summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--MAINTAINERS4
-rw-r--r--arch/arm/include/asm/arch-u8500/db8500_gpio.h42
-rw-r--r--arch/arm/include/asm/arch-u8500/db8500_pincfg.h170
-rw-r--r--board/st-ericsson/snowball/Makefile49
-rw-r--r--board/st-ericsson/snowball/db8500_pins.h745
-rw-r--r--board/st-ericsson/snowball/snowball.c166
-rw-r--r--boards.cfg1
-rw-r--r--drivers/gpio/Makefile1
-rw-r--r--drivers/gpio/db8500_gpio.c221
-rw-r--r--drivers/serial/serial_pl01x.c2
-rw-r--r--include/configs/snowball.h256
11 files changed, 1657 insertions, 0 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 052d390..5db80e1 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -808,6 +808,10 @@ Dave Peverley <dpeverley@mpc-data.co.uk>
omap730p2 ARM926EJS
+Mathieu Poirier <mathieu.poirier@linaro.org>
+
+ snowball ARM ARMV7 (u8500 SoC)
+
Stelian Pop <stelian@popies.net>
at91sam9260ek ARM926EJS (AT91SAM9260 SoC)
diff --git a/arch/arm/include/asm/arch-u8500/db8500_gpio.h b/arch/arm/include/asm/arch-u8500/db8500_gpio.h
new file mode 100644
index 0000000..7c85a89
--- /dev/null
+++ b/arch/arm/include/asm/arch-u8500/db8500_gpio.h
@@ -0,0 +1,42 @@
+/*
+ * Structures and registers for GPIO access in the Nomadik SoC
+ *
+ * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code.
+ * The purpose is that GPIO config found in kernel should work by simply
+ * copy-paste it to U-boot.
+ *
+ * Ported to U-boot by:
+ * Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com>
+ * Copyright (C) 2008 STMicroelectronics
+ * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DB8500_GPIO_H__
+#define __DB8500_GPIO_H__
+
+/* Alternate functions: function C is set in hw by setting both A and B */
+enum db8500_gpio_alt {
+ DB8500_GPIO_ALT_GPIO = 0,
+ DB8500_GPIO_ALT_A = 1,
+ DB8500_GPIO_ALT_B = 2,
+ DB8500_GPIO_ALT_C = (DB8500_GPIO_ALT_A | DB8500_GPIO_ALT_B)
+};
+
+enum db8500_gpio_pull {
+ DB8500_GPIO_PULL_NONE,
+ DB8500_GPIO_PULL_UP,
+ DB8500_GPIO_PULL_DOWN
+};
+
+void db8500_gpio_set_pull(unsigned gpio, enum db8500_gpio_pull pull);
+void db8500_gpio_make_input(unsigned gpio);
+int db8500_gpio_get_input(unsigned gpio);
+void db8500_gpio_make_output(unsigned gpio, int val);
+void db8500_gpio_set_output(unsigned gpio, int val);
+
+#endif /* __DB8500_GPIO_H__ */
diff --git a/arch/arm/include/asm/arch-u8500/db8500_pincfg.h b/arch/arm/include/asm/arch-u8500/db8500_pincfg.h
new file mode 100644
index 0000000..6495701
--- /dev/null
+++ b/arch/arm/include/asm/arch-u8500/db8500_pincfg.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code.
+ * The purpose is that GPIO config found in kernel should work by simply
+ * copy-paste it to U-boot. Ported 2010 to U-boot by:
+ * Author: Joakim Axelsson <joakim.axelsson AT stericsson.com>
+ *
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
+ *
+ *
+ * Based on arch/arm/mach-pxa/include/mach/mfp.h:
+ * Copyright (C) 2007 Marvell International Ltd.
+ * eric miao <eric.miao@marvell.com>
+ */
+
+#ifndef __DB8500_PINCFG_H
+#define __DB8500_PINCFG_H
+
+#include "db8500_gpio.h"
+
+/*
+ * U-boot info:
+ * SLPM (sleep mode) config will be ignored by U-boot but it is still
+ * possible to configure it in order to keep cut-n-paste compability
+ * with Linux kernel config.
+ *
+ * pin configurations are represented by 32-bit integers:
+ *
+ * bit 0.. 8 - Pin Number (512 Pins Maximum)
+ * bit 9..10 - Alternate Function Selection
+ * bit 11..12 - Pull up/down state
+ * bit 13 - Sleep mode behaviour (not used in U-boot)
+ * bit 14 - Direction
+ * bit 15 - Value (if output)
+ * bit 16..18 - SLPM pull up/down state (not used in U-boot)
+ * bit 19..20 - SLPM direction (not used in U-boot)
+ * bit 21..22 - SLPM Value (if output) (not used in U-boot)
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * PIN_CFG_DEFAULT - default config (0):
+ * pull up/down = disabled
+ * sleep mode = input/wakeup
+ * direction = input
+ * value = low
+ * SLPM direction = same as normal
+ * SLPM pull = same as normal
+ * SLPM value = same as normal
+ *
+ * PIN_CFG - default config with alternate function
+ * PIN_CFG_PULL - default config with alternate function and pull up/down
+ */
+
+/* Sleep mode */
+enum db8500_gpio_slpm {
+ DB8500_GPIO_SLPM_INPUT,
+ DB8500_GPIO_SLPM_WAKEUP_ENABLE = DB8500_GPIO_SLPM_INPUT,
+ DB8500_GPIO_SLPM_NOCHANGE,
+ DB8500_GPIO_SLPM_WAKEUP_DISABLE = DB8500_GPIO_SLPM_NOCHANGE,
+};
+
+#define PIN_NUM_MASK 0x1ff
+#define PIN_NUM(x) ((x) & PIN_NUM_MASK)
+
+#define PIN_ALT_SHIFT 9
+#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT)
+#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT)
+#define PIN_GPIO (DB8500_GPIO_ALT_GPIO << PIN_ALT_SHIFT)
+#define PIN_ALT_A (DB8500_GPIO_ALT_A << PIN_ALT_SHIFT)
+#define PIN_ALT_B (DB8500_GPIO_ALT_B << PIN_ALT_SHIFT)
+#define PIN_ALT_C (DB8500_GPIO_ALT_C << PIN_ALT_SHIFT)
+
+#define PIN_PULL_SHIFT 11
+#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT)
+#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT)
+#define PIN_PULL_NONE (DB8500_GPIO_PULL_NONE << PIN_PULL_SHIFT)
+#define PIN_PULL_UP (DB8500_GPIO_PULL_UP << PIN_PULL_SHIFT)
+#define PIN_PULL_DOWN (DB8500_GPIO_PULL_DOWN << PIN_PULL_SHIFT)
+
+#define PIN_SLPM_SHIFT 13
+#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT)
+#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT)
+#define PIN_SLPM_MAKE_INPUT (DB8500_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT)
+#define PIN_SLPM_NOCHANGE (DB8500_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT)
+/* These two replace the above in DB8500v2+ */
+#define PIN_SLPM_WAKEUP_ENABLE \
+ (DB8500_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT)
+#define PIN_SLPM_WAKEUP_DISABLE \
+ (DB8500_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT)
+
+#define PIN_DIR_SHIFT 14
+#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT)
+#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT)
+#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT)
+#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT)
+
+#define PIN_VAL_SHIFT 15
+#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT)
+#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT)
+#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT)
+#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT)
+
+#define PIN_SLPM_PULL_SHIFT 16
+#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL(x) \
+ (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_NONE \
+ ((1 + DB8500_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_UP \
+ ((1 + DB8500_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT)
+#define PIN_SLPM_PULL_DOWN \
+ ((1 + DB8500_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT)
+
+#define PIN_SLPM_DIR_SHIFT 19
+#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR(x) \
+ (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT)
+#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT)
+
+#define PIN_SLPM_VAL_SHIFT 21
+#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL(x) \
+ (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT)
+#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT)
+
+/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */
+#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN)
+#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP)
+#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE)
+#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW)
+#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH)
+
+#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN)
+#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP)
+#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE)
+#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW)
+#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH)
+
+#define PIN_CFG_DEFAULT (0)
+
+#define PIN_CFG(num, alt) \
+ (PIN_CFG_DEFAULT |\
+ (PIN_NUM(num) | PIN_##alt))
+
+#define PIN_CFG_INPUT(num, alt, pull) \
+ (PIN_CFG_DEFAULT |\
+ (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull))
+
+#define PIN_CFG_OUTPUT(num, alt, val) \
+ (PIN_CFG_DEFAULT |\
+ (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val))
+
+#define PIN_CFG_PULL(num, alt, pull) \
+ ((PIN_CFG_DEFAULT & ~PIN_PULL_MASK) |\
+ (PIN_NUM(num) | PIN_##alt | PIN_PULL_##pull))
+
+/**
+ * db8500_gpio_config_pins - configure several pins at once
+ * @cfgs: array of pin configurations
+ * @num: number of elments in the array
+ *
+ * Configures several GPIO pins.
+ */
+void db8500_gpio_config_pins(unsigned long *cfgs, size_t num);
+
+#endif
diff --git a/board/st-ericsson/snowball/Makefile b/board/st-ericsson/snowball/Makefile
new file mode 100644
index 0000000..a26dadc
--- /dev/null
+++ b/board/st-ericsson/snowball/Makefile
@@ -0,0 +1,49 @@
+#
+# Copyright (C) ST-Ericsson SA 2009
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+CFLAGS += -D__RELEASE -D__STN_8500
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := snowball.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/st-ericsson/snowball/db8500_pins.h b/board/st-ericsson/snowball/db8500_pins.h
new file mode 100644
index 0000000..e339cb8
--- /dev/null
+++ b/board/st-ericsson/snowball/db8500_pins.h
@@ -0,0 +1,745 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code.
+ * The purpose is that GPIO config found in kernel should work by simply
+ * copy-paste it to U-boot.
