diff options
30 files changed, 7057 insertions, 892 deletions
@@ -1,3 +1,8 @@ +<<<<<<< master +====================================================================== +Changes since U-Boot 1.1.4: +====================================================================== +======= commit 260421a21e934a68d31fb6125b0fbd2631a8ca20 Author: Stefan Roese <sr@denx.de> Date: Mon Nov 13 13:55:24 2006 +0100 @@ -88,1276 +93,5537 @@ Date: Wed Nov 1 01:34:29 2006 +0100 commit 1954be6e9c9421b45d0a9d05b10356acc7563150 Author: Wolfgang Denk <wd@pollux.denx.de> Date: Sun Oct 29 01:03:51 2006 +0200 +>>>>>>> origin - Automatically adjust ARFLAGS so "make -s" is really silent. +* CFG_NAND_QUIET_TEST added to not warn upon missing NAND device + Patch by Stefan Roese, 07 Oct 2006 -commit fae684e89844856383bdf101440889557df3e6b1 -Author: Stefan Roese <sr@denx.de> -Date: Sat Oct 28 16:45:00 2006 +0200 +* Update ALPR code (NAND support working now) + Patch by Stefan Roese, 07 Oct 2006 - [PATCH] omap925.c: Remove unused functions +* Remove compile warnings in fpga code + Patch by Stefan Roese, 07 Oct 2006 - Signed-off-by: Ladislav Michl <ladis@linux-mips.org> - Signed-off-by: Stefan Roese <sr@denx.de> +* Add CONFIG_BOARD_RESET to configure board specific reset function + Patch by Stefan Roese, 07 Oct 2006 -commit 1265581502ab8ea8c08e8edbe9bf64fbd62fd776 -Author: Stefan Roese <sr@denx.de> -Date: Sat Oct 28 17:12:58 2006 +0200 +* Remove compile warnings in fpga code + Patch by Stefan Roese, 18 Sep 2006 - [PATCH] Add some missing machtypes for netstar & voiceblue boards +* Add initial support for the ALPR board from Prodrive + NAND needs some additional testing + Patch by Heiko Schocher, 15 Aug 2006 - Use MACH_TYPE_NETSTAR and MACH_TYPE_VOICEBLUE defines instead of - numbers in code. +* Add FPGA Altera Cyclone 2 support + Patch by Heiko Schocher, 15 Aug 2006 - Signed-off-by: Ladislav Michl <ladis@linux-mips.org> - Signed-off-by: Stefan Roese <sr@denx.de> +* Disable autoboot abort for FO300 when silent mode is enabled + (according to S1 switch setting). -commit 856f054410cef52d868feb330168b2a4c4091328 -Author: Stefan Roese <sr@denx.de> -Date: Sat Oct 28 15:55:52 2006 +0200 +* Cleanup examples binaries - [PATCH] NAND: Partition name support added to NAND subsystem +* Add support for AMCC Rainier PPX440GRx eval board + Patch by Stefan Roese, 13 Sep 2006 - chpart, nboot and NAND subsystem related commands now accept also partition - name to specify offset. +* Add NAND environment support for PPC440EPx Sequoia NAND boot config + Patch by Stefan Roese, 12 Sep 2006 - Signed-off-by: Ladislav Michl <ladis@linux-mips.org> - Signed-off-by: Stefan Roese <sr@denx.de> +* Update NAND boot documentation + Patch by Stefan Roese, 12 Sep 2006 -commit 07a69a18c2ecfda904231fdf23e2523ea7792eb6 -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Sat Oct 28 02:29:44 2006 +0200 +* Fix alignment problem in "mtdparts" command - Update CHANGELOG. +* Add documentation on the latest build environment extensions to + the README file. -commit 2751a95abd1b96911081c357e96a12fa97b40dee -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Sat Oct 28 02:29:14 2006 +0200 +* Remove dead code (i2o and dma) from cpu/mpc824x/drivers/ directory. - Enable commandline editing and hush shell on all TQM boards. +* Fix LOG_DIR directory creation error. + Add support for automatic creation of BUILD_DIR directory. -commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7 -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Sat Oct 28 02:28:02 2006 +0200 +* Fix build problem cpu/ppc4xx/ndfc.c + Patch by Stefan Roese, 07 Sep 2006 - README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE +* Fix build problem with CPCI440 + Patch by Stefan Roese, 07 Sep 2006 -commit 471a7be7a042e95e440f5de969c9765214ae8d6e -Author: Wolfgang Denk <wd@denx.de> -Date: Sat Oct 28 01:14:32 2006 +0200 +* Change Yellowstone to use CFI write buffer + Patch by Stefan Roese, 07 Sep 2006 - Check for illegal character '=' in environment variable names. +* Add support for AMCC Sequoia PPC440EPx eval board + - Add support for PPC440EPx & PPC440GRx + - Add support for PPC440EP(x)/GR(x) NAND controller + in cpu/ppc4xx directory + - Add NAND boot functionality for Sequoia board, + please see doc/README.nand-boot-ppc440 for details + - This Sequoia NAND image doesn't support environment + in NAND for now. This will be added in a short while. + Patch by Stefan Roese, 07 Sep 2006 - Make sure the string passed as variable name does not contain a '=' - character. This not only prevents the common error or typing - "setenv foo=bar" instead of "setenv foo bar", but (more importantly) - also closes a backdoor which allowed to delete write-protected - environment variables, for example by using "setenv ethaddr=". +* Fix mkimage -l bug with multifile images on 64bit platforms + Patch by David Updegraff, 06 Sep 2006 -commit 19973b6ad9863a56f5c5fbcfd90e20ab2490a2c2 -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Sat Oct 28 00:38:39 2006 +0200 +* Fix build problems on sorcery board. - Minor code cleanup. +* Fix coldfire build problems. + Patch by Marian Balakowicz, 01 Sep 2006 -commit e11887a77d81077416a2d1c5e0354916fee8c034 -Author: Haavard Skinnemoen <hskinnemoen@atmel.com> -Date: Thu Oct 26 17:55:31 2006 +0200 +* Add support for a saving build objects in a separate directory. + Modifications are based on the Linux kernel approach and support + two use cases: + 1) Add O= to the make command line 'make O=/tmp/build all' + 2) Set environement variable BUILD_DIR to point to the desired location + 'export BUILD_DIR=/tmp/build' + 'make' + The second approach can also be used with a MAKEALL script + 'export BUILD_DIR=/tmp/build' + './MAKEALL' + Command line 'O=' setting overrides the BUILD_DIR environent variable. + When none of the above methods is used the local build is performed + and the object files are placed in the source directory. - Don't pass any debug options directly to the assembler +* Remove the board/netstar/crcit binary from git repository. - When passing the -g option to gcc, gcc automatically selects a - suitable --g<format> option to pass on to the assembler. - Thus, there's no point in forcing a specific debug option on the - assembler using the -Wa mechanism. +* Fix tools/updater build error. - Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> +* Fix tools/easylogo build error. -commit ea08ff6e14f9ebb8c07cfa79c51ef540eb087393 -Author: Jon Loeliger <jdl@freescale.com> -Date: Fri Oct 27 07:47:22 2006 -0500 +* Fixed problems on PRS200 board caused by adding splash screen on MCC200 - MPC86xx: Cleaned up unused and conditionally used local variables. +* Extended README entry on coding style - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Added another example showing simple interrupt interception. -commit d38936cdae46bfd2623ff83f6ce9b616d36ab0f9 -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Fri Oct 27 11:55:21 2006 +0200 +* Added simple_strtoul(), getenv() and setenv() to the exported functions. + Also bumped up ABI version to reflect this change. - Fix "ar" flags in some Makefiles to allow for silent "make -s" +* Added interrupt handling capabilities for mpc5xxx processors. + Also added Linux like BUG() macros. -commit 4653f91c13ed51c21cc4c3855745d69a3fb1817f -Author: Ben Warren <bwarren@qstreams.com> -Date: Thu Oct 26 14:38:25 2006 -0400 +* Coding Style cleanup. + Patch by Stefano Babic, 31 Aug 2006 - Fix TSEC driver (now for real): avoid crashes if PHY is not attached - to a TSEC (e.g. a switch is connected via RMII) or - if the PHY is defective/incorrectly configured. +* Add splashscreen support for MCC200 board. - Signed-off-by: Ben Warren <bwarren@qstreams.com> +* Make the serial driver framework work with CONFIG_SERIAL_MULTI + enabled -commit b985b5d6e4fb88f508f7aa0f126c2e27ada2b999 -Author: Ben Warren <bwarren@qstreams.com> -Date: Thu Oct 26 14:38:25 2006 -0400 +* PCIe endpoint support for AMCC Yucca 440SPe board + Patch by Tirumala R Marri, 26 Aug 2006 - Fix TSEC driver: avoid crashes if PHY is not attached - to a TSEC (e.g. a switch is connected via RMII) or - if the PHY is defective/incorrectly configured. +* Improve DIMM detection for AMCC Yucca 440SPe board + Improved the memory DIMM detection for the Yucca 440SPe board for + the case where a memory DIMM is falsely detected as present. + This issue is seen on some AMCC Yucca 440SPe validation boards if + only one 512MB memory DIMM is installed, i.e. DIMM slot 0 is + populated and DIMM slot 1 is empty. In this case, U-Boot does + not correctly detect that there is only one DIMM memory module + installed and will falsely detect two DIMM memory modules are + present and therefore U-Boot will not calculate the correct amount + of total memory and u-boot will not booting up. + Patch by Adam Graham, 24 Aug 2006 - Signed-off-by: Ben Warren <bwarren@qstreams.com> +* Fix typo. -commit 2b2a40bebbf1822506e80e631d7253e60f0e0fe6 -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Thu Oct 26 16:24:31 2006 +0200 +* Code cleanup - Code cleanup. +* Update for MCC200 / PRS200 boards: + - auto-adjust console device for Linux. + - fix typos. -commit 5e3b0bc19f07ed277d85324ad0427642c8981baf -Author: Haavard Skinnemoen <hskinnemoen@atmel.com> -Date: Wed Oct 25 15:48:59 2006 +0200 +* Add a fix for a buggy USB device on the FO300 board. - Finish up support for the ATSTK1000/ATSTK1002 boards +* Updates for MCC200 / PRS200 boards: + - support for configurations with SDRAM or DDR memory, + - support for highboot and lowboot + - adjusting environment definitions - Add atstk1002_config target to Makefile and move the AVR32 section - down below Blackfin so that it doesn't end up in the middle of - MIPS. +* Add support for WTK FO300 board (TQM5200 based). - Drop the autogenerated linker script thing for now. Will have to - revisit how to handle chips with different flash and RAM layout - later. +* Fix TQM834x hang. - Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> +* Update for SC520 board. + Patch by David Updegraff, 02 Dec 2005 -commit c76f951a747cfb87ba826ef45b5aea82d5b5dbb4 -Author: Kumar Gala <galak@kernel.crashing.org> -Date: Tue Oct 24 23:47:37 2006 -0500 +* Fixed common.h spelling error. + Patch by Cory Tusar, 30 Nov 2005 - Added support for Multi-Image files that contain a device tree +* Fix typo. + Patch by Andreas Engel, 28 Nov 2005 - If a Multi-Image file contains a third image we try to use it as a - device tree. The device tree image is assumed to be uncompressed in the - image file. We automatically allocate space for the device tree in memory - and provide an 8k pad to allow more than a reasonable amount of growth. +* Fix fatload command on FAT32 formatted partitions. + Patch by Joachim Jaeger, 18 Nov 2005 - Additionally, a device tree that was contained in flash will now automatically - get copied to system memory as part of boot. Previously an error was - reported if one tried to boot a device tree that was in flash. +* Fix drivers/dm9000.c when configured in 32 bit mode. + Patch by Eric Benard, 17 Nov 2005 - Signed-off-by: Kumar Gala <galak@kernel.crashing.org> +* Cleanup debug code for yucca board. -commit 7c52c4b943ff52bbe8796a7e2d3e476ceaf3f512 -Author: Wolfgang Denk <wd@denx.de> -Date: Tue Oct 24 21:35:55 2006 +0200 +* MCC200: restrict addressable flash space to 32 MB - Switch to automatically generated CHANGELOG file. - (use "make CHANGELOG" to update it from time to time) +* Add debug console on COM12 for MCC200 board -commit 7ade0c634a979c32fa91a74e8f5775f24651fbe6 -Author: Stefan Roese <sr@denx.de> -Date: Tue Oct 24 18:06:48 2006 +0200 +* Fix control-c handing in CONFIG_CMDLINE_EDITING + Properly pass break code back from readline. + Patch by Roger Blofeld, 31 Jul 2006 - Fix bug in PPC440 NAND driver cpu/ppc4xx/ndfc.c - Patch by Stefan Roese, 24 Oct 2006 +* Add commandline history support to all AMCC eval boards + Patch by Stefan Roese, 07 Aug 2006 -commit 8ae3b713b2286e0c3213b7802062e4c1599010de -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Tue Oct 24 17:24:55 2006 +0200 +* Add Macronix MXLV320T flash support for AMCC Bamboo + Patch by Stefan Roese, 07 Aug 2006 - Merge with /home/wd/git/u-boot/master +* Change "mii info" to not print an error upon missing PHY at address + Patch by Stefan Roese, 07 Aug 2006 -commit 47a6989c10685d2ab3efcf95228ce50d2a496d3e -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Tue Oct 24 15:32:57 2006 +0200 +* Fix PCI-Express on PPC440SPe rev. A. - Code cleanup +* Fix preboot message on TQM85xx after switching to hush parser. -commit 3a78e3e75b633ecb6413114ffd11e2f000c4f11e -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Tue Oct 24 14:51:36 2006 +0200 +* Adapt TQM85xx ramdisk address to Linux kernel memory map - Move atstk1000 files into vendor specific directory. - Patch by Haavard Skinnemoen, 12 Sep 2006 +* Add initial support for PCI-Express on PPC440SPe (Yucca board). -commit 6ccec4492e77428fd6eafd3dfe94fbdf08e91d37 -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Tue Oct 24 14:42:37 2006 +0200 +* Fix compiler warning for TRAB board. + Patch by Martin Krause, 07 Aug 2006 - Add ATSTK1000 and ATSTK1002 board support - Patch by Haavard Skinnemoen, 06 Sep 2006 +* Prevent USB commands from working when USB is stopped. - This patch adds support for the ATSTK1000 with the ATSTK1002 CPU - daughterboard. +* Add rudimentary handling of alternate settings of USB interfaces. + This is in order to fix issues with some USB sticks timing out + during initialization. Some code readability improvements. - ATSTK1000 is a full-featured development board for AT32AP CPUs. It - has two ethernet ports, a high quality QVGA LCD panel, a loudspeaker, - and connectors for USART, PS/2, VGA, USB, MMC/SD cards and - CompactFlash cards. For more information, please see this page: +* PPC440 DDR setup: Set SDRAM0_CFG0[PMU]=0 for best performance + AMCC suggested to set the PMU bit to 0 for best performace on + the PPC440 DDR controller. + Please see doc/README.440-DDR-performance for details. + Patch by Stefan Roese, 28 Jul 2006 - http://www.atmel.com/dyn/products/tools.asp?family_id=682 +* AMCC bamboo (440EP) U-Boot image reduced to 384kbyte + Please see doc/README.bamboo for details. + Patch by Stefan Roese, 27 Jul 2006 - The ATSTK1002 is a daughterboard for the ATSTK1000 supporting the - AT32AP7000 chip. +* Fix CONFIG_CMDLINE_EDITING implementation + Patch by Stefan Roese, 27 Jul 2006 - Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> +* Fix preboot message on TQM5200 after switching to hush parser. -commit f93ae788c3640fcde5db383471d45548ff4060d0 -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Tue Oct 24 14:31:24 2006 +0200 +* MCC200: set default configuration to low_boot DDR, + and support for configurable options high_boot and/or SDRAM. - Add common serial driver for Atmel AT32 and AT91 chips - Patch by Haavard Skinnemoen, 06 Sep 2006 +* Add support for 256 MB SDRAM on CPU87 + Patch by Josef Wagner, 25 Nov 2005 - This is a first attempt at creating a common serial driver for Atmel - chips. For now, it supports the AT32AP7000 AVR32 chip, but it should - be possible to support AT91RM9200 and other ARM-based chips with some - minor modifications. +* Add configuration for cam5200 board (based on TQM5200S). - There's nothing fundamentally AVR32-specific in this driver, but it - does use some features which are currently only defined for the - AT32AP CPU port: - * pm_get_clock_freq: Obtain the clock frequency of a given domain - * gd->console_uart: A "struct device" containing information about - register mappings, gpio resources and clocks associated with the - UART device. +* More code cleanup - For more information about these features, please see the "AT32AP - CPU" patch. +* Disabled kvme080 board in MAKEALL because of build problems. -commit 72a087e04705c26cad982879ebd06b5281bf825a -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Tue Oct 24 14:27:35 2006 +0200 +* Code cleanup - Add AT32AP CPU and AT32AP7000 SoC support - Patch by Haavard Skinnemoen, 06 Sep 2006 +* Update NetStar board + Patch by Ladislav Michl, 03 Nov 2005 - This patch adds support for the AT32AP CPU family and the AT32AP7000 - chip, which is the first chip implementing the AVR32 architecture. +* Make code better readable. + Patch by Ladislav Michl, 14 Sep 2005 - The AT32AP CPU core is a high-performance implementation featuring a - 7-stage pipeline, separate instruction- and data caches, and a MMU. - For more information, please see the "AVR32 AP Technical Reference": +* Enable initrd ATAG for xm250 board. + Patch by Josef Wagner, 05 Sep 2005 - http://www.atmel.com/dyn/resources/prod_documents/doc32001.pdf +* Add readline cmdline-editing extension + Patch by JinHua Luo, 01 Sep 2005 - In addition to this, the AT32AP7000 chip comes with a large set of - integrated peripherals, many of which are shared with the AT91 series - of ARM-based microcontrollers from Atmel. Full data sheet is - available here: +* Add support for friendly-arm SBC-2410X board + Patch by JinHua Luo, 01 Sep 2005 - http://www.atmel.com/dyn/resources/prod_documents/doc32003.pdf +* Fix multi-part image support on i386 platform. + Patch by David Updegraff, 19 Aug 2005 - Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> +* Add support for KVME080 board + Patch by Sangmoon Kim, 18 Aug 2005 -commit 7b64fef33c66be648826c0ff9758298ef13d0604 -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Tue Oct 24 14:21:16 2006 +0200 +* Fix MIPS LE build problem + Patch by Matej Kupljen, 10 Aug 2005 - Add AVR32 architecture support - Patch by Haavard Skinnemoen, 6 Sep 2006 16:23:02 +0200 +* Check argument count in "mii" command. + Problem pointed out by Andrew Dyer, 13 Jun 2005 - This patch adds common infrastructure code for the Atmel AVR32 - architecture. See doc/README.AVR32 for details. +* Cleanup TQM5200 board configurations: + - make highboot configurations use environment at high end, too, + to avoid flash fragmentation + - always use redundand environment + - don't enable video code for modules without graphics controller + - provide useful (though different) mtdparts settings + - get rid of CONFIG_CS_AUTOCONF which was always set anyway - Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> +* Extend mkconfig tool to print more useful target name -commit 2da2d9a4766063b9848f3a35ad6025499cf87265 -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Tue Oct 24 13:57:33 2006 +0200 +* Add support for high-boot on TQM5200 and TQM5200S boards. + Hint: the CPLD on the TQM5200 must be programmed with a software + version supporting the high boot option! The new TQM5200S is + already supporting this option. On the TQM5200 this option will be + supported in configurations with MPC5200 rev B processors. + To actually "high boot", set jumper X30 on the STK52xx. + Patch by Martin Krause, 12 Jul 2006 - Use -g instead of -gstabs in AFLAGS_DEBUG - Patch by Haavard Skinnemoen, 30 Aug 2006 +* Add support for new TQM5200 revisions + - Support for TQM5200S (short version without graphic controller) + - Support for modules with 'N' type S29GL128N Spansion flashes + (requires changes to flash layout) + - Support for MPC5200B cpu (mostly support for second SDRAM bank) + Patch by Martin Krause, 07 Jul 2006 - In config.mk, -Wa,-gstabs is unconditionally appended to AFLAGS no - matter what the target's preferred debugging format is. This patch - simply replaces -gstabs with -g, so that the default debugging format - for the architecture is used. +* Fix support for PS/2 keyboard on TQM85xx boards + The PS/2 keyobard driver for the TQM85xx modules only supports the + internal DUART of the MPC85xx CPU. Since the MPC8560 doesn't + include a DUART, the TQM8560 modules can't be used with the PS/2 + keyboard controller on the STK85xx board. + The PS/2 keyboard driver should work with the modules TQM8540, + TQM8541 and TQM8555, but it only has been tested on a TQM8540, yet. + Make sure the PS/2 controller on the STK85xx is programmed. Jumper + settings: X66 1-2, 9-10; X61 2-3 + Patch by Martin Krause, 21 Jun 2006 -commit 965829872169c2996023840d98e1d85ad148d629 -Author: Wolfgang Denk <wd@pollux.denx.de> -Date: Tue Oct 24 13:55:18 2006 +0200 +* Adjust RTC century handling on STK52xx board to match Linux driver. + Patch by Martin Krause, 12 Jun 2006 - Fix/workaround broken dependency handling with make 3.81 - Based on patch by Haavard Skinnemoen, 29 Aug 2006 11:20:39 +0200 +* Adjust filenames for USB update images on TRAB board. + During an automatic update via USB stick, U-Boot searches for + images with the name "firmware.img" and "kernel.img". This names + are now changed to "firmw_01.img" and "kernl_01.img". This is done, + to prevent updates of new boards (with the new macronics "c" step + flashes) with old, incompatible firmware or kernel versions. + Patch by Martin Krause, 21 Jun 2006 -commit 8318fbf8cc30418b621ea9f39b84b4c1a08f003a -Author: Marian Balakowicz <m8@semihalf.com> -Date: Mon Oct 23 22:17:05 2006 +0200 +* Bugfix in VFD routine on TRAB board. + Make sure upper lext pixel can be set to blue, too + (so far only red was possible). + Patch by Martin Krause, 15 Feb 2006 - Fix sequoia separate object direcory building problems. +* Enable buffered flash writes for TB5200 board. -commit 3dfa9cfdcee78b30da3432318b32821ffabe974b -Author: Jon Loeliger <jdl@freescale.com> -Date: Fri Oct 20 17:16:35 2006 -0500 +* Fix some bugs in TRAB board flash driver. + - increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds + - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT + - remove "Unlock Bypass" mode, because macronix flashes do not support + this mode officially + - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified + for Intel compatible flashes, not for AMD compatible. + Patch by Martin Krause, 15 Feb 2006 - Use generic I2C register block on 85xx and 86xx. +* Add additional error messages to flash driver on TRAB board + (for erase errors and timeout errors) + Patch by Martin Krause, 14 Feb 2006 - Replace private IMMAP I2C structures with generic reg block - and allow 86xx to have multiple I2C device busses. +* Add support for TB5200 board + The TB5200 ("Tinybox") is a small baseboard for the TQM5200 module + integrated in a little aluminium case. + Patch by Martin Krause, 8 Jun 2006 - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Enable buffered flash writes for TQM5200 board. -commit f5012827df11ca0c9be1df5f8b153e188dc2fa7c -Author: Jon Loeliger <jdl@freescale.com> -Date: Fri Oct 20 15:54:34 2006 -0500 +* Fix problems with SanDisk Corporation Cruzer Micro USB memory stick. - Fix compilation warnings on a few 85xx boards. +* Add support for TQM885D board. + Patch by Martin Krause, 20 Mar 2006 - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Fix FEC initialisation: All MII configuration is done via FEC1 + registers, but MII_SPEED was configured according to FEC used. So + if only FEC2 was used, this caused the real MII_SPEED register in + FEC1 to stay uninitalised, leqading to "mii_send STUCK!" messages. + Fix: always configure MII_SPEED on FEC1 only. + Patch by Markus Klotzbuecher, 12 Jul 2006 + +* Add support for SPC1920 board. + Patch by Markus Klotzbuecher, 12 Jul 2006 + +* MCC200 board: support console on any one of the Quad UART ports. + +* Fix error in flash protection calculation on MCC200 board. + +* Major PCMCIA Cleanup to make code better readable and maintainable. + Notes: + - Board-dependend code for RPXLITE and RPXCLASSIC-based boards + placed to the drivers/rpx_pmcia.c file to avoid duplication. + Same for TQM8xx-based boards (drivers/tqm8xx_pmcia.c). + - drivers/i82365.c has been split into two parts located at + board/atc/ti113x.c and board/cpc45/pd67290.c (ATC and CPC45 are + the only boards using CONFIG_82365). + - Changes were tested for clean build and *very* *few* boards. + +* Fix timer problems on AMCC yucca board. + Set Timer Clock Select to use CPU clock as a timer input source. + +* Bring yucca config more in line with other AMCC boards. -commit 2047672684cf85cb6f96a1fbc993180aaaf19a99 -Author: Jon Loeliger <jdl@freescale.com> -Date: Fri Oct 20 15:50:15 2006 -0500 +* Add AMCC bamboo board to MAKEALL build script. - Converted all 85xx boards to use a common FSL I2C driver. - Introduced COFIG_FSL_I2C to select the common FSL I2C driver. - And removed hard i2c path from a few u-boot.lds scipts too. - Minor whitespace cleanups along the way. +* Fix AMCC bamboo eval board compilation errors. + +* Add system memory to the PCI region list for AMCC PPC44x CPUs. + Enabled it for Yucca board. - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Cleanup config file and bootup output for Yucca board. -commit 4d45f69e362b05892c9e92a7907e5820995612aa -Author: Jon Loeliger <jdl@freescale.com> -Date: Thu Oct 19 12:02:24 2006 -0500 +* Fix CONFIG_440_GX define usage. - Rewrite a series of goto statements as a sequences of - conditional expressions instead. +* Remove autogenerated bmp_logo.h file. - Use consistent return code 0/-1 for good/bad indicators. +* Add support for AMCC 440SPe CPU based eval board (Yucca). - Include one fewer file if the driver isn't used at all. +* Call serial_initialize() before first debug() is used. - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Cleanup trab board for GCC-4.x -commit 7237c033b02fe295880435f1eb80819a0c987532 -Author: Jon Loeliger <jdl@freescale.com> -Date: Thu Oct 19 11:02:16 2006 -0500 +* VoiceBlue update: use new MTD flash partitioning methods, use more + reasonable TEXT_BASE, update default environment and enable keyed + autoboot. + Patch by Ladislav Michl, 16. Aug 2005 - Moved i2c driver out of cpu/mpc86xx/i2c.c into drivers/fsl_i2c.c +* Add forgotten changes for the PLEB 2 Board. + Patch by David Snowdon, 13. Aug 2005 - in an effort to begin to unify the umpteen FSL I2C drivers that - are all otherwise very similar. +* Add support for wrPPMC7xx/74xx boards + Patch by Richard Danter, 12 Aug 2005 - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Add support for gth2 board + Patch by Thomas Lange, Aug 11 2005 -commit 13a7fcdf37f6ea9429ae04c9df67f893364cfe4b -Author: Jon Loeliger <jdl@freescale.com> -Date: Thu Oct 19 11:33:52 2006 -0500 +* Add support for CONFIG_SERIAL_MULTI on MPC5xxx + Patch by Martin Krause, 8 Jun 2006 - * Fix a bunch of compiler warnings for gcc 4.0 + This patch supports two serial consoles on boards with + a MPC5xxx CPU. The console can be switched at runtime + by setting stdin, stdout and stderr to the desired serial + interface (serial0 or serial1). The PSCs to be used as + console port are definded by CONFIG_PSC_CONSOLE + and CONFIG_PSC_CONSOLE2. + See README.serial_multi for details. - Signed-off-by: Matthew McClintock <msm@freescale.com> +* Bugfix in I2C initialisation on S3C2400. + If the bus is blocked because of a previously interrupted + transfer, up to eleven clocks are generated on the I2CSCL + line to complete the transfer and to free the bus. + With this fix pin I2CSCL (PG6) is really configured as GPIO + so the clock pulses are really generated. + Patch by Martin Krause, 04 Apr 2006 -commit af9e1f5b9e6f9ce810f5e8bf2961c9542a5865c2 -Author: Stefan Roese <sr@denx.de> -Date: Tue Oct 17 06:14:31 2006 +0200 +* Fix DDR6 errata on TQM834x boards + Patch by Thomas Waehner, 07 Mar 2006 + +* Remove obsolete flash driver board/tqm5200/flash.c + Patch by Martin Krause, 11 Jan 2006 + +* Update configuration for CMC-PU2 board + Patch by Martin Krause, 17 Nov 2005 + +* Add support for PS/2 keyboard on TQM85xx board + Patch by Martin Krause, 07 Nov 2005 + + Tested on a STK85XX baseboard. Make sure the PS/2 controller + has been programmed. Jumper Settings: X66 1-2, 9-10; X61 2-3 + +* Fix TRAB channel switching delay for trab_fkt.bin standalone applikation + In tsc2000_read_channel() the delay after setting the multiplexer + to a temperature channel is increased from 1,5 ms to 10 ms. This + is to allow the multiplexer inputs to stabilize after huge steps + of the input signal level. + Patch by Martin Krause, 08 Nov 2005 + +* Adjust TQM5200 make targets + Make the automatic CS configuration the default. + The dedicated configurations CONFIG_TQM5200_AA, CONFIG_TQM5200_AB + and CONFIG_TQM5200_AC are removed. + "TQM5200_config" is now the default for STK52XX.200 base boards. + On a STK52XX.100 base board "TQM5200_STK100_config" must be used. + Patch by Martin Krause, 07 Nov 2005 + +* Fix setting of environment variable "ver" on trab board + The environment variable "ver" is now set before + do_auto_update() is called, so that "ver" can be used + in USB update scripts. + Patch by Martin Krause, 27 Oct 2005 + +* Fix wrong usage of udelay() in led_blink() on trab board + Patch by Martin Krause, 27 Oct 2005 + +* Fix udelay bug in vfd.c for trab board + Patch by Martin Krause, 27 Oct 2005 + +* Disable JFFS2 support for trab board + Patch by Martin Krause, 27 Oct 2005 + +* Change mtdparts definition on trab board to match current flash map + Patch by Martin Krause, 27 Oct 2005 + +* Fix memory init problems on MCC200 board + +* Fix IxEthDB.h to compile again + Patch by Stefan Roese, 14 Jun 2006 + +* Minor cleanup for PCS440EP board + Patch by Stefan Roese, 13 Jun 2006 + +* Add MCF5282 support (without preloader) + relocate ichache_State to ram + u-boot can run from internal flash + Add EB+MCF-EV123 board support. + Add m68k Boards to MAKEALL + Patch from Jens Scharsig, 08 Aug 2005 + +* Nios II - Add Altera EP1C20, EP1S10 and EP1S40 boards + Patch by Scott McNutt, 08 Jun 2006 + +* Nios II - Add EPCS Controller bootrom work-around + -When booting from an epcs controller, the epcs bootrom may leave the + slave select in an asserted state causing soft reset hang. This + patch ensures slave select is negated at reset. + Patch by Scott McNutt, 08 Jun 2006 + +* Update PK1C20 board + -Update base addresses for standard configuration + -Eliminate use of CACHE_BYPASS in board code + Patch by Scott McNutt, 08 Jun 2006 + +* Nios II - Fix I/O Macros and mini-app stubs + -Fix asm/io.h macros + -Eliminate use of CACHE_BYPASS in cpu code + -Eliminate assembler warnings + -Fix mini-app stubs and force no small data + Patch by Scott McNutt, 08 Jun 2006 + +* Fix U-Boot environment sector protection on MCC200 board + +* Minor cleanup for PCS440EP board + +* Update PCS440EP port to fit into one flash device (incl. environment) + Patch by Stefan Roese, 06 Jun 2006 + +* Add support for PCS440EP board + Patch by Stefan Roese, 02 Jun 2006 + +* Fix examples/Makefile; some build targets were lost + +* Fix watchdog handling in CFI flash driver + Just use udelay() when waiting for status changes which will + implicitely trigger the watchdog. + +* Fix PCI to memory window size problems on PM82x boards + We use the "automatic" mode that was used for the MPC8266ADS and + MPC8272 boards. Eventually this should be used on all boards?] + Patch by Wolfgang Grandegger, 17 Jan 2006 + +* Correct GPIO setup (UART1/IRQ's) on yosemite & yellowstone + Patch by Stefan Roese, 29 May 2006 + +* Update Intel IXP4xx support + - Add IXP4xx NPE ethernet MAC support + - Add support for Intel IXDPG425 board + - Add support for Prodrive PDNB3 board + - Add IRQ support + Patch by Stefan Roese, 23 May 2006 + +* Fix problem in PVR detection for 440GR + Patch by Stefan Roese, 18 May 2006 + +* Fix gcc 3.4.x AFLAGS setting for m68k platform. + +* Enable autoboot for M5271EVB board. + +* Changed default ramdisk addr in yosemite/yellowstone ports + Patch by Stefan Roese, 15 May 2006 + +* Fix PCMCIA support on virtlab2 + +* Add support for VirtLab2 board + (needed because of differences in the PCMCIA hardware). + +* Minor cleanup. + +* Update yosemite configuration to enable flash write buffer support + Patch by Stefan Roese, 10 May 2006 + +* Fix compile warnings in common/xyzModem.c + Patch by Stefan Roese, 10 May 2006 + +* Add support for AMCC 440EP Rev C and 440GR Rev B + Patch by John Otken, 08 May 2006 + +* OMAP 5912/OSK: update EMIFS CS1 timings: + Problems have been seen in the linux kernel's smc91x network driver + due to improper bus timings. The latest 2.6 OMAP kernels currently + have a workaround, but this fix belongs in u-boot. + Patch by Kevin Hilman, 13 Oct 2005 + +* Fix REG_MPU_LOAD_TIMER definition in multiple OMAP ports + Patch by Hiroki Kaminaga, 11 Mar 2006 + +* Update omap5912osk board support + - Fix OMAP support that omap5912osk compiles in current source tree + - Update with code from "http://omap.spectrumdigital.com/osk5912" + to fix problems with DDR initialization + - Fix timer setup + - Use CFI flash driver and support complete 32MB of onboard flash + - Add "print_cpuinfo()" and "checkboard()" functions to display + CPU (with frequency) and Board infos + Patch by Stefan Roese, 10 May 2006 + +* Fix watchdog issues for ColdFire boards. + +* Add M5271EVB board support. + +* Make R5200 specific low level initialization board conditional. + +* Update CPU target identification strings for ColdFire family. + +* Update register definitions for MCF5271. + +* Fix serial console support for MCF5271. + +* Fixes for gcc 3.4 based m68k toolchain, + based on patch by Jate Sujjavanich. + +* Fix lowboot support on MCC200 board + +* Merged MPC8349ADS and MPC8349EMDS ports into MPC8349EMDS port: + - Removed MPC8349ADS port + - Added PCI support to MPC8349ADS + - reworked memory map to allow mapping of all regions with BATs + Patch by Kumar Gala, 20 Apr 2006 + +* Coding Style cleanup + +* Write RTC seconds first to maintain settings integrity per + Maxim/Dallas DS1306 data sheet. + Patch by Alan J. Luse, 02 May 2006 + +* Scheduled for removal: strnicmp() which is unused + +* Update for Intel Monahans boards: + - support for magic key detection and handling on delta board + - NAND support for zylonite board + some minor cleanup + +* Declare load_serial_ymodem() when using CFG_CMD_LOADB. + Patch by Jon Loeliger, 01 May 2006 + +* Fixed handling of bad checksums with "mkimage -l" + +* Added support for BC3450 board + Patch by Stefan Strobl, 21 Oct 2005 + +* Update for NC650 board: + - Support rev1 and rev2 hardware + - adapt to new NAND layer + - add CP850 configuration based on NC650 + +* MPC5200: enable snooping of DMA transactions on XLB even if no PCI + is configured; othrwise DMA accesses aren't cache coherent which + causes for example USB to fail. + +* Some code cleanup + +* Fix dbau1x00 boards broken by dbau1550 patch + PLL:s were not set for boards other than 1550. + Flash CFI caused card to hang due to undefined CFG_FLASH_BANKS_LIST. + Default boot is now bootp for cards other than 1550. + Patch by Thomas Lange, 10 Aug 2005 + +* Fixes common/cmd_flash.c: + - fix some compiler/parser error, if using m68k tool chain + - optical fix for protect on/off all messages, if using more + then one bank + Patch by Jens Scharsig, 28 Jul 2005 + +* Fix Quad UART mapping on MCC200 board due to new HW revision + +* Fix JFFS2 support for legacy NAND driver. + +* Remove dependencies between DoC code and old legacy NAND driver. + +* Fix PM828_PCI target, for which PCI was *not* configured in. + +* Fix Lite5200B support: initialize SDelay register + See Freescale's AN3221 "MPC5200B SDRAM Initialization and + Configuration", 3.3.1 SDelay--MBAR + 0x0190 + +* Changes/fixes for drivers/cfi_flash.c: + + - Add Intel legacy lock/unlock support to common CFI driver + + On some Intel flash's (e.g. Intel J3) legacy unlocking is + supported, meaning that unlocking of one sector will unlock + all sectors of this bank. Using this feature, unlocking + of all sectors upon startup (via env var "unlock=yes") will + get much faster. + + - Fixed problem with multiple reads of envronment variable + "unlock" as pointed out by Reinhard Arlt & Anders Larsen. + + - Removed unwanted linefeeds from "protect" command when + CFG_FLASH_PROTECTION is