diff options
| -rw-r--r-- | arch/arm/include/asm/arch-ls102xa/config.h | 8 | ||||
| -rw-r--r-- | arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h | 5 | ||||
| -rw-r--r-- | arch/arm/include/asm/global_data.h | 8 | ||||
| -rw-r--r-- | arch/powerpc/cpu/mpc85xx/cmd_errata.c | 5 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/config_mpc85xx.h | 1 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/fsl_errata.h | 55 | ||||
| -rw-r--r-- | board/freescale/common/sys_eeprom.c | 4 | ||||
| -rw-r--r-- | board/freescale/ls1021aqds/ls1021aqds.c | 18 | ||||
| -rw-r--r-- | board/freescale/ls1021atwr/ls1021atwr.c | 23 | ||||
| -rw-r--r-- | drivers/Makefile | 1 | ||||
| -rw-r--r-- | drivers/qe/Makefile | 3 | ||||
| -rw-r--r-- | drivers/qe/fdt.c | 2 | ||||
| -rw-r--r-- | drivers/qe/qe.c | 140 | ||||
| -rw-r--r-- | drivers/qe/qe.h | 5 | ||||
| -rw-r--r-- | drivers/usb/host/ehci-fsl.c | 5 | ||||
| -rw-r--r-- | include/configs/ls1021aqds.h | 25 | ||||
| -rw-r--r-- | include/configs/ls1021atwr.h | 18 | ||||
| -rw-r--r-- | include/fsl_usb.h | 77 | ||||
| -rw-r--r-- | include/usb/ehci-fsl.h | 3 |
19 files changed, 335 insertions, 71 deletions
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h index f2c9687..ba86eea 100644 --- a/arch/arm/include/asm/arch-ls102xa/config.h +++ b/arch/arm/include/asm/arch-ls102xa/config.h @@ -27,7 +27,10 @@ #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011c0500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011d0500) #define CONFIG_SYS_DCU_ADDR (CONFIG_SYS_IMMR + 0x01ce0000) +#define CONFIG_SYS_LS102XA_USB1_ADDR \ + (CONFIG_SYS_IMMR + CONFIG_SYS_LS102XA_USB1_OFFSET) +#define CONFIG_SYS_LS102XA_USB1_OFFSET 0x07600000 #define CONFIG_SYS_TSEC1_OFFSET 0x01d10000 #define CONFIG_SYS_TSEC2_OFFSET 0x01d50000 #define CONFIG_SYS_TSEC3_OFFSET 0x01d90000 @@ -72,6 +75,10 @@ #define DCU_LAYER_MAX_NUM 16 +#define QE_MURAM_SIZE 0x6000UL +#define MAX_QE_RISC 1 +#define QE_NUM_OF_SNUM 28 + #define CONFIG_SYS_FSL_SRDS_1 #ifdef CONFIG_LS102XA @@ -80,6 +87,7 @@ #define CONFIG_NUM_DDR_CONTROLLERS 1 #define CONFIG_SYS_FSL_DDR_VER FSL_DDR_VER_5_0 #define CONFIG_SYS_FSL_SEC_COMPAT 5 +#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 #else #error SoC not defined #endif diff --git a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h index 7995fe2..b0c267c 100644 --- a/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h +++ b/arch/arm/include/asm/arch-ls102xa/immap_ls102xa.h @@ -95,8 +95,6 @@ struct ccsr_gur { u32 sdhcpcr; }; -#define SCFG_SCFGREVCR_REV 0xffffffff -#define SCFG_SCFGREVCR_NOREV 0 #define SCFG_ETSECDMAMCR_LE_BD_FR 0xf8001a0f #define SCFG_ETSECCMCR_GE2_CLK125 0x04000000 #define SCFG_PIXCLKCR_PXCKEN 0x80000000 @@ -182,7 +180,7 @@ struct ccsr_scfg { u32 etsecmcr; u32 sdhciovserlcr; u32 resv14[61]; - u32 sparecr; + u32 sparecr[8]; }; /* Clocking */ @@ -448,6 +446,7 @@ struct ccsr_ddr { #define CCI400_CTRLORD_TERM_BARRIER 0x00000008 #define CCI400_CTRLORD_EN_BARRIER 0 +#define CCI400_SHAORD_NON_SHAREABLE 0x00000002 /* CCI-400 registers */ struct ccsr_cci400 { diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h index c69d064..438f128 100644 --- a/arch/arm/include/asm/global_data.h +++ b/arch/arm/include/asm/global_data.h @@ -17,6 +17,14 @@ struct arch_global_data { #if defined(CONFIG_FSL_ESDHC) u32 sdhc_clk; #endif + +#if defined(CONFIG_U_QE) + u32 qe_clk; + u32 brg_clk; + uint mp_alloc_base; + uint mp_alloc_top; +#endif /* CONFIG_U_QE */ + #ifdef CONFIG_AT91FAMILY /* "static data" needed by at91's clock.c */ unsigned long cpu_clk_rate_hz; diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c index 