADDR_MASK 0xffffffff
+#define BCH_DATAPTR_ADDR_OFFSET 0
+
+#define BCH_METAPTR_ADDR_MASK 0xffffffff
+#define BCH_METAPTR_ADDR_OFFSET 0
+
+#define BCH_LAYOUTSELECT_CS15_SELECT_MASK (0x3 << 30)
+#define BCH_LAYOUTSELECT_CS15_SELECT_OFFSET 30
+#define BCH_LAYOUTSELECT_CS14_SELECT_MASK (0x3 << 28)
+#define BCH_LAYOUTSELECT_CS14_SELECT_OFFSET 28
+#define BCH_LAYOUTSELECT_CS13_SELECT_MASK (0x3 << 26)
+#define BCH_LAYOUTSELECT_CS13_SELECT_OFFSET 26
+#define BCH_LAYOUTSELECT_CS12_SELECT_MASK (0x3 << 24)
+#define BCH_LAYOUTSELECT_CS12_SELECT_OFFSET 24
+#define BCH_LAYOUTSELECT_CS11_SELECT_MASK (0x3 << 22)
+#define BCH_LAYOUTSELECT_CS11_SELECT_OFFSET 22
+#define BCH_LAYOUTSELECT_CS10_SELECT_MASK (0x3 << 20)
+#define BCH_LAYOUTSELECT_CS10_SELECT_OFFSET 20
+#define BCH_LAYOUTSELECT_CS9_SELECT_MASK (0x3 << 18)
+#define BCH_LAYOUTSELECT_CS9_SELECT_OFFSET 18
+#define BCH_LAYOUTSELECT_CS8_SELECT_MASK (0x3 << 16)
+#define BCH_LAYOUTSELECT_CS8_SELECT_OFFSET 16
+#define BCH_LAYOUTSELECT_CS7_SELECT_MASK (0x3 << 14)
+#define BCH_LAYOUTSELECT_CS7_SELECT_OFFSET 14
+#define BCH_LAYOUTSELECT_CS6_SELECT_MASK (0x3 << 12)
+#define BCH_LAYOUTSELECT_CS6_SELECT_OFFSET 12
+#define BCH_LAYOUTSELECT_CS5_SELECT_MASK (0x3 << 10)
+#define BCH_LAYOUTSELECT_CS5_SELECT_OFFSET 10
+#define BCH_LAYOUTSELECT_CS4_SELECT_MASK (0x3 << 8)
+#define BCH_LAYOUTSELECT_CS4_SELECT_OFFSET 8
+#define BCH_LAYOUTSELECT_CS3_SELECT_MASK (0x3 << 6)
+#define BCH_LAYOUTSELECT_CS3_SELECT_OFFSET 6
+#define BCH_LAYOUTSELECT_CS2_SELECT_MASK (0x3 << 4)
+#define BCH_LAYOUTSELECT_CS2_SELECT_OFFSET 4
+#define BCH_LAYOUTSELECT_CS1_SELECT_MASK (0x3 << 2)
+#define BCH_LAYOUTSELECT_CS1_SELECT_OFFSET 2
+#define BCH_LAYOUTSELECT_CS0_SELECT_MASK (0x3 << 0)
+#define BCH_LAYOUTSELECT_CS0_SELECT_OFFSET 0
+
+#define BCH_FLASHLAYOUT0_NBLOCKS_MASK (0xff << 24)
+#define BCH_FLASHLAYOUT0_NBLOCKS_OFFSET 24
+#define BCH_FLASHLAYOUT0_META_SIZE_MASK (0xff << 16)
+#define BCH_FLASHLAYOUT0_META_SIZE_OFFSET 16
+#define BCH_FLASHLAYOUT0_ECC0_MASK (0xf << 12)
+#define BCH_FLASHLAYOUT0_ECC0_OFFSET 12
+#define BCH_FLASHLAYOUT0_ECC0_NONE (0x0 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC2 (0x1 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC4 (0x2 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC6 (0x3 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC8 (0x4 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC10 (0x5 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC12 (0x6 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC14 (0x7 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC16 (0x8 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC18 (0x9 << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC20 (0xa << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC22 (0xb << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC24 (0xc << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC26 (0xd << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC28 (0xe << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC30 (0xf << 12)
+#define BCH_FLASHLAYOUT0_ECC0_ECC32 (0x10 << 12)
+#define BCH_FLASHLAYOUT0_GF13_0_GF14_1 (1 << 10)
+#define BCH_FLASHLAYOUT0_DATA0_SIZE_MASK 0xfff
+#define BCH_FLASHLAYOUT0_DATA0_SIZE_OFFSET 0
+
+#define BCH_FLASHLAYOUT1_PAGE_SIZE_MASK (0xffff << 16)
+#define BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET 16
+#define BCH_FLASHLAYOUT1_ECCN_MASK (0xf << 12)
+#define BCH_FLASHLAYOUT1_ECCN_OFFSET 12
+#define BCH_FLASHLAYOUT1_ECCN_NONE (0x0 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC2 (0x1 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC4 (0x2 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC6 (0x3 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC8 (0x4 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC10 (0x5 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC12 (0x6 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC14 (0x7 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC16 (0x8 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC18 (0x9 << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC20 (0xa << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC22 (0xb << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC24 (0xc << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC26 (0xd << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC28 (0xe << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC30 (0xf << 12)
+#define BCH_FLASHLAYOUT1_ECCN_ECC32 (0x10 << 12)
+#define BCH_FLASHLAYOUT1_GF13_0_GF14_1 (1 << 10)
+#define BCH_FLASHLAYOUT1_DATAN_SIZE_MASK 0xfff
+#define BCH_FLASHLAYOUT1_DATAN_SIZE_OFFSET 0
+
+#define BCH_DEBUG0_RSVD1_MASK (0x1f << 27)
+#define BCH_DEBUG0_RSVD1_OFFSET 27
+#define BCH_DEBUG0_ROM_BIST_ENABLE (1 << 26)
+#define BCH_DEBUG0_ROM_BIST_COMPLETE (1 << 25)
+#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_MASK (0x1ff << 16)
+#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_OFFSET 16
+#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_NORMAL (0x0 << 16)
+#define BCH_DEBUG0_KES_DEBUG_SYNDROME_SYMBOL_TEST_MODE (0x1 << 16)
+#define BCH_DEBUG0_KES_DEBUG_SHIFT_SYND (1 << 15)
+#define BCH_DEBUG0_KES_DEBUG_PAYLOAD_FLAG (1 << 14)
+#define BCH_DEBUG0_KES_DEBUG_MODE4K (1 << 13)
+#define BCH_DEBUG0_KES_DEBUG_KICK (1 << 12)
+#define BCH_DEBUG0_KES_STANDALONE (1 << 11)
+#define BCH_DEBUG0_KES_DEBUG_STEP (1 << 10)
+#define BCH_DEBUG0_KES_DEBUG_STALL (1 << 9)
+#define BCH_DEBUG0_BM_KES_TEST_BYPASS (1 << 8)
+#define BCH_DEBUG0_RSVD0_MASK (0x3 << 6)
+#define BCH_DEBUG0_RSVD0_OFFSET 6
+#define BCH_DEBUG0_DEBUG_REG_SELECT_MASK 0x3f
+#define BCH_DEBUG0_DEBUG_REG_SELECT_OFFSET 0
+
+#define BCH_DBGKESREAD_VALUES_MASK 0xffffffff
+#define BCH_DBGKESREAD_VALUES_OFFSET 0
+
+#define BCH_DBGCSFEREAD_VALUES_MASK 0xffffffff
+#define BCH_DBGCSFEREAD_VALUES_OFFSET 0
+
+#define BCH_DBGSYNDGENREAD_VALUES_MASK 0xffffffff
+#define BCH_DBGSYNDGENREAD_VALUES_OFFSET 0
+
+#define BCH_DBGAHBMREAD_VALUES_MASK 0xffffffff
+#define BCH_DBGAHBMREAD_VALUES_OFFSET 0
+
+#define BCH_BLOCKNAME_NAME_MASK 0xffffffff
+#define BCH_BLOCKNAME_NAME_OFFSET 0
+
+#define BCH_VERSION_MAJOR_MASK (0xff << 24)
+#define BCH_VERSION_MAJOR_OFFSET 24
+#define BCH_VERSION_MINOR_MASK (0xff << 16)
+#define BCH_VERSION_MINOR_OFFSET 16
+#define BCH_VERSION_STEP_MASK 0xffff
+#define BCH_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_BCH_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-clkctrl.h b/arch/arm/include/asm/arch-mx28/regs-clkctrl.h
new file mode 100644
index 0000000..93d0397
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-clkctrl.h
@@ -0,0 +1,312 @@
+/*
+ * Freescale i.MX28 CLKCTRL Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_CLKCTRL_H__
+#define __MX28_REGS_CLKCTRL_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_clkctrl_regs {
+ mx28_reg(hw_clkctrl_pll0ctrl0) /* 0x00 */
+ mx28_reg(hw_clkctrl_pll0ctrl1) /* 0x10 */
+ mx28_reg(hw_clkctrl_pll1ctrl0) /* 0x20 */
+ mx28_reg(hw_clkctrl_pll1ctrl1) /* 0x30 */
+ mx28_reg(hw_clkctrl_pll2ctrl0) /* 0x40 */
+ mx28_reg(hw_clkctrl_cpu) /* 0x50 */
+ mx28_reg(hw_clkctrl_hbus) /* 0x60 */
+ mx28_reg(hw_clkctrl_xbus) /* 0x70 */
+ mx28_reg(hw_clkctrl_xtal) /* 0x80 */
+ mx28_reg(hw_clkctrl_ssp0) /* 0x90 */
+ mx28_reg(hw_clkctrl_ssp1) /* 0xa0 */
+ mx28_reg(hw_clkctrl_ssp2) /* 0xb0 */
+ mx28_reg(hw_clkctrl_ssp3) /* 0xc0 */
+ mx28_reg(hw_clkctrl_gpmi) /* 0xd0 */
+ mx28_reg(hw_clkctrl_spdif) /* 0xe0 */
+ mx28_reg(hw_clkctrl_emi) /* 0xf0 */
+ mx28_reg(hw_clkctrl_saif0) /* 0x100 */
+ mx28_reg(hw_clkctrl_saif1) /* 0x110 */
+ mx28_reg(hw_clkctrl_lcdif) /* 0x120 */
+ mx28_reg(hw_clkctrl_etm) /* 0x130 */
+ mx28_reg(hw_clkctrl_enet) /* 0x140 */
+ mx28_reg(hw_clkctrl_hsadc) /* 0x150 */
+ mx28_reg(hw_clkctrl_flexcan) /* 0x160 */
+
+ uint32_t reserved[16];
+
+ mx28_reg(hw_clkctrl_frac0) /* 0x1b0 */
+ mx28_reg(hw_clkctrl_frac1) /* 0x1c0 */
+ mx28_reg(hw_clkctrl_clkseq) /* 0x1d0 */
+ mx28_reg(hw_clkctrl_reset) /* 0x1e0 */
+ mx28_reg(hw_clkctrl_status) /* 0x1f0 */
+ mx28_reg(hw_clkctrl_version) /* 0x200 */
+};
+#endif
+
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_MASK (0x3 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_OFFSET 28
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_DEFAULT (0x0 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_2 (0x1 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_TIMES_05 (0x2 << 28)
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_UNDEFINED (0x3 << 28)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_MASK (0x3 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_OFFSET 24
+#define CLKCTRL_PLL0CTRL0_CP_SEL_DEFAULT (0x0 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_2 (0x1 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_TIMES_05 (0x2 << 24)
+#define CLKCTRL_PLL0CTRL0_CP_SEL_UNDEFINED (0x3 << 24)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_MASK (0x3 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_OFFSET 20
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_DEFAULT (0x0 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWER (0x1 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_LOWEST (0x2 << 20)
+#define CLKCTRL_PLL0CTRL0_DIV_SEL_UNDEFINED (0x3 << 20)
+#define CLKCTRL_PLL0CTRL0_EN_USB_CLKS (1 << 18)
+#define CLKCTRL_PLL0CTRL0_POWER (1 << 17)
+
+#define CLKCTRL_PLL0CTRL1_LOCK (1 << 31)
+#define CLKCTRL_PLL0CTRL1_FORCE_LOCK (1 << 30)
+#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_MASK 0xffff
+#define CLKCTRL_PLL0CTRL1_LOCK_COUNT_OFFSET 0
+
+#define CLKCTRL_PLL1CTRL0_CLKGATEEMI (1 << 31)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_MASK (0x3 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_OFFSET 28
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_DEFAULT (0x0 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_TIMES_2 (0x1 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_TIMES_05 (0x2 << 28)
+#define CLKCTRL_PLL1CTRL0_LFR_SEL_UNDEFINED (0x3 << 28)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_MASK (0x3 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_OFFSET 24
+#define CLKCTRL_PLL1CTRL0_CP_SEL_DEFAULT (0x0 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_TIMES_2 (0x1 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_TIMES_05 (0x2 << 24)
+#define CLKCTRL_PLL1CTRL0_CP_SEL_UNDEFINED (0x3 << 24)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_MASK (0x3 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_OFFSET 20
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_DEFAULT (0x0 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_LOWER (0x1 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_LOWEST (0x2 << 20)
+#define CLKCTRL_PLL1CTRL0_DIV_SEL_UNDEFINED (0x3 << 20)
+#define CLKCTRL_PLL1CTRL0_EN_USB_CLKS (1 << 18)
+#define CLKCTRL_PLL1CTRL0_POWER (1 << 17)
+
+#define CLKCTRL_PLL1CTRL1_LOCK (1 << 31)
+#define CLKCTRL_PLL1CTRL1_FORCE_LOCK (1 << 30)
+#define CLKCTRL_PLL1CTRL1_LOCK_COUNT_MASK 0xffff
+#define CLKCTRL_PLL1CTRL1_LOCK_COUNT_OFFSET 0
+
+#define CLKCTRL_PLL2CTRL0_CLKGATE (1 << 31)
+#define CLKCTRL_PLL2CTRL0_LFR_SEL_MASK (0x3 << 28)
+#define CLKCTRL_PLL2CTRL0_LFR_SEL_OFFSET 28
+#define CLKCTRL_PLL2CTRL0_HOLD_RING_OFF_B (1 << 26)
+#define CLKCTRL_PLL2CTRL0_CP_SEL_MASK (0x3 << 24)
+#define CLKCTRL_PLL2CTRL0_CP_SEL_OFFSET 24
+#define CLKCTRL_PLL2CTRL0_POWER (1 << 23)
+
+#define CLKCTRL_CPU_BUSY_REF_XTAL (1 << 29)
+#define CLKCTRL_CPU_BUSY_REF_CPU (1 << 28)
+#define CLKCTRL_CPU_DIV_XTAL_FRAC_EN (1 << 26)
+#define CLKCTRL_CPU_DIV_XTAL_MASK (0x3ff << 16)
+#define CLKCTRL_CPU_DIV_XTAL_OFFSET 16
+#define CLKCTRL_CPU_INTERRUPT_WAIT (1 << 12)
+#define CLKCTRL_CPU_DIV_CPU_FRAC_EN (1 << 10)
+#define CLKCTRL_CPU_DIV_CPU_MASK 0x3f
+#define CLKCTRL_CPU_DIV_CPU_OFFSET 0
+
+#define CLKCTRL_HBUS_ASM_BUSY (1 << 31)
+#define CLKCTRL_HBUS_DCP_AS_ENABLE (1 << 30)
+#define CLKCTRL_HBUS_PXP_AS_ENABLE (1 << 29)
+#define CLKCTRL_HBUS_ASM_EMIPORT_AS_ENABLE (1 << 27)
+#define CLKCTRL_HBUS_APBHDMA_AS_ENABLE (1 << 26)
+#define CLKCTRL_HBUS_APBXDMA_AS_ENABLE (1 << 25)
+#define CLKCTRL_HBUS_TRAFFIC_JAM_AS_ENABLE (1 << 24)
+#define CLKCTRL_HBUS_TRAFFIC_AS_ENABLE (1 << 23)
+#define CLKCTRL_HBUS_CPU_DATA_AS_ENABLE (1 << 22)
+#define CLKCTRL_HBUS_CPU_INSTR_AS_ENABLE (1 << 21)
+#define CLKCTRL_HBUS_ASM_ENABLE (1 << 20)
+#define CLKCTRL_HBUS_AUTO_CLEAR_DIV_ENABLE (1 << 19)
+#define CLKCTRL_HBUS_SLOW_DIV_MASK (0x7 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_OFFSET 16
+#define CLKCTRL_HBUS_SLOW_DIV_BY1 (0x0 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY2 (0x1 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY4 (0x2 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY8 (0x3 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY16 (0x4 << 16)
+#define CLKCTRL_HBUS_SLOW_DIV_BY32 (0x5 << 16)
+#define CLKCTRL_HBUS_DIV_FRAC_EN (1 << 5)
+#define CLKCTRL_HBUS_DIV_MASK 0x1f
+#define CLKCTRL_HBUS_DIV_OFFSET 0
+
+#define CLKCTRL_XBUS_BUSY (1 << 31)
+#define CLKCTRL_XBUS_AUTO_CLEAR_DIV_ENABLE (1 << 11)
+#define CLKCTRL_XBUS_DIV_FRAC_EN (1 << 10)
+#define CLKCTRL_XBUS_DIV_MASK 0x3ff
+#define CLKCTRL_XBUS_DIV_OFFSET 0
+
+#define CLKCTRL_XTAL_UART_CLK_GATE (1 << 31)
+#define CLKCTRL_XTAL_PWM_CLK24M_GATE (1 << 29)
+#define CLKCTRL_XTAL_TIMROT_CLK32K_GATE (1 << 26)
+#define CLKCTRL_XTAL_DIV_UART_MASK 0x3
+#define CLKCTRL_XTAL_DIV_UART_OFFSET 0
+
+#define CLKCTRL_SSP_CLKGATE (1 << 31)
+#define CLKCTRL_SSP_BUSY (1 << 29)
+#define CLKCTRL_SSP_DIV_FRAC_EN (1 << 9)
+#define CLKCTRL_SSP_DIV_MASK 0x1ff
+#define CLKCTRL_SSP_DIV_OFFSET 0
+
+#define CLKCTRL_GPMI_CLKGATE (1 << 31)
+#define CLKCTRL_GPMI_BUSY (1 << 29)
+#define CLKCTRL_GPMI_DIV_FRAC_EN (1 << 10)
+#define CLKCTRL_GPMI_DIV_MASK 0x3ff
+#define CLKCTRL_GPMI_DIV_OFFSET 0
+
+#define CLKCTRL_SPDIF_CLKGATE (1 << 31)
+
+#define CLKCTRL_EMI_CLKGATE (1 << 31)
+#define CLKCTRL_EMI_SYNC_MODE_EN (1 << 30)
+#define CLKCTRL_EMI_BUSY_REF_XTAL (1 << 29)
+#define CLKCTRL_EMI_BUSY_REF_EMI (1 << 28)
+#define CLKCTRL_EMI_BUSY_REF_CPU (1 << 27)
+#define CLKCTRL_EMI_BUSY_SYNC_MODE (1 << 26)
+#define CLKCTRL_EMI_BUSY_DCC_RESYNC (1 << 17)
+#define CLKCTRL_EMI_DCC_RESYNC_ENABLE (1 << 16)
+#define CLKCTRL_EMI_DIV_XTAL_MASK (0xf << 8)
+#define CLKCTRL_EMI_DIV_XTAL_OFFSET 8
+#define CLKCTRL_EMI_DIV_EMI_MASK 0x3f
+#define CLKCTRL_EMI_DIV_EMI_OFFSET 0
+
+#define CLKCTRL_SAIF0_CLKGATE (1 << 31)
+#define CLKCTRL_SAIF0_BUSY (1 << 29)
+#define CLKCTRL_SAIF0_DIV_FRAC_EN (1 << 16)
+#define CLKCTRL_SAIF0_DIV_MASK 0xffff
+#define CLKCTRL_SAIF0_DIV_OFFSET 0
+
+#define CLKCTRL_SAIF1_CLKGATE (1 << 31)
+#define CLKCTRL_SAIF1_BUSY (1 << 29)
+#define CLKCTRL_SAIF1_DIV_FRAC_EN (1 << 16)
+#define CLKCTRL_SAIF1_DIV_MASK 0xffff
+#define CLKCTRL_SAIF1_DIV_OFFSET 0
+
+#define CLKCTRL_DIS_LCDIF_CLKGATE (1 << 31)
+#define CLKCTRL_DIS_LCDIF_BUSY (1 << 29)
+#define CLKCTRL_DIS_LCDIF_DIV_FRAC_EN (1 << 13)
+#define CLKCTRL_DIS_LCDIF_DIV_MASK 0x1fff
+#define CLKCTRL_DIS_LCDIF_DIV_OFFSET 0
+
+#define CLKCTRL_ETM_CLKGATE (1 << 31)
+#define CLKCTRL_ETM_BUSY (1 << 29)
+#define CLKCTRL_ETM_DIV_FRAC_EN (1 << 7)
+#define CLKCTRL_ETM_DIV_MASK 0x7f
+#define CLKCTRL_ETM_DIV_OFFSET 0
+
+#define CLKCTRL_ENET_SLEEP (1 << 31)
+#define CLKCTRL_ENET_DISABLE (1 << 30)
+#define CLKCTRL_ENET_STATUS (1 << 29)
+#define CLKCTRL_ENET_BUSY_TIME (1 << 27)
+#define CLKCTRL_ENET_DIV_TIME_MASK (0x3f << 21)
+#define CLKCTRL_ENET_DIV_TIME_OFFSET 21
+#define CLKCTRL_ENET_TIME_SEL_MASK (0x3 << 19)
+#define CLKCTRL_ENET_TIME_SEL_OFFSET 19
+#define CLKCTRL_ENET_TIME_SEL_XTAL (0x0 << 19)
+#define CLKCTRL_ENET_TIME_SEL_PLL (0x1 << 19)
+#define CLKCTRL_ENET_TIME_SEL_RMII_CLK (0x2 << 19)
+#define CLKCTRL_ENET_TIME_SEL_UNDEFINED (0x3 << 19)
+#define CLKCTRL_ENET_CLK_OUT_EN (1 << 18)
+#define CLKCTRL_ENET_RESET_BY_SW_CHIP (1 << 17)
+#define CLKCTRL_ENET_RESET_BY_SW (1 << 16)
+
+#define CLKCTRL_HSADC_RESETB (1 << 30)
+#define CLKCTRL_HSADC_FREQDIV_MASK (0x3 << 28)
+#define CLKCTRL_HSADC_FREQDIV_OFFSET 28
+
+#define CLKCTRL_FLEXCAN_STOP_CAN0 (1 << 30)
+#define CLKCTRL_FLEXCAN_CAN0_STATUS (1 << 29)
+#define CLKCTRL_FLEXCAN_STOP_CAN1 (1 << 28)
+#define CLKCTRL_FLEXCAN_CAN1_STATUS (1 << 27)
+
+#define CLKCTRL_FRAC0_CLKGATEIO0 (1 << 31)
+#define CLKCTRL_FRAC0_IO0_STABLE (1 << 30)
+#define CLKCTRL_FRAC0_IO0FRAC_MASK (0x3f << 24)
+#define CLKCTRL_FRAC0_IO0FRAC_OFFSET 24
+#define CLKCTRL_FRAC0_CLKGATEIO1 (1 << 23)
+#define CLKCTRL_FRAC0_IO1_STABLE (1 << 22)
+#define CLKCTRL_FRAC0_IO1FRAC_MASK (0x3f << 16)
+#define CLKCTRL_FRAC0_IO1FRAC_OFFSET 16
+#define CLKCTRL_FRAC0_CLKGATEEMI (1 << 15)
+#define CLKCTRL_FRAC0_EMI_STABLE (1 << 14)
+#define CLKCTRL_FRAC0_EMIFRAC_MASK (0x3f << 8)
+#define CLKCTRL_FRAC0_EMIFRAC_OFFSET 8
+#define CLKCTRL_FRAC0_CLKGATECPU (1 << 7)
+#define CLKCTRL_FRAC0_CPU_STABLE (1 << 6)
+#define CLKCTRL_FRAC0_CPUFRAC_MASK 0x3f
+#define CLKCTRL_FRAC0_CPUFRAC_OFFSET 0
+
+#define CLKCTRL_FRAC1_CLKGATEGPMI (1 << 23)
+#define CLKCTRL_FRAC1_GPMI_STABLE (1 << 22)
+#define CLKCTRL_FRAC1_GPMIFRAC_MASK (0x3f << 16)
+#define CLKCTRL_FRAC1_GPMIFRAC_OFFSET 16
+#define CLKCTRL_FRAC1_CLKGATEHSADC (1 << 15)
+#define CLKCTRL_FRAC1_HSADC_STABLE (1 << 14)
+#define CLKCTRL_FRAC1_HSADCFRAC_MASK (0x3f << 8)
+#define CLKCTRL_FRAC1_HSADCFRAC_OFFSET 8
+#define CLKCTRL_FRAC1_CLKGATEPIX (1 << 7)
+#define CLKCTRL_FRAC1_PIX_STABLE (1 << 6)
+#define CLKCTRL_FRAC1_PIXFRAC_MASK 0x3f
+#define CLKCTRL_FRAC1_PIXFRAC_OFFSET 0
+
+#define CLKCTRL_CLKSEQ_BYPASS_CPU (1 << 18)
+#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF (1 << 14)
+#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF_BYPASS (0x1 << 14)
+#define CLKCTRL_CLKSEQ_BYPASS_DIS_LCDIF_PFD (0x0 << 14)
+#define CLKCTRL_CLKSEQ_BYPASS_ETM (1 << 8)
+#define CLKCTRL_CLKSEQ_BYPASS_EMI (1 << 7)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP3 (1 << 6)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP2 (1 << 5)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP1 (1 << 4)
+#define CLKCTRL_CLKSEQ_BYPASS_SSP0 (1 << 3)
+#define CLKCTRL_CLKSEQ_BYPASS_GPMI (1 << 2)
+#define CLKCTRL_CLKSEQ_BYPASS_SAIF1 (1 << 1)
+#define CLKCTRL_CLKSEQ_BYPASS_SAIF0 (1 << 0)
+
+#define CLKCTRL_RESET_WDOG_POR_DISABLE (1 << 5)
+#define CLKCTRL_RESET_EXTERNAL_RESET_ENABLE (1 << 4)
+#define CLKCTRL_RESET_THERMAL_RESET_ENABLE (1 << 3)
+#define CLKCTRL_RESET_THERMAL_RESET_DEFAULT (1 << 2)
+#define CLKCTRL_RESET_CHIP (1 << 1)
+#define CLKCTRL_RESET_DIG (1 << 0)
+
+#define CLKCTRL_STATUS_CPU_LIMIT_MASK (0x3 << 30)
+#define CLKCTRL_STATUS_CPU_LIMIT_OFFSET 30
+
+#define CLKCTRL_VERSION_MAJOR_MASK (0xff << 24)
+#define CLKCTRL_VERSION_MAJOR_OFFSET 24
+#define CLKCTRL_VERSION_MINOR_MASK (0xff << 16)
+#define CLKCTRL_VERSION_MINOR_OFFSET 16
+#define CLKCTRL_VERSION_STEP_MASK 0xffff
+#define CLKCTRL_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_CLKCTRL_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-common.h b/arch/arm/include/asm/arch-mx28/regs-common.h
new file mode 100644
index 0000000..efe975b
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-common.h
@@ -0,0 +1,66 @@
+/*
+ * Freescale i.MX28 Register Accessors
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_COMMON_H__
+#define __MX28_REGS_COMMON_H__
+
+/*
+ * The i.MX28 has interesting feature when it comes to register access. There
+ * are four kinds of access to one particular register. Those are:
+ *
+ * 1) Common read/write access. To use this mode, just write to the address of
+ * the register.
+ * 2) Set bits only access. To set bits, write which bits you want to set to the
+ * address of the register + 0x4.
+ * 3) Clear bits only access. To clear bits, write which bits you want to clear
+ * to the address of the register + 0x8.
+ * 4) Toggle bits only access. To toggle bits, write which bits you want to
+ * toggle to the address of the register + 0xc.
+ *
+ * IMPORTANT NOTE: Not all registers support accesses 2-4! Also, not all bits
+ * can be set/cleared by pure write as in access type 1, some need to be
+ * explicitly set/cleared by using access type 2-3.
+ *
+ * The following macros and structures allow the user to either access the
+ * register in all aforementioned modes (by accessing reg_name, reg_name_set,
+ * reg_name_clr, reg_name_tog) or pass the register structure further into
+ * various functions with correct type information (by accessing reg_name_reg).
+ *
+ */
+
+#define __mx28_reg(name) \
+ uint32_t name; \
+ uint32_t name##_set; \
+ uint32_t name##_clr; \
+ uint32_t name##_tog;
+
+struct mx28_register {
+ __mx28_reg(reg)
+};
+
+#define mx28_reg(name) \
+ union { \
+ struct { __mx28_reg(name) }; \
+ struct mx28_register name##_reg; \
+ };
+
+#endif /* __MX28_REGS_COMMON_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-gpmi.h b/arch/arm/include/asm/arch-mx28/regs-gpmi.h
new file mode 100644
index 0000000..0096793
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-gpmi.h
@@ -0,0 +1,222 @@
+/*
+ * Freescale i.MX28 GPMI Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_GPMI_H__
+#define __MX28_REGS_GPMI_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_gpmi_regs {
+ mx28_reg(hw_gpmi_ctrl0)
+ mx28_reg(hw_gpmi_compare)
+ mx28_reg(hw_gpmi_eccctrl)
+ mx28_reg(hw_gpmi_ecccount)
+ mx28_reg(hw_gpmi_payload)
+ mx28_reg(hw_gpmi_auxiliary)
+ mx28_reg(hw_gpmi_ctrl1)
+ mx28_reg(hw_gpmi_timing0)
+ mx28_reg(hw_gpmi_timing1)
+
+ uint32_t reserved[4];
+
+ mx28_reg(hw_gpmi_data)
+ mx28_reg(hw_gpmi_stat)
+ mx28_reg(hw_gpmi_debug)
+ mx28_reg(hw_gpmi_version)
+};
+#endif
+
+#define GPMI_CTRL0_SFTRST (1 << 31)
+#define GPMI_CTRL0_CLKGATE (1 << 30)
+#define GPMI_CTRL0_RUN (1 << 29)
+#define GPMI_CTRL0_DEV_IRQ_EN (1 << 28)
+#define GPMI_CTRL0_LOCK_CS (1 << 27)
+#define GPMI_CTRL0_UDMA (1 << 26)
+#define GPMI_CTRL0_COMMAND_MODE_MASK (0x3 << 24)
+#define GPMI_CTRL0_COMMAND_MODE_OFFSET 24
+#define GPMI_CTRL0_COMMAND_MODE_WRITE (0x0 << 24)
+#define GPMI_CTRL0_COMMAND_MODE_READ (0x1 << 24)
+#define GPMI_CTRL0_COMMAND_MODE_READ_AND_COMPARE (0x2 << 24)
+#define GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY (0x3 << 24)
+#define GPMI_CTRL0_WORD_LENGTH (1 << 23)
+#define GPMI_CTRL0_CS_MASK (0x7 << 20)
+#define GPMI_CTRL0_CS_OFFSET 20
+#define GPMI_CTRL0_ADDRESS_MASK (0x7 << 17)
+#define GPMI_CTRL0_ADDRESS_OFFSET 17
+#define GPMI_CTRL0_ADDRESS_NAND_DATA (0x0 << 17)
+#define GPMI_CTRL0_ADDRESS_NAND_CLE (0x1 << 17)
+#define GPMI_CTRL0_ADDRESS_NAND_ALE (0x2 << 17)
+#define GPMI_CTRL0_ADDRESS_INCREMENT (1 << 16)
+#define GPMI_CTRL0_XFER_COUNT_MASK 0xffff
+#define GPMI_CTRL0_XFER_COUNT_OFFSET 0
+
+#define GPMI_COMPARE_MASK_MASK (0xffff << 16)
+#define GPMI_COMPARE_MASK_OFFSET 16
+#define GPMI_COMPARE_REFERENCE_MASK 0xffff
+#define GPMI_COMPARE_REFERENCE_OFFSET 0
+
+#define GPMI_ECCCTRL_HANDLE_MASK (0xffff << 16)
+#define GPMI_ECCCTRL_HANDLE_OFFSET 16
+#define GPMI_ECCCTRL_ECC_CMD_MASK (0x3 << 13)
+#define GPMI_ECCCTRL_ECC_CMD_OFFSET 13
+#define GPMI_ECCCTRL_ECC_CMD_DECODE (0x0 << 13)
+#define GPMI_ECCCTRL_ECC_CMD_ENCODE (0x1 << 13)
+#define GPMI_ECCCTRL_ENABLE_ECC (1 << 12)
+#define GPMI_ECCCTRL_BUFFER_MASK_MASK 0x1ff
+#define GPMI_ECCCTRL_BUFFER_MASK_OFFSET 0
+#define GPMI_ECCCTRL_BUFFER_MASK_BCH_AUXONLY 0x100
+#define GPMI_ECCCTRL_BUFFER_MASK_BCH_PAGE 0x1ff
+
+#define GPMI_ECCCOUNT_COUNT_MASK 0xffff
+#define GPMI_ECCCOUNT_COUNT_OFFSET 0
+
+#define GPMI_PAYLOAD_ADDRESS_MASK (0x3fffffff << 2)
+#define GPMI_PAYLOAD_ADDRESS_OFFSET 2
+
+#define GPMI_AUXILIARY_ADDRESS_MASK (0x3fffffff << 2)
+#define GPMI_AUXILIARY_ADDRESS_OFFSET 2
+
+#define GPMI_CTRL1_DECOUPLE_CS (1 << 24)
+#define GPMI_CTRL1_WRN_DLY_SEL_MASK (0x3 << 22)
+#define GPMI_CTRL1_WRN_DLY_SEL_OFFSET 22
+#define GPMI_CTRL1_TIMEOUT_IRQ_EN (1 << 20)
+#define GPMI_CTRL1_GANGED_RDYBUSY (1 << 19)
+#define GPMI_CTRL1_BCH_MODE (1 << 18)
+#define GPMI_CTRL1_DLL_ENABLE (1 << 17)
+#define GPMI_CTRL1_HALF_PERIOD (1 << 16)
+#define GPMI_CTRL1_RDN_DELAY_MASK (0xf << 12)
+#define GPMI_CTRL1_RDN_DELAY_OFFSET 12
+#define GPMI_CTRL1_DMA2ECC_MODE (1 << 11)
+#define GPMI_CTRL1_DEV_IRQ (1 << 10)
+#define GPMI_CTRL1_TIMEOUT_IRQ (1 << 9)
+#define GPMI_CTRL1_BURST_EN (1 << 8)
+#define GPMI_CTRL1_ABORT_WAIT_REQUEST (1 << 7)
+#define GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL_MASK (0x7 << 4)
+#define GPMI_CTRL1_ABORT_WAIT_FOR_READY_CHANNEL_OFFSET 4
+#define GPMI_CTRL1_DEV_RESET (1 << 3)
+#define GPMI_CTRL1_ATA_IRQRDY_POLARITY (1 << 2)
+#define GPMI_CTRL1_CAMERA_MODE (1 << 1)
+#define GPMI_CTRL1_GPMI_MODE (1 << 0)
+
+#define GPMI_TIMING0_ADDRESS_SETUP_MASK (0xff << 16)
+#define GPMI_TIMING0_ADDRESS_SETUP_OFFSET 16
+#define GPMI_TIMING0_DATA_HOLD_MASK (0xff << 8)
+#define GPMI_TIMING0_DATA_HOLD_OFFSET 8
+#define GPMI_TIMING0_DATA_SETUP_MASK 0xff
+#define GPMI_TIMING0_DATA_SETUP_OFFSET 0
+
+#define GPMI_TIMING1_DEVICE_BUSY_TIMEOUT_MASK (0xffff << 16)
+#define GPMI_TIMING1_DEVICE_BUSY_TIMEOUT_OFFSET 16
+
+#define GPMI_TIMING2_UDMA_TRP_MASK (0xff << 24)
+#define GPMI_TIMING2_UDMA_TRP_OFFSET 24
+#define GPMI_TIMING2_UDMA_ENV_MASK (0xff << 16)
+#define GPMI_TIMING2_UDMA_ENV_OFFSET 16
+#define GPMI_TIMING2_UDMA_HOLD_MASK (0xff << 8)
+#define GPMI_TIMING2_UDMA_HOLD_OFFSET 8
+#define GPMI_TIMING2_UDMA_SETUP_MASK 0xff
+#define GPMI_TIMING2_UDMA_SETUP_OFFSET 0
+
+#define GPMI_DATA_DATA_MASK 0xffffffff
+#define GPMI_DATA_DATA_OFFSET 0
+
+#define GPMI_STAT_READY_BUSY_MASK (0xff << 24)
+#define GPMI_STAT_READY_BUSY_OFFSET 24
+#define GPMI_STAT_RDY_TIMEOUT_MASK (0xff << 16)
+#define GPMI_STAT_RDY_TIMEOUT_OFFSET 16
+#define GPMI_STAT_DEV7_ERROR (1 << 15)
+#define GPMI_STAT_DEV6_ERROR (1 << 14)
+#define GPMI_STAT_DEV5_ERROR (1 << 13)
+#define GPMI_STAT_DEV4_ERROR (1 << 12)
+#define GPMI_STAT_DEV3_ERROR (1 << 11)
+#define GPMI_STAT_DEV2_ERROR (1 << 10)
+#define GPMI_STAT_DEV1_ERROR (1 << 9)
+#define GPMI_STAT_DEV0_ERROR (1 << 8)
+#define GPMI_STAT_ATA_IRQ (1 << 4)
+#define GPMI_STAT_INVALID_BUFFER_MASK (1 << 3)
+#define GPMI_STAT_FIFO_EMPTY (1 << 2)
+#define GPMI_STAT_FIFO_FULL (1 << 1)
+#define GPMI_STAT_PRESENT (1 << 0)
+
+#define GPMI_DEBUG_WAIT_FOR_READY_END_MASK (0xff << 24)
+#define GPMI_DEBUG_WAIT_FOR_READY_END_OFFSET 24
+#define GPMI_DEBUG_DMA_SENSE_MASK (0xff << 16)
+#define GPMI_DEBUG_DMA_SENSE_OFFSET 16
+#define GPMI_DEBUG_DMAREQ_MASK (0xff << 8)
+#define GPMI_DEBUG_DMAREQ_OFFSET 8
+#define GPMI_DEBUG_CMD_END_MASK 0xff
+#define GPMI_DEBUG_CMD_END_OFFSET 0
+
+#define GPMI_VERSION_MAJOR_MASK (0xff << 24)
+#define GPMI_VERSION_MAJOR_OFFSET 24
+#define GPMI_VERSION_MINOR_MASK (0xff << 16)
+#define GPMI_VERSION_MINOR_OFFSET 16
+#define GPMI_VERSION_STEP_MASK 0xffff
+#define GPMI_VERSION_STEP_OFFSET 0
+
+#define GPMI_DEBUG2_UDMA_STATE_MASK (0xf << 24)
+#define GPMI_DEBUG2_UDMA_STATE_OFFSET 24
+#define GPMI_DEBUG2_BUSY (1 << 23)
+#define GPMI_DEBUG2_PIN_STATE_MASK (0x7 << 20)
+#define GPMI_DEBUG2_PIN_STATE_OFFSET 20
+#define GPMI_DEBUG2_PIN_STATE_PSM_IDLE (0x0 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_BYTCNT (0x1 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_ADDR (0x2 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_STALL (0x3 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_STROBE (0x4 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_ATARDY (0x5 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_DHOLD (0x6 << 20)
+#define GPMI_DEBUG2_PIN_STATE_PSM_DONE (0x7 << 20)
+#define GPMI_DEBUG2_MAIN_STATE_MASK (0xf << 16)
+#define GPMI_DEBUG2_MAIN_STATE_OFFSET 16
+#define GPMI_DEBUG2_MAIN_STATE_MSM_IDLE (0x0 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_BYTCNT (0x1 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFE (0x2 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFR (0x3 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_DMAREQ (0x4 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_DMAACK (0x5 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_WAITFF (0x6 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_LDFIFO (0x7 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_LDDMAR (0x8 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_RDCMP (0x9 << 16)
+#define GPMI_DEBUG2_MAIN_STATE_MSM_DONE (0xa << 16)
+#define GPMI_DEBUG2_SYND2GPMI_BE_MASK (0xf << 12)
+#define GPMI_DEBUG2_SYND2GPMI_BE_OFFSET 12
+#define GPMI_DEBUG2_GPMI2SYND_VALID (1 << 11)
+#define GPMI_DEBUG2_GPMI2SYND_READY (1 << 10)
+#define GPMI_DEBUG2_SYND2GPMI_VALID (1 << 9)
+#define GPMI_DEBUG2_SYND2GPMI_READY (1 << 8)
+#define GPMI_DEBUG2_VIEW_DELAYED_RDN (1 << 7)
+#define GPMI_DEBUG2_UPDATE_WINDOW (1 << 6)
+#define GPMI_DEBUG2_RDN_TAP_MASK 0x3f
+#define GPMI_DEBUG2_RDN_TAP_OFFSET 0
+
+#define GPMI_DEBUG3_APB_WORD_CNTR_MASK (0xffff << 16)
+#define GPMI_DEBUG3_APB_WORD_CNTR_OFFSET 16
+#define GPMI_DEBUG3_DEV_WORD_CNTR_MASK 0xffff
+#define GPMI_DEBUG3_DEV_WORD_CNTR_OFFSET 0
+
+#endif /* __MX28_REGS_GPMI_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-i2c.h b/arch/arm/include/asm/arch-mx28/regs-i2c.h
new file mode 100644
index 0000000..30e0ed7
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-i2c.h
@@ -0,0 +1,207 @@
+/*
+ * Freescale i.MX28 I2C Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_I2C_H__
+#define __MX28_REGS_I2C_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_i2c_regs {
+ mx28_reg(hw_i2c_ctrl0)
+ mx28_reg(hw_i2c_timing0)
+ mx28_reg(hw_i2c_timing1)
+ mx28_reg(hw_i2c_timing2)
+ mx28_reg(hw_i2c_ctrl1)
+ mx28_reg(hw_i2c_stat)
+ mx28_reg(hw_i2c_queuectrl)
+ mx28_reg(hw_i2c_queuestat)
+ mx28_reg(hw_i2c_queuecmd)
+ mx28_reg(hw_i2c_queuedata)
+ mx28_reg(hw_i2c_data)
+ mx28_reg(hw_i2c_debug0)
+ mx28_reg(hw_i2c_debug1)
+ mx28_reg(hw_i2c_version)
+};
+#endif
+
+#define I2C_CTRL_SFTRST (1 << 31)
+#define I2C_CTRL_CLKGATE (1 << 30)
+#define I2C_CTRL_RUN (1 << 29)
+#define I2C_CTRL_PREACK (1 << 27)
+#define I2C_CTRL_ACKNOWLEDGE (1 << 26)
+#define I2C_CTRL_SEND_NAK_ON_LAST (1 << 25)
+#define I2C_CTRL_MULTI_MASTER (1 << 23)
+#define I2C_CTRL_CLOCK_HELD (1 << 22)
+#define I2C_CTRL_RETAIN_CLOCK (1 << 21)
+#define I2C_CTRL_POST_SEND_STOP (1 << 20)
+#define I2C_CTRL_PRE_SEND_START (1 << 19)
+#define I2C_CTRL_SLAVE_ADDRESS_ENABLE (1 << 18)
+#define I2C_CTRL_MASTER_MODE (1 << 17)
+#define I2C_CTRL_DIRECTION (1 << 16)
+#define I2C_CTRL_XFER_COUNT_MASK 0xffff
+#define I2C_CTRL_XFER_COUNT_OFFSET 0
+
+#define I2C_TIMING0_HIGH_COUNT_MASK (0x3ff << 16)
+#define I2C_TIMING0_HIGH_COUNT_OFFSET 16
+#define I2C_TIMING0_RCV_COUNT_MASK 0x3ff
+#define I2C_TIMING0_RCV_COUNT_OFFSET 0
+
+#define I2C_TIMING1_LOW_COUNT_MASK (0x3ff << 16)
+#define I2C_TIMING1_LOW_COUNT_OFFSET 16
+#define I2C_TIMING1_XMIT_COUNT_MASK 0x3ff
+#define I2C_TIMING1_XMIT_COUNT_OFFSET 0
+
+#define I2C_TIMING2_BUS_FREE_MASK (0x3ff << 16)
+#define I2C_TIMING2_BUS_FREE_OFFSET 16
+#define I2C_TIMING2_LEADIN_COUNT_MASK 0x3ff
+#define I2C_TIMING2_LEADIN_COUNT_OFFSET 0
+
+#define I2C_CTRL1_RD_QUEUE_IRQ (1 << 30)
+#define I2C_CTRL1_WR_QUEUE_IRQ (1 << 29)
+#define I2C_CTRL1_CLR_GOT_A_NAK (1 << 28)
+#define I2C_CTRL1_ACK_MODE (1 << 27)
+#define I2C_CTRL1_FORCE_DATA_IDLE (1 << 26)
+#define I2C_CTRL1_FORCE_CLK_IDLE (1 << 25)
+#define I2C_CTRL1_BCAST_SLAVE_EN (1 << 24)
+#define I2C_CTRL1_SLAVE_ADDRESS_BYTE_MASK (0xff << 16)
+#define I2C_CTRL1_SLAVE_ADDRESS_BYTE_OFFSET 16
+#define I2C_CTRL1_BUS_FREE_IRQ_EN (1 << 15)
+#define I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ_EN (1 << 14)
+#define I2C_CTRL1_NO_SLAVE_ACK_IRQ_EN (1 << 13)
+#define I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ_EN (1 << 12)
+#define I2C_CTRL1_EARLY_TERM_IRQ_EN (1 << 11)
+#define I2C_CTRL1_MASTER_LOSS_IRQ_EN (1 << 10)
+#define I2C_CTRL1_SLAVE_STOP_IRQ_EN (1 << 9)
+#define I2C_CTRL1_SLAVE_IRQ_EN (1 << 8)
+#define I2C_CTRL1_BUS_FREE_IRQ (1 << 7)
+#define I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ (1 << 6)
+#define I2C_CTRL1_NO_SLAVE_ACK_IRQ (1 << 5)
+#define I2C_CTRL1_OVERSIZE_XFER_TERM_IRQ (1 << 4)
+#define I2C_CTRL1_EARLY_TERM_IRQ (1 << 3)
+#define I2C_CTRL1_MASTER_LOSS_IRQ (1 << 2)
+#define I2C_CTRL1_SLAVE_STOP_IRQ (1 << 1)
+#define I2C_CTRL1_SLAVE_IRQ (1 << 0)
+
+#define I2C_STAT_MASTER_PRESENT (1 << 31)
+#define I2C_STAT_SLAVE_PRESENT (1 << 30)
+#define I2C_STAT_ANY_ENABLED_IRQ (1 << 29)
+#define I2C_STAT_GOT_A_NAK (1 << 28)
+#define I2C_STAT_RCVD_SLAVE_ADDR_MASK (0xff << 16)
+#define I2C_STAT_RCVD_SLAVE_ADDR_OFFSET 16
+#define I2C_STAT_SLAVE_ADDR_EQ_ZERO (1 << 15)
+#define I2C_STAT_SLAVE_FOUND (1 << 14)
+#define I2C_STAT_SLAVE_SEARCHING (1 << 13)
+#define I2C_STAT_DATA_ENGING_DMA_WAIT (1 << 12)
+#define I2C_STAT_BUS_BUSY (1 << 11)
+#define I2C_STAT_CLK_GEN_BUSY (1 << 10)
+#define I2C_STAT_DATA_ENGINE_BUSY (1 << 9)
+#define I2C_STAT_SLAVE_BUSY (1 << 8)
+#define I2C_STAT_BUS_FREE_IRQ_SUMMARY (1 << 7)
+#define I2C_STAT_DATA_ENGINE_CMPLT_IRQ_SUMMARY (1 << 6)
+#define I2C_STAT_NO_SLAVE_ACK_IRQ_SUMMARY (1 << 5)
+#define I2C_STAT_OVERSIZE_XFER_TERM_IRQ_SUMMARY (1 << 4)
+#define I2C_STAT_EARLY_TERM_IRQ_SUMMARY (1 << 3)
+#define I2C_STAT_MASTER_LOSS_IRQ_SUMMARY (1 << 2)
+#define I2C_STAT_SLAVE_STOP_IRQ_SUMMARY (1 << 1)
+#define I2C_STAT_SLAVE_IRQ_SUMMARY (1 << 0)
+
+#define I2C_QUEUECTRL_RD_THRESH_MASK (0x1f << 16)
+#define I2C_QUEUECTRL_RD_THRESH_OFFSET 16
+#define I2C_QUEUECTRL_WR_THRESH_MASK (0x1f << 8)
+#define I2C_QUEUECTRL_WR_THRESH_OFFSET 8
+#define I2C_QUEUECTRL_QUEUE_RUN (1 << 5)
+#define I2C_QUEUECTRL_RD_CLEAR (1 << 4)
+#define I2C_QUEUECTRL_WR_CLEAR (1 << 3)
+#define I2C_QUEUECTRL_PIO_QUEUE_MODE (1 << 2)
+#define I2C_QUEUECTRL_RD_QUEUE_IRQ_EN (1 << 1)
+#define I2C_QUEUECTRL_WR_QUEUE_IRQ_EN (1 << 0)
+
+#define I2C_QUEUESTAT_RD_QUEUE_FULL (1 << 14)
+#define I2C_QUEUESTAT_RD_QUEUE_EMPTY (1 << 13)
+#define I2C_QUEUESTAT_RD_QUEUE_CNT_MASK (0x1f << 8)
+#define I2C_QUEUESTAT_RD_QUEUE_CNT_OFFSET 8
+#define I2C_QUEUESTAT_WR_QUEUE_FULL (1 << 6)
+#define I2C_QUEUESTAT_WR_QUEUE_EMPTY (1 << 5)
+#define I2C_QUEUESTAT_WR_QUEUE_CNT_MASK 0x1f
+#define I2C_QUEUESTAT_WR_QUEUE_CNT_OFFSET 0
+
+#define I2C_QUEUECMD_PREACK (1 << 27)
+#define I2C_QUEUECMD_ACKNOWLEDGE (1 << 26)
+#define I2C_QUEUECMD_SEND_NAK_ON_LAST (1 << 25)
+#define I2C_QUEUECMD_MULTI_MASTER (1 << 23)
+#define I2C_QUEUECMD_CLOCK_HELD (1 << 22)
+#define I2C_QUEUECMD_RETAIN_CLOCK (1 << 21)
+#define I2C_QUEUECMD_POST_SEND_STOP (1 << 20)
+#define I2C_QUEUECMD_PRE_SEND_START (1 << 19)
+#define I2C_QUEUECMD_SLAVE_ADDRESS_ENABLE (1 << 18)
+#define I2C_QUEUECMD_MASTER_MODE (1 << 17)
+#define I2C_QUEUECMD_DIRECTION (1 << 16)
+#define I2C_QUEUECMD_XFER_COUNT_MASK 0xffff
+#define I2C_QUEUECMD_XFER_COUNT_OFFSET 0
+
+#define I2C_QUEUEDATA_DATA_MASK 0xffffffff
+#define I2C_QUEUEDATA_DATA_OFFSET 0
+
+#define I2C_DATA_DATA_MASK 0xffffffff
+#define I2C_DATA_DATA_OFFSET 0
+
+#define I2C_DEBUG0_DMAREQ (1 << 31)
+#define I2C_DEBUG0_DMAENDCMD (1 << 30)
+#define I2C_DEBUG0_DMAKICK (1 << 29)
+#define I2C_DEBUG0_DMATERMINATE (1 << 28)
+#define I2C_DEBUG0_STATE_VALUE_MASK (0x3 << 26)
+#define I2C_DEBUG0_STATE_VALUE_OFFSET 26
+#define I2C_DEBUG0_DMA_STATE_MASK (0x3ff << 16)
+#define I2C_DEBUG0_DMA_STATE_OFFSET 16
+#define I2C_DEBUG0_START_TOGGLE (1 << 15)
+#define I2C_DEBUG0_STOP_TOGGLE (1 << 14)
+#define I2C_DEBUG0_GRAB_TOGGLE (1 << 13)
+#define I2C_DEBUG0_CHANGE_TOGGLE (1 << 12)
+#define I2C_DEBUG0_STATE_LATCH (1 << 11)
+#define I2C_DEBUG0_SLAVE_HOLD_CLK (1 << 10)
+#define I2C_DEBUG0_STATE_STATE_MASK 0x3ff
+#define I2C_DEBUG0_STATE_STATE_OFFSET 0
+
+#define I2C_DEBUG1_I2C_CLK_IN (1 << 31)
+#define I2C_DEBUG1_I2C_DATA_IN (1 << 30)
+#define I2C_DEBUG1_DMA_BYTE_ENABLES_MASK (0xf << 24)
+#define I2C_DEBUG1_DMA_BYTE_ENABLES_OFFSET 24
+#define I2C_DEBUG1_CLK_GEN_STATE_MASK (0xff << 16)
+#define I2C_DEBUG1_CLK_GEN_STATE_OFFSET 16
+#define I2C_DEBUG1_LST_MODE_MASK (0x3 << 9)
+#define I2C_DEBUG1_LST_MODE_OFFSET 9
+#define I2C_DEBUG1_LOCAL_SLAVE_TEST (1 << 8)
+#define I2C_DEBUG1_FORCE_CLK_ON (1 << 4)
+#define I2C_DEBUG1_FORCE_ABR_LOSS (1 << 3)
+#define I2C_DEBUG1_FORCE_RCV_ACK (1 << 2)
+#define I2C_DEBUG1_FORCE_I2C_DATA_OE (1 << 1)
+#define I2C_DEBUG1_FORCE_I2C_CLK_OE (1 << 0)
+
+#define I2C_VERSION_MAJOR_MASK (0xff << 24)
+#define I2C_VERSION_MAJOR_OFFSET 24
+#define I2C_VERSION_MINOR_MASK (0xff << 16)
+#define I2C_VERSION_MINOR_OFFSET 16
+#define I2C_VERSION_STEP_MASK 0xffff
+#define I2C_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_I2C_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-ocotp.h b/arch/arm/include/asm/arch-mx28/regs-ocotp.h
new file mode 100644
index 0000000..ea2fd7b
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-ocotp.h
@@ -0,0 +1,173 @@
+/*
+ * Freescale i.MX28 OCOTP Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_OCOTP_H__
+#define __MX28_REGS_OCOTP_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_ocotp_regs {
+ mx28_reg(hw_ocotp_ctrl) /* 0x0 */
+ mx28_reg(hw_ocotp_data) /* 0x10 */
+ mx28_reg(hw_ocotp_cust0) /* 0x20 */
+ mx28_reg(hw_ocotp_cust1) /* 0x30 */
+ mx28_reg(hw_ocotp_cust2) /* 0x40 */
+ mx28_reg(hw_ocotp_cust3) /* 0x50 */
+ mx28_reg(hw_ocotp_crypto0) /* 0x60 */
+ mx28_reg(hw_ocotp_crypto1) /* 0x70 */
+ mx28_reg(hw_ocotp_crypto2) /* 0x80 */
+ mx28_reg(hw_ocotp_crypto3) /* 0x90 */
+ mx28_reg(hw_ocotp_hwcap0) /* 0xa0 */
+ mx28_reg(hw_ocotp_hwcap1) /* 0xb0 */
+ mx28_reg(hw_ocotp_hwcap2) /* 0xc0 */
+ mx28_reg(hw_ocotp_hwcap3) /* 0xd0 */
+ mx28_reg(hw_ocotp_hwcap4) /* 0xe0 */
+ mx28_reg(hw_ocotp_hwcap5) /* 0xf0 */
+ mx28_reg(hw_ocotp_swcap) /* 0x100 */
+ mx28_reg(hw_ocotp_custcap) /* 0x110 */
+ mx28_reg(hw_ocotp_lock) /* 0x120 */
+ mx28_reg(hw_ocotp_ops0) /* 0x130 */
+ mx28_reg(hw_ocotp_ops1) /* 0x140 */
+ mx28_reg(hw_ocotp_ops2) /* 0x150 */
+ mx28_reg(hw_ocotp_ops3) /* 0x160 */
+ mx28_reg(hw_ocotp_un0) /* 0x170 */
+ mx28_reg(hw_ocotp_un1) /* 0x180 */
+ mx28_reg(hw_ocotp_un2) /* 0x190 */
+ mx28_reg(hw_ocotp_rom0) /* 0x1a0 */
+ mx28_reg(hw_ocotp_rom1) /* 0x1b0 */
+ mx28_reg(hw_ocotp_rom2) /* 0x1c0 */
+ mx28_reg(hw_ocotp_rom3) /* 0x1d0 */
+ mx28_reg(hw_ocotp_rom4) /* 0x1e0 */
+ mx28_reg(hw_ocotp_rom5) /* 0x1f0 */
+ mx28_reg(hw_ocotp_rom6) /* 0x200 */
+ mx28_reg(hw_ocotp_rom7) /* 0x210 */
+ mx28_reg(hw_ocotp_srk0) /* 0x220 */
+ mx28_reg(hw_ocotp_srk1) /* 0x230 */
+ mx28_reg(hw_ocotp_srk2) /* 0x240 */
+ mx28_reg(hw_ocotp_srk3) /* 0x250 */
+ mx28_reg(hw_ocotp_srk4) /* 0x260 */
+ mx28_reg(hw_ocotp_srk5) /* 0x270 */
+ mx28_reg(hw_ocotp_srk6) /* 0x280 */
+ mx28_reg(hw_ocotp_srk7) /* 0x290 */
+ mx28_reg(hw_ocotp_version) /* 0x2a0 */
+};
+#endif
+
+#define OCOTP_CTRL_WR_UNLOCK_MASK (0xffff << 16)
+#define OCOTP_CTRL_WR_UNLOCK_OFFSET 16
+#define OCOTP_CTRL_WR_UNLOCK_KEY (0x3e77 << 16)
+#define OCOTP_CTRL_RELOAD_SHADOWS (1 << 13)
+#define OCOTP_CTRL_RD_BANK_OPEN (1 << 12)
+#define OCOTP_CTRL_ERROR (1 << 9)
+#define OCOTP_CTRL_BUSY (1 << 8)
+#define OCOTP_CTRL_ADDR_MASK 0x3f
+#define OCOTP_CTRL_ADDR_OFFSET 0
+
+#define OCOTP_DATA_DATA_MASK 0xffffffff
+#define OCOTP_DATA_DATA_OFFSET 0
+
+#define OCOTP_CUST_BITS_MASK 0xffffffff
+#define OCOTP_CUST_BITS_OFFSET 0
+
+#define OCOTP_CRYPTO_BITS_MASK 0xffffffff
+#define OCOTP_CRYPTO_BITS_OFFSET 0
+
+#define OCOTP_HWCAP_BITS_MASK 0xffffffff
+#define OCOTP_HWCAP_BITS_OFFSET 0
+
+#define OCOTP_SWCAP_BITS_MASK 0xffffffff
+#define OCOTP_SWCAP_BITS_OFFSET 0
+
+#define OCOTP_CUSTCAP_RTC_XTAL_32768_PRESENT (1 << 2)
+#define OCOTP_CUSTCAP_RTC_XTAL_32000_PRESENT (1 << 1)
+
+#define OCOTP_LOCK_ROM7 (1 << 31)
+#define OCOTP_LOCK_ROM6 (1 << 30)
+#define OCOTP_LOCK_ROM5 (1 << 29)
+#define OCOTP_LOCK_ROM4 (1 << 28)
+#define OCOTP_LOCK_ROM3 (1 << 27)
+#define OCOTP_LOCK_ROM2 (1 << 26)
+#define OCOTP_LOCK_ROM1 (1 << 25)
+#define OCOTP_LOCK_ROM0 (1 << 24)
+#define OCOTP_LOCK_HWSW_SHADOW_ALT (1 << 23)
+#define OCOTP_LOCK_CRYPTODCP_ALT (1 << 22)
+#define OCOTP_LOCK_CRYPTOKEY_ALT (1 << 21)
+#define OCOTP_LOCK_PIN (1 << 20)
+#define OCOTP_LOCK_OPS (1 << 19)
+#define OCOTP_LOCK_UN2 (1 << 18)
+#define OCOTP_LOCK_UN1 (1 << 17)
+#define OCOTP_LOCK_UN0 (1 << 16)
+#define OCOTP_LOCK_SRK (1 << 15)
+#define OCOTP_LOCK_UNALLOCATED_MASK (0x7 << 12)
+#define OCOTP_LOCK_UNALLOCATED_OFFSET 12
+#define OCOTP_LOCK_SRK_SHADOW (1 << 11)
+#define OCOTP_LOCK_ROM_SHADOW (1 << 10)
+#define OCOTP_LOCK_CUSTCAP (1 << 9)
+#define OCOTP_LOCK_HWSW (1 << 8)
+#define OCOTP_LOCK_CUSTCAP_SHADOW (1 << 7)
+#define OCOTP_LOCK_HWSW_SHADOW (1 << 6)
+#define OCOTP_LOCK_CRYPTODCP (1 << 5)
+#define OCOTP_LOCK_CRYPTOKEY (1 << 4)
+#define OCOTP_LOCK_CUST3 (1 << 3)
+#define OCOTP_LOCK_CUST2 (1 << 2)
+#define OCOTP_LOCK_CUST1 (1 << 1)
+#define OCOTP_LOCK_CUST0 (1 << 0)
+
+#define OCOTP_OPS_BITS_MASK 0xffffffff
+#define OCOTP_OPS_BITS_OFFSET 0
+
+#define OCOTP_UN_BITS_MASK 0xffffffff
+#define OCOTP_UN_BITS_OFFSET 0
+
+#define OCOTP_ROM_BOOT_MODE_MASK (0xff << 24)
+#define OCOTP_ROM_BOOT_MODE_OFFSET 24
+#define OCOTP_ROM_SD_MMC_MODE_MASK (0x3 << 22)
+#define OCOTP_ROM_SD_MMC_MODE_OFFSET 22
+#define OCOTP_ROM_SD_POWER_GATE_GPIO_MASK (0x3 << 20)
+#define OCOTP_ROM_SD_POWER_GATE_GPIO_OFFSET 20
+#define OCOTP_ROM_SD_POWER_UP_DELAY_MASK (0x3f << 14)
+#define OCOTP_ROM_SD_POWER_UP_DELAY_OFFSET 14
+#define OCOTP_ROM_SD_BUS_WIDTH_MASK (0x3 << 12)
+#define OCOTP_ROM_SD_BUS_WIDTH_OFFSET 12
+#define OCOTP_ROM_SSP_SCK_INDEX_MASK (0xf << 8)
+#define OCOTP_ROM_SSP_SCK_INDEX_OFFSET 8
+#define OCOTP_ROM_EMMC_USE_DDR (1 << 7)
+#define OCOTP_ROM_DISABLE_SPI_NOR_FAST_READ (1 << 6)
+#define OCOTP_ROM_ENABLE_USB_BOOT_SERIAL_NUM (1 << 5)
+#define OCOTP_ROM_ENABLE_UNENCRYPTED_BOOT (1 << 4)
+#define OCOTP_ROM_SD_MBR_BOOT (1 << 3)
+
+#define OCOTP_SRK_BITS_MASK 0xffffffff
+#define OCOTP_SRK_BITS_OFFSET 0
+
+#define OCOTP_VERSION_MAJOR_MASK (0xff << 24)
+#define OCOTP_VERSION_MAJOR_OFFSET 24
+#define OCOTP_VERSION_MINOR_MASK (0xff << 16)
+#define OCOTP_VERSION_MINOR_OFFSET 16
+#define OCOTP_VERSION_STEP_MASK 0xffff
+#define OCOTP_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_OCOTP_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-pinctrl.h b/arch/arm/include/asm/arch-mx28/regs-pinctrl.h
new file mode 100644
index 0000000..73739ca
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-pinctrl.h
@@ -0,0 +1,1284 @@
+/*
+ * Freescale i.MX28 PINCTRL Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_PINCTRL_H__
+#define __MX28_REGS_PINCTRL_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_pinctrl_regs {
+ mx28_reg(hw_pinctrl_ctrl) /* 0x0 */
+
+ uint32_t reserved1[60];
+
+ mx28_reg(hw_pinctrl_muxsel0) /* 0x100 */
+ mx28_reg(hw_pinctrl_muxsel1) /* 0x110 */
+ mx28_reg(hw_pinctrl_muxsel2) /* 0x120 */
+ mx28_reg(hw_pinctrl_muxsel3) /* 0x130 */
+ mx28_reg(hw_pinctrl_muxsel4) /* 0x140 */
+ mx28_reg(hw_pinctrl_muxsel5) /* 0x150 */
+ mx28_reg(hw_pinctrl_muxsel6) /* 0x160 */
+ mx28_reg(hw_pinctrl_muxsel7) /* 0x170 */
+ mx28_reg(hw_pinctrl_muxsel8) /* 0x180 */
+ mx28_reg(hw_pinctrl_muxsel9) /* 0x190 */
+ mx28_reg(hw_pinctrl_muxsel10) /* 0x1a0 */
+ mx28_reg(hw_pinctrl_muxsel11) /* 0x1b0 */
+ mx28_reg(hw_pinctrl_muxsel12) /* 0x1c0 */
+ mx28_reg(hw_pinctrl_muxsel13) /* 0x1d0 */
+
+ uint32_t reserved2[72];
+
+ mx28_reg(hw_pinctrl_drive0) /* 0x300 */
+ mx28_reg(hw_pinctrl_drive1) /* 0x310 */
+ mx28_reg(hw_pinctrl_drive2) /* 0x320 */
+ mx28_reg(hw_pinctrl_drive3) /* 0x330 */
+ mx28_reg(hw_pinctrl_drive4) /* 0x340 */
+ mx28_reg(hw_pinctrl_drive5) /* 0x350 */
+ mx28_reg(hw_pinctrl_drive6) /* 0x360 */
+ mx28_reg(hw_pinctrl_drive7) /* 0x370 */
+ mx28_reg(hw_pinctrl_drive8) /* 0x380 */
+ mx28_reg(hw_pinctrl_drive9) /* 0x390 */
+ mx28_reg(hw_pinctrl_drive10) /* 0x3a0 */
+ mx28_reg(hw_pinctrl_drive11) /* 0x3b0 */
+ mx28_reg(hw_pinctrl_drive12) /* 0x3c0 */
+ mx28_reg(hw_pinctrl_drive13) /* 0x3d0 */
+ mx28_reg(hw_pinctrl_drive14) /* 0x3e0 */
+ mx28_reg(hw_pinctrl_drive15) /* 0x3f0 */
+ mx28_reg(hw_pinctrl_drive16) /* 0x400 */
+ mx28_reg(hw_pinctrl_drive17) /* 0x410 */
+ mx28_reg(hw_pinctrl_drive18) /* 0x420 */
+ mx28_reg(hw_pinctrl_drive19) /* 0x430 */
+
+ uint32_t reserved3[112];
+
+ mx28_reg(hw_pinctrl_pull0) /* 0x600 */
+ mx28_reg(hw_pinctrl_pull1) /* 0x610 */
+ mx28_reg(hw_pinctrl_pull2) /* 0x620 */
+ mx28_reg(hw_pinctrl_pull3) /* 0x630 */
+ mx28_reg(hw_pinctrl_pull4) /* 0x640 */
+ mx28_reg(hw_pinctrl_pull5) /* 0x650 */
+ mx28_reg(hw_pinctrl_pull6) /* 0x660 */
+
+ uint32_t reserved4[36];
+
+ mx28_reg(hw_pinctrl_dout0) /* 0x700 */
+ mx28_reg(hw_pinctrl_dout1) /* 0x710 */
+ mx28_reg(hw_pinctrl_dout2) /* 0x720 */
+ mx28_reg(hw_pinctrl_dout3) /* 0x730 */
+ mx28_reg(hw_pinctrl_dout4) /* 0x740 */
+
+ uint32_t reserved5[108];
+
+ mx28_reg(hw_pinctrl_din0) /* 0x900 */
+ mx28_reg(hw_pinctrl_din1) /* 0x910 */
+ mx28_reg(hw_pinctrl_din2) /* 0x920 */
+ mx28_reg(hw_pinctrl_din3) /* 0x930 */
+ mx28_reg(hw_pinctrl_din4) /* 0x940 */
+
+ uint32_t reserved6[108];
+
+ mx28_reg(hw_pinctrl_doe0) /* 0xb00 */
+ mx28_reg(hw_pinctrl_doe1) /* 0xb10 */
+ mx28_reg(hw_pinctrl_doe2) /* 0xb20 */
+ mx28_reg(hw_pinctrl_doe3) /* 0xb30 */
+ mx28_reg(hw_pinctrl_doe4) /* 0xb40 */
+
+ uint32_t reserved7[300];
+
+ mx28_reg(hw_pinctrl_pin2irq0) /* 0x1000 */
+ mx28_reg(hw_pinctrl_pin2irq1) /* 0x1010 */
+ mx28_reg(hw_pinctrl_pin2irq2) /* 0x1020 */
+ mx28_reg(hw_pinctrl_pin2irq3) /* 0x1030 */
+ mx28_reg(hw_pinctrl_pin2irq4) /* 0x1040 */
+
+ uint32_t reserved8[44];
+
+ mx28_reg(hw_pinctrl_irqen0) /* 0x1100 */
+ mx28_reg(hw_pinctrl_irqen1) /* 0x1110 */
+ mx28_reg(hw_pinctrl_irqen2) /* 0x1120 */
+ mx28_reg(hw_pinctrl_irqen3) /* 0x1130 */
+ mx28_reg(hw_pinctrl_irqen4) /* 0x1140 */
+
+ uint32_t reserved9[44];
+
+ mx28_reg(hw_pinctrl_irqlevel0) /* 0x1200 */
+ mx28_reg(hw_pinctrl_irqlevel1) /* 0x1210 */
+ mx28_reg(hw_pinctrl_irqlevel2) /* 0x1220 */
+ mx28_reg(hw_pinctrl_irqlevel3) /* 0x1230 */
+ mx28_reg(hw_pinctrl_irqlevel4) /* 0x1240 */
+
+ uint32_t reserved10[44];
+
+ mx28_reg(hw_pinctrl_irqpol0) /* 0x1300 */
+ mx28_reg(hw_pinctrl_irqpol1) /* 0x1310 */
+ mx28_reg(hw_pinctrl_irqpol2) /* 0x1320 */
+ mx28_reg(hw_pinctrl_irqpol3) /* 0x1330 */
+ mx28_reg(hw_pinctrl_irqpol4) /* 0x1340 */
+
+ uint32_t reserved11[44];
+
+ mx28_reg(hw_pinctrl_irqstat0) /* 0x1400 */
+ mx28_reg(hw_pinctrl_irqstat1) /* 0x1410 */
+ mx28_reg(hw_pinctrl_irqstat2) /* 0x1420 */
+ mx28_reg(hw_pinctrl_irqstat3) /* 0x1430 */
+ mx28_reg(hw_pinctrl_irqstat4) /* 0x1440 */
+
+ uint32_t reserved12[380];
+
+ mx28_reg(hw_pinctrl_emi_odt_ctrl) /* 0x1a40 */
+
+ uint32_t reserved13[76];
+
+ mx28_reg(hw_pinctrl_emi_ds_ctrl) /* 0x1b80 */
+};
+#endif
+
+#define PINCTRL_CTRL_SFTRST (1 << 31)
+#define PINCTRL_CTRL_CLKGATE (1 << 30)
+#define PINCTRL_CTRL_PRESENT4 (1 << 24)
+#define PINCTRL_CTRL_PRESENT3 (1 << 23)
+#define PINCTRL_CTRL_PRESENT2 (1 << 22)
+#define PINCTRL_CTRL_PRESENT1 (1 << 21)
+#define PINCTRL_CTRL_PRESENT0 (1 << 20)
+#define PINCTRL_CTRL_IRQOUT4 (1 << 4)
+#define PINCTRL_CTRL_IRQOUT3 (1 << 3)
+#define PINCTRL_CTRL_IRQOUT2 (1 << 2)
+#define PINCTRL_CTRL_IRQOUT1 (1 << 1)
+#define PINCTRL_CTRL_IRQOUT0 (1 << 0)
+
+#define PINCTRL_MUXSEL0_BANK0_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL0_BANK0_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL0_BANK0_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL0_BANK0_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL0_BANK0_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL0_BANK0_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL0_BANK0_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL0_BANK0_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL0_BANK0_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL0_BANK0_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL0_BANK0_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL0_BANK0_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL0_BANK0_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL0_BANK0_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL0_BANK0_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL0_BANK0_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL1_BANK0_PIN28_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL1_BANK0_PIN28_OFFSET 24
+#define PINCTRL_MUXSEL1_BANK0_PIN27_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL1_BANK0_PIN27_OFFSET 22
+#define PINCTRL_MUXSEL1_BANK0_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL1_BANK0_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL1_BANK0_PIN25_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL1_BANK0_PIN25_OFFSET 18
+#define PINCTRL_MUXSEL1_BANK0_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL1_BANK0_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL1_BANK0_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL1_BANK0_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL1_BANK0_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL1_BANK0_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL1_BANK0_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL1_BANK0_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL1_BANK0_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL1_BANK0_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL1_BANK0_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL1_BANK0_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL1_BANK0_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL1_BANK0_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL1_BANK0_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL1_BANK0_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL1_BANK0_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL1_BANK0_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL2_BANK1_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL2_BANK1_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL2_BANK1_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL2_BANK1_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL2_BANK1_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL2_BANK1_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL2_BANK1_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL2_BANK1_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL2_BANK1_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL2_BANK1_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL2_BANK1_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL2_BANK1_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL2_BANK1_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL2_BANK1_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL2_BANK1_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL2_BANK1_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL2_BANK1_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL2_BANK1_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL2_BANK1_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL2_BANK1_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL2_BANK1_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL2_BANK1_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL2_BANK1_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL2_BANK1_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL2_BANK1_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL2_BANK1_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL2_BANK1_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL2_BANK1_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL2_BANK1_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL2_BANK1_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL2_BANK1_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL2_BANK1_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL3_BANK1_PIN31_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL3_BANK1_PIN31_OFFSET 30
+#define PINCTRL_MUXSEL3_BANK1_PIN30_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL3_BANK1_PIN30_OFFSET 28
+#define PINCTRL_MUXSEL3_BANK1_PIN29_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL3_BANK1_PIN29_OFFSET 26
+#define PINCTRL_MUXSEL3_BANK1_PIN28_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL3_BANK1_PIN28_OFFSET 24
+#define PINCTRL_MUXSEL3_BANK1_PIN27_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL3_BANK1_PIN27_OFFSET 22
+#define PINCTRL_MUXSEL3_BANK1_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL3_BANK1_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL3_BANK1_PIN25_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL3_BANK1_PIN25_OFFSET 18
+#define PINCTRL_MUXSEL3_BANK1_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL3_BANK1_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL3_BANK1_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL3_BANK1_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL3_BANK1_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL3_BANK1_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL3_BANK1_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL3_BANK1_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL3_BANK1_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL3_BANK1_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL3_BANK1_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL3_BANK1_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL3_BANK1_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL3_BANK1_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL3_BANK1_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL3_BANK1_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL3_BANK1_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL3_BANK1_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL4_BANK2_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL4_BANK2_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL4_BANK2_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL4_BANK2_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL4_BANK2_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL4_BANK2_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL4_BANK2_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL4_BANK2_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL4_BANK2_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL4_BANK2_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL4_BANK2_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL4_BANK2_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL4_BANK2_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL4_BANK2_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL4_BANK2_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL4_BANK2_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL4_BANK2_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL4_BANK2_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL4_BANK2_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL4_BANK2_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL4_BANK2_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL4_BANK2_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL4_BANK2_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL4_BANK2_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL4_BANK2_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL4_BANK2_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL4_BANK2_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL4_BANK2_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL4_BANK2_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL4_BANK2_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL5_BANK2_PIN27_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL5_BANK2_PIN27_OFFSET 22
+#define PINCTRL_MUXSEL5_BANK2_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL5_BANK2_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL5_BANK2_PIN25_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL5_BANK2_PIN25_OFFSET 18
+#define PINCTRL_MUXSEL5_BANK2_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL5_BANK2_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL5_BANK2_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL5_BANK2_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL5_BANK2_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL5_BANK2_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL5_BANK2_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL5_BANK2_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL5_BANK2_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL5_BANK2_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL5_BANK2_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL5_BANK2_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL5_BANK2_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL5_BANK2_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL6_BANK3_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL6_BANK3_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL6_BANK3_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL6_BANK3_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL6_BANK3_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL6_BANK3_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL6_BANK3_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL6_BANK3_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL6_BANK3_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL6_BANK3_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL6_BANK3_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL6_BANK3_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL6_BANK3_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL6_BANK3_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL6_BANK3_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL6_BANK3_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL6_BANK3_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL6_BANK3_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL6_BANK3_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL6_BANK3_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL6_BANK3_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL6_BANK3_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL6_BANK3_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL6_BANK3_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL6_BANK3_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL6_BANK3_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL6_BANK3_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL6_BANK3_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL6_BANK3_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL6_BANK3_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL6_BANK3_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL6_BANK3_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL7_BANK3_PIN30_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL7_BANK3_PIN30_OFFSET 28
+#define PINCTRL_MUXSEL7_BANK3_PIN29_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL7_BANK3_PIN29_OFFSET 26
+#define PINCTRL_MUXSEL7_BANK3_PIN28_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL7_BANK3_PIN28_OFFSET 24
+#define PINCTRL_MUXSEL7_BANK3_PIN27_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL7_BANK3_PIN27_OFFSET 22
+#define PINCTRL_MUXSEL7_BANK3_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL7_BANK3_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL7_BANK3_PIN25_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL7_BANK3_PIN25_OFFSET 18
+#define PINCTRL_MUXSEL7_BANK3_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL7_BANK3_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL7_BANK3_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL7_BANK3_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL7_BANK3_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL7_BANK3_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL7_BANK3_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL7_BANK3_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL7_BANK3_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL7_BANK3_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL7_BANK3_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL7_BANK3_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL7_BANK3_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL7_BANK3_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL7_BANK3_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL7_BANK3_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL8_BANK4_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL8_BANK4_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL8_BANK4_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL8_BANK4_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL8_BANK4_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL8_BANK4_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL8_BANK4_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL8_BANK4_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL8_BANK4_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL8_BANK4_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL8_BANK4_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL8_BANK4_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL8_BANK4_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL8_BANK4_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL8_BANK4_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL8_BANK4_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL8_BANK4_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL8_BANK4_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL8_BANK4_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL8_BANK4_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL8_BANK4_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL8_BANK4_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL8_BANK4_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL8_BANK4_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL8_BANK4_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL8_BANK4_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL8_BANK4_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL8_BANK4_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL8_BANK4_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL8_BANK4_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL8_BANK4_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL8_BANK4_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL9_BANK4_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL9_BANK4_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL9_BANK4_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL9_BANK4_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL10_BANK5_PIN15_MASK (0x3 << 30)
+#define PINCTRL_MUXSEL10_BANK5_PIN15_OFFSET 30
+#define PINCTRL_MUXSEL10_BANK5_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL10_BANK5_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL10_BANK5_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL10_BANK5_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL10_BANK5_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL10_BANK5_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL10_BANK5_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL10_BANK5_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL10_BANK5_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL10_BANK5_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL10_BANK5_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL10_BANK5_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL10_BANK5_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL10_BANK5_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL10_BANK5_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL10_BANK5_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL10_BANK5_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL10_BANK5_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL10_BANK5_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL10_BANK5_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL10_BANK5_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL10_BANK5_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL10_BANK5_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL10_BANK5_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL10_BANK5_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL10_BANK5_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL10_BANK5_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL10_BANK5_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL10_BANK5_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL10_BANK5_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL11_BANK5_PIN26_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL11_BANK5_PIN26_OFFSET 20
+#define PINCTRL_MUXSEL11_BANK5_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL11_BANK5_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL11_BANK5_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL11_BANK5_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL11_BANK5_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL11_BANK5_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL11_BANK5_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL11_BANK5_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL11_BANK5_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL11_BANK5_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL11_BANK5_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL11_BANK5_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL11_BANK5_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL11_BANK5_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL11_BANK5_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL11_BANK5_PIN16_OFFSET 0
+
+#define PINCTRL_MUXSEL12_BANK6_PIN14_MASK (0x3 << 28)
+#define PINCTRL_MUXSEL12_BANK6_PIN14_OFFSET 28
+#define PINCTRL_MUXSEL12_BANK6_PIN13_MASK (0x3 << 26)
+#define PINCTRL_MUXSEL12_BANK6_PIN13_OFFSET 26
+#define PINCTRL_MUXSEL12_BANK6_PIN12_MASK (0x3 << 24)
+#define PINCTRL_MUXSEL12_BANK6_PIN12_OFFSET 24
+#define PINCTRL_MUXSEL12_BANK6_PIN11_MASK (0x3 << 22)
+#define PINCTRL_MUXSEL12_BANK6_PIN11_OFFSET 22
+#define PINCTRL_MUXSEL12_BANK6_PIN10_MASK (0x3 << 20)
+#define PINCTRL_MUXSEL12_BANK6_PIN10_OFFSET 20
+#define PINCTRL_MUXSEL12_BANK6_PIN09_MASK (0x3 << 18)
+#define PINCTRL_MUXSEL12_BANK6_PIN09_OFFSET 18
+#define PINCTRL_MUXSEL12_BANK6_PIN08_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL12_BANK6_PIN08_OFFSET 16
+#define PINCTRL_MUXSEL12_BANK6_PIN07_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL12_BANK6_PIN07_OFFSET 14
+#define PINCTRL_MUXSEL12_BANK6_PIN06_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL12_BANK6_PIN06_OFFSET 12
+#define PINCTRL_MUXSEL12_BANK6_PIN05_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL12_BANK6_PIN05_OFFSET 10
+#define PINCTRL_MUXSEL12_BANK6_PIN04_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL12_BANK6_PIN04_OFFSET 8
+#define PINCTRL_MUXSEL12_BANK6_PIN03_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL12_BANK6_PIN03_OFFSET 6
+#define PINCTRL_MUXSEL12_BANK6_PIN02_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL12_BANK6_PIN02_OFFSET 4
+#define PINCTRL_MUXSEL12_BANK6_PIN01_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL12_BANK6_PIN01_OFFSET 2
+#define PINCTRL_MUXSEL12_BANK6_PIN00_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL12_BANK6_PIN00_OFFSET 0
+
+#define PINCTRL_MUXSEL13_BANK6_PIN24_MASK (0x3 << 16)
+#define PINCTRL_MUXSEL13_BANK6_PIN24_OFFSET 16
+#define PINCTRL_MUXSEL13_BANK6_PIN23_MASK (0x3 << 14)
+#define PINCTRL_MUXSEL13_BANK6_PIN23_OFFSET 14
+#define PINCTRL_MUXSEL13_BANK6_PIN22_MASK (0x3 << 12)
