diff options
307 files changed, 4075 insertions, 3544 deletions
@@ -4,39 +4,47 @@ # 1) Generate generic-asm-offsets.h # 2) Generate asm-offsets.h -##### -# 1) Generate generic-asm-offsets.h - -generic-offsets-file := include/generated/generic-asm-offsets.h - -always := $(generic-offsets-file) -targets := $(generic-offsets-file) lib/asm-offsets.s +# Default sed regexp - multiline due to syntax constraints +define sed-y + "s:[[:space:]]*\.ascii[[:space:]]*\"\(.*\)\":\1:; \ + /^->/{s:->#\(.*\):/* \1 */:; \ + s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \ + s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \ + s:->::; p;}" +endef -quiet_cmd_generic-offsets = GEN $@ -define cmd_generic-offsets +# Use filechk to avoid rebuilds when a header changes, but the resulting file +# does not +define filechk_offsets (set -e; \ - echo "#ifndef __GENERIC_ASM_OFFSETS_H__"; \ - echo "#define __GENERIC_ASM_OFFSETS_H__"; \ + echo "#ifndef $2"; \ + echo "#define $2"; \ echo "/*"; \ echo " * DO NOT MODIFY."; \ echo " *"; \ echo " * This file was generated by Kbuild"; \ - echo " *"; \ echo " */"; \ echo ""; \ - sed -ne $(sed-y) $<; \ + sed -ne $(sed-y); \ echo ""; \ - echo "#endif" ) > $@ + echo "#endif" ) endef +##### +# 1) Generate generic-asm-offsets.h + +generic-offsets-file := include/generated/generic-asm-offsets.h + +always := $(generic-offsets-file) +targets := $(generic-offsets-file) lib/asm-offsets.s + # We use internal kbuild rules to avoid the "is up to date" message from make lib/asm-offsets.s: lib/asm-offsets.c FORCE $(Q)mkdir -p $(dir $@) $(call if_changed_dep,cc_s_c) -$(obj)/$(generic-offsets-file): lib/asm-offsets.s Kbuild - $(Q)mkdir -p $(dir $@) - $(call cmd,generic-offsets) +$(obj)/$(generic-offsets-file): lib/asm-offsets.s FORCE + $(call filechk,offsets,__GENERIC_ASM_OFFSETS_H__) ##### # 2) Generate asm-offsets.h @@ -50,39 +58,12 @@ always += $(offsets-file) targets += $(offsets-file) targets += arch/$(ARCH)/lib/asm-offsets.s - -# Default sed regexp - multiline due to syntax constraints -define sed-y - "s:[[:space:]]*\.ascii[[:space:]]*\"\(.*\)\":\1:; \ - /^->/{s:->#\(.*\):/* \1 */:; \ - s:^->\([^ ]*\) [\$$#]*\([-0-9]*\) \(.*\):#define \1 \2 /* \3 */:; \ - s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \ - s:->::; p;}" -endef - CFLAGS_asm-offsets.o := -DDO_DEPS_ONLY -quiet_cmd_offsets = GEN $@ -define cmd_offsets - (set -e; \ - echo "#ifndef __ASM_OFFSETS_H__"; \ - echo "#define __ASM_OFFSETS_H__"; \ - echo "/*"; \ - echo " * DO NOT MODIFY."; \ - echo " *"; \ - echo " * This file was generated by Kbuild"; \ - echo " *"; \ - echo " */"; \ - echo ""; \ - sed -ne $(sed-y) $<; \ - echo ""; \ - echo "#endif" ) > $@ -endef - # We use internal kbuild rules to avoid the "is up to date" message from make arch/$(ARCH)/lib/asm-offsets.s: arch/$(ARCH)/lib/asm-offsets.c FORCE $(Q)mkdir -p $(dir $@) $(call if_changed_dep,cc_s_c) -$(obj)/$(offsets-file): arch/$(ARCH)/lib/asm-offsets.s Kbuild - $(call cmd,offsets) +$(obj)/$(offsets-file): arch/$(ARCH)/lib/asm-offsets.s FORCE + $(call filechk,offsets,__ASM_OFFSETS_H__) @@ -54,7 +54,7 @@ config CC_OPTIMIZE_FOR_SIZE config SYS_MALLOC_F bool "Enable malloc() pool before relocation" - default 0x400 + default y if DM help Before relocation memory is very limited on many platforms. Still, we can provide a small malloc() pool if needed. Driver model in @@ -184,7 +184,7 @@ config SYS_TEXT_BASE TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture config SYS_CLK_FREQ - depends on ARC + depends on ARC || ARCH_SUNXI int "CPU clock frequency" help TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture @@ -1,7 +1,7 @@ VERSION = 2015 PATCHLEVEL = 04 SUBLEVEL = -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = # *DOCUMENTATION* @@ -469,10 +469,10 @@ KBUILD_DEFCONFIG := sandbox_defconfig export KBUILD_DEFCONFIG KBUILD_KCONFIG config: scripts_basic outputmakefile FORCE - +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@ + $(Q)$(MAKE) $(build)=scripts/kconfig $@ %config: scripts_basic outputmakefile FORCE - +$(Q)$(CONFIG_SHELL) $(srctree)/scripts/multiconfig.sh $@ + $(Q)$(MAKE) $(build)=scripts/kconfig $@ else # =========================================================================== @@ -496,6 +496,15 @@ $(KCONFIG_CONFIG) include/config/auto.conf.cmd: ; # we execute the config step to be sure to catch updated Kconfig files include/config/%.conf: $(KCONFIG_CONFIG) include/config/auto.conf.cmd $(Q)$(MAKE) -f $(srctree)/Makefile silentoldconfig + @# If the following part fails, include/config/auto.conf should be + @# deleted so "make silentoldconfig" will be re-run on the next build. + $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.autoconf || \ + { rm -f include/config/auto.conf; false; } + @# include/config.h has been updated after "make silentoldconfig". + @# We need to touch include/config/auto.conf so it gets newer + @# than include/config.h. + @# Otherwise, 'make silentoldconfig' would be invoked twice. + $(Q)touch include/config/auto.conf -include include/autoconf.mk -include include/autoconf.mk.dep @@ -1154,7 +1163,7 @@ prepare2: prepare3 outputmakefile prepare1: prepare2 $(version_h) $(timestamp_h) \ include/config/auto.conf -ifeq ($(__HAVE_ARCH_GENERIC_BOARD),) +ifeq ($(CONFIG_HAVE_GENERIC_BOARD),) ifeq ($(CONFIG_SYS_GENERIC_BOARD),y) @echo >&2 " Your architecture does not support generic board." @echo >&2 " Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file." @@ -3483,9 +3483,6 @@ FIT uImage format: Adds the MTD partitioning infrastructure from the Linux kernel. Needed for UBI support. - CONFIG_MTD_NAND_VERIFY_WRITE - verify if the written data is correct reread. - - UBI support CONFIG_CMD_UBI @@ -4190,9 +4187,9 @@ Configuration Settings: to this new framework over time. Defining this will disable the arch/foo/lib/board.c file and use common/board_f.c and common/board_r.c instead. To use this option your architecture - must support it (i.e. must define __HAVE_ARCH_GENERIC_BOARD in - its config.mk file). If you find problems enabling this option on - your board please report the problem and send patches! + must support it (i.e. must select HAVE_GENERIC_BOARD in arch/Kconfig). + If you find problems enabling this option on your board please report + the problem and send patches! - CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only) This is set by OMAP boards for the max time that reset should diff --git a/arch/Kconfig b/arch/Kconfig index 3d419bc..ca617e7 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -1,3 +1,10 @@ +config HAVE_GENERIC_BOARD + bool + +config SYS_GENERIC_BOARD + bool + depends on HAVE_GENERIC_BOARD + choice prompt "Architecture select" default SANDBOX @@ -5,34 +12,48 @@ choice config ARC bool "ARC architecture" select HAVE_PRIVATE_LIBGCC + select HAVE_GENERIC_BOARD + select SYS_GENERIC_BOARD config ARM bool "ARM architecture" select HAVE_PRIVATE_LIBGCC + select HAVE_GENERIC_BOARD select SUPPORT_OF_CONTROL config AVR32 bool "AVR32 architecture" + select HAVE_GENERIC_BOARD config BLACKFIN bool "Blackfin architecture" + select HAVE_GENERIC_BOARD + select SYS_GENERIC_BOARD config M68K bool "M68000 architecture" + select HAVE_GENERIC_BOARD + select SYS_GENERIC_BOARD config MICROBLAZE bool "MicroBlaze architecture" + select HAVE_GENERIC_BOARD + select SYS_GENERIC_BOARD select SUPPORT_OF_CONTROL config MIPS bool "MIPS architecture" select HAVE_PRIVATE_LIBGCC + select HAVE_GENERIC_BOARD + select SYS_GENERIC_BOARD config NDS32 bool "NDS32 architecture" config NIOS2 bool "Nios II architecture" + select HAVE_GENERIC_BOARD + select SYS_GENERIC_BOARD config OPENRISC bool "OpenRISC architecture" @@ -40,10 +61,13 @@ config OPENRISC config PPC bool "PowerPC architecture" select HAVE_PRIVATE_LIBGCC + select HAVE_GENERIC_BOARD select SUPPORT_OF_CONTROL config SANDBOX bool "Sandbox" + select HAVE_GENERIC_BOARD + select SYS_GENERIC_BOARD select SUPPORT_OF_CONTROL config SH @@ -56,6 +80,8 @@ config SPARC config X86 bool "x86 architecture" select HAVE_PRIVATE_LIBGCC + select HAVE_GENERIC_BOARD + select SYS_GENERIC_BOARD select SUPPORT_OF_CONTROL endchoice diff --git a/arch/arc/config.mk b/arch/arc/config.mk index 4fcd407..04c034b 100644 --- a/arch/arc/config.mk +++ b/arch/arc/config.mk @@ -57,6 +57,3 @@ LDFLAGS_FINAL += -pie # Load address for standalone apps CONFIG_STANDALONE_LOAD_ADDR ?= 0x82000000 - -# Support generic board on ARC -__HAVE_ARCH_GENERIC_BOARD := y diff --git a/arch/arc/include/asm/config.h b/arch/arc/include/asm/config.h index b4e9099..8936f5c 100644 --- a/arch/arc/include/asm/config.h +++ b/arch/arc/include/asm/config.h @@ -7,7 +7,6 @@ #ifndef __ASM_ARC_CONFIG_H_ #define __ASM_ARC_CONFIG_H_ -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_GENERIC_GLOBAL_DATA #define CONFIG_SYS_BOOT_RAMDISK_HIGH #define CONFIG_ARCH_EARLY_INIT_R diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index b9ebee1..80b0d34 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -286,13 +286,8 @@ config TARGET_MX35PDK bool "Support mx35pdk" select CPU_ARM1136 -config TARGET_RPI - bool "Support rpi" - select CPU_ARM1176 - -config TARGET_RPI_2 - bool "Support rpi_2" - select CPU_V7 +config ARCH_BCM283X + bool "Broadcom BCM283X family" config TARGET_INTEGRATORAP_CM946ES bool "Support integratorap_cm946es" @@ -433,6 +428,10 @@ config ARCH_KEYSTONE select CPU_V7 select SUPPORT_SPL +config ARCH_MX6 + bool "Freescale MX6" + select CPU_V7 + config TARGET_M53EVK bool "Support m53evk" select CPU_V7 @@ -723,9 +722,9 @@ endchoice source "arch/arm/mach-at91/Kconfig" -source "arch/arm/mach-davinci/Kconfig" +source "arch/arm/mach-bcm283x/Kconfig" -source "arch/arm/cpu/arm1176/bcm2835/Kconfig" +source "arch/arm/mach-davinci/Kconfig" source "arch/arm/cpu/armv7/exynos/Kconfig" @@ -735,6 +734,8 @@ source "arch/arm/mach-keystone/Kconfig" source "arch/arm/mach-kirkwood/Kconfig" +source "arch/arm/cpu/armv7/mx6/Kconfig" + source "arch/arm/mach-nomadik/Kconfig" source "arch/arm/cpu/armv7/omap3/Kconfig" @@ -761,6 +762,8 @@ source "arch/arm/cpu/armv7/Kconfig" source "arch/arm/cpu/armv8/Kconfig" +source "arch/arm/imx-common/Kconfig" + source "board/aristainetos/Kconfig" source "board/BuR/kwb/Kconfig" source "board/BuR/tseries/Kconfig" @@ -834,8 +837,6 @@ source "board/palmtreo680/Kconfig" source "board/phytec/pcm051/Kconfig" source "board/ppcag/bg0900/Kconfig" source "board/pxa255_idp/Kconfig" -source "board/raspberrypi/rpi/Kconfig" -source "board/raspberrypi/rpi_2/Kconfig" source "board/samsung/smdk2410/Kconfig" source "board/sandisk/sansa_fuze_plus/Kconfig" source "board/scb9328/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 08946de..bac3cb2 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -5,6 +5,7 @@ # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. machine-$(CONFIG_ARCH_AT91) += at91 +machine-$(CONFIG_ARCH_BCM283X) += bcm283x machine-$(CONFIG_ARCH_DAVINCI) += davinci machine-$(CONFIG_ARCH_HIGHBANK) += highbank machine-$(CONFIG_ARCH_KEYSTONE) += keystone diff --git a/arch/arm/config.mk b/arch/arm/config.mk index 0667984..c005ce4 100644 --- a/arch/arm/config.mk +++ b/arch/arm/config.mk @@ -19,9 +19,6 @@ PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections \ PLATFORM_RELFLAGS += $(call cc-option, -msoft-float) \ $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,)) -# Support generic board on ARM -__HAVE_ARCH_GENERIC_BOARD := y - PLATFORM_CPPFLAGS += -D__ARM__ # Choose between ARM/Thumb instruction sets diff --git a/arch/arm/cpu/arm1176/Makefile b/arch/arm/cpu/arm1176/Makefile index 480e130..deec427 100644 --- a/arch/arm/cpu/arm1176/Makefile +++ b/arch/arm/cpu/arm1176/Makefile @@ -10,5 +10,3 @@ extra-y = start.o obj-y = cpu.o - -obj-$(CONFIG_BCM2835) += bcm2835/ diff --git a/arch/arm/cpu/arm1176/bcm2835/Kconfig b/arch/arm/cpu/arm1176/bcm2835/Kconfig deleted file mode 100644 index 73cc72b..0000000 --- a/arch/arm/cpu/arm1176/bcm2835/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_RPI || TARGET_RPI_2 - -config DM - default y - -config DM_SERIAL - default y - -config DM_GPIO - default y - -endif diff --git a/arch/arm/cpu/armv7/Makefile b/arch/arm/cpu/armv7/Makefile index 1312a9d..21fc03b 100644 --- a/arch/arm/cpu/armv7/Makefile +++ b/arch/arm/cpu/armv7/Makefile @@ -39,7 +39,6 @@ endif obj-$(if $(filter am33xx,$(SOC)),y) += am33xx/ obj-$(if $(filter armada-xp,$(SOC)),y) += armada-xp/ -obj-$(CONFIG_BCM2835) += bcm2835/ obj-$(if $(filter bcm281xx,$(SOC)),y) += bcm281xx/ obj-$(if $(filter bcmcygnus,$(SOC)),y) += bcmcygnus/ obj-$(if $(filter bcmnsp,$(SOC)),y) += bcmnsp/ diff --git a/arch/arm/cpu/armv7/bcm2835/Makefile b/arch/arm/cpu/armv7/bcm2835/Makefile deleted file mode 100644 index ed1ee47..0000000 --- a/arch/arm/cpu/armv7/bcm2835/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# (C) Copyright 2012 Stephen Warren -# -# SPDX-License-Identifier: GPL-2.0+ -# - -src_dir := ../../arm1176/bcm2835/ - -obj-y := -obj-y += $(src_dir)/init.o -obj-y += $(src_dir)/reset.o -obj-y += $(src_dir)/timer.o -obj-y += $(src_dir)/mbox.o diff --git a/arch/arm/cpu/armv7/exynos/Kconfig b/arch/arm/cpu/armv7/exynos/Kconfig index eb86a7f..bd7540a 100644 --- a/arch/arm/cpu/armv7/exynos/Kconfig +++ b/arch/arm/cpu/armv7/exynos/Kconfig @@ -80,12 +80,6 @@ config DM_SPI_FLASH config DM_GPIO default y -config SYS_MALLOC_F - default y - -config SYS_MALLOC_F_LEN - default 0x400 - source "board/samsung/smdkv310/Kconfig" source "board/samsung/trats/Kconfig" source "board/samsung/universal_c210/Kconfig" diff --git a/arch/arm/cpu/armv7/mx6/Kconfig b/arch/arm/cpu/armv7/mx6/Kconfig new file mode 100644 index 0000000..076ba52 --- /dev/null +++ b/arch/arm/cpu/armv7/mx6/Kconfig @@ -0,0 +1,42 @@ +if ARCH_MX6 + +config MX6 + bool + default y + +config MX6D + bool + +config MX6DL + bool + +config MX6Q + bool + +config MX6QDL + bool + +config MX6S + bool + +config MX6SL + bool + +config MX6SX + bool + +choice + prompt "MX6 board select" + +config TARGET_SECOMX6 + bool "Support secomx6 boards" + select CPU_V7 + +endchoice + +config SYS_SOC + default "mx6" + +source "board/seco/Kconfig" + +endif diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig index 65da6e2..1f96498 100644 --- a/arch/arm/cpu/armv7/omap3/Kconfig +++ b/arch/arm/cpu/armv7/omap3/Kconfig @@ -106,12 +106,6 @@ config DM_GPIO config DM_SERIAL default y if DM -config SYS_MALLOC_F - default y if DM - -config SYS_MALLOC_F_LEN - default 0x400 if DM - config SYS_SOC default "omap3" diff --git a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c index 49f4032..c3e04af 100644 --- a/arch/arm/cpu/armv7/sunxi/clock_sun4i.c +++ b/arch/arm/cpu/armv7/sunxi/clock_sun4i.c @@ -100,22 +100,23 @@ static struct { unsigned int freq; } pll1_para[] = { /* This array must be ordered by frequency. */ - { PLL1_CFG(16, 0, 0, 0), 384000000 }, - { PLL1_CFG(16, 1, 0, 0), 768000000 }, - { PLL1_CFG(20, 1, 0, 0), 960000000 }, - { PLL1_CFG(21, 1, 0, 0), 1008000000}, - { PLL1_CFG(22, 1, 0, 0), 1056000000}, - { PLL1_CFG(23, 1, 0, 0), 1104000000}, - { PLL1_CFG(24, 1, 0, 0), 1152000000}, - { PLL1_CFG(25, 1, 0, 0), 1200000000}, - { PLL1_CFG(26, 1, 0, 0), 1248000000}, - { PLL1_CFG(27, 1, 0, 0), 1296000000}, - { PLL1_CFG(28, 1, 0, 0), 1344000000}, - { PLL1_CFG(29, 1, 0, 0), 1392000000}, - { PLL1_CFG(30, 1, 0, 0), 1440000000}, { PLL1_CFG(31, 1, 0, 0), 1488000000}, - /* Final catchall entry */ - { PLL1_CFG(31, 1, 0, 0), ~0}, + { PLL1_CFG(30, 1, 0, 0), 1440000000}, + { PLL1_CFG(29, 1, 0, 0), 1392000000}, + { PLL1_CFG(28, 1, 0, 0), 1344000000}, + { PLL1_CFG(27, 1, 0, 0), 1296000000}, + { PLL1_CFG(26, 1, 0, 0), 1248000000}, + { PLL1_CFG(25, 1, 0, 0), 1200000000}, + { PLL1_CFG(24, 1, 0, 0), 1152000000}, + { PLL1_CFG(23, 1, 0, 0), 1104000000}, + { PLL1_CFG(22, 1, 0, 0), 1056000000}, + { PLL1_CFG(21, 1, 0, 0), 1008000000}, + { PLL1_CFG(20, 1, 0, 0), 960000000 }, + { PLL1_CFG(19, 1, 0, 0), 912000000 }, + { PLL1_CFG(16, 1, 0, 0), 768000000 }, + /* Final catchall entry 384MHz*/ + { PLL1_CFG(16, 0, 0, 0), 0 }, + }; void clock_set_pll1(unsigned int hz) @@ -126,10 +127,12 @@ void clock_set_pll1(unsigned int hz) (struct sunxi_ccm_reg *)SUNXI_CCM_BASE; /* Find target frequency */ - while (pll1_para[i].freq < hz) + while (pll1_para[i].freq > hz) i++; hz = pll1_para[i].freq; + if (! hz) + hz = 384000000; /* Calculate system clock divisors */ axi = DIV_ROUND_UP(hz, 432000000); /* Max 450MHz */ diff --git a/arch/arm/cpu/armv7/sunxi/psci.S b/arch/arm/cpu/armv7/sunxi/psci.S index 5be497b..e0a524e 100644 --- a/arch/arm/cpu/armv7/sunxi/psci.S +++ b/arch/arm/cpu/armv7/sunxi/psci.S @@ -37,7 +37,7 @@ .arch_extension sec -#define ONE_MS (CONFIG_SYS_CLK_FREQ / 1000) +#define ONE_MS (CONFIG_TIMER_CLK_FREQ / 1000) #define TEN_MS (10 * ONE_MS) #define GICD_BASE 0x1c81000 #define GICC_BASE 0x1c82000 diff --git a/arch/arm/cpu/armv7/sunxi/usbc.c b/arch/arm/cpu/armv7/sunxi/usbc.c index 14de9f9..524f25c 100644 --- a/arch/arm/cpu/armv7/sunxi/usbc.c +++ b/arch/arm/cpu/armv7/sunxi/usbc.c @@ -182,6 +182,13 @@ static void sunxi_usb_passby(struct sunxi_usbc_hcd *sunxi_usbc, int enable) return; } +void sunxi_usbc_enable_squelch_detect(int index, int enable) +{ + struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index]; + + usb_phy_write(sunxi_usbc, 0x3c, enable ? 0 : 2, 2); +} + int sunxi_usbc_request_resources(int index) { struct sunxi_usbc_hcd *sunxi_usbc = &sunxi_usbc_hcd[index]; diff --git a/arch/arm/imx-common/Kconfig b/arch/arm/imx-common/Kconfig new file mode 100644 index 0000000..37b3752 --- /dev/null +++ b/arch/arm/imx-common/Kconfig @@ -0,0 +1,2 @@ +config IMX_CONFIG + string diff --git a/arch/arm/include/asm/arch-sunxi/usbc.h b/arch/arm/include/asm/arch-sunxi/usbc.h index cb538cd..1330733 100644 --- a/arch/arm/include/asm/arch-sunxi/usbc.h +++ b/arch/arm/include/asm/arch-sunxi/usbc.h @@ -20,3 +20,4 @@ void sunxi_usbc_enable(int index); void sunxi_usbc_disable(int index); void sunxi_usbc_vbus_enable(int index); void sunxi_usbc_vbus_disable(int index); +void sunxi_usbc_enable_squelch_detect(int index, int enable); diff --git a/arch/arm/include/asm/semihosting.h b/arch/arm/include/asm/semihosting.h deleted file mode 100644 index 835ca7e..0000000 --- a/arch/arm/include/asm/semihosting.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright 2014 Broadcom Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __SEMIHOSTING_H__ -#define __SEMIHOSTING_H__ - -/* - * ARM semihosting functions for loading images to memory. See the source - * code for more information. - */ -int smh_load(const char *fname, void *memp, int avail, int verbose); -long smh_len(const char *fname); - -#endif /* __SEMIHOSTING_H__ */ diff --git a/arch/arm/lib/semihosting.c b/arch/arm/lib/semihosting.c index fd6d857..c3e964e 100644 --- a/arch/arm/lib/semihosting.c +++ b/arch/arm/lib/semihosting.c @@ -13,7 +13,7 @@ * for them. */ #include <common.h> -#include <asm/semihosting.h> +#include <command.h> #define SYSOPEN 0x01 #define SYSCLOSE 0x02 @@ -26,7 +26,7 @@ /* * Call the handler */ -static long smh_trap(unsigned int sysnum, void *addr) +static noinline long smh_trap(unsigned int sysnum, void *addr) { register long result asm("r0"); #if defined(CONFIG_ARM64) @@ -144,93 +144,71 @@ static long smh_len_fd(long fd) return ret; } -/* - * Open, load a file into memory, and close it. Check that the available space - * is sufficient to store the entire file. Return the bytes actually read from - * the file as seen by the read function. The verbose flag enables some extra - * printing of successful read status. - */ -int smh_load(const char *fname, void *memp, int avail, int verbose) +static int smh_load_file(const char * const name, ulong load_addr, + ulong *end_addr) { - long ret; long fd; - size_t len; - - ret = -1; - - debug("%s: fname \'%s\', avail %u, memp %p\n", __func__, fname, - avail, memp); + long len; + long ret; - /* Open the file */ - fd = smh_open(fname, "rb"); + fd = smh_open(name, "rb"); if (fd == -1) return -1; - /* Get the file length */ - ret = smh_len_fd(fd); - if (ret == -1) { - smh_close(fd); - return -1; - } - - /* Check that the file will fit in the supplied buffer */ - if (ret > avail) { - printf("%s: ERROR ret %ld, avail %u\n", __func__, ret, - avail); + len = smh_len_fd(fd); + if (len < 0) { smh_close(fd); return -1; } - len = ret; + ret = smh_read(fd, (void *)load_addr, len); + smh_close(fd); - /* Read the file into the buffer */ - ret = smh_read(fd, memp, len); if (ret == 0) { - /* Print successful load information if requested */ - if (verbose) { - printf("\n%s\n", fname); - printf(" 0x%8p dest\n", memp); - printf(" 0x%08lx size\n", len); - printf(" 0x%08x avail\n", avail); - } + *end_addr = load_addr + len - 1; + printf("loaded file %s from %08lX to %08lX, %08lX bytes\n", + name, + load_addr, + *end_addr, + len); + } else { + printf("read failed\n"); + return 0; } - /* Close the file */ - smh_close(fd); - - return ret; + return 0; } -/* - * Get the file length from the filename - */ -long smh_len(const char *fname) +static int do_smhload(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - long ret; - long fd; - long len; - - debug("%s: file \'%s\'\n", __func__, fname); - - /* Open the file */ - fd = smh_open(fname, "rb"); - if (fd < 0) - return fd; - - /* Get the file length */ - len = smh_len_fd(fd); - if (len < 0) { - smh_close(fd); - return len; + if (argc == 3 || argc == 4) { + ulong load_addr; + ulong end_addr = 0; + ulong ret; + char end_str[64]; + + load_addr = simple_strtoul(argv[2], NULL, 16); + if (!load_addr) + return -1; + + ret = smh_load_file(argv[1], load_addr, &end_addr); + if (ret < 0) + return 1; + + /* Optionally save returned end to the environment */ + if (argc == 4) { + sprintf(end_str, "0x%08lx", end_addr); + setenv(argv[3], end_str); + } + } else { + return CMD_RET_USAGE; } - - /* Close the file */ - ret = smh_close(fd); - if (ret < 0) - return ret; - - debug("%s: returning len %ld\n", __func__, len); - - /* Return the file length (or -1 error indication) */ - return len; + return 0; } + +U_BOOT_CMD(smhload, 4, 0, do_smhload, "load a file using semihosting", + "<file> 0x<address> [end var]\n" + " - load a semihosted file to the address specified\n" + " if the optional [end var] is specified, the end\n" + " address of the file will be stored in this environment\n" + " variable.\n"); diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 30945c1..30c4e17 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -66,6 +66,7 @@ config TARGET_STAMP9G20 config TARGET_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK board" select CPU_ARM926EJS + select SUPPORT_SPL config TARGET_PM9G45 bool "Ronetix pm9g45 board" @@ -74,6 +75,7 @@ config TARGET_PM9G45 config TARGET_AT91SAM9N12EK bool "Atmel AT91SAM9N12-EK board" select CPU_ARM926EJS + select SUPPORT_SPL config TARGET_AT91SAM9RLEK bool "Atmel at91sam9rl reference board" @@ -82,6 +84,7 @@ config TARGET_AT91SAM9RLEK config TARGET_AT91SAM9X5EK bool "Atmel AT91SAM9X5-EK board" select CPU_ARM926EJS + select SUPPORT_SPL config TARGET_SAMA5D3_XPLAINED bool "SAMA5D3 Xplained board" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index e596ba6..0d3ee48 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -2,6 +2,8 @@ obj-$(CONFIG_AT91_WANTS_COMMON_PHY) += phy.o ifneq ($(CONFIG_SPL_BUILD),) obj-$(CONFIG_AT91SAM9G20) += sdram.o spl_at91.o obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o +obj-$(CONFIG_AT91SAM9N12) += mpddrc.o spl_at91.o +obj-$(CONFIG_AT91SAM9X5) += mpddrc.o spl_at91.o obj-$(CONFIG_SAMA5D3) += mpddrc.o spl_atmel.o obj-$(CONFIG_SAMA5D4) += mpddrc.o spl_atmel.o obj-y += spl.o diff --git a/arch/arm/mach-at91/arm926ejs/clock.c b/arch/arm/mach-at91/arm926ejs/clock.c index f363982..8d6934e 100644 --- a/arch/arm/mach-at91/arm926ejs/clock.c +++ b/arch/arm/mach-at91/arm926ejs/clock.c @@ -195,50 +195,52 @@ int at91_clock_init(unsigned long main_clock) void at91_plla_init(u32 pllar) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - int timeout = AT91_PLL_LOCK_TIMEOUT; writel(pllar, &pmc->pllar); - while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY))) { - timeout--; - if (timeout == 0) - break; - } + while (!(readl(&pmc->sr) & AT91_PMC_LOCKA)) + ; } void at91_pllb_init(u32 pllbr) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - int timeout = AT91_PLL_LOCK_TIMEOUT; writel(pllbr, &pmc->pllbr); - while (!(readl(&pmc->sr) & (AT91_PMC_LOCKB | AT91_PMC_MCKRDY))) { - timeout--; - if (timeout == 0) - break; - } + while (!(readl(&pmc->sr) & AT91_PMC_LOCKB)) + ; } void at91_mck_init(u32 mckr) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; - int timeout = AT91_PLL_LOCK_TIMEOUT; u32 tmp; tmp = readl(&pmc->mckr); - tmp &= ~(AT91_PMC_MCKR_PRES_MASK | - AT91_PMC_MCKR_MDIV_MASK | - AT91_PMC_MCKR_PLLADIV_MASK | - AT91_PMC_MCKR_CSS_MASK); - tmp |= mckr & (AT91_PMC_MCKR_PRES_MASK | - AT91_PMC_MCKR_MDIV_MASK | - AT91_PMC_MCKR_PLLADIV_MASK | - AT91_PMC_MCKR_CSS_MASK); + tmp &= ~AT91_PMC_MCKR_PRES_MASK; + tmp |= mckr & AT91_PMC_MCKR_PRES_MASK; writel(tmp, &pmc->mckr); + while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) + ; - while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) { - timeout--; - if (timeout == 0) - break; - } + tmp = readl(&pmc->mckr); + tmp &= ~AT91_PMC_MCKR_MDIV_MASK; + tmp |= mckr & AT91_PMC_MCKR_MDIV_MASK; + writel(tmp, &pmc->mckr); + while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) + ; + + tmp = readl(&pmc->mckr); + tmp &= ~AT91_PMC_MCKR_PLLADIV_MASK; + tmp |= mckr & AT91_PMC_MCKR_PLLADIV_MASK; + writel(tmp, &pmc->mckr); + while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) + ; + + tmp = readl(&pmc->mckr); + tmp &= ~AT91_PMC_MCKR_CSS_MASK; + tmp |= mckr & AT91_PMC_MCKR_CSS_MASK; + writel(tmp, &pmc->mckr); + while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY)) + ; } void at91_periph_clk_enable(int id) diff --git a/arch/arm/mach-at91/arm926ejs/timer.c b/arch/arm/mach-at91/arm926ejs/timer.c index b0b7fb9..31ce646 100644 --- a/arch/arm/mach-at91/arm926ejs/timer.c +++ b/arch/arm/mach-at91/arm926ejs/timer.c @@ -33,22 +33,6 @@ DECLARE_GLOBAL_DATA_PTR; #define TIMER_LOAD_VAL 0xfffff -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, gd->arch.timer_rate_hz); - - return tick; -} - -static inline unsigned long long usec_to_tick(unsigned long long usec) -{ - usec *= gd->arch.timer_rate_hz; - do_div(usec, 1000000); - - return usec; -} - /* * Use the PITC in full 32 bit incrementing mode */ @@ -64,54 +48,11 @@ int timer_init(void) writel(TIMER_LOAD_VAL | AT91_PIT_MR_EN , &pit->mr); gd->arch.timer_rate_hz = gd->arch.mck_rate_hz / 16; - gd->arch.tbu = gd->arch.tbl = 0; return 0; } /* - * Get the current 64 bit timer tick count - */ -unsigned long long get_ticks(void) -{ - at91_pit_t *pit = (at91_pit_t *) ATMEL_BASE_PIT; - - ulong now = readl(&pit->piir); - - /* increment tbu if tbl has rolled over */ - if (now < gd->arch.tbl) - gd->arch.tbu++; - gd->arch.tbl = now; - return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; -} - -void __udelay(unsigned long usec) -{ - unsigned long long start; - ulong tmo; - - start = get_ticks(); /* get current timestamp */ - tmo = usec_to_tick(usec); /* convert usecs to ticks */ - while ((get_ticks() - start) < tmo) - ; /* loop till time has passed */ -} - -/* - * get_timer(base) can be used to check for timeouts or - * to measure elasped time relative to an event: - * - * ulong start_time = get_timer(0) sets start_time to the current - * time value. - * get_timer(start_time) returns the time elapsed since then. - * - * The time is used in CONFIG_SYS_HZ units! - */ -ulong get_timer(ulong base) -{ - return tick_to_time(get_ticks()) - base; -} - -/* * Return the number of timer ticks per second. */ ulong get_tbclk(void) diff --git a/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds b/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds new file mode 100644 index 0000000..acadd1d --- /dev/null +++ b/arch/arm/mach-at91/arm926ejs/u-boot-spl.lds @@ -0,0 +1,48 @@ +/* + * Copyright (C) 2015 Atmel Corporation + * Bo Shen <voice.shen@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE, \ + LENGTH = CONFIG_SPL_MAX_SIZE } +MEMORY { .sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, \ + LENGTH = CONFIG_SPL_BSS_MAX_SIZE } + +OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") +OUTPUT_ARCH(arm) +ENTRY(_start) +SECTIONS +{ + .text : + { + __start = .; + *(.vectors) + arch/arm/cpu/arm926ejs/start.o (.text*) + *(.text*) + } >.sram + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram + + . = ALIGN(4); + __image_copy_end = .; + + .end : + { + *(.__end) + } >.sram + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end = .; + } >.sdram +} diff --git a/arch/arm/mach-at91/armv7/timer.c b/arch/arm/mach-at91/armv7/timer.c index 19bf80b..a4a3817 100644 --- a/arch/arm/mach-at91/armv7/timer.c +++ b/arch/arm/mach-at91/armv7/timer.c @@ -36,22 +36,6 @@ DECLARE_GLOBAL_DATA_PTR; #define TIMER_LOAD_VAL 0xfffff -static inline unsigned long long tick_to_time(unsigned long long tick) -{ - tick *= CONFIG_SYS_HZ; - do_div(tick, gd->arch.timer_rate_hz); - - return tick; -} - -static inline unsigned long long usec_to_tick(unsigned long long usec) -{ - usec *= gd->arch.timer_rate_hz; - do_div(usec, 1000000); - - return usec; -} - /* * Use the PITC in full 32 bit incrementing mode */ @@ -67,55 +51,10 @@ int timer_init(void) gd->arch.timer_rate_hz = get_pit_clk_rate() / 16; - gd->arch.tbu = 0; - gd->arch.tbl = 0; - return 0; } /* - * Get the current 64 bit timer tick count - */ -unsigned long long get_ticks(void) -{ - at91_pit_t *pit = (at91_pit_t *)ATMEL_BASE_PIT; - - ulong now = readl(&pit->piir); - - /* increment tbu if tbl has rolled over */ - if (now < gd->arch.tbl) - gd->arch.tbu++; - gd->arch.tbl = now; - return (((unsigned long long)gd->arch.tbu) << 32) | gd->arch.tbl; -} - -void __udelay(unsigned long usec) -{ - unsigned long long start; - ulong tmo; - - start = get_ticks(); /* get current timestamp */ - tmo = usec_to_tick(usec); /* convert usecs to ticks */ - while ((get_ticks() - start) < tmo) - ; /* loop till time has passed */ -} - -/* - * get_timer(base) can be used to check for timeouts or - * to measure elasped time relative to an event: - * - * ulong start_time = get_timer(0) sets start_time to the current - * time value. - * get_timer(start_time) returns the time elapsed since then. - * - * The time is used in CONFIG_SYS_HZ units! - */ -ulong get_timer(ulong base) -{ - return tick_to_time(get_ticks()) - base; -} - -/* * Return the number of timer ticks per second. */ ulong get_tbclk(void) diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h index 65691ab..ebb7dec 100644 --- a/arch/arm/mach-at91/include/mach/at91_pmc.h +++ b/arch/arm/mach-at91/include/mach/at91_pmc.h @@ -97,7 +97,8 @@ typedef struct at91_pmc { #define AT91_PMC_MCKR_CSS_PLLB 0x00000003 #define AT91_PMC_MCKR_CSS_MASK 0x00000003 -#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4) +#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4) || \ + defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12) #define AT91_PMC_MCKR_PRES_1 0x00000000 #define AT91_PMC_MCKR_PRES_2 0x00000010 #define AT91_PMC_MCKR_PRES_4 0x00000020 @@ -126,7 +127,8 @@ typedef struct at91_pmc { #else #define AT91_PMC_MCKR_MDIV_1 0x00000000 #define AT91_PMC_MCKR_MDIV_2 0x00000100 -#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4) +#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4) || \ + defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12) #define AT91_PMC_MCKR_MDIV_3 0x00000300 #endif #define AT91_PMC_MCKR_MDIV_4 0x00000200 diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 8950d67..1a4e84b 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -133,6 +133,9 @@ #define ATMEL_BASE_CS6 0x70000000 #define ATMEL_BASE_CS7 0x80000000 +/* Timer */ +#define CONFIG_SYS_TIMER_COUNTER 0xfffffd3c + /* * Other misc defines */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 6dfcf4c..914a3b0 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -117,6 +117,9 @@ #define ATMEL_BASE_CS6 0x70000000 #define ATMEL_BASE_CS7 0x80000000 +/* Timer */ +#define CONFIG_SYS_TIMER_COUNTER 0xfffffd3c + /* * Other misc defines */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index 64a3888..71675ab 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -132,6 +132,9 @@ #define ATMEL_BASE_CS6 0x70000000 #define ATMEL_BASE_CS7 0x80000000 +/* Timer */ +#define CONFIG_SYS_TIMER_COUNTER 0xfffffd3c + /* * Other misc defines */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index 6df8cdb..cf1c73f 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -136,6 +136,9 @@ #define ATMEL_BASE_CS6 0x70000000 #define ATMEL_BASE_CS7 0x80000000 +/* Timer */ +#define CONFIG_SYS_TIMER_COUNTER 0xfffffd3c + /* * Other misc defines */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 3a8e6d6..70bbf4e 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -116,6 +116,9 @@ #define ATMEL_BASE_CS4 0x50000000 /* Compact Flash Slot 0 */ #define ATMEL_BASE_CS5 0x60000000 /* Compact Flash Slot 1 */ +/* Timer */ +#define CONFIG_SYS_TIMER_COUNTER 0xfffffd3c + /* * Other misc defines */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9x5.h b/arch/arm/mach-at91/include/mach/at91sam9x5.h index 36a5cdf..8100ebe 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9x5.h +++ b/arch/arm/mach-at91/include/mach/at91sam9x5.h @@ -124,6 +124,16 @@ #define ATMEL_BASE_EHCI 0x00700000 /* USB Host controller (EHCI) */ #endif +/* + * External memory + */ +#define ATMEL_BASE_CS0 0x10000000 +#define ATMEL_BASE_CS1 0x20000000 +#define ATMEL_BASE_CS2 0x30000000 +#define ATMEL_BASE_CS3 0x40000000 +#define ATMEL_BASE_CS4 0x50000000 +#define ATMEL_BASE_CS5 0x60000000 + /* 9x5 series chip id definitions */ #define ARCH_ID_AT91SAM9X5 0x819a05a0 #define ARCH_ID_VERSION_MASK 0x1f @@ -154,6 +164,9 @@ #define ATMEL_CPU_NAME get_cpu_name() #endif +/* Timer */ +#define CONFIG_SYS_TIMER_COUNTER 0xfffffe3c + /* * Other misc defines */ diff --git a/arch/arm/mach-at91/include/mach/sama5d3.h b/arch/arm/mach-at91/include/mach/sama5d3.h index 227ba80..b749cb3 100644 --- a/arch/arm/mach-at91/include/mach/sama5d3.h +++ b/arch/arm/mach-at91/include/mach/sama5d3.h @@ -189,6 +189,9 @@ #define PIO_SCDR_DIV 0x3fff #define CPU_HAS_PCR +/* Timer */ +#define CONFIG_SYS_TIMER_COUNTER 0xfffffe3c + /* * PMECC table in ROM */ diff --git a/arch/arm/mach-at91/include/mach/sama5d4.h b/arch/arm/mach-at91/include/mach/sama5d4.h index f30cb5f..7773ace 100644 --- a/arch/arm/mach-at91/include/mach/sama5d4.h +++ b/arch/arm/mach-at91/include/mach/sama5d4.h @@ -193,6 +193,9 @@ #define cpu_is_sama5d44() (cpu_is_sama5d4() && \ (get_extension_chip_id() == ARCH_EXID_SAMA5D44)) +/* Timer */ +#define CONFIG_SYS_TIMER_COUNTER 0xfc06863c + /* * No PMECC Galois table in ROM */ diff --git a/arch/arm/mach-at91/mpddrc.c b/arch/arm/mach-at91/mpddrc.c index beec13d..e2b6a49 100644 --- a/arch/arm/mach-at91/mpddrc.c +++ b/arch/arm/mach-at91/mpddrc.c @@ -19,7 +19,8 @@ static inline void atmel_mpddr_op(int mode, u32 ram_address) static int ddr2_decodtype_is_seq(u32 cr) { -#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4) +#if defined(CONFIG_SAMA5D3) || defined(CONFIG_SAMA5D4) || \ + defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12) if (cr & ATMEL_MPDDRC_CR_DECOD_INTERLEAVED) return 0; #endif diff --git a/arch/arm/mach-at91/spl.c b/arch/arm/mach-at91/spl.c index aaa5eec..27a405a 100644 --- a/arch/arm/mach-at91/spl.c +++ b/arch/arm/mach-at91/spl.c @@ -29,7 +29,7 @@ u32 spl_boot_device(void) return BOOT_DEVICE_MMC1; #elif CONFIG_SYS_USE_NANDFLASH return BOOT_DEVICE_NAND; -#elif CONFIG_SYS_USE_SERIALFLASH +#elif CONFIG_SYS_USE_SERIALFLASH || CONFIG_SYS_USE_SPIFLASH return BOOT_DEVICE_SPI; #endif return BOOT_DEVICE_NONE; diff --git a/arch/arm/mach-at91/spl_at91.c b/arch/arm/mach-at91/spl_at91.c index 89f588b..a79a9dc 100644 --- a/arch/arm/mach-at91/spl_at91.c +++ b/arch/arm/mach-at91/spl_at91.c @@ -71,7 +71,11 @@ void __weak at91_spl_board_init(void) { } -void spl_board_init(void) +void __weak spl_board_init(void) +{ +} + +void board_init_f(ulong dummy) { struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; @@ -111,9 +115,14 @@ void spl_board_init(void) timer_init(); /* enable clocks for all PIOs */ +#if defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12) + at91_periph_clk_enable(ATMEL_ID_PIOAB); + at91_periph_clk_enable(ATMEL_ID_PIOCD); +#else at91_periph_clk_enable(ATMEL_ID_PIOA); at91_periph_clk_enable(ATMEL_ID_PIOB); at91_periph_clk_enable(ATMEL_ID_PIOC); +#endif /* init console */ at91_seriald_hw_init(); preloader_console_init(); diff --git a/arch/arm/mach-at91/spl_atmel.c b/arch/arm/mach-at91/spl_atmel.c index 9cc1111..8ac5335 100644 --- a/arch/arm/mach-at91/spl_atmel.c +++ b/arch/arm/mach-at91/spl_atmel.c @@ -70,8 +70,13 @@ __weak void redirect_int_from_saic_to_aic(void) /* This only be used for sama5d4 soc now */ } +/* empty stub to satisfy current lowlevel_init, can be removed any time */ void s_init(void) { +} + +void board_init_f(ulong dummy) +{ switch_to_main_crystal_osc(); /* disable watchdog */ @@ -93,4 +98,9 @@ void s_init(void) preloader_console_init(); mem_init(); + + /* Clear the BSS. */ + memset(__bss_start, 0, __bss_end - __bss_start); + + board_init_r(NULL, 0); } diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig new file mode 100644 index 0000000..b43f2d9 --- /dev/null +++ b/arch/arm/mach-bcm283x/Kconfig @@ -0,0 +1,40 @@ +menu "Broadcom BCM283X family" + depends on ARCH_BCM283X + +choice + prompt "Broadcom BCM283X board select" + +config TARGET_RPI + bool "Raspberry Pi" + select CPU_ARM1176 + +config TARGET_RPI_2 + bool "Raspberry Pi 2" + select CPU_V7 + +endchoice + +config DM + default y + +config DM_SERIAL + default y + +config DM_GPIO + default y + +config SYS_BOARD + default "rpi" if TARGET_RPI + default "rpi_2" if TARGET_RPI_2 + +config SYS_VENDOR + default "raspberrypi" + +config SYS_SOC + default "bcm283x" + +config SYS_CONFIG_NAME + default "rpi" if TARGET_RPI + default "rpi_2" if TARGET_RPI_2 + +endmenu diff --git a/arch/arm/cpu/arm1176/bcm2835/Makefile b/arch/arm/mach-bcm283x/Makefile index 7e5dbe1..2505428 100644 --- a/arch/arm/cpu/arm1176/bcm2835/Makefile +++ b/arch/arm/mach-bcm283x/Makefile @@ -4,5 +4,5 @@ # SPDX-License-Identifier: GPL-2.0 # -obj-y := lowlevel_init.o +obj-$(CONFIG_TARGET_RPI) += lowlevel_init.o obj-y += init.o reset.o timer.o mbox.o diff --git a/arch/arm/include/asm/arch-bcm2835/gpio.h b/arch/arm/mach-bcm283x/include/mach/gpio.h index c8ef8f5..c8ef8f5 100644 --- a/arch/arm/include/asm/arch-bcm2835/gpio.h +++ b/arch/arm/mach-bcm283x/include/mach/gpio.h diff --git a/arch/arm/include/asm/arch-bcm2835/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h index 04bf480..04bf480 100644 --- a/arch/arm/include/asm/arch-bcm2835/mbox.h +++ b/arch/arm/mach-bcm283x/include/mach/mbox.h diff --git a/arch/arm/include/asm/arch-bcm2835/sdhci.h b/arch/arm/mach-bcm283x/include/mach/sdhci.h index 2a21ccb..2a21ccb 100644 --- a/arch/arm/include/asm/arch-bcm2835/sdhci.h +++ b/arch/arm/mach-bcm283x/include/mach/sdhci.h diff --git a/arch/arm/include/asm/arch-bcm2835/timer.h b/arch/arm/mach-bcm283x/include/mach/timer.h index fc7aec7..fc7aec7 100644 --- a/arch/arm/include/asm/arch-bcm2835/timer.h +++ b/arch/arm/mach-bcm283x/include/mach/timer.h diff --git a/arch/arm/include/asm/arch-bcm2835/wdog.h b/arch/arm/mach-bcm283x/include/mach/wdog.h index beb6a08..beb6a08 100644 --- a/arch/arm/include/asm/arch-bcm2835/wdog.h +++ b/arch/arm/mach-bcm283x/include/mach/wdog.h diff --git a/arch/arm/cpu/arm1176/bcm2835/init.c b/arch/arm/mach-bcm283x/init.c index e90d3bb..e90d3bb 100644 --- a/arch/arm/cpu/arm1176/bcm2835/init.c +++ b/arch/arm/mach-bcm283x/init.c diff --git a/arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S b/arch/arm/mach-bcm283x/lowlevel_init.S index c7b0843..c7b0843 100644 --- a/arch/arm/cpu/arm1176/bcm2835/lowlevel_init.S +++ b/arch/arm/mach-bcm283x/lowlevel_init.S diff --git a/arch/arm/cpu/arm1176/bcm2835/mbox.c b/arch/arm/mach-bcm283x/mbox.c index 3b17a31..3b17a31 100644 --- a/arch/arm/cpu/arm1176/bcm2835/mbox.c +++ b/arch/arm/mach-bcm283x/mbox.c diff --git a/arch/arm/cpu/arm1176/bcm2835/reset.c b/arch/arm/mach-bcm283x/reset.c index 8c37ad9..8c37ad9 100644 --- a/arch/arm/cpu/arm1176/bcm2835/reset.c +++ b/arch/arm/mach-bcm283x/reset.c diff --git a/arch/arm/cpu/arm1176/bcm2835/timer.c b/arch/arm/mach-bcm283x/timer.c index 017907c..017907c 100644 --- a/arch/arm/cpu/arm1176/bcm2835/timer.c +++ b/arch/arm/mach-bcm283x/timer.c diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index fccfd79..fce1c1d 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -17,9 +17,6 @@ config TEGRA124 endchoice -config SYS_MALLOC_F - default y - config SYS_MALLOC_F_LEN default 0x1800 diff --git a/arch/arm/mach-uniphier/Kconfig b/arch/arm/mach-uniphier/Kconfig index 73f2659..288e6ab 100644 --- a/arch/arm/mach-uniphier/Kconfig +++ b/arch/arm/mach-uniphier/Kconfig @@ -45,12 +45,6 @@ config DCC_MICRO_SUPPORT_CARD endchoice -config SYS_MALLOC_F - default y - -config SYS_MALLOC_F_LEN - default 0x400 - config CMD_PINMON bool "Enable boot mode pins monitor command" default y diff --git a/arch/avr32/config.mk b/arch/avr32/config.mk index 8252f59..469185e 100644 --- a/arch/avr32/config.mk +++ b/arch/avr32/config.mk @@ -9,9 +9,6 @@ ifeq ($(CROSS_COMPILE),) CROSS_COMPILE := avr32-linux- endif -# avr32 has generic board support -__HAVE_ARCH_GENERIC_BOARD := y - CONFIG_STANDALONE_LOAD_ADDR ?= 0x00000000 PLATFORM_RELFLAGS += -ffixed-r5 -fPIC -mno-init-got -mrelax diff --git a/arch/blackfin/config.mk b/arch/blackfin/config.mk index 584b38b..7b17b75 100644 --- a/arch/blackfin/config.mk +++ b/arch/blackfin/config.mk @@ -20,9 +20,6 @@ CONFIG_BFIN_CPU := $(strip $(CONFIG_BFIN_CPU:"%"=%)) endif CONFIG_BFIN_BOOT_MODE := $(strip $(CONFIG_BFIN_BOOT_MODE:"%"=%)) -# Support generic board on Blackfin -__HAVE_ARCH_GENERIC_BOARD := y - PLATFORM_RELFLAGS += -ffixed-P3 -fomit-frame-pointer -mno-fdpic LDFLAGS_FINAL += --gc-sections diff --git a/arch/blackfin/include/asm/config.h b/arch/blackfin/include/asm/config.h index 73cbfa2..d2cf71b 100644 --- a/arch/blackfin/include/asm/config.h +++ b/arch/blackfin/include/asm/config.h @@ -174,7 +174,6 @@ } #endif -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_CPUINFO #define CONFIG_ARCH_MISC_INIT diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index 53c4aab..69cb0f7 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -4,71 +4,200 @@ menu "M68000 architecture" config SYS_ARCH default "m68k" +# processor family +config MCF520x + bool + +config MCF52x2 + bool + +config MCF523x + bool + +config MCF530x + bool + +config MCF5301x + bool + +config MCF532x + bool + +config MCF537x + bool + +config MCF5441x + bool + +config MCF5445x + bool + +config MCF5227x + bool + +config MCF547x_8x + bool + +# processor type +config M5208 + bool + select MCF520x + +config M5235 + bool + select MCF523x + +config M5249 + bool + select MCF52x2 + +config M5253 + bool + select MCF52x2 + +config M5271 + bool + select MCF52x2 + +config M5272 + bool + select MCF52x2 + +config M5275 + bool + select MCF52x2 + +config M5282 + bool + select MCF52x2 + +config M5307 + bool + select MCF530x + +config M53015 + bool + select MCF5301x + +config M5329 + bool + select MCF532x + +config M5373 + bool + select MCF532x + select MCF537x + +config M54418 + bool + select MCF5441x + +config M54451 + bool + select MCF5445x + +config M54455 + bool + select MCF5445x + +config M52277 + bool + select MCF5227x + +config M547x + bool + select MCF547x_8x + +config M548x + bool + select MCF547x_8x + choice prompt "Target select" config TARGET_M52277EVB bool "Support M52277EVB" + select M52277 config TARGET_M5235EVB bool "Support M5235EVB" + select M5235 config TARGET_COBRA5272 bool "Support cobra5272" + select M5272 config TARGET_EB_CPU5282 bool "Support eb_cpu5282" + select M5282 config TARGET_M5208EVBE bool "Support M5208EVBE" + select M5208 config TARGET_M5249EVB bool "Support M5249EVB" + select M5249 config TARGET_M5253DEMO bool "Support M5253DEMO" + select M5253 config TARGET_M5253EVBE bool "Support M5253EVBE" + select M5253 config TARGET_M5272C3 bool "Support M5272C3" + select M5272 config TARGET_M5275EVB bool "Support M5275EVB" + select M5275 config TARGET_M5282EVB bool "Support M5282EVB" + select M5282 config TARGET_ASTRO_MCF5373L bool "Support astro_mcf5373l" + select M5373 config TARGET_M53017EVB bool "Support M53017EVB" + select M53015 config TARGET_M5329EVB bool "Support M5329EVB" + select M5329 config TARGET_M5373EVB bool "Support M5373EVB" + select M5373 config TARGET_M54418TWR bool "Support M54418TWR" + select M54418 config TARGET_M54451EVB bool "Support M54451EVB" + select M54451 config TARGET_M54455EVB bool "Support M54455EVB" + select M54455 config TARGET_M5475EVB bool "Support M5475EVB" + select M547x config TARGET_M5485EVB bool "Support M5485EVB" + select M548x config TARGET_AMCORE bool "Support AMCORE" + select M5307 endchoice diff --git a/arch/m68k/Makefile b/arch/m68k/Makefile index aa3d2fa..e6f3b48 100644 --- a/arch/m68k/Makefile +++ b/arch/m68k/Makefile @@ -6,3 +6,32 @@ head-y := arch/m68k/cpu/$(CPU)/start.o libs-y += arch/m68k/cpu/$(CPU)/ libs-y += arch/m68k/lib/ + +cpuflags-$(CONFIG_M5208) := -mcpu=5208 +cpuflags-$(CONFIG_M5235) := -mcpu=5235 -fPIC +cpuflags-$(CONFIG_M52277) := -mcpu=52277 -fPIC +cpuflags-$(CONFIG_M5249) := -mcpu=5249 +cpuflags-$(CONFIG_M5253) := -mcpu=5253 +cpuflags-$(CONFIG_M5271) := -mcpu=5271 +cpuflags-$(CONFIG_M5272) := -mcpu=5272 +cpuflags-$(CONFIG_M5275) := -mcpu=5275 +cpuflags-$(CONFIG_M5282) := -mcpu=5282 +cpuflags-$(CONFIG_M5307) := -mcpu=5307 +cpuflags-$(CONFIG_MCF5301x) := -mcpu=53015 -fPIC +cpuflags-$(CONFIG_MCF532x) := -mcpu=5329 -fPIC +cpuflags-$(CONFIG_MCF5441x) := -mcpu=54418 -fPIC +cpuflags-$(CONFIG_MCF5445x) := -mcpu=54455 -fPIC +cpuflags-$(CONFIG_MCF547x_8x) := -mcpu=5485 -fPIC + +PLATFORM_CPPFLAGS += $(cpuflags-y) + + +ldflags-$(CONFIG_MCF5441x) := --got=single +ldflags-$(CONFIG_MCF5445x) := --got=single +ldflags-$(CONFIG_MCF547x_8x) := --got=single + +ifneq (,$(findstring -linux-,$(shell $(CC) --version))) +ifneq (,$(findstring GOT,$(shell $(LD) --help))) +PLATFORM_LDFLAGS += $(ldflags-y) +endif +endif diff --git a/arch/m68k/config.mk b/arch/m68k/config.mk index a629b68..3b3a7e8 100644 --- a/arch/m68k/config.mk +++ b/arch/m68k/config.mk @@ -11,9 +11,6 @@ endif CONFIG_STANDALONE_LOAD_ADDR ?