summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS4
-rw-r--r--arch/arm/include/asm/arch-omap24xx/omap2420.h10
-rw-r--r--board/apollon/Makefile43
-rw-r--r--board/apollon/apollon.c470
-rw-r--r--board/apollon/config.mk25
-rw-r--r--board/apollon/lowlevel_init.S337
-rw-r--r--board/apollon/mem.c237
-rw-r--r--board/apollon/mem.h170
-rw-r--r--board/apollon/sys_info.c396
-rw-r--r--boards.cfg1
-rw-r--r--doc/README.scrapyard1
-rw-r--r--include/configs/apollon.h261
-rw-r--r--onenand_ipl/board/apollon/Makefile87
-rw-r--r--onenand_ipl/board/apollon/apollon.c70
-rw-r--r--onenand_ipl/board/apollon/config.mk14
-rw-r--r--onenand_ipl/board/apollon/low_levelinit.S205
-rw-r--r--onenand_ipl/board/apollon/u-boot.onenand.lds53
17 files changed, 1 insertions, 2383 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index cd18732..aa54fe1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -777,10 +777,6 @@ Nagendra T S <nagendra@mistralsolutions.com>
am3517_crane ARM ARMV7 (AM35x SoC)
-Kyungmin Park <kyungmin.park@samsung.com>
-
- apollon ARM1136EJS
-
Sandeep Paulraj <s-paulraj@ti.com>
davinci_dm355evm ARM926EJS
diff --git a/arch/arm/include/asm/arch-omap24xx/omap2420.h b/arch/arm/include/asm/arch-omap24xx/omap2420.h
index 6032419..d8d5647 100644
--- a/arch/arm/include/asm/arch-omap24xx/omap2420.h
+++ b/arch/arm/include/asm/arch-omap24xx/omap2420.h
@@ -228,16 +228,6 @@
#define LAN_RESET_REGISTER (H4_CS1_BASE+0x1c)
#endif /* endif CONFIG_2420H4 */
-#if defined(CONFIG_APOLLON)
-#define APOLLON_CS0_BASE 0x00000000 /* OneNAND */
-#define APOLLON_CS1_BASE 0x08000000 /* ethernet */
-#define APOLLON_CS2_BASE 0x10000000 /* OneNAND */
-#define APOLLON_CS3_BASE 0x18000000 /* NOR */
-
-#define ETH_CONTROL_REG (APOLLON_CS1_BASE + 0x30b)
-#define LAN_RESET_REGISTER (APOLLON_CS1_BASE + 0x1c)
-#endif /* endif CONFIG_APOLLON */
-
/* Common */
#define LOW_LEVEL_SRAM_STACK 0x4020FFFC
diff --git a/board/apollon/Makefile b/board/apollon/Makefile
deleted file mode 100644
index 1bf1a32..0000000
--- a/board/apollon/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y := apollon.o mem.o sys_info.o
-SOBJS := lowlevel_init.o
-
-COBJS := $(COBJS-y)
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-#########################################################################
-
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c
deleted file mode 100644
index 76626f0..0000000
--- a/board/apollon/apollon.c
+++ /dev/null
@@ -1,470 +0,0 @@
-/*
- * (C) Copyright 2005-2007
- * Samsung Electronics.
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * Derived from omap2420
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/omap2420.h>
-#include <asm/io.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-#include <asm/arch/mem.h>
-#include <asm/mach-types.h>
-
-void wait_for_command_complete(unsigned int wd_base);
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define write_config_reg(reg, value) \
-do { \
- writeb(value, reg); \
-} while (0)
-
-#define mask_config_reg(reg, mask) \
-do { \
- char value = readb(reg) & ~(mask); \
- writeb(value, reg); \
-} while (0)
-
-/*******************************************************
- * Routine: delay
- * Description: spinning delay to use before udelay works
- ******************************************************/
-static inline void delay(unsigned long loops)
-{
- __asm__("1:\n" "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0"(loops));
-}
-
-/*****************************************
- * Routine: board_init
- * Description: Early hardware init.
- *****************************************/
-int board_init(void)
-{
- gpmc_init(); /* in SRAM or SDRM, finish GPMC */
-
- gd->bd->bi_arch_number = 919;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0 + 0x100);
-
- return 0;
-}
-
-/**********************************************************
- * Routine: s_init
- * Description: Does early system init of muxing and clocks.
- * - Called path is with sram stack.
- **********************************************************/
-void s_init(void)
-{
- watchdog_init();
- set_muxconf_regs();
- delay(100);
-
- peripheral_enable();
- icache_enable();
-}
-
-/*******************************************************
- * Routine: misc_init_r
- * Description: Init ethernet (done here so udelay works)
- ********************************************************/
-int misc_init_r(void)
-{
- return (0);
-}
-
-/****************************************
- * Routine: watchdog_init
- * Description: Shut down watch dogs
- *****************************************/
-void watchdog_init(void)
-{
- /* There are 4 watch dogs. 1 secure, and 3 general purpose.
- * The ROM takes care of the secure one. Of the 3 GP ones,
- * 1 can reset us directly, the other 2 only generate MPU interrupts.
- */
- __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR);
- wait_for_command_complete(WD2_BASE);
- __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR);
-
-#define MPU_WD_CLOCKED 1
-#if MPU_WD_CLOCKED
- /* value 0x10 stick on aptix, BIT4 polarity seems oppsite */
- __raw_writel(WD_UNLOCK1, WD3_BASE + WSPR);
- wait_for_command_complete(WD3_BASE);
- __raw_writel(WD_UNLOCK2, WD3_BASE + WSPR);
-
- __raw_writel(WD_UNLOCK1, WD4_BASE + WSPR);
- wait_for_command_complete(WD4_BASE);
- __raw_writel(WD_UNLOCK2, WD4_BASE + WSPR);
-#endif
-}
-
-/******************************************************
- * Routine: wait_for_command_complete
- * Description: Wait for posting to finish on watchdog
- ******************************************************/
-void wait_for_command_complete(unsigned int wd_base)
-{
- int pending = 1;
- do {
- pending = __raw_readl(wd_base + WWPS);
- } while (pending);
-}
-
-/*******************************************************************
- * Routine:board_eth_init
- * Description: take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete.
- ******************************************************************/
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_LAN91C96
- int cnt = 20;
-
- __raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2); /*protect->gpio74 */
-
- __raw_writew(0x0, LAN_RESET_REGISTER);
- do {
- __raw_writew(0x1, LAN_RESET_REGISTER);
- udelay(100);
- if (cnt == 0)
- goto eth_reset_err_out;
- --cnt;
- } while (__raw_readw(LAN_RESET_REGISTER) != 0x1);
-
- cnt = 20;
-
- do {
- __raw_writew(0x0, LAN_RESET_REGISTER);
- udelay(100);
- if (cnt == 0)
- goto eth_reset_err_out;
- --cnt;
- } while (__raw_readw(LAN_RESET_REGISTER) != 0x0000);
- udelay(1000);
-
- mask_config_reg(ETH_CONTROL_REG, 0x01);
- udelay(1000);
- rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-eth_reset_err_out:
-#endif
- return rc;
-}
-
-/**********************************************
- * Routine: dram_init
- * Description: sets uboots idea of sdram size
- **********************************************/
-int dram_init(void)
-{
- unsigned int size;
- u32 mtype, btype;
-#define NOT_EARLY 0
-
- btype = get_board_type();
- mtype = get_mem_type();
-
- display_board_info(btype);
-
- if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) {
- /* init other chip select */
- do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY);
- }
-
- size = get_sdr_cs_size(SDRC_CS0_OSET);
-
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = size;
-#if CONFIG_NR_DRAM_BANKS > 1
- size = get_sdr_cs_size(SDRC_CS1_OSET);
-
- gd->bd->bi_dram[1].start = gd->bd->bi_dram[0].start +
- gd->bd->bi_dram[0].size;
- gd->bd->bi_dram[1].size = size;
-#endif
-
- return 0;
-}
-
-/**********************************************************
- * Routine: set_muxconf_regs
- * Description: Setting up the configuration Mux registers
- * specific to the hardware
- *********************************************************/
-void set_muxconf_regs(void)
-{
- muxSetupSDRC();
- muxSetupGPMC();
- muxSetupUsb0(); /* USB Device */
- muxSetupUsbHost(); /* USB Host */
- muxSetupUART1();
- muxSetupLCD();
- muxSetupMMCSD();
- muxSetupTouchScreen();
-}
-
-/*****************************************************************
- * Routine: peripheral_enable
- * Description: Enable the clks & power for perifs (GPT2, UART1,...)