+#define PINCTRL_MUXSEL13_BANK6_PIN22_OFFSET 12
+#define PINCTRL_MUXSEL13_BANK6_PIN21_MASK (0x3 << 10)
+#define PINCTRL_MUXSEL13_BANK6_PIN21_OFFSET 10
+#define PINCTRL_MUXSEL13_BANK6_PIN20_MASK (0x3 << 8)
+#define PINCTRL_MUXSEL13_BANK6_PIN20_OFFSET 8
+#define PINCTRL_MUXSEL13_BANK6_PIN19_MASK (0x3 << 6)
+#define PINCTRL_MUXSEL13_BANK6_PIN19_OFFSET 6
+#define PINCTRL_MUXSEL13_BANK6_PIN18_MASK (0x3 << 4)
+#define PINCTRL_MUXSEL13_BANK6_PIN18_OFFSET 4
+#define PINCTRL_MUXSEL13_BANK6_PIN17_MASK (0x3 << 2)
+#define PINCTRL_MUXSEL13_BANK6_PIN17_OFFSET 2
+#define PINCTRL_MUXSEL13_BANK6_PIN16_MASK (0x3 << 0)
+#define PINCTRL_MUXSEL13_BANK6_PIN16_OFFSET 0
+
+#define PINCTRL_DRIVE0_BANK0_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE0_BANK0_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE0_BANK0_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE0_BANK0_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE0_BANK0_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE0_BANK0_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE0_BANK0_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE0_BANK0_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE0_BANK0_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE0_BANK0_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE0_BANK0_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE0_BANK0_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE0_BANK0_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE0_BANK0_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE0_BANK0_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE0_BANK0_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE0_BANK0_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE0_BANK0_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE0_BANK0_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE0_BANK0_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE0_BANK0_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE0_BANK0_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE0_BANK0_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE0_BANK0_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE2_BANK0_PIN23_V (1 << 30)
+#define PINCTRL_DRIVE2_BANK0_PIN23_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE2_BANK0_PIN23_MA_OFFSET 28
+#define PINCTRL_DRIVE2_BANK0_PIN22_V (1 << 26)
+#define PINCTRL_DRIVE2_BANK0_PIN22_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE2_BANK0_PIN22_MA_OFFSET 24
+#define PINCTRL_DRIVE2_BANK0_PIN21_V (1 << 22)
+#define PINCTRL_DRIVE2_BANK0_PIN21_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE2_BANK0_PIN21_MA_OFFSET 20
+#define PINCTRL_DRIVE2_BANK0_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE2_BANK0_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE2_BANK0_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE2_BANK0_PIN19_V (1 << 14)
+#define PINCTRL_DRIVE2_BANK0_PIN19_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE2_BANK0_PIN19_MA_OFFSET 12
+#define PINCTRL_DRIVE2_BANK0_PIN18_V (1 << 10)
+#define PINCTRL_DRIVE2_BANK0_PIN18_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE2_BANK0_PIN18_MA_OFFSET 8
+#define PINCTRL_DRIVE2_BANK0_PIN17_V (1 << 6)
+#define PINCTRL_DRIVE2_BANK0_PIN17_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE2_BANK0_PIN17_MA_OFFSET 4
+#define PINCTRL_DRIVE2_BANK0_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE2_BANK0_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE2_BANK0_PIN16_MA_OFFSET 0
+
+#define PINCTRL_DRIVE3_BANK0_PIN28_V (1 << 18)
+#define PINCTRL_DRIVE3_BANK0_PIN28_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE3_BANK0_PIN28_MA_OFFSET 16
+#define PINCTRL_DRIVE3_BANK0_PIN27_V (1 << 14)
+#define PINCTRL_DRIVE3_BANK0_PIN27_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE3_BANK0_PIN27_MA_OFFSET 12
+#define PINCTRL_DRIVE3_BANK0_PIN26_V (1 << 10)
+#define PINCTRL_DRIVE3_BANK0_PIN26_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE3_BANK0_PIN26_MA_OFFSET 8
+#define PINCTRL_DRIVE3_BANK0_PIN25_V (1 << 6)
+#define PINCTRL_DRIVE3_BANK0_PIN25_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE3_BANK0_PIN25_MA_OFFSET 4
+#define PINCTRL_DRIVE3_BANK0_PIN24_V (1 << 2)
+#define PINCTRL_DRIVE3_BANK0_PIN24_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE3_BANK0_PIN24_MA_OFFSET 0
+
+#define PINCTRL_DRIVE4_BANK1_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE4_BANK1_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE4_BANK1_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE4_BANK1_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE4_BANK1_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE4_BANK1_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE4_BANK1_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE4_BANK1_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE4_BANK1_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE4_BANK1_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE4_BANK1_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE4_BANK1_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE4_BANK1_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE4_BANK1_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE4_BANK1_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE4_BANK1_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE4_BANK1_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE4_BANK1_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE4_BANK1_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE4_BANK1_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE4_BANK1_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE4_BANK1_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE4_BANK1_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE4_BANK1_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE5_BANK1_PIN15_V (1 << 30)
+#define PINCTRL_DRIVE5_BANK1_PIN15_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE5_BANK1_PIN15_MA_OFFSET 28
+#define PINCTRL_DRIVE5_BANK1_PIN14_V (1 << 26)
+#define PINCTRL_DRIVE5_BANK1_PIN14_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE5_BANK1_PIN14_MA_OFFSET 24
+#define PINCTRL_DRIVE5_BANK1_PIN13_V (1 << 22)
+#define PINCTRL_DRIVE5_BANK1_PIN13_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE5_BANK1_PIN13_MA_OFFSET 20
+#define PINCTRL_DRIVE5_BANK1_PIN12_V (1 << 18)
+#define PINCTRL_DRIVE5_BANK1_PIN12_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE5_BANK1_PIN12_MA_OFFSET 16
+#define PINCTRL_DRIVE5_BANK1_PIN11_V (1 << 14)
+#define PINCTRL_DRIVE5_BANK1_PIN11_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE5_BANK1_PIN11_MA_OFFSET 12
+#define PINCTRL_DRIVE5_BANK1_PIN10_V (1 << 10)
+#define PINCTRL_DRIVE5_BANK1_PIN10_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE5_BANK1_PIN10_MA_OFFSET 8
+#define PINCTRL_DRIVE5_BANK1_PIN09_V (1 << 6)
+#define PINCTRL_DRIVE5_BANK1_PIN09_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE5_BANK1_PIN09_MA_OFFSET 4
+#define PINCTRL_DRIVE5_BANK1_PIN08_V (1 << 2)
+#define PINCTRL_DRIVE5_BANK1_PIN08_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE5_BANK1_PIN08_MA_OFFSET 0
+
+#define PINCTRL_DRIVE6_BANK1_PIN23_V (1 << 30)
+#define PINCTRL_DRIVE6_BANK1_PIN23_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE6_BANK1_PIN23_MA_OFFSET 28
+#define PINCTRL_DRIVE6_BANK1_PIN22_V (1 << 26)
+#define PINCTRL_DRIVE6_BANK1_PIN22_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE6_BANK1_PIN22_MA_OFFSET 24
+#define PINCTRL_DRIVE6_BANK1_PIN21_V (1 << 22)
+#define PINCTRL_DRIVE6_BANK1_PIN21_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE6_BANK1_PIN21_MA_OFFSET 20
+#define PINCTRL_DRIVE6_BANK1_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE6_BANK1_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE6_BANK1_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE6_BANK1_PIN19_V (1 << 14)
+#define PINCTRL_DRIVE6_BANK1_PIN19_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE6_BANK1_PIN19_MA_OFFSET 12
+#define PINCTRL_DRIVE6_BANK1_PIN18_V (1 << 10)
+#define PINCTRL_DRIVE6_BANK1_PIN18_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE6_BANK1_PIN18_MA_OFFSET 8
+#define PINCTRL_DRIVE6_BANK1_PIN17_V (1 << 6)
+#define PINCTRL_DRIVE6_BANK1_PIN17_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE6_BANK1_PIN17_MA_OFFSET 4
+#define PINCTRL_DRIVE6_BANK1_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE6_BANK1_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE6_BANK1_PIN16_MA_OFFSET 0
+
+#define PINCTRL_DRIVE7_BANK1_PIN31_V (1 << 30)
+#define PINCTRL_DRIVE7_BANK1_PIN31_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE7_BANK1_PIN31_MA_OFFSET 28
+#define PINCTRL_DRIVE7_BANK1_PIN30_V (1 << 26)
+#define PINCTRL_DRIVE7_BANK1_PIN30_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE7_BANK1_PIN30_MA_OFFSET 24
+#define PINCTRL_DRIVE7_BANK1_PIN29_V (1 << 22)
+#define PINCTRL_DRIVE7_BANK1_PIN29_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE7_BANK1_PIN29_MA_OFFSET 20
+#define PINCTRL_DRIVE7_BANK1_PIN28_V (1 << 18)
+#define PINCTRL_DRIVE7_BANK1_PIN28_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE7_BANK1_PIN28_MA_OFFSET 16
+#define PINCTRL_DRIVE7_BANK1_PIN27_V (1 << 14)
+#define PINCTRL_DRIVE7_BANK1_PIN27_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE7_BANK1_PIN27_MA_OFFSET 12
+#define PINCTRL_DRIVE7_BANK1_PIN26_V (1 << 10)
+#define PINCTRL_DRIVE7_BANK1_PIN26_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE7_BANK1_PIN26_MA_OFFSET 8
+#define PINCTRL_DRIVE7_BANK1_PIN25_V (1 << 6)
+#define PINCTRL_DRIVE7_BANK1_PIN25_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE7_BANK1_PIN25_MA_OFFSET 4
+#define PINCTRL_DRIVE7_BANK1_PIN24_V (1 << 2)
+#define PINCTRL_DRIVE7_BANK1_PIN24_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE7_BANK1_PIN24_MA_OFFSET 0
+
+#define PINCTRL_DRIVE8_BANK2_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE8_BANK2_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE8_BANK2_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE8_BANK2_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE8_BANK2_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE8_BANK2_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE8_BANK2_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE8_BANK2_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE8_BANK2_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE8_BANK2_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE8_BANK2_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE8_BANK2_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE8_BANK2_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE8_BANK2_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE8_BANK2_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE8_BANK2_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE8_BANK2_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE8_BANK2_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE8_BANK2_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE8_BANK2_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE8_BANK2_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE8_BANK2_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE8_BANK2_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE8_BANK2_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE9_BANK2_PIN15_V (1 << 30)
+#define PINCTRL_DRIVE9_BANK2_PIN15_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE9_BANK2_PIN15_MA_OFFSET 28
+#define PINCTRL_DRIVE9_BANK2_PIN14_V (1 << 26)
+#define PINCTRL_DRIVE9_BANK2_PIN14_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE9_BANK2_PIN14_MA_OFFSET 24
+#define PINCTRL_DRIVE9_BANK2_PIN13_V (1 << 22)
+#define PINCTRL_DRIVE9_BANK2_PIN13_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE9_BANK2_PIN13_MA_OFFSET 20
+#define PINCTRL_DRIVE9_BANK2_PIN12_V (1 << 18)
+#define PINCTRL_DRIVE9_BANK2_PIN12_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE9_BANK2_PIN12_MA_OFFSET 16
+#define PINCTRL_DRIVE9_BANK2_PIN10_V (1 << 10)
+#define PINCTRL_DRIVE9_BANK2_PIN10_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE9_BANK2_PIN10_MA_OFFSET 8
+#define PINCTRL_DRIVE9_BANK2_PIN09_V (1 << 6)
+#define PINCTRL_DRIVE9_BANK2_PIN09_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE9_BANK2_PIN09_MA_OFFSET 4
+#define PINCTRL_DRIVE9_BANK2_PIN08_V (1 << 2)
+#define PINCTRL_DRIVE9_BANK2_PIN08_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE9_BANK2_PIN08_MA_OFFSET 0
+
+#define PINCTRL_DRIVE10_BANK2_PIN21_V (1 << 22)
+#define PINCTRL_DRIVE10_BANK2_PIN21_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE10_BANK2_PIN21_MA_OFFSET 20
+#define PINCTRL_DRIVE10_BANK2_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE10_BANK2_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE10_BANK2_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE10_BANK2_PIN19_V (1 << 14)
+#define PINCTRL_DRIVE10_BANK2_PIN19_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE10_BANK2_PIN19_MA_OFFSET 12
+#define PINCTRL_DRIVE10_BANK2_PIN18_V (1 << 10)
+#define PINCTRL_DRIVE10_BANK2_PIN18_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE10_BANK2_PIN18_MA_OFFSET 8
+#define PINCTRL_DRIVE10_BANK2_PIN17_V (1 << 6)
+#define PINCTRL_DRIVE10_BANK2_PIN17_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE10_BANK2_PIN17_MA_OFFSET 4
+#define PINCTRL_DRIVE10_BANK2_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE10_BANK2_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE10_BANK2_PIN16_MA_OFFSET 0
+
+#define PINCTRL_DRIVE11_BANK2_PIN27_V (1 << 14)
+#define PINCTRL_DRIVE11_BANK2_PIN27_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE11_BANK2_PIN27_MA_OFFSET 12
+#define PINCTRL_DRIVE11_BANK2_PIN26_V (1 << 10)
+#define PINCTRL_DRIVE11_BANK2_PIN26_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE11_BANK2_PIN26_MA_OFFSET 8
+#define PINCTRL_DRIVE11_BANK2_PIN25_V (1 << 6)
+#define PINCTRL_DRIVE11_BANK2_PIN25_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE11_BANK2_PIN25_MA_OFFSET 4
+#define PINCTRL_DRIVE11_BANK2_PIN24_V (1 << 2)
+#define PINCTRL_DRIVE11_BANK2_PIN24_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE11_BANK2_PIN24_MA_OFFSET 0
+
+#define PINCTRL_DRIVE12_BANK3_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE12_BANK3_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE12_BANK3_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE12_BANK3_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE12_BANK3_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE12_BANK3_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE12_BANK3_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE12_BANK3_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE12_BANK3_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE12_BANK3_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE12_BANK3_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE12_BANK3_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE12_BANK3_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE12_BANK3_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE12_BANK3_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE12_BANK3_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE12_BANK3_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE12_BANK3_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE12_BANK3_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE12_BANK3_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE12_BANK3_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE12_BANK3_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE12_BANK3_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE12_BANK3_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE13_BANK3_PIN15_V (1 << 30)
+#define PINCTRL_DRIVE13_BANK3_PIN15_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE13_BANK3_PIN15_MA_OFFSET 28
+#define PINCTRL_DRIVE13_BANK3_PIN14_V (1 << 26)
+#define PINCTRL_DRIVE13_BANK3_PIN14_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE13_BANK3_PIN14_MA_OFFSET 24
+#define PINCTRL_DRIVE13_BANK3_PIN13_V (1 << 22)
+#define PINCTRL_DRIVE13_BANK3_PIN13_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE13_BANK3_PIN13_MA_OFFSET 20
+#define PINCTRL_DRIVE13_BANK3_PIN12_V (1 << 18)
+#define PINCTRL_DRIVE13_BANK3_PIN12_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE13_BANK3_PIN12_MA_OFFSET 16
+#define PINCTRL_DRIVE13_BANK3_PIN11_V (1 << 14)
+#define PINCTRL_DRIVE13_BANK3_PIN11_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE13_BANK3_PIN11_MA_OFFSET 12
+#define PINCTRL_DRIVE13_BANK3_PIN10_V (1 << 10)
+#define PINCTRL_DRIVE13_BANK3_PIN10_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE13_BANK3_PIN10_MA_OFFSET 8
+#define PINCTRL_DRIVE13_BANK3_PIN09_V (1 << 6)
+#define PINCTRL_DRIVE13_BANK3_PIN09_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE13_BANK3_PIN09_MA_OFFSET 4
+#define PINCTRL_DRIVE13_BANK3_PIN08_V (1 << 2)
+#define PINCTRL_DRIVE13_BANK3_PIN08_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE13_BANK3_PIN08_MA_OFFSET 0
+
+#define PINCTRL_DRIVE14_BANK3_PIN23_V (1 << 30)
+#define PINCTRL_DRIVE14_BANK3_PIN23_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE14_BANK3_PIN23_MA_OFFSET 28
+#define PINCTRL_DRIVE14_BANK3_PIN22_V (1 << 26)
+#define PINCTRL_DRIVE14_BANK3_PIN22_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE14_BANK3_PIN22_MA_OFFSET 24
+#define PINCTRL_DRIVE14_BANK3_PIN21_V (1 << 22)
+#define PINCTRL_DRIVE14_BANK3_PIN21_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE14_BANK3_PIN21_MA_OFFSET 20
+#define PINCTRL_DRIVE14_BANK3_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE14_BANK3_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE14_BANK3_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE14_BANK3_PIN18_V (1 << 10)
+#define PINCTRL_DRIVE14_BANK3_PIN18_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE14_BANK3_PIN18_MA_OFFSET 8
+#define PINCTRL_DRIVE14_BANK3_PIN17_V (1 << 6)
+#define PINCTRL_DRIVE14_BANK3_PIN17_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE14_BANK3_PIN17_MA_OFFSET 4
+#define PINCTRL_DRIVE14_BANK3_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE14_BANK3_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE14_BANK3_PIN16_MA_OFFSET 0
+
+#define PINCTRL_DRIVE15_BANK3_PIN30_V (1 << 26)
+#define PINCTRL_DRIVE15_BANK3_PIN30_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE15_BANK3_PIN30_MA_OFFSET 24
+#define PINCTRL_DRIVE15_BANK3_PIN29_V (1 << 22)
+#define PINCTRL_DRIVE15_BANK3_PIN29_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE15_BANK3_PIN29_MA_OFFSET 20
+#define PINCTRL_DRIVE15_BANK3_PIN28_V (1 << 18)
+#define PINCTRL_DRIVE15_BANK3_PIN28_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE15_BANK3_PIN28_MA_OFFSET 16
+#define PINCTRL_DRIVE15_BANK3_PIN27_V (1 << 14)
+#define PINCTRL_DRIVE15_BANK3_PIN27_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE15_BANK3_PIN27_MA_OFFSET 12
+#define PINCTRL_DRIVE15_BANK3_PIN26_V (1 << 10)
+#define PINCTRL_DRIVE15_BANK3_PIN26_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE15_BANK3_PIN26_MA_OFFSET 8
+#define PINCTRL_DRIVE15_BANK3_PIN25_V (1 << 6)
+#define PINCTRL_DRIVE15_BANK3_PIN25_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE15_BANK3_PIN25_MA_OFFSET 4
+#define PINCTRL_DRIVE15_BANK3_PIN24_V (1 << 2)
+#define PINCTRL_DRIVE15_BANK3_PIN24_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE15_BANK3_PIN24_MA_OFFSET 0
+
+#define PINCTRL_DRIVE16_BANK4_PIN07_V (1 << 30)
+#define PINCTRL_DRIVE16_BANK4_PIN07_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE16_BANK4_PIN07_MA_OFFSET 28
+#define PINCTRL_DRIVE16_BANK4_PIN06_V (1 << 26)
+#define PINCTRL_DRIVE16_BANK4_PIN06_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE16_BANK4_PIN06_MA_OFFSET 24
+#define PINCTRL_DRIVE16_BANK4_PIN05_V (1 << 22)
+#define PINCTRL_DRIVE16_BANK4_PIN05_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE16_BANK4_PIN05_MA_OFFSET 20
+#define PINCTRL_DRIVE16_BANK4_PIN04_V (1 << 18)
+#define PINCTRL_DRIVE16_BANK4_PIN04_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE16_BANK4_PIN04_MA_OFFSET 16
+#define PINCTRL_DRIVE16_BANK4_PIN03_V (1 << 14)
+#define PINCTRL_DRIVE16_BANK4_PIN03_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE16_BANK4_PIN03_MA_OFFSET 12
+#define PINCTRL_DRIVE16_BANK4_PIN02_V (1 << 10)
+#define PINCTRL_DRIVE16_BANK4_PIN02_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE16_BANK4_PIN02_MA_OFFSET 8
+#define PINCTRL_DRIVE16_BANK4_PIN01_V (1 << 6)
+#define PINCTRL_DRIVE16_BANK4_PIN01_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE16_BANK4_PIN01_MA_OFFSET 4
+#define PINCTRL_DRIVE16_BANK4_PIN00_V (1 << 2)
+#define PINCTRL_DRIVE16_BANK4_PIN00_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE16_BANK4_PIN00_MA_OFFSET 0
+
+#define PINCTRL_DRIVE17_BANK4_PIN15_V (1 << 30)
+#define PINCTRL_DRIVE17_BANK4_PIN15_MA_MASK (0x3 << 28)
+#define PINCTRL_DRIVE17_BANK4_PIN15_MA_OFFSET 28
+#define PINCTRL_DRIVE17_BANK4_PIN14_V (1 << 26)
+#define PINCTRL_DRIVE17_BANK4_PIN14_MA_MASK (0x3 << 24)
+#define PINCTRL_DRIVE17_BANK4_PIN14_MA_OFFSET 24
+#define PINCTRL_DRIVE17_BANK4_PIN13_V (1 << 22)
+#define PINCTRL_DRIVE17_BANK4_PIN13_MA_MASK (0x3 << 20)
+#define PINCTRL_DRIVE17_BANK4_PIN13_MA_OFFSET 20
+#define PINCTRL_DRIVE17_BANK4_PIN12_V (1 << 18)
+#define PINCTRL_DRIVE17_BANK4_PIN12_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE17_BANK4_PIN12_MA_OFFSET 16
+#define PINCTRL_DRIVE17_BANK4_PIN11_V (1 << 14)
+#define PINCTRL_DRIVE17_BANK4_PIN11_MA_MASK (0x3 << 12)
+#define PINCTRL_DRIVE17_BANK4_PIN11_MA_OFFSET 12
+#define PINCTRL_DRIVE17_BANK4_PIN10_V (1 << 10)
+#define PINCTRL_DRIVE17_BANK4_PIN10_MA_MASK (0x3 << 8)
+#define PINCTRL_DRIVE17_BANK4_PIN10_MA_OFFSET 8
+#define PINCTRL_DRIVE17_BANK4_PIN09_V (1 << 6)
+#define PINCTRL_DRIVE17_BANK4_PIN09_MA_MASK (0x3 << 4)
+#define PINCTRL_DRIVE17_BANK4_PIN09_MA_OFFSET 4
+#define PINCTRL_DRIVE17_BANK4_PIN08_V (1 << 2)
+#define PINCTRL_DRIVE17_BANK4_PIN08_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE17_BANK4_PIN08_MA_OFFSET 0
+
+#define PINCTRL_DRIVE18_BANK4_PIN20_V (1 << 18)
+#define PINCTRL_DRIVE18_BANK4_PIN20_MA_MASK (0x3 << 16)
+#define PINCTRL_DRIVE18_BANK4_PIN20_MA_OFFSET 16
+#define PINCTRL_DRIVE18_BANK4_PIN16_V (1 << 2)
+#define PINCTRL_DRIVE18_BANK4_PIN16_MA_MASK (0x3 << 0)
+#define PINCTRL_DRIVE18_BANK4_PIN16_MA_OFFSET 0
+
+#define PINCTRL_PULL0_BANK0_PIN28 (1 << 28)
+#define PINCTRL_PULL0_BANK0_PIN27 (1 << 27)
+#define PINCTRL_PULL0_BANK0_PIN26 (1 << 26)
+#define PINCTRL_PULL0_BANK0_PIN25 (1 << 25)
+#define PINCTRL_PULL0_BANK0_PIN24 (1 << 24)
+#define PINCTRL_PULL0_BANK0_PIN23 (1 << 23)
+#define PINCTRL_PULL0_BANK0_PIN22 (1 << 22)
+#define PINCTRL_PULL0_BANK0_PIN21 (1 << 21)
+#define PINCTRL_PULL0_BANK0_PIN20 (1 << 20)
+#define PINCTRL_PULL0_BANK0_PIN19 (1 << 19)
+#define PINCTRL_PULL0_BANK0_PIN18 (1 << 18)
+#define PINCTRL_PULL0_BANK0_PIN17 (1 << 17)
+#define PINCTRL_PULL0_BANK0_PIN16 (1 << 16)
+#define PINCTRL_PULL0_BANK0_PIN07 (1 << 7)
+#define PINCTRL_PULL0_BANK0_PIN06 (1 << 6)
+#define PINCTRL_PULL0_BANK0_PIN05 (1 << 5)
+#define PINCTRL_PULL0_BANK0_PIN04 (1 << 4)
+#define PINCTRL_PULL0_BANK0_PIN03 (1 << 3)
+#define PINCTRL_PULL0_BANK0_PIN02 (1 << 2)
+#define PINCTRL_PULL0_BANK0_PIN01 (1 << 1)
+#define PINCTRL_PULL0_BANK0_PIN00 (1 << 0)
+
+#define PINCTRL_PULL1_BANK1_PIN31 (1 << 31)
+#define PINCTRL_PULL1_BANK1_PIN30 (1 << 30)
+#define PINCTRL_PULL1_BANK1_PIN29 (1 << 29)
+#define PINCTRL_PULL1_BANK1_PIN28 (1 << 28)
+#define PINCTRL_PULL1_BANK1_PIN27 (1 << 27)
+#define PINCTRL_PULL1_BANK1_PIN26 (1 << 26)
+#define PINCTRL_PULL1_BANK1_PIN25 (1 << 25)
+#define PINCTRL_PULL1_BANK1_PIN24 (1 << 24)
+#define PINCTRL_PULL1_BANK1_PIN23 (1 << 23)
+#define PINCTRL_PULL1_BANK1_PIN22 (1 << 22)
+#define PINCTRL_PULL1_BANK1_PIN21 (1 << 21)
+#define PINCTRL_PULL1_BANK1_PIN20 (1 << 20)
+#define PINCTRL_PULL1_BANK1_PIN19 (1 << 19)
+#define PINCTRL_PULL1_BANK1_PIN18 (1 << 18)
+#define PINCTRL_PULL1_BANK1_PIN17 (1 << 17)
+#define PINCTRL_PULL1_BANK1_PIN16 (1 << 16)
+#define PINCTRL_PULL1_BANK1_PIN15 (1 << 15)
+#define PINCTRL_PULL1_BANK1_PIN14 (1 << 14)
+#define PINCTRL_PULL1_BANK1_PIN13 (1 << 13)
+#define PINCTRL_PULL1_BANK1_PIN12 (1 << 12)
+#define PINCTRL_PULL1_BANK1_PIN11 (1 << 11)
+#define PINCTRL_PULL1_BANK1_PIN10 (1 << 10)
+#define PINCTRL_PULL1_BANK1_PIN09 (1 << 9)
+#define PINCTRL_PULL1_BANK1_PIN08 (1 << 8)
+#define PINCTRL_PULL1_BANK1_PIN07 (1 << 7)
+#define PINCTRL_PULL1_BANK1_PIN06 (1 << 6)
+#define PINCTRL_PULL1_BANK1_PIN05 (1 << 5)
+#define PINCTRL_PULL1_BANK1_PIN04 (1 << 4)
+#define PINCTRL_PULL1_BANK1_PIN03 (1 << 3)
+#define PINCTRL_PULL1_BANK1_PIN02 (1 << 2)
+#define PINCTRL_PULL1_BANK1_PIN01 (1 << 1)
+#define PINCTRL_PULL1_BANK1_PIN00 (1 << 0)
+
+#define PINCTRL_PULL2_BANK2_PIN27 (1 << 27)
+#define PINCTRL_PULL2_BANK2_PIN26 (1 << 26)
+#define PINCTRL_PULL2_BANK2_PIN25 (1 << 25)
+#define PINCTRL_PULL2_BANK2_PIN24 (1 << 24)
+#define PINCTRL_PULL2_BANK2_PIN21 (1 << 21)
+#define PINCTRL_PULL2_BANK2_PIN20 (1 << 20)
+#define PINCTRL_PULL2_BANK2_PIN19 (1 << 19)
+#define PINCTRL_PULL2_BANK2_PIN18 (1 << 18)
+#define PINCTRL_PULL2_BANK2_PIN17 (1 << 17)
+#define PINCTRL_PULL2_BANK2_PIN16 (1 << 16)
+#define PINCTRL_PULL2_BANK2_PIN15 (1 << 15)
+#define PINCTRL_PULL2_BANK2_PIN14 (1 << 14)
+#define PINCTRL_PULL2_BANK2_PIN13 (1 << 13)
+#define PINCTRL_PULL2_BANK2_PIN12 (1 << 12)
+#define PINCTRL_PULL2_BANK2_PIN10 (1 << 10)
+#define PINCTRL_PULL2_BANK2_PIN09 (1 << 9)
+#define PINCTRL_PULL2_BANK2_PIN08 (1 << 8)
+#define PINCTRL_PULL2_BANK2_PIN07 (1 << 7)
+#define PINCTRL_PULL2_BANK2_PIN06 (1 << 6)
+#define PINCTRL_PULL2_BANK2_PIN05 (1 << 5)
+#define PINCTRL_PULL2_BANK2_PIN04 (1 << 4)
+#define PINCTRL_PULL2_BANK2_PIN03 (1 << 3)
+#define PINCTRL_PULL2_BANK2_PIN02 (1 << 2)
+#define PINCTRL_PULL2_BANK2_PIN01 (1 << 1)
+#define PINCTRL_PULL2_BANK2_PIN00 (1 << 0)
+
+#define PINCTRL_PULL3_BANK3_PIN30 (1 << 30)
+#define PINCTRL_PULL3_BANK3_PIN29 (1 << 29)
+#define PINCTRL_PULL3_BANK3_PIN28 (1 << 28)
+#define PINCTRL_PULL3_BANK3_PIN27 (1 << 27)
+#define PINCTRL_PULL3_BANK3_PIN26 (1 << 26)
+#define PINCTRL_PULL3_BANK3_PIN25 (1 << 25)
+#define PINCTRL_PULL3_BANK3_PIN24 (1 << 24)
+#define PINCTRL_PULL3_BANK3_PIN23 (1 << 23)
+#define PINCTRL_PULL3_BANK3_PIN22 (1 << 22)
+#define PINCTRL_PULL3_BANK3_PIN21 (1 << 21)
+#define PINCTRL_PULL3_BANK3_PIN20 (1 << 20)
+#define PINCTRL_PULL3_BANK3_PIN18 (1 << 18)
+#define PINCTRL_PULL3_BANK3_PIN17 (1 << 17)
+#define PINCTRL_PULL3_BANK3_PIN16 (1 << 16)
+#define PINCTRL_PULL3_BANK3_PIN15 (1 << 15)
+#define PINCTRL_PULL3_BANK3_PIN14 (1 << 14)
+#define PINCTRL_PULL3_BANK3_PIN13 (1 << 13)
+#define PINCTRL_PULL3_BANK3_PIN12 (1 << 12)
+#define PINCTRL_PULL3_BANK3_PIN11 (1 << 11)
+#define PINCTRL_PULL3_BANK3_PIN10 (1 << 10)
+#define PINCTRL_PULL3_BANK3_PIN09 (1 << 9)
+#define PINCTRL_PULL3_BANK3_PIN08 (1 << 8)
+#define PINCTRL_PULL3_BANK3_PIN07 (1 << 7)
+#define PINCTRL_PULL3_BANK3_PIN06 (1 << 6)
+#define PINCTRL_PULL3_BANK3_PIN05 (1 << 5)
+#define PINCTRL_PULL3_BANK3_PIN04 (1 << 4)
+#define PINCTRL_PULL3_BANK3_PIN03 (1 << 3)
+#define PINCTRL_PULL3_BANK3_PIN02 (1 << 2)
+#define PINCTRL_PULL3_BANK3_PIN01 (1 << 1)
+#define PINCTRL_PULL3_BANK3_PIN00 (1 << 0)
+
+#define PINCTRL_PULL4_BANK4_PIN20 (1 << 20)
+#define PINCTRL_PULL4_BANK4_PIN16 (1 << 16)
+#define PINCTRL_PULL4_BANK4_PIN15 (1 << 15)
+#define PINCTRL_PULL4_BANK4_PIN14 (1 << 14)
+#define PINCTRL_PULL4_BANK4_PIN13 (1 << 13)
+#define PINCTRL_PULL4_BANK4_PIN12 (1 << 12)
+#define PINCTRL_PULL4_BANK4_PIN11 (1 << 11)
+#define PINCTRL_PULL4_BANK4_PIN10 (1 << 10)
+#define PINCTRL_PULL4_BANK4_PIN09 (1 << 9)
+#define PINCTRL_PULL4_BANK4_PIN08 (1 << 8)
+#define PINCTRL_PULL4_BANK4_PIN07 (1 << 7)
+#define PINCTRL_PULL4_BANK4_PIN06 (1 << 6)
+#define PINCTRL_PULL4_BANK4_PIN05 (1 << 5)
+#define PINCTRL_PULL4_BANK4_PIN04 (1 << 4)
+#define PINCTRL_PULL4_BANK4_PIN03 (1 << 3)
+#define PINCTRL_PULL4_BANK4_PIN02 (1 << 2)
+#define PINCTRL_PULL4_BANK4_PIN01 (1 << 1)
+#define PINCTRL_PULL4_BANK4_PIN00 (1 << 0)
+
+#define PINCTRL_PULL5_BANK5_PIN26 (1 << 26)
+#define PINCTRL_PULL5_BANK5_PIN23 (1 << 23)
+#define PINCTRL_PULL5_BANK5_PIN22 (1 << 22)
+#define PINCTRL_PULL5_BANK5_PIN21 (1 << 21)
+#define PINCTRL_PULL5_BANK5_PIN20 (1 << 20)
+#define PINCTRL_PULL5_BANK5_PIN19 (1 << 19)
+#define PINCTRL_PULL5_BANK5_PIN18 (1 << 18)
+#define PINCTRL_PULL5_BANK5_PIN17 (1 << 17)
+#define PINCTRL_PULL5_BANK5_PIN16 (1 << 16)
+#define PINCTRL_PULL5_BANK5_PIN15 (1 << 15)
+#define PINCTRL_PULL5_BANK5_PIN14 (1 << 14)
+#define PINCTRL_PULL5_BANK5_PIN13 (1 << 13)
+#define PINCTRL_PULL5_BANK5_PIN12 (1 << 12)
+#define PINCTRL_PULL5_BANK5_PIN11 (1 << 11)
+#define PINCTRL_PULL5_BANK5_PIN10 (1 << 10)
+#define PINCTRL_PULL5_BANK5_PIN09 (1 << 9)
+#define PINCTRL_PULL5_BANK5_PIN08 (1 << 8)
+#define PINCTRL_PULL5_BANK5_PIN07 (1 << 7)
+#define PINCTRL_PULL5_BANK5_PIN06 (1 << 6)
+#define PINCTRL_PULL5_BANK5_PIN05 (1 << 5)
+#define PINCTRL_PULL5_BANK5_PIN04 (1 << 4)
+#define PINCTRL_PULL5_BANK5_PIN03 (1 << 3)
+#define PINCTRL_PULL5_BANK5_PIN02 (1 << 2)
+#define PINCTRL_PULL5_BANK5_PIN01 (1 << 1)
+#define PINCTRL_PULL5_BANK5_PIN00 (1 << 0)
+
+#define PINCTRL_PULL6_BANK6_PIN24 (1 << 24)
+#define PINCTRL_PULL6_BANK6_PIN23 (1 << 23)
+#define PINCTRL_PULL6_BANK6_PIN22 (1 << 22)
+#define PINCTRL_PULL6_BANK6_PIN21 (1 << 21)
+#define PINCTRL_PULL6_BANK6_PIN20 (1 << 20)
+#define PINCTRL_PULL6_BANK6_PIN19 (1 << 19)
+#define PINCTRL_PULL6_BANK6_PIN18 (1 << 18)
+#define PINCTRL_PULL6_BANK6_PIN17 (1 << 17)
+#define PINCTRL_PULL6_BANK6_PIN16 (1 << 16)
+#define PINCTRL_PULL6_BANK6_PIN14 (1 << 14)
+#define PINCTRL_PULL6_BANK6_PIN13 (1 << 13)
+#define PINCTRL_PULL6_BANK6_PIN12 (1 << 12)
+#define PINCTRL_PULL6_BANK6_PIN11 (1 << 11)
+#define PINCTRL_PULL6_BANK6_PIN10 (1 << 10)
+#define PINCTRL_PULL6_BANK6_PIN09 (1 << 9)
+#define PINCTRL_PULL6_BANK6_PIN08 (1 << 8)
+#define PINCTRL_PULL6_BANK6_PIN07 (1 << 7)
+#define PINCTRL_PULL6_BANK6_PIN06 (1 << 6)
+#define PINCTRL_PULL6_BANK6_PIN05 (1 << 5)
+#define PINCTRL_PULL6_BANK6_PIN04 (1 << 4)
+#define PINCTRL_PULL6_BANK6_PIN03 (1 << 3)
+#define PINCTRL_PULL6_BANK6_PIN02 (1 << 2)
+#define PINCTRL_PULL6_BANK6_PIN01 (1 << 1)
+#define PINCTRL_PULL6_BANK6_PIN00 (1 << 0)
+
+#define PINCTRL_DOUT0_DOUT_MASK 0x1fffffff
+#define PINCTRL_DOUT0_DOUT_OFFSET 0
+
+#define PINCTRL_DOUT1_DOUT_MASK 0xffffffff
+#define PINCTRL_DOUT1_DOUT_OFFSET 0
+
+#define PINCTRL_DOUT2_DOUT_MASK 0xfffffff
+#define PINCTRL_DOUT2_DOUT_OFFSET 0
+
+#define PINCTRL_DOUT3_DOUT_MASK 0x7fffffff
+#define PINCTRL_DOUT3_DOUT_OFFSET 0
+
+#define PINCTRL_DOUT4_DOUT_MASK 0x1fffff
+#define PINCTRL_DOUT4_DOUT_OFFSET 0
+
+#define PINCTRL_DIN0_DIN_MASK 0x1fffffff
+#define PINCTRL_DIN0_DIN_OFFSET 0
+
+#define PINCTRL_DIN1_DIN_MASK 0xffffffff
+#define PINCTRL_DIN1_DIN_OFFSET 0
+
+#define PINCTRL_DIN2_DIN_MASK 0xfffffff
+#define PINCTRL_DIN2_DIN_OFFSET 0
+
+#define PINCTRL_DIN3_DIN_MASK 0x7fffffff
+#define PINCTRL_DIN3_DIN_OFFSET 0
+
+#define PINCTRL_DIN4_DIN_MASK 0x1fffff
+#define PINCTRL_DIN4_DIN_OFFSET 0
+
+#define PINCTRL_DOE0_DOE_MASK 0x1fffffff
+#define PINCTRL_DOE0_DOE_OFFSET 0
+
+#define PINCTRL_DOE1_DOE_MASK 0xffffffff
+#define PINCTRL_DOE1_DOE_OFFSET 0
+
+#define PINCTRL_DOE2_DOE_MASK 0xfffffff
+#define PINCTRL_DOE2_DOE_OFFSET 0
+
+#define PINCTRL_DOE3_DOE_MASK 0x7fffffff
+#define PINCTRL_DOE3_DOE_OFFSET 0
+
+#define PINCTRL_DOE4_DOE_MASK 0x1fffff
+#define PINCTRL_DOE4_DOE_OFFSET 0
+
+#define PINCTRL_PIN2IRQ0_PIN2IRQ_MASK 0x1fffffff
+#define PINCTRL_PIN2IRQ0_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_PIN2IRQ1_PIN2IRQ_MASK 0xffffffff
+#define PINCTRL_PIN2IRQ1_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_PIN2IRQ2_PIN2IRQ_MASK 0xfffffff
+#define PINCTRL_PIN2IRQ2_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_PIN2IRQ3_PIN2IRQ_MASK 0x7fffffff
+#define PINCTRL_PIN2IRQ3_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_PIN2IRQ4_PIN2IRQ_MASK 0x1fffff
+#define PINCTRL_PIN2IRQ4_PIN2IRQ_OFFSET 0
+
+#define PINCTRL_IRQEN0_IRQEN_MASK 0x1fffffff
+#define PINCTRL_IRQEN0_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQEN1_IRQEN_MASK 0xffffffff
+#define PINCTRL_IRQEN1_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQEN2_IRQEN_MASK 0xfffffff
+#define PINCTRL_IRQEN2_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQEN3_IRQEN_MASK 0x7fffffff
+#define PINCTRL_IRQEN3_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQEN4_IRQEN_MASK 0x1fffff
+#define PINCTRL_IRQEN4_IRQEN_OFFSET 0
+
+#define PINCTRL_IRQLEVEL0_IRQLEVEL_MASK 0x1fffffff
+#define PINCTRL_IRQLEVEL0_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQLEVEL1_IRQLEVEL_MASK 0xffffffff
+#define PINCTRL_IRQLEVEL1_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQLEVEL2_IRQLEVEL_MASK 0xfffffff
+#define PINCTRL_IRQLEVEL2_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQLEVEL3_IRQLEVEL_MASK 0x7fffffff
+#define PINCTRL_IRQLEVEL3_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQLEVEL4_IRQLEVEL_MASK 0x1fffff
+#define PINCTRL_IRQLEVEL4_IRQLEVEL_OFFSET 0
+
+#define PINCTRL_IRQPOL0_IRQPOL_MASK 0x1fffffff
+#define PINCTRL_IRQPOL0_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQPOL1_IRQPOL_MASK 0xffffffff
+#define PINCTRL_IRQPOL1_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQPOL2_IRQPOL_MASK 0xfffffff
+#define PINCTRL_IRQPOL2_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQPOL3_IRQPOL_MASK 0x7fffffff
+#define PINCTRL_IRQPOL3_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQPOL4_IRQPOL_MASK 0x1fffff
+#define PINCTRL_IRQPOL4_IRQPOL_OFFSET 0
+
+#define PINCTRL_IRQSTAT0_IRQSTAT_MASK 0x1fffffff
+#define PINCTRL_IRQSTAT0_IRQSTAT_OFFSET 0
+
+#define PINCTRL_IRQSTAT1_IRQSTAT_MASK 0xffffffff
+#define PINCTRL_IRQSTAT1_IRQSTAT_OFFSET 0
+
+#define PINCTRL_IRQSTAT2_IRQSTAT_MASK 0xfffffff
+#define PINCTRL_IRQSTAT2_IRQSTAT_OFFSET 0
+
+#define PINCTRL_IRQSTAT3_IRQSTAT_MASK 0x7fffffff
+#define PINCTRL_IRQSTAT3_IRQSTAT_OFFSET 0
+
+#define PINCTRL_IRQSTAT4_IRQSTAT_MASK 0x1fffff
+#define PINCTRL_IRQSTAT4_IRQSTAT_OFFSET 0
+
+#define PINCTRL_EMI_ODT_CTRL_ADDRESS_CALIB_MASK (0x3 << 26)
+#define PINCTRL_EMI_ODT_CTRL_ADDRESS_CALIB_OFFSET 26
+#define PINCTRL_EMI_ODT_CTRL_ADDRESS_TLOAD_MASK (0x3 << 24)
+#define PINCTRL_EMI_ODT_CTRL_ADDRESS_TLOAD_OFFSET 24
+#define PINCTRL_EMI_ODT_CTRL_CONTROL_CALIB_MASK (0x3 << 22)
+#define PINCTRL_EMI_ODT_CTRL_CONTROL_CALIB_OFFSET 22
+#define PINCTRL_EMI_ODT_CTRL_CONTROL_TLOAD_MASK (0x3 << 20)
+#define PINCTRL_EMI_ODT_CTRL_CONTROL_TLOAD_OFFSET 20
+#define PINCTRL_EMI_ODT_CTRL_DUALPAD_CALIB_MASK (0x3 << 18)
+#define PINCTRL_EMI_ODT_CTRL_DUALPAD_CALIB_OFFSET 18
+#define PINCTRL_EMI_ODT_CTRL_DUALPAD_TLOAD_MASK (0x3 << 16)
+#define PINCTRL_EMI_ODT_CTRL_DUALPAD_TLOAD_OFFSET 16
+#define PINCTRL_EMI_ODT_CTRL_SLICE3_CALIB_MASK (0x3 << 14)
+#define PINCTRL_EMI_ODT_CTRL_SLICE3_CALIB_OFFSET 14
+#define PINCTRL_EMI_ODT_CTRL_SLICE3_TLOAD_MASK (0x3 << 12)
+#define PINCTRL_EMI_ODT_CTRL_SLICE3_TLOAD_OFFSET 12
+#define PINCTRL_EMI_ODT_CTRL_SLICE2_CALIB_MASK (0x3 << 10)
+#define PINCTRL_EMI_ODT_CTRL_SLICE2_CALIB_OFFSET 10
+#define PINCTRL_EMI_ODT_CTRL_SLICE2_TLOAD_MASK (0x3 << 8)
+#define PINCTRL_EMI_ODT_CTRL_SLICE2_TLOAD_OFFSET 8
+#define PINCTRL_EMI_ODT_CTRL_SLICE1_CALIB_MASK (0x3 << 6)
+#define PINCTRL_EMI_ODT_CTRL_SLICE1_CALIB_OFFSET 6
+#define PINCTRL_EMI_ODT_CTRL_SLICE1_TLOAD_MASK (0x3 << 4)
+#define PINCTRL_EMI_ODT_CTRL_SLICE1_TLOAD_OFFSET 4
+#define PINCTRL_EMI_ODT_CTRL_SLICE0_CALIB_MASK (0x3 << 2)
+#define PINCTRL_EMI_ODT_CTRL_SLICE0_CALIB_OFFSET 2
+#define PINCTRL_EMI_ODT_CTRL_SLICE0_TLOAD_MASK (0x3 << 0)
+#define PINCTRL_EMI_ODT_CTRL_SLICE0_TLOAD_OFFSET 0
+
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_MASK (0x3 << 16)
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_OFFSET 16
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_mDDR (0x0 << 16)
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_GPIO (0x1 << 16)
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_LVDDR2 (0x2 << 16)
+#define PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2 (0x3 << 16)
+#define PINCTRL_EMI_DS_CTRL_ADDRESS_MA_MASK (0x3 << 12)
+#define PINCTRL_EMI_DS_CTRL_ADDRESS_MA_OFFSET 12
+#define PINCTRL_EMI_DS_CTRL_CONTROL_MA_MASK (0x3 << 10)
+#define PINCTRL_EMI_DS_CTRL_CONTROL_MA_OFFSET 10
+#define PINCTRL_EMI_DS_CTRL_DUALPAD_MA_MASK (0x3 << 8)
+#define PINCTRL_EMI_DS_CTRL_DUALPAD_MA_OFFSET 8
+#define PINCTRL_EMI_DS_CTRL_SLICE3_MA_MASK (0x3 << 6)
+#define PINCTRL_EMI_DS_CTRL_SLICE3_MA_OFFSET 6
+#define PINCTRL_EMI_DS_CTRL_SLICE2_MA_MASK (0x3 << 4)
+#define PINCTRL_EMI_DS_CTRL_SLICE2_MA_OFFSET 4
+#define PINCTRL_EMI_DS_CTRL_SLICE1_MA_MASK (0x3 << 2)
+#define PINCTRL_EMI_DS_CTRL_SLICE1_MA_OFFSET 2
+#define PINCTRL_EMI_DS_CTRL_SLICE0_MA_MASK (0x3 << 0)
+#define PINCTRL_EMI_DS_CTRL_SLICE0_MA_OFFSET 0
+
+#endif /* __MX28_REGS_PINCTRL_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-power.h b/arch/arm/include/asm/arch-mx28/regs-power.h
new file mode 100644
index 0000000..9da63ad
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-power.h
@@ -0,0 +1,413 @@
+/*
+ * Freescale i.MX28 Power Controller Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_POWER_H__
+#define __MX28_REGS_POWER_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_power_regs {
+ mx28_reg(hw_power_ctrl)
+ mx28_reg(hw_power_5vctrl)
+ mx28_reg(hw_power_minpwr)
+ mx28_reg(hw_power_charge)
+ uint32_t hw_power_vdddctrl;
+ uint32_t reserved_vddd[3];
+ uint32_t hw_power_vddactrl;
+ uint32_t reserved_vdda[3];
+ uint32_t hw_power_vddioctrl;
+ uint32_t reserved_vddio[3];
+ uint32_t hw_power_vddmemctrl;
+ uint32_t reserved_vddmem[3];
+ uint32_t hw_power_dcdc4p2;
+ uint32_t reserved_dcdc4p2[3];
+ uint32_t hw_power_misc;
+ uint32_t reserved_misc[3];
+ uint32_t hw_power_dclimits;
+ uint32_t reserved_dclimits[3];
+ mx28_reg(hw_power_loopctrl)
+ uint32_t hw_power_sts;
+ uint32_t reserved_sts[3];
+ mx28_reg(hw_power_speed)
+ uint32_t hw_power_battmonitor;
+ uint32_t reserved_battmonitor[3];
+
+ uint32_t reserved[4];
+
+ mx28_reg(hw_power_reset)
+ mx28_reg(hw_power_debug)
+ mx28_reg(hw_power_thermal)
+ mx28_reg(hw_power_usb1ctrl)
+ mx28_reg(hw_power_special)
+ mx28_reg(hw_power_version)
+ mx28_reg(hw_power_anaclkctrl)
+ mx28_reg(hw_power_refctrl)
+};
+#endif
+
+#define POWER_CTRL_PSWITCH_MID_TRAN (1 << 27)
+#define POWER_CTRL_DCDC4P2_BO_IRQ (1 << 24)
+#define POWER_CTRL_ENIRQ_DCDC4P2_BO (1 << 23)
+#define POWER_CTRL_VDD5V_DROOP_IRQ (1 << 22)
+#define POWER_CTRL_ENIRQ_VDD5V_DROOP (1 << 21)
+#define POWER_CTRL_PSWITCH_IRQ (1 << 20)
+#define POWER_CTRL_PSWITCH_IRQ_SRC (1 << 19)
+#define POWER_CTRL_POLARITY_PSWITCH (1 << 18)
+#define POWER_CTRL_ENIRQ_PSWITCH (1 << 17)
+#define POWER_CTRL_POLARITY_DC_OK (1 << 16)
+#define POWER_CTRL_DC_OK_IRQ (1 << 15)
+#define POWER_CTRL_ENIRQ_DC_OK (1 << 14)
+#define POWER_CTRL_BATT_BO_IRQ (1 << 13)
+#define POWER_CTRL_ENIRQ_BATT_BO (1 << 12)
+#define POWER_CTRL_VDDIO_BO_IRQ (1 << 11)
+#define POWER_CTRL_ENIRQ_VDDIO_BO (1 << 10)
+#define POWER_CTRL_VDDA_BO_IRQ (1 << 9)
+#define POWER_CTRL_ENIRQ_VDDA_BO (1 << 8)
+#define POWER_CTRL_VDDD_BO_IRQ (1 << 7)
+#define POWER_CTRL_ENIRQ_VDDD_BO (1 << 6)
+#define POWER_CTRL_POLARITY_VBUSVALID (1 << 5)
+#define POWER_CTRL_VBUS_VALID_IRQ (1 << 4)
+#define POWER_CTRL_ENIRQ_VBUS_VALID (1 << 3)
+#define POWER_CTRL_POLARITY_VDD5V_GT_VDDIO (1 << 2)
+#define POWER_CTRL_VDD5V_GT_VDDIO_IRQ (1 << 1)
+#define POWER_CTRL_ENIRQ_VDD5V_GT_VDDIO (1 << 0)
+
+#define POWER_5VCTRL_VBUSDROOP_TRSH_MASK (0x3 << 30)
+#define POWER_5VCTRL_VBUSDROOP_TRSH_OFFSET 30
+#define POWER_5VCTRL_VBUSDROOP_TRSH_4V3 (0x0 << 30)
+#define POWER_5VCTRL_VBUSDROOP_TRSH_4V4 (0x1 << 30)
+#define POWER_5VCTRL_VBUSDROOP_TRSH_4V5 (0x2 << 30)
+#define POWER_5VCTRL_VBUSDROOP_TRSH_4V7 (0x3 << 30)
+#define POWER_5VCTRL_HEADROOM_ADJ_MASK (0x7 << 24)
+#define POWER_5VCTRL_HEADROOM_ADJ_OFFSET 24
+#define POWER_5VCTRL_PWD_CHARGE_4P2_MASK (0x3 << 20)
+#define POWER_5VCTRL_PWD_CHARGE_4P2_OFFSET 20
+#define POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK (0x3f << 12)
+#define POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET 12
+#define POWER_5VCTRL_VBUSVALID_TRSH_MASK (0x7 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_OFFSET 8
+#define POWER_5VCTRL_VBUSVALID_TRSH_2V9 (0x0 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V0 (0x1 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V1 (0x2 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V2 (0x3 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V3 (0x4 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V4 (0x5 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V5 (0x6 << 8)
+#define POWER_5VCTRL_VBUSVALID_TRSH_4V6 (0x7 << 8)
+#define POWER_5VCTRL_PWDN_5VBRNOUT (1 << 7)
+#define POWER_5VCTRL_ENABLE_LINREG_ILIMIT (1 << 6)
+#define POWER_5VCTRL_DCDC_XFER (1 << 5)
+#define POWER_5VCTRL_VBUSVALID_5VDETECT (1 << 4)
+#define POWER_5VCTRL_VBUSVALID_TO_B (1 << 3)
+#define POWER_5VCTRL_ILIMIT_EQ_ZERO (1 << 2)
+#define POWER_5VCTRL_PWRUP_VBUS_CMPS (1 << 1)
+#define POWER_5VCTRL_ENABLE_DCDC (1 << 0)
+
+#define POWER_MINPWR_LOWPWR_4P2 (1 << 14)
+#define POWER_MINPWR_PWD_BO (1 << 12)
+#define POWER_MINPWR_USE_VDDXTAL_VBG (1 << 11)
+#define POWER_MINPWR_PWD_ANA_CMPS (1 << 10)
+#define POWER_MINPWR_ENABLE_OSC (1 << 9)
+#define POWER_MINPWR_SELECT_OSC (1 << 8)
+#define POWER_MINPWR_FBG_OFF (1 << 7)
+#define POWER_MINPWR_DOUBLE_FETS (1 << 6)
+#define POWER_MINPWR_HALFFETS (1 << 5)
+#define POWER_MINPWR_LESSANA_I (1 << 4)
+#define POWER_MINPWR_PWD_XTAL24 (1 << 3)
+#define POWER_MINPWR_DC_STOPCLK (1 << 2)
+#define POWER_MINPWR_EN_DC_PFM (1 << 1)
+#define POWER_MINPWR_DC_HALFCLK (1 << 0)
+
+#define POWER_CHARGE_ADJ_VOLT_MASK (0x7 << 24)
+#define POWER_CHARGE_ADJ_VOLT_OFFSET 24
+#define POWER_CHARGE_ADJ_VOLT_M025P (0x1 << 24)
+#define POWER_CHARGE_ADJ_VOLT_P050P (0x2 << 24)
+#define POWER_CHARGE_ADJ_VOLT_M075P (0x3 << 24)
+#define POWER_CHARGE_ADJ_VOLT_P025P (0x4 << 24)
+#define POWER_CHARGE_ADJ_VOLT_M050P (0x5 << 24)
+#define POWER_CHARGE_ADJ_VOLT_P075P (0x6 << 24)
+#define POWER_CHARGE_ADJ_VOLT_M100P (0x7 << 24)
+#define POWER_CHARGE_ENABLE_LOAD (1 << 22)
+#define POWER_CHARGE_ENABLE_FAULT_DETECT (1 << 20)
+#define POWER_CHARGE_CHRG_STS_OFF (1 << 19)
+#define POWER_CHARGE_LIION_4P1 (1 << 18)
+#define POWER_CHARGE_PWD_BATTCHRG (1 << 16)
+#define POWER_CHARGE_ENABLE_CHARGER_USB1 (1 << 13)
+#define POWER_CHARGE_ENABLE_CHARGER_USB0 (1 << 12)
+#define POWER_CHARGE_STOP_ILIMIT_MASK (0xf << 8)
+#define POWER_CHARGE_STOP_ILIMIT_OFFSET 8
+#define POWER_CHARGE_STOP_ILIMIT_10MA (0x1 << 8)
+#define POWER_CHARGE_STOP_ILIMIT_20MA (0x2 << 8)
+#define POWER_CHARGE_STOP_ILIMIT_50MA (0x4 << 8)
+#define POWER_CHARGE_STOP_ILIMIT_100MA (0x8 << 8)
+#define POWER_CHARGE_BATTCHRG_I_MASK 0x3f
+#define POWER_CHARGE_BATTCHRG_I_OFFSET 0
+#define POWER_CHARGE_BATTCHRG_I_10MA 0x01
+#define POWER_CHARGE_BATTCHRG_I_20MA 0x02
+#define POWER_CHARGE_BATTCHRG_I_50MA 0x04
+#define POWER_CHARGE_BATTCHRG_I_100MA 0x08
+#define POWER_CHARGE_BATTCHRG_I_200MA 0x10
+#define POWER_CHARGE_BATTCHRG_I_400MA 0x20
+
+#define POWER_VDDDCTRL_ADJTN_MASK (0xf << 28)
+#define POWER_VDDDCTRL_ADJTN_OFFSET 28
+#define POWER_VDDDCTRL_PWDN_BRNOUT (1 << 23)
+#define POWER_VDDDCTRL_DISABLE_STEPPING (1 << 22)
+#define POWER_VDDDCTRL_ENABLE_LINREG (1 << 21)
+#define POWER_VDDDCTRL_DISABLE_FET (1 << 20)
+#define POWER_VDDDCTRL_LINREG_OFFSET_MASK (0x3 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_OFFSET 16
+#define POWER_VDDDCTRL_LINREG_OFFSET_0STEPS (0x0 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 16)
+#define POWER_VDDDCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 16)
+#define POWER_VDDDCTRL_BO_OFFSET_MASK (0x7 << 8)
+#define POWER_VDDDCTRL_BO_OFFSET_OFFSET 8
+#define POWER_VDDDCTRL_TRG_MASK 0x1f
+#define POWER_VDDDCTRL_TRG_OFFSET 0
+
+#define POWER_VDDACTRL_PWDN_BRNOUT (1 << 19)
+#define POWER_VDDACTRL_DISABLE_STEPPING (1 << 18)
+#define POWER_VDDACTRL_ENABLE_LINREG (1 << 17)
+#define POWER_VDDACTRL_DISABLE_FET (1 << 16)
+#define POWER_VDDACTRL_LINREG_OFFSET_MASK (0x3 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_OFFSET 12
+#define POWER_VDDACTRL_LINREG_OFFSET_0STEPS (0x0 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12)
+#define POWER_VDDACTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12)
+#define POWER_VDDACTRL_BO_OFFSET_MASK (0x7 << 8)
+#define POWER_VDDACTRL_BO_OFFSET_OFFSET 8
+#define POWER_VDDACTRL_TRG_MASK 0x1f
+#define POWER_VDDACTRL_TRG_OFFSET 0
+
+#define POWER_VDDIOCTRL_ADJTN_MASK (0xf << 20)
+#define POWER_VDDIOCTRL_ADJTN_OFFSET 20
+#define POWER_VDDIOCTRL_PWDN_BRNOUT (1 << 18)
+#define POWER_VDDIOCTRL_DISABLE_STEPPING (1 << 17)
+#define POWER_VDDIOCTRL_DISABLE_FET (1 << 16)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_MASK (0x3 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_OFFSET 12
+#define POWER_VDDIOCTRL_LINREG_OFFSET_0STEPS (0x0 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_ABOVE (0x1 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW (0x2 << 12)
+#define POWER_VDDIOCTRL_LINREG_OFFSET_2STEPS_BELOW (0x3 << 12)
+#define POWER_VDDIOCTRL_BO_OFFSET_MASK (0x7 << 8)
+#define POWER_VDDIOCTRL_BO_OFFSET_OFFSET 8
+#define POWER_VDDIOCTRL_TRG_MASK 0x1f
+#define POWER_VDDIOCTRL_TRG_OFFSET 0
+
+#define POWER_VDDMEMCTRL_PULLDOWN_ACTIVE (1 << 10)
+#define POWER_VDDMEMCTRL_ENABLE_ILIMIT (1 << 9)
+#define POWER_VDDMEMCTRL_ENABLE_LINREG (1 << 8)
+#define POWER_VDDMEMCTRL_BO_OFFSET_MASK (0x7 << 5)
+#define POWER_VDDMEMCTRL_BO_OFFSET_OFFSET 5
+#define POWER_VDDMEMCTRL_TRG_MASK 0x1f
+#define POWER_VDDMEMCTRL_TRG_OFFSET 0
+
+#define POWER_DCDC4P2_DROPOUT_CTRL_MASK (0xf << 28)
+#define POWER_DCDC4P2_DROPOUT_CTRL_OFFSET 28
+#define POWER_DCDC4P2_DROPOUT_CTRL_200MV (0x3 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_100MV (0x2 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_50MV (0x1 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_25MV (0x0 << 30)
+#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2 (0x0 << 28)
+#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_4P2_LT_BATT (0x1 << 28)
+#define POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL (0x2 << 28)
+#define POWER_DCDC4P2_ISTEAL_THRESH_MASK (0x3 << 24)
+#define POWER_DCDC4P2_ISTEAL_THRESH_OFFSET 24
+#define POWER_DCDC4P2_ENABLE_4P2 (1 << 23)
+#define POWER_DCDC4P2_ENABLE_DCDC (1 << 22)
+#define POWER_DCDC4P2_HYST_DIR (1 << 21)
+#define POWER_DCDC4P2_HYST_THRESH (1 << 20)
+#define POWER_DCDC4P2_TRG_MASK (0x7 << 16)
+#define POWER_DCDC4P2_TRG_OFFSET 16
+#define POWER_DCDC4P2_TRG_4V2 (0x0 << 16)
+#define POWER_DCDC4P2_TRG_4V1 (0x1 << 16)
+#define POWER_DCDC4P2_TRG_4V0 (0x2 << 16)
+#define POWER_DCDC4P2_TRG_3V9 (0x3 << 16)
+#define POWER_DCDC4P2_TRG_BATT (0x4 << 16)
+#define POWER_DCDC4P2_BO_MASK (0x1f << 8)
+#define POWER_DCDC4P2_BO_OFFSET 8
+#define POWER_DCDC4P2_CMPTRIP_MASK 0x1f
+#define POWER_DCDC4P2_CMPTRIP_OFFSET 0
+
+#define POWER_MISC_FREQSEL_MASK (0x7 << 4)
+#define POWER_MISC_FREQSEL_OFFSET 4
+#define POWER_MISC_FREQSEL_20MHZ (0x1 << 4)
+#define POWER_MISC_FREQSEL_24MHZ (0x2 << 4)
+#define POWER_MISC_FREQSEL_19MHZ (0x3 << 4)
+#define POWER_MISC_FREQSEL_14MHZ (0x4 << 4)
+#define POWER_MISC_FREQSEL_18MHZ (0x5 << 4)
+#define POWER_MISC_FREQSEL_21MHZ (0x6 << 4)
+#define POWER_MISC_FREQSEL_17MHZ (0x7 << 4)
+#define POWER_MISC_DISABLE_FET_BO_LOGIC (1 << 3)
+#define POWER_MISC_DELAY_TIMING (1 << 2)
+#define POWER_MISC_TEST (1 << 1)
+#define POWER_MISC_SEL_PLLCLK (1 << 0)
+
+#define POWER_DCLIMITS_POSLIMIT_BUCK_MASK (0x7f << 8)
+#define POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET 8
+#define POWER_DCLIMITS_NEGLIMIT_MASK 0x7f
+#define POWER_DCLIMITS_NETLIMIT_OFFSET 0
+
+#define POWER_LOOPCTRL_TOGGLE_DIF (1 << 20)
+#define POWER_LOOPCTRL_HYST_SIGN (1 << 19)
+#define POWER_LOOPCTRL_EN_CM_HYST (1 << 18)
+#define POWER_LOOPCTRL_EN_DF_HYST (1 << 17)
+#define POWER_LOOPCTRL_CM_HYST_THRESH (1 << 16)
+#define POWER_LOOPCTRL_DF_HYST_THRESH (1 << 15)
+#define POWER_LOOPCTRL_RCSCALE_THRESH (1 << 14)
+#define POWER_LOOPCTRL_EN_RCSCALE_MASK (0x3 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_OFFSET 12
+#define POWER_LOOPCTRL_EN_RCSCALE_DIS (0x0 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_2X (0x1 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_4X (0x2 << 12)
+#define POWER_LOOPCTRL_EN_RCSCALE_8X (0x3 << 12)
+#define POWER_LOOPCTRL_DC_FF_MASK (0x7 << 8)
+#define POWER_LOOPCTRL_DC_FF_OFFSET 8
+#define POWER_LOOPCTRL_DC_R_MASK (0xf << 4)
+#define POWER_LOOPCTRL_DC_R_OFFSET 4
+#define POWER_LOOPCTRL_DC_C_MASK 0x3
+#define POWER_LOOPCTRL_DC_C_OFFSET 0
+#define POWER_LOOPCTRL_DC_C_MAX 0x0
+#define POWER_LOOPCTRL_DC_C_2X 0x1
+#define POWER_LOOPCTRL_DC_C_4X 0x2
+#define POWER_LOOPCTRL_DC_C_MIN 0x3
+
+#define POWER_STS_PWRUP_SOURCE_MASK (0x3f << 24)
+#define POWER_STS_PWRUP_SOURCE_OFFSET 24
+#define POWER_STS_PWRUP_SOURCE_5V (0x20 << 24)
+#define POWER_STS_PWRUP_SOURCE_RTC (0x10 << 24)
+#define POWER_STS_PWRUP_SOURCE_PSWITCH_HIGH (0x02 << 24)
+#define POWER_STS_PWRUP_SOURCE_PSWITCH_MID (0x01 << 24)
+#define POWER_STS_PSWITCH_MASK (0x3 << 20)
+#define POWER_STS_PSWITCH_OFFSET 20
+#define POWER_STS_THERMAL_WARNING (1 << 19)
+#define POWER_STS_VDDMEM_BO (1 << 18)
+#define POWER_STS_AVALID0_STATUS (1 << 17)
+#define POWER_STS_BVALID0_STATUS (1 << 16)
+#define POWER_STS_VBUSVALID0_STATUS (1 << 15)
+#define POWER_STS_SESSEND0_STATUS (1 << 14)
+#define POWER_STS_BATT_BO (1 << 13)
+#define POWER_STS_VDD5V_FAULT (1 << 12)
+#define POWER_STS_CHRGSTS (1 << 11)
+#define POWER_STS_DCDC_4P2_BO (1 << 10)
+#define POWER_STS_DC_OK (1 << 9)
+#define POWER_STS_VDDIO_BO (1 << 8)
+#define POWER_STS_VDDA_BO (1 << 7)
+#define POWER_STS_VDDD_BO (1 << 6)
+#define POWER_STS_VDD5V_GT_VDDIO (1 << 5)
+#define POWER_STS_VDD5V_DROOP (1 << 4)
+#define POWER_STS_AVALID0 (1 << 3)
+#define POWER_STS_BVALID0 (1 << 2)
+#define POWER_STS_VBUSVALID0 (1 << 1)
+#define POWER_STS_SESSEND0 (1 << 0)
+
+#define POWER_SPEED_STATUS_MASK (0xffff << 8)
+#define POWER_SPEED_STATUS_OFFSET 8
+#define POWER_SPEED_STATUS_SEL_MASK (0x3 << 6)
+#define POWER_SPEED_STATUS_SEL_OFFSET 6
+#define POWER_SPEED_STATUS_SEL_DCDC_STAT (0x0 << 6)
+#define POWER_SPEED_STATUS_SEL_CORE_STAT (0x1 << 6)
+#define POWER_SPEED_STATUS_SEL_ARM_STAT (0x2 << 6)
+#define POWER_SPEED_CTRL_MASK 0x3
+#define POWER_SPEED_CTRL_OFFSET 0
+#define POWER_SPEED_CTRL_SS_OFF 0x0
+#define POWER_SPEED_CTRL_SS_ON 0x1
+#define POWER_SPEED_CTRL_SS_ENABLE 0x3
+
+#define POWER_BATTMONITOR_BATT_VAL_MASK (0x3ff << 16)
+#define POWER_BATTMONITOR_BATT_VAL_OFFSET 16
+#define POWER_BATTMONITOR_PWDN_BATTBRNOUT_5VDETECT_EN (1 << 11)
+#define POWER_BATTMONITOR_EN_BATADJ (1 << 10)
+#define POWER_BATTMONITOR_PWDN_BATTBRNOUT (1 << 9)
+#define POWER_BATTMONITOR_BRWNOUT_PWD (1 << 8)
+#define POWER_BATTMONITOR_BRWNOUT_LVL_MASK 0x1f
+#define POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET 0
+
+#define POWER_RESET_UNLOCK_MASK (0xffff << 16)
+#define POWER_RESET_UNLOCK_OFFSET 16
+#define POWER_RESET_UNLOCK_KEY (0x3e77 << 16)
+#define POWER_RESET_FASTFALL_PSWITCH_OFF (1 << 2)
+#define POWER_RESET_PWD_OFF (1 << 1)
+#define POWER_RESET_PWD (1 << 0)
+
+#define POWER_DEBUG_VBUSVALIDPIOLOCK (1 << 3)
+#define POWER_DEBUG_AVALIDPIOLOCK (1 << 2)
+#define POWER_DEBUG_BVALIDPIOLOCK (1 << 1)
+#define POWER_DEBUG_SESSENDPIOLOCK (1 << 0)
+
+#define POWER_THERMAL_TEST (1 << 8)
+#define POWER_THERMAL_PWD (1 << 7)
+#define POWER_THERMAL_LOW_POWER (1 << 6)
+#define POWER_THERMAL_OFFSET_ADJ_MASK (0x3 << 4)
+#define POWER_THERMAL_OFFSET_ADJ_OFFSET 4
+#define POWER_THERMAL_OFFSET_ADJ_ENABLE (1 << 3)
+#define POWER_THERMAL_TEMP_THRESHOLD_MASK 0x7
+#define POWER_THERMAL_TEMP_THRESHOLD_OFFSET 0
+
+#define POWER_USB1CTRL_AVALID1 (1 << 3)
+#define POWER_USB1CTRL_BVALID1 (1 << 2)
+#define POWER_USB1CTRL_VBUSVALID1 (1 << 1)
+#define POWER_USB1CTRL_SESSEND1 (1 << 0)
+
+#define POWER_SPECIAL_TEST_MASK 0xffffffff
+#define POWER_SPECIAL_TEST_OFFSET 0
+
+#define POWER_VERSION_MAJOR_MASK (0xff << 24)
+#define POWER_VERSION_MAJOR_OFFSET 24
+#define POWER_VERSION_MINOR_MASK (0xff << 16)
+#define POWER_VERSION_MINOR_OFFSET 16
+#define POWER_VERSION_STEP_MASK 0xffff
+#define POWER_VERSION_STEP_OFFSET 0
+
+#define POWER_ANACLKCTRL_CLKGATE_0 (1 << 31)
+#define POWER_ANACLKCTRL_OUTDIV_MASK (0x7 << 28)
+#define POWER_ANACLKCTRL_OUTDIV_OFFSET 28
+#define POWER_ANACLKCTRL_INVERT_OUTCLK (1 << 27)
+#define POWER_ANACLKCTRL_CLKGATE_I (1 << 26)
+#define POWER_ANACLKCTRL_DITHER_OFF (1 << 10)
+#define POWER_ANACLKCTRL_SLOW_DITHER (1 << 9)
+#define POWER_ANACLKCTRL_INVERT_INCLK (1 << 8)
+#define POWER_ANACLKCTRL_INCLK_SHIFT_MASK (0x3 << 4)
+#define POWER_ANACLKCTRL_INCLK_SHIFT_OFFSET 4
+#define POWER_ANACLKCTRL_INDIV_MASK 0x7
+#define POWER_ANACLKCTRL_INDIV_OFFSET 0
+
+#define POWER_REFCTRL_FASTSETTLING (1 << 26)
+#define POWER_REFCTRL_RAISE_REF (1 << 25)
+#define POWER_REFCTRL_XTAL_BGR_BIAS (1 << 24)
+#define POWER_REFCTRL_VBG_ADJ_MASK (0x7 << 20)
+#define POWER_REFCTRL_VBG_ADJ_OFFSET 20
+#define POWER_REFCTRL_LOW_PWR (1 << 19)
+#define POWER_REFCTRL_BIAS_CTRL_MASK (0x3 << 16)
+#define POWER_REFCTRL_BIAS_CTRL_OFFSET 16
+#define POWER_REFCTRL_VDDXTAL_TO_VDDD (1 << 14)
+#define POWER_REFCTRL_ADJ_ANA (1 << 13)
+#define POWER_REFCTRL_ADJ_VAG (1 << 12)
+#define POWER_REFCTRL_ANA_REFVAL_MASK (0xf << 8)
+#define POWER_REFCTRL_ANA_REFVAL_OFFSET 8
+#define POWER_REFCTRL_VAG_VAL_MASK (0xf << 4)
+#define POWER_REFCTRL_VAG_VAL_OFFSET 4
+
+#endif /* __MX28_REGS_POWER_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-rtc.h b/arch/arm/include/asm/arch-mx28/regs-rtc.h
new file mode 100644
index 0000000..fe2fda9
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-rtc.h
@@ -0,0 +1,147 @@
+/*
+ * Freescale i.MX28 RTC Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_RTC_H__
+#define __MX28_REGS_RTC_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_rtc_regs {
+ mx28_reg(hw_rtc_ctrl)
+ mx28_reg(hw_rtc_stat)
+ mx28_reg(hw_rtc_milliseconds)
+ mx28_reg(hw_rtc_seconds)
+ mx28_reg(hw_rtc_rtc_alarm)
+ mx28_reg(hw_rtc_watchdog)
+ mx28_reg(hw_rtc_persistent0)
+ mx28_reg(hw_rtc_persistent1)
+ mx28_reg(hw_rtc_persistent2)
+ mx28_reg(hw_rtc_persistent3)
+ mx28_reg(hw_rtc_persistent4)
+ mx28_reg(hw_rtc_persistent5)
+ mx28_reg(hw_rtc_debug)
+ mx28_reg(hw_rtc_version)
+};
+#endif
+
+#define RTC_CTRL_SFTRST (1 << 31)
+#define RTC_CTRL_CLKGATE (1 << 30)
+#define RTC_CTRL_SUPPRESS_COPY2ANALOG (1 << 6)
+#define RTC_CTRL_FORCE_UPDATE (1 << 5)
+#define RTC_CTRL_WATCHDOGEN (1 << 4)
+#define RTC_CTRL_ONEMSEC_IRQ (1 << 3)
+#define RTC_CTRL_ALARM_IRQ (1 << 2)
+#define RTC_CTRL_ONEMSEC_IRQ_EN (1 << 1)
+#define RTC_CTRL_ALARM_IRQ_EN (1 << 0)
+
+#define RTC_STAT_RTC_PRESENT (1 << 31)
+#define RTC_STAT_ALARM_PRESENT (1 << 30)
+#define RTC_STAT_WATCHDOG_PRESENT (1 << 29)
+#define RTC_STAT_XTAL32000_PRESENT (1 << 28)
+#define RTC_STAT_XTAL32768_PRESENT (1 << 27)
+#define RTC_STAT_STALE_REGS_MASK (0xff << 16)
+#define RTC_STAT_STALE_REGS_OFFSET 16
+#define RTC_STAT_NEW_REGS_MASK (0xff << 8)
+#define RTC_STAT_NEW_REGS_OFFSET 8
+
+#define RTC_MILLISECONDS_COUNT_MASK 0xffffffff
+#define RTC_MILLISECONDS_COUNT_OFFSET 0
+
+#define RTC_SECONDS_COUNT_MASK 0xffffffff
+#define RTC_SECONDS_COUNT_OFFSET 0
+
+#define RTC_ALARM_VALUE_MASK 0xffffffff
+#define RTC_ALARM_VALUE_OFFSET 0
+
+#define RTC_WATCHDOG_COUNT_MASK 0xffffffff
+#define RTC_WATCHDOG_COUNT_OFFSET 0
+
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_MASK (0xf << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_OFFSET 28
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V83 (0x0 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V78 (0x1 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V73 (0x2 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V68 (0x3 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V62 (0x4 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V57 (0x5 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V52 (0x6 << 28)
+#define RTC_PERSISTENT0_ADJ_POSLIMITBUCK_2V48 (0x7 << 28)
+#define RTC_PERSISTENT0_EXTERNAL_RESET (1 << 21)
+#define RTC_PERSISTENT0_THERMAL_RESET (1 << 20)
+#define RTC_PERSISTENT0_ENABLE_LRADC_PWRUP (1 << 18)
+#define RTC_PERSISTENT0_AUTO_RESTART (1 << 17)
+#define RTC_PERSISTENT0_DISABLE_PSWITCH (1 << 16)
+#define RTC_PERSISTENT0_LOWERBIAS_MASK (0xf << 14)
+#define RTC_PERSISTENT0_LOWERBIAS_OFFSET 14
+#define RTC_PERSISTENT0_LOWERBIAS_NOMINAL (0x0 << 14)
+#define RTC_PERSISTENT0_LOWERBIAS_M25P (0x1 << 14)
+#define RTC_PERSISTENT0_LOWERBIAS_M50P (0x3 << 14)
+#define RTC_PERSISTENT0_DISABLE_XTALOK (1 << 13)
+#define RTC_PERSISTENT0_MSEC_RES_MASK (0x1f << 8)
+#define RTC_PERSISTENT0_MSEC_RES_OFFSET 8
+#define RTC_PERSISTENT0_MSEC_RES_1MS (0x01 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_2MS (0x02 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_4MS (0x04 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_8MS (0x08 << 8)
+#define RTC_PERSISTENT0_MSEC_RES_16MS (0x10 << 8)
+#define RTC_PERSISTENT0_ALARM_WAKE (1 << 7)
+#define RTC_PERSISTENT0_XTAL32_FREQ (1 << 6)
+#define RTC_PERSISTENT0_XTAL32KHZ_PWRUP (1 << 5)
+#define RTC_PERSISTENT0_XTAL24KHZ_PWRUP (1 << 4)
+#define RTC_PERSISTENT0_LCK_SECS (1 << 3)
+#define RTC_PERSISTENT0_ALARM_EN (1 << 2)
+#define RTC_PERSISTENT0_ALARM_WAKE_EN (1 << 1)
+#define RTC_PERSISTENT0_CLOCKSOURCE (1 << 0)
+
+#define RTC_PERSISTENT1_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT1_GENERAL_OFFSET 0
+#define RTC_PERSISTENT1_GENERAL_OTG_ALT_ROLE 0x0080
+#define RTC_PERSISTENT1_GENERAL_OTG_HNP 0x0100
+#define RTC_PERSISTENT1_GENERAL_USB_LPM 0x0200
+#define RTC_PERSISTENT1_GENERAL_SKIP_CHECKDISK 0x0400
+#define RTC_PERSISTENT1_GENERAL_USB_BOOT_PLAYER 0x0800
+#define RTC_PERSISTENT1_GENERAL_ENUM_500MA_2X 0x1000
+
+#define RTC_PERSISTENT2_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT2_GENERAL_OFFSET 0
+
+#define RTC_PERSISTENT3_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT3_GENERAL_OFFSET 0
+
+#define RTC_PERSISTENT4_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT4_GENERAL_OFFSET 0
+
+#define RTC_PERSISTENT5_GENERAL_MASK 0xffffffff
+#define RTC_PERSISTENT5_GENERAL_OFFSET 0
+
+#define RTC_DEBUG_WATCHDOG_RESET_MASK (1 << 1)
+#define RTC_DEBUG_WATCHDOG_RESET (1 << 0)
+
+#define RTC_VERSION_MAJOR_MASK (0xff << 24)
+#define RTC_VERSION_MAJOR_OFFSET 24
+#define RTC_VERSION_MINOR_MASK (0xff << 16)
+#define RTC_VERSION_MINOR_OFFSET 16
+#define RTC_VERSION_STEP_MASK 0xffff
+#define RTC_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_RTC_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-ssp.h b/arch/arm/include/asm/arch-mx28/regs-ssp.h
new file mode 100644
index 0000000..ab3870c
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-ssp.h
@@ -0,0 +1,349 @@
+/*
+ * Freescale i.MX28 SSP Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_SSP_H__
+#define __MX28_REGS_SSP_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_ssp_regs {
+ mx28_reg(hw_ssp_ctrl0)
+ mx28_reg(hw_ssp_cmd0)
+ mx28_reg(hw_ssp_cmd1)
+ mx28_reg(hw_ssp_xfer_size)
+ mx28_reg(hw_ssp_block_size)
+ mx28_reg(hw_ssp_compref)
+ mx28_reg(hw_ssp_compmask)
+ mx28_reg(hw_ssp_timing)
+ mx28_reg(hw_ssp_ctrl1)
+ mx28_reg(hw_ssp_data)
+ mx28_reg(hw_ssp_sdresp0)
+ mx28_reg(hw_ssp_sdresp1)
+ mx28_reg(hw_ssp_sdresp2)
+ mx28_reg(hw_ssp_sdresp3)
+ mx28_reg(hw_ssp_ddr_ctrl)
+ mx28_reg(hw_ssp_dll_ctrl)
+ mx28_reg(hw_ssp_status)
+ mx28_reg(hw_ssp_dll_sts)
+ mx28_reg(hw_ssp_debug)
+ mx28_reg(hw_ssp_version)
+};
+#endif
+
+#define SSP_CTRL0_SFTRST (1 << 31)
+#define SSP_CTRL0_CLKGATE (1 << 30)
+#define SSP_CTRL0_RUN (1 << 29)
+#define SSP_CTRL0_SDIO_IRQ_CHECK (1 << 28)
+#define SSP_CTRL0_LOCK_CS (1 << 27)
+#define SSP_CTRL0_IGNORE_CRC (1 << 26)
+#define SSP_CTRL0_READ (1 << 25)
+#define SSP_CTRL0_DATA_XFER (1 << 24)
+#define SSP_CTRL0_BUS_WIDTH_MASK (0x3 << 22)
+#define SSP_CTRL0_BUS_WIDTH_OFFSET 22
+#define SSP_CTRL0_BUS_WIDTH_ONE_BIT (0x0 << 22)
+#define SSP_CTRL0_BUS_WIDTH_FOUR_BIT (0x1 << 22)
+#define SSP_CTRL0_BUS_WIDTH_EIGHT_BIT (0x2 << 22)
+#define SSP_CTRL0_WAIT_FOR_IRQ (1 << 21)
+#define SSP_CTRL0_WAIT_FOR_CMD (1 << 20)
+#define SSP_CTRL0_LONG_RESP (1 << 19)
+#define SSP_CTRL0_CHECK_RESP (1 << 18)
+#define SSP_CTRL0_GET_RESP (1 << 17)
+#define SSP_CTRL0_ENABLE (1 << 16)
+
+#define SSP_CMD0_SOFT_TERMINATE (1 << 26)
+#define SSP_CMD0_DBL_DATA_RATE_EN (1 << 25)
+#define SSP_CMD0_PRIM_BOOT_OP_EN (1 << 24)
+#define SSP_CMD0_BOOT_ACK_EN (1 << 23)
+#define SSP_CMD0_SLOW_CLKING_EN (1 << 22)
+#define SSP_CMD0_CONT_CLKING_EN (1 << 21)
+#define SSP_CMD0_APPEND_8CYC (1 << 20)
+#define SSP_CMD0_CMD_MASK 0xff
+#define SSP_CMD0_CMD_OFFSET 0
+#define SSP_CMD0_CMD_MMC_GO_IDLE_STATE 0x00
+#define SSP_CMD0_CMD_MMC_SEND_OP_COND 0x01
+#define SSP_CMD0_CMD_MMC_ALL_SEND_CID 0x02
+#define SSP_CMD0_CMD_MMC_SET_RELATIVE_ADDR 0x03
+#define SSP_CMD0_CMD_MMC_SET_DSR 0x04
+#define SSP_CMD0_CMD_MMC_RESERVED_5 0x05
+#define SSP_CMD0_CMD_MMC_SWITCH 0x06
+#define SSP_CMD0_CMD_MMC_SELECT_DESELECT_CARD 0x07
+#define SSP_CMD0_CMD_MMC_SEND_EXT_CSD 0x08
+#define SSP_CMD0_CMD_MMC_SEND_CSD 0x09
+#define SSP_CMD0_CMD_MMC_SEND_CID 0x0a
+#define SSP_CMD0_CMD_MMC_READ_DAT_UNTIL_STOP 0x0b
+#define SSP_CMD0_CMD_MMC_STOP_TRANSMISSION 0x0c
+#define SSP_CMD0_CMD_MMC_SEND_STATUS 0x0d
+#define SSP_CMD0_CMD_MMC_BUSTEST_R 0x0e
+#define SSP_CMD0_CMD_MMC_GO_INACTIVE_STATE 0x0f
+#define SSP_CMD0_CMD_MMC_SET_BLOCKLEN 0x10
+#define SSP_CMD0_CMD_MMC_READ_SINGLE_BLOCK 0x11
+#define SSP_CMD0_CMD_MMC_READ_MULTIPLE_BLOCK 0x12
+#define SSP_CMD0_CMD_MMC_BUSTEST_W 0x13
+#define SSP_CMD0_CMD_MMC_WRITE_DAT_UNTIL_STOP 0x14
+#define SSP_CMD0_CMD_MMC_SET_BLOCK_COUNT 0x17
+#define SSP_CMD0_CMD_MMC_WRITE_BLOCK 0x18
+#define SSP_CMD0_CMD_MMC_WRITE_MULTIPLE_BLOCK 0x19
+#define SSP_CMD0_CMD_MMC_PROGRAM_CID 0x1a
+#define SSP_CMD0_CMD_MMC_PROGRAM_CSD 0x1b
+#define SSP_CMD0_CMD_MMC_SET_WRITE_PROT 0x1c
+#define SSP_CMD0_CMD_MMC_CLR_WRITE_PROT 0x1d
+#define SSP_CMD0_CMD_MMC_SEND_WRITE_PROT 0x1e
+#define SSP_CMD0_CMD_MMC_ERASE_GROUP_START 0x23
+#define SSP_CMD0_CMD_MMC_ERASE_GROUP_END 0x24
+#define SSP_CMD0_CMD_MMC_ERASE 0x26
+#define SSP_CMD0_CMD_MMC_FAST_IO 0x27
+#define SSP_CMD0_CMD_MMC_GO_IRQ_STATE 0x28
+#define SSP_CMD0_CMD_MMC_LOCK_UNLOCK 0x2a
+#define SSP_CMD0_CMD_MMC_APP_CMD 0x37
+#define SSP_CMD0_CMD_MMC_GEN_CMD 0x38
+#define SSP_CMD0_CMD_SD_GO_IDLE_STATE 0x00
+#define SSP_CMD0_CMD_SD_ALL_SEND_CID 0x02
+#define SSP_CMD0_CMD_SD_SEND_RELATIVE_ADDR 0x03
+#define SSP_CMD0_CMD_SD_SET_DSR 0x04
+#define SSP_CMD0_CMD_SD_IO_SEND_OP_COND 0x05
+#define SSP_CMD0_CMD_SD_SELECT_DESELECT_CARD 0x07
+#define SSP_CMD0_CMD_SD_SEND_CSD 0x09
+#define SSP_CMD0_CMD_SD_SEND_CID 0x0a
+#define SSP_CMD0_CMD_SD_STOP_TRANSMISSION 0x0c
+#define SSP_CMD0_CMD_SD_SEND_STATUS 0x0d
+#define SSP_CMD0_CMD_SD_GO_INACTIVE_STATE 0x0f
+#define SSP_CMD0_CMD_SD_SET_BLOCKLEN 0x10
+#define SSP_CMD0_CMD_SD_READ_SINGLE_BLOCK 0x11
+#define SSP_CMD0_CMD_SD_READ_MULTIPLE_BLOCK 0x12
+#define SSP_CMD0_CMD_SD_WRITE_BLOCK 0x18
+#define SSP_CMD0_CMD_SD_WRITE_MULTIPLE_BLOCK 0x19
+#define SSP_CMD0_CMD_SD_PROGRAM_CSD 0x1b
+#define SSP_CMD0_CMD_SD_SET_WRITE_PROT 0x1c
+#define SSP_CMD0_CMD_SD_CLR_WRITE_PROT 0x1d
+#define SSP_CMD0_CMD_SD_SEND_WRITE_PROT 0x1e
+#define SSP_CMD0_CMD_SD_ERASE_WR_BLK_START 0x20
+#define SSP_CMD0_CMD_SD_ERASE_WR_BLK_END 0x21
+#define SSP_CMD0_CMD_SD_ERASE_GROUP_START 0x23
+#define SSP_CMD0_CMD_SD_ERASE_GROUP_END 0x24
+#define SSP_CMD0_CMD_SD_ERASE 0x26
+#define SSP_CMD0_CMD_SD_LOCK_UNLOCK 0x2a
+#define SSP_CMD0_CMD_SD_IO_RW_DIRECT 0x34
+#define SSP_CMD0_CMD_SD_IO_RW_EXTENDED 0x35
+#define SSP_CMD0_CMD_SD_APP_CMD 0x37
+#define SSP_CMD0_CMD_SD_GEN_CMD 0x38
+
+#define SSP_CMD1_CMD_ARG_MASK 0xffffffff
+#define SSP_CMD1_CMD_ARG_OFFSET 0
+
+#define SSP_XFER_SIZE_XFER_COUNT_MASK 0xffffffff
+#define SSP_XFER_SIZE_XFER_COUNT_OFFSET 0
+
+#define SSP_BLOCK_SIZE_BLOCK_COUNT_MASK (0xffffff << 4)
+#define SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET 4
+#define SSP_BLOCK_SIZE_BLOCK_SIZE_MASK 0xf
+#define SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET 0
+
+#define SSP_COMPREF_REFERENCE_MASK 0xffffffff
+#define SSP_COMPREF_REFERENCE_OFFSET 0
+
+#define SSP_COMPMASK_MASK_MASK 0xffffffff
+#define SSP_COMPMASK_MASK_OFFSET 0
+
+#define SSP_TIMING_TIMEOUT_MASK (0xffff << 16)
+#define SSP_TIMING_TIMEOUT_OFFSET 16
+#define SSP_TIMING_CLOCK_DIVIDE_MASK (0xff << 8)
+#define SSP_TIMING_CLOCK_DIVIDE_OFFSET 8
+#define SSP_TIMING_CLOCK_RATE_MASK 0xff
+#define SSP_TIMING_CLOCK_RATE_OFFSET 0
+
+#define SSP_CTRL1_SDIO_IRQ (1 << 31)
+#define SSP_CTRL1_SDIO_IRQ_EN (1 << 30)
+#define SSP_CTRL1_RESP_ERR_IRQ (1 << 29)
+#define SSP_CTRL1_RESP_ERR_IRQ_EN (1 << 28)
+#define SSP_CTRL1_RESP_TIMEOUT_IRQ (1 << 27)
+#define SSP_CTRL1_RESP_TIMEOUT_IRQ_EN (1 << 26)
+#define SSP_CTRL1_DATA_TIMEOUT_IRQ (1 << 25)
+#define SSP_CTRL1_DATA_TIMEOUT_IRQ_EN (1 << 24)
+#define SSP_CTRL1_DATA_CRC_IRQ (1 << 23)
+#define SSP_CTRL1_DATA_CRC_IRQ_EN (1 << 22)
+#define SSP_CTRL1_FIFO_UNDERRUN_IRQ (1 << 21)
+#define SSP_CTRL1_FIFO_UNDERRUN_EN (1 << 20)
+#define SSP_CTRL1_CEATA_CCS_ERR_IRQ (1 << 19)
+#define SSP_CTRL1_CEATA_CCS_ERR_IRQ_EN (1 << 18)
+#define SSP_CTRL1_RECV_TIMEOUT_IRQ (1 << 17)
+#define SSP_CTRL1_RECV_TIMEOUT_IRQ_EN (1 << 16)
+#define SSP_CTRL1_FIFO_OVERRUN_IRQ (1 << 15)
+#define SSP_CTRL1_FIFO_OVERRUN_IRQ_EN (1 << 14)
+#define SSP_CTRL1_DMA_ENABLE (1 << 13)
+#define SSP_CTRL1_CEATA_CCS_ERR_EN (1 << 12)
+#define SSP_CTRL1_SLAVE_OUT_DISABLE (1 << 11)
+#define SSP_CTRL1_PHASE (1 << 10)
+#define SSP_CTRL1_POLARITY (1 << 9)
+#define SSP_CTRL1_SLAVE_MODE (1 << 8)
+#define SSP_CTRL1_WORD_LENGTH_MASK (0xf << 4)
+#define SSP_CTRL1_WORD_LENGTH_OFFSET 4
+#define SSP_CTRL1_WORD_LENGTH_RESERVED0 (0x0 << 4)
+#define SSP_CTRL1_WORD_LENGTH_RESERVED1 (0x1 << 4)
+#define SSP_CTRL1_WORD_LENGTH_RESERVED2 (0x2 << 4)
+#define SSP_CTRL1_WORD_LENGTH_FOUR_BITS (0x3 << 4)
+#define SSP_CTRL1_WORD_LENGTH_EIGHT_BITS (0x7 << 4)
+#define SSP_CTRL1_WORD_LENGTH_SIXTEEN_BITS (0xf << 4)
+#define SSP_CTRL1_SSP_MODE_MASK 0xf
+#define SSP_CTRL1_SSP_MODE_OFFSET 0
+#define SSP_CTRL1_SSP_MODE_SPI 0x0
+#define SSP_CTRL1_SSP_MODE_SSI 0x1
+#define SSP_CTRL1_SSP_MODE_SD_MMC 0x3
+#define SSP_CTRL1_SSP_MODE_MS 0x4
+
+#define SSP_DATA_DATA_MASK 0xffffffff
+#define SSP_DATA_DATA_OFFSET 0
+
+#define SSP_SDRESP0_RESP0_MASK 0xffffffff
+#define SSP_SDRESP0_RESP0_OFFSET 0
+
+#define SSP_SDRESP1_RESP1_MASK 0xffffffff
+#define SSP_SDRESP1_RESP1_OFFSET 0
+
+#define SSP_SDRESP2_RESP2_MASK 0xffffffff
+#define SSP_SDRESP2_RESP2_OFFSET 0
+
+#define SSP_SDRESP3_RESP3_MASK 0xffffffff
+#define SSP_SDRESP3_RESP3_OFFSET 0
+
+#define SSP_DDR_CTRL_DMA_BURST_TYPE_MASK (0x3 << 30)
+#define SSP_DDR_CTRL_DMA_BURST_TYPE_OFFSET 30
+#define SSP_DDR_CTRL_NIBBLE_POS (1 << 1)
+#define SSP_DDR_CTRL_TXCLK_DELAY_TYPE (1 << 0)
+
+#define SSP_DLL_CTRL_REF_UPDATE_INT_MASK (0xf << 28)
+#define SSP_DLL_CTRL_REF_UPDATE_INT_OFFSET 28
+#define SSP_DLL_CTRL_SLV_UPDATE_INT_MASK (0xff << 20)
+#define SSP_DLL_CTRL_SLV_UPDATE_INT_OFFSET 20
+#define SSP_DLL_CTRL_SLV_OVERRIDE_VAL_MASK (0x3f << 10)
+#define SSP_DLL_CTRL_SLV_OVERRIDE_VAL_OFFSET 10
+#define SSP_DLL_CTRL_SLV_OVERRIDE (1 << 9)
+#define SSP_DLL_CTRL_GATE_UPDATE (1 << 7)
