diff options
| -rw-r--r-- | doc/device-tree-bindings/serial/microchip,pic32-uart.txt | 5 | ||||
| -rw-r--r-- | drivers/serial/Kconfig | 15 | ||||
| -rw-r--r-- | drivers/serial/Makefile | 1 | ||||
| -rw-r--r-- | drivers/serial/serial_pic32.c | 198 |
4 files changed, 219 insertions, 0 deletions
diff --git a/doc/device-tree-bindings/serial/microchip,pic32-uart.txt b/doc/device-tree-bindings/serial/microchip,pic32-uart.txt new file mode 100644 index 0000000..f00e215 --- /dev/null +++ b/doc/device-tree-bindings/serial/microchip,pic32-uart.txt @@ -0,0 +1,5 @@ +* Microchip PIC32 serial UART + +Required properties: +- compatible: must be "microchip,pic32mzda-uart". +- reg: exactly one register range. diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 1ab6128..fac3176 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -150,6 +150,14 @@ config DEBUG_UART_PL011 work. The driver will be available until the real driver model serial is running. +config DEBUG_UART_PIC32 + bool "Microchip PIC32" + depends on PIC32_SERIAL + help + Select this to enable a debug UART using the serial_pic32 driver. You + will need to provide parameters to make this work. The driver will + be available until the real driver model serial is running. + endchoice config DEBUG_UART_BASE @@ -241,6 +249,13 @@ config FSL_LPUART Select this to enable a Low Power UART for Freescale VF610 and QorIQ Layerscape devices. +config PIC32_SERIAL + bool "Support for Microchip PIC32 on-chip UART" + depends on DM_SERIAL && MACH_PIC32 + default y + help + Support for the UART found on Microchip PIC32 SoC's. + config SYS_NS16550 bool "NS16550 UART or compatible" help diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index dd87147..57cd38b 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_MXS_AUART) += mxs_auart.o obj-$(CONFIG_ARC_SERIAL) += serial_arc.o obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o obj-$(CONFIG_STM32_SERIAL) += serial_stm32.o +obj-$(CONFIG_PIC32_SERIAL) += serial_pic32.o ifndef CONFIG_SPL_BUILD obj-$(CONFIG_USB_TTY) += usbtty.o diff --git a/drivers/serial/serial_pic32.c b/drivers/serial/serial_pic32.c new file mode 100644 index 0000000..af9fbbf --- /dev/null +++ b/drivers/serial/serial_pic32.c @@ -0,0 +1,198 @@ +/* + * (c) 2015 Paul Thacker <paul.thacker@microchip.com> + * + * SPDX-License-Identifier: GPL-2.0+ + * + */ +#include <common.h> +#include <clk.h> +#include <dm.h> +#include <serial.h> +#include <wait_bit.h> +#include <mach/pic32.h> +#include <dt-bindings/clock/microchip,clock.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* UART Control Registers */ +#define U_MOD 0x00 +#define U_MODCLR (U_MOD + _CLR_OFFSET) +#define U_MODSET (U_MOD + _SET_OFFSET) +#define U_STA 0x10 +#define U_STACLR (U_STA + _CLR_OFFSET) +#define U_STASET (U_STA + _SET_OFFSET) +#define U_TXR 0x20 +#define U_RXR 0x30 +#define U_BRG 0x40 + +/* U_MOD bits */ +#define UART_ENABLE BIT(15) + +/* U_STA bits */ +#define UART_RX_ENABLE BIT(12) +#define UART_TX_BRK BIT(11) +#define UART_TX_ENABLE BIT(10) +#define UART_TX_FULL BIT(9) +#define UART_TX_EMPTY BIT(8) +#define UART_RX_OVER BIT(1) +#define UART_RX_DATA_AVAIL BIT(0) + +struct pic32_uart_priv { + void __iomem *base; + ulong uartclk; +}; + +/* + * Initialize the serial port with the given baudrate. + * The settings are always 8 data bits, no parity, 1 stop bit, no start bits. + */ +static int pic32_serial_init(void __iomem *base, ulong clk, u32 baudrate) +{ + u32 div = DIV_ROUND_CLOSEST(clk, baudrate * 16); + + /* wait for TX FIFO to empty */ + wait_for_bit(__func__, base + U_STA, UART_TX_EMPTY, + true, CONFIG_SYS_HZ, false); + + /* send break */ + writel(UART_TX_BRK, base + U_STASET); + + /* disable and clear mode */ + writel(0, base + U_MOD); + writel(0, base + U_STA); + + /* set baud rate generator */ + writel(div - 1, base + U_BRG); + + /* enable the UART for TX and RX */ + writel(UART_TX_ENABLE | UART_RX_ENABLE, base + U_STASET); + + /* enable the UART */ + writel(UART_ENABLE, base + U_MODSET); + return 0; +} + +/* Check whether any char pending in RX fifo */ +static int pic32_uart_pending_input(void __iomem *base) +{ + /* check if rx buffer overrun error has occurred */ + if (readl(base + U_STA) & UART_RX_OVER) { + readl(base + U_RXR); + + /* clear overrun error to keep receiving */ + writel(UART_RX_OVER, base + U_STACLR); + } + + /* In PIC32 there is no way to know number of outstanding + * chars in rx-fifo. Only it can be known whether there is any. + */ + return readl(base + U_STA) & UART_RX_DATA_AVAIL; +} + +static int pic32_uart_pending(struct udevice *dev, bool input) +{ + struct pic32_uart_priv *priv = dev_get_priv(dev); + + if (input) + return pic32_uart_pending_input(priv->base); + + return !(readl(priv->base + U_STA) & UART_TX_EMPTY); +} + +static int pic32_uart_setbrg(struct udevice *dev, int baudrate) +{ + struct pic32_uart_priv *priv = dev_get_priv(dev); + + return pic32_serial_init(priv->base, priv->uartclk, baudrate); +} + +static int pic32_uart_putc(struct udevice *dev, const char ch) +{ + struct pic32_uart_priv *priv = dev_get_priv(dev); + + /* Check if Tx FIFO is full */ + if (readl(priv->base + U_STA) & UART_TX_FULL) + return -EAGAIN; + + /* pump the char to tx buffer */ + writel(ch, priv->base + U_TXR); + + return 0; +} + +static int pic32_uart_getc(struct udevice *dev) +{ + struct pic32_uart_priv *priv = dev_get_priv(dev); + + /* return error if RX fifo is empty */ + if (!pic32_uart_pending_input(priv->base)) + return -EAGAIN; + + /* read the character from rx buffer */ + return readl(priv->base + U_RXR) & 0xff; +} + +static int pic32_uart_probe(struct udevice *dev) +{ + struct pic32_uart_priv *priv = dev_get_priv(dev); + struct udevice *clkdev; + fdt_addr_t addr; + fdt_size_t size; + int ret; + + /* get address */ + addr = fdtdec_get_addr_size(gd->fdt_blob, dev->of_offset, "reg", &size); + if (addr == FDT_ADDR_T_NONE) + return -EINVAL; + + priv->base = ioremap(addr, size); + + /* get clock rate */ + ret = clk_get_by_index(dev, 0, &clkdev); + if (ret < 0) + return ret; + priv->uartclk = clk_get_periph_rate(clkdev, ret); + + /* initialize serial */ + return pic32_serial_init(priv->base, priv->uartclk, CONFIG_BAUDRATE); +} + +static const struct dm_serial_ops pic32_uart_ops = { + .putc = pic32_uart_putc, + .pending = pic32_uart_pending, + .getc = pic32_uart_getc, + .setbrg = pic32_uart_setbrg, +}; + +static const struct udevice_id pic32_uart_ids[] = { + { .compatible = "microchip,pic32mzda-uart" }, + {} +}; + +U_BOOT_DRIVER(pic32_serial) = { + .name = "pic32-uart", + .id = UCLASS_SERIAL, + .of_match = pic32_uart_ids, + .probe = pic32_uart_probe, + .ops = &pic32_uart_ops, + .flags = DM_FLAG_PRE_RELOC, + .priv_auto_alloc_size = sizeof(struct pic32_uart_priv), +}; + +#ifdef CONFIG_DEBUG_UART_PIC32 +#include <debug_uart.h> + +static inline void _debug_uart_init(void) +{ + void __iomem *base = (void __iomem *)CONFIG_DEBUG_UART_BASE; + + pic32_serial_init(base, CONFIG_DEBUG_UART_CLOCK, CONFIG_BAUDRATE); +} + +static inline void _debug_uart_putc(int ch) +{ + writel(ch, CONFIG_DEBUG_UART_BASE + U_TXR); +} + +DEBUG_UART_FUNCS +#endif |