- ******************************************************************/
-void peripheral_enable(void)
-{
- unsigned int v, if_clks = 0, func_clks = 0;
-
- /* Enable GP2 timer. */
- if_clks |= BIT4 | BIT3;
- func_clks |= BIT4 | BIT3;
- /* Sys_clk input OMAP2420_GPT2 */
- v = __raw_readl(CM_CLKSEL2_CORE) | 0x4 | 0x2;
- __raw_writel(v, CM_CLKSEL2_CORE);
- __raw_writel(0x1, CM_CLKSEL_WKUP);
-
-#ifdef CONFIG_SYS_NS16550
- /* Enable UART1 clock */
- func_clks |= BIT21;
- if_clks |= BIT21;
-#endif
- /* Interface clocks on */
- v = __raw_readl(CM_ICLKEN1_CORE) | if_clks;
- __raw_writel(v, CM_ICLKEN1_CORE);
- /* Functional Clocks on */
- v = __raw_readl(CM_FCLKEN1_CORE) | func_clks;
- __raw_writel(v, CM_FCLKEN1_CORE);
- delay(1000);
-
-#ifndef KERNEL_UPDATED
- {
-#define V1 0xffffffff
-#define V2 0x00000007
-
- __raw_writel(V1, CM_FCLKEN1_CORE);
- __raw_writel(V2, CM_FCLKEN2_CORE);
- __raw_writel(V1, CM_ICLKEN1_CORE);
- __raw_writel(V1, CM_ICLKEN2_CORE);
- }
-#endif
-}
-
-/****************************************
- * Routine: muxSetupUsb0 (ostboot)
- * Description: Setup usb muxing
- *****************************************/
-void muxSetupUsb0(void)
-{
- mask_config_reg(CONTROL_PADCONF_USB0_PUEN, 0x1f);
- mask_config_reg(CONTROL_PADCONF_USB0_VP, 0x1f);
- mask_config_reg(CONTROL_PADCONF_USB0_VM, 0x1f);
- mask_config_reg(CONTROL_PADCONF_USB0_RCV, 0x1f);
- mask_config_reg(CONTROL_PADCONF_USB0_TXEN, 0x1f);
- mask_config_reg(CONTROL_PADCONF_USB0_SE0, 0x1f);
- mask_config_reg(CONTROL_PADCONF_USB0_DAT, 0x1f);
-}
-
-/****************************************
- * Routine: muxSetupUSBHost (ostboot)
- * Description: Setup USB Host muxing
- *****************************************/
-void muxSetupUsbHost(void)
-{
- /* V19 */
- write_config_reg(CONTROL_PADCONF_USB1_RCV, 1);
- /* W20 */
- write_config_reg(CONTROL_PADCONF_USB1_TXEN, 1);
- /* N14 */
- write_config_reg(CONTROL_PADCONF_GPIO69, 3);
- /* P15 */
- write_config_reg(CONTROL_PADCONF_GPIO70, 3);
- /* L18 */
- write_config_reg(CONTROL_PADCONF_GPIO102, 3);
- /* L19 */
- write_config_reg(CONTROL_PADCONF_GPIO103, 3);
- /* K15 */
- write_config_reg(CONTROL_PADCONF_GPIO104, 3);
- /* K14 */
- write_config_reg(CONTROL_PADCONF_GPIO105, 3);
-}
-
-/****************************************
- * Routine: muxSetupUART1 (ostboot)
- * Description: Set up uart1 muxing
- *****************************************/
-void muxSetupUART1(void)
-{
- /* UART1_CTS pin configuration, PIN = D21, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_UART1_CTS, 0);
- /* UART1_RTS pin configuration, PIN = H21, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_UART1_RTS, 0);
- /* UART1_TX pin configuration, PIN = L20, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_UART1_TX, 0);
- /* UART1_RX pin configuration, PIN = T21, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_UART1_RX, 0);
-}
-
-/****************************************
- * Routine: muxSetupLCD (ostboot)
- * Description: Setup lcd muxing
- *****************************************/
-void muxSetupLCD(void)
-{
- /* LCD_D0 pin configuration, PIN = Y7, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D0, 0);
- /* LCD_D1 pin configuration, PIN = P10 , Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D1, 0);
- /* LCD_D2 pin configuration, PIN = V8, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D2, 0);
- /* LCD_D3 pin configuration, PIN = Y8, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D3, 0);
- /* LCD_D4 pin configuration, PIN = W8, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D4, 0);
- /* LCD_D5 pin configuration, PIN = R10, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D5, 0);
- /* LCD_D6 pin configuration, PIN = Y9, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D6, 0);
- /* LCD_D7 pin configuration, PIN = V9, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D7, 0);
- /* LCD_D8 pin configuration, PIN = W9, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D8, 0);
- /* LCD_D9 pin configuration, PIN = P11, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D9, 0);
- /* LCD_D10 pin configuration, PIN = V10, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D10, 0);
- /* LCD_D11 pin configuration, PIN = Y10, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D11, 0);
- /* LCD_D12 pin configuration, PIN = W10, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D12, 0);
- /* LCD_D13 pin configuration, PIN = R11, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D13, 0);
- /* LCD_D14 pin configuration, PIN = V11, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D14, 0);
- /* LCD_D15 pin configuration, PIN = W11, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D15, 0);
- /* LCD_D16 pin configuration, PIN = P12, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D16, 0);
- /* LCD_D17 pin configuration, PIN = R12, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_D17, 0);
- /* LCD_PCLK pin configuration, PIN = W6, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_PCLK, 0);
- /* LCD_VSYNC pin configuration, PIN = V7, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_VSYNC, 0);
- /* LCD_HSYNC pin configuration, PIN = Y6, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_HSYNC, 0);
- /* LCD_ACBIAS pin configuration, PIN = W7, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_DSS_ACBIAS, 0);
-}
-
-/****************************************
- * Routine: muxSetupMMCSD (ostboot)
- * Description: set up MMC muxing
- *****************************************/
-void muxSetupMMCSD(void)
-{
- /* SDMMC_CLKI pin configuration, PIN = H15, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_MMC_CLKI, 0);
- /* SDMMC_CLKO pin configuration, PIN = G19, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_MMC_CLKO, 0);
- /* SDMMC_CMD pin configuration, PIN = H18, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_MMC_CMD, 0);
- /* SDMMC_DAT0 pin configuration, PIN = F20, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_MMC_DAT0, 0);
- /* SDMMC_DAT1 pin configuration, PIN = H14, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_MMC_DAT1, 0);
- /* SDMMC_DAT2 pin configuration, PIN = E19, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_MMC_DAT2, 0);
- /* SDMMC_DAT3 pin configuration, PIN = D19, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_MMC_DAT3, 0);
- /* SDMMC_DDIR0 pin configuration, PIN = F19, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR0, 0);
- /* SDMMC_DDIR1 pin configuration, PIN = E20, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR1, 0);
- /* SDMMC_DDIR2 pin configuration, PIN = F18, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR2, 0);
- /* SDMMC_DDIR3 pin configuration, PIN = E18, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR3, 0);
- /* SDMMC_CDIR pin configuration, PIN = G18, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_MMC_CMD_DIR, 0);
-}
-
-/******************************************
- * Routine: muxSetupTouchScreen (ostboot)
- * Description: Set up touch screen muxing
- *******************************************/
-void muxSetupTouchScreen(void)
-{
- /* SPI1_CLK pin configuration, PIN = U18, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_SPI1_CLK, 0);
- /* SPI1_MOSI pin configuration, PIN = V20, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_SPI1_SIMO, 0);
- /* SPI1_MISO pin configuration, PIN = T18, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_SPI1_SOMI, 0);
- /* SPI1_nCS0 pin configuration, PIN = U19, Mode = 0, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_SPI1_NCS0, 0);
-#define CONTROL_PADCONF_GPIO85 CONTROL_PADCONF_SPI1_NCS1
- /* PEN_IRQ pin configuration, PIN = N15, Mode = 3, PUPD=Disabled */
- write_config_reg(CONTROL_PADCONF_GPIO85, 3);
-}
-
-/***************************************************************
- * Routine: muxSetupGPMC (ostboot)
- * Description: Configures balls which cam up in protected mode
- ***************************************************************/
-void muxSetupGPMC(void)
-{
- /* gpmc_io_dir, MCR */
- volatile unsigned int *MCR = (unsigned int *) 0x4800008C;
- *MCR = 0x19000000;
-
- /* NOR FLASH CS0 */
- /* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode 0; Byte-3 */
- write_config_reg(CONTROL_PADCONF_GPMC_D2_BYTE3, 0);
- /* MPDB(Multi Port Debug Port) CS1 */
- /* signal - gpmc_ncs1; pin - N8; offset - 0x008D; mode 0; Byte-1 */
- write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE1, 0);
- /* signal - Gpmc_ncs2; pin - E2; offset - 0x008E; mode 0; Byte-2 */
- write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE2, 0);
- /* signal - Gpmc_ncs3; pin - N2; offset - 0x008F; mode 0; Byte-3 */
- write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE3, 0);
- /* signal - Gpmc_ncs4; pin - ??; offset - 0x0090; mode 0; Byte-4 */
- write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE4, 0);
- /* signal - Gpmc_ncs5; pin - ??; offset - 0x0091; mode 0; Byte-5 */
- write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE5, 0);
- /* signal - Gpmc_ncs6; pin - ??; offset - 0x0092; mode 0; Byte-6 */
- write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE6, 0);
- /* signal - Gpmc_ncs7; pin - ??; offset - 0x0093; mode 0; Byte-7 */
- write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE7, 0);
-}
-
-/****************************************************************
- * Routine: muxSetupSDRC (ostboot)
- * Description: Configures balls which come up in protected mode
- ****************************************************************/
-void muxSetupSDRC(void)
-{
- /* It's set by IPL */
-}
diff --git a/board/apollon/config.mk b/board/apollon/config.mk
deleted file mode 100644
index 66005d4..0000000
--- a/board/apollon/config.mk
+++ /dev/null
@@ -1,25 +0,0 @@
-#
-# (C) Copyright 2005-2007
-# Samsung Electronics
-#
-# Samsung December board with OMAP2420 (ARM1136) cpu
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# December has 1 bank of 128MB mDDR-SDRAM on CS0
-# December has 1 bank of 00MB mDDR-SDRAM on CS1
-# Physical Address:
-# 8000'0000 (bank0)
-# A000/0000 (bank1) ES2 will be configurable
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x83e80000
-
-# Used with full SRAM boot.
-# This is either with a GP system or a signed boot image.
-# easiest, and safest way to go if you can.
-#CONFIG_SYS_TEXT_BASE = 0x40270000
-
-# Handy to get symbols to debug ROM version.