+#define SSP_DLL_CTRL_SLV_DLY_TARGET_MASK (0xf << 3)
+#define SSP_DLL_CTRL_SLV_DLY_TARGET_OFFSET 3
+#define SSP_DLL_CTRL_SLV_FORCE_UPD (1 << 2)
+#define SSP_DLL_CTRL_RESET (1 << 1)
+#define SSP_DLL_CTRL_ENABLE (1 << 0)
+
+#define SSP_STATUS_PRESENT (1 << 31)
+#define SSP_STATUS_MS_PRESENT (1 << 30)
+#define SSP_STATUS_SD_PRESENT (1 << 29)
+#define SSP_STATUS_CARD_DETECT (1 << 28)
+#define SSP_STATUS_DMABURST (1 << 22)
+#define SSP_STATUS_DMASENSE (1 << 21)
+#define SSP_STATUS_DMATERM (1 << 20)
+#define SSP_STATUS_DMAREQ (1 << 19)
+#define SSP_STATUS_DMAEND (1 << 18)
+#define SSP_STATUS_SDIO_IRQ (1 << 17)
+#define SSP_STATUS_RESP_CRC_ERR (1 << 16)
+#define SSP_STATUS_RESP_ERR (1 << 15)
+#define SSP_STATUS_RESP_TIMEOUT (1 << 14)
+#define SSP_STATUS_DATA_CRC_ERR (1 << 13)
+#define SSP_STATUS_TIMEOUT (1 << 12)
+#define SSP_STATUS_RECV_TIMEOUT_STAT (1 << 11)
+#define SSP_STATUS_CEATA_CCS_ERR (1 << 10)
+#define SSP_STATUS_FIFO_OVRFLW (1 << 9)
+#define SSP_STATUS_FIFO_FULL (1 << 8)
+#define SSP_STATUS_FIFO_EMPTY (1 << 5)
+#define SSP_STATUS_FIFO_UNDRFLW (1 << 4)
+#define SSP_STATUS_CMD_BUSY (1 << 3)
+#define SSP_STATUS_DATA_BUSY (1 << 2)
+#define SSP_STATUS_BUSY (1 << 0)
+
+#define SSP_DLL_STS_REF_SEL_MASK (0x3f << 8)
+#define SSP_DLL_STS_REF_SEL_OFFSET 8
+#define SSP_DLL_STS_SLV_SEL_MASK (0x3f << 2)
+#define SSP_DLL_STS_SLV_SEL_OFFSET 2
+#define SSP_DLL_STS_REF_LOCK (1 << 1)
+#define SSP_DLL_STS_SLV_LOCK (1 << 0)
+
+#define SSP_DEBUG_DATACRC_ERR_MASK (0xf << 28)
+#define SSP_DEBUG_DATACRC_ERR_OFFSET 28
+#define SSP_DEBUG_DATA_STALL (1 << 27)
+#define SSP_DEBUG_DAT_SM_MASK (0x7 << 24)
+#define SSP_DEBUG_DAT_SM_OFFSET 24
+#define SSP_DEBUG_DAT_SM_DSM_IDLE (0x0 << 24)
+#define SSP_DEBUG_DAT_SM_DSM_WORD (0x2 << 24)
+#define SSP_DEBUG_DAT_SM_DSM_CRC1 (0x3 << 24)
+#define SSP_DEBUG_DAT_SM_DSM_CRC2 (0x4 << 24)
+#define SSP_DEBUG_DAT_SM_DSM_END (0x5 << 24)
+#define SSP_DEBUG_MSTK_SM_MASK (0xf << 20)
+#define SSP_DEBUG_MSTK_SM_OFFSET 20
+#define SSP_DEBUG_MSTK_SM_MSTK_IDLE (0x0 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_CKON (0x1 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_BS1 (0x2 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_TPC (0x3 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_BS2 (0x4 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_HDSHK (0x5 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_BS3 (0x6 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_RW (0x7 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_CRC1 (0x8 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_CRC2 (0x9 << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_BS0 (0xa << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_END1 (0xb << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_END2W (0xc << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_END2R (0xd << 20)
+#define SSP_DEBUG_MSTK_SM_MSTK_DONE (0xe << 20)
+#define SSP_DEBUG_CMD_OE (1 << 19)
+#define SSP_DEBUG_DMA_SM_MASK (0x7 << 16)
+#define SSP_DEBUG_DMA_SM_OFFSET 16
+#define SSP_DEBUG_DMA_SM_DMA_IDLE (0x0 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_DMAREQ (0x1 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_DMAACK (0x2 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_STALL (0x3 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_BUSY (0x4 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_DONE (0x5 << 16)
+#define SSP_DEBUG_DMA_SM_DMA_COUNT (0x6 << 16)
+#define SSP_DEBUG_MMC_SM_MASK (0xf << 12)
+#define SSP_DEBUG_MMC_SM_OFFSET 12
+#define SSP_DEBUG_MMC_SM_MMC_IDLE (0x0 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_CMD (0x1 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_TRC (0x2 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_RESP (0x3 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_RPRX (0x4 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_TX (0x5 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_CTOK (0x6 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_RX (0x7 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_CCS (0x8 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_PUP (0x9 << 12)
+#define SSP_DEBUG_MMC_SM_MMC_WAIT (0xa << 12)
+#define SSP_DEBUG_CMD_SM_MASK (0x3 << 10)
+#define SSP_DEBUG_CMD_SM_OFFSET 10
+#define SSP_DEBUG_CMD_SM_CSM_IDLE (0x0 << 10)
+#define SSP_DEBUG_CMD_SM_CSM_INDEX (0x1 << 10)
+#define SSP_DEBUG_CMD_SM_CSM_ARG (0x2 << 10)
+#define SSP_DEBUG_CMD_SM_CSM_CRC (0x3 << 10)
+#define SSP_DEBUG_SSP_CMD (1 << 9)
+#define SSP_DEBUG_SSP_RESP (1 << 8)
+#define SSP_DEBUG_SSP_RXD_MASK 0xff
+#define SSP_DEBUG_SSP_RXD_OFFSET 0
+
+#define SSP_VERSION_MAJOR_MASK (0xff << 24)
+#define SSP_VERSION_MAJOR_OFFSET 24
+#define SSP_VERSION_MINOR_MASK (0xff << 16)
+#define SSP_VERSION_MINOR_OFFSET 16
+#define SSP_VERSION_STEP_MASK 0xffff
+#define SSP_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_SSP_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-timrot.h b/arch/arm/include/asm/arch-mx28/regs-timrot.h
new file mode 100644
index 0000000..1b941cf
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-timrot.h
@@ -0,0 +1,171 @@
+/*
+ * Freescale i.MX28 TIMROT Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on code from LTIB:
+ * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_REGS_TIMROT_H__
+#define __MX28_REGS_TIMROT_H__
+
+#include <asm/arch/regs-common.h>
+
+#ifndef __ASSEMBLY__
+struct mx28_timrot_regs {
+ mx28_reg(hw_timrot_rotctrl)
+ mx28_reg(hw_timrot_rotcount)
+ mx28_reg(hw_timrot_timctrl0)
+ mx28_reg(hw_timrot_running_count0)
+ mx28_reg(hw_timrot_fixed_count0)
+ mx28_reg(hw_timrot_match_count0)
+ mx28_reg(hw_timrot_timctrl1)
+ mx28_reg(hw_timrot_running_count1)
+ mx28_reg(hw_timrot_fixed_count1)
+ mx28_reg(hw_timrot_match_count1)
+ mx28_reg(hw_timrot_timctrl2)
+ mx28_reg(hw_timrot_running_count2)
+ mx28_reg(hw_timrot_fixed_count2)
+ mx28_reg(hw_timrot_match_count2)
+ mx28_reg(hw_timrot_timctrl3)
+ mx28_reg(hw_timrot_running_count3)
+ mx28_reg(hw_timrot_fixed_count3)
+ mx28_reg(hw_timrot_match_count3)
+ mx28_reg(hw_timrot_version)
+};
+#endif
+
+#define TIMROT_ROTCTRL_SFTRST (1 << 31)
+#define TIMROT_ROTCTRL_CLKGATE (1 << 30)
+#define TIMROT_ROTCTRL_ROTARY_PRESENT (1 << 29)
+#define TIMROT_ROTCTRL_TIM3_PRESENT (1 << 28)
+#define TIMROT_ROTCTRL_TIM2_PRESENT (1 << 27)
+#define TIMROT_ROTCTRL_TIM1_PRESENT (1 << 26)
+#define TIMROT_ROTCTRL_TIM0_PRESENT (1 << 25)
+#define TIMROT_ROTCTRL_STATE_MASK (0x7 << 22)
+#define TIMROT_ROTCTRL_STATE_OFFSET 22
+#define TIMROT_ROTCTRL_DIVIDER_MASK (0x3f << 16)
+#define TIMROT_ROTCTRL_DIVIDER_OFFSET 16
+#define TIMROT_ROTCTRL_RELATIVE (1 << 12)
+#define TIMROT_ROTCTRL_OVERSAMPLE_MASK (0x3 << 10)
+#define TIMROT_ROTCTRL_OVERSAMPLE_OFFSET 10
+#define TIMROT_ROTCTRL_OVERSAMPLE_8X (0x0 << 10)
+#define TIMROT_ROTCTRL_OVERSAMPLE_4X (0x1 << 10)
+#define TIMROT_ROTCTRL_OVERSAMPLE_2X (0x2 << 10)
+#define TIMROT_ROTCTRL_OVERSAMPLE_1X (0x3 << 10)
+#define TIMROT_ROTCTRL_POLARITY_B (1 << 9)
+#define TIMROT_ROTCTRL_POLARITY_A (1 << 8)
+#define TIMROT_ROTCTRL_SELECT_B_MASK (0xf << 4)
+#define TIMROT_ROTCTRL_SELECT_B_OFFSET 4
+#define TIMROT_ROTCTRL_SELECT_B_NEVER_TICK (0x0 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM0 (0x1 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM1 (0x2 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM2 (0x3 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM3 (0x4 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM4 (0x5 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM5 (0x6 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM6 (0x7 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_PWM7 (0x8 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_ROTARYA (0x9 << 4)
+#define TIMROT_ROTCTRL_SELECT_B_ROTARYB (0xa << 4)
+#define TIMROT_ROTCTRL_SELECT_A_MASK 0xf
+#define TIMROT_ROTCTRL_SELECT_A_OFFSET 0
+#define TIMROT_ROTCTRL_SELECT_A_NEVER_TICK 0x0
+#define TIMROT_ROTCTRL_SELECT_A_PWM0 0x1
+#define TIMROT_ROTCTRL_SELECT_A_PWM1 0x2
+#define TIMROT_ROTCTRL_SELECT_A_PWM2 0x3
+#define TIMROT_ROTCTRL_SELECT_A_PWM3 0x4
+#define TIMROT_ROTCTRL_SELECT_A_PWM4 0x5
+#define TIMROT_ROTCTRL_SELECT_A_PWM5 0x6
+#define TIMROT_ROTCTRL_SELECT_A_PWM6 0x7
+#define TIMROT_ROTCTRL_SELECT_A_PWM7 0x8
+#define TIMROT_ROTCTRL_SELECT_A_ROTARYA 0x9
+#define TIMROT_ROTCTRL_SELECT_A_ROTARYB 0xa
+
+#define TIMROT_ROTCOUNT_UPDOWN_MASK 0xffff
+#define TIMROT_ROTCOUNT_UPDOWN_OFFSET 0
+
+#define TIMROT_TIMCTRLn_IRQ (1 << 15)
+#define TIMROT_TIMCTRLn_IRQ_EN (1 << 14)
+#define TIMROT_TIMCTRLn_MATCH_MODE (1 << 11)
+#define TIMROT_TIMCTRLn_POLARITY (1 << 8)
+#define TIMROT_TIMCTRLn_UPDATE (1 << 7)
+#define TIMROT_TIMCTRLn_RELOAD (1 << 6)
+#define TIMROT_TIMCTRLn_PRESCALE_MASK (0x3 << 4)
+#define TIMROT_TIMCTRLn_PRESCALE_OFFSET 4
+#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_1 (0x0 << 4)
+#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_2 (0x1 << 4)
+#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_4 (0x2 << 4)
+#define TIMROT_TIMCTRLn_PRESCALE_DIV_BY_8 (0x3 << 4)
+#define TIMROT_TIMCTRLn_SELECT_MASK 0xf
+#define TIMROT_TIMCTRLn_SELECT_OFFSET 0
+#define TIMROT_TIMCTRLn_SELECT_NEVER_TICK 0x0
+#define TIMROT_TIMCTRLn_SELECT_PWM0 0x1
+#define TIMROT_TIMCTRLn_SELECT_PWM1 0x2
+#define TIMROT_TIMCTRLn_SELECT_PWM2 0x3
+#define TIMROT_TIMCTRLn_SELECT_PWM3 0x4
+#define TIMROT_TIMCTRLn_SELECT_PWM4 0x5
+#define TIMROT_TIMCTRLn_SELECT_PWM5 0x6
+#define TIMROT_TIMCTRLn_SELECT_PWM6 0x7
+#define TIMROT_TIMCTRLn_SELECT_PWM7 0x8
+#define TIMROT_TIMCTRLn_SELECT_ROTARYA 0x9
+#define TIMROT_TIMCTRLn_SELECT_ROTARYB 0xa
+#define TIMROT_TIMCTRLn_SELECT_32KHZ_XTAL 0xb
+#define TIMROT_TIMCTRLn_SELECT_8KHZ_XTAL 0xc
+#define TIMROT_TIMCTRLn_SELECT_4KHZ_XTAL 0xd
+#define TIMROT_TIMCTRLn_SELECT_1KHZ_XTAL 0xe
+#define TIMROT_TIMCTRLn_SELECT_TICK_ALWAYS 0xf
+
+#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_MASK 0xffffffff
+#define TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET 0
+
+#define TIMROT_FIXED_COUNTn_FIXED_COUNT_MASK 0xffffffff
+#define TIMROT_FIXED_COUNTn_FIXED_COUNT_OFFSET 0
+
+#define TIMROT_MATCH_COUNTn_MATCH_COUNT_MASK 0xffffffff
+#define TIMROT_MATCH_COUNTn_MATCH_COUNT_OFFSET 0
+
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_MASK (0xf << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_OFFSET 16
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_NEVER_TICK (0x0 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM0 (0x1 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM1 (0x2 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM2 (0x3 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM3 (0x4 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM4 (0x5 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM5 (0x6 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM6 (0x7 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_PWM7 (0x8 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYA (0x9 << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_ROTARYB (0xa << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_32KHZ_XTAL (0xb << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_8KHZ_XTAL (0xc << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_4KHZ_XTAL (0xd << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_1KHZ_XTAL (0xe << 16)
+#define TIMROT_TIMCTRL3_TEST_SIGNAL_TICK_ALWAYS (0xf << 16)
+#define TIMROT_TIMCTRL3_DUTY_CYCLE (1 << 9)
+
+#define TIMROT_VERSION_MAJOR_MASK (0xff << 24)
+#define TIMROT_VERSION_MAJOR_OFFSET 24
+#define TIMROT_VERSION_MINOR_MASK (0xff << 16)
+#define TIMROT_VERSION_MINOR_OFFSET 16
+#define TIMROT_VERSION_STEP_MASK 0xffff
+#define TIMROT_VERSION_STEP_OFFSET 0
+
+#endif /* __MX28_REGS_TIMROT_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-usb.h b/arch/arm/include/asm/arch-mx28/regs-usb.h
new file mode 100644
index 0000000..ea61de8
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-usb.h
@@ -0,0 +1,178 @@
+/*
+ * Freescale i.MX28 USB OTG Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_USB_H__
+#define __REGS_USB_H__
+
+struct mx28_usb_regs {
+ uint32_t hw_usbctrl_id; /* 0x000 */
+ uint32_t hw_usbctrl_hwgeneral; /* 0x004 */
+ uint32_t hw_usbctrl_hwhost; /* 0x008 */
+ uint32_t hw_usbctrl_hwdevice; /* 0x00c */
+ uint32_t hw_usbctrl_hwtxbuf; /* 0x010 */
+ uint32_t hw_usbctrl_hwrxbuf; /* 0x014 */
+
+ uint32_t reserved1[26];
+
+ uint32_t hw_usbctrl_gptimer0ld; /* 0x080 */
+ uint32_t hw_usbctrl_gptimer0ctrl; /* 0x084 */
+ uint32_t hw_usbctrl_gptimer1ld; /* 0x088 */
+ uint32_t hw_usbctrl_gptimer1ctrl; /* 0x08c */
+ uint32_t hw_usbctrl_sbuscfg; /* 0x090 */
+
+ uint32_t reserved2[27];
+
+ uint32_t hw_usbctrl_caplength; /* 0x100 */
+ uint32_t hw_usbctrl_hcsparams; /* 0x104 */
+ uint32_t hw_usbctrl_hccparams; /* 0x108 */
+
+ uint32_t reserved3[5];
+
+ uint32_t hw_usbctrl_dciversion; /* 0x120 */
+ uint32_t hw_usbctrl_dccparams; /* 0x124 */
+
+ uint32_t reserved4[6];
+
+ uint32_t hw_usbctrl_usbcmd; /* 0x140 */
+ uint32_t hw_usbctrl_usbsts; /* 0x144 */
+ uint32_t hw_usbctrl_usbintr; /* 0x148 */
+ uint32_t hw_usbctrl_frindex; /* 0x14c */
+
+ uint32_t reserved5;
+
+ union {
+ uint32_t hw_usbctrl_periodiclistbase; /* 0x154 */
+ uint32_t hw_usbctrl_deviceaddr; /* 0x154 */
+ };
+ union {
+ uint32_t hw_usbctrl_asynclistaddr; /* 0x158 */
+ uint32_t hw_usbctrl_endpointlistaddr; /* 0x158 */
+ };
+
+ uint32_t hw_usbctrl_ttctrl; /* 0x15c */
+ uint32_t hw_usbctrl_burstsize; /* 0x160 */
+ uint32_t hw_usbctrl_txfilltuning; /* 0x164 */
+
+ uint32_t reserved6;
+
+ uint32_t hw_usbctrl_ic_usb; /* 0x16c */
+ uint32_t hw_usbctrl_ulpi; /* 0x170 */
+
+ uint32_t reserved7;
+
+ uint32_t hw_usbctrl_endptnak; /* 0x178 */
+ uint32_t hw_usbctrl_endptnaken; /* 0x17c */
+
+ uint32_t reserved8;
+
+ uint32_t hw_usbctrl_portsc1; /* 0x184 */
+
+ uint32_t reserved9[7];
+
+ uint32_t hw_usbctrl_otgsc; /* 0x1a4 */
+ uint32_t hw_usbctrl_usbmode; /* 0x1a8 */
+ uint32_t hw_usbctrl_endptsetupstat; /* 0x1ac */
+ uint32_t hw_usbctrl_endptprime; /* 0x1b0 */
+ uint32_t hw_usbctrl_endptflush; /* 0x1b4 */
+ uint32_t hw_usbctrl_endptstat; /* 0x1b8 */
+ uint32_t hw_usbctrl_endptcomplete; /* 0x1bc */
+ uint32_t hw_usbctrl_endptctrl0; /* 0x1c0 */
+ uint32_t hw_usbctrl_endptctrl1; /* 0x1c4 */
+ uint32_t hw_usbctrl_endptctrl2; /* 0x1c8 */
+ uint32_t hw_usbctrl_endptctrl3; /* 0x1cc */
+ uint32_t hw_usbctrl_endptctrl4; /* 0x1d0 */
+ uint32_t hw_usbctrl_endptctrl5; /* 0x1d4 */
+ uint32_t hw_usbctrl_endptctrl6; /* 0x1d8 */
+ uint32_t hw_usbctrl_endptctrl7; /* 0x1dc */
+};
+
+#define CLKCTRL_PLL0CTRL0_LFR_SEL_MASK (0x3 << 28)
+
+#define HW_USBCTRL_ID_CIVERSION_OFFSET 29
+#define HW_USBCTRL_ID_CIVERSION_MASK (0x7 << 29)
+#define HW_USBCTRL_ID_VERSION_OFFSET 25
+#define HW_USBCTRL_ID_VERSION_MASK (0xf << 25)
+#define HW_USBCTRL_ID_REVISION_OFFSET 21
+#define HW_USBCTRL_ID_REVISION_MASK (0xf << 21)
+#define HW_USBCTRL_ID_TAG_OFFSET 16
+#define HW_USBCTRL_ID_TAG_MASK (0x1f << 16)
+#define HW_USBCTRL_ID_NID_OFFSET 8
+#define HW_USBCTRL_ID_NID_MASK (0x3f << 8)
+#define HW_USBCTRL_ID_ID_OFFSET 0
+#define HW_USBCTRL_ID_ID_MASK (0x3f << 0)
+
+#define HW_USBCTRL_HWGENERAL_SM_OFFSET 9
+#define HW_USBCTRL_HWGENERAL_SM_MASK (0x3 << 9)
+#define HW_USBCTRL_HWGENERAL_PHYM_OFFSET 6
+#define HW_USBCTRL_HWGENERAL_PHYM_MASK (0x7 << 6)
+#define HW_USBCTRL_HWGENERAL_PHYW_OFFSET 4
+#define HW_USBCTRL_HWGENERAL_PHYW_MASK (0x3 << 4)
+#define HW_USBCTRL_HWGENERAL_BWT (1 << 3)
+#define HW_USBCTRL_HWGENERAL_CLKC_OFFSET 1
+#define HW_USBCTRL_HWGENERAL_CLKC_MASK (0x3 << 1)
+#define HW_USBCTRL_HWGENERAL_RT (1 << 0)
+
+#define HW_USBCTRL_HWHOST_TTPER_OFFSET 24
+#define HW_USBCTRL_HWHOST_TTPER_MASK (0xff << 24)
+#define HW_USBCTRL_HWHOST_TTASY_OFFSET 16
+#define HW_USBCTRL_HWHOST_TTASY_MASK (0xff << 19)
+#define HW_USBCTRL_HWHOST_NPORT_OFFSET 1
+#define HW_USBCTRL_HWHOST_NPORT_MASK (0x7 << 1)
+#define HW_USBCTRL_HWHOST_HC (1 << 0)
+
+#define HW_USBCTRL_HWDEVICE_DEVEP_OFFSET 1
+#define HW_USBCTRL_HWDEVICE_DEVEP_MASK (0x1f << 1)
+#define HW_USBCTRL_HWDEVICE_DC (1 << 0)
+
+#define HW_USBCTRL_HWTXBUF_TXLCR (1 << 31)
+#define HW_USBCTRL_HWTXBUF_TXCHANADD_OFFSET 16
+#define HW_USBCTRL_HWTXBUF_TXCHANADD_MASK (0xff << 16)
+#define HW_USBCTRL_HWTXBUF_TXADD_OFFSET 8
+#define HW_USBCTRL_HWTXBUF_TXADD_MASK (0xff << 8)
+#define HW_USBCTRL_HWTXBUF_TXBURST_OFFSET 0
+#define HW_USBCTRL_HWTXBUF_TXBURST_MASK 0xff
+
+#define HW_USBCTRL_HWRXBUF_RXADD_OFFSET 8
+#define HW_USBCTRL_HWRXBUF_RXADD_MASK (0xff << 8)
+#define HW_USBCTRL_HWRXBUF_RXBURST_OFFSET 0
+#define HW_USBCTRL_HWRXBUF_RXBURST_MASK 0xff
+
+#define HW_USBCTRL_GPTIMERLD_GPTLD_OFFSET 0
+#define HW_USBCTRL_GPTIMERLD_GPTLD_MASK 0xffffff
+
+#define HW_USBCTRL_GPTIMERCTRL_GPTRUN (1 << 31)
+#define HW_USBCTRL_GPTIMERCTRL_GPTRST (1 << 30)
+#define HW_USBCTRL_GPTIMERCTRL_GPTMODE (1 << 24)
+#define HW_USBCTRL_GPTIMERCTRL_GPTCNT_OFFSET 0
+#define HW_USBCTRL_GPTIMERCTRL_GPTCNT_MASK 0xffffff
+
+#define HW_USBCTRL_SBUSCFG_AHBBURST_OFFSET 0
+#define HW_USBCTRL_SBUSCFG_AHBBURST_MASK 0x7
+#define HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR 0x0
+#define HW_USBCTRL_SBUSCFG_AHBBURST_S_INCR4 0x1
+#define HW_USBCTRL_SBUSCFG_AHBBURST_S_INCR8 0x2
+#define HW_USBCTRL_SBUSCFG_AHBBURST_S_INCR16 0x3
+#define HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR4 0x5
+#define HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR8 0x6
+#define HW_USBCTRL_SBUSCFG_AHBBURST_U_INCR16 0x7
+
+#endif /* __REGS_USB_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/regs-usbphy.h b/arch/arm/include/asm/arch-mx28/regs-usbphy.h
new file mode 100644
index 0000000..e823e19
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/regs-usbphy.h
@@ -0,0 +1,151 @@
+/*
+ * Freescale i.MX28 USB PHY Register Definitions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __REGS_USBPHY_H__
+#define __REGS_USBPHY_H__
+
+struct mx28_usbphy_regs {
+ mx28_reg(hw_usbphy_pwd)
+ mx28_reg(hw_usbphy_tx)
+ mx28_reg(hw_usbphy_rx)
+ mx28_reg(hw_usbphy_ctrl)
+ mx28_reg(hw_usbphy_status)
+ mx28_reg(hw_usbphy_debug)
+ mx28_reg(hw_usbphy_debug0_status)
+ mx28_reg(hw_usbphy_debug1)
+ mx28_reg(hw_usbphy_version)
+ mx28_reg(hw_usbphy_ip)
+};
+
+#define USBPHY_PWD_RXPWDRX (1 << 20)
+#define USBPHY_PWD_RXPWDDIFF (1 << 19)
+#define USBPHY_PWD_RXPWD1PT1 (1 << 18)
+#define USBPHY_PWD_RXPWDENV (1 << 17)
+#define USBPHY_PWD_TXPWDV2I (1 << 12)
+#define USBPHY_PWD_TXPWDIBIAS (1 << 11)
+#define USBPHY_PWD_TXPWDFS (1 << 10)
+
+#define USBPHY_TX_USBPHY_TX_EDGECTRL_OFFSET 26
+#define USBPHY_TX_USBPHY_TX_EDGECTRL_MASK (0x7 << 26)
+#define USBPHY_TX_USBPHY_TX_SYNC_INVERT (1 << 25)
+#define USBPHY_TX_USBPHY_TX_SYNC_MUX (1 << 24)
+#define USBPHY_TX_TXENCAL45DP (1 << 21)
+#define USBPHY_TX_TXCAL45DP_OFFSET 16
+#define USBPHY_TX_TXCAL45DP_MASK (0xf << 16)
+#define USBPHY_TX_TXENCAL45DM (1 << 13)
+#define USBPHY_TX_TXCAL45DM_OFFSET 8
+#define USBPHY_TX_TXCAL45DM_MASK (0xf << 8)
+#define USBPHY_TX_D_CAL_OFFSET 0
+#define USBPHY_TX_D_CAL_MASK 0xf
+
+#define USBPHY_RX_RXDBYPASS (1 << 22)
+#define USBPHY_RX_DISCONADJ_OFFSET 4
+#define USBPHY_RX_DISCONADJ_MASK (0x7 << 4)
+#define USBPHY_RX_ENVADJ_OFFSET 0
+#define USBPHY_RX_ENVADJ_MASK 0x7
+
+#define USBPHY_CTRL_SFTRST (1 << 31)
+#define USBPHY_CTRL_CLKGATE (1 << 30)
+#define USBPHY_CTRL_UTMI_SUSPENDM (1 << 29)
+#define USBPHY_CTRL_HOST_FORCE_LS_SE0 (1 << 28)
+#define USBPHY_CTRL_ENAUTOSET_USBCLKS (1 << 26)
+#define USBPHY_CTRL_ENAUTOCLR_USBCLKGATE (1 << 25)
+#define USBPHY_CTRL_FSDLL_RST_EN (1 << 24)
+#define USBPHY_CTRL_ENVBUSCHG_WKUP (1 << 23)
+#define USBPHY_CTRL_ENIDCHG_WKUP (1 << 22)
+#define USBPHY_CTRL_ENDPDMCHG_WKUP (1 << 21)
+#define USBPHY_CTRL_ENAUTOCLR_PHY_PWD (1 << 20)
+#define USBPHY_CTRL_ENAUTOCLR_CLKGATE (1 << 19)
+#define USBPHY_CTRL_ENAUTO_PWRON_PLL (1 << 18)
+#define USBPHY_CTRL_WAKEUP_IRQ (1 << 17)
+#define USBPHY_CTRL_ENIRQWAKEUP (1 << 16)
+#define USBPHY_CTRL_ENUTMILEVEL3 (1 << 15)
+#define USBPHY_CTRL_ENUTMILEVEL2 (1 << 14)
+#define USBPHY_CTRL_DATA_ON_LRADC (1 << 13)
+#define USBPHY_CTRL_DEVPLUGIN_IRQ (1 << 12)
+#define USBPHY_CTRL_ENIRQDEVPLUGIN (1 << 11)
+#define USBPHY_CTRL_RESUME_IRQ (1 << 10)
+#define USBPHY_CTRL_ENIRQRESUMEDETECT (1 << 9)
+#define USBPHY_CTRL_RESUMEIRQSTICKY (1 << 8)
+#define USBPHY_CTRL_ENOTGIDDETECT (1 << 7)
+#define USBPHY_CTRL_DEVPLUGIN_POLARITY (1 << 5)
+#define USBPHY_CTRL_ENDEVPLUGINDETECT (1 << 4)
+#define USBPHY_CTRL_HOSTDISCONDETECT_IRQ (1 << 3)
+#define USBPHY_CTRL_ENIRQHOSTDISCON (1 << 2)
+#define USBPHY_CTRL_ENHOSTDISCONDETECT (1 << 1)
+
+#define USBPHY_STATUS_RESUME_STATUS (1 << 10)
+#define USBPHY_STATUS_OTGID_STATUS (1 << 8)
+#define USBPHY_STATUS_DEVPLUGIN_STATUS (1 << 6)
+#define USBPHY_STATUS_HOSTDISCONDETECT_STATUS (1 << 3)
+
+#define USBPHY_DEBUG_CLKGATE (1 << 30)
+#define USBPHY_DEBUG_HOST_RESUME_DEBUG (1 << 29)
+#define USBPHY_DEBUG_SQUELCHRESETLENGTH_OFFSET 25
+#define USBPHY_DEBUG_SQUELCHRESETLENGTH_MASK (0xf << 25)
+#define USBPHY_DEBUG_ENSQUELCHRESET (1 << 24)
+#define USBPHY_DEBUG_SQUELCHRESETCOUNT_OFFSET 16
+#define USBPHY_DEBUG_SQUELCHRESETCOUNT_MASK (0x1f << 16)
+#define USBPHY_DEBUG_ENTX2RXCOUNT (1 << 12)
+#define USBPHY_DEBUG_TX2RXCOUNT_OFFSET 8
+#define USBPHY_DEBUG_TX2RXCOUNT_MASK (0xf << 8)
+#define USBPHY_DEBUG_ENHSTPULLDOWN_OFFSET 4
+#define USBPHY_DEBUG_ENHSTPULLDOWN_MASK (0x3 << 4)
+#define USBPHY_DEBUG_HSTPULLDOWN_OFFSET 2
+#define USBPHY_DEBUG_HSTPULLDOWN_MASK (0x3 << 2)
+#define USBPHY_DEBUG_DEBUG_INTERFACE_HOLD (1 << 1)
+#define USBPHY_DEBUG_OTGIDPIDLOCK (1 << 0)
+
+#define USBPHY_DEBUG0_STATUS_SQUELCH_COUNT_OFFSET 26
+#define USBPHY_DEBUG0_STATUS_SQUELCH_COUNT_MASK (0x3f << 26)
+#define USBPHY_DEBUG0_STATUS_UTMI_RXERROR_OFFSET 16
+#define USBPHY_DEBUG0_STATUS_UTMI_RXERROR_MASK (0x3ff << 16)
+#define USBPHY_DEBUG0_STATUS_LOOP_BACK_OFFSET 0
+#define USBPHY_DEBUG0_STATUS_LOOP_BACK_MASK 0xffff
+
+#define USBPHY_DEBUG1_ENTAILADJVD_OFFSET 13
+#define USBPHY_DEBUG1_ENTAILADJVD_MASK (0x3 << 13)
+#define USBPHY_DEBUG1_ENTX2TX (1 << 12)
+#define USBPHY_DEBUG1_DBG_ADDRESS_OFFSET 0
+#define USBPHY_DEBUG1_DBG_ADDRESS_MASK 0xf
+
+#define USBPHY_VERSION_MAJOR_MASK (0xff << 24)
+#define USBPHY_VERSION_MAJOR_OFFSET 24
+#define USBPHY_VERSION_MINOR_MASK (0xff << 16)
+#define USBPHY_VERSION_MINOR_OFFSET 16
+#define USBPHY_VERSION_STEP_MASK 0xffff
+#define USBPHY_VERSION_STEP_OFFSET 0
+
+#define USBPHY_IP_DIV_SEL_OFFSET 23
+#define USBPHY_IP_DIV_SEL_MASK (0x3 << 23)
+#define USBPHY_IP_LFR_SEL_OFFSET 21
+#define USBPHY_IP_LFR_SEL_MASK (0x3 << 21)
+#define USBPHY_IP_CP_SEL_OFFSET 19
+#define USBPHY_IP_CP_SEL_MASK (0x3 << 19)
+#define USBPHY_IP_TSTI_TX_DP (1 << 18)
+#define USBPHY_IP_TSTI_TX_DM (1 << 17)
+#define USBPHY_IP_ANALOG_TESTMODE (1 << 16)
+#define USBPHY_IP_EN_USB_CLKS (1 << 2)
+#define USBPHY_IP_PLL_LOCKED (1 << 1)
+#define USBPHY_IP_PLL_POWER (1 << 0)
+
+#endif /* __REGS_USBPHY_H__ */
diff --git a/arch/arm/include/asm/arch-mx28/sys_proto.h b/arch/arm/include/asm/arch-mx28/sys_proto.h
new file mode 100644
index 0000000..a226ea4
--- /dev/null
+++ b/arch/arm/include/asm/arch-mx28/sys_proto.h
@@ -0,0 +1,32 @@
+/*
+ * Freescale i.MX28 MX28 specific functions
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __MX28_H__
+#define __MX28_H__
+
+int mx28_reset_block(struct mx28_register *reg);
+int mx28_wait_mask_set(struct mx28_register *reg, uint32_t mask, int timeout);
+int mx28_wait_mask_clr(struct mx28_register *reg, uint32_t mask, int timeout);
+
+int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int));
+
+#endif /* __MX28_H__ */
diff --git a/arch/arm/include/asm/arch-mx31/imx-regs.h b/arch/arm/include/asm/arch-mx31/imx-regs.h
index afdaa1c..0147920 100644
--- a/arch/arm/include/asm/arch-mx31/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx31/imx-regs.h
@@ -98,6 +98,12 @@ struct iim_regs {
u32 iim_scs3;
};
+struct iomuxc_regs {
+ u32 unused1;
+ u32 unused2;
+ u32 gpr;
+};
+
struct mx3_cpu_type {
u8 srev;
u32 v;
@@ -636,7 +642,6 @@ struct esdc_regs {
#define WEIM_BASE 0xb8002000
#define IOMUXC_BASE 0x43FAC000
-#define IOMUXC_GPR (IOMUXC_BASE + 0x8)
#define IOMUXC_SW_MUX_CTL(x) (IOMUXC_BASE + 0xc + (x) * 4)
#define IOMUXC_SW_PAD_CTL(x) (IOMUXC_BASE + 0x154 + (x) * 4)
diff --git a/arch/arm/include/asm/arch-omap3/mmc_host_def.h b/arch/arm/include/asm/arch-omap3/mmc_host_def.h
index ba1c2ff..2963679 100644
--- a/arch/arm/include/asm/arch-omap3/mmc_host_def.h
+++ b/arch/arm/include/asm/arch-omap3/mmc_host_def.h
@@ -55,7 +55,7 @@ typedef struct t2 {
#define OMAP_HSMMC2_BASE 0x480B4000
#define OMAP_HSMMC3_BASE 0x480AD000
-typedef struct hsmmc {
+struct hsmmc {
unsigned char res1[0x10];
unsigned int sysconfig; /* 0x10 */
unsigned int sysstatus; /* 0x14 */
@@ -77,7 +77,7 @@ typedef struct hsmmc {
unsigned int ie; /* 0x134 */
unsigned char res4[0x8];
unsigned int capa; /* 0x140 */
-} hsmmc_t;
+};
/*
* OMAP HS MMC Bit definitions
@@ -182,13 +182,6 @@ typedef struct hsmmc {
#define CLK_400KHZ 1
#define CLK_MISC 2
-typedef struct {
- unsigned int card_type;
- unsigned int version;
- unsigned int mode;
- unsigned int size;
- unsigned int RCA;
-} mmc_card_data;
#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK)
#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
index 45c947d..c2a9b46 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -687,4 +687,27 @@ struct dpll_params {
s8 m7;
};
+extern struct omap4_prcm_regs *const prcm;
+extern const u32 sys_clk_array[8];
+
+void scale_vcores(void);
+void do_scale_tps62361(u32 reg, u32 volt_mv);
+u32 omap_ddr_clk(void);
+void do_scale_vcore(u32 vcore_reg, u32 volt_mv);
+void setup_sri2c(void);
+void setup_post_dividers(u32 *const base, const struct dpll_params *params);
+u32 get_sys_clk_index(void);
+void enable_basic_clocks(void);
+void enable_basic_uboot_clocks(void);
+void enable_non_essential_clocks(void);
+void do_enable_clocks(u32 *const *clk_domains,
+ u32 *const *clk_modules_hw_auto,
+ u32 *const *clk_modules_explicit_en,
+ u8 wait_for_enable);
+const struct dpll_params *get_mpu_dpll_params(void);
+const struct dpll_params *get_core_dpll_params(void);
+const struct dpll_params *get_per_dpll_params(void);
+const struct dpll_params *get_iva_dpll_params(void);
+const struct dpll_params *get_usb_dpll_params(void);
+const struct dpll_params *get_abe_dpll_params(void);
#endif /* _CLOCKS_OMAP4_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/emif.h b/arch/arm/include/asm/arch-omap4/emif.h
deleted file mode 100644
index 3a549ba..0000000
--- a/arch/arm/include/asm/arch-omap4/emif.h
+++ /dev/null
@@ -1,1021 +0,0 @@
-/*
- * OMAP44xx EMIF header
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Aneesh V <aneesh@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _EMIF_H_
-#define _EMIF_H_
-#include <asm/types.h>
-#include <common.h>
-
-/* Base address */
-#define OMAP44XX_EMIF1 0x4c000000
-#define OMAP44XX_EMIF2 0x4d000000
-
-/* Registers shifts and masks */
-
-/* EMIF_MOD_ID_REV */
-#define OMAP44XX_REG_SCHEME_SHIFT 30
-#define OMAP44XX_REG_SCHEME_MASK (0x3 << 30)
-#define OMAP44XX_REG_MODULE_ID_SHIFT 16
-#define OMAP44XX_REG_MODULE_ID_MASK (0xfff << 16)
-#define OMAP44XX_REG_RTL_VERSION_SHIFT 11
-#define OMAP44XX_REG_RTL_VERSION_MASK (0x1f << 11)
-#define OMAP44XX_REG_MAJOR_REVISION_SHIFT 8
-#define OMAP44XX_REG_MAJOR_REVISION_MASK (0x7 << 8)
-#define OMAP44XX_REG_MINOR_REVISION_SHIFT 0
-#define OMAP44XX_REG_MINOR_REVISION_MASK (0x3f << 0)
-
-/* STATUS */
-#define OMAP44XX_REG_BE_SHIFT 31
-#define OMAP44XX_REG_BE_MASK (1 << 31)
-#define OMAP44XX_REG_DUAL_CLK_MODE_SHIFT 30
-#define OMAP44XX_REG_DUAL_CLK_MODE_MASK (1 << 30)
-#define OMAP44XX_REG_FAST_INIT_SHIFT 29
-#define OMAP44XX_REG_FAST_INIT_MASK (1 << 29)
-#define OMAP44XX_REG_PHY_DLL_READY_SHIFT 2
-#define OMAP44XX_REG_PHY_DLL_READY_MASK (1 << 2)
-
-/* SDRAM_CONFIG */
-#define OMAP44XX_REG_SDRAM_TYPE_SHIFT 29
-#define OMAP44XX_REG_SDRAM_TYPE_MASK (0x7 << 29)
-#define OMAP44XX_REG_IBANK_POS_SHIFT 27
-#define OMAP44XX_REG_IBANK_POS_MASK (0x3 << 27)
-#define OMAP44XX_REG_DDR_TERM_SHIFT 24
-#define OMAP44XX_REG_DDR_TERM_MASK (0x7 << 24)
-#define OMAP44XX_REG_DDR2_DDQS_SHIFT 23
-#define OMAP44XX_REG_DDR2_DDQS_MASK (1 << 23)
-#define OMAP44XX_REG_DYN_ODT_SHIFT 21
-#define OMAP44XX_REG_DYN_ODT_MASK (0x3 << 21)
-#define OMAP44XX_REG_DDR_DISABLE_DLL_SHIFT 20
-#define OMAP44XX_REG_DDR_DISABLE_DLL_MASK (1 << 20)
-#define OMAP44XX_REG_SDRAM_DRIVE_SHIFT 18
-#define OMAP44XX_REG_SDRAM_DRIVE_MASK (0x3 << 18)
-#define OMAP44XX_REG_CWL_SHIFT 16
-#define OMAP44XX_REG_CWL_MASK (0x3 << 16)
-#define OMAP44XX_REG_NARROW_MODE_SHIFT 14
-#define OMAP44XX_REG_NARROW_MODE_MASK (0x3 << 14)
-#define OMAP44XX_REG_CL_SHIFT 10
-#define OMAP44XX_REG_CL_MASK (0xf << 10)
-#define OMAP44XX_REG_ROWSIZE_SHIFT 7
-#define OMAP44XX_REG_ROWSIZE_MASK (0x7 << 7)
-#define OMAP44XX_REG_IBANK_SHIFT 4
-#define OMAP44XX_REG_IBANK_MASK (0x7 << 4)
-#define OMAP44XX_REG_EBANK_SHIFT 3
-#define OMAP44XX_REG_EBANK_MASK (1 << 3)
-#define OMAP44XX_REG_PAGESIZE_SHIFT 0
-#define OMAP44XX_REG_PAGESIZE_MASK (0x7 << 0)
-
-/* SDRAM_CONFIG_2 */
-#define OMAP44XX_REG_CS1NVMEN_SHIFT 30
-#define OMAP44XX_REG_CS1NVMEN_MASK (1 << 30)
-#define OMAP44XX_REG_EBANK_POS_SHIFT 27
-#define OMAP44XX_REG_EBANK_POS_MASK (1 << 27)
-#define OMAP44XX_REG_RDBNUM_SHIFT 4
-#define OMAP44XX_REG_RDBNUM_MASK (0x3 << 4)
-#define OMAP44XX_REG_RDBSIZE_SHIFT 0
-#define OMAP44XX_REG_RDBSIZE_MASK (0x7 << 0)
-
-/* SDRAM_REF_CTRL */
-#define OMAP44XX_REG_INITREF_DIS_SHIFT 31
-#define OMAP44XX_REG_INITREF_DIS_MASK (1 << 31)
-#define OMAP44XX_REG_SRT_SHIFT 29
-#define OMAP44XX_REG_SRT_MASK (1 << 29)
-#define OMAP44XX_REG_ASR_SHIFT 28
-#define OMAP44XX_REG_ASR_MASK (1 << 28)
-#define OMAP44XX_REG_PASR_SHIFT 24
-#define OMAP44XX_REG_PASR_MASK (0x7 << 24)
-#define OMAP44XX_REG_REFRESH_RATE_SHIFT 0
-#define OMAP44XX_REG_REFRESH_RATE_MASK (0xffff << 0)
-
-/* SDRAM_REF_CTRL_SHDW */
-#define OMAP44XX_REG_REFRESH_RATE_SHDW_SHIFT 0
-#define OMAP44XX_REG_REFRESH_RATE_SHDW_MASK (0xffff << 0)
-
-/* SDRAM_TIM_1 */
-#define OMAP44XX_REG_T_RP_SHIFT 25
-#define OMAP44XX_REG_T_RP_MASK (0xf << 25)
-#define OMAP44XX_REG_T_RCD_SHIFT 21
-#define OMAP44XX_REG_T_RCD_MASK (0xf << 21)
-#define OMAP44XX_REG_T_WR_SHIFT 17
-#define OMAP44XX_REG_T_WR_MASK (0xf << 17)
-#define OMAP44XX_REG_T_RAS_SHIFT 12
-#define OMAP44XX_REG_T_RAS_MASK (0x1f << 12)
-#define OMAP44XX_REG_T_RC_SHIFT 6
-#define OMAP44XX_REG_T_RC_MASK (0x3f << 6)
-#define OMAP44XX_REG_T_RRD_SHIFT 3
-#define OMAP44XX_REG_T_RRD_MASK (0x7 << 3)
-#define OMAP44XX_REG_T_WTR_SHIFT 0
-#define OMAP44XX_REG_T_WTR_MASK (0x7 << 0)
-
-/* SDRAM_TIM_1_SHDW */
-#define OMAP44XX_REG_T_RP_SHDW_SHIFT 25
-#define OMAP44XX_REG_T_RP_SHDW_MASK (0xf << 25)
-#define OMAP44XX_REG_T_RCD_SHDW_SHIFT 21
-#define OMAP44XX_REG_T_RCD_SHDW_MASK (0xf << 21)
-#define OMAP44XX_REG_T_WR_SHDW_SHIFT 17
-#define OMAP44XX_REG_T_WR_SHDW_MASK (0xf << 17)
-#define OMAP44XX_REG_T_RAS_SHDW_SHIFT 12
-#define OMAP44XX_REG_T_RAS_SHDW_MASK (0x1f << 12)
-#define OMAP44XX_REG_T_RC_SHDW_SHIFT 6
-#define OMAP44XX_REG_T_RC_SHDW_MASK (0x3f << 6)
-#define OMAP44XX_REG_T_RRD_SHDW_SHIFT 3
-#define OMAP44XX_REG_T_RRD_SHDW_MASK (0x7 << 3)
-#define OMAP44XX_REG_T_WTR_SHDW_SHIFT 0
-#define OMAP44XX_REG_T_WTR_SHDW_MASK (0x7 << 0)
-
-/* SDRAM_TIM_2 */
-#define OMAP44XX_REG_T_XP_SHIFT 28
-#define OMAP44XX_REG_T_XP_MASK (0x7 << 28)
-#define OMAP44XX_REG_T_ODT_SHIFT 25
-#define OMAP44XX_REG_T_ODT_MASK (0x7 << 25)
-#define OMAP44XX_REG_T_XSNR_SHIFT 16
-#define OMAP44XX_REG_T_XSNR_MASK (0x1ff << 16)
-#define OMAP44XX_REG_T_XSRD_SHIFT 6
-#define OMAP44XX_REG_T_XSRD_MASK (0x3ff << 6)
-#define OMAP44XX_REG_T_RTP_SHIFT 3
-#define OMAP44XX_REG_T_RTP_MASK (0x7 << 3)
-#define OMAP44XX_REG_T_CKE_SHIFT 0
-#define OMAP44XX_REG_T_CKE_MASK (0x7 << 0)
-
-/* SDRAM_TIM_2_SHDW */
-#define OMAP44XX_REG_T_XP_SHDW_SHIFT 28
-#define OMAP44XX_REG_T_XP_SHDW_MASK (0x7 << 28)
-#define OMAP44XX_REG_T_ODT_SHDW_SHIFT 25
-#define OMAP44XX_REG_T_ODT_SHDW_MASK (0x7 << 25)
-#define OMAP44XX_REG_T_XSNR_SHDW_SHIFT 16
-#define OMAP44XX_REG_T_XSNR_SHDW_MASK (0x1ff << 16)
-#define OMAP44XX_REG_T_XSRD_SHDW_SHIFT 6
-#define OMAP44XX_REG_T_XSRD_SHDW_MASK (0x3ff << 6)
-#define OMAP44XX_REG_T_RTP_SHDW_SHIFT 3
-#define OMAP44XX_REG_T_RTP_SHDW_MASK (0x7 << 3)
-#define OMAP44XX_REG_T_CKE_SHDW_SHIFT 0
-#define OMAP44XX_REG_T_CKE_SHDW_MASK (0x7 << 0)
-
-/* SDRAM_TIM_3 */
-#define OMAP44XX_REG_T_CKESR_SHIFT 21
-#define OMAP44XX_REG_T_CKESR_MASK (0x7 << 21)
-#define OMAP44XX_REG_ZQ_ZQCS_SHIFT 15
-#define OMAP44XX_REG_ZQ_ZQCS_MASK (0x3f << 15)
-#define OMAP44XX_REG_T_TDQSCKMAX_SHIFT 13
-#define OMAP44XX_REG_T_TDQSCKMAX_MASK (0x3 << 13)
-#define OMAP44XX_REG_T_RFC_SHIFT 4
-#define OMAP44XX_REG_T_RFC_MASK (0x1ff << 4)
-#define OMAP44XX_REG_T_RAS_MAX_SHIFT 0
-#define OMAP44XX_REG_T_RAS_MAX_MASK (0xf << 0)
-
-/* SDRAM_TIM_3_SHDW */
-#define OMAP44XX_REG_T_CKESR_SHDW_SHIFT 21
-#define OMAP44XX_REG_T_CKESR_SHDW_MASK (0x7 << 21)
-#define OMAP44XX_REG_ZQ_ZQCS_SHDW_SHIFT 15
-#define OMAP44XX_REG_ZQ_ZQCS_SHDW_MASK (0x3f << 15)
-#define OMAP44XX_REG_T_TDQSCKMAX_SHDW_SHIFT 13
-#define OMAP44XX_REG_T_TDQSCKMAX_SHDW_MASK (0x3 << 13)
-#define OMAP44XX_REG_T_RFC_SHDW_SHIFT 4
-#define OMAP44XX_REG_T_RFC_SHDW_MASK (0x1ff << 4)
-#define OMAP44XX_REG_T_RAS_MAX_SHDW_SHIFT 0
-#define OMAP44XX_REG_T_RAS_MAX_SHDW_MASK (0xf << 0)
-
-/* LPDDR2_NVM_TIM */
-#define OMAP44XX_REG_NVM_T_XP_SHIFT 28
-#define OMAP44XX_REG_NVM_T_XP_MASK (0x7 << 28)
-#define OMAP44XX_REG_NVM_T_WTR_SHIFT 24
-#define OMAP44XX_REG_NVM_T_WTR_MASK (0x7 << 24)
-#define OMAP44XX_REG_NVM_T_RP_SHIFT 20
-#define OMAP44XX_REG_NVM_T_RP_MASK (0xf << 20)
-#define OMAP44XX_REG_NVM_T_WRA_SHIFT 16
-#define OMAP44XX_REG_NVM_T_WRA_MASK (0xf << 16)
-#define OMAP44XX_REG_NVM_T_RRD_SHIFT 8
-#define OMAP44XX_REG_NVM_T_RRD_MASK (0xff << 8)
-#define OMAP44XX_REG_NVM_T_RCDMIN_SHIFT 0
-#define OMAP44XX_REG_NVM_T_RCDMIN_MASK (0xff << 0)
-
-/* LPDDR2_NVM_TIM_SHDW */
-#define OMAP44XX_REG_NVM_T_XP_SHDW_SHIFT 28
-#define OMAP44XX_REG_NVM_T_XP_SHDW_MASK (0x7 << 28)
-#define OMAP44XX_REG_NVM_T_WTR_SHDW_SHIFT 24
-#define OMAP44XX_REG_NVM_T_WTR_SHDW_MASK (0x7 << 24)
-#define OMAP44XX_REG_NVM_T_RP_SHDW_SHIFT 20
-#define OMAP44XX_REG_NVM_T_RP_SHDW_MASK (0xf << 20)
-#define OMAP44XX_REG_NVM_T_WRA_SHDW_SHIFT 16
-#define OMAP44XX_REG_NVM_T_WRA_SHDW_MASK (0xf << 16)
-#define OMAP44XX_REG_NVM_T_RRD_SHDW_SHIFT 8
-#define OMAP44XX_REG_NVM_T_RRD_SHDW_MASK (0xff << 8)
-#define OMAP44XX_REG_NVM_T_RCDMIN_SHDW_SHIFT 0
-#define OMAP44XX_REG_NVM_T_RCDMIN_SHDW_MASK (0xff << 0)
-
-/* PWR_MGMT_CTRL */
-#define OMAP44XX_REG_IDLEMODE_SHIFT 30
-#define OMAP44XX_REG_IDLEMODE_MASK (0x3 << 30)
-#define OMAP44XX_REG_PD_TIM_SHIFT 12
-#define OMAP44XX_REG_PD_TIM_MASK (0xf << 12)
-#define OMAP44XX_REG_DPD_EN_SHIFT 11
-#define OMAP44XX_REG_DPD_EN_MASK (1 << 11)
-#define OMAP44XX_REG_LP_MODE_SHIFT 8
-#define OMAP44XX_REG_LP_MODE_MASK (0x7 << 8)
-#define OMAP44XX_REG_SR_TIM_SHIFT 4
-#define OMAP44XX_REG_SR_TIM_MASK (0xf << 4)
-#define OMAP44XX_REG_CS_TIM_SHIFT 0
-#define OMAP44XX_REG_CS_TIM_MASK (0xf << 0)
-
-/* PWR_MGMT_CTRL_SHDW */
-#define OMAP44XX_REG_PD_TIM_SHDW_SHIFT 8
-#define OMAP44XX_REG_PD_TIM_SHDW_MASK (0xf << 8)
-#define OMAP44XX_REG_SR_TIM_SHDW_SHIFT 4
-#define OMAP44XX_REG_SR_TIM_SHDW_MASK (0xf << 4)
-#define OMAP44XX_REG_CS_TIM_SHDW_SHIFT 0
-#define OMAP44XX_REG_CS_TIM_SHDW_MASK (0xf << 0)
-
-/* LPDDR2_MODE_REG_DATA */
-#define OMAP44XX_REG_VALUE_0_SHIFT 0
-#define OMAP44XX_REG_VALUE_0_MASK (0x7f << 0)
-
-/* LPDDR2_MODE_REG_CFG */
-#define OMAP44XX_REG_CS_SHIFT 31
-#define OMAP44XX_REG_CS_MASK (1 << 31)
-#define OMAP44XX_REG_REFRESH_EN_SHIFT 30
-#define OMAP44XX_REG_REFRESH_EN_MASK (1 << 30)
-#define OMAP44XX_REG_ADDRESS_SHIFT 0
-#define OMAP44XX_REG_ADDRESS_MASK (0xff << 0)
-
-/* OCP_CONFIG */
-#define OMAP44XX_REG_SYS_THRESH_MAX_SHIFT 24
-#define OMAP44XX_REG_SYS_THRESH_MAX_MASK (0xf << 24)
-#define OMAP44XX_REG_MPU_THRESH_MAX_SHIFT 20
-#define OMAP44XX_REG_MPU_THRESH_MAX_MASK (0xf << 20)
-#define OMAP44XX_REG_LL_THRESH_MAX_SHIFT 16
-#define OMAP44XX_REG_LL_THRESH_MAX_MASK (0xf << 16)
-#define OMAP44XX_REG_PR_OLD_COUNT_SHIFT 0
-#define OMAP44XX_REG_PR_OLD_COUNT_MASK (0xff << 0)
-
-/* OCP_CFG_VAL_1 */
-#define OMAP44XX_REG_SYS_BUS_WIDTH_SHIFT 30
-#define OMAP44XX_REG_SYS_BUS_WIDTH_MASK (0x3 << 30)
-#define OMAP44XX_REG_LL_BUS_WIDTH_SHIFT 28
-#define OMAP44XX_REG_LL_BUS_WIDTH_MASK (0x3 << 28)
-#define OMAP44XX_REG_WR_FIFO_DEPTH_SHIFT 8
-#define OMAP44XX_REG_WR_FIFO_DEPTH_MASK (0xff << 8)
-#define OMAP44XX_REG_CMD_FIFO_DEPTH_SHIFT 0
-#define OMAP44XX_REG_CMD_FIFO_DEPTH_MASK (0xff << 0)
-
-/* OCP_CFG_VAL_2 */
-#define OMAP44XX_REG_RREG_FIFO_DEPTH_SHIFT 16
-#define OMAP44XX_REG_RREG_FIFO_DEPTH_MASK (0xff << 16)
-#define OMAP44XX_REG_RSD_FIFO_DEPTH_SHIFT 8
-#define OMAP44XX_REG_RSD_FIFO_DEPTH_MASK (0xff << 8)
-#define OMAP44XX_REG_RCMD_FIFO_DEPTH_SHIFT 0
-#define OMAP44XX_REG_RCMD_FIFO_DEPTH_MASK (0xff << 0)
-
-/* IODFT_TLGC */
-#define OMAP44XX_REG_TLEC_SHIFT 16
-#define OMAP44XX_REG_TLEC_MASK (0xffff << 16)
-#define OMAP44XX_REG_MT_SHIFT 14
-#define OMAP44XX_REG_MT_MASK (1 << 14)
-#define OMAP44XX_REG_ACT_CAP_EN_SHIFT 13
-#define OMAP44XX_REG_ACT_CAP_EN_MASK (1 << 13)
-#define OMAP44XX_REG_OPG_LD_SHIFT 12
-#define OMAP44XX_REG_OPG_LD_MASK (1 << 12)
-#define OMAP44XX_REG_RESET_PHY_SHIFT 10
-#define OMAP44XX_REG_RESET_PHY_MASK (1 << 10)
-#define OMAP44XX_REG_MMS_SHIFT 8
-#define OMAP44XX_REG_MMS_MASK (1 << 8)
-#define OMAP44XX_REG_MC_SHIFT 4
-#define OMAP44XX_REG_MC_MASK (0x3 << 4)
-#define OMAP44XX_REG_PC_SHIFT 1
-#define OMAP44XX_REG_PC_MASK (0x7 << 1)
-#define OMAP44XX_REG_TM_SHIFT 0
-#define OMAP44XX_REG_TM_MASK (1 << 0)
-
-/* IODFT_CTRL_MISR_RSLT */
-#define OMAP44XX_REG_DQM_TLMR_SHIFT 16
-#define OMAP44XX_REG_DQM_TLMR_MASK (0x3ff << 16)
-#define OMAP44XX_REG_CTL_TLMR_SHIFT 0
-#define OMAP44XX_REG_CTL_TLMR_MASK (0x7ff << 0)
-
-/* IODFT_ADDR_MISR_RSLT */
-#define OMAP44XX_REG_ADDR_TLMR_SHIFT 0
-#define OMAP44XX_REG_ADDR_TLMR_MASK (0x1fffff << 0)
-
-/* IODFT_DATA_MISR_RSLT_1 */
-#define OMAP44XX_REG_DATA_TLMR_31_0_SHIFT 0
-#define OMAP44XX_REG_DATA_TLMR_31_0_MASK (0xffffffff << 0)
-
-/* IODFT_DATA_MISR_RSLT_2 */
-#define OMAP44XX_REG_DATA_TLMR_63_32_SHIFT 0
-#define OMAP44XX_REG_DATA_TLMR_63_32_MASK (0xffffffff << 0)
-
-/* IODFT_DATA_MISR_RSLT_3 */
-#define OMAP44XX_REG_DATA_TLMR_66_64_SHIFT 0
-#define OMAP44XX_REG_DATA_TLMR_66_64_MASK (0x7 << 0)
-
-/* PERF_CNT_1 */
-#define OMAP44XX_REG_COUNTER1_SHIFT 0
-#define OMAP44XX_REG_COUNTER1_MASK (0xffffffff << 0)
-
-/* PERF_CNT_2 */
-#define OMAP44XX_REG_COUNTER2_SHIFT 0
-#define OMAP44XX_REG_COUNTER2_MASK (0xffffffff << 0)
-
-/* PERF_CNT_CFG */
-#define OMAP44XX_REG_CNTR2_MCONNID_EN_SHIFT 31
-#define OMAP44XX_REG_CNTR2_MCONNID_EN_MASK (1 << 31)
-#define OMAP44XX_REG_CNTR2_REGION_EN_SHIFT 30
-#define OMAP44XX_REG_CNTR2_REGION_EN_MASK (1 << 30)
-#define OMAP44XX_REG_CNTR2_CFG_SHIFT 16
-#define OMAP44XX_REG_CNTR2_CFG_MASK (0xf << 16)
-#define OMAP44XX_REG_CNTR1_MCONNID_EN_SHIFT 15
-#define OMAP44XX_REG_CNTR1_MCONNID_EN_MASK (1 << 15)
-#define OMAP44XX_REG_CNTR1_REGION_EN_SHIFT 14
-#define OMAP44XX_REG_CNTR1_REGION_EN_MASK (1 << 14)
-#define OMAP44XX_REG_CNTR1_CFG_SHIFT 0
-#define OMAP44XX_REG_CNTR1_CFG_MASK (0xf << 0)
-
-/* PERF_CNT_SEL */
-#define OMAP44XX_REG_MCONNID2_SHIFT 24
-#define OMAP44XX_REG_MCONNID2_MASK (0xff << 24)
-#define OMAP44XX_REG_REGION_SEL2_SHIFT 16
-#define OMAP44XX_REG_REGION_SEL2_MASK (0x3 << 16)
-#define OMAP44XX_REG_MCONNID1_SHIFT 8
-#define OMAP44XX_REG_MCONNID1_MASK (0xff << 8)
-#define OMAP44XX_REG_REGION_SEL1_SHIFT 0
-#define OMAP44XX_REG_REGION_SEL1_MASK (0x3 << 0)
-
-/* PERF_CNT_TIM */
-#define OMAP44XX_REG_TOTAL_TIME_SHIFT 0
-#define OMAP44XX_REG_TOTAL_TIME_MASK (0xffffffff << 0)
-
-/* READ_IDLE_CTRL */
-#define OMAP44XX_REG_READ_IDLE_LEN_SHIFT 16
-#define OMAP44XX_REG_READ_IDLE_LEN_MASK (0xf << 16)
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHIFT 0
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_MASK (0x1ff << 0)
-
-/* READ_IDLE_CTRL_SHDW */
-#define OMAP44XX_REG_READ_IDLE_LEN_SHDW_SHIFT 16
-#define OMAP44XX_REG_READ_IDLE_LEN_SHDW_MASK (0xf << 16)
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHDW_SHIFT 0
-#define OMAP44XX_REG_READ_IDLE_INTERVAL_SHDW_MASK (0x1ff << 0)
-
-/* IRQ_EOI */
-#define OMAP44XX_REG_EOI_SHIFT 0
-#define OMAP44XX_REG_EOI_MASK (1 << 0)
-
-/* IRQSTATUS_RAW_SYS */
-#define OMAP44XX_REG_DNV_SYS_SHIFT 2
-#define OMAP44XX_REG_DNV_SYS_MASK (1 << 2)
-#define OMAP44XX_REG_TA_SYS_SHIFT 1
-#define OMAP44XX_REG_TA_SYS_MASK (1 << 1)
-#define OMAP44XX_REG_ERR_SYS_SHIFT 0
-#define OMAP44XX_REG_ERR_SYS_MASK (1 << 0)
-
-/* IRQSTATUS_RAW_LL */
-#define OMAP44XX_REG_DNV_LL_SHIFT 2
-#define OMAP44XX_REG_DNV_LL_MASK (1 << 2)
-#define OMAP44XX_REG_TA_LL_SHIFT 1
-#define OMAP44XX_REG_TA_LL_MASK (1 << 1)
-#define OMAP44XX_REG_ERR_LL_SHIFT 0
-#define OMAP44XX_REG_ERR_LL_MASK (1 << 0)
-
-/* IRQSTATUS_SYS */
-
-/* IRQSTATUS_LL */
-
-/* IRQENABLE_SET_SYS */
-#define OMAP44XX_REG_EN_DNV_SYS_SHIFT 2
-#define OMAP44XX_REG_EN_DNV_SYS_MASK (1 << 2)
-#define OMAP44XX_REG_EN_TA_SYS_SHIFT 1
-#define OMAP44XX_REG_EN_TA_SYS_MASK (1 << 1)
-#define OMAP44XX_REG_EN_ERR_SYS_SHIFT 0
-#define OMAP44XX_REG_EN_ERR_SYS_MASK (1 << 0)
-
-/* IRQENABLE_SET_LL */
-#define OMAP44XX_REG_EN_DNV_LL_SHIFT 2
-#define OMAP44XX_REG_EN_DNV_LL_MASK (1 << 2)
-#define OMAP44XX_REG_EN_TA_LL_SHIFT 1
-#define OMAP44XX_REG_EN_TA_LL_MASK (1 << 1)
-#define OMAP44XX_REG_EN_ERR_LL_SHIFT 0
-#define OMAP44XX_REG_EN_ERR_LL_MASK (1 << 0)
-
-/* IRQENABLE_CLR_SYS */
-
-/* IRQENABLE_CLR_LL */
-
-/* ZQ_CONFIG */
-#define OMAP44XX_REG_ZQ_CS1EN_SHIFT 31
-#define OMAP44XX_REG_ZQ_CS1EN_MASK (1 << 31)
-#define OMAP44XX_REG_ZQ_CS0EN_SHIFT 30
-#define OMAP44XX_REG_ZQ_CS0EN_MASK (1 << 30)
-#define OMAP44XX_REG_ZQ_DUALCALEN_SHIFT 29
-#define OMAP44XX_REG_ZQ_DUALCALEN_MASK (1 << 29)
-#define OMAP44XX_REG_ZQ_SFEXITEN_SHIFT 28
-#define OMAP44XX_REG_ZQ_SFEXITEN_MASK (1 << 28)
-#define OMAP44XX_REG_ZQ_ZQINIT_MULT_SHIFT 18
-#define OMAP44XX_REG_ZQ_ZQINIT_MULT_MASK (0x3 << 18)
-#define OMAP44XX_REG_ZQ_ZQCL_MULT_SHIFT 16
-#define OMAP44XX_REG_ZQ_ZQCL_MULT_MASK (0x3 << 16)
-#define OMAP44XX_REG_ZQ_REFINTERVAL_SHIFT 0
-#define OMAP44XX_REG_ZQ_REFINTERVAL_MASK (0xffff << 0)
-
-/* TEMP_ALERT_CONFIG */
-#define OMAP44XX_REG_TA_CS1EN_SHIFT 31
-#define OMAP44XX_REG_TA_CS1EN_MASK (1 << 31)
-#define OMAP44XX_REG_TA_CS0EN_SHIFT 30
-#define OMAP44XX_REG_TA_CS0EN_MASK (1 << 30)
-#define OMAP44XX_REG_TA_SFEXITEN_SHIFT 28
-#define OMAP44XX_REG_TA_SFEXITEN_MASK (1 << 28)
-#define OMAP44XX_REG_TA_DEVWDT_SHIFT 26
-#define OMAP44XX_REG_TA_DEVWDT_MASK (0x3 << 26)
-#define OMAP44XX_REG_TA_DEVCNT_SHIFT 24
-#define OMAP44XX_REG_TA_DEVCNT_MASK (0x3 << 24)
-#define OMAP44XX_REG_TA_REFINTERVAL_SHIFT 0
-#define OMAP44XX_REG_TA_REFINTERVAL_MASK (0x3fffff << 0)
-
-/* OCP_ERR_LOG */
-#define OMAP44XX_REG_MADDRSPACE_SHIFT 14
-#define OMAP44XX_REG_MADDRSPACE_MASK (0x3 << 14)
-#define OMAP44XX_REG_MBURSTSEQ_SHIFT 11
-#define OMAP44XX_REG_MBURSTSEQ_MASK (0x7 << 11)
-#define OMAP44XX_REG_MCMD_SHIFT 8
-#define OMAP44XX_REG_MCMD_MASK (0x7 << 8)
-#define OMAP44XX_REG_MCONNID_SHIFT 0
-#define OMAP44XX_REG_MCONNID_MASK (0xff << 0)
-
-/* DDR_PHY_CTRL_1 */
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHIFT 4
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_MASK (0xfffffff << 4)
-#define OMAP44XX_REG_READ_LATENCY_SHIFT 0
-#define OMAP44XX_REG_READ_LATENCY_MASK (0xf << 0)
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHIFT 4
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_MASK (0xFF << 4)
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT 12
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_MASK (0xFFFFF << 12)
-
-/* DDR_PHY_CTRL_1_SHDW */
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHDW_SHIFT 4
-#define OMAP44XX_REG_DDR_PHY_CTRL_1_SHDW_MASK (0xfffffff << 4)
-#define OMAP44XX_REG_READ_LATENCY_SHDW_SHIFT 0
-#define OMAP44XX_REG_READ_LATENCY_SHDW_MASK (0xf << 0)
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHDW_SHIFT 4
-#define OMAP44XX_REG_DLL_SLAVE_DLY_CTRL_SHDW_MASK (0xFF << 4)
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_SHIFT 12
-#define OMAP44XX_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_MASK (0xFFFFF << 12)
-
-/* DDR_PHY_CTRL_2 */
-#define OMAP44XX_REG_DDR_PHY_CTRL_2_SHIFT 0
-#define OMAP44XX_REG_DDR_PHY_CTRL_2_MASK (0xffffffff << 0)
-
-/* DMM */
-#define OMAP44XX_DMM_LISA_MAP_BASE 0x4E000040
-
-/* Memory Adapter (4460 onwards) */
-#define OMAP44XX_MA_LISA_MAP_BASE 0x482AF040
-
-/* DMM_LISA_MAP */
-#define OMAP44XX_SYS_ADDR_SHIFT 24
-#define OMAP44XX_SYS_ADDR_MASK (0xff << 24)
-#define OMAP44XX_SYS_SIZE_SHIFT 20
-#define OMAP44XX_SYS_SIZE_MASK (0x7 << 20)
-#define OMAP44XX_SDRC_INTL_SHIFT 18
-#define OMAP44XX_SDRC_INTL_MASK (0x3 << 18)
-#define OMAP44XX_SDRC_ADDRSPC_SHIFT 16
-#define OMAP44XX_SDRC_ADDRSPC_MASK (0x3 << 16)
-#define OMAP44XX_SDRC_MAP_SHIFT 8
-#define OMAP44XX_SDRC_MAP_MASK (0x3 << 8)
-#define OMAP44XX_SDRC_ADDR_SHIFT 0
-#define OMAP44XX_SDRC_ADDR_MASK (0xff << 0)
-
-/* DMM_LISA_MAP fields */
-#define DMM_SDRC_MAP_UNMAPPED 0
-#define DMM_SDRC_MAP_EMIF1_ONLY 1
-#define DMM_SDRC_MAP_EMIF2_ONLY 2
-#define DMM_SDRC_MAP_EMIF1_AND_EMIF2 3
-
-#define DMM_SDRC_INTL_NONE 0
-#define DMM_SDRC_INTL_128B 1
-#define DMM_SDRC_INTL_256B 2
-#define DMM_SDRC_INTL_512 3
-
-#define DMM_SDRC_ADDR_SPC_SDRAM 0
-#define DMM_SDRC_ADDR_SPC_NVM 1
-#define DMM_SDRC_ADDR_SPC_INVALID 2
-
-#define DMM_LISA_MAP_INTERLEAVED_BASE_VAL (\
- (DMM_SDRC_MAP_EMIF1_AND_EMIF2 << OMAP44XX_SDRC_MAP_SHIFT) |\
- (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT) |\
- (DMM_SDRC_INTL_128B << OMAP44XX_SDRC_INTL_SHIFT) |\
- (CONFIG_SYS_SDRAM_BASE << OMAP44XX_SYS_ADDR_SHIFT))
-
-#define DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL (\
- (DMM_SDRC_MAP_EMIF1_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
- (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
- (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT))
-
-#define DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL (\
- (DMM_SDRC_MAP_EMIF2_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
- (DMM_SDRC_ADDR_SPC_SDRAM << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
- (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT))
-
-/* Trap for invalid TILER PAT entries */
-#define DMM_LISA_MAP_0_INVAL_ADDR_TRAP (\
- (0 << OMAP44XX_SDRC_ADDR_SHIFT) |\
- (DMM_SDRC_MAP_EMIF1_ONLY << OMAP44XX_SDRC_MAP_SHIFT)|\
- (DMM_SDRC_ADDR_SPC_INVALID << OMAP44XX_SDRC_ADDRSPC_SHIFT)|\
- (DMM_SDRC_INTL_NONE << OMAP44XX_SDRC_INTL_SHIFT)|\
- (0xFF << OMAP44XX_SYS_ADDR_SHIFT))
-
-
-/* Reg mapping structure */
-struct emif_reg_struct {
- u32 emif_mod_id_rev;
- u32 emif_status;
- u32 emif_sdram_config;
- u32 emif_lpddr2_nvm_config;
- u32 emif_sdram_ref_ctrl;
- u32 emif_sdram_ref_ctrl_shdw;
- u32 emif_sdram_tim_1;
- u32 emif_sdram_tim_1_shdw;
- u32 emif_sdram_tim_2;
- u32 emif_sdram_tim_2_shdw;
- u32 emif_sdram_tim_3;
- u32 emif_sdram_tim_3_shdw;
- u32 emif_lpddr2_nvm_tim;
- u32 emif_lpddr2_nvm_tim_shdw;
- u32 emif_pwr_mgmt_ctrl;
- u32 emif_pwr_mgmt_ctrl_shdw;
- u32 emif_lpddr2_mode_reg_data;
- u32 padding1[1];
- u32 emif_lpddr2_mode_reg_data_es2;
- u32 padding11[1];
- u32 emif_lpddr2_mode_reg_cfg;
- u32 emif_l3_config;
- u32 emif_l3_cfg_val_1;
- u32 emif_l3_cfg_val_2;
- u32 emif_iodft_tlgc;
- u32 padding2[7];
- u32 emif_perf_cnt_1;
- u32 emif_perf_cnt_2;
- u32 emif_perf_cnt_cfg;
- u32 emif_perf_cnt_sel;
- u32 emif_perf_cnt_tim;
- u32 padding3;
- u32 emif_read_idlectrl;
- u32 emif_read_idlectrl_shdw;
- u32 padding4;
- u32 emif_irqstatus_raw_sys;
- u32 emif_irqstatus_raw_ll;
- u32 emif_irqstatus_sys;
- u32 emif_irqstatus_ll;
- u32 emif_irqenable_set_sys;
- u32 emif_irqenable_set_ll;
- u32 emif_irqenable_clr_sys;
- u32 emif_irqenable_clr_ll;
- u32 padding5;
- u32 emif_zq_config;
- u32 emif_temp_alert_config;
- u32 emif_l3_err_log;
- u32 padding6[4];
- u32 emif_ddr_phy_ctrl_1;
- u32 emif_ddr_phy_ctrl_1_shdw;
- u32 emif_ddr_phy_ctrl_2;
-};
-
-struct dmm_lisa_map_regs {
- u32 dmm_lisa_map_0;
- u32 dmm_lisa_map_1;
- u32 dmm_lisa_map_2;
- u32 dmm_lisa_map_3;
-};
-
-#define CS0 0
-#define CS1 1
-/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/
-#define MAX_LPDDR2_FREQ 400000000 /* 400 MHz */
-
-/*
- * The period of DDR clk is represented as numerator and denominator for
- * better accuracy in integer based calculations. However, if the numerator
- * and denominator are very huge there may be chances of overflow in
- * calculations. So, as a trade-off keep denominator(and consequently
- * numerator) within a limit sacrificing some accuracy - but not much
- * If denominator and numerator are already small (such as at 400 MHz)
- * no adjustment is needed
- */
-#define EMIF_PERIOD_DEN_LIMIT 1000
-/*
- * Maximum number of different frequencies supported by EMIF driver
- * Determines the number of entries in the pointer array for register
- * cache
- */
-#define EMIF_MAX_NUM_FREQUENCIES 6
-/*
- * Indices into the Addressing Table array.
- * One entry each for all the different types of devices with different
- * addressing schemes
- */
-#define ADDR_TABLE_INDEX64M 0
-#define ADDR_TABLE_INDEX128M 1
-#define ADDR_TABLE_INDEX256M 2
-#define ADDR_TABLE_INDEX512M 3
-#define ADDR_TABLE_INDEX1GS4 4
-#define ADDR_TABLE_INDEX2GS4 5
-#define ADDR_TABLE_INDEX4G 6
-#define ADDR_TABLE_INDEX8G 7
-#define ADDR_TABLE_INDEX1GS2 8
-#define ADDR_TABLE_INDEX2GS2 9
-#define ADDR_TABLE_INDEXMAX 10
-
-/* Number of Row bits */
-#define ROW_9 0
-#define ROW_10 1
-#define ROW_11 2
-#define ROW_12 3
-#define ROW_13 4
-#define ROW_14 5
-#define ROW_15 6
-#define ROW_16 7
-
-/* Number of Column bits */
-#define COL_8 0
-#define COL_9 1
-#define COL_10 2
-#define COL_11 3
-#define COL_7 4 /*Not supported by OMAP included for completeness */
-
-/* Number of Banks*/
-#define BANKS1 0
-#define BANKS2 1
-#define BANKS4 2
-#define BANKS8 3
-
-/* Refresh rate in micro seconds x 10 */
-#define T_REFI_15_6 156
-#define T_REFI_7_8 78
-#define T_REFI_3_9 39
-
-#define EBANK_CS1_DIS 0
-#define EBANK_CS1_EN 1
-
-/* Read Latency used by the device at reset */
-#define RL_BOOT 3
-/* Read Latency for the highest frequency you want to use */
-#define RL_FINAL 6
-
-/* Interleaving policies at EMIF level- between banks and Chip Selects */
-#define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING 0
-#define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING 3
-
-/*
- * Interleaving policy to be used
- * Currently set to MAX interleaving for better performance
- */
-#define EMIF_INTERLEAVING_POLICY EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING
-
-/* State of the core voltage:
- * This is important for some parameters such as read idle control and
- * ZQ calibration timings. Timings are much stricter when voltage ramp
- * is happening compared to when the voltage is stable.
- * We need to calculate two sets of values for these parameters and use
- * them accordingly
- */
-#define LPDDR2_VOLTAGE_STABLE 0
-#define LPDDR2_VOLTAGE_RAMPING 1
-
-/* Length of the forced read idle period in terms of cycles */
-#define EMIF_REG_READ_IDLE_LEN_VAL 5
-
-/* Interval between forced 'read idles' */
-/* To be used when voltage is changed for DPS/DVFS - 1us */
-#define READ_IDLE_INTERVAL_DVFS (1*1000)
-/*
- * To be used when voltage is not scaled except by Smart Reflex
- * 50us - or maximum value will do
- */
-#define READ_IDLE_INTERVAL_NORMAL (50*1000)
-
-
-/*
- * Unless voltage is changing due to DVFS one ZQCS command every 50ms should
- * be enough. This shoule be enough also in the case when voltage is changing
- * due to smart-reflex.
- */
-#define EMIF_ZQCS_INTERVAL_NORMAL_IN_US (50*1000)
-/*
- * If voltage is changing due to DVFS ZQCS should be performed more
- * often(every 50us)
- */
-#define EMIF_ZQCS_INTERVAL_DVFS_IN_US 50
-
-/* The interval between ZQCL commands as a multiple of ZQCS interval */
-#define REG_ZQ_ZQCL_MULT 4
-/* The interval between ZQINIT commands as a multiple of ZQCL interval */
-#define REG_ZQ_ZQINIT_MULT 3
-/* Enable ZQ Calibration on exiting Self-refresh */
-#define REG_ZQ_SFEXITEN_ENABLE 1
-/*
- * ZQ Calibration simultaneously on both chip-selects:
- * Needs one calibration resistor per CS
- * None of the boards that we know of have this capability
- * So disabled by default
- */
-#define REG_ZQ_DUALCALEN_DISABLE 0
-/*
- * Enable ZQ Calibration by default on CS0. If we are asked to program
- * the EMIF there will be something connected to CS0 for sure
- */
-#define REG_ZQ_CS0EN_ENABLE 1
-
-/* EMIF_PWR_MGMT_CTRL register */
-/* Low power modes */
-#define LP_MODE_DISABLE 0
-#define LP_MODE_CLOCK_STOP 1
-#define LP_MODE_SELF_REFRESH 2
-#define LP_MODE_PWR_DN 3
-
-/* REG_DPD_EN */
-#define DPD_DISABLE 0
-#define DPD_ENABLE 1
-
-/* Maximum delay before Low Power Modes */
-#define REG_CS_TIM 0xF
-#define REG_SR_TIM 0xF
-#define REG_PD_TIM 0xF
-
-/* EMIF_PWR_MGMT_CTRL register */
-#define EMIF_PWR_MGMT_CTRL (\
- ((REG_CS_TIM << OMAP44XX_REG_CS_TIM_SHIFT) & OMAP44XX_REG_CS_TIM_MASK)|\
- ((REG_SR_TIM << OMAP44XX_REG_SR_TIM_SHIFT) & OMAP44XX_REG_SR_TIM_MASK)|\
- ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHIFT) & OMAP44XX_REG_PD_TIM_MASK)|\
- ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHIFT) & OMAP44XX_REG_PD_TIM_MASK)|\
- ((LP_MODE_DISABLE << OMAP44XX_REG_LP_MODE_SHIFT)\
- & OMAP44XX_REG_LP_MODE_MASK) |\
- ((DPD_DISABLE << OMAP44XX_REG_DPD_EN_SHIFT)\
- & OMAP44XX_REG_DPD_EN_MASK))\
-
-#define EMIF_PWR_MGMT_CTRL_SHDW (\
- ((REG_CS_TIM << OMAP44XX_REG_CS_TIM_SHDW_SHIFT)\
- & OMAP44XX_REG_CS_TIM_SHDW_MASK) |\
- ((REG_SR_TIM << OMAP44XX_REG_SR_TIM_SHDW_SHIFT)\
- & OMAP44XX_REG_SR_TIM_SHDW_MASK) |\
- ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\
- & OMAP44XX_REG_PD_TIM_SHDW_MASK) |\
- ((REG_PD_TIM << OMAP44XX_REG_PD_TIM_SHDW_SHIFT)\
- & OMAP44XX_REG_PD_TIM_SHDW_MASK))
-
-/* EMIF_L3_CONFIG register value */
-#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0 0x0A0000FF
-#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0 0x0A300000
-/*
- * Value of bits 12:31 of DDR_PHY_CTRL_1 register:
- * All these fields have magic values dependent on frequency and
- * determined by PHY and DLL integration with EMIF. Setting the magic
- * values suggested by hw team.
- */
-#define EMIF_DDR_PHY_CTRL_1_BASE_VAL 0x049FF
-#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ 0x41
-#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ 0x80
-#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS 0xFF
-
-/*
-* MR1 value:
-* Burst length : 8
-* Burst type : sequential
-* Wrap : enabled
-* nWR : 3(default). EMIF does not do pre-charge.
-* : So nWR is don't care
-*/
-#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3 0x23
-
-/* MR2 */
-#define MR2_RL3_WL1 1
-#define MR2_RL4_WL2 2
-#define MR2_RL5_WL2 3
-#define MR2_RL6_WL3 4
-
-/* MR10: ZQ calibration codes */
-#define MR10_ZQ_ZQCS 0x56
-#define MR10_ZQ_ZQCL 0xAB
-#define MR10_ZQ_ZQINIT 0xFF
-#define MR10_ZQ_ZQRESET 0xC3
-
-/* TEMP_ALERT_CONFIG */
-#define TEMP_ALERT_POLL_INTERVAL_MS 360 /* for temp gradient - 5 C/s */
-#define TEMP_ALERT_CONFIG_DEVCT_1 0
-#define TEMP_ALERT_CONFIG_DEVWDT_32 2
-
-/* MR16 value: refresh full array(no partial array self refresh) */
-#define MR16_REF_FULL_ARRAY 0
-
-/*
- * Maximum number of entries we keep in our array of timing tables
- * We need not keep all the speed bins supported by the device
- * We need to keep timing tables for only the speed bins that we
- * are interested in
- */
-#define MAX_NUM_SPEEDBINS 4
-
-/* LPDDR2 Densities */
-#define LPDDR2_DENSITY_64Mb 0
-#define LPDDR2_DENSITY_128Mb 1
-#define LPDDR2_DENSITY_256Mb 2
-#define LPDDR2_DENSITY_512Mb 3
-#define LPDDR2_DENSITY_1Gb 4
-#define LPDDR2_DENSITY_2Gb 5
-#define LPDDR2_DENSITY_4Gb 6
-#define LPDDR2_DENSITY_8Gb 7
-#define LPDDR2_DENSITY_16Gb 8
-#define LPDDR2_DENSITY_32Gb 9
-
-/* LPDDR2 type */
-#define LPDDR2_TYPE_S4 0
-#define LPDDR2_TYPE_S2 1
-#define LPDDR2_TYPE_NVM 2
-
-/* LPDDR2 IO width */
-#define LPDDR2_IO_WIDTH_32 0
-#define LPDDR2_IO_WIDTH_16 1
-#define LPDDR2_IO_WIDTH_8 2
-
-/* Mode register numbers */
-#define LPDDR2_MR0 0
-#define LPDDR2_MR1 1
-#define LPDDR2_MR2 2
-#define LPDDR2_MR3 3
-#define LPDDR2_MR4 4
-#define LPDDR2_MR5 5
-#define LPDDR2_MR6 6
-#define LPDDR2_MR7 7
-#define LPDDR2_MR8 8
-#define LPDDR2_MR9 9
-#define LPDDR2_MR10 10
-#define LPDDR2_MR11 11
-#define LPDDR2_MR16 16
-#define LPDDR2_MR17 17
-#define LPDDR2_MR18 18
-
-/* MR0 */
-#define LPDDR2_MR0_DAI_SHIFT 0
-#define LPDDR2_MR0_DAI_MASK 1
-#define LPDDR2_MR0_DI_SHIFT 1
-#define LPDDR2_MR0_DI_MASK (1 << 1)
-#define LPDDR2_MR0_DNVI_SHIFT 2
-#define LPDDR2_MR0_DNVI_MASK (1 << 2)
-
-/* MR4 */
-#define MR4_SDRAM_REF_RATE_SHIFT 0
-#define MR4_SDRAM_REF_RATE_MASK 7
-#define MR4_TUF_SHIFT 7
-#define MR4_TUF_MASK (1 << 7)
-
-/* MR4 SDRAM Refresh Rate field values */
-#define SDRAM_TEMP_LESS_LOW_SHUTDOWN 0x0
-#define SDRAM_TEMP_LESS_4X_REFRESH_AND_TIMINGS 0x1
-#define SDRAM_TEMP_LESS_2X_REFRESH_AND_TIMINGS 0x2
-#define SDRAM_TEMP_NOMINAL 0x3
-#define SDRAM_TEMP_RESERVED_4 0x4
-#define SDRAM_TEMP_HIGH_DERATE_REFRESH 0x5
-#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS 0x6
-#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN 0x7
-
-#define LPDDR2_MANUFACTURER_SAMSUNG 1
-#define LPDDR2_MANUFACTURER_QIMONDA 2
-#define LPDDR2_MANUFACTURER_ELPIDA 3
-#define LPDDR2_MANUFACTURER_ETRON 4
-#define LPDDR2_MANUFACTURER_NANYA 5
-#define LPDDR2_MANUFACTURER_HYNIX 6
-#define LPDDR2_MANUFACTURER_MOSEL 7
-#define LPDDR2_MANUFACTURER_WINBOND 8
-#define LPDDR2_MANUFACTURER_ESMT 9
-#define LPDDR2_MANUFACTURER_SPANSION 11
-#define LPDDR2_MANUFACTURER_SST 12
-#define LPDDR2_MANUFACTURER_ZMOS 13
-#define LPDDR2_MANUFACTURER_INTEL 14
-#define LPDDR2_MANUFACTURER_NUMONYX 254
-#define LPDDR2_MANUFACTURER_MICRON 255
-
-/* MR8 register fields */
-#define MR8_TYPE_SHIFT 0x0
-#define MR8_TYPE_MASK 0x3
-#define MR8_DENSITY_SHIFT 0x2
-#define MR8_DENSITY_MASK (0xF << 0x2)
-#define MR8_IO_WIDTH_SHIFT 0x6
-#define MR8_IO_WIDTH_MASK (0x3 << 0x6)
-
-struct lpddr2_addressing {
- u8 num_banks;
- u8 t_REFI_us_x10;
- u8 row_sz[2]; /* One entry each for x32 and x16 */
- u8 col_sz[2]; /* One entry each for x32 and x16 */
-};
-
-/* Structure for timings from the DDR datasheet */
-struct lpddr2_ac_timings {
- u32 max_freq;
- u8 RL;
- u8 tRPab;
- u8 tRCD;
- u8 tWR;
- u8 tRASmin;
- u8 tRRD;
- u8 tWTRx2;
- u8 tXSR;
- u8 tXPx2;
- u8 tRFCab;
- u8 tRTPx2;
- u8 tCKE;
- u8 tCKESR;
- u8 tZQCS;
- u32 tZQCL;
- u32 tZQINIT;
- u8 tDQSCKMAXx2;
- u8 tRASmax;
- u8 tFAW;
-
-};
-
-/*
- * Min tCK values for some of the parameters:
- * If the calculated clock cycles for the respective parameter is
- * less than the corresponding min tCK value, we need to set the min
- * tCK value. This may happen at lower frequencies.
- */
-struct lpddr2_min_tck {
- u32 tRL;
- u32 tRP_AB;
- u32 tRCD;
- u32 tWR;
- u32 tRAS_MIN;
- u32 tRRD;
- u32 tWTR;
- u32 tXP;
- u32 tRTP;
- u8 tCKE;
- u32 tCKESR;
- u32 tFAW;
-};
-
-struct lpddr2_device_details {
- u8 type;
- u8 density;
- u8 io_width;
- u8 manufacturer;
-};
-
-struct lpddr2_device_timings {
- const struct lpddr2_ac_timings **ac_timings;
- const struct lpddr2_min_tck *min_tck;
-};
-
-/* Details of the devices connected to each chip-select of an EMIF instance */
-struct emif_device_details {
- const struct lpddr2_device_details *cs0_device_details;
- const struct lpddr2_device_details *cs1_device_details;
- const struct lpddr2_device_timings *cs0_device_timings;
- const struct lpddr2_device_timings *cs1_device_timings;
-};
-
-/*
- * Structure containing shadow of important registers in EMIF
- * The calculation function fills in this structure to be later used for
- * initialization and DVFS
- */
-struct emif_regs {
- u32 freq;
- u32 sdram_config_init;
- u32 sdram_config;
- u32 ref_ctrl;
- u32 sdram_tim1;
- u32 sdram_tim2;
- u32 sdram_tim3;
- u32 read_idle_ctrl;
- u32 zq_config;
- u32 temp_alert_config;
- u32 emif_ddr_phy_ctlr_1_init;
- u32 emif_ddr_phy_ctlr_1;
-};
-
-/* assert macros */
-#if defined(DEBUG)
-#define emif_assert(c) ({ if (!(c)) for (;;); })
-#else
-#define emif_assert(c) ({ if (0) hang(); })
-#endif
-
-#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
-void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs);
-void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs);
-#else
-struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
- struct lpddr2_device_details *lpddr2_dev_details);
-void emif_get_device_timings(u32 emif_nr,
- const struct lpddr2_device_timings **cs0_device_timings,
- const struct lpddr2_device_timings **cs1_device_timings);
-#endif
-
-#endif
diff --git a/arch/arm/include/asm/arch-omap4/mmc_host_def.h b/arch/arm/include/asm/arch-omap4/mmc_host_def.h
index 733d8ed..74439c9 100644
--- a/arch/arm/include/asm/arch-omap4/mmc_host_def.h
+++ b/arch/arm/include/asm/arch-omap4/mmc_host_def.h
@@ -33,7 +33,7 @@
#define OMAP_HSMMC2_BASE 0x480B4100
#define OMAP_HSMMC3_BASE 0x480AD100
-typedef struct hsmmc {
+struct hsmmc {
unsigned char res1[0x10];
unsigned int sysconfig; /* 0x10 */
unsigned int sysstatus; /* 0x14 */
@@ -55,7 +55,7 @@ typedef struct hsmmc {
unsigned int ie; /* 0x134 */
unsigned char res4[0x8];
unsigned int capa; /* 0x140 */
-} hsmmc_t;
+};
/*
* OMAP HS MMC Bit definitions
@@ -160,13 +160,6 @@ typedef struct hsmmc {
#define CLK_400KHZ 1
#define CLK_MISC 2
-typedef struct {
- unsigned int card_type;
- unsigned int version;
- unsigned int mode;
- unsigned int size;
- unsigned int RCA;
-} mmc_card_data;
#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK)
#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
diff --git a/arch/arm/include/asm/arch-omap4/omap4.h b/arch/arm/include/asm/arch-omap4/omap.h
index 61ebb3d..e994257 100644
--- a/arch/arm/include/asm/arch-omap4/omap4.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -44,7 +44,8 @@
#define OMAP44XX_DRAM_ADDR_SPACE_START 0x80000000
#define OMAP44XX_DRAM_ADDR_SPACE_END 0xD0000000
-
+#define DRAM_ADDR_SPACE_START OMAP44XX_DRAM_ADDR_SPACE_START
+#define DRAM_ADDR_SPACE_END OMAP44XX_DRAM_ADDR_SPACE_END
/* CONTROL */
#define CTRL_BASE (OMAP44XX_L4_CORE_BASE + 0x2000)
@@ -57,16 +58,11 @@
/* CONTROL_ID_CODE */
#define CONTROL_ID_CODE 0x4A002204
-/* 4430 */
-#define OMAP4430_CONTROL_ID_CODE_ES1_0 0x0B85202F
-#define OMAP4430_CONTROL_ID_CODE_ES2_0 0x1B85202F
-#define OMAP4430_CONTROL_ID_CODE_ES2_1 0x3B95C02F
-#define OMAP4430_CONTROL_ID_CODE_ES2_2 0x4B95C02F
-#define OMAP4430_CONTROL_ID_CODE_ES2_3 0x6B95C02F
-
-/* 4460 */
-#define OMAP4460_CONTROL_ID_CODE_ES1_0 0x0B94E02F
-#define OMAP4460_CONTROL_ID_CODE_ES1_1 0x2B94E02F
+#define OMAP4_CONTROL_ID_CODE_ES1_0 0x0B85202F
+#define OMAP4_CONTROL_ID_CODE_ES2_0 0x1B85202F
+#define OMAP4_CONTROL_ID_CODE_ES2_1 0x3B95C02F
+#define OMAP4_CONTROL_ID_CODE_ES2_2 0x4B95C02F
+#define OMAP4_CONTROL_ID_CODE_ES2_3 0x6B95C02F
/* UART */
#define UART1_BASE (OMAP44XX_L4_PER_BASE + 0x6a000)
@@ -151,7 +147,7 @@ struct omap4_sys_ctrl_regs {
unsigned int control_ldosram_mpu_voltage_ctrl; /* 0x4A002324 */
unsigned int control_ldosram_core_voltage_ctrl; /* 0x4A002328 */
unsigned int pad3[260277];
- unsigned int control_pbiaslite; /* 0x4A100600 */
+ unsigned int control_pbiaslite; /* 0x4A100600 */
unsigned int pad4[63];
unsigned int control_efuse_1; /* 0x4A100700 */
unsigned int control_efuse_2; /* 0x4A100704 */
@@ -188,16 +184,6 @@ struct control_lpddr2io_regs {
#define OMAP4_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10)
#define OMAP4_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x14)
-/* Silicon revisions */
-#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF
-#define OMAP4430_ES1_0 0x44300100
-#define OMAP4430_ES2_0 0x44300200
-#define OMAP4430_ES2_1 0x44300210
-#define OMAP4430_ES2_2 0x44300220
-#define OMAP4430_ES2_3 0x44300230
-#define OMAP4460_ES1_0 0x44600100
-#define OMAP4460_ES1_1 0x44600110
-
/* ROM code defines */
/* Boot device */
#define BOOT_DEVICE_MASK 0xFF
@@ -205,5 +191,21 @@ struct control_lpddr2io_regs {
#define DEV_DESC_PTR_OFFSET 0x4
#define DEV_DATA_PTR_OFFSET 0x18
#define BOOT_MODE_OFFSET 0x8
+#define RESET_REASON_OFFSET 0x9
+#define CH_FLAGS_OFFSET 0xA
+
+#define CH_FLAGS_CHSETTINGS (0x1 << 0)
+#define CH_FLAGS_CHRAM (0x1 << 1)
+#define CH_FLAGS_CHFLASH (0x1 << 2)
+#define CH_FLAGS_CHMMCSD (0x1 << 3)
+#ifndef __ASSEMBLY__
+struct omap_boot_parameters {
+ char *boot_message;
+ unsigned int mem_boot_descriptor;
+ unsigned char omap_bootdevice;
+ unsigned char reset_reason;
+ unsigned char ch_flags;
+};
+#endif
#endif
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index 1aacbb1..4146e21 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -21,7 +21,7 @@
#ifndef _SYS_PROTO_H_
#define _SYS_PROTO_H_
-#include <asm/arch/omap4.h>
+#include <asm/arch/omap.h>
#include <asm/arch/clocks.h>
#include <asm/io.h>
#include <asm/omap_common.h>
@@ -32,17 +32,17 @@ struct omap_sysinfo {
};
extern const struct omap_sysinfo sysinfo;
-extern struct omap4_prcm_regs *const prcm;
-
void gpmc_init(void);
void watchdog_init(void);
u32 get_device_type(void);
void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
+void set_muxconf_regs_essential(void);
void set_muxconf_regs_non_essential(void);
void sr32(void *, u32, u32, u32);
u32 wait_on_value(u32, u32, void *, u32);
void sdelay(unsigned long);
void set_pl310_ctrl_reg(u32 val);
+void omap_rev_string(char *omap_rev_string);
void setup_clocks_for_console(void);
void prcm_init(void);
void bypass_dpll(u32 *const base);
@@ -51,7 +51,17 @@ u32 get_sys_clk_freq(void);
u32 omap4_ddr_clk(void);
void cancel_out(u32 *num, u32 *den, u32 den_limit);
void sdram_init(void);
-u32 omap4_sdram_size(void);
+u32 omap_sdram_size(void);
+u32 cortex_rev(void);
+void init_omap_revision(void);
+void do_io_settings(void);
+/*
+ * This is used to verify if the configuration header
+ * was executed by Romcode prior to control of transfer
+ * to the bootloader. SPL is responsible for saving and
+ * passing this to the u-boot.
+ */
+extern struct omap_boot_parameters boot_params;
static inline u32 running_from_sdram(void)
{
@@ -64,15 +74,17 @@ static inline u32 running_from_sdram(void)
static inline u8 uboot_loaded_by_spl(void)
{
/*
- * Configuration Header is not supported yet, so u-boot init running
- * from SDRAM implies that it was loaded by SPL. When this situation
- * changes one of these approaches could be taken:
- * i. Pass a magic from SPL to U-Boot and U-Boot save it at a known
- * location.
- * ii. Check the OPP. CH can support only 50% OPP while SPL initializes
- * the DPLLs at 100% OPP.
+ * u-boot can be running from sdram either because of configuration
+ * Header or by SPL. If because of CH, then the romcode sets the
+ * CHSETTINGS executed bit to true in the boot parameter structure that
+ * it passes to the bootloader.This parameter is stored in the ch_flags
+ * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
+ * mandatory section if CH is present.
*/
- return running_from_sdram();
+ if ((boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
+ return 0;
+ else
+ return running_from_sdram();
}
/*
* The basic hardware init of OMAP(s_init()) can happen in 4
@@ -86,7 +98,7 @@ static inline u8 uboot_loaded_by_spl(void)
* This function finds this context.
