diff options
-rw-r--r-- | arch/powerpc/cpu/ppc4xx/Kconfig | 4 | ||||
-rw-r--r-- | board/korat/Kconfig | 9 | ||||
-rw-r--r-- | board/korat/MAINTAINERS | 7 | ||||
-rw-r--r-- | board/korat/Makefile | 9 | ||||
-rw-r--r-- | board/korat/README | 64 | ||||
-rw-r--r-- | board/korat/config.mk | 27 | ||||
-rw-r--r-- | board/korat/init.S | 80 | ||||
-rw-r--r-- | board/korat/korat.c | 633 | ||||
-rw-r--r-- | board/korat/u-boot-F7FC.lds | 124 | ||||
-rw-r--r-- | configs/korat_defconfig | 3 | ||||
-rw-r--r-- | configs/korat_perm_defconfig | 4 | ||||
-rw-r--r-- | doc/README.scrapyard | 1 | ||||
-rw-r--r-- | include/configs/korat.h | 550 |
13 files changed, 1 insertions, 1514 deletions
diff --git a/arch/powerpc/cpu/ppc4xx/Kconfig b/arch/powerpc/cpu/ppc4xx/Kconfig index 75e4507..9e52d3f 100644 --- a/arch/powerpc/cpu/ppc4xx/Kconfig +++ b/arch/powerpc/cpu/ppc4xx/Kconfig @@ -13,9 +13,6 @@ config TARGET_CSB272 config TARGET_CSB472 bool "Support csb472" -config TARGET_KORAT - bool "Support korat" - config TARGET_LWMON5 bool "Support lwmon5" select SUPPORT_SPL @@ -195,7 +192,6 @@ source "board/gdsys/405ex/Kconfig" source "board/gdsys/dlvision/Kconfig" source "board/gdsys/gdppc440etx/Kconfig" source "board/gdsys/intip/Kconfig" -source "board/korat/Kconfig" source "board/lwmon5/Kconfig" source "board/mosaixtech/icon/Kconfig" source "board/mpl/mip405/Kconfig" diff --git a/board/korat/Kconfig b/board/korat/Kconfig deleted file mode 100644 index f434dea..0000000 --- a/board/korat/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_KORAT - -config SYS_BOARD - default "korat" - -config SYS_CONFIG_NAME - default "korat" - -endif diff --git a/board/korat/MAINTAINERS b/board/korat/MAINTAINERS deleted file mode 100644 index 8b96846..0000000 --- a/board/korat/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -KORAT BOARD -M: Larry Johnson <lrj@acm.org> -S: Maintained -F: board/korat/ -F: include/configs/korat.h -F: configs/korat_defconfig -F: configs/korat_perm_defconfig diff --git a/board/korat/Makefile b/board/korat/Makefile deleted file mode 100644 index 63914bc..0000000 --- a/board/korat/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2002-2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y = korat.o -extra-y += init.o diff --git a/board/korat/README b/board/korat/README deleted file mode 100644 index e059f78..0000000 --- a/board/korat/README +++ /dev/null @@ -1,64 +0,0 @@ -The Korat board has two NOR flashes, FLASH0 and FLASH1, which are connected to -chip select 0 and 1, respectively. FLASH0 contains 16 MiB, and is mapped to -addresses 0xFF000000 - 0xFFFFFFFF as U-Boot Flash Bank #2. FLASH1 contains -from 16 to 128 MiB, and is mapped to 0xF?000000 - 0xF7FFFFFF as U-Boot Flash -Bank #1 (with the starting address depending on the flash size detected at -runtime). The write-enable pin on FLASH0 is disabled, so the contents of FLASH0 -cannot be modified in the field. This also prevents FLASH0 from executing -commands to return chip information, so its configuration is hard-coded in -U-Boot. - -There are two versions of U-Boot for Korat: "permanent" and "upgradable". The -permanent U-Boot is pre-programmed at the top of FLASH0, e.g., at addresses -0xFFFA0000 - 0xFFFFFFFF for the current 384 KiB size. The upgradable U-Boot is -located 256 KiB from the top of FLASH1, e.g. at addresses 0xF7F6000 - 0xF7FC0000 -for the current 384 KiB size. FLASH1 addresses 0xF7FE0000 - 0xF7FF0000 are -used for the U-Boot environmental parameters, and addresses 0xF7FC0000 - -0xF7FDFFFF are used for the redundant copy of the parameters. These locations -are used by both versions of U-Boot. - -On booting, the permanent U-Boot in FLASH0 begins executing. After performing -minimal setup, it monitors the state of the board's Reset switch (GPIO47). If -the switch is sensed as open before a timeout period, then U-Boot branches to -address 0xF7FBFFFC. This causes the upgradable U-Boot to execute from the -beginning. If the switch remains closed thoughout the timeout period, the -permanent U-Boot activates the on-board buzzer until the switch is sensed as -opened. It then continues to execute without branching to FLASH1. The effect -of this is that normally the Korat board boots its upgradable U-Boot, but, if -this has been corrupted, the user can boot the permanent U-Boot, which can then -be used to erase and reload FLASH1 as needed. - -Note that it is not necessary for the permanent U-Boot to have all the latest -features, but only that it have sufficient functionality (working "tftp", -"erase", "cp.b", etc.) to repair FLASH1. Also, the permanent U-Boot makes no -assumptions about the size of FLASH1 or the size of the upgradable U-Boot: it is -sufficient that the upgradable U-Boot can be started by a branch to 0xF7FBFFFC. - -The build sequence: - - make korat_perm_config - make all - -builds the permanent U-Boot by selecting loader file "u-boot.lds" and defining -preprocessor symbol "CONFIG_KORAT_PERMANENT". The default build: - - make korat_config - make all - -creates the upgradable U-Boot by selecting loader file "u-boot-F7FC.lds" and -leaving preprocessor symbol "CONFIG_KORAT_PERMANENT" undefined. - -2008-02-22, Larry Johnson <lrj@acm.org> - - -The CompactFlash(R) controller on the Korat board provides a hi-speed USB -interface. This may be connected to either a dedicated port on the on-board -USB controller, or to a USB port on the PowerPC 440EPx processor. The U-Boot -environment variable "korat_usbcf" can be used to specify which of these two -USB host ports is used for CompactFlash. The valid setting for the variable are -the strings "pci" and "ppc". If the variable defined and set to "ppc", then the -PowerPC USB port is used. In all other cases the on-board USB controller is -used, but if "korat_usbcf" is defined but is set