3a04a89..fe3eb06 100644 --- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c +++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c @@ -9,6 +9,7 @@ #include <linux/compiler.h> #include <asm/fsl_errata.h> #include <asm/processor.h> +#include <fsl_usb.h> #include "fsl_corenet_serdes.h" #ifdef CONFIG_SYS_FSL_ERRATUM_A004849 @@ -293,6 +294,10 @@ static int do_errata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) if (has_erratum_a007075()) puts("Work-around for Erratum A007075 enabled\n"); #endif +#ifdef CONFIG_SYS_FSL_ERRATUM_A007798 + if (has_erratum_a007798()) + puts("Work-around for Erratum A007798 enabled\n"); +#endif #ifdef CONFIG_SYS_FSL_ERRATUM_I2C_A004447 if ((SVR_SOC_VER(svr) == SVR_8548 && IS_SVR_REV(svr, 3, 1)) || (SVR_REV(svr) <= CONFIG_SYS_FSL_A004447_SVR_REV)) diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h index 4c1774f..7860b40 100644 --- a/arch/powerpc/include/asm/config_mpc85xx.h +++ b/arch/powerpc/include/asm/config_mpc85xx.h @@ -678,6 +678,7 @@ #define CONFIG_SYS_FSL_ERRATUM_A006379 #define CONFIG_SYS_FSL_ERRATUM_A007186 #define CONFIG_SYS_FSL_ERRATUM_A006593 +#define CONFIG_SYS_FSL_ERRATUM_A007798 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 #define CONFIG_SYS_FSL_SFP_VER_3_0 #define CONFIG_SYS_FSL_PCI_VER_3_X diff --git a/arch/powerpc/include/asm/fsl_errata.h b/arch/powerpc/include/asm/fsl_errata.h index 64da4bb..b9e2fb0 100644 --- a/arch/powerpc/include/asm/fsl_errata.h +++ b/arch/powerpc/include/asm/fsl_errata.h @@ -26,59 +26,4 @@ static inline bool has_erratum_a006379(void) return false; } #endif - -#ifdef CONFIG_SYS_FSL_ERRATUM_A006261 -static inline bool has_erratum_a006261(void) -{ - u32 svr = get_svr(); - u32 soc = SVR_SOC_VER(svr); - - switch (soc) { - case SVR_P1010: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_P2041: - case SVR_P2040: - return IS_SVR_REV(svr, 1, 0) || - IS_SVR_REV(svr, 1, 1) || IS_SVR_REV(svr, 2, 1); - case SVR_P3041: - return IS_SVR_REV(svr, 1, 0) || - IS_SVR_REV(svr, 1, 1) || - IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 2, 1); - case SVR_P5010: - case SVR_P5020: - case SVR_P5021: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_T4240: - case SVR_T4160: - case SVR_T4080: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_T1040: - return IS_SVR_REV(svr, 1, 0); - case SVR_T2080: - case SVR_T2081: - return IS_SVR_REV(svr, 1, 0); - case SVR_P5040: - return IS_SVR_REV(svr, 1, 0); - } - - return false; -} -#endif - -static inline bool has_erratum_a007075(void) -{ - u32 svr = get_svr(); - u32 soc = SVR_SOC_VER(svr); - - switch (soc) { - case SVR_B4860: - case SVR_B4420: - return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); - case SVR_P1010: - return IS_SVR_REV(svr, 1, 0); - case SVR_P4080: - return IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 3, 0); - } - return false; -} #endif diff --git a/board/freescale/common/sys_eeprom.c b/board/freescale/common/sys_eeprom.c index c9c8eaa..5cb7570 100644 --- a/board/freescale/common/sys_eeprom.c +++ b/board/freescale/common/sys_eeprom.c @@ -90,7 +90,7 @@ static void show_eeprom(void) /* EEPROM tag ID, either CCID or NXID */ #ifdef CONFIG_SYS_I2C_EEPROM_NXID printf("ID: %c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], - be32_to_cpu(e.version)); + e.version); #else printf("ID: %c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]); #endif @@ -485,7 +485,7 @@ int mac_read_from_eeprom(void) #ifdef CONFIG_SYS_I2C_EEPROM_NXID printf("%c%c%c%c v%u\n", e.id[0], e.id[1], e.id[2], e.id[3], - be32_to_cpu(e.version)); + e.version); #else printf("%c%c%c%c\n", e.id[0], e.id[1], e.id[2], e.id[3]); #endif