* Defining as inline may help in compiling out unused functions in SPL
*/
-static inline u32 omap4_hw_init_context(void)
+static inline u32 omap_hw_init_context(void)
{
#ifdef CONFIG_SPL_BUILD
return OMAP_INIT_CONTEXT_SPL;
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h
new file mode 100644
index 0000000..fa99f65
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/clocks.h
@@ -0,0 +1,722 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _CLOCKS_OMAP5_H_
+#define _CLOCKS_OMAP5_H_
+#include <common.h>
+
+/*
+ * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per
+ * loop, allow for a minimum of 2 ms wait (in reality the wait will be
+ * much more than that)
+ */
+#define LDELAY 1000000
+
+#define CM_CLKMODE_DPLL_CORE (OMAP54XX_L4_CORE_BASE + 0x4120)
+#define CM_CLKMODE_DPLL_PER (OMAP54XX_L4_CORE_BASE + 0x8140)
+#define CM_CLKMODE_DPLL_MPU (OMAP54XX_L4_CORE_BASE + 0x4160)
+#define CM_CLKSEL_CORE (OMAP54XX_L4_CORE_BASE + 0x4100)
+
+struct omap5_prcm_regs {
+ /* cm1.ckgen */
+ u32 cm_clksel_core; /* 4a004100 */
+ u32 pad001[1]; /* 4a004104 */
+ u32 cm_clksel_abe; /* 4a004108 */
+ u32 pad002[1]; /* 4a00410c */
+ u32 cm_dll_ctrl; /* 4a004110 */
+ u32 pad003[3]; /* 4a004114 */
+ u32 cm_clkmode_dpll_core; /* 4a004120 */
+ u32 cm_idlest_dpll_core; /* 4a004124 */
+ u32 cm_autoidle_dpll_core; /* 4a004128 */
+ u32 cm_clksel_dpll_core; /* 4a00412c */
+ u32 cm_div_m2_dpll_core; /* 4a004130 */
+ u32 cm_div_m3_dpll_core; /* 4a004134 */
+ u32 cm_div_h11_dpll_core; /* 4a004138 */
+ u32 cm_div_h12_dpll_core; /* 4a00413c */
+ u32 cm_div_h13_dpll_core; /* 4a004140 */
+ u32 cm_div_h14_dpll_core; /* 4a004144 */
+ u32 cm_ssc_deltamstep_dpll_core; /* 4a004148 */
+ u32 cm_ssc_modfreqdiv_dpll_core; /* 4a00414c */
+ u32 cm_emu_override_dpll_core; /* 4a004150 */
+
+ u32 cm_div_h22_dpllcore; /* 4a004154 */
+ u32 cm_div_h23_dpll_core; /* 4a004158 */
+ u32 pad0041[1]; /* 4a00415c */
+ u32 cm_clkmode_dpll_mpu; /* 4a004160 */
+ u32 cm_idlest_dpll_mpu; /* 4a004164 */
+ u32 cm_autoidle_dpll_mpu; /* 4a004168 */
+ u32 cm_clksel_dpll_mpu; /* 4a00416c */
+ u32 cm_div_m2_dpll_mpu; /* 4a004170 */
+ u32 pad005[5]; /* 4a004174 */
+ u32 cm_ssc_deltamstep_dpll_mpu; /* 4a004188 */
+ u32 cm_ssc_modfreqdiv_dpll_mpu; /* 4a00418c */
+ u32 pad006[3]; /* 4a004190 */
+ u32 cm_bypclk_dpll_mpu; /* 4a00419c */
+ u32 cm_clkmode_dpll_iva; /* 4a0041a0 */
+ u32 cm_idlest_dpll_iva; /* 4a0041a4 */
+ u32 cm_autoidle_dpll_iva; /* 4a0041a8 */
+ u32 cm_clksel_dpll_iva; /* 4a0041ac */
+ u32 pad007[2]; /* 4a0041b0 */
+ u32 cm_div_h11_dpll_iva; /* 4a0041b8 */
+ u32 cm_div_h12_dpll_iva; /* 4a0041bc */
+ u32 pad008[2]; /* 4a0041c0 */
+ u32 cm_ssc_deltamstep_dpll_iva; /* 4a0041c8 */
+ u32 cm_ssc_modfreqdiv_dpll_iva; /* 4a0041cc */
+ u32 pad009[3]; /* 4a0041d0 */
+ u32 cm_bypclk_dpll_iva; /* 4a0041dc */
+ u32 cm_clkmode_dpll_abe; /* 4a0041e0 */
+ u32 cm_idlest_dpll_abe; /* 4a0041e4 */
+ u32 cm_autoidle_dpll_abe; /* 4a0041e8 */
+ u32 cm_clksel_dpll_abe; /* 4a0041ec */
+ u32 cm_div_m2_dpll_abe; /* 4a0041f0 */
+ u32 cm_div_m3_dpll_abe; /* 4a0041f4 */
+ u32 pad010[4]; /* 4a0041f8 */
+ u32 cm_ssc_deltamstep_dpll_abe; /* 4a004208 */
+ u32 cm_ssc_modfreqdiv_dpll_abe; /* 4a00420c */
+ u32 pad011[4]; /* 4a004210 */
+ u32 cm_clkmode_dpll_ddrphy; /* 4a004220 */
+ u32 cm_idlest_dpll_ddrphy; /* 4a004224 */
+ u32 cm_autoidle_dpll_ddrphy; /* 4a004228 */
+ u32 cm_clksel_dpll_ddrphy; /* 4a00422c */
+ u32 cm_div_m2_dpll_ddrphy; /* 4a004230 */
+ u32 pad012[1]; /* 4a004234 */
+ u32 cm_div_h11_dpll_ddrphy; /* 4a004238 */
+ u32 cm_div_h12_dpll_ddrphy; /* 4a00423c */
+ u32 cm_div_h13_dpll_ddrphy; /* 4a004240 */
+ u32 pad013[1]; /* 4a004244 */
+ u32 cm_ssc_deltamstep_dpll_ddrphy; /* 4a004248 */
+ u32 pad014[5]; /* 4a00424c */
+ u32 cm_shadow_freq_config1; /* 4a004260 */
+ u32 pad0141[47]; /* 4a004264 */
+ u32 cm_mpu_mpu_clkctrl; /* 4a004320 */
+
+
+ /* cm1.dsp */
+ u32 pad015[55]; /* 4a004324 */
+ u32 cm_dsp_clkstctrl; /* 4a004400 */
+ u32 pad016[7]; /* 4a004404 */
+ u32 cm_dsp_dsp_clkctrl; /* 4a004420 */
+
+ /* cm1.abe */
+ u32 pad017[55]; /* 4a004424 */
+ u32 cm1_abe_clkstctrl; /* 4a004500 */
+ u32 pad018[7]; /* 4a004504 */
+ u32 cm1_abe_l4abe_clkctrl; /* 4a004520 */
+ u32 pad019[1]; /* 4a004524 */
+ u32 cm1_abe_aess_clkctrl; /* 4a004528 */
+ u32 pad020[1]; /* 4a00452c */
+ u32 cm1_abe_pdm_clkctrl; /* 4a004530 */
+ u32 pad021[1]; /* 4a004534 */
+ u32 cm1_abe_dmic_clkctrl; /* 4a004538 */
+ u32 pad022[1]; /* 4a00453c */
+ u32 cm1_abe_mcasp_clkctrl; /* 4a004540 */
+ u32 pad023[1]; /* 4a004544 */
+ u32 cm1_abe_mcbsp1_clkctrl; /* 4a004548 */
+ u32 pad024[1]; /* 4a00454c */
+ u32 cm1_abe_mcbsp2_clkctrl; /* 4a004550 */
+ u32 pad025[1]; /* 4a004554 */
+ u32 cm1_abe_mcbsp3_clkctrl; /* 4a004558 */
+ u32 pad026[1]; /* 4a00455c */
+ u32 cm1_abe_slimbus_clkctrl; /* 4a004560 */
+ u32 pad027[1]; /* 4a004564 */
+ u32 cm1_abe_timer5_clkctrl; /* 4a004568 */
+ u32 pad028[1]; /* 4a00456c */
+ u32 cm1_abe_timer6_clkctrl; /* 4a004570 */
+ u32 pad029[1]; /* 4a004574 */
+ u32 cm1_abe_timer7_clkctrl; /* 4a004578 */
+ u32 pad030[1]; /* 4a00457c */
+ u32 cm1_abe_timer8_clkctrl; /* 4a004580 */
+ u32 pad031[1]; /* 4a004584 */
+ u32 cm1_abe_wdt3_clkctrl; /* 4a004588 */
+
+ /* cm2.ckgen */
+ u32 pad032[3805]; /* 4a00458c */
+ u32 cm_clksel_mpu_m3_iss_root; /* 4a008100 */
+ u32 cm_clksel_usb_60mhz; /* 4a008104 */
+ u32 cm_scale_fclk; /* 4a008108 */
+ u32 pad033[1]; /* 4a00810c */
+ u32 cm_core_dvfs_perf1; /* 4a008110 */
+ u32 cm_core_dvfs_perf2; /* 4a008114 */
+ u32 cm_core_dvfs_perf3; /* 4a008118 */
+ u32 cm_core_dvfs_perf4; /* 4a00811c */
+ u32 pad034[1]; /* 4a008120 */
+ u32 cm_core_dvfs_current; /* 4a008124 */
+ u32 cm_iva_dvfs_perf_tesla; /* 4a008128 */
+ u32 cm_iva_dvfs_perf_ivahd; /* 4a00812c */
+ u32 cm_iva_dvfs_perf_abe; /* 4a008130 */
+ u32 pad035[1]; /* 4a008134 */
+ u32 cm_iva_dvfs_current; /* 4a008138 */
+ u32 pad036[1]; /* 4a00813c */
+ u32 cm_clkmode_dpll_per; /* 4a008140 */
+ u32 cm_idlest_dpll_per; /* 4a008144 */
+ u32 cm_autoidle_dpll_per; /* 4a008148 */
+ u32 cm_clksel_dpll_per; /* 4a00814c */
+ u32 cm_div_m2_dpll_per; /* 4a008150 */
+ u32 cm_div_m3_dpll_per; /* 4a008154 */
+ u32 cm_div_h11_dpll_per; /* 4a008158 */
+ u32 cm_div_h12_dpll_per; /* 4a00815c */
+ u32 pad0361[1]; /* 4a008160 */
+ u32 cm_div_h14_dpll_per; /* 4a008164 */
+ u32 cm_ssc_deltamstep_dpll_per; /* 4a008168 */
+ u32 cm_ssc_modfreqdiv_dpll_per; /* 4a00816c */
+ u32 cm_emu_override_dpll_per; /* 4a008170 */
+ u32 pad037[3]; /* 4a008174 */
+ u32 cm_clkmode_dpll_usb; /* 4a008180 */
+ u32 cm_idlest_dpll_usb; /* 4a008184 */
+ u32 cm_autoidle_dpll_usb; /* 4a008188 */
+ u32 cm_clksel_dpll_usb; /* 4a00818c */
+ u32 cm_div_m2_dpll_usb; /* 4a008190 */
+ u32 pad038[5]; /* 4a008194 */
+ u32 cm_ssc_deltamstep_dpll_usb; /* 4a0081a8 */
+ u32 cm_ssc_modfreqdiv_dpll_usb; /* 4a0081ac */
+ u32 pad039[1]; /* 4a0081b0 */
+ u32 cm_clkdcoldo_dpll_usb; /* 4a0081b4 */
+ u32 pad040[2]; /* 4a0081b8 */
+ u32 cm_clkmode_dpll_unipro; /* 4a0081c0 */
+ u32 cm_idlest_dpll_unipro; /* 4a0081c4 */
+ u32 cm_autoidle_dpll_unipro; /* 4a0081c8 */
+ u32 cm_clksel_dpll_unipro; /* 4a0081cc */
+ u32 cm_div_m2_dpll_unipro; /* 4a0081d0 */
+ u32 pad041[5]; /* 4a0081d4 */
+ u32 cm_ssc_deltamstep_dpll_unipro; /* 4a0081e8 */
+ u32 cm_ssc_modfreqdiv_dpll_unipro; /* 4a0081ec */
+
+ /* cm2.core */
+ u32 pad0411[324]; /* 4a0081f0 */
+ u32 cm_l3_1_clkstctrl; /* 4a008700 */
+ u32 pad042[1]; /* 4a008704 */
+ u32 cm_l3_1_dynamicdep; /* 4a008708 */
+ u32 pad043[5]; /* 4a00870c */
+ u32 cm_l3_1_l3_1_clkctrl; /* 4a008720 */
+ u32 pad044[55]; /* 4a008724 */
+ u32 cm_l3_2_clkstctrl; /* 4a008800 */
+ u32 pad045[1]; /* 4a008804 */
+ u32 cm_l3_2_dynamicdep; /* 4a008808 */
+ u32 pad046[5]; /* 4a00880c */
+ u32 cm_l3_2_l3_2_clkctrl; /* 4a008820 */
+ u32 pad047[1]; /* 4a008824 */
+ u32 cm_l3_2_gpmc_clkctrl; /* 4a008828 */
+ u32 pad048[1]; /* 4a00882c */
+ u32 cm_l3_2_ocmc_ram_clkctrl; /* 4a008830 */
+ u32 pad049[51]; /* 4a008834 */
+ u32 cm_mpu_m3_clkstctrl; /* 4a008900 */
+ u32 cm_mpu_m3_staticdep; /* 4a008904 */
+ u32 cm_mpu_m3_dynamicdep; /* 4a008908 */
+ u32 pad050[5]; /* 4a00890c */
+ u32 cm_mpu_m3_mpu_m3_clkctrl; /* 4a008920 */
+ u32 pad051[55]; /* 4a008924 */
+ u32 cm_sdma_clkstctrl; /* 4a008a00 */
+ u32 cm_sdma_staticdep; /* 4a008a04 */
+ u32 cm_sdma_dynamicdep; /* 4a008a08 */
+ u32 pad052[5]; /* 4a008a0c */
+ u32 cm_sdma_sdma_clkctrl; /* 4a008a20 */
+ u32 pad053[55]; /* 4a008a24 */
+ u32 cm_memif_clkstctrl; /* 4a008b00 */
+ u32 pad054[7]; /* 4a008b04 */
+ u32 cm_memif_dmm_clkctrl; /* 4a008b20 */
+ u32 pad055[1]; /* 4a008b24 */
+ u32 cm_memif_emif_fw_clkctrl; /* 4a008b28 */
+ u32 pad056[1]; /* 4a008b2c */
+ u32 cm_memif_emif_1_clkctrl; /* 4a008b30 */
+ u32 pad057[1]; /* 4a008b34 */
+ u32 cm_memif_emif_2_clkctrl; /* 4a008b38 */
+ u32 pad058[1]; /* 4a008b3c */
+ u32 cm_memif_dll_clkctrl; /* 4a008b40 */
+ u32 pad059[3]; /* 4a008b44 */
+ u32 cm_memif_emif_h1_clkctrl; /* 4a008b50 */
+ u32 pad060[1]; /* 4a008b54 */
+ u32 cm_memif_emif_h2_clkctrl; /* 4a008b58 */
+ u32 pad061[1]; /* 4a008b5c */
+ u32 cm_memif_dll_h_clkctrl; /* 4a008b60 */
+ u32 pad062[39]; /* 4a008b64 */
+ u32 cm_c2c_clkstctrl; /* 4a008c00 */
+ u32 cm_c2c_staticdep; /* 4a008c04 */
+ u32 cm_c2c_dynamicdep; /* 4a008c08 */
+ u32 pad063[5]; /* 4a008c0c */
+ u32 cm_c2c_sad2d_clkctrl; /* 4a008c20 */
+ u32 pad064[1]; /* 4a008c24 */
+ u32 cm_c2c_modem_icr_clkctrl; /* 4a008c28 */
+ u32 pad065[1]; /* 4a008c2c */
+ u32 cm_c2c_sad2d_fw_clkctrl; /* 4a008c30 */
+ u32 pad066[51]; /* 4a008c34 */
+ u32 cm_l4cfg_clkstctrl; /* 4a008d00 */
+ u32 pad067[1]; /* 4a008d04 */
+ u32 cm_l4cfg_dynamicdep; /* 4a008d08 */
+ u32 pad068[5]; /* 4a008d0c */
+ u32 cm_l4cfg_l4_cfg_clkctrl; /* 4a008d20 */
+ u32 pad069[1]; /* 4a008d24 */
+ u32 cm_l4cfg_hw_sem_clkctrl; /* 4a008d28 */
+ u32 pad070[1]; /* 4a008d2c */
+ u32 cm_l4cfg_mailbox_clkctrl; /* 4a008d30 */
+ u32 pad071[1]; /* 4a008d34 */
+ u32 cm_l4cfg_sar_rom_clkctrl; /* 4a008d38 */
+ u32 pad072[49]; /* 4a008d3c */
+ u32 cm_l3instr_clkstctrl; /* 4a008e00 */
+ u32 pad073[7]; /* 4a008e04 */
+ u32 cm_l3instr_l3_3_clkctrl; /* 4a008e20 */
+ u32 pad074[1]; /* 4a008e24 */
+ u32 cm_l3instr_l3_instr_clkctrl; /* 4a008e28 */
+ u32 pad075[5]; /* 4a008e2c */
+ u32 cm_l3instr_intrconn_wp1_clkctrl; /* 4a008e40 */
+
+
+ /* cm2.ivahd */
+ u32 pad076[47]; /* 4a008e44 */
+ u32 cm_ivahd_clkstctrl; /* 4a008f00 */
+ u32 pad077[7]; /* 4a008f04 */
+ u32 cm_ivahd_ivahd_clkctrl; /* 4a008f20 */
+ u32 pad078[1]; /* 4a008f24 */
+ u32 cm_ivahd_sl2_clkctrl; /* 4a008f28 */
+
+ /* cm2.cam */
+ u32 pad079[53]; /* 4a008f2c */
+ u32 cm_cam_clkstctrl; /* 4a009000 */
+ u32 pad080[7]; /* 4a009004 */
+ u32 cm_cam_iss_clkctrl; /* 4a009020 */
+ u32 pad081[1]; /* 4a009024 */
+ u32 cm_cam_fdif_clkctrl; /* 4a009028 */
+
+ /* cm2.dss */
+ u32 pad082[53]; /* 4a00902c */
+ u32 cm_dss_clkstctrl; /* 4a009100 */
+ u32 pad083[7]; /* 4a009104 */
+ u32 cm_dss_dss_clkctrl; /* 4a009120 */
+
+ /* cm2.sgx */
+ u32 pad084[55]; /* 4a009124 */
+ u32 cm_sgx_clkstctrl; /* 4a009200 */
+ u32 pad085[7]; /* 4a009204 */
+ u32 cm_sgx_sgx_clkctrl; /* 4a009220 */
+
+ /* cm2.l3init */
+ u32 pad086[55]; /* 4a009224 */
+ u32 cm_l3init_clkstctrl; /* 4a009300 */
+
+ /* cm2.l3init */
+ u32 pad087[9]; /* 4a009304 */
+ u32 cm_l3init_hsmmc1_clkctrl; /* 4a009328 */
+ u32 pad088[1]; /* 4a00932c */
+ u32 cm_l3init_hsmmc2_clkctrl; /* 4a009330 */
+ u32 pad089[1]; /* 4a009334 */
+ u32 cm_l3init_hsi_clkctrl; /* 4a009338 */
+ u32 pad090[7]; /* 4a00933c */
+ u32 cm_l3init_hsusbhost_clkctrl; /* 4a009358 */
+ u32 pad091[1]; /* 4a00935c */
+ u32 cm_l3init_hsusbotg_clkctrl; /* 4a009360 */
+ u32 pad092[1]; /* 4a009364 */
+ u32 cm_l3init_hsusbtll_clkctrl; /* 4a009368 */
+ u32 pad093[3]; /* 4a00936c */
+ u32 cm_l3init_p1500_clkctrl; /* 4a009378 */
+ u32 pad094[21]; /* 4a00937c */
+ u32 cm_l3init_fsusb_clkctrl; /* 4a0093d0 */
+ u32 pad095[3]; /* 4a0093d4 */
+ u32 cm_l3init_ocp2scp1_clkctrl;
+
+ /* cm2.l4per */
+ u32 pad096[7]; /* 4a0093e4 */
+ u32 cm_l4per_clkstctrl; /* 4a009400 */
+ u32 pad097[1]; /* 4a009404 */
+ u32 cm_l4per_dynamicdep; /* 4a009408 */
+ u32 pad098[5]; /* 4a00940c */
+ u32 cm_l4per_adc_clkctrl; /* 4a009420 */
+ u32 pad100[1]; /* 4a009424 */
+ u32 cm_l4per_gptimer10_clkctrl; /* 4a009428 */
+ u32 pad101[1]; /* 4a00942c */
+ u32 cm_l4per_gptimer11_clkctrl; /* 4a009430 */
+ u32 pad102[1]; /* 4a009434 */
+ u32 cm_l4per_gptimer2_clkctrl; /* 4a009438 */
+ u32 pad103[1]; /* 4a00943c */
+ u32 cm_l4per_gptimer3_clkctrl; /* 4a009440 */
+ u32 pad104[1]; /* 4a009444 */
+ u32 cm_l4per_gptimer4_clkctrl; /* 4a009448 */
+ u32 pad105[1]; /* 4a00944c */
+ u32 cm_l4per_gptimer9_clkctrl; /* 4a009450 */
+ u32 pad106[1]; /* 4a009454 */
+ u32 cm_l4per_elm_clkctrl; /* 4a009458 */
+ u32 pad107[1]; /* 4a00945c */
+ u32 cm_l4per_gpio2_clkctrl; /* 4a009460 */
+ u32 pad108[1]; /* 4a009464 */
+ u32 cm_l4per_gpio3_clkctrl; /* 4a009468 */
+ u32 pad109[1]; /* 4a00946c */
+ u32 cm_l4per_gpio4_clkctrl; /* 4a009470 */
+ u32 pad110[1]; /* 4a009474 */
+ u32 cm_l4per_gpio5_clkctrl; /* 4a009478 */
+ u32 pad111[1]; /* 4a00947c */
+ u32 cm_l4per_gpio6_clkctrl; /* 4a009480 */
+ u32 pad112[1]; /* 4a009484 */
+ u32 cm_l4per_hdq1w_clkctrl; /* 4a009488 */
+ u32 pad113[1]; /* 4a00948c */
+ u32 cm_l4per_hecc1_clkctrl; /* 4a009490 */
+ u32 pad114[1]; /* 4a009494 */
+ u32 cm_l4per_hecc2_clkctrl; /* 4a009498 */
+ u32 pad115[1]; /* 4a00949c */
+ u32 cm_l4per_i2c1_clkctrl; /* 4a0094a0 */
+ u32 pad116[1]; /* 4a0094a4 */
+ u32 cm_l4per_i2c2_clkctrl; /* 4a0094a8 */
+ u32 pad117[1]; /* 4a0094ac */
+ u32 cm_l4per_i2c3_clkctrl; /* 4a0094b0 */
+ u32 pad118[1]; /* 4a0094b4 */
+ u32 cm_l4per_i2c4_clkctrl; /* 4a0094b8 */
+ u32 pad119[1]; /* 4a0094bc */
+ u32 cm_l4per_l4per_clkctrl; /* 4a0094c0 */
+ u32 pad1191[3]; /* 4a0094c4 */
+ u32 cm_l4per_mcasp2_clkctrl; /* 4a0094d0 */
+ u32 pad120[1]; /* 4a0094d4 */
+ u32 cm_l4per_mcasp3_clkctrl; /* 4a0094d8 */
+ u32 pad121[3]; /* 4a0094dc */
+ u32 cm_l4per_mgate_clkctrl; /* 4a0094e8 */
+ u32 pad123[1]; /* 4a0094ec */
+ u32 cm_l4per_mcspi1_clkctrl; /* 4a0094f0 */
+ u32 pad124[1]; /* 4a0094f4 */
+ u32 cm_l4per_mcspi2_clkctrl; /* 4a0094f8 */
+ u32 pad125[1]; /* 4a0094fc */
+ u32 cm_l4per_mcspi3_clkctrl; /* 4a009500 */
+ u32 pad126[1]; /* 4a009504 */
+ u32 cm_l4per_mcspi4_clkctrl; /* 4a009508 */
+ u32 pad127[1]; /* 4a00950c */
+ u32 cm_l4per_gpio7_clkctrl; /* 4a009510 */
+ u32 pad1271[1]; /* 4a009514 */
+ u32 cm_l4per_gpio8_clkctrl; /* 4a009518 */
+ u32 pad1272[1]; /* 4a00951c */
+ u32 cm_l4per_mmcsd3_clkctrl; /* 4a009520 */
+ u32 pad128[1]; /* 4a009524 */
+ u32 cm_l4per_mmcsd4_clkctrl; /* 4a009528 */
+ u32 pad129[1]; /* 4a00952c */
+ u32 cm_l4per_msprohg_clkctrl; /* 4a009530 */
+ u32 pad130[1]; /* 4a009534 */
+ u32 cm_l4per_slimbus2_clkctrl; /* 4a009538 */
+ u32 pad131[1]; /* 4a00953c */
+ u32 cm_l4per_uart1_clkctrl; /* 4a009540 */
+ u32 pad132[1]; /* 4a009544 */
+ u32 cm_l4per_uart2_clkctrl; /* 4a009548 */
+ u32 pad133[1]; /* 4a00954c */
+ u32 cm_l4per_uart3_clkctrl; /* 4a009550 */
+ u32 pad134[1]; /* 4a009554 */
+ u32 cm_l4per_uart4_clkctrl; /* 4a009558 */
+ u32 pad135[1]; /* 4a00955c */
+ u32 cm_l4per_mmcsd5_clkctrl; /* 4a009560 */
+ u32 pad136[1]; /* 4a009564 */
+ u32 cm_l4per_i2c5_clkctrl; /* 4a009568 */
+ u32 pad1371[1]; /* 4a00956c */
+ u32 cm_l4per_uart5_clkctrl; /* 4a009570 */
+ u32 pad1372[1]; /* 4a009574 */
+ u32 cm_l4per_uart6_clkctrl; /* 4a009578 */
+ u32 pad1374[1]; /* 4a00957c */
+ u32 cm_l4sec_clkstctrl; /* 4a009580 */
+ u32 cm_l4sec_staticdep; /* 4a009584 */
+ u32 cm_l4sec_dynamicdep; /* 4a009588 */
+ u32 pad138[5]; /* 4a00958c */
+ u32 cm_l4sec_aes1_clkctrl; /* 4a0095a0 */
+ u32 pad139[1]; /* 4a0095a4 */
+ u32 cm_l4sec_aes2_clkctrl; /* 4a0095a8 */
+ u32 pad140[1]; /* 4a0095ac */
+ u32 cm_l4sec_des3des_clkctrl; /* 4a0095b0 */
+ u32 pad141[1]; /* 4a0095b4 */
+ u32 cm_l4sec_pkaeip29_clkctrl; /* 4a0095b8 */
+ u32 pad142[1]; /* 4a0095bc */
+ u32 cm_l4sec_rng_clkctrl; /* 4a0095c0 */
+ u32 pad143[1]; /* 4a0095c4 */
+ u32 cm_l4sec_sha2md51_clkctrl; /* 4a0095c8 */
+ u32 pad144[3]; /* 4a0095cc */
+ u32 cm_l4sec_cryptodma_clkctrl; /* 4a0095d8 */
+ u32 pad145[3660425]; /* 4a0095dc */
+
+ /* l4 wkup regs */
+ u32 pad201[6211]; /* 4ae00000 */
+ u32 cm_abe_pll_ref_clksel; /* 4ae0610c */
+ u32 cm_sys_clksel; /* 4ae06110 */
+ u32 pad202[1467]; /* 4ae06114 */
+ u32 cm_wkup_clkstctrl; /* 4ae07800 */
+ u32 pad203[7]; /* 4ae07804 */
+ u32 cm_wkup_l4wkup_clkctrl; /* 4ae07820 */
+ u32 pad204; /* 4ae07824 */
+ u32 cm_wkup_wdtimer1_clkctrl; /* 4ae07828 */
+ u32 pad205; /* 4ae0782c */
+ u32 cm_wkup_wdtimer2_clkctrl; /* 4ae07830 */
+ u32 pad206; /* 4ae07834 */
+ u32 cm_wkup_gpio1_clkctrl; /* 4ae07838 */
+ u32 pad207; /* 4ae0783c */
+ u32 cm_wkup_gptimer1_clkctrl; /* 4ae07840 */
+ u32 pad208; /* 4ae07844 */
+ u32 cm_wkup_gptimer12_clkctrl; /* 4ae07848 */
+ u32 pad209; /* 4ae0784c */
+ u32 cm_wkup_synctimer_clkctrl; /* 4ae07850 */
+ u32 pad210; /* 4ae07854 */
+ u32 cm_wkup_usim_clkctrl; /* 4ae07858 */
+ u32 pad211; /* 4ae0785c */
+ u32 cm_wkup_sarram_clkctrl; /* 4ae07860 */
+ u32 pad212[5]; /* 4ae07864 */
+ u32 cm_wkup_keyboard_clkctrl; /* 4ae07878 */
+ u32 pad213; /* 4ae0787c */
+ u32 cm_wkup_rtc_clkctrl; /* 4ae07880 */
+ u32 pad214; /* 4ae07884 */
+ u32 cm_wkup_bandgap_clkctrl; /* 4ae07888 */
+ u32 pad215[197]; /* 4ae0788c */
+ u32 prm_vc_val_bypass; /* 4ae07ba0 */
+ u32 pad216[4];
+ u32 prm_vc_cfg_i2c_mode; /* 4ae07bb4 */
+ u32 prm_vc_cfg_i2c_clk; /* 4ae07bb8 */
+};
+
+/* DPLL register offsets */
+#define CM_CLKMODE_DPLL 0
+#define CM_IDLEST_DPLL 0x4
+#define CM_AUTOIDLE_DPLL 0x8
+#define CM_CLKSEL_DPLL 0xC
+
+#define DPLL_CLKOUT_DIV_MASK 0x1F /* post-divider mask */
+
+/* CM_CLKMODE_DPLL */
+#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT 11
+#define CM_CLKMODE_DPLL_REGM4XEN_MASK (1 << 11)
+#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT 10
+#define CM_CLKMODE_DPLL_LPMODE_EN_MASK (1 << 10)
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_SHIFT 9
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK (1 << 9)
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_SHIFT 8
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK (1 << 8)
+#define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT 5
+#define CM_CLKMODE_DPLL_RAMP_RATE_MASK (0x7 << 5)
+#define CM_CLKMODE_DPLL_EN_SHIFT 0
+#define CM_CLKMODE_DPLL_EN_MASK (0x7 << 0)
+
+#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT 0
+#define CM_CLKMODE_DPLL_DPLL_EN_MASK 7
+
+#define DPLL_EN_STOP 1
+#define DPLL_EN_MN_BYPASS 4
+#define DPLL_EN_LOW_POWER_BYPASS 5
+#define DPLL_EN_FAST_RELOCK_BYPASS 6
+#define DPLL_EN_LOCK 7
+
+/* CM_IDLEST_DPLL fields */
+#define ST_DPLL_CLK_MASK 1
+
+/* CM_CLKSEL_DPLL */
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT 24
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK (0xFF << 24)
+#define CM_CLKSEL_DPLL_M_SHIFT 8
+#define CM_CLKSEL_DPLL_M_MASK (0x7FF << 8)
+#define CM_CLKSEL_DPLL_N_SHIFT 0
+#define CM_CLKSEL_DPLL_N_MASK 0x7F
+#define CM_CLKSEL_DCC_EN_SHIFT 22
+#define CM_CLKSEL_DCC_EN_MASK (1 << 22)
+
+#define OMAP4_DPLL_MAX_N 127
+
+/* CM_SYS_CLKSEL */
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK 7
+
+/* CM_CLKSEL_CORE */
+#define CLKSEL_CORE_SHIFT 0
+#define CLKSEL_L3_SHIFT 4
+#define CLKSEL_L4_SHIFT 8
+
+#define CLKSEL_CORE_X2_DIV_1 0
+#define CLKSEL_L3_CORE_DIV_2 1
+#define CLKSEL_L4_L3_DIV_2 1
+
+/* CM_ABE_PLL_REF_CLKSEL */
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT 0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK 1
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK 0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK 1
+
+/* CM_BYPCLK_DPLL_IVA */
+#define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT 0
+#define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK 3
+
+#define DPLL_IVA_CLKSEL_CORE_X2_DIV_2 1
+
+/* CM_SHADOW_FREQ_CONFIG1 */
+#define SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK 1
+#define SHADOW_FREQ_CONFIG1_DLL_OVERRIDE_MASK 4
+#define SHADOW_FREQ_CONFIG1_DLL_RESET_MASK 8
+
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT 8
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_MASK (7 << 8)
+
+#define SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT 11
+#define SHADOW_FREQ_CONFIG1_M2_DIV_MASK (0x1F << 11)
+
+/*CM_<clock_domain>__CLKCTRL */
+#define CD_CLKCTRL_CLKTRCTRL_SHIFT 0
+#define CD_CLKCTRL_CLKTRCTRL_MASK 3
+
+#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP 0
+#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP 1
+#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP 2
+#define CD_CLKCTRL_CLKTRCTRL_HW_AUTO 3
+
+
+/* CM_<clock_domain>_<module>_CLKCTRL */
+#define MODULE_CLKCTRL_MODULEMODE_SHIFT 0
+#define MODULE_CLKCTRL_MODULEMODE_MASK 3
+#define MODULE_CLKCTRL_IDLEST_SHIFT 16
+#define MODULE_CLKCTRL_IDLEST_MASK (3 << 16)
+
+#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE 0
+#define MODULE_CLKCTRL_MODULEMODE_HW_AUTO 1
+#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN 2
+
+#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL 0
+#define MODULE_CLKCTRL_IDLEST_TRANSITIONING 1
+#define MODULE_CLKCTRL_IDLEST_IDLE 2
+#define MODULE_CLKCTRL_IDLEST_DISABLED 3
+
+/* CM_L4PER_GPIO4_CLKCTRL */
+#define GPIO4_CLKCTRL_OPTFCLKEN_MASK (1 << 8)
+
+/* CM_L3INIT_HSMMCn_CLKCTRL */
+#define HSMMC_CLKCTRL_CLKSEL_MASK (1 << 24)
+
+/* CM_WKUP_GPTIMER1_CLKCTRL */
+#define GPTIMER1_CLKCTRL_CLKSEL_MASK (1 << 24)
+
+/* CM_CAM_ISS_CLKCTRL */
+#define ISS_CLKCTRL_OPTFCLKEN_MASK (1 << 8)
+
+/* CM_DSS_DSS_CLKCTRL */
+#define DSS_CLKCTRL_OPTFCLKEN_MASK 0xF00
+
+/* CM_L3INIT_USBPHY_CLKCTRL */
+#define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK 8
+
+/* CM_MPU_MPU_CLKCTRL */
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_SHIFT 24
+#define MPU_CLKCTRL_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24)
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_SHIFT 25
+#define MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK (1 << 25)
+
+/* Clock frequencies */
+#define OMAP_SYS_CLK_FREQ_38_4_MHZ 38400000
+#define OMAP_SYS_CLK_IND_38_4_MHZ 6
+#define OMAP_32K_CLK_FREQ 32768
+
+/* PRM_VC_CFG_I2C_CLK */
+#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT 0
+#define PRM_VC_CFG_I2C_CLK_SCLH_MASK 0xFF
+#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT 8
+#define PRM_VC_CFG_I2C_CLK_SCLL_MASK (0xFF << 8)
+
+/* PRM_VC_VAL_BYPASS */
+#define PRM_VC_I2C_CHANNEL_FREQ_KHZ 400
+
+#define PRM_VC_VAL_BYPASS_VALID_BIT 0x1000000
+#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT 0
+#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK 0x7F
+#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT 8
+#define PRM_VC_VAL_BYPASS_REGADDR_MASK 0xFF
+#define PRM_VC_VAL_BYPASS_DATA_SHIFT 16
+#define PRM_VC_VAL_BYPASS_DATA_MASK 0xFF
+
+/* SMPS */
+#define SMPS_I2C_SLAVE_ADDR 0x12
+#define SMPS_REG_ADDR_VCORE1 0x55
+#define SMPS_REG_ADDR_VCORE2 0x5B
+#define SMPS_REG_ADDR_VCORE3 0x61
+
+#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV 607700
+#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV 709000
+
+/* TPS */
+#define TPS62361_I2C_SLAVE_ADDR 0x60
+#define TPS62361_REG_ADDR_SET0 0x0
+#define TPS62361_REG_ADDR_SET1 0x1
+#define TPS62361_REG_ADDR_SET2 0x2
+#define TPS62361_REG_ADDR_SET3 0x3
+#define TPS62361_REG_ADDR_CTRL 0x4
+#define TPS62361_REG_ADDR_TEMP 0x5
+#define TPS62361_REG_ADDR_RMP_CTRL 0x6
+#define TPS62361_REG_ADDR_CHIP_ID 0x8
+#define TPS62361_REG_ADDR_CHIP_ID_2 0x9
+
+#define TPS62361_BASE_VOLT_MV 500
+#define TPS62361_VSEL0_GPIO 7
+
+/* Defines for DPLL setup */
+#define DPLL_LOCKED_FREQ_TOLERANCE_0 0
+#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ 500
+#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ 1000
+
+#define DPLL_NO_LOCK 0
+#define DPLL_LOCK 1
+
+#define NUM_SYS_CLKS 7
+
+struct dpll_regs {
+ u32 cm_clkmode_dpll;
+ u32 cm_idlest_dpll;
+ u32 cm_autoidle_dpll;
+ u32 cm_clksel_dpll;
+ u32 cm_div_m2_dpll;
+ u32 cm_div_m3_dpll;
+ u32 cm_div_h11_dpll;
+ u32 cm_div_h12_dpll;
+ u32 cm_div_h13_dpll;
+ u32 cm_div_h14_dpll;
+ u32 reserved[2];
+ u32 cm_div_h22_dpll;
+ u32 cm_div_h23_dpll;
+};
+
+/* DPLL parameter table */
+struct dpll_params {
+ u32 m;
+ u32 n;
+ u8 m2;
+ u8 m3;
+ u8 h11;
+ u8 h12;
+ u8 h13;
+ u8 h14;
+ u8 h22;
+ u8 h23;
+};
+
+extern struct omap5_prcm_regs *const prcm;
+extern const u32 sys_clk_array[8];
+
+void scale_vcores(void);
+void do_scale_tps62361(u32 reg, u32 volt_mv);
+u32 omap_ddr_clk(void);
+void do_scale_vcore(u32 vcore_reg, u32 volt_mv);
+void setup_sri2c(void);
+void setup_post_dividers(u32 *const base, const struct dpll_params *params);
+u32 get_sys_clk_index(void);
+void enable_basic_clocks(void);
+void enable_non_essential_clocks(void);
+void enable_basic_uboot_clocks(void);
+void do_enable_clocks(u32 *const *clk_domains,
+ u32 *const *clk_modules_hw_auto,
+ u32 *const *clk_modules_explicit_en,
+ u8 wait_for_enable);
+const struct dpll_params *get_mpu_dpll_params(void);
+const struct dpll_params *get_core_dpll_params(void);
+const struct dpll_params *get_per_dpll_params(void);
+const struct dpll_params *get_iva_dpll_params(void);
+const struct dpll_params *get_usb_dpll_params(void);
+const struct dpll_params *get_abe_dpll_params(void);
+#endif /* _CLOCKS_OMAP5_H_ */
diff --git a/arch/arm/include/asm/arch-omap5/cpu.h b/arch/arm/include/asm/arch-omap5/cpu.h
new file mode 100644
index 0000000..0697a73
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/cpu.h
@@ -0,0 +1,175 @@
+/*
+ * (C) Copyright 2006-2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef _CPU_H
+#define _CPU_H
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct gpmc_cs {
+ u32 config1; /* 0x00 */
+ u32 config2; /* 0x04 */
+ u32 config3; /* 0x08 */
+ u32 config4; /* 0x0C */
+ u32 config5; /* 0x10 */
+ u32 config6; /* 0x14 */
+ u32 config7; /* 0x18 */
+ u32 nand_cmd; /* 0x1C */
+ u32 nand_adr; /* 0x20 */
+ u32 nand_dat; /* 0x24 */
+ u8 res[8]; /* blow up to 0x30 byte */
+};
+
+struct gpmc {
+ u8 res1[0x10];
+ u32 sysconfig; /* 0x10 */
+ u8 res2[0x4];
+ u32 irqstatus; /* 0x18 */
+ u32 irqenable; /* 0x1C */
+ u8 res3[0x20];
+ u32 timeout_control; /* 0x40 */
+ u8 res4[0xC];
+ u32 config; /* 0x50 */
+ u32 status; /* 0x54 */
+ u8 res5[0x8]; /* 0x58 */
+ struct gpmc_cs cs[8]; /* 0x60, 0x90, .. */
+ u8 res6[0x14]; /* 0x1E0 */
+ u32 ecc_config; /* 0x1F4 */
+ u32 ecc_control; /* 0x1F8 */
+ u32 ecc_size_config; /* 0x1FC */
+ u32 ecc1_result; /* 0x200 */
+ u32 ecc2_result; /* 0x204 */
+ u32 ecc3_result; /* 0x208 */
+ u32 ecc4_result; /* 0x20C */
+ u32 ecc5_result; /* 0x210 */
+ u32 ecc6_result; /* 0x214 */
+ u32 ecc7_result; /* 0x218 */
+ u32 ecc8_result; /* 0x21C */
+ u32 ecc9_result; /* 0x220 */
+};
+
+/* Used for board specific gpmc initialization */
+extern struct gpmc *gpmc_cfg;
+
+struct gptimer {
+ u32 tidr; /* 0x00 r */
+ u8 res1[0xc];
+ u32 tiocp_cfg; /* 0x10 rw */
+ u8 res2[0x10];
+ u32 tisr_raw; /* 0x24 r */
+ u32 tisr; /* 0x28 rw */
+ u32 tier; /* 0x2c rw */
+ u32 ticr; /* 0x30 rw */
+ u32 twer; /* 0x34 rw */
+ u32 tclr; /* 0x38 rw */
+ u32 tcrr; /* 0x3c rw */
+ u32 tldr; /* 0x40 rw */
+ u32 ttgr; /* 0x44 rw */
+ u32 twpc; /* 0x48 r */
+ u32 tmar; /* 0x4c rw */
+ u32 tcar1; /* 0x50 r */
+ u32 tcicr; /* 0x54 rw */
+ u32 tcar2; /* 0x58 r */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+/* enable sys_clk NO-prescale /1 */
+#define GPT_EN ((0x0 << 2) | (0x1 << 1) | (0x1 << 0))
+
+/* Watchdog */
+#ifndef __KERNEL_STRICT_NAMES
+#ifndef __ASSEMBLY__
+struct watchdog {
+ u8 res1[0x34];
+ u32 wwps; /* 0x34 r */
+ u8 res2[0x10];
+ u32 wspr; /* 0x48 rw */
+};
+#endif /* __ASSEMBLY__ */
+#endif /* __KERNEL_STRICT_NAMES */
+
+#define WD_UNLOCK1 0xAAAA
+#define WD_UNLOCK2 0x5555
+
+#define SYSCLKDIV_1 (0x1 << 6)
+#define SYSCLKDIV_2 (0x1 << 7)
+
+#define CLKSEL_GPT1 (0x1 << 0)
+
+#define EN_GPT1 (0x1 << 0)
+#define EN_32KSYNC (0x1 << 2)
+
+#define ST_WDT2 (0x1 << 5)
+
+#define RESETDONE (0x1 << 0)
+
+#define TCLR_ST (0x1 << 0)
+#define TCLR_AR (0x1 << 1)
+#define TCLR_PRE (0x1 << 5)
+
+/* GPMC BASE */
+#define GPMC_BASE (OMAP54XX_GPMC_BASE)
+
+/* I2C base */
+#define I2C_BASE1 (OMAP54XX_L4_PER_BASE + 0x70000)
+#define I2C_BASE2 (OMAP54XX_L4_PER_BASE + 0x72000)
+#define I2C_BASE3 (OMAP54XX_L4_PER_BASE + 0x60000)
+
+/* MUSB base */
+#define MUSB_BASE (OMAP54XX_L4_CORE_BASE + 0xAB000)
+
+/* OMAP4 GPIO registers */
+#define OMAP_GPIO_REVISION 0x0000
+#define OMAP_GPIO_SYSCONFIG 0x0010
+#define OMAP_GPIO_SYSSTATUS 0x0114
+#define OMAP_GPIO_IRQSTATUS1 0x0118
+#define OMAP_GPIO_IRQSTATUS2 0x0128
+#define OMAP_GPIO_IRQENABLE2 0x012c
+#define OMAP_GPIO_IRQENABLE1 0x011c
+#define OMAP_GPIO_WAKE_EN 0x0120
+#define OMAP_GPIO_CTRL 0x0130
+#define OMAP_GPIO_OE 0x0134
+#define OMAP_GPIO_DATAIN 0x0138
+#define OMAP_GPIO_DATAOUT 0x013c
+#define OMAP_GPIO_LEVELDETECT0 0x0140
+#define OMAP_GPIO_LEVELDETECT1 0x0144
+#define OMAP_GPIO_RISINGDETECT 0x0148
+#define OMAP_GPIO_FALLINGDETECT 0x014c
+#define OMAP_GPIO_DEBOUNCE_EN 0x0150
+#define OMAP_GPIO_DEBOUNCE_VAL 0x0154
+#define OMAP_GPIO_CLEARIRQENABLE1 0x0160
+#define OMAP_GPIO_SETIRQENABLE1 0x0164
+#define OMAP_GPIO_CLEARWKUENA 0x0180
+#define OMAP_GPIO_SETWKUENA 0x0184
+#define OMAP_GPIO_CLEARDATAOUT 0x0190
+#define OMAP_GPIO_SETDATAOUT 0x0194
+
+#endif /* _CPU_H */
diff --git a/arch/arm/include/asm/arch-omap5/gpio.h b/arch/arm/include/asm/arch-omap5/gpio.h
new file mode 100644
index 0000000..c14dff0
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/gpio.h
@@ -0,0 +1,50 @@
+/*
+ * Copyright (c) 2009 Wind River Systems, Inc.
+ * Tom Rix <Tom.Rix@windriver.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * This work is derived from the linux 2.6.27 kernel source
+ * To fetch, use the kernel repository
+ * git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ * Use the v2.6.27 tag.
+ *
+ * Below is the original's header including its copyright
+ *
+ * linux/arch/arm/plat-omap/gpio.c
+ *
+ * Support functions for OMAP GPIO
+ *
+ * Copyright (C) 2003-2005 Nokia Corporation
+ * Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _GPIO_OMAP5_H
+#define _GPIO_OMAP5_H
+
+#include <asm/omap_gpio.h>
+
+#define OMAP54XX_GPIO1_BASE 0x4Ae10000
+#define OMAP54XX_GPIO2_BASE 0x48055000
+#define OMAP54XX_GPIO3_BASE 0x48057000
+#define OMAP54XX_GPIO4_BASE 0x48059000
+#define OMAP54XX_GPIO5_BASE 0x4805B000
+#define OMAP54XX_GPIO6_BASE 0x4805D000
+
+#endif /* _GPIO_OMAP5_H */
diff --git a/arch/arm/include/asm/arch-omap5/i2c.h b/arch/arm/include/asm/arch-omap5/i2c.h
new file mode 100644
index 0000000..68be03b
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/i2c.h
@@ -0,0 +1,74 @@
+/*
+ * (C) Copyright 2004-2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _OMAP5_I2C_H_
+#define _OMAP5_I2C_H_
+
+#define I2C_BUS_MAX 3
+#define I2C_DEFAULT_BASE I2C_BASE1
+
+struct i2c {
+ unsigned short revnb_lo; /* 0x00 */
+ unsigned short res1;
+ unsigned short revnb_hi; /* 0x04 */
+ unsigned short res2[13];
+ unsigned short sysc; /* 0x20 */
+ unsigned short res3;
+ unsigned short irqstatus_raw; /* 0x24 */
+ unsigned short res4;
+ unsigned short stat; /* 0x28 */
+ unsigned short res5;
+ unsigned short ie; /* 0x2C */
+ unsigned short res6;
+ unsigned short irqenable_clr; /* 0x30 */
+ unsigned short res7;
+ unsigned short iv; /* 0x34 */
+ unsigned short res8[45];
+ unsigned short syss; /* 0x90 */
+ unsigned short res9;
+ unsigned short buf; /* 0x94 */
+ unsigned short res10;
+ unsigned short cnt; /* 0x98 */
+ unsigned short res11;
+ unsigned short data; /* 0x9C */
+ unsigned short res13;
+ unsigned short res14; /* 0xA0 */
+ unsigned short res15;
+ unsigned short con; /* 0xA4 */
+ unsigned short res16;
+ unsigned short oa; /* 0xA8 */
+ unsigned short res17;
+ unsigned short sa; /* 0xAC */
+ unsigned short res18;
+ unsigned short psc; /* 0xB0 */
+ unsigned short res19;
+ unsigned short scll; /* 0xB4 */
+ unsigned short res20;
+ unsigned short sclh; /* 0xB8 */
+ unsigned short res21;
+ unsigned short systest; /* 0xBC */
+ unsigned short res22;
+ unsigned short bufstat; /* 0xC0 */
+ unsigned short res23;
+};
+
+#endif /* _OMAP5_I2C_H_ */
diff --git a/arch/arm/include/asm/arch-omap5/mmc_host_def.h b/arch/arm/include/asm/arch-omap5/mmc_host_def.h
new file mode 100644
index 0000000..74439c9
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/mmc_host_def.h
@@ -0,0 +1,174 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ * Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation's version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef MMC_HOST_DEF_H
+#define MMC_HOST_DEF_H
+
+/*
+ * OMAP HSMMC register definitions
+ */
+
+#define OMAP_HSMMC1_BASE 0x4809C100
+#define OMAP_HSMMC2_BASE 0x480B4100
+#define OMAP_HSMMC3_BASE 0x480AD100
+
+struct hsmmc {
+ unsigned char res1[0x10];
+ unsigned int sysconfig; /* 0x10 */
+ unsigned int sysstatus; /* 0x14 */
+ unsigned char res2[0x14];
+ unsigned int con; /* 0x2C */
+ unsigned char res3[0xD4];
+ unsigned int blk; /* 0x104 */
+ unsigned int arg; /* 0x108 */
+ unsigned int cmd; /* 0x10C */
+ unsigned int rsp10; /* 0x110 */
+ unsigned int rsp32; /* 0x114 */
+ unsigned int rsp54; /* 0x118 */
+ unsigned int rsp76; /* 0x11C */
+ unsigned int data; /* 0x120 */
+ unsigned int pstate; /* 0x124 */
+ unsigned int hctl; /* 0x128 */
+ unsigned int sysctl; /* 0x12C */
+ unsigned int stat; /* 0x130 */
+ unsigned int ie; /* 0x134 */
+ unsigned char res4[0x8];
+ unsigned int capa; /* 0x140 */
+};
+
+/*
+ * OMAP HS MMC Bit definitions
+ */
+#define MMC_SOFTRESET (0x1 << 1)
+#define RESETDONE (0x1 << 0)
+#define NOOPENDRAIN (0x0 << 0)
+#define OPENDRAIN (0x1 << 0)
+#define OD (0x1 << 0)
+#define INIT_NOINIT (0x0 << 1)
+#define INIT_INITSTREAM (0x1 << 1)
+#define HR_NOHOSTRESP (0x0 << 2)
+#define STR_BLOCK (0x0 << 3)
+#define MODE_FUNC (0x0 << 4)
+#define DW8_1_4BITMODE (0x0 << 5)
+#define MIT_CTO (0x0 << 6)
+#define CDP_ACTIVEHIGH (0x0 << 7)
+#define WPP_ACTIVEHIGH (0x0 << 8)
+#define RESERVED_MASK (0x3 << 9)
+#define CTPL_MMC_SD (0x0 << 11)
+#define BLEN_512BYTESLEN (0x200 << 0)
+#define NBLK_STPCNT (0x0 << 16)
+#define DE_DISABLE (0x0 << 0)
+#define BCE_DISABLE (0x0 << 1)
+#define BCE_ENABLE (0x1 << 1)
+#define ACEN_DISABLE (0x0 << 2)
+#define DDIR_OFFSET (4)
+#define DDIR_MASK (0x1 << 4)
+#define DDIR_WRITE (0x0 << 4)
+#define DDIR_READ (0x1 << 4)
+#define MSBS_SGLEBLK (0x0 << 5)
+#define MSBS_MULTIBLK (0x1 << 5)
+#define RSP_TYPE_OFFSET (16)
+#define RSP_TYPE_MASK (0x3 << 16)
+#define RSP_TYPE_NORSP (0x0 << 16)
+#define RSP_TYPE_LGHT136 (0x1 << 16)
+#define RSP_TYPE_LGHT48 (0x2 << 16)
+#define RSP_TYPE_LGHT48B (0x3 << 16)
+#define CCCE_NOCHECK (0x0 << 19)
+#define CCCE_CHECK (0x1 << 19)
+#define CICE_NOCHECK (0x0 << 20)
+#define CICE_CHECK (0x1 << 20)
+#define DP_OFFSET (21)
+#define DP_MASK (0x1 << 21)
+#define DP_NO_DATA (0x0 << 21)
+#define DP_DATA (0x1 << 21)
+#define CMD_TYPE_NORMAL (0x0 << 22)
+#define INDEX_OFFSET (24)
+#define INDEX_MASK (0x3f << 24)
+#define INDEX(i) (i << 24)
+#define DATI_MASK (0x1 << 1)
+#define DATI_CMDDIS (0x1 << 1)
+#define DTW_1_BITMODE (0x0 << 1)
+#define DTW_4_BITMODE (0x1 << 1)
+#define DTW_8_BITMODE (0x1 << 5) /* CON[DW8]*/
+#define SDBP_PWROFF (0x0 << 8)
+#define SDBP_PWRON (0x1 << 8)
+#define SDVS_1V8 (0x5 << 9)
+#define SDVS_3V0 (0x6 << 9)
+#define ICE_MASK (0x1 << 0)
+#define ICE_STOP (0x0 << 0)
+#define ICS_MASK (0x1 << 1)
+#define ICS_NOTREADY (0x0 << 1)
+#define ICE_OSCILLATE (0x1 << 0)
+#define CEN_MASK (0x1 << 2)
+#define CEN_DISABLE (0x0 << 2)
+#define CEN_ENABLE (0x1 << 2)
+#define CLKD_OFFSET (6)
+#define CLKD_MASK (0x3FF << 6)
+#define DTO_MASK (0xF << 16)
+#define DTO_15THDTO (0xE << 16)
+#define SOFTRESETALL (0x1 << 24)
+#define CC_MASK (0x1 << 0)
+#define TC_MASK (0x1 << 1)
+#define BWR_MASK (0x1 << 4)
+#define BRR_MASK (0x1 << 5)
+#define ERRI_MASK (0x1 << 15)
+#define IE_CC (0x01 << 0)
+#define IE_TC (0x01 << 1)
+#define IE_BWR (0x01 << 4)
+#define IE_BRR (0x01 << 5)
+#define IE_CTO (0x01 << 16)
+#define IE_CCRC (0x01 << 17)
+#define IE_CEB (0x01 << 18)
+#define IE_CIE (0x01 << 19)
+#define IE_DTO (0x01 << 20)
+#define IE_DCRC (0x01 << 21)
+#define IE_DEB (0x01 << 22)
+#define IE_CERR (0x01 << 28)
+#define IE_BADA (0x01 << 29)
+
+#define VS30_3V0SUP (1 << 25)
+#define VS18_1V8SUP (1 << 26)
+
+/* Driver definitions */
+#define MMCSD_SECTOR_SIZE 512
+#define MMC_CARD 0
+#define SD_CARD 1
+#define BYTE_MODE 0
+#define SECTOR_MODE 1
+#define CLK_INITSEQ 0
+#define CLK_400KHZ 1
+#define CLK_MISC 2
+
+#define RSP_TYPE_NONE (RSP_TYPE_NORSP | CCCE_NOCHECK | CICE_NOCHECK)
+#define MMC_CMD0 (INDEX(0) | RSP_TYPE_NONE | DP_NO_DATA | DDIR_WRITE)
+
+/* Clock Configurations and Macros */
+#define MMC_CLOCK_REFERENCE 96 /* MHz */
+
+#define mmc_reg_out(addr, mask, val)\
+ writel((readl(addr) & (~(mask))) | ((val) & (mask)), (addr))
+
+int omap_mmc_init(int dev_index);
+
+#endif /* MMC_HOST_DEF_H */
diff --git a/arch/arm/include/asm/arch-omap5/mux_omap5.h b/arch/arm/include/asm/arch-omap5/mux_omap5.h
new file mode 100644
index 0000000..b8c2185
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/mux_omap5.h
@@ -0,0 +1,344 @@
+/*
+ * (C) Copyright 2004-2009
+ * Texas Instruments Incorporated
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Aneesh V <aneesh@ti.com>
+ * Balaji Krishnamoorthy <balajitk@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _MUX_OMAP5_H_
+#define _MUX_OMAP5_H_
+
+#include <asm/types.h>
+
+struct pad_conf_entry {
+
+ u16 offset;
+
+ u16 val;
+
+} __attribute__ ((__packed__));
+
+#ifdef CONFIG_OFF_PADCONF
+#define OFF_PD (1 << 12)
+#define OFF_PU (3 << 12)
+#define OFF_OUT_PTD (0 << 10)
+#define OFF_OUT_PTU (2 << 10)
+#define OFF_IN (1 << 10)
+#define OFF_OUT (0 << 10)
+#define OFF_EN (1 << 9)
+#else
+#define OFF_PD (0 << 12)
+#define OFF_PU (0 << 12)
+#define OFF_OUT_PTD (0 << 10)
+#define OFF_OUT_PTU (0 << 10)
+#define OFF_IN (0 << 10)
+#define OFF_OUT (0 << 10)
+#define OFF_EN (0 << 9)
+#endif
+
+#define IEN (1 << 8)
+#define IDIS (0 << 8)
+#define PTU (3 << 3)
+#define PTD (1 << 3)
+#define EN (1 << 3)
+#define DIS (0 << 3)
+
+#define M0 0
+#define M1 1
+#define M2 2
+#define M3 3
+#define M4 4
+#define M5 5
+#define M6 6
+#define M7 7
+
+#define SAFE_MODE M7
+
+#ifdef CONFIG_OFF_PADCONF
+#define OFF_IN_PD (OFF_PD | OFF_IN | OFF_EN)
+#define OFF_IN_PU (OFF_PU | OFF_IN | OFF_EN)
+#define OFF_OUT_PD (OFF_OUT_PTD | OFF_OUT | OFF_EN)
+#define OFF_OUT_PU (OFF_OUT_PTU | OFF_OUT | OFF_EN)
+#else
+#define OFF_IN_PD 0
+#define OFF_IN_PU 0
+#define OFF_OUT_PD 0
+#define OFF_OUT_PU 0
+#endif
+
+#define CORE_REVISION 0x0000
+#define CORE_HWINFO 0x0004
+#define CORE_SYSCONFIG 0x0010
+#define GPMC_AD0 0x0040
+#define GPMC_AD1 0x0042
+#define GPMC_AD2 0x0044
+#define GPMC_AD3 0x0046
+#define GPMC_AD4 0x0048
+#define GPMC_AD5 0x004A
+#define GPMC_AD6 0x004C
+#define GPMC_AD7 0x004E
+#define GPMC_AD8 0x0050
+#define GPMC_AD9 0x0052
+#define GPMC_AD10 0x0054
+#define GPMC_AD11 0x0056
+#define GPMC_AD12 0x0058
+#define GPMC_AD13 0x005A
+#define GPMC_AD14 0x005C
+#define GPMC_AD15 0x005E
+#define GPMC_A16 0x0060
+#define GPMC_A17 0x0062
+#define GPMC_A18 0x0064
+#define GPMC_A19 0x0066
+#define GPMC_A20 0x0068
+#define GPMC_A21 0x006A
+#define GPMC_A22 0x006C
+#define GPMC_A23 0x006E
+#define GPMC_A24 0x0070
+#define GPMC_A25 0x0072
+#define GPMC_NCS0 0x0074
+#define GPMC_NCS1 0x0076
+#define GPMC_NCS2 0x0078
+#define GPMC_NCS3 0x007A
+#define GPMC_NWP 0x007C
+#define GPMC_CLK 0x007E
+#define GPMC_NADV_ALE 0x0080
+#define GPMC_NOE 0x0082
+#define GPMC_NWE 0x0084
+#define GPMC_NBE0_CLE 0x0086
+#define GPMC_NBE1 0x0088
+#define GPMC_WAIT0 0x008A
+#define GPMC_WAIT1 0x008C
+#define C2C_DATA11 0x008E
+#define C2C_DATA12 0x0090
+#define C2C_DATA13 0x0092
+#define C2C_DATA14 0x0094
+#define C2C_DATA15 0x0096
+#define HDMI_HPD 0x0098
+#define HDMI_CEC 0x009A
+#define HDMI_DDC_SCL 0x009C
+#define HDMI_DDC_SDA 0x009E
+#define CSI21_DX0 0x00A0
+#define CSI21_DY0 0x00A2
+#define CSI21_DX1 0x00A4
+#define CSI21_DY1 0x00A6
+#define CSI21_DX2 0x00A8
+#define CSI21_DY2 0x00AA
+#define CSI21_DX3 0x00AC
+#define CSI21_DY3 0x00AE
+#define CSI21_DX4 0x00B0
+#define CSI21_DY4 0x00B2
+#define CSI22_DX0 0x00B4
+#define CSI22_DY0 0x00B6
+#define CSI22_DX1 0x00B8
+#define CSI22_DY1 0x00BA
+#define CAM_SHUTTER 0x00BC
+#define CAM_STROBE 0x00BE
+#define CAM_GLOBALRESET 0x00C0
+#define USBB1_ULPITLL_CLK 0x00C2
+#define USBB1_ULPITLL_STP 0x00C4
+#define USBB1_ULPITLL_DIR 0x00C6
+#define USBB1_ULPITLL_NXT 0x00C8
+#define USBB1_ULPITLL_DAT0 0x00CA
+#define USBB1_ULPITLL_DAT1 0x00CC
+#define USBB1_ULPITLL_DAT2 0x00CE
+#define USBB1_ULPITLL_DAT3 0x00D0
+#define USBB1_ULPITLL_DAT4 0x00D2
+#define USBB1_ULPITLL_DAT5 0x00D4
+#define USBB1_ULPITLL_DAT6 0x00D6
+#define USBB1_ULPITLL_DAT7 0x00D8
+#define USBB1_HSIC_DATA 0x00DA
+#define USBB1_HSIC_STROBE 0x00DC
+#define USBC1_ICUSB_DP 0x00DE
+#define USBC1_ICUSB_DM 0x00E0
+#define SDMMC1_CLK 0x00E2
+#define SDMMC1_CMD 0x00E4
+#define SDMMC1_DAT0 0x00E6
+#define SDMMC1_DAT1 0x00E8
+#define SDMMC1_DAT2 0x00EA
+#define SDMMC1_DAT3 0x00EC
+#define SDMMC1_DAT4 0x00EE
+#define SDMMC1_DAT5 0x00F0
+#define SDMMC1_DAT6 0x00F2
+#define SDMMC1_DAT7 0x00F4
+#define ABE_MCBSP2_CLKX 0x00F6
+#define ABE_MCBSP2_DR 0x00F8
+#define ABE_MCBSP2_DX 0x00FA
+#define ABE_MCBSP2_FSX 0x00FC
+#define ABE_MCBSP1_CLKX 0x00FE
+#define ABE_MCBSP1_DR 0x0100
+#define ABE_MCBSP1_DX 0x0102
+#define ABE_MCBSP1_FSX 0x0104
+#define ABE_PDM_UL_DATA 0x0106
+#define ABE_PDM_DL_DATA 0x0108
+#define ABE_PDM_FRAME 0x010A
+#define ABE_PDM_LB_CLK 0x010C
+#define ABE_CLKS 0x010E
+#define ABE_DMIC_CLK1 0x0110
+#define ABE_DMIC_DIN1 0x0112
+#define ABE_DMIC_DIN2 0x0114
+#define ABE_DMIC_DIN3 0x0116
+#define UART2_CTS 0x0118
+#define UART2_RTS 0x011A
+#define UART2_RX 0x011C
+#define UART2_TX 0x011E
+#define HDQ_SIO 0x0120
+#define I2C1_SCL 0x0122
+#define I2C1_SDA 0x0124
+#define I2C2_SCL 0x0126
+#define I2C2_SDA 0x0128
+#define I2C3_SCL 0x012A
+#define I2C3_SDA 0x012C
+#define I2C4_SCL 0x012E
+#define I2C4_SDA 0x0130
+#define MCSPI1_CLK 0x0132
+#define MCSPI1_SOMI 0x0134
+#define MCSPI1_SIMO 0x0136
+#define MCSPI1_CS0 0x0138
+#define MCSPI1_CS1 0x013A
+#define MCSPI1_CS2 0x013C
+#define MCSPI1_CS3 0x013E
+#define UART3_CTS_RCTX 0x0140
+#define UART3_RTS_SD 0x0142
+#define UART3_RX_IRRX 0x0144
+#define UART3_TX_IRTX 0x0146
+#define SDMMC5_CLK 0x0148
+#define SDMMC5_CMD 0x014A
+#define SDMMC5_DAT0 0x014C
+#define SDMMC5_DAT1 0x014E
+#define SDMMC5_DAT2 0x0150
+#define SDMMC5_DAT3 0x0152
+#define MCSPI4_CLK 0x0154
+#define MCSPI4_SIMO 0x0156
+#define MCSPI4_SOMI 0x0158
+#define MCSPI4_CS0 0x015A
+#define UART4_RX 0x015C
+#define UART4_TX 0x015E
+#define USBB2_ULPITLL_CLK 0x0160
+#define USBB2_ULPITLL_STP 0x0162
+#define USBB2_ULPITLL_DIR 0x0164
+#define USBB2_ULPITLL_NXT 0x0166
+#define USBB2_ULPITLL_DAT0 0x0168
+#define USBB2_ULPITLL_DAT1 0x016A
+#define USBB2_ULPITLL_DAT2 0x016C
+#define USBB2_ULPITLL_DAT3 0x016E
+#define USBB2_ULPITLL_DAT4 0x0170
+#define USBB2_ULPITLL_DAT5 0x0172
+#define USBB2_ULPITLL_DAT6 0x0174
+#define USBB2_ULPITLL_DAT7 0x0176
+#define USBB2_HSIC_DATA 0x0178
+#define USBB2_HSIC_STROBE 0x017A
+#define UNIPRO_TX0 0x017C
+#define UNIPRO_TY0 0x017E
+#define UNIPRO_TX1 0x0180
+#define UNIPRO_TY1 0x0182
+#define UNIPRO_TX2 0x0184
+#define UNIPRO_TY2 0x0186
+#define UNIPRO_RX0 0x0188
+#define UNIPRO_RY0 0x018A
+#define UNIPRO_RX1 0x018C
+#define UNIPRO_RY1 0x018E
+#define UNIPRO_RX2 0x0190
+#define UNIPRO_RY2 0x0192
+#define USBA0_OTG_CE 0x0194
+#define USBA0_OTG_DP 0x0196
+#define USBA0_OTG_DM 0x0198
+#define FREF_CLK1_OUT 0x019A
+#define FREF_CLK2_OUT 0x019C
+#define SYS_NIRQ1 0x019E
+#define SYS_NIRQ2 0x01A0
+#define SYS_BOOT0 0x01A2
+#define SYS_BOOT1 0x01A4
+#define SYS_BOOT2 0x01A6
+#define SYS_BOOT3 0x01A8
+#define SYS_BOOT4 0x01AA
+#define SYS_BOOT5 0x01AC
+#define DPM_EMU0 0x01AE
+#define DPM_EMU1 0x01B0
+#define DPM_EMU2 0x01B2
+#define DPM_EMU3 0x01B4
+#define DPM_EMU4 0x01B6
+#define DPM_EMU5 0x01B8
+#define DPM_EMU6 0x01BA
+#define DPM_EMU7 0x01BC
+#define DPM_EMU8 0x01BE
+#define DPM_EMU9 0x01C0
+#define DPM_EMU10 0x01C2
+#define DPM_EMU11 0x01C4
+#define DPM_EMU12 0x01C6
+#define DPM_EMU13 0x01C8
+#define DPM_EMU14 0x01CA
+#define DPM_EMU15 0x01CC
+#define DPM_EMU16 0x01CE
+#define DPM_EMU17 0x01D0
+#define DPM_EMU18 0x01D2
+#define DPM_EMU19 0x01D4
+#define WAKEUPEVENT_0 0x01D8
+#define WAKEUPEVENT_1 0x01DC
+#define WAKEUPEVENT_2 0x01E0
+#define WAKEUPEVENT_3 0x01E4
+#define WAKEUPEVENT_4 0x01E8
+#define WAKEUPEVENT_5 0x01EC
+#define WAKEUPEVENT_6 0x01F0
+
+#define WKUP_REVISION 0x0000
+#define WKUP_HWINFO 0x0004
+#define WKUP_SYSCONFIG 0x0010
+#define PAD0_SIM_IO 0x0040
+#define PAD1_SIM_CLK 0x0042
+#define PAD0_SIM_RESET 0x0044
+#define PAD1_SIM_CD 0x0046
+#define PAD0_SIM_PWRCTRL 0x0048
+#define PAD1_SR_SCL 0x004A
+#define PAD0_SR_SDA 0x004C
+#define PAD1_FREF_XTAL_IN 0x004E
+#define PAD0_FREF_SLICER_IN 0x0050
+#define PAD1_FREF_CLK_IOREQ 0x0052
+#define PAD0_FREF_CLK0_OUT 0x0054
+#define PAD1_FREF_CLK3_REQ 0x0056
+#define PAD0_FREF_CLK3_OUT 0x0058
+#define PAD1_FREF_CLK4_REQ 0x005A
+#define PAD0_FREF_CLK4_OUT 0x005C
+#define PAD1_SYS_32K 0x005E
+#define PAD0_SYS_NRESPWRON 0x0060
+#define PAD1_SYS_NRESWARM 0x0062
+#define PAD0_SYS_PWR_REQ 0x0064
+#define PAD1_SYS_PWRON_RESET 0x0066
+#define PAD0_SYS_BOOT6 0x0068
+#define PAD1_SYS_BOOT7 0x006A
+#define PAD0_JTAG_NTRST 0x006C
+#define PAD1_JTAG_TCK 0x006D
+#define PAD0_JTAG_RTCK 0x0070
+#define PAD1_JTAG_TMS_TMSC 0x0072
+#define PAD0_JTAG_TDI 0x0074
+#define PAD1_JTAG_TDO 0x0076
+#define PADCONF_WAKEUPEVENT_0 0x007C
+#define CONTROL_SMART1NOPMIO_PADCONF_0 0x05A0
+#define CONTROL_SMART1NOPMIO_PADCONF_1 0x05A4
+#define PADCONF_MODE 0x05A8
+#define CONTROL_XTAL_OSCILLATOR 0x05AC
+#define CONTROL_CONTROL_I2C_2 0x0604
+#define CONTROL_CONTROL_JTAG 0x0608
+#define CONTROL_CONTROL_SYS 0x060C
+#define CONTROL_SPARE_RW 0x0614
+#define CONTROL_SPARE_R 0x0618
+#define CONTROL_SPARE_R_C0 0x061C
+
+#endif /* _MUX_OMAP5_H_ */
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
new file mode 100644
index 0000000..d811d6e
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -0,0 +1,223 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Authors:
+ * Aneesh V <aneesh@ti.com>
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _OMAP5_H_
+#define _OMAP5_H_
+
+#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
+#include <asm/types.h>
+#endif /* !(__KERNEL_STRICT_NAMES || __ASSEMBLY__) */
+
+/*
+ * L4 Peripherals - L4 Wakeup and L4 Core now
+ */
+#define OMAP54XX_L4_CORE_BASE 0x4A000000
+#define OMAP54XX_L4_WKUP_BASE 0x4Ae00000
+#define OMAP54XX_L4_PER_BASE 0x48000000
+
+#define OMAP54XX_DRAM_ADDR_SPACE_START 0x80000000
+#define OMAP54XX_DRAM_ADDR_SPACE_END 0xD0000000
+#define DRAM_ADDR_SPACE_START OMAP54XX_DRAM_ADDR_SPACE_START
+#define DRAM_ADDR_SPACE_END OMAP54XX_DRAM_ADDR_SPACE_END
+
+/* CONTROL */
+#define CTRL_BASE (OMAP54XX_L4_CORE_BASE + 0x2000)
+#define CONTROL_PADCONF_CORE (CTRL_BASE + 0x0800)
+#define CONTROL_PADCONF_WKUP (OMAP54XX_L4_WKUP_BASE + 0xc800)
+
+/* LPDDR2 IO regs. To be verified */
+#define LPDDR2_IO_REGS_BASE 0x4A100638
+
+/* CONTROL_ID_CODE */
+#define CONTROL_ID_CODE (CTRL_BASE + 0x204)
+
+/* To be verified */
+#define OMAP5_CONTROL_ID_CODE_ES1_0 0x0B85202F
+
+/* STD_FUSE_PROD_ID_1 */
+#define STD_FUSE_PROD_ID_1 (CTRL_BASE + 0x218)
+#define PROD_ID_1_SILICON_TYPE_SHIFT 16
+#define PROD_ID_1_SILICON_TYPE_MASK (3 << 16)
+
+/* UART */
+#define UART1_BASE (OMAP54XX_L4_PER_BASE + 0x6a000)
+#define UART2_BASE (OMAP54XX_L4_PER_BASE + 0x6c000)
+#define UART3_BASE (OMAP54XX_L4_PER_BASE + 0x20000)
+
+/* General Purpose Timers */
+#define GPT1_BASE (OMAP54XX_L4_WKUP_BASE + 0x18000)
+#define GPT2_BASE (OMAP54XX_L4_PER_BASE + 0x32000)
+#define GPT3_BASE (OMAP54XX_L4_PER_BASE + 0x34000)
+
+/* Watchdog Timer2 - MPU watchdog */
+#define WDT2_BASE (OMAP54XX_L4_WKUP_BASE + 0x14000)
+
+/* 32KTIMER */
+#define SYNC_32KTIMER_BASE (OMAP54XX_L4_WKUP_BASE + 0x4000)
+
+/* GPMC */
+#define OMAP54XX_GPMC_BASE 0x50000000
+
+/* SYSTEM CONTROL MODULE */
+#define SYSCTRL_GENERAL_CORE_BASE 0x4A002000
+
+/*
+ * Hardware Register Details
+ */
+
+/* Watchdog Timer */
+#define WD_UNLOCK1 0xAAAA
+#define WD_UNLOCK2 0x5555
+
+/* GP Timer */
+#define TCLR_ST (0x1 << 0)
+#define TCLR_AR (0x1 << 1)
+#define TCLR_PRE (0x1 << 5)
+
+/*
+ * PRCM
+ */
+
+/* PRM */
+#define PRM_BASE 0x4AE06000
+#define PRM_DEVICE_BASE (PRM_BASE + 0x1B00)
+
+#define PRM_RSTCTRL PRM_DEVICE_BASE
+#define PRM_RSTCTRL_RESET 0x01
+
+/* Control Module */
+#define LDOSRAM_ACTMODE_VSET_IN_MASK (0x1F << 5)
+#define LDOSRAM_VOLT_CTRL_OVERRIDE 0x0401040f
+#define CONTROL_EFUSE_1_OVERRIDE 0x1C4D0110
+#define CONTROL_EFUSE_2_OVERRIDE 0x00084000
+
+/* LPDDR2 IO regs */
+#define CONTROL_LPDDR2IO_SLEW_125PS_DRV8_PULL_DOWN 0x1C1C1C1C
+#define CONTROL_LPDDR2IO_SLEW_325PS_DRV8_GATE_KEEPER 0x9E9E9E9E
+#define CONTROL_LPDDR2IO_SLEW_315PS_DRV12_PULL_DOWN 0x7C7C7C7C
+#define LPDDR2IO_GR10_WD_MASK (3 << 17)
+#define CONTROL_LPDDR2IO_3_VAL 0xA0888C00
+
+/* CONTROL_EFUSE_2 */
+#define CONTROL_EFUSE_2_NMOS_PMOS_PTV_CODE_1 0x00ffc000
+
+#define MMC1_PWRDNZ (1 << 26)
+#define MMC1_PBIASLITE_PWRDNZ (1 << 22)
+#define MMC1_PBIASLITE_VMODE (1 << 21)
+
+#ifndef __ASSEMBLY__
+
+struct s32ktimer {
+ unsigned char res[0x10];
+ unsigned int s32k_cr; /* 0x10 */
+};
+
+struct omap4_sys_ctrl_regs {
+ unsigned int pad1[129];
+ unsigned int control_id_code; /* 0x4A002204 */
+ unsigned int pad11[22];
+ unsigned int control_std_fuse_opp_bgap; /* 0x4a002260 */
+ unsigned int pad2[47];
+ unsigned int control_ldosram_iva_voltage_ctrl; /* 0x4A002320 */
+ unsigned int control_ldosram_mpu_voltage_ctrl; /* 0x4A002324 */
+ unsigned int control_ldosram_core_voltage_ctrl; /* 0x4A002328 */
+ unsigned int pad3[260277];
+ unsigned int control_pbiaslite; /* 0x4A100600 */
+ unsigned int pad4[63];
+ unsigned int control_efuse_1; /* 0x4A100700 */
+ unsigned int control_efuse_2; /* 0x4A100704 */
+};
+
+struct control_lpddr2io_regs {
+ unsigned int control_lpddr2io1_0;
+ unsigned int control_lpddr2io1_1;
+ unsigned int control_lpddr2io1_2;
+ unsigned int control_lpddr2io1_3;
+ unsigned int control_lpddr2io2_0;
+ unsigned int control_lpddr2io2_1;
+ unsigned int control_lpddr2io2_2;
+ unsigned int control_lpddr2io2_3;
+};
+#endif /* __ASSEMBLY__ */
+
+/*
+ * Non-secure SRAM Addresses
+ * Non-secure RAM starts at 0x40300000 for GP devices. But we keep SRAM_BASE
+ * at 0x40304000(EMU base) so that our code works for both EMU and GP
+ */
+#define NON_SECURE_SRAM_START 0x40304000
+#define NON_SECURE_SRAM_END 0x40320000 /* Not inclusive */
+/* base address for indirect vectors (internal boot mode) */
+#define SRAM_ROM_VECT_BASE 0x4031F000
+/* Temporary SRAM stack used while low level init is done */
+#define LOW_LEVEL_SRAM_STACK NON_SECURE_SRAM_END
+
+#define SRAM_SCRATCH_SPACE_ADDR NON_SECURE_SRAM_START
+/*
+ * SRAM scratch space entries
+ */
+#define OMAP5_SRAM_SCRATCH_OMAP5_REV SRAM_SCRATCH_SPACE_ADDR
+#define OMAP5_SRAM_SCRATCH_EMIF_SIZE (SRAM_SCRATCH_SPACE_ADDR + 0x4)
+#define OMAP5_SRAM_SCRATCH_EMIF_T_NUM (SRAM_SCRATCH_SPACE_ADDR + 0xC)
+#define OMAP5_SRAM_SCRATCH_EMIF_T_DEN (SRAM_SCRATCH_SPACE_ADDR + 0x10)
+#define OMAP5_SRAM_SCRATCH_SPACE_END (SRAM_SCRATCH_SPACE_ADDR + 0x14)
+
+/* Silicon revisions */
+#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF
+#define OMAP4430_ES1_0 0x44300100
+#define OMAP4430_ES2_0 0x44300200
+#define OMAP4430_ES2_1 0x44300210
+#define OMAP4430_ES2_2 0x44300220
+#define OMAP4430_ES2_3 0x44300230
+#define OMAP4460_ES1_0 0x44600100
+#define OMAP4460_ES1_1 0x44600110
+
+/* ROM code defines */
+/* Boot device */
+#define BOOT_DEVICE_MASK 0xFF
+#define BOOT_DEVICE_OFFSET 0x8
+#define DEV_DESC_PTR_OFFSET 0x4
+#define DEV_DATA_PTR_OFFSET 0x18
+#define BOOT_MODE_OFFSET 0x8
+#define RESET_REASON_OFFSET 0x9
+#define CH_FLAGS_OFFSET 0xA
+
+#define CH_FLAGS_CHSETTINGS (0x1 << 0)
+#define CH_FLAGS_CHRAM (0x1 << 1)
+#define CH_FLAGS_CHFLASH (0x1 << 2)
+#define CH_FLAGS_CHMMCSD (0x1 << 3)
+
+#ifndef __ASSEMBLY__
+struct omap_boot_parameters {
+ char *boot_message;
+ unsigned int mem_boot_descriptor;
+ unsigned char omap_bootdevice;
+ unsigned char reset_reason;
+ unsigned char ch_flags;
+};
+#endif /* __ASSEMBLY__ */
+#endif
diff --git a/arch/arm/include/asm/arch-omap5/sys_proto.h b/arch/arm/include/asm/arch-omap5/sys_proto.h
new file mode 100644
index 0000000..c31e18c
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap5/sys_proto.h
@@ -0,0 +1,122 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+#include <asm/arch/omap.h>
+#include <asm/io.h>
+#include <asm/arch/clocks.h>
+#include <asm/omap_common.h>
+#include <asm/arch/mux_omap5.h>
+#include <asm/arch/clocks.h>
+
+struct omap_sysinfo {
+ char *board_string;
+};
+extern const struct omap_sysinfo sysinfo;
+
+void gpmc_init(void);
+void watchdog_init(void);
+u32 get_device_type(void);
+void do_set_mux(u32 base, struct pad_conf_entry const *array, int size);
+void set_muxconf_regs_essential(void);
+void set_muxconf_regs_non_essential(void);
+void sr32(void *, u32, u32, u32);
+u32 wait_on_value(u32, u32, void *, u32);
+void sdelay(unsigned long);
+void omap_rev_string(char *omap_rev_string);
+void setup_clocks_for_console(void);
+void prcm_init(void);
+void bypass_dpll(u32 *const base);
+void freq_update_core(void);
+u32 get_sys_clk_freq(void);
+u32 omap5_ddr_clk(void);
+void cancel_out(u32 *num, u32 *den, u32 den_limit);
+void sdram_init(void);
+u32 omap_sdram_size(void);
+u32 cortex_rev(void);
+void init_omap_revision(void);
+void do_io_settings(void);
+
+/*
+ * This is used to verify if the configuration header
+ * was executed by Romcode prior to control of transfer
+ * to the bootloader. SPL is responsible for saving and
+ * passing this to the u-boot.
+ */
+extern struct omap_boot_parameters boot_params;
+
+static inline u32 running_from_sdram(void)
+{
+ u32 pc;
+ asm volatile ("mov %0, pc" : "=r" (pc));
+ return ((pc >= OMAP54XX_DRAM_ADDR_SPACE_START) &&
+ (pc < OMAP54XX_DRAM_ADDR_SPACE_END));
+}
+
+static inline u8 uboot_loaded_by_spl(void)
+{
+ /*
+ * u-boot can be running from sdram either because of configuration
+ * Header or by SPL. If because of CH, then the romcode sets the
+ * CHSETTINGS executed bit to true in the boot parameter structure that
+ * it passes to the bootloader.This parameter is stored in the ch_flags
+ * variable by both SPL and u-boot.Check out for CHSETTINGS, which is a
+ * mandatory section if CH is present.
+ */
+ if ((boot_params.ch_flags) & (CH_FLAGS_CHSETTINGS))
+ return 0;
+ else
+ return running_from_sdram();
+}
+/*
+ * The basic hardware init of OMAP(s_init()) can happen in 4
+ * different contexts:
+ * 1. SPL running from SRAM
+ * 2. U-Boot running from FLASH
+ * 3. Non-XIP U-Boot loaded to SDRAM by SPL
+ * 4. Non-XIP U-Boot loaded to SDRAM by ROM code using the
+ * Configuration Header feature
+ *
+ * This function finds this context.
+ * Defining as inline may help in compiling out unused functions in SPL
+ */
+static inline u32 omap_hw_init_context(void)
+{
+#ifdef CONFIG_SPL_BUILD
+ return OMAP_INIT_CONTEXT_SPL;
+#else
+ if (uboot_loaded_by_spl())
+ return OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL;
+ else if (running_from_sdram())
+ return OMAP_INIT_CONTEXT_UBOOT_AFTER_CH;
+ else
+ return OMAP_INIT_CONTEXT_UBOOT_FROM_NOR;
+#endif
+}
+
+static inline u32 omap_revision(void)
+{
+ extern u32 *const omap5_revision;
+ return *omap5_revision;
+}
+
+#endif
diff --git a/arch/arm/include/asm/arch-pxa/pxa-regs.h b/arch/arm/include/asm/arch-pxa/pxa-regs.h
index 109fdc0..52c79a9 100644
--- a/arch/arm/include/asm/arch-pxa/pxa-regs.h
+++ b/arch/arm/include/asm/arch-pxa/pxa-regs.h
@@ -315,117 +315,6 @@ typedef void (*ExcpHndlr) (void) ;
/******************************************************************************/
/*
- * UARTs
- */
-/* Full Function UART (FFUART) */
-#define FFUART FFRBR
-#define FFRBR 0x40100000 /* Receive Buffer Register (read only) */
-#define FFTHR 0x40100000 /* Transmit Holding Register (write only) */
-#define FFIER 0x40100004 /* Interrupt Enable Register (read/write) */
-#define FFIIR 0x40100008 /* Interrupt ID Register (read only) */
-#define FFFCR 0x40100008 /* FIFO Control Register (write only) */
-#define FFLCR 0x4010000C /* Line Control Register (read/write) */
-#define FFMCR 0x40100010 /* Modem Control Register (read/write) */
-#define FFLSR 0x40100014 /* Line Status Register (read only) */
-#define FFMSR 0x40100018 /* Modem Status Register (read only) */
-#define FFSPR 0x4010001C /* Scratch Pad Register (read/write) */
-#define FFISR 0x40100020 /* Infrared Selection Register (read/write) */
-#define FFDLL 0x40100000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define FFDLH 0x40100004 /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Bluetooth UART (BTUART) */
-#define BTUART BTRBR
-#define BTRBR 0x40200000 /* Receive Buffer Register (read only) */
-#define BTTHR 0x40200000 /* Transmit Holding Register (write only) */
-#define BTIER 0x40200004 /* Interrupt Enable Register (read/write) */
-#define BTIIR 0x40200008 /* Interrupt ID Register (read only) */
-#define BTFCR 0x40200008 /* FIFO Control Register (write only) */
-#define BTLCR 0x4020000C /* Line Control Register (read/write) */
-#define BTMCR 0x40200010 /* Modem Control Register (read/write) */
-#define BTLSR 0x40200014 /* Line Status Register (read only) */
-#define BTMSR 0x40200018 /* Modem Status Register (read only) */
-#define BTSPR 0x4020001C /* Scratch Pad Register (read/write) */
-#define BTISR 0x40200020 /* Infrared Selection Register (read/write) */
-#define BTDLL 0x40200000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define BTDLH 0x40200004 /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-/* Standard UART (STUART) */
-#define STUART STRBR
-#define STRBR 0x40700000 /* Receive Buffer Register (read only) */
-#define STTHR 0x40700000 /* Transmit Holding Register (write only) */
-#define STIER 0x40700004 /* Interrupt Enable Register (read/write) */
-#define STIIR 0x40700008 /* Interrupt ID Register (read only) */
-#define STFCR 0x40700008 /* FIFO Control Register (write only) */
-#define STLCR 0x4070000C /* Line Control Register (read/write) */
-#define STMCR 0x40700010 /* Modem Control Register (read/write) */
-#define STLSR 0x40700014 /* Line Status Register (read only) */
-#define STMSR 0x40700018 /* Reserved */
-#define STSPR 0x4070001C /* Scratch Pad Register (read/write) */
-#define STISR 0x40700020 /* Infrared Selection Register (read/write) */
-#define STDLL 0x40700000 /* Divisor Latch Low Register (DLAB = 1) (read/write) */
-#define STDLH 0x40700004 /* Divisor Latch High Register (DLAB = 1) (read/write) */
-
-#define IER_DMAE (1 << 7) /* DMA Requests Enable */
-#define IER_UUE (1 << 6) /* UART Unit Enable */
-#define IER_NRZE (1 << 5) /* NRZ coding Enable */
-#define IER_RTIOE (1 << 4) /* Receiver Time Out Interrupt Enable */
-#define IER_MIE (1 << 3) /* Modem Interrupt Enable */
-#define IER_RLSE (1 << 2) /* Receiver Line Status Interrupt Enable */
-#define IER_TIE (1 << 1) /* Transmit Data request Interrupt Enable */
-#define IER_RAVIE (1 << 0) /* Receiver Data Available Interrupt Enable */
-
-#define IIR_FIFOES1 (1 << 7) /* FIFO Mode Enable Status */
-#define IIR_FIFOES0 (1 << 6) /* FIFO Mode Enable Status */
-#define IIR_TOD (1 << 3) /* Time Out Detected */
-#define IIR_IID2 (1 << 2) /* Interrupt Source Encoded */
-#define IIR_IID1 (1 << 1) /* Interrupt Source Encoded */
-#define IIR_IP (1 << 0) /* Interrupt Pending (active low) */
-
-#define FCR_ITL2 (1 << 7) /* Interrupt Trigger Level */
-#define FCR_ITL1 (1 << 6) /* Interrupt Trigger Level */
-#define FCR_RESETTF (1 << 2) /* Reset Transmitter FIFO */
-#define FCR_RESETRF (1 << 1) /* Reset Receiver FIFO */
-#define FCR_TRFIFOE (1 << 0) /* Transmit and Receive FIFO Enable */
-#define FCR_ITL_1 (0)
-#define FCR_ITL_8 (FCR_ITL1)
-#define FCR_ITL_16 (FCR_ITL2)
-#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
-
-#define LCR_DLAB (1 << 7) /* Divisor Latch Access Bit */
-#define LCR_SB (1 << 6) /* Set Break */
-#define LCR_STKYP (1 << 5) /* Sticky Parity */
-#define LCR_EPS (1 << 4) /* Even Parity Select */
-#define LCR_PEN (1 << 3) /* Parity Enable */
-#define LCR_STB (1 << 2) /* Stop Bit */
-#define LCR_WLS1 (1 << 1) /* Word Length Select */
-#define LCR_WLS0 (1 << 0) /* Word Length Select */
-
-#define LSR_FIFOE (1 << 7) /* FIFO Error Status */
-#define LSR_TEMT (1 << 6) /* Transmitter Empty */
-#define LSR_TDRQ (1 << 5) /* Transmit Data Request */
-#define LSR_BI (1 << 4) /* Break Interrupt */
-#define LSR_FE (1 << 3) /* Framing Error */
-#define LSR_PE (1 << 2) /* Parity Error */
-#define LSR_OE (1 << 1) /* Overrun Error */
-#define LSR_DR (1 << 0) /* Data Ready */
-
-#define MCR_LOOP (1 << 4) /* */
-#define MCR_OUT2 (1 << 3) /* force MSR_DCD in loopback mode */
-#define MCR_OUT1 (1 << 2) /* force MSR_RI in loopback mode */
-#define MCR_RTS (1 << 1) /* Request to Send */
-#define MCR_DTR (1 << 0) /* Data Terminal Ready */
-
-#define MSR_DCD (1 << 7) /* Data Carrier Detect */
-#define MSR_RI (1 << 6) /* Ring Indicator */
-#define MSR_DSR (1 << 5) /* Data Set Ready */
-#define MSR_CTS (1 << 4) /* Clear To Send */
-#define MSR_DDCD (1 << 3) /* Delta Data Carrier Detect */
-#define MSR_TERI (1 << 2) /* Trailing Edge Ring Indicator */
-#define MSR_DDSR (1 << 1) /* Delta Data Set Ready */
-#define MSR_DCTS (1 << 0) /* Delta Clear To Send */
-
-/******************************************************************************/
-/*
* IrSR (Infrared Selection Register)
*/
#define IrSR_OFFSET 0x20
diff --git a/arch/arm/include/asm/arch-pxa/regs-uart.h b/arch/arm/include/asm/arch-pxa/regs-uart.h
new file mode 100644
index 0000000..355e892
--- /dev/null
+++ b/arch/arm/include/asm/arch-pxa/regs-uart.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __REGS_UART_H__
+#define __REGS_UART_H__
+
+#define FFUART_BASE 0x40100000
+#define BTUART_BASE 0x40200000
+#define STUART_BASE 0x40700000
+#define HWUART_BASE 0x41600000
+
+struct pxa_uart_regs {
+ union {
+ uint32_t thr;
+ uint32_t rbr;
+ uint32_t dll;
+ };
+ union {
+ uint32_t ier;
+ uint32_t dlh;
+ };
+ union {
+ uint32_t fcr;
+ uint32_t iir;
+ };
+ uint32_t lcr;
+ uint32_t mcr;
+ uint32_t lsr;
+ uint32_t msr;
+ uint32_t spr;
+ uint32_t isr;
+};
+
+#define IER_DMAE (1 << 7)
+#define IER_UUE (1 << 6)
+#define IER_NRZE (1 << 5)
+#define IER_RTIOE (1 << 4)
+#define IER_MIE (1 << 3)
+#define IER_RLSE (1 << 2)
+#define IER_TIE (1 << 1)
+#define IER_RAVIE (1 << 0)
+
+#define IIR_FIFOES1 (1 << 7)
+#define IIR_FIFOES0 (1 << 6)
+#define IIR_TOD (1 << 3)
+#define IIR_IID2 (1 << 2)
+#define IIR_IID1 (1 << 1)
+#define IIR_IP (1 << 0)
+
+#define FCR_ITL2 (1 << 7)
+#define FCR_ITL1 (1 << 6)
+#define FCR_RESETTF (1 << 2)
+#define FCR_RESETRF (1 << 1)
+#define FCR_TRFIFOE (1 << 0)
+#define FCR_ITL_1 0
+#define FCR_ITL_8 (FCR_ITL1)
+#define FCR_ITL_16 (FCR_ITL2)
+#define FCR_ITL_32 (FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB (1 << 7)
+#define LCR_SB (1 << 6)
+#define LCR_STKYP (1 << 5)
+#define LCR_EPS (1 << 4)
+#define LCR_PEN (1 << 3)
+#define LCR_STB (1 << 2)
+#define LCR_WLS1 (1 << 1)
+#define LCR_WLS0 (1 << 0)
+
+#define LSR_FIFOE (1 << 7)
+#define LSR_TEMT (1 << 6)
+#define LSR_TDRQ (1 << 5)
+#define LSR_BI (1 << 4)
+#define LSR_FE (1 << 3)
+#define LSR_PE (1 << 2)
+#define LSR_OE (1 << 1)
+#define LSR_DR (1 << 0)
+
+#define MCR_LOOP (1 << 4)
+#define MCR_OUT2 (1 << 3)
+#define MCR_OUT1 (1 << 2)
+#define MCR_RTS (1 << 1)
+#define MCR_DTR (1 << 0)
+
+#define MSR_DCD (1 << 7)
+#define MSR_RI (1 << 6)
+#define MSR_DSR (1 << 5)
+#define MSR_CTS (1 << 4)
+#define MSR_DDCD (1 << 3)
+#define MSR_TERI (1 << 2)
+#define MSR_DDSR (1 << 1)
+#define MSR_DCTS (1 << 0)
+
+#endif /* __REGS_UART_H__ */
diff --git a/arch/arm/include/asm/armv7.h b/arch/arm/include/asm/armv7.h
index 9adc563..ad9a875 100644
--- a/arch/arm/include/asm/armv7.h
+++ b/arch/arm/include/asm/armv7.h
@@ -31,6 +31,9 @@
#define MIDR_CORTEX_A9_R1P3 0x411FC093
#define MIDR_CORTEX_A9_R2P10 0x412FC09A
+/* Cortex-A15 revisions */
+#define MIDR_CORTEX_A15_R0P0 0x410FC0F0
+
/* CCSIDR */
#define CCSIDR_LINE_SIZE_OFFSET 0
#define CCSIDR_LINE_SIZE_MASK 0x7
diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h
new file mode 100644
index 0000000..e5c7d2c
--- /dev/null
+++ b/arch/arm/include/asm/emif.h
@@ -0,0 +1,1035 @@
+/*
+ * OMAP44xx EMIF header
+ *
+ * Copyright (C) 2009-2010 Texas Instruments, Inc.