+ *
+ * Ported to U-boot by:
+ * Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com>
+ **
+ * License terms: GNU General Public License, version 2
+ * Author: Rabin Vincent <rabin.vincent@stericsson.com>
+ */
+
+#ifndef __DB8500_PINS_H
+#define __DB8500_PINS_H
+
+#include <asm/arch/db8500_pincfg.h>
+
+#define GPIO0_GPIO PIN_CFG(0, GPIO)
+#define GPIO0_U0_CTSn PIN_CFG(0, ALT_A)
+#define GPIO0_TRIG_OUT PIN_CFG(0, ALT_B)
+#define GPIO0_IP_TDO PIN_CFG(0, ALT_C)
+
+#define GPIO1_GPIO PIN_CFG(1, GPIO)
+#define GPIO1_U0_RTSn PIN_CFG(1, ALT_A)
+#define GPIO1_TRIG_IN PIN_CFG(1, ALT_B)
+#define GPIO1_IP_TDI PIN_CFG(1, ALT_C)
+
+#define GPIO2_GPIO PIN_CFG(2, GPIO)
+#define GPIO2_U0_RXD PIN_CFG(2, ALT_A)
+#define GPIO2_NONE PIN_CFG(2, ALT_B)
+#define GPIO2_IP_TMS PIN_CFG(2, ALT_C)
+
+#define GPIO3_GPIO PIN_CFG(3, GPIO)
+#define GPIO3_U0_TXD PIN_CFG(3, ALT_A)
+#define GPIO3_NONE PIN_CFG(3, ALT_B)
+#define GPIO3_IP_TCK PIN_CFG(3, ALT_C)
+
+#define GPIO4_GPIO PIN_CFG(4, GPIO)
+#define GPIO4_U1_RXD PIN_CFG(4, ALT_A)
+#define GPIO4_I2C4_SCL PIN_CFG_PULL(4, ALT_B, UP)
+#define GPIO4_IP_TRSTn PIN_CFG(4, ALT_C)
+
+#define GPIO5_GPIO PIN_CFG(5, GPIO)
+#define GPIO5_U1_TXD PIN_CFG(5, ALT_A)
+#define GPIO5_I2C4_SDA PIN_CFG_PULL(5, ALT_B, UP)
+#define GPIO5_IP_GPIO6 PIN_CFG(5, ALT_C)
+
+#define GPIO6_GPIO PIN_CFG(6, GPIO)
+#define GPIO6_U1_CTSn PIN_CFG(6, ALT_A)
+#define GPIO6_I2C1_SCL PIN_CFG_PULL(6, ALT_B, UP)
+#define GPIO6_IP_GPIO0 PIN_CFG(6, ALT_C)
+
+#define GPIO7_GPIO PIN_CFG(7, GPIO)
+#define GPIO7_U1_RTSn PIN_CFG(7, ALT_A)
+#define GPIO7_I2C1_SDA PIN_CFG_PULL(7, ALT_B, UP)
+#define GPIO7_IP_GPIO1 PIN_CFG(7, ALT_C)
+
+#define GPIO8_GPIO PIN_CFG(8, GPIO)
+#define GPIO8_IPI2C_SDA PIN_CFG_PULL(8, ALT_A, UP)
+#define GPIO8_I2C2_SDA PIN_CFG_PULL(8, ALT_B, UP)
+
+#define GPIO9_GPIO PIN_CFG(9, GPIO)
+#define GPIO9_IPI2C_SCL PIN_CFG_PULL(9, ALT_A, UP)
+#define GPIO9_I2C2_SCL PIN_CFG_PULL(9, ALT_B, UP)
+
+#define GPIO10_GPIO PIN_CFG(10, GPIO)
+#define GPIO10_IPI2C_SDA PIN_CFG_PULL(10, ALT_A, UP)
+#define GPIO10_I2C2_SDA PIN_CFG_PULL(10, ALT_B, UP)
+#define GPIO10_IP_GPIO3 PIN_CFG(10, ALT_C)
+
+#define GPIO11_GPIO PIN_CFG(11, GPIO)
+#define GPIO11_IPI2C_SCL PIN_CFG_PULL(11, ALT_A, UP)
+#define GPIO11_I2C2_SCL PIN_CFG_PULL(11, ALT_B, UP)
+#define GPIO11_IP_GPIO2 PIN_CFG(11, ALT_C)
+
+#define GPIO12_GPIO PIN_CFG(12, GPIO)
+#define GPIO12_MSP0_TXD PIN_CFG(12, ALT_A)
+#define GPIO12_MSP0_RXD PIN_CFG(12, ALT_B)
+
+#define GPIO13_GPIO PIN_CFG(13, GPIO)
+#define GPIO13_MSP0_TFS PIN_CFG(13, ALT_A)
+
+#define GPIO14_GPIO PIN_CFG(14, GPIO)
+#define GPIO14_MSP0_TCK PIN_CFG(14, ALT_A)
+
+#define GPIO15_GPIO PIN_CFG(15, GPIO)
+#define GPIO15_MSP0_RXD PIN_CFG(15, ALT_A)
+#define GPIO15_MSP0_TXD PIN_CFG(15, ALT_B)
+
+#define GPIO16_GPIO PIN_CFG(16, GPIO)
+#define GPIO16_MSP0_RFS PIN_CFG(16, ALT_A)
+#define GPIO16_I2C1_SCL PIN_CFG_PULL(16, ALT_B, UP)
+#define GPIO16_SLIM0_DAT PIN_CFG(16, ALT_C)
+
+#define GPIO17_GPIO PIN_CFG(17, GPIO)
+#define GPIO17_MSP0_RCK PIN_CFG(17, ALT_A)
+#define GPIO17_I2C1_SDA PIN_CFG_PULL(17, ALT_B, UP)
+#define GPIO17_SLIM0_CLK PIN_CFG(17, ALT_C)
+
+#define GPIO18_GPIO PIN_CFG(18, GPIO)
+#define GPIO18_MC0_CMDDIR PIN_CFG(18, ALT_A)
+#define GPIO18_U2_RXD PIN_CFG(18, ALT_B)
+#define GPIO18_MS_IEP PIN_CFG(18, ALT_C)
+
+#define GPIO19_GPIO PIN_CFG(19, GPIO)
+#define GPIO19_MC0_DAT0DIR PIN_CFG(19, ALT_A)
+#define GPIO19_U2_TXD PIN_CFG(19, ALT_B)
+#define GPIO19_MS_DAT0DIR PIN_CFG(19, ALT_C)
+
+#define GPIO20_GPIO PIN_CFG(20, GPIO)
+#define GPIO20_MC0_DAT2DIR PIN_CFG(20, ALT_A)
+#define GPIO20_UARTMOD_TXD PIN_CFG(20, ALT_B)
+#define GPIO20_IP_TRIGOUT PIN_CFG(20, ALT_C)
+
+#define GPIO21_GPIO PIN_CFG(21, GPIO)
+#define GPIO21_MC0_DAT31DIR PIN_CFG(21, ALT_A)
+#define GPIO21_MSP0_SCK PIN_CFG(21, ALT_B)
+#define GPIO21_MS_DAT31DIR PIN_CFG(21, ALT_C)
+
+#define GPIO22_GPIO PIN_CFG(22, GPIO)
+#define GPIO22_MC0_FBCLK PIN_CFG(22, ALT_A)
+#define GPIO22_UARTMOD_RXD PIN_CFG(22, ALT_B)
+#define GPIO22_MS_FBCLK PIN_CFG(22, ALT_C)
+
+#define GPIO23_GPIO PIN_CFG(23, GPIO)
+#define GPIO23_MC0_CLK PIN_CFG(23, ALT_A)
+#define GPIO23_STMMOD_CLK PIN_CFG(23, ALT_B)
+#define GPIO23_MS_CLK PIN_CFG(23, ALT_C)
+
+#define GPIO24_GPIO PIN_CFG(24, GPIO)
+#define GPIO24_MC0_CMD PIN_CFG(24, ALT_A)
+#define GPIO24_UARTMOD_RXD PIN_CFG(24, ALT_B)
+#define GPIO24_MS_BS PIN_CFG(24, ALT_C)
+
+#define GPIO25_GPIO PIN_CFG(25, GPIO)
+#define GPIO25_MC0_DAT0 PIN_CFG(25, ALT_A)
+#define GPIO25_STMMOD_DAT0 PIN_CFG(25, ALT_B)
+#define GPIO25_MS_DAT0 PIN_CFG(25, ALT_C)
+
+#define GPIO26_GPIO PIN_CFG(26, GPIO)
+#define GPIO26_MC0_DAT1 PIN_CFG(26, ALT_A)
+#define GPIO26_STMMOD_DAT1 PIN_CFG(26, ALT_B)
+#define GPIO26_MS_DAT1 PIN_CFG(26, ALT_C)
+
+#define GPIO27_GPIO PIN_CFG(27, GPIO)
+#define GPIO27_MC0_DAT2 PIN_CFG(27, ALT_A)
+#define GPIO27_STMMOD_DAT2 PIN_CFG(27, ALT_B)
+#define GPIO27_MS_DAT2 PIN_CFG(27, ALT_C)
+
+#define GPIO28_GPIO PIN_CFG(28, GPIO)
+#define GPIO28_MC0_DAT3 PIN_CFG(28, ALT_A)
+#define GPIO28_STMMOD_DAT3 PIN_CFG(28, ALT_B)
+#define GPIO28_MS_DAT3 PIN_CFG(28, ALT_C)
+
+#define GPIO29_GPIO PIN_CFG(29, GPIO)
+#define GPIO29_MC0_DAT4 PIN_CFG(29, ALT_A)
+#define GPIO29_SPI3_CLK PIN_CFG(29, ALT_B)
+#define GPIO29_U2_RXD PIN_CFG(29, ALT_C)
+
+#define GPIO30_GPIO PIN_CFG(30, GPIO)
+#define GPIO30_MC0_DAT5 PIN_CFG(30, ALT_A)
+#define GPIO30_SPI3_RXD PIN_CFG(30, ALT_B)
+#define GPIO30_U2_TXD PIN_CFG(30, ALT_C)
+
+#define GPIO31_GPIO PIN_CFG(31, GPIO)
+#define GPIO31_MC0_DAT6 PIN_CFG(31, ALT_A)
+#define GPIO31_SPI3_FRM PIN_CFG(31, ALT_B)
+#define GPIO31_U2_CTSn PIN_CFG(31, ALT_C)
+
+#define GPIO32_GPIO PIN_CFG(32, GPIO)
+#define GPIO32_MC0_DAT7 PIN_CFG(32, ALT_A)
+#define GPIO32_SPI3_TXD PIN_CFG(32, ALT_B)