to a string other than the two -valid options, a warning is also issued. - -2009-01-28, Larry Johnson <lrj@acm.org> diff --git a/board/korat/config.mk b/board/korat/config.mk deleted file mode 100644 index 42e0060..0000000 --- a/board/korat/config.mk +++ /dev/null @@ -1,27 +0,0 @@ -# -# (C) Copyright 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# -# -# Korat (PPC440EPx) board -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(emul),1) -PLATFORM_CPPFLAGS += -fno-schedule-insns -fno-schedule-insns2 -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8CFF0000 -endif - -ifndef CONFIG_KORAT_PERMANENT -LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-F7FC.lds -endif diff --git a/board/korat/init.S b/board/korat/init.S deleted file mode 100644 index 20c5bdd..0000000 --- a/board/korat/init.S +++ /dev/null @@ -1,80 +0,0 @@ -/* - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm-offsets.h> -#include <ppc_asm.tmpl> -#include <asm/mmu.h> -#include <config.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - - /* - * BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the - * speed up boot process. It is patched after relocation to enable SA_I - */ - tlbentry( 0xF0000000, SZ_256M, 0xF0000000, 1, AC_RWX | SA_G ) - - /* - * TLB entries for SDRAM are not needed on this platform. They are - * generated dynamically in the SPD DDR2 detection routine. - */ - -#ifdef CONFIG_SYS_INIT_RAM_DCACHE - /* TLB-entry for init-ram in dcache (SA_I must be turned off!) */ - tlbentry( CONFIG_SYS_INIT_RAM_ADDR, SZ_64K, CONFIG_SYS_INIT_RAM_ADDR, 0, - AC_RWX | SA_G ) -#endif - - /* TLB-entry for PCI Memory */ - tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x00000000, SZ_256M, - CONFIG_SYS_PCI_MEMBASE + 0x00000000, 1, AC_RW | SA_IG ) - - tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x10000000, SZ_256M, - CONFIG_SYS_PCI_MEMBASE + 0x10000000, 1, AC_RW | SA_IG ) - - tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x20000000, SZ_256M, - CONFIG_SYS_PCI_MEMBASE + 0x20000000, 1, AC_RW | SA_IG ) - - tlbentry( CONFIG_SYS_PCI_MEMBASE + 0x30000000, SZ_256M, - CONFIG_SYS_PCI_MEMBASE + 0x30000000, 1, AC_RW | SA_IG ) - - /* TLB-entry for EBC */ - tlbentry( CONFIG_SYS_CPLD_BASE, SZ_1K, CONFIG_SYS_CPLD_BASE, 1, AC_RW | SA_IG ) - - /* TLB-entry for Internal Registers & OCM */ - /* I wonder why this must be executable -- lrj@acm.org 2007-10-08 */ - tlbentry( 0xE0000000, SZ_16M, 0xE0000000, 0, AC_RWX | SA_I ) - - /*TLB-entry PCI registers*/ - tlbentry( 0xEEC00000, SZ_1K, 0xEEC00000, 1, AC_RW | SA_IG ) - - /* TLB-entry for peripherals */ - tlbentry( 0xEF000000, SZ_16M, 0xEF000000, 1, AC_RW | SA_IG) - - /* TLB-entry PCI IO Space - from sr@denx.de */ - tlbentry(0xE8000000, SZ_64K, 0xE8000000, 1, AC_RW | SA_IG) - - tlbtab_end - -#if defined(CONFIG_KORAT_PERMANENT) - .globl korat_branch_absolute -korat_branch_absolute: - mtlr r3 - blr -#endif diff --git a/board/korat/korat.c b/board/korat/korat.c deleted file mode 100644 index d9ab2fd..0000000 --- a/board/korat/korat.c +++ /dev/null @@ -1,633 +0,0 @@ -/* - * (C) Copyright 2007-2010 - * Larry Johnson, lrj@acm.org - * - * (C) Copyright 2006-2007 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2006 - * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com - * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <fdt_support.h> -#include <i2c.h> -#include <libfdt.h> -#include <asm/ppc440.h> -#include <asm/bitops.h> -#include <asm/ppc4xx-gpio.h> -#include <asm/io.h> -#include <asm/ppc4xx-uic.h> -#include <asm/processor.h> -#include <asm/4xx_pci.h> - -DECLARE_GLOBAL_DATA_PTR; - -extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -ulong flash_get_size(ulong base, int banknum); - -#if defined(CONFIG_KORAT_PERMANENT) -void korat_buzzer(int const on) -{ - if (on) { - out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05, - in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05) | 0x80); - } else { - out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05, - in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x05) & ~0x80); - } -} -#endif - -int board_early_init_f(void) -{ - uint32_t sdr0_pfc1, sdr0_pfc2; - uint32_t reg; - int eth; - -#if defined(CONFIG_KORAT_PERMANENT) - unsigned mscount; - - extern void korat_branch_absolute(uint32_t addr); - - for (mscount = 0; mscount < CONFIG_SYS_KORAT_MAN_RESET_MS; ++mscount) { - udelay(1000); - if (gpio_read_in_bit(CONFIG_SYS_GPIO_RESET_PRESSED_)) { - /* This call does not return. */ - korat_branch_absolute( - CONFIG_SYS_FLASH1_TOP - 2 * CONFIG_ENV_SECT_SIZE - 4); - } - } - korat_buzzer(1); - while (!gpio_read_in_bit(CONFIG_SYS_GPIO_RESET_PRESSED_)) - udelay(1000); - - korat_buzzer(0); -#endif - - mtdcr(EBC0_CFGADDR, EBC0_CFG); - mtdcr(EBC0_CFGDATA, 0xb8400000); - - /* - * Setup the interrupt controller polarities, triggers, etc. - */ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - mtdcr(UIC0ER, 0x00000000); /* disable all */ - mtdcr(UIC0CR, 0x00000005); /* ATI & UIC1 crit are critical */ - mtdcr(UIC0PR, 0xfffff7ff); /* per ref-board manual */ - mtdcr(UIC0TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC0VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC0SR, 0xffffffff); /* clear all */ - - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - mtdcr(UIC1ER, 0x00000000); /* disable all */ - mtdcr(UIC1CR, 0x00000000); /* all non-critical */ - mtdcr(UIC1PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC1TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC1VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC1SR, 0xffffffff); /* clear all */ - - mtdcr(UIC2SR, 0xffffffff); /* clear all */ - mtdcr(UIC2ER, 0x00000000); /* disable all */ - mtdcr(UIC2CR, 0x00000000); /* all non-critical */ - mtdcr(UIC2PR, 0xffffffff); /* per ref-board manual */ - mtdcr(UIC2TR, 0x00000000); /* per