= 0x20000 -# Support generic board on m68k -__HAVE_ARCH_GENERIC_BOARD := y - PLATFORM_CPPFLAGS += -D__M68K__ PLATFORM_LDFLAGS += -n PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections diff --git a/arch/m68k/cpu/mcf5227x/config.mk b/arch/m68k/cpu/mcf5227x/config.mk deleted file mode 100644 index b5c26e4..0000000 --- a/arch/m68k/cpu/mcf5227x/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -mcpu=52277 -fPIC diff --git a/arch/m68k/cpu/mcf523x/config.mk b/arch/m68k/cpu/mcf523x/config.mk deleted file mode 100644 index c9435ab..0000000 --- a/arch/m68k/cpu/mcf523x/config.mk +++ /dev/null @@ -1,10 +0,0 @@ -# -# (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -mcpu=5235 -fPIC diff --git a/arch/m68k/cpu/mcf52x2/config.mk b/arch/m68k/cpu/mcf52x2/config.mk deleted file mode 100644 index f66000b..0000000 --- a/arch/m68k/cpu/mcf52x2/config.mk +++ /dev/null @@ -1,39 +0,0 @@ -# -# (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -cfg=$(srctree)/include/configs/$(CONFIG_SYS_CONFIG_NAME:"%"=%).h -is5208:=$(shell grep CONFIG_M5208 $(cfg)) -is5249:=$(shell grep CONFIG_M5249 $(cfg)) -is5253:=$(shell grep CONFIG_M5253 $(cfg)) -is5271:=$(shell grep CONFIG_M5271 $(cfg)) -is5272:=$(shell grep CONFIG_M5272 $(cfg)) -is5275:=$(shell grep CONFIG_M5275 $(cfg)) -is5282:=$(shell grep CONFIG_M5282 $(cfg)) - -ifneq (,$(findstring CONFIG_M5208,$(is5208))) -PLATFORM_CPPFLAGS += -mcpu=5208 -endif -ifneq (,$(findstring CONFIG_M5249,$(is5249))) -PLATFORM_CPPFLAGS += -mcpu=5249 -endif -ifneq (,$(findstring CONFIG_M5253,$(is5253))) -PLATFORM_CPPFLAGS += -mcpu=5253 -endif -ifneq (,$(findstring CONFIG_M5271,$(is5271))) -PLATFORM_CPPFLAGS += -mcpu=5271 -endif -ifneq (,$(findstring CONFIG_M5272,$(is5272))) -PLATFORM_CPPFLAGS += -mcpu=5272 -endif -ifneq (,$(findstring CONFIG_M5275,$(is5275))) -PLATFORM_CPPFLAGS += -mcpu=5275 -endif -ifneq (,$(findstring CONFIG_M5282,$(is5282))) -PLATFORM_CPPFLAGS += -mcpu=5282 -endif diff --git a/arch/m68k/cpu/mcf530x/config.mk b/arch/m68k/cpu/mcf530x/config.mk deleted file mode 100644 index aef72d7..0000000 --- a/arch/m68k/cpu/mcf530x/config.mk +++ /dev/null @@ -1,12 +0,0 @@ -# -# (C) Copyright 2014 Angelo Dureghello <angelo@sysam.it> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -cfg=$(srctree)/include/configs/$(CONFIG_SYS_CONFIG_NAME:"%"=%).h -is5307:=$(shell grep CONFIG_M5307 $(cfg)) - -ifneq (,$(findstring CONFIG_M5307,$(is5307))) -PLATFORM_CPPFLAGS += -mcpu=5307 -endif diff --git a/arch/m68k/cpu/mcf532x/config.mk b/arch/m68k/cpu/mcf532x/config.mk deleted file mode 100644 index 2efb60f..0000000 --- a/arch/m68k/cpu/mcf532x/config.mk +++ /dev/null @@ -1,19 +0,0 @@ -# -# (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -cfg=$(srctree)/include/configs/$(CONFIG_SYS_CONFIG_NAME:"%"=%).h -is5301x:=$(shell grep CONFIG_MCF5301x $(cfg)) -is532x:=$(shell grep CONFIG_MCF532x $(cfg)) - -ifneq (,$(findstring CONFIG_MCF5301x,$(is5301x))) -PLATFORM_CPPFLAGS += -mcpu=53015 -fPIC -endif -ifneq (,$(findstring CONFIG_MCF532x,$(is532x))) -PLATFORM_CPPFLAGS += -mcpu=5329 -fPIC -endif diff --git a/arch/m68k/cpu/mcf5445x/config.mk b/arch/m68k/cpu/mcf5445x/config.mk deleted file mode 100644 index 13f8a9f..0000000 --- a/arch/m68k/cpu/mcf5445x/config.mk +++ /dev/null @@ -1,25 +0,0 @@ -# -# (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# Copyright 2011-2012 Freescale Semiconductor, Inc. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -cfg=$(srctree)/include/configs/$(CONFIG_SYS_CONFIG_NAME:"%"=%).h -is5441x:=$(shell grep CONFIG_MCF5441x $(cfg)) - -ifneq (,$(findstring CONFIG_MCF5441x,$(is5441x))) -PLATFORM_CPPFLAGS += -mcpu=54418 -fPIC -else -PLATFORM_CPPFLAGS += -mcpu=54455 -fPIC -endif - -ifneq (,$(findstring -linux-,$(shell $(CC) --version))) -ifneq (,$(findstring GOT,$(shell $(LD) --help))) -PLATFORM_LDFLAGS += --got=single -endif -endif diff --git a/arch/m68k/cpu/mcf547x_8x/config.mk b/arch/m68k/cpu/mcf547x_8x/config.mk deleted file mode 100644 index 825f6cc..0000000 --- a/arch/m68k/cpu/mcf547x_8x/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2003 Josef Baumgartner <josef.baumgartner@telex.de> -# -# (C) Copyright 2000-2004 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -mcpu=5485 -fPIC - -ifneq (,$(findstring -linux-,$(shell $(CC) --version))) -ifneq (,$(findstring GOT,$(shell $(LD) --help))) -PLATFORM_LDFLAGS += --got=single -endif -endif diff --git a/arch/m68k/include/asm/config.h b/arch/m68k/include/asm/config.h index 7590842..e1458ac 100644 --- a/arch/m68k/include/asm/config.h +++ b/arch/m68k/include/asm/config.h @@ -7,7 +7,6 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_GENERIC_GLOBAL_DATA #define CONFIG_NEEDS_MANUAL_RELOC diff --git a/arch/m68k/lib/Makefile b/arch/m68k/lib/Makefile index d0e1a84..73d40bd 100644 --- a/arch/m68k/lib/Makefile +++ b/arch/m68k/lib/Makefile @@ -5,9 +5,6 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifndef CONFIG_SYS_GENERIC_BOARD -obj-y += board.o -endif obj-$(CONFIG_CMD_BOOTM) += bootm.o obj-y += cache.o obj-y += interrupts.o diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c deleted file mode 100644 index 9caff73..0000000 --- a/arch/m68k/lib/board.c +++ /dev/null @@ -1,642 +0,0 @@ -/* - * (C) Copyright 2003 - * Josef Baumgartner <josef.baumgartner@telex.de> - * - * (C) Copyright 2000-2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <watchdog.h> -#include <command.h> -#include <malloc.h> -#include <stdio_dev.h> -#include <linux/compiler.h> - -#include <asm/immap.h> - -#if defined(CONFIG_CMD_IDE) -#include <ide.h> -#endif -#if defined(CONFIG_CMD_SCSI) -#include <scsi.h> -#endif -#if defined(CONFIG_CMD_KGDB) -#include <kgdb.h> -#endif -#ifdef CONFIG_STATUS_LED -#include <status_led.h> -#endif -#include <net.h> -#include <serial.h> -#ifdef CONFIG_SYS_ALLOC_DPRAM -#include <commproc.h> -#endif -#include <version.h> - -#if defined(CONFIG_HARD_I2C) || \ - defined(CONFIG_SYS_I2C) -#include <i2c.h> -#endif - -#ifdef CONFIG_CMD_SPI -#include <spi.h> -#endif - -#ifdef CONFIG_BITBANGMII -#include <miiphy.h> -#endif - -#include <nand.h> - -DECLARE_GLOBAL_DATA_PTR; - -static char *failed = "*** failed ***\n"; - -#include <environment.h> - -extern ulong __init_end; -extern ulong __bss_end; - -#if defined(CONFIG_WATCHDOG) -# undef INIT_FUNC_WATCHDOG_INIT -# define INIT_FUNC_WATCHDOG_INIT watchdog_init, -# define WATCHDOG_DISABLE watchdog_disable - -extern int watchdog_init(void); -extern int watchdog_disable(void); -#else -# define INIT_FUNC_WATCHDOG_INIT /* undef */ -# define WATCHDOG_DISABLE /* undef */ -#endif /* CONFIG_WATCHDOG */ - -ulong monitor_flash_len; - -/************************************************************************ - * Utilities * - ************************************************************************ - */ - -/* - * All attempts to come up with a "common" initialization sequence - * that works for all boards and architectures failed: some of the - * requirements are just _too_ different. To get rid of the resulting - * mess of board dependend #ifdef'ed code we now make the whole - * initialization sequence configurable to the user. - * - * The requirements for any new initalization function is simple: it - * receives a pointer to the "global data" structure as it's only - * argument, and returns an integer return code, where 0 means - * "continue" and != 0 means "fatal error, hang the system". - */ -typedef int (init_fnc_t) (void); - -/************************************************************************ - * Init Utilities - ************************************************************************ - * Some of this code should be moved into the core functions, - * but let's get it working (again) first... - */ - -static int init_baudrate (void) -{ - gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE); - return 0; -} - -/***********************************************************************/ - -static int init_func_ram (void) -{ - int board_type = 0; /* use dummy arg */ - puts ("DRAM: "); - - if ((gd->ram_size = initdram (board_type)) > 0) { - print_size (gd->ram_size, "\n"); - return (0); - } - puts (failed); - return (1); -} - -/***********************************************************************/ - -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C) -static int init_func_i2c (void) -{ - puts ("I2C: "); -#ifdef CONFIG_SYS_I2C - i2c_init_all(); -#else - i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); -#endif - puts ("ready\n"); - return (0); -} -#endif - -#if defined(CONFIG_HARD_SPI) -static int init_func_spi (void) -{ - puts ("SPI: "); - spi_init (); - puts ("ready\n"); - return (0); -} -#endif - -/***********************************************************************/ - -/************************************************************************ - * Initialization sequence * - ************************************************************************ - */ - -init_fnc_t *init_sequence[] = { - get_clocks, - env_init, - init_baudrate, - serial_init, - console_init_f, - display_options, - checkcpu, - checkboard, -#if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C) - init_func_i2c, -#endif -#if defined(CONFIG_HARD_SPI) - init_func_spi, -#endif - init_func_ram, -#if defined(CONFIG_SYS_DRAM_TEST) - testdram, -#endif /* CONFIG_SYS_DRAM_TEST */ - INIT_FUNC_WATCHDOG_INIT - NULL, /* Terminate this list */ -}; - - -/************************************************************************ - * - * This is the first part of the initialization sequence that is - * implemented in C, but still running from ROM. - * - * The main purpose is to provide a (serial) console interface as - * soon as possible (so we can see any error messages), and to - * initialize the RAM so that we can relocate the monitor code to - * RAM. - * - * Be aware of the restrictions: global data is read-only, BSS is not - * initialized, and stack space is limited to a few kB. - * - ************************************************************************ - */ - -void -board_init_f (ulong bootflag) -{ - bd_t *bd; - ulong len, addr, addr_sp; - ulong *paddr; - gd_t *id; - init_fnc_t **init_fnc_ptr; -#ifdef CONFIG_PRAM - ulong reg; -#endif - - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); - /* compiler optimization barrier needed for GCC >= 3.4 */ - __asm__ __volatile__("": : :"memory"); - - /* Clear initial global data */ - memset ((void *) gd, 0, sizeof (gd_t)); - - for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) { - if ((*init_fnc_ptr)() != 0) { - hang (); - } - } - - /* - * Now that we have DRAM mapped and working, we can - * relocate the code and continue running from DRAM. - * - * Reserve memory at end of RAM for (top down in that order): - * - protected RAM - * - LCD framebuffer - * - monitor code - * - board info struct - */ - len = (ulong)&__bss_end - CONFIG_SYS_MONITOR_BASE; - - addr = CONFIG_SYS_SDRAM_BASE + gd->ram_size; - -#ifdef CONFIG_LOGBUFFER - /* reserve kernel log buffer */ - addr -= (LOGBUFF_RESERVE); - debug ("Reserving %dk for kernel logbuffer at %08lx\n", LOGBUFF_LEN, addr); -#endif - -#ifdef CONFIG_PRAM - /* - * reserve protected RAM - */ - reg = getenv_ulong("pram", 10, CONFIG_PRAM); - addr -= (reg << 10); /* size is in kB */ - debug ("Reserving %ldk for protected RAM at %08lx\n", reg, addr); -#endif /* CONFIG_PRAM */ - - /* round down to next 4 kB limit */ - addr &= ~(4096 - 1); - debug ("Top of RAM usable for U-Boot at: %08lx\n", addr); - -#ifdef CONFIG_LCD -#ifdef CONFIG_FB_ADDR - gd->fb_base = CONFIG_FB_ADDR; -#else - /* reserve memory for LCD display (always full pages) */ - addr = lcd_setmem (addr); - gd->fb_base = addr; -#endif /* CONFIG_FB_ADDR */ -#endif /* CONFIG_LCD */ - - /* - * reserve memory for U-Boot code, data & bss - * round down to next 4 kB limit - */ - addr -= len; - addr &= ~(4096 - 1); - - debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr); - - /* - * reserve memory for malloc() arena - */ - addr_sp = addr - TOTAL_MALLOC_LEN; - debug ("Reserving %dk for malloc() at: %08lx\n", - TOTAL_MALLOC_LEN >> 10, addr_sp); - - /* - * (permanently) allocate a Board Info struct - * and a permanent copy of the "global" data - */ - addr_sp -= sizeof (bd_t); - bd = (bd_t *) addr_sp; - gd->bd = bd; - debug ("Reserving %zu Bytes for Board Info at: %08lx\n", - sizeof (bd_t), addr_sp); - addr_sp -= sizeof (gd_t); - id = (gd_t *) addr_sp; - debug ("Reserving %zu Bytes for Global Data at: %08lx\n", - sizeof (gd_t), addr_sp); - - /* Reserve memory for boot params. */ - addr_sp -= CONFIG_SYS_BOOTPARAMS_LEN; - bd->bi_boot_params = addr_sp; - debug ("Reserving %dk for boot parameters at: %08lx\n", - CONFIG_SYS_BOOTPARAMS_LEN >> 10, addr_sp); - - /* - * Finally, we set up a new (bigger) stack. - * - * Leave some safety gap for SP, force alignment on 16 byte boundary - * Clear initial stack frame - */ - addr_sp -= 16; - addr_sp &= ~0xF; - - paddr = (ulong *)addr_sp; - *paddr-- = 0; - *paddr-- = 0; - addr_sp = (ulong)paddr; - - debug ("Stack Pointer at: %08lx\n", addr_sp); - - /* - * Save local variables to board info struct - */ - bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; /* start of DRAM memory */ - bd->bi_memsize = gd->ram_size; /* size of DRAM memory in bytes */ -#ifdef CONFIG_SYS_INIT_RAM_ADDR - bd->bi_sramstart = CONFIG_SYS_INIT_RAM_ADDR; /* start of SRAM memory */ - bd->bi_sramsize = CONFIG_SYS_INIT_RAM_SIZE; /* size of SRAM memory */ -#endif - bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ - - bd->bi_bootflags = bootflag; /* boot / reboot flag (for LynxOS) */ - - WATCHDOG_RESET (); - bd->bi_intfreq = gd->cpu_clk; /* Internal Freq, in Hz */ - bd->bi_busfreq = gd->bus_clk; /* Bus Freq, in Hz */ -#ifdef CONFIG_PCI - bd->bi_pcifreq = gd->pci_clk; /* PCI Freq in Hz */ -#endif -#ifdef CONFIG_EXTRA_CLOCK - bd->bi_inpfreq = gd->arch.inp_clk; /* input Freq in Hz */ - bd->bi_vcofreq = gd->arch.vco_clk; /* vco Freq in Hz */ - bd->bi_flbfreq = gd->arch.flb_clk; /* flexbus Freq in Hz */ -#endif - -#ifdef CONFIG_SYS_EXTBDINFO - strncpy (bd->bi_s_version, "1.2", sizeof (bd->bi_s_version)); - strncpy (bd->bi_r_version, U_BOOT_VERSION, sizeof (bd->bi_r_version)); -#endif - - WATCHDOG_RESET (); - -#ifdef CONFIG_POST - post_bootmode_init(); - post_run (NULL, POST_ROM | post_bootmode_get(0)); -#endif - - WATCHDOG_RESET(); - - memcpy (id, (void *)gd, sizeof (gd_t)); - - debug ("Start relocate of code from %08x to %08lx\n", CONFIG_SYS_MONITOR_BASE, addr); - relocate_code (addr_sp, id, addr); - - /* NOTREACHED - jump_to_ram() does not return */ -} - -/************************************************************************ - * - * This is the next part if the initialization sequence: we are now - * running from RAM and have a "normal" C environment, i. e. global - * data can be written, BSS has been cleared, the stack size in not - * that critical any more, etc. - * - ************************************************************************ - */ -void board_init_r (gd_t *id, ulong dest_addr) -{ - char *s __maybe_unused; - bd_t *bd; - -#ifndef CONFIG_ENV_IS_NOWHERE - extern char * env_name_spec; -#endif -#ifndef CONFIG_SYS_NO_FLASH - ulong flash_size; -#endif - gd = id; /* initialize RAM version of global data */ - bd = gd->bd; - - gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */ - - WATCHDOG_RESET (); - - gd->reloc_off = dest_addr - CONFIG_SYS_MONITOR_BASE; - - serial_initialize(); - - debug("Now running in RAM - U-Boot at: %08lx\n", dest_addr); - - monitor_flash_len = (ulong)&__init_end - dest_addr; - -#if defined(CONFIG_NEEDS_MANUAL_RELOC) - /* - * We have to relocate the command table manually - */ - fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd), - ll_entry_count(cmd_tbl_t, cmd)); -#endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */ - - /* there are some other pointer constants we must deal with */ -#ifndef CONFIG_ENV_IS_NOWHERE - env_name_spec += gd->reloc_off; -#endif - - WATCHDOG_RESET (); - -#ifdef CONFIG_LOGBUFFER - logbuff_init_ptrs (); -#endif -#ifdef CONFIG_POST - post_output_backlog (); - post_reloc (); -#endif - WATCHDOG_RESET(); - -#if 0 - /* instruction cache enabled in cpu_init_f() for faster relocation */ - icache_enable (); /* it's time to enable the instruction cache */ -#endif - - /* - * Setup trap handlers - */ - trap_init (CONFIG_SYS_SDRAM_BASE); - - /* The Malloc area is immediately below the monitor copy in DRAM */ - mem_malloc_init (CONFIG_SYS_MONITOR_BASE + gd->reloc_off - - TOTAL_MALLOC_LEN, TOTAL_MALLOC_LEN); - -#if !defined(CONFIG_SYS_NO_FLASH) - puts ("Flash: "); - - if ((flash_size = flash_init ()) > 0) { -# ifdef CONFIG_SYS_FLASH_CHECKSUM - print_size (flash_size, ""); - /* - * Compute and print flash CRC if flashchecksum is set to 'y' - * - * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX - */ - if (getenv_yesno("flashchecksum") == 1) { - printf (" CRC: %08X", - crc32 (0, - (const unsigned char *) CONFIG_SYS_FLASH_BASE, - flash_size) - ); - } - putc ('\n'); -# else /* !CONFIG_SYS_FLASH_CHECKSUM */ - print_size (flash_size, "\n"); -# endif /* CONFIG_SYS_FLASH_CHECKSUM */ - } else { - puts (failed); - hang (); - } - - bd->bi_flashstart = CONFIG_SYS_FLASH_BASE; /* update start of FLASH memory */ - bd->bi_flashsize = flash_size; /* size of FLASH memory (final value) */ - bd->bi_flashoffset = 0; -#else /* CONFIG_SYS_NO_FLASH */ - bd->bi_flashsize = 0; - bd->bi_flashstart = 0; - bd->bi_flashoffset = 0; -#endif /* !CONFIG_SYS_NO_FLASH */ - - WATCHDOG_RESET (); - - /* initialize higher level parts of CPU like time base and timers */ - cpu_init_r (); - - WATCHDOG_RESET (); - -#ifdef CONFIG_SPI -# if !defined(CONFIG_ENV_IS_IN_EEPROM) - spi_init_f (); -# endif - spi_init_r (); -#endif - -#if defined(CONFIG_SYS_I2C) - /* Adjust I2C subsystem pointers after relocation */ - i2c_reloc_fixup(); -#endif - - /* relocate environment function pointers etc. */ - env_relocate (); - - WATCHDOG_RESET (); - -#if defined(CONFIG_PCI) - /* - * Do pci configuration - */ - pci_init (); -#endif - - /** leave this here (after malloc(), environment and PCI are working) **/ - /* Initialize stdio devices */ - stdio_init (); - - /* Initialize the jump table for applications */ - jumptable_init (); - - /* Initialize the console (after the relocation and devices init) */ - console_init_r (); - -#if defined(CONFIG_MISC_INIT_R) - /* miscellaneous platform dependent initialisations */ - misc_init_r (); -#endif - -#if defined(CONFIG_CMD_KGDB) - WATCHDOG_RESET (); - puts ("KGDB: "); - kgdb_init (); -#endif - - debug ("U-Boot relocated to %08lx\n", dest_addr); - - /* - * Enable Interrupts - */ - interrupt_init (); - - /* Must happen after interrupts are initialized since - * an irq handler gets installed - */ - timer_init(); - -#ifdef CONFIG_STATUS_LED - status_led_set (STATUS_LED_BOOT, STATUS_LED_BLINKING); -#endif - - udelay (20); - - /* Insert function pointers now that we have relocated the code */ - - /* Initialize from environment */ - load_addr = getenv_ulong("loadaddr", 16, load_addr); - - WATCHDOG_RESET (); - -#if defined(CONFIG_CMD_DOC) - WATCHDOG_RESET (); - puts ("DOC: "); - doc_init (); -#endif - -#if defined(CONFIG_CMD_NAND) - WATCHDOG_RESET (); - puts ("NAND: "); - nand_init(); /* go init the NAND */ -#endif - -#ifdef CONFIG_BITBANGMII - bb_miiphy_init(); -#endif -#if defined(CONFIG_CMD_NET) - WATCHDOG_RESET(); -#if defined(FEC_ENET) - eth_init(bd); -#endif - puts ("Net: "); - eth_initialize (bd); -#endif - -#ifdef CONFIG_POST - post_run (NULL, POST_RAM | post_bootmode_get(0)); -#endif - -#if defined(CONFIG_CMD_PCMCIA) \ - && !defined(CONFIG_CMD_IDE) - WATCHDOG_RESET (); - puts ("PCMCIA:"); - pcmcia_init (); -#endif - -#if defined(CONFIG_CMD_IDE) - WATCHDOG_RESET (); - puts ("IDE: "); - ide_init (); -#endif - -#ifdef CONFIG_LAST_STAGE_INIT - WATCHDOG_RESET (); - /* - * Some parts can be only initialized if all others (like - * Interrupts) are up and running (i.e. the PC-style ISA - * keyboard). - */ - last_stage_init (); -#endif - -#if defined(CONFIG_PRAM) || defined(CONFIG_LOGBUFFER) - /* - * Export available size of memory for Linux, - * taking into account the protected RAM at top of memory - */ - { - ulong pram = 0; - char memsz[32]; - -#ifdef CONFIG_PRAM - pram = getenv_ulong("pram", 10, CONFIG_PRAM); -#endif -#ifdef CONFIG_LOGBUFFER - /* Also take the logbuffer into account (pram is in kB) */ - pram += (LOGBUFF_LEN+LOGBUFF_OVERHEAD)/1024; -#endif - sprintf (memsz, "%ldk", (bd->bi_memsize / 1024) - pram); - setenv ("mem", memsz); - } -#endif - -#ifdef CONFIG_WATCHDOG - /* disable watchdog if environment is set */ - if ((s = getenv ("watchdog")) != NULL) { - if (strncmp (s, "off", 3) == 0) { - WATCHDOG_DISABLE (); - } - } -#endif /* CONFIG_WATCHDOG*/ - - - /* Initialization complete - start the monitor */ - - /* main_loop() can return to retry autoboot, if so just run it again. */ - for (;;) { - WATCHDOG_RESET (); - main_loop (); - } - - /* NOTREACHED - no way out of command loop except booting */ -} diff --git a/arch/microblaze/config.mk b/arch/microblaze/config.mk index 2b817be..e7a3477 100644 --- a/arch/microblaze/config.mk +++ b/arch/microblaze/config.mk @@ -19,4 +19,3 @@ PLATFORM_CPPFLAGS += -ffixed-r31 -D__microblaze__ ifeq ($(CONFIG_SPL_BUILD),) PLATFORM_CPPFLAGS += -fPIC endif -__HAVE_ARCH_GENERIC_BOARD := y diff --git a/arch/microblaze/include/asm/config.h b/arch/microblaze/include/asm/config.h index 32fd636..4af408a 100644 --- a/arch/microblaze/include/asm/config.h +++ b/arch/microblaze/include/asm/config.h @@ -12,6 +12,5 @@ #endif #define CONFIG_NR_DRAM_BANKS 1 -#define CONFIG_SYS_GENERIC_BOARD #endif diff --git a/arch/mips/config.mk b/arch/mips/config.mk index 4dc88f4..52e28f2 100644 --- a/arch/mips/config.mk +++ b/arch/mips/config.mk @@ -43,8 +43,6 @@ PLATFORM_CPPFLAGS += $(cpuflags-y) PLATFORM_CPPFLAGS += -D__MIPS__ -__HAVE_ARCH_GENERIC_BOARD := y - # # From Linux arch/mips/Makefile # diff --git a/arch/nios2/config.mk b/arch/nios2/config.mk index 9b7c56d..82bd887 100644 --- a/arch/nios2/config.mk +++ b/arch/nios2/config.mk @@ -17,5 +17,3 @@ PLATFORM_CPPFLAGS += -G0 LDFLAGS_FINAL += --gc-sections PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections - -__HAVE_ARCH_GENERIC_BOARD := y diff --git a/arch/nios2/include/asm/config.h b/arch/nios2/include/asm/config.h index 476a32b..9c13848 100644 --- a/arch/nios2/include/asm/config.h +++ b/arch/nios2/include/asm/config.h @@ -7,7 +7,6 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_SYS_GENERIC_GLOBAL_DATA #endif diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk index 4110396..83b49b5 100644 --- a/arch/powerpc/config.mk +++ b/arch/powerpc/config.mk @@ -18,9 +18,6 @@ PLATFORM_RELFLAGS += -fpic -mrelocatable -ffunction-sections \ PLATFORM_CPPFLAGS += -D__powerpc__ -ffixed-r2 -m32 PLATFORM_LDFLAGS += -m32 -melf32ppclinux -# Support generic board on PPC -__HAVE_ARCH_GENERIC_BOARD := y - # # When cross-compiling on NetBSD, we have to define __PPC__ or else we # will pick up a va_list declaration that is incompatible with the diff --git a/arch/sandbox/config.mk b/arch/sandbox/config.mk index 7b84f02..b05a90f 100644 --- a/arch/sandbox/config.mk +++ b/arch/sandbox/config.mk @@ -2,7 +2,7 @@ # SPDX-License-Identifier: GPL-2.0+ PLATFORM_CPPFLAGS += -D__SANDBOX__ -U_FORTIFY_SOURCE -PLATFORM_CPPFLAGS += -DCONFIG_ARCH_MAP_SYSMEM -DCONFIG_SYS_GENERIC_BOARD +PLATFORM_CPPFLAGS += -DCONFIG_ARCH_MAP_SYSMEM PLATFORM_LIBS += -lrt # Define this to avoid linking with SDL, which requires SDL libraries @@ -16,9 +16,6 @@ PLATFORM_CPPFLAGS += $(shell sdl-config --cflags) endif endif -# Support generic board on sandbox -__HAVE_ARCH_GENERIC_BOARD := y - cmd_u-boot__ = $(CC) -o $@ -T u-boot.lds \ -Wl,--start-group $(u-boot-main) -Wl,--end-group \ $(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 35d24e4..da27115 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -76,9 +76,6 @@ config DM_GPIO config DM_SERIAL default y -config SYS_MALLOC_F - default y - config SYS_MALLOC_F_LEN default 0x800 diff --git a/arch/x86/config.mk b/arch/x86/config.mk index bb2da46..999143e 100644 --- a/arch/x86/config.mk +++ b/arch/x86/config.mk @@ -17,9 +17,6 @@ PLATFORM_CPPFLAGS += $(PF_CPPFLAGS_X86) PLATFORM_CPPFLAGS += -fno-dwarf2-cfi-asm PLATFORM_CPPFLAGS += -march=i386 -m32 -# Support generic board on x86 -__HAVE_ARCH_GENERIC_BOARD := y - PLATFORM_RELFLAGS += -ffunction-sections -fvisibility=hidden PLATFORM_LDFLAGS += --emit-relocs -Bsymbolic -Bsymbolic-functions -m elf_i386 diff --git a/arch/x86/cpu/quark/hte.c b/arch/x86/cpu/quark/hte.c index 372815d..db601e4 100644 --- a/arch/x86/cpu/quark/hte.c +++ b/arch/x86/cpu/quark/hte.c @@ -20,9 +20,9 @@ */ static void hte_enable_all_errors(void) { - msg_port_write(HTE, 0x000200A2, 0xFFFFFFFF); - msg_port_write(HTE, 0x000200A3, 0x000000FF); - msg_port_write(HTE, 0x000200A4, 0x00000000); + msg_port_write(HTE, 0x000200a2, 0xffffffff); + msg_port_write(HTE, 0x000200a3, 0x000000ff); + msg_port_write(HTE, 0x000200a4, 0x00000000); } /** @@ -32,7 +32,7 @@ static void hte_enable_all_errors(void) */ static u32 hte_check_errors(void) { - return msg_port_read(HTE, 0x000200A7); + return msg_port_read(HTE, 0x000200a7); } /** @@ -44,11 +44,11 @@ static void hte_wait_for_complete(void) ENTERFN(); - do {} while ((msg_port_read(HTE, 0x00020012) & BIT30) != 0); + do {} while ((msg_port_read(HTE, 0x00020012) & (1 << 30)) != 0); tmp = msg_port_read(HTE, 0x00020011); - tmp |= BIT9; - tmp &= ~(BIT12 | BIT13); + tmp |= (1 << 9); + tmp &= ~((1 << 12) | (1 << 13)); msg_port_write(HTE, 0x00020011, tmp); LEAVEFN(); @@ -65,9 +65,9 @@ static void hte_clear_error_regs(void) * Clear all HTE errors and enable error checking * for burst and chunk. */ - tmp = msg_port_read(HTE, 0x000200A1); - tmp |= BIT8; - msg_port_write(HTE, 0x000200A1, tmp); + tmp = msg_port_read(HTE, 0x000200a1); + tmp |= (1 << 8); + msg_port_write(HTE, 0x000200a1, tmp); } /** @@ -91,25 +91,25 @@ static u16 hte_basic_data_cmp(struct mrc_params *mrc_params, u32 addr, u32 offset; if (first_run) { - msg_port_write(HTE, 0x00020020, 0x01B10021); + msg_port_write(HTE, 0x00020020, 0x01b10021); msg_port_write(HTE, 0x00020021, 0x06000000); msg_port_write(HTE, 0x00020022, addr >> 6); msg_port_write(HTE, 0x00020062, 0x00800015); - msg_port_write(HTE, 0x00020063, 0xAAAAAAAA); - msg_port_write(HTE, 0x00020064, 0xCCCCCCCC); - msg_port_write(HTE, 0x00020065, 0xF0F0F0F0); + msg_port_write(HTE, 0x00020063, 0xaaaaaaaa); + msg_port_write(HTE, 0x00020064, 0xcccccccc); + msg_port_write(HTE, 0x00020065, 0xf0f0f0f0); msg_port_write(HTE, 0x00020061, 0x00030008); if (mode == WRITE_TRAIN) - pattern = 0xC33C0000; + pattern = 0xc33c0000; else /* READ_TRAIN */ - pattern = 0xAA5555AA; + pattern = 0xaa5555aa; - for (offset = 0x80; offset <= 0x8F; offset++) + for (offset = 0x80; offset <= 0x8f; offset++) msg_port_write(HTE, offset, pattern); } - msg_port_write(HTE, 0x000200A1, 0xFFFF1000); + msg_port_write(HTE, 0x000200a1, 0xffff1000); msg_port_write(HTE, 0x00020011, 0x00011000); msg_port_write(HTE, 0x00020011, 0x00011100); @@ -119,7 +119,7 @@ static u16 hte_basic_data_cmp(struct mrc_params *mrc_params, u32 addr, * Return bits 15:8 of HTE_CH0_ERR_XSTAT to check for * any bytelane errors. */ - return (hte_check_errors() >> 8) & 0xFF; + return (hte_check_errors() >> 8) & 0xff; } /** @@ -153,7 +153,7 @@ static u16 hte_rw_data_cmp(struct mrc_params *mrc_params, u32 addr, msg_port_write(HTE, 0x00020024, 0x06070000); msg_port_write(HTE, 0x00020022, addr >> 6); msg_port_write(HTE, 0x00020025, addr >> 6); - msg_port_write(HTE, 0x00020062, 0x0000002A); + msg_port_write(HTE, 0x00020062, 0x0000002a); msg_port_write(HTE, 0x00020063, seed_victim); msg_port_write(HTE, 0x00020064, seed_aggressor); msg_port_write(HTE, 0x00020065, seed_victim); @@ -163,21 +163,21 @@ static u16 hte_rw_data_cmp(struct mrc_params *mrc_params, u32 addr, * * Start with bit0 */ - for (offset = 0x80; offset <= 0x8F; offset++) { + for (offset = 0x80; offset <= 0x8f; offset++) { if ((offset % 8) == victim_bit) msg_port_write(HTE, offset, 0x55555555); else - msg_port_write(HTE, offset, 0xCCCCCCCC); + msg_port_write(HTE, offset, 0xcccccccc); } msg_port_write(HTE, 0x00020061, 0x00000000); msg_port_write(HTE, 0x00020066, 0x03440000); - msg_port_write(HTE, 0x000200A1, 0xFFFF1000); + msg_port_write(HTE, 0x000200a1, 0xffff1000); } tmp = 0x10001000 | (loop_cnt << 16); msg_port_write(HTE, 0x00020011, tmp); - msg_port_write(HTE, 0x00020011, tmp | BIT8); + msg_port_write(HTE, 0x00020011, tmp | (1 << 8)); hte_wait_for_complete(); @@ -185,7 +185,7 @@ static u16 hte_rw_data_cmp(struct mrc_params *mrc_params, u32 addr, * Return bits 15:8 of HTE_CH0_ERR_XSTAT to check for * any bytelane errors. */ - return (hte_check_errors() >> 8) & 0xFF; + return (hte_check_errors() >> 8) & 0xff; } /** @@ -219,14 +219,14 @@ u32 hte_mem_init(struct mrc_params *mrc_params, u8 flag) msg_port_write(HTE, 0x00020062, 0x00000015); - for (offset = 0x80; offset <= 0x8F; offset++) - msg_port_write(HTE, offset, ((offset & 1) ? 0xA55A : 0x5AA5)); + for (offset = 0x80; offset <= 0x8f; offset++) + msg_port_write(HTE, offset, ((offset & 1) ? 0xa55a : 0x5aa5)); msg_port_write(HTE, 0x00020021, 0x00000000); msg_port_write(HTE, 0x00020022, (mrc_params->mem_size >> 6) - 1); - msg_port_write(HTE, 0x00020063, 0xAAAAAAAA); - msg_port_write(HTE, 0x00020064, 0xCCCCCCCC); - msg_port_write(HTE, 0x00020065, 0xF0F0F0F0); + msg_port_write(HTE, 0x00020063, 0xaaaaaaaa); + msg_port_write(HTE, 0x00020064, 0xcccccccc); + msg_port_write(HTE, 0x00020065, 0xf0f0f0f0); msg_port_write(HTE, 0x00020066, 0x03000000); switch (flag) { @@ -243,7 +243,7 @@ u32 hte_mem_init(struct mrc_params *mrc_params, u8 flag) break; default: DPF(D_INFO, "Unknown parameter for flag: %d\n", flag); - return 0xFFFFFFFF; + return 0xffffffff; } DPF(D_INFO, "hte_mem_init"); @@ -379,16 +379,16 @@ void hte_mem_op(u32 addr, u8 first_run, u8 is_write) msg_port_write(HTE, 0x00020021, 0x06000000); msg_port_write(HTE, 0x00020022, addr >> 6); msg_port_write(HTE, 0x00020062, 0x00800015); - msg_port_write(HTE, 0x00020063, 0xAAAAAAAA); - msg_port_write(HTE, 0x00020064, 0xCCCCCCCC); - msg_port_write(HTE, 0x00020065, 0xF0F0F0F0); + msg_port_write(HTE, 0x00020063, 0xaaaaaaaa); + msg_port_write(HTE, 0x00020064, 0xcccccccc); + msg_port_write(HTE, 0x00020065, 0xf0f0f0f0); msg_port_write(HTE, 0x00020061, 0x00030008); - for (offset = 0x80; offset <= 0x8F; offset++) - msg_port_write(HTE, offset, 0xC33C0000); + for (offset = 0x80; offset <= 0x8f; offset++) + msg_port_write(HTE, offset, 0xc33c0000); } - msg_port_write(HTE, 0x000200A1, 0xFFFF1000); + msg_port_write(HTE, 0x000200a1, 0xffff1000); msg_port_write(HTE, 0x00020011, 0x00011000); msg_port_write(HTE, 0x00020011, 0x00011100); diff --git a/arch/x86/cpu/quark/hte.h b/arch/x86/cpu/quark/hte.h index 6577796..e98c7ef 100644 --- a/arch/x86/cpu/quark/hte.h +++ b/arch/x86/cpu/quark/hte.h @@ -29,10 +29,10 @@ enum { #define HTE_LOOP_CNT 5 /* random seed for victim */ -#define HTE_LFSR_VICTIM_SEED 0xF294BA21 +#define HTE_LFSR_VICTIM_SEED 0xf294ba21 /* random seed for aggressor */ -#define HTE_LFSR_AGRESSOR_SEED 0xEBA7492D +#define HTE_LFSR_AGRESSOR_SEED 0xeba7492d u32 hte_mem_init(struct mrc_params *mrc_params, u8 flag); u16 hte_basic_write_read(struct mrc_params *mrc_params, u32 addr, diff --git a/arch/x86/cpu/quark/mrc.c b/arch/x86/cpu/quark/mrc.c index 7eb34c5..6e774cb 100644 --- a/arch/x86/cpu/quark/mrc.c +++ b/arch/x86/cpu/quark/mrc.c @@ -34,6 +34,7 @@ */ #include <common.h> +#include <version.h> #include <asm/arch/mrc.h> #include <asm/arch/msg_port.h> #include "mrc_util.h" @@ -105,8 +106,8 @@ static void mrc_adjust_params(struct mrc_params *mrc_params) * Column: 11 for 8Gbx8, else 10 */ mrc_params->column_bits[0] = - ((dram_params[0].density == 4) && - (dram_width == X8)) ? (11) : (10); + (dram_params[0].density == 4) && + (dram_width == X8) ? 11 : 10; /* * Determine row bits: @@ -117,9 +118,9 @@ static void mrc_adjust_params(struct mrc_params *mrc_params) * 4Gbx16=15 4Gbx8=16 * 8Gbx16=16 8Gbx8=16 */ - mrc_params->row_bits[0] = 12 + (dram_params[0].density) + - (((dram_params[0].density < 4) && - (dram_width == X8)) ? (1) : (0)); + mrc_params->row_bits[0] = 12 + dram_params[0].density + + (dram_params[0].density < 4) && + (dram_width == X8) ? 1 : 0; /* * Determine per-channel memory size: @@ -137,7 +138,7 @@ static void mrc_adjust_params(struct mrc_params *mrc_params) * 4Gb x16 0x040000000 (1024MB) * 4Gb x8 0x080000000 (2048MB) */ - mrc_params->channel_size[0] = (1 << dram_params[0].density); + mrc_params->channel_size[0] = 1 << dram_params[0].density; mrc_params->channel_size[0] *= (dram_width == X8) ? 2 : 1; mrc_params->channel_size[0] *= (rank_enables == 0x3) ? 2 : 1; mrc_params->channel_size[0] *= (channel_width == X16) ? 1 : 2; @@ -192,7 +193,7 @@ void mrc_init(struct mrc_params *mrc_params) ENTERFN(); DPF(D_INFO, "MRC Version %04x %s %s\n", MRC_VERSION, - __DATE__, __TIME__); + U_BOOT_DATE, U_BOOT_TIME); /* Set up the data structures used by mrc_mem_init() */ mrc_adjust_params(mrc_params); diff --git a/arch/x86/cpu/quark/mrc_util.c b/arch/x86/cpu/quark/mrc_util.c index 3a79ae5..49d803d 100644 --- a/arch/x86/cpu/quark/mrc_util.c +++ b/arch/x86/cpu/quark/mrc_util.c @@ -18,14 +18,14 @@ static const uint8_t vref_codes[64] = { /* lowest to highest */ - 0x3F, 0x3E, 0x3D, 0x3C, 0x3B, 0x3A, 0x39, 0x38, + 0x3f, 0x3e, 0x3d, 0x3c, 0x3b, 0x3a, 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0x30, - 0x2F, 0x2E, 0x2D, 0x2C, 0x2B, 0x2A, 0x29, 0x28, + 0x2f, 0x2e, 0x2d, 0x2c, 0x2b, 0x2a, 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0x20, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, - 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F, + 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, - 0x18, 0x19, 0x1A, 0x1B, 0x1C, 0x1D, 0x1E, 0x1F + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f }; void mrc_write_mask(u32 unit, u32 addr, u32 data, u32 mask) @@ -80,7 +80,7 @@ void select_mem_mgr(void) ENTERFN(); dco = msg_port_read(MEM_CTLR, DCO); - dco &= ~BIT28; + dco &= ~DCO_PMICTL; msg_port_write(MEM_CTLR, DCO, dco); LEAVEFN(); @@ -94,7 +94,7 @@ void select_hte(void) ENTERFN(); dco = msg_port_read(MEM_CTLR, DCO); - dco |= BIT28; + dco |= DCO_PMICTL; msg_port_write(MEM_CTLR, DCO, dco); LEAVEFN(); @@ -151,26 +151,25 @@ void set_rcvn(uint8_t channel, uint8_t rank, * BL0 -> B01PTRCTL0[11:08] (0x0-0xF) * BL1 -> B01PTRCTL0[23:20] (0x0-0xF) */ - reg = B01PTRCTL0 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET); - msk = (byte_lane & BIT0) ? (BIT23 | BIT22 | BIT21 | BIT20) : - (BIT11 | BIT10 | BIT9 | BIT8); - temp = (byte_lane & BIT0) ? ((pi_count / HALF_CLK) << 20) : - ((pi_count / HALF_CLK) << 8); + reg = B01PTRCTL0 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET; + msk = (byte_lane & 1) ? 0xf00000 : 0xf00; + temp = (byte_lane & 1) ? (pi_count / HALF_CLK) << 20 : + (pi_count / HALF_CLK) << 8; mrc_alt_write_mask(DDRPHY, reg, temp, msk); /* Adjust PI_COUNT */ - pi_count -= ((pi_count / HALF_CLK) & 0xF) * HALF_CLK; + pi_count -= ((pi_count / HALF_CLK) & 0xf) * HALF_CLK; /* * PI (1/64 MCLK, 1 PIs) * BL0 -> B0DLLPICODER0[29:24] (0x00-0x3F) * BL1 -> B1DLLPICODER0[29:24] (0x00-0x3F) */ - reg = (byte_lane & BIT0) ? B1DLLPICODER0 : B0DLLPICODER0; - reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET)); - msk = (BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | BIT24); + reg = (byte_lane & 1) ? B1DLLPICODER0 : B0DLLPICODER0; + reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET); + msk = 0x3f000000; temp = pi_count << 24; mrc_alt_write_mask(DDRPHY, reg, temp, msk); @@ -179,25 +178,25 @@ void set_rcvn(uint8_t channel, uint8_t rank, * BL0/1 -> B01DBCTL1[08/11] (+1 select) * BL0/1 -> B01DBCTL1[02/05] (enable) */ - reg = B01DBCTL1 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET); + reg = B01DBCTL1 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET; msk = 0x00; temp = 0x00; /* enable */ - msk |= (byte_lane & BIT0) ? BIT5 : BIT2; + msk |= (byte_lane & 1) ? (1 << 5) : (1 << 2); if ((pi_count < EARLY_DB) || (pi_count > LATE_DB)) temp |= msk; /* select */ - msk |= (byte_lane & BIT0) ? BIT11 : BIT8; + msk |= (byte_lane & 1) ? (1 << 11) : (1 << 8); if (pi_count < EARLY_DB) temp |= msk; mrc_alt_write_mask(DDRPHY, reg, temp, msk); /* error check */ - if (pi_count > 0x3F) { + if (pi_count > 0x3f) { training_message(channel, rank, byte_lane); mrc_post_code(0xee, 0xe0); } @@ -224,11 +223,11 @@ uint32_t get_rcvn(uint8_t channel, uint8_t rank, uint8_t byte_lane) * BL0 -> B01PTRCTL0[11:08] (0x0-0xF) * BL1 -> B01PTRCTL0[23:20] (0x0-0xF) */ - reg = B01PTRCTL0 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET); + reg = B01PTRCTL0 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET; temp = msg_port_alt_read(DDRPHY, reg); - temp >>= (byte_lane & BIT0) ? 20 : 8; - temp &= 0xF; + temp >>= (byte_lane & 1) ? 20 : 8; + temp &= 0xf; /* Adjust PI_COUNT */ pi_count = temp * HALF_CLK; @@ -238,12 +237,12 @@ uint32_t get_rcvn(uint8_t channel, uint8_t rank, uint8_t byte_lane) * BL0 -> B0DLLPICODER0[29:24] (0x00-0x3F) * BL1 -> B1DLLPICODER0[29:24] (0x00-0x3F) */ - reg = (byte_lane & BIT0) ? B1DLLPICODER0 : B0DLLPICODER0; - reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET)); + reg = (byte_lane & 1) ? B1DLLPICODER0 : B0DLLPICODER0; + reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET); temp = msg_port_alt_read(DDRPHY, reg); temp >>= 24; - temp &= 0x3F; + temp &= 0x3f; /* Adjust PI_COUNT */ pi_count += temp; @@ -275,10 +274,10 @@ void set_rdqs(uint8_t channel, uint8_t rank, * BL0 -> B0RXDQSPICODE[06:00] (0x00-0x47) * BL1 -> B1RXDQSPICODE[06:00] (0x00-0x47) */ - reg = (byte_lane & BIT0) ? B1RXDQSPICODE : B0RXDQSPICODE; - reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET)); - msk = (BIT6 | BIT5 | BIT4 | BIT3 | BIT2 | BIT1 | BIT0); + reg = (byte_lane & 1) ? B1RXDQSPICODE : B0RXDQSPICODE; + reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET); + msk = 0x7f; temp = pi_count << 0; mrc_alt_write_mask(DDRPHY, reg, temp, msk); @@ -310,13 +309,13 @@ uint32_t get_rdqs(uint8_t channel, uint8_t rank, uint8_t byte_lane) * BL0 -> B0RXDQSPICODE[06:00] (0x00-0x47) * BL1 -> B1RXDQSPICODE[06:00] (0x00-0x47) */ - reg = (byte_lane & BIT0) ? B1RXDQSPICODE : B0RXDQSPICODE; - reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET)); + reg = (byte_lane & 1) ? B1RXDQSPICODE : B0RXDQSPICODE; + reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET); temp = msg_port_alt_read(DDRPHY, reg); /* Adjust PI_COUNT */ - pi_count = temp & 0x7F; + pi_count = temp & 0x7f; LEAVEFN(); @@ -346,26 +345,25 @@ void set_wdqs(uint8_t channel, uint8_t rank, * BL0 -> B01PTRCTL0[07:04] (0x0-0xF) * BL1 -> B01PTRCTL0[19:16] (0x0-0xF) */ - reg = B01PTRCTL0 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET); - msk = (byte_lane & BIT0) ? (BIT19 | BIT18 | BIT17 | BIT16) : - (BIT7 | BIT6 | BIT5 | BIT4); + reg = B01PTRCTL0 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET; + msk = (byte_lane & 1) ? 0xf0000 : 0xf0; temp = pi_count / HALF_CLK; - temp <<= (byte_lane & BIT0) ? 16 : 4; + temp <<= (byte_lane & 1) ? 16 : 4; mrc_alt_write_mask(DDRPHY, reg, temp, msk); /* Adjust PI_COUNT */ - pi_count -= ((pi_count / HALF_CLK) & 0xF) * HALF_CLK; + pi_count -= ((pi_count / HALF_CLK) & 0xf) * HALF_CLK; /* * PI (1/64 MCLK, 1 PIs) * BL0 -> B0DLLPICODER0[21:16] (0x00-0x3F) * BL1 -> B1DLLPICODER0[21:16] (0x00-0x3F) */ - reg = (byte_lane & BIT0) ? B1DLLPICODER0 : B0DLLPICODER0; - reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET)); - msk = (BIT21 | BIT20 | BIT19 | BIT18 | BIT17 | BIT16); + reg = (byte_lane & 1) ? B1DLLPICODER0 : B0DLLPICODER0; + reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET); + msk = 0x3f0000; temp = pi_count << 16; mrc_alt_write_mask(DDRPHY, reg, temp, msk); @@ -374,25 +372,25 @@ void set_wdqs(uint8_t channel, uint8_t rank, * BL0/1 -> B01DBCTL1[07/10] (+1 select) * BL0/1 -> B01DBCTL1[01/04] (enable) */ - reg = B01DBCTL1 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET); + reg = B01DBCTL1 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET; msk = 0x00; temp = 0x00; /* enable */ - msk |= (byte_lane & BIT0) ? BIT4 : BIT1; + msk |= (byte_lane & 1) ? (1 << 4) : (1 << 1); if ((pi_count < EARLY_DB) || (pi_count > LATE_DB)) temp |= msk; /* select */ - msk |= (byte_lane & BIT0) ? BIT10 : BIT7; + msk |= (byte_lane & 1) ? (1 << 10) : (1 << 7); if (pi_count < EARLY_DB) temp |= msk; mrc_alt_write_mask(DDRPHY, reg, temp, msk); /* error check */ - if (pi_count > 0x3F) { + if (pi_count > 0x3f) { training_message(channel, rank, byte_lane); mrc_post_code(0xee, 0xe2); } @@ -419,11 +417,11 @@ uint32_t get_wdqs(uint8_t channel, uint8_t rank, uint8_t byte_lane) * BL0 -> B01PTRCTL0[07:04] (0x0-0xF) * BL1 -> B01PTRCTL0[19:16] (0x0-0xF) */ - reg = B01PTRCTL0 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET); + reg = B01PTRCTL0 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET; temp = msg_port_alt_read(DDRPHY, reg); - temp >>= (byte_lane & BIT0) ? 16 : 4; - temp &= 0xF; + temp >>= (byte_lane & 1) ? 16 : 4; + temp &= 0xf; /* Adjust PI_COUNT */ pi_count = (temp * HALF_CLK); @@ -433,12 +431,12 @@ uint32_t get_wdqs(uint8_t channel, uint8_t rank, uint8_t byte_lane) * BL0 -> B0DLLPICODER0[21:16] (0x00-0x3F) * BL1 -> B1DLLPICODER0[21:16] (0x00-0x3F) */ - reg = (byte_lane & BIT0) ? B1DLLPICODER0 : B0DLLPICODER0; - reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET)); + reg = (byte_lane & 1) ? B1DLLPICODER0 : B0DLLPICODER0; + reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET); temp = msg_port_alt_read(DDRPHY, reg); temp >>= 16; - temp &= 0x3F; + temp &= 0x3f; /* Adjust PI_COUNT */ pi_count += temp; @@ -471,26 +469,25 @@ void set_wdq(uint8_t channel, uint8_t rank, * BL0 -> B01PTRCTL0[03:00] (0x0-0xF) * BL1 -> B01PTRCTL0[15:12] (0x0-0xF) */ - reg = B01PTRCTL0 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET); - msk = (byte_lane & BIT0) ? (BIT15 | BIT14 | BIT13 | BIT12) : - (BIT3 | BIT2 | BIT1 | BIT0); + reg = B01PTRCTL0 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET; + msk = (byte_lane & 1) ? 0xf000 : 0xf; temp = pi_count / HALF_CLK; - temp <<= (byte_lane & BIT0) ? 12 : 0; + temp <<= (byte_lane & 1) ? 12 : 0; mrc_alt_write_mask(DDRPHY, reg, temp, msk); /* Adjust PI_COUNT */ - pi_count -= ((pi_count / HALF_CLK) & 0xF) * HALF_CLK; + pi_count -= ((pi_count / HALF_CLK) & 0xf) * HALF_CLK; /* * PI (1/64 MCLK, 1 PIs) * BL0 -> B0DLLPICODER0[13:08] (0x00-0x3F) * BL1 -> B1DLLPICODER0[13:08] (0x00-0x3F) */ - reg = (byte_lane & BIT0) ? B1DLLPICODER0 : B0DLLPICODER0; - reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET)); - msk = (BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8); + reg = (byte_lane & 1) ? B1DLLPICODER0 : B0DLLPICODER0; + reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET); + msk = 0x3f00; temp = pi_count << 8; mrc_alt_write_mask(DDRPHY, reg, temp, msk); @@ -499,25 +496,25 @@ void set_wdq(uint8_t channel, uint8_t rank, * BL0/1 -> B01DBCTL1[06/09] (+1 select) * BL0/1 -> B01DBCTL1[00/03] (enable) */ - reg = B01DBCTL1 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET); + reg = B01DBCTL1 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET; msk = 0x00; temp = 0x00; /* enable */ - msk |= (byte_lane & BIT0) ? BIT3 : BIT0; + msk |= (byte_lane & 1) ? (1 << 3) : (1 << 0); if ((pi_count < EARLY_DB) || (pi_count > LATE_DB)) temp |= msk; /* select */ - msk |= (byte_lane & BIT0) ? BIT9 : BIT6; + msk |= (byte_lane & 1) ? (1 << 9) : (1 << 6); if (pi_count < EARLY_DB) temp |= msk; mrc_alt_write_mask(DDRPHY, reg, temp, msk); /* error check */ - if (pi_count > 0x3F) { + if (pi_count > 0x3f) { training_message(channel, rank, byte_lane); mrc_post_code(0xee, 0xe3); } @@ -544,11 +541,11 @@ uint32_t get_wdq(uint8_t channel, uint8_t rank, uint8_t byte_lane) * BL0 -> B01PTRCTL0[03:00] (0x0-0xF) * BL1 -> B01PTRCTL0[15:12] (0x0-0xF) */ - reg = B01PTRCTL0 + ((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET); + reg = B01PTRCTL0 + (byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET; temp = msg_port_alt_read(DDRPHY, reg); - temp >>= (byte_lane & BIT0) ? (12) : (0); - temp &= 0xF; + temp >>= (byte_lane & 1) ? 