diff options
48 files changed, 57 insertions, 57 deletions
diff --git a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c b/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c index b4dc4a6..bd6a5b1 100644 --- a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c +++ b/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c @@ -148,7 +148,7 @@ unsigned char mmc_read_sector (unsigned long addr,unsigned char *Buffer) /* Command 16 to read aBlocks from the MMC/SD - caed */ unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF}; - /* The addres on the MMC/SD-card is in bytes, + /* The address on the MMC/SD-card is in bytes, addr is transformed from blocks to bytes and the result is placed into the command */ @@ -173,7 +173,7 @@ unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer) /* Command 24 to write a block to the MMC/SD - card */ unsigned char CMD[] = {0x58, 0x00, 0x00, 0x00, 0x00, 0xFF}; - /* The addres on the MMC/SD-card is in bytes, + /* The address on the MMC/SD-card is in bytes, addr is transformed from blocks to bytes and the result is placed into the command */ diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S index 091b7d8..ecb92ef 100644 --- a/arch/arm/cpu/arm720t/start.S +++ b/arch/arm/cpu/arm720t/start.S @@ -274,7 +274,7 @@ _dynsym_start_ofs: #if defined(CONFIG_IMPA7) || defined(CONFIG_EP7312) || defined(CONFIG_ARMADILLO) -/* Interupt-Controller base addresses */ +/* Interrupt-Controller base addresses */ INTMR1: .word 0x80000280 @ 32 bit size INTMR2: .word 0x80001280 @ 16 bit size INTMR3: .word 0x80002280 @ 8 bit size diff --git a/arch/arm/cpu/arm920t/at91/timer.c b/arch/arm/cpu/arm920t/at91/timer.c index c321e28..91607b5 100644 --- a/arch/arm/cpu/arm920t/at91/timer.c +++ b/arch/arm/cpu/arm920t/at91/timer.c @@ -59,7 +59,7 @@ int timer_init(void) when the value in TC_RC is reached */ writel(AT91_TC_CMR_TCCLKS_CLOCK1 | AT91_TC_CMR_CPCTRG, &tc->tc[0].cmr); - writel(0xFFFFFFFF, &tc->tc[0].idr); /* disable interupts */ + writel(0xFFFFFFFF, &tc->tc[0].idr); /* disable interrupts */ writel(TIMER_LOAD_VAL, &tc->tc[0].rc); writel(AT91_TC_CCR_SWTRG | AT91_TC_CCR_CLKEN, &tc->tc[0].ccr); diff --git a/arch/arm/cpu/arm920t/start.S b/arch/arm/cpu/arm920t/start.S index 2a53667..0090f89 100644 --- a/arch/arm/cpu/arm920t/start.S +++ b/arch/arm/cpu/arm920t/start.S @@ -142,11 +142,11 @@ copyex: # if defined(CONFIG_S3C2400) # define pWTCON 0x15300000 -# define INTMSK 0x14400008 /* Interupt-Controller base addresses */ +# define INTMSK 0x14400008 /* Interrupt-Controller base addresses */ # define CLKDIVN 0x14800014 /* clock divisor register */ #else # define pWTCON 0x53000000 -# define INTMSK 0x4A000008 /* Interupt-Controller base addresses */ +# define INTMSK 0x4A000008 /* Interrupt-Controller base addresses */ # define INTSUBMSK 0x4A00001C # define CLKDIVN 0x4C000014 /* clock divisor register */ # endif diff --git a/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c b/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c index 09f69ce..642e67a 100644 --- a/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c +++ b/arch/arm/cpu/ixp/npe/IxQMgrDispatcher.c @@ -386,7 +386,7 @@ ixQMgrNotificationEnable (IxQMgrQId qId, &dispatchQInfo[qId].statusMask); - /* Set the interupt source is this queue is in the range 0-31 */ + /* Set the interrupt source is this queue is in the range 0-31 */ if (qId < IX_QMGR_MIN_QUEUPP_QID) { ixQMgrAqmIfIntSrcSelWrite (qId, srcSel); diff --git a/arch/arm/cpu/ixp/npe/include/IxEthAcc_p.h b/arch/arm/cpu/ixp/npe/include/IxEthAcc_p.h index 0ee4123..4e0de82 100644 --- a/arch/arm/cpu/ixp/npe/include/IxEthAcc_p.h +++ b/arch/arm/cpu/ixp/npe/include/IxEthAcc_p.h @@ -279,7 +279,7 @@ typedef struct BOOL portInitialized; UINT32 npeId; /**< NpeId for this port */ IxEthAccTxDataInfo ixEthAccTxData; /**< Transmit data control structures */ - IxEthAccRxDataInfo ixEthAccRxData; /**< Recieve data control structures */ + IxEthAccRxDataInfo ixEthAccRxData; /**< Receive data control structures */ } IxEthAccPortDataInfo; extern IxEthAccPortDataInfo ixEthAccPortData[]; diff --git a/arch/arm/cpu/ixp/npe/include/IxNpeA.h b/arch/arm/cpu/ixp/npe/include/IxNpeA.h index 7427cc4..90669c2 100644 --- a/arch/arm/cpu/ixp/npe/include/IxNpeA.h +++ b/arch/arm/cpu/ixp/npe/include/IxNpeA.h @@ -717,7 +717,7 @@ typedef struct */ typedef struct { - UINT32 rxBitField; /**< Recieved bit field */ + UINT32 rxBitField; /**< Received bit field */ UINT32 atmCellHeader; /**< ATM Cell Header */ UINT32 rsvdWord0; /**< Reserved field */ UINT16 currMbufLen; /**< Mbuf Length */ diff --git a/arch/arm/cpu/ixp/npe/include/IxQMgr.h b/arch/arm/cpu/ixp/npe/include/IxQMgr.h index 165ed96..03d7e07 100644 --- a/arch/arm/cpu/ixp/npe/include/IxQMgr.h +++ b/arch/arm/cpu/ixp/npe/include/IxQMgr.h @@ -570,7 +570,7 @@ typedef enum * @brief Queue interrupt source select. * * This enum defines the different source conditions on a queue that result in - * an interupt being fired by the AQM. Interrupt source is configurable for + * an interrupt being fired by the AQM. Interrupt source is configurable for * queues 0-31 only. The interrupt source for queues 32-63 is hardwired to the * NE(Nearly Empty) status flag. * diff --git a/arch/arm/cpu/ixp/npe/include/IxQueueAssignments.h b/arch/arm/cpu/ixp/npe/include/IxQueueAssignments.h index f7194e7..b65d621 100644 --- a/arch/arm/cpu/ixp/npe/include/IxQueueAssignments.h +++ b/arch/arm/cpu/ixp/npe/include/IxQueueAssignments.h @@ -404,7 +404,7 @@ * * @def IX_ETH_ACC_RX_FRAME_ETH_Q * -* @brief Eth0/Eth1 NPE Frame Recieve Q. +* @brief Eth0/Eth1 NPE Frame Receive Q. * * @note THIS IS NOT USED - the Rx queues are read from EthDB QoS configuration * diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S index 61bce5f..14e9854 100644 --- a/arch/arm/cpu/lh7a40x/start.S +++ b/arch/arm/cpu/lh7a40x/start.S @@ -124,7 +124,7 @@ reset: msr cpsr,r0 #define pWDTCTL 0x80001400 /* Watchdog Timer control register */ -#define pINTENC 0x8000050C /* Interupt-Controller enable clear register */ +#define pINTENC 0x8000050C /* Interrupt-Controller enable clear register */ #define pCLKSET 0x80000420 /* clock divisor register */ /* disable watchdog, set watchdog control register to diff --git a/arch/arm/cpu/sa1100/start.S b/arch/arm/cpu/sa1100/start.S index c3acf7a..7223c47 100644 --- a/arch/arm/cpu/sa1100/start.S +++ b/arch/arm/cpu/sa1100/start.S @@ -263,7 +263,7 @@ _dynsym_start_ofs: */ -/* Interupt-Controller base address */ +/* Interrupt-Controller base address */ IC_BASE: .word 0x90050000 #define ICMR 0x04 diff --git a/arch/m68k/include/asm/fec.h b/arch/m68k/include/asm/fec.h index cecec59..e8cea45 100644 --- a/arch/m68k/include/asm/fec.h +++ b/arch/m68k/include/asm/fec.h @@ -39,7 +39,7 @@ typedef struct cpm_buf_desc { uint cbd_bufaddr; /* Buffer address in host memory */ } cbd_t; -#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ +#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ #define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ #define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ #define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ diff --git a/arch/powerpc/include/asm/cpm_8260.h