ref-board manual */ - mtdcr(UIC2VR, 0x00000000); /* int31 highest, base=0x000 */ - mtdcr(UIC2SR, 0xffffffff); /* clear all */ - - /* - * Take sim card reader and CF controller out of reset. Also enable PHY - * auto-detect until board-specific PHY resets are available. - */ - out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x02, 0xC0); - - /* Configure the two Ethernet PHYs. For each PHY, configure for fiber - * if the SFP module is present, and for copper if it is not present. - */ - for (eth = 0; eth < 2; ++eth) { - if (gpio_read_in_bit(CONFIG_SYS_GPIO_SFP0_PRESENT_ + eth)) { - /* SFP module not present: configure PHY for copper. */ - /* Set PHY to autonegotate 10 MB, 100MB, or 1 GB */ - out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03, - in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03) | - 0x06 << (4 * eth)); - } else { - /* SFP module present: configure PHY for fiber and - enable output */ - gpio_write_bit(CONFIG_SYS_GPIO_PHY0_FIBER_SEL + eth, 1); - gpio_write_bit(CONFIG_SYS_GPIO_SFP0_TX_EN_ + eth, 0); - } - } - /* enable Ethernet: set GPIO45 and GPIO46 to 1 */ - gpio_write_bit(CONFIG_SYS_GPIO_PHY0_EN, 1); - gpio_write_bit(CONFIG_SYS_GPIO_PHY1_EN, 1); - - /* Wait 1 ms, then enable Fiber signal detect to PHYs. */ - udelay(1000); - out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03, - in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x03) | 0x88); - - /* select Ethernet (and optionally IIC1) pins */ - mfsdr(SDR0_PFC1, sdr0_pfc1); - sdr0_pfc1 = (sdr0_pfc1 & ~SDR0_PFC1_SELECT_MASK) | - SDR0_PFC1_SELECT_CONFIG_4; -#ifdef CONFIG_I2C_MULTI_BUS - sdr0_pfc1 |= ((sdr0_pfc1 & ~SDR0_PFC1_SIS_MASK) | SDR0_PFC1_SIS_IIC1_SEL); -#endif - mfsdr(SDR0_PFC2, sdr0_pfc2); - sdr0_pfc2 = (sdr0_pfc2 & ~SDR0_PFC2_SELECT_MASK) | - SDR0_PFC2_SELECT_CONFIG_4; - mtsdr(SDR0_PFC2, sdr0_pfc2); - mtsdr(SDR0_PFC1, sdr0_pfc1); - - /* PCI arbiter enabled */ - mfsdr(SDR0_PCI0, reg); - mtsdr(SDR0_PCI0, 0x80000000 | reg); - - return 0; -} - -/* - * The boot flash on CS0 normally has its write-enable pin disabled, and so will - * not respond to CFI commands. This routine therefore fills in the flash - * information for the boot flash. (The flash at CS1 operates normally.) - */ -ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t * info) -{ - uint32_t addr; - int i; - - if (1 != banknum) - return 0; - - info->size = CONFIG_SYS_FLASH0_SIZE; - info->sector_count = CONFIG_SYS_FLASH0_SIZE / 0x20000; - info->flash_id = 0x01000000; - info->portwidth = 2; - info->chipwidth = 2; - info->buffer_size = 32; - info->erase_blk_tout = 16384; - info->write_tout = 2; - info->buffer_write_tout = 5; - info->vendor = 2; - info->cmd_reset = 0x00F0; - info->interface = 2; - info->legacy_unlock = 0; - info->manufacturer_id = 1; - info->device_id = 0x007E; - -#if CONFIG_SYS_FLASH0_SIZE == 0x01000000 - info->device_id2 = 0x2101; -#elif CONFIG_SYS_FLASH0_SIZE == 0x04000000 - info->device_id2 = 0x2301; -#else -#error Unable to set device_id2 for current CONFIG_SYS_FLASH0_SIZE -#endif - - info->ext_addr = 0x0040; - info->cfi_version = 0x3133; - info->cfi_offset = 0x0055; - info->addr_unlock1 = 0x00000555; - info->addr_unlock2 = 0x000002AA; - info->name = "CFI conformant"; - for (i = 0, addr = -info->size; - i < info->sector_count; - ++i, addr += 0x20000) { - info->start[i] = addr; - info->protect[i] = 0x00; - } - return 1; -} - -static int man_data_read(unsigned int addr) -{ - /* - * Read an octet of data from address "addr" in the manufacturer's - * information serial EEPROM, or -1 on error. - */ - u8 data[2]; - - if (0 != i2c_probe(MAN_DATA_EEPROM_ADDR) || - 0 != i2c_read(MAN_DATA_EEPROM_ADDR, addr, 1, data, 1)) { - debug("man_data_read(0x%02X) failed\n", addr); - return -1; - } - debug("man_info_read(0x%02X) returned 0x%02X\n", addr, data[0]); - return data[0]; -} - -static unsigned int man_data_field_addr(unsigned int const field) -{ - /* - * The manufacturer's information serial EEPROM contains a sequence of - * zero-delimited fields. Return the starting address of field "field", - * or 0 on error. - */ - unsigned addr, i; - - if (0 == field || 'A' != man_data_read(0) || '\0' != man_data_read(1)) - /* Only format "A" is currently supported */ - return 0; - - for (addr = 2, i = 1; i < field && addr < 256; ++addr) { - if ('\0' == man_data_read(addr)) - ++i; - } - return (addr < 256) ? addr : 0; -} - -static char *man_data_read_field(char s[], unsigned const field, - unsigned const length) -{ - /* - * Place the null-terminated contents of field "field" of length - * "length" from the manufacturer's information serial EEPROM into - * string "s[length + 1]" and return a pointer to s, or return 0 on - * error. In either case the original contents of s[] is not preserved. - */ - unsigned addr, i; - - addr = man_data_field_addr(field); - if (0 == addr || addr + length >= 255) - return 0; - - for (i = 0; i < length; ++i) { - int const c = man_data_read(addr++); - - if (c <= 0) - return 0; - - s[i] = (char)c; - } - if (0 != man_data_read(addr)) - return 0; - - s[i] = '\0'; - return s; -} - -static void set_serial_number(void) -{ - /* - * If the environmental variable "serial#" is not set, try to set it - * from the manufacturer's information serial EEPROM. - */ - char s[MAN_INFO_LENGTH + MAN_MAC_ADDR_LENGTH + 2]; - - if (getenv("serial#")) - return; - - if (!man_data_read_field(s, MAN_INFO_FIELD, MAN_INFO_LENGTH)) - return; - - s[MAN_INFO_LENGTH] = '-'; - if (!man_data_read_field(s + MAN_INFO_LENGTH + 1, MAN_MAC_ADDR_FIELD, - MAN_MAC_ADDR_LENGTH)) - return; - - setenv("serial#", s); -} - -static void set_mac_addresses(void) -{ - /* - * If the environmental variables "ethaddr" and/or "eth1addr" are not - * set, try to set them from the manufacturer's information serial - * EEPROM. - */ - -#if MAN_MAC_ADDR_LENGTH % 2 != 0 -#error MAN_MAC_ADDR_LENGTH must be an even number -#endif - - char s[(3 * MAN_MAC_ADDR_LENGTH) / 2]; - char *src; - char *dst; - - if (0 != getenv("ethaddr") && 0 != getenv("eth1addr")) - return; - - if (0 == man_data_read_field(s + (MAN_MAC_ADDR_LENGTH / 2) - 1, - MAN_MAC_ADDR_FIELD, MAN_MAC_ADDR_LENGTH)) - return; - - for (src = s + (MAN_MAC_ADDR_LENGTH / 2) - 1, dst = s; src != dst;) { - *dst++ = *src++; - *dst++ = *src++; - *dst++ = ':'; - } - if (0 == getenv("ethaddr")) - setenv("ethaddr", s); - - if (0 == getenv("eth1addr")) { - ++s[((3 * MAN_MAC_ADDR_LENGTH) / 2) - 2]; - setenv("eth1addr", s); - } -} - -int misc_init_r(void) -{ - uint32_t pbcr; - int size_val; - uint32_t reg; - unsigned long usb2d0cr = 0; - unsigned long usb2phy0cr, usb2h0cr = 0; - unsigned long sdr0_pfc1; - uint32_t const flash1_size = gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE; - char const *const act = getenv("usbact"); - char const *const usbcf = getenv("korat_usbcf"); - - /* - * Re-do FLASH1 sizing and adjust flash start and offset. - */ - gd->bd->bi_flashstart = CONFIG_SYS_FLASH1_TOP - flash1_size; - gd->bd->bi_flashoffset = 0; - - mtdcr(EBC0_CFGADDR, PB1CR); - pbcr = mfdcr(EBC0_CFGDATA); - size_val = ffs(flash1_size) - 21; - pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtdcr(EBC0_CFGADDR, PB1CR); - mtdcr(EBC0_CFGDATA, pbcr); - - /* - * Re-check to get correct base address - */ - flash_get_size(gd->bd->bi_flashstart, 0); - - /* - * Re-do FLASH1 sizing and adjust flash offset to reserve space for - * environment - */ - gd->bd->bi_flashoffset = - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - CONFIG_SYS_FLASH1_ADDR; - - mtdcr(EBC0_CFGADDR, PB1CR); - pbcr = mfdcr(EBC0_CFGDATA); - size_val = ffs(gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE) - 21; - pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17); - mtdcr(EBC0_CFGADDR, PB1CR); - mtdcr(EBC0_CFGDATA, pbcr); - - /* Monitor protection ON by default */ -#if defined(CONFIG_KORAT_PERMANENT) - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, - flash_info + 1); -#else - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, - flash_info); -#endif - /* Env protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - flash_info); - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - flash_info); - - /* - * USB suff... - */ - /* - * Select the USB controller on the 440EPx ("ppc") or on the PCI bus - * ("pci") for the CompactFlash. - */ - if (usbcf != NULL && (strcmp(usbcf, "ppc") == 0)) { - /* - * If environment variable "usbcf" is defined and set to "ppc", - * then connect the CompactFlash controller to the PowerPC USB - * port. - */ - printf("Attaching CompactFlash controller to PPC USB\n"); - out_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x02, - in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0x02) | 0x10); - } else { - if (usbcf != NULL && (strcmp(usbcf, "pci") != 0)) - printf("Warning: \"korat_usbcf\" is not set to a legal " - "value (\"ppc\" or \"pci\")\n"); - - printf("Attaching CompactFlash controller to PCI USB\n"); - } - if (act == NULL || strcmp(act, "hostdev") == 0) { - /* SDR Setting */ - mfsdr(SDR0_PFC1, sdr0_pfc1); - mfsdr(SDR0_USB2D0CR, usb2d0cr); - mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); - mfsdr(SDR0_USB2H0CR, usb2h0cr); - - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_16BIT_30MHZ; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; - - /* - * An 8-bit/60MHz interface is the only possible alternative - * when connecting the Device to the PHY - */ - usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; - usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_16BIT_30MHZ; - - /* - * To enable the USB 2.0 Device function - * through the UTMI interface - */ - usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; - usb2d0cr = usb2d0cr | SDR0_USB2D0CR_USB2DEV_SELECTION; - - sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; - sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_USB2D_SEL; - - mtsdr(SDR0_PFC1, sdr0_pfc1); - mtsdr(SDR0_USB2D0CR, usb2d0cr); - mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); - mtsdr(SDR0_USB2H0CR, usb2h0cr); - - /* clear resets */ - udelay(1000); - mtsdr(SDR0_SRST1, 0x00000000); - udelay(1000); - mtsdr(SDR0_SRST0, 0x00000000); - - printf("USB: Host(int phy) Device(ext phy)\n"); - - } else if (strcmp(act, "dev") == 0) { - /*-------------------PATCH-------------------------------*/ - mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); - - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PURDIS; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_HOST; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_HOST; - mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); - - udelay(1000); - mtsdr(SDR0_SRST1, 0x672c6000); - - udelay(1000); - mtsdr(SDR0_SRST0, 0x00000080); - - udelay(1000); - mtsdr(SDR0_SRST1, 0x60206000); - - *(unsigned int *)(0xe0000350) = 0x00000001; - - udelay(1000); - mtsdr(SDR0_SRST1, 0x60306000); - /*-------------------PATCH-------------------------------*/ - - /* SDR Setting */ - mfsdr(SDR0_USB2PHY0CR, usb2phy0cr); - mfsdr(SDR0_USB2H0CR, usb2h0cr); - mfsdr(SDR0_USB2D0CR, usb2d0cr); - mfsdr(SDR0_PFC1, sdr0_pfc1); - - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_XOCLK_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_XOCLK_EXTERNAL; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_WDINT_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_WDINT_8BIT_60MHZ; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DVBUS_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DVBUS_PUREN; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_DWNSTR_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_DWNSTR_DEV; - usb2phy0cr = usb2phy0cr &~SDR0_USB2PHY0CR_UTMICN_MASK; - usb2phy0cr = usb2phy0cr | SDR0_USB2PHY0CR_UTMICN_DEV; - - usb2h0cr = usb2h0cr &~SDR0_USB2H0CR_WDINT_MASK; - usb2h0cr = usb2h0cr | SDR0_USB2H0CR_WDINT_8BIT_60MHZ; - - usb2d0cr = usb2d0cr &~SDR0_USB2D0CR_USB2DEV_EBC_SEL_MASK; - usb2d0cr = usb2d0cr | SDR0_USB2D0CR_EBC_SELECTION; - - sdr0_pfc1 = sdr0_pfc1 &~SDR0_PFC1_UES_MASK; - sdr0_pfc1 = sdr0_pfc1 | SDR0_PFC1_UES_EBCHR_SEL; - - mtsdr(SDR0_USB2H0CR, usb2h0cr); - mtsdr(SDR0_USB2PHY0CR, usb2phy0cr); - mtsdr(SDR0_USB2D0CR, usb2d0cr); - mtsdr(SDR0_PFC1, sdr0_pfc1); - - /* clear resets */ - udelay(1000); - mtsdr(SDR0_SRST1, 0x00000000); - udelay(1000); - mtsdr(SDR0_SRST0, 0x00000000); - - printf("USB: Device(int phy)\n"); - } - - mfsdr(SDR0_SRST1, reg); /* enable security/kasumi engines */ - reg &= ~(SDR0_SRST1_CRYP0 | SDR0_SRST1_KASU0); - mtsdr(SDR0_SRST1, reg); - - /* - * Clear PLB4A0_ACR[WRP] - * This fix will make the MAL burst disabling patch for the Linux - * EMAC driver obsolete. - */ - reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK; - mtdcr(PLB4A0_ACR, reg); - - set_serial_number(); - set_mac_addresses(); - gpio_write_bit(CONFIG_SYS_GPIO_ATMEGA_RESET_, 1); - - return 0; -} - -int checkboard(void) -{ - char const *const s = getenv("serial#"); - u8 const rev = in_8((u8 *) CONFIG_SYS_CPLD_BASE + 0); - - printf("Board: Korat, Rev. %X", rev); - if (s) - printf(", serial# %s", s); - - printf(".\n Ethernet PHY 0: "); - if (gpio_read_out_bit(CONFIG_SYS_GPIO_PHY0_FIBER_SEL)) - printf("fiber"); - else - printf("copper"); - - printf(", PHY 1: "); - if (gpio_read_out_bit(CONFIG_SYS_GPIO_PHY1_FIBER_SEL)) - printf("fiber"); - else - printf("copper"); - - printf(".\n"); -#if defined(CONFIG_KORAT_PERMANENT) - printf(" Executing permanent copy of U-Boot.\n"); -#endif - return 0; -} - -#if defined(CONFIG_PCI) && defined(CONFIG_PCI_PNP) -/* - * Assign interrupts to PCI devices. - */ -void board_pci_fixup_irq(struct pci_controller *hose, pci_dev_t dev) -{ - pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, VECNUM_EIRQ2); -} -#endif - -/* - * pci_target_init - * - * The bootstrap configuration provides default settings for the pci - * inbound map (PIM). But the bootstrap config choices are limited and - * may not be sufficient for a given board. - */ -#if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) -void pci_target_init(struct pci_controller *hose) -{ - /* First do 440EP(x) common setup */ - __pci_target_init(hose); - - /* - * Set up Configuration registers for on-board NEC uPD720101 USB - * controller. - */ - pci_write_config_dword(PCI_BDF(0x0, 0xC, 0x0), 0xE4, 0x00000020); -} -#endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[4]; - int rc; - - ft_cpu_setup(blob, bd); - - /* Fixup NOR mapping */ - val[0] = 1; /* chip select number */ - val[1] = 0; /* always 0 */ - val[2] = gd->bd->bi_flashstart; - val[3] = gd->bd->bi_flashsize - CONFIG_SYS_FLASH0_SIZE; - rc = fdt_find_and_setprop(blob, "/plb/opb/ebc", "ranges", - val, sizeof(val), 1); - if (rc) - printf("Unable to update property NOR mapping, err=%s\n", - fdt_strerror(rc)); - - return 0; -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ diff --git a/board/korat/u-boot-F7FC.lds b/board/korat/u-boot-F7FC.lds deleted file mode 100644 index bee4d9a..0000000 --- a/board/korat/u-boot-F7FC.lds +++ /dev/null @@ -1,124 +0,0 @@ -/* - * (C) Copyright 2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - .resetvec 0xF7FBFFFC : - { - *(.resetvec) - } = 0xffff - - .bootpg 0xF7FBF000 : - { - arch/powerpc/cpu/ppc4xx/start.o (.bootpg) - } = 0xffff - - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/ppc4xx/start.o (.text) - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x00FF) & 0xFFFFFF00; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - . = ALIGN(4); - } - - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/configs/korat_defconfig b/configs/korat_defconfig deleted file mode 100644 index d363aab..0000000 --- a/configs/korat_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_KORAT=y diff --git a/configs/korat_perm_defconfig b/configs/korat_perm_defconfig deleted file mode 100644 index 8c6b4c4..0000000 --- a/configs/korat_perm_defconfig +++ /dev/null @@ -1,4 +0,0 @@ -CONFIG_SYS_EXTRA_OPTIONS="KORAT_PERMANENT" -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_KORAT=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 1f2320b..59d2142 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,7 @@ The list should be sorted in reverse chronological order. Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +korat powerpc ppc4xx - - Larry Johnson <lrj@acm.org> galaxy5200 powerpc mpc5xxx - - Eric Millbrandt <emillbrandt@dekaresearch.com> W7OLMC powerpc ppc4xx - - Erik Theisen <etheisen@mindspring.com> W7OLMG powerpc ppc4xx - - Erik Theisen <etheisen@mindspring.com> diff --git a/include/configs/korat.h b/include/configs/korat.h deleted file mode 100644 index 5494a60..0000000 --- a/include/configs/korat.h +++ /dev/null @@ -1,550 +0,0 @@ -/* - * (C) Copyright 2007-2009 - * Larry Johnson, lrj@acm.org - * - * (C) Copyright 2006-2007 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2006 - * Jacqueline Pira-Ferriol, AMCC/IBM, jpira-ferriol@fr.ibm.com - * Alain Saurel, AMCC/IBM, alain.saurel@fr.ibm.