diff options
| -rw-r--r-- | MAINTAINERS | 1 | ||||
| -rw-r--r-- | board/samsung/origen/Makefile | 46 | ||||
| -rw-r--r-- | board/samsung/origen/lowlevel_init.S | 357 | ||||
| -rw-r--r-- | board/samsung/origen/mem_setup.S | 421 | ||||
| -rw-r--r-- | board/samsung/origen/origen.c | 109 | ||||
| -rw-r--r-- | board/samsung/origen/origen_setup.h | 546 | ||||
| -rw-r--r-- | boards.cfg | 1 | ||||
| -rw-r--r-- | include/configs/origen.h | 160 |
8 files changed, 1641 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 09fa789..84faea2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -707,6 +707,7 @@ Minkyu Kang <mk7.kang@samsung.com> Chander Kashyap <k.chander@samsung.com> + origen ARM ARMV7 (S5PC210 SoC) SMDKV310 ARM ARMV7 (S5PC210 SoC) Torsten Koschorrek <koschorrek@synertronixx.de> diff --git a/board/samsung/origen/Makefile b/board/samsung/origen/Makefile new file mode 100644 index 0000000..65eff91 --- /dev/null +++ b/board/samsung/origen/Makefile @@ -0,0 +1,46 @@ +# +# Copyright (C) 2011 Samsung Electronics +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +SOBJS := mem_setup.o +SOBJS += lowlevel_init.o +COBJS += origen.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +all: $(obj).depend $(LIB) + +$(LIB): $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S new file mode 100644 index 0000000..ddca1e2 --- /dev/null +++ b/board/samsung/origen/lowlevel_init.S @@ -0,0 +1,357 @@ +/* + * Lowlevel setup for ORIGEN board based on S5PV310 + * + * Copyright (C) 2011 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> +#include "origen_setup.h" +/* + * Register usages: + * + * r5 has zero always + * r7 has GPIO part1 base 0x11400000 + * r6 has GPIO part2 base 0x11000000 + */ + +_TEXT_BASE: + .word CONFIG_SYS_TEXT_BASE + + .globl lowlevel_init +lowlevel_init: + push {lr} + + /* r5 has always zero */ + mov r5, #0 + ldr r7, =S5PC210_GPIO_PART1_BASE + ldr r6, =S5PC210_GPIO_PART2_BASE + + /* check reset status */ + ldr r0, =(S5PC210_POWER_BASE + INFORM1_OFFSET) + ldr r1, [r0] + + /* AFTR wakeup reset */ + ldr r2, =S5P_CHECK_DIDLE + cmp r1, r2 + beq exit_wakeup + + /* LPA wakeup reset */ + ldr r2, =S5P_CHECK_LPA + cmp r1, r2 + beq exit_wakeup + + /* Sleep wakeup reset */ + ldr r2, =S5P_CHECK_SLEEP + cmp r1, r2 + beq wakeup_reset + + /* + * If U-boot is already running in ram, no need to relocate U-Boot. + * Memory controller must be configured before relocating U-Boot + * in ram. + */ + ldr r0, =0x0ffffff /* r0 <- Mask Bits*/ + bic r1, pc, r0 /* pc <- current addr of code */ + /* r1 <- unmasked bits of pc */ + ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ + bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ + cmp r1, r2 /* compare r1, r2 */ + beq 1f /* r0 == r1 then skip sdram init */ + + /* init system clock */ + bl system_clock_init + + /* Memory initialize */ + bl mem_ctrl_asm_init + +1: + /* for UART */ + bl uart_asm_init + bl tzpc_init + pop {pc} + +wakeup_reset: + bl system_clock_init + bl mem_ctrl_asm_init + bl tzpc_init + +exit_wakeup: + /* Load return address and jump to kernel */ + ldr r0, =(S5PC210_POWER_BASE + INFORM0_OFFSET) + + /* r1 = physical address of s5pc210_cpu_resume function */ + ldr r1, [r0] + + /* Jump to kernel*/ + mov pc, r1 + nop + nop + +/* + * system_clock_init: Initialize core clock and bus clock. + * void system_clock_init(void) + */ +system_clock_init: + push {lr} + ldr r0, =S5PC210_CLOCK_BASE + + /* APLL(1), MPLL(1), CORE(0), HPM(0) */ + ldr r1, =CLK_SRC_CPU_VAL + ldr r2, =CLK_SRC_CPU_OFFSET + str r1, [r0, r2] + + /* wait ?us */ + mov r1, #0x10000 +2: subs r1, r1, #1 + bne 2b + + ldr r1, =CLK_SRC_TOP0_VAL + ldr r2, =CLK_SRC_TOP0_OFFSET + str r1, [r0, r2] + + ldr r1, =CLK_SRC_TOP1_VAL + ldr r2, =CLK_SRC_TOP1_OFFSET + str r1, [r0, r2] + + /* DMC */ + ldr r1, =CLK_SRC_DMC_VAL + ldr r2, =CLK_SRC_DMC_OFFSET + str r1, [r0, r2] + + /*CLK_SRC_LEFTBUS */ + ldr r1, =CLK_SRC_LEFTBUS_VAL + ldr r2, =CLK_SRC_LEFTBUS_OFFSET + str r1, [r0, r2] + + /*CLK_SRC_RIGHTBUS */ + ldr r1, =CLK_SRC_RIGHTBUS_VAL + ldr r2, =CLK_SRC_RIGHTBUS_OFFSET + str r1, [r0, r2] + + /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */ + ldr r1, =CLK_SRC_FSYS_VAL + ldr r2, =CLK_SRC_FSYS_OFFSET + str r1, [r0, r2] + + /* UART[0:4] */ + ldr r1, =CLK_SRC_PERIL0_VAL + ldr r2, =CLK_SRC_PERIL0_OFFSET + str r1, [r0, r2] + + /* wait ?us */ + mov r1, #0x10000 +3: subs r1, r1, #1 + bne 3b + + /* CLK_DIV_CPU0 */ + ldr r1, =CLK_DIV_CPU0_VAL + ldr r2, =CLK_DIV_CPU0_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_CPU1 */ + ldr r1, =CLK_DIV_CPU1_VAL + ldr r2, =CLK_DIV_CPU1_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_DMC0 */ + ldr r1, =CLK_DIV_DMC0_VAL + ldr r2, =CLK_DIV_DMC0_OFFSET + str r1, [r0, r2] + + /*CLK_DIV_DMC1 */ + ldr r1, =CLK_DIV_DMC1_VAL + ldr r2, =CLK_DIV_DMC1_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_LEFTBUS */ + ldr r1, =CLK_DIV_LEFTBUS_VAL + ldr r2, =CLK_DIV_LEFTBUS_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_RIGHTBUS */ + ldr r1, =CLK_DIV_RIGHTBUS_VAL + ldr r2, =CLK_DIV_RIGHTBUS_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_TOP */ + ldr r1, =CLK_DIV_TOP_VAL + ldr r2, =CLK_DIV_TOP_OFFSET + str r1, [r0, r2] + + /* MMC[0:1] */ + ldr r1, =CLK_DIV_FSYS1_VAL /* 800(MPLL) / (15 + 1) */ + ldr r2, =CLK_DIV_FSYS1_OFFSET + str r1, [r0, r2] + + /* MMC[2:3] */ + ldr r1, =CLK_DIV_FSYS2_VAL /* 800(MPLL) / (15 + 1) */ + ldr r2, =CLK_DIV_FSYS2_OFFSET + str r1, [r0, r2] + + /* MMC4 */ + ldr r1, =CLK_DIV_FSYS3_VAL /* 800(MPLL) / (15 + 1) */ + ldr r2, =CLK_DIV_FSYS3_OFFSET + str r1, [r0, r2] + + /* CLK_DIV_PERIL0: UART Clock Divisors */ + ldr r1, =CLK_DIV_PERIL0_VAL + ldr r2, =CLK_DIV_PERIL0_OFFSET + str r1, [r0, r2] + + /* Set PLL locktime */ + ldr r1, =PLL_LOCKTIME + ldr r2, =APLL_LOCK_OFFSET + str r1, [r0, r2] + + ldr r1, =PLL_LOCKTIME + ldr r2, =MPLL_LOCK_OFFSET + str r1, [r0, r2] + + ldr r1, =PLL_LOCKTIME + ldr r2, =EPLL_LOCK_OFFSET + str r1, [r0, r2] + + ldr r1, =PLL_LOCKTIME + ldr r2, =VPLL_LOCK_OFFSET + str r1, [r0, r2] + + /* APLL_CON1 */ + ldr r1, =APLL_CON1_VAL + ldr r2, =APLL_CON1_OFFSET + str r1, [r0, r2] + + /* APLL_CON0 */ + ldr r1, =APLL_CON0_VAL + ldr r2, =APLL_CON0_OFFSET + str r1, [r0, r2] + + /* MPLL_CON1 */ + ldr r1, =MPLL_CON1_VAL + ldr r2, =MPLL_CON1_OFFSET + str r1, [r0, r2] + + /* MPLL_CON0 */ + ldr r1, =MPLL_CON0_VAL + ldr r2, =MPLL_CON0_OFFSET + str r1, [r0, r2] + + /* EPLL */ + ldr r1, =EPLL_CON1_VAL + ldr r2, =EPLL_CON1_OFFSET + str r1, [r0, r2] + + /* EPLL_CON0 */ + ldr r1, =EPLL_CON0_VAL + ldr r2, =EPLL_CON0_OFFSET + str r1, [r0, r2] + + /* VPLL_CON1 */ + ldr r1, =VPLL_CON1_VAL + ldr r2, =VPLL_CON1_OFFSET + str r1, [r0, r2] + + /* VPLL_CON0 */ + ldr r1, =VPLL_CON0_VAL + ldr r2, =VPLL_CON0_OFFSET + str r1, [r0, r2] + + /* wait ?us */ + mov r1, #0x30000 +4: subs r1, r1, #1 + bne 4b + + pop {pc} +/* + * uart_asm_init: Initialize UART in asm mode, 115200bps fixed. + * void uart_asm_init(void) + */ + .globl uart_asm_init +uart_asm_init: + + /* setup UART0-UART3 GPIOs (part1) */ + mov r0, r7 + ldr r1, =S5PC210_GPIO_A0_CON_VAL + str r1, [r0, #S5PC210_GPIO_A0_CON_OFFSET] + ldr r1, =S5PC210_GPIO_A1_CON_VAL + str r1, [r0, #S5PC210_GPIO_A1_CON_OFFSET] + + ldr r0, =S5PC210_UART_BASE + add r0, r0, #S5PC210_DEFAULT_UART_OFFSET + + ldr r1, =ULCON_VAL + str r1, [r0, #ULCON_OFFSET] + ldr r1, =UCON_VAL + str r1, [r0, #UCON_OFFSET] + ldr r1, =UFCON_VAL + str r1, [r0, #UFCON_OFFSET] + ldr r1, =UBRDIV_VAL + str r1, [r0, #UBRDIV_OFFSET] + ldr r1, =UFRACVAL_VAL + str r1, [r0, #UFRACVAL_OFFSET] + mov pc, lr + nop + nop + nop + +/* Setting TZPC[TrustZone Protection Controller] */ +tzpc_init: + ldr r0, =TZPC0_BASE + mov r1, #R0SIZE + str r1, [r0] + mov r1, #DECPROTXSET + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC1_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC2_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC3_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC4_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + ldr r0, =TZPC5_BASE + str r1, [r0, #TZPC_DECPROT0SET_OFFSET] + str r1, [r0, #TZPC_DECPROT1SET_OFFSET] + str r1, [r0, #TZPC_DECPROT2SET_OFFSET] + str r1, [r0, #TZPC_DECPROT3SET_OFFSET] + + mov pc, lr diff --git a/board/samsung/origen/mem_setup.S b/board/samsung/origen/mem_setup.S new file mode 100644 index 0000000..a798848 --- /dev/null +++ b/board/samsung/origen/mem_setup.S @@ -0,0 +1,421 @@ +/* + * Memory setup for ORIGEN board based on S5PV310 + * + * Copyright (C) 2011 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include "origen_setup.h" +#define SET_MIU + + .globl mem_ctrl_asm_init +mem_ctrl_asm_init: + /* + * Async bridge configuration at CPU_core: + * 1: half_sync + * 0: full_sync + */ + ldr r0, =ASYNC_CONFIG + mov r1, #1 + str r1, [r0] + +#ifdef SET_MIU + ldr r0, =S5PC210_MIU_BASE + /* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */ + ldr r1, =0x20001507 + str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET] + + /* Update MIU Configuration */ + ldr r1, =0x00000001 + str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET] +#endif + /* DREX0 */ + ldr r0, =S5PC210_DMC0_BASE + + /* + * DLL Parameter Setting: + * Termination: Enable R/W + * Phase Delay for DQS Cleaning: 180' Shift + */ + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* + * ZQ Calibration + * Termination: Disable + * Auto Calibration Start: Enable + */ + ldr r1, =0xE3855703 + str r1, [r0, #DMC_PHYZQCONTROL] + + /* Wait ?us*/ + mov r2, #0x100000 +1: subs r2, r2, #1 + bne 1b + + /* + * Update DLL Information: + * Force DLL Resyncronization + */ + ldr r1, =0xe000008e + str r1, [r0, #DMC_PHYCONTROL1] + + /* Reset Force DLL Resyncronization */ + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* Enable Differential DQS, DLL Off*/ + ldr r1, =0x71101008 + str r1, [r0, #DMC_PHYCONTROL0] + + /* Activate PHY DLL: DLL On */ + ldr r1, =0x7110100A + str r1, [r0, #DMC_PHYCONTROL0] + + /* Set DLL Parameters */ + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* DLL Start */ + ldr r1, =0x7110100B + str r1, [r0, #DMC_PHYCONTROL0] + + ldr r1, =0x00000000 + str r1, [r0, #DMC_PHYCONTROL2] + + /* Set Clock Ratio of Bus clock to Memory Clock */ + ldr r1, =0x0FFF301a + str r1, [r0, #DMC_CONCONTROL] + + /* + * Memor Burst length: 8 + * Number of chips: 2 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 1 Cycle + */ + ldr r1, =0x00312640 + str r1, [r0, #DMC_MEMCONTROL] + + /* + * Memory Configuration Chip 0 + * Address Mapping: Interleaved + * Number of Column address Bits: 10 bits + * Number of Rows Address Bits: 14 + * Number of Banks: 8 + */ + ldr r1, =0x20e01323 + str r1, [r0, #DMC_MEMCONFIG0] + + /* + * Memory Configuration Chip 1 + * Address Mapping: Interleaved + * Number of Column address Bits: 10 bits + * Number of Rows Address Bits: 14 + * Number of Banks: 8 + */ + ldr r1, =0x40e01323 + str r1, [r0, #DMC_MEMCONFIG1] + + /* Config Precharge Policy */ + ldr r1, =0xff000000 + str r1, [r0, #DMC_PRECHCONFIG] + + /* + * TimingAref, TimingRow, TimingData, TimingPower Setting: + * Values as per Memory AC Parameters + */ + ldr r1, =0x000000BB + str r1, [r0, #DMC_TIMINGAREF] + ldr r1, =0x4046654f + str r1, [r0, #DMC_TIMINGROW] + ldr r1, =0x46400506 + str r1, [r0, #DMC_TIMINGDATA] + ldr r1, =0x52000A3C + str r1, [r0, #DMC_TIMINGPOWER] + + /* Chip0: NOP Command: Assert and Hold CKE to high level */ + ldr r1, =0x07000000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +2: subs r2, r2, #1 + bne 2b + + /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ + ldr r1, =0x00020000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00030000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00010002 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00000328 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +3: subs r2, r2, #1 + bne 3b + + /* Chip0: ZQINIT */ + ldr r1, =0x0a000000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +4: subs r2, r2, #1 + bne 4b + + /* Chip1: NOP Command: Assert and Hold CKE to high level */ + ldr r1, =0x07100000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +5: subs r2, r2, #1 + bne 5b + + /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ + ldr r1, =0x00120000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00130000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00110002 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00100328 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +6: subs r2, r2, #1 + bne 6b + + /* Chip1: ZQINIT */ + ldr r1, =0x0a100000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +7: subs r2, r2, #1 + bne 7b + + ldr r1, =0xe000008e + str r1, [r0, #DMC_PHYCONTROL1] + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* Wait ?us*/ + mov r2, #0x100000 +8: subs r2, r2, #1 + bne 8b + + /* DREX1 */ + ldr r0, =S5PC210_DMC1_BASE @0x10410000 + + /* + * DLL Parameter Setting: + * Termination: Enable R/W + * Phase Delay for DQS Cleaning: 180' Shift + */ + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* + * ZQ Calibration: + * Termination: Disable + * Auto Calibration Start: Enable + */ + ldr r1, =0xE3855703 + str r1, [r0, #DMC_PHYZQCONTROL] + + /* Wait ?us*/ + mov r2, #0x100000 +1: subs r2, r2, #1 + bne 1b + + /* + * Update DLL Information: + * Force DLL Resyncronization + */ + ldr r1, =0xe000008e + str r1, [r0, #DMC_PHYCONTROL1] + + /* Reset Force DLL Resyncronization */ + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* Enable Differential DQS, DLL Off*/ + ldr r1, =0x71101008 + str r1, [r0, #DMC_PHYCONTROL0] + + /* Activate PHY DLL: DLL On */ + ldr r1, =0x7110100A + str r1, [r0, #DMC_PHYCONTROL0] + + /* Set DLL Parameters */ + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* DLL Start */ + ldr r1, =0x7110100B + str r1, [r0, #DMC_PHYCONTROL0] + + ldr r1, =0x00000000 + str r1, [r0, #DMC_PHYCONTROL2] + + /* Set Clock Ratio of Bus clock to Memory Clock */ + ldr r1, =0x0FFF301a + str r1, [r0, #DMC_CONCONTROL] + + /* + * Memor Burst length: 8 + * Number of chips: 2 + * Memory Bus width: 32 bit + * Memory Type: DDR3 + * Additional Latancy for PLL: 1 Cycle + */ + ldr r1, =0x00312640 + str r1, [r0, #DMC_MEMCONTROL] + + /* + * Memory Configuration Chip 0 + * Address Mapping: Interleaved + * Number of Column address Bits: 10 bits + * Number of Rows Address Bits: 14 + * Number of Banks: 8 + */ + ldr r1, =0x20e01323 + str r1, [r0, #DMC_MEMCONFIG0] + + /* + * Memory Configuration Chip 1 + * Address Mapping: Interleaved + * Number of Column address Bits: 10 bits + * Number of Rows Address Bits: 14 + * Number of