b/arch/powerpc/include/asm/cpm_8260.h index 8302404..6a4a51a 100644 --- a/arch/powerpc/include/asm/cpm_8260.h +++ b/arch/powerpc/include/asm/cpm_8260.h @@ -117,7 +117,7 @@ typedef struct cpm_buf_desc { uint cbd_bufaddr; /* Buffer address in host memory */ } cbd_t; -#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ +#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ #define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ #define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ #define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ diff --git a/arch/powerpc/include/asm/cpm_85xx.h b/arch/powerpc/include/asm/cpm_85xx.h index a74a3a1..1681ecd 100644 --- a/arch/powerpc/include/asm/cpm_85xx.h +++ b/arch/powerpc/include/asm/cpm_85xx.h @@ -110,7 +110,7 @@ typedef struct cpm_buf_desc { uint cbd_bufaddr; /* Buffer address in host memory */ } cbd_t; -#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ +#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ #define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ #define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ #define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ diff --git a/arch/powerpc/include/asm/ppc440ep_gr.h b/arch/powerpc/include/asm/ppc440ep_gr.h index dfd1532..e790963 100644 --- a/arch/powerpc/include/asm/ppc440ep_gr.h +++ b/arch/powerpc/include/asm/ppc440ep_gr.h @@ -182,7 +182,7 @@ #define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */ #define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */ -#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */ +#define PERDV_MASK 0x07000000 /* Peripheral Clock Divisor */ #define PRADV_MASK 0x07000000 /* Primary Divisor A */ #define PRBDV_MASK 0x07000000 /* Primary Divisor B */ #define SPCID_MASK 0x03000000 /* Sync PCI Divisor */ @@ -192,7 +192,7 @@ #define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */ #define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */ #define PLLSYS1_RW_MASK 0x00300000 /* ROM width */ -#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Addres reset vector */ +#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Address reset vector */ #define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */ #define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */ #define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */ diff --git a/arch/powerpc/include/asm/ppc440epx_grx.h b/arch/powerpc/include/asm/ppc440epx_grx.h index 6c21472..c841f0f 100644 --- a/arch/powerpc/include/asm/ppc440epx_grx.h +++ b/arch/powerpc/include/asm/ppc440epx_grx.h @@ -398,7 +398,7 @@ #define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */ #define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */ -#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */ +#define PERDV_MASK 0x07000000 /* Peripheral Clock Divisor */ #define PRADV_MASK 0x07000000 /* Primary Divisor A */ #define PRBDV_MASK 0x07000000 /* Primary Divisor B */ #define SPCID_MASK 0x03000000 /* Sync PCI Divisor */ @@ -408,7 +408,7 @@ #define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */ #define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */ #define PLLSYS1_RW_MASK 0x00300000 /* ROM width */ -#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Addres reset vector */ +#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Address reset vector */ #define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */ #define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */ #define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */ diff --git a/arch/powerpc/include/asm/ppc440gx.h