-#CONFIG_SYS_TEXT_BASE = 0x0
-#CONFIG_SYS_TEXT_BASE = 0x08000000
diff --git a/board/apollon/lowlevel_init.S b/board/apollon/lowlevel_init.S
deleted file mode 100644
index f066fe4..0000000
--- a/board/apollon/lowlevel_init.S
+++ /dev/null
@@ -1,337 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2005-2007
- * Samsung Electronics,
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/omap2420.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/clocks.h>
-#include "mem.h"
-
-#define APOLLON_CS0_BASE 0x00000000
-
-#ifdef PRCM_CONFIG_I
-#define SDRC_ACTIM_CTRLA_0_VAL 0x7BA35907
-#define SDRC_ACTIM_CTRLB_0_VAL 0x00000013
-#define SDRC_RFR_CTRL_0_VAL 0x00044C01
-#elif defined(PRCM_CONFIG_II)
-#define SDRC_ACTIM_CTRLA_0_VAL 0x4A59B485
-#define SDRC_ACTIM_CTRLB_0_VAL 0x0000000C
-#define SDRC_RFR_CTRL_0_VAL 0x00030001
-#endif
-
-#define SDRAM_BASE_ADDRESS 0x80008000
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
-
-.globl lowlevel_init
-lowlevel_init:
-
-#ifdef CONFIG_SYS_NOR_BOOT
- /* Check running in SDRAM */
- mov r0, pc, lsr #28
- cmp r0, #8
- beq prcm_setup
-
-flash_setup:
- /* In Flash */
- ldr r0, =WD2_BASE
- ldr r1, =WD_UNLOCK1
- str r1, [r0, #WSPR]
-
- ldr r1, =WD_UNLOCK2
- str r1, [r0, #WSPR]
-
- /* Pin muxing for SDRC */
- mov r1, #0x00
- ldr r0, =0x480000A1 /* ball C12, mode 0 */
- strb r1, [r0]
-
- ldr r0, =0x48000032 /* ball D11, mode 0 */
- strb r1, [r0]
-
- ldr r0, =0x480000A3 /* ball B13, mode 0 */
- strb r1, [r0]
-
- /* SDRC setting */
- ldr r0, =OMAP2420_SDRC_BASE
- ldr r1, =0x00000010
- str r1, [r0, #0x10]
-
- ldr r1, =0x00000100
- str r1, [r0, #0x44]
-
- /* SDRC CS0 configuration */
- ldr r1, =0x00d04011
- str r1, [r0, #0x80]
-
- ldr r1, =SDRC_ACTIM_CTRLA_0_VAL
- str r1, [r0, #0x9C]
-
- ldr r1, =SDRC_ACTIM_CTRLB_0_VAL
- str r1, [r0, #0xA0]
-
- ldr r1, =SDRC_RFR_CTRL_0_VAL
- str r1, [r0, #0xA4]
-
- ldr r1, =0x00000041
- str r1, [r0, #0x70]
-
- /* Manual command sequence */
- ldr r1, =0x00000007
- str r1, [r0, #0xA8]
-
- ldr r1, =0x00000000
- str r1, [r0, #0xA8]
-
- ldr r1, =0x00000001
- str r1, [r0, #0xA8]
-
- ldr r1, =0x00000002
- str r1, [r0, #0xA8]
- str r1, [r0, #0xA8]
-
- /*
- * CS0 SDRC Mode register
- * Burst length = 4 - DDR memory
- * Serial mode
- * CAS latency = 3
- */
- ldr r1, =0x00000032
- str r1, [r0, #0x84]
-
- /* Note: You MUST set EMR values */
- /* EMR1 & EMR2 */
- ldr r1, =0x00000000
- str r1, [r0, #0x88]
- str r1, [r0, #0x8C]
-
-#ifdef OLD_SDRC_DLLA_CTRL
- /* SDRC_DLLA_CTRL */
- ldr r1, =0x00007306
- str r1, [r0, #0x60]
-
- ldr r1, =0x00007303
- str r1, [r0, #0x60]
-#else
- /* SDRC_DLLA_CTRL */
- ldr r1, =0x00000506
- str r1, [r0, #0x60]
-
- ldr r1, =0x00000503
- str r1, [r0, #0x60]
-#endif
-
-#ifdef __BROKEN_FEATURE__
- /* SDRC_DLLB_CTRL */
- ldr r1, =0x00000506
- str r1, [r0, #0x68]
-
- ldr r1, =0x00000503
- str r1, [r0, #0x68]
-#endif
-
- /* little delay after init */
- mov r2, #0x1800
-1:
- subs r2, r2, #0x1
- bne 1b
-
- /* Setup base address */
- ldr r0, =0x00000000 /* NOR address */
- ldr r1, =SDRAM_BASE_ADDRESS /* SDRAM address */
- ldr r2, =0x20000 /* Size: 128KB */
-
-copy_loop:
- ldmia r0!, {r3-r10}
- stmia r1!, {r3-r10}
- cmp r0, r2
- ble copy_loop
-
- ldr r1, =SDRAM_BASE_ADDRESS
- mov lr, pc
- mov pc, r1
-#endif
-
-prcm_setup:
- ldr r0, =OMAP2420_CM_BASE
- ldr r1, [r0, #0x544] /* CLKSEL2_PLL */
- bic r1, r1, #0x03
- orr r1, r1, #0x02
- str r1, [r0, #0x544]
-
- ldr r1, [r0, #0x500]
- bic r1, r1, #0x03
- orr r1, r1, #0x01
- str r1, [r0, #0x500]
-
- ldr r1, [r0, #0x140]
- bic r1, r1, #0x1f
- orr r1, r1, #0x02
- str r1, [r0, #0x140]
-
-#ifdef PRCM_CONFIG_I
- ldr r1, =0x000003C3
-#else
- ldr r1, =0x00000343
-#endif
- str r1, [r0, #0x840]
-
- ldr r1, =0x00000002
- str r1, [r0, #0x340]
-
- ldr r1, =CM_CLKSEL1_CORE
-#ifdef PRCM_CONFIG_I
- ldr r2, =0x08300C44
-#else
- ldr r2, =0x04600C26
-#endif
- str r2, [r1]
-
- ldr r0, =OMAP2420_CM_BASE
- ldr r1, [r0, #0x084]
- and r1, r1, #0x01
- cmp r1, #0x01
- bne clkvalid
-
- b .
-
-clkvalid:
- mov r1, #0x01
- str r1, [r0, #0x080]
-
-waitvalid:
- ldr r1, [r0, #0x084]
- and r1, r1, #0x01
- cmp r1, #0x00
- bne waitvalid
-
- ldr r0, =CM_CLKSEL1_PLL
-#ifdef PRCM_CONFIG_I
- ldr r1, =0x01837100
-#else
- ldr r1, =0x01832100
-#endif
- str r1, [r0]
-
- ldr r0, =PRCM_CLKCFG_CTRL
- mov r1, #0x01
- str r1, [r0]
- mov r6, #0x50
-loop1:
- subs r6, r6, #0x01
- cmp r6, #0x01
- bne loop1
-
- ldr r0, =CM_CLKEN_PLL
- mov r1, #0x0f
- str r1, [r0]
-
- mov r6, #0x100
-loop2:
- subs r6, r6, #0x01
- cmp r6, #0x01
- bne loop2
-
- ldr r0, =0x48008200
- ldr r1, =0xbfffffff
- str r1, [r0]
-
- ldr r0, =0x48008210
- ldr r1, =0xfffffff9
- str r1, [r0]
-
- ldr r0, =0x4806a004
- ldr r1, =0x00
- strb r1, [r0]
-
- ldr r0, =0x4806a020
- ldr r1, =0x07
- strb r1, [r0]
-
- ldr r0, =0x4806a00c
- ldr r1, =0x83
- strb r1, [r0]
-
- ldr r0, =0x4806a000
- ldr r1, =0x1a
- strb r1, [r0]
-
- ldr r0, =0x4806a004
- ldr r1, =0x00
- strb r1, [r0]
-
- ldr r0, =0x4806a00c
- ldr r1, =0x03
- strb r1, [r0]
-
- ldr r0, =0x4806a010
- ldr r1, =0x03
- strb r1, [r0]
-
- ldr r0, =0x4806a008
- ldr r1, =0x04
- strb r1, [r0]
-
- ldr r0, =0x4806a020
- ldr r1, =0x00
- strb r1, [r0]
-
-#if 0
- ldr r0, =0x4806a000
- mov r1, #'u'
- strb r1, [r0]
-#endif
-
-#if 0
- /* LED0 OFF */
- ldr r3, =0x480000E5
- mov r4, #0x0b
- strb r4, [r3]
-#endif
-
- ldr sp, SRAM_STACK
- str ip, [sp] /* stash old link register */
- mov ip, lr /* save link reg across call */
- bl s_init /* go setup pll,mux,memory */
- ldr ip, [sp] /* restore save ip */
- mov lr, ip /* restore link reg */
-
- /* map interrupt controller */
- ldr r0, VAL_INTH_SETUP
- mcr p15, 0, r0, c15, c2, 4
-
- /* back to arch calling code */
- mov pc, lr
-
- /* the literal pools origin */
- .ltorg
-
-VAL_INTH_SETUP:
- .word PERIFERAL_PORT_BASE
-SRAM_STACK:
- .word LOW_LEVEL_SRAM_STACK
diff --git a/board/apollon/mem.c b/board/apollon/mem.c
deleted file mode 100644
index 36bf6e9..0000000
--- a/board/apollon/mem.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * (C) Copyright 2005-2007
- * Samsung Electronics,
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * Derived from omap2420
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/omap2420.h>
-#include <asm/io.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/mux.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/clocks.h>
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-
-#include "mem.h"
-
-/************************************************************
- * sdelay() - simple spin loop. Will be constant time as
- * its generally used in 12MHz bypass conditions only. This
- * is necessary until timers are accessible.
- *
- * not inline to increase chances its in cache when called
- *************************************************************/
-void sdelay(unsigned long loops)
-{
- __asm__("1:\n" "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0"(loops));
-}
-
-/********************************************************************
- * prcm_init() - inits clocks for PRCM as defined in clocks.h
- * (config II default).