12 : 0; + temp &= 0xf; /* Adjust PI_COUNT */ pi_count = temp * HALF_CLK; @@ -558,12 +555,12 @@ uint32_t get_wdq(uint8_t channel, uint8_t rank, uint8_t byte_lane) * BL0 -> B0DLLPICODER0[13:08] (0x00-0x3F) * BL1 -> B1DLLPICODER0[13:08] (0x00-0x3F) */ - reg = (byte_lane & BIT0) ? B1DLLPICODER0 : B0DLLPICODER0; - reg += (((byte_lane >> 1) * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET)); + reg = (byte_lane & 1) ? B1DLLPICODER0 : B0DLLPICODER0; + reg += ((byte_lane >> 1) * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET); temp = msg_port_alt_read(DDRPHY, reg); temp >>= 8; - temp &= 0x3F; + temp &= 0x3f; /* Adjust PI_COUNT */ pi_count += temp; @@ -589,14 +586,14 @@ void set_wcmd(uint8_t channel, uint32_t pi_count) * RDPTR (1/2 MCLK, 64 PIs) * CMDPTRREG[11:08] (0x0-0xF) */ - reg = CMDPTRREG + (channel * DDRIOCCC_CH_OFFSET); - msk = (BIT11 | BIT10 | BIT9 | BIT8); + reg = CMDPTRREG + channel * DDRIOCCC_CH_OFFSET; + msk = 0xf00; temp = pi_count / HALF_CLK; temp <<= 8; mrc_alt_write_mask(DDRPHY, reg, temp, msk); /* Adjust PI_COUNT */ - pi_count -= ((pi_count / HALF_CLK) & 0xF) * HALF_CLK; + pi_count -= ((pi_count / HALF_CLK) & 0xf) * HALF_CLK; /* * PI (1/64 MCLK, 1 PIs) @@ -609,18 +606,13 @@ void set_wcmd(uint8_t channel, uint32_t pi_count) * CMDDLLPICODER1[13:08] -> CMDSLICE R0 (unused) * CMDDLLPICODER1[05:00] -> CMDSLICE L0 (unused) */ - reg = CMDDLLPICODER1 + (channel * DDRIOCCC_CH_OFFSET); - - msk = (BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | BIT24 | - BIT21 | BIT20 | BIT19 | BIT18 | BIT17 | BIT16 | - BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8 | - BIT5 | BIT4 | BIT3 | BIT2 | BIT1 | BIT0); - + reg = CMDDLLPICODER1 + channel * DDRIOCCC_CH_OFFSET; + msk = 0x3f3f3f3f; temp = (pi_count << 24) | (pi_count << 16) | (pi_count << 8) | (pi_count << 0); mrc_alt_write_mask(DDRPHY, reg, temp, msk); - reg = CMDDLLPICODER0 + (channel * DDRIOCCC_CH_OFFSET); /* PO */ + reg = CMDDLLPICODER0 + channel * DDRIOCCC_CH_OFFSET; /* PO */ mrc_alt_write_mask(DDRPHY, reg, temp, msk); /* @@ -628,24 +620,24 @@ void set_wcmd(uint8_t channel, uint32_t pi_count) * CMDCFGREG0[17] (+1 select) * CMDCFGREG0[16] (enable) */ - reg = CMDCFGREG0 + (channel * DDRIOCCC_CH_OFFSET); + reg = CMDCFGREG0 + channel * DDRIOCCC_CH_OFFSET; msk = 0x00; temp = 0x00; /* enable */ - msk |= BIT16; + msk |= (1 << 16); if ((pi_count < EARLY_DB) || (pi_count > LATE_DB)) temp |= msk; /* select */ - msk |= BIT17; + msk |= (1 << 17); if (pi_count < EARLY_DB) temp |= msk; mrc_alt_write_mask(DDRPHY, reg, temp, msk); /* error check */ - if (pi_count > 0x3F) + if (pi_count > 0x3f) mrc_post_code(0xee, 0xe4); LEAVEFN(); @@ -667,10 +659,10 @@ uint32_t get_wcmd(uint8_t channel) * RDPTR (1/2 MCLK, 64 PIs) * CMDPTRREG[11:08] (0x0-0xF) */ - reg = CMDPTRREG + (channel * DDRIOCCC_CH_OFFSET); + reg = CMDPTRREG + channel * DDRIOCCC_CH_OFFSET; temp = msg_port_alt_read(DDRPHY, reg); temp >>= 8; - temp &= 0xF; + temp &= 0xf; /* Adjust PI_COUNT */ pi_count = temp * HALF_CLK; @@ -686,10 +678,10 @@ uint32_t get_wcmd(uint8_t channel) * CMDDLLPICODER1[13:08] -> CMDSLICE R0 (unused) * CMDDLLPICODER1[05:00] -> CMDSLICE L0 (unused) */ - reg = CMDDLLPICODER1 + (channel * DDRIOCCC_CH_OFFSET); + reg = CMDDLLPICODER1 + channel * DDRIOCCC_CH_OFFSET; temp = msg_port_alt_read(DDRPHY, reg); temp >>= 16; - temp &= 0x3F; + temp &= 0x3f; /* Adjust PI_COUNT */ pi_count += temp; @@ -716,13 +708,13 @@ void set_wclk(uint8_t channel, uint8_t rank, uint32_t pi_count) * CCPTRREG[15:12] -> CLK1 (0x0-0xF) * CCPTRREG[11:08] -> CLK0 (0x0-0xF) */ - reg = CCPTRREG + (channel * DDRIOCCC_CH_OFFSET); - msk = (BIT15 | BIT14 | BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8); + reg = CCPTRREG + channel * DDRIOCCC_CH_OFFSET; + msk = 0xff00; temp = ((pi_count / HALF_CLK) << 12) | ((pi_count / HALF_CLK) << 8); mrc_alt_write_mask(DDRPHY, reg, temp, msk); /* Adjust PI_COUNT */ - pi_count -= ((pi_count / HALF_CLK) & 0xF) * HALF_CLK; + pi_count -= ((pi_count / HALF_CLK) & 0xf) * HALF_CLK; /* * PI (1/64 MCLK, 1 PIs) @@ -731,16 +723,18 @@ void set_wclk(uint8_t channel, uint8_t rank, uint32_t pi_count) */ reg = rank ? ECCB1DLLPICODER0 : ECCB1DLLPICODER0; reg += (channel * DDRIOCCC_CH_OFFSET); - msk = (BIT21 | BIT20 | BIT19 | BIT18 | BIT17 | BIT16 | - BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8); + msk = 0x3f3f00; temp = (pi_count << 16) | (pi_count << 8); mrc_alt_write_mask(DDRPHY, reg, temp, msk); + reg = rank ? ECCB1DLLPICODER1 : ECCB1DLLPICODER1; reg += (channel * DDRIOCCC_CH_OFFSET); mrc_alt_write_mask(DDRPHY, reg, temp, msk); + reg = rank ? ECCB1DLLPICODER2 : ECCB1DLLPICODER2; reg += (channel * DDRIOCCC_CH_OFFSET); mrc_alt_write_mask(DDRPHY, reg, temp, msk); + reg = rank ? ECCB1DLLPICODER3 : ECCB1DLLPICODER3; reg += (channel * DDRIOCCC_CH_OFFSET); mrc_alt_write_mask(DDRPHY, reg, temp, msk); @@ -750,24 +744,24 @@ void set_wclk(uint8_t channel, uint8_t rank, uint32_t pi_count) * CCCFGREG1[11:08] (+1 select) * CCCFGREG1[03:00] (enable) */ - reg = CCCFGREG1 + (channel * DDRIOCCC_CH_OFFSET); + reg = CCCFGREG1 + channel * DDRIOCCC_CH_OFFSET; msk = 0x00; temp = 0x00; /* enable */ - msk |= (BIT3 | BIT2 | BIT1 | BIT0); + msk |= 0xf; if ((pi_count < EARLY_DB) || (pi_count > LATE_DB)) temp |= msk; /* select */ - msk |= (BIT11 | BIT10 | BIT9 | BIT8); + msk |= 0xf00; if (pi_count < EARLY_DB) temp |= msk; mrc_alt_write_mask(DDRPHY, reg, temp, msk); /* error check */ - if (pi_count > 0x3F) + if (pi_count > 0x3f) mrc_post_code(0xee, 0xe5); LEAVEFN(); @@ -790,10 +784,10 @@ uint32_t get_wclk(uint8_t channel, uint8_t rank) * CCPTRREG[15:12] -> CLK1 (0x0-0xF) * CCPTRREG[11:08] -> CLK0 (0x0-0xF) */ - reg = CCPTRREG + (channel * DDRIOCCC_CH_OFFSET); + reg = CCPTRREG + channel * DDRIOCCC_CH_OFFSET; temp = msg_port_alt_read(DDRPHY, reg); temp >>= rank ? 12 : 8; - temp &= 0xF; + temp &= 0xf; /* Adjust PI_COUNT */ pi_count = temp * HALF_CLK; @@ -807,7 +801,7 @@ uint32_t get_wclk(uint8_t channel, uint8_t rank) reg += (channel * DDRIOCCC_CH_OFFSET); temp = msg_port_alt_read(DDRPHY, reg); temp >>= rank ? 16 : 8; - temp &= 0x3F; + temp &= 0x3f; pi_count += temp; @@ -835,28 +829,31 @@ void set_wctl(uint8_t channel, uint8_t rank, uint32_t pi_count) * CCPTRREG[31:28] (0x0-0xF) * CCPTRREG[27:24] (0x0-0xF) */ - reg = CCPTRREG + (channel * DDRIOCCC_CH_OFFSET); - msk = (BIT31 | BIT30 | BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | BIT24); + reg = CCPTRREG + channel * DDRIOCCC_CH_OFFSET; + msk = 0xff000000; temp = ((pi_count / HALF_CLK) << 28) | ((pi_count / HALF_CLK) << 24); mrc_alt_write_mask(DDRPHY, reg, temp, msk); /* Adjust PI_COUNT */ - pi_count -= ((pi_count / HALF_CLK) & 0xF) * HALF_CLK; + pi_count -= ((pi_count / HALF_CLK) & 0xf) * HALF_CLK; /* * PI (1/64 MCLK, 1 PIs) * ECCB1DLLPICODER?[29:24] (0x00-0x3F) * ECCB1DLLPICODER?[29:24] (0x00-0x3F) */ - reg = ECCB1DLLPICODER0 + (channel * DDRIOCCC_CH_OFFSET); - msk = (BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | BIT24); + reg = ECCB1DLLPICODER0 + channel * DDRIOCCC_CH_OFFSET; + msk = 0x3f000000; temp = (pi_count << 24); mrc_alt_write_mask(DDRPHY, reg, temp, msk); - reg = ECCB1DLLPICODER1 + (channel * DDRIOCCC_CH_OFFSET); + + reg = ECCB1DLLPICODER1 + channel * DDRIOCCC_CH_OFFSET; mrc_alt_write_mask(DDRPHY, reg, temp, msk); - reg = ECCB1DLLPICODER2 + (channel * DDRIOCCC_CH_OFFSET); + + reg = ECCB1DLLPICODER2 + channel * DDRIOCCC_CH_OFFSET; mrc_alt_write_mask(DDRPHY, reg, temp, msk); - reg = ECCB1DLLPICODER3 + (channel * DDRIOCCC_CH_OFFSET); + + reg = ECCB1DLLPICODER3 + channel * DDRIOCCC_CH_OFFSET; mrc_alt_write_mask(DDRPHY, reg, temp, msk); /* @@ -864,24 +861,24 @@ void set_wctl(uint8_t channel, uint8_t rank, uint32_t pi_count) * CCCFGREG1[13:12] (+1 select) * CCCFGREG1[05:04] (enable) */ - reg = CCCFGREG1 + (channel * DDRIOCCC_CH_OFFSET); + reg = CCCFGREG1 + channel * DDRIOCCC_CH_OFFSET; msk = 0x00; temp = 0x00; /* enable */ - msk |= (BIT5 | BIT4); + msk |= 0x30; if ((pi_count < EARLY_DB) || (pi_count > LATE_DB)) temp |= msk; /* select */ - msk |= (BIT13 | BIT12); + msk |= 0x3000; if (pi_count < EARLY_DB) temp |= msk; mrc_alt_write_mask(DDRPHY, reg, temp, msk); /* error check */ - if (pi_count > 0x3F) + if (pi_count > 0x3f) mrc_post_code(0xee, 0xe6); LEAVEFN(); @@ -906,10 +903,10 @@ uint32_t get_wctl(uint8_t channel, uint8_t rank) * CCPTRREG[31:28] (0x0-0xF) * CCPTRREG[27:24] (0x0-0xF) */ - reg = CCPTRREG + (channel * DDRIOCCC_CH_OFFSET); + reg = CCPTRREG + channel * DDRIOCCC_CH_OFFSET; temp = msg_port_alt_read(DDRPHY, reg); temp >>= 24; - temp &= 0xF; + temp &= 0xf; /* Adjust PI_COUNT */ pi_count = temp * HALF_CLK; @@ -919,10 +916,10 @@ uint32_t get_wctl(uint8_t channel, uint8_t rank) * ECCB1DLLPICODER?[29:24] (0x00-0x3F) * ECCB1DLLPICODER?[29:24] (0x00-0x3F) */ - reg = ECCB1DLLPICODER0 + (channel * DDRIOCCC_CH_OFFSET); + reg = ECCB1DLLPICODER0 + channel * DDRIOCCC_CH_OFFSET; temp = msg_port_alt_read(DDRPHY, reg); temp >>= 24; - temp &= 0x3F; + temp &= 0x3f; /* Adjust PI_COUNT */ pi_count += temp; @@ -938,17 +935,16 @@ uint32_t get_wctl(uint8_t channel, uint8_t rank) */ void set_vref(uint8_t channel, uint8_t byte_lane, uint32_t setting) { - uint32_t reg = (byte_lane & 0x1) ? (B1VREFCTL) : (B0VREFCTL); + uint32_t reg = (byte_lane & 0x1) ? B1VREFCTL : B0VREFCTL; ENTERFN(); DPF(D_TRN, "Vref ch%d ln%d : val=%03X\n", channel, byte_lane, setting); - mrc_alt_write_mask(DDRPHY, (reg + (channel * DDRIODQ_CH_OFFSET) + - ((byte_lane >> 1) * DDRIODQ_BL_OFFSET)), - (vref_codes[setting] << 2), - (BIT7 | BIT6 | BIT5 | BIT4 | BIT3 | BIT2)); + mrc_alt_write_mask(DDRPHY, reg + channel * DDRIODQ_CH_OFFSET + + (byte_lane >> 1) * DDRIODQ_BL_OFFSET, + vref_codes[setting] << 2, 0xfc); /* * need to wait ~300ns for Vref to settle @@ -969,15 +965,15 @@ uint32_t get_vref(uint8_t channel, uint8_t byte_lane) { uint8_t j; uint32_t ret_val = sizeof(vref_codes) / 2; - uint32_t reg = (byte_lane & 0x1) ? (B1VREFCTL) : (B0VREFCTL); + uint32_t reg = (byte_lane & 0x1) ? B1VREFCTL : B0VREFCTL; uint32_t temp; ENTERFN(); - temp = msg_port_alt_read(DDRPHY, (reg + (channel * DDRIODQ_CH_OFFSET) + - ((byte_lane >> 1) * DDRIODQ_BL_OFFSET))); + temp = msg_port_alt_read(DDRPHY, reg + channel * DDRIODQ_CH_OFFSET + + (byte_lane >> 1) * DDRIODQ_BL_OFFSET); temp >>= 2; - temp &= 0x3F; + temp &= 0x3f; for (j = 0; j < sizeof(vref_codes); j++) { if (vref_codes[j] == temp) { @@ -997,7 +993,7 @@ uint32_t get_vref(uint8_t channel, uint8_t byte_lane) */ uint32_t get_addr(uint8_t channel, uint8_t rank) { - uint32_t offset = 0x02000000; /* 32MB */ + uint32_t offset = 32 * 1024 * 1024; /* 32MB */ /* Begin product specific code */ if (channel > 0) { @@ -1040,8 +1036,8 @@ uint32_t sample_dqs(struct mrc_params *mrc_params, uint8_t channel, uint32_t address = get_addr(channel, rank); /* initialise msk[] */ - msk[0] = rcvn ? BIT1 : BIT9; /* BL0 */ - msk[1] = rcvn ? BIT0 : BIT8; /* BL1 */ + msk[0] = rcvn ? (1 << 1) : (1 << 9); /* BL0 */ + msk[1] = rcvn ? (1 << 0) : (1 << 8); /* BL1 */ /* cycle through each byte lane group */ for (bl_grp = 0; bl_grp < (NUM_BYTE_LANES / bl_divisor) / 2; bl_grp++) { @@ -1056,9 +1052,9 @@ uint32_t sample_dqs(struct mrc_params *mrc_params, uint8_t channel, * DQTRAINSTS register */ sampled_val[j] = msg_port_alt_read(DDRPHY, - (DQTRAINSTS + - (bl_grp * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET))); + DQTRAINSTS + + bl_grp * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET); } /* @@ -1076,7 +1072,7 @@ uint32_t sample_dqs(struct mrc_params *mrc_params, uint8_t channel, num_0s++; } if (num_1s > num_0s) - ret_val |= (1 << (bl + (bl_grp * 2))); + ret_val |= (1 << (bl + bl_grp * 2)); } } @@ -1116,10 +1112,10 @@ void find_rising_edge(struct mrc_params *mrc_params, uint32_t delay[], /* increase sample delay by 26 PI (0.2 CLK) */ if (rcvn) { set_rcvn(channel, rank, bl, - delay[bl] + (sample * SAMPLE_DLY)); + delay[bl] + sample * SAMPLE_DLY); } else { set_wdqs(channel, rank, bl, - delay[bl] + (sample * SAMPLE_DLY)); + delay[bl] + sample * SAMPLE_DLY); } } @@ -1129,7 +1125,7 @@ void find_rising_edge(struct mrc_params *mrc_params, uint32_t delay[], DPF(D_TRN, "Find rising edge %s ch%d rnk%d: #%d dly=%d dqs=%02X\n", - (rcvn ? "RCVN" : "WDQS"), channel, rank, sample, + rcvn ? "RCVN" : "WDQS", channel, rank, sample, sample * SAMPLE_DLY, sample_result[sample]); } @@ -1137,7 +1133,7 @@ void find_rising_edge(struct mrc_params *mrc_params, uint32_t delay[], * This pattern will help determine where we landed and ultimately * how to place RCVEN/WDQS. */ - for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { + for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) { /* build transition_pattern (MSB is 1st sample) */ transition_pattern = 0; for (sample = 0; sample < SAMPLE_CNT; sample++) { @@ -1202,7 +1198,7 @@ void find_rising_edge(struct mrc_params *mrc_params, uint32_t delay[], /* take a sample */ temp = sample_dqs(mrc_params, channel, rank, rcvn); /* check all each byte lane for proper edge */ - for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { + for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) { if (temp & (1 << bl)) { /* sampled "1" */ if (direction[bl] == BACKWARD) { @@ -1340,10 +1336,10 @@ void lfsr32(uint32_t *lfsr_ptr) lfsr = *lfsr_ptr; for (i = 0; i < 32; i++) { - bit = 1 ^ (lfsr & BIT0); - bit = bit ^ ((lfsr & BIT1) >> 1); - bit = bit ^ ((lfsr & BIT2) >> 2); - bit = bit ^ ((lfsr & BIT22) >> 22); + bit = 1 ^ (lfsr & 1); + bit = bit ^ ((lfsr & 2) >> 1); + bit = bit ^ ((lfsr & 4) >> 2); + bit = bit ^ ((lfsr & 0x400000) >> 22); lfsr = ((lfsr >> 1) | (bit << 31)); } @@ -1362,16 +1358,16 @@ void clear_pointers(void) for (channel = 0; channel < NUM_CHANNELS; channel++) { for (bl = 0; bl < NUM_BYTE_LANES; bl++) { mrc_alt_write_mask(DDRPHY, - (B01PTRCTL1 + - (channel * DDRIODQ_CH_OFFSET) + - ((bl >> 1) * DDRIODQ_BL_OFFSET)), - ~BIT8, BIT8); + B01PTRCTL1 + + channel * DDRIODQ_CH_OFFSET + + (bl >> 1) * DDRIODQ_BL_OFFSET, + ~(1 << 8), (1 << 8)); mrc_alt_write_mask(DDRPHY, - (B01PTRCTL1 + - (channel * DDRIODQ_CH_OFFSET) + - ((bl >> 1) * DDRIODQ_BL_OFFSET)), - BIT8, BIT8); + B01PTRCTL1 + + channel * DDRIODQ_CH_OFFSET + + (bl >> 1) * DDRIODQ_BL_OFFSET, + (1 << 8), (1 << 8)); } } @@ -1412,7 +1408,7 @@ static void print_timings_internal(uint8_t algo, uint8_t channel, uint8_t rank, break; } - for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { + for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) { switch (algo) { case RCVN: DPF(D_INFO, " %03d", get_rcvn(channel, rank, bl)); diff --git a/arch/x86/cpu/quark/mrc_util.h b/arch/x86/cpu/quark/mrc_util.h index f0ddbce..a63d1f9 100644 --- a/arch/x86/cpu/quark/mrc_util.h +++ b/arch/x86/cpu/quark/mrc_util.h @@ -41,40 +41,6 @@ #define LEAVEFN(...) debug_cond(D_FCALL, "</%s>\n", __func__) #define REPORTFN(...) debug_cond(D_FCALL, "<%s/>\n", __func__) -/* Generic Register Bits */ -#define BIT0 0x00000001 -#define BIT1 0x00000002 -#define BIT2 0x00000004 -#define BIT3 0x00000008 -#define BIT4 0x00000010 -#define BIT5 0x00000020 -#define BIT6 0x00000040 -#define BIT7 0x00000080 -#define BIT8 0x00000100 -#define BIT9 0x00000200 -#define BIT10 0x00000400 -#define BIT11 0x00000800 -#define BIT12 0x00001000 -#define BIT13 0x00002000 -#define BIT14 0x00004000 -#define BIT15 0x00008000 -#define BIT16 0x00010000 -#define BIT17 0x00020000 -#define BIT18 0x00040000 -#define BIT19 0x00080000 -#define BIT20 0x00100000 -#define BIT21 0x00200000 -#define BIT22 0x00400000 -#define BIT23 0x00800000 -#define BIT24 0x01000000 -#define BIT25 0x02000000 -#define BIT26 0x04000000 -#define BIT27 0x08000000 -#define BIT28 0x10000000 -#define BIT29 0x20000000 -#define BIT30 0x40000000 -#define BIT31 0x80000000 - /* Message Bus Port */ #define MEM_CTLR 0x01 #define HOST_BRIDGE 0x03 diff --git a/arch/x86/cpu/quark/quark.c b/arch/x86/cpu/quark/quark.c index dccf7ac..25edcf7 100644 --- a/arch/x86/cpu/quark/quark.c +++ b/arch/x86/cpu/quark/quark.c @@ -6,6 +6,8 @@ #include <common.h> #include <mmc.h> +#include <netdev.h> +#include <phy.h> #include <asm/io.h> #include <asm/pci.h> #include <asm/post.h> @@ -116,3 +118,20 @@ int cpu_mmc_init(bd_t *bis) return pci_mmc_init("Quark SDHCI", mmc_supported, ARRAY_SIZE(mmc_supported)); } + +int cpu_eth_init(bd_t *bis) +{ + u32 base; + int ret0, ret1; + + pci_read_config_dword(QUARK_EMAC0, PCI_BASE_ADDRESS_0, &base); + ret0 = designware_initialize(base, PHY_INTERFACE_MODE_RMII); + + pci_read_config_dword(QUARK_EMAC1, PCI_BASE_ADDRESS_0, &base); + ret1 = designware_initialize(base, PHY_INTERFACE_MODE_RMII); + + if (ret0 < 0 && ret1 < 0) + return -1; + else + return 0; +} diff --git a/arch/x86/cpu/quark/smc.c b/arch/x86/cpu/quark/smc.c index e34bec4..3ffe92b 100644 --- a/arch/x86/cpu/quark/smc.c +++ b/arch/x86/cpu/quark/smc.c @@ -60,7 +60,7 @@ void clear_self_refresh(struct mrc_params *mrc_params) ENTERFN(); /* clear the PMSTS Channel Self Refresh bits */ - mrc_write_mask(MEM_CTLR, PMSTS, BIT0, BIT0); + mrc_write_mask(MEM_CTLR, PMSTS, PMSTS_DISR, PMSTS_DISR); LEAVEFN(); } @@ -101,47 +101,47 @@ void prog_ddr_timing_control(struct mrc_params *mrc_params) wl = 5 + mrc_params->ddr_speed; - dtr0 &= ~(BIT0 | BIT1); + dtr0 &= ~DTR0_DFREQ_MASK; dtr0 |= mrc_params->ddr_speed; - dtr0 &= ~(BIT12 | BIT13 | BIT14); + dtr0 &= ~DTR0_TCL_MASK; tmp1 = tcl - 5; dtr0 |= ((tcl - 5) << 12); - dtr0 &= ~(BIT4 | BIT5 | BIT6 | BIT7); + dtr0 &= ~DTR0_TRP_MASK; dtr0 |= ((trp - 5) << 4); /* 5 bit DRAM Clock */ - dtr0 &= ~(BIT8 | BIT9 | BIT10 | BIT11); + dtr0 &= ~DTR0_TRCD_MASK; dtr0 |= ((trcd - 5) << 8); /* 5 bit DRAM Clock */ - dtr1 &= ~(BIT0 | BIT1 | BIT2); + dtr1 &= ~DTR1_TWCL_MASK; tmp2 = wl - 3; dtr1 |= (wl - 3); - dtr1 &= ~(BIT8 | BIT9 | BIT10 | BIT11); + dtr1 &= ~DTR1_TWTP_MASK; dtr1 |= ((wl + 4 + twr - 14) << 8); /* Change to tWTP */ - dtr1 &= ~(BIT28 | BIT29 | BIT30); + dtr1 &= ~DTR1_TRTP_MASK; dtr1 |= ((MMAX(trtp, 4) - 3) << 28); /* 4 bit DRAM Clock */ - dtr1 &= ~(BIT24 | BIT25); + dtr1 &= ~DTR1_TRRD_MASK; dtr1 |= ((trrd - 4) << 24); /* 4 bit DRAM Clock */ - dtr1 &= ~(BIT4 | BIT5); + dtr1 &= ~DTR1_TCMD_MASK; dtr1 |= (1 << 4); - dtr1 &= ~(BIT20 | BIT21 | BIT22 | BIT23); + dtr1 &= ~DTR1_TRAS_MASK; dtr1 |= ((tras - 14) << 20); /* 6 bit DRAM Clock */ - dtr1 &= ~(BIT16 | BIT17 | BIT18 | BIT19); + dtr1 &= ~DTR1_TFAW_MASK; dtr1 |= ((((tfaw + 1) >> 1) - 5) << 16);/* 4 bit DRAM Clock */ /* Set 4 Clock CAS to CAS delay (multi-burst) */ - dtr1 &= ~(BIT12 | BIT13); + dtr1 &= ~DTR1_TCCD_MASK; - dtr2 &= ~(BIT0 | BIT1 | BIT2); + dtr2 &= ~DTR2_TRRDR_MASK; dtr2 |= 1; - dtr2 &= ~(BIT8 | BIT9 | BIT10); + dtr2 &= ~DTR2_TWWDR_MASK; dtr2 |= (2 << 8); - dtr2 &= ~(BIT16 | BIT17 | BIT18 | BIT19); + dtr2 &= ~DTR2_TRWDR_MASK; dtr2 |= (2 << 16); - dtr3 &= ~(BIT0 | BIT1 | BIT2); + dtr3 &= ~DTR3_TWRDR_MASK; dtr3 |= 2; - dtr3 &= ~(BIT4 | BIT5 | BIT6); + dtr3 &= ~DTR3_TXXXX_MASK; dtr3 |= (2 << 4); - dtr3 &= ~(BIT8 | BIT9 | BIT10 | BIT11); + dtr3 &= ~DTR3_TRWSR_MASK; if (mrc_params->ddr_speed == DDRFREQ_800) { /* Extended RW delay (+1) */ dtr3 |= ((tcl - 5 + 1) << 8); @@ -150,24 +150,24 @@ void prog_ddr_timing_control(struct mrc_params *mrc_params) dtr3 |= ((tcl - 5 + 1) << 8); } - dtr3 &= ~(BIT13 | BIT14 | BIT15 | BIT16); + dtr3 &= ~DTR3_TWRSR_MASK; dtr3 |= ((4 + wl + twtr - 11) << 13); - dtr3 &= ~(BIT22 | BIT23); + dtr3 &= ~DTR3_TXP_MASK; if (mrc_params->ddr_speed == DDRFREQ_800) dtr3 |= ((MMAX(0, 1 - 1)) << 22); else dtr3 |= ((MMAX(0, 2 - 1)) << 22); - dtr4 &= ~(BIT0 | BIT1); + dtr4 &= ~DTR4_WRODTSTRT_MASK; dtr4 |= 1; - dtr4 &= ~(BIT4 | BIT5 | BIT6); + dtr4 &= ~DTR4_WRODTSTOP_MASK; dtr4 |= (1 << 4); - dtr4 &= ~(BIT8 | BIT9 | BIT10); + dtr4 &= ~DTR4_XXXX1_MASK; dtr4 |= ((1 + tmp1 - tmp2 + 2) << 8); - dtr4 &= ~(BIT12 | BIT13 | BIT14); + dtr4 &= ~DTR4_XXXX2_MASK; dtr4 |= ((1 + tmp1 - tmp2 + 2) << 12); - dtr4 &= ~(BIT15 | BIT16); + dtr4 &= ~(DTR4_ODTDIS | DTR4_TRGSTRDIS); msg_port_write(MEM_CTLR, DTR0, dtr0); msg_port_write(MEM_CTLR, DTR1, dtr1); @@ -191,25 +191,25 @@ void prog_decode_before_jedec(struct mrc_params *mrc_params) /* Disable power saving features */ dpmc0 = msg_port_read(MEM_CTLR, DPMC0); - dpmc0 |= (BIT24 | BIT25); - dpmc0 &= ~(BIT16 | BIT17 | BIT18); - dpmc0 &= ~BIT23; + dpmc0 |= (DPMC0_CLKGTDIS | DPMC0_DISPWRDN); + dpmc0 &= ~DPMC0_PCLSTO_MASK; + dpmc0 &= ~DPMC0_DYNSREN; msg_port_write(MEM_CTLR, DPMC0, dpmc0); /* Disable out of order transactions */ dsch = msg_port_read(MEM_CTLR, DSCH); - dsch |= (BIT8 | BIT12); + dsch |= (DSCH_OOODIS | DSCH_NEWBYPDIS); msg_port_write(MEM_CTLR, DSCH, dsch); /* Disable issuing the REF command */ drfc = msg_port_read(MEM_CTLR, DRFC); - drfc &= ~(BIT12 | BIT13 | BIT14); + drfc &= ~DRFC_TREFI_MASK; msg_port_write(MEM_CTLR, DRFC, drfc); /* Disable ZQ calibration short */ dcal = msg_port_read(MEM_CTLR, DCAL); - dcal &= ~(BIT8 | BIT9 | BIT10); - dcal &= ~(BIT12 | BIT13); + dcal &= ~DCAL_ZQCINT_MASK; + dcal &= ~DCAL_SRXZQCL_MASK; msg_port_write(MEM_CTLR, DCAL, dcal); /* @@ -218,9 +218,9 @@ void prog_decode_before_jedec(struct mrc_params *mrc_params) */ drp = 0; if (mrc_params->rank_enables & 1) - drp |= BIT0; + drp |= DRP_RKEN0; if (mrc_params->rank_enables & 2) - drp |= BIT1; + drp |= DRP_RKEN1; msg_port_write(MEM_CTLR, DRP, drp); LEAVEFN(); @@ -238,14 +238,14 @@ void perform_ddr_reset(struct mrc_params *mrc_params) ENTERFN(); /* Set COLDWAKE bit before sending the WAKE message */ - mrc_write_mask(MEM_CTLR, DRMC, BIT16, BIT16); + mrc_write_mask(MEM_CTLR, DRMC, DRMC_COLDWAKE, DRMC_COLDWAKE); /* Send wake command to DUNIT (MUST be done before JEDEC) */ dram_wake_command(); /* Set default value */ msg_port_write(MEM_CTLR, DRMC, - (mrc_params->rd_odt_value == 0 ? BIT12 : 0)); + mrc_params->rd_odt_value == 0 ? DRMC_ODTMODE : 0); LEAVEFN(); } @@ -263,7 +263,7 @@ void ddrphy_init(struct mrc_params *mrc_params) uint8_t bl_grp; /* byte lane group counter (2 BLs per module) */ uint8_t bl_divisor = 1; /* byte lane divisor */ /* For DDR3 --> 0 == 800, 1 == 1066, 2 == 1333 */ - uint8_t speed = mrc_params->ddr_speed & (BIT1 | BIT0); + uint8_t speed = mrc_params->ddr_speed & 3; uint8_t cas; uint8_t cwl; @@ -286,21 +286,21 @@ void ddrphy_init(struct mrc_params *mrc_params) if (mrc_params->channel_enables & (1 << ch)) { /* Deassert DDRPHY Initialization Complete */ mrc_alt_write_mask(DDRPHY, - (CMDPMCONFIG0 + (ch * DDRIOCCC_CH_OFFSET)), - ~BIT20, BIT20); /* SPID_INIT_COMPLETE=0 */ + CMDPMCONFIG0 + ch * DDRIOCCC_CH_OFFSET, + ~(1 << 20), 1 << 20); /* SPID_INIT_COMPLETE=0 */ /* Deassert IOBUFACT */ mrc_alt_write_mask(DDRPHY, - (CMDCFGREG0 + (ch * DDRIOCCC_CH_OFFSET)), - ~BIT2, BIT2); /* IOBUFACTRST_N=0 */ + CMDCFGREG0 + ch * DDRIOCCC_CH_OFFSET, + ~(1 << 2), 1 << 2); /* IOBUFACTRST_N=0 */ /* Disable WRPTR */ mrc_alt_write_mask(DDRPHY, - (CMDPTRREG + (ch * DDRIOCCC_CH_OFFSET)), - ~BIT0, BIT0); /* WRPTRENABLE=0 */ + CMDPTRREG + ch * DDRIOCCC_CH_OFFSET, + ~(1 << 0), 1 << 0); /* WRPTRENABLE=0 */ } } /* Put PHY in reset */ - mrc_alt_write_mask(DDRPHY, MASTERRSTN, 0, BIT0); + mrc_alt_write_mask(DDRPHY, MASTERRSTN, 0, 1); /* Initialize DQ01, DQ23, CMD, CLK-CTL, COMP modules */ @@ -310,14 +310,14 @@ void ddrphy_init(struct mrc_params *mrc_params) if (mrc_params->channel_enables & (1 << ch)) { /* DQ01-DQ23 */ for (bl_grp = 0; - bl_grp < ((NUM_BYTE_LANES / bl_divisor) / 2); + bl_grp < (NUM_BYTE_LANES / bl_divisor) / 2; bl_grp++) { /* Analog MUX select - IO2xCLKSEL */ mrc_alt_write_mask(DDRPHY, - (DQOBSCKEBBCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - ((bl_grp) ? (0x00) : (BIT22)), (BIT22)); + DQOBSCKEBBCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + bl_grp ? 0 : (1 << 22), 1 << 22); /* ODT Strength */ switch (mrc_params->rd_odt_value) { @@ -337,20 +337,20 @@ void ddrphy_init(struct mrc_params *mrc_params) /* ODT strength */ mrc_alt_write_mask(DDRPHY, - (B0RXIOBUFCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - (temp << 5), (BIT6 | BIT5)); + B0RXIOBUFCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + temp << 5, 0x60); /* ODT strength */ mrc_alt_write_mask(DDRPHY, - (B1RXIOBUFCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - (temp << 5), (BIT6 | BIT5)); + B1RXIOBUFCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + temp << 5, 0x60); /* Dynamic ODT/DIFFAMP */ - temp = (((cas) << 24) | ((cas) << 16) | - ((cas) << 8) | ((cas) << 0)); + temp = (cas << 24) | (cas << 16) | + (cas << 8) | (cas << 0); switch (speed) { case 0: temp -= 0x01010101; @@ -368,247 +368,199 @@ void ddrphy_init(struct mrc_params *mrc_params) /* Launch Time: ODT, DIFFAMP, ODT, DIFFAMP */ mrc_alt_write_mask(DDRPHY, - (B01LATCTL1 + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - temp, - (BIT28 | BIT27 | BIT26 | BIT25 | BIT24 | - BIT20 | BIT19 | BIT18 | BIT17 | BIT16 | - BIT12 | BIT11 | BIT10 | BIT9 | BIT8 | - BIT4 | BIT3 | BIT2 | BIT1 | BIT0)); + B01LATCTL1 + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + temp, 0x1f1f1f1f); switch (speed) { /* HSD#234715 */ case 0: - temp = ((0x06 << 16) | (0x07 << 8)); + temp = (0x06 << 16) | (0x07 << 8); break; /* 800 */ case 1: - temp = ((0x07 << 16) | (0x08 << 8)); + temp = (0x07 << 16) | (0x08 << 8); break; /* 1066 */ case 2: - temp = ((0x09 << 16) | (0x0A << 8)); + temp = (0x09 << 16) | (0x0a << 8); break; /* 1333 */ case 3: - temp = ((0x0A << 16) | (0x0B << 8)); + temp = (0x0a << 16) | (0x0b << 8); break; /* 1600 */ } /* On Duration: ODT, DIFFAMP */ mrc_alt_write_mask(DDRPHY, - (B0ONDURCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - temp, - (BIT21 | BIT20 | BIT19 | BIT18 | BIT17 | - BIT16 | BIT13 | BIT12 | BIT11 | BIT10 | - BIT9 | BIT8)); + B0ONDURCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + temp, 0x003f3f00); /* On Duration: ODT, DIFFAMP */ mrc_alt_write_mask(DDRPHY, - (B1ONDURCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - temp, - (BIT21 | BIT20 | BIT19 | BIT18 | BIT17 | - BIT16 | BIT13 | BIT12 | BIT11 | BIT10 | - BIT9 | BIT8)); + B1ONDURCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + temp, 0x003f3f00); switch (mrc_params->rd_odt_value) { case 0: /* override DIFFAMP=on, ODT=off */ - temp = ((0x3F << 16) | (0x3f << 10)); + temp = (0x3f << 16) | (0x3f << 10); break; default: /* override DIFFAMP=on, ODT=on */ - temp = ((0x3F << 16) | (0x2A << 10)); + temp = (0x3f << 16) | (0x2a << 10); break; } /* Override: DIFFAMP, ODT */ mrc_alt_write_mask(DDRPHY, - (B0OVRCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - temp, - (BIT21 | BIT20 | BIT19 | BIT18 | BIT17 | - BIT16 | BIT15 | BIT14 | BIT13 | BIT12 | - BIT11 | BIT10)); + B0OVRCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + temp, 0x003ffc00); /* Override: DIFFAMP, ODT */ mrc_alt_write_mask(DDRPHY, - (B1OVRCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - temp, - (BIT21 | BIT20 | BIT19 | BIT18 | BIT17 | - BIT16 | BIT15 | BIT14 | BIT13 | BIT12 | - BIT11 | BIT10)); + B1OVRCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + temp, 0x003ffc00); /* DLL Setup */ /* 1xCLK Domain Timings: tEDP,RCVEN,WDQS (PO) */ mrc_alt_write_mask(DDRPHY, - (B0LATCTL0 + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - (((cas + 7) << 16) | ((cas - 4) << 8) | - ((cwl - 2) << 0)), - (BIT21 | BIT20 | BIT19 | BIT18 | BIT17 | - BIT16 | BIT12 | BIT11 | BIT10 | BIT9 | - BIT8 | BIT4 | BIT3 | BIT2 | BIT1 | - BIT0)); + B0LATCTL0 + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + ((cas + 7) << 16) | ((cas - 4) << 8) | + ((cwl - 2) << 0), 0x003f1f1f); mrc_alt_write_mask(DDRPHY, - (B1LATCTL0 + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - (((cas + 7) << 16) | ((cas - 4) << 8) | - ((cwl - 2) << 0)), - (BIT21 | BIT20 | BIT19 | BIT18 | BIT17 | - BIT16 | BIT12 | BIT11 | BIT10 | BIT9 | - BIT8 | BIT4 | BIT3 | BIT2 | BIT1 | - BIT0)); + B1LATCTL0 + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + ((cas + 7) << 16) | ((cas - 4) << 8) | + ((cwl - 2) << 0), 0x003f1f1f); /* RCVEN Bypass (PO) */ mrc_alt_write_mask(DDRPHY, - (B0RXIOBUFCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - ((0x0 << 7) | (0x0 << 0)), - (BIT7 | BIT0)); + B0RXIOBUFCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + 0, 0x81); mrc_alt_write_mask(DDRPHY, - (B1RXIOBUFCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - ((0x0 << 7) | (0x0 << 0)), - (BIT7 | BIT0)); + B1RXIOBUFCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + 0, 0x81); /* TX */ mrc_alt_write_mask(DDRPHY, - (DQCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - (BIT16), (BIT16)); + DQCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + 1 << 16, 1 << 16); mrc_alt_write_mask(DDRPHY, - (B01PTRCTL1 + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - (BIT8), (BIT8)); + B01PTRCTL1 + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + 1 << 8, 1 << 8); /* RX (PO) */ /* Internal Vref Code, Enable#, Ext_or_Int (1=Ext) */ mrc_alt_write_mask(DDRPHY, - (B0VREFCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - ((0x03 << 2) | (0x0 << 1) | (0x0 << 0)), - (BIT7 | BIT6 | BIT5 | BIT4 | BIT3 | - BIT2 | BIT1 | BIT0)); + B0VREFCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + (0x03 << 2) | (0x0 << 1) | (0x0 << 0), + 0xff); /* Internal Vref Code, Enable#, Ext_or_Int (1=Ext) */ mrc_alt_write_mask(DDRPHY, - (B1VREFCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - ((0x03 << 2) | (0x0 << 1) | (0x0 << 0)), - (BIT7 | BIT6 | BIT5 | BIT4 | BIT3 | - BIT2 | BIT1 | BIT0)); + B1VREFCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + (0x03 << 2) | (0x0 << 1) | (0x0 << 0), + 0xff); /* Per-Bit De-Skew Enable */ mrc_alt_write_mask(DDRPHY, - (B0RXIOBUFCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - (0), (BIT4)); + B0RXIOBUFCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + 0, 0x10); /* Per-Bit De-Skew Enable */ mrc_alt_write_mask(DDRPHY, - (B1RXIOBUFCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - (0), (BIT4)); + B1RXIOBUFCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + 0, 0x10); } /* CLKEBB */ mrc_alt_write_mask(DDRPHY, - (CMDOBSCKEBBCTL + (ch * DDRIOCCC_CH_OFFSET)), - 0, (BIT23)); + CMDOBSCKEBBCTL + ch * DDRIOCCC_CH_OFFSET, + 0, 1 << 23); /* Enable tristate control of cmd/address bus */ mrc_alt_write_mask(DDRPHY, - (CMDCFGREG0 + (ch * DDRIOCCC_CH_OFFSET)), - 0, (BIT1 | BIT0)); + CMDCFGREG0 + ch * DDRIOCCC_CH_OFFSET, + 0, 0x03); /* ODT RCOMP */ mrc_alt_write_mask(DDRPHY, - (CMDRCOMPODT + (ch * DDRIOCCC_CH_OFFSET)), - ((0x03 << 5) | (0x03 << 0)), - (BIT9 | BIT8 | BIT7 | BIT6 | BIT5 | BIT4 | - BIT3 | BIT2 | BIT1 | BIT0)); + CMDRCOMPODT + ch * DDRIOCCC_CH_OFFSET, + (0x03 << 5) | (0x03 << 0), 0x3ff); /* CMDPM* registers must be programmed in this order */ /* Turn On Delays: SFR (regulator), MPLL */ mrc_alt_write_mask(DDRPHY, - (CMDPMDLYREG4 + (ch * DDRIOCCC_CH_OFFSET)), - ((0xFFFFU << 16) | (0xFFFF << 0)), - 0xFFFFFFFF); + CMDPMDLYREG4 + ch * DDRIOCCC_CH_OFFSET, + 0xffffffff, 0xffffffff); /* * Delays: ASSERT_IOBUFACT_to_ALLON0_for_PM_MSG_3, * VREG (MDLL) Turn On, ALLON0_to_DEASSERT_IOBUFACT * for_PM_MSG_gt0, MDLL Turn On */ mrc_alt_write_mask(DDRPHY, - (CMDPMDLYREG3 + (ch * DDRIOCCC_CH_OFFSET)), - ((0xFU << 28) | (0xFFF << 16) | (0xF << 12) | - (0x616 << 0)), 0xFFFFFFFF); + CMDPMDLYREG3 + ch * DDRIOCCC_CH_OFFSET, + 0xfffff616, 0xffffffff); /* MPLL Divider Reset Delays */ mrc_alt_write_mask(DDRPHY, - (CMDPMDLYREG2 + (ch * DDRIOCCC_CH_OFFSET)), - ((0xFFU << 24) | (0xFF << 16) | (0xFF << 8) | - (0xFF << 0)), 0xFFFFFFFF); + CMDPMDLYREG2 + ch * DDRIOCCC_CH_OFFSET, + 0xffffffff, 0xffffffff); /* Turn Off Delays: VREG, Staggered MDLL, MDLL, PI */ mrc_alt_write_mask(DDRPHY, - (CMDPMDLYREG1 + (ch * DDRIOCCC_CH_OFFSET)), - ((0xFFU << 24) | (0xFF << 16) | (0xFF << 8) | - (0xFF << 0)), 0xFFFFFFFF); + CMDPMDLYREG1 + ch * DDRIOCCC_CH_OFFSET, + 0xffffffff, 0xffffffff); /* Turn On Delays: MPLL, Staggered MDLL, PI, IOBUFACT */ mrc_alt_write_mask(DDRPHY, - (CMDPMDLYREG0 + (ch * DDRIOCCC_CH_OFFSET)), - ((0xFFU << 24) | (0xFF << 16) | (0xFF << 8) | - (0xFF << 0)), 0xFFFFFFFF); + CMDPMDLYREG0 + ch * DDRIOCCC_CH_OFFSET, + 0xffffffff, 0xffffffff); /* Allow PUnit signals */ mrc_alt_write_mask(DDRPHY, - (CMDPMCONFIG0 + (ch * DDRIOCCC_CH_OFFSET)), - ((0x6 << 8) | BIT6 | (0x4 << 0)), - (BIT31 | BIT30 | BIT29 | BIT28 | BIT27 | BIT26 | - BIT25 | BIT24 | BIT23 | BIT22 | BIT21 | BIT11 | - BIT10 | BIT9 | BIT8 | BIT6 | BIT3 | BIT2 | - BIT1 | BIT0)); + CMDPMCONFIG0 + ch * DDRIOCCC_CH_OFFSET, + (0x6 << 8) | (0x1 << 6) | (0x4 << 0), + 0xffe00f4f); /* DLL_VREG Bias Trim, VREF Tuning for DLL_VREG */ mrc_alt_write_mask(DDRPHY, - (CMDMDLLCTL + (ch * DDRIOCCC_CH_OFFSET)), - ((0x3 << 4) | (0x7 << 0)), - (BIT6 | BIT5 | BIT4 | BIT3 | BIT2 | BIT1 | - BIT0)); + CMDMDLLCTL + ch * DDRIOCCC_CH_OFFSET, + (0x3 << 4) | (0x7 << 0), 0x7f); /* CLK-CTL */ mrc_alt_write_mask(DDRPHY, - (CCOBSCKEBBCTL + (ch * DDRIOCCC_CH_OFFSET)), - 0, BIT24); /* CLKEBB */ + CCOBSCKEBBCTL + ch * DDRIOCCC_CH_OFFSET, + 0, 1 << 24); /* CLKEBB */ /* Buffer Enable: CS,CKE,ODT,CLK */ mrc_alt_write_mask(DDRPHY, - (CCCFGREG0 + (ch * DDRIOCCC_CH_OFFSET)), - ((0x0 << 16) | (0x0 << 12) | (0x0 << 8) | - (0xF << 4) | BIT0), - (BIT19 | BIT18 | BIT17 | BIT16 | BIT15 | BIT14 | - BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8 | - BIT7 | BIT6 | BIT5 | BIT4 | BIT0)); + CCCFGREG0 + ch * DDRIOCCC_CH_OFFSET, + 0x1f, 0x000ffff1); /* ODT RCOMP */ mrc_alt_write_mask(DDRPHY, - (CCRCOMPODT + (ch * DDRIOCCC_CH_OFFSET)), - ((0x03 << 8) | (0x03 << 0)), - (BIT12 | BIT11 | BIT10 | BIT9 | BIT8 | BIT4 | - BIT3 | BIT2 | BIT1 | BIT0)); + CCRCOMPODT + ch * DDRIOCCC_CH_OFFSET, + (0x03 << 8) | (0x03 << 0), 0x00001f1f); /* DLL_VREG Bias Trim, VREF Tuning for DLL_VREG */ mrc_alt_write_mask(DDRPHY, - (CCMDLLCTL + (ch * DDRIOCCC_CH_OFFSET)), - ((0x3 << 4) | (0x7 << 0)), - (BIT6 | BIT5 | BIT4 | BIT3 | BIT2 | BIT1 | - BIT0)); + CCMDLLCTL + ch * DDRIOCCC_CH_OFFSET, + (0x3 << 4) | (0x7 << 0), 0x7f); /* * COMP (RON channel specific) @@ -618,66 +570,43 @@ void ddrphy_init(struct mrc_params *mrc_params) */ /* RCOMP Vref PU/PD */ mrc_alt_write_mask(DDRPHY, - (DQVREFCH0 + (ch * DDRCOMP_CH_OFFSET)), - ((0x08 << 24) | (0x03 << 16)), - (BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | - BIT24 | BIT21 | BIT20 | BIT19 | BIT18 | - BIT17 | BIT16)); + DQVREFCH0 + ch * DDRCOMP_CH_OFFSET, + (0x08 << 24) | (0x03 << 16), 0x3f3f0000); /* RCOMP Vref PU/PD */ mrc_alt_write_mask(DDRPHY, - (CMDVREFCH0 + (ch * DDRCOMP_CH_OFFSET)), - ((0x0C << 24) | (0x03 << 16)), - (BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | - BIT24 | BIT21 | BIT20 | BIT19 | BIT18 | - BIT17 | BIT16)); + CMDVREFCH0 + ch * DDRCOMP_CH_OFFSET, + (0x0C << 24) | (0x03 << 16), 0x3f3f0000); /* RCOMP Vref PU/PD */ mrc_alt_write_mask(DDRPHY, - (CLKVREFCH0 + (ch * DDRCOMP_CH_OFFSET)), - ((0x0F << 24) | (0x03 << 16)), - (BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | - BIT24 | BIT21 | BIT20 | BIT19 | BIT18 | - BIT17 | BIT16)); + CLKVREFCH0 + ch * DDRCOMP_CH_OFFSET, + (0x0F << 24) | (0x03 << 16), 0x3f3f0000); /* RCOMP Vref PU/PD */ mrc_alt_write_mask(DDRPHY, - (DQSVREFCH0 + (ch * DDRCOMP_CH_OFFSET)), - ((0x08 << 24) | (0x03 << 16)), - (BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | - BIT24 | BIT21 | BIT20 | BIT19 | BIT18 | - BIT17 | BIT16)); + DQSVREFCH0 + ch * DDRCOMP_CH_OFFSET, + (0x08 << 24) | (0x03 << 16), 0x3f3f0000); /* RCOMP Vref PU/PD */ mrc_alt_write_mask(DDRPHY, - (CTLVREFCH0 + (ch * DDRCOMP_CH_OFFSET)), - ((0x0C << 24) | (0x03 << 16)), - (BIT29 | BIT28 | BIT27 | BIT26 | BIT25 | - BIT24 | BIT21 | BIT20 | BIT19 | BIT18 | - BIT17 | BIT16)); + CTLVREFCH0 + ch * DDRCOMP_CH_OFFSET, + (0x0C << 24) | (0x03 << 16), 0x3f3f0000); /* DQS Swapped Input Enable */ mrc_alt_write_mask(DDRPHY, - (COMPEN1CH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT19 | BIT17), - (BIT31 | BIT30 | BIT19 | BIT17 | - BIT15 | BIT14)); + COMPEN1CH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 19) | (1 << 17), 0xc00ac000); /* ODT VREF = 1.5 x 274/360+274 = 0.65V (code of ~50) */ /* ODT Vref PU/PD */ mrc_alt_write_mask(DDRPHY, - (DQVREFCH0 + (ch * DDRCOMP_CH_OFFSET)), - ((0x32 << 8) | (0x03 << 0)), - (BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8 | - BIT5 | BIT4 | BIT3 | BIT2 | BIT1 | BIT0)); + DQVREFCH0 + ch * DDRCOMP_CH_OFFSET, + (0x32 << 8) | (0x03 << 0), 0x00003f3f); /* ODT Vref PU/PD */ mrc_alt_write_mask(DDRPHY, - (DQSVREFCH0 + (ch * DDRCOMP_CH_OFFSET)), - ((0x32 << 8) | (0x03 << 0)), - (BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8 | - BIT5 | BIT4 | BIT3 | BIT2 | BIT1 | BIT0)); + DQSVREFCH0 + ch * DDRCOMP_CH_OFFSET, + (0x32 << 8) | (0x03 << 0), 0x00003f3f); /* ODT Vref PU/PD */ mrc_alt_write_mask(DDRPHY, - (CLKVREFCH0 + (ch * DDRCOMP_CH_OFFSET)), - ((0x0E << 8) | (0x05 << 0)), - (BIT13 | BIT12 | BIT11 | BIT10 | BIT9 | BIT8 | - BIT5 | BIT4 | BIT3 | BIT2 | BIT1 | BIT0)); + CLKVREFCH0 + ch * DDRCOMP_CH_OFFSET, + (0x0E << 8) | (0x05 << 0), 0x00003f3f); /* * Slew rate settings are frequency specific, @@ -685,273 +614,227 @@ void ddrphy_init(struct mrc_params *mrc_params) * - DQ/DQS/DM/CLK SR: 4V/ns, * - CTRL/CMD SR: 1.5V/ns */ - temp = (0x0E << 16) | (0x0E << 12) | (0x08 << 8) | - (0x0B << 4) | (0x0B << 0); + temp = (0x0e << 16) | (0x0e << 12) | (0x08 << 8) | + (0x0b << 4) | (0x0b << 0); /* DCOMP Delay Select: CTL,CMD,CLK,DQS,DQ */ mrc_alt_write_mask(DDRPHY, - (DLYSELCH0 + (ch * DDRCOMP_CH_OFFSET)), - temp, - (BIT19 | BIT18 | BIT17 | BIT16 | BIT15 | - BIT14 | BIT13 | BIT12 | BIT11 | BIT10 | - BIT9 | BIT8 | BIT7 | BIT6 | BIT5 | BIT4 | - BIT3 | BIT2 | BIT1 | BIT0)); + DLYSELCH0 + ch * DDRCOMP_CH_OFFSET, + temp, 0x000fffff); /* TCO Vref CLK,DQS,DQ */ mrc_alt_write_mask(DDRPHY, - (TCOVREFCH0 + (ch * DDRCOMP_CH_OFFSET)), - ((0x05 << 16) | (0x05 << 8) | (0x05 << 0)), - (BIT21 | BIT20 | BIT19 | BIT18 | BIT17 | - BIT16 | BIT13 | BIT12 | BIT11 | BIT10 | - BIT9 | BIT8 | BIT5 | BIT4 | BIT3 | BIT2 | - BIT1 | BIT0)); + TCOVREFCH0 + ch * DDRCOMP_CH_OFFSET, + (0x05 << 16) | (0x05 << 8) | (0x05 << 0), + 0x003f3f3f); /* ODTCOMP CMD/CTL PU/PD */ mrc_alt_write_mask(DDRPHY, - (CCBUFODTCH0 + (ch * DDRCOMP_CH_OFFSET)), - ((0x03 << 8) | (0x03 << 0)), - (BIT12 | BIT11 | BIT10 | BIT9 | BIT8 | - BIT4 | BIT3 | BIT2 | BIT1 | BIT0)); + CCBUFODTCH0 + ch * DDRCOMP_CH_OFFSET, + (0x03 << 8) | (0x03 << 0), + 0x00001f1f); /* COMP */ mrc_alt_write_mask(DDRPHY, - (COMPEN0CH0 + (ch * DDRCOMP_CH_OFFSET)), - 0, (BIT31 | BIT30 | BIT8)); + COMPEN0CH0 + ch * DDRCOMP_CH_OFFSET, + 0, 0xc0000100); #ifdef BACKUP_COMPS /* DQ COMP Overrides */ /* RCOMP PU */ mrc_alt_write_mask(DDRPHY, - (DQDRVPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0A << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQDRVPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0a << 16), + 0x801f0000); /* RCOMP PD */ mrc_alt_write_mask(DDRPHY, - (DQDRVPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0A << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQDRVPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0a << 16), + 0x801f0000); /* DCOMP PU */ mrc_alt_write_mask(DDRPHY, - (DQDLYPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x10 << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQDLYPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x10 << 16), + 0x801f0000); /* DCOMP PD */ mrc_alt_write_mask(DDRPHY, - (DQDLYPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x10 << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQDLYPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x10 << 16), + 0x801f0000); /* ODTCOMP PU */ mrc_alt_write_mask(DDRPHY, - (DQODTPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0B << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQODTPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0b << 16), + 0x801f0000); /* ODTCOMP PD */ mrc_alt_write_mask(DDRPHY, - (DQODTPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0B << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQODTPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0b << 16), + 0x801f0000); /* TCOCOMP PU */ mrc_alt_write_mask(DDRPHY, - (DQTCOPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31), (BIT31)); + DQTCOPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + 1 << 31, 1 << 31); /* TCOCOMP PD */ mrc_alt_write_mask(DDRPHY, - (DQTCOPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31), (BIT31)); + DQTCOPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + 1 << 31, 1 << 31); /* DQS COMP Overrides */ /* RCOMP PU */ mrc_alt_write_mask(DDRPHY, - (DQSDRVPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0A << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQSDRVPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0a << 16), + 0x801f0000); /* RCOMP PD */ mrc_alt_write_mask(DDRPHY, - (DQSDRVPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0A << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQSDRVPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0a << 16), + 0x801f0000); /* DCOMP PU */ mrc_alt_write_mask(DDRPHY, - (DQSDLYPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x10 << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQSDLYPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x10 << 16), + 0x801f0000); /* DCOMP PD */ mrc_alt_write_mask(DDRPHY, - (DQSDLYPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x10 << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQSDLYPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x10 << 16), + 0x801f0000); /* ODTCOMP PU */ mrc_alt_write_mask(DDRPHY, - (DQSODTPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0B << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQSODTPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0b << 16), + 0x801f0000); /* ODTCOMP PD */ mrc_alt_write_mask(DDRPHY, - (DQSODTPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0B << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQSODTPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0b << 16), + 0x801f0000); /* TCOCOMP PU */ mrc_alt_write_mask(DDRPHY, - (DQSTCOPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31), (BIT31)); + DQSTCOPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + 1 << 31, 1 << 31); /* TCOCOMP PD */ mrc_alt_write_mask(DDRPHY, - (DQSTCOPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31), (BIT31)); + DQSTCOPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + 1 << 31, 1 << 31); /* CLK COMP Overrides */ /* RCOMP PU */ mrc_alt_write_mask(DDRPHY, - (CLKDRVPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0C << 16)), - (BIT31 | (0x0B << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CLKDRVPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0c << 16), + 0x801f0000); /* RCOMP PD */ mrc_alt_write_mask(DDRPHY, - (CLKDRVPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0C << 16)), - (BIT31 | (0x0B << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CLKDRVPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0c << 16), + 0x801f0000); /* DCOMP PU */ mrc_alt_write_mask(DDRPHY, - (CLKDLYPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x07 << 16)), - (BIT31 | (0x0B << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CLKDLYPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x07 << 16), + 0x801f0000); /* DCOMP PD */ mrc_alt_write_mask(DDRPHY, - (CLKDLYPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x07 << 16)), - (BIT31 | (0x0B << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CLKDLYPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x07 << 16), + 0x801f0000); /* ODTCOMP PU */ mrc_alt_write_mask(DDRPHY, - (CLKODTPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0B << 16)), - (BIT31 | (0x0B << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CLKODTPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0b << 16), + 0x801f0000); /* ODTCOMP PD */ mrc_alt_write_mask(DDRPHY, - (CLKODTPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0B << 16)), - (BIT31 | (0x0B << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CLKODTPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0b << 16), + 0x801f0000); /* TCOCOMP PU */ mrc_alt_write_mask(DDRPHY, - (CLKTCOPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31), (BIT31)); + CLKTCOPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + 1 << 31, 1 << 31); /* TCOCOMP PD */ mrc_alt_write_mask(DDRPHY, - (CLKTCOPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31), (BIT31)); + CLKTCOPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + 1 << 31, 1 << 31); /* CMD COMP Overrides */ /* RCOMP PU */ mrc_alt_write_mask(DDRPHY, - (CMDDRVPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0D << 16)), - (BIT31 | BIT21 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CMDDRVPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0d << 16), + 0x803f0000); /* RCOMP PD */ mrc_alt_write_mask(DDRPHY, - (CMDDRVPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0D << 16)), - (BIT31 | BIT21 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CMDDRVPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0d << 16), + 0x803f0000); /* DCOMP PU */ mrc_alt_write_mask(DDRPHY, - (CMDDLYPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0A << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CMDDLYPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0a << 16), + 0x801f0000); /* DCOMP PD */ mrc_alt_write_mask(DDRPHY, - (CMDDLYPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0A << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CMDDLYPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0a << 16), + 0x801f0000); /* CTL COMP Overrides */ /* RCOMP PU */ mrc_alt_write_mask(DDRPHY, - (CTLDRVPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0D << 16)), - (BIT31 | BIT21 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CTLDRVPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0d << 16), + 0x803f0000); /* RCOMP PD */ mrc_alt_write_mask(DDRPHY, - (CTLDRVPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0D << 16)), - (BIT31 | BIT21 