+#define GPIO32_U2_RTSn PIN_CFG(32, ALT_C)
+
+#define GPIO33_GPIO PIN_CFG(33, GPIO)
+#define GPIO33_MSP1_TXD PIN_CFG(33, ALT_A)
+#define GPIO33_MSP1_RXD PIN_CFG(33, ALT_B)
+#define GPIO33_U0_DTRn PIN_CFG(33, ALT_C)
+
+#define GPIO34_GPIO PIN_CFG(34, GPIO)
+#define GPIO34_MSP1_TFS PIN_CFG(34, ALT_A)
+#define GPIO34_NONE PIN_CFG(34, ALT_B)
+#define GPIO34_U0_DCDn PIN_CFG(34, ALT_C)
+
+#define GPIO35_GPIO PIN_CFG(35, GPIO)
+#define GPIO35_MSP1_TCK PIN_CFG(35, ALT_A)
+#define GPIO35_NONE PIN_CFG(35, ALT_B)
+#define GPIO35_U0_DSRn PIN_CFG(35, ALT_C)
+
+#define GPIO36_GPIO PIN_CFG(36, GPIO)
+#define GPIO36_MSP1_RXD PIN_CFG(36, ALT_A)
+#define GPIO36_MSP1_TXD PIN_CFG(36, ALT_B)
+#define GPIO36_U0_RIn PIN_CFG(36, ALT_C)
+
+#define GPIO64_GPIO PIN_CFG(64, GPIO)
+#define GPIO64_LCDB_DE PIN_CFG(64, ALT_A)
+#define GPIO64_KP_O1 PIN_CFG(64, ALT_B)
+#define GPIO64_IP_GPIO4 PIN_CFG(64, ALT_C)
+
+#define GPIO65_GPIO PIN_CFG(65, GPIO)
+#define GPIO65_LCDB_HSO PIN_CFG(65, ALT_A)
+#define GPIO65_KP_O0 PIN_CFG(65, ALT_B)
+#define GPIO65_IP_GPIO5 PIN_CFG(65, ALT_C)
+
+#define GPIO66_GPIO PIN_CFG(66, GPIO)
+#define GPIO66_LCDB_VSO PIN_CFG(66, ALT_A)
+#define GPIO66_KP_I1 PIN_CFG(66, ALT_B)
+#define GPIO66_IP_GPIO6 PIN_CFG(66, ALT_C)
+
+#define GPIO67_GPIO PIN_CFG(67, GPIO)
+#define GPIO67_LCDB_CLK PIN_CFG(67, ALT_A)
+#define GPIO67_KP_I0 PIN_CFG(67, ALT_B)
+#define GPIO67_IP_GPIO7 PIN_CFG(67, ALT_C)
+
+#define GPIO68_GPIO PIN_CFG(68, GPIO)
+#define GPIO68_LCD_VSI0 PIN_CFG(68, ALT_A)
+#define GPIO68_KP_O7 PIN_CFG(68, ALT_B)
+#define GPIO68_SM_CLE PIN_CFG(68, ALT_C)
+
+#define GPIO69_GPIO PIN_CFG(69, GPIO)
+#define GPIO69_LCD_VSI1 PIN_CFG(69, ALT_A)
+#define GPIO69_KP_I7 PIN_CFG(69, ALT_B)
+#define GPIO69_SM_ALE PIN_CFG(69, ALT_C)
+
+#define GPIO70_GPIO PIN_CFG(70, GPIO)
+#define GPIO70_LCD_D0 PIN_CFG(70, ALT_A)
+#define GPIO70_KP_O5 PIN_CFG(70, ALT_B)
+#define GPIO70_STMAPE_CLK PIN_CFG(70, ALT_C)
+
+#define GPIO71_GPIO PIN_CFG(71, GPIO)
+#define GPIO71_LCD_D1 PIN_CFG(71, ALT_A)
+#define GPIO71_KP_O4 PIN_CFG(71, ALT_B)
+#define GPIO71_STMAPE_DAT3 PIN_CFG(71, ALT_C)
+
+#define GPIO72_GPIO PIN_CFG(72, GPIO)
+#define GPIO72_LCD_D2 PIN_CFG(72, ALT_A)
+#define GPIO72_KP_O3 PIN_CFG(72, ALT_B)
+#define GPIO72_STMAPE_DAT2 PIN_CFG(72, ALT_C)
+
+#define GPIO73_GPIO PIN_CFG(73, GPIO)
+#define GPIO73_LCD_D3 PIN_CFG(73, ALT_A)
+#define GPIO73_KP_O2 PIN_CFG(73, ALT_B)
+#define GPIO73_STMAPE_DAT1 PIN_CFG(73, ALT_C)
+
+#define GPIO74_GPIO PIN_CFG(74, GPIO)
+#define GPIO74_LCD_D4 PIN_CFG(74, ALT_A)
+#define GPIO74_KP_I5 PIN_CFG(74, ALT_B)
+#define GPIO74_STMAPE_DAT0 PIN_CFG(74, ALT_C)
+
+#define GPIO75_GPIO PIN_CFG(75, GPIO)
+#define GPIO75_LCD_D5 PIN_CFG(75, ALT_A)
+#define GPIO75_KP_I4 PIN_CFG(75, ALT_B)
+#define GPIO75_U2_RXD PIN_CFG(75, ALT_C)
+
+#define GPIO76_GPIO PIN_CFG(76, GPIO)
+#define GPIO76_LCD_D6 PIN_CFG(76, ALT_A)
+#define GPIO76_KP_I3 PIN_CFG(76, ALT_B)
+#define GPIO76_U2_TXD PIN_CFG(76, ALT_C)
+
+#define GPIO77_GPIO PIN_CFG(77, GPIO)
+#define GPIO77_LCD_D7 PIN_CFG(77, ALT_A)
+#define GPIO77_KP_I2 PIN_CFG(77, ALT_B)
+#define GPIO77_NONE PIN_CFG(77, ALT_C)
+
+#define GPIO78_GPIO PIN_CFG(78, GPIO)
+#define GPIO78_LCD_D8 PIN_CFG(78, ALT_A)
+#define GPIO78_KP_O6 PIN_CFG(78, ALT_B)
+#define GPIO78_IP_GPIO2 PIN_CFG(78, ALT_C)
+
+#define GPIO79_GPIO PIN_CFG(79, GPIO)
+#define GPIO79_LCD_D9 PIN_CFG(79, ALT_A)
+#define GPIO79_KP_I6 PIN_CFG(79, ALT_B)
+#define GPIO79_IP_GPIO3 PIN_CFG(79, ALT_C)
+
+#define GPIO80_GPIO PIN_CFG(80, GPIO)
+#define GPIO80_LCD_D10 PIN_CFG(80, ALT_A)
+#define GPIO80_KP_SKA0 PIN_CFG(80, ALT_B)
+#define GPIO80_IP_GPIO4 PIN_CFG(80, ALT_C)
+
+#define GPIO81_GPIO PIN_CFG(81, GPIO)
+#define GPIO81_LCD_D11 PIN_CFG(81, ALT_A)
+#define GPIO81_KP_SKB0 PIN_CFG(81, ALT_B)
+#define GPIO81_IP_GPIO5 PIN_CFG(81, ALT_C)
+
+#define GPIO82_GPIO PIN_CFG(82, GPIO)
+#define GPIO82_LCD_D12 PIN_CFG(82, ALT_A)
+#define GPIO82_KP_O5 PIN_CFG(82, ALT_B)
+
+#define GPIO83_GPIO PIN_CFG(83, GPIO)
+#define GPIO83_LCD_D13 PIN_CFG(83, ALT_A)
+#define GPIO83_KP_O4 PIN_CFG(83, ALT_B)
+
+#define GPIO84_GPIO PIN_CFG_PULL(84, GPIO, UP)
+#define GPIO84_LCD_D14 PIN_CFG(84, ALT_A)
+#define GPIO84_KP_I5 PIN_CFG(84, ALT_B)
+
+#define GPIO85_GPIO PIN_CFG(85, GPIO)
+#define GPIO85_LCD_D15 PIN_CFG(85, ALT_A)
+#define GPIO85_KP_I4 PIN_CFG(85, ALT_B)
+
+#define GPIO86_GPIO PIN_CFG(86, GPIO)
+#define GPIO86_LCD_D16 PIN_CFG(86, ALT_A)
+#define GPIO86_SM_ADQ0 PIN_CFG(86, ALT_B)
+#define GPIO86_MC5_DAT0 PIN_CFG(86, ALT_C)
+
+#define GPIO87_GPIO PIN_CFG(87, GPIO)
+#define GPIO87_LCD_D17 PIN_CFG(87, ALT_A)
+#define GPIO87_SM_ADQ1 PIN_CFG(87, ALT_B)
+#define GPIO87_MC5_DAT1 PIN_CFG(87, ALT_C)
+
+#define GPIO88_GPIO PIN_CFG(88, GPIO)
+#define GPIO88_LCD_D18 PIN_CFG(88, ALT_A)
+#define GPIO88_SM_ADQ2 PIN_CFG(88, ALT_B)
+#define GPIO88_MC5_DAT2 PIN_CFG(88, ALT_C)
+
+#define GPIO89_GPIO PIN_CFG(89, GPIO)
+#define GPIO89_LCD_D19 PIN_CFG(89, ALT_A)
+#define GPIO89_SM_ADQ3 PIN_CFG(89, ALT_B)
+#define GPIO89_MC5_DAT3 PIN_CFG(89, ALT_C)
+
+#define GPIO90_GPIO PIN_CFG(90, GPIO)
+#define GPIO90_LCD_D20 PIN_CFG(90, ALT_A)
+#define GPIO90_SM_ADQ4 PIN_CFG(90, ALT_B)
+#define GPIO90_MC5_CMD PIN_CFG(90, ALT_C)
+
+#define GPIO91_GPIO PIN_CFG(91, GPIO)
+#define GPIO91_LCD_D21 PIN_CFG(91, ALT_A)
+#define GPIO91_SM_ADQ5 PIN_CFG(91, ALT_B)
+#define GPIO91_MC5_FBCLK PIN_CFG(91, ALT_C)
+
+#define GPIO92_GPIO PIN_CFG(92, GPIO)
+#define GPIO92_LCD_D22 PIN_CFG(92, ALT_A)
+#define GPIO92_SM_ADQ6 PIN_CFG(92, ALT_B)
+#define GPIO92_MC5_CLK PIN_CFG(92, ALT_C)
+
+#define GPIO93_GPIO PIN_CFG(93, GPIO)
+#define GPIO93_LCD_D23 PIN_CFG(93, ALT_A)
+#define GPIO93_SM_ADQ7 PIN_CFG(93, ALT_B)
+#define GPIO93_MC5_DAT4 PIN_CFG(93, ALT_C)