- * -- called from SRAM, or Flash (using temp SRAM stack).
- ********************************************************************/
-void prcm_init(void) { }
-
-/**************************************************************************
- * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow
- * command line mem=xyz use all memory with out discontigious support
- * compiled in. Could do it at the ATAG, but there really is two banks...
- * Called as part of 2nd phase DDR init.
- **************************************************************************/
-void make_cs1_contiguous(void)
-{
- u32 size, a_add_low, a_add_high;
-
- size = get_sdr_cs_size(SDRC_CS0_OSET);
- size /= SZ_32M; /* find size to offset CS1 */
- a_add_high = (size & 3) << 8; /* set up low field */
- a_add_low = (size & 0x3C) >> 2; /* set up high field */
- __raw_writel((a_add_high | a_add_low), SDRC_CS_CFG);
-
-}
-
-/********************************************************
- * mem_ok() - test used to see if timings are correct
- * for a part. Helps in gussing which part
- * we are currently using.
- *******************************************************/
-u32 mem_ok(void)
-{
- u32 val1, val2;
- u32 pattern = 0x12345678;
-
- /* clear pos A */
- __raw_writel(0x0, OMAP2420_SDRC_CS0 + 0x400);
- /* pattern to pos B */
- __raw_writel(pattern, OMAP2420_SDRC_CS0);
- /* remove pattern off the bus */
- __raw_writel(0x0, OMAP2420_SDRC_CS0 + 4);
- /* get pos A value */
- val1 = __raw_readl(OMAP2420_SDRC_CS0 + 0x400);
- val2 = __raw_readl(OMAP2420_SDRC_CS0); /* get val2 */
-
- /* see if pos A value changed */
- if ((val1 != 0) || (val2 != pattern))
- return (0);
- else
- return (1);
-}
-
-/********************************************************
- * sdrc_init() - init the sdrc chip selects CS0 and CS1
- * - early init routines, called from flash or
- * SRAM.
- *******************************************************/
-void sdrc_init(void)
-{
-#define EARLY_INIT 1
- /* only init up first bank here */
- do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT);
-}
-
-/*************************************************************************
- * do_sdrc_init(): initialize the SDRAM for use.
- * -called from low level code with stack only.
- * -code sets up SDRAM timing and muxing for 2422 or 2420.
- * -optimal settings can be placed here, or redone after i2c
- * inspection of board info
- *
- * This is a bit ugly, but should handle all memory moduels
- * used with the APOLLON. The first time though this code from s_init()
- * we configure the first chip select. Later on we come back and
- * will configure the 2nd chip select if it exists.
- *
- **************************************************************************/
-void do_sdrc_init(u32 offset, u32 early)
-{
-}
-
-/*****************************************************
- * gpmc_init(): init gpmc bus
- * Init GPMC for x16, MuxMode (SDRAM in x32).
- * This code can only be executed from SRAM or SDRAM.
- *****************************************************/
-void gpmc_init(void)
-{
- u32 mux = 0, mtype, mwidth, rev, tval;
-
- rev = get_cpu_rev();
- if (rev == CPU_2420_2422_ES1)
- tval = 1;
- else
- tval = 0; /* disable bit switched meaning */
-
- /* global settings */
- __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */
- __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */
- __raw_writel(tval, GPMC_TIMEOUT_CONTROL); /* timeout disable */
-#ifdef CONFIG_SYS_NAND_BOOT
- /* set nWP, disable limited addr */
- __raw_writel(0x001, GPMC_CONFIG);
-#else
- /* set nWP, disable limited addr */
- __raw_writel(0x111, GPMC_CONFIG);
-#endif
-
- /* discover bus connection from sysboot */
- if (is_gpmc_muxed() == GPMC_MUXED)
- mux = BIT9;
- mtype = get_gpmc0_type();
- mwidth = get_gpmc0_width();
-
- /* setup cs0 */
- __raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */
- sdelay(1000);
-
-#ifdef CONFIG_SYS_NOR_BOOT
- __raw_writel(APOLLON_24XX_GPMC_CONFIG1_3, GPMC_CONFIG1_0);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG2_3, GPMC_CONFIG2_0);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG3_3, GPMC_CONFIG3_0);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG4_3, GPMC_CONFIG4_0);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG5_3, GPMC_CONFIG5_0);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG6_3, GPMC_CONFIG6_0);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_0);
-#else
- __raw_writel(APOLLON_24XX_GPMC_CONFIG1_0 | mux | mtype | mwidth,
- GPMC_CONFIG1_0);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_0);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0);
-#endif
- sdelay(2000);
-
- /* setup cs1 */
- __raw_writel(0, GPMC_CONFIG7_1); /* disable any mapping */
- sdelay(1000);
-
- __raw_writel(APOLLON_24XX_GPMC_CONFIG1_1, GPMC_CONFIG1_1);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1);
- sdelay(2000);
-
- /* setup cs2 */
- __raw_writel(0x0, GPMC_CONFIG7_2); /* disable current map */
- sdelay(1000);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG1_0 | mux | mtype | mwidth,
- GPMC_CONFIG1_2);
- /* It's same as cs 0 */
- __raw_writel(APOLLON_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_2);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_2);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_2);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_2);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_2);
-#ifdef CONFIG_SYS_NOR_BOOT
- __raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_2);
-#else
- __raw_writel(APOLLON_24XX_GPMC_CONFIG7_2, GPMC_CONFIG7_2);
-#endif
-
-#ifndef CONFIG_SYS_NOR_BOOT
- /* setup cs3 */
- __raw_writel(0, GPMC_CONFIG7_3); /* disable any mapping */
- sdelay(1000);
-
- __raw_writel(APOLLON_24XX_GPMC_CONFIG1_3, GPMC_CONFIG1_3);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG2_3, GPMC_CONFIG2_3);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG3_3, GPMC_CONFIG3_3);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG4_3, GPMC_CONFIG4_3);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG5_3, GPMC_CONFIG5_3);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG6_3, GPMC_CONFIG6_3);
- __raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_3);
-#endif
-
-#ifndef ASYNC_NOR
- __raw_writew(0xaa, (APOLLON_CS3_BASE + 0xaaa));
- __raw_writew(0x55, (APOLLON_CS3_BASE + 0x554));
- __raw_writew(0xc0, (APOLLON_CS3_BASE | SYNC_NOR_VALUE));
-#endif
- sdelay(2000);
-}
diff --git a/board/apollon/mem.h b/board/apollon/mem.h
deleted file mode 100644
index 09c4ea4..0000000
--- a/board/apollon/mem.h
+++ /dev/null
@@ -1,170 +0,0 @@
-/*
- * (C) Copyright 2005-2007
- * Samsung Electronics,
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _APOLLON_OMAP24XX_MEM_H_
-#define _APOLLON_OMAP24XX_MEM_H_
-
-/* Slower full frequency range default timings for x32 operation*/
-#define APOLLON_2420_SDRC_SHARING 0x00000100
-#define APOLLON_2420_SDRC_MDCFG_0_DDR 0x00d04011
-#define APOLLON_2420_SDRC_MR_0_DDR 0x00000032
-
-/* optimized timings good for current shipping parts */
-#define APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x4A59B485
-#define APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000C
-
-#define APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz 0x7BA35907
-#define APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz 0x00000013
-
-#define APOLLON_242X_SDRC_RFR_CTRL_100MHz 0x00030001
-#define APOLLON_242X_SDRC_RFR_CTRL_166MHz 0x00044C01
-
-#define APOLLON_242x_SDRC_DLLAB_CTRL_100MHz 0x00007306
-#define APOLLON_242x_SDRC_DLLAB_CTRL_166MHz 0x00000506
-
-#ifdef PRCM_CONFIG_I
-#define APOLLON_2420_SDRC_ACTIM_CTRLA_0 APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz
-#define APOLLON_2420_SDRC_ACTIM_CTRLB_0 APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz
-#define APOLLON_2420_SDRC_RFR_CTRL APOLLON_242X_SDRC_RFR_CTRL_166MHz
-#define APOLLON_2420_SDRC_DLLAB_CTRL APOLLON_242x_SDRC_DLLAB_CTRL_166MHz
-#elif PRCM_CONFIG_II
-#define APOLLON_2420_SDRC_ACTIM_CTRLA_0 APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz
-#define APOLLON_2420_SDRC_ACTIM_CTRLB_0 APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz
-#define APOLLON_2420_SDRC_RFR_CTRL APOLLON_242X_SDRC_RFR_CTRL_100MHz
-#define APOLLON_2420_SDRC_DLLAB_CTRL APOLLON_242x_SDRC_DLLAB_CTRL_100MHz
-#endif
-
-/* GPMC settings */
-#ifdef PRCM_CONFIG_I /* L3 at 165MHz */
-/* CS0: OneNAND */
-# define APOLLON_24XX_GPMC_CONFIG1_0 0x00000001
-# define APOLLON_24XX_GPMC_CONFIG2_0 0x000c1000
-# define APOLLON_24XX_GPMC_CONFIG3_0 0x00030400
-# define APOLLON_24XX_GPMC_CONFIG4_0 0x0b841006