b/arch/powerpc/include/asm/ppc440gx.h index 6f8581b..9924525 100644 --- a/arch/powerpc/include/asm/ppc440gx.h +++ b/arch/powerpc/include/asm/ppc440gx.h @@ -71,7 +71,7 @@ #define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */ #define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */ -#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */ +#define PERDV_MASK 0x07000000 /* Peripheral Clock Divisor */ #define PRADV_MASK 0x07000000 /* Primary Divisor A */ #define PRBDV_MASK 0x07000000 /* Primary Divisor B */ #define SPCID_MASK 0x03000000 /* Sync PCI Divisor */ @@ -81,7 +81,7 @@ #define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */ #define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */ #define PLLSYS1_RW_MASK 0x00300000 /* ROM width */ -#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Addres reset vector */ +#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Address reset vector */ #define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */ #define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */ #define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */ diff --git a/arch/powerpc/include/asm/ppc440sp.h b/arch/powerpc/include/asm/ppc440sp.h index 4387495..cc2ff68 100644 --- a/arch/powerpc/include/asm/ppc440sp.h +++ b/arch/powerpc/include/asm/ppc440sp.h @@ -67,7 +67,7 @@ #define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */ #define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */ -#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */ +#define PERDV_MASK 0x07000000 /* Peripheral Clock Divisor */ #define PRADV_MASK 0x07000000 /* Primary Divisor A */ #define PRBDV_MASK 0x07000000 /* Primary Divisor B */ #define SPCID_MASK 0x03000000 /* Sync PCI Divisor */ @@ -77,7 +77,7 @@ #define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */ #define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */ #define PLLSYS1_RW_MASK 0x00300000 /* ROM width */ -#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Addres reset vector */ +#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Address reset vector */ #define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */ #define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */ #define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */ diff --git a/arch/powerpc/include/asm/ppc440spe.h b/arch/powerpc/include/asm/ppc440spe.h index bad9a40..d59d7d2 100644 --- a/arch/powerpc/include/asm/ppc440spe.h +++ b/arch/powerpc/include/asm/ppc440spe.h @@ -83,7 +83,7 @@ #define PLLD_LFBDV_MASK 0x0000003f /* PLL Local Feedback Divisor */ #define OPBDDV_MASK 0x03000000 /* OPB Clock Divisor Register */ -#define PERDV_MASK 0x07000000 /* Periferal Clock Divisor */ +#define PERDV_MASK 0x07000000 /* Peripheral Clock Divisor */ #define PRADV_MASK 0x07000000 /* Primary Divisor A */ #define PRBDV_MASK 0x07000000 /* Primary Divisor B */ #define SPCID_MASK 0x03000000 /* Sync PCI Divisor */ @@ -93,7 +93,7 @@ #define PLLSYS1_PERCLK_DIV_MASK 0x03000000 /* Peripheral Clk Divisor */ #define PLLSYS1_MAL_DIV_MASK 0x00c00000 /* MAL Clk Divisor */ #define PLLSYS1_RW_MASK 0x00300000 /* ROM width */ -#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Addres reset vector */ +#define PLLSYS1_EAR_MASK 0x00080000 /* ERAP Address reset vector */ #define PLLSYS1_PAE_MASK 0x00040000 /* PCI arbitor enable */ #define PLLSYS1_PCHE_MASK 0x00020000 /* PCI host config enable */ #define PLLSYS1_PISE_MASK 0x00010000 /* PCI init seq. enable */ diff --git a/arch/sparc/cpu/leon3/usb_uhci.c b/arch/sparc/cpu/leon3/usb_uhci.c index 8f99e1d..b1269d2 100644 --- a/arch/sparc/cpu/leon3/usb_uhci.c +++ b/arch/sparc/cpu/leon3/usb_uhci.c @@ -70,7 +70,7 @@ * * Interrupt Transfers. * -------------------- - * For Interupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They + * For Interrupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They * will be inserted after the appropriate (depending the interval setting) skeleton TD. * If an interrupt has been detected the dev->irqhandler is called. The status and number * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the diff --git a/arch/x86/cpu/start.S b/arch/x86/cpu/start.S index 7ccc076..6c84c43 100644 --- a/arch/x86/cpu/start.S +++ b/arch/x86/cpu/start.S @@ -66,7 +66,7 @@ _start: movw %ax, %es movw %ax, %ss - /* Clear the interupt vectors */ + /* Clear the interrupt vectors */ lidt blank_idt_ptr /* Early platform init (setup gpio, etc ) */ diff --git a/arch/x86/include/asm/interrupt.h b/arch/x86/include/asm/interrupt.h index be52fe4..f33f8ed 100644 --- a/arch/x86/include/asm/interrupt.h +++ b/arch/x86/include/asm/interrupt.h @@ -32,7 +32,7 @@ /* arch/x86/cpu/interrupts.c */ void set_vector(u8 intnum, void *routine); -/* arch/x86/lib/interupts.c */ +/* arch/x86/lib/interrupts.c */ void disable_irq(int irq); void enable_irq(int irq); diff --git a/board/Marvell/common/bootseq.txt b/board/Marvell/common/bootseq.txt index e4fefb3..6cae9ea 100644 --- a/board/Marvell/common/bootseq.txt +++ b/board/Marvell/common/bootseq.txt @@ -62,7 +62,7 @@ in_flash: remap gt regs? map PCI mem/io map device space - clear out interupts + clear out interrupts init_timebase env_init serial_init diff --git a/board/Marvell/common/i2c.c b/board/Marvell/common/i2c.c index 8d87b2d..d53495c 100644 --- a/board/Marvell/common/i2c.c +++ b/board/Marvell/common/i2c.c @@ -420,7 +420,7 @@ i2c_read (uchar dev_addr, unsigned int offset, int alen, uchar * data, status = i2c_get_data (data, len); if (status) { #ifdef DEBUG_I2C - printf ("Data not recieved: 0x%02x\n", status); + printf ("Data not received: 0x%02x\n", status); #endif return status; } diff --git a/board/Marvell/common/ns16550.h b/board/Marvell/common/ns16550.h index 0a2951b..9306381 100644 --- a/board/Marvell/common/ns16550.h +++ b/board/Marvell/common/ns16550.h @@ -51,7 +51,7 @@ struct NS16550 #define dlm ier #define FCR_FIFO_EN 0x01 /*fifo enable*/ -#define FCR_RXSR 0x02 /*reciever soft reset*/ +#define FCR_RXSR 0x02 /*receiver soft reset*/ #define FCR_TXSR 0x04 /*transmitter soft reset*/ diff --git a/board/Marvell/include/mv_gen_reg.h b/board/Marvell/include/mv_gen_reg.h index 5e4f076..03fcd88 100644 --- a/board/Marvell/include/mv_gen_reg.h +++ b/board/Marvell/include/mv_gen_reg.h @@ -2237,7 +2237,7 @@ #define CHANNEL2_REGISTER10 0x9070 #define CHANNEL2_REGISTER11 0x9074 -/* MPSCs Interupts */ +/* MPSCs Interrupts */ #define MPSC0_CAUSE 0xb824 #define MPSC0_MASK 0xb8a4 diff --git a/board/bmw/ns16550.h b/board/bmw/ns16550.h index 8aa251d..2087a4a 100644 --- a/board/bmw/ns16550.h +++ b/board/bmw/ns16550.h @@ -37,7 +37,7 @@ struct NS16550 { #define afr iirfcrafr #define FCR_FIFO_EN 0x01 /*fifo enable */ -#define FCR_RXSR 0x02 /*reciever soft reset */ +#define FCR_RXSR 0x02 /*receiver soft reset */ #define FCR_TXSR 0x04 /*transmitter soft reset */ #define FCR_DMS 0x08 /* DMA Mode Select */ diff --git a/board/evb64260/bootseq.txt b/board/evb64260/bootseq.txt index e4fefb3..6cae9ea 100644 --- a/board/evb64260/bootseq.txt +++ b/board/evb64260/bootseq.txt @@ -62,7 +62,7 @@ in_flash: remap gt regs? map PCI mem/io map device space - clear out interupts + clear out interrupts init_timebase env_init serial_init