diff options
| -rw-r--r-- | arch/nios2/dts/3c120_devboard.dts | 41 | ||||
| -rw-r--r-- | arch/nios2/include/asm/gpio.h | 80 | ||||
| -rw-r--r-- | board/altera/nios2-generic/nios2-generic.c | 12 | ||||
| -rw-r--r-- | configs/nios2-generic_defconfig | 2 | ||||
| -rw-r--r-- | doc/device-tree-bindings/gpio/altera_pio.txt | 28 | ||||
| -rw-r--r-- | drivers/gpio/Kconfig | 7 | ||||
| -rw-r--r-- | drivers/gpio/altera_pio.c | 316 | ||||
| -rw-r--r-- | include/configs/nios2-generic.h | 21 |
8 files changed, 156 insertions, 351 deletions
diff --git a/arch/nios2/dts/3c120_devboard.dts b/arch/nios2/dts/3c120_devboard.dts index 3d76ec4..4a34ce5 100644 --- a/arch/nios2/dts/3c120_devboard.dts +++ b/arch/nios2/dts/3c120_devboard.dts @@ -68,6 +68,9 @@ <0x00004400 0x08004400 0x00000040>, <0x00004800 0x08004800 0x00000040>, <0x00004c80 0x08004c80 0x00000020>, + <0x00004cc0 0x08004cc0 0x00000010>, + <0x00004ce0 0x08004ce0 0x00000010>, + <0x00004d00 0x08004d00 0x00000010>, <0x00004d50 0x08004d50 0x00000008>, <0x00008000 0x08008000 0x00000020>, <0x00400000 0x08400000 0x00000020>; @@ -130,6 +133,44 @@ current-speed = <115200>; clock-frequency = <62500000>; }; + + user_led_pio_8out: gpio@0x4cc0 { + compatible = "altr,pio-1.0"; + reg = <0x00004cc0 0x00000010>; + resetvalue = <255>; + altr,gpio-bank-width = <8>; + #gpio-cells = <2>; + gpio-controller; + gpio-bank-name = "led"; + }; + + user_dipsw_pio_8in: gpio@0x4ce0 { + compatible = "altr,pio-1.0"; + reg = <0x00004ce0 0x00000010>; + interrupt-parent = <&cpu>; + interrupts = <8>; + edge_type = <2>; + level_trigger = <0>; + resetvalue = <0>; + altr,gpio-bank-width = <8>; + #gpio-cells = <2>; + gpio-controller; + gpio-bank-name = "dipsw"; + }; + + user_pb_pio_4in: gpio@0x4d00 { + compatible = "altr,pio-1.0"; + reg = <0x00004d00 0x00000010>; + interrupt-parent = <&cpu>; + interrupts = <9>; + edge_type = <2>; + level_trigger = <0>; + resetvalue = <0>; + altr,gpio-bank-width = <4>; + #gpio-cells = <2>; + gpio-controller; + gpio-bank-name = "pb"; + }; }; cfi_flash_64m: flash@0x0 { diff --git a/arch/nios2/include/asm/gpio.h b/arch/nios2/include/asm/gpio.h index 908381f..306ab4c 100644 --- a/arch/nios2/include/asm/gpio.h +++ b/arch/nios2/include/asm/gpio.h @@ -1,79 +1 @@ -/* - * nios2 gpio driver - * - * This gpio core is described in http://nioswiki.com/GPIO - * bit[0] data - * bit[1] output enable - * - * When CONFIG_SYS_GPIO_BASE is not defined, the board may either - * provide its own driver or the altera_pio driver may be used. - * - * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _ASM_NIOS2_GPIO_H_ -#define _ASM_NIOS2_GPIO_H_ - -#ifdef CONFIG_SYS_GPIO_BASE -#include <asm/io.h> - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return 0; -} - -static inline int gpio_free(unsigned gpio) -{ - return 0; -} - -static inline int gpio_direction_input(unsigned gpio) -{ - writel(1, CONFIG_SYS_GPIO_BASE + (gpio << 2)); - return 0; -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - writel(value ? 3 : 2, CONFIG_SYS_GPIO_BASE + (gpio << 2)); - return 0; -} - -static inline int gpio_get_value(unsigned gpio) -{ - return readl(CONFIG_SYS_GPIO_BASE + (gpio << 2)); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - writel(value ? 