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CTLDRVPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0d << 16), + 0x803f0000); /* DCOMP PU */ mrc_alt_write_mask(DDRPHY, - (CTLDLYPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0A << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CTLDLYPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0a << 16), + 0x801f0000); /* DCOMP PD */ mrc_alt_write_mask(DDRPHY, - (CTLDLYPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x0A << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CTLDLYPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x0a << 16), + 0x801f0000); #else /* DQ TCOCOMP Overrides */ /* TCOCOMP PU */ mrc_alt_write_mask(DDRPHY, - (DQTCOPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x1F << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQTCOPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x1f << 16), + 0x801f0000); /* TCOCOMP PD */ mrc_alt_write_mask(DDRPHY, - (DQTCOPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x1F << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQTCOPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x1f << 16), + 0x801f0000); /* DQS TCOCOMP Overrides */ /* TCOCOMP PU */ mrc_alt_write_mask(DDRPHY, - (DQSTCOPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x1F << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQSTCOPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x1f << 16), + 0x801f0000); /* TCOCOMP PD */ mrc_alt_write_mask(DDRPHY, - (DQSTCOPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x1F << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + DQSTCOPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x1f << 16), + 0x801f0000); /* CLK TCOCOMP Overrides */ /* TCOCOMP PU */ mrc_alt_write_mask(DDRPHY, - (CLKTCOPUCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x1F << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CLKTCOPUCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x1f << 16), + 0x801f0000); /* TCOCOMP PD */ mrc_alt_write_mask(DDRPHY, - (CLKTCOPDCTLCH0 + (ch * DDRCOMP_CH_OFFSET)), - (BIT31 | (0x1F << 16)), - (BIT31 | BIT20 | BIT19 | - BIT18 | BIT17 | BIT16)); + CLKTCOPDCTLCH0 + ch * DDRCOMP_CH_OFFSET, + (1 << 31) | (0x1f << 16), + 0x801f0000); #endif /* program STATIC delays */ @@ -962,7 +845,7 @@ void ddrphy_init(struct mrc_params *mrc_params) #endif for (rk = 0; rk < NUM_RANKS; rk++) { - if (mrc_params->rank_enables & (1<<rk)) { + if (mrc_params->rank_enables & (1 << rk)) { set_wclk(ch, rk, ddr_wclk[PLATFORM_ID]); #ifdef BACKUP_WCTL set_wctl(ch, rk, ddr_wctl[PLATFORM_ID]); @@ -976,86 +859,80 @@ void ddrphy_init(struct mrc_params *mrc_params) /* COMP (non channel specific) */ /* RCOMP: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (DQANADRVPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQANADRVPUCTL, 1 << 30, 1 << 30); /* RCOMP: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (DQANADRVPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQANADRVPDCTL, 1 << 30, 1 << 30); /* RCOMP: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (CMDANADRVPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CMDANADRVPUCTL, 1 << 30, 1 << 30); /* RCOMP: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (CMDANADRVPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CMDANADRVPDCTL, 1 << 30, 1 << 30); /* RCOMP: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (CLKANADRVPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CLKANADRVPUCTL, 1 << 30, 1 << 30); /* RCOMP: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (CLKANADRVPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CLKANADRVPDCTL, 1 << 30, 1 << 30); /* RCOMP: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (DQSANADRVPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQSANADRVPUCTL, 1 << 30, 1 << 30); /* RCOMP: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (DQSANADRVPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQSANADRVPDCTL, 1 << 30, 1 << 30); /* RCOMP: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (CTLANADRVPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CTLANADRVPUCTL, 1 << 30, 1 << 30); /* RCOMP: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (CTLANADRVPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CTLANADRVPDCTL, 1 << 30, 1 << 30); /* ODT: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (DQANAODTPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQANAODTPUCTL, 1 << 30, 1 << 30); /* ODT: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (DQANAODTPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQANAODTPDCTL, 1 << 30, 1 << 30); /* ODT: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (CLKANAODTPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CLKANAODTPUCTL, 1 << 30, 1 << 30); /* ODT: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (CLKANAODTPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CLKANAODTPDCTL, 1 << 30, 1 << 30); /* ODT: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (DQSANAODTPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQSANAODTPUCTL, 1 << 30, 1 << 30); /* ODT: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (DQSANAODTPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQSANAODTPDCTL, 1 << 30, 1 << 30); /* DCOMP: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (DQANADLYPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQANADLYPUCTL, 1 << 30, 1 << 30); /* DCOMP: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (DQANADLYPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQANADLYPDCTL, 1 << 30, 1 << 30); /* DCOMP: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (CMDANADLYPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CMDANADLYPUCTL, 1 << 30, 1 << 30); /* DCOMP: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (CMDANADLYPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CMDANADLYPDCTL, 1 << 30, 1 << 30); /* DCOMP: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (CLKANADLYPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CLKANADLYPUCTL, 1 << 30, 1 << 30); /* DCOMP: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (CLKANADLYPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CLKANADLYPDCTL, 1 << 30, 1 << 30); /* DCOMP: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (DQSANADLYPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQSANADLYPUCTL, 1 << 30, 1 << 30); /* DCOMP: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (DQSANADLYPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQSANADLYPDCTL, 1 << 30, 1 << 30); /* DCOMP: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (CTLANADLYPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CTLANADLYPUCTL, 1 << 30, 1 << 30); /* DCOMP: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (CTLANADLYPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CTLANADLYPDCTL, 1 << 30, 1 << 30); /* TCO: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (DQANATCOPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQANATCOPUCTL, 1 << 30, 1 << 30); /* TCO: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (DQANATCOPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQANATCOPDCTL, 1 << 30, 1 << 30); /* TCO: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (CLKANATCOPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CLKANATCOPUCTL, 1 << 30, 1 << 30); /* TCO: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (CLKANATCOPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, CLKANATCOPDCTL, 1 << 30, 1 << 30); /* TCO: Dither PU Enable */ - mrc_alt_write_mask(DDRPHY, (DQSANATCOPUCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQSANATCOPUCTL, 1 << 30, 1 << 30); /* TCO: Dither PD Enable */ - mrc_alt_write_mask(DDRPHY, (DQSANATCOPDCTL), (BIT30), (BIT30)); + mrc_alt_write_mask(DDRPHY, DQSANATCOPDCTL, 1 << 30, 1 << 30); /* TCOCOMP: Pulse Count */ - mrc_alt_write_mask(DDRPHY, (TCOCNTCTRL), (0x1 << 0), (BIT1 | BIT0)); + mrc_alt_write_mask(DDRPHY, TCOCNTCTRL, 1, 3); /* ODT: CMD/CTL PD/PU */ - mrc_alt_write_mask(DDRPHY, - (CHNLBUFSTATIC), ((0x03 << 24) | (0x03 << 16)), - (BIT28 | BIT27 | BIT26 | BIT25 | BIT24 | - BIT20 | BIT19 | BIT18 | BIT17 | BIT16)); + mrc_alt_write_mask(DDRPHY, CHNLBUFSTATIC, + (0x03 << 24) | (0x03 << 16), 0x1f1f0000); /* Set 1us counter */ - mrc_alt_write_mask(DDRPHY, - (MSCNTR), (0x64 << 0), - (BIT7 | BIT6 | BIT5 | BIT4 | BIT3 | BIT2 | BIT1 | BIT0)); - mrc_alt_write_mask(DDRPHY, - (LATCH1CTL), (0x1 << 28), - (BIT30 | BIT29 | BIT28)); + mrc_alt_write_mask(DDRPHY, MSCNTR, 0x64, 0xff); + mrc_alt_write_mask(DDRPHY, LATCH1CTL, 0x1 << 28, 0x70000000); /* Release PHY from reset */ - mrc_alt_write_mask(DDRPHY, MASTERRSTN, BIT0, BIT0); + mrc_alt_write_mask(DDRPHY, MASTERRSTN, 1, 1); /* STEP1 */ mrc_post_code(0x03, 0x11); @@ -1064,30 +941,30 @@ void ddrphy_init(struct mrc_params *mrc_params) if (mrc_params->channel_enables & (1 << ch)) { /* DQ01-DQ23 */ for (bl_grp = 0; - bl_grp < ((NUM_BYTE_LANES / bl_divisor) / 2); + bl_grp < (NUM_BYTE_LANES / bl_divisor) / 2; bl_grp++) { mrc_alt_write_mask(DDRPHY, - (DQMDLLCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - (BIT13), - (BIT13)); /* Enable VREG */ + DQMDLLCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + 1 << 13, + 1 << 13); /* Enable VREG */ delay_n(3); } /* ECC */ - mrc_alt_write_mask(DDRPHY, (ECCMDLLCTL), - (BIT13), (BIT13)); /* Enable VREG */ + mrc_alt_write_mask(DDRPHY, ECCMDLLCTL, + 1 << 13, 1 << 13); /* Enable VREG */ delay_n(3); /* CMD */ mrc_alt_write_mask(DDRPHY, - (CMDMDLLCTL + (ch * DDRIOCCC_CH_OFFSET)), - (BIT13), (BIT13)); /* Enable VREG */ + CMDMDLLCTL + ch * DDRIOCCC_CH_OFFSET, + 1 << 13, 1 << 13); /* Enable VREG */ delay_n(3); /* CLK-CTL */ mrc_alt_write_mask(DDRPHY, - (CCMDLLCTL + (ch * DDRIOCCC_CH_OFFSET)), - (BIT13), (BIT13)); /* Enable VREG */ + CCMDLLCTL + ch * DDRIOCCC_CH_OFFSET, + 1 << 13, 1 << 13); /* Enable VREG */ delay_n(3); } } @@ -1100,30 +977,30 @@ void ddrphy_init(struct mrc_params *mrc_params) if (mrc_params->channel_enables & (1 << ch)) { /* DQ01-DQ23 */ for (bl_grp = 0; - bl_grp < ((NUM_BYTE_LANES / bl_divisor) / 2); + bl_grp < (NUM_BYTE_LANES / bl_divisor) / 2; bl_grp++) { mrc_alt_write_mask(DDRPHY, - (DQMDLLCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - (BIT17), - (BIT17)); /* Enable MCDLL */ + DQMDLLCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + 1 << 17, + 1 << 17); /* Enable MCDLL */ delay_n(50); } /* ECC */ - mrc_alt_write_mask(DDRPHY, (ECCMDLLCTL), - (BIT17), (BIT17)); /* Enable MCDLL */ + mrc_alt_write_mask(DDRPHY, ECCMDLLCTL, + 1 << 17, 1 << 17); /* Enable MCDLL */ delay_n(50); /* CMD */ mrc_alt_write_mask(DDRPHY, - (CMDMDLLCTL + (ch * DDRIOCCC_CH_OFFSET)), - (BIT18), (BIT18)); /* Enable MCDLL */ + CMDMDLLCTL + ch * DDRIOCCC_CH_OFFSET, + 1 << 18, 1 << 18); /* Enable MCDLL */ delay_n(50); /* CLK-CTL */ mrc_alt_write_mask(DDRPHY, - (CCMDLLCTL + (ch * DDRIOCCC_CH_OFFSET)), - (BIT18), (BIT18)); /* Enable MCDLL */ + CCMDLLCTL + ch * DDRIOCCC_CH_OFFSET, + 1 << 18, 1 << 18); /* Enable MCDLL */ delay_n(50); } } @@ -1136,54 +1013,47 @@ void ddrphy_init(struct mrc_params *mrc_params) if (mrc_params->channel_enables & (1 << ch)) { /* DQ01-DQ23 */ for (bl_grp = 0; - bl_grp < ((NUM_BYTE_LANES / bl_divisor) / 2); + bl_grp < (NUM_BYTE_LANES / bl_divisor) / 2; bl_grp++) { #ifdef FORCE_16BIT_DDRIO - temp = ((bl_grp) && + temp = (bl_grp && (mrc_params->channel_width == X16)) ? - ((0x1 << 12) | (0x1 << 8) | - (0xF << 4) | (0xF << 0)) : - ((0xF << 12) | (0xF << 8) | - (0xF << 4) | (0xF << 0)); + 0x11ff : 0xffff; #else - temp = ((0xF << 12) | (0xF << 8) | - (0xF << 4) | (0xF << 0)); + temp = 0xffff; #endif /* Enable TXDLL */ mrc_alt_write_mask(DDRPHY, - (DQDLLTXCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - temp, 0xFFFF); + DQDLLTXCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + temp, 0xffff); delay_n(3); /* Enable RXDLL */ mrc_alt_write_mask(DDRPHY, - (DQDLLRXCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - (BIT3 | BIT2 | BIT1 | BIT0), - (BIT3 | BIT2 | BIT1 | BIT0)); + DQDLLRXCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + 0xf, 0xf); delay_n(3); /* Enable RXDLL Overrides BL0 */ mrc_alt_write_mask(DDRPHY, - (B0OVRCTL + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - (BIT3 | BIT2 | BIT1 | BIT0), - (BIT3 | BIT2 | BIT1 | BIT0)); + B0OVRCTL + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + 0xf, 0xf); } /* ECC */ - temp = ((0xF << 12) | (0xF << 8) | - (0xF << 4) | (0xF << 0)); - mrc_alt_write_mask(DDRPHY, (ECCDLLTXCTL), - temp, 0xFFFF); + temp = 0xffff; + mrc_alt_write_mask(DDRPHY, ECCDLLTXCTL, + temp, 0xffff); delay_n(3); /* CMD (PO) */ mrc_alt_write_mask(DDRPHY, - (CMDDLLTXCTL + (ch * DDRIOCCC_CH_OFFSET)), - temp, 0xFFFF); + CMDDLLTXCTL + ch * DDRIOCCC_CH_OFFSET, + temp, 0xffff); delay_n(3); } } @@ -1195,94 +1065,85 @@ void ddrphy_init(struct mrc_params *mrc_params) if (mrc_params->channel_enables & (1 << ch)) { /* Host To Memory Clock Alignment (HMC) for 800/1066 */ for (bl_grp = 0; - bl_grp < ((NUM_BYTE_LANES / bl_divisor) / 2); + bl_grp < (NUM_BYTE_LANES / bl_divisor) / 2; bl_grp++) { /* CLK_ALIGN_MOD_ID */ mrc_alt_write_mask(DDRPHY, - (DQCLKALIGNREG2 + - (bl_grp * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - (bl_grp) ? (0x3) : (0x1), - (BIT3 | BIT2 | BIT1 | BIT0)); + DQCLKALIGNREG2 + + bl_grp * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + bl_grp ? 3 : 1, + 0xf); } mrc_alt_write_mask(DDRPHY, - (ECCCLKALIGNREG2 + (ch * DDRIODQ_CH_OFFSET)), - 0x2, - (BIT3 | BIT2 | BIT1 | BIT0)); + ECCCLKALIGNREG2 + ch * DDRIODQ_CH_OFFSET, + 0x2, 0xf); mrc_alt_write_mask(DDRPHY, - (CMDCLKALIGNREG2 + (ch * DDRIODQ_CH_OFFSET)), - 0x0, - (BIT3 | BIT2 | BIT1 | BIT0)); + CMDCLKALIGNREG2 + ch * DDRIODQ_CH_OFFSET, + 0x0, 0xf); mrc_alt_write_mask(DDRPHY, - (CCCLKALIGNREG2 + (ch * DDRIODQ_CH_OFFSET)), - 0x2, - (BIT3 | BIT2 | BIT1 | BIT0)); + CCCLKALIGNREG2 + ch * DDRIODQ_CH_OFFSET, + 0x2, 0xf); mrc_alt_write_mask(DDRPHY, - (CMDCLKALIGNREG0 + (ch * DDRIOCCC_CH_OFFSET)), - (0x2 << 4), (BIT5 | BIT4)); + CMDCLKALIGNREG0 + ch * DDRIOCCC_CH_OFFSET, + 0x20, 0x30); /* * NUM_SAMPLES, MAX_SAMPLES, * MACRO_PI_STEP, MICRO_PI_STEP */ mrc_alt_write_mask(DDRPHY, - (CMDCLKALIGNREG1 + (ch * DDRIOCCC_CH_OFFSET)), - ((0x18 << 16) | (0x10 << 8) | - (0x8 << 2) | (0x1 << 0)), - (BIT22 | BIT21 | BIT20 | BIT19 | BIT18 | BIT17 | - BIT16 | BIT14 | BIT13 | BIT12 | BIT11 | BIT10 | - BIT9 | BIT8 | BIT7 | BIT6 | BIT5 | BIT4 | BIT3 | - BIT2 | BIT1 | BIT0)); + CMDCLKALIGNREG1 + ch * DDRIOCCC_CH_OFFSET, + (0x18 << 16) | (0x10 << 8) | + (0x8 << 2) | (0x1 << 0), + 0x007f7fff); /* TOTAL_NUM_MODULES, FIRST_U_PARTITION */ mrc_alt_write_mask(DDRPHY, - (CMDCLKALIGNREG2 + (ch * DDRIOCCC_CH_OFFSET)), - ((0x10 << 16) | (0x4 << 8) | (0x2 << 4)), - (BIT20 | BIT19 | BIT18 | BIT17 | BIT16 | - BIT11 | BIT10 | BIT9 | BIT8 | BIT7 | BIT6 | - BIT5 | BIT4)); + CMDCLKALIGNREG2 + ch * DDRIOCCC_CH_OFFSET, + (0x10 << 16) | (0x4 << 8) | (0x2 << 4), + 0x001f0ff0); #ifdef HMC_TEST /* START_CLK_ALIGN=1 */ mrc_alt_write_mask(DDRPHY, - (CMDCLKALIGNREG0 + (ch * DDRIOCCC_CH_OFFSET)), - BIT24, BIT24); + CMDCLKALIGNREG0 + ch * DDRIOCCC_CH_OFFSET, + 1 << 24, 1 << 24); while (msg_port_alt_read(DDRPHY, - (CMDCLKALIGNREG0 + (ch * DDRIOCCC_CH_OFFSET))) & - BIT24) + CMDCLKALIGNREG0 + ch * DDRIOCCC_CH_OFFSET) & + (1 << 24)) ; /* wait for START_CLK_ALIGN=0 */ #endif /* Set RD/WR Pointer Seperation & COUNTEN & FIFOPTREN */ mrc_alt_write_mask(DDRPHY, - (CMDPTRREG + (ch * DDRIOCCC_CH_OFFSET)), - BIT0, BIT0); /* WRPTRENABLE=1 */ + CMDPTRREG + ch * DDRIOCCC_CH_OFFSET, + 1, 1); /* WRPTRENABLE=1 */ /* COMP initial */ /* enable bypass for CLK buffer (PO) */ mrc_alt_write_mask(DDRPHY, - (COMPEN0CH0 + (ch * DDRCOMP_CH_OFFSET)), - BIT5, BIT5); + COMPEN0CH0 + ch * DDRCOMP_CH_OFFSET, + 1 << 5, 1 << 5); /* Initial COMP Enable */ - mrc_alt_write_mask(DDRPHY, (CMPCTRL), - (BIT0), (BIT0)); + mrc_alt_write_mask(DDRPHY, CMPCTRL, 1, 1); /* wait for Initial COMP Enable = 0 */ - while (msg_port_alt_read(DDRPHY, (CMPCTRL)) & BIT0) + while (msg_port_alt_read(DDRPHY, CMPCTRL) & 1) ; /* disable bypass for CLK buffer (PO) */ mrc_alt_write_mask(DDRPHY, - (COMPEN0CH0 + (ch * DDRCOMP_CH_OFFSET)), - ~BIT5, BIT5); + COMPEN0CH0 + ch * DDRCOMP_CH_OFFSET, + ~(1 << 5), 1 << 5); /* IOBUFACT */ /* STEP4a */ mrc_alt_write_mask(DDRPHY, - (CMDCFGREG0 + (ch * DDRIOCCC_CH_OFFSET)), - BIT2, BIT2); /* IOBUFACTRST_N=1 */ + CMDCFGREG0 + ch * DDRIOCCC_CH_OFFSET, + 1 << 2, 1 << 2); /* IOBUFACTRST_N=1 */ /* DDRPHY initialization complete */ mrc_alt_write_mask(DDRPHY, - (CMDPMCONFIG0 + (ch * DDRIOCCC_CH_OFFSET)), - BIT20, BIT20); /* SPID_INIT_COMPLETE=1 */ + CMDPMCONFIG0 + ch * DDRIOCCC_CH_OFFSET, + 1 << 20, 1 << 20); /* SPID_INIT_COMPLETE=1 */ } } @@ -1308,13 +1169,13 @@ void perform_jedec_init(struct mrc_params *mrc_params) mrc_post_code(0x04, 0x00); /* DDR3_RESET_SET=0, DDR3_RESET_RESET=1 */ - mrc_alt_write_mask(DDRPHY, CCDDR3RESETCTL, BIT1, (BIT8 | BIT1)); + mrc_alt_write_mask(DDRPHY, CCDDR3RESETCTL, 2, 0x102); /* Assert RESET# for 200us */ delay_u(200); /* DDR3_RESET_SET=1, DDR3_RESET_RESET=0 */ - mrc_alt_write_mask(DDRPHY, CCDDR3RESETCTL, BIT8, (BIT8 | BIT1)); + mrc_alt_write_mask(DDRPHY, CCDDR3RESETCTL, 0x100, 0x102); dtr0 = msg_port_read(MEM_CTLR, DTR0); @@ -1327,8 +1188,8 @@ void perform_jedec_init(struct mrc_params *mrc_params) drp &= 0x3; drmc = msg_port_read(MEM_CTLR, DRMC); - drmc &= 0xFFFFFFFC; - drmc |= (BIT4 | drp); + drmc &= 0xfffffffc; + drmc |= (DRMC_CKEMODE | drp); msg_port_write(MEM_CTLR, DRMC, drmc); @@ -1341,7 +1202,7 @@ void perform_jedec_init(struct mrc_params *mrc_params) } msg_port_write(MEM_CTLR, DRMC, - (mrc_params->rd_odt_value == 0 ? BIT12 : 0)); + (mrc_params->rd_odt_value == 0 ? DRMC_ODTMODE : 0)); /* * setup for emrs 2 @@ -1392,12 +1253,12 @@ void perform_jedec_init(struct mrc_params *mrc_params) * 1** --> RESERVED */ emrs1_cmd |= (1 << 3); - emrs1_cmd &= ~BIT6; + emrs1_cmd &= ~(1 << 6); if (mrc_params->ron_value == 0) - emrs1_cmd |= BIT7; + emrs1_cmd |= (1 << 7); else - emrs1_cmd &= ~BIT7; + emrs1_cmd &= ~(1 << 7); if (mrc_params->rtt_nom_value == 0) emrs1_cmd |= (DDR3_EMRS1_RTTNOM_40 << 6); @@ -1432,8 +1293,8 @@ void perform_jedec_init(struct mrc_params *mrc_params) * BIT[02:02] "0" if oem_tCAS <= 11 (1866?) * BIT[06:04] use oem_tCAS-4 */ - mrs0_cmd |= BIT14; - mrs0_cmd |= BIT18; + mrs0_cmd |= (1 << 14); + mrs0_cmd |= (1 << 18); mrs0_cmd |= ((((dtr0 >> 12) & 7) + 1) << 10); tck = t_ck[mrc_params->ddr_speed]; @@ -1480,8 +1341,8 @@ void set_ddr_init_complete(struct mrc_params *mrc_params) ENTERFN(); dco = msg_port_read(MEM_CTLR, DCO); - dco &= ~BIT28; - dco |= BIT31; + dco &= ~DCO_PMICTL; + dco |= DCO_IC; msg_port_write(MEM_CTLR, DCO, dco); LEAVEFN(); @@ -1577,7 +1438,7 @@ void rcvn_cal(struct mrc_params *mrc_params) /* need separate burst to sample DQS preamble */ dtr1 = msg_port_read(MEM_CTLR, DTR1); dtr1_save = dtr1; - dtr1 |= BIT12; + dtr1 |= DTR1_TCCD_12CLK; msg_port_write(MEM_CTLR, DTR1, dtr1); #endif @@ -1596,7 +1457,7 @@ void rcvn_cal(struct mrc_params *mrc_params) * POST_CODE here indicates the current * channel and rank being calibrated */ - mrc_post_code(0x05, (0x10 + ((ch << 4) | rk))); + mrc_post_code(0x05, 0x10 + ((ch << 4) | rk)); #ifdef BACKUP_RCVN /* et hard-coded timing values */ @@ -1606,10 +1467,10 @@ void rcvn_cal(struct mrc_params *mrc_params) /* enable FIFORST */ for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl += 2) { mrc_alt_write_mask(DDRPHY, - (B01PTRCTL1 + - ((bl >> 1) * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - 0, BIT8); + B01PTRCTL1 + + (bl >> 1) * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + 0, 1 << 8); } /* initialize the starting delay to 128 PI (cas +1 CLK) */ for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { @@ -1638,11 +1499,11 @@ void rcvn_cal(struct mrc_params *mrc_params) } else { /* not enough delay */ training_message(ch, rk, bl); - mrc_post_code(0xEE, 0x50); + mrc_post_code(0xee, 0x50); } } } - } while (temp & 0xFF); + } while (temp & 0xff); #ifdef R2R_SHARING /* increment "num_ranks_enabled" */ @@ -1653,7 +1514,7 @@ void rcvn_cal(struct mrc_params *mrc_params) /* add "delay[]" values to "final_delay[][]" for rolling average */ final_delay[ch][bl] += delay[bl]; /* set timing based on rolling average values */ - set_rcvn(ch, rk, bl, ((final_delay[ch][bl]) / num_ranks_enabled)); + set_rcvn(ch, rk, bl, final_delay[ch][bl] / num_ranks_enabled); } #else /* Finally increment delay by 32 PI (1/4 CLK) to place in center of preamble */ @@ -1666,10 +1527,10 @@ void rcvn_cal(struct mrc_params *mrc_params) /* disable FIFORST */ for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl += 2) { mrc_alt_write_mask(DDRPHY, - (B01PTRCTL1 + - ((bl >> 1) * DDRIODQ_BL_OFFSET) + - (ch * DDRIODQ_CH_OFFSET)), - BIT8, BIT8); + B01PTRCTL1 + + (bl >> 1) * DDRIODQ_BL_OFFSET + + ch * DDRIODQ_CH_OFFSET, + 1 << 8, 1 << 8); } #endif } @@ -1742,12 +1603,12 @@ void wr_level(struct mrc_params *mrc_params) * POST_CODE here indicates the current * rank and channel being calibrated */ - mrc_post_code(0x06, (0x10 + ((ch << 4) | rk))); + mrc_post_code(0x06, 0x10 + ((ch << 4) | rk)); #ifdef BACKUP_WDQS for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { set_wdqs(ch, rk, bl, ddr_wdqs[PLATFORM_ID]); - set_wdq(ch, rk, bl, (ddr_wdqs[PLATFORM_ID] - QRTR_CLK)); + set_wdq(ch, rk, bl, ddr_wdqs[PLATFORM_ID] - QRTR_CLK); } #else /* @@ -1760,7 +1621,7 @@ void wr_level(struct mrc_params *mrc_params) * enable Write Levelling Mode * (EMRS1 w/ Write Levelling Mode Enable) */ - dram_init_command(DCMD_MRS1(rk, 0x0082)); + dram_init_command(DCMD_MRS1(rk, 0x82)); /* * set ODT DRAM Full Time Termination @@ -1769,24 +1630,24 @@ void wr_level(struct mrc_params *mrc_params) dtr4 = msg_port_read(MEM_CTLR, DTR4); dtr4_save = dtr4; - dtr4 |= BIT15; + dtr4 |= DTR4_ODTDIS; msg_port_write(MEM_CTLR, DTR4, dtr4); - for (bl = 0; bl < ((NUM_BYTE_LANES / bl_divisor) / 2); bl++) { + for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor) / 2; bl++) { /* * Enable Sandy Bridge Mode (WDQ Tri-State) & * Ensure 5 WDQS pulses during Write Leveling */ mrc_alt_write_mask(DDRPHY, - DQCTL + (DDRIODQ_BL_OFFSET * bl) + (DDRIODQ_CH_OFFSET * ch), - (BIT28 | BIT8 | BIT6 | BIT4 | BIT2), - (BIT28 | BIT9 | BIT8 | BIT7 | BIT6 | BIT5 | BIT4 | BIT3 | BIT2)); + DQCTL + DDRIODQ_BL_OFFSET * bl + DDRIODQ_CH_OFFSET * ch, + 0x10000154, + 0x100003fc); } /* Write Leveling Mode enabled in IO */ mrc_alt_write_mask(DDRPHY, - CCDDR3RESETCTL + (DDRIOCCC_CH_OFFSET * ch), - BIT16, BIT16); + CCDDR3RESETCTL + DDRIOCCC_CH_OFFSET * ch, + 1 << 16, 1 << 16); /* Initialize the starting delay to WCLK */ for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { @@ -1804,15 +1665,15 @@ void wr_level(struct mrc_params *mrc_params) /* disable Write Levelling Mode */ mrc_alt_write_mask(DDRPHY, - CCDDR3RESETCTL + (DDRIOCCC_CH_OFFSET * ch), - 0, BIT16); + CCDDR3RESETCTL + DDRIOCCC_CH_OFFSET * ch, + 0, 1 << 16); - for (bl = 0; bl < ((NUM_BYTE_LANES / bl_divisor) / 2); bl++) { + for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor) / 2; bl++) { /* Disable Sandy Bridge Mode & Ensure 4 WDQS pulses during normal operation */ mrc_alt_write_mask(DDRPHY, - DQCTL + (DDRIODQ_BL_OFFSET * bl) + (DDRIODQ_CH_OFFSET * ch), - (BIT8 | BIT6 | BIT4 | BIT2), - (BIT28 | BIT9 | BIT8 | BIT7 | BIT6 | BIT5 | BIT4 | BIT3 | BIT2)); + DQCTL + DDRIODQ_BL_OFFSET * bl + DDRIODQ_CH_OFFSET * ch, + 0x00000154, + 0x100003fc); } /* restore original DTR4 */ @@ -1830,7 +1691,7 @@ void wr_level(struct mrc_params *mrc_params) */ dram_init_command(DCMD_PREA(rk)); - mrc_post_code(0x06, (0x30 + ((ch << 4) | rk))); + mrc_post_code(0x06, 0x30 + ((ch << 4) | rk)); /* * COARSE WRITE LEVEL: @@ -1863,13 +1724,13 @@ void wr_level(struct mrc_params *mrc_params) coarse_result = check_rw_coarse(mrc_params, address); /* check for failures and margin the byte lane back 128 PI (1 CLK) */ - for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { + for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) { if (coarse_result & (coarse_result_mask << bl)) { all_edges_found = false; delay[bl] -= FULL_CLK; set_wdqs(ch, rk, bl, delay[bl]); /* program WDQ timings based on WDQS (WDQ = WDQS - 32 PI) */ - set_wdq(ch, rk, bl, (delay[bl] - QRTR_CLK)); + set_wdq(ch, rk, bl, delay[bl] - QRTR_CLK); } } } while (!all_edges_found); @@ -1878,11 +1739,11 @@ void wr_level(struct mrc_params *mrc_params) /* increment "num_ranks_enabled" */ num_ranks_enabled++; /* accumulate "final_delay[][]" values from "delay[]" values for rolling average */ - for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { + for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) { final_delay[ch][bl] += delay[bl]; - set_wdqs(ch, rk, bl, ((final_delay[ch][bl]) / num_ranks_enabled)); + set_wdqs(ch, rk, bl, final_delay[ch][bl] / num_ranks_enabled); /* program WDQ timings based on WDQS (WDQ = WDQS - 32 PI) */ - set_wdq(ch, rk, bl, ((final_delay[ch][bl]) / num_ranks_enabled) - QRTR_CLK); + set_wdq(ch, rk, bl, final_delay[ch][bl] / num_ranks_enabled - QRTR_CLK); } #endif #endif @@ -1901,9 +1762,9 @@ void prog_page_ctrl(struct mrc_params *mrc_params) ENTERFN(); dpmc0 = msg_port_read(MEM_CTLR, DPMC0); - dpmc0 &= ~(BIT16 | BIT17 | BIT18); + dpmc0 &= ~DPMC0_PCLSTO_MASK; dpmc0 |= (4 << 16); - dpmc0 |= BIT21; + dpmc0 |= DPMC0_PREAPWDEN; msg_port_write(MEM_CTLR, DPMC0, dpmc0); } @@ -1966,7 +1827,7 @@ void rd_train(struct mrc_params *mrc_params) for (rk = 0; rk < NUM_RANKS; rk++) { if (mrc_params->rank_enables & (1 << rk)) { for (bl = 0; - bl < (NUM_BYTE_LANES / bl_divisor); + bl < NUM_BYTE_LANES / bl_divisor; bl++) { set_rdqs(ch, rk, bl, ddr_rdqs[PLATFORM_ID]); } @@ -1981,7 +1842,7 @@ void rd_train(struct mrc_params *mrc_params) for (rk = 0; rk < NUM_RANKS; rk++) { if (mrc_params->rank_enables & (1 << rk)) { for (bl = 0; - bl < (NUM_BYTE_LANES / bl_divisor); + bl < NUM_BYTE_LANES / bl_divisor; bl++) { /* x_coordinate */ x_coordinate[L][B][ch][rk][bl] = RDQS_MIN; @@ -2011,7 +1872,7 @@ void rd_train(struct mrc_params *mrc_params) /* look for passing coordinates */ for (side_y = B; side_y <= T; side_y++) { for (side_x = L; side_x <= R; side_x++) { - mrc_post_code(0x07, (0x10 + (side_y * 2) + (side_x))); + mrc_post_code(0x07, 0x10 + side_y * 2 + side_x); /* find passing values */ for (ch = 0; ch < NUM_CHANNELS; ch++) { @@ -2021,7 +1882,7 @@ void rd_train(struct mrc_params *mrc_params) (0x1 << rk)) { /* set x/y_coordinate search starting settings */ for (bl = 0; - bl < (NUM_BYTE_LANES / bl_divisor); + bl < NUM_BYTE_LANES / bl_divisor; bl++) { set_rdqs(ch, rk, bl, x_coordinate[side_x][side_y][ch][rk][bl]); @@ -2041,9 +1902,9 @@ void rd_train(struct mrc_params *mrc_params) result = check_bls_ex(mrc_params, address); /* check for failures */ - if (result & 0xFF) { + if (result & 0xff) { /* at least 1 byte lane failed */ - for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { + for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) { if (result & (bl_mask << bl)) { /* adjust the RDQS values accordingly */ @@ -2072,13 +1933,13 @@ void rd_train(struct mrc_params *mrc_params) (y_coordinate[side_x][B][ch][bl] == y_coordinate[side_x][T][ch][bl])) { /* VREF_EYE collapsed below MIN_VREF_EYE */ training_message(ch, rk, bl); - mrc_post_code(0xEE, (0x70 + (side_y * 2) + (side_x))); + mrc_post_code(0xEE, 0x70 + side_y * 2 + side_x); } else { /* update the VREF setting */ set_vref(ch, bl, y_coordinate[side_x][side_y][ch][bl]); /* reset the X coordinate to begin the search at the new VREF */ x_coordinate[side_x][side_y][ch][rk][bl] = - (side_x == L) ? (RDQS_MIN) : (RDQS_MAX); + (side_x == L) ? RDQS_MIN : RDQS_MAX; } } @@ -2087,7 +1948,7 @@ void rd_train(struct mrc_params *mrc_params) } } } - } while (result & 0xFF); + } while (result & 0xff); } } } @@ -2147,23 +2008,23 @@ void rd_train(struct mrc_params *mrc_params) /* perform an eye check */ for (side_y = B; side_y <= T; side_y++) { for (side_x = L; side_x <= R; side_x++) { - mrc_post_code(0x07, (0x30 + (side_y * 2) + (side_x))); + mrc_post_code(0x07, 0x30 + side_y * 2 + side_x); /* update the settings for the eye check */ for (ch = 0; ch < NUM_CHANNELS; ch++) { if (mrc_params->channel_enables & (1 << ch)) { for (rk = 0; rk < NUM_RANKS; rk++) { if (mrc_params->rank_enables & (1 << rk)) { - for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { + for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) { if (side_x == L) - set_rdqs(ch, rk, bl, (x_center[ch][rk][bl] - (MIN_RDQS_EYE / 2))); + set_rdqs(ch, rk, bl, x_center[ch][rk][bl] - (MIN_RDQS_EYE / 2)); else - set_rdqs(ch, rk, bl, (x_center[ch][rk][bl] + (MIN_RDQS_EYE / 2))); + set_rdqs(ch, rk, bl, x_center[ch][rk][bl] + (MIN_RDQS_EYE / 2)); if (side_y == B) - set_vref(ch, bl, (y_center[ch][bl] - (MIN_VREF_EYE / 2))); + set_vref(ch, bl, y_center[ch][bl] - (MIN_VREF_EYE / 2)); else - set_vref(ch, bl, (y_center[ch][bl] + (MIN_VREF_EYE / 2))); + set_vref(ch, bl, y_center[ch][bl] + (MIN_VREF_EYE / 2)); } } } @@ -2174,9 +2035,9 @@ void rd_train(struct mrc_params *mrc_params) mrc_params->hte_setup = 1; /* check the eye */ - if (check_bls_ex(mrc_params, address) & 0xFF) { + if (check_bls_ex(mrc_params, address) & 0xff) { /* one or more byte lanes failed */ - mrc_post_code(0xEE, (0x74 + (side_x * 2) + (side_y))); + mrc_post_code(0xee, 0x74 + side_x * 2 + side_y); } } } @@ -2197,7 +2058,7 @@ void rd_train(struct mrc_params *mrc_params) /* x_coordinate */ #ifdef R2R_SHARING final_delay[ch][bl] += x_center[ch][rk][bl]; - set_rdqs(ch, rk, bl, ((final_delay[ch][bl]) / num_ranks_enabled)); + set_rdqs(ch, rk, bl, final_delay[ch][bl] / num_ranks_enabled); #else set_rdqs(ch, rk, bl, x_center[ch][rk][bl]); #endif @@ -2258,7 +2119,7 @@ void wr_train(struct mrc_params *mrc_params) for (rk = 0; rk < NUM_RANKS; rk++) { if (mrc_params->rank_enables & (1 << rk)) { for (bl = 0; - bl < (NUM_BYTE_LANES / bl_divisor); + bl < NUM_BYTE_LANES / bl_divisor; bl++) { set_wdq(ch, rk, bl, ddr_wdq[PLATFORM_ID]); } @@ -2273,7 +2134,7 @@ void wr_train(struct mrc_params *mrc_params) for (rk = 0; rk < NUM_RANKS; rk++) { if (mrc_params->rank_enables & (1 << rk)) { for (bl = 0; - bl < (NUM_BYTE_LANES / bl_divisor); + bl < NUM_BYTE_LANES / bl_divisor; bl++) { /* * want to start with @@ -2303,7 +2164,7 @@ void wr_train(struct mrc_params *mrc_params) * until no failures are observed, then repeat for the RIGHT side. */ for (side = L; side <= R; side++) { - mrc_post_code(0x08, (0x10 + (side))); + mrc_post_code(0x08, 0x10 + side); /* set starting values */ for (ch = 0; ch < NUM_CHANNELS; ch++) { @@ -2312,7 +2173,7 @@ void wr_train(struct mrc_params *mrc_params) if (mrc_params->rank_enables & (1 << rk)) { for (bl = 0; - bl < (NUM_BYTE_LANES / bl_divisor); + bl < NUM_BYTE_LANES / bl_divisor; bl++) { set_wdq(ch, rk, bl, delay[side][ch][rk][bl]); } @@ -2338,9 +2199,9 @@ void wr_train(struct mrc_params *mrc_params) /* result[07:00] == failing byte lane (MAX 8) */ result = check_bls_ex(mrc_params, address); /* check for failures */ - if (result & 0xFF) { + if (result & 0xff) { /* at least 1 byte lane failed */ - for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { + for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) { if (result & (bl_mask << bl)) { if (side == L) @@ -2362,13 +2223,13 @@ void wr_train(struct mrc_params *mrc_params) * notify the user and halt */ training_message(ch, rk, bl); - mrc_post_code(0xEE, (0x80 + side)); + mrc_post_code(0xee, 0x80 + side); } } } } /* stop when all byte lanes pass */ - } while (result & 0xFF); + } while (result & 0xff); } } } @@ -2384,7 +2245,7 @@ void wr_train(struct mrc_params *mrc_params) /* increment "num_ranks_enabled" */ num_ranks_enabled++; #endif - for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor); bl++) { + for (bl = 0; bl < NUM_BYTE_LANES / bl_divisor; bl++) { DPF(D_INFO, "WDQ eye rank%d lane%d : %d-%d\n", rk, bl, @@ -2396,7 +2257,7 @@ void wr_train(struct mrc_params *mrc_params) #ifdef R2R_SHARING final_delay[ch][bl] += temp; set_wdq(ch, rk, bl, - ((final_delay[ch][bl]) / num_ranks_enabled)); + final_delay[ch][bl] / num_ranks_enabled); #else set_wdq(ch, rk, bl, temp); #endif @@ -2470,7 +2331,7 @@ void enable_scrambling(struct mrc_params *mrc_params) * get seed from system clock * and make sure it is not all 1's */ - lfsr = rdtsc() & 0x0FFFFFFF; + lfsr = rdtsc() & 0x0fffffff; } else { /* * Need to replace scrambler @@ -2491,10 +2352,10 @@ void enable_scrambling(struct mrc_params *mrc_params) * In cold boot, we have the last 32bit LFSR which is the new seed. */ lfsr32(&lfsr); /* shift to next value */ - msg_port_write(MEM_CTLR, SCRMSEED, (lfsr & 0x0003FFFF)); + msg_port_write(MEM_CTLR, SCRMSEED, (lfsr & 0x0003ffff)); for (i = 0; i < 2; i++) - msg_port_write(MEM_CTLR, SCRMLO + i, (lfsr & 0xAAAAAAAA)); + msg_port_write(MEM_CTLR, SCRMLO + i, (lfsr & 0xaaaaaaaa)); LEAVEFN(); } @@ -2511,20 +2372,20 @@ void prog_ddr_control(struct mrc_params *mrc_params) ENTERFN(); dsch = msg_port_read(MEM_CTLR, DSCH); - dsch &= ~(BIT8 | BIT9 | BIT12); + dsch &= ~(DSCH_OOODIS | DSCH_OOOST3DIS | DSCH_NEWBYPDIS); msg_port_write(MEM_CTLR, DSCH, dsch); dpmc0 = msg_port_read(MEM_CTLR, DPMC0); - dpmc0 &= ~BIT25; + dpmc0 &= ~DPMC0_DISPWRDN; dpmc0 |= (mrc_params->power_down_disable << 25); - dpmc0 &= ~BIT24; - dpmc0 &= ~(BIT16 | BIT17 | BIT18); + dpmc0 &= ~DPMC0_CLKGTDIS; + dpmc0 &= ~DPMC0_PCLSTO_MASK; dpmc0 |= (4 << 16); - dpmc0 |= BIT21; + dpmc0 |= DPMC0_PREAPWDEN; msg_port_write(MEM_CTLR, DPMC0, dpmc0); /* CMDTRIST = 2h - CMD/ADDR are tristated when no valid command */ - mrc_write_mask(MEM_CTLR, DPMC1, 2 << 4, BIT4 | BIT5); + mrc_write_mask(MEM_CTLR, DPMC1, 0x20, 0x30); LEAVEFN(); } @@ -2542,14 +2403,14 @@ void prog_dra_drb(struct mrc_params *mrc_params) ENTERFN(); dco = msg_port_read(MEM_CTLR, DCO); - dco &= ~BIT31; + dco &= ~DCO_IC; msg_port_write(MEM_CTLR, DCO, dco); drp = 0; if (mrc_params->rank_enables & 1) - drp |= BIT0; + drp |= DRP_RKEN0; if (mrc_params->rank_enables & 2) - drp |= BIT1; + drp |= DRP_RKEN1; if (mrc_params->dram_width == X16) { drp |= (1 << 4); drp |= (1 << 9); @@ -2570,8 +2431,8 @@ void prog_dra_drb(struct mrc_params *mrc_params) msg_port_write(MEM_CTLR, DRP, drp); - dco &= ~BIT28; - dco |= BIT31; + dco &= ~DCO_PMICTL; + dco |= DCO_IC; msg_port_write(MEM_CTLR, DCO, dco); LEAVEFN(); @@ -2600,18 +2461,18 @@ void change_refresh_period(struct mrc_params *mrc_params) ENTERFN(); drfc = msg_port_read(MEM_CTLR, DRFC); - drfc &= ~(BIT12 | BIT13 | BIT14); + drfc &= ~DRFC_TREFI_MASK; drfc |= (mrc_params->refresh_rate << 12); - drfc |= BIT21; + drfc |= DRFC_REFDBTCLR; msg_port_write(MEM_CTLR, DRFC, drfc); dcal = msg_port_read(MEM_CTLR, DCAL); - dcal &= ~(BIT8 | BIT9 | BIT10); + dcal &= ~DCAL_ZQCINT_MASK; dcal |= (3 << 8); /* 63ms */ msg_port_write(MEM_CTLR, DCAL, dcal); dpmc0 = msg_port_read(MEM_CTLR, DPMC0); - dpmc0 |= (BIT23 | BIT29); + dpmc0 |= (DPMC0_DYNSREN | DPMC0_ENPHYCLKGATE); msg_port_write(MEM_CTLR, DPMC0, dpmc0); LEAVEFN(); @@ -2638,36 +2499,32 @@ void set_auto_refresh(struct mrc_params *mrc_params) for (channel = 0; channel < NUM_CHANNELS; channel++) { if (mrc_params->channel_enables & (1 << channel)) { /* Enable Periodic RCOMPS */ - mrc_alt_write_mask(DDRPHY, CMPCTRL, BIT1, BIT1); + mrc_alt_write_mask(DDRPHY, CMPCTRL, 2, 2); /* Enable Dynamic DiffAmp & Set Read ODT Value */ switch (mrc_params->rd_odt_value) { case 0: - temp = 0x3F; /* OFF */ + temp = 0x3f; /* OFF */ break; default: temp = 0x00; /* Auto */ break; } - for (bl = 0; bl < ((NUM_BYTE_LANES / bl_divisor) / 2); bl++) { + for (bl = 0; bl < (NUM_BYTE_LANES / bl_divisor) / 2; bl++) { /* Override: DIFFAMP, ODT */ mrc_alt_write_mask(DDRPHY, - (B0OVRCTL + (bl * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET)), - (0x00 << 16) | (temp << 10), - (BIT21 | BIT20 | BIT19 | BIT18 | - BIT17 | BIT16 | BIT15 | BIT14 | - BIT13 | BIT12 | BIT11 | BIT10)); + B0OVRCTL + bl * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET, + temp << 10, + 0x003ffc00); /* Override: DIFFAMP, ODT */ mrc_alt_write_mask(DDRPHY, - (B1OVRCTL + (bl * DDRIODQ_BL_OFFSET) + - (channel * DDRIODQ_CH_OFFSET)), - (0x00 << 16) | (temp << 10), - (BIT21 | BIT20 | BIT19 | BIT18 | - BIT17 | BIT16 | BIT15 | BIT14 | - BIT13 | BIT12 | BIT11 | BIT10)); + B1OVRCTL + bl * DDRIODQ_BL_OFFSET + + channel * DDRIODQ_CH_OFFSET, + temp << 10, + 0x003ffc00); } /* Issue ZQCS command */ @@ -2702,18 +2559,18 @@ void ecc_enable(struct mrc_params *mrc_params) /* Configuration required in ECC mode */ drp = msg_port_read(MEM_CTLR, DRP); - drp &= ~(BIT14 | BIT15); - drp |= BIT15; - drp |= BIT13; + drp &= ~DRP_ADDRMAP_MASK; + drp |= DRP_ADDRMAP_MAP1; + drp |= DRP_PRI64BSPLITEN; msg_port_write(MEM_CTLR, DRP, drp); /* Disable new request bypass */ dsch = msg_port_read(MEM_CTLR, DSCH); - dsch |= BIT12; + dsch |= DSCH_NEWBYPDIS; msg_port_write(MEM_CTLR, DSCH, dsch); /* Enable ECC */ - ecc_ctrl = (BIT0 | BIT1 | BIT17); + ecc_ctrl = (DECCCTRL_SBEEN | DECCCTRL_DBEEN | DECCCTRL_ENCBGEN); msg_port_write(MEM_CTLR, DECCCTRL, ecc_ctrl); /* Assume 8 bank memory, one bank is gone for ECC */ @@ -2756,8 +2613,8 @@ void lock_registers(struct mrc_params *mrc_params) ENTERFN(); dco = msg_port_read(MEM_CTLR, DCO); - dco &= ~(BIT28 | BIT29); - dco |= (BIT0 | BIT8); + dco &= ~(DCO_PMICTL | DCO_PMIDIS); + dco |= (DCO_DRPLOCK | DCO_CPGCLOCK); msg_port_write(MEM_CTLR, DCO, dco); LEAVEFN(); diff --git a/arch/x86/cpu/quark/smc.h b/arch/x86/cpu/quark/smc.h index 46017a1..1582b87 100644 --- a/arch/x86/cpu/quark/smc.h +++ b/arch/x86/cpu/quark/smc.h @@ -24,46 +24,133 @@ #define DPMC1 0x07 #define DRFC 0x08 #define DSCH 0x09 -#define DCAL 0x0A -#define DRMC 0x0B -#define PMSTS 0x0C -#define DCO 0x0F +#define DCAL 0x0a +#define DRMC 0x0b +#define PMSTS 0x0c +#define DCO 0x0f #define DSTAT 0x20 -#define SSKPD0 0x4A -#define SSKPD1 0x4B +#define SSKPD0 0x4a +#define SSKPD1 0x4b #define DECCCTRL 0x60 #define DECCSTAT 0x61 #define DECCSBECNT 0x62 #define DECCSBECA 0x68 #define DECCSBECS 0x69 -#define DECCDBECA 0x6A -#define DECCDBECS 0x6B +#define DECCDBECA 0x6a +#define DECCDBECS 0x6b #define DFUSESTAT 0x70 #define SCRMSEED 0x80 #define SCRMLO 0x81 #define SCRMHI 0x82 +/* DRP register defines */ +#define DRP_RKEN0 (1 << 0) +#define DRP_RKEN1 (1 << 1) +#define DRP_PRI64BSPLITEN (1 << 13) +#define DRP_ADDRMAP_MAP0 (1 << 14) +#define DRP_ADDRMAP_MAP1 (1 << 15) +#define DRP_ADDRMAP_MASK 0x0000c000 + +/* DTR0 register defines */ +#define DTR0_DFREQ_MASK 0x00000003 +#define DTR0_TRP_MASK 0x000000f0 +#define DTR0_TRCD_MASK 0x00000f00 +#define DTR0_TCL_MASK 0x00007000 + +/* DTR1 register defines */ +#define DTR1_TWCL_MASK 0x00000007 +#define DTR1_TCMD_MASK 0x00000030 +#define DTR1_TWTP_MASK 0x00000f00 +#define DTR1_TCCD_12CLK (1 << 12) +#define DTR1_TCCD_18CLK (1 << 13) +#define DTR1_TCCD_MASK 0x00003000 +#define DTR1_TFAW_MASK 0x000f0000 +#define DTR1_TRAS_MASK 0x00f00000 +#define DTR1_TRRD_MASK 0x03000000 +#define DTR1_TRTP_MASK 0x70000000 + +/* DTR2 register defines */ +#define DTR2_TRRDR_MASK 0x00000007 +#define DTR2_TWWDR_MASK 0x00000700 +#define DTR2_TRWDR_MASK 0x000f0000 + +/* DTR3 register defines */ +#define DTR3_TWRDR_MASK 0x00000007 +#define DTR3_TXXXX_MASK 0x00000070 +#define DTR3_TRWSR_MASK 0x00000f00 +#define DTR3_TWRSR_MASK 0x0001e000 +#define DTR3_TXP_MASK 0x00c00000 + +/* DTR4 register defines */ +#define DTR4_WRODTSTRT_MASK 0x00000003 +#define DTR4_WRODTSTOP_MASK 0x00000070 +#define DTR4_XXXX1_MASK 0x00000700 +#define DTR4_XXXX2_MASK 0x00007000 +#define DTR4_ODTDIS (1 << 15) +#define DTR4_TRGSTRDIS (1 << 16) + +/* DPMC0 register defines */ +#define DPMC0_PCLSTO_MASK 0x00070000 +#define DPMC0_PREAPWDEN (1 << 21) +#define DPMC0_DYNSREN (1 << 23) +#define DPMC0_CLKGTDIS (1 << 24) +#define DPMC0_DISPWRDN (1 << 25) +#define DPMC0_ENPHYCLKGATE (1 << 29) + +/* DRFC register defines */ +#define DRFC_TREFI_MASK 0x00007000 +#define DRFC_REFDBTCLR (1 << 21) + +/* DSCH register defines */ +#define DSCH_OOODIS (1 << 8) +#define DSCH_OOOST3DIS (1 << 9) +#define DSCH_NEWBYPDIS (1 << 12) + +/* DCAL register defines */ +#define DCAL_ZQCINT_MASK 0x00000700 +#define DCAL_SRXZQCL_MASK 0x00003000 + +/* DRMC register defines */ +#define DRMC_CKEMODE (1 << 4) +#define DRMC_ODTMODE (1 << 12) +#define DRMC_COLDWAKE (1 << 16) + +/* PMSTS register defines */ +#define PMSTS_DISR (1 << 0) + +/* DCO register defines */ +#define DCO_DRPLOCK (1 << 0) +#define DCO_CPGCLOCK (1 << 8) +#define DCO_PMICTL (1 << 28) +#define DCO_PMIDIS (1 << 29) +#define DCO_IC (1 << 31) + +/* DECCCTRL register defines */ +#define DECCCTRL_SBEEN (1 << 0) +#define DECCCTRL_DBEEN (1 << 1) +#define DECCCTRL_ENCBGEN (1 << 17) + /* DRAM init command */ #define DCMD_MRS1(rnk, dat) (0 | ((rnk) << 22) | (1 << 3) | ((dat) << 6)) #define DCMD_REF(rnk) (1 | ((rnk) << 22)) #define DCMD_PRE(rnk) (2 | ((rnk) << 22)) -#define DCMD_PREA(rnk) (2 | ((rnk) << 22) | (BIT10 << 6)) +#define DCMD_PREA(rnk) (2 | ((rnk) << 22) | (0x400 << 6)) #define DCMD_ACT(rnk, row) (3 | ((rnk) << 22) | ((row) << 6)) #define DCMD_WR(rnk, col) (4 | ((rnk) << 22) | ((col) << 6)) #define DCMD_RD(rnk, col) (5 | ((rnk) << 22) | ((col) << 6)) #define DCMD_ZQCS(rnk) (6 | ((rnk) << 22)) -#define DCMD_ZQCL(rnk) (6 | ((rnk) << 22) | (BIT10 << 6)) +#define DCMD_ZQCL(rnk) (6 | ((rnk) << 22) | (0x400 << 6)) #define DCMD_NOP(rnk) (7 | ((rnk) << 22)) -#define DDR3_EMRS1_DIC_40 (0) -#define DDR3_EMRS1_DIC_34 (1) +#define DDR3_EMRS1_DIC_40 0 +#define DDR3_EMRS1_DIC_34 1 -#define DDR3_EMRS1_RTTNOM_0 (0) -#define DDR3_EMRS1_RTTNOM_60 (0x04) -#define DDR3_EMRS1_RTTNOM_120 (0x40) -#define DDR3_EMRS1_RTTNOM_40 (0x44) -#define DDR3_EMRS1_RTTNOM_20 (0x200) -#define DDR3_EMRS1_RTTNOM_30 (0x204) +#define DDR3_EMRS1_RTTNOM_0 0 +#define DDR3_EMRS1_RTTNOM_60 0x04 +#define DDR3_EMRS1_RTTNOM_120 0x40 +#define DDR3_EMRS1_RTTNOM_40 0x44 +#define DDR3_EMRS1_RTTNOM_20 0x200 +#define DDR3_EMRS1_RTTNOM_30 0x204 #define DDR3_EMRS2_RTTWR_60 (1 << 9) #define DDR3_EMRS2_RTTWR_120 (1 << 10) @@ -80,87 +167,87 @@ #define DQOBSCKEBBCTL 0x0000 #define DQDLLTXCTL 0x0004 #define DQDLLRXCTL 0x0008 -#define DQMDLLCTL 0x000C +#define DQMDLLCTL 0x000c #define B0RXIOBUFCTL 0x0010 #define B0VREFCTL 0x0014 #define B0RXOFFSET1 0x0018 -#define B0RXOFFSET0 0x001C +#define B0RXOFFSET0 0x001c #define B1RXIOBUFCTL 0x0020 #define B1VREFCTL 0x0024 #define B1RXOFFSET1 0x0028 -#define B1RXOFFSET0 0x002C +#define B1RXOFFSET0 0x002c #define DQDFTCTL 0x0030 #define DQTRAINSTS 0x0034 #define B1DLLPICODER0 0x0038 -#define B0DLLPICODER0 0x003C +#define B0DLLPICODER0 0x003c #define B1DLLPICODER1 0x0040 #define B0DLLPICODER1 0x0044 #define B1DLLPICODER2 0x0048 -#define B0DLLPICODER2 0x004C +#define B0DLLPICODER2 0x004c #define B1DLLPICODER3 0x0050 #define B0DLLPICODER3 0x0054 #define B1RXDQSPICODE 0x0058 -#define B0RXDQSPICODE 0x005C +#define B0RXDQSPICODE 0x005c #define B1RXDQPICODER32 0x0060 #define B1RXDQPICODER10 0x0064 #define B0RXDQPICODER32 0x0068 -#define B0RXDQPICODER10 0x006C +#define B0RXDQPICODER10 0x006c #define B01PTRCTL0 0x0070 #define B01PTRCTL1 0x0074 #define B01DBCTL0 0x0078 -#define B01DBCTL1 0x007C +#define B01DBCTL1 0x007c #define B0LATCTL0 0x0080 #define B1LATCTL0 0x0084 #define B01LATCTL1 0x0088 -#define B0ONDURCTL 0x008C +#define B0ONDURCTL 0x008c #define B1ONDURCTL 0x0090 #define B0OVRCTL 0x0094 #define B1OVRCTL 0x0098 -#define DQCTL 0x009C -#define B0RK2RKCHGPTRCTRL 0x00A0 -#define B1RK2RKCHGPTRCTRL 0x00A4 -#define DQRK2RKCTL 0x00A8 -#define DQRK2RKPTRCTL 0x00AC -#define B0RK2RKLAT 0x00B0 -#define B1RK2RKLAT 0x00B4 -#define DQCLKALIGNREG0 0x00B8 -#define DQCLKALIGNREG1 0x00BC -#define DQCLKALIGNREG2 0x00C0 -#define DQCLKALIGNSTS0 0x00C4 -#define DQCLKALIGNSTS1 0x00C8 -#define DQCLKGATE 0x00CC -#define B0COMPSLV1 0x00D0 -#define B1COMPSLV1 0x00D4 -#define B0COMPSLV2 0x00D8 -#define B1COMPSLV2 0x00DC -#define B0COMPSLV3 0x00E0 -#define B1COMPSLV3 0x00E4 -#define DQVISALANECR0TOP 0x00E8 -#define DQVISALANECR1TOP 0x00EC -#define DQVISACONTROLCRTOP 0x00F0 -#define DQVISALANECR0BL 0x00F4 -#define DQVISALANECR1BL 0x00F8 -#define DQVISACONTROLCRBL 0x00FC -#define DQTIMINGCTRL 0x010C +#define DQCTL 0x009c +#define B0RK2RKCHGPTRCTRL 0x00a0 +#define B1RK2RKCHGPTRCTRL 0x00a4 +#define DQRK2RKCTL 0x00a8 +#define DQRK2RKPTRCTL 0x00ac +#define B0RK2RKLAT 0x00b0 +#define B1RK2RKLAT 0x00b4 +#define DQCLKALIGNREG0 0x00b8 +#define DQCLKALIGNREG1 0x00bc +#define DQCLKALIGNREG2 0x00c0 +#define DQCLKALIGNSTS0 0x00c4 +#define DQCLKALIGNSTS1 0x00c8 +#define DQCLKGATE 0x00cc +#define B0COMPSLV1 0x00d0 +#define B1COMPSLV1 0x00d4 +#define B0COMPSLV2 0x00d8 +#define B1COMPSLV2 0x00dc +#define B0COMPSLV3 0x00e0 +#define B1COMPSLV3 0x00e4 +#define DQVISALANECR0TOP 0x00e8 +#define DQVISALANECR1TOP 0x00ec +#define DQVISACONTROLCRTOP 0x00f0 +#define DQVISALANECR0BL 0x00f4 +#define DQVISALANECR1BL 0x00f8 +#define DQVISACONTROLCRBL 0x00fc +#define DQTIMINGCTRL 0x010c /* CH0-ECC */ #define ECCDLLTXCTL 0x2004 #define ECCDLLRXCTL 0x2008 -#define ECCMDLLCTL 0x200C +#define ECCMDLLCTL 0x200c #define ECCB1DLLPICODER0 0x2038 #define ECCB1DLLPICODER1 0x2040 #define ECCB1DLLPICODER2 0x2048 #define ECCB1DLLPICODER3 0x2050 #define ECCB01DBCTL0 0x2078 -#define ECCB01DBCTL1 0x207C -#define ECCCLKALIGNREG0 0x20B8 -#define ECCCLKALIGNREG1 0x20BC -#define ECCCLKALIGNREG2 0x20C0 +#define ECCB01DBCTL1 0x207c +#define ECCCLKALIGNREG0 0x20b8 +#define ECCCLKALIGNREG1 0x20bc +#define ECCCLKALIGNREG2 0x20c0 /* CH0-CMD */ #define CMDOBSCKEBBCTL 0x4800 #define CMDDLLTXCTL 0x4808 -#define CMDDLLRXCTL 0x480C +#define CMDDLLRXCTL 