diff --git a/board/evb64260/i2c.c b/board/evb64260/i2c.c index c62b647..88d0dac 100644 --- a/board/evb64260/i2c.c +++ b/board/evb64260/i2c.c @@ -306,7 +306,7 @@ i2c_read(uchar dev_addr, unsigned int offset, int len, uchar* data, status = i2c_get_data(data, len); if (status) { #ifdef DEBUG_I2C - printf("Data not recieved: 0x%02x\n", status); + printf("Data not received: 0x%02x\n", status); #endif return status; } diff --git a/board/freescale/mpc8266ads/mpc8266ads.c b/board/freescale/mpc8266ads/mpc8266ads.c index 66acc41..2caf4aa 100644 --- a/board/freescale/mpc8266ads/mpc8266ads.c +++ b/board/freescale/mpc8266ads/mpc8266ads.c @@ -392,7 +392,7 @@ phys_size_t initdram(int board_type) The 11th column addre will still be mucxed correctly onto the bus. Also be aware that the MPC8266ADS board Rev B has not connected - Row addres 13 to anything. + Row address 13 to anything. The fix is to connect ADD16 (from U37-47) to SADDR12 (U28-126) */ diff --git a/board/intercontrol/digsy_mtc/eeprom.h b/board/intercontrol/digsy_mtc/eeprom.h index 39e0378..fd11555 100644 --- a/board/intercontrol/digsy_mtc/eeprom.h +++ b/board/intercontrol/digsy_mtc/eeprom.h @@ -27,6 +27,6 @@ #define EEPROM_ADDR_IDENT 0 /* identification word offset */ #define EEPROM_ADDR_LEN_SYS 2 /* system area lenght offset */ #define EEPROM_ADDR_LEN_SYSCFG 4 /* system config area length offset */ -#define EEPROM_ADDR_ETHADDR 23 /* ethernet addres offset */ +#define EEPROM_ADDR_ETHADDR 23 /* ethernet address offset */ #endif diff --git a/board/mpl/common/usb_uhci.c b/board/mpl/common/usb_uhci.c index a009437..89d2e0a 100644 --- a/board/mpl/common/usb_uhci.c +++ b/board/mpl/common/usb_uhci.c @@ -67,7 +67,7 @@ * * Interrupt Transfers. * -------------------- - * For Interupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They + * For Interrupt transfers USB_MAX_TEMP_INT_TD Transfer descriptor are available. They * will be inserted after the appropriate (depending the interval setting) skeleton TD. * If an interrupt has been detected the dev->irqhandler is called. The status and number * of transfered bytes is stored in dev->irq_status resp. dev->irq_act_len. If the diff --git a/common/cmd_flash.c b/common/cmd_flash.c index bd49b79..5508d73 100644 --- a/common/cmd_flash.c +++ b/common/cmd_flash.c @@ -139,7 +139,7 @@ int flash_sect_roundb (ulong *addr) } /* bank */ } if (!found) { - /* error, addres not in flash */ + /* error, address not in flash */ printf("Error: end address (0x%08lx) not in flash!\n", *addr); return 1; } diff --git a/common/xyzModem.c b/common/xyzModem.c index 7a46805..a1f955b 100644 --- a/common/xyzModem.c +++ b/common/xyzModem.c @@ -786,7 +786,7 @@ xyzModem_stream_terminate (bool abort, int (*getc) (void)) ZM_DEBUG (zm_dprintf ("Engaging cleanup mode...\n")); /* * Consume any trailing crap left in the inbuffer from - * previous recieved blocks. Since very few files are an exact multiple + * previous received blocks. Since very few files are an exact multiple * of the transfer block size, there will almost always be some gunk here. * If we don't eat it now, RedBoot will think the user typed it. */ diff --git a/doc/README.m68k b/doc/README.m68k index 3766b33..c85febc 100644 --- a/doc/README.m68k +++ b/doc/README.m68k @@ -111,7 +111,7 @@ CONFIG_SYS_MBAR -- defines the base address of the MCF5272 configuration registe CONFIG_SYS_INIT_RAM_ADDR -- defines the base address of the MCF5272 internal SRAM CONFIG_SYS_ENET_BD_BASE - -- defines the base addres of the FEC buffer descriptors + -- defines the base address of the FEC buffer descriptors