3 : 2, CONFIG_SYS_GPIO_BASE + (gpio << 2)); -} - -static inline int gpio_is_valid(int number) -{ - return ((unsigned)number) < CONFIG_SYS_GPIO_WIDTH; -} -#else -#ifdef CONFIG_ALTERA_PIO -extern int altera_pio_init(u32 base, u8 width, char iot, - u32 rstval, u32 negmask, - const char *label); - -extern void altera_pio_info(void); -#define gpio_status() altera_pio_info() -#endif - -extern int gpio_request(unsigned gpio, const char *label); -extern int gpio_free(unsigned gpio); -extern int gpio_direction_input(unsigned gpio); -extern int gpio_direction_output(unsigned gpio, int value); -extern int gpio_get_value(unsigned gpio); -extern void gpio_set_value(unsigned gpio, int value); -extern int gpio_is_valid(int number); -#endif /* CONFIG_SYS_GPIO_BASE */ - -#endif /* _ASM_NIOS2_GPIO_H_ */ +#include <asm-generic/gpio.h> diff --git a/board/altera/nios2-generic/nios2-generic.c b/board/altera/nios2-generic/nios2-generic.c index 384fee9..cb98a08 100644 --- a/board/altera/nios2-generic/nios2-generic.c +++ b/board/altera/nios2-generic/nios2-generic.c @@ -35,18 +35,6 @@ int board_early_init_f(void) return 0; } -int board_early_init_r(void) -{ -#ifdef CONFIG_ALTERA_PIO -#ifdef LED_PIO_BASE - altera_pio_init(LED_PIO_BASE, LED_PIO_WIDTH, 'o', - LED_PIO_RSTVAL, (1 << LED_PIO_WIDTH) - 1, - "led"); -#endif -#endif - return 0; -} - int checkboard(void) { printf("BOARD : %s\n", CONFIG_BOARD_NAME); diff --git a/configs/nios2-generic_defconfig b/configs/nios2-generic_defconfig index 9dc6a72..ad72272 100644 --- a/configs/nios2-generic_defconfig +++ b/configs/nios2-generic_defconfig @@ -1,5 +1,6 @@ CONFIG_NIOS2=y CONFIG_DM_SERIAL=y +CONFIG_DM_GPIO=y CONFIG_TARGET_NIOS2_GENERIC=y CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard" CONFIG_HUSH_PARSER=y @@ -15,5 +16,6 @@ CONFIG_CMD_PING=y CONFIG_OF_CONTROL=y CONFIG_NET_RANDOM_ETHADDR=y CONFIG_DM=y +CONFIG_ALTERA_PIO=y CONFIG_ALTERA_JTAG_UART=y CONFIG_ALTERA_JTAG_UART_BYPASS=y diff --git a/doc/device-tree-bindings/gpio/altera_pio.txt b/doc/device-tree-bindings/gpio/altera_pio.txt new file mode 100644 index 0000000..cf71eb2 --- /dev/null +++ b/doc/device-tree-bindings/gpio/altera_pio.txt @@ -0,0 +1,28 @@ +Altera GPIO controller bindings + +Required properties: +- compatible: + - "altr,pio-1.0" +- reg: Physical base address and length of the controller's registers. + +Optional properties: +- altr,gpio-bank-width: Width of the GPIO bank. This defines how many pins the + GPIO device has. Ranges between 1-32. Optional and defaults to 32 if not + specified. +- gpio-bank-name: bank name attached to this device. + +Example: + +user_led_pio_8out: gpio@0x4cc0 { + compatible = "altr,pio-1.0"; + reg = <0x00004cc0 0x00000010>; + resetvalue = <255>; + altr,gpio-bank-width = <8>; + #gpio-cells = <2>; + gpio-controller; + gpio-bank-name = "led"; +}; + +In this example, the gpio can be accessed as led[0..7] using gpio command of +u-boot. +==> gpio clear led0 diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index ef57a89..9e49471 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -14,6 +14,13 @@ config DM_GPIO particular GPIOs that they provide. The uclass interface is defined in include/asm-generic/gpio.h. +config ALTERA_PIO + bool "Altera PIO driver" + depends on DM_GPIO + help + Select this to enable PIO for Altera devices. Please find + details on the "Embedded Peripherals IP User Guide" of Altera. + config DWAPB_GPIO bool "DWAPB GPIO driver" depends on DM && DM_GPIO diff --git a/drivers/gpio/altera_pio.c b/drivers/gpio/altera_pio.c index 3ca5907..7ceb80e 100644 --- a/drivers/gpio/altera_pio.c +++ b/drivers/gpio/altera_pio.c @@ -1,286 +1,122 @@ /* - * Driver for Altera's PIO ip core - * + * Copyright (C) 2015 Thomas Chou <thomas@wytron.com.tw> * Copyright (C) 2011 Missing Link Electronics * Joachim Foerster <joachim@missinglinkelectronics.com> * * SPDX-License-Identifier: GPL-2.0+ - * - * To use this driver, in your board's config. header: - * #define CONFIG_ALTERA_PIO - * #define CONFIG_SYS_ALTERA_PIO_NUM <number-of-pio-cores> - * #define CONFIG_SYS_ALTERA_PIO_GPIO_NUM <total-number-of-gpios> - * And in your board's early setup routine: - * altera_pio_init(<baseaddr>, <width>, 'i'|'o'|'t', - * <reset-value>, <neg-mask>, "label"); - * - 'i'|'o'|'t': PIO is input-only/output-only/tri-state - * - <reset-value>: for correct initial status display, output-only - * - <neg-mask> is meant to be used to in cases of active-low - * GPIOs, such as LEDs and buttons (on/pressed == 0). Each bit - * which is 1 in <neg-mask> inverts the corresponding GPIO's value - * before set/after get. So: gpio_set_value(gpio, 1) => LED on . - * - * Do NOT define CONFIG_SYS_GPIO_BASE ! - * - * Optionally, in your board's config. header: - * - To force a GPIO numbering scheme like in Linux ... - * #define CONFIG_GPIO_DOWNTO_NUMBERING - * ... starting with 255 (default) - * #define CONFIG_GPIO_DOWNTO_MAX 255 */ #include <common.h> +#include <dm.h> +#include <errno.h> +#include <malloc.h> +#include <fdtdec.h> #include <asm/io.h> #include <asm/gpio.h> -#ifdef CONFIG_GPIO_DOWNTO_NUMBERING -#ifndef CONFIG_GPIO_DOWNTO_MAX -#define CONFIG_GPIO_DOWNTO_MAX 255 -#endif -#endif - -#define ALTERA_PIO_DATA 0x0 -#define ALTERA_PIO_DIR 0x4 - -#define GPIO_LABEL_SIZE 9 +DECLARE_GLOBAL_DATA_PTR; +struct altera_pio_regs { + u32 data; /* Data register */ + u32 direction; /* Direction register */ +}; -static struct altera_pio { - u32 base; - u8 width; - char iot; - u32 negmask; - u32 sh_data; - u32 sh_dir; - int gidx; - char label[GPIO_LABEL_SIZE]; -} pios[CONFIG_SYS_ALTERA_PIO_NUM]; +struct altera_pio_platdata { + struct altera_pio_regs *regs; + int gpio_count; + const char *bank_name; +}; -static int pio_num; - -static struct altera_pio_gpio { - unsigned num; - struct altera_pio *pio; - char reqlabel[GPIO_LABEL_SIZE]; -} gpios[CONFIG_SYS_ALTERA_PIO_GPIO_NUM]; - -static int pio_gpio_num; - - -static int altera_pio_gidx(unsigned gpio) +static int altera_pio_direction_input(struct udevice *dev, unsigned pin) { - int i; + struct altera_pio_platdata *plat = dev_get_platdata(dev); + struct altera_pio_regs *const regs = plat->regs; - for (i = 0; i < pio_gpio_num; ++i) { - if (gpio == gpios[i].num) - break; - } - if (i >= pio_gpio_num) - return -1; - return i; -} + clrbits_le32(®s->direction, 1 << pin); -static struct altera_pio *altera_pio_get_and_mask(unsigned gpio, u32 *mask) -{ - int gidx = altera_pio_gidx(gpio); - if (gidx < 0) - return NULL; - if (mask) - *mask = 1 << (gidx - gpios[gidx].pio->gidx); - return gpios[gidx].pio; + return 0; } -#define altera_pio_use_gidx(_gidx, _reqlabel) \ - { strncpy(gpios[_gidx].reqlabel, _reqlabel, GPIO_LABEL_SIZE); } -#define altera_pio_unuse_gidx(_gidx) { gpios[_gidx].reqlabel[0] = '\0'; } -#define altera_pio_is_gidx_used(_gidx) (gpios[_gidx].reqlabel[0] != '\0') - -static int altera_pio_gpio_init(struct altera_pio *pio, u8 width) +static int altera_pio_direction_output(struct udevice *dev, unsigned pin, + int val) { - u8 gidx = pio_gpio_num; - int i; - - if (!width) - return -1; - if ((pio_gpio_num + width) > CONFIG_SYS_ALTERA_PIO_GPIO_NUM) - return -1; - - for (i = 0; i < width; ++i) { -#ifdef CONFIG_GPIO_DOWNTO_NUMBERING - gpios[pio_gpio_num + i].num = \ - CONFIG_GPIO_DOWNTO_MAX + 1 - gidx - width + i; -#else - gpios[pio_gpio_num + i].num = pio_gpio_num + i; -#endif - gpios[pio_gpio_num + i].pio = pio; - altera_pio_unuse_gidx(pio_gpio_num + i); - } - pio_gpio_num += width; - return gidx; -} + struct altera_pio_platdata *plat = dev_get_platdata(dev); + struct altera_pio_regs *const regs = plat->regs; -int altera_pio_init(u32 base, u8 width, char iot, u32 rstval, u32 negmask, - const char *label) -{ - if (pio_num >= CONFIG_SYS_ALTERA_PIO_NUM) - return -1; + if (val) + setbits_le32(®s->data, 1 << pin); + else + clrbits_le32(®s->data, 1 << pin); + /* change the data first, then the direction. to avoid glitch */ + setbits_le32(®s->direction, 1 << pin); - pios[pio_num].base = base; - pios[pio_num].width = width; - pios[pio_num].iot = iot; - switch (iot) { - case 'i': - /* input only */ - pios[pio_num].sh_dir = 0; - pios[pio_num].sh_data = readl(base + ALTERA_PIO_DATA); - break; - case 'o': - /* output only */ - pios[pio_num].sh_dir = 0xffffffff & ((1 << width) - 1); - pios[pio_num].sh_data = rstval; - break; - case 't': - /* bidir, tri-state */ - pios[pio_num].sh_dir = readl(base + ALTERA_PIO_DIR); - pios[pio_num].sh_data = readl(base + ALTERA_PIO_DATA); - break; - default: - return -1; - } - pios[pio_num].negmask = negmask & ((1 << width) - 1); - pios[pio_num].gidx = altera_pio_gpio_init(&pios[pio_num], width); - if (pios[pio_num].gidx < 0) - return -1; - strncpy(pios[pio_num].label, label, GPIO_LABEL_SIZE); - return pio_num++; + return 0; } -void altera_pio_info(void) +static int altera_pio_get_value(struct udevice *dev, unsigned pin) { - int i; - int j; - int gidx; - u32 mask; + struct altera_pio_platdata *plat = dev_get_platdata(dev); + struct altera_pio_regs *const regs = plat->regs; - for (i = 0; i < pio_num; ++i) { - printf("Altera PIO % 2d, @0x%08x, " - "width: %u, label: %s\n", - i, pios[i].base, pios[i].width, pios[i].label); - gidx = pios[i].gidx; - for (j = gidx; j < (gidx + pios[i].width); ++j) { - mask = 1 << (j - gidx); - printf("\tGPIO % 4d: %s %s [%c] %s\n", - gpios[j].num, - gpios[j].pio->sh_dir & mask ? "out" : " in", - gpio_get_value(gpios[j].num) ? "set" : "clr", - altera_pio_is_gidx_used(j) ? 'x' : ' ', - gpios[j].reqlabel); - } - } + return readl(®s->data) & (1 << pin); } -int gpio_request(unsigned gpio, const char *label) +static int altera_pio_set_value(struct udevice *dev, unsigned pin, int val) { - int gidx = altera_pio_gidx(gpio); - if (gidx < 0) - return gidx; - if (altera_pio_is_gidx_used(gidx)) - return -1; - - altera_pio_use_gidx(gidx, label); - return 0; -} + struct altera_pio_platdata *plat = dev_get_platdata(dev); + struct altera_pio_regs *const regs = plat->regs; -int gpio_free(unsigned gpio) -{ - int gidx = altera_pio_gidx(gpio); - if (gidx < 0) - return gidx; - if (!altera_pio_is_gidx_used(gidx)) - return -1; + if (val) + setbits_le32(®s->data, 1 << pin); + else + clrbits_le32(®s->data, 1 << pin); - altera_pio_unuse_gidx(gidx); return 0; } -int gpio_direction_input(unsigned gpio) +static int altera_pio_probe(struct udevice *dev) { - u32 mask; - struct altera_pio *pio; + struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); + struct altera_pio_platdata *plat = dev_get_platdata(dev); - pio = altera_pio_get_and_mask(gpio, &mask); - if (!pio) - return -1; - if (pio->iot == 'o') - return -1; + uc_priv->gpio_count = plat->gpio_count; + uc_priv->bank_name = plat->bank_name; - writel(pio->sh_dir &= ~mask, pio->base + ALTERA_PIO_DIR); return 0; } -int gpio_direction_output(unsigned gpio, int value) +static int altera_pio_ofdata_to_platdata(struct udevice *dev) { - u32 mask; - struct altera_pio *pio; + struct altera_pio_platdata *plat = dev_get_platdata(dev); - pio = altera_pio_get_and_mask(gpio, &mask); - if (!pio) - return -1; - if (pio->iot == 'i') - return -1; + plat->regs = ioremap(dev_get_addr(dev), + sizeof(struct altera_pio_regs)); + plat->gpio_count = fdtdec_get_int(gd->fdt_blob, dev->of_offset, + "altr,gpio-bank-width", 32); + plat->bank_name = fdt_getprop(gd->fdt_blob, dev->of_offset, + "gpio-bank-name", NULL); - value = (pio->negmask & mask) ? !value : value; - if (value) - pio->sh_data |= mask; - else - pio->sh_data &= ~mask; - writel(pio->sh_data, pio->base + ALTERA_PIO_DATA); - writel(pio->sh_dir |= mask, pio->base + ALTERA_PIO_DIR); return 0; } -int gpio_get_value(unsigned gpio) -{ - u32 mask; - struct altera_pio *pio; - u32 val; - - pio = altera_pio_get_and_mask(gpio, &mask); - if (!pio) - return -1; - - if ((pio->sh_dir & mask) || (pio->iot == 'o')) - val = pio->sh_data & mask; - else - val = readl(pio->base + ALTERA_PIO_DATA) & mask; - return (pio->negmask & mask) ? !val : val; -} - -void gpio_set_value(unsigned gpio, int value) -{ - u32 mask; - struct altera_pio *pio; - - pio = altera_pio_get_and_mask(gpio, &mask); - if (!pio) - return; - if (pio->iot == 'i') - return; - - value = (pio->negmask & mask) ? !value : value; - if (value) - pio->sh_data |= mask; - else - pio->sh_data &= ~mask; - writel(pio->sh_data, pio->base + ALTERA_PIO_DATA); - return; -} - -int gpio_is_valid(int number) -{ - int gidx = altera_pio_gidx(number); - - if (gidx < 0) - return 1; - return 0; -} +static const struct dm_gpio_ops altera_pio_ops = { + .direction_input = altera_pio_direction_input, + .direction_output = altera_pio_direction_output, + .get_value = altera_pio_get_value, + .set_value = altera_pio_set_value, +}; + +static const struct udevice_id altera_pio_ids[] = { + { .compatible = "altr,pio-1.0" }, + { } +}; + +U_BOOT_DRIVER(altera_pio) = { + .name = "altera_pio", + .id = UCLASS_GPIO, + .of_match = altera_pio_ids, + .ops = &altera_pio_ops, + .ofdata_to_platdata = altera_pio_ofdata_to_platdata, + .platdata_auto_alloc_size = sizeof(struct altera_pio_platdata), + .probe = altera_pio_probe, +}; diff --git a/include/configs/nios2-generic.h b/include/configs/nios2-generic.h index c330c0a..62f7db9 100644 --- a/include/configs/nios2-generic.h +++ b/include/configs/nios2-generic.h @@ -15,7 +15,6 @@ #include "../board/altera/nios2-generic/custom_fpga.h" /* fpga parameters */ #define CONFIG_BOARD_NAME "nios2-generic" /* custom board name */ #define CONFIG_BOARD_EARLY_INIT_F /* enable early board-spec. init */ -#define CONFIG_BOARD_EARLY_INIT_R #define CONFIG_DISPLAY_CPUINFO #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_SYS_NIOS_SYSID_BASE CONFIG_SYS_SYSID_BASE @@ -32,25 +31,6 @@ #define CONFIG_SYS_TIMER_RATE CONFIG_SYS_TIMER_FREQ /* - * STATUS LED - */ -#define CONFIG_ALTERA_PIO -#define CONFIG_SYS_ALTERA_PIO_NUM 1 -#define CONFIG_SYS_ALTERA_PIO_GPIO_NUM LED_PIO_WIDTH - -#define CONFIG_STATUS_LED /* Enable status driver */ -#define CONFIG_BOARD_SPECIFIC_LED -#define CONFIG_GPIO_LED /* Enable GPIO LED driver */ -#define CONFIG_GPIO /* Enable GPIO driver */ -#define LED_PIO_BASE USER_LED_PIO_8OUT_BASE -#define LED_PIO_WIDTH 8 -#define LED_PIO_RSTVAL 0xff - -#define STATUS_LED_BIT 0 /* Bit-0 on GPIO */ -#define STATUS_LED_STATE 1 /* Blinking */ -#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) /* 500 msec */ - -/* * BOOTP options */ #define CONFIG_BOOTP_BOOTFILESIZE @@ -110,5 +90,6 @@ #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - 0x20000) #define CONFIG_CMDLINE_EDITING +#define CONFIG_CMD_GPIO #endif /* __CONFIG_H */ |