-# define APOLLON_24XX_GPMC_CONFIG5_0 0x020f0c11
-# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000000
-# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000e40|(APOLLON_CS0_BASE >> 24))
-
-/* CS1: Ethernet */
-# define APOLLON_24XX_GPMC_CONFIG1_1 0x00011203
-# define APOLLON_24XX_GPMC_CONFIG2_1 0x001F1F01
-# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803
-# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C0b1C0a
-# define APOLLON_24XX_GPMC_CONFIG5_1 0x041F1F1F
-# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4
-# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24))
-
-/* CS2: OneNAND */
-/* It's same as CS0 */
-# define APOLLON_24XX_GPMC_CONFIG7_2 (0x00000e40|(APOLLON_CS2_BASE >> 24))
-
-/* CS3: NOR */
-#ifdef ASYNC_NOR
-# define APOLLON_24XX_GPMC_CONFIG1_3 0x00021201
-# define APOLLON_24XX_GPMC_CONFIG2_3 0x00121601
-# define APOLLON_24XX_GPMC_CONFIG3_3 0x00040401
-# define APOLLON_24XX_GPMC_CONFIG4_3 0x12061605
-# define APOLLON_24XX_GPMC_CONFIG5_3 0x01151317
-#else
-# define SYNC_NOR_VALUE 0x24aaa
-# define APOLLON_24XX_GPMC_CONFIG1_3 0xe5011211
-# define APOLLON_24XX_GPMC_CONFIG2_3 0x00090b01
-# define APOLLON_24XX_GPMC_CONFIG3_3 0x00020201
-# define APOLLON_24XX_GPMC_CONFIG4_3 0x09030b03
-# define APOLLON_24XX_GPMC_CONFIG5_3 0x010a0a0c
-#endif /* ASYNC_NOR */
-# define APOLLON_24XX_GPMC_CONFIG6_3 0x00000000
-# define APOLLON_24XX_GPMC_CONFIG7_3 (0x00000e40|(APOLLON_CS3_BASE >> 24))
-#endif /* endif PRCM_CONFIG_I */
-
-#ifdef PRCM_CONFIG_II /* L3 at 100MHz */
-/* CS0: OneNAND */
-# define APOLLON_24XX_GPMC_CONFIG1_0 0x00000001
-# define APOLLON_24XX_GPMC_CONFIG2_0 0x00081080
-# define APOLLON_24XX_GPMC_CONFIG3_0 0x00030300
-# define APOLLON_24XX_GPMC_CONFIG4_0 0x08041004
-# define APOLLON_24XX_GPMC_CONFIG5_0 0x020b0910
-# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000000
-# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000C40|(APOLLON_CS0_BASE >> 24))
-
-/* CS1: ethernet */
-# define APOLLON_24XX_GPMC_CONFIG1_1 0x00401203
-# define APOLLON_24XX_GPMC_CONFIG2_1 0x001F1F01
-# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803
-# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C091C09
-# define APOLLON_24XX_GPMC_CONFIG5_1 0x041F1F1F
-# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4
-# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24))
-
-/* CS2: OneNAND */
-/* It's same as CS0 */
-# define APOLLON_24XX_GPMC_CONFIG7_2 (0x00000e40|(APOLLON_CS2_BASE >> 24))
-
-/* CS3: NOR */
-#define ASYNC_NOR
-#ifdef ASYNC_NOR
-# define APOLLON_24XX_GPMC_CONFIG1_3 0x00021201
-# define APOLLON_24XX_GPMC_CONFIG2_3 0x00121601
-# define APOLLON_24XX_GPMC_CONFIG3_3 0x00040401
-# define APOLLON_24XX_GPMC_CONFIG4_3 0x12061605
-# define APOLLON_24XX_GPMC_CONFIG5_3 0x01151317
-#else
-# define SYNC_NOR_VALUE 0x24aaa
-# define APOLLON_24XX_GPMC_CONFIG1_3 0xe1001202
-# define APOLLON_24XX_GPMC_CONFIG2_3 0x00151501
-# define APOLLON_24XX_GPMC_CONFIG3_3 0x00050501
-# define APOLLON_24XX_GPMC_CONFIG4_3 0x0e070e07
-# define APOLLON_24XX_GPMC_CONFIG5_3 0x01131F1F
-#endif /* ASYNC_NOR */
-# define APOLLON_24XX_GPMC_CONFIG6_3 0x00000000
-# define APOLLON_24XX_GPMC_CONFIG7_3 (0x00000C40|(APOLLON_CS3_BASE >> 24))
-#endif /* endif PRCM_CONFIG_II */
-
-#ifdef PRCM_CONFIG_III /* L3 at 133MHz */
-# ifdef CONFIG_SYS_NAND_BOOT
-# define APOLLON_24XX_GPMC_CONFIG1_0 0x0
-# define APOLLON_24XX_GPMC_CONFIG2_0 0x00141400
-# define APOLLON_24XX_GPMC_CONFIG3_0 0x00141400
-# define APOLLON_24XX_GPMC_CONFIG4_0 0x0F010F01
-# define APOLLON_24XX_GPMC_CONFIG5_0 0x010C1414
-# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000A80
-# else /* NOR boot */
-# define APOLLON_24XX_GPMC_CONFIG1_0 0x3
-# define APOLLON_24XX_GPMC_CONFIG2_0 0x00151501
-# define APOLLON_24XX_GPMC_CONFIG3_0 0x00060602
-# define APOLLON_24XX_GPMC_CONFIG4_0 0x10081008
-# define APOLLON_24XX_GPMC_CONFIG5_0 0x01131F1F
-# define APOLLON_24XX_GPMC_CONFIG6_0 0x000004c4
-# endif /* endif CONFIG_SYS_NAND_BOOT */
-# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000C40|(APOLLON_CS0_BASE >> 24))
-# define APOLLON_24XX_GPMC_CONFIG1_1 0x00011000
-# define APOLLON_24XX_GPMC_CONFIG2_1 0x001f1f01
-# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803
-# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C091C09
-# define APOLLON_24XX_GPMC_CONFIG5_1 0x041f1F1F
-# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4
-# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24))
-#endif /* endif CONFIG_SYS_PRCM_III */
-
-#endif /* endif _APOLLON_OMAP24XX_MEM_H_ */
diff --git a/board/apollon/sys_info.c b/board/apollon/sys_info.c
deleted file mode 100644
index 4f950ae..0000000
--- a/board/apollon/sys_info.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * (C) Copyright 2005-2007
- * Samsung Electronics,
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * Derived from omap2420
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/omap2420.h>
-#include <asm/io.h>
-#include <asm/arch/bits.h>
-#include <asm/arch/mem.h> /* get mem tables */
-#include <asm/arch/sys_proto.h>
-#include <asm/arch/sys_info.h>
-#include <i2c.h>
-
-/**************************************************************************
- * get_prod_id() - get id info from chips
- ***************************************************************************/
-static u32 get_prod_id(void)
-{
- u32 p;
- p = __raw_readl(PRODUCTION_ID); /* get production ID */
- return ((p & CPU_242X_PID_MASK) >> 16);
-}
-
-/**************************************************************************
- * get_cpu_type() - low level get cpu type
- * - no C globals yet.
- * - just looking to say if this is a 2422 or 2420 or ...
- * - to start with we will look at switch settings..
- * - 2422 id's same as 2420 for ES1 will rely on H4 board characteristics
- * (mux for 2420, non-mux for 2422).
- ***************************************************************************/
-u32 get_cpu_type(void)
-{
- u32 v;
-
- switch (get_prod_id()) {
- case 1:; /* 2420 */
- case 2:
- return (CPU_2420);
- break; /* 2420 pop */
- case 4:
- return (CPU_2422);
- break;
- case 8:
- return (CPU_2423);
- break;
- default:
- break; /* early 2420/2422's unmarked */
- }
-
- v = __raw_readl(TAP_IDCODE_REG);
- v &= CPU_24XX_ID_MASK;
- /* currently 2420 and 2422 have same id */
- if (v == CPU_2420_CHIPID) {
- if (is_gpmc_muxed() == GPMC_MUXED) /* if mux'ed */
- return (CPU_2420);
- else
- return (CPU_2422);
- } else
- return (CPU_2420); /* don't know, say 2420 */
-}
-
-/******************************************
- * get_cpu_rev(void) - extract version info
- ******************************************/
-u32 get_cpu_rev(void)
-{
- u32 v;
- v = __raw_readl(TAP_IDCODE_REG);
- v = v >> 28;
- return (v + 1); /* currently 2422 and 2420 match up */
-}
-
-/****************************************************
- * is_mem_sdr() - return 1 if mem type in use is SDR
- ****************************************************/
-u32 is_mem_sdr(void)
-{
- volatile u32 *burst = (volatile u32 *)(SDRC_MR_0 + SDRC_CS0_OSET);
- if (*burst == H4_2420_SDRC_MR_0_SDR)
- return (1);
- return (0);
-}
-
-/***********************************************************
- * get_mem_type() - identify type of mDDR part used.
- * 2422 uses stacked DDR, 2 parts CS0/CS1.
- * 2420 may have 1 or 2, no good way to know...only init 1...
- * when eeprom data is up we can select 1 more.
- *************************************************************/
-u32 get_mem_type(void)
-{
- u32 cpu, sdr = is_mem_sdr();
-
- cpu = get_cpu_type();
- if (cpu == CPU_2422 || cpu == CPU_2423)
- return (DDR_STACKED);
-
- if (get_prod_id() == 0x2)
- return (XDR_POP);
-
- if (get_board_type() == BOARD_H4_MENELAUS)
- if (sdr)
- return (SDR_DISCRETE);
- else
- return (DDR_COMBO);
- else if (sdr) /* SDP + SDR kit */
- return (SDR_DISCRETE);
- else
- return (DDR_DISCRETE); /* origional SDP */
-}
-
-/***********************************************************************
- * get_cs0_size() - get size of chip select 0/1
- ************************************************************************/
-u32 get_sdr_cs_size(u32 offset)
-{
- u32 size;
- size = __raw_readl(SDRC_MCFG_0 + offset) >> 8; /* get ram size field */
- size &= 0x2FF; /* remove unwanted bits */
- size *= SZ_2M; /* find size in MB */
- return (size);
-}
-
-/***********************************************************************
- * get_board_type() - get board type based on current production stats.
- * --- NOTE: 2 I2C EEPROMs will someday be populated with proper info.