CONFIG_SYS_SCR -- defines the contents of the System Configuration Register CONFIG_SYS_SPR -- defines the contents of the System Protection Register @@ -138,7 +138,7 @@ CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_INT_FLASH_BASE -- defines the base address of the MCF5282 internal Flash memory CONFIG_SYS_ENET_BD_BASE - -- defines the base addres of the FEC buffer descriptors + -- defines the base address of the FEC buffer descriptors CONFIG_SYS_MFD -- defines the PLL Multiplication Factor Devider diff --git a/doc/README.qemu_mips b/doc/README.qemu_mips index 3985264..e6a3855 100644 --- a/doc/README.qemu_mips +++ b/doc/README.qemu_mips @@ -24,7 +24,7 @@ you can downland #config to build the kernel qemu_mips_defconfig -#patch to fix mips interupt init on 2.6.24.y kernel +#patch to fix mips interrupt init on 2.6.24.y kernel qemu_mips_kernel.patch initrd.gz vmlinux diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c index b1763b1..e616aaf 100644 --- a/drivers/net/4xx_enet.c +++ b/drivers/net/4xx_enet.c @@ -1704,7 +1704,7 @@ int enetInt (struct eth_device *dev) rc = 0; } - /* handle MAL RX EOB interupt from a receive */ + /* handle MAL RX EOB interrupt from a receive */ /* check for EOB on valid channels */ if (uic_mal & UIC_MAL_RXEOB) { mal_eob = mfdcr(MAL0_RXEOBISR); diff --git a/drivers/net/greth.c b/drivers/net/greth.c index 6c32226..2aab52f 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -576,7 +576,7 @@ int greth_recv(struct eth_device *dev) GRETH_REGORIN(®s->control, GRETH_RXEN); } done: - /* return positive length of packet or 0 if non recieved */ + /* return positive length of packet or 0 if non received */ return len; } diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 14b2d35..9386adf 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -282,7 +282,7 @@ OUTL(struct eth_device *dev, int command, u_long addr) * ready to send and receive packets. * * Side effects: - * leaves the natsemi initialized, and ready to recieve packets. + * leaves the natsemi initialized, and ready to receive packets. * * Returns: struct eth_device *: pointer to NIC data structure */ diff --git a/drivers/net/ns8382x.c b/drivers/net/ns8382x.c index 45402cc..6dfcd0e 100644 --- a/drivers/net/ns8382x.c +++ b/drivers/net/ns8382x.c @@ -299,7 +299,7 @@ OUTL(struct eth_device *dev, int command, u_long addr) * Description: Retrieves the MAC address of the card, and sets up some * globals required by other routines, and initializes the NIC, making it * ready to send and receive packets. - * Side effects: initializes ns8382xs, ready to recieve packets. + * Side effects: initializes ns8382xs, ready to receive packets. * Returns: int: number of cards found */ diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c index ab461b4..7f601d4 100644 --- a/drivers/pci/fsl_pci_init.c +++ b/drivers/pci/fsl_pci_init.c @@ -316,7 +316,7 @@ void fsl_pci_init(struct pci_controller *hose, struct fsl_pci_info *pci_info) hose->current_busno = hose->first_busno; out_be32(&pci->pedr, 0xffffffff); /* Clear any errors */ - out_be32(&pci->peer, ~0x20140); /* Enable All Error Interupts except + out_be32(&pci->peer, ~0x20140); /* Enable All Error Interrupts except * - Master abort (pci) * - Master PERR (pci) * - ICCA (PCIe) diff --git a/drivers/rtc/mpc5xxx.c b/drivers/rtc/mpc5xxx.c index ec0b0ef..6b3d5e6 100644 --- a/drivers/rtc/mpc5xxx.c +++ b/drivers/rtc/mpc5xxx.c @@ -44,7 +44,7 @@ typedef struct rtc5200 { volatile ulong aier; /* MBAR+0x80C: alarm and interrupt enable register */ volatile ulong ctr; /* MBAR+0x810: current time register */ volatile