+
+#define GPIO94_GPIO PIN_CFG(94, GPIO)
+#define GPIO94_KP_O7 PIN_CFG(94, ALT_A)
+#define GPIO94_SM_ADVn PIN_CFG(94, ALT_B)
+#define GPIO94_MC5_DAT5 PIN_CFG(94, ALT_C)
+
+#define GPIO95_GPIO PIN_CFG(95, GPIO)
+#define GPIO95_KP_I7 PIN_CFG(95, ALT_A)
+#define GPIO95_SM_CS0n PIN_CFG(95, ALT_B)
+#define GPIO95_SM_PS0n PIN_CFG(95, ALT_C)
+
+#define GPIO96_GPIO PIN_CFG(96, GPIO)
+#define GPIO96_KP_O6 PIN_CFG(96, ALT_A)
+#define GPIO96_SM_OEn PIN_CFG(96, ALT_B)
+#define GPIO96_MC5_DAT6 PIN_CFG(96, ALT_C)
+
+#define GPIO97_GPIO PIN_CFG(97, GPIO)
+#define GPIO97_KP_I6 PIN_CFG(97, ALT_A)
+#define GPIO97_SM_WEn PIN_CFG(97, ALT_B)
+#define GPIO97_MC5_DAT7 PIN_CFG(97, ALT_C)
+
+#define GPIO128_GPIO PIN_CFG(128, GPIO)
+#define GPIO128_MC2_CLK PIN_CFG(128, ALT_A)
+#define GPIO128_SM_CKO PIN_CFG(128, ALT_B)
+
+#define GPIO129_GPIO PIN_CFG(129, GPIO)
+#define GPIO129_MC2_CMD PIN_CFG(129, ALT_A)
+#define GPIO129_SM_WAIT0n PIN_CFG(129, ALT_B)
+
+#define GPIO130_GPIO PIN_CFG(130, GPIO)
+#define GPIO130_MC2_FBCLK PIN_CFG(130, ALT_A)
+#define GPIO130_SM_FBCLK PIN_CFG(130, ALT_B)
+#define GPIO130_MC2_RSTN PIN_CFG(130, ALT_C)
+
+#define GPIO131_GPIO PIN_CFG(131, GPIO)
+#define GPIO131_MC2_DAT0 PIN_CFG(131, ALT_A)
+#define GPIO131_SM_ADQ8 PIN_CFG(131, ALT_B)
+
+#define GPIO132_GPIO PIN_CFG(132, GPIO)
+#define GPIO132_MC2_DAT1 PIN_CFG(132, ALT_A)
+#define GPIO132_SM_ADQ9 PIN_CFG(132, ALT_B)
+
+#define GPIO133_GPIO PIN_CFG(133, GPIO)
+#define GPIO133_MC2_DAT2 PIN_CFG(133, ALT_A)
+#define GPIO133_SM_ADQ10 PIN_CFG(133, ALT_B)
+
+#define GPIO134_GPIO PIN_CFG(134, GPIO)
+#define GPIO134_MC2_DAT3 PIN_CFG(134, ALT_A)
+#define GPIO134_SM_ADQ11 PIN_CFG(134, ALT_B)
+
+#define GPIO135_GPIO PIN_CFG(135, GPIO)
+#define GPIO135_MC2_DAT4 PIN_CFG(135, ALT_A)
+#define GPIO135_SM_ADQ12 PIN_CFG(135, ALT_B)
+
+#define GPIO136_GPIO PIN_CFG(136, GPIO)
+#define GPIO136_MC2_DAT5 PIN_CFG(136, ALT_A)
+#define GPIO136_SM_ADQ13 PIN_CFG(136, ALT_B)
+
+#define GPIO137_GPIO PIN_CFG(137, GPIO)
+#define GPIO137_MC2_DAT6 PIN_CFG(137, ALT_A)
+#define GPIO137_SM_ADQ14 PIN_CFG(137, ALT_B)
+
+#define GPIO138_GPIO PIN_CFG(138, GPIO)
+#define GPIO138_MC2_DAT7 PIN_CFG(138, ALT_A)
+#define GPIO138_SM_ADQ15 PIN_CFG(138, ALT_B)
+
+#define GPIO139_GPIO PIN_CFG(139, GPIO)
+#define GPIO139_SSP1_RXD PIN_CFG(139, ALT_A)
+#define GPIO139_SM_WAIT1n PIN_CFG(139, ALT_B)
+#define GPIO139_KP_O8 PIN_CFG(139, ALT_C)
+
+#define GPIO140_GPIO PIN_CFG(140, GPIO)
+#define GPIO140_SSP1_TXD PIN_CFG(140, ALT_A)
+#define GPIO140_IP_GPIO7 PIN_CFG(140, ALT_B)
+#define GPIO140_KP_SKA1 PIN_CFG(140, ALT_C)
+
+#define GPIO141_GPIO PIN_CFG(141, GPIO)
+#define GPIO141_SSP1_CLK PIN_CFG(141, ALT_A)
+#define GPIO141_IP_GPIO2 PIN_CFG(141, ALT_B)
+#define GPIO141_KP_O9 PIN_CFG(141, ALT_C)
+
+#define GPIO142_GPIO PIN_CFG(142, GPIO)
+#define GPIO142_SSP1_FRM PIN_CFG(142, ALT_A)
+#define GPIO142_IP_GPIO3 PIN_CFG(142, ALT_B)
+#define GPIO142_KP_SKB1 PIN_CFG(142, ALT_C)
+
+#define GPIO143_GPIO PIN_CFG(143, GPIO)
+#define GPIO143_SSP0_CLK PIN_CFG(143, ALT_A)
+
+#define GPIO144_GPIO PIN_CFG(144, GPIO)
+#define GPIO144_SSP0_FRM PIN_CFG(144, ALT_A)
+
+#define GPIO145_GPIO PIN_CFG(145, GPIO)
+#define GPIO145_SSP0_RXD PIN_CFG(145, ALT_A)
+
+#define GPIO146_GPIO PIN_CFG(146, GPIO)
+#define GPIO146_SSP0_TXD PIN_CFG(146, ALT_A)
+
+#define GPIO147_GPIO PIN_CFG(147, GPIO)
+#define GPIO147_I2C0_SCL PIN_CFG_PULL(147, ALT_A, UP)
+
+#define GPIO148_GPIO PIN_CFG(148, GPIO)
+#define GPIO148_I2C0_SDA PIN_CFG_PULL(148, ALT_A, UP)
+
+#define GPIO149_GPIO PIN_CFG(149, GPIO)
+#define GPIO149_IP_GPIO0 PIN_CFG(149, ALT_A)
+#define GPIO149_SM_CS1n PIN_CFG(149, ALT_B)
+#define GPIO149_SM_PS1n PIN_CFG(149, ALT_C)
+
+#define GPIO150_GPIO PIN_CFG(150, GPIO)
+#define GPIO150_IP_GPIO1 PIN_CFG(150, ALT_A)
+#define GPIO150_LCDA_CLK PIN_CFG(150, ALT_B)
+
+#define GPIO151_GPIO PIN_CFG(151, GPIO)
+#define GPIO151_KP_SKA0 PIN_CFG(151, ALT_A)
+#define GPIO151_LCD_VSI0 PIN_CFG(151, ALT_B)
+#define GPIO151_KP_O8 PIN_CFG(151, ALT_C)
+
+#define GPIO152_GPIO PIN_CFG(152, GPIO)
+#define GPIO152_KP_SKB0 PIN_CFG(152, ALT_A)
+#define GPIO152_LCD_VSI1 PIN_CFG(152, ALT_B)
+#define GPIO152_KP_O9 PIN_CFG(152, ALT_C)
+
+#define GPIO153_GPIO PIN_CFG(153, GPIO)
+#define GPIO153_KP_I7 PIN_CFG_PULL(153, ALT_A, DOWN)
+#define GPIO153_LCD_D24 PIN_CFG(153, ALT_B)
+#define GPIO153_U2_RXD PIN_CFG(153, ALT_C)
+
+#define GPIO154_GPIO PIN_CFG(154, GPIO)
+#define GPIO154_KP_I6 PIN_CFG_PULL(154, ALT_A, DOWN)
+#define GPIO154_LCD_D25 PIN_CFG(154, ALT_B)
+#define GPIO154_U2_TXD PIN_CFG(154, ALT_C)
+
+#define GPIO155_GPIO PIN_CFG(155, GPIO)
+#define GPIO155_KP_I5 PIN_CFG_PULL(155, ALT_A, DOWN)
+#define GPIO155_LCD_D26 PIN_CFG(155, ALT_B)
+#define GPIO155_STMAPE_CLK PIN_CFG(155, ALT_C)
+
+#define GPIO156_GPIO PIN_CFG(156, GPIO)
+#define GPIO156_KP_I4 PIN_CFG_PULL(156, ALT_A, DOWN)
+#define GPIO156_LCD_D27 PIN_CFG(156, ALT_B)
+#define GPIO156_STMAPE_DAT3 PIN_CFG(156, ALT_C)
+
+#define GPIO157_GPIO PIN_CFG(157, GPIO)
+#define GPIO157_KP_O7 PIN_CFG_PULL(157, ALT_A, UP)
+#define GPIO157_LCD_D28 PIN_CFG(157, ALT_B)
+#define GPIO157_STMAPE_DAT2 PIN_CFG(157, ALT_C)
+
+#define GPIO158_GPIO PIN_CFG(158, GPIO)
+#define GPIO158_KP_O6 PIN_CFG_PULL(158, ALT_A, UP)
+#define GPIO158_LCD_D29 PIN_CFG(158, ALT_B)
+#define GPIO158_STMAPE_DAT1 PIN_CFG(158, ALT_C)
+
+#define GPIO159_GPIO PIN_CFG(159, GPIO)
+#define GPIO159_KP_O5 PIN_CFG_PULL(159, ALT_A, UP)
+#define GPIO159_LCD_D30 PIN_CFG(159, ALT_B)
+#define GPIO159_STMAPE_DAT0 PIN_CFG(159, ALT_C)
+
+#define GPIO160_GPIO PIN_CFG(160, GPIO)
+#define GPIO160_KP_O4 PIN_CFG_PULL(160, ALT_A, UP)
+#define GPIO160_LCD_D31 PIN_CFG(160, ALT_B)
+#define GPIO160_NONE PIN_CFG(160, ALT_C)
+