diff --git a/board/freescale/ls1021aqds/ls1021aqds.c b/board/freescale/ls1021aqds/ls1021aqds.c index 7441a6b..0a7720a 100644 --- a/board/freescale/ls1021aqds/ls1021aqds.c +++ b/board/freescale/ls1021aqds/ls1021aqds.c @@ -17,6 +17,9 @@ #include "../common/qixis.h" #include "ls1021aqds_qixis.h" +#ifdef CONFIG_U_QE +#include "../../../drivers/qe/qe.h" +#endif DECLARE_GLOBAL_DATA_PTR; @@ -137,9 +140,8 @@ int board_early_init_f(void) struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; #ifdef CONFIG_TSEC_ENET - out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_REV); out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR); - out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_NOREV); + out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125); #endif #ifdef CONFIG_FSL_IFC @@ -230,6 +232,13 @@ int board_init(void) /* Set CCI-400 control override register to * enable barrier transaction */ out_le32(&cci->ctrl_ord, CCI400_CTRLORD_EN_BARRIER); + /* + * Set CCI-400 Slave interface S0, S1, S2 Shareable Override Register + * All transactions are treated as non-shareable + */ + out_le32(&cci->slave[0].sha_ord, CCI400_SHAORD_NON_SHAREABLE); + out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE); + out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE); select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT); @@ -237,6 +246,11 @@ int board_init(void) fsl_serdes_init(); config_serdes_mux(); #endif + +#ifdef CONFIG_U_QE + u_qe_init(); +#endif + return 0; } diff --git a/board/freescale/ls1021atwr/ls1021atwr.c b/board/freescale/ls1021atwr/ls1021atwr.c index ee78769..3e8c37b 100644 --- a/board/freescale/ls1021atwr/ls1021atwr.c +++ b/board/freescale/ls1021atwr/ls1021atwr.c @@ -17,6 +17,10 @@ #include <fsl_mdio.h> #include <tsec.h> #include <fsl_sec.h> +#ifdef CONFIG_U_QE +#include "../../../drivers/qe/qe.h" +#endif + DECLARE_GLOBAL_DATA_PTR; @@ -251,11 +255,8 @@ int board_early_init_f(void) struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR; #ifdef CONFIG_TSEC_ENET - out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_REV); out_be32(&scfg->etsecdmamcr, SCFG_ETSECDMAMCR_LE_BD_FR); out_be32(&scfg->etsecmcr, SCFG_ETSECCMCR_GE2_CLK125); - udelay(10); - out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_NOREV); #endif #ifdef CONFIG_FSL_IFC @@ -263,9 +264,7 @@ int board_early_init_f(void) #endif #ifdef CONFIG_FSL_DCU_FB - out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_REV); out_be32(&scfg->pixclkcr, SCFG_PIXCLKCR_PXCKEN); - out_be32(&scfg->scfgrevcr, SCFG_SCFGREVCR_NOREV); #endif return 0; @@ -273,11 +272,25 @@ int board_early_init_f(void) int board_init(void) { + struct ccsr_cci400 *cci = (struct ccsr_cci400 *)CONFIG_SYS_CCI400_ADDR; + + /* + * Set CCI-400 Slave interface S0, S1, S2 Shareable Override Register + * All transactions are treated as non-shareable + */ + out_le32(&cci->slave[0].sha_ord, CCI400_SHAORD_NON_SHAREABLE); + out_le32(&cci->slave[1].sha_ord, CCI400_SHAORD_NON_SHAREABLE); + out_le32(&cci->slave[2].sha_ord, CCI400_SHAORD_NON_SHAREABLE); + #ifndef CONFIG_SYS_FSL_NO_SERDES fsl_serdes_init(); config_serdes_mux(); #endif +#ifdef CONFIG_U_QE + u_qe_init(); +#endif + return 0; } diff --git a/drivers/Makefile b/drivers/Makefile index 7683c61..5ef58c0 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -16,6 +16,7 @@ obj-y += twserial/ obj-y += video/ obj-y += watchdog/ obj-$(CONFIG_QE) += qe/ +obj-$(CONFIG_U_QE) += qe/ obj-y += memory/ obj-y += pwm/ obj-y += input/ diff --git a/drivers/qe/Makefile b/drivers/qe/Makefile index 7f1bd06..8fa4866 100644 --- a/drivers/qe/Makefile +++ b/drivers/qe/Makefile @@ -4,5 +4,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -obj-y := qe.o uccf.o uec.o uec_phy.o +obj-$(CONFIG_QE) += qe.o uccf.o uec.o uec_phy.o +obj-$(CONFIG_U_QE) += qe.o obj-$(CONFIG_OF_LIBFDT) += fdt.o diff --git a/drivers/qe/fdt.c b/drivers/qe/fdt.c index d9a7d82..dfae4bf 100644 --- a/drivers/qe/fdt.c +++ b/drivers/qe/fdt.c @@ -12,6 +12,7 @@ #include <fdt_support.h> #include "qe.h" +#ifdef CONFIG_QE DECLARE_GLOBAL_DATA_PTR; /* @@ -72,3 +73,4 @@ void ft_qe_setup(void *blob) "clock-frequency", gd->arch.qe_clk / 2, 1); fdt_fixup_qe_firmware(blob); } +#endif diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c index 4358a91..bc94673 100644 --- a/drivers/qe/qe.c +++ b/drivers/qe/qe.c @@ -40,6 +40,7 @@ void qe_issue_cmd(uint cmd, uint sbc, u8 mcn, u32 cmd_data) return; } +#ifdef CONFIG_QE uint qe_muram_alloc(uint size, uint align) { uint retloc; @@ -70,6 +71,7 @@ uint qe_muram_alloc(uint size, uint align) return retloc; } +#endif void *qe_muram_addr(uint offset) { @@ -180,6 +182,17 @@ void qe_init(uint qe_base) qe_snums_init(); } +#ifdef CONFIG_U_QE +void u_qe_init(void) +{ + uint qe_base = CONFIG_SYS_IMMR + 0x01400000; /* QE immr base */ + qe_immr = (qe_map_t *)qe_base; + + u_qe_upload_firmware((const void *)CONFIG_SYS_QE_FW_ADDR); + out_be32(&qe_immr->iram.iready, QE_IRAM_READY); +} +#endif + void qe_reset(void) { qe_issue_cmd(QE_RESET, QE_CR_SUBBLOCK_INVALID, @@ -212,6 +225,7 @@ void qe_assign_page(uint snum, uint para_ram_base) #define BRG_CLK (gd->arch.brg_clk) +#ifdef CONFIG_QE int qe_set_brg(uint brg, uint rate) { volatile uint *bp; @@ -239,6 +253,7 @@ int qe_set_brg(uint brg, uint rate) return 0; } +#endif /* Set ethernet MII clock master */ @@ -429,6 +444,131 @@ int qe_upload_firmware(const struct qe_firmware *firmware) return 0; } +#ifdef CONFIG_U_QE +/* + * Upload a microcode to the I-RAM at a specific address. + * + * See docs/README.qe_firmware for information on QE microcode uploading. + * + * Currently, only version 1 is supported, so the 'version' field must be + * set to 1. + * + * The SOC model and revision are not validated, they are only displayed for + * informational purposes. + * + * 'calc_size' is the calculated size, in bytes, of the firmware structure and + * all of the microcode structures, minus the CRC. + * + * 'length' is the size that the structure says it is, including the CRC. + */ +int u_qe_upload_firmware(const struct qe_firmware *firmware) +{ + unsigned int i; + unsigned int j; + u32 crc; + size_t calc_size = sizeof(struct qe_firmware); + size_t length; + const struct qe_header *hdr; +#ifdef CONFIG_DEEP_SLEEP + ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); +#endif + if (!firmware) { + printf("Invalid address\n"); + return -EINVAL; + } + + hdr = &firmware->header; + length = be32_to_cpu(hdr->length); + + /* Check the magic */ + if ((hdr->magic[0] != 'Q') || (hdr->magic[1] != 'E') || + (hdr->magic[2] != 'F')) { + printf("Not a microcode\n"); +#ifdef CONFIG_DEEP_SLEEP + setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_QE_DISABLE); +#endif + return -EPERM; + } + + /* Check the version */ + if (hdr->version != 1) { + printf("Unsupported version\n"); + return -EPERM; + } + + /* Validate some of the fields */ + if ((firmware->count < 1) || (firmware->count > MAX_QE_RISC)) { + printf("Invalid data\n"); + return -EINVAL; + } + + /* Validate the length and check if there's a CRC */ + calc_size += (firmware->count - 1) * sizeof(struct qe_microcode); + + for (i = 0; i < firmware->count; i++) + /* + * For situations where the second RISC uses the same microcode + * as the first, the 