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _EMIF_H_
+#define _EMIF_H_
+#include <asm/types.h>
+#include <common.h>
+
+/* Base address */
+#define EMIF1_BASE 0x4c000000
+#define EMIF2_BASE 0x4d000000
+
+/* Registers shifts and masks */
+
+/* EMIF_MOD_ID_REV */
+#define EMIF_REG_SCHEME_SHIFT 30
+#define EMIF_REG_SCHEME_MASK (0x3 << 30)
+#define EMIF_REG_MODULE_ID_SHIFT 16
+#define EMIF_REG_MODULE_ID_MASK (0xfff << 16)
+#define EMIF_REG_RTL_VERSION_SHIFT 11
+#define EMIF_REG_RTL_VERSION_MASK (0x1f << 11)
+#define EMIF_REG_MAJOR_REVISION_SHIFT 8
+#define EMIF_REG_MAJOR_REVISION_MASK (0x7 << 8)
+#define EMIF_REG_MINOR_REVISION_SHIFT 0
+#define EMIF_REG_MINOR_REVISION_MASK (0x3f << 0)
+
+/* STATUS */
+#define EMIF_REG_BE_SHIFT 31
+#define EMIF_REG_BE_MASK (1 << 31)
+#define EMIF_REG_DUAL_CLK_MODE_SHIFT 30
+#define EMIF_REG_DUAL_CLK_MODE_MASK (1 << 30)
+#define EMIF_REG_FAST_INIT_SHIFT 29
+#define EMIF_REG_FAST_INIT_MASK (1 << 29)
+#define EMIF_REG_PHY_DLL_READY_SHIFT 2
+#define EMIF_REG_PHY_DLL_READY_MASK (1 << 2)
+
+/* SDRAM_CONFIG */
+#define EMIF_REG_SDRAM_TYPE_SHIFT 29
+#define EMIF_REG_SDRAM_TYPE_MASK (0x7 << 29)
+#define EMIF_REG_IBANK_POS_SHIFT 27
+#define EMIF_REG_IBANK_POS_MASK (0x3 << 27)
+#define EMIF_REG_DDR_TERM_SHIFT 24
+#define EMIF_REG_DDR_TERM_MASK (0x7 << 24)
+#define EMIF_REG_DDR2_DDQS_SHIFT 23
+#define EMIF_REG_DDR2_DDQS_MASK (1 << 23)
+#define EMIF_REG_DYN_ODT_SHIFT 21
+#define EMIF_REG_DYN_ODT_MASK (0x3 << 21)
+#define EMIF_REG_DDR_DISABLE_DLL_SHIFT 20
+#define EMIF_REG_DDR_DISABLE_DLL_MASK (1 << 20)
+#define EMIF_REG_SDRAM_DRIVE_SHIFT 18
+#define EMIF_REG_SDRAM_DRIVE_MASK (0x3 << 18)
+#define EMIF_REG_CWL_SHIFT 16
+#define EMIF_REG_CWL_MASK (0x3 << 16)
+#define EMIF_REG_NARROW_MODE_SHIFT 14
+#define EMIF_REG_NARROW_MODE_MASK (0x3 << 14)
+#define EMIF_REG_CL_SHIFT 10
+#define EMIF_REG_CL_MASK (0xf << 10)
+#define EMIF_REG_ROWSIZE_SHIFT 7
+#define EMIF_REG_ROWSIZE_MASK (0x7 << 7)
+#define EMIF_REG_IBANK_SHIFT 4
+#define EMIF_REG_IBANK_MASK (0x7 << 4)
+#define EMIF_REG_EBANK_SHIFT 3
+#define EMIF_REG_EBANK_MASK (1 << 3)
+#define EMIF_REG_PAGESIZE_SHIFT 0
+#define EMIF_REG_PAGESIZE_MASK (0x7 << 0)
+
+/* SDRAM_CONFIG_2 */
+#define EMIF_REG_CS1NVMEN_SHIFT 30
+#define EMIF_REG_CS1NVMEN_MASK (1 << 30)
+#define EMIF_REG_EBANK_POS_SHIFT 27
+#define EMIF_REG_EBANK_POS_MASK (1 << 27)
+#define EMIF_REG_RDBNUM_SHIFT 4
+#define EMIF_REG_RDBNUM_MASK (0x3 << 4)
+#define EMIF_REG_RDBSIZE_SHIFT 0
+#define EMIF_REG_RDBSIZE_MASK (0x7 << 0)
+
+/* SDRAM_REF_CTRL */
+#define EMIF_REG_INITREF_DIS_SHIFT 31
+#define EMIF_REG_INITREF_DIS_MASK (1 << 31)
+#define EMIF_REG_SRT_SHIFT 29
+#define EMIF_REG_SRT_MASK (1 << 29)
+#define EMIF_REG_ASR_SHIFT 28
+#define EMIF_REG_ASR_MASK (1 << 28)
+#define EMIF_REG_PASR_SHIFT 24
+#define EMIF_REG_PASR_MASK (0x7 << 24)
+#define EMIF_REG_REFRESH_RATE_SHIFT 0
+#define EMIF_REG_REFRESH_RATE_MASK (0xffff << 0)
+
+/* SDRAM_REF_CTRL_SHDW */
+#define EMIF_REG_REFRESH_RATE_SHDW_SHIFT 0
+#define EMIF_REG_REFRESH_RATE_SHDW_MASK (0xffff << 0)
+
+/* SDRAM_TIM_1 */
+#define EMIF_REG_T_RP_SHIFT 25
+#define EMIF_REG_T_RP_MASK (0xf << 25)
+#define EMIF_REG_T_RCD_SHIFT 21
+#define EMIF_REG_T_RCD_MASK (0xf << 21)
+#define EMIF_REG_T_WR_SHIFT 17
+#define EMIF_REG_T_WR_MASK (0xf << 17)
+#define EMIF_REG_T_RAS_SHIFT 12
+#define EMIF_REG_T_RAS_MASK (0x1f << 12)
+#define EMIF_REG_T_RC_SHIFT 6
+#define EMIF_REG_T_RC_MASK (0x3f << 6)
+#define EMIF_REG_T_RRD_SHIFT 3
+#define EMIF_REG_T_RRD_MASK (0x7 << 3)
+#define EMIF_REG_T_WTR_SHIFT 0
+#define EMIF_REG_T_WTR_MASK (0x7 << 0)
+
+/* SDRAM_TIM_1_SHDW */
+#define EMIF_REG_T_RP_SHDW_SHIFT 25
+#define EMIF_REG_T_RP_SHDW_MASK (0xf << 25)
+#define EMIF_REG_T_RCD_SHDW_SHIFT 21
+#define EMIF_REG_T_RCD_SHDW_MASK (0xf << 21)
+#define EMIF_REG_T_WR_SHDW_SHIFT 17
+#define EMIF_REG_T_WR_SHDW_MASK (0xf << 17)
+#define EMIF_REG_T_RAS_SHDW_SHIFT 12
+#define EMIF_REG_T_RAS_SHDW_MASK (0x1f << 12)
+#define EMIF_REG_T_RC_SHDW_SHIFT 6
+#define EMIF_REG_T_RC_SHDW_MASK (0x3f << 6)
+#define EMIF_REG_T_RRD_SHDW_SHIFT 3
+#define EMIF_REG_T_RRD_SHDW_MASK (0x7 << 3)
+#define EMIF_REG_T_WTR_SHDW_SHIFT 0
+#define EMIF_REG_T_WTR_SHDW_MASK (0x7 << 0)
+
+/* SDRAM_TIM_2 */
+#define EMIF_REG_T_XP_SHIFT 28
+#define EMIF_REG_T_XP_MASK (0x7 << 28)
+#define EMIF_REG_T_ODT_SHIFT 25
+#define EMIF_REG_T_ODT_MASK (0x7 << 25)
+#define EMIF_REG_T_XSNR_SHIFT 16
+#define EMIF_REG_T_XSNR_MASK (0x1ff << 16)
+#define EMIF_REG_T_XSRD_SHIFT 6
+#define EMIF_REG_T_XSRD_MASK (0x3ff << 6)
+#define EMIF_REG_T_RTP_SHIFT 3
+#define EMIF_REG_T_RTP_MASK (0x7 << 3)
+#define EMIF_REG_T_CKE_SHIFT 0
+#define EMIF_REG_T_CKE_MASK (0x7 << 0)
+
+/* SDRAM_TIM_2_SHDW */
+#define EMIF_REG_T_XP_SHDW_SHIFT 28
+#define EMIF_REG_T_XP_SHDW_MASK (0x7 << 28)
+#define EMIF_REG_T_ODT_SHDW_SHIFT 25
+#define EMIF_REG_T_ODT_SHDW_MASK (0x7 << 25)
+#define EMIF_REG_T_XSNR_SHDW_SHIFT 16
+#define EMIF_REG_T_XSNR_SHDW_MASK (0x1ff << 16)
+#define EMIF_REG_T_XSRD_SHDW_SHIFT 6
+#define EMIF_REG_T_XSRD_SHDW_MASK (0x3ff << 6)
+#define EMIF_REG_T_RTP_SHDW_SHIFT 3
+#define EMIF_REG_T_RTP_SHDW_MASK (0x7 << 3)
+#define EMIF_REG_T_CKE_SHDW_SHIFT 0
+#define EMIF_REG_T_CKE_SHDW_MASK (0x7 << 0)
+
+/* SDRAM_TIM_3 */
+#define EMIF_REG_T_CKESR_SHIFT 21
+#define EMIF_REG_T_CKESR_MASK (0x7 << 21)
+#define EMIF_REG_ZQ_ZQCS_SHIFT 15
+#define EMIF_REG_ZQ_ZQCS_MASK (0x3f << 15)
+#define EMIF_REG_T_TDQSCKMAX_SHIFT 13
+#define EMIF_REG_T_TDQSCKMAX_MASK (0x3 << 13)
+#define EMIF_REG_T_RFC_SHIFT 4
+#define EMIF_REG_T_RFC_MASK (0x1ff << 4)
+#define EMIF_REG_T_RAS_MAX_SHIFT 0
+#define EMIF_REG_T_RAS_MAX_MASK (0xf << 0)
+
+/* SDRAM_TIM_3_SHDW */
+#define EMIF_REG_T_CKESR_SHDW_SHIFT 21
+#define EMIF_REG_T_CKESR_SHDW_MASK (0x7 << 21)
+#define EMIF_REG_ZQ_ZQCS_SHDW_SHIFT 15
+#define EMIF_REG_ZQ_ZQCS_SHDW_MASK (0x3f << 15)
+#define EMIF_REG_T_TDQSCKMAX_SHDW_SHIFT 13
+#define EMIF_REG_T_TDQSCKMAX_SHDW_MASK (0x3 << 13)
+#define EMIF_REG_T_RFC_SHDW_SHIFT 4
+#define EMIF_REG_T_RFC_SHDW_MASK (0x1ff << 4)
+#define EMIF_REG_T_RAS_MAX_SHDW_SHIFT 0
+#define EMIF_REG_T_RAS_MAX_SHDW_MASK (0xf << 0)
+
+/* LPDDR2_NVM_TIM */
+#define EMIF_REG_NVM_T_XP_SHIFT 28
+#define EMIF_REG_NVM_T_XP_MASK (0x7 << 28)
+#define EMIF_REG_NVM_T_WTR_SHIFT 24
+#define EMIF_REG_NVM_T_WTR_MASK (0x7 << 24)
+#define EMIF_REG_NVM_T_RP_SHIFT 20
+#define EMIF_REG_NVM_T_RP_MASK (0xf << 20)
+#define EMIF_REG_NVM_T_WRA_SHIFT 16
+#define EMIF_REG_NVM_T_WRA_MASK (0xf << 16)
+#define EMIF_REG_NVM_T_RRD_SHIFT 8
+#define EMIF_REG_NVM_T_RRD_MASK (0xff << 8)
+#define EMIF_REG_NVM_T_RCDMIN_SHIFT 0
+#define EMIF_REG_NVM_T_RCDMIN_MASK (0xff << 0)
+
+/* LPDDR2_NVM_TIM_SHDW */
+#define EMIF_REG_NVM_T_XP_SHDW_SHIFT 28
+#define EMIF_REG_NVM_T_XP_SHDW_MASK (0x7 << 28)
+#define EMIF_REG_NVM_T_WTR_SHDW_SHIFT 24
+#define EMIF_REG_NVM_T_WTR_SHDW_MASK (0x7 << 24)
+#define EMIF_REG_NVM_T_RP_SHDW_SHIFT 20
+#define EMIF_REG_NVM_T_RP_SHDW_MASK (0xf << 20)
+#define EMIF_REG_NVM_T_WRA_SHDW_SHIFT 16
+#define EMIF_REG_NVM_T_WRA_SHDW_MASK (0xf << 16)
+#define EMIF_REG_NVM_T_RRD_SHDW_SHIFT 8
+#define EMIF_REG_NVM_T_RRD_SHDW_MASK (0xff << 8)
+#define EMIF_REG_NVM_T_RCDMIN_SHDW_SHIFT 0
+#define EMIF_REG_NVM_T_RCDMIN_SHDW_MASK (0xff << 0)
+
+/* PWR_MGMT_CTRL */
+#define EMIF_REG_IDLEMODE_SHIFT 30
+#define EMIF_REG_IDLEMODE_MASK (0x3 << 30)
+#define EMIF_REG_PD_TIM_SHIFT 12
+#define EMIF_REG_PD_TIM_MASK (0xf << 12)
+#define EMIF_REG_DPD_EN_SHIFT 11
+#define EMIF_REG_DPD_EN_MASK (1 << 11)
+#define EMIF_REG_LP_MODE_SHIFT 8
+#define EMIF_REG_LP_MODE_MASK (0x7 << 8)
+#define EMIF_REG_SR_TIM_SHIFT 4
+#define EMIF_REG_SR_TIM_MASK (0xf << 4)
+#define EMIF_REG_CS_TIM_SHIFT 0
+#define EMIF_REG_CS_TIM_MASK (0xf << 0)
+
+/* PWR_MGMT_CTRL_SHDW */
+#define EMIF_REG_PD_TIM_SHDW_SHIFT 8
+#define EMIF_REG_PD_TIM_SHDW_MASK (0xf << 8)
+#define EMIF_REG_SR_TIM_SHDW_SHIFT 4
+#define EMIF_REG_SR_TIM_SHDW_MASK (0xf << 4)
+#define EMIF_REG_CS_TIM_SHDW_SHIFT 0
+#define EMIF_REG_CS_TIM_SHDW_MASK (0xf << 0)
+
+/* LPDDR2_MODE_REG_DATA */
+#define EMIF_REG_VALUE_0_SHIFT 0
+#define EMIF_REG_VALUE_0_MASK (0x7f << 0)
+
+/* LPDDR2_MODE_REG_CFG */
+#define EMIF_REG_CS_SHIFT 31
+#define EMIF_REG_CS_MASK (1 << 31)
+#define EMIF_REG_REFRESH_EN_SHIFT 30
+#define EMIF_REG_REFRESH_EN_MASK (1 << 30)
+#define EMIF_REG_ADDRESS_SHIFT 0
+#define EMIF_REG_ADDRESS_MASK (0xff << 0)
+
+/* OCP_CONFIG */
+#define EMIF_REG_SYS_THRESH_MAX_SHIFT 24
+#define EMIF_REG_SYS_THRESH_MAX_MASK (0xf << 24)
+#define EMIF_REG_MPU_THRESH_MAX_SHIFT 20
+#define EMIF_REG_MPU_THRESH_MAX_MASK (0xf << 20)
+#define EMIF_REG_LL_THRESH_MAX_SHIFT 16
+#define EMIF_REG_LL_THRESH_MAX_MASK (0xf << 16)
+#define EMIF_REG_PR_OLD_COUNT_SHIFT 0
+#define EMIF_REG_PR_OLD_COUNT_MASK (0xff << 0)
+
+/* OCP_CFG_VAL_1 */
+#define EMIF_REG_SYS_BUS_WIDTH_SHIFT 30
+#define EMIF_REG_SYS_BUS_WIDTH_MASK (0x3 << 30)
+#define EMIF_REG_LL_BUS_WIDTH_SHIFT 28
+#define EMIF_REG_LL_BUS_WIDTH_MASK (0x3 << 28)
+#define EMIF_REG_WR_FIFO_DEPTH_SHIFT 8
+#define EMIF_REG_WR_FIFO_DEPTH_MASK (0xff << 8)
+#define EMIF_REG_CMD_FIFO_DEPTH_SHIFT 0
+#define EMIF_REG_CMD_FIFO_DEPTH_MASK (0xff << 0)
+
+/* OCP_CFG_VAL_2 */
+#define EMIF_REG_RREG_FIFO_DEPTH_SHIFT 16
+#define EMIF_REG_RREG_FIFO_DEPTH_MASK (0xff << 16)
+#define EMIF_REG_RSD_FIFO_DEPTH_SHIFT 8
+#define EMIF_REG_RSD_FIFO_DEPTH_MASK (0xff << 8)
+#define EMIF_REG_RCMD_FIFO_DEPTH_SHIFT 0
+#define EMIF_REG_RCMD_FIFO_DEPTH_MASK (0xff << 0)
+
+/* IODFT_TLGC */
+#define EMIF_REG_TLEC_SHIFT 16
+#define EMIF_REG_TLEC_MASK (0xffff << 16)
+#define EMIF_REG_MT_SHIFT 14
+#define EMIF_REG_MT_MASK (1 << 14)
+#define EMIF_REG_ACT_CAP_EN_SHIFT 13
+#define EMIF_REG_ACT_CAP_EN_MASK (1 << 13)
+#define EMIF_REG_OPG_LD_SHIFT 12
+#define EMIF_REG_OPG_LD_MASK (1 << 12)
+#define EMIF_REG_RESET_PHY_SHIFT 10
+#define EMIF_REG_RESET_PHY_MASK (1 << 10)
+#define EMIF_REG_MMS_SHIFT 8
+#define EMIF_REG_MMS_MASK (1 << 8)
+#define EMIF_REG_MC_SHIFT 4
+#define EMIF_REG_MC_MASK (0x3 << 4)
+#define EMIF_REG_PC_SHIFT 1
+#define EMIF_REG_PC_MASK (0x7 << 1)
+#define EMIF_REG_TM_SHIFT 0
+#define EMIF_REG_TM_MASK (1 << 0)
+
+/* IODFT_CTRL_MISR_RSLT */
+#define EMIF_REG_DQM_TLMR_SHIFT 16
+#define EMIF_REG_DQM_TLMR_MASK (0x3ff << 16)
+#define EMIF_REG_CTL_TLMR_SHIFT 0
+#define EMIF_REG_CTL_TLMR_MASK (0x7ff << 0)
+
+/* IODFT_ADDR_MISR_RSLT */
+#define EMIF_REG_ADDR_TLMR_SHIFT 0
+#define EMIF_REG_ADDR_TLMR_MASK (0x1fffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_1 */
+#define EMIF_REG_DATA_TLMR_31_0_SHIFT 0
+#define EMIF_REG_DATA_TLMR_31_0_MASK (0xffffffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_2 */
+#define EMIF_REG_DATA_TLMR_63_32_SHIFT 0
+#define EMIF_REG_DATA_TLMR_63_32_MASK (0xffffffff << 0)
+
+/* IODFT_DATA_MISR_RSLT_3 */
+#define EMIF_REG_DATA_TLMR_66_64_SHIFT 0
+#define EMIF_REG_DATA_TLMR_66_64_MASK (0x7 << 0)
+
+/* PERF_CNT_1 */
+#define EMIF_REG_COUNTER1_SHIFT 0
+#define EMIF_REG_COUNTER1_MASK (0xffffffff << 0)
+
+/* PERF_CNT_2 */
+#define EMIF_REG_COUNTER2_SHIFT 0
+#define EMIF_REG_COUNTER2_MASK (0xffffffff << 0)
+
+/* PERF_CNT_CFG */
+#define EMIF_REG_CNTR2_MCONNID_EN_SHIFT 31
+#define EMIF_REG_CNTR2_MCONNID_EN_MASK (1 << 31)
+#define EMIF_REG_CNTR2_REGION_EN_SHIFT 30
+#define EMIF_REG_CNTR2_REGION_EN_MASK (1 << 30)
+#define EMIF_REG_CNTR2_CFG_SHIFT 16
+#define EMIF_REG_CNTR2_CFG_MASK (0xf << 16)
+#define EMIF_REG_CNTR1_MCONNID_EN_SHIFT 15
+#define EMIF_REG_CNTR1_MCONNID_EN_MASK (1 << 15)
+#define EMIF_REG_CNTR1_REGION_EN_SHIFT 14
+#define EMIF_REG_CNTR1_REGION_EN_MASK (1 << 14)
+#define EMIF_REG_CNTR1_CFG_SHIFT 0
+#define EMIF_REG_CNTR1_CFG_MASK (0xf << 0)
+
+/* PERF_CNT_SEL */
+#define EMIF_REG_MCONNID2_SHIFT 24
+#define EMIF_REG_MCONNID2_MASK (0xff << 24)
+#define EMIF_REG_REGION_SEL2_SHIFT 16
+#define EMIF_REG_REGION_SEL2_MASK (0x3 << 16)
+#define EMIF_REG_MCONNID1_SHIFT 8
+#define EMIF_REG_MCONNID1_MASK (0xff << 8)
+#define EMIF_REG_REGION_SEL1_SHIFT 0
+#define EMIF_REG_REGION_SEL1_MASK (0x3 << 0)
+
+/* PERF_CNT_TIM */
+#define EMIF_REG_TOTAL_TIME_SHIFT 0
+#define EMIF_REG_TOTAL_TIME_MASK (0xffffffff << 0)
+
+/* READ_IDLE_CTRL */
+#define EMIF_REG_READ_IDLE_LEN_SHIFT 16
+#define EMIF_REG_READ_IDLE_LEN_MASK (0xf << 16)
+#define EMIF_REG_READ_IDLE_INTERVAL_SHIFT 0
+#define EMIF_REG_READ_IDLE_INTERVAL_MASK (0x1ff << 0)
+
+/* READ_IDLE_CTRL_SHDW */
+#define EMIF_REG_READ_IDLE_LEN_SHDW_SHIFT 16
+#define EMIF_REG_READ_IDLE_LEN_SHDW_MASK (0xf << 16)
+#define EMIF_REG_READ_IDLE_INTERVAL_SHDW_SHIFT 0
+#define EMIF_REG_READ_IDLE_INTERVAL_SHDW_MASK (0x1ff << 0)
+
+/* IRQ_EOI */
+#define EMIF_REG_EOI_SHIFT 0
+#define EMIF_REG_EOI_MASK (1 << 0)
+
+/* IRQSTATUS_RAW_SYS */
+#define EMIF_REG_DNV_SYS_SHIFT 2
+#define EMIF_REG_DNV_SYS_MASK (1 << 2)
+#define EMIF_REG_TA_SYS_SHIFT 1
+#define EMIF_REG_TA_SYS_MASK (1 << 1)
+#define EMIF_REG_ERR_SYS_SHIFT 0
+#define EMIF_REG_ERR_SYS_MASK (1 << 0)
+
+/* IRQSTATUS_RAW_LL */
+#define EMIF_REG_DNV_LL_SHIFT 2
+#define EMIF_REG_DNV_LL_MASK (1 << 2)
+#define EMIF_REG_TA_LL_SHIFT 1
+#define EMIF_REG_TA_LL_MASK (1 << 1)
+#define EMIF_REG_ERR_LL_SHIFT 0
+#define EMIF_REG_ERR_LL_MASK (1 << 0)
+
+/* IRQSTATUS_SYS */
+
+/* IRQSTATUS_LL */
+
+/* IRQENABLE_SET_SYS */
+#define EMIF_REG_EN_DNV_SYS_SHIFT 2
+#define EMIF_REG_EN_DNV_SYS_MASK (1 << 2)
+#define EMIF_REG_EN_TA_SYS_SHIFT 1
+#define EMIF_REG_EN_TA_SYS_MASK (1 << 1)
+#define EMIF_REG_EN_ERR_SYS_SHIFT 0
+#define EMIF_REG_EN_ERR_SYS_MASK (1 << 0)
+
+/* IRQENABLE_SET_LL */
+#define EMIF_REG_EN_DNV_LL_SHIFT 2
+#define EMIF_REG_EN_DNV_LL_MASK (1 << 2)
+#define EMIF_REG_EN_TA_LL_SHIFT 1
+#define EMIF_REG_EN_TA_LL_MASK (1 << 1)
+#define EMIF_REG_EN_ERR_LL_SHIFT 0
+#define EMIF_REG_EN_ERR_LL_MASK (1 << 0)
+
+/* IRQENABLE_CLR_SYS */
+
+/* IRQENABLE_CLR_LL */
+
+/* ZQ_CONFIG */
+#define EMIF_REG_ZQ_CS1EN_SHIFT 31
+#define EMIF_REG_ZQ_CS1EN_MASK (1 << 31)
+#define EMIF_REG_ZQ_CS0EN_SHIFT 30
+#define EMIF_REG_ZQ_CS0EN_MASK (1 << 30)
+#define EMIF_REG_ZQ_DUALCALEN_SHIFT 29
+#define EMIF_REG_ZQ_DUALCALEN_MASK (1 << 29)
+#define EMIF_REG_ZQ_SFEXITEN_SHIFT 28
+#define EMIF_REG_ZQ_SFEXITEN_MASK (1 << 28)
+#define EMIF_REG_ZQ_ZQINIT_MULT_SHIFT 18
+#define EMIF_REG_ZQ_ZQINIT_MULT_MASK (0x3 << 18)
+#define EMIF_REG_ZQ_ZQCL_MULT_SHIFT 16
+#define EMIF_REG_ZQ_ZQCL_MULT_MASK (0x3 << 16)
+#define EMIF_REG_ZQ_REFINTERVAL_SHIFT 0
+#define EMIF_REG_ZQ_REFINTERVAL_MASK (0xffff << 0)
+
+/* TEMP_ALERT_CONFIG */
+#define EMIF_REG_TA_CS1EN_SHIFT 31
+#define EMIF_REG_TA_CS1EN_MASK (1 << 31)
+#define EMIF_REG_TA_CS0EN_SHIFT 30
+#define EMIF_REG_TA_CS0EN_MASK (1 << 30)
+#define EMIF_REG_TA_SFEXITEN_SHIFT 28
+#define EMIF_REG_TA_SFEXITEN_MASK (1 << 28)
+#define EMIF_REG_TA_DEVWDT_SHIFT 26
+#define EMIF_REG_TA_DEVWDT_MASK (0x3 << 26)
+#define EMIF_REG_TA_DEVCNT_SHIFT 24
+#define EMIF_REG_TA_DEVCNT_MASK (0x3 << 24)
+#define EMIF_REG_TA_REFINTERVAL_SHIFT 0
+#define EMIF_REG_TA_REFINTERVAL_MASK (0x3fffff << 0)
+
+/* OCP_ERR_LOG */
+#define EMIF_REG_MADDRSPACE_SHIFT 14
+#define EMIF_REG_MADDRSPACE_MASK (0x3 << 14)
+#define EMIF_REG_MBURSTSEQ_SHIFT 11
+#define EMIF_REG_MBURSTSEQ_MASK (0x7 << 11)
+#define EMIF_REG_MCMD_SHIFT 8
+#define EMIF_REG_MCMD_MASK (0x7 << 8)
+#define EMIF_REG_MCONNID_SHIFT 0
+#define EMIF_REG_MCONNID_MASK (0xff << 0)
+
+/* DDR_PHY_CTRL_1 */
+#define EMIF_REG_DDR_PHY_CTRL_1_SHIFT 4
+#define EMIF_REG_DDR_PHY_CTRL_1_MASK (0xfffffff << 4)
+#define EMIF_REG_READ_LATENCY_SHIFT 0
+#define EMIF_REG_READ_LATENCY_MASK (0xf << 0)
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHIFT 4
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_MASK (0xFF << 4)
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHIFT 12
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_MASK (0xFFFFF << 12)
+
+/* DDR_PHY_CTRL_1_SHDW */
+#define EMIF_REG_DDR_PHY_CTRL_1_SHDW_SHIFT 4
+#define EMIF_REG_DDR_PHY_CTRL_1_SHDW_MASK (0xfffffff << 4)
+#define EMIF_REG_READ_LATENCY_SHDW_SHIFT 0
+#define EMIF_REG_READ_LATENCY_SHDW_MASK (0xf << 0)
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHDW_SHIFT 4
+#define EMIF_REG_DLL_SLAVE_DLY_CTRL_SHDW_MASK (0xFF << 4)
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_SHIFT 12
+#define EMIF_EMIF_DDR_PHY_CTRL_1_BASE_VAL_SHDW_MASK (0xFFFFF << 12)
+
+/* DDR_PHY_CTRL_2 */
+#define EMIF_REG_DDR_PHY_CTRL_2_SHIFT 0
+#define EMIF_REG_DDR_PHY_CTRL_2_MASK (0xffffffff << 0)
+
+/* DMM */
+#define DMM_BASE 0x4E000040
+
+/* Memory Adapter */
+#define MA_BASE 0x482AF040
+
+/* DMM_LISA_MAP */
+#define EMIF_SYS_ADDR_SHIFT 24
+#define EMIF_SYS_ADDR_MASK (0xff << 24)
+#define EMIF_SYS_SIZE_SHIFT 20
+#define EMIF_SYS_SIZE_MASK (0x7 << 20)
+#define EMIF_SDRC_INTL_SHIFT 18
+#define EMIF_SDRC_INTL_MASK (0x3 << 18)
+#define EMIF_SDRC_ADDRSPC_SHIFT 16
+#define EMIF_SDRC_ADDRSPC_MASK (0x3 << 16)
+#define EMIF_SDRC_MAP_SHIFT 8
+#define EMIF_SDRC_MAP_MASK (0x3 << 8)
+#define EMIF_SDRC_ADDR_SHIFT 0
+#define EMIF_SDRC_ADDR_MASK (0xff << 0)
+
+/* DMM_LISA_MAP fields */
+#define DMM_SDRC_MAP_UNMAPPED 0
+#define DMM_SDRC_MAP_EMIF1_ONLY 1
+#define DMM_SDRC_MAP_EMIF2_ONLY 2
+#define DMM_SDRC_MAP_EMIF1_AND_EMIF2 3
+
+#define DMM_SDRC_INTL_NONE 0
+#define DMM_SDRC_INTL_128B 1
+#define DMM_SDRC_INTL_256B 2
+#define DMM_SDRC_INTL_512 3
+
+#define DMM_SDRC_ADDR_SPC_SDRAM 0
+#define DMM_SDRC_ADDR_SPC_NVM 1
+#define DMM_SDRC_ADDR_SPC_INVALID 2
+
+#define DMM_LISA_MAP_INTERLEAVED_BASE_VAL (\
+ (DMM_SDRC_MAP_EMIF1_AND_EMIF2 << EMIF_SDRC_MAP_SHIFT) |\
+ (DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT) |\
+ (DMM_SDRC_INTL_128B << EMIF_SDRC_INTL_SHIFT) |\
+ (CONFIG_SYS_SDRAM_BASE << EMIF_SYS_ADDR_SHIFT))
+
+#define DMM_LISA_MAP_EMIF1_ONLY_BASE_VAL (\
+ (DMM_SDRC_MAP_EMIF1_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+ (DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT)|\
+ (DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT))
+
+#define DMM_LISA_MAP_EMIF2_ONLY_BASE_VAL (\
+ (DMM_SDRC_MAP_EMIF2_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+ (DMM_SDRC_ADDR_SPC_SDRAM << EMIF_SDRC_ADDRSPC_SHIFT)|\
+ (DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT))
+
+/* Trap for invalid TILER PAT entries */
+#define DMM_LISA_MAP_0_INVAL_ADDR_TRAP (\
+ (0 << EMIF_SDRC_ADDR_SHIFT) |\
+ (DMM_SDRC_MAP_EMIF1_ONLY << EMIF_SDRC_MAP_SHIFT)|\
+ (DMM_SDRC_ADDR_SPC_INVALID << EMIF_SDRC_ADDRSPC_SHIFT)|\
+ (DMM_SDRC_INTL_NONE << EMIF_SDRC_INTL_SHIFT)|\
+ (0xFF << EMIF_SYS_ADDR_SHIFT))
+
+
+/* Reg mapping structure */
+struct emif_reg_struct {
+ u32 emif_mod_id_rev;
+ u32 emif_status;
+ u32 emif_sdram_config;
+ u32 emif_lpddr2_nvm_config;
+ u32 emif_sdram_ref_ctrl;
+ u32 emif_sdram_ref_ctrl_shdw;
+ u32 emif_sdram_tim_1;
+ u32 emif_sdram_tim_1_shdw;
+ u32 emif_sdram_tim_2;
+ u32 emif_sdram_tim_2_shdw;
+ u32 emif_sdram_tim_3;
+ u32 emif_sdram_tim_3_shdw;
+ u32 emif_lpddr2_nvm_tim;
+ u32 emif_lpddr2_nvm_tim_shdw;
+ u32 emif_pwr_mgmt_ctrl;
+ u32 emif_pwr_mgmt_ctrl_shdw;
+ u32 emif_lpddr2_mode_reg_data;
+ u32 padding1[1];
+ u32 emif_lpddr2_mode_reg_data_es2;
+ u32 padding11[1];
+ u32 emif_lpddr2_mode_reg_cfg;
+ u32 emif_l3_config;
+ u32 emif_l3_cfg_val_1;
+ u32 emif_l3_cfg_val_2;
+ u32 emif_iodft_tlgc;
+ u32 padding2[7];
+ u32 emif_perf_cnt_1;
+ u32 emif_perf_cnt_2;
+ u32 emif_perf_cnt_cfg;
+ u32 emif_perf_cnt_sel;
+ u32 emif_perf_cnt_tim;
+ u32 padding3;
+ u32 emif_read_idlectrl;
+ u32 emif_read_idlectrl_shdw;
+ u32 padding4;
+ u32 emif_irqstatus_raw_sys;
+ u32 emif_irqstatus_raw_ll;
+ u32 emif_irqstatus_sys;
+ u32 emif_irqstatus_ll;
+ u32 emif_irqenable_set_sys;
+ u32 emif_irqenable_set_ll;
+ u32 emif_irqenable_clr_sys;
+ u32 emif_irqenable_clr_ll;
+ u32 padding5;
+ u32 emif_zq_config;
+ u32 emif_temp_alert_config;
+ u32 emif_l3_err_log;
+ u32 padding6[4];
+ u32 emif_ddr_phy_ctrl_1;
+ u32 emif_ddr_phy_ctrl_1_shdw;
+ u32 emif_ddr_phy_ctrl_2;
+};
+
+struct dmm_lisa_map_regs {
+ u32 dmm_lisa_map_0;
+ u32 dmm_lisa_map_1;
+ u32 dmm_lisa_map_2;
+ u32 dmm_lisa_map_3;
+};
+
+#define CS0 0
+#define CS1 1
+/* The maximum frequency at which the LPDDR2 interface can operate in Hz*/
+#define MAX_LPDDR2_FREQ 400000000 /* 400 MHz */
+
+/*
+ * The period of DDR clk is represented as numerator and denominator for
+ * better accuracy in integer based calculations. However, if the numerator
+ * and denominator are very huge there may be chances of overflow in
+ * calculations. So, as a trade-off keep denominator(and consequently
+ * numerator) within a limit sacrificing some accuracy - but not much
+ * If denominator and numerator are already small (such as at 400 MHz)
+ * no adjustment is needed
+ */
+#define EMIF_PERIOD_DEN_LIMIT 1000
+/*
+ * Maximum number of different frequencies supported by EMIF driver
+ * Determines the number of entries in the pointer array for register
+ * cache
+ */
+#define EMIF_MAX_NUM_FREQUENCIES 6
+/*
+ * Indices into the Addressing Table array.
+ * One entry each for all the different types of devices with different
+ * addressing schemes
+ */
+#define ADDR_TABLE_INDEX64M 0
+#define ADDR_TABLE_INDEX128M 1
+#define ADDR_TABLE_INDEX256M 2
+#define ADDR_TABLE_INDEX512M 3
+#define ADDR_TABLE_INDEX1GS4 4
+#define ADDR_TABLE_INDEX2GS4 5
+#define ADDR_TABLE_INDEX4G 6
+#define ADDR_TABLE_INDEX8G 7
+#define ADDR_TABLE_INDEX1GS2 8
+#define ADDR_TABLE_INDEX2GS2 9
+#define ADDR_TABLE_INDEXMAX 10
+
+/* Number of Row bits */
+#define ROW_9 0
+#define ROW_10 1
+#define ROW_11 2
+#define ROW_12 3
+#define ROW_13 4
+#define ROW_14 5
+#define ROW_15 6
+#define ROW_16 7
+
+/* Number of Column bits */
+#define COL_8 0
+#define COL_9 1
+#define COL_10 2
+#define COL_11 3
+#define COL_7 4 /*Not supported by OMAP included for completeness */
+
+/* Number of Banks*/
+#define BANKS1 0
+#define BANKS2 1
+#define BANKS4 2
+#define BANKS8 3
+
+/* Refresh rate in micro seconds x 10 */
+#define T_REFI_15_6 156
+#define T_REFI_7_8 78
+#define T_REFI_3_9 39
+
+#define EBANK_CS1_DIS 0
+#define EBANK_CS1_EN 1
+
+/* Read Latency used by the device at reset */
+#define RL_BOOT 3
+/* Read Latency for the highest frequency you want to use */
+#ifdef CONFIG_OMAP54XX
+#define RL_FINAL 8
+#else
+#define RL_FINAL 6
+#endif
+
+
+/* Interleaving policies at EMIF level- between banks and Chip Selects */
+#define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING 0
+#define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING 3
+
+/*
+ * Interleaving policy to be used
+ * Currently set to MAX interleaving for better performance
+ */
+#define EMIF_INTERLEAVING_POLICY EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING
+
+/* State of the core voltage:
+ * This is important for some parameters such as read idle control and
+ * ZQ calibration timings. Timings are much stricter when voltage ramp
+ * is happening compared to when the voltage is stable.
+ * We need to calculate two sets of values for these parameters and use
+ * them accordingly
+ */
+#define LPDDR2_VOLTAGE_STABLE 0
+#define LPDDR2_VOLTAGE_RAMPING 1
+
+/* Length of the forced read idle period in terms of cycles */
+#define EMIF_REG_READ_IDLE_LEN_VAL 5
+
+/* Interval between forced 'read idles' */
+/* To be used when voltage is changed for DPS/DVFS - 1us */
+#define READ_IDLE_INTERVAL_DVFS (1*1000)
+/*
+ * To be used when voltage is not scaled except by Smart Reflex
+ * 50us - or maximum value will do
+ */
+#define READ_IDLE_INTERVAL_NORMAL (50*1000)
+
+
+/*
+ * Unless voltage is changing due to DVFS one ZQCS command every 50ms should
+ * be enough. This shoule be enough also in the case when voltage is changing
+ * due to smart-reflex.
+ */
+#define EMIF_ZQCS_INTERVAL_NORMAL_IN_US (50*1000)
+/*
+ * If voltage is changing due to DVFS ZQCS should be performed more
+ * often(every 50us)
+ */
+#define EMIF_ZQCS_INTERVAL_DVFS_IN_US 50
+
+/* The interval between ZQCL commands as a multiple of ZQCS interval */
+#define REG_ZQ_ZQCL_MULT 4
+/* The interval between ZQINIT commands as a multiple of ZQCL interval */
+#define REG_ZQ_ZQINIT_MULT 3
+/* Enable ZQ Calibration on exiting Self-refresh */
+#define REG_ZQ_SFEXITEN_ENABLE 1
+/*
+ * ZQ Calibration simultaneously on both chip-selects:
+ * Needs one calibration resistor per CS
+ * None of the boards that we know of have this capability
+ * So disabled by default
+ */
+#define REG_ZQ_DUALCALEN_DISABLE 0
+/*
+ * Enable ZQ Calibration by default on CS0. If we are asked to program
+ * the EMIF there will be something connected to CS0 for sure
+ */
+#define REG_ZQ_CS0EN_ENABLE 1
+
+/* EMIF_PWR_MGMT_CTRL register */
+/* Low power modes */
+#define LP_MODE_DISABLE 0
+#define LP_MODE_CLOCK_STOP 1
+#define LP_MODE_SELF_REFRESH 2
+#define LP_MODE_PWR_DN 3
+
+/* REG_DPD_EN */
+#define DPD_DISABLE 0
+#define DPD_ENABLE 1
+
+/* Maximum delay before Low Power Modes */
+#define REG_CS_TIM 0xF
+#define REG_SR_TIM 0xF
+#define REG_PD_TIM 0xF
+
+/* EMIF_PWR_MGMT_CTRL register */
+#define EMIF_PWR_MGMT_CTRL (\
+ ((REG_CS_TIM << EMIF_REG_CS_TIM_SHIFT) & EMIF_REG_CS_TIM_MASK)|\
+ ((REG_SR_TIM << EMIF_REG_SR_TIM_SHIFT) & EMIF_REG_SR_TIM_MASK)|\
+ ((REG_PD_TIM << EMIF_REG_PD_TIM_SHIFT) & EMIF_REG_PD_TIM_MASK)|\
+ ((REG_PD_TIM << EMIF_REG_PD_TIM_SHIFT) & EMIF_REG_PD_TIM_MASK)|\
+ ((LP_MODE_DISABLE << EMIF_REG_LP_MODE_SHIFT)\
+ & EMIF_REG_LP_MODE_MASK) |\
+ ((DPD_DISABLE << EMIF_REG_DPD_EN_SHIFT)\
+ & EMIF_REG_DPD_EN_MASK))\
+
+#define EMIF_PWR_MGMT_CTRL_SHDW (\
+ ((REG_CS_TIM << EMIF_REG_CS_TIM_SHDW_SHIFT)\
+ & EMIF_REG_CS_TIM_SHDW_MASK) |\
+ ((REG_SR_TIM << EMIF_REG_SR_TIM_SHDW_SHIFT)\
+ & EMIF_REG_SR_TIM_SHDW_MASK) |\
+ ((REG_PD_TIM << EMIF_REG_PD_TIM_SHDW_SHIFT)\
+ & EMIF_REG_PD_TIM_SHDW_MASK) |\
+ ((REG_PD_TIM << EMIF_REG_PD_TIM_SHDW_SHIFT)\
+ & EMIF_REG_PD_TIM_SHDW_MASK))
+
+/* EMIF_L3_CONFIG register value */
+#define EMIF_L3_CONFIG_VAL_SYS_10_LL_0 0x0A0000FF
+#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_3_LL_0 0x0A300000
+#define EMIF_L3_CONFIG_VAL_SYS_10_MPU_5_LL_0 0x0A300000
+
+/*
+ * Value of bits 12:31 of DDR_PHY_CTRL_1 register:
+ * All these fields have magic values dependent on frequency and
+ * determined by PHY and DLL integration with EMIF. Setting the magic
+ * values suggested by hw team.
+ */
+#define EMIF_DDR_PHY_CTRL_1_BASE_VAL 0x049FF
+#define EMIF_DLL_SLAVE_DLY_CTRL_400_MHZ 0x41
+#define EMIF_DLL_SLAVE_DLY_CTRL_200_MHZ 0x80
+#define EMIF_DLL_SLAVE_DLY_CTRL_100_MHZ_AND_LESS 0xFF
+
+/*
+* MR1 value:
+* Burst length : 8
+* Burst type : sequential
+* Wrap : enabled
+* nWR : 3(default). EMIF does not do pre-charge.
+* : So nWR is don't care
+*/
+#define MR1_BL_8_BT_SEQ_WRAP_EN_NWR_3 0x23
+
+/* MR2 */
+#define MR2_RL3_WL1 1
+#define MR2_RL4_WL2 2
+#define MR2_RL5_WL2 3
+#define MR2_RL6_WL3 4
+
+/* MR10: ZQ calibration codes */
+#define MR10_ZQ_ZQCS 0x56
+#define MR10_ZQ_ZQCL 0xAB
+#define MR10_ZQ_ZQINIT 0xFF
+#define MR10_ZQ_ZQRESET 0xC3
+
+/* TEMP_ALERT_CONFIG */
+#define TEMP_ALERT_POLL_INTERVAL_MS 360 /* for temp gradient - 5 C/s */
+#define TEMP_ALERT_CONFIG_DEVCT_1 0
+#define TEMP_ALERT_CONFIG_DEVWDT_32 2
+
+/* MR16 value: refresh full array(no partial array self refresh) */
+#define MR16_REF_FULL_ARRAY 0
+
+/*
+ * Maximum number of entries we keep in our array of timing tables
+ * We need not keep all the speed bins supported by the device
+ * We need to keep timing tables for only the speed bins that we
+ * are interested in
+ */
+#define MAX_NUM_SPEEDBINS 4
+
+/* LPDDR2 Densities */
+#define LPDDR2_DENSITY_64Mb 0
+#define LPDDR2_DENSITY_128Mb 1
+#define LPDDR2_DENSITY_256Mb 2
+#define LPDDR2_DENSITY_512Mb 3
+#define LPDDR2_DENSITY_1Gb 4
+#define LPDDR2_DENSITY_2Gb 5
+#define LPDDR2_DENSITY_4Gb 6
+#define LPDDR2_DENSITY_8Gb 7
+#define LPDDR2_DENSITY_16Gb 8
+#define LPDDR2_DENSITY_32Gb 9
+
+/* LPDDR2 type */
+#define LPDDR2_TYPE_S4 0
+#define LPDDR2_TYPE_S2 1
+#define LPDDR2_TYPE_NVM 2
+
+/* LPDDR2 IO width */
+#define LPDDR2_IO_WIDTH_32 0
+#define LPDDR2_IO_WIDTH_16 1
+#define LPDDR2_IO_WIDTH_8 2
+
+/* Mode register numbers */
+#define LPDDR2_MR0 0
+#define LPDDR2_MR1 1
+#define LPDDR2_MR2 2
+#define LPDDR2_MR3 3
+#define LPDDR2_MR4 4
+#define LPDDR2_MR5 5
+#define LPDDR2_MR6 6
+#define LPDDR2_MR7 7
+#define LPDDR2_MR8 8
+#define LPDDR2_MR9 9
+#define LPDDR2_MR10 10
+#define LPDDR2_MR11 11
+#define LPDDR2_MR16 16
+#define LPDDR2_MR17 17
+#define LPDDR2_MR18 18
+
+/* MR0 */
+#define LPDDR2_MR0_DAI_SHIFT 0
+#define LPDDR2_MR0_DAI_MASK 1
+#define LPDDR2_MR0_DI_SHIFT 1
+#define LPDDR2_MR0_DI_MASK (1 << 1)
+#define LPDDR2_MR0_DNVI_SHIFT 2
+#define LPDDR2_MR0_DNVI_MASK (1 << 2)
+
+/* MR4 */
+#define MR4_SDRAM_REF_RATE_SHIFT 0
+#define MR4_SDRAM_REF_RATE_MASK 7
+#define MR4_TUF_SHIFT 7
+#define MR4_TUF_MASK (1 << 7)
+
+/* MR4 SDRAM Refresh Rate field values */
+#define SDRAM_TEMP_LESS_LOW_SHUTDOWN 0x0
+#define SDRAM_TEMP_LESS_4X_REFRESH_AND_TIMINGS 0x1
+#define SDRAM_TEMP_LESS_2X_REFRESH_AND_TIMINGS 0x2
+#define SDRAM_TEMP_NOMINAL 0x3
+#define SDRAM_TEMP_RESERVED_4 0x4
+#define SDRAM_TEMP_HIGH_DERATE_REFRESH 0x5
+#define SDRAM_TEMP_HIGH_DERATE_REFRESH_AND_TIMINGS 0x6
+#define SDRAM_TEMP_VERY_HIGH_SHUTDOWN 0x7
+
+#define LPDDR2_MANUFACTURER_SAMSUNG 1
+#define LPDDR2_MANUFACTURER_QIMONDA 2
+#define LPDDR2_MANUFACTURER_ELPIDA 3
+#define LPDDR2_MANUFACTURER_ETRON 4
+#define LPDDR2_MANUFACTURER_NANYA 5
+#define LPDDR2_MANUFACTURER_HYNIX 6
+#define LPDDR2_MANUFACTURER_MOSEL 7
+#define LPDDR2_MANUFACTURER_WINBOND 8
+#define LPDDR2_MANUFACTURER_ESMT 9
+#define LPDDR2_MANUFACTURER_SPANSION 11
+#define LPDDR2_MANUFACTURER_SST 12
+#define LPDDR2_MANUFACTURER_ZMOS 13
+#define LPDDR2_MANUFACTURER_INTEL 14
+#define LPDDR2_MANUFACTURER_NUMONYX 254
+#define LPDDR2_MANUFACTURER_MICRON 255
+
+/* MR8 register fields */
+#define MR8_TYPE_SHIFT 0x0
+#define MR8_TYPE_MASK 0x3
+#define MR8_DENSITY_SHIFT 0x2
+#define MR8_DENSITY_MASK (0xF << 0x2)
+#define MR8_IO_WIDTH_SHIFT 0x6
+#define MR8_IO_WIDTH_MASK (0x3 << 0x6)
+
+struct lpddr2_addressing {
+ u8 num_banks;
+ u8 t_REFI_us_x10;
+ u8 row_sz[2]; /* One entry each for x32 and x16 */
+ u8 col_sz[2]; /* One entry each for x32 and x16 */
+};
+
+/* Structure for timings from the DDR datasheet */
+struct lpddr2_ac_timings {
+ u32 max_freq;
+ u8 RL;
+ u8 tRPab;
+ u8 tRCD;
+ u8 tWR;
+ u8 tRASmin;
+ u8 tRRD;
+ u8 tWTRx2;
+ u8 tXSR;
+ u8 tXPx2;
+ u8 tRFCab;
+ u8 tRTPx2;
+ u8 tCKE;
+ u8 tCKESR;
+ u8 tZQCS;
+ u32 tZQCL;
+ u32 tZQINIT;
+ u8 tDQSCKMAXx2;
+ u8 tRASmax;
+ u8 tFAW;
+
+};
+
+/*
+ * Min tCK values for some of the parameters:
+ * If the calculated clock cycles for the respective parameter is
+ * less than the corresponding min tCK value, we need to set the min
+ * tCK value. This may happen at lower frequencies.
+ */
+struct lpddr2_min_tck {
+ u32 tRL;
+ u32 tRP_AB;
+ u32 tRCD;
+ u32 tWR;
+ u32 tRAS_MIN;
+ u32 tRRD;
+ u32 tWTR;
+ u32 tXP;
+ u32 tRTP;
+ u8 tCKE;
+ u32 tCKESR;
+ u32 tFAW;
+};
+
+struct lpddr2_device_details {
+ u8 type;
+ u8 density;
+ u8 io_width;
+ u8 manufacturer;
+};
+
+struct lpddr2_device_timings {
+ const struct lpddr2_ac_timings **ac_timings;
+ const struct lpddr2_min_tck *min_tck;
+};
+
+/* Details of the devices connected to each chip-select of an EMIF instance */
+struct emif_device_details {
+ const struct lpddr2_device_details *cs0_device_details;
+ const struct lpddr2_device_details *cs1_device_details;
+ const struct lpddr2_device_timings *cs0_device_timings;
+ const struct lpddr2_device_timings *cs1_device_timings;
+};
+
+/*
+ * Structure containing shadow of important registers in EMIF
+ * The calculation function fills in this structure to be later used for
+ * initialization and DVFS
+ */
+struct emif_regs {
+ u32 freq;
+ u32 sdram_config_init;
+ u32 sdram_config;
+ u32 ref_ctrl;
+ u32 sdram_tim1;
+ u32 sdram_tim2;
+ u32 sdram_tim3;
+ u32 read_idle_ctrl;
+ u32 zq_config;
+ u32 temp_alert_config;
+ u32 emif_ddr_phy_ctlr_1_init;
+ u32 emif_ddr_phy_ctlr_1;
+};
+
+/* assert macros */
+#if defined(DEBUG)
+#define emif_assert(c) ({ if (!(c)) for (;;); })
+#else
+#define emif_assert(c) ({ if (0) hang(); })
+#endif
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs);
+void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs);
+#else
+struct lpddr2_device_details *emif_get_device_details(u32 emif_nr, u8 cs,
+ struct lpddr2_device_details *lpddr2_dev_details);
+void emif_get_device_timings(u32 emif_nr,
+ const struct lpddr2_device_timings **cs0_device_timings,
+ const struct lpddr2_device_timings **cs1_device_timings);
+#endif
+
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+extern u32 *const T_num;
+extern u32 *const T_den;
+extern u32 *const emif_sizes;
+#endif
+
+
+#endif
diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h
index 2549051..2d5c3bc 100644
--- a/arch/arm/include/asm/mach-types.h
+++ b/arch/arm/include/asm/mach-types.h
@@ -1104,6 +1104,7 @@ extern unsigned int __machine_arch_type;
#define MACH_TYPE_THALES_ADC 3492
#define MACH_TYPE_UBISYS_P9D_EVP 3493
#define MACH_TYPE_ATDGP318 3494
+#define MACH_TYPE_OMAP5_SEVM 3777
#ifdef CONFIG_ARCH_EBSA110
# ifdef machine_arch_type
@@ -14209,6 +14210,18 @@ extern unsigned int __machine_arch_type;
# define machine_is_atdgp318() (0)
#endif
+#ifdef CONFIG_MACH_OMAP5_SEVM
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_OMAP5_SEVM
+# endif
+# define machine_is_omap5_sevm() (machine_arch_type == MACH_TYPE_OMAP5_SEVM)
+#else
+# define machine_is_omap5_sevm() (0)
+#endif
+
/*
* These have not yet been registered
*/
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index 3f2f004..f1562ea 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -37,7 +37,16 @@
void preloader_console_init(void);
/* Boot device */
-#ifdef CONFIG_OMAP44XX /* OMAP4 */
+#ifdef CONFIG_OMAP54XX
+#define BOOT_DEVICE_NONE 0
+#define BOOT_DEVICE_XIP 1
+#define BOOT_DEVICE_XIPWAIT 2
+#define BOOT_DEVICE_NAND 3
+#define BOOT_DEVICE_ONE_NAND 4
+#define BOOT_DEVICE_MMC1 5
+#define BOOT_DEVICE_MMC2 6
+#define BOOT_DEVICE_MMC3 7
+#elif defined(CONFIG_OMAP44XX) /* OMAP4 */
#define BOOT_DEVICE_NONE 0
#define BOOT_DEVICE_XIP 1
#define BOOT_DEVICE_XIPWAIT 2
@@ -71,10 +80,10 @@ struct spl_image_info {
extern struct spl_image_info spl_image;
+extern u32* boot_params_ptr;
u32 omap_boot_device(void);
u32 omap_boot_mode(void);
-
/* SPL common function s*/
void spl_parse_image_header(const struct image_header *header);
void omap_rev_string(char *omap_rev_string);
@@ -85,4 +94,22 @@ void spl_nand_load_image(void);
/* MMC SPL functions */
void spl_mmc_load_image(void);
+/*
+ * silicon revisions.
+ * Moving this to common, so that most of code can be moved to common,
+ * directories.
+ */
+
+/* omap4 */
+#define OMAP4430_SILICON_ID_INVALID 0xFFFFFFFF
+#define OMAP4430_ES1_0 0x44300100
+#define OMAP4430_ES2_0 0x44300200
+#define OMAP4430_ES2_1 0x44300210
+#define OMAP4430_ES2_2 0x44300220
+#define OMAP4430_ES2_3 0x44300230
+#define OMAP4460_ES1_0 0x44600100
+
+/* omap5 */
+#define OMAP5430_SILICON_ID_INVALID 0
+#define OMAP5430_ES1_0 0x54300100
#endif /* _OMAP_COMMON_H_ */
diff --git a/board/armltd/integrator/arm-ebi.h b/board/armltd/integrator/arm-ebi.h
new file mode 100644
index 0000000..2d85e3f
--- /dev/null
+++ b/board/armltd/integrator/arm-ebi.h
@@ -0,0 +1,62 @@
+/*
+ * (C) Copyright 2011
+ * Linaro
+ * Linus Walleij <linus.walleij@linaro.org>
+ * Register definitions for the External Bus Interface (EBI)
+ * found in the ARM Integrator AP and CP reference designs
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ARM_EBI_H
+#define __ARM_EBI_H
+
+#define EBI_BASE 0x12000000
+
+#define EBI_CSR0_REG 0x00 /* CS0 = Boot ROM */
+#define EBI_CSR1_REG 0x04 /* CS1 = Flash */
+#define EBI_CSR2_REG 0x08 /* CS2 = SSRAM */
+#define EBI_CSR3_REG 0x0C /* CS3 = Expansion memory */
+/*
+ * The four upper bits are the waitstates for each chip select
+ * 0x00 = 2 cycles, 0x10 = 3 cycles, ... 0xe0 = 16 cycles, 0xf0 = 16 cycles
+ */
+#define EBI_CSR_WAIT_MASK 0xF0
+/* Whether memory is synchronous or asynchronous */
+#define EBI_CSR_SYNC_MASK 0xF7
+#define EBI_CSR_ASYNC 0x00
+#define EBI_CSR_SYNC 0x08
+/* Whether memory is write enabled or not */
+#define EBI_CSR_WREN_MASK 0xFB
+#define EBI_CSR_WREN_DISABLE 0x00
+#define EBI_CSR_WREN_ENABLE 0x04
+/* Memory bit width for each chip select */
+#define EBI_CSR_MEMSIZE_MASK 0xFC
+#define EBI_CSR_MEMSIZE_8BIT 0x00
+#define EBI_CSR_MEMSIZE_16BIT 0x01
+#define EBI_CSR_MEMSIZE_32BIT 0x02
+
+/*
+ * The lock register need to be written with 0xa05f before anything in the
+ * EBI can be changed.
+ */
+#define EBI_LOCK_REG 0x20
+#define EBI_UNLOCK_MAGIC 0xA05F
+
+#endif
diff --git a/board/armltd/integrator/config.mk b/board/armltd/integrator/config.mk
deleted file mode 100644
index 8b57af1..0000000
--- a/board/armltd/integrator/config.mk
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# image should be loaded at 0x01000000
-#
-
-CONFIG_SYS_TEXT_BASE = 0x01000000
diff --git a/board/armltd/integrator/integrator-sc.h b/board/armltd/integrator/integrator-sc.h
new file mode 100644
index 0000000..279dc55
--- /dev/null
+++ b/board/armltd/integrator/integrator-sc.h
@@ -0,0 +1,91 @@
+/*
+ * (C) Copyright 2011
+ * Linaro
+ * Linus Walleij <linus.walleij@linaro.org>
+ * Register definitions for the System Controller (SC) and
+ * the similar "CP Controller" found in the ARM Integrator/AP and
+ * Integrator/CP reference designs
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ARM_SC_H
+#define __ARM_SC_H
+
+#define SC_BASE 0x11000000
+
+/*
+ * The system controller registers
+ */
+#define SC_ID_OFFSET 0x00
+#define SC_OSC_OFFSET 0x04
+/* Setting this bit switches to 25 MHz mode, clear means 33 MHz */
+#define SC_OSC_DIVXY (1 << 8)
+#define SC_CTRLS_OFFSET 0x08
+#define SC_CTRLC_OFFSET 0x0C
+/* Set bits by writing CTRLS, clear bits by writing CTRLC */
+#define SC_CTRL_SOFTRESET (1 << 0)
+#define SC_CTRL_FLASHVPP (1 << 1)
+#define SC_CTRL_FLASHWP (1 << 2)
+#define SC_CTRL_UART1DTR (1 << 4)
+#define SC_CTRL_UART1RTS (1 << 5)
+#define SC_CTRL_UART0DTR (1 << 6)
+#define SC_CTRL_UART0RTS (1 << 7)
+#define SC_DEC_OFFSET 0x10
+#define SC_ARB_OFFSET 0x14
+#define SC_PCI_OFFSET 0x18
+#define SC_PCI_PCIEN (1 << 0)
+#define SC_PCI_PCIBINT_CLR (1 << 1)
+#define SC_LOCK_OFFSET 0x1C
+#define SC_LBFADDR_OFFSET 0x20
+#define SC_LBFCODE_OFFSET 0x24
+
+#define SC_ID (SC_BASE + SC_ID_OFFSET)
+#define SC_OSC (SC_BASE + SC_OSC_OFFSET)
+#define SC_CTRLS (SC_BASE + SC_CTRLS_OFFSET)
+#define SC_CTRLC (SC_BASE + SC_CTRLC_OFFSET)
+#define SC_DEC (SC_BASE + SC_DEC_OFFSET)
+#define SC_ARB (SC_BASE + SC_ARB_OFFSET)
+#define SC_PCI (SC_BASE + SC_PCI_OFFSET)
+#define SC_LOCK (SC_BASE + SC_LOCK_OFFSET)
+#define SC_LBFADDR (SC_BASE + SC_LBFADDR_OFFSET)
+#define SC_LBFCODE (SC_BASE + SC_LBFCODE_OFFSET)
+
+/*
+ * The Integrator/CP as a smaller set of registers, at a different
+ * offset - probably not to disturb old software.
+ */
+
+#define CP_BASE 0xCB000000
+
+#define CP_IDFIELD_OFFSET 0x00
+#define CP_FLASHPROG_OFFSET 0x04
+#define CP_FLASHPROG_FLVPPEN (1 << 0)
+#define CP_FLASHPROG_FLWREN (1 << 1)
+#define CP_FLASHPROG_FLASHSIZE (1 << 2)
+#define CP_FLASHPROG_EXTRABANK (1 << 3)
+#define CP_INTREG_OFFSET 0x08
+#define CP_DECODE_OFFSET 0x0C
+
+#define CP_IDFIELD (CP_BASE + CP_ID_OFFSET)
+#define CP_FLASHPROG (CP_BASE + CP_FLASHPROG_OFFSET)
+#define CP_INTREG (CP_BASE + CP_INTREG_OFFSET)
+#define CP_DECODE (CP_BASE + CP_DECODE_OFFSET)
+
+#endif
diff --git a/board/armltd/integrator/integrator.c b/board/armltd/integrator/integrator.c
index c8d2bc7..a507c09 100644
--- a/board/armltd/integrator/integrator.c
+++ b/board/armltd/integrator/integrator.c
@@ -35,6 +35,9 @@
#include <common.h>
#include <netdev.h>
+#include <asm/io.h>
+#include "arm-ebi.h"
+#include "integrator-sc.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -55,6 +58,8 @@ void show_boot_progress(int progress)
int board_init (void)
{
+ u32 val;
+
/* arch number of Integrator Board */
#ifdef CONFIG_ARCH_CINTEGRATOR
gd->bd->bi_arch_number = MACH_TYPE_CINTEGRATOR;
@@ -72,6 +77,37 @@ extern void cm_remap(void);
cm_remap(); /* remaps writeable memory to 0x00000000 */
#endif
+#ifdef CONFIG_ARCH_CINTEGRATOR
+ /*
+ * Flash protection on the Integrator/CP is in a simple register
+ */
+ val = readl(CP_FLASHPROG);
+ val |= (CP_FLASHPROG_FLVPPEN | CP_FLASHPROG_FLWREN);
+ writel(val, CP_FLASHPROG);
+#else
+ /*
+ * The Integrator/AP has some special protection mechanisms
+ * for the external memories, first the External Bus Interface (EBI)
+ * then the system controller (SC).
+ *
+ * The system comes up with the flash memory non-writable and
+ * configuration locked. If we want U-Boot to be used for flash
+ * access we cannot have the flash memory locked.
+ */
+ writel(EBI_UNLOCK_MAGIC, EBI_BASE + EBI_LOCK_REG);
+ val = readl(EBI_BASE + EBI_CSR1_REG);
+ val &= EBI_CSR_WREN_MASK;
+ val |= EBI_CSR_WREN_ENABLE;
+ writel(val, EBI_BASE + EBI_CSR1_REG);
+ writel(0, EBI_BASE + EBI_LOCK_REG);
+
+ /*
+ * Set up the system controller to remove write protection from
+ * the flash memory and enable Vpp
+ */
+ writel(SC_CTRL_FLASHVPP | SC_CTRL_FLASHWP, SC_CTRLS);
+#endif
+
icache_enable ();
return 0;
@@ -86,21 +122,30 @@ int misc_init_r (void)
return (0);
}
+/*
+ * The Integrator remaps the Flash memory to 0x00000000 and executes U-Boot
+ * from there, which means we cannot test the RAM underneath the ROM at this
+ * point. It will be unmapped later on, when we are executing from the
+ * relocated in RAM U-Boot. We simply assume that this RAM is usable if the
+ * RAM on higher addresses works fine.
+ */
+#define REMAPPED_FLASH_SZ 0x40000
+
int dram_init (void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
#ifdef CONFIG_CM_SPD_DETECT
{
extern void dram_query(void);
- unsigned long cm_reg_sdram;
- unsigned long sdram_shift;
+ u32 cm_reg_sdram;
+ u32 sdram_shift;
dram_query(); /* Assembler accesses to CM registers */
/* Queries the SPD values */
/* Obtain the SDRAM size from the CM SDRAM register */
- cm_reg_sdram = *(volatile ulong *)(CM_BASE + OS_SDRAM);
+ cm_reg_sdram = readl(CM_BASE + OS_SDRAM);
/* Register SDRAM size
*
* 0xXXXXXXbbb000bb 16 MB
@@ -110,16 +155,18 @@ extern void dram_query(void);
* 0xXXXXXXbbb100bb 256 MB
*
*/
- sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4;
- gd->bd->bi_dram[0].size = 0x01000000 << sdram_shift;
- gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+ sdram_shift = ((cm_reg_sdram & 0x0000001C)/4)%4;
+ gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE +
+ REMAPPED_FLASH_SZ,
0x01000000 << sdram_shift);
}
#else
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
- gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
+ gd->ram_size = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE +
+ REMAPPED_FLASH_SZ,
PHYS_SDRAM_1_SIZE);
#endif /* CM_SPD_DETECT */
+ /* We only have one bank of RAM, set it to whatever was detected */
+ gd->bd->bi_dram[0].size = gd->ram_size;
return 0;
}
diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c
deleted file mode 100644
index dd29e62..0000000
--- a/board/csb226/csb226.c
+++ /dev/null
@@ -1,166 +0,0 @@
-/*
- * (C) Copyright 2002
- * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de
- * Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net
- * Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
-/**
- * misc_init_r: - misc initialisation routines
- */
-
-int misc_init_r(void)
-{
-#if 0
- uchar *str;
-
- /* determine if the software update key is pressed during startup */
- /* not ported yet... */
- if (GPLR0 & 0x00000800) {
- printf("using bootcmd_normal (sw-update button not pressed)\n");
- str = getenv("bootcmd_normal");
- } else {
- printf("using bootcmd_update (sw-update button pressed)\n");
- str = getenv("bootcmd_update");
- }
-
- setenv("bootcmd",str);
-#endif
- return 0;
-}
-
-
-/**
- * board_init: - setup some data structures
- *
- * @return: 0 in case of success
- */
-
-int board_init (void)
-{
- /* We have RAM, disable cache */
- dcache_disable();
- icache_disable();
-
- /* arch number of CSB226 board */
- gd->bd->bi_arch_number = MACH_TYPE_CSB226;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0xa0000100;
-
- return 0;
-}
-
-
-extern void pxa_dram_init(void);
-int dram_init(void)
-{
- pxa_dram_init();
- gd->ram_size = PHYS_SDRAM_1_SIZE;
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-/**
- * csb226_set_led: - switch LEDs on or off
- *
- * @param led: LED to switch (0,1,2)
- * @param state: switch on (1) or off (0)
- */
-
-void csb226_set_led(int led, int state)
-{
- switch(led) {
-
- case 0: if (state==1) {
- writel(readl(GPCR0) | CSB226_USER_LED0, GPCR0);
- } else if (state==0) {
- writel(readl(GPSR0) | CSB226_USER_LED0, GPSR0);
- }
- break;
-
- case 1: if (state==1) {
- writel(readl(GPCR0) | CSB226_USER_LED1, GPCR0);
- } else if (state==0) {
- writel(readl(GPSR0) | CSB226_USER_LED1, GPSR0);
- }
- break;
-
- case 2: if (state==1) {
- writel(readl(GPCR0) | CSB226_USER_LED2, GPCR0);
- } else if (state==0) {
- writel(readl(GPSR0) | CSB226_USER_LED2, GPSR0);
- }
- break;
- }
-
- return;
-}
-
-
-/**
- * show_boot_progress: - indicate state of the boot process
- *
- * @param status: Status number - see README for details.
- *
- * The CSB226 does only have 3 LEDs, so we switch them on at the most
- * important states (1, 5, 15).
- */
-
-void show_boot_progress (int status)
-{
- switch(status) {
- case 1: csb226_set_led(0,1); break;
- case 5: csb226_set_led(1,1); break;
- case 15: csb226_set_led(2,1); break;
- }
-
- return;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/csb226/flash.c b/board/csb226/flash.c
deleted file mode 100644
index e103470..0000000
--- a/board/csb226/flash.c
+++ /dev/null
@@ -1,368 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
- *
- * (C) Copyright 2003 (2 x 16 bit Flash bank patches)
- * Rolf Peukert, IMMS gGmbH, <rolf.peukert@imms.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/pxa-regs.h>
-
-#define FLASH_BANK_SIZE 0x02000000
-#define MAIN_SECT_SIZE 0x40000 /* 2x16 = 256k per sector */
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-/**
- * flash_init: - initialize data structures for flash chips
- *
- * @return: size of the flash
- */
-
-ulong flash_init(void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-
- switch (i) {
- case 0:
- flashbase = PHYS_FLASH_1;
- break;
- default:
- panic("configured too many flash banks!\n");
- break;
- }
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /* Protect monitor and environment sectors */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
- &flash_info[0]);
-
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[0]);
-
- return size;
-}
-
-
-/**
- * flash_print_info: - print information about the flash situation
- */
-
-void flash_print_info (flash_info_t *info)
-{
- int i, j;
-
- for (j=0; j<CONFIG_SYS_MAX_FLASH_BANKS; j++) {
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf ("Intel: ");
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
- printf("28F128J3 (128Mbit)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- return;
- }
-
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) printf ("\n ");
-
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- info++;
- }
-}
-
-
-/**
- * flash_erase: - erase flash sectors
- */
-
-int flash_erase(flash_info_t *info, int s_first, int s_last)
-{
- int flag, prot, sect;
- int rc = ERR_OK;
- ulong start;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
- return ERR_UNKNOWN_FLASH_VENDOR;
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) prot++;
- }
-
- if (prot) return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-
- flag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
-
- printf("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- if (info->protect[sect] == 0) { /* not protected */
- u32 * volatile addr = (u32 * volatile)(info->start[sect]);
-
- /* erase sector: */
- /* The strata flashs are aligned side by side on */
- /* the data bus, so we have to write the commands */
- /* to both chips here: */
-
- *addr = 0x00200020; /* erase setup */
- *addr = 0x00D000D0; /* erase confirm */
-
- while ((*addr & 0x00800080) != 0x00800080) {
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = 0x00B000B0; /* suspend erase*/
- *addr = 0x00FF00FF; /* read mode */
- rc = ERR_TIMOUT;
- goto outahere;
- }
- }
- *addr = 0x00500050; /* clear status register cmd. */
- *addr = 0x00FF00FF; /* reset to read mode */
- }
- printf("ok.\n");
- }
- if (ctrlc()) printf("User Interrupt!\n");
-
-outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked(10000);
-
- if (flag) enable_interrupts();
-
- return rc;
-}
-
-/**
- * write_long: - copy memory to flash, assume a bank of 2 devices with 16bit each
- */
-
-static int write_long (flash_info_t *info, ulong dest, ulong data)
-{
- u32 * volatile addr = (u32 * volatile)dest, val;
- int rc = ERR_OK;
- int flag;
- ulong start;
-
- /* read array command - just for the case... */
- *addr = 0x00FF00FF;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts();
-
- /* clear status register command */
- *addr = 0x00500050;
-
- /* program set-up command */
- *addr = 0x00400040;
-
- /* latch address/data */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait while polling the status register */
- while(((val = *addr) & 0x00800080) != 0x00800080) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- rc = ERR_TIMOUT;
- /* suspend program command */
- *addr = 0x00B000B0;
- goto outahere;
- }
- }
-
- /* check for errors */
- if(val & 0x001A001A) {
- printf("\nFlash write error %02x at address %08lx\n",
- (int)val, (unsigned long)dest);
- if(val & 0x00080008) {
- printf("Voltage range error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if(val & 0x00020002) {
- printf("Device protect error.\n");
- rc = ERR_PROTECTED;
- goto outahere;
- }
- if(val & 0x00100010) {
- printf("Programming error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
-
-outahere:
- /* read array command */
- *addr = 0x00FF00FF;
- if (flag) enable_interrupts();
-
- return rc;
-}
-
-
-/**
- * write_buf: - Copy memory to flash.
- *
- * @param info:
- * @param src: source of copy transaction
- * @param addr: where to copy to
- * @param cnt: number of bytes to copy
- *
- * @return error code
- */
-
-/* "long" version, uses 32bit words */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- ulong data;
- int l;
- int i, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 24);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 24);
- }
-
- if ((rc = write_long(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = *((ulong*)src);
- if ((rc = write_long(info, wp, data)) != 0) {
- return (rc);
- }
- src += 4;
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) return ERR_OK;
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 24);
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 24);
- }
-
- return write_long(info, wp, data);
-}
diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
index 665aedf..c41f11d 100644
--- a/board/davedenx/qong/qong.c
+++ b/board/davedenx/qong/qong.c
@@ -231,7 +231,7 @@ static void board_nand_setup(void)
mxc_setup_weimcs(3, &cs3);
- __REG(IOMUXC_GPR) |= 1 << 13;
+ mx31_set_gpr(MUX_SDCTL_CSD1_SEL, 1);
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_WP, MUX_CTL_IN_GPIO));
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_NFC_CE, MUX_CTL_IN_GPIO));
diff --git a/board/davinci/dm6467evm/dm6467evm.c b/board/davinci/dm6467evm/dm6467evm.c
index 1a01c3c..ac82d5c 100644
--- a/board/davinci/dm6467evm/dm6467evm.c
+++ b/board/davinci/dm6467evm/dm6467evm.c
@@ -24,6 +24,26 @@
DECLARE_GLOBAL_DATA_PTR;
+#define REV_DM6467EVM 0
+#define REV_DM6467TEVM 1
+/*
+ * get_board_rev() - setup to pass kernel board revision information
+ * Returns:
+ * bit[0-3] System clock frequency
+ * 0000b - 27 MHz
+ * 0001b - 33 MHz
+ */
+u32 get_board_rev(void)
+{
+
+#ifdef DAVINCI_DM6467TEVM
+ return REV_DM6467TEVM;
+#else
+ return REV_DM6467EVM;
+#endif
+
+}
+
int board_init(void)
{
gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM6467_EVM;
diff --git a/board/denx/m28evk/Makefile b/board/denx/m28evk/Makefile
new file mode 100644
index 0000000..b6f002f
--- /dev/null
+++ b/board/denx/m28evk/Makefile
@@ -0,0 +1,56 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+ifndef CONFIG_SPL_BUILD
+COBJS := m28evk.o
+endif
+
+ifdef CONFIG_SPL_BUILD
+COBJS := mem_init.o mmc_boot.o power_init.o memsize.o
+endif
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+all: $(ALL)
+
+ifdef CONFIG_SPL_BUILD
+memsize.c:
+ ln -sf $(TOPDIR)/common/memsize.c $@
+endif
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/arch/arm/cpu/armv7/omap4/sys_info.c b/board/denx/m28evk/m28_init.h
index b9e5765..98d3631 100644
--- a/arch/arm/cpu/armv7/omap4/sys_info.c
+++ b/board/denx/m28evk/m28_init.h
@@ -1,10 +1,11 @@
/*
- * (C) Copyright 2010
- * Texas Instruments, <www.ti.com>
+ * Freescale i.MX28 SPL functions
*
- * Author :
- * Aneesh V <aneesh@ti.com>
- * Steve Sakoman <steve@sakoman.com>
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -13,7 +14,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -22,32 +23,19 @@
* MA 02111-1307 USA
*/
-#include <common.h>
-#include <asm/arch/sys_proto.h>
+#ifndef __M28_INIT_H__
+#define __M28_INIT_H__
-/*
- * get_device_type(): tell if GP/HS/EMU/TST
- */
-u32 get_device_type(void)
-{
- return 0;
-}
+void early_delay(int delay);
-/*
- * get_board_rev() - get board revision
- */
-u32 get_board_rev(void)
-{
- return 0x20;
-}
+void mx28_power_init(void);
-/*
- * Print CPU information
- */
-int print_cpuinfo(void)
-{
+#ifdef CONFIG_SPL_MX28_PSWITCH_WAIT
+void mx28_power_wait_pswitch(void);
+#else
+static inline void mx28_power_wait_pswitch(void) { }
+#endif
- puts("CPU : OMAP4430\n");
+void mx28_mem_init(void);
- return 0;
-}
+#endif /* __M28_INIT_H__ */
diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
new file mode 100644
index 0000000..8cf3dc9
--- /dev/null
+++ b/board/denx/m28evk/m28evk.c
@@ -0,0 +1,216 @@
+/*
+ * DENX M28 module
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/sys_proto.h>
+#include <linux/mii.h>
+#include <miiphy.h>
+#include <netdev.h>
+#include <errno.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Functions
+ */
+int board_early_init_f(void)
+{
+ /* IO0 clock at 480MHz */
+ mx28_set_ioclk(MXC_IOCLK0, 480000);
+ /* IO1 clock at 480MHz */
+ mx28_set_ioclk(MXC_IOCLK1, 480000);
+
+ /* SSP0 clock at 96MHz */
+ mx28_set_sspclk(MXC_SSPCLK0, 96000, 0);
+ /* SSP2 clock at 96MHz */
+ mx28_set_sspclk(MXC_SSPCLK2, 96000, 0);
+
+#ifdef CONFIG_CMD_USB
+ mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT);
+ mxs_iomux_setup_pad(MX28_PAD_AUART3_TX__GPIO_3_13 |
+ MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP);
+ gpio_direction_output(MX28_PAD_AUART3_TX__GPIO_3_13, 0);
+#endif
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ return 0;
+}
+
+#define HW_DIGCTRL_SCRATCH0 0x8001c280
+#define HW_DIGCTRL_SCRATCH1 0x8001c290
+int dram_init(void)
+{
+ uint32_t sz[2];
+
+ sz[0] = readl(HW_DIGCTRL_SCRATCH0);
+ sz[1] = readl(HW_DIGCTRL_SCRATCH1);
+
+ if (sz[0] != sz[1]) {
+ printf("MX28:\n"
+ "Error, the RAM size in HW_DIGCTRL_SCRATCH0 and\n"
+ "HW_DIGCTRL_SCRATCH1 is not the same. Please\n"
+ "verify these two registers contain valid RAM size!\n");
+ hang();
+ }
+
+ gd->ram_size = sz[0];
+ return 0;
+}
+
+#ifdef CONFIG_CMD_MMC
+static int m28_mmc_wp(int id)
+{
+ if (id != 0) {
+ printf("MXS MMC: Invalid card selected (card id = %d)\n", id);
+ return 1;
+ }
+
+ return gpio_get_value(MX28_PAD_AUART2_CTS__GPIO_3_10);
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ /* Configure WP as output */
+ gpio_direction_input(MX28_PAD_AUART2_CTS__GPIO_3_10);
+
+ return mxsmmc_initialize(bis, 0, m28_mmc_wp);
+}
+#endif
+
+#ifdef CONFIG_CMD_NET
+
+#define MII_OPMODE_STRAP_OVERRIDE 0x16
+#define MII_PHY_CTRL1 0x1e
+#define MII_PHY_CTRL2 0x1f
+
+int fecmxc_mii_postcall(int phy)
+{
+ miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
+ miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
+ if (phy == 3)
+ miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8180);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ struct eth_device *dev;
+ int ret;
+
+ ret = cpu_eth_init(bis);
+
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_enet,
+ CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,
+ CLKCTRL_ENET_TIME_SEL_RMII_CLK);
+
+ ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
+ if (ret) {
+ printf("FEC MXS: Unable to init FEC0\n");
+ return ret;
+ }
+
+ ret = fecmxc_initialize_multi(bis, 1, 3, MXS_ENET1_BASE);
+ if (ret) {
+ printf("FEC MXS: Unable to init FEC1\n");
+ return ret;
+ }
+
+ dev = eth_get_dev_by_name("FEC0");
+ if (!dev) {
+ printf("FEC MXS: Unable to get FEC0 device entry\n");
+ return -EINVAL;
+ }
+
+ ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
+ if (ret) {
+ printf("FEC MXS: Unable to register FEC0 mii postcall\n");
+ return ret;
+ }
+
+ dev = eth_get_dev_by_name("FEC1");
+ if (!dev) {
+ printf("FEC MXS: Unable to get FEC1 device entry\n");
+ return -EINVAL;
+ }
+
+ ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
+ if (ret) {
+ printf("FEC MXS: Unable to register FEC1 mii postcall\n");
+ return ret;
+ }
+
+ return ret;
+}
+
+#ifdef CONFIG_M28_FEC_MAC_IN_OCOTP
+
+#define MXS_OCOTP_MAX_TIMEOUT 1000000
+void imx_get_mac_from_fuse(char *mac)
+{
+ struct mx28_ocotp_regs *ocotp_regs =
+ (struct mx28_ocotp_regs *)MXS_OCOTP_BASE;
+ uint32_t data;
+
+ memset(mac, 0, 6);
+
+ writel(OCOTP_CTRL_RD_BANK_OPEN, &ocotp_regs->hw_ocotp_ctrl_set);
+
+ if (mx28_wait_mask_clr(&ocotp_regs->hw_ocotp_ctrl_reg, OCOTP_CTRL_BUSY,
+ MXS_OCOTP_MAX_TIMEOUT)) {
+ printf("MXS FEC: Can't get MAC from OCOTP\n");
+ return;
+ }
+
+ data = readl(&ocotp_regs->hw_ocotp_cust0);
+
+ mac[0] = 0x00;
+ mac[1] = 0x04;
+ mac[2] = (data >> 24) & 0xff;
+ mac[3] = (data >> 16) & 0xff;
+ mac[4] = (data >> 8) & 0xff;
+ mac[5] = data & 0xff;
+}
+#else
+void imx_get_mac_from_fuse(char *mac)
+{
+ memset(mac, 0, 6);
+}
+#endif
+
+#endif
diff --git a/board/denx/m28evk/mem_init.c b/board/denx/m28evk/mem_init.c
new file mode 100644
index 0000000..17d1f9b
--- /dev/null
+++ b/board/denx/m28evk/mem_init.c
@@ -0,0 +1,240 @@
+/*
+ * Freescale i.MX28 RAM init
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/iomux-mx28.h>
+#include <asm/arch/imx-regs.h>
+
+#include "m28_init.h"
+
+uint32_t dram_vals[] = {
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000100, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00010101, 0x01010101, 0x000f0f01, 0x0f02020a,
+ 0x00000000, 0x00010101, 0x00000100, 0x00000100, 0x00000000,
+ 0x00000002, 0x01010000, 0x05060302, 0x06005003, 0x0a0000c8,
+ 0x02009c40, 0x0000030c, 0x0036a609, 0x031a0612, 0x02030202,
+ 0x00c8001c, 0x00000000, 0x00000000, 0x00012100, 0xffff0303,
+ 0x00012100, 0xffff0303, 0x00012100, 0xffff0303, 0x00012100,
+ 0xffff0303, 0x00000003, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000612, 0x01000F02, 0x06120612, 0x00000200,
+ 0x00020007, 0xf5014b27, 0xf5014b27, 0xf5014b27, 0xf5014b27,
+ 0x07000300, 0x07000300, 0x07000300, 0x07000300, 0x00000006,
+ 0x00000000, 0x00000000, 0x01000000, 0x01020408, 0x08040201,
+ 0x000f1133, 0x00000000, 0x00001f04, 0x00001f04, 0x00001f04,
+ 0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04, 0x00001f04,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x00000000, 0x00010000, 0x00020304, 0x00000004,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000,
+ 0x00000000, 0x01010000, 0x01000000, 0x03030000, 0x00010303,
+ 0x01020202, 0x00000000, 0x02040303, 0x21002103, 0x00061200,
+ 0x06120612, 0x04320432, 0x04320432, 0x00040004, 0x00040004,
+ 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00010001
+};
+
+void init_m28_200mhz_ddr2(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dram_vals); i++)
+ writel(dram_vals[i], MXS_DRAM_BASE + (4 * i));
+}
+
+void mx28_mem_init_clock(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ /* Gate EMI clock */
+ writel(CLKCTRL_FRAC0_CLKGATEEMI,
+ &clkctrl_regs->hw_clkctrl_frac0_set);
+
+ /* EMI = 205MHz */
+ writel(CLKCTRL_FRAC0_EMIFRAC_MASK,
+ &clkctrl_regs->hw_clkctrl_frac0_set);
+ writel((0x2a << CLKCTRL_FRAC0_EMIFRAC_OFFSET) &
+ CLKCTRL_FRAC0_EMIFRAC_MASK,
+ &clkctrl_regs->hw_clkctrl_frac0_clr);
+
+ /* Ungate EMI clock */
+ writel(CLKCTRL_FRAC0_CLKGATEEMI,
+ &clkctrl_regs->hw_clkctrl_frac0_clr);
+
+ early_delay(11000);
+
+ writel((2 << CLKCTRL_EMI_DIV_EMI_OFFSET) |
+ (1 << CLKCTRL_EMI_DIV_XTAL_OFFSET),
+ &clkctrl_regs->hw_clkctrl_emi);
+
+ /* Unbypass EMI */
+ writel(CLKCTRL_CLKSEQ_BYPASS_EMI,
+ &clkctrl_regs->hw_clkctrl_clkseq_clr);
+
+ early_delay(10000);
+}
+
+void mx28_mem_setup_cpu_and_hbus(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ /* CPU = 454MHz and ungate CPU clock */
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_frac0,
+ CLKCTRL_FRAC0_CPUFRAC_MASK | CLKCTRL_FRAC0_CLKGATECPU,
+ 19 << CLKCTRL_FRAC0_CPUFRAC_OFFSET);
+
+ /* Set CPU bypass */
+ writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+ &clkctrl_regs->hw_clkctrl_clkseq_set);
+
+ /* HBUS = 151MHz */
+ writel(CLKCTRL_HBUS_DIV_MASK, &clkctrl_regs->hw_clkctrl_hbus_set);
+ writel(((~3) << CLKCTRL_HBUS_DIV_OFFSET) & CLKCTRL_HBUS_DIV_MASK,
+ &clkctrl_regs->hw_clkctrl_hbus_clr);
+
+ early_delay(10000);
+
+ /* CPU clock divider = 1 */
+ clrsetbits_le32(&clkctrl_regs->hw_clkctrl_cpu,
+ CLKCTRL_CPU_DIV_CPU_MASK, 1);
+
+ /* Disable CPU bypass */
+ writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+ &clkctrl_regs->hw_clkctrl_clkseq_clr);
+}
+
+void mx28_mem_setup_vdda(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ writel((0xc << POWER_VDDACTRL_TRG_OFFSET) |
+ (0x7 << POWER_VDDACTRL_BO_OFFSET_OFFSET) |
+ POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW,
+ &power_regs->hw_power_vddactrl);
+}
+
+void mx28_mem_setup_vddd(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ writel((0x1c << POWER_VDDDCTRL_TRG_OFFSET) |
+ (0x7 << POWER_VDDDCTRL_BO_OFFSET_OFFSET) |
+ POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW,
+ &power_regs->hw_power_vdddctrl);
+}
+
+#define HW_DIGCTRL_SCRATCH0 0x8001c280
+#define HW_DIGCTRL_SCRATCH1 0x8001c290
+void data_abort_memdetect_handler(void) __attribute__((naked));
+void data_abort_memdetect_handler(void)
+{
+ asm volatile("subs pc, r14, #4");
+}
+
+void mx28_mem_get_size(void)
+{
+ uint32_t sz, da;
+ uint32_t *vt = (uint32_t *)0x20;
+
+ /* Replace the DABT handler. */
+ da = vt[4];
+ vt[4] = (uint32_t)&data_abort_memdetect_handler;
+
+ sz = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+ writel(sz, HW_DIGCTRL_SCRATCH0);
+ writel(sz, HW_DIGCTRL_SCRATCH1);
+
+ /* Restore the old DABT handler. */
+ vt[4] = da;
+}
+
+void mx28_mem_init(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ struct mx28_pinctrl_regs *pinctrl_regs =
+ (struct mx28_pinctrl_regs *)MXS_PINCTRL_BASE;
+
+ /* Set DDR2 mode */
+ writel(PINCTRL_EMI_DS_CTRL_DDR_MODE_DDR2,
+ &pinctrl_regs->hw_pinctrl_emi_ds_ctrl_set);
+
+ /* Power up PLL0 */
+ writel(CLKCTRL_PLL0CTRL0_POWER,
+ &clkctrl_regs->hw_clkctrl_pll0ctrl0_set);
+
+ early_delay(11000);
+
+ mx28_mem_init_clock();
+
+ mx28_mem_setup_vdda();
+
+ /*
+ * Configure the DRAM registers
+ */
+
+ /* Clear START bit from DRAM_CTL16 */
+ clrbits_le32(MXS_DRAM_BASE + 0x40, 1);
+
+ init_m28_200mhz_ddr2();
+
+ /* Clear SREFRESH bit from DRAM_CTL17 */
+ clrbits_le32(MXS_DRAM_BASE + 0x44, 1);
+
+ /* Set START bit in DRAM_CTL16 */
+ setbits_le32(MXS_DRAM_BASE + 0x40, 1);
+
+ /* Wait for bit 20 (DRAM init complete) in DRAM_CTL58 */
+ while (!(readl(MXS_DRAM_BASE + 0xe8) & (1 << 20)))
+ ;
+
+ mx28_mem_setup_vddd();
+
+ early_delay(10000);
+
+ mx28_mem_setup_cpu_and_hbus();
+
+ mx28_mem_get_size();
+}
diff --git a/board/denx/m28evk/mmc_boot.c b/board/denx/m28evk/mmc_boot.c
new file mode 100644
index 0000000..86d3ab5
--- /dev/null
+++ b/board/denx/m28evk/mmc_boot.c
@@ -0,0 +1,273 @@
+/*
+ * Freescale i.MX28 Boot setup
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/iomux-mx28.h>
+
+#include "m28_init.h"
+
+/*
+ * This delay function is intended to be used only in early stage of boot, where
+ * clock are not set up yet. The timer used here is reset on every boot and
+ * takes a few seconds to roll. The boot doesn't take that long, so to keep the
+ * code simple, it doesn't take rolling into consideration.
+ */
+#define HW_DIGCTRL_MICROSECONDS 0x8001c0c0
+void early_delay(int delay)
+{
+ uint32_t st = readl(HW_DIGCTRL_MICROSECONDS);
+ st += delay;
+ while (st > readl(HW_DIGCTRL_MICROSECONDS))
+ ;
+}
+
+#define MUX_CONFIG_LED (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
+#define MUX_CONFIG_LCD (MXS_PAD_3V3 | MXS_PAD_4MA)
+#define MUX_CONFIG_TSC (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_GPMI (MXS_PAD_1V8 | MXS_PAD_4MA | MXS_PAD_NOPULL)
+#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
+
+const iomux_cfg_t iomux_setup[] = {
+ /* LED */
+ MX28_PAD_ENET0_RXD3__GPIO_4_10 | MUX_CONFIG_LED,
+
+ /* framebuffer */
+ MX28_PAD_LCD_D00__LCD_D0 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D01__LCD_D1 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D02__LCD_D2 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D03__LCD_D3 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D04__LCD_D4 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D05__LCD_D5 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D06__LCD_D6 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D07__LCD_D7 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D08__LCD_D8 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D09__LCD_D9 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D10__LCD_D10 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D11__LCD_D11 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D12__LCD_D12 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D13__LCD_D13 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D14__LCD_D14 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D15__LCD_D15 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D16__LCD_D16 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D17__LCD_D17 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D18__LCD_D18 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D19__LCD_D19 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D20__LCD_D20 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D21__LCD_D21 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D22__LCD_D22 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_D23__LCD_D23 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_RD_E__LCD_VSYNC | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_WR_RWN__LCD_HSYNC | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_RS__LCD_DOTCLK | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_CS__LCD_CS | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_VSYNC__LCD_VSYNC | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_HSYNC__LCD_HSYNC | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_DOTCLK__LCD_DOTCLK | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_ENABLE__GPIO_1_31 | MUX_CONFIG_LCD,
+ MX28_PAD_LCD_RESET__GPIO_3_30 | MUX_CONFIG_LCD,
+
+ /* UART1 */
+ MX28_PAD_PWM0__DUART_RX,
+ MX28_PAD_PWM1__DUART_TX,
+ MX28_PAD_AUART0_TX__DUART_RTS,
+ MX28_PAD_AUART0_RX__DUART_CTS,
+
+ /* UART2 */
+ MX28_PAD_AUART1_RX__AUART1_RX,
+ MX28_PAD_AUART1_TX__AUART1_TX,
+ MX28_PAD_AUART1_RTS__AUART1_RTS,
+ MX28_PAD_AUART1_CTS__AUART1_CTS,
+
+ /* CAN */
+ MX28_PAD_GPMI_RDY2__CAN0_TX,
+ MX28_PAD_GPMI_RDY3__CAN0_RX,
+
+ /* I2C */
+ MX28_PAD_I2C0_SCL__I2C0_SCL,
+ MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+ /* TSC2007 */
+ MX28_PAD_SAIF0_MCLK__GPIO_3_20 | MUX_CONFIG_TSC,
+
+ /* MMC0 */
+ MX28_PAD_SSP0_DATA0__SSP0_D0 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA1__SSP0_D1 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA2__SSP0_D2 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA3__SSP0_D3 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA4__SSP0_D4 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA5__SSP0_D5 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA6__SSP0_D6 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DATA7__SSP0_D7 | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_CMD__SSP0_CMD | MUX_CONFIG_SSP0,
+ MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT |
+ (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
+ MX28_PAD_SSP0_SCK__SSP0_SCK |
+ (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
+ MX28_PAD_PWM3__GPIO_3_28 | MUX_CONFIG_SSP0, /* Power .. FIXME */
+ MX28_PAD_AUART2_CTS__GPIO_3_10, /* WP ... FIXME */
+
+ /* GPMI NAND */
+ MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RDN__GPMI_RDN |
+ (MXS_PAD_1V8 | MXS_PAD_8MA | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
+
+ /* FEC Ethernet */
+ MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RX_EN__ENET0_RX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TX_EN__ENET0_TX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD0__ENET0_RXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD1__ENET0_RXD1 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD0__ENET0_TXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD1__ENET0_TXD1 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET_CLK__CLKCTRL_ENET | MUX_CONFIG_ENET,
+
+ MX28_PAD_ENET0_COL__ENET1_TX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_CRS__ENET1_RX_EN | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD2__ENET1_RXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
+ MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
+
+ /* I2C */
+ MX28_PAD_I2C0_SCL__I2C0_SCL,
+ MX28_PAD_I2C0_SDA__I2C0_SDA,
+
+ /* EMI */
+ MX28_PAD_EMI_D00__EMI_DATA0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D01__EMI_DATA1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D02__EMI_DATA2 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D03__EMI_DATA3 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D04__EMI_DATA4 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D05__EMI_DATA5 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D06__EMI_DATA6 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D07__EMI_DATA7 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D08__EMI_DATA8 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D09__EMI_DATA9 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D10__EMI_DATA10 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D11__EMI_DATA11 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D12__EMI_DATA12 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D13__EMI_DATA13 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D14__EMI_DATA14 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_D15__EMI_DATA15 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_ODT0__EMI_ODT0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_ODT1__EMI_ODT1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DDR_OPEN_FB__EMI_DDR_OPEN_FEEDBACK | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_DDR_OPEN__EMI_DDR_OPEN | MUX_CONFIG_EMI,
+
+ MX28_PAD_EMI_A00__EMI_ADDR0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A01__EMI_ADDR1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A02__EMI_ADDR2 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A03__EMI_ADDR3 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A04__EMI_ADDR4 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A05__EMI_ADDR5 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A06__EMI_ADDR6 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A07__EMI_ADDR7 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A08__EMI_ADDR8 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A09__EMI_ADDR9 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A10__EMI_ADDR10 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A11__EMI_ADDR11 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A12__EMI_ADDR12 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A13__EMI_ADDR13 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_A14__EMI_ADDR14 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_BA2__EMI_BA2 | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI,
+ MX28_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI,
+
+ /* SPI2 (for flash) */
+ MX28_PAD_SSP2_SCK__SSP2_SCK | MUX_CONFIG_SSP2,
+ MX28_PAD_SSP2_MOSI__SSP2_CMD | MUX_CONFIG_SSP2,
+ MX28_PAD_SSP2_MISO__SSP2_D0 | MUX_CONFIG_SSP2,
+ MX28_PAD_SSP2_SS0__SSP2_D3 |
+ (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
+};
+
+void board_init_ll(void)
+{
+ mxs_iomux_setup_multiple_pads(iomux_setup, ARRAY_SIZE(iomux_setup));
+ mx28_power_init();
+ mx28_mem_init();
+ mx28_power_wait_pswitch();
+}
+
+/* Support aparatus */
+inline void board_init_f(unsigned long bootflag)
+{
+ for (;;)
+ ;
+}
+
+inline void board_init_r(gd_t *id, ulong dest_addr)
+{
+ for (;;)
+ ;
+}
+
+inline int printf(const char *fmt, ...)
+{
+ return 0;
+}
+
+inline void __coloured_LED_init(void) {}
+inline void __red_LED_on(void) {}
+void coloured_LED_init(void)
+ __attribute__((weak, alias("__coloured_LED_init")));
+void red_LED_on(void)
+ __attribute__((weak, alias("__red_LED_on")));
+void hang(void) __attribute__ ((noreturn));
+void hang(void)
+{
+ for (;;)
+ ;
+}
diff --git a/board/denx/m28evk/power_init.c b/board/denx/m28evk/power_init.c
new file mode 100644
index 0000000..27322b4
--- /dev/null
+++ b/board/denx/m28evk/power_init.c
@@ -0,0 +1,913 @@
+/*
+ * Freescale i.MX28 Boot PMIC init
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <config.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+
+#include "m28_init.h"
+
+void mx28_power_clock2xtal(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ /* Set XTAL as CPU reference clock */
+ writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+ &clkctrl_regs->hw_clkctrl_clkseq_set);
+}
+
+void mx28_power_clock2pll(void)
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ writel(CLKCTRL_PLL0CTRL0_POWER,
+ &clkctrl_regs->hw_clkctrl_pll0ctrl0_set);
+ early_delay(100);
+ writel(CLKCTRL_CLKSEQ_BYPASS_CPU,
+ &clkctrl_regs->hw_clkctrl_clkseq_clr);
+}
+
+void mx28_power_clear_auto_restart(void)
+{
+ struct mx28_rtc_regs *rtc_regs =
+ (struct mx28_rtc_regs *)MXS_RTC_BASE;
+
+ writel(RTC_CTRL_SFTRST, &rtc_regs->hw_rtc_ctrl_clr);
+ while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_SFTRST)
+ ;
+
+ writel(RTC_CTRL_CLKGATE, &rtc_regs->hw_rtc_ctrl_clr);
+ while (readl(&rtc_regs->hw_rtc_ctrl) & RTC_CTRL_CLKGATE)
+ ;
+
+ /*
+ * Due to the hardware design bug of mx28 EVK-A
+ * we need to set the AUTO_RESTART bit.
+ */
+ if (readl(&rtc_regs->hw_rtc_persistent0) & RTC_PERSISTENT0_AUTO_RESTART)
+ return;
+
+ while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
+ ;
+
+ setbits_le32(&rtc_regs->hw_rtc_persistent0,
+ RTC_PERSISTENT0_AUTO_RESTART);
+ writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_set);
+ writel(RTC_CTRL_FORCE_UPDATE, &rtc_regs->hw_rtc_ctrl_clr);
+ while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_NEW_REGS_MASK)
+ ;
+ while (readl(&rtc_regs->hw_rtc_stat) & RTC_STAT_STALE_REGS_MASK)
+ ;
+}
+
+void mx28_power_set_linreg(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ /* Set linear regulator 25mV below switching converter */
+ clrsetbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_LINREG_OFFSET_MASK,
+ POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
+
+ clrsetbits_le32(&power_regs->hw_power_vddactrl,
+ POWER_VDDACTRL_LINREG_OFFSET_MASK,
+ POWER_VDDACTRL_LINREG_OFFSET_1STEPS_BELOW);
+
+ clrsetbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_LINREG_OFFSET_MASK,
+ POWER_VDDIOCTRL_LINREG_OFFSET_1STEPS_BELOW);
+}
+
+void mx28_power_setup_5v_detect(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ /* Start 5V detection */
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_VBUSVALID_TRSH_MASK,
+ POWER_5VCTRL_VBUSVALID_TRSH_4V4 |
+ POWER_5VCTRL_PWRUP_VBUS_CMPS);
+}
+
+void mx28_src_power_init(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ /* Improve efficieny and reduce transient ripple */
+ writel(POWER_LOOPCTRL_TOGGLE_DIF | POWER_LOOPCTRL_EN_CM_HYST |
+ POWER_LOOPCTRL_EN_DF_HYST, &power_regs->hw_power_loopctrl_set);
+
+ clrsetbits_le32(&power_regs->hw_power_dclimits,
+ POWER_DCLIMITS_POSLIMIT_BUCK_MASK,
+ 0x30 << POWER_DCLIMITS_POSLIMIT_BUCK_OFFSET);
+
+ setbits_le32(&power_regs->hw_power_battmonitor,
+ POWER_BATTMONITOR_EN_BATADJ);
+
+ /* Increase the RCSCALE level for quick DCDC response to dynamic load */
+ clrsetbits_le32(&power_regs->hw_power_loopctrl,
+ POWER_LOOPCTRL_EN_RCSCALE_MASK,
+ POWER_LOOPCTRL_RCSCALE_THRESH |
+ POWER_LOOPCTRL_EN_RCSCALE_8X);
+
+ clrsetbits_le32(&power_regs->hw_power_minpwr,
+ POWER_MINPWR_HALFFETS, POWER_MINPWR_DOUBLE_FETS);
+
+ /* 5V to battery handoff ... FIXME */
+ setbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+ early_delay(30);
+ clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_DCDC_XFER);
+}
+
+void mx28_power_init_4p2_params(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ /* Setup 4P2 parameters */
+ clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_CMPTRIP_MASK | POWER_DCDC4P2_TRG_MASK,
+ POWER_DCDC4P2_TRG_4V2 | (31 << POWER_DCDC4P2_CMPTRIP_OFFSET));
+
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_HEADROOM_ADJ_MASK,
+ 0x4 << POWER_5VCTRL_HEADROOM_ADJ_OFFSET);
+
+ clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_DROPOUT_CTRL_MASK,
+ POWER_DCDC4P2_DROPOUT_CTRL_100MV |
+ POWER_DCDC4P2_DROPOUT_CTRL_SRC_SEL);
+
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
+ 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+}
+
+void mx28_enable_4p2_dcdc_input(int xfer)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t tmp, vbus_thresh, vbus_5vdetect, pwd_bo;
+ uint32_t prev_5v_brnout, prev_5v_droop;
+
+ prev_5v_brnout = readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_PWDN_5VBRNOUT;
+ prev_5v_droop = readl(&power_regs->hw_power_ctrl) &
+ POWER_CTRL_ENIRQ_VDD5V_DROOP;
+
+ clrbits_le32(&power_regs->hw_power_5vctrl, POWER_5VCTRL_PWDN_5VBRNOUT);
+ writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
+ &power_regs->hw_power_reset);
+
+ clrbits_le32(&power_regs->hw_power_ctrl, POWER_CTRL_ENIRQ_VDD5V_DROOP);
+
+ if (xfer && (readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_ENABLE_DCDC)) {
+ return;
+ }
+
+ /*
+ * Recording orignal values that will be modified temporarlily
+ * to handle a chip bug. See chip errata for CQ ENGR00115837
+ */
+ tmp = readl(&power_regs->hw_power_5vctrl);
+ vbus_thresh = tmp & POWER_5VCTRL_VBUSVALID_TRSH_MASK;
+ vbus_5vdetect = tmp & POWER_5VCTRL_VBUSVALID_5VDETECT;
+
+ pwd_bo = readl(&power_regs->hw_power_minpwr) & POWER_MINPWR_PWD_BO;
+
+ /*
+ * Disable mechanisms that get erroneously tripped by when setting
+ * the DCDC4P2 EN_DCDC
+ */
+ clrbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_VBUSVALID_5VDETECT |
+ POWER_5VCTRL_VBUSVALID_TRSH_MASK);
+
+ writel(POWER_MINPWR_PWD_BO, &power_regs->hw_power_minpwr_set);
+
+ if (xfer) {
+ setbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_DCDC_XFER);
+ early_delay(20);
+ clrbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_DCDC_XFER);
+
+ setbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_ENABLE_DCDC);
+ } else {
+ setbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_ENABLE_DCDC);
+ }
+
+ early_delay(25);
+
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_VBUSVALID_TRSH_MASK, vbus_thresh);
+
+ if (vbus_5vdetect)
+ writel(vbus_5vdetect, &power_regs->hw_power_5vctrl_set);
+
+ if (!pwd_bo)
+ clrbits_le32(&power_regs->hw_power_minpwr, POWER_MINPWR_PWD_BO);
+
+ while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ)
+ clrbits_le32(&power_regs->hw_power_ctrl,
+ POWER_CTRL_VBUS_VALID_IRQ);
+
+ if (prev_5v_brnout) {
+ writel(POWER_5VCTRL_PWDN_5VBRNOUT,
+ &power_regs->hw_power_5vctrl_set);
+ writel(POWER_RESET_UNLOCK_KEY,
+ &power_regs->hw_power_reset);
+ } else {
+ writel(POWER_5VCTRL_PWDN_5VBRNOUT,
+ &power_regs->hw_power_5vctrl_clr);
+ writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
+ &power_regs->hw_power_reset);
+ }
+
+ while (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VDD5V_DROOP_IRQ)
+ clrbits_le32(&power_regs->hw_power_ctrl,
+ POWER_CTRL_VDD5V_DROOP_IRQ);
+
+ if (prev_5v_droop)
+ clrbits_le32(&power_regs->hw_power_ctrl,
+ POWER_CTRL_ENIRQ_VDD5V_DROOP);
+ else
+ setbits_le32(&power_regs->hw_power_ctrl,
+ POWER_CTRL_ENIRQ_VDD5V_DROOP);
+}
+
+void mx28_power_init_4p2_regulator(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t tmp, tmp2;
+
+ setbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_ENABLE_4P2);
+
+ writel(POWER_CHARGE_ENABLE_LOAD, &power_regs->hw_power_charge_set);
+
+ writel(POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
+ &power_regs->hw_power_5vctrl_clr);
+ clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_TRG_MASK);
+
+ /* Power up the 4p2 rail and logic/control */
+ writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+ &power_regs->hw_power_5vctrl_clr);
+
+ /*
+ * Start charging up the 4p2 capacitor. We ramp of this charge
+ * gradually to avoid large inrush current from the 5V cable which can
+ * cause transients/problems
+ */
+ mx28_enable_4p2_dcdc_input(0);
+
+ if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
+ /*
+ * If we arrived here, we were unable to recover from mx23 chip
+ * errata 5837. 4P2 is disabled and sufficient battery power is
+ * not present. Exiting to not enable DCDC power during 5V
+ * connected state.