0x480c #define CMDMDLLCTL 0x4810 #define CMDRCOMPODT 0x4814 #define CMDDLLPICODER0 0x4820 @@ -170,30 +257,30 @@ #define CMDCLKALIGNREG0 0x4850 #define CMDCLKALIGNREG1 0x4854 #define CMDCLKALIGNREG2 0x4858 -#define CMDPMCONFIG0 0x485C +#define CMDPMCONFIG0 0x485c #define CMDPMDLYREG0 0x4860 #define CMDPMDLYREG1 0x4864 #define CMDPMDLYREG2 0x4868 -#define CMDPMDLYREG3 0x486C +#define CMDPMDLYREG3 0x486c #define CMDPMDLYREG4 0x4870 #define CMDCLKALIGNSTS0 0x4874 #define CMDCLKALIGNSTS1 0x4878 -#define CMDPMSTS0 0x487C +#define CMDPMSTS0 0x487c #define CMDPMSTS1 0x4880 #define CMDCOMPSLV 0x4884 -#define CMDBONUS0 0x488C +#define CMDBONUS0 0x488c #define CMDBONUS1 0x4890 #define CMDVISALANECR0 0x4894 #define CMDVISALANECR1 0x4898 -#define CMDVISACONTROLCR 0x489C -#define CMDCLKGATE 0x48A0 -#define CMDTIMINGCTRL 0x48A4 +#define CMDVISACONTROLCR 0x489c +#define CMDCLKGATE 0x48a0 +#define CMDTIMINGCTRL 0x48a4 /* CH0-CLK-CTL */ #define CCOBSCKEBBCTL 0x5800 #define CCRCOMPIO 0x5804 #define CCDLLTXCTL 0x5808 -#define CCDLLRXCTL 0x580C +#define CCDLLRXCTL 0x580c #define CCMDLLCTL 0x5810 #define CCRCOMPODT 0x5814 #define CCDLLPICODER0 0x5820 @@ -205,123 +292,123 @@ #define CCCLKALIGNREG0 0x5850 #define CCCLKALIGNREG1 0x5854 #define CCCLKALIGNREG2 0x5858 -#define CCPMCONFIG0 0x585C +#define CCPMCONFIG0 0x585c #define CCPMDLYREG0 0x5860 #define CCPMDLYREG1 0x5864 #define CCPMDLYREG2 0x5868 -#define CCPMDLYREG3 0x586C +#define CCPMDLYREG3 0x586c #define CCPMDLYREG4 0x5870 #define CCCLKALIGNSTS0 0x5874 #define CCCLKALIGNSTS1 0x5878 -#define CCPMSTS0 0x587C +#define CCPMSTS0 0x587c #define CCPMSTS1 0x5880 #define CCCOMPSLV1 0x5884 #define CCCOMPSLV2 0x5888 -#define CCCOMPSLV3 0x588C +#define CCCOMPSLV3 0x588c #define CCBONUS0 0x5894 #define CCBONUS1 0x5898 -#define CCVISALANECR0 0x589C -#define CCVISALANECR1 0x58A0 -#define CCVISACONTROLCR 0x58A4 -#define CCCLKGATE 0x58A8 -#define CCTIMINGCTL 0x58AC +#define CCVISALANECR0 0x589c +#define CCVISALANECR1 0x58a0 +#define CCVISACONTROLCR 0x58a4 +#define CCCLKGATE 0x58a8 +#define CCTIMINGCTL 0x58ac /* COMP */ #define CMPCTRL 0x6800 #define SOFTRSTCNTL 0x6804 #define MSCNTR 0x6808 -#define NMSCNTRL 0x680C +#define NMSCNTRL 0x680c #define LATCH1CTL 0x6814 -#define COMPVISALANECR0 0x681C +#define COMPVISALANECR0 0x681c #define COMPVISALANECR1 0x6820 #define COMPVISACONTROLCR 0x6824 #define COMPBONUS0 0x6830 -#define TCOCNTCTRL 0x683C +#define TCOCNTCTRL 0x683c #define DQANAODTPUCTL 0x6840 #define DQANAODTPDCTL 0x6844 #define DQANADRVPUCTL 0x6848 -#define DQANADRVPDCTL 0x684C +#define DQANADRVPDCTL 0x684c #define DQANADLYPUCTL 0x6850 #define DQANADLYPDCTL 0x6854 #define DQANATCOPUCTL 0x6858 -#define DQANATCOPDCTL 0x685C +#define DQANATCOPDCTL 0x685c #define CMDANADRVPUCTL 0x6868 -#define CMDANADRVPDCTL 0x686C +#define CMDANADRVPDCTL 0x686c #define CMDANADLYPUCTL 0x6870 #define CMDANADLYPDCTL 0x6874 #define CLKANAODTPUCTL 0x6880 #define CLKANAODTPDCTL 0x6884 #define CLKANADRVPUCTL 0x6888 -#define CLKANADRVPDCTL 0x688C +#define CLKANADRVPDCTL 0x688c #define CLKANADLYPUCTL 0x6890 #define CLKANADLYPDCTL 0x6894 #define CLKANATCOPUCTL 0x6898 -#define CLKANATCOPDCTL 0x689C -#define DQSANAODTPUCTL 0x68A0 -#define DQSANAODTPDCTL 0x68A4 -#define DQSANADRVPUCTL 0x68A8 -#define DQSANADRVPDCTL 0x68AC -#define DQSANADLYPUCTL 0x68B0 -#define DQSANADLYPDCTL 0x68B4 -#define DQSANATCOPUCTL 0x68B8 -#define DQSANATCOPDCTL 0x68BC -#define CTLANADRVPUCTL 0x68C8 -#define CTLANADRVPDCTL 0x68CC -#define CTLANADLYPUCTL 0x68D0 -#define CTLANADLYPDCTL 0x68D4 -#define CHNLBUFSTATIC 0x68F0 -#define COMPOBSCNTRL 0x68F4 -#define COMPBUFFDBG0 0x68F8 -#define COMPBUFFDBG1 0x68FC +#define CLKANATCOPDCTL 0x689c +#define DQSANAODTPUCTL 0x68a0 +#define DQSANAODTPDCTL 0x68a4 +#define DQSANADRVPUCTL 0x68a8 +#define DQSANADRVPDCTL 0x68ac +#define DQSANADLYPUCTL 0x68b0 +#define DQSANADLYPDCTL 0x68b4 +#define DQSANATCOPUCTL 0x68b8 +#define DQSANATCOPDCTL 0x68bc +#define CTLANADRVPUCTL 0x68c8 +#define CTLANADRVPDCTL 0x68cc +#define CTLANADLYPUCTL 0x68d0 +#define CTLANADLYPDCTL 0x68d4 +#define CHNLBUFSTATIC 0x68f0 +#define COMPOBSCNTRL 0x68f4 +#define COMPBUFFDBG0 0x68f8 +#define COMPBUFFDBG1 0x68fc #define CFGMISCCH0 0x6900 #define COMPEN0CH0 0x6904 #define COMPEN1CH0 0x6908 -#define COMPEN2CH0 0x690C +#define COMPEN2CH0 0x690c #define STATLEGEN0CH0 0x6910 #define STATLEGEN1CH0 0x6914 #define DQVREFCH0 0x6918 -#define CMDVREFCH0 0x691C +#define CMDVREFCH0 0x691c #define CLKVREFCH0 0x6920 #define DQSVREFCH0 0x6924 #define CTLVREFCH0 0x6928 -#define TCOVREFCH0 0x692C +#define TCOVREFCH0 0x692c #define DLYSELCH0 0x6930 #define TCODRAMBUFODTCH0 0x6934 #define CCBUFODTCH0 0x6938 -#define RXOFFSETCH0 0x693C +#define RXOFFSETCH0 0x693c #define DQODTPUCTLCH0 0x6940 #define DQODTPDCTLCH0 0x6944 #define DQDRVPUCTLCH0 0x6948 -#define DQDRVPDCTLCH0 0x694C +#define DQDRVPDCTLCH0 0x694c #define DQDLYPUCTLCH0 0x6950 #define DQDLYPDCTLCH0 0x6954 #define DQTCOPUCTLCH0 0x6958 -#define DQTCOPDCTLCH0 0x695C +#define DQTCOPDCTLCH0 0x695c #define CMDDRVPUCTLCH0 0x6968 -#define CMDDRVPDCTLCH0 0x696C +#define CMDDRVPDCTLCH0 0x696c #define CMDDLYPUCTLCH0 0x6970 #define CMDDLYPDCTLCH0 0x6974 #define CLKODTPUCTLCH0 0x6980 #define CLKODTPDCTLCH0 0x6984 #define CLKDRVPUCTLCH0 0x6988 -#define CLKDRVPDCTLCH0 0x698C +#define CLKDRVPDCTLCH0 0x698c #define CLKDLYPUCTLCH0 0x6990 #define CLKDLYPDCTLCH0 0x6994 #define CLKTCOPUCTLCH0 0x6998 -#define CLKTCOPDCTLCH0 0x699C -#define DQSODTPUCTLCH0 0x69A0 -#define DQSODTPDCTLCH0 0x69A4 -#define DQSDRVPUCTLCH0 0x69A8 -#define DQSDRVPDCTLCH0 0x69AC -#define DQSDLYPUCTLCH0 0x69B0 -#define DQSDLYPDCTLCH0 0x69B4 -#define DQSTCOPUCTLCH0 0x69B8 -#define DQSTCOPDCTLCH0 0x69BC -#define CTLDRVPUCTLCH0 0x69C8 -#define CTLDRVPDCTLCH0 0x69CC -#define CTLDLYPUCTLCH0 0x69D0 -#define CTLDLYPDCTLCH0 0x69D4 -#define FNLUPDTCTLCH0 0x69F0 +#define CLKTCOPDCTLCH0 0x699c +#define DQSODTPUCTLCH0 0x69a0 +#define DQSODTPDCTLCH0 0x69a4 +#define DQSDRVPUCTLCH0 0x69a8 +#define DQSDRVPDCTLCH0 0x69ac +#define DQSDLYPUCTLCH0 0x69b0 +#define DQSDLYPDCTLCH0 0x69b4 +#define DQSTCOPUCTLCH0 0x69b8 +#define DQSTCOPDCTLCH0 0x69bc +#define CTLDRVPUCTLCH0 0x69c8 +#define CTLDRVPDCTLCH0 0x69cc +#define CTLDLYPUCTLCH0 0x69d0 +#define CTLDLYPDCTLCH0 0x69d4 +#define FNLUPDTCTLCH0 0x69f0 /* PLL */ #define MPLLCTRL0 0x7800 @@ -332,17 +419,17 @@ #define MPLLDFT 0x7828 #define MPLLMON0CTL 0x7830 #define MPLLMON1CTL 0x7838 -#define MPLLMON2CTL 0x783C +#define MPLLMON2CTL 0x783c #define SFRTRIM 0x7850 #define MPLLDFTOUT0 0x7858 -#define MPLLDFTOUT1 0x785C +#define MPLLDFTOUT1 0x785c #define MASTERRSTN 0x7880 #define PLLLOCKDEL 0x7884 #define SFRDEL 0x7888 -#define CRUVISALANECR0 0x78F0 -#define CRUVISALANECR1 0x78F4 -#define CRUVISACONTROLCR 0x78F8 -#define IOSFVISALANECR0 0x78FC +#define CRUVISALANECR0 0x78f0 +#define CRUVISALANECR1 0x78f4 +#define CRUVISACONTROLCR 0x78f8 +#define IOSFVISALANECR0 0x78fc #define IOSFVISALANECR1 0x7900 #define IOSFVISACONTROLCR 0x7904 @@ -350,7 +437,7 @@ /* DRAM Specific Message Bus OpCodes */ #define MSG_OP_DRAM_INIT 0x68 -#define MSG_OP_DRAM_WAKE 0xCA +#define MSG_OP_DRAM_WAKE 0xca #define SAMPLE_SIZE 6 @@ -377,9 +464,9 @@ /* offset into "vref_codes[]" for minimum allowed VREF setting */ #define VREF_MIN 0x00 /* offset into "vref_codes[]" for maximum allowed VREF setting */ -#define VREF_MAX 0x3F +#define VREF_MAX 0x3f #define RDQS_MIN 0x00 /* minimum RDQS delay value */ -#define RDQS_MAX 0x3F /* maximum RDQS delay value */ +#define RDQS_MAX 0x3f /* maximum RDQS delay value */ /* how many WDQ codes to jump while margining */ #define WDQ_STEP 1 diff --git a/arch/x86/include/asm/config.h b/arch/x86/include/asm/config.h index ff15828..3a891ba 100644 --- a/arch/x86/include/asm/config.h +++ b/arch/x86/include/asm/config.h @@ -7,7 +7,6 @@ #ifndef _ASM_CONFIG_H_ #define _ASM_CONFIG_H_ -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_LMB #define CONFIG_SYS_BOOT_RAMDISK_HIGH diff --git a/board/BuR/common/bur_common.h b/board/BuR/common/bur_common.h index 39afbba..e4896fb 100644 --- a/board/BuR/common/bur_common.h +++ b/board/BuR/common/bur_common.h @@ -16,10 +16,9 @@ int load_lcdtiming(struct am335x_lcdpanel *panel); void br_summaryscreen(void); -void blink(u32 blinks, u32 intervall, u32 pin); void pmicsetup(u32 mpupll); void enable_uart0_pin_mux(void); -void enable_i2c0_pin_mux(void); +void enable_i2c_pin_mux(void); void enable_board_pin_mux(void); int board_eth_init(bd_t *bis); diff --git a/board/BuR/common/common.c b/board/BuR/common/common.c index 5ff8a7e..ccaa9c6 100644 --- a/board/BuR/common/common.c +++ b/board/BuR/common/common.c @@ -441,30 +441,12 @@ void lcd_enable(void) #error "LCD-support with a suitable FB-Driver is mandatory !" #endif /* CONFIG_LCD */ -void blink(u32 blinks, u32 intervall, u32 pin) -{ - gpio_direction_output(pin, 0); - int val = 0; - - do { - val ^= 0x01; - gpio_set_value(pin, val); - mdelay(intervall); - } while (blinks--); - - gpio_set_value(pin, 0); -} - #ifdef CONFIG_SPL_BUILD void pmicsetup(u32 mpupll) { int mpu_vdd; int usb_cur_lim; - /* setup I2C */ - enable_i2c0_pin_mux(); - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); - if (i2c_probe(TPS65217_CHIP_PM)) { puts("PMIC (0x24) not found! skip further initalization.\n"); return; diff --git a/board/BuR/kwb/board.c b/board/BuR/kwb/board.c index 892311e..6eed7e0 100644 --- a/board/BuR/kwb/board.c +++ b/board/BuR/kwb/board.c @@ -124,7 +124,8 @@ void am33xx_spl_board_init(void) gpio_direction_output(LCD_PWR, 0); /* setup I2C */ - enable_i2c0_pin_mux(); + enable_i2c_pin_mux(); + i2c_set_bus_num(0); i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); /* power-ON 3V3 via Resetcontroller */ diff --git a/board/BuR/kwb/mux.c b/board/BuR/kwb/mux.c index 9f89b5e..2b1d8d3 100644 --- a/board/BuR/kwb/mux.c +++ b/board/BuR/kwb/mux.c @@ -180,7 +180,7 @@ void enable_uart0_pin_mux(void) configure_module_pin_mux(uart0_pin_mux); } -void enable_i2c0_pin_mux(void) +void enable_i2c_pin_mux(void) { configure_module_pin_mux(i2c0_pin_mux); } diff --git a/board/BuR/tseries/board.c b/board/BuR/tseries/board.c index 9402aa4..89e989f 100644 --- a/board/BuR/tseries/board.c +++ b/board/BuR/tseries/board.c @@ -123,6 +123,10 @@ void am33xx_spl_board_init(void) /* setup LCD-Pixel Clock */ writel(0x2, &cmdpll->clklcdcpixelclk); /* clock comes from perPLL M2 */ + /* setup I2C */ + enable_i2c_pin_mux(); + i2c_set_bus_num(0); + i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); pmicsetup(0); } diff --git a/board/BuR/tseries/mux.c b/board/BuR/tseries/mux.c index 2c87a63..ac7e885 100644 --- a/board/BuR/tseries/mux.c +++ b/board/BuR/tseries/mux.c @@ -226,7 +226,7 @@ void enable_uart0_pin_mux(void) configure_module_pin_mux(uart0_pin_mux); } -void enable_i2c0_pin_mux(void) +void enable_i2c_pin_mux(void) { configure_module_pin_mux(i2c0_pin_mux); } diff --git a/board/amcc/acadia/Kconfig b/board/amcc/acadia/Kconfig index 033deaf..7c0ef53 100644 --- a/board/amcc/acadia/Kconfig +++ b/board/amcc/acadia/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "acadia" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/bamboo/Kconfig b/board/amcc/bamboo/Kconfig index c0bd40a..d44a36a 100644 --- a/board/amcc/bamboo/Kconfig +++ b/board/amcc/bamboo/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "bamboo" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/bubinga/Kconfig b/board/amcc/bubinga/Kconfig index 540d9b6..fc40f6e 100644 --- a/board/amcc/bubinga/Kconfig +++ b/board/amcc/bubinga/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "bubinga" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/canyonlands/Kconfig b/board/amcc/canyonlands/Kconfig index 848e08f..46efa7a 100644 --- a/board/amcc/canyonlands/Kconfig +++ b/board/amcc/canyonlands/Kconfig @@ -39,12 +39,4 @@ config DM config DM_SERIAL default y -config SYS_MALLOC_F - bool - default y - -config SYS_MALLOC_F_LEN - hex - default 0x400 - endif diff --git a/board/amcc/ebony/Kconfig b/board/amcc/ebony/Kconfig index 62394b6..ba73148 100644 --- a/board/amcc/ebony/Kconfig +++ b/board/amcc/ebony/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "ebony" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/katmai/Kconfig b/board/amcc/katmai/Kconfig index fc606cf..59d3ef5 100644 --- a/board/amcc/katmai/Kconfig +++ b/board/amcc/katmai/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "katmai" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/kilauea/Kconfig b/board/amcc/kilauea/Kconfig index 3f2f434..5dfd9eb 100644 --- a/board/amcc/kilauea/Kconfig +++ b/board/amcc/kilauea/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "kilauea" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/luan/Kconfig b/board/amcc/luan/Kconfig index 3df90af..36b44ff 100644 --- a/board/amcc/luan/Kconfig +++ b/board/amcc/luan/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "luan" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/makalu/Kconfig b/board/amcc/makalu/Kconfig index 31ce5f1..7f8498a 100644 --- a/board/amcc/makalu/Kconfig +++ b/board/amcc/makalu/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "makalu" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/ocotea/Kconfig b/board/amcc/ocotea/Kconfig index 18c1a15..489e8a4 100644 --- a/board/amcc/ocotea/Kconfig +++ b/board/amcc/ocotea/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "ocotea" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/redwood/Kconfig b/board/amcc/redwood/Kconfig index d710590..fee6441 100644 --- a/board/amcc/redwood/Kconfig +++ b/board/amcc/redwood/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "redwood" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/sequoia/Kconfig b/board/amcc/sequoia/Kconfig index 67ee3ca..6e6e408 100644 --- a/board/amcc/sequoia/Kconfig +++ b/board/amcc/sequoia/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "sequoia" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/taihu/Kconfig b/board/amcc/taihu/Kconfig index fc5cb1d..faafb08 100644 --- a/board/amcc/taihu/Kconfig +++ b/board/amcc/taihu/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "taihu" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/taishan/Kconfig b/board/amcc/taishan/Kconfig index abd07f5..9ad8a4c 100644 --- a/board/amcc/taishan/Kconfig +++ b/board/amcc/taishan/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "taishan" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/walnut/Kconfig b/board/amcc/walnut/Kconfig index 94e3dc9..d4c451d 100644 --- a/board/amcc/walnut/Kconfig +++ b/board/amcc/walnut/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "walnut" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/yosemite/Kconfig b/board/amcc/yosemite/Kconfig index dfa1068..ec51236 100644 --- a/board/amcc/yosemite/Kconfig +++ b/board/amcc/yosemite/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "yosemite" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/amcc/yucca/Kconfig b/board/amcc/yucca/Kconfig index 61d9589..338b6a9 100644 --- a/board/amcc/yucca/Kconfig +++ b/board/amcc/yucca/Kconfig @@ -9,4 +9,8 @@ config SYS_VENDOR config SYS_CONFIG_NAME default "yucca" +config DISPLAY_BOARDINFO + bool + default y + endif diff --git a/board/armltd/vexpress64/Kconfig b/board/armltd/vexpress64/Kconfig index 7d5e7be..f5693ae 100644 --- a/board/armltd/vexpress64/Kconfig +++ b/board/armltd/vexpress64/Kconfig @@ -1,16 +1,3 @@ -if TARGET_VEXPRESS64_AEMV8A - -config SYS_BOARD - default "vexpress64" - -config SYS_VENDOR - default "armltd" - -config SYS_CONFIG_NAME - default "vexpress_aemv8a" - -endif - if TARGET_VEXPRESS64_BASE_FVP config SYS_BOARD diff --git a/board/armltd/vexpress64/vexpress64.c b/board/armltd/vexpress64/vexpress64.c index 071d88c..13dd667 100644 --- a/board/armltd/vexpress64/vexpress64.c +++ b/board/armltd/vexpress64/vexpress64.c @@ -11,7 +11,6 @@ #include <netdev.h> #include <asm/io.h> #include <linux/compiler.h> -#include <asm/semihosting.h> #include <dm/platdata.h> #include <dm/platform_data/serial_pl01x.h> @@ -46,101 +45,6 @@ void reset_cpu(ulong addr) { } -#ifdef CONFIG_BOARD_LATE_INIT -int board_late_init(void) -{ -#ifdef CONFIG_SEMIHOSTING - /* - * Please refer to doc/README.semihosting for a more complete - * description. - * - * We require that the board include file defines these env variables: - * - kernel_name - * - kernel_addr_r - * - initrd_name - * - initrd_addr_r - * - fdt_name - * - fdt_addr_r - * - * For the "fdt chosen" startup macro, this code will then define: - * - initrd_end (based on initrd_addr_r plus actual initrd_size) - * - * We will then load the kernel, initrd, and fdt into the specified - * locations in memory in a similar way that the ATF fastmodel code - * uses semihosting calls to load other boot stages and u-boot itself. - */ - - /* Env variable strings */ - char *kernel_name = getenv("kernel_name"); - char *kernel_addr_str = getenv("kernel_addr_r"); - char *initrd_name = getenv("initrd_name"); - char *initrd_addr_str = getenv("initrd_addr_r"); - char *fdt_name = getenv("fdt_name"); - char *fdt_addr_str = getenv("fdt_addr_r"); - char initrd_end_str[64]; - - /* Actual addresses converted from env variables */ - void *kernel_addr_r; - void *initrd_addr_r; - void *fdt_addr_r; - - /* Actual initrd base and size */ - unsigned long initrd_base; - unsigned long initrd_size; - - /* Space available */ - int avail; - - /* Make sure the environment variables needed are set */ - if (!(kernel_addr_str && initrd_addr_str && fdt_addr_str)) { - printf("%s: Define {kernel/initrd/fdt}_addr_r\n", __func__); - return -1; - } - if (!(kernel_name && initrd_name && fdt_name)) { - printf("%s: Define {kernel/initrd/fdt}_name\n", __func__); - return -1; - } - - /* Get exact initrd_size */ - initrd_size = smh_len(initrd_name); - if (initrd_size == -1) { - printf("%s: Can't get file size for \'%s\'\n", __func__, - initrd_name); - return -1; - } - - /* Set initrd_end */ - initrd_base = simple_strtoul(initrd_addr_str, NULL, 16); - initrd_addr_r = (void *)initrd_base; - sprintf(initrd_end_str, "0x%lx", initrd_base + initrd_size - 1); - setenv("initrd_end", initrd_end_str); - - /* Load kernel to memory */ - fdt_addr_r = (void *)simple_strtoul(fdt_addr_str, NULL, 16); - kernel_addr_r = (void *)simple_strtoul(kernel_addr_str, NULL, 16); - - /* - * The kernel must be lower in memory than fdt and loading the - * kernel must not trample the fdt or vice versa. - */ - avail = fdt_addr_r - kernel_addr_r; - if (avail < 0) { - printf("%s: fdt must be after kernel\n", __func__); - return -1; - } - smh_load(kernel_name, kernel_addr_r, avail, 1); - - /* Load fdt to memory */ - smh_load(fdt_name, fdt_addr_r, 0x20000, 1); - - /* Load initrd to memory */ - smh_load(initrd_name, initrd_addr_r, initrd_size, 1); - -#endif /* CONFIG_SEMIHOSTING */ - return 0; -} -#endif /* CONFIG_BOARD_LATE_INIT */ - /* * Board specific ethernet initialization routine. */ diff --git a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c index b807ef9..4289179 100644 --- a/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c +++ b/board/atmel/at91sam9m10g45ek/at91sam9m10g45ek.c @@ -8,6 +8,7 @@ #include <common.h> #include <asm/io.h> +#include <asm/arch/clk.h> #include <asm/arch/at91sam9g45_matrix.h> #include <asm/arch/at91sam9_smc.h> #include <asm/arch/at91_common.h> @@ -15,6 +16,7 @@ #include <asm/arch/gpio.h> #include <asm/arch/clk.h> #include <lcd.h> +#include <linux/mtd/nand.h> #include <atmel_lcdc.h> #include <atmel_mci.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) @@ -71,6 +73,84 @@ void at91sam9m10g45ek_nand_hw_init(void) } #endif +#if defined(CONFIG_SPL_BUILD) +#include <spl.h> +#include <nand.h> + +void at91_spl_board_init(void) +{ + /* + * On the at91sam9m10g45ek board, the chip wm9711 stays in the + * test mode, so it needs do some action to exit test mode. + */ + at91_periph_clk_enable(ATMEL_ID_PIODE); + at91_set_gpio_output(AT91_PIN_PD7, 0); + at91_set_gpio_output(AT91_PIN_PD8, 0); + at91_set_pio_pullup(AT91_PIO_PORTD, 7, 1); + at91_set_pio_pullup(AT91_PIO_PORTD, 8, 1); + +#ifdef CONFIG_SYS_USE_MMC + at91_mci_hw_init(); +#elif CONFIG_SYS_USE_NANDFLASH + at91sam9m10g45ek_nand_hw_init(); +#endif +} + +#include <asm/arch/atmel_mpddrc.h> +static void ddr2_conf(struct atmel_mpddr *ddr2) +{ + ddr2->md = (ATMEL_MPDDRC_MD_DBW_16_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM); + + ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | + ATMEL_MPDDRC_CR_NR_ROW_14 | + ATMEL_MPDDRC_CR_DQMS_SHARED | + ATMEL_MPDDRC_CR_CAS_DDR_CAS3); + + ddr2->rtr = 0x24b; + + ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET |/* 6*7.5 = 45 ns */ + 2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET |/* 2*7.5 = 15 ns */ + 2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | /* 2*7.5 = 15 ns */ + 8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | /* 8*7.5 = 60 ns */ + 2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | /* 2*7.5 = 15 ns */ + 1 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | /* 1*7.5= 7.5 ns*/ + 1 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | /* 1 clk cycle */ + 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); /* 2 clk cycles */ + + ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET | /* 2*7.5 = 15 ns */ + 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET | + 16 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET | + 14 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET); + + ddr2->tpr2 = (1 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET | + 0 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET | + 7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); +} + +void mem_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct at91_matrix *mat = (struct at91_matrix *)ATMEL_BASE_MATRIX; + struct atmel_mpddr ddr2; + unsigned long csa; + + ddr2_conf(&ddr2); + + /* enable DDR2 clock */ + writel(0x4, &pmc->scer); + + /* Chip select 1 is for DDR2/SDRAM */ + csa = readl(&mat->ebicsa); + csa |= AT91_MATRIX_EBI_CS1A_SDRAMC; + csa &= ~AT91_MATRIX_EBI_VDDIOMSEL_3_3V; + writel(csa, &mat->ebicsa); + + /* DDRAM2 Controller initialize */ + ddr2_init(ATMEL_BASE_CS6, &ddr2); +} +#endif + #ifdef CONFIG_CMD_USB static void at91sam9m10g45ek_usb_hw_init(void) { diff --git a/board/atmel/at91sam9n12ek/at91sam9n12ek.c b/board/atmel/at91sam9n12ek/at91sam9n12ek.c index 9adc992..4f46a03 100644 --- a/board/atmel/at91sam9n12ek/at91sam9n12ek.c +++ b/board/atmel/at91sam9n12ek/at91sam9n12ek.c @@ -257,3 +257,76 @@ int dram_init(void) CONFIG_SYS_SDRAM_SIZE); return 0; } + +#if defined(CONFIG_SPL_BUILD) +#include <spl.h> +#include <nand.h> + +void at91_spl_board_init(void) +{ +#ifdef CONFIG_SYS_USE_MMC + at91_mci_hw_init(); +#elif CONFIG_SYS_USE_NANDFLASH + at91sam9n12ek_nand_hw_init(); +#elif CONFIG_SYS_USE_SPIFLASH + at91_spi0_hw_init(1 << 4); +#endif +} + +#include <asm/arch/atmel_mpddrc.h> +static void ddr2_conf(struct atmel_mpddr *ddr2) +{ + ddr2->md = (ATMEL_MPDDRC_MD_DBW_16_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM); + + ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | + ATMEL_MPDDRC_CR_NR_ROW_13 | + ATMEL_MPDDRC_CR_CAS_DDR_CAS3 | + ATMEL_MPDDRC_CR_NB_8BANKS | + ATMEL_MPDDRC_CR_DECOD_INTERLEAVED); + + ddr2->rtr = 0x411; + + ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | + 8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); + + ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET | + 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET | + 19 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET | + 18 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET); + + ddr2->tpr2 = (2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET | + 3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET | + 7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); +} + +void mem_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; + struct atmel_mpddr ddr2; + unsigned long csa; + + ddr2_conf(&ddr2); + + /* enable DDR2 clock */ + writel(0x4, &pmc->scer); + + /* Chip select 1 is for DDR2/SDRAM */ + csa = readl(&matrix->ebicsa); + csa |= AT91_MATRIX_EBI_CS1A_SDRAMC; + csa &= ~AT91_MATRIX_EBI_DBPU_OFF; + csa |= AT91_MATRIX_EBI_DBPD_OFF; + csa |= AT91_MATRIX_EBI_EBI_IOSR_NORMAL; + writel(csa, &matrix->ebicsa); + + /* DDRAM2 Controller initialize */ + ddr2_init(ATMEL_BASE_CS1, &ddr2); +} +#endif diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c index 17a2a40..114ac5c 100644 --- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c @@ -293,3 +293,77 @@ int dram_init(void) CONFIG_SYS_SDRAM_SIZE); return 0; } + +#if defined(CONFIG_SPL_BUILD) +#include <spl.h> +#include <nand.h> + +void at91_spl_board_init(void) +{ +#ifdef CONFIG_SYS_USE_MMC + at91_mci_hw_init(); +#elif CONFIG_SYS_USE_NANDFLASH + at91sam9x5ek_nand_hw_init(); +#elif CONFIG_SYS_USE_SPIFLASH + at91_spi0_hw_init(1 << 4); +#endif +} + +#include <asm/arch/atmel_mpddrc.h> +static void ddr2_conf(struct atmel_mpddr *ddr2) +{ + ddr2->md = (ATMEL_MPDDRC_MD_DBW_16_BITS | ATMEL_MPDDRC_MD_DDR2_SDRAM); + + ddr2->cr = (ATMEL_MPDDRC_CR_NC_COL_10 | + ATMEL_MPDDRC_CR_NR_ROW_13 | + ATMEL_MPDDRC_CR_CAS_DDR_CAS3 | + ATMEL_MPDDRC_CR_NB_8BANKS | + ATMEL_MPDDRC_CR_DECOD_INTERLEAVED); + + ddr2->rtr = 0x411; + + ddr2->tpr0 = (6 << ATMEL_MPDDRC_TPR0_TRAS_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRCD_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TWR_OFFSET | + 8 << ATMEL_MPDDRC_TPR0_TRC_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRP_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TRRD_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TWTR_OFFSET | + 2 << ATMEL_MPDDRC_TPR0_TMRD_OFFSET); + + ddr2->tpr1 = (2 << ATMEL_MPDDRC_TPR1_TXP_OFFSET | + 200 << ATMEL_MPDDRC_TPR1_TXSRD_OFFSET | + 19 << ATMEL_MPDDRC_TPR1_TXSNR_OFFSET | + 18 << ATMEL_MPDDRC_TPR1_TRFC_OFFSET); + + ddr2->tpr2 = (7 << ATMEL_MPDDRC_TPR2_TFAW_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TRTP_OFFSET | + 3 << ATMEL_MPDDRC_TPR2_TRPA_OFFSET | + 7 << ATMEL_MPDDRC_TPR2_TXARDS_OFFSET | + 2 << ATMEL_MPDDRC_TPR2_TXARD_OFFSET); +} + +void mem_init(void) +{ + struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC; + struct at91_matrix *matrix = (struct at91_matrix *)ATMEL_BASE_MATRIX; + struct atmel_mpddr ddr2; + unsigned long csa; + + ddr2_conf(&ddr2); + + /* enable DDR2 clock */ + writel(0x4, &pmc->scer); + + /* Chip select 1 is for DDR2/SDRAM */ + csa = readl(&matrix->ebicsa); + csa |= AT91_MATRIX_EBI_CS1A_SDRAMC; + csa &= ~AT91_MATRIX_EBI_DBPU_OFF; + csa |= AT91_MATRIX_EBI_DBPD_OFF; + csa |= AT91_MATRIX_EBI_EBI_IOSR_NORMAL; + writel(csa, &matrix->ebicsa); + + /* DDRAM2 Controller initialize */ + ddr2_init(ATMEL_BASE_CS1, &ddr2); +} +#endif diff --git a/board/atmel/sama5d4_xplained/sama5d4_xplained.c b/board/atmel/sama5d4_xplained/sama5d4_xplained.c index e7f225a..7d447fe 100644 --- a/board/atmel/sama5d4_xplained/sama5d4_xplained.c +++ b/board/atmel/sama5d4_xplained/sama5d4_xplained.c @@ -24,6 +24,7 @@ #include <netdev.h> #include <nand.h> #include <spi.h> +#include <version.h> DECLARE_GLOBAL_DATA_PTR; @@ -179,6 +180,7 @@ void lcd_show_board_info(void) int i; char temp[32]; + lcd_printf("%s\n", U_BOOT_VERSION); lcd_printf("2014 ATMEL Corp\n"); lcd_printf("%s CPU at %s MHz\n", get_cpu_name(), strmhz(temp, get_cpu_clk_rate())); diff --git a/board/atmel/sama5d4ek/sama5d4ek.c b/board/atmel/sama5d4ek/sama5d4ek.c index 46e5041..e9bbb4b 100644 --- a/board/atmel/sama5d4ek/sama5d4ek.c +++ b/board/atmel/sama5d4ek/sama5d4ek.c @@ -24,6 +24,7 @@ #include <netdev.h> #include <nand.h> #include <spi.h> +#include <version.h> DECLARE_GLOBAL_DATA_PTR; @@ -174,6 +175,7 @@ void lcd_show_board_info(void) int i; char temp[32]; + lcd_printf("%s\n", U_BOOT_VERSION); lcd_printf("2014 ATMEL Corp\n"); lcd_printf("at91@atmel.com\n"); lcd_printf("%s CPU at %s MHz\n", get_cpu_name(), diff --git a/board/freescale/m53017evb/u-boot.lds b/board/freescale/m53017evb/u-boot.lds index de8d09b..b1cae59 100644 --- a/board/freescale/m53017evb/u-boot.lds +++ b/board/freescale/m53017evb/u-boot.lds @@ -13,8 +13,6 @@ SECTIONS .text : { arch/m68k/cpu/mcf532x/start.o (.text*) - arch/m68k/cpu/mcf532x/built-in.o (.text*) - arch/m68k/lib/built-in.o (.text*) . = DEFINED(env_offset) ? env_offset : .; common/env_embedded.o (.text*) diff --git a/board/prodrive/alpr/nand.c b/board/prodrive/alpr/nand.c index 5427de5..ca40cea 100644 --- a/board/prodrive/alpr/nand.c +++ b/board/prodrive/alpr/nand.c @@ -93,19 +93,6 @@ static void alpr_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) } } -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -static int alpr_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - int i; - - for (i = 0; i < len; i++) - if (buf[i] != readb(&(alpr_ndfc->data))) - return i; - - return 0; -} -#endif - static int alpr_nand_dev_ready(struct mtd_info *mtd) { /* @@ -130,9 +117,6 @@ int board_nand_init(struct nand_chip *nand) nand->read_byte = alpr_nand_read_byte; nand->write_buf = alpr_nand_write_buf; nand->read_buf = alpr_nand_read_buf; -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - nand->verify_buf = alpr_nand_verify_buf; -#endif nand->dev_ready = alpr_nand_dev_ready; return 0; diff --git a/board/raspberrypi/rpi/Kconfig b/board/raspberrypi/rpi/Kconfig deleted file mode 100644 index 6a538cf..0000000 --- a/board/raspberrypi/rpi/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_RPI - -config SYS_BOARD - default "rpi" - -config SYS_VENDOR - default "raspberrypi" - -config SYS_SOC - default "bcm2835" - -config SYS_CONFIG_NAME - default "rpi" - -endif diff --git a/board/raspberrypi/rpi_2/Kconfig b/board/raspberrypi/rpi_2/Kconfig deleted file mode 100644 index 032184d..0000000 --- a/board/raspberrypi/rpi_2/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_RPI_2 - -config SYS_BOARD - default "rpi_2" - -config SYS_VENDOR - default "raspberrypi" - -config SYS_SOC - default "bcm2835" - -config SYS_CONFIG_NAME - default "rpi_2" - -endif diff --git a/board/seco/Kconfig b/board/seco/Kconfig new file mode 100644 index 0000000..dcb1ac8 --- /dev/null +++ b/board/seco/Kconfig @@ -0,0 +1,63 @@ +if TARGET_SECOMX6 + +choice + prompt "SECO i.MX6 Board variant" + +config SECOMX6_Q7 + bool "Q7" + +config SECOMX6_UQ7 + bool "uQ7" + +config SECOMX6_USBC + bool "uSBC" + +endchoice + +choice + prompt "SECO i.MX6 SoC variant" + +config SECOMX6Q + bool "i.MX6Q" + select MX6Q + +config SECOMX6DL + bool "i.MX6DL" + select MX6DL + +config SECOMX6S + bool "i.MX6S" + select MX6S + +endchoice + +choice + prompt "DDR size" + +config SECOMX6_512MB + bool "512MB" + +config SECOMX6_1GB + bool "1GB" + +config SECOMX6_2GB + bool "2GB" + +config SECOMX6_4GB + bool "4GB" + +endchoice + +config IMX_CONFIG + default "board/seco/mx6quq7/mx6quq7-2g.cfg" if SECOMX6_UQ7 && SECOMX6Q && SECOMX6_2GB + +config SYS_BOARD + default "mx6quq7" if SECOMX6_UQ7 && SECOMX6Q + +config SYS_VENDOR + default "seco" + +config SYS_CONFIG_NAME + default "secomx6quq7" if SECOMX6_UQ7 && SECOMX6Q + +endif diff --git a/board/seco/common/Makefile b/board/seco/common/Makefile new file mode 100644 index 0000000..9e37ebb --- /dev/null +++ b/board/seco/common/Makefile @@ -0,0 +1,2 @@ + +obj-$(CONFIG_TARGET_SECOMX6) += mx6.o diff --git a/board/seco/common/mx6.c b/board/seco/common/mx6.c new file mode 100644 index 0000000..2f14f59 --- /dev/null +++ b/board/seco/common/mx6.c @@ -0,0 +1,138 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * Copyright (C) 2015 ECA Sinters + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * Modified by: Boris Brezillon <boris.brezillon@free-electrons.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/mx6-pins.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/boot_mode.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/arch/mxc_hdmi.h> +#include <asm/arch/crm_regs.h> +#include <linux/fb.h> +#include <ipu_pixfmt.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <micrel.h> +#include <asm/imx-common/mxc_i2c.h> +#include <i2c.h> + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +static iomux_v3_cfg_t const uart2_pads[] = { + MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +void seco_mx6_setup_uart_iomux(void) +{ + imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads)); +} + +#define ENET_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_MED | \ + PAD_CTL_DSE_40ohm | \ + PAD_CTL_HYS) + +static iomux_v3_cfg_t const enet_pads[] = { + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), +}; + +void seco_mx6_setup_enet_iomux(void) +{ + imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); +} + +int seco_mx6_rgmii_rework(struct phy_device *phydev) +{ + /* control data pad skew - devaddr = 0x02, register = 0x04 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); + /* rx data pad skew - devaddr = 0x02, register = 0x05 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); + /* tx data pad skew - devaddr = 0x02, register = 0x05 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x0000); + + /* gtx and rx clock pad skew - devaddr = 0x02, register = 0x08 */ + ksz9031_phy_extended_write(phydev, 0x02, + MII_KSZ9031_EXT_RGMII_CLOCK_SKEW, + MII_KSZ9031_MOD_DATA_NO_POST_INC, 0x03FF); + return 0; +} + +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | \ + PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | \ + PAD_CTL_HYS) + +static iomux_v3_cfg_t const usdhc3_pads[] = { + MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +static iomux_v3_cfg_t const usdhc4_pads[] = { + MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +void seco_mx6_setup_usdhc_iomux(int id) +{ + switch (id) { + case 3: + imx_iomux_v3_setup_multiple_pads(usdhc3_pads, + ARRAY_SIZE(usdhc3_pads)); + break; + + case 4: + imx_iomux_v3_setup_multiple_pads(usdhc4_pads, + ARRAY_SIZE(usdhc4_pads)); + break; + + default: + printf("Warning: invalid usdhc id (%d)\n", id); + break; + } +} diff --git a/board/seco/common/mx6.h b/board/seco/common/mx6.h new file mode 100644 index 0000000..a05db67 --- /dev/null +++ b/board/seco/common/mx6.h @@ -0,0 +1,9 @@ +#ifndef __SECO_COMMON_MX6_H +#define __SECO_COMMON_MX6_H + +void seco_mx6_setup_uart_iomux(void); +void seco_mx6_setup_enet_iomux(void); +int seco_mx6_rgmii_rework(struct phy_device *phydev); +void seco_mx6_setup_usdhc_iomux(int id); + +#endif /* __SECO_COMMON_MX6_H */ diff --git a/board/seco/mx6quq7/MAINTAINERS b/board/seco/mx6quq7/MAINTAINERS new file mode 100644 index 0000000..60fd4ca --- /dev/null +++ b/board/seco/mx6quq7/MAINTAINERS @@ -0,0 +1,6 @@ +MX6QUQ7 BOARD +M: Boris Brezillon <boris.brezillon@free-electrons.com> +S: Maintained +F: board/seco/mx6quq7/ +F: include/configs/secomx6quq7.h +F: configs/secomx6quq7_defconfig diff --git a/board/seco/mx6quq7/Makefile b/board/seco/mx6quq7/Makefile new file mode 100644 index 0000000..bbf1d68 --- /dev/null +++ b/board/seco/mx6quq7/Makefile @@ -0,0 +1,7 @@ +# +# (C) Copyright 2015 ECA Sinters +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := mx6quq7.o diff --git a/board/seco/mx6quq7/mx6quq7-2g.cfg b/board/seco/mx6quq7/mx6quq7-2g.cfg new file mode 100644 index 0000000..159120e --- /dev/null +++ b/board/seco/mx6quq7/mx6quq7-2g.cfg @@ -0,0 +1,173 @@ +/* + * Copyright (C) 2013 Seco USA Inc + * + * SPDX-License-Identifier: GPL-2.0 + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +#define __ASSEMBLY__ +#include <config.h> +#include "asm/arch/mx6-ddr.h" +#include "asm/arch/iomux.h" +#include "asm/arch/crm_regs.h" + +/* DDR IO TYPE */ +DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000 +DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000 + +/* DATA STROBE */ +DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000 +DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000028 + +/* DATA */ +DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000 +DATA 4, MX6_IOM_GRP_B0DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B1DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B2DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B3DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B4DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B5DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B6DS, 0x00000028 +DATA 4, MX6_IOM_GRP_B7DS, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM0, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM1, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM2, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM3, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM4, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM5, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM6, 0x00000028 +DATA 4, MX6_IOM_DRAM_DQM7, 0x00000028 +/* ADDRESS */ +DATA 4, MX6_IOM_GRP_ADDDS, 0x00000028 +DATA 4, MX6_IOM_DRAM_CAS, 0x00000028 +DATA 4, MX6_IOM_DRAM_RAS, 0x00000028 + +/* CONTROL */ +DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030 +DATA 4, MX6_IOM_DRAM_RESET, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000 +DATA 4, MX6_IOM_DRAM_SDODT0, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDODT1, 0x00000028 + +/* CLOCK */ +DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000028 +DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000028 + +/* + * DDR3 SETTINGS + * Read Data Bit Delay + */ +DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333 +DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333 + + +/* Write Leveling */ +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001F001F +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F0001 +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F + +/* DQS gating, read delay, write delay calibration values */ +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x431A0326 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x0323031B +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x433F0340 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x0345031C + +/* Read calibration */ +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x40343137 +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x40372F45 + +/* write calibration */ +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x32414741 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4731473C + +/* Complete calibration by forced measurement: */ +DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 +DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 + +/* + * MMDC init: + * in DDR3, 64-bit mode, only MMDC0 is init + */ +DATA 4, MX6_MMDC_P0_MDPDC, 0x00020036 +DATA 4, MX6_MMDC_P0_MDOTC, 0x09444040 + +DATA 4, MX6_MMDC_P0_MDCFG0, 0x898E7955 +DATA 4, MX6_MMDC_P0_MDCFG1, 0xFF328F64 +DATA 4, MX6_MMDC_P0_MDCFG2, 0x01FF00DB + +DATA 4, MX6_MMDC_P0_MDMISC, 0x00001740 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000 +DATA 4, MX6_MMDC_P0_MDRWD, 0x000026D2 +DATA 4, MX6_MMDC_P0_MDOR, 0x008E1023 + +/* CS0_END = 2304MB in step da 256Mb -> [(2304*8/256) - 1] */ +DATA 4, MX6_MMDC_P0_MDASP, 0x00000047 + +/* SDE_1=0; ROW=3; BL=1; DSIZ=2 -> 64 bit */ +DATA 4, MX6_MMDC_P0_MDCTL, 0x841A0000 + +/* Initialize DDR3 on CS_0 and CS_1 */ +DATA 4, MX6_MMDC_P0_MDSCR, 0x02088032 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00048031 + +/* P0 01c */ +/* write 0x0940 to MR0 bank_0 (Burst Type=1 (Interlived)) */ +DATA 4, MX6_MMDC_P0_MDSCR, 0x09408030 + +/*ZQ - Calibrationi */ +DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003 +DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040 +DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 + +DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 +DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 + +DATA 4, MX6_MMDC_P0_MDPDC, 0x00025576 + +DATA 4, MX6_MMDC_P0_MAPSR, 0x00011006 +DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 + +/* set the default clock gate to save power */ +DATA 4, CCM_CCGR0, 0x00C03F3F +DATA 4, CCM_CCGR1, 0x0030FC03 +DATA 4, CCM_CCGR2, 0x0FFFC000 +DATA 4, CCM_CCGR3, 0x3FF00000 +DATA 4, CCM_CCGR4, 0x00FFF300 +DATA 4, CCM_CCGR5, 0x0F0000C3 +DATA 4, CCM_CCGR6, 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4, MX6_IOMUXC_GPR4, 0xF00000FF + +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4, MX6_IOMUXC_GPR6, 0x007F007F +DATA 4, MX6_IOMUXC_GPR7, 0x007F007F + diff --git a/board/seco/mx6quq7/mx6quq7.c b/board/seco/mx6quq7/mx6quq7.c new file mode 100644 index 0000000..ea1d4b8 --- /dev/null +++ b/board/seco/mx6quq7/mx6quq7.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2013 Freescale Semiconductor, Inc. + * Copyright (C) 2015 ECA Sinters + * + * Author: Fabio Estevam <fabio.estevam@freescale.com> + * Modified by: Boris Brezillon <boris.brezillon@free-electrons.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <asm/arch/clock.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/iomux.h> +#include <asm/arch/mx6-pins.h> +#include <asm/errno.h> +#include <asm/gpio.h> +#include <asm/imx-common/iomux-v3.h> +#include <asm/imx-common/boot_mode.h> +#include <malloc.h> +#include <mmc.h> +#include <fsl_esdhc.h> +#include <miiphy.h> +#include <netdev.h> +#include <asm/arch/mxc_hdmi.h> +#include <asm/arch/crm_regs.h> +#include <linux/fb.h> +#include <ipu_pixfmt.h> +#include <asm/io.h> +#include <asm/arch/sys_proto.h> +#include <micrel.h> +#include <asm/imx-common/mxc_i2c.h> +#include <i2c.h> + +#include "../common/mx6.h" + +DECLARE_GLOBAL_DATA_PTR; + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +int board_early_init_f(void) +{ + seco_mx6_setup_uart_iomux(); + + return 0; +} + +int board_phy_config(struct phy_device *phydev) +{ + seco_mx6_rgmii_rework(phydev); + if (phydev->drv->config) + phydev->drv->config(phydev); + + return 0; +} + +int board_eth_init(bd_t *bis) +{ + uint32_t base = IMX_FEC_BASE; + struct mii_dev *bus = NULL; + struct phy_device *phydev = NULL; + int ret = 0; + + seco_mx6_setup_enet_iomux(); + +#ifdef CONFIG_FEC_MXC + bus = fec_get_miibus(base, -1); + if (!bus) + return -ENOMEM; + + /* scan phy 4,5,6,7 */ + phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII); + if (!phydev) { + free(bus); + return -ENOMEM; + } + + printf("using phy at %d\n", phydev->addr); + ret = fec_probe(bis, -1, base, bus, phydev); + if (ret) { + free(phydev); + free(bus); + printf("FEC MXC: %s:failed\n", __func__); + } +#endif + + return ret; +} + +static struct fsl_esdhc_cfg usdhc_cfg[2] = { + {USDHC3_BASE_ADDR}, + {USDHC2_BASE_ADDR}, +}; + +int board_mmc_init(bd_t *bis) +{ + u32 index = 0; + int ret; + + /* + * Following map is done: + * (U-boot device node) (Physical Port) + * mmc0 eMMC on Board + * mmc1 Ext SD + */ + for (index = 0; index < CONFIG_SYS_FSL_USDHC_NUM; ++index) { + switch (index) { + case 0: + seco_mx6_setup_usdhc_iomux(3); + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[0].max_bus_width = 4; + break; + case 1: + seco_mx6_setup_usdhc_iomux(4); + usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK); + usdhc_cfg[1].max_bus_width = 4; + break; + + default: + printf("Warning: %d exceed maximum number of SD ports %d\n", + index + 1, CONFIG_SYS_FSL_USDHC_NUM); + return -EINVAL; + } + + ret = fsl_esdhc_initialize(bis, &usdhc_cfg[index]); + if (ret) + return ret; + } + + return 0; +} + +int board_init(void) +{ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + imx_iomux_v3_setup_pad(MX6_PAD_NANDF_D4__GPIO2_IO04 | + MUX_PAD_CTRL(NO_PAD_CTRL)); + + gpio_direction_output(IMX_GPIO_NR(2, 4), 0); + + /* Set Low */ + gpio_set_value(IMX_GPIO_NR(2, 4), 0); + udelay(1000); + + /* Set High */ + gpio_set_value(IMX_GPIO_NR(2, 4), 1); + + return 0; +} + +int checkboard(void) +{ + puts("Board: SECO uQ7\n"); + + return 0; +} diff --git a/board/socrates/nand.c b/board/socrates/nand.c index 7394478..15e6ea6 100644 --- a/board/socrates/nand.c +++ b/board/socrates/nand.c @@ -18,9 +18,6 @@ static void sc_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len); static u_char sc_nand_read_byte(struct mtd_info *mtd); static u16 sc_nand_read_word(struct mtd_info *mtd); static void sc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len); -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -static int sc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len); -#endif static int sc_nand_device_ready(struct mtd_info *mtdinfo); #define FPGA_NAND_CMD_MASK (0x7 << 28) @@ -102,25 +99,6 @@ static void sc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) } } -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -/** - * sc_nand_verify_buf - Verify chip data against buffer - * @mtd: MTD device structure - * @buf: buffer containing the data to compare - * @len: number of bytes to compare - */ -static int sc_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - int i; - - for (i = 0; i < len; i++) { - if (buf[i] != sc_nand_read_byte(mtd)); - return -EFAULT; - } - return 0; -} -#endif - /** * sc_nand_device_ready - Check the NAND device is ready for next command. * @mtd: MTD device structure @@ -178,9 +156,6 @@ int board_nand_init(struct nand_chip *nand) nand->read_word = sc_nand_read_word; nand->write_buf = sc_nand_write_buf; nand->read_buf = sc_nand_read_buf; -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - nand->verify_buf = sc_nand_verify_buf; -#endif return 0; } diff --git a/board/sunxi/Kconfig b/board/sunxi/Kconfig index 9d0eb91..2fcab60 100644 --- a/board/sunxi/Kconfig +++ b/board/sunxi/Kconfig @@ -132,6 +132,10 @@ endchoice endif +config SYS_CLK_FREQ + default 912000000 if MACH_SUN7I + default 1008000000 if MACH_SUN4I || MACH_SUN5I || MACH_SUN6I || MACH_SUN8I + config SYS_CONFIG_NAME default "sun4i" if MACH_SUN4I default "sun5i" if MACH_SUN5I diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS index ef3c937..be48213 100644 --- a/board/sunxi/MAINTAINERS +++ b/board/sunxi/MAINTAINERS @@ -21,6 +21,7 @@ F: configs/A13-OLinuXinoM_defconfig F: configs/Auxtek-T004_defconfig F: configs/mk802_a10s_defconfig F: configs/r7-tv-dongle_defconfig +F: configs/UTOO_P66_defconfig F: include/configs/sun6i.h F: configs/CSQ_CS908_defconfig F: configs/Mele_M9_defconfig diff --git a/board/sunxi/board.c b/board/sunxi/board.c index e1891d1..808bf82 100644 --- a/board/sunxi/board.c +++ b/board/sunxi/board.c @@ -215,7 +215,7 @@ void sunxi_board_init(void) * assured it's being powered with suitable core voltage */ if (!power_failed) - clock_set_pll1(CONFIG_CLK_FULL_SPEED); + clock_set_pll1(CONFIG_SYS_CLK_FREQ); else printf("Failed to set core voltage! Can't set CPU frequency\n"); } diff --git a/board/ti/am335x/Kconfig b/board/ti/am335x/Kconfig index 722f9d5..7cb006f 100644 --- a/board/ti/am335x/Kconfig +++ b/board/ti/am335x/Kconfig @@ -47,10 +47,4 @@ config DM_GPIO config DM_SERIAL default y if DM -config SYS_MALLOC_F - default y if DM - -config SYS_MALLOC_F_LEN - default 0x400 if DM - endif diff --git a/common/board_f.c b/common/board_f.c index 55ede07..f7ffa54 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -494,7 +494,7 @@ static int reserve_trace(void) #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) && \ !defined(CONFIG_ARM) && !defined(CONFIG_X86) && \ - !defined(CONFIG_BLACKFIN) + !defined(CONFIG_BLACKFIN) && !defined(CONFIG_M68K) static int reserve_video(void) { /* reserve memory for video display (always full pages) */ @@ -968,7 +968,7 @@ static init_fnc_t init_sequence_f[] = { /* TODO: Why the dependency on CONFIG_8xx? */ #if defined(CONFIG_VIDEO) && (!defined(CONFIG_PPC) || defined(CONFIG_8xx)) && \ !defined(CONFIG_ARM) && !defined(CONFIG_X86) && \ - !defined(CONFIG_BLACKFIN) + !defined(CONFIG_BLACKFIN) && !defined(CONFIG_M68K) reserve_video, #endif #if !defined(CONFIG_BLACKFIN) && !defined(CONFIG_NIOS2) @@ -1080,7 +1080,9 @@ void board_init_f_r(void) /* NOTREACHED - board_init_r() does not return */ hang(); } -#else +#endif /* CONFIG_X86 */ + +#ifndef CONFIG_X86 ulong board_init_f_mem(ulong top) { /* Leave space for the stack we are running with now */ @@ -1098,4 +1100,4 @@ ulong board_init_f_mem(ulong top) return top; } -#endif /* CONFIG_X86 */ +#endif /* !CONFIG_X86 */ diff --git a/common/cmd_nand.c b/common/cmd_nand.c index 7f962dc..17fa7ea 100644 --- a/common/cmd_nand.c +++ b/common/cmd_nand.c @@ -419,10 +419,13 @@ static int raw_access(nand_info_t *nand, ulong addr, loff_t off, ulong count, .mode = MTD_OPS_RAW }; - if (read) + if (read) { ret = mtd_read_oob(nand, off, &ops); - else + } else { ret = mtd_write_oob(nand, off, &ops); + if (!ret) + ret = nand_verify_page_oob(nand, &ops, off); + } if (ret) { printf("%s: error at offset %llx, ret %d\n", @@ -690,7 +693,8 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) else ret = nand_write_skip_bad(nand, off, &rwsize, NULL, maxsize, - (u_char *)addr, 0); + (u_char *)addr, + WITH_WR_VERIFY); #ifdef CONFIG_CMD_NAND_TRIMFFS } else if (!strcmp(s, ".trimffs")) { if (read) { @@ -699,17 +703,7 @@ static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) } ret = nand_write_skip_bad(nand, off, &rwsize, NULL, maxsize, (u_char *)addr, - WITH_DROP_FFS); -#endif -#ifdef CONFIG_CMD_NAND_YAFFS - } else if (!strcmp(s, ".yaffs")) { - if (read) { - printf("Unknown nand command suffix '%s'.