enabled. + + - Changed p3p400 board to use CFG_FLASH_PROTECTION + + Patch by Stefan Roese, 01 Apr 2006 + +* Changes/fixes for drivers/cfi_flash.c: + - Correctly handle the cases where CFG_HZ != 1000 (several + XScale-based boards) + - Fix the timeout calculation of buffered writes (off by a + factor of 1000) + Patch by Anders Larsen, 31 Mar 2006 + +* Updates to common PPC4xx onboard (DDR)SDRAM init code (405 and 440) + + 405 SDRAM: - The SDRAM parameters can now be defined in the board + config file and the 405 SDRAM controller values will + be calculated upon bootup (see PPChameleonEVB). + When those settings are not defined in the board + config file, the register setup will be as it is now, + so this implementation should not break any current + design using this code. + + Thanks to Andrea Marson from DAVE for this patch. + + 440 DDR: - Added function sdram_tr1_set to auto calculate the + TR1 value for the DDR. + - Added ECC support (see p3p440). + + Patch by Stefan Roese, 17 Mar 2006 + +* Fix CONFIG_SKIP_LOWLEVEL_INIT dependency in cpu/arm920t/start.S + Patch by Peter Menzebach, 13 Oct 2005 [DNX#2006040142000473] + +* Add support for ymodem protocol download + Patch by Stefano Babic, 29 Mar 2006 + +* Memory Map Update for Delta board: U-Boot is at 0x80000000-0x84000000 + Merge from Markus Klotzbücher's repo, 01 Apr 2006 + +* GCC-4.x fixes: clean up global data pointer initialization for all + boards + +* Update for Delta board: + - redundant NAND environment + - misc Monahans cleanups (remove dead code etc.) + - DA9030 Initialization; some minimal changes to PXA I2C driver to + make it work with the Monahans. + - Make Monahans clock frequency configurable using + CFG_MONAHANS_RUN_MODE_OSC_RATIO and + CFG_MONAHANS_TURBO_RUN_MODE_RATIO. + Merge from Markus Klotzbücher's repo, 25 Mar 2006 + +* Enable Quad UART om MCC200 board. + +* Cleanup MCC200 board configuration; omit non-existent stuff. + +* Add support for MPC859/866 Rev. A.0 + +* Add command for handling DDR ECC registers on MPC8349EE MDS board. + +* Fix DDR ECC bit definitions for MPC83xx. + +* Add initial support for MPC8349E MDS board. + +* Add support for ECC DDR initialization on MPC83xx. + +* Add DMA support for MPC83xx. + +* Add sync in do_reset() routine for MPC83xx after RPR register + was written to. It is need on some targets when BAT translation + is enabled. + +* Add bit definitions for MPC83xx DDR controller registers. + +* Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx. + +* Correct shift offsets in icache_status and dcache_status for MPC83xx. + +* Add support for DS1374 RTC chip. + +* Add support for Lite5200B board. + Patch by Patch by Jose Maria (Txema) Lopez, 16 Jan 2006 + +* Apply SoC concept to arm926ejs CPUs, i.e. move the SoC specific + timer and cpu_reset code from cpu/$(CPU) into the new + cpu/$(CPU)/$(SOC) directories + Patch by Andreas Engel, 13 Mar 2006 + +* Change max size of uncompressed uImage's to 8MByte and add + CFG_BOOTM_LEN to adjust this setting. + + As mentioned by Robin Getz on 2005-05-24 the size of uncompressed + uImages was restricted to 4MBytes. This default size is now + increased to 8Mbytes and can be overrided by setting CFG_BOOTM_LEN + in the board config file. + + Patch by Stefan Roese, 13 Mar 2006 + +* Fix problem with updated PCI code in cpu/ppc4xx/405gp_pci.c + Patch by Stefan Roese, 13 Mar 2006 + +* cpu/ppc4xx/start.S : exceptions are enabled after relocation + Patch by Cedric Vincent, 06 Jul 2005 + +* au1x00_eth.c: check malloc return value and abort if it failed + Patch by Andrew Dyer, 26 Jul 2005 + +* Change the sequence of events in soft_i2c.c:send_ack() to keep from + incorrectly generating start/stop conditions on the bus. + Patch by Andrew Dyer, 26 Jul 2005 + +* Fix bug in [id]cache_status commands for MPC85xx processors; + should look at LSB of L1CSRn registers to determine if L1 cache is + enabled, not the MSB. + Patch by Murray Jensen, 19 Jul 2005 + +* Fix array overflow with fw_setenv on uninitialised environment + Patch by Murray Jensen, 15 Jul 2005 + +* Add support for EmbeddedPlanet EP88x boards + Patch by Yuli Barcohen, 13 Jul 2005 + +* Remove board specific configuration includes from the common xilinx + ethernet and iic adapter code. + Patch by Michael Libeskind, 12 Jul 2005 + +* Add Nat Semi DP83865 PHY support to MPC85xx TSEC driver + Patch by Murray Jensen, 08 Jul 2005 + +* Add (some) definitions for the MPC85xx local bus controller + Patch by Murray Jensen, 08 Jul 2005 + +* Add CPM2 I/O pin functions for MPC85xx processors + Patch by Murray Jensen, 08 Jul 2005 + +* Fix compile problem + +* Added PCI support for MPC8349ADS board + Patch by Kumar Gala 11 Jan 2006 + +* Enable address translation on MPC83xx + Patch by Kumar Gala, 10 Feb 2006 + +* Decopuled setting of OR/BR and LBLAWBAR/LBLAWAR on MPC83xx + Patch by Kumar Gala, 25 Jan 2006 + +* Fixed defines for MPC83xx SICRL register to match current specs + Patch by Kumar Gala, 23 Jan 2006 + +* Only disable the MPC83xx watchdog if its enabled out of reset. + If its disabled out of reset SW can later enable it if so desired + Patch by Kumar Gala, 11 Jan 2006 + +* Allow config of GPIO direction & data registers at boot on 83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Enable time handling on 83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Make System IO Config Registers board configurable on MPC83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Fixed PCI indirect config ops to handle multiple PCI controllers + We need to adjust the bus number we are trying to access based + on which PCI controller its on + Patch by Kumar Gala, 12 Jan 2006 + +* Report back PCI bus when doing table based device config + Patch by Kumar Gala, 11 Jan 2006 + +* Added support for PCI prefetchable region and BARs + If a host controller sets up a region as prefetchable and + a device's BAR denotes it as prefetchable, allocate the + BAR into the prefetch region. + + If a BAR is prefetchable and no prefetchable region has + been setup by the controller we fall back to allocating + the BAR into the normally memory region. + Patch by Kumar Gala, 11 Jan 2006 + +* Add helper function for generic flat device tree fixups for mpc83xx + Patch by Kumar Gala, 11 Jan 2006 + +* Add support for passing initrd information via flat device tree + Patch by Kumar Gala, 11 Jan 2006 + +* Added OF_STDOUT_PATH and OF_SOC + + OF_STDOUT_PATH specifies the path to the device the kernel can use + for console output + + OF_SOC specifies the proper name of the SOC node if one exists. + Patch by Kumar Gala, 11 Jan 2006 + +* Allow board code to fixup the flat device tree before booting a kernel + Patch by Kumar Gala, 11 Jan 2006 + +* Added CONFIG_ options for bd_t and env in flat dev tree + + CONFIG_OF_HAS_BD_T will put a copy of the bd_t + into the resulting flat device tree. + + CONFIG_OF_HAS_UBOOT_ENV will copy the environment + variables from u-boot into the flat device tree + + Patch by Kumar Gala, 11 Jan 2006 + +* Add support for the DHCP vendor optional bootfile (#67). + Ignores the vendor TFTP server name option (#66). + Patch by Murray Jensen, 30 Jun 2005 + +* Fix a HW timing issue on 8548 CDS for eTSEC 3 in RGMII mode + Patch by Andy Fleming, 14 Jun 2005 + +* Fix bad register definitions for LTX971 PHY on MPC85xx boards. + Patch by Gerhard Jaeger, 21 Jun 2005 + +* Add netconsole and some more commands to RPXlite_DW board + Patch by Sam Song, 19 Jun 2005 + +* Fix bad declaration on pci_cfgfunc_nothing + Patch by Sam Song, 19 Jun 2005 + +* Adjust "echo" as a default command + Patch by Sam Song, 19 Jun 2005 + +* Fix PCIDF calculation in cpu/mpc8260/speed.c for MPC8280EC + Patch by KokHow Teh, 16 Jun 2005 + +* Add crc of data to jffs2 (in jffs2_1pass_build_lists()). + Patch by Rick Bronson, 15 Jun 2005 + +* Coding Style cleanup + +* Avoid dereferencing NULL in find_cmd() if no valid commands were found + Patch by Andrew Dyer, 13 Jun 2005 + +* Add ADI Blackfin support + - add support for Analog Devices Blackfin BF533 CPU + - add support for the ADI BF533 Stamp uClinux board + - add support for the ADI BF533 EZKit board + Patches by Richard Klingler, 11 Jun 2005 + +* Add loads of ntohl() in image header handling + Patch by Steven Scholz, 10 Jun 2005 + +* Switch MPC86xADS and MPC885ADS boards to use cpuclk environment + variable to set clock + Patch by Yuli Barcohen, 05 Jun 2005 + +* RPXlite configuration fixes + - Use correct flash sector size + - Use correct memory test end address + - Add support for bzip2 compression + - Various small fixes + Patch by Yuli Barcohen, 05 Jun 2005 + +* Memory configuration changes for ZPC.1900 board + - Fix SDRAM timing on both local bus and 60x bus + - Add support for second flash bank (SIMM) + - Change boot flash base + Patch by Yuli Barcohen, 05 Jun 2005 + +* Add support for Adder boards with 16MB SDRAM; + add support for second FEC on Adder87x board. + Patch by Yuli Barcohen, 05 Jun 2005 + +* Fix conditional for including ks8695eth driver + Patch by Greg Ungerer, 04 Jun 2005 + +* Fix Makefile: include config.mk only after CROSS_COMPILE is defined + Patch by Friedrich Lobenstock, 02 Jun 2005 + +* Fix comment in common/soft_i2c.c + Patches by Peter Korsgaard/Tolunay Orkun, 26 May 2005 + +* Cleanup compiler warnings. + Patch by Greg Ungerer, 21 May 2005 + +* Word alignment fixes for word aligned NS16550 UART + Patch by Jean-Paul Saman, 01 Mar 2005 + + Fixes bug with UART that only supports word aligned access: removed + "__attribute__ ((packed));" for "(CFG_NS16550_REG_SIZE == 4)" some + (broken!) versions of GCC generate byte accesses when encountering + the packed attribute regardless if the struct is already correctly + aligned for a platform. Peripherals that can only handle word + aligned access won't work properly when accessed with byte access. + The struct NS16550 is already word aligned for REG_SIZE = 4, so + there is no need to packed the struct in that case. + +* Fix behaviour if gatewayip is not set + Patch by Robin Gilks, 23 Dec 2004 + +* Fix cleanup for netstart board. + Remove build results from repository + +* Some code cleanup for GCC 4.x + +* Fixes to support environment in NAND flash; + enable NAND flash based environment for delta board. + +* Add support for Intel Monahans CPU on Zylonite and Delta boards + (This is Work in Progress!) + +* Add support for TQM8260-AI boards. + +* Minor code cleanup + +* Merge the new NAND code (testing-NAND brach); see doc/README.nand + Rewrite of NAND code based on what is in 2.6.12 Linux kernel + Patch by Ladislav Michl, 29 Jun 2005 + +* Add lowboot target to mcc200 board + Patch by Stefan Roese, 4 Mar 2006 + +* Fix problem with flash_get_size() from CFI driver update + Patch by Stefan Roese, 1 Mar 2006 + +* Make CFG_NO_FLASH work on ARM systems + Patch by Markus Klotzbuecher, 27 Feb 2006 + +* Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock, + use hush shell. + +* Convert mcc200 to use common CFI flash driver + Patch by Stefan Roese, 28 Feb 2006 + +* Add env-variable "unlock" to handle initial state of sectors + (locked/unlocked). + + Only the U-Boot image and it's environment is protected, + all other sectors are unprotected (unlocked) if flash + hardware protection is used (CFG_FLASH_PROTECTION) and + the environment variable "unlock" is set to "yes". + + Patch by Stefan Roese, 28 Feb 2006 + +* Update drivers/cfi_flash.c: + - find_sector() called in both versions of flash_write_cfiword() + Patch by Peter Pearse, 27th Feb 2006 + +* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode + Patch by Jose Maria Lopez, 16 Jan 2006 + +* Add support for AMD/Spansion Flashes in flash_write_cfibuffer + Patch by Alex Bastos and Thomas Schaefer, 2005-08-29 + +* Changes/fixes for drivers/cfi_flash.c: + We *should* check if there are any error bits if the previous call + returned ERR_OK (Otherwise we will have output an error message in + flash_status_check() already.) The original code would only check for + error bits if flash_status_check() returns ERR_TIMEOUT. + Patch by Marcus Hall, 23 Aug 2005 + +* Changes/fixes for drivers/cfi_flash.c: + - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c + - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c + Patch by Sangmoon Kim, 19 Aug 2005 + +* Fixes for drivers/cfi_flash.c: + - Fix wrong timeout value usage in flash_status_check() + - Round write_tout up when converting to msec in flash_get_size() + - Remove clearing flash status at the end of flash_write_cfibuffer() + which sets Intel 28F640J3 flash back to command mode on CSB472 + Patch by Tolunay Orkun, 02 July 2005 + +* Add basic support for the SMMACO4 Board from PanDaCom. + Patch by Heiko Schocher, 20 Feb 2006 + +* Add GIT version information (commid ID) to untagged U-Boot versions + + As done in the linux kernel, the U-Boot version (U_BOOT_VERSION) + of all unreleased (untagged) U-Boot images will be automatically + extended upon compiletime with a part of the GIT commit ID and + possibly with "dirty" if uncommited changes are detected. + + Here an example for the resulting version: + "U-Boot 1.1.4-g3457ac18-dirty" + + The version is now maintained in the toplevel Makefile and the + version headers are autogenerated. + + Patch by Stefan Roese, 9 Feb 2006 + +* Update default environment for INKA4x00 board. + +* Convert CPCI750 to use common CFI flash driver + Patch by Reinhard Arlt, 8 Feb 2006 + +* Various changes to esd HH405 board specific files + Patch by Matthias Fuchs, 07 Feb 2006 + +* Cleanup U-Boot boot messages on ARM. + + To match the U-Boot user interface on ARM platforms to the U-Boot + standard (as on PPC platforms), some messages with debug character + are removed from the default U-Boot build. + Enable DEBUG for lib_arm/board.c to enable debug messages. + New CONFIG_DISPLAY_CPUINFO and CONFIG_DISPLAY_BOARDINFO options. + Patch by Stefan Roese, 24 Jan 2006 + +* Fix various compiler warnings on ppc4xx builds (ELDK 4.0) + Patch by Stefan Roese, 18 Jan 2006 + +* Add VGA support (CT69000) to CPCI750 board. + Insert missing __le32_to_cpu() for filesize in ext2fs_read_file(). + Patch by Reinhard Arlt, 30 Dec 2005 + +* PMC405 and CPCI405: Moved configuration of pci resources + into config file. + PMC405 and CPCI2DP: Added firmware download and booting via pci. + Patch by Matthias Fuchs, 20 Dec 2005 + +* Add ColdFire targets to MAKEALL script + Patch by Zachary Landau, 26 Jan 2006 + +* Add support for r5200 board + Patch by Zachary Landau, 26 Jan 2006 + +* Add support for Freescale M5271 processor + Patch by Zachary Landau, 26 Jan 2006 + +* Fix 28F256J3A support on PM520 board + (without bank-switching only 32 MB can be accessed) + +* Fix mkimage bug with multifile images created on 64 bit systems. + +* Add support for 28F256J3A flash (=> 64 MB) on PM520 board + +* Fix compiler problem with at91rm9200dk board. + Patch by Eugen Bigz, 19 Dec 2005 + +====================================================================== +Changes for U-Boot 1.1.4: +====================================================================== + +* Changes to Yellowstone & Yosemite 440EP/GR eval boards: + - Changed GPIO setup to enable another address line in order to + address 64M of FLASH. + - Added function sdram_tr1_set to auto calculate the tr1 value for + the DDR. + Patch by Steven Blakeslee, 12 Dec 2005 + +* MPC5200: Set PCI retry counter to 0 = infinite retry; + The default of 255 is too short for slow devices. + Patch by Martin Nykodym, 12 Dec 2005 + +* Change port configuration for O2DNT (CODEC1 on PSC1). + +* Fix register for PCI async mode on PPC440EP + Patch by Youngchul Bang, 08 Dec 2005 + +* Fix U-Boot linking problems (add .eh_frame segment to linker script) + This segment may be required by some libgcc.a functions + (like _udivdi3). + +* Fix DPRAM offset/size for MPC8541/8555. + Simplify TQM85xx Makefile handling. + +* Fix data overflow (typo?) in rtc/ds1302.c + +* Fix U-Boot compilation for MIPS boards using ELDK 4.0 + +* Add support for TQM8541/8555 boards, TQM85xx support reworked: + - Support for TQM8541/8555 boards added. + - Complete rework of TQM8540/8560 support. + - Common TQM85xx code now supports all current TQM85xx platforms + (TQM8540/8541/8555/8560). + - DDR SDRAM size detection added. + - CAS latency default values can be overwritten by setting "serial#" + to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used. + If problems are detected with this non default CAS latency, + the default values will be used instead. + - Flash size detection added. + - Moved FCC ethernet driver initialization behind TSEC driver init + -> TSEC is first device. + Patch by Stefan Roese, 30 Nov 2005 + +* Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board. + Patch by John Otken, 23 Nov 2005 + +* Changed PPC44x startup message (cpu info, speed...) to common style: + On PPC44x platforms, the startup message generated in "cpu.c" only + comprised the ppc type and revision but not additional information + like speed etc. Those speed infos where printed in the board specific + code. This new implementation now prints all CPU infos in the common + cpu specific code. No board specific code is needed anymore and + therefore removed from all current 44x implementations. + Patch by Stefan Roese, 27 Nov 2005 + +* Adjust TQM834x PHY addresses for latest hardware revision. + +* Increase malloc arena on TQM5200 board to 256 kB. + With 64 kb uniform flash sector size the old value of 128 kB was + too small. + +* Fix miiphy global data initialization (problem on 4xx boards when + no ethaddr is assigned). Initialization moved from + miiphy_register() to eth_initialize(). + + Based on initial patch for 4xx platform by Matthias Fuchs. + +* Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h + +* Allow use of include/image.h and include/asm-*/u-boot.h in proprietary code. + The COPYING file was extended to make clear that these files can be + used in non-GPL code, too. + Also, a corresponding note was placed in the headers of the affected files. + +* Add support for Prodrive P3P440 board: + - Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c + - CFG_FLASH_QUIET_TEST added to use the common CFI driver + for bank autodetection + Patch by Stefan Roese, 22 Nov 2005 + +* Change all '$(...)' variable references into '${...}' + which makes the environment compatible with the hush shell. + WARNING: Support for the old '$(...)' syntax will be + discontinued in a later version. + +* Minor changes to init flags in TQM834x PCI. + +* Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM) + Patch by Stefan Roese, 15 Nov 2005 + +* New PPC 405EP board added: CMS700 + Added CONFIG_NET_MULTI for VOM405 board. + Added reset_phy() for VOM405 board. + Patch by Matthias Fuchs, 09 Nov 2005 + +* Updated PCI mapping for esd CPCI2DP board. + Add support for error LED. + Patch by Matthias Fuchs, 07 Nov 2005 + +* Fix MPC85xx PCI support (pci_register_hose() before pci config access) + Patch by Stefan Roese, 07 Nov 2005 + +* Correct PPC Timebase register definitions (SPRN_TBRL...) + Patch by Stefan Roese, 07 Nov 2005 + +* Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size + Patch by Stefan Roese, 05 Nov 2005 + +* Additional fix for external IRQ config on Yellowstone & Yosemite + Patch by Stefan Roese, 03 Nov 2005 + +* Add support for Ocotea pass 3 with 440GX Rev. F + Patch by Stefan Roese, 01 Nov 2005 + +* Fix external IRQ configuration on Yellowstone & Yosemite + Patch by Stefan Roese, 28 Oct 2005 + +* Add support for multiple PHYs. + Tested on the following boards: + cmcpu2 (at91rm9200/ether.c) + PPChameleon (ppc4xx/4xx_enet.c) + yukon (mpc8220/fec.c) + uc100 (mpc8xx/fec.c) + tqm834x (mpc834x/tsec.c) with EEPRO100 + lite5200 (mpc5xxx/fec.c) with EEPRO100 card (drivers/eepro100.c) + Main changes include: + common/miiphyutil.c + - miiphy_register routine was added to allow multiple PHYs to be registered + - miiphy_read and miiphy_write are now defined in this file, and + require additional argument (char *devname) + - other miiphy_* routines also require additional device name argument + ../lib_i386/board.c + ../lib_ppc/board.c + Calling reset_phy() was moved to be executed *after* eth_initialize(). + This is necessary as now some of the implementations of reset_phy() + may need to use miiphy_reset() which is not allowed before eth_initialize() + as eth_initialize registers all required miiphy_* routines. + Tested on IP860 and PHY initializes properly after this change. + +* Correct includes for flat tree builder. + +* Fix conflicting types (flash_write()) in trab auto_update.c. + +* Add PCI support for the TQM834x board. + +* Add missing 4xx board to MAKEALL + Patch by Stefan Roese, 20 Oct 2005 + +* Fix conflicting types (flash_write()) in esd auto_update.c + Patch by Stefan Roese, 20 Oct 2005 + +* Fix problem with sleep in NetConsole (use get_timer()) + Patch by Stefan Roese, 20 Oct 2005 + +* Add NetConsole Support for AMCC eval boards + Patch by Stefan Roese, 20 Oct 2005 + +* Fix NetConsole support on 4xx (only print eth link on 1st transfer) + Patch by Stefan Roese, 18 Oct 2005 + +* Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo. + Fix identation on ext2ls help entry. + Patch by Stefan Roese, 14 Oct 2005 + +* Add support for TQM834x boards. + Cleanup. + +* Cleanup for GCC-4.x + +* Add documentation for Open Firmware Flat Tree and usage. + Patch by Pantelis Antoniou, 13 Oct 2005 + +* Add missing files for Pantelis Antoniou's patch + Patch by Pantelis Antoniou, 04 Sep 2005 + +* Fix problem in ppc4xx eth-driver without ethaddr (only without + CONFIG_NET_MULTI set) + Patch by Stefan Roese, 10 Oct 2005 + +* Fix gzip bmp support (test if malloc fails, warning when truncated). + Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board. + Patch by Stefan Roese, 07 Oct 2005 + +* Add support for OF flat tree for the STXtc board. + Patch by Pantelis Antoniou, 04 Sep 2005 + +* Support passing of OF flat trees to the kernel. + Patch by Pantelis Antoniou, 04 Sep 2005 + +* Cleanup + +* Add support for NetSilicon NS7520 processor. + Patch by Art Shipkowski, 12 May 2005 + +* Add support for AP1000 board. + Patch by James MacAulay, 07 Oct 2005 + +* Eliminate hard-coded address of Ethernet transfer buffer on at91rm9200 + Patch by Anders Larsen, 07 Oct 2005 + + The Atmel errata #11 states that the transfer buffer descriptor + table must be aligned on a 16-word boundary. As it turned out, this + is insufficient - it seems the table must be aligned on a boundary + at least as large as the table itself (in Linux this is not an + issue - the table is aligned on a PAGE_SIZE (4096) boundary). + +* Fixed compilation for ARM when using a (standard) hard-FP toolchain + Patch by Anders Larsen, 07 Oct 2005 + +* Cleanup warnings for cpu/arm720t & cpu/arm1136 files. + sed the linker scripts, rather than pre-process them. + Patch by Peter Pearse, 07 Oct 2005 + +* Update make target for ARM supported boards. + Use lowlevel_init() instead of platformsetup() [rename]. + Patch by Peter Pearse, 06 Oct 2005 + +* Fix booting from serial dataflash on AT91RM9200 + Patch by Peter Menzebach, 29 Aug 2005 + +* Add JFFS2 support for TRAB board + Patch by Martin Krause, 25 Aug 2005 + +* Remove unnecessary dependency of netconsole on CONFIG_NET_MULTI + Patch by Marcus Hall, 24 Aug 2005 + +* Fix the machine-id of the Cogent csb637 board + Patch by Anders Larsen, 05 Oct 2005 + +* Complete support for the KwikByte KB920x boards + Patch by Anders Larsen, 05 Oct 2005 + +* Set the AT91RM9200 clock to asynchronous mode + Patch by Anders Larsen, 03 May 2005 + +* Set the AT91RM9200 clock to synchronous mode + Patch by Anders Larsen, 29 Apr 2005 + +* Add support for Cogent csb637 + Patch by Anders Larsen, 29 Apr 2005 + +* Fix dm9161.c initialization + Patch by Anders Larsen, 29 Apr 2005 + +* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005 + (8e2be51de8dd03c1ce4d06cbb18ad06133d47cd5) + +* Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200 + Patch by Anders Larsen, 29 Apr 2005 + +* Fix device partition intialization for SystemACE disks. + Patch by Stephen Williams, 28 Apr 2005 + +* Added support for KwikByte KB920x boards (based on AT91RM9200) + Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005 + +* Add support for S29GL064M-R3 flash chip on xsengine board + Patch by Kurt Stremerch, 18 Apr 2005 + +* E500 update: repoint IVPR to RAM when code is relocated + Patch by Kylo Ginsberg, 13 Apr 2005 + +* Fix loop end test in lib_generic/string.c:strswab() + Patch by Andrew Dyer, October 10, 2005 + Signed-off-by: Andrew Dyer <amdyer@gmail.com> + +* Cleanup + +* Update ARM Integrator boards: + Correct addessing errors in platform files. + Split off common core module data from Integrator header files to + include/armcoremodule.h. + Patch by Peter Pearse, 04 Oct 2005 + +* Make sure only supported compiler options are used + Import "cc-option" shell function from kernel and + use it to get the correct ARM GCC options for individual CPUs + Patch by Peter Pearse, 30 Jun 2005 + +* Fix 440GR to print correct cpu revision + Patch by Stefan Roese, 04 Oct 2005 + +* Change board message on AMCC Yosemite & Yellowstone to common style + Patch by Stefan Roese, 03 Oct 2005 + +* Fix compiler warning + +* Fix FEC PHY addresses for TQM85xx boards + +* Fix uninitialized variable problem in hush shell + Patch by Lars Rostock, 26 Sep 2005 + +* Undo change of f6e20fc6ca... to include/configs/trab.h + (Must have been an accident?) + +* Add support for AT91RM9200 OHCI Controller. + Patch by Eric Benard, 07 Apr 2005 + +* Update ARM mach-types.h + Patch by Eric Benard, 07 Apr 2005 + +* Add support for MP2USB board. + Patch by Eric Benard, 07 Apr 2005 + +* Add board support for armadillo HT1070 + Patch by Rowel Atienza, 06 Apr 2005 + +* Second Ethernet address enabled for MPC885ADS and MPC8272ADS. + Patch by Vitaly Bordug, 30 Mar 2005 + +* Add iopset command on mpc8xx + Patch by Daniel Eisenhut, 25 Mar 2005 + +* Add support for MII in eepro100 driver. + Patch by Gleb Natapov, 21 Mar 2005 + +* Fixes to the Lubbock (PXA 25x) support: + - Resolve the FIXME with respect to saving the u-boot environment. + - Make the default load address land in real memory. + - Fix lan91c96 SMC_{in,out}{b,w,l}() macros + Patch by David Brownell, 10 Mar 2005 + +* Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board + Patch by Marc Leeman, 04 Mar 2005 + +* OMAP242x H4 board update + - fix for ES2 differences. + - switch to using the cfi_flash driver. + - fix SRAM build address. + - fix for GP device operation. + - unlock SRAM for GP devices. + - display more device information. + - fix potential deadlock in omap24xx_i2c driver. + - fix DLL load values to match dpllout*1 operation. + - fix 2nd chip select init for combo DDR device. + - add support for CFI Intel 28F256L18 on H4 board. + Patch by Richard Woodruff, 03 Mar 2005 + +* Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h + Patch by Steven Scholz, 02 Mar 2005 + +* Fix typo in eth.c + Patch by Ara Avanesyan, 24 Feb 2005 + +* Remove unneeded #include <malloc.h> + Patch by Ladislav Michl, 22 Feb 2005 + +* Add cramfs support for m68k + Patch by Zachary Landau, 21 Feb 2005 + +* Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs + Patch by Jeff Angielski, 21 Feb 2005 + +* Fix au1x00_serial baud rate calculation: + remove hardcoded cpu clock divisor and use register instead; + round up instead of truncate + Patch by Andrew Dyer, 15 Feb 2005 + +* Add Xilinx Spartan3 family FPGA support + Patch by Kurt Stremerch, 14 Feb 2005 + +* Fix drivers/cfi_flash.c: use info->reset_cmd instead of FLASH_CMD_RESET + Patch by Zachary Landau, 11 Feb 2005 + +* Fix VOH405 Support + Patch by Matthias Fuchs, 25 Sep 2005 + +* Added support for PCI bridge on MPC8272ADS + Patch by Vitaly Bordug, Feb 09 2005 + +* Update multicore CM9XX support for Integrator AP to allow booting from flash + Patch by Jean-Paul Saman, 8 Feb 2005 + +* Fix strswab() to reliably find end of string + Patch by Andrew Dyer, 08 Feb 2005 + +* Fix typos in include/ppc440.h + Patch by Andrew E Mileski, 04 Feb 2005 + +* Add Vibren (was Accelent) PXA255 IDP Support + Patch by Cliff Brake, 04 Feb 2005 + +* Fix tools/bmp_logo.c using incorrect offset to pixel data + Patch by Andrew Dyer, 31 Jan 2005 + +* Add ARM946E cpu and core module targets; remap memory to 0x00000000 + Patch by Peter Pearse, 2 Feb 2005 + +* Fix error handling in tools/env/fw_env.c + Patch by Ara Avanesyan, 01 Feb 2005 + +* Fix MGT5100 PSC baudrate calculation + Patch by Sebastian Schau, 27 Jan 2005 + +* OMAP242x fix for GP device booting + - Add SRAM unlock for GP devices. + - Change DDR DLL unlock value to allow DPLLout*1 operation. + Patches by Richard Woodruff, 21 Jan 2005: + +* Add support for AMD's Pb1x00 eval board; + add MII routines to the au1x00 ethernet driver; + add USB ohci driver (work in progress) + Patch by Thomas Sailer, 20 Jan 2005 + +* Update omap5912osk board + Use drivers/cfi_flash.c instead of private flash driver; + Remove hardcoded personalized settings from omap5912osk.h; + Fix spacing with (RO) marks in 'flinfo' output. + Patch by Michael Bendzick, 14 Jan 2005 + +* Fix warnings for PCI code on ixp + Patch by Joe <lgxue@yahoo.com>, 13 Jan 2005 + +* virtex2 fix for bogus download error messages + The virtex2 FPGA download code watches for init going active during + a download of config data as an error condition. init also goes + active after a configuration is finished in concert with the done + signal. So far, the code does not check for done active until all + of the configuration data is sent. If configuration data has a few + extra pad bytes at the end, this would cause an error message even + though the download had suceeded. + NOTE: virtex2 slave serial and spartan2 versions may still have the + same problem. + Patch by Andrew Dyer, 12 Jan 2005 + +* Optimize flash_make_cmd in drivers/cfi_flash.c for little endian + Fix "WARNING: flash_make_cmd: unsuppported LittleEndian mode" + message when probing for nonexistent flash in little endian mode. + As a side effect more efficient and smaller code is generated, + which is always a Good Thing (TM). + Patch by Ladislav Michl, 24 Sep 2005 + +* Update for TFTP using a fixed UDP port + Use the approved environment variable names. Added "tftpdstp" to + allow ports other than 69 per Tolunay Orkun's recommendation. + Patch by Jerry Van Baren, 12 Jan 2005 + +* Allow to force TFTP to use a fixed UDP port + (Add a configuration option CONFIG_TFTP_PORT and optional env + variable tftpport) + Patch by Jerry Van Baren, 10 Jan 2005 + +* Fix ethernet timeouts on dbau1550 and other au1x00 systems + Patch by Leif Lindholm, 29 Dec 2004 + +* Cleanup: fix broken builds + +* Fix PHY address argument passing with mii info command + Patch by Andrew Dyer, 28 Dec 2004 + +* Cleanup (PPC4xx is AMCC now) + +* esd CPCI2DP board added + Patch by Matthias Fuchs, 22 Sep 2005 + +* esd PMC405 board updated + Patch by Matthias Fuchs, 22 Sep 2005 + +* Add SM501 support to HH405 board. + Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP). + Add support for eeprom write-enable (CFG_EEPROM_WREN). + Patch by Stefan Roese, 22 Sep 2005 + +* Fix autonegotiation in tsec ethernet driver + Patch by Stefan Roese, 21 Sep 2005 + +* Fix bug in auto_update (trab board) + Patch by Martin Krause, 16 Sep 2005 + +* Fix computation of framebuffer palette for 8bpp LCD bitmaps + Patch by Francesco Mandracci, 16 Sep 2005 + +* Update configuration for INKA4x0 board + +* Update configuration for PM854 board + Based on patch by R. Loeffl, 20 Jul 2005 + +* Add PCI support to TQM8540 and TQM8560 boards + Patch by Stefan Roese, 15 Sep 2005 + +* Update AMCC Yosemite to get a consistent setup for all AMCC eval + boards (baudrate, environment...). Flash driver fixed. + Patch by Stefan Roese, 15 Sep 2005 + +* Fix problem in 440GP ethernet driver (ebony). Add support for 2nd + ethernet port on ebony. + Patch by Stefan Roese, 7 Sep 2005 + +* Added support for mtddevnum and mtddevname variables (mtdparts command) + +* Change default console baud rate for stxxtc board + +* Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT). + Patch by Stefan Roese, 31 Aug 2005 + +* Fix default command set (don't include CFG_CMD_DISPLAY command) + Patch by Pantelis Antoniou, 02 Sep 2005 + +* Cleanup + +* Enable SM712 driver support for HMI1001 board. + +* Fix problems with ld version 2.16 (dot outside sections problem) + Pointed out by Gerhard Jaeger, 31 Aug 2005; + cf. http://sourceware.org/ml/binutils/2005-08/msg00412.html + +* Prepare U-Boot for gcc-4.x: fix global data pointer initialization + +* Adjust CS3 timings on HMI1001 board for dot matrix display under Linux + +* Add keyboard and dot matrix display support for HMI1001 board. + +* Prepare U-Boot for gcc-4.x + +* Fixed Bamboo port to enable running without DDR-DIMM + (Bamboo has also 64MB onboard DDR) + Patch by Stefan Roese, 24 Aug 2005 + +* Merged 405gp_enet.c and 440gx_enet.c to generic 4xx_enet.c + now handling all 4xx cpu's + Patch by Stefan Roese, 16 Aug 2005 + +* Fix make dependencies for at91rm9200 and ks8695 cpus + Patch by Steven Scholz, 23 Aug 2005 + +* Add JFFS2 support for TQM5200 board + +* Add esd cpci5200 and pf5200 boards + Patch by Reinhard Arlt, 22 Aug 2005 + +* Fix sysclock for TQM8540 and TQM8560 boards + Patch by Martin Krause, 25 Jul 2005 + +* Initialize serial# and ethaddr from manufacturer data in EEPROM on CMC-PU2 + Patch by Martin Krause, 08 Jun 2005 + +* Add new board specific commands for TQM5200/STK52XX + - Sound commands (beep, wav, sound) + - Test commands (led, can, backlight, rs232) + Patch by Martin Krause, 02 May 2005 + +* Change main clock on CMC-PU2 board from 207 MHz to 179 MHz + because of a bug in the AT91RM9200 CPU PLL + Patch by Martin Krause, 22 Apr 2005 + +* Add automatic HW detection for another CMC_PU2 variant + Patch by Martin Krause, 20 Apr 2005 + +* Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration + Patch by Martin Krause, 19 Apr 2005 + +* Fix initialization problem on TQM5200 without SM501 + Patch by Martin Krause, 08 Apr 2005 + +* Add RTC support for STK52XX.200 + Patch by Martin Krause, 07 Apr 2005 + +* Add support for IFM o2dnt board + +* Enable PCI on hmi1001 board + +* Fix return values of the jffs2 commands ls/fsload/fsinfo, + so we can use them to, e.g., check the existence of a file with + "if ls foo; then this; else that; fi" in the hush shell + Patch by Andreas Engel, 16 August 2005 + +* Coding style cleanup + +* Add support for Silicon Turnkey eXpress XTc (mpc87x/88x) board. + Patch by Dan Malek and Pantelis Antoniou, 15 Aug 2005 + +* Check return value of malloc in 440gx_enet.c + Patch by Travis B. Sawyer, 18 Jul 2005 + +* Add Sandburst Metrobox and Sandburst Karef board support packages. + Second serial port on 440GX now defined as a system device. + Add 'Short Etch' code for Cicada PHY within 440gx_enet.c + Patch by Travis B. Sawyer, 12 Jul 2005 + +====================================================================== +Changes for U-Boot 1.1.3: +====================================================================== + +* Minor code cleanup + +* Add forgotten new fils from latest VoiceBlue update + +* Make bootretry feature work with hush shell. + Caveat: this currently *requires* CONFIG_RESET_TO_RETRY to be set, too. + Patch by Andreas Engel, 19 Jul 2005 + +* Update Hymod Board Database PHP code in "tools" directory + Patch by Murray Jensen, 01 Jul 2005 + +* Make "tr" command use POSIX compliant; export HOSTOS make variable + Patch by Murray Jensen, 30 Jun 2005 + +* Fix Murray Jensen's mail address. + Patch by Murray Jensen, 30 Jun 2005 + +* Preserve PHY_BMCR during a soft reset. + Patch by Carl Riechers, 24 Jun 2005 + +* VoiceBlue update: eeprom tool can also store firmware version now. + eeprom.bin is runable by jumping at load address. + Patch by Ladislav Michl, 23 May 2005 + +* Move the AT91RM9200DK to the ARM Systems list. + Patch by Anders Larsen, 26 Apr 2005 + +* Eliminate calls of ARM libgcc.a helper functions _divsi3 and _modsi3 + Patch by Anders Larsen, 26 Apr 2005 + +* measure_gclk() is needed when DEBUG is enabled + Patch by Bryan O'Donoghue, 25 Apr 2005 + +* Add UPD-Checksum code, fix problem in net.c (return instead of break) + Patch by Reinhard Arlt, 12 Aug 2005 + +* esd PCI405 board updated + Patch by Matthias Fuchs, 28 Jul 2005 + +* esd WUH405 and DU405 board updated + Patch by Matthias Fuchs, 27 Jul 2005 + +* Fix problem in cmd_nand.c (only when defined CFG_NAND_SKIP_BAD_DOT_I) + Patch by Matthias Fuchs, 4 May 2005 + +* Update AMCC Yosemite to get a consistent setup for all AMCC eval + boards (baudrate, environment...). Flash driver fixed. + Patch by Stefan Roese, 11 Aug 2005 + +* Changed AMCC Bubinga (405EP) configuration to support 2nd eth port + Patch by Stefan Roese, 11 Aug 2005 + +* Add NAND FLASH support for AMCC Bamboo 440EP eval board + Patch by Stefan Roese, 11 Aug 2005 + +* Add configuration for IFM AEV FIFO board. + Minor coding style cleanup. + +* Add configuration for IFM SPI eval board + +* Fix CompactFlash problem on HMI1001 board + +* Make new "mtdparts" code build with older compilers + Patch by Andrea Scian, 09 Aug 2005 + +* Changed CONFIG_440_GX, CONFIG_440_EP and CONFIG_440_GR options to + CONFIG_44GX, CONFIG_440EP and CONFIG_440GR for a consistent design + with the 405 defines and the linux kernel defines. + Patch by Stefan Roese, 08 Aug 2005 + +* Fix compiler warnings with older GCC versions + +* Add common (with Linux) MTD partition scheme and "mtdparts" command + + Old, obsolete and duplicated code was cleaned up and replace by the + new partitioning method. There are two possible approaches now: + + The first one is to define a single, static partition: + + #undef CONFIG_JFFS2_CMDLINE + #define CONFIG_JFFS2_DEV "nor0" + #define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF /* use whole device */ + #define CONFIG_JFFS2_PART_SIZE 0x00100000 /* use 1MB */ + #define CONFIG_JFFS2_PART_OFFSET 0x00000000 + + The second method uses the mtdparts command line option and dynamic + partitioning: + + /* mtdparts command line support */ + #define CONFIG_JFFS2_CMDLINE + #define MTDIDS_DEFAULT "nor1=zuma-1,nor2=zuma-2" + #define MTDPARTS_DEFAULT "mtdparts=zuma-1:-(jffs2),zuma-2:-(user)" + + Command line of course produces bigger images, and may be inappropriate + for some targets, so by default it's off. + +* Fix build problems for PM856 Board + +* Fix sign extension bug in 'fpga loadb' command; + make 'fpga loadb' always print the file header info + Patch by Andrew Dyer, 11 Jan 2005 + +* Fix errors that occur when accessing SystemACE CF + Patch by Jeff Angielski, 09 Jan 2005 + +* Document switching between U-Boot and PlanetCore on RPXlite + by Sam Song, 24 Dec 2004 + +* Fix PowerQUICC II mask detection. + Patch by Eugene Surovegin, 20 Dec 2004 + +* Add support for Altera NIOS DK1C20 board + Patch by Shlomo Kut, 13 Dec 2004 + +* Add support for ep8248 board + Patch by Yuli Barcohen, 12 Dec 2004 + + Minor code cleanup. + +* Fix baudrate setting for KGDB on MPC8260 + Patch by HoJin, 11 Dec 2004 + +* Fix 'mii help' text formatting + Patch by Cory Tusar, 10 Dec 2004 + +* Fix return code of NFS command + Patch by Hiroshi Ito, 11 Dec 2004 + +* Fix typo + +* Fix compiler warnings in cpu/ppc4xx/usbdev.c + Patch by Steven Blakeslee, 04 Aug 2005 + +* Add support for AMCC Bamboo PPC440EP eval board + Patch by Stefan Roese, 04 Aug 2005 + +* Patch by Jon Loeliger + Fix style issues primarily in 85xx and 83xx boards. + - C++ comments + - Trailing white space + - Indentation not by TAB + - Excessive amount of empty lines + - Trailing empty lines + +* Patch by Ron Alder, 11 Jul 2005 + Add Xianghua Xiao and Lunsheng Wang's support for the + GDA MPC8540 EVAL board. + +* Patch by Eran Liberty + Add support for the Freescale MPC8349ADS board. + +* Patch by Jon Loeliger, 25 Jul 2005 + Move the TSEC driver out of cpu/mpc85xx as it will be shared + by the upcoming mpc83xx family as well. + +* Patch by Jon Loeliger, 05 May 2005 + Implemented support for MPC8548CDS board. + Added DDR II support based on SPD values for MPC85xx boards. + This roll-up patch also includes bugfies for the previously + published patches: + DDRII CPO, pre eTSEC, 8548 LBIU, Andy's TSEC, eTSEC 3&4 I/O + +* Patch by Jon Loeliger, 10 Feb 2005 + Add config option CONFIG_HAS_FEC calling out 8540 FEC features. + +* Patch by Jon Loeliger, Kumar Gala, 08 Feb 2005 + For MPC85xxCDS: + Adds Relaxed Timing TRLX bit to FLASH ORx regs to allow + for faster flash parts. + Add documentation for BR/OR for FLASH. + +* Patch by Jon Loeliger 08 Feb 2005 + Determine L2 Cache size dynamically on 85XX boards. + +* Patch by Jon Loeliger, Kumar Gala 08 Feb 2005 + - Convert the CPM2 based functionality to use new CONFIG_CPM2 + option rather than a myriad of CONFIG_MPC8560-like variants. + Applies to MPC85xx and MPC8260 boards, includes stxgp3 and sbc8560. + Eliminates the CONFIG_MPC8560 option entirely. Distributes the + new CONFIG_CPM2 option to each 8260 board. + +* Add support for MicroSys PM856 board + Patch by Josef Wagner, 03 Aug 2005 + +* Minor fixes to PM854 board + Patch by Josef Wagner, 03 Aug 2005 + +* Adjust configuration of XENIAX board + (chip select and GPIO required for USB operation) + +* Fix typos in cpu/85xx/start.S which caused DataTLB exception to be + routed to the Watchdog handler + Patch by Eugene Surovegin, 18 Jun 2005 + +* (re)enabled scsi commands do_scsi() and do_scsiboot() + Patch by Denis Peter, 06 Dec 2004 + +* Fix endianess problem in TFTP / NFS default filenames + Patch by Hiroshi Ito, 06 Dec 2004 + +* Ignore broadcast status bit in received frames in 8260 FCC ethernet + loopback test code + Patch by Murray Jensen, 18 Jul 2005 + +* Fix typo in mkconfig script (used == instead of =) + Patch by Murray Jensen, 18 Jul 2005 + +* Cleanup build problems on 64 bit build hosts + +* Update MAINTAINERS file + +* Patch by Stefan Roese, 01 Aug 2005: + - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea + (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup" + for details. + - Sycamore (PPC405GPr) eval board added (Walnut port is extended + to run on both 405GP and 405GPr eval boards). + +* Patch by Steven Blakeslee, 27 Jul 2005: + - Add support for AMCC PPC440EP/GR. + - Add support for AMCC Yosemite PPC440EP eval board. + - Add support for AMCC Yellowstone PPC440GR eval board. + +* Minor fixes for PPChameleon Board: + - fix alignment of NAND size + - make code do what the comment says + +* Implement h/w sector protection status synchronization at boot. + The code is provided for, and was tested on, the Yukon/Alaska + and PM520 boards only. + + A bug in flash_real_protect() for the Yukon board was fixed by + adding a function that tells if two banks are on one flash chip. + +* Fix sysmon POST problem: check I2C error codes + This fixes a problem of displaying bogus voltages when the voltages + are so low that the I2C devices start failing while the rest of the + system keeps running. + +* Patch by Cedric Vincent, 6 Jul 2005: + Fix CFG_CMD_SETGETDCR handling in "common/cmd_dcr.c" + +* Patch by Jon Loeliger, 20 Jul 2005: + Add missing PCI IO port definitions. + +* Add CompactFlash support for HMI1001 board. + +* Adjust printed board ID for LWMON board. + +* Fix low-level OHCI transfers for ARM920t and MPC5xxx + +* Add new argument format for flash commands to allow for usage like + "erase $(addr) +$(filesize)", i. e. a size argument can be used and + U-Boot will automaticially find the end of the corresponding sector. + +* Patch by Stefan Roese, 5 Jul 2005: + Update uc100 board PHY setup + +* Patch by Stefan Roese, 1 Jul 2005: + Fix PHY address for CATcenter board (now correct!) + +* Patch by Stefan Roese, 30 Jun 2005: + Fix PHY addresses for PPChameleon and CATcenter boards + Change MAINTAINER for most esd boards + +* Patch by Detlev Zundel, 30 Jun 2005: + Fix LCD logo for lwmon board which got lost in the merge of 8xx and PXA LCD code + +* Fix baudrate calculation problem on MPC5200 systems + +* Add EEPROM and RTC support for HMI1001 board + +* Patch by Detlev Zundel, 20 Jun 2005: + Fix initialization of low active GPIO pins on inka4x0 board + +* Enable redundant environment, disable HW flash protection of + HMI1001 board + +* Patch by Travis Sawyer, 10 Jun 2005: + Initialize allocated dev and private hw structures + after their respective allocation in 440gx_enet.c + +* Patch by Steven Scholz, 10 Jun 2005: + Fix byteorder problems with second argument of "bootm" with + standalone images; + +* Add support for HMI1001 board + +* Disable "date" and "sntp" commands on TQM866M + +* Fix watchdog reset problems on LWMON board + +* Patch by Juergen Selent, 17 May 2005: + Add support for Funkwerk VoVPN gateway module. + +* Cleanup debug code for MPC8220 FEC driver + +* Extend burst mode RAM test program to take a loop count + (0 = infinite) + +* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on + those boards that use it. + +* Patches by Greg Ungerer, 19 May 2005: + - add support for the KS8695P (ARM 922 based) CPU + - add support for the OpenGear CM4008, CM4116 and CM4148 boards + +* Patch by Steven Scholz, 19 May 2005: + Add support for CONFIG_SERIAL_TAG on ARM boards + +* Add PCI support for Sorcery board. + Code cleanup (especially Sorcery / Alaska / Yukon serial driver). + +* Fix compile problems caused by new burst mode SDRAM test; + make port pins to trigger logic analyzer configurable + +* Fix timer handling on MPC85xx systems + +* Fix debug code in omap5912osk flash driver + +* Add support for MPC8247 based "IDS8247" board. + +* Add support for 2 x TSEC interfaces on the TQM8540 board. + +* On LWMON we must use the watchdog to reset the board as the CPU + genereated HRESET pulse is too short to reset the external + circuitry. + +* Add test tool to exercise SDRAM accesses in burst mode + (as standalone program, MPC8xx/PowerPC only) + +* Increase CFG_MONITOR_LEN for Rattler board to match actual code + size. + +* Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of + March 13, 2005); new configuration option CONFIG_JFFS2_LZO_LZARI + added to support LZO and LZARI compression modes (undefined by + default). + +* Fix problem with symbolic links in JFFS2 code. + +* Use linker ASSERT statement to prevent undetected overlapping of + sections on PPChameleon board; other boards might use this, too. + +* Patch by Stefan Roese, 03 May 2005: + Update for P3G4 + Fix problems in cmd_universe.c + +* Patch by Matthias Fuchs, 03 May 2005: + Added missing variable declaration in cmd_nand.c + Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram + +* Fix INKA4x0: use CS1 as gpio_wkup_6 output + +* Fix bug in the SDRAM initialization code for canmb, IceCube and + PM520 boards. + Fix PHY address for canmb board. + +* Cleanup serial console baudrate calculation on AT91RM9200; + get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition + +* Patch by Matthias Fuchs, 18 Apr 2005: + Make PCI target address spaces on PMC405 and CPCI405 boards + configurable via environment variables + +* Auto-size RAM on canmb board. + +* Add support for canmb board + +* Patch by Stefan Roese, 13 Apr 2005: + Update for esd apc405 + +* Fixes for TQM8560 board: + - fix clock rates + - remove debug messages + - fix flash sector protection + +* Patch by Steven Scholz, 07 Apr 2005: + Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C + +* Patches by Steven Scholz, 07 Apr 2005: + Fix compiler warning in altera.c + Fix warning in cpu/arm920t/at91rm9200/i2c.c + +* Patch by Ladislav Michl, 06 Apr 2005: + Fix voiceblue configuration. + +* Patch by Stefan Roese, 06 Apr 2005: + Updates for OCOTEA board: + - Changed U-Boot size from 512kByte to 256kByte + - Fixed flash driver to support boot from soldered user flash + - Added README for switch from PIBS firmware to U-Boot + +* Patch by Travis Sawyer, 05 Apr 2005: + - Change timer frequency for ppc 440 from 10 ms to 1 ms. + Problem found by Andrew Wozniak. + +* Patch by Steven Scholz, 06 Apr 2005: + - creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200 + - moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200 + +* Patches by Robert Whaley, 29 Nov 2004: + - update the pxa-regs.h file for PXA27x chips + - add PXA27x based ADSVIX board + - add support for MMC on PXA27x processors + +* Patch by Andrew E. Mileski, 28 Nov 2004: + Fix PPC4xx SPD SDRAM detection bug + +* Patch by Hiroshi Ito, 26 Nov 2004: + Fix logic of "test -z" and "test -n" commands + +* Patch by Ladislav Michl, 05 Apr 2005: + Add support for VoiceBlue board. + +* Patch by Ladislav Michl, 05 Apr 2005: + Fix netboot_common() prototypes. + +* Patch by Steven Scholz, 05 Apr 2005: + Use i.MX watchdog timer for reset_cpu() + +* Patch by Steven Scholz, 05 Apr 2005: + Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific + subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/ + (now in interupts.c) + +* Add support for MPC8220 based "sorcery" board. + +* Add support for TQM8560 board. + +* Add FEC support for TQM8540 board. + Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC + +* Patch by Martin Krause, 04 Apr 2005: + Update default configuration for CMC_PU2 board. + +* Patch by Steven Scholz, 04 Apr 2005: + - remove all references to CONFIG_INIT_CRITICAL for ARM based boards + - introduce two new configuration options instead: + CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT + +* Patch by Steven Scholz, 04 Apr 2005: + Make sure that MDIO clock does not exceed 2.5 MHz on AT91 + +* Fix timer code for ARM systems: make sure that udelay() does not + reset timers so it's save to use udelay() in timeout code. + +* Patch by Mathias Küster, 23 Nov 2004: + add udelay support for the mcf5282 cpu + +* Patch by Tolunay Orkun, 16 November 2004: + fix incorrect onboard Xilinx CPLD base address + +* Patch by Jerry Van Baren, 08 Nov 2004: + - Add low-boot option for MPC8260ADS board (if lowboot is selected, + the jumper for the HRCW source should select flash. If lowboot is + not selected, the jumper for the HRCW source should select the + BCSR. + - change default load base address to 0x00400000 + +* Patch by Yuli Barcohen, 08 Nov 2004: + Add support for Analogue & Micro Rattler boards. + Tested on Rattler8248. + +* Patch by Andre Renaud, 08 Nov 2004: + Fix watchdog support in common/lcd.c + +* Patch by Marc Leeman, 05 Nov 2003: + Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU + bug only affects the XPC8245 processors + +* Patches by Josef Wagner, 29 Oct 2004: + - Add support for MicroSys CPU87 board + - Add support for MicroSys PM854 board + +* Patch by Jian Zhang, 02 Nov 2004: + Add 16-bit NAND support + +* Patch by Scott McNutt, 01 Nov 2004: + Add missing NIOS/NIOS2 support for "iminfo" command + +* Patch by Detlev Zundel, 29 Oct 2004: + Add missing NIOS/NIOS2 support for "mkimage" tool. + +* Patch by David Adair, 27 Oct 2004: + Add missing 440GX SDRAM Controller reset + +* Patch by Steven Scholz, 25 Oct 2004: + Declare reset_cpu() in include/common.h instead locally + +* Patch by Yusdi Santoso, 22 Oct 2004: + - Add support for HIDDEN_DRAGON board + - fix endianess problem in driver/rtl1839.c + +* Patch by Allen Curtis, 21 Oct 2004: + support multiple serial ports + +* Patch by Richard Klingler, 03 Apr 2005: + Add call to eth_halt() in net/net.c when called functions fail + after eth_init() has been called. + +* Patch by Sam Song, 3 April 2005: + - Update README.Netconsole + - Update README + +* Prepare for SoC rework of ARM code: + - rename CONFIG_BOOTBINFUNC into CONFIG_INIT_CRITICAL + - rename memsetup into lowlevel_init (function name and source files) + Patch by Steven Scholz, 03 Apr 2005: + - create SoC specific directories include/asm-arm/arch-imx and + include/asm-arm/arch-s3c24x0 + +* Fix problems with SNTP support; + enable SNTP support in some boards. + +* Patches by Martin Krause, 01 Apr 2005: + - Fix flash erase timeout on CMC_PU2 + - Add automatic HW detection for CMC_PU2 and CMC_BASIC + +* Patch by Steven Scholz, 13 March 2005: + fix cache enabling for AT91RM9200 + +* Patch by Masami Komiya, 30 Mar 2005: + add SNTP support and expand time server and time offset fields of + DHCP support. See doc/README.SNTP + +* Patch by Steven Scholz, 13 Dec 2004: + Fix bug in at91rm920 ethernet driver + +* Patch by Steven Scholz, 13 Dec 2004: + Remove duplicated code by merging memsetup.S files for + at91rm9200 boards into one cpu/at91rm9200/lowlevel.S + +* Patch by Detlev Zundel, 31 Mar 2005: + Cleanup duplicate definition of overwrite_console() + +* Update TQM5200 configuration; + prepare for Rev. 200 starter kit boards + +* Patch by Scott McNutt, 21 Oct 2004: + Add support for Nios-II EPCS Controller core. + +* Patch by Scott McNutt, 20 Oct 2004: + Nios-II cleanups: + - Add sysid command (Nios-II only). + - Locate default exception trampoline at proper offset. + - Implement I/O routines (readb, writeb, etc) + - Implement do_bootm_linux + +* Patches by Martin Krause, 22 Mar 2005: + - use TQM5200_auto as MAKEALL target for TQM5200 systems + - add support for SM501 graphics controller + - add support for graphic console on TQM5200 + - add support for TQM5200 Rev 200 + - cleanup, fix typo in include/configs/TQM5200.h + +* Patch by Manfred Baral, 17 Mar 2005: + Fix typo + +* Fix RTC configuration for PPChameleon board + +* Cleanup, fix typo in include/configs/TQM5200.h + +* Patch by Stefan Roese, 16 Mar 2005: + Update for esd auto_update and hh405 board + +* Adapt for U-Boot image size (new features enabled) on TQM5200 + +* Update code for TQM8540 board (and 85xx in general): + - Change the name of the Ethernet driver: MOTO ENET -> ENET + - Reformat boot messages + - Enable redundant environment + - Replace the -O2 optimization flag with -mno-string + +* Patch by David Brownell, 10 Mar 2005: + Restore copyright statements in OHCI drivers. + +* Add support for TQM8540 board + +* Patch by Detlev Zundel, 14 Mar 2005: + NC650: changed NAND flash addressing to using UPMB + +* Patch by Stefan Roese, 14 Mar 2005: + Update for esd voh405 fpga image + +* INKA4x0: Allow initialization of LCD backlight dimming from + "brightness" environment variable. + +* Add port initialization for digital I/O on INKA4x0 + +* Patch by Stefan Roese, 01 Mar 2005: + Update for esd boards dp405 and hub405 + +* Fix get_partition_info() parameter error in all other calls + (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c). + +* Enable USB and IDE support for INKA4x0 board + +* Patch by Andrew Dyer, 28 Feb 2005: + fix ext2load passing an incorrect pointer to get_partition_info() + resulting in load failure for devices other than 0 + +* Add support for SRAM and 2 x Quad UARTs on INKA4x0 board + +* Cleanup USB and partition defines + +* Add support for ext2 filesystems and image timestamps to TQM5200 board + +* Add reset code for Coral-P on INKA4x0 board + +* Patch by Martin Krause, 28 Jun 2004: + Update for TRAB board. + +* Fix some missing "volatile"s in MPC5xxx FEC driver + +* Fix cirrus voltage detection (for CPC45) + +* Fix byteorder problem in usbboot and scsiboot commands. + +* Patch by Cajus Hahn, 04 Feb 2005: + - don't insist on leading '/' for filename in ext2load + - set default partition to useful value (1) in ext2load + +* Patch by Andrew Dyer, 08 Jan 2005: + fix wrong return codes in ext2 code + +* Removed '--no-warn-mismatch' option from Makefile. This option + makes 'ld' to overlook binary objects compatibility. + +* Moved $(PLATFORM_LIBS) from the library group (--start-group ... + --end-group) outside of the group. This will make 'ld' to do + _multiple_ search in the library group when resolving symbol + references and do only a _single_ seach in libgcc.a after the group + search. + +* Fix stability problems on CPC45 board again. + +* Make image detection for diskboot / usbboot / scsiboot more robust + (also check header checksum) + +* Update CPC45 board configuration. + +* Add USB and PCI support for INKA4x0 board + +* Fix IDE stability problems on CPC45 board (needs 2 x EIEIO). + +* Code cleanup + +* Patch by Robin Getz, 13 Oct 2004: + Add standalone application to change SMC91C111 MAC addresses, + see examples/README.smc91111_eeprom + +* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004: + Fix Flash support for ARM Integrator CP. + +* Patch by Richard Woodruff, 10 Jan 2005: + Update support for OMAP2420 (ARM11) and H4 board: + o clean up and add new types to H4 memory probe code. + o fix to work with internal boot. + o added PRCM config III operation. + o fix marginal flash timings. + o add revison ATAG usage. + o enable voltage scaling at power chip. + o fix compile error for i2c. + +* Fix network problem (error when receiving multiple ARP packets) + +* Patch by Daniel Poirot, 12 Oct 2004: + Add support for Wind River sbc405 board + +* Patch by Rainer Brestan, 12 Oct 2004: + Make examples/Makefile more robust + +* Patch by Sam Song, 11 October 2004: + - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board + - Adjust CPU:BUS frequency ratio 1:1 when core frequency + less than 50MHz + +* Patch by Sam Song, 10 Oct 2004: + Fix a parameter error in run_command() in main.c + +* Patch by Richard Woodruff, 01 Oct 2004: + add support for the TI OMAP2420 processor and its H4 reference + board + +* Patch by Christian Pellegrin, 24 Sep 2004: + Added support for NE2000 compatible (DP8390, DP83902) NICs. + +* Patch by Leif Lindholm, 23 Sep 2004: + add support for the AMD db1550 board + +* Patch by Travis Sawyer, 15 Sep 2004: + Add CONFIG_SERIAL_MULTI support for ppc4xx, + update README.serial_multi + +* Patches by David Snowdon, 07 Sep 2004: + - add u-boot.hex target in the top level Makefile + - add support for the UNSW/NICTA PLEB 2 board (pleb2) + - use -mtune=xscale and -march=armv5 options for PXA + +* Patch by Florian Schlote, 08 Sep 2004: + Add support for SenTec-COBRA5272-board (ColdFire). + +* Patch by Gleb Natapov, 07 Sep 2004: + mpc824x: set PCI latency timer to a sane value + (is 0 after reset). + +* Patch by Kurt Stremerch, 03 Sep 2004: + Add bitstream configuration option for fpga command (Xilinx only). + +* Patch by Kurt Stremerch, 03 Sep 2004: + Add Xilinx Spartan2E family FPGA support + +* Patch by Jeff Angielski, 02 Sep 2004: + Add Added support for H2 revision of the EP8260 board. + Fixed formatting for some of the EP8260 related source files. + +* Patch by Jon Loeliger, 02 Sep 2004: + Reset monitor size back to 256 so environment can be written + to flash on MPC85xx ADS and CDS releases. + +* Patch by Paolo Broggini, 02 Sep 2004: + Make BSS clearing on ARM systems more robust + +* Patch by Yue Hu and Joe, 01 Sep 2004: + - add PCI support for ixp425; + - add EEPRO100 suppor tfor ixdp425 board. + +* Fix problem with protected sector detection in driver/cfi_flash.c + +====================================================================== +Changes for U-Boot 1.1.2: +====================================================================== + +* Code cleanup, mostly for GCC-3.3.x + +* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to + pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for + additional ethernet addresses. + +* Cleanup drivers/i82365.c - avoid duplication of code + +* Fix bogus "cannot span across banks" flash error message + +* Code cleanup + +* Add support for CompactFlash for the CPC45 Board. + +* Fix problems with CMC_PU2 flash driver. + +* Cleanup: + - avoid trigraph warning in fs/ext2/ext2fs.c + - rename UC100 -> uc100 + +* Add support for UC100 board + +* Patch by Stefan Roese, 16 Dez 2004: + - ext2fs support added + - Tundra universe support added + - ColdFire MCF5249 support added (no preloader needed!) + - MCF5249 board TASREG added + - PPC boards added: APC405, CPCI405DT, CPCI750, G2000, HH405, + VOM405, WUH405 + - some esd boards updated + - memory commands "mdc" and "mwc" added for cyclic read/write + (CONFIG_MX_CYCLIC, see README for further description) + +* Add support for INKA4X0 board + +* Patch by Steven Scholz, 12 Dec 2004: + Fix typo in AT91 memory setup. + +* Patch by Martin Krause, 27 Oct 2004: + - add support for "STK52xx" board (including PS/2 multiplexer) + - add hardware detection for TQM5200 + +* Clean up CMC PU2 flash driver + +* Update MAINTAINERS file + +* Fix bug in MPC823 LCD driver + +* Fix udelay() on AT91RM9200 for delays < 1 ms. + +* Enable long help on CMC PU2 board; + fix reset issue; + increase CPU speed from 179 to 207 MHz. + +* Fix smc91111 ethernet driver for Xaeniax board (need to handle + unaligned tail part specially). + +* Update for AT91RM9200DK and CMC_PU2 boards: + - Enable booting directly from flash + - fix CMC_PU2 flash driver + +* Fix mkimage usage message + +* Map SRAM on NC650 board + +* Work around for Ethernet problems on Xaeniax board + +* Patch by TsiChung Liew, 23 Sep 2004: + - add support for MPC8220 CPU + - Add support for Alaska and Yukon boards + +* Fix configuration for ERIC board (needs more room) + +* Adjust MIPS compiler options at run-time depending on tools version + ("-march=4kc -mtune=4kc -Wa,-mips_allow_branch_to_undefined" for new, + "-mcpu=4kc" for old tools) + +* Add passing of the command line and memory size information to the + kernel on xaeniax board. + +* Enable NAND flash support for NC650 board. + +* Patch by Thomas Lange 07 Oct 2004: + Updated README for DBAu1x00 boards to match current status + +* Patch by Philippe Robin, 28 Sept 2004: + Fix Flash support for Versatile. + +* Patch by Roger Blofeld, 16 Sep 2004: + Fix timeout for DHCP command retry + +* Patch by Pantelis Antoniou, 14 Sep 2004: + Fix early serial hang when CONFIG_SERIAL_MULTI is defined. + +* Patch by Pantelis Antoniou, 14 Sep 2004: + Kick watchdog when bz-decompressing + +* Fix CFG_HZ problems on AT91RM9200 systems + [Remember: CFG_HZ should be 1000 on ALL systems!] + +* Patch by Gridish Shlomi, 30 Aug 2004: + - Add support to revA version of PQ27 and PQ27E. + - Reverted MPC8260ADS baudrate back to original 115200 + +* Patch by Hojin, 17 Sep 2004: + Fix typo in cfi_flash.c + +* Patch by Mark Jonas, 09 September 2004: + mtest's data line test (with CFG_ALT_MEMTEST set) returned a wrong + error message + +* Patch by Mark Jonas, 31 August 2004: + Added option CFG_XLB_PIPELINING to enable XLB pipelining. This + improves FTP performance for MPC5200 systems. Enabled for IceCube + by default. + +* Patch by Michael Bendzick, 30 Aug 2004: + - Improve platform.S code for omap1510inn that detects whether code + is running from SDRAM or not. Patch allows SDRAM to be configured + if code is running out of SRAM at 0x20000000. + +* Patch by Frederick Klatt, 30 Aug 2004: + Add support for the Wind River SBC8540/SBC8560 boards + +* Configure SX1 board to use drivers/cfi_flash.c + +* Patches by Michael Bendzick, 30 Aug 2004: + - Configure omap1510inn board to use drivers/cfi_flash.c + - Make drivers/cfi_flash.c protect environment and redundant + environment. + +* Patch by Steven Scholz, 23 Jun 2004: + - Add script (tools/img2brec.sh) to programm U-Boot into + (Synch)Flash using the Bootstrap Mode of the MC9328MX1/L + +* Patches by Scott McNutt, 24 Aug 2004: + - Add support for Altera Nios-II processors. + - Add support for Psyent PCI-5441 board. + - Add support for Psyent PK1C20 board. + +* Patches by Jon Loeliger, 24 Aug 2004: + - Add support for the MPC8541 and MPC8555 CDS boards + - Cleanup eth?addr handling: make dependent on CONFIG_ETH?ADDR + - Convert MPC85xxADS to use common CFI flash driver + - Fix PCI window on MPC85xx; remove unneeded PCI initialization + from board_early_init_f() + - Provide SW workaround for PCI initialization on 85xx CDS + +* Patches by George G. Davis, 24 Aug 2004: + - Enable ramdisk/initrd tagged param support for omap1610h2_config + - Remove static network setup defaults from mx1ads_config + - update ARM boards to use constants from mach-types.h + +* Patch by Gary Jennejohn, 04 Oct 2004: + - fix I2C on at91rm9200 + - add support for Ricoh RS5C372A RTC + +* Patch by Gary Jennejohn, 01 Oct 2004: + - add support for CMC PU2 board + - add support for I2C on at91rm9200 + +* Patch by Gary Jennejohn, 28 Sep 2004: + fix baudrate handling on at91rm9200 + +* Patch by Yuli Barcohen, 22 Aug 2004: + - remove ZPC.1900 board-specific flash driver; + switch the port to generic CFI driver; + - port clean-up + +* Patch by Hinko Kocevar, 21 Aug 2004: + Add calc_fbsize() function used with VIDEOLFB_TAG on TRAB + +* Clean up tools/bmp_logo.c to not add trailing white space + +* Patch by Hinko Kocevar, 21 Aug 2004: + - Group common framebuffer functions in common/lcd.c + - Group common framebuffer macros and #defines in include/lcd.h + - Provide calc_fbsize() for video ATAG + +* Patch by Sam Song, 21 August 2004: + - Fix a typo in README + - Align "(RO)" output for "flinfo" after "protect on" + - Add RESET support for RPXlite_DW board; adjust CPU:BUS frequency + ratio 1:1 when core frequency less than 50MHz + +* Patches by Hinko Kocevar, 21 Aug 2004: + - fix some "use of label at end of compound statement" warnings + - Define type of LCD panel on lubbock board if CONFIG_LCD is used + +* Patch by Steven Scholz, 16 Aug 2004: + - Introducing the concept of SoCs "./cpu/$(CPU)/$(SOC)" + - creating subdirs for SoCs ./cpu/arm920t/imx and ./cpu/arm920t/s3c24x0 + - moving SoC specific code out of cpu/arm920t/ into cpu/arm920t/$(SOC)/ + - moving drivers/s3c24x0_i2c.c and drivers/serial_imx.c out of drivers/ + into cpu/arm920t/$(SOC)/ + +* Patches by Sean Chang, 09 Aug 2004: + - Added support for both 8 and 16 bit mode access to System ACE CF + through MPU. + - Fixed missing System ACE CF device during get FAT partition info + in fat_register_device function. + - Enabled System ACE CF support on ML300. + +* Patch by Sean Chang, 09 Aug 2004: + Synch defines for saveenv and do_saveenv functions so they get + compiled under the same statement. + +* Patch by Sean Chang, 09 Aug 2004: + - Added I2C support for ML300. + - Added support for ML300 to read out its environment information + stored on the EEPROM. + - Added support to use board specific parameters as part of + U-Boot's environment information. + - Updated MLD files to support configuration for new features + above. + +* Patches by Travis Sawyer, 05 Aug 2004: + - Remove incorrect bridge settings for eth group 6 + - Add call to setup bridge in ppc_440x_eth_initialize + - Fix ppc_440x_eth_init to reset the phy only if its the + first time through, otherwise, just check the phy for the + autonegotiated speed/duplex. This allows the use of netconsole + - only print the speed/duplex the first time the phy is reset. + +* Patch by Shlomo Kut, 29 Mar 2004: + Add support for MKS Instruments "Quantum" board + +* Fix build problem with Cogent boards; + avoid using <asm/byteorder.h> when using the host compiler + +* Patch by Ganapathi C, 04 Aug 2004: + Fix NFS timeout issue + +* Patch by Yuli Barcohen, 19 Jul 2004: + - Fix host tools building in Cygwin environment + - Fix header files search order for host tools + +* Patch by Tom Armistead, 19 Jul 2004: + Fix kgdb.S support for 74xx_75x cpu + +* Patch by Jon Loeliger, 15 Jul 2004: + Fix MPC85xx I2C driver + +* Fix problems with CDROM drive as slave device on Lite5200 IDE bus. + +* Patch by Stephen Williams, 15 July 2004 + Set the PCI class code for JSE board as part of PCI interface setup + +* Patch by Michael Bendzick, 15 Jul 2004: + Fix problem with writes with odd sizes in drivers/cfi_flash.c when + CFG_FLASH_USE_BUFFER_WRITE is set + +* Patch by Yuli Barcohen, 13 Jul 2004: + Allow clock setting on MPC866/MPC885 series chips according to + environment variable `cpuclk' + +* Patch by Yuli Barcohen, 20 Apr 2004: + Remove unnecessary redefine of CPM_DATAONLY_SIZE for MPC826x + +* Patch by Vincent Dubey, 24 Sep 2004: + Add support for xaeniax board + +* Add comment about non-GPL character of standalone applications to + COPYING file + +* Fix FEC ethernet problem on NSCU board. + +* Patch by Gary Jennejohn, 09 Sep 2004: + allow to use USART1 as console port on at91rm9200dk boards + +* Patch by Stefan Roese, 16 Sep 2004: + Update AR405 board. + +* Fix SysClk handling for PPChameleon and CATcenter boards + +* Patch by Detlev Zundel, 08 Sep 2004: + Update etags build target + +* Improve NetConsole support: add support for broadcast destination + address and buffered input. + +* Cleanup compiler warnings for GCC 3.3.x and later + +* Fix problem in cmd_jffs2.c introduced by CFG_JFFS_SINGLE_PART patch + +* Add support for IDS "NC650" board + +* Add automatic update support for LWMON board + +* Clear Block Lock-Bits when erasing flash on LWMON board. + +* Fix return code of "fatload" command + +* Enable MSDOS/VFAT filesystem support for LWMON board + +* Patch by Martin Krause, 03 Aug 2004: + change timing for SM501 graphics controller on TQM5200 module + +* Patch by Mark Jonas, 13 July 2004: + - Total5200 LCD now run in little endian mode. Endianess conversion + is done in hardware. + - Removed last reference to "console" environment variable. + +* Patches by Lars Munch, 12 Jul 2004: + - move at45.c to board/at91rm9200dk/ since this is at91rm9200dk + board specific + - split out the LXT971A PHY from ns_9750_eth.h + - split the dm9161 phy part out of at91rm9200_ether.c + +* Patch by Andreas Engel, 12 Jul 2004: + Replaced hardcoded PL011 clock frequency with config variable. + Fixed wrong CONFIG_CMD_DFL doc. + +* Patch by Thomas Viehweger, 09 Jun 2004: + make it possible to remove chpart when there is only one partition + +* Add support for console over UDP (compatible to Ingo Molnar's + netconsole patch under Linux) + +* Patch by Jon Loeliger, 16 Jul 2004: + - support larger DDR memories up to 2G on the PC8540/8560ADS and + STXGP3 boards + - Made MPC8540/8560ADS be 33Mhz PCI by default. + - Removed moldy CONFIG_RAM_AS_FLASH, CFG_FLASH_PORT_WIDTH_16 + and CONFIG_L2_INIT_RAM options. + - Refactor Local Bus initialization out of SDRAM setup. + - Re-implement new version of LBC11/DDR11 errata workarounds. + - Moved board specific PCI init parts out of CPU directory. + - Added TLB entry for PCI-1 IO Memory + - Updated README.mpc85xxads + +* Patch by Sascha Hauer, 28 Jun: + - add generic support for Motorola i.MX architecture + - add support for mx1ads, mx1fs2 and scb9328 boards + +* Patches by Marc Leeman, 23 Jul 2004: + - Add define for the PCI/Memory Buffer Configuration Register + - corrected comments in cpu/mpc824x/cpu_init.c + +* Add support for multiple serial interfaces + (for example to allow modem dial-in / dial-out) + +* Patch by Stefan Roese, 15 Jul 2004: + cpu/ppc4xx/sdram.c rewritten now using get_ram_size() + +* Fix NSCU config; add ethernet wakeup code. + +* Add link for preloader for Motorola ColdFire to README.m68k + +* Patch by Michael Bendzick, 12 Jul 2004: + fix output formatting in drivers/cfi_flash.c + +* Patch by Mark Jonas, 02 Jul 2004: + Fix lowboot (again) on MPC5xxx + +* Patch by Curt Brune, 07 Jul 2004: + relocate exception vectors on arm720t if needed + +* Patch by George G. Davis, 06 Jul 2004: + - update mach-types.h to latest arm.linux.org.uk master list + - Set correct OMAP1610 bi_arch_number for build target + +* Patch by Curt Brune, 06 Jul 2004: + evb4510: add support for timer interrupt; cleanup + +* Patch by Dan Poirot, 06 Jul 2004: + Fix sbc8260 environment variables + +* Cleanup redundand "console" environment variable + +* Patch by Mark Jonas, 05 Jul 2004: + add support for the Total5100's and Total5200's LCD screen + +* Patches by Dan Eisenhut, 01 Jul 2004: + - README fixes. + - Move doc2000.h include to prevent compiler warning on some boards + +* Patch by Mark Jonas, 01 Jul 2004: + Added support for Total5100 and Total5200 (Rev.1 and Rev.2) + MGT5100 and MPC5200 based Freescale platforms. + +* Patch