+#define GPIO161_GPIO PIN_CFG(161, GPIO)
+#define GPIO161_KP_I3 PIN_CFG_PULL(161, ALT_A, DOWN)
+#define GPIO161_LCD_D32 PIN_CFG(161, ALT_B)
+#define GPIO161_UARTMOD_RXD PIN_CFG(161, ALT_C)
+
+#define GPIO162_GPIO PIN_CFG(162, GPIO)
+#define GPIO162_KP_I2 PIN_CFG_PULL(162, ALT_A, DOWN)
+#define GPIO162_LCD_D33 PIN_CFG(162, ALT_B)
+#define GPIO162_UARTMOD_TXD PIN_CFG(162, ALT_C)
+
+#define GPIO163_GPIO PIN_CFG(163, GPIO)
+#define GPIO163_KP_I1 PIN_CFG_PULL(163, ALT_A, DOWN)
+#define GPIO163_LCD_D34 PIN_CFG(163, ALT_B)
+#define GPIO163_STMMOD_CLK PIN_CFG(163, ALT_C)
+
+#define GPIO164_GPIO PIN_CFG(164, GPIO)
+#define GPIO164_KP_I0 PIN_CFG_PULL(164, ALT_A, UP)
+#define GPIO164_LCD_D35 PIN_CFG(164, ALT_B)
+#define GPIO164_STMMOD_DAT3 PIN_CFG(164, ALT_C)
+
+#define GPIO165_GPIO PIN_CFG(165, GPIO)
+#define GPIO165_KP_O3 PIN_CFG_PULL(165, ALT_A, UP)
+#define GPIO165_LCD_D36 PIN_CFG(165, ALT_B)
+#define GPIO165_STMMOD_DAT2 PIN_CFG(165, ALT_C)
+
+#define GPIO166_GPIO PIN_CFG(166, GPIO)
+#define GPIO166_KP_O2 PIN_CFG_PULL(166, ALT_A, UP)
+#define GPIO166_LCD_D37 PIN_CFG(166, ALT_B)
+#define GPIO166_STMMOD_DAT1 PIN_CFG(166, ALT_C)
+
+#define GPIO167_GPIO PIN_CFG(167, GPIO)
+#define GPIO167_KP_O1 PIN_CFG_PULL(167, ALT_A, UP)
+#define GPIO167_LCD_D38 PIN_CFG(167, ALT_B)
+#define GPIO167_STMMOD_DAT0 PIN_CFG(167, ALT_C)
+
+#define GPIO168_GPIO PIN_CFG(168, GPIO)
+#define GPIO168_KP_O0 PIN_CFG_PULL(168, ALT_A, UP)
+#define GPIO168_LCD_D39 PIN_CFG(168, ALT_B)
+#define GPIO168_NONE PIN_CFG(168, ALT_C)
+
+#define GPIO169_GPIO PIN_CFG(169, GPIO)
+#define GPIO169_RF_PURn PIN_CFG(169, ALT_A)
+#define GPIO169_LCDA_DE PIN_CFG(169, ALT_B)
+#define GPIO169_USBSIM_PDC PIN_CFG(169, ALT_C)
+
+#define GPIO170_GPIO PIN_CFG(170, GPIO)
+#define GPIO170_MODEM_STATE PIN_CFG(170, ALT_A)
+#define GPIO170_LCDA_VSO PIN_CFG(170, ALT_B)
+#define GPIO170_KP_SKA1 PIN_CFG(170, ALT_C)
+
+#define GPIO171_GPIO PIN_CFG(171, GPIO)
+#define GPIO171_MODEM_PWREN PIN_CFG(171, ALT_A)
+#define GPIO171_LCDA_HSO PIN_CFG(171, ALT_B)
+#define GPIO171_KP_SKB1 PIN_CFG(171, ALT_C)
+
+#define GPIO192_GPIO PIN_CFG(192, GPIO)
+#define GPIO192_MSP2_SCK PIN_CFG(192, ALT_A)
+
+#define GPIO193_GPIO PIN_CFG(193, GPIO)
+#define GPIO193_MSP2_TXD PIN_CFG(193, ALT_A)
+
+#define GPIO194_GPIO PIN_CFG(194, GPIO)
+#define GPIO194_MSP2_TCK PIN_CFG(194, ALT_A)
+
+#define GPIO195_GPIO PIN_CFG(195, GPIO)
+#define GPIO195_MSP2_TFS PIN_CFG(195, ALT_A)
+
+#define GPIO196_GPIO PIN_CFG(196, GPIO)
+#define GPIO196_MSP2_RXD PIN_CFG(196, ALT_A)
+
+#define GPIO197_GPIO PIN_CFG(197, GPIO)
+#define GPIO197_MC4_DAT3 PIN_CFG(197, ALT_A)
+
+#define GPIO198_GPIO PIN_CFG(198, GPIO)
+#define GPIO198_MC4_DAT2 PIN_CFG(198, ALT_A)
+
+#define GPIO199_GPIO PIN_CFG(199, GPIO)
+#define GPIO199_MC4_DAT1 PIN_CFG(199, ALT_A)
+
+#define GPIO200_GPIO PIN_CFG(200, GPIO)
+#define GPIO200_MC4_DAT0 PIN_CFG(200, ALT_A)
+
+#define GPIO201_GPIO PIN_CFG(201, GPIO)
+#define GPIO201_MC4_CMD PIN_CFG(201, ALT_A)
+
+#define GPIO202_GPIO PIN_CFG(202, GPIO)
+#define GPIO202_MC4_FBCLK PIN_CFG(202, ALT_A)
+#define GPIO202_PWL PIN_CFG(202, ALT_B)
+#define GPIO202_MC4_RSTN PIN_CFG(202, ALT_C)
+
+#define GPIO203_GPIO PIN_CFG(203, GPIO)
+#define GPIO203_MC4_CLK PIN_CFG(203, ALT_A)
+
+#define GPIO204_GPIO PIN_CFG(204, GPIO)
+#define GPIO204_MC4_DAT7 PIN_CFG(204, ALT_A)
+
+#define GPIO205_GPIO PIN_CFG(205, GPIO)
+#define GPIO205_MC4_DAT6 PIN_CFG(205, ALT_A)
+
+#define GPIO206_GPIO PIN_CFG(206, GPIO)
+#define GPIO206_MC4_DAT5 PIN_CFG(206, ALT_A)
+
+#define GPIO207_GPIO PIN_CFG(207, GPIO)
+#define GPIO207_MC4_DAT4 PIN_CFG(207, ALT_A)
+
+#define GPIO208_GPIO PIN_CFG(208, GPIO)
+#define GPIO208_MC1_CLK PIN_CFG(208, ALT_A)
+
+#define GPIO209_GPIO PIN_CFG(209, GPIO)
+#define GPIO209_MC1_FBCLK PIN_CFG(209, ALT_A)
+#define GPIO209_SPI1_CLK PIN_CFG(209, ALT_B)
+
+#define GPIO210_GPIO PIN_CFG(210, GPIO)
+#define GPIO210_MC1_CMD PIN_CFG(210, ALT_A)
+
+#define GPIO211_GPIO PIN_CFG(211, GPIO)
+#define GPIO211_MC1_DAT0 PIN_CFG(211, ALT_A)
+
+#define GPIO212_GPIO PIN_CFG(212, GPIO)
+#define GPIO212_MC1_DAT1 PIN_CFG(212, ALT_A)
+#define GPIO212_SPI1_FRM PIN_CFG(212, ALT_B)
+
+#define GPIO213_GPIO PIN_CFG(213, GPIO)
+#define GPIO213_MC1_DAT2 PIN_CFG(213, ALT_A)
+#define GPIO213_SPI1_TXD PIN_CFG(213, ALT_B)
+
+#define GPIO214_GPIO PIN_CFG(214, GPIO)
+#define GPIO214_MC1_DAT3 PIN_CFG(214, ALT_A)
+#define GPIO214_SPI1_RXD PIN_CFG(214, ALT_B)
+
+#define GPIO215_GPIO PIN_CFG(215, GPIO)
+#define GPIO215_MC1_CMDDIR PIN_CFG(215, ALT_A)
+#define GPIO215_MC3_DAT2DIR PIN_CFG(215, ALT_B)
+#define GPIO215_CLKOUT1 PIN_CFG(215, ALT_C)
+
+#define GPIO216_GPIO PIN_CFG(216, GPIO)
+#define GPIO216_MC1_DAT2DIR PIN_CFG(216, ALT_A)
+#define GPIO216_MC3_CMDDIR PIN_CFG(216, ALT_B)
+#define GPIO216_I2C3_SDA PIN_CFG_PULL(216, ALT_C, UP)
+
+#define GPIO217_GPIO PIN_CFG(217, GPIO)
+#define GPIO217_MC1_DAT0DIR PIN_CFG(217, ALT_A)
+#define GPIO217_MC3_DAT31DIR PIN_CFG(217, ALT_B)
+#define GPIO217_CLKOUT2 PIN_CFG(217, ALT_C)
+
+#define GPIO218_GPIO PIN_CFG(218, GPIO)
+#define GPIO218_MC1_DAT31DIR PIN_CFG(218, ALT_A)
+#define GPIO218_MC3_DAT0DIR PIN_CFG(218, ALT_B)
+#define GPIO218_I2C3_SCL PIN_CFG_PULL(218, ALT_C, UP)
+
+#define GPIO219_GPIO PIN_CFG(219, GPIO)
+#define GPIO219_HSIR_FLA0 PIN_CFG(219, ALT_A)
+#define GPIO219_MC3_CLK PIN_CFG(219, ALT_B)
+
+#define GPIO220_GPIO PIN_CFG(220, GPIO)
+#define GPIO220_HSIR_DAT0 PIN_CFG(220, ALT_A)
+#define GPIO220_MC3_FBCLK PIN_CFG(220, ALT_B)
+#define GPIO220_SPI0_CLK PIN_CFG(220, ALT_C)
+
+#define GPIO221_GPIO PIN_CFG(221, GPIO)
+#define GPIO221_HSIR_RDY0 PIN_CFG(221, ALT_A)
+#define GPIO221_MC3_CMD PIN_CFG(221, ALT_B)
+
+#define GPIO222_GPIO PIN_CFG(222, GPIO)