ulong cdr; /* MBAR+0x814: current data register */ - volatile ulong asir; /* MBAR+0x818: alarm and stopwatch interupt register */ + volatile ulong asir; /* MBAR+0x818: alarm and stopwatch interrupt register */ volatile ulong piber; /* MBAR+0x81C: periodic interrupt and bus error register */ volatile ulong trdr; /* MBAR+0x820: test register/divides register */ } RTC5200; diff --git a/include/commproc.h b/include/commproc.h index a69a809..8b8cc45 100644 --- a/include/commproc.h +++ b/include/commproc.h @@ -108,7 +108,7 @@ typedef struct cpm_buf_desc { uint cbd_bufaddr; /* Buffer address in host memory */ } cbd_t; -#define BD_SC_EMPTY ((ushort)0x8000) /* Recieve is empty */ +#define BD_SC_EMPTY ((ushort)0x8000) /* Receive is empty */ #define BD_SC_READY ((ushort)0x8000) /* Transmit is ready */ #define BD_SC_WRAP ((ushort)0x2000) /* Last buffer descriptor */ #define BD_SC_INTRPT ((ushort)0x1000) /* Interrupt on change */ diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h index bdc93b6..92b7d6a 100644 --- a/include/configs/NETTA.h +++ b/include/configs/NETTA.h @@ -589,7 +589,7 @@ +------+----------------+------------------------------------------------------------ | # | Name | Comment +------+----------------+------------------------------------------------------------ - | IRQ1 | UINTER_3V | S interupt chips interrupt (common) + | IRQ1 | UINTER_3V | S interrupt chips interrupt (common) | IRQ3 | IRQ_DSP | DSP interrupt | IRQ4 | IRQ_DSP1 | Extra DSP interrupt +------+----------------+------------------------------------------------------------ diff --git a/include/configs/TQM834x.h b/include/configs/TQM834x.h index 7c9dd79..5cd517d 100644 --- a/include/configs/TQM834x.h +++ b/include/configs/TQM834x.h @@ -39,7 +39,7 @@ #define CONFIG_SYS_TEXT_BASE 0x80000000 -/* IMMR Base Addres Register, use Freescale default: 0xff400000 */ +/* IMMR Base Address Register, use Freescale default: 0xff400000 */ #define CONFIG_SYS_IMMR 0xff400000 /* System clock. Primary input clock when in PCI host mode */ diff --git a/include/galileo/gt64260R.h b/include/galileo/gt64260R.h index c2cfb06..b55da9d 100644 --- a/include/galileo/gt64260R.h +++ b/include/galileo/gt64260R.h @@ -1182,7 +1182,7 @@ #define CHANNEL2_REGISTER10 0x9070 #define CHANNEL2_REGISTER11 0x9074 -/* MPSCs Interupts */ +/* MPSCs Interrupts */ #define MPSC0_CAUSE 0xb824 #define MPSC0_MASK 0xb8a4 diff --git a/include/mpc5xxx_sdma.h b/include/mpc5xxx_sdma.h index 8b740e4..821ac0a 100644 --- a/include/mpc5xxx_sdma.h +++ b/include/mpc5xxx_sdma.h @@ -82,11 +82,11 @@ ALL PARAMETERS ARE ALL LONGWORDS (FOUR BYTES EACH). sdma->IntPend = (1 << tasknum); \ } -/* get interupt pending bit of a task */ +/* get interrupt pending bit of a task */ #define SDMA_GET_PENDINGBIT(tasknum) \ ((*(vu_long *)(MPC5XXX_SDMA + 0x14)) & (1<<(tasknum))) -/* get interupt mask bit of a task */ +/* get interrupt mask bit of a task */ #define SDMA_GET_MASKBIT(tasknum) \ ((*(vu_long *)(MPC5XXX_SDMA + 0x18)) & (1<<(tasknum))) diff --git a/include/mpc824x.h b/include/mpc824x.h index fca9371..cb84458 100644 --- a/include/mpc824x.h +++ b/include/mpc824x.h @@ -258,7 +258,7 @@ #define PLTR 0x8000000d /* PCI Latancy Timer Register */ #define PHTR 0x8000000e /* PCI Header Type Register */ #define BISTCTRL 0x8000000f /* BIST Control */ -#define LMBAR 0x80000010 /* Local Base Addres Register */ +#define LMBAR 0x80000010 /* Local Base Address Register */ #define PCSRBAR 0x80000014 /* PCSR Base Address Register */ #define ILR 0x8000003c /* PCI Interrupt Line Register */ #define IPR 0x8000003d /* Interrupt Pin Register */ |