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * korat.h - configuration for Korat board - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_440EPX 1 /* Specific PPC440EPx */ -#define CONFIG_SYS_CLK_FREQ 33333333 - -#ifdef CONFIG_KORAT_PERMANENT -#define CONFIG_SYS_TEXT_BASE 0xFFFA0000 -#else -#define CONFIG_SYS_TEXT_BASE 0xF7F60000 -#endif - -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */ -#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r */ - -/* - * Manufacturer's information serial EEPROM parameters - */ -#define MAN_DATA_EEPROM_ADDR 0x53 /* EEPROM I2C address */ -#define MAN_INFO_FIELD 2 -#define MAN_INFO_LENGTH 9 -#define MAN_MAC_ADDR_FIELD 3 -#define MAN_MAC_ADDR_LENGTH 12 - -/* - * Base addresses -- Note these are effective addresses where the actual - * resources get mapped (not physical addresses). - */ -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kiB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserve 256 kiB for malloc() */ - -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CONFIG_SYS_FLASH0_SIZE 0x01000000 -#define CONFIG_SYS_FLASH0_ADDR (-CONFIG_SYS_FLASH0_SIZE) -#define CONFIG_SYS_FLASH1_TOP 0xF8000000 -#define CONFIG_SYS_FLASH1_MAX_SIZE 0x08000000 -#define CONFIG_SYS_FLASH1_ADDR (CONFIG_SYS_FLASH1_TOP - CONFIG_SYS_FLASH1_MAX_SIZE) -#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH1_ADDR /* start of FLASH */ -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_OCM_BASE 0xe0010000 /* ocm */ -#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_OCM_BASE -#define CONFIG_SYS_PCI_BASE 0xe0000000 /* Internal PCI regs */ -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_PCI_MEMBASE2 (CONFIG_SYS_PCI_MEMBASE + 0x20000000) - -#define CONFIG_SYS_USB2D0_BASE 0xe0000100 -#define CONFIG_SYS_USB_DEVICE 0xe0000000 -#define CONFIG_SYS_USB_HOST 0xe0000400 -#define CONFIG_SYS_CPLD_BASE 0xc0000000 - -/* - * Initial RAM & stack pointer - */ -/* 440EPx has 16KB of internal SRAM, so no need for D-Cache */ -#undef CONFIG_SYS_INIT_RAM_DCACHE -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_BASE /* OCM */ -#define CONFIG_SYS_INIT_RAM_SIZE (4 << 10) -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() -#define CONFIG_SYS_EXT_SERIAL_CLOCK 11059200 /* ext. 11.059MHz clk */ -#define CONFIG_BAUDRATE 115200 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -/* - * Environment - */ -#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environ vars */ - -/* - * FLASH related - */ -#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ -#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ -#define CONFIG_FLASH_CFI_LEGACY /* Allow hard-coded config for FLASH0 */ - -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH1_ADDR, CONFIG_SYS_FLASH0_ADDR } - -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* max number of sectors on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ -#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protection */ - -#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ -#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* don't warn upon unknown flash */ - -#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH1_TOP - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/* - * DDR SDRAM - */ -#define CONFIG_DDR_DATA_EYE /* use DDR2 optimization */ -#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for setup */ -#define CONFIG_ZERO_SDRAM /* Zero SDRAM after setup */ -#define CONFIG_DDR_ECC /* Use ECC when available */ -#define SPD_EEPROM_ADDRESS {0x50} -#define CONFIG_PROG_SDRAM_TLB -#define CONFIG_SYS_MEM_TOP_HIDE (4 << 10) /* don't use last 4 KiB as */ - /* per 440EPx Errata CHIP_11 */ - -/* - * I2C - */ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F - -#define CONFIG_SYS_I2C_MULTI_EEPROMS -#define CONFIG_SYS_I2C_EEPROM_ADDR (0xa8>>1) -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 -#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 - -/* I2C RTC */ -#define CONFIG_RTC_M41T60 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* I2C SYSMON (LM73) */ -#define CONFIG_DTT_LM73 1 /* National Semi's LM73 */ -#define CONFIG_DTT_SENSORS {2} /* Sensor addresses */ -#define CONFIG_SYS_DTT_MAX_TEMP 70 -#define CONFIG_SYS_DTT_MIN_TEMP -30 - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \\\"run flash_cf\\\" to mount from CompactFlash(R);" \ - "echo" - -#undef CONFIG_BOOTARGS - -/* Setup some board specific values for the default environment variables */ -#define CONFIG_HOSTNAME korat - -/* Note: kernel_addr and ramdisk_addr assume that FLASH1 is 64 MiB. */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "u_boot=korat/u-boot.bin\0" \ - "load=tftp 200000 ${u_boot}\0" \ - "update=protect off F7F60000 F7FBFFFF;erase F7F60000 F7FBFFFF;" \ - "cp.b ${fileaddr} F7F60000 ${filesize};protect on " \ - "F7F60000 F7FBFFFF\0" \ - "upd=run load update\0" \ - "bootfile=korat/uImage\0" \ - "dtb=korat/korat.dtb\0" \ - "kernel_addr=F4000000\0" \ - "ramdisk_addr=F4400000\0" \ - "dtb_addr=F41E0000\0" \ - "udl=tftp 200000 ${bootfile}; erase F4000000 F41DFFFF; " \ - "cp.b ${fileaddr} F4000000 ${filesize}\0" \ - "udd=tftp 200000 ${dtb}; erase F41E0000 F41FFFFF; " \ - "cp.b ${fileaddr} F41E0000 ${filesize}\0" \ - "ll=setenv kernel_addr 200000; setenv dtb_addr 1000000; " \ - "tftp ${kernel_addr} ${uImage}; tftp ${dtb_addr} " \ - "${dtb}\0" \ - "rd_size=73728\0" \ - "ramargs=setenv bootargs root=/dev/ram rw " \ - "ramdisk_size=${rd_size}\0" \ - "usbdev=sda1\0" \ - "usbargs=setenv bootargs root=/dev/${usbdev} ro rootdelay=10\0" \ - "rootpath=/opt/eldk/ppc_4xxFP\0" \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "pciclk=33\0" \ - "addide=setenv bootargs ${bootargs} ide=reverse " \ - "idebus=${pciclk}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\ - "flash_cf=run usbargs addide addip addtty; " \ - "bootm ${kernel_addr} - ${dtb_addr}\0" \ - "flash_nfs=run nfsargs addide addip addtty; " \ - "bootm ${kernel_addr} - ${dtb_addr}\0" \ - "flash_self=run ramargs addip addtty; " \ - "bootm ${kernel_addr} ${ramdisk_addr} ${dtb_addr}\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_cf" - -#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_PPC4xx_EMAC -#define CONFIG_IBM_EMAC4_V4 1 -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 2 /* PHY address, See schematics */ -#define CONFIG_PHY_DYNAMIC_ANEG 1 - -#undef CONFIG_PHY_RESET /* Don't do software PHY