+#define GPIO222_HSIT_FLA0 PIN_CFG(222, ALT_A)
+#define GPIO222_MC3_DAT0 PIN_CFG(222, ALT_B)
+
+#define GPIO223_GPIO PIN_CFG(223, GPIO)
+#define GPIO223_HSIT_DAT0 PIN_CFG(223, ALT_A)
+#define GPIO223_MC3_DAT1 PIN_CFG(223, ALT_B)
+#define GPIO223_SPI0_FRM PIN_CFG(223, ALT_C)
+
+#define GPIO224_GPIO PIN_CFG(224, GPIO)
+#define GPIO224_HSIT_RDY0 PIN_CFG(224, ALT_A)
+#define GPIO224_MC3_DAT2 PIN_CFG(224, ALT_B)
+#define GPIO224_SPI0_TXD PIN_CFG(224, ALT_C)
+
+#define GPIO225_GPIO PIN_CFG(225, GPIO)
+#define GPIO225_HSIT_CAWAKE0 PIN_CFG(225, ALT_A)
+#define GPIO225_MC3_DAT3 PIN_CFG(225, ALT_B)
+#define GPIO225_SPI0_RXD PIN_CFG(225, ALT_C)
+
+#define GPIO226_GPIO PIN_CFG(226, GPIO)
+#define GPIO226_HSIT_ACWAKE0 PIN_CFG(226, ALT_A)
+#define GPIO226_PWL PIN_CFG(226, ALT_B)
+#define GPIO226_USBSIM_PDC PIN_CFG(226, ALT_C)
+
+#define GPIO227_GPIO PIN_CFG(227, GPIO)
+#define GPIO227_CLKOUT1 PIN_CFG(227, ALT_A)
+
+#define GPIO228_GPIO PIN_CFG(228, GPIO)
+#define GPIO228_CLKOUT2 PIN_CFG(228, ALT_A)
+
+#define GPIO229_GPIO PIN_CFG(229, GPIO)
+#define GPIO229_CLKOUT1 PIN_CFG(229, ALT_A)
+#define GPIO229_PWL PIN_CFG(229, ALT_B)
+#define GPIO229_I2C3_SDA PIN_CFG_PULL(229, ALT_C, UP)
+
+#define GPIO230_GPIO PIN_CFG(230, GPIO)
+#define GPIO230_CLKOUT2 PIN_CFG(230, ALT_A)
+#define GPIO230_PWL PIN_CFG(230, ALT_B)
+#define GPIO230_I2C3_SCL PIN_CFG_PULL(230, ALT_C, UP)
+
+#define GPIO256_GPIO PIN_CFG(256, GPIO)
+#define GPIO256_USB_NXT PIN_CFG(256, ALT_A)
+
+#define GPIO257_GPIO PIN_CFG(257, GPIO)
+#define GPIO257_USB_STP PIN_CFG(257, ALT_A)
+
+#define GPIO258_GPIO PIN_CFG(258, GPIO)
+#define GPIO258_USB_XCLK PIN_CFG(258, ALT_A)
+#define GPIO258_NONE PIN_CFG(258, ALT_B)
+#define GPIO258_DDR_TRIG PIN_CFG(258, ALT_C)
+
+#define GPIO259_GPIO PIN_CFG(259, GPIO)
+#define GPIO259_USB_DIR PIN_CFG(259, ALT_A)
+
+#define GPIO260_GPIO PIN_CFG(260, GPIO)
+#define GPIO260_USB_DAT7 PIN_CFG(260, ALT_A)
+
+#define GPIO261_GPIO PIN_CFG(261, GPIO)
+#define GPIO261_USB_DAT6 PIN_CFG(261, ALT_A)
+
+#define GPIO262_GPIO PIN_CFG(262, GPIO)
+#define GPIO262_USB_DAT5 PIN_CFG(262, ALT_A)
+
+#define GPIO263_GPIO PIN_CFG(263, GPIO)
+#define GPIO263_USB_DAT4 PIN_CFG(263, ALT_A)
+
+#define GPIO264_GPIO PIN_CFG(264, GPIO)
+#define GPIO264_USB_DAT3 PIN_CFG(264, ALT_A)
+
+#define GPIO265_GPIO PIN_CFG(265, GPIO)
+#define GPIO265_USB_DAT2 PIN_CFG(265, ALT_A)
+
+#define GPIO266_GPIO PIN_CFG(266, GPIO)
+#define GPIO266_USB_DAT1 PIN_CFG(266, ALT_A)
+
+#define GPIO267_GPIO PIN_CFG(267, GPIO)
+#define GPIO267_USB_DAT0 PIN_CFG(267, ALT_A)
+
+#endif
diff --git a/board/st-ericsson/snowball/snowball.c b/board/st-ericsson/snowball/snowball.c
new file mode 100644
index 0000000..4bcc649
--- /dev/null
+++ b/board/st-ericsson/snowball/snowball.c
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2009
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <i2c.h>
+#include <mmc.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/db8500_pincfg.h>
+
+#include "db8500_pins.h"
+
+/*
+ * Get a global data pointer
+ */
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Memory controller register
+ */
+#define DMC_BASE_ADDR 0x80156000
+#define DMC_CTL_97 (DMC_BASE_ADDR + 0x184)
+
+/*
+ * GPIO pin config common for MOP500/HREF boards
+ */
+unsigned long gpio_cfg_common[] = {
+ /* I2C */
+ GPIO147_I2C0_SCL,
+ GPIO148_I2C0_SDA,
+ GPIO16_I2C1_SCL,
+ GPIO17_I2C1_SDA,
+ GPIO10_I2C2_SDA,
+ GPIO11_I2C2_SCL,
+ GPIO229_I2C3_SDA,
+ GPIO230_I2C3_SCL,
+
+ /* SSP0, to AB8500 */
+ GPIO143_SSP0_CLK,
+ GPIO144_SSP0_FRM,
+ GPIO145_SSP0_RXD | PIN_PULL_DOWN,
+ GPIO146_SSP0_TXD,
+
+ /* MMC0 (MicroSD card) */
+ GPIO18_MC0_CMDDIR | PIN_OUTPUT_HIGH,
+ GPIO19_MC0_DAT0DIR | PIN_OUTPUT_HIGH,
+ GPIO20_MC0_DAT2DIR | PIN_OUTPUT_HIGH,
+ GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH,
+ GPIO22_MC0_FBCLK | PIN_INPUT_NOPULL,
+ GPIO23_MC0_CLK | PIN_OUTPUT_LOW,
+ GPIO24_MC0_CMD | PIN_INPUT_PULLUP,
+ GPIO25_MC0_DAT0 | PIN_INPUT_PULLUP,
+ GPIO26_MC0_DAT1 | PIN_INPUT_PULLUP,
+ GPIO27_MC0_DAT2 | PIN_INPUT_PULLUP,
+ GPIO28_MC0_DAT3 | PIN_INPUT_PULLUP,
+
+ /* MMC4 (On-board eMMC) */
+ GPIO197_MC4_DAT3 | PIN_INPUT_PULLUP,
+ GPIO198_MC4_DAT2 | PIN_INPUT_PULLUP,
+ GPIO199_MC4_DAT1 | PIN_INPUT_PULLUP,
+ GPIO200_MC4_DAT0 | PIN_INPUT_PULLUP,
+ GPIO201_MC4_CMD | PIN_INPUT_PULLUP,
+ GPIO202_MC4_FBCLK | PIN_INPUT_NOPULL,
+ GPIO203_MC4_CLK | PIN_OUTPUT_LOW,
+ GPIO204_MC4_DAT7 | PIN_INPUT_PULLUP,
+ GPIO205_MC4_DAT6 | PIN_INPUT_PULLUP,
+ GPIO206_MC4_DAT5 | PIN_INPUT_PULLUP,
+ GPIO207_MC4_DAT4 | PIN_INPUT_PULLUP,
+
+ /* UART2, console */
+ GPIO29_U2_RXD | PIN_INPUT_PULLUP,
+ GPIO30_U2_TXD | PIN_OUTPUT_HIGH,
+ GPIO31_U2_CTSn | PIN_INPUT_PULLUP,
+ GPIO32_U2_RTSn | PIN_OUTPUT_HIGH,
+
+ /*
+ * USB, pin 256-267 USB, Is probably already setup correctly from
+ * BootROM/boot stages, but we don't trust that and set it up anyway
+ */
+ GPIO256_USB_NXT,
+ GPIO257_USB_STP,
+ GPIO258_USB_XCLK,
+ GPIO259_USB_DIR,
+ GPIO260_USB_DAT7,
+ GPIO261_USB_DAT6,
+ GPIO262_USB_DAT5,
+ GPIO263_USB_DAT4,
+ GPIO264_USB_DAT3,
+ GPIO265_USB_DAT2,
+ GPIO266_USB_DAT1,
+ GPIO267_USB_DAT0,
+};
+
+unsigned long gpio_cfg_snowball[] = {
+ /* MMC0 (MicroSD card) */
+ GPIO217_GPIO | PIN_OUTPUT_HIGH, /* MMC_EN */
+ GPIO218_GPIO | PIN_INPUT_NOPULL, /* MMC_CD */
+ GPIO228_GPIO | PIN_OUTPUT_HIGH, /* SD_SEL */
+
+ /* eMMC */
+ GPIO167_GPIO | PIN_OUTPUT_HIGH, /* RSTn_MLC */
+
+ /* LAN */
+ GPIO131_SM_ADQ8,
+ GPIO132_SM_ADQ9,
+ GPIO133_SM_ADQ10,
+ GPIO134_SM_ADQ11,
+ GPIO135_SM_ADQ12,
+ GPIO136_SM_ADQ13,
+ GPIO137_SM_ADQ14,
+ GPIO138_SM_ADQ15,
+
+ /* RSTn_LAN */
+ GPIO141_GPIO | PIN_OUTPUT_HIGH,
+};
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+
+int board_init(void)
+{
+ /*
+ * Setup board (bd) and board-info (bi).