by Philippe Robin, 01 Jul 2004: + Add initialization for Integrator and versatile board files. + +* Patch by Hinko Kocevar, 01 Jun 2004: + Fix VFD FB allocation, add LCD FB allocation on ARM + +* Patch by Martin Krause, 30 Jun 2004: + Add support for TQM5200 board + +* Patch by Martin Krause, 29 Jun 2004: + Add loopw command: infinite write loop on address range + +* Patches by Yasushi Shoji, 29 Jun 2004: + - add empty include/asm-microblaze/processor.h + - add to CREDITS and MAINTAINERS + - add gd initialization + - add MicroBlaze and SUZAKU board to MAKEALL script + - add reset support for SUZAKU + - add flush_cache() for MicroBlaze + - add CFG_FLASH_SIZE to include/configs/suzaku.h since we have fixed + size flash memory on SUZAKU + +* Patch by Prakash Kumar, 27 Jun 2004: + Add support for the PXA250 based Intrinsyc Cerf board. + +* Patch by Yasushi Shoji, 27 Jun 2004: + fix comment in include/common.h + +* Rename SBC8560 into sbc8560 for consistency + +* Patch by Daniel Poirot, 24 Jun 2004: + Add support for Wind River's sbc8240 board + +* Patches by Yasushi Shoji, 26 Jun 2004: + - drivers/serial_xuartlite.c: fix "return 0" in void function + - add microblaze support to mkimage tool + +* Patch by Fred Klatt, 25 Jun 2004: + Add support for WindRiver's sbc8560 board + +* Patch by Nicolas Lacressonniere, 24 Jun 2004 + Small Bugs fixes for "at91rm9200dk" board: + - Timing modifications for SPI DataFlash access + - Fix NAND flash detection bug + +* Patch by Nicolas Lacressonniere, 24 Jun 2004: + Add Support for Flash AT49BV6416 for AT91RM9200DK board + +* Patch by Jon Loeliger, 17 June 2004: + Completion of the 8540ADS/8560ADS updates: + Fix some PCI and Rapid I/O memory maps, + Initialize both TSEC 1 and 2, + Initialize SDRAM + Update MAINTAINER for 85xx boards and README.mpc85xxads + +* Patch by Yuli Barcohen, 16 Jun 2004: + Remove obsolete AdderII port which was superseded by unified + AdderII/Adder87x port + +* Patch by Ladislav Michl, 16 Jun 2004: + Fix gcc-3.3.3 warnings for smc91111.c + +* Patch by Stefan Roese, 02 Jul 2004: + - Fix bug in 405 ethernet driver; allocated data not cleared! + - Fix problem in 405 i2c driver; don't try to print without console! + +* Patch by Paul Ruhland, 11 Jun 2004: + Remove debug code from 'board/lpd7a40x/flash.c' + +* Patch by Andrea Marson, 11 Jun 2004: + Update for PPChameleon board: + - support for SysClk @ 25MHz + - support for Silicon Motion SM712 VGA controller + - some clean ups + +* Patches by Richard Woodruff, 10 Jun 2004: + - fix problems with examples/stubs.c for GCC >= 3.4 + - fix problems with gd initialization + +* Patch by Curt Brune, 17 May 2004: + - Add support for Samsung S3C4510B CPU (ARM7tdmi based SoC) + - Add support for ESPD-Inc. EVB4510 Board + +* Patch by Marc Leeman, 11 May 2004: + Fix for MPC8245 - reading PPC Memory from another device with the + PPC as PCI target device corrupts data due to interenal hardware + buffering. + +* Fix "cls" command when used with splash screen + +* Increase NFS download timeout (now 1 min - 10 sec is to short for a + slow download of a big image) + +* Add "cls" function to MPC823 LCD driver so we can reinitialize the + display even after showing a bitmap + +* Patch by Josef Wagner, 04 Jun 2004: + - DDR Ram support for PM520 (MPC5200) + - support for different flash types (PM520) + - USB / IDE / CF-Card / DiskOnChip support for PM520 + - 8 bit boot rom support for PM520/CE520 + - Add auto SDRAM module detection for MicroSys CPC45 board (MPC8245) + - I2C and RTC support for CPC45 + - support of new flash type (28F160C3T) for CPC45 + +* Fix flash parameters passed to Linux for PPChameleon board + +* Remove eth_init() from lib_arm/board.c; it's done in net.net.c. + +* Patch by Paul Ruhland, 10 Jun 2004: + fix support for Logic SDK-LH7A404 board and clean up the + LH7A404 register macros. + +* Patch by Matthew McClintock, 10 Jun 2004: + Modify code to select correct serial clock on Sandpoint8245 + +* Patch by Robert Schwebel, 10 Jun 2004: + Add support for Intel K3 strata flash. + +* Patch by Thomas Brand, 10 Jun 2004: + Fix "loads" command on DK1S10 board + +* Patch by Yuli Barcohen, 09 Jun 2004: + Add support for 8MB flash SIMM and JFFS2 file system on + Motorola FADS board and its derivatives (MPC86xADS, MPC885ADS). + +* Patch by Yuli Barcohen, 09 Jun 2004: + Add support for Analogue&Micro Adder87x and the older AdderII board. + +* Patch by Ming-Len Wu, 09 Jun 2004: + Add suppport for MC9328 (Dargonball) CPU and Motorola MX1ADS board + +* Patch by Sam Song, 09 Jun 2004: + - Add support for RPXlite_DW board + - Update FLASH driver for 4*AM29DL323DB90VI + - Add option configuration of CFG_ENV_IS_IN_NVRAM on RPXlite_DW board + +* Patch by Mark Jonas, 08 June 2004: + - Make MPC5200 boards evaluate the SVR to print processor name and + version in checkcpu() (cpu/mpc5xxx/cpu.c). + +* Patch by Kai-Uwe Bloem, 06 May 2004: + Fix endianess problem in cramfs code + +* Patch by Tom Armistead, 04 Jun 2004: + Add support for MAX6900 RTC + +* Patches by Ladislav Michl, 03 Jun 2004: + - fix cfi_flash.c on LE systems + - let 'make mrproper' delete u-boot.img as well + - turn printf into debug in cfi_flash.c + +* Patch by Kurt Stremerch, 28 May 2004: + Add support for Exys XSEngine board + +* Patch by Martin Krause, 27 May 2004: + Fix a MPC5xxx I2C timing issue in i2c_probe(). + +* Patch by Leif Lindholm, 27 May 2004: + Fix board_init_f() for dbau1x00 board. + +* Patch by Imre Deak, 26 May 2004: + On OMAP1610 platforms check if booting from RAM(CS0) or flash(CS3). + Set flash base accordingly, and decide whether to do or skip board + specific setup steps. + +* Patch by Josef Baumgartner, 26 May 2004: + Add missing define in include/asm-m68k/global_data.h + +* Patch by Josef Baumgartner, 25 May 2004: + Add missing functions get_ticks() and get_tbclk() in lib_m68k/time.c + +* Patch by Paul Ruhland, 24 May 2004: + fix SDRAM initialization for LPD7A400 board. + +* Patch by Jian Zhang, 20 May 2004: + add support for environment in NAND flash + +* Patch by Yuli Barcohen, 20 May 2004: + Add support for Interphase iSPAN boards. + +* Patches by Paul Ruhland, 17 May 2004: + - Add I/O functions to the smc91111 ethernet driver to support the + Logic LPD7A40x boards. + - Add support for the Logic Zoom LH7A40x based SDK board(s), + specifically the LPD7A400. + +* Patches by Robert Schwebel, 15 May 2004: + - call MAC address reading code also for SMSC91C111; + - make SMSC91C111 timeout configurable, remove duplicate code + - fix get_timer() for PXA + - update doc/README.JFFS2 + - use "bootfile" env variable also for jffs2 + +* Patch by Tolunay Orkun, 14 May 2004: + Add support for Cogent CSB472 board (8MB Flash Rev) + +* Patch by Thomas Viehweger, 14 May 2004: + - flash.h: more flash types added + - immap_8260.h: some bits added (useful for RMII) + - cmd_coninfo.c: typo corrected, printf -> puts + - reduced size by replacing spaces with tab + +* Patch by Robert Schwebel, 13 May 2004: + Add 'imgextract' command: extract one part of a multi file image. + +* Patches by Jon Loeliger, 11 May 2004: + Dynamically handle REV1 and REV2 MPC85xx parts. + (Jon Loeliger, 10-May-2004). + New consistent memory map and Local Access Window across MPC85xx line. + New CCSRBAR at 0xE000_0000 now. + Add RAPID I/O memory map. + New memory map in README.MPC85xxads + (Kumar Gala, 10-May-2004) + Better board and CPU identification on MPC85xx boards at boot. + (Jon Loeliger, 10-May-2004) + SDRAM clock control fixes on MPC8540ADS & MPC8560 boards. + Some configuration options for MPC8540ADS & MPC8560ADS cleaned up. + (Jim Robertson, 10-May-2004) + Rewrite of the MPC85xx Three Speed Ethernet Controller (TSEC) driver. + Supports multiple PHYs. + (Andy Fleming, 10-May-2004) + Some README.MPC85xxads updates. + (Kumar Gala, 10-May-2004) + Copyright updates for "Freescale" + (Andy Fleming, 10-May-2004) + +* Patch by Stephen Williams, 11 May 2004: + Add flash support for ST M29W040B + Reduce JSE specific flash.c to remove dead code. + +* Patch by Markus Pietrek, 04 May 2004: + Fix clear_bss code for ARM systems (all except s3c44b0 which + doesn't clear BSS at all?) + +* Fix "ping" problem on INC-IP board. Strange problem: + Sometimes the store word instruction hangs while writing to one of + the Switch registers, but only if the next instruction is 16-byte + aligned. Moving the instruction into a separate function somehow + makes the problem go away. + +* Patch by Rishi Bhattacharya, 08 May 2004: + Add support for TI OMAP5912 OSK Board + +* Patch by Sam Song May, 07 May 2004: + Fix typo of UPM table for rmu board + +* Patch by Pantelis Antoniou, 05 May 2004: + - Intracom board update. + - Add Codec POST. + +* Add support for the second Ethernet interface for the 'PPChameleon' + board. + +* Patch by Dave Peverley, 30 Apr 2004: + Add support for OMAP730 Perseus2 Development board + +* Patch by Alan J. Luse, 29 Apr 2004: + Fix flash chip-select (OR0) option register setting on FADS boards. + +* Patch by Alan J. Luse, 29 Apr 2004: + Report MII network speed and duplex setting properly when + auto-negotiate is not enabled. + +* Patch by Jarrett Redd, 29 Apr 2004: + Fix hang on reset on Ocotea board due to flash in wrong mode. + +* Patch by Dave Peverley, 29 Apr 2004: + add MAC address detection to smc91111 driver + +* Patch by David Müller, 28 Apr 2004: + fix typo in lib_arm/board.c + +* Patch by Tolunay Orkun, 20 Apr 2004: + - README update: add CONFIG_CSB272 and csb272_config + - add descriptions for some MII/PHY options, CONFIG_I2CFAST, and + i2cfast environment variable + +* Patch by Yuli Barcohen, 19 Apr 2004: + - Rename DUET_ADS to MPC885ADS + - Rename CONFIG_DUET to CONFIG_MPC885_FAMILY + - Rename CONFIG_866_et_al to CONFIG_MPC866_FAMILY + - Clean up FADS family port to use the new defines + +* Fix PCI support on CPC45 board + +* Patch by Scott McNutt, 25 Apr 2004: + Add Nios GDB/JTAG Console support: + - Add stubs to support gdb via JTAG. + - Add support for console over JTAG. + - Minor cleanup. + +* Add support for CATcenter board (based on PPChameleon ME module) + +* Patch by Klaus Heydeck, 12 May 2004: + Using external watchdog for KUP4 boards in mpc8xx/cpu.c; + load_sernum_ethaddr() for KUP4 boards in lib_ppc/board.c; + various changes to KUP4 board specific files + +* Fix minor network problem on MPC5200: need some delay between + resetting the PHY and sending the first packet. Implemented in a + "natural" way by invoking the PHY reset and initialization code + only once after power on vs. each time the interface is brought up. + +* Add some limited support for low-speed devices to SL811 USB controller + (at least "usb reset" now passes successfully and "usb info" displays + correct information) + +* Change init sequence for multiple network interfaces: initialize + on-chip interfaces before external cards. + +* Fix memory leak in the NAND-specific JFFS2 code + +* Fix SL811 USB controller when attached to a USB hub + +* Fix config option spelling in PM520 config file + +* Fix PHY discovery problem in cpu/mpc8xx/fec.c (introduced by + patches by Pantelis Antoniou, 30 Mar 2004) + +* Fix minor NAND JFFS2 related issue + +* Fixes for SL811 USB controller: + - implement workaround for broken memory stick + - improve error handling + +* Increase packet send timeout to 1 ms in cpu/mpc8xx/scc.c to better + cope with congested networks. + +====================================================================== +Changes for U-Boot 1.1.1: +====================================================================== + +* Patch by Travis Sawyer, 23 Apr 2004: + Fix VSC/CIS 8201 phy descrambler interoperability timing due to + errata from Vitesse Semiconductor. + +* Patch by Philippe Robin, 22 Apr 2004: + Fix ethernet configuration for "versatile" board + +* Patch by Kshitij Gupta, 21 Apr 2004: + Remove busy loop and use MPU timer fr usleep() on OMAP1510/1610 boards + +* Patch by Steven Scholz, 24 Feb 2004: + Fix a bug in AT91RM9200 ethernet driver: + The MII interface is now initialized before accessing the PHY. + +* Patch by John Kerl, 19 Apr 2004: + Use U-boot's miiphy.h for PHY register names, rather than + introducing a new header file. + +* Update pci_ids.h from linux-2.4.26 + +* Patch by Masami Komiya, 19 Apr 2004: + Fix problem cause by VLAN function on little endian architecture + without VLAN environment + +* Clean up the TQM8xx_YYMHz configurations; allow to use the same + binary image for all clock frequencies. Implement run-time + optimization of flash access timing based on the actual bus + frequency. + +* Modify KUP4X board configuration to use SL811 driver for USB memory + sticks (including FAT / VFAT filesystem support) + +* Add SL811 Host Controller Interface driver for USB + +* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README + +* Patch by Pantelis Antoniou, 19 Apr 2004: + Allow to use shell style syntax (i. e. ${var} ) with standard parser. + Minor patches for Intracom boards. + +* Patch by Christian Pell, 19 Apr 2004: + cleanup support for CF/IDE on PCMCIA for PXA25X + +* Temporarily disabled John Kerl's extended MII command code because + "miivals.h" is missing + +* Patches by Mark Jonas, 13 Apr 2004: + - Remove CS0 chip select timing setting from cpu/mpc5xxx/start.S + - Add sync instructions to IceCube SDRAM init code + - Move SDRAM chip constants into seperate include files + - Unify DDR and SDR initialization code + - Unify all IceCube (Lite5xxx) target names + +* Patch by John Kerl, 16 Apr 2004: + Enable ranges in mii command, e.g. mii read 0-1f 0 or + mii read 4-7 18-1a. Also add mii dump subcommand for + pretty-printing standard regs 0-5. + +* Patch by Stephen Williams, 16 April 2004: + fix typo in JSE.h; update MAINTAINERS + +* Patch by Matthew S. McClintock, 14 Apr 2004: + fix initdram function for utx8245 board + +* Patch by Markus Pietrek, 14 Apr 2004: + use ATAG_INITRD2 instead of deprecated ATAG_INITRD tag + +* Patch by Reinhard Meyer, 18 Apr 2004: + provide the IDE Reset Function for EMK 5200 boards + +* Patch by Masami Komiya, 12 Apr 2004: + fix pci_hose_write_config_{byte,word}_via_dword problems + +* Patch by Sangmoon Kim, 12 Apr 2004: + Update max RAM size for debris board + +* Patch by Travis Sawyer, 08 Apr 2004: + Add TLB entry for second DIMM slot on ocotea + +* Patch by Masami Komiya, 08 Apr 2004: + add RTL8169 network driver + +* Patch by Dan Malek, 07 Apr 2004: + - Add support for RPC/STx GP3, Motorola 8560 board + - Update 85xx TSEC driver so it searches MII for first available PHY + and uses that one. + - Add functions to support console MII commands. + +* Patch by Tolunay Orkun, 07 Apr 2004: + Move initialization of bi_iic_fast[] + from board_init_f() to board_init_r() + +* Patch by Yasushi Shoji, 07 Apr 2004: + Cleanup microblaze port + +* Patch by Sangmoon Kim, 07 Apr 2004: + Add auto SDRAM module detection for Debris board + +* Patch by Rune Torgersen, 06 Apr 2004: + - Fix some PCI problems on the MPC8266ADS board + - Fix the location of some PCI entries in the immap structure + +* Patch by Yasushi Shoji, 07 Apr 2004: + - add support for microblaze processors + - add support for AtmarkTechno "suzaku" board + +* Configure PPChameleon board to use redundand environment in flash + +* Configure PPChameleon board to use JFFS2 NAND support. + +* Added support for JFFS2 filesystem (read-only) on top of NAND flash + +* Patch by Rune Torgersen, 16 Apr 2004: + LBA48 fixes + +* Patches by Pantelis Antoniou, 16 Apr 2004: + - add support for a new version of an Intracom board and fix + various other things on others. + - add verify support to the crc32 command (define + CONFIG_CRC32_VERIFY to enable it) + - fix FEC driver for MPC8xx systems: + 1. fix compilation problems for boards that use dynamic + allocation of DPRAM + 2. shut down FEC after network transfers + - HUSH parser fixes: + 1. A new test command was added. This is a simplified version of + the one in the bourne shell. + 2. A new exit command was added which terminates the current + executing script. + 3. Fixed handing of $? (exit code of last executed command) + - Fix some compile problems; + add "once" functionality for the netretry variable + +* Patch by George G. Davis, 02 Apr 2004: + add support for Intel Assabet board + +* Patch by Stephen Williams, 01 Apr 2004: + Add support for Picture Elements JSE board + +* Patch by Christian Pell, 01 Apr 2004: + Add CompactFlash support for PXA systems. + +* Patches by Pantelis Antoniou, 30 Mar 2004: + - add auto-complete support to the U-Boot CLI + - add support for NETTA and NETPHONE boards; fix NETVIA board + - add support for the Epson 156x series of graphical displays + (These displays are serial and not suitable for using a normal + framebuffer console on them) + - add infrastructure needed in order to POST any DSPs in a board + - improve and fix various things in the MPC8xx FEC driver: + 1. The new 87x and 88x series of processors have two FECs, + and the new driver supports them both. + 2. Another change in the 87x/88x series is support for + the RMII (Reduced MII) interface. However numerous + changes are needed to make it work since the PHYs + are connected to the same lines. That means that + you have to address them correctly over the MII + interface. + 3. We now correctly match the MII/RMII interface + configuration to what the PHY reports. + - Fix problem when readingthe MII status register. Due to the + internal design of many PHYs you have to read the register + twice. The problem is more apparent in 10Mbit mode. + - add new mode ".jffs2s" for reading from a NAND device: it just + skips over bad blocks. + - add networking support for VLANs (802.1q), and CDP (Cisco + Discovery Protocol) + - some minor patches / cleanup + +* Patch by Yuli Barcohen, 28 Mar 2004: + - Add support for MPC8272 family including MPC8247/8248/8271/8272 + - Add support for MPC8272ADS evaluation board (another flavour of MPC8260ADS) + - Change configuration method for MPC8260ADS family + +* add startup code to clear the BSS of standalone applications + +* Fix if / elif handling bug in HUSH shell + +====================================================================== +Changes for U-Boot 1.1.0: +====================================================================== + +* Patch by Mark Jonas: Remove config.tmp files only when + unconfiguring the board + +* Adapt RMU board for bigger flash memory + +* Patch by Klaus Heydeck, 13 Mar 2003: + Add support for KUP4X Board + +* Patch by Pavel Bartusek, 21 Mar 2004 + Add Reiserfs support + +* Patch by Hinko Kocevar, 20 Mar 2004 + - Add auto-release for SMSC LAN91c111 driver + - Add save/restore of PTR and PNR regs as suggested in datasheet + +* Patch by Stephen Williams, 19 March 2004 + Increase speed of sector reads from SystemACE, + shorten poll timeout and remove a useless reset + +* Patch by Tolunay Orkun, 19 Mar 2004: + Make GigE PHY 1000Mbps Speed/Duplex detection conditional + (CONFIG_PHY_GIGE) + +* Patch by Brad Kemp, 18 Mar 2004: + prevent machine checks during a PCI scan + +* Patch by Pierre Aubert, 18 Mar 2004: + Fix string cleaning in IDE identification + +* Patch by Pierre Aubert, 18 Mar 2004: + - Unify video mode handling for Chips & Technologies 69000 Video + chip and Silicon Motion SMI 712/710/810 Video chip + - Add selection of the video output (CRT or LCD) via 'videoout' + environment variable for the Silicon Motion + - README update + +* Patch by Pierre Aubert, 18 Mar 2004: + include/common.h typo fix + +* Patches by Tolunay Orkun, 17 Mar 2004: + - Add support for bd->bi_iic_fast[] initialization via environment + variable "i2cfast" (CONFIG_I2CFAST) + - Add "i2cfast" u-boot environment variable support for csb272 + +* Patch by Carl Riechers, 17 Mar 2004: + Ignore '\0' characters in console input for use with telnet and + telco pads. + +* Patch by Leon Kukovec, 17 Mar 2004: + typo fix for strswab prototype #ifdef + +* Patches by Thomas Viehweger, 16 Mar 2004: + - show PCI clock frequency on MPC8260 systems + - add FCC_PSMR_RMII flag for HiP7 processors + - in do_jffs2_fsload(), take load address from load_addr if not set + explicit, update load_addr otherwise + - replaced printf by putc/puts when no formatting is needed + (smaller code size, faster execution) + +* Patch by Phillippe Robin, 16 Mar 2004: + avoid dereferencing NULL pointer in lib_arm/armlinux.c + +* Patch by Stephen Williams, 15 Mar 2004: + Fix CONFIG_SERIAL_SOFTWARE_FIFO documentation + +* Patch by Tolunay Orkun, 15 Mar 2004: + Initialize bi_opbfreq to real OPB frequency via get_OPB_freq() + +* Patch by Travis Sawyer, 15 Mar 2004: + Update CREDITS & MAINTAINERS files for PPC440GX & Ocotea port + +* Add start-up delay to make sure power has stabilized before + attempting to switch on USB on SX1 board. + +* Patch by Josef Wagner, 18 Mar 2004: + - Add support for MicroSys XM250 board (PXA255) + - Add support for MicroSys PM828 board (MPC8280) + - Add support for 32 MB Flash on PM825/826 + - new SDRAM refresh rate for PM825/PM826 + - added support for MicroSys PM520 (MPC5200) + - replaced Query by Identify command in CPU86/flash.c + to support 28F160F3B + +* Fix wrap around problem with udelay() on ARM920T + +* Add support for Macronix flash on TRAB board + +* Patch by Pierre Aubert, 15 Mar 2004: + Fix buffer overflow in IDE identification + +* Fix power-off of LCD for out-of-band temperatures on LWMON board + +* Remove redundand #define in IceCube.h + +* Patch by Steven Scholz, 27 Feb 2004: + - Adding get_ticks() and get_tbclk() for AT91RM9200 + - Many white space fixes in cpu/at91rm9200/interrupts.c + +* Patches by Steven Scholz, 20 Feb 2004: + some cleanup in AT91RM9200 related code + +* Patches by Travis Sawyer, 12 Mar 2004: + - Fix Gigabit Ethernet support for 440GX + - Add Gigabit Ethernet Support to MII PHY utilities + +* Patch by Brad Kemp, 12 Mar 2004: + Fixes for drivers/cfi_flash.c: + - Better support for x8/x16 implementations + - Added failure for AMD chips attempting to use CFG_FLASH_USE_BUFFER_WRITE + - Added defines for AMD command and address constants + +* Patch by Leon Kukovec, 12 Mar 2004: + Fix get_dentfromdir() to correctly handle deleted dentries + +* Patch by George G. Davis, 11 Mar 2004: + Remove hard coded network settings in TI OMAP1610 H2 + default board config + +* Patch by George G. Davis, 11 Mar 2004: + add support for ADS GraphicsClient+ board. + +* Patch by Pierre Aubert, 11 Mar 2004: + - add bitmap command and splash screen support in cfb console + - add [optional] origin in the bitmap display command + +* Patch by Travis Sawyer, 11 Mar 2004: + Fix ocotea board early init interrupt setup. + +* Patch by Thomas Viehweger, 11 Mar 2004: + Remove redundand code; add PCI-specific bits to include/mpc8260.h + +* Patch by Stephan Linz, 09 Mar 2004 + - Add support for the SSV ADNP/ESC1 (Nios Softcore) + +* Patch by George G. Davis, 9 Mar 2004: + fix recent build failure for SA1100 target + +* Patch by Travis Sawyer, 09 Mar 2004: + Support native interrupt mode for the IBM440GX. + Previously it was running in 440GP compatibility mode. + +* Patch by Philippe Robin, 09 Mar 2004: + Added ARM Integrator AP, CP and Versatile PB926EJ-S Reference + Platform support. + +* Patch by Masami Komiya, 08 Mar 2004: + Don't overwrite server IP address or boot file name + when the boot server does not return values + +* Patch by Tolunay Orkun, 5 Mar 2004: + Removed compile time restriction on CFG_I2C_SPEED for DS1338 RTC + +* Patch by Tolunay Orkun, 5 Mar 2004: + Fix early board initialization for Cogent CSB272 board + +* Patch by Ed Okerson, 3 Mar 2004: + fix CFI flash writes for little endian systems + +* Patch by Reinhard Meyer, 01 Mar 2004: + generalize USB and IDE support for MPC5200 with according + changes to IceCube.h and TOP5200.h + add Am29LV256 256 MBit FLASH support for TOP5200 boards + add info about USB and IDE to README + +* Patch by Yuli Barcohen, 4 Mar 2004: + Fix problems with GCC 3.3.x which changed handling of global + variables explicitly initialized to zero (now in .bss instead of + .data as before). + +* Patch by Leon Kukovec, 02 Mar 2004: + add strswab() to fix IDE LBA capacity, firmware and model numbers + on little endian machines + +* Patch by Masami Komiya, 02 Mar 2004: + - Remove get_ticks() from NFS code + - Add verification of RPC transaction ID + +* Patch by Pierre Aubert, 02 Mar 2004: + cleanup for IDE and USB drivers for MPC5200 + +* Patch by Travis Sawyer, 01 Mar 2004: + Ocotea: + - Add IBM PPC440GX Ref Platform support (Ocotea) + Original code by Paul Reynolds <PaulReynolds@lhsolutions.com> + Adapted to U-Boot and 440GX port + 440gx_enet.c: + - Add gracious handling of all Ethernet Pin Selections for 440GX + - Add RGMII selection for Cicada CIS8201 Gigabit PHY + ppc440.h: + - Add needed bit definitions + - Fix formatting + +* Patch by Carl Riechers, 1 Mar 2004: + Add PPC440GX prbdv0 divider to fix memory clock calculation. + +* Patch by Stephan Linz, 27 Feb 2004 + - avoid problems for targets without NFS download support + +* Patch by Rune Torgersen, 27 Feb 2004: + - Added LBA48 support (CONFIG_LBA48 & CFG_64BIT_LBA) + - Added support for 64bit printing in vsprintf (CFG_64BIT_VSPRINTF) + - Added support for 64bit strtoul (CFG_64BIT_STRTOUL) + +* Patch by Masami Komiya, 27 Feb 2004: + Fix rarpboot: add autoload by NFS + +* Patch by Dan Eisenhut, 26 Feb 2004: + fix flash_write return value in saveenv + +* Patch by Stephan Linz, 11 Dec 2003 + expand config.mk to avoid trigraph warnings on NIOS + +* Rename "BMS2003" board into "HMI10" + +* SX1 patches: use "serial#" for USB serial #; use redundand environment + storage; auto-set console on USB port (using preboot command) + +* Add support for SX1 mobile phone; add support for USB-based console + (enable with "setenv stdout usbtty; setenv stdin usbtty") + +* Fix LOWBOOT configuration for MPC5200 with DDR memory + +* Fix SDRAM timings for LITE5200 / IceCube board + +* Handle Auti-MDIX / connection status for INCA-IP + +* Fix USB problems when attempting to read 0 bytes + +* Patch by Travis Sawyer, 26 Feb 2004: + Fix broken compile for XPEDITE1K target. + +* Patch by Stephan Linz, 26 Feb 2004: + Bug fix for NFS code on NIOS targets + +* Patch by Stephen Williams, 26 Feb 2004: + Break up SystemACE reads of large block counts + +* Patch by Pierre Aubert, 26 Feb 2004 + add IDE support for MPC5200 + +* Patch by Masami Komiya, 26 Feb 2004: + add autoload via NFS + +* Patch by Stephen Williams + Use of CONFIG_SERIAL_SOFTWARE_FIFO in board.c consistent with uses + elsewhere in the source. + +* Patch by Steven Scholz, 25 Feb 2004: + - Timeouts in FPGA code should be based on CFG_HZ + - Minor cleanup in code for Altera FPGA ACEX1K + +* Patch by Steven Scholz, 25 Feb 2004: + Changed "Directory Hierarchy" section in README + +* Patch by Masami Komiya, 25 Feb 2004: + Reduce copy count in nfs_read_reply() of NFS code + +* Patch by Markus Pietrek, 24 Feb 2004: + NS9750 DevBoard added + +* Patch by Pierre Aubert, 24 Feb 2004 + add USB support for MPC5200 + +* Patch by Steven Scholz, 24 Feb 2004: + - fix MII commands to use values from last command + +* Patch by Torsten Demke, 24 Feb 2004: + Add support for the eXalion platform (SPSW-8240, F-30, F-300) + +* Patch by Rahul Shanbhag, 19 Feb 2004: + Fixes for for OMAP1610 board: + - shift some IRQ specific code to platform.S file + - remove duplicatewatchdog reset code from start.S + +* Make Auto-MDIX Support configurable on INCA-IP board + +* Fix license for mkimage tool + +* Patch by Masami Komiya, 24 Feb 2004: + Update NetBootFileXferSize in NFS code + +* Patch by Scott McNutt, 24 Feb 2004: + fix packet length in NFS code + +* Patch by Masami Komiy, 22 Feb 2004: + Add support for NFS for file download + +* Patch by Andrea Scian, 17 Feb 2004: + Add support for S3C44B0 processor and DAVE B2 board + +* Patch by Steven Scholz, 20 Feb 2004: + - Add support for MII commands on AT91RM9200 boards + - some cleanup in AT91RM9200 ethernet code + +* Patch by Peter Ryser, 20 Feb 2004: + Add support for the Xilinx ML300 platform + +* Patch by Stephan Linz, 17 Feb 2004: + Fix watchdog support for NIOS + +* Patch by Josh Fryman, 16 Feb 2004: + Fix byte-swapping for cfi_flash.c for different bus widths + +* Patch by Jon Diekema, 14 Jeb 2004: + Remove duplicate "FPGA Support" notes from the README file + +* Patches by Reinhard Meyer, 14 Feb 2004: + - update board/emk tree; use common flash driver + - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c + [adapted for other PPC CPUs -- wd] + - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c + +* Patch by Jon Diekema, 13 Feb 2004: + Call show_boot_progress() whenever POST "FAILED" is printed. + +* Patch by Nishant Kamat, 13 Feb 2004: + Add support for TI OMAP1610 H2 Board + Fixes for cpu/arm926ejs/interrupt.c + (based on Richard Woodruff's patch for arm925, 16 Oct 03) + Fix for a timer bug in OMAP1610 Innovator + Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2 + +* Patches by Stephan Linz, 12 Feb 2004: + - add support for NIOS timer with variable period preload counter value + - prepare POST framework support for NIOS targets + +* Patch by Denis Peter, 11 Feb 2004: + add POST support for the MIP405 board + +* Patch by Laurent Mohin, 10 Feb 2004: + Fix buffer overflow in common/usb.c + +* Patch by Tolunay Orkun, 10 Feb 2004: + Add support for Cogent CSB272 board + +* Patch by Thomas Elste, 10 Feb 2004: + Add support for NET+50 CPU and ModNET50 board + +* Patch by Sam Song, 10 Feb 2004: + Fix typos in cfi_flash.c + +* Patch by Leon Kukovec, 10 Feb 2004 + Fixed long dir entry slot id calculation in get_vfatname + +* Patch by Robin Gilks, 10 Feb 2004: + add "itest" command (operators: -eq, -ne, -lt, -gt, -le, -ge, ==, + !=, <>, <, >, <=, >=) + +* Fix problem with side effects in macros in include/usb.h + +* Patch by David Benson, 13 Nov 2003: + bug 841358 - fix TFTP download size limit + +* Fixing bug 850768: + improper flush_cache() in load_serial() + +* Fixing bug 834943: + MPC8540 - missing volatile declarations + +* Patch by Stephen Williams, 09 Feb 2004: + Add support for Xilinx SystemACE chip: + - New files common/cmd_ace.c and include/systemace.h + - Hook systemace support into cmd_fat and the partition manager + +* Patch by Travis Sawyer, 09 Feb 2004: + Add bi_opbfreq & bi_iic_fast to 440GX bd_info as needed for Linux + +* Patch by Travis Sawyer, 09 Feb 2004: + o 440GX: + - Fix PCI Indirect access for type 1 config cycles with ppc440. + - Add phymode for 440 enet + - fix pci pre init + o XPedite1K: + - Change board_pre_init to board_early_init_f + - Add user flash to bus controller setup + - Fix pci pre init + - Fix is_pci_host to check GPIO for monarch bit + - Force xpedite1k to pci conventional mode (via #define option) + +* Patch by Brad Kemp, 4 Feb 2004: + - handle the machine check that is generated during the PCI scans + on 82xx processors. + - define the registers used in the IMMR by the PCI subsystem. + +* Patch by Pierre Aubert, 03 Feb 2004: + cpu/mpc5xxx/start.S: copy MBAR into SPR311 + +* Patch by Jeff Angielski, 03 Feb 2004: + Fix copy & paste error in cpu/mpc8260/pci.c + +* Patch by Reinhard Meyer, 24 Jan 2004: + Fix typo in cpu/mpc5xxx/pci_mpc5200.c + +* Add Auto-MDIX support for INCA-IP + +* Some code cleanup + +* Patch by Josef Baumgartner, 10 Feb 2004: + Fixes for ColdFire port + +* Patch by Brad Kemp, 11 Feb 2004: + Fix CFI flash driver problems + +* Make sure to use a bus clock divider of 2 only when running TQM8xxM + modules at CPU clock frequencies above 66 MHz. + +* Optimize flash programming speed for LWMON (by another 100% :-) + +* Patch by Jian Zhang, 3 Feb 2004: + - Changed the incorrect FAT12BUFSIZE + - data_begin in fsdata can be negative. Changed it to be short. + +* Patches by Stephan Linz, 30 Jan 2004: + 1: - board/altera/common/flash.c:flash_erase(): + o allow interrupts befor get_timer() call + o check-up each erased sector and avoid unexpected timeouts + - board/altera/dk1c20/dk1s10.c:board_early_init_f(): + o enclose sevenseg_set() in cpp condition + - remove the ASMI configuration for DK1S10_standard_32 (never present) + - fix some typed in mistakes in the NIOS documentation + 2: - split DK1C20 configuration into several header files: + o two new files for each NIOS CPU description + o U-Boot related part is remaining in DK1C20.h + 3: - split DK1S10 configuration into several header files: + o two new files for each NIOS CPU description + o U-Boot related part is remaining in DK1S10.h + 4: - Add support for the Microtronix Linux Development Kit + NIOS CPU configuration at the Altera Nios Development Kit, + Stratix Edition (DK-1S10) + 5: - Add documentation for the Altera Nios Development Kit, + Stratix Edition (DK-1S10) + 6: - Add support for the Nios Serial Peripharel Interface (SPI) + (master only) + 7: - Add support for the common U-Boot SPI framework at + RTC driver DS1306 + +* Patch by Rahul Shanbhag, 28 Jan 2004: + Fix flash protection/locking handling for OMAP1610 innovator board. + +* Patch by Rolf Peukert, 28 Jan 2004: + fix flash write problems on CSB226 board (write with 32 bit bus width) + +* Patches by Mark Jonas, 16 Jan 2004: + - fix rounding error when calculating baudrates for MPC5200 PSCs + - make sure CFG_RAMBOOT and CFG_LOWBOOT are not enabled at the same + time which is not supported + +* Patch by Yuli Barcohen, 26 Jan 2004: + Allow bzip2 compression for small memory footprint boards + +* Patch by Brad Kemp, 21 Jan 2004: + Add support for CFI flash driver for both the Intel and the AMD + command sets. + +* Patch by Travis Sawyer, 20 Jan 2004: + Fix pci bridge auto enumeration of sibling p2p bridges. + +* Patch by Tolunay Orkun, 12 Jan 2004: + Add some delays as needed for Intel LXT971A PHY support + +* Patches by Stephan Linz, 09 Jan 2004: + - avoid warning: unused variable `piop' in board/altera/common/sevenseg.c + - make DK1C20 board configuration related to ASMI conform to + documentation + +* Patch by Anders Larsen, 09 Jan 2004: + + ARM memory layout fixes: the abort-stack is now set up in the + correct RAM area, and the BSS is zeroed out as it should be. + + Furthermore, the magic variables 'armboot_end' and 'armboot_end_data' + of the linker scripts are replaced by '__bss_start' and '_end', + resp., which is a further step to eliminate unnecessary differences + between the implementation of the CPU architectures. + +* Patch by liang a lei, 9 Jan 2004: + Fix Intel 28F128J3 ID in include/flash.h + +* Patch by Masami Komiya, 09 Jan 2004: + add support for TB0229 board (NEC VR4131 MIPS processor) + +* Patch by Leon Kukovec, 12 Dec 2003: + changed extern __inline__ into static __inline__ in + include/linux/byteorder/swab.h + +* Patch by Travis Sawyer, 30 Dec 2003: + Add support for IBM PPC440GX. Multiple EMAC Ethernet devices, + select MDI port based on enabled EMAC device. + Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX + base PrPMC board. + +* Patch by Wolter Kamphuis, 15 Dec 2003: + made CONFIG_SILENT_CONSOLE usable on all architectures + +* Disable date command on TQM866M - there is no RTC on MPC866 + +* Fix variable CPU clock for MPC859/866 systems for low CPU clocks + +* Implement adaptive SDRAM timing configuration based on actual CPU + clock frequency for INCA-IP; fix problem with board hanging when + switching from 150MHz to 100MHz + +* Add PCMCIA CS support for BMS2003 board + +* Add variable CPU clock for MPC859/866 systems (so far only TQM866M): + see doc/README.MPC866 for details; + implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866; + calculate CPU clock frequency from PLL register values. + +* Add support for 128 MB RAM on TQM8xxL/M modules + +* Fix PS/2 keyboard problem caused by statically initialized variable + pointing to a location in flash + +* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130. + +* The PS/2 mux on the BMS2003 board