reset */ -#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ - -#define CONFIG_HAS_ETH0 -#define CONFIG_SYS_RX_ETH_BUFFER 32 /* Number of ethernet rx */ - /* buffers & descriptors */ -#define CONFIG_HAS_ETH1 1 /* add support for "eth1addr" */ -#define CONFIG_PHY1_ADDR 3 - -/* USB */ -#define CONFIG_USB_OHCI -#define CONFIG_USB_STORAGE - -/* Comment this out to enable USB 1.1 device */ -#define USB_2_0_DEVICE - -/* Partitions */ -#define CONFIG_MAC_PARTITION -#define CONFIG_DOS_PARTITION -#define CONFIG_ISO_PARTITION - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME -#define CONFIG_BOOTP_SUBNETMASK - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DATE -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DTT -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_EEPROM -#define CONFIG_CMD_ELF -#define CONFIG_CMD_FAT -#define CONFIG_CMD_I2C -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_MII -#define CONFIG_CMD_NET -#define CONFIG_CMD_NFS -#define CONFIG_CMD_PCI -#define CONFIG_CMD_PING -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SDRAM -#define CONFIG_CMD_USB - -/* POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_CACHE | \ - CONFIG_SYS_POST_CPU | \ - CONFIG_SYS_POST_ECC | \ - CONFIG_SYS_POST_ETHER | \ - CONFIG_SYS_POST_FPU | \ - CONFIG_SYS_POST_I2C | \ - CONFIG_SYS_POST_MEMORY | \ - CONFIG_SYS_POST_RTC | \ - CONFIG_SYS_POST_SPR | \ - CONFIG_SYS_POST_UART) - -#define CONFIG_LOGBUFFER -#define CONFIG_SYS_POST_CACHE_ADDR 0xC8000000 /* free virtual address */ - -#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* Otherwise it catches logbuffer as output */ - -#define CONFIG_SUPPORT_VFAT - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#define CONFIG_LOOPW 1 /* enable loopw command */ -#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */ -#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ -#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */ - -/* - * Korat-specific options - */ -#define CONFIG_SYS_KORAT_MAN_RESET_MS 10000 /* timeout for manufacturer reset */ - -/* - * PCI stuff - */ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_SYS_PCI_CACHE_LINE_SIZE 0 /* to avoid problems with PNP */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ -#define CONFIG_SYS_PCI_TARGBASE 0x80000000 /* PCIaddr mapped to */ - /* CONFIG_SYS_PCI_MEMBASE */ -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT -#define CONFIG_SYS_PCI_MASTER_INIT -#define CONFIG_SYS_PCI_BOARD_FIXUP_IRQ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x10e8 /* AMCC */ -#define CONFIG_SYS_PCI_SUBSYS_ID 0xcafe /* Whatever */ - -/* - * For booting Linux, the board info and command line data have to be in the - * first 8 MB of memory, since this is the maximum mapped by the Linux kernel - * during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * External Bus Controller (EBC) Setup - */ - -/* Memory Bank 0 (NOR-FLASH) initialization */ -#if CONFIG_SYS_FLASH0_SIZE == 0x01000000 -#define CONFIG_SYS_EBC_PB0AP 0x04017300 -#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH0_ADDR | 0x0009A000) -#elif CONFIG_SYS_FLASH0_SIZE == 0x04000000 -#define CONFIG_SYS_EBC_PB0AP 0x04017300 -#define CONFIG_SYS_EBC_PB0CR (CONFIG_SYS_FLASH0_ADDR | 0x000DA000) -#else -#error Unable to configure chip select for current CONFIG_SYS_FLASH0_SIZE -#endif - -/* Memory Bank 1 (NOR-FLASH) initialization */ -#if CONFIG_SYS_FLASH1_MAX_SIZE == 0x08000000 -#define CONFIG_SYS_EBC_PB1AP 0x04017300 -#define CONFIG_SYS_EBC_PB1CR (CONFIG_SYS_FLASH1_ADDR | 0x000FA000) -#else -#error Unable to configure chip select for current CONFIG_SYS_FLASH1_MAX_SIZE -#endif - -/* Memory Bank 2 (CPLD) initialization */ -#define CONFIG_SYS_EBC_PB2AP 0x04017300 -#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_CPLD_BASE | 0x00038000) - -/* - * GPIO Setup - * - * Korat GPIO usage: - * - * Init. - * Pin Source I/O value Function - * ------ ------ --- ----- --------------------------------- - * GPIO00 Alt1 I/O x PerAddr07 - * GPIO01 Alt1 I/O x PerAddr06 - * GPIO02 Alt1 I/O x PerAddr05 - * GPIO03 GPIO x x GPIO03 to expansion bus connector - * GPIO04 GPIO x x GPIO04 to expansion bus connector - * GPIO05 GPIO x x GPIO05 to expansion bus connector - * GPIO06 Alt1 O x PerCS1 (2nd NOR flash) - * GPIO07 Alt1 O x PerCS2 (CPLD) - * GPIO08 Alt1 O x PerCS3 to expansion bus connector - * GPIO09 Alt1 O x PerCS4 to expansion bus connector - * GPIO10 Alt1 O x PerCS5 to expansion bus connector - * GPIO11 Alt1 I x PerErr - * GPIO12 GPIO O 0 ATMega !Reset - * GPIO13 GPIO x x Test Point 2 (TP2) - * GPIO14 GPIO O 1 Write protect EEPROM #1 (0xA8) - * GPIO15 GPIO O 0 CPU Run LED !On - * GPIO16 Alt1 O x GMC1TxD0 - * GPIO17 Alt1 O x GMC1TxD1 - * GPIO18 Alt1 O x GMC1TxD2 - * GPIO19 Alt1 O x GMC1TxD3 - * GPIO20 Alt1 I x RejectPkt0 - * GPIO21 Alt1 I x RejectPkt1 - * GPIO22 GPIO I x PGOOD_DDR - * GPIO23 Alt1 O x SCPD0 - * GPIO24 Alt1 O x GMC0TxD2 - * GPIO25 Alt1 O x GMC0TxD3 - * GPIO26 GPIO? I/O x IIC0SDA (selected in SDR0_PFC4) - * GPIO27 GPIO O 0 PHY #0 1000BASE-X select - * GPIO28 GPIO O 0 PHY #1 1000BASE-X select - * GPIO29 GPIO I x Test jumper !Present - * GPIO30 GPIO I x SFP module #0 !Present - * GPIO31 GPIO I x SFP module #1 !Present - * - * GPIO32 GPIO O 1 SFP module #0 Tx !Enable - * GPIO33 GPIO O 1 SFP module #1 Tx !Enable - * GPIO34 Alt2 I x !UART1_CTS - * GPIO35 Alt2 O x !UART1_RTS - * GPIO36 Alt1 I x !UART0_CTS - * GPIO37 Alt1 O x !UART0_RTS - * GPIO38 Alt2 O x UART1_Tx - * GPIO39 Alt2 I x UART1_Rx - * GPIO40 Alt1 I x IRQ0 (Ethernet 0) - * GPIO41 Alt1 I x IRQ1 (Ethernet 1) - * GPIO42 Alt1 I x IRQ2 (PCI interrupt) - * GPIO43 Alt1 I x IRQ3 (System Alert from CPLD) - * GPIO44 xxxx x x (grounded through pulldown) - * GPIO45 GPIO O 0 PHY #0 Enable - * GPIO46 GPIO O 0 PHY #1 Enable - * GPIO47 GPIO I x Reset switch !Pressed - * GPIO48 