- * when they are available we can get info from there. This should
- * be correct of all known boards up until today.
- ************************************************************************/
-u32 get_board_type(void)
-{
- return (BOARD_H4_SDP);
-}
-
-/******************************************************************
- * get_sysboot_value() - get init word settings (dip switch on h4)
- ******************************************************************/
-inline u32 get_sysboot_value(void)
-{
- return (0x00000FFF & __raw_readl(CONTROL_STATUS));
-}
-
-/***************************************************************************
- * get_gpmc0_base() - Return current address hardware will be
- * fetching from. The below effectively gives what is correct, its a bit
- * mis-leading compared to the TRM. For the most general case the mask
- * needs to be also taken into account this does work in practice.
- * - for u-boot we currently map:
- * -- 0 to nothing,
- * -- 4 to flash
- * -- 8 to enent
- * -- c to wifi
- ****************************************************************************/
-u32 get_gpmc0_base(void)
-{
- u32 b;
-
- b = __raw_readl(GPMC_CONFIG7_0);
- b &= 0x1F; /* keep base [5:0] */
- b = b << 24; /* ret 0x0b000000 */
- return (b);
-}
-
-/*****************************************************************
- * is_gpmc_muxed() - tells if address/data lines are multiplexed
- *****************************************************************/
-u32 is_gpmc_muxed(void)
-{
- u32 mux;
- mux = get_sysboot_value();
- if ((mux & (BIT0 | BIT1 | BIT2 | BIT3)) == (BIT0 | BIT2 | BIT3))
- return (GPMC_MUXED); /* NAND Boot mode */
- if (mux & BIT1) /* if mux'ed */
- return (GPMC_MUXED);
- else
- return (GPMC_NONMUXED);
-}
-
-/************************************************************************
- * get_gpmc0_type() - read sysboot lines to see type of memory attached
- ************************************************************************/
-u32 get_gpmc0_type(void)
-{
- u32 type;
- type = get_sysboot_value();
- if ((type & (BIT3 | BIT2)) == (BIT3 | BIT2))
- return (TYPE_NAND);
- else
- return (TYPE_NOR);
-}
-
-/*******************************************************************
- * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand)
- *******************************************************************/
-u32 get_gpmc0_width(void)
-{
- u32 width;
- width = get_sysboot_value();
- if ((width & 0xF) == (BIT3 | BIT2))
- return (WIDTH_8BIT);
- else
- return (WIDTH_16BIT);
-}
-
-/*********************************************************************
- * wait_on_value() - common routine to allow waiting for changes in
- * volatile regs.
- *********************************************************************/
-u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound)
-{
- u32 i = 0, val;
- do {
- ++i;
- val = __raw_readl(read_addr) & read_bit_mask;
- if (val == match_value)
- return (1);
- if (i == bound)
- return (0);
- } while (1);
-}
-
-/*********************************************************************
- * display_board_info() - print banner with board info.
- *********************************************************************/
-void display_board_info(u32 btype)
-{
- char cpu_2420[] = "2420"; /* cpu type */
- char cpu_2422[] = "2422";
- char cpu_2423[] = "2423";
- char mem_sdr[] = "mSDR"; /* memory type */
- char mem_ddr[] = "mDDR";
- char t_tst[] = "TST"; /* security level */
- char t_emu[] = "EMU";
- char t_hs[] = "HS";
- char t_gp[] = "GP";
- char unk[] = "?";
-
- char *cpu_s, *mem_s, *sec_s;
- u32 cpu, rev, sec;
-
- rev = get_cpu_rev();
- cpu = get_cpu_type();
- sec = get_device_type();
-
- if (is_mem_sdr())
- mem_s = mem_sdr;
- else
- mem_s = mem_ddr;
-
- if (cpu == CPU_2423)
- cpu_s = cpu_2423;
- else if (cpu == CPU_2422)
- cpu_s = cpu_2422;
- else
- cpu_s = cpu_2420;
-
- switch (sec) {
- case TST_DEVICE:
- sec_s = t_tst;
- break;
- case EMU_DEVICE:
- sec_s = t_emu;
- break;
- case HS_DEVICE:
- sec_s = t_hs;
- break;
- case GP_DEVICE:
- sec_s = t_gp;
- break;
- default:
- sec_s = unk;
- }
-
- printf("OMAP%s-%s revision %d\n", cpu_s, sec_s, rev - 1);
- printf("Samsung Apollon SDP Base Board + %s \n", mem_s);
-}
-
-/*************************************************************************
- * get_board_rev() - setup to pass kernel board revision information
- * 0 = 242x IP platform (first 2xx boards)
- * 1 = 242x Menelaus platfrom.
- *************************************************************************/
-u32 get_board_rev(void)
-{
- u32 rev = 0;
- u32 btype = get_board_type();
-
- if (btype == BOARD_H4_MENELAUS)
- rev = 1;
- return (rev);
-}
-
-/********************************************************
- * get_base(); get upper addr of current execution
- *******************************************************/
-u32 get_base(void)
-{
- u32 val;
- __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
- val &= 0xF0000000;
- val >>= 28;
- return (val);
-}
-
-/********************************************************
- * get_base2(); get 2upper addr of current execution
- *******************************************************/
-u32 get_base2(void)
-{
- u32 val;
- __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory");
- val &= 0xFF000000;
- val >>= 24;
- return (val);
-}
-
-/********************************************************
- * running_in_flash() - tell if currently running in
- * flash.
- *******************************************************/
-u32 running_in_flash(void)
-{
- if (get_base() < 4)
- return (1); /* in flash */
- return (0); /* running in SRAM or SDRAM */
-}
-
-/********************************************************
- * running_in_sram() - tell if currently running in
- * sram.
- *******************************************************/
-u32 running_in_sram(void)
-{
- if (get_base() == 4)
- return (1); /* in SRAM */
- return (0); /* running in FLASH or SDRAM */
-}
-
-/********************************************************
- * running_in_sdram() - tell if currently running in
- * flash.
- *******************************************************/
-u32 running_in_sdram(void)
-{
- if (get_base() > 4)
- return (1); /* in sdram */
- return (0); /* running in SRAM or FLASH */
-}
-
-/*************************************************************
- * running_from_internal_boot() - am I a signed NOR image.
- *************************************************************/
-u32 running_from_internal_boot(void)
-{
- u32 v, base;
-
- v = get_sysboot_value() & BIT3;
- base = get_base2();
- /* if running at mask rom flash address and
- * sysboot3 says this was an internal boot
- */
- if ((base == 0x08) && v)
- return (1);
- else
- return (0);
-}
-
-/*************************************************************
- * get_device_type(): tell if GP/HS/EMU/TST
- *************************************************************/
-u32 get_device_type(void)
-{
- int mode;
- mode = __raw_readl(CONTROL_STATUS) & (BIT10 | BIT9 | BIT8);
- return (mode >>= 8);
-}
diff --git a/boards.cfg b/boards.cfg
index ea5c7a9..b4e0d3c 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -50,7 +50,6 @@ tt01 arm arm1136 - hale
imx31_litekit arm arm1136 - logicpd mx31
flea3 arm arm1136 - CarMediaLab mx35
mx35pdk arm arm1136 - freescale mx35
-apollon arm arm1136 apollon - omap24xx
omap2420h4 arm arm1136 - ti omap24xx
tnetv107x_evm arm arm1176 tnetv107xevm ti tnetv107x
rpi_b arm arm1176 rpi_b raspberrypi bcm2835
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index 4b5558d..5929a8e 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
Board Arch CPU removed Commit last known maintainer/contact
=============================================================================
+apollon arm omap24xx - 2012-09-06 Kyungmin Park <kyungmin.park@samsung.com>
tb0229 mips mips32 - 2011-12-12
rmu powerpc MPC850 fb82fd7 2011-12-07 Wolfgang Denk <wd@denx.de>
OXC powerpc MPC8240 309a292 2011-12-07
diff --git a/include/configs/apollon.h b/include/configs/apollon.h
deleted file mode 100644
index b8ca8a8..0000000
--- a/include/configs/apollon.h
+++ /dev/null
@@ -1,261 +0,0 @@
-/*
- * (C) Copyright 2005-2008
- * Samsung Electronics,
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * Configuration settings for the 2420 Samsung Apollon board.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_ARM1136 1 /* This is an arm1136 CPU core */
-#define CONFIG_OMAP 1 /* in a TI OMAP core */
-#define CONFIG_OMAP2420 1 /* which is in a 2420 */
-#define CONFIG_OMAP2420_APOLLON 1
-#define CONFIG_APOLLON 1
-#define CONFIG_APOLLON_PLUS 1 /* If you have apollon plus 1.x */
-
-#define CONFIG_ONENAND_U_BOOT y
-
-/* Clock config to target*/
-#define PRCM_CONFIG_I 1
-/* #define PRCM_CONFIG_II 1 */
-
-/* Boot method */
-/* uncomment if you use NOR boot */
-/* #define CONFIG_SYS_NOR_BOOT 1 */
-
-/* uncomment if you use NOR on CS3 */