+ */
+ clrbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_ENABLE_DCDC);
+ writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+ &power_regs->hw_power_5vctrl_set);
+ hang();
+ }
+
+ /*
+ * Here we set the 4p2 brownout level to something very close to 4.2V.
+ * We then check the brownout status. If the brownout status is false,
+ * the voltage is already close to the target voltage of 4.2V so we
+ * can go ahead and set the 4P2 current limit to our max target limit.
+ * If the brownout status is true, we need to ramp us the current limit
+ * so that we don't cause large inrush current issues. We step up the
+ * current limit until the brownout status is false or until we've
+ * reached our maximum defined 4p2 current limit.
+ */
+ clrsetbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_BO_MASK,
+ 22 << POWER_DCDC4P2_BO_OFFSET); /* 4.15V */
+
+ if (!(readl(&power_regs->hw_power_sts) & POWER_STS_DCDC_4P2_BO)) {
+ setbits_le32(&power_regs->hw_power_5vctrl,
+ 0x3f << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+ } else {
+ tmp = (readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK) >>
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
+ while (tmp < 0x3f) {
+ if (!(readl(&power_regs->hw_power_sts) &
+ POWER_STS_DCDC_4P2_BO)) {
+ tmp = readl(&power_regs->hw_power_5vctrl);
+ tmp |= POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
+ early_delay(100);
+ writel(tmp, &power_regs->hw_power_5vctrl);
+ break;
+ } else {
+ tmp++;
+ tmp2 = readl(&power_regs->hw_power_5vctrl);
+ tmp2 &= ~POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK;
+ tmp2 |= tmp <<
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET;
+ writel(tmp2, &power_regs->hw_power_5vctrl);
+ early_delay(100);
+ }
+ }
+ }
+
+ clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK);
+ writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+}
+
+void mx28_power_init_dcdc_4p2_source(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ if (!(readl(&power_regs->hw_power_dcdc4p2) &
+ POWER_DCDC4P2_ENABLE_DCDC)) {
+ hang();
+ }
+
+ mx28_enable_4p2_dcdc_input(1);
+
+ if (readl(&power_regs->hw_power_ctrl) & POWER_CTRL_VBUS_VALID_IRQ) {
+ clrbits_le32(&power_regs->hw_power_dcdc4p2,
+ POWER_DCDC4P2_ENABLE_DCDC);
+ writel(POWER_5VCTRL_ENABLE_DCDC,
+ &power_regs->hw_power_5vctrl_clr);
+ writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+ &power_regs->hw_power_5vctrl_set);
+ }
+}
+
+void mx28_power_enable_4p2(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t vdddctrl, vddactrl, vddioctrl;
+ uint32_t tmp;
+
+ vdddctrl = readl(&power_regs->hw_power_vdddctrl);
+ vddactrl = readl(&power_regs->hw_power_vddactrl);
+ vddioctrl = readl(&power_regs->hw_power_vddioctrl);
+
+ setbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
+ POWER_VDDDCTRL_PWDN_BRNOUT);
+
+ setbits_le32(&power_regs->hw_power_vddactrl,
+ POWER_VDDACTRL_DISABLE_FET | POWER_VDDACTRL_ENABLE_LINREG |
+ POWER_VDDACTRL_PWDN_BRNOUT);
+
+ setbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_DISABLE_FET | POWER_VDDIOCTRL_PWDN_BRNOUT);
+
+ mx28_power_init_4p2_params();
+ mx28_power_init_4p2_regulator();
+
+ /* Shutdown battery (none present) */
+ clrbits_le32(&power_regs->hw_power_dcdc4p2, POWER_DCDC4P2_BO_MASK);
+ writel(POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+ writel(POWER_CTRL_ENIRQ_DCDC4P2_BO, &power_regs->hw_power_ctrl_clr);
+
+ mx28_power_init_dcdc_4p2_source();
+
+ writel(vdddctrl, &power_regs->hw_power_vdddctrl);
+ early_delay(20);
+ writel(vddactrl, &power_regs->hw_power_vddactrl);
+ early_delay(20);
+ writel(vddioctrl, &power_regs->hw_power_vddioctrl);
+
+ /*
+ * Check if FET is enabled on either powerout and if so,
+ * disable load.
+ */
+ tmp = 0;
+ tmp |= !(readl(&power_regs->hw_power_vdddctrl) &
+ POWER_VDDDCTRL_DISABLE_FET);
+ tmp |= !(readl(&power_regs->hw_power_vddactrl) &
+ POWER_VDDACTRL_DISABLE_FET);
+ tmp |= !(readl(&power_regs->hw_power_vddioctrl) &
+ POWER_VDDIOCTRL_DISABLE_FET);
+ if (tmp)
+ writel(POWER_CHARGE_ENABLE_LOAD,
+ &power_regs->hw_power_charge_clr);
+}
+
+void mx28_boot_valid_5v(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ /*
+ * Use VBUSVALID level instead of VDD5V_GT_VDDIO level to trigger a 5V
+ * disconnect event. FIXME
+ */
+ writel(POWER_5VCTRL_VBUSVALID_5VDETECT,
+ &power_regs->hw_power_5vctrl_set);
+
+ /* Configure polarity to check for 5V disconnection. */
+ writel(POWER_CTRL_POLARITY_VBUSVALID |
+ POWER_CTRL_POLARITY_VDD5V_GT_VDDIO,
+ &power_regs->hw_power_ctrl_clr);
+
+ writel(POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_VDD5V_GT_VDDIO_IRQ,
+ &power_regs->hw_power_ctrl_clr);
+
+ mx28_power_enable_4p2();
+}
+
+void mx28_powerdown(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ writel(POWER_RESET_UNLOCK_KEY, &power_regs->hw_power_reset);
+ writel(POWER_RESET_UNLOCK_KEY | POWER_RESET_PWD_OFF,
+ &power_regs->hw_power_reset);
+}
+
+void mx28_handle_5v_conflict(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t tmp;
+
+ setbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_BO_OFFSET_MASK);
+
+ for (;;) {
+ tmp = readl(&power_regs->hw_power_sts);
+
+ if (tmp & POWER_STS_VDDIO_BO) {
+ mx28_powerdown();
+ break;
+ }
+
+ if (tmp & POWER_STS_VDD5V_GT_VDDIO) {
+ mx28_boot_valid_5v();
+ break;
+ } else {
+ mx28_powerdown();
+ break;
+ }
+ }
+}
+
+int mx28_get_batt_volt(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t volt = readl(&power_regs->hw_power_battmonitor);
+ volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
+ volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
+ volt *= 8;
+ return volt;
+}
+
+int mx28_is_batt_ready(void)
+{
+ return (mx28_get_batt_volt() >= 3600);
+}
+
+void mx28_5v_boot(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ /*
+ * NOTE: In original IMX-Bootlets, this also checks for VBUSVALID,
+ * but their implementation always returns 1 so we omit it here.
+ */
+ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ mx28_boot_valid_5v();
+ return;
+ }
+
+ early_delay(1000);
+ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ mx28_boot_valid_5v();
+ return;
+ }
+
+ mx28_handle_5v_conflict();
+}
+
+void mx28_init_batt_bo(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ /* Brownout at 3V */
+ clrsetbits_le32(&power_regs->hw_power_battmonitor,
+ POWER_BATTMONITOR_BRWNOUT_LVL_MASK,
+ 15 << POWER_BATTMONITOR_BRWNOUT_LVL_OFFSET);
+
+ writel(POWER_CTRL_BATT_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+ writel(POWER_CTRL_ENIRQ_BATT_BO, &power_regs->hw_power_ctrl_clr);
+}
+
+void mx28_switch_vddd_to_dcdc_source(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ clrsetbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_LINREG_OFFSET_MASK,
+ POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW);
+
+ clrbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_DISABLE_FET | POWER_VDDDCTRL_ENABLE_LINREG |
+ POWER_VDDDCTRL_DISABLE_STEPPING);
+}
+
+int mx28_is_batt_good(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t volt;
+
+ volt = readl(&power_regs->hw_power_battmonitor);
+ volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
+ volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
+ volt *= 8;
+
+ if ((volt >= 2400) && (volt <= 4300))
+ return 1;
+
+ clrsetbits_le32(&power_regs->hw_power_5vctrl,
+ POWER_5VCTRL_CHARGE_4P2_ILIMIT_MASK,
+ 0x3 << POWER_5VCTRL_CHARGE_4P2_ILIMIT_OFFSET);
+ writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+ &power_regs->hw_power_5vctrl_clr);
+
+ clrsetbits_le32(&power_regs->hw_power_charge,
+ POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
+ POWER_CHARGE_STOP_ILIMIT_10MA | 0x3);
+
+ writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_clr);
+ writel(POWER_5VCTRL_PWD_CHARGE_4P2_MASK,
+ &power_regs->hw_power_5vctrl_clr);
+
+ early_delay(500000);
+
+ volt = readl(&power_regs->hw_power_battmonitor);
+ volt &= POWER_BATTMONITOR_BATT_VAL_MASK;
+ volt >>= POWER_BATTMONITOR_BATT_VAL_OFFSET;
+ volt *= 8;
+
+ if (volt >= 3500)
+ return 0;
+
+ if (volt >= 2400)
+ return 1;
+
+ writel(POWER_CHARGE_STOP_ILIMIT_MASK | POWER_CHARGE_BATTCHRG_I_MASK,
+ &power_regs->hw_power_charge_clr);
+ writel(POWER_CHARGE_PWD_BATTCHRG, &power_regs->hw_power_charge_set);
+
+ return 0;
+}
+
+void mx28_power_configure_power_source(void)
+{
+ mx28_src_power_init();
+
+ mx28_5v_boot();
+ mx28_power_clock2pll();
+
+ mx28_init_batt_bo();
+ mx28_switch_vddd_to_dcdc_source();
+}
+
+void mx28_enable_output_rail_protection(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
+ POWER_CTRL_VDDIO_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+
+ setbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_PWDN_BRNOUT);
+
+ setbits_le32(&power_regs->hw_power_vddactrl,
+ POWER_VDDACTRL_PWDN_BRNOUT);
+
+ setbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_PWDN_BRNOUT);
+}
+
+int mx28_get_vddio_power_source_off(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t tmp;
+
+ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ tmp = readl(&power_regs->hw_power_vddioctrl);
+ if (tmp & POWER_VDDIOCTRL_DISABLE_FET) {
+ if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
+ POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
+ return 1;
+ }
+ }
+
+ if (!(readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_ENABLE_DCDC)) {
+ if ((tmp & POWER_VDDIOCTRL_LINREG_OFFSET_MASK) ==
+ POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
+ return 1;
+ }
+ }
+ }
+
+ return 0;
+
+}
+
+int mx28_get_vddd_power_source_off(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t tmp;
+
+ tmp = readl(&power_regs->hw_power_vdddctrl);
+ if (tmp & POWER_VDDDCTRL_DISABLE_FET) {
+ if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
+ POWER_VDDDCTRL_LINREG_OFFSET_0STEPS) {
+ return 1;
+ }
+ }
+
+ if (readl(&power_regs->hw_power_sts) & POWER_STS_VDD5V_GT_VDDIO) {
+ if (!(readl(&power_regs->hw_power_5vctrl) &
+ POWER_5VCTRL_ENABLE_DCDC)) {
+ return 1;
+ }
+ }
+
+ if (!(tmp & POWER_VDDDCTRL_ENABLE_LINREG)) {
+ if ((tmp & POWER_VDDDCTRL_LINREG_OFFSET_MASK) ==
+ POWER_VDDDCTRL_LINREG_OFFSET_1STEPS_BELOW) {
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+void mx28_power_set_vddio(uint32_t new_target, uint32_t new_brownout)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t cur_target, diff, bo_int = 0;
+ uint32_t powered_by_linreg = 0;
+
+ new_brownout = new_target - new_brownout;
+
+ cur_target = readl(&power_regs->hw_power_vddioctrl);
+ cur_target &= POWER_VDDIOCTRL_TRG_MASK;
+ cur_target *= 50; /* 50 mV step*/
+ cur_target += 2800; /* 2800 mV lowest */
+
+ powered_by_linreg = mx28_get_vddio_power_source_off();
+ if (new_target > cur_target) {
+
+ if (powered_by_linreg) {
+ bo_int = readl(&power_regs->hw_power_vddioctrl);
+ clrbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_CTRL_ENIRQ_VDDIO_BO);
+ }
+
+ setbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_BO_OFFSET_MASK);
+ do {
+ if (new_target - cur_target > 100)
+ diff = cur_target + 100;
+ else
+ diff = new_target;
+
+ diff -= 2800;
+ diff /= 50;
+
+ clrsetbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_TRG_MASK, diff);
+
+ if (powered_by_linreg)
+ early_delay(1500);
+ else {
+ while (!(readl(&power_regs->hw_power_sts) &
+ POWER_STS_DC_OK))
+ ;
+
+ }
+
+ cur_target = readl(&power_regs->hw_power_vddioctrl);
+ cur_target &= POWER_VDDIOCTRL_TRG_MASK;
+ cur_target *= 50; /* 50 mV step*/
+ cur_target += 2800; /* 2800 mV lowest */
+ } while (new_target > cur_target);
+
+ if (powered_by_linreg) {
+ writel(POWER_CTRL_VDDIO_BO_IRQ,
+ &power_regs->hw_power_ctrl_clr);
+ if (bo_int & POWER_CTRL_ENIRQ_VDDIO_BO)
+ setbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_CTRL_ENIRQ_VDDIO_BO);
+ }
+ } else {
+ do {
+ if (cur_target - new_target > 100)
+ diff = cur_target - 100;
+ else
+ diff = new_target;
+
+ diff -= 2800;
+ diff /= 50;
+
+ clrsetbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDIOCTRL_TRG_MASK, diff);
+
+ if (powered_by_linreg)
+ early_delay(1500);
+ else {
+ while (!(readl(&power_regs->hw_power_sts) &
+ POWER_STS_DC_OK))
+ ;
+
+ }
+
+ cur_target = readl(&power_regs->hw_power_vddioctrl);
+ cur_target &= POWER_VDDIOCTRL_TRG_MASK;
+ cur_target *= 50; /* 50 mV step*/
+ cur_target += 2800; /* 2800 mV lowest */
+ } while (new_target < cur_target);
+ }
+
+ clrsetbits_le32(&power_regs->hw_power_vddioctrl,
+ POWER_VDDDCTRL_BO_OFFSET_MASK,
+ new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET);
+}
+
+void mx28_power_set_vddd(uint32_t new_target, uint32_t new_brownout)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+ uint32_t cur_target, diff, bo_int = 0;
+ uint32_t powered_by_linreg = 0;
+
+ new_brownout = new_target - new_brownout;
+
+ cur_target = readl(&power_regs->hw_power_vdddctrl);
+ cur_target &= POWER_VDDDCTRL_TRG_MASK;
+ cur_target *= 25; /* 25 mV step*/
+ cur_target += 800; /* 800 mV lowest */
+
+ powered_by_linreg = mx28_get_vddd_power_source_off();
+ if (new_target > cur_target) {
+ if (powered_by_linreg) {
+ bo_int = readl(&power_regs->hw_power_vdddctrl);
+ clrbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_CTRL_ENIRQ_VDDD_BO);
+ }
+
+ setbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_BO_OFFSET_MASK);
+
+ do {
+ if (new_target - cur_target > 100)
+ diff = cur_target + 100;
+ else
+ diff = new_target;
+
+ diff -= 800;
+ diff /= 25;
+
+ clrsetbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_TRG_MASK, diff);
+
+ if (powered_by_linreg)
+ early_delay(1500);
+ else {
+ while (!(readl(&power_regs->hw_power_sts) &
+ POWER_STS_DC_OK))
+ ;
+
+ }
+
+ cur_target = readl(&power_regs->hw_power_vdddctrl);
+ cur_target &= POWER_VDDDCTRL_TRG_MASK;
+ cur_target *= 25; /* 25 mV step*/
+ cur_target += 800; /* 800 mV lowest */
+ } while (new_target > cur_target);
+
+ if (powered_by_linreg) {
+ writel(POWER_CTRL_VDDD_BO_IRQ,
+ &power_regs->hw_power_ctrl_clr);
+ if (bo_int & POWER_CTRL_ENIRQ_VDDD_BO)
+ setbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_CTRL_ENIRQ_VDDD_BO);
+ }
+ } else {
+ do {
+ if (cur_target - new_target > 100)
+ diff = cur_target - 100;
+ else
+ diff = new_target;
+
+ diff -= 800;
+ diff /= 25;
+
+ clrsetbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_TRG_MASK, diff);
+
+ if (powered_by_linreg)
+ early_delay(1500);
+ else {
+ while (!(readl(&power_regs->hw_power_sts) &
+ POWER_STS_DC_OK))
+ ;
+
+ }
+
+ cur_target = readl(&power_regs->hw_power_vdddctrl);
+ cur_target &= POWER_VDDDCTRL_TRG_MASK;
+ cur_target *= 25; /* 25 mV step*/
+ cur_target += 800; /* 800 mV lowest */
+ } while (new_target < cur_target);
+ }
+
+ clrsetbits_le32(&power_regs->hw_power_vdddctrl,
+ POWER_VDDDCTRL_BO_OFFSET_MASK,
+ new_brownout << POWER_VDDDCTRL_BO_OFFSET_OFFSET);
+}
+
+void mx28_power_init(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ mx28_power_clock2xtal();
+ mx28_power_clear_auto_restart();
+ mx28_power_set_linreg();
+ mx28_power_setup_5v_detect();
+ mx28_power_configure_power_source();
+ mx28_enable_output_rail_protection();
+
+ mx28_power_set_vddio(3300, 3150);
+
+ mx28_power_set_vddd(1350, 1200);
+
+ writel(POWER_CTRL_VDDD_BO_IRQ | POWER_CTRL_VDDA_BO_IRQ |
+ POWER_CTRL_VDDIO_BO_IRQ | POWER_CTRL_VDD5V_DROOP_IRQ |
+ POWER_CTRL_VBUS_VALID_IRQ | POWER_CTRL_BATT_BO_IRQ |
+ POWER_CTRL_DCDC4P2_BO_IRQ, &power_regs->hw_power_ctrl_clr);
+
+ writel(POWER_5VCTRL_PWDN_5VBRNOUT, &power_regs->hw_power_5vctrl_set);
+
+ early_delay(1000);
+}
+
+#ifdef CONFIG_SPL_MX28_PSWITCH_WAIT
+void mx28_power_wait_pswitch(void)
+{
+ struct mx28_power_regs *power_regs =
+ (struct mx28_power_regs *)MXS_POWER_BASE;
+
+ while (!(readl(&power_regs->hw_power_sts) & POWER_STS_PSWITCH_MASK))
+ ;
+}
+#endif
diff --git a/board/denx/m28evk/start.S b/board/denx/m28evk/start.S
new file mode 100644
index 0000000..94696d6
--- /dev/null
+++ b/board/denx/m28evk/start.S
@@ -0,0 +1,234 @@
+/*
+ * armboot - Startup Code for ARM926EJS CPU-core
+ *
+ * Copyright (c) 2003 Texas Instruments
+ *
+ * ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
+ *
+ * Copyright (c) 2001 Marius Groger <mag@sysgo.de>
+ * Copyright (c) 2002 Alex Zupke <azu@sysgo.de>
+ * Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
+ * Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
+ * Copyright (c) 2003 Kshitij <kshitij@ti.com>
+ * Copyright (c) 2010 Albert Aribaud <albert.u.boot@aribaud.net>
+ *
+ * Change to support call back into iMX28 bootrom
+ * Copyright (c) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <common.h>
+#include <version.h>
+
+#if defined(CONFIG_OMAP1610)
+#include <./configs/omap1510.h>
+#elif defined(CONFIG_OMAP730)
+#include <./configs/omap730.h>
+#endif
+
+/*
+ *************************************************************************
+ *
+ * Jump vector table as in table 3.1 in [1]
+ *
+ *************************************************************************
+ */
+
+
+.globl _start
+_start:
+ b reset
+ b undefined_instruction
+ b software_interrupt
+ b prefetch_abort
+ b data_abort
+ b not_used
+ b irq
+ b fiq
+
+/*
+ * Vector table, located at address 0x20.
+ * This table allows the code running AFTER SPL, the U-Boot, to install it's
+ * interrupt handlers here. The problem is that the U-Boot is loaded into RAM,
+ * including it's interrupt vectoring table and the table at 0x0 is still the
+ * SPLs. So if interrupt happens in U-Boot, the SPLs interrupt vectoring table
+ * is still used.
+ */
+_vt_reset:
+ .word _reset
+_vt_undefined_instruction:
+ .word _hang
+_vt_software_interrupt:
+ .word _hang
+_vt_prefetch_abort:
+ .word _hang
+_vt_data_abort:
+ .word _hang
+_vt_not_used:
+ .word _reset
+_vt_irq:
+ .word _hang
+_vt_fiq:
+ .word _hang
+
+reset:
+ ldr pc, _vt_reset
+undefined_instruction:
+ ldr pc, _vt_undefined_instruction
+software_interrupt:
+ ldr pc, _vt_software_interrupt
+prefetch_abort:
+ ldr pc, _vt_prefetch_abort
+data_abort:
+ ldr pc, _vt_data_abort
+not_used:
+ ldr pc, _vt_not_used
+irq:
+ ldr pc, _vt_irq
+fiq:
+ ldr pc, _vt_fiq
+
+ .balignl 16,0xdeadbeef
+
+/*
+ *************************************************************************
+ *
+ * Startup Code (reset vector)
+ *
+ * do important init only if we don't start from memory!
+ * setup Memory and board specific bits prior to relocation.
+ * relocate armboot to ram
+ * setup stack
+ *
+ *************************************************************************
+ */
+
+.globl _TEXT_BASE
+_TEXT_BASE:
+ .word CONFIG_SYS_TEXT_BASE
+
+/*
+ * These are defined in the board-specific linker script.
+ * Subtracting _start from them lets the linker put their
+ * relative position in the executable instead of leaving
+ * them null.
+ */
+.globl _bss_start_ofs
+_bss_start_ofs:
+ .word __bss_start - _start
+
+.globl _bss_end_ofs
+_bss_end_ofs:
+ .word __bss_end__ - _start
+
+.globl _end_ofs
+_end_ofs:
+ .word _end - _start
+
+#ifdef CONFIG_USE_IRQ
+/* IRQ stack memory (calculated at run-time) */
+.globl IRQ_STACK_START
+IRQ_STACK_START:
+ .word 0x0badc0de
+
+/* IRQ stack memory (calculated at run-time) */
+.globl FIQ_STACK_START
+FIQ_STACK_START:
+ .word 0x0badc0de
+#endif
+
+/* IRQ stack memory (calculated at run-time) + 8 bytes */
+.globl IRQ_STACK_START_IN
+IRQ_STACK_START_IN:
+ .word 0x0badc0de
+
+/*
+ * the actual reset code
+ */
+
+_reset:
+ /*
+ * Store all registers on old stack pointer, this will allow us later to
+ * return to the BootROM and let the BootROM load U-Boot into RAM.
+ */
+ push {r0-r12,r14}
+
+ /*
+ * set the cpu to SVC32 mode
+ */
+ mrs r0,cpsr
+ bic r0,r0,#0x1f
+ orr r0,r0,#0xd3
+ msr cpsr,r0
+
+ /*
+ * we do sys-critical inits only at reboot,
+ * not when booting from ram!
+ */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+ bl cpu_init_crit
+#endif
+
+ bl board_init_ll
+
+ pop {r0-r12,r14}
+ bx lr
+
+/*
+ *************************************************************************
+ *
+ * CPU_init_critical registers
+ *
+ * setup important registers
+ * setup memory timing
+ *
+ *************************************************************************
+ */
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+cpu_init_crit:
+ /*
+ * flush v4 I/D caches
+ */
+ mov r0, #0
+ mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
+ mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
+
+ /*
+ * disable MMU stuff and caches
+ */
+ mrc p15, 0, r0, c1, c0, 0
+ bic r0, r0, #0x00002300 /* clear bits 13, 9:8 (--V- --RS) */
+ bic r0, r0, #0x00000087 /* clear bits 7, 2:0 (B--- -CAM) */
+ orr r0, r0, #0x00000002 /* set bit 2 (A) Align */
+ orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */
+ mcr p15, 0, r0, c1, c0, 0
+
+ mov pc, lr /* back to my caller */
+
+ .align 5
+#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
+
+_hang:
+ ldr sp, _TEXT_BASE /* switch to abort stack */
+1:
+ bl 1b /* hang and never return */
diff --git a/board/denx/m28evk/u-boot-spl.lds b/board/denx/m28evk/u-boot-spl.lds
new file mode 100644
index 0000000..e296a92
--- /dev/null
+++ b/board/denx/m28evk/u-boot-spl.lds
@@ -0,0 +1,87 @@
+/*
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * January 2004 - Changed to support H4 device
+ * Copyright (c) 2004-2008 Texas Instruments
+ *
+ * (C) Copyright 2002
+ * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ board/denx/m28evk/start.o (.text)
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+ . = ALIGN(4);
+ .data : {
+ *(.data)
+ }
+
+ . = ALIGN(4);
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ . = ALIGN(4);
+
+ .rel.dyn : {
+ __rel_dyn_start = .;
+ *(.rel*)
+ __rel_dyn_end = .;
+ }
+
+ .dynsym : {
+ __dynsym_start = .;
+ *(.dynsym)
+ }
+
+ _end = .;
+
+ .bss __rel_dyn_start (OVERLAY) : {
+ __bss_start = .;
+ *(.bss)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ }
+
+ /DISCARD/ : { *(.bss*) }
+ /DISCARD/ : { *(.dynstr*) }
+ /DISCARD/ : { *(.dynsym*) }
+ /DISCARD/ : { *(.dynamic*) }
+ /DISCARD/ : { *(.hash*) }
+ /DISCARD/ : { *(.plt*) }
+ /DISCARD/ : { *(.interp*) }
+ /DISCARD/ : { *(.gnu*) }
+}
diff --git a/board/denx/m28evk/u-boot.bd b/board/denx/m28evk/u-boot.bd
new file mode 100644
index 0000000..3ce7f92
--- /dev/null
+++ b/board/denx/m28evk/u-boot.bd
@@ -0,0 +1,14 @@
+sources {
+ u_boot_spl="spl/u-boot-spl.bin";
+ u_boot="u-boot.bin";
+}
+
+section (0) {
+ load u_boot_spl > 0x0000;
+ load ivt (entry = 0x0014) > 0x8000;
+ hab call 0x8000;
+
+ load u_boot > 0x40000100;
+ load ivt (entry = 0x40000100) > 0x8000;
+ hab call 0x8000;
+}
diff --git a/board/innokom/flash.c b/board/innokom/flash.c
deleted file mode 100644
index ed4b987..0000000
--- a/board/innokom/flash.c
+++ /dev/null
@@ -1,421 +0,0 @@
-/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Robert Schwebel, Pengutronix, <r.schwebel@pengutronix.de>
- *
- * (C) Copyright 2002
- * Auerswald GmbH & Co KG, Germany
- * Kai-Uwe Bloem <kai-uwe.bloem@auerswald.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/pxa-regs.h>
-
-/* Debugging macros ------------------------------------------------------ */
-
-#undef FLASH_DEBUG
-
-/* Some debug macros */
-#if (FLASH_DEBUG > 2 )
-#define PRINTK3(args...) printf(args)
-#else
-#define PRINTK3(args...)
-#endif
-
-#if FLASH_DEBUG > 1
-#define PRINTK2(args...) printf(args)
-#else
-#define PRINTK2(args...)
-#endif
-
-#ifdef FLASH_DEBUG
-#define PRINTK(args...) printf(args)
-#else
-#define PRINTK(args...)
-#endif
-
-/* ------------------------------------------------------------------------ */
-
-/* Development system: we have only 16 MB Flash */
-#ifdef CONFIG_MTD_INNOKOM_16MB
-#define FLASH_BANK_SIZE 0x01000000 /* 16 MB (during development) */
-#define MAIN_SECT_SIZE 0x00020000 /* 128k per sector */
-#endif
-
-/* Production system: we have 64 MB Flash */
-#ifdef CONFIG_MTD_INNOKOM_64MB
-#define FLASH_BANK_SIZE 0x04000000 /* 64 MB */
-#define MAIN_SECT_SIZE 0x00020000 /* 128k per sector */
-#endif
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/**
- * flash_init: - initialize data structures for flash chips
- *
- * @return: size of the flash
- */
-
-ulong flash_init(void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
- flash_info[i].flash_id =
- (INTEL_MANUFACT & FLASH_VENDMASK) |
- (INTEL_ID_28F128J3 & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-
- switch (i) {
- case 0:
- flashbase = PHYS_FLASH_1;
- break;
- default:
- panic("configured too many flash banks!\n");
- break;
- }
- for (j = 0; j < flash_info[i].sector_count; j++) {
- flash_info[i].start[j] = flashbase + j*MAIN_SECT_SIZE;
- }
- size += flash_info[i].size;
- }
-
- /* Protect u-boot sectors */
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + (256*1024) - 1,
- &flash_info[0]);
-
-#ifdef CONFIG_ENV_IS_IN_FLASH
- flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- &flash_info[0]);
-#endif
-
- return size;
-}
-
-
-/**
- * flash_print_info: - print information about the flash situation
- *
- * @param info:
- */
-
-void flash_print_info (flash_info_t *info)
-{
- int i, j;
-
- for (j=0; j<CONFIG_SYS_MAX_FLASH_BANKS; j++) {
-
- switch (info->flash_id & FLASH_VENDMASK) {
-
- case (INTEL_MANUFACT & FLASH_VENDMASK):
- printf("Intel: ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
-
- case (INTEL_ID_28F128J3 & FLASH_TYPEMASK):
- printf("28F128J3 (128Mbit)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- return;
- }
-
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 5) == 0) printf ("\n ");
-
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
- info++;
- }
-}
-
-
-/**
- * flash_erase: - erase flash sectors
- *
- */
-
-int flash_erase(flash_info_t *info, int s_first, int s_last)
-{
- int flag, prot, sect;
- int rc = ERR_OK;
- ulong start;
-
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
-
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) != (INTEL_MANUFACT & FLASH_VENDMASK))
- return ERR_UNKNOWN_FLASH_VENDOR;
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) prot++;
- }
-
- if (prot) return ERR_PROTECTED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-
- flag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
-
- printf("Erasing sector %2d ... ", sect);
-
- PRINTK("\n");
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- if (info->protect[sect] == 0) { /* not protected */
- u16 * volatile addr = (u16 * volatile)(info->start[sect]);
-
- PRINTK("unlocking sector\n");
- *addr = 0x0060;
- *addr = 0x00d0;
- *addr = 0x00ff;
-
- PRINTK("erasing sector\n");
- *addr = 0x0020;
- PRINTK("confirming erase\n");
- *addr = 0x00D0;
-
- while ((*addr & 0x0080) != 0x0080) {
- PRINTK(".");
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- *addr = 0x00B0; /* suspend erase*/
- *addr = 0x00FF; /* read mode */
- rc = ERR_TIMOUT;
- goto outahere;
- }
- }
-
- PRINTK("clearing status register\n");
- *addr = 0x0050;
- PRINTK("resetting to read mode");
- *addr = 0x00FF;
- }
-
- printf("ok.\n");
- }
-
- if (ctrlc()) printf("User Interrupt!\n");
-
- outahere:
-
- /* allow flash to settle - wait 10 ms */
- udelay_masked(10000);
-
- if (flag) enable_interrupts();
-
- return rc;
-}
-
-
-/**
- * write_word: - copy memory to flash
- *
- * @param info:
- * @param dest:
- * @param data:
- * @return:
- */
-
-static int write_word (flash_info_t *info, ulong dest, ushort data)
-{
- volatile u16 *addr = (u16 *)dest, val;
- int rc = ERR_OK;
- int flag;
- ulong start;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*addr & data) != data) return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- flag = disable_interrupts();
-
- /* clear status register command */
- *addr = 0x50;
-
- /* program set-up command */
- *addr = 0x40;
-
- /* latch address/data */
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait while polling the status register */
- while(((val = *addr) & 0x80) != 0x80) {
- if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- rc = ERR_TIMOUT;
- *addr = 0xB0; /* suspend program command */
- goto outahere;
- }
- }
-
- if(val & 0x1A) { /* check for error */
- printf("\nFlash write error %02x at address %08lx\n",
- (int)val, (unsigned long)dest);
- if(val & (1<<3)) {
- printf("Voltage range error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if(val & (1<<1)) {
- printf("Device protect error.\n");
- rc = ERR_PROTECTED;
- goto outahere;
- }
- if(val & (1<<4)) {
- printf("Programming error.\n");
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
-
- outahere:
-
- *addr = 0xFF; /* read array command */
- if (flag) enable_interrupts();
-
- return rc;
-}
-
-
-/**
- * write_buf: - Copy memory to flash.
- *
- * @param info:
- * @param src: source of copy transaction
- * @param addr: where to copy to
- * @param cnt: number of bytes to copy
- *
- * @return error code
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp;
- ushort data;
- int l;
- int i, rc;
-
- wp = (addr & ~1); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
- }
- for (; i<2 && cnt>0; ++i) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 2;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 2) {
- /* data = *((vushort*)src); */
- data = *((ushort*)src);
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- src += 2;
- wp += 2;
- cnt -= 2;
- }
-
- if (cnt == 0) return ERR_OK;
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<2 && cnt>0; ++i, ++cp) {
- data = (data >> 8) | (*src++ << 8);
- --cnt;
- }
- for (; i<2; ++i, ++cp) {
- data = (data >> 8) | (*(uchar *)cp << 8);
- }
-
- return write_word(info, wp, data);
-}
diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c
deleted file mode 100644
index 22de7e3..0000000
--- a/board/innokom/innokom.c
+++ /dev/null
@@ -1,190 +0,0 @@
-/*
- * (C) Copyright 2002
- * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de
- * Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net
- * Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/mach-types.h>
-#include <asm/io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifdef CONFIG_SHOW_BOOT_PROGRESS
-# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
-#else
-# define SHOW_BOOT_PROGRESS(arg)
-#endif
-
-/**
- * i2c_init_board - reset i2c bus. When the board is powercycled during a
- * bus transfer it might hang; for details see doc/I2C_Edge_Conditions.
- * The Innokom board has GPIO70 connected to SCLK which can be toggled
- * until all chips think that their current cycles are finished.
- */
-int i2c_init_board(void)
-{
- int i;
-
- /* set gpio pin low _before_ we change direction to output */
- writel(GPIO_bit(70), GPCR(70));
-
- /* now toggle between output=low and high-impedance */
- for (i = 0; i < 20; i++) {
- writel(readl(GPDR(70)) | GPIO_bit(70), GPDR(70)); /* output */
- udelay(10);
- writel(readl(GPDR(70)) & ~GPIO_bit(70), GPDR(70)); /* input */
- udelay(10);
- }
-
- return 0;
-}
-
-
-/**
- * misc_init_r: - misc initialisation routines
- */
-
-int misc_init_r(void)
-{
- char *str;
-
- /* determine if the software update key is pressed during startup */
- if (readl(GPLR0) & 0x00000800) {
- printf("using bootcmd_normal (sw-update button not pressed)\n");
- str = getenv("bootcmd_normal");
- } else {
- printf("using bootcmd_update (sw-update button pressed)\n");
- str = getenv("bootcmd_update");
- }
-
- setenv("bootcmd",str);
-
- return 0;
-}
-
-
-/**
- * board_init: - setup some data structures
- *
- * @return: 0 in case of success
- */
-
-int board_init (void)
-{
- /* We have RAM, disable cache */
- dcache_disable();
- icache_disable();
-
- gd->bd->bi_arch_number = MACH_TYPE_INNOKOM;
- gd->bd->bi_boot_params = 0xa0000100;
- gd->bd->bi_baudrate = CONFIG_BAUDRATE;
-
- return 0;
-}
-
-extern void pxa_dram_init(void);
-int dram_init(void)
-{
- pxa_dram_init();
- gd->ram_size = PHYS_SDRAM_1_SIZE;
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-/**
- * innokom_set_led: - switch LEDs on or off
- *
- * @param led: LED to switch (0,1,2)
- * @param state: switch on (1) or off (0)
- */
-
-void innokom_set_led(int led, int state)
-{
- switch(led) {
-/*
- case 0: if (state==1) {
- GPCR0 |= CSB226_USER_LED0;
- } else if (state==0) {
- GPSR0 |= CSB226_USER_LED0;
- }
- break;
-
- case 1: if (state==1) {
- GPCR0 |= CSB226_USER_LED1;
- } else if (state==0) {
- GPSR0 |= CSB226_USER_LED1;
- }
- break;
-
- case 2: if (state==1) {
- GPCR0 |= CSB226_USER_LED2;
- } else if (state==0) {
- GPSR0 |= CSB226_USER_LED2;
- }
- break;
-*/
- }
-
- return;
-}
-
-
-/**
- * show_boot_progress: - indicate state of the boot process
- *
- * @param status: Status number - see README for details.
- *
- * The CSB226 does only have 3 LEDs, so we switch them on at the most
- * important states (1, 5, 15).
- */
-
-void show_boot_progress (int status)
-{
- switch(status) {
-/*
- case 1: csb226_set_led(0,1); break;
- case 5: csb226_set_led(1,1); break;
- case 15: csb226_set_led(2,1); break;
-*/
- }
-
- return;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_SMC91111
- rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c
index e63625b..9f259c2 100644
--- a/board/mpl/vcma9/vcma9.c
+++ b/board/mpl/vcma9/vcma9.c
@@ -72,9 +72,6 @@ int board_early_init_f(void)
int board_init(void)
{
- /* arch number of VCMA9-Board */
- gd->bd->bi_arch_number = MACH_TYPE_MPL_VCMA9;
-
/* adress of boot parameters */
gd->bd->bi_boot_params = 0x30000100;
diff --git a/board/ronetix/pm9261/pm9261.c b/board/ronetix/pm9261/pm9261.c
index 871b94a..b26e33a 100644
--- a/board/ronetix/pm9261/pm9261.c
+++ b/board/ronetix/pm9261/pm9261.c
@@ -248,9 +248,6 @@ int board_init(void)
1 << ATMEL_ID_PIOC,
&pmc->pcer);
- /* arch number of PM9261-Board */
- gd->bd->bi_arch_number = MACH_TYPE_PM9261;
-
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
diff --git a/board/ronetix/pm9263/pm9263.c b/board/ronetix/pm9263/pm9263.c
index cfc9847..b0f7ea6 100644
--- a/board/ronetix/pm9263/pm9263.c
+++ b/board/ronetix/pm9263/pm9263.c
@@ -349,9 +349,6 @@ int board_init(void)
(1 << ATMEL_ID_PIOB),
&pmc->pcer);
- /* arch number of AT91SAM9263EK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_PM9263;
-
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
diff --git a/board/ronetix/pm9g45/pm9g45.c b/board/ronetix/pm9g45/pm9g45.c
index f3374a4..961d193 100644
--- a/board/ronetix/pm9g45/pm9g45.c
+++ b/board/ronetix/pm9g45/pm9g45.c
@@ -139,8 +139,6 @@ int board_init(void)
(1 << ATMEL_ID_PIOC) |
(1 << ATMEL_ID_PIODE), &pmc->pcer);
- /* arch number of AT91SAM9M10G45EK-Board */
- gd->bd->bi_arch_number = MACH_TYPE_PM9G45;
/* adress of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
diff --git a/board/syteco/zmx25/zmx25.c b/board/syteco/zmx25/zmx25.c
index a89ee1a..c56b195 100644
--- a/board/syteco/zmx25/zmx25.c
+++ b/board/syteco/zmx25/zmx25.c
@@ -128,7 +128,6 @@ int board_late_init(void)
#ifdef CONFIG_FEC_MXC
struct iomuxc_mux_ctl *muxctl;
- struct iomuxc_pad_ctl *padctl;
u32 gpio_mux_mode2 = MX25_PIN_MUX_MODE(2);
u32 gpio_mux_mode5 = MX25_PIN_MUX_MODE(5);
@@ -144,7 +143,6 @@ int board_late_init(void)
* FEC_RX_ERR: FEC_RX_ERR is ALT 2 mode of pin R2
*/
muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
- padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
writel(gpio_mux_mode5, &muxctl->pad_upll_bypclk);
writel(gpio_mux_mode2, &muxctl->pad_uart2_cts);
diff --git a/board/innokom/Makefile b/board/ti/omap5_evm/Makefile
index 8b58b7f..fa81d64 100644
--- a/board/innokom/Makefile
+++ b/board/ti/omap5_evm/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000-2006
+# (C) Copyright 2000, 2001, 2002
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -12,7 +12,7 @@
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS := innokom.o flash.o
+COBJS := evm.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
@@ -33,6 +33,12 @@ OBJS := $(addprefix $(obj),$(COBJS))
$(LIB): $(obj).depend $(OBJS)
$(call cmd_link_o_target, $(OBJS))
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
#########################################################################
# defines $(obj).depend target
diff --git a/board/ti/omap5_evm/evm.c b/board/ti/omap5_evm/evm.c
new file mode 100644
index 0000000..ea0cb13
--- /dev/null
+++ b/board/ti/omap5_evm/evm.c
@@ -0,0 +1,101 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated, <www.ti.com>
+ * Aneesh V <aneesh@ti.com>
+ * Steve Sakoman <steve@sakoman.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <twl6030.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+
+#include "mux_data.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const struct omap_sysinfo sysinfo = {
+ "Board: OMAP5430 EVM\n"
+};
+
+/**
+ * @brief board_init
+ *
+ * @return 0
+ */
+int board_init(void)
+{
+ gpmc_init();
+ gd->bd->bi_arch_number = MACH_TYPE_OMAP5_SEVM;
+ gd->bd->bi_boot_params = (0x80000000 + 0x100); /* boot param addr */
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ return 0;
+}
+
+/**
+ * @brief misc_init_r - Configure EVM board specific configurations
+ * such as power configurations, ethernet initialization as phase2 of
+ * boot sequence
+ *
+ * @return 0
+ */
+int misc_init_r(void)
+{
+#ifdef CONFIG_TWL6030_POWER
+ twl6030_init_battery_charging();
+#endif
+ return 0;
+}
+
+void set_muxconf_regs_essential(void)
+{
+ do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+ sizeof(core_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+
+ do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+ sizeof(wkup_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+}
+
+void set_muxconf_regs_non_essential(void)
+{
+ do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ sizeof(core_padconf_array_non_essential) /
+ sizeof(struct pad_conf_entry));
+
+ do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ sizeof(wkup_padconf_array_non_essential) /
+ sizeof(struct pad_conf_entry));
+}
+
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
+int board_mmc_init(bd_t *bis)
+{
+ omap_mmc_init(0);
+ omap_mmc_init(1);
+ return 0;
+}
+#endif
diff --git a/board/ti/omap5_evm/mux_data.h b/board/ti/omap5_evm/mux_data.h
new file mode 100644
index 0000000..18f4729
--- /dev/null
+++ b/board/ti/omap5_evm/mux_data.h
@@ -0,0 +1,275 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * Balaji Krishnamoorthy <balajitk@ti.com>
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _EVM5430_MUX_DATA_H
+#define _EVM5430_MUX_DATA_H
+
+#include <asm/arch/mux_omap5.h>
+
+const struct pad_conf_entry core_padconf_array_essential[] = {
+
+{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
+{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
+{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
+{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
+{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
+{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
+{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
+{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
+{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
+{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
+{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
+{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
+{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
+{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
+{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
+{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
+{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
+{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
+{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
+{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
+{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
+{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
+{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
+{UART3_TX_IRTX, (M0)} /* uart3_tx */
+
+};
+
+const struct pad_conf_entry wkup_padconf_array_essential[] = {
+
+{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
+{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
+{PAD1_SYS_32K, (IEN | M0)} /* sys_32k */
+
+};
+
+const struct pad_conf_entry core_padconf_array_non_essential[] = {
+ {GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */
+ {GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */
+ {GPMC_AD10, (PTU | IEN | M3)}, /* gpio_34 */
+ {GPMC_AD11, (PTU | IEN | M3)}, /* gpio_35 */
+ {GPMC_AD12, (PTU | IEN | M3)}, /* gpio_36 */
+ {GPMC_AD13, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_37 */
+ {GPMC_AD14, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_38 */
+ {GPMC_AD15, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_39 */
+ {GPMC_A16, (M3)}, /* gpio_40 */
+ {GPMC_A17, (PTD | M3)}, /* gpio_41 */
+ {GPMC_A18, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row6 */
+ {GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */
+ {GPMC_A20, (IEN | M3)}, /* gpio_44 */
+ {GPMC_A21, (M3)}, /* gpio_45 */
+ {GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col6 */
+ {GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */
+ {GPMC_A24, (PTD | M3)}, /* gpio_48 */
+ {GPMC_A25, (PTD | M3)}, /* gpio_49 */
+ {GPMC_NCS0, (M3)}, /* gpio_50 */
+ {GPMC_NCS1, (IEN | M3)}, /* gpio_51 */
+ {GPMC_NCS2, (IEN | M3)}, /* gpio_52 */
+ {GPMC_NCS3, (IEN | M3)}, /* gpio_53 */
+ {GPMC_NWP, (M3)}, /* gpio_54 */
+ {GPMC_CLK, (PTD | M3)}, /* gpio_55 */
+ {GPMC_NADV_ALE, (M3)}, /* gpio_56 */
+ {GPMC_NBE0_CLE, (M3)}, /* gpio_59 */
+ {GPMC_NBE1, (PTD | M3)}, /* gpio_60 */
+ {GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */
+ {GPMC_WAIT1, (IEN | M3)}, /* gpio_62 */
+ {C2C_DATA11, (PTD | M3)}, /* gpio_100 */
+ {C2C_DATA12, (M1)}, /* dsi1_te0 */
+ {C2C_DATA13, (PTD | M3)}, /* gpio_102 */
+ {C2C_DATA14, (M1)}, /* dsi2_te0 */
+ {C2C_DATA15, (PTD | M3)}, /* gpio_104 */
+ {HDMI_HPD, (M0)}, /* hdmi_hpd */
+ {HDMI_CEC, (M0)}, /* hdmi_cec */
+ {HDMI_DDC_SCL, (PTU | M0)}, /* hdmi_ddc_scl */
+ {HDMI_DDC_SDA, (PTU | IEN | M0)}, /* hdmi_ddc_sda */
+ {CSI21_DX0, (IEN | M0)}, /* csi21_dx0 */
+ {CSI21_DY0, (IEN | M0)}, /* csi21_dy0 */
+ {CSI21_DX1, (IEN | M0)}, /* csi21_dx1 */
+ {CSI21_DY1, (IEN | M0)}, /* csi21_dy1 */
+ {CSI21_DX2, (IEN | M0)}, /* csi21_dx2 */
+ {CSI21_DY2, (IEN | M0)}, /* csi21_dy2 */
+ {CSI21_DX3, (PTD | M7)}, /* csi21_dx3 */
+ {CSI21_DY3, (PTD | M7)}, /* csi21_dy3 */
+ {CSI21_DX4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dx4 */
+ {CSI21_DY4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dy4 */
+ {CSI22_DX0, (IEN | M0)}, /* csi22_dx0 */
+ {CSI22_DY0, (IEN | M0)}, /* csi22_dy0 */
+ {CSI22_DX1, (IEN | M0)}, /* csi22_dx1 */
+ {CSI22_DY1, (IEN | M0)}, /* csi22_dy1 */
+ {CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */
+ {CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */
+ {CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */
+ {USBB1_ULPITLL_CLK, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cawake */
+ {USBB1_ULPITLL_STP, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cadata */
+ {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caflag */
+ {USBB1_ULPITLL_NXT, (OFF_EN | M1)}, /* hsi1_acready */
+ {USBB1_ULPITLL_DAT0, (OFF_EN | M1)}, /* hsi1_acwake */
+ {USBB1_ULPITLL_DAT1, (OFF_EN | M1)}, /* hsi1_acdata */
+ {USBB1_ULPITLL_DAT2, (OFF_EN | M1)}, /* hsi1_acflag */
+ {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caready */
+ {USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */
+ {USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */
+ {USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */
+ {USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */
+ {USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */
+ {USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */
+ {USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */
+ {USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */
+ {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */
+ {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */
+ {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */
+ {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */
+ {ABE_MCBSP1_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_clkx */
+ {ABE_MCBSP1_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dr */
+ {ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dx */
+ {ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_fsx */
+ {ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */
+ {ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_dl_data */
+ {ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_frame */
+ {ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_lb_clk */
+ {ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_clks */
+ {ABE_DMIC_CLK1, (M0)}, /* abe_dmic_clk1 */
+ {ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */
+ {ABE_DMIC_DIN2, (IEN | M0)}, /* abe_dmic_din2 */
+ {ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */
+ {UART2_CTS, (PTU | IEN | M0)}, /* uart2_cts */
+ {UART2_RTS, (M0)}, /* uart2_rts */
+ {UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */
+ {UART2_TX, (M0)}, /* uart2_tx */
+ {HDQ_SIO, (M3)}, /* gpio_127 */
+ {MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */
+ {MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */
+ {MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */
+ {MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs0 */
+ {MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* mcspi1_cs1 */
+ {MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_139 */
+ {MCSPI1_CS3, (PTU | IEN | M3)}, /* gpio_140 */
+ {SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc5_clk */
+ {SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */
+ {SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */
+ {SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat1 */
+ {SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat2 */
+ {SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat3 */
+ {MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_clk */
+ {MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_simo */
+ {MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_somi */
+ {MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */
+ {UART4_RX, (IEN | M0)}, /* uart4_rx */
+ {UART4_TX, (M0)}, /* uart4_tx */
+ {USBB2_ULPITLL_CLK, (PTD | IEN | M3)}, /* gpio_157 */
+ {USBB2_ULPITLL_STP, (IEN | M5)}, /* dispc2_data23 */
+ {USBB2_ULPITLL_DIR, (IEN | M5)}, /* dispc2_data22 */
+ {USBB2_ULPITLL_NXT, (IEN | M5)}, /* dispc2_data21 */
+ {USBB2_ULPITLL_DAT0, (IEN | M5)}, /* dispc2_data20 */
+ {USBB2_ULPITLL_DAT1, (IEN | M5)}, /* dispc2_data19 */
+ {USBB2_ULPITLL_DAT2, (IEN | M5)}, /* dispc2_data18 */
+ {USBB2_ULPITLL_DAT3, (IEN | M5)}, /* dispc2_data15 */
+ {USBB2_ULPITLL_DAT4, (IEN | M5)}, /* dispc2_data14 */
+ {USBB2_ULPITLL_DAT5, (IEN | M5)}, /* dispc2_data13 */
+ {USBB2_ULPITLL_DAT6, (IEN | M5)}, /* dispc2_data12 */
+ {USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */
+ {USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */
+ {USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */
+ {UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col0 */
+ {UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */
+ {UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */
+ {UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */
+ {UNIPRO_TX2, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col4 */
+ {UNIPRO_TY2, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col5 */
+ {UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */
+ {UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */
+ {UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */
+ {UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row3 */
+ {UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row4 */
+ {UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row5 */
+ {USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */
+ {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */
+ {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */
+ {FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */
+ {FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */
+ {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */
+ {SYS_NIRQ2, (M7)}, /* sys_nirq2 */
+ {SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */
+ {SYS_BOOT1, (M3)}, /* gpio_185 */
+ {SYS_BOOT2, (PTD | IEN | M3)}, /* gpio_186 */
+ {SYS_BOOT3, (PTD | IEN | M3)}, /* gpio_187 */
+ {SYS_BOOT4, (M3)}, /* gpio_188 */
+ {SYS_BOOT5, (PTD | IEN | M3)}, /* gpio_189 */
+ {DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */
+ {DPM_EMU1, (IEN | M0)}, /* dpm_emu1 */
+ {DPM_EMU2, (IEN | M0)}, /* dpm_emu2 */
+ {DPM_EMU3, (IEN | M5)}, /* dispc2_data10 */
+ {DPM_EMU4, (IEN | M5)}, /* dispc2_data9 */
+ {DPM_EMU5, (IEN | M5)}, /* dispc2_data16 */
+ {DPM_EMU6, (IEN | M5)}, /* dispc2_data17 */
+ {DPM_EMU7, (IEN | M5)}, /* dispc2_hsync */
+ {DPM_EMU8, (IEN | M5)}, /* dispc2_pclk */
+ {DPM_EMU9, (IEN | M5)}, /* dispc2_vsync */
+ {DPM_EMU10, (IEN | M5)}, /* dispc2_de */
+ {DPM_EMU11, (IEN | M5)}, /* dispc2_data8 */
+ {DPM_EMU12, (IEN | M5)}, /* dispc2_data7 */
+ {DPM_EMU13, (IEN | M5)}, /* dispc2_data6 */
+ {DPM_EMU14, (IEN | M5)}, /* dispc2_data5 */
+ {DPM_EMU15, (IEN | M5)}, /* dispc2_data4 */
+ {DPM_EMU16, (M3)}, /* gpio_27 */
+ {DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */
+ {DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */
+ {DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
+ {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
+ {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
+ {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
+ {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
+ {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
+ {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
+ {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
+ {I2C4_SDA, (PTU | IEN | M0)} /* i2c4_sda */
+};
+
+const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
+ {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
+ {PAD1_SIM_CLK, (M0)}, /* sim_clk */
+ {PAD0_SIM_RESET, (M0)}, /* sim_reset */
+ {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */
+ {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */
+ {PAD1_FREF_XTAL_IN, (M0)}, /* # */
+ {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
+ {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
+ {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
+ {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */
+ {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
+ {PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)}, /* # */
+ {PAD0_FREF_CLK4_OUT, (M0)}, /* # */
+ {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
+ {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
+ {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
+ {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
+ {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */
+ {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
+ {PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 */
+ {PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 */
+ {PAD0_FREF_CLK4_OUT, (M3)}, /* gpio_wk8 */
+};
+
+#endif /* _EVM4430_MUX_DATA_H */
diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile
index ec493f5..b299e2f 100644
--- a/board/ti/panda/Makefile
+++ b/board/ti/panda/Makefile
@@ -25,9 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-ifndef CONFIG_SPL_BUILD
COBJS := panda.o
-endif
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 97320cb..b4271fb 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -65,6 +65,23 @@ int misc_init_r(void)
return 0;
}
+void set_muxconf_regs_essential(void)
+{
+ do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+ sizeof(core_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+
+ do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+ sizeof(wkup_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+
+ if (omap_revision() >= OMAP4460_ES1_0)
+ do_set_mux(CONTROL_PADCONF_WKUP,
+ wkup_padconf_array_essential_4460,
+ sizeof(wkup_padconf_array_essential_4460) /
+ sizeof(struct pad_conf_entry));
+}
+
void set_muxconf_regs_non_essential(void)
{
do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
@@ -93,10 +110,18 @@ void set_muxconf_regs_non_essential(void)
sizeof(struct pad_conf_entry));
}
-#ifdef CONFIG_GENERIC_MMC
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
int board_mmc_init(bd_t *bis)
{
omap_mmc_init(0);
return 0;
}
#endif
+
+/*
+ * get_board_rev() - get board revision
+ */
+u32 get_board_rev(void)
+{
+ return 0x20;
+}
diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
index 83d0c3f..c05170e 100644
--- a/board/ti/panda/panda_mux_data.h
+++ b/board/ti/panda/panda_mux_data.h
@@ -28,6 +28,58 @@
#include <asm/arch/mux_omap4.h>
+
+const struct pad_conf_entry core_padconf_array_essential[] = {
+
+{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
+{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
+{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
+{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
+{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
+{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
+{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
+{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
+{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
+{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
+{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
+{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
+{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
+{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
+{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
+{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
+{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
+{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
+{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
+{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
+{I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
+{I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
+{I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
+{I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
+{I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
+{I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
+{I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
+{I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */
+{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
+{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
+{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
+{UART3_TX_IRTX, (M0)} /* uart3_tx */
+
+};
+
+const struct pad_conf_entry wkup_padconf_array_essential[] = {
+
+{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
+{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
+{PAD1_SYS_32K, (IEN | M0)} /* sys_32k */
+
+};
+
+const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
+
+{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7, TPS */
+
+};
+
const struct pad_conf_entry core_padconf_array_non_essential[] = {
{GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */
{GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */
@@ -219,7 +271,7 @@ const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
{PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
{PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
{PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
- {PAD1_FREF_CLK3_REQ, M7}, /* safe mode */
+ {PAD1_FREF_CLK3_REQ, M7}, /* safe mode */
{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
{PAD0_FREF_CLK4_OUT, (PTU | M3)}, /* led status_2 */
{PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
diff --git a/board/ti/sdp4430/Makefile b/board/ti/sdp4430/Makefile
index 806fdf4..72ad3eb 100644
--- a/board/ti/sdp4430/Makefile
+++ b/board/ti/sdp4430/Makefile
@@ -25,8 +25,10 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
+COBJS := sdp.o
+
ifndef CONFIG_SPL_BUILD
-COBJS := sdp.o cmd_bat.o
+COBJS += cmd_bat.o
endif
SRCS := $(COBJS:.o=.c)
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index a5ea682..e1b853c 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -70,6 +70,23 @@ int misc_init_r(void)
return 0;
}
+void set_muxconf_regs_essential(void)
+{
+ do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_essential,
+ sizeof(core_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+
+ do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_essential,
+ sizeof(wkup_padconf_array_essential) /
+ sizeof(struct pad_conf_entry));
+
+ if (omap_revision() >= OMAP4460_ES1_0)
+ do_set_mux(CONTROL_PADCONF_WKUP,
+ wkup_padconf_array_essential_4460,
+ sizeof(wkup_padconf_array_essential_4460) /
+ sizeof(struct pad_conf_entry));
+}
+
void set_muxconf_regs_non_essential(void)
{
do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
@@ -81,7 +98,7 @@ void set_muxconf_regs_non_essential(void)
sizeof(struct pad_conf_entry));
}
-#ifdef CONFIG_GENERIC_MMC
+#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
int board_mmc_init(bd_t *bis)
{
omap_mmc_init(0);
@@ -89,3 +106,11 @@ int board_mmc_init(bd_t *bis)
return 0;
}
#endif
+
+/*
+ * get_board_rev() - get board revision
+ */
+u32 get_board_rev(void)
+{
+ return 0x20;
+}
diff --git a/board/ti/sdp4430/sdp4430_mux_data.h b/board/ti/sdp4430/sdp4430_mux_data.h
index 06efaea..1c6e0ee 100644
--- a/board/ti/sdp4430/sdp4430_mux_data.h
+++ b/board/ti/sdp4430/sdp4430_mux_data.h
@@ -28,6 +28,49 @@
#include <asm/arch/mux_omap4.h>
+const struct pad_conf_entry core_padconf_array_essential[] = {
+
+{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
+{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
+{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
+{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
+{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
+{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
+{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
+{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
+{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
+{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
+{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
+{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
+{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
+{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
+{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
+{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
+{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
+{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
+{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
+{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
+{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
+{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
+{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
+{UART3_TX_IRTX, (M0)} /* uart3_tx */
+
+};
+
+const struct pad_conf_entry wkup_padconf_array_essential[] = {
+
+{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
+{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
+{PAD1_SYS_32K, (IEN | M0)} /* sys_32k */
+
+};
+
+const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
+
+{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7, TPS */
+
+};
+
const struct pad_conf_entry core_padconf_array_non_essential[] = {
{GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */
{GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */
@@ -200,6 +243,15 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
{DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */
{DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */
{DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
+ {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
+ {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
+ {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
+ {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
+ {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
+ {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
+ {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
+ {I2C4_SDA, (PTU | IEN | M0)} /* i2c4_sda */
+
};
const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
@@ -214,7 +266,6 @@ const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
{PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
{PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 - Debug led-1 */
{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
- {PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 - Debug led-2 */
{PAD0_FREF_CLK4_OUT, (M3)}, /* gpio_wk8 - Debug led-3 */
{PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
{PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
diff --git a/board/vpac270/vpac270.c b/board/vpac270/vpac270.c
index 43bbdff..cf8e7b6 100644
--- a/board/vpac270/vpac270.c
+++ b/board/vpac270/vpac270.c
@@ -21,6 +21,7 @@
#include <common.h>
#include <asm/arch/hardware.h>
+#include <asm/arch/regs-mmc.h>
#include <netdev.h>
#include <serial.h>
#include <asm/io.h>
@@ -72,6 +73,14 @@ void dram_init_banksize(void)
#endif
}
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+ pxa_mmc_register(0);
+ return 0;
+}
+#endif
+
#ifdef CONFIG_CMD_USB
int usb_board_init(void)
{
diff --git a/boards.cfg b/boards.cfg
index 5304f80..c83d861 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -35,7 +35,7 @@
# Target ARCH CPU Board name Vendor SoC Options
###########################################################################################################
-integratorcp_cm1136 arm arm1136 integrator armltd - integratorcp
+integratorcp_cm1136 arm arm1136 integrator armltd - integratorcp:CM1136
qong arm arm1136 - davedenx mx31
mx31ads arm arm1136 - freescale mx31
imx31_litekit arm arm1136 - logicpd mx31
@@ -47,9 +47,9 @@ flea3 arm arm1136 - CarMedi
mx35pdk arm arm1136 - freescale mx35
omap2420h4 arm arm1136 - ti omap24xx
tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
-integratorap_cm720t arm arm720t integrator armltd - integratorap
-integratorap_cm920t arm arm920t integrator armltd - integratorap
-integratorcp_cm920t arm arm920t integrator armltd - integratorcp
+integratorap_cm720t arm arm720t integrator armltd - integratorap:CM720T
+integratorap_cm920t arm arm920t integrator armltd - integratorap:CM920T
+integratorcp_cm920t arm arm920t integrator armltd - integratorcp:CM920T
a320evb arm arm920t - faraday a320
at91rm9200ek arm arm920t at91rm9200ek atmel at91 at91rm9200ek
at91rm9200ek_ram arm arm920t at91rm9200ek atmel at91 at91rm9200ek:RAMBOOT
@@ -63,8 +63,8 @@ cm41xx arm arm920t - -
VCMA9 arm arm920t vcma9 mpl s3c24x0
smdk2410 arm arm920t - samsung s3c24x0
omap1510inn arm arm925t - ti
-integratorap_cm926ejs arm arm926ejs integrator armltd - integratorap
-integratorcp_cm926ejs arm arm926ejs integrator armltd - integratorcp
+integratorap_cm926ejs arm arm926ejs integrator armltd - integratorap:CM926EJ_S
+integratorcp_cm926ejs arm arm926ejs integrator armltd - integratorcp:CM924EJ_S
versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB
versatilepb arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_PB
versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB
@@ -121,6 +121,7 @@ pm9263 arm arm926ejs pm9263 ronetix
pm9g45 arm arm926ejs pm9g45 ronetix at91 pm9g45:AT91SAM9G45
da830evm arm arm926ejs da8xxevm davinci davinci
da850evm arm arm926ejs da8xxevm davinci davinci
+da850_am18xxevm arm arm926ejs da8xxevm davinci davinci
cam_enc_4xx arm arm926ejs cam_enc_4xx ait davinci cam_enc_4xx
hawkboard arm arm926ejs da8xxevm davinci davinci
hawkboard_nand arm arm926ejs da8xxevm davinci davinci hawkboard:NAND_U_BOOT
@@ -130,6 +131,7 @@ davinci_dm355evm arm arm926ejs dm355evm davinci
davinci_dm355leopard arm arm926ejs dm355leopard davinci davinci
davinci_dm365evm arm arm926ejs dm365evm davinci davinci
davinci_dm6467evm arm arm926ejs dm6467evm davinci davinci
+davinci_dm6467Tevm arm arm926ejs dm6467evm davinci davinci
davinci_dvevm arm arm926ejs dvevm davinci davinci
davinci_schmoogie arm arm926ejs schmoogie davinci davinci
davinci_sffsdr arm arm926ejs sffsdr davinci davinci
@@ -156,13 +158,14 @@ tx25 arm arm926ejs tx25 karo
zmx25 arm arm926ejs zmx25 syteco mx25
imx27lite arm arm926ejs imx27lite logicpd mx27
magnesium arm arm926ejs imx27lite logicpd mx27
+m28evk arm arm926ejs - denx mx28
nhk8815 arm arm926ejs nhk8815 st nomadik
nhk8815_onenand arm arm926ejs nhk8815 st nomadik nhk8815:BOOT_ONENAND
omap5912osk arm arm926ejs - ti omap
edminiv2 arm arm926ejs - LaCie orion5x
dkb arm arm926ejs - Marvell pantheon
-integratorap_cm946es arm arm946es integrator armltd - integratorap
-integratorcp_cm946es arm arm946es integrator armltd - integratorcp
+integratorap_cm946es arm arm946es integrator armltd - integratorap:CM946ES
+integratorcp_cm946es arm arm946es integrator armltd - integratorcp:CM946ES
ca9x4_ct_vxp arm armv7 vexpress armltd
highbank arm armv7 highbank - highbank
am335x_evm arm armv7 am335x ti am33xx
@@ -193,6 +196,7 @@ omap3_sdp3430 arm armv7 sdp3430 ti
devkit8000 arm armv7 devkit8000 timll omap3
omap4_panda arm armv7 panda ti omap4
omap4_sdp4430 arm armv7 sdp4430 ti omap4
+omap5_evm arm armv7 omap5_evm ti omap5
s5p_goni arm armv7 goni samsung s5pc1xx
smdkc100 arm armv7 smdkc100 samsung s5pc1xx
origen arm armv7 origen samsung s5pc2xx
@@ -213,8 +217,6 @@ balloon3 arm pxa
cerf250 arm pxa
colibri_pxa270 arm pxa
cradle arm pxa
-csb226 arm pxa
-innokom arm pxa
lubbock arm pxa
palmld arm pxa
palmtc arm pxa
diff --git a/common/usb.c b/common/usb.c
index bed5116..4418c70 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -263,18 +263,24 @@ int usb_maxpacket(struct usb_device *dev, unsigned long pipe)
return dev->epmaxpacketin[((pipe>>15) & 0xf)];
}
-/* The routine usb_set_maxpacket_ep() is extracted from the loop of routine
+/*
+ * The routine usb_set_maxpacket_ep() is extracted from the loop of routine
* usb_set_maxpacket(), because the optimizer of GCC 4.x chokes on this routine
* when it is inlined in 1 single routine. What happens is that the register r3
* is used as loop-count 'i', but gets overwritten later on.
* This is clearly a compiler bug, but it is easier to workaround it here than
* to update the compiler (Occurs with at least several GCC 4.{1,2},x
* CodeSourcery compilers like e.g. 2007q3, 2008q1, 2008q3 lite editions on ARM)
+ *
+ * NOTE: Similar behaviour was observed with GCC4.6 on ARMv5.
*/
static void __attribute__((noinline))
-usb_set_maxpacket_ep(struct usb_device *dev, struct usb_endpoint_descriptor *ep)
+usb_set_maxpacket_ep(struct usb_device *dev, int if_idx, int ep_idx)
{
int b;
+ struct usb_endpoint_descriptor *ep;
+
+ ep = &dev->config.if_desc[if_idx].ep_desc[ep_idx];
b = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
@@ -313,8 +319,7 @@ int usb_set_maxpacket(struct usb_device *dev)
for (i = 0; i < dev->config.desc.bNumInterfaces; i++)
for (ii = 0; ii < dev->config.if_desc[i].desc.bNumEndpoints; ii++)
- usb_set_maxpacket_ep(dev,
- &dev->config.if_desc[i].ep_desc[ii]);
+ usb_set_maxpacket_ep(dev, i, ii);
return 0;
}
diff --git a/doc/README.m28 b/doc/README.m28
new file mode 100644
index 0000000..b749ce0
--- /dev/null
+++ b/doc/README.m28
@@ -0,0 +1,223 @@
+DENX M28EVK
+===========
+
+This document describes the DENX M28/M28EVK U-Boot port. This document mostly
+covers topics related to making the module/board bootable.
+
+Terminology
+-----------
+
+The dollar symbol ($) introduces a snipped of shell code. This shall be typed
+into the unix command prompt in U-Boot source code root directory.
+
+The (=>) introduces a snipped of code that should by typed into U-Boot command
+prompt.
+
+Contents
+--------
+
+0) Files of the M28/M28EVK port
+1) Prerequisites
+2) Compiling U-Boot for M28
+3) Installation of U-Boot for M28EVK to SD card
+4) Installation of U-Boot for M28 to NAND flash
+
+0) Files of the M28/M28EVK port
+-------------------------------
+
+arch/arm/cpu/arm926ejs/mx28/ - The CPU support code for the Freescale i.MX28
+arch/arm/include/asm/arch-mx28/ - Header files for the Freescale i.MX28
+board/denx/m28evk/ - M28EVK board specific files
+include/configs/m28evk.h - M28EVK configuration file
+
+1) Prerequisites
+----------------
+
+To make the M28 module or the M28 module or M28EVK board bootable, some tools
+are necessary. The first one is the "elftosb" tool distributed by Freescale
+Semiconductor. The other tool is the "mxsboot" tool found in U-Boot source tree.
+
+Firstly, obtain the elftosb archive from the following location:
+
+ http://foss.doredevelopment.dk/mirrors/imx/elftosb-10.12.01.tar.gz
+
+We use a $VER variable here to denote the current version. At the time of
+writing of this document, that is "10.12.01". To obtain the file from command
+line, use:
+
+ $ VER="10.12.01"
+ $ wget http://foss.doredevelopment.dk/mirrors/imx/elftosb-${VER}.tar.gz
+
+Extract the file:
+
+ $ tar xzf elftosb-${VER}.tar.gz
+
+Compile the file. We need to manually tell the linker to use also libm:
+
+ $ cd elftosb-${VER}/
+ $ make LIBS="-lstdc++ -lm" elftosb
+
+Optionally, remove debugging symbols from elftosb:
+
+ $ strip bld/linux/elftosb
+
+Finally, install the "elftosb" binary. The "install" target is missing, so just
+copy the binary by hand:
+
+ $ sudo cp bld/linux/elftosb /usr/local/bin/
+
+Make sure the "elftosb" binary can be found in your $PATH, in this case this
+means "/usr/local/bin/" has to be in your $PATH.
+
+2) Compiling U-Boot for M28
+---------------------------
+
+Compiling the U-Boot for M28 is straightforward and done as compiling U-Boot
+for any other ARM device. For cross-compiler setup, please refer to ELDK5.0
+documentation. First, clean up the source code:
+
+ $ make mrproper
+
+Next, configure U-Boot for M28EVK:
+
+ $ make m28evk_config
+
+Lastly, compile U-Boot and prepare a "BootStream". The "BootStream" is a special
+type of file, which the i.MX28 CPU can boot. This is handled by the following
+command:
+
+ $ make u-boot.sb
+
+HINT: To speed-up the build process, you can add -j<N>, where N is number of
+ compiler instances that'll run in parallel.
+
+The code produces "u-boot.sb" file. This file needs to be augmented with a
+proper header to allow successful boot from SD or NAND. Adding the header is
+discussed in the following chapters.
+
+3) Installation of U-Boot for M28EVK to SD card
+-----------------------------------------------
+
+To boot an M28 from SD, set the boot mode DIP switches according to i.MX28
+manual chapter 12.2.1 (Table 12-2), PORT=SSP0, SD/MMC master on SSP0, 3.3V.
+
+An SD card the i.MX28 CPU can use to boot U-Boot must contain a DOS partition
+table, which in turn carries a partition of special type and which contains a
+special header. The rest of partitions in the DOS partition table can be used
+by the user.
+
+To prepare such partition, use your favourite partitioning tool. The partition
+must have the following parameters:
+
+ * Start sector .......... sector 2048
+ * Partition size ........ at least 1024 kb
+ * Partition type ........ 0x53 (sometimes "OnTrack DM6 Aux3")
+
+For example in Linux fdisk, the sequence for a clear card is the following:
+
+ * o ..................... create a clear partition table
+ * n ..................... create new partition
+ * p ............. primary partition
+ * 1 ............. first partition
+ * 2048 .......... first sector is 2048
+ * +1M ........... make the partition 1Mb big
+ * t 1 ................... change first partition ID
+ * 53 ............ change the ID to 0x53 (OnTrack DM6 Aux3)
+ * <create other partitions>
+ * w ..................... write partition table to disk
+
+The partition layout is ready, next the special partition must be filled with
+proper contents. The contents is generated by running the following command (see
+chapter 2)):
+
+ $ ./tools/mxsboot sd u-boot.sb u-boot.sd
+
+The resulting file, "u-boot.sd", shall then be written to the partition. In this
+case, we assume the first partition of the SD card is /dev/mmcblk0p1:
+
+ $ dd if=u-boot.sd of=/dev/mmcblk0p1
+
+Last step is to insert the card into M28EVK and boot.
+
+NOTE: If the user needs to adjust the start sector, the "mxsboot" tool contains
+ a "-p" switch for that purpose. The "-p" switch takes the sector number as
+ an argument.
+
+4) Installation of U-Boot for M28 to NAND flash
+-----------------------------------------------
+
+To boot an M28 from NAND, set the boot mode DIP switches according to i.MX28
+manual chapter 12.2.1 (Table 12-2), PORT=GPMI, NAND 1.8 V.
+
+There are two possibilities when preparing an image writable to NAND flash.
+
+ I) The NAND wasn't written at all yet or the BCB is broken
+ ----------------------------------------------------------
+ In this case, both BCB (FCB and DBBT) and firmware needs to be
+ written to NAND. To generate NAND image containing all these,
+ there is a tool called "mxsboot" in the "tools/" directory. The tool
+ is invoked on "u-boot.sb" file from chapter 2):
+
+ $ ./tools/mxsboot nand u-boot.sb u-boot.nand
+
+ NOTE: The above invokation works for NAND flash with geometry of
+ 2048b per page, 64b OOB data, 128kb erase size. If your chip
+ has a different geometry, please use:
+
+ -w <size> change page size (default 2048 b)
+ -o <size> change oob size (default 64 b)
+ -e <size> change erase size (default 131072 b)
+
+ The geometry information can be obtained from running U-Boot
+ on M28 by issuing the "nand info" command.
+
+ The resulting file, "u-boot.nand" can be written directly to NAND
+ from the U-Boot prompt. To simplify the process, the U-Boot default
+ environment contains script "update_nand_full" to update the system.
+
+ This script expects a working TFTP server containing the file
+ "u-boot.nand" in it's root directory. This can be changed by
+ adjusting the "update_nand_full_filename" varible.
+
+ To update the system, run the following in U-Boot prompt:
+
+ => run update_nand_full
+
+ In case you would only need to update the bootloader in future,
+ see II) below.
+
+ II) The NAND was already written with a good BCB
+ ------------------------------------------------
+ This part applies after the part I) above was done at least once.
+
+ If part I) above was done correctly already, there is no need to
+ write the FCB and DBBT parts of NAND again. It's possible to upgrade
+ only the bootloader image.
+
+ To simplify the process of firmware update, the U-Boot default
+ environment contains script "update_nand_firmware" to update only
+ the firmware, without rewriting FCB and DBBT.
+
+ This script expects a working TFTP server containing the file
+ "u-boot.sb" in it's root directory. This can be changed by
+ adjusting the "update_nand_firmware_filename" varible.
+
+ To update the system, run the following in U-Boot prompt:
+
+ => run update_nand_firmware
+
+ III) Special settings for the update scripts
+ --------------------------------------------
+ There is a slight possibility of the user wanting to adjust the
+ STRIDE and COUNT options of the NAND boot. For description of these,
+ see i.MX28 manual section 12.12.1.2 and 12.12.1.3.
+
+ The update scripts take this possibility into account. In case the
+ user changes STRIDE by blowing fuses, the user also has to change
+ "update_nand_stride" variable. In case the user changes COUNT by
+ blowing fuses, the user also has to change "update_nand_count"
+ variable for the update scripts to work correctly.
+
+ In case the user needs to boot a firmware image bigger than 1Mb, the
+ user has to adjust the "update_nand_firmware_maxsz" variable for the
+ update scripts to work properly.
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 3d9c9f1..5d864b5 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -26,6 +26,7 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libdma.o
COBJS-$(CONFIG_FSLDMAFEC) += MCD_tasksInit.o MCD_dmaApi.o MCD_tasks.o
+COBJS-$(CONFIG_APBH_DMA) += apbh_dma.o
COBJS-$(CONFIG_FSL_DMA) += fsl_dma.o
COBJS-$(CONFIG_OMAP3_DMA) += omap3_dma.o
diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c
new file mode 100644
index 0000000..69a1042
--- /dev/null
+++ b/drivers/dma/apbh_dma.c
@@ -0,0 +1,691 @@
+/*
+ * Freescale i.MX28 APBH DMA driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/list.h>
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/dma.h>
+
+static struct mxs_dma_chan mxs_dma_channels[MXS_MAX_DMA_CHANNELS];
+
+/*
+ * Test is the DMA channel is valid channel
+ */
+int mxs_dma_validate_chan(int channel)
+{
+ struct mxs_dma_chan *pchan;
+
+ if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS))
+ return -EINVAL;
+
+ pchan = mxs_dma_channels + channel;
+ if (!(pchan->flags & MXS_DMA_FLAGS_ALLOCATED))
+ return -EINVAL;
+
+ return 0;
+}
+
+/*
+ * Enable a DMA channel.
+ *
+ * If the given channel has any DMA descriptors on its active list, this
+ * function causes the DMA hardware to begin processing them.
+ *
+ * This function marks the DMA channel as "busy," whether or not there are any
+ * descriptors to process.
+ */
+int mxs_dma_enable(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ unsigned int sem;
+ struct mxs_dma_chan *pchan;
+ struct mxs_dma_desc *pdesc;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ pchan = mxs_dma_channels + channel;
+
+ if (pchan->pending_num == 0) {
+ pchan->flags |= MXS_DMA_FLAGS_BUSY;
+ return 0;
+ }
+
+ pdesc = list_first_entry(&pchan->active, struct mxs_dma_desc, node);
+ if (pdesc == NULL)
+ return -EFAULT;
+
+ if (pchan->flags & MXS_DMA_FLAGS_BUSY) {
+ if (!(pdesc->cmd.data & MXS_DMA_DESC_CHAIN))
+ return 0;
+
+ sem = mxs_dma_read_semaphore(channel);
+ if (sem == 0)
+ return 0;
+
+ if (sem == 1) {
+ pdesc = list_entry(pdesc->node.next,
+ struct mxs_dma_desc, node);
+ writel(mxs_dma_cmd_address(pdesc),
+ &apbh_regs->ch[channel].hw_apbh_ch_nxtcmdar);
+ }
+ writel(pchan->pending_num,
+ &apbh_regs->ch[channel].hw_apbh_ch_sema);
+ pchan->active_num += pchan->pending_num;
+ pchan->pending_num = 0;
+ } else {
+ pchan->active_num += pchan->pending_num;
+ pchan->pending_num = 0;
+ writel(mxs_dma_cmd_address(pdesc),
+ &apbh_regs->ch[channel].hw_apbh_ch_nxtcmdar);
+ writel(pchan->active_num,
+ &apbh_regs->ch[channel].hw_apbh_ch_sema);
+ writel(1 << (channel + APBH_CTRL0_CLKGATE_CHANNEL_OFFSET),
+ &apbh_regs->hw_apbh_ctrl0_clr);
+ }
+
+ pchan->flags |= MXS_DMA_FLAGS_BUSY;
+ return 0;
+}
+
+/*
+ * Disable a DMA channel.
+ *
+ * This function shuts down a DMA channel and marks it as "not busy." Any
+ * descriptors on the active list are immediately moved to the head of the
+ * "done" list, whether or not they have actually been processed by the
+ * hardware. The "ready" flags of these descriptors are NOT cleared, so they
+ * still appear to be active.
+ *
+ * This function immediately shuts down a DMA channel's hardware, aborting any
+ * I/O that may be in progress, potentially leaving I/O hardware in an undefined
+ * state. It is unwise to call this function if there is ANY chance the hardware
+ * is still processing a command.
+ */
+int mxs_dma_disable(int channel)
+{
+ struct mxs_dma_chan *pchan;
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ pchan = mxs_dma_channels + channel;
+
+ if (!(pchan->flags & MXS_DMA_FLAGS_BUSY))
+ return -EINVAL;
+
+ writel(1 << (channel + APBH_CTRL0_CLKGATE_CHANNEL_OFFSET),
+ &apbh_regs->hw_apbh_ctrl0_set);
+
+ pchan->flags &= ~MXS_DMA_FLAGS_BUSY;
+ pchan->active_num = 0;
+ pchan->pending_num = 0;
+ list_splice_init(&pchan->active, &pchan->done);
+
+ return 0;
+}
+
+/*
+ * Resets the DMA channel hardware.
+ */
+int mxs_dma_reset(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ writel(1 << (channel + APBH_CHANNEL_CTRL_RESET_CHANNEL_OFFSET),
+ &apbh_regs->hw_apbh_channel_ctrl_set);
+
+ return 0;
+}
+
+/*
+ * Freeze a DMA channel.
+ *
+ * This function causes the channel to continuously fail arbitration for bus
+ * access, which halts all forward progress without losing any state. A call to
+ * mxs_dma_unfreeze() will cause the channel to continue its current operation
+ * with no ill effect.
+ */
+int mxs_dma_freeze(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ writel(1 << (channel + APBH_CHANNEL_CTRL_FREEZE_CHANNEL_OFFSET),
+ &apbh_regs->hw_apbh_channel_ctrl_set);
+
+ return 0;
+}
+
+/*
+ * Unfreeze a DMA channel.
+ *
+ * This function reverses the effect of mxs_dma_freeze(), enabling the DMA
+ * channel to continue from where it was frozen.
+ */
+int mxs_dma_unfreeze(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ writel(1 << (channel + APBH_CHANNEL_CTRL_FREEZE_CHANNEL_OFFSET),
+ &apbh_regs->hw_apbh_channel_ctrl_clr);
+
+ return 0;
+}
+
+/*
+ * Read a DMA channel's hardware semaphore.
+ *
+ * As used by the MXS platform's DMA software, the DMA channel's hardware
+ * semaphore reflects the number of DMA commands the hardware will process, but
+ * has not yet finished. This is a volatile value read directly from hardware,
+ * so it must be be viewed as immediately stale.
+ *
+ * If the channel is not marked busy, or has finished processing all its
+ * commands, this value should be zero.
+ *
+ * See mxs_dma_append() for details on how DMA command blocks must be configured
+ * to maintain the expected behavior of the semaphore's value.
+ */
+int mxs_dma_read_semaphore(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ uint32_t tmp;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ tmp = readl(&apbh_regs->ch[channel].hw_apbh_ch_sema);
+
+ tmp &= APBH_CHn_SEMA_PHORE_MASK;
+ tmp >>= APBH_CHn_SEMA_PHORE_OFFSET;
+
+ return tmp;
+}
+
+/*
+ * Enable or disable DMA interrupt.
+ *
+ * This function enables the given DMA channel to interrupt the CPU.
+ */
+int mxs_dma_enable_irq(int channel, int enable)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ if (enable)
+ writel(1 << (channel + APBH_CTRL1_CH_CMDCMPLT_IRQ_EN_OFFSET),
+ &apbh_regs->hw_apbh_ctrl1_set);
+ else
+ writel(1 << (channel + APBH_CTRL1_CH_CMDCMPLT_IRQ_EN_OFFSET),
+ &apbh_regs->hw_apbh_ctrl1_clr);
+
+ return 0;
+}
+
+/*
+ * Check if a DMA interrupt is pending.
+ */
+int mxs_dma_irq_is_pending(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ uint32_t tmp;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ tmp = readl(&apbh_regs->hw_apbh_ctrl1);
+ tmp |= readl(&apbh_regs->hw_apbh_ctrl2);
+
+ return (tmp >> channel) & 1;
+}
+
+/*
+ * Clear DMA interrupt.
+ *
+ * The software that is using the DMA channel must register to receive its
+ * interrupts and, when they arrive, must call this function to clear them.
+ */
+int mxs_dma_ack_irq(int channel)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ writel(1 << channel, &apbh_regs->hw_apbh_ctrl1_clr);
+ writel(1 << channel, &apbh_regs->hw_apbh_ctrl2_clr);
+
+ return 0;
+}
+
+/*
+ * Request to reserve a DMA channel
+ */
+int mxs_dma_request(int channel)
+{
+ struct mxs_dma_chan *pchan;
+
+ if ((channel < 0) || (channel >= MXS_MAX_DMA_CHANNELS))
+ return -EINVAL;
+
+ pchan = mxs_dma_channels + channel;
+ if ((pchan->flags & MXS_DMA_FLAGS_VALID) != MXS_DMA_FLAGS_VALID)
+ return -ENODEV;
+
+ if (pchan->flags & MXS_DMA_FLAGS_ALLOCATED)
+ return -EBUSY;
+
+ pchan->flags |= MXS_DMA_FLAGS_ALLOCATED;
+ pchan->active_num = 0;
+ pchan->pending_num = 0;
+
+ INIT_LIST_HEAD(&pchan->active);
+ INIT_LIST_HEAD(&pchan->done);
+
+ return 0;
+}
+
+/*
+ * Release a DMA channel.
+ *
+ * This function releases a DMA channel from its current owner.
+ *
+ * The channel will NOT be released if it's marked "busy" (see
+ * mxs_dma_enable()).
+ */
+int mxs_dma_release(int channel)
+{
+ struct mxs_dma_chan *pchan;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ pchan = mxs_dma_channels + channel;
+
+ if (pchan->flags & MXS_DMA_FLAGS_BUSY)
+ return -EBUSY;
+
+ pchan->dev = 0;
+ pchan->active_num = 0;
+ pchan->pending_num = 0;
+ pchan->flags &= ~MXS_DMA_FLAGS_ALLOCATED;
+
+ return 0;
+}
+
+/*
+ * Allocate DMA descriptor
+ */
+struct mxs_dma_desc *mxs_dma_desc_alloc(void)
+{
+ struct mxs_dma_desc *pdesc;
+
+ pdesc = memalign(MXS_DMA_ALIGNMENT, sizeof(struct mxs_dma_desc));
+
+ if (pdesc == NULL)
+ return NULL;
+
+ memset(pdesc, 0, sizeof(*pdesc));
+ pdesc->address = (dma_addr_t)pdesc;
+
+ return pdesc;
+};
+
+/*
+ * Free DMA descriptor
+ */
+void mxs_dma_desc_free(struct mxs_dma_desc *pdesc)
+{
+ if (pdesc == NULL)
+ return;
+
+ free(pdesc);
+}
+
+/*
+ * Return the address of the command within a descriptor.
+ */
+unsigned int mxs_dma_cmd_address(struct mxs_dma_desc *desc)
+{
+ return desc->address + offsetof(struct mxs_dma_desc, cmd);
+}
+
+/*
+ * Check if descriptor is on a channel's active list.
+ *
+ * This function returns the state of a descriptor's "ready" flag. This flag is
+ * usually set only if the descriptor appears on a channel's active list. The
+ * descriptor may or may not have already been processed by the hardware.
+ *
+ * The "ready" flag is set when the descriptor is submitted to a channel by a
+ * call to mxs_dma_append() or mxs_dma_append_list(). The "ready" flag is
+ * cleared when a processed descriptor is moved off the active list by a call
+ * to mxs_dma_finish(). The "ready" flag is NOT cleared if the descriptor is
+ * aborted by a call to mxs_dma_disable().
+ */
+int mxs_dma_desc_pending(struct mxs_dma_desc *pdesc)
+{
+ return pdesc->flags & MXS_DMA_DESC_READY;
+}
+
+/*
+ * Add a DMA descriptor to a channel.
+ *
+ * If the descriptor list for this channel is not empty, this function sets the
+ * CHAIN bit and the NEXTCMD_ADDR fields in the last descriptor's DMA command so
+ * it will chain to the new descriptor's command.
+ *
+ * Then, this function marks the new descriptor as "ready," adds it to the end
+ * of the active descriptor list, and increments the count of pending
+ * descriptors.
+ *
+ * The MXS platform DMA software imposes some rules on DMA commands to maintain
+ * important invariants. These rules are NOT checked, but they must be carefully
+ * applied by software that uses MXS DMA channels.
+ *
+ * Invariant:
+ * The DMA channel's hardware semaphore must reflect the number of DMA
+ * commands the hardware will process, but has not yet finished.
+ *
+ * Explanation:
+ * A DMA channel begins processing commands when its hardware semaphore is
+ * written with a value greater than zero, and it stops processing commands
+ * when the semaphore returns to zero.
+ *
+ * When a channel finishes a DMA command, it will decrement its semaphore if
+ * the DECREMENT_SEMAPHORE bit is set in that command's flags bits.
+ *
+ * In principle, it's not necessary for the DECREMENT_SEMAPHORE to be set,
+ * unless it suits the purposes of the software. For example, one could
+ * construct a series of five DMA commands, with the DECREMENT_SEMAPHORE
+ * bit set only in the last one. Then, setting the DMA channel's hardware
+ * semaphore to one would cause the entire series of five commands to be
+ * processed. However, this example would violate the invariant given above.
+ *
+ * Rule:
+ * ALL DMA commands MUST have the DECREMENT_SEMAPHORE bit set so that the DMA
+ * channel's hardware semaphore will be decremented EVERY time a command is
+ * processed.
+ */
+int mxs_dma_desc_append(int channel, struct mxs_dma_desc *pdesc)
+{
+ struct mxs_dma_chan *pchan;
+ struct mxs_dma_desc *last;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ pchan = mxs_dma_channels + channel;
+
+ pdesc->cmd.next = mxs_dma_cmd_address(pdesc);
+ pdesc->flags |= MXS_DMA_DESC_FIRST | MXS_DMA_DESC_LAST;
+
+ if (!list_empty(&pchan->active)) {
+ last = list_entry(pchan->active.prev, struct mxs_dma_desc,
+ node);
+
+ pdesc->flags &= ~MXS_DMA_DESC_FIRST;
+ last->flags &= ~MXS_DMA_DESC_LAST;
+
+ last->cmd.next = mxs_dma_cmd_address(pdesc);
+ last->cmd.data |= MXS_DMA_DESC_CHAIN;
+ }
+ pdesc->flags |= MXS_DMA_DESC_READY;
+ if (pdesc->flags & MXS_DMA_DESC_FIRST)
+ pchan->pending_num++;
+ list_add_tail(&pdesc->node, &pchan->active);
+
+ return ret;
+}
+
+/*
+ * Retrieve processed DMA descriptors.
+ *
+ * This function moves all the descriptors from the DMA channel's "done" list to
+ * the head of the given list.
+ */
+int mxs_dma_get_finished(int channel, struct list_head *head)
+{
+ struct mxs_dma_chan *pchan;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ if (head == NULL)
+ return 0;
+
+ pchan = mxs_dma_channels + channel;
+
+ list_splice(&pchan->done, head);
+
+ return 0;
+}
+
+/*
+ * Clean up processed DMA descriptors.
+ *
+ * This function removes processed DMA descriptors from the "active" list. Pass
+ * in a non-NULL list head to get the descriptors moved to your list. Pass NULL
+ * to get the descriptors moved to the channel's "done" list. Descriptors on
+ * the "done" list can be retrieved with mxs_dma_get_finished().
+ *
+ * This function marks the DMA channel as "not busy" if no unprocessed
+ * descriptors remain on the "active" list.