Banks: 8 + */ + ldr r1, =0x40e01323 + str r1, [r0, #DMC_MEMCONFIG1] + + /* Config Precharge Policy */ + ldr r1, =0xff000000 + str r1, [r0, #DMC_PRECHCONFIG] + + /* + * TimingAref, TimingRow, TimingData, TimingPower Setting: + * Values as per Memory AC Parameters + */ + ldr r1, =0x000000BB + str r1, [r0, #DMC_TIMINGAREF] + ldr r1, =0x4046654f + str r1, [r0, #DMC_TIMINGROW] + ldr r1, =0x46400506 + str r1, [r0, #DMC_TIMINGDATA] + ldr r1, =0x52000A3C + str r1, [r0, #DMC_TIMINGPOWER] + + /* Chip0: NOP Command: Assert and Hold CKE to high level */ + ldr r1, =0x07000000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +2: subs r2, r2, #1 + bne 2b + + /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ + ldr r1, =0x00020000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00030000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00010002 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00000328 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +3: subs r2, r2, #1 + bne 3b + + /* Chip 0: ZQINIT */ + ldr r1, =0x0a000000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +4: subs r2, r2, #1 + bne 4b + + /* Chip1: NOP Command: Assert and Hold CKE to high level */ + ldr r1, =0x07100000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +5: subs r2, r2, #1 + bne 5b + + /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ + ldr r1, =0x00120000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00130000 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00110002 + str r1, [r0, #DMC_DIRECTCMD] + ldr r1, =0x00100328 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +6: subs r2, r2, #1 + bne 6b + + /* Chip1: ZQINIT */ + ldr r1, =0x0a100000 + str r1, [r0, #DMC_DIRECTCMD] + + /* Wait ?us*/ + mov r2, #0x100000 +7: subs r2, r2, #1 + bne 7b + + ldr r1, =0xe000008e + str r1, [r0, #DMC_PHYCONTROL1] + ldr r1, =0xe0000086 + str r1, [r0, #DMC_PHYCONTROL1] + + /* Wait ?us*/ + mov r2, #0x100000 +8: subs r2, r2, #1 + bne 8b + + /* turn on DREX0, DREX1 */ + ldr r0, =S5PC210_DMC0_BASE + ldr r1, =0x0FFF303a + str r1, [r0, #DMC_CONCONTROL] + + ldr r0, =S5PC210_DMC1_BASE + ldr r1, =0x0FFF303a + str r1, [r0, #DMC_CONCONTROL] + + mov pc, lr diff --git a/board/samsung/origen/origen.c b/board/samsung/origen/origen.c new file mode 100644 index 0000000..8882646 --- /dev/null +++ b/board/samsung/origen/origen.c @@ -0,0 +1,109 @@ +/* + * Copyright (C) 2011 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/cpu.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc.h> + +DECLARE_GLOBAL_DATA_PTR; +struct s5pc210_gpio_part1 *gpio1; +struct s5pc210_gpio_part2 *gpio2; + +int board_init(void) +{ + gpio1 = (struct s5pc210_gpio_part1 *) S5PC210_GPIO_PART1_BASE; + gpio2 = (struct s5pc210_gpio_part2 *) S5PC210_GPIO_PART2_BASE; + + gd->bd->bi_boot_params = (PHYS_SDRAM_1 + 0x100UL); + return 0; +} + +int dram_init(void) +{ + gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) + + get_ram_size((long *)PHYS_SDRAM_2, PHYS_SDRAM_2_SIZE) + + get_ram_size((long *)PHYS_SDRAM_3, PHYS_SDRAM_3_SIZE) + + get_ram_size((long *)PHYS_SDRAM_4, PHYS_SDRAM_4_SIZE); + + return 0; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, \ + PHYS_SDRAM_1_SIZE); + gd->bd->bi_dram[1].start = PHYS_SDRAM_2; + gd->bd->bi_dram[1].size = get_ram_size((long *)PHYS_SDRAM_2, \ + PHYS_SDRAM_2_SIZE); + gd->bd->bi_dram[2].start = PHYS_SDRAM_3; + gd->bd->bi_dram[2].size = get_ram_size((long *)PHYS_SDRAM_3, \ + PHYS_SDRAM_3_SIZE); + gd->bd->bi_dram[3].start = PHYS_SDRAM_4; + gd->bd->bi_dram[3].size = get_ram_size((long *)PHYS_SDRAM_4, \ + PHYS_SDRAM_4_SIZE); +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + printf("\nBoard: ORIGEN\n"); + return 0; +} +#endif + +#ifdef CONFIG_GENERIC_MMC +int board_mmc_init(bd_t *bis) +{ + int i, err; + + /* + * MMC2 SD card GPIO: + * + * GPK2[0] SD_2_CLK(2) + * GPK2[1] SD_2_CMD(2) + * GPK2[2] SD_2_CDn + * GPK2[3:6] SD_2_DATA[0:3](2) + */ + for (i = 0; i < 7; i++) { + /* GPK2[0:6] special function 2 */ + s5p_gpio_cfg_pin(&gpio2->k2, i, GPIO_FUNC(0x2)); + + /* GPK2[0:6] drv 4x */ + s5p_gpio_set_drv(&gpio2->k2, i, GPIO_DRV_4X); + + /* GPK2[0:1] pull disable */ + if (i == 0 || i == 1) { + s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_NONE); + continue; + } + + /* GPK2[2:6] pull up */ + s5p_gpio_set_pull(&gpio2->k2, i, GPIO_PULL_UP); + } + + err = s5p_mmc_init(2, 4); + return err; +} +#endif diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h new file mode 100644 index 0000000..63d85d8 --- /dev/null +++ b/board/samsung/origen/origen_setup.h @@ -0,0 +1,546 @@ +/* + * Machine Specific Values for ORIGEN board based on S5PV310 + * + * Copyright (C) 2011 Samsung Electronics + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ORIGEN_SETUP_H +#define _ORIGEN_SETUP_H + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> + +/* Offsets