-/* #define CONFIG_SYS_USE_NOR 1 */
-
-#ifdef CONFIG_SYS_NOR_BOOT
-#undef CONFIG_SYS_USE_NOR
-#define CONFIG_SYS_USE_NOR 1
-#endif
-
-/* uncommnet if you want to use UBI */
-#define CONFIG_SYS_USE_UBI
-
-#include <asm/arch/omap2420.h> /* get chip and board defs */
-
-#define V_SCLK 12000000
-
-/* input clock of PLL */
-/* the OMAP2420 H4 has 12MHz, 13MHz, or 19.2Mhz crystal input */
-#define CONFIG_SYS_CLK_FREQ V_SCLK
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG 1
-#define CONFIG_REVISION_TAG 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_ENV_SIZE SZ_128K /* Total Size of Environment Sector */
-#define CONFIG_ENV_SIZE_FLEX SZ_256K
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + SZ_1M)
-
-/*
- * Hardware drivers
- */
-
-/*
- * SMC91c96 Etherent
- */
-#define CONFIG_LAN91C96
-#define CONFIG_LAN91C96_BASE (APOLLON_CS1_BASE+0x300)
-#define CONFIG_LAN91C96_EXT_PHY
-
-/*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK (48000000) /* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE (-4)
-#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK /* 3MHz (1.5MHz*2) */
-#define CONFIG_SYS_NS16550_COM1 OMAP2420_UART1
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1 1 /* UART1 on H4 */
-
-/* allow to overwrite serial and ethaddr */
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 115200
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_ONENAND
-
-#ifdef CONFIG_SYS_USE_UBI
-#define CONFIG_CMD_JFFS2
-#define CONFIG_CMD_UBI
-#define CONFIG_RBTREE
-#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
-#define CONFIG_MTD_PARTITIONS
-#endif
-
-#undef CONFIG_CMD_SOURCE
-
-#ifndef CONFIG_SYS_USE_NOR
-# undef CONFIG_CMD_FLASH
-# undef CONFIG_CMD_IMLS
-#endif
-
-#define CONFIG_BOOTP_MASK CONFIG_BOOTP_DEFAULT
-
-#define CONFIG_BOOTDELAY 1
-
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.116.25
-#define CONFIG_SERVERIP 192.168.116.1
-#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_ETHADDR 00:0E:99:00:24:20
-
-#ifdef CONFIG_APOLLON_PLUS
-#define CONFIG_SYS_MEM "mem=64M"
-#else
-#define CONFIG_SYS_MEM "mem=128"
-#endif
-
-#ifdef CONFIG_SYS_USE_UBI
-#define CONFIG_SYS_UBI "ubi.mtd=4"
-#else
-#define CONFIG_SYS_UBI ""
-#endif
-
-#define CONFIG_BOOTARGS "root=/dev/nfs rw " CONFIG_SYS_MEM \
- " console=ttyS0,115200n8" \
- " ip=192.168.116.25:192.168.116.1:192.168.116.1:255.255.255.0:" \
- "apollon:eth0:off nfsroot=/tftpboot/nfsroot profile=2 " \
- CONFIG_SYS_UBI
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "Image=tftp 0x80008000 Image; go 0x80008000\0" \
- "zImage=tftp 0x80180000 zImage; go 0x80180000\0" \
- "uImage=tftp 0x80180000 uImage; bootm 0x80180000\0" \
- "uboot=tftp 0x80008000 u-boot.bin; go 0x80008000\0" \
- "xloader=tftp 0x80180000 x-load.bin; " \
- " cp.w 0x80180000 0x00000400 0x1000; go 0x00000400\0" \
- "syncmode50=mw.w 0x1e442 0xc0c4; mw 0x6800a060 0xe30d1201\0" \
- "syncmode=mw.w 0x1e442 0xe0f4; mw 0x6800a060 0xe30d1201\0" \
- "norboot=cp32 0x18040000 0x80008000 0x200000; go 0x80008000\0" \
- "oneboot=onenand read 0x80008000 0x40000 0x200000; go 0x80008000\0" \
- "onesyncboot=run syncmode oneboot\0" \
- "updateb=tftp 0x80180000 u-boot-onenand.bin; " \
- " onenand erase 0x0 0x20000; onenand write 0x80180000 0x0 0x20000\0" \
- "ubi=setenv bootargs ${bootargs} ubi.mtd=4 ${mtdparts}; run uImage\0" \
- "bootcmd=run uboot\0"
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "Apollon # "
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-/* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-/* memtest works on */
-#define CONFIG_SYS_MEMTEST_START (OMAP2420_SDRC_CS0)
-#define CONFIG_SYS_MEMTEST_END (OMAP2420_SDRC_CS0+SZ_31M)
-
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR (OMAP2420_SDRC_CS0)
-
-/* The 2420 has 12 GP timers, they can be driven by the SysClk (12/13/19.2)
- * or by 32KHz clk, or from external sig. This rate is divided by a local
- * divisor.
- */
-#define CONFIG_SYS_TIMERBASE OMAP2420_GPT2
-#define CONFIG_SYS_PTV 7 /* 2^(PTV+1) */
-#define CONFIG_SYS_HZ ((CONFIG_SYS_CLK_FREQ)/(2 << CONFIG_SYS_PTV))
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS 1 /* CS1 may or may not be populated */
-#define PHYS_SDRAM_1 OMAP2420_SDRC_CS0
-#define PHYS_SDRAM_1_SIZE SZ_128M
-#define PHYS_SDRAM_2 OMAP2420_SDRC_CS1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#ifdef CONFIG_SYS_USE_NOR
-/* OneNAND boot, NOR has CS3, But NOR has CS0 when NOR boot */
-# define CONFIG_SYS_FLASH_BASE 0x18000000
-# define CONFIG_SYS_MAX_FLASH_BANKS 1
-# define CONFIG_SYS_MAX_FLASH_SECT 1024
-/*-----------------------------------------------------------------------
- * CFI FLASH driver setup
- */
-/* Flash memory is CFI compliant */
-# define CONFIG_SYS_FLASH_CFI 1
-# define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
-/* Use buffered writes (~10x faster) */
-/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 */
-/* Use h/w sector protection*/
-# define CONFIG_SYS_FLASH_PROTECTION 1
-
-#else /* !CONFIG_SYS_USE_NOR */
-# define CONFIG_SYS_NO_FLASH 1
-#endif /* CONFIG_SYS_USE_NOR */
-
-/* OneNAND boot, OneNAND has CS0, NOR boot ONeNAND has CS2 */
-#define CONFIG_SYS_ONENAND_BASE 0x00000000
-#define CONFIG_SYS_MONITOR_LEN SZ_256K /* U-Boot image size */
-#define CONFIG_ENV_IS_IN_ONENAND 1
-#define CONFIG_ENV_ADDR 0x00020000
-#define CONFIG_ENV_ADDR_FLEX 0x00040000
-
-#ifdef CONFIG_SYS_USE_UBI
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT "onenand0=onenand"
-#define MTDPARTS_DEFAULT "mtdparts=onenand:128k(bootloader)," \
- "128k(params)," \
- "2m(kernel)," \
- "16m(rootfs)," \
- "32m(fs)," \
- "-(ubifs)"
-#endif
-
-#define PHYS_SRAM 0x4020F800
-#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM
-
-#endif /* __CONFIG_H */
diff --git a/onenand_ipl/board/apollon/Makefile b/onenand_ipl/board/apollon/Makefile
deleted file mode 100644
index 3bc9920..0000000
--- a/onenand_ipl/board/apollon/Makefile
+++ /dev/null
@@ -1,87 +0,0 @@
-
-include $(TOPDIR)/config.mk
-include $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/config.mk
-
-LDSCRIPT= $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/u-boot.onenand.lds
-LDFLAGS = -Bstatic -T $(onenandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
-AFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_ONENAND_IPL
-CFLAGS += -DCONFIG_SPL_BUILD -DCONFIG_ONENAND_IPL
-OBJCFLAGS += --gap-fill=0x00
-
-SOBJS := low_levelinit.o
-SOBJS += start.o
-COBJS := apollon.o
-COBJS += onenand_read.o
-COBJS += onenand_boot.o
-
-SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-__OBJS := $(SOBJS) $(COBJS)
-LNDIR := $(OBJTREE)/onenand_ipl/board/$(BOARDDIR)
-
-onenandobj := $(OBJTREE)/onenand_ipl/
-
-ALL = $(onenandobj)onenand-ipl $(onenandobj)onenand-ipl.bin $(onenandobj)onenand-ipl-2k.bin $(onenandobj)onenand-ipl-4k.bin
-
-all: $(obj).depend $(ALL)
-
-$(onenandobj)onenand-ipl-2k.bin: $(onenandobj)onenand-ipl
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=0x800 -O binary $< $@
-
-$(onenandobj)onenand-ipl-4k.bin: $(onenandobj)onenand-ipl
- $(OBJCOPY) ${OBJCFLAGS} --pad-to=0x1000 -O binary $< $@
-
-$(onenandobj)onenand-ipl.bin: $(onenandobj)onenand-ipl
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
-$(onenandobj)onenand-ipl: $(OBJS) $(onenandobj)u-boot.lds
- cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
- -Map $@.map -o $@
-
-$(onenandobj)u-boot.lds: $(LDSCRIPT)
- $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
-
-# create symbolic links from common files
-
-# from cpu directory
-$(obj)start.S:
- @rm -f $@
- ln -s $(SRCTREE)/$(CPUDIR)/start.S $@
-
-# from onenand_ipl directory
-$(obj)onenand_ipl.h:
- @rm -f $@
- ln -s $(SRCTREE)/onenand_ipl/onenand_ipl.h $@
-
-$(obj)onenand_boot.c: $(obj)onenand_ipl.h
- @rm -f $@
- ln -s $(SRCTREE)/onenand_ipl/onenand_boot.c $@
-
-$(obj)onenand_read.c: $(obj)onenand_ipl.h
- @rm -f $@
- ln -s $(SRCTREE)/onenand_ipl/onenand_read.c $@
-
-ifneq ($(OBJTREE), $(SRCTREE))
-$(obj)apollon.c:
- @rm -f $@
- ln -s $(SRCTREE)/onenand_ipl/board/$(BOARDDIR)/apollon.c $@
-
-$(obj)low_levelinit.S:
- @rm -f $@
- ln -s $(SRCTREE)/onenand_ipl/board/$(BOARDDIR)/low_levelinit.S $@
-endif
-
-#########################################################################
-
-$(obj)%.o: $(obj)%.S
- $(CC) $(AFLAGS) -c -o $@ $<
-
-$(obj)%.o: $(obj)$.c
- $(CC) $(CFLAGS) -c -o $@ $<
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/onenand_ipl/board/apollon/apollon.c b/onenand_ipl/board/apollon/apollon.c
deleted file mode 100644
index 4936e00..0000000
--- a/onenand_ipl/board/apollon/apollon.c
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * (C) Copyright 2005-2008 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#include <common.h>
-#include <asm/arch/mux.h>
-
-#define write_config_reg(reg, value) \
-do { \
- writeb(value, reg); \
-} while (0)
-
-/*****************************************
- * Routine: board_init
- * Description: Early hardware init.