+ * bi_arch_number: Unique id for this board. It will passed in r1 to
+ * Linux startup code and is the machine_id.
+ * bi_boot_params: Where this board expects params.
+ */
+ gd->bd->bi_arch_number = MACH_TYPE_SNOWBALL;
+ gd->bd->bi_boot_params = 0x00000100;
+
+ /* Configure GPIO pins needed by U-boot */
+ db8500_gpio_config_pins(gpio_cfg_common, ARRAY_SIZE(gpio_cfg_common));
+
+ db8500_gpio_config_pins(gpio_cfg_snowball,
+ ARRAY_SIZE(gpio_cfg_snowball));
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->ram_size = gd->bd->bi_dram[0].size =
+ get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_MAX_RAM_SIZE);
+
+ return 0;
+}
diff --git a/boards.cfg b/boards.cfg
index 0837c16..a16c487 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -269,6 +269,7 @@ seaboard arm armv7 seaboard nvidia
ventana arm armv7 ventana nvidia tegra2
whistler arm armv7 whistler nvidia tegra2
u8500_href arm armv7 u8500 st-ericsson u8500
+snowball arm armv7 snowball st-ericsson u8500
actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2
actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB
actux1_8_16 arm ixp actux1 - - actux1:FLASH1X8
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index c77c631..3c67599 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -42,6 +42,7 @@ COBJS-$(CONFIG_ALTERA_PIO) += altera_pio.o
COBJS-$(CONFIG_MPC83XX_GPIO) += mpc83xx_gpio.o
COBJS-$(CONFIG_SH_GPIO_PFC) += sh_pfc.o
COBJS-$(CONFIG_OMAP_GPIO) += omap_gpio.o
+COBJS-$(CONFIG_DB8500_GPIO) += db8500_gpio.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
diff --git a/drivers/gpio/db8500_gpio.c b/drivers/gpio/db8500_gpio.c
new file mode 100644
index 0000000..d5cb383
--- /dev/null
+++ b/drivers/gpio/db8500_gpio.c
@@ -0,0 +1,221 @@
+/*
+ * Code ported from Nomadik GPIO driver in ST-Ericsson Linux kernel code.
+ * The purpose is that GPIO config found in kernel should work by simply
+ * copy-paste it to U-boot.
+ *
+ * Original Linux authors:
+ * Copyright (C) 2008,2009 STMicroelectronics
+ * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it>
+ * Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com>
+ *
+ * Ported to U-boot by:
+ * Copyright (C) 2010 Joakim Axelsson <joakim.axelsson AT stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+
+#include <asm/arch/db8500_gpio.h>
+#include <asm/arch/db8500_pincfg.h>
+#include <linux/compiler.h>
+
+#define IO_ADDR(x) (void *) (x)
+
+/*
+ * The GPIO module in the db8500 Systems-on-Chip is an
+ * AMBA device, managing 32 pins and alternate functions. The logic block
+ * is currently only used in the db8500.
+ */
+
+#define GPIO_TOTAL_PINS 268
+#define GPIO_PINS_PER_BLOCK 32
+#define GPIO_BLOCKS_COUNT (GPIO_TOTAL_PINS/GPIO_PINS_PER_BLOCK + 1)
+#define GPIO_BLOCK(pin) (((pin + GPIO_PINS_PER_BLOCK) >> 5) - 1)
+#define GPIO_PIN_WITHIN_BLOCK(pin) ((pin)%(GPIO_PINS_PER_BLOCK))
+
+/* Register in the logic block */
+#define DB8500_GPIO_DAT 0x00
+#define DB8500_GPIO_DATS 0x04
+#define DB8500_GPIO_DATC 0x08
+#define DB8500_GPIO_PDIS 0x0c
+#define DB8500_GPIO_DIR 0x10
+#define DB8500_GPIO_DIRS 0x14
+#define DB8500_GPIO_DIRC 0x18
+#define DB8500_GPIO_SLPC 0x1c
+#define DB8500_GPIO_AFSLA 0x20
+#define DB8500_GPIO_AFSLB 0x24
+
+#define DB8500_GPIO_RIMSC 0x40
+#define DB8500_GPIO_FIMSC 0x44
+#define DB8500_GPIO_IS 0x48
+#define DB8500_GPIO_IC 0x4c
+#define DB8500_GPIO_RWIMSC 0x50
+#define DB8500_GPIO_FWIMSC 0x54
+#define DB8500_GPIO_WKS 0x58
+
+static void __iomem *get_gpio_addr(unsigned gpio)
+{
+ /* Our list of GPIO chips */
+ static void __iomem *gpio_addrs[GPIO_BLOCKS_COUNT] = {
+ IO_ADDR(CFG_GPIO_0_BASE),
+ IO_ADDR(CFG_GPIO_1_BASE),
+ IO_ADDR(CFG_GPIO_2_BASE),
+ IO_ADDR(CFG_GPIO_3_BASE),
+ IO_ADDR(CFG_GPIO_4_BASE),
+ IO_ADDR(CFG_GPIO_5_BASE),
+ IO_ADDR(CFG_GPIO_6_BASE),
+ IO_ADDR(CFG_GPIO_7_BASE),
+ IO_ADDR(CFG_GPIO_8_BASE)
+ };
+
+ return gpio_addrs[GPIO_BLOCK(gpio)];
+}
+
+static unsigned get_gpio_offset(unsigned gpio)
+{
+ return GPIO_PIN_WITHIN_BLOCK(gpio);
+}
+
+/* Can only be called from config_pin. Don't configure alt-mode directly */
+static void gpio_set_mode(unsigned gpio, enum db8500_gpio_alt mode)
+{
+ void __iomem *addr = get_gpio_addr(gpio);
+ unsigned offset = get_gpio_offset(gpio);
+ u32 bit = 1 << offset;
+ u32 afunc, bfunc;
+
+ afunc = readl(addr + DB8500_GPIO_AFSLA) & ~bit;
+ bfunc = readl(addr + DB8500_GPIO_AFSLB) & ~bit;
+ if (mode & DB8500_GPIO_ALT_A)
+ afunc |= bit;
+ if (mode & DB8500_GPIO_ALT_B)
+ bfunc |= bit;
+ writel(afunc, addr + DB8500_GPIO_AFSLA);
+ writel(bfunc, addr + DB8500_GPIO_AFSLB);
+}
+
+/**
+ * db8500_gpio_set_pull() - enable/disable pull up/down on a gpio
+ * @gpio: pin number
+ * @pull: one of DB8500_GPIO_PULL_DOWN, DB8500_GPIO_PULL_UP,
+ * and DB8500_GPIO_PULL_NONE
+ *
+ * Enables/disables pull up/down on a specified pin. This only takes effect if
+ * the pin is configured as an input (either explicitly or by the alternate
+ * function).
+ *
+ * NOTE: If enabling the pull up/down, the caller must ensure that the GPIO is
+ * configured as an input. Otherwise, due to the way the controller registers
+ * work, this function will change the value output on the pin.