+ */
+int mxs_dma_finish(int channel, struct list_head *head)
+{
+ int sem;
+ struct mxs_dma_chan *pchan;
+ struct list_head *p, *q;
+ struct mxs_dma_desc *pdesc;
+ int ret;
+
+ ret = mxs_dma_validate_chan(channel);
+ if (ret)
+ return ret;
+
+ pchan = mxs_dma_channels + channel;
+
+ sem = mxs_dma_read_semaphore(channel);
+ if (sem < 0)
+ return sem;
+
+ if (sem == pchan->active_num)
+ return 0;
+
+ list_for_each_safe(p, q, &pchan->active) {
+ if ((pchan->active_num) <= sem)
+ break;
+
+ pdesc = list_entry(p, struct mxs_dma_desc, node);
+ pdesc->flags &= ~MXS_DMA_DESC_READY;
+
+ if (head)
+ list_move_tail(p, head);
+ else
+ list_move_tail(p, &pchan->done);
+
+ if (pdesc->flags & MXS_DMA_DESC_LAST)
+ pchan->active_num--;
+ }
+
+ if (sem == 0)
+ pchan->flags &= ~MXS_DMA_FLAGS_BUSY;
+
+ return 0;
+}
+
+/*
+ * Wait for DMA channel to complete
+ */
+int mxs_dma_wait_complete(uint32_t timeout, unsigned int chan)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ int ret;
+
+ ret = mxs_dma_validate_chan(chan);
+ if (ret)
+ return ret;
+
+ if (mx28_wait_mask_set(&apbh_regs->hw_apbh_ctrl1_reg,
+ 1 << chan, timeout)) {
+ ret = -ETIMEDOUT;
+ mxs_dma_reset(chan);
+ }
+
+ return 0;
+}
+
+/*
+ * Execute the DMA channel
+ */
+int mxs_dma_go(int chan)
+{
+ uint32_t timeout = 10000;
+ int ret;
+
+ LIST_HEAD(tmp_desc_list);
+
+ mxs_dma_enable_irq(chan, 1);
+ mxs_dma_enable(chan);
+
+ /* Wait for DMA to finish. */
+ ret = mxs_dma_wait_complete(timeout, chan);
+
+ /* Clear out the descriptors we just ran. */
+ mxs_dma_finish(chan, &tmp_desc_list);
+
+ /* Shut the DMA channel down. */
+ mxs_dma_ack_irq(chan);
+ mxs_dma_reset(chan);
+ mxs_dma_enable_irq(chan, 0);
+ mxs_dma_disable(chan);
+
+ return ret;
+}
+
+/*
+ * Initialize the DMA hardware
+ */
+int mxs_dma_init(void)
+{
+ struct mx28_apbh_regs *apbh_regs =
+ (struct mx28_apbh_regs *)MXS_APBH_BASE;
+ struct mxs_dma_chan *pchan;
+ int ret, channel;
+
+ mx28_reset_block(&apbh_regs->hw_apbh_ctrl0_reg);
+
+#ifdef CONFIG_APBH_DMA_BURST8
+ writel(APBH_CTRL0_AHB_BURST8_EN,
+ &apbh_regs->hw_apbh_ctrl0_set);
+#else
+ writel(APBH_CTRL0_AHB_BURST8_EN,
+ &apbh_regs->hw_apbh_ctrl0_clr);
+#endif
+
+#ifdef CONFIG_APBH_DMA_BURST
+ writel(APBH_CTRL0_APB_BURST_EN,
+ &apbh_regs->hw_apbh_ctrl0_set);
+#else
+ writel(APBH_CTRL0_APB_BURST_EN,
+ &apbh_regs->hw_apbh_ctrl0_clr);
+#endif
+
+ for (channel = 0; channel < MXS_MAX_DMA_CHANNELS; channel++) {
+ pchan = mxs_dma_channels + channel;
+ pchan->flags = MXS_DMA_FLAGS_VALID;
+
+ ret = mxs_dma_request(channel);
+
+ if (ret) {
+ printf("MXS DMA: Can't acquire DMA channel %i\n",
+ channel);
+
+ goto err;
+ }
+
+ mxs_dma_reset(channel);
+ mxs_dma_ack_irq(channel);
+ }
+
+ return 0;
+
+err:
+ while (--channel >= 0)
+ mxs_dma_release(channel);
+ return ret;
+}
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index f505813..e1142d1 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -30,6 +30,7 @@ COBJS-$(CONFIG_KIRKWOOD_GPIO) += kw_gpio.o
COBJS-$(CONFIG_MARVELL_GPIO) += mvgpio.o
COBJS-$(CONFIG_MARVELL_MFP) += mvmfp.o
COBJS-$(CONFIG_MXC_GPIO) += mxc_gpio.o
+COBJS-$(CONFIG_MXS_GPIO) += mxs_gpio.o
COBJS-$(CONFIG_PCA953X) += pca953x.o
COBJS-$(CONFIG_PCA9698) += pca9698.o
COBJS-$(CONFIG_S5P) += s5p_gpio.o
diff --git a/drivers/gpio/mxs_gpio.c b/drivers/gpio/mxs_gpio.c
new file mode 100644
index 0000000..b7e9591
--- /dev/null
+++ b/drivers/gpio/mxs_gpio.c
@@ -0,0 +1,136 @@
+/*
+ * Freescale i.MX28 GPIO control code
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+
+#if defined(CONFIG_MX23)
+#define PINCTRL_BANKS 3
+#define PINCTRL_DOUT(n) (0x0500 + ((n) * 0x10))
+#define PINCTRL_DIN(n) (0x0600 + ((n) * 0x10))
+#define PINCTRL_DOE(n) (0x0700 + ((n) * 0x10))
+#define PINCTRL_PIN2IRQ(n) (0x0800 + ((n) * 0x10))
+#define PINCTRL_IRQEN(n) (0x0900 + ((n) * 0x10))
+#define PINCTRL_IRQSTAT(n) (0x0c00 + ((n) * 0x10))
+#elif defined(CONFIG_MX28)
+#define PINCTRL_BANKS 5
+#define PINCTRL_DOUT(n) (0x0700 + ((n) * 0x10))
+#define PINCTRL_DIN(n) (0x0900 + ((n) * 0x10))
+#define PINCTRL_DOE(n) (0x0b00 + ((n) * 0x10))
+#define PINCTRL_PIN2IRQ(n) (0x1000 + ((n) * 0x10))
+#define PINCTRL_IRQEN(n) (0x1100 + ((n) * 0x10))
+#define PINCTRL_IRQSTAT(n) (0x1400 + ((n) * 0x10))
+#else
+#error "Please select CONFIG_MX23 or CONFIG_MX28"
+#endif
+
+#define GPIO_INT_FALL_EDGE 0x0
+#define GPIO_INT_LOW_LEV 0x1
+#define GPIO_INT_RISE_EDGE 0x2
+#define GPIO_INT_HIGH_LEV 0x3
+#define GPIO_INT_LEV_MASK (1 << 0)
+#define GPIO_INT_POL_MASK (1 << 1)
+
+void mxs_gpio_init(void)
+{
+ int i;
+
+ for (i = 0; i < PINCTRL_BANKS; i++) {
+ writel(0, MXS_PINCTRL_BASE + PINCTRL_PIN2IRQ(i));
+ writel(0, MXS_PINCTRL_BASE + PINCTRL_IRQEN(i));
+ /* Use SCT address here to clear the IRQSTAT bits */
+ writel(0xffffffff, MXS_PINCTRL_BASE + PINCTRL_IRQSTAT(i) + 8);
+ }
+}
+
+int gpio_get_value(int gp)
+{
+ uint32_t bank = PAD_BANK(gp);
+ uint32_t offset = PINCTRL_DIN(bank);
+ struct mx28_register *reg =
+ (struct mx28_register *)(MXS_PINCTRL_BASE + offset);
+
+ return (readl(&reg->reg) >> PAD_PIN(gp)) & 1;
+}
+
+void gpio_set_value(int gp, int value)
+{
+ uint32_t bank = PAD_BANK(gp);
+ uint32_t offset = PINCTRL_DOUT(bank);
+ struct mx28_register *reg =
+ (struct mx28_register *)(MXS_PINCTRL_BASE + offset);
+
+ if (value)
+ writel(1 << PAD_PIN(gp), &reg->reg_set);
+ else
+ writel(1 << PAD_PIN(gp), &reg->reg_clr);
+}
+
+int gpio_direction_input(int gp)
+{
+ uint32_t bank = PAD_BANK(gp);
+ uint32_t offset = PINCTRL_DOE(bank);
+ struct mx28_register *reg =
+ (struct mx28_register *)(MXS_PINCTRL_BASE + offset);
+
+ writel(1 << PAD_PIN(gp), &reg->reg_clr);
+
+ return 0;
+}
+
+int gpio_direction_output(int gp, int value)
+{
+ uint32_t bank = PAD_BANK(gp);
+ uint32_t offset = PINCTRL_DOE(bank);
+ struct mx28_register *reg =
+ (struct mx28_register *)(MXS_PINCTRL_BASE + offset);
+
+ writel(1 << PAD_PIN(gp), &reg->reg_set);
+
+ gpio_set_value(gp, value);
+
+ return 0;
+}
+
+int gpio_request(int gp, const char *label)
+{
+ if (PAD_BANK(gp) > PINCTRL_BANKS)
+ return -EINVAL;
+
+ return 0;
+}
+
+void gpio_free(int gp)
+{
+}
+
+void gpio_toggle_value(int gp)
+{
+ gpio_set_value(gp, !gpio_get_value(gp));
+}
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index a48047a..2fb521e 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -31,6 +31,7 @@ COBJS-$(CONFIG_FSL_I2C) += fsl_i2c.o
COBJS-$(CONFIG_I2C_MVTWSI) += mvtwsi.o
COBJS-$(CONFIG_I2C_MV) += mv_i2c.o
COBJS-$(CONFIG_I2C_MXC) += mxc_i2c.o
+COBJS-$(CONFIG_I2C_MXS) += mxs_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP1510_I2C) += omap1510_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP24XX_I2C) += omap24xx_i2c.o
COBJS-$(CONFIG_DRIVER_OMAP34XX_I2C) += omap24xx_i2c.o
diff --git a/drivers/i2c/mxs_i2c.c b/drivers/i2c/mxs_i2c.c
new file mode 100644
index 0000000..c8fea32
--- /dev/null
+++ b/drivers/i2c/mxs_i2c.c
@@ -0,0 +1,246 @@
+/*
+ * Freescale i.MX28 I2C Driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Partly based on Linux kernel i2c-mxs.c driver:
+ * Copyright (C) 2011 Wolfram Sang, Pengutronix e.K.
+ *
+ * Which was based on a (non-working) driver which was:
+ * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+#define MXS_I2C_MAX_TIMEOUT 1000000
+
+void mxs_i2c_reset(void)
+{
+ struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
+ int ret;
+
+ ret = mx28_reset_block(&i2c_regs->hw_i2c_ctrl0_reg);
+ if (ret) {
+ debug("MXS I2C: Block reset timeout\n");
+ return;
+ }
+
+ writel(I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ | I2C_CTRL1_NO_SLAVE_ACK_IRQ |
+ I2C_CTRL1_EARLY_TERM_IRQ | I2C_CTRL1_MASTER_LOSS_IRQ |
+ I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ,
+ &i2c_regs->hw_i2c_ctrl1_clr);
+
+ writel(I2C_QUEUECTRL_PIO_QUEUE_MODE, &i2c_regs->hw_i2c_queuectrl_set);
+}
+
+void mxs_i2c_setup_read(uint8_t chip, int len)
+{
+ struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
+
+ writel(I2C_QUEUECMD_RETAIN_CLOCK | I2C_QUEUECMD_PRE_SEND_START |
+ I2C_QUEUECMD_MASTER_MODE | I2C_QUEUECMD_DIRECTION |
+ (1 << I2C_QUEUECMD_XFER_COUNT_OFFSET),
+ &i2c_regs->hw_i2c_queuecmd);
+
+ writel((chip << 1) | 1, &i2c_regs->hw_i2c_data);
+
+ writel(I2C_QUEUECMD_SEND_NAK_ON_LAST | I2C_QUEUECMD_MASTER_MODE |
+ (len << I2C_QUEUECMD_XFER_COUNT_OFFSET) |
+ I2C_QUEUECMD_POST_SEND_STOP, &i2c_regs->hw_i2c_queuecmd);
+
+ writel(I2C_QUEUECTRL_QUEUE_RUN, &i2c_regs->hw_i2c_queuectrl_set);
+}
+
+void mxs_i2c_write(uchar chip, uint addr, int alen,
+ uchar *buf, int blen, int stop)
+{
+ struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
+ uint32_t data;
+ int i, remain, off;
+
+ if ((alen > 4) || (alen == 0)) {
+ debug("MXS I2C: Invalid address length\n");
+ return;
+ }
+
+ if (stop)
+ stop = I2C_QUEUECMD_POST_SEND_STOP;
+
+ writel(I2C_QUEUECMD_PRE_SEND_START |
+ I2C_QUEUECMD_MASTER_MODE | I2C_QUEUECMD_DIRECTION |
+ ((blen + alen + 1) << I2C_QUEUECMD_XFER_COUNT_OFFSET) | stop,
+ &i2c_regs->hw_i2c_queuecmd);
+
+ data = (chip << 1) << 24;
+
+ for (i = 0; i < alen; i++) {
+ data >>= 8;
+ data |= ((char *)&addr)[i] << 24;
+ if ((i & 3) == 2)
+ writel(data, &i2c_regs->hw_i2c_data);
+ }
+
+ off = i;
+ for (; i < off + blen; i++) {
+ data >>= 8;
+ data |= buf[i - off] << 24;
+ if ((i & 3) == 2)
+ writel(data, &i2c_regs->hw_i2c_data);
+ }
+
+ remain = 24 - ((i & 3) * 8);
+ if (remain)
+ writel(data >> remain, &i2c_regs->hw_i2c_data);
+
+ writel(I2C_QUEUECTRL_QUEUE_RUN, &i2c_regs->hw_i2c_queuectrl_set);
+}
+
+int mxs_i2c_wait_for_ack(void)
+{
+ struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
+ uint32_t tmp;
+ int timeout = MXS_I2C_MAX_TIMEOUT;
+
+ for (;;) {
+ tmp = readl(&i2c_regs->hw_i2c_ctrl1);
+ if (tmp & I2C_CTRL1_NO_SLAVE_ACK_IRQ) {
+ debug("MXS I2C: No slave ACK\n");
+ goto err;
+ }
+
+ if (tmp & (
+ I2C_CTRL1_EARLY_TERM_IRQ | I2C_CTRL1_MASTER_LOSS_IRQ |
+ I2C_CTRL1_SLAVE_STOP_IRQ | I2C_CTRL1_SLAVE_IRQ)) {
+ debug("MXS I2C: Error (CTRL1 = %08x)\n", tmp);
+ goto err;
+ }
+
+ if (tmp & I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ)
+ break;
+
+ if (!timeout--) {
+ debug("MXS I2C: Operation timed out\n");
+ goto err;
+ }
+
+ udelay(1);
+ }
+
+ return 0;
+
+err:
+ mxs_i2c_reset();
+ return 1;
+}
+
+int i2c_read(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+ struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
+ uint32_t tmp = 0;
+ int ret;
+ int i;
+
+ mxs_i2c_write(chip, addr, alen, NULL, 0, 0);
+ ret = mxs_i2c_wait_for_ack();
+ if (ret) {
+ debug("MXS I2C: Failed writing address\n");
+ return ret;
+ }
+
+ mxs_i2c_setup_read(chip, len);
+ ret = mxs_i2c_wait_for_ack();
+ if (ret) {
+ debug("MXS I2C: Failed reading address\n");
+ return ret;
+ }
+
+ for (i = 0; i < len; i++) {
+ if (!(i & 3)) {
+ while (readl(&i2c_regs->hw_i2c_queuestat) &
+ I2C_QUEUESTAT_RD_QUEUE_EMPTY)
+ ;
+ tmp = readl(&i2c_regs->hw_i2c_queuedata);
+ }
+ buffer[i] = tmp & 0xff;
+ tmp >>= 8;
+ }
+
+ return 0;
+}
+
+int i2c_write(uchar chip, uint addr, int alen, uchar *buffer, int len)
+{
+ int ret;
+ mxs_i2c_write(chip, addr, alen, buffer, len, 1);
+ ret = mxs_i2c_wait_for_ack();
+ if (ret)
+ debug("MXS I2C: Failed writing address\n");
+
+ return ret;
+}
+
+int i2c_probe(uchar chip)
+{
+ int ret;
+ mxs_i2c_write(chip, 0, 1, NULL, 0, 1);
+ ret = mxs_i2c_wait_for_ack();
+ mxs_i2c_reset();
+ return ret;
+}
+
+void i2c_init(int speed, int slaveadd)
+{
+ struct mx28_i2c_regs *i2c_regs = (struct mx28_i2c_regs *)MXS_I2C0_BASE;
+
+ mxs_i2c_reset();
+
+ switch (speed) {
+ case 100000:
+ writel((0x0078 << I2C_TIMING0_HIGH_COUNT_OFFSET) |
+ (0x0030 << I2C_TIMING0_RCV_COUNT_OFFSET),
+ &i2c_regs->hw_i2c_timing0);
+ writel((0x0080 << I2C_TIMING1_LOW_COUNT_OFFSET) |
+ (0x0030 << I2C_TIMING1_XMIT_COUNT_OFFSET),
+ &i2c_regs->hw_i2c_timing1);
+ break;
+ case 400000:
+ writel((0x000f << I2C_TIMING0_HIGH_COUNT_OFFSET) |
+ (0x0007 << I2C_TIMING0_RCV_COUNT_OFFSET),
+ &i2c_regs->hw_i2c_timing0);
+ writel((0x001f << I2C_TIMING1_LOW_COUNT_OFFSET) |
+ (0x000f << I2C_TIMING1_XMIT_COUNT_OFFSET),
+ &i2c_regs->hw_i2c_timing1);
+ break;
+ default:
+ printf("MXS I2C: Invalid speed selected (%d Hz)\n", speed);
+ return;
+ }
+
+ writel((0x0015 << I2C_TIMING2_BUS_FREE_OFFSET) |
+ (0x000d << I2C_TIMING2_LEADIN_COUNT_OFFSET),
+ &i2c_regs->hw_i2c_timing2);
+
+ return;
+}
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 9f9db75..506f1d6 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -36,6 +36,7 @@ COBJS-$(CONFIG_MMC_SPI) += mmc_spi.o
COBJS-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o
COBJS-$(CONFIG_MV_SDHCI) += mv_sdhci.o
COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o
+COBJS-$(CONFIG_MXS_MMC) += mxsmmc.o
COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o
COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
new file mode 100644
index 0000000..2a9949e
--- /dev/null
+++ b/drivers/mmc/mxsmmc.c
@@ -0,0 +1,351 @@
+/*
+ * Freescale i.MX28 SSP MMC driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * (C) Copyright 2008-2010 Freescale Semiconductor, Inc.
+ * Terry Lv
+ *
+ * Copyright 2007, Freescale Semiconductor, Inc
+ * Andy Fleming
+ *
+ * Based vaguely on the pxa mmc code:
+ * (C) Copyright 2003
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+struct mxsmmc_priv {
+ int id;
+ struct mx28_ssp_regs *regs;
+ uint32_t clkseq_bypass;
+ uint32_t *clkctrl_ssp;
+ uint32_t buswidth;
+ int (*mmc_is_wp)(int);
+};
+
+#define MXSMMC_MAX_TIMEOUT 10000
+
+/*
+ * Sends a command out on the bus. Takes the mmc pointer,
+ * a command pointer, and an optional data pointer.
+ */
+static int
+mxsmmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
+{
+ struct mxsmmc_priv *priv = (struct mxsmmc_priv *)mmc->priv;
+ struct mx28_ssp_regs *ssp_regs = priv->regs;
+ uint32_t reg;
+ int timeout;
+ uint32_t data_count;
+ uint32_t *data_ptr;
+ uint32_t ctrl0;
+
+ debug("MMC%d: CMD%d\n", mmc->block_dev.dev, cmd->cmdidx);
+
+ /* Check bus busy */
+ timeout = MXSMMC_MAX_TIMEOUT;
+ while (--timeout) {
+ udelay(1000);
+ reg = readl(&ssp_regs->hw_ssp_status);
+ if (!(reg &
+ (SSP_STATUS_BUSY | SSP_STATUS_DATA_BUSY |
+ SSP_STATUS_CMD_BUSY))) {
+ break;
+ }
+ }
+
+ if (!timeout) {
+ printf("MMC%d: Bus busy timeout!\n", mmc->block_dev.dev);
+ return TIMEOUT;
+ }
+
+ /* See if card is present */
+ if (readl(&ssp_regs->hw_ssp_status) & SSP_STATUS_CARD_DETECT) {
+ printf("MMC%d: No card detected!\n", mmc->block_dev.dev);
+ return NO_CARD_ERR;
+ }
+
+ /* Start building CTRL0 contents */
+ ctrl0 = priv->buswidth;
+
+ /* Set up command */
+ if (!(cmd->resp_type & MMC_RSP_CRC))
+ ctrl0 |= SSP_CTRL0_IGNORE_CRC;
+ if (cmd->resp_type & MMC_RSP_PRESENT) /* Need to get response */
+ ctrl0 |= SSP_CTRL0_GET_RESP;
+ if (cmd->resp_type & MMC_RSP_136) /* It's a 136 bits response */
+ ctrl0 |= SSP_CTRL0_LONG_RESP;
+
+ /* Command index */
+ reg = readl(&ssp_regs->hw_ssp_cmd0);
+ reg &= ~(SSP_CMD0_CMD_MASK | SSP_CMD0_APPEND_8CYC);
+ reg |= cmd->cmdidx << SSP_CMD0_CMD_OFFSET;
+ if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
+ reg |= SSP_CMD0_APPEND_8CYC;
+ writel(reg, &ssp_regs->hw_ssp_cmd0);
+
+ /* Command argument */
+ writel(cmd->cmdarg, &ssp_regs->hw_ssp_cmd1);
+
+ /* Set up data */
+ if (data) {
+ /* READ or WRITE */
+ if (data->flags & MMC_DATA_READ) {
+ ctrl0 |= SSP_CTRL0_READ;
+ } else if (priv->mmc_is_wp(mmc->block_dev.dev)) {
+ printf("MMC%d: Can not write a locked card!\n",
+ mmc->block_dev.dev);
+ return UNUSABLE_ERR;
+ }
+
+ ctrl0 |= SSP_CTRL0_DATA_XFER;
+ reg = ((data->blocks - 1) <<
+ SSP_BLOCK_SIZE_BLOCK_COUNT_OFFSET) |
+ ((ffs(data->blocksize) - 1) <<
+ SSP_BLOCK_SIZE_BLOCK_SIZE_OFFSET);
+ writel(reg, &ssp_regs->hw_ssp_block_size);
+
+ reg = data->blocksize * data->blocks;
+ writel(reg, &ssp_regs->hw_ssp_xfer_size);
+ }
+
+ /* Kick off the command */
+ ctrl0 |= SSP_CTRL0_WAIT_FOR_IRQ | SSP_CTRL0_ENABLE | SSP_CTRL0_RUN;
+ writel(ctrl0, &ssp_regs->hw_ssp_ctrl0);
+
+ /* Wait for the command to complete */
+ timeout = MXSMMC_MAX_TIMEOUT;
+ while (--timeout) {
+ udelay(1000);
+ reg = readl(&ssp_regs->hw_ssp_status);
+ if (!(reg & SSP_STATUS_CMD_BUSY))
+ break;
+ }
+
+ if (!timeout) {
+ printf("MMC%d: Command %d busy\n",
+ mmc->block_dev.dev, cmd->cmdidx);
+ return TIMEOUT;
+ }
+
+ /* Check command timeout */
+ if (reg & SSP_STATUS_RESP_TIMEOUT) {
+ printf("MMC%d: Command %d timeout (status 0x%08x)\n",
+ mmc->block_dev.dev, cmd->cmdidx, reg);
+ return TIMEOUT;
+ }
+
+ /* Check command errors */
+ if (reg & (SSP_STATUS_RESP_CRC_ERR | SSP_STATUS_RESP_ERR)) {
+ printf("MMC%d: Command %d error (status 0x%08x)!\n",
+ mmc->block_dev.dev, cmd->cmdidx, reg);
+ return COMM_ERR;
+ }
+
+ /* Copy response to response buffer */
+ if (cmd->resp_type & MMC_RSP_136) {
+ cmd->response[3] = readl(&ssp_regs->hw_ssp_sdresp0);
+ cmd->response[2] = readl(&ssp_regs->hw_ssp_sdresp1);
+ cmd->response[1] = readl(&ssp_regs->hw_ssp_sdresp2);
+ cmd->response[0] = readl(&ssp_regs->hw_ssp_sdresp3);
+ } else
+ cmd->response[0] = readl(&ssp_regs->hw_ssp_sdresp0);
+
+ /* Return if no data to process */
+ if (!data)
+ return 0;
+
+ /* Process the data */
+ data_count = data->blocksize * data->blocks;
+ timeout = MXSMMC_MAX_TIMEOUT;
+ if (data->flags & MMC_DATA_READ) {
+ data_ptr = (uint32_t *)data->dest;
+ while (data_count && --timeout) {
+ reg = readl(&ssp_regs->hw_ssp_status);
+ if (!(reg & SSP_STATUS_FIFO_EMPTY)) {
+ *data_ptr++ = readl(&ssp_regs->hw_ssp_data);
+ data_count -= 4;
+ timeout = MXSMMC_MAX_TIMEOUT;
+ } else
+ udelay(1000);
+ }
+ } else {
+ data_ptr = (uint32_t *)data->src;
+ timeout *= 100;
+ while (data_count && --timeout) {
+ reg = readl(&ssp_regs->hw_ssp_status);
+ if (!(reg & SSP_STATUS_FIFO_FULL)) {
+ writel(*data_ptr++, &ssp_regs->hw_ssp_data);
+ data_count -= 4;
+ timeout = MXSMMC_MAX_TIMEOUT;
+ } else
+ udelay(1000);
+ }
+ }
+
+ if (!timeout) {
+ printf("MMC%d: Data timeout with command %d (status 0x%08x)!\n",
+ mmc->block_dev.dev, cmd->cmdidx, reg);
+ return COMM_ERR;
+ }
+
+ /* Check data errors */
+ reg = readl(&ssp_regs->hw_ssp_status);
+ if (reg &
+ (SSP_STATUS_TIMEOUT | SSP_STATUS_DATA_CRC_ERR |
+ SSP_STATUS_FIFO_OVRFLW | SSP_STATUS_FIFO_UNDRFLW)) {
+ printf("MMC%d: Data error with command %d (status 0x%08x)!\n",
+ mmc->block_dev.dev, cmd->cmdidx, reg);
+ return COMM_ERR;
+ }
+
+ return 0;
+}
+
+static void mxsmmc_set_ios(struct mmc *mmc)
+{
+ struct mxsmmc_priv *priv = (struct mxsmmc_priv *)mmc->priv;
+ struct mx28_ssp_regs *ssp_regs = priv->regs;
+
+ /* Set the clock speed */
+ if (mmc->clock)
+ mx28_set_ssp_busclock(priv->id, mmc->clock / 1000);
+
+ switch (mmc->bus_width) {
+ case 1:
+ priv->buswidth = SSP_CTRL0_BUS_WIDTH_ONE_BIT;
+ break;
+ case 4:
+ priv->buswidth = SSP_CTRL0_BUS_WIDTH_FOUR_BIT;
+ break;
+ case 8:
+ priv->buswidth = SSP_CTRL0_BUS_WIDTH_EIGHT_BIT;
+ break;
+ }
+
+ /* Set the bus width */
+ clrsetbits_le32(&ssp_regs->hw_ssp_ctrl0,
+ SSP_CTRL0_BUS_WIDTH_MASK, priv->buswidth);
+
+ debug("MMC%d: Set %d bits bus width\n",
+ mmc->block_dev.dev, mmc->bus_width);
+}
+
+static int mxsmmc_init(struct mmc *mmc)
+{
+ struct mxsmmc_priv *priv = (struct mxsmmc_priv *)mmc->priv;
+ struct mx28_ssp_regs *ssp_regs = priv->regs;
+
+ /* Reset SSP */
+ mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
+
+ /* 8 bits word length in MMC mode */
+ clrsetbits_le32(&ssp_regs->hw_ssp_ctrl1,
+ SSP_CTRL1_SSP_MODE_MASK | SSP_CTRL1_WORD_LENGTH_MASK,
+ SSP_CTRL1_SSP_MODE_SD_MMC | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS);
+
+ /* Set initial bit clock 400 KHz */
+ mx28_set_ssp_busclock(priv->id, 400);
+
+ /* Send initial 74 clock cycles (185 us @ 400 KHz)*/
+ writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_set);
+ udelay(200);
+ writel(SSP_CMD0_CONT_CLKING_EN, &ssp_regs->hw_ssp_cmd0_clr);
+
+ return 0;
+}
+
+int mxsmmc_initialize(bd_t *bis, int id, int (*wp)(int))
+{
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+ struct mmc *mmc = NULL;
+ struct mxsmmc_priv *priv = NULL;
+
+ mmc = malloc(sizeof(struct mmc));
+ if (!mmc)
+ return -ENOMEM;
+
+ priv = malloc(sizeof(struct mxsmmc_priv));
+ if (!priv) {
+ free(mmc);
+ return -ENOMEM;
+ }
+
+ priv->mmc_is_wp = wp;
+ priv->id = id;
+ switch (id) {
+ case 0:
+ priv->regs = (struct mx28_ssp_regs *)MXS_SSP0_BASE;
+ priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP0;
+ priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp0;
+ break;
+ case 1:
+ priv->regs = (struct mx28_ssp_regs *)MXS_SSP1_BASE;
+ priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP1;
+ priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp1;
+ break;
+ case 2:
+ priv->regs = (struct mx28_ssp_regs *)MXS_SSP2_BASE;
+ priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP2;
+ priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp2;
+ break;
+ case 3:
+ priv->regs = (struct mx28_ssp_regs *)MXS_SSP3_BASE;
+ priv->clkseq_bypass = CLKCTRL_CLKSEQ_BYPASS_SSP3;
+ priv->clkctrl_ssp = &clkctrl_regs->hw_clkctrl_ssp3;
+ break;
+ }
+
+ sprintf(mmc->name, "MXS MMC");
+ mmc->send_cmd = mxsmmc_send_cmd;
+ mmc->set_ios = mxsmmc_set_ios;
+ mmc->init = mxsmmc_init;
+ mmc->priv = priv;
+
+ mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ mmc->host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT |
+ MMC_MODE_HS_52MHz | MMC_MODE_HS;
+
+ /*
+ * SSPCLK = 480 * 18 / 29 / 1 = 297.731 MHz
+ * SSP bit rate = SSPCLK / (CLOCK_DIVIDE * (1 + CLOCK_RATE)),
+ * CLOCK_DIVIDE has to be an even value from 2 to 254, and
+ * CLOCK_RATE could be any integer from 0 to 255.
+ */
+ mmc->f_min = 400000;
+ mmc->f_max = mxc_get_clock(MXC_SSP0_CLK + id) * 1000 / 2;
+ mmc->b_max = 0;
+
+ mmc_register(mmc);
+ return 0;
+}
diff --git a/drivers/mmc/omap_hsmmc.c b/drivers/mmc/omap_hsmmc.c
index ebda980..c38b9e6 100644
--- a/drivers/mmc/omap_hsmmc.c
+++ b/drivers/mmc/omap_hsmmc.c
@@ -36,8 +36,9 @@
/* If we fail after 1 second wait, something is really bad */
#define MAX_RETRY_MS 1000
-static int mmc_read_data(hsmmc_t *mmc_base, char *buf, unsigned int size);
-static int mmc_write_data(hsmmc_t *mmc_base, const char *buf, unsigned int siz);
+static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size);
+static int mmc_write_data(struct hsmmc *mmc_base, const char *buf,
+ unsigned int siz);
static struct mmc hsmmc_dev[2];
#if defined(CONFIG_OMAP44XX) && defined(CONFIG_TWL6030_POWER)
@@ -97,7 +98,7 @@ unsigned char mmc_board_init(struct mmc *mmc)
return 0;
}
-void mmc_init_stream(hsmmc_t *mmc_base)
+void mmc_init_stream(struct hsmmc *mmc_base)
{
ulong start;
@@ -128,7 +129,7 @@ void mmc_init_stream(hsmmc_t *mmc_base)
static int mmc_init_setup(struct mmc *mmc)
{
- hsmmc_t *mmc_base = (hsmmc_t *)mmc->priv;
+ struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv;
unsigned int reg_val;
unsigned int dsor;
ulong start;
@@ -192,7 +193,7 @@ static int mmc_init_setup(struct mmc *mmc)
static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
struct mmc_data *data)
{
- hsmmc_t *mmc_base = (hsmmc_t *)mmc->priv;
+ struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv;
unsigned int flags, mmc_stat;
ulong start;
@@ -305,7 +306,7 @@ static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
return 0;
}
-static int mmc_read_data(hsmmc_t *mmc_base, char *buf, unsigned int size)
+static int mmc_read_data(struct hsmmc *mmc_base, char *buf, unsigned int size)
{
unsigned int *output_buf = (unsigned int *)buf;
unsigned int mmc_stat;
@@ -356,7 +357,8 @@ static int mmc_read_data(hsmmc_t *mmc_base, char *buf, unsigned int size)
return 0;
}
-static int mmc_write_data(hsmmc_t *mmc_base, const char *buf, unsigned int size)
+static int mmc_write_data(struct hsmmc *mmc_base, const char *buf,
+ unsigned int size)
{
unsigned int *input_buf = (unsigned int *)buf;
unsigned int mmc_stat;
@@ -409,7 +411,7 @@ static int mmc_write_data(hsmmc_t *mmc_base, const char *buf, unsigned int size)
static void mmc_set_ios(struct mmc *mmc)
{
- hsmmc_t *mmc_base = (hsmmc_t *)mmc->priv;
+ struct hsmmc *mmc_base = (struct hsmmc *)mmc->priv;
unsigned int dsor = 0;
ulong start;
@@ -473,20 +475,20 @@ int omap_mmc_init(int dev_index)
switch (dev_index) {
case 0:
- mmc->priv = (hsmmc_t *)OMAP_HSMMC1_BASE;
+ mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE;
break;
#ifdef OMAP_HSMMC2_BASE
case 1:
- mmc->priv = (hsmmc_t *)OMAP_HSMMC2_BASE;
+ mmc->priv = (struct hsmmc *)OMAP_HSMMC2_BASE;
break;
#endif
#ifdef OMAP_HSMMC3_BASE
case 2:
- mmc->priv = (hsmmc_t *)OMAP_HSMMC3_BASE;
+ mmc->priv = (struct hsmmc *)OMAP_HSMMC3_BASE;
break;
#endif
default:
- mmc->priv = (hsmmc_t *)OMAP_HSMMC1_BASE;
+ mmc->priv = (struct hsmmc *)OMAP_HSMMC1_BASE;
return 1;
}
mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 28bd350..36ee454 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -54,6 +54,7 @@ COBJS-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
COBJS-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
COBJS-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o
COBJS-$(CONFIG_NAND_MXC) += mxc_nand.o
+COBJS-$(CONFIG_NAND_MXS) += mxs_nand.o
COBJS-$(CONFIG_NAND_NDFC) += ndfc.o
COBJS-$(CONFIG_NAND_NOMADIK) += nomadik.o
COBJS-$(CONFIG_NAND_S3C2410) += s3c2410_nand.o
diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
new file mode 100644
index 0000000..ce2a326
--- /dev/null
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -0,0 +1,1118 @@
+/*
+ * Freescale i.MX28 NAND flash driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * Based on code from LTIB:
+ * Freescale GPMI NFC NAND Flash Driver
+ *
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/types.h>
+#include <common.h>
+#include <malloc.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/dma.h>
+
+#define MXS_NAND_DMA_DESCRIPTOR_COUNT 4
+
+#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE 512
+#define MXS_NAND_METADATA_SIZE 10
+
+#define MXS_NAND_COMMAND_BUFFER_SIZE 32
+
+#define MXS_NAND_BCH_TIMEOUT 10000
+
+struct mxs_nand_info {
+ int cur_chip;
+
+ uint32_t cmd_queue_len;
+
+ uint8_t *cmd_buf;
+ uint8_t *data_buf;
+ uint8_t *oob_buf;
+
+ uint8_t marking_block_bad;
+ uint8_t raw_oob_mode;
+
+ /* Functions with altered behaviour */
+ int (*hooked_read_oob)(struct mtd_info *mtd,
+ loff_t from, struct mtd_oob_ops *ops);
+ int (*hooked_write_oob)(struct mtd_info *mtd,
+ loff_t to, struct mtd_oob_ops *ops);
+ int (*hooked_block_markbad)(struct mtd_info *mtd,
+ loff_t ofs);
+
+ /* DMA descriptors */
+ struct mxs_dma_desc **desc;
+ uint32_t desc_index;
+};
+
+struct nand_ecclayout fake_ecc_layout;
+
+static struct mxs_dma_desc *mxs_nand_get_dma_desc(struct mxs_nand_info *info)
+{
+ struct mxs_dma_desc *desc;
+
+ if (info->desc_index >= MXS_NAND_DMA_DESCRIPTOR_COUNT) {
+ printf("MXS NAND: Too many DMA descriptors requested\n");
+ return NULL;
+ }
+
+ desc = info->desc[info->desc_index];
+ info->desc_index++;
+
+ return desc;
+}
+
+static void mxs_nand_return_dma_descs(struct mxs_nand_info *info)
+{
+ int i;
+ struct mxs_dma_desc *desc;
+
+ for (i = 0; i < info->desc_index; i++) {
+ desc = info->desc[i];
+ memset(desc, 0, sizeof(struct mxs_dma_desc));
+ desc->address = (dma_addr_t)desc;
+ }
+
+ info->desc_index = 0;
+}
+
+static uint32_t mxs_nand_ecc_chunk_cnt(uint32_t page_data_size)
+{
+ return page_data_size / MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+}
+
+static uint32_t mxs_nand_ecc_size_in_bits(uint32_t ecc_strength)
+{
+ return ecc_strength * 13;
+}
+
+static uint32_t mxs_nand_aux_status_offset(void)
+{
+ return (MXS_NAND_METADATA_SIZE + 0x3) & ~0x3;
+}
+
+static inline uint32_t mxs_nand_get_ecc_strength(uint32_t page_data_size,
+ uint32_t page_oob_size)
+{
+ if (page_data_size == 2048)
+ return 8;
+
+ if (page_data_size == 4096) {
+ if (page_oob_size == 128)
+ return 8;
+
+ if (page_oob_size == 218)
+ return 16;
+ }
+
+ return 0;
+}
+
+static inline uint32_t mxs_nand_get_mark_offset(uint32_t page_data_size,
+ uint32_t ecc_strength)
+{
+ uint32_t chunk_data_size_in_bits;
+ uint32_t chunk_ecc_size_in_bits;
+ uint32_t chunk_total_size_in_bits;
+ uint32_t block_mark_chunk_number;
+ uint32_t block_mark_chunk_bit_offset;
+ uint32_t block_mark_bit_offset;
+
+ chunk_data_size_in_bits = MXS_NAND_CHUNK_DATA_CHUNK_SIZE * 8;
+ chunk_ecc_size_in_bits = mxs_nand_ecc_size_in_bits(ecc_strength);
+
+ chunk_total_size_in_bits =
+ chunk_data_size_in_bits + chunk_ecc_size_in_bits;
+
+ /* Compute the bit offset of the block mark within the physical page. */
+ block_mark_bit_offset = page_data_size * 8;
+
+ /* Subtract the metadata bits. */
+ block_mark_bit_offset -= MXS_NAND_METADATA_SIZE * 8;
+
+ /*
+ * Compute the chunk number (starting at zero) in which the block mark
+ * appears.
+ */
+ block_mark_chunk_number =
+ block_mark_bit_offset / chunk_total_size_in_bits;
+
+ /*
+ * Compute the bit offset of the block mark within its chunk, and
+ * validate it.
+ */
+ block_mark_chunk_bit_offset = block_mark_bit_offset -
+ (block_mark_chunk_number * chunk_total_size_in_bits);
+
+ if (block_mark_chunk_bit_offset > chunk_data_size_in_bits)
+ return 1;
+
+ /*
+ * Now that we know the chunk number in which the block mark appears,
+ * we can subtract all the ECC bits that appear before it.
+ */
+ block_mark_bit_offset -=
+ block_mark_chunk_number * chunk_ecc_size_in_bits;
+
+ return block_mark_bit_offset;
+}
+
+static uint32_t mxs_nand_mark_byte_offset(struct mtd_info *mtd)
+{
+ uint32_t ecc_strength;
+ ecc_strength = mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize);
+ return mxs_nand_get_mark_offset(mtd->writesize, ecc_strength) >> 3;
+}
+
+static uint32_t mxs_nand_mark_bit_offset(struct mtd_info *mtd)
+{
+ uint32_t ecc_strength;
+ ecc_strength = mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize);
+ return mxs_nand_get_mark_offset(mtd->writesize, ecc_strength) & 0x7;
+}
+
+/*
+ * Wait for BCH complete IRQ and clear the IRQ
+ */
+static int mxs_nand_wait_for_bch_complete(void)
+{
+ struct mx28_bch_regs *bch_regs = (struct mx28_bch_regs *)MXS_BCH_BASE;
+ int timeout = MXS_NAND_BCH_TIMEOUT;
+ int ret;
+
+ ret = mx28_wait_mask_set(&bch_regs->hw_bch_ctrl_reg,
+ BCH_CTRL_COMPLETE_IRQ, timeout);
+
+ writel(BCH_CTRL_COMPLETE_IRQ, &bch_regs->hw_bch_ctrl_clr);
+
+ return ret;
+}
+
+/*
+ * This is the function that we install in the cmd_ctrl function pointer of the
+ * owning struct nand_chip. The only functions in the reference implementation
+ * that use these functions pointers are cmdfunc and select_chip.
+ *
+ * In this driver, we implement our own select_chip, so this function will only
+ * be called by the reference implementation's cmdfunc. For this reason, we can
+ * ignore the chip enable bit and concentrate only on sending bytes to the NAND
+ * Flash.
+ */
+static void mxs_nand_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mxs_nand_info *nand_info = nand->priv;
+ struct mxs_dma_desc *d;
+ uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
+ int ret;
+
+ /*
+ * If this condition is true, something is _VERY_ wrong in MTD
+ * subsystem!
+ */
+ if (nand_info->cmd_queue_len == MXS_NAND_COMMAND_BUFFER_SIZE) {
+ printf("MXS NAND: Command queue too long\n");
+ return;
+ }
+
+ /*
+ * Every operation begins with a command byte and a series of zero or
+ * more address bytes. These are distinguished by either the Address
+ * Latch Enable (ALE) or Command Latch Enable (CLE) signals being
+ * asserted. When MTD is ready to execute the command, it will
+ * deasert both latch enables.
+ *
+ * Rather than run a separate DMA operation for every single byte, we
+ * queue them up and run a single DMA operation for the entire series
+ * of command and data bytes.
+ */
+ if (ctrl & (NAND_ALE | NAND_CLE)) {
+ if (data != NAND_CMD_NONE)
+ nand_info->cmd_buf[nand_info->cmd_queue_len++] = data;
+ return;
+ }
+
+ /*
+ * If control arrives here, MTD has deasserted both the ALE and CLE,
+ * which means it's ready to run an operation. Check if we have any
+ * bytes to send.
+ */
+ if (nand_info->cmd_queue_len == 0)
+ return;
+
+ /* Compile the DMA descriptor -- a descriptor that sends command. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ |
+ MXS_DMA_DESC_CHAIN | MXS_DMA_DESC_DEC_SEM |
+ MXS_DMA_DESC_WAIT4END | (3 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+ (nand_info->cmd_queue_len << MXS_DMA_DESC_BYTES_OFFSET);
+
+ d->cmd.address = (dma_addr_t)nand_info->cmd_buf;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_WRITE |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_CLE |
+ GPMI_CTRL0_ADDRESS_INCREMENT |
+ nand_info->cmd_queue_len;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Execute the DMA chain. */
+ ret = mxs_dma_go(channel);
+ if (ret)
+ printf("MXS NAND: Error sending command\n");
+
+ mxs_nand_return_dma_descs(nand_info);
+
+ /* Reset the command queue. */
+ nand_info->cmd_queue_len = 0;
+}
+
+/*
+ * Test if the NAND flash is ready.
+ */
+static int mxs_nand_device_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mxs_nand_info *nand_info = chip->priv;
+ struct mx28_gpmi_regs *gpmi_regs =
+ (struct mx28_gpmi_regs *)MXS_GPMI_BASE;
+ uint32_t tmp;
+
+ tmp = readl(&gpmi_regs->hw_gpmi_stat);
+ tmp >>= (GPMI_STAT_READY_BUSY_OFFSET + nand_info->cur_chip);
+
+ return tmp & 1;
+}
+
+/*
+ * Select the NAND chip.
+ */
+static void mxs_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mxs_nand_info *nand_info = nand->priv;
+
+ nand_info->cur_chip = chip;
+}
+
+/*
+ * Handle block mark swapping.
+ *
+ * Note that, when this function is called, it doesn't know whether it's
+ * swapping the block mark, or swapping it *back* -- but it doesn't matter
+ * because the the operation is the same.
+ */
+static void mxs_nand_swap_block_mark(struct mtd_info *mtd,
+ uint8_t *data_buf, uint8_t *oob_buf)
+{
+ uint32_t bit_offset;
+ uint32_t buf_offset;
+
+ uint32_t src;
+ uint32_t dst;
+
+ bit_offset = mxs_nand_mark_bit_offset(mtd);
+ buf_offset = mxs_nand_mark_byte_offset(mtd);
+
+ /*
+ * Get the byte from the data area that overlays the block mark. Since
+ * the ECC engine applies its own view to the bits in the page, the
+ * physical block mark won't (in general) appear on a byte boundary in
+ * the data.
+ */
+ src = data_buf[buf_offset] >> bit_offset;
+ src |= data_buf[buf_offset + 1] << (8 - bit_offset);
+
+ dst = oob_buf[0];
+
+ oob_buf[0] = src;
+
+ data_buf[buf_offset] &= ~(0xff << bit_offset);
+ data_buf[buf_offset + 1] &= 0xff << bit_offset;
+
+ data_buf[buf_offset] |= dst << bit_offset;
+ data_buf[buf_offset + 1] |= dst >> (8 - bit_offset);
+}
+
+/*
+ * Read data from NAND.
+ */
+static void mxs_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int length)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mxs_nand_info *nand_info = nand->priv;
+ struct mxs_dma_desc *d;
+ uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
+ int ret;
+
+ if (length > NAND_MAX_PAGESIZE) {
+ printf("MXS NAND: DMA buffer too big\n");
+ return;
+ }
+
+ if (!buf) {
+ printf("MXS NAND: DMA buffer is NULL\n");
+ return;
+ }
+
+ /* Compile the DMA descriptor - a descriptor that reads data. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_DMA_WRITE | MXS_DMA_DESC_IRQ |
+ MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END |
+ (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+ (length << MXS_DMA_DESC_BYTES_OFFSET);
+
+ d->cmd.address = (dma_addr_t)nand_info->data_buf;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_READ |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_DATA |
+ length;
+
+ mxs_dma_desc_append(channel, d);
+
+ /*
+ * A DMA descriptor that waits for the command to end and the chip to
+ * become ready.
+ *
+ * I think we actually should *not* be waiting for the chip to become
+ * ready because, after all, we don't care. I think the original code
+ * did that and no one has re-thought it yet.
+ */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ |
+ MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_DEC_SEM |
+ MXS_DMA_DESC_WAIT4END | (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+
+ d->cmd.address = 0;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_DATA;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Execute the DMA chain. */
+ ret = mxs_dma_go(channel);
+ if (ret) {
+ printf("MXS NAND: DMA read error\n");
+ goto rtn;
+ }
+
+ memcpy(buf, nand_info->data_buf, length);
+
+rtn:
+ mxs_nand_return_dma_descs(nand_info);
+}
+
+/*
+ * Write data to NAND.
+ */
+static void mxs_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf,
+ int length)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mxs_nand_info *nand_info = nand->priv;
+ struct mxs_dma_desc *d;
+ uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
+ int ret;
+
+ if (length > NAND_MAX_PAGESIZE) {
+ printf("MXS NAND: DMA buffer too big\n");
+ return;
+ }
+
+ if (!buf) {
+ printf("MXS NAND: DMA buffer is NULL\n");
+ return;
+ }
+
+ memcpy(nand_info->data_buf, buf, length);
+
+ /* Compile the DMA descriptor - a descriptor that writes data. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ |
+ MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END |
+ (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) |
+ (length << MXS_DMA_DESC_BYTES_OFFSET);
+
+ d->cmd.address = (dma_addr_t)nand_info->data_buf;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_WRITE |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_DATA |
+ length;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Execute the DMA chain. */
+ ret = mxs_dma_go(channel);
+ if (ret)
+ printf("MXS NAND: DMA write error\n");
+
+ mxs_nand_return_dma_descs(nand_info);
+}
+
+/*
+ * Read a single byte from NAND.
+ */
+static uint8_t mxs_nand_read_byte(struct mtd_info *mtd)
+{
+ uint8_t buf;
+ mxs_nand_read_buf(mtd, &buf, 1);
+ return buf;
+}
+
+/*
+ * Read a page from NAND.
+ */
+static int mxs_nand_ecc_read_page(struct mtd_info *mtd, struct nand_chip *nand,
+ uint8_t *buf, int page)
+{
+ struct mxs_nand_info *nand_info = nand->priv;
+ struct mxs_dma_desc *d;
+ uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
+ uint32_t corrected = 0, failed = 0;
+ uint8_t *status;
+ int i, ret;
+
+ /* Compile the DMA descriptor - wait for ready. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN |
+ MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_WAIT4END |
+ (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+
+ d->cmd.address = 0;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_DATA;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Compile the DMA descriptor - enable the BCH block and read. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN |
+ MXS_DMA_DESC_WAIT4END | (6 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+
+ d->cmd.address = 0;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_READ |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_DATA |
+ (mtd->writesize + mtd->oobsize);
+ d->cmd.pio_words[1] = 0;
+ d->cmd.pio_words[2] =
+ GPMI_ECCCTRL_ENABLE_ECC |
+ GPMI_ECCCTRL_ECC_CMD_DECODE |
+ GPMI_ECCCTRL_BUFFER_MASK_BCH_PAGE;
+ d->cmd.pio_words[3] = mtd->writesize + mtd->oobsize;
+ d->cmd.pio_words[4] = (dma_addr_t)nand_info->data_buf;
+ d->cmd.pio_words[5] = (dma_addr_t)nand_info->oob_buf;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Compile the DMA descriptor - disable the BCH block. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_CHAIN |
+ MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_WAIT4END |
+ (3 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+
+ d->cmd.address = 0;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_WAIT_FOR_READY |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_DATA |
+ (mtd->writesize + mtd->oobsize);
+ d->cmd.pio_words[1] = 0;
+ d->cmd.pio_words[2] = 0;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Compile the DMA descriptor - deassert the NAND lock and interrupt. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ |
+ MXS_DMA_DESC_DEC_SEM;
+
+ d->cmd.address = 0;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Execute the DMA chain. */
+ ret = mxs_dma_go(channel);
+ if (ret) {
+ printf("MXS NAND: DMA read error\n");
+ goto rtn;
+ }
+
+ ret = mxs_nand_wait_for_bch_complete();
+ if (ret) {
+ printf("MXS NAND: BCH read timeout\n");
+ goto rtn;
+ }
+
+ /* Read DMA completed, now do the mark swapping. */
+ mxs_nand_swap_block_mark(mtd, nand_info->data_buf, nand_info->oob_buf);
+
+ /* Loop over status bytes, accumulating ECC status. */
+ status = nand_info->oob_buf + mxs_nand_aux_status_offset();
+ for (i = 0; i < mxs_nand_ecc_chunk_cnt(mtd->writesize); i++) {
+ if (status[i] == 0x00)
+ continue;
+
+ if (status[i] == 0xff)
+ continue;
+
+ if (status[i] == 0xfe) {
+ failed++;
+ continue;
+ }
+
+ corrected += status[i];
+ }
+
+ /* Propagate ECC status to the owning MTD. */
+ mtd->ecc_stats.failed += failed;
+ mtd->ecc_stats.corrected += corrected;
+
+ /*
+ * It's time to deliver the OOB bytes. See mxs_nand_ecc_read_oob() for
+ * details about our policy for delivering the OOB.
+ *
+ * We fill the caller's buffer with set bits, and then copy the block
+ * mark to the caller's buffer. Note that, if block mark swapping was
+ * necessary, it has already been done, so we can rely on the first
+ * byte of the auxiliary buffer to contain the block mark.
+ */
+ memset(nand->oob_poi, 0xff, mtd->oobsize);
+
+ nand->oob_poi[0] = nand_info->oob_buf[0];
+
+ memcpy(buf, nand_info->data_buf, mtd->writesize);
+
+rtn:
+ mxs_nand_return_dma_descs(nand_info);
+
+ return ret;
+}
+
+/*
+ * Write a page to NAND.
+ */
+static void mxs_nand_ecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *nand, const uint8_t *buf)
+{
+ struct mxs_nand_info *nand_info = nand->priv;
+ struct mxs_dma_desc *d;
+ uint32_t channel = MXS_DMA_CHANNEL_AHB_APBH_GPMI0 + nand_info->cur_chip;
+ int ret;
+
+ memcpy(nand_info->data_buf, buf, mtd->writesize);
+ memcpy(nand_info->oob_buf, nand->oob_poi, mtd->oobsize);
+
+ /* Handle block mark swapping. */
+ mxs_nand_swap_block_mark(mtd, nand_info->data_buf, nand_info->oob_buf);
+
+ /* Compile the DMA descriptor - write data. */
+ d = mxs_nand_get_dma_desc(nand_info);
+ d->cmd.data =
+ MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ |
+ MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END |
+ (6 << MXS_DMA_DESC_PIO_WORDS_OFFSET);
+
+ d->cmd.address = 0;
+
+ d->cmd.pio_words[0] =
+ GPMI_CTRL0_COMMAND_MODE_WRITE |
+ GPMI_CTRL0_WORD_LENGTH |
+ (nand_info->cur_chip << GPMI_CTRL0_CS_OFFSET) |
+ GPMI_CTRL0_ADDRESS_NAND_DATA;
+ d->cmd.pio_words[1] = 0;
+ d->cmd.pio_words[2] =
+ GPMI_ECCCTRL_ENABLE_ECC |
+ GPMI_ECCCTRL_ECC_CMD_ENCODE |
+ GPMI_ECCCTRL_BUFFER_MASK_BCH_PAGE;
+ d->cmd.pio_words[3] = (mtd->writesize + mtd->oobsize);
+ d->cmd.pio_words[4] = (dma_addr_t)nand_info->data_buf;
+ d->cmd.pio_words[5] = (dma_addr_t)nand_info->oob_buf;
+
+ mxs_dma_desc_append(channel, d);
+
+ /* Execute the DMA chain. */
+ ret = mxs_dma_go(channel);
+ if (ret) {
+ printf("MXS NAND: DMA write error\n");
+ goto rtn;
+ }
+
+ ret = mxs_nand_wait_for_bch_complete();
+ if (ret) {
+ printf("MXS NAND: BCH write timeout\n");
+ goto rtn;
+ }
+
+rtn:
+ mxs_nand_return_dma_descs(nand_info);
+}
+
+/*
+ * Read OOB from NAND.
+ *
+ * This function is a veneer that replaces the function originally installed by
+ * the NAND Flash MTD code.
+ */
+static int mxs_nand_hook_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mxs_nand_info *nand_info = chip->priv;
+ int ret;
+
+ if (ops->mode == MTD_OOB_RAW)
+ nand_info->raw_oob_mode = 1;
+ else
+ nand_info->raw_oob_mode = 0;
+
+ ret = nand_info->hooked_read_oob(mtd, from, ops);
+
+ nand_info->raw_oob_mode = 0;
+
+ return ret;
+}
+
+/*
+ * Write OOB to NAND.
+ *
+ * This function is a veneer that replaces the function originally installed by
+ * the NAND Flash MTD code.
+ */
+static int mxs_nand_hook_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mxs_nand_info *nand_info = chip->priv;
+ int ret;
+
+ if (ops->mode == MTD_OOB_RAW)
+ nand_info->raw_oob_mode = 1;
+ else
+ nand_info->raw_oob_mode = 0;
+
+ ret = nand_info->hooked_write_oob(mtd, to, ops);
+
+ nand_info->raw_oob_mode = 0;
+
+ return ret;
+}
+
+/*
+ * Mark a block bad in NAND.
+ *
+ * This function is a veneer that replaces the function originally installed by
+ * the NAND Flash MTD code.
+ */
+static int mxs_nand_hook_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mxs_nand_info *nand_info = chip->priv;
+ int ret;
+
+ nand_info->marking_block_bad = 1;
+
+ ret = nand_info->hooked_block_markbad(mtd, ofs);
+
+ nand_info->marking_block_bad = 0;
+
+ return ret;
+}
+
+/*
+ * There are several places in this driver where we have to handle the OOB and
+ * block marks. This is the function where things are the most complicated, so
+ * this is where we try to explain it all. All the other places refer back to
+ * here.
+ *
+ * These are the rules, in order of decreasing importance:
+ *
+ * 1) Nothing the caller does can be allowed to imperil the block mark, so all
+ * write operations take measures to protect it.
+ *
+ * 2) In read operations, the first byte of the OOB we return must reflect the
+ * true state of the block mark, no matter where that block mark appears in
+ * the physical page.
+ *
+ * 3) ECC-based read operations return an OOB full of set bits (since we never
+ * allow ECC-based writes to the OOB, it doesn't matter what ECC-based reads
+ * return).
+ *
+ * 4) "Raw" read operations return a direct view of the physical bytes in the
+ * page, using the conventional definition of which bytes are data and which
+ * are OOB. This gives the caller a way to see the actual, physical bytes
+ * in the page, without the distortions applied by our ECC engine.
+ *
+ * What we do for this specific read operation depends on whether we're doing
+ * "raw" read, or an ECC-based read.
+ *
+ * It turns out that knowing whether we want an "ECC-based" or "raw" read is not
+ * easy. When reading a page, for example, the NAND Flash MTD code calls our
+ * ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an
+ * ECC-based or raw view of the page is implicit in which function it calls
+ * (there is a similar pair of ECC-based/raw functions for writing).
+ *
+ * Since MTD assumes the OOB is not covered by ECC, there is no pair of
+ * ECC-based/raw functions for reading or or writing the OOB. The fact that the
+ * caller wants an ECC-based or raw view of the page is not propagated down to
+ * this driver.
+ *
+ * Since our OOB *is* covered by ECC, we need this information. So, we hook the
+ * ecc.read_oob and ecc.write_oob function pointers in the owning
+ * struct mtd_info with our own functions. These hook functions set the
+ * raw_oob_mode field so that, when control finally arrives here, we'll know
+ * what to do.
+ */
+static int mxs_nand_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *nand,
+ int page, int cmd)
+{
+ struct mxs_nand_info *nand_info = nand->priv;
+
+ /*
+ * First, fill in the OOB buffer. If we're doing a raw read, we need to
+ * get the bytes from the physical page. If we're not doing a raw read,
+ * we need to fill the buffer with set bits.
+ */
+ if (nand_info->raw_oob_mode) {
+ /*
+ * If control arrives here, we're doing a "raw" read. Send the
+ * command to read the conventional OOB and read it.
+ */
+ nand->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+ nand->read_buf(mtd, nand->oob_poi, mtd->oobsize);
+ } else {
+ /*
+ * If control arrives here, we're not doing a "raw" read. Fill
+ * the OOB buffer with set bits and correct the block mark.
+ */
+ memset(nand->oob_poi, 0xff, mtd->oobsize);
+
+ nand->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+ mxs_nand_read_buf(mtd, nand->oob_poi, 1);
+ }
+
+ return 0;
+
+}
+
+/*
+ * Write OOB data to NAND.
+ */
+static int mxs_nand_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *nand,
+ int page)
+{
+ struct mxs_nand_info *nand_info = nand->priv;
+ uint8_t block_mark = 0;
+
+ /*
+ * There are fundamental incompatibilities between the i.MX GPMI NFC and
+ * the NAND Flash MTD model that make it essentially impossible to write
+ * the out-of-band bytes.
+ *
+ * We permit *ONE* exception. If the *intent* of writing the OOB is to
+ * mark a block bad, we can do that.
+ */
+
+ if (!nand_info->marking_block_bad) {
+ printf("NXS NAND: Writing OOB isn't supported\n");
+ return -EIO;
+ }
+
+ /* Write the block mark. */
+ nand->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+ nand->write_buf(mtd, &block_mark, 1);
+ nand->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ /* Check if it worked. */
+ if (nand->waitfunc(mtd, nand) & NAND_STATUS_FAIL)
+ return -EIO;
+
+ return 0;
+}
+
+/*
+ * Claims all blocks are good.
+ *
+ * In principle, this function is *only* called when the NAND Flash MTD system
+ * isn't allowed to keep an in-memory bad block table, so it is forced to ask
+ * the driver for bad block information.
+ *
+ * In fact, we permit the NAND Flash MTD system to have an in-memory BBT, so
+ * this function is *only* called when we take it away.
+ *
+ * Thus, this function is only called when we want *all* blocks to look good,
+ * so it *always* return success.
+ */
+static int mxs_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+ return 0;
+}
+
+/*
+ * Nominally, the purpose of this function is to look for or create the bad
+ * block table. In fact, since the we call this function at the very end of
+ * the initialization process started by nand_scan(), and we doesn't have a
+ * more formal mechanism, we "hook" this function to continue init process.
+ *
+ * At this point, the physical NAND Flash chips have been identified and
+ * counted, so we know the physical geometry. This enables us to make some
+ * important configuration decisions.
+ *
+ * The return value of this function propogates directly back to this driver's
+ * call to nand_scan(). Anything other than zero will cause this driver to
+ * tear everything down and declare failure.
+ */
+static int mxs_nand_scan_bbt(struct mtd_info *mtd)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mxs_nand_info *nand_info = nand->priv;
+ struct mx28_bch_regs *bch_regs = (struct mx28_bch_regs *)MXS_BCH_BASE;
+ uint32_t tmp;
+
+ /* Configure BCH and set NFC geometry */
+ mx28_reset_block(&bch_regs->hw_bch_ctrl_reg);
+
+ /* Configure layout 0 */
+ tmp = (mxs_nand_ecc_chunk_cnt(mtd->writesize) - 1)
+ << BCH_FLASHLAYOUT0_NBLOCKS_OFFSET;
+ tmp |= MXS_NAND_METADATA_SIZE << BCH_FLASHLAYOUT0_META_SIZE_OFFSET;
+ tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
+ << BCH_FLASHLAYOUT0_ECC0_OFFSET;
+ tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+ writel(tmp, &bch_regs->hw_bch_flash0layout0);
+
+ tmp = (mtd->writesize + mtd->oobsize)
+ << BCH_FLASHLAYOUT1_PAGE_SIZE_OFFSET;
+ tmp |= (mxs_nand_get_ecc_strength(mtd->writesize, mtd->oobsize) >> 1)
+ << BCH_FLASHLAYOUT1_ECCN_OFFSET;
+ tmp |= MXS_NAND_CHUNK_DATA_CHUNK_SIZE;
+ writel(tmp, &bch_regs->hw_bch_flash0layout1);
+
+ /* Set *all* chip selects to use layout 0 */
+ writel(0, &bch_regs->hw_bch_layoutselect);
+
+ /* Enable BCH complete interrupt */
+ writel(BCH_CTRL_COMPLETE_IRQ_EN, &bch_regs->hw_bch_ctrl_set);
+
+ /* Hook some operations at the MTD level. */
+ if (mtd->read_oob != mxs_nand_hook_read_oob) {
+ nand_info->hooked_read_oob = mtd->read_oob;
+ mtd->read_oob = mxs_nand_hook_read_oob;
+ }
+
+ if (mtd->write_oob != mxs_nand_hook_write_oob) {
+ nand_info->hooked_write_oob = mtd->write_oob;
+ mtd->write_oob = mxs_nand_hook_write_oob;
+ }
+
+ if (mtd->block_markbad != mxs_nand_hook_block_markbad) {
+ nand_info->hooked_block_markbad = mtd->block_markbad;
+ mtd->block_markbad = mxs_nand_hook_block_markbad;
+ }
+
+ /* We use the reference implementation for bad block management. */
+ return nand_default_bbt(mtd);
+}
+
+/*
+ * Allocate DMA buffers
+ */
+int mxs_nand_alloc_buffers(struct mxs_nand_info *nand_info)
+{
+ uint8_t *buf;
+ const int size = NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE;
+
+ /* DMA buffers */
+ buf = memalign(MXS_DMA_ALIGNMENT, size);
+ if (!buf) {
+ printf("MXS NAND: Error allocating DMA buffers\n");
+ return -ENOMEM;
+ }
+
+ memset(buf, 0, size);
+
+ nand_info->data_buf = buf;
+ nand_info->oob_buf = buf + NAND_MAX_PAGESIZE;
+
+ /* Command buffers */
+ nand_info->cmd_buf = memalign(MXS_DMA_ALIGNMENT,
+ MXS_NAND_COMMAND_BUFFER_SIZE);
+ if (!nand_info->cmd_buf) {
+ free(buf);
+ printf("MXS NAND: Error allocating command buffers\n");
+ return -ENOMEM;
+ }
+ memset(nand_info->cmd_buf, 0, MXS_NAND_COMMAND_BUFFER_SIZE);
+ nand_info->cmd_queue_len = 0;
+
+ return 0;
+}
+
+/*
+ * Initializes the NFC hardware.
+ */
+int mxs_nand_init(struct mxs_nand_info *info)
+{
+ struct mx28_gpmi_regs *gpmi_regs =
+ (struct mx28_gpmi_regs *)MXS_GPMI_BASE;
+ int i = 0;
+
+ info->desc = malloc(sizeof(struct mxs_dma_desc *) *
+ MXS_NAND_DMA_DESCRIPTOR_COUNT);
+ if (!info->desc)
+ goto err1;
+
+ /* Allocate the DMA descriptors. */
+ for (i = 0; i < MXS_NAND_DMA_DESCRIPTOR_COUNT; i++) {
+ info->desc[i] = mxs_dma_desc_alloc();
+ if (!info->desc[i])
+ goto err2;
+ }
+
+ /* Init the DMA controller. */
+ mxs_dma_init();
+
+ /* Reset the GPMI block. */
+ mx28_reset_block(&gpmi_regs->hw_gpmi_ctrl0_reg);
+
+ /*
+ * Choose NAND mode, set IRQ polarity, disable write protection and
+ * select BCH ECC.
+ */
+ clrsetbits_le32(&gpmi_regs->hw_gpmi_ctrl1,
+ GPMI_CTRL1_GPMI_MODE,
+ GPMI_CTRL1_ATA_IRQRDY_POLARITY | GPMI_CTRL1_DEV_RESET |
+ GPMI_CTRL1_BCH_MODE);
+
+ return 0;
+
+err2:
+ free(info->desc);
+err1:
+ for (--i; i >= 0; i--)
+ mxs_dma_desc_free(info->desc[i]);
+ printf("MXS NAND: Unable to allocate DMA descriptors\n");
+ return -ENOMEM;
+}
+
+/*!
+ * This function is called during the driver binding process.
+ *
+ * @param pdev the device structure used to store device specific
+ * information that is used by the suspend, resume and
+ * remove functions
+ *
+ * @return The function always returns 0.
+ */
+int board_nand_init(struct nand_chip *nand)
+{
+ struct mxs_nand_info *nand_info;
+ int err;
+
+ nand_info = malloc(sizeof(struct mxs_nand_info));
+ if (!nand_info) {
+ printf("MXS NAND: Failed to allocate private data\n");
+ return -ENOMEM;
+ }
+ memset(nand_info, 0, sizeof(struct mxs_nand_info));
+
+ err = mxs_nand_alloc_buffers(nand_info);
+ if (err)
+ goto err1;
+
+ err = mxs_nand_init(nand_info);
+ if (err)
+ goto err2;
+
+ memset(&fake_ecc_layout, 0, sizeof(fake_ecc_layout));
+
+ nand->priv = nand_info;
+ nand->options |= NAND_NO_SUBPAGE_WRITE;
+
+ nand->cmd_ctrl = mxs_nand_cmd_ctrl;
+
+ nand->dev_ready = mxs_nand_device_ready;
+ nand->select_chip = mxs_nand_select_chip;
+ nand->block_bad = mxs_nand_block_bad;
+ nand->scan_bbt = mxs_nand_scan_bbt;
+
+ nand->read_byte = mxs_nand_read_byte;
+
+ nand->read_buf = mxs_nand_read_buf;
+ nand->write_buf = mxs_nand_write_buf;
+
+ nand->ecc.read_page = mxs_nand_ecc_read_page;
+ nand->ecc.write_page = mxs_nand_ecc_write_page;
+ nand->ecc.read_oob = mxs_nand_ecc_read_oob;
+ nand->ecc.write_oob = mxs_nand_ecc_write_oob;
+
+ nand->ecc.layout = &fake_ecc_layout;
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.bytes = 9;
+ nand->ecc.size = 512;
+
+ return 0;
+
+err2:
+ free(nand_info->data_buf);
+ free(nand_info->cmd_buf);
+err1:
+ free(nand_info);
+ return err;
+}
diff --git a/drivers/mtd/onenand/Makefile b/drivers/mtd/onenand/Makefile
index b984bd4..b090d40 100644
--- a/drivers/mtd/onenand/Makefile
+++ b/drivers/mtd/onenand/Makefile
@@ -25,8 +25,12 @@ include $(TOPDIR)/config.mk
LIB := $(obj)libonenand.o
+ifndef CONFIG_SPL_BUILD
COBJS-$(CONFIG_CMD_ONENAND) := onenand_uboot.o onenand_base.o onenand_bbt.o
COBJS-$(CONFIG_SAMSUNG_ONENAND) += samsung.o
+else
+COBJS-y := onenand_spl.o
+endif
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c
index 24e02c2..06f187f 100644
--- a/drivers/mtd/onenand/onenand_base.c
+++ b/drivers/mtd/onenand/onenand_base.c
@@ -1943,16 +1943,10 @@ static int onenand_do_lock_cmd(struct mtd_info *mtd, loff_t ofs, size_t len, int
{
struct onenand_chip *this = mtd->priv;
int start, end, block, value, status;
- int wp_status_mask;
start = onenand_block(this, ofs);
end = onenand_block(this, ofs + len);
- if (cmd == ONENAND_CMD_LOCK)
- wp_status_mask = ONENAND_WP_LS;
- else
- wp_status_mask = ONENAND_WP_US;
-
/* Continuous lock scheme */
if (this->options & ONENAND_HAS_CONT_LOCK) {
/* Set start block address */
@@ -2226,19 +2220,21 @@ static const struct onenand_manufacturers onenand_manuf_ids[] = {
static int onenand_check_maf(int manuf)
{
int size = ARRAY_SIZE(onenand_manuf_ids);
- char *name;
int i;
+#ifdef ONENAND_DEBUG
+ char *name;
+#endif
for (i = 0; i < size; i++)
if (manuf == onenand_manuf_ids[i].id)
break;
+#ifdef ONENAND_DEBUG
if (i < size)
name = onenand_manuf_ids[i].name;
else
name = "Unknown";
-#ifdef ONENAND_DEBUG
printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", name, manuf);
#endif
@@ -2255,7 +2251,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd)
{
struct onenand_chip *this = mtd->priv;
unsigned int die, bdry;
- int ret, syscfg, locked;
+ int syscfg, locked;
/* Disable ECC */
syscfg = this->read_word(this->base + ONENAND_REG_SYS_CFG1);
@@ -2266,7 +2262,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd)
this->wait(mtd, FL_SYNCING);
this->command(mtd, FLEXONENAND_CMD_READ_PI, die, 0);
- ret = this->wait(mtd, FL_READING);
+ this->wait(mtd, FL_READING);
bdry = this->read_word(this->base + ONENAND_DATARAM);
if ((bdry >> FLEXONENAND_PI_UNLOCK_SHIFT) == 3)
@@ -2276,7 +2272,7 @@ static int flexonenand_get_boundary(struct mtd_info *mtd)
this->boundary[die] = bdry & FLEXONENAND_PI_MASK;
this->command(mtd, ONENAND_CMD_RESET, 0, 0);
- ret = this->wait(mtd, FL_RESETING);
+ this->wait(mtd, FL_RESETING);
printk(KERN_INFO "Die %d boundary: %d%s\n", die,
this->boundary[die], locked ? "(Locked)" : "(Unlocked)");
diff --git a/drivers/mtd/onenand/onenand_spl.c b/drivers/mtd/onenand/onenand_spl.c
new file mode 100644
index 0000000..50eaa71
--- /dev/null
+++ b/drivers/mtd/onenand/onenand_spl.c
@@ -0,0 +1,146 @@
+/*
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on code:
+ * Copyright (C) 2005-2009 Samsung Electronics
+ * Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <linux/mtd/onenand_regs.h>
+#include <onenand_uboot.h>
+
+/*
+ * Device geometry:
+ * - 2048b page, 128k erase block.
+ * - 4096b page, 256k erase block.
+ */
+enum onenand_spl_pagesize {
+ PAGE_2K = 2048,
+ PAGE_4K = 4096,
+};
+
+#define ONENAND_PAGES_PER_BLOCK 64
+#define onenand_block_address(block) (block)
+#define onenand_sector_address(page) (page << 2)
+#define onenand_buffer_address() ((1 << 3) << 8)
+#define onenand_bufferram_address(block) (0)
+
+static inline uint16_t onenand_readw(uint32_t addr)
+{
+ return readw(CONFIG_SYS_ONENAND_BASE + addr);
+}
+
+static inline void onenand_writew(uint16_t value, uint32_t addr)
+{
+ writew(value, CONFIG_SYS_ONENAND_BASE + addr);
+}
+
+static enum onenand_spl_pagesize onenand_spl_get_geometry(void)
+{
+ uint32_t dev_id, density;
+
+ if (!onenand_readw(ONENAND_REG_TECHNOLOGY)) {
+ dev_id = onenand_readw(ONENAND_REG_DEVICE_ID);
+ density = dev_id >> ONENAND_DEVICE_DENSITY_SHIFT;
+ density &= ONENAND_DEVICE_DENSITY_MASK;
+
+ if (density < ONENAND_DEVICE_DENSITY_4Gb)
+ return PAGE_2K;
+
+ if (dev_id & ONENAND_DEVICE_IS_DDP)
+ return PAGE_2K;
+ }
+
+ return PAGE_4K;
+}
+
+static int onenand_spl_read_page(uint32_t block, uint32_t page, uint32_t *buf,
+ enum onenand_spl_pagesize pagesize)
+{
+ const uint32_t addr = CONFIG_SYS_ONENAND_BASE + ONENAND_DATARAM;
+ uint32_t offset;
+
+ onenand_writew(onenand_block_address(block),
+ ONENAND_REG_START_ADDRESS1);
+
+ onenand_writew(onenand_bufferram_address(block),
+ ONENAND_REG_START_ADDRESS2);
+
+ onenand_writew(onenand_sector_address(page),
+ ONENAND_REG_START_ADDRESS8);
+
+ onenand_writew(onenand_buffer_address(),
+ ONENAND_REG_START_BUFFER);
+
+ onenand_writew(ONENAND_INT_CLEAR, ONENAND_REG_INTERRUPT);
+
+ onenand_writew(ONENAND_CMD_READ, ONENAND_REG_COMMAND);
+
+ while (!(onenand_readw(ONENAND_REG_INTERRUPT) & ONENAND_INT_READ))
+ continue;
+
+ /* Check for invalid block mark */
+ if (page < 2 && (onenand_readw(ONENAND_SPARERAM) != 0xffff))
+ return 1;
+
+ for (offset = 0; offset < pagesize; offset += 4)
+ buf[offset / 4] = readl(addr + offset);
+
+ return 0;
+}
+
+void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst)
+{
+ uint32_t *addr = (uint32_t *)dst;
+ uint32_t total_pages;
+ uint32_t block;
+ uint32_t page, rpage;
+ enum onenand_spl_pagesize pagesize;
+ int ret;
+
+ pagesize = onenand_spl_get_geometry();
+
+ /*
+ * The page can be either 2k or 4k, avoid using DIV_ROUND_UP to avoid
+ * pulling further unwanted functions into the SPL.
+ */
+ if (pagesize == 2048) {
+ total_pages = DIV_ROUND_UP(size, 2048);
+ page = offs / 2048;
+ } else {
+ total_pages = DIV_ROUND_UP(size, 4096);
+ page = offs / 4096;
+ }
+
+ for (; page <= total_pages; page++) {
+ block = page / ONENAND_PAGES_PER_BLOCK;
+ rpage = page & (ONENAND_PAGES_PER_BLOCK - 1);
+ ret = onenand_spl_read_page(block, rpage, addr, pagesize);
+ if (ret) {
+ total_pages += ONENAND_PAGES_PER_BLOCK;
+ page += ONENAND_PAGES_PER_BLOCK - 1;
+ } else {
+ addr += pagesize / 4;
+ }
+ }
+}
diff --git a/drivers/net/davinci_emac.c b/drivers/net/davinci_emac.c
index fa31159..36c33af 100644
--- a/drivers/net/davinci_emac.c
+++ b/drivers/net/davinci_emac.c
@@ -85,15 +85,17 @@ static int emac_rx_queue_active = 0;
/* Receive packet buffers */
static unsigned char emac_rx_buffers[EMAC_MAX_RX_BUFFERS * (EMAC_MAX_ETHERNET_PKT_SIZE + EMAC_PKT_ALIGN)];
-#define MAX_PHY 3
+#ifndef CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
+#define CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT 3
+#endif
/* PHY address for a discovered PHY (0xff - not found) */
-static u_int8_t active_phy_addr[MAX_PHY] = { 0xff, 0xff, 0xff };
+static u_int8_t active_phy_addr[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
/* number of PHY found active */
static u_int8_t num_phy;
-phy_t phy[MAX_PHY];
+phy_t phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
static int davinci_eth_set_mac_addr(struct eth_device *dev)
{
@@ -160,9 +162,8 @@ static int davinci_eth_phy_detect(void)
int j;
unsigned int count = 0;
- active_phy_addr[0] = 0xff;
- active_phy_addr[1] = 0xff;
- active_phy_addr[2] = 0xff;
+ for (i = 0; i < CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT; i++)
+ active_phy_addr[i] = 0xff;
udelay(1000);
phy_act_state = readl(&adap_mdio->ALIVE);
@@ -175,7 +176,14 @@ static int davinci_eth_phy_detect(void)
for (i = 0, j = 0; i < 32; i++)
if (phy_act_state & (1 << i)) {
count++;
- active_phy_addr[j++] = i;
+ if (count < CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT) {
+ active_phy_addr[j++] = i;
+ } else {
+ printf("%s: to many PHYs detected.\n",
+ __func__);
+ count = 0;
+ break;
+ }
}
num_phy = count;
@@ -752,7 +760,7 @@ int davinci_emac_initialize(void)
if (!ret)
return(0);
else
- printf(" %d ETH PHY detected\n", ret);
+ debug_emac(" %d ETH PHY detected\n", ret);
/* Get PHY ID and initialize phy_ops for a detected PHY */
for (i = 0; i < num_phy; i++) {
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 0c0c7cd..b05a4c0 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -42,6 +42,14 @@ DECLARE_GLOBAL_DATA_PTR;
#define CONFIG_FEC_XCV_TYPE MII100
#endif
+/*
+ * The i.MX28 operates with packets in big endian. We need to swap them before
+ * sending and after receiving.
+ */
+#ifdef CONFIG_MX28
+#define CONFIG_FEC_MXC_SWAP_PACKET
+#endif
+
#undef DEBUG
struct nbuf {
@@ -51,6 +59,32 @@ struct nbuf {
uint8_t head[16]; /**< MAC header(6 + 6 + 2) + 2(aligned) */
};
+#ifdef CONFIG_FEC_MXC_SWAP_PACKET
+static void swap_packet(uint32_t *packet, int length)
+{
+ int i;
+
+ for (i = 0; i < DIV_ROUND_UP(length, 4); i++)
+ packet[i] = __swab32(packet[i]);
+}
+#endif
+
+/*
+ * The i.MX28 has two ethernet interfaces, but they are not equal.
+ * Only the first one can access the MDIO bus.
+ */
+#ifdef CONFIG_MX28
+static inline struct ethernet_regs *fec_miiphy_fec_to_eth(struct fec_priv *fec)
+{
+ return (struct ethernet_regs *)MXS_ENET0_BASE;
+}
+#else
+static inline struct ethernet_regs *fec_miiphy_fec_to_eth(struct fec_priv *fec)
+{
+ return fec->eth;
+}
+#endif
+
/*
* MII-interface related functions
*/
@@ -59,7 +93,7 @@ static int fec_miiphy_read(const char *dev, uint8_t phyAddr, uint8_t regAddr,
{
struct eth_device *edev = eth_get_dev_by_name(dev);
struct fec_priv *fec = (struct fec_priv *)edev->priv;
- struct ethernet_regs *eth = fec->eth;
+ struct ethernet_regs *eth = fec_miiphy_fec_to_eth(fec);
uint32_t reg; /* convenient holder for the PHY register */
uint32_t phy; /* convenient holder for the PHY */
@@ -117,7 +151,7 @@ static int fec_miiphy_write(const char *dev, uint8_t phyAddr, uint8_t regAddr,
{
struct eth_device *edev = eth_get_dev_by_name(dev);
struct fec_priv *fec = (struct fec_priv *)edev->priv;
- struct ethernet_regs *eth = fec->eth;
+ struct ethernet_regs *eth = fec_miiphy_fec_to_eth(fec);
uint32_t reg; /* convenient holder for the PHY register */
uint32_t phy; /* convenient holder for the PHY */
@@ -572,6 +606,9 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length)
* Note: We are always using the first buffer for transmission,
* the second will be empty and only used to stop the DMA engine
*/
+#ifdef CONFIG_FEC_MXC_SWAP_PACKET
+ swap_packet((uint32_t *)packet, length);
+#endif
writew(length, &fec->tbd_base[fec->tbd_index].data_length);
writel((uint32_t)packet, &fec->tbd_base[fec->tbd_index].data_pointer);
/*
@@ -668,6 +705,9 @@ static int fec_recv(struct eth_device *dev)
/*
* Fill the buffer and pass it to upper layers
*/
+#ifdef CONFIG_FEC_MXC_SWAP_PACKET
+ swap_packet((uint32_t *)frame->data, frame_length);
+#endif
memcpy(buff, frame->data, frame_length);
NetReceive(buff, frame_length);
len = frame_length;
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index a16f590..faf4fcd 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -57,6 +57,7 @@ COBJS-$(CONFIG_RTC_MK48T59) += mk48t59.o
COBJS-$(CONFIG_RTC_MPC5200) += mpc5xxx.o
COBJS-$(CONFIG_RTC_MPC8xx) += mpc8xx.o
COBJS-$(CONFIG_RTC_MV) += mvrtc.o
+COBJS-$(CONFIG_RTC_MXS) += mxsrtc.o
COBJS-$(CONFIG_RTC_PCF8563) += pcf8563.o
COBJS-$(CONFIG_RTC_PL031) += pl031.o
COBJS-$(CONFIG_RTC_PT7C4338) += pt7c4338.o
diff --git a/drivers/rtc/mxsrtc.c b/drivers/rtc/mxsrtc.c
new file mode 100644
index 0000000..5beb1a0
--- /dev/null
+++ b/drivers/rtc/mxsrtc.c
@@ -0,0 +1,86 @@
+/*
+ * Freescale i.MX28 RTC Driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <rtc.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+#define MXS_RTC_MAX_TIMEOUT 1000000
+
+/* Set time in seconds since 1970-01-01 */
+int mxs_rtc_set_time(uint32_t secs)
+{
+ struct mx28_rtc_regs *rtc_regs = (struct mx28_rtc_regs *)MXS_RTC_BASE;
+ int ret;
+
+ writel(secs, &rtc_regs->hw_rtc_seconds);
+
+ /*
+ * The 0x80 here means seconds were copied to analog. This information
+ * is taken from the linux kernel driver for the STMP37xx RTC since
+ * documentation doesn't mention it.
+ */
+ ret = mx28_wait_mask_clr(&rtc_regs->hw_rtc_stat_reg,
+ 0x80 << RTC_STAT_STALE_REGS_OFFSET, MXS_RTC_MAX_TIMEOUT);
+
+ if (ret)
+ printf("MXS RTC: Timeout waiting for update\n");
+
+ return ret;
+}
+
+int rtc_get(struct rtc_time *time)
+{
+ struct mx28_rtc_regs *rtc_regs = (struct mx28_rtc_regs *)MXS_RTC_BASE;
+ uint32_t secs;
+
+ secs = readl(&rtc_regs->hw_rtc_seconds);
+ to_tm(secs, time);
+
+ return 0;
+}
+
+int rtc_set(struct rtc_time *time)
+{
+ uint32_t secs;
+
+ secs = mktime(time->tm_year, time->tm_mon, time->tm_mday,
+ time->tm_hour, time->tm_min, time->tm_sec);
+
+ return mxs_rtc_set_time(secs);
+}
+
+void rtc_reset(void)
+{
+ struct mx28_rtc_regs *rtc_regs = (struct mx28_rtc_regs *)MXS_RTC_BASE;
+ int ret;
+
+ /* Set time to 1970-01-01 */
+ mxs_rtc_set_time(0);
+
+ /* Reset the RTC block */
+ ret = mx28_reset_block(&rtc_regs->hw_rtc_ctrl_reg);
+ if (ret)
+ printf("MXS RTC: Block reset timeout\n");
+}
diff --git a/drivers/serial/serial_pxa.c b/drivers/serial/serial_pxa.c
index 68469a4..84bb17c 100644
--- a/drivers/serial/serial_pxa.c
+++ b/drivers/serial/serial_pxa.c
@@ -1,4 +1,6 @@
/*
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ *
* (C) Copyright 2002
* Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
*
@@ -32,148 +34,161 @@
#include <watchdog.h>
#include <serial.h>
#include <asm/arch/pxa-regs.h>
+#include <asm/arch/regs-uart.h>
#include <asm/io.h>
DECLARE_GLOBAL_DATA_PTR;
-#define FFUART_INDEX 0
-#define BTUART_INDEX 1
-#define STUART_INDEX 2
+/*
+ * The numbering scheme differs here for PXA25x, PXA27x and PXA3xx so we can
+ * easily handle enabling of clock.
+ */
+#ifdef CONFIG_CPU_MONAHANS
+#define UART_CLK_BASE CKENA_21_BTUART
+#define UART_CLK_REG CKENA
+#define BTUART_INDEX 0
+#define FFUART_INDEX 1
+#define STUART_INDEX 2
+#elif CONFIG_PXA250
+#define UART_CLK_BASE (1 << 4) /* HWUART */
+#define UART_CLK_REG CKEN
+#define HWUART_INDEX 0
+#define STUART_INDEX 1
+#define FFUART_INDEX 2
+#define BTUART_INDEX 3
+#else /* PXA27x */
+#define UART_CLK_BASE CKEN5_STUART
+#define UART_CLK_REG CKEN
+#define STUART_INDEX 0
+#define FFUART_INDEX 1
+#define BTUART_INDEX 2
+#endif
+
+/*
+ * Only PXA250 has HWUART, to avoid poluting the code with more macros,
+ * artificially introduce this.
+ */
+#ifndef CONFIG_PXA250
+#define HWUART_INDEX 0xff
+#endif
#ifndef CONFIG_SERIAL_MULTI
-#if defined (CONFIG_FFUART)
+#if defined(CONFIG_FFUART)
#define UART_INDEX FFUART_INDEX
-#elif defined (CONFIG_BTUART)
+#elif defined(CONFIG_BTUART)
#define UART_INDEX BTUART_INDEX
-#elif defined (CONFIG_STUART)
+#elif defined(CONFIG_STUART)
#define UART_INDEX STUART_INDEX
+#elif defined(CONFIG_HWUART)
+#define UART_INDEX HWUART_INDEX
#else
-#error "Bad: you didn't configure serial ..."
+#error "Please select CONFIG_(FF|BT|ST|HW)UART in board config file."
#endif
#endif
-void pxa_setbrg_dev (unsigned int uart_index)
+uint32_t pxa_uart_get_baud_divider(void)
{
- unsigned int quot = 0;
-
if (gd->baudrate == 1200)
- quot = 768;
+ return 768;
else if (gd->baudrate == 9600)
- quot = 96;
+ return 96;
else if (gd->baudrate == 19200)
- quot = 48;
+ return 48;
else if (gd->baudrate == 38400)
- quot = 24;
+ return 24;
else if (gd->baudrate == 57600)
- quot = 16;
+ return 16;
else if (gd->baudrate == 115200)
- quot = 8;
- else
- hang ();
+ return 8;
+ else /* Unsupported baudrate */
+ return 0;
+}
+struct pxa_uart_regs *pxa_uart_index_to_regs(uint32_t uart_index)
+{
switch (uart_index) {
- case FFUART_INDEX:
-#ifdef CONFIG_CPU_MONAHANS
- writel(readl(CKENA) | CKENA_22_FFUART, CKENA);
-#else
- writel(readl(CKEN) | CKEN6_FFUART, CKEN);
-#endif /* CONFIG_CPU_MONAHANS */
-
- writel(0, FFIER); /* Disable for now */
- writel(0, FFFCR); /* No fifos enabled */
+ case FFUART_INDEX: return (struct pxa_uart_regs *)FFUART_BASE;
+ case BTUART_INDEX: return (struct pxa_uart_regs *)BTUART_BASE;
+ case STUART_INDEX: return (struct pxa_uart_regs *)STUART_BASE;
+ case HWUART_INDEX: return (struct pxa_uart_regs *)HWUART_BASE;
+ default:
+ return NULL;
+ }
+}
- /* set baud rate */
- writel(LCR_WLS0 | LCR_WLS1 | LCR_DLAB, FFLCR);
- writel(quot & 0xff, FFDLL);
- writel(quot >> 8, FFDLH);
- writel(LCR_WLS0 | LCR_WLS1, FFLCR);
+void pxa_uart_toggle_clock(uint32_t uart_index, int enable)
+{
+ uint32_t clk_reg, clk_offset, reg;
- writel(IER_UUE, FFIER); /* Enable FFUART */
- break;
+ clk_reg = UART_CLK_REG;
+ clk_offset = UART_CLK_BASE << uart_index;
- case BTUART_INDEX:
-#ifdef CONFIG_CPU_MONAHANS
- writel(readl(CKENA) | CKENA_21_BTUART, CKENA);
-#else
- writel(readl(CKEN) | CKEN7_BTUART, CKEN);
-#endif /* CONFIG_CPU_MONAHANS */
+ reg = readl(clk_reg);
- writel(0, BTIER);
- writel(0, BTFCR);
+ if (enable)
+ reg |= clk_offset;
+ else
+ reg &= ~clk_offset;
- /* set baud rate */
- writel(LCR_DLAB, BTLCR);
- writel(quot & 0xff, BTDLL);
- writel(quot >> 8, BTDLH);
- writel(LCR_WLS0 | LCR_WLS1, BTLCR);
+ writel(reg, clk_reg);
+}
- writel(IER_UUE, BTIER); /* Enable BFUART */
+/*
+ * Enable clock and set baud rate, parity etc.
+ */
+void pxa_setbrg_dev(uint32_t uart_index)
+{
+ uint32_t divider = 0;
+ struct pxa_uart_regs *uart_regs;
- break;
+ divider = pxa_uart_get_baud_divider();
+ if (!divider)
+ hang();
- case STUART_INDEX:
-#ifdef CONFIG_CPU_MONAHANS
- writel(readl(CKENA) | CKENA_23_STUART, CKENA);
-#else
- writel(readl(CKEN) | CKEN5_STUART, CKEN);
-#endif /* CONFIG_CPU_MONAHANS */
+ uart_regs = pxa_uart_index_to_regs(uart_index);
+ if (!uart_regs)
+ hang();
- writel(0, STIER);
- writel(0, STFCR);
+ pxa_uart_toggle_clock(uart_index, 1);
- /* set baud rate */
- writel(LCR_DLAB, STLCR);
- writel(quot & 0xff, STDLL);
- writel(quot >> 8, STDLH);
- writel(LCR_WLS0 | LCR_WLS1, STLCR);
+ /* Disable interrupts and FIFOs */
+ writel(0, &uart_regs->ier);
+ writel(0, &uart_regs->fcr);
- writel(IER_UUE, STIER); /* Enable STUART */
- break;
+ /* Set baud rate */
+ writel(LCR_WLS0 | LCR_WLS1 | LCR_DLAB, &uart_regs->lcr);
+ writel(divider & 0xff, &uart_regs->dll);
+ writel(divider >> 8, &uart_regs->dlh);
+ writel(LCR_WLS0 | LCR_WLS1, &uart_regs->lcr);
- default:
- hang();
- }
+ /* Enable UART */
+ writel(IER_UUE, &uart_regs->ier);
}
-
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
*/
-int pxa_init_dev (unsigned int uart_index)
+int pxa_init_dev(unsigned int uart_index)
{
pxa_setbrg_dev (uart_index);
-
- return (0);
+ return 0;
}
-
/*
* Output a single byte to the serial port.
*/
-void pxa_putc_dev (unsigned int uart_index,const char c)
+void pxa_putc_dev(unsigned int uart_index, const char c)
{
- switch (uart_index) {
- case FFUART_INDEX:
- /* wait for room in the tx FIFO on FFUART */
- while ((readl(FFLSR) & LSR_TEMT) == 0)
- WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
- writel(c, FFTHR);
- break;
-
- case BTUART_INDEX:
- while ((readl(BTLSR) & LSR_TEMT) == 0)
- WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
- writel(c, BTTHR);
- break;
-
- case STUART_INDEX:
- while ((readl(STLSR) & LSR_TEMT) == 0)
- WATCHDOG_RESET (); /* Reset HW Watchdog, if needed */
- writel(c, STTHR);
- break;
- }
+ struct pxa_uart_regs *uart_regs;
+
+ uart_regs = pxa_uart_index_to_regs(uart_index);
+ if (!uart_regs)
+ hang();
+
+ while (!(readl(&uart_regs->lsr) & LSR_TEMT))
+ WATCHDOG_RESET();
+ writel(c, &uart_regs->thr);
/* If \n, also do \r */
if (c == '\n')
@@ -185,17 +200,15 @@ void pxa_putc_dev (unsigned int uart_index,const char c)
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
-int pxa_tstc_dev (unsigned int uart_index)
+int pxa_tstc_dev(unsigned int uart_index)
{
- switch (uart_index) {
- case FFUART_INDEX:
- return readl(FFLSR) & LSR_DR;
- case BTUART_INDEX:
- return readl(BTLSR) & LSR_DR;
- case STUART_INDEX:
- return readl(STLSR) & LSR_DR;
- }
- return -1;
+ struct pxa_uart_regs *uart_regs;
+
+ uart_regs = pxa_uart_index_to_regs(uart_index);
+ if (!uart_regs)
+ return -1;
+
+ return readl(&uart_regs->lsr) & LSR_DR;
}
/*
@@ -203,187 +216,86 @@ int pxa_tstc_dev (unsigned int uart_index)
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
-int pxa_getc_dev (unsigned int uart_index)
+int pxa_getc_dev(unsigned int uart_index)
{
- switch (uart_index) {
- case FFUART_INDEX:
- while (!(readl(FFLSR) & LSR_DR))
- /* Reset HW Watchdog, if needed */
- WATCHDOG_RESET();
- return (char) readl(FFRBR) & 0xff;
-
- case BTUART_INDEX:
- while (!(readl(BTLSR) & LSR_DR))
- /* Reset HW Watchdog, if needed */
- WATCHDOG_RESET();
- return (char) readl(BTRBR) & 0xff;
- case STUART_INDEX:
- while (!(readl(STLSR) & LSR_DR))
- /* Reset HW Watchdog, if needed */
- WATCHDOG_RESET();
- return (char) readl(STRBR) & 0xff;
- }
- return -1;
-}
+ struct pxa_uart_regs *uart_regs;
-void
-pxa_puts_dev (unsigned int uart_index,const char *s)
-{
- while (*s) {
- pxa_putc_dev (uart_index,*s++);
- }
-}
+ uart_regs = pxa_uart_index_to_regs(uart_index);
+ if (!uart_regs)
+ return -1;
-#if defined (CONFIG_FFUART)
-static int ffuart_init(void)
-{
- return pxa_init_dev(FFUART_INDEX);
+ while (!(readl(&uart_regs->lsr) & LSR_DR))
+ WATCHDOG_RESET();
+ return readl(&uart_regs->rbr) & 0xff;
}
-static void ffuart_setbrg(void)
+void pxa_puts_dev(unsigned int uart_index, const char *s)
{
- return pxa_setbrg_dev(FFUART_INDEX);
+ while (*s)
+ pxa_putc_dev(uart_index, *s++);
}
-static void ffuart_putc(const char c)
-{
- return pxa_putc_dev(FFUART_INDEX,c);
-}
-
-static void ffuart_puts(const char *s)
-{
- return pxa_puts_dev(FFUART_INDEX,s);
-}
-
-static int ffuart_getc(void)
-{
- return pxa_getc_dev(FFUART_INDEX);
-}
-
-static int ffuart_tstc(void)
-{
- return pxa_tstc_dev(FFUART_INDEX);
-}
-
-struct serial_device serial_ffuart_device =
-{
- "serial_ffuart",
- ffuart_init,
- NULL,
- ffuart_setbrg,
- ffuart_getc,
- ffuart_tstc,
- ffuart_putc,
- ffuart_puts,
-};
+#define pxa_uart(uart, UART) \
+ int uart##_init(void) \
+ { \
+ return pxa_init_dev(UART##_INDEX); \
+ } \
+ \
+ void uart##_setbrg(void) \
+ { \
+ return pxa_setbrg_dev(UART##_INDEX); \
+ } \
+ \
+ void uart##_putc(const char c) \
+ { \
+ return pxa_putc_dev(UART##_INDEX, c); \
+ } \
+ \
+ void uart##_puts(const char *s) \
+ { \
+ return pxa_puts_dev(UART##_INDEX, s); \
+ } \
+ \
+ int uart##_getc(void) \
+ { \
+ return pxa_getc_dev(UART##_INDEX); \
+ } \
+ \
+ int uart##_tstc(void) \
+ { \
+ return pxa_tstc_dev(UART##_INDEX); \
+ } \
+
+#define pxa_uart_desc(uart) \
+ struct serial_device serial_##uart##_device = \
+ { \
+ "serial_"#uart, \
+ uart##_init, \
+ NULL, \
+ uart##_setbrg, \
+ uart##_getc, \
+ uart##_tstc, \
+ uart##_putc, \
+ uart##_puts, \
+ };
+
+#define pxa_uart_multi(uart, UART) \
+ pxa_uart(uart, UART) \
+ pxa_uart_desc(uart)
+
+#if defined(CONFIG_HWUART)
+ pxa_uart_multi(hwuart, HWUART)
#endif
-
-#if defined (CONFIG_BTUART)
-static int btuart_init(void)
-{
- return pxa_init_dev(BTUART_INDEX);
-}
-
-static void btuart_setbrg(void)
-{
- return pxa_setbrg_dev(BTUART_INDEX);
-}
-
-static void btuart_putc(const char c)
-{
- return pxa_putc_dev(BTUART_INDEX,c);
-}
-
-static void btuart_puts(const char *s)
-{
- return pxa_puts_dev(BTUART_INDEX,s);
-}
-
-static int btuart_getc(void)
-{
- return pxa_getc_dev(BTUART_INDEX);
-}
-
-static int btuart_tstc(void)
-{
- return pxa_tstc_dev(BTUART_INDEX);
-}
-
-struct serial_device serial_btuart_device =
-{
- "serial_btuart",
- btuart_init,
- NULL,
- btuart_setbrg,
- btuart_getc,
- btuart_tstc,
- btuart_putc,
- btuart_puts,
-};
+#if defined(CONFIG_STUART)
+ pxa_uart_multi(stuart, STUART)
#endif
-
-#if defined (CONFIG_STUART)
-static int stuart_init(void)
-{
- return pxa_init_dev(STUART_INDEX);
-}
-
-static void stuart_setbrg(void)
-{
- return pxa_setbrg_dev(STUART_INDEX);
-}
-
-static void stuart_putc(const char c)
-{
- return pxa_putc_dev(STUART_INDEX,c);
-}
-
-static void stuart_puts(const char *s)
-{
- return pxa_puts_dev(STUART_INDEX,s);
-}
-
-static int stuart_getc(void)
-{
- return pxa_getc_dev(STUART_INDEX);
-}
-
-static int stuart_tstc(void)
-{
- return pxa_tstc_dev(STUART_INDEX);
-}
-
-struct serial_device serial_stuart_device =
-{
- "serial_stuart",
- stuart_init,
- NULL,
- stuart_setbrg,
- stuart_getc,
- stuart_tstc,
- stuart_putc,
- stuart_puts,
-};
+#if defined(CONFIG_FFUART)
+ pxa_uart_multi(ffuart, FFUART)
+#endif
+#if defined(CONFIG_BTUART)
+ pxa_uart_multi(btuart, BTUART)
#endif
-
-#ifndef CONFIG_SERIAL_MULTI
-inline int serial_init(void) {
- return (pxa_init_dev(UART_INDEX));
-}
-void serial_setbrg(void) {
- pxa_setbrg_dev(UART_INDEX);
-}
-int serial_getc(void) {
- return(pxa_getc_dev(UART_INDEX));
-}
-int serial_tstc(void) {
- return(pxa_tstc_dev(UART_INDEX));
-}
-void serial_putc(const char c) {
- pxa_putc_dev(UART_INDEX,c);
-}
-void serial_puts(const char *s) {
- pxa_puts_dev(UART_INDEX,s);
-}
-#endif /* CONFIG_SERIAL_MULTI */
+#ifndef CONFIG_SERIAL_MULTI
+ pxa_uart(serial, UART)
+#endif
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 84ad6fa..6f389f0 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -37,6 +37,7 @@ COBJS-$(CONFIG_KIRKWOOD_SPI) += kirkwood_spi.o
COBJS-$(CONFIG_MPC52XX_SPI) += mpc52xx_spi.o
COBJS-$(CONFIG_MPC8XXX_SPI) += mpc8xxx_spi.o
COBJS-$(CONFIG_MXC_SPI) += mxc_spi.o
+COBJS-$(CONFIG_MXS_SPI) += mxs_spi.o
COBJS-$(CONFIG_OC_TINY_SPI) += oc_tiny_spi.o
COBJS-$(CONFIG_OMAP3_SPI) += omap3_spi.o
COBJS-$(CONFIG_SOFT_SPI) += soft_spi.o
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c
new file mode 100644
index 0000000..4c27fef
--- /dev/null
+++ b/drivers/spi/mxs_spi.c
@@ -0,0 +1,186 @@
+/*
+ * Freescale i.MX28 SPI driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * NOTE: This driver only supports the SPI-controller chipselects,
+ * GPIO driven chipselects are not supported.