'code_offset' and 'count' fields will be + * zero, so it's okay to add those. + */ + calc_size += sizeof(u32) * + be32_to_cpu(firmware->microcode[i].count); + + /* Validate the length */ + if (length != calc_size + sizeof(u32)) { + printf("Invalid length\n"); + return -EPERM; + } + + /* + * Validate the CRC. We would normally call crc32_no_comp(), but that + * function isn't available unless you turn on JFFS support. + */ + crc = be32_to_cpu(*(u32 *)((void *)firmware + calc_size)); + if (crc != (crc32(-1, (const void *)firmware, calc_size) ^ -1)) { + printf("Firmware CRC is invalid\n"); + return -EIO; + } + + /* + * If the microcode calls for it, split the I-RAM. + */ + if (!firmware->split) { + out_be16(&qe_immr->cp.cercr, + in_be16(&qe_immr->cp.cercr) | QE_CP_CERCR_CIR); + } + + if (firmware->soc.model) + printf("Firmware '%s' for %u V%u.%u\n", + firmware->id, be16_to_cpu(firmware->soc.model), + firmware->soc.major, firmware->soc.minor); + else + printf("Firmware '%s'\n", firmware->id); + + /* Loop through each microcode. */ + for (i = 0; i < firmware->count; i++) { + const struct qe_microcode *ucode = &firmware->microcode[i]; + + /* Upload a microcode if it's present */ + if (ucode->code_offset) + qe_upload_microcode(firmware, ucode); + + /* Program the traps for this processor */ + for (j = 0; j < 16; j++) { + u32 trap = be32_to_cpu(ucode->traps[j]); + + if (trap) + out_be32(&qe_immr->rsp[i].tibcr[j], trap); + } + + /* Enable traps */ + out_be32(&qe_immr->rsp[i].eccr, be32_to_cpu(ucode->eccr)); + } + + return 0; +} +#endif + struct qe_firmware_info *qe_get_firmware_info(void) { return qe_firmware_uploaded ? &qe_firmware_info : NULL; diff --git a/drivers/qe/qe.h b/drivers/qe/qe.h index ebb7c5f..33878f8 100644 --- a/drivers/qe/qe.h +++ b/drivers/qe/qe.h @@ -285,4 +285,9 @@ void ft_qe_setup(void *blob); void qe_init(uint qe_base); void qe_reset(void); +#ifdef CONFIG_U_QE +void u_qe_init(void); +int u_qe_upload_firmware(const struct qe_firmware *firmware); +#endif + #endif /* __QE_H__ */ diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 45062e6..8f55464 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -14,7 +14,7 @@ #include <asm/io.h> #include <usb/ehci-fsl.h> #include <hwconfig.h> -#include <asm/fsl_errata.h> +#include <fsl_usb.h> #include "ehci.h" @@ -130,8 +130,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, in_le32(&ehci->usbmode); - if (SVR_SOC_VER(get_svr()) == SVR_T4240 && - IS_SVR_REV(get_svr(), 2, 0)) + if (has_erratum_a007798()) set_txfifothresh(ehci, TXFIFOTHRESH); return 0; diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index b19a60f..48e10ec 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -70,6 +70,11 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_HAS_SERDES #define CONFIG_FSL_CAAM /* Enable CAAM */ + +#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI) +#define CONFIG_U_QE +#endif + /* * IFC Definitions */ @@ -110,6 +115,7 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_FLASH_QUIET_TEST #define CONFIG_FLASH_SHOW_PROGRESS 45 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS +#define CONFIG_SYS_WRITE_SWAPPED_DATA #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ @@ -274,6 +280,23 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_GENERIC_MMC /* + * USB + */ +#define CONFIG_HAS_FSL_DR_USB + +#ifdef CONFIG_HAS_FSL_DR_USB +#define CONFIG_USB_EHCI + +#ifdef CONFIG_USB_EHCI +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI_FSL +#define CONFIG_EHCI_HCD_INIT_AFTER_RESET +#define CONFIG_CMD_EXT2 +#endif +#endif + +/* * eTSEC */ #define CONFIG_TSEC_ENET @@ -332,6 +355,8 