diff options
| -rw-r--r-- | board/sbc8548/sbc8548.c | 63 | ||||
| -rw-r--r-- | include/configs/sbc8548.h | 9 |
2 files changed, 6 insertions, 66 deletions
diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index fc78a7c..fff7dab 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -314,35 +314,9 @@ long int fixed_sdram (void) } #endif -#if defined(CONFIG_PCI) || defined(CONFIG_PCI1) -/* For some reason the Tundra PCI bridge shows up on itself as a - * different device. Work around that by refusing to configure it. - */ -void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { } - -static struct pci_config_table pci_sbc8548_config_table[] = { - {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}}, - {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}}, - {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1, - mpc85xx_config_via_usbide, {0,0,0}}, - {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2, - mpc85xx_config_via_usb, {0,0,0}}, - {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3, - mpc85xx_config_via_usb2, {0,0,0}}, - {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5, - mpc85xx_config_via_power, {0,0,0}}, - {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6, - mpc85xx_config_via_ac97, {0,0,0}}, - {}, -}; - -static struct pci_controller pci1_hose = { - config_table: pci_sbc8548_config_table}; -#endif /* CONFIG_PCI */ - -#ifdef CONFIG_PCI2 -static struct pci_controller pci2_hose; -#endif /* CONFIG_PCI2 */ +#ifdef CONFIG_PCI1 +static struct pci_controller pci1_hose; +#endif /* CONFIG_PCI1 */ #ifdef CONFIG_PCIE1 static struct pci_controller pcie1_hose; @@ -359,24 +333,20 @@ pci_init_board(void) { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR; struct pci_controller *hose = &pci1_hose; - struct pci_config_table *table; struct pci_region *r = hose->regions; uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */ uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */ uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */ - uint pci_agent = is_fsl_pci_agent(LAW_TRGT_IF_PCI_1, host_agent); - uint pci_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */ if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) { - printf (" PCI: %d bit, %s MHz, %s, %s, %s\n", + printf (" PCI host: %d bit, %s MHz, %s, %s\n", (pci_32) ? 32 : 64, (pci_speed == 33333000) ? "33" : (pci_speed == 66666000) ? "66" : "unknown", pci_clk_sel ? "sync" : "async", - pci_agent ? "agent" : "host", pci_arb ? "arbiter" : "external-arbiter" ); @@ -395,12 +365,6 @@ pci_init_board(void) PCI_REGION_IO); hose->region_count = r - hose->regions; - /* relocate config table pointers */ - hose->config_table = \ - (struct pci_config_table *)((uint)hose->config_table + gd->reloc_off); - for (table = hose->config_table; table && table->vendor; table++) - table->config_device += gd->reloc_off; - hose->first_busno=first_free_busno; fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data); @@ -425,33 +389,18 @@ pci_init_board(void) gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */ #endif -#ifdef CONFIG_PCI2 -{ - uint pci2_clk_sel = gur->porpllsr & 0x4000; /* PORPLLSR[17] */ - uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */ - if (pci_dual) { - printf (" PCI2: 32 bit, 66 MHz, %s\n", - pci2_clk_sel ? "sync" : "async"); - } else { - printf (" PCI2: disabled\n"); - } -} -#else - gur->devdisr |= MPC85xx_DEVDISR_PCI2; /* disable */ -#endif /* CONFIG_PCI2 */ + gur->devdisr |= MPC85xx_DEVDISR_PCI2; /* disable PCI2 */ #ifdef CONFIG_PCIE1 { volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCIE1_ADDR; struct pci_controller *hose = &pcie1_hose; - int pcie_ep = is_fsl_pci_agent(LAW_TRGT_IF_PCIE_1, host_agent); struct pci_region *r = hose->regions; int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel); if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){ - printf ("\n PCIE connected to slot as %s (base address %x)", - pcie_ep ? "End Point" : "Root Complex", + printf ("\n PCIE at base address %x", (uint)pci); if (pci->pme_msg_det) { diff --git a/include/configs/sbc8548.h b/include/configs/sbc8548.h index 838b4db..3d05afb 100644 --- a/include/configs/sbc8548.h +++ b/include/configs/sbc8548.h @@ -42,7 +42,6 @@ #undef CONFIG_PCI1 /* PCI controller 1 */ #undef CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ #undef CONFIG_RIO -#undef CONFIG_PCI2 #undef CONFIG_FSL_PCI_INIT /* Use common FSL init code */ #define CONFIG_TSEC_ENET /* tsec ethernet support */ @@ -343,14 +342,6 @@ #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 512M */ #endif -#ifdef CONFIG_LEGACY -#define BRIDGE_ID 17 -#define VIA_ID 2 -#else -#define BRIDGE_ID 28 -#define VIA_ID 4 -#endif - #if defined(CONFIG_PCI) #define CONFIG_NET_MULTI |