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <spi.h>
+#include <asm/errno.h>
+#include <asm/io.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
+
+#define MXS_SPI_MAX_TIMEOUT 1000000
+#define MXS_SPI_PORT_OFFSET 0x2000
+
+struct mxs_spi_slave {
+ struct spi_slave slave;
+ uint32_t max_khz;
+ uint32_t mode;
+ struct mx28_ssp_regs *regs;
+};
+
+static inline struct mxs_spi_slave *to_mxs_slave(struct spi_slave *slave)
+{
+ return container_of(slave, struct mxs_spi_slave, slave);
+}
+
+void spi_init(void)
+{
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+ unsigned int max_hz, unsigned int mode)
+{
+ struct mxs_spi_slave *mxs_slave;
+ uint32_t addr;
+
+ if (bus > 3) {
+ printf("MXS SPI: Max bus number is 3\n");
+ return NULL;
+ }
+
+ mxs_slave = malloc(sizeof(struct mxs_spi_slave));
+ if (!mxs_slave)
+ return NULL;
+
+ addr = MXS_SSP0_BASE + (bus * MXS_SPI_PORT_OFFSET);
+
+ mxs_slave->slave.bus = bus;
+ mxs_slave->slave.cs = cs;
+ mxs_slave->max_khz = max_hz / 1000;
+ mxs_slave->mode = mode;
+ mxs_slave->regs = (struct mx28_ssp_regs *)addr;
+
+ return &mxs_slave->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+ struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
+ free(mxs_slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+ struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
+ struct mx28_ssp_regs *ssp_regs = mxs_slave->regs;
+ uint32_t reg = 0;
+
+ mx28_reset_block(&ssp_regs->hw_ssp_ctrl0_reg);
+
+ writel(SSP_CTRL0_BUS_WIDTH_ONE_BIT, &ssp_regs->hw_ssp_ctrl0);
+
+ reg = SSP_CTRL1_SSP_MODE_SPI | SSP_CTRL1_WORD_LENGTH_EIGHT_BITS;
+ reg |= (mxs_slave->mode & SPI_CPOL) ? SSP_CTRL1_POLARITY : 0;
+ reg |= (mxs_slave->mode & SPI_CPHA) ? SSP_CTRL1_PHASE : 0;
+ writel(reg, &ssp_regs->hw_ssp_ctrl1);
+
+ writel(0, &ssp_regs->hw_ssp_cmd0);
+
+ mx28_set_ssp_busclock(slave->bus, mxs_slave->max_khz);
+
+ return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+}
+
+static void mxs_spi_start_xfer(struct mx28_ssp_regs *ssp_regs)
+{
+ writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_set);
+ writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_clr);
+}
+
+static void mxs_spi_end_xfer(struct mx28_ssp_regs *ssp_regs)
+{
+ writel(SSP_CTRL0_LOCK_CS, &ssp_regs->hw_ssp_ctrl0_clr);
+ writel(SSP_CTRL0_IGNORE_CRC, &ssp_regs->hw_ssp_ctrl0_set);
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+ const void *dout, void *din, unsigned long flags)
+{
+ struct mxs_spi_slave *mxs_slave = to_mxs_slave(slave);
+ struct mx28_ssp_regs *ssp_regs = mxs_slave->regs;
+ int len = bitlen / 8;
+ const char *tx = dout;
+ char *rx = din;
+
+ if (bitlen == 0)
+ return 0;
+
+ if (!rx && !tx)
+ return 0;
+
+ if (flags & SPI_XFER_BEGIN)
+ mxs_spi_start_xfer(ssp_regs);
+
+ while (len--) {
+ /* We transfer 1 byte */
+ writel(1, &ssp_regs->hw_ssp_xfer_size);
+
+ if ((flags & SPI_XFER_END) && !len)
+ mxs_spi_end_xfer(ssp_regs);
+
+ if (tx)
+ writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_clr);
+ else
+ writel(SSP_CTRL0_READ, &ssp_regs->hw_ssp_ctrl0_set);
+
+ writel(SSP_CTRL0_RUN, &ssp_regs->hw_ssp_ctrl0_set);
+
+ if (mx28_wait_mask_set(&ssp_regs->hw_ssp_ctrl0_reg,
+ SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
+ printf("MXS SPI: Timeout waiting for start\n");
+ return -1;
+ }
+
+ if (tx)
+ writel(*tx++, &ssp_regs->hw_ssp_data);
+
+ writel(SSP_CTRL0_DATA_XFER, &ssp_regs->hw_ssp_ctrl0_set);
+
+ if (rx) {
+ if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_status_reg,
+ SSP_STATUS_FIFO_EMPTY, MXS_SPI_MAX_TIMEOUT)) {
+ printf("MXS SPI: Timeout waiting for data\n");
+ return -1;
+ }
+
+ *rx = readl(&ssp_regs->hw_ssp_data);
+ rx++;
+ }
+
+ if (mx28_wait_mask_clr(&ssp_regs->hw_ssp_ctrl0_reg,
+ SSP_CTRL0_RUN, MXS_SPI_MAX_TIMEOUT)) {
+ printf("MXS SPI: Timeout waiting for finish\n");
+ return -1;
+ }
+ }
+
+ return 0;
+}
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index 51b2494..09abb75 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -41,6 +41,7 @@ else
COBJS-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o
endif
COBJS-$(CONFIG_USB_EHCI_MXC) += ehci-mxc.o
+COBJS-$(CONFIG_USB_EHCI_MXS) += ehci-mxs.o
COBJS-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
COBJS-$(CONFIG_USB_EHCI_IXP4XX) += ehci-ixp.o
COBJS-$(CONFIG_USB_EHCI_KIRKWOOD) += ehci-kirkwood.o
diff --git a/drivers/usb/host/ehci-mxs.c b/drivers/usb/host/ehci-mxs.c
new file mode 100644
index 0000000..c795f23
--- /dev/null
+++ b/drivers/usb/host/ehci-mxs.c
@@ -0,0 +1,154 @@
+/*
+ * Freescale i.MX28 USB Host driver
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/regs-common.h>
+#include <asm/arch/regs-base.h>
+#include <asm/arch/regs-clkctrl.h>
+#include <asm/arch/regs-usb.h>
+#include <asm/arch/regs-usbphy.h>
+
+#include "ehci-core.h"
+#include "ehci.h"
+
+#if (CONFIG_EHCI_MXS_PORT != 0) && (CONFIG_EHCI_MXS_PORT != 1)
+#error "MXS EHCI: Invalid port selected!"
+#endif
+
+#ifndef CONFIG_EHCI_MXS_PORT
+#error "MXS EHCI: Please define correct port using CONFIG_EHCI_MXS_PORT!"
+#endif
+
+static struct ehci_mxs {
+ struct mx28_usb_regs *usb_regs;
+ struct mx28_usbphy_regs *phy_regs;
+} ehci_mxs;
+
+int mxs_ehci_get_port(struct ehci_mxs *mxs_usb, int port)
+{
+ uint32_t usb_base, phy_base;
+ switch (port) {
+ case 0:
+ usb_base = MXS_USBCTRL0_BASE;
+ phy_base = MXS_USBPHY0_BASE;
+ break;
+ case 1:
+ usb_base = MXS_USBCTRL1_BASE;
+ phy_base = MXS_USBPHY1_BASE;
+ break;
+ default:
+ printf("CONFIG_EHCI_MXS_PORT (port = %d)\n", port);
+ return -1;
+ }
+
+ mxs_usb->usb_regs = (struct mx28_usb_regs *)usb_base;
+ mxs_usb->phy_regs = (struct mx28_usbphy_regs *)phy_base;
+ return 0;
+}
+
+/* This DIGCTL register ungates clock to USB */
+#define HW_DIGCTL_CTRL 0x8001c000
+#define HW_DIGCTL_CTRL_USB0_CLKGATE (1 << 2)
+#define HW_DIGCTL_CTRL_USB1_CLKGATE (1 << 16)
+
+int ehci_hcd_init(void)
+{
+
+ int ret;
+ uint32_t usb_base, cap_base;
+ struct mx28_register *digctl_ctrl =
+ (struct mx28_register *)HW_DIGCTL_CTRL;
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT);
+ if (ret)
+ return ret;
+
+ /* Reset the PHY block */
+ writel(USBPHY_CTRL_SFTRST, &ehci_mxs.phy_regs->hw_usbphy_ctrl_set);
+ udelay(10);
+ writel(USBPHY_CTRL_SFTRST | USBPHY_CTRL_CLKGATE,
+ &ehci_mxs.phy_regs->hw_usbphy_ctrl_clr);
+
+ /* Enable USB clock */
+ writel(CLKCTRL_PLL0CTRL0_EN_USB_CLKS | CLKCTRL_PLL0CTRL0_POWER,
+ &clkctrl_regs->hw_clkctrl_pll0ctrl0_set);
+ writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS | CLKCTRL_PLL1CTRL0_POWER,
+ &clkctrl_regs->hw_clkctrl_pll1ctrl0_set);
+
+ writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE,
+ &digctl_ctrl->reg_clr);
+
+ /* Start USB PHY */
+ writel(0, &ehci_mxs.phy_regs->hw_usbphy_pwd);
+
+ /* Enable UTMI+ Level 2 and Level 3 compatibility */
+ writel(USBPHY_CTRL_ENUTMILEVEL3 | USBPHY_CTRL_ENUTMILEVEL2 | 1,
+ &ehci_mxs.phy_regs->hw_usbphy_ctrl_set);
+
+ usb_base = ((uint32_t)ehci_mxs.usb_regs) + 0x100;
+ hccr = (struct ehci_hccr *)usb_base;
+
+ cap_base = ehci_readl(&hccr->cr_capbase);
+ hcor = (struct ehci_hcor *)(usb_base + HC_LENGTH(cap_base));
+
+ return 0;
+}
+
+int ehci_hcd_stop(void)
+{
+ int ret;
+ uint32_t tmp;
+ struct mx28_register *digctl_ctrl =
+ (struct mx28_register *)HW_DIGCTL_CTRL;
+ struct mx28_clkctrl_regs *clkctrl_regs =
+ (struct mx28_clkctrl_regs *)MXS_CLKCTRL_BASE;
+
+ ret = mxs_ehci_get_port(&ehci_mxs, CONFIG_EHCI_MXS_PORT);
+ if (ret)
+ return ret;
+
+ /* Stop the USB port */
+ tmp = ehci_readl(&hcor->or_usbcmd);
+ tmp &= ~CMD_RUN;
+ ehci_writel(tmp, &hcor->or_usbcmd);
+
+ /* Disable the PHY */
+ tmp = USBPHY_PWD_RXPWDRX | USBPHY_PWD_RXPWDDIFF |
+ USBPHY_PWD_RXPWD1PT1 | USBPHY_PWD_RXPWDENV |
+ USBPHY_PWD_TXPWDV2I | USBPHY_PWD_TXPWDIBIAS |
+ USBPHY_PWD_TXPWDFS;
+ writel(tmp, &ehci_mxs.phy_regs->hw_usbphy_pwd);
+
+ /* Disable USB clock */
+ writel(CLKCTRL_PLL0CTRL0_EN_USB_CLKS,
+ &clkctrl_regs->hw_clkctrl_pll0ctrl0_clr);
+ writel(CLKCTRL_PLL1CTRL0_EN_USB_CLKS,
+ &clkctrl_regs->hw_clkctrl_pll1ctrl0_clr);
+
+ /* Gate off the USB clock */
+ writel(HW_DIGCTL_CTRL_USB0_CLKGATE | HW_DIGCTL_CTRL_USB1_CLKGATE,
+ &digctl_ctrl->reg_set);
+
+ return 0;
+}
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 8b8113d..a370c15 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -29,6 +29,9 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+
+#define MACH_TYPE_MPL_VCMA9 227
+
/*
* High Level Configuration Options
* (easy to change)
@@ -37,6 +40,7 @@
#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24x0-type SoC */
#define CONFIG_S3C2410 /* specifically a SAMSUNG S3C2410 SoC */
#define CONFIG_VCMA9 /* on a MPL VCMA9 Board */
+#define CONFIG_MACH_TYPE MACH_TYPE_MPL_VCMA9 /* Machine type */
#define CONFIG_SYS_TEXT_BASE 0x0
diff --git a/include/configs/csb226.h b/include/configs/csb226.h
deleted file mode 100644
index 804469b..0000000
--- a/include/configs/csb226.h
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de.
- *
- * Configuration for the Cogent CSB226 board. For details see
- * http://www.cogcomp.com/csb_csb226.htm
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * include/configs/csb226.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define DEBUG 1
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
-#define CONFIG_CSB226 1 /* on a CSB226 board */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
- /* for timer/console/ethernet */
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_SYS_TEXT_BASE 0x0
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART 1 /* we use FFUART on CSB226 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 19200
-#undef CONFIG_MISC_INIT_R /* not used yet */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_RUN
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_CACHE
-
-
-#define CONFIG_BOOTDELAY 3
-#define CONFIG_BOOTARGS "console=ttyS0,19200 ip=192.168.1.10,192.168.1.5,,255,255,255,0,csb root=/dev/nfs, ether=0,0x08000000,eth0"
-#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.1.56
-#define CONFIG_SERVERIP 192.168.1.5
-#define CONFIG_BOOTCOMMAND "bootm 0x40000"
-#define CONFIG_SHOW_BOOT_PROGRESS
-
-#define CONFIG_CMDLINE_TAG 1
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 19200 /* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-
-/*
- * Size of malloc() pool; this lives below the uppermost 128 KiB which are
- * used for the RAM copy of the uboot code
- *
- */
-#define CONFIG_SYS_MALLOC_LEN (128*1024)
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 128 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
- /* RS: where is this documented? */
- /* RS: is this where U-Boot is */
- /* RS: relocated to in RAM? */
-
-#define CONFIG_SYS_HZ 1000
- /* RS: the oscillator is actually 3680130?? */
-#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */
- /* 0101000001 */
- /* ^^^^^ Memory Speed 99.53 MHz */
- /* ^^ Run Mode Speed = 2x Mem Speed */
- /* ^^ Turbo Mode Sp. = 1x Run M. Sp. */
-
-#define CONFIG_SYS_MONITOR_LEN 0x1c000 /* 112 KiB */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * Network chip
- */
-#define CONFIG_CS8900
-#define CONFIG_CS8900_BUS32
-#define CONFIG_CS8900_BASE 0x08000000
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
-
-#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* RAM starts here */
-#define CONFIG_SYS_DRAM_SIZE 0x02000000
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
-
-# if 0
-/* FIXME: switch to _documented_ registers */
-/*
- * GPIO settings
- *
- * GP15 == nCS1 is 1
- * GP24 == SFRM is 1
- * GP25 == TXD is 1
- * GP33 == nCS5 is 1
- * GP39 == FFTXD is 1
- * GP41 == RTS is 1
- * GP47 == TXD is 1
- * GP49 == nPWE is 1
- * GP62 == LED_B is 1
- * GP63 == TDM_OE is 1
- * GP78 == nCS2 is 1
- * GP79 == nCS3 is 1
- * GP80 == nCS4 is 1
- */
-#define CONFIG_SYS_GPSR0_VAL 0x03008000
-#define CONFIG_SYS_GPSR1_VAL 0xC0028282
-#define CONFIG_SYS_GPSR2_VAL 0x0001C000
-
-/* GP02 == DON_RST is 0
- * GP23 == SCLK is 0
- * GP45 == USB_ACT is 0
- * GP60 == PLLEN is 0
- * GP61 == LED_A is 0
- * GP73 == SWUPD_LED is 0
- */
-#define CONFIG_SYS_GPCR0_VAL 0x00800004
-#define CONFIG_SYS_GPCR1_VAL 0x30002000
-#define CONFIG_SYS_GPCR2_VAL 0x00000100
-
-/* GP00 == DON_READY is input
- * GP01 == DON_OK is input
- * GP02 == DON_RST is output
- * GP03 == RESET_IND is input
- * GP07 == RES11 is input
- * GP09 == RES12 is input
- * GP11 == SWUPDATE is input
- * GP14 == nPOWEROK is input
- * GP15 == nCS1 is output
- * GP17 == RES22 is input
- * GP18 == RDY is input
- * GP23 == SCLK is output
- * GP24 == SFRM is output
- * GP25 == TXD is output
- * GP26 == RXD is input
- * GP32 == RES21 is input
- * GP33 == nCS5 is output
- * GP34 == FFRXD is input
- * GP35 == CTS is input
- * GP39 == FFTXD is output
- * GP41 == RTS is output
- * GP42 == USB_OK is input
- * GP45 == USB_ACT is output
- * GP46 == RXD is input
- * GP47 == TXD is output
- * GP49 == nPWE is output
- * GP58 == nCPUBUSINT is input
- * GP59 == LANINT is input
- * GP60 == PLLEN is output
- * GP61 == LED_A is output
- * GP62 == LED_B is output
- * GP63 == TDM_OE is output
- * GP64 == nDSPINT is input
- * GP65 == STRAP0 is input
- * GP67 == STRAP1 is input
- * GP69 == STRAP2 is input
- * GP70 == STRAP3 is input
- * GP71 == STRAP4 is input
- * GP73 == SWUPD_LED is output
- * GP78 == nCS2 is output
- * GP79 == nCS3 is output
- * GP80 == nCS4 is output
- */
-#define CONFIG_SYS_GPDR0_VAL 0x03808004
-#define CONFIG_SYS_GPDR1_VAL 0xF002A282
-#define CONFIG_SYS_GPDR2_VAL 0x0001C200
-
-/* GP15 == nCS1 is AF10
- * GP18 == RDY is AF01
- * GP23 == SCLK is AF10
- * GP24 == SFRM is AF10
- * GP25 == TXD is AF10
- * GP26 == RXD is AF01
- * GP33 == nCS5 is AF10
- * GP34 == FFRXD is AF01
- * GP35 == CTS is AF01
- * GP39 == FFTXD is AF10
- * GP41 == RTS is AF10
- * GP46 == RXD is AF10
- * GP47 == TXD is AF01
- * GP49 == nPWE is AF10
- * GP78 == nCS2 is AF10
- * GP79 == nCS3 is AF10
- * GP80 == nCS4 is AF10
- */
-#define CONFIG_SYS_GAFR0_L_VAL 0x80000000
-#define CONFIG_SYS_GAFR0_U_VAL 0x001A8010
-#define CONFIG_SYS_GAFR1_L_VAL 0x60088058
-#define CONFIG_SYS_GAFR1_U_VAL 0x00000008
-#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000
-#define CONFIG_SYS_GAFR2_U_VAL 0x00000002
-
-
-/* FIXME: set GPIO_RER/FER */
-
-/* RDH = 1
- * PH = 1
- * VFS = 1
- * BFS = 1
- * SSS = 1
- */
-#define CONFIG_SYS_PSSR_VAL 0x37
-
-/*
- * Memory settings
- *
- * This is the configuration for nCS0/1 -> flash banks
- * configuration for nCS1:
- * [31] 0 - Slower Device
- * [30:28] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
- * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns
- * [19] 1 - 16 Bit bus width
- * [18:16] 000 - nonburst RAM or FLASH
- * configuration for nCS0:
- * [15] 0 - Slower Device
- * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
- * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns
- * [03] 1 - 16 Bit bus width
- * [02:00] 000 - nonburst RAM or FLASH
- */
-#define CONFIG_SYS_MSC0_VAL 0x25b825b8 /* flash banks */
-
-/* This is the configuration for nCS2/3 -> TDM-Switch, DSP
- * configuration for nCS3: DSP
- * [31] 0 - Slower Device
- * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns
- * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns
- * [19] 1 - 16 Bit bus width
- * [18:16] 100 - variable latency I/O
- * configuration for nCS2: TDM-Switch
- * [15] 0 - Slower Device
- * [14:12] 101 - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns
- * [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns
- * [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns
- * [03] 1 - 16 Bit bus width
- * [02:00] 100 - variable latency I/O
- */
-#define CONFIG_SYS_MSC1_VAL 0x123C593C /* TDM switch, DSP */
-
-/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller
- *
- * configuration for nCS5: LAN Controller
- * [31] 0 - Slower Device
- * [30:28] 001 - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns
- * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns
- * [19] 1 - 16 Bit bus width
- * [18:16] 100 - variable latency I/O
- * configuration for nCS4: ExtBus
- * [15] 0 - Slower Device
- * [14:12] 110 - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns
- * [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns
- * [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns
- * [03] 1 - 16 Bit bus width
- * [02:00] 100 - variable latency I/O
- */
-#define CONFIG_SYS_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */
-
-/* MDCNFG: SDRAM Configuration Register
- *
- * [31:29] 000 - reserved
- * [28] 0 - no SA1111 compatiblity mode
- * [27] 0 - latch return data with return clock
- * [26] 0 - alternate addressing for pair 2/3
- * [25:24] 00 - timings
- * [23] 0 - internal banks in lower partition 2/3 (not used)
- * [22:21] 00 - row address bits for partition 2/3 (not used)
- * [20:19] 00 - column address bits for partition 2/3 (not used)
- * [18] 0 - SDRAM partition 2/3 width is 32 bit
- * [17] 0 - SDRAM partition 3 disabled
- * [16] 0 - SDRAM partition 2 disabled
- * [15:13] 000 - reserved
- * [12] 1 - SA1111 compatiblity mode
- * [11] 1 - latch return data with return clock
- * [10] 0 - no alternate addressing for pair 0/1
- * [09:08] 01 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk
- * [7] 1 - 4 internal banks in lower partition pair
- * [06:05] 10 - 13 row address bits for partition 0/1
- * [04:03] 01 - 9 column address bits for partition 0/1
- * [02] 0 - SDRAM partition 0/1 width is 32 bit
- * [01] 0 - disable SDRAM partition 1
- * [00] 1 - enable SDRAM partition 0
- */
-/* use the configuration above but disable partition 0 */
-#define CONFIG_SYS_MDCNFG_VAL 0x000019c8
-
-/* MDREFR: SDRAM Refresh Control Register
- *
- * [32:26] 0 - reserved
- * [25] 0 - K2FREE: not free running
- * [24] 0 - K1FREE: not free running
- * [23] 1 - K0FREE: not free running
- * [22] 0 - SLFRSH: self refresh disabled
- * [21] 0 - reserved
- * [20] 0 - APD: no auto power down
- * [19] 0 - K2DB2: SDCLK2 is MemClk
- * [18] 0 - K2RUN: disable SDCLK2
- * [17] 0 - K1DB2: SDCLK1 is MemClk
- * [16] 1 - K1RUN: enable SDCLK1
- * [15] 1 - E1PIN: SDRAM clock enable
- * [14] 1 - K0DB2: SDCLK0 is MemClk
- * [13] 0 - K0RUN: disable SDCLK0
- * [12] 1 - E0PIN: disable SDCKE0
- * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
- */
-#define CONFIG_SYS_MDREFR_VAL 0x0081D018
-
-/* MDMRS: Mode Register Set Configuration Register
- *
- * [31] 0 - reserved
- * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used)
- * [22:20] 000 - MDCL2: SDRAM2/3 Cas Latency. (not used)
- * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used)
- * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used)
- * [15] 0 - reserved
- * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value.
- * [06:04] 010 - MDCL0: SDRAM0/1 Cas Latency.
- * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
- * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4.
- */
-#define CONFIG_SYS_MDMRS_VAL 0x00020022
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL 0x00000000
-#define CONFIG_SYS_MCMEM0_VAL 0x00000000
-#define CONFIG_SYS_MCMEM1_VAL 0x00000000
-#define CONFIG_SYS_MCATT0_VAL 0x00000000
-#define CONFIG_SYS_MCATT1_VAL 0x00000000
-#define CONFIG_SYS_MCIO0_VAL 0x00000000
-#define CONFIG_SYS_MCIO1_VAL 0x00000000
-#endif
-
-/*
- * GPIO settings
- */
-#define CONFIG_SYS_GPSR0_VAL 0xFFFFFFFF
-#define CONFIG_SYS_GPSR1_VAL 0xFFFFFFFF
-#define CONFIG_SYS_GPSR2_VAL 0xFFFFFFFF
-#define CONFIG_SYS_GPCR0_VAL 0x08022080
-#define CONFIG_SYS_GPCR1_VAL 0x00000000
-#define CONFIG_SYS_GPCR2_VAL 0x00000000
-#define CONFIG_SYS_GPDR0_VAL 0xCD82A878
-#define CONFIG_SYS_GPDR1_VAL 0xFCFFAB80
-#define CONFIG_SYS_GPDR2_VAL 0x0001FFFF
-#define CONFIG_SYS_GAFR0_L_VAL 0x80000000
-#define CONFIG_SYS_GAFR0_U_VAL 0xA5254010
-#define CONFIG_SYS_GAFR1_L_VAL 0x599A9550
-#define CONFIG_SYS_GAFR1_U_VAL 0xAAA5AAAA
-#define CONFIG_SYS_GAFR2_L_VAL 0xAAAAAAAA
-#define CONFIG_SYS_GAFR2_U_VAL 0x00000002
-
-/* FIXME: set GPIO_RER/FER */
-
-#define CONFIG_SYS_PSSR_VAL 0x20
-
-#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10
-#define CONFIG_SYS_CKEN 0x0
-
-/*
- * Memory settings
- */
-
-#define CONFIG_SYS_MSC0_VAL 0x2ef15af0
-#define CONFIG_SYS_MSC1_VAL 0x00003ff4
-#define CONFIG_SYS_MSC2_VAL 0x7ff07ff0
-#define CONFIG_SYS_MDCNFG_VAL 0x09a909a9
-#define CONFIG_SYS_MDREFR_VAL 0x038ff030
-#define CONFIG_SYS_MDMRS_VAL 0x00220022
-#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
-#define CONFIG_SYS_SXCNFG_VAL 0x00000000
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL 0x00000000
-#define CONFIG_SYS_MCMEM0_VAL 0x00000000
-#define CONFIG_SYS_MCMEM1_VAL 0x00000000
-#define CONFIG_SYS_MCATT0_VAL 0x00000000
-#define CONFIG_SYS_MCATT1_VAL 0x00000000
-#define CONFIG_SYS_MCIO0_VAL 0x00000000
-#define CONFIG_SYS_MCIO1_VAL 0x00000000
-
-#define CSB226_USER_LED0 0x00000008
-#define CSB226_USER_LED1 0x00000010
-#define CSB226_USER_LED2 0x00000020
-
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sect. on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + 0x1C000)
- /* Addr of Environment Sector */
-#define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/da850_am18xxevm.h b/include/configs/da850_am18xxevm.h
new file mode 100644
index 0000000..92b83ff
--- /dev/null
+++ b/include/configs/da850_am18xxevm.h
@@ -0,0 +1,245 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Based on davinci_dvevm.h. Original Copyrights follow:
+ *
+ * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * Board
+ */
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_USE_SPIFLASH
+
+
+/*
+ * SoC Configuration
+ */
+#define CONFIG_MACH_DAVINCI_DA850_EVM
+#define CONFIG_ARM926EJS /* arm926ejs CPU core */
+#define CONFIG_SOC_DA8XX /* TI DA8xx SoC */
+#define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID)
+#define CONFIG_SYS_OSCIN_FREQ 24000000
+#define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE
+#define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID)
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SYS_TEXT_BASE 0xc1080000
+
+/*
+ * Memory Info
+ */
+#define CONFIG_SYS_MALLOC_LEN (0x10000 + 1*1024*1024) /* malloc() len */
+#define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */
+#define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */
+#define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/
+
+/* memtest start addr */
+#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000)
+
+/* memtest will be run on 16MB */
+#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024)
+
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define CONFIG_STACKSIZE (256*1024) /* regular stack */
+
+/*
+ * Serial Driver info
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */
+#define CONFIG_SYS_NS16550_COM1 DAVINCI_UART2_BASE /* Base address of UART2 */
+#define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID)
+#define CONFIG_CONS_INDEX 1 /* use UART0 for console */
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_SPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_WINBOND
+#define CONFIG_DAVINCI_SPI
+#define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE
+#define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID)
+#define CONFIG_SF_DEFAULT_SPEED 30000000
+#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
+
+/*
+ * I2C Configuration
+ */
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CONFIG_SYS_I2C_SPEED 25000
+#define CONFIG_SYS_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */
+#define CONFIG_SYS_I2C_EXPANDER_ADDR 0x20
+
+/*
+ * Flash & Environment
+ */
+#ifdef CONFIG_USE_NAND
+#undef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_NAND_DAVINCI
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_NAND /* U-Boot env in NAND Flash */
+#define CONFIG_ENV_OFFSET 0x0 /* Block 0--not used by bootcode */
+#define CONFIG_ENV_SIZE (128 << 10)
+#define CONFIG_SYS_NAND_USE_FLASH_BBT
+#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
+#define CONFIG_SYS_NAND_PAGE_2K
+#define CONFIG_SYS_NAND_CS 3
+#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE3_BASE
+#define CONFIG_SYS_CLE_MASK 0x10
+#define CONFIG_SYS_ALE_MASK 0x8
+#undef CONFIG_SYS_NAND_HW_ECC
+#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
+#define NAND_MAX_CHIPS 1
+#endif
+
+/*
+ * Network & Ethernet Configuration
+ */
+#ifdef CONFIG_DRIVER_TI_EMAC
+#define CONFIG_EMAC_MDIO_PHY_NUM 0
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+#define CONFIG_NET_MULTI
+#endif
+
+#ifdef CONFIG_USE_NOR
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
+#define CONFIG_SYS_FLASH_SECT_SZ (128 << 10) /* 128KB */
+#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_SECT_SZ * 3)
+#define CONFIG_ENV_SIZE (10 << 10) /* 10KB */
+#define CONFIG_SYS_FLASH_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
+#define PHYS_FLASH_SIZE (8 << 20) /* Flash size 8MB */
+#define CONFIG_SYS_MAX_FLASH_SECT ((PHYS_FLASH_SIZE/CONFIG_SYS_FLASH_SECT_SZ)\
+ + 3)
+#define CONFIG_ENV_SECT_SIZE CONFIG_SYS_FLASH_SECT_SZ
+#endif
+
+#ifdef CONFIG_USE_SPIFLASH
+#undef CONFIG_ENV_IS_IN_FLASH
+#undef CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE (64 << 10)
+#define CONFIG_ENV_OFFSET (256 << 10)
+#define CONFIG_ENV_SECT_SIZE (64 << 10)
+#define CONFIG_SYS_NO_FLASH
+#endif
+
+/*
+ * U-Boot general configuration
+ */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_BOOTFILE "uImage" /* Boot file name */
+#define CONFIG_SYS_PROMPT "U-Boot > " /* Command Prompt */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
+#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+
+/*
+ * Linux Information
+ */
+#define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100)
+#define CONFIG_HWCONFIG /* enable hwconfig */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTARGS \
+ "mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_EXTRA_ENV_SETTINGS "hwconfig=dsp:wake=yes"
+
+/*
+ * U-Boot commands
+ */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_MEMORY
+
+#ifndef CONFIG_DRIVER_TI_EMAC
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_PING
+#endif
+
+#ifdef CONFIG_USE_NAND
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_NAND
+
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_LZO
+#define CONFIG_RBTREE
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#endif
+
+#ifdef CONFIG_USE_SPIFLASH
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_FLASH
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SAVEENV
+#endif
+
+#if !defined(CONFIG_USE_NAND) && \
+ !defined(CONFIG_USE_NOR) && \
+ !defined(CONFIG_USE_SPIFLASH)
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_SIZE (16 << 10)
+#undef CONFIG_CMD_IMLS
+#undef CONFIG_CMD_ENV
+#endif
+
+/* additions for new relocation code, must added to all boards */
+#define CONFIG_SYS_SDRAM_BASE 0xc0000000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
+ /* Fix this */ GENERATED_GBL_DATA_SIZE)
+#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_dm6467Tevm.h b/include/configs/davinci_dm6467Tevm.h
new file mode 100644
index 0000000..f7c994e
--- /dev/null
+++ b/include/configs/davinci_dm6467Tevm.h
@@ -0,0 +1,163 @@
+/*
+ * Copyright (C) 2011 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* Spectrum Digital TMS320DM6467T EVM board */
+#define DAVINCI_DM6467EVM
+#define DAVINCI_DM6467TEVM
+#define CONFIG_SYS_USE_NAND
+#define CONFIG_SYS_NAND_SMALLPAGE
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+
+/* SoC Configuration */
+#define CONFIG_ARM926EJS /* arm926ejs CPU */
+
+/* Clock rates detection */
+#ifndef __ASSEMBLY__
+extern unsigned int davinci_arm_clk_get(void);
+#endif
+
+#define CFG_REFCLK_FREQ 33000000
+/* Arm Clock frequency */
+#define CONFIG_SYS_CLK_FREQ davinci_arm_clk_get()
+/* Timer Input clock freq */
+#define CONFIG_SYS_HZ_CLOCK (CONFIG_SYS_CLK_FREQ/2)
+#define CONFIG_SYS_TIMERBASE 0x01c21400 /* use timer 0 */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SOC_DM646X
+
+/* EEPROM definitions for EEPROM */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
+
+/* Memory Info */
+#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* 1 MiB */
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END 0x81000000 /* 16MB RAM test */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_STACKSIZE (256 << 10) /* 256 KiB */
+#define PHYS_SDRAM_1 0x80000000 /* DDR Start */
+#define PHYS_SDRAM_1_SIZE (256 << 20) /* DDR size 256MB */
+
+/* Linux interfacing */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_SYS_BARGSIZE 1024 /* Bootarg Size */
+#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */
+#define CONFIG_REVISION_TAG
+
+/* Serial Driver info */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE 4
+#define CONFIG_SYS_NS16550_COM1 0x01c20000
+#define CONFIG_SYS_NS16550_CLK 24000000
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/* I2C Configuration */
+#define CONFIG_HARD_I2C
+#define CONFIG_DRIVER_DAVINCI_I2C
+#define CONFIG_SYS_I2C_SPEED 80000
+#define CONFIG_SYS_I2C_SLAVE 10
+
+/* Network & Ethernet Configuration */
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_EMAC_MDIO_PHY_NUM 1
+#define CONFIG_MII
+#define CONFIG_BOOTP_DEFAULT
+#define CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS2
+#define CONFIG_BOOTP_SEND_HOSTNAME
+#define CONFIG_NET_RETRY_COUNT 10
+#define CONFIG_CMD_NET
+
+/* Flash & Environment */
+#define CONFIG_SYS_NO_FLASH
+#ifdef CONFIG_SYS_USE_NAND
+#define CONFIG_NAND_DAVINCI
+#define CONFIG_SYS_NAND_CS 2
+#undef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
+#define CONFIG_SYS_NAND_BASE_LIST {0x42000000, }
+#define CONFIG_SYS_NAND_HW_ECC
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_ENV_OFFSET 0
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE (4 << 10) /* 4 KiB */
+#endif
+
+/* U-Boot general configuration */
+#undef CONFIG_USE_IRQ /* No IRQ/FIQ in U-Boot */
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTFILE "uImage" /* Boot file name */
+#define CONFIG_SYS_PROMPT "DM6467 EVM > " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_VERSION_VARIABLE
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CRC32_VERIFY
+#define CONFIG_MX_CYCLIC
+#define CONFIG_BOOTCOMMAND "source 0x82080000; dhcp; bootm"
+#define CONFIG_BOOTARGS \
+ "mem=120M console=ttyS0,115200n8 " \
+ "root=/dev/hda1 rw noinitrd ip=dhcp"
+
+/* U-Boot commands */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#undef CONFIG_CMD_BDI
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_SETGETDCR
+#ifdef CONFIG_SYS_USE_NAND
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_IMLS
+#define CONFIG_CMD_NAND
+#endif
+
+#define CONFIG_MAX_RAM_BANK_SIZE (256 << 20) /* 256 MB */
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/davinci_dm6467evm.h b/include/configs/davinci_dm6467evm.h
index ec1c31c..c9a0cd1 100644
--- a/include/configs/davinci_dm6467evm.h
+++ b/include/configs/davinci_dm6467evm.h
@@ -65,6 +65,7 @@ extern unsigned int davinci_arm_clk_get(void);
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_SYS_BARGSIZE 1024 /* Bootarg Size */
#define CONFIG_SYS_LOAD_ADDR 0x80700000 /* kernel address */
+#define CONFIG_REVISION_TAG
/* Serial Driver info */
#define CONFIG_SYS_NS16550
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 6c51a27..e1743dc 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -337,6 +337,7 @@
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
/* NAND boot config */
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_PAGE_COUNT 64
#define CONFIG_SYS_NAND_PAGE_SIZE 2048
#define CONFIG_SYS_NAND_OOBSIZE 64
diff --git a/include/configs/innokom.h b/include/configs/innokom.h
deleted file mode 100644
index a0a3da1..0000000
--- a/include/configs/innokom.h
+++ /dev/null
@@ -1,507 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de.
- *
- * Configuration for the Auerswald Innokom CPU board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * include/configs/innokom.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_PXA250 1 /* This is an PXA250 CPU */
-#define CONFIG_INNOKOM 1 /* on an Auerswald Innokom board */
-
-#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
- /* for timer/console/ethernet */
-
-#define CONFIG_SYS_TEXT_BASE 0x0
-
-/* we will never enable dcache, because we have to setup MMU first */
-#define CONFIG_SYS_DCACHE_OFF
-
-/*
- * Hardware drivers
- */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_PXA_SERIAL
-#define CONFIG_FFUART 1 /* we use FFUART on CSB226 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_BAUDRATE 19200
-#define CONFIG_MISC_INIT_R 1 /* we have a misc_init_r() function */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_ECHO
-#define CONFIG_CMD_SAVEENV
-#define CONFIG_CMD_FLASH
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_IMI
-#define CONFIG_CMD_LOADB
-#define CONFIG_CMD_MEMORY
-#define CONFIG_CMD_NET
-#define CONFIG_CMD_RUN
-
-
-#define CONFIG_BOOTDELAY 3
-/* #define CONFIG_BOOTARGS "root=/dev/nfs ip=bootp console=ttyS0,19200" */
-#define CONFIG_BOOTARGS "console=ttyS0,19200"
-#define CONFIG_ETHADDR FF:FF:FF:FF:FF:FF
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.1.56
-#define CONFIG_SERVERIP 192.168.1.2
-#define CONFIG_BOOTCOMMAND "bootm 0x40000"
-#define CONFIG_SHOW_BOOT_PROGRESS
-
-#define CONFIG_CMDLINE_TAG 1
-
-/*
- * Miscellaneous configurable options
- */
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN (256*1024)
-
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "uboot> " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
-#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
-
-#define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* load kernel to this address */
-
-#define CONFIG_SYS_HZ 1000
- /* RS: the oscillator is actually 3680130?? */
-
-#define CONFIG_SYS_CPUSPEED 0x141 /* set core clock to 200/200/100 MHz */
- /* 0101000001 */
- /* ^^^^^ Memory Speed 99.53 MHz */
- /* ^^ Run Mode Speed = 2x Mem Speed */
- /* ^^ Turbo Mode Sp. = 1x Run M. Sp. */
-
-#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128 KiB */
-
- /* valid baudrates */
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-/*
- * I2C bus
- */
-#define CONFIG_I2C_MV 1
-#define CONFIG_MV_I2C_REG 0x40301680
-#define CONFIG_HARD_I2C 1
-#define CONFIG_SYS_I2C_SPEED 50000
-#define CONFIG_SYS_I2C_SLAVE 0xfe
-
-#define CONFIG_ENV_IS_IN_EEPROM 1
-
-#define CONFIG_ENV_OFFSET 0x00 /* environment starts here */
-#define CONFIG_ENV_SIZE 1024 /* 1 KiB */
-#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* A0 = 0 (hardwired) */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* 5 bits = 32 octets */
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 15 /* between stop and start */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* length of address */
-#define CONFIG_SYS_EEPROM_SIZE 4096 /* size in bytes */
-#define CONFIG_SYS_I2C_INIT_BOARD 1 /* board has it's own init */
-
-/*
- * SMSC91C111 Network Card
- */
-#define CONFIG_SMC91111 1
-#define CONFIG_SMC91111_BASE 0x14000000 /* chip select 5 */
-#undef CONFIG_SMC_USE_32_BIT /* 16 bit bus access */
-#undef CONFIG_SMC_91111_EXT_PHY /* we use internal phy */
-#define CONFIG_SMC_AUTONEG_TIMEOUT 10 /* timeout 10 seconds */
-#undef CONFIG_SHOW_ACTIVITY
-#define CONFIG_NET_RETRY_COUNT 10 /* # of retries */
-
-/*
- * Stack sizes
- *
- * The stack sizes are set up in start.S using the settings below
- */
-#define CONFIG_STACKSIZE (128*1024) /* regular stack */
-#ifdef CONFIG_USE_IRQ
-#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
-#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
-#endif
-
-/*
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
-
-#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_SIZE 0x01000000 /* 16 MB */
-
-#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* RAM starts here */
-#define CONFIG_SYS_DRAM_SIZE 0x04000000
-
-#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
-
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SDRAM_1)
-
-/*
- * JFFS2 partitions
- *
- */
-/* development flash */
-#define CONFIG_MTD_INNOKOM_16MB 1
-#undef CONFIG_MTD_INNOKOM_64MB
-
-/* production flash */
-/*
-#define CONFIG_MTD_INNOKOM_64MB 1
-#undef CONFIG_MTD_INNOKOM_16MB
-*/
-
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/* Note: fake mtd_id used, no linux mtd map file */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "nor0=innokom-0"
-*/
-
-/* development flash */
-/*
-#define MTDPARTS_DEFAULT "mtdparts=innokom-0:256k(uboot),768k(kernel),8m(user),7m(data)"
-*/
-
-/* production flash */
-/*
-#define MTDPARTS_DEFAULT "mtdparts=innokom-0:256k(uboot),768k(kernel),16256k(user1),16256k(user2),32m(data)"
-*/
-
-/*
- * GPIO settings
- *
- * GP15 == nCS1 is 1
- * GP24 == SFRM is 1
- * GP25 == TXD is 1
- * GP33 == nCS5 is 1
- * GP39 == FFTXD is 1
- * GP41 == RTS is 1
- * GP47 == TXD is 1
- * GP49 == nPWE is 1
- * GP62 == LED_B is 1
- * GP63 == TDM_OE is 1
- * GP78 == nCS2 is 1
- * GP79 == nCS3 is 1
- * GP80 == nCS4 is 1
- */
-#define CONFIG_SYS_GPSR0_VAL 0x03008000
-#define CONFIG_SYS_GPSR1_VAL 0xC0028282
-#define CONFIG_SYS_GPSR2_VAL 0x0001C000
-
-/* GP02 == DON_RST is 0
- * GP23 == SCLK is 0
- * GP45 == USB_ACT is 0
- * GP60 == PLLEN is 0
- * GP61 == LED_A is 0
- * GP73 == SWUPD_LED is 0
- */
-#define CONFIG_SYS_GPCR0_VAL 0x00800004
-#define CONFIG_SYS_GPCR1_VAL 0x30002000
-#define CONFIG_SYS_GPCR2_VAL 0x00000100
-
-/* GP00 == DON_READY is input
- * GP01 == DON_OK is input
- * GP02 == DON_RST is output
- * GP03 == RESET_IND is input
- * GP07 == RES11 is input
- * GP09 == RES12 is input
- * GP11 == SWUPDATE is input
- * GP14 == nPOWEROK is input
- * GP15 == nCS1 is output
- * GP17 == RES22 is input
- * GP18 == RDY is input
- * GP23 == SCLK is output
- * GP24 == SFRM is output
- * GP25 == TXD is output
- * GP26 == RXD is input
- * GP32 == RES21 is input
- * GP33 == nCS5 is output
- * GP34 == FFRXD is input
- * GP35 == CTS is input
- * GP39 == FFTXD is output
- * GP41 == RTS is output
- * GP42 == USB_OK is input
- * GP45 == USB_ACT is output
- * GP46 == RXD is input
- * GP47 == TXD is output
- * GP49 == nPWE is output
- * GP58 == nCPUBUSINT is input
- * GP59 == LANINT is input
- * GP60 == PLLEN is output
- * GP61 == LED_A is output
- * GP62 == LED_B is output
- * GP63 == TDM_OE is output
- * GP64 == nDSPINT is input
- * GP65 == STRAP0 is input
- * GP67 == STRAP1 is input
- * GP69 == STRAP2 is input
- * GP70 == STRAP3 is input
- * GP71 == STRAP4 is input
- * GP73 == SWUPD_LED is output
- * GP78 == nCS2 is output
- * GP79 == nCS3 is output
- * GP80 == nCS4 is output
- */
-#define CONFIG_SYS_GPDR0_VAL 0x03808004
-#define CONFIG_SYS_GPDR1_VAL 0xF002A282
-#define CONFIG_SYS_GPDR2_VAL 0x0001C200
-
-/* GP15 == nCS1 is AF10
- * GP18 == RDY is AF01
- * GP23 == SCLK is AF10
- * GP24 == SFRM is AF10
- * GP25 == TXD is AF10
- * GP26 == RXD is AF01
- * GP33 == nCS5 is AF10
- * GP34 == FFRXD is AF01
- * GP35 == CTS is AF01
- * GP39 == FFTXD is AF10
- * GP41 == RTS is AF10
- * GP46 == RXD is AF10
- * GP47 == TXD is AF01
- * GP49 == nPWE is AF10
- * GP78 == nCS2 is AF10
- * GP79 == nCS3 is AF10
- * GP80 == nCS4 is AF10
- */
-#define CONFIG_SYS_GAFR0_L_VAL 0x80000000
-#define CONFIG_SYS_GAFR0_U_VAL 0x001A8010
-#define CONFIG_SYS_GAFR1_L_VAL 0x60088058
-#define CONFIG_SYS_GAFR1_U_VAL 0x00000008
-#define CONFIG_SYS_GAFR2_L_VAL 0xA0000000
-#define CONFIG_SYS_GAFR2_U_VAL 0x00000002
-
-
-/* FIXME: set GPIO_RER/FER */
-
-/* RDH = 1
- * PH = 1
- * VFS = 1
- * BFS = 1
- * SSS = 1
- */
-#define CONFIG_SYS_PSSR_VAL 0x37
-
-#define CONFIG_SYS_CCCR CCCR_L27|CCCR_M2|CCCR_N10
-#define CONFIG_SYS_CKEN 0x0
-
-/*
- * Memory settings
- *
- * This is the configuration for nCS0/1 -> flash banks
- * configuration for nCS1:
- * [31] 0 - Slower Device
- * [30:28] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [27:24] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
- * [23:20] 1011 - " for first access: (11+2)*MemClk = 130 ns
- * [19] 1 - 16 Bit bus width
- * [18:16] 000 - nonburst RAM or FLASH
- * configuration for nCS0:
- * [15] 0 - Slower Device
- * [14:12] 010 - CS deselect to CS time: 2*(2*MemClk) = 40 ns
- * [11:08] 0101 - Address to data valid in bursts: (5+1)*MemClk = 60 ns
- * [07:04] 1011 - " for first access: (11+2)*MemClk = 130 ns
- * [03] 1 - 16 Bit bus width
- * [02:00] 000 - nonburst RAM or FLASH
- */
-#define CONFIG_SYS_MSC0_VAL 0x25b825b8 /* flash banks */
-
-/* This is the configuration for nCS2/3 -> TDM-Switch, DSP
- * configuration for nCS3: DSP
- * [31] 0 - Slower Device
- * [30:28] 001 - RRR3: CS deselect to CS time: 1*(2*MemClk) = 20 ns
- * [27:24] 0010 - RDN3: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [23:20] 0011 - RDF3: Address for first access: (3+1)*MemClk = 40 ns
- * [19] 1 - 16 Bit bus width
- * [18:16] 100 - variable latency I/O
- * configuration for nCS2: TDM-Switch
- * [15] 0 - Slower Device
- * [14:12] 101 - RRR2: CS deselect to CS time: 5*(2*MemClk) = 100 ns
- * [11:08] 1001 - RDN2: Address to data valid in bursts: (9+1)*MemClk = 100 ns
- * [07:04] 0011 - RDF2: Address for first access: (3+1)*MemClk = 40 ns
- * [03] 1 - 16 Bit bus width
- * [02:00] 100 - variable latency I/O
- */
-#define CONFIG_SYS_MSC1_VAL 0x123C593C /* TDM switch, DSP */
-
-/* This is the configuration for nCS4/5 -> ExtBus, LAN Controller
- *
- * configuration for nCS5: LAN Controller
- * [31] 0 - Slower Device
- * [30:28] 001 - RRR5: CS deselect to CS time: 1*(2*MemClk) = 20 ns
- * [27:24] 0010 - RDN5: Address to data valid in bursts: (2+1)*MemClk = 30 ns
- * [23:20] 0011 - RDF5: Address for first access: (3+1)*MemClk = 40 ns
- * [19] 1 - 16 Bit bus width
- * [18:16] 100 - variable latency I/O
- * configuration for nCS4: ExtBus
- * [15] 0 - Slower Device
- * [14:12] 110 - RRR4: CS deselect to CS time: 6*(2*MemClk) = 120 ns
- * [11:08] 1100 - RDN4: Address to data valid in bursts: (12+1)*MemClk = 130 ns
- * [07:04] 1101 - RDF4: Address for first access: 13->(15+1)*MemClk = 160 ns
- * [03] 1 - 16 Bit bus width
- * [02:00] 100 - variable latency I/O
- */
-#define CONFIG_SYS_MSC2_VAL 0x123C6CDC /* extra bus, LAN controller */
-
-/* MDCNFG: SDRAM Configuration Register
- *
- * [31:29] 000 - reserved
- * [28] 0 - no SA1111 compatiblity mode
- * [27] 0 - latch return data with return clock
- * [26] 0 - alternate addressing for pair 2/3
- * [25:24] 00 - timings
- * [23] 0 - internal banks in lower partition 2/3 (not used)
- * [22:21] 00 - row address bits for partition 2/3 (not used)
- * [20:19] 00 - column address bits for partition 2/3 (not used)
- * [18] 0 - SDRAM partition 2/3 width is 32 bit
- * [17] 0 - SDRAM partition 3 disabled
- * [16] 0 - SDRAM partition 2 disabled
- * [15:13] 000 - reserved
- * [12] 1 - SA1111 compatiblity mode
- * [11] 1 - latch return data with return clock
- * [10] 0 - no alternate addressing for pair 0/1
- * [09:08] 01 - tRP=2*MemClk CL=2 tRCD=2*MemClk tRAS=5*MemClk tRC=8*MemClk
- * [7] 1 - 4 internal banks in lower partition pair
- * [06:05] 10 - 13 row address bits for partition 0/1
- * [04:03] 01 - 9 column address bits for partition 0/1
- * [02] 0 - SDRAM partition 0/1 width is 32 bit
- * [01] 0 - disable SDRAM partition 1
- * [00] 1 - enable SDRAM partition 0
- */
-/* use the configuration above but disable partition 0 */
-#define CONFIG_SYS_MDCNFG_VAL 0x000019c8
-
-/* MDREFR: SDRAM Refresh Control Register
- *
- * [32:26] 0 - reserved
- * [25] 0 - K2FREE: not free running
- * [24] 0 - K1FREE: not free running
- * [23] 1 - K0FREE: not free running
- * [22] 0 - SLFRSH: self refresh disabled
- * [21] 0 - reserved
- * [20] 0 - APD: no auto power down
- * [19] 0 - K2DB2: SDCLK2 is MemClk
- * [18] 0 - K2RUN: disable SDCLK2
- * [17] 0 - K1DB2: SDCLK1 is MemClk
- * [16] 1 - K1RUN: enable SDCLK1
- * [15] 1 - E1PIN: SDRAM clock enable
- * [14] 1 - K0DB2: SDCLK0 is MemClk
- * [13] 0 - K0RUN: disable SDCLK0
- * [12] 1 - E0PIN: disable SDCKE0
- * [11:00] 000000011000 - (64ms/8192)*MemClkFreq/32 = 24
- */
-#define CONFIG_SYS_MDREFR_VAL 0x0081D018
-
-/* MDMRS: Mode Register Set Configuration Register
- *
- * [31] 0 - reserved
- * [30:23] 00000000- MDMRS2: SDRAM2/3 MRS Value. (not used)
- * [22:20] 000 - MDCL2: SDRAM2/3 Cas Latency. (not used)
- * [19] 0 - MDADD2: SDRAM2/3 burst Type. Fixed to sequential. (not used)
- * [18:16] 010 - MDBL2: SDRAM2/3 burst Length. Fixed to 4. (not used)
- * [15] 0 - reserved
- * [14:07] 00000000- MDMRS0: SDRAM0/1 MRS Value.
- * [06:04] 010 - MDCL0: SDRAM0/1 Cas Latency.
- * [03] 0 - MDADD0: SDRAM0/1 burst Type. Fixed to sequential.
- * [02:00] 010 - MDBL0: SDRAM0/1 burst Length. Fixed to 4.
- */
-#define CONFIG_SYS_MDMRS_VAL 0x00020022
-
-/*
- * PCMCIA and CF Interfaces
- */
-#define CONFIG_SYS_MECR_VAL 0x00000000
-#define CONFIG_SYS_MCMEM0_VAL 0x00000000
-#define CONFIG_SYS_MCMEM1_VAL 0x00000000
-#define CONFIG_SYS_MCATT0_VAL 0x00000000
-#define CONFIG_SYS_MCATT1_VAL 0x00000000
-#define CONFIG_SYS_MCIO0_VAL 0x00000000
-#define CONFIG_SYS_MCIO1_VAL 0x00000000
-
-#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
-#define CONFIG_SYS_SXCNFG_VAL 0x00000000
-
-/*
-#define CSB226_USER_LED0 0x00000008
-#define CSB226_USER_LED1 0x00000010
-#define CSB226_USER_LED2 0x00000020
-*/
-
-/*
- * FLASH and environment organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sect. on one chip */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/integratorap.h b/include/configs/integratorap.h
index 61b8761..a1fdbb8 100644
--- a/include/configs/integratorap.h
+++ b/include/configs/integratorap.h
@@ -37,6 +37,7 @@
* High Level Configuration Options
* (easy to change)
*/
+#define CONFIG_SYS_TEXT_BASE 0x01000000
#define CONFIG_SYS_MEMTEST_START 0x100000
#define CONFIG_SYS_MEMTEST_END 0x10000000
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/integratorcp.h b/include/configs/integratorcp.h
index 7ae34b7..ccbdf44 100644
--- a/include/configs/integratorcp.h
+++ b/include/configs/integratorcp.h
@@ -37,6 +37,7 @@
* High Level Configuration Options
* (easy to change)
*/
+#define CONFIG_SYS_TEXT_BASE 0x01000000
#define CONFIG_SYS_MEMTEST_START 0x100000
#define CONFIG_SYS_MEMTEST_END 0x10000000
#define CONFIG_SYS_HZ 1000
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
new file mode 100644
index 0000000..d4bd207
--- /dev/null
+++ b/include/configs/m28evk.h
@@ -0,0 +1,303 @@
+/*
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef __M28_H__
+#define __M28_H__
+
+#include <asm/arch/regs-base.h>
+
+/*
+ * SoC configurations
+ */
+#define CONFIG_MX28 /* i.MX28 SoC */
+#define CONFIG_MXS_GPIO /* GPIO control */
+#define CONFIG_SYS_HZ 1000 /* Ticks per second */
+
+/*
+ * Define M28EVK machine type by hand until it lands in mach-types
+ */
+#define MACH_TYPE_M28EVK 3613
+
+#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_ARCH_MISC_INIT
+
+/*
+ * SPL
+ */
+#define CONFIG_SPL
+#define CONFIG_SPL_NO_CPU_SUPPORT_CODE
+#define CONFIG_SPL_START_S_PATH "board/denx/m28evk"
+#define CONFIG_SPL_LDSCRIPT "board/denx/m28evk/u-boot-spl.lds"
+
+/*
+ * U-Boot Commands
+ */
+#include <config_cmd_default.h>
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_USB
+
+/*
+ * Memory configurations
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
+#define PHYS_SDRAM_1 0x40000000 /* Base address */
+#define PHYS_SDRAM_1_SIZE 0x40000000 /* Max 1 GB RAM */
+#define CONFIG_STACKSIZE 0x00010000 /* 128 KB stack */
+#define CONFIG_SYS_MALLOC_LEN 0x00400000 /* 4 MB for malloc */
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Initial data */
+#define CONFIG_SYS_MEMTEST_START 0x40000000 /* Memtest start adr */
+#define CONFIG_SYS_MEMTEST_END 0x40400000 /* 4 MB RAM test */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+/* Point initial SP in SRAM so SPL can use it too. */
+#define CONFIG_SYS_INIT_SP_ADDR 0x00002000
+/*
+ * We need to sacrifice first 4 bytes of RAM here to avoid triggering some
+ * strange BUG in ROM corrupting first 4 bytes of RAM when loading U-Boot
+ * binary. In case there was more of this mess, 0x100 bytes are skipped.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x40000100
+
+/*
+ * U-Boot general configurations
+ */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
+#define CONFIG_SYS_PBSIZE \
+ (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+ /* Print buffer size */
+#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+ /* Boot argument buffer size */
+#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
+#define CONFIG_AUTO_COMPLETE /* Command auto complete */
+#define CONFIG_CMDLINE_EDITING /* Command history etc */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/*
+ * Serial Driver
+ */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK 24000000
+#define CONFIG_PL01x_PORTS { (void *)MXS_UARTDBG_BASE }
+#define CONFIG_CONS_INDEX 0
+#define CONFIG_BAUDRATE 115200 /* Default baud rate */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * MMC Driver
+ */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MXS_MMC
+#endif
+
+/*
+ * NAND
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_NAND_MXS
+#define CONFIG_APBH_DMA
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE 0x60000000
+#define CONFIG_SYS_NAND_5_ADDR_CYCLE
+#define NAND_MAX_CHIPS 8
+
+/* Environment is in NAND */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE (16 * 1024)
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_RANGE (512 * 1024)
+#define CONFIG_ENV_OFFSET 0x300000
+#define CONFIG_ENV_OFFSET_REDUND \
+ (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
+
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT "nand0=gpmi-nand.0"
+#define MTDPARTS_DEFAULT \
+ "mtdparts=gpmi-nand.0:" \
+ "3m(bootloader)ro," \
+ "512k(environment)," \
+ "512k(redundant-environment)," \
+ "4m(kernel)," \
+ "-(filesystem)"
+#endif
+
+/*
+ * Ethernet on SOC (FEC)
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_NET_MULTI
+#define CONFIG_ETHPRIME "FEC0"
+#define CONFIG_FEC_MXC
+#define CONFIG_FEC_MXC_MULTI
+#define CONFIG_MII
+#define CONFIG_DISCOVER_PHY
+#define CONFIG_FEC_XCV_TYPE RMII
+#endif
+
+/*
+ * I2C
+ */
+#ifdef CONFIG_CMD_I2C
+#define CONFIG_I2C_MXS
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED 400000
+#endif
+
+/*
+ * EEPROM
+ */
+#ifdef CONFIG_CMD_EEPROM
+#define CONFIG_SYS_I2C_MULTI_EEPROMS
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
+#endif
+
+/*
+ * RTC
+ */
+#ifdef CONFIG_CMD_DATE
+/* Use the internal RTC in the MXS chip */
+#define CONFIG_RTC_INTERNAL
+#ifdef CONFIG_RTC_INTERNAL
+#define CONFIG_RTC_MXS
+#else
+#define CONFIG_RTC_M41T62
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+#define CONFIG_SYS_M41T11_BASE_YEAR 2000
+#endif
+#endif
+
+/*
+ * USB
+ */
+#ifdef CONFIG_CMD_USB
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_MXS
+#define CONFIG_EHCI_MXS_PORT 1
+#define CONFIG_EHCI_IS_TDI
+#define CONFIG_USB_STORAGE
+#endif
+
+/*
+ * SPI
+ */
+#ifdef CONFIG_CMD_SPI
+#define CONFIG_HARD_SPI
+#define CONFIG_MXS_SPI
+#define CONFIG_SPI_HALF_DUPLEX
+#define CONFIG_DEFAULT_SPI_BUS 2
+#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
+
+/* SPI FLASH */
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_CS 2
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 24000000
+
+#define CONFIG_ENV_SPI_CS 0
+#define CONFIG_ENV_SPI_BUS 2
+#define CONFIG_ENV_SPI_MAX_HZ 24000000
+#define CONFIG_ENV_SPI_MODE SPI_MODE_0
+#endif
+#endif
+
+/*
+ * Boot Linux
+ */
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTFILE "uImage"
+#define CONFIG_BOOTARGS "console=ttyAM0,115200n8 "
+#define CONFIG_BOOTCOMMAND "run bootcmd_net"
+#define CONFIG_LOADADDR 0x42000000
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+/*
+ * Extra Environments
+ */
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "update_nand_full_filename=u-boot.nand\0" \
+ "update_nand_firmware_filename=u-boot.sb\0" \
+ "update_nand_firmware_maxsz=0x100000\0" \
+ "update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
+ "update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
+ "update_nand_get_fcb_size=" /* Get size of FCB blocks */ \
+ "nand device 0 ; " \
+ "nand info ; " \
+ "setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
+ "setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
+ "update_nand_full=" /* Update FCB, DBBT and FW */ \
+ "if tftp ${update_nand_full_filename} ; then " \
+ "run update_nand_get_fcb_size ; " \
+ "nand scrub -y 0x0 ${filesize} ; " \
+ "nand write.raw ${loadaddr} 0x0 ${update_nand_fcb} ; " \
+ "setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
+ "setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
+ "nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
+ "fi\0" \
+ "update_nand_firmware=" /* Update only firmware */ \
+ "if tftp ${update_nand_firmware_filename} ; then " \
+ "run update_nand_get_fcb_size ; " \
+ "setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
+ "setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \
+ "setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
+ "nand erase ${fcb_sz} ${fw_sz} ; " \
+ "nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
+ "nand write ${loadaddr} ${fw_off} ${filesize} ; " \
+ "fi\0"
+
+#endif /* __M28_H__ */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index ebb572e..15e40c5 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -215,7 +215,7 @@
"rdaddr=0x81000000\0" \
"usbtty=cdc_acm\0" \
"bootfile=uImage.beagle\0" \
- "console=ttyS2,115200n8\0" \
+ "console=tty02,115200n8\0" \
"mpurate=auto\0" \
"buddy=none "\
"optargs=\0" \
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index f535769..42a8f10 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -39,7 +39,7 @@
/* Get CPU defs */
#include <asm/arch/cpu.h>
-#include <asm/arch/omap4.h>
+#include <asm/arch/omap.h>
/* Display CPU and Board Info */
#define CONFIG_DISPLAY_CPUINFO 1
@@ -122,6 +122,9 @@
/* Flash */
#define CONFIG_SYS_NO_FLASH 1
+/* clocks */
+#define CONFIG_SYS_CLOCKS_ENABLE_ALL
+
/* commands to include */
#include <config_cmd_default.h>
@@ -278,4 +281,6 @@
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
+#define CONFIG_SYS_ENABLE_PADS_ALL
+
#endif /* __CONFIG_OMAP4_COMMON_H */
diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h
new file mode 100644
index 0000000..b763f01
--- /dev/null
+++ b/include/configs/omap5_evm.h
@@ -0,0 +1,284 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments Incorporated.
+ * Sricharan R <r.sricharan@ti.com>
+ *
+ * Derived from OMAP4 done by:
+ * Aneesh V <aneesh@ti.com>
+ *
+ * Configuration settings for the TI EVM5430 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */
+#define CONFIG_OMAP /* in a TI OMAP core */
+#define CONFIG_OMAP54XX /* which is a 54XX */
+#define CONFIG_OMAP5430 /* which is in a 5430 */
+#define CONFIG_5430EVM /* working with EVM */
+#define CONFIG_ARCH_CPU_INIT
+
+/* Get CPU defs */
+#include <asm/arch/cpu.h>
+#include <asm/arch/omap.h>
+
+/* Display CPU and Board Info */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Clock Defines */
+#define V_OSCK 38400000 /* Clock output from T2 */
+#define V_SCLK V_OSCK
+
+#undef CONFIG_USE_IRQ /* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_OF_LIBFDT
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+/*
+ * Size of malloc() pool
+ * Total Size Environment - 128k
+ * Malloc - add 256k
+ */
+#define CONFIG_ENV_SIZE (128 << 10)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10))
+/* Vector Base */
+#define CONFIG_SYS_CA9_VECTOR_BASE SRAM_ROM_VECT_BASE
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * serial port - NS16550 compatible
+ */
+#define V_NS16550_CLK 48000000
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 UART3_BASE
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
+ 115200}
+/* I2C */
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 1
+#define CONFIG_DRIVER_OMAP34XX_I2C
+#define CONFIG_I2C_MULTI_BUS
+
+/* TWL6030 */
+#define CONFIG_TWL6030_POWER
+#define CONFIG_CMD_BAT
+
+/* MMC */
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
+
+/* MMC ENV related defines */
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
+#define CONFIG_ENV_OFFSET 0xE0000
+
+/* USB */
+#define CONFIG_MUSB_UDC
+#define CONFIG_USB_OMAP3
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE
+#define CONFIG_USB_TTY
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* Flash */
+#define CONFIG_SYS_NO_FLASH
+
+/* Cache */
+#define CONFIG_SYS_CACHELINE_SIZE 64
+#define CONFIG_SYS_CACHELINE_SHIFT 6
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+/* Enabled commands */
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_SAVEENV
+
+/* Disabled commands */
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_IMLS /* List all found images */
+
+/*
+ * Environment setup
+ */
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_ENV_OVERWRITE
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x82000000\0" \
+ "console=ttyS2,115200n8\0" \
+ "usbtty=cdc_acm\0" \
+ "vram=16M\0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw\0" \
+ "mmcrootfstype=ext3 rootwait\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "vram=${vram} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
+ "source ${loadaddr}\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ "mmcboot=echo Booting from mmc${mmcdev} ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+
+#define CONFIG_BOOTCOMMAND \
+ "if mmc rescan ${mmcdev}; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "fi; " \
+ "fi; " \
+ "fi"
+
+#define CONFIG_AUTO_COMPLETE 1
+
+/*
+ * Miscellaneous configurable options
+ */
+
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "OMAP5430 EVM # "
+#define CONFIG_SYS_CBSIZE 256
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+
+/*
+ * memtest setup
+ */
+#define CONFIG_SYS_MEMTEST_START 0x80000000
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (32 << 20))
+
+/* Default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x80000000
+
+/* Use General purpose timer 1 */
+#define CONFIG_SYS_TIMERBASE GPT2_BASE
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128 << 10) /* Regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack */
+#endif
+
+/*
+ * SDRAM Memory Map
+ * Even though we use two CS all the memory
+ * is mapped to one contiguous block
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4030D800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+
+/* Defines for SDRAM init */
+#ifndef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+#define CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION
+#define CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS
+#endif
+
+/* Defines for SPL */
+#define CONFIG_SPL
+#define CONFIG_SPL_TEXT_BASE 0x40304350
+#define CONFIG_SPL_MAX_SIZE 0x1E000 /* 120K */
+#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
+
+#define CONFIG_SPL_BSS_START_ADDR 0x80000000
+#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
+
+#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */
+#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */
+#define CONFIG_SYS_MMC_SD_FAT_BOOT_PARTITION 1
+#define CONFIG_SPL_FAT_LOAD_PAYLOAD_NAME "u-boot.img"
+
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+#define CONFIG_SPL_LIBDISK_SUPPORT
+#define CONFIG_SPL_I2C_SUPPORT
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/omap-common/u-boot-spl.lds"
+
+/*
+ * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
+ * 64 bytes before this address should be set aside for u-boot.img's
+ * header. That is 0x800FFFC0--0x80100000 should not be used for any
+ * other needs.
+ */
+#define CONFIG_SYS_TEXT_BASE 0x80100000
+#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
+#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 89e17b8..55455e7 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -52,6 +52,9 @@
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CONFIG_SYS_TEXT_BASE 0
+#define MACH_TYPE_PM9261 1187
+#define CONFIG_MACH_TYPE MACH_TYPE_PM9261
+
/* clocks */
/* CKGR_MOR - enable main osc. */
#define CONFIG_SYS_MOR_VAL \
diff --git a/include/configs/pm9263.h b/include/configs/pm9263.h
index 1f7543c..43104a3 100644
--- a/include/configs/pm9263.h
+++ b/include/configs/pm9263.h
@@ -52,6 +52,9 @@
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CONFIG_SYS_TEXT_BASE 0
+#define MACH_TYPE_PM9263 1475
+#define CONFIG_MACH_TYPE MACH_TYPE_PM9263
+
/* clocks */
#define CONFIG_SYS_MOR_VAL \
(AT91_PMC_MOR_MOSCEN | \
diff --git a/include/configs/pm9g45.h b/include/configs/pm9g45.h
index acc1204..d3beaf3 100644
--- a/include/configs/pm9g45.h
+++ b/include/configs/pm9g45.h
@@ -41,6 +41,9 @@
#define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */
#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G45"
+#define MACH_TYPE_PM9G45 2672
+#define CONFIG_MACH_TYPE MACH_TYPE_PM9G45
+
/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
diff --git a/include/configs/vpac270.h b/include/configs/vpac270.h
index 9db4d99..dd68c66 100644
--- a/include/configs/vpac270.h
+++ b/include/configs/vpac270.h
@@ -107,7 +107,8 @@
*/
#ifdef CONFIG_CMD_MMC
#define CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_PXA_MMC_GENERIC
#define CONFIG_SYS_MMC_BASE 0xF0000000
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
diff --git a/include/onenand_uboot.h b/include/onenand_uboot.h
index 92279d5..f321d8a 100644
--- a/include/onenand_uboot.h
+++ b/include/onenand_uboot.h
@@ -52,4 +52,7 @@ extern int flexonenand_set_boundary(struct mtd_info *mtd, int die,
extern void s3c64xx_onenand_init(struct mtd_info *);
extern void s3c64xx_set_width_regs(struct onenand_chip *);
+/* SPL */
+void onenand_spl_load_image(uint32_t offs, uint32_t size, void *dst);
+
#endif /* __UBOOT_ONENAND_H */
diff --git a/spl/Makefile b/spl/Makefile
index c8317fa..6ac42a2 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -54,6 +54,7 @@ LIBS-$(CONFIG_SPL_FAT_SUPPORT) += fs/fat/libfat.o
LIBS-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/libgeneric.o
LIBS-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/libpower.o
LIBS-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/libnand.o
+LIBS-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/libonenand.o
LIBS-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/libdma.o
LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/memory.o
@@ -63,6 +64,9 @@ endif
ifeq ($(SOC),omap4)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
endif
+ifeq ($(SOC),omap5)
+LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
+endif
START := $(addprefix $(SPLTREE)/,$(START))
LIBS := $(addprefix $(SPLTREE)/,$(sort $(LIBS-y)))
diff --git a/tools/.gitignore b/tools/.gitignore
index 07f21a3..98a5c78 100644
--- a/tools/.gitignore
+++ b/tools/.gitignore
@@ -4,6 +4,7 @@
/img2srec
/mkimage
/mpc86x_clk
+/mxsboot
/ncb
/ncp
/ubsha1
diff --git a/tools/Makefile b/tools/Makefile
index df56a25..ca93156 100644
--- a/tools/Makefile
+++ b/tools/Makefile
@@ -67,6 +67,7 @@ BIN_FILES-$(CONFIG_CMD_NET) += gen_eth_addr$(SFX)
BIN_FILES-$(CONFIG_CMD_LOADS) += img2srec$(SFX)
BIN_FILES-$(CONFIG_XWAY_SWAP_BYTES) += xway-swap-bytes$(SFX)
BIN_FILES-y += mkimage$(SFX)
+BIN_FILES-$(CONFIG_MX28) += mxsboot$(SFX)
BIN_FILES-$(CONFIG_NETCONSOLE) += ncb$(SFX)
BIN_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1$(SFX)
@@ -91,6 +92,7 @@ NOPED_OBJ_FILES-y += kwbimage.o
NOPED_OBJ_FILES-y += imximage.o
NOPED_OBJ_FILES-y += omapimage.o
NOPED_OBJ_FILES-y += mkimage.o
+OBJ_FILES-$(CONFIG_MX28) += mxsboot.o
OBJ_FILES-$(CONFIG_NETCONSOLE) += ncb.o
NOPED_OBJ_FILES-y += os_support.o
OBJ_FILES-$(CONFIG_SHA1_CHECK_UB_IMG) += ubsha1.o
@@ -206,6 +208,10 @@ $(obj)mpc86x_clk$(SFX): $(obj)mpc86x_clk.o
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
$(HOSTSTRIP) $@
+$(obj)mxsboot$(SFX): $(obj)mxsboot.o
+ $(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
+ $(HOSTSTRIP) $@
+
$(obj)ncb$(SFX): $(obj)ncb.o
$(HOSTCC) $(HOSTCFLAGS) $(HOSTLDFLAGS) -o $@ $^
$(HOSTSTRIP) $@
diff --git a/tools/mxsboot.c b/tools/mxsboot.c
new file mode 100644
index 0000000..176753d
--- /dev/null
+++ b/tools/mxsboot.c
@@ -0,0 +1,684 @@
+/*
+ * Freescale i.MX28 image generator
+ *
+ * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
+ * on behalf of DENX Software Engineering GmbH
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <fcntl.h>
+#include <sys/stat.h>
+#include <sys/types.h>
+#include <unistd.h>
+
+#include "compiler.h"
+
+/*
+ * Default BCB layout.
+ *
+ * TWEAK this if you have blown any OCOTP fuses.
+ */
+#define STRIDE_PAGES 64
+#define STRIDE_COUNT 4
+
+/*
+ * Layout for 256Mb big NAND with 2048b page size, 64b OOB size and
+ * 128kb erase size.
+ *
+ * TWEAK this if you have different kind of NAND chip.
+ */
+uint32_t nand_writesize = 2048;
+uint32_t nand_oobsize = 64;
+uint32_t nand_erasesize = 128 * 1024;
+
+/*
+ * Sector on which the SigmaTel boot partition (0x53) starts.
+ */
+uint32_t sd_sector = 2048;
+
+/*
+ * Each of the U-Boot bootstreams is at maximum 1MB big.
+ *
+ * TWEAK this if, for some wild reason, you need to boot bigger image.
+ */
+#define MAX_BOOTSTREAM_SIZE (1 * 1024 * 1024)
+
+/* i.MX28 NAND controller-specific constants. DO NOT TWEAK! */
+#define MXS_NAND_DMA_DESCRIPTOR_COUNT 4
+#define MXS_NAND_CHUNK_DATA_CHUNK_SIZE 512
+#define MXS_NAND_METADATA_SIZE 10
+#define MXS_NAND_COMMAND_BUFFER_SIZE 32
+
+struct mx28_nand_fcb {
+ uint32_t checksum;
+ uint32_t fingerprint;
+ uint32_t version;
+ struct {
+ uint8_t data_setup;
+ uint8_t data_hold;
+ uint8_t address_setup;
+ uint8_t dsample_time;
+ uint8_t nand_timing_state;
+ uint8_t rea;
+ uint8_t rloh;
+ uint8_t rhoh;
+ } timing;
+ uint32_t page_data_size;
+ uint32_t total_page_size;
+ uint32_t sectors_per_block;
+ uint32_t number_of_nands; /* Ignored */
+ uint32_t total_internal_die; /* Ignored */
+ uint32_t cell_type; /* Ignored */
+ uint32_t ecc_block_n_ecc_type;
+ uint32_t ecc_block_0_size;
+ uint32_t ecc_block_n_size;
+ uint32_t ecc_block_0_ecc_type;
+ uint32_t metadata_bytes;
+ uint32_t num_ecc_blocks_per_page;
+ uint32_t ecc_block_n_ecc_level_sdk; /* Ignored */
+ uint32_t ecc_block_0_size_sdk; /* Ignored */
+ uint32_t ecc_block_n_size_sdk; /* Ignored */
+ uint32_t ecc_block_0_ecc_level_sdk; /* Ignored */
+ uint32_t num_ecc_blocks_per_page_sdk; /* Ignored */
+ uint32_t metadata_bytes_sdk; /* Ignored */
+ uint32_t erase_threshold;
+ uint32_t boot_patch;
+ uint32_t patch_sectors;
+ uint32_t firmware1_starting_sector;
+ uint32_t firmware2_starting_sector;
+ uint32_t sectors_in_firmware1;
+ uint32_t sectors_in_firmware2;
+ uint32_t dbbt_search_area_start_address;
+ uint32_t badblock_marker_byte;
+ uint32_t badblock_marker_start_bit;
+ uint32_t bb_marker_physical_offset;
+};
+
+struct mx28_nand_dbbt {
+ uint32_t checksum;
+ uint32_t fingerprint;
+ uint32_t version;
+ uint32_t number_bb;
+ uint32_t number_2k_pages_bb;
+};
+
+struct mx28_nand_bbt {
+ uint32_t nand;
+ uint32_t number_bb;
+ uint32_t badblock[510];
+};
+
+struct mx28_sd_drive_info {
+ uint32_t chip_num;
+ uint32_t drive_type;
+ uint32_t tag;
+ uint32_t first_sector_number;
+ uint32_t sector_count;
+};
+
+struct mx28_sd_config_block {
+ uint32_t signature;
+ uint32_t primary_boot_tag;
+ uint32_t secondary_boot_tag;
+ uint32_t num_copies;
+ struct mx28_sd_drive_info drv_info[1];
+};
+
+static inline uint32_t mx28_nand_ecc_size_in_bits(uint32_t ecc_strength)
+{
+ return ecc_strength * 13;
+}
+
+static inline uint32_t mx28_nand_get_ecc_strength(uint32_t page_data_size,
+ uint32_t page_oob_size)
+{
+ if (page_data_size == 2048)
+ return 8;
+
+ if (page_data_size == 4096) {
+ if (page_oob_size == 128)
+ return 8;
+
+ if (page_oob_size == 218)
+ return 16;
+ }
+
+ return 0;
+}
+
+static inline uint32_t mx28_nand_get_mark_offset(uint32_t page_data_size,
+ uint32_t ecc_strength)
+{
+ uint32_t chunk_data_size_in_bits;
+ uint32_t chunk_ecc_size_in_bits;
+ uint32_t chunk_total_size_in_bits;
+ uint32_t block_mark_chunk_number;
+ uint32_t block_mark_chunk_bit_offset;
+ uint32_t block_mark_bit_offset;
+
+ chunk_data_size_in_bits = MXS_NAND_CHUNK_DATA_CHUNK_SIZE * 8;
+ chunk_ecc_size_in_bits = mx28_nand_ecc_size_in_bits(ecc_strength);
+
+ chunk_total_size_in_bits =
+ chunk_data_size_in_bits + chunk_ecc_size_in_bits;
+
+ /* Compute the bit offset of the block mark within the physical page. */
+ block_mark_bit_offset = page_data_size * 8;
+
+ /* Subtract the metadata bits. */
+ block_mark_bit_offset -= MXS_NAND_METADATA_SIZE * 8;
+
+ /*
+ * Compute the chunk number (starting at zero) in which the block mark
+ * appears.
+ */
+ block_mark_chunk_number =
+ block_mark_bit_offset / chunk_total_size_in_bits;
+
+ /*
+ * Compute the bit offset of the block mark within its chunk, and
+ * validate it.
+ */
+ block_mark_chunk_bit_offset = block_mark_bit_offset -
+ (block_mark_chunk_number * chunk_total_size_in_bits);
+
+ if (block_mark_chunk_bit_offset > chunk_data_size_in_bits)
+ return 1;
+
+ /*
+ * Now that we know the chunk number in which the block mark appears,
+ * we can subtract all the ECC bits that appear before it.
+ */
+ block_mark_bit_offset -=
+ block_mark_chunk_number * chunk_ecc_size_in_bits;
+
+ return block_mark_bit_offset;
+}
+
+static inline uint32_t mx28_nand_mark_byte_offset(void)
+{
+ uint32_t ecc_strength;
+ ecc_strength = mx28_nand_get_ecc_strength(nand_writesize, nand_oobsize);
+ return mx28_nand_get_mark_offset(nand_writesize, ecc_strength) >> 3;
+}
+
+static inline uint32_t mx28_nand_mark_bit_offset(void)
+{
+ uint32_t ecc_strength;
+ ecc_strength = mx28_nand_get_ecc_strength(nand_writesize, nand_oobsize);
+ return mx28_nand_get_mark_offset(nand_writesize, ecc_strength) & 0x7;
+}
+
+static uint32_t mx28_nand_block_csum(uint8_t *block, uint32_t size)
+{
+ uint32_t csum = 0;
+ int i;
+
+ for (i = 0; i < size; i++)
+ csum += block[i];
+
+ return csum ^ 0xffffffff;
+}
+
+static struct mx28_nand_fcb *mx28_nand_get_fcb(uint32_t size)
+{
+ struct mx28_nand_fcb *fcb;
+ uint32_t bcb_size_bytes;
+ uint32_t stride_size_bytes;
+ uint32_t bootstream_size_pages;
+ uint32_t fw1_start_page;
+ uint32_t fw2_start_page;
+
+ fcb = malloc(nand_writesize);
+ if (!fcb) {
+ printf("MX28 NAND: Unable to allocate FCB\n");
+ return NULL;
+ }
+
+ memset(fcb, 0, nand_writesize);
+
+ fcb->fingerprint = 0x20424346;
+ fcb->version = 0x01000000;
+
+ /*
+ * FIXME: These here are default values as found in kobs-ng. We should
+ * probably retrieve the data from NAND or something.
+ */
+ fcb->timing.data_setup = 80;
+ fcb->timing.data_hold = 60;
+ fcb->timing.address_setup = 25;
+ fcb->timing.dsample_time = 6;
+
+ fcb->page_data_size = nand_writesize;
+ fcb->total_page_size = nand_writesize + nand_oobsize;
+ fcb->sectors_per_block = nand_erasesize / nand_writesize;
+
+ fcb->num_ecc_blocks_per_page = (nand_writesize / 512) - 1;
+ fcb->ecc_block_0_size = 512;
+ fcb->ecc_block_n_size = 512;
+ fcb->metadata_bytes = 10;
+
+ if (nand_writesize == 2048) {
+ fcb->ecc_block_n_ecc_type = 4;
+ fcb->ecc_block_0_ecc_type = 4;
+ } else if (nand_writesize == 4096) {
+ if (nand_oobsize == 128) {
+ fcb->ecc_block_n_ecc_type = 4;
+ fcb->ecc_block_0_ecc_type = 4;
+ } else if (nand_oobsize == 218) {
+ fcb->ecc_block_n_ecc_type = 8;
+ fcb->ecc_block_0_ecc_type = 8;
+ }
+ }
+
+ if (fcb->ecc_block_n_ecc_type == 0) {
+ printf("MX28 NAND: Unsupported NAND geometry\n");
+ goto err;
+ }
+
+ fcb->boot_patch = 0;
+ fcb->patch_sectors = 0;
+
+ fcb->badblock_marker_byte = mx28_nand_mark_byte_offset();
+ fcb->badblock_marker_start_bit = mx28_nand_mark_bit_offset();
+ fcb->bb_marker_physical_offset = nand_writesize;
+
+ stride_size_bytes = STRIDE_PAGES * nand_writesize;
+ bcb_size_bytes = stride_size_bytes * STRIDE_COUNT;
+
+ bootstream_size_pages = (size + (nand_writesize - 1)) /
+ nand_writesize;
+
+ fw1_start_page = 2 * bcb_size_bytes / nand_writesize;
+ fw2_start_page = (2 * bcb_size_bytes + MAX_BOOTSTREAM_SIZE) /
+ nand_writesize;
+
+ fcb->firmware1_starting_sector = fw1_start_page;
+ fcb->firmware2_starting_sector = fw2_start_page;
+ fcb->sectors_in_firmware1 = bootstream_size_pages;
+ fcb->sectors_in_firmware2 = bootstream_size_pages;
+
+ fcb->dbbt_search_area_start_address = STRIDE_PAGES * STRIDE_COUNT;
+
+ return fcb;
+
+err:
+ free(fcb);
+ return NULL;
+}
+
+static struct mx28_nand_dbbt *mx28_nand_get_dbbt(void)
+{
+ struct mx28_nand_dbbt *dbbt;
+
+ dbbt = malloc(nand_writesize);
+ if (!dbbt) {
+ printf("MX28 NAND: Unable to allocate DBBT\n");
+ return NULL;
+ }
+
+ memset(dbbt, 0, nand_writesize);
+
+ dbbt->fingerprint = 0x54424244;
+ dbbt->version = 0x1;
+
+ return dbbt;
+}
+
+static inline uint8_t mx28_nand_parity_13_8(const uint8_t b)
+{
+ uint32_t parity = 0, tmp;
+
+ tmp = ((b >> 6) ^ (b >> 5) ^ (b >> 3) ^ (b >> 2)) & 1;
+ parity |= tmp << 0;
+
+ tmp = ((b >> 7) ^ (b >> 5) ^ (b >> 4) ^ (b >> 2) ^ (b >> 1)) & 1;
+ parity |= tmp << 1;
+
+ tmp = ((b >> 7) ^ (b >> 6) ^ (b >> 5) ^ (b >> 1) ^ (b >> 0)) & 1;
+ parity |= tmp << 2;
+
+ tmp = ((b >> 7) ^ (b >> 4) ^ (b >> 3) ^ (b >> 0)) & 1;
+ parity |= tmp << 3;
+
+ tmp = ((b >> 6) ^ (b >> 4) ^ (b >> 3) ^
+ (b >> 2) ^ (b >> 1) ^ (b >> 0)) & 1;
+ parity |= tmp << 4;
+
+ return parity;
+}
+
+static uint8_t *mx28_nand_fcb_block(struct mx28_nand_fcb *fcb)
+{
+ uint8_t *block;
+ uint8_t *ecc;
+ int i;
+
+ block = malloc(nand_writesize + nand_oobsize);
+ if (!block) {
+ printf("MX28 NAND: Unable to allocate FCB block\n");
+ return NULL;
+ }
+
+ memset(block, 0, nand_writesize + nand_oobsize);
+
+ /* Update the FCB checksum */
+ fcb->checksum = mx28_nand_block_csum(((uint8_t *)fcb) + 4, 508);
+
+ /* Figure 12-11. in iMX28RM, rev. 1, says FCB is at offset 12 */
+ memcpy(block + 12, fcb, sizeof(struct mx28_nand_fcb));
+
+ /* ECC is at offset 12 + 512 */
+ ecc = block + 12 + 512;
+
+ /* Compute the ECC parity */
+ for (i = 0; i < sizeof(struct mx28_nand_fcb); i++)
+ ecc[i] = mx28_nand_parity_13_8(block[i + 12]);
+
+ return block;
+}
+
+static int mx28_nand_write_fcb(struct mx28_nand_fcb *fcb, char *buf)
+{
+ uint32_t offset;
+ uint8_t *fcbblock;
+ int ret = 0;
+ int i;
+
+ fcbblock = mx28_nand_fcb_block(fcb);
+ if (!fcbblock)
+ return -1;
+
+ for (i = 0; i < STRIDE_PAGES * STRIDE_COUNT; i += STRIDE_PAGES) {
+ offset = i * nand_writesize;
+ memcpy(buf + offset, fcbblock, nand_writesize + nand_oobsize);
+ }
+
+ free(fcbblock);
+ return ret;
+}
+
+static int mx28_nand_write_dbbt(struct mx28_nand_dbbt *dbbt, char *buf)
+{
+ uint32_t offset;
+ int i = STRIDE_PAGES * STRIDE_COUNT;
+
+ for (; i < 2 * STRIDE_PAGES * STRIDE_COUNT; i += STRIDE_PAGES) {
+ offset = i * nand_writesize;
+ memcpy(buf + offset, dbbt, sizeof(struct mx28_nand_dbbt));
+ }
+
+ return 0;
+}
+
+static int mx28_nand_write_firmware(struct mx28_nand_fcb *fcb, int infd,
+ char *buf)
+{
+ int ret;
+ off_t size;
+ uint32_t offset1, offset2;
+
+ size = lseek(infd, 0, SEEK_END);
+ lseek(infd, 0, SEEK_SET);
+
+ offset1 = fcb->firmware1_starting_sector * nand_writesize;
+ offset2 = fcb->firmware2_starting_sector * nand_writesize;
+
+ ret = read(infd, buf + offset1, size);
+ if (ret != size)
+ return -1;
+
+ memcpy(buf + offset2, buf + offset1, size);
+
+ return 0;
+}
+
+void usage(void)
+{
+ printf(
+ "Usage: mx28image [ops] <type> <infile> <outfile>\n"
+ "Augment BootStream file with a proper header for i.MX28 boot\n"
+ "\n"
+ " <type> type of image:\n"
+ " \"nand\" for NAND image\n"
+ " \"sd\" for SD image\n"
+ " <infile> input file, the u-boot.sb bootstream\n"
+ " <outfile> output file, the bootable image\n"
+ "\n");
+ printf(
+ "For NAND boot, these options are accepted:\n"
+ " -w <size> NAND page size\n"
+ " -o <size> NAND OOB size\n"
+ " -e <size> NAND erase size\n"
+ "\n"
+ "For SD boot, these options are accepted:\n"
+ " -p <sector> Sector where the SGTL partition starts\n"
+ );
+}
+
+static int mx28_create_nand_image(int infd, int outfd)
+{
+ struct mx28_nand_fcb *fcb;
+ struct mx28_nand_dbbt *dbbt;
+ int ret = -1;
+ char *buf;
+ int size;
+ ssize_t wr_size;
+
+ size = nand_writesize * 512 + 2 * MAX_BOOTSTREAM_SIZE;
+
+ buf = malloc(size);
+ if (!buf) {
+ printf("Can not allocate output buffer of %d bytes\n", size);
+ goto err0;
+ }
+
+ memset(buf, 0, size);
+
+ fcb = mx28_nand_get_fcb(MAX_BOOTSTREAM_SIZE);
+ if (!fcb) {
+ printf("Unable to compile FCB\n");
+ goto err1;
+ }
+
+ dbbt = mx28_nand_get_dbbt();
+ if (!dbbt) {
+ printf("Unable to compile DBBT\n");
+ goto err2;
+ }
+
+ ret = mx28_nand_write_fcb(fcb, buf);
+ if (ret) {
+ printf("Unable to write FCB to buffer\n");
+ goto err3;
+ }
+
+ ret = mx28_nand_write_dbbt(dbbt, buf);
+ if (ret) {
+ printf("Unable to write DBBT to buffer\n");
+ goto err3;
+ }
+
+ ret = mx28_nand_write_firmware(fcb, infd, buf);
+ if (ret) {
+ printf("Unable to write firmware to buffer\n");
+ goto err3;
+ }
+
+ wr_size = write(outfd, buf, size);
+ if (wr_size != size) {
+ ret = -1;
+ goto err3;
+ }
+
+ ret = 0;
+
+err3:
+ free(dbbt);
+err2:
+ free(fcb);
+err1:
+ free(buf);
+err0:
+ return ret;
+}
+
+static int mx28_create_sd_image(int infd, int outfd)
+{
+ int ret = -1;
+ uint32_t *buf;
+ int size;
+ off_t fsize;
+ ssize_t wr_size;
+ struct mx28_sd_config_block *cb;
+
+ fsize = lseek(infd, 0, SEEK_END);
+ lseek(infd, 0, SEEK_SET);
+ size = fsize + 512;
+
+ buf = malloc(size);
+ if (!buf) {
+ printf("Can not allocate output buffer of %d bytes\n", size);
+ goto err0;
+ }
+
+ ret = read(infd, (uint8_t *)buf + 512, fsize);
+ if (ret != fsize) {
+ ret = -1;
+ goto err1;
+ }
+
+ cb = (struct mx28_sd_config_block *)buf;
+
+ cb->signature = 0x00112233;
+ cb->primary_boot_tag = 0x1;
+ cb->secondary_boot_tag = 0x1;
+ cb->num_copies = 1;
+ cb->drv_info[0].chip_num = 0x0;
+ cb->drv_info[0].drive_type = 0x0;
+ cb->drv_info[0].tag = 0x1;
+ cb->drv_info[0].first_sector_number = sd_sector + 1;
+ cb->drv_info[0].sector_count = (size - 1) / 512;
+
+ wr_size = write(outfd, buf, size);
+ if (wr_size != size) {
+ ret = -1;
+ goto err1;
+ }
+
+ ret = 0;
+
+err1:
+ free(buf);
+err0:
+ return ret;
+}
+
+int parse_ops(int argc, char **argv)
+{
+ int i;
+ int tmp;
+ char *end;
+ enum param {
+ PARAM_WRITE,
+ PARAM_OOB,
+ PARAM_ERASE,
+ PARAM_PART,
+ PARAM_SD,
+ PARAM_NAND
+ };
+ int type;
+
+ for (i = 1; i < argc; i++) {
+ if (!strncmp(argv[i], "-w", 2))
+ type = PARAM_WRITE;
+ else if (!strncmp(argv[i], "-o", 2))
+ type = PARAM_OOB;
+ else if (!strncmp(argv[i], "-e", 2))
+ type = PARAM_ERASE;
+ else if (!strncmp(argv[i], "-p", 2))
+ type = PARAM_PART;
+ else /* SD/MMC */
+ break;
+
+ tmp = strtol(argv[++i], &end, 10);
+ if (tmp % 2)
+ return -1;
+ if (tmp <= 0)
+ return -1;
+
+ if (type == PARAM_WRITE)
+ nand_writesize = tmp;
+ if (type == PARAM_OOB)
+ nand_oobsize = tmp;
+ if (type == PARAM_ERASE)
+ nand_erasesize = tmp;
+ if (type == PARAM_PART)
+ sd_sector = tmp;
+ }
+
+ if (strcmp(argv[i], "sd") && strcmp(argv[i], "nand"))
+ return -1;
+
+ if (i + 3 != argc)
+ return -1;
+
+ return i;
+}
+
+int main(int argc, char **argv)
+{
+ int infd, outfd;
+ int ret = 0;
+ int offset;
+
+ offset = parse_ops(argc, argv);
+ if (offset < 0) {
+ usage();
+ ret = 1;
+ goto err1;
+ }
+
+ infd = open(argv[offset + 1], O_RDONLY);
+ if (infd < 0) {
+ printf("Input BootStream file can not be opened\n");
+ ret = 2;
+ goto err1;
+ }
+
+ outfd = open(argv[offset + 2], O_CREAT | O_TRUNC | O_WRONLY,
+ S_IRUSR | S_IWUSR);
+ if (outfd < 0) {
+ printf("Output file can not be created\n");
+ ret = 3;
+ goto err2;
+ }
+
+ if (!strcmp(argv[offset], "sd"))
+ ret = mx28_create_sd_image(infd, outfd);
+ else if (!strcmp(argv[offset], "nand"))
+ ret = mx28_create_nand_image(infd, outfd);
+
+ close(outfd);
+err2:
+ close(infd);
+err1:
+ return ret;
+}