\n", s); - return 1; - } - ret = nand_write_skip_bad(nand, off, &rwsize, NULL, - maxsize, (u_char *)addr, - WITH_YAFFS_OOB); + WITH_DROP_FFS | WITH_WR_VERIFY); #endif } else if (!strcmp(s, ".oob")) { /* out-of-band data */ @@ -853,11 +847,6 @@ static char nand_help_text[] = " 'addr', skipping bad blocks and dropping any pages at the end\n" " of eraseblocks that contain only 0xFF\n" #endif -#ifdef CONFIG_CMD_NAND_YAFFS - "nand write.yaffs - addr off|partition size\n" - " write 'size' bytes starting at offset 'off' with yaffs format\n" - " from memory address 'addr', skipping bad blocks.\n" -#endif "nand erase[.spread] [clean] off size - erase 'size' bytes " "from offset 'off'\n" " With '.spread', erase enough for given file size, otherwise,\n" diff --git a/configs/A10-OLinuXino-Lime_defconfig b/configs/A10-OLinuXino-Lime_defconfig index 48a0705..3e19424 100644 --- a/configs/A10-OLinuXino-Lime_defconfig +++ b/configs/A10-OLinuXino-Lime_defconfig @@ -7,3 +7,4 @@ CONFIG_MACH_SUN4I=y CONFIG_DRAM_CLK=480 CONFIG_DRAM_ZQ=123 CONFIG_DRAM_EMR1=4 +CONFIG_SYS_CLK_FREQ=912000000 diff --git a/configs/Cubietruck_defconfig b/configs/Cubietruck_defconfig index 5c23bc7..fa48331 100644 --- a/configs/Cubietruck_defconfig +++ b/configs/Cubietruck_defconfig @@ -1,6 +1,7 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPH(12),USB_EHCI" CONFIG_FDTFILE="sun7i-a20-cubietruck.dtb" +CONFIG_GMAC_TX_DELAY=1 CONFIG_VIDEO_VGA=y CONFIG_ARM=y CONFIG_ARCH_SUNXI=y diff --git a/configs/Linksprite_pcDuino3_fdt_defconfig b/configs/Linksprite_pcDuino3_fdt_defconfig index 1504664..7690d1e 100644 --- a/configs/Linksprite_pcDuino3_fdt_defconfig +++ b/configs/Linksprite_pcDuino3_fdt_defconfig @@ -13,5 +13,3 @@ CONFIG_MACH_SUN7I=y CONFIG_DRAM_CLK=480 CONFIG_DRAM_ZQ=122 CONFIG_DRAM_EMR1=4 -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/am335x_igep0033_defconfig b/configs/am335x_igep0033_defconfig index 8d38e26..7ff0a13 100644 --- a/configs/am335x_igep0033_defconfig +++ b/configs/am335x_igep0033_defconfig @@ -3,5 +3,3 @@ CONFIG_SPL_STACK_R=y CONFIG_SPL_STACK_R_ADDR=0x82000000 CONFIG_ARM=y CONFIG_TARGET_AM335X_IGEP0033=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/at91sam9m10g45ek_mmc_defconfig b/configs/at91sam9m10g45ek_mmc_defconfig index 6949d3a..f3e1ebe 100644 --- a/configs/at91sam9m10g45ek_mmc_defconfig +++ b/configs/at91sam9m10g45ek_mmc_defconfig @@ -1,3 +1,4 @@ +CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_MMC" CONFIG_ARM=y CONFIG_ARCH_AT91=y diff --git a/configs/at91sam9m10g45ek_nandflash_defconfig b/configs/at91sam9m10g45ek_nandflash_defconfig index 30967e3..5e0b16e 100644 --- a/configs/at91sam9m10g45ek_nandflash_defconfig +++ b/configs/at91sam9m10g45ek_nandflash_defconfig @@ -1,3 +1,4 @@ +CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH" CONFIG_ARM=y CONFIG_ARCH_AT91=y diff --git a/configs/at91sam9n12ek_nandflash_defconfig b/configs/at91sam9n12ek_nandflash_defconfig index f908246..11b42d4 100644 --- a/configs/at91sam9n12ek_nandflash_defconfig +++ b/configs/at91sam9n12ek_nandflash_defconfig @@ -1,3 +1,4 @@ +CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_NANDFLASH" CONFIG_ARM=y CONFIG_ARCH_AT91=y diff --git a/configs/at91sam9n12ek_spiflash_defconfig b/configs/at91sam9n12ek_spiflash_defconfig index d106b5a..5426bcd 100644 --- a/configs/at91sam9n12ek_spiflash_defconfig +++ b/configs/at91sam9n12ek_spiflash_defconfig @@ -1,3 +1,4 @@ +CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9N12,SYS_USE_SPIFLASH" CONFIG_ARM=y CONFIG_ARCH_AT91=y diff --git a/configs/at91sam9x5ek_nandflash_defconfig b/configs/at91sam9x5ek_nandflash_defconfig index c2ebb00..6eea1af 100644 --- a/configs/at91sam9x5ek_nandflash_defconfig +++ b/configs/at91sam9x5ek_nandflash_defconfig @@ -1,3 +1,4 @@ +CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_NANDFLASH" CONFIG_ARM=y CONFIG_ARCH_AT91=y diff --git a/configs/at91sam9x5ek_spiflash_defconfig b/configs/at91sam9x5ek_spiflash_defconfig index 76f68a6..7ef1534 100644 --- a/configs/at91sam9x5ek_spiflash_defconfig +++ b/configs/at91sam9x5ek_spiflash_defconfig @@ -1,3 +1,4 @@ +CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9X5,SYS_USE_SPIFLASH" CONFIG_ARM=y CONFIG_ARCH_AT91=y diff --git a/configs/cm_fx6_defconfig b/configs/cm_fx6_defconfig index 2fd21cf..f10a5c2 100644 --- a/configs/cm_fx6_defconfig +++ b/configs/cm_fx6_defconfig @@ -5,5 +5,3 @@ CONFIG_TARGET_CM_FX6=y CONFIG_DM=y CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/cm_t335_defconfig b/configs/cm_t335_defconfig index 086e526..d189799 100644 --- a/configs/cm_t335_defconfig +++ b/configs/cm_t335_defconfig @@ -1,5 +1,3 @@ CONFIG_SPL=y CONFIG_ARM=y CONFIG_TARGET_CM_T335=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/corvus_defconfig b/configs/corvus_defconfig index 266a2ab..0427e9e 100644 --- a/configs/corvus_defconfig +++ b/configs/corvus_defconfig @@ -1,5 +1,5 @@ CONFIG_SPL=y -CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,SYS_USE_NANDFLASH" +CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH" CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_TARGET_CORVUS=y diff --git a/configs/gwventana_defconfig b/configs/gwventana_defconfig index 6eab019..d6bbdc1 100644 --- a/configs/gwventana_defconfig +++ b/configs/gwventana_defconfig @@ -3,4 +3,3 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/imx-common/spl_sd.cfg,MX6QDL" CONFIG_ARM=y CONFIG_TARGET_GW_VENTANA=y CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/mx6dlsabreauto_defconfig b/configs/mx6dlsabreauto_defconfig index 47f3f87..8bc5e8b 100644 --- a/configs/mx6dlsabreauto_defconfig +++ b/configs/mx6dlsabreauto_defconfig @@ -1,7 +1,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/mx6dl.cfg,MX6DL" CONFIG_ARM=y CONFIG_TARGET_MX6QSABREAUTO=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_DM=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6dlsabresd_defconfig b/configs/mx6dlsabresd_defconfig index 6adfd55..cde0d70 100644 --- a/configs/mx6dlsabresd_defconfig +++ b/configs/mx6dlsabresd_defconfig @@ -1,5 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6dlsabresd.cfg,MX6DL" CONFIG_ARM=y CONFIG_TARGET_MX6SABRESD=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_DM=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6qsabreauto_defconfig b/configs/mx6qsabreauto_defconfig index ab72942..ba9e512 100644 --- a/configs/mx6qsabreauto_defconfig +++ b/configs/mx6qsabreauto_defconfig @@ -1,7 +1,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg,MX6Q" CONFIG_ARM=y CONFIG_TARGET_MX6QSABREAUTO=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_DM=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6qsabresd_defconfig b/configs/mx6qsabresd_defconfig index 112918b..1764b39 100644 --- a/configs/mx6qsabresd_defconfig +++ b/configs/mx6qsabresd_defconfig @@ -1,7 +1,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg,MX6Q" CONFIG_ARM=y CONFIG_TARGET_MX6SABRESD=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_DM=y CONFIG_DM_THERMAL=y diff --git a/configs/mx6slevk_defconfig b/configs/mx6slevk_defconfig index fb8c4de..c6b3108 100644 --- a/configs/mx6slevk_defconfig +++ b/configs/mx6slevk_defconfig @@ -1,3 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL" CONFIG_ARM=y CONFIG_TARGET_MX6SLEVK=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/configs/mx6slevk_spinor_defconfig b/configs/mx6slevk_spinor_defconfig index 93efe73..454cb40 100644 --- a/configs/mx6slevk_spinor_defconfig +++ b/configs/mx6slevk_spinor_defconfig @@ -1,3 +1,7 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6slevk/imximage.cfg,MX6SL,SYS_BOOT_SPINOR" CONFIG_ARM=y CONFIG_TARGET_MX6SLEVK=y +CONFIG_SYS_MALLOC_F=y +CONFIG_SYS_MALLOC_F_LEN=0x400 +CONFIG_DM=y +CONFIG_DM_THERMAL=y diff --git a/configs/mx6sxsabresd_defconfig b/configs/mx6sxsabresd_defconfig index cc82322..5c862cf 100644 --- a/configs/mx6sxsabresd_defconfig +++ b/configs/mx6sxsabresd_defconfig @@ -1,7 +1,5 @@ CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6sxsabresd/imximage.cfg,MX6SX" CONFIG_ARM=y CONFIG_TARGET_MX6SXSABRESD=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_DM=y CONFIG_DM_THERMAL=y diff --git a/configs/nokia_rx51_defconfig b/configs/nokia_rx51_defconfig index 1bb7664..20a51e1 100644 --- a/configs/nokia_rx51_defconfig +++ b/configs/nokia_rx51_defconfig @@ -4,5 +4,3 @@ CONFIG_TARGET_NOKIA_RX51=y CONFIG_DM=n CONFIG_DM_SERIAL=n CONFIG_DM_GPIO=n -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/pcm051_rev1_defconfig b/configs/pcm051_rev1_defconfig index f417aac..08075e7 100644 --- a/configs/pcm051_rev1_defconfig +++ b/configs/pcm051_rev1_defconfig @@ -2,5 +2,3 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="REV1" CONFIG_ARM=y CONFIG_TARGET_PCM051=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/pcm051_rev3_defconfig b/configs/pcm051_rev3_defconfig index cc6f3f5..56deb48 100644 --- a/configs/pcm051_rev3_defconfig +++ b/configs/pcm051_rev3_defconfig @@ -2,5 +2,3 @@ CONFIG_SPL=y CONFIG_SYS_EXTRA_OPTIONS="REV3" CONFIG_ARM=y CONFIG_TARGET_PCM051=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/pengwyn_defconfig b/configs/pengwyn_defconfig index 9c6ddf4..6346b57 100644 --- a/configs/pengwyn_defconfig +++ b/configs/pengwyn_defconfig @@ -1,5 +1,3 @@ CONFIG_SPL=y CONFIG_ARM=y CONFIG_TARGET_PENGWYN=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/pepper_defconfig b/configs/pepper_defconfig index e14b008..3b042ec 100644 --- a/configs/pepper_defconfig +++ b/configs/pepper_defconfig @@ -1,5 +1,3 @@ CONFIG_SPL=y CONFIG_ARM=y CONFIG_TARGET_PEPPER=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/rpi_2_defconfig b/configs/rpi_2_defconfig index b539d4a..965fcae 100644 --- a/configs/rpi_2_defconfig +++ b/configs/rpi_2_defconfig @@ -1,4 +1,3 @@ CONFIG_ARM=y +CONFIG_ARCH_BCM283X=y CONFIG_TARGET_RPI_2=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/rpi_defconfig b/configs/rpi_defconfig index 98d3199..8de1d9f 100644 --- a/configs/rpi_defconfig +++ b/configs/rpi_defconfig @@ -1,4 +1,3 @@ CONFIG_ARM=y +CONFIG_ARCH_BCM283X=y CONFIG_TARGET_RPI=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/s5p_goni_defconfig b/configs/s5p_goni_defconfig index 33e6fb8..618e590 100644 --- a/configs/s5p_goni_defconfig +++ b/configs/s5p_goni_defconfig @@ -2,5 +2,3 @@ CONFIG_ARM=y CONFIG_ARCH_S5PC1XX=y CONFIG_TARGET_S5P_GONI=y CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni" -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index 70f5b86..a216039 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -5,8 +5,6 @@ CONFIG_FIT_VERBOSE=y CONFIG_FIT_SIGNATURE=y CONFIG_DM=y CONFIG_DEFAULT_DEVICE_TREE="sandbox" -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 CONFIG_CROS_EC=y CONFIG_DM_CROS_EC=y CONFIG_CROS_EC_SANDBOX=y diff --git a/configs/secomx6quq7_defconfig b/configs/secomx6quq7_defconfig new file mode 100644 index 0000000..dcd681d --- /dev/null +++ b/configs/secomx6quq7_defconfig @@ -0,0 +1,7 @@ +CONFIG_SYS_EXTRA_OPTIONS="ENV_IS_IN_MMC" +CONFIG_ARM=y +CONFIG_ARCH_MX6=y +CONFIG_TARGET_SECOMX6=y +CONFIG_SECOMX6_UQ7=y +CONFIG_SECOMX6Q=y +CONFIG_SECOMX6_2GB=y diff --git a/configs/smdkc100_defconfig b/configs/smdkc100_defconfig index e933a32..041030f 100644 --- a/configs/smdkc100_defconfig +++ b/configs/smdkc100_defconfig @@ -2,5 +2,3 @@ CONFIG_ARM=y CONFIG_TARGET_SMDKC100=y CONFIG_ARCH_S5PC1XX=y CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100" -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/snapper9260_defconfig b/configs/snapper9260_defconfig index 3a47505..576d9c5 100644 --- a/configs/snapper9260_defconfig +++ b/configs/snapper9260_defconfig @@ -5,5 +5,3 @@ CONFIG_TARGET_SNAPPER9260=y CONFIG_DM=y CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/snapper9g20_defconfig b/configs/snapper9g20_defconfig index 1f0244b..07a2643 100644 --- a/configs/snapper9g20_defconfig +++ b/configs/snapper9g20_defconfig @@ -5,5 +5,3 @@ CONFIG_TARGET_SNAPPER9260=y CONFIG_DM=y CONFIG_DM_GPIO=y CONFIG_DM_SERIAL=y -CONFIG_SYS_MALLOC_F=y -CONFIG_SYS_MALLOC_F_LEN=0x400 diff --git a/configs/stv0991_defconfig b/configs/stv0991_defconfig index 1c9ba88..e8cf311 100644 --- a/configs/stv0991_defconfig +++ b/configs/stv0991_defconfig @@ -1,7 +1,6 @@ CONFIG_SYS_EXTRA_OPTIONS="stv0991" CONFIG_ARM=y CONFIG_TARGET_STV0991=y -CONFIG_SYS_MALLOC_F=y CONFIG_SYS_MALLOC_F_LEN=0x2000 CONFIG_DM=y CONFIG_DM_SERIAL=y diff --git a/configs/vexpress_aemv8a_defconfig b/configs/vexpress_aemv8a_defconfig deleted file mode 100644 index 9f4b876..0000000 --- a/configs/vexpress_aemv8a_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_ARM=y -CONFIG_TARGET_VEXPRESS64_AEMV8A=y -CONFIG_DEFAULT_DEVICE_TREE="vexpress64" diff --git a/doc/README.distro b/doc/README.distro index dd0f1c7..0308a4c 100644 --- a/doc/README.distro +++ b/doc/README.distro @@ -1,6 +1,7 @@ /* * (C) Copyright 2014 Red Hat Inc. * Copyright (c) 2014-2015, NVIDIA CORPORATION. All rights reserved. + * Copyright (C) 2015 K. Merker <merker@debian.org> * * SPDX-License-Identifier: GPL-2.0+ */ @@ -339,3 +340,49 @@ scan_dev_for_scripts: If you want to disable boot.scr on all disks, set the value to something innocuous, e.g. setenv scan_dev_for_scripts true. + + +Interactively booting from a specific device at the u-boot prompt +================================================================= + +For interactively booting from a user-selected device at the u-boot command +prompt, the environment provides predefined bootcmd_<target> variables for +every target defined in boot_targets, which can be run be the user. + +If the target is a storage device, the format of the target is always +<device type><device number>, e.g. mmc0. Specifying the device number is +mandatory for storage devices, even if only support for a single instance +of the storage device is actually implemented. + +For network targets (dhcp, pxe), only the device type gets specified; +they do not have a device number. + +Examples: + + - run bootcmd_usb0 + boots from the first USB mass storage device + + - run bootcmd_mmc1 + boots from the second MMC device + + - run bootcmd_pxe + boots by tftp using a pxelinux.cfg + +The list of possible targets consists of: + +- network targets + * dhcp + * pxe + +- storage targets (to which a device number must be appended) + * mmc + * sata + * scsi + * ide + * usb + +Other *boot* variables than the ones defined above are only for internal use +of the boot environment and are not guaranteed to exist or work in the same +way in future u-boot versions. In particular the <device type>_boot +variables (e.g. mmc_boot, usb_boot) are a strictly internal implementation +detail and must not be used as a public interface. diff --git a/doc/README.drivers.eth b/doc/README.drivers.eth index eb83038..42af442 100644 --- a/doc/README.drivers.eth +++ b/doc/README.drivers.eth @@ -43,15 +43,16 @@ int ape_register(bd_t *bis, int iobase) { struct ape_priv *priv; struct eth_device *dev; + struct mii_dev *bus; priv = malloc(sizeof(*priv)); if (priv == NULL) - return 1; + return -ENOMEM; dev = malloc(sizeof(*dev)); if (dev == NULL) { free(priv); - return 1; + return -ENOMEM; } /* setup whatever private state you need */ @@ -59,7 +60,8 @@ int ape_register(bd_t *bis, int iobase) memset(dev, 0, sizeof(*dev)); sprintf(dev->name, "APE"); - /* if your device has dedicated hardware storage for the + /* + * if your device has dedicated hardware storage for the * MAC, read it and initialize dev->enetaddr with it */ ape_mac_read(dev->enetaddr); @@ -74,8 +76,17 @@ int ape_register(bd_t *bis, int iobase) eth_register(dev); -#ifdef CONFIG_CMD_MII) - miiphy_register(dev->name, ape_mii_read, ape_mii_write); +#ifdef CONFIG_PHYLIB + bus = mdio_alloc(); + if (!bus) { + free(priv); + free(dev); + return -ENOMEM; + } + + bus->read = ape_mii_read; + bus->write = ape_mii_write; + mdio_register(bus); #endif return 1; @@ -166,25 +177,33 @@ some net operation (ping / tftp / whatever...) eth_halt() dev->halt() ------------------------------ - CONFIG_MII / CONFIG_CMD_MII ------------------------------ +-------------------------------- + CONFIG_PHYLIB / CONFIG_CMD_MII +-------------------------------- If your device supports banging arbitrary values on the MII bus (pretty much every device does), you should add support for the mii command. Doing so is fairly trivial and makes debugging mii issues a lot easier at runtime. After you have called eth_register() in your driver's register function, add -a call to miiphy_register() like so: -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - miiphy_register(dev->name, mii_read, mii_write); -#endif +a call to mdio_alloc() and mdio_register() like so: + bus = mdio_alloc(); + if (!bus) { + free(priv); + free(dev); + return -ENOMEM; + } + + bus->read = ape_mii_read; + bus->write = ape_mii_write; + mdio_register(bus); And then define the mii_read and mii_write functions if you haven't already. Their syntax is straightforward: - int mii_read(char *devname, uchar addr, uchar reg, ushort *val); - int mii_write(char *devname, uchar addr, uchar reg, ushort val); + int mii_read(struct mii_dev *bus, int addr, int devad, int reg); + int mii_write(struct mii_dev *bus, int addr, int devad, int reg, + u16 val); The read function should read the register 'reg' from the phy at address 'addr' -and store the result in the pointer 'val'. The implementation for the write -function should logically follow. +and return the result to its caller. The implementation for the write function +should logically follow. diff --git a/doc/README.generic-board b/doc/README.generic-board index 37c1b03..bd8eae1 100644 --- a/doc/README.generic-board +++ b/doc/README.generic-board @@ -44,16 +44,18 @@ The following architectures are supported now: arc arm + avr32 + blackfin + m68k + microblaze mips + nios2 powerpc sandbox x86 -If your architecture is not supported, you need to adjust your -arch/<arch>/config.mk file to include: - - __HAVE_ARCH_GENERIC_BOARD := y - +If your architecture is not supported, you need to select +HAVE_GENERIC_BOARD in arch/Kconfig and test it with a suitable board, as follows. diff --git a/doc/README.nand b/doc/README.nand index dee0e00..46d7edd 100644 --- a/doc/README.nand +++ b/doc/README.nand @@ -99,12 +99,6 @@ Configuration Options: CONFIG_CMD_NAND_TORTURE Enables the torture command (see description of this command below). - CONFIG_MTD_NAND_ECC_JFFS2 - Define this if you want the Error Correction Code information in - the out-of-band data to be formatted to match the JFFS2 file system. - CONFIG_MTD_NAND_ECC_YAFFS would be another useful choice for - someone to implement. - CONFIG_SYS_MAX_NAND_DEVICE The maximum number of NAND devices you want to support. @@ -312,12 +306,6 @@ Platform specific options NOTE: ===== -The current NAND implementation is based on what is in recent -Linux kernels. The old legacy implementation has been removed. - -If you have board code which used CONFIG_NAND_LEGACY, you'll need -to convert to the current NAND interface for it to continue to work. - The Disk On Chip driver is currently broken and has been for some time. There is a driver in drivers/mtd/nand, taken from Linux, that works with the current NAND system but has not yet been adapted to the u-boot diff --git a/doc/README.semihosting b/doc/README.semihosting index 7248560..c016a4f 100644 --- a/doc/README.semihosting +++ b/doc/README.semihosting @@ -30,25 +30,10 @@ vexpress_aemv8a.h but differentiate the two models by the presence or absence of CONFIG_BASE_FVP. This change is tested and works on both the Foundation and Base fastmodel simulators. -The level of semihosting support is minimal, restricted to just what it -takes to load images to memory. If more semihosting functionality is -required, such as file seek, outputting strings, reading characters, etc, -then it can be easily added later. +The semihosting code adds a command: -We require that the board include file define these env variables: -- kernel_name e.g. "uImage" -- kernel_addr_r e.g. "0x80000000" -- initrd_name e.g. "ramdisk.img" -- initrd_addr_r e.g. "0x88000000" -- fdt_name e.g. "devtree.dtb" -- fdt_addr_r e.g. "0x83000000" + smhload <image> <address> [env var] -Optionally, "fdt_high" and "initrd_high" can be specified as per -their rules for allowing or preventing copying of these images. - -For the "fdt chosen" startup macro, this code will then define: -- initrd_end (based on retrieving initrd_addr_r plus actual initrd_size) - -We will then load the kernel, initrd, and fdt into the specified -locations in memory in a similar way that the ATF fastmodel code -uses semihosting calls to load other boot stages and u-boot itself. +That will load an image from the host filesystem into RAM at the specified +address and optionally store the load end address in the specified +environment variable. diff --git a/doc/README.x86 b/doc/README.x86 index fb87682..0355d1c 100644 --- a/doc/README.x86 +++ b/doc/README.x86 @@ -105,6 +105,13 @@ in this FSP package too. Rename the first one to fsp.bin and second one to cmc.bin and put them in the board directory. +Note the FSP release version 001 has a bug which could cause random endless +loop during the FspInit call. This bug was published by Intel although Intel +did not describe any details. We need manually apply the patch to the FSP +binary using any hex editor (eg: bvi). Go to the offset 0x1fcd8 of the FSP +binary, change the following five bytes values from orginally E8 42 FF FF FF +to B8 00 80 0B 00. + Now you can build U-Boot and obtain u-boot.rom $ make crownbay_defconfig diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c index f9ee189..a975492 100644 --- a/drivers/dfu/dfu_nand.c +++ b/drivers/dfu/dfu_nand.c @@ -64,7 +64,7 @@ static int nand_block_op(enum dfu_op op, struct dfu_entity *dfu, return ret; /* then write */ ret = nand_write_skip_bad(nand, start, &count, &actual, - lim, buf, 0); + lim, buf, WITH_WR_VERIFY); } if (ret != 0) { diff --git a/drivers/mmc/bcm2835_sdhci.c b/drivers/mmc/bcm2835_sdhci.c index 92f7d89..4ec2968 100644 --- a/drivers/mmc/bcm2835_sdhci.c +++ b/drivers/mmc/bcm2835_sdhci.c @@ -39,8 +39,8 @@ #include <common.h> #include <malloc.h> #include <sdhci.h> -#include <asm/arch/timer.h> -#include <asm/arch-bcm2835/sdhci.h> +#include <mach/timer.h> +#include <mach/sdhci.h> /* 400KHz is max freq for card ID etc. Use that as min */ #define MIN_FREQ 400000 diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index b16e3aa..a2016e7 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -1456,6 +1456,9 @@ int board_nand_init(struct nand_chip *nand) nand->dev_ready = at91_nand_wait_ready; #endif nand->chip_delay = 20; +#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT + nand->bbt_options |= NAND_BBT_USE_FLASH; +#endif #ifdef CONFIG_ATMEL_NAND_HWECC #ifdef CONFIG_ATMEL_NAND_HW_PMECC @@ -1522,6 +1525,9 @@ int atmel_nand_chip_init(int devnum, ulong base_addr) nand->dev_ready = at91_nand_ready; #endif nand->chip_delay = 75; +#ifdef CONFIG_SYS_NAND_USE_FLASH_BBT + nand->bbt_options |= NAND_BBT_USE_FLASH; +#endif ret = nand_scan_ident(mtd, CONFIG_SYS_NAND_MAX_CHIPS, NULL); if (ret) diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 41689b5..a397074 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -405,18 +405,6 @@ static int nand_davinci_write_page(struct mtd_info *mtd, struct nand_chip *chip, goto err; } -#ifdef CONFIG_MTD_NAND_VERIFY_WRITE - /* Send command to read back the data */ - chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); - - if (chip->verify_buf(mtd, buf, mtd->writesize)) { - ret = -EIO; - goto err; - } - - /* Make sure the next page prog is preceded by a status read */ - chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); -#endif err: /* restore ECC layout */ if (page < CONFIG_KEYSTONE_NAND_MAX_RBL_PAGE) { diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 3372b64..e85832d 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -561,41 +561,6 @@ static void fsl_elbc_read_buf(struct mtd_info *mtd, u8 *buf, int len) len, avail); } -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -/* - * Verify buffer against the FCM Controller Data Buffer - */ -static int fsl_elbc_verify_buf(struct mtd_info *mtd, - const u_char *buf, int len) -{ - struct nand_chip *chip = mtd->priv; - struct fsl_elbc_mtd *priv = chip->priv; - struct fsl_elbc_ctrl *ctrl = priv->ctrl; - int i; - - if (len < 0) { - printf("write_buf of %d bytes", len); - return -EINVAL; - } - - if ((unsigned int)len > ctrl->read_bytes - ctrl->index) { - printf("verify_buf beyond end of buffer " - "(%d requested, %u available)\n", - len, ctrl->read_bytes - ctrl->index); - - ctrl->index = ctrl->read_bytes; - return -EINVAL; - } - - for (i = 0; i < len; i++) - if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i]) - break; - - ctrl->index += len; - return i == len && ctrl->status == LTESR_CC ? 0 : -EIO; -} -#endif - /* This function is called after Program and Erase Operations to * check for success or failure. */ @@ -727,9 +692,6 @@ static int fsl_elbc_chip_init(int devnum, u8 *addr) nand->read_byte = fsl_elbc_read_byte; nand->write_buf = fsl_elbc_write_buf; nand->read_buf = fsl_elbc_read_buf; -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - nand->verify_buf = fsl_elbc_verify_buf; -#endif nand->select_chip = fsl_elbc_select_chip; nand->cmdfunc = fsl_elbc_cmdfunc; nand->waitfunc = fsl_elbc_wait; diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index b283eae..7903eeb 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -683,41 +683,6 @@ static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len) __func__, len, avail); } -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -/* - * Verify buffer against the IFC Controller Data Buffer - */ -static int fsl_ifc_verify_buf(struct mtd_info *mtd, - const u_char *buf, int len) -{ - struct nand_chip *chip = mtd->priv; - struct fsl_ifc_mtd *priv = chip->priv; - struct fsl_ifc_ctrl *ctrl = priv->ctrl; - int i; - - if (len < 0) { - printf("%s of %d bytes", __func__, len); - return -EINVAL; - } - - if ((unsigned int)len > ctrl->read_bytes - ctrl->index) { - printf("%s beyond end of buffer " - "(%d requested, %u available)\n", - __func__, len, ctrl->read_bytes - ctrl->index); - - ctrl->index = ctrl->read_bytes; - return -EINVAL; - } - - for (i = 0; i < len; i++) - if (in_8(&ctrl->addr[ctrl->index + i]) != buf[i]) - break; - - ctrl->index += len; - return i == len && ctrl->status == IFC_NAND_EVTER_STAT_OPC ? 0 : -EIO; -} -#endif - /* This function is called after Program and Erase Operations to * check for success or failure. */ @@ -940,9 +905,6 @@ static int fsl_ifc_chip_init(int devnum, u8 *addr) nand->write_buf = fsl_ifc_write_buf; nand->read_buf = fsl_ifc_read_buf; -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - nand->verify_buf = fsl_ifc_verify_buf; -#endif nand->select_chip = fsl_ifc_select_chip; nand->cmdfunc = fsl_ifc_cmdfunc; nand->waitfunc = fsl_ifc_wait; diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c index 65ce98a..5426c32 100644 --- a/drivers/mtd/nand/fsl_upm.c +++ b/drivers/mtd/nand/fsl_upm.c @@ -153,21 +153,6 @@ static void upm_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) buf[i] = in_8(chip->IO_ADDR_R); } -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -static int upm_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - int i; - struct nand_chip *chip = mtd->priv; - - for (i = 0; i < len; i++) { - if (buf[i] != in_8(chip->IO_ADDR_R)) - return -EFAULT; - } - - return 0; -} -#endif - static int nand_dev_ready(struct mtd_info *mtd) { struct nand_chip *chip = mtd->priv; @@ -193,9 +178,6 @@ int fsl_upm_nand_init(struct nand_chip *chip, struct fsl_upm_nand *fun) chip->read_byte = upm_nand_read_byte; chip->read_buf = upm_nand_read_buf; chip->write_buf = upm_nand_write_buf; -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - chip->verify_buf = upm_nand_verify_buf; -#endif if (fun->dev_ready) chip->dev_ready = nand_dev_ready; diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c index 7233bfc..e621c36 100644 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ b/drivers/mtd/nand/mpc5121_nfc.c @@ -459,29 +459,6 @@ static void mpc5121_nfc_write_buf(struct mtd_info *mtd, mpc5121_nfc_buf_copy(mtd, (u_char *) buf, len, 1); } -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -/* Compare buffer with NAND flash */ -static int mpc5121_nfc_verify_buf(struct mtd_info *mtd, - const u_char * buf, int len) -{ - u_char tmp[256]; - uint bsize; - - while (len) { - bsize = min(len, 256); - mpc5121_nfc_read_buf(mtd, tmp, bsize); - - if (memcmp(buf, tmp, bsize)) - return 1; - - buf += bsize; - len -= bsize; - } - - return 0; -} -#endif - /* Read byte from NFC buffers */ static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd) { @@ -609,9 +586,6 @@ int board_nand_init(struct nand_chip *chip) chip->read_word = mpc5121_nfc_read_word; chip->read_buf = mpc5121_nfc_read_buf; chip->write_buf = mpc5121_nfc_write_buf; -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - chip->verify_buf = mpc5121_nfc_verify_buf; -#endif chip->select_chip = mpc5121_nfc_select_chip; chip->bbt_options = NAND_BBT_USE_FLASH; chip->ecc.mode = NAND_ECC_SOFT; diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 2e5b5b9..f12b07e 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -949,34 +949,6 @@ static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) host->col_addr = col; } -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -/* - * Used by the upper layer to verify the data in NAND Flash - * with the data in the buf. - */ -static int mxc_nand_verify_buf(struct mtd_info *mtd, - const u_char *buf, int len) -{ - u_char tmp[256]; - uint bsize; - - while (len) { - bsize = min(len, 256); - mxc_nand_read_buf(mtd, tmp, bsize); - - if (memcmp(buf, tmp, bsize)) - return 1; - - buf += bsize; - len -= bsize; - } - - return 0; -} -#endif -#endif - /* * This function is used by upper layer for select and * deselect of the NAND chip @@ -1207,11 +1179,6 @@ int board_nand_init(struct nand_chip *this) this->read_word = mxc_nand_read_word; this->write_buf = mxc_nand_write_buf; this->read_buf = mxc_nand_read_buf; -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - this->verify_buf = mxc_nand_verify_buf; -#endif -#endif host->regs = (struct mxc_nand_regs __iomem *)CONFIG_MXC_NAND_REGS_BASE; #ifdef MXC_NFC_V3_2 diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c index 7a064ab..2d2b938 100644 --- a/drivers/mtd/nand/mxs_nand.c +++ b/drivers/mtd/nand/mxs_nand.c @@ -453,7 +453,7 @@ static void mxs_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int length) d->cmd.data = MXS_DMA_DESC_COMMAND_NO_DMAXFER | MXS_DMA_DESC_IRQ | MXS_DMA_DESC_NAND_WAIT_4_READY | MXS_DMA_DESC_DEC_SEM | - MXS_DMA_DESC_WAIT4END | (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET); + MXS_DMA_DESC_WAIT4END | (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET); d->cmd.address = 0; @@ -510,7 +510,7 @@ static void mxs_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, d->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ | MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM | MXS_DMA_DESC_WAIT4END | - (4 << MXS_DMA_DESC_PIO_WORDS_OFFSET) | + (1 << MXS_DMA_DESC_PIO_WORDS_OFFSET) | (length << MXS_DMA_DESC_BYTES_OFFSET); d->cmd.address = (dma_addr_t)nand_info->data_buf; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 6db6566..c0e381a 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -361,51 +361,6 @@ void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) ioread8_rep(chip->IO_ADDR_R, buf, len); } -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -/** - * nand_verify_buf - [DEFAULT] Verify chip data against buffer - * @mtd: MTD device structure - * @buf: buffer containing the data to compare - * @len: number of bytes to compare - * - * Default verify function for 8bit buswidth. - */ -static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len) -{ - int i; - struct nand_chip *chip = mtd->priv; - - for (i = 0; i < len; i++) - if (buf[i] != readb(chip->IO_ADDR_R)) - return -EFAULT; - return 0; -} - -/** - * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer - * @mtd: MTD device structure - * @buf: buffer containing the data to compare - * @len: number of bytes to compare - * - * Default verify function for 16bit buswidth. - */ -static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) -{ - int i; - struct nand_chip *chip = mtd->priv; - u16 *p = (u16 *) buf; - len >>= 1; - - for (i = 0; i < len; i++) - if (p[i] != readw(chip->IO_ADDR_R)) - return -EFAULT; - - return 0; -} -#endif -#endif - /** * nand_write_buf16 - [DEFAULT] write buffer to chip * @mtd: MTD device structure @@ -2435,20 +2390,6 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, status = chip->waitfunc(mtd, chip); } - -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - /* Send command to read back the data */ - chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); - - if (chip->verify_buf(mtd, buf, mtd->writesize)) - return -EIO; - - /* Make sure the next page prog is preceded by a status read */ - chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); -#endif -#endif - return 0; } @@ -3139,12 +3080,6 @@ static void nand_set_defaults(struct nand_chip *chip, int busw) chip->read_buf = busw ? nand_read_buf16 : nand_read_buf; if (!chip->scan_bbt) chip->scan_bbt = nand_default_bbt; -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - if (!chip->verify_buf) - chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf; -#endif -#endif if (!chip->controller) { chip->controller = &chip->hwcontrol; diff --git a/drivers/mtd/nand/nand_util.c b/drivers/mtd/nand/nand_util.c index afdd160..12dd26a 100644 --- a/drivers/mtd/nand/nand_util.c +++ b/drivers/mtd/nand/nand_util.c @@ -464,6 +464,87 @@ static size_t drop_ffs(const nand_info_t *nand, const u_char *buf, #endif /** + * nand_verify_page_oob: + * + * Verify a page of NAND flash, including the OOB. + * Reads page of NAND and verifies the contents and OOB against the + * values in ops. + * + * @param nand NAND device + * @param ops MTD operations, including data to verify + * @param ofs offset in flash + * @return 0 in case of success + */ +int nand_verify_page_oob(nand_info_t *nand, struct mtd_oob_ops *ops, loff_t ofs) +{ + int rval; + struct mtd_oob_ops vops; + size_t verlen = nand->writesize + nand->oobsize; + + memcpy(&vops, ops, sizeof(vops)); + + vops.datbuf = malloc(verlen); + + if (!vops.datbuf) + return -ENOMEM; + + vops.oobbuf = vops.datbuf + nand->writesize; + + rval = mtd_read_oob(nand, ofs, &vops); + if (!rval) + rval = memcmp(ops->datbuf, vops.datbuf, vops.len); + if (!rval) + rval = memcmp(ops->oobbuf, vops.oobbuf, vops.ooblen); + + free(vops.datbuf); + + return rval ? -EIO : 0; +} + +/** + * nand_verify: + * + * Verify a region of NAND flash. + * Reads NAND in page-sized chunks and verifies the contents against + * the contents of a buffer. The offset into the NAND must be + * page-aligned, and the function doesn't handle skipping bad blocks. + * + * @param nand NAND device + * @param ofs offset in flash + * @param len buffer length + * @param buf buffer to read from + * @return 0 in case of success + */ +int nand_verify(nand_info_t *nand, loff_t ofs, size_t len, u_char *buf) +{ + int rval = 0; + size_t verofs; + size_t verlen = nand->writesize; + uint8_t *verbuf = malloc(verlen); + + if (!verbuf) + return -ENOMEM; + + /* Read the NAND back in page-size groups to limit malloc size */ + for (verofs = ofs; verofs < ofs + len; + verofs += verlen, buf += verlen) { + verlen = min(nand->writesize, (uint32_t)(ofs + len - verofs)); + rval = nand_read(nand, verofs, &verlen, verbuf); + if (!rval || (rval == -EUCLEAN)) + rval = memcmp(buf, verbuf, verlen); + + if (rval) + break; + } + + free(verbuf); + + return rval ? -EIO : 0; +} + + + +/** * nand_write_skip_bad: * * Write image to NAND flash. @@ -499,24 +580,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, if (actual) *actual = 0; -#ifdef CONFIG_CMD_NAND_YAFFS - if (flags & WITH_YAFFS_OOB) { - if (flags & ~WITH_YAFFS_OOB) - return -EINVAL; - - int pages; - pages = nand->erasesize / nand->writesize; - blocksize = (pages * nand->oobsize) + nand->erasesize; - if (*length % (nand->writesize + nand->oobsize)) { - printf("Attempt to write incomplete page" - " in yaffs mode\n"); - return -EINVAL; - } - } else -#endif - { - blocksize = nand->erasesize; - } + blocksize = nand->erasesize; /* * nand_write() handles unaligned, partial page writes. @@ -554,6 +618,10 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, if (!need_skip && !(flags & WITH_DROP_FFS)) { rval = nand_write(nand, offset, length, buffer); + + if ((flags & WITH_WR_VERIFY) && !rval) + rval = nand_verify(nand, offset, *length, buffer); + if (rval == 0) return 0; @@ -581,48 +649,22 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, else write_size = blocksize - block_offset; -#ifdef CONFIG_CMD_NAND_YAFFS - if (flags & WITH_YAFFS_OOB) { - int page, pages; - size_t pagesize = nand->writesize; - size_t pagesize_oob = pagesize + nand->oobsize; - struct mtd_oob_ops ops; - - ops.len = pagesize; - ops.ooblen = nand->oobsize; - ops.mode = MTD_OPS_AUTO_OOB; - ops.ooboffs = 0; - - pages = write_size / pagesize_oob; - for (page = 0; page < pages; page++) { - WATCHDOG_RESET(); - - ops.datbuf = p_buffer; - ops.oobbuf = ops.datbuf + pagesize; - - rval = mtd_write_oob(nand, offset, &ops); - if (rval != 0) - break; - - offset += pagesize; - p_buffer += pagesize_oob; - } - } - else -#endif - { - truncated_write_size = write_size; + truncated_write_size = write_size; #ifdef CONFIG_CMD_NAND_TRIMFFS - if (flags & WITH_DROP_FFS) - truncated_write_size = drop_ffs(nand, p_buffer, - &write_size); + if (flags & WITH_DROP_FFS) + truncated_write_size = drop_ffs(nand, p_buffer, + &write_size); #endif - rval = nand_write(nand, offset, &truncated_write_size, - p_buffer); - offset += write_size; - p_buffer += write_size; - } + rval = nand_write(nand, offset, &truncated_write_size, + p_buffer); + + if ((flags & WITH_WR_VERIFY) && !rval) + rval = nand_verify(nand, offset, + truncated_write_size, p_buffer); + + offset += write_size; + p_buffer += write_size; if (rval != 0) { printf("NAND write to offset %llx failed %d\n", diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index 2659595..8a68cb0 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -118,21 +118,6 @@ static void ndfc_write_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len out_be32((u32 *)(base + NDFC_DATA), *p++); } -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) -static int ndfc_verify_buf(struct mtd_info *mtdinfo, const uint8_t *buf, int len) -{ - struct nand_chip *this = mtdinfo->priv; - ulong base = (ulong) this->IO_ADDR_W & 0xffffff00; - uint32_t *p = (uint32_t *) buf; - - for (; len > 0; len -= 4) - if (*p++ != in_be32((u32 *)(base + NDFC_DATA))) - return -1; - - return 0; -} -#endif - /* * Read a byte from the NDFC. */ @@ -207,9 +192,6 @@ int board_nand_init(struct nand_chip *nand) #endif nand->write_buf = ndfc_write_buf; -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - nand->verify_buf = ndfc_verify_buf; -#endif nand->read_byte = ndfc_read_byte; chip++; diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c index 928d58b..d98dd28 100644 --- a/drivers/mtd/nand/vf610_nfc.c +++ b/drivers/mtd/nand/vf610_nfc.c @@ -146,6 +146,7 @@ struct vf610_nfc { void __iomem *regs; uint column; int spareonly; + int page_sz; int page; /* Status and ID are in alternate locations. */ int alt_buf; @@ -329,6 +330,11 @@ static void vf610_nfc_addr_cycle(struct mtd_info *mtd, int column, int page) ROW_ADDR_SHIFT, page); } +static inline void vf610_nfc_transfer_size(void __iomem *regbase, int size) +{ + __raw_writel(size, regbase + NFC_SECTOR_SIZE); +} + /* Send command to NAND chip */ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, int column, int page) @@ -342,12 +348,14 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, switch (command) { case NAND_CMD_PAGEPROG: nfc->page = -1; + vf610_nfc_transfer_size(nfc->regs, nfc->page_sz); vf610_nfc_send_commands(nfc->regs, NAND_CMD_SEQIN, command, PROGRAM_PAGE_CMD_CODE); vf610_nfc_addr_cycle(mtd, column, page); break; case NAND_CMD_RESET: + vf610_nfc_transfer_size(nfc->regs, 0); vf610_nfc_send_command(nfc->regs, command, RESET_CMD_CODE); break; /* @@ -363,14 +371,15 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, if (nfc->page == page) return; nfc->page = page; + vf610_nfc_transfer_size(nfc->regs, nfc->page_sz); vf610_nfc_send_commands(nfc->regs, NAND_CMD_READ0, NAND_CMD_READSTART, READ_PAGE_CMD_CODE); vf610_nfc_addr_cycle(mtd, column, page); break; case NAND_CMD_ERASE1: - if (nfc->page == page) - nfc->page = -1; + nfc->page = -1; + vf610_nfc_transfer_size(nfc->regs, 0); vf610_nfc_send_commands(nfc->regs, command, NAND_CMD_ERASE2, ERASE_CMD_CODE); vf610_nfc_addr_cycle(mtd, column, page); @@ -378,11 +387,13 @@ static void vf610_nfc_command(struct mtd_info *mtd, unsigned command, case NAND_CMD_READID: nfc->alt_buf = ALT_BUF_ID; + vf610_nfc_transfer_size(nfc->regs, 0); vf610_nfc_send_command(nfc->regs, command, READ_ID_CMD_CODE); break; case NAND_CMD_STATUS: nfc->alt_buf = ALT_BUF_STAT; + vf610_nfc_transfer_size(nfc->regs, 0); vf610_nfc_send_command(nfc->regs, command, STATUS_READ_CMD_CODE); break; @@ -580,7 +591,6 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr) struct nand_chip *chip; struct vf610_nfc *nfc; int err = 0; - int page_sz; struct vf610_nfc_config cfg = { .hardware_ecc = 1, #ifdef CONFIG_SYS_NAND_BUSWIDTH_16BIT @@ -634,9 +644,8 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr) chip->bbt_td = &bbt_main_descr; chip->bbt_md = &bbt_mirror_descr; - page_sz = PAGE_2K + OOB_64; - page_sz += cfg.width == 16 ? 1 : 0; - vf610_nfc_write(mtd, NFC_SECTOR_SIZE, page_sz); + nfc->page_sz = PAGE_2K + OOB_64; + nfc->page_sz += cfg.width == 16 ? 