- *****************************************/
-int board_init(void)
-{
- return 0;
-}
-
-#ifdef CONFIG_SYS_PRINTF
-/* Pin Muxing registers used for UART1 */
-/****************************************
- * Routine: muxSetupUART1 (ostboot)
- * Description: Set up uart1 muxing
- *****************************************/
-static void muxSetupUART1(void)
-{
- /* UART1_CTS pin configuration, PIN = D21 */
- write_config_reg(CONTROL_PADCONF_UART1_CTS, 0);
- /* UART1_RTS pin configuration, PIN = H21 */
- write_config_reg(CONTROL_PADCONF_UART1_RTS, 0);
- /* UART1_TX pin configuration, PIN = L20 */
- write_config_reg(CONTROL_PADCONF_UART1_TX, 0);
- /* UART1_RX pin configuration, PIN = T21 */
- write_config_reg(CONTROL_PADCONF_UART1_RX, 0);
-}
-#endif
-
-/**********************************************************
- * Routine: s_init
- * Description: Does early system init of muxing and clocks.
- * - Called at time when only stack is available.
- **********************************************************/
-int s_init(int skip)
-{
-#ifdef CONFIG_SYS_PRINTF
- muxSetupUART1();
-#endif
- return 0;
-}
diff --git a/onenand_ipl/board/apollon/config.mk b/onenand_ipl/board/apollon/config.mk
deleted file mode 100644
index 62956e8..0000000
--- a/onenand_ipl/board/apollon/config.mk
+++ /dev/null
@@ -1,14 +0,0 @@
-#
-# (C) Copyright 2005-2008 Samsung Electronics
-# Kyungmin Park <kyungmin.park@samsung.com>
-#
-# Samsung Apollon board with OMAP2420 (ARM1136) cpu
-#
-# Apollon has 1 bank of 128MB mDDR-SDRAM on CS0
-# Physical Address:
-# 8000'0000 (bank0)
-# 8800'0000 (bank1)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-CONFIG_SYS_TEXT_BASE = 0x00000000
diff --git a/onenand_ipl/board/apollon/low_levelinit.S b/onenand_ipl/board/apollon/low_levelinit.S
deleted file mode 100644
index cab4227..0000000
--- a/onenand_ipl/board/apollon/low_levelinit.S
+++ /dev/null
@@ -1,205 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2005-2008 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * Derived from board/omap2420h4/platform.S
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <asm/arch/omap2420.h>
-#include <asm/arch/mem.h>
-#include <asm/arch/clocks.h>
-
-#define APOLLON_CS0_BASE 0x00000000
-
-#ifdef PRCM_CONFIG_I
-#define SDRC_ACTIM_CTRLA_0_VAL 0x7BA35907
-#define SDRC_ACTIM_CTRLB_0_VAL 0x00000013
-#define SDRC_RFR_CTRL_0_VAL 0x00044C01
-
-/* GPMC */
-#define APOLLON_GPMC_CONFIG1_0 0xe30d1201
-#define APOLLON_GPMC_CONFIG2_0 0x000c1000
-#define APOLLON_GPMC_CONFIG3_0 0x00030400
-#define APOLLON_GPMC_CONFIG4_0 0x0B841006
-#define APOLLON_GPMC_CONFIG5_0 0x020F0C11
-#define APOLLON_GPMC_CONFIG6_0 0x00000000
-#define APOLLON_GPMC_CONFIG7_0 (0x00000e40 | (APOLLON_CS0_BASE >> 24))
-
-#elif defined(PRCM_CONFIG_II)
-#define SDRC_ACTIM_CTRLA_0_VAL 0x4A59B485
-#define SDRC_ACTIM_CTRLB_0_VAL 0x0000000C
-#define SDRC_RFR_CTRL_0_VAL 0x00030001
-
-/* GPMC */
-#define APOLLON_GPMC_CONFIG1_0 0xe30d1201
-#define APOLLON_GPMC_CONFIG2_0 0x00080E81
-#define APOLLON_GPMC_CONFIG3_0 0x00030400
-#define APOLLON_GPMC_CONFIG4_0 0x08041586
-#define APOLLON_GPMC_CONFIG5_0 0x020C090E
-#define APOLLON_GPMC_CONFIG6_0 0x00000000
-#define APOLLON_GPMC_CONFIG7_0 (0x00000e40 | (APOLLON_CS0_BASE >> 24))
-
-#else
-#error "Please configure PRCM schecm"
-#endif
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
-
-.globl lowlevel_init
-lowlevel_init:
- mov r3, r0 /* save skip information */
-
- /* Disable watchdog */
- ldr r0, =WD2_BASE
- ldr r1, =WD_UNLOCK1
- str r1, [r0, #WSPR]
-
- ldr r1, =WD_UNLOCK2
- str r1, [r0, #WSPR]
-
-#ifdef DEBUG_LED
- /* LED0 OFF */
- ldr r0, =0x480000E5 /* ball AA10, mode 3 */
- mov r1, #0x0b
- strb r1, [r0]
-#endif
-
- /* Pin muxing for SDRC */
- mov r1, #0x00
- ldr r0, =0x480000A1 /* ball C12, mode 0 */
- strb r1, [r0]
-
- ldr r0, =0x48000032 /* ball D11, mode 0 */
- strb r1, [r0]
-
- ldr r0, =0x480000A3 /* ball B13, mode 0 */
- strb r1, [r0]
-
- /* SDRC setting */
- ldr r0, =OMAP2420_SDRC_BASE
- ldr r1, =0x00000010
- str r1, [r0, #0x10]
-
- ldr r1, =0x00000100
- str r1, [r0, #0x44]
-
- /* SDRC CS0 configuration */
-#ifdef CONFIG_APOLLON_PLUS
- ldr r1, =0x01702011
-#else
- ldr r1, =0x00d04011
-#endif
- str r1, [r0, #0x80]
-
- ldr r1, =SDRC_ACTIM_CTRLA_0_VAL
- str r1, [r0, #0x9C]
-
- ldr r1, =SDRC_ACTIM_CTRLB_0_VAL
- str r1, [r0, #0xA0]
-
- ldr r1, =SDRC_RFR_CTRL_0_VAL
- str r1, [r0, #0xA4]
-
- ldr r1, =0x00000041
- str r1, [r0, #0x70]
-
- /* Manual command sequence */
- ldr r1, =0x00000007
- str r1, [r0, #0xA8]
-
- ldr r1, =0x00000000
- str r1, [r0, #0xA8]
-
- ldr r1, =0x00000001
- str r1, [r0, #0xA8]
-
- ldr r1, =0x00000002
- str r1, [r0, #0xA8]
- str r1, [r0, #0xA8]
-
- /*
- * CS0 SDRC Mode register
- * Burst length = 4 - DDR memory
- * Serial mode
- * CAS latency = 3
- */
- ldr r1, =0x00000032
- str r1, [r0, #0x84]
-
- /* Note: You MUST set EMR values */
- /* EMR1 & EMR2 */
- ldr r1, =0x00000000
- str r1, [r0, #0x88]
- str r1, [r0, #0x8C]
-
-#ifdef OLD_SDRC_DLLA_CTRL
- /* SDRC_DLLA_CTRL */
- ldr r1, =0x00007306
- str r1, [r0, #0x60]
-
- ldr r1, =0x00007303
- str r1, [r0, #0x60]
-#else
- /* SDRC_DLLA_CTRL */
- ldr r1, =0x00000506
- str r1, [r0, #0x60]
-
- ldr r1, =0x00000503
- str r1, [r0, #0x60]
-#endif
-
-#ifdef __BROKEN_FEATURE__
- /* SDRC_DLLB_CTRL */
- ldr r1, =0x00000506
- str r1, [r0, #0x68]
-
- ldr r1, =0x00000503
- str r1, [r0, #0x68]
-#endif
-
- /* little delay after init */
- mov r2, #0x1800
-1:
- subs r2, r2, #0x1
- bne 1b
-
- ldr sp, SRAM_STACK
- str ip, [sp] /* stash old link register */
- mov ip, lr /* save link reg across call */
- mov r0, r3 /* pass skip info to s_init */
-
- bl s_init /* go setup pll,mux,memory */
-
- ldr ip, [sp] /* restore save ip */
- mov lr, ip /* restore link reg */
-
- /* back to arch calling code */
- mov pc, lr
-
- /* the literal pools origin */
- .ltorg
-
-SRAM_STACK:
- .word LOW_LEVEL_SRAM_STACK
diff --git a/onenand_ipl/board/apollon/u-boot.onenand.lds b/onenand_ipl/board/apollon/u-boot.onenand.lds
deleted file mode 100644
index 721d2f5..0000000
--- a/onenand_ipl/board/apollon/u-boot.onenand.lds
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2005-2008 Samsung Electronics
- * Kyungmin Park <kyungmin.park@samsung.com>
- *
- * Derived from X-loader
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- start.o (.text)
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .got : { *(.got) }
-
- . = ALIGN(4);
- __bss_start = .;
- .bss : { *(.bss) . = ALIGN(4); }
- __bss_end__ = .;
-}
generated by cgit v1.1 at 2024-12-01 19:12:35 +0000