GPIO I x Shutdown switch !Pressed - * GPIO49 xxxx x x (reserved for trace port) - * . . . . . - * . . . . . - * . . . . . - * GPIO63 xxxx x x (reserved for trace port) - */ - -#define CONFIG_SYS_GPIO_ATMEGA_RESET_ 12 -#define CONFIG_SYS_GPIO_ATMEGA_SS_ 13 -#define CONFIG_SYS_GPIO_PHY0_FIBER_SEL 27 -#define CONFIG_SYS_GPIO_PHY1_FIBER_SEL 28 -#define CONFIG_SYS_GPIO_SFP0_PRESENT_ 30 -#define CONFIG_SYS_GPIO_SFP1_PRESENT_ 31 -#define CONFIG_SYS_GPIO_SFP0_TX_EN_ 32 -#define CONFIG_SYS_GPIO_SFP1_TX_EN_ 33 -#define CONFIG_SYS_GPIO_PHY0_EN 45 -#define CONFIG_SYS_GPIO_PHY1_EN 46 -#define CONFIG_SYS_GPIO_RESET_PRESSED_ 47 - -/* - * PPC440 GPIO Configuration - */ -#define CONFIG_SYS_4xx_GPIO_TABLE { /* Out GPIO Alternate1 Alternate2 Alternate3 */ \ -{ \ -/* GPIO Core 0 */ \ -{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO0 EBC_ADDR(7) DMA_REQ(2) */ \ -{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO1 EBC_ADDR(6) DMA_ACK(2) */ \ -{GPIO0_BASE, GPIO_BI , GPIO_ALT1, GPIO_OUT_0}, /* GPIO2 EBC_ADDR(5) DMA_EOT/TC(2) */ \ -{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO3 EBC_ADDR(4) DMA_REQ(3) */ \ -{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO4 EBC_ADDR(3) DMA_ACK(3) */ \ -{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO5 EBC_ADDR(2) DMA_EOT/TC(3) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO6 EBC_CS_N(1) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO7 EBC_CS_N(2) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO8 EBC_CS_N(3) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO9 EBC_CS_N(4) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO10 EBC_CS_N(5) */ \ -{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO11 EBC_BUS_ERR */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO12 */ \ -{GPIO0_BASE, GPIO_DIS, GPIO_SEL , GPIO_OUT_0}, /* GPIO13 */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO14 */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO15 */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO16 GMCTxD(4) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO17 GMCTxD(5) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO18 GMCTxD(6) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO19 GMCTxD(7) */ \ -{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO20 RejectPkt0 */ \ -{GPIO0_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO21 RejectPkt1 */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO22 */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_0}, /* GPIO23 SCPD0 */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO24 GMCTxD(2) */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO25 GMCTxD(3) */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO26 */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO27 EXT_EBC_REQ USB2D_RXERROR */ \ -{GPIO0_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO28 USB2D_TXVALID */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO29 EBC_EXT_HDLA USB2D_PAD_SUSPNDM */ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO30 EBC_EXT_ACK USB2D_XCVRSELECT*/ \ -{GPIO0_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO31 EBC_EXR_BUSREQ USB2D_TERMSELECT*/ \ -}, \ -{ \ -/* GPIO Core 1 */ \ -{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO32 USB2D_OPMODE0 EBC_DATA(2) */ \ -{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_1}, /* GPIO33 USB2D_OPMODE1 EBC_DATA(3) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO34 UART0_DCD_N UART1_DSR_CTS_N UART2_SOUT*/ \ -{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO35 UART0_8PIN_DSR_N UART1_RTS_DTR_N UART2_SIN*/ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO36 UART0_8PIN_CTS_N EBC_DATA(0) UART3_SIN*/ \ -{GPIO1_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1}, /* GPIO37 UART0_RTS_N EBC_DATA(1) UART3_SOUT*/ \ -{GPIO1_BASE, GPIO_OUT, GPIO_ALT2, GPIO_OUT_1}, /* GPIO38 UART0_DTR_N UART1_SOUT */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT2, GPIO_OUT_0}, /* GPIO39 UART0_RI_N UART1_SIN */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO40 UIC_IRQ(0) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO41 UIC_IRQ(1) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO42 UIC_IRQ(2) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_ALT1, GPIO_OUT_0}, /* GPIO43 UIC_IRQ(3) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO44 UIC_IRQ(4) DMA_ACK(1) */ \ -{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO45 UIC_IRQ(6) DMA_EOT/TC(1) */ \ -{GPIO1_BASE, GPIO_OUT, GPIO_SEL , GPIO_OUT_0}, /* GPIO46 UIC_IRQ(7) DMA_REQ(0) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO47 UIC_IRQ(8) DMA_ACK(0) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO48 UIC_IRQ(9) DMA_EOT/TC(0) */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO49 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO50 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO51 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO52 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO53 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO54 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO55 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO56 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO57 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO58 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO59 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO60 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO61 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO62 Unselect via TraceSelect Bit */ \ -{GPIO1_BASE, GPIO_IN , GPIO_SEL , GPIO_OUT_0}, /* GPIO63 Unselect via TraceSelect Bit */ \ -} \ -} - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -/* Pass open firmware flat tree */ -#define CONFIG_OF_LIBFDT 1 -#define CONFIG_OF_BOARD_SETUP 1 - -#endif /* __CONFIG_H */ |