needs 450 ms after power on + before we can access it; add delay in case we are faster (with no + CF card inserted) + +* Cleanup of some init functions + +* Make sure SCC Ethernet is always stopped by the time we boot Linux + to avoid Linux crashes by early packets coming in. + +* Accelerate flash accesses on LWMON board by using buffered writes + +* Fix typo in Makefile; + fix problem with PARTNUM detection + +* Patch by Reinhard Meyer, 09 Jan 2004: + - add RTC support for MPC5200 based boards (requires RTC_XTAL) + +* Add support for IDE LED on BMS2003 board + (exclusive with status LED!) + +* Add support for PS/2 keyboard (used with PS/2 multiplexor on + BMS2003 board) + +* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004: + Add common files for "emk" boards + +* Add a common get_ram_size() function and modify the the + board-specific files to invoke that common implementation. + +====================================================================== +Changes for U-Boot 1.0.1: +====================================================================== + +* Set default clock for INCA-IP to 150 MHz + +* Make BMS2003 use a separate config file to avoid #ifdef mess; + add I2C support; add support for DS1337 RTC + +* Add CompactFlash support for BMS2003 board + +* Add support for status LED on BMS2003 board + +* Patch by Scott McNutt, 02 Jan 2004: + Add support for the Nios Active Serial Memory Interface (ASMI) + on Cyclone devices + +* Patch by Andrea Marson, 16 Dec 2003: + Add support for the PPChameleon ME and HI modules + +* Patch by Yuli Barcohen, 22 Dec 2003: + Add support for Motorola DUET ADS board (MPC87x/88x) + +* Patch by Robert Schwebel, 15 Dec 2003: + add support for cramfs (uses JFFS2 command interface) + +* Patches by Stephan Linz, 11 Dec 2003: + - more documentation for NIOS port + - new struct nios_pio_t, struct nios_spi_t + - Reconfiguration for NIOS Development Kit DK1C20: + o move board related code from board/dk1c20 + to board/altera/dk1c20 + o create a new common source path board/altera/common + and move generic flash access stuff into it + o change/expand configuration file DK1C20.h + - Add support for NIOS Development Kit DK1S10 + - Add status LED support for NIOS systems + - Add dual 7-segment LED support for Altera NIOS DevKits + +* Patch by Ronen Shitrit, 10 Dec 2003: + Add support for the Marvell DB64360 / DB64460 development boards + +* Patch by Detlev Zundel, 10 Dec 2003: + fix dependency problem in examples/Makefile + +* Patch by Denis Peter, 8 Dec 2003 + - add support for the PATI board (MPC555) + - add SPI support for the MPC5xx + +* Patch by Anders Larsen, 08 Dec 2003: + add configuration options CONFIG_SERIAL_TAG and CONFIG_REVISION_TAG + to pass ATAG_SERIAL and ATAG_REVISION, resp., to the ARM target; + cleanup some redundand #defines + +* Patch by André Schwarz, 8 Dec 2003: + fixes for Davicom DM9102A Ethernet Chip (#define CONFIG_TULIP_FIX_DAVICOM): + - TX and RX deskriptors must be quad-word aligned + - does not work with only one TX deskriptor + - standard reset method does not work + +* Patch by Masami Komiya, 08 Dec 2003: + add RTL8139 ethernet driver + +* Patches by Ed Okerson, 07 Dec 2003: + - fix ethernet for the AU1x00 processors in little-endian mode. + - extend memsetup.S for the AU1x00 processors in BE and LE modes + +* Minor code cleanup (coding style) + +* Patch by Reinhard Meyer, 30 Dec 2003: + - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE, + - added CONFIG_PHY_ADDR to include/configs/IceCube.h, + - turned debug print of PHY registers into a function (called in two places) + - added support for EMK MPC5200 based modules + +* Fix MPC8xx PLPRCR_MFD_SHIFT typo + +* Add support for TQM866M modules + +* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash) + +* Fix a few compiler warnings + +* Patch by Reinhard Meyer, 28 Dec 2003: + Add initial support for TOP5200 board + +* Make CPU clock on ICA-IP board controllable by a "cpuclk" + environment variable which can set to "100", "133", or "150". The + CPU clock will be configured accordingly upon next reboot. Other + values are ignored. In case of an invalid or undefined "cpuclk" + value, the compile-time default CPU clock speed will be used. + +* Enable Quad-UART on BMS2003 board (initialize the PCMCIA memory + window that is used to access the UART registers by the Linux driver) + +* Patch by Reinhard Meyer, 20 Dec 2003: + Fix clock calculation for the MPC5200 for higher clock frequencies + (above 2**32 / 10 = 429.5 MHz). + +* Fix CONFIG_PLL_PCI_TO_MEM_MULTIPLIER divider error in SP8240 configuration + +* Fix IceCube CLKIN configuration (it's 33.000000MHz) + +* Add new configuration for IceCube board with DDR memory + +* Update TRAB memory configurations + +* Add JFFS2 support for INCA-IP board + +* Patch by Bill Hargen, 09 Dec 2003: + - BUBINGA405EP: changed flash driver to protect top sector containing + first instruction. + - BUBINGA405EP: configured "eeprom" command to access boot config EEPROM. + - BUBINGA405EP: fixed PLL init (init chip selects before FPGA/NVRAM access). + - 405EP: fixed SPD-based SDRAM init (only use banks 0 and 1). + - 405EP: added/fixed support for "reginfo" command. + - 4xx: removed spurious MII error messages on "mii info" command. + +* Patch by Bernhard Kuhn, 28 Nov 2003: + add support for ColdFire CPU + add support for Motorola M5272C3 and M5282EVB boards + +* Patch by Pierre Aubert, 24 Nov 2003: + - add a return value for the fpga command + - add ide_preinit() function called in ide_init if CONFIG_IDE_PREINIT + is defined. If ide_preinit fails, ide_init is aborted. + - fix an endianess problem in fat.h + +* Patch by Wolter Kamphuis, 05 Dec 2003: + Add support for SNMC's QS850/QS823/QS860T boards + +* Patch by Yuli Barcohen, 3 Dec 2003: + "revive" U-Boot support for old Motorola MPC860ADS board + +* Patch by Cam(ilo?), 03 Dec 2003: + make examples build even with broken Montavista objcopy + +* Patch by Pavel Bartusek, 27 Nov 2003: + fix conversion problem with "bootretry" evironment variable + +* Patch by Andre Schwarz, 24 Nov 2003: + add support for mvblue (mvBlueLYNX and mvBlueBOX) boards + +* Patch by Pavel Bartusek, 21 Nov 2003: + set ZMII bridge speed on 440 + +* Patch by Anders Larsen, 17 Nov 2003: + Fix mismatched #ifdef / #endif in include/asm-arm/arch-pxa/hardware.h + +* Patches by David Müller, 14 Nov 2003: + - board/mpl/common/common_util.c + * implement support for BZIP2 compressed images + * various cleanups (printf -> puts, ...) + - board/mpl/common/flash.c + * report correct errors to upper layers + * check the erase fail and VPP low bits in status reg + - board/mpl/vcma9/cmd_vcma9.c + - board/mpl/vcma9/flash.c + * various cleanups (printf -> puts, ...) + - common/cmd_usb.c + * fix typo in comment + - cpu/arm920t/usb_ohci.c + * support for S3C2410 is missing in #if line + - drivers/cs8900.c + * reinit some registers in case of error (cable missing, ...) + - fs/fat/fat.c + * support for USB/MMC devices is missing in #if line + - include/configs/MIP405.h + - include/configs/PIP405.h + * enable BZIP2 support + * enlarge malloc space to 1MiB because of BZIP2 support + - include/configs/VCMA9.h + * enable BZIP2 support + * enlarge malloc space to 1MiB because of BZIP2 support + * enable USB support + - lib_arm/armlinux.c + * change calling convention of ARM Linux kernel as + described on http://www.arm.linux.org.uk/developer/booting.php + +* Patch by Thomas Lange, 14 Nov 2003: + Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to + support all these AMD boards. + +* Patch by Thomas Lange, 14 Nov 2003: + Workaround for mips au1x00 physical memory accesses (the au1x00 + uses a 36 bit bus internally and cannot access physical memory + directly. Use the uncached SDRAM address instead of the physical + one.) + +* Patch by Xue Ligong (Joe), 13 Nov 2003: + add Realtek 8019 ethernet driver + +* Patch by Yuli Barcohen, 13 Nov 2003: + MPC826xADS/PQ2FADS cleanup + +* Patch by Anders Larsen, 12 Nov 2003: + Update README to mark the PORTIO commands non-standard + +* Patch by Nicolas Lacressonnière, 12 Nov 2003: + update for for Atmel AT91RM9200DK development kit: + - support for environment variables in DataFlash + - Atmel DataFlash AT45DB1282 support + +* Patch by Jeff Carr, 11 Nov 2003: + add support for new version of 8270 processors + +* Patches by George G. Davis, 05 Nov 2003: + - only pass the ARM linux initrd tag to the kernel when an initrd + is actually present + - update omap1510inn configuration file + +* Patches by Stephan Linz, 3 Nov 2003: + - more endianess fixes for LAN91C111 driver + - CFG_HZ configuration patch for NIOS Cyclone board + +* Patch by Stephan Linz, 28 Oct 2003: + fix PHY_INT_REG vs. PHY_MASK_REG bug in drivers/smc91111.c + +* Patch by Steven Scholz, 20 Oct 2003: + - make "mii info <addr>" show infor for PHY at "addr" only + - Endian fix for miiphy_info() + +* Patch by Gleb Natapov, 19 Sep 2003: + Move most of the timer interrupt related PPC code to ppc_lib/interrupts.c + +* Patch by Anders Larsen, 17 Sep 2003: + Bring ARM memory layout in sync with the documentation: + stack and malloc-heap are now located _below_ the U-Boot code + +* Accelerate booting on TRAB board: read and check autoupdate image + headers first instead of always reading the whole images. + +* Fix type in MPC5XXX code (pointed out by Victor Wren) + +* Enabled password check on RMU board + +* Fix configuration problem with IceCube in LOWBOOT configuration: + envrionment got embedded, corrupting the image layout. + +* Fix NEC display names (it's 6440 [for 640x480], not 6640). + +* Added BMS2003 board + add support for NEC NL6448BC33-54. 10.4", 640x480 TFT display + +* Fix flash driver for TRAB board (must use Unlock Bypass Reset + command to exit Unlock Bypass Mode); adjust timings for flash, SRAM + and CPLD + +* Use "-fPIC" instead of "-mrelocatable" to prevent problems with + recent tools + +* Add checksum verification to 'imls' command + +* Add bd_info fields needed for 4xx Linux I2C driver + +* Patch by Martin Krause, 4 Nov. 2003: + Fix error in cmd_vfd.c (TRAB board: "vfd /1" shows now only one Bitmap) + +* Print used network interface when CONFIG_NET_MULTI is set + +* Patch by Bernhard Kuhn, 28 Oct 2003: + Add low boot support for MPC5200 + +* Fix problem with dual PCMCIA support (NSCU) + +* Fix MPC5200 I2C initialization function + +====================================================================== +Changes for U-Boot 1.0.0: +====================================================================== + +* Fix parameter passing to standalone images with bootm command + +* Patch by Kyle Harris, 30 Oct 2003: + Fix build errors for ixdp425 board + +* Patch by David M. Horn, 29 Oct 2003: + Fixes to build under CYGWIN + +* Get IceCube MGT5100 working (again) + +* Fix problems in memory test on some boards (which was not + non-destructive as intended) + +* Patch by Gary Jennejohn, 28 Oct 2003: + Change fs/fat/fat.c to put I/O buffers in BSS instead on the stack + to prevent stack overflow on ARM systems + +* Patch by Stephan Linz, 28 Oct 2003: + fix init sequence error for NIOS port + +* Allow lowercase spelling for IceCube_5200; support MPC5200LITE name + +* Add CONFIG_VERSION_VARIABLE to TRAB configuration + +* Patch by Xiao Xianghua, 23 Oct 2003: + small patch for mpc85xx + +* Fix small problem in MPC5200 I2C driver + +* Fix FCC3 support on ATC board + +* Correct header printing for multi-image files in do_bootm() + +* Make CONFIG_SILENT_CONSOLE work with CONFIG_AUTOBOOT_KEYED + +* Fix PCI problems on PPChameleon board + +* Patch by Steven Scholz, 18 Oct 2003: + Fix AT91RM9200 ethernet driver - Add monitor functions for indirect access to PPC440 DCR's - Patch by Leonid Baryudin, 12 Oct 2006 +* Patch by Nye Liu, 17 Oct 2003: + Fix typo in include/mpc8xx.h -commit 5f3249a0a168e446a4cc9669b2bce0bc456f0a09 -Author: Jon Loeliger <jdl@freescale.com> -Date: Fri Oct 13 16:47:53 2006 -0500 +* Patch by Richard Woodruff, 16 Oct 03: + Fixes for cpu/arm925/interrupt.c + - Initialize timestamp & lastdec vars. + - fix timestamp overflows. + - fix lastdec overflow. + - smarter normalization to allow udelay() below 1ms to work. - Fixed leading whitespace issues. - Removed spurious LAWAR thing. +* Patch by Scott McNutt, 16 Oct + add networking support for the Altera Nios Development Kit, + Cyclone Edition (DK-1C20) - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Patch by Jon Diekema, 14 Oct 2003: + add hint about doc/README.silent to README file -commit 0ee90cb77e01d6e8ccd37e1bd96678597875c391 -Author: Jon Loeliger <jdl@freescale.com> -Date: Thu Oct 12 10:42:36 2006 -0500 +* Add CompactFlash support for NSCU - Remove unneeded include files and local variable. +* Fix PCI problems on PPChameleonEVB - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* TRAB auto-update: Base decision if we have to strip the image + header on image type as encoded in the header + (include image type patch by Martin Krause, 17 Oct 2003) -commit 1eaf3a5ff4960a46f3a9063568ba2af7883f07c5 -Author: Grant Likely <grant.likely@secretlab.ca> -Date: Tue Oct 10 00:23:32 2006 -0600 +* Patches by Xianghua Xiao, 15 Oct 2003: - Fix possible uninitialized variable compiler warning. + - Added Motorola CPU 8540/8560 support (cpu/85xx) + - Added Motorola MPC8540ADS board support (board/mpc8540ads) + - Added Motorola MPC8560ADS board support (board/mpc8560ads) - When CONFIG_OF_FLAG_TREE is set, the compiler complains that 'len' in - do_bootm_linux() may be uninitialized. There is no possibility in the - current code that len will get used uninitialized, but this fix follows - the existing convention of setting both len and data to zero at the same - time. +* Fix flash timings on TRAB board - Signed-off-by: Grant Likely <grant.likely@secretlab.ca> +* Make sure HUSH is initialized for running auto-update scripts -commit 7376eb87aaa601f728f9b8e5e9cd2711a67f529e -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Oct 11 15:13:01 2006 -0500 +* Make 5200 reset command _really_ reset the board, without running + any other code after it - * Fix a bunch of compiler warnings for gcc 4.0 +* Fix errors with flash erase when range spans across banks + that are mapped in reverse order - Signed-off-by: Matthew McClintock <msm@freescale.com> +* Fix flash mapping and display on P3G4 board -commit bf651baa365e5447246aad6a633ccd667cf24a39 -Author: Jon Loeliger <jdl@freescale.com> -Date: Wed Oct 11 10:10:43 2006 -0500 +* Patch by Kyle Harris, 15 Jul 2003: + - add support for Intel IXP425 CPU + - add support for IXDP425 eval board - Move "ar" flags to config.mk to allow for silent "make -s" +* Added config option CONFIG_SILENT_CONSOLE. See doc/README.silent + for more information -commit 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Oct 10 17:19:03 2006 -0500 +* Patch by Steven Scholz, 10 Oct 2003 + - Add support for Altera FPGA ACEX1K - Coding style changes to remove local varible blocks - and reformat a bit nicer. +* Patches by Thomas Lange, 09 Oct 2003: + - fix cmd_ide.c for non ppc boards (read/write functions did not + add ATA base address) + - fix for shannon board + - #ifdef CONFIG_IDE_8xx_DIRECT some otherwise unused code + - Endian swap ATA identity for all big endian CPUs, not just PPC + - MIPS only: New option CONFIG_MEMSIZE_IN_BYTES for passing memsize + args to linux + - add support for dbau1x00 board (MIPS32) -commit 8b283dbb3a08d1b8d406bc15f119e081b3e2606a -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Oct 10 17:16:04 2006 -0500 +* Patch by Sangmoon Kim, 07 Oct 2003: + add support for debris board - Fix whitespace issues. +* Patch by Martin Krause, 09 Oct 2003: + Fixes for TRAB board + - /board/trab/rs485.c: correct baudrate + - /board/trab/cmd_trab.c: bug fix for problem with timer overflow in + udelay(); fix some timing problems with adc controller + - /board/trab/trab_fkt.c: add new commands: gain, eeprom and power; + modify commands: touch and buzzer -commit 7b382b7125f2397cce63253df62f183e3dfa2770 -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Oct 10 17:14:45 2006 -0500 +* Disable CONFIG_SUPPORT_VFAT when used with CONFIG_AUTO_UPDATE + (quick & dirty workaround for rogue pointer problem in get_vfatname()); + Use direct function calls for auto_update instead of hush commands - Fix whitespace issues. +* Patch by Scott McNutt, 04 Oct 2003: + - add support for Altera Nios-32 CPU + - add support for Nios Cyclone Development Kit (DK-1C20) -commit e10390ddd736b0dad1528eec4b0fe35c0827139a -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Oct 10 17:06:53 2006 -0500 +* Patch by Steven Scholz, 29 Sep 2003: + - A second parameter for bootm overwrites the load address for + "Standalone Application" images. + - bootm sets environment variable "filesize" to the resulting + (uncompressed) data length for "Standalone Application" images + when autostart is set to "no". Now you can do something like + if bootm $fpgadata $some_free_ram ; then + fpga load 0 $some_free_ram $filesize + fi - Fix whitespace issues. +* Patch by Denis Peter, 25 Sept 2003: + add support for the MIP405 Rev. C board -commit 89875e96ba3f023157bf50d5f8e33bf254964a76 -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Oct 10 17:03:43 2006 -0500 +* Patch by Yuli Barcohen, 25 Sep 2003: + add support for Zephyr Engineering ZPC.1900 board - Ran lindent and cleaned up whitespace issues. - Format for 80-columns too. +* Patch by Anders Larsen, 23 Sep 2003: + add CMD_PORTIO to CFG_CMD_NONSTD (commands in question are only + implemented for the x86 architecture) -commit 333961ae7095fc66d8a041fce1ac9ee873b09d86 -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Oct 10 17:02:22 2006 -0500 +* Patch by Sangmoon Kim, 23 Sep 2003: + fix pll_pci_to_mem_multiplier table for MPC8245 - Fix whitespace and 80-col issues. +* Patch by Anders Larsen, 22 Sep 2003: + enable timed autoboot on PXA -commit f55df18187e7a45cb73fec4370d12135e6691ae1 -Author: John Traill <john.traill@freescale.com> -Date: Fri Sep 29 08:23:12 2006 +0100 +* Patch by David Müller, 22 Sep 2003: + - add $(CFLAGS) to "-print-libgcc-filename" so compiler driver + returns correct libgcc file path + - "latency" reduction of busy-loop waiting to improve "U-Boot" boot + time on s3c24x0 systems - Fix missing tCycle/modfreq calculation. +* Patch by Jon Diekema, 19 Sep 2003: + - Add CFG_FAULT_ECHO_LINK_DOWN option to echo the inverted Ethernet + link state to the fault LED. + - In NetLoop, make the Fault LED reflect the link status. The link + status gets updated on entry, and on timeouts. - Signed-off-by: John Traill <john.traill@freescale.com> +* Patch by Anders Larsen, 18 Sep 2003: + allow mkimage to build and run on Cygwin-hosted systems -commit 8272dc2f58f2473d8995fcc9b916440cfba080f0 -Author: Andy Fleming <afleming@freescale.com> -Date: Wed Sep 13 10:33:35 2006 -0500 +* Patch by Frank Müller, 18 Sep 2003: + use bi_intfreq instead of bi_busfreq to compute fec_mii_speed in + cpu/mpc8xx/fec.c - Updated config headers to add default FDT-based booting +* Patch by Pantelis Antoniou, 16 Sep 2003: + add tool to compute fileds in the PLPRCR register for MPC86x -commit 09f3e09e9ebcfa7919ca8931a4b5504fadd1f1d3 -Author: Andy Fleming <afleming@freescale.com> -Date: Wed Sep 13 10:34:18 2006 -0500 +* Use IH_TYPE_FILESYSTEM for TRAB "disk" images. - Add support for eTSEC 3 & 4 on 8548 CDS +* Fix build problems under FreeBSD - * Added support for using eTSEC 3 and eTSEC 4 on the 8548 CDS. - This will only work on rev 1.3 boards (but doesn't break older boards) - * Cleaned up some comments to reflect the expanded role of tsec - in other systems +* Add generic filesystem image type -commit 084d648b109c8984f83674043c1a7fa3885ef801 -Author: Andy Fleming <afleming@freescale.com> -Date: Wed Sep 13 10:33:56 2006 -0500 +* Make fatload set filesize environment variable - Added code to support 2.6.18 PCI changes in u-boot +* enable basic / medium / high-end configurations for PPChameleonEVB + board; fix NAND code - * Added code to swizzle the IRQ map for the PCI +* enable TFTP client code to specify to the server the desired + timeout value (see RFC-2349) -commit afbdc649f8751e4f4f1a6f527edfe139773f2c15 -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Sep 19 09:34:10 2006 -0500 +* Improve SDRAM setup for TRAB board - Modified makefile for new build mechanism. +* Suppress all output with splashscreen configured only if "splashimage" + is set - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Fix problems with I2C support for mpc5200 -commit d14ba6a798beb753e7a864500414fcc2d198b8bc -Author: Jon Loeliger <jdl@freescale.com> -Date: Thu Sep 14 08:40:36 2006 -0500 +* Adapt TRAB configuration and auto_update to new memory layout - Handle 86xx SVR values according to the new Reference Manual. - Both 8641 and 8641D have SVR == 0x8090, and are distinguished - by the byte in bits 16-23 instead. - Thanks to Jason Jin for noticing. +* Add configuration for wtk board - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Add support for the Sharp LQ065T9DR51U LCD display -commit 88c8f4921fc47fb0eb2384b16586f1bd7f275be7 -Author: Zhang Wei <wei.zhang@freescale.com> -Date: Mon Aug 28 14:25:31 2006 +0800 +* Patch by Rune Torgersen, 17 Sep 2003: + - Fixes for MPC8266 default config + - Allow eth_loopback_test() on 8260 to use a subset of the FCC's - Fixed an OF-tree off-by-one bug when adding a new property name. - This bug will cause the kernel booting to pause a long time. +* Patches by Jon Diekema, 17 Sep 2003: + - update README (SHOW_BOOT_PROGRESS values for cmd_nand.c and + env_common.c) + - sbc8260 tweaks + - adjust "help" output - Signed-off-by: Zhang Wei <wei.zhang@freescale.com> - (cherry picked from 2f15776ccc6dc32377d8ba9652b8f58059c27c6d commit) +* Patches by Anders Larsen, 17 Sep 2003: + - fix spelling errors + - set GD_FLG_DEVINIT flag only after device function pointers + are valid + - Allow CFG_ALT_MEMTEST on systems where address zero isn't + writeable + - enable 3.rd UART (ST-UART) on PXA(XScale) CPUs + - trigger watchdog while waiting in serial driver -commit 9bff7a69a885adebbd2bd45990494ec4cf998a30 -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Aug 29 11:05:09 2006 -0500 +* Add auto-update code for TRAB board using USB memory sticks, + support new configuration with more memory - Remove trailing empty lines. +* disable MPC5200 bus pipelining as workaround for bus contention -commit cd6d73d5b895a5935ac4fde0a356288142a584e0 -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Aug 29 09:48:49 2006 -0500 +* Modify XLB arbiter priorities on MPC5200 so all devices use same + priority; configure critical interrupts to be handled like external + interrupts - Remove bogus msync and use volatile asm. +* Make IPB clock on MGT5100/MPC5200 configurable in board config file; + go back to 66 MHz for stability -commit 778d45049ce5927b65b3ff1d8e6692b654bdd49e -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Aug 29 08:17:14 2006 -0500 +* Patches by Jon Diekema, 15 Sep 2003: + - add description for missing CFG_CMD_* entries in the README file + - sacsng tweaks - Add myself as maintainer for MPC8641HPCN. +* Patch by Gleb Natapov, 14 Sep 2003: + enable watchdog support for all MPC824x boards that have a watchdog -commit 2f15776ccc6dc32377d8ba9652b8f58059c27c6d -Author: Zhang Wei <wei.zhang@freescale.com> -Date: Mon Aug 28 14:25:31 2006 +0800 +* On MPC5200, restrict FEC to a maximum of 10 Mbps to work around the + "Non-octet Aligned Frame" errors we see at 100 Mbps - Fixed an OF-tree off-by-one bug when adding a new property name. - This bug will cause the kernel booting to pause a long time. +* Patch by Sharad Gupta, 14 Sep 2003: + fix SPR numbers for upper BAT register ([ID]BAT[4-7][UL]) - Signed-off-by: Zhang Wei <wei.zhang@freescale.com> +* Patch by llandre, 11 Sep 2003: + update configuration for PPChameleonEVB board -commit 5567806b67d0ae83493aa8823ad3b6c914f581d7 -Author: Haiying Wang <haiying.wang@freescale.com> -Date: Fri Aug 25 14:38:34 2006 -0400 +* Patch by David Müller, 13 Sep 2003: + various changes to VCMA9 board specific files - Change ramdiskaddr and dtbaddr - Remove PEX fluff commands. +* Add I2C support for MGT5100 / MPC5200 - Signed-off-by: Haiying Wang <haiying.wang@freescale.com> - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Patch by Rune Torgersen, 11 Sep 2003: + Changed default memory option on MPC8266ADS to NOT be Page Based + Interleave, since this doesn't work very well with the standard + 16MB DIMM -commit b2b78421d9db49c21a821af8a19c21c1f7dfb29e -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Aug 23 13:32:45 2006 -0500 +* Patch by George G. Davis, 12 Sep 2003: + fix Makefile settings for sk98 driver - * Another small fix for booting with disable_of +* Patch by Stefan Roese, 12 Sep 2003: + - new boards added: DP405, HUB405, PLU405, VOH405 + - some esd boards updated + - cpu/ppc4xx/sdram.c: disable memory controller before setting + first values + - cpu/ppc4xx/405_pci.c: set vendor id on PPC405EP systems - Signed-off-by: Matthew McClintock <msm@freescale.com> +* Patch by Martin Krause, 11 Sep 2003: + add burn-in tests for TRAB board -commit 4a7cc0f21918e6ecf07ed57075d67df2c4a1299c -Author: Jon Loeliger <jdl@freescale.com> -Date: Wed Aug 23 11:04:43 2006 -0500 +* Enable instruction cache on MPC5200 board - Cleanup and lindent new AHCI driver. +* Patch by Denis Peter, 11 Sep 2003: + - fix USB data pointer assignment for bulk only transfer. + - prevent to display erased directories in FAT filesystem. -commit dabf9ef8c10b4dead5ef2106ef742b1c06b542de -Author: Jin Zhengxiong <jason@bus.ap.freescale.net> -Date: Wed Aug 23 19:15:12 2006 +0800 +* Change output format for NAND flash - make it look like for other + memory, too - Add AHCI define and sata support for MPC8641HPCN board. +====================================================================== +Changes for U-Boot 0.4.8: +====================================================================== - Signed-off-by:Jason Jin<jason.jin@freescale.com> +* Add I2C and RTC support for RMU board -commit 4782ac80b02f0d01afd309e2200dd3c7037f2ba4 -Author: Jin Zhengxiong <jason@bus.ap.freescale.net> -Date: Wed Aug 23 19:10:44 2006 +0800 +* Patches by Denis Peter, 9 Sep 2003: + add FAT support for IDE, SCSI and USB - Add AHCI support to u-boot +* Patches by Gleb Natapov, 2 Sep 2003: + - cleanup of POST code for unsupported architectures + - MPC824x locks way0 of data cache for use as initial RAM; + this patch unlocks it after relocation to RAM and invalidates + the locked entries. - Add AHCI support in u-boot, enable the sata disk controllers which - following the AHCI protocol. +* Patch by Gleb Natapov, 30 Aug 2003: + new I2C driver for mpc107 bridge. Now works from flash. - Signed-off-by:Jason Jin<jason.jin@freescale.com> +* Patch by Dave Ellis, 11 Aug 2003: + - JFFS2: fix typo in common/cmd_jffs2.c + - JFFS2: fix CFG_JFFS2_SORT_FRAGMENTS option + - JFFS2: remove node version 0 warning + - JFFS2: accept JFFS2 PADDING nodes + - SXNI855T: add AM29LV800 support + - SXNI855T: move environment from EEPROM to flash + - SXNI855T: boot from JFFS2 in NOR or NAND flash -commit d8ea2acf5f137cae99417df4f573d036ee384668 -Author: Zhang Wei <wei.zhang@freescale.com> -Date: Wed Aug 23 17:54:32 2006 +0800 +* Patch by Bill Hargen, 11 Aug 2003: + fixes for I2C on MPC8240 + - fix i2c_write routine + - fix iprobe command + - eliminates use of global variables, plus dead code, cleanup. - Add dtb boot-up parameter to default boot commands. +* Add support for USB Mass Storage Devices (BBB) + (tested with USB memory sticks only) - Signed-off-by: Zhang Wei <wei.zhang@freescale.com> +* Avoid flicker on TRAB's VFD -commit b93775c2036b99baa390ea425c4771895bbc63c4 -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Aug 22 18:26:08 2006 -0500 +* Add support for SK98xx driver - Cleanup even more poorly introduced whitespace. +* Add PCI support for SL8245 board -commit ae6241685cbcf0c79a3636530d2ceab1fb291a94 -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Aug 22 18:07:00 2006 -0500 +* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB) + or 1 x AM29LV652 (two LV065 in one chip = 16 MB); + Run IPB at 133 Mhz; adjust the MII clock frequency accordingly - Cleanup more poorly introduced whitespace. +* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz) + to allow for more accurate baudrate settings + (error now 0.7% at 115 kbps, instead of 3.5% before) -commit 2c33e8a1c535b3ae91cf0b284480600bf3f57c57 -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Aug 22 17:54:05 2006 -0500 +* Patch by Andreas Mohr, 4 Sep 2003: + Fix a lot of spelling errors - Cleanup poorly introduced whitespace. +* Add support for PPChameleon Eval Board -commit 80e955c7dd98f4b4fd23c2113caf75ed2b77b5b3 -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Aug 22 12:25:27 2006 -0500 +* Add support for P3G4 board - General indent and whitespace cleanups. +* Fix problem with MGT5100 FEC driver: add "early" MAC address + initialization -commit ffff3ae56f5842ca3679e4ce7922b819a87aad9f -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Aug 22 12:06:18 2006 -0500 +* Patch by Yuli Barcohen, 7 Aug 2003: + check BCSR to detect if the board is configured in PCI mode - General indent and whitespace cleanups. +====================================================================== +Changes for U-Boot 0.4.7: +====================================================================== -commit 41a0e8b304d3ff55fe27a230507aac79684016ac -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue Aug 22 10:42:21 2006 -0500 +* Patch by Raghu Krishnaprasad, 7 Aug 2003: + add support for Adder II MPC852T module - Cleanup compiler warnings. +* Patch by George G. Davis, 19 Aug 2003: + fix TI Innovator/OMAP1510 pin configs -commit 5de62c47a8628b3da4d73f7c07027f32a3342d40 -Author: Matthew McClintock <msm@freescale.com> -Date: Tue Aug 22 09:31:59 2006 -0500 +* Patches by Kshitij, 18 Aug 2003 + - add support for arm926ejs cpu core + - add support for TI OMAP 1610 Innovator Board - Fix disable_of booting +* Patch by Yuli Barcohen, 14 Aug 2003: + add support for bzip2 uncompression - Signed-off-by: Matthew McClintock <msm@freescale.com> +* Add GCC library to examples/Makefile so GCC utility functions will + be resolved, too -commit 87a449c8ac396420cb24260f717ea9e6faa82047 -Author: Matthew McClintock <msm@freescale.com> -Date: Tue Aug 22 09:23:55 2006 -0500 +* Add I2C and RTC support for RMU board using software I2C driver + (because of better response to iprobe command); fix problem with + "reset" command - Support for FDT in uImage format, error when using FDT from flash +* Patch by Matthias Fuchs, 28 Aug 2003: + Added CONFIG_BOOTP_DNS2 and CONFIG_BOOTP_SEND_HOSTNAME to + CONFIG_BOOTP_MAKS (see README). - Signed-off-by: Matthew McClintock <msm@freescale.com> +* Fix ICU862 environment problem -commit 75c299c38369d01addd5e054b8a16217b70f4a86 -Author: Haiying Wang <haiying.wang@freescale.com> -Date: Tue Aug 15 15:12:55 2006 -0400 +* Fix RAM size detection for RMU board - Unlock cache before kernel starts up for MPC86xx +* Implement "reset" for MGT5100/MPC5200 systems -commit 67256678f00c09b0a7f19e862e5c1847553d31bc -Author: Haiying Wang <haiying.wang@freescale.com> -Date: Tue Aug 15 15:13:15 2006 -0400 +====================================================================== +Changes for U-Boot 0.4.6: +====================================================================== - Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR +* Make Ethernet autonegotiation on INCA-IP work for all clock rates; + allow selection of clock frequency as "make" target -commit 1c8f6d8fb028f156094d05f2d14298e6479364ac -Author: Haiying Wang <haiying.wang@freescale.com> -Date: Tue Aug 15 15:12:55 2006 -0400 +* Implement memory autosizing code for IceCube boards - Unlock cache before kernel starts up for MPC86xx +* Configure network port on INCA-IP for autonegotiation -commit 0d9ccc55edf9a7f3c5b2b6263580a6ea8d702a04 -Author: Haiying Wang <haiying.wang@freescale.com> -Date: Tue Aug 15 15:13:15 2006 -0400 +* Fix overflow problem in network timeout code - Copy Global Data Pointer to r29 for DECLARE_GLOBAL_DATA_PTR +* Patch by Richard Woodruff, 8 Aug 2003: + Allow crc32 to be used at address 0x000 (crc32_no_comp, too). -commit 86c8e17f25e972a7e272950a0735fad84e082b88 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Aug 16 13:59:47 2006 -0500 +====================================================================== +Changes for U-Boot 0.4.5: +====================================================================== - * Fix disable_of booting +* Update for TQM board defaults: + disable clocks_in_mhz, enable boot count limit - Signed-off-by: Matthew McClintock <msm@freescale.com> +* Removed tools/gdb from "make all" target. Added make target "gdbtools" + in toplevel directory instead. Removed astest.c from tools/gdb because + it is no longer relevant. -commit 25c751e9adc86e22fe3b5b47cf2806379b575db7 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Aug 16 10:54:09 2006 -0500 +* Fix PCI support for MPC5200 / IceCube Board - * Support for FDT in uImage format, error when using FDT from flash +* Map ISP1362 USB OTG controller for NSCU board - Signed-off-by: Matthew McClintock <msm@freescale.com> +* Patch by Brad Parker, 02 Aug 2003: + fix sc520_cdp problems -commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b -Author: Jon Loeliger <jdl@freescale.com> -Date: Mon Aug 14 15:33:38 2006 -0500 +* Implement Boot Cycle Detection (Req. 2.3 of OSDL CGL Reqirements) - Fix BAT0 to actually be cacheable, non-guarded as documented. +* Allow erase command to cross flash bank boundaries - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Patch by Scott McNutt, 21 Jul 2003: + Add support for LynuxWorks Kernel Downloadable Images (KDIs). + Both LynxOS and BlueCat linux KDIs are supported. -commit 40bc83559db5745681909fd7382ae509567e116d -Author: Jon Loeliger <jdl@freescale.com> -Date: Wed Aug 9 15:32:16 2006 -0500 +* Patch by Richard Woodruff, 25 Jul 2003: + use more reliable reset for OMAP/925T - Removed MPC8641HPCN DTS source file from build. - It is no longer linked into U-Boot; its sources are - now located in the kernel tree. +* Patch by Nye Liu, 25 Jul 2003: + fix typo in mpc8xx.h - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Patch by Richard Woodruff, 24 Jul 2003: + Fixes for cmd_nand.c: + - Fixed null dereferece which could result in incorrect ECC values. + - Added support for devices with no Ready/Busy signal hooked up. + - Added OMAP1510 read/write protect handling. + - Fixed nand.h's ECCPOS. A conflict existed with POS5 and badblock + for non-JFFS2. + - Switched default ECC to be JFFS2. -commit 34c3c0e01dbf1f8cc2bd08de92f2b89ba84921eb -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:47:03 2006 -0500 +* Allow crc32 to be used at address 0x000 - * Switched default PCI speed for 8540 ADS back to 33MHz +* Provide consistent interface to standalone applications to access + the 'global_data' structure + Provide a doc/README.standalone more useful to users/developers. - * Added comments and a printf to warn that PCI-X won't - work at 33MHz - Patch by Andy Fleming 17-Mar-2006 +* Make IceCube MGT5100 FEC driver work - Signed-off-by: Andy Fleming <afleming@freescale.com> +* Implement new mechanism to export U-Boot's functions to standalone + applications: instead of using (PPC-specific) system calls we now + use a jump table; please see doc/README.standalone for details -commit b6c5e1373b6ea0bb37a18e4aeecec00613d1cd39 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:46:35 2006 -0500 +* Patch by Dave Westwood, 24 Jul 2003: + added support for Unity OS (a proprietary OS) - * Fixed a bug where 8555 PCI code used the old variable and function names Patch by Andy Fleming 17-Mar-2006 +* Patch by Detlev Zundel, 23 Jul 2003: + add "imls" command