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_BOOTDELAY 3 +#define CONFIG_SYS_QE_FW_ADDR 0x67f40000 + #define CONFIG_EXTRA_ENV_SETTINGS \ "bootargs=root=/dev/ram0 rw console=ttyS0,115200\0" \ "fdt_high=0xcfffffff\0" \ diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index e98e102..3eac7ee 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -50,6 +50,10 @@ #define CONFIG_FSL_CAAM /* Enable CAAM */ +#if !defined(CONFIG_SDCARD) && !defined(CONFIG_NAND) && !defined(CONFIG_SPI) +#define CONFIG_U_QE +#endif + /* * IFC Definitions */ @@ -95,6 +99,7 @@ #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE_PHYS } #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS +#define CONFIG_SYS_WRITE_SWAPPED_DATA /* CPLD */ @@ -156,6 +161,17 @@ #define CONFIG_SYS_I2C #define CONFIG_SYS_I2C_MXC +/* EEPROM */ +#ifndef CONFIG_SD_BOOT +#define CONFIG_ID_EEPROM +#define CONFIG_SYS_I2C_EEPROM_NXID +#define CONFIG_SYS_EEPROM_BUS_NUM 1 +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 +#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 +#endif + /* * MMC */ @@ -274,6 +290,8 @@ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ +#define CONFIG_SYS_QE_FW_ADDR 0x67f40000 + /* * Environment */ diff --git a/include/fsl_usb.h b/include/fsl_usb.h index 1a6c9c1..e4902aa 100644 --- a/include/fsl_usb.h +++ b/include/fsl_usb.h @@ -85,4 +85,81 @@ struct ccsr_usb_phy { #define CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK 0x07 #endif +/* USB Erratum Checking code */ +#ifdef CONFIG_PPC +static inline bool has_erratum_a006261(void) +{ + u32 svr = get_svr(); + u32 soc = SVR_SOC_VER(svr); + + switch (soc) { + case SVR_P1010: + return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); + case SVR_P2041: + case SVR_P2040: + return IS_SVR_REV(svr, 1, 0) || + IS_SVR_REV(svr, 1, 1) || IS_SVR_REV(svr, 2, 1); + case SVR_P3041: + return IS_SVR_REV(svr, 1, 0) || + IS_SVR_REV(svr, 1, 1) || + IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 2, 1); + case SVR_P5010: + case SVR_P5020: + case SVR_P5021: + return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); + case SVR_T4240: + case SVR_T4160: + case SVR_T4080: + return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); + case SVR_T1040: + return IS_SVR_REV(svr, 1, 0); + case SVR_T2080: + case SVR_T2081: + return IS_SVR_REV(svr, 1, 0); + case SVR_P5040: + return IS_SVR_REV(svr, 1, 0); + } + + return false; +} + +static inline bool has_erratum_a007075(void) +{ + u32 svr = get_svr(); + u32 soc = SVR_SOC_VER(svr); + + switch (soc) { + case SVR_B4860: + case SVR_B4420: + return IS_SVR_REV(svr, 1, 0) || IS_SVR_REV(svr, 2, 0); + case SVR_P1010: + return IS_SVR_REV(svr, 1, 0); + case SVR_P4080: + return IS_SVR_REV(svr, 2, 0) || IS_SVR_REV(svr, 3, 0); + } + return false; +} + +static inline bool has_erratum_a007798(void) +{ + return SVR_SOC_VER(get_svr()) == SVR_T4240 && + IS_SVR_REV(get_svr(), 2, 0); +} +#else +static inline bool has_erratum_a006261(void) +{ + return false; +} + +static inline bool has_erratum_a007075(void) +{ + return false; +} + +static inline bool has_erratum_a007798(void) +{ + return false; +} + +#endif #endif /*_ASM_FSL_USB_H_ */ diff --git a/include/usb/ehci-fsl.h b/include/usb/ehci-fsl.h index dd77ad6..897018b 100644 --- a/include/usb/ehci-fsl.h +++ b/include/usb/ehci-fsl.h @@ -163,6 +163,9 @@ #elif defined(CONFIG_MPC512X) #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC512x_USB1_ADDR #define CONFIG_SYS_FSL_USB2_ADDR 0 +#elif defined(CONFIG_LS102XA) +#define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_LS102XA_USB1_ADDR +#define CONFIG_SYS_FSL_USB2_ADDR 0 #endif /* |