+ */
+void db8500_gpio_set_pull(unsigned gpio, enum db8500_gpio_pull pull)
+{
+ void __iomem *addr = get_gpio_addr(gpio);
+ unsigned offset = get_gpio_offset(gpio);
+ u32 bit = 1 << offset;
+ u32 pdis;
+
+ pdis = readl(addr + DB8500_GPIO_PDIS);
+ if (pull == DB8500_GPIO_PULL_NONE)
+ pdis |= bit;
+ else
+ pdis &= ~bit;
+ writel(pdis, addr + DB8500_GPIO_PDIS);
+
+ if (pull == DB8500_GPIO_PULL_UP)
+ writel(bit, addr + DB8500_GPIO_DATS);
+ else if (pull == DB8500_GPIO_PULL_DOWN)
+ writel(bit, addr + DB8500_GPIO_DATC);
+}
+
+void db8500_gpio_make_input(unsigned gpio)
+{
+ void __iomem *addr = get_gpio_addr(gpio);
+ unsigned offset = get_gpio_offset(gpio);
+
+ writel(1 << offset, addr + DB8500_GPIO_DIRC);
+}
+
+int db8500_gpio_get_input(unsigned gpio)
+{
+ void __iomem *addr = get_gpio_addr(gpio);
+ unsigned offset = get_gpio_offset(gpio);
+ u32 bit = 1 << offset;
+
+ printf("db8500_gpio_get_input gpio=%u addr=%p offset=%u bit=%#x\n",
+ gpio, addr, offset, bit);
+
+ return (readl(addr + DB8500_GPIO_DAT) & bit) != 0;
+}
+
+void db8500_gpio_make_output(unsigned gpio, int val)
+{
+ void __iomem *addr = get_gpio_addr(gpio);
+ unsigned offset = get_gpio_offset(gpio);
+
+ writel(1 << offset, addr + DB8500_GPIO_DIRS);
+ db8500_gpio_set_output(gpio, val);
+}
+
+void db8500_gpio_set_output(unsigned gpio, int val)
+{
+ void __iomem *addr = get_gpio_addr(gpio);
+ unsigned offset = get_gpio_offset(gpio);
+
+ if (val)
+ writel(1 << offset, addr + DB8500_GPIO_DATS);
+ else
+ writel(1 << offset, addr + DB8500_GPIO_DATC);
+}
+
+/**
+ * config_pin - configure a pin's mux attributes
+ * @cfg: pin confguration
+ *
+ * Configures a pin's mode (alternate function or GPIO), its pull up status,
+ * and its sleep mode based on the specified configuration. The @cfg is
+ * usually one of the SoC specific macros defined in mach/<soc>-pins.h. These
+ * are constructed using, and can be further enhanced with, the macros in
+ * plat/pincfg.h.
+ *
+ * If a pin's mode is set to GPIO, it is configured as an input to avoid
+ * side-effects. The gpio can be manipulated later using standard GPIO API
+ * calls.
+ */
+static void config_pin(unsigned long cfg)
+{
+ int pin = PIN_NUM(cfg);
+ int pull = PIN_PULL(cfg);
+ int af = PIN_ALT(cfg);
+ int output = PIN_DIR(cfg);
+ int val = PIN_VAL(cfg);
+
+ if (output)
+ db8500_gpio_make_output(pin, val);
+ else {
+ db8500_gpio_make_input(pin);
+ db8500_gpio_set_pull(pin, pull);
+ }
+
+ gpio_set_mode(pin, af);
+}
+
+/**
+ * db8500_config_pins - configure several pins at once
+ * @cfgs: array of pin configurations
+ * @num: number of elments in the array
+ *
+ * Configures several pins using config_pin(). Refer to that function for
+ * further information.
+ */
+void db8500_gpio_config_pins(unsigned long *cfgs, size_t num)
+{
+ size_t i;
+
+ for (i = 0; i < num; i++)
+ config_pin(cfgs[i]);
+}
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index ed581ae..d4c5137 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -156,6 +156,8 @@ int serial_init (void)
writel(lcr, &regs->fr);
writel(lcr, &regs->pl011_rlcr);
+ /* lcrh needs to be set again for change to be effective */
+ writel(lcr, &regs->pl011_lcrh);
}
#endif
/* Finally, enable the UART */
diff --git a/include/configs/snowball.h b/include/configs/snowball.h
new file mode 100644
index 0000000..9877513
--- /dev/null
+++ b/include/configs/snowball.h
@@ -0,0 +1,256 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2009
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * #define DEBUG 1
+ */
+
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_SNOWBALL
+#define CONFIG_SYS_ICACHE_OFF
+#define CONFIG_SYS_DCACHE_OFF
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_U8500
+#define CONFIG_L2_OFF
+
+#define CONFIG_SYS_MEMTEST_START 0x00000000
+#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF
+#define CONFIG_SYS_HZ 1000 /* must be 1000 */
+
+/*-----------------------------------------------------------------------
+ * Size of environment and malloc() pool
+ */
+/*
+ * If you use U-Boot as crash kernel, make sure that it does not overwrite
+ * information saved by kexec during panic. Kexec expects the start
+ * address of the executable 32K above "crashkernel" address.
+ */
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE (8*1024)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024)
+
+#define CONFIG_SYS_GBL_DATA_SIZE 128 /* for initial data */
+
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_SAVEENV
+#define CONFIG_ENV_OFFSET 0x0118000
+#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */
+
+/*
+ * PL011 Configuration
+ */
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_SERIAL_RLCR
+#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT
+
+/*
+ * U8500 UART registers base for 3 serial devices
+ */
+#define CFG_UART0_BASE 0x80120000
+#define CFG_UART1_BASE 0x80121000
+#define CFG_UART2_BASE 0x80007000
+#define CFG_SERIAL0 CFG_UART0_BASE
+#define CFG_SERIAL1 CFG_UART1_BASE
+#define CFG_SERIAL2 CFG_UART2_BASE
+#define CONFIG_PL011_CLOCK 38400000
+#define CONFIG_PL01x_PORTS { (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \
+ (void *)CFG_SERIAL2 }
+#define CONFIG_CONS_INDEX 2
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * Devices and file systems
+ */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DOS_PARTITION
+
+/*
+ * Commands
+ */
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_CONSOLE
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_SOURCE
+
+#ifndef CONFIG_BOOTDELAY
+#define CONFIG_BOOTDELAY 1
+#endif
+#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
+
+#undef CONFIG_BOOTARGS
+#define CONFIG_BOOTCOMMAND \
+"mmc dev 1; " \
+ "if run loadbootscript; " \
+ "then run bootscript; " \
+ "else " \
+ "if run mmcload; " \
+ "then run mmcboot; " \
+ "else " \
+ "mmc dev 0; " \
+ "if run emmcloadbootscript; " \
+ "then run bootscript; " \
+ "else " \
+ "if run emmcload; " \
+ "then run emmcboot; " \
+ "else " \
+ "echo No media to boot from; " \
+ "fi; " \
+ "fi; " \
+ "fi; " \
+ "fi; "
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "verify=n\0" \
+ "loadaddr=0x00100000\0" \
+ "console=ttyAMA2,115200n8\0" \
+ "loadbootscript=fatload mmc 1:1 ${loadaddr} boot.scr\0" \
+ "emmcloadbootscript=fatload mmc 0:2 ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript " \
+ "from mmc ...; source ${loadaddr}\0" \
+ "memargs256=mem=96M@0 mem_modem=32M@96M mem=32M@128M " \
+ "hwmem=22M@160M pmem_hwb=42M@182M mem_mali=32@224M\0" \
+ "memargs512=mem=96M@0 mem_modem=32M@96M hwmem=32M@128M " \
+ "mem=64M@160M mem_mali=32M@224M " \
+ "pmem_hwb=128M@256M mem=128M@384M\0" \
+ "memargs1024=mem=128M@0 mali.mali_mem=32M@128M " \
+ "hwmem=168M@M160M mem=48M@328M " \
+ "mem_issw=1M@383M mem=640M@384M\0" \
+ "memargs=setenv bootargs ${bootargs} ${memargs1024}\0" \
+ "emmcload=fatload mmc 0:2 ${loadaddr} uImage\0" \
+ "mmcload=fatload mmc 1:1 ${loadaddr} uImage\0" \
+ "commonargs=setenv bootargs console=${console} " \
+ "vmalloc=300M\0" \
+ "emmcargs=setenv bootargs ${bootargs} " \
+ "root=/dev/mmcblk0p3 " \
+ "rootwait\0" \
+ "addcons=setenv bootargs ${bootargs} " \
+ "console=${console}\0" \
+ "emmcboot=echo Booting from eMMC ...; " \
+ "run commonargs emmcargs memargs; " \
+ "bootm ${loadaddr}\0" \
+ "mmcargs=setenv bootargs ${bootargs} " \
+ "root=/dev/mmcblk1p2 " \
+ "rootwait earlyprintk\0" \
+ "mmcboot=echo Booting from external MMC ...; " \
+ "run commonargs mmcargs memargs; " \
+ "bootm ${loadaddr}\0" \
+ "fdt_high=0x2BC00000\0" \
+ "stdout=serial,usbtty\0" \
+ "stdin=serial,usbtty\0" \
+ "stderr=serial,usbtty\0"
+
+/*-----------------------------------------------------------------------
+ * Miscellaneous configurable options
+ */
+
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "U8500 $ " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
+ + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
+
+#undef CONFIG_SYS_CLKS_IN_HZ /* everything, incl board info, in Hz */
+#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1
+
+#define CONFIG_SYS_HUSH_PARSER 1
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_SETUP_MEMORY_TAGS 2
+#define CONFIG_INITRD_TAG 1
+#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */
+
+/*
+ * additions for new relocation code
+ */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_MAX_RAM_SIZE 0x40000000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x100000
+#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
+
+/* landing address before relocation */
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE 0x0
+#endif
+
+/*
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * base register values for U8500
+ */
+#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock */
+
+
+/*
+ * U8500 GPIO register base for 9 banks
+ */
+#define CONFIG_DB8500_GPIO
+#define CFG_GPIO_0_BASE 0x8012E000
+#define CFG_GPIO_1_BASE 0x8012E080
+#define CFG_GPIO_2_BASE 0x8000E000
+#define CFG_GPIO_3_BASE 0x8000E080
+#define CFG_GPIO_4_BASE 0x8000E100
+#define CFG_GPIO_5_BASE 0x8000E180
+#define CFG_GPIO_6_BASE 0x8011E000
+#define CFG_GPIO_7_BASE 0x8011E080
+#define CFG_GPIO_8_BASE 0xA03FE000
+
+#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */
+
+#endif /* __CONFIG_H */
generated by cgit v1.1 at 2024-11-25 19:18:13 +0000