to print flash table of contents - Signed-off-by: Andy Fleming <afleming@freescale.com> +* Fix cold boot detection for log buffer reset -commit bf1dfffd8c26f8ecdd630a0ae4c834e751e4e452 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:46:13 2006 -0500 +* Return error for invalid length specifiers with "cp.X" etc. - * Added VIA configuration table +* Fix startup problem on MIPS - * Added support for PCI2 on CDS - Patch by Andy Fleming 17-Mar-2006 +* Allow for CONFIG_SPLASH_SCREEN even when no explicit + bitmap support is configured - Signed-off-by: Andy Fleming <afleming@freescale.com> +* Patch by Bill Hargen, 18 Jul 2003: + - fix endinaness problem in cpu/mpc824x/drivers/i2c/i2c1.c -commit c88f9fe66b64247e5b6a38410ba315ca25596d16 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:45:41 2006 -0500 +* Patch by Denis Peter, 18 Jul 2003: + - fix memory configuration for MIP405T + - fix printout of baudrate for "loadb <loadaddr> <baudrate>" - * Fixed PCI memory definitions Patch by Andy Fleming 17-Mar-2006 +* Cleanup of TQM82xx configurations; use "official" board types + to make selection easier. - Signed-off-by: Andy Fleming <afleming@freescale.com> +* Patch by Martin Krause, 17 Jul 2003: + add delay to get I2C working with "imm" command and s3c24x0_i2c.c -commit 97074ed9655309b64231bc2cee69fe85399f8055 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:45:17 2006 -0500 +* Patch by Richard Woodruff, 17 July 03: + - Fixed bug in OMAP1510 baud rate divisor settings. - * Added support for initializing second PCI bus on 85xx Patch by Andy Fleming 17-Mar-2006 +* Patch by Nye Liu, 16 July 2003: + MPC860FADS fixes: + - add MPC86xADS support (uses MPC86xADS.h) + - add 866P/T core support (also MPC859T/MPC859DSL/MPC852T) + o PLPRCR changes + o BRG changes (EXTAL/XTAL restricted to 10MHz) + o don't trust gclk() software measurement by default, depend on + CONFIG_8xx_GCLK_FREQ + - add DRAM SIMM not installed detection + - use more "correct" SDRAM initialization sequence + - allow different SDRAM sizes (8xxADS has 8M) + - default DER is 0 + - remove unused MAMR defines from FADS860T.h (all done in fads.c) + - rename MAMR/MBMR defines to be more consistent. Should eventually + be merged into MxMR to better reflect the PowerQUICC datasheet. - Signed-off-by: Andy Fleming <afleming@freescale.com> +* Patch by Yuli Barcohen, 16 Jul 2003: + support new Motorola PQ2FADS-ZU evaluation board which replaced + MPC8260ADS and MPC8266ADS -commit f0e6f57f71b3c4fdd13028eb03c3f3e91926dda2 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:44:49 2006 -0500 +====================================================================== +Changes for U-Boot 0.4.4: +====================================================================== - * Added PCI-X #defines for PCI-X initialization Patch by Andy Fleming on 17-Mar-2006 +* Add support for IceCube board (with MGT5100 and MPC5200 CPUs) - Signed-off-by: Andy Fleming <afleming@freescale.com> +* Add support for MGT5100 and MPC5200 processors -commit a4e11558b810ef2cddffdf7b9d86bc1130441960 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:44:23 2006 -0500 +* Patch by Lutz Dennig, 15 Jul 2003: + update for R360MPI board - * Made sure the code which disables prefetch for PCI devices sets the size of the prefetch region to 0 Patch by Andy Fleming on 17-Mar-2006 +====================================================================== +Changes for U-Boot 0.4.3: +====================================================================== - Signed-off-by: Andy Fleming <afleming@freescale.com> +* Patches by Kshitij, 04 Jul 2003 + - added support for arm925t cpu core + - added support for TI OMAP 1510 Innovator Board -commit 0e16387db1d4aacd5bf35cb6d7c1942765c0347b -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:43:36 2006 -0500 +* Patches by Martin Krause, 14 Jul 2003: + - add I2C support for s3c2400 systems (trab board) + - (re-) add "ping" to command table - * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards Patch by Jon Loeliger 17-Jan-2006 +* Fix handling of "slow" POST routines - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Patches by Yuli Barcohen, 13 Jul 2003: + - Correct flash and JFFS2 support for MPC8260ADS + - fix PVR values and clock generation for PowerQUICC II family + (8270/8275/8280) -commit 855e6fb073f9d04fe4a7f06c107ecbac6344ddd4 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:43:00 2006 -0500 +* Patch by Bernhard Kuhn, 08 Jul 2003: + - add support for M68K targets - * Removed the oftree.dts for stxxtx in light of the changes to the flat device tree handling code Patch by Matthew McClintock 26-June-2006 +* Patch by Ken Chou, 3 Jul: + - Fix PCI config table for A3000 + - Fix iobase for natsemi.c + (PCI_BASE_ADDRESS_0 is the IO base register for DP83815) -commit 5498d90312aad9f6bdbf047986027c35b03cd163 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:42:24 2006 -0500 +* Allow to enable "slow" POST routines by key press on power-on +* Fix temperature dependend switching of LCD backlight on LWMON +* Tweak output format for LWMON - * Patch to modify ft_build.c to update flat device trees in place Patch by Matthew McClintock 26-June-2006 +* Patch by Stefan Roese, 11 Jul 2003: + - Fix bug in CONFIG_VERSION_VARIABLE. + - AR405 config updated. + - OCRTC/ORSG: bsp command added. + - ASH405 bsp update. -commit 0267768eddc5ca7bc1865bc40c866829ac5efbfe -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:41:37 2006 -0500 +====================================================================== +Changes for U-Boot 0.4.2: +====================================================================== - * Modify bootm command to support booting with flat device trees Patch by Matthew McClintock 26-June-2006 +* Add support for NSCU board -commit 8fc8bd2cc479b6cd188fdede4010e0e052970b8a -Author: John Traill <john.traill@freescale.com> -Date: Wed Aug 9 14:33:50 2006 +0100 +* Add support for TQM823M, TQM850M, TQM855M and TQM860M modules - Add Rapidio support for the MPC8641HPCN +* Add support for Am29LV160ML, Am29LV320ML, and Am29LV640ML + mirror bit flash on TQM8xxM modules - Signed-off-by: John Traill <john.traill@freescale.com> +* Patch by Kenneth Johansson, 30 Jun 2003: + get rid of MK_CMD_ENTRY macro; update doc/README.command -commit 91a414c7d1fb0eac912592cd995b30c9f23045c9 -Author: John Traill <john.traill@freescale.com> -Date: Tue Aug 8 11:32:43 2006 +0100 +* Patch by Seb James, 30 Jun 2003: + Improve documentation of I2C configuration in README - Fix caslat calculation +* Fix problems with previous log buffer "fixes" - Signed-off-by: John Traill <john.traill@freescale.com> +* Fix minor help text issues -commit 709d3073e74153278e7904a70819bbef7df50e1a -Author: Jon Loeliger <jdl@freescale.com> -Date: Thu Aug 3 16:17:56 2006 -0500 +* "log append" did not append a newline - Convert to mac-address in ethernet nodes. +====================================================================== +Changes for U-Boot 0.4.1: +====================================================================== + +* Fix some missing commands, cleanup header files + (autoscript, bmp, bsp, fat, mmc, nand, portio, ...) + +* Rewrite command lookup and help command (fix problems with bubble + sort when sorting command name list). Minor cleanup here and there. + +* Merge from "stable branch", tag LABEL_2003_06_28_1800-stable: + - Allow to call sysmon function interactively + - PIC on LWMON board needs delay after power-on + - Add missing RSR definitions for MPC8xx + - Improve log buffer handling: guarantee clean reset after power-on + - Add support for EXBITGEN board (aka "genie") + - Add support for SL8245 board + +* Code cleanup: + - remove trailing white space, trailing empty lines, C++ comments, etc. + - split cmd_boot.c (separate cmd_bdinfo.c and cmd_load.c) + +* Patches by Kenneth Johansson, 25 Jun 2003: + - major rework of command structure + (work done mostly by Michal Cendrowski and Joakim Kristiansen) + +====================================================================== +Changes for U-Boot 0.4.0: +====================================================================== + +* Patches by Robert Schwebel, 26 Jun 2003: + - csb226 configuration updated + - credits for logodl port updated + - innokom configuration updated + - logodl tree update, still with coding style inconsistencies + - added OCM for ppc405 warning to README + +* Patch by Pantelis Antoniou, 25 Jun 2003: + update NetVia with V2 board support + +* Header file cleanup for ARM + +* Patch by Murray Jensen, 24 Jun 2003: + - make sure to use only U-boot provided header files + - fix problems with ".rodata.str1.4" section as used by GCC-3.x + +* Patch by Stefan Roese, 24 Jun 2003: + - Update esd ASH405 board files. + - Update esd DASA_SIM config file. + - Add ping command to some esd boards. + +* Patch by Yuli Barcohen, 23 Jun 2003: + Update for MPC8260ADS board + +* Patch by Murray Jensen, 23 Jun 2003: + - cleanup of GCC 3.x compiler warnings + +* Patch by Rune Torgersen, 4 Jun 2003: + add large memory support for MPC8266ADS board + +* Patch by Richard Woodruff, 19 June 03: + - Enabled standard u-boot device abstraction for ARM + - Enabled console device for ARM + - Initilized bi_baudrate for ARM + +* Patch by Bill Hargen, 23 Apr 2003: + fix byte order for 824x I2C addresses (write op) + +* Patch by Murray Jensen, 20 Jun 2003: + - hymod update + - cleanup (especially for gcc-3.x compilers) + +* Patch by Tom Guilliams, 20 Jun 2003: + added CONFIG_750FX support for IBM 750FX processors + +* Patch by Devin Crumb, 02 Apr 2003: + Fix clock divider rounding problem in drivers/serial.c + +* Patch by Richard Woodruff, 19 June 03: + - Fixed smc91c111 driver to sync with the u-boot environment + (driver/smc91c111.c). + - Added eth_init error return check in NetLoop (net/net.c). + +* Patch by Ken Chou, 19 June 2003: + Added support for A3000 SBC board (Artis Microsystems Inc.) + +* Patches by Murray Jensen, 17 Jun 2003: + - Hymod board database mods: add "who" field and new xilinx chip types + - provide new "init_cmd_timeout()" function so code external to + "common/main.c" can use the "reset_cmd_timeout()" function before + entering the main loop + - add DTT support for adm1021 (new file dtt/adm1021.c; config + slightly different. see include/configs/hymod.h for an example + (requires CONFIG_DTT_ADM1021, CONFIG_DTT_SENSORS, and + CFG_DTT_ADM1021 defined) + - add new "eeprom_probe()" function which has similar args and + behaves in a similar way to "eeprom_read()" etc. + - add 8260 FCC ethernet loopback code (new "eth_loopback_test()" + function which is enabled by defining CONFIG_ETHER_LOOPBACK_TEST) + - gdbtools copyright update + - ensure that set_msr() executes the "sync" and "isync" instructions + after the "mtmsr" instruction in cpu/mpc8260/interrupts.c + - 8260 I/O ports fix: Open Drain should be set last when configuring + - add SIU IRQ defines for 8260 + - allow LDSCRIPT override and OBJCFLAGS initialization: change to + config.mk to allow board configurations to override the GNU + linker script, selected via the LDSCRIPT, make variable, and to + give an initial value to the OBJCFLAGS make variable + - 8260 i2c enhancement: + o correctly extends the timeout depending on the size of all + queued messages for both transmit and receive + o will not continue with receive if transmit times out + o ensures that the error callback is done for all queued tx + and rx messages + o correctly detects both tx and rx timeouts, only delivers one to + the callback, and does not overwrite an earlier error + o logic in i2c_probe now correct + - add "vprintf()" function so that "panic()" function can be + technically correct + - many Hymod board changes + +* Patches by Robert Schwebel, 14 Jun 2003: + - add support for Logotronic DL datalogger board + - cleanup serial line after kermit binary download + - add debugX macro (debug level support) + - update mach-types.h to latest arm.linux.org.uk master list. + +* Patches by David Müller, 12 Jun 2003: + - rewrite of the S3C24X0 register definitions stuff + - "driver" for the built-in S3C24X0 RTC + +* Patches by Yuli Barcohen, 12 Jun 2003: + - Add MII support and Ethernet PHY initialization for MPC8260ADS board + - Fix incorrect SIUMCR initialisation caused by wrong Hard Reset + configuration word supplied by FPGA on some MPC8260ADS boards + +* Patch by Pantelis Antoniou, 10 Jun 2003: + Unify status LED interface + +* Add support for DS12887 RTC; add RTC support for ATC board + +* Patch by Nicolas Lacressonniere, 11 Jun 2003: + Modifications for Atmel AT91RM9200DK ARM920T based development kit + - Add Atmel DataFlash support for reading and writing. + - Add possibility to boot a Linux from DataFlash with BOOTM command. + - Add Flash detection on Atmel AT91RM9200DK + (between Atmel AT49BV1614 and AT49BV1614A flashes) + - Replace old Ethernet PHY layer functions + - Change link address + +* Patch by Frank Smith, 9 Jun 2003: + use CRIT_EXCEPTION for machine check on 4xx + +* Patch by Detlev Zundel, 13 Jun 2003: + added implementation of the "carinfo" command in cmd_immap.c + +* Fix CONFIG_NET_MULTI support in include/net.h + +* Patches by Kyle Harris, 13 Mar 2003: + - Add FAT partition support + - Add command support for FAT + - Add command support for MMC + ---- + - Add Intel PXA support for video + - Add Intel PXA support for MMC + ---- + - Enable MMC and FAT for lubbock board + - Other misc changes for lubbock board + +* Patch by Robert Schwebel, April 02, 2003: + fix for SMSC91111 driver + +* Patch by Vladimir Gurevich, 04 Jun 2003: + make ppc405 ethernet driver compatible with CONFIG_NET_MULTI option + +* Patch by Stefan Roese, 05 Jun 2003: + - PPC4xx: Fix bug for initial stack in data cache as pointed out by + Thomas Schaefer (tschaefer@giga-stream.de). Now inital stack in + data cache can be used even if the chip select is in use. + - CFG_RX_ETH_BUFFER added to set the ethernet receive buffer count + (see README for further description). + - Changed config files of CONFIG_EEPRO100 boards to use the + CFG_RX_ETH_BUFFER define. + +* Add support for RMU board + +* Add support for TQM862L at 100/50 MHz + +* Patch by Pantelis Antoniou, 02 Jun 2003: + major reconstruction of networking code; + add "ping" support (outgoing only!) + +* Patch by Denis Peter, 04 June 2003: + add support for the MIP405T board + +* Patches by Udi Finkelstein, 2 June 2003: + - Added support for custom keyboards, initialized by defining a + board-specific drv_keyboard_init as well as defining CONFIG_KEYBOARD . + - Added support for the RBC823 board. + - cpu/mpc8xx/lcd.c now automatically calculates the + Horizontal Pixel Count field. + +* Fix alignment problem in BOOTP (dhcp_leasetime option) + [pointed out by Nicolas Lacressonnière, 2 Jun 2003] + +* Patch by Mark Rakes, 14 May 2003: + add support for Intel e1000 gig cards. + +* Patch by Nye Liu, 3 Jun 2003: + fix critical typo in MAMR definition (include/mpc8xx.h) + +* Fix requirement to align U-Boot image on 16 kB boundaries on PPC. + +* Patch by Klaus Heydeck, 2 Jun 2003 + Minor changes for KUP4K configuration -commit 71748af833ca1017edf1415be376366ff2937d17 -Author: Haiying Wang <haiying.wang@freescale.com> -Date: Fri Jul 28 12:41:35 2006 -0400 +* Patch by Marc Singer, 29 May 2003: + Fixed rarp boot method for IA32 and other little-endian CPUs. - Correct the irq value of DUART2 +* Patch by Marc Singer, 28 May 2003: + Added port I/O commands. -commit 9cb3e8816ae4d854e7dc22128c3eea3d70bb982c -Author: Haiying Wang <haiying.wang@freescale.com> -Date: Fri Jul 28 12:41:41 2006 -0400 +* Patch by Matthew McClintock, 28 May 2003 + - cpu/mpc824x/start.S: fix relocation code when booting from RAM + - minor patches for utx8245 - Change the space size of PEX IO in README +* Patch by Daniel Engström, 28 May 2003: + x86 update -commit 239db37c94f7a92941c4465feceb867c609241c5 -Author: Haiying Wang <haiying.wang@freescale.com> -Date: Fri Jul 28 12:41:18 2006 -0400 +* Patch by Dave Ellis, 9 May 2003 + 27 May 2003: + add nand flash support to SXNI855T configuration + fix/extend nand flash support: + - fix 'nand erase' command so does not erase bad blocks + - fix 'nand write' command so does not write to bad blocks + - fix nand_probe() so handles no flash detected properly + - add doc/README.nand + - add .jffs2 and .oob options to nand read/write + - add 'nand bad' command to list bad blocks + - add 'clean' option to 'nand erase' to write JFFS2 clean markers + - make NAND read/write faster - Move get_board_sys_clk to board directory +* Patch by Rune Torgersen, 23 May 2003: + Update for MPC8266ADS board -commit 492900b985439fbce1a118afde1e35def870db03 -Author: John Traill <john.traill@freescale.com> -Date: Fri Jul 28 09:03:54 2006 +0100 +* Get (mostly) rid of CFG_MONITOR_LEN definition; compute real length + instead CFG_MONITOR_LEN is now only used to determine _at_compile_ + _time_ (!) if the environment is embedded within the U-Boot image, + or in a separate flash sector. - Fix 8641HPCN pollution +* Cleanup CFG_DER #defines in config files (wd maintained only) -commit 515ab8a62e8574e2babc6e8dcc43544ad221c5b2 -Author: John Traill <john.traill@freescale.com> -Date: Fri Jul 28 08:16:06 2006 +0100 +* Fix data abort exception handling for arm920t CPU - Fix 8641HPCN timebase +* Fix alignment problems with flash driver for TRAB board -commit c86360b830f1eecd7a72208575dde4f57879faea -Author: Zhang Wei <wei.zhang@freescale.com> -Date: Fri Jul 28 00:01:34 2006 +0800 +* Patch by Donald White, 21 May 2003: + fix calculation of base address in pci_hose_config_device() - Fixed OF device tree of mpc86xxhpcn board. +* Fix bug in command line parsing: "cmd1;cmd2" is supposed to always + execute "cmd2", even if "cmd1" fails. Note that this is different + to "run var1 var2" where the contents of "var2" will NOT be + executed when a command in "var1" fails. - The changes works in with kernel irq mapping rework. +* Add zero-copy ramdisk support (requires corresponding kernel support!) - Signed-off-by: Zhang Wei <wei.zhang@freescale.com> +* Patch by Kyle Harris, 20 May 2003: + In preparation for an ixp port, rename cpu/xscale and arch-xscale + into cpu/pxa and arch-pxa. -commit bea3f28d285942bf3f7ab339ce85178ded544225 -Author: Haiying Wang <haiying.wang@freescale.com> -Date: Wed Jul 12 10:48:05 2006 -0400 +* Patch by Stefan Roese, 23 May 2003: + - IBM PPC405EP port added. + - CONFIG_UART1_CONSOLE added. If defined internal UART1 (and not + UART0) is used as default U-Boot console. PPC4xx only! + - esd ASH405 board added (PPC405EP based). + - BUBINGA405EP board added (PPC405EP based - IBM Eval Board). + - esd CPCI405AB board added. + - esd PMC405 board added. + - Update of some esd boards. - Add support for reading and writing mac addresses to or from ID EEPROM. +* Patch by Denis Peter, 19 Mai 2003: + add support for the MIP405-3 board - Added code for reading and writing Mac addresses to/from ID EEPROM(0x57). - With attached patch, we can use command "mac/mac read/mac save/" - to read and write EEPROM under u-boot prompt. +* Patch by Dave Ellis, 22 May 2003: + Fix problem with only partially cleared .bss segment - U-boot will calculate the checksum of EEPROM while bootup, - if it is right, then u-boot will check whether the mac address - of eTSEC0/1/2/3 is availalbe (non-zero). +* Patch by Rune Torgersen, 12 May 2003: + get PCI to work on a MPC8266ADS board; incorporate change to + cpu/mpc8260/pci.c to enable overrides of PCI memory parameters - If there is mac address availabe in EEPROM, u-boot will use it, - otherewise, u-boot will use the mac address defined in - MPC8641HPCN.h. This matches the requirement to set unique mac address - for each TSEC port. +* Patch by Nye Liu, 1 May 2003: + minor patches for the FADS8xx - Signed-off-by: Haiying Wang <haiying.wang@freescale.com> - Signed-off-by: York Sun <yorksun@freescale.com> +* Patch by Thomas Schäfer, 28 Apr 2003: + Fix SPD handling for 256 ECC DIMM on Walnut -commit fcb28e763415e0e4e66b0f45842d1557ae198e5e -Author: Jin Zhengxiong <Jason.Jin@freescale.com> -Date: Thu Jul 13 10:35:10 2006 -0500 +* Add support for arbitrary bitmaps for TRAB's VFD command; + allow to pass boot bitmap addresses in environment variables; + allow for zero boot delay - Fixed initrd issue by define big RAM +* Patch by Christian Geißinger, 19 May 2002: + On TRAB: wait until the dummy byte has been completely sent - Signed-off-by:Jason Jin <Jason.jin@freescale.com> +* Patch by David Updegraff, 22 Apr 2003: + update for CrayL1 board -commit e6cd2a1785d74ec3d30a86f1cb360be8de478151 -Author: Jason Jin <Jason.jin@freescale.com> -Date: Fri Jul 7 10:01:45 2006 -0500 +* Patch by Pantelis Antoniou, 21 Apr 2003: + add boot support for ARTOS (a proprietary OS) - We made a u-boot patch to fix the hang up issue - when booting filesystem from ramdisk. +* Patch by Steven Scholz, 11 Apr 2003: + Add support for RTC DS1338 - Signed-off-by:Jason Jin <Jason.jin@freescale.com> +* Patch by Rod Boyce, 24 Jan 2003: + Fix counting of extended partitions in diskboot command -commit 38433ccc5850ee70549af0b2bc5b920355ef5388 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:47:03 2006 -0500 +* Patch by Christophe Lindheimer, 20 May 2003: + allow the use of CFG_LOADS when CFG_NO_FLASH is set - * Switched default PCI speed for 8540 ADS back to 33MHz - * Added comments and a printf to warn that PCI-X won't - work at 33MHz - Patch by Andy Fleming 17-Mar-2006 +* Fix SDRAM timing on Purple board - Signed-off-by: Andy Fleming <afleming@freescale.com> +* Add support for CompactFlash on ATC board + (includes support for Intel 82365 and compatible PC Card controllers, + and Yenta-compatible PCI-to-CardBus controllers) -commit e4c2a0eb0c3e3ffbf824800184ee42bdc99d5b19 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:46:35 2006 -0500 +* Patch by Mathijs Haarman, 08 May 2003: + Add lan91c96 driver (tested on Lubbock and custom PXA250 board only) - * Fixed a bug where 8555 PCI code used the old variable and - function names - Patch by Andy Fleming 17-Mar-2006 +* Fix problem with usage of "true" (undefined in current versions of bfd.h) - Signed-off-by: Andy Fleming <afleming@freescale.com> +* Add support for Promess ATC board -commit cbfc7ce756b88eb26e5537bc7b625c445c6dcfac -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:46:13 2006 -0500 +* Patch by Keith Outwater, 28 Apr 2003: + - Miscellaneous corrections and additions to GEN860T board specific code. + - Added GEN860_SC variant to GEN860T. + - Miscellaneous corrections to GEN860T documentation. + - Correct duplicate entry in U-Boot CREDITS file. + - Add GEN860T_SC entry in MAINTAINERS file. + - Update CREDITS file with GEN860T_SC info. - * Added VIA configuration table - * Added support for PCI2 on CDS - Patch by Andy Fleming 17-Mar-2006 +* Update Smiths Aerospace addresses in MAINTAINERS file - Signed-off-by: Andy Fleming <afleming@freescale.com> +* Fix error handling in hush's version of "run" command -commit 52c7a68b8d587ebcf5a6b051b58b3d3ffa377ddc -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:45:41 2006 -0500 +* LWMON extensions: + - Splashscreen support + - modem support + - sysmon support + - temperature dependend enabling of LCD - * Fixed PCI memory definitions - Patch by Andy Fleming 17-Mar-2006 +* Allow booting from old "PPCBoot" disk partitions - Signed-off-by: Andy Fleming <afleming@freescale.com> +* Add support for TQM8255 Board / MPC8255 CPU -commit 087454609e47295443af793a282cddcd91a5f49c -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:45:17 2006 -0500 +====================================================================== +Changes for U-Boot 0.3.1: +====================================================================== - * Added support for initializing second PCI bus on 85xx - Patch by Andy Fleming 17-Mar-2006 +* Make sure Block Lock Bits get cleared in R360MPI flash driver - Signed-off-by: Andy Fleming <afleming@freescale.com> +* MPC823 LCD driver: Fill color map backwards, to allow for steady + display when Linux takes over -commit b636aaeb6fd516a442fb611bbeeddf3077a687fb -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:44:49 2006 -0500 +* Patch by Erwin Rol, 27 Feb 2003: + Add support for RTEMS (this time for real). - * Added PCI-X #defines for PCI-X initialization - Patch by Andy Fleming on 17-Mar-2006 +* Add support for "bmp info" and "bmp display" commands to load + bitmap images; this can be used (for example in a "preboot" + command) to display a splash screen very quickly after poweron. - Signed-off-by: Andy Fleming <afleming@freescale.com> +* Add support for 133 MHz clock on INCA-IP board -commit 20abbc6fffa115690107cc942c7abf84bdc03a1b -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:44:23 2006 -0500 +* Patch by Lutz Dennig, 10 Apr 2003: + Update for R360MPI board - * Made sure the code which disables prefetch for PCI devices - sets the size of the prefetch region to 0 - Patch by Andy Fleming on 17-Mar-2006 +* Add new meaning to "autostart" environment variable: + If set to "no", a standalone image passed to the + "bootm" command will be copied to the load address + (and eventually uncompressed), but NOT be started. + This can be used to load and uncompress arbitrary + data. - Signed-off-by: Andy Fleming <afleming@freescale.com> +* Patch by Stefan Roese, 10 Apr 2003: + Changed DHCP client to use IP address from server option field #54 + from the OFFER packet in the server option field #54 in the REQUEST + packet. This fixes a problem using a Windows 2000 DHCP server, + where the DHCP-server is not the TFTP-server. -commit 40d5fa35d02df22580593bf0039ab173367e8ef0 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:43:36 2006 -0500 +* Set max brightness for MN11236 displays on TRAB board - * Add Flat Dev Tree construction for MPC85xx ADS and CDS boards - Patch by Jon Loeliger 17-Jan-2006 +* Add support for TQM862L modules - Signed-off-by: Jon Loeliger <jdl@freescale.com> +====================================================================== +Changes for U-Boot 0.3.0: +====================================================================== -commit be7e8b0cb5a0c49dc180075b96df296a893bf146 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:43:00 2006 -0500 +* Patch by Arun Dharankar, 4 Apr 2003: + Add IDMA example code (tested on 8260 only) - * Removed the oftree.dts for stxxtx in light of the changes - to the flat device tree handling code - Patch by Matthew McClintock 26-June-2006 +* Add support for Purple Board (MIPS64 5Kc) -commit 1b380ec225665e73959677f3893dc658c5925e05 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:42:24 2006 -0500 +* Add support for MIPS64 5Kc CPUs - * Patch to modify ft_build.c to update flat device trees in place - Patch by Matthew McClintock 26-June-2006 +* Fix missing setting of "loadaddr" and "bootfile" on ARM and MIPS -commit 98a9c4d468a942a09ebe8979bec508017f3e4462 -Author: Matthew McClintock <msm@freescale.com> -Date: Wed Jun 28 10:41:37 2006 -0500 +* Patch by Denis Peter, 04 Apr 2003: + - update MIP405-4 board - * Modify bootm command to support booting with flat device trees - Patch by Matthew McClintock 26-June-2006 +* Patch by Stefan Roese, 4 Apr 2003: + - U-Boot version environment variable "ver" added + (CONFIG_VERSION_VARIABLE). + - Changed PPC405GPr version from A to B. + - Changed CPCI405 to use CTS instead of DSR on PPC405 UART1. -commit da012ab661fd4ab169dd7b9b32201a4df62cf34a -Author: Jin Zhengxiong <Jason.Jin@freescale.com> -Date: Wed Jun 28 08:43:56 2006 -0500 +* Patches by Denis Peter, 03 April 2003: + - fix PCI IRQs on MPL boards + - fix two more un-relocated pointer problems - Change Id to symbolic name for RTL8139 +* Fix behaviour of "run" command: + - print error message iv variable does not exist + - terminate processing of arguments in case of error - Signed-off-by: Jason Jin <Jason.jin@freescale.com> +* Patches by Peter Figuli, 10 Mar 2003 + - Add support for BTUART on PXA platform + - Add support for WEP EP250 (PXA) board -commit bc09cf3c2bfb8d54c659cbb332f79d0950982fd0 -Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> -Date: Tue Jun 27 18:12:10 2006 +0800 +* Fix flash problems on INCA-IP; add tool to allow bruning images to + flash using a BDI2000 - Fix RTL8139 in big endian +* Implement fix for I2C Edge Conditions problem for all boards that + use the bit-banging driver (common/soft_i2c.c) - signed-off-by: Jason Jin <Jason.Jin@freescale.com> - signed-off-by: Wei Zhang <wei.zhang@freescale.com> +* Patch by Martin Winistoerfer, 23 Mar 2003 + - Add port to MPC555/556 microcontrollers + - Add support for cmi customer board with + Intel 28F128J3A, 28F320J3A or 28F640J3A flash. -commit fcfb9a57947fc203b99fe81ab0578f7286261f9f -Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> -Date: Tue Jun 27 18:12:23 2006 +0800 +* Patch by Rick Bronson, 28 Mar 2003: + - fix common/cmd_nand.c - Fix Tsec bug when no link +* Patch by Arun Dharankar, 24 Mar 2003: + - add threads / scheduler example code - When tftp a non-exist file from the tftp server, u-boot will check - the link of all eth port. The original file will return wrong link - state on the no link ports. +* Add patches by Robert Schwebel, 31 Mar 2003: + - add ctrl-c support for kermit download + - align bdinfo output on ARM + - csb226 board: bring in sync with innokom/memsetup.S + - csb226 board: fix MDREFR handling + - misc doc fixes / extensions + - innokom board: cleanup, MDREFR fix in memsetup.S, config update + - add BOOT_PROGRESS to armlinux.c - signed-off-by: Jason Jin <Jason.Jin@freescale.com> +* Add CPU ID, version, and clock speed for INCA-IP -commit bd22c2b97514fbfb0e03bd9c72b3445e4dbd57e2 -Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> -Date: Tue Jun 27 18:12:02 2006 +0800 +* Patches by Dave Ellis, 18 Mar 2003 for SXNI855T board: + - fix SRAM and SDRAM memory sizing + - add status LED support + - add MAC address for second (SCC1) ethernet port - Fix bug for io_bar size during pci scan +* Update default environment for TQM8260 board + +* Patch by Rick Bronson, 16 Mar 2003: + - Add NAND flash support for reading, writing, and erasing NAND + flash (certain forms of which are called SmartMedia). + - Add support for Atmel AT91RM9200DK ARM920T based development kit. + +* Patches by Robert Schwebel, 19 Mar 2003: + - use arm-linux-gcc as default compiler for ARM + - fix i2c fixup code + - fix missing baudrate setting + - added $loadaddr / CFG_LOAD_ADDR support to loadb + - moved "ignoring trailing characters" _before_ u-boot wants to + print out diagnostics messages; removes bogus characters at the + end of transmission + +* Patch by John Zhan, 18 Mar 2003: + Add support for SinoVee Microsystems SC8xx boards + +* Patch by Rolf Offermanns, 21 Mar 2003: + ported the dnp1110 related changes from the current armboot cvs to + current u-boot cvs. smc91111 does not work. problem marked in + smc91111.c, grep for "FIXME". + +* Patch by Brian Auld, 25 Mar 2003: + Add support for STM flash chips on ebony board + +* Add PCI support for MPC8250 Boards (PM825 module) + +* Patch by Stefan Roese, 25 Mar 2003: + - PCI405 update. + +* Patch by Stefan Roese, 20 Mar 2003: + - CPCI4052 update (support for revision 3). + - Set edge conditioning circuitry on PPC405GPr for compatibility + to existing PPC405GP designs. + - Clip udiv to 5 bits on PPC405 (serial.c). + +* Extend INCAIP board support: + - add automatic RAM size detection + - add "bdinfo" command + - pass flash address and size to Linux kernel + - switch to 150 MHz clock + +* Avoid flicker on the TRAB's VFD by synchronizing the enable with + the HSYNC/VSYNC. Requires new CPLD code (Version 101 for Rev. 100 + boards, version 153 for Rev. 200 boards). + +* Patch by Vladimir Gurevich, 12 Mar 2003: + Fix relocation problem of statically initialized string pointers + in common/cmd_pci.c + +* Patch by Kai-Uwe Blöm, 12 Mar 2003: + Cleanup & bug fixes for JFFS2 code: + - the memory mangement was broken. It caused havoc on malloc by + writing beyond the block boundaries. + - the length calculation for files was wrong, sometimes resulting + in short file reads. + - data copying now optionally takes fragment version numbers into + account, to avoid copying from older data. + See doc/README.JFFS2 for details. + +* Patch by Josef Wagner, 12 Mar 2003: + - 16/32 MB and 50/80 MHz support with auto-detection for IP860 + - ETH05 and BEDBUG support for CU824 + - added support for MicroSys CPC45 + - new BOOTROM/FLASH0 and DOC base for PM826 + +* Patch by Robert Schwebel, 12 Mar 2003: + Fix the chpart command on innokom board + +* Name cleanup: + mv include/asm-i386/ppcboot-i386.h include/asm-i386/u-boot-i386.h + s/PPCBoot/U-Boot/ in some files + s/pImage/uImage/ in some files + +* Patch by Detlev Zundel, 15 Jan 2003: + Fix '' command line quoting + +* Patch by The LEOX team, 19 Jan 2003: + - add support for the ELPT860 board + - add support for Dallas ds164x RTC + +* Patches by David Müller, 31 Jan 2003: + - minimal setup for CardBus bridges + - add EEPROM read/write support in the CS8900 driver + - add support for the builtin I2C controller in the Samsung s3c24x0 chips + - add support for MPL's VCMA9 (Samsung s3c2410 based) board + +* Patch by Steven Scholz, 04 Feb 2003: + add support for RTC DS1307 - During the pci scan process, Some devices return bar_reponse with the - highest bytes 0, such as the pci bridge in uli1575 return bar_response - with 0xffffff, So the bar_size should be manually set under 64K. +* Patch by Reinhard Meyer, 5 Feb 2003: + fix PLPRCR/SCCR init sequence on 8xx to allow for + changes of EBDF by software + +* Patch by Vladimir Gurevich, 07 Feb 2003: + "API-compatibility patch" for 4xx I2C driver - Signed-off-by: Jason Jin <jason.jin@freescale.com> +* TRAB fixes / extensions: + - Restore VFD brightness as saved in environment + - add support for Fujitsu flashes + - make sure both buzzers are turned off (drive low level) -commit fa7db9c377bc2353a17bf1d381d65a6c418728f0 -Author: Jin Zhengxiong-R64188 <Jason.Jin@freescale.com> -Date: Tue Jun 27 18:11:54 2006 +0800 +* Patches by Robert Schwebel, 06 Mar 2003: + - fix bug in BOOTP code (must use NetCopyIP) + - update of CSB226 port + - clear BSS segment on XScale + - added support for i2c_init_board() function + - update to the Innokom plattform - Enable PCIE1 for MPC8641HPCN board +* Extend support for redundand environments for configurations where + environment size < sector size - Signed-off-by: Jason Jin <Jason.jin@freescale.com> +* Patch by Rune Torgersen, 13 Feb 2003: + Add support for Motorola MPC8266ADS board -commit 684623ce92c5fd32e7db2d6e016945a67c5ffaba -Author: Jon Loeliger <jdl@freescale.com> -Date: Thu Jun 22 08:51:46 2006 -0500 +* Patch by Kyle Harris, 19 Feb 2003: + patches for the Intel lubbock board: + memsetup.S - general cleanup (based on Robert's csb226 code) + flash.c - overhaul, actually works now + lubbock.c - fix init funcs to return proper value - Fix bug in 8641hpcn reset command with no args. +* Patch by Kenneth Johansson, 26 Feb 2003: + - Fixed off by one in RFTA calculation. + - No need to abort when LDF is lower than we can program it's only + minimum timing so clamp it to what we can do. + - Takes function pointer to function for reading the spd_nvram. Usefull + for faking data or hardcode a module without the nvram. + - fix other user for above change + - fix some comments. - Signed-off-by: Haiying Wang <haiying.wang@freescale.com> - Acked-by: Jon Loeliger <jdl@freescale.com> +* Patches by Brian Waite, 26 Feb 2003: + - fix port for evb64260 board + - fix PCI for evb64260 board + - fix PCI scan -commit 8be429a5ddbf0ebe2d94174ba58fcfc7a24285dc -Author: Zhang Wei <wei.zhang@freescale.com> -Date: Tue Jun 20 17:47:15 2006 +0800 +* Patch by Reinhard Meyer, 1 Mar 2003: + Add support for EMK TOP860 Module - Reworked IRQ mapping in OF-tree. +* Patch by Yuli