1 : 0; /* Set configuration register. */ vf610_nfc_clear(mtd, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT); @@ -665,16 +674,15 @@ static int vf610_nfc_nand_init(int devnum, void __iomem *addr) chip->ecc.mode = NAND_ECC_SOFT; /* default */ - page_sz = mtd->writesize + mtd->oobsize; + nfc->page_sz = mtd->writesize + mtd->oobsize; /* Single buffer only, max 256 OOB minus ECC status */ - if (page_sz > PAGE_2K + 256 - 8) { + if (nfc->page_sz > PAGE_2K + 256 - 8) { dev_err(nfc->dev, "Unsupported flash size\n"); err = -ENXIO; goto error; } - page_sz += cfg.width == 16 ? 1 : 0; - vf610_nfc_write(mtd, NFC_SECTOR_SIZE, page_sz); + nfc->page_sz += cfg.width == 16 ? 1 : 0; if (cfg.hardware_ecc) { if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) { diff --git a/drivers/net/Makefile b/drivers/net/Makefile index b8b0803..3ff86b7 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -46,6 +46,7 @@ obj-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o obj-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o obj-$(CONFIG_NETCONSOLE) += netconsole.o obj-$(CONFIG_NS8382X) += ns8382x.o +obj-$(CONFIG_PCH_GBE) += pch_gbe.o obj-$(CONFIG_PCNET) += pcnet.o obj-$(CONFIG_RTL8139) += rtl8139.o obj-$(CONFIG_RTL8169) += rtl8169.o diff --git a/drivers/net/e1000.h b/drivers/net/e1000.h index 6d110eb..f3b77b1 100644 --- a/drivers/net/e1000.h +++ b/drivers/net/e1000.h @@ -430,12 +430,11 @@ struct e1000_phy_stats { #define ENET_HEADER_SIZE 14 #define MAXIMUM_ETHERNET_FRAME_SIZE 1518 /* With FCS */ #define MINIMUM_ETHERNET_FRAME_SIZE 64 /* With FCS */ -#define ETHERNET_FCS_SIZE 4 #define MAXIMUM_ETHERNET_PACKET_SIZE \ - (MAXIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE) + (MAXIMUM_ETHERNET_FRAME_SIZE - ETH_FCS_LEN) #define MINIMUM_ETHERNET_PACKET_SIZE \ - (MINIMUM_ETHERNET_FRAME_SIZE - ETHERNET_FCS_SIZE) -#define CRC_LENGTH ETHERNET_FCS_SIZE + (MINIMUM_ETHERNET_FRAME_SIZE - ETH_FCS_LEN) +#define CRC_LENGTH ETH_FCS_LEN #define MAX_JUMBO_FRAME_SIZE 0x3F00 /* 802.1q VLAN Packet Sizes */ diff --git a/drivers/net/pch_gbe.c b/drivers/net/pch_gbe.c new file mode 100644 index 0000000..976848d --- /dev/null +++ b/drivers/net/pch_gbe.c @@ -0,0 +1,466 @@ +/* + * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + * + * Intel Platform Controller Hub EG20T (codename Topcliff) GMAC Driver + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <errno.h> +#include <asm/io.h> +#include <pci.h> +#include <malloc.h> +#include <miiphy.h> +#include "pch_gbe.h" + +#if !defined(CONFIG_PHYLIB) +# error "PCH Gigabit Ethernet driver requires PHYLIB - missing CONFIG_PHYLIB" +#endif + +static struct pci_device_id supported[] = { + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_GBE }, + { } +}; + +static void pch_gbe_mac_read(struct pch_gbe_regs *mac_regs, u8 *addr) +{ + u32 macid_hi, macid_lo; + + macid_hi = readl(&mac_regs->mac_adr[0].high); + macid_lo = readl(&mac_regs->mac_adr[0].low) & 0xffff; + debug("pch_gbe: macid_hi %#x macid_lo %#x\n", macid_hi, macid_lo); + + addr[0] = (u8)(macid_hi & 0xff); + addr[1] = (u8)((macid_hi >> 8) & 0xff); + addr[2] = (u8)((macid_hi >> 16) & 0xff); + addr[3] = (u8)((macid_hi >> 24) & 0xff); + addr[4] = (u8)(macid_lo & 0xff); + addr[5] = (u8)((macid_lo >> 8) & 0xff); +} + +static int pch_gbe_mac_write(struct pch_gbe_regs *mac_regs, u8 *addr) +{ + u32 macid_hi, macid_lo; + ulong start; + + macid_hi = addr[0] + (addr[1] << 8) + (addr[2] << 16) + (addr[3] << 24); + macid_lo = addr[4] + (addr[5] << 8); + + writel(macid_hi, &mac_regs->mac_adr[0].high); + writel(macid_lo, &mac_regs->mac_adr[0].low); + writel(0xfffe, &mac_regs->addr_mask); + + start = get_timer(0); + while (get_timer(start) < PCH_GBE_TIMEOUT) { + if (!(readl(&mac_regs->addr_mask) & PCH_GBE_BUSY)) + return 0; + + udelay(10); + } + + return -ETIME; +} + +static int pch_gbe_reset(struct eth_device *dev) +{ + struct pch_gbe_priv *priv = dev->priv; + struct pch_gbe_regs *mac_regs = priv->mac_regs; + ulong start; + + priv->rx_idx = 0; + priv->tx_idx = 0; + + writel(PCH_GBE_ALL_RST, &mac_regs->reset); + + /* + * Configure the MAC to RGMII mode after reset + * + * For some unknown reason, we must do the configuration here right + * after resetting the whole MAC, otherwise the reset bit in the RESET + * register will never be cleared by the hardware. And there is another + * way of having the same magic, that is to configure the MODE register + * to have the MAC work in MII/GMII mode, which is how current Linux + * pch_gbe driver does. Since anyway we need program the MAC to RGMII + * mode in the driver, we just do it here. + * + * Note: this behavior is not documented in the hardware manual. + */ + writel(PCH_GBE_RGMII_MODE_RGMII | PCH_GBE_CHIP_TYPE_INTERNAL, + &mac_regs->rgmii_ctrl); + + start = get_timer(0); + while (get_timer(start) < PCH_GBE_TIMEOUT) { + if (!(readl(&mac_regs->reset) & PCH_GBE_ALL_RST)) { + /* + * Soft reset clears hardware MAC address registers, + * so we have to reload MAC address here in order to + * make linux pch_gbe driver happy. + */ + return pch_gbe_mac_write(mac_regs, dev->enetaddr); + } + + udelay(10); + } + + debug("pch_gbe: reset timeout\n"); + return -ETIME; +} + +static void pch_gbe_rx_descs_init(struct eth_device *dev) +{ + struct pch_gbe_priv *priv = dev->priv; + struct pch_gbe_regs *mac_regs = priv->mac_regs; + struct pch_gbe_rx_desc *rx_desc = &priv->rx_desc[0]; + int i; + + memset(rx_desc, 0, sizeof(struct pch_gbe_rx_desc) * PCH_GBE_DESC_NUM); + for (i = 0; i < PCH_GBE_DESC_NUM; i++) + rx_desc->buffer_addr = pci_phys_to_mem(priv->bdf, + (u32)(priv->rx_buff[i])); + + writel(pci_phys_to_mem(priv->bdf, (u32)rx_desc), + &mac_regs->rx_dsc_base); + writel(sizeof(struct pch_gbe_rx_desc) * (PCH_GBE_DESC_NUM - 1), + &mac_regs->rx_dsc_size); + + writel(pci_phys_to_mem(priv->bdf, (u32)(rx_desc + 1)), + &mac_regs->rx_dsc_sw_p); +} + +static void pch_gbe_tx_descs_init(struct eth_device *dev) +{ + struct pch_gbe_priv *priv = dev->priv; + struct pch_gbe_regs *mac_regs = priv->mac_regs; + struct pch_gbe_tx_desc *tx_desc = &priv->tx_desc[0]; + + memset(tx_desc, 0, sizeof(struct pch_gbe_tx_desc) * PCH_GBE_DESC_NUM); + + writel(pci_phys_to_mem(priv->bdf, (u32)tx_desc), + &mac_regs->tx_dsc_base); + writel(sizeof(struct pch_gbe_tx_desc) * (PCH_GBE_DESC_NUM - 1), + &mac_regs->tx_dsc_size); + writel(pci_phys_to_mem(priv->bdf, (u32)(tx_desc + 1)), + &mac_regs->tx_dsc_sw_p); +} + +static void pch_gbe_adjust_link(struct pch_gbe_regs *mac_regs, + struct phy_device *phydev) +{ + if (!phydev->link) { + printf("%s: No link.\n", phydev->dev->name); + return; + } + + clrbits_le32(&mac_regs->rgmii_ctrl, + PCH_GBE_RGMII_RATE_2_5M | PCH_GBE_CRS_SEL); + clrbits_le32(&mac_regs->mode, + PCH_GBE_MODE_GMII_ETHER | PCH_GBE_MODE_FULL_DUPLEX); + + switch (phydev->speed) { + case 1000: + setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_125M); + setbits_le32(&mac_regs->mode, PCH_GBE_MODE_GMII_ETHER); + break; + case 100: + setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_25M); + setbits_le32(&mac_regs->mode, PCH_GBE_MODE_MII_ETHER); + break; + case 10: + setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_RGMII_RATE_2_5M); + setbits_le32(&mac_regs->mode, PCH_GBE_MODE_MII_ETHER); + break; + } + + if (phydev->duplex) { + setbits_le32(&mac_regs->rgmii_ctrl, PCH_GBE_CRS_SEL); + setbits_le32(&mac_regs->mode, PCH_GBE_MODE_FULL_DUPLEX); + } + + printf("Speed: %d, %s duplex\n", phydev->speed, + (phydev->duplex) ? "full" : "half"); + + return; +} + +static int pch_gbe_init(struct eth_device *dev, bd_t *bis) +{ + struct pch_gbe_priv *priv = dev->priv; + struct pch_gbe_regs *mac_regs = priv->mac_regs; + + if (pch_gbe_reset(dev)) + return -1; + + pch_gbe_rx_descs_init(dev); + pch_gbe_tx_descs_init(dev); + + /* Enable frame bursting */ + writel(PCH_GBE_MODE_FR_BST, &mac_regs->mode); + /* Disable TCP/IP accelerator */ + writel(PCH_GBE_RX_TCPIPACC_OFF, &mac_regs->tcpip_acc); + /* Disable RX flow control */ + writel(0, &mac_regs->rx_fctrl); + /* Configure RX/TX mode */ + writel(PCH_GBE_RH_ALM_EMP_16 | PCH_GBE_RH_ALM_FULL_16 | + PCH_GBE_RH_RD_TRG_32, &mac_regs->rx_mode); + writel(PCH_GBE_TM_TH_TX_STRT_32 | PCH_GBE_TM_TH_ALM_EMP_16 | + PCH_GBE_TM_TH_ALM_FULL_32 | PCH_GBE_TM_ST_AND_FD | + PCH_GBE_TM_SHORT_PKT, &mac_regs->tx_mode); + + /* Start up the PHY */ + if (phy_startup(priv->phydev)) { + printf("Could not initialize PHY %s\n", + priv->phydev->dev->name); + return -1; + } + + pch_gbe_adjust_link(mac_regs, priv->phydev); + + if (!priv->phydev->link) + return -1; + + /* Enable TX & RX */ + writel(PCH_GBE_RX_DMA_EN | PCH_GBE_TX_DMA_EN, &mac_regs->dma_ctrl); + writel(PCH_GBE_MRE_MAC_RX_EN, &mac_regs->mac_rx_en); + + return 0; +} + +static void pch_gbe_halt(struct eth_device *dev) +{ + struct pch_gbe_priv *priv = dev->priv; + + pch_gbe_reset(dev); + + phy_shutdown(priv->phydev); +} + +static int pch_gbe_send(struct eth_device *dev, void *packet, int length) +{ + struct pch_gbe_priv *priv = dev->priv; + struct pch_gbe_regs *mac_regs = priv->mac_regs; + struct pch_gbe_tx_desc *tx_head, *tx_desc; + u16 frame_ctrl = 0; + u32 int_st; + ulong start; + + tx_head = &priv->tx_desc[0]; + tx_desc = &priv->tx_desc[priv->tx_idx]; + + if (length < 64) + frame_ctrl |= PCH_GBE_TXD_CTRL_APAD; + + tx_desc->buffer_addr = pci_phys_to_mem(priv->bdf, (u32)packet); + tx_desc->length = length; + tx_desc->tx_words_eob = length + 3; + tx_desc->tx_frame_ctrl = frame_ctrl; + tx_desc->dma_status = 0; + tx_desc->gbec_status = 0; + + /* Test the wrap-around condition */ + if (++priv->tx_idx >= PCH_GBE_DESC_NUM) + priv->tx_idx = 0; + + writel(pci_phys_to_mem(priv->bdf, (u32)(tx_head + priv->tx_idx)), + &mac_regs->tx_dsc_sw_p); + + start = get_timer(0); + while (get_timer(start) < PCH_GBE_TIMEOUT) { + int_st = readl(&mac_regs->int_st); + if (int_st & PCH_GBE_INT_TX_CMPLT) + return 0; + + udelay(10); + } + + debug("pch_gbe: sent failed\n"); + return -ETIME; +} + +static int pch_gbe_recv(struct eth_device *dev) +{ + struct pch_gbe_priv *priv = dev->priv; + struct pch_gbe_regs *mac_regs = priv->mac_regs; + struct pch_gbe_rx_desc *rx_head, *rx_desc; + u32 hw_desc, buffer_addr, length; + int rx_swp; + + rx_head = &priv->rx_desc[0]; + rx_desc = &priv->rx_desc[priv->rx_idx]; + + readl(&mac_regs->int_st); + hw_desc = readl(&mac_regs->rx_dsc_hw_p_hld); + + /* Just return if not receiving any packet */ + if ((u32)rx_desc == hw_desc) + return 0; + + buffer_addr = pci_mem_to_phys(priv->bdf, rx_desc->buffer_addr); + length = rx_desc->rx_words_eob - 3 - ETH_FCS_LEN; + NetReceive((uchar *)buffer_addr, length); + + /* Test the wrap-around condition */ + if (++priv->rx_idx >= PCH_GBE_DESC_NUM) + priv->rx_idx = 0; + rx_swp = priv->rx_idx; + if (++rx_swp >= PCH_GBE_DESC_NUM) + rx_swp = 0; + + writel(pci_phys_to_mem(priv->bdf, (u32)(rx_head + rx_swp)), + &mac_regs->rx_dsc_sw_p); + + return length; +} + +static int pch_gbe_mdio_ready(struct pch_gbe_regs *mac_regs) +{ + ulong start = get_timer(0); + + while (get_timer(start) < PCH_GBE_TIMEOUT) { + if (readl(&mac_regs->miim) & PCH_GBE_MIIM_OPER_READY) + return 0; + + udelay(10); + } + + return -ETIME; +} + +static int pch_gbe_mdio_read(struct mii_dev *bus, int addr, int devad, int reg) +{ + struct pch_gbe_regs *mac_regs = bus->priv; + u32 miim; + + if (pch_gbe_mdio_ready(mac_regs)) + return -ETIME; + + miim = (addr << PCH_GBE_MIIM_PHY_ADDR_SHIFT) | + (reg << PCH_GBE_MIIM_REG_ADDR_SHIFT) | + PCH_GBE_MIIM_OPER_READ; + writel(miim, &mac_regs->miim); + + if (pch_gbe_mdio_ready(mac_regs)) + return -ETIME; + + return readl(&mac_regs->miim) & 0xffff; +} + +static int pch_gbe_mdio_write(struct mii_dev *bus, int addr, int devad, + int reg, u16 val) +{ + struct pch_gbe_regs *mac_regs = bus->priv; + u32 miim; + + if (pch_gbe_mdio_ready(mac_regs)) + return -ETIME; + + miim = (addr << PCH_GBE_MIIM_PHY_ADDR_SHIFT) | + (reg << PCH_GBE_MIIM_REG_ADDR_SHIFT) | + PCH_GBE_MIIM_OPER_WRITE | val; + writel(miim, &mac_regs->miim); + + if (pch_gbe_mdio_ready(mac_regs)) + return -ETIME; + else + return 0; +} + +static int pch_gbe_mdio_init(char *name, struct pch_gbe_regs *mac_regs) +{ + struct mii_dev *bus; + + bus = mdio_alloc(); + if (!bus) { + debug("pch_gbe: failed to allocate MDIO bus\n"); + return -ENOMEM; + } + + bus->read = pch_gbe_mdio_read; + bus->write = pch_gbe_mdio_write; + sprintf(bus->name, name); + + bus->priv = (void *)mac_regs; + + return mdio_register(bus); +} + +static int pch_gbe_phy_init(struct eth_device *dev) +{ + struct pch_gbe_priv *priv = dev->priv; + struct phy_device *phydev; + int mask = 0xffffffff; + + phydev = phy_find_by_mask(priv->bus, mask, priv->interface); + if (!phydev) { + printf("pch_gbe: cannot find the phy\n"); + return -1; + } + + phy_connect_dev(phydev, dev); + + phydev->supported &= PHY_GBIT_FEATURES; + phydev->advertising = phydev->supported; + + priv->phydev = phydev; + phy_config(phydev); + + return 1; +} + +int pch_gbe_register(bd_t *bis) +{ + struct eth_device *dev; + struct pch_gbe_priv *priv; + pci_dev_t devno; + u32 iobase; + + devno = pci_find_devices(supported, 0); + if (devno == -1) + return -ENODEV; + + dev = (struct eth_device *)malloc(sizeof(*dev)); + if (!dev) + return -ENOMEM; + memset(dev, 0, sizeof(*dev)); + + /* + * The priv structure contains the descriptors and frame buffers which + * need a strict buswidth alignment (64 bytes) + */ + priv = (struct pch_gbe_priv *)memalign(PCH_GBE_ALIGN_SIZE, + sizeof(*priv)); + if (!priv) { + free(dev); + return -ENOMEM; + } + memset(priv, 0, sizeof(*priv)); + + dev->priv = priv; + priv->dev = dev; + priv->bdf = devno; + + pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase); + iobase &= PCI_BASE_ADDRESS_MEM_MASK; + iobase = pci_mem_to_phys(devno, iobase); + + dev->iobase = iobase; + priv->mac_regs = (struct pch_gbe_regs *)iobase; + + sprintf(dev->name, "pch_gbe.%x", iobase); + + /* Read MAC address from SROM and initialize dev->enetaddr with it */ + pch_gbe_mac_read(priv->mac_regs, dev->enetaddr); + + dev->init = pch_gbe_init; + dev->halt = pch_gbe_halt; + dev->send = pch_gbe_send; + dev->recv = pch_gbe_recv; + + eth_register(dev); + + priv->interface = PHY_INTERFACE_MODE_RGMII; + pch_gbe_mdio_init(dev->name, priv->mac_regs); + priv->bus = miiphy_get_dev_by_name(dev->name); + + return pch_gbe_phy_init(dev); +} diff --git a/drivers/net/pch_gbe.h b/drivers/net/pch_gbe.h new file mode 100644 index 0000000..11329d4 --- /dev/null +++ b/drivers/net/pch_gbe.h @@ -0,0 +1,300 @@ +/* + * Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com> + * + * Intel Platform Controller Hub EG20T (codename Topcliff) GMAC Driver + * Adapted from linux drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _PCH_GBE_H_ +#define _PCH_GBE_H_ + +#define PCH_GBE_TIMEOUT (3 * CONFIG_SYS_HZ) + +#define PCH_GBE_DESC_NUM 4 +#define PCH_GBE_ALIGN_SIZE 64 + +/* + * Topcliff GBE MAC supports receiving ethernet frames with normal frame size + * (64-1518 bytes) as well as up to 10318 bytes, however it does not have a + * register bit to turn off receiving 'jumbo frame', so we have to allocate + * our own buffer to store the received frames instead of using U-Boot's own. + */ +#define PCH_GBE_RX_FRAME_LEN ROUND(10318, PCH_GBE_ALIGN_SIZE) + +/* Interrupt Status */ +/* Interrupt Status Hold */ +/* Interrupt Enable */ +#define PCH_GBE_INT_RX_DMA_CMPLT 0x00000001 +#define PCH_GBE_INT_RX_VALID 0x00000002 +#define PCH_GBE_INT_RX_FRAME_ERR 0x00000004 +#define PCH_GBE_INT_RX_FIFO_ERR 0x00000008 +#define PCH_GBE_INT_RX_DMA_ERR 0x00000010 +#define PCH_GBE_INT_RX_DSC_EMP 0x00000020 +#define PCH_GBE_INT_TX_CMPLT 0x00000100 +#define PCH_GBE_INT_TX_DMA_CMPLT 0x00000200 +#define PCH_GBE_INT_TX_FIFO_ERR 0x00000400 +#define PCH_GBE_INT_TX_DMA_ERR 0x00000800 +#define PCH_GBE_INT_PAUSE_CMPLT 0x00001000 +#define PCH_GBE_INT_MIIM_CMPLT 0x00010000 +#define PCH_GBE_INT_PHY_INT 0x00100000 +#define PCH_GBE_INT_WOL_DET 0x01000000 +#define PCH_GBE_INT_TCPIP_ERR 0x10000000 + +/* Mode */ +#define PCH_GBE_MODE_MII_ETHER 0x00000000 +#define PCH_GBE_MODE_GMII_ETHER 0x80000000 +#define PCH_GBE_MODE_HALF_DUPLEX 0x00000000 +#define PCH_GBE_MODE_FULL_DUPLEX 0x40000000 +#define PCH_GBE_MODE_FR_BST 0x04000000 + +/* Reset */ +#define PCH_GBE_ALL_RST 0x80000000 +#define PCH_GBE_TX_RST 0x00008000 +#define PCH_GBE_RX_RST 0x00004000 + +/* TCP/IP Accelerator Control */ +#define PCH_GBE_EX_LIST_EN 0x00000008 +#define PCH_GBE_RX_TCPIPACC_OFF 0x00000004 +#define PCH_GBE_TX_TCPIPACC_EN 0x00000002 +#define PCH_GBE_RX_TCPIPACC_EN 0x00000001 + +/* MAC RX Enable */ +#define PCH_GBE_MRE_MAC_RX_EN 0x00000001 + +/* RX Flow Control */ +#define PCH_GBE_FL_CTRL_EN 0x80000000 + +/* RX Mode */ +#define PCH_GBE_ADD_FIL_EN 0x80000000 +#define PCH_GBE_MLT_FIL_EN 0x40000000 +#define PCH_GBE_RH_ALM_EMP_4 0x00000000 +#define PCH_GBE_RH_ALM_EMP_8 0x00004000 +#define PCH_GBE_RH_ALM_EMP_16 0x00008000 +#define PCH_GBE_RH_ALM_EMP_32 0x0000c000 +#define PCH_GBE_RH_ALM_FULL_4 0x00000000 +#define PCH_GBE_RH_ALM_FULL_8 0x00001000 +#define PCH_GBE_RH_ALM_FULL_16 0x00002000 +#define PCH_GBE_RH_ALM_FULL_32 0x00003000 +#define PCH_GBE_RH_RD_TRG_4 0x00000000 +#define PCH_GBE_RH_RD_TRG_8 0x00000200 +#define PCH_GBE_RH_RD_TRG_16 0x00000400 +#define PCH_GBE_RH_RD_TRG_32 0x00000600 +#define PCH_GBE_RH_RD_TRG_64 0x00000800 +#define PCH_GBE_RH_RD_TRG_128 0x00000a00 +#define PCH_GBE_RH_RD_TRG_256 0x00000c00 +#define PCH_GBE_RH_RD_TRG_512 0x00000e00 + +/* TX Mode */ +#define PCH_GBE_TM_NO_RTRY 0x80000000 +#define PCH_GBE_TM_LONG_PKT 0x40000000 +#define PCH_GBE_TM_ST_AND_FD 0x20000000 +#define PCH_GBE_TM_SHORT_PKT 0x10000000 +#define PCH_GBE_TM_LTCOL_RETX 0x08000000 +#define PCH_GBE_TM_TH_TX_STRT_4 0x00000000 +#define PCH_GBE_TM_TH_TX_STRT_8 0x00004000 +#define PCH_GBE_TM_TH_TX_STRT_16 0x00008000 +#define PCH_GBE_TM_TH_TX_STRT_32 0x0000c000 +#define PCH_GBE_TM_TH_ALM_EMP_4 0x00000000 +#define PCH_GBE_TM_TH_ALM_EMP_8 0x00000800 +#define PCH_GBE_TM_TH_ALM_EMP_16 0x00001000 +#define PCH_GBE_TM_TH_ALM_EMP_32 0x00001800 +#define PCH_GBE_TM_TH_ALM_EMP_64 0x00002000 +#define PCH_GBE_TM_TH_ALM_EMP_128 0x00002800 +#define PCH_GBE_TM_TH_ALM_EMP_256 0x00003000 +#define PCH_GBE_TM_TH_ALM_EMP_512 0x00003800 +#define PCH_GBE_TM_TH_ALM_FULL_4 0x00000000 +#define PCH_GBE_TM_TH_ALM_FULL_8 0x00000200 +#define PCH_GBE_TM_TH_ALM_FULL_16 0x00000400 +#define PCH_GBE_TM_TH_ALM_FULL_32 0x00000600 + +/* MAC Address Mask */ +#define PCH_GBE_BUSY 0x80000000 + +/* MIIM */ +#define PCH_GBE_MIIM_OPER_WRITE 0x04000000 +#define PCH_GBE_MIIM_OPER_READ 0x00000000 +#define PCH_GBE_MIIM_OPER_READY 0x04000000 +#define PCH_GBE_MIIM_PHY_ADDR_SHIFT 21 +#define PCH_GBE_MIIM_REG_ADDR_SHIFT 16 + +/* RGMII Control */ +#define PCH_GBE_CRS_SEL 0x00000010 +#define PCH_GBE_RGMII_RATE_125M 0x00000000 +#define PCH_GBE_RGMII_RATE_25M 0x00000008 +#define PCH_GBE_RGMII_RATE_2_5M 0x0000000c +#define PCH_GBE_RGMII_MODE_GMII 0x00000000 +#define PCH_GBE_RGMII_MODE_RGMII 0x00000002 +#define PCH_GBE_CHIP_TYPE_EXTERNAL 0x00000000 +#define PCH_GBE_CHIP_TYPE_INTERNAL 0x00000001 + +/* DMA Control */ +#define PCH_GBE_RX_DMA_EN 0x00000002 +#define PCH_GBE_TX_DMA_EN 0x00000001 + +/* Receive Descriptor bit definitions */ +#define PCH_GBE_RXD_ACC_STAT_BCAST 0x00000400 +#define PCH_GBE_RXD_ACC_STAT_MCAST 0x00000200 +#define PCH_GBE_RXD_ACC_STAT_UCAST 0x00000100 +#define PCH_GBE_RXD_ACC_STAT_TCPIPOK 0x000000c0 +#define PCH_GBE_RXD_ACC_STAT_IPOK 0x00000080 +#define PCH_GBE_RXD_ACC_STAT_TCPOK 0x00000040 +#define PCH_GBE_RXD_ACC_STAT_IP6ERR 0x00000020 +#define PCH_GBE_RXD_ACC_STAT_OFLIST 0x00000010 +#define PCH_GBE_RXD_ACC_STAT_TYPEIP 0x00000008 +#define PCH_GBE_RXD_ACC_STAT_MACL 0x00000004 +#define PCH_GBE_RXD_ACC_STAT_PPPOE 0x00000002 +#define PCH_GBE_RXD_ACC_STAT_VTAGT 0x00000001 +#define PCH_GBE_RXD_GMAC_STAT_PAUSE 0x0200 +#define PCH_GBE_RXD_GMAC_STAT_MARBR 0x0100 +#define PCH_GBE_RXD_GMAC_STAT_MARMLT 0x0080 +#define PCH_GBE_RXD_GMAC_STAT_MARIND 0x0040 +#define PCH_GBE_RXD_GMAC_STAT_MARNOTMT 0x0020 +#define PCH_GBE_RXD_GMAC_STAT_TLONG 0x0010 +#define PCH_GBE_RXD_GMAC_STAT_TSHRT 0x0008 +#define PCH_GBE_RXD_GMAC_STAT_NOTOCTAL 0x0004 +#define PCH_GBE_RXD_GMAC_STAT_NBLERR 0x0002 +#define PCH_GBE_RXD_GMAC_STAT_CRCERR 0x0001 + +/* Transmit Descriptor bit definitions */ +#define PCH_GBE_TXD_CTRL_TCPIP_ACC_OFF 0x0008 +#define PCH_GBE_TXD_CTRL_ITAG 0x0004 +#define PCH_GBE_TXD_CTRL_ICRC 0x0002 +#define PCH_GBE_TXD_CTRL_APAD 0x0001 +#define PCH_GBE_TXD_WORDS_SHIFT 2 +#define PCH_GBE_TXD_GMAC_STAT_CMPLT 0x2000 +#define PCH_GBE_TXD_GMAC_STAT_ABT 0x1000 +#define PCH_GBE_TXD_GMAC_STAT_EXCOL 0x0800 +#define PCH_GBE_TXD_GMAC_STAT_SNGCOL 0x0400 +#define PCH_GBE_TXD_GMAC_STAT_MLTCOL 0x0200 +#define PCH_GBE_TXD_GMAC_STAT_CRSER 0x0100 +#define PCH_GBE_TXD_GMAC_STAT_TLNG 0x0080 +#define PCH_GBE_TXD_GMAC_STAT_TSHRT 0x0040 +#define PCH_GBE_TXD_GMAC_STAT_LTCOL 0x0020 +#define PCH_GBE_TXD_GMAC_STAT_TFUNDFLW 0x0010 + +/** + * struct pch_gbe_rx_desc - Receive Descriptor + * @buffer_addr: RX Frame Buffer Address + * @tcp_ip_status: TCP/IP Accelerator Status + * @rx_words_eob: RX word count and Byte position + * @gbec_status: GMAC Status + * @dma_status: DMA Status + * @reserved1: Reserved + * @reserved2: Reserved + */ +struct pch_gbe_rx_desc { + u32 buffer_addr; + u32 tcp_ip_status; + u16 rx_words_eob; + u16 gbec_status; + u8 dma_status; + u8 reserved1; + u16 reserved2; +}; + +/** + * struct pch_gbe_tx_desc - Transmit Descriptor + * @buffer_addr: TX Frame Buffer Address + * @length: Data buffer length + * @reserved1: Reserved + * @tx_words_eob: TX word count and Byte position + * @tx_frame_ctrl: TX Frame Control + * @dma_status: DMA Status + * @reserved2: Reserved + * @gbec_status: GMAC Status + */ +struct pch_gbe_tx_desc { + u32 buffer_addr; + u16 length; + u16 reserved1; + u16 tx_words_eob; + u16 tx_frame_ctrl; + u8 dma_status; + u8 reserved2; + u16 gbec_status; +}; + +/** + * pch_gbe_regs_mac_adr - structure holding values of mac address registers + * + * @high Denotes the 1st to 4th byte from the initial of MAC address + * @low Denotes the 5th to 6th byte from the initial of MAC address + */ +struct pch_gbe_regs_mac_adr { + u32 high; + u32 low; +}; + +/** + * pch_gbe_regs - structure holding values of MAC registers + */ +struct pch_gbe_regs { + u32 int_st; + u32 int_en; + u32 mode; + u32 reset; + u32 tcpip_acc; + u32 ex_list; + u32 int_st_hold; + u32 phy_int_ctrl; + u32 mac_rx_en; + u32 rx_fctrl; + u32 pause_req; + u32 rx_mode; + u32 tx_mode; + u32 rx_fifo_st; + u32 tx_fifo_st; + u32 tx_fid; + u32 tx_result; + u32 pause_pkt1; + u32 pause_pkt2; + u32 pause_pkt3; + u32 pause_pkt4; + u32 pause_pkt5; + u32 reserve[2]; + struct pch_gbe_regs_mac_adr mac_adr[16]; + u32 addr_mask; + u32 miim; + u32 mac_addr_load; + u32 rgmii_st; + u32 rgmii_ctrl; + u32 reserve3[3]; + u32 dma_ctrl; + u32 reserve4[3]; + u32 rx_dsc_base; + u32 rx_dsc_size; + u32 rx_dsc_hw_p; + u32 rx_dsc_hw_p_hld; + u32 rx_dsc_sw_p; + u32 reserve5[3]; + u32 tx_dsc_base; + u32 tx_dsc_size; + u32 tx_dsc_hw_p; + u32 tx_dsc_hw_p_hld; + u32 tx_dsc_sw_p; + u32 reserve6[3]; + u32 rx_dma_st; + u32 tx_dma_st; + u32 reserve7[2]; + u32 wol_st; + u32 wol_ctrl; + u32 wol_addr_mask; +}; + +struct pch_gbe_priv { + struct pch_gbe_rx_desc rx_desc[PCH_GBE_DESC_NUM]; + struct pch_gbe_tx_desc tx_desc[PCH_GBE_DESC_NUM]; + char rx_buff[PCH_GBE_DESC_NUM][PCH_GBE_RX_FRAME_LEN]; + struct eth_device *dev; + struct phy_device *phydev; + struct mii_dev *bus; + struct pch_gbe_regs *mac_regs; + pci_dev_t bdf; + u32 interface; + int rx_idx; + int tx_idx; +}; + +#endif /* _PCH_GBE_H_ */ diff --git a/drivers/power/axp209.c b/drivers/power/axp209.c index 4565398..f8c9b77 100644 --- a/drivers/power/axp209.c +++ b/drivers/power/axp209.c @@ -119,7 +119,7 @@ int axp209_set_ldo3(int mvolt) if (mvolt == -1) cfg = 0x80; /* determined by LDO3IN pin */ else - cfg = axp209_mvolt_to_cfg(mvolt, 700, 2275, 25); + cfg = axp209_mvolt_to_cfg(mvolt, 700, 3500, 25); return axp209_write(AXP209_LDO3_VOLTAGE, cfg); } diff --git a/drivers/serial/serial-uclass.c b/drivers/serial/serial-uclass.c index 3fc7104..2de3737 100644 --- a/drivers/serial/serial-uclass.c +++ b/drivers/serial/serial-uclass.c @@ -16,8 +16,6 @@ #include <dm/lists.h> #include <dm/device-internal.h> -#include <ns16550.h> - DECLARE_GLOBAL_DATA_PTR; /* diff --git a/drivers/spi/cf_qspi.c b/drivers/spi/cf_qspi.c index 6b85633..834c5bd 100644 --- a/drivers/spi/cf_qspi.c +++ b/drivers/spi/cf_qspi.c @@ -20,7 +20,7 @@ DECLARE_GLOBAL_DATA_PTR; #define clamp(x, low, high) (min(max(low, x), high)) -#define to_cf_qspi_slave(s) container_of(s, struct cf_qspi_slave, s) +#define to_cf_qspi_slave(s) container_of(s, struct cf_qspi_slave, slave) struct cf_qspi_slave { struct spi_slave slave; /* Specific bus:cs ID for each device */ diff --git a/drivers/spi/cf_spi.c b/drivers/spi/cf_spi.c index 879a809..6ce1101 100644 --- a/drivers/spi/cf_spi.c +++ b/drivers/spi/cf_spi.c @@ -20,13 +20,6 @@ struct cf_spi_slave { int charbit; }; -int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, - void *din, ulong flags); -struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave, uint mode); -void cfspi_init(void); -void cfspi_tx(u32 ctrl, u16 data); -u16 cfspi_rx(void); - extern void cfspi_port_conf(void); extern int cfspi_claim_bus(uint bus, uint cs); extern void cfspi_release_bus(uint bus, uint cs); @@ -46,7 +39,12 @@ DECLARE_GLOBAL_DATA_PTR; #define SPI_MODE_MOD 0x00200000 #define SPI_DBLRATE 0x00100000 -void cfspi_init(void) +static inline struct cf_spi_slave *to_cf_spi_slave(struct spi_slave *slave) +{ + return container_of(slave, struct cf_spi_slave, slave); +} + +static void cfspi_init(void) { volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; @@ -84,7 +82,7 @@ void cfspi_init(void) #endif } -void cfspi_tx(u32 ctrl, u16 data) +static void cfspi_tx(u32 ctrl, u16 data) { volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; @@ -93,7 +91,7 @@ void cfspi_tx(u32 ctrl, u16 data) dspi->tfr = (ctrl | data); } -u16 cfspi_rx(void) +static u16 cfspi_rx(void) { volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI; @@ -102,10 +100,10 @@ u16 cfspi_rx(void) return (dspi->rfr & 0xFFFF); } -int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, - void *din, ulong flags) +static int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, + void *din, ulong flags) { - struct cf_spi_slave *cfslave = (struct cf_spi_slave *)slave; + struct cf_spi_slave *cfslave = to_cf_spi_slave(slave); u16 *spi_rd16 = NULL, *spi_wr16 = NULL; u8 *spi_rd = NULL, *spi_wr = NULL; static u32 ctrl = 0; @@ -176,7 +174,8 @@ int cfspi_xfer(struct spi_slave *slave, uint bitlen, const void *dout, return 0; } -struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave, uint mode) +static struct spi_slave *cfspi_setup_slave(struct cf_spi_slave *cfslave, + uint mode) { /* * bit definition for mode: @@ -326,7 +325,9 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, void spi_free_slave(struct spi_slave *slave) { - free(slave); + struct cf_spi_slave *cfslave = to_cf_spi_slave(slave); + + free(cfslave); } int spi_claim_bus(struct spi_slave *slave) diff --git a/drivers/spi/davinci_spi.c b/drivers/spi/davinci_spi.c index 0ec5b9d..bf18362 100644 --- a/drivers/spi/davinci_spi.c +++ b/drivers/spi/davinci_spi.c @@ -32,9 +32,6 @@ struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs, if (!ds) return NULL; - ds->slave.bus = bus; - ds->slave.cs = cs; - switch (bus) { case SPI0_BUS: ds->regs = (struct davinci_spi_regs *)SPI0_BASE; diff --git a/drivers/spi/designware_spi.c b/drivers/spi/designware_spi.c index 2624844..8f5c0fc 100644 --- a/drivers/spi/designware_spi.c +++ b/drivers/spi/designware_spi.c @@ -164,13 +164,13 @@ static void spi_hw_init(struct dw_spi_priv *priv) if (!priv->fifo_len) { u32 fifo; - for (fifo = 2; fifo <= 256; fifo++) { + for (fifo = 1; fifo < 256; fifo++) { dw_writew(priv, DW_SPI_TXFLTR, fifo); if (fifo != dw_readw(priv, DW_SPI_TXFLTR)) break; } - priv->fifo_len = (fifo == 2) ? 0 : fifo - 1; + priv->fifo_len = (fifo == 1) ? 0 : fifo; dw_writew(priv, DW_SPI_TXFLTR, 0); } debug("%s: fifo_len=%d\n", __func__, priv->fifo_len); diff --git a/drivers/spi/ftssp010_spi.c b/drivers/spi/ftssp010_spi.c index 267e4d8..c7d6480 100644 --- a/drivers/spi/ftssp010_spi.c +++ b/drivers/spi/ftssp010_spi.c @@ -431,7 +431,9 @@ free_out: void spi_free_slave(struct spi_slave *slave) { - free(slave); + struct ftssp010_spi *chip = to_ftssp010_spi(slave); + + free(chip); } int spi_claim_bus(struct spi_slave *slave) diff --git a/drivers/spi/ti_qspi.c b/drivers/spi/ti_qspi.c index 857b604..3356c0f 100644 --- a/drivers/spi/ti_qspi.c +++ b/drivers/spi/ti_qspi.c @@ -109,10 +109,17 @@ static void ti_spi_setup_spi_register(struct ti_qspi_slave *qslave) slave->op_mode_rx = 8; #endif +#ifdef CONFIG_QSPI_QUAD_SUPPORT + memval |= (QSPI_CMD_READ_QUAD | QSPI_SETUP0_NUM_A_BYTES | + QSPI_SETUP0_NUM_D_BYTES_8_BITS | + QSPI_SETUP0_READ_QUAD | QSPI_CMD_WRITE | + QSPI_NUM_DUMMY_BITS); +#else memval |= QSPI_CMD_READ | QSPI_SETUP0_NUM_A_BYTES | QSPI_SETUP0_NUM_D_BYTES_NO_BITS | QSPI_SETUP0_READ_NORMAL | QSPI_CMD_WRITE | QSPI_NUM_DUMMY_BITS; +#endif writel(memval, &qslave->base->setup0); } diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index ba442d5..8f03a6b 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -68,7 +68,6 @@ unsigned packet_received, packet_sent; #define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ #define ETH_DATA_LEN 1500 /* Max. octets in payload */ #define ETH_FRAME_LEN PKTSIZE_ALIGN /* Max. octets in frame sans FCS */ -#define ETH_FCS_LEN 4 /* Octets in the FCS */ #define DRIVER_DESC "Ethernet Gadget" /* Based on linux 2.6.27 version */ diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index 404a7b9..62c9b2e 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -43,7 +43,6 @@ #define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ #define ETH_DATA_LEN 1500 /* Max. octets in payload */ #define ETH_FRAME_LEN PKTSIZE_ALIGN /* Max. octets in frame sans FCS */ -#define ETH_FCS_LEN 4 /* Octets in the FCS */ #define ENOTSUPP 524 /* Operation is not supported */ diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c index 6e58ddf..51fb3fd 100644 --- a/drivers/usb/musb-new/musb_uboot.c +++ b/drivers/usb/musb-new/musb_uboot.c @@ -1,5 +1,8 @@ #include <common.h> #include <watchdog.h> +#ifdef CONFIG_ARCH_SUNXI +#include <asm/arch/usbc.h> +#endif #include <asm/errno.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> @@ -186,8 +189,19 @@ void usb_reset_root_port(void) power &= 0xf0; musb_writeb(mbase, MUSB_POWER, MUSB_POWER_RESET | power); mdelay(50); +#ifdef CONFIG_ARCH_SUNXI + /* + * sunxi phy has a bug and it will wrongly detect high speed squelch + * when clearing reset on low-speed devices, temporary disable + * squelch detection to work around this. + */ + sunxi_usbc_enable_squelch_detect(0, 0); +#endif power = musb_readb(mbase, MUSB_POWER); musb_writeb(mbase, MUSB_POWER, ~MUSB_POWER_RESET & power); +#ifdef CONFIG_ARCH_SUNXI + sunxi_usbc_enable_squelch_detect(0, 1); +#endif host->isr(0, host); host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ? USB_SPEED_HIGH : diff --git a/drivers/watchdog/imx_watchdog.c b/drivers/watchdog/imx_watchdog.c index d5993b4..1d18d4b 100644 --- a/drivers/watchdog/imx_watchdog.c +++ b/drivers/watchdog/imx_watchdog.c @@ -20,7 +20,6 @@ struct watchdog_regs { #define WCR_WDE 0x04 /* WDOG enable */ #define WCR_WDT 0x08 #define WCR_SRS 0x10 -#define WCR_WDW 0x80 #define SET_WCR_WT(x) (x << 8) #ifdef CONFIG_IMX_WATCHDOG @@ -47,7 +46,7 @@ void hw_watchdog_init(void) #endif timeout = (CONFIG_WATCHDOG_TIMEOUT_MSECS / 500) - 1; writew(WCR_WDZST | WCR_WDBG | WCR_WDE | WCR_WDT | WCR_SRS | - WCR_WDW | SET_WCR_WT(timeout), &wdog->wcr); + SET_WCR_WT(timeout), &wdog->wcr); hw_watchdog_reset(); } #endif diff --git a/include/config_distro_defaults.h b/include/config_distro_defaults.h index 1ecc0bb..8237239 100644 --- a/include/config_distro_defaults.h +++ b/include/config_distro_defaults.h @@ -20,10 +20,12 @@ #define CONFIG_BOOTP_PXE #define CONFIG_BOOTP_SUBNETMASK -#if defined(__arm__) +#if defined(__arm__) || defined(__aarch64__) #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100 #if defined(__ARM_ARCH_7__) || defined(__ARM_ARCH_7A__) #define CONFIG_BOOTP_VCI_STRING "U-boot.armv7" +#elif defined(__aarch64__) +#define CONFIG_BOOTP_VCI_STRING "U-boot.armv8" #else #define CONFIG_BOOTP_VCI_STRING "U-boot.arm" #endif @@ -31,7 +33,11 @@ #define CONFIG_OF_LIBFDT +#ifdef CONFIG_ARM64 +#define CONFIG_CMD_BOOTI +#else #define CONFIG_CMD_BOOTZ +#endif #define CONFIG_CMD_DHCP #define CONFIG_CMD_ELF #define CONFIG_CMD_EXT2 diff --git a/include/configs/B4860QDS.h b/include/configs/B4860QDS.h index 838a0b1..dca1ca5 100644 --- a/include/configs/B4860QDS.h +++ b/include/configs/B4860QDS.h @@ -391,7 +391,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/BSC9131RDB.h b/include/configs/BSC9131RDB.h index 6aaaaa4..047ed8b 100644 --- a/include/configs/BSC9131RDB.h +++ b/include/configs/BSC9131RDB.h @@ -198,7 +198,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/BSC9132QDS.h b/include/configs/BSC9132QDS.h index 59a8d1b..ceee0e4 100644 --- a/include/configs/BSC9132QDS.h +++ b/include/configs/BSC9132QDS.h @@ -320,7 +320,6 @@ combinations. this should be removed later /* NAND */ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/C29XPCIE.h b/include/configs/C29XPCIE.h index e24b923..7c45c36 100644 --- a/include/configs/C29XPCIE.h +++ b/include/configs/C29XPCIE.h @@ -234,7 +234,6 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (1024 * 1024) diff --git a/include/configs/M5208EVBE.h b/include/configs/M5208EVBE.h index 6630377..9390464 100644 --- a/include/configs/M5208EVBE.h +++ b/include/configs/M5208EVBE.h @@ -14,9 +14,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF520x /* define processor family */ -#define CONFIG_M5208 /* define processor type */ - #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) #define CONFIG_BAUDRATE 115200 diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h index cde7305..e9424b4 100644 --- a/include/configs/M52277EVB.h +++ b/include/configs/M52277EVB.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF5227x /* define processor family */ -#define CONFIG_M52277 /* define processor type */ #define CONFIG_M52277EVB /* M52277EVB board */ #define CONFIG_MCFUART diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h index 0f6e2f7..883347b 100644 --- a/include/configs/M5235EVB.h +++ b/include/configs/M5235EVB.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF523x /* define processor family */ -#define CONFIG_M5235 /* define processor type */ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h index ae4fe45..60e5b45 100644 --- a/include/configs/M5249EVB.h +++ b/include/configs/M5249EVB.h @@ -18,9 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5249 /* define processor type */ - #define CONFIG_MCFTMR #define CONFIG_MCFUART diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 3a1cbca..7421b57 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -7,8 +7,6 @@ #ifndef _M5253DEMO_H #define _M5253DEMO_H -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5253 /* define processor type */ #define CONFIG_M5253DEMO /* define board type */ #define CONFIG_MCFTMR diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h index fabfdb9..8fd3907 100644 --- a/include/configs/M5253EVBE.h +++ b/include/configs/M5253EVBE.h @@ -8,8 +8,6 @@ #ifndef _M5253EVBE_H #define _M5253EVBE_H -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5253 /* define processor type */ #define CONFIG_M5253EVBE /* define board type */ #define CONFIG_MCFTMR diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h index 4c84126..2c056b1 100644 --- a/include/configs/M5272C3.h +++ b/include/configs/M5272C3.h @@ -17,9 +17,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5272 /* define processor type */ - #define CONFIG_MCFTMR #define CONFIG_MCFUART diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h index 4dddab7..7eb3172 100644 --- a/include/configs/M5275EVB.h +++ b/include/configs/M5275EVB.h @@ -21,8 +21,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5275 /* define processor type */ #define CONFIG_M5275EVB /* define board type */ #define CONFIG_MCFTMR diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h index fd970d0..569ad42 100644 --- a/include/configs/M5282EVB.h +++ b/include/configs/M5282EVB.h @@ -17,9 +17,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5282 /* define processor type */ - #define CONFIG_MCFTMR #define CONFIG_MCFUART diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h index a100d9f..e3fa856 100644 --- a/include/configs/M53017EVB.h +++ b/include/configs/M53017EVB.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF5301x /* define processor family */ -#define CONFIG_M53015 /* define processor type */ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) @@ -202,7 +200,7 @@ /* Configuration for environment * Environment is embedded in u-boot in the second sector of the flash */ -#define CONFIG_ENV_OFFSET 0x8000 +#define CONFIG_ENV_OFFSET (CONFIG_SYS_FLASH_BASE + 0x40000) #define CONFIG_ENV_SIZE 0x1000 #define CONFIG_ENV_SECT_SIZE 0x8000 #define CONFIG_ENV_IS_IN_FLASH 1 diff --git a/include/configs/M5329EVB.h b/include/configs/M5329EVB.h index 78ea384..795f359 100644 --- a/include/configs/M5329EVB.h +++ b/include/configs/M5329EVB.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF532x /* define processor family */ -#define CONFIG_M5329 /* define processor type */ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) diff --git a/include/configs/M5373EVB.h b/include/configs/M5373EVB.h index 849c265..d75b43c 100644 --- a/include/configs/M5373EVB.h +++ b/include/configs/M5373EVB.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF532x /* define processor family */ -#define CONFIG_M5373 /* define processor type */ #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT (0) diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h index 3d7dc1f..3a6e981 100644 --- a/include/configs/M54418TWR.h +++ b/include/configs/M54418TWR.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF5441x /* define processor family */ -#define CONFIG_M54418 /* define processor type */ #define CONFIG_M54418TWR /* M54418TWR board */ #define CONFIG_MCFUART @@ -55,7 +53,6 @@ #define CONFIG_CMD_MISC #define CONFIG_CMD_MII #undef CONFIG_CMD_NAND -#undef CONFIG_CMD_NAND_YAFFS #define CONFIG_CMD_NET #define CONFIG_CMD_NFS #define CONFIG_CMD_PING diff --git a/include/configs/M54451EVB.h b/include/configs/M54451EVB.h index 734a77f..1b3598a 100644 --- a/include/configs/M54451EVB.h +++ b/include/configs/M54451EVB.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF5445x /* define processor family */ -#define CONFIG_M54451 /* define processor type */ #define CONFIG_M54451EVB /* M54451EVB board */ #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/M54455EVB.h b/include/configs/M54455EVB.h index 2faf581..2288bff 100644 --- a/include/configs/M54455EVB.h +++ b/include/configs/M54455EVB.h @@ -18,8 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF5445x /* define processor family */ -#define CONFIG_M54455 /* define processor type */ #define CONFIG_M54455EVB /* M54455EVB board */ #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/M5475EVB.h b/include/configs/M5475EVB.h index 2f4549f..91d6a1a 100644 --- a/include/configs/M5475EVB.h +++ b/include/configs/M5475EVB.h @@ -18,9 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF547x_8x /* define processor family */ -#define CONFIG_M547x /* define processor type */ -#define CONFIG_M5475 /* define processor type */ #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/M5485EVB.h b/include/configs/M5485EVB.h index 9aa02f7..ce9f3b0 100644 --- a/include/configs/M5485EVB.h +++ b/include/configs/M5485EVB.h @@ -18,9 +18,6 @@ * High Level Configuration Options * (easy to change) */ -#define CONFIG_MCF547x_8x /* define processor family */ -#define CONFIG_M548x /* define processor type */ -#define CONFIG_M5485 /* define processor type */ #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h index d9a19c3..9cea76a 100644 --- a/include/configs/MPC8313ERDB.h +++ b/include/configs/MPC8313ERDB.h @@ -272,7 +272,6 @@ "mtdparts=e2800000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)" #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 diff --git a/include/configs/MPC8315ERDB.h b/include/configs/MPC8315ERDB.h index 1384f36..fbf38c8 100644 --- a/include/configs/MPC8315ERDB.h +++ b/include/configs/MPC8315ERDB.h @@ -245,7 +245,6 @@ "mtdparts=e0600000.flash:512k(uboot),128k(env),3m@1m(kernel),-(fs)" #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 diff --git a/include/configs/MPC837XEMDS.h b/include/configs/MPC837XEMDS.h index 85f5c40..521904d 100644 --- a/include/configs/MPC837XEMDS.h +++ b/include/configs/MPC837XEMDS.h @@ -283,7 +283,6 @@ * NAND Flash on the Local Bus */ #define CONFIG_CMD_NAND 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_NAND_FSL_ELBC 1 diff --git a/include/configs/MPC8536DS.h b/include/configs/MPC8536DS.h index 2722164..dc09b1f 100644 --- a/include/configs/MPC8536DS.h +++ b/include/configs/MPC8536DS.h @@ -308,7 +308,6 @@ CONFIG_SYS_NAND_BASE + 0x80000, \ CONFIG_SYS_NAND_BASE + 0xC0000} #define CONFIG_SYS_MAX_NAND_DEVICE 4 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index 4da247c..e624c71 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -194,7 +194,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE 1 #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h index 0b07876..5e7bc49 100644 --- a/include/configs/MPC8572DS.h +++ b/include/configs/MPC8572DS.h @@ -303,7 +303,6 @@ CONFIG_SYS_NAND_BASE + 0x80000,\ CONFIG_SYS_NAND_BASE + 0xC0000} #define CONFIG_SYS_MAX_NAND_DEVICE 4 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/P1010RDB.h b/include/configs/P1010RDB.h index cd6a39c..ccf3ce3 100644 --- a/include/configs/P1010RDB.h +++ b/include/configs/P1010RDB.h @@ -444,7 +444,6 @@ extern unsigned long get_sdram_size(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #if defined(CONFIG_P1010RDB_PA) diff --git a/include/configs/P1022DS.h b/include/configs/P1022DS.h index 4371110..795e3b5 100644 --- a/include/configs/P1022DS.h +++ b/include/configs/P1022DS.h @@ -290,7 +290,6 @@ #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024) #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE diff --git a/include/configs/P1023RDB.h b/include/configs/P1023RDB.h index a8b7817..d65c461 100644 --- a/include/configs/P1023RDB.h +++ b/include/configs/P1023RDB.h @@ -136,7 +136,6 @@ extern unsigned long get_clock_freq(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_NAND_FSL_ELBC #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/P2041RDB.h b/include/configs/P2041RDB.h index d8d30bb..f99da65 100644 --- a/include/configs/P2041RDB.h +++ b/include/configs/P2041RDB.h @@ -251,7 +251,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T102xQDS.h b/include/configs/T102xQDS.h index 3f02ced..2927043 100644 --- a/include/configs/T102xQDS.h +++ b/include/configs/T102xQDS.h @@ -398,7 +398,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T102xRDB.h b/include/configs/T102xRDB.h index bd40d6a..84e8336 100644 --- a/include/configs/T102xRDB.h +++ b/include/configs/T102xRDB.h @@ -379,7 +379,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) diff --git a/include/configs/T1040QDS.h b/include/configs/T1040QDS.h index 92f5f56..faf8c9d 100644 --- a/include/configs/T1040QDS.h +++ b/include/configs/T1040QDS.h @@ -308,7 +308,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T104xRDB.h b/include/configs/T104xRDB.h index 5263318..6cc95ef 100644 --- a/include/configs/T104xRDB.h +++ b/include/configs/T104xRDB.h @@ -341,7 +341,6 @@ #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h index ff6d2c1..046aa48 100644 --- a/include/configs/T208xQDS.h +++ b/include/configs/T208xQDS.h @@ -357,7 +357,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T208xRDB.h b/include/configs/T208xRDB.h index db6b42e..faaf22c 100644 --- a/include/configs/T208xRDB.h +++ b/include/configs/T208xRDB.h @@ -328,7 +328,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) diff --git a/include/configs/T4240QDS.h b/include/configs/T4240QDS.h index dd7d52f..cfe6557 100644 --- a/include/configs/T4240QDS.h +++ b/include/configs/T4240QDS.h @@ -281,7 +281,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/T4240RDB.h b/include/configs/T4240RDB.h index b644a6c..c1ad35a 100644 --- a/include/configs/T4240RDB.h +++ b/include/configs/T4240RDB.h @@ -467,7 +467,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_DDR_LAW 11 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h index 94078f5..6aee6db 100644 --- a/include/configs/VCMA9.h +++ b/include/configs/VCMA9.h @@ -62,7 +62,6 @@ #define CONFIG_CMD_PING #define CONFIG_CMD_BSP #define CONFIG_CMD_NAND -#define CONFIG_CMD_NAND_YAFFS #define CONFIG_BOARD_LATE_INIT diff --git a/include/configs/amcc-common.h b/include/configs/amcc-common.h index 73e1b0a..d5b6e37 100644 --- a/include/configs/amcc-common.h +++ b/include/configs/amcc-common.h @@ -10,6 +10,8 @@ #ifndef __AMCC_COMMON_H #define __AMCC_COMMON_H +#define CONFIG_SYS_GENERIC_BOARD + #define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */ #define CONFIG_SYS_MONITOR_LEN (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1) diff --git a/include/configs/amcore.h b/include/configs/amcore.h index 2a785b3..229fa5a 100644 --- a/include/configs/amcore.h +++ b/include/configs/amcore.h @@ -12,11 +12,6 @@ #define CONFIG_AMCORE #define CONFIG_HOSTNAME AMCORE -#define CONFIG_SYS_GENERIC_BOARD - -#define CONFIG_MCF530x -#define CONFIG_M5307 - #define CONFIG_MCFTMR #define CONFIG_MCFUART #define CONFIG_SYS_UART_PORT 0 diff --git a/include/configs/astro_mcf5373l.h b/include/configs/astro_mcf5373l.h index fa64a68..de837cf 100644 --- a/include/configs/astro_mcf5373l.h +++ b/include/configs/astro_mcf5373l.h @@ -39,16 +39,6 @@ #error No card type defined! #endif -/* - * Define processor - * possible values for Urmel board: only Coldfire M5373 processor supported - * (please do not change) - */ - -/* it seems not clear yet which processor defines we should use */ -#define CONFIG_MCF537x /* define processor family */ -#define CONFIG_MCF532x /* define processor family */ -#define CONFIG_M5373 /* define processor type */ #define CONFIG_ASTRO5373L /* define board type */ /* Command line configuration */ diff --git a/include/configs/at91-sama5_common.h b/include/configs/at91-sama5_common.h new file mode 100644 index 0000000..dedb785 --- /dev/null +++ b/include/configs/at91-sama5_common.h @@ -0,0 +1,87 @@ +/* + * Common part of configuration settings for the AT91 SAMA5 board. + * + * Copyright (C) 2015 Atmel Corporation + * Josh Wu <josh.wu@atmel.com> + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __AT91_SAMA5_COMMON_H +#define __AT91_SAMA5_COMMON_H + +#include <asm/hardware.h> + +#define CONFIG_SYS_TEXT_BASE 0x26f00000 + +/* ARM asynchronous clock */ +#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 +#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ + +#define CONFIG_ARCH_CPU_INIT + +#ifndef CONFIG_SPL_BUILD +#define CONFIG_SKIP_LOWLEVEL_INIT +#endif + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_DISPLAY_CPUINFO + +#define CONFIG_CMD_BOOTZ +#define CONFIG_OF_LIBFDT /* Device Tree support */ + +#define CONFIG_SYS_GENERIC_BOARD + +/* general purpose I/O */ +#define CONFIG_AT91_GPIO + +#define CONFIG_BOOTDELAY 3 + +/* + * BOOTP options + */ +#define CONFIG_BOOTP_BOOTFILESIZE +#define CONFIG_BOOTP_BOOTPATH +#define CONFIG_BOOTP_GATEWAY +#define CONFIG_BOOTP_HOSTNAME + +/* + * Command line configuration. + */ +#include <config_cmd_default.h> +#undef CONFIG_CMD_FPGA +#undef CONFIG_CMD_IMI +#undef CONFIG_CMD_LOADS +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_SETEXPR + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "root=/dev/mmcblk0p2 rw rootwait" +#else +#define CONFIG_BOOTARGS \ + "console=ttyS0,115200 earlyprintk " \ + "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ + "256K(env),256k(evn_redundent),256k(spare)," \ + "512k(dtb),6M(kernel)ro,-(rootfs) " \ + "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" +#endif + +#define CONFIG_BAUDRATE 115200 + +#define CONFIG_SYS_PROMPT "U-Boot> " +#define CONFIG_SYS_CBSIZE 256 +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_LONGHELP +#define CONFIG_CMDLINE_EDITING +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_HUSH_PARSER + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) + +#endif diff --git a/include/configs/at91sam9m10g45ek.h b/include/configs/at91sam9m10g45ek.h index db5d5ea..e4c49f4 100644 --- a/include/configs/at91sam9m10g45ek.h +++ b/include/configs/at91sam9m10g45ek.h @@ -203,4 +203,62 @@ */ #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000) +/* Defines for SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x010000 +#define CONFIG_SPL_STACK 0x310000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT + +#define CONFIG_SYS_MONITOR_LEN 0x80000 + +#ifdef CONFIG_SYS_USE_MMC + +#define CONFIG_SPL_BSS_START_ADDR 0x70000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x00080000 +#define CONFIG_SYS_SPL_MALLOC_START 0x70080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000 + +#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SPL_NAND_ECC +#define CONFIG_SPL_NAND_SOFTECC +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE + +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS +#define CONFIG_SYS_NAND_ECCSIZE 256 +#define CONFIG_SYS_NAND_ECCBYTES 3 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ + 48, 49, 50, 51, 52, 53, 54, 55, \ + 56, 57, 58, 59, 60, 61, 62, 63, } +#endif + +#define CONFIG_SPL_ATMEL_SIZE +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CONFIG_SYS_AT91_PLLA 0x20c73f03 +#define CONFIG_SYS_MCKR 0x1301 +#define CONFIG_SYS_MCKR_CSS 0x1302 + +#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC0 #endif diff --git a/include/configs/at91sam9n12ek.h b/include/configs/at91sam9n12ek.h index f02fce9..c44da1c 100644 --- a/include/configs/at91sam9n12ek.h +++ b/include/configs/at91sam9n12ek.h @@ -201,11 +201,22 @@ #else /* CONFIG_SYS_USE_MMC */ /* bootstrap + u-boot + env + linux in mmc */ -#define CONFIG_ENV_IS_IN_MMC -/* For FAT system, most cases it should be in the reserved sector */ + +#ifdef CONFIG_ENV_IS_IN_MMC +/* Use raw reserved sectors to save environment */ #define CONFIG_ENV_OFFSET 0x2000 #define CONFIG_ENV_SIZE 0x1000 #define CONFIG_SYS_MMC_ENV_DEV 0 +#else +/* Use file in FAT file to save environment */ +#define CONFIG_ENV_IS_IN_FAT +#define CONFIG_FAT_WRITE +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_FILE "uboot.env" +#define FAT_ENV_DEVICE_AND_PART "0" +#define CONFIG_ENV_SIZE 0x4000 +#endif + #define CONFIG_BOOTCOMMAND \ "setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \ "fatload mmc 0:1 0x21000000 dtb;" \ @@ -228,6 +239,62 @@ * Size of malloc() pool */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) -#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ + +/* SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x6000 +#define CONFIG_SPL_STACK 0x308000 + +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CONFIG_SYS_AT91_PLLA 0x20953f03 +#define CONFIG_SYS_MCKR 0x1301 +#define CONFIG_SYS_MCKR_CSS 0x1302 + +#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER + +#elif CONFIG_SYS_USE_SPIFLASH +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400 + +#endif #endif diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h index 6d8b71d..1a481b3 100644 --- a/include/configs/at91sam9x5ek.h +++ b/include/configs/at91sam9x5ek.h @@ -243,4 +243,61 @@ */ #define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000) +/* SPL */ +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_TEXT_BASE 0x300000 +#define CONFIG_SPL_MAX_SIZE 0x6000 +#define CONFIG_SPL_STACK 0x308000 + +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_GPIO_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT + +#define CONFIG_SPL_BOARD_INIT +#define CONFIG_SYS_MONITOR_LEN (512 << 10) + +#define CONFIG_SYS_MASTER_CLOCK 132096000 +#define CONFIG_SYS_AT91_PLLA 0x20c73f03 +#define CONFIG_SYS_MCKR 0x1301 +#define CONFIG_SYS_MCKR_CSS 0x1302 + +#define ATMEL_BASE_MPDDRC ATMEL_BASE_DDRSDRC + +#ifdef CONFIG_SYS_USE_MMC +#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/arm926ejs/u-boot-spl.lds +#define CONFIG_SPL_MMC_SUPPORT +#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400 +#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200 +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" +#define CONFIG_SPL_FAT_SUPPORT +#define CONFIG_SPL_LIBDISK_SUPPORT + +#elif CONFIG_SYS_USE_NANDFLASH +#define CONFIG_SPL_NAND_SUPPORT +#define CONFIG_SPL_NAND_DRIVERS +#define CONFIG_SPL_NAND_BASE +#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000 +#define CONFIG_SYS_NAND_5_ADDR_CYCLE +#define CONFIG_SYS_NAND_PAGE_SIZE 0x800 +#define CONFIG_SYS_NAND_PAGE_COUNT 64 +#define CONFIG_SYS_NAND_OOBSIZE 64 +#define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 +#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 +#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER + +#elif CONFIG_SYS_USE_SPIFLASH +#define CONFIG_SPL_SPI_SUPPORT +#define CONFIG_SPL_SPI_FLASH_SUPPORT +#define CONFIG_SPL_SPI_LOAD +#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8400 + +#endif + #endif diff --git a/include/configs/canyonlands.h b/include/configs/canyonlands.h index 7a1499d..ed790cc 100644 --- a/include/configs/canyonlands.h +++ b/include/configs/canyonlands.h @@ -13,8 +13,6 @@ #include <linux/kconfig.h> -#define CONFIG_SYS_GENERIC_BOARD - /*----------------------------------------------------------------------- * High Level Configuration Options *----------------------------------------------------------------------*/ diff --git a/include/configs/cobra5272.h b/include/configs/cobra5272.h index 4644369..b9f0b0b 100644 --- a/include/configs/cobra5272.h +++ b/include/configs/cobra5272.h @@ -25,16 +25,6 @@ #define _CONFIG_COBRA5272_H /* --- - * Define processor - * possible values for Sentec board: only Coldfire M5272 processor supported - * (please do not change) - * --- - */ - -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5272 /* define processor type */ - -/* --- * Defines processor clock - important for correct timings concerning serial * interface etc. * --- diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h index 225ffdd..8e27ae4 100644 --- a/include/configs/corenet_ds.h +++ b/include/configs/corenet_ds.h @@ -248,7 +248,6 @@ #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/corvus.h b/include/configs/corvus.h index ace511f..f5b8f9b 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -16,9 +16,6 @@ #include <asm/hardware.h> -#define MACH_TYPE_CORVUS 2066 - -#define CONFIG_MACH_TYPE MACH_TYPE_CORVUS #define CONFIG_SYS_GENERIC_BOARD /* * Warning: changing CONFIG_SYS_TEXT_BASE requires diff --git a/include/configs/crownbay.h b/include/configs/crownbay.h index b927b1c..df32f2a 100644 --- a/include/configs/crownbay.h +++ b/include/configs/crownbay.h @@ -52,8 +52,20 @@ #define CONFIG_MMC_SDMA #define CONFIG_CMD_MMC +/* Topcliff Gigabit Ethernet */ +#define CONFIG_PCH_GBE +#define CONFIG_PHYLIB + /* Video is not supported */ #undef CONFIG_VIDEO #undef CONFIG_CFB_CONSOLE +/* Environment configuration */ +#undef CONFIG_ENV_IS_NOWHERE +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_ENV_OFFSET 0 + #endif /* __CONFIG_H */ diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h index 8a7447d..56317ef 100644 --- a/include/configs/dbau1x00.h +++ b/include/configs/dbau1x00.h @@ -15,7 +15,6 @@ #define CONFIG_DBAU1X00 1 #define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO #ifdef CONFIG_DBAU1000 diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index dee2b11..8fe0e6c 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -77,6 +77,7 @@ #define CONFIG_TI_SPI_MMAP #define CONFIG_SF_DEFAULT_SPEED 48000000 #define CONFIG_DEFAULT_SPI_MODE SPI_MODE_3 +#define CONFIG_QSPI_QUAD_SUPPORT /* * Default to using SPI for environment, etc. diff --git a/include/configs/eb_cpu5282.h b/include/configs/eb_cpu5282.h index bdca705..e2b9326 100644 --- a/include/configs/eb_cpu5282.h +++ b/include/configs/eb_cpu5282.h @@ -15,9 +15,6 @@ * High Level Configuration Options (easy to change) * *----------------------------------------------------------------------*/ -#define CONFIG_MCF52x2 /* define processor family */ -#define CONFIG_M5282 /* define processor type */ - #define CONFIG_MISC_INIT_R #define CONFIG_MCFUART diff --git a/include/configs/ethernut5.h b/include/configs/ethernut5.h index ce61a16..b79000e 100644 --- a/include/configs/ethernut5.h +++ b/include/configs/ethernut5.h @@ -153,7 +153,6 @@ /* JFFS2 */ #ifdef CONFIG_CMD_JFFS2 -#define CONFIG_MTD_NAND_ECC_JFFS2 #define CONFIG_JFFS2_CMDLINE #define CONFIG_JFFS2_NAND #endif diff --git a/include/configs/galileo.h b/include/configs/galileo.h index d745f4e..288acf3 100644 --- a/include/configs/galileo.h +++ b/include/configs/galileo.h @@ -57,4 +57,17 @@ #define CONFIG_MMC_SDMA #define CONFIG_CMD_MMC +/* 10/100M Ethernet support */ +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_ALTDESCRIPTOR +#define CONFIG_PHYLIB + +/* Environment configuration */ +#undef CONFIG_ENV_IS_NOWHERE +#undef CONFIG_ENV_SIZE +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SIZE 0x1000 +#define CONFIG_ENV_SECT_SIZE 0x1000 +#define CONFIG_ENV_OFFSET 0 + #endif /* __CONFIG_H */ diff --git a/include/configs/ids8313.h b/include/configs/ids8313.h index 2384864..c1ca56c 100644 --- a/include/configs/ids8313.h +++ b/include/configs/ids8313.h @@ -214,7 +214,6 @@ #define CONFIG_SYS_NAND_BASE 0xE1000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 #define CONFIG_SYS_NAND_MAX_CHIPS 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_NAND_FSL_ELBC #define CONFIG_SYS_NAND_PAGE_SIZE (2048) #define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h index 949b3da..b70b5b1 100644 --- a/include/configs/km/kmp204x-common.h +++ b/include/configs/km/kmp204x-common.h @@ -167,7 +167,6 @@ unsigned long get_board_sys_clk(unsigned long dummy); #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index 3dc4da3..5de416d 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -251,7 +251,6 @@ unsigned long get_board_ddr_clk(void); #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/ls2085a_common.h b/include/configs/ls2085a_common.h index f80efed..e0435cc 100644 --- a/include/configs/ls2085a_common.h +++ b/include/configs/ls2085a_common.h @@ -191,7 +191,6 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/malta.h b/include/configs/malta.h index 354672e..9445c9b 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -14,7 +14,6 @@ * System configuration */ #define CONFIG_MALTA -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_BOARD_EARLY_INIT_F #define CONFIG_DISPLAY_BOARDINFO diff --git a/include/configs/mx6slevk.h b/include/configs/mx6slevk.h index 21c654b..dad49f9 100644 --- a/include/configs/mx6slevk.h +++ b/include/configs/mx6slevk.h @@ -249,4 +249,11 @@ #define CONFIG_SYS_MMC_ENV_DEV 1 /* SDHC2*/ #endif +#define CONFIG_IMX6_THERMAL + +#define CONFIG_CMD_FUSE +#if defined(CONFIG_CMD_FUSE) || defined(CONFIG_IMX6_THERMAL) +#define CONFIG_MXC_OCOTP +#endif + #endif /* __CONFIG_H */ diff --git a/include/configs/omap4_panda.h b/include/configs/omap4_panda.h index 7378acd..e97c5e3 100644 --- a/include/configs/omap4_panda.h +++ b/include/configs/omap4_panda.h @@ -43,8 +43,13 @@ #define CONFIG_CMD_GPIO /* ENV related config options */ -#define CONFIG_ENV_IS_NOWHERE #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG +#define CONFIG_ENV_IS_IN_FAT +#define FAT_ENV_INTERFACE "mmc" +#define FAT_ENV_DEVICE_AND_PART "0:1" +#define FAT_ENV_FILE "uboot.env" +#define CONFIG_CMD_SAVEENV +#define CONFIG_ENV_OVERWRITE #endif /* __CONFIG_PANDA_H */ diff --git a/include/configs/p1_p2_rdb_pc.h b/include/configs/p1_p2_rdb_pc.h index 5f27c2a..a5f9717 100644 --- a/include/configs/p1_p2_rdb_pc.h +++ b/include/configs/p1_p2_rdb_pc.h @@ -494,7 +494,6 @@ #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND #if defined(CONFIG_P1020RDB_PD) #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) diff --git a/include/configs/pb1x00.h b/include/configs/pb1x00.h index 61e6af3..a1926bb 100644 --- a/include/configs/pb1x00.h +++ b/include/configs/pb1x00.h @@ -15,7 +15,6 @@ #define CONFIG_PB1X00 1 #define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO #ifdef CONFIG_PB1000 diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h index 1548d3e..75da8a1 100644 --- a/include/configs/qemu-mips.h +++ b/include/configs/qemu-mips.h @@ -14,7 +14,6 @@ #define CONFIG_QEMU_MIPS -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_MISC_INIT_R diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h index 61cafad..b07ca4e 100644 --- a/include/configs/qemu-mips64.h +++ b/include/configs/qemu-mips64.h @@ -14,7 +14,6 @@ #define CONFIG_QEMU_MIPS -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO #define CONFIG_MISC_INIT_R diff --git a/include/configs/rcar-gen2-common.h b/include/configs/rcar-gen2-common.h index e9ef7cc..c33f1cb 100644 --- a/include/configs/rcar-gen2-common.h +++ b/include/configs/rcar-gen2-common.h @@ -35,8 +35,6 @@ #define CONFIG_SYS_THUMB_BUILD #define CONFIG_SYS_GENERIC_BOARD -#define CONFIG_SYS_MALLOC_F_LEN (1 << 10) - /* Support File sytems */ #define CONFIG_FAT_WRITE #define CONFIG_DOS_PARTITION diff --git a/include/configs/sama5d3_xplained.h b/include/configs/sama5d3_xplained.h index c82728e..bfd8aa7 100644 --- a/include/configs/sama5d3_xplained.h +++ b/include/configs/sama5d3_xplained.h @@ -10,30 +10,10 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/hardware.h> - -#define CONFIG_SYS_TEXT_BASE 0x26f00000 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ - -#define CONFIG_ARCH_CPU_INIT - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMD_BOOTZ -#define CONFIG_OF_LIBFDT /* Device Tree support */ - -#define CONFIG_SYS_GENERIC_BOARD +/* No NOR flash, this definition should put before common header */ +#define CONFIG_SYS_NO_FLASH -/* general purpose I/O */ -#define CONFIG_AT91_GPIO +#include "at91-sama5_common.h" /* serial console */ #define CONFIG_ATMEL_USART @@ -51,29 +31,6 @@ */ #define ATMEL_PMC_UHP AT91SAM926x_PMC_UHP -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* No NOR flash */ -#define CONFIG_SYS_NO_FLASH - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_LOADS -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -181,34 +138,6 @@ #define CONFIG_ENV_IS_NOWHERE #endif -#ifdef CONFIG_SYS_USE_MMC -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "root=/dev/mmcblk0p2 rw rootwait" -#else -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256K(env),256k(evn_redundent),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) - /* SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x300000 diff --git a/include/configs/sama5d3xek.h b/include/configs/sama5d3xek.h index a99b559..d933a9e 100644 --- a/include/configs/sama5d3xek.h +++ b/include/configs/sama5d3xek.h @@ -13,30 +13,11 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/hardware.h> - -#define CONFIG_SYS_TEXT_BASE 0x26f00000 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ - -#define CONFIG_ARCH_CPU_INIT - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif - -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMD_BOOTZ -#define CONFIG_OF_LIBFDT /* Device Tree support */ - -#define CONFIG_SYS_GENERIC_BOARD - -/* general purpose I/O */ -#define CONFIG_AT91_GPIO +/* + * If has No NOR flash, please put the definition: CONFIG_SYS_NO_FLASH + * before the common header. + */ +#include "at91-sama5_common.h" /* serial console */ #define CONFIG_ATMEL_USART @@ -69,40 +50,17 @@ /* board specific (not enough SRAM) */ #define CONFIG_SAMA5D3_LCD_BASE 0x23E00000 -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - /* NOR flash */ +#ifndef CONFIG_SYS_NO_FLASH #define CONFIG_CMD_FLASH - -#ifdef CONFIG_CMD_FLASH #define CONFIG_FLASH_CFI_DRIVER #define CONFIG_SYS_FLASH_CFI #define CONFIG_SYS_FLASH_PROTECTION #define CONFIG_SYS_FLASH_BASE 0x10000000 #define CONFIG_SYS_MAX_FLASH_SECT 131 #define CONFIG_SYS_MAX_FLASH_BANKS 1 -#else -#define CONFIG_SYS_NO_FLASH #endif -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_LOADS -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP - /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -228,34 +186,6 @@ #define CONFIG_ENV_IS_NOWHERE #endif -#ifdef CONFIG_SYS_USE_MMC -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "root=/dev/mmcblk0p2 rw rootwait" -#else -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256K(env),256k(evn_redundent),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) - /* SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x300000 diff --git a/include/configs/sama5d4_xplained.h b/include/configs/sama5d4_xplained.h index 4cb0761..5fb621e 100644 --- a/include/configs/sama5d4_xplained.h +++ b/include/configs/sama5d4_xplained.h @@ -10,59 +10,16 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/hardware.h> - -#define CONFIG_SYS_TEXT_BASE 0x26f00000 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ - -#define CONFIG_ARCH_CPU_INIT - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMD_BOOTZ -#define CONFIG_OF_LIBFDT /* Device Tree support */ - -#define CONFIG_SYS_GENERIC_BOARD +/* No NOR flash, this definition should put before common header */ +#define CONFIG_SYS_NO_FLASH -/* general purpose I/O */ -#define CONFIG_AT91_GPIO +#include "at91-sama5_common.h" /* serial console */ #define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_USART3 #define CONFIG_USART_ID ATMEL_ID_USART3 -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* No NOR flash */ -#define CONFIG_SYS_NO_FLASH - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_LOADS -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SETEXPR - /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -199,33 +156,6 @@ "bootz 0x22000000 - 0x21000000" #endif -#ifdef CONFIG_SYS_USE_MMC -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "root=/dev/mmcblk0p2 rw rootwait" -#else -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256K(env),256k(evn_redundent),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) /* SPL */ diff --git a/include/configs/sama5d4ek.h b/include/configs/sama5d4ek.h index 897d481..546d7a3 100644 --- a/include/configs/sama5d4ek.h +++ b/include/configs/sama5d4ek.h @@ -10,59 +10,16 @@ #ifndef __CONFIG_H #define __CONFIG_H -#include <asm/hardware.h> - -#define CONFIG_SYS_TEXT_BASE 0x26f00000 - -/* ARM asynchronous clock */ -#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 -#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ - -#define CONFIG_ARCH_CPU_INIT - -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SKIP_LOWLEVEL_INIT -#endif -#define CONFIG_BOARD_EARLY_INIT_F -#define CONFIG_DISPLAY_CPUINFO - -#define CONFIG_CMD_BOOTZ -#define CONFIG_OF_LIBFDT /* Device Tree support */ - -#define CONFIG_SYS_GENERIC_BOARD +/* No NOR flash, this definition should put before common header */ +#define CONFIG_SYS_NO_FLASH -/* general purpose I/O */ -#define CONFIG_AT91_GPIO +#include "at91-sama5_common.h" /* serial console */ #define CONFIG_ATMEL_USART #define CONFIG_USART_BASE ATMEL_BASE_USART3 #define CONFIG_USART_ID ATMEL_ID_USART3 -#define CONFIG_BOOTDELAY 3 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* No NOR flash */ -#define CONFIG_SYS_NO_FLASH - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_IMI -#undef CONFIG_CMD_LOADS -#define CONFIG_CMD_PING -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_SETEXPR - /* SDRAM */ #define CONFIG_NR_DRAM_BANKS 1 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS @@ -197,35 +154,6 @@ "bootz 0x22000000 - 0x21000000" #endif -#ifdef CONFIG_SYS_USE_MMC -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "root=/dev/mmcblk0p2 rw rootwait" -#else -#define CONFIG_BOOTARGS \ - "console=ttyS0,115200 earlyprintk " \ - "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ - "256K(env),256k(evn_redundent),256k(spare)," \ - "512k(dtb),6M(kernel)ro,-(rootfs) " \ - "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs" -#endif - -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_PROMPT "U-Boot> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP -#define CONFIG_CMDLINE_EDITING -#define CONFIG_AUTO_COMPLETE -#define CONFIG_SYS_HUSH_PARSER - -/* Size of malloc() pool */ -#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) - - /* SPL */ #define CONFIG_SPL_FRAMEWORK #define CONFIG_SPL_TEXT_BASE 0x200000 diff --git a/include/configs/secomx6quq7.h b/include/configs/secomx6quq7.h new file mode 100644 index 0000000..46ffb7a --- /dev/null +++ b/include/configs/secomx6quq7.h @@ -0,0 +1,166 @@ +/* + * Copyright (C) 2013 Seco S.r.l + * + * Configuration settings for the Seco Boards. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "mx6_common.h" +#include <asm/arch/imx-regs.h> +#include <asm/imx-common/gpio.h> +#include <linux/sizes.h> + +#define CONFIG_SYS_GENERIC_BOARD +#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO + +#define CONFIG_CMDLINE_TAG +#define CONFIG_SETUP_MEMORY_TAGS +#define CONFIG_INITRD_TAG +#define CONFIG_REVISION_TAG +#define CONFIG_BOARD_REVISION_TAG + +/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M) + +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_MXC_GPIO + +#define CONFIG_MXC_UART +#define CONFIG_MXC_UART_BASE UART2_BASE + +/* allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_CONS_INDEX 1 +#define CONFIG_BAUDRATE 115200 + +/* Command definition */ +#include <config_cmd_default.h> + +#undef CONFIG_CMD_IMLS + +#define CONFIG_CMD_BMODE +#define CONFIG_CMD_SETEXPR + +#define CONFIG_BOOTDELAY 3 + +#define CONFIG_SYS_MEMTEST_START 0x10000000 +#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M) +#define CONFIG_LOADADDR 0x12000000 +#define CONFIG_SYS_TEXT_BASE 0x17800000 + +/* MMC Configuration */ +#define CONFIG_FSL_ESDHC +#define CONFIG_FSL_USDHC +#define CONFIG_SYS_FSL_USDHC_NUM 2 +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 + +#define CONFIG_MMC +#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_BOUNCE_BUFFER +#define CONFIG_CMD_EXT2 +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION + +/* Ethernet Configuration */ +#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RGMII +#define CONFIG_ETHPRIME "FEC" +#define CONFIG_FEC_MXC_PHYADDR 6 +#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL + +#define CONFIG_EXTRA_ENV_SETTINGS \ + "netdev=eth0\0" \ + "ethprime=FEC0\0" \ + "netdev=eth0\0" \ + "ethprime=FEC0\0" \ + "uboot=u-boot.bin\0" \ + "kernel=uImage\0" \ + "nfsroot=/opt/eldk/arm\0" \ + "ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0" \ + "ip_server=10.0.0.1\0" \ + "nfs_path=/targetfs \0" \ + "memory=mem=1024M\0" \ + "bootdev=mmc dev 0; ext2load mmc 0:1\0" \ + "root=root=/dev/mmcblk0p1\0" \ + "option=rootwait rw fixrtc rootflags=barrier=1\0" \ + "cpu_freq=arm_freq=996\0" \ + "setbootargs=setenv bootargs console=ttymxc1,115200 ${root}" \ + " ${option} ${memory} ${cpu_freq}\0" \ + "setbootargs_nfs=setenv bootargs console=ttymxc1,115200" \ + " root=/dev/nfs nfsroot=${ip_server}:${nfs_path}" \ + " nolock,wsize=4096,rsize=4096 ip=:::::eth0:dhcp" \ + " ${memory} ${cpu_freq}\0" \ + "setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0" \ + "bootcmd=run setbootargs; run setbootdev; run boot_dev;" \ + " bootm 0x10800000\0" \ + "stdin=serial\0" \ + "stdout=serial\0" \ + "stderr=serial\0" + + +/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP +#define CONFIG_SYS_HUSH_PARSER +#define CONFIG_SYS_PROMPT "SECO MX6Q uQ7 U-Boot > " + +#define CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 + +/* Print Buffer Size */ +#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ + sizeof(CONFIG_SYS_PROMPT) + 16) +#define CONFIG_SYS_MAXARGS 16 +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE + +#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR +#define CONFIG_SYS_HZ 1000 + +#define CONFIG_CMDLINE_EDITING + + +/* Physical Memory Map */ +#define CONFIG_NR_DRAM_BANKS 1 +#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR +#define PHYS_SDRAM_SIZE (2u * 1024 * 1024 * 1024) + +#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM +#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR +#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE + +#define CONFIG_SYS_INIT_SP_OFFSET \ + (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) + +/* FLASH and environment organization */ +#define CONFIG_SYS_NO_FLASH + +#define CONFIG_ENV_SIZE (8 * 1024) + +#if defined(CONFIG_ENV_IS_IN_MMC) + #define CONFIG_ENV_OFFSET (6 * 128 * 1024) + #define CONFIG_SYS_MMC_ENV_DEV 0 + #define CONFIG_DYNAMIC_MMC_DEVNO +#endif + +#define CONFIG_OF_LIBFDT +#define CONFIG_CMD_BOOTZ + +#ifndef CONFIG_SYS_DCACHE_OFF +#define CONFIG_CMD_CACHE +#endif + +#endif /* __CONFIG_H */ diff --git a/include/configs/sun4i.h b/include/configs/sun4i.h index 1537e53..7cd5c69 100644 --- a/include/configs/sun4i.h +++ b/include/configs/sun4i.h @@ -11,7 +11,6 @@ /* * A10 specific configuration */ -#define CONFIG_CLK_FULL_SPEED 1008000000 #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI diff --git a/include/configs/sun5i.h b/include/configs/sun5i.h index e755531..e0470d4 100644 --- a/include/configs/sun5i.h +++ b/include/configs/sun5i.h @@ -11,7 +11,6 @@ /* * High Level Configuration Options */ -#define CONFIG_CLK_FULL_SPEED 1008000000 #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index f5e11dd..617c1cd 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -14,7 +14,6 @@ /* * A31 specific configuration */ -#define CONFIG_CLK_FULL_SPEED 1008000000 #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index f817f73..7fa7cec 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -12,7 +12,6 @@ /* * A20 specific configuration */ -#define CONFIG_CLK_FULL_SPEED 912000000 #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI @@ -21,8 +20,7 @@ #define CONFIG_ARMV7_PSCI 1 #define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE -#define CONFIG_SYS_CLK_FREQ 24000000 -#define CONFIG_TIMER_CLK_FREQ CONFIG_SYS_CLK_FREQ +#define CONFIG_TIMER_CLK_FREQ 24000000 /* * Include common sunxi configuration where most the settings are diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index 3bdedb3..79796d7 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -12,7 +12,6 @@ /* * A23 specific configuration */ -#define CONFIG_CLK_FULL_SPEED 1008000000 #ifdef CONFIG_USB_EHCI #define CONFIG_USB_EHCI_SUNXI diff --git a/include/configs/vct.h b/include/configs/vct.h index 83e4163..88e58ec 100644 --- a/include/configs/vct.h +++ b/include/configs/vct.h @@ -25,7 +25,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_SYS_GENERIC_BOARD #define CONFIG_DISPLAY_BOARDINFO #define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */ diff --git a/include/configs/ve8313.h b/include/configs/ve8313.h index bce94b3..107f01a 100644 --- a/include/configs/ve8313.h +++ b/include/configs/ve8313.h @@ -186,7 +186,6 @@ */ #define CONFIG_SYS_NAND_BASE 0x61000000 #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_CMD_NAND 1 #define CONFIG_NAND_FSL_ELBC 1 #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 diff --git a/include/configs/vexpress_aemv8a.h b/include/configs/vexpress_aemv8a.h index 047514a..9ddb594 100644 --- a/include/configs/vexpress_aemv8a.h +++ b/include/configs/vexpress_aemv8a.h @@ -17,20 +17,11 @@ #ifndef CONFIG_SEMIHOSTING #error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING #endif -#define CONFIG_BOARD_LATE_INIT #define CONFIG_ARMV8_SWITCH_TO_EL1 #endif #define CONFIG_REMAKE_ELF -#if !defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) && \ - !defined(CONFIG_TARGET_VEXPRESS64_JUNO) -/* Base FVP and Juno not using GICv3 yet */ -#define CONFIG_GICV3 -#endif - -/*#define CONFIG_ARMV8_SWITCH_TO_EL1*/ - #define CONFIG_SUPPORT_RAW_INITRD /* Cache Definitions */ @@ -49,8 +40,7 @@ #define CONFIG_SYS_TEXT_BASE 0xe0000000 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) #else -#define CONFIG_SYS_TEXT_BASE 0x80000000 -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0) +#error "Unknown board variant" #endif /* Flat Device Tree Definitions */ @@ -120,10 +110,9 @@ #define GICD_BASE (0x2C010000) #define GICC_BASE (0x2C02f000) #else -#define GICD_BASE (0x2C001000) -#define GICC_BASE (0x2C002000) -#endif +#error "Unknown board variant" #endif +#endif /* !CONFIG_GICV3 */ #define CONFIG_SYS_MEMTEST_START V2M_BASE #define CONFIG_SYS_MEMTEST_END (V2M_BASE + 0x80000000) @@ -211,12 +200,12 @@ /* Initial environment variables */ #ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP #define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_name=uImage\0" \ - "kernel_addr_r=0x80000000\0" \ + "kernel_name=uImage\0" \ + "kernel_addr=0x80000000\0" \ "initrd_name=ramdisk.img\0" \ - "initrd_addr_r=0x88000000\0" \ - "fdt_name=devtree.dtb\0" \ - "fdt_addr_r=0x83000000\0" \ + "initrd_addr=0x88000000\0" \ + "fdt_name=devtree.dtb\0" \ + "fdt_addr=0x83000000\0" \ "fdt_high=0xffffffffffffffff\0" \ "initrd_high=0xffffffffffffffff\0" @@ -224,24 +213,17 @@ "0x1c090000 debug user_debug=31 "\ "loglevel=9" -#define CONFIG_BOOTCOMMAND "fdt addr $fdt_addr_r; fdt resize; " \ - "fdt chosen $initrd_addr_r $initrd_end; " \ - "bootm $kernel_addr_r - $fdt_addr_r" +#define CONFIG_BOOTCOMMAND "smhload ${kernel_name} ${kernel_addr}; " \ + "smhload ${fdt_name} $fdt_addr; " \ + "smhload ${initrd_name} $initrd_addr initrd_end; " \ + "fdt addr $fdt_addr; fdt resize; " \ + "fdt chosen $initrd_addr $initrd_end; " \ + "bootm $kernel_addr - $fdt_addr" #define CONFIG_BOOTDELAY 1 #else - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "kernel_addr_r=0x80000000\0" \ - "initrd_addr_r=0x88000000\0" \ - "fdt_addr_r=0x83000000\0" \ - "fdt_high=0xa0000000\0" - -#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 root=/dev/ram0" -#define CONFIG_BOOTCOMMAND "bootm $kernel_addr_r " \ - "$initrd_addr_r:$initrd_size $fdt_addr_r" -#define CONFIG_BOOTDELAY -1 +#error "Unknown board variant" #endif /* Do not preserve environment */ diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h index 994874c..b7dd63e 100644 --- a/include/configs/x86-common.h +++ b/include/configs/x86-common.h @@ -243,7 +243,34 @@ #define CONFIG_CMD_USB -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_STD_DEVICES_SETTINGS +/* Default environment */ +#define CONFIG_ROOTPATH "/opt/nfsroot" +#define CONFIG_HOSTNAME "x86" +#define CONFIG_BOOTFILE "bzImage" +#define CONFIG_LOADADDR 0x1000000 + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_STD_DEVICES_SETTINGS \ + "netdev=eth0\0" \ + "consoledev=ttyS0\0" \ + "othbootargs=acpi=off\0" \ + "ramdiskaddr=0x2000000\0" \ + "ramdiskfile=initramfs.gz\0" + +#define CONFIG_RAMBOOTCOMMAND \ + "setenv bootargs root=/dev/ram rw " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftpboot $loadaddr $bootfile;" \ + "tftpboot $ramdiskaddr $ramdiskfile;" \ + "zboot $loadaddr 0 $ramdiskaddr $filesize" + +#define CONFIG_NFSBOOTCOMMAND \ + "setenv bootargs root=/dev/nfs rw " \ + "nfsroot=$serverip:$rootpath " \ + "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ + "console=$consoledev,$baudrate $othbootargs;" \ + "tftpboot $loadaddr $bootfile;" \ + "zboot $loadaddr" #endif /* __CONFIG_H */ diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h index d6b6143..988a2e8 100644 --- a/include/configs/xpedite537x.h +++ b/include/configs/xpedite537x.h @@ -131,7 +131,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ CONFIG_SYS_NAND_BASE2} #define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_SYS_NAND_QUIET_TEST /* 2nd NAND flash not always populated */ #define CONFIG_NAND_FSL_ELBC diff --git a/include/configs/xpedite550x.h b/include/configs/xpedite550x.h index 4536b94..ac3f4f1 100644 --- a/include/configs/xpedite550x.h +++ b/include/configs/xpedite550x.h @@ -122,7 +122,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy); #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE, \ CONFIG_SYS_NAND_BASE2} #define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_MTD_NAND_VERIFY_WRITE #define CONFIG_SYS_NAND_QUIET_TEST /* 2nd NAND flash not always populated */ #define CONFIG_NAND_FSL_ELBC diff --git a/include/fdtdec.h b/include/fdtdec.h index 5ac515d..11a7b86 100644 --- a/include/fdtdec.h +++ b/include/fdtdec.h @@ -347,7 +347,10 @@ int fdtdec_get_pci_vendev(const void *blob, int node, /** * Look at the pci address of a device node that represents a PCI device - * and parse the bus, device and function number from it. + * and parse the bus, device and function number from it. For some cases + * like the bus number encoded in reg property is not correct after pci + * enumeration, this function looks through the node's compatible strings + * to get these numbers extracted instead. * * @param blob FDT blob * @param node node to examine diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 8438490..bc927ec 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -678,11 +678,6 @@ struct nand_chip { void (*write_byte)(struct mtd_info *mtd, uint8_t byte); void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); -#ifdef __UBOOT__ -#if defined(CONFIG_MTD_NAND_VERIFY_WRITE) - int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); -#endif -#endif void (*select_chip)(struct mtd_info *mtd, int chip); int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); diff --git a/include/nand.h b/include/nand.h index 15e31ab..d2a53ab 100644 --- a/include/nand.h +++ b/include/nand.h @@ -82,34 +82,8 @@ static inline int nand_erase(nand_info_t *info, loff_t off, size_t size) * declarations from nand_util.c ****************************************************************************/ -struct nand_write_options { - u_char *buffer; /* memory block containing image to write */ - ulong length; /* number of bytes to write */ - ulong offset; /* start address in NAND */ - int quiet; /* don't display progress messages */ - int autoplace; /* if true use auto oob layout */ - int forcejffs2; /* force jffs2 oob layout */ - int forceyaffs; /* force yaffs oob layout */ - int noecc; /* write without ecc */ - int writeoob; /* image contains oob data */ - int pad; /* pad to page size */ - int blockalign; /* 1|2|4 set multiple of eraseblocks - * to align to */ -}; - -typedef struct nand_write_options nand_write_options_t; typedef struct mtd_oob_ops mtd_oob_ops_t; -struct nand_read_options { - u_char *buffer; /* memory block in which read image is written*/ - ulong length; /* number of bytes to read */ - ulong offset; /* start address in NAND */ - int quiet; /* don't display progress messages */ - int readoob; /* put oob data in image */ -}; - -typedef struct nand_read_options nand_read_options_t; - struct nand_erase_options { loff_t length; /* number of bytes to erase */ loff_t offset; /* first address in NAND to erase */ @@ -130,15 +104,16 @@ typedef struct nand_erase_options nand_erase_options_t; int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, size_t *actual, loff_t lim, u_char *buffer); -#define WITH_YAFFS_OOB (1 << 0) /* whether write with yaffs format. This flag - * is a 'mode' meaning it cannot be mixed with - * other flags */ -#define WITH_DROP_FFS (1 << 1) /* drop trailing all-0xff pages */ +#define WITH_DROP_FFS (1 << 0) /* drop trailing all-0xff pages */ +#define WITH_WR_VERIFY (1 << 1) /* verify data was written correctly */ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length, size_t *actual, loff_t lim, u_char *buffer, int flags); int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts); int nand_torture(nand_info_t *nand, loff_t offset); +int nand_verify_page_oob(nand_info_t *nand, struct mtd_oob_ops *ops, + loff_t ofs); +int nand_verify(nand_info_t *nand, loff_t ofs, size_t len, u_char *buf); #define NAND_LOCK_STATUS_TIGHT 0x01 #define NAND_LOCK_STATUS_UNLOCK 0x04 diff --git a/include/net.h b/include/net.h index 43e3d28..237c932 100644 --- a/include/net.h +++ b/include/net.h @@ -191,6 +191,8 @@ struct ethernet_hdr { /* Ethernet header size */ #define ETHER_HDR_SIZE (sizeof(struct ethernet_hdr)) +#define ETH_FCS_LEN 4 /* Octets in the FCS */ + struct e802_hdr { uchar et_dest[6]; /* Destination node */ uchar et_src[6]; /* Source node */ diff --git a/include/netdev.h b/include/netdev.h index 90140bd..c69533e 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -69,6 +69,7 @@ int natsemi_initialize(bd_t *bis); int ne2k_register(void); int npe_initialize(bd_t *bis); int ns8382x_initialize(bd_t *bis); +int pch_gbe_register(bd_t *bis); int pcnet_initialize(bd_t *bis); int ppc_4xx_eth_initialize (bd_t *bis); int rtl8139_initialize(bd_t *bis); @@ -123,6 +124,9 @@ static inline int pci_eth_init(bd_t *bis) #ifdef CONFIG_E1000 num += e1000_initialize(bis); #endif +#ifdef CONFIG_PCH_GBE + num += pch_gbe_register(bis); +#endif #ifdef CONFIG_PCNET num += pcnet_initialize(bis); #endif diff --git a/include/usb_ether.h b/include/usb_ether.h index b38d037..23507e1 100644 --- a/include/usb_ether.h +++ b/include/usb_ether.h @@ -18,7 +18,6 @@ #define ETH_ZLEN 60 /* Min. octets in frame sans FCS */ #define ETH_DATA_LEN 1500 /* Max. octets in payload */ #define ETH_FRAME_LEN PKTSIZE_ALIGN /* Max. octets in frame sans FCS */ -#define ETH_FCS_LEN 4 /* Octets in the FCS */ struct ueth_data { /* eth info */ diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index 349f770..ff4ce6e 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -5,6 +5,12 @@ PHONY += oldconfig xconfig gconfig menuconfig config silentoldconfig update-po-config \ localmodconfig localyesconfig +# Added for U-Boot +# Linux has defconfig files in arch/$(SRCARCH)/configs/, +# on the other hand, U-Boot does in configs/. +# Set SRCARCH to .. fake this Makefile. +SRCARCH := .. + ifdef KBUILD_KCONFIG Kconfig := $(KBUILD_KCONFIG) else @@ -104,6 +110,10 @@ endif %_defconfig: $(obj)/conf $(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig) +# Added for U-Boot (backward compatibility) +%_config: %_defconfig + @: + configfiles=$(wildcard $(srctree)/kernel/configs/$(1).config $(srctree)/arch/$(SRCARCH)/configs/$(1).config) define mergeconfig diff --git a/scripts/multiconfig.sh b/scripts/multiconfig.sh deleted file mode 100755 index cc8a787..0000000 --- a/scripts/multiconfig.sh +++ /dev/null @@ -1,102 +0,0 @@ -#!/bin/sh -# -# A wrapper script to adjust Kconfig for U-Boot -# -# This file will be removed after cleaning up defconfig files -# -# Copyright (C) 2014, Masahiro Yamada <yamada.m@jp.panasonic.com> -# -# SPDX-License-Identifier: GPL-2.0+ -# - -set -e - -# Make a configuration target -# Usage: -# run_make_config <target> <objdir> -# <target>: Make target such as "config", "menuconfig", "defconfig", etc. -run_make_config () { - # Linux expects defconfig files in arch/$(SRCARCH)/configs/ directory, - # but U-Boot has them in configs/ directory. - # Give SRCARCH=.. to fake scripts/kconfig/Makefile. - $MAKE -f $srctree/scripts/Makefile.build obj=scripts/kconfig SRCARCH=.. $1 -} - -do_silentoldconfig () { - run_make_config silentoldconfig - - # If the following part fails, include/config/auto.conf should be - # deleted so "make silentoldconfig" will be re-run on the next build. - $MAKE -f $srctree/scripts/Makefile.autoconf || { - rm -f include/config/auto.conf - exit 1 - } - - # include/config.h has been updated after "make silentoldconfig". - # We need to touch include/config/auto.conf so it gets newer - # than include/config.h. - # Otherwise, 'make silentoldconfig' would be invoked twice. - touch include/config/auto.conf -} - -cleanup_after_defconfig () { - rm -f configs/.tmp_defconfig - # ignore 'Directory not empty' error - # without using non-POSIX option '--ignore-fail-on-non-empty' - rmdir arch configs 2>/dev/null || true -} - -# Usage: -# do_board_defconfig <board>_defconfig -do_board_defconfig () { - defconfig_path=$srctree/configs/$1 - - if [ ! -r $defconfig_path ]; then - echo >&2 "***" - echo >&2 "*** Can't find default configuration \"configs/$1\"!" - echo >&2 "***" - exit 1 - fi - - mkdir -p arch configs - # prefix "*:" is deprecated. Drop it simply. - sed -e 's/^[+A-Z]*://' $defconfig_path > configs/.tmp_defconfig - - run_make_config .tmp_defconfig || { - cleanup_after_defconfig - exit 1 - } - - cleanup_after_defconfig -} - -do_board_felconfig () { - do_board_defconfig ${1%%_felconfig}_defconfig - if ! grep -q CONFIG_ARCH_SUNXI=y .config || ! grep -q CONFIG_SPL=y .config ; then - echo "$progname: Cannot felconfig a non-sunxi or non-SPL platform" >&2 - exit 1 - fi - sed -i -e 's/\# CONFIG_SPL_FEL is not set/CONFIG_SPL_FEL=y\nCONFIG_UART0_PORT_F=n/g' \ - .config -} - -do_others () { - run_make_config $1 -} - -progname=$(basename $0) -target=$1 - -case $target in -*_defconfig) - do_board_defconfig $target;; -*_felconfig) - do_board_felconfig $target;; -*_config) - # backward compatibility - do_board_defconfig ${target%_config}_defconfig;; -silentoldconfig) - do_silentoldconfig;; -*) - do_others $target;; -esac diff --git a/tools/mkenvimage.c b/tools/mkenvimage.c index 6971b91..8eee72e 100644 --- a/tools/mkenvimage.c +++ b/tools/mkenvimage.c @@ -214,14 +214,10 @@ int main(int argc, char **argv) } ret = close(txt_fd); } - /* The +1 is for the additionnal ending \0. See below. */ - if (filesize + 1 > envsize) { - fprintf(stderr, "The input file is larger than the environment partition size\n"); - return EXIT_FAILURE; - } - /* Replace newlines separating variables with \0 */ - for (fp = 0, ep = 0 ; fp < filesize ; fp++) { + /* Parse a byte at time until reaching the file OR until the environment fills + * up. Check ep against envsize - 1 to allow for extra trailing '\0'. */ + for (fp = 0, ep = 0 ; fp < filesize && ep < envsize - 1; fp++) { if (filebuf[fp] == '\n') { if (fp == 0 || filebuf[fp-1] == '\n') { /* @@ -249,6 +245,25 @@ int main(int argc, char **argv) envptr[ep++] = filebuf[fp]; } } + /* If there are more bytes in the file still, it means the env filled up + * before parsing the whole file. Eat comments & whitespace here to see if + * there was anything meaning full left in the file, and if so, throw a error + * and exit. */ + for( ; fp < filesize; fp++ ) + { + if (filebuf[fp] == '\n') { + if (fp == 0 || filebuf[fp-1] == '\n') { + /* Ignore blank lines */ + continue; + } + } else if ((fp == 0 || filebuf[fp-1] == '\n') && filebuf[fp] == '#') { + while (++fp < filesize && filebuf[fp] != '\n') + continue; + } else { + fprintf(stderr, "The environment file is too large for the target environment storage\n"); + return EXIT_FAILURE; + } + } /* * Make sure there is a final '\0' * And do it again on the next byte to mark the end of the environment. |