of clock registers (sources and dividers) */ +#define CLK_SRC_CPU_OFFSET 0x14200 +#define CLK_DIV_CPU0_OFFSET 0x14500 +#define CLK_DIV_CPU1_OFFSET 0x14504 + +#define CLK_SRC_DMC_OFFSET 0x10200 +#define CLK_DIV_DMC0_OFFSET 0x10500 +#define CLK_DIV_DMC1_OFFSET 0x10504 + +#define CLK_SRC_TOP0_OFFSET 0xC210 +#define CLK_SRC_TOP1_OFFSET 0xC214 +#define CLK_DIV_TOP_OFFSET 0xC510 + +#define CLK_SRC_LEFTBUS_OFFSET 0x4200 +#define CLK_DIV_LEFTBUS_OFFSET 0x4500 + +#define CLK_SRC_RIGHTBUS_OFFSET 0x8200 +#define CLK_DIV_RIGHTBUS_OFFSET 0x8500 + +#define CLK_SRC_FSYS_OFFSET 0xC240 +#define CLK_DIV_FSYS1_OFFSET 0xC544 +#define CLK_DIV_FSYS2_OFFSET 0xC548 +#define CLK_DIV_FSYS3_OFFSET 0xC54C + +#define CLK_SRC_PERIL0_OFFSET 0xC250 +#define CLK_DIV_PERIL0_OFFSET 0xC550 + +#define APLL_LOCK_OFFSET 0x14000 +#define MPLL_LOCK_OFFSET 0x14008 +#define APLL_CON0_OFFSET 0x14100 +#define APLL_CON1_OFFSET 0x14104 +#define MPLL_CON0_OFFSET 0x14108 +#define MPLL_CON1_OFFSET 0x1410C + +#define EPLL_LOCK_OFFSET 0xC010 +#define VPLL_LOCK_OFFSET 0xC020 +#define EPLL_CON0_OFFSET 0xC110 +#define EPLL_CON1_OFFSET 0xC114 +#define VPLL_CON0_OFFSET 0xC120 +#define VPLL_CON1_OFFSET 0xC124 + +/* DMC: DRAM Controllor Register offsets */ +#define DMC_CONCONTROL 0x00 +#define DMC_MEMCONTROL 0x04 +#define DMC_MEMCONFIG0 0x08 +#define DMC_MEMCONFIG1 0x0C +#define DMC_DIRECTCMD 0x10 +#define DMC_PRECHCONFIG 0x14 +#define DMC_PHYCONTROL0 0x18 +#define DMC_PHYCONTROL1 0x1C +#define DMC_PHYCONTROL2 0x20 +#define DMC_TIMINGAREF 0x30 +#define DMC_TIMINGROW 0x34 +#define DMC_TIMINGDATA 0x38 +#define DMC_TIMINGPOWER 0x3C +#define DMC_PHYZQCONTROL 0x44 + +/* Bus Configuration Register Address */ +#define ASYNC_CONFIG 0x10010350 + +/* MIU Config Register Offsets*/ +#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400 +#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00 + +/* Offset for inform registers */ +#define INFORM0_OFFSET 0x800 +#define INFORM1_OFFSET 0x804 + +/* GPIO Offsets for UART: GPIO Contol Register */ +#define S5PC210_GPIO_A0_CON_OFFSET 0x00 +#define S5PC210_GPIO_A1_CON_OFFSET 0x20 + +/* UART Register offsets */ +#define ULCON_OFFSET 0x00 +#define UCON_OFFSET 0x04 +#define UFCON_OFFSET 0x08 +#define UBRDIV_OFFSET 0x28 +#define UFRACVAL_OFFSET 0x2C + +/* TZPC : Register Offsets */ +#define TZPC0_BASE 0x10110000 +#define TZPC1_BASE 0x10120000 +#define TZPC2_BASE 0x10130000 +#define TZPC3_BASE 0x10140000 +#define TZPC4_BASE 0x10150000 +#define TZPC5_BASE 0x10160000 + +#define TZPC_DECPROT0SET_OFFSET 0x804 +#define TZPC_DECPROT1SET_OFFSET 0x810 +#define TZPC_DECPROT2SET_OFFSET 0x81C +#define TZPC_DECPROT3SET_OFFSET 0x828 + +/* CLK_SRC_CPU */ +#define MUX_HPM_SEL_MOUTAPLL 0x0 +#define MUX_HPM_SEL_SCLKMPLL 0x1 +#define MUX_CORE_SEL_MOUTAPLL 0x0 +#define MUX_CORE_SEL_SCLKMPLL 0x1 +#define MUX_MPLL_SEL_FILPLL 0x0 +#define MUX_MPLL_SEL_MOUTMPLLFOUT 0x1 +#define MUX_APLL_SEL_FILPLL 0x0 +#define MUX_APLL_SEL_MOUTMPLLFOUT 0x1 +#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL_MOUTAPLL << 20) \ + | (MUX_CORE_SEL_MOUTAPLL << 16) \ + | (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\ + | (MUX_APLL_SEL_MOUTMPLLFOUT << 0)) + +/* CLK_DIV_CPU0 */ +#define APLL_RATIO 0x0 +#define PCLK_DBG_RATIO 0x1 +#define ATB_RATIO 0x3 +#define PERIPH_RATIO 0x3 +#define COREM1_RATIO 0x7 +#define COREM0_RATIO 0x3 +#define CORE_RATIO 0x0 +#define CLK_DIV_CPU0_VAL ((APLL_RATIO << 24) \ + | (PCLK_DBG_RATIO << 20) \ + | (ATB_RATIO << 16) \ + | (PERIPH_RATIO << 12) \ + | (COREM1_RATIO << 8) \ + | (COREM0_RATIO << 4) \ + | (CORE_RATIO << 0)) + +/* CLK_DIV_CPU1 */ +#define HPM_RATIO 0x0 +#define COPY_RATIO 0x3 +#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) | (COPY_RATIO)) + +/* CLK_SRC_DMC */ +#define MUX_PWI_SEL_XXTI 0x0 +#define MUX_PWI_SEL_XUSBXTI 0x1 +#define MUX_PWI_SEL_SCLK_HDMI24M 0x2 +#define MUX_PWI_SEL_SCLK_USBPHY0 0x3 +#define MUX_PWI_SEL_SCLK_USBPHY1 0x4 +#define MUX_PWI_SEL_SCLK_HDMIPHY 0x5 +#define MUX_PWI_SEL_SCLKMPLL 0x6 +#define MUX_PWI_SEL_SCLKEPLL 0x7 +#define MUX_PWI_SEL_SCLKVPLL 0x8 +#define MUX_DPHY_SEL_SCLKMPLL 0x0 +#define MUX_DPHY_SEL_SCLKAPLL 0x1 +#define MUX_DMC_BUS_SEL_SCLKMPLL 0x0 +#define MUX_DMC_BUS_SEL_SCLKAPLL 0x1 +#define CLK_SRC_DMC_VAL ((MUX_PWI_SEL_XUSBXTI << 16) \ + | (MUX_DPHY_SEL_SCLKMPLL << 8) \ + | (MUX_DMC_BUS_SEL_SCLKMPLL << 4)) + +/* CLK_DIV_DMC0 */ +#define CORE_TIMERS_RATIO 0x1 +#define COPY2_RATIO 0x3 +#define DMCP_RATIO 0x1 +#define DMCD_RATIO 0x1 +#define DMC_RATIO 0x1 +#define DPHY_RATIO 0x1 +#define ACP_PCLK_RATIO 0x1 +#define ACP_RATIO 0x3 +#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \ + | (COPY2_RATIO << 24) \ + | (DMCP_RATIO << 20) \ + | (DMCD_RATIO << 16) \ + | (DMC_RATIO << 12) \ + | (DPHY_RATIO << 8) \ + | (ACP_PCLK_RATIO << 4) \ + | (ACP_RATIO << 0)) + +/* CLK_DIV_DMC1 */ +#define DPM_RATIO 0x1 +#define DVSEM_RATIO 0x1 +#define PWI_RATIO 0x1 +#define CLK_DIV_DMC1_VAL ((DPM_RATIO << 24) \ + | (DVSEM_RATIO << 16) \ + | (PWI_RATIO << 8)) + +/* CLK_SRC_TOP0 */ +#define MUX_ONENAND_SEL_ACLK_133 0x0 +#define MUX_ONENAND_SEL_ACLK_160 0x1 +#define MUX_ACLK_133_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_133_SEL_SCLKAPLL 0x1 +#define MUX_ACLK_160_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_160_SEL_SCLKAPLL 0x1 +#define MUX_ACLK_100_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_100_SEL_SCLKAPLL 0x1 +#define MUX_ACLK_200_SEL_SCLKMPLL 0x0 +#define MUX_ACLK_200_SEL_SCLKAPLL 0x1 +#define MUX_VPLL_SEL_FINPLL 0x0 +#define MUX_VPLL_SEL_FOUTVPLL 0x1 +#define MUX_EPLL_SEL_FINPLL 0x0 +#define MUX_EPLL_SEL_FOUTEPLL 0x1 +#define MUX_ONENAND_1_SEL_MOUTONENAND 0x0 +#define MUX_ONENAND_1_SEL_SCLKVPLL 0x1 +#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL_ACLK_133 << 28) \ + | (MUX_ACLK_133_SEL_SCLKMPLL << 24) \ + | (MUX_ACLK_160_SEL_SCLKMPLL << 20) \ + | (MUX_ACLK_100_SEL_SCLKMPLL << 16) \ + | (MUX_ACLK_200_SEL_SCLKMPLL << 12) \ + | (MUX_VPLL_SEL_FINPLL << 8) \ + | (MUX_EPLL_SEL_FINPLL << 4)\ + | (MUX_ONENAND_1_SEL_MOUTONENAND << 0)) + +/* CLK_SRC_TOP1 */ +#define VPLLSRC_SEL_FINPLL 0x0 +#define VPLLSRC_SEL_SCLKHDMI24M 0x1 +#define CLK_SRC_TOP1_VAL (VPLLSRC_SEL_FINPLL) + +/* CLK_DIV_TOP */ +#define ONENAND_RATIO 0x0 +#define ACLK_133_RATIO 0x5 +#define ACLK_160_RATIO 0x4 +#define ACLK_100_RATIO 0x7 +#define ACLK_200_RATIO 0x3 +#define CLK_DIV_TOP_VAL ((ONENAND_RATIO << 16) \ + | (ACLK_133_RATIO << 12)\ + | (ACLK_160_RATIO << 8) \ + | (ACLK_100_RATIO << 4) \ + | (ACLK_200_RATIO << 0)) + +/* CLK_SRC_LEFTBUS */ +#define MUX_GDL_SEL_SCLKMPLL 0x0 +#define MUX_GDL_SEL_SCLKAPLL 0x1 +#define CLK_SRC_LEFTBUS_VAL (MUX_GDL_SEL_SCLKMPLL) + +/* CLK_DIV_LEFTBUS */ +#define GPL_RATIO 0x1 +#define GDL_RATIO 0x3 +#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4) | (GDL_RATIO)) + +/* CLK_SRC_RIGHTBUS */ +#define MUX_GDR_SEL_SCLKMPLL 0x0 +#define MUX_GDR_SEL_SCLKAPLL 0x1 +#define CLK_SRC_RIGHTBUS_VAL (MUX_GDR_SEL_SCLKMPLL) + +/* CLK_DIV_RIGHTBUS */ +#define GPR_RATIO 0x1 +#define GDR_RATIO 0x3 +#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4) | (GDR_RATIO)) + +/* CLK_SRS_FSYS: 6 = SCLKMPLL */ +#define SATA_SEL_SCLKMPLL 0 +#define SATA_SEL_SCLKAPLL 1 + +#define MMC_SEL_XXTI 0 +#define MMC_SEL_XUSBXTI 1 +#define MMC_SEL_SCLK_HDMI24M 2 +#define MMC_SEL_SCLK_USBPHY0 3 +#define MMC_SEL_SCLK_USBPHY1 4 +#define MMC_SEL_SCLK_HDMIPHY 5 +#define MMC_SEL_SCLKMPLL 6 +#define MMC_SEL_SCLKEPLL 7 +#define MMC_SEL_SCLKVPLL 8 + +#define MMCC0_SEL MMC_SEL_SCLKMPLL +#define MMCC1_SEL MMC_SEL_SCLKMPLL +#define MMCC2_SEL MMC_SEL_SCLKMPLL +#define MMCC3_SEL MMC_SEL_SCLKMPLL +#define MMCC4_SEL MMC_SEL_SCLKMPLL +#define CLK_SRC_FSYS_VAL ((SATA_SEL_SCLKMPLL << 24) \ + | (MMCC4_SEL << 16) \ + | (MMCC3_SEL << 12) \ + | (MMCC2_SEL << 8) \ + | (MMCC1_SEL << 4) \ + | (MMCC0_SEL << 0)) + +/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */ +/* CLK_DIV_FSYS1 */ +#define MMC0_RATIO 0xF +#define MMC0_PRE_RATIO 0x0 +#define MMC1_RATIO 0xF +#define MMC1_PRE_RATIO 0x0 +#define CLK_DIV_FSYS1_VAL ((MMC1_PRE_RATIO << 24) \ + | (MMC1_RATIO << 16) \ + | (MMC0_PRE_RATIO << 8) \ + | (MMC0_RATIO << 0)) + +/* CLK_DIV_FSYS2 */ +#define MMC2_RATIO 0xF +#define MMC2_PRE_RATIO 0x0 +#define MMC3_RATIO 0xF +#define MMC3_PRE_RATIO 0x0 +#define CLK_DIV_FSYS2_VAL ((MMC3_PRE_RATIO << 24) \ + | (MMC3_RATIO << 16) \ + | (MMC2_PRE_RATIO << 8) \ + | (MMC2_RATIO << 0)) + +/* CLK_DIV_FSYS3 */ +#define MMC4_RATIO 0xF +#define MMC4_PRE_RATIO 0x0 +#define CLK_DIV_FSYS3_VAL ((MMC4_PRE_RATIO << 8) \ + | (MMC4_RATIO << 0)) + +/* CLK_SRC_PERIL0 */ +#define UART_SEL_XXTI 0 +#define UART_SEL_XUSBXTI 1 +#define UART_SEL_SCLK_HDMI24M 2 +#define UART_SEL_SCLK_USBPHY0 3 +#define UART_SEL_SCLK_USBPHY1 4 +#define UART_SEL_SCLK_HDMIPHY 5 +#define UART_SEL_SCLKMPLL 6 +#define UART_SEL_SCLKEPLL 7 +#define UART_SEL_SCLKVPLL 8 + +#define UART0_SEL UART_SEL_SCLKMPLL +#define UART1_SEL UART_SEL_SCLKMPLL +#define UART2_SEL UART_SEL_SCLKMPLL +#define UART3_SEL UART_SEL_SCLKMPLL +#define UART4_SEL UART_SEL_SCLKMPLL +#define CLK_SRC_PERIL0_VAL ((UART4_SEL << 16) \ + | (UART3_SEL << 12) \ + | (UART2_SEL << 8) \ + | (UART1_SEL << 4) \ + | (UART0_SEL << 0)) + +/* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */ +/* CLK_DIV_PERIL0 */ +#define UART0_RATIO 7 +#define UART1_RATIO 7 +#define UART2_RATIO 7 +#define UART3_RATIO 7 +#define UART4_RATIO 7 +#define CLK_DIV_PERIL0_VAL ((UART4_RATIO << 16) \ + | (UART3_RATIO << 12) \ + | (UART2_RATIO << 8) \ + | (UART1_RATIO << 4) \ + | (UART0_RATIO << 0)) + +/* Required period to generate a stable clock output */ +/* PLL_LOCK_TIME */ +#define PLL_LOCKTIME 0x1C20 + +/* PLL Values */ +#define DISABLE 0 +#define ENABLE 1 +#define SET_PLL(mdiv, pdiv, sdiv) ((ENABLE << 31)\ + | (mdiv << 16) \ + | (pdiv << 8) \ + | (sdiv << 0)) + +/* APLL_CON0 */ +#define APLL_MDIV 0xFA +#define APLL_PDIV 0x6 +#define APLL_SDIV 0x1 +#define APLL_CON0_VAL SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV) + +/* APLL_CON1 */ +#define APLL_AFC_ENB 0x1 +#define APLL_AFC 0xC +#define APLL_CON1_VAL ((APLL_AFC_ENB << 31) | (APLL_AFC << 0)) + +/* MPLL_CON0 */ +#define MPLL_MDIV 0xC8 +#define MPLL_PDIV 0x6 +#define MPLL_SDIV 0x1 +#define MPLL_CON0_VAL SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV) + +/* MPLL_CON1 */ +#define MPLL_AFC_ENB 0x0 +#define MPLL_AFC 0x1C +#define MPLL_CON1_VAL ((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0)) + +/* EPLL_CON0 */ +#define EPLL_MDIV 0x30 +#define EPLL_PDIV 0x3 +#define EPLL_SDIV 0x2 +#define EPLL_CON0_VAL SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV) + +/* EPLL_CON1 */ +#define EPLL_K 0x0 +#define EPLL_CON1_VAL (EPLL_K >> 0) + +/* VPLL_CON0 */ +#define VPLL_MDIV 0x35 +#define VPLL_PDIV 0x3 +#define VPLL_SDIV 0x2 +#define VPLL_CON0_VAL SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV) + +/* VPLL_CON1 */ +#define VPLL_SSCG_EN DISABLE +#define VPLL_SEL_PF_DN_SPREAD 0x0 +#define VPLL_MRR 0x11 +#define VPLL_MFR 0x0 +#define VPLL_K 0x400 +#define VPLL_CON1_VAL ((VPLL_SSCG_EN << 31)\ + | (VPLL_SEL_PF_DN_SPREAD << 29) \ + | (VPLL_MRR << 24) \ + | (VPLL_MFR << 16) \ + | (VPLL_K << 0)) +/* + * UART GPIO_A0/GPIO_A1 Control Register Value + * 0x2: UART Function + */ +#define S5PC210_GPIO_A0_CON_VAL 0x22222222 +#define S5PC210_GPIO_A1_CON_VAL 0x222222 + +/* ULCON: UART Line Control Value 8N1 */ +#define WORD_LEN_5_BIT 0x00 +#define WORD_LEN_6_BIT 0x01 +#define WORD_LEN_7_BIT 0x02 +#define WORD_LEN_8_BIT 0x03 + +#define STOP_BIT_1 0x00 +#define STOP_BIT_2 0x01 + +#define NO_PARITY 0x00 +#define ODD_PARITY 0x4 +#define EVEN_PARITY 0x5 +#define FORCED_PARITY_CHECK_AS_1 0x6 +#define FORCED_PARITY_CHECK_AS_0 0x7 + +#define INFRAMODE_NORMAL 0x00 +#define INFRAMODE_INFRARED 0x01 + +#define ULCON_VAL ((INFRAMODE_NORMAL << 6) \ + | (NO_PARITY << 3) \ + | (STOP_BIT_1 << 2) \ + | (WORD_LEN_8_BIT << 0)) + +/* + * UCON: UART Control Value + * Tx_interrupt Type: Level + * Rx_interrupt Type: Level + * Rx Timeout Enabled: Yes + * Rx-Error Atatus_Int Enable: Yes + * Loop_Back: No + * Break Signal: No + * Transmit mode : Interrupt request/polling + * Receive mode : Interrupt request/polling + */ +#define TX_PULSE_INTERRUPT 0 +#define TX_LEVEL_INTERRUPT 1 +#define RX_PULSE_INTERRUPT 0 +#define RX_LEVEL_INTERRUPT 1 + +#define RX_TIME_OUT ENABLE +#define RX_ERROR_STATE_INT_ENB ENABLE +#define LOOP_BACK DISABLE +#define BREAK_SIGNAL DISABLE + +#define TX_MODE_DISABLED 0X00 +#define TX_MODE_IRQ_OR_POLL 0X01 +#define TX_MODE_DMA 0X02 + +#define RX_MODE_DISABLED 0X00 +#define RX_MODE_IRQ_OR_POLL 0X01 +#define RX_MODE_DMA 0X02 + +#define UCON_VAL ((TX_LEVEL_INTERRUPT << 9) \ + | (RX_LEVEL_INTERRUPT << 8) \ + | (RX_TIME_OUT << 7) \ + | (RX_ERROR_STATE_INT_ENB << 6) \ + | (LOOP_BACK << 5) \ + | (BREAK_SIGNAL << 4) \ + | (TX_MODE_IRQ_OR_POLL << 2) \ + | (RX_MODE_IRQ_OR_POLL << 0)) + +/* + * UFCON: UART FIFO Control Value + * Tx FIFO Trigger LEVEL: 2 Bytes (001) + * Rx FIFO Trigger LEVEL: 2 Bytes (001) + * Tx Fifo Reset: No + * Rx Fifo Reset: No + * FIFO Enable: Yes + */ +#define TX_FIFO_TRIGGER_LEVEL_0_BYTES 0x00 +#define TX_FIFO_TRIGGER_LEVEL_2_BYTES 0x1 +#define TX_FIFO_TRIGGER_LEVEL_4_BYTES 0x2 +#define TX_FIFO_TRIGGER_LEVEL_6_BYTES 0x3 +#define TX_FIFO_TRIGGER_LEVEL_8_BYTES 0x4 +#define TX_FIFO_TRIGGER_LEVEL_10_BYTES 0x5 +#define TX_FIFO_TRIGGER_LEVEL_12_BYTES 0x6 +#define TX_FIFO_TRIGGER_LEVEL_14_BYTES 0x7 + +#define RX_FIFO_TRIGGER_LEVEL_2_BYTES 0x0 +#define RX_FIFO_TRIGGER_LEVEL_4_BYTES 0x1 +#define RX_FIFO_TRIGGER_LEVEL_6_BYTES 0x2 +#define RX_FIFO_TRIGGER_LEVEL_8_BYTES 0x3 +#define RX_FIFO_TRIGGER_LEVEL_10_BYTES 0x4 +#define RX_FIFO_TRIGGER_LEVEL_12_BYTES 0x5 +#define RX_FIFO_TRIGGER_LEVEL_14_BYTES 0x6 +#define RX_FIFO_TRIGGER_LEVEL_16_BYTES 0x7 + +#define TX_FIFO_TRIGGER_LEVEL TX_FIFO_TRIGGER_LEVEL_2_BYTES +#define RX_FIFO_TRIGGER_LEVEL RX_FIFO_TRIGGER_LEVEL_4_BYTES +#define TX_FIFO_RESET DISABLE +#define RX_FIFO_RESET DISABLE +#define FIFO_ENABLE ENABLE +#define UFCON_VAL ((TX_FIFO_TRIGGER_LEVEL << 8) \ + | (RX_FIFO_TRIGGER_LEVEL << 4) \ + | (TX_FIFO_RESET << 2) \ + | (RX_FIFO_RESET << 1) \ + | (FIFO_ENABLE << 0)) +/* + * Baud Rate Division Value + * 115200 BAUD: + * UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1) + * UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1) + */ +#define UBRDIV_VAL 0x35 + +/* + * Fractional Part of Baud Rate Divisor: + * 115200 BAUD: + * UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10) + * UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10) + */ +#define UFRACVAL_VAL 0x4 + +/* + * TZPC Register Value : + * R0SIZE: 0x0 : Size of secured ram + */ +#define R0SIZE 0x0 + +/* + * TZPC Decode Protection Register Value : + * DECPROTXSET: 0xFF : Set Decode region to non-secure + */ +#define DECPROTXSET 0xFF +#endif @@ -186,6 +186,7 @@ omap4_panda arm armv7 panda ti omap4_sdp4430 arm armv7 sdp4430 ti omap4 s5p_goni arm armv7 goni samsung s5pc1xx smdkc100 arm armv7 smdkc100 samsung s5pc1xx +origen arm armv7 origen samsung s5pc2xx s5pc210_universal arm armv7 universal_c210 samsung s5pc2xx smdkv310 arm armv7 smdkv310 samsung s5pc2xx harmony arm armv7 harmony nvidia tegra2 diff --git a/include/configs/origen.h b/include/configs/origen.h new file mode 100644 index 0000000..e8252cc --- /dev/null +++ b/include/configs/origen.h @@ -0,0 +1,160 @@ +/* + * Copyright (C) 2011 Samsung Electronics + * + * Configuration settings for the SAMSUNG ORIGEN (S5PV310) board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/* High Level Configuration Options */ +#define CONFIG_SAMSUNG 1 /* SAMSUNG core */ +#define CONFIG_S5P 1 /* S5P Family */ +#define CONFIG_S5PC210 1 /* which is in a S5PC210 SoC */ +#define CONFIG_ORIGEN 1 /* working with ORIGEN*/ + +#include <asm/arch/cpu.h> /* get chip and board defs */ + +#define CONFIG_ARCH_CPU_INIT +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +/* Keep L2 Cache Disabled */ +#define CONFIG_L2_OFF 1 +#define CONFIG_SYS_DCACHE_OFF 1 + +#define CONFIG_SYS_SDRAM_BASE 0x40000000 +#define CONFIG_SYS_TEXT_BASE 0x43E00000 + +/* input clock of PLL: ORIGEN has 24MHz input clock */ +#define CONFIG_SYS_CLK_FREQ 24000000 + +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_CMDLINE_TAG +#define CONFIG_INITRD_TAG +#define CONFIG_CMDLINE_EDITING + +/* MACH_TYPE_ORIGEN macro will be removed once added to mach-types */ +#define MACH_TYPE_ORIGEN 3455 +#define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN + +/* Power Down Modes */ +#define S5P_CHECK_SLEEP 0x00000BAD +#define S5P_CHECK_DIDLE 0xBAD00000 +#define S5P_CHECK_LPA 0xABAD0000 + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) + +/* select serial console configuration */ +#define CONFIG_SERIAL_MULTI 1 +#define CONFIG_SERIAL2 1 /* use SERIAL 2 */ +#define CONFIG_BAUDRATE 115200 +#define S5PC210_DEFAULT_UART_OFFSET 0x020000 + +/* SD/MMC configuration */ +#define CONFIG_GENERIC_MMC 1 +#define CONFIG_MMC 1 +#define CONFIG_S5P_MMC 1 + +/* PWM */ +#define CONFIG_PWM 1 + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE + +/* Command definition*/ +#include <config_cmd_default.h> + +#define CONFIG_CMD_PING +#define CONFIG_CMD_ELF +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MMC +#define CONFIG_CMD_FAT +#undef CONFIG_CMD_NET +#undef CONFIG_CMD_NFS + +#define CONFIG_BOOTDELAY 3 +#define CONFIG_ZERO_BOOTDELAY_CHECK + +#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000" + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "ORIGEN # " +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size*/ +#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */ +#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0" +/* Boot Argument Buffer Size */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE +/* memtest works on */ +#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x6000000) +#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000) + +#define CONFIG_SYS_HZ 1000 + +/* valid baudrates */ +#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } + +/* Stack sizes */ +#define CONFIG_STACKSIZE (256 << 10) /* 256KB */ + +/* ORIGEN has 4 bank of DRAM */ +#define CONFIG_NR_DRAM_BANKS 4 +#define SDRAM_BANK_SIZE (256UL << 20UL) /* 256 MB */ +#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE +#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE) +#define PHYS_SDRAM_2_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_3 (CONFIG_SYS_SDRAM_BASE + (2 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_3_SIZE SDRAM_BANK_SIZE +#define PHYS_SDRAM_4 (CONFIG_SYS_SDRAM_BASE + (3 * SDRAM_BANK_SIZE)) +#define PHYS_SDRAM_4_SIZE SDRAM_BANK_SIZE + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH 1 +#undef CONFIG_CMD_IMLS +#define CONFIG_IDENT_STRING " for ORIGEN" + +#ifdef CONFIG_USE_IRQ +#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ +#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ +#endif + +#define CONFIG_CLK_1000_400_200 + +/* MIU (Memory Interleaving Unit) */ +#define CONFIG_MIU_2BIT_21_7_INTERLEAVED + +#define CONFIG_ENV_IS_IN_MMC 1 +#define CONFIG_SYS_MMC_ENV_DEV 0 +#define CONFIG_ENV_SIZE (16 << 10) /* 16 KB */ +#define RESERVE_BLOCK_SIZE (512) +#define BL1_SIZE (16 << 10) /*16 K reserved for BL1*/ +#define CONFIG_ENV_OFFSET (RESERVE_BLOCK_SIZE + BL1_SIZE) +#define CONFIG_DOS_PARTITION 1 + +#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR - GENERATED_GBL_DATA_SIZE) +#endif /* __CONFIG_H */ |