Barcohen, 02 Mar 2003: + Add SPD EEPROM support for MPC8260ADS board -commit 0e4c2a17ca34001ed36d259f13cb88ada4611a8c -Author: Jon Loeliger <jdl@freescale.com> -Date: Thu Jun 15 21:33:37 2006 -0500 +* Patch by Robert Schwebel, 21 Jan 2003: + - Add support for Innokom board + - Don't complain if "install" fails + - README cleanup (remove duplicated lines) + - Update PXA header files - Do not enable address translation on secondary CPUs. - Do not set up BATs on secondary CPUs. Let Linux do the nasty. +* Add documentation for existing POST code (doc/README.POST) - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Patch by Laudney Ren, 15 Jan 2003: + Fix handling of redundand environment in "tools/envcrc.c" -commit 8ecc971618f56029ad99d3516f8b297a6ed58971 -Author: Jon Loeliger <jdl@jdl.com> -Date: Wed Jun 7 10:53:55 2006 -0500 +* Patch by Detlev Zundel, 28 Feb 2003: + Add bedbug support for 824x systems - Fix a get_board_sys_clk() use-before-def warning. +* Add support for 16 MB flash configuration of TRAB board - Signed-off-by: Jon Loeliger <jdl@jdl.com> +* Patch by Erwin Rol, 27 Feb 2003: + Add support for RTEMS -commit d9bf4858fca5aa4d651b283270f77da72ebadfd5 -Author: Jon Loeliger <jdl@jdl.com> -Date: Wed Jun 7 10:52:49 2006 -0500 +* Add image information to README - Allow DTC path to be passed in. +* Patch by Stefan Roese, 18 Feb 2003: + CPCIISER4 configuration updated. - Signed-off-by: Jon Loeliger <jdl@jdl.com> +* Patch by Stefan Roese, 17 Feb 2003: + Fixed bug in ext. serial clock setup on PPC405 (since PPC440 port). -commit c83ae9ea6d93abbe751bf8a3396236a084e56f87 -Author: Haiying Wang <haiying.wang@freescale.com> -Date: Tue Jun 6 16:54:29 2006 -0400 +* Patch by Stefan Roese, 13 Feb 2003: + Add "pcidelay" environment variable (in ms, enabled via + CONFIG_PCI_BOOTDELAY). + PCI spec 2.2 defines, that a pci target has 2^25 pci clocks after + RST# to respond to configuration cycles (33MHz -> 1s). - Modify the IRQ of DUART2 +* Fix dual PCMCIA slot support (when running with just one + slot populated) -commit c934f655f9aeca70a5c5f88b465d9e9d57a8d22e -Author: Jon Loeliger <jdl@jdl.com> -Date: Wed May 31 13:55:35 2006 -0500 +* Add VFD type detection to trab board - Review cleanups. +* extend drivers/cs8900.c driver to synchronize ethaddr environment + variable with value in the EEPROM - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Patch by Stefan Roese, 10 Feb 2003: + Add support for 4MB and 128MB onboard SDRAM (cpu/ppc4xx/sdram.c) -commit cb5965fb95b77a49f4e6af95248e0c849f4af03e -Author: Jon Loeliger <jdl@jdl.com> -Date: Wed May 31 12:44:44 2006 -0500 +* Add support for MIPS32 4Kc CPUs - White space cleanup. - Some 80-column cleanups. - Convert printf() to puts() where possible. - Use #include "spd_sdram.h" as needed. - Enhanced reset command usage message a bit. +* Add support for INCA-IP Board - Signed-off-by: Jon Loeliger <jdl@freescale.com> +====================================================================== +Changes for U-Boot 0.2.2: +====================================================================== -commit 3d5c5be547445dd3bd2eb7368d80df03ea437970 -Author: Jon Loeliger <jdl@jdl.com> -Date: Wed May 31 11:39:34 2006 -0500 +* Add dual ethernet support on PM826 - Removed unneeded local_bus_init() from 8641HPCN board. +* Add support for LXT971 PHY on PM826 - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Patch by Tord Andersson, 16 Jan 2003: + Fix flash sector count for TQM8xxL -commit 4d3d729c16c392d2982d3266b659d333c927697d -Author: Jon Loeliger <jdl@jdl.com> -Date: Wed May 31 11:24:28 2006 -0500 +* Fix I2C EEPROM problem on ICU862 board (would only write the first + 16 bytes out of each 32 byte block) - Moved mpc8641hpcn_board_reset() out of cpu/ into board/. +====================================================================== +Changes for U-Boot 0.2.1: +====================================================================== - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Add support for V37 board + (patch by Jón Benediktsson, 11 Dec 2002) -commit b2a941de060350ad15878d8219825f4950e9bb8e -Author: Jon Loeliger <jdl@jdl.com> -Date: Wed May 31 10:07:28 2006 -0500 +* Update baudrate in bd_info when it gets changed - Remove dead debug code. +* Add watchdog trigger points while waiting for serial port + (so far only 8xx -- needed on LWMON with 100ms watchdog) - Signed-off-by: Jon Loeliger <jdl@jdl.com> +* Improve command line tool to access the U-Boot's environment + (figuration of the utility, using a config file) -commit 126aa70f10ba3d20e0a6f4d32328250513b77770 -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue May 30 17:47:00 2006 -0500 +* Add single quote support for (old) command line parser - Move mpc86xx PIXIS code to board directory +* Switch LWMON board default config from FRAM to EEPROM; + in POST, EEPROM shows up on 8 addresses - First cut at moving the PIXIS platform code out of - the 86xx cpu directory and into board/mpc8641hpcn - where it belongs. +====================================================================== +Changes for U-Boot 0.2.0: +====================================================================== - Signed-off-by: Jon Loeliger <jdl@freescale.com> +* Use 1-byte-read instead of -write for iprobe() function + Add i2c commands to PM826 config -commit 38cee12dcfcc257371c901c7e13e58ecab0a35d8 -Author: Haiying Wang <Haiying.Wang@freescale.com> -Date: Tue May 30 09:10:32 2006 -0500 +* extend I2C POST code: check for list on known addresses - Improve "reset" command's interaction with watchdog. +* Improve log buffer code; use "loglevel" to decide which messages + to log on the console, too (like in Linux); get rid of "logstart" - "reset altbank" will reset another bank WITHOUT watch dog timer enabled - "reset altbank wd" will reset another bank WITH watch dog enabled - "diswd" will disable watch dog after u-boot boots up successfully +* Add command line tool to access the U-Boot's environment + (board-specific for TRAB now, to be fixed later) - Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> +* Patch by Hans-Joerg Frieden, 06 Dec 2002 + Fix misc problems with AmigaOne support -commit 70205e5a6ddc8528b11db9eb4d3fa0209d9fce2a -Author: Haiying Wang <Haiying.Wang@freescale.com> -Date: Tue May 30 08:51:19 2006 -0500 +* Patch by Chris Hallinan, 3 Dec 2002: + minor cleanup to the MPC8245 EPIC driver - Fix two SDRAM setup bugs. +* Patch by Pierre Aubert , 28 Nov 2002 + Add support for external (SIU) interrupts on MPC8xx - Fix ECC setup bug. - Enable 1T/2T based on number of DIMMs present. +* Patch by Pierre Aubert , 28 Nov 2002 + Fix nested syscalls bug in standalone applications - Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> +* Patch by David Müller, 27 Nov 2002: + fix output of "pciinfo" command for CardBus bridge devices. -commit d11fec5015334deb2010e36ce00bb118cc5429a5 -Author: Haiying Wang <Haiying.Wang@freescale.com> -Date: Fri May 26 10:24:48 2006 -0500 +* Fix bug in TQM8260 board detection - boards got stuck when board ID + was not readable - Add first draft of the MPC8641HPCN doc/README. +* Add LED indication for IDE activity on KUP4K board - Signed-off-by: Jon Loeliger <jdl@jdl.com> +* Fix startup problems with VFD display on TRAB -commit ed45d6c930b5939718a87ee12e25cf9a05978d4a -Author: Haiying Wang <Haiying.Wang@freescale.com> -Date: Fri May 26 10:13:04 2006 -0500 +* Patch by Pierre Aubert, 20 Nov 2002 + Add driver for Epson SED13806 graphic controller. + Add support for BMP logos in cfb_console driver. - Added pci@8000 block. - Updated ethernet interrupt mappings (moved up 48). - Cleaned up a few comments. +* Added support for both PCMCIA slots (at the same time!) on MPC8xx - Signed-off-by: Jon Loeliger <jdl@jdl.com> +* Patch by Rod Boyce, 21 Nov 2002: + fix PCMCIA on MBX8xx board -commit 3033ebb20fd7c372c7bca3c9955a4692bb2240b7 -Author: Haiying Wang <Haiying.Wang@freescale.com> -Date: Fri May 26 10:01:16 2006 -0500 +* Patch by Pierre Aubert , 21 Nov 2002 + Add CFG_CPM_POST_WORD_ADDR to make the offset of the + bootmode word in DPRAM configurable - Allow args on reset command. +* Patch by Daniel Engström, 18 Nov 2002: + Fixes for x86 port (mostly strings issues) - Signed-off-by: Jon Loeliger <jdl@jdl.com> +* Patch by Ken Chou, 18 Nov 2002: + Fix for natsemi NIC cards (DP83815) -commit 14e37081ff3cac7ebe6e93836523429853b6b292 -Author: Jon Loeliger <jdl@jdl.com> -Date: Fri May 19 13:28:39 2006 -0500 +* Patch by Pierre Aubert, 19 Nov 2002: + fix a bug for the MII configuration, and some warnings - Change arbitration to round-robin for SMP linux. +* Patch by Thomas Frieden, 13 Nov 2002: + Add code for AmigaOne board + (preliminary merge to U-Boot, still WIP) -commit 9a655876e5995be80f49054e2509500e871e4d3a -Author: Jon Loeliger <jdl@jdl.com> -Date: Fri May 19 13:26:34 2006 -0500 +* Patch by Jon Diekema, 12 Nov 2002: + - Adding URL for IEEE OUI lookup + - Making the autoboot #defines dependent on CONFIG_AUTOBOOT_KEYED + being defined. + - In the CONFIG_EXTRA_ENV_SETTINGS #define, the root-on-initrd and + root-on-nfs macros are designed to switch how the default boot + method gets defined. - Enable dual DDR controllers and interleaving. +* Patch by Daniel Engström, 13 Nov 2002: + Add support for i386 architecture and AMD SC520 board -commit 586d1d5abd3e525f1e1d9b81e5a61a4da6b2fa3c -Author: Jon Loeliger <jdl@jdl.com> -Date: Fri May 19 13:22:44 2006 -0500 +* Patch by Pierre Aubert, 12 Nov 2002: + Add support for DOS filesystem and booting from DOS floppy disk - Update 86xx address map and LAWBARs. +* Patch by Jim Sandoz, 07 Nov 2002: + Increase number of network RX buffers (PKTBUFSRX in + "include/net.h") for EEPRO100 based boards (especially SP8240) + which showed "Receiver is not ready" errors when U-Boot was + processing the receive buffers slower than the network controller + was filling them. -commit cccce5d0581bb0ba4602799a4b5112e58d1579cb -Author: Jon Loeliger <jdl@jdl.com> -Date: Fri May 19 13:14:15 2006 -0500 +* Patch by Andreas Oberritter, 09 Nov 2002: + Change behaviour of NetLoop(): return -1 for errors, filesize + otherwise; return code 0 is valid an means no file loaded - in this + case the environment still gets updated! - Remove L2 Cache invalidate polling. +* Patches by Jon Diekema, 9 Nov 2002: + - improve ADC/DAC clocking on the SACSng board to align + the failing edges of LRCLK and SCLK + - sbc8260 configuration tweaks + - add status LED support for 82xx systems + - wire sspi/sspo commands into command handler; improved error + handlering + - add timestamp support and alternate memory test to the + SACSng configuration -commit f35ec68fb066cec0e36294bfe07dec2d4e8ad3a8 -Author: Jon Loeliger <jdl@jdl.com> -Date: Fri May 19 12:33:09 2006 -0500 +* Patch by Vince Husovsky, 7 Nov 2002: + Add "-n" to linker options to get rid of "Not enough room for + program headers" problem - Enable 2nd CPU and I2C. +* Patch by David Müller, 05 Nov 2002 + Rename CONFIG_PLL_INPUT_FREQ to CONFIG_SYS_CLK_FREQ + so we can use an already existing name -commit bf690dcb512d34c4fceec0eb1e5c0e88a9db5d54 -Author: Jon Loeliger <jdl@freescale.com> -Date: Mon May 15 07:26:56 2006 -0500 +* Patch by Pierre Aubert, 05 Nov 2002 + Hardware relatied improvments in FDC boot code - Update interrupt mapping. +* Patch by Holger Schurig, 5 Nov 2002: + Make the PXA really change it's frequency -commit 6cfea33477b04b63ed47386ed1629529484c33ba -Author: Haiying Wang <Haiying.Wang@freescale.com> -Date: Wed May 10 09:38:06 2006 -0500 +* Patch by Pierre Aubert, 05 Nov 2002 + Add support for slave serial Spartan 2 FPGAs - Remove unneeded INIT_RAM_LOCK cache twiddling. - Correctly tracks r29 as global data pointer now. +* Fix uninitialized memory (MAC address) in 8xx SCC/FEC ethernet + drivers - Signed-off-by: Haiying Wang <Haiying.Wang@freescale.com> +* Add support for log buffer which can be passed to Linux kernel's + syslog mechanism; used especially for POST results. -commit d4dd317b58c126a2a7e73f4764ecc1a7c97f876c -Author: Jon Loeliger <jdl@freescale.com> -Date: Wed May 10 09:33:07 2006 -0500 +* Patch by Klaus Heydeck, 31 Oct 2002: + Add initial support for kup4k board - Remove unnecessary flash.c file. +* Patch by Robert Schwebel, 04 Nov 2002: + - use watchdog to reset PXA250 systems + - added progress callbacks to (some of the) ARM code + - update for Cogent CSB226 board -commit 18b6c8cd8af6cc7f35180cedc4adb3236cc1a1b8 -Author: Jon Loeliger <jdl@freescale.com> -Date: Tue May 9 08:23:49 2006 -0500 +* Add support for FPS860 board - Get MPC8641HPCN flash images working. +* Patch by Guillaume Alexandre,, 04 Nov 2002: + Improve PCI access on 32-bits Compact PCI bus - Enable the CFI driver. - Remove bogus LAWBAR7 cruft. - Use correct TEXT_BASE, Fixup load script. - Enable SPD EEPROM during DDR setup. - Use generic RFC 1918 IP addresses by default. +* Fix mdelay() on TRAB - this was still the debugging version with + seconds instead of ms. -commit 5c9efb36a6b5431423f52888a0e3b4b515fe7eca -Author: Jon Loeliger <jdl@freescale.com> -Date: Thu Apr 27 10:15:16 2006 -0500 +* Patch by Robert Schwebel, 1 Nov 2002: + XScale related cleanup (affects all ARM boards) - Cleanup whitespaces and style issues. - Removed //-style comments. - Use 80-column lines. - Remove trailing whitespace. - Remove dead code and debug cruft. +* Cleanup of names and README. -commit a2320a6bf8113a09544c42d160d10ac69d049a03 -Author: Jon Loeliger <jdl@freescale.com> -Date: Thu Apr 27 08:22:39 2006 -0500 +====================================================================== +Notes for U-Boot 0.1.0: +====================================================================== - Revert bad PCI prefetch limit change. +This is the initial version of "Das U-Boot", the Universal Boot Loader. -commit debb7354d1ea4f694154818df5e5b523f5c1cc1d -Author: Jon Loeliger <jdl@freescale.com> -Date: Wed Apr 26 17:58:56 2006 -0500 +It is based on version 2.0.0 (the "Halloween Release") of PPCBoot. +For information about the history of the project please see the +PPCBoot project page at http://sourceforge.net/projects/ppcboot - Initial support for MPC8641 HPCN board. +====================================================================== diff --git a/MAINTAINERS b/MAINTAINERS index 8bb38b5..d453967 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -281,6 +281,7 @@ Stefan Roese <sr@denx.de> TQM85xx MPC8540/8541/8555/8560 + alpr PPC440GX bamboo PPC440EP bunbinga PPC405EP ebony PPC440GP @@ -74,21 +74,21 @@ LIST_8xx=" \ ######################################################################### LIST_4xx=" \ - ADCIOP AP1000 AR405 ASH405 \ - bamboo bubinga CANBT CMS700 \ - CPCI2DP CPCI405 CPCI4052 CPCI405AB \ - CPCI405DT CPCI440 CPCIISER4 CRAYL1 \ - csb272 csb472 DASA_SIM DP405 \ - DU405 ebony ERIC EXBITGEN \ - G2000 HH405 HUB405 JSE \ - KAREF luan METROBOX MIP405 \ - MIP405T ML2 ml300 ocotea \ - OCRTC ORSG p3p440 PCI405 \ - pcs440ep PIP405 PLU405 PMC405 \ - PPChameleonEVB sbc405 sequoia sequoia_nand \ - VOH405 VOM405 W7OLMC W7OLMG \ - walnut WUH405 XPEDITE1K yellowstone \ - yosemite yucca bamboo \ + ADCIOP alpr AP1000 AR405 \ + ASH405 bamboo bubinga CANBT \ + CMS700 CPCI2DP CPCI405 CPCI4052 \ + CPCI405AB CPCI405DT CPCI440 CPCIISER4 \ + CRAYL1 csb272 csb472 DASA_SIM \ + DP405 DU405 ebony ERIC \ + EXBITGEN G2000 HH405 HUB405 \ + JSE KAREF luan METROBOX \ + MIP405 MIP405T ML2 ml300 \ + ocotea OCRTC ORSG p3p440 \ + PCI405 pcs440ep PIP405 PLU405 \ + PMC405 PPChameleonEVB sbc405 sequoia \ + sequoia_nand VOH405 VOM405 W7OLMC \ + W7OLMG walnut WUH405 XPEDITE1K \ + yellowstone yosemite yucca \ " ######################################################################### @@ -984,6 +984,9 @@ xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$( ADCIOP_config: unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx adciop esd +alpr_config: unconfig + @./mkconfig $(@:_config=) ppc ppc4xx alpr prodrive + AP1000_config:unconfig @$(MKCONFIG) $(@:_config=) ppc ppc4xx ap1000 amirix diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c index 92dc9d4..754ae44 100644 --- a/board/amcc/yellowstone/yellowstone.c +++ b/board/amcc/yellowstone/yellowstone.c @@ -552,3 +552,9 @@ void hw_watchdog_reset(void) } #endif + +void board_reset(void) +{ + /* give reset to BCSR */ + *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09; +} diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 7f2e718..588ee90 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -548,3 +548,9 @@ void hw_watchdog_reset(void) } #endif + +void board_reset(void) +{ + /* give reset to BCSR */ + *(unsigned char *)(CFG_BCSR_BASE | 0x06) = 0x09; +} diff --git a/board/prodrive/alpr/Makefile b/board/prodrive/alpr/Makefile new file mode 100644 index 0000000..1024a41 --- /dev/null +++ b/board/prodrive/alpr/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o flash.o fpga.o nand.o +SOBJS = init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend *~ + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c new file mode 100644 index 0000000..e8435bf --- /dev/null +++ b/board/prodrive/alpr/alpr.c @@ -0,0 +1,284 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <common.h> +#include <asm/processor.h> +#include <spd_sdram.h> +#include <ppc4xx_enet.h> + +DECLARE_GLOBAL_DATA_PTR; + +extern int alpr_fpga_init(void); + +int board_early_init_f (void) +{ + unsigned long mfr; + + /*-------------------------------------------------------------------------+ + | Initialize EBC CONFIG + +-------------------------------------------------------------------------*/ +#if 0 + mtebc(xbcfg, EBC_CFG_LE_UNLOCK | + EBC_CFG_PTD_ENABLE | EBC_CFG_RTC_64PERCLK | + EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | + EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | + EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); +#else + mtebc(xbcfg, EBC_CFG_LE_UNLOCK | + EBC_CFG_PTD_DISABLE | EBC_CFG_RTC_64PERCLK | + EBC_CFG_ATC_PREVIOUS | EBC_CFG_DTC_PREVIOUS | + EBC_CFG_CTC_PREVIOUS | EBC_CFG_EMC_NONDEFAULT | + EBC_CFG_PME_DISABLE | EBC_CFG_PR_32); +#endif + + /*-------------------------------------------------------------------- + * Setup the interrupt controller polarities, triggers, etc. + *-------------------------------------------------------------------*/ + mtdcr (uic0sr, 0xffffffff); /* clear all */ + mtdcr (uic0er, 0x00000000); /* disable all */ + mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */ + mtdcr (uic0pr, 0xfffffe13); /* per ref-board manual */ + mtdcr (uic0tr, 0x01c00008); /* per ref-board manual */ + mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic0sr, 0xffffffff); /* clear all */ + + mtdcr (uic1sr, 0xffffffff); /* clear all */ + mtdcr (uic1er, 0x00000000); /* disable all */ + mtdcr (uic1cr, 0x00000000); /* all non-critical */ + mtdcr (uic1pr, 0xffffe0ff); /* per ref-board manual */ + mtdcr (uic1tr, 0x00ffc000); /* per ref-board manual */ + mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic1sr, 0xffffffff); /* clear all */ + + mtdcr (uic2sr, 0xffffffff); /* clear all */ + mtdcr (uic2er, 0x00000000); /* disable all */ + mtdcr (uic2cr, 0x00000000); /* all non-critical */ + mtdcr (uic2pr, 0xffffffff); /* per ref-board manual */ + mtdcr (uic2tr, 0x00ff8c0f); /* per ref-board manual */ + mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic2sr, 0xffffffff); /* clear all */ + + mtdcr (uicb0sr, 0xfc000000); /* clear all */ + mtdcr (uicb0er, 0x00000000); /* disable all */ + mtdcr (uicb0cr, 0x00000000); /* all non-critical */ + mtdcr (uicb0pr, 0xfc000000); /* */ + mtdcr (uicb0tr, 0x00000000); /* */ + mtdcr (uicb0vr, 0x00000001); /* */ + mfsdr (sdr_mfr, mfr); + mfr &= ~SDR0_MFR_ECS_MASK; + + return 0; +} + +int checkboard (void) +{ + char *s = getenv ("serial#"); + + printf ("Board: ALPR"); + if (s != NULL) { + puts (", serial# "); + puts (s); + } + putc ('\n'); + + return (0); +} + +#if defined(CFG_DRAM_TEST) +int testdram (void) +{ + uint *pstart = (uint *) 0x00000000; + uint *pend = (uint *) 0x08000000; + uint *p; + + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + return 0; +} +#endif + +/************************************************************************* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +int pci_pre_init(struct pci_controller * hose ) +{ + unsigned long strap; + + /*--------------------------------------------------------------------------+ + * The ocotea board is always configured as the host & requires the + * PCI arbiter to be enabled. + *--------------------------------------------------------------------------*/ + mfsdr(sdr_sdstp1, strap); + if( (strap & SDR0_SDSTP1_PAE_MASK) == 0 ){ + printf("PCI: SDR0_STRP1[%08lX] - PCI Arbiter disabled.\n",strap); + return 0; + } + + /* FPGA Init */ + alpr_fpga_init (); + + return 1; +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ + +/************************************************************************* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller * hose ) +{ + /*--------------------------------------------------------------------------+ + * Disable everything + *--------------------------------------------------------------------------*/ + out32r( PCIX0_PIM0SA, 0 ); /* disable */ + out32r( PCIX0_PIM1SA, 0 ); /* disable */ + out32r( PCIX0_PIM2SA, 0 ); /* disable */ + out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + + /*--------------------------------------------------------------------------+ + * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping + * options to not support sizes such as 128/256 MB. + *--------------------------------------------------------------------------*/ + out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); + out32r( PCIX0_PIM0LAH, 0 ); + out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + + out32r( PCIX0_BAR0, 0 ); + + /*--------------------------------------------------------------------------+ + * Program the board's subsystem id/vendor id + *--------------------------------------------------------------------------*/ + out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); + out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); + + out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ + +/************************************************************************* + * is_pci_host + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int is_pci_host(struct pci_controller *hose) +{ + /* The ocotea board is always configured as host. */ + return(1); +} +#endif /* defined(CONFIG_PCI) */ + +/************************************************************************* + * pci_master_init + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) +void pci_master_init(struct pci_controller *hose) +{ + /*--------------------------------------------------------------------------+ + | PowerPC440 PCI Master configuration. + | Map PLB/processor addresses to PCI memory space. + | PLB address 0xA0000000-0xCFFFFFFF ==> PCI address 0x80000000-0xCFFFFFFF + | Use byte reversed out routines to handle endianess. + | Make this region non-prefetchable. + +--------------------------------------------------------------------------*/ + out32r( PCIX0_POM0SA, 0 ); /* disable */ + out32r( PCIX0_POM1SA, 0 ); /* disable */ + out32r( PCIX0_POM2SA, 0 ); /* disable */ + + out32r(PCIX0_POM0LAL, CFG_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIX0_POM0LAH, 0x00000003); /* PMM0 Local Address */ + out32r(PCIX0_POM0PCIAL, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIX0_POM0PCIAH, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIX0_POM0SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ + + out32r(PCIX0_POM1LAL, CFG_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIX0_POM1LAH, 0x00000003); /* PMM0 Local Address */ + out32r(PCIX0_POM1PCIAL, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIX0_POM1PCIAH, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */ + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + + return (ctrlc()); +} +#endif + +void board_reset(void) +{ + /* + * Initiate chip reset in debug control register DBCR + */ + mtspr(dbcr0, 0x20000000); +} diff --git a/board/prodrive/alpr/config.mk b/board/prodrive/alpr/config.mk new file mode 100644 index 0000000..9e18335 --- /dev/null +++ b/board/prodrive/alpr/config.mk @@ -0,0 +1,44 @@ +# +# (C) Copyright 2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# AMCC 440GX Reference Platform (Ocotea) board +# + +#TEXT_BASE = 0xFFFE0000 + +ifeq ($(ramsym),1) +TEXT_BASE = 0x07FD0000 +else +TEXT_BASE = 0xFFFC0000 +endif + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/board/prodrive/alpr/flash.c b/board/prodrive/alpr/flash.c new file mode 100644 index 0000000..8fa0084 --- /dev/null +++ b/board/prodrive/alpr/flash.c @@ -0,0 +1,70 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +/* + * include common flash code (for esd boards) + */ +#include "../common/flash.c" + +/* + * Prototypes + */ +static ulong flash_get_size (vu_long * addr, flash_info_t * info); + +unsigned long flash_init(void) +{ + unsigned long size; + int i; + + /* Init: no FLASHes known */ + for (i=0; i<CFG_MAX_FLASH_BANKS; i++) + flash_info[i].flash_id = FLASH_UNKNOWN; + + size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]); + + if (flash_info[0].flash_id == FLASH_UNKNOWN) + printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", + size, size<<20); + + /* Monitor protection ON by default */ + flash_protect(FLAG_PROTECT_SET, -CFG_MONITOR_LEN, 0xffffffff, + &flash_info[0]); + + /* Environment protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR, + CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1, + &flash_info[CFG_MAX_FLASH_BANKS - 1]); + + /* Redundant environment protection ON by default */ + flash_protect(FLAG_PROTECT_SET, + CFG_ENV_ADDR_REDUND, + CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1, + &flash_info[CFG_MAX_FLASH_BANKS - 1]); + + flash_info[0].size = size; + + return size; +} diff --git a/board/prodrive/alpr/fpga.c b/board/prodrive/alpr/fpga.c new file mode 100644 index 0000000..78307b4 --- /dev/null +++ b/board/prodrive/alpr/fpga.c @@ -0,0 +1,264 @@ +/* + * (C) Copyright 2006 + * Heiko Schocher, DENX Software Engineering, hs@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* + * Altera FPGA configuration support for the ALPR computer from prodrive + */ + +#include <common.h> +#include <altera.h> +#include <ACEX1K.h> +#include <command.h> +#include <asm-ppc/processor.h> +#include <ppc440.h> +#include "fpga.h" + +DECLARE_GLOBAL_DATA_PTR; + +#if (CONFIG_FPGA) + +#ifdef FPGA_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +static unsigned long regval; + +#define SET_GPIO_REG_0(reg, bit) {\ + regval = in32(reg);\ + regval &= ~(0x80000000 >> bit);\ + out32(reg, regval);\ + } + +#define SET_GPIO_REG_1(reg, bit) {\ + regval = in32(reg);\ + regval |= (0x80000000 >> bit);\ + out32(reg, regval);\ + } + +#define GPIO_CLK_PIN 0x00002000 +#define GPIO_CLK_PIN_I 0xffffdfff +#define GPIO_DAT_PIN 0x00001000 +#define GPIO_DAT_PIN_I 0xffffefff +#define GPIO_CLKDAT_PIN_I 0xffffcfff + +#define SET_GPIO_CLK_0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_CLK_PIN_I); +#define SET_GPIO_CLK_1 out32(GPIO0_OR, in32(GPIO0_OR) | GPIO_CLK_PIN); +#define SET_GPIO_DAT_0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_DAT_PIN_I); +#define SET_GPIO_DAT_1 out32(GPIO0_OR, in32(GPIO0_OR) | GPIO_DAT_PIN); + +#define SET_GPIO_0(bit) SET_GPIO_REG_0(GPIO0_OR, bit) +#define SET_GPIO_1(bit) SET_GPIO_REG_1(GPIO0_OR, bit) + +#define SET_GPIO_CLK_0_Z1 out32(GPIO0_OR, (in32(GPIO0_OR) & GPIO_CLK_PIN_I) | GPIO_DAT_PIN); +#define SET_GPIO_CLK_0_Z0 out32(GPIO0_OR, in32(GPIO0_OR) & GPIO_CLKDAT_PIN_I); + +#define FPGA_WRITE_1 { \ + SET_GPIO_CLK_0_Z1\ + SET_GPIO_CLK_1} + +#define FPGA_WRITE_0 { \ + SET_GPIO_CLK_0_Z0\ + SET_GPIO_CLK_1} + +#define P_GP(reg) (reg & 0x00023f00) + +/* Plattforminitializations */ +/* Here we have to set the FPGA Chain */ +/* PROGRAM_PROG_EN = HIGH */ +/* PROGRAM_SEL_DPR = LOW */ +int fpga_pre_fn (int cookie) +{ + unsigned long reg; + + reg = in32(GPIO0_IR); + /* Enable the FPGA Chain */ + SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_PROG_EN); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_PROG_EN); + SET_GPIO_1(CFG_GPIO_PROG_EN); + SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_SEL_DPR); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_SEL_DPR); + SET_GPIO_0((CFG_GPIO_SEL_DPR)); + + /* initialize the GPIO Pins */ + /* output */ + SET_GPIO_0(CFG_GPIO_CLK); + SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CLK); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CLK); + + /* output */ + SET_GPIO_0(CFG_GPIO_DATA); + SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_DATA); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_DATA); + + /* First we set STATUS to 0 then as an input */ + SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_STATUS); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS); + SET_GPIO_0(CFG_GPIO_STATUS); + SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_STATUS); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_STATUS); + + /* output */ + SET_GPIO_REG_1(GPIO0_TCR, CFG_GPIO_CONFIG); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CONFIG); + SET_GPIO_0(CFG_GPIO_CONFIG); + + /* input */ + SET_GPIO_0(CFG_GPIO_CON_DON); + SET_GPIO_REG_0(GPIO0_TCR, CFG_GPIO_CON_DON); + SET_GPIO_REG_0(GPIO0_ODR, CFG_GPIO_CON_DON); + + /* CONFIG = 0 STATUS = 0 -> FPGA in reset state */ + SET_GPIO_0(CFG_GPIO_CONFIG); + return FPGA_SUCCESS; +} + +/* Set the state of CONFIG Pin */ +int fpga_config_fn (int assert_config, int flush, int cookie) +{ + if (assert_config) { + SET_GPIO_1(CFG_GPIO_CONFIG); + } else { + SET_GPIO_0(CFG_GPIO_CONFIG); + } + return FPGA_SUCCESS; +} + +/* Returns the state of STATUS Pin */ +int fpga_status_fn (int cookie) +{ + unsigned long reg; + + reg = in32(GPIO0_IR); + if (reg &= (0x80000000 >> CFG_GPIO_STATUS)) { + PRINTF("STATUS = HIGH\n"); + return FPGA_FAIL; + } + PRINTF("STATUS = LOW\n"); + return FPGA_SUCCESS; +} + +/* Returns the state of CONF_DONE Pin */ +int fpga_done_fn (int cookie) +{ + unsigned long reg; + reg = in32(GPIO0_IR); + if (reg &= (0x80000000 >> CFG_GPIO_CON_DON)) { + PRINTF("CONF_DON = HIGH\n"); + return FPGA_FAIL; + } + PRINTF("CONF_DON = LOW\n"); + return FPGA_SUCCESS; +} + +/* writes the complete buffer to the FPGA + writing the complete buffer in one function is very faster, + then calling it for every bit */ +int fpga_write_fn (void *buf, size_t len, int flush, int cookie) +{ + size_t bytecount = 0; + unsigned char *data = (unsigned char *) buf; + unsigned char val=0; + int i; + + while (bytecount < len) { +#ifdef CFG_FPGA_CHECK_CTRLC + if (ctrlc ()) { + return FPGA_FAIL; + } +#endif + val = data[bytecount ++ ]; + i = 8; + do { + if (val & 0x01) { + FPGA_WRITE_1; + } else { + FPGA_WRITE_0; + } + val >>= 1; + i --; + } while (i > 0); + +#ifdef CFG_FPGA_PROG_FEEDBACK + if (bytecount % (len / 40) == 0) + putc ('.'); /* let them know we are alive */ +#endif + } + return FPGA_SUCCESS; +} + +/* called, when programming is aborted */ +int fpga_abort_fn (int cookie) +{ + SET_GPIO_1((CFG_GPIO_SEL_DPR)); + return FPGA_SUCCESS; +} + +/* called, when programming was succesful */ +int fpga_post_fn (int cookie) +{ + return fpga_abort_fn (cookie); +} + +/* Note that these are pointers to code that is in Flash. They will be + * relocated at runtime. + */ +Altera_CYC2_Passive_Serial_fns fpga_fns = { + fpga_pre_fn, + fpga_config_fn, + fpga_status_fn, + fpga_done_fn, + fpga_write_fn, + fpga_abort_fn, + fpga_post_fn +}; + +Altera_desc fpga[CONFIG_FPGA_COUNT] = { + {Altera_CYC2, + passive_serial, + Altera_EP2C35_SIZE, + (void *) &fpga_fns, + NULL, + 0} +}; + +/* + * Initialize the fpga. Return 1 on success, 0 on failure. + */ +int alpr_fpga_init (void) +{ + int i; + + PRINTF ("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n", __FUNCTION__, __LINE__, gd->reloc_off); + fpga_init (gd->reloc_off); + + for (i = 0; i < CONFIG_FPGA_COUNT; i++) { + PRINTF ("%s:%d: Adding fpga %d\n", __FUNCTION__, __LINE__, i); + fpga_add (fpga_altera, &fpga[i]); + } + return 1; +} + +#endif diff --git a/board/prodrive/alpr/init.S b/board/prodrive/alpr/init.S new file mode 100644 index 0000000..1baa609 --- /dev/null +++ b/board/prodrive/alpr/init.S @@ -0,0 +1,104 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <ppc_asm.tmpl> +#include <config.h> + +/* General */ +#define TLB_VALID 0x00000200 + +/* Supported page sizes */ +#define SZ_1K 0x00000000 +#define SZ_4K 0x00000010 +#define SZ_16K 0x00000020 +#define SZ_64K 0x00000030 +#define SZ_256K 0x00000040 +#define SZ_1M 0x00000050 +#define SZ_8M 0x00000060 +#define SZ_16M 0x00000070 +#define SZ_256M 0x00000090 + +/* Storage attributes */ +#define SA_W 0x00000800 /* Write-through */ +#define SA_I 0x00000400 /* Caching inhibited */ +#define SA_M 0x00000200 /* Memory coherence */ +#define SA_G 0x00000100 /* Guarded */ +#define SA_E 0x00000080 /* Endian */ + +/* Access control */ +#define AC_X 0x00000024 /* Execute */ +#define AC_W 0x00000012 /* Write */ +#define AC_R 0x00000009 /* Read */ + +/* Some handy macros */ + +#define EPN(e) ((e) & 0xfffffc00) +#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) +#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) +#define TLB2(a) ( (a)&0x00000fbf ) + +#define tlbtab_start\ + mflr r1 ;\ + bl 0f ; + +#define tlbtab_end\ + .long 0, 0, 0 ; \ +0: mflr r0 ; \ + mtlr r1 ; \ + blr ; + +#define tlbentry(epn,sz,rpn,erpn,attr)\ + .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) + + +/************************************************************************** + * TLB TABLE + * + * This table is used by the cpu boot code to setup the initial tlb + * entries. Rather than make broad assumptions in the cpu source tree, + * this table lets each board set things up however they like. + * + * Pointer to the table is returned in r1 + * + *************************************************************************/ + + .section .bootpg,"ax" + .globl tlbtab + +tlbtab: + tlbtab_start + tlbentry( 0xff000000, SZ_16M, 0xff000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_ISRAM_BASE, SZ_4K, 0x80000000, 0, AC_R|AC_W|AC_X ) + tlbentry( CFG_ISRAM_BASE + 0x1000, SZ_4K, 0x80001000, 0, AC_R|AC_W|AC_X ) + tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I ) + + /* PCI */ + tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 3, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 3, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 3, AC_R|AC_W|SA_G|SA_I ) + + /* NAND */ + tlbentry( CFG_NAND_BASE, SZ_4K, CFG_NAND_BASE, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbtab_end diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c new file mode 100644 index 0000000..20a8098 --- /dev/null +++ b/board/prodrive/alpr/nand.c @@ -0,0 +1,173 @@ +/* + * (C) Copyright 2006 + * Heiko Schocher, DENX Software Engineering, hs@denx.de + * + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) + +#include <asm/processor.h> +#include <nand.h> + +struct alpr_ndfc_regs { + u16 cmd[4]; + u16 addr_wait; + u16 term; + u16 dummy; + u16 dummy2; + u16 data; +}; + +static u8 hwctl; +static struct alpr_ndfc_regs *alpr_ndfc = NULL; + +#define readb(addr) (u8)(*(volatile u16 *)(addr)) +#define writeb(d,addr) *(volatile u16 *)(addr) = ((u16)(d)) + +/* + * The ALPR has a NAND Flash Controller (NDFC) that handles all accesses to + * the NAND devices. The NDFC has command, address and data registers that + * when accessed will set up the NAND flash pins appropriately. We'll use the + * hwcontrol function to save the configuration in a global variable. + * We can then use this information in the read and write functions to + * determine which NDFC register to access. + * + * There are 2 NAND devices on the board, a Hynix HY27US08561A (1 GByte). + */ +static void alpr_nand_hwcontrol(struct mtd_info *mtd, int cmd) +{ + switch (cmd) { + case NAND_CTL_SETCLE: + hwctl |= 0x1; + break; + case NAND_CTL_CLRCLE: + hwctl &= ~0x1; + break; + case NAND_CTL_SETALE: + hwctl |= 0x2; + break; + case NAND_CTL_CLRALE: + hwctl &= ~0x2; + break; + case NAND_CTL_SETNCE: + break; + case NAND_CTL_CLRNCE: + writeb(0x00, &(alpr_ndfc->term)); + break; + } +} + +static void alpr_nand_write_byte(struct mtd_info *mtd, u_char byte) +{ + struct nand_chip *nand = mtd->priv; + + if (hwctl & 0x1) + /* + * IO_ADDR_W used as CMD[i] reg to support multiple NAND + * chips. + */ + writeb(byte, nand->IO_ADDR_W); + else if (hwctl & 0x2) { + writeb(byte, &(alpr_ndfc->addr_wait)); + } else + writeb(byte, &(alpr_ndfc->data)); +} + +static u_char alpr_nand_read_byte(struct mtd_info *mtd) +{ + return readb(&(alpr_ndfc->data)); +} + +static void alpr_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) +{ + struct nand_chip *nand = mtd->priv; + int i; + + for (i = 0; i < len; i++) { + if (hwctl & 0x1) + /* + * IO_ADDR_W used as CMD[i] reg to support multiple NAND + * chips. + */ + writeb(buf[i], nand->IO_ADDR_W); + else if (hwctl & 0x2) + writeb(buf[i], &(alpr_ndfc->addr_wait)); + else + writeb(buf[i], &(alpr_ndfc->data)); + } +} + +static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) { + buf[i] = readb(&(alpr_ndfc->data)); + } +} + +static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) +{ + int i; + + for (i = 0; i < len; i++) + if (buf[i] != readb(&(alpr_ndfc->data))) + return i; + + return 0; +} + +static int alpr_nand_dev_ready(struct mtd_info *mtd) +{ + volatile u_char val; + + /* + * Blocking read to wait for NAND to be ready + */ + val = readb(&(alpr_ndfc->addr_wait)); + + /* + * Return always true + */ + return 1; +} + +void board_nand_init(struct nand_chip *nand) +{ + alpr_ndfc = (struct alpr_ndfc_regs *)CFG_NAND_BASE; + + nand->eccmode = NAND_ECC_SOFT; + + /* Reference hardware control function */ + nand->hwcontrol = alpr_nand_hwcontrol; + /* Set command delay time */ + nand->write_byte = alpr_nand_write_byte; + nand->read_byte = alpr_nand_read_byte; + nand->write_buf = alpr_nand_write_buf; + nand->read_buf = alpr_nand_read_buf; + nand->verify_buf = alpr_nand_verify_buf; + nand->dev_ready = alpr_nand_dev_ready; +} +#endif diff --git a/board/prodrive/alpr/u-boot.lds b/board/prodrive/alpr/u-boot.lds new file mode 100644 index 0000000..4f04089 --- /dev/null +++ b/board/prodrive/alpr/u-boot.lds @@ -0,0 +1,157 @@ +/* + * (C) Copyright 2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + board/prodrive/alpr/init.o (.text) + cpu/ppc4xx/kgdb.o (.text) + cpu/ppc4xx/traps.o (.text) + cpu/ppc4xx/interrupts.o (.text) + cpu/ppc4xx/serial.o (.text) + cpu/ppc4xx/cpu_init.o (.text) + cpu/ppc4xx/speed.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + +/* . = env_offset;*/ +/* common/environment.o(.text)*/ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + *(.eh_frame) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/prodrive/common/flash.c b/board/prodrive/common/flash.c index 8630cc1..363631f 100644 --- a/board/prodrive/common/flash.c +++ b/board/prodrive/common/flash.c @@ -48,6 +48,7 @@ void flash_print_info(flash_info_t *info) case FLASH_MAN_AMD: printf ("AMD "); break; case FLASH_MAN_FUJ: printf ("FUJITSU "); break; case FLASH_MAN_SST: printf ("SST "); break; + case FLASH_MAN_STM: printf ("ST "); break; case FLASH_MAN_EXCEL: printf ("Excel Semiconductor "); break; default: printf ("Unknown Vendor "); break; } @@ -156,6 +157,9 @@ static ulong flash_get_size(vu_long *addr, flash_info_t *info) case (CFG_FLASH_WORD_SIZE)SST_MANUFACT: info->flash_id = FLASH_MAN_SST; break; + case (CFG_FLASH_WORD_SIZE)STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; case (CFG_FLASH_WORD_SIZE)EXCEL_MANUFACT: info->flash_id = FLASH_MAN_EXCEL; break; diff --git a/common/Makefile b/common/Makefile index 07ddc95..0106088 100644 --- a/common/Makefile +++ b/common/Makefile @@ -41,7 +41,7 @@ COBJS = main.o ACEX1K.o altera.o bedbug.o circbuf.o \ cmd_pci.o cmd_pcmcia.o cmd_portio.o \ cmd_reginfo.o cmd_reiser.o cmd_scsi.o cmd_spi.o cmd_universe.o \ cmd_usb.o cmd_vfd.o \ - command.o console.o devices.o dlmalloc.o docecc.o \ + command.o console.o cyclon2.o devices.o dlmalloc.o docecc.o \ environment.o env_common.o \ env_nand.o env_dataflash.o env_flash.o env_eeprom.o \ env_nvram.o env_nowhere.o \ diff --git a/common/altera.c b/common/altera.c index ebd5038..06e8a95 100644 --- a/common/altera.c +++ b/common/altera.c @@ -50,15 +50,20 @@ int altera_load( Altera_desc *desc, void *buf, size_t bsize ) { int ret_val = FPGA_FAIL; /* assume a failure */ - if (!altera_validate (desc, __FUNCTION__)) { + if (!altera_validate (desc, (char *)__FUNCTION__)) { printf ("%s: Invalid device descriptor\n", __FUNCTION__); } else { switch (desc->family) { case Altera_ACEX1K: + case Altera_CYC2: #if (CONFIG_FPGA & CFG_ACEX1K) PRINTF ("%s: Launching the ACEX1K Loader...\n", __FUNCTION__); ret_val = ACEX1K_load (desc, buf, bsize); +#elif (CONFIG_FPGA & CFG_CYCLON2) + PRINTF ("%s: Launching the CYCLON II Loader...\n", + __FUNCTION__); + ret_val = CYC2_load (desc, buf, bsize); #else printf ("%s: No support for ACEX1K devices.\n", __FUNCTION__); @@ -78,7 +83,7 @@ int altera_dump( Altera_desc *desc, void *buf, size_t bsize ) { int ret_val = FPGA_FAIL; /* assume a failure */ - if (!altera_validate (desc, __FUNCTION__)) { + if (!altera_validate (desc, (char *)__FUNCTION__)) { printf ("%s: Invalid device descriptor\n", __FUNCTION__); } else { switch (desc->family) { @@ -106,13 +111,16 @@ int altera_info( Altera_desc *desc ) { int ret_val = FPGA_FAIL; - if (altera_validate (desc, __FUNCTION__)) { + if (altera_validate (desc, (char *)__FUNCTION__)) { printf ("Family: \t"); switch (desc->family) { case Altera_ACEX1K: printf ("ACEX1K\n"); break; /* Add new family types here */ + case Altera_CYC2: + printf ("CYCLON II\n"); + break; default: printf ("Unknown family type, %d\n", desc->family); } @@ -147,8 +155,11 @@ int altera_info( Altera_desc *desc ) printf ("Device Function Table @ 0x%p\n", desc->iface_fns); switch (desc->family) { case Altera_ACEX1K: + case Altera_CYC2: #if (CONFIG_FPGA & CFG_ACEX1K) ACEX1K_info (desc); +#elif (CONFIG_FPGA & CFG_CYCLON2) + CYC2_info (desc); #else /* just in case */ printf ("%s: No support for ACEX1K devices.\n", @@ -176,7 +187,7 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset) { int ret_val = FPGA_FAIL; /* assume a failure */ - if (!altera_validate (desc, __FUNCTION__)) { + if (!altera_validate (desc, (char *)__FUNCTION__)) { printf ("%s: Invalid device descriptor\n", __FUNCTION__); } else { switch (desc->family) { @@ -188,6 +199,14 @@ int altera_reloc( Altera_desc *desc, ulong reloc_offset) __FUNCTION__); #endif break; + case Altera_CYC2: +#if (CONFIG_FPGA & CFG_CYCLON2) + ret_val = CYC2_reloc (desc, reloc_offset); +#else + printf ("%s: No support for CYCLON II devices.\n", + __FUNCTION__); +#endif + break; /* Add new family types here */ default: printf ("%s: Unsupported family type, %d\n", diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c index 9a01e7d..3444091 100644 --- a/common/cmd_fpga.c +++ b/common/cmd_fpga.c @@ -55,6 +55,7 @@ static int fpga_get_op (char *opstr); #define FPGA_LOAD 1 #define FPGA_LOADB 2 #define FPGA_DUMP 3 +#define FPGA_LOADMK 4 /* Convert bitstream data and load into the fpga */ int fpga_loadbitstream(unsigned long dev, char* fpgadata, size_t size) @@ -251,6 +252,23 @@ int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) rc = fpga_loadbitstream(dev, fpga_data, data_size); break; + case FPGA_LOADMK: + { + image_header_t header; + image_header_t *hdr = &header; + ulong data; + + memmove (&header, (char *)fpga_data, sizeof(image_header_t)); + if (ntohl(hdr->ih_magic) != IH_MAGIC) { + puts ("Bad Magic Number\n"); + return 1; + } + data = ((ulong)fpga_data + sizeof(image_header_t)); + data_size = ntohl(hdr->ih_size); + rc = fpga_load (dev, (void *)data, data_size); + } + break; + case FPGA_DUMP: rc = fpga_dump (dev, fpga_data, data_size); break; @@ -282,6 +300,8 @@ static int fpga_get_op (char *opstr) op = FPGA_LOADB; } else if (!strcmp ("load", opstr)) { op = FPGA_LOAD; + } else if (!strcmp ("loadmk", opstr)) { + op = FPGA_LOADMK; } else if (!strcmp ("dump", opstr)) { op = FPGA_DUMP; } @@ -299,5 +319,6 @@ U_BOOT_CMD (fpga, 6, 1, do_fpga, "\tinfo\tlist known device information\n" "\tload\tLoad device from memory buffer\n" "\tloadb\tLoad device from bitstream buffer (Xilinx devices only)\n" + "\tloadmk\tLoad device generated with mkimage\n" "\tdump\tLoad device to memory buffer\n"); #endif /* CONFIG_FPGA && CONFIG_COMMANDS & CFG_CMD_FPGA */ diff --git a/common/cyclon2.c b/common/cyclon2.c new file mode 100644 index 0000000..dce13b5 --- /dev/null +++ b/common/cyclon2.c @@ -0,0 +1,305 @@ +/* + * (C) Copyright 2006 + * Heiko Schocher, hs@denx.de + * Based on ACE1XK.c + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +#include <common.h> /* core U-Boot definitions */ +#include <altera.h> +#include <ACEX1K.h> /* ACEX device family */ + +#if (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) + +/* Define FPGA_DEBUG to get debug printf's */ +#ifdef FPGA_DEBUG +#define PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define PRINTF(fmt,args...) +#endif + +/* Note: The assumption is that we cannot possibly run fast enough to + * overrun the device (the Slave Parallel mode can free run at 50MHz). + * If there is a need to operate slower, define CONFIG_FPGA_DELAY in + * the board config file to slow things down. + */ +#ifndef CONFIG_FPGA_DELAY +#define CONFIG_FPGA_DELAY() +#endif + +#ifndef CFG_FPGA_WAIT +#define CFG_FPGA_WAIT CFG_HZ/10 /* 100 ms */ +#endif + +static int CYC2_ps_load( Altera_desc *desc, void *buf, size_t bsize ); +static int CYC2_ps_dump( Altera_desc *desc, void *buf, size_t bsize ); +/* static int CYC2_ps_info( Altera_desc *desc ); */ +static int CYC2_ps_reloc( Altera_desc *desc, ulong reloc_offset ); + +/* ------------------------------------------------------------------------- */ +/* CYCLON2 Generic Implementation */ +int CYC2_load (Altera_desc * desc, void *buf, size_t bsize) +{ + int ret_val = FPGA_FAIL; + + switch (desc->iface) { + case passive_serial: + PRINTF ("%s: Launching Passive Serial Loader\n", __FUNCTION__); + ret_val = CYC2_ps_load (desc, buf, bsize); + break; + + /* Add new interface types here */ + + default: + printf ("%s: Unsupported interface type, %d\n", + __FUNCTION__, desc->iface); + } + + return ret_val; +} + +int CYC2_dump (Altera_desc * desc, void *buf, size_t bsize) +{ + int ret_val = FPGA_FAIL; + + switch (desc->iface) { + case passive_serial: + PRINTF ("%s: Launching Passive Serial Dump\n", __FUNCTION__); + ret_val = CYC2_ps_dump (desc, buf, bsize); + break; + + /* Add new interface types here */ + + default: + printf ("%s: Unsupported interface type, %d\n", + __FUNCTION__, desc->iface); + } + + return ret_val; +} + +int CYC2_info( Altera_desc *desc ) +{ + return FPGA_SUCCESS; +} + +int CYC2_reloc (Altera_desc * desc, ulong reloc_offset) +{ + int ret_val = FPGA_FAIL; /* assume a failure */ + + if (desc->family != Altera_CYC2) { + printf ("%s: Unsupported family type, %d\n", + __FUNCTION__, desc->family); + return FPGA_FAIL; + } else + switch (desc->iface) { + case passive_serial: + ret_val = CYC2_ps_reloc (desc, reloc_offset); + break; + + /* Add new interface types here */ + + default: + printf ("%s: Unsupported interface type, %d\n", + __FUNCTION__, desc->iface); + } + + return ret_val; +} + +/* ------------------------------------------------------------------------- */ +/* CYCLON2 Passive Serial Generic Implementation */ +static int CYC2_ps_load (Altera_desc * desc, void *buf, size_t bsize) +{ + int ret_val = FPGA_FAIL; /* assume the worst */ + Altera_CYC2_Passive_Serial_fns *fn = desc->iface_fns; + int ret = 0; + + PRINTF ("%s: start with interface functions @ 0x%p\n", + __FUNCTION__, fn); + + if (fn) { + int cookie = desc->cookie; /* make a local copy */ + unsigned long ts; /* timestamp */ + + PRINTF ("%s: Function Table:\n" + "ptr:\t0x%p\n" + "struct: 0x%p\n" + "config:\t0x%p\n" + "status:\t0x%p\n" + "write:\t0x%p\n" + "done:\t0x%p\n\n", + __FUNCTION__, &fn, fn, fn->config, fn->status, + fn->write, fn->done); +#ifdef CFG_FPGA_PROG_FEEDBACK + printf ("Loading FPGA Device %d...", cookie); +#endif + + /* + * Run the pre configuration function if there is one. + */ + if (*fn->pre) { + (*fn->pre) (cookie); + } + + /* Establish the initial state */ + (*fn->config) (TRUE, TRUE, cookie); /* Assert nCONFIG */ + + udelay(2); /* T_cfg > 2us */ + + /* Wait for nSTATUS to be asserted */ + ts = get_timer (0); /* get current time */ + do { + CONFIG_FPGA_DELAY (); + if (get_timer (ts) > CFG_FPGA_WAIT) { /* check the time */ + puts ("** Timeout waiting for STATUS to go high.\n"); + (*fn->abort) (cookie); + return FPGA_FAIL; + } + } while (!(*fn->status) (cookie)); + + /* Get ready for the burn */ + CONFIG_FPGA_DELAY (); + + ret = (*fn->write) (buf, bsize, TRUE, cookie); + if (ret) { + puts ("** Write failed.\n"); + (*fn->abort) (cookie); + return FPGA_FAIL; + } +#ifdef CFG_FPGA_PROG_FEEDBACK + puts(" OK? ..."); +#endif + + CONFIG_FPGA_DELAY (); + +#ifdef CFG_FPGA_PROG_FEEDBACK + putc (' '); /* terminate the dotted line */ +#endif + + /* + * Checking FPGA's CONF_DONE signal - correctly booted ? + */ + + if ( ! (*fn->done) (cookie) ) { + puts ("** Booting failed! CONF_DONE is still deasserted.\n"); + (*fn->abort) (cookie); + return (FPGA_FAIL); + } +#ifdef CFG_FPGA_PROG_FEEDBACK + puts(" OK\n"); +#endif + + ret_val = FPGA_SUCCESS; + +#ifdef CFG_FPGA_PROG_FEEDBACK + if (ret_val == FPGA_SUCCESS) { + puts ("Done.\n"); + } + else { + puts ("Fail.\n"); + } +#endif + (*fn->post) (cookie); + + } else { + printf ("%s: NULL Interface function table!\n", __FUNCTION__); + } + + return ret_val; +} + +static int CYC2_ps_dump (Altera_desc * desc, void *buf, size_t bsize) +{ + /* Readback is only available through the Slave Parallel and */ + /* boundary-scan interfaces. */ + printf ("%s: Passive Serial Dumping is unavailable\n", + __FUNCTION__); + return FPGA_FAIL; +} + +static int CYC2_ps_reloc (Altera_desc * desc, ulong reloc_offset) +{ + int ret_val = FPGA_FAIL; /* assume the worst */ + Altera_CYC2_Passive_Serial_fns *fn_r, *fn = + (Altera_CYC2_Passive_Serial_fns *) (desc->iface_fns); + + if (fn) { + ulong addr; + + /* Get the relocated table address */ + addr = (ulong) fn + reloc_offset; + fn_r = (Altera_CYC2_Passive_Serial_fns *) addr; + + if (!fn_r->relocated) { + + if (memcmp (fn_r, fn, + sizeof (Altera_CYC2_Passive_Serial_fns)) + == 0) { + /* good copy of the table, fix the descriptor pointer */ + desc->iface_fns = fn_r; + } else { + PRINTF ("%s: Invalid function table at 0x%p\n", + __FUNCTION__, fn_r); + return FPGA_FAIL; + } + + PRINTF ("%s: Relocating descriptor at 0x%p\n", __FUNCTION__, + desc); + + addr = (ulong) (fn->pre) + reloc_offset; + fn_r->pre = (Altera_pre_fn) addr; + + addr = (ulong) (fn->config) + reloc_offset; + fn_r->config = (Altera_config_fn) addr; + + addr = (ulong) (fn->status) + reloc_offset; + fn_r->status = (Altera_status_fn) addr; + + addr = (ulong) (fn->done) + reloc_offset; + fn_r->done = (Altera_done_fn) addr; + + addr = (ulong) (fn->write) + reloc_offset; + fn_r->write = (Altera_write_fn) addr; + + addr = (ulong) (fn->abort) + reloc_offset; + fn_r->abort = (Altera_abort_fn) addr; + + addr = (ulong) (fn->post) + reloc_offset; + fn_r->post = (Altera_post_fn) addr; + + fn_r->relocated = TRUE; + + } else { + /* this table has already been moved */ + /* XXX - should check to see if the descriptor is correct */ + desc->iface_fns = fn_r; + } + + ret_val = FPGA_SUCCESS; + } else { + printf ("%s: NULL Interface function table!\n", __FUNCTION__); + } + + return ret_val; +} + +#endif /* (CONFIG_FPGA & (CFG_ALTERA | CFG_CYCLON2)) */ diff --git a/common/fpga.c b/common/fpga.c index 02d3e42..2eff239 100644 --- a/common/fpga.c +++ b/common/fpga.c @@ -139,7 +139,7 @@ static int fpga_dev_info( int devnum ) printf( "Xilinx Device\nDescriptor @ 0x%p\n", desc ); ret_val = xilinx_info( desc->devdesc ); #else - fpga_no_sup( __FUNCTION__, "Xilinx devices" ); + fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); #endif break; case fpga_altera: @@ -178,7 +178,7 @@ int fpga_reloc( fpga_type devtype, void *desc, ulong reloc_off ) #if CONFIG_FPGA & CFG_FPGA_XILINX ret_val = xilinx_reloc( desc, reloc_off ); #else - fpga_no_sup( __FUNCTION__, "Xilinx devices" ); + fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); #endif break; case fpga_altera: @@ -271,7 +271,7 @@ int fpga_load( int devnum, void *buf, size_t bsize ) #if CONFIG_FPGA & CFG_FPGA_XILINX ret_val = xilinx_load( desc->devdesc, buf, bsize ); #else - fpga_no_sup( __FUNCTION__, "Xilinx devices" ); + fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); #endif break; case fpga_altera: @@ -304,7 +304,7 @@ int fpga_dump( int devnum, void *buf, size_t bsize ) #if CONFIG_FPGA & CFG_FPGA_XILINX ret_val = xilinx_dump( desc->devdesc, buf, bsize ); #else - fpga_no_sup( __FUNCTION__, "Xilinx devices" ); + fpga_no_sup( (char *)__FUNCTION__, "Xilinx devices" ); #endif break; case fpga_altera: diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 03128d3..9b711e2 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -475,7 +475,11 @@ void pci_440_init (struct pci_controller *hose) pci_set_region(hose->regions + reg_num++, CFG_PCI_TARGBASE, CFG_PCI_MEMBASE, +#ifdef CFG_PCI_MEMSIZE + CFG_PCI_MEMSIZE, +#else 0x10000000, +#endif PCI_REGION_MEM ); #if defined(CONFIG_PCI_SYS_MEM_BUS) && defined(CONFIG_PCI_SYS_MEM_PHYS) && \ diff --git a/cpu/ppc4xx/cpu.c b/cpu/ppc4xx/cpu.c index f4a7208..faa5257 100644 --- a/cpu/ppc4xx/cpu.c +++ b/cpu/ppc4xx/cpu.c @@ -41,6 +41,10 @@ DECLARE_GLOBAL_DATA_PTR; #endif +#if defined(CONFIG_BOARD_RESET) +void board_reset(void); +#endif + #if defined(CONFIG_440) #define FREQ_EBC (sys_info.freqEPB) #else @@ -422,23 +426,15 @@ int ppc440spe_revB() { int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { -#if defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE) - /*give reset to BCSR*/ - *(unsigned char*)(CFG_BCSR_BASE | 0x06) = 0x09; - +#if defined(CONFIG_BOARD_RESET) + board_reset(); #else - /* * Initiate system reset in debug control register DBCR */ - __asm__ __volatile__("lis 3, 0x3000" ::: "r3"); -#if defined(CONFIG_440) - __asm__ __volatile__("mtspr 0x134, 3"); -#else - __asm__ __volatile__("mtspr 0x3f2, 3"); -#endif + mtspr(dbcr0, 0x30000000); +#endif /* defined(CONFIG_BOARD_RESET) */ -#endif/* defined(CONFIG_YOSEMITE) || defined(CONFIG_YELLOWSTONE)*/ return 1; } diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c index faeea5c..f06038e 100644 --- a/cpu/ppc4xx/sdram.c +++ b/cpu/ppc4xx/sdram.c @@ -351,6 +351,14 @@ long int initdram(int board_type) int i; int tr1_bank1; +#if defined(CONFIG_440GX) || defined(CONFIG_440EP) || defined(CONFIG_440GR) || defined(CONFIG_440SP) + /* + * Soft-reset SDRAM controller. + */ + mtsdr(sdr_srst, SDR0_SRST_DMC); + mtsdr(sdr_srst, 0x00000000); +#endif + for (i=0; i<N_MB0CF; i++) { /* * Disable memory controller. diff --git a/drivers/nand/nand_base.c b/drivers/nand/nand_base.c index b7a5d32..b003085 100644 --- a/drivers/nand/nand_base.c +++ b/drivers/nand/nand_base.c @@ -2407,7 +2407,9 @@ int nand_scan (struct mtd_info *mtd, int maxchips) } if (!nand_flash_ids[i].name) { +#ifndef CFG_NAND_QUIET_TEST printk (KERN_WARNING "No NAND device found!!!\n"); +#endif this->select_chip(mtd, -1); return 1; } diff --git a/include/ACEX1K.h b/include/ACEX1K.h index f75c463..f249d64 100644 --- a/include/ACEX1K.h +++ b/include/ACEX1K.h @@ -35,6 +35,11 @@ extern int ACEX1K_dump( Altera_desc *desc, void *buf, size_t bsize ); extern int ACEX1K_info( Altera_desc *desc ); extern int ACEX1K_reloc( Altera_desc *desc, ulong reloc_off ); +extern int CYC2_load( Altera_desc *desc, void *image, size_t size ); +extern int CYC2_dump( Altera_desc *desc, void *buf, size_t bsize ); +extern int CYC2_info( Altera_desc *desc ); +extern int CYC2_reloc( Altera_desc *desc, ulong reloc_off ); + /* Slave Serial Implementation function table */ typedef struct { Altera_pre_fn pre; @@ -48,6 +53,18 @@ typedef struct { int relocated; } Altera_ACEX1K_Passive_Serial_fns; +/* Slave Serial Implementation function table */ +typedef struct { + Altera_pre_fn pre; + Altera_config_fn config; + Altera_status_fn status; + Altera_done_fn done; + Altera_write_fn write; + Altera_abort_fn abort; + Altera_post_fn post; + int relocated; +} Altera_CYC2_Passive_Serial_fns; + /* Device Image Sizes *********************************************************************/ /* ACEX1K */ @@ -60,6 +77,8 @@ typedef struct { #endif #define Altera_EP1K100_SIZE (166965*8) +#define Altera_EP2C35_SIZE 883905 + /* Descriptor Macros *********************************************************************/ /* ACEX1K devices */ diff --git a/include/altera.h b/include/altera.h index 74b6729..7b8cb4a 100644 --- a/include/altera.h +++ b/include/altera.h @@ -34,8 +34,10 @@ /* Altera Model definitions *********************************************************************/ #define CFG_ACEX1K CFG_FPGA_DEV( 0x1 ) +#define CFG_CYCLON2 CFG_FPGA_DEV( 0x2 ) #define CFG_ALTERA_ACEX1K (CFG_FPGA_ALTERA | CFG_ACEX1K) +#define CFG_ALTERA_CYCLON2 (CFG_FPGA_ALTERA | CFG_CYCLON2) /* Add new models here */ /* Altera Interface definitions @@ -56,6 +58,7 @@ typedef enum { /* typedef Altera_iface */ typedef enum { /* typedef Altera_Family */ min_altera_type, /* insert all new types after this */ Altera_ACEX1K, /* ACEX1K Family */ + Altera_CYC2, /* CYCLONII Family */ /* Add new models here */ max_altera_type /* insert all new types before this */ } Altera_Family; /* end, typedef Altera_Family */ @@ -84,6 +87,7 @@ typedef int (*Altera_status_fn)( int cookie ); typedef int (*Altera_done_fn)( int cookie ); typedef int (*Altera_clk_fn)( int assert_clk, int flush, int cookie ); typedef int (*Altera_data_fn)( int assert_data, int flush, int cookie ); +typedef int (*Altera_write_fn)(void *buf, size_t len, int flush, int cookie); typedef int (*Altera_abort_fn)( int cookie ); typedef int (*Altera_post_fn)( int cookie ); diff --git a/include/configs/alpr.h b/include/configs/alpr.h new file mode 100644 index 0000000..c6731ba --- /dev/null +++ b/include/configs/alpr.h @@ -0,0 +1,352 @@ +/* + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +/*----------------------------------------------------------------------- + * High Level Configuration Options + *----------------------------------------------------------------------*/ +#define CONFIG_ALPR 1 /* Board is ebony */ +#define CONFIG_440GX 1 /* Specifc GX support */ +#define CONFIG_4xx 1 /* ... PPC4xx family */ +#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ +#define CONFIG_BOARD_RESET 1 /* call board_reset() */ +#undef CFG_DRAM_TEST /* Disable-takes long time! */ +#define CONFIG_SYS_CLK_FREQ 33333000 /* external freq to pll */ + +/*----------------------------------------------------------------------- + * Base addresses -- Note these are effective addresses where the + * actual resources get mapped (not physical addresses) + *----------------------------------------------------------------------*/ +#define CFG_SDRAM_BASE 0x00000000 /* _must_ be 0 */ +#define CFG_FLASH_BASE 0xffe00000 /* start of FLASH */ +#define CFG_MONITOR_BASE 0xfffc0000 /* start of monitor */ +#define CFG_PCI_MEMBASE 0x80000000 /* mapped pci memory */ +#define CFG_PCI_MEMSIZE 0x40000000 /* size of mapped pci memory */ +#define CFG_PERIPHERAL_BASE 0xe0000000 /* internal peripherals */ +#define CFG_ISRAM_BASE 0xc0000000 /* internal SRAM */ +#define CFG_PCI_BASE 0xd0000000 /* internal PCI regs */ +#define CFG_PCI_MEMBASE1 CFG_PCI_MEMBASE + 0x10000000 +#define CFG_PCI_MEMBASE2 CFG_PCI_MEMBASE1 + 0x10000000 +#define CFG_PCI_MEMBASE3 CFG_PCI_MEMBASE2 + 0x10000000 + + +#define CFG_FPGA_BASE (CFG_PERIPHERAL_BASE + 0x08300000) +#define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000) + +/*----------------------------------------------------------------------- + * Initial RAM & stack pointer (placed in internal SRAM) + *----------------------------------------------------------------------*/ +#define CFG_TEMP_STACK_OCM 1 +#define CFG_OCM_DATA_ADDR CFG_ISRAM_BASE +#define CFG_INIT_RAM_ADDR CFG_ISRAM_BASE /* Initial RAM address */ +#define CFG_INIT_RAM_END 0x2000 /* End of used area in RAM */ +#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ + +#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) +#define CFG_POST_WORD_ADDR (CFG_GBL_DATA_OFFSET - 0x4) +#define CFG_INIT_SP_OFFSET CFG_POST_WORD_ADDR + +#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc*/ + +/*----------------------------------------------------------------------- + * Serial Port + *----------------------------------------------------------------------*/ +#undef CFG_EXT_SERIAL_CLOCK +#define CONFIG_BAUDRATE 115200 +#define CONFIG_UART1_CONSOLE /* define for uart1 as console */ + +#define CFG_BAUDRATE_TABLE \ + {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} + +/*----------------------------------------------------------------------- + * FLASH related + *----------------------------------------------------------------------*/ +#define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ + +#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ +#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ + +#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ +#define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ + +#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */ +#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ +#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ +/* + * The following defines are added for buggy IOP480 byte interface. + * All other boards should use the standard values (CPCI405 etc.) + */ +#define CFG_FLASH_READ0 0x0000 /* 0 is standard */ +#define CFG_FLASH_READ1 0x0001 /* 1 is standard */ +#define CFG_FLASH_READ2 0x0002 /* 2 is standard */ + +#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ + +#define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ + +#define CFG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ +#define CFG_ENV_ADDR (CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ + +/* Address and size of Redundant Environment Sector */ +#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR-CFG_ENV_SECT_SIZE) +#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) + +/*----------------------------------------------------------------------- + * DDR SDRAM + *----------------------------------------------------------------------*/ +#undef CONFIG_SPD_EEPROM /* Don't use SPD EEPROM for setup */ +#define CONFIG_SDRAM_BANK0 1 /* init onboard DDR SDRAM bank 0 */ +#undef CONFIG_SDRAM_ECC /* enable ECC support */ +#define CFG_SDRAM_TABLE { \ + {(256 << 20), 13, 0x000C4001}, /* 256MB mode 3, 13x10(4)*/ \ + {(64 << 20), 12, 0x00082001}} /* 64MB mode 2, 12x9(4) */ + +/*----------------------------------------------------------------------- + * I2C + *----------------------------------------------------------------------*/ +#define CONFIG_HARD_I2C 1 /* I2C with hardware support */ +#undef CONFIG_SOFT_I2C /* I2C bit-banged */ +#define CFG_I2C_SPEED 100000 /* I2C speed and slave address */ +#define CFG_I2C_SLAVE 0x7F +#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ + +/*----------------------------------------------------------------------- + * I2C EEPROM (PCF8594C) + *----------------------------------------------------------------------*/ +#define CFG_I2C_EEPROM_ADDR 0x54 /* EEPROM PCF8594C */ +#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ +/* mask of address bits that overflow into the "EEPROM chip address" */ +#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07 +#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* The Philips PCF8594C has */ + /* 8 byte page write mode using */ + /* last 3 bits of the address */ +#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 40 /* and takes up to 40 msec */ +#define CFG_EEPROM_PAGE_WRITE_ENABLE + +#define CONFIG_PREBOOT "echo;" \ + "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ + "echo" + +#undef CONFIG_BOOTARGS + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "hostname=alpr\0" \ + "nfsargs=setenv bootargs root=/dev/nfs rw " \ + "nfsroot=${serverip}:${rootpath}\0" \ + "ramargs=setenv bootargs root=/dev/ram rw\0" \ + "addip=setenv bootargs ${bootargs} " \ + "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ + ":${hostname}:${netdev}:off panic=1\0" \ + "addtty=setenv bootargs ${bootargs} console=ttyS1,${baudrate}\0"\ + "flash_nfs=run nfsargs addip addtty;" \ + "bootm ${kernel_addr}\0" \ + "flash_self=run ramargs addip addtty;" \ + "bootm ${kernel_addr} ${ramdisk_addr}\0" \ + "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ + "bootm\0" \ + "rootpath=/opt/eldk/ppc_4xx\0" \ + "bootfile=/tftpboot/alpr/uImage\0" \ + "kernel_addr=fff00000\0" \ + "ramdisk_addr=fff10000\0" \ + "load=tftp 100000 /tftpboot/alpr/u-boot.bin\0" \ + "update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;" \ + "cp.b 100000 fffc0000 40000;" \ + "setenv filesize;saveenv\0" \ + "upd=run load;run update\0" \ + "" +#define CONFIG_BOOTCOMMAND "run flash_self" + +#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ +#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ + +#define CONFIG_MII 1 /* MII PHY management */ +#define CONFIG_NET_MULTI 1 +#define CONFIG_PHY_ADDR 0x02 /* dummy setting, no EMAC0 used */ +#define CONFIG_PHY1_ADDR 0x03 /* dummy setting, no EMAC1 used */ +#define CONFIG_PHY2_ADDR 0x00 /* test-only: will be changed */ +#define CONFIG_PHY3_ADDR 0x01 /* PHY address for EMAC3 */ +#define CONFIG_HAS_ETH0 +#define CONFIG_HAS_ETH1 +#define CONFIG_HAS_ETH2 +#define CONFIG_HAS_ETH3 +#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ +#define CONFIG_88E1111_CLK_DELAY 1 /* set CLK delay on ALPR */ +#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ +#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */ + +#define CONFIG_NETCONSOLE /* include NetConsole support */ + +#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \ + CFG_CMD_ASKENV | \ + CFG_CMD_DHCP | \ + CFG_CMD_DIAG | \ + CFG_CMD_EEPROM | \ + CFG_CMD_ELF | \ + CFG_CMD_I2C | \ + CFG_CMD_IRQ | \ + CFG_CMD_MII | \ + CFG_CMD_NET | \ + CFG_CMD_NFS | \ + CFG_CMD_PCI | \ + CFG_CMD_PING | \ + CFG_CMD_FPGA | \ + CFG_CMD_NAND | \ + CFG_CMD_REGINFO) + +/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */ +#include <cmd_confdefs.h> + +#undef CONFIG_WATCHDOG /* watchdog disabled */ + +/* + * Miscellaneous configurable options + */ +#define CFG_LONGHELP /* undef to save memory */ +#define CFG_PROMPT "=> " /* Monitor Command Prompt */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ +#else +#define CFG_CBSIZE 256 /* Console I/O Buffer Size */ +#endif +#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ +#define CFG_MAXARGS 16 /* max number of command args */ +#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ + +#define CFG_MEMTEST_START 0x0400000 /* memtest works on */ +#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ + +#define CFG_LOAD_ADDR 0x100000 /* default load address */ +#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */ + +#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ + +#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ +#define CONFIG_LOOPW 1 /* enable loopw command */ +#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ +#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ +#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ + +/*----------------------------------------------------------------------- + * PCI stuff + *----------------------------------------------------------------------- + */ +/* General PCI */ +#define CONFIG_PCI /* include pci support */ +#define CONFIG_PCI_PNP /* do pci plug-and-play */ +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ +#define CFG_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to CFG_PCI_MEMBASE */ +#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable*/ + +/* Board-specific PCI */ +#define CFG_PCI_PRE_INIT /* enable board pci_pre_init() */ +#define CFG_PCI_TARGET_INIT /* let board init pci target */ +#define CFG_PCI_MASTER_INIT + +#define CFG_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ +#define CFG_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ + +/*----------------------------------------------------------------------- + * FPGA stuff + *----------------------------------------------------------------------- + */ +#define CONFIG_FPGA CFG_ALTERA_CYCLON2 +#undef CFG_FPGA_CHECK_CTRLC +#undef CFG_FPGA_PROG_FEEDBACK +#define CONFIG_FPGA_COUNT 1 /* Ich habe 2 ... aber in + Reihe geschaltet -> sollte gehen, + aufpassen mit Datasize ist jetzt + halt doppelt so gross ... Seite 306 + ist das mit den multiple Device in PS + Mode erklaert ...*/ + +/* FPGA program pin configuration */ +#define CFG_GPIO_CLK 18 /* FPGA clk pin (cpu output) */ +#define CFG_GPIO_DATA 19 /* FPGA data pin (cpu output) */ +#define CFG_GPIO_STATUS 20 /* FPGA status pin (cpu input) */ +#define CFG_GPIO_CONFIG 21 /* FPGA CONFIG pin (cpu output) */ +#define CFG_GPIO_CON_DON 22 /* FPGA CONFIG_DONE pin (cpu input) */ + +#define CFG_GPIO_SEL_DPR 14 /* cpu output */ +#define CFG_GPIO_SEL_AVR 15 /* cpu output */ +#define CFG_GPIO_PROG_EN 23 /* cpu output */ + +/* + * NAND-FLASH stuff + */ +#define CFG_MAX_NAND_DEVICE 4 +#define NAND_MAX_CHIPS CFG_MAX_NAND_DEVICE +#define CFG_NAND_BASE 0xF0000000 /* NAND FLASH Base Address */ +#define CFG_NAND_BASE_LIST { CFG_NAND_BASE + 0, CFG_NAND_BASE + 2, \ + CFG_NAND_BASE + 4, CFG_NAND_BASE + 6 } +#define CFG_NAND_QUIET_TEST 1 /* don't warn upon unknown NAND flash */ + +/*----------------------------------------------------------------------- + * External Bus Controller (EBC) Setup + *----------------------------------------------------------------------*/ +#define CFG_FLASH CFG_FLASH_BASE + +/* Memory Bank 0 (Flash Bank 0, NOR-FLASH) initialization */ +#define CFG_EBC_PB0AP 0x92015480 +#define CFG_EBC_PB0CR (CFG_FLASH | 0x3A000) /* BS=2MB,BU=R/W,BW=16bit */ + +/* Memory Bank 1 (NAND-FLASH) initialization */ +#define CFG_EBC_PB1AP 0x01840380 /* TWT=3 */ +#define CFG_EBC_PB1CR (CFG_NAND_BASE | 0x1A000) /* BS=1MB,BU=R/W,BW=16bit */ + +/* + * For booting Linux, the board info and command line data + * have to be in the first 8 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ +/*----------------------------------------------------------------------- + * Cache Configuration + */ +#define CFG_DCACHE_SIZE 32768 /* For AMCC 440 CPUs */ +#define CFG_CACHELINE_SIZE 32 /* ... */ +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ +#endif + +/* + * Internal Definitions + * + * Boot Flags + */ +#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ +#define BOOTFLAG_WARM 0x02 /* Software reboot */ + +#if (CONFIG_COMMANDS & CFG_CMD_KGDB) +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ +#endif +#endif /* __CONFIG_H */ diff --git a/include/configs/yellowstone.h b/include/configs/yellowstone.h index ba27f37..58717f8 100644 --- a/include/configs/yellowstone.h +++ b/include/configs/yellowstone.h @@ -37,6 +37,7 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ +#define CONFIG_BOARD_RESET 1 /* call board_reset() */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h index 3d7b4a2..6e942ab 100644 --- a/include/configs/yosemite.h +++ b/include/configs/yosemite.h @@ -37,6 +37,7 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ +#define CONFIG_BOARD_RESET 1 /* call board_reset() */ /*----------------------------------------------------------------------- * Base addresses -- Note these are effective addresses where the diff --git a/include/ppc440.h b/include/ppc440.h index e407320..407daae 100644 --- a/include/ppc440.h +++ b/include/ppc440.h @@ -3183,7 +3183,7 @@ #define GPIO0 0 #define GPIO1 1 -#if defined(CONFIG_440GP) +#if defined(CONFIG_440GP) || defined(CONFIG_440GX) #define GPIO0_BASE (CFG_PERIPHERAL_BASE+